Sony CMD Z5 User Manual
3-222-028-11 (1)  
Mobile Telephone  
User Guide  
GB  
CMD-Z5  
2000 by Sony Corporation  
Sa fe t y Pre ca u t io n s  
• Turn off your mobile phone in places where mobile phones are  
prohibited including aircraft and hospitals.  
• Turn off your mobile phone in places where there is a possibility of fires  
or explosions due to electrical discharge.  
• Turn off your mobile phone in the presence of fuels, caustic/ harsh  
chemicals or dust and in such locations as petrol stations.  
• Do not expose your mobile phone to excessive humidity and extreme  
temperatures, dusty places, rain or wet places and direct sunlight.  
• Note that in some countries using a cellular phone without a hands-free  
kit while driving is not allowed.  
• Do not allow children to play with your phone.  
• Take special care in the disposal of your battery, using a special facility  
where available. Do not puncture, burn, or short circuit your battery.  
• Limit the distance between the mains socket and the phone when  
charging for easy accessibility.  
• Consult your physician or the manufacturer of personal medical devices  
(pacemakers, hearing aids. etc.) regarding any restrictions on the use of  
a mobile telephone.  
• Use only Sony-approved CMD-Z5 batteries and accessories with your  
phone.  
• Do not take apart or modify your phone. For repairs or inspections of  
your phone, please see your Sony dealer or the store where you bought  
the phone.  
Wa rn in g  
• Unauthorised batteries, chargers, and accessories will invalidate any  
approvals and warranty given for your phone and may be dangerous.  
• For use in the car, please connect your GSM mobile phone to an external  
antenna. The external antenna can be connected to your mobile phone  
with the appropriate accessory, e.g. Hands-free Kit. Please contact your  
car manufacturer concerning the appropriate position of the external  
antenna on your car.  
Sony is neither liable nor responsible for any misuse of recorded communications.  
You should only record conversations with the prior consent of the people involved.  
You are solely responsible to any individuals and/ or governing authorities for  
communications recorded without the prior consent of the parties involved. Also, it is  
your responsibility to obey and abide by all obligations, rules and laws, particularly those  
regarding confidentiality.  
3GB  
Ta b le o f Co n t e n t s  
What's Included in Your Kit ................................... 6  
Welcome to Sony  
CMD-Z5  
Parts and Controls ................................................... 6  
Attaching the Hand Strap ...................................... 7  
The Basic Features of Your Phone ......................... 7  
Icon Glossary .......................................................... 10  
Menu Overview ......................................................11  
Inserting the SIM Card ......................................... 12  
Inserting the Battery Pack .................................... 13  
Charging the Battery Pack .................................... 13  
Switching on Your Phone ..................................... 15  
Connecting to the Network .................................. 16  
Getting Started  
Making Calls .......................................................... 17  
Answering/ Ending Calls ..................................... 18  
During a Call (Adjusting the ringer/ speaker  
Basic Operation  
volume, Call hold) ................................................. 19  
Standard Text Input ............................................... 23  
T9 Text Input .......................................................... 25  
Text Edit .................................................................. 27  
About the Phonebook ........................................... 28  
Creating Entries in the Phonebook ..................... 29  
Saving Phonebook Entries from  
Using the  
Phonebook  
Standby Mode ........................................................ 30  
Making Calls from the Phonebook ..................... 31  
Grouping ................................................................. 32  
Editing the Phonebook ......................................... 33  
Custom .................................................................... 34  
Voice Mail ............................................................... 35  
Phonebook Menu ................................................... 36  
4GB  
Messages ................................................................. 40  
Ringer ...................................................................... 45  
Schedule .................................................................. 50  
Clock ........................................................................ 52  
Divert ....................................................................... 55  
Calculator ................................................................ 57  
Call History ............................................................ 58  
Settings .................................................................... 60  
Memo ....................................................................... 72  
Menu Operations  
Troubleshooting ..................................................... 75  
Unblocking the SIM Card ..................................... 76  
Technical Specifications ........................................ 77  
Index ........................................................................ 78  
Appendix  
5GB  
We lco m e t o So n y CMD-Z5  
WelcometotheSony CMD-Z5designed for usein theworldwidenetwork  
ofGSM (GlobalSystem for MobileCommunications).Your phoneisfully  
equipped with theAdvanced Jog Dialand a visualmenu for easy access  
and navigation -with onlyonehand!  
Wh a t ' s In clu d e d in Yo u r Kit  
Thekitshould includethefollowing:  
• Onemobilephone  
• Onelithium ion standard battery  
• One AC adaptor  
• One AC cable  
• Onedesktop holder  
• One hand strap  
• This manual  
Ifoneofthesepartsismissing,pleasecontactyour retaildealer  
immediately.  
Pa rt s a n d Co n t ro ls  
7
qf  
1
2
3
8
9
0
qa  
qs  
qd  
qg  
qh  
4
5
6
1
2
3
4
5
6
7
8
Ear piece  
9
0
Memo key  
Clear key  
Advanced Jog Dial  
Display  
qa On/ Off key  
Keys (alphanumeric keys)  
Microphone  
Flip  
qs Battery pack  
qd External connector  
(Charging and Accessories)  
qf Ringer  
Antenna  
qg Battery release hook  
Send key  
6GB  
qh Charging indicator  
At t a ch in g t h e Ha n d St ra p  
Attach the supplied hand strap to the phone as illustrated below.  
1
2
Th e Ba sic Fe a t u re s o f Yo u r Ph o n e  
• Flip call  
You can easily open the flip cover with one hand.  
Even if the flip cover is closed and you receive a call,  
you can still take the call by opening the flip cover.  
This feature can be set up by the menu operation.  
Im p o rt a n t  
Opening and closing the flip cover may cause the screen to flicker, however this is  
not a defect.  
• Tag window  
You can still see tags on the screen even with the flip cover closed.  
Information corresponding to each tag can be displayed. To clear the tag,  
use  
, Jog Dial, or  
.
Received SMS To review the details of the received SMS, open the  
flip cover. Pressing the Jog Dial allows you to see  
the message. You can then keep  
the person who sent the SMS.  
to call back  
Missed call  
To see the caller's number, open the flip cover.  
Press the to call the number.  
7GB  
Schedule  
Thesecond and followingeventsaredisplayed  
attheirscheduled times.  
Thefirst event for theday isdisplayed from the  
startofthatday.  
Toreview thecontentsoftheevent,open the  
flip cover.  
• Advanced Jog Dial  
The Jog Dial provides one-handed operation navigation.  
“Jog Dial” in this manual is the “Advanced Jog Dial”.  
Display Icon  
Operation  
Function  
Rotate the Jog Dial clockwise  
or counter-clockwise  
Scrolls through menu  
options.  
Press the Jog Dial straight  
into the phone  
Confirms the selected  
option (highlighted) in the  
display. Accepts an entry  
made with keys. Takes  
incoming calls when the  
flip cover is closed.  
Keep the Jog Dial pressed  
Press the Jog Dial forward  
Dials the phone number  
selected.  
Exits from one menu to the  
previous screen. Also ends  
a call.  
Press the Jog Dial backward  
Opens the “pop up menu”.  
Also opens help.  
8GB  
• Phonebook  
You can open the Phonebook from the standby mode by rotating the Jog  
Dial.  
You can easily make a call from the Phonebook or a variety of other  
operations including searching by Group and saving such information as  
e-mail addresses. (see “Phonebook” page 28).  
• Memo/Answering machine  
In standby mode  
• To listen to the Voice memo — press  
• To record your voice — keep  
pressed  
• To open the Answering machine menu — keep  
pressed  
• To turn on your Answering machine to accept all calls when the flip  
cover is closed — keep the Jog Dial pressed  
When receiving a call  
• To turn on your Answering machine — press  
During a call  
• To record the conversation — press  
• Manner mode  
You can set the Manner mode by pressing the Jog Dial backward while in  
the standby mode when the flip cover is closed. Select the following icon  
and press the Jog Dial:  
•
— Silent  
•
— Vibra alert only  
•
— Single beep  
•
— Manner off  
• Voice mail  
To speed dial your Voice mail, keep  
pressed to automatically dial  
your “Personal answering service” to listen to messages, etc. (see “Using  
the Phonebook-Voice mail” page 35).  
9GB  
Ico n Glo ssa ry  
Your phoneletsyou seeat a glanceifyou havemissed calls,have  
messageswaitingand thestatusofoptionsyou haveselected (forexample  
ifyou havediverted your phoneor turned theringer off).Sony has  
developed thefollowing iconstoprovideyou with a quick overview of  
your mobileactivity:  
Status  
Icon  
Explanation  
Icon  
Explanation  
Network signal strength  
Network not available  
(no calls possible)  
Battery strength  
(flashing=battery level low)  
Divert option activated  
Missed call  
SMS message waiting  
(flashing=message storage full)  
Alarm  
Answering machine  
notification  
Ringer b Vibra alert  
Vibra alert b Ringer  
Vibra alert on  
Answering machine on  
Network voice mail  
Active call  
Manner  
Icon  
Explanation  
Silent  
Icon  
Icon  
Explanation  
Vibra alert only  
Ringer off  
Single beep  
Function  
Icon  
Explanation  
Go to  
Explanation  
View  
Search  
Paste  
Help notification  
T9 (Text editing system)  
10GB  
Me n u Ove rvie w  
PresstheJog Dialfrom standby modetoaccesstheMain menu:  
Messages  
Memo  
p40  
p72  
Read  
Create  
Settings  
Local area info  
p40  
p42  
p42  
p44  
Voice memo box  
Record voice  
Answering machine  
p72  
p73  
p73  
Settings  
p60  
Ringer  
p45  
Preferences  
Security  
Call time, cost  
Call settings  
p60  
p62  
p66  
p68  
Ringer  
Vibra alert  
Manner mode  
p45  
p49  
p49  
Call history  
Schedule  
Phonebook  
Clock  
p50  
p28  
p52  
p58  
Calculator  
p57  
Rate conversion  
p57  
Divert  
p55  
Alarm  
Timer  
World clock  
Time signal  
Clock format  
Analogue  
Auto power off  
Set the day/time  
p52  
p52  
p53  
p53  
p54  
p54  
p54  
p54  
All calls  
p55  
p55  
p55  
p55  
p55  
p55  
p55  
If not reachable  
If no reply  
If busy  
All fax  
All data  
Cancel all  
Tip  
• When you press the Jog Dial backward at the Main menu, the last 5  
items which are displayed on the Main menu are shown.  
11GB  
Ge t t in g St a rt e d  
In se rt in g t h e SIM Ca rd  
Your SIM card containsa computer chip with your servicedetailsand  
phonenumber.TheSIM card should bekept securein thesameway asa  
creditcard.Also,donotbend,scratch or exposeittomoisture,and protect  
itfrom contactwith staticelectricity.  
Im p o rt a n t  
To avoid corrupting the memory of the SIM card, always switch off your phone  
before removing or inserting your SIM card.  
1
2
Removethebatterypack.  
SlidetheSIM card holder totheleft to  
unlock and lift up the tray.Slide the SIM  
card intothetray.  
(You can alsofind a briefexplanation on  
theSIM card holder.)  
3
4
Closethetray with theSIM card inserted  
untilit is locked.  
Replacethebatterypack.  
No t e  
Position the SIM card with the gold contacts facing up and the angled corner to the  
upper left as you insert it into the SIM card holder.  
To remove the SIM card  
Follow steps1to 4above,removing theSIM card from thetray in step 3.  
12GB  
In se rt in g t h e Ba t t e ry Pa ck  
1
Unwrap thebatterypack.  
2
Pressthebattery pack firmly intoplace  
and check thatitsnapsclosed.  
To remove the battery pack  
Firstturn thepower offand waituntilthedisplay goesblank.Pressthe  
batteryreleasehookdown and removethebattery.  
Wa rn in g  
•
•
If the battery is removed from the phone at constant temperature for approx. 3  
days, the clock will be reset.  
Do not remove the battery pack from the phone when the power is on. Doing so  
may cause settings or data to be deleted or changed.  
Ch a rg in g t h e Ba t t e ry Pa ck  
Assupplied,your battery pack willnot befully charged.  
You can selectoneofthefollowingthreewaystochargethebatterypack:  
1 Directly connectthephonetotheAC  
adaptor.  
To mains  
2 Usethedesktop holdertochargethe  
batterypack:  
To mains  
13GB  
3 Chargethebatteryindependently.  
Makesurethatthebackofthebattery(thesidewith thelabel)is  
facingtowardsyou.Align thebatterywith thedesktop holder  
and insert thebattery pack alltheway to theend untilit is  
locked.  
To mains  
Charging indicator on the battery pack  
A red light comeson when charging starts. Thelight turnsgreen,  
after about 3hours,when charging iscomplete. But,it may vary  
depending on certain conditionse.g. Ifyour phoneisswitched on or  
temperatureisbeyond operationalrange. Asan energysaving  
measure,disconnecttheACadaptor from themainssocketand from  
thephoneaftercharging.  
Thebattery icon on thedisplay indicatescharging status.When the  
batteryisalmostcompletelycharged,thebatteryicon showsallbars.  
However,thisdisplay showsa minimalcriterion only,check theindicator  
on thebatterypack(refertotheabove)toconfirm whetherornotthe  
battery pack isfully charged.  
Im p o rt a n t  
•
•
If the red light on the battery pack blinks, reconnect the AC adaptor and reinsert  
the phone (or the battery pack). If you repeat this process several times and the  
indicator continues blinking, the battery pack might be defective. Stop charging  
the battery pack immediately and replace it.  
Use only the Sony-specified CMD-Z5 battery pack and charger. Your battery is  
equipped with short circuit protection. If you short your battery accidentally,  
charge the battery immediately to unlock the short circuit protection.  
Usage time  
When your battery pack isnearly discharged thebattery icon on the  
display blinksand thephonebeepstoinform you thatonly a short  
amountofcallingtimeremains.  
14GB  
Sw it ch in g o n Yo u r Ph o n e  
To switch your phone on/ off, keep  
pressed.  
Entering PIN  
For security reasons, your SIM card may be  
protected with a Personal Identification Number  
(PIN), which is supplied with your SIM card. Enter  
your PIN with the keys (the PIN appears in code as  
) and press the Jog Dial (or  
your entry.  
) to confirm  
If you do not enter a PIN code, your phone will automatically switch off  
after approximately 2 minutes. It is possible to disable the PIN code  
prompt (see “Menu Operations-Settings-Security” page 62).  
No t e  
If the Personal lock has been set, there are some cases that you need to additionally  
input the security code.  
Wa rn in g  
You only have 3 attempts to enter the correct PIN. After the third attempt, your SIM  
is blocked and you must enter your PUK code (Personal Unblocking Key). (see also  
“Troubleshooting” page 75).  
If necessary, you can obtain your PUK code from your Network Operator/ Service  
Provider.  
Emergency calls  
Emergency calls (112, 999, etc.) are possible when you have network  
coverage and a valid registered SIM inserted in the phone (even if the keys  
are locked). The support of this feature depends on the Network Operator.  
15GB  
Co n n e ct in g t o t h e Ne t w o rk  
After successfully entering your PIN code,your phonesearchesfor an  
availableGSMnetwork.Thenetworksearch isautomatic,butmaytakea  
few seconds(seealso“Menu Operations-Settings-Preferences”page60).  
You areready tomakeand receivecallswhen the  
NetworkOperator'snameappearson thedisplay.  
Thefollowingindicatesthestrength ofthereceived networksignal.Ifthe  
signalisvery weak,thereisa risk oflosing service.  
Strong signal Weak signal  
No service  
If you cannot obtain service  
Onereason forfailuretoobtain networkserviceisthatthereception  
strength maybetooweak.Trymovingtoahigher elevation,toawindow  
oropen space.Makesurethatthereisnothingobstructingtheantenna.  
Roaming  
Ifyou areout ofrangeofyour “Home” Network Operator,especially  
when you areabroad,anotherNetworkOperatormaybeselected  
automatically,subjecttosignalstrength and roamingagreementsbetween  
Network Operators.Contactyour Network Operator/ ServiceProvider for  
details.  
16GB  
Ba sic Op e ra t io n  
Ma kin g Ca lls  
The operator’s name must appear on the display and the flip must be  
opened in order to make a call (except emergency calls).  
1
2
3
Dial the complete number of the party you want to call  
(including the area code even when dialling locally).  
Press  
to correct any errors. Keep  
pressed to clear the  
) to call the number  
entire number.  
Keep the Jog Dial pressed (or press  
displayed.  
or  
Press the Jog Dial to save the number to  
the Phonebook.  
Tip  
• If the Auto redial option is on (see page 69) and  
the number you have called is engaged, your  
phone automatically displays the Auto redial  
option to call the number repeatedly at  
progressive intervals until the call is connected.  
However, if there is an incoming call, the Auto  
redial option will be cancelled.  
International calls  
Each country has an individual international access code for dialling  
abroad.  
1
Keep  
pressed until “+ ” appears.  
2
Enter the country code, followed by the area code and the  
number.  
17GB  
An sw e rin g /En d in g Ca lls  
When the flip is open, incoming calls are indicated by a ringing tone as  
well as the incoming call indicator icon on the display. Press the Jog Dial  
(or  
) to accept the call.  
If the caller is using the Caller ID feature, the caller’s name appears on the  
display if the number is saved in the called person’s Phonebook. Only the  
number appears on the display if the number is not saved in the  
Phonebook.  
If you do not wish to answer the call, press  
while the phone is  
ringing. The call is rejected (the caller hears a busy tone or is diverted if a  
divert has been set). If you do not answer the call, the missed call icon  
appears on the display in standby mode. Press  
in standby mode or  
select the Call history from the Main menu for information about the  
missed call.  
When the flip cover is closed, press the Jog Dial to start a call. If you do  
not wish to answer, press the Jog Dial forward while the phone is ringing  
to reject the call.  
The operation is the same when the flip cover is opened, but the missed  
call icon appears in the Tag window if you do not answer. (For details see  
“Tag Window” page 7)  
Ending calls  
Press  
or press the Jog Dial forward to end a call.  
Flip call  
When Flip call is set (see page 69) and you receive a call, you can accept it  
by opening the flip cover.  
Close the flip cover to end the call.  
Memo  
When you receive a call with the flip cover opened, you can press  
start your announcement and to turn on the Answering machine.  
to  
No t e  
If you have a call waiting, press  
to end the current call and accept the call  
waiting by pressing (see also “Call settings-Call waiting” page 68).  
18GB  
Du rin g a Ca ll  
Adjusting the ringer/speaker volume  
When your phone is ringing, you can adjust the  
ringer volume by rotating the Jog Dial.  
During a call, you can adjust the speaker volume by  
rotating the Jog Dial. Rotate up to increase the  
volume and down to decrease the volume.  
Tips  
• During a call, use your phone as a notepad to enter a phone number. If  
you make a second call simultaneously, the active call is put on hold  
(see also “Call hold”). Even when the call is ended, the number you  
entered reappears on the display.  
• Press the Jog Dial for the option to save the number in the Phonebook  
or simply keep the Jog Dial pressed (or press  
) to call the number.  
19GB  
Call hold  
Call hold allows you to manage 2 calls at the same time. For example, if  
you are speaking to someone on your CMD-Z5 and you want to make  
another call, you can put the current or active call on hold in order to call  
someone else. Check with your Network Operator/ Service Provider for  
details about this service.  
One active call  
1
Press the Jog Dial backward and select  
Call hold.  
2
3
Press the Jog Dial to confirm your selection.  
Press the Jog Dial again to access the Phonebook to retrieve a  
number or use the keys to enter a number.  
4
Keep the Jog Dial pressed (or press  
) to make a call.  
Tip  
• You can also put a call on hold automatically. Simply use the Notepad  
and make a second call; or just press  
.
End all calls  
Press the Jog Dial backward and select End all calls or simply press  
any time to end both the active call and the call on hold.  
at  
Send DTMF  
Press the Jog Dial backward and select this option during a call to Send  
DTMF tones (e.g. from a Phonebook entry) which are tones designed to  
respond to menu prompts e.g. in your Voice mail or other services.  
Mic off/Mic on  
Press the Jog Dial backward and select the Mic off/ Mic on option to mute  
and unmute the microphone.  
20GB  
One active call (or one call on hold) and one call w aiting  
When your phone alerts you (beep) that a call is waiting, there are several  
options available.  
1
The display automatically offers you call  
waiting options.  
2
Select Swap to put the active call on hold  
and connect the waiting call.  
or  
Press the Jog Dial backward and select  
one of the following options.  
Swap to alternate between the active call and the call on hold.  
Busy to indicate to the calling party that your line is engaged.  
Replace to end the active call and retrieve the call waiting.  
End all calls to end all established calls and accept the call  
waiting.  
Mic off/Mic on to mute/ unmute the microphone.  
No t e  
In step 1 select Busy to indicate to the calling party that your line is engaged.  
21GB  
Memo during a call  
You can record the conversation for up to 20 seconds. Also, you can play  
back the pre-recorded Voice memos, to let the caller hear them, during  
conversation.  
Pressing  
records a Voice memo. To playback a memo, open Memo  
from the Main Menu. Then open the Voice memo box and select the memo  
you want to playback for the caller.  
Im p o rt a n t  
Obtain permission from the other party beforehand if you want to record the  
conversation. Also, be aware that the recorded contents can be listened to by third  
parties if they have access to your phone.  
22GB  
St a n d a rd Te xt In p u t  
The Jog Dial provides a quick alternative to entry standard characters.  
Simply press a key once and then rotate the Jog Dial to move the cursor to  
the desired character on the preview bar. Press the Jog Dial or wait a  
moment to confirm. However, standard character entry is still possible if  
you prefer; press the corresponding key several times until the character  
appears.  
Character Table  
Key  
Low er Case Characters  
Upper Case Characters  
Numeric  
[ SPACE ]  
0
1
2
3
4
5
6
7
8
9
< SHIFT >  
< SYMBOL PAGE >  
< SHIFT >  
Tip  
• Keep  
pressed to change to T9 mode for easy text entry (see also  
“T9 Text Input” page 25).  
23GB  
Example:  
To enter “s” when creating a message.  
1
Press  
.
A character or number appears.  
2
Rotate the Jog Dial to “s”(or press  
three more times).  
3
Press the Jog Dial (or wait for a moment).  
Tips  
• Press  
to shift between:  
...... lower case letters permanently  
...... an upper case letter and then revert back to lower case  
...... upper case letters permanently  
...... numbers  
• Press  
to clear the character or number just before the cursor.  
To clear the entire text, keep  
pressed.  
24GB  
T9 Te xt In p u t  
In addition to the standard method of entering text messages in which you  
press a key a certain number of times until the desired letter appears, Sony  
has equipped your phone with an additional feature called T9 Text Input.  
T9 Text Input and the Jog Dial make writing messages quicker and easier.  
Just type a word by tapping each key once per letter. After you have  
finished typing to the end of the word, T9 Text Input gives you several  
words to select from in the preview bar based on the key combination you  
entered.  
(see page 24 on how to enter lower-case letters, upper-case letters and  
numbers).  
Making a sample entry w ith T9 Text Input  
To insert the word “Sony” when creating a message.  
1
2
Keep  
Press  
pressed to switch to T9 mode if  
to shift to  
does not appear.  
.
3
4
5
To type the word “Sony”, press each of the following keys in  
order:  
,
,
,
.
At the end of the word, check the preview bar to see possible  
combinations of the keys you typed.  
Rotate the Jog Dial to select “Sony”. If  
your desired word is first on the list, just  
press the Jog Dial to select it.  
25GB  
No t e  
If the word you intended to type does not appear in the list, keep  
pressed to  
switch to the standard text input mode (see page 23) and type the word using the  
standard text entry method. Once you have finished, keep pressed to return to  
T9 mode. This new word will automatically be added to the T9 memory so that next  
time you type the word it will appear in T9 mode. This process is applied to editing  
text as well.  
However, Bulgarian, Croatian, Czech, Greek, Hungarian, Polish, Romanian,  
Slovakian, Slovenian and Turkish are not supported.  
Adding a symbol or punctuation  
To insert a symbol when creating a message.  
1
Press  
.
2
3
Use the Jog Dial to scroll from row to row.  
Press the Jog Dial to select a row.  
4
5
Rotate the Jog Dial to scroll within the row.  
Press the Jog Dial to select a symbol.  
Tip  
• For “Smart Punctuation”, just press  
where you would add a  
fullstop, hyphen or apostrophe and T9 will automatically insert the  
most likely punctuation symbol. You just keep on typing and T9 will  
punctuate for you!  
26GB  
Te xt Ed it  
When making text entries, press the Jog Dial backward to enter text edit  
which provides the following features:  
Phonebook  
To paste saved information in the Phonebook.  
Template  
To paste a sentence that is already prepared.  
Last message  
To attach the last edited SMS.  
Event  
To paste events from the schedule.  
Phrase  
To save several commonly used phrases by pasting the saved words.  
You can also delete the saved words.  
If you would like to save a new word, select ”New word”. (You can  
save up to 10 words/ phrases each having up to 32 characters.)  
If you would like to delete a saved word, select ”Delete”.  
Top  
To return the cursor to the top of the text.  
Character, Timer  
To select the length of time for number or letters to be accepted before  
the next key can be pressed for the Standard text input mode.  
27GB  
Usin g t h e Ph o n e b o o k  
Ab o u t t h e Ph o n e b o o k  
1
2
It is very convenient to save frequently-used  
phone numbers and e-mail addresses. You can  
save up to 500 names in the Phone memory.  
The number of names that you can save to the  
Phonebook in the SIM card depends on the  
capacity and specifications of the SIM card.  
3
No t e  
•
You can make the same set up as Phone memory for names and numbers which  
are saved in SIM card, however, information other than names and numbers is  
saved in Phone memory. You can save these data in only one SIM card.  
•
•
Names stored in the Phone memory with several phone numbers are in the  
Phone memory.  
Names stored in the SIM card with several phone numbers are in the SIM card.  
The Phonebook has the following features:  
Group (above illustration 1)  
If you classify a name group by group, you can easily perform  
searches. You can save up to 10 groups with each group having its  
own name and icon.  
Name/Number (above illustration 2)  
You can save up to 3 numbers and icons for each name. An icon  
indicating where the name is saved, either to the SIM card or to the  
Phone memory is displayed to the left of the name.  
— SIM card  
— Phone memory  
Custom (above illustration 3)  
You can save up to 120 characters such as addresses, e-mail  
addresses and company names in each entry. And, one name can  
have up to 2 entries.  
Priority entry  
When you open the Phonebook, the 9 most frequently used entries  
are separately displayed from the ABC sort list. All of these 9  
entries are saved in the SIM card.  
28GB  
Im p o rt a n t  
Entries might be changed or deleted due to malfunctions, repairs or other  
circumstances.  
To limit the risk of losing data make a copy of important entries such as phone  
numbers. Also note that, we can not take responsibility for entries that are changed  
or deleted.  
Cre a t in g En t rie s in t h e Ph o n e b o o k  
1
Rotate the Jog Dial in standby mode to  
open the Phonebook.  
2
Select Phonebook menu and press the Jog Dial.  
Select New entry and press the Jog Dial.  
3
4
Select SIM card to save the entry to the SIM card memory or  
Phone memory, press the Jog Dial to confirm.  
This step is skipped if “Choice” is not selected for the “Memory  
in use” in the Phonebook menu (see page 37).  
29GB  
5
6
Enter the phone number. Press the Jog Dial to confirm.  
Rotate the Jog Dial to select the phone type icon and press the  
Jog Dial.  
7
8
Enter the name, press the Jog Dial to confirm.  
(For more details, see “Basic Operation-Standard Text Input”  
page 23 or T9 Text Input page 25).  
Press the Jog Dial and wait for a moment to return to the  
Phonebook again.  
No t e  
Phonebook memory size (number of memory spaces and maximum number of  
letters and digits) depends on your SIM card. When you save to the SIM card, the  
number of names and phone numbers depends on the SIM card.  
When you save to the Phone memory, you can save up to 500 names. You can enter  
up to 20 characters for the name and up to 40 digits for the number.  
Sa vin g Ph o n e b o o k En t rie s fro m St a n d b y Mo d e  
1
Enter the phone number.  
2
Press the Jog Dial to call or to save the  
number.  
3
4
Rotate the Jog Dial to select Save.  
Press the Jog Dial to confirm your selection.  
Finish saving the Phonebook entry by following steps 4 to 8 in the  
previous section “Creating Entries in the Phonebook.”  
30GB  
Ma kin g Ca lls fro m t h e Ph o n e b o o k  
Making calls from the ABC sort list  
You can select the name from the ABC sort list to  
make a call.  
Rotate the Jog Dial in standby mode to open the  
Phonebook, use the Jog Dial to display the ABC sort  
list. If several numbers are displayed after selecting  
the person's name, select the number to be dialed.  
No t e  
If you have saved several numbers for one name, the first number on the list is  
displayed in the pop up window.  
Tips  
• To search in the Phonebook, press a key to advance to that letter in  
the Phonebook. E.g. to advance to entries beginning with “M”, press  
.
• You can also do a name search in the Phonebook menu.(see page 37)  
Making calls from the group sort list  
In the ABC sort list, pressing the Jog Dial backward displays the Group  
sort list.  
Select the group from the Group sort list and then  
select the name to make a call.  
31GB  
Gro u p in g  
Group setting  
Create new group or change the name or icon of  
existing groups.  
Set group  
You can change the group.  
1
Select the Name/ Number of the group  
that you want to change from the ABC  
sort list or the Group sort list, then press  
the Jog Dial.  
2
3
Select the group name and press the Jog  
Dial.  
Rotate the Jog Dial to select the group  
name.  
4
Press the Jog Dial to confirm your  
selection.  
No t e  
You can change the group for entries in the SIM card. However, if you reset the set  
group in another SIM card, that group information in the previous SIM card is  
deleted.  
32GB  
Ed it in g t h e Ph o n e b o o k  
The Jog Dial and the Phonebook make it easy to keep all your contacts up  
to date and easy to access with flexibility in customizing. Following the  
steps below you can call, edit, delete or copy entries. You can edit entries  
in the Phonebook by Number, Name, Group or by Custom.  
Editing a name  
You can edit, delete and copy names.  
1
2
3
Rotate the Jog Dial in standby mode to open the Phonebook.  
Rotate the Jog Dial to select the name you want to edit.  
Press the Jog Dial.  
The saved numbers of that person are  
displayed.  
Selecting the name allows you to do the  
following.  
• Select Edit to change the name.  
• Select Delete entry to delete the selected name, its saved  
number (or numbers in case more than one number is saved  
under that name) and custom.  
• Select Copy entry to copy the selected name, its saved  
number (or numbers in case more than one number is saved  
under that name) and custom.  
4
Press the Jog Dial to confirm your selection.  
33GB  
Editing a number  
1
Follow step 1 to 2 in Editing a name.  
2
Select the number you want to edit and  
press the Jog Dial for a menu of editing  
options.  
• Select Call to call the number.  
• Select Edit to change the selected number.  
• Select Delete to erase the selected  
number from the Phonebook.  
• Select Copy to copy the entry from one memory location to  
another.  
3
Press the Jog Dial to confirm your selection.  
Cu st o m  
Custom edit  
The “Custom” is similar to a memo pad for additional information as  
e-mail or postal addresses.  
1
Follow steps 1-2 in Editing a Name.  
2
Select the Custom entry you want to edit.  
34GB  
3
4
Press the Jog Dial for a menu of editing options.  
• Select Edit to change the Custom entry.  
• Select Delete to delete the Custom entry from the Phonebook.  
• Select Copy to copy the entry from one memory location to  
another.  
Press the Jog Dial to confirm your selection.  
Vo ice Ma il  
The first entry in the Phonebook is reserved for your Voice mail number.  
Like other Phonebook entries, you can save and edit your Voice mail  
number here.  
For your convenience, there is also quick access to your Voice mail via  
- just keep  
pressed to dial your Voice mail without even opening  
the Phonebook!  
For more information, please contact your Network Operator.  
To set up your Voice mail  
1
Rotate the Jog Dial in standby mode to open the Phonebook.  
2
Rotate the Jog Dial to select Voice mail  
and press the Jog Dial.  
3
4
Enter the number at the prompt.  
Press the Jog Dial to confirm your entry.  
Tip  
• Once you set the Voice mail, you can listen to your Voice mail by  
selecting Voice mail in step 2 and pressing  
.
No t e  
If your Voice mail number has already been set up, do not edit it otherwise you  
may disrupt your service.  
35GB  
The Voice mail icon  
(or the envelope icon depending on the network)  
appears in the display to inform you when you have new voice messages  
waiting. Contact your Network Operator/ Service Provider for details. To  
listen to your messages, just keep  
pressed to call your Voice mail!  
Ph o n e b o o k Me n u  
Ow n number  
The first entry in the Phonebook menu is for you own numbers, use it for  
quick reference or as a reminder in case you forget them.  
You can make up to 3 entries in the phone memory, and more in the SIM  
depending on its capacity.  
To display ow n numbers  
1
2
3
Rotate the Jog Dial in standby mode to open the Phonebook.  
Select Phonebook menu and press the Jog Dial.  
Press the Jog Dial to select own number.  
4
Rotate the Jog Dial to select the name of  
the own number.  
5
6
Press the Jog Dial to display the number.  
Press  
to exit.  
No t e  
To save an own number entry, select a memory space using the Jog Dial. Press the  
Jog Dial and enter the number at the prompt.  
Tip  
• You can call, edit, delete and copy your own numbers.  
36GB  
Name search  
You can search for a name with Name search in the Phonebook menu.  
Input the character of the name you want to search and press the Jog Dial,  
entries beginning with that letter appear. Choose the one you want by  
rotating the Jog Dial.  
Service numbers  
The service numbers provided by your operator may not be displayed  
depending on the SIM. These numbers can not be edited.  
Memory status  
You can display how much memory is available (memory status) for SIM,  
Phone memory and the Custom.  
Memory in use  
Set the location of the memory. Select Choice and you can specify the  
location of each entry.  
37GB  
Delete all entries  
You can delete all entries. Each entry is a space in memory for the name  
and numbers . One person may have more than 3 numbers in their entry.  
All entries are erased from the phone memory, including the phone  
numbers, customs and all own numbers. Names and numbers in the SIM  
are not erased. However, the framework of entries in the SIM is erased.  
Each number remains listed individually under its name. Therefore,  
names are listed repeatedly for each number that was entered under them.  
38GB  
Me n u Op e ra t io n s  
The menu system provides you with an easy overview of your options  
grouped into separate menu points. An icon represents each menu point  
for easy recognition and the icons rotate as you scroll using the Jog Dial.  
Some menu options are network dependant. Please contact your Network  
Operator/ Service Provider for information about which options are  
available in your network.  
Selecting a menu item w ith the Jog Dial  
1
Press the Jog Dial to select the main menu  
from standby mode and rotate the Jog  
Dial to scroll through the menu options.  
2
3
Press the Jog Dial to select the menu  
option in the centre.  
Press the Jog Dial forward (or press  
) to exit a menu.  
No t e  
Your phone automatically defaults to standby mode after more than 3 minutes of  
inactivity.  
Selecting a menu item w ith the short-cut key.  
You can go to each menu by pressing the short-cut key (  
the Main menu.  
~
) from  
•
•
•
•
•
— Messages  
— Schedule  
— Clock  
•
•
•
•
•
— Ringer  
— Phonebook  
— Divert  
— Calculator  
— Settings  
— Call history  
— Memo  
Tip  
indicates that an option is on.  
indicates that an option is off.  
indicates that an option is not set.  
39GB  
READ  
/
CREATE  
/
SETTINGS  
LOCAL AREA INFO  
?
Me ssa g e s  
Choose Messages from the Main menu for  
correspondence options to create, send and read  
short messages (SMS). You can use short messages to  
send another mobile phone user a text message. The  
Jog Dial makes it easy to enter characters using the  
preview bar together with the keys.  
Read  
You hear a beep which sounds different from the  
single beep of the ringer and see the message icon  
when a new message arrives. Short messages can  
be received in standby mode or during a phone call.  
1
Select Read from the Messages menu.  
2
Scroll through the list of messages to select the message you  
want to read. The first line of the message appears in the pop  
up window.  
3
4
Press the Jog Dial to confirm. The message appears on the  
display.  
Press the Jog Dial for options to Reply, Forward, Delete, or Call  
back the number in the text.  
Tip  
• You can switch between All list and Call history by pressing the Jog  
Dial backward when you are in the Read list.  
No t e  
The capacity for storing incoming and outgoing messages depends on your SIM  
card. The message memory is full when the envelope icon blinks in the display.  
If you try to save a message when the SIM memory is full “Memory full” appears  
and you cannot save the message. Delete old messages in order to free memory  
space for new messages.  
40GB  
READ  
/
CREATE  
/
SETTINGS  
LOCAL AREA INFO  
?
SMS list icons indicate the properties of the message  
:
:
:
Received message (unread)  
Received message (read)  
Created message (stored in the SIM)  
:
This incoming message is only stored in the phone’s memory, not in  
the SIM memory. If you switch off the phone the message is  
deleted. If you want to save this message, see below. (see “Memory  
class” page 43)  
:
:
Result report  
Voice mail message  
To delete a message  
Follow the steps 1-4 in Reading messages and select Delete. After selecting  
the message you want to delete, select Yes.  
To reply to or edit a message  
Follow the steps 1-4 in Reading messages and select Reply. Then, select a  
message with the Jog Dial and edit it for the Reply message.  
To forw ard a message  
Follow the steps 1-4 in Reading messages and select Forward. After  
entering the phone number you want to send the message to, edit it for  
Forward message. You can also choose a number from the Phonebook.  
To call back the sender of a message or a number in the message text  
Follow the steps 1-4 in Reading messages and select Call back. Select a  
number that you want to call back from the numbers (up to 3) appearing  
in the SMS. You can call back one of the SMS numbers of the person that  
sent the SMS.  
41GB  
READ  
/
CREATE  
/
SETTINGS  
LOCAL AREA INFO  
?
Create  
You can create a new message.  
1
2
Select Create from the Messages menu.  
Create your message and, when finished,  
press the Jog Dial.  
On how to input the Character Table and  
T9 Text, see “Basic Operation-Standard  
Text Input” (see page 23).  
3
Enter the number to which you want to send the message using  
the keys and press the Jog Dial to confirm.  
You can select the number from the Phonebook by pressing the  
Jog Dial backward.  
4
Select Send, Save, Settings or Cancel and press the Jog Dial to  
confirm your selection.  
Tips  
• Press the Jog Dial backward during the text input for the pop up menu  
to appear. (see "Basic Operation- Text Edit" page 27)  
• If you are interrupted (e.g. incoming call) while creating a message,  
select Last message to retrieve the message and complete it continuing  
from step 2.  
Settings  
Settings allows you to customize outgoing messages including the format,  
confirmation report, etc. Some of these options may be network-  
dependant. Contact your Network Operator/ Service Provider for details.  
Select Settings from the Messages menu, then select a Settings option  
using the Jog Dial.  
42GB  
READ  
/
CREATE  
/
SETTINGS  
LOCAL AREA INFO  
?
Service centre  
Before you can send short messages, you must  
register your Service centre number via the Service  
centre option in the Messaging menu.  
If the service centre number has already been set, do  
not edit it otherwise you may disrupt your service.  
Contact your Network Operator/ Service Provider  
for details.  
You can open the SMS menu and select the number registered in your  
Service centre by pressing the Jog Dial. Then, select “Set default” to make  
the selected number the default number. You can also enter the Service  
centre number manually.  
Message tone  
Select a tone type that alerts you to reception of SMS. You can select 2  
different tones or no tone (silent).  
No t e  
If the ringer is set to Vibra alert then it overrides any other message tone  
settings in the Message tone.  
Memory class  
You have the following options:  
SIM to save the message on the recipient’s SIM card.  
Phone to save the message in the recipient’s phone.  
Screen to display the message directly on the recipient’s  
display without saving to the SIM or the phone. It is not  
recommended to send confidential messages using the Screen  
option.  
Validity period  
You can specify how long messages are stored in the service centre by  
selecting: 1 hour, 6 hours, 24 hours, 1 week, 4 weeks. The default validity  
period is 24 hours.  
43GB  
READ  
/
CREATE  
/
SETTINGS  
LOCAL AREA INFO  
?
Result report  
Choose Result report and select On if you would like to receive  
confirmation that your messages are transmitted to the recipient  
successfully.  
Message format  
Choose Message format if you would like to specify how your message is  
transmitted: SMS, E-Mail, Fax, Telex, Voice (if available). The default  
setting is SMS.  
Signature  
You can create your own signature of up to 32 characters, and choose  
whether or not to attach it when you send SMS.  
Local area info  
Local area info allows you to receive cell broadcast messages or general  
messages like weather reports, traffic reports, etc. broadcast to a group of  
phones in a certain area. Some of these options may be network-  
dependant. Contact your Network Operator/ Service Provider for details  
of availability of this service.  
1
Select Local area info from the Messages menu.  
2
Select one of the following options:  
Received info to view cell broadcast messages.  
Select channel to add or delete a broadcast channel.  
Receive to choose whether or not to receive cell  
broadcast messages.  
3
Press the Jog Dial to confirm your selection.  
44GB  
RINGER  
/
VIBRA ALERT  
MANNER MODE  
?
Rin g e r  
You can set the Manner mode or the Vibra alert.  
Also, you can select the ringer type and adjust the  
volume and tone.  
Ringer  
You can adjust the ringer volume, select the ringer type and edit and save  
your favourite melody.  
Ringer volume  
You can select one of the 6 levels of the ringer volume or turn the ringer  
off.  
Jog Down  
Off  
Jog Up  
Icon  
Pop up  
window  
Level 1  
Level 2  
Level 3  
Level 4  
Step up Step down  
Select the ringer volume from the Ringer menu and then select from  
among the 7 ringer volume levels using the Jog Dial.  
Tip  
•
appears in standby mode to remind you when you have turned the  
ringer off (level 0).  
You can also quickly turn the ringer on/off or to single beep by  
pressing the Jog Dial or adjust the volume during an incoming call  
(while ringing) by rotating the Jog Dial.  
No t e  
Even if you set the Vibra alert (see page 49), when the Ringer volume is off the  
Ringer volume icon has priority in the display.  
45GB  
RINGER  
/
VIBRA ALERT  
MANNER MODE  
?
Ringer tone  
You can select from among 27 different pre-set ringer tones in the ringer  
tone setting. You can even add 3 more ringer tones using the ringer  
composer.  
You can compose and save up to 3 melodies (see also “Ringer composer”  
below). Select ringer tone from the Ringer menu. The current setting for  
the tone is displayed. Select from among 30 tone types using the Jog Dial.  
You can listen to the sound of the ringer tone type by moving the cursor to  
the selection.  
Group ringer tone  
You can set the ringer tone for every group saved in the Phonebook.  
However, you can not set the ringer tone for every name or number.  
Ringer composer  
You can compose your favorite melodies.  
The Ringer composer menu has the following functions:  
Compose to input your favorite melody using musical notes.  
Edit title to add the title to the saved melody.  
Play to play the melody.  
Compose  
Number of Tone  
Key Board, "P" = Pause  
Cursor Area  
Select Item Area  
Entered Music  
46GB  
RINGER  
/
VIBRA ALERT  
MANNER MODE  
?
1
2
Select Composer in the ringer composer mode and press the Jog  
Dial.  
Rotate the Jog Dial to select the tone and press the Jog Dial.  
• To hear the following 3 octaves, rotate the Jog Dial.  
C — Octave lower  
C — Original tone  
C — Octave higher  
• The half-tone is displayed in grey.  
• To enter a musical pause, select “P” from the keys.  
3
Select the musical length and press the Jog Dial.  
If you selected musical pause in step 2, select the length.  
4
5
By repeating steps 1 through 3, you can create various  
melodies.  
After entering the melody, press the Jog Dial backward to  
display the Sub menu. Select “Save”.  
Tip  
• You can display the Sub menu by pressing the Jog Dial backward while  
entering the melody.  
Play:To play the melody. You can play a melody while composing.  
Move:To move the position of the cursor.  
Tempo:To set the tempo of the melody. The default setting is  
Moderate.  
Save:To save the entered melody.  
Cancel:To cancel the entered melody.  
47GB  
RINGER  
/
VIBRA ALERT  
MANNER MODE  
?
You can directly enter the melody with the keys by pressing the Jog  
Dial.  
Entering tones  
Change the octave by pressing  
each key a number of times.  
C# D#  
F# G# A#  
Original Tone  
C
D
E
F
G
A
B
An Octave Higher-Tone  
An Octave Lower-Tone  
Original Tone  
Musical length =  
Entering musical pause =  
Change the length by pressing  
several times.  
Change the pause by pressing  
several times.  
Edit title  
Attach a title to the entered melody (see “Standard Text Input” page 23).  
Play  
To play the entered melody.  
48GB  
RINGER  
/
VIBRA ALERT  
MANNER MODE  
?
Vibra alert  
You can set the vibration of the Vibra alert indicating a call. This feature is  
available for Alarm and Message tone.  
On: Vibra alert is set to on.  
Off: Vibra alert is set to off.  
t
: After the Ringer rings, the Ringer mode changes to the  
Vibrator mode.  
t
: After the phone vibrates, the Vibrator mode changes to  
the Ringer mode.  
No t e  
• Changing the mode between Ringer and Vibra alert takes 3 seconds.  
• If Vibra alert is on, the Message tone and Alarm as well as the Vibra alert  
function.  
• Even if you set the Vibra alert, when the Ringer volume (see page 45) is off the  
Ringer volume icon has priority in the display.  
Manner mode  
Select one from 3 types of Manner modes.  
Select Manner mode from the Ringer menu and then select one of the  
following manner modes using the Jog Dial:  
Silent  
: Ringer is off. Also Vibra alert is off.  
: Ringer beeps only once.  
Single beep  
Vibra alert only : Vibra alert is set to on. Ringer is off. SMS  
alarm can be also informed by Vibra alert.  
Manner off  
: Manner mode is off. The icon is not  
displayed in the top icon area.  
No t e  
Once you have set the Manner mode, the Ringer and Vibra alert modes do not work  
even if you set them.  
49GB  
SCHEDULE  
Sch e d u le  
The schedule has many features. You can display the  
calendar, save your daily schedule and set alarms for  
important meetings or tasks.  
The window of the monthly calendar is displayed as  
follows.  
(light gray) : Sundays.  
7
7
(dark gray) : An event is scheduled for that day.  
Tip  
• When the Calender is displayed, press the Jog Dial backward to display  
the Menu. The Menu has detailed scheduling functions.  
Eve n t list  
To review all your events in a list.  
Mo n t h  
To display the specified monthly calendar.  
We e k  
To display the monthly calendar including the specified week.  
To d a y  
To return the cursor to the Today window.  
Me m o ry  
To display the amount of memory being used for your saved  
schedules.  
De le t e a ll  
To entirely delete all schedules both current and old.  
50GB  
SCHEDULE  
Daily event list  
You can display your daily schedule, which holds up  
to 4 events. Then, check it by rotating the Jog Dial.  
Select the day from the calendar and press the Jog  
Dial. Then select New event and press the Jog Dial  
to save a new event.  
Schedule menu  
You can edit or delete events that are already saved.  
Select the Daily item from the Daily event list and select Menu item by  
press the Jog Dial.  
Edit  
To edit the time, icon and details.  
Delete  
To delete the displayed schedule.  
Repeat  
To repeat recurring events weekly, monthly or yearly.  
Alarm  
To set the alarm. You can also set 5 minutes before the specified time.  
No t e  
You can save up to a maximum of 500 events.  
51GB  
ALARM  
/
TIMER  
…
/
?
WORLD CLOCK  
TIME SIGNAL  
?
Clo ck  
The clock has many features. You can set an Alarm or a Time to  
automatically switch off your phone every day. It also displays the current  
date and time in standby mode.  
Alarm  
Select Alarm from the Clock menu. Use the Jog Dial and the keys in the set  
mode to enter the time you want the alarm to ring.  
Repeat daily allows you to repeat the alarm at the same time every  
day.  
Alarm tone allows you to select the alarm tone.  
No t e  
When you set the Silent mode in Manner mode, the alarm does not ring even  
though the alarm has been set.  
If the Vibra alert in the Ringer has already been set to on, the Vibra alert overrides  
any setting for the Alarm tone.  
Tip  
• The alarm rings for about 40 seconds. Press any key to turn off the  
alarm. The alarm does not ring during a call, it switches to the vibrator,  
and then rings on completion of the call. The alarm rings even when  
the power is off (and the battery is inserted).  
Timer  
Select Timer from the Clock menu. Use the Jog Dial and the keys to set the  
timer. When stop is selected or the time is up, a bell rings.  
52GB  
ALARM  
/
TIMER  
…
/
?
WORLD CLOCK  
TIME SIGNAL  
?
World clock  
This phone has a World clock function.  
Select World clock from the Clock menu and press  
the Jog Dial to display the world map.  
You can select city by rotating the Jog Dial. The name  
of the city and its phone code are displayed in the  
pop up window.  
This status changes to the standby mode with the phone code by pressing  
.
The time in your home city is displayed on the top-left of the screen.  
Tip  
• You can select city directly by pressing the Jog Dial backward from the  
world map. Save up to 6 cities by selecting Add city.  
Press the Jog Dial to display the following menu when in the world  
map screen.  
City name: To change the name and location of the city.  
Clock: To change the time.  
Phone code: To change the country code and the dialling code.  
Summer time: To change to summer time. If summer time has been  
selected, it will be active from the last Sunday in March to the last  
Sunday in October and the standard time will be one hour ahead.  
Set home: To set as the home city.  
Delete: To delete.  
No t e  
You cannot change or delete the times for the pre-set cities.  
Time signal  
You can set your phone to ring or vibrate on the hour.  
53GB  
ALARM  
/
TIMER  
…
/
?
WORLD CLOCK  
TIME SIGNAL  
?
Clock format  
Select the style of time to be displayed and it appear in standby mode.  
Analogue  
Set whether or not to show an analogue clock when the flip cover is  
closed.  
Auto pow er off  
The Auto power off function turns your phone off at a specified time.  
Activate Auto power off once, and the phone turns off at the same time  
every day.  
Set Auto power off from the Clock menu. Use the Jog Dial and the keys to  
enter the time in the set mode you want to turn off your phone.  
No t e  
If auto power off occurs during a call, the phone does not turn off until after the call  
is completed.  
Set the day/time  
Select set from the Clock list menu. Use the Jog Dial and the keys to enter  
the day, month, year (DDMM20YY). Enter the hour and minutes (HHMM  
in a 24 hour clock format) and then select “OK”. To correct the entry, press  
.
54GB  
ALL CALLS  
/
IF NOT REACHABLE  
IF NO REPLY  
…
?
?
Dive rt  
Choose Divert, also known as “Call forwarding”,  
from the Main menu to forward incoming calls to  
another phone number depending on certain  
conditions in which you do not answer the call e.g.  
divert to your Voice mail if you are not reachable.  
You may need to register for this service with your  
Network Operator/ Service Provider.  
If unavailable  
To divert calls of your phone is switched off, out of network coverage, if  
you do not answer the call after a certain period of time, or when you are  
on the phone.  
All calls  
To divert all calls unconditionally (the phone will not even ring).  
If not reachable  
To divert incoming calls when your phone is switched off or out of  
network coverage.  
If no reply  
To divert incoming calls if you do not answer the call after a certain period  
of time.  
If busy  
To divert incoming calls when you are on the phone (line engaged).  
All fax  
To divert all fax calls (the phone will not even ring).  
All data  
To divert all data calls (the phone will not even ring).  
Cancel all  
To clear all active diverts.  
No t e  
appears in standby mode when a divert is set.  
55GB  
ALL CALLS  
/
IF NOT REACHABLE  
IF NO REPLY  
…
?
?
Setting a divert  
1
2
3
Select the Divert menu from the Main menu.  
Select a Divert option using the Jog Dial (e.g. If not reachable).  
Select Activate to set the chosen divert  
condition.  
4
5
Select Voice mail to divert calls to your Voice mail or Other  
number to choose a number from the Phonebook. You can also  
enter the number manually using the keys.  
Wait for confirmation from the network.  
In step 3, you also have the option to cancel or check status. Select  
“Cancel” to cancel the divert; then wait for the network response. Select  
the option “Check status” to check the divert settings. Wait for the  
network response and then you can view the current status on the display.  
No t e  
If the returned response is “Failed”, the network was unable to set, clear or check  
the selected Divert.  
56GB  
CALCULATOR  
Ca lcu la t o r  
The Calculator can perform addition (+), subtraction (–), multiplication (x)  
and division (÷), and even percentage (%) calculation.  
• Press  
to go through the mathematical operations of +, –, x, and ÷  
in that order.  
• Press  
to display “%”.  
• Press  
to clear the entered value and the result.  
to start a new calculation while using the calculator.  
• Press the  
1
Select Calculator from the Main menu. The assigned keys will  
be displayed.  
2
3
4
Enter a number.  
Press  
Press  
to select the operand and then enter another number.  
to select = for the result.  
In this example we are going to subtract 20% from 120.  
1
2
0
2
0
Rate conversion  
You can also use the calculator as a currency calculator as an easy way to  
convert prices from one currency to another.  
Display the pop up menu by pressing the Jog Dial backward and select the  
desired Currency exchange rate. Press the Jog Dial to display the  
converted price on the Calculator.  
Also, the exchange rate has the following functions in Settings on the pop  
up menu list. Make sure of specifying the rate whenever adding a new  
currency.  
Home currency to set your home currency.  
Foreign currency to set foreign currency.  
Currency list to list currency and to enter  
currency newly up to 5 currencies included  
original’s.  
57GB  
CALL HISTORY  
Ca ll Hist o ry  
Call history tracks a total of 30 received and dialed calls. (The number of  
received or dialed calls may vary depending on your Network Operator/  
Service Provider). The caller's name is displayed in Call history if their  
name is in your Phonebook.  
1
Select the Call history from the Main menu or press  
standby mode.  
in  
2
Scroll up or down using the Jog Dial to  
highlight the desired number or name  
from the list. The time stamp for the  
selected Call history appears in the pop  
up window.  
3
Keep the Jog Dial pressed if you find the number that you are  
looking for.  
Select Delete all to delete all lists at the end of the list.  
Tip  
• Press the Jog Dial backward to select between All calls list, Last dialled  
numbers list or Missed/Received calls list in Step 1.  
Outgoing call  
Outgoing call (Voice memo)  
Incoming call  
Incoming call (Voice memo)  
Missed call  
Answering machine  
No t e  
Support of the Call history entries requires Caller ID (Caller Line Identification).  
When the Call history memory is full, the oldest number is deleted automatically to  
provide space for a new entry.  
58GB  
CALL HISTORY  
Call history menu  
To save, copy, etc. numbers from the Call history, select the Call history  
menu then press the Jog Dial.  
Call  
To call the displayed number.  
Save  
To save the new name in the Phonebook. Also, to copy the numbers  
displayed in the Phonebook.  
Change  
To change the displayed phone number.  
Delete  
To delete the number and name displayed.  
Voice memo  
To play the saved Voice memo.  
59GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Se t t in g s  
Preferences  
Choose Preferences from the Main menu settings and unpack the bag of  
options to personalize your phone according to your preferences like  
which language your phone speaks, even how the keys sound!  
When you receive your phone, it has the following default settings.  
item  
default  
Auto  
Key click  
Off  
reference  
page  
60  
Language  
Language  
Key click sound  
Greeting message  
Animation  
Key click sound  
Greeting message  
Animation  
61  
61  
Stream  
On  
61  
Backlight  
Backlight  
61  
LCD contrast  
Select network  
Priority list  
Factory reset  
—
LCD contrast  
Select network  
Priority list  
61  
Auto  
—
61  
61  
—
Factory reset  
61  
Language  
The Language setting allows you to select the language in which all  
options appear.  
Select Language from the Preferences menu and then use the Jog Dial to  
select the appropriate language.  
Select automatic and the display changes to the language set in the SIM.  
60GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Key click sound  
You can adjust the key sounds to DTMF tones, Key click or Silent in the  
Key sound settings.  
Greeting message  
The Greeting message menu allows you to turn on/ off or to edit the  
greeting text which appears when you turn your phone on.  
Animation  
You can choose one of 3 animations to display when you turn on the  
phone.  
Backlight  
Use this setting. You can choose to turn the Backlight of the keys and  
display on or off. If the Backlight is switched off, your phone’s battery  
charge lasts longer.  
LCD contrast  
You can set the contrast of the LCD to be brighter or darker.  
Select netw ork  
This feature gives you the option to select a network automatically when  
you turn on your phone or manually from a list of available networks.  
Priority list  
Choose Priority list to edit the automatic network selection priority list.  
This feature is helpful for example to prioritize roaming partners, etc.  
Add network to add a network operator to the list.  
Move to adjust the order in which the names appear in the list.  
Delete to remove a network operator from the list.  
Factory reset  
The Factory reset allows you to perform a master reset of all of your  
phone’s settings back to the factory settings except Phonebook, Schedule  
and Network or SIM card-based settings. Note that this will restart your  
phone.  
61GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Security  
The Security options allow you to control who uses your phone as well as  
their calling privileges. However, emergency calls (SOS) are always  
possible regardless of the restrictions/ codes you set.  
PIN code  
Your Network Operator/ Service Provider provides a  
PIN number with your SIM card. The menu offers  
you the possibility to change your PIN code or to  
enable/ disable the PIN code prompt.  
Im p o rt a n t  
You only have 3 attempts to enter the correct PIN code. If the third try fails, your  
PIN is blocked and you must enter your PUK (Personal Unblocking Key) also  
provided with your SIM card. You have 10 attempts to enter the PUK code  
correctly. After the tenth wrong entry, your SIM card is completely blocked and  
you must contact your Network Operator/ Service Provider for a replacement card.  
Please note that all phonebook entries stored on the SIM will be lost it a  
replacement SIM is required.  
Enabling/ Disabling the PIN code  
When the PIN code is enabled, your phone prompts you to enter the  
PIN code each time you turn on the phone.  
1
Select PIN code from the Security menu and press the Jog  
Dial to confirm your selection.  
2
3
Select On/ Off to enable/ disable the PIN code.  
Enter the PIN code and press the Jog Dial to confirm. The  
PIN is enabled/ disabled.  
62GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Changing the PIN code  
You can change your PIN code to any 4-8 digit number. Your PIN  
code can only be changed if the PIN control is switched on.  
1
2
3
Select PIN code from the Security menu.  
Select Change.  
Enter the old PIN code at the prompt and press the Jog Dial  
(or ) to confirm your entry.  
4
5
Enter your new PIN code (4-8 digits) and press the Jog Dial  
to confirm.  
Repeat the new PIN code entry for verification and press  
the Jog Dial to confirm. If successfully verified, the new  
PIN is effective immediately.  
No t e  
If the PIN code is disabled, the risk of unauthorised use of your phone is greater.  
The disabling of the PIN control is SIM card dependent. Contact your Network  
Operator/ Service Provider for details.  
PIN2 code  
PIN2 is a code provided by your Network Operator/ Service Provider and  
is required for access to some features such as FDN Phonebook or Call  
costs. These features are not supported by all networks. Contact your  
Network Operator/ Service Provider for details.  
63GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Barring service  
Please note that this service may not be unavailable on all networks.  
Please check with your Network Operator/ Service Provider for details.  
Choose Call barring service from the Security menu to bar calls made from  
your phone. This feature can be especially useful e.g. if you lend your  
phone to someone else but do not want them to make international calls.  
The restrictions in the Call barring service menu require the Barring  
password.  
All outgoing calls  
To restrict all outgoing calls except emergency calls (112, 999, etc.).  
International  
To restrict all international calls.  
Int. except home  
To restrict all outgoing international calls except those to your home  
country.  
All incoming calls  
To restrict all incoming calls.  
If abroad  
To restrict all incoming calls when you are outside of the coverage  
from your registered Network Operator e.g. when abroad.  
Cancel all  
To cancel all settings of Call barring service.  
Barring passw ord  
Some of the restrictions in the Security menu are controlled in the network  
e.g. Call barring. Your Network Operator/ Service Provider provides a  
(Network) password if you register for one or more of these network call  
restrictions (Call barring).  
Select Barring password from the Security menu to change the barring  
password. Use the Jog Dial to enter the old password and then enter your  
new password (4 digits). Enter the new password again and press the Jog  
Dial.  
64GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
No t e  
If the message “Invalid” appears, the password you entered is incorrect.  
If you have difficulties, please contact your Network Operator/ Service Provider.  
Personal lock  
The Phone lock prevents unauthorized use of your phone if it is stolen or  
if the SIM card is exchanged. The security code is not set when you buy  
the phone. You can change the security code (0000) to any four-to-eight  
digit code.  
No t e  
A security code is required for the functions “Call time reset”, “Factory reset” and  
“Delete all entries”.  
On  
If the phone lock is set to “on”, you are requested to enter the all  
phone lock code every time you turn on the phone.  
Off  
The security code is not used.  
If other SIM  
This setting is necessary when you are using a different SIM card.  
Change code  
The security code is changed.  
65GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Call time, cost  
The Call time, cost option offers ways to track or control how long you are  
on the phone and the cost of calls you have made. So that Call costs can be  
used as a security measure e.g. when you lend your phone to someone,  
you must use your PIN2 as a security code when you set or change  
options. Some of the options in the Call costs menu may not be supported  
in your network. Contact your Network Operator/ Service Provider for  
details.  
Call time  
To check the duration of your last call and total calls (incoming and  
outgoing)  
Select Call time from the Call Data menu. Rotate the Jog Dial to select the  
time you want to check.  
Call cost  
To check the cost of your last call, total calls and remaining credit.  
Select Call cost from the Call Data menu. Use the Jog Dial to select the cost  
you want to check.  
Call time reset  
Select Call time reset and enter your security code at the prompt. Then  
press the Jog Dial to reset the Call time.  
No t e  
Enter the security code to reset the call time.  
66GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Call cost setting  
Select Charge rate to set the currency and price per unit which your phone  
uses to calculate the call cost.  
Charge rate  
Select Charge rate and enter your PIN2 code at the prompt. Enter a  
monetary denomination and the price per unit using the keys (To  
enter a decimal point, press  
or  
).  
Charge limit  
Select Charge limit to set a unit figure at which your phone will not  
allow any more phone calls to be made. (If you have selected Unit in  
the Charge rate menu (see above), enter the Unit value. In case of  
Currency, enter the Currency value.)  
Select Call cost setting from the Call Data menu. Enter your PIN2 code  
at the prompt, then set the charge limit using the Jog Dial.  
Call cost reset  
Select Call cost reset from the Call cost setting, enter your PIN2 code  
and then reset the call cost.  
No t e  
Reset the Call cost counter or enter a higher limit in order to be able to make phone  
calls again.  
67GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Call settings  
You can set the related functions for calling.  
Caller ID  
Caller ID allows you to choose whether or not you want the party you are  
calling to see your phone number. This feature may not appear in some  
networks.  
Select Caller number from the Call settings menu. Use the Jog Dial to  
select On, Off or Default (network default).  
No t e  
Some networks do not allow you to turn off Caller number. Contact your Network  
Operator/ Service Provider for details.  
Call w aiting  
Set the Call waiting feature for your phone to alert you (beep) that a call is  
waiting so that you don’t miss any calls. You may need to subscribe to this  
service. Contact your Network Operator/ Service Provider for details.  
Select Call waiting from the Call settings menu. Use the Jog Dial to  
activate Call waiting and then wait for the response to appear.  
Tip  
• See also the chapter During a Call for options such as Call hold for tips  
on how to handle 2 calls at the same time.  
Any key answ er  
Any key answer lets you answer a call by pressing any key.  
Select Any key answer from the Call settings menu. Use the Jog Dial to  
select On or Off.  
No t e  
You cannot use  
,
to answer a call.  
68GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
1 minute beep  
You can turn on the 1 minute beep setting to be reminded (beep) in  
1 minute intervals while you are on the phone.  
Auto redial  
The Auto redial setting offers you the option of automatically redialling an  
engaged line until it is no longer busy. Select Off if you do not want to  
have the Auto redial option appear each time you call a number which is  
busy. This feature may not appear in some networks.  
No t e  
An incoming call will interrupt the Auto redial feature.  
Show call time  
You can set whether or not to display the elapsed time of your call.  
Auto answ er  
Auto answer programs your phone to answer an incoming call.  
Auto answer only works together with the Handsfree car kit or the  
Headset accessory.  
DTMF tones  
You can choose to turn on or off the DTMF tones which are emitted when  
pressing a key during menu prompts e.g. during your Voice mail or other  
services.  
Flip call  
Flip call allows you to answer incoming calls by opening the flip cover  
and to end the call by closing it.  
69GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Data services  
You can send and receive faxes and data when the phone is connected to  
the optional EasyCom or PC Card accessory (see also the operating  
instructions of the accessory for use with the CMD-Z5).  
Speech then fax  
Switch the Speech then Fax setting to On to make a phone call and  
then send a fax. When the phone is not connected to the EasyCom or  
PC Card accessory, Off should be selected.  
Select Data services from the Call settings menu. Select Speech and  
then Fax. Use the Jog Dial to select On or Off.  
Serial speed  
Select Data services from the Call settings and then select Serial speed.  
Tip  
• Select Automatic for automatic detection of the Serial speed. In order  
for the phone to detect the Serial speed correctly, enter an “AT”  
command, whereafter the phone responds with “OK”. For a list of  
“AT” commands, please refer to the operating instructions supplied  
with the PC Card or EasyCom accessory.  
70GB  
PREFERENCES  
/
SECURITY  
CALL SETTINGS  
?
CALL TIME, COST  
?
Select line  
Check with your Network Operator/ Service Provider on availability of  
this service. Select line is a feature offered by some Network Operators  
giving you the possibility to select between two separate phone lines on  
your SIM card. This can be useful if for example you want to use your SIM  
card for both business and private calls but you want to keep the costs  
separate. You can even divert your business line to your Mailbox after  
business hours and only receive private calls. This feature may not appear  
in some networks. To make a line selection in standby mode, keep  
pressed and use the Jog Dial to make your selection. 1 or 2 will appear in  
standby mode so that you always know which line is active.  
No t e  
Some menu items may not appear in your phone in some networks unless you  
specifically subscribe for them. The following settings (e.g. Divert, Security, Ringer  
type, Call waiting and Voice mail) will apply to the currently selected line. Some  
items such as your own number entry and Voice mail entry may not be edited. All  
calls made will be billed to the currently selected line. The Call time, Call cost  
settings, however, will always show the total time or cost of both lines.  
71GB  
VOICE MEMO BOX  
/
RECORD VOICE  
ANSWERING MACHINE  
?
Me m o  
The Memo function programs your phone to play the Answering message  
when you receive an incoming call and record the message of the caller.  
Tip  
• You can save up to a total of 10 messages and Voice memos. Each  
message and Voice memo can be up to 20 seconds long.  
Voice memo box  
Voice memo box allows you to play the recorded Voice memo.  
1
Select Voice memo box from the Memo  
menu.  
2
Rotate the Jog Dial to select the already  
recorded item. If the other party is a  
subscriber of the number display service,  
the number is displayed in the pop up  
window.  
3
Pressing the Jog Dial allows you to do the following.  
Play to play the recorded Voice memo.  
Stop to stop playing the Voice memo.  
Delete to delete the saved Voice memo one by one.  
Delete All displayed on the bottom line of the list to delete all  
recorded Voice memos.  
Tip  
• In the standby mode, you can playback memos by pressing  
.
72GB  
VOICE MEMO BOX  
/
RECORD VOICE  
ANSWERING MACHINE  
?
Record voice  
You can save memos.  
1
2
Select Record voice from the Memo menu.  
Select Record and press the Jog Dial.  
3
Select Stop when you finish your recording and then press the  
Jog Dial.  
Tips  
• You can record the conversation during a call by pressing  
• In the standby mode, you can record a memo by keeping  
pressed.  
.
Answ ering machine  
You can set the Answering machine.  
It is possible to save an announcement message of up to 20 seconds.  
Use the Jog Dial to Save, Play and Stop.  
1
Select Answering machine from the Memo menu.  
2
Rotate the Jog Dial to select the followings.  
All calls to set the answering machine to answer all  
incoming calls automatically.  
Assign caller to set the Answering machine to answer the  
specified number.  
Then select a name from the Phonebook and press the Jog  
Dial backward. If the person has several numbers all  
numbers are assigned.  
Off to clear the Answering machine setting.  
Announce to record the message of the Answering  
machine.  
3
Press the Jog Dial to confirm your selection.  
73GB  
VOICE MEMO BOX  
/
RECORD VOICE  
ANSWERING MACHINE  
?
Tips  
• You can turn on the Answering machine in the standby mode by  
keeping pressed. When the flip cover is closed, keep the Jog Dial  
pressed to turn on the answering machine.  
• If you want to turn on the Answering machine while the phone is  
ringing, press  
. The caller hears your announcement. It only works  
when you have already recorded an announcement message.  
Im p o rt a n t  
• You are responsible for the confidentiality of the recording.  
• You must ask the person you are on the phone with for permission before  
recording.  
No t e  
• The Answering machine is not available when you are outside the service area.  
• Before using the Answering machine, you have to record your announcement  
message.  
• Assign caller is not available for incoming calls that do not have a caller ID  
function.  
74GB  
Ap p e n d ix  
Tro u b le sh o o t in g  
Problem  
Possible Causes  
Possible Remedies  
Unable to  
switch on  
Empty battery  
Charge the battery.  
Defective battery  
Replace the battery. Note that after  
several years, gradual decline is  
normal.  
The  
icon  
Weak signal  
Move to an open space or nearer to a  
window.  
appears  
Outside GSM  
coverage area  
SIM not valid  
Network access not  
allowed  
Check operator coverage map.  
Call your service provider.  
Try manual network search.  
Calls not possible Dialling error  
Use full national area code. When  
abroad, use also international access  
code to reach home country.  
All calls barred  
Call barring set  
Check (Password is needed to clear).  
Another SIM inserted Check for new restrictions.  
Check outgoing call barring settings.  
Adjust earpiece volume, and reduce  
noise around you.  
Difficult to hear  
the other party  
Phone loses  
network  
____  
Weak signal  
Reconnection, or connection to  
another operator is automatic.  
Switching phone off and on may  
accelerate this.  
SIM error  
Damaged SIM card  
Network does not  
recognise the SIM card  
Call barring set  
Please contact your service provider.  
Please contact your service provider.  
SIM card not  
registered  
Not able to  
receive calls  
Check incoming call barring settings.  
Check call divert settings.  
Divert set  
75GB  
Un b lo ckin g t h e SIM Ca rd  
If you enter the PIN code incorrectly 3 times, the SIM card is blocked.  
To enter the unblock code (PUK) to unblock the SIM proceed as follows:  
1
2
Enter the unblock code and press the Jog Dial (or press  
).  
Enter the new PIN (4-8 digits) and press the Jog Dial (or press  
).  
3
Enter the new PIN code again and press the Jog Dial (or press  
).  
The SIM is unblocked.  
No t e s  
•
•
If you enter the wrong unblock code (PUK) 10 times, your SIM is blocked  
completely. In this case contact your Network Operator/ Service Provider.  
In order to receive more information (SIM and PUK), please contact your  
Network Operator/ Service Provider.  
76GB  
Te ch n ica l Sp e cifica t io n s  
E-GSM 900 Mobile Telephone  
GSM 1800 Mobile Telephone  
Frequency Range (Transmission)  
Frequency Range (Reception)  
Weight  
Class 4 ( 2 Watts )  
Class 1 ( 1 Watt )  
880-915 MHz and 1710-1785 MHz  
925-960 MHz and 1805-1880 MHz  
82.5g  
Size (Flip closed, excluding the antenna part) 88 49 21.5  
Handset Operating Temperature  
Accessories Operating Temperature  
10 °C  
+55 °C  
0 °C  
+45 °C  
Licensing  
Your CMD-Z5 is authorised for use in GSM 900/ 1800 networks and  
complies with EU standards.  
• 89/ 336/ EEC “Electromagnetic Compatibility”  
• 98/ 13/ EC CTR 19, CTR 20, CTR 31 and CTR 32  
confirmed by the CE mark.  
• 95/ 54/ EC “Car Automotive Directive”  
Applies to accessories used in vehicles  
confirmed by the e mark.  
Sony reserves the right to make changes or improvements to any of the  
products described in this guide without prior notice.  
T9TM text input is a registered trademark of Tegic Communications Inc.  
77GB  
In d e x  
Call settings ............... 68  
Call time ..................... 66  
Reset ..................... 66  
Call waiting ............... 68  
Caller ID ..................... 68  
Calls ............................ 17  
Answering ........... 18  
Ending ................. 18  
Making ................. 17  
Character Table ......... 23  
Charge limit ............... 67  
Charge rate ................ 67  
A, B  
H, I, J, K  
ABC sort list ............... 31  
Advanced Jog Dial  
........................... 6, 8  
Alarm .......................... 52  
Analogue .................... 54  
Animation .................. 61  
Announce ................... 73  
Answering calls ......... 18  
Hand strap ................... 7  
Icons ............................ 10  
Key click sound ......... 61  
Keys .............................. 6  
L. M  
Language ................... 60  
LCD contrast ............. 61  
Licensing .................... 77  
Local area info ........... 44  
Manner mode ....... 9, 49  
Memo .............. 9, 22, 72  
Answering machine  
......................... 9, 73  
Antenna ........................ 6  
Any key answer ........ 68  
Auto answer .............. 69  
Auto power off .......... 54  
Auto redial ................. 69  
Backlight .................... 61  
Battery pack ................. 6  
Charging .............. 13  
Clear key  
............ 6  
Clock ........................... 52  
Clock format .............. 53  
Memo key  
.......... 6  
Menu ........................... 39  
Menu Overview ........ 11  
Messages .................... 40  
Microphone ................. 6  
D, E, F, G  
Display ......................... 6  
Divert .......................... 55  
Setting .................. 56  
Inserting .............. 13  
N, O, P  
Ear piece ....................... 6  
Emergency calls ........ 15  
Ending calls ............... 18  
External connector ...... 6  
Factory reset .............. 61  
Flip .................... 6, 7, 69  
Flip call .................. 7, 69  
Greeting message ...... 61  
Group sort list ........... 31  
Removing ............ 13  
Battery release hook ... 6  
Name search .............. 37  
On/ Off key  
......... 6  
One minute beep ....... 69  
Personal lock ............. 65  
Phonebook ............ 9, 28  
C
Calculator ................... 57  
Call barring ................ 64  
Call cost ...................... 66  
Call history ................ 58  
Call hold ..................... 20  
Creating Entries  
....................... 29, 36  
Editing ................. 33  
Grouping ............. 32  
78GB  
Making Calls ....... 31 Service centre ............. 43  
Own number ....... 36 Settings ................ 42, 60  
Saving Entries ..... 30 Short-cut key ............. 39  
Voice mail setup . 35 Show call time ........... 69  
PIN code ..................... 62 Signal strength .......... 16  
Changing ............. 63 Silent mode ................ 49  
Disabling ............. 62 SIM card ..................... 12  
Enabling ............... 62  
Entering ............... 15  
Inserting .............. 12  
Removing ............ 12  
PIN2 code ................... 63 Standard Text Input .. 23  
Preference .................. 60  
T, U, V, W, X, Y, Z  
Priority list ................. 61  
T9 Text Input ............. 25  
Technical Specifications  
Q, R, S  
.............................. 77  
Text Edit ..................... 27  
Timer ........................... 52  
Vibra alert .................. 49  
Voice mail ..................... 9  
Setting up ............ 35  
Voice memo box ........ 72  
Volume  
Rate conversion ......... 57  
Record voice .............. 73  
Ringer .................... 6, 45  
Compose .............. 46  
Silent mode ......... 49  
Single beep .......... 49  
Tone ...................... 46  
Type ...................... 46  
Ringer .................. 19  
Speaker ................ 19  
World clock ................ 53  
Volume .......... 19, 45  
Roaming ..................... 16  
Schedule ..................... 50  
Security ....................... 62  
Select line ................... 71  
Select network ........... 61  
Send key  
.............. 6  
79GB  
Sony Corporation Printed in Japan  

Yamaha CRW2100FXZ User Manual
West Bend Coffeemaker User Manual
Toshiba 2032SP User Manual
Sony Xperia L C2104BLK User Manual
Sony CRX 160E User Manual
Seagate SAVVIO ST300MM0026 User Manual
Seagate Barracuda ST3200826A User Manual
RCA RC85I User Manual
Philips AJ3051 User Manual
Panasonic SC PM9 User Manual