Sony ICFCS10IPBLK User Manual

Notes  
WARNING  
4-150-697-13(2)  
Compatible iPod/iPhone  
models  
Owners Record  
e model number and the serial number are located on the  
bottom.  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
Do not attempt to charge the battery.  
Replace the battery for the clock backup with a  
Features  
Connecting the  
antenna  
If you are not going to use the remote  
commander for a long time, remove the battery  
to avoid any damage that may be caused by  
leakage and corrosion.  
Sony CR2032 lithium battery, and the battery  
for the remote commander with a Sony CR2025  
lithium battery. Use of another battery may  
present a risk of fire or explosion.  
Clock Radio compatible with iPod®/iPhone®  
Wake or Sleep to iPod/Radio/Buzzer  
Easy to set A-B alarm  
Compatible iPod/iPhone models are as follows.  
Update your iPod/iPhone to use the latest software  
before you use it.  
To connect the AM loop  
antenna  
2-5-7day alarm  
Battery may explode if mistreated. Do not  
recharge, disassemble or dispose of in fire.  
Dispose of used battery promptly. Keep away  
from children.  
Model No. ICF-CS10iP  
LCD Brightness control  
MEGA BASS  
Serial No.________________________________  
The shape and the length of the antenna is  
designed to receive AM signals. Do not dismantle  
or roll up the antenna.  
MEGA Xpand  
About the backup  
battery  
Wireless Remote Commander  
No Power No Problem alarm system to keep  
the clock and the alarm operating during a  
power interruption with a CR2032 battery  
installed  
For customers who purchased this product in the  
USA  
Important Safety  
Instructions  
1 Remove only the loop part from the  
plastic stand.  
2 Set up the AM loop antenna.  
Please register this product on line at  
Proper registration will enable us to send you  
periodic mailings about new products, services,  
and other important announcements. Registering  
your product will also allow us to contact you  
in the unlikely event that the product needs  
adjustment or modification. ank you.  
To keep accurate time, this unit contains a  
CR2032 battery as a backup power source.  
The battery keeps the clock and the alarm  
operating in the event of a power interruption.  
iPhone 4  
iPhone 3GS  
iPhone 3G  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
Specifications  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL HARMONIC  
DISTORTION:  
With 6 ohm loads both channels driven, from  
150 Hz -10,000 Hz; rated 3 watts per channel  
minimum RMS power, with no more than 10 %  
total harmonic distortion.  
4) Follow all instructions.  
To know when to replace the  
battery  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
FM/AM  
Clock Radio  
When the battery becomes weak, “” appears in  
the display.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturers  
instructions.  
WARNING  
To reduce the risk of fire or electric shock, do  
not expose this apparatus to rain or  
moisture.  
To reduce the risk of fire, do not cover the  
ventilation of the apparatus with newspapers,  
tablecloths, curtains, etc. And do not place lighted  
candles on the apparatus.  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to dripping or splashing,  
and do not place objects filled with liquids, such  
as vases, on the apparatus.  
iPhone  
iPod touch  
3rd generation  
iPod touch  
2nd generation  
If a power interruption occurs while the battery is  
weak, the current time and alarm will be erased.  
Replace the battery with a Sony CR2032 lithium  
battery. Use of another battery may cause a fire or  
explosion.  
8) Do not install near any heat sources such as  
radiators, heat registers, stoves, or other  
apparatus (including amplifiers) that produce  
heat.  
3 Insert the AM antenna terminal into the  
AM ANTENNA jack on the rear of the  
unit.  
Time display  
12-hour system  
9) Do not defeat the safety purpose of the  
polarized or grounding-type plug. A polarized  
plug has two blades with one wider than the  
other. A grounding type plug has two blades  
and a third grounding prong. The wide blade  
or the third prong are provided for your safety.  
If the provided plug does not fit into your  
outlet, consult an electrician for replacement  
of the obsolete outlet.  
10)Protect the power cord from being walked on  
or pinched particularly at plugs, convenience  
receptacles, and the point where they exit  
from the apparatus.  
11)Only use attachments/accessories specified by  
the manufacturer.  
Note  
If AM 12:00” flashes in the display when the unit  
is connected to an AC outlet for the first time, the  
battery may be weak. In this case, consult your  
Sony dealer.  
Section for iPod  
DC out: 5V  
MAX: 500mA  
Radio section  
Frequency range  
iPod nano  
5th generation  
(video camera)  
iPod nano  
4th generation  
(video)  
Operating Instructions  
ICF-CS10iP  
iPod touch  
1st generation  
To replace the battery  
Do not install the appliance in a confined space,  
such as a bookcase or built-in cabinet.  
Band Frequency  
Channel step  
87.5 MHz – 108 MHz 0.1 MHz  
530 kHz – 1 710 kHz 10 kHz  
1 Keep the AC plug connected to the AC  
outlet, remove the screw that secures the  
battery compartment lid at the bottom of  
the unit using a screwdriver, and open  
the lid (see Fig. ).  
2 Insert a new battery in the battery  
compartment with the side facing up  
(see Fig. ).  
3 Close the battery compartment lid and  
secure it with the screw (see Fig. ).  
4 Press iPod & iPhone , RADIO  
BAND, AUDIO IN or SNOOZE/DATE/  
SLEEP OFF to turn “” off in the  
display.  
FM  
AM  
Do not expose the batteries (battery pack or  
batteries installed) to excessive heat such as  
sunshine, fire or the like for a long time.  
iPod nano  
3rd generation  
(video)  
Dream Machine is a trademark of Sony Corporation.  
iPod nano  
2nd generation  
(aluminum)  
iPod nano  
1st generation  
General  
Speaker  
As the main plug is used to disconnect the unit  
from the mains, connect the unit to an easily  
accessible AC outlet. Should you notice an  
abnormality in the unit, disconnect the main plug  
from the AC outlet immediately.  
To remove the AM loop  
antenna  
Approx. 5.7 cm (2 1/4 inches) dia. 6 Ω  
12)Use only with the cart, stand, tripod, bracket,  
or table specified by the manufacturer, or sold  
with the apparatus. When a cart is used, use  
caution when moving the cart/apparatus  
combination to avoid injury from tip-over.  
Input  
AUDIO IN jack (ø 3.5 mm stereo minijack)  
Pull the AM antenna terminal while pushing up  
the terminal clamp.  
Power output  
3.5 W + 3.5 W (at 10% harmonic distortion)  
The unit is not disconnected from the AC power  
source (mains) as long as it is connected to the  
wall outlet, even if the unit itself has been turned  
off.  
Power requirements  
iPod  
5th generation  
(video)  
iPod  
4th generation  
(color display)  
iPod classic  
120 V AC, 60 Hz  
For clock back up: 3V DC, CR2032 battery (1)  
No Power No Problem is a trademark of Sony Corporation.  
The nameplate and important information  
concerning safety are located on the bottom  
exterior.  
Dimensions  
Approx. 290.5 mm × 152.0 mm × 139.5 mm (w/h/d)  
©2009 Sony Corporation  
Printed in China  
13)Unplug this apparatus during lightning storms  
or when unused for long periods of time.  
14)Refer all servicing to qualified service  
personnel. Servicing is required when the  
apparatus has been damaged in any way, such  
as power-supply cord or plug is damaged,  
liquid has been spilled or objects have fallen  
into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate  
normally, or has been dropped.  
For the state of california, USA only  
Perchlorate Material –special handling may apply, see  
Perchlorate Material: Lithium battery contains  
perchlorate  
(11 3/8 inches × 5 15 16 inches × 5 1/2 inches)  
/
including projecting parts and controls  
Note  
You are cautioned that any changes or  
modifications not expressly approved in this  
manual could void your authority to operate this  
equipment.  
Mass  
When you replace the battery, do not disconnect  
the plug from the AC outlet. Otherwise, the  
calendar, current time, alarm and station presets  
will be erased.  
Approx. 1.94 kg (4 lb 4 oz) including power  
iPod mini  
supply unit  
Adjusting the AM loop antenna  
Find a place and an orientation that provide good  
reception.  
iPod  
4th generation  
Supplied accessories  
Remote commander (1)  
CAUTION  
Danger of explosion if battery is incorrectly  
replaced. Replace only with the same type.  
Notes  
Do not place the AM loop antenna near the  
unit or other AV equipment, as noise may  
result.  
AM loop antenna (1)  
In these Operating Instructions, “iPod” is used  
as a general reference to iPod functions on an  
iPod or iPhone, unless otherwise specified by  
the text or illustrations.  
The connector of the unit is for sole use with an  
iPod. If you use devices that do not match with  
the connector, connect to the AUDIO IN jack of  
this unit with the supplied audio connecting  
cable.  
Sony cannot accept responsibility in the event  
that data recorded to an iPod is lost or damaged  
when using an iPod connected to this unit.  
Audio connecting cable (1)  
Universal Dock Adapter for iPhone (1)  
Universal Dock Adapter for iPhone 3G & iPhone  
3GS (1)  
Tip  
Adjust the direction of the AM loop antenna for  
best AM broadcast sound.  
Universal Dock Adapter for iPhone 4 (1)  
Design and specifications are subject to change  
without notice.  
is symbol is intended to alert the user  
to the presence of uninsulated “dangerous  
voltage” within the product’s enclosure that  
may be of sufficient magnitude to constitute  
a risk of electric shock to persons.  
Preparing the remote  
commander  
Precautions  
Play the unit on the power source specified in  
“Specifications.”  
is symbol is intended to alert the user to  
the presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
Before using the card remote commander for the  
first time, remove the insulation film.  
Reset button  
Since a strong magnet is used for the speaker,  
keep personal credit cards using magnetic coding  
or spring-wound watches away from the unit to  
prevent possible damage from the magnet.  
Do not leave the unit in a location near a heat  
source such as a radiator or airduct, or in a  
place subject to direct sunlight, excessive dust,  
mechanical vibration, or shock.  
Troubleshooting  
Should any problem persist after you have made  
the following checks, consult your nearest Sony  
dealer.  
NOTE  
CR2032  
This equipment has been tested and found to  
comply with the limits for a Class B digital device,  
pursuant to Part 15 of the FCC Rules. These limits  
are designed to provide reasonable protection  
against harmful interference in a residential  
installation. This equipment generates, uses and  
can radiate radio frequency energy and, if not  
installed and used in accordance with the  
The clock flashes “AM 12:00” due to a power  
interruption.  
To know when to replace the  
battery  
Allow adequate air circulation to prevent internal  
heat build-up. Do not place the unit on a surface  
(a rug, a blanket, etc.) or near materials (a  
curtain) which might block the ventilation holes.  
Should any solid object or liquid fall into the unit,  
unplug the unit and have it checked by qualified  
personnel before operating it any further.  
To clean the casing, use a soft cloth dampened  
with a mild detergent solution.  
Never touch the wire of the external FM  
antenna during a thunderstorm. Furthermore,  
immediately disconnect the AC power cord  
from the radio.  
The battery is low. Replace the battery. Remove  
the old battery and install a new one.  
With normal use, the battery (CR2025) should  
last for about six months. When the remote  
commander no longer operates the unit, replace  
the battery with a new one.  
The radio, iPod or buzzer alarm does not  
sound at the preset alarm time.  
Check that alarm A” or alarm “B” is properly  
displayed.  
instructions, may cause harmful interference to  
radio communications. However, there is no  
guarantee that interference will not occur in a  
particular installation. If this equipment does  
cause harmful interference to radio or television  
reception, which can be determined by turning  
the equipment off and on, the user is encouraged  
to try to correct the interference by one or more  
The radio or alarm of iPod is activated but no  
sound comes on at the preset alarm time.  
Check the alarm volume setting.  
There is no sound from the iPod.  
Make sure the iPod is securely connected.  
Adjust the VOLUME.  
of the following measures:  
— Reorient or relocate the receiving  
antenna.  
NOTES ON LITHIUM BATTERY  
The iPod cannot be operated with this unit.  
Make sure the iPod is securely connected.  
CR2025  
Wipe the battery with a dry cloth to assure a  
good contact.  
— Increase the separation between the equipment  
and receiver.  
The iPod cannot be charged.  
Make sure the iPod is securely connected.  
Be sure to observe the correct polarity when  
installing the battery.  
— Connect the equipment into an outlet on a circuit  
different from that to which the receiver is  
connected.  
If the time in the display is  
incorrect after the battery is  
changed (Reset)  
Do not hold the battery with metallic tweezers,  
otherwise a short-circuit may occur.  
When Daylight Saving Time (summer time)  
begins, the clock does not employ the  
Daylight Saving Time automatically.  
— Consult the dealer or an experienced radio/TV  
technician for help.  
If you have any questions or problems concerning  
your unit, please consult your nearest Sony dealer.  
Press the reset button with a pointed device. The  
reset button is in the small hole located in the  
battery compartment (see Fig. ).  
Make sure the clock is set correctly.  
Press and hold CLOCK and SNOOZE/DATE/  
SLEEP OFF simultaneously for at least  
2 seconds to activate the Automatic DST  
function.  
This unit includes a preinstalled Sony Lithium battery (CR2032) as back-up power source for the clock, which is preset  
to EST (Eastern Standard Time) at the factory. And this battery is considered part of the product.  

Toshiba MK4006GAH User Manual
Sony MDX F5800 User Manual
Seagate Backup Plus STBU500100 User Manual
Samsung SGH X496 User Manual
Samsung SGH T208 User Manual
RCA CD Player LAD890RC User Manual
Pioneer DEH P2600 User Manual
Oregon Scientific STARCK PS M03 User Manual
Oregon Scientific NR868 User Manual
Onkyo C 707CHX User Manual