Sony Ericsson T637 User Manual

Please read the Guidelines for Safe and Efficient Use

and the Limited Warranty chapters before you use

your mobile phone.

Sony Ericsson

GSM 850/1800/1900

Second edition (January 2004)

This manual is published by Sony Ericsson Mobile

Communications AB, without any warranty.

Improvements and changes to this manual

necessitated by typographical errors, inaccuracies

of current information, or improvements to programs

and/or equipment, may be made by Sony Ericsson

Mobile Communications AB at any time and without

notice. Such changes will, however, be incorporated

into new editions of this manual.

The BLUETOOTH trademarks are owned by

Bluetooth SIG, Inc.

T9™ Text Input is a trademark or a registered

trademark of Tegic Communications.

T9™ Text Input is licensed under one or more of

the following: U.S. Pat. Nos. 5,818,437, 5,953,541,

5,187,480, 5,945,928, and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

©Sony Ericsson Mobile Communications AB,

2003

Publication number: AE/LZT 123 1751 R2A

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463(96927260.8) DE/DK, FI,

FR, IT, NL, PT, ES, SE, GB; and additional patents

are pending worldwide.

Please note:

Some of the services in this manual are not supported

by all networks.

Java and all Java based trademarks and logos

are trademarks or registered trademarks of Sun

Microsystems, Inc. in the U.S. and other countries.

Please contact your network operator or service

provider if you are in doubt whether you can use

a particular service or not.

End-user license agreement for Sun™ Java™ J2ME™.

Contents

This is the Internet version of the user's guide. © Print only for private use.

1. Restrictions: Software is confidential copyrighted

information of Sun and title to all copies is retained

by Sun and/or its licensors. Customer shall not modify,

decompile, disassemble, decrypt, extract, or otherwise

reverse engineer Software. Software may not be leased,

assigned, or sublicensed, in whole or in part.

time to time) or any country to which the U.S. has

embargoed goods; or (ii) to anyone on the U.S. Treasury

Department's list of Specially Designated Nations or the

U.S. Commerce Department's Table of Denial Orders.

3. Restricted Rights: Use, duplication or disclosure by

the United States government is subject to the restrictions

as set forth in the Rights in Technical Data and Computer

Software Clauses in DFARS 252.227-7013(c) (1) (ii)

and FAR 52.227-19(c) (2) as applicable.

2. Export Regulations: Software, including technical

data, is subject to U.S. export control laws, including

the U.S. Export Administration Act and its associated

regulations, and may be subject to export or import

regulations in other countries. Customer agrees to

comply strictly with all such regulations and

acknowledges that it has the responsibility to obtain

licenses to export, re-export, or import Software.

Software may not be downloaded, or otherwise

exported or re-exported (i) into, or to a national

or resident of, Cuba, Iraq, Iran, North Korea, Libya,

Sudan, Syria (as such listing may be revised from

Part of the software in this product is copyright

Other product and company names mentioned herein

may be the trademarks of their respective owners.

Any rights not expressly granted herein are reserved.

Contents

This is the Internet version of the user's guide. © Print only for private use.

•

Attach and charge the battery.

See “SIM card and battery information” on page 5.

Getting to know your phone

About this user’s guide

Note: Always turn off the phone and detach the

charger before you insert or remove a SIM card.

This chapter gives a quick overview of the main

functions of the phone, shortcuts and general

information.

The SIM card

When you register as a subscriber with a network

operator, you get a SIM (Subscriber Identity Module)

card. The SIM card contains a computer chip that

keeps track of your phone number, the services

included in your subscription, and your Phonebook

information, among other things.

More information and downloads are available at

www.sonyericsson.com.

Available services

Some services and functions described in this user’s

guide are network or subscription-dependent, which

means that all menus may not be available in your

phone.

This symbol indicates that a service or

function is network or subscription-

dependent.

Note: Make sure that your information is saved to the

SIM card before you remove it from another phone.

For example, Phonebook entries may have been

saved in the phone memory and not the SIM. To copy

phonebook entries from phonebook to SIM, see page

see “Copy names and numbers” on page 30.

Please consult your network operator for

more information about your subscription.

Assembly

Before you can use your phone you need to:

Insert the SIM card.

•

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

SIM card and battery information

It may take up to 30 minutes before an icon

appears when charging.

1. Insert the SIM card. Slide the silver holder over the

SIM card to lock it in place.

2. Place the battery on the back of the phone with the

connectors facing each other.

3. Place the back cover as shown in the picture and

slide it into place.

4. Connect the charger to the phone at the flash symbol.

The flash symbol on the charger plug must face upward.

5. It may take up to 30 minutes before the battery charging

icon appears in the display.

6. Wait approximately 4 hours or until the icon indicates

that the battery is fully charged. If you do not see the

battery icon after this time, press any key or the

joystick to activate the display.

7. Remove the charger by tilting the plug upwards.

Note: You have to insert the SIM card and charge

the battery before you can use the phone.

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Turning the phone on

If you make a mistake while entering your PIN, delete

the wrong number by pressing

on/off

If your PIN starts with the same digits as an emergency

number, for example 911, the digits are not hidden with

an * when you enter them.

This is so that you can see and call an emergency

number without entering a PIN.

See “Making emergency calls” on page 25.

Note: If you enter the wrong PIN three times in a row,

the SIM card is blocked and the message PIN blocked

appears. To unblock it, you need to enter your PUK

(Personal Unblocking Key). Your PUK is provided by

your network operator.

To turn off the phone

Press and hold the on/off button at the top of the phone.

To turn on the phone

Press the on/off button on the top of the phone.

Enter your PIN (Personal Identity Number), if you

have one for your SIM card.

•

Your PIN is provided by your network operator.

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Navigating the menus

Example

The main menus are shown as icons on the desktop. To

go to the desktop, press the joystick or tilt it to the right.

To set an alarm

1. Use the joystick to scroll to Organizer, and press the

Press to go to

the desktop.

Move up,

Desktop

left

2. Use the joystick to scroll down to Alarms, and press

the left key to select this function. Press the left

key again to select Alarm.

key to select it.

down, left,

right through

menus.

Press to select

highlighted

items.

3. Enter the time and press the left

key to save

your entry.

Throughout this user’s guide instructions such as those

above will be given in a shorter form, as follows:

To set an alarm

1. Scroll to Organizer, Alarms, Alarm.

2. Enter the time, Save.

Press to go back one

level in the menus.

Press and hold to

return to standby.

Press to select the

options shown

above these keys

in the display.

To make and receive calls from standby

Enter the area code (if necessary) and phone number,

press Call.

•

Press End Call to end the call.

When the phone rings, press Yes to answer the call.

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Key functions

Press once to activate camera

Infrared port.

function. Press again to take a

picture.

Press and hold to switch

the phone on or off.

Volume keys increase/decrease

the earpiece volume during a

call. Scroll through menus, lists

and text. Enter the Status menu

in standby. Press twice to reject

an incoming call. Press once to

turn off the ring sound when

receiving a call. Hold for voice

dialing.

Press to go directly

to the Internet.

Move through the menus,

lists and texts.

Press down to select an item.

Delete numbers, letters or an

item from a list. Press and hold

to delete more than one

character at a time. Press and

hold to turn off the microphone

(during calls) or turn off sound.

Press to select the options

that appear in the display

immediately above these keys.

1-9, 0 Enter digits, 0-9, and letters.

Press once to go back one

level in the menus. Press and

hold to return to standby.

Press and hold

to enter

the international prefix +.

Enter # or a space.

Enter *. Shift between lower/

uppercase. Press and hold to

shift between text entry modes

(multitap or T9).

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Quick keys

Useful key combinations are described below.

To...

When in standby:

reach a phone number

at a specific position

press the position number

and

To...

When in standby:

speed dial

press any of the number

make an emergency call enter the emergency

number and press Call

keys

Call

and

enter Call Contact

press

enter the main menu

press

or press the

take a picture

once to activate

center of the joystick

camera and press again to

take a picture

enter the menu to see

today’s date, the profile

in use and the model

name of the phone

press a volume key once

voice dial

press and hold a volume

key or say your magic

word

change the language

to Automatic

press

8888

0000

enter Call List

press Calls

call your voicemail

enter the + sign

press and hold

change the language

to English

press

turn off the ringtone

when receiving a call

press

a volume key once

, or press

reject a call

press No

To...

During a call:

press Hold

set the phone to silent

press and hold

put a call on hold

retrieve a call

reach a contact beginning press and hold any of

with a specific letter the keys

press Retrieve

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

To...

During a call:

When entering letters

using multitap text input:

To...

turn off the microphone press and hold

enter a space

press

enter the main menu

press the joystick

delete letters and numbers press

To...

When in the menus:

shift between multitap or press and hold

T9 Text input methods

move through menus

or lists

press (and hold) a volume

key or use the joystick

shift between input

languages (including

character or numeric)

press and hold

delete an item

press

when in lists

go back to standby

press and hold

When entering letters

using T9 Text Input:

When entering letters

using multitap text input:

To...

view alternative words press or

reach the second letter

or character of a key

press and hold the

volume key and press

any of the number keys

accept a word and

add a space

press

enter a period

press

reach the third letter

or character of a key

press and hold the

volume key and press

any of the number keys

shift between capital

and lowercase letters

, then the letter

shift between capital

and lowercase letters

press

, then the letter

enter numbers

press and hold any

of the number keys

enter numbers

press and hold any

of the number keys

delete letters and numbers press

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

To edit an item

Select an item, press More, and choose from the list

When entering letters

using T9 Text Input:

To...

of options.

shift between multitap or press and hold

T9 Text input methods

Online services

shift between input

languages (including

character or numeric)

press and hold

Online services are customized services offered by

network operators, independently of mobile phones

and mobile phone manufacturers.

A SIM card which supports Online services works in

the same way as a normal SIM card. When you have

inserted your SIM card and turned on your phone, your

network operator can download data to your SIM card.

When you restart your phone after the first data

download, a new submenu appears under the menu.

Help texts

More information, explanations or tips about selected

menus or functions are available in your phone.

To get help

Select the menu or function and press Info.

To enter your new menu system

Delete and edit

•

Scroll to Connect, Online Services.

If you add items, for example, a contact, a note, an

appointment or a WAP bookmark, you can delete or

edit them.

Note: This menu only appears if your SIM card

supports this service. Some operators may not use

the name “Online Services”. Your phone may not

support all of the services offered.

To delete an item

Select an item and press

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Menu overview

Operator

direct link*

Internet

Services*

Instant

Messaging*

Camera

Messages

Entertainment

Pictures & Sounds

My Shortcuts*

Text

MMS**

Call Voicemail

Chat*

Games & More

Other Games

My Pictures

More Pictures

My Sounds

More Sounds

Themes

WAP Push

Area Info. *

Options

More Themes

Draw Picture

Music DJ

Record Sound

Phonebook

Calls

Connect

More***

Organizer

Settings

* Some menus are

operator, network and

subscription

dependent.

Call

Missed Calls

Calling Local *

Call List

Switch to Line 1 * WAP Options

Forward Calls

Manage Calls

Online Services* Main Menu

Calendar

Notes

Alarms

Sounds and Alerts

Display

Profiles

Manage SIM

Call Contact

Manage Contact

Pictures

Personal Rings

Voice Commands Time & Cost

Special Numbers Next Call

Bluetooth

Infrared Port

Add Call

Record

** The terms MMS and

Picture message are

used interchangeably

throughout this

Turn Off Tones Timer

Synchronization Release Party Stopwatch

GSM Networks

Data Comm.

Accessories

Language

Time and Date

Voice Control

Locks

Handsfree

My Shortcuts

Master Reset

Calculator

Code Memo

document.

*** Only available

during a call.

Advanced

Options

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

Entering letters

Multitap text input

You can enter letters, for example, when you add

names to the Phonebook, write text messages or

enter WAP addresses.

Apart from the way you normally enter letters in your

phone, using multitap text input, you can use T9™

Text Input for entering text messages and e-mail, for

example, if the input language you select supports this.

T9™ Text Input is a predictive input method and is

a quicker way to write texts. See “T9™ Text Input”

on page 14.

When saving names in the Phonebook or when writing

WAP addresses, you enter letters using multitap text

input. You press each key as many times as needed

to show the letter you want. In the following example,

we are going to write a name in the Phonebook.

To enter letters using multitap text input

1. Scroll to Phonebook, Manage Contact, Add Contact.

2. Press Add and then the appropriate key,

, repeatedly until

the character you want appears in the display.

See the table below:

Input languages

Before you start entering letters, you need to select

the input languages that you want to use when writing.

Press…

to get…

. , - ? !’ @ : ; / ( )1

A B C 2

To select input languages

1. Scroll to Settings, Language, Input.

D E F 3

2. Scroll to the language that you want to use for entering

letters and check each language you want.

3. Press Ok to exit the menu.

G H I 4

J K L 5

When writing, you can switch to one of your selected

input languages by pressing More and then selecting

Input Language. See “The list of options” on page 15.

M N O 6

P Q R S 7

T U V 8

W X Y Z 9

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

T9™ Text Input

Press…

to get…

You can use T9™Text Input when writing, for example,

text messages and email.

+ 0

Space ↵ ¶

The T9™ Text Input method uses a built-in dictionary

that recognizes the most commonly used word for each

sequence of key presses. This way, you press each key

only once, even if the letter you want is not the first

letter on the key.

for an options list

to delete letters and numbers

to shift between capital

and lowercase letters

press and hold to enter numbers

To shift from multitap to T9 text input method

Press and hold

Please note that different character sets are displayed

depending on the menu language that is selected.

To enter letters using T9™ Text Input

1. Scroll to Messages, Text, Write New.

2. For example, if you want to write the word “Jane”,

Example:

To enter an ‘A’, press

To enter a ‘B’, quickly press

To shift between capital and lowercase letters,

press , then enter the letter.

•

once.

press

3. If the word shown is the one you want:

Press to accept and add a space.

(To accept a word without adding a space, press .)

If the word shown is not the one you want:

Press or repeatedly to view alternative

words (candidates). Accept a word and add a

space by pressing

If you do not find the word you want by pressing

twice.

•

Tip: You can also use the volume keys as a shortcut

to certain letters:

To enter a ‘B’, press and hold the

and press

To enter a ‘C’, press and hold the

and press

•

volume key

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

•

Press More to go to a list of options.

Select Spell Word.

•

Spell Word – Change the suggested word by using

multitap text input.

Press and hold

to delete the entire word,

•

Text Format – Change style, size and alignment.

Input Language – Change input language.

Input Method – Change input method.

Word Suggestions – Select to show a list of

suggested words.

or delete one letter at a time by pressing

repeatedly.

Write the new word using multitap text input

and press Insert.

•

The word is added to the dictionary. The next

time you enter the word, it appears as one of

the alternative words.

•

My Words – A list of words you have added

to the dictionary.

Help.

4. Continue writing your message. See “Sending text

messages” on page 43. Press to enter a period.

To enter other punctuation marks, press

then or repeatedly. Accept by pressing

and

Press and hold

to select an input language.

The list of options

If you press More when writing a text message, you

enter a list of options. The list may contain some or

all of the following options:

•

Add Symbol – Symbols and punctuation marks such

as ? and , are shown. Move between the symbols by

using the joystick.

Insert Item – Pictures, melodies and sounds.

Getting to know your phone

This is the Internet version of the user's guide. © Print only for private use.

To send a theme

Personalizing your phone

You can exchange themes via IR, Bluetooth wireless

technology, MMS or email. For more information on

sending themes in messages, see “Messaging” on page

43. Please note that you are not allowed to exchange

You can adjust the phone settings to suit your own

requirements.

Note: If you change a setting which is included

in a profile, the active profile is also changed.

See “Profiles” on page 23.

1. Scroll to Pictures & Sounds, Themes.

2. Select a theme, press More.

3. Select Send.

Themes

4. Select a transfer method.

You can change the appearance of the display, for

example, the colors and background picture, by using

themes. Your phone comes with some pre-set themes

that you cannot delete. You can, however, create new

themes and download them to your phone.

To receive and save a theme

1. From standby, press More and select Turn on Bluetooth

or Turn on Infrared.

2. When you receive the theme, Incoming Item Continue?

appears. Press Yes or No.

For more information, visit www.sonyericsson.com.

Pictures

To download a theme

1. Scroll to Pictures & Sounds, More Themes.

2. Select a link.

Your phone comes with a number of pictures.

You can:

Download more pictures to your phone.

Have a picture as wallpaper when in standby mode.

•

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

•

Assign a picture to a contact in the Phonebook.

When that person calls, the picture appears in the display

(provided your subscription supports Calling Line

Identification). See “To add a picture to a phonebook

contact” on page 27.

To turn wallpaper on or off

Scroll to Settings, Display, Wallpaper, Activate.

To set a picture as wallpaper

1. Scroll to Pictures & Sounds, My Pictures.

2. Scroll to the picture you want to select.

3. Press More.

Insert a picture in a message.

All pictures are saved in My Pictures, in the

Pictures & Sounds menu.

To edit and save a picture

You can also save animations in your phone.

These are handled like pictures.

1. Scroll to Pictures & Sounds, My Pictures.

2. Scroll to the picture you want, press More.

3. Scroll to Edit. You can now start to edit the picture.

4. Press More, select Save Picture. The picture is saved

in My Pictures.

Handling pictures

You can add, edit, or delete pictures in My Pictures.

The number of pictures that can be saved depends on

the size of the pictures. File types supported are GIF,

JPEG and WBMP.

Note: To edit pictures taken with the camera,

you must select 120x160 as picture size.

The pictures are shown in thumbnail view. To get

a full view, press View.

To draw a picture

1. Scroll to Pictures & Sounds, Draw Picture.

2. Select a type.

To view your pictures

Scroll to Pictures & Sounds, My Pictures.

3. Select Tool and choose the tool you want to work with.

4. Press the center select key to activate the tool.

To download a picture

Scroll to Pictures & Sounds, More Pictures.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

When editing or drawing a picture:

Exchanging pictures

You can exchange pictures via IR, Bluetooth wireless

technology, MMS, or email. For more information

on sending pictures in messages, see “Messaging”

on page 43. Save the email address of a WAP album

in your Phonebook and you can save pictures in that

album if you send the pictures as attachments. Please

note that you are not allowed to exchange copyright-

protected material.

Press… to…

move the cursor up and left.

move the cursor up.

move the cursor up and right.

move the cursor left.

activate the current drawing tool.

move the cursor right.

To send a picture

move the cursor down and left.

move the cursor down.

1. Scroll to Pictures & Sounds, My Pictures.

Scroll to the picture you want, press More.

2. Select Send.

move the cursor down and right.

3. Select a transfer method.

view an options menu.

press and hold to exit the picture editor.

undo the last action.

select tool.

If you use infrared make sure that the infrared ports

are facing each other. On this Sony Ericsson phone,

the infrared port is located on the top of the phone

(for location, see “Key functions” on page 8).

select a color.

To receive and save a picture

1. From standby, press More and select Turn on Bluetooth

or Turn on Infrared.

2. When youreceive the picture, Incoming item

Continue?

appears. Press Yes or No.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

When you receive a picture in a text message or an

MMS, a new message appears in your Inbox. To

save the picture in My Pictures, highlight the picture

by moving the joystick to select it and press Save.

Ringtones and melodies

Your phone comes with a number of ringtones and

melodies. You can edit your own ringtones and send

them to a friend in a text message. It is also possible

to exchange melodies via WAP, Bluetooth wireless

technology, IR or cable. Please note that you are not

allowed to exchange copyright-protected material.

You can also download ringtones to your phone.

Screensaver

The phone has a screensaver, which is activated

automatically when the phone has been in idle mode

for a few seconds. After a few more seconds, the

screensaver changes to sleep mode to save power.

To turn the screensaver On or Off, scroll to Pictures

& Sounds, My Pictures, scroll to the picture you want

to select, and press More.

To select a ringtone

Scroll to Pictures & Sounds, My Sounds, scroll to

the sound you want to select, and press More.

Note: You can also scroll to Settings, Sounds and Alerts,

Note: You can also scroll to Settings, Display,

Screen Saver, Activate.

Ringtone.

To download a ringtone

1. Scroll to Pictures & Sounds, More Sounds.

2. Select a link.

To use a picture as the screensaver

You select a picture saved in the phone and use it

as the screensaver.

1. Scroll to Settings

Display

Screen Saver

Select Picture

To set the ringtone volume

2. Scroll to and select the picture you want to use as the 1. Scroll to Settings, Sounds and Alerts, Ring Volume.

screensaver.

2. Press

to decrease or increase the volume.

3. Press Yes to accept.

3. Press Save to save the setting.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

•

To turn the ringtone on or off, press and hold

from standby. All ringtones except the

alarm are turned off.

Receiving melodies

You can receive a sound or melody via IR, Bluetooth

wireless technology, text, MMS, or download it via

WAP. When you receive the sound or melody, press

Yes to save it in My Sounds.

To compose a ringtone or melody

1. Scroll to Pictures & Sounds, Music DJ.

Increasing ring

You can choose a ringtone that rises in steps from the

lowest volume to the highest.

2. Choose to insert a selection of pre-recorded music

blocks. You can choose from four different selections.

3. Copy and paste these blocks to build up your melody.

4. Select More to play the melody and view other options.

To turn increasing ring On

Scroll to Settings, Sounds and Alerts, Increasing Ring.

Note: To edit your own melody, scroll to Pictures &

Sounds, My Sounds, select the melody and press More.

Select Edit.

Specific ringtones for personal calls

If you subscribe to the Two Line Service,

you can set different ring tones for the two

voice lines. Line 1 and Line 2 are displayed

instead of Voice Calls.

To send a melody

1. Scroll to Pictures & Sounds, My Sounds.

2. Scroll to a melody, press More.

3. Select Send.

If your subscription includes the CLI, you can

assign a personal ringtone to up to ten callers.

Select a transfer method.

To set a specific ringtone for a caller

1. Scroll to Phonebook, Personal Rings, select an existing

contact to assign a personal ring or select New Contact.

2. Enter the first letters of the contact, press Ok.

3. Select a contact.

Note: To send a ringtone or melody in a text message,

see “To insert an item in a text message” on page 44.

4. Select a ringtone.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

Sounds and alerts

To change the menu language

1. Scroll to Settings, Language, Menu.

2. Select a language.

You can choose to be notified of an incoming call

by the buzzing of the vibrating alert. You can set

the phone’s vibrating alert to one of the following:

•

On – all the time.

Display light

On if silent – on when the ring volume is turned

off or when you have set the phone to silent.

Off – all the time.

The display light can be set to automatic or on. In

automatic mode, the display light is turned off a few

seconds after you last press a key.

•

To set the display light, scroll to Settings, Display, Light.

To set the display contrast, scroll to Settings, Display,

To set the vibrating alert

1. Scroll to Settings, Sounds and Alerts, Vibrating alert.

2. Select the setting you want.

Contrast.

Time settings

From the Settings, Sounds and Alerts menu, you can

also select Message alert, Key sound and turn on the

Minute minder.

If you turn on the minute minder, you hear a beep once

every minute during a call.

The time is always displayed in standby.

To set the time, scroll to Settings, Time and Date,

Set Time.

•

You can choose a 12-hour clock or a 24-hour clock.

Time and Date,

To set the time format, scroll to Settings

Menu language

Time Format.

Most SIM cards automatically set the menu language

to the language of the country where you bought your

SIM card. If this is not the case, the preset language

is English.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

Date

Start-up picture

When the phone is in standby mode, you can press

a volume key up or down to see today’s date in the

Status menu.You can set the date and date format in

the Settings, Time and Date menu.

When you turn your phone on or off, the Sony Ericsson

start-up picture appears in the display. Your operator’s

own picture or a picture selected by you may be shown

instead.

Advanced time settings

Under Advanced in the Settings,

Time and Date menu, you can set

To select a start-up picture

1. Scroll to Settings, Display, Start-Up Picture.

2. Select My Picture.

time zone and daylight savings time.

By changing these you also change the time.

When your phone changes networks, and the time

sent out from the operator deviates from the time in

your phone, you are asked whether you want to update

the time if you have turned on Auto Time Zone. If you

press Yes, the time is updated automatically.

My phone numbers

You can check your own phone number(s).

To check your phone number, scroll to Phonebook,

Special Numbers, My Numbers. If your number is

not saved on your SIM card, you can enter it yourself.

•

Keypad lock

Answering mode

You can lock the keypad to avoid dialing a number

by accident.

When using a portable handsfree kit, you can choose

to answer a call by pressing any key (except the No key)

or set the phone to answer the call automatically.

Note: Calls to the emergency number 911 can

still be made, even when the keypad is locked.

•

To select answering mode, scroll to Settings

Handsfree

Answering Mode.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

Automatic keylock

From standby, automatic keylock means the keypad 1. Scroll to Settings, Profiles, Edit Profile.

is locked a short while after you last press a key. To 2. Select a setting.

turn on Automatic Keylock, scroll to Settings, Locks. 3. Change the profile settings.

To change a profile setting

Auto Keylock, On.

To lock the keypad manually, press More in standby,

and select *Lock Keys.

•

To rename a profile, scroll to Settings, Profiles,

Edit Profile, Profile Name.

•

You can reset all profile settings to the way they were

set when you bought your phone.

To reset all profiles, scroll to Settings, Profiles,

Reset Profiles.

You can still answer an incoming call and the keypad

locks again after it. The keypad remains locked until

you unlock it manually.

•

To unlock the keypad, press Unlock and then

Automatic activation

Profiles

Some profiles, for example In Car, are automatically

activated when used with a specific accessory.

When disconnected, the profile is changed back.

Your phone has a number of preset profiles which

are set to suit a certain environment. You can rename,

change and add accessories to these profiles. For

example, when you go to a meeting, you can simply

choose the Meeting profile and a number of settings,

such as the ringtone, is turned off.

•

To select a profile, scroll to Settings, Profiles,

Select profile.

Personalizing your phone

This is the Internet version of the user's guide. © Print only for private use.

Master reset

If Reset Settings is selected, some settings in the phone

will be lost.

If you also want to delete all contacts, messages and

other personal data, such as games, music etc. select

Reset All instead.

Calling

Before you can make or receive any calls, you must

turn on the phone and be within range of a network.

See “Turning the phone on” on page 6.

Making calls

Note: If you select Reset All, content such as melodies 1. Enter the area code (if necessary) and the phone number.

and pictures that you have downloaded, received or

edited is also deleted.

2. Press Call to make the call.

3. Press End Call to end the call.

To reset the phone

To change the earpiece volume during a call

Use the volume keys on the side of the phone to

increase or decrease the earpiece volume during

a call.

1. Scroll to Settings, Master Reset.

2. Select Reset Settings or Reset All.

Enter the phonelock code (0000 or the new

code if you have changed it) and press Ok.

To turn off the microphone during a call

1. Press

until the display shows Muted.

2. Press

again to resume the conversation.

Automatic redialing

If the connection of the call failed and the display

shows Retry?, press Yes. The phone redials the

number (up to ten times):

•

Until the call is connected.

Until you press a key or receive a call.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Note: Do not hold the phone to your ear while

waiting. When the call is connected, the phone

gives out a loud signal.

Automatic redialing is not available for fax and

data calls.

In some countries, other emergency numbers may also

be promoted. Your operator may therefore have saved

additional local emergency numbers on the SIM card.

To view your local emergency numbers, scroll to

Phonebook, Special Numbers, Emergency Numbers.

•

Making international calls

Receiving calls

1. Press and hold

the display.

until a + sign appears in

When you receive a call, the phone rings and the display

shows Answer?

The + replaces the international prefix number

of the country from which you are calling.

2. Enter the country code, area code (without the

leading zero) and phone number, press Call.

If your subscription includes the Calling Line

Identification service and the caller’s number is

identified, the number is displayed. If you have saved

the number in the Phonebook, the name and number

are displayed. If you have assigned a picture to a contact

the picture is displayed. If the number is a restricted

Making emergency calls

•

Enter your emergency number and press Call.

Your phone supports the international emergency

numbers, 112, 911 and 08. This means that these

numbers can normally be used to make an emergency

call in any country, with or without a SIM card inserted,

if a GSM network is within range.

number, the display shows Withheld.

To answer a call

Press Yes.

To reject a call

Press No.

Note: Some network operators may require that a SIM

card is inserted, and in some cases that the PIN has

been entered as well.

Tip: You can also use your voice to answer or reject

calls. See “Voice control” on page 31.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Missed calls

Call priority service

If you have missed a call, Missed Calls:1 appears

in standby, indicating the number of missed calls.

You can request a certain priority when you

make a call, if your subscription supports the

call priority service.

To check your missed calls

1. Press Yes to display the missed calls.

2. To call a number from the list, scroll to the number,

press Call.

The priority levels are defined by your operator and

are normally within the range of 0 - 4, where 0 is the

highest priority.

To check or change your standard priority level

1. Scroll to Calls, Manage Calls, Default Priority.

Call list

The numbers of the last 30 calls that you have made 2. The network sends available priority levels.

are saved in the call list. If your subscription includes 3. Select a priority level.

the CLI service and the caller’s number is identified,

you will also find the numbers of answered and missed

calls in the call list.

To change the priority for one call

1. Enter the phone number you want to call.

2. Scroll to Calls, Next Call, Next Incoming Call.

3. Select a priority. The number is called.

To call a number from the call list

1. To enter the call list, press Calls from standby.

2. Scroll to the number you want to call, press Call.

Phonebook

In the Phonebook you can store the information on

your SIM card and on your phone. You have space

for up to 510 numbers. You can save all the information

needed to contact people. You can also set how much

information you want to show for your contacts.

•

To clear the call list, scroll to Calls, Options, Clear

Call List.

To turn the call list on or off, scroll to Calls, Options,

Call Listing.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Entries saved are stored in your phone’s memory, not

on your SIM card. To synchronize your phone-based

contact list with your PDA or PC, see “Synchronization”

Pictures, personal rings and voice commands

You can add a picture, personal ringtone and voice

command to a contact.

on page 68

To add a picture to a phonebook contact

1. Scroll to Phonebook, Pictures.

2. Enter the first letters of the contact, press Ok.

3. Select a contact.

To set the fields in contact information

1. Scroll to Phonebook, Options, Contact Info.

2. Press Check/Uncheck to select or clear fields.

If your Phonebook is empty, you are prompted to copy 4. This takes you to My Pictures. Select a picture,

information from your SIM card. If you press No, you

can add new contacts. If you press Yes, your names

and numbers are copied from your SIM.

press Yes.

•

Select Personal Rings to add a personal ringtone.

Select Voice Commands to add a voice command.

To add a contact

1. Scroll to Phonebook, Add Contact.

2. Scroll to the field you want to fill in, press Add.

3. Enter the information, press Ok.

To call a contact from your contact list

1. From standby, press and hold one of the number

keys 2-9 to find a contact beginning with the first

letter on that key (or closest following).

4. Select the next field and so on.

5. When you have entered the information, press Save.

•

For example, press and hold 5 to go to the first

contact beginning with “J”. To go to a contact

beginning with “L” press 5 three times after you

have entered the list of contacts.

Tip: To enter an unsaved number, press Look Up

when you are in a number field, and select a number

in the unsaved numbers list.

2. When the contact you want to call is highlighted,

press Select.

3. Select the number you want to call, press Call.

Calling

This is the Internet version of the user's guide. © Print only for private use.

To call a contact from your SIM card

1. Scroll to Phonebook, Call.

2. Enter the first letters of the contact, press Ok.

3. Scroll to the name, press Call.

To delete all contacts

To delete all contacts, scroll to Phonebook, Advanced,

Delete All.

Note: Contacts that are saved on the SIM card are

not deleted.

Updating the phonebook

When needed, you can easily update or delete any

contact information.

Default (standard) number

Each contact has a default phone number. The first

phone number you link to a contact automatically

becomes the default number. If you scroll to a certain

contact in the Call Contact list and then press Select,

the default number is highlighted.

To edit a contact

1. Scroll to Phonebook, Manage Contact, Edit Contact.

2. Enter the first letters of the contact, press Ok.

3. When the contact is highlighted, press Edit.

4. Select Edit Info.

5. Scroll to the field you want to fill in, press Edit.

6. Enter the information, press Ok.

7. Select the next field and so on.

To set the default number

1. Scroll to Phonebook, Manage Contact, Edit Contact.

2. Enter the first letters of the contact, press Ok.

8. When you have entered the information, press Save. 3. Select the contact, press Edit.

4. Select Default Number. Highlight the number you want

as default, press Select.

To delete a contact

Scroll to Phonebook, Manage Contact, Delete

contact. Then select the contact and press Delete.

Groups

You can create a group of contacts. By doing so, you

can send text messages to several recipients at the same

time. See “Sending text messages” on page 43.

Tip: You can also delete a contact by pressing

when the contact is highlighted.

Calling

This is the Internet version of the user's guide. © Print only for private use.

To create a group of contacts

1. Scroll to Phonebook, Manage Contact, Groups,

New Group, press Add.

2. Enter a name for the group, press Ok.

3. Select New Member, press Add.

4. Enter the first letters of the contact, press Ok.

5. Select the contact.

When you receive a business card via a text message,

you accept the card by pressing Yes. To be able to

receive a business card using the infrared port or

Bluetooth wireless technology, you need to turn these

functions on.

To receive a business card

6. Select a phone number.

7. Repeat steps 3-6 to add more members.

1. From standby, press More and scroll to

Turn on Bluetooth or Turn on Infrared.

2. When you receive the business card, press Yes.

Business cards

You can add your own business card to the

Phonebook.

To send a contact

1. Scroll to Phonebook, Manage Contact, Send Contact.

•

To add your own business card, scroll to Phonebook, 2. Enter the first letters of the contact you want to send,

Manage Contact, My Card. Then select Add.

press Ok.

3. Scroll to the contact you want to send, press Send.

4. Select transfer method.

Exchanging business cards

You can exchange business cards between your

phone and another similar phone, a PDA or a PC,

using Bluetooth wireless technology, the infrared

port, text or MMS.

To send all contacts

Scroll to Phonebook, Advanced, Send All and select

a transfer method. You can send your contact via

Bluetooth or via infrared.

To send your business card

1. Scroll to Phonebook, Manage Contact, My Card, Send.

2. Select a transfer method.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Copy names and numbers

Speed dialing

You can copy the names and numbers between your

phone’s memory and the SIM card. The number of

phone numbers that can be saved depends on the type

of SIM card.

You can save the phone numbers that you want to reach

easily in positions 1-9 on your SIM card.

To call any of these phone numbers from

standby

To copy names and numbers to the SIM card

Scroll to Phonebook, Advanced, Copy to SIM.

Enter the position number and press Call.

To change position numbers

Note: Everything on the SIM card is replaced.

1. Scroll to Phonebook, Advanced, Position List.

2. Select the phone number you wish to change.

If you insert a SIM card with saved numbers in your 3. Select the position to which you want to move

phone, you can call a number by selecting Phonebook, the phone number.

Advanced, Call from SIM. If you want to edit a name 4. Repeat steps 2 and 3 to continue to move

and number saved on the SIM card, you first need to

copy the name and number to the phone.

phone numbers.

5. When you have finished, press

To copy names and numbers to the phone

Scroll to Phonebook, Advanced, Copy From SIM.

Checking the memory

With the Memory status function in your Phonebook,

you can check how many positions you have left in

your memory for the phone, SIM, email and voice

commands.

Tip: When you have selected a name on the SIM card

in the Call from SIM menu, you can copy it to the phone

by pressing More and then selecting Copy to phone.

To check the memory

Scroll to Phonebook, Advanced, Memory Status.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Voice control

To turn voice dialing on and record

number types

With your phone, you can use your voice to:

Voice dial – call someone by saying the name and

number type.

Redial the last dialed number.

Answer and reject calls when using a handsfree kit.

Change profile.

•

1. Scroll to Settings, Voice Control, Voice Dialing.

2. Select On. Now you are going to record a voice

command for each number type you use with your

Phonebook contacts, for example, “home” or “mobile”.

3. Instructions appear. Press Ok.

•

Record or listen to sound recordings by using

voice commands.

4. Select a number type.

5. Lift the phone to your ear, wait for the tone and say the

command that you want to record. The voice command

is played back to you.

6. If the recording sounds OK, press Yes to save the voice

command. If not, press No and repeat step 4.

7. Repeat steps 4 and 5 for each voice command you need.

•

Activate the voice control by saying a “magic word”.

You can save approximately 50 recorded words as

voice commands in the 40 seconds available. This

also depends on what is saved in the memory with

other functions. When recording, make sure you are

in a quiet environment.

You also need to record voice commands for each

contact name, for example, “John”.

Before voice dialing

You must first turn on the voice dialing function and

record your voice commands.

To record a voice command for a contact name

1. Scroll to Settings, Voice Control, Voice Dialing,

Edit Names, Add Voice Tag.

2. Select a contact.

3. Follow the instructions in the display.

An icon appears next to a contact name that has a voice

command.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Caller name

Redialing

You can choose whether you want to hear the recorded

contact name when you receive an incoming call from

that contact.

You can use your voice to redial the last dialed number,

if you record a voice command for redialing.

•

To turn the caller name On or Off, scroll to Settings,

Voice Control, Caller Name.

To turn on and record a redial command

1. Scroll to Settings, Voice Control, Voice redial.

2. Select On.

Voice dialing

3. Instructions appear. Press Ok.

4. Lift the phone to your ear, wait for the tone and say

“Redial”, or another word. If the recording sounds

OK, press Yes. If not, press No and repeat step 4.

To make a call with Voice dialing

1. From standby, press and hold a volume key for

one second.

2. Lift the phone to your ear, wait for the tone and say

a name, for example “John”. The name is played back

to you.

3. If you have several numbers for that contact, after a

second tone, say the number type, for example, “home”.

The number type is played back to you, and the call

is connected.

To redial using a voice command

1. From standby, press and hold a volume key

for one second.

2. Wait for the tone and say “Redial”. The voice

command is played back to you and the last

dialed number is called.

From standby, you can also initiate voice dialing, voice

profiles and voice control of sound recordings by:

Voice answering

You can answer or reject incoming calls by using

your voice, when using a portable handsfree or a

car handsfree kit.

•

Pressing and holding a volume key.

Pressing the handsfree button (when using

a portable handsfree or a Bluetooth headset).

Saying the magic word. See “Magic word” on

page 33.

•

Calling

This is the Internet version of the user's guide. © Print only for private use.

To turn on voice answering and record voice

answer commands

1. Scroll to Settings, Voice Control, Voice Answer.

2. Select On.

3. Select the accessories you want to be able to use with

voice answering by pressing Check and then Save.

4. Instructions appear. Press Ok.

Magic word

You can record a magic word and use it as a voice

command to allow total handsfree access to voice

control. Instead of pressing a volume key, you say

the magic word and then one of your recorded voice

commands. The magic word is especially suitable

when using a car handsfree kit.

5. Lift the phone to your ear, wait for the tone and say

“Answer”, or another word. If the recording sounds

OK, press Yes. If not, press No and repeat step 5.

6. Say “Busy”, or another word. Press Ok.

Tip: Choose a long, unusual word or phrase

which can easily be distinguished from ordinary

background speech.

To answer a call using voice commands

When the phone rings, say “Answer”. The call

is connected.

To turn on and record the magic word

1. Scroll to Settings, Voice Control, Magic Word.

2. Select On.

3. Select the accessories you want to be able to use

with the magic word by pressing Check and then

Save.

To reject a call using voice commands

When the phone rings, say “Busy”.

The call is rejected. The caller is forwarded to

voicemail, if turned on, or hears a busy tone.

4. Instructions appear. Press Ok.

5. Lift the phone to your ear, wait for the tone and

say the magic word.

Tip: Turn off the magic word when you no longer need

total handsfree access in order to save battery power.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Note: The magic word is not compatible with the

Bluetooth handsfree accessory.

Sound recordings

Instead of using the menus, you can record voice

commands to start or to listen to a recording.

Changing profiles

If you record voice commands for your profiles,

you can change profile with your voice.

To turn on and record recording commands

1. Scroll to Settings, Voice Control, Sound Recorder.

2. Select On.

To turn on and record profile commands

1. Scroll to Settings, Voice Control, Voice Profiles.

2. Select On.

3. Instructions appear. Press Ok.

4. Lift the phone to your ear, wait for the tone and say

“Record”, then press Yes.

3. Instructions appear. Press Ok.

5. Say “Play”, press Yes.

4. Select a profile.

5. Lift the phone to your ear, wait for the tone and say

the profile name. Repeat steps 4 and 5 to record voice

commands for the other profiles.

To start a recording using a voice command

1. From standby, press and hold a volume key for

one second.

2. Lift the phone to your ear, wait for the tone and say

“Record”. The voice command is played back to you

and a tone indicates that the recording has begun.

3. To end the recording, press Stop.

To change a profile using voice commands

1. From standby, press and hold a volume key for

one second.

2. Lift the phone to your ear, wait for the tone and say the

profile command for the required profile. The profile

command is played back to you and the current profile

is changed.

To listen to recordings using a voice command

1. From standby, press and hold a volume key for

one second.

2. Lift the phone to your ear, wait for the tone and say

“Play”. The voice command is played back to you.

3. Listen to your recordings. Press Stop to stop.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Editing your voice commands

•

You spoke too late or too soon – speak immediately

after the tone.

You can keep all your voice commands up to date by

re-recording them or deleting the ones you do not use.

See the following example:

You did not record the voice command when the

handsfree was attached – for voice control with a

handsfree kit, record when the handsfree is attached.

You used another intonation – use the same intonation

as you did when recording the voice command.

To re-record a voice command

1. Scroll to Settings, Voice Control, Voice Profiles,

Edit Contact.

•

2. Select a voice command.

Voicemail

3. Select Replace Voice.

To listen to a recorded voice command, select

Play Voice.

Callers can leave a voicemail message

when you cannot answer a call.

4. Lift the phone to your ear, wait for the tone and say

the command.

You can also edit the voice command for a contact

name in Edit Contact in the Phonebook menu.

Receiving a voicemail message

Depending on your network operator, you are informed

that someone has left a message by a text message or

by a voicemail indication. Press Yes to listen to the

message.

Tips when recording and using voice commands

If your phone cannot detect speech, one of the

following might have happened:

Calling your voicemail service

You can easily call your voicemail service by pressing

•

You spoke too softly – try speaking more loudly.

You held the phone too far away – hold it as you

do during a call.

and holding

, if you have saved your voicemail

number in the phone. You get the number from your

service provider.

•

The voice command was too short – it should be around

one second long and more than one syllable.

•

To enter the number, scroll to Messages, Options,

Voicemail Number.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Call time and cost

To enter the price per call unit

During a call, the duration of the

call is shown in the display. If you

subscribe to cost information, the call cost

(or the number of call units) is displayed.

1. Scroll to Calls, Time & Cost, Call Costs, Set Tariff.

2. Enter your PIN2, press Ok.

3. Select Change, press Ok.

4. Enter the code for the currency you want,

5. (for example USD for United States Dollars), press Ok.

6. Enter the price per call unit, press Ok.

You can check the duration of your last call,

outgoing calls and the total time.

To enter a decimal point, press

•

To check the call time, scroll to Calls, Time and Date,

Call Timers and select an option. To reset the call time

meter, select Reset Timers.

Credit limit for calls

You can enter a total amount of money

that can be used for making calls. When the

amount reaches zero, no more calls can be

made. Please note that the credit limit is only

an estimated value.

You can check the cost of your last call and the total

cost of your calls.

To check the call cost, scroll to Calls, Time & Cost,

Call Costs and select an option. To reset the call timer,

select Clear Total Cost.

To set a credit limit

1. Scroll to Calls, Time & Cost, Call Costs, Set Credit.

2. Enter your PIN2, press Ok.

3. Select Change, press Ok.

Note: If you subscribe to cost information, you must

enter your PIN2 to clear the cost or time counter.

4. Enter an amount, press Ok.

Setting the call cost

Forwarding calls

You can use the Tariff function to specify the price per

call unit. If you do not specify a price per call unit, the

number of call units appears.

If you cannot answer incoming voice, fax or

data calls, you can forward them to another

number, for example your home or office.

Calling

This is the Internet version of the user's guide. © Print only for private use.

For voice calls, you can choose between the

following call forwarding alternatives:

To check status

1. Scroll to Calls, Forward Calls. Select a call type.

Scroll to the forward you want to check. Select

Get Status.

2. To check the status of all call forwards, select

Check All in the Forward Calls menu.

•

Forward Always – forward all voice calls.

When Busy – forward calls if you are already

on the phone.

•

Not Reachable – forward calls if your phone

is turned off or if you are unreachable.

No Reply – forward calls that you do not answer

within a specified time limit (operator-dependent).

More than one call

You can handle more than one call

simultaneously. For example, you can put

an ongoing call on hold while you make or

answer a second call, and then switch between

the two calls.

Note: When the Restrict Calls function is on,

some Forward Calls options cannot be activated.

To turn on Call forward

1. Scroll to Calls, Forward Calls.

2. Select a call category and then a forward alternative.

3. Select Activate.

4. Enter the phone number to which you want your calls

to be forwarded and press Ok, or retrieve it from the

Phonebook.

Call waiting service

If the call waiting service is on, you hear a beep in

the earpiece if you receive a second call during an

ongoing call.

To turn the call waiting service on or off, scroll to Calls,

Manage Calls, Call Waiting.

•

To turn off call forward, select a forward option and

select Cancel.

To make a second call

1. Press Hold to put the ongoing call on hold.

2. Enter the number you want to call and press Call,

or retrieve a number from the Phonebook.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Note: You can only put one call on hold.

Conference calls

In a conference call, you can have a joint

conversation with up to five other people.

You can also put a conference on hold and

make another call.

Receiving a second call

To answer the second call and put the ongoing call

on hold, select Answer?

To reject the second call and continue the ongoing

call, select Busy.

Select Release&Answer to answer the second call

and to end the ongoing call.

•

Note: There may be additional charges for calls

involving multiple parties. Contact your service

provider for more information.

Creating a conference call

Handling two calls

To create a conference call, you must first have one

ongoing call and one call on hold.

When you have one ongoing call and one call on hold,

you can do the following:

•

Select Switch Calls to switch between the two calls.

Press the joystick, then select Join Calls to join the

two calls into a conference call.

To join the two calls into a conference call

Press the joystick and select Join Calls, press Yes.

•

Press the joystick, then select Transfer Call, to connect

the two calls. You are disconnected from both calls.

Press End Call to end the ongoing call, then press Yes

to retrieve the held call.

To add a new participant

1. Press 2 then the left selection key to put the

conference call on hold.

2. Call the next person you wish to include in

the conference call.

Press End Call twice to end both calls.

3. Press the joystick and select Join Calls.

Repeat steps 1 to 3 to include more participants.

Note: You cannot answer a third call without ending

one of the first two calls.

Calling

This is the Internet version of the user's guide. © Print only for private use.

To release a participant

1. Press the joystick and select Release Party.

2. Select the participant.

You can change the names of the lines, and have

different settings for each line, for example, different

ringtones.

•

To change the name of a line, scroll to Settings,

Display, Edit Line Tags.

To end the conference call

Press End Call.

Calling card calls

Having a private conversation

You can have a private conversation with one of the

participants and put the other participants on hold.

Press the joystick, then select Extract Part to select

the participant that you want to talk with.

Select Join Calls to resume the conference call.

You can use the calling card service to

redirect the cost of a call to a credit card or

a calling card account, instead of your normal

account. This may be useful, for example,

when making international long distance calls.

You can save two separate calling card numbers.

The numbers and the codes associated with them

are protected by the code.

•

Two voice lines

Your phone may have two voice lines with

different phone numbers. This may be useful

if, for example, you want to keep business

and private calls on separate lines.

Before making a calling card call, you need to select

and activate a card.

Note: You cannot use the calling card service for

fax and data calls.

•

To select a line, scroll to Calls, Switch to Line 1.

To turn the calling card service on or off

1. Scroll to Calls, Time & Cost, Calling Cards,

Use Calling Cards.

2. Enter your phonelock code, press Ok.

3. Select On or Off.

All outgoing calls are made on this line until you

change it. Incoming calls can still be received on

either line.

Calling

This is the Internet version of the user's guide. © Print only for private use.

To save a card number

3. Press Yes when the display shows Send called number?,

1. Scroll to Calls, Time & Cost, Calling Cards, My Cards.

2. Enter your phonelock code, press Ok.

3. Select New Card.

or wait a few seconds and the number and code are

sent automatically.

Enter the card settings (the access number and name of

the calling card server, and the verification code). You

get this information from your card provider. Select

which you want to send first – the number that you

want to call, or the verification code.

Fixed dialing

The fixed dialing function allows calls to be

made only to certain numbers saved on the

SIM card. Fixed dialing requires a SIM card

that allows fixed numbers to be saved. The

fixed numbers are protected by your PIN2.

To select a card

1. Scroll to Calls, Time & Cost, Calling Cards, My Cards.

2. Enter your phonelock code, press Ok.

3. Select a card.

Note: Contact your network operator to set the fixed

dialing function to on. Calls to the emergency number

911 can still be made, even when the fixed dialing

function is on.

4. Select Activate Card.

To make a calling card call

•

Partial numbers can be saved. For example, saving

0123456 allows calls to be made to all numbers starting

with 0123456.

Numbers with question marks can be saved. For

example, saving 01234567?0, allows calls to be

made to numbers from 0123456700 to 0123456790.

1. Enter the phone number of the person you want to call

or retrieve the number from the Phonebook.

2. Press More, select Call via call. card

The access number of the calling card server is dialed.

During the connecting phase, you are asked to send

the phone number you want to call and the verification

code.

To enter a question mark, press and hold

Calling

This is the Internet version of the user's guide. © Print only for private use.

To turn fixed dialing on or off

1. Scroll to Phonebook, Options, Fixed Dialing.

2. Enter your PIN2, press Ok.

To activate a group

1. Scroll to Calls, Manage Calls, Closed Groups,

Edit List.

3. Select On or Off.

2. Select a group.

3. Select Activate.

Calls can only be made within the selected group.

•

To save a fixed number, scroll to Phonebook, Special

Numbers, Fixed Numbers. Select New Number and

enter the information.

•

To call outside a Closed User Group, select Calls,

Manage Calls, Closed Groups, Open Calls and

then select On.

Closed user groups

The Closed User Group function is a way of lowering

call costs. On some networks it is cheaper to make

calls within a call group. You can save ten groups.

Accept calls

With the accept calls service, you can choose to

receive calls only from certain numbers. Other calls

are automatically rejected by a busy tone. The phone

numbers of calls you have rejected are saved in the

Call List.

To add a group

1. Scroll to Calls, Manage Calls, Closed Groups,

Edit List.

2. Scroll to New Group, press Add.

3. Enter the name of the user group, press Ok.

4. Enter the index number, press Ok.

You get the index number from your operator.

To add numbers to the accepted callers list

1. Scroll to Calls, Manage Calls, Accept Calls,

Accepted List.

2. Scroll to New, press Add.This takes you to the

Phonebook or Groups.

3. Select an entry.

•

To select an accept option, scroll to Calls,

Manage Calls, Accept Calls, Accept Options.

Calling

This is the Internet version of the user's guide. © Print only for private use.

Networks

Notepad

When you turn on the phone, it automatically

selects your home network if this is within

range. If it is not within range, you may use

another network, provided your network operator

has an agreement that allows you to do so. This is

called roaming.

You can select the network you want to use, or you can

add a network to your list of preferred networks. You

can also change the order in which networks are selected

during an automatic search. For all such options, scroll

to Connect, GSM Networks.

You can use the phone to make a note of a phone

number during a call. When you press the number

keys, the person you are talking to hears tone signals.

To turn these tone signals off during the call, press

the joystick and select Turn Off Tones. When you

end the call, the number remains in the display. You

can then call the number by pressing Call.

Showing or hiding your number

If your subscription supports the Calling

Line Identification Restriction (CLIR)

service, you can hide your phone number

when making a call.

Tone signals

You can use telephone banking services or

control an answering machine by sending

tone signals (also known as DTMF tones

or touch tones) during a call.

To show or hide your phone number

1. Enter the phone number you want to call.

2. Press More and select Call and Hide ID

or Call and Show ID.

•

To send the tones, press the number keys 0-9,

•

To clear the display after the call is finished, press

Calling

This is the Internet version of the user's guide. © Print only for private use.

Sending text messages

For information about entering letters,

see “Entering letters” on page 13.

Messaging

Your phone supports various messaging services.

Please contact your service provider for details of

which services you can use. For more information

about text, see “Entering letters” on page 13.

To write and send a text message

1. Scroll to Messages, Text, Write New.

2. Write your message, press Continue and the following

options appear:

Text messaging

Text messages can be sent to one person, several

recipients or to a group of recipients that you have

saved in the Phonebook. See “Groups” on page 28.

Text messages can also contain pictures, animations,

melodies and sounds.

•

Contacts – send the message to a phonebook entry.

Phone Number – send the message to a phone

number.

•

SIM Entries – send the message to an entry on

your SIM card.

Unsaved Numbers – send the message to a number

in your unsaved list.

Before you start

First make sure that the number of your service center

is set. The number is supplied by your service provider

and is usually saved on the SIM card.

3. Enter a recipient’s phone number or press Look Up

to retrieve contact information.

4. Press Send.

To set the service center number

1. Scroll to Messages, Text, Options, Service Centers.

If the service center number is saved on the SIM card,

it appears in the display.

Note: If you send a text message to a group,

you are charged for each member of that group.

2. If there is no number in the list, select New Number,

press Add.

3. Enter the number, including the international “+” sign

and country code, press Ok.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

To insert an item in a text message

1. Scroll to Messages, Text, Write New.

2. While writing your message press More.

3. Select Insert Item.

4. Select the type of item (MMS, Sound Effect, Melody,

Animation or Picture (other)).

While reading the text message you can, for example,

start a chat session with the sender or go to a WAP

address found in the text message.

When you have read the text message, press More

to view a list of options.

•

Press

to close the text message.

5. Select an item, press Yes.

Calling a number in a text message

You can call a phone number that appears in

a text message.

Text formatting

You can change the style, size and alignment of the

text, and create new paragraphs, in a text message.

•

Select the phone number, press Call.

To format the text in a text message

1. Scroll to Messages, Text, Write New.

2. Write the text message. Press More.

3. Select Text Format. Then select Text Style,

Text Size, Alignment or New Paragraph.

4. Select a text format, press Ok.

Saving incoming text messages

Incoming text messages are saved in the phone memory

When the phone memory is full, you must delete

messages or move them to the SIM card to be able

to receive new messages.

To save an item from a text message

Receiving text messages

When the phone number, WAP address or picture,

is highlighted, press More. Then select Save.

When you receive a text message, the phone beeps

and the message Read now? appears in the display.

Press Yes to read the text message, or press No if you

want to read the message later. You may not receive

all parts of a long message at the same time.

•

A picture is saved in My Pictures.

A phone number is saved in Phonebook.

A WAP address is saved in Bookmarks.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Long messages

Message options

A text message can contain up to 160 characters.

You can send a longer message by linking two or

more messages. Please note that you are charged

for each message within a linked message.

To turn long messages on, select Long Messages from

the Messages, Text, Options menu, then select On.

You can set a default value for the message

options below, or you can turn on the Set on

send option which means that you choose

the settings each time you send a message.

SMS Type – The phone supports different types

of messages. Your service provider may offer the

facility of converting a text message into a format

(email or fax, for example) that suits the equipment

that is going to receive the message.

Validity Period – If your message cannot be delivered,

for example, if the recipient has turned off the phone,

your service center can save the message to send it

later.

•

Templates

If you have one or more messages that you send often,

you can save these as templates. There are five pre-

defined templates in your phone, but you can also create

your own.

To create a template

1. Scroll to Messages, Text, Templates, New Template,

press Add.

•

Request Reply – Include a reply request if you want

the recipient of your message to reply.

Status Request – Check if a message has been delivered.

•

2. Write the message, press Ok.

3. Press Yes if you want to send the message now.

Press No to save the template.

To set a default message option

1. Scroll to Messages, Text, Options.

2. Select an option.

To turn set on send on or off

Repeat steps 1 and 2 above, then select Set on Send.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

To check the status of a sent message

Scroll to Messages, Text, Sent Items, select a text

message, press More, View Status.

To compose and send an MMS

1. Scroll to Messages, MMS, Create New.

The following options appear:

•

MMS – From My Pictures.

Text – Write a message.

Sound – From My Sounds.

Camera Picture – From the Camera.

Recording – Add a sound recording.

Page – Start a new page.

Picture messaging

Picture messages can contain text, pictures and sounds

and are sent via MMS (Multimedia Messaging Service).

You must have a subscription that supports MMS.

Picture messages can be sent to a mobile phone or an

email account. You can also send contacts, calendar 2. Select an option.

entries and notes as attachments. Please note that you 3. Press Add to continue composing the message.

are not allowed to exchange copyright-protected

material.

4. Press More for the following options:

•

Send – Send the message.

Preview – View the message before sending.

Preview Page – View the page in the message.

Page Timing – Set the duration in seconds that

the page will be shown on the recipient’s display.

Background – Set the background color.

Delete Page – Remove a page.

Before you start

Before sending an MMS, make sure that:

The number to your service center is set. To set the

message server address, scroll to Messages, MMS,

Options, Message Server.

•

You have entered the WAP settings. Scroll to Messages

MMS, Options, WAP Profile and select Select or Create

New. To create a WAP profile, see “Setting up WAP

and email” on page 55. Your operator can automatically

download all the settings you need.

5. Select Send. The following options appear:

•

Contacts – send the message to a phonebook entry.

Phone Number – send the message to a phone

number.

•

Email Address – send the message to an email

address.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

•

SIM Entries – send the message to an entry on your

SIM card.

•

Attachments: – Add your own card, a business card

or a melody from My Sounds.

•

Groups – send the message to a group of contacts.

Unsaved Numbers– send the message to a number

in your unsaved numbers list.

•

Priority: – High, normal, low.

Delivery Report: – Turn on or off.

Read Report: – Turn on or off.

6. Enter a recipient’s phone number or press Look Up

to retrieve contact information.

7. Press Send.

Tip: You can base your message on one of the

pre-defined templates.

Note: If you entered the number manually,

press Proceed to go to “Advanced send options”.

To use a pre-defined template for an MMS

1. Scroll to Messages, MMS, Templates.

2. Select a template and press Replace to make changes.

Send options

Before sending an MMS, you can set different options.

Receiving MMS messages

•

To edit an option, scroll to Messages

MMS

Options

When you receive an MMS, the phone beeps and the

message Read now? appears in the display. Press Yes

to read the message.

Advanced send options

You can enter more information to accompany the

message as follows:

Note: You can receive a maximum of 20 messages.

You may have to delete old messages before you can

receive new ones.

•

To: – Phone number or email address. These can

be selected from the Phonebook.

•

Subject: – Write a title.

Cc: – Phone number or email address.

Bcc: – Phone number or email address.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

Restrict messages

If your subscription supports instant messaging

services, you can see which of your contacts are

online and what mood they are in. You can also

send and receive messages and join community

chats. Please contact your network operator for

information about Chat configuration settings.

From the Messages, MMS, Options, Restrict Messages,

Home Network or Roaming Network select one of the

following:

Allow – Your phone automatically downloads messages

to your phone as soon as they come to your operator’s

server. This is default.

•

Always Ask – You will be prompted to download or to

keep it on the server.

To enter a chat nickname

You must create a nickname for yourself before

you can use Chat.

1. Scroll to Messages, Chat, Nickname.

2. Enter your nickname (maximum of 6 characters).

Restrict – New messages appear in the box as icons.

No prompt is received with the message.

From the Messages, MMS, Options, Restrict

Messages, Filter, select the type of message you want

to reject automatically:

To start a chat session

•

Advertisements

Anonymous

1. Scroll to Messages, Chat, Start New.

Enter the recipient’s phone number, or retrieve

it from the Phonebook by pressing Look Up.

2. Write your message, press Send.

Chat

The Chat function gives you more options

when messaging. It works in the same way

as chat on the Internet. You can choose a

nickname that will appear in the recipient’s

display each time you send a chat message.

Receiving a chat invitation

When you receive a chat session invitation, the phone

gives you an audible signal and the message New chat

message arrived. Chat now? appears in the display.

•

To read the chat message, press Yes.

Write your chat message reply and press Send.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

•

To suspend a chat session, press

To resume a chat session, scroll to Messages, Chat,

Resume.

To end a chat session, Messages, Chat, End.

You can use your phone to send and receive

email messages. Please note that you need a

subscription that supports data transmission.

For more information, consult your service provider.

•

Area information

Area information is a type of text message (for example

Before you start

a local traffic report) that is sent to all subscribers in

a certain network area. When you receive an area

information message, the message automatically appears

in the display. You cannot save area messages. Please

consult your service provider for more information

about area information codes.

To turn area information on or off, scroll to

Messages, Area Info., Reception.

To enter an area information code, scroll to

Messages, Area Info., Message List, New Code.

First make sure that you have:

•

Set up a data account. See “Data account” on page 57.

Set up and selected an email account. See “Email

account settings” on page 61.

Sending and receiving email messages

The Send and Receive option offers the fastest way

to send email messages saved in the Outbox and check

for new email messages.

•

To write and send an email message

Cell information

1. Scroll to Messages, Email, Write New.

The cell information channel is used by some network 2. Select:

operators to send messages to their subscribers within

a certain network area.

To turn on the channel, scroll to Messages, Area Info.,

Cell Information.

•

To: – Then add name, enter an email address,

or retrieve an email address from the Phonebook

or Archive. To retrieve a saved address from the

Phonebook or retrieve received messages in your

inbox, press Look Up and select either Phonebook

•

Messaging

This is the Internet version of the user's guide. © Print only for private use.

or Archive. When you have finished adding

recipients, press Done to return to writing an

email message.

Note: The number of email messages saved in

the phone depends on the size of the messages. See

“Email account settings” on page 61. All

•

Cc: – If you want to send a copy of the message

to someone.

email messages are also saved on your email server.

•

Priority: – Set the message priority.

Subject: – Write a title, press Ok.

Text: – Write your message, press Ok.

Attachments – Add pictures to a message.

An arrow in the top or bottom left corner indicates

that there are more messages on the server.

To reply to an email message

1. Select Reply.

3. Select one of the following:

•

Send Now – The email message is sent.

Send With Attach. – You can attach a picture from

2. Select Write New or Include this msg to include the

received message.

My Pictures or from a digital camera connected via 3. Write a message, press Send.

IR. Select a picture and press Send.

•

Save To Outbox – The email message is saved in the

Outbox.

Save To Drafts – The email message is saved in the

Drafts folder.

Send and Receive in the Email menu – All email

messages in the Outbox are sent.

To save an email address or a phone number

When the email address or phone number is highlighted,

select Save.

Archiving

You can archive an email message in order to read

it later. You can archive only as much text as the

display shows.

To receive and read email messages

1. Scroll to Messages, Email, Send and Receive.

2. When the email messages have been downloaded to the

phone, scroll to Messages, Email, Inbox to read them.

Messaging

This is the Internet version of the user's guide. © Print only for private use.

To archive an email message

1. Open the email message.

Camera

2. Make sure that the text you want to archive is visible

in the display.

3. Place the cursor in the text and press More.

4. Select Copy To Archive. The text can be found in

Archive in the menu.

Your mobile phone has a digital camera. You can take

pictures and send them as an MMS. To do this, you

need a subscription that supports this service. Please

check with your network operator.

You can also use a picture as a screensaver or as

wallpaper. You can send a picture to a PC or save it

together with a contact in your phonebook so that the

picture appears when that person calls. See “To add a

picture to a phonebook contact” on page 27.

To delete an email message (POP3 users)

1. Scroll to Messages, Email, Inbox.

2. Scroll to the message and press More.

3. Select Mark To Delete. The message is deleted the

next time you connect to your email server by selecting

Send and Receive.

To delete email messages (IMAP4 users)

1. Scroll to Messages, Email, Inbox.

2. Scroll to the message and press More.

3. Select Mark To Delete. The message is marked

for deletion on the server.

4. Select Empty Inbox in the Options menu.

5. Choose if new emails should be downloaded.

6. The messages are deleted on the server.

Camera

This is the Internet version of the user's guide. © Print only for private use.

Taking pictures

Press the camera button on the side of the phone to

activate the camera. Hold the phone as shown in the

illustration. You can see the subject in the phone display.

Press the camera button again to take the picture.

There are different ways to take a picture. You can

scroll to Camera and hold the phone as shown in

the illustration. You can see the subject in the phone

display. Press Capture to take the picture.

Camera

This is the Internet version of the user's guide. © Print only for private use.

You can also take a self-portrait. Hold the phone as

shown in the illustration. You can see your reflection

in the mirror provided. Press the camera button on

the side of the phone to activate the camera. Press

the camera button again to take the picture.

Options

When the camera is activated, press More for the

following options.

My Pictures – View all your pictures.

Size – Choose between Large (288x352 pixels),

Small (120x160 pixels), or Extended. Extended

means that the picture is enlarged to 480x640 pixels

and can be used when a larger viewing area is required,

for example, when uploading a picture to a PC. Note

that this enlarged size will take up extra memory in

the phone.

•

Night Mode – Use in poor lighting conditions.

Effects – Select different effects for your picture.

Default Name – Create a name for your picture.

Self-Timer – The picture is taken a few seconds later.

Tip: To adjust the brightness, press the joystick up

or down repeatedly.

Note: All phones that support pictures can receive

the picture size 120x160. Some phones that support

pictures cannot receive the picture size 288x352.

Camera

This is the Internet version of the user's guide. © Print only for private use.

Saving, discarding and deleting pictures

Picture messaging

Before you send an MMS, you need to enter your

service center number and WAP settings in your

phone. Your network operator provides you with

the settings. See “Setting up WAP and email” on

page 55. The phone that you are sending the picture

to needs to support data transmission and pictures

in order to receive and show the picture.

To discard a picture

When you have taken a picture, a Save icon will appear

in the display immediately above the joystick. If you

do not want to save the picture, select Discard.

To save a picture

Press the joystick to save the picture in My Pictures.

•

To take and send a picture

1. Scroll to Camera.

2. Take a picture by pressing Capture.

To delete a picture from My pictures

1. Scroll to Pictures & Sounds, My Pictures.

2. Highlight the picture you wish to delete, press More. 3. Press Send and create your MMS.

Scroll to and select Delete, press Yes.

Note: If Memory Full appears, you cannot save any

more pictures until you have deleted an item from the

phone’s memory.

Camera

This is the Internet version of the user's guide. © Print only for private use.

Receive settings in a text message

Your GSM network operator or Internet

service provider may be able to send the

required data account, WAP and email

settings direct to your phone in a text

message.

Setting up WAP and email

In order to use the Internet, browse via WAP services

or send and receive picture and email messages, the

following are required:

1. A phone subscription that supports data transmission.

2. Settings entered in your phone.

•

Your settings may already be entered when you buy

your phone.

To request settings from Sony Ericsson

1. Use a PC to go to www.sonyericsson.com. Select your

region and then use the Configurators to request that

a text message be sent to your phone with the settings

you need.

•

You can receive settings in a text message from

your network operator or service provider.

Settings are also available at www.sonyericsson.com

You can set up with the wizard in Connect, WAP

Options, WAP Profiles, New Profile. The wizard

is also started when you try to access the Internet

without having configured a profile.

•

2. When the message arrives,

•

Press Yes to install the new settings.

After installation, see “Using WAP” on page 62.

3. You may also have to register as a WAP/email user

with your service provider or network operator.

Note: If settings already exist in your phone, you

can either keep or replace them. See “Enter or edit

settings manually” on page 56.

Note: Some settings are not mandatory. Please

consult your network operator or service provider

for more information.

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

Set up with the wizard

•

Use your user id and password to log on to the

external data network.

Save the new data account.

If your phone is not set up for WAP, you can ask your

network operator or service provider to provide you

with WAP settings information. Then you can simply

•

Select the new data account to be used.

use the wizard in your phone to help guide you through 8. Enter IP address for the gateway.

the relevant settings.

9. Save the new profile.

Note: The wizard starts automatically if no WAP

settings exist in your phone.

Enter or edit settings manually

You can manually enter or edit settings information

from your network operator or service provider.

To set up with the wizard

1. Scroll to Internet Services, and select a homepage

(for example Sony Ericsson).

2. Create now? appears. Press Yes.

3. Enter a name for the profile. Press Ok.

4. Select Connect Using. Press Edit.

To create profile settings manually

1. Scroll to Connect, WAP Options, WAP Profiles.

2. Select New Profile and press Add to create a new

profile, or select an existing profile and press Edit

to edit an existing profile.

5. Select New Account. Press Add.

6. Select an account type, GSM data or GPRS data.

7. Select New Account, and press Edit, enter the following:

•

See steps 3 - 7 in “To set up with the wizard” on

page 56.

Note: If no settings exist, you must enter data account

•

A name for the data account.

For GSM enter phone number and for GPRS enter 3. Enter or edit settings until all required information is

(connection settings) as well as WAP profile settings.

APN (Access point name address) – the address of

the external data network you want to connect to,

either an IP address or a text string.

entered. Press Save.

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

To edit profile settings

To create a data account manually

1. Scroll to Connect, Data Comm., Data Accounts.

2. See steps 5 - 7 in “To set up with the wizard” on

page 56.

1. Scroll to Connect, WAP Options, WAP Profiles.

2. Select an existing profile and press Edit to edit an

existing profile.

When editing a profile, you can do the following:

To edit a data account

•

Change the name of the profile.

Select data account.

Enter, Select, Change WAP gateway server address. 3. Select Edit.

Add more profile settings, see below.

Remove the profile.

1. Scroll to Connect, Data Comm., Data Accounts.

2. Select a data account.

4. Select the setting you want to edit.

5. Repeat step 4 for other settings you want to edit.

If you select Advanced settings you can also do the

following:

More settings information

To use the WAP browser, via a WAP service provider,

you need settings for:

a specific data account for WAP, and a WAP profile.

•

Enter the address of the WAP site you want to have

as your homepage.

•

Select an alternative data account, if the first fails.

Enter your user id and password for the WAP

gateway.

To use email messaging, via an Internet

service provider, you need settings for:

a specific data account for email, and

an email account.

•

See “WAP security” on page 59.

View pictures while browsing.

Data account

You may want to create or edit an existing data account.

To send a text message to an email address via your

network operator, you need to set an email gateway

phone number.

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

Descriptions

You set up and use additional WAP profiles, for

example, when accessing secure Internet sites, such as

a banking site or a corporate intranet. You then simply

switch between profiles when you need to change the

network connection. See “To set up with the wizard”

on page 56 for more information.

A data account includes connection settings for

access to an Internet server at your service provider.

A WAP profile includes user settings that allow

browsing and picture messaging.

An email account includes user settings that allow

email messaging direct from your phone, such as

those provided by your Internet service provider.

Alternatively, Email via WAP includes user settings

that also allow email messaging, such as those provided

by your Internet service provider. However, this is set

up on your service provider’s WAP site.

Data account

You can have several data accounts saved in your

phone with different settings for different purposes.

The main setting for a data account is the connection

method.

Data account settings can be created with the wizard.

See “Set up with the wizard” on page 56.

Note: Check with your WAP service provider if their

site supports email.

You can choose either GSM Data or GPRS Data

WAP profile

account types.

The WAP settings are stored in a WAP profile. In most

cases, you only need to use one profile to access the

Internet.

Note: Please contact your network operator for

charging details.

GPRS (General Packet Radio Service) allows access

where you can always be online.

Note: You need a subscription that supports GPRS.

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

GPRS settings that are available:

•

The phone number of your Internet service provider.

Select the speed you want for the connection.

Select analog or ISDN connection.

•

APN – the address of the external data network

you want to connect to, either an IP address or

a text string.

•

Your user id to log on to the external data network.

Your password to log on to the external data

network.

Note: If you want to change access type, you have to

create a new data account and select the access type

you want to use.

•

Password request – if this setting is on, you are

asked for a password each time you log on to the

external data network.

Preferred service – if you want to be able to

accept incoming calls during a GPRS session,

select Automatic. If not, select GPRS only.

The IP address that the phone uses when

communicating with the network. If you do not

enter an address, the network provides you with

a temporary IP address.

Preferred service

You can set GPRS or GSM as the preferred service.

To select preferred mode

Scroll to Connect, Data Comm., Preferred Service

and select GPRS and GSM or GSM Only.

WAP security

Your phone has support for WAP secure browsing.

When you turn on security, the connection between

your phone and the WAP gateway is secure.

•

If the network does not provide the IP address to

the DNS server automatically, you may enter it here.

Advanced settings – these are optional. Consult

your network operator.

Note: Security for a connection between a

WAP gateway and a WAP service provider

is the responsibility of the WAP service provider.

GSM settings include some settings that are similar

to GPRS settings and some that are GSM specific

as follows:

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

To turn on a secure connection

1. Scroll to Connect, WAP Options, WAP Profiles.

2. Select the profile to be used. Press Edit.

3. Select Advanced, Security.

To check your contracts

Scroll to Connect, WAP Options, Security, Contracts.

Trusted certificates and Client certificates

To establish a secure connection when using certain

WAP services, for example banking or WAP shopping,

you need certificates in your phone.

4. Select On or Off.

Security module (Locks)

The security module is located on the SIM card, if your

The different types of certificates are as follows:

network operator or service provider supplies such a 1. Server certificates are used to identify a WAP gateway

service. It can contain both certificates and your private

keys. The security module is protected by a special

access PIN and your phone asks you for it when

establishing a secure connection.

to the phone and to show that it is certified by a trusted

authority. The server certificate is checked against

trusted certificates that are stored in the phone or in a

security module. If the phone cannot verify the identity

of a server, you are given the option to terminate or

continue the connection.

2. Trusted certificates are used to verify the WAP gateway

that you are trying to connect to. Your phone may

already contain trusted certificates when you buy it.

If you have a security module, it may also contain

trusted certificates.

To enter the access PIN (for the security

module) and the signature PIN

Scroll to Connect, WAP Options, Security, Locks.

Digital signatures

You can sign a contract with your phone by entering a

digital signature PIN as if signing with a pen on paper.

Digital signature records can be traced back to your

private key through a certificate that is used for signing

a contract.

3. Client certificates are located in a security module

together with your private keys. Client certificates

can be used to present your identity to a bank or other

services. They can also be used for digital signatures.

All transactions (signed contracts) made with your

phone when browsing are stored in your phone.

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

To check the certificates in your phone

Scroll to Connect, WAP Options, Security,

Client Certificates.

the same email settings in your phone as in your PC

email program. If you do not have an e-mail service,

contact your operator to get all the necessary settings.

Protocol – select POP3 or IMAP4.

Incoming Server – enter the name or IP address

of the service provider for incoming email messages.

For example, mail.server.com or 10.1.1.1.

Incoming Port – if needed, change the number

of the port used by the protocol you are using.

Mailbox – enter a surname for your email account.

Password – enter a password for your email account.

Your service provider may alternatively request a

password on connection.

•

Email account settings

An email account specifies, for example,

the server that is used for your email messages.

•

There are two ways to create an email account:

•

create an email account manually

use the Internet

•

To create an email account manually

1. Scroll to Messages, Email, Options.

2. Select Edit Account.

3. Select New Account.

4. Enter a name for the account, for example

Home or Office.

5. Select Connect Using.

6. Select the data account you want to use with this

e-mail account.

7. Enter the rest of the settings in the list, some of which

are optional. To enter the settings, scroll to the setting,

press Select and enter the information. Press Ok to

confirm. Repeat this for each required setting. You use

•

Outgoing Server – enter the name or IP address of

the SMTP server to be able to send email messages.

Outgoing Port – if needed, change the number of the

port used by the SMTP protocol.

Email Address – enter your email address.

Download – select whether to receive headers and text

or headers only.

From Name – enter your name.

Signature – select if you want to add your business card

to your email messages.

•

Setting up WAP and email

This is the Internet version of the user's guide. © Print only for private use.

•

Copy Outgoing – Select On, if you want email

messages sent from your phone also to be sent to

an email address of your choice. This way, your

sent messages are copied and can be saved for

future reference.

Check Interval – Select how often you want the phone

to connect to your email server and check for incoming

email messages.

Using WAP

Your phone has a WAP (Wireless Application Protocol)

browser and email messaging which are designed to

bring a modified Internet to your mobile phone. A wide

range of services are available, for example, news,

entertainment, timetables, reservations, banking,

e-commerce, positioning and email.

If you have both an office and a home email account,

you can set one of them as default:

Before you start

First make sure that you have:

•

Select Set Account from the Messages, Email, Options

menu and select the account.

•

A phone subscription that supports data transmission.

Correct settings in your phone for mobile Internet,

WAP and/or email messaging.

Internet

•

Registered as a WAP/Email user with your network

operator or service provider.

At www.sonyericsson.com you can get

support on how to enter your email/WAP

settings manually (in the Getting Started

Guide). You may also be able to use the Email or WAP

Configurator to set up your email/WAP over the air.

Contact your network operator to obtain your carrier

specific email/WAP settings.

Note: See “Email account settings” on page 61 or

“Email” on page 49 for more information about

email set-up and messaging.

Using WAP

This is the Internet version of the user's guide. © Print only for private use.

To select a WAP profile

To exit WAP and disconnect

1. Scroll to Connect, WAP Options, WAP Profiles.

2. Select the profile you want to use. You then return

to the WAP Options menu and the WAP profile is

selected.

Press More and scroll to Exit WAP.

Options when browsing

1. Select More.

2. Select one of the following:

Using the WAP browser

•

Go to the home page set for the current profile.

Add the site you are currently browsing to your

list of bookmarks, or see the list of bookmarks

for the current profile.

Enter the WAP address of a site you want to visit.

Save a picture from the site.

To start browsing

•

Press the side key for direct access to the Internet

(see “Key functions” on page 8) or

Select either the top middle or top left icon on the

desktop.

•

Send a text message with a link to the current WAP

page to another phone.

When the WAP page is loaded into the phone,

press More and select from the following:

Open your home page at the top of the list,

for example, SonyEricsson.

Go to one of your bookmarks. Select Bookmarks.

Enter the address of a WAP site. Select Enter Address,

to enter a new WAP address or select one of the 10

most recently entered addresses.

•

Send a link to the current site to another phone via

infrared or Bluetooth.

Refresh the contents of the WAP page.

Disconnect and go to standby.

Display current status information, for example,

profile, access type, connection time, data rate,

security, address.

Set the current site as the home page of the WAP

profile you are using.

•

Tip: When you enter a WAP address,

Push inbox for incoming messages via WAP.

the normal http:// prefix is not needed.

Using WAP

This is the Internet version of the user's guide. © Print only for private use.

Note: If you select an email address when browsing

a WAP site, you can reply with a text message.

Downloading

You can download pictures, themes, games and

ringtones, for example, from WAP sites directly

to your phone.

Using bookmarks

You use bookmarks in your mobile phone just as you

do with a PC Internet browser. You can have up to 25

bookmarks.

To download from www.sonyericsson.com

1. Scroll to SonyEricsson.

2. Select what you want to download and follow the

instructions that appear.

To work with bookmarks

1. Scroll to Internet Services.

2. Press More, Bookmarks.

3. Select the bookmark you want to work with.

4. Press More and select one of the following options:

Stored information

The following information can be saved in your phone:

Cache – improves memory efficiency.

Passwords – improves server access efficiency.

Cookies – improves site access efficiency.

•

Go to – Go to the marked WAP address.

Edit – Edit the name and/or the WAP address

of the bookmark.

•

Delete – Delete the bookmark.

Send as Text Msg – Send a link to the WAP address

in a text message.

Send – Send a link to the current WAP address

via infrared.

To clear cache

Scroll to Connect, WAP Options, Clear Cache.

•

To remember passwords

Scroll to Connect, WAP Options, Passwords,

Remember Pwds.

Set as Homepage – Set the WAP address as the

home page.

Using WAP

This is the Internet version of the user's guide. © Print only for private use.

To clear passwords

Scroll to Connect, WAP Options, Passwords,

Clear Passwords.

Transferring and exchanging

information

•

To allow cookies

1. Scroll to Connect, WAP Options, Cookies.

2. Select Allow Cookies.

Bluetooth™ wireless technology

Your phone has built-in Bluetooth wireless technology

which makes it possible for you to connect your phone

wirelessly to other Bluetooth devices such as a

handsfree, PC or other phones. You can, for example,

have a conversation via a cordless Bluetooth handsfree

or browse the Internet, wirelessly connected via your

mobile phone. You can automatically synchronize

information in your phone and your PC. You can also

exchange, for example, contacts, calendar items and

pictures.

To clear cookies

1. Scroll to Connect, WAP Options, Cookies.

2. Select Clear Cookies.

It is advisable to clear any sensitive information

about previously visited WAP services. This is

to avoid a security risk if your phone is misplaced,

lost or stolen.

Note: We recommend that your phone and the

Bluetooth device you are communicating with

are within a range of approximately 33 feet. The

connection may be improved if there are no solid

objects in between your phone and the other

Bluetooth device.

Transferring and exchanging information

This is the Internet version of the user's guide. © Print only for private use.

Before you start

Note: To add a device or accept the addition of

a device to My devices means that the device has

access to functionality and content in the phone.

To communicate with another Bluetooth device, you

first need to add the device to the list of my devices. To

synchronize with your PC, and to browse the Internet,

you also need to install software on your PC from the

Sony Ericsson web site, www.sonyericsson.com.

You can exchange items or play games without having

to add the other device to the list of My Devices.

To organize your list of devices

Scroll to Connect, Bluetooth, My Devices. Then select

a device from the list and press Select to view a list

of options.

To turn Bluetooth on

1. In standby, press More.

2. Select Turn on Bluetooth.

Phone name

You can choose a name for your phone. This name is

shown in other devices when your phone is found, and

is also used for the infrared port.

To add a device to your phone

•

To enter a name, scroll to Connect, Bluetooth,

Options, Phone Name.

1. Scroll to Connect, Bluetooth, My Devices, New Device.

Press Add and your phone searches for all types of

available devices. Press More if you want to select a

specific type of device to search for.

2. The phone searches for Bluetooth devices.

A list of available devices appears in the display.

Select a device.

In order for your phone to be found by other Bluetooth

devices, you must make sure Bluetooth is turned on and

your phone is visible to other devices.

To hide or show your phone when using

Bluetooth

3. Enter a passkey (up to 16 digits) for the device, both

in the phone and, for example, in the PC. (If a passkey 1. Scroll to Connect, Bluetooth, Options, Visibility.

does not come with the Bluetooth device when you buy 2. Select Show Phone or Hide Phone.

it, you need to create one yourself.)

Transferring and exchanging information

This is the Internet version of the user's guide. © Print only for private use.

Handsfree

To send an item

After you select Bluetooth as the transfer method, a list

of possible receivers is presented. First in the list will

be the last device you were in contact with and devices

that have been previously added to your phone. The

phone also searches for other devices which are shown

in the list

To add a Bluetooth handsfree to your phone

1. Scroll to Connect, Bluetooth, Handsfree,

My Handsfree, New Handsfree.

2. Select Add.

Transferring sound when using a handsfree

When you are using a Bluetooth handsfree with your

your phone, you can choose where the sound should

be transferred during a call.

Press More in standby during the call, select Transfer

sound. Then select either to transfer sound to the phone

or to other handsfree devices that have been added to

your phone.

Tip: You can send certain items in your phone

(calendar overviews, appointments and tasks,

contacts, text messages) to specific Bluetooth

printers.

•

Note: In countries where the use of Bluetooth wireless

technology is not allowed, you must ensure that the

Bluetooth function is set to Off.

•

You can select where to direct the sound when making

a call.

Scroll to Connect, Bluetooth, Handsfree, Outgoing

Calls, then select In Handsfree, In Phone, Always Ask.

Infrared port

You can use the built-in infrared port to establish

contact between your phone and a PC or another

device equipped with an infrared port.

Sending and receiving

To send an item using Bluetooth wireless technology,

you need to make sure that the devices are within

33 feet.

Activate the infrared port

Before you can connect to another infrared device

you have to activate the infrared port in your phone.

Transferring and exchanging information

This is the Internet version of the user's guide. © Print only for private use.

•

To activate the infrared port, scroll to Connect,

Infrared Port. From standby, you can also select

More, Turn on Infrared.

Synchronization

You can synchronize the calendar and Phonebook in

your phone with similar programs in, for example, a

PC, PDA or mobile phone and with similar programs

on the Internet.

To connect two devices

1. Place your phone as in the picture. The infrared port

on the phone must face the infrared port on the other

device.

•

To select which order first name and last name appear

in the phone when you synchronize contacts, scroll to

Phonebook, Options, Synchronize View.

Synchronization with nearby devices

After installing the synchronization program from the

Sony Ericsson WAP site, www.sonyericsson.com, you

can synchronize your phone with your PC.

8 in

A status bar shows the progress of the synchronization.

If you use a cable, the synchronization starts as soon

as you connect the cable. For more information, please

refer to the synchronization software online help.

Note: If you are connecting to a PC, make sure

your PC has activated infrared communication

(Start, Settings, Control Panel, Infrared, Options

tab, Enable infrared communication).

2. Your phone now establishes contact with the

other device.

Transferring and exchanging information

Internet synchronization

You can synchronize your mobile phone contacts,

To receive a fax or data call (separate numbers)

1. Connect your phone to a computer.

appointments and tasks with similar programs on the 2. Answer the call from within the software program

Internet, using WAP. Contact your network operator for

more information about these programs on the Internet

and to receive user id, password and addresses for the

different programs. You must also have a WAP profile

set in your mobile phone.

(if it does not answer automatically).

You cannot answer a fax or data call by pressing Yes

on the phone.

One number

If you have a SIM card that does not support separate

fax and data numbers, the phone does not recognize

the type of incoming call.

Fax and data calls

Send fax and data calls

If you want to receive a fax or data call, you have to set

the phone to one of these options. Once you have set

your phone for a specific incoming call, it stays like this

until you change it.

To send fax messages and make data calls, you need to

connect your phone to a computer, and then start the

appropriate software program.

To select the call type you want your next incoming call

to be, scroll to Calls, Next Call, Next Incoming Call.

Receive fax and data calls

The procedure of receiving fax messages and data calls

depends on your network and subscription. If you have

separate numbers for voice, fax and data calls, your

phone recognizes the type of call.

Transferring and exchanging information

Stopwatch

More features

Scroll to Organizer, Stopwatch.

Press Start to start the stopwatch.

Press New Lap to start a new lap time.

Press Stop to finish.

Press Restart to restart the stopwatch.

Press Reset to reset the stopwatch.

•

Alarm clock

The alarm can be set to ring at a specific time within 24

hours, or recurrently at a specific time on several days.

You can have both these alarms set at the same time.

Even if you have set your phone to silent, the alarm

signal rings. The alarm clock also rings if the phone

is turned off.

Note: The stopwatch is turned off when you answer

an incoming call or when you exit the stopwatch menu.

To set an alarm

Timer

1. Scroll to Organizer, Alarms, Alarm.

2. Enter the time, press Save.

The phone has a timer that can be set to count down

from 99 hours, 59 minutes, 59 seconds.

To set the timer, scroll to Organizer, Timer. When the

signal rings, press any key to turn it off.

•

To change the alarm time, scroll to Organizer, Alarms,

Alarm, New Time.

Press any key to turn the alarm signal off when it rings.

If you do not want the alarm to be repeated, press Yes.

To cancel the alarm, scroll to Organizer, Alarms,

Alarm, Cancel.

To set a recurrent alarm, scroll to Organizer, Alarms,

Recurrent Alarm. Then enter the time and select the

days that you want the alarm to recur by scrolling and

pressing Check. Press Save to exit the menu.

To select an alarm signal, scroll to Settings,

Sounds and Alerts, Alarm Signal.

•

Calculator

The phone has a calculator, which can add, subtract,

multiply, divide and calculate percentages.

Enter a digit and scroll to a symbol (÷, x, -, +, ., %, =).

•

Press

Press and hold

to delete a digit or symbol.

to start a new calculation.

Note: Please note that the accuracy of the calculator

is limited.

•

More features

Code memo

To open code memo for the first time

Instead of having to remember all the different security 1. Scroll to Organizer, Code Memo.A message with

codes (for credit cards, etc.) you can save them in the

code memo in your phone. Then all you need to

instructions appears.

2. Press Ok.

remember is the password to open the code memo. You 3. Enter a four-digit password to open Code Memo,

can save a maximum of ten codes in the code memo.

press Ok.

4. Re-enter the new password to confirm.

5. Enter a checkword (maximum 15 characters), press Ok.

The checkword can consist of both letters and numbers.

To enter a number, press and hold the key.

Checkword and security

To confirm that you have entered the correct password

for the code memo and to prevent unauthorized access

to your codes, you must enter a checkword. When you

enter your password to open the code memo, the

To add a new code

checkword is shown for a short time. If the password 1. Scroll to Organizer, Code Memo.

is correct, the correct codes are shown. If you enter the 2. Enter your password.

incorrect password, the checkword and the codes that 3. Select New Code, press Add.

are shown are also incorrect.

Factors strengthening the security of the Code memo

function are:

4. Enter a name associated with the code, for example,

the name of the credit card company, press Ok.

5. Enter the code, press Ok.

•

You get no feedback about whether the password is

correct, except for the checkword, and only you know

the checkword.

To open code memo

1. Scroll to Organizer, Code Memo.

2. Enter your password, press Ok.

Your entered checkword appears. When the decryption

process has finished, your codes are shown.

•

All codes are encrypted in the mobile phone.

When you access your codes, they are shown for

a limited time only.

More features

To change the password

Calendar

1. Open code memo as described above.

2. Press More, Change Password.

3. Enter your new password, press Ok.

4. Re-enter the new password, press Ok.

5. Enter a checkword, press Ok.

You can use the calendar to keep track of important

meetings that you need to attend, phone calls that you

need to make or tasks that you need to do. The calendar

can be synchronized with a PC calendar or, using WAP,

with a calendar on the Web. For more information see

“Synchronization” on page 68.

Forgot your password?

Appointments and tasks

If you forget your password, just enter any password

to access the Code Memo function. The checkword and

codes that are then shown are incorrect. You must now

reset the Code Memo.

You can save up to 300 appointments and 80 tasks in

your calendar, depending on the size of each item. You

can choose to add a new appointment or task, or to use

an old appointment or task as a template by copying

and editing it.

To reset code memo

1. Press More, Reset.

Tip: When you are in the list of appointments and

tasks for a certain day, you can press More to edit,

delete, reschedule, send or copy. You can also call

a number included in a phone call task.

2. Reset code memo? appears. Press Yes.

The Code memo is reset and all entries are cleared.

The next time you enter the Code memo, you must

start at “To open code memo for the first time” on

page 71.

To add a new appointment

1. Scroll to Organizer, Calendar, Add Appointment.

2. Enter the appropriate information, for example, subject,

location, icon and times. Confirm each entry with Ok,

Select, or Save.

3. If you want to set a reminder for your appointment,

select a reminder.

More features

To add a new task

1. Scroll to Organizer, Calendar, Tasks, New Task,

press Add.

Tip: In the monthly and weekly views, you can go to

next week by pressing 3, to next month by pressing 6

and to next year by pressing 9. You can go back a week,

a month or a year by pressing 1, 4, and 7 respectively.

2. Select a category.

To reach the current day, press

•

If the category is a phone call, enter the phone

number, press Ok.

Calendar settings

Select Options from the Organizer, Calendar menu

and then select one of the options:

3. Enter a subject, press Ok.

4. If you want to set a reminder for your appointment,

press Yes. Save the date and time.

•

View.

Starting Day – Select a start day for the week.

Week Display – Select 5-day week or 7-day week.

Profile Switch – If you want the phone to remind you

to switch profiles when a meeting is about to start,

select Manual. If you want the profile to be switched

automatically, select Auto, then select a profile.

Reminders – Select Always if you want the reminder

to sound even though the phone is turned off.

Viewing your calendar

To view your calendar content, scroll to Organizer,

Calendar, and then select one of the following:

•

View Today – All appointments for today as

well as unfinished tasks are shown.

View Week – Move within and among the days

by moving the joystick. Press Select to view a

certain day.

•

View Month – Move within and among the days

or weeks by moving the joystick. Press Select to

view a certain week. Days on which you have

appointments are marked in bold.

Check the status

You can check how much space is left for new

appointments and tasks

To check the status, scroll to Organizer, Calendar,

Advanced, Memory Status.

•

Tip: To delete all appointments and tasks in your

calendar, select Delete All in the Advanced menu.

More features

Exchanging calendar entries

To search for appointments or tasks

1. Scroll to Organizer, Calendar, Advanced, Find.

2. Check or uncheck if you want to search for

appointments or tasks (if you have added any).

Press Ok.

You can send and receive appointments and tasks

using Bluetooth wireless technology, the infrared

port or MMS.

To send an appointment or a task

1. In the list of appointments and tasks for a certain day,

scroll to the item you want to send and press More.

2. Select Send.

3. Enter the text you want to search for, press Ok.

Appointments or tasks that match your search

are shown. Select to view the item or edit, delete,

reschedule, send, or copy the item by pressing More.

3. Select a transfer method.

Sound recorder

To receive an appointment or a task

With the Sound recorder function, you can record

either your own memos or calls. All participants in

the call are automatically recorded. The recording is

stopped if any party ends the call.

1. From standby, press More and scroll to Turn on

Bluetooth or Turn on Infrared. This would activate

either the Bluetooth or infrared function.

2. Add appointment? or Add task? appears. Press Yes

to save the appointment or task in your calendar.

If your calendar is full, you must remove calendar

items before you can save any new ones.

The recordings are saved in your mobile phone and

can be accessed even if you change your SIM card.

Note: In some countries or states it is required

by law that you inform the other person before

recording the call.

Find an appointment or task

You can search for appointments and tasks that contain

a specific text.

To record a call

1. During the call press the joystick.

2. Select Record.

More features

To start a sound recording

1. Scroll to Pictures & Sounds, Record Sound.

To delete or rename a sound recording

1. Scroll to Pictures & Sounds, My Sounds.

2. Wait until you hear a tone. When the recording starts, 2. Scroll to the recording you wish to delete or rename.

the display shows Recording together with the time

of the current recording.

3. Press More when the recording is highlighted.

4. Select Delete or Rename.

To end the recording

Entertainment

Press Stop.

Your phone has several entertaining applications and

games. You can play some of the games with another

person, both using your phone, or you can play on two

phones, using Bluetooth wireless technology or

infrared. You can also download games and applications

directly to your phone. Help texts are available in some

games and applications.

Tip: You can start recording or listening to recordings

with a voice command. See “Voice control” on

page 31.

The recording stops automatically if you receive an

incoming call or when the call ends. You hear a tone

a few seconds before the memory is full.

To start an application

1. Scroll to Entertainment, Games & More.

2. Select an application, press Start.

To listen to your recordings

1. Scroll to Pictures & Sounds, My Sounds.

2. Select the recording you wish to hear. Press Play.

To download an application

1. Scroll to Entertainment, Games & More.

2. Scroll to New Applications, press Go to.

To send a recording

1. Scroll to Pictures & Sounds, My Sounds.

2. Scroll to the recording you wish to send.

3. Press More and select Send.

More features

Note: Make sure the file sizes do not exceed the free

memory in your phone. See “Checking the memory”

on page 30. Application includes Java games.

To add a note

1. Scroll to Organizer, Notes, New Note, Add.

2. Enter the note, press Ok.

To start and end a game

To view the notes

1. Scroll to Entertainment, Other Games.

2. Select a game, press Start.

3. Select Help to read help texts.

1. Scroll to Organizer, Notes.

2. A list which shows the beginning of each note

appears. Select the note that you want to view.

4. Press

to end the game.

Post note

To download a game

You can display a note in standby mode.

1. Scroll to Entertainment, Other Games.

2. Scroll to New Games, press Go to.

To display a note in standby

1. Press More and scroll to Post Note.

2. Select the note you want to display in standby

or select New Note to write a new note.

Tip: If you press More, you will get more

information about your game.

Notes

•

If the note is long and you cannot see all of it,

press More, Show Note.

To turn off the note in standby, press More, Hide Note.

If you need to remember something, you can make a

note of it in your phone. You can add, edit, delete or

send a note. You can save 10 notes.

More features

Exchanging notes

Security

You can send and receive notes using Bluetooth

wireless technology, the infrared port or picture

messaging.

SIM card lock

The SIM card lock protects your subscription, but

not your phone itself, from unauthorized use. If you

change SIM cards, the phone still works with the new

SIM card.

Most SIM cards are locked at the time of purchase.

If the SIM card lock is on, you have to enter a “PIN”

(Personal Identity Number) every time you turn on

your phone.

If you enter your PIN incorrectly three times in a row,

the SIM card is blocked. This is indicated by the

message PIN Blocked. To unblock it you need to enter

your “PUK” (Personal Unblocking Key). Your PIN and

PUK are supplied by your operator.

To send a note

1. Scroll to a note and press More to display the list

of options.

2. Select Send.

3. Select a transfer method.

To receive a note

1. From standby, press More and scroll to

Turn on Bluetooth or Turn on Infrared.

Both the infrared port and the Bluetooth

function are activated.

2. Add Note? appears. Press Yes to save the

note among your other notes.

To unblock your SIM card

1. PIN Blocked appears in the display.

2. Enter your PUK and press Ok.

3. Enter a new four- to eight-digit PIN and press Ok.

4. Re-enter the new PIN to confirm and press Ok.

•

To edit your PIN, scroll to Settings, Locks, SIM

Lock, Change PIN.

Security

Note: If the message “Codes do not match” appears,

you entered the new PIN incorrectly. If the message

“Wrong PIN” appears, followed by “Old PIN:”, you

entered your old PIN incorrectly.

Phone lock on

If the phone lock is on, the message Phone locked

appears each time you turn on the phone. You have

to enter your code followed by Yes to use your phone.

•

To edit your PIN2, scroll to Settings, Locks, SIM Lock,

Change PIN2.

Automatic

If the phone lock is set to automatic, you do not need

to enter your phone lock code until a different SIM card

is inserted in the phone.

To edit your phone lock code, scroll to Settings, Locks,

Phonelock, Change Code.

To turn the SIM card lock on or off

1. Scroll to Settings, Locks, SIM Lock,

Protection.

•

2. Select On or Off.

3. Enter your PIN and press Ok.

Note: It is important that you remember your new

code. If you should forget it, you have to hand in

your phone to your local Sony Ericsson retailer.

Phone lock

The phone lock protects the phone against

unauthorized use if it is stolen and the SIM card

is exchanged. It is not on when you buy the phone.

You can change the phone lock code (0000) to any

four- to eight-digit personal code. The phone lock

can be set to on, automatic or off.

To set the phone lock

1. Scroll to Settings, Locks, Phonelock, Protection.

2. Select an alternative.

3. Enter the phone lock code and press Ok.

Security

Troubleshooting

This chapter lists some problems that you might

encounter while using your phone. Some problems

require that you call your service provider, but you

can easily correct most of the problems yourself.

Sony Ericsson Consumer web site

On www.SonyEricsson.com there is a support section

where help and tips are only a few clicks away. Here

you find the latest software updates, tips on how to use

your product more efficiently, function guides for some

of the products and additional help when you require it.

The phone cannot be switched on

Handheld phone

Recharge or replace the battery.

See “SIM card and battery information” on page 5.

Technical Assistance/Customer Service

•

United States - 1-866-766-9374

Latin America - +1-305-755-6789

Canada - 1-800-668-2101

No indication of charging

Other countries - +1-919-472-7908

When you start charging a battery that is empty or a

battery that has not been used for a long time, it may

take up to 30 minutes before the battery icon appears

in the display.

Accessible Solutions/Special Needs

You can use your TTY terminal with your Sony

Ericsson mobile phone (with the necessary accessory).

For information on Accessible Solutions for individuals

with special needs call the Sony Ericsson Special Needs

Center at 877-878-1996 (TTY) or 877-207-2056 (voice),

or visit the Sony Ericsson Special Needs Center at

www.SonyEricsson-snc.com.

Menu language

If the display shows a language that you do not

understand, you can always choose Automatic

(determined by your SIM card) by pressing

8888 in standby. You can always choose English

by pressing 0000 in standby.

Grey menu options

No network

Grey text indicates a function that is

temporarily unavailable, for example due

to your subscription or due to a certain

setting which has not been turned on.

Since you cannot send themes, pictures and sounds that

are copyright-protected, the Send menu is sometimes

unavailable.

There is no network within range or the received signal

is too weak. You have to move to get a signal that is

strong enough.

Wrong PIN/Wrong PIN2

You have entered your PIN or PIN2 incorrectly.

Enter the correct PIN or PIN2, and press Yes.

See “SIM card lock” on page 77.

Error messages

Codes do not match

Insert SIM

When you want to change a security code (for example,

your PIN) you have to confirm the new code by entering

it again. The two codes that you have entered do not

match. See “SIM card lock” on page 77.

There is no SIM card in the phone or you may have

inserted it incorrectly. Insert a SIM card.

See “SIM card and battery information” on page 5.

Insert correct SIM card

The phone is set to work only with certain SIM cards.

Insert the correct SIM card.

PIN Blocked/PIN2 blocked

You have entered your PIN or PIN2 incorrectly three

times in a row. To unblock your phone, see “SIM card

lock” on page 77.

Emergency Calls Only

You are within range of a network, but you are not

allowed to use it. However, in an emergency, some

operators allow you to call the emergency numbers

112, 911, and 08. See “Making emergency calls” on

page 25.

PUK blocked – contact operator

You entered your personal unblocking key code (PUK)

incorrectly 10 times in a row. Contact your network

operator or service provider.

Troubleshooting

Phone locked

The phone is locked. To unlock the phone,

See “Phone lock” on page 78.

Additional information

Guidelines for Safe and Efficient Use

Phonelock code:

Please read this information before using

your mobile phone.

Your phone comes with the phonelock code, 0000.

You can change it to any four- to eight-digit code.

See “Phone lock” on page 78.

RECOMMENDATIONS

•

Always treat your product with care and

keep it in a clean and dust-free place

Number not permitted

The Fixed Dialing function is on and the number

you have dialed is not on your fixed numbers list.

See “Fixed dialing” on page 40.

Do not expose your product to liquid or

moisture or humidity.

Do not expose your product to extreme

high or low temperatures.

Charging, alien battery

The battery you are using is not a Sony Ericsson-

approved battery. Please refer to “Guidelines for

Safe and Efficient Use” on page 81 and “Limited

Warranty” on page 85.

Do not expose your product to open

flames or lit tobacco products.

Do not drop, throw or try to bend

your product.

•

Do not paint your product.

Do not use your product near medical equipment

without requesting permission.

Additional information

•

Do not use your product when in, or around aircraft,

or areas posted “turn off two-way radio”.

RADIO FREQUENCY (RF) EXPOSURE

AND SAR

Your mobile phone is a low-power radio transmitter

and receiver. When it is turned on, it emits low levels

of radio frequency energy (also known as radio waves

or radio frequency fields).

Do not use your product in an area where

a potentially explosive atmosphere exists.

Do not place your product or install

wireless equipment in the area above

your car’s air bag.

Governments around the world have adopted

comprehensive international safety guidelines,

developed by scientific organizations, e.g. ICNIRP

(International Commission on Non-Ionizing Radiation

Protection) and IEEE (The Institute of Electrical and

Electronics Engineers Inc.), through periodic and

thorough evaluation of scientific studies. These

guidelines establish permitted levels of radio wave

exposure for the general population. The levels include

a safety margin designed to assure the safety of all

persons, regardless of age and health, and to account

for any variations in measurements.

Specific Absorption Rate (SAR) is the unit of

measurement for the amount of radio frequency energy

absorbed by the body when using a mobile phone. The

SAR value is determined at the highest certified power

level in laboratory conditions, but the actual SAR level

of the mobile phone while operating can be well below

this value. This is because the mobile phone is designed

to use the minimum power required to reach the network.

Variations in SAR below the radio frequency exposure

guidelines do not mean that there are variations in safety.

While there may be differences in SAR levels among

•

Do not attempt to disassemble your

product. Only Sony Ericsson authorised

personnel should perform service.

ANTENNA

Only use an antenna that has been

specifically designed by Sony Ericsson for your mobile

phone. Use of unauthorised or modified antennas could

damage your mobile phone and may violate regulations,

causing loss of performance and SAR levels above the

recommended limits (see below).

EFFICIENT USE

Hold your mobile phone as you would any other phone.

Do not cover the top of the phone when in use, as this

affects call quality and may cause the phone to operate

at a higher power level than needed, thus shortening

talk and standby times.

Additional information

mobile phones, all Sony Ericsson mobile phone

models are designed to meet radio frequency

exposure guidelines.

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC that it

does not exceed the limit established by the

intended for use with your product. Please note that

because of possible interference to electronic equipment,

some vehicle manufacturers forbid the use of mobile

phones in their vehicles unless a handsfree kit with an

external antenna supports the installation.

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(that is, at the ear and worn on the body) as required

by the FCC for each model. For body worn operation,

this phone has been tested and meets FCC RF

exposure guidelines when the handset is positioned a

minimum of 15 mm from the body without any metal

parts in the vicinity of the phone or when used with the

original Sony Ericsson body worn accessory intended

for this phone. Use of other accessories may not

ensure compliance with FCC RF exposure guidelines.

A separate leaflet with SAR information for this mobile

phone model is included with the material that comes

Always give full attention to driving and pull off the road

and park before making or answering a call if driving

conditions so require.

PERSONAL MEDICAL DEVICES

Mobile phones may affect the operation of cardiac

pacemakers and other implanted equipment. Please

avoid placing the mobile phone over the pacemaker,

e.g. in your breast pocket. When using the mobile phone,

place it at the ear opposite the pacemaker. If a minimum

distance of 15 cm (6 inches) is kept between the mobile

phone and the pacemaker, the risk of interference is

limited. If you have any reason to suspect that interference

is taking place, immediately turn off your mobile phone.

Contact your cardiologist for more information.

For other medical devices, please consult the

manufacturer of the device.

with this mobile phone. This information can also be found

together with more information on radio frequency

exposure and SAR, on: www.sonyericsson.com.

DRIVING

CHILDREN

Please check if local laws and regulations restrict the

use of mobile phones while driving or require drivers

to use handsfree solutions. We recommend that you

use only Ericsson or Sony Ericsson handsfree solutions

DO NOT ALLOW CHILDREN TO PLAY

WITH YOUR MOBILE PHONE OR ITS

ACCESSORIES. THEY COULD HURT

THEMSELVES OR OTHERS, OR COULD

Additional information

ACCIDENTALLY DAMAGE THE MOBILE PHONE

OR ACCESSORY. YOUR MOBILE PHONE OR ITS

ACCESSORY MAY CONTAIN SMALL PARTS THAT

COULD BE DETACHED AND CREATE A CHOKING

HAZARD.

mobile phone features are in use. Check with your

local service provider.

BATTERY USE AND CARE

We recommend that you fully charge the battery before

you use your mobile phone for the first time. The battery

should only be charged in temperatures between +5°C

(+41°F) and +45°C (+113°F).

DISPOSING OF THE PRODUCT

Your mobile phone should not be placed

in municipal waste. Please check local

regulations for disposal of electronic

products.

A new battery or one that has not been used for a long

time could have reduced capacity the first few times it

is used.

The talk and standby times depend on the actual

transmission conditions when using the mobile phone.

If the mobile phone is used near a base station, less

power is required and talk and standby times are

prolonged.

POWER SUPPLY

Connect the AC power adapter only to designated power

sources as marked on the product. Make sure the cord

is positioned so that it will not be subjected to damage

or stress. To reduce risk of electric shock, unplug the

unit from any power source before attempting to clean

it. The AC power adapter must not be used outdoors or

in damp areas. Never alter the cord or plug. If the plug

will not fit into the outlet, have a proper outlet installed

by a qualified electrician.

•

Warning! May explode if disposed of in fire.

Use only Sony Ericsson branded original batteries and

chargers intended for use with your mobile phone. Other

chargers may not charge sufficiently or may produce

excessive heat. Using other batteries and chargers could

be dangerous.

EMERGENCY CALLS

Mobile phones operate using radio signals, which cannot

guarantee connection under all conditions. Therefore you

should never rely solely upon any mobile phone for

essential communications (e.g. medical emergencies).

Emergency calls may not be possible on all cellular

networks or when certain network services and/or

•

Do not expose the battery to liquid.

Do not let the metal contacts on the battery touch

another metal object. This could short-circuit and

damage the battery.

Additional information

•

Do not disassemble or modify the battery.

Limited Warranty

Sony Ericsson Mobile Communications AB, S-221 88

Lund, Sweden, (Sony Ericsson), provides this Limited

Warranty for your mobile phone and original accessory

delivered with your mobile phone (hereinafter referred

to as “Product”).

Do not expose the battery to extreme

temperatures, never above +60°C (+140°F).

For maximum battery capacity, use the

battery in room temperature.

Should your Product need warranty service, please

return it to the dealer from whom it was purchased,

or contact your local Sony Ericsson Customer Care

Center (national rates may apply) or visit

•

Turn off your mobile phone before removing

the battery.

www.SonyEricsson.com to get further information.

•

Keep out of children’s reach.

OUR WARRANTY

Use the battery for the intended

purpose only.

Subject to the conditions of this Limited Warranty,

Sony Ericsson warrants this Product to be free from

defects in design, material and workmanship at the

time of its original purchase by a consumer, and for

a subsequent period of one (1) year.

•

Do not allow the battery to be put into the mouth.

Battery electrolytes may be toxic if swallowed.

DISPOSING OF THE BATTERY

WHAT WE WILL DO

If, during the warranty period, this Product fails to operate

under normal use and service, due to defects in design,

materials or workmanship, Sony Ericsson authorized

distributors or service partners, in the country* where

you purchased the Product, will, at their option, either

repair or replace the Product in accordance with the

terms and conditions stipulated herein.

Please check local regulations for disposal

of batteries or call your local Sony Ericsson

Customer Care Center for information.

The battery should never be placed in

municipal waste. Use a battery disposal

facility if available.

Sony Ericsson and its service partners reserve the right

to charge a handling fee if a returned Product is found not

to be under warranty according to the conditions below.

Additional information

Please note that your personal settings/downloads might 4. Since the cellular system on which the Product is to

operate is provided by a carrier independent from

Sony Ericsson, Sony Ericsson will not be responsible for

the operation, availability, coverage, services or range

of that system.

be lost when the Product is repaired or replaced.

CONDITIONS

1. The warranty is valid only if the original proof of purchase

issued to the original purchaser by an, for this Product,

Sony Ericsson authorized dealer, specifying the date

of purchase and serial number**, is presented with the

Product to be repaired or replaced. Sony Ericsson

reserves the right to refuse warranty service if this

information has been removed or changed after the

original purchase of the Product from the dealer.

5. This warranty does not cover Product failures caused

by installations, modifications, or repair or opening of

the Product performed by a non-Sony Ericsson

authorized person.

6. The warranty does not cover Product failures which have

been caused by use of accessories or other peripheral

devices which are not Ericsson or Sony Ericsson branded

original accessories intended for use with the Product.

2. If Sony Ericsson repairs or replaces the Product, the

repaired or replaced Product shall be warranted for

the remaining time of the original warranty period or

for ninety (90) days from the date of repair, whichever

is longer. Repair or replacement may involve the use

of functionally equivalent reconditioned units. Replaced

parts or components will become the property of

Sony Ericsson.

7. Tampering with any of the seals on the Product will void

the warranty.

8. THERE ARE NO EXPRESS WARRANTIES, WHETHER

WRITTEN OR ORAL, OTHER THAN THIS PRINTED

LIMITED WARRANTY. ALL IMPLIED WARRANTIES,

INCLUDING WITHOUT LIMITATION THE IMPLIED

WARRANTIES OF MERCHANTABILITY OR FITNESS

FOR A PARTICULAR PURPOSE, ARE LIMITED TO

THE DURATION OF THIS LIMITED WARRANTY. IN NO

EVENTSHALL SONY ERICSSON OR ITS LICENSORS

BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL

DAMAGES OF ANY NATURE WHATSOEVER,

3. This warranty does not cover any failure of the Product

due to normal wear and tear, or due to misuse, including

but not limited to use in other than the normal and

customary manner, in accordance with the Sony Ericsson

instructions for use and maintenance of the Product.

Nor does this warranty cover any failure of the Product

due to accident, software or hardware modification

or adjustment, acts of God or damage resulting from

liquid.

INCLUDING BUT NOT LIMITED TO LOST PROFITS

OR COMMERCIAL LOSS, TO THE FULL EXTENT

THOSE DAMAGES CAN BE DISCLAIMED BY LAW.

Additional information

Some countries/states do not allow the exclusion or

limitation of incidental or consequential damages, or

limitation of the duration of implied warranties, so the

preceding limitations or exclusions may not apply to you.

FCC Statement

This device complies with Part 15 of the

FCC rules. Operation is subject to the

following two conditions:

(1) This device may not cause harmful interference,

and (2) This device must accept any interference

received, including interference that may cause

undesired operation.

The warranty provided does not affect the consumer's

statutory rights under applicable legislation in force,

nor the consumer's rights against the dealer arising

from their sales/ purchase contract.

* EUROPEAN UNION (EU)

If you have purchased your Product in an EU country

you can have your Product serviced, under the conditions

set out above, within the warranty period in any EU country

where an identical Product is sold by an authorized

Sony Ericsson distributor. To find out if your Product is

sold in the EU country you are in, please call the local

Sony Ericsson Customer Care Center. Please observe

that certain services may not be possible elsewhere

than in the country of original purchase, for example

due to the fact that your Product may have an interior

or exterior which is different from equivalent models

sold in other EU countries. It may not be possible to

repair SIM-locked Products.

** In some countries additional information is requested.

If so, this is clearly shown on the valid proof of

purchase.

Additional information

Declaration of Conformity

Icons

We, Sony Ericsson Mobile Communications AB of

Nya Vattentornet

S-221 88 Lund, Sweden.

The table below shows icons which may appear

in standby or in the menus.

Icon

Description

declare under our sole responsibility that our product

Desktop icons

Sony Ericsson type AAB-1031012-BV

Your personal phonebook.

and in combination with our accessories, to which this

declaration relates is in conformity with the appropriate

standards 3GPP TS 51.010-1, EN 301489-7,

Handling of text, pictures,

email and voice messages.

EN 300328, EN 301489-17 and EN 60950, following

the provisions of, Radio Equipment and

Telecommunication Terminal Equipment directive

99/5/EC with requirements covering EMC directive

89/336/EEC, and Low Voltage directive 73/23/EEC.

Handling of call time, call cost information

and ongoing calls.

Handling of ongoing calls.

Only available during calls.

Camera function.

Lund, August 2003

Place & date of issue

0682

Handling of pictures, sounds and themes.

Personal settings including profiles,

display, language, time and locks.

Hiroshi Yoshioka, Head of Product Business Unit GSM/UMTS

Gives you access to Internet services.

We fulfil the requirements of the R&TTE Directive

(99/5/EC).

Icons

Icon

Description

Icon

Description

Calendar, alarm clock and other extras.

GPRS is within range and can be used.

Receive items via Bluetooth, infrared,

networks, data communications settings,

WAP options and accessories.

Tells you that you are in

a premium charge zone.

Tells you the status of the battery.

You cannot receive any incoming calls.

You have missed an incoming call.

Operator services.

Games and applications.

You are running Java.

All incoming calls are forwarded to a

defined number.

Standby

No calls or only certain calls from numbers

in a list are received.

Desktop icon.

All signals are off,

except the alarm and timer.

A note is posted in standby.

The alarm clock has been set and is on.

The timer has been set and is on.

Tells you the strength of

the GSM network signal.

GPRS is within range.

Icons

Icon

Description

Icon

Description

A profile other than Normal

has been chosen.

Line 1 is in use for outgoing calls.

Line 2 is in use for outgoing calls.

The keypad is locked.

Ciphering is currently not being provided

by the network.

The card lock or phone lock is on.

A secure WAP connection is established.

The network is preferred and can be used.

You have received a text message.

You have received an email message.

You have received an MMS.

The network is forbidden

and cannot be used.

Your home network is

within range and can be used.

You have received a voice message.

You have received a WAP push message.

The infrared port is on.

An ongoing call.

The Bluetooth function is on.

A Bluetooth headset, added to your phone.

A Bluetooth phone, added to your phone.

A Bluetooth PC, added to your phone.

Infrared communication is in progress.

A GPRS session is in progress.

Icons

Icon

Description

Icon

Description

A Bluetooth printer, added to your phone.

An all day calendar appointment.

A reminder is set for

a calendar appointment.

A Bluetooth PDA, added to your phone.

Other Bluetooth device.

The task is a phone call.

A completed task in your calendar.

A task or message of high priority.

A task or message of low priority.

Calendar

The appointment is a meeting.

The appointment is a date.

The appointment is to travel.

The appointment is a vacation.

The appointment is an anniversary.

A miscellaneous appointment.

A miscellaneous task.

Phonebook

A home number in the phonebook.

A work number in the phonebook.

A mobile number in the phonebook.

An email address in the phonebook.

Icons

Icon

Description

Icon

Description

A picture is connected to the contact.

A damaged message.

Messages

A text message is saved on the SIM card.

A read MMS.

An unread MMS.

A voice message has not been checked.

A message has not been read.

A theme is attached to a message.

A message has been read.

The message has not been sent.

The message has been sent.

A message has been read by the recipient.

A message has been

delivered to the recipient.

Only part of a read email message is saved

in the phone.

A sent message that has expired

or been rejected by the recipient.

Only part of an unread email or a

multimedia message is saved in the phone.

Pre-defined message template

(not editable).

A read message will be deleted the next

time you connect to the server.

User-defined message template.

An unread message will be deleted the next

time you connect to the server.

Icons

Icon

Description

Icon

Description

An MMS is playing.

More message options.

An MMS has been stopped.

An MMS has been paused.

Picture could not be shown.

Calls

A missed call in the call list.

An answered call in the call list.

A dialed number in the call list.

Call from a number on the SIM card.

Your magic word is active.

A business card is attached to

a picture message.

An event is attached to an MMS.

A theme is attached to an MMS.

An MMS contains a melody.

An MMS contains a recorded sound.

Cursor in an MMS.

Icons

Icon

Description

Icon

Description

Multimedia

Text input

An i-Melody saved in My Sounds.

T9 text input.

An e-Melody saved in My Sounds.

Upper and lowercase letters.

Uppercase letters.

A polyphonic melody saved in My Sounds.

Lowercase letters.

Camera

Large picture size.

Small picture size.

Icons

call list 26

Display

contrast 21

icons 88

light 21

Downloading 64

Drawing pictures 17

Index

emergency 25

fixed dialing 40

forward 36

groups 28

international 25

make 6, 24

Alarm clock 70

Answering mode 22

Area information 49

Assistance 79

missed 26

Email 49

gateway 57

settings 55, 57, 61

Emergency calls 25

Entertainment 75

Error messages 80

put on hold 37

receive 6, 25

reject 25

restrict 40

speed dialing 30

Camera 51

Cell information 49

Chat 48

Code memo 71

Conference calls 38

Contacts 27

Battery 5

Bluetooth wireless technology 65

Bookmarks 64

Business cards 29

Calculator 70

Calendar 72

Call costs 36

calling card 39

credit limit 36

minute minder 21

Call time 36

Calls

Fax, sending and receiving 69

Fixed dialing 40

Forwarding calls 36

Contrast (display) 21

Games 75

GPRS 58

Groups 28

closed user groups 41

conference calls 38

Data calls 69

Declaration of conformity 88

Desktop 7

accept 41

answer 6, 25

automatic redialing 24

Index

Menu language 21

Minute Minder 21

Mirror 53

Picture messaging 46, 54

Pictures 16

draw 17

Handsfree 22

Help texts 11

Missed calls 26

MMS 46

Mobile Internet, see WAP 62

Multimedia Messaging Service 46

Multitap text input 13

Music DJ 20

edit 17

exchange 18

change 77

enter 6

PIN2

change 78

Profiles 23

PUK 77

Icons (display) 88

Infrared port 67

International calls 25

International emergency number 25

Internet, see WAP 62

My numbers 22

Key functions 8

Key sound 21

Keypad lock 22

Navigating the menus 7

Networks 6, 42

Notes 76

Redialing 24

using call list 26

Reset 24

Restrict messages 48

Ring sounds 19

Language (display) 21

Locks

Online services 11

Own number 22

keypad 22

phone 78

SIM card 77

Long messages 45

Passkey 66

Screensaver 19

Security

Personal ringtone 20

Phone lock 78

Phonebook 26

check memory 30

Picture editor 17

WAP 59

Magic word 33

Melodies, see Ringtones 19

Silent ringtone 20

Index

SIM card 11

copy contacts 30

unblock 77

Turning the phone on 6

Turning the phone on/off 6

Two voice lines 39

SIM card lock 77

SMS, see Text messages 43

Sony Ericsson

Vibrating alert 21

Voice answering 32

Voice control 31

Voice dialing 32

Voice mail 35

web site 79

Sound recorder 74

Special Needs 79

Speed dialing 30

Start-up picture 22

Stopwatch 70

Wallpaper 17

Synchronization 68

WAP 62

bookmarks 63

options 63

security 59

T9 Text input 14

Taking pictures 52

Templates 45

settings 55

settings (manual) 56

settings (text message) 55

settings (wizard) 56

Warranty 85

Text formatting 44

Text messages 43

Email gateway 57

Themes 16

Time settings 21

Timer 70

TTY 79

Phone Number 79

Index

www.S onyEricsson.com

S ony E ricss on Mobile C ommunications AB , S E -221 88 Lund, S weden

AE/LZT 123 1751 R 2A. Printed in Malaysia

Yamaha VCD 120K User Manual
Sony Xperia tipo 12640775 User Manual
Seagate MOMENTUS ST9640423ASG User Manual
Seagate Momentus ST9160821SB User Manual
Seagate MOMENTUS ST92811A User Manual
Samsung SGH A226R User Manual
Research In Motion Blackberry Cell Phone MAT 14956 001 User Manual
PowerLogix COM128 User Manual
Philips Docking Entertainment System DC6210 User Manual
Pantech C530 User Manual