Sony Ericsson W910I User Manual

Contents  
Sony Ericsson W910i  
Contents  
This is the Internet version of the User's guide. © Print only for private use.  
1
Bluetooth™ is a trademark or registered trademark  
of Bluetooth SIG Inc.  
The marble logo, SensMe, PlayNow, MusicDJ,  
PhotoDJ, TrackID and VideoDJ are trademarks or  
registered trademarks of Sony Ericsson Mobile  
Communications AB.  
TrackID™ is powered by Gracenote Mobile  
MusicID™. Gracenote and Gracenote Mobile  
MusicID are trademarks or registered trademarks  
of Gracenote, Inc.  
Sony, WALKMAN and the WALKMAN logo,  
Memory Stick Micro™ and M2™ are trademarks  
of Sony Corporation.  
Sony Ericsson W910i  
UMTS 2100 GSM 900/1800/1900  
This User guide is published by Sony Ericsson  
Mobile Communications AB or its local affiliated  
company, without any warranty. Improvements and  
changes to this User guide necessitated by  
typographical errors, inaccuracies of current  
information, or improvements to programs and/or  
equipment, may be made by Sony Ericsson Mobile  
Communications AB at any time and without  
notice. Such changes will, however, be  
incorporated into new editions of this User guide.  
All rights reserved.  
Ericsson is a trademark or registered trademark of  
Telefonaktiebolaget LM Ericsson.  
Adobe Photoshop Album Starter Edition is either  
a trademark or registered trademark of Adobe  
Systems Incorporated in the United States and/or  
other countries.  
©Sony Ericsson Mobile Communications AB, 2007  
Publication number: 1201-5542.2  
Please note:  
Some of the services in this User guide are not  
supported by all networks. This also applies to the  
GSM International Emergency Number 112.  
Microsoft, Windows, Outlook, Exchange Server and  
Vista are either registered trademarks or trademarks  
of Microsoft Corporation in the United States and/  
or other countries.  
Please contact your network operator or service  
provider if you are in doubt whether you can use  
a particular service or not.  
Please read the Guidelines for safe and efficient use  
and the Limited warranty chapters before you use  
your mobile phone.  
T9™ Text Input is a trademark or a registered  
trademark of Tegic Communications. T9™ Text  
Input is licensed under one or more of the  
following: U.S. Pat. Nos. 5,818,437, 5,953,541,  
5,187,480, 5,945,928, and 6,011,554; Canadian  
Pat. No. 1,331,057, United Kingdom Pat. No.  
2238414B; Hong Kong Standard Pat. No.  
HK0940329; Republic of Singapore Pat. No. 51383;  
Euro.Pat. No. 0 842 463(96927260.8) DE/DK, FI,  
FR, IT, NL, PT, ES, SE, GB; and additional patents  
are pending worldwide.  
Java and all Java based trademarks and logos  
are trademarks or registered trademarks of Sun  
Microsystems, Inc. in the U.S. and other countries.  
End-user license agreement for Sun™ Java™  
J2ME™.  
Your mobile phone has the capability to download,  
store and forward additional content, e.g. ringtones.  
The use of such content may be restricted or  
prohibited by rights of third parties, including but  
not limited to restriction under applicable copyright  
laws. You, and not Sony Ericsson, are entirely  
responsible for additional content that you download  
to or forward from your mobile phone. Prior to your  
use of any additional content, please verify that your  
intended use is properly licensed or is otherwise  
authorized. Sony Ericsson does not guarantee the  
accuracy, integrity or quality of any additional  
content or any other third party content. Under no  
circumstances will Sony Ericsson be liable in any  
way for your improper use of additional content or  
other third party content.  
3
This is the Internet version of the User's guide. © Print only for private use.  
Restrictions: Software is confidential copyrighted  
information of Sun and title to all copies is retained  
by Sun and/or its licensors. Customer shall not  
modify, decompile, disassemble, decrypt, extract,  
or otherwise reverse engineer Software. Software  
may not be leased, assigned, or sublicensed, in  
whole or in part.  
Instruction symbols  
These symbols appear in the User  
guide.  
Note  
Export Regulations: Software, including technical  
data, is subject to U.S. export control laws,  
Tip  
including the U.S. Export Administration Act and  
its associated regulations, and may be subject to  
export or import regulations in other countries.  
Customer agrees to comply strictly with all such  
regulations and acknowledges that it has the  
responsibility to obtain licenses to export, re-  
export, or import Software. Software may not be  
downloaded, or otherwise exported or re-exported  
(i) into, or to a national or resident of, Cuba, Iraq,  
Iran, North Korea, Libya, Sudan, Syria (as such  
listing may be revised from time to time) or any  
country to which the U.S. has embargoed goods;  
or (ii) to anyone on the U.S. Treasury Department's  
list of Specially Designated Nations or the U.S.  
Commerce Department's Table of Denial Orders.  
Warning  
A service or function is network-  
or subscription-dependent.  
Contact your network operator  
for details.  
>
Use a selection or navigation  
key to scroll and select. See  
Restricted Rights: Use, duplication or disclosure  
by the United States government is subject to the  
restrictions as set forth in the Rights in Technical  
Data and Computer Software Clauses in DFARS  
252.227-7013(c) (1) (ii) and FAR 52.227-19(c) (2) as  
applicable.  
Other product and company names mentioned  
herein may be the trademarks of their respective  
owners.  
Any rights not expressly granted herein are  
reserved.  
All illustrations are for illustration only and may not  
accurately depict the actual phone.  
4
This is the Internet version of the User's guide. © Print only for private use.  
Getting started  
To insert the battery  
Assembly  
Before you start using your phone,  
you need to insert a SIM card and the  
battery.  
To insert the SIM card  
1 Insert the battery with the label side  
down and the connectors facing each  
other.  
2 Slide the battery cover into place and  
lock it.  
Turning on the phone  
To turn on the phone  
1 Unlock the battery cover.  
2 Remove the battery cover.  
3 Slide the SIM card into its holder with  
the golden contacts facing down.  
1 Press and hold down  
.
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
5
           
2 Select a mode:  
for example, 112 or 911. You can see  
and call an emergency number without  
entering a PIN.  
Normal mode – full functionality.  
Flight mode – limited functionality.  
3 Enter your SIM card PIN, if requested  
and select OK.  
4 Select a language.  
5 Select Cont. > Yes to use the setup  
wizard while settings are downloaded.  
If you enter the wrong PIN three times in  
a row, the SIM card is blocked. See SIM  
card lock on page 63.  
Flight mode  
In Flight mode the network and radio  
transceivers are turned off to prevent  
disturbance to sensitive equipment.  
If you want to correct a mistake when  
you enter your PIN, press  
.
SIM card  
You can use the Bluetooth™ function in  
Flight mode.  
The SIM (Subscriber Identity Module)  
card, which you get from your network  
operator, contains information about  
your subscription. Always turn off your  
phone and detach the charger before  
you insert or remove the SIM card.  
Startup screen  
The startup screen appears when you  
turn your phone on. See Using pictures  
on page 38.  
You can save contacts on the SIM card  
before you remove it from your phone.  
See To copy names and numbers to the  
SIM card on page 19.  
Standby  
After you have turned your phone on  
and entered your PIN, the name of the  
network operator appears. This view is  
called standby.  
PIN  
You may need a PIN (Personal  
Identification Number) to activate the  
services in your phone. Your PIN is  
supplied by your network operator.  
Each PIN digit appears as *, unless it  
starts with emergency number digits,  
Help in your phone  
Help and information are available  
in your phone. See Navigation on  
6
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
         
To use the setup wizard  
1 From standby select Menu > Settings  
> the General tab > Setup wizard.  
2 Select an option.  
To charge the battery  
2.5 h.  
To view information about functions  
Scroll to a function and select Info, if  
available. In some cases, Info appears  
under Options.  
To view the phone demonstration  
From standby select Menu >  
Entertainment > Demo tour.  
To view status information  
From standby press the volume key  
up.  
1 Connect the charger to the phone. It  
takes approximately 2.5 hours to fully  
charge the battery. Press a key to view  
the screen.  
Charging the battery  
The phone battery is partly charged  
when you buy it.  
2 Remove the charger by tilting the plug  
upwards.  
You can use your phone while it is  
charging. You can charge the battery  
at any time and for more or less than  
2.5 hours. You can interrupt the charging  
without damaging the battery.  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
7
   
Phone overview  
1
2
8
9
1
Ear speaker  
Gaming key A  
Screen  
2
3
4
5
6
7
Selection keys  
Call key  
3
Activity menu key  
Navigation key, Walkman®  
player control  
10  
11  
8
9
Video call camera  
Gaming key B  
4
5
6
7
10 Volume, digital zoom keys  
11 Memory card slot  
12 End key  
12  
13  
13 C key (Clear)  
14 Camera key  
14  
15  
15 Silent key  
8
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
   
16  
17  
20  
16 Walkman® key  
17 Strap hole  
18  
19  
18 Video recording indicator  
19 Camera lens  
20 On/off key  
21  
21 Connector for charger,  
handsfree and USB cable  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
9
Menu overview  
PlayNow™*  
Internet*  
Entertainment  
Online services*  
Games  
TrackID™  
VideoDJ™  
PhotoDJ™  
MusicDJ™  
Remote control  
Record sound  
Demo tour  
Camera  
Messaging  
Media  
Write new  
Inbox  
Email  
Web feeds  
Drafts  
Outbox  
Sent messages  
Saved messages  
My friends*  
Call voicemail  
Templates  
Manage messages  
Settings  
Radio  
Contacts  
WALKMAN  
Myself  
New contact  
10  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
   
Calls**  
Organizer  
File manager**  
Alarms  
All  
Answered  
Dialled  
Missed  
Applications  
Video call  
Calendar  
Tasks  
Notes  
Synchronization  
Timer  
Stopwatch  
Calculator  
Code memo  
Settings**  
General  
Profiles  
Sounds & alerts  
Ring volume  
Ringtone  
Silent mode  
Increasing ring  
Vibrating alert  
Message alert  
Key sound  
Display  
Wallpaper  
Themes  
Startup screen  
Screen saver  
Clock size  
Brightness  
Edit line names*  
Calls  
Speed dial  
Connectivity*  
Bluetooth  
USB  
Phone name  
Network sharing  
Synchronization  
Device management  
Mobile networks  
Time & date  
Language  
Update service  
Voice control  
New events  
Shortcuts  
Smart search  
Divert calls  
Switch to line 2*  
Manage calls  
Video share*  
Time & cost*  
Flight mode  
Security  
Setup wizard  
Accessibility*  
Phone status  
Master reset  
Show/hide my no. Internet settings  
Handsfree  
Streaming settings  
Message settings*  
Accessories  
Open to answer  
* Some menus are operator-, network- and subscription-dependent.  
** You can use the navigation key to scroll between tabs in submenus. For more information, see Navigation on  
page 12.  
Getting started  
11  
This is the Internet version of the User's guide. © Print only for private use.  
To select actions on the screen  
Select an action shown at the bottom  
of the screen by pressing the left or  
right selection key, or the centre  
navigation key.  
Navigation  
The main menus are shown as icons.  
Some submenus include tabs.  
To navigate the phone menus  
Selection keys  
1 From standby select Menu.  
2 Use the navigation key to move up,  
down, left and right through the  
menus.  
Centre navigation key  
To view options for an item  
Select Options to, for example, edit.  
To scroll between the tabs  
Scroll to a tab by pressing the  
navigation key left or right.  
To return to standby  
Press  
.
12  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
         
To end a function  
Activity menu  
Press  
.
The activity menu gives you quick  
access to certain functions.  
To navigate your media  
1 From standby select Media.  
2 Use the navigation key to move  
through the menus.  
To open the activity menu  
Press  
.
Activity menu tabs  
3 Select from the list.  
New events – missed calls and new  
messages.  
To delete items  
Running apps – applications that are  
running in the background.  
My shortcuts – add your favourite  
functions to access them quickly.  
Internet – quick access to the  
Internet.  
Press  
to delete items such as  
numbers, letters, pictures and sounds.  
Shortcuts  
You can use keypad shortcuts to go  
directly to a menu. Menu numbering  
starts from the top left icon and moves  
across and then down row by row.  
File manager  
You can use the file manager to handle  
files saved in the phone memory or on  
a memory card.  
To go directly to a main menu  
From standby select Menu and press  
,
,
or  
.
You may have to purchase a memory  
card separately.  
To use navigation key shortcuts  
From standby press or  
go directly to a function.  
,
,
to  
Memory card  
Your phone supports Memory Stick  
Micro™ (M2™) memory card adding  
more storage space to your phone.  
It can also be used as a portable  
memory card with other compatible  
devices.  
To edit a navigation key shortcut  
1 From standby select Menu > Settings  
> the General tab > Shortcuts.  
2 Scroll to an option and select Edit.  
3 Scroll to a menu option and select  
Shortc.  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
13  
         
To insert a memory card  
Handling files  
You can move and copy files between  
your phone, a computer and a memory  
card. Files are saved on the memory  
card first and then in the phone  
memory. Unrecognized files are saved  
in the Other folder.  
You can create subfolders to move  
or copy files to. You can select more  
than one or all the files in a folder at  
the same time for all folders except  
Games and Applications.  
Open the cover and insert the memory  
card with the golden contacts facing  
down.  
If the memory is full, delete some  
content to create space.  
To remove a memory card  
File manager tabs  
The file manager is divided into three  
tabs, and icons indicate where the  
files are saved.  
All files – all content in the phone  
memory and on a memory card  
In phone – all content in the phone  
memory  
Open the cover and press the edge  
of the memory card to release and  
remove it.  
On memory card – all content on  
a memory card  
To view information about files  
1 From standby select Menu > Organizer  
> File manager.  
2 Find a file and select Options  
> Information.  
To view memory card options  
1 From standby select Menu > Organizer  
> File manager > the On memory card  
tab.  
2 Select Options.  
14  
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
To move a file in the file manager  
1 From standby select Menu > Organizer  
> File manager.  
2 Find a file and select Options  
> Manage file > Move.  
Entering text  
You can use multitap text input or  
T9™ Text Input  
T9 Text Input method uses a built-in  
dictionary.  
to enter text. The  
3 Select an option.  
To change text input method  
To select more than one file in a  
folder  
1 From standby select Menu > Organizer  
> File manager.  
2 Scroll to a folder and select Open.  
3 Select Options > Mark > Mark several.  
4 For each file you want to mark, scroll  
to the file and select Mark.  
When you enter text, press and hold  
down  
.
To shift between capitals and lower-  
case letters  
When you enter text, press  
.
To enter numbers  
When you enter text, press and hold  
down  
.
To delete a file from the file manager  
1 From standby select Menu > Organizer  
> File manager.  
To enter full stops and commas  
When you enter text, press  
.
2 Find the file and press  
.
To enter text using T9™ Text Input  
1 From standby select, for example,  
Menu > Messaging > Write new > Text  
message.  
Phone language  
You can select a language to use in  
your phone.  
2 If  
down  
is not displayed, press and hold  
to change to T9 Text Input.  
To change the phone language  
1 From standby select Menu > Settings  
> the General tab > Language > Phone  
language.  
3 Press each key only once, even if the  
letter you want is not the first letter on  
the key. For example, to write the word  
2 Select an option.  
“Jane”, press  
Write the whole word before looking at  
the suggestions.  
,
,
,
.
Getting started  
This is the Internet version of the User's guide. © Print only for private use.  
15  
         
4 Use  
5 Press  
or  
to view suggestions.  
to accept a suggestion.  
Calling  
Making and receiving calls  
To enter text using multitap  
1 From standby select, for example,  
Menu > Messaging > Write new > Text  
message.  
You need to turn on your phone and  
be within range of a network.  
To make a call  
2 If  
down  
input.  
3 Press  
is displayed, press and hold  
1 From standby enter a phone number  
(with international country code and  
area code, if applicable).  
to change to multitap text  
repeatedly until the  
2 Press  
.
desired letter appears.  
4 When a word is written, press  
add a space.  
See Video call on page 18.  
to  
You can call numbers from your contacts  
and call list. See Contacts on page 18,  
and Call list on page 21. You can also  
use your voice to make calls. See Voice  
To add words to the built-in  
dictionary  
1 When you enter text using T9 Text  
Input, select Options > Spell word.  
2 Write the word using multitap input  
and select Insert.  
To end a call  
Press  
.
To make international calls  
1 From standby press  
sign appears.  
until a “+”  
2 Enter the country code, area code  
(without the first zero) and phone  
number.  
3 Press  
.
16  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
         
To re-dial a number  
To view missed calls from standby  
When Retry? appears select Yes.  
Press  
and scroll to the New  
events tab and select a number.  
Do not hold your phone to your ear when  
waiting. When the call connects, your  
phone gives a loud signal.  
Press  
to open the call list.  
Networks  
Your phone switches automatically  
between GSM and 3G (UMTS)  
networks depending on availability.  
Some network operators allow you to  
switch networks manually.  
To answer a call  
Open your phone.  
You can turn Open to answer on or off.  
To switch networks manually  
1 From standby select Menu > Settings  
> the Connectivity tab > Mobile  
networks > GSM/3G networks.  
2 Select an option.  
To reject a call  
Press  
.
To change the ear speaker volume  
during a call  
Press the volume key up or down.  
Emergency calls  
To mute the microphone during a call  
Your phone supports international  
emergency numbers, for example, 112  
and 911. These numbers can normally  
be used to make emergency calls in  
any country, with or without the SIM  
card inserted, if a 3G (UMTS) or GSM  
network is within range.  
1 Press and hold down  
2 Press and hold down  
resume.  
.
again to  
To turn the loudspeaker on during  
a call  
Select SpkrOn.  
In some countries, other emergency  
numbers may also be promoted. Your  
network operator may therefore have  
saved additional local emergency  
numbers on the SIM card.  
Do not hold your phone to your ear when  
using the loudspeaker. This could  
damage your hearing.  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
17  
         
To make an emergency call  
From standby enter 112 (the  
international emergency number) and  
Contacts  
You can save names, phone numbers  
and personal information in Contacts.  
Information can be saved in the phone  
memory or on the SIM card.  
press  
.
To view your local emergency  
numbers  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Special numbers >  
Emergency nos.  
Default contact  
You can choose which contact  
information is shown as default. If  
Phone contacts is selected as default,  
your contacts show all the information  
saved in Contacts. If you select SIM  
contacts as default, your contacts  
show names and numbers saved on  
the SIM card.  
Video call  
See a person on the screen during  
calls. Both parties need a subscription  
that supports the 3G (UMTS) service,  
and you need to be within range of a  
3G (UMTS) network. 3G (UMTS)  
To select default contacts  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Default contacts.  
3 Select an option.  
service is available when  
appears.  
To make a video call  
1 From standby enter a phone number  
(with international country code and  
area code if applicable).  
Phone contacts  
Phone contacts can contain names,  
phone numbers and personal  
information. They are saved in the  
phone memory.  
2 Select Options > Make video call.  
To use the zoom with an outgoing  
video call  
Press  
or  
.
To add a phone contact  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select Add.  
3 Enter the name and select OK.  
4 Enter the number and select OK.  
To view video call options  
During the call, select Options.  
18  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
         
5 Select a number option.  
6 Scroll between tabs and select the  
fields to add information.  
7 Select Save.  
Editing contacts  
To add information to a phone  
contact  
1 From standby select Menu > Contacts.  
2 Scroll to a contact and select Options  
> Edit contact.  
3 Scroll between the tabs and select Add.  
4 Select an option and an item to add.  
5 Select Save.  
Calling contacts  
To call a phone contact  
1 From standby select Menu > Contacts.  
2 Scroll to a contact and press  
.
To go directly to a contact, from standby  
If your subscription supports Calling Line  
Identification (CLI) service, you can  
assign personal ringtones to contacts.  
press and hold down  
.
To call a SIM contact from phone  
contacts  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > SIM contacts.  
To copy names and numbers to the  
SIM card  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Copy to SIM.  
3 Select an option.  
3 Scroll to a contact and press  
.
To call with Smart search  
1 From standby press  
enter a contact name or a phone  
to  
To automatically save names and  
phone numbers on the SIM card  
number. All entries which match the  
sequence of digits or letters are shown  
in a list.  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Auto save on  
SIM.  
2 Scroll to a contact or a phone number  
and press  
.
3 Select an option.  
To turn Smart search on or off  
1 From standby select Menu > Settings  
> the Calls tab > Smart search.  
2 Select an option.  
To save contacts on a memory card  
1 From standby select Menu > Contacts.  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
19  
   
2 Scroll to New contact and select  
Options > Advanced > Back up to m.  
card.  
Deleting contacts  
To delete a contact  
1 From standby select Menu > Contacts.  
SIM contacts  
2 Scroll to a contact and press  
.
SIM contacts can contain names and  
numbers only. They are saved on the  
SIM card.  
To delete all phone contacts  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Delete all  
contacts.  
To add a SIM contact  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select Add.  
3 Enter the name and select OK.  
4 Enter the number and select OK.  
5 Select a number option and add more  
information, if available.  
Sending contacts  
To send a contact  
1 From standby select Menu > Contacts.  
2 Scroll to a contact and select Options  
> Send contact.  
6 Select Save.  
3 Select a transfer method.  
When you copy all contacts from your  
phone to the SIM card, all existing SIM  
card information is replaced.  
Make sure the receiving device supports  
the transfer method you select.  
To call a SIM contact  
1 From standby select Menu > Contacts.  
Sorting contacts  
To select the sort order for contacts  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Sort order.  
3 Select an option.  
2 Scroll to a contact and press  
.
To copy names and numbers to  
phone contacts  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Copy from SIM.  
3 Select an option.  
Memory status  
The number of contacts you can  
save in your phone or on the SIM  
card depends on available memory.  
20  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
   
To view memory status  
4 Select a transfer method.  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Advanced > Memory status.  
Make sure the receiving device supports  
the transfer method you select.  
Groups  
Synchronizing contacts  
You can create a group of phone  
numbers and email addresses from  
Phone contacts to send messages to.  
also use groups (with phone numbers)  
when you create accepted callers  
Contacts can be synchronized with  
a Microsoft® Exchange Server®  
(Microsoft® Outlook®). For more  
information see Synchronizing on  
Myself  
You can enter information about  
yourself and, for example, send your  
business card.  
To create a group of numbers and  
email addresses  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Groups.  
3 Scroll to New group and select Add.  
4 Enter a name for the group and select  
Cont.  
5 Scroll to New and select Add.  
6 For each contact phone number or  
email address you want to mark, scroll  
to it and select Mark.  
To add your own business card  
1 From standby select Menu > Contacts.  
2 Scroll to Myself and select Open.  
3 Scroll to Add > Create new.  
4 Scroll between tabs and select the  
fields to add information.  
5 Enter the information and select Save.  
To enter a symbol select Options > Add  
symbol > Insert.  
7 Select Cont. > Done.  
To send your business card  
1 From standby select Menu > Contacts.  
2 Scroll to Myself and select Open.  
3 Scroll to My contact info and select  
Send.  
Call list  
You can view information about recent  
calls.  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
21  
         
To call a number from the call list  
4 Select a contact.  
1 From standby press  
a tab.  
and scroll to  
To speed dial  
From standby enter the position  
2 Scroll to a name or a number and  
press  
number and press  
.
.
Voicemail  
To add a call list number to contacts  
1 From standby press  
tab.  
and scroll to a  
If your subscription includes an  
answering service, callers can leave a  
voicemail message when you cannot  
answer a call.  
2 Scroll to the number and select Save.  
3 Select New contact to create a new  
contact or select an existing contact  
to add the number to.  
To enter your voicemail number  
1 From standby select Menu > Messaging  
> Settings > Voicemail number.  
To clear the call list  
2 Enter the number and select OK.  
1 From standby press  
.
2 Scroll to the All tab and select Options  
> Delete all.  
To call your voicemail service  
From standby press and hold down  
.
Speed dial  
Voice control  
By creating voice commands you can:  
Speed dialling lets you select nine  
contacts that you can dial quickly.  
The contacts can be saved in  
positions 1-9.  
Voice dial – call someone by saying  
their name  
Activate voice dialling by saying a  
To add contacts to speed dial  
numbers  
“magic word”  
Answer and reject calls when you  
use a handsfree  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Speed dial.  
3 Find a position number and select  
Add.  
22  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
             
To record a voice command using  
voice dialling  
1 From standby select Menu > Settings  
> the General tab > Voice control >  
Voice dialling > Activate.  
2 Select Yes > New voice command and  
select a contact. If the contact has  
more than one number, select the  
number to add the voice command to.  
3 Record a voice command such as  
“John mobile”.  
4 Follow the instructions that appear. Wait  
for the tone and say the command to  
record. The voice command is played  
back to you.  
Voice dialling  
You can hear your recorded contact  
name when you receive a call from  
that contact.  
To voice dial  
1 From standby press and hold down a  
volume key.  
2 Wait for the tone and say a recorded  
name, for example “John mobile”. The  
name is played back to you and the  
call is connected.  
To make a call with a handsfree  
From standby press the handsfree key.  
5 If the recording sounds OK, select Yes. If  
not, select No and repeat steps 3 and 4.  
The magic word  
You can record and use a voice  
command as a magic word to activate  
voice dialling without pressing any  
keys. Your handsfree must be  
connected to your phone when using  
the magic word.  
Voice commands are saved in the phone  
memory only. They cannot be used in  
another phone.  
To re-record a voice command  
1 From standby select Menu > Settings  
> the General tab > Voice control >  
Voice dialling > Edit names.  
2 Scroll to a command and select Options  
> Replace voice.  
You should choose a long, unusual word  
or phrase that can easily be  
distinguished from ordinary background  
speech. Bluetooth handsfree does not  
support this feature.  
3 Wait for the tone and say the  
command.  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
23  
 
To activate and record the magic  
word  
1 From standby select Menu > Settings  
> the General tab > Voice control >  
Magic word > Activate.  
2 Follow the instructions that appear and  
select Cont. Wait for the tone and say  
“Answer”, or another word.  
3 Select Yes to accept or No for a new  
recording.  
2 Follow the instructions that appear and  
select Cont. Wait for the tone and say  
the magic word.  
4 Follow the instructions that appear and  
select Cont. Wait for the tone and say  
“Busy”, or another word.  
3 Select Yes to accept or No for a new  
recording.  
5 Select Yes to accept or No for a new  
recording.  
4 Follow the instructions that appear and  
select Cont.  
6 Follow the instructions that appear and  
select Cont.  
5 Select where your magic word is to be  
activated.  
7 Select where your voice answering is  
to be activated.  
To make a call using the magic word  
To answer a call using voice  
commands  
Say “Answer”.  
1 In standby make sure  
2 Say the magic word.  
is visible.  
3 Wait for the tone and say a voice  
command.  
To reject a call using voice  
commands  
Say “Busy”.  
Voice answering  
When you use a handsfree, you can  
answer or reject incoming calls with  
your voice.  
Diverting calls  
You can divert calls, for example, to  
an answering service.  
To activate voice answering and  
record voice answer commands  
1 From standby select Menu > Settings  
> the General tab > Voice control >  
Voice answer > Activate.  
When Restrict calls is used, some divert  
call options are not available. See  
24  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
     
To divert calls  
To end an ongoing call and answer  
a second call  
1 From standby select Menu > Settings  
> the Calls tab > Divert calls.  
2 Select a call type and a divert option.  
3 Select Activate.  
4 Enter the number to divert calls to and  
select OK.  
During the call, select Replace active  
call.  
Handling two voice calls  
You can have calls ongoing and on  
hold at the same time.  
To switch between two calls  
More than one call  
During the call, press  
.
Call waiting  
When call waiting is used, you hear  
a beep if you receive a second call.  
To join two calls  
During the call, select Options > Join  
calls.  
To activate call waiting  
From standby select Menu > Settings  
> the Calls tab > Manage calls > Call  
waiting > Activate.  
To connect two calls  
During the call, select Options > Transfer  
call. You are disconnected from both  
calls.  
To make a second call  
1 During the call, select Options > Hold.  
This puts the ongoing call on hold.  
2 Enter the number to call and select  
Options > Add call.  
To end an ongoing call and return to  
the call on hold  
First press  
and then  
.
Conference calls  
To answer a second call  
With a conference call, you can have a  
joint conversation with up to five people.  
During the call, press  
. This puts  
the ongoing call on hold.  
To add a new participant  
To reject a second call  
During the call, press  
with the ongoing call.  
1 During the call, select Options > Hold.  
This puts the joined calls on hold.  
2 Select Options > Add call.  
and continue  
3 Enter the number to call and press  
.
Calling  
25  
This is the Internet version of the User's guide. © Print only for private use.  
       
4 Select Options > Join calls to add the  
new participant.  
5 Repeat this task to add more  
participants.  
To add numbers to the accepted  
callers list  
1 From standby select Menu > Settings  
> the Calls tab > Manage calls > Accept  
calls > Only from list.  
2 Scroll to New and select Add.  
3 Select a contact or Groups.  
To release a participant  
1 Select Options > Release part.  
2 Select the participant to release.  
See Groups on page 21.  
To have a private conversation  
1 During the call, select Options > Talk to  
and select the participant to talk to.  
2 To resume the conference call, select  
Options > Join calls.  
To accept all calls  
From standby select Menu > Settings  
> the Calls tab > Manage calls > Accept  
calls > All callers.  
My numbers  
Restricted dialling  
You can restrict outgoing and  
incoming calls. A password from your  
service provider is required.  
You can view, add and edit your own  
phone numbers.  
To check your phone numbers  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Special numbers > My  
numbers.  
If you divert incoming calls, you cannot  
use some restrict calls options.  
Restrict calls options  
Standard options are:  
3 Select an option.  
All outgoing – all outgoing calls  
Outgoing intl – all outgoing  
international calls  
Outgoing intl roam. – all outgoing  
international calls except to your  
home country  
Accept calls  
You can choose to receive calls from  
certain phone numbers only.  
All incoming – all incoming calls  
26  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
         
Inc. when roaming – all incoming  
2 Scroll to New contact and select  
Options > Special numbers > Fixed  
dialling  
> Activate.  
3 Enter your PIN2 and select OK.  
4 Select OK again to confirm.  
calls when you are abroad  
To restrict calls  
1 From standby select Menu > Settings  
> the Calls tab > Manage calls >  
Restrict calls.  
2 Select an option.  
To save a fixed number  
3 Select Activate.  
4 Enter your password and select OK.  
1 From standby select Menu > Contacts.  
2 Scroll to New contact and select  
Options > Special numbers > Fixed  
dialling > Fixed numbers > New  
number.  
Fixed dialling  
Fixed dialling allows calls to be made  
only to certain numbers saved on the  
SIM card. The fixed numbers are  
protected by your PIN2.  
3 Enter the information and select Save.  
Call time and cost  
During a call, the duration of the call is  
shown. You can check the duration of  
your last call, outgoing calls and the  
total time of your calls.  
Partial numbers can be saved. For  
example, saving 0123456 allows calls  
to be made to all numbers starting  
with 0123456.  
To check the call time  
From standby select Menu > Settings  
> the Calls tab > Time & cost > Call  
timers.  
When fixed dialling is used, you cannot  
view or manage any phone numbers  
saved on the SIM card but you can still  
call the international emergency number,  
112.  
Showing or hiding your phone  
number  
You can select to show or hide your  
phone number when you make a call.  
To use fixed dialling  
1 From standby select Menu > Contacts.  
Calling  
This is the Internet version of the User's guide. © Print only for private use.  
27  
           
To hide your phone number  
1 From standby select Menu > Settings  
> the Calls tab > Show/hide my no.  
2 Select Hide number.  
Messaging  
Receiving and saving messages  
You are notified when you receive a  
message. Messages are automatically  
saved in the phone memory. When the  
phone memory is full, you can delete  
messages or save them on a memory  
card or on the SIM card.  
Open to answer  
You can set the phone to answer calls  
when you open the phone.  
To turn Open to answer on  
1 From standby select Menu > Settings  
> the Calls tab > Open to answer.  
2 Select On.  
To save a message on a memory  
card  
From standby select Menu > Messaging  
> Settings > General > Save to >  
Memory card.  
To save a message on the SIM card  
1 From standby select Menu > Messaging  
and select a folder.  
2 Scroll to a message and select  
Options > Save message.  
To view a message from the inbox  
1 From standby select Menu > Messaging  
> Inbox.  
2 Scroll to the message and select View.  
To delete a message  
1 From standby select Menu > Messaging  
and select a folder.  
2 Scroll to the message and press  
.
28  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
   
Text messages  
Text messages can contain simple  
pictures, sound effects, animations,  
and melodies.  
If you send a text message to a group,  
you will be charged for each member.  
See Groups on page 21.  
To copy and paste text in a text  
message  
1 When you write the message, select  
Options > Copy & paste.  
2 Select Copy all or Mark & copy. Scroll  
to and mark text in the message.  
3 Select Options > Copy & paste > Paste.  
Before you use messaging  
You must have a service centre  
number. The number is supplied by  
your service provider and is usually  
saved on the SIM card. If the number  
to your service centre is not saved on  
your SIM card, you must enter the  
number yourself.  
To add an item to a text message  
1 When you write the message, select  
Options > Add item.  
To enter a service centre number  
1 From standby select Menu > Messaging  
> Settings > Text message and scroll to  
Service centre. The number is shown if  
it is saved on the SIM card.  
2 If there is no number shown, select Edit.  
3 Scroll to New ServiceCentre and select  
Add.  
2 Select an option and then an item.  
To convert a text message to a  
picture message  
1 When you write the message, select  
Options > To picture msg.  
2 Continue creating a picture message.  
4 Enter the number, including the  
international “+” sign and country code.  
5 Select Save.  
To call a number in a text message  
When you view the message, scroll to  
the phone number and press  
.
To write and send a text message  
1 From standby select Menu > Messaging  
> Write new > Text message.  
2 Write the message and select Cont.  
> Contacts look-up.  
To turn long messages on  
1 From standby select Menu > Messaging  
> Settings > Text message.  
2 Select Max. msg length > Max.  
available.  
3 Select a recipient and select Send.  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
29  
     
To create and send a picture  
message  
1 From standby select Menu > Messaging  
> Write new > Picture msg.  
Picture messages  
Picture messages can contain text,  
pictures, slides, sound recordings,  
video clips, signatures and  
attachments. You can send picture  
messages to a mobile phone or an  
email address.  
2 Enter text. To add items to the message,  
press , scroll  
and select an item.  
3 Select Cont. > Contacts look-up.  
4 Select a recipient and select Send.  
Before you use picture messaging  
You must set an Internet profile and the  
address of your message server. If no  
Internet profile or message server exists,  
you can receive all the settings auto-  
matically from your network operator  
Receiving picture messages  
You can select how to download your  
picture messages. Standard options  
when you download picture messages  
are:  
Always – automatic download.  
Ask in roaming – ask to download  
when not in home network.  
Not in roaming – do not download  
when not in home network.  
Always ask – ask to download.  
Off – new messages appear in the  
Inbox.  
To select an MMS profile  
1 From standby select Menu > Messaging  
> Settings > Picture message > MMS  
profile.  
2 Select a profile.  
To set the message server address  
1 From standby select Menu > Messaging  
> Settings > Picture message.  
2 Scroll to MMS profile and select Edit.  
3 Select Options > Edit.  
To set automatic download  
1 From standby select Menu > Messaging  
> Settings > Picture message > Auto  
download.  
4 Scroll to Message server and select  
Edit.  
2 Select an option.  
5 Enter the address and select OK  
> Save.  
30  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
   
To save an item in a picture message  
When you view a picture message  
select Options > Save items and select  
an item.  
To add a text message template  
1 From standby select Menu > Messaging  
> Templates > New template > Text.  
2 Insert text or select Options to add  
items. Select OK.  
Message options  
3 Enter a title and select OK.  
You can set standard options for all  
messages or choose specific settings  
each time you send a message.  
To use a picture message template  
1 From standby select Menu > Messaging  
> Templates.  
To set text message options  
1 From standby select Menu > Messaging  
> Settings > Text message.  
2 Scroll to a template and select Use.  
3 When the message is ready, select  
Cont. > Contacts look-up.  
2 Scroll to an option and select Edit.  
4 Select a recipient and select Send.  
To set picture message options  
1 From standby select Menu > Messaging  
> Settings > Picture message.  
To add a picture message template  
1 From standby select Menu > Messaging  
> Templates > New template > Picture  
msg.  
2 Scroll to an option and select Edit.  
2 Enter text. To add items to the message,  
To set message options for a specific  
message  
1 When the message is ready and a  
recipient is selected, select Options  
> Advanced.  
press , scroll  
and select an item.  
3 Select Save, enter a title and select  
OK.  
To save a message as a template  
1 From standby select Menu > Messaging  
> Inbox.  
2 Scroll to the message and select  
Options > Save as template.  
2 Scroll to an option and select Edit.  
Templates  
If you often use the same phrases and  
pictures in a message, you can save  
the message as a template.  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
31  
       
If you enter settings manually, you can  
contact your email provider for more  
information. An email provider could be  
the company that supplied your email  
address.  
Voice messages  
You can send and receive a sound  
recording as a voice message.  
The sender and recipient must have a  
subscription supporting picture  
messaging.  
To write and send an email message  
1 From standby select Menu > Messaging  
> Email > Write new.  
2 Select Add > Enter email address. Enter  
the email address and select OK.  
3 To enter more recipients, select Edit.  
Scroll to an option and select Add  
> Enter email address. Enter the email  
address and select OK. When you are  
ready, select Done.  
4 Scroll to Subject:. Select Edit and enter  
a subject. Select OK.  
5 Scroll to Text:. Select Edit and enter  
the text. Select OK.  
To record and send a voice message  
1 From standby select Menu > Messaging  
> Write new > Voice message.  
2 Record the message and select Stop  
> Send > Contacts look-up.  
3 Select a recipient and select Send.  
Email  
You can use standard email functions  
and your computer email address in  
your phone.  
Before you use email  
6 Scroll to Attachments:. Select Add and  
select a file to attach.  
7 Select Cont. > Send.  
You can use the setup wizard to  
check if settings are available for your  
email account or you can enter them  
manually. You can also receive the  
settings at  
To receive and read an email  
message  
1 From standby select Menu > Messaging  
> Email > Inbox > Options > Send&rec.  
2 Scroll to the message and select View.  
To create an email account  
1 From standby select Menu > Messaging  
> Email > Accounts.  
2 Scroll to New account and select Add.  
32  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
     
To save an email message  
1 From standby select Menu > Messaging  
> Email > Inbox.  
Active email account  
If you have several email accounts,  
you can change which one is active.  
2 Scroll to the message and select  
Options > Save message.  
To change the active email account  
1 From standby select Menu > Messaging  
> Email > Accounts.  
To reply to an email message  
1 From standby select Menu > Messaging  
> Email > Inbox.  
2 Scroll to the message and select  
Options > Reply.  
3 Write the reply and select OK.  
4 Select Continue > Send.  
2 Select an account.  
To delete an email (POP3)  
1 From standby select Menu > Messaging  
> Email > Inbox.  
2 Scroll to the message and select  
Options > Mark for deletion.  
To view an attachment in an email  
message  
Marked emails will be deleted when you  
next connect to your server.  
When you view the message, select  
Options > Attachments > View.  
To delete an email (IMAP4)  
1 From standby select Menu > Messaging  
> Email > Inbox.  
2 Scroll to the message and select  
Options > Mark for deletion.  
To save an attachment in an email  
message  
When you view the message, select  
Options > Attachments > View > Save.  
3 Select Options > Clear inbox.  
Synchronizing email  
Marked email messages will be deleted  
in the phone and on the server.  
Email can be synchronized with  
a Microsoft Exchange Server  
(Microsoft® Outlook®). For more  
information see Synchronizing on  
Push email  
You can receive notification in your  
phone from your email server that you  
have new email messages.  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
33  
 
To turn on push email notification  
From standby select Menu > Messaging  
> Email > Settings > Push email.  
To add a chat contact  
1 From standby select Menu >  
Messaging > My friends > the Contacts  
tab.  
My friends  
2 Select Options > Add contact.  
You can connect and log in to the My  
friends server to communicate online  
with chat messages.  
To send a chat message  
1 From standby select Menu >  
Messaging > My friends > the Contacts  
tab.  
Before you use My friends  
If no settings exist in your phone, you  
need to enter server settings. Your  
service provider can provide standard  
settings information such as:  
2 Scroll to a contact and select Chat.  
3 Write the message and select Send.  
Status  
You can show your status, for example,  
Happy or Busy, to your contacts only.  
You can also show your status to all  
users on the My friends server.  
Username  
Password  
Server address  
Internet profile  
To show my status  
To enter My friends server settings  
1 From standby select Menu > Messaging  
> My friends > Configure.  
1 From standby select Menu >  
Messaging > My friends > Options >  
Settings > Show my status.  
2 Select an option.  
2 Scroll to a setting and select Add.  
To log in to the My friends server  
From standby select Menu >  
Messaging > My friends > Log in.  
To update your own status  
1 From standby select Menu >  
Messaging > My friends > the My  
Status tab.  
To log out of the My friends server  
Select Options > Log out.  
2 Edit the information.  
34  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
   
Chat group  
To save a conversation  
1 From standby select Menu >  
Messaging > My friends > the  
Conversations tab.  
2 Scroll to a conversation and select  
Options > Advanced > Save  
conversation.  
A chat group can be started by your  
service provider, by an individual My  
friends user or by yourself. You can  
save chat groups by saving a chat  
invitation or by searching for a specific  
chat group.  
To create a chat group  
1 From standby select Menu >  
Messaging > My friends > the Chat  
groups tab.  
To view a saved conversation  
1 From standby select Menu >  
Messaging > My friends > the  
Conversations tab.  
2 Select Options > Add chat group > New  
chat group.  
2 Select Options > Saved conv.  
3 Select who to invite from your contacts  
list and select Cont.  
4 Enter a short invitation text and select  
Cont. > Send.  
Area and cell information  
Area and cell information are text  
messages, for example, local traffic  
reports that are sent to subscribers  
within a certain network area.  
To add a chat group  
1 From standby select Menu >  
Messaging > My friends > the Chat  
groups tab  
> Options > Add chat group.  
2 Select an option.  
To turn area information on  
1 From standby select Menu >  
Messaging > Settings > Area info.  
2 Scroll to Reception and select Edit > On.  
Conversation history is saved between  
log out and when you log in again to  
let you return to chat messages from  
previous conversations.  
Messaging  
This is the Internet version of the User's guide. © Print only for private use.  
35  
   
To take a picture  
1 Activate the camera and use the  
Imaging  
navigation key to scroll to  
.
Camera and video recorder  
You can take pictures and record  
video clips to view, save or send.  
2 Press  
to take a picture.  
3 The picture is automatically  
saved on the memory card.  
Do not record with a strong light source  
in the background. Use a support or the  
self-timer to avoid a blurred picture.  
1
2
3
4
Key A  
Key B  
Zoom in or out  
Take pictures/Record video  
To record a video clip  
1 Activate the camera and use the  
navigation key to scroll to  
2 Press fully down to start  
recording.  
.
4
3
To stop recording  
1 Press  
.
2 The video clip is automatically saved  
on the memory card.  
2
To use zoom  
Press the volume key up or down.  
1
To adjust brightness  
Press  
or  
.
To view pictures and video clips  
1 Activate the camera and use the  
Using the camera  
navigation key to scroll to  
2 Scroll to the item.  
.
To activate the camera  
From standby press and hold down  
3 To view a video clip, press the  
centre navigation key.  
.
36  
Imaging  
This is the Internet version of the User's guide. © Print only for private use.  
         
You can view, enhance and organize  
your pictures and video clips on your  
computer by installing the Adobe™  
Photoshop™ Album Starter Edition or  
the Sony Ericsson Media Manager.  
These are included on the CD that  
comes with your phone and are  
available for download at  
Camera icons and settings  
Icons on the screen inform what the  
current setting is. More camera  
settings are available in Settings.  
To change settings  
Activate the camera and select  
.
To view information about settings  
Scroll to a setting and select  
.
Picture blog  
A picture blog is a personal Web page.  
If your subscription supports this  
service, you can send pictures to a  
blog.  
Camera shortcuts  
Key  
Shortcut  
Key A  
Key B  
Night mode  
Web services may require a separate  
license agreement between you and the  
service provider. Additional regulations  
and charges may apply. Contact your  
service provider.  
Camera: Shoot mode  
Video: Video size  
Camera key guide  
Transferring pictures  
To send camera pictures to a blog  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
3 Select Options > Send > To blog.  
4 Add title and text.  
Transfer to and from your computer  
You can use Bluetooth™ wireless  
technology and the USB cable to  
transfer pictures and video clips  
between your computer and phone.  
on page 53 for more information.  
5 Select OK > Publish.  
Imaging  
This is the Internet version of the User's guide. © Print only for private use.  
37  
         
To go to a blog address from  
contacts  
1 From standby select Menu > Contacts.  
2 Scroll to a contact and select a Web  
address.  
4 Select an option.  
5 Connect the USB cable to the phone.  
6 Connect the USB cable to the printer.  
7 Wait for feedback in the phone and  
select OK.  
8 Enter printer settings, if required and  
select Print.  
3 Select Go to.  
To send a picture or video clip  
1 From standby select Media.  
2 Scroll to an item and select Options  
> Send.  
You should disconnect and re-connect  
the USB cable if there is a printer error.  
Pictures  
You can view, add, edit or delete  
pictures in Media.  
3 Select a transfer method.  
Make sure the receiving device supports  
the transfer method you select.  
Using pictures  
To receive a picture or video clip  
Follow the instructions that appear.  
You can add a picture to a contact,  
use it during phone startup, as a  
wallpaper in standby or as a screen  
saver.  
Camera printing  
You can print camera pictures using  
the USB cable connected to a  
compatible printer.  
To use pictures  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture. Select  
View.  
You can also print using a Bluetooth  
compatible printer.  
3 Select Options > Use as.  
4 Select an option.  
To print camera pictures using the  
USB cable  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
3 Select Options > Print.  
38  
Imaging  
This is the Internet version of the User's guide. © Print only for private use.  
         
To view pictures in a slide show  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
Select View.  
3 Select Options > Slide show.  
4 Select a mood.  
PhotoDJ™ and VideoDJ™  
You can edit pictures and video clips.  
To edit and save a picture  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
Select View.  
3 Select Options > Edit in PhotoDJ™.  
4 Edit the picture.  
Photo tags  
You can tag pictures to categorise them.  
5 Select Options > Save.  
To tag pictures  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
Select View.  
To edit and save a video clip  
1 From standby select Menu > Organizer  
> File manager > Videos.  
2 Scroll to a video clip and select  
Options > VideoDJ™.  
3 Edit the video clip.  
4 Select Options > Save.  
3 Press  
and scroll to a tag.  
4 Press the centre navigation key.  
5 For each picture you want to tag, use  
or  
to scroll to the picture and  
To trim a video clip  
press the centre navigation key.  
1 From standby select Menu > Organizer  
> File manager > Videos.  
2 Scroll to a video clip and select  
Options > VideoDJ™ > Edit > Trim.  
3 Select Set to set the starting point and  
select Start.  
4 Select Set to set the ending point and  
select End.  
5 Select Trim > Options > Save.  
To create a new photo tag  
1 From standby select Media and scroll  
to Photo > Camera album.  
2 Scroll to a month and a picture.  
Select View.  
3 Press  
and select Options > New tag.  
4 Enter a name and select OK.  
5 Select an icon.  
6 Press the centre navigation key option  
to tag the picture.  
Imaging  
This is the Internet version of the User's guide. © Print only for private use.  
39  
     
Themes  
Entertainment  
To navigate your media see Navigation  
on page 12.  
You can change the appearance of the  
screen through items such as colours  
and wallpaper. You can also create  
new themes and download them.  
For more information, go to  
Stereo portable handsfree  
To set a theme  
1 From standby select Menu > Organizer  
> File manager.  
2 Scroll to Themes and Open.  
3 Scroll to a theme and select Set.  
To use the handsfree  
Connect the portable handsfree.  
Music stops when you receive a call  
and resumes when the call has ended.  
40  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
         
To switch track  
Walkman® player  
To play music  
1 From standby select Media and scroll  
to Music.  
2 Scroll to a title and select Play.  
To stop playing music  
Press the centre navigation key.  
To resume playing music  
From standby press  
and press  
.
To fast forward and rewind  
When you listen to music, press and  
1 When you listen to music, press and  
hold down  
or  
.
hold  
.
To move between tracks  
When you listen to music, press  
or  
.
Shake control  
You can shake the phone to switch  
track or shuffle the playlist.  
2 Tilt your phone right to go to the next  
track or left to go to the previous track.  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
41  
   
To shuffle tracks  
Music and video controls  
1 When you listen to music, press and  
To change the volume  
Press the volume keys up or down.  
hold  
.
2 Shake your phone to shuffle tracks in  
the playlist.  
To return to the player menus  
Select Back.  
Video player  
To return to the players  
Select Options > Resume.  
To play videos  
1 From standby select Media and scroll  
to Video.  
To exit the player menus  
Press and hold down  
.
2 Scroll to a title and select Play.  
Browsing files  
To stop playing videos  
Music and video files are saved and  
categorized.  
Press the centre navigation key.  
To resume playing videos  
Press the centre navigation key.  
Artists – list tracks you have  
transferred using Media Manager.  
Albums – list tracks by album in your  
phone and on a memory card.  
To send music  
1 From standby select Media and scroll  
to Music.  
2 Scroll to a title and select Options  
> Send.  
3 Select a transfer method.  
Tracks – list all music tracks in your  
phone and on a memory card.  
Audio books – list audio books you  
have transferred from your computer.  
Podcasts – list all podcasts you have  
transferred from your computer.  
Playlists – create own lists of tracks.  
Make sure the receiving device supports  
the transfer method you select.  
To receive music  
Follow the instructions that appear.  
42  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
     
SensMe™ – list all tracks available by  
mood.  
To create a playlist by mood  
Genre – list music genres.  
Year – list tracks in your phone and on  
a memory card by year.  
Fast  
Video – list all video clips in your  
phone or on a memory card.  
Playlists  
Sad  
Happy  
You can create playlists to organize  
files. You can sort the files by artist or  
title. Files can be added to more than  
one playlist.  
Slow  
Deleting a playlist, or a file from a  
playlist, does not delete the file from the  
memory, just the reference to the file.  
To create a playlist  
1 From standby select Media and scroll  
to Music > Playlists.  
2 Scroll to New playlist and select Add.  
3 Enter a name and select OK.  
4 Scroll to a track and select Mark.  
5 Select Add to add the track to the  
playlist.  
1 From standby select Media.  
2 Scroll to Music > SensMe™ and select  
Open.  
3 Use the navigation key to preview  
different tracks.  
4 Select Add to choose an area of tracks.  
5 Select Create to view the playlist in the  
Walkman® player.  
6 Select Options > Save playlist.  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
43  
   
To add files to a playlist  
1 From standby select Media and scroll  
to Music > Playlists.  
computer or that you have purchased  
to the phone memory or a memory  
card.  
2 Select a playlist.  
3 Select Add music.  
4 Scroll to a track and select Mark.  
5 Select Add to add the track to the  
playlist.  
Sony Ericsson Media Manager software  
is also available for download at  
Before you use Media Manager  
You need one of these operating  
systems to use Media Manager on  
your computer:  
To remove tracks from a playlist  
1 From standby select Media and scroll  
to Music > Playlists.  
2 Select a playlist.  
3 Scroll to the track and press  
Windows® Vista® (32 bit and 64 bit  
versions of: Ultimate, Enterprise,  
Business, Home Premium, Home  
Basic)  
.
To delete a playlist  
1 From standby select Media and scroll  
Windows® XP (Pro or Home)  
to Music > Playlists.  
2 Scroll to a playlist and press  
To install Media Manager  
.
1 Turn on your computer and insert the  
CD. The CD starts automatically and  
the installation window opens.  
2 Select a language and click OK.  
3 Click Install Sony Ericsson Media  
Manager and follow the instructions.  
To view information about a track  
Scroll to a track and select Options  
> Information.  
Transferring music from  
a computer  
With Sony Ericsson Media Manager,  
included on the CD with your phone,  
you can transfer music from CDs, your  
To use Media Manager  
1 Connect the phone to a computer with  
the USB cable that came with the  
phone.  
2 Computer: Start/Programs/  
Sony Ericsson/Media Manager.  
44  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
       
3 Phone: Select Mass storage. The  
phone will shut down in this mode but  
will restart again when it is  
To stream music and video clips  
1 From standby select Menu > Internet.  
2 Select Options > Go to > Bookmarks.  
3 Select a link to stream from.  
disconnected from the USB cable.  
Do not remove the USB cable from your  
phone or computer during transfer, as  
this may corrupt the memory card or the  
phone memory.  
TrackID™  
TrackID™ is a free music recognition  
service. Search for song titles, artists  
and album names.  
4 For safe disconnection of the USB cable  
in mass storage mode, right-click the  
removable disk icon in Windows  
Explorer and select Eject. See Using  
To search for song information  
When you hear a song through a  
loudspeaker, from standby select  
Menu > Entertainment > TrackID™.  
When the radio is playing select  
Options > TrackID™.  
For details on transferring music, refer  
to Media Manager Help. Click  
the top right corner of the Media  
Manager window.  
in  
Radio  
Online music and video clips  
Do not use your phone as a radio in  
places where this is prohibited.  
You can view video clips and listen to  
music by streaming them to your phone  
from the Internet. If settings are not  
already in your phone, see Settings on  
page 50. For more information,  
contact your network operator or go  
To listen to the radio  
1 Connect the handsfree to the phone.  
2 From standby select Menu > Radio.  
To change the volume  
When the radio is playing, press the  
To select a data account for  
streaming  
volume keys up or down.  
1 From standby select Menu > Settings  
> the Connectivity tab > Streaming  
settings.  
To automatically search for channels  
When the radio is playing, select  
Search.  
2 Select the data account to use.  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
45  
   
To manually search for channels  
PlayNow™  
You can listen to music before you  
purchase and download it to your  
phone.  
When the radio is playing, press  
or  
.
To switch between preset channels  
When the radio is playing, press  
This service is not available in all  
countries. In some countries you can  
purchase music from some of the  
world’s top musical artists.  
or  
.
Saving channels  
You can save up to 20 preset channels.  
Before you use PlayNow™  
You must have the required settings in  
your phone. See Settings on page 50.  
To save channels  
When you have found a radio channel  
select Options > Save.  
To listen to PlayNow™ music  
1 From standby select Menu  
> PlayNow™.  
To select saved channels  
1 From standby select Menu > Radio  
> Options > Channels.  
2 Select music from a list.  
2 Select a radio channel.  
Downloading from PlayNow™  
To save channels in positions 1 to 10  
The price appears when you select to  
download and save a music file. Your  
phone bill or prepay card is debited  
when a purchase is accepted.  
When you have found a radio channel,  
press and hold down  
.
To select channels saved in positions  
1 to 10  
To download a music file  
When you have listened to a music file  
preview, you can agree to accept the  
conditions.  
When the radio is playing, press  
.
1 Select Yes to download.  
2 A text message is sent to confirm  
payment and the file is made available  
to download.  
46  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
   
Ringtones and melodies  
To set a ringtone  
Make sure the receiving device supports  
the transfer method you select.  
1 From standby select Menu > Settings  
> the Sounds & alerts tab > Ringtone.  
2 Find and select a ringtone.  
To receive a ringtone  
Follow the instructions that appear.  
You are not allowed to exchange  
some copyright-protected material.  
A protected file has a  
To set the ringtone volume  
1 From standby select Menu > Settings  
> the Sounds & alerts tab > Ring  
volume.  
icon.  
MusicDJ™  
2 Press  
or  
to change the volume.  
You can compose and edit your own  
melodies to use as ringtones. A melody  
consists of four types of tracks – Drums,  
Basses, Chords, and Accents. A track  
contains a number of music blocks.  
The blocks consist of pre-arranged  
sounds with different characteristics.  
The blocks are grouped into Intro, Verse,  
Chorus, and Break. You compose a  
melody by adding music blocks to the  
tracks.  
3 Select Save.  
To turn the ringtone off  
From standby press and hold down  
.
All signals except the alarm signal are  
affected.  
To set the vibrating alert  
1 From standby select Menu > Settings  
> the Sounds & alerts tab > Vibrating  
alert.  
To compose a melody  
1 From standby select Menu  
> Entertainment > MusicDJ™.  
2 Select to Insert, Copy or Paste blocks.  
2 Select an option.  
To send a ringtone  
1 From standby select Menu > Organizer  
> File manager.  
3 Use  
,
,
or  
to scroll between  
the blocks.  
2 Scroll to Music and select Open.  
3 Scroll to a ringtone and select Options  
> Send.  
4 Select Options > Save melody.  
4 Select a transfer method.  
Entertainment  
47  
This is the Internet version of the User's guide. © Print only for private use.  
           
To send a melody  
1 From standby select Menu > Organizer  
> File manager.  
2 Scroll to Music and select Open.  
3 Scroll to a melody and select Options  
> Send.  
Games  
Your phone contains several games.  
You can also download games. Help  
texts are available for most games.  
To start a game  
1 From standby select Menu  
> Entertainment > Games.  
2 Select a game.  
4 Select a transfer method.  
Make sure the receiving device supports  
the transfer method you select.  
To end a game  
To receive a melody  
Follow the instructions that appear.  
Press  
.
Gaming control  
You cannot send a polyphonic melody  
or MP3 file in a text message.  
The keys on your phone can be used  
for different gaming control functions.  
For some games you can tilt the entire  
phone left, right, up and down for  
gaming control.  
Sound recorder  
You can record a voice memo or a call.  
Recorded sounds can also be set as  
ringtones.  
In some countries or states it is required  
by law that you inform the other person  
before recording the call.  
To record a sound  
From standby select Menu  
> Entertainment > Record sound.  
To listen to a recording  
1 From standby select Menu > Organizer  
> File manager.  
2 Scroll to Music and select Open.  
3 Scroll to a recording and select Play.  
48  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
         
Java application screen size  
Some Java applications are designed  
for a specific screen size. For more  
information, contact the application  
vendor.  
Applications  
You can download and run Java  
applications. You can also view  
information or set different  
permissions.  
To set the screen size for a Java  
application  
1 From standby select Menu > Organizer  
> Applications.  
Before you use Java™ applications  
If settings are not already entered in  
your phone, see Settings on page 50.  
To select a Java application  
1 From standby select Menu > Organizer  
> Applications.  
2 Scroll to an application and select  
Options > Screen size.  
3 Select an option.  
2 Select an application.  
Internet profiles for Java applications  
Some Java applications need to  
connect to the Internet to receive  
information. Most Java applications  
use the same Internet settings as your  
Web browser.  
To view information about a Java  
application  
1 From standby select Menu > Organizer  
> Applications.  
2 Scroll to an application and select  
Options > Information.  
To set permissions for a Java  
application  
1 From standby select Menu > Organizer  
> Applications.  
2 Scroll to an application and select  
Options > Permissions.  
3 Set permissions.  
Entertainment  
This is the Internet version of the User's guide. © Print only for private use.  
49  
       
To enter a phone name  
Connectivity  
1 From standby select Menu > Settings  
> the Connectivity tab > Phone name.  
2 Enter the phone name and select OK.  
Settings  
Before you synchronize with an  
Internet service, use the Internet,  
PlayNow™, My friends, Java, picture  
messaging, email and picture blog you  
need to have settings in your phone.  
Using the Internet  
You can use the Internet to access  
online services.  
If settings are not already entered,  
you can download settings using the  
setup wizard or by going to  
To start browsing  
1 From standby select Menu > Internet.  
2 Select Options > Go to.  
3 Select an option.  
To download settings using the  
Setup wizard  
1 From standby select Menu > Settings  
> the General tab > Setup wizard  
> Settings download.  
To exit the browser  
When you browse the Internet, select  
Options > Exit browser.  
To make a call while browsing  
2 Follow the instructions that appear.  
When you browse the Internet press  
.
Contact your network operator or  
service provider for more information.  
To save an item from a Web page  
1 When you browse the Internet, select  
an item.  
2 Select Options > Tools and save the  
item.  
To download settings using a  
computer  
2 Follow the instructions on the screen.  
To find text on a Web page  
1 When you browse the Internet, select  
Options > Tools > Find on page.  
2 Enter text and press Find.  
Phone name  
You can enter a name for your phone  
to be shown to other devices.  
50  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
           
To send a link  
Key  
Shortcut  
1 When you browse the Internet, select  
Options > Tools > Send link.  
2 Select an option.  
Bookmarks  
-
Enter text to Enter  
address, Search Internet  
or search in Bookmarks.  
Using bookmarks  
You can create and edit bookmarks as  
quick links to your favourite Web  
pages.  
Fullscreen or Landscape  
or Normal screen.  
Zoom  
To create a bookmark  
Pan & zoom (when  
Smart-Fit is off).  
1 When you browse the Internet, select  
Options > Tools > Add bookmark.  
2 Enter a title and an address. Select  
Save.  
Internet security and certificates  
Your phone supports secure  
browsing. Certain Internet services,  
such as banking, require certificates in  
your phone. Your phone may already  
contain certificates when you buy it or  
you can download new certificates.  
To select a bookmark  
1 From standby select Menu > Internet.  
2 Select Options > Go to > Bookmarks.  
3 Scroll to a bookmark and select Go to.  
Internet keypad shortcuts  
You can use the keypad to go directly  
to an Internet browser function.  
To view certificates in the phone  
From standby select Menu > Settings  
> the General tab > Security  
> Certificates.  
To select Internet keypad shortcuts  
1 From standby select Menu > Internet.  
2 Select Options > Advanced > Keypad  
mode > Shortcuts.  
Web feeds  
You can receive frequently updated  
content, such as podcasts or news  
headlines, as Web feeds. You can add  
feeds for a page, if it has the  
icon.  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
51  
       
To add new feeds for a Web page  
When you browse a page on the  
Internet that has Web feeds, select  
Options > Web feeds.  
Before you use Bluetooth wireless  
technology  
You must turn on the Bluetooth  
function to communicate with other  
devices. You must also pair your  
phone with other Bluetooth devices.  
To create a new Web feed  
1 From standby select Menu > Messaging  
> Web feeds > Options > New feed.  
2 Enter the address and select Go to.  
To turn the Bluetooth function on  
From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Turn on.  
To set options for Web feeds  
1 From standby select Menu > Messaging  
> Web feeds.  
2 Scroll to a Web feed and select Options.  
3 Select an option.  
Make sure that the device you want to  
pair your phone with has the Bluetooth  
function activated and is made visible.  
To pair the phone with a device  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth > My  
devices.  
2 Scroll to New device and select Add to  
search for available devices.  
3 Select a device.  
Bluetooth™ wireless  
technology  
The Bluetooth function makes wireless  
connection to other Bluetooth devices  
possible. You can, for example:  
Connect to handsfree devices.  
Connect to several devices at the  
same time.  
4 Enter a passcode, if required.  
To allow connection to the phone  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth > My  
devices.  
2 Select a device from the list.  
3 Select Options > Allow connection.  
Connect to computers and access  
the Internet.  
Exchange items and play  
multiplayer games.  
We recommend a range within 10 metres  
(33 feet), with no solid objects in between,  
for Bluetooth communication.  
52  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
     
To pair the phone with a Bluetooth  
handsfree for the first time  
2 When you receive an item, follow the  
instructions that appear.  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree.  
2 Select Yes.  
3 Enter a passcode, if required.  
Transferring sound to and from a  
Bluetooth handsfree  
You can transfer the sound to and  
from a Bluetooth handsfree using a  
phone key or the handsfree key.  
To pair the phone with more than one  
Bluetooth handsfree  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree > My handsfree > New  
handsfree.  
To transfer sound  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Handsfree > Incoming call.  
2 Select an option. In phone transfers  
sound to the phone. In handsfree  
transfers sound to the handsfree.  
2 Scroll to a device and select Add.  
Power saving  
To transfer sound during a call  
1 During a call, select Sound > Transfer  
sound.  
You can save battery power with the  
Power save function. You can only  
connect with a single Bluetooth device.  
You must turn this function off if you  
want to connect with more than one  
Bluetooth device at the same time.  
2 Select from the list.  
File transfer  
You can synchronize and transfer files  
using Bluetooth wireless technology.  
See Synchronization using a computer  
on page 55.  
To turn powersave on  
From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Powersave > On.  
Using the USB cable  
To receive an item  
You can connect your phone to  
a computer with the USB cable to  
transfer files using Mass storage or  
Media transfer. You can also  
1 From standby select Menu > Settings  
> the Connectivity tab > Bluetooth  
> Turn on.  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
53  
       
synchronize, transfer files and use your  
phone as a modem using Phone mode.  
For more information go to the Getting  
started section at  
To use media transfer and mass  
storage mode  
Before you use the USB cable  
You need one of these operating  
systems to transfer files using a USB  
cable:  
Windows® 2000  
Windows XP (Pro and Home)  
Windows Vista (32 bit and 64 bit  
versions of: Ultimate, Enterprise,  
Business, Home Premium, Home  
Basic)  
Before transferring files you must install  
the Sony Ericsson PC Suite software on  
your computer. See To install the  
Sony Ericsson PC Suite on page 56.  
Media transfer and Mass storage  
You can drag and drop files between  
your phone or memory card and a  
computer in Microsoft Windows  
Explorer.  
1 Connect the USB cable to the phone  
and the computer.  
2 Phone: Select Mass storage > Menu  
> Settings > the Connectivity tab > USB  
> USB mode > Mass storage. The  
phone will shut down in this mode and  
restart when disconnected from the  
USB cable.  
3 Phone: Select Media transfer and the  
phone will remain activated during file  
transfer.  
Only use a USB cable supported by your  
phone. Do not remove the USB cable  
from your phone or computer during file  
transfer as this may corrupt the phone  
memory or the memory card.  
4 Computer: Wait until the phone  
memory and memory card appear as  
external disks in Windows Explorer.  
5 Drag and drop selected files between  
the phone and the computer.  
54  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
To disconnect the USB cable safely  
1 Right-click the removable disk icon in  
Windows Explorer.  
Synchronizing  
You can use the USB cable or Bluetooth  
wireless technology to synchronize  
phone contacts, appointments,  
bookmarks, tasks and notes with a  
computer program such as Microsoft  
Outlook. You can also synchronize  
with an Internet service using SyncML  
or a Microsoft® Exchange Server using  
Exchange ActiveSync. For more  
information go to the Getting started  
section at  
2 Select Eject.  
3 Disconnect the USB cable when the  
following message is shown in the  
phone: Mass storage session ended. It  
is now safe to remove the USB cable.  
Phone mode  
Before synchronizing or using your  
phone as a modem you must install  
the Sony Ericsson PC Suite software  
on your computer. See To install the  
Sony Ericsson PC Suite on page 56.  
Use only one of the synchronization  
methods at a time with your phone.  
To use phone mode  
Synchronization using a computer  
Before synchronizing you need to  
install the Sony Ericsson PC Suite  
from the CD included with your phone.  
The software includes help  
information. You can also go to  
to download the software.  
1 Computer: Start PC Suite from Start/  
Programs/Sony Ericsson/PC Suite.  
2 Connect the USB cable to the phone  
and the computer.  
3 Phone: Select Phone mode > Menu  
> Settings > the Connectivity tab > USB  
> USB mode > Phone mode.  
4 Computer: When you are notified that  
the Sony Ericsson PC Suite has found  
your phone, you can start using the  
phone mode applications.  
You need one of these operating  
systems to use the PC Suite on your  
computer:  
Windows XP (Pro and Home)  
Windows Vista (32 bit and 64 bit  
versions of: Ultimate, Enterprise,  
Business, Home Premium, Home  
Basic)  
For usage details, see the Sony Ericsson  
PC Suite Help section once the software  
has been installed on your computer.  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
55  
     
To install the Sony Ericsson PC Suite  
1 Turn on your computer and insert the  
CD. The CD starts automatically and  
the installation window opens.  
2 Select a language and click OK.  
3 Click Install Sony Ericsson PC suite  
and follow the instructions on the  
screen.  
3 Enter a name for the new account and  
select Cont.  
4 Select Server address. Enter the  
required information and select OK.  
5 Enter Username and Password, if  
required.  
6 Scroll to the Applications tab and mark  
applications to synchronize.  
7 Select Database name and enter the  
required information.  
8 Scroll to the Advanced tab to enter  
additional settings for synchronizing.  
9 Select Save.  
Synchronization using an Internet  
service  
You can synchronize online using an  
Internet service with your phone. If  
Internet settings are not in your phone,  
see Settings on page 50.  
To delete an account  
1 From standby select Menu > Organizer  
> Synchronization.  
2 Scroll to an account and select  
Options > Delete.  
Before you start to synchronize  
You must enter settings for SyncML  
synchronization and register a  
synchronization account online with a  
service provider. Settings that are  
required are:  
To start synchronization  
1 From standby select Menu > Organizer  
> Synchronization.  
Server address – server URL  
Database name – database to  
synchronize with  
2 Scroll to an account and select Start.  
Synchronization using a Microsoft®  
Exchange Server  
To enter settings for SyncML  
1 From standby select Menu > Organizer  
> Synchronization.  
2 Scroll to New account and select Add  
> SyncML.  
You can access and synchronize  
corporate exchange information such  
as email, contacts and calendar  
entries with a Microsoft® Exchange  
Server using your phone.  
56  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
For more information on synchronization  
settings, contact your IT administrator.  
Update service  
You can update your phone with the  
latest software. You do not lose  
personal or phone information.  
Before you start to synchronize  
You must enter settings for Exchange  
ActiveSync to access a Microsoft  
Exchange Server. Settings that are  
required are:  
There are two ways to update your  
phone:  
Over the air using your phone  
Using the provided USB cable and  
an Internet-connected computer  
Server address – server URL  
Domain – server domain  
Username – account username  
Password – account password  
Update service requires data access  
such as GPRS, 3G or HSDPA.  
To enter settings for Exchange  
ActiveSync  
1 From standby select Menu > Organizer  
> Synchronization.  
Before you use the Update service  
If settings are not in your phone see  
2 Scroll to New account and select Add  
> ActiveSync.  
To view the current software in the  
phone  
3 Enter a name for the new account and  
select Cont.  
4 Enter the required settings.  
5 Scroll between the tabs to enter  
additional settings.  
1 From standby select Menu > Settings  
> the General tab > Update service.  
2 Select Software version.  
To use Update service using the  
phone  
1 From standby select Menu > Settings  
> the General tab > Update service.  
2 Select Search for update and follow  
the instructions that appear.  
6 Select Save.  
To start synchronization  
1 From standby select Menu > Organizer  
> Synchronization.  
2 Scroll to an account and select Start.  
Connectivity  
This is the Internet version of the User's guide. © Print only for private use.  
57  
     
To use Update service using a USB  
cable  
More features  
or click the Sony Ericsson Update  
service in the PC Suite software if  
installed on your computer. See To  
install the Sony Ericsson PC Suite on  
page 56.  
Alarms  
You can set a sound or the radio as an  
alarm signal. The alarm sounds even if  
the phone is turned off. When the alarm  
sounds you can silence it for 9 minutes  
or turn it off.  
2 Select a region and country.  
3 Follow the instructions on the screen.  
To set the alarm  
1 From standby select Menu > Organizer  
> Alarms.  
2 Scroll to an alarm and select Edit.  
3 Scroll to Time: and select Edit.  
4 Enter a time and select OK > Save.  
To set a reminder to use Update  
service  
1 From standby select Menu > Settings  
> the General tab > Update service  
> Settings > Reminder.  
To set the recurrent alarm  
1 From standby select Menu=> Organizer  
> Alarms.  
2 Select an option.  
2 Scroll to an alarm and select Edit.  
3 Scroll to Recurrent: and select Edit.  
4 Scroll to a day and select Mark.  
5 To select another day, scroll to the day  
and select Mark.  
6 Select Done > Save.  
To set the alarm signal  
1 From standby select Menu > Organizer  
> Alarms.  
2 Scroll to an alarm and select Edit.  
3 Scroll to Alarm signal: and select Edit.  
4 Find and select an alarm signal. Select  
Save.  
58  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
     
To silence the alarm  
To set default view  
1 From standby select Menu > Organizer  
> Calendar.  
2 Select Options > Advanced > Default  
view.  
When the alarm sounds, press any key.  
To repeat the alarm, select Snooze.  
To turn off an alarm  
When the alarm sounds, select TurnOff.  
3 Select an option.  
To cancel the alarm  
1 From standby select Menu > Organizer  
> Alarms.  
Appointments  
You can add new appointments or  
reuse existing appointments.  
2 Scroll to an alarm and select TurnOff.  
To add an appointment  
1 From standby select Menu > Organizer  
> Calendar.  
The alarm in silent mode  
You can set the alarm not to sound  
when the phone is in silent mode.  
2 Select a date.  
3 Scroll to New appointment and select  
Add.  
To set an alarm to sound or not in  
silent mode  
1 From standby select Menu > Organizer  
> Alarms.  
4 Enter the information and confirm  
each entry.  
2 Scroll to an alarm and select Edit.  
5 Select Save.  
3 Scroll to the  
4 Scroll to Silent mode and select Edit.  
5 Select an option.  
tab.  
To view an appointment  
1 From standby select Menu > Organizer  
> Calendar.  
2 Select a date.  
3 Scroll to an appointment and select  
View.  
Calendar  
The calendar can be synchronized with  
a computer calendar, with a calendar on  
the Web or with a Microsoft® Exchange  
Server (Microsoft® Outlook®). For  
more information see Synchronizing  
on page 55.  
To edit an appointment  
1 From standby select Menu > Organizer  
> Calendar.  
2 Select a date.  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
59  
     
3 Scroll to an appointment and select  
View.  
4 Select Options > Edit.  
5 Edit the appointment and confirm  
each entry.  
4 Select an option.  
A reminders option set in calendar  
affects a reminders option set in tasks.  
Tasks  
6 Select Save.  
You can add new tasks or reuse  
existing tasks.  
To send an appointment  
1 From standby select Menu > Organizer  
> Calendar.  
2 Select a date.  
3 Scroll to an appointment and select  
Options > Send.  
To add a task  
1 From standby select Menu > Organizer  
> Tasks.  
2 Select New task and select > Add.  
3 Select an option.  
4 Enter details and confirm each entry.  
4 Select a transfer method.  
Make sure the receiving device supports  
the transfer method you select.  
To view a task  
1 From standby select Menu > Organizer  
> Tasks.  
To view a calendar week  
1 From standby select Menu > Organizer  
> Calendar.  
2 Select a date.  
3 Select Options > View week.  
2 Scroll to a task and select View.  
To reuse an existing task  
1 From standby select Menu > Organizer  
> Tasks.  
To set when reminders should sound  
1 From standby select Menu > Organizer  
> Calendar.  
2 Scroll to a task and select View.  
3 Select Options > Edit.  
4 Edit the task and select Cont.  
5 Choose to set a reminder.  
2 Select a date.  
3 Select Options > Advanced >  
Reminders.  
To send a task  
1 From standby select Menu > Organizer  
> Tasks.  
60  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
       
2 Scroll to a task and select Options  
> Send.  
3 Select a transfer method.  
2 Press  
or  
to select ÷ x - + . % =.  
Code memo  
You can save security codes, for  
example, for credit cards. You must  
set a passcode to open the code  
memo.  
Make sure the receiving device supports  
the transfer method you select.  
To set when reminders should sound  
1 From standby select Menu > Organizer  
> Tasks.  
2 Scroll to a task and select Options  
> Reminders.  
Checkword  
The checkword confirms that you  
have entered the correct passcode. If  
the passcode is correct, the correct  
codes are shown. If the passcode is  
incorrect, the checkword and the  
codes shown are also incorrect.  
3 Select an option.  
A reminders option set in tasks affects  
a reminders option set in calendar.  
To open code memo for the first time  
1 From standby select Menu > Organizer  
> Code memo.  
Timer, stopwatch and  
calculator  
2 Follow the instructions that appear  
and select Cont..  
3 Enter a passcode and select Cont.  
4 Confirm the passcode and select  
Cont.  
To use the timer  
1 From standby select Menu > Organizer  
> Timer.  
2 Enter the hours, minutes and seconds.  
3 Select Start.  
5 Enter a checkword and select Done.  
To use the stopwatch  
1 From standby select Menu > Organizer  
> Stopwatch > Start.  
To add a code  
1 From standby select Menu > Organizer  
> Code memo.  
2 Enter a passcode and select Cont.  
3 Scroll to New code and select Add.  
2 To view a new lap time, select Lap.  
To use the calculator  
1 From standby select Menu > Organizer  
> Calculator.  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
61  
             
4 Enter a name associated with the  
code and select Cont..  
5 Enter the code and select Done.  
Profiles  
To select a profile  
1 From standby select Menu > Settings  
> the General tab > Profiles.  
2 Select a profile.  
To change a passcode  
1 From standby select Menu > Organizer  
> Code memo.  
2 Enter your passcode and select  
Options.  
3 Select Options > Change passcode.  
4 Re-enter the new passcode and select  
Cont.  
To view and edit a profile  
1 From standby select Menu > Settings  
> the General tab > Profiles.  
2 Scroll to a profile and select Options  
> View and edit.  
5 Enter a checkword and select Done.  
You cannot rename the Normal profile.  
Forget your passcode?  
To reset all profiles  
1 From standby select Menu > Settings  
> the General tab > Profiles.  
If you forget your passcode, you must  
reset the code memo. This means that  
all entries in the code memo are deleted.  
The next time you enter the code memo,  
you must proceed as if you are opening  
it for the first time. See To open code  
2 Select Options > Reset profiles.  
Time and date  
To set the time  
To reset code memo  
1 From standby select Menu > Organizer  
> Code memo.  
1 From standby select Menu > Settings  
> the General tab > Time & date > Time.  
2 Enter the time and select Save.  
2 Enter any passcode to access the code  
memo. The checkword and codes that  
are then shown are incorrect.  
3 Select Options > Reset.  
4 Reset code memo? appears.  
5 Select Yes.  
To set the date  
1 From standby select Menu > Settings  
> the General tab > Time & date > Date.  
2 Enter the date and select Save.  
62  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
       
To set the time zone  
To edit the PIN  
1 From standby select Menu > Settings  
> the General tab > Time & date > My  
time zone.  
1 From standby select Menu > Settings  
> the General tab > Security > Locks  
> SIM protection > Change PIN.  
2 Enter your PIN and select OK.  
3 Enter a new four-to-eight-digit PIN  
and select OK.  
2 Select the time zone you are in by city.  
If you select a city, My time zone also  
updates the time when daylight saving  
time changes.  
4 Re-enter the new PIN and select OK.  
If Codes do not match appears, you  
entered the new PIN incorrectly.  
If Wrong PIN appears, followed by  
Old PIN:, you entered your old PIN  
incorrectly.  
Locks  
SIM card lock  
This lock only protects your  
subscription. Your phone will work with  
a new SIM card. If the lock is on, you  
have to enter a PIN (Personal Identity  
Number).  
To use the SIM card lock  
1 From standby select Menu > Settings  
> the General tab > Security > Locks  
> SIM protection > Protection.  
2 Select an option.  
If you enter your PIN incorrectly three  
times in a row, the SIM card is blocked  
and you need to enter your PUK  
(Personal Unblocking Key). Your PIN  
and PUK are supplied by your network  
operator.  
3 Enter your PIN and select OK.  
Phone lock  
You can stop unauthorized use of your  
phone. Change the phone lock code  
(0000) to any four-to-eight-digit  
personal code.  
To unblock the SIM card  
1 When PIN blocked appears, enter your  
PUK and select OK.  
2 Enter a new four-to-eight-digit PIN  
and select OK.  
It is important that you remember your  
new code. If you forget it, you have to  
take your phone to your local  
Sony Ericsson retailer.  
3 Re-enter the new PIN and select OK.  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
63  
               
To use the phone lock  
1 From standby select Menu > Settings  
> the General tab > Security > Locks  
> Phone protection > Protection.  
2 Select an option.  
To unlock the keypad manually  
From standby, press any key and  
select Unlock > OK.  
IMEI number  
Keep a copy of your IMEI (International  
Mobile Equipment Identity) number in  
case your phone is stolen.  
3 Enter the phone lock code and select  
OK.  
To unlock the phone  
Enter your code and select OK.  
To view your IMEI number  
From standby press  
,
,
,
,
.
To change the phone lock code  
1 From standby select Menu > Settings  
> the General tab > Security > Locks  
> Phone protection > Change code.  
2 Enter the old code and select OK.  
3 Enter the new code and select OK.  
4 Repeat the code and select OK.  
Keypad lock  
You can set this lock to avoid  
accidental dialling. Incoming calls can  
be answered without unlocking the  
keypad.  
Calls to the international emergency  
number 112 can still be made.  
To use the automatic keylock  
1 From standby select Menu > Settings  
> the General tab > Security >  
Automatic keylock.  
2 Select an option.  
64  
More features  
This is the Internet version of the User's guide. © Print only for private use.  
     
I cannot charge the phone or battery  
capacity is low  
The charger is not properly connected  
or the battery connection is poor.  
Remove the battery and clean the  
connectors.  
Troubleshooting  
Some problems will require you to call  
your network operator.  
For more support go to  
The battery is worn out and needs to  
be replaced. See Charging the battery  
on page 7.  
Common questions  
I have problems with memory  
capacity or the phone is working  
slowly  
Restart your phone every day to free  
memory or do a Master reset.  
No battery icon appears when I start  
charging the phone  
It may take a few minutes before the  
battery icon appears on the screen.  
Master reset  
Some menu options appear in grey  
A service is not activated. Contact  
your network operator.  
If you select Reset settings, the  
changes that you have made to  
settings will be deleted.  
I cannot use SMS/text messages on  
my phone  
If you select Reset all, in addition to  
your changes to settings, all contacts,  
messages, personal data, and content  
that you have downloaded, received  
or edited will also be deleted.  
Settings are missing or incorrect.  
Contact your network operator to find  
out the correct SMS service centre  
setting. See Text messages on page  
To reset the phone  
1 From standby select Menu > Settings  
> the General tab > Master reset.  
2 Select an option.  
I cannot use picture messages on my  
phone  
Your subscription does not include  
data capability. Settings are missing  
or incorrect. Please contact your  
network operator.  
3 Follow the instructions that appear.  
Troubleshooting  
This is the Internet version of the User's guide. © Print only for private use.  
65  
     
See Help in your phone on page 6 or  
to order settings and follow the  
instructions on the screen. See  
The phone cannot be detected by  
other devices using Bluetooth  
wireless technology  
You have not turned the Bluetooth  
function on.  
Make sure that the visibility is set to  
show phone. See To receive an item  
on page 53.  
How do I turn on and off T9 Text  
Input when writing?  
When you enter text, press and hold  
down  
. You will see  
at the top  
I cannot synchronize or transfer data  
between my phone and my  
computer, when using the USB  
cable.  
The cable or software that came  
with your phone has not been  
properly installed. Go to  
Getting started guides which contain  
detailed installation instructions and  
troubleshooting guides.  
of the screen when T9 Text Input is  
activated.  
How do I change phone language?  
1 From standby select Menu > Settings  
> the General tab > Language > Phone  
language.  
2 Select an option.  
I cannot use the Internet  
Your subscription does not include  
data capability. Internet settings are  
missing or incorrect. Please contact  
your network operator.  
Error messages  
Insert SIM  
There is no SIM card in your phone or  
you may have inserted it incorrectly.  
See Help in your phone on page 6 or  
to order Internet settings, and follow  
the instructions on the screen. See  
The SIM card connectors need  
cleaning. If the card is damaged,  
contact your network operator.  
66  
Troubleshooting  
This is the Internet version of the User's guide. © Print only for private use.  
 
Insert correct SIM card  
Your phone is not receiving any  
network signal, or the received signal  
is too weak. Contact your network  
operator and make sure that the  
network has coverage where you are.  
Your phone is set to work only with  
certain SIM cards. Check if you are  
using the correct operator SIM card.  
Wrong PIN/Wrong PIN2  
You have entered your PIN or PIN2  
incorrectly.  
The SIM card is not working properly.  
Insert your SIM card in another phone.  
If this works, it is probably your phone  
that is causing the problem. Please  
contact the nearest Sony Ericsson  
service location.  
Enter the correct PIN or PIN2 and  
on page 5.  
PIN blocked/PIN2 blocked  
Emerg. calls only  
You have entered your PIN or PIN2  
code incorrectly three times in a row.  
You are within range of a network, but  
you are not allowed to use it.  
However, in an emergency, some  
network operators allow you to call the  
international emergency number 112.  
See Emergency calls on page 17.  
To unblock, see SIM card lock on  
page 63.  
Codes do not match  
Codes that you have entered do not  
match. When you want to change a  
security code, for example your PIN,  
you have to confirm the new code.  
See SIM card lock on page 63.  
PUK blocked. Contact operator.  
You entered your personal unblocking  
key code (PUK) incorrectly 10 times in  
a row.  
Charging, alien battery  
No netw. coverage  
Your phone is in flight mode. See  
Flight mode on page 6.  
The battery that you are using is not a  
Sony Ericsson-approved battery. See  
Battery on page 71.  
Troubleshooting  
This is the Internet version of the User's guide. © Print only for private use.  
67  
On www.sonyericsson.com, under the support  
section in the language of your choice, you will find  
the latest support tools and information, such as  
software updates, Knowledge base, phone setup  
and additional help when you require it.  
For operator-specific services and features, please  
contact your network operator for more information.  
You can also contact our Call Centers. See the  
phone number for the nearest Call Center in the list  
below. If your country/region is not represented in  
the list, please contact your local dealer. (The  
phone numbers below were correct at the time of  
going to print. On www.sonyericsson.com you can  
always find the latest updates.  
In the unlikely event that your product needs  
service please contact the dealer from whom it was  
purchased or one of our service partners. Save  
your original proof of purchase, you will need it if  
you need to claim warranty.  
Important information  
Sony Ericsson Consumer Web site  
section where help and tips are only a few clicks  
away. Here you will find the latest computer  
software updates and tips on how to use your  
product more efficiently.  
Service and support  
From now on you will have access to a portfolio of  
exclusive service advantages such as:  
Global and local Web sites providing support.  
A global network of Call Centers.  
An extensive network of Sony Ericsson service  
partners.  
A warranty period. Learn more about the warranty  
conditions in this User guide.  
For a call to one of our Call Centers you will be  
charged according to national rates, including  
local taxes, unless the phone number is a toll-free  
number.  
Country  
Argentina  
Australia  
Austria  
Belgium  
Brazil  
Canada  
Central Africa  
Chile  
China  
Colombia  
Croatia  
Czech Republic  
Denmark  
Finland  
Phone number  
800-333-7427  
1-300 650 050  
0810 200245  
02-7451611  
Email address  
4001-0444  
1-866-766-9374  
+27 112589023  
123-0020-0656  
4008100000  
18009122135  
062 000 000  
844 550 055  
33 31 28 28  
09-299 2000  
68  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
France  
Germany  
Greece  
0 825 383 383  
0180 534 2020  
801-11-810-810  
210-89 91 919 (from mobile)  
Hong Kong  
Hungary  
India  
8203 8863  
+36 1 880 4747  
39011111  
(Add STD code when dialling  
from a GSM connection)  
Indonesia  
Ireland  
Italy  
Lithuania  
Malaysia  
Mexico  
Netherlands  
New Zealand  
Norway  
021-2701388  
1850 545 888  
06 48895206  
8 700 55030  
1-800-889900  
01 800 000 4722  
0900 899 8318  
0800-100150  
815 00 840  
Pakistan  
111 22 55 73  
Outside Karachi:  
(92-21) 111 22 55 73  
Philippines  
Poland  
Portugal  
Romania  
Russia  
Singapore  
Slovakia  
South Africa  
Spain  
Sweden  
Switzerland  
Taiwan  
Thailand  
02-6351860  
0 (prefix) 22 6916200  
808 204 466  
(+4021) 401 0401  
8(495) 787 0986  
67440733  
02-5443 6443  
0861 632222  
902 180 576  
013-24 45 00  
0848 824 040  
02-25625511  
02-2483030  
0212 47 37 777  
(+380) 44 590 1515  
43 919880  
Turkey  
Ukraine  
United Arab Emirates  
United Kingdom  
08705 23 7237  
Important information  
69  
This is the Internet version of the User's guide. © Print only for private use.  
United States  
Venezuela  
1-866-766-9374  
0-800-100-2250  
Do not use your product near medical equipment  
without requesting permission from your treating  
physician or authorized medical staff.  
Do not use your product when in, or around aircraft,  
or areas showing the sign “turn off two-way radio”.  
Do not use your product in an area  
where a potentially explosive  
Guidelines for Safe and  
Efficient Use  
Please read this information before  
using your mobile phone.  
These instructions are intended for  
your safety. Please follow these  
guidelines. If the product has been  
subject to any of the conditions listed  
below or you have any doubt as to its proper  
function make sure you have the product checked  
by a certified service partner before charging or  
using it. Failure to do so might entail a risk of  
product malfunction or even a potential hazard to  
your health.  
atmosphere exists.  
Do not place your product or install  
wireless equipment in the area above  
an air bag in your car.  
Caution: Cracked or broken displays may create  
sharp edges or splinters that could be harmful upon  
contact.  
CHILDREN  
KEEP OUT OF CHILDRENS REACH.  
Recommendations for safe use of  
product (mobile phone, battery,  
charger and other accessories)  
Always treat your product with care and keep it in  
a clean and dust-free place.  
Warning! May explode if disposed of in fire.  
Do not expose your product to liquid or moisture or  
humidity.  
Do not expose your product to extreme  
high or low temperatures. Do not  
expose the battery to temperatures  
above +60°C (+140°F).  
DO NOT ALLOW CHILDREN TO PLAY  
WITH YOUR MOBILE PHONE OR ITS  
ACCESSORIES. THEY COULD HURT  
THEMSELVES OR OTHERS, OR COULD  
ACCIDENTALLY DAMAGE THE MOBILE PHONE  
OR ACCESSORY. YOUR MOBILE PHONE OR ITS  
ACCESSORY MAY CONTAIN SMALL PARTS THAT  
COULD BECOME DETACHED AND CREATE A  
CHOKING HAZARD.  
Power supply (Charger)  
Connect the AC power adapter only to designated  
power sources as marked on the product. Make  
sure the cord is positioned so that it will not be  
subjected to damage or stress. To reduce risk of  
electric shock, unplug the unit from any power  
source before attempting to clean it. The AC power  
adapter must not be used outdoors or in damp  
areas. Never alter the cord or plug. If the plug does  
not fit into the outlet, have a proper outlet installed  
by a qualified electrician.  
Do not expose your product to open  
flames or lit tobacco products.  
Do not drop, throw or try to bend your product.  
Do not paint your product.  
Do not attempt to disassemble or  
modify your product. Only  
Sony Ericsson authorised personnel  
should perform service.  
70  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
   
Use only Sony Ericsson branded original chargers  
intended for use with your mobile phone. Other  
chargers may not be designed to the same safety  
and performance standards.  
suspect that interference is taking place,  
immediately turn off your mobile phone. Contact  
your cardiologist for more information.  
For other medical devices, please consult your  
physician and the manufacturer of the device.  
Battery  
Driving  
We recommend that you fully charge the battery  
before you use your mobile phone for the first time.  
A new battery or one that has not been used for a  
long time could have reduced capacity the first few  
times it is used. The battery should only be charged  
in temperatures between +5°C (+41°F) and +45°C  
(+113°F).  
Please check if local laws and regulations restrict  
the use of mobile phones while driving or require  
drivers to use handsfree solutions. We recommend  
that you use only Sony Ericsson handsfree solutions  
intended for use with your product.  
Please note that because of possible interference to  
electronic equipment, some vehicle manufacturers  
forbid the use of mobile phones in their vehicles  
unless a handsfree kit with an external antenna has  
been installed.  
Always pay full attention to driving and pull off the  
road and park before making or answering a call if  
driving conditions so require.  
Use only Sony Ericsson branded original batteries  
intended for use with your mobile phone. Using  
other batteries and chargers could be dangerous.  
Talk and standby times depend on several different  
conditions such as signal strength, operating  
temperature, application usage patterns, features  
selected and voice or data transmissions when the  
mobile phone is being used.  
Turn off your mobile phone before removing the  
battery. Do not put the battery into your mouth.  
Battery electrolytes may be toxic if swallowed.  
Do not let the metal contacts on the battery touch  
another metal object. Doing this could short-circuit  
and damage the battery. Use the battery for the  
intended purpose only.  
Emergency calls  
Mobile phones operate using radio signals, which  
cannot guarantee connection in all conditions. You  
should therefore never rely solely upon any mobile  
phone for essential communications (e.g. medical  
emergencies).  
Emergency calls may not be possible in all areas,  
on all cellular networks, or when certain network  
services and/or mobile phone features are in use.  
Check with your local service provider.  
Personal medical devices  
Mobile phones may affect the operation of  
pacemakers and other implanted equipment.  
Please avoid placing the mobile phone over the  
pacemaker, e.g. in your breast pocket. When using  
the mobile phone, use it at the ear on the opposite  
side of the body to the pacemaker. If a minimum  
distance of 15 cm (6 inches) is kept between the  
mobile phone and the pacemaker, the risk of  
interference is limited. If you have any reason to  
Antenna  
This phone contains a built-in antenna. Use of  
antenna devices not marketed by Sony Ericsson  
specifically for this model could damage your  
mobile phone, reduce performance, and produce  
SAR levels above the established limits (see below).  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
71  
 
For phones sold in the US, before a phone model  
is available for sale to the public, it must be tested  
and certified by the Federal Communications  
Commission (FCC) that it does not exceed the limit  
established by the government-adopted requirement  
for safe exposure. The tests are performed in  
positions and locations (that is, at the ear and worn  
on the body) as required by the FCC for each model.  
For body-worn operation, this phone has been tested  
and meets FCC RF exposure guidelines when the  
handset is positioned a minimum of 15 mm from  
the body without any metal parts in the vicinity of  
the phone or when used with the original  
Sony Ericsson accessory intended for this phone  
and worn on the body. Use of other accessories  
may not ensure compliance with FCC RF exposure  
guidelines.  
A separate leaflet with SAR information about this  
mobile phone model is included with the material  
accompanying this mobile phone. This information  
can also be found, together with more information  
on radio frequency exposure and SAR, on:  
Efficient use  
Hold your mobile phone as you would any other  
phone. Do not cover the top of the phone when it  
is in use, as this affects call quality and may cause  
the phone to operate at a higher power level than  
needed, thus shortening talk and standby times.  
Radio frequency (RF) exposure and  
Specific Absorption Rate (SAR)  
Your mobile phone is a low-power radio transmitter  
and receiver. When it is turned on, it emits low levels  
of radio frequency energy (also known as radio  
waves or radio frequency fields).  
Governments around the world have adopted  
comprehensive international safety guidelines,  
developed by scientific organizations, e.g. ICNIRP  
(International Commission on Non-Ionizing Radiation  
Protection) and IEEE (The Institute of Electrical and  
Electronics Engineers Inc.), through periodic and  
thorough evaluation of scientific studies. These  
guidelines establish permitted levels of radio wave  
exposure for the general population. The levels  
include a safety margin designed to assure the  
safety of all persons, regardless of age and health,  
and to account for any variations in measurements.  
Specific Absorption Rate (SAR) is the unit of  
measurement for the amount of radio frequency  
energy absorbed by the body when using a mobile  
phone. The SAR value is determined at the highest  
certified power level in laboratory conditions, but  
the actual SAR level of the mobile phone while it  
is operating can be well below this value. This is  
because the mobile phone is designed to use the  
minimum power required to reach the network.  
Accessible Solutions/Special Needs  
For phones sold in the US, you can use your TTY  
terminal with your Sony Ericsson mobile phone  
(with the necessary accessory). For information on  
Accessible Solutions for individuals with special  
needs call the Sony Ericsson Special Needs Center  
on 877 878 1996 (TTY) or 877 207 2056 (voice), or  
visit the Sony Ericsson Special Needs Center at  
Disposal of old electrical  
and electronic equipment  
This symbol indicates that all  
electrical and electronic equipment  
included shall not be treated as  
household waste. Instead it shall be left at the  
appropriate collection point for recycling of  
Variations in SAR below the radio frequency  
exposure guidelines do not mean that there are  
variations in safety. While there may be differences  
in SAR levels among mobile phones, all  
Sony Ericsson mobile phone models are designed  
to meet radio frequency exposure guidelines.  
72  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
electrical and electronic equipment. By ensuring  
this product is disposed of correctly, you will help  
prevent potential negative consequences for the  
environment and human health, which could  
otherwise be caused by inappropriate waste  
handling of this product. The recycling of materials  
will help to conserve natural resources. For more  
detailed information about recycling this product,  
please contact your local city office, your  
Precautions on Memory Card Use  
Do not expose the memory card to moisture.  
Do not touch terminal connections with your hand  
or any metal object.  
Do not strike, bend, or drop the memory card.  
Do not attempt to disassemble or modify the  
memory card.  
Do not use or store the memory card in humid or  
corrosive locations or in excessive heat such as  
a closed car in summer, in direct sunlight or near  
a heater, etc.  
household waste disposal service or the shop  
where you purchased the product.  
Do not press or bend the end of the memory card  
adapter with excessive force.  
Disposing of the battery  
Please check local regulations for  
disposal of batteries or call your local  
Sony Ericsson Call Center for  
information.  
Do not let dirt, dust, or foreign objects get into the  
insert port of any memory card adapter.  
Check you have inserted the memory card correctly.  
Insert the memory card as far as it will go into any  
memory card adapter needed. The memory card  
may not operate properly unless fully inserted.  
We recommend that you make a backup copy of  
important data. We are not responsible for any loss  
or damage to content you store on the memory card.  
Recorded data may be damaged or lost when you  
remove the memory card or memory card adapter,  
turn off the power while formatting, reading or  
writing data, or use the memory card in locations  
subject to static electricity or high electrical field  
emissions.  
The battery should never be placed in municipal  
waste. Use a battery disposal facility if available.  
Memory card  
Your product comes complete with a removable  
memory card. It is generally compatible with the  
handset purchased but may not be compatible with  
other devices or the capabilities of their memory  
cards. Check other devices for compatibility before  
purchase or use.  
The memory card is formatted prior to shipping.  
To reformat the memory card, use a compatible  
device. Do not use the standard operating system  
format when formatting the memory card on a PC.  
For details, refer to the operating instructions of the  
device or contact customer support.  
Protection of personal information  
To safeguard your privacy and prevent information  
being accessible to a third party, you should erase  
all personal data before selling or disposing of the  
product. To delete personal data, perform a master  
reset and remove the memory card. DELETION OF  
MATERIAL FROM THE PHONE MEMORY DOES  
NOT ENSURE THAT SAID INFORMATION  
WARNING:  
If your device requires an adapter for insertion into  
the handset or another device, do not insert the  
card directly without the required adapter.  
CANNOT BE RECOVERED BY A SUBSEQUENT  
USER. SONY ERICSSON DOES NOT WARRANT  
AGAINST A SUBSEQUENT USER OF THE DEVICE  
ACCESSING YOUR INFORMATION AND DOES  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
73  
NOT ASSUME ANY RESPONSIBILITY FOR  
SUBSEQUENT DISCLOSURE OF SAID  
INFORMATION EVEN IF A MASTER RESET HAS  
BEEN PERFORMED. If you are concerned about  
such potential disclosure retain your device or  
secure its permanent destruction.  
avoidance of doubt, you are at all times entitled to  
transfer all rights and obligations to the Software to  
a third party, solely together with the Device with  
which you received the Software, provided always  
that such third party agrees in writing to be bound  
by these rules.  
You are granted this license for a term of the useful  
life of this Device. You can terminate this license by  
transferring all your rights to the Device on which  
you have received the Software to a third party in  
writing. If you fail to comply with any of the terms  
and conditions set out in this license, it will  
terminate with immediate effect.  
Accessories  
Sony Ericsson recommends use of Sony Ericsson  
original accessories for safe and efficient use of its  
products. Use of third-party accessories may  
decrease performance or pose a risk to your health  
or safety.  
Sony Ericsson and its third party suppliers and  
licensors are the sole and exclusive owner of and  
retain all rights, title and interest in and to the  
Software. Sony Ericsson, and, to the extent that the  
Software contains material or code of a third party,  
such third party, shall be entitled third party  
beneficiaries of these terms.  
The validity, construction and performance of this  
license shall be governed by the laws of Sweden.  
The foregoing shall apply to the full extent permitted  
by, when applicable, statutory consumer rights.  
LOUDNESS WARNING:  
Please adjust the audio volume cautiously when  
using third-party audio accessories to avoid  
volume levels that may be harmful to your hearing.  
Sony Ericsson does not test use of third-party  
audio accessories with this mobile phone.  
Sony Ericsson recommends using only  
Sony Ericsson original audio accessories.  
End User Licence Agreement  
This wireless device, including without limitation  
any media delivered with the device, (“Device”)  
contains software owned by Sony Ericsson Mobile  
Communications AB and its affiliated companies  
(“Sony Ericsson”) and its third party suppliers and  
licensors (“Software”).  
Limited Warranty  
Sony Ericsson Mobile Communications AB, SE-221  
88 Lund, Sweden, (Sony Ericsson) or its local  
affiliated company, provides this Limited Warranty  
for your mobile phone, original accessory delivered  
with your mobile phone, and/or your mobile  
computing product (hereinafter referred to as  
“Product”).  
As user of this Device, Sony Ericsson grants you  
a non-exclusive, non-transferable, non-assignable  
license to use the Software solely in conjunction  
with the Device on which it is installed and/or  
delivered with. Nothing herein shall be construed as  
a sale of the Software to a user of this Device.  
You shall not reproduce, modify, distribute, reverse  
engineer, decompile, otherwise alter or use any  
other means to discover the source code of the  
Software or any component of the Software. For  
Should your Product need warranty service, please  
return it to the dealer from whom it was purchased,  
or contact your local Sony Ericsson Call Center  
(national rates may apply) or visit  
www.sonyericsson.com to get further information.  
74  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
     
Our warranty  
Conditions  
Subject to the conditions of this Limited Warranty,  
Sony Ericsson warrants this Product to be free  
from defects in design, material and workmanship  
at the time of its original purchase by a consumer.  
This Limited Warranty will last for a period of one  
(1) year as from the original date of purchase of the  
Product.  
1
2
3
This Limited Warranty is valid only if the original  
proof of purchase for this Product issued by a  
Sony Ericsson authorized dealer specifying the  
date of purchase and serial number**, is presented  
with the Product to be repaired or replaced.  
Sony Ericsson reserves the right to refuse warranty  
service if this information has been removed or  
changed after the original purchase of the Product  
from the dealer.  
What we will do  
If Sony Ericsson repairs or replaces the Product,  
the repair for the defect concerned, or the replaced  
Product shall be warranted for the remaining time of  
the original warranty period or for ninety (90) days  
from the date of repair, whichever is longer. Repair  
or replacement may involve the use of functionally  
equivalent reconditioned units. Replaced parts or  
components will become the property of  
Sony Ericsson.  
This warranty does not cover any failure of the  
Product due to normal tear and wear, or due to  
misuse, including but not limited to use in other  
than the normal and customary manner, in  
accordance with the Sony Ericsson instructions  
for use and maintenance of the Product. Nor does  
this warranty cover any failure of the Product due  
to accident, software or hardware modification or  
adjustment, acts of God or damage resulting from  
liquid.  
A rechargeable battery can be charged and  
discharged more than a hundred times. However,  
it will eventually wear out – this is not a defect and  
corresponds to normal wear and tear. When the  
talk-time or standby time is noticeably shorter, it  
is time to replace your battery. Sony Ericsson  
recommends that you use only batteries and  
chargers approved by Sony Ericsson.  
If, during the warranty period, this Product fails to  
operate under normal use and service, due to  
defects in design, materials or workmanship,  
Sony Ericsson authorized distributors or service  
partners, in the country* where you purchased the  
Product, will, at their option, either repair or replace  
the Product in accordance with the terms and  
conditions stipulated herein.  
Sony Ericsson and its service partners reserve the  
right to charge a handling fee if a returned Product  
is found not to be under warranty according to the  
conditions below.  
Please note that some of your personal settings,  
downloads and other information may be lost when  
your Sony Ericsson Product is repaired or replaced.  
At present Sony Ericsson may be prevented by  
applicable law, other regulation or technical  
restrictions from making a backup copy of certain  
downloads. Sony Ericsson does not take any  
responsibility for any lost information of any kind  
and will not reimburse you for any such loss. You  
should always make backup copies of all the  
information stored on your Sony Ericsson Product  
such as downloads, calendar and contacts before  
handing in your Sony Ericsson Product for repair or  
replacement.  
Minor variations in display brightness and colour  
may occur between the phones. There may be tiny  
bright or dark dots on the display. These are called  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
75  
defective pixels and occur when individual dots  
have malfunctioned and can not be adjusted. Two  
defective pixels are deemed acceptable.  
Minor variations in camera image appearance may  
occur between phones. This is nothing uncommon  
and is not regarded as a defective camera module.  
Since the cellular system on which the Product is to  
operate is provided by a carrier independent from  
Sony Ericsson, Sony Ericsson will not be  
responsible for the operation, availability, coverage,  
services or range of that system.  
This warranty does not cover Product failures  
caused by installations, modifications, or repair or  
opening of the Product performed by a non-  
Sony Ericsson authorised person.  
The warranty does not cover Product failures which  
have been caused by use of accessories or other  
peripheral devices which are not Sony Ericsson  
branded original accessories intended for use with  
the Product.  
Tampering with any of the seals on the Product will  
void the warranty.  
THERE ARE NO EXPRESS WARRANTIES,  
WHETHER WRITTEN OR ORAL, OTHER THAN  
THIS PRINTED LIMITED WARRANTY. ALL  
IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION THE IMPLIED WARRANTIES OF  
MERCHANTABILITY OR FITNESS FOR A  
PARTICULAR PURPOSE, ARE LIMITED TO THE  
DURATION OF THIS LIMITED WARRANTY. IN NO  
EVENT SHALL SONY ERICSSON OR ITS  
LICENSORS BE LIABLE FOR INCIDENTAL OR  
CONSEQUENTIAL DAMAGES OF ANY NATURE  
WHATSOEVER, INCLUDING BUT NOT LIMITED  
TO LOST PROFITS OR COMMERCIAL LOSS; TO  
THE FULL EXTENT THOSE DAMAGES CAN BE  
DISCLAIMED BY LAW.  
The warranty provided does not affect the  
consumer's statutory rights under applicable  
legislation in force, nor the consumer’s rights  
against the dealer arising from their sales /  
purchase contract.  
*Geographical scope of the warranty  
4
If you have purchased your Product in a country  
member of the European Economic Area (EEA) or  
in Switzerland or the Republic of Turkey, and such  
Product was intended for sale in the EEA or in  
Switzerland or in Turkey, you can have your Product  
serviced in any EEA country or in Switzerland or in  
Turkey, under the warranty conditions prevailing in  
the country in which you require servicing, provided  
that an identical Product is sold in such country by  
an authorised Sony Ericsson distributor. To find out  
if your Product is sold in the country you are in,  
please call the local Sony Ericsson Call Center.  
Please observe that certain services may not be  
possible elsewhere than in the country of original  
purchase, for example due to the fact that your  
Product may have an interior or exterior which  
is different from equivalent models sold in other  
countries. Please note in addition that it may  
sometimes not be possible to repair SIM-locked  
Products.  
5
6
7
8
** In some countries/regions additional information  
(such as a valid warranty card) may be requested.  
FCC Statement  
This device complies with Part 15 of  
the FCC rules. Operation is subject to  
the following two conditions:  
(1) This device may not cause  
harmful interference, and  
(2) This device must accept any interference  
received, including interference that may cause  
undesired operation.  
Some countries/states do not allow the exclusion  
or limitation of incidental or consequential damages,  
or limitation of the duration of implied warranties,  
so the preceding limitations or exclusions may not  
apply to you.  
76  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
 
Declaration of Conformity  
We, Sony Ericsson Mobile Communications AB=of  
Nya Vattentornet  
SE-221 88 Lund, Sweden  
declare under our sole responsibility that our  
product  
Sony Ericsson type AAD-3052021-BV  
and in combination with our accessories, to which  
this declaration relates is in conformity with the  
appropriate standards 3GPP TS 51.010-1,  
EN 301908-1, EN 301489-7, EN 301489-24,  
EN 300328, EN 301489-17 and EN 60950,  
following the provisions of, Radio Equipment and  
Telecommunication Terminal Equipment directive  
99/5/EC with requirements covering EMC directive  
89/336/EEC, and Low Voltage directive 73/23/EEC.  
Lund, May 2007  
Shoji Nemoto,  
Head of Product Business Group GSM/UMTS  
We fulfil the requirements of the R&TTE Directive  
(99/5/EC).  
Important information  
This is the Internet version of the User's guide. © Print only for private use.  
77  
   
Index  
A
camera  
contacts  
B
battery  
C
D
calls  
E
78  
Index  
This is the Internet version of the User's guide. © Print only for private use.  
 
F
L
lock  
G
H
M
messages  
I
Internet  
MMS See picture messages  
J
K
Index  
This is the Internet version of the User's guide. © Print only for private use.  
79  
settings  
SIM card  
N
P
PIN code  
SMS See text messages  
SOS See emergency numbers  
R
T
S
sending  
80  
Index  
This is the Internet version of the User's guide. © Print only for private use.  

West Bend 56202 User Manual
Teac AG H600NTZ User Manual
Targus USB 30 ExpressCard 410 2207 001A User Manual
Sony CDX GT300EE User Manual
Siemens HICOM 300 User Manual
Sentra 1209 User Manual
Seagate SAVVIO 10K2 SAS ST9146802SS User Manual
Seagate EE25 SERIES ST930813AM User Manual
Samsung E1210S User Manual
Philips AZ 6897 User Manual