TRENDnet Computer Accessories TV IP212W User Manual

Quick Installation Guide  
TV-IP212/TV-IP212W  
TV-IP312/TV-IP312W  
1. Before You Start  
Package Contents  
?TV-IP212/TV-IP212W/TV-IP312/  
TV-IP312W  
?Quick Installation Guide  
?Utility CD-ROM  
?Camera Stand  
?RJ-45 Cable  
?AC Power Adapter (5V, 2.5A)  
?1 x 2dBi Detachable Antenna  
(TV-IP212W/TV-IP312W)  
System Requirements  
?10/100Mbps Ethernet  
?CPU: 1GHz processor or above  
?Memory: 256MB RAM or above/ 512MB RAM or above (Windows Vista)  
?VGA Resolution: 800 x 600 or above  
?Web Brower: Internet Exploreer (6.0 or higher)  
?Windows Vista/XP/2000  
1
English  
Application  
2-Way Audio  
Internet Camera Server  
(TV-IP212/TV-IP312)  
TV-IP212  
TV-IP312  
Cable/DSL 4-Port  
Broadband Router  
(TW100-S4W1CA))  
Internet  
Notebook with  
PC Card  
(TE100-PCBUSR)  
Modem  
Mobile Phone with  
3G Support & Service  
10/100Mbps  
Wireless 2-Way Audio  
Internet Camera Server  
(TV-IP212W/TV-IP312W)  
TV-IP212W  
TV-IP312W  
Wireless Firewall Router  
(TEW-432BRP)  
Internet  
Notebook with  
Wireless PC Card  
(TEW-421PC)  
Mobile Phone with  
3G Support & Service  
Modem  
54Mbps  
2
English  
2. Hardware Installation  
1. Attach the Antenna. (TV-IP212W/  
TV-IP312W)  
2. Connect a RJ-45 network cable  
from a Switch/Router to the  
Ethernet port of the Internet  
Camera.  
3. Connect external speaker to the  
Internet Camera Server (optional)  
4. Connect the AC Power Adapter to  
the Internet Camera Server and  
then to a power outlet.  
5. Connect USB flash drive to the  
Internet Camera Server (optional)  
6. Verify the Power and Link LEDs  
are on (TV-IP312W is shown).  
3
English  
3. Configure the Internet Camera  
Note: It is recommended that you configure the Internet Camera from a wired  
computer. Before the Internet Camera can be configured, a Static IP address  
must be assigned on your computer's network adapter in the subnet of  
192.168.10.x. Since the Internet Camera's default IP address is  
192.168.10.30, make sure no other network devices are assigned an IP  
address of 192.168.10.30. (Refer to the Troubleshooting section on how to  
configure TCP/IP settings on your PC.)  
1. Open your web browser, type  
Addres bar, and press Enter.  
2. Enter user name and password,  
then click OK.  
User name: admin  
Password: admin  
3. Right click and select Active X  
Control.  
4
English  
4. Click Install.  
5. Click Setup and then click  
Network. Configure the network  
settings to be in the same subnet  
as your network. Then click  
Apply.  
6. Click Network and then click  
Wireless. Configure your wireless  
settings to match your wireless  
network's settings and then click  
Apply (Enable/Enter the  
WEP/WPA key when your wireless  
network is encrypted. Contact  
your network administrator for  
more information).  
(TV-IP212W/TV-IP312W only)  
5
English  
7. Disconnect the RJ-45 cable  
(TV-IP212W/TV-IP312W).  
8. Verify the Power and Link LEDs  
are on.  
Note: The TV-IP212W/TV-IP312W will not work wirelessly until you disconnect  
the Ethernet cable from the back of the camera.  
9. Click Live View. Then click  
MJPEG compression if you are  
using Firefox or Safari browser.  
Your installation is now complete.  
Note: For detailed information regarding the TV-IP212/TV-IP212W/TV-  
IP312/TV-IP312W configuration and advanced settings, please refer to the  
Troubleshooting section, User's Guide on the Utility CD-ROM, or TRENDnet's  
Register Your Product  
To ensure the highest level of customer service and support, please take a moment to  
register your product Online at: www.trendnet.com/register  
Thank you for choosing TRENDnet  
6
English  
Troubleshooting  
Q1: How do I configure TCP/IP settings on my computer?  
1. Go into the Control Panel and double-click  
the Network Connections icon, and then  
right-click the Local Area Connection icon  
and then click Properties.  
2. Click Internet Protocol (TCP/IP) and then  
click Properties. Then click on Use the  
following IP address, and make sure you  
assign your network adapter an IP address  
in the subnet of 192.168.10.x.  
Q2: The Image is blurry. How can I adjust the focus on the Internet camera?  
A2: You can adjust the Internet Camera’s focus by rotating the lens.  
Q3: When I click on Live View the image does not load?  
A3: First, make sure that you are using a browser that supports Active X (Internet Explorer)  
or Java (Firefox or Safari). Second, make sure that Active X or Java is installed.  
Q4: How do I connect the TV-IP212W/TV-IP312W to my wireless router or access point?  
A4: Make sure that you configure the camera to have the same SSID, encryption mode and  
key (if enabled). Follow the instructions in section 2 to configure the camera with the SSID  
and encryption key.  
Q5: After I successfully configured the TV-IP212W/TV-IP312W to match my wireless network  
settings, I can not connect to the camera.  
A5: First, verify that the wireless settings match your wireless network settings. Second,  
verify in the wireless section of the browser configuration that the Enable option is checked.  
Third, make sure to disconnect the Ethernet cable from the camera and verify that the LINK  
LED is blinking green.  
Q6: I forgot my password. What should I do?  
A6: Take a pin or paperclip and press the reset button on the back of the unit for 15 seconds.  
This will return settings back to factory defaults. The default IP address is 192.168.10.30.  
The default administrator ID and password is admin.  
If you still encounter problems or have any questions regarding the TV-IP212/TV-IP212W/  
TV-IP312/TV-IP312W, please contact TRENDnet’s Technical Support Department.  
7
Certifications  
This equipment has been tested and found to comply with FCC and CE Rules.  
Operation is subject to the following two conditions:  
(1) This device may not cause harmful interference.  
(2) This device must accept any interference received. Including interference that may  
cause undesired operation.  
Waste electrical and electronic products must not  
be disposed of with household waste. Please  
recycle where facilities exist. Check with you Local  
Authority or Retailer for recycling advice.  
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV  
INTERFERENCE CAUSED BY UNAUTHORIZED MODIFICATIONS TO THIS  
EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER’S AUTHORITY TO  
OPERATE THE EQUIPMENT.  
ADVERTENCIA  
En todos nuestros equipos se mencionan claramente las caracteristicas del adaptador de  
alimentacón necesario para su funcionamiento. El uso de un adaptador distinto al  
mencionado puede producir daños fisicos y/o daños al equipo conectado. El adaptador  
de alimentación debe operar con voltaje y frecuencia de la energia electrica domiciliaria  
existente en el pais o zona de instalación.  
TRENDnet Technical Support  
.
US Canada  
Toll Free Telephone: 1(866) 845-3673  
24/7 Tech Support  
.
.
.
.
.
Europe (Germany France Italy Spain Switzerland UK)  
Toll Free Telephone: +00800 60 76 76 67  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Worldwide  
Telephone: +(31) (0) 20 504 05 35  
English/Espanol - 24/7  
Francais/Deutsch - 11am-8pm, Monday - Friday MET  
Product Warranty Registration  
Please take a moment to register your product online.  
20675 Manhattan Place  
Torrance, CA 90501  
USA  
Copyright ©2007. All Rights Reserved. TRENDnet.  

Sony CDX L360 User Manual
Sony CDX HR905IP User Manual
Seagate MEDALIST PRO 2160N User Manual
Seagate CONSTELLATION ES2 SERIAL ATA ST33000651NS User Manual
Seagate BARRACUDA 720011 SERIAL ATA ST3640330AS User Manual
Samsung GH68 26316A User Manual
Samsung E340 User Manual
Pioneer CD Player CDJ 850 User Manual
Panasonic SL PD1348 User Manual
Nokia 7900 Prism User Manual