Sonic Alert Clock SB1000 V3 User Manual

2) If within 1 minute no black button on the front is pressed, then  
it will exit the Test Mode and return back to the Time Mode.  
3) While in Test Mode, sliding the Outlet Switch will demonstrate  
the different functions of the clock.  
4) After you are finished with the Test Mode, press any button  
(expect the Snooze, Time and Lamp buttons, which has no  
effect) it will exit the Test mode immediately.  
time  
* Press and hold the ALARM button (5) for six seconds. The clock  
display will show the default alarm duration as ‘30’, release the  
ALARM button.  
Pressing the blus SNOOZE button will turn the alarm signals off for  
nine minutes. After nine minutes, the alarm will go on again.  
Pressing the ALARM OFF button will turn the alarm off and  
automatically reset the alarm to go on at the same time the next day.  
Setting the OUTLETS switch to OFF turns off the alarm. The alarm  
will not go off again until you set the OUTLETS switch back to  
LAMP, VIB, or BOTH.  
Adjusting The Snooze Duration  
The default snooze duration setting is 9 minutes but you may adjust  
the snooze duration between 1 minute and 30 minutes as desired.  
To adjust the snooze duration:  
* Press and hold the SNOOZE button for four seconds. The clock  
display will show the default snooze time ‘9’.  
* Press the “MIN” button to adjust the snooze duration to the desired  
setting, from 1 minute to 30 minutes.  
* When the display is showing the desired snooze duration, it will  
return to the normal clock mode after 3 seconds. The new snooze  
duration setting becomes the new default and remains in the  
memory until you change it again.  
Dimmer Operation  
Auto dimmer built in.  
Battery Backup  
In the event of a power interruption, the Sonic Boom alarm clock can  
use battery to save your time and alarm settings until power is  
restored.  
To use battery backup, you can install a 9V battery (not provided) in  
the clock.  
• DB100/200 Doorbell Signaler  
• TR75VR Telephone Signaler  
• BC400 Baby Cry Signaler  
To turn the clock’s remote receiver on for use with a remote  
transmitter, locate the RECEIVER ON/OFF button and set it to ON  
Working with Remote Transmitter  
Press and hold the ALARM OFF button for 3 seconds to toggle  
RECEIVER between ON/OFF status. There is a round indicator light  
at the top right corner to indicate status. The software default setting  
is ON.  
If you are not using Sonic Alert remote transmitters, or if you do not  
want the clock to respond to a transmitter, set the mode to OFF.  
Receiver On/Off  
Button  
2) Si dentro de 1 minuto no se pulsa ningún botón negro situado en la  
parte delantera, entonces saldrá del modo de prueba y volver al modo  
de hora.  
3) En el modo de prueba, deslizando el interruptor de salida demostrará  
las diferentes funciones del reloj.  
4) Después de que haya terminado con el modo de prueba, pulse  
cualquier botón (esperar que el Snooze, Tiempo y botones de las luces,  
que no tiene ningún efecto) saldrá del modo de prueba inmediatamente.  

Troy Bilt Chipper CS4210 User Manual
Transcend Information ExpressCard TS32GSSD34E M User Manual
Toshiba MK1032GAX User Manual
Technics sl mc410 User Manual
Sony FX181 User Manual
Sears 247780891 User Manual
Philips FLAT TV 32PFL9632D User Manual
Philips Docking Entertainment System DC220 User Manual
Palm Pre P100EWW User Manual
Nokia 6160i User Manual