Superior Z250A User Manual

User guide  
Z250a  
This is the Internet version of the User's guide. © Print only for private use.  
Prepare the phone  
Always turn off your phone and detach the charger  
before you insert or remove the SIM card.  
To insert the SIM card and battery  
1 Remove the battery cover by sliding the battery  
release latch down.  
2 Slide the SIM card into its holder with the contacts  
facing down.  
3 Insert the battery with the label side up and the  
connectors facing each other.  
4 Slide the battery cover into place and close the battery  
release latch.  
3
This is the Internet version of the User's guide. © Print only for private use.  
Charge the battery  
Your phone battery is partly charged when you buy it. It  
takes approximately 3 hours to fully charge the battery.  
It may take 30 minutes for the battery icon to appear  
on the screen.  
To charge the battery  
1 Connect the charger to the phone. Press a key  
to view the charging status on the screen.  
2 To remove the charger, tilt the plug upwards.  
You can use the phone during charging. You can  
charge the battery for more or less than 3 hours.  
Interrupted charging will not damage the battery.  
4
This is the Internet version of the User's guide. © Print only for private use.  
Turn the phone on  
To turn on the phone  
1 Press and hold down  
2 Enter your PIN if  
.
requested. To correct  
mistakes, press  
3 Select OK.  
.
4 Select a language.  
5 At first start-up, select Yes  
to use the setup wizard to make a phone setup.  
Select No to use the setup wizard later.  
After you have turned the phone on and entered  
your PIN, the name of your operator appears on  
the screen. This view or screen is called standby.  
You can now make and receive calls.  
To turn off the phone  
Press and hold down  
.
To use the setup wizard  
From standby select Menu > Settings > General  
> Setup wizard > Basic setup.  
5
This is the Internet version of the User's guide. © Print only for private use.  
SIM card  
The SIM (Subscriber Identity Module) card, which  
you get from your network operator, contains  
information about your subscription. Always turn  
off your phone and detach the charger before you  
insert or remove the SIM card.  
You can save contacts on the SIM card before removing  
if from your phone. Contacts may also be saved in the  
phone memory. See Contacts on page 17.  
PIN code (SIM card lock)  
The PIN (Personal Identification Number) code is a SIM  
card lock that protects your subscription, but not the  
phone itself. If the card is locked, you have to enter the  
PIN code when you turn on your phone. Each PIN digit  
appears as *, unless it starts with emergency number  
digits, for example, 112 or 911. You can call an  
emergency number without entering a PIN.  
If you enter the wrong PIN three times in a row,  
the following message appears: PIN blocked. To  
unblock, enter your PUK code provided by your  
network operator. To unblock your SIM card, see  
Locks on page 34.  
6
This is the Internet version of the User's guide. © Print only for private use.  
Menu overview  
Calls  
Internet  
Games  
Camera  
Messaging  
File manager  
Write new  
Inbox  
Camera album  
Pictures  
Drafts  
Outbox  
Ringtones  
Themes  
Sent messages  
Saved messages  
Call voicemail  
Templates  
Settings  
Bookmarks  
Games  
Applications  
Other  
Organizer  
Contacts  
Settings  
Online services  
Alarms  
Applications  
Calendar  
Tasks  
Options  
New contact  
General  
Sounds & alerts  
Display  
Calls  
Connectivity  
Notes  
Calculator  
Timer  
Stopwatch  
Some menus and icons described in this document may  
vary depending on operator, network or subscription. Some  
options may vary when the default settings are changed.  
7
This is the Internet version of the User's guide. © Print only for private use.  
Phone overview  
Network  
coverage  
Battery status  
Function for  
left selection  
key  
Function for  
right selection  
key  
Calls  
Menu  
Internet key  
Navigation key  
Left selection  
key  
Right  
selection key  
Camera key  
Back key  
Volume  
buttons  
C key (Clear)  
On/off key  
Charging  
(USB  
connector)  
Infrared port  
Microphone  
8
This is the Internet version of the User's guide. © Print only for private use.  
Network coverage  
The network bars show the strength of the GSM network.  
Move to another location if you have network problems.  
No netw. coverage means you are out of range.  
= Good network coverage  
= Average network coverage  
Battery status  
= The phone battery is fully charged  
= The phone battery is empty  
The outside  
Camera lens  
Icon display  
9
This is the Internet version of the User's guide. © Print only for private use.  
Icons  
These icons may appear in your phone.  
Icon Description  
Battery charging, appears with battery icon.  
You have missed a call. See Calling on page 15.  
The phone is set to silent.  
You have received a new text message.  
You have received a new picture message.  
Ongoing call.  
Divert calls is activated.  
An alarm is activated.  
The loudspeaker is on.  
The infrared port is activated.  
The stopwatch is activated.  
10  
This is the Internet version of the User's guide. © Print only for private use.  
Shortcuts  
From standby you can use the navigation keys to go  
directly to a function:  
Press  
Press  
Press  
to start the camera.  
to write a message.  
to go to your contacts.  
To change a standby shortcut, go to Menu > Settings  
> General > Shortcuts. The camera shortcut cannot  
be changed.  
To navigate the menus  
From standby select Menu and  
press  
Press  
,
,
or  
.
to go back one step  
in the menu.  
Press and hold down  
to standby.  
to return  
Press  
or  
to move between tabs.  
To delete items  
Press  
.
To set the phone to silent  
Press and hold down  
to set silent mode on or off.  
To view tips and tricks  
From standby select Menu > Settings > General  
> Setup wizard > Tips and tricks.  
11  
This is the Internet version of the User's guide. © Print only for private use.  
Messaging  
Your phone supports various messaging services.  
See Entering text on page 30 for instructions on how  
to enter text and numbers.  
Text messages  
You need a service centre number from your  
network operator to be able to send text messages.  
To view and set the service centre number  
1 From standby select Menu > Messaging > Settings  
> Text message > Service centre.  
2 If there is no number, select New ServiceCentre, enter  
the number including the international “+” prefix and  
country code. Select Save.  
To write and send a text message  
1 From standby select Menu > Messaging > Write new  
> Text message.  
2 Write the message and select Continue. (To save the  
message for later, press  
and select Yes to save  
in Drafts.)  
3 Select Enter phone no., enter the number and  
select OK.  
4 Select Send.  
12  
This is the Internet version of the User's guide. © Print only for private use.  
Picture messages  
Picture messages can contain enhanced functionality  
with text, sound and pictures.  
You need the correct Internet (MMS) settings in your  
request a text message with the settings or contact  
your network operator.  
To create and send a picture message  
1 From standby select Menu > Messaging > Write new  
> Picture msg.  
2 Select More and select an item to follow your message.  
3 Write the message and select OK > Continue.  
4 Select Enter phone no., enter the number and  
select OK.  
5 Select Send.  
To save an item in a picture message  
1 In the message, select More > Save items.  
2 Select an item and where to save it.  
To delete all sent messages  
1 From standby select Menu > Messaging > Sent  
messages.  
2 Select More > Delete all msgs > Yes.  
13  
This is the Internet version of the User's guide. © Print only for private use.  
Automatic download  
Select how to download your picture messages.  
To select a download option  
1 From standby select Menu > Messaging > Settings  
> Picture message > Auto download.  
2 Select an option:  
Always – automatic download.  
Ask in roaming – ask to download when not in home  
network.  
Not in roaming – do not download when not in home  
network.  
Always ask – ask to download.  
Off – new messages appear in the inbox as icons.  
Select the message and select View to download.  
Receiving messages  
To view and save a message from the inbox  
1 From standby select Menu > Messaging > Inbox.  
2 Scroll to a message and select View. If you want to  
save the message, select More > Save message  
> Saved messages (SIM card) or > Templates (phone).  
To delete messages from the inbox  
1 From standby select Menu > Messaging > Inbox.  
2 Select More > Delete all msgs > All > Yes to delete  
all messages. To delete one message, scroll to the  
message and select More > Delete > Yes.  
14  
This is the Internet version of the User's guide. © Print only for private use.  
Calling  
Your phone must be on and within range of a network.  
To make a call  
1 From standby enter the area code and phone number.  
2 Select Call.  
To make an emergency call  
From standby enter 112 (the international emergency  
number) and select Call.  
You can make emergency calls without a SIM card  
and without entering a PIN.  
To make an international call  
1 From standby press  
until a + sign appears.  
2 Enter the country code, area code (without the first  
zero), phone number and select Call.  
To end a call  
Close the phone or select End call.  
To answer a call  
When the phone rings, select Answer.  
To reject a call  
When the phone rings, select Busy.  
To view missed calls  
When Missed calls: is displayed, select Yes.  
To call back, scroll to a number and select Call.  
15  
This is the Internet version of the User's guide. © Print only for private use.  
 
To turn the loudspeaker on during a call  
Select More > Turn on speaker.  
Do not hold the phone to your ear when using the  
loudspeaker. This could damage your hearing.  
To change the ear speaker volume during a call  
Press or  
.
To turn off the microphone during a call  
Press and hold down . To resume, press and hold  
down again.  
Call list  
You can view information about recent calls.  
To call a number from the call list  
1 From standby select Calls and scroll to a tab.  
2 Scroll to the name or number and select Call.  
To add a number to contacts  
1 From standby select Calls and scroll to a tab.  
2 Scroll to the number and select More > Save number.  
3 Select a contact or select New contact.  
4 Enter the contact information and select Save.  
To delete a number from the call list  
1 From standby select Calls and scroll to a tab.  
2 Scroll to the number and select More > Delete  
entry > Yes.  
16  
This is the Internet version of the User's guide. © Print only for private use.  
Contacts  
In Contacts you can save contact information with  
name, numbers, addresses, picture, ringtone, title,  
personal information and birthday.  
See Entering text on page 30 for instructions on how  
to enter text and numbers.  
To add a contact  
1 From standby select Menu > Contacts.  
2 Scroll to and select New contact > Add.  
3 Enter the name and select OK.  
4 Scroll to New number: and select Add.  
5 Enter the number and select OK.  
6 Scroll to and select the contact type.  
7 Select Save.  
Enter the + sign and country code with all phone  
numbers. They can then be used abroad or at home.  
To call a contact  
1 From standby select Menu > Contacts.  
2 Scroll to, or enter the first few letters of the contact  
and select Call.  
To delete a contact  
1 From standby select Menu > Contacts.  
2 Scroll to the contact and press  
.
17  
This is the Internet version of the User's guide. © Print only for private use.  
 
To edit a contact  
1 From standby select Menu > Contacts.  
2 Scroll to the contact and select More > Edit contact.  
3 Scroll to the contact information and select Edit.  
4 Enter information or select a picture or ringtone.  
5 Confirm and select Save.  
To send all contacts  
From standby select Menu > Contacts > Options  
> Advanced > Send all contacts and select a transfer  
method.  
To copy contacts between the phone and the SIM card  
1 From standby select Menu > Contacts > Options  
> Advanced.  
2 Select Copy to SIM or Copy from SIM.  
3 Select Copy a number or Copy all.  
4 To copy one contact, select the contact.  
When copying all contacts to the SIM card,  
all existing SIM card information is replaced.  
To check memory status for your contacts  
From standby select Menu > Contacts > Options  
> Advanced > Memory status.  
18  
This is the Internet version of the User's guide. © Print only for private use.  
Speed dialling  
Speed dialling lets you select nine contacts that you can  
dial quickly by pressing numbers 1-9.  
To add contacts to speed dial numbers  
1 From standby select Menu > Contacts > Options  
> Speed dial.  
2 Scroll to a position number and select Add.  
3 Select a contact.  
To speed dial  
From standby enter the number (1-9) and select Call.  
My number  
You can view and edit your own phone number.  
To view your own phone number  
From standby select Menu > Contacts > Options  
> Special numbers > My numbers.  
19  
This is the Internet version of the User's guide. © Print only for private use.  
Camera  
Your phone has a digital camera to take pictures to save  
or send. Use infrared or picture messages to send a  
picture to another phone or to a computer. Camera  
pictures are saved in JPEG format in the Camera album.  
To take pictures  
1 From standby press  
2 Select Capture to take the picture.  
3 Press to save and take another picture or select  
More > Delete to delete the picture.  
to start the camera.  
To use the zoom  
Use or to zoom.  
To adjust the brightness  
Use or to adjust the brightness.  
To use the camera options  
1 When the camera is activated select More.  
2 Select an option:  
Picture size – select between two sizes.  
Night mode – enhance picture quality in poor lighting.  
Self-timer – the picture is taken a few seconds after  
you press Capture.  
Effects – select different effects for your picture.  
White balance – adjust colours to lighting conditions.  
Picture quality – select picture quality.  
Shutter sound – select different shutter sounds.  
20  
This is the Internet version of the User's guide. © Print only for private use.  
To view your pictures  
1 From standby select Menu > File manager > Camera  
album.  
2 Scroll to a picture and select View.  
You can use a USB cable to exchange pictures  
between your phone and a computer. For more  
To send a picture  
1 From standby select Menu > File manager > Camera  
album.  
2 Scroll to a picture and select More > Send. Select  
a transfer method.  
To use a picture  
1 From standby select Menu > File manager > Camera  
album and scroll to a picture.  
2 Select More > Use as and select how to use the  
picture.  
on page 31.  
21  
This is the Internet version of the User's guide. © Print only for private use.  
Internet  
You need the correct Internet settings in your phone.  
If settings are not in your phone, you can:  
Get them in a text message from the network operator.  
On a computer, go to www.sonyericsson.com/support  
and request a text message with the settings.  
To select an Internet profile  
From standby select Menu > Settings > Connectivity  
> Internet settings > Internet profiles. Select a profile.  
To start browsing  
1 From standby select Menu > Internet.  
2 Select More for options:  
Go to – go to predefined pages or bookmarks, enter  
a Web address or show previously visited pages.  
Tools – add a bookmark, save a picture, refresh page  
content, send a link or make a call when browsing.  
View – select full content or text only.  
Advanced – select options such as show pictures,  
allow cookies, clear cookies, clear cache and Internet  
status.  
To stop browsing  
When you browse, select More > Exit browser.  
22  
This is the Internet version of the User's guide. © Print only for private use.  
Calendar  
You can set and send appointments with reminders.  
To add an appointment in the calendar  
1 From standby select Menu > Organizer > Calendar.  
2 Scroll to and select a date. Select New appointm.  
3 Enter the details to confirm the appointment.  
To set reminders options  
1 From standby select Menu > Organizer > Calendar  
> More > Advanced > Reminders.  
2 Select an option. Select Always for a reminder to  
sound even if the phone is off or in silent mode.  
To view a calendar week  
From standby select Menu > Organizer > Calendar  
> More > View week.  
To send an appointment  
1 From standby select Menu > Organizer > Calendar  
and select a date.  
2 Scroll to an appointment, select More > Send and  
select a transfer method.  
To find an appointment  
1 From standby select Menu > Organizer > Calendar  
> More > Advanced > Find.  
2 Enter the search string and select OK.  
23  
This is the Internet version of the User's guide. © Print only for private use.  
More functions  
File manager  
To move a file  
1 From standby select Menu > File manager.  
2 Open a folder, scroll to a file and select More > Move.  
3 Select a folder or select New folder, name the new  
folder and select OK.  
4 Select Paste.  
To rename a file  
1 From standby select Menu > File manager.  
2 Scroll to a file and select More > Rename.  
3 Enter a new name and select OK.  
Some files cannot be renamed.  
To select several files  
1 From standby select Menu > File manager and open  
a folder.  
2 Scroll to a file and select More > Mark.  
3 Select Mark several or Mark all. To select files, scroll  
and select Mark or Unmark.  
To view the memory status  
From standby select Menu > File manager > More  
> Memory status.  
If the memory is full, delete some content. Scroll  
to a file or a folder and select More > Delete.  
24  
This is the Internet version of the User's guide. © Print only for private use.  
 
Alarm  
The alarm rings even if the phone is off or set to silent.  
To set the alarm  
1 From standby select Menu > Organizer > Alarms  
> Alarm.  
2 Enter the time and select Save.  
To set the recurrent alarm  
1 From standby select Menu > Organizer > Alarms  
> Recurrent alarm.  
2 Enter the time and select Continue.  
3 Select the week days and select Done.  
To turn the sounding alarm off  
Press any key. To snooze the alarm, press Snooze.  
To set the alarm signal  
From standby select Menu > Organizer > Alarms  
> Alarm signal and select a signal.  
25  
This is the Internet version of the User's guide. © Print only for private use.  
Tasks and Notes  
To add a new task  
1 From standby select Menu > Organizer > Tasks  
> New task.  
2 Select Task or Phone call. Enter details and confirm  
each entry. Select Yes to use the reminder option.  
To make a note and save it in a list  
1 From standby select Menu > Organizer > Notes.  
2 Scroll to New note and select Add.  
3 Enter the note and select Save.  
Calculator  
To use the calculator  
1 From standby select Menu > Organizer > Calculator.  
2 Press  
or  
to select ÷ x - + . % =.  
Timer  
To use the timer  
1 From standby select Menu > Organizer > Timer.  
2 Enter the hours, minutes and seconds.  
3 Select Start.  
26  
This is the Internet version of the User's guide. © Print only for private use.  
Stopwatch  
To use the stopwatch  
1 From standby select Menu > Organizer > Stopwatch.  
2 Select Start.  
3 To view a new lap time, select New lap.  
Language  
To change the phone menu language  
From standby select Menu > Settings > General  
> Language > Phone language and select a language.  
Time and date  
To set the time and date  
1 From standby select Menu > Settings > General  
> Time & date.  
2 Select Time or Date.  
3 Enter the time or date and select Save.  
Call time and cost  
To check the call time and cost  
From standby select Menu > Settings > Calls > Time  
& cost > Call timers.  
27  
This is the Internet version of the User's guide. © Print only for private use.  
Themes  
Use themes to change the appearance of the screen.  
To set a theme  
1 From standby select Menu > Settings > Display  
> Themes.  
2 Scroll to a theme and select Set.  
Profiles  
Some phone settings are adapted to different situations,  
for example, the ring volume may be adapted to suit  
a meeting.  
To select a profile  
From standby select Menu > Settings > General  
> Profiles and select a profile to use.  
To view and edit a profile  
1 From standby select Menu > Settings > General  
> Profiles and select a profile.  
2 Select More > View and edit.  
28  
This is the Internet version of the User's guide. © Print only for private use.  
Ringtones, sounds and alerts  
Your phone has melodies that can be used as ringtones.  
To select a ringtone  
From standby select Menu > Settings > Sounds &  
alerts > Ringtone and select a ringtone.  
To set the ring volume  
1 From standby select Menu > Settings > Sounds &  
alerts > Ring volume.  
2 Press  
or  
to set a volume and select Save.  
To set the vibrating alert  
1 From standby select Menu > Settings > Sounds &  
alerts > Vibrating alert.  
2 Select an option.  
To set sounds and alerts options  
1 From standby select Menu > Settings > Sounds &  
alerts.  
2 Select an option:  
Increasing ring – select an increasing ringtone.  
Message alert – select message notification.  
Key sound – select a key press sound.  
29  
This is the Internet version of the User's guide. © Print only for private use.  
Entering text  
There are two input methods you can use to enter text;  
multitap or predictive text input.  
By using predictive text input you only have to press  
each key once. Continue writing a word even if it  
appears to be wrong. The phone uses the dictionary  
to recognize the word when all letters are entered.  
To enter text using multitap  
Press  
Press  
Press  
until the letter appears.  
to add a space.  
to enter punctuation marks.  
To enter text using predictive text input  
For example, to write the word “Land”, press  
,
,
,
.
If the word or punctuation mark is the one you want,  
press to accept and add a space. To accept  
without adding a space, press  
If the word or punctuation mark is not the one you  
want, press or to view alternatives.  
.
To add a word to the dictionary  
1 When you write, select More > Spell word.  
2 Enter the word using multitap and select Insert.  
30  
This is the Internet version of the User's guide. © Print only for private use.  
 
How to use the keys  
Press and hold down  
to change the input method.  
Press  
to shift between upper case and lower case  
letters.  
Press and hold down  
language.  
Press  
word, press and hold down  
Press and hold down  
to change the writing  
to delete characters. To delete a whole  
.
to enter numbers.  
Infrared  
Use the infrared port to exchange files such as pictures  
and ringtones with other phones or infrared devices.  
To turn on infrared  
From standby select Menu > Settings > Connectivity  
> Infrared port > On.  
To connect two devices using infrared  
1 Turn on infrared in both devices.  
2 Make sure the infrared ports are facing each other with  
a maximum distance of 20 cm (8”).  
To transfer a picture using infrared  
1 From standby select Menu > File manager > Camera  
album.  
2 Scroll to a picture and select More > Send and select  
Via infrared.  
31  
This is the Internet version of the User's guide. © Print only for private use.  
 
Diverting calls  
Divert calls, for example, to an answering service.  
To divert calls  
1 From standby select Menu > Settings > Calls > Divert  
calls.  
2 Select a call type, a divert option and select Activate.  
3 Enter the phone number and select OK.  
To cancel a call divert  
1 From standby select Menu > Settings > Calls > Divert  
calls.  
2 Select a call type, a divert option and select  
Deactivate.  
Voicemail  
Callers can leave a voicemail message when you  
cannot answer. You can get your voicemail number  
from your network operator.  
To enter your voicemail number  
1 From standby select Menu > Messaging > Settings  
> Voicemail number.  
2 Enter the voicemail number and select OK.  
To call your voicemail service  
From standby press and hold down  
.
32  
This is the Internet version of the User's guide. © Print only for private use.  
Multiple calls  
When call waiting is activated, you can handle  
multiple calls. A short sound indicates a second call.  
To activate call waiting  
From standby select Menu > Settings > Calls  
> Manage calls > Call waiting > Activate.  
To answer a second call  
Select Answer. The ongoing call is put on hold.  
To reject a second call  
Select Busy and continue with the ongoing call.  
To make a second call  
1 Select More > Add call. The ongoing call is put on hold.  
2 Enter the number and select Call.  
To switch between two calls  
Select More > Switch calls.  
To join two calls  
Select More > Join calls.  
To end calls  
1 Select End call.  
2 Select No to end both calls or Yes to end one call and  
retrieve the call on hold.  
33  
This is the Internet version of the User's guide. © Print only for private use.  
Locks  
SIM card lock  
To unblock your SIM card, you need to enter your  
PUK (Personal Unblocking Key) and PIN code,  
supplied by your network operator.  
To unblock your SIM card  
1 When PIN blocked. To unblock, enter your PUK code  
provided by your network operator. is displayed,  
enter your PUK and select OK.  
2 Enter a new four-to-eight-digit PIN and select OK.  
3 Re-enter the new PIN to confirm and select OK.  
To turn the SIM card lock on  
1 From standby select Menu > Settings > General  
> Security > Locks > SIM protection > Protection  
and select On.  
2 Enter your PIN and select OK.  
To edit your PIN  
1 From standby select Menu > Settings > General  
> Security > Locks > SIM protection > Change PIN.  
2 Enter your PIN and select OK.  
3 Enter a new four-to-eight-digit PIN and select OK.  
4 Re-enter the new PIN and select OK.  
34  
This is the Internet version of the User's guide. © Print only for private use.  
   
Phone lock  
The phone lock protects the phone against unauthorized  
use. You can change the phone lock code (0000 by  
default) to any four-digit code.  
If the phone lock is set to Automatic, you only need  
to enter your phone lock code when you insert  
a different SIM card.  
To set the phone lock  
1 From standby select Menu > Settings > General  
> Security > Locks > Phone protection > Protection.  
2 Scroll to an option, enter your code and select OK.  
To edit your phone lock code  
1 From standby select Menu > Settings > General  
> Security > Locks > Phone protection > Change  
code.  
2 Enter the current code and select OK.  
3 Enter a new code and select OK.  
4 Re-enter the new code and select OK.  
If you forget your new code, you have to take  
your phone to your local Sony Ericsson retailer.  
To unlock the phone  
Enter your code and select OK.  
35  
This is the Internet version of the User's guide. © Print only for private use.  
 
Sony Ericsson Mobile Communications AB  
SE-221 88 Lund, Sweden  
EN/LZT 108 9511 R1A  
Printed in XXX  
This is the Internet version of the User's guide. © Print only for private use.  
Troubleshooting  
You can correct most problems yourself. For more  
support go to www.sonyericsson.com/support, see  
the Important information guide or contact your network  
operator.  
Remove the SIM card before handing your phone  
in for repair.  
The phone turns itself off  
Restart the phone or do a master reset.  
To restart the phone  
1 Turn the phone off and remove the battery cover.  
2 Remove the battery and put it back in place.  
3 Replace the battery cover and turn the phone on.  
To perform a master reset  
1 From standby select Menu > Settings > General  
> Master reset.  
2 Select Reset settings to delete your changes  
to settings or Reset all to delete your changes to  
settings, all contacts, messages, personal data, and  
content you have downloaded, received or edited.  
3 Select Continue.  
36  
This is the Internet version of the User's guide. © Print only for private use.  
I cannot turn the phone on  
Attach the charger (make sure the power icon on the  
charger is facing upwards) and charge the phone for  
3 hours.  
Some menu options appear in grey  
A service is not activated or your subscription does not  
support the function.  
Contact your network operator.  
The phone is working slowly  
Delete unwanted content and restart the phone.  
No indication of charging  
The battery is empty or has not been used for a long  
time. It may take up to 30 minutes before the battery  
icon appears on the screen.  
I cannot use Internet or send picture messages  
You need a phone subscription that supports data  
transmission, and the correct Internet settings.  
your network operator.  
37  
This is the Internet version of the User's guide. © Print only for private use.  
What do these error messages mean?  
Insert SIM  
Your SIM card is not inserted correctly or may be  
damaged or dirty. Try one or more of the following:  
Remove the SIM card and insert it correctly.  
Clean the connectors on the SIM card and phone  
with a soft brush, a cloth or a cotton bud.  
Check if the SIM card is damaged.  
Insert correct SIM card  
Check that you are using the correct operator  
SIM card. If not, contact your network operator.  
Wrong PIN  
You have entered your PIN code incorrectly.  
See SIM card lock on page 34.  
PIN blocked. To unblock, enter your PUK code  
provided by your network operator.  
The SIM card is blocked.  
Unblock. See SIM card lock on page 34.  
PUK blocked  
Contact your network operator.  
Phone locked  
The phone is locked.  
Unlock. See Phone lock on page 35.  
38  
This is the Internet version of the User's guide. © Print only for private use.  
Phone lock code:  
The phone lock code is required.  
Enter the correct code. See Phone lock on page 35.  
Codes do not match  
Appears when changing a security code.  
Confirm the new code by entering it twice.  
Emerg. calls only  
You are within range of a network but are only allowed  
to use it for emergency calls.  
Contact your network operator if the problem persists.  
No netw. coverage  
There is no network within range.  
Contact your network operator if the problem persists.  
39  
This is the Internet version of the User's guide. © Print only for private use.  
Declaration of Conformity  
We, Sony Ericsson Mobile Communications AB of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our product  
Sony Ericsson type AAB-1032042-BV  
and in combination with our accessories, to which this declaration relates  
is in conformity with the appropriate standards 3GPP TS 51.010-1,  
EN 301 489-7 and EN 60950, following the provisions of, Radio  
Equipment and Telecommunication Terminal Equipment directive  
99/5/EC with requirements covering EMC directive 89/336/EEC, and  
Low Voltage directive 73/23/EEC.  
Lund, June 2007  
Shoji Nemoto, Head of Product Business Group GSM/UMTS  
We fulfil the requirements of the R&TTE Directive (99/5/EC).  
40  
This is the Internet version of the User's guide. © Print only for private use.  
FCC Statement  
This device complies with Part 15 of the FCC rules. Operation is subject  
to the following two conditions:  
(1) This device may not cause harmful interference, and  
(2) This device must accept any interference received, including  
interference that may cause undesired operation.  
Sony Ericsson Z250a  
GSM 900/1800/1900  
This User guide is published by Sony Ericsson Mobile Communications  
AB or its local affiliated company, without any warranty. Improvements  
and changes to this User guide necessitated by typographical errors,  
inaccuracies of current information, or improvements to programs and/or  
equipment, may be made by Sony Ericsson Mobile Communications AB  
or its local affiliated company at any time and without notice. Such  
changes will, however, be incorporated into new editions of this User  
guide. All rights reserved.  
© Sony Ericsson Mobile Communications AB, 2007  
Publication number: EN/LZT 108 9511 R1A.  
Please note: Some of the services in this User guide are not supported  
by all networks. This also applies to the GSM International Emergency  
Number 112. Please contact your network operator or service provider  
if you are in doubt whether you can use a particular service or not.  
Please read the Guidelines for safe and efficient use and the Limited  
warranty chapters before you use your mobile phone. All illustrations  
are for illustration only and may not accurately depict the actual phone.  
The Predictive Text Technology is used under license from  
Zi Corporation.  
41  
This is the Internet version of the User's guide. © Print only for private use.  

Toshiba SD R2212 User Manual
Tascam PORTABLE CD GUITAR CD GT1 User Manual
Sony MSAC USM1 User Manual
Seagate Barracuda 9TN158 510 User Manual
Samsung Seek SPH M350 User Manual
Samsung GH68 07476A User Manual
Philips AJ3330 User Manual
Philips 26PW9100D User Manual
Pantech Cell Phone C520 User Manual
Panasonic Cell Phone KX TGA270S User Manual