Sony CMD Z7 User Manual

3-233-439-12(1)  
Mobile Telephone  
Operating Instructions  
GB  
CMD-Z7  
© 2001 Sony Ericsson Mobile Communications AB  
Safety Precautions  
Do not use your phone in an aircraft,  
hospitals, petrol stations, or in places where  
mobile phones are prohibited.  
Use only Sony Ericsson Mobile  
Communications AB-approved CMD-Z7  
batteries and accessories with your phone.  
Do not touch the External Antenna  
Connector. Use always Sony original  
accessories.  
Note that in some countries using a cellular  
phone without a hands-free kit while  
driving is not allowed.  
Do not expose your phone to extreme  
conditions such as high humidity/rain, high  
temperatures, direct sunlight, caustic/harsh  
chemicals or dust.  
Do not put your mobile phone in a  
microwave oven; this may cause damage  
either to the oven or the phone.  
Do not allow children to play with your  
phone.  
Take special care in the disposal of your  
battery, using a special facility where  
available. Do not puncture, burn, or short  
circuit your battery.  
Limit the distance between the mains  
socket and the phone when charging for  
easy accessibility.  
Consult your physician or the manufacturer  
of personal medical devices (pacemakers,  
hearing aids. etc.) regarding any restrictions  
on the use of a mobile telephone.  
3 GB  
Warning  
Unauthorised batteries, chargers, and  
accessories will invalidate any approvals  
and warranty given for your phone and may  
be dangerous.  
Do not damage or puncture your battery  
pack with a sharp object.  
For use in the car, please connect your  
GSM mobile phone to an external antenna.  
The external antenna can be connected to  
your mobile phone via the appropriate  
accessory, e.g. Hands-free Kit. Please  
contact your car manufacturer concerning  
the appropriate position of the external  
antenna on your car.  
This carton’s top layer is made from 85% recycled paper, fluting and inner layer are made  
from 100% recycled paper.  
Halogenated flame retardant not used in cabinets.  
Halogenated flame retardant not used in printed wiring boards in main portions.  
Lead free solder is used for soldering in certain portions.  
4 GB  
Table of Contents  
Welcome to Sony CMD-Z7 . . . . . . . . 7  
Basic Operation . . . . . . . . . . . . . . . 16  
Making Calls (Saving Phonebook Entries) . . . . 16  
Voice Dialing . . . . . . . . . . . . . . . . . . . . . . . . . 17  
Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . 18  
Answering/Ending Calls . . . . . . . . . . . . . . . . . . 19  
During a call . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20  
What’s Included in Your Kit . . . . . . . . . . . . . . . . 7  
Quick Reference . . . . . . . . . . . . . . . . . . . . . . . . . . 7  
Basic Features of Your Phone . . . . . . . . . . . . . . . 8  
Advanced Jog Dial . . . . . . . . . . . . . . . . . . . . . . 8  
Loudspeaker . . . . . . . . . . . . . . . . . . . . . . . . . . . 8  
The Voicemail Key . . . . . . . . . . . . . . . . . . . . . . 8  
Manner Mode . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Icon Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . 9  
Menu Overview . . . . . . . . . . . . . . . . . . . . . . . . 11  
Applications Menu . . . . . . . . . . . . . . . . . . . . . 11  
Entering Text . . . . . . . . . . . . . . . . . 22  
Standard Text Entry . . . . . . . . . . . . . . . . . . . . . . 22  
T9 Text Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . 23  
Phonebook . . . . . . . . . . . . . . . . . . . 24  
Phonebook Organisation . . . . . . . . . . . . . . . . . . 24  
Saving Phonebook Entries from Standby Mode 24  
Making Calls from the Phonebook . . . . . . . . . . 24  
Phonebook Menu . . . . . . . . . . . . . . . . . . . . . . . . 25  
Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27  
Editing the Phonebook . . . . . . . . . . . . . . . . . . . . 27  
Getting Started. . . . . . . . . . . . . . . . 12  
Inserting the Battery Pack . . . . . . . . . . . . . . . . . 12  
Inserting the SIM Card . . . . . . . . . . . . . . . . . . . . 12  
Charging the Battery Pack . . . . . . . . . . . . . . . . . 13  
Switching on Your Phone . . . . . . . . . . . . . . . . . . 14  
Connecting to the Network . . . . . . . . . . . . . . . . . 15  
5 GB  
Menu Operations . . . . . . . . . . . . . . .29  
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30  
Sounds . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34  
Voice Memo . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36  
Divert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43  
Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45  
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46  
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47  
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48  
E-mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49  
Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52  
WAP Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . 54  
Applications Menu Operations . . . . . . . . . . . . . . 58  
Appendix . . . . . . . . . . . . . . . . . . . . .59  
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . 59  
Unblocking the SIM Card . . . . . . . . . . . . . . . . . . 61  
Technical Specifications . . . . . . . . . . . . . . . . . . . 61  
Declaration of Conformity . . . . . . . . . . . . . . . . . 62  
Index . . . . . . . . . . . . . . . . . . . . . . . .65  
6 GB  
Welcome to Sony CMD-Z7  
What’s Included in Your  
Kit  
The kit should include one mobile phone, one  
standard battery, one charger and this manual.  
If one of these parts is missing, please contact  
your retail dealer immediately.  
Quick Reference  
1
q
q
qf  
2
3
4
qg  
qk  
7
8
9
0
qa  
qh  
qj  
5
6
ql  
1
2
qa  
qx  
Ear piece  
On/Off Key  
Call End Key  
External Antenna  
Connector  
Advanced Jog Dial  
3
4
5
6
7
8
9
qc  
Voice Mail Key  
Keypad  
Microphone  
Flip  
Display  
Send Key  
Memo Key  
Headset Connector  
Finger Stop  
Loudspeaker  
qf  
qg  
qh  
qj  
qk  
ql  
Battery Cover  
Charging Indicator  
Battery Release Button  
External Connector  
(Charging and  
0 Clear Key  
Accessories)  
7 GB  
     
Loudspeaker  
Basic Features of Your  
Phone  
During a call, press the Jog Dial backward  
and select Loudspeaker to turn the  
loudspeaker on/off.  
Advanced Jog Dial  
The Jog Dial provides fast and easy menu  
navigation with only one hand.  
The Voicemail Key  
Press and hold  
(see also page 27).  
to access your Voicemail  
Operation  
Function  
Rotate  
Opens Phonebook in  
Standby Mode. Scrolls  
through menu options.  
Press  
(Click)  
Opens Menu in Standby  
Mode. Selects an option  
(highlighted) in the  
display.  
Press and  
Hold  
Dials the Phone  
Number selected.  
Press  
forward  
Exits from one menu to  
the previous screen.  
Also ends a call.  
Press  
backward  
Opens the “pop up  
menu”.  
8 GB  
           
Manner Mode  
Icon Glossary  
Icon Explanation  
In standby mode when the flip is closed,  
press the Jog Dial backward to activate/  
deactivate the manner modes.  
Network not available  
Once selected, it is possible to switch  
among the manner mode functions. All  
manner mode icons appear in the display;  
rotate the Jog Dial to select one:  
Network signal strength (strong)  
Battery strength  
SMS (Envelope Icon)  
Voicemail  
Silent Mode : turns the ringer and  
all tones to silent mode.  
Single beep  
discrete single beep.  
: ringer is restricted to a  
Alarm  
Silent Mode  
Vibra Alert  
ringer.  
: Vibra Alert without the  
Vibra Alert  
Outdoor Mode  
: turns the ringer and  
Single Beep  
all tones to the maximal volume.  
Outdoor Mode  
Ringer off  
Missed calls  
Incoming call barring  
Outgoing call barring  
9 GB  
         
Icon Explanation  
Incoming + Outgoing call barring  
Icon Explanation  
Paste  
Conditional Divert  
Unconditional Divert  
Active call  
Call hold  
Mute Microphone  
Headset connected – active call  
Handsfree kit connected  
(auto answer on)  
Loudspeaker on  
Conversation Privacy (ciphering) not  
supported  
Search  
Press the Jog Dial backward (pop-up  
menu)  
T9 (Text editing system)  
10 GB  
Menu Overview  
Press the Jog Dial from standby mode to  
access the Main Menu:  
Applications Menu  
Press the Jog Dial backward from standby  
mode to access the Applications menu:  
WAP  
page 54  
E-mal  
Games  
page 49  
page 48  
Messaging  
Read  
page 30  
page 34  
WAP  
page 54  
Read  
Send  
Settings  
Hoe  
Favourites  
Settings  
Home  
Favourites  
Settings  
Create  
Settings  
Local Area Info  
Scheduler  
Calendar  
page 52  
page 46  
Sounds  
Black Jack  
Table Soccer  
Ringer  
Set Sound  
Extras  
Voice Memo  
Settings  
page 35  
page 36  
Clock  
alculator  
Game
E-Mail  
Preferences  
Security  
Call Data  
Call Settings  
Call History  
Outgoing Cals  
pge 45  
page 24  
Inomig Calls  
issed Calls  
elete All  
Divert  
pae 43  
All Calls  
If Not Reachable  
If No Reply  
If Busy  
All Fax  
All Data  
Phonebook  
Phonebook Menu  
Voicemail  
Search  
Cancel All  
11 GB  
     
Getting Started  
To remove the Battery Pack  
First power off and wait until the display goes  
blank. Remove the cover and pull the knob of  
the battery up to remove the battery.  
Inserting the Battery  
Pack  
1
Unwrap the battery pack.  
2
Press the battery cover release button and  
slide down to remove the cover.  
If you insert a new battery, please reset the clock.  
3
4
Align the claws on the battery terminal  
with those of the phone and press battery  
down.  
Inserting the SIM Card  
Your SIM card contains a computer chip with  
your service details and phone number. Like a  
credit card, it should be kept securely and  
handled carefully. Do not bend, scratch or  
expose to moisture. Avoid static electricity.  
Align the claws at the side of the cover  
with the phone and slide back into the  
phone until the lock clicks into place.  
To avoid corrupting the memory of your SIM card,  
always switch off your phone before removing or  
inserting your SIM card.  
12 GB  
         
1
2
Remove the battery cover and the battery.  
Charging the Battery  
Pack  
As supplied, your battery pack will not be  
fully charged.  
Slide out the SIM card holder by pulling  
the knob on the holder.  
1
2
Plug the charger into a mains socket.  
Plug the charger into the bottom (jack) of  
the phone.  
3
4
5
Insert SIM card into the holder.  
Slide the holder back into the phone.  
Replace the battery and the cover.  
To remove the SIM card  
Follow steps 1 to 5 above removing the SIM  
card from the holder in step 3.  
13 GB  
       
Removing the charger from the phone:  
Use only the Sony-specified CMD-Z7 battery  
pack and charger.  
Disposal advice: Take special care in the disposal  
of the battery, using special facilities where  
available.  
1
2
Usage time  
When your battery pack is nearly empty, the  
battery icon in the display flashes and a beep  
indicates that approximately 1 minute of talk  
time remains.  
Both the status bar within the battery icon  
in the display and the charging indicator (red  
light) show the charging status.  
Charging (0°C-45°C) is complete when the  
battery icon displays all bars, is no longer  
blinking and the charging indicator (red light) is  
off.  
Full charging can take up to approx. 3 hours, but  
may vary depending on certain conditions, (e.g. if  
your phone is switched on or temperature is  
outside the operating range.)  
When your battery pack is completely empty, it  
can take some time until the battery icon appears  
when charging.  
As an energy-saving measure, disconnect the  
charger from the mains socket and from the  
phone after charging.  
On exposure to high temperatures your battery  
may expand slightly. This has no influence on  
your safety/health and will reduce in size once re-  
exposed to a lower temperature.  
Switching on Your Phone  
To switch on/off your phone, press and hold  
.
Entering PIN (Personal  
Identification Number)  
Enter your PIN using the  
number keys (the PIN  
appears in code as ****)  
and press the Jog Dial (or  
) to confirm.  
14 GB  
   
If you do not enter a PIN code, your phone  
will automatically switch off after a few  
minutes. It is possible but not recommended  
to disable the PIN code prompt (see page 38).  
If you cannot obtain service  
If you cannot obtain network service the  
reception strength may be too weak. Move  
to a higher elevation, a window or an open  
space and make sure that there is nothing  
obstructing the antenna.  
Connecting to the  
Network  
After successfully entering your PIN code,  
your phone searches for an available GSM  
network. The network search is automatic and  
may take a few seconds.  
You are ready to make and receive calls when  
the network operator's name and the signal  
strength icon appears on the display.  
Once you have switched on your phone do  
not cover the internal antenna area above  
the finger Stop with your hand.  
Roaming  
If you are out of range of your Home”  
Network Operator, especially when abroad,  
another Network Operator may be selected  
automatically, subject to signal strength and  
roaming agreements between network  
operators.  
The following indicates the strength of the  
received network signal. If the signal is very  
weak, there is a risk of losing service.  
StrongsignalWeak signal Network not  
available  
15 GB  
         
Basic Operation  
4
Press the Jog Dial and select Save to save  
the number to the Phonebook.  
Making Calls (Saving  
Phonebook Entries)  
If the  
option is on (see page 42) and the  
Auto Redial  
number you have called is engaged, your phone  
automatically displays the option.  
Dialling a Number  
Auto Redial  
1
Dial the complete  
number of the party  
you want to call  
Choosing a Phonebook entry  
(including the area  
code even when  
1
Rotate the Jog Dial in standby mode to  
open the Phonebook.  
dialling locally). In  
case of International  
Calls, press and hold  
appears. Then enter the country code,  
followed by the area code and the  
number.  
2
Use the Jog Dial to display the ABC sort  
list. (If there are several numbers stored  
for one persons name, select one of them  
using the Jog Dial.)  
until +”  
3
Press and hold the Jog Dial (or press  
to call the number displayed.  
)
2
3
Press  
hold  
to correct any errors. Press and  
to clear the entire number.  
To search the Phonebook, press an alphanumeric  
key on the keypad to advance to that letter in the  
Phonebook. (E.g. to advance to entries beginning  
Press and hold the Jog Dial (or press  
to call the number displayed or  
)
with M, press  
.)  
16 GB  
   
Creating the Voice Tag Entries  
Voice Dialing  
Voice Dialing makes dialing Phonebook  
entries easy. Simply press and hold the Jog  
Dial and say person's name (Voice Tag) in the  
phone's microphone. Once the phone  
recognizes the Voice Tag, the phone  
automatically dials after 2 seconds (the 2-  
seconds gives you time to cancel your call by  
pressing the Jog Dial or End Key).  
It is necessary to set up the Voice Tag in  
advance to use the Voice Dialing option (see  
Creating the Voice Tag Entries, page 17).  
You can save up to 10 Phonebook entries with  
a Voice Tag.  
1
Rotate the Jog Dial in standby mode to  
open the Phonebook and select the name  
to which you want to attach a Voice Tag  
and press the Jog Dial.  
2
3
Rotate the Jog Dial to select the name  
again and then Voice Tag.  
Select the respective icons to Record  
(
), Stop ( ), Play ( ), Save ( ) or  
Delete ( ) a Voice Tag.  
4
Repeat step 3 after the message Once  
Again.  
Once you have assigned 10 Voice Tags, it is neces-  
sary to follow the procedure above and in step 3  
choose  
to delete a Voice Tag. Then select  
Delete  
another name from the Phonebook and follow the  
procedure to assign the Voice Tag to a new entry.  
17 GB  
     
Editing a number  
Speed Dialing  
Follow steps 1-3 in Creating the Speed  
Dialing Entries(see page 18). In step 2,  
select one of the following options:  
} Call to call the number.  
The Speed Dialing option allows you to  
speed dialyour chosen number by pressing  
and holding the corresponding key and then  
press Call. To use the Speed Dialing option it  
is necessary to assign a key to a number in  
advance. You can assign up to 8 keys using  
} View to display the number.  
} Edit Number to change the number.  
} Delete to delete the number.  
keys  
to  
only (  
is reserved for  
voicemail, see page 27).  
Creating the Speed Dialing Entries  
Speed Dialing Entries can only be saved to your  
phone memory.  
1
Press and hold the key that you want to  
assign a number to.  
2
Enter the phone number using the keypad  
or by pressing the Jog Dial backward to  
select from Phonebook entries.  
3
Press the Jog Dial to confirm.  
18 GB  
     
Flip Call  
Answering/Ending Calls  
When Flip call is set (see page 42) and you  
receive a call, you can accept it by opening  
the flip cover. Close the flip cover to end the  
call.  
When the flip is open  
Press the Jog Dial (or  
) to accept the call.  
When the flip is closed  
When the Headset is connected to your  
phone, answer a call by pressing the Headset  
button (beep). Press and hold the Headset  
button to end the call (2x beep).  
Press the Jog Dial to accept the call.  
If you do not wish to answer the call, press  
or press the Jog Dial backward and select  
Busy  
while the phone is ringing. The call will then be  
rejected (the caller will hear a busy tone (network  
dependant) or will be diverted if a divert has been  
set).  
Connect/disconnect the headset only when  
the phone is switched off or in stand-by mode.  
If a call is not answered,  
line of the display.  
appears on the top  
Select the  
from the Main Menu for  
Call History  
information about the missed call.  
In very rare cases, ciphering does not work in  
some networks, meaning that third parties can  
listen to your phone call. In this case,  
on the display.  
appears  
) to  
Press the Jog Dial forward (or press  
end a phone call.  
19 GB  
       
Call Hold  
During a call  
Use Call Hold to manage two calls at the same  
time.  
Adjusting the Ringer/Speaker  
Volume  
During an incoming call, rotate the Jog  
Dial to adjust the ringer volume.  
One active call  
1
Press the Jog Dial backward and select  
Call Hold.  
During a call, rotate the Jog Dial to adjust  
the speaker/earpiece volume. (Rotate up =  
increase volume/Rotate down = decrease  
volume)  
2
3
Press the Jog Dial to confirm.  
Press the Jog Dial again to access the  
Phonebook to retrieve a number (or use  
the keypad to enter a number).  
Use your phone as a Notepad by entering a phone  
number during a call. When ending the call, the  
number entered will reappear on the display. Use the  
Jog Dial to save the number in the Phonebook or to  
call the number.  
4
Press and hold the Jog Dial or  
make a call.  
to  
By pressing  
or using the Notepad to make a  
second call, you can put a call on hold automatically.  
Call Menu  
Press the Jog Dial backward during a call for  
the following options:  
End All Calls  
Choose End all Calls or press  
to end  
multiple calls.  
20 GB  
     
Send DTMF  
Choose this option for sending DTMF tones,  
e.g. when using Voicemail or other services.  
2
} Swap to put the active call on hold and  
connect the waiting call (in case of one  
active call and one waiting call)  
or  
} Busy to indicate to the calling party that  
your line is engaged.  
Press and hold  
to clear the number and then  
press  
to exit this option.  
or  
Mic Off/Mic On  
} Replace to end the active call and  
retrieve the call waiting.  
Choose the Mic Off/Mic On option to mute  
and unmute the microphone.  
When the Headset is connected to your  
phone, answer a waiting call by pressing the  
Headset button (beep). In case of one active  
call and one call on hold, alternate between  
the active call and the call on hold by pressing  
the Headset button (beep).  
Loudspeaker  
Turn the loudspeaker on/off. For best results  
when using the loudspeaker, place the phone  
on a flat surface approx. 0.5 m distance from  
you.  
Main Menu  
Conference call  
Return to the Main Menu.  
A call with more than 2 participants. To set up  
a conference call, press the Jog Dial backward  
to open the Call menu and select Join.  
One active call (and/or one call on  
hold) and one call waiting  
When your phone alerts you (beep) that a call  
It is possible to talk with maximum of 5  
callers (network dependant).  
is waiting, there are several options available:  
1
The display automatically offers you call  
waiting options.  
21 GB  
         
Entering Text  
Example: To enter swhen creating  
a message:  
You have the possibility to enter characters:  
Standard Text Entry using the keypad.  
1
2
Proceed as in Create (see page 31), then  
Standard Text Entry using the Jog Dial.  
Press  
. A character or number  
Text Entry using the T9 fast text entry  
method.  
appears.  
3
4
Rotate the Jog Dial to s.  
Standard Text Entry  
Press the Jog Dial (or wait) to confirm.  
Using the keypad  
Press the corresponding alphanumeric key  
multiple times until the desired character  
appears.  
Press  
to shift among:  
lower case letters permanently  
upper case letter and then revert back  
to lower case  
Using the Jog Dial  
upper case letters permanently  
numbers  
Press a key once and then rotate the Jog Dial  
until the desired character appears. Press the  
Jog Dial or wait for a moment to confirm.  
Press and hold  
function (see page 23).  
Press  
to clear the character or number just  
before the cursor. To clear the entire text, press  
and hold  
to activate/deactivate the T9  
.
22 GB  
   
T9 Text Entry  
Sample entry with T9 Text Entry:  
If the word you intended to type does not appear in  
the list, press and hold to switch to multi-tap  
mode and type the word using the standard text  
entry method (see page 22). When finished, press  
1
2
Proceed as in Create (see page 31), then  
and hold  
to return to T9 mode. This new word  
In step 3, press and hold to switch to  
T9 mode if does not appear (or press  
the Jog Dial backward and select T9).  
will automatically be added to the T9 memory and  
will appear in T9 mode next time.  
Adding a symbol or punctuation  
To insert a symbol when creating a message.  
3
4
Press  
.
to shift to  
1
2
Press  
.
To type the word  
Sony, press each of  
the following keys in  
Use the Jog Dial to scroll from row to  
row.  
order:  
.
,
,
,
3
4
Press the Jog Dial to select a row.  
Rotate the Jog Dial to scroll within the  
row.  
5
6
At the end of the word, check the preview  
bar for the possibilities found for the key  
combination you typed.  
5
Press the Jog Dial to select a symbol.  
Rotate the Jog Dial to select Sony. If  
your desired word is first on the list, just  
press the Jog Dial to select it (or press  
to enter a space and proceed with the  
next word).  
For Smart Punctuation, just press  
would add a fullstop, hyphen or apostrophe. T9 will  
automatically insert the most likely punctuation.  
where you  
23 GB  
   
Phonebook  
Phonebook Organisation  
Your Phonebook is organised in the following  
sections:  
Phonebook Menu  
Saving Phonebook Entries  
from Standby Mode  
See page 16 Basic Operation Making Calls  
(Saving Phonebook Entries)and page 25  
Creating Entries in the Phonebook.  
Voicemail (if it is set, see page 27)  
Search  
Making Calls from the  
Phonebook  
Customised Phonebook of priority entries  
(entries 1-9)  
See page 16 Basic Operation Making Calls  
(Saving Phonebook Entries).  
Alphabetically-ordered Phonebook (sorted  
in alphabetical order)  
24 GB  
           
Call, Edit, Delete, Copy Own Number  
See page 27 Editing the Phonebook.  
Phonebook Menu  
Own Number  
Creating Entries  
The first entry in the Phonebook Menu is a  
place holder for your own numbers, where  
you can make one or more entries to store  
your own mobile number, etc. Depending on  
your SIM card, you can save multiple own  
number entries (including 3 numbers in the  
phone).  
1
2
} ‘ Phonebook  
} Phonebook Menu  
} New Entry  
} SIM to save the entry  
to the SIM card  
memory or  
} Phone to save to the  
phone memory.  
Display Own Number  
1
2
3
} ‘ Phonebook } Phonebook Menu  
} Own Number  
3
4
5
Rotate the Jog Dial to select the Number  
Type Icon and press the Jog Dial.  
Rotate the Jog Dial to select the name of  
the own number.  
Enter the phone number. Press Jog Dial to  
confirm.  
Press the Jog Dial and then choose View  
to display the number (Select OK or press  
to exit).  
Enter a new name. Press the Jog Dial to  
confirm.  
Enter Own Number  
To save an own number entry follow steps 1-3  
and then select an empty memory space using  
the Jog Dial. Press the Jog Dial and enter the  
number at the prompt.  
25 GB  
         
FDN Phonebook  
When saving the Phonebook entries to the SIM  
card, the number of memory spaces depends on  
your SIM card.  
When saving the Phonebook entries to the Phone  
memory, you can make up to 500 entries (up to  
20 characters for each name and up to 40 digits  
for each number.)  
This section may contain Fixed Dialling  
Numbers (SIM card dependant). To add an  
entry to the Fixed numbers rotate the Jog Dial  
down to New Entry in the FDN Phonebook  
and proceed as in Creating Entries in the  
Phonebook. You can call, edit, delete and  
copy the FDN Phonebook (see Editing the  
Phonebook). You need the PIN2 code to  
edit, delete and copy.  
To assign a group, select an entry from the  
Phonebook and select  
. Use the Jog  
No Group  
Dial to scroll and then select a group.  
Voice Tag  
The FDN Phonebook and Service Dialing  
Choose this option to display the list of Voice  
Tag entries if a Voice Tag is set. (See also  
Voice Dialing, page 17.)  
are SIM card dependant.  
Numbers  
The Service Dialing Numbers cannot be  
modified.  
Service Numbers  
This section of the Phonebook may contain  
Service Dialling Numbers (SIM card  
dependant). Service Dialling Numbers cannot  
be edited.  
26 GB  
   
Voicemail  
Search  
} ‘ Phonebook } „ Search  
It is possible to search By Name or By Group.  
Press and hold  
Voicemail.  
for quick access to your  
When opening the phonebook, press and hold  
to display the list of groups and  
global search.  
to access to a  
Set up your Voicemail  
1
2
3
} ‘ Phonebook  
} § Voicemail  
Editing the Phonebook  
Enter the number at  
the prompt.  
Use this option for calling, editing, deleting or  
copying phonebook entries. The editing of  
entries is possible by Name, Number or by  
Note.  
Press the Jog Dial to  
confirm your entry.  
After you have set up your Voice Mail, any  
editing of the number can be made via the  
Phonebook (see also page 27 Editing the  
Phonebook).  
Editing a Name/Number  
1
2
} ‘ Phonebook  
Rotate the Jog Dial to select the name/  
number you want to edit and press the Jog  
Dial.  
The Voicemail icon (§) or the envelope icon  
(depending on the network) appears in the  
display to inform you when you have received  
new voice messages.  
3
Press the Jog Dial for a menu of editing  
options:  
27 GB  
           
Editing Note  
Name editing options:  
The Note is like a memo pad for additional  
information e.g. e-mail addresses or postal  
addresses in the Phonebook.  
} Edit Name to change the name.  
} Voice Tag to edit the Voice Tag entry.  
1
Follow steps 1-3 in Editing a Name/  
Number(see page 27).  
} Delete Entry to erase the name from  
the Phonebook.  
2
3
Select the Note entry you want to edit.  
} Copy Entry to copy the entry from one  
memory location to another.  
Press the Jog Dial for a menu of editing  
options.  
} View to see the complete name.  
Number editing options:  
} Call to call the number.  
} Edit Icon to change the icon.  
} Edit Text to change the content.  
} Delete to delete the content from the  
Phonebook.  
} Edit Type to change the type of  
number (e. g. Mobile, Fax, etc.).  
} Copy to copy the entry from one  
memory location to another.  
} Edit Number to change the number.  
} Delete to erase the number from the  
Phonebook.  
} View to view the content.  
4
Press the Jog Dial to confirm your  
selection.  
} Copy to copy the number from one  
memory location to another.  
} View to display the number.  
4
Press the Jog Dial to confirm the  
selection.  
28 GB  
 
Menu Operations  
option on  
tion off  
Selecting a menu item with the  
short-cut key  
You can go to each menu by pressing the  
Selecting a menu item with the  
Jog Dial  
short-cut key (  
menu.  
-
) from the main  
1
Press the Jog Dial to select the Main  
Menu from standby mode and rotate the  
Jog Dial to scroll through the menu  
options.  
Messaging  
Sounds  
Settings  
Phonebook  
Extras  
Voice memo  
Divert  
2
3
Press the Jog Dial to select the menu  
option in the centre.  
Call History  
Scheduler  
Press the Jog Dial forward (or press  
to exit a menu.  
)
WAP  
Your phone automatically defaults to standby mode  
after approximately 10 minutes of inactivity.  
29 GB  
 
Messaging  
This feature offers  
correspondence options to  
read, write and send short  
messages (SMS).  
The capacity for storing incoming and outgoing  
messages depends on your SIM card and the  
phone memory.  
The message memory is full when blinks in  
the display.  
Memory Full appears if you try to save a message  
when the memory is already full. Delete old  
messages in order to free memory space for new  
messages.  
Read Message  
When a new message  
arrives, you will hear a beep which sounds  
different from the single beep of the ringer  
and see in standby mode.  
Select Delete All to clear all messages.  
To Delete a Message  
1
Follow steps 1-3 in Read Message(see  
page 30) and select Delete.  
1
} “ Messaging } Read } Inbox  
(} Outbox to read sent messages.)  
2
After selecting the message you want to  
delete, select Yes.  
2
Scroll through the list of messages to  
select the message you want to read and  
press the Jog Dial to confirm. The  
message appears on the display.  
3
Press the Jog Dial for options to Delete,  
Reply, Forward or Call Back the number  
in the text.  
30 GB  
       
To Reply or Edit a Message  
Create  
Choose Create to create and send a message.  
1
Follow steps 1-3 in Read Message(see  
page 30) and select Reply.  
1
2
} “ Messaging } Create  
2
Choose Text Only or Text, Attach (reply  
the text with attachment).  
Choose Text Only or Text, Attach (write  
the text with a picture/sound message).  
3
4
Edit the message and press the Jog Dial.  
3
Create your message.  
Select Send (or Save, Cancel, Settings)  
and press the Jog Dial to confirm your  
selection.  
} Text Only: Enter the message text.  
} Text, Attach: Add an attachment and  
enter the message text.  
To Forward a Message  
Follow steps 1-3 in Read Message(see  
page 30) and select Forward.  
4
When creating your message, press the  
Jog Dial backward for the following  
options:  
T9 On/Off, Change Language, Time,  
Date, Phonebook, Template,  
Last Message, Char. Timer  
To Call Back the Sender of a  
Message or a Number in the  
Message Text  
1
Follow steps 1-3 in Read Message(see  
page 30) and select Call Back.  
5
Press the Jog Dial to confirm. Select  
Enter Number or choose one of the names  
from the Phonebook. Before sending, you  
are given the following options:  
2
Select the number you want to call back  
from the number(s) appearing in the  
message, then call the number.  
Send, Save, Cancel, Settings  
31 GB  
         
Memory Class  
If you are interrupted (e.g. incoming call) while  
creating a message, select to  
retrieve the message and complete it continuing  
from step 4 above.  
You have the following options:  
SIM to save the message on the recipient's  
SIM card.  
Last Message  
The picture image and sound message can only  
be sent and received among Sony mobile phones  
supporting this feature.  
Phone to save the message in the recipient's  
phone.  
Screen to display the message directly on  
the recipient's display (without saving to  
the SIM or to the phone). It is not  
recommended to send confidential  
messages using the screen option.  
SMS list icons indicate the  
properties of the message  
Received message (unread)  
Received message (read)  
Validity Period  
Specify how long messages are stored in the  
service center by selecting: 1 Hour, 6 Hours,  
24 Hours, 1 Week, 4 Weeks. The default  
validity period is 1 Week (network  
dependant).  
Settings  
} “ Messaging } Settings  
Settings allows you to customise outgoing  
messages including the format, confirmation  
report, etc.  
Reply Cost  
Select On if you would like to pay for the  
recipient to respond to your message. (This  
option is network dependant.)  
32 GB  
     
Result Report  
Local Area Info  
} “ Messaging } Local Area Info  
Select On if you would like to receive  
confirmation that your messages are  
transmitted to the recipient successfully.  
Receive Cell broadcast messages or general  
messages like weather reports, traffic reports,  
etc. broadcast to a group of phones in a certain  
area. Some of these options may be network  
dependant.  
Message Format  
Specify how your message is transmitted:  
SMS, E-Mail, Fax, Telex, Voice (if available).  
The default setting is SMS.  
1
2
} “ Messaging } Local Area Info  
Service Centre  
Before you can send short messages, register  
Select one of the following options:  
your Service Centre number via the Service  
Centre option in the Messaging menu.  
} Received to view cell broadcoast  
messages.  
} Select Channel to add or delete a  
broadcast channel.  
Signature  
You can create your own signature of up to 32  
characters, and choose whether or not to  
attach it when you send SMS.  
} Receive? to choose whether or not to  
receive Cell broadcast messages.  
} Tone to enable/disable a tone to indicate  
that you have received a cell broadcast  
message.  
3
Press the Jog Dial to confirm your  
selection.  
33 GB  
       
My Ringers  
Sounds  
It is possible to record own  
ringer sounds using the  
phones microphone.  
Choose the respective  
Icons to Record ( ),  
Stop ( ), Play ( ),  
Choose Sounds to access any sound-related  
option in your CMD-Z7, for example ringer  
melodies, ringer volume, enable/disable  
sounds, and record your own ringer melodies  
or other sounds.  
Save ( ) or Delete (  
a ringer melody.  
)
Ringer  
} ” Sounds } Ringer  
Set Sound  
} ” Sounds } Set Sound  
Ringer Volume  
Choose from four ringer volume levels or turn  
the ringer off.  
Choose Set Sound to access the following  
sound options:  
appears in standby mode to remind you when  
the ringer is turned off.  
Event Sounds  
Assign a sound to be heard at the following  
actions of your CMD-Z7: Receive SMS,  
Alarm, Scheduler Alarm, Power Up and  
Power Down.  
Ringer Type  
Select from among different ringer melodies.  
It is possible to record sounds using the  
phones microphone.  
Group Ringer  
Assign a ringer sound to the different groups  
saved in your Phonebook. It is not possible to  
assign a ringer melody to a single name/  
number.  
34 GB  
       
Key Click  
Voice Memo  
Select Voice memo to record and play the  
voice memo.  
Choose the respective Icons to Record ( ),  
Stop ( ), Play ( ) or Delete ( ) a voice  
memo.  
} Key Click to turn the key click sound on/off.  
} DTMF to turn the DTMF tones on/off. DTMF  
tones are designed to respond to menu  
prompts when pressing a key.  
} Silent to turn off the key click sound on/off.  
Error Tone  
In standby mode, you can play back memos by  
pressing  
In standby mode, you can record a memo by  
pressing and holding  
You can record a conversation during a call by  
pressing  
Select Error Tone to assign a sound to the  
error tone. Choose from a default error tone or  
recorded sounds (only if you have sounds  
stored under My Sounds).  
.
.
.
My Sounds  
Select My Sounds to record own sounds using  
the phone's microphone. Choose the  
respective icons to Record ( ), Stop ( ),  
Play ( ), Save ( ) or Delete ( ) a sound.  
You are responsible for the confidentiality of the  
recording.  
You must ask the person you are on the phone  
with for permission before recording.  
35 GB  
       
Settings  
Item  
Default  
Page  
*
Language  
Greeting  
SIM dependent 37  
Preferences  
} † Settings } Preferences  
Off  
37  
37  
37  
37  
37  
Choose Preferences to personalise your  
phone according to your preferences, e.g.  
which language, backlight on/off, etc.  
When you receive your phone, it has the  
following default settings:  
**  
Wallpaper  
Backlight  
LCD Contrast  
On  
0
Select Network Auto  
Preferred List SIM dependent 37  
Memory Info  
Factory Reset  
37  
38  
* default language depends on language of the Network  
Operator.  
**  
default wallpaper depends on Network Operator/  
Service Provider.  
36 GB  
   
Language  
} † Settings } Preferences } Language  
Select Network  
This feature gives you the option to select a  
network automatically when you turn on your  
phone, or manually from a list of available  
networks.  
Select the appropriate language.  
As a short cut, you can also select the language  
by pressing  
.
*#00(country code)#  
Select your default language by pressing  
Preferred List  
.
*#0000#  
Choose Preferred List to edit the automatic  
network selection priority list. This feature is  
helpful e.g. to prioritise roaming partners.  
Greeting  
The Greeting menu allows you to turn on/off  
or to edit the greeting message which appears  
when you turn your phone on.  
Add Network to add a network operator  
to the list.  
Wallpaper  
Select pictures as a wallpaper to appear on the  
display in standby mode.  
Move Network to adjust the order in  
which the names appear in the list.  
Delete Network to remove a network  
operator from the list.  
Backlight  
Choose Backlight to turn the illumination of  
the keypad and display on/off. Switch the  
Backlight off and your phone's battery charge  
will last longer.  
Memory Info  
To display how much memory is available for  
SIM, Phone and the Note area.  
LCD Contrast  
To adjust the contrast of your display.  
37 GB  
                               
Factory Reset  
After entering the PIN code incorrectly three times,  
your PIN is blocked. Enter the PUK (Personal  
Unblocking Key) to unblock your PIN.  
To perform a master reset of all of your  
phone's settings back to the factory settings  
except Phonebook, Schedule and Network/  
SIM card based settings. This will  
automatically restart your phone.  
After entering the PUK code incorrectly ten  
times, your SIM card is completely blocked and  
can only be unblocked by your Network  
Operator/Service Provider.  
If the PIN code is disabled, the risk of  
unauthorised use of your phone is greater. The  
disabling of the PIN control is SIM card  
dependant.  
Security  
} † Settings } Security  
The Security options allow you to control who  
uses your phone as well as their calling  
privileges. However, emergency calls (SOS)  
are always possible regardless of the  
restrictions/codes you set.  
PIN2 Code  
PIN2 is a code provided by your Network  
Operator/Service Provider and is required for  
access to some features such as FDN  
Phonebook or Call Cost. These features are  
not supported by all networks.  
PIN Code  
Select PIN code to enable/disable or change  
the PIN code. When the PIN code is enabled,  
your phone prompts you to enter the PIN code  
each time you turn on the phone. You can  
change your PIN code to any 4-8 digit  
number. Your PIN code can only be changed  
if the PIN control is switched on.  
38 GB  
           
Call Barring  
Limit calls made from your phone which can  
be useful e.g. if you lend your phone to  
someone else but to not want them to make  
international calls. The restrictions in the Call  
Barring menu require the barring password.  
Barring PWD  
Some of the restrictions in the Security menu  
are controlled in the network e.g. Call  
Barring. Your Network Operator/Service  
Provider provides a (Network) password if  
you register for one or more of these network  
call restrictions (Call Barring).  
All Outgoing  
Restrict all outgoing calls except emergency  
calls (112, etc.).  
Changing the Barring Password  
Select Barring PWD from the Security menu.  
Use the keypad to enter the old password and  
then enter your new password. Enter the new  
password again and press the Jog Dial.  
International  
Restrict all international calls.  
Int. Ex. Home  
If the message  
entered was incorrect. If you have difficulties, con-  
tact your Network Operator/Service Provider.  
appears, the old password you  
Invalid  
Restrict all outgoing international calls except  
those to your home country.  
All Incoming  
Restrict all incoming calls.  
Security Code  
The Security Code allows you to set a  
password to control access to your browser  
and E-mail. The default Security Code is:  
0000.  
If Abroad  
Restrict all incoming calls when you are  
outside of coverage from your registered  
Network Operator (e.g. when abroad).  
Cancel All  
Cancel all settings of the call barring service.  
39 GB  
       
Charge Rate  
Call Data  
} † Settings } Call Data  
Select Charge Rate to set the currency and  
price per unit which will be used to  
calculate the call cost.  
Track or control how long you are on the  
phone and the cost of calls made. So that Call  
costs can be used as a security measure e.g.  
when you lend your phone to someone, you  
must use your PIN2 as a security code when  
you set or change options.  
Enter your PIN2 code at the prompt. Enter  
a currency and the price per unit (to enter a  
decimal point, press  
).  
Charge Limit  
Select Charge Limit to set a unit figure at  
which your phone will not allow any more  
calls to be made. If Unit in the Charge Rate  
menu (see above) was selected, enter the  
Unit value. In case of Currency, enter the  
Currency value.  
Call Time  
Check the length of your last call and total  
calls (incoming and outgoing). Rotate the Jog  
Dial to select which call time you want to  
check.  
Then enter your PIN2 code at the prompt,  
then set the charge limit.  
Call Cost  
Check the cost of your last call, total calls,  
remaining credit and limit credit. Rotate the  
Jog Dial to select the cost you want to check.  
Reset Call Cost  
Select Reset Call Cost, enter your PIN2  
code and then reset the call cost.  
Reset Call Time  
Use the Jog Dial to reset the Call time.  
In order to be able to make phone calls again, reset  
the  
counter or enter a higher  
.
Charge Limit  
Call Cost  
Call Cost Setting  
Call Cost Setting offers a choice of three  
options:  
40 GB  
   
To make a line selection in standby mode,  
press and hold and use the Jog Dial to  
Call Settings  
} † Settings } Call Settings  
make your selection. 1 or 2 will appear so that  
you know which line is active. It is also  
possible to make the line selection using the  
Call Settings menu option.  
Some of the following features may not be  
supported by some networks.  
Caller ID  
Some menu items may not appear in your phone in  
some networks unless you specifically subscribe for  
Choose whether or not you want the party you  
are calling to see your telephone number.  
Select Caller ID from the Call Settings menu.  
Use the Jog Dial to select On, Off or Default  
(network default).  
them. The following settings (e.g.  
,
,
Divert Security  
) will apply  
,
and  
Ringer Tone Call Waiting  
Voicemail  
to the currently selected line. Some items such as  
your own number entry and voicemail entry may not  
be edited. All calls made will be billed to the cur-  
Call Waiting  
rently selected line. The  
and  
Call Time  
Call Cost  
If activated, your phone will alert you (beep)  
that a call is waiting so that you don't miss  
any calls. Select Call Waiting and use the Jog  
Dial to select Activate, Cancel or Check  
Status.  
settings however, will always show the total time or  
cost of both lines.  
Any Key Answer  
Answer a call by pressing any key on the  
keypad.  
Select Line  
Select Any Key Answer and use the Jog Dial  
to select On or Off.  
Some Network Operators offer the possibility  
to select between two separate phone lines on  
your SIM card. This is useful e.g. for  
separating business and private call costs.  
41 GB  
       
1 Minute Beep  
DTMF Tones  
Turn the 1 Minute Beep On (Off) to be (not  
be) reminded by a beep in 1 minute intervals  
of the time you are on the phone.  
DTMF tones are emitted when pressing a key  
during menu prompts (e.g. during Voicemail,  
etc.). Select On/Off to activate/deactivate this  
function.  
Auto Redial  
Automatic redial of an engaged line until it is  
no longer busy. Select On/Off to activate/  
deactivate this function. An incoming call  
will interrupt the Auto Redial feature.  
Data Services  
When connected to the optional Data  
accessories (also see their user manuals) your  
phone can send and receive data.  
This function can be restricted by your Network  
Operator/Service Provider.  
Selecting a Serial Speed  
Select Serial Speed and use the Jog Dial to  
select Automatic, or one of the following  
speeds: 115,2 Kbps, 57,6 Kbps, 38,4 Kbps,  
19,2 Kbps, 9,6 Kbps.  
Show Call Time  
Select On/Off to display/not display the  
elapsed time of your call.  
Select Automatic for automatic detection of  
the serial speed. Enter an ATcommand,  
whereafter the phone responds with OK.  
Auto Answer  
Automatic answer of an incoming call. Only  
works together with the Handsfree car kit  
accessory.  
Flip Call  
Flip call allows you to answer incoming calls  
by opening the flip cover and to end the call  
by closing it.  
42 GB  
           
In step 3, you also have the option to cancel  
or check status. Select Cancel to cancel the  
divert; then wait for the network response.  
Divert  
You may need to register for this service with  
your Network Operator/Service Provider.  
Select the option Check status to check the  
divert settings. Wait for the network  
response and then you can view the current  
status on the display.  
Setting a Divert  
1
2
3
} ° Divert  
Select a Divert option using the Jog Dial.  
If the returned response is Failed, the  
network was unable to set, clear or check  
the selected Divert.  
Select Activate to set the chosen divert  
condition.  
4
Select Voicemail to divert calls to your  
Voicemail or choose a number from the  
Phonebook. Choose Enter Number to  
enter the number manually using the  
keypad.  
appears in standby mode if a Divert is  
set.  
Sometimes a divert option is automatically  
set in the network.  
5
Wait for confirmation from the network.  
43 GB  
     
The Divert menu offers the following options:  
} All Data  
Divert all data calls (the phone will not even  
ring).  
} All Calls  
Divert all calls unconditionally (the phone  
will not even ring).  
} Cancel All  
Clear all active diverts.  
} If Not Reachable  
Divert incoming calls when your phone is  
switched off or out of network coverage.  
} If No Reply  
Divert incoming calls if you do not answer the  
call after a certain period of time.  
} If Busy  
Divert incoming calls when your are on the  
phone (line engaged).  
} All Fax  
Divert all fax calls (the phone will not even  
ring).  
44 GB  
Call History  
Caller ID (Caller Line Identification) is required  
to support Call History entries.  
When the Call History reaches its capacity, the  
oldest number is deleted automatically to provide  
space for the newest entry.  
Provides a record and quick access of up to 10  
of the last outgoing calls, up to 10 of the last  
incoming calls and up to 10 missed calls.  
(This feature is dependent on your Network  
Operator/Service Provider.)  
As a shortcut, you can also press  
mode to display the Call History.  
Outgoing call  
in standby  
1
2
} ’ Call History  
Incoming call  
Missed call  
Use the Jog Dial to choose one of the  
following options: Outgoing Calls,  
Incoming Calls or Missed Calls, then  
press the Jog Dial.  
3
Make a call by pressing and holding the  
Jog Dial on one highlighted name/  
number.  
In Step 2, select Delete All to delete all  
names/numbers.  
45 GB  
   
Alarm  
Extras  
It is possible to set, switch on/off or set the  
Alarm to ring at the same time every day  
(Repeat Daily). When the alarm is on,  
appears in the display in standby mode. If the  
phone is switched off, you will not hear the  
alarm.  
Choose the Extras menu to access the  
following sub-menus: Clock, Calculator,  
Games and E-Mail.  
Clock  
} ‡ Extras } Clock  
Timer  
World Clock  
To start and stop the timer at a certain time.  
Rotate and press the Jog  
Dial to select a city from  
the map (or press the Jog  
Dial backward to list  
cities) for the following  
options:  
When the timer is on,  
display in standby mode.  
appears in the  
The volume of the alarm/timer is determined by the  
ringer volume setting. If the ringer volume is off, the  
alarm/timer will ring at the minimum volume. The  
alarm/timer will still ring even during a call.  
} Set ¥ to change the home city.  
Clock Format  
Choose from the following clock formats: 24  
Hours, AM/PM, With Date, World Clock.  
Choose Off to have no date/time displayed in  
standby mode.  
} Set ® to change the foreign city.  
} Daylight Saving to switch between summer  
time and winter time.  
Clock Chime  
Choose from the following Clock Chime  
options: Beep, 8h-20h, Off.  
46 GB  
         
Set Date/Time  
1
2
3
} ‡ Extras } Calculator  
Use the Jog Dial and keypad to enter the day,  
month and year (DD/MM/YY) as well as the  
time in hours and minutes (HH/MM).  
Enter a number.  
Press  
to select the mathematical  
function and then enter another number.  
If you insert a new battery, please reset the clock.  
4
Press  
to select =for a result.  
In this example we are going to subtract 20%  
from 120.  
Calculator  
} ‡ Extras } Calculator  
The Calculator can perform addition (+),  
subtraction (-), multiplication (×), division  
(÷), and percentage (%) calculation.  
Currency Converter  
You can also use the  
calculator as a currency  
converter.  
Press  
to go through the mathematical  
operations of +, -, ×, ÷ in that order.  
Press  
the result.  
to clear the entered value and  
to start a new calculation while  
1
Enter a number into  
the calculator screen.  
Press  
using the calculator.  
2
Press the Jog Dial  
backward.  
3
4
Select the desired currency exchange rate.  
Press the Jog Dial.  
47 GB  
       
Currency Converter Settings  
Games  
} ‡ Extras } Games  
1
Press the Jog Dial backward when the  
calculator screen is displayed.  
Select Games from the Extras menu (or press  
the Jog Dial backward from standby mode to  
access the Applications Menu). Press  
2
Select Settings and press the Jog Dial.  
Select from the following:  
(or  
press the Jog Dial forward) to end the game.  
Home Currency to set the home  
currency.  
Black Jack  
The aim of this game is to  
score as close to 21 as  
possible. The values of the  
cards are:  
Foreign Currency to set the foreign  
currency. After setting the foreign  
currency, press the Jog Dial to set the  
Exchange Rate.  
10, J, Q & K = 10 points  
Ace = 1 or 11  
all others = face value.  
Currency List to edit the currency  
name.  
Place your bet by rotating the Jog Dial or  
simply enter the sum manually using the  
keypad. Once you have confirmed your bet by  
pressing the Jog Dial, two cards (one at a  
time) are dealt.  
Press the Jog Dial to confirm the currency and the  
display will automatically show the next setting.  
By rotating and pressing the Jog Dial choose  
HIT to receive more cards and STAY to stop  
dealing. When your combined total reaches  
10 or 11, you have the possibility to double  
your bet (DOUBLE) and receive one more  
48 GB  
   
card. Should you receive a pair, you can split  
these cards and play 2 games at the same time  
(SPLIT) but you must bet the same amount on  
both games.  
The player who reaches the highest amount  
wins the game. Press the Jog Dial to start a  
new game. When you have used all of your  
money the game is over. However, once your  
funds drop to 500, you will receive 50 units  
every day.  
E-mail  
} ‡ Extras } E-mail  
You can send and read E-mail by accessing to  
your office E-mail server or your Internet  
service provider on the Internet (POP3 and  
SMTP are supported). You will need the  
specific parameters from your internet service  
provider in order to complete the setup.  
Contact your service provider or operator  
directly for complete details for setting  
information, as some service provider or  
operators do not provide this service. Be sure  
to make your settings before you start using  
E-mail.  
You must place a bet every time you start a new  
game.  
Table Soccer  
The aim of this game is to  
see how many goals you  
can score within a time  
limit. Your team players  
are wearing white. Rotate  
the Jog Dial to move your  
A Security Code may be necessary when using  
your browser or sending E-mail. Use the code  
that is set as your  
. For details see  
Security Code  
, page 39.  
Security Code  
The maximum size of E-mail that can be sent or  
received is 2 Kbytes, including the header.  
player up and down the  
field and press the Jog Dial to kick the ball.  
You can turn your player around by pressing  
the Jog Dial twice. The player to be played is  
indicated by an arrow on the display.  
49 GB  
   
Reading E-mail  
Sending E-mail  
After selecting E-mail from the Extras menu,  
select Send and you can compose an E-mail.  
After selecting E-mail from the Extras menu  
select Read to connect to your server and  
display a list of incoming mail. Rotate the Jog  
Dial to highlight the E-mail that you want to  
read, select it with the Jog Dial to read it.  
Also, when you press the Jog Dial you can:  
To:  
Enter the address of the person you  
want to send the E-mail.  
Subject: Enter the subject of your E-mail.  
Body: Compose the text of your E-mail.  
Press the Jog Dial and select Send to  
send the E-mail after entering the  
text.  
Next:  
Prev:  
Read the next E-mail.  
Read the previous E-mail.  
Reply: Reply the E-mail by pressing the Jog  
Dial after selecting the sender.  
If you would like to access E-mail sent from your  
phone at a later date, copy your own E-mail  
account when writing an E-mail.  
Press the Jog Dial backward when writing an  
E-mail for additional menu options.  
You must be logged off of your E-mail account  
on your PC in order to access your E-mail using  
the phone.  
For optimum E-mail management, the phone will  
only display E-mail which is unread and not  
already downloaded by your PC. However, you  
are still able to use your PC to access mail read  
using your phone. You can only delete mail using  
your PC.  
50 GB  
E-mail  
Settings  
To send and receive E-mail you need to set  
the following.  
Enter your E-mail address correctly as  
indicated by your mail-server manager or  
your provider.  
User Name: The user name to access your  
mail server.  
Password: The password to access your mail  
server.  
E-mail  
Provider  
Address:  
Your E-mail address.  
Dial-Up Number: The phone number to dial-  
up your provider.  
Details  
POP3 Port: The number of the port for the  
mail server for the POP3 port. It  
is not necessary to change from  
the regular 110.  
SMTP Port: The number of the port for the  
mail server for the SMTP port. It  
is not necessary to change from  
the regular 25.  
User Name:  
The user name to access  
your provider.  
Password:  
The password to access  
your provider.  
POP3 Server:  
SMTP Server:  
The address of the mail  
server for receiving E-mail.  
The address of the mail  
server for sending E-mail.  
Timeout: Set the amount of time allowed to  
connect to your mail server.  
Data Call Type: You can select the relay,  
when you connect to your  
provider. Analogue is  
DNS Server:The settings for DNS (Domain  
Name Server) server.  
already set.  
51 GB  
Edit Icon  
Scheduler  
} ™ Scheduler  
Select from a range of icons to be added to the  
event entry.  
Display the calendar, save  
your daily schedule and  
set alarms for important  
tasks. The monthly  
calendar appears as  
follows:  
Edit Time  
Edit the Time of the event.  
Alarm  
Select from the following options: switch the  
Alarm On/Off, or set it 5 min./1 day before the  
event time. If the phone is switched off, you  
will not hear the alarm.  
: An event is scheduled for that day.  
Enter a new event or a new to  
do item  
Edit Text  
Use the Jog Dial and the keypad to edit the  
event text.  
1
Select Scheduler from the Main Menu  
and use the Jog Dial to select a day.  
(To change the month, press the Jog Dial  
backward.)  
Delete  
Delete the event entry.  
View  
2
Use the Jog Dial to select New and then  
enter a New Event or a New To Do item.  
View details of the event.  
The following options are available if you  
select an event.  
52 GB  
     
Daily To Do List  
The following options are available if you  
select one of the To Do Items.  
When the Calendar is displayed, press the Jog Dial  
backward to display the following options:  
} Month  
To display the specified monthly calendar.  
Complete  
}
Today  
Select Complete if you have completed the  
To Do item. The To Do entry is ticked. It is  
still possible to View, undo complete  
(= Incomplete) and to edit this entry.  
To return the cursor to the Today window.  
}
Go To ...  
To go to the desired date.  
Edit Text  
Edit the To Do entry.  
} List All  
To list all your entries.  
Delete  
Delete the To Do entry.  
} Delete  
You have the choice of the following options:  
Past will permanently delete all past To Do  
entries (but keep the current entry/entries).  
All will permanently delete all ToDo entries from  
the past and of today.  
View  
View details of the To Do entry. Select OK if  
the entry is correct.  
53 GB  
 
WAP Browser  
As a safety measure, a Security Code may be  
necessary to use your browser. Use the code that  
With WAP (Wireless Application Protocol) it  
is possible to access a variety of information  
such as news or weather reports from around  
the world including mobile internet sites.  
With this phone you can access various  
HTML or WML internet sites.  
is set as your  
(see page 39).  
Security Code  
Internet access is limited to the sites providing  
HTML or WML content. WAP (the Wireless  
Application Protocol created for Internet service  
via mobile phone) is used to access a WML site.  
You cannot make phone calls while accessing the  
mobile Internet.  
Choose WAP from the Main Menu using the  
Jog Dial or simply press the Jog Dial  
backward from standby mode to access the  
Applications Menu.  
Getting Started  
In order to use WAP, you will need to make  
some settings using parameters specified by  
your Network Operator/Service Provider. For  
your reference, sample parameters are  
provided and underlined however you will  
need the specific parameters from your  
Network Operator/Service Provider in  
order to complete the setup. You may be  
able to obtain the parameters from the web  
page of your Network Operator/Service  
Provider.  
It is necessary to register with a Network  
Operator/Service Provider to use this  
telephone as a browser. In some cases  
registration has already been completed.  
Check with your Network Operator/Service  
Provider in advance to confirm whether your  
subscription allows access to WAP services  
and whether it is possible to access WAP  
when roaming.  
54 GB  
     
The browser can be configured to access  
WAP or HTML sites. The procedure to set up  
the configuration depends on the server type.  
See an example for WAP below.  
7
8
Select Bearer Service to specify the  
bearer type (Data or SMS) your Network  
Operator/Service Provider requires.  
Bearer Service: Data  
1
Select WAP from the Main Menu (or  
press the Jog Dial backward from standby  
mode to access the Applications Menu).  
Then select Settings.  
Select Provider to set the following  
parameters specified by your Network  
Operator/Service Provider:  
Dial Up Number: +12 345 67 890  
(number to access the gateway)  
ISP User Name: abc  
2
3
4
Select the first field labeled Empty and  
then select Edit.  
ISP Password: sony  
Data Call Type: Automatic  
Enter the Security Code (default 0000) at  
the prompt (see also page 39).  
9
Select the arrow to return to the Edit  
menu.  
Select Name to enter a name that will be  
displayed for your site.  
10 Select GW Server to enter the address of  
the gateway server of your Network  
Operator/Service Provider.  
Name: My Provider  
5
6
Select Home Page to enter the URL of the  
home page specified by your Network  
Operator/Service Provider.  
GW Server: 10.255.255.255  
11 Select Security to choose On for a secure  
connection to your gateway (GW port  
9203) or Off for a non-secure connection  
(GW port 9201) depending on your  
Home Page: wap.myprovider.com  
Select Server Type to select WAP or  
HTML depending on which type of server  
your provider has.  
Network Operator/Service Provider.  
Server Type: WAP  
55 GB  
12 Select Details and then Timeout to enter  
the default timeout value in seconds  
specified by your Network Operator/  
Service Provider (if your Network  
Operator/Service Provider does not  
specify a value, 120 seconds should be  
sufficient for most Network Operators/  
Service Providers).  
The Browser Menu  
Choose WAP from the Main Menu using the  
Jog Dial or simply press the Jog Dial  
backward from standby mode to access the  
Applications Menu. From the WAP menu,  
rotate the Jog Dial and then press to select an  
item from the menu.  
Home  
} ® WAP } ¥ Home  
Timeout: 120  
13 Select the arrow to return to the previous  
menu. Select Set Home to set this entry as  
your home or default address. You are  
now ready to begin using WAP! Simply  
select Home from the WAP menu to  
access your home site.  
Select Home to access the homepage you  
have entered in Settings.  
Favourites  
} ® WAP } © Favourites  
Select Favourites to access, edit or delete a  
URL from your Favourites list. Rotate the Jog  
Dial to select a URL, then press the Jog Dial  
to display the following options:  
To set up HTML, you will need to set the  
Server  
and  
Details  
to  
Type HTML  
as well as the  
Proxy  
settings. However, with HTML the  
and  
GW Server  
settings are not necessary. Contact your  
Security  
Network Operator/Service Provider for details.  
Go:  
Connect to the selected URL.  
Move: Change the order of your Favourites.  
Edit: Edit the name and URL of Favourites.  
Delete: Delete a URL from your Favourites.  
56 GB  
You can also access your Favourites while browsing  
(see also While Browsing). However, you will  
need to enter wsp://and then the URL to any WAP  
sites you would like to access during a WAP session.  
Similarly you will need to enter http://and then  
the URL to any HTML sites you would like to  
access while browsing.  
Home:  
Refresh:  
Add to  
Access your home site.  
Refresh the displayed page.  
Favourites: Save the current URL.  
Favourites: Access a URL from Favourites.  
Manual URL:Access a URL by entering it  
manually.  
Settings  
} ® WAP } † Settings  
Quit:  
Close your browser and return  
to standby mode.  
Configure the settings to access WAP  
services. Be sure to make these settings  
before using WAP.  
Navigation  
The  
icon indicates the site that you have  
When browsing a WAP site, press the Jog  
Dial backward to scroll through the option of  
a selection field (form field). Press the Jog  
Dial to select one or more items. Press  
(or press the Jog Dial forward) to exit back to  
the previous page when browsing.  
set as your home site. To change your home  
site, select Set Home from the menu after you  
choose a site with the Jog Dial. See also  
Getting Started(see page 54) for details  
about the required Settings. Choose Delete to  
delete a site profile.  
Closing the Browser  
While Browsing  
Press  
to disconnect (only when the bearer  
Press  
(or press the Jog Dial backward)  
service is set to Data) and close the browser.  
while browsing, for the following options:  
57 GB  
Selecting a menu item in  
Applications menu  
Applications Menu  
Operations  
1
Press the Jog Dial  
backward in standby  
mode.  
Your phone has the Applications menu  
consisting of WAP, E-Mail and Games.  
It is necessary to register with a Network  
Operator/Service Provider to use this  
telephone as a browser or for E-mail. In some  
cases registration has already been completed.  
Check with your Service Provider in advance  
to confirm whether or not this phone has  
access to these services.  
The Applications  
menu appears.  
2
3
Rotate the Jog Dial to  
select the desired  
menu.  
Press the Jog Dial to enter the menu  
choice.  
When access to network-specific functions  
(SIM Application Toolkit) is available, the  
menu is displayed in Applications. (This  
feature is dependent on your Network  
Operator and may not be supported by some  
networks.)  
58 GB  
     
Appendix  
Troubleshooting  
Problem  
Possible Causes  
Possible Remedies  
Unable to switch Empty battery  
Charge the battery (see page 13).  
on  
Defective battery  
Replace the battery. Note that after several  
years, gradual decline is normal.  
The  
icon  
Weak signal  
Move to an open space or nearer to a window.  
appears  
Outside GSM coverage area Check operator coverage map.  
SIM not valid Call your service provider.  
Network access not allowed Try manual network search (see page 37).  
Call not possible Dialling error  
Use full national area code. When abroad, use  
also international access code to reach home  
country.  
All calls barred  
Check settings (Password is needed to clear).  
Check for new restrictions.  
Another SIM inserted  
Call barring set  
Check outgoing call barring settings (see page  
39).  
59 GB  
   
Problem  
Possible Causes  
Possible Remedies  
Difficult to hear –––  
the other party  
Adjust earpiece volume, and reduce noise  
around you (see page 20).  
Phones loses  
network  
Weak signal  
Reconnection, or connection to another  
operator is automatic. Switching phone off and  
on may accelerate this.  
SIM error  
Damaged SIM card  
Please contact your service provider.  
SIM card not  
registered  
Network does not recognize Please contact your service provider.  
the SIM card  
Not able to  
receive calls  
Call barring set  
Check incoming call barring settings (see page  
39).  
Divert set  
Check call divert settings (see page 43).  
Battery Charging Battery overdischarged  
indicator does not  
appear  
Charge the battery a full charging cycle (up to  
approx. 3 hours) for the indicator to appear.  
60 GB  
Unblocking the SIM Card  
Technical Specifications  
If you enter the PIN code incorrectly 3 times,  
the SIM card is blocked.  
E-GSM 900 Mobile  
Telephone  
Class 4 (2 Watts)  
1
2
3
Enter the PUK and press the Jog Dial (or  
press ).  
GSM 1800 Mobile  
Telephone  
Class 1 (1 Watt)  
Enter the new PIN (4-8 digits) and press  
the Jog Dial (or press ).  
Frequency Range  
(Transmission)  
880-915 MHz and  
1710-1785 MHz  
Enter the new Pin code again and press  
Frequency Range  
(Reception)  
925-960 MHz and  
1805-1880 MHz  
the Jog Dial (or press  
).  
The SIM is unblocked.  
Handset Operating  
Temperature  
-10 °C +55 °C  
If you enter the wrong unblock code (PUK) 10  
times, your SIM is blocked completely. In this  
case contact your Network Operator/Service  
Provider.  
In order to receive more information (SIM and  
PUK), please contact your Network Operator/  
Service Provider.  
Accessories Operating 0 °C +45 °C  
Temperature  
61 GB  
   
Sony Ericsson Mobile Communications AB  
reserves the right to make changes or  
improvements to any of the products  
Licensing  
Your CMD-Z7 is authorized for use in GSM  
900 / 1800 networks and complies with EU  
standards.  
described in this guide without prior notice.  
This equipment complies with  
the essential requirements of  
the Directive 1999/5/EC  
Radio and  
T9text input is a registered trademark of  
Tegic Communications Inc. and the T9text  
input software is provided under license of  
Tegic Communications Inc.  
Telecommunications Terminal  
0168  
Equipment Directive.  
95/54/EC Car Automotive  
Directive”  
Applies to accessories used in  
vehicles confirmed by the  
e-mark.  
Part of the software included in this product is  
© Copyright STNC Ltd. 1994 - 1999 All  
rights reserved.  
Part of the software included in this product is  
© Copyright Microsoft Corporation 2000 -  
2001 All rights reserved.  
Declaration of Conformity  
See page 63 Declaration of Conformity Z7.  
62 GB  
 
63 GB  
Important Notice  
st  
Effective 1 October 2001, Sony Ericsson  
Mobile Communications AB was established.  
This product is manufactured for, by, or under  
license from, Sony Corporation and/or Sony  
Ericsson Mobile Communications AB.  
Sony Ericsson Mobile Communications AB  
agrees that it shall honor the consumer  
guarantee applicable for this product to the  
same extent, and in the same manner as, Sony  
Corporation.  
All Sony trademarks and copyright remain the  
property of Sony Corporation and are used  
with permission by Sony Ericsson Mobile  
Communications AB.  
Should you have any questions regarding the  
product, the guarantee, or Sony Ericsson  
Mobile Communications AB, please contact  
our Helpline Services indicated on the  
guarantee card.  
64 GB  
Index  
Clock  
Alarm  
Set  
Timer  
World Clock  
A
G
Any Key Answer  
Auto Answer  
Auto Redial  
41  
42  
42  
46  
47  
46  
46  
15  
Games  
11, 48  
37  
Greeting Message  
H
Headset  
Connection  
19, 21  
8
B
Backlight  
Battery Pack  
Charging  
Inserting  
37  
D
J
13  
12  
Data Services  
Divert  
42  
43  
21  
Jog Dial  
DTMF  
K
Key Click  
35  
C
Calculator  
Currency Converter  
Call Cost  
47  
47  
40  
45  
20  
E
E-mail  
Emergency Calls  
Error Tone  
Event Sounds  
49  
38, 39  
35  
L
Language  
37  
37  
33  
21  
Call History  
Call Hold  
Call Time  
Call Waiting  
Caller ID  
LCD Contrast  
Local Area Info  
Loudspeaker  
34  
40  
21, 41  
F
41  
19  
Factory Reset  
Flip Call  
38  
19  
M
Ciphering  
Memory Info  
Microphone On/Off  
37  
21  
65 GB  
 
Ringer Volume  
Adjusting  
Roaming  
34  
20  
15  
Read  
Reply  
30  
31  
32  
33  
33  
32  
N
Network  
15  
58  
Network Specific Service  
Reply Cost  
Result Report  
Service Centre  
Validity period  
Speaker Volume  
Adjusting  
O
S
One Minute Beep  
42  
Scheduler  
52  
52  
53  
39  
41  
37  
15  
15  
9
Event  
To Do  
20  
18  
P
Phonebook  
Creating Entries  
FDN Phonebook  
Grouping  
Security Code  
Select Line  
Select Network  
Selection  
Signal Strength  
Silent Mode  
SIM Application Toolkit  
SIM Card  
Speed Dialing  
25  
26  
25  
24  
28  
25  
24  
27  
T
T9 Text Entry  
23  
Making Calls  
Note  
Own Number  
Saving Entries  
Search  
Service Dialling  
Numbers  
V
58  
Vibra Alert  
Voice Dialing  
Voice Memo  
Voicemail  
9
17  
35  
Inserting  
12  
13  
9
Removing  
Single Beep  
SMS (Messaging)  
Create  
Delete  
Edit  
Forward  
Memory class  
Message Format  
8, 27  
26  
14, 38  
38  
PIN  
PIN2  
Preferences  
Preferred List  
W
31  
30  
31  
31  
32  
33  
Wallpaper  
WAP Browser  
37  
54  
36  
37  
R
Ringer Type  
34  
66 GB  
Made from chlorine-free, recycled paper  
Sony Ericsson Mobile Communications AB  

Transcend Information MMCmicro User Manual
Sony Clock Radio ICF C717PJ User Manual
Sears 247799891 User Manual
Seagate ST650211CF User Manual
Seagate MOMENTUS ST9120821SB User Manual
Samsung SGH Z170 User Manual
Samsung SE S084B User Manual
Samsung Cell Phone GT N7100 User Manual
Nokia IPSO 40 User Manual
Nokia 6230i User Manual