6
CLOCK RADIO
KH 2189
Clock Radio
Operating instructions
KOMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM
ID-Nr.: KH2189-07/09-V2
INDEX
PAGE
Intended use
2
2
2
2
4
4
4
5
5
5
5
6
6
6
6
7
7
Technical data
Delivery Contents
Safety instructions
Operating elements
Commissioning
Inserting the batteries
Setting the clock
Radio Reception
Setting the alarm time
Switching the alarm function on
Switching the alarm function off
Sleep Timer
Cleaning and Care
Disposal
Importer
Warranty & Service
Read these operating instructions carefully before using this device for the first time and preserve this
manual for later reference. Pass this manual on to whoever might acquire the device at a future date.
- 1 -
CLOCK RADIO
KH 2189
Alarm functions :
Operating temperature
range:
Radio, alarm signal
+5° - +35°C
5 — 90%
Humidity:
(no condensation)
15,2 x 7,2 x 8,5 cm
ca. 415 g
Intended use
Dimensions:
Weight :.
The intended uses for this device are the reception
of FM / AM radio transmissions and as a wakeup
alarm, using signal tones or the radio itself.
This device is intended for use only in domestic settings.
It is not suitable for use in commercial or industrial
applications.
Delivery Contents
Radio Alarm
Operating Instructions
Technical data
Safety instructions
This device complies with the fundamental require-
ments and other relevant stipulations of the EMC
Directive 2004/108/EC, as well as the Guidelines
of the Low Voltage Directive 2006/95/EC.
• This device is not intended for use by individuals
(including children) with restricted physical, physio-
logical or intellectual abilities or deficiences in
experience and/or knowledge unless they are
supervised by a person responsible for their safety
or receive from this person instruction in how the
device is to be used.
• Children should be supervised to ensure that
they do not play with the device.
• Keep batteries away from children. Children can
put batteries into their mouths and swallow them.
If a battery is swallowed medical assistance must
be sought IMMEDIATELY.
Mains voltage:
Back-up power :
220 - 240 V / 50 Hz
~
9 V Block battery
Type 6LR61/6F22
(Not supplied)
5 W
Power consumption:
Power consumption
Standby:
max. 3 W
II /
Protection class:
Radio frequency range:
FM (VHF) :
AM (MW) :
87,5 – 108 MHz
526,5 – 1606,5 kHz
To avoid potentially fatal electric
shocks:
• Connect the device only to correctly installed
and earthed mains sockets. Ensure that the rating
of the local power supply tallies completely with
the details given on the rating plate of the device.
• Make sure that the power cable never becomes
wet or damp during operation. Lay the cable such
that it cannot be trapped or otherwise damaged.
The technical capabilities of this device make possible
an adjustable frequency range that lies beyond the
permitted frequency ranges of 87,5 – 108 MHz and
526,5 – 1606,5 kHz. In some countries, different
national regulations may apply in regard to the assig-
ned radio frequency ranges. Note that information
received from transmissions outside the assigned
radio frequency ranges may not be exploited, passed
on to third parties or otherwise improperly misused.
- 2 -
• Arrange for defective power plugs and/or cables
to be replaced at once by qualified technicians
or our Customer Service Department.
Interaction with batteries:
For safe interaction with batteries please observe
the following safety instructions:
• Arrange for Customer Services to repair or replace
connecting cables and/or devices that are not
functioning properly or have been damaged.
• Only use the device in dry rooms.
• NEVER submerse the device in water. Wipe it
only with a slightly damp cloth.
• Ensure that liquids and miscellaneous objects are
never able to penetrate into the device.
• Do not place water-filled receptacles (e.g. flower
vases) on the device.
• Position the device close to an electrical power
socket. Ensure that the power socket is at all times
easily accessible
• To avoid the risks of tripping, do not use an extension
cable. In the event of danger, the plug must be
quickly and easily accessible.
• Do not open the housing or attempt to repair the
device yourself. Should you do so, device safety
can no longer be assured and the warranty will
become void. Repairs are to be carried out
exclusively by a specialist firm or the service centre.
• Do NOT throw the battery into a fire.
• Do NOT short-circuit the battery.
• Do NOT attempt to recharge the battery.
• Regularly check the condition of the battery.
Leaked battery acid can cause permanent
damage to the appliance. Exercise especial care
when dealing with a damaged or leaking battery.
Risk of acid burns! Wear a pair of protective
gloves.
• Store batteries where they are not accessible to
children. In the event of a battery being swallo-
wed, seek medical assistance IMMEDIATELY.
• If you do not intend to use the appliance for an
extended period, remove the battery.
To avoid the risks of fire or injury:
• Do not place candles or other open fire sources
on the device.
• Do not use the device in the vicinity of hot
surfaces.
• Do not place the device at locations exposed to
direct sunlight. If you do, it may overheat and
become irreparably damaged.
• To prevent heat build up, place the device at
a location with adequate ventilation.
• Never cover the ventilation openings!
• Avoid any additional heat build up, e.g. direct
sunlight, heaters, other devices, etc.
Notice regarding separation from
mains-power
The slide switch AUTO/OFF/ON for this device does
NOT completely separate it from the mains power
source. Additionally, the device consumes power
when in standby-mode. To completely separate
the device from mains-power, the power plug
MUST be removed from the wall socket.
• Keep children away from the connecting cable
and the device. Children frequently underestimate
the dangers of electrical devices.
• Provide for a safe location for the device.
• Do not operate the device if it has sustained a
fall or is damaged. Arrange for the device to
be checked and/or repaired by qualified
technicians.
- 3 -
Commissioning
Thunderstorm warning!
Before a storm and/or a thunderstorm with
a risk of lightning, please separate the device from
the electrical power source!
Setup
• Unpack the radio alarm and all ancillaries.
•
Remove all transport restraints and adhesive
tape/films.
Note:
Check the condition of the battery for power-
failure protection annually, and replace it if
necessary.
Attention!
Do not permit small children to play with the
plastic packaging. There is a risk of suffocation!
Note:
• Position the radio alarm on a level and horizontal
surface.
This device is equipped with non-slip rubber feet.
As furniture surfaces may be made of a variety of
materials and are treated with many different
types of cleaning agents, it cannot be completely
ruled out that some substances contain ingre-
dients which may corrode the rubber rests and
soften them.
Inserting the batteries
Power-cut protection
If possible place an anti-slip material under the
feet of the device.
Through the insertion of a 9 V block battery (Type
6LR61/6F22) you will avoid that, in the event of a
power failure, the functioning of the device is inter-
rupted and, as a result, saved settings, such as time
and alarm time, are lost. The battery ensures that
the radio alarm continues to function with an emer-
gency operation, also during a power failure.
On restoration of the power supply, the correct
Operating elements
Power cable
Battery compartment (on the underside)
Cable aerial
TIME button
HOUR button
MIN. button
SNOOZE button
SLEEP button
AL. ON button
q
w
e
r
t
y
u
i
o
a
s
d
f
g
h
j
time will appear automatically on the display
.
s
Note:
The alarm, radio and display do not function
with battery-power.
AL. OFF button
Display
• Open the battery compartment
and insert a
w
9 V block battery (Type 6LR61/6F22).
Frequency scale
Waveband selector switch FM/AM
TUNING-Regulator
Slider switch AUTO/OFF/ON
Volume regulator
Note:
Rechargable batteries cannot be charged via
the battery connection. In the event of an extended
power cut (several hours), the clock and alarm
times must be checked and possibly re-adjusted.
- 4 -
Assembly
Note:
Before operating the device, make sure that it is in
a faultless condition. If it is not, it may not be used.
• Insert the plug into a power socket. Select a
power socket that is at all times easily accessible,
so that the plug can be quickly withdrawn in the
event of a malfunction.
To improve reception in the FM frequency range,
slowly move and hold the end of the wire aerial
e
in various directions. When you have found the
best reception for the desired transmitter, fix the
wire aerial into this position e.g. with adhesive
tape. For the reception of AM transmitters, an aerial
is built into the device. For improved reception,
alter the position of the device in radio mode.
Setting the clock
Setting the alarm time
When you take the device into use for the first
time after inserting a new battery:
When the correct time has been programmed in as
described above, proceed as follows:
Whilst pressing and holding the button TIME
:
r
• Repeatedly press, or press and hold, the button
Whilst holding the button AL. ON pressed down:
o
HOUR to set the hours.
• Repeatedly press, or press and hold, the button
t
• Release the HOUR button as soon as the required
HOUR to set the hours.
t
t
hour indicator is shown in the display
.
• Release the HOUR button as soon as the required
s
t
• Repeatedly press, or press and hold, the button
hour indicator is shown in the display
.
s
MIN. to set the minutes.
• Repeatedly press, or press and hold, the button
y
• Release the MIN. button as soon as the requi-
MIN. to set the minutes.
y
y
red minute indicator is shown in the display
.
• Release the MIN. button as soon as the requi-
s
y
The programmed time setting is automatically accepted
red minute indicator is shown in the display
.
s
as soon as the button TIME is released.
The programmed alarm setting is automatically
r
accepted as soon as the button AL. ON is
o
released.
Radio Reception
Switching the alarm function on
• Place the slider switch at the position ON.
h
• Turn the volume regulator to a midway position.
j
• Select the radio frequency range by using the
If the clock and alarm time are set correctly, as
described above:
waveband selector FM/AM
.
f
• Now select the desired radio station by turning
• Place the slider switch in the position AUTO.
h
the TUNING regulator
.
The alarm is now switched on. Serving as a check,
g
a dot appears in the left of the display
.
s
You will be woken by the radio if ...
• the volume regulator
is placed at a sound
j
level at which you will be woken.
You will be woken by the alarm tone if...
the volume regulator
is engaged at the
•
j
position OFF/BUZZ.
- 5 -
Switching the alarm function off Cleaning and Care
• Press the button SNOOZE and the alarm call will
u
be repeated after 9 minutes.
Attention! Risk of electric shock!
Before cleaning the device:
• Place the slider switch
at the position OFF to
h
switch the alarm function off completely.
• Disconnect the power plug from the power socket.
• NEVER open the housing of the device.
There are no user-serviceable elements inside.
• Clean the device only with a lightly moistened
cloth.
• Place the slider switch back into the position
h
AUTO to activate the alarm function for the next day.
• Press the button AL. OFF to switch the alarm
a
call off for 24 hours.
• Do not use detergents or solvents. They can
damage the plastic surfaces.
Sleep Timer
Disposal
• Should you wish to fall asleep listening to music,
place the slider switch at the position OFF.
h
• Should you, in addition to the pre-programmed
time, wish to be woken by music, then select the
adjustment AUTO.
Do not dispose of the device in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
• Press the button SLEEP . The radio will now play
i
for 59 minutes.
You can extend the time to switch off by...
• pressing and holding the button SLEEP and, at
Dispose of the device through an approved disposal
centre or at your community waste facility.
Observe the currently applicable regulations. In case
of doubt, please contact your waste disposal centre.
i
the same time, raise the switch off time to 1 hour
and 59 minutes with the button HOUR
.
t
You can reduce the time to switch off by ...
Disposal of batteries/accumulators
• pressing and holding the button SLEEP and, at
Batteries/cells may not be disposed of with domes-
tic waste. Every consumer is statutorily required to
return discharged batteries/cells to a collection
point in their community/district or to a dealer.
The purpose of this obligation is to ensure that batteries
are disposed of in a non-polluting manner. Only dispose
of batteries when they are fully discharged.
i
the same time, adjust the remaining time with the
button MIN.
.
y
• By pressing the button SNOOZE the sleep timer
u
is deactivated.
• By pressing the button SLEEP once again, the
i
switch off time reverts to 59 minutes.
Dispose of all packaging materials in an
environmentally responsible manner.
- 6 -
Importer
Warranty & Service
KOMPERNASS GMBH
BURGSTRASSE 21
44867 BOCHUM, GERMANY
The warranty for this appliance is for 3 years from the
date of purchase. The appliance has been manufac-
tured with care and meticulously examined before
delivery. Please retain your receipt as proof of pur-
chase. In the case of a warranty claim, please make
contact by telephone with our service department.
Only in this way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, not for wearing parts or for da-
mage to fragile components. This product is for priva-
te use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch.
Your statutory rights are not restricted in any way by
this warranty.
DES Ltd
Tel.: 0870/787-6177
Fax: 0870/787-6168
e-mail: [email protected]
Kompernass Service Ireland
Tel: 1850 930 412 (0,082 EUR/Min.)
Standard call rates apply. Mobile operators may vary.
e-mail: [email protected]
- 7 -
|