Sony XDR C705DAB User Manual

3-218-336-12(1)  
Set the clock  
Scan tuning (for FM)  
Do the following if DAB broadcast is not available (depending on area). The time  
setting mode by DAB becomes invalid.  
The unit will automatically scan FM station.  
1 Press RADIO ON/OFFALARM RESET to turn on the radio.  
2 Press DAB/FM to select the FM band.  
3 Press UP(B)/DOWN(b)•TUNE/SELECT to choose the  
direction, and then press ENTERFM SCAN.  
UP(B): Scans to the higher frequency.  
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to  
select the “Set clock,” and then press ENTER.  
The hour indication will be displayed as follows.  
DAB/FM CLOCK  
ALARM1 ALARM2 ALARM3 ALARM4  
RADIO  
DOWN(b): Scans to the lower frequency.  
Scanning starts from the frequency being tuned in. When a station is  
received, scanning stops.  
AM  
PM  
or ENTER  
Operating Instructions  
4 If necessary, press UP(B)/DOWN(b)•TUNE/SELECT to tune  
Time  
PM08 :56  
in to the station more precisely.  
5 Adjust the volume using VOL +/.  
2 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and  
then press ENTER.  
3 Repeat step 2 to set the minute, year, month and day.  
After setting the time, the clock starts from 0 seconds.  
Setting the alarm  
Notes  
This unit allows you to set four alarm programmes (ALARM 1 - 4).  
The alarm time can be set for every programme and the alarm sound is selectable  
from radio or buzzer.  
• If you do not operate within 7 seconds while setting the clock, the clock setting  
mode will be cancelled.  
• Setup time for this operation is adjusted automatically when the customer  
operates the set while receiving DAB service.  
The alarm will come on at the same time everyday. Before setting the alarm,  
make sure to set the clock (See “Setting the Clock”.)  
Dream Machine is a trademark of Sony Corporation.  
To set the alarm time  
To change the clock display  
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to  
You can choose the clock display 12-hour system (default) and 24-hour system.  
select “Alarm settings,” and then press ENTER.  
XDR-C705DAB  
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to  
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired  
alarm (1 - 4) and then press ENTER.  
show the “Clock display” in the display, and then press ENTER.  
When the alarm is not set up, “Not in use” appears in the display.  
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired  
© 2007 Sony Corporation  
Printed in China  
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the alarm  
clock display, and then press ENTER.  
mode (DAB, FM and buzzer) and then press ENTER.  
“Set alarm” appears in the display.  
The clock display changes by turns (12-hour system:  
“AM 12:00” = midnight, 24-hour system: “0:00” = midnight.)  
If you select DAB or FM, “Set volume” appears in the display. In this case,  
repeat this step and adjust the volume.  
ALARM1 ALARM2 ALARM3 ALARM4  
4 Press UP(B)/DOWN(b)•TUNE/SELECT to select “ON,” and  
AM  
PM  
then press ENTER.  
The alarm time appears in the bottom of the display, and the arrow appears in  
both sides of the hour indicator.  
Clock Display  
12hour system  
BRIGHTNESS  
5 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and  
then press ENTER.  
DISPLAY MENU  
SLEEP  
ALARM  
VOL  
DAB/FM  
TUNE/SELECT  
DOWN UP  
FM SCAN  
ENTER  
ALARM RESET  
The arrow appears in both sides of the minute indicator.  
SNOOZE/  
SLEEP OFF  
RADIO  
PRESET  
VOL  
ON/OFF  
6 Repeat step 5 to set the minute and the alarm mode.  
The alarm mode as follows:  
Time adjustment about  
Summer time  
Weekdays: Every Monday to Friday  
Weekends: Every Saturday and Sunday  
Daily: Everyday from Sunday to Saturday  
Once: Once only  
This unit’s time adjustment will be done only when receiving DAB service.  
Receive DAB service for at least one minute to renew the time into Summer time.  
Wire antenna  
If you select “Once” repeat step 5 to set the year, month and day.  
7 Press ENTER.  
The setting is complete.  
Setting the brightness of the  
display  
Tip  
AC power  
cord  
You can set the alarm using ALARM button on the unit.  
Press ALARM and follow after steps 2.  
Press and hold DISPLAYBRIGHTNESS for few seconds to change the  
brightness. Repeat this step, to select high, middle or low for the display  
according to your preferences.  
Notes  
• The default alarm time for radio and buzzer is the current time of the clock.  
ALARM1 ALARM2 ALARM3 ALARM4  
• If you quit during the alarm setting, after about 7 seconds the previous display  
will return.  
• If a second alarm sounds during a first (or the snooze function is active), the  
second alarm takes priority.  
• If the alarm sounds at the same time (or the snooze function is active), the large  
alarm number takes priority.  
AM  
PM  
Improving the reception  
DAB Band-III/FM:  
Extend the wire antenna fully to increase reception sensitivity.  
• When Summer time begins, it is necessary to adjust the current time by  
manually (see “Time adjustment about Summer time” ).  
There is a tactile dot beside VOL +.  
Operating the radio  
To set the alarm on/off  
The unit can receive DAB services and FM stations.  
1 Follow steps 1 to 4 in “To set the alarm time.”  
“Set alarm” appears in the display.  
1 Press RADIO ON/OFFALARM RESET to turn on the radio.  
2 Press UP(B)/DOWN(b)•TUNE SELECT to set the alarm  
When the unit is turned on again, the last band you listened to is received.  
“ON” or “OFF,” and then press ENTER.  
ON: “ALARM (1-4)” appears in the display when the alarm setting is  
complete.  
2 Press DAB/FM repeatedly to select the desired band.  
Each press changes the band as follows:  
WARNING  
DAB  
FM  
OFF: “ALARM (1-4)” turn off from the display.  
To reduce the risk of fire or electric shock, do not expose this  
apparatus to rain or moisture.  
ALARM1 ALARM2 ALARM3 ALARM4  
3 Press the UP(B)/DOWN(b)•TUNE/SELECT to tune to the  
desired service or station.  
To avoid electrical shock, do not open the cabinet. Refer servicing to  
qualified personnel only.  
AM  
PM  
If you are selecting DAB, press ENTER.  
Do not install the appliance in a confined space, such as a bookcase or built-in  
cabinet.  
To reduce the risk of fire or electric shock, do not place objects filled with  
liquids, such as vases, on the apparatus.  
Connect the apparatus to an easily accessible AC outlet. Should you notice an  
abnormality in the apparatus, disconnect the main plug from the AC outlet  
immediately.  
Set Alarm  
OFF  
4 Adjust the volume using VOL +/.  
Note in FM usage  
The frequency step is set to 0.05 MHz on FM.  
3 Follow after step 5 in “To set the alarm time.”  
The setting is complete.  
Notes in DAB usage  
• If there are no services, you can choose only MANUAL mode.  
• “Station not available” appears when the ensemble for the selected service  
cannot be received.  
ALARM1 ALARM2 ALARM3 ALARM4  
Notice for the customer in the countries applying EU Directives  
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku,  
Tokyo, Japan. The Authorized Representative for EMC and product safety is  
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For  
any service or guarantee matters please refer to the addresses given in separate  
service or guarantee documents.  
AM  
PM  
21-07-2007  
About the SC (Secondary Component)  
If the selected primary component has a secondary component, “ii” appears in  
the display.  
To doze for a few more minutes  
SVC2  
SVC1  
Press SNOOZE/SLEEP OFF.  
Features  
The radio or buzzer turns off but will automatically come on again after about  
5 minutes. (while the snooze function is operating, “Snooze” flashes in the  
display.)  
• DAB(Band-III)/FM 2-band digital clock radio  
• Large clock display and 16 × 2 lines character dot display for text information  
• Brightness control  
Press UP(B)/DOWN(b)•TUNE/SELECT and ENTER to receive the desired  
secondary component. “II” appears while the secondary component is received.  
• 4 alarms with various alarm mode; weekdays, weekends, daily and once  
• 20 memory presets (10 DAB, 10 FM)  
• Current time and Summer time adjustment synchronized with DAB data  
• Sleep timer  
Note  
To stop the alarm  
When the selected secondary component is finished, the unit returns  
automatically to the primary component.  
Press RADIO ON/OFFALARM RESET to turn off the alarm.  
The alarm will come on again at the same time the next day.  
Presetting your favourite  
Setting the Sleep Timer  
Initial setting for the clock  
You can enjoy falling asleep to the radio using the built-in sleep timer that turns  
off the radio automatically after a preset duration.  
services or stations  
radio  
You can preset 10 services in DAB and 10 stations in FM.  
When the first time after purchase, do the following.  
1 Press SLEEP while the unit is turned on.  
Presetting services or stations  
“Sleep” appears in the display.  
1 Follow steps 1 to 3 in “Operating the radio” and manually tune in  
1 Plug in the unit.  
ALARM1 ALARM2 ALARM3 ALARM4  
to the broadcast you wish to preset.  
“Setting clock...” appears in the display, and DAB data adjust the clock as it  
is received. When finished, the current time appears in the display.  
AM  
PM  
2 Press PRESET.  
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the  
ALARM1 ALARM2 ALARM3 ALARM4  
Sleep  
60 minutes  
favourite number to preset, then press and hold PRESET.  
“saved” appears for 7 seconds in the display and the service or station is  
stored. (DAB services are stored with a service label.)  
AM  
PM  
2 Press SLEEP to set the sleep timer duration.  
Setting clock...  
Notes  
Each time you press SLEEP, the duration changes as follows:  
• To preset another service or station, repeat these steps.  
60  
45  
30  
15  
OFF  
• To change the preset service or station, tune in to the desired service or  
station and repeat steps 2 and 3. The new service or station will replace the  
previous service or station.  
• When the service or station is not registered, “Empty preset” appears in the  
display.  
2 Press RADIO ON/OFFALARM RESET to turn on the radio.  
The unit will automatically scan and create a list of receivable DAB  
broadcasts.  
The unit automatically turns off when the duration time is passed.  
Press ENTER or 7 seconds after you have finished setting the duration setting  
and released SLEEP, “activated” appears in the display and then the sleep timer  
starts. The unit will play for the duration you set, and then shut off.  
• If you do not operate within 7 seconds during the above steps, the current  
mode will be cancelled.  
ALARM1 ALARM2 ALARM3 ALARM4  
AM  
PM  
To change the Sleep Timer setting  
Tuning in to a preset service or station  
Repeat step 2 to select the desired sleep timer setting even after the sleep timer  
Sony DAB Radio  
has been activated.  
1 Press PRESET.  
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired  
To deactivate the Sleep Timer  
Notes  
preset station and then press ENTER.  
• Press SNOOZE/SLEEP OFF, the unit will turn off.  
• When the clock will not be set in 3 minutes, “AM 12:03 clock not set...”  
appears in the display (see “Setting the clock.”)  
• If no broadcasts are found by the DAB scan, “Station not available” appears  
in the display.  
• Press SLEEP to set the sleep timer “OFF,” only the sleep timer will be  
cancelled (the radio keeps ON).  
Notes  
• When the service or station is not registered, “Empty preset” appears in the  
display.  
• If you do not operate within 7 seconds during the above steps, the current  
mode will be cancelled.  
Continue to next page  

Sony Sheet Battery Pro VGPBPSE38 User Manual
Sony Mobile Xperia tipo 1264 0774 User Manual
Sony Ericsson Z530i User Manual
Simplicity 6 User Manual
Seagate MOMENTUS ST9250410AS User Manual
Samsung SCH 811 User Manual
Samsung GT I8700 User Manual
Samsung Computer Drive HX M640UAE User Manual
Samsung CD YEPP MCD MP67 User Manual
Philips SAC2530 User Manual