s
s
issued by
BenQ Mobile GmbH & Co.OHG
Haidenauplatz 1
D-81667 Munich
BenQ Mobile GmbH & Co.OHG
All rights reserved. Subject to availability.
Rights of modification reserved.
Manufactured by BenQ Mobile GmbH & Co.OHG
under trademark license of Siemens AG
www.siemens.com/sxg75
Designed for life
SXG75
Table of Contents
1
battery ................................... 10
Switch phone on/off,
Emergency number (SOS) ...... 15
Tone sequences (DTMF) ......... 36
Contacts list ............................. 37
Voice-activated dialling .......... 44
Starting/viewing/
History ...................................87
Browser settings .....................87
Games .......................................93
ndex
of
ndex
of
See also index at the end of this User Guide
2
Security ............................... 130
Network .............................. 132
Accessories .......................... 134
See also index at the end of this User Guide
Safety precautions
3
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content to your children and the hazards associated with using the phone.
Remember to comply with le-
gal requirements and local re-
strictions when using the
phone. For example, in aero-
planes, petrol stations, hospi-
tals or while driving.
Do not look at the LED (e.g.
activated infrared port, flash
LED) with optical magnifiers
because of radiation.
This product complies with
IEC/EN 60825-1 “Safety of La-
ser Products” for LED Class
1M products; such products
are safe under reasonably
foreseeable operating
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids
or pacemakers. Keep at least
20 cm between phone and
pacemaker. When using the
mobile phone hold it to the ear
which is further away from the
pacemaker. For more informa-
tion consult your doctor.
conditions.
Small parts such as the SIM
card, sealing stop, lens ring
and lens cap as well as the
RS MultiMediaCard can be
dismantled and swallowed by
small children. The phone
must therefore be stored out of
the reach of small children.
The ringtones (page 112), info
tones (page 124) and hands-
free talking are reproduced
through the loudspeaker. Do
not hold the phone to your ear
when it rings or when you
have switched on the hands-
free function (page 32). Other-
wise you risk serious
The mains voltage specified
on the power supply unit (V)
must not be exceeded. Other-
wise the charging device may
be destroyed.
The power supply must be
plugged into an easily accessi-
ble AC mains power socket
when charging the battery.
The only way to turn off the
charging device after charging
the battery is to unplug it.
permanent damage to your
hearing.
Only use original Siemens bat-
teries (100% mercury-free)
and charging devices. Other-
wise you risk serious damage
to health and property. The
battery could explode, for
instance.
4
Safety precautions
Do not open the phone. Only
replacing the battery, SIM card
and RS MultiMediaCard is
permissible. You must not
open the battery under any cir-
cumstances. Any other chang-
es to this device are strictly
prohibited and will invalidate
the operating licence.
The phone may cause interfer-
ence in the vicinity of TV sets,
radios and PCs.
Do not place the phone near to
electromagnetic data carriers
such as credit cards and flop-
py disks. Information stored on
them could be lost.
All electrical and electronic
products should be disposed
of separately from the munici-
pal waste stream via designat-
ed collection facilities
appointed by the government
or the local authorities.
Use only Siemens original ac-
cessories. This will avoid po-
tential risks to health or
property and ensure compli-
ance with all relevant
regulations.
Improper use will invalidate the guarantee!
These safety instructions also apply to
Siemens original accessories.
This crossed-out wheeled bin
symbol on the product means
the product is covered by the
European Directive
2002/96/EC.
The correct disposal and sep-
arate collection of your old ap-
pliance will help prevent
potential negative conse-
quences for the environment
and human health. It is a pre-
condition for reuse and recy-
cling of used electrical and
electronic equipment.
For more detailed information
about disposal of your old ap-
pliance, please contact your
city office, waste disposal
service or the shop where you
purchased the product.
Safety precautions
5
®
• The name of your phone is transmitted in
a Bluetooth connection. The factory de-
fault is the "Bluetooth ID". The first time
Bluetooth is activated, or later in the
Bluetooth menu, you can change this
name (My BT name, page 117).
• If Bluetooth is not needed, this function
should be deactivated.
Before using Bluetooth accessories, or a
Bluetooth
Your phone has a Bluetooth interface. This
makes it possible to establish a wireless
connection of your phone with a headset of
a car kit, or with other Bluetooth-enabled
devices.
In order to establish a secure link between
the devices and to prevent a third party from
having access to your phone, you should ob-
serve the following points:
mobile phone inside a vehicle, check the ve-
hicle user guide for any limitations on the use
of these products.
• The initial connection between two devic-
es, what is called "pairing", should take
place in familiar surroundings.
• Both devices must be able to identify
themselves one time by using a pass-
word/PIN. To ensure sufficient security,
you should choose a 16-digit number com-
bination for a password that would be diffi-
cult to guess (if a PIN has not been
assigned).
• An automatic connection acceptance
("connection without confirmation") should
only be used in exceptional cases.
• In general, only trustworthy devices should
be linked in order to minimize security
risks.
• You should restrict the "visibility" of your
phone if possible. This will make it much
do this, in the Bluetooth menu, set the op-
tion Visib.to others of Always visible to
Not visible (page 118).
6
Phone overview
Phone overview
Video call key
Navigation key
1 j
8
9
Press the video call key. The phone is in
video call mode.
Press the navigation key to
open the main menu or start an
application/function (page 19).
C
WAP key
Open the browser if not predefined.
k
2
3
In standby mode:
Call key
A
Press briefly: Open the user
G
Dial the number/name displayed/high-
lighted, take calls.
profiles.
Press and hold: Start the voice
dialling.
BOn/Off/End key
4
• Switched off: Press and hold to
switch on.
HE Open the Contacts.
Open the Calendar.
• During a conversation or in an
application: press briefly to finish.
• In menus: Press and hold to go back
to standby mode.
Start the FM radio.
In lists, messages and menus:
D
Scroll up and down.
I
• In standby mode: Press and hold to
switch off.
Press briefly: Power down menu.
Softkeys
5
The current functions of these keys are
shown in the bottom line of the display
as §Text§/symbol .
Z
W
01.05.2005
10:10
Task key
Press briefly: open task switcher.
Press and hold: open main menu.
6
7
i
Service provider
Clear key
l
ƒ
Inbox
Mob.Navi
Text input: Clear characters one by one
in text input mode. Press and hold to
delete text quickly.
Lists/Input fields: Delete highlighted
item(s).
Phone overview
7
Earpiece
1
2
Integrated antenna
Do not obstruct the phone above the
battery cover unnecessarily. This
reduces the signal quality.
Z
W
01.05.2005
10:10
Camera lens
3
4
Camera key
;
Service provider
: Media player key
5
Start the Media player.
Volume control
+/ -
6
7
8
9
ƒ
Inbox
Mob.Navi
Display
RS MultiMediaCard tray
Infrared interface (IrDA)
Ringtone
: *
• Press and hold in standby mode:
Switch all audible signals on/off
(except alarm). Vibration is
activated automatically.
• Press and hold on incoming call:
Switch off ringtone for this call only.
Key lock
! #
Press and hold in standby mode to
switch key lock on/off. Only emergency
numbers can be dialled.
While dialling: Enter wildcard "?".
Connection socket
For charger, headset, flash, etc.
Connection for external antenna
"
§
$
%
Camera lens
Loudspeaker
8
Display symbols
Display symbols
Display symbols (selection)
Å
¯
®
¨
©
ª
Auto answer feature on
IrDA activated
Z
Y
W
L
P
Signal strength
Charging
IrDA transmission
Battery charge level, e.g. 50%
Contacts
Bluetooth activated
Bluetooth visible for others
Bluetooth during data transfer
Call accepted at Bluetooth device
Inst. Message login
Call records
Internet
O
¬
œ
~
R
M
Q
Camera
Messages
Mobile Navigation
Organiser
Events (selection)
§
Games
ã
}
å
Æ
Á
SMS memory full
Media player
Video telephony
Extras
Missed calls
¦
¥
S
N
T
Ç
¿
¹
Ä
Phone memory full
No network access
Inbox
My stuff (file management)
Settings
Ê
Ä
Memory assistant
All calls are diverted
Ringtone off
Alarm set
Data liable to pay costs
(DRM, (page 18))
Keypad locked
Display symbols
Camera symbols
9
Message symbols (selection)
Unread
Read
Ù
Ú
Û
Brightness
p
q
r
s
t
w
x
Zoom factor
White balance
Flash connected
Draft
Sent
×
MMS not sent
MMS received
MMS read
MMS with DRM contents
(page 18)
y
E-mail forwarded
z
{
À
E-mail with attatchment
Voice mail received
10
Getting started
Getting started
Your phone's display is supplied with
a protective film. Remove this film
slowly before using the phone.
• Push the cover towards the front
in the direction indicated by the
arrow 1.
In rare cases, static discharge may
cause discolouration at the edges of
the display. However, this will disap-
pear within approx. 10 minutes.
2
Inserting the SIM card/
battery
The service provider supplies you
with a SIM card on which all the im-
portant data for your line is stored. If
the SIM card has been delivered in
credit-card size, snap the smaller
segment out and remove any rough
edges.
• Place the SIM card in front of the
slot with the contact surface fac-
ing downwards. Then press the SIM
card slightly to push it in 2 (en-
sure that the chamfered corner is
in the correct position).
Getting started
11
• Insert the battery sideways into
the phone 1, then press it
RS MultiMediaCard
The RS MultiMediaCard gives your
downwards 2 until it engages.
phone a very large memory capacity.
This allows you to save picture/video
files and sound recordings, for ex-
ample. However, you can also use
this MultiMediaCard like a floppy
disk to save any other files.
You can access the list of folders and
files in the My stuff menu (page 108).
If the MultiMediaCard assigns a file
to a function in the phone such as a
ringtone, the file is copied to the
phone memory.
• To remove, press the retaining tab
on the side of the battery, then lift
the battery out.
Additional information
RS MultiMediaCard™ is a trademark of
the MultiMediaCard Association.
New RS MultiMediaCard
• Create a backup copy of the data on the
old MultiMediaCard on a PC.
• Format the new MultiMediaCard.
• Copy the data from the PC onto the new
MultiMediaCard.
• Place the cover in position, then
push it towards the front in the di-
rection indicated by the arrow,
until it clicks into place.
Inserting/removing the
RS MultiMediaCard
Additional information
Please switch off your phone before
removing the battery!
Please observe the manufacturer's
operating instructions that come
with the RS MultiMediaCard.
Attention
Before removing the RS MultiMediaCard,
carry out the Eject card function in the set-
tings menu (page 125). This prevents any
possible data loss.
12
Getting started
• Press on the tray. The tray for the
card is opened. You can remove
the tray.
• Insert the card on the tray (ensure
that the chamfered corner is in the
correct position 1). Insert the tray
with the card into the phone 2
until it snaps in.
Display during charging.
Y
Charging time
An empty battery is fully charged af-
ter about 2 hours. Charging is only
possible within a temperature range
of +5 °C to 45 °C. If the temperature
rises/falls 5 °C above/below this, the
charge symbol flashes a warning.
The mains voltage specified on the
power supply unit must not be ex-
ceeded.
Charging the battery
The battery is not fully charged
when delivered. Plug the charger
cable into the bottom of the phone,
plug the power supply unit into a
mains power socket and charge for
at least two hours.
The charge level of the battery is
only displayed correctly after an un-
interrupted charging/discharging
cycle. You should therfore not remove
the battery unnecessarily and where
possible not end the charging process
prematurely.
Only use the plug-in power supply
included in delivery!
As an alternative, the battery can
be charged via the USB port
(Accessories, page 135).
Additional information
The power supply unit heats up when used
for long periods. This is normal and not
dangerous.
If the battery is removed for longer than
30 seconds, the clock must be reset.
Getting started
13
Operating time
Display while in service
The operating time depends on the
operating conditions. Extreme tem-
peratures considerably reduce the
phone’s standby time. Avoid placing
the phone in the sun or on a heater.
Charge level display during opera-
tion (empty–full):
VWX
Battery low warning
When the battery is almost empty
you are warned twice. The first
warning appears when the battery
Talktime:
• UMTS: up to 300 minutes
• GSM: up to 360 minutes
Standby time: Up to 400 hours
has 10 minutes of power remaining.
The second warning appears when
the battery has 1 minute of power
remaining.
Additional information
ples of functions that reduce the standby
time, e.g. animated screensaver, fast
search, see page 138.
§OK§
Press to confirm warning.
Power off
If battery is completely empty, the
phone switches off automatically.
Charge icon not visible
Additional information
If the battery has been discharged
fully, the charge icon is not immedi-
ately visible when the power supply
is plugged in. It will appear after up
to two hours. In this case the battery
is fully charged after 3 to 4 hours.
If phone powered down because of low
battery, it will power on again automatically
when charged.
14
Switch phone on/off, enter PIN
Switch phone on/off, enter PIN
Entering the PIN
The SIM card can be protected with
a 4 to 8-digit PIN.
Switching the
phone on/off
Switching the phone on
Enter PIN using number
J
keys. Asterisks appear to
ensure nobody can read
your PIN on the display.
Correct with l.
key to switch phone on.
B
Enter PIN or confirm request
(page 25).
§OK§
Confirm. Logging on to
the network will take a
few seconds.
Your greeting message and the start-
up animation are displayed if activat-
ed (page 114). Press any key to end
the animation.
Additional information
Change PIN..................................page 24
Clear SIM card barring .................page 25
The phone switches on
automatically when:
• You charge the phone via USB or
• an alert or calendar event appears.
If you do not respond, the phone
switches off again. If you respond
to the alert, the PIN is required.
§Yes§
Or
Press to activate.
§Offline§
Press to start in offline
mode (page 18).
Switch phone on/off, enter PIN
15
Switching the phone off
Emergency number
(SOS)
Press and hold
On/Off/End key.
B
Only to be used in real emergencies!
Or
By pressing the softkey §SOS§ you can
make an emergency call on any net-
work without a SIM card and without
entering a PIN (not available in all
countries).
Press briefly and select one
of the following options.
B
Switch off
Switch phone off. Phone
switches on automatically
if alarm or calendar event
occurs.
Additional information
If key lock is active (page 7) only emergen-
cy numbers can be dialled: Enter number
and press §SOS§.
Offline mode
Phone is not switched off,
but has no connectivity
(page 18).
The shutdownanimation (page 114)
is displayed.
Additional information
The shutdown is interrupted, if:
• some files occur to be not saved or
• the phone is receiving an MMS.
A warning message is displayed. Press
§Yes§ to continue shutdown. Files are not
saved. Message is received when phone is
switched on again.
16
Switch phone on/off, enter PIN
Time zones
Switching on your phone
for the first time
Select the desired setting
and change time zone in
world map.
F
When you switch on the phone for
the first time or after the battery has
been removed, you are prompted to
set the time/date.
Select a city in the
selected time zone.
I
Select if you want to
C
time zone to save.
enter time/date.
Further options and settings on
page 128.
Time/Date
When you first switch on, set the
clock and date so that it displays the
correct time. You will not have to
make this setting again.
First enter date
J
(day/month/year), then
time (24 hours).
Press to update time
and date.
C
Additional information
You can activate Auto time mode
(page 129) to display local time by network
if the network supports this function.
General instructions
17
General instructions
Alert region
Standby mode
In the alert region above the softkeys
the following message types can be
displayed:
The phone is in standby mode and is
ready for use when the name of the
service provider appears on the dis-
play.
• New entries in missed calls list,
voice mail or inbox.
Press and hold the
B
• New content via IrDA/Bluetooth.
• Missed calendar events.
On/Off/End key to return
to standby mode from
any situation.
The number of new entries is
displayed (e.g. 1 Missed call).
The following information might be
displayed:
Logo
Signal strength
If logo or wallpaper is enabled
(page 113) logo is displayed.
[
Strong signal.
A weak signal reduces the
call quality and may lead
to loss of the connection.
Change your location.
CB messages
If CB display is enabled (page 74) a
CB ticker with the latest CB message
is displayed, scrolling horizontally if
needed. The CB ticker is only availa-
ble if the alert region is not used, i.e.
there are no current events.
If phone cannot obtain network serv-
ice after 15 minutes the power save
mode is used. The phone only
attempts to acquire service in
intervals.
18
General instructions
Offline mode
User guide
In offline mode you can operate
many phone functions but you are
not connected to any network (you
are not available for incoming calls
and you cannot initiate a call).
Symbols
The following symbols are used to
explain operation:
Enter numbers or letters.
J
B
A
§Options§
This is the mode to be used in
aircrafts.
On/Off/End key
Switching between offline and
online mode:
Call key
Press briefly and select
Offline mode/Online mode.
Displays a softkey
function.
B
Confirm request.
C
Press the navigation key
down, to call up the menu
for example.
C
Digital Rights Mgmt.
(DRM)
Display navigation func-
tion. Press navigation key
in the direction indicated.
DFE
HIG
Remember that your phone has dig-
ital rights management. The use of
downloaded pictures, sounds or ap-
plications can be restricted by the
suppliers, e.g. copy protection, use
for a limited period of time only,
number of times they can be used,
etc.
Function dependent on
service provider, may re-
quire special registration.
=
General instructions
19
Main menu
Navigation key
The symbol in the centre of the low-
er line of the display shows the cur-
rent function when the navigation
key is pressed down vertically.
The main menu is displayed graphi-
cally with symbols:
Call up from standby
C
mode.
In this User Guide the symbol Cis
used universally when the naviga-
tion key is pressed down vertically.
The following functions are available
(selection):
Select application
symbols.
/
F I
Start application.
C
Tabs
ƒ
‚
‡
Display main menu
Confirm/select
Tabs allow fast access to information
and applications.
Change
(open options list)
2
1
3
3
†
—
Call, accept call
Edit
1
2
”
˜
ô
Camera
Send
View
–
Save
Switch between tabs.
F
ˆ
‰
‹
Š
“
ö
|
÷
Play
While editing a tab, you navigate
within the input field.
Pause
Stop
Leave input field, to
switch to the next tab.
I
Record
Zoom
Insert calendar
Insert picture
Insert contact
20
General instructions
Menu control
The steps needed to reach a function
are shown in a condensed form in the
user guide, e. g. to set ringtones
Standard functions
Options menu
The list contains functions that are
offered in several options menus.
C ¢ T¢ Ringtones
§Options§ Open menu.
This comprises the following steps:
<New entry>
Save
Create new entry.
Store entry.
Open main menu.
C
F I
/
Select Tto open Settings
Change
Open options list. Select
option and confirm.
menu.
Confirm selection.
C
I
C
View
Info
Display entry.
Select Ringtones function.
Confirm selection.
Display properties of
selected entry.
Details
Display additional informa-
tion about message (eg.
date, sender, save loca-
tion, attached files, size)
Delete/
Delete all
Delete entry/delete all
entries after confirmation.
Exit
Exit application.Confirm
request with Cif you want
to save changes.
Edit
input field to edit.
Text input
meth.
(page 26).
Text edit
menu
Open text edit menu
(page 27).
Sort by
Select sort criterion (e.g.
alphabetical, type, status,
sender, date/time).
General instructions
21
Fast list search
Set as
e.g. set picture as wallpa-
per, logo, screensaver,
melodies as ringtones.
Pressing number keys while you are
in alphabetically ordered lists (e.g.
Contacts, My Stuff) opens a fast
search window.
Rename
Send
Rename selected entry.
Select transmission type
(e.g. MMS, SMS, Instant
Message, e-mail, IrDA or
select Search/Known
devices/Last connected
(page 117). If a DRM
protected file is selected,
the send option is not
available.
Enter text to jump quickly
J
to the entry that corre-
sponds most closely
with the entered text.
Memory assistant
The memory assistant is launched
automatically if memory is low.
Start via main menu:
Create
Select transmission type
(see above) and create
message. If contact/call list
entry is selected, it is used
for receiver data.
C ¢ T¢ Phone ¢ File system
message
All saved folders and files in phone
memory and on RS MultiMediaCard
(page 11) are listed. Display name
and size of folders/files.
Reply/
The sender becomes the
Reply to all recipient, "Re." is placed in
front of the subject matter
and the received text is
transferred into the new
message.
If RS MultiMediaCard is inserted,
folders/files are organised on a
separate tab.
Select tab
F
Capacity/
Memory
status
Display memory status for
respective application,
phone, SIM card or the
RS MultiMediaCard.
If memory is insufficient to
save required data, a notifi-
cation is displayed.
Confirm with Cto open
Memory assistant (see
below).
(phone memory/
RS Multi-MediaCard).
Select folder/file.
I
§Options§ Open menu and select
function (standard
functions page 20).
To free up required memory open
file before deleting or delete files
directly.
22
General instructions
Mark mode
Menu speed dialling
Within some applications (e.g. Con-
tacts/My Stuff) one or more entries
in a list can be highlighted to carry
out a function jointly.
All menu functions are numbered in-
ternally. A function may be selected
directly by entering these numbers
in sequence.
§Options§
E.g., write new SMS (from standby
mode):
Open menu and select
Mark
.
Select entry/entries.
Mark/unmark entry.
Press this key to display
I
C
C
the main menu.
Press this key for
Messages.
5
Mark options
Depending on the current situation,
different functions will be offered.
Press this key to create
new message.
1
§Options§ Open menu.
1
Press this key for SMS.
Mark/
Unmark
Mark/unmark selected
entry.
Mark all
Mark all entries.
Unmark all
Unmark all marked entries.
Delete all marked entries.
Delete
marked
Send
marked
Send marked messages
(e.g. e-mails from draft
folder).
Retrieve
marked
Retrieve marked e-mails
(if only header is retrieved).
Remove
marked
Remove selected
contact(s) e.g. from a
distribution list or group.
General instructions
Task switching options
23
Task switching
If any applications are currently
open, an options menu is offered.
The phone supports the use of multi-
ple applications at the same time.
The function you are currently using
is in foreground, the other open ap-
plications are in the background.
§Options§ Open menu.
Switch to
Close
Move highlighted
You can switch from the current ap-
plication to the main menu, standby
mode or to any open application.
application to foreground.
Close highlighted
application.
Press the Task key. All
currently open applica-
tions are listed.
i
Close all
Close all open applications
except main menu.
You can directly switch to the Main
Menu, Home or to any open
application:
Menu/Home/<Application>
Select and confirm
with C.
If you are holding a call, select
Current call to return to the call.
24
Security
C ¢ T¢ Security ¢ PIN codes
Security
¢ Select function.
The phone and SIM card are protect-
ed against misuse by several security
codes.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not
Keep these confidential numbers in
a safe place where you can access
them again if required.
permit deactivating the control.
PIN codes
On/Off
Activate/deactivate PIN
control.
PIN
Protects your SIM card
(personal identification
number).
Enter PIN code.
Confirm.
J
C
PIN2
This is needed to set the
charge detail display and to
access additional functions on
special SIM cards.
Change PIN
You can change the PIN to any
4 to 8-digit number you find
easier to remember.
PUK
PUK2
Key code. Used to unlock
SIM cards after the wrong PIN
has been entered repeatedly.
Enter current PIN code
J
and confirm with C.
Phone
code
Protects your phone. Must be
entered at the first security
setting.
Enter new PIN code and
J
confirm with C.
Re-enter new PIN code and
J
C
confirm with C.
Confirm.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Security
25
Change phonecde
You define the phone code
(4-8 digits) when you call up a
phone-code protected function for
the first time. It is then valid for all
phone-code protected functions.
Preventing accidental
Even if PIN use is deactivated
(page 14) confirmation is required
to switch on the phone.
This prevents accidental activation
of the phone, e.g. when you are
carrying it in a bag or when you are
travelling in an aircraft.
To change phone code proceed as
with Change PIN.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is de-
nied. Contact the Siemens Service
Centre (page 142).
Press and hold.
B
§OK§
Press. The phone
switches on.
§Cancel§
Press or take no action.
The phone does not
switch on.
Clearing SIM card barring
If the PIN is entered incorrectly three
times, the SIM card is barred.
Enter new PIN code and
®
J
Connecting to Windows
PCs
confirm with C.
Enter new PIN code again
J
and confirm with C.
Windows® PC using IrDA, Bluetooth
or a data cable (accessories,
page 147). The Windows® PC
program MPM (Mobile Phone
Manager, page 136) enables you to
backup data on your Windows® PC
and to synchronise the contacts with
Outlook®, Lotus Notes™ and other
Siemens phones (as well as some
Gigasets). You can download the
Mobile Phone Manager from the
Internet at:
Enter PUK code (MASTER
J
PIN) provided by your
service provider with the
SIM card in accordance
with the instructions and
confirm with C.
Confirm.
C
Additional information
If the PUK (MASTER PIN) has been lost,
please contact your service provider.
26
Text entry
*
Press briefly: Special
Text entry
characters are shown.
Press and hold: Open
edit menu.
Text entry without T9
Press number key repeatedly until
the required letter appears. After a
brief interval the cursor will advance.
Example:
0
1
Press once/repeatedly:
. , ? ! ’ " 0 + - ( ) @ / : _
Press and hold: inserts 0.
Press to insert space.
Press twice to insert
line feed.
2
Press once briefly to write
the letter a, twice to write
b etc.
Press and hold to write
Special characters
the number.
*
Press briefly. The symbols
chart is displayed:
Ä, ä, 1–9 Unusual characters and
numbers are displayed af-
ter the relevant letters.
1)
¿
¡
_
’
;
.
,
/
?
!
l
Press briefly to delete the
letter left of the cursor or
marked text. Press and
hold to delete text quickly.
+
¤
[
-
"
$
{
`
:
*
(
&
)
¥
]
£
}
€
%
Γ
@ \
#
>
Ξ
~
<
=
Move the cursor
(forwards/back).
F
|
^
Σ
§
∆
Θ Λ
Π
Φ Ψ Ω
#
Press briefly: Swap
between: abc, Abc, ABC,
T9 abc, T9 Abc, T9 ABC, 123.
1
) Line feed
,
Navigate to characters.
Confirm.
I F
Press and hold: Input
method menu is
displayed.
C
The sequence of the input
methods is language-
dependent.
Text entry
27
Marking text
You can highlight text in order to
copy and paste it to a different place.
Text edit menu
For text entry:
*
Press and hold: The edit
menu is displayed:
*
Press and hold. The edit
menu is displayed.
Insert symbol
Spell word
Mark text
Mark text Activate highlighting
mode.
Copy/Paste
Scroll to highlight text.
F
Input language
Copy
Copy highlighted text to
the clipboard.
Selecting the input language
Select the language in which you
want to compose your message.
Paste
Paste the copied text into
the desired location.
§Options§ Open edit menu.
Text entry withT9
Input language
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive
dictionary.
Select.
Select language. If you se-
I
language is based on the
Display language
Activating, deactivating T9
(page 124).
#
Press and hold: Input
method menu is
displayed.
Confirm, the new lan-
guage is set.
C
Languages with T9 support are
marked with the T9 symbol. The
input language setting applies to
all applications.
Select desired input mode.
§Select§ Activate/deactivate T9.
28
Text entry
Writing with T9
T9-word suggestions
The display changes as you proceed.
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first. If the word you want
has not been recognised, the next
suggestion from T9 may be correct.
It is best if you finish a word without
looking at the display.
Simply press the keys once where the
relevant letter is located. For "hotel",
for example:
The word must be shown
§highlighted§. Then press
#
Press briefly for T9 Abc
then
§<< T9 <<§ The displayed word is
replaced with a different
word. If this word is also
incorrect, press again
46835
1
A blank ends a word.
Do not use special characters such as
Ä. Use standard characters instead,
e.g. A; T9 will do the rest for you.
§<< T9 <<§ Repeat until the correct
word is displayed.
If the word you want is not in the
dictionary, it can also be written
without T9.
®
T9 Text Input is licensed under one or more of
the following: U.S. Pat. Nos. 5,187,480,
5,818,437, 5,945,928, 5,953,541, 6,011,554,
6,286,064, 6,307,548, 6,307,549, 6,636,162 and
6,646,573; Australian Pat. Nos. 727539, 746674
and 747901; Canadian Pat. Nos. 1,331,057,
2,302,595 and 2,227,904; Japan Pat. No.
3532780, 3492981; United Kingdom Pat. No.
2238414B; Hong Kong Standard Pat. No.
HK1010924; Republic of Singapore Pat. No.
51383, 66959 and 71979; European Pat. Nos.
0 842 463 (96927260.8), 1 010 057
(98903671.0), 1 018 069 (98950708.2);
Republic of Korea Pat. Nos. KR201211B1 and
KR226206B1. People's Republic of China Pat.
Application Nos. 98802801.8, 98809472.X and
96196739.0; Mexico Pat. No. 208141; Russian
Federation Pat. No. 2206118; and additional pat-
ents are pending worldwide.
To add a word to the dictionary:
§Spell§
Select.
The last suggestion is deleted and
the word may now be entered with-
out T9 support. Press §OK§ to add it
automatically to the dictionary.
Correcting a word
Move left or right, word
F
by word, until the re-
quired word is
§highlighted§.
§<< T9 <<§ Scroll through the T9
word suggestions again.
Text entry
29
l
Deletes the character to
the left of cursor and
displays a new possible
word!
Text templates
Text templates are short excerpts of
texts that you can insert in your mes-
sages (SMS, MMS).
Additional information
Creating text templates
Within a "T9-word", individual letters may
not be edited without first removing the T9
status. In most cases it is better to rewrite
the complete word.
C ¢ M¢ Template
The list of existing templates is
displayed.
0
Set a full stop. Word is con-
cluded if it is followed by
space. Within a word, full stop
represents an apostrophe or
hyphen:
§Options§ Open menu and select
New template.
Write text.
J
e.g. §provider.s§ = provider’s.
§Options§ Open menu and select
Moving the cursor to the right
ends the word.
E
Save.
Input method
Press briefly: Switch be-
Additional information
#
If you want to create a new message from
the template menu select §Options§ New
message.
tween: abc, Abc, T9 abc, T9
Abc, 123. Status shown in top
line of display.
Press and hold: All input vari-
Inserting text templates
SMS/MMS:
ants are displayed.
Special characters
*
Write message.
J
characters (page 26).
§Options§ Open menu and select
Press and hold: Open edit
menu (page 27).
Insert text.
Template Select.
Select a text template
from the list and confirm
I
with C.
The text template is inserted in the
message to the right of the cursor.
30
Calling
Calling
With your phone you can make con-
ventional (voice) calls as well as vid-
eo calls. However, it is not possible
to make a voice call and a video call
at the same time.
Dialling with number
keys
The phone must be switched on
(standby mode).
Enter the number (always
J
Video calls
with prefix/international
dialling code).
To initiate a video call
(in standby mode):
Press the Call key.
A
Or
C ¢ ¥
Press.
The phone switches to
view is displayed. You can
enter a number (see Dial-
ling with number keys).
Press the video call key to
make a video call.
j
The displayed number is dialled.
Or
Enter the number (always
J
Ending a call
with prefix/international
Press the End key briefly.
dialling code).
B
Press this key even if the
person on the other end
of the line has hung up
first.
j
Press the video call key.
The phone switches to
video call mode.
You can also decide to make a video
call after you have already entered a
number or selected a number from a
call list.
Prerequisite
The called party as well as the network
have to be capable of handling video calls.
If you are calling a number that does not
meet these requirements you will be of-
fered the option of making a voice call
instead.
Calling
31
Additional information
Setting the volume
*
Press and hold to switch
microphone off.
+/ -
Regulate the volume (on-
ly possible during a call).
International dialling codes
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
0
Press and hold until a "+" is
displayed.
Number memo
You can enter a number during the call. The
person to whom you are speaking can hear
these entries. When the connection has
ended you can save or dial the number.
Redialling previous
numbers
To enter the Dialled calls list (in stand-
by mode):
Accepting a call
The phone must be switched on.
An incoming call is indicated by a
special screen:
Press the Call key.
A
To redial the number last called:
Press the Call key again
(not in video call mode).
A
A number and the name of the caller
transmitted by the network will be
displayed if the number is saved in
the contacts. A picture of the caller
may also be displayed (page 38).
Or
Press the video call key to
j
make a video call.
To redial other numbers that were
dialled previously:
If the incoming call is a video call a
video of the caller is displayed. How-
ever, the transmission of the video
may be suppressed by the caller.
Pick out the number from
the list.
I
Press the Call key (not in
video call mode).
A
Or
Press.
A
Or
Press the video call key
to make a video call.
Press.
C
j
Or
j
Press to accept a video call.
32
Calling
If the incoming call is a video call and
Show my image is deactivated (de-
fault, page 123) Do you want to show
your video image? is displayed. You
have the following options:
Speakerphone
Activate/deactivate
handsfree talking and
confirm with C.
Warning!
§Yes§
Your video is shown to
the caller.
Always switch off "handsfree talking" be-
fore holding the phone to your ear! Other-
wise you will damage your hearing!
§No§
The video mute picture is
shown to the caller (Select
image, page 123).
Additional information
During a video call the speakerphone is ac-
tivated by default.
Rejecting a call
§Reject§
Press.
Swapping between
Or
2 calls
b
Press briefly.
B
Warning!
(not during video calls)
Establish a second connection
You can call another number during
a call.
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Dial the new number and
J
Additional information
A
press . The current call
*
#
Â
Press and hold to switch si-
is put on hold.
lent mode on/off.
When the new connection is estab-
lished you can swap between calls:
Press and hold to switch key
lock on/off.
Missed call display.
§Options§ Open menu and
select Swap.
Or
Handsfree talking
You can put the phone aside during
a call. You can then hear the caller
via the loudspeaker.
Press.
A
§Options§ Open menu.
Calling
33
Incoming calls during a call
Conference
b
You may need to register for this
service with your service provider
and set your phone accordingly. Dur-
there is another call waiting. You will
hear a special tone during the call
(page 121). You have the following
options:
(not during video calls)
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your serv-
ice provider or may have to be
enabled specially.
Once a call has already been
established:
Accepting the waiting call in addition to
the first
§Options§ Open menu and select
Hold call. The current call
is put on hold.
§Swap§/
Accept the waiting call.
The current call is put
on hold.
A
Dial a new number. When
J
To swap between the two calls when
two connections are established,
the new connection is
established …
always press
.
A
§Options§ … open menu and select
Conference. The held call
is joined.
Rejecting the waiting call
§Reject§ Press.
Accepting the waiting call, ending the
current call
Repeat procedure until all partici-
pants are linked together (up to
5 participants).
End the current call.
B
Accept the new call.
C
Ending a conference
Ending calls
Ending all calls
Press the End key briefly.
All calls in the multiparty
B
B
conversation are ended
when the End key is
pressed.
Or
§Options§ Open menu and
select Drop.
Ending one call
After the Return to held call? display,
you have the following options:
§Options§ Open menu and select
Drop. Then select the call
to be ended.
§Yes§
§No§
You accept the held call.
You end the held call.
34
Calling
After the Return to conference call? dis-
Call options
play, you have the following options:
The following functions are only
available during a call:
§Yes§
§No§
You return to the
conference.
§Options§ Open menu.
You end all calls.
Mute call/
If switched off, the person
on the other end of the line
cannot hear you (muting).
Private call
Mute sound
You can remove a party from a con-
ference and make a private call to
that party while the conference is
put on hold.
Also: Press and hold
*.
In video calls your video is
still shown on the other
end of the line.
§Options§ Open menu and select
Private. Then select the
Speaker-
phone
entry for the private call.
Call via the loudspeaker.
You can swap between the private
call and the conference:
Upgrade to
vid/Switch to call to a video call or vice
voice
Change the current voice
§Options§ Open menu and select
versa. The current call is
ended and a new connec-
tion with the same partner
is established.
Swap.
When your private call is finished
you have the following options:
Transf
Switch the sound of the
current call to the headset
and back to the phone.
End the private call and
return to the conference.
B
access'ry/
Transfer
phone
Or
§Options§ Open menu and select
Conference. The private
call is joined to the
Add to
contacts
Select To a new contact/
To exist. contact. Select
number type to store the
number in the contacts.
Confirm save notification
with C.
conference again.
Not during video calls:
Hold call
Swap
Hold current call.
Swap between calls.
(see page 33)
Conference
Calling
35
Drop
End a call in a confer-
ence.
Adjust how many frames
per second the camera
will capture.
Private
Make private call in a
conference (see
page 34).
White
Balance
Adjust the sensitivity to
light.
Transfer
DTMF
Flicker
Connect two calls in a
conference and discon-
nect oneself.
Adjust the sensitivity to in-
door lightening flicker
rate.
Adjustment
Enter tone sequences
(numbers) for remote
inquiries to an answering
machine.
Send picture/ Select a picture/video
Send video
from My stuff and show it
to the person on the other
end of the line.
Only during video calls:
Full/split screen
Select the video presentation on
your display. You have the following
options:
Mute video
video mute picture is sent
(Select image,
page 123).
Them fullscreen
The video of the other party is shown
in full screen mode.
Pause inc./
Pause outg. (of the other party) or out-
going video (yours).
Pause the incoming video
The menu entry changes
to Resume inc./Resume
outg.
Splitscr. -- me sm.
The video of the other party is shown
in full screen mode and your video is
shown in an additional small frame.
Switch
camera
Switch between front and
rear camera.
Splitscr. -- me lg.
Full/split
screen
Select the video presen-
tation on your display (see
below).
Your video is shown in full screen
mode and the video of the other
party is shown in an additional
small frame.
Me fullscreen
Your video is shown in full screen
mode.
36
Calling
Using Contacts
Store numbers and control codes
(DTMF codes) in Contacts in the
same way as a normal entry.
Tone sequences (DTMF)
You can enter control codes (num-
bers) for remote access to an auto-
matic answering machine while an-
other connection exists. These inputs
are transmitted directly as
Enter number.
J
0
DTMFcodes (control codes).
Press until a "+" appears in
the display (wait for the
connection to be estab-
lished).
§Options§ Open menu.
DTMF
Select.
Enter digits and confirm
with C.
J
Enter DTMF codes
(numbers).
J
0
If necessary, wait again
for three seconds at a
time for the receiver to
process the entries safely.
Enter a name.
J
§Save§
Store entry.
You may also store just the DTMF
codes (numbers) and then send
them during the call.
Contacts
37
Contacts
You can store contacts with a variety
of phone and fax numbers as well as
additional address details.
Contacts
Groups
All contacts (including SIM
contacts) and distribution
lists.
following types of entries:
All groups.
SIM
contacts
Contacts saved on the SIM
card.
(page 38).
Filter
Apply different filter criteria to
all contacts.
• SIM contacts saved on the SIM
card (page 40).
• Distribution lists: short-cuts for
communication with more than
one person. Contacts may belong
to several distribution lists
(page 42).
Dialling contact
Call selected contact.
A
Or
Make (video) call.
j
Or
shared ringtone). A contact can
belong only to one group
(page 40).
Press and hold to activate
voice dialling.
G
C ¢ L
Contact selected
Or
Call the default/video enabled
number. If no default number is
stored, select which number to call.
Open Contacts.
H
For fast access, contacts are
organised on 4 tabs.
SIM contact selected
Call the number. If several numbers
are stored, select which number to
call.
Switch between tabs.
F
38
Contacts
Several numbers selected
Within the tabs:
If several contacts or a distribution
list is selected:
Select input fields.
Fill in input fields.
I
J
• The call key Aand the video call
key jhave no effect.
At least one name must be entered.
The name of each contact must be
unique. Always enter the number
with prefix.
Contacts
All contacts (excluding SIM contacts)
are displayed in alphabetical order.
Distribution lists and groups are dis-
played additionally.
Assign media files
In some input fields (ringtone, video,
picture) you can assign audio/video
ringtones and pictures.
Contacts can include 4 numbers,
4 e-mail addresses, 2 URLs, 2 fax
numbers and 2 postal addresses.
You can set one value as default for
each type (page 39).
Select media field (e.g.
picture) and confirm
with C.
I
Depending on the media type you
can either record a new media file
via camera or sound recorder or se-
lect a file from the corresponding My
stuff folder (page 108).
New entry
<New entry>
Select.
Select the number type.
I
Additional information
In many situations, you can use the Cam-
era key to open the camera application:
The possible input fields are organ-
ised on 4 tabs:
General
info
First and last name, important
numbers (private, business,
mobile phone).
;
Start camera application in
picture/video mode (depend-
ing on the selected field).
Private
E-mail address, fax number,
address and notes.
Save contact
§Options§ Open menu and select
Save. Confirm request
with C.
Business
Personal
Office information and address.
Audio/video ringtone, pic-
ture, group, birthday and
display name.
Confirm save notification.
C
Contacts
39
Number extensions in contacts
(wildcards)
Contact options
§Options§ Open menu.
Digits may be replaced by a "?" (wild-
card) when numbers are entered in
contacts:
Set as default
Setselected field as default
for that type (e.g. default
number or e-mail). Current
default is marked with *.
§Options§ Open menu and select
Insert wildcard.
Create e-mail
Switch tab...
Send e-mail to selected
contact(s).
Or
#
Press down to insert "?".
Select contact tab for
more input fields.
These wildcards must be replaced
with numbers before dialling (e.g.,
with the extension numbers in a
phone system).
Add birthday/
Remove
birthday
If no birthday is entered,
open birthday field. If birth-
day is entered, delete after
confirmation.
To make a call, select the number
from contacts.
Set date
If birthday field is selected:
Open calendar to currently
entered date.
Press.
A
J
A
Replace "?" with numbers.
Number field selected:
Insert 2-s
pause
Press. Number is dialled.
Insert pause ("P").
Insert
wildcard
below.
Record voice
tag
Start recording voice tag
(page 44).
Play voice
tag
Start playback of current
voice tag.
Delete voice
tag
Confirm to delete voice
tag.
Further options on page 42.
40
Contacts
Edit Group
Groups
§Options§ Open menu and select
Groups are collections of contacts
that can be used to categorise con-
tacts. A group can have the same in-
coming audio/video call alert. SIM
contacts cannot belong to a group,
you have to copy them to the phone
contacts first.
You can rename the group and at-
tach an audio ringtone and a picture
(page 38).
SIM contacts
Contacts saved on SIM card are man-
aged on this tab. SIM contacts con-
tain less information than contacts
saved on the phone.
The following groups have already
been created and can be renamed
but not deleted: Family, Friends,
Office, VIP.
New group
You can add personal groups.
New entry
<New entry>
<New group>
Select to create a new
entry.
Select and enter the name
of a new group.
Navigate to input fields.
I
§Done§
Press to confirm.
Fill in input fields: name
and up to 3 numbers. Pro-
tected SIM contacts pro-
vide only one number
field.
Add member
J
Select a group. The
I
number of entries is dis-
played in the second line
when highlighted.
SIM/Protected SIM
§Options§ Open menu and select
Add new member. A list of
all contacts that are not
already in the group is dis-
played.
Select storage location.
Special SIM cards can save
numbers in a protected
area (protected SIM)
(PIN2 required).
Select new members and
confirm with C.
Confirm selection.
Select available number.
I
F
§Add§
Contacts
§Options§ Open menu and select
Save and confirm request
with C.
• Video telephony: Contacts with a
video allowed number (page 42)
are listed.
Confirm save notification.
• E-mail
• URL
C
Additional information
• Birthday
If you want to save/edit/delete contacts in
the protected SIM area, the PIN2 is required.
• Stored on phone: all contacts
(except SIM contacts)
Convert SIM contact
• Distribution lists
§Options§ Open menu and select
I
Select criterion and con-
firm with C.
Add more fields.
contact. You cannot convert protect-
ed SIM contacts. Further options on
page 42.
A list is displayed with contacts that
contain the chosen feature, e.g. all
contacts including a birthday entry.
Remove contact/reset filter
Select contact(s)/list.
Filter
Depending on the selected filter, all
contact categories (contacts, SIM
contacts, distritbution lists and
groups) can be listed on the
filter tab.
§Options§ Open menu and select
Remove from list/Reset list
and confirm with C.
§Options§ Open menu and
select Filter and
confirm with C.
The following filter criteria are
available:
• Voice dialling: All contacts are list-
ed that have a voice tag associat-
ed with one or more of their
numbers.
42
Contacts
SIM contacts
Options menu
Add more
fields
Depending on the current situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries.
Convert SIM contact to reg-
ular contact (not for protect-
ed SIM contacts).
Special
numbers
=
Your provider may supply
you with special numbers.
Select classes you want to
show/hide.
§Options§ Open menu.
Distribution lists
Business card
New distr.
list
Enter name. You can re-
name the distribution list
and attach an audio/video
ringtone and a picture.
Create biz
card
Create a business card,
which is a contact contain-
ing your own contact
information.
Add to distr.
list
Add contact of distribution
list/group to a new or exist-
ing distribution list. If SIM
contact is added, confirm
request to convert into
contact.
The business card is dis-
played outside the sort or-
der at the top of the contact
list.
Set as biz
card
Confirm request. Selected
contact is set as business
card. If a business card al-
ready exists, it is converted
to a regular contact. SIM
contacts cannot be set as
business cards.
Add new
member
Open contact list. Select
contacts and add them to
the selected distribution
list.
Groups
Undo biz
card
Convert selected business
card to a regular contact.
New group
Enter name.
Add to
group
Add contact(s) to new or
existing group. If contact(s)
already belong to a group
confirm to switch to new
group. If SIM contact se-
lected, confirm to move
contact to phone memory.
Contacts
43
Media field selected
Save op-
tions
Depending on save loca-
tion, select
• copy/move to SIM: Only
SIM information is saved.
Extended version of the
contact is kept.
e.g. Play
ringtone
Start playback of current
ringtone. Same for video
and picture.
e.g.
Replace
ringtone
Select new ringtone. Same
for video and picture.
• copy/move to phone.
Protected SIM contacts,
special numbers and the
business card cannot be
copied or moved to another
save location.
e.g.
Remove
ringtone
Confirm to delete current
ringtone from contacts.
Same for video and picture.
General options
Save
location
Select SIM/Phone as
default save location.
Synchro-
nise
Initiate synchronisation
(see below).
Duplicate
Open new contact with
duplicate information.
Open web
site
If contact information con-
tains URL, start the brows-
er and load URL.
Find
Open menu (page 44).
Send
contact
Send contact as vCard
(see below).
For standard functions see page 20.
Synchronise
Initiate synchronisation of contacts
(page 97).
Set as vid.
allow'd/
Only one number of the
contact can be set as video
allowed. Option is set auto-
matically if you get/initiate a
video call from/to that
number. Note that this op-
tion is not available for SIM
contacts.
Undo
vid.allow'd
Additional information
With the Siemens MPM (Mobile Phone
Manager, page 136) you can hold your ad-
dresses in a Windows® PC and synchro-
nise with the contacts.
44
Contacts
Filter contacts
Send contact
Select filter criterion
If you want to send/receive complete
contacts, the contact is transmitted
as a vCard.
I
(page 41) and confirm
with C.
You can send your own/other con-
tacts via Bluetooth, IrDA, SMS, MMS
or e-mail.
Voice-activated dialling
You can dial numbers from the con-
tacts by speaking the name. SIM con-
tacts, distribution lists and groups
cannot have a voice tag.
Receiving vCard
You can receive contacts included in
a message or via IrDA/Bluetooth. You
can save vCards as contacts:
You have to record a voice tag for
every number so your phone "recog-
nises" you. To record voice tags you
speak the name loudly and clearly in-
to the phone and store it.
§Options§ Open menu and select
Save contact to save vCard
as new contact.
Find
You can store about 100 voice tags.
You can assign one voice tag to each
number of a contact.
To find a contact more easily you can
either search for the contact, change
the sort order of the contact list or
set filter criteria for the list.
Recording a voice tag
Record the voice tag in a quiet envi-
ronment. You should speak into the
phone from a distance of about
25 cm. The voice tag may be 3 sec.
long.
Contacts search
Enter text/number and
confirm with C.
J
A list is displayed with contacts
which contain the text/number
sequence.
Additional information
If you use voice-activated dialling mainly
with a handsfree set it is useful to record
the voice tag with the handsfree set.
Sort contacts
The contact list is resorted.
Select sort order and con-
firm with C.
I
Open the Contacts tab.
F
I
I
Select a contact.
Select number input field.
Contacts
45
§Options§ Open menu and select
Voice dialling must be enabled
(page 124).
Record voice tag.
§Start§
Start recording.
A short signal is sounded. An
appropriate prompt appears on
the display. Speak the name (max.
3 seconds). Repeat the name after
playback. A second signal tone is
sounded and you are prompted on
the display.
Press and hold.
G
Speak the name after the signal
tone. If the name matches the saved
voice tag the number is dialled.
Confirm completed
recording.
C
If your two recordings are too differ-
ent or if they are too similar to an ex-
isting voice tag, you will be prompt-
ed to repeat recording.
§Retry§/§Restart§
Press to start recording
again.
If three attempts fail you have to
start a new voice tag.
Additional information
If there is not enough memory for a new
voice tag, a notification is displayed. Con-
firm notification, delete existing tags and try
again.
46
Call records
Redial number
Call records
Select call log list
F
I
A C
C ¢ P¢ Call records
(e.g. Missed calls).
The different call information is
listed on 5 tabs:
Select entry.
/
/
j
All calls, Dialled calls, Missed calls,
Received calls and Time & charges.
Dial number (if available),
make video call.
Navigate to tabs.
F
All calls
Access all missed, dialled and
received calls.
Each list displays the 100 most
recent calls.
Call log lists
Dialled calls
Access last numbers dialled by you.
The number of a caller is displayed if
• the caller has switched off the
Hide ID function and
Fast access in standby
mode.
/
j
A
• the network supports the Caller Id
function.
Missed calls
The numbers of calls that you have
stored for callback purposes.
b
Alternatively, a caller’s name is dis-
played if it is stored as a contact.
If the number was not transmitted
for the reasons above a message is
displayed instead.
Missed calls are displayed in standby
mode (page 17). Select entry and
Your phone stores the numbers of
calls for convenient redialling.
confirm with
calls list.
to open missed
C
Audio and video calls are stored.
Received calls
Accepted calls are listed.
Call records
47
Call log list menu
Note
Depending on the current situation,
different functions will be offered.
If the display of costs is disabled or the cur-
rency is not entered, cost information is not
displayed.
§Options§ Open menu.
Reset all incoming/outgoing calls lists
View list (see above).
Call
Dial number (if number
is available)
§Reset§
Press to reset the
current list.
View contact/
If number is saved as
AddtoContacts contact, view contact.
§Yes§
Confirm reset
notification.
If number is not yet
saved, create new
contact.
Charge settings
Settings Select and confirm
Details
Display call type (vid-
eo/voice call), number,
name, time/date and
duration of the call.
with C.
Currency
For standard functions see page 20.
(PIN2 protected)
Enter currency
(up to 3 characters).
J
Time & charges
You can display the call duration and
currency and rate of a call. You can
set the currency and rate for charge
display.
§Options§ Open menu and
select Save.
Rate
(PIN2 protected)
Last call/All incoming calls/All outgoing
Enter per minute rate.
J
calls
Select list and confirm
with C.
§Options§ Open menu and select
Save.
For the selected call type the follow-
ing information is displayed: the
date/time and the duration and
charges. For all incoming and all out-
going calls the number of recorded
calls is displayed, too.
Display costs
On/Off
Activate/deactivate cost
display and confirm
with C.
48
Camera
Displayed information
The following symbols are displayed
over the preview:
Camera
The phone has a front and rear
camera (page 6).
You can view photos/videos
recorded with the integrated
camera immediately:
current brightness setting
Ù
Ú
current zoom level
Only in picture mode and if active
self timer and flash are indicated.
• Use a picture as background
image, logo or screensaver.
The following memory information
is displayed in the bottom right
corner of the preview image:
• Send picture/video via MMS or
e-mail.
• Save pictures/videos on the phone
or on the RS MultiMediaCard
(page 11).
can be saved either on the phone
or on the RS MultiMediaCard. To
change save location see page 50.
Start the camera via the main menu:
C ¢ R
• Remaining memory: Picture
count/available record time on the
current memory location. The re-
maining memory depends mainly
on the selected resolution and the
motif.
Or
Press the side key to start
;
the camera in standby
mode and from other ap-
plications.
Additional information
Picture mode/Video mode
Select mode and confirm
When video recording is started from the
MMS application, the maximum length will
be the time allocated for messaging
(10 seconds).
with C/
.
;
The current (preview) image is
displayed.
The selected resolution is displayed
in the top line.
You can also start the camera using
the media player or MMS editor.
Camera
49
Reviewing pictures/videos
Taking pictures/videos
Confirm save notification.
C
Settings prior to taking
pictures/recording videos
The picture/video is
displayed.
The picture/video is saved with a
name, the date and the time in the
Media player folder (page 105).
Decrease/increase bright-
ness. Brightness can be
set in 7 levels (-3 to +3).
F
Open view finder to take
another picture/record
another video.
Zoom in/out in 7 levels.
I
/
C ;
For further settings see options
menu.
Or
Taking pictures
Start the camera in picture mode.
§Discard§ Delete picture/video and
open view finder.
/
Take picture.
C ;
Additional information
• If available memory is insufficient, con-
firm warning with Cand change save
location.
• If camera was launched from another ap-
plication (contacts/messages), press C
to add picture/video and return to the
original application.
Recording videos
Start the camera in video mode.
Start recording. You can
record up to 5 minutes.
/
C ;
§Pause§/§Resume§
Control recording.
§Stop§
End recording.
50
Camera
Flash
Camera options
Turn flash auto/off (only in-
cluded if flash accessory is
plugged into phone).
The following functions are availa-
ble, depending on the current
situation.
Self timer
Picture is taken approx.
10 seconds after trigger-
ing. For the last 3 seconds,
you will hear a signal tone
each second.
§Options§ Open menu.
Record
Start video recording.
New picture/
Open view finder to take
another picture/record
another video.
Picture
settings/
Video
Open settings (see below).
New video
Add
Add picture/video to
original application
(contacts/messages).
settings
For standard functions see page 20.
Play
Picture settings/Video settings
Play recorded video.
View
pictures/
View videos
Resolution front/Resolution back
§Change§ Open settings.
Open corresponding My
stuff folder (page 108).
Select resolution and con-
firm with C.
I
Picture
Switch between picture
mode/Video and video mode.
mode
A setting can be made for the quality
of the picture/video regardless of the
preview image resolution.
Switch
camera
Switch between front and
rear camera.
The resolution setting concerns the
current active camera mode. The
resolution may decrease depending
on the selected digital zoom.
Message
mode
Switch to message mode
after confirmation. Mes-
sage mode is optimised
for sending via
MMS/Bluetooth:
• record time 10 seconds
• low resolution
Message mode is activat-
ed automatically if video
mode is started from MMS
application.
Audio
record
Turn microphone on/off.
Camera
51
Default name
Flash (Accessories)
§Change§ Open settings.
If the flash is active, this is shown by
a symbol in the display. The flash is
constantly charged while connected
to the phone. This reduces the
standby time.
Enter default file name
(up to 4 digits).
J
§Options§ Open menu and select
Save.
While charging, the
symbol blinks.
Save location
§Change§ Open settings.
×
Phone memory/Card
Select default save loca-
tion and confirm with C.
Frame rate (only for video settings)
Set how many frames per second the
video should capture.
Low (7 fps)/High (15 fps)
Select and confirm
with C.
White balance
§Change§ Open settings.
Auto/Indoor/Outdoor
Select and confirm
with C.
Flicker adjustment
Adjust the sensibility to indoor light-
ening flicker rates.
Off/50 Hz/60 Hz
Select and confirm
with C.
Additional information
j
Press
to start video call with current
camera and current settings.
52
Create message
Create message
You can create SMS and MMS
messages and e-mails.
Ask your service provider whether
this service is available. You may
need to register for this service
separately.
C ¢ M¢ Create message
¢ Select message type.
Writing/sending an SMS
Additional information
You will find information on writing texts
with and without T9 in the chapter "Text en-
try" (page 26).
C ¢ M¢ Create message
¢ SMS
Enter text/add items
(see options menu).
J
SMS/MMS
§Options§ Open menu and select
About SMS
Add recipient (page 55).
You can transmit and receive long
messages (up to 760 characters) on
your phone. They are automatically
divided into concatenated SMS mes-
sages (note higher charges).
Send message.
A
C
Confirm.
If the SMS could not be sent
successfully, press §Retry§.
About MMS
Additional information
The Multimedia Message Service
(MMS) enables you to send texts,
pictures/videos and sounds in a com-
bined message to another mobile
phone or to an e-mail address. All el-
ements of an MMS message are
merged into a "slide show".
• The following is displayed in the top dis-
play line: text entry mode, number of
segments needed to send the current
message and number of remaining
characters.
• If text is too long for a single SMS, you
can choose whether to convert SMS to
an MMS or not.
Depending on your phone's settings,
you will receive either the complete
message automatically or notifica-
tion that an MMS has been saved in
the network, giving sender and size
details. You may then download it to
your phone to read it.
Create message
53
SMS options
C ¢ M¢ Create message
¢ MMS
Depending on the current situation,
different functions will be offered.
Enter text (up to
J
1024 characters)/add
§Options§ Open menu.
items (see options menu).
Add item
Sound. Select file from
the corresponding My
Remember that files may
be protected (DRM,
page 18).
If you try to add items that
cannot be sent via SMS,
message is converted to
MMS after confirmation.
§Options§ Open menu and select
Add recipient (page 55).
Send message.
A
Confirm.
C
If the MMS could not be sent
successfully, press §Retry§.
Additional information
The following is displayed in the top display
line: text entry mode, number of remaining
characters and size of the message.
Send options
Set Status report/
Validity period/SMS
current SMS. See also
SMS settings (page 67).
Further functions, see page 55.
Writing/sending an MMS
An MMS is composed of slides, each
containing text/pictures/sounds or a
video.
Navigate MMS slides.
I
Please note that media files may be
protected (DRM, page 18).
54
Create message
MMS options
View mode
Depending on the current situation,
different functions will be offered.
If you start the view mode you can
change the presentation of the
message.
§Options§ Open menu.
§Options§ Open menu.
Add item
• Picture/Video/Sound
(see SMS options).
• Text: add text to cur-
rent slide.
Play again
Start playback of all
slides.
Page duration
Select time interval (in
sec.), each slide is dis-
played when presented.
• Contact: select and
add as vCard.
• Appointment: select
and add as vCard.
Order page
Select +1/-1 to swap
current slide with
previous/next.
Add subject
Enter subject.
Preview MMS
Start view mode
(see below).
Playback
video/
Start Media player and
play back video/sound.
Playback
sound
Send options
Set Read Report, Set De-
livery Report, Validity Pe-
riod and Priority for
current MMS. See also
MMS settings (page 69).
Further functions, see page 55.
Create message
55
Add recipient
SMS/MMS options
After at least one recipient is added,
the To: field is displayed. You can add
multiple recipients.
Depending on the current situation,
different functions will be offered.
§Options§ Open menu.
Enter number/address or select
contact:
Add
recipient
See below.
Add frm Contacts
Edit
recipient
Edit entered
number/address.
Select and confirm
with Cto open contacts.
Create item
• Take picture/Record
video: start camera in
messagemode(page 50).
You may also press ;to
start the camera.
Select contact(s)/distribu-
tion list(s) and confirm
I
with C.
If you select a contact with more
than one respective entry (e.g. sev-
eral numbers), the possible entries
are displayed in a second line when
contact is highlighted:
dictating machine
(page 96).
Insert text
Save as
• Template (page 29).
• Contact Details: open
contact and select contact
information.
and select bookmark
(page 90).
Select entry you want
to use.
F
Select Draft (page 66)/
Template (page 29).
If memory is insufficient:
• SMS: confirm request if
you want to delete mes-
sages from Inbox.
• MMS: confirm request if
you want to upload MMS
to the media album =.
e.g.
Remove
picture
Remove picture/vid-
eo/sound/contact/appoint-
ment or recipient from
message.
For standard functions see page 20.
56
Create message
Writing/sending e-mails
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
C ¢ M¢ Create message
¢ E-mail
Enter text/add items
(see options menu).
J
If you enter the e-mail editor from
another application, eg. the Inbox,
all used input fields (To:, CC:, Bcc:,
Subject:, Attachment) are displayed.
Open menu and
select Add recipient
(see options menu).
§Options§
Additional information
If the cursor is at the top of the text entry,
you can navigate the input fields with
G/H.
Send message. The send-
ing progress is displayed.
A
Additional information
If you send a new e-mail, e-mails from the
draft folder will be sent as well. The
progress is displayed in terms of either the
number of bytes or the number of e-mails.
Create message
57
E-mail options
Depending on the current situation,
different functions will be offered.
Add
Add signature at the end of
the text.
signature
Send
options
See also e-mail settings
(page 70).
§Options§ Open menu.
Add
recipient
• Add frm Contacts: Open
contacts (page 38).
• Enter e-mail addr.: Enter
address manually.
For standard functions see page 20.
Edit recipient
Add subject
Edit subject
Attach item
Edit entered address.
Enter subject.
Edit subject.
• From My stuff: Select
any file (also unknown
type).
• From Contacts: Select
contact and add as vCard.
• From Calendar: Select
Appointment and add as
vCard.
Name and size of the
attachment is displayed.
Add Cc
Add contact(s) of copy
recipient(s). See also Add
recipient.
Add Bcc
Add contact(s) of copy
recipient(s) (See also Add
recipient). Bcc recipients
are not visible for other
recipients.
e.g.Remove
item
Remove highlighted
Save as draft
Confirm request to save
e-mail in draft folder
(page 66).
58
Inbox
Inbox
The inbox contains all MMS, SMS,
CB, e-mail and WAP push messages
received on the phone.
If a new MMS message is available
for downloading, the MMS notifica-
tion is displayed including
number/contact and subject of the
MMS. You can download the MMS
immediately or later:
C ¢ M¢ Inbox
Or
§Inbox§
Press and hold.
§Yes§
Press if you want to down-
load MMS immediately.
The download progress is
displayed.
Receiving messages
Or
SMS
§No§
Press if you want to down-
load later. The notifica-
tion is saved in the Inbox.
If a new SMS is received a notifica-
tion is displayed. New messages are
saved in the Inbox automatically.
When download is completed, a
notification is displayed (see SMS
section).
§View§
Press if you want to
read new message
immediately.
Or
CB
§Ignore§
Press if you want to open
message via the Inbox
later.
Some service providers offer infor-
mation services (Cell Broadcast
Service). If reception is activated
(page 74), your provider will supply
topics.
MMS
An MMS is received in two steps:
First the MMS notification, then
the MMS.
When the function is activated
(page 74), CB messages are received
automatically. Depending on the
current setting, CB messages are dis-
played in standby mode (page 17).
Inbox
59
Only one CB of the same type is
saved. If another message is re-
ceived, it overwrites the older one.
If the inbox contains a new message
a symbol is displayed in standby
mode (page 17). If you open the in-
box in this case, you directly access
the message folder containing the
new message.
E-mail
cally. Before an e-mail can be read, it
must be retrieved from the server
(page 61).
If the message is highlighted, two
lines are displayed:
• The first line contains the number
or the respective contact and the
time or date the message was re-
ceived. An icon indicates the mes-
sage type.
WAP push
WAP push messages are provided by
special service centres. Depending
on the current setting (page 89)
WAP push messages are received/re-
jected automatically or you are
prompted to accept/reject when
WAP push is received.
• In the second line either the be-
ginning of the message or the
subject is displayed.
Additional information
Make a call: Select SMS, MMS or e-mail
and press A.
If you receive the message that a
software update is available, you can
start a DM session (page 125).
SMS, MMS, CB
Inbox structure
All new messages are shown in
chronological order.
For fast access, the inbox is
organised on three tabs:
Select message and
confirm with C.
I
• MMS, SMS, CB
• E-mail
Numbers, bookmarks, e-mail
addresses, vCards and other
saveable objects are highlighted
automatically.
• WAP push messages
60
Inbox
Additional information
Additional information
• SMS messages may be stored on the
phone memory or on the SIM card. The
storage location is indicated with an icon.
oldest SMS message in the inbox auto-
matically deleted when a new message
arrives (page 68).
+-
Set volume.
Switch sound on/off.
*
Only MMS:
Navigate within a slide.
I
/
Switch to next/previous slide.
On first/last page switch to
last/first page.
ED
C
Play media file.
Options menu
Depending on the current situation,
different functions will be offered.
§Options§ Open menu.
View
Read SMS, MMS, MMS Noti-
fication or CB.
Downld
message
Download MMS if MMS noti-
fication is received.
Reply/
Select SMS/MMS and create
Reply to all message.
Forward
Forward Message to another
recipient.
• SMS: Select SMS/MMS.
• CB: Create SMS.
• MMS: Select MMS.
If you forward as SMS, at-
tached media files are re-
moved automatically.
Mark as
unread
Display message in bold
type.
Add to
Contacts
Save as contact (page 64).
For standard functions see page 20.
Inbox
61
Downloading ringtones and logos
Read options menu
You can receive links for download-
ing ringtones, logos, screensavers,
animations and information about
applications with an SMS. Highlight
this link and, by pressing the
Call key A, start the download.
Please check that the dial-in access
is configured.
Depending on the current situation,
different functions will be offered.
View
Start view mode
(page 54).
Send
CB: If e-mail address is
highlighted select MMS/E-
mail.
Remember that ringtones/logos may
be protected (DRM, page 18).
Send MMS
MMS: If e-mail address is
highlighted create new
MMS.
If more than one account is config-
ured, the list of accounts is displayed
(page 72).
Open link
Save link
If URL is highlighted: Start
browser (page 87).
If URL is highlighted: Start
browser and add URL to
bookmarks (page 90).
Before an e-mail can be read, it must
be retrieved from the server. The
e-mail application is blocked until
download is completed.
Play again
MMS: Start playback vid-
eo/audio slide.
The listed files and the options menu
vary depending on the receive server
type (page 72) of the selected
account.
e.g. Save
sound
loaded file is saved in cor-
respondingMystuff folder
(page 108).
Same for picture, text and
attachment.
Call number
If number is highlighted:
Save
appoint.
If calendar object is select-
ed: Save calendar event
(page 96).
For standard functions see page 20.
62
Inbox
POP3 account
Account
settings
Open account
The inbox on the phone contains all
the e-mails that are in the inbox on
the POP3 server.
settings for highlight-
ed account (page 72).
If no account is config-
ured create new
account.
You can configure whether or not an
e-mail is deleted on the server when
deleted on the phone (page 73).
Reply/
Reply to all
Create new e-mail.
IMAP4 account
Forward
another recipient.
The inbox lists e-mails as well as sub-
scribed folders (e.g. mailboxes). You
can subscribe to various folders on
the IMAP4 server. E-mails are re-
trieved only from the subscribed
folders.
Add to Contacts
Save as contact
(page 64).
Only POP3 account:
Delete on server
Delete e-mail on serv-
er only. The local copy
is retained.
If you delete e-mails on the phone
they are deleted on the server
automatically.
Only IMAP4 account:
E-mail options menu
Depending on the current situation,
different functions will be offered.
Subscr. to
folders
(page 63)
Move to folder
Unsubscribe
(page 63)
§Options§ Open menu.
E-mail within the folder
is deleted on the
phone only. The syn-
chronisation of e-mails
to server is stopped.
View
If only headers are re-
trieved, retrieve body
Retrieve e-mail
Retrieve new e-mail
for selected account
(page 63).
Display order
Select Folders first/
E-mail first.
For standard functions see page 20.
Retrieve all
accts
Retrieve new e-mail
headers for all config-
ured accounts.
Additional information
You can set the max. size of downloaded
e-mails (page 71).
Inbox
63
Retrieve e-mail
Move to folder
Depending on the download mode
(page 73), either entire e-mails or
only the headers are retrieved, or
you may be asked whether the entire
e-mail or only the header should
be downloaded. The number of
retrieved e-mails is displayed.
You can move e-mails from one sub-
scribed folder to another. The move
is synchronised with the server the
next time you retrieve e-mails.
Select e-mail(s) you want
to move.
I
§Options§ Open menu and select
Move to folder. The sub-
Additional information
IMAP4 accounts: only e-mails in the
subscribed folders are retrieved.
scribed folders are listed.
Select folder and confirm
with §Move§.
I
Subscr. to folders
(only IMAP4 accounts)
Read options menu
Depending on the current situation,
different functions will be offered.
You have to subscribe to folders on
the receive server in order to retrieve
e-mail from these folders.
§Options§ Open menu.
All subscribed and unsubscribed
folders on the receive server are
listed. Only two levels of folders
are supported.
Voice call/
Video call
Start voice/video call
to sender (if number
available).
Select folder(s) and con-
Go to URL
I
If e-mail address is
highlighted: create
new e-mail.
firm with Cto sub-
scribe/unsubscribe to
folders.
View/Download
Delete on phone
View/play attachment.
If not downloaded
download attachment.
§Options§ Open menu and select
Subscr. to marked.
Delete downloaded at-
tachment on phone.
POP3 account: the at-
tachment is deleted
permanently on phone
and cannot be down-
loaded again.
64
Inbox
Save sender/contact details
Go to URL
If URL is highlighted:
Start browser and load
URL (page 87).
Contact details included in a
message are displayed in the
§highlighted§ text. Numbers can be
Save as
bookmark
If URL is highlighted:
Start Browser and add
URL to bookmarks
(page 90).
dialled immediately ( ).
A
§Options§§ Open menu and select
Add to Contacts.
Save
Select To phone/To
saved in correspond-
ing My stuff folder
(page 108). Selected
vCard is saved as con-
object saved as
To exist. contact
Select and confirm
with C.
Or
To a new contact
Select and confirm
with C. Select
calendar event.
number/address type
(e.g. private number)
and confirm with C.
For standard functions see page 20
Press to confirm save
notification.
Add to Contacts
You can add contacts received via
SMS, MMS or e-mail.
C
Save vCard
§Options§ Open menu and select
You can add the following contact
details:
Save contact.
Press to confirm save
notification.
C
• contact details (e.g. number,
e-mail address) included in the
message as contact (page 37).
• vCard: contact included in a
message.
Inbox
65
DM request
WAP push
If the pushed operation causes initial
provisioning of application settings,
the device manager is started
(page 125). A notification is
displayed:
The following messages are
displayed:
• Service Indication (SI)
• Audio, video, image, text
• Service loading
§Accept§
Press to carry out action.
Reading WAP push message
Select desired message
and confirm with C.
I
Read messages/information about
received data/software. Where re-
quired start download.
Service loading message
You are connected to the browser
and the service is downloaded auto-
matically. Otherwise you are asked
whether you want to download the
service or not.
§Connect§ Press to open server
and load service.
66
Message lists
Messages are displayed the same as
in the inbox (page 58). The most
recently edited/sent message is
displayed at the top of the list.
Sent messages
C ¢ M¢ Sent messages
The list contains all sent messages
and is organised on two tabs:
SMS/MMS and e-mail.
Drafts
C ¢ M¢ Drafts
Send options
Depending on the current situation,
different functions will be offered.
The list is organised on two tabs:
SMS/MMS and e-mail.
You can save a message as a draft
while creating it. Messages are
saved as drafts automatically
I
Select message.
§Options§ Open menu.
View
• if transmission fails, or
Read message.
• you start another application
while creating a message (e.g.
you accept an incoming call).
Voice call/
Video call
Start voice/video call
to sender (if number
available).
Forward
• E-mail: Create e-mail
and send it.
• SMS/MMS: Select
SMS/MMS (menu de-
pends on selected
message type). Create
message and send it.
Additional information
E-mails are not sorted by configured
accounts. Draft e-mails are not
synchronised with the server.
Draft options
Depending on the current situation,
different functions will be offered.
For standard functions see page 20.
Select message.
I
§Options§ Open menu.
Edit
Edit Message.
Send
Send directly without editing (at
least one recipient is added).
For standard functions see page 20.
Message settings
67
Message settings
You can configure SMS, MMS,
e-mails, cell broadcast (CB), voice
mail and instant messages.
The following options are displayed:
Message centre
Enter number of
message centre.
Recipient
You can set a default
recipient for the profile.
Select Add fr. contacts
and select contact/dis-
tribution list or enter
number.
SMS settings
C ¢ M¢ Message settings
¢ SMS ¢ Select function.
SMS profiles
Validity period
Status report
Select Maximum/
1 week/1 day/
The SMS parameters are configured
in up to 5 different profiles. Profiles
can be renamed, edited and set as
default.
12 hours/1 hour.
If SMS could not be de-
livered during this peri-
od, it is deleted from
message centre
Setting default profile
If profile is already configured:
automatically.
Select profile and press
Cto set profile as default.
I
Select On/Off/Ask on
send. A status report is
sent when a message is
delivered successfully.
If Ask on send is acti-
vated, a prompt is dis-
played when SMS is
sent.
Edit profile
Select profile and press
§Edit§ to open editor.
I
Select option (see table).
I
§Select§
Send
confirmation
Press to edit option,
confirm setting with C.
Select On/Off/Ask on
send to set whether or
not a confirmation for
successfully sent mes-
sages is displayed.
SMS access
SMS memory
Select GSM/GPRS.
Select Phone/SIM as
default save location for
incoming SMS.
SMS type
Select delivery type.
=
68
Message settings
Reset profile
Auto SMS delete
If the function is activated, the oldest
SMS message in the Inbox will be
deleted upon arrival of a new SMS
message.
Select profile.
I
§Options§ Open menu and select
Restore to default.
§Yes§
Confirm request.
On/Off
Activate/deactivate and
confirm with C.
The SMS profile is reset to an uncon-
figured state. If your provider has
locked a predefined profile, it cannot
be reset.
Emoticons
Emoticons are little symbols
(Smilies) expressing your feelings.
If the function is activated, emoti-
cons are automatically displayed
as little pictures.
Auto header
If the function is activated the Head-
er template is automatically inserted
at the start of any created SMS.
On/Off
Activate/deactivate and
confirm with C.
On/Off
Activate/deactivate and
confirm with C.
Text size
Auto signature
You can set the displayed size of
the text in the SMS Viewer.
If the function is activated, the Sig-
nature template is automatically
inserted at the end of any created
SMS.
Small/Standard/Large
Select size and confirm
with C.
On/Off
Activate/deactivate and
confirm with C.
Additional information
The message sent notification is displayed,
when an SMS is transmitted successfully to
the SMS centre. The centre forwards the
SMS to the recipient.
If the message was not transmitted to the
SMS centre, you can retry once. If trans-
mission fails again, contact your service
provider.
Autosave sent
If the function is activated, all sent
SMS messages are saved automati-
cally in the Sent folder (page 66).
On/Off
Activate/deactivate and
confirm with C.
Message settings
69
The following options are displayed:
MMS settings
Name
Enter profile name.
M
C ¢
¢ Message settings
¢ MMS ¢ Select function.
Connect.
profile:
Select profile
(page 119).
MMS profiles
Internet profile:
Select profile
(page 119).
The MMS parameters are configured
in up to 5 different profiles. Profiles
can be renamed, edited and set as
sary data from your service provider
or via the "Setting Configurator"
(page 138).
Relayserver
URL:
Enter Internet address.
Secure rs URL:
Enter Internet address.
Reset profile
Select profile.
I
Setting default profile
If profile is already configured:
§Options§ Open menu and select
Select profile and
Restore to default.
I
press Cto set profile
§Yes§
Confirm request.
as default.
The MMS profile is reset to an uncon-
figured state. If your provider has
locked a predefined profile, it cannot
be reset.
Edit profile
Select profile and press
§Edit§ to open editor.
I
Select option and edit
settings.
I
70
Message settings
Select option and confirm
with C.
I
Home retrieval/Roaming retrieval
You can configure when new MMS
messages are to be downloaded
from the message server for Home
and Roaming retrieval.
Req. read report
If the function is activated a report is
sent back when the recipient reads
the MMS message for the first time.
The following settings are possible:
Automatic
Messages are automatically
downloaded as soon as an
MMS notification is received.
Yes/No
Activate/deactivate func-
tion and confirm with C.
Req. deliv report
If the function is activated a report is
sent back when the recipient has
downloaded the MMS message.
Always
ask
When an MMS notification is
received, you are asked
whether to download it or not.
Restricted
(only for Home state) When
an MMS notification is re-
ceived, only the notification is
displayed.
Yes/No
Activate/deactivate func-
tion and confirm with C.
Delivery time
Select how long an MMS message
should be held on the server before
sending it to the recipient.
Select option and confirm
with C.
I
Creation mode
You can restrict the content that can
be added to an MMS.
Immediate/7 days
Select and confirm
with C.
The following settings are possible:
Validity period
If an MMS message could not be de-
livered during this period, it is delet-
ed from the server automatically.
Free
You can add any content to
the MMS.
Warning
You are warned when attempt-
ing to add content to an MMS
that cannot be sent.
Maximum/1 week/2 days/1 day
Select and confirm
with C.
Restricted
If you attempt to add content
that is not compliant (see
above) an error message is
displayed.
Message settings
71
Hide number
Allow adverts
If the function is activated your
number is withheld from the
recipient.
If the function is deactivated MMS-
based advertisements are automati-
cally rejected.
Yes/No
Activate/deactivate func-
tion and confirm with C.
Yes/No
Activate/deactivate func-
Anon. messages
Emoticons
If set to Reject, anonymous
MMS messages are rejected
automatically.
See SMS settings page 68.
Text size
Accept/Reject
Select and confirm
with C.
See SMS settings page 68.
Max msg size
The size restriction affects down-
loaded and created MMS messages.
Allow read report
If the function is activated, request-
ed read reports are enabled.
b
95 kb/195 kb/Network max
Select and confirm
with C.
Yes/No
Activate/deactivate func-
tion and confirm with C.
E-mail settings
Allow deliv report
Before using this service you must
set the server access and your e-mail
essary data from the service provider
or via the "Setting Configurator"
(page 138).
If the function is activated, request-
ed delivery reports are enabled.
Yes/No
Activate/deactivate func-
Auto signature
See SMS settings page 68.
The e-mail parameters are config-
ured in up to 5 different accounts.
One account might be predefined by
your provider. You cannot edit pre-
defined accounts. You can activate,
edit or rename accounts.
Autosave sent
See SMS settings page 68.
72
Message settings
Edit the account according to the
information from your provider.
Additional information
Forwarded and answered e-mails use the
account that was used to receive the origi-
nal e-mail.
Select account.
I
§Options§ Open menu and select
C ¢ M¢ Message settings
Edit.
¢ E-mail ¢ Select function.
User info/Connection info/
Msg preferences/
Activating an account
If account is already configured:
Add signature/
Create signature
Select and press §Change§
(see below).
Select account and
press Cto activate.
I
I
Navigate to input fields.
Open/close input fields.
Deleting an account
C
Select account.
I
User info
You can edit the following fields:
§Options§ Open menu and select
Delete.
Your name:
Your name.
§Yes§
Confirm warning request.
E-mail address:
Your e-mail address
Additional information
All e-mails in the Inbox, the Drafts and the
Sent folders and all attachments belonging
to the deleted account are deleted.
Reply-to
address:
Additional e-mail ad-
dress to use for replies.
User ID:
Your login name for the
e-mail server.
Editing an account
The account settings are grouped in
the following areas: User Info, Con-
nection Info and Message prefer-
ence. Additionally you can add/cre-
ate a signature.
Password:
Your password for the
e-mail server.
Connection info
You can configure accounts with
two different receive server types:
POP3 and IMAP4. The configured
accounts may have different server
types.
Message settings
73
You can edit the following fields:
SMTP uses
SSL/TLS:
Select Yes/No to acti-
vate/deactivate encryp-
tion in communication
with the send server.
Data service
provider:
Select connection profile
(page 119).
Receiveserver
type:
Select POP3/IMAP4.
SMTP
Select Yes/No to acti-
authenticate:
vate/deactivate authenti-
POP3 server:
If you want to use a
cation on the send
server.
POP3 server, enter the
Internet address of the
receive server or leave
the input field empty.
SMTP
password:
A user password will be
required if "Authentica-
tion" is set to Yes. Enter
password.
POP3 server
port:
Enter the port number of
the POP3 receive server
(default: 110).
Msg preferences
You can edit the following fields:
POP3 uses
SSL/TLS:
Select Yes/No to acti-
vate/deactivate encryp-
tion in communication
with the POP3 server.
Download
mode:
Select Only headers/
All e-mails/Ask user.
Max msg size
(KB):
Enter maximum e-mail
size that is retrieved on
the phone (in KB).
IMAP4 server:
If you want to use an
IMAP4 server, enter the
Internet address of the
receive server or leave
the input field empty.
Leave copy on
server:
(Only POP3 accounts)
Select Yes/No. If No is
selected, the e-mail is
deleted on the server
when it has been down-
loaded to the phone.
IMAP4 server
port:
Enter the port number of
the IMAP4 receive serv-
er (default: 143).
IMAP4 uses
SSL/TLS:
Select Yes/No to acti-
vate/deactivate encryp-
tion for communication
with the IMAP4 server.
When delete
phone:
(Only POP3 accounts)
Select Delete on serv./
Leave on srver.
If Delete on serv. is
selected, the e-mail is
deleted on the server
when it is deleted on the
phone.
SMTP server:
Enter the Internet ad-
dress of the send server.
SMTP server
port:
Enter port number of
send server (default: 25).
IMAP4accountsalways
delete e-mail on server
when deleted on phone.
74
Message settings
Save sent
message:
CB settings
a copy of the sent
e-mails in the local Sent
folder (page 66).
M
C ¢
¢ Message settings
¢ Cell broadcast
¢ Select function.
To save sent e-mails on
server you should set
yourownaddressasCC.
Rec. broadcasts
You can activate and deactivate the
CB service. If the CB service is activat-
ed, the standby time for the phone
will be reduced.
Include orig on
reply:
Select Yes/Noto include
the original text in the re-
ply message or not.
Req. deliv.
receipt:
Select Yes/No.
On/Off
Select and confirm
with C.
Request read
receipt:
Select Yes/No.
Cell info display
You can select whether or not the
local cell information should be
displayed in standby mode.
Add signature
Select No e-mail/
New e-mail/All e-mails and
F
confirm with C.
Create signature
The signature may span multiple
lines.
On/Off
Select and confirm
with C.
Enter signature and
J
confirm with C.
Message settings
75
Topic list
Inst. message settings
You can configure the types of
broadcast messages you want to re-
ceive. The list of configured topics
is displayed. You can add/remove
topics.
C ¢
¢ Instant messaging
Open Inst. message settings
(page 83).
§Options§ Open menu.
Topic status
Select
• Receive: New mes-
sages are received
and stored in the In-
box. No notification is
displayed.
• Receive and notify:
New messages are
received and stored
in the Inbox. A notifi-
cation is displayed in
standby mode
(page 58).
• Do not receive:
Messages on this
topic are rejected.
Add topic by
list
Select topic(e.g. News)
from list.
Add topic:
index
Enter topic index
number.
Remove topic
Delete list entry.
76
Instant messaging
Manual login
When you start Instant message and
the phone is not connected to serv-
er, you are asked to login.
Instantmessagingb
C ¢ M¢ Instant messaging
This function allows text-based con-
versation with one or more users
who are also registered for this serv-
ice. This function is not offered by all
service providers. Please refer to
your service provider for further in-
formation.
Your service provider supplies you
with your account information.
User ID: Enter your user name for
Instant message service.
Switch to next line.
H
Your dialogue partners are entered
in the contact lists. When a connec-
tion has been established, these lists
show who is available, whether they
want to be disturbed and what mood
they are in.
Password: Enter password for In-
stant message service.
Press to establish a con-
C
nection to server. The
account information is
saved.
If connection is established success-
fully and no Alias has been entered
yet a notification is displayed.
Logging in/out
You have to login to Instant message
application. If you are logged in, you
are online.
Confirm to enter Alias.
C
Alias:
Enter name that should
be displayed in the con-
versation window for the
other user to see, and
confirm with C. Alias is
saved automatically.
Symbol is displayed in top
line of display if you are
online.
œ
Symbol is changed to ›if a new
message or an invitation is received.
Additional information
• The saved account information is dis-
played when you start Instant message
again. You can edit information.
• If you are already online, login and alias
are not requested when you start Instant
message.
Instant messaging
77
Auto login
Online contacts
If auto login is activated (page 85),
the phone uses saved account infor-
mation (see above) to establish a
connection to the server when the
phone is powered on.
This is a filtered list of all Instant
message contacts that are currently
online.
The icon indicates the availability:
• Green: Contact is available
• Yellow: Contact is busy.
Log out
§Options§ Open menu and select
When a contact is highlighted, the
text of the user is displayed in the
second line. An icon is displayed, if
the user is added to the private list.
Exit.
§Yes§
Press to confirm log off
request.
Instant message in offline state
Conversations
sage or a conversation invitation is
sent either via SMS or via WAP push
message (page 58).
Active (group) conversations are
listed. Up to 5 conversations can
be active at the same time.
New conversations are listed as soon
as you receive an invitation message
(page 79). To start, end and view
conversations see page 79.
The messages are stored on the
server temporarily.
If you want to join the conversation
sage application and log in. The info
message is displayed as soon as you
are online (page 80).
Contacts
Instant message contacts are stored
within the Instant message applica-
tion and on the Instant message
server. To create a new Instant mes-
sage contact you may browse the
contacts application.
Tabs overview
When you are online the following
tabs are displayed:
Availability is indicated in the same
way as in the online contacts list
(see above).
• Online contacts
• Conversations
• Contacts
• Info messages
78
Instant messaging
Add new contact
You can enter either a mobile
If the user you want to add to your
contact list has privacy settings
(page 84), the presence is not availa-
ble immediately. A request is sent to
the user. If the user confirms the re-
quest an authorisation message is
sent. Presence is displayed.
number or the Instant message ID.
<Add new contct>
Select and confirm
with C.
Navigate to input fields.
I
As long as presence cannot be dis-
played, the contact is not listed in
the online contacts (page 77).
Nickname: Enter name (optional).
Select:
Select Phone number:/
Messenger ID:.
Info messages
Entry:
Enter number/ID.
Info messages can be authorisation
messages or server messages (e.g.
knock service messages if availability
of a user changes, page 84).
§Options§ Open menu and select
Save.
Additional information
To browse the contacts application press
Info messages are stored automati-
cally if you ignore an info message or
if you are offline.
§Options§ and select Contacts.
Find new users
§Options§ Open menu and select
Find new users.
Starting/viewing/ending
conversations
Instant messages are exchanged be-
tween users in ongoing conversa-
tions. You can join up to 5 conversa-
tions. Active conversations are listed
on the Conversations tab (page 77).
Enter Screen name:/
J
Messenger ID:/Phone
number: as search criteria.
§Options§ Open menu and select
Search.
The results are listed by screen
name.
§Options§ Open menu and select
New search to configure
new search criteria.
Instant messaging
Open text input field
79
Start conversation
During a conversation you can open
the input field by pressing Cor any
key 1-9.
You can initiate a new conversation
from any tab within the Instant mes-
sage application.
§Options§ Open menu and select
Additional information
Start conversation.
• If you do not enter text for about
3 seconds, the input field disappears. Al-
ready entered text is saved and dis-
played when you open the input field the
next time.
• You cannot switch between conversa-
tions while the input field is open.
Enter text
(up to 500 digits).
J
§Options§ Open menu and select
Send.
• If a single contact is selected, mes-
sage is sent directly.
• If several contacts are selected or
if you invite additional users to an
ongoing conversation (page 80),
a conversation request is sent to
each user. The invited users have
to accept the request in order to
join the conversation. If user ac-
cepts, message is sent. If user re-
jects invitation, you receive a
reject notification.
§Options§ Open menu and select
View convers..
Each ongoing conversation is dis-
played on its own tab. The name of
the contact/group the conversation
is with is displayed as the conversa-
tion title.
The date/time of the conversation is
displayed once at the top. The dia-
logue is displayed including pic-
tures/URLs. Numbers, Bookmarks,
vCard and other saveable objects are
highlighted automatically. Sent mes-
sages are marked with <, incoming
messages are marked with >.
• If no contact is selected, the Invite
contact option is started automat-
ically (page 80).
A notification message is sent if the
user is currently offline. Depending
on your provider, sent messages
may be stored on the server until the
user logs in.
Scroll conversation
dialogue.
I
Press and hold: Accelerate
scrolling.
Navigate to conversation
tabs.
F
80
Instant messaging
View conversation options menu
Invite contacts
Depending on the current situation,
different functions will be offered.
During an ongoing conversation or
at the start of a new conversation
you may invite contacts to join in.
§Options§ Open menu.
§Options§ Open menu and select
are displayed. The
Dial
If number is highlighted:
Dial number.
availability is indicated
(page 77).
Send e-mail
Open link
If e-mail address is high-
lighted: Create e-mail.
Select contact(s) and con-
J
If URL is highlighted:
Start browser and load
URL (page 87).
firm with §OK§ to start con-
versation with selected
contacts (page 77).
Add bookmark
If URL is highlighted:
Start browser and add
URL to bookmarks
(page 90).
End conversations
§Options§ Open menu and select
End conversation. The con-
versation is closed.
Enter text
Open text input field.
Select emoticon.
Insert
emoticons
Receiving conversations
Invite contacts
Participants
Select contact (page 80).
Alerts
List of users currently
participating in the con-
versation is displayed
(see below).
An information alert is displayed
when you receive a new message or
a conversation request (page 79).
Next
Switch between
Additional information
call/Previous conversation tabs.
convers.
• If alerts are activated, the information is
also displayed when Instant message is
not open but you are online.
Further options on page 82.
• If you already have 5 ongoing conversa-
tions a notification for incoming messag-
es or invitations is displayed. If you want
to join a new conversation you have to
end an ongoing conversation first.
Instant messaging
Delete notification
81
Receive message
§View§
Press if you want to
view the conversation
immediately (page 79).
§Options§ Open menu and select
Delete message.
The user is not able to add your con-
tact details but is not added to the
block list.
Or
§Ignore§
Press if you want to view
conversation later.
Unknown user
Receive invitation message
If you receive a message from a user
who is not saved in your contacts, a
notification is displayed. The contact
is added to your contact list auto-
versation or answer the message.
You can also add unknown users to
the block list (page 84).
§Accept§
Press if you want to join
the conversation.
Or
§Reject§
Press if you want to reject
the invitation.
Receive authorisation request
Depending on your setting
(page 84) you may receive a notifi-
cation if a user attemps to save your
contact data.
Authorise
§Options§ Open menu and select
Authorise & add if the
user should be able to
add your contact details.
If the user is not saved as a contact,
the contact is saved automatically.
Block
§Options§ Open menu and select
Block contact if the user
should not be able to add
your contact details.
The user is added to the Block list
(page 84) automatically.
82
Instant messaging
Add to private
list
Inst. message options
menu
Confirm notification.
User is added to private
list (page 84).
Depending on the current situation,
different functions will be offered.
These functions can be applied to
the entry currently selected as well
as to multiple selected entries.
Add to block
list
Confirm notification.
User is blocked
(page 84).
My online
status
Set presence attributes
(see below).
§Options§ Open menu.
Settings
Open Settings menu
(see below).
Start
conversation
Start conversation with
selected contact(s)
(page 79).
Standard functions see page 20.
End
conversation
• Initial message: Reject
request.
My online status
You can configure your online sta-
tus, text, logo, mood and access
your privacy settings via the options
menu.
End conversation.
View convers.
Display conversation tab
(page 77).
Navigate to input fields.
I
Online stat.
data
Display presence details
(name, status, text, logo
and mood) of the high-
lighted contact.
Online status:
Select Available/Busy.
My text:
Enter text.
Contact
details
Display Instant message
details of the highlighted
contact (Name, Instant
message ID, Mobile
number and knock alert
status). Press §Edit§ to
open editor (page 78).
My menu Press Cto select logo
(see below).
My mood: Select mood.
§Options§ Open menu and select
Save.
Add to
contacts
Confirm safety prompt to
add user to contacts
(page 77).
If the warning message
should not be displayed
again, select §Options§
Don't show again.
Instant messaging
83
Select Logo
Online status:/My text:/My menu/
My mood:
You can either set a logo from My
Stuff or enter a URL pointing to an
image to display as logo. The maxi-
mum size for a logo is 2 KB with max-
imum resolution 100x60 pixel.
Select privacy state (see
above) for presence at-
tributes and confirm
with C.
If a logo is already set, it is displayed.
Additional information
If you set Online status: to Hidden, all oth-
er attributes are hidden as well and cannot
be edited.
§Options§ Open menu.
Insert image
Select file from My stuff
folder (page 108).
Settings
My details
Alias:
Insert link
Enter Internet address.
Remove Logo.
Clear Logo
Select and open editor
with §Edit§. Enter/edit alias
(page 76) and confirm
with C.
Privacy settings
You can configure whether or not
the attributes in My online status are
private. Possible privacy states:
Messenger ID
• Public: all Instant message users
that are not on the block list can
see attributes.
Depending on your provider you
may not be able to change the In-
the ID, you will have to log out and
enter the new ID during manual
login (page 76).
• Private: only contacts on your pri-
vate list can see the presence at-
tributes.
Watcher list
• Hidden: No user can see attributes.
All remote users are listed who have
you on their contact list. Note that
the list also contains users you have
already blocked.
§Options§ Open menu and select
Privacy.
Navigate to input fields.
I
84
Instant messaging
Private list
Alerts
All remote users are listed who can
see your private presence attributes
(page 82).
You can configure whether a notifi-
cation is displayed when you receive
new messages while Instant mes-
sage is not open and you are online.
If you want notify the server that a
contact no longer has access to your
private presence attributes:
When you are in the Instant message
application, new message prompts
are always displayed.
§Options§ Open menu and select
Del. from priv. list.
If Knock service is enabled, you will
be notified when a contact’s availa-
bility status changes from offline or
busy to available.
Block list
All remote users are listed who are
blocked from contacting you.
Navigate to input fields.
I
Remove user from block list:
Convers. requests
§Options§ Open menu and select
Select On/Off to acti-
vate/deactivate alert.
Unblock.
Add notifications
Info messages
You can configure whether or not
other users have open access to your
presence information. Other users
may need your authorisation to add
your ID to their contact list.
Select On/Off to acti-
vate/deactivate alert.
Knock service
Select On/Off to configure
alert.
Receive notific'n/No notification/
Auth. required
§Options§ Open menu and select
Save.
Select and confirm
with C.
Instant messaging
85
Sounds
Server
You can switch sounds on/off. The
settings directly correlate to the ring-
tone settings (page 112).
You can configure the server you use
for Instant Messages. Depending on
your provider you may not be able to
edit the server data.
Navigate to input fields.
I
Changes will take effect after log-
ging out and logging in again.
Receiving msgs
Select On/Off to acti-
vate/deactivate alert for
new received messages.
I
Navigate to input fields.
Server:
Enter IP address or
domain.
Sending messages
Select On/Off to acti-
vate/deactivate alert
for sent messages.
Port:
Enter number of the com-
munication port, e.g. 80.
Connect. profile:/Internet profile:
Select profile (page 119).
Alert messages
Select On/Off to acti-
vate/deactivate alert for
all notifications including
knock alerts.
Auto login: Select On startup/Off to
activate/deactivate auto
login.
§Options§ Open menu and select
§Options§ Open menu and select
Save.
Save.
Display data services:
§Options§ Open menu and select
Data services.
86
Voice mail
On/Off
Select and confirm
with C.
Voice mail
b
Most service providers supply you
with a mailbox in which a caller can
leave a voice mail for you if
The service provider supplies you
with two numbers:
Save mailbox number
You call this number to listen to the
voice mails left for you.
• your phone is switched off or not
ready to receive,
• you do not want to answer,
Select number from con-
/
H
J tacts or enter/change it
• you are making a phone call (and
if Call waiting (page 121) is not
activated).
and confirm with C.
Save call divert number
If the voice mail service is not part of
your service provider's standard
package, you will need to register for
it, and possibly set the voice mail
manually. The following sequence
may vary from service provider to
service provider.
Calls are diverted to this number.
Enter number.
J
Or
Open menu and select
C
Mailbox. Adopt number or
enter if necessary.
Settings
Listening to messages
A new voice message may be
announced as:
C ¢ M¢ Voicemail
If number is not yet entered:
§Yes§
Confirm request to open
input field.
• Icon plus beep or
• Notification via SMS or
Or open editor via main menu:
• You receive a call with an
automatic announcement.
C ¢ M¢ Message settings
¢ Voicemail
Call your mailbox and play the
message(s) back.
Voicemail no.:
Press and hold (if neces-
sary enter mailbox) and
confirm.
1
Enter number and con-
firm with C.
J
Notification
You can activate and deactivate dis-
play of a message notifying of new
voice mail entries.
Internet
87
Bookmarks list
Internet
Display the list of bookmarks stored
in the phone.
¢O¢Select function.
C
Or
Select the bookmark and
confirm with Cto call up
I
Press the key to start the
browser.
k
URL.
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
In addition, you can download
games and applications to your
phone. Internet access may require
registration with the service
provider.
History
Display the list of most recently visit-
ed Internet domains and pages. Up
to 10 domains and 30 pages per
domain can be stored.
Select the history entry.
I
Call up the URL.
C
preset option as soon as you call up
the function. Browser settings
(page 87) may be specified/pre-
assigned by the service provider.
Standard functions see page 20.
Browser settings
Change the settings of the browser.
Select one of following
Enter URL
I
functions:
Enter URL.
J
Multimedia
Choose whether or not to download
images, sounds or objects embed-
ded on the Internet pages.
§Options§ Open menu and select Go.
Start the browser and display the en-
tered Internet site.
Navigate to functions.
I
Changing the prefix
Images
Sounds
Objects
Select Show images/
Don't show.
§Options§ Open menu and select
Prefix.
Select Play sounds/
Don't play.
Enter URL prefix
J
(e.g. http://).
Select Dwnld objects/
Don't downld.
88
Internet
§Options§ Open menu and select
ID cache Select Enable service/
Disable service. Set
Save.
whether or not the
Look and feel
browser should store your
user ID and password.
Navigate to functions.
I
Cookies Select Enabled/Disabled
to activate/deactivate
cookies.
Font size Select Small/Medium/Large.
Text wrap Select Char. bounds./Word
bounds..
Link referral
Scroll step
Allow the current page to
see previous URL. Select
Allow/Do not allow.
Select Single line/Half page/
Whole page. Set the incre-
ment by which pages are
scrolled when navigating
within the Internet page.
Certificates
Display the list of stored certificates.
Connection timeout
Current
Set the maximum wait
time for the web re-
sponse. Select 30 seconds/
60 seconds/No timeout.
Display the current certificate
information.
Certificate List
Title region
Select certificate.
I
C
Set whether or not to
show title region of
phone when browsing.
Select Show/Don't show.
Display the selected cer-
tificate information, e.g.
serial number, algorithm,
validity period.
§Options§ Open menu and select
§Options§ Open menu and select
Enable/Disable for the
Save.
highlighted certificate.
Security
Navigate to functions.
I
Secure prompt
Select Yes/No. Display a
security request when
leaving a page with se-
cure connection to enter a
page that is non-secure.
Internet
89
Edit profile
WAP push
§Options§ Open menu and
You can accept or reject message re-
quests from trusted and untrusted
sources. If Ask first is set, you can de-
cide for each message request
whether or not the content should
be loaded.
select Edit.
Navigate to input fields.
Enter profile name.
I
Navi
Internet profile/Connection profile
Select profile (page 119).
Navigate to functions.
I
Start page Set current URL as start-
Trusted content/Untrusted content
Select Fetch content/
page for the profile.
§Options§ Open menu and select
Ignore/Ask first.
Save.
Lockout time
Enter lockout time
(in seconds) and
confirm with C.
§Options§ Open menu and
select Save.
Browser profiles
You can choose one of 5 browser
profiles. A browser profile is a super-
set of an Internet profile, a connec-
tion profile, a startpage URL and the
show/hide title region setting.
The current browser profile is
marked.
Activate profile
Select profile and confirm
with C.
I
90
Internet
Send link
Privacy
Browser options
Display the URL of the
current page for sending
via SMS/MMS/e-mail.
§Options§ Open menu.
Go
Load entered URL.
Change URL prefix.
Clear cache, Clear
cookies or Clear history
and confirm with C.
Set the current page as
browser startpage and
confirm with C.
Open browser settings
(page 87).
Prefix
Home
Call up the pre-set
homepage for the
current profile.
Set as
startpage
Bookmarks
list
Display the list of stored
bookmarks.
Settings
Add
Edit bookmarks. Enter
name and address and
select whether to save the
bookmark for offline
browsing.
For standard functions see page 20.
bookmark
Ending a connection
Press to end the connec-
tion and close the
browser.
B
Update
bookmark
(only if offline bookmark)
Reload bookmark.
Navigation in the browser
Enter URL
Enter the URL for direct
dial to an Internet
address.
• Select a link.
• Settings, status on/off.
C
§Back§
Press to go back a page.
Save items
Show the list of items (im-
ages/sounds) of current
options menu. Select
save location and save
selected item in My stuff
folder (page 108).
• One input field/link for-
ward/back.
• Scroll one line.
I
Tab through active content
(links on page).
F
History
Display recently visited
pages (page 87).
Entering special characters
/
* 0
Forward
Load the following page in
the current session, if
there is one.
Select special characters.
Reload page
Reload the current page.
Internet
91
Java Application Manager (JAM)
The Internet browser is under licence of:
Display the list of Java applications
currently available on the phone and
manage those applications.
I
Select application.
§Options§ Open menu.
Download
Downloads are offered on the Inter-
net. Once downloaded, the content
is available to you on the phone.
Depending on the application select-
ed, different options are available:
Select
Open the selected link.
Launch
There are 3 categories of downloads:
• Web browsing.
Launch the selected appli-
cation, that has been fully
installed.
• Open Mobile Alliance (OMA):
Download of the media content
Normally you have to pay for the
content. The Browser interacts
with the DRM (page 18) while
downloading.
Open suite
Move
Select MIDlet application
from the MIDlet suite.
Move the MIDlet application
to another folder.
Attributes
Display the MIDlet applica-
tion information, e.g.name/
version.
• Java applications are decrypted
and processed by the Java Appli-
cation Manager (JAM). When you
start the download, JAM is started
automatically (see below).
Security
Download
Reinstall
Edit the security settings of
the MIDlet application (see
page 92).
Download and install the ap-
plication, if JAR file has not
been downloaded.
Additional information
• To start the browser, see page 87.
• If you quit the browser while download-
ing: Confirm request if you would like to
continue downloading in the background.
• When the download is completed, you
can either continue browsing or use the
downloaded content via the Options
menu (e.g. set picture as wallpaper, play
sound/video).
Download and reinstall the
MIDlet application (update).
Java
settings
Select connection and Inter-
net profile (see page 92).
For standard functions see page 20.
• Downloaded content is listed in the corre-
sponding folder in My stuff (page 108).
92
Internet
Security
Additional information
You can use the browser to download applica-
tions (e.g. ringtones, games, pictures, anima-
tions) from the Internet.
Navigate to input fields.
I
Application is:
Siemens excludes all warranty and liability claims
in respect of or in connection with any applica-
tions subsequently installed by the customer and
any software not included in the original delivery
package. This also applies to functions enabled
subsequently at the customer's instigation. The
purchaser bears sole risk for the loss of, damage
to, and any defects arising in, this device or the
applications and for any direct damage or conse-
quential damage of whatever nature resulting
from the use of this application. For technical rea-
sons, such applications and subsequent enabling
of certain functions are lost in the event of the de-
vice being replaced/re-supplied and may be lost if
it is repaired. In such cases, the buyer is required
to download or enable the application again.
Please ensure that your phone has Digital Rights
Management (DRM) so that downloaded applica-
tions are protected from unauthorised reproduc-
tion. These applications are then exclusively
intended for your phone and cannot be trans-
ferred from this even to create a backup. Sie-
mens offers no warranty or guarantee nor does it
accept any liability for the customer's ability to
download or enable applications again or to do so
free of charge. We recommend that you carry out
a backup from time to time of the applications on
Select Trusted/Untrusted.
Send/rec. message:/Internet access:
Select the security permis-
sion for the application.
Available settings are:
Allow always/Ask at start/
Ask each time/Never Allow.
Java settings
Navigate to input fields.
I
Connection profile:
Select profile (page 119).
Proxy deactive:
You can configure wheth-
er or not the JAM should
use the Internet profile
when opening an http
connection. Select Yes/No.
Internet profile:
(only if Proxy deactive: is
No) Select profile
(page 119).
®
§Options§ Open menu and select
Save.
94
Organiser
Organiser
Weekly view
Calendar
Events are shown as vertical bars of
different colours on the horizontal
hour division. The first 2 upcoming
events for the current day are dis-
played below the calendar.
C ¢ Q¢ Calendar
You can enter events in the calendar.
The time and date must be set for
the calendar to work correctly.
AM/PM or 24 h display depends on
your settings (page 128).
One day forward/back or
F
one week forward/back if
Monday or Saturday is
highlighted.
The calendar offers you 3 views: dai-
ly, weekly and monthly. When you
switch the view, the current
Forward/back one hour
through the day.
I
hour/day/week is marked.
Display daily view for
highlighted day.
C
Daily view
Display events of the current day.
You can scroll from 12 AM to 11 PM.
A vertical line indicates the event du-
ration.
Monthly view
Events are shown as a horizontal line
at the bottom of the day slot. Week
numbers are displayed in the first
column. The first 2 upcoming events
for the current day are displayed be-
low the calendar.
One day forward/back.
F
I
C
Edit/New event
(page 96).
One day forward/back or
F
one month forward/back
if first or last day is high-
lighted.
Additional information
Birthdays are displayed with subject "Birth-
day" in a single hour slot at the day start
time (page 95). If a birthday event is high-
lighted, press Cto open the contact.
One row up/down or one
I
month forward/back if
first or last row is high-
lighted.
Display daily view for
highlighted day.
C
Organiser
95
Default repeat
Calendar options
Set the default repeat state for newly
created events.
Depending on the current view dif-
ferent functions are offered.
Select the required time
§Options§ Open menu.
F
frame and confirm
Delete
event
Non-repeating event:
Confirm with §Yes§.
with C.
Possible settings are: Never, Daily,
Repeating event: Select
§One§/§All§ occurrences.
Weekly, Monthly, Yearly.
Default alarm mode
Set the default alarm state for newly
created events.
e.g. Daily
view
Switch to the
daily/weekly/monthly view.
Go to date
Enter the date and confirm.
Select the required time
span before the event
and confirm with C.
F
Synchro-
nise
Initiate the synchronisation
of the calendar (page 97).
Possible settings are: 1 day before,
1 hour before, 30 mins before,
15 mins before, 5 mins before,
1 min before, Never.
Settings
Open the calendar settings
(see below).
Delete
events
Delete all events of the
day/week/month.Confirm
peating events, only the cur-
rent event is deleted.
Additional information
To set the ringtone see page 112.
Day start time
For standard functions see page 20.
Set the time displayed on the first
line in the daily/weekly view.
Settings
§Options§ Open menu and select
Select time and confirm
F
with C.
Settings.
Navigate to functions.
I
96
Organiser
§Snooze§ Select the snooze option.
Reset the alarm for
New event/Edit event
Events are displayed in all calendar
views. Overlapping events are dis-
played in parallel as different
vertical bars.
10 minutes.
§Off§
Disable the alarm.
Launch the calendar and
display the event.
C
§Options§ Open menu and select
New event/Edit event.
Additional information
Additional information
An alarm sounds even when the phone is
switched off .The phone does not go to stand-
by mode. To deactivate it press any key.
If you edit a repeating event, select wheth-
er you want to save changes to the high-
lighted event or to all occurrences: Press
§One§ or §All§.
Dictat. machine
Navigate to input fields.
I
C ¢ Q¢ Dictat. machine
Use the function to record short
memos.
Subject: Enter description of event
(max. one line).
• Use your phone as a dictating
machine when on the move.
Start date:/Start time:
Select the date/time when
event starts.
as a note for others.
End date:/End time:
Select the date/time when
To start/play back recording see
sound recorder (page 103).
Alarm:/Repeat:
Memos are saved in .amr format in
sound the folder (page 108).
Default setting is selected
(page 95). You can
change the alarm/repeat
for the current event.
Time zones
§Done§
Save the event.
C ¢ Q¢ Time zones
You can select the time zone in the
world map or the city list (page 128).
Information on the alarm
When the set date and time of the
event are reached an audio and a
visual alarm occur.
Organiser
97
Active profile
Remote sync
Select profile you want to
use for synchronisation
and confirm with C.
I
C ¢ Q¢ Remote sync
¢ Select function.
You can use this function remotely
to access externally filed data (ad-
dresses, calendar) and synchronise
these with the data on your phone.
The data can, for example, be saved
on a company computer or on the
Internet.
Edit profile
Select profile.
I
§Options§ Open menu and select
Edit profile.
Navigate to input fields.
I
Provider: Select a service provider.
URL:
Enter the URL that points
to SyncML server, e.g.:
//path.to/syncmlserver
Additional information
If you receive a update request via WAP
push (page 65), you have to confirm the
update to initiate it.
Port:
Enter the port number to
connect with the SyncML
server, e.g. 80.
Remote sync
Username: Enter your login name.
You can configure up to 5 profiles
for remote synchronisation. Before
you start the synchronisation,
check Active profile, Sync mode and
Apps to synchronise (page 98).
Password: Enter your password
(shown as a series of
asterisks).
Cont.database:
Enter the path to the con-
tact database on the syn-
chronisation server.
Initiate the synchronisation. The
computer is selected and synchroni-
sation started. When completed, the
actions which have been performed
are displayed.
Cal. database:
Enter the path to the cal-
endar database on the
synchronisation server.
Additional information
If an error message is displayed, correct
respective settings.
98
Organiser
HTTP authent.:
§Options§ Open menu and select
Enable/disable HTTP
Save to confirm.
authentication. Select
Apps to synchronise
No/Yes.
HTTP usrname:
C
Check/Uncheck highlight-
ed item. Select the data
type: Contacts, Calendar or
both.
Enter your user name
when HTTP authent.:
is active.
HTTP passwd:
§Done§
Press to confirm.
Enter your password
when HTTP authent.: is ac-
tive (shown as a series of
asterisks).
Sync log
Display a summary of the latest syn-
chronisation. The log indicates
whether the synchronisation at-
tempt was successful, e.g. date, time
and details about the synchronised
application.
Restore defaults
§Options§ Open menu and select
Restore defaults.
Sync mode
Additional information
For original Siemens Accessories, e.g.
Data Cable, see page 147. During the syn-
chronisation all applications are locked.
I
Data to sync:
Navigate to input fields.
Select whether All data or
only Modified data is to
be transferred during
synchronisation.
Sync direction:
Select the direction in
which synchronisation is
to occur. Possible
settings: Two-way,
Mob.overwrite,
Serv.overwrite
Extras
99
Extras
If Assign shortcut is selected, the con-
tacts list is opened. Select a contact.
If the contacts list is empty, select In-
itialising... to create a new contact.
My menu
Create your own menu with fre-
quently used functions, phone num-
bers from the contact list or applica-
tions. The list of 10 entries is preset.
You can, however, change it as you
wish.
SIM toolkit (optional) b
C ¢ S¢ SIM toolkit
Your service provider may offer spe-
cial applications such as mobile
banking, share prices, etc. via the
SIM card.
Using
Select an entry.
I
Confirm.
C
If you have such a SIM card, the SIM
services will appear in the main
menu under "Extras" or directly
above the softkey (on the left).
Or
If the selected entry is a
A
phone number, you can
also call it with the call
key.
Symbol for SIM services.
U
Where there are several applications,
these are displayed in a SIM services
menu. With the SIM services menu,
your phone can support future addi-
tions in your service provider's user
package. For further information,
please contact your service provider.
Change menu
You can replace each entry with an-
other entry from the selection list.
Select an entry.
I
Press to open the
function list.
§Change§
Select the new entry from
the list.
I
Confirm to save the entry.
C
If <None> is selected, the assignment
is cleared from the list.
100
Extras
End alarm
The alarm will ring at the set time,
even when the ringtone or the
phone is switched off.
Alarm clock
C ¢ S¢ Alarm clock
The alarm clock can be set for each
day of the week separately.
§Snooze§ Stop the alarm tone, and
reset it for 10 minutes.
Set alarm
The original time of the alarm is not
changed. If the phone was off when
the alarm rang, it will turn off again,
but power itself up after 10 minutes
for the next alarm.
Select day of the week.
I
Open menu and select Set
alarm.
§Options§
Set time (hh:mm).
J
Or
Open menu and select
Save. The saved alarm is
activated automatically.
§Options§
§Off§
End alarm.
The alarm remains active and will
occur at the same time in one week.
Additional information
The alarm will ring with the set melody and
volume, page 112.
Additional information
Display in standby mode:
¹
alarm clock is turned on.
Apply every day
FM radio
§Options§ Open menu and select
Apply every day.
C ¢ S¢ FM radio
To use the radio function, the stereo
headset must be connected to the
phone.
Options alarm clock
§Options§ Open menu.
Set alarm
Edit currently highlighted
If no stereo headset is connected
when the radio is started or while
the radio is active, a message to this
effect is displayed. Connect headset
or press §OK§ to return to the main
menu.
alarm and save it (see above).
Turn on/
Turn off
If alarm is off, turn is on and
vice versa.
Apply
every day
Use the time of the highlighted
alarm for every day of the
week.
For standard functions see page 20.
Extras
101
Adding a radio station to
preset list
You can add the current radio station
to the preset list.
Additional information
• Volume is set by pressing the volume
keys +/-(page 6).
• An incoming call or messages interrupts
the radio application. The radio starts
playing again after you reject or end the
incoming call.
0- 9
Press and hold.
Or
Selecting a radio station
§Options§ Open menu.
You can either select a frequency,
scan for radio stations or select a
radio station from the preset list.
Add to presets
Select and confirm
with C. The first unas-
signed preset number is
pre-selected. Press I
if you want to change
preset number.
Selecting frequency or scanning
Press briefly: Go up/down
one frequency.
/
G H
Press and hold: Start scan
mode to search for reach-
able radio stations. Con-
firm radio station with §OK§
to end scan mode.
§Select§
Press softkey and confirm
with §OK§.
To overwrite a preset number, select
a number which is already assigned.
Selecting from preset list
§Options§ Open menu and select
Preset stations.
Select station 1-10 from
I
the list and confirm
with §OK§.
You can also enter the preset
number:
0- 9
Press briefly.
102
Extras
FM radio options
Basic functions
§Options§ Open menu.
+, -, *, /
Basic calculator types
=
1/x
%
.
Result
Reversion
Convert to percentage
Decimal point
Sign change "+"/ "–"
Expansion of the range of
functions:
Square root
Square
Preset stations
Add to presets
Speakerphone
Auto store
Open list of preset radio
stations.
Add current radio station
to preset list.
±
Press §Change§ to turn
speakerphone on/off.
§Options§
Start automatic search
for the 10 strongest ra-
dio stations and stores
them in the preset list.
x
x2
e
Exponent
MS
MR
M+
Save displayed number
Call up saved number
Insert number from memory
Mono mode
Press §Change§ to turn
mono audio mode on/off.
Calculator
Unit converter
C ¢ S¢ Calculator
C ¢ S¢ Unit converter
The calculator can be used in a basic
version and with an advanced range
of functions. The input line and two
calculation lines (including the ma-
trix with the calculation functions)
are located in the top display half.
You can convert various amounts in-
to other units.
Converting the units/currency
Select the source unit/
currency.
F
Enter digit(s).
J
F I
C
J
C
Switch to the input field.
H
J
/
Navigate to functions.
Select function.
Enter digit(s).
Enter the quantity to be
converted.
Switch to the selection
field.
H
Use function. The result is
calculated and displayed
immediately.
Select the target amount/
currency. The result is
displayed.
F
Extras
103
You can use both input fields
alternately.
Sound recorder
C ¢ S¢ Sound recorder
Opens the calculator with
the current converted
value.
C
Use the sound recorder to record
noises and tones for use as ring
tones. Tone recording is normally
Special key functions:
started by other applications/func-
tions such as the "Media Player".
Set decimal point.
Change sign.
*
#
New recording
Record new
Currency
When you call up the function, you
must enter a basic currency into
which the conversions are to be
made.
Select.
If a MultiMediaCard is inserted
(page 11), select save location:
Phone memory/Card
Enter currency
(e.g. euro).
J
Select default save loca-
tion and confirm with C.
§Save§
Store entry.
The remaining recording time as well
as the available time are displayed.
Enter the name and the exchange
rate of the currency to be converted.
Press to start recording.
A brief tone sounds when
the recording starts.
C
Pause/record alternately.
C
End recording.
§Done§
The recording is saved in a file in
.wav format with a time stamp in the
sounds folder (page 108).
104
Extras
If the sound recorder was started
from another application, e.g. Media
Player, you return to that state auto-
matically.
Stopwatch
C ¢ S¢ Stopwatch
Use the stopwatch to measure time
or to save intermediate times.
Additional information
• A brief tone sounds when the remaining
time available is less then 5 sec.
• If available memory is insufficient, re-
cording is not started. If phone runs out of
memory during recording, recording
stops. An corresponding message is
displayed.
Start/Stop/Restart.
C
When stopwatch is run-
ning: Switch to lap mode.
§Lap§
After a stop:
§Reset§
Reset time to zero.
Lap mode
Playback
While the stopwatch is running, the
lap mode is available (see above). In
lap mode, a lap is counted as the
time between subsequent key
presses.
Select recording.
I
Playback/pause,
alternately.
C
§Stop§
Stop playback.
The stopwatch continues to run and
is displayed above the laps.
For volume settings and additional
options see media player
(page 105).
§Lap§
Save lap time.
Start/Stop/Restart
stopwatch.
C
After a stop:
§Reset§
Reset lap times to zero.
99 laps can be saved. The last 6 laps
are displayed.
Additional information
§Exit§
Stop and exit application.
i
Exit application, but stop-
watch continues to run.
Media player
105
Media player
C ¢ ¦
or
Select track/playlist
(page 106) and confirm
I
:
Press to launch the Media
player.
with C.
The playback is started. At the end
of the track, the next track in the
list/playlist is played automatically.
When you view a picture/video or lis-
ten to a melody, the application (e.g.
Camera, Messages, My stuff) starts
the media player automatically.
Additional information
The media player functions are ac-
cessible via 4 tabs: Music, Pictures,
Videos and Bookmarks.
If playback was started from another appli-
cation, e.g. My Stuff, playback stops at the
end of the track.
Select tab.
F
The media player offers the follow-
ing functions for music playback:
The media player contains files
stored on the phone memory
as well as files stored on the
RS MultiMediaCard (those files
are marked).
Playback/Pause depend-
ing on current state.
C
Press briefly: Skip to
previous/next track.
F
Additional information
An incoming call puts playback in the back-
ground automatically (page 23).
Press and hold: Rewind/
fast forward within the
current track (not within
live stream).
/ +/ -
I
Music
Press briefly: Raise/de-
crease volume by one
level.
The music tab includes, for example,
MP3 and AAC files. For fast access,
ing categories:
Press and hold: Set volume
to maximum/minimum.
• Playlists: Display configured/new
playlists (page 106).
• Recent: Display the 20 most
recently played tracks (up to 25).
• All: Display all saved tracks sorted
by track name.
106
Media player
If started from another application,
e.g. MMS, skip to previous/next
picture of that folder.
Create new playlist
You can order several tracks in
playlists.
Switch full screen mode
and normal view.
#
Playlists Select category on the top
level of the music tab and
confirm with C.
<New playlist>
Select and confirm
with C.
Videos
I
Select file and confirm
with C.
with C.
Add files to playlist via the options
menu (page 107).
The media player offers the follow-
ing functions for video playback:
J
Playback/Pause depend-
ing on current state.
C
(not within live stream)
F
Pictures
supported.
All files are listed with thumbnail,
file name and size.
For volume settings, see music
playback (page 105).
Display picture
Select file and confirm
with C.
The following functions can be ap-
plied to a displayed picture:
I
Bookmarks
The Bookmarks tab shows a listing of
up to 30 streaming content links on
the phone and RS MultiMediaCard.
Each URL must correspond to a sin-
gle online audio/video file. These
bookmarks are not listed as browser
bookmarks.
Zoom picture (see be-
C
low). F/ INavigate
within the picture in
zoom mode
Skip to previous/next pic-
ture in the directory.
The first line of each item is the
name of the bookmark. When select-
ed, a second line with the URL/path
to the online content is displayed.
I
Media player
107
Select bookmark and con-
firm with C. Start Play-
back music/video directly
from bookmark (live
stream).
I
Fit to screen
Slideshow
If picture is zoomed, return
to original sizing.
Start automatic flow
through pictures of current
folder. Jump to next/previ-
ous picture manually with
navigation key. Slide show
ends when all pictures in
the folder are viewed. End
manually with softkey.
Music/Video is downloaded. To en-
sure a continuous playback, the data
is buffered on the phone. The play-
back starts about 5 seconds after the
connection was established. The
buffer progress is displayed before
and during playback.
Further functions
Play/Pause
Playback/Pause current
file.
For volume settings, see music
playback (page 105).
Full screen
Open from
Enter full screen mode.
History (see below).
Media Player options
Different functions are offered de-
pending on the starting situation
and the selected object.
Create new
• Photo/Video: Start cam-
era (page 50). You may
camera.
§Options§ Open menu.
• Sound: Start Sound
Music file selected
recorder (page 103).
Add to
playlist
Open list of all tracks. Se-
lect track(s) you want to
add, press §Options§ to
open menu and select
Done. Select new/existing
playlist. The highlighted
tracks are added.
Set as
Add to bookmarks list.
bookmark
For standard functions see page 20.
History
You can access a history comprising
the last 10 files opened regardless of
their type and their storage location
(e.g. RS MultiMediaCard, online).
Streaming data is also included. If
you try to open a file which has been
deleted already, an error message is
displayed.
Remove
tracks
Delete track from playlist.
Change or-
der
Select move option de-
pending on current
position of the track.
Picture file selected
Zoom in/
Zoom out
Zoom picture.
108
My stuff
Index structure
My stuff
Files are organised in folders. Some
folders have already been created
for different data types. These fold-
ers cannot be changed: Sounds,
Pictures, Videos, Misc..
To organise your files, you can use
the file system like a PC file manager.
There are some folders in My stuff for
various data types for this purpose.
If, for example, you want to down-
load new pictures or sounds, the
download function is contained in
the relevant folder.
The phone memory tab has, addi-
and Appl.. When selected, the
number of entries is displayed.
Remember that pictures and sounds
may be protected (DRM, page 18).
The content of the fixed folders is fil-
tered. The folders contain special
media types (see table page 109).
Files that do not fit in another folder
are listed in Misc..
You can open My stuff either from
other applications, e.g. media play-
er, messages, settings or via the
main menu:
You can add personal folders on the
top level as well as subfolders. Per-
sonal folders are displayed behind
the default folders.
If RS MultiMediaCard is inserted
(page 11), folders/files are organised
on a separate tab. Files are managed
the same way as files saved on the
phone.
Personal folders on the top level can
contain mixed media types. Personal
folders can be renamed and deleted.
Select tab (phone memory/
F
Within fixed folders you can add per-
sonal subfolders, which are restrict-
ed to the media type of the fixed
folder.
RS MultiMediaCard). List of
folders/files is displayed.
Select folder/file or link
I
and confirm with C.
Additional information
§Back§
Go back to previous
folder level.
When you enter My stuff from other appli-
cations, e.g. messages, to open/send file
with a specific media type, the respective
fixed folder is opened. In that mode you can
select files of the same type stored in per-
sonal folders or in the media album via links
from fixed folders.
Depending on your selection, the file
and respective application are
opened, or the download is started.
My stuff
109
Folder Content/Options Formats
Misc.
Files of media e.g. html,
(e.g.)
types that are not wml
included in other
folders, e.g. text
modules, intenet
pages. If you try to
open a file of un-
known type an er-
ror message is
Sounds
aac+,
• Newentry:Start
sound recorder
(page 103).
aac++,
m3u, mid
amr, wav,
real audio
8/9
displayed.
Pic-
tures
Pictures
bmp, jpg,
jpeg, png,
gif
• Newentry:Start
camera in pic-
ture mode
Depending on your provider the structure,
content and functionality may differ.
Videos
Videos
3gp, H263,
MPEG4
• Newentry:Start
camera in pic-
ture mode
Themes
Load theme
(packed)
*
Theme configura-
tion (unpacked)
• select theme to
activate it.
Games
Appl.
Launch Java Ap- jar, jad
plication Manager
(page 91).
Launch Java Ap-
plication Manager
(page 91) and dis-
play list of saved
applications, e.g.
Mobile Navigation
(page 110).
*
110
My stuff
File search
For easy file search you can enter
several criteria: name, file type and
date of creation.
Options
The following functions are availa-
ble, depending on the current
situation.
§Options§ Open menu and select
§Options§ Open menu.
Search.
View/Play
New folder
Search
Start Media player and
view/play selected file.
Navigate to input fields.
I
J
F
C
Create new folder on the
current level and name it.
Enter file name.
Select file type.
Open file search dialogue
(see below).
Open date editor. Enter
number and select range
in next line.
Move/Copy
Place highlighted
file(s)/folder(s) in tempo-
rary memory.
Move: delete selection in
the originating folder.
Copy: duplicate selection
in the destination folder.
If a DRM protected file is
selected, the copy/move
option is not available.
Search results are displayed in list.
The symbol shows the save location.
Mobile Navigation
With this navigation service you use
the latest satellite and communica-
tion technology to reach your desti-
nation conveniently, quickly and
safely.
Paste
Transfer content of tem-
porary memory into cur-
rent folder. If you paste
content to another top lev-
el folder, only folders are
displayed which accept
this media type.
Note that protected items
cannot be transferred to
the RS MultiMediaCard
(DRM, page 18).
You are guided by clear maps and ar-
rows plus voice directions. The built-
in GPS receiver determines your cur-
rent position. This information, plus
details of your destination, are used
to calculate the route for you.
At the same time, the central naviga-
tion computer makes use of current-
ly available traffic information and
real time traffic data.
Assign to
contact
tone, picture or video call-
er ID to a contact.
For standard functions see page 20.
Settings
111
Settings
§Options§ Open menu and select
Profiles
Change settings.
C ¢ T¢ Profiles
The list of available settings is dis-
played. For details see correspond-
ing menu descriptions.
Several settings can be stored in a
phone profile, for example to adapt
the phone to the surrounding level
of noise.
When you have finished setting one
function, you return to the profile
menu and can change further
settings.
• 6 standard profiles are provided
with default settings: General,
Silent, Meeting, Outdoor, Car kit,
Headset. You can edit the default
settings.
Additional Information
In standby mode: Press briefly Gto
display Profile list.
• You can set and rename
2 personal profiles (User profile 1
and User profile 2).
Profile options
§Options§ Open menu.
Additional Information
Activate/
Deactivate profile.
Activate/deactivate selected
• Bluetooth Car Kits do not support pro-
files, e.g. General, Silent, Meeting, Out-
door, Car kit, Headset.
• If you change settings when not in the
profile menu, changes are not saved in
the current selected profile.
Change
settings
Change profile settings.
Return to
default
Enter phone code (page 24)
and confirm with §Yes§ to set
profile settings to default.
Activating a profile
Copy from
Copy settings from another
profile. Select profile whose
settings you want to copy
and confirm with C.
Select a default profile or
a personal profile.
I
Activate profile.
C
Profile settings
Edit a default profile or create a new
personal profile:
Headset
matically set when an original Sie-
mens headset is attached (see also
accessories, page 147).
I
Select profile.
112
Settings
Tone
Ringtones
Depending on the selected function,
the following options will be offered:
C ¢ T¢ Ringtones
On/Off
Volume
Activate/deactivate melo-
dy specified above.
You cannot turn off the
alarm clock tone.
Set the tones on the phone to suit
your requirements. The volume set-
ting controls the volume of the ring-
tone as well as the general volume
level of beeps and tones played by
different applications. The volume
setting does not affect the media
player or the FM radio.
Beep
Set ringtone to beep.
Ascending
Set ringtone to melody
with ascending volume.
Additional information
You can set the volume in 5 Levels
or switch ringtones off.
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones.
Set volume and confirm
with C.
I
While editing the volume level, the
currently set level is played.
Messaging
Melody
Melody settings on see above.
Voice calls/Video calls/
Calendar/Alarm clock
Select function and set melody and
tone for each function separately.
SMS & MMS tone/CBS alert tone/E-mail
tone
Set alert tone used for the different
types of messages.
Melody
Tone settings on see above.
Select a sound file to use as ringtone.
Select melody from My
Inst.msg sounds/Game sounds/
Startup sound/Shutdown sound
Set pre-defined sound effect for the
selected function.
I
stuff folder (page 108)
and confirm with §Select§.
On/Off
Activate/deactivate tone
and confirm with C.
Settings
113
Themes
Display
C ¢ T¢ Themes
C ¢ T¢ Display
Set Wallpaper/Logo
You can set pictures separately for
following functions:
Load a completely new user inter-
face in your phone. With the press of
a key, various functions are re-or-
ganised based on a theme, e.g.
• switch on/off animation
• switch on/off melody
Wallpaper
Background image used on standby
display.
Logo
memory space. After a download
(page 91) or a call from My stuff
(page 108), themes are automatical-
ly unzipped when activated.
Graphic to be displayed instead of
the provider logo.
Set Wallpaper/Logo
Wallpaper/Logo
In addition to the automatic ex-
change of theme parameters (e.g.
switch on/off animation), you will
have to manually set parameteres
such as Logo, Screensaver.
Select and confirm
Select file from corre-
I
sponding folder in My stuff
(page 108) and confirm
with §Select§.
Additional information
When you select a theme all the compo-
nents of the theme apply to the phone, e.g.
ringtones, wallpaper. The existing settings
might be overwritten.
Change Wallpaper/Logo
§Options§ Open menu and select
Change.
Select file and confirm
with §Select§.
I
Activating a theme
Select theme and confirm
with C.
I
If you delete an active theme, some
used elements are reset to default.
114
Settings
Screensaver
Warning!
Picture displayed when a time period
specified by you has elapsed. An in-
coming callor pressing any key will
end the function unless the safety
function is activated.
When the screensaver is manually set,
• the talk/standby time is reduced
dramatically
• the screensaver can cause irreversible
display burn-in effects.
Additional information
I
Style:
Navigate to input fields.
Select style.
The screensaver is not activated during a
voice call, IrDA or Bluetooth session, while
the camera application is active or during
video playback.
Picture:
Select file from corre-
sponding folder in My stuff
(page 108).
Set animation
You can set animations for startup
and shutdown of the phone. The an-
imation is determined by the cur-
rently active theme (page 113).
Timeout: Select standby time be-
fore screensaver is
shown.
Code protection:
Startup animation
Animation displayed when phone is
switched on.
Activate/deactivate
prompt to turn off an ac-
tive screensaver. Select
On/Off. If you activate the
prompt, you must enter
the phone code to turn
off the screensaver
Shutdown anim.
Animation displayed when phone is
switched off.
Activate/deactivate animation
Auto key lock
Startup animation/Shutdown anim.
Select and confirm
with C.
Activate/deactivate func-
tion to automatically lock
the keys when screensav-
er is active. Select On/Off.
On/Off
Activate/deactivate
animation and confirm
with C.
Settings
115
Greeting message
Set a message to be displayed in-
stead of an animation when phone is
switched on.
Vibration (silent alert)
C ¢ T¢ Vibration
To avoid the disturbance caused by a
ringing phone, you can activate the
silent alert function as an alterna-
tive. The silent alert can also be acti-
vated in addition to the ringtone
(e.g. in noisy environments).
Enter greeting
J
(up to 2 lines).
Backlight time
Set the backlight duration for the
display.
Additional information
Vibration is deactivated when the battery is
being charged and accessories are con-
nected (except the headset).
Select time and confirm
with C.
I
Brightness
Vibration
Set the brightness level for the dis-
play.
Select the vibration pattern.
Off/Standard/Helicopter/UFO/Shock/
Mosquito/Train
Decrease/increase bright-
F
ness and confirm with C.
Select vibration and
confirm with C.
Power save
Set the time when the display
goes into power save mode
automatically.
After 1 minute/After 5 minutes/
After 10 minutes/Never
Select time and confirm
with C.
116
Settings
®
Bluetooth (BT)
Connectivity
C ¢ T¢ Connectivity
Bluetooth is a short-range radio con-
nection by means of which a headset
or car kit or such can be connected
without the need for wires.
IrDA
Your phone has an infrared inter-
face. With this interface, you can ex-
change data such as pictures, ring-
tones, contacts, business cards or
organiser data with other appliances
which also have an infrared
interface.
Using the Send function in the op-
tions menu for the application con-
cerned you can also use this route to
send data.
Each Bluetooth device has its own
specific address and can be given a
self-explanatory name as an option.
Password protection ensures the se-
curity of a Bluetooth connection, as
does including the BT partner in a list
of "confidential" devices.
The infrared interface is on the left
side of the phone. The distance be-
tween the two devices must not ex-
ceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
To establish a Bluetooth connection
between your phone and other Blue-
tooth devices you must activate the
function.
IrDA active
On/Off
Activate/deactivate the in-
frared interface and con-
firm with C.
The Bluetooth® word mark and logos are
owned by the Bluetooth SIG, Inc. and any
use of such marks by Siemens is under
license. Other trademarks and trade names
are those of their respective owners. Blue-
tooth QDID (Qualified Design ID): B02421
If IrDA (Infrared) is activated, Blue-
tooth is deactivated and vice versa.
Shown on display:
¯
IrDA activated.
®
During transmission.
File location
Select where the files are to be
stored after being transferred via
IrDA.
Phone/MultiMediaCard
Select and confirm
with C.
Settings
117
Bluetooth active
On/Off
Search
Activate/deactivate
Search for specific categories of de-
vices or for all Bluetooth devices.
Bluetooth and confirm
with C.
All devices/Audio/Phone/PC
Select and confirm
with Cto start search.
Found devices are displayed in a list
(for list options see page 118).
If Bluetooth is activated, IrDA (Infra-
red) is deactivated and vice versa.
Bluetooth reduces the phone’s
standby time if it is activated.
Shown on the display:
If Audio is selected Headsets, Car kit
and audio or video devices are listed.
¨
Bluetooth activated.
Known devices
Display the list of known devices.
Bluetooth visible to other
users.
©
ª
«
During transmission.
Last connected
Call on Bluetooth device
accepted.
Display the list of last 10 connected
devices, including those that are
currently connected.
File location
My BT name
Select where the files are to be
stored after being tranferred via
Bluetooth.
Display device address. Enter the de-
vice name that is shown to other BT
devices when they request this (see
Bluetooth visibility).
Phone/MultiMediaCard
Select and confirm
with C.
Enter BT name for your
J
phone (up to 16 charac-
ters) and confirm
with C.
If no name is entered, the device ad-
dress is shown to other BT users (the
device address cannot be changed).
118
Settings
Bluetooth visibility
GPRS
b
The device address/name is shown
or not to other BT devices if they re-
quest this in order to receive or send
data.
(General Packet Radio Service)
GPRS can be enabled or disabled de-
pending on your service provider.
Select one of the follow-
Data counter
Display the data transfer information
for GPRS and UMTS.
I
ing options and confirm
with C.
On/Off
Activate/deactivate
visibility.
Reset the data counter
and confirm with C.
C
Auto
Set visibility for 5 minutes,
then visibility is disabled
automatically.
List options
Depending on the current list
(known or last connected), different
functions will be offered.
I
Select device from list.
§Options§ Open menu.
Trust/ Do
not trust
Enter the password to trust
the device or remove trust
option of device.
Trusted devices are added to
the known list automatically
and do not require the pass-
word to connect.
View
details
Display the device details:
Name:, Device type: and
Address:.
Add to
known list
Add the device to the known
list.
New
search
Start a new search.
Settings
119
Connect'n profiles
b
Internet profiles
b
Depending on your provider up to
25 profiles may be preset containing
a collection of settings utilised by ap-
plications. Depending on your pro-
vider you may rename/edit/delete
the profiles via the options menu.
Depending on your provider up to
25 profiles are preset containing a
collection of settings utilised by ap-
plications. Dependig on your provid-
er you may rename/edit/delete the
profiles via the options menu.
Select profile from list and
confirm with C.
The following information is dis-
played and may be edited:
Select profile from list and
confirm with C.
The following information is dis-
played and may be edited:
I
I
Profile name:
Profile name:
Default/changed name.
Default/changed name.
APN:
Access point name (URL).
Your login name.
Type:
Select profile type: HTTP/
WAP.
Login:
Security: Select security mode.
Password: Your password.
Proxy server:
Authentication:
IP address or domain of
the server used for Inter-
net access.
Select authentication
mode: Normal/Secure/
<None>.
Proxy port:
DNS 1 (opt):, DNS 2 (opt):
Communication port of
the server.
The IP addresses of the
used primary/secondary
DNS server. DNS servers
are used on the Internet
to translate IP addresses
into domain names and
vice versa.
Login:
Your login name.
Password: Your password.
Your provider will supply you with
your login and password.
Your provider will supply you with
your login and password.
Linger time
Depending on your provider you may
be able to specify the linger time
which will apply to all applications.
b
Enter time
(1-999 seconds).
J
120
Settings
Start function/call number
The function is started or the
number is dialled at the touch of
a button.
Shortcuts
You can assign one important
number/function to each softkey,
the navigation key (every direction)
and the number keys 2 to 9 (speed-
dial numbers).
Press and hold key to start applica-
tion/dial number.
C ¢ T¢ Shortcuts
Select key
Pre-defined key functions
The following key functions are pre-
defined. You cannot change their
function.
Left soft key/Right soft key
Select key and confirm
with C.
Open Contacts (page 37).
H
Dial the mailbox number
(page 86).
1
Navigation key
Select and confirm
with C. Select
0
Switch between two
connections during a call
(page 132).
Up/Down/Left/ Right and
confirm with C.
Number keys
Additional information
Select and confirm
with C. Select number
key and confirm with C.
The service provider may have already as-
signed functions to a softkey (e.g access to
"SIM services" or direct call-up of the Inter-
net portal). It may not be possible to modify
this key assignment.
Set/change shortcut function
Select function and con-
firm with C.
If you assign a contact, the contact
application is opened for selection.
The left softkey may sometimes be re-
placed automatically by p/Àto access
a new message for example.
I
Additional information
If no function is assigned, you can set a
function if you
• press and hold the number key in
stand-by mode
• press the softkey briefly.
Settings
121
Or
Call setup
Check status
C ¢ T¢ Call setup
Select to display
current setting.
¢ Select function.
Hide ID
b
Diverts
You can specify the conditions
under which the call types should be
diverted to your mailbox or other
numbers.
When you make a call, your number
can be shown on the display of the
called party or suppressed. You may
need to register separately with your
service provider for these functions.
Additional information
The different call types are described
below.
Select one of the follow-
ing options and confirm
I
with C.
Confirm the warning
On/Off
Activate/deactivate dis-
play of the number for all
subsequent calls.
C
message.
Divert video calls/voice calls
Next call only
Activate/deactivate dis-
play of the number just for
next call.
Voice calls/Video calls
Select call type and con-
firm with C.
All video calls/All voice calls/
Unanswered/Not reachable/
No reply/Busy
Check status
=
The current setting is
checked on the network
and displayed.
Select option and confirm
with C.
Additional information
The setting applies to voice and video calls.
§Options§ Open menu and select
Set.
Call waiting
If you are registered for this service,
set call waiting.
b
Enter the number you
J
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
On/Off
Activate/deactivate call
waiting and confirm
with C.
122
Settings
Divert other call types
All calls
All calls are diverted.
b
b
All calls/Data/Fax/Messages
Select a call type and con-
Symbol in the top line of
the display in standby
mode.
Ç
firm with C.
§Options§ Open menu and select
Set.
Unanswered
Enter the number you
J
A call is diverted in the following sit-
uations: Not reachable, No reply, Busy
(see below).
want to divert to. Or se-
lect Contacts from the op-
tions menu and select a
contact.
Not reachable
A call is diverted if the phone is
switched off or is out of range.
b
Check status
b
§Options§ Open menu and select
No reply
b
Check status.
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
You can check the current divert
status for all conditions. After a
short pause, the current situation is
transmitted by the network and
displayed.
Busy
b
A call is diverted if another call is in
progress. If you activated Call waiting
(page 121), you will hear the call
waiting tone during a call (page 33).
Clear all
b
§Options§ Open menu and select
Clear all.
All set diversions are cleared.
Confirm with C.
Additional information
Fax
b
Fax calls are diverted to a number
with a fax connection.
Note that the divert is stored in the network
and not in the phone (e.g., when the
SIM card is changed).
Data/Messages
Data calls are diverted to a number
with a PC connection.
b
Reactivate divert
The last divert has been stored. Proceed
as with "Set divert". The stored number is
displayed. Confirm number.
Settings
123
Select image
Any key answer
When you do not want to transmit
your video image to the caller (Show
my image is deactivated) you can se-
lect a video mute picture that is
shown instead.
Incoming calls can be accepted by
pressing any key (except for B).
On/Off
Activate/deactivate and
confirm with C.
Select one of the follow-
Auto volume
I
ing options and confirm
Set automatic gain control (AGC)
and automatic volume control
(AVC). This feature automatically
controls earpiece volume and micro-
phone sensitivity depending on
ambient noise level.
with C.
Standard
Custom
Display the default video mute
turer or the service provider.
Select a picture from My stuff
(page 108) folder.
On/Off
Activate/deactivate and
confirm with C.
Video calls
Additional information
You cannot send protected files during a
video call (DRM, page 18).
Specify the additional settings for
video calls.
Show my image
If the function is activated your video
image is always transmitted to the
caller during a video call.
If the function is deactivated, you
can choose whether or not to send
the video image when you receive
an incoming video call.
On/Off
Activate/deactivate and
confirm with C.
124
Settings
Key tones
Set the tone that is played when
pressing keys.
Phone
C ¢ T¢ Phone
¢ Select function.
C ¢ T¢ Shortcuts
Language
Set the language of the display text.
¢ Key tones
Tone/Silent
Select and confirm
with C.
Display language
Show the currently set display lan-
guage. When Automatic is set, the
language of your home service pro-
vider is used.
Info tones
Set the service and alarm tones.
On/Off
Activate/deactivate T9
and confirm with C.
Input language
Select a language for text entry. Lan-
guages with T9 support are marked
with the T9 symbol. When Automatic
is set, the input language is based on
the display language.
Voice dialling
If this function is enabled, you can
enter voice-activated dialling when
you press and hold Gthe
navigation key.
If a language that you do not under-
stand happens to be set, the phone
can be reset to the language of your
home service provider with the fol-
lowing input (in standby mode):
On/Off
Activate/deactivate and
confirm with C.
File system
# 0 0 0 0 # A
*
Format card
T9 mode
Format the RS MultiMediaCard and de-
lete all saved data. Formatting can
last longer than one minute.
Set T9 (intelligent text entry) or the
multi-tap as default text entry meth-
od for most of the text entry items.
Press to confirm request.
C
On/Off
Activate/deactivate T9
and confirm with C.
Settings
125
Eject card
Device manager (DM)
Eject the RS MultiMediaCard from the
phone safely without losing data
that is still being transmitted to the
card.
Sessions can be initiated in different
ways.
• Manual session: You start the DM
Press to confirm request.
C
• WAP push: Your service provider
initiates a DM session via WAP
push (page 65). You receive an
Over The Air Provisioning (OTAP)
message. The message is dis-
played. Confirm the request to
start the DM session.
If card is still busy, confirm the error
message with Cand try again later.
Memory assistant
Start the memory assistant
(page 21).
The OTAP message can be protect-
ed and you may need a PIN to
open it. Contact your provider for
further information.
Phone identity
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
• Software update: The phone
checks the software status each
time it is switched on. If an update
is available a request is displayed.
Confirm the requests to start the
software update and to re-boot
your phone.
Switch between tabs to
display additional infor-
mation about the device.
F
Device check
After the last information page,
a self-test as well as the individual
test are offered. If you select Self test,
all individual tests are carried out.
Additional information
If you want to start a session the battery
must be charged at least 50%.
Software version
To display the software version for your
phone in standby mode:
The phone default settings vary from
service provider to service provider
and can be as follows:
# 0 6 #, and select the Configuration tab.
*
• The settings have already been
implemented by the provider. You
can start immediately.
126
Settings
• Access profiles have already been
created by your provider. Select
and activate a profile.
Profile options
§Options§ Open menu.
Activate
Activate the highlighted profile.
• The access profiles must be con-
figured manually. If necessary,
check with your service provider
for details. You will find the cur-
rent settings for the service pro-
vider on the Internet at
www.siemens.com/
under "FAQ".
Edit
profile
Edit the highlighted profile (see
below).
Restore
defaults
Restore the profile to the
default values.
For standard functions see page 20.
Edit profile
I
Navigate to input fields.
Manual session
Displaythecurrentlyactiveprofileand
summary results of the last session.
Address: Enter the server address.
Port:
Enter the port number to
connect with the server,
e.g. 80.
§Options§ Open menu.
Start
Start the DM session.
Provider: Select a service provider.
Select
profile
User name:
Select a profile (profile
options see below).
Enter your login name.
Password: Enter your password
(shown as a series of
asterisks).
Last
session
Show the details of the last
session (e.g. date, time,
additional info).
Server ID: Enter the server ID.
Resume
session
If the last session can be re-
sumed: resume last session.
Server password:
Enter your password
(shown as a series of
asterisks).
For standard functions see page 20.
Settings
127
HTTP authent.
Master reset
Reset the phone to default values
(factory setting). This does not affect
the SIM card or the network settings.
Enable/disable HTTP
authentication. Select
No/Yes.
HTTP name:
Alternatively enter in standby mode:
Enter your user name
when HTTP authent. is
active.
# 9 9 9 9 #
A
*
Enter the phone code
J
(page 24) and confirm
with C.
HTTP password:
Enter your password
when HTTP authent. is ac-
tive (shown as a series of
asterisks).
128
Settings
§Options§§
Open menu and select
option.
Clock
C ¢ T¢ Clock
Set time
zone
Set a new time zone for the
selected city. Confirm with
§Yes§.
The clock must be set correctly once
at start-up (page 16).
Auto time
Enable/disable automatic
update of the time and the
time zone.
Setting the time and date
Time/Date Select and confirm
with C.
Search city
Open the city list and select
a city.
Enter time
/
I
J
(hours/minutes) or date
(day/month/year) and
confirm with C.
For standard functions see page 20.
Additional information
If Auto time is activated (page 129),
the network time is displayed.
If you changed the time zone:
• Alarm clock is changed to the current
time zone.
• Calendar events are not affected by time
zone changes.
Additional information
• Press lto reset time/date.
• If the battery is removed for longer than
30 seconds, the clock is reset automati-
cally.
Time format
Set the display format for time used
in various applications.
Time zone
The world clock shows the current
system time, the time zone (grey
vertical bar on the map), the time
zone name and the time in the se-
lected city.
24-hour/12-hour am/pm
Select and confirm
with C.
The time zone can be changed:
Select the desired setting
and change the time zone
in the world map.
F
Select a city in the select-
ed time zone.
I
Display set time zone.
C
Settings
129
Date format
Set the display format for date.
Auto time
If you activate auto time, the time
zone is switched automatically to
local time by the network.
b
Select date format and
confirm with C.
I
On/Off
Activate/deactivate and
confirm with C.
Show clock
Set the time and date display in
standby mode.
On/Off
Activate/deactivate and
confirm with C.
130
Settings
PIN codes
Description on page 24:
Security
C ¢ T¢ Security
PIN control, Change PIN, Change PIN2,
Change phonecde
¢ Select function.
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
pressed for one minute in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
This SIM only
(PIN2 or phone-code protected)
The phone can be linked to a SIM
card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
b
If the phone is to be used with a
different SIM card, enter the phone
code when requested.
On/Off
Activate/deactivate and
confirm with C.
Additional information
The keypad can also be directly locked and
unlocked in standby mode. In each case:
On/Off
Activate/deactivate and
confirm with C.
#
Press and hold.
Barrings
b
Barring restricts the use of your SIM
card (not supported by all service
providers). You need a 4-digit net-
work password for network barring.
Your service provider will supply you
with this password. You may need to
register separately for each barring.
Only
b
(PIN2 or phone-code protected)
Dialling options are restricted to the
SIM protected numbers in the con-
tacts. If only area codes are entered,
relevant numbers can be added to
these manually before dialling.
Activate/deactivate Barrings
Confirm warning
C
If the SIM card does not support PIN2
input, all the contacts can be protect-
ed with the phone code.
message.
Select call type described
I
below and confirm
with C.
On/Off
Activate/deactivate and
confirm with C.
Settings
131
Activate/Deactivate
Select and confirm
Status check
Check the status of selected or all call
type(s).
with C.
Enter the network pass-
word and confirm
with Cto activate/deac-
tivate barring for selected
call type.
Enter the network pass-
word.
J
J
C
Confirm barring message.
Clear all
Confirm barring message.
All barrings are deleted.
C
Enter the network pass-
All outgoing
All outgoing calls except emergency
numbers are barred.
J
C
word.
Confirm to clear all
barrings.
Outg. internat. (International outgoing)
Only national calls can be made.
Content downl'd ?
Outg. int. x home (International outgoing
without home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
Enable or disable a content down-
load notification (page 18).
On/Off
Activate/deactivate and
confirm with C.
All incoming
The phone is barred for all incoming
calls (forwarding of all calls to mail-
box provides a similar effect).
Enable/disable warning message
when a license is about to expire
(page 18).
When roaming
Warn of expiry/Don't warn
Select and confirm
with C.
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
Check status of selected call type or
of all call types.
132
Settings
Network info
Retrieve information about the net-
work operator currently set. Infor-
mation is displayed.
Network
C ¢ T¢ Network
¢ Select function.
Confirm network info.
C
Select line
b
This function is only displayed if it is
supported by the service provider.
Two separate numbers must be regis-
tered on the phone.
Choose network
Start network search. This is useful if
you are not in your home network or
network.
Select the currently used
line and confirm with C.
I
If Auto network is activated
(page 133), confirm request to deac-
tivate the auto network function.
Additional information
This setting affects only outgoing calls. You
may still receive calls on the other line.
The list of networks currently availa-
ble is displayed.
Lock/unlock lines
(PIN2-code protected, see page 24)
You may limit the usage to one
number. If you lock a line, you can-
not select this line until it is un-
locked. You can lock only one of the
lines at once.
Select network.
I
§Options§ Open menu.
Info
Display network information.
Select
Set as current network
operator.
Select line.
I
§Options§ Open menu and select
Lock/Unlock.
Enter PIN2 and confirm
J
with Cto lock or unlock
selected line.
Additional information
Special settings may be made for each
number (e.g. melody, call divert etc.) To do
this, first switch to the required number.
Settings
133
Auto network
Mode selection
Make sure that your service provider
supports the selected mode.
b
If you activate this function, the
phone searches automatically and
selects the next network on the pre-
ferred network list. Otherwise you
can select a different network
Select Automatic/GSM only/
I
UMTS only and confirm
with C.
manually from the network list.
§Options§ Open menu and select
On/Off
Activate/deactivate func-
Save.
Additional information
When function is deactivated, the
Choose network function is started au-
tomatically (page 132).
Combinations of several modes may be
prohibited. Confirm the error message and
change selection.
Preferred network
Fast search
If you activate this function, the
phone searches for a network faster
(standby time is reduced).
Display a list of preferred networks.
Customise the list by changing
entries.
Select entry.
I
Open menu and select
Change.
On/Off
Activate/deactivate func-
tion and confirm with C.
§Options§
Select network and con-
firm with C.
I
Additional information
If you are outside your home network, your
phone automatically dials another network.
If the signal strength of the preferred net-
work is inadequate when you switch on the
phone, the phone may register in a differ-
ent network.
134
Settings
Announce caller
Accessories
Caller ID of an incoming call is an-
nounced to user.
C ¢ T¢ Accessories
¢ Select function.
On/Off
Activate/deactivate and
confirm with C.
Car kit
Car loudspeaker
The Car kit profile is activated auto-
matically as soon as the phone is
connected to the car kit.
Use the car loudspeaker as default
for each new call made while con-
nected to the car kit. This may im-
prove the playback quality.
Edit profile
To edit the Car kit profile see
page 111.
On/Off
Activate/deactivate and
confirm with C.
Auto answer
Voice and video calls are accepted
automatically after a few seconds.
Additional information
This setting is not available (hidden) if
Bluetooth portable or Car Kit portable is
attached to phone.
On/Off
Activate/deactivate and
confirm with C.
Auto off
Additional information
• Auto answer does not apply if you are
already in a call.
• If you do not notice that your phone has
accepted a call, there is the danger that
the caller may eavesdrop.
The phone is powered by the power
supply of the car. You can adjust the
time between switching off the igni-
tion and the automatic switching off
of the phone.
Enter time when phone
J/ I
Accept by voice
Voice and video calls may be accept-
ed by voice command.
should switch off.
§Enable§
Enable function.
Or
On/Off
Activate/deactivate and
confirm with C.
§Disable§ Disable function.
Additional information
This setting is not available (hidden) if
Bluetooth portable or Car Kit portable is
attached to phone.
Settings
135
Read SMS
Edit profile
(only for Car Kit Bluetooth)
To edit Headset profile see page 111.
SMS messages received on the
phone are read via TTS when the
phone is attached to the car kit.
Auto answer
Voice and video calls are accepted
automatically after a few seconds.
On/Off
Activate/deactivate and
confirm with C.
On/Off
Activate/deactivate and
confirm with C.
Key assignments
(only for Car Kit Comfort)
You can assign new functions to
keys on the car kit.
Additional information
• Auto answer does not apply if you are
already in a call.
• If you do not notice that your phone has
accepted a call, there is the danger that
the caller may eavesdrop.
Key 1/Key 2/Key 3
Select the key and con-
firm with C.
Charge via USB
Phone is charged via USB when con-
nected to a computer via USB cable.
Select function and con-
firm with C.
I
Headset
Only in combination with an original
Siemens handsfree headset
On/Off
Activate/deactivate and
confirm with C.
(page 147). If an original Siemens
headset is used the Headset profile is
automatically activated when the
headset is plugged in.
136
Mobile Phone Manager
Mobile Phone Manager
MPM (Mobile Phone Manager) ena-
bles you to use extended phone
and PC communicate via IrDA, Blue-
tooth or a data cable (see Accesso-
ries, page 147).
Backup and restore
With the backup function, you can
regularly make a copy of your phone
data on the PC. If you ever lose the
data on your phone or replace the
phone, you can quickly retrieve all
data with the restore function.
Please observe all applicable restric-
tions for DRM protected data.
You can download the newest ver-
sion of MPM from the Internet:
Please consult the help files and the
readme file for further information
on the functions and use of MPM.
Bookmark Management
Organiser
Use your PC to browse the Internet
and define your preferred Internet
sites. Save the Internet addresses as
bookmarks on your phone so that
you can quickly call them up at a lat-
er time when you are on the move.
With the Organiser you can adminis-
ter the contacts of your phone,
Outlook® and other Siemens phones
(including Gigaset).
Mobile Phone Manager
137
Phone Explorer
Plug & Sync
With Phone Explorer you can access
your phone's data fast and comforta-
bly. The phone is simply added to
your PC's file structure as if it was just
another folder on your PC.
Plug & Sync can relieve you of rou-
tine tasks. With "Music > Phone" you
can always transfer your up-to-date
music files and playlists to the phone
automatically. With "Photos > PC"
you can transfer your newly taken
pictures to the PC.
Mobile Modem Assistant
SmartSync
Mobile Modem Assistant quickly and
effortlessly sets up an Internet con-
nection over your mobile phone so
that you can at once surf the Internet
at home or abroad without difficulty.
With SmartSync you can synchronise
your data with Outlook®, OutlookEx-
press® or Lotus Notes™ as soon as
your phone is connected to the PC.
New and edited contacts are syn-
chronised automatically as are mes-
sages and appointments.
Media Pool
Media Pool offers you a convenient
way of managing ringtones, music,
playlists and videos. You can move
music files to your phone and auto-
matically convert them into a suita-
ble format in the process.
138
Questions & Answers
Questions & Answers
If you have any questions about using your phone, visit us at
www.siemens.com/mobilephonescustomercare any time. For additional help, we have
listed below some frequently asked questions and answers.
Configuration service
To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,
you can use a configuration service. This service is used to have the necessary settings for
your mobile phone sent to you by SMS. We recommend that you contact your network
provider who will send you the configuration messages.
As an alternative you can also use the "Setting Configurator" at
www.siemens.com/mobilephonescustomercare. Siemens will then send you the
configuration messages. Please follow the instructions contained in those messages.
Problem
Possible causes
Possible solution
Phone cannot be
switched on.
On/Off key not pressed long
enough.
Press On/Off key for at least two seconds.
Flat battery.
Charge battery. Check charging indicator in
the display.
Battery contacts dirty.
Clean contacts.
See also below under "Charging
error".
Too little standby
time.
The operating time depends on the respective operating conditions.
Extreme temperatures significantly reduce the phone's standby time!
Some settings/functions nega- It may be useful to restrict the use of the following
tively affect the standby time.
functions in order to improve the standby time:
Bluetooth function, Cell Broadcast, Infrared inter-
face, Silent Alert/Vibrator Alarm, Fast Search,
GPRS, display illumination (can be adjusted to a
lower level or switched off), frequent use of organ-
iser and games, continuous animated screensaver.
Data cable connected.
When a data cable is connected, the battery will be
data connection at all. Connect data cable only if
necessary.
Unintentional keystrokes
(illumination!).
Activate auto key lock (page 130).
Questions & Answers
Possible solution
139
Problem
Possible causes
Charging error
(charge icon not
displayed).
Battery totally discharged.
1) Plug in charger cable, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Charge battery.
Temperature out of range:
+5 °C to +45 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem
Check power supply and connection to the phone.
Check battery contacts and phone connection
socket, clean them if necessary, then insert battery
again.
No mains voltage.
Use different mains power socket, check
mains voltage.
Wrong charger.
Battery faulty.
Replace battery.
SIM error.
SIM card not inserted correctly. Check that the SIM card is inserted correctly
(page 10).
Dirty SIM card contacts.
SIM card with wrong voltage.
Clean SIM card with a dry cloth.
Use 3V SIM cards only.
SIM card damaged
(e.g. broken).
Carry out a visual check. Change SIM card at
service provider.
No network
connection.
Weak signal.
Move higher, to a window or an open space.
Complain to the service provider.
Outside GSM/UMTS range.
Invalid SIM card.
New network not authorised.
Try manual selection or select a different network
(page 132).
Network call barring is set.
Network overloaded.
Signal too weak.
Try again later.
Phone loses
network.
Reconnection to another service provider is auto-
matic (page 133). Switching phone off and on
again can speed this up.
Calls not possible. Second line set.
New SIM card inserted.
Set first line (page 132).
Check for new barrings.
Reset limit with PIN2 (page 24).
Load credit.
Charge limit reached.
Credit used up.
140
Problem
Questions & Answers
Possible causes
Possible solution
Certain uses of
phone not possible.
Call restrictions are in place.
Barrings can be set by service provider. Check
barrings (page 130).
Impossible to make Memory is full.
entries in contacts.
see page 20) or call up memory assistant
(page 21).
Voice mail not
functioning.
Call divert to mailbox not set.
Set call divert to mailbox (page 86).
flashes to
SMS memory is full.
MMS memory full.
Phone memory full.
Delete (For standard functions see page 20) or call
up memory assistant (page 21).
Delete MMS (For standard functions see page 20).
ã
indicate an SMS.
flashes to
indicate an MMS.
ä
flashes to
indicate an MMS.
Delete messages, pictures, videos, games or
applications or call up memory assistant (page 21).
å
Function cannot be Not supported by service
set. provider or registration required.
Contact your service provider.
Capacity problems Phone memory full.
with, for example,
Games & More,
Delete files in the relevant areas. You can use the
memory assistant to delete specific files (page 21).
ringtones, pictures,
videos, SMS ar-
chive.
No WAP access,
downloading not
possible.
Wrong or incomplete WAP
settings.
Check WAP settings (page 89). If necessary ask
your service provider.
Text message
cannot be sent.
Service provider does not
support this service.
Contact your service provider.
Number for service centre not Set service centre (page 67).
set or incorrectly set.
SIM card contract does not
support this service.
Contact your service provider.
Service centre too busy.
Repeat message.
Recipient does not have a com- Check.
patible phone.
No Internet access Wrong or incomplete WAP
possible. settings.
Check WAP settings (page 89) and contact your
service provider if necessary.
Questions & Answers
Possible solution
141
Problem
Possible causes
PIN error/
PIN2 error.
Three wrong entries.
Enter the PUK (MASTER PIN) supplied with the
SIM card according to the instructions. If the PUK
(MASTER PIN) has been lost, please contact your
service provider.
Phone code error. Three wrong entries.
Contact Siemens Service (page 142).
Service provider
code error.
No authorisation for this service. Contact your service provider.
Too few/too many Functions may have been add- Check with your service provider.
menu entries.
ed or deleted by the service pro-
vider via the SIM card.
No fax possible.
Wrong settings in the PC.
Check settings.
No authorisation for this service. Contact your service provider.
Charge meter does Charge pulse is not transmitted. Contact your service provider.
not work.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
connector contacts thoroughly. Stand mobile upright in an air current. Do not
dismantle the phone!
Reset all settings to factory default, page 125: # 9 9 9 9 # A
*
142
Customer Care
Customer Care
If repair work is necessary, please contact
one of our service centres:
We offer fast, individual advice! You have
several options:
Abu Dhabi .........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brunei ................................................. 02 43 08 01
Bulgaria............................................... 02 73 94 88
Cambodia ........................................... 12 80 05 00
Canada ........................................1 88 87 77 02 11
Chile..................................................8 00 53 06 62
China ...........................................0 21 23 01 71 88
Colombia....................................01 80 07 00 66 24
Croatia ..............................................0 16 10 53 81
Czech Republic.................................2 33 03 27 27
Denmark ............................................. 35 25 86 00
Dubai ................................................0 43 96 64 33
Ecuador ..........................................18 00 10 10 00
Egypt.................................................0 23 33 41 11
Estonia.................................................. 6 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece............................................80 11 11 11 16
Hong Kong.......................................... 28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland .................................................. 5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 24 36 44 00
Ivory Coast.......................................... 05 02 02 59
Jordan...............................................0 64 39 86 42
Our online support on the Internet:
We can be reached any time, any place.
You are given 24 hour support on all as-
pects of our products. Here you will find an
interactive fault-finding system, a compila-
tion of the most frequently asked ques-
tions and answers, plus user guides and
current software updates to download.
When calling customer service, please
have ready your receipt and the phone
identity number (IMEI, to display press
#06#), the software version (to display,
*
press #06#, then select the Configuration
*
tab) and if available, your Siemens Service
customer number.
asked questions and answers in the sec-
tion entitled "Questions & Answers" in this
user guide on page 138.
You can also get personal advice about our
range of products on our Premium Hotline:
United Kingdom ............................ 0906 9597500
(0.75 £ per minute)
Qualified Siemens employees are waiting to
offer you expert information about our
products and installation.
In some countries repair and replace servic-
es are impossible where the products are
not sold through our authorised dealers.
Customer Care
143
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 70 07 07 00
Luxembourg.........................................43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman....................................................... 79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Peru ..................................................0 80 05 24 00
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar................................................... 04 32 20 10
Romania .........................................02 12 09 99 66
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 07 00 80
Singapore ........................................... 62 27 11 18
Slovak Republic ..............................02 59 68 22 66
Slovenia ............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand ............................................0 27 22 11 18
Tunisia ................................................ 71 86 19 02
Turkey..........................................0 21 64 59 98 98
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 66 03 86
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Venezuela....................................0 80 01 00 56 66
Vietnam...........................................84 89 20 24 64
Zimbabwe ........................................... 04 36 94 24
144
Care and maintenance
Care and maintenance
Your phone has been designed and manu-
factured to the highest of standards and
should be treated with great care. The sug-
gestions below will help you to enjoy your
phone for many years.
Battery quality statement
The capacity of your mobile phone battery
will reduce each time it is charged/emptied.
Storage at too high or low temperatures will
also result in a graduly capacity loss. As
a result the operating time of your mobile
phone may be considerably reduced, evan
after a rull recharge of the battery.
• Protect your phone from moisture and hu-
midity. Precipitation, humidity and liquids
contain minerals that will corrode electron-
ic circuits. Nevertheless, should your
phone become wet, disconnect it immedi-
ately from the power supply to avoid elec-
tric shock. Do not place your phone (even
to dry it) on/in a source of heat such as a
microwave oven, oven or radiator. The
phone may become overheated and
possibly explode.
• Do not use or store the phone in dusty,
dirty areas. Its moving parts may be
damaged and the casing may become
deformed and discoloured.
• Do not store your phone in hot environ-
ments (e.g. vehicle instrument panel in the
summer). High temperatures can shorten
the life of electronic devices, damage bat-
teries and warp or melt certain plastics.
• Do not store your phone in cold environ-
ments. When the phone warms up again
(to its normal ambient temperature), mois-
ture can form inside the phone, which may
damage electronic circuit boards.
Regardless of this, the battery has been de-
signed and manufactured so that it can be
recharged and used for six months after the
purchase of your mobile phone. After six
months, if the battery is clearly suffering from
loss of performance, we recommend that
your replace it. Please buy only Siemens
original batteries.
Display quality
declaration
For technological reasons, a few small dots
with different colours may appear in the dis-
play in exceptional cases.
Just remember that the appearance of
brighter or darker dots generally does not
mean that a fault has occurred.
• Do not drop, knock or shake your phone.
Rough handling can damage internal cir-
cuit boards!
• Do not use harsh chemicals, cleaning
solvents, or strong detergents to clean the
phone!
The suggestions given above apply equally
to your phone, battery, charger and all ac-
cessories. If any of these parts is not working
properly, obtain fast and reliable help at our
service centres.
Product data
145
Phone ID
Product data
You will need the following details if you
lose your phone or SIM card:
the number of the SIM card (on the card):
..............................................................
15 digit serial number of the phone
(under the battery):
..............................................................
the customer service number of the service
provider:
..............................................................
Declaration of conformity
BenQ Mobile hereby declares that the phone
described in this user guide is in compliance
with the essential requirements and other
relevant provisions of European Directive
1999/5/EC (R&TTE). The declaration of
conformity (DoC) concerned has been
signed. Please call the company hotline if
you require a copy of the original, or:
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to
prevent misuse.
Technical data
UMTS class:
Frequency range: 2 100 MHz
GSM class: 4 (2 watt)
Frequency range: 880 - 960 MHz
GSM class: 1 (1 watt)
Frequency range: 1 710 - 1 880 MHz
GSM class: 1 (1 watt)
Frequency range: 1 850 - 1 990 MHz
3 (0.25 watt)
Operating time
The operating time depends upon the re-
spective conditions of use: Extreme temper-
atures considerably reduce the phone’s
standby time. Avoid placing the phone in the
sun or on a heater.
Call time
• UMTS: up to 300 minutes
• GSM: up to 360 minutes
Standby time
Up to 400 hours
Weight:
Size:
134 g
111 × 53 × 20 mm
(108 ccm)
Action taken
Time Reduction of
(min) standby time by
Li-Ion battery:
1 000 mAh
Calling
1
1
1
30 - 90 minutes
50 minutes
Operating
Light *
temperature:
–10 °C… 55 °C
3.0/1.8 V
Network search
15 minutes
SIM card:
* Key input, games, organiser etc.
RSMultiMediaCard: max. 256 MB
146
SAR
SAR
European Union (RTTE) and
international (ICNIRP)
such as directly on the body. In this
case, the limits are met too.
As SAR is measured utilizing the de-
vice's highest transmitting power,
the actual SAR of this device while
operating is typically below that indi-
cated above. This is due to automatic
changes to the power level of the de-
vice to ensure it only uses the mini-
mum level required to reach the
network.
INFORMATION ON RF EXPOSURE /
SPECIFIC ABSORPTION RATE (SAR)
THIS MODEL MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO
RADIO WAVES
Your mobile device is a radio trans-
mitter and receiver. It is designed
not to exceed the limits for exposure
to radio waves recommended by in-
ternational guidelines. These guide-
lines were developed by the inde-
pendent scientific organization
ICNIRP and include safety margins
designed to assure the protection of
all persons, regardless of age and
health.
The World Health Organization has
stated that present scientific infor-
mation does not indicate the need
for any special precautions for the
use of mobile devices. They note
that if you nevertheless want to re-
duce your exposure then you can do
so by limiting the length of calls or
using a 'hands-free' device to keep
the mobile phone away from the
head and body.
The guidelines use a unit of meas-
urement known as the Specific Ab-
sorption Rate, or SAR. The SAR limit
for mobile devices is 2 W/kg and was
adopted into the European Standard
EN 50360 and into other national
standards. The CE mark demon-
strates that the EU requirements are
met.
Additional Information can be found
on the websites of the World Health
or Siemens
The highest SAR value for this device
when tested at the ear was
1
0,61 W/kg . As mobile devices offer a
range of functions, they can be used
in positions other than the head,
1 The tests are carried out in accordance
with international guidelines for testing.
Accessories
147
Accessories
Fashion & Carry
Handsfree Portable
Carrying Cases
Headset Basic HHS-500
A range of carry cases is available at spe-
cialist shops or you can visit the our online
shop at:
Simple headset without key to accept calls.
Headset HHS-510
Headset with key to accept and end calls.
Headset Purestyle HHS-610
Siemens Original Accessories
High quality headset with removable ear-
piece and key to accept calls.
Headset Stereo HHS-700
Stereo headset with key for listening to
music and making calls.
Energy
Li-Ion Battery EBA-750 (1000 mAh)
Spare battery
Headset Bluetooth®
HHB-700 with EU power supply unit
HHB-710 with UK power supply unit
HHB-720 with Australian power supply unit
Travel Charger
Travel Charger EU ETC-500
Travel Charger UK ETC-510
Elegant, small, easy to wear Bluetooth
headset.
Travel charger with an extended input
voltage range of 100 - 240 V.
Car Charger Plus ECC-600
Office
Charger for the cigarette lighter socket in the
car. It is possible to make phone calls during
charging.
Data Cable USB DCA-540
For connecting the phone to the USB port of
the PC. With charging capacity.
148
Accessories
Multitainment
Car Solutions
Flash IFL-600
Car Kit Portable HKP-500
Plug-in flash module for taking photos in are-
as with low ambient light.
The portable handsfree car kit can easily be
moved from one car to another. Simply plug
into the cigarette lighter socket, connect and
talk.
Mobile Music Set IMS-700
The portable Mobile Music Set allows users
to listen to music on the mobile phone in ex-
cellent sound quality anywhere and share it
with others via active loudspeakers.
Car Kit Bluetooth® Portable HKW-700
Bluetooth high-tech handsfree kit without ca-
ble connection to the mobile phone. Plugs
into cigarette lighter socket - no installation
effort required.
Car Kit Bluetooth® 75 HKW-710
Innovative Bluetooth handsfree kit with
external display for safe and comfortable
calling in the car.
The products are available at specialist
shops or you may visit our online shop at:
Siemens Original Accessories
Guarantee certificate (UK)
149
Guarantee certificate (UK)
Without prejudice to any claim the user
(customer) may have in relation to the dealer
or retailer, the customer shall be granted a
manufacturer's Guarantee under the
conditions set out below:
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee
default becoming evident.
• Ownership of devices or components
replaced by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For
Products sold in the United Kingdom the
Guarantee is issued by Siemens plc,
Siemens House, Oldbury, Bracknell,
Berkshire, RG12 8FZ.
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer's liability for death or personal in-
jury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
• In the case of new devices and their com-
ponents exhibiting defects resulting from
manufacturing and/or material faults within
24 months of purchase, Siemens shall, at
its own option and free of charge, either re-
place the device with another device re-
flecting the current state of the art, or
repair the said device. In respect of parts
subject to wear and tear (including but not
limited to, batteries, keypads, casings,
small parts on casings, protective cover-
ings where included in the scope of deliv-
ery), this warranty shall be valid for six
months from the date of purchase.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper
treatment and/or failure to comply with in-
formation contained in the user manuals.
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
To invoke this Guarantee, please contact
our online support on the Internet
mobilephonescustomercare or the
Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
150
Guarantee certificate (IRL)
Guarantee certificate (IRL)
Without prejudice to any claim the user (cus-
tomer) may have in relation to the dealer or
retailer, the customer shall be granted a
manufacturer’s Guarantee under the condi-
tions set out below:
• In the case of new devices and their compo-
nents exhibiting defects resulting from manu-
facturing and/or material faults within
24 months of purchase, Siemens shall, at its
own option and free of charge, either replace
the device with another device reflecting the
current state of the art, or repair the said de-
vice. In respect of parts subject to wear and
tear (including but not limited to, batteries,
keypads, casings, small parts on casings,
protective coverings where included in the
scope of delivery), this warranty shall be valid
for six months from the date of purchase.
• This Guarantee shall be invalid if the de-
vice defect is attributable to improper care
or use and/or failure to comply with infor-
mation contained in the user manuals.
• In particular claims under the Guarantee
cannot be made if:
• This Guarantee shall not apply to or ex-
tend to services performed by the author-
ised dealer or the customer themselves
(e.g. installation, configuration, software
downloads). User manuals and any soft-
ware supplied on a separate data medium
shall be excluded from the Guarantee.
• The purchase receipt, together with the
date of purchase, shall be required as evi-
dence for invoking the Guarantee. Claims
under the Guarantee must be submitted
within two months of the Guarantee de-
fault becoming evident.
• Ownership of devices or components re-
placed by and returned to Siemens shall
vest in Siemens.
• This Guarantee shall apply to new devices
purchased in the European Union. For Prod-
ucts sold in the Republic of Ireland the Guar-
antee is issued by Siemens Ireland Limited,
Ballymoss Road, Sandyford Industrial Es-
tate, Dublin 18 - The Republic of Ireland.
• Any other claims resulting out of or in con-
nection with the device shall be excluded
from this Guarantee. Nothing in this Guar-
antee shall attempt to limit or exclude a
Customers Statutory Rights, nor the man-
ufacturer’s liability for death or personal in-
jury resulting from its negligence.
• The duration of the Guarantee shall not be
extended by services rendered under the
terms of the Guarantee.
• Insofar as no Guarantee default exists,
Siemens reserves the right to charge the
customer for replacement or repair.
•
•
•
The device is opened (this is classed
as third party intervention)
Repairs or other work done by persons
not authorised by Siemens.
Components on the printed circuit
board are manipulated
•
•
The software is manipulated
Defects or damage caused by drop-
ping, breaking, lightning or ingress of
moisture. This also applies if defects or
damage was caused by mechanical,
chemical, radio interference or thermal
factors (e.g.: microwave, sauna etc.)
•
Devices fitted with accessories not au-
thorised by Siemens.
Guarantee certificate (IRL)
151
• The above provisions does not imply a
change in the burden of proof to the detri-
ment of the customer.
To invoke this Guarantee, please contact
our online support on the Internet
the Siemens telephone service. The relevant
number is to be found in the accompanying
user guide.
152
License Agreement
License Agreement
This License Agreement ("Agreement") is
between You and Siemens Aktiengesellschaft,
Germany (“Siemens”). The Agreement author-
izes You to use the Licensed Software, spec-
ified in Clause 1 below, which may be included
in your phone, stored on a CD-ROM, sent to
You by electronic mail or over the air, down-
loaded from Siemens Web pages or servers
or from other sources under the terms and
conditions set forth below.
2. COPYRIGHT. The Licensed Software
and all related rights, without limitation in-
cluding proprietary rights therein, are owned
by Siemens, its Licensors or affiliates and are
protected by international treaty provisions
and all applicable national laws. This Agree-
ment does not convey to You nor allow You
to acquire any title or ownership interest in
the Licensed Software or rights therein. The
structure, organization, data and code of the
Licensed Software are the valuable trade se-
crets and confidential information of Siemens,
its Licensors or affiliates. You must reproduce
and include the copyright notices with any
permitted copies You make of the Licensed
Software.
3. LICENSE AND USE. Siemens grants to
You a non-exclusive, non-transferable end
user right to install the Licensed Software or
use the Licensed Software installed on the
phone. The Licensed Software is licensed
with the phone as a single integrated product
and may be used with the phone only as set
forth in these licensing terms.
4. LIMITATIONS ON LICENSE. You may
not copy, distribute, or make derivative works
of the Licensed Software except as follows:
(a) You may make one copy of the Licensed
Software, excluding the documentation, as
an archival backup copy of the original. Any
other copies You make of the Licensed Soft-
ware are in violation of this Agreement.
(b) You may not use, modify, or transfer
the right to use the Licensed Software other
than together with the accompanying hard-
ware or copy the Licensed Soft-ware except
as expressly provided in this Agreement.
(c) You may not sublicense, rent or lease
the Licensed Software.
Read this Agreement carefully before using
your phone. By using your phone or installing,
copying, and/or using the Licensed Software,
You acknowledge that You have read and
understood the Agreement and agree to be
bound by all of the terms and conditions stated
below. You further agree that if Siemens or any
licensor of Siemens ("Licensor") is required to
engage in any proceeding, legal or otherwise,
to enforce their rights under this Agreement,
Siemens and/or its Licensor shall be entitled
to recover from You, in addition to any other
sums due, reasonable attorney's fees, costs
and disbursements. If You do not agree to all
of the terms and conditions of this Agreement,
do not install or use the Licensed Software.
This Agreement governs any Updates, releas-
es, revisions, or enhancements to the Licensed
Software.
1. LICENSEDSOFTWARE. As used in this
Agreement, the term "Licensed Software"
means collectively: all the software in Your
phone, all of the contents of the disk(s),
CD-ROM(s), electronic mail and its file attach-
ments, or other media with which this Agree-
ment is provided and includes any related
Siemens or third party software and upgrades,
modified versions, updates, additions and cop-
ies of the Licensed Software, if any, distributed
over the air, downloaded from Siemens Web
pages or servers or from other sources.
License Agreement
153
(d) You may not reverse engineer, decom-
pile, modify, or disassemble those Licensed
Software programs except and only to the ex-
tent that such activity is ex-pressly permitted by
applicable law notwithstanding this limitation.
Parts of the Licensed Software may be sup-
plied by third parties and may be subject to
separate license terms. Such terms are set
out within the documentation.
BILITY OR FITNESS FOR A PARTICULAR
PURPOSE OR THAT THE LICENSED
SOFTWARE WILL NOT INFRINGE ANY
THIRD PARTY PATENTS, COPYRIGHTS,
TRADEMARKS OR OTHER RIGHTS.
THERE IS NO WARRANTY BY SIEMENS
OR ITS LICENSORS OR BY ANY OTHER
PARTY THAT THE FUNCTIONS CON-
TAINED IN THE LICENSED SOFTWARE
WILL MEET YOUR REQUIREMENTS OR
THAT THE OPERATION OF THE LICENSED
SOFTWARE WILL BE UNINTERRUPTED
OR ERROR-FREE AND SIEMENS AND ITS
LICENSORS HEREBY DISCLAIM ANY AND
ALL LIABILITY ON ACCOUNT THEREOF.
NO ORAL OR WRITTEN INFORMATION OR
ADVICE GIVEN BY A SIEMENS REPRE-
SENTATIVESHALLCREATEAWARRANTY
OR IN ANY WAY AFFECT THIS DISCLAIM-
ER. YOU ASSUME ALL RESPONSIBILITY
TO ACHIEVE YOUR INTENDED RESULTS
AND FOR THE INSTALLATION, USE, AND
RESULTS OBTAINED FROM IT.
5. MISUSE OF THE LICENSED SOFT-
WARE OR DATA GENERATED BY THE LI-
CENSED SOFTWARE IS STRICTLY
PROHIBITED BY SIEMENS, MAY VIOLATE
GERMAN, U.S. AND OTHER LAWS AND
MAY SUBJECT YOU TO SUBSTANTIAL
LIABILITY. You are solely responsible for
any misuse of the Licensed Software under
this Agreement and for any liability or damage
related in any way to your use of the Licensed
Software in violation of this Agreement. You
are also responsible for using the Licensed
Software in accordance with the limitations
of this Agreement.
6. TERMINATION. This Agreement is ef-
fective from the first date You install, copy or
otherwise use the Licensed Software. You
may terminate this license at any time by
deleting or destroying the Licensed Software,
all back up copies and all related materials
provided to You by Siemens. Your license
rights terminate automati-cally and immediate-
lywithout notice if You fail to comply with any
provision of this Agreement. The rights and
obligations under sections 2, 5, 6, 7, 9, 12
and 13 of this Agreement shall survive the
termination of this Agreement.
8. NO OTHER OBLIGATIONS. This Agree-
ment creates no obligations on the part of
Siemens other than as specifically set forth
herein.
9. LIMITATION OF LIABILITY. IN NO
EVENT SHALL SIEMENS, ITS EMPLOYEES,
LICENSORS, AFFILIATES OR AGENTS BE
LIABLE FOR ANY DIRECT DAMAGES,
LOST PROFITS, DATA OR BUSINESS, OR
COSTS OF PROCUREMENT OF SUBSTI-
TUTE GOODS OR SERVICES, PROPERTY
DAMAGE, INTERRUPTION OF BUSINESS
OR FOR ANY SPECIAL, INDIRECT, INCI-
DENTAL, EXEMPLARY, ECONOMIC, PU-
NITIVE OR CONSEQUENTIAL DAMAGES,
HOWEVER CAUSED, AND WHETHER
ARISING UNDER CONTRACT, TORT,
NEGLIGENCE, OR OTHER THEORY OF
LIABILITY, OR ARISING OUT OF THE USE
OF OR INABILITY TO USE THE LICENSED
SOFTWARE, EVEN IF SIEMENS IS AD-
7. YOUACKNOWLEDGE THE LICENSED
SOFTWARE IS PROVIDED "AS IS" AND
NEITHER SIEMENS NOR ANY OF ITS
LICENSORS MAKE ANY REPRESENTA-
TIONS OR WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING BUT NOT LIMITED
TO THE WARRANTIES OF MERCHANTA-
154
License Agreement
VISED OF THE POSSIBILITY OF SUCH
DAMAGES. THE LIMITATION OF LIABILITY
SHALL NOT APPLY IF AND TO THE EX-
TENT SIEMENS´LIABILITYISMANDATORY
UNDER THE APPLICABLE LAW E.G.
ACCORDING TO PRODUCT LIABILITY
LAW OR IN THE EVENT OF INTENTIONAL
MISCONDUCT, PERSONAL INJURY OR
DEATH.
10. TECHNICAL SUPPORT. Siemens has
and its Licensors have no obligation to furnish
You with technical support unless separately
agreed in writing between You and Siemens
or the applicable Licensor.
Siemens and where applicable its Licensors
in the Licensed Software shall be free to use
any feedback received from You resulting
from your access to and use of the Licensed
Software for any purpose including (without
limitation) the manufacture, marketing and
maintenance or support of products and
services.
11. EXPORT CONTROL. The Licensed
Software may include technical data and cryp-
tographic software and is subject to German,
European Union and U.S. export controls
and may be subject to import or export con-
trols in other countries. You agree to strictly
comply with all applicable import and export
laws and regulations. Specifically, You agree,
to the extent required by U.S. Export Admin-
istration Regulations, that You shall not dis-
close or otherwise export or re-export the
Licensed Software or any part thereof deliv-
ered under this Agreement to (a) Cuba, Iran,
Iraq, Libya, North Korea, Sudan, Syria or any
other country (including a national or resident
of such country) to which the U.S. has
restricted or prohibited the export of goods
or services.
12. APPLICABLE LAW AND FORUM.
The laws of Germany govern this Agreement.
No choice of law rules of any jurisdiction
will apply. The courts in Munich shall settle
any disputes arising out of or relating to this
Agreement provided you are a merchant.
13. MISCELLANEOUS. This Agreement
represents the entire agreement between
You and Siemens relating to the Licensed
Software and (i) supersedes all prior or con-
temporaneous oral or written communica-
tions, proposals, and representations with
respect to its subject matter; and (ii) prevails
over any conflicting or additional terms of
any acknowledgement or similar communi-
cation between the parties during the term of
this License. Notwithstanding the foregoing,
some products of Siemens may require You
to agree to additional terms through an on-
line "click-wrap" license, and such terms
shall supplement this Agreement. If any pro-
vision of this Agreement is held invalid, all
other provisions shall remain valid unless
such validity would frustrate the purpose of
this Agreement, and this Agreement shall be
en-forced to the full extent allowable under
applicable law. No modification to this Agree-
ment is binding, unless in writing and signed
by a duly authorized representative of each
party. This Agreement shall be binding on
and shall inure to the benefit of the heirs,
successors, and assigns of the parties hereto.
The failure of either party to enforce any right
resulting from the breach of any provision of
this Agreement by the other party will not be
deemed a waiver of any right related to a
subsequent breach of such provision or any
other right hereunder. Notwithstanding
anything to the contrary in this Agreement,
Siemens and/or its licensors may enforce its
rights, including but not limited to copyright,
trademark or trade names, in accordance
with the rules of law in each country.
Menu tree
155
Menu tree
Contacts
Call records
>
Internet
Enter URL
Bookmarks list
History
>
>
Browser settings
Multimedia
Look and feel
Security
Camera
Certificates
WAP push
Browser profiles
>
Messages
Create message
Inbox
SMS
MMS
E-mail
Drafts
Sent messages
>
>
>
Instant messaging
Voicemail
My online status
Settings
Privacy settings
>
My details
Watcher list
Private list
Block list
Add notifications
Alerts
Templates
Text templates
MMS templates
Sounds
Server
156
Menu tree
>
>
>
>
Messages
Message settings
SMS settings
SMS profiles
Auto header
Auto signature
Autosave sent
Auto SMS delete
Emoticons
Text size
MMS settings
E-mail
MMS profiles
Retrieval mode
Validity period
Hide number
Anon. messages
Req. read report
Req. deliv report
Allow read report
Allow deliv report
Delivery time
Creation mode
Auto signature
Autosave sent
Allow adverts
Emoticons
Text size
Max msg size
Menu tree
157
>
>
>
>
Messages
Organiser
Message settings
Media album
Cell broadcast
Rec. broadcasts
Cell info display
Topic list
>
Voicemail
Voicemail no.:
Vmail notific.
Instant messaging
Calendar
Dictat. machine
Time zones
Synchronisation
Games
Media player
Video
telephony
>
>
Extras
SIM toolkit
Alarm clock
FM radio
Calculator
Unit converter
Sound recorder
Stopwatch
My stuff
Settings
Profiles
>
Ringtones
Volume
>
>
>
Voice calls
Melody
Tone
Video calls
Messaging
Melody
Tone
Melody
SMS & MMS tone
CBS alert tone
E-mail tone
158
Menu tree
>
>
>
>
>
>
Settings
Ringtones
Themes
Calendar
Melody
Tone
Alarm clock
Melody
Tone
Inst.msg sounds
Game sounds
Startup sound
Shutdown sound
Display
Logo
Screensaver
Startup animation
Shutdown anim.
Greeting message
Backlight time
Brightness
Power save
Vibration
Off
Standard
Helicopter
UFO
Shock
Mosquito
Train
Menu tree
159
>
>
>
Settings
Connectivity
IrDA
IrDA active
File location
>
Bluetooth
Bluetooth active
Data counter
Connect'n profiles
Internet profiles
Linger time
File location
Search
Known devices
Last connected
My BT name
Bluetooth visibility
>
Shortcuts
Left soft key
Right soft key
Navigation key
>
>
>
Up
Down
Left
Right
Number keys
Key 1
...
Key 9
>
Call setup
Hide ID
Call waiting
Diverts
All calls
Any key answer
Auto volume
Unanswered
Not reachable
No reply
Busy
Fax
Data
Status check
Clear all
160
Menu tree
>
>
>
>
>
Settings
Call setup
Phone
Video calls
Show my image
Select image
Language
Display language
Input language
T9 mode
Key tones
Info tones
Voice dialling
File system
Phone identity
Device manager
Master reset
>
Format card
Eject card
Memory assistant
>
>
Clock
Time
Date
Time zone
Time format
Date format
Show clock
Auto time
Security
Auto key lock
Only
>
PIN codes
This SIM only
PIN control
Change PIN
Change PIN2
Change phonecde
Menu tree
161
>
>
>
>
Settings
Security
Barrings
All outgoing
Content downl'd ?
Content expiry
Outg. internat.
Outg. int. x home
All incoming
When roaming
Status check
Clear all
Network
Select line
Network info
Choose network
Auto network
Preferred network
Mode selection
Fast search
>
>
>
Accessories
Car kit
Edit profile
Auto answer
Accept by voice
Announce caller
Car loudspeaker
Auto off
Read SMS
Key assignments
Headset
Edit profile
Charge via USB
Auto answer
162
Index
A
Any key answer.................................123
Auto key lock.................................... 130
Car kit settings ................................. 134
Control code (DTMF) .......................... 36
Create messages ................................ 52
Currency converter........................... 102
Customer Care.................................. 142
B
Battery
Insert.............................................. 10
Bookmark
WAP ............................................... 87
Browser .............................................. 87
C
Calculator ......................................... 102
Call
Hold ............................................... 32
Menu ............................................. 34
Mute .............................................. 34
Reject............................................. 32
D
Divert calls........................................ 121
Download........................................... 91
DTMF tones (tone sequences) ............. 36
Settings ....................................... 135
Internet.............................................. 87
Games ........................................... 93
IrDA ................................................. 116
E
E-mail
Retrieve/read .................................. 61
Settings.......................................... 71
Key lock ............................................... 7
Line.................................................. 132
Linger time....................................... 119
Logo ................................................ 113
Lost of phone, SIM card .................... 145
F
Fast network search..........................133
File system........................................ 124
G
My Stuff ....................................... 109
GPRS................................................. 118
Greeting message............................. 115
Guarantee certificate ........................ 149
164
M
Videos.......................................... 106
Message
SMS................................................ 52
MMS
Security settings........................... 130
Phone identity number (IMEI) ........... 125
Preventing accidental activation ......... 25
Product data..................................... 145
Multitainment................................... 148
Music ............................................... 105
R
Redial................................................. 31
Remote sync....................................... 97
N
Line..............................................132
No connection.............................. 139
Preferred ...................................... 133
Select band .................................. 133
Text entry
S
This SIM only on/off.......................... 130
Time format ..................................... 128
Security
Short cuts ......................................... 120
Show clock on/off ............................. 129
SIM card
User guide symbols ............................ 18
Video
Clear barring................................... 25
SMS
Receive........................................... 58
Sounds
Stopwatch ........................................ 104
Swap calls........................................... 32
Switch on/off phone ........................... 14
Activate ......................................... 45
W
Read/load....................................... 65
Receive .......................................... 59
Settings ......................................... 89
Wildcard............................................. 39
T
T9
Task switching .................................... 23
Key................................................... 6
Technical data .................................. 145
Templates........................................... 29
|