s
Be inspired
Issued by
Information and Communication mobile
Haidenauplatz 1
D-81667 Munich
© Siemens AG 2003
All rights reserved. Subject to availability.
Rights of modification reserved.
Siemens Aktiengesellschaft
Ref.No.: A31008-H6850-A101-1-7619
*A5B00075103055*
ST55
ts
Safety precautions ..................... 3
Overview of the phone .............. 5
Dialling with number keys ...... 15
Multiparty .............................. 18
Call menu .............................. 19
Control codes (DTMF) ............. 19
My photos ..............................30
Settings ..................................31
Surf & Fun .................................32
o In-
he
this
uide
Messages (SMS) .....................36
Read new SMS .......................38
Lists .......................................38
See also Index at the end of this User Guide
2
Voice recording ......................67
Customer Care ..........................69
Questions & Answers ................71
Care and maintenance .............74
Accessories ...............................76
Battery quality statement ........77
SAR – European Union (RTTE) ...81
SAR – International (ICNIRP) .....83
Index .........................................84
Receive/read e-mail ................ 45
Email setup ............................ 46
Voice msg./mailbox .................. 48
Network ................................. 54
Connectivity ........................... 55
Divert ....................................... 57
Barrings .................................... 59
Closed user group .................... 60
Fast access key ......................... 61
Clock ..................................... 64
Calculation ............................. 65
Voice control .......................... 66
See also Index at the end of this User Guide
3
Safety precautions
Information for parents
Please read the operating instructions and safety precautions carefully before use.
Explain the content and the hazards associated with using the phone to your children.
ons
Remember to comply with legal
requirements and local
The ringtone (p. 50) and info
tones are reproduced through
the loudspeaker. Do not hold the
phone to your ear when it rings.
Otherwise you risk serious
permanent damage to your
hearing.
restrictions when using the
phone. For example in
aeroplanes, petrol stations,
hospitals or while driving.
Mobile phones can interfere
with the functioning of medical
devices such as hearing aids
or pacemakers. Keep at least
20 cm/9 inches between phone
and pacemaker. When using
the mobile phone hold it to the
ear which is further away from
the pacemaker. For more
Only use original Siemens
batteries (100% mercury-free)
and charging devices.
Otherwise you risk serious
damage to health and property:
The battery could explode, for
instance.
Do not open the phone. Only the
battery (100 % mercury-free) or
SIM card may be changed.
You must not open the battery
under any circumstances.
Any other changes to this device
are strictly prohibited and will
invalidate the operating licence.
information consult your doctor.
The SIM card may be removed.
Caution! Small parts like this
could be swallowed by young
children.
The mains voltage specified on
the power supply unit (volt) must
not be exceeded. Otherwise the
power supply unit may be
destroyed.
4
Safety precautions
Important:
Please dispose of unwanted
batteries and phones as
permitted by the laws in your
country.
The phone may cause
interference in the vicinity of
TV sets, radios and PCs.
Use only Siemens original
accessories. This will avoid
potential risks to health or
property and ensure compliance
with all relevant regulations.
Improper use will invalidate the guarantee!
5
Overview of the phone
w of c Integrated antenna
e
Do not interfere with the phone above the
battery cover unnecessarily. This reduces
the signal quality.
d Loudspeaker
e Display
f Joystick
In standby mode:
Hold down – voice control.
G
G
Press briefly – voice menu.
Open contacts.
Function as for soft keys.
Open menu.
H
F
C
In lists and menus:
I
Scroll up and down.
Back a menu level.
D
E/ C Select a function.
During a call:
G
Increase volume.
Reduce volume.
Function as for left soft key.
H
D
E/ C Open call menu.
g Microphone
h Connection socket
For charger, headset etc.
Note
Your phone's display and the camera lens on the back of the phone are delivered with a
protective film.
Remove this film before getting started.
In rare cases static discharge may cause discoloration at the edges of the display. However
this will disappear within 10 minutes.
6
Overview of the phone
c Soft keys
The current functions of these keys are
shown in the bottom line of the display as
§text§/symbol.
d
Call key
B
Dial phone number/name displayed, take
calls. Show last phone numbers dialled in
standby mode.
A
e
On/Off/End key
• Switched off: hold down to switch on.
• During a conversation or in an application:
press briefly to finish.
• In menus: press briefly to go back a level.
Hold down to go back to standby mode.
• In standby mode: hold down to switch off
phone.
f Input keys
Numbers, letters.
*
g
Hold down
• In standby mode: switch all signal tones
on/off (except alarm).
• During call: switch mute on/off.
#
h
Hold down
In standby mode: switch key lock on/off.
Activating the keypad lock also avoids
connecting to the Internet unintentionally by
double clicking on the joystick.
7
Display symbols (selection)
Menu symbols
Contacts
Ringtone only if the caller is stored
in contacts or as a group member.
n)
Alarm clock active.
Key lock active.
Records
Phone numbers/names:
On the SIM card.
SIM services
or
Profiles
On the SIM card (PIN2 protected).
Contacts (in phone).
Text input with T9.
Messages
Camera
Registered.
Internet online.
Headset active.
Auto answer feature on.
Internet
Soft keys
Explorer
Organizer
Message received.
Voice message received.
MMS received: logo.
MMS received: ringtone.
MMS received: caller ID.
Missed call.
Settings
Display symbols
Missed appointment.
Missed alarm.
Signal strength.
Battery charging status,
e.g., 100 %.
Open contacts.
All calls are diverted.
Ringer off.
Message memory full.
8
Getting started
Insert SIM card/battery
The service provider supplies you
with a SIM card on which all the
important data for your line is
stored. If the SIM card has been
delivered in credit-card size, snap the
smaller segment out and remove
any rough edges.
p
• Insert the lugs into the openings
, then press the battery onto the
q
phone until it clicks into position.
• Push the catch in the direction of
the arrow n.
q
n
• Remove the cover with the
Additional information
Please switch off your phone before
removing the battery!
integrated battery
.
o
o
Only 3V SIM cards are supported. Please
contact your service provider if you have an
older card.
SIM card problems ............................p. 71
Functions without SIM
• Insert the SIM card in the opening
with the contact area facing
downwards and push gently until it
engages below the holder (make
sure the angled corner is in the
correct position) p.
Emergency number (SOS)
§SOS§
Press the soft key to make an
emergency call on the network
without a SIM card and without
entering a PIN (not available in
all countries). Only to be used
in real emergencies!
§Menu§
Press soft key. The functions are
displayed.
9
Getting started
Charge icon not visible
Charge battery
If the battery has been discharged
fully the charge icon is not
immediately visible when the
charger is plugged in. It will appear
after up to 2 hours. In this case the
battery is fully charged after 3-4
hours.
The battery is not fully charged
when delivered. Plug charger cable
into the bottom of the phone n,
plug the charger cable into a mains
power socket and charge for at least
2.5 hours.
Please only use the power supply unit
provided!
o
n
Display while in service
Charge level display during
operation (empty-full):
A beep sounds when the battery is
o
nearly empty. The charge level of the
battery is only displayed correctly
after an uninterrupted charging/
discharging cycle. You should
therefore not remove the battery
unnecessarily and where possible not
finish the charging process early.
To remove, push the buttons on the
side of the connector in the direction
of the arrows
.
o
Charging time
An empty battery is fully charged
after about 2.5 hours. Charging is
only possible within a temperature
range of +5 °C to +40 °C. The mains
voltage specified on the power
supply unit must not be exceeded.
Additional information
The charger heats up when used for long
periods. This is normal and not dangerous.
Operating time
A full battery will deliver up to
140 hours of standby time or
270 minutes of talktime (p. 75).
10
Switch on, off/PIN entry
n,
Switch on/off
Copy SIM addresses
ntry A
Hold down On/Off/End key
You can copy entries from the SIM
card into the phone (contacts).
Please do not interrupt this procedure.
During this time do not accept
incoming calls. Follow instructions in
the display.
to switch on or off.
Enter PIN
The SIM card can be protected with a
4 to 8-digit PIN.
You can also copy data from the SIM
card at a later time: Copy all function
(options menu for SIM entries, p. 25).
Enter the PIN using the
J
number keys. The
characters
appear to
****
ensure nobody can read
your PIN on the display.
Correct errors with §Clear§.
Standby mode
When the name of the service
provider appears on the display, the
phone is in standby mode and ready for
use.
§OK§
Confirm entry with right
soft key. Logging on to the
network will take a few
seconds.
Additional information
Change PIN ......................................p. 13
Other network (roaming) ...................p. 55
Clear SIM card barring......................p. 13
Signal strength
Strong receive signal.
A weak signal reduces the
call quality and may lead to
loss of the connection.
Change your location.
The right soft key may have different
functions pre-assigned (p. 61).
Hold down the On/Off/End
A
key to return to standby
mode from any situation.
11
General instructions
This corresponds to:
User guide
ons
The following symbols are used to
explain operation:
n
Enter numbers or letters.
J
On/Off/End key
A
Call key
B
<>
Soft keys
Press the joystick, e.g., to
C
call up the menu.
C
From standby mode click
on the joystick to open the
menu.
Press the joystick in the
direction indicated.
DFE
H I G
Displays a soft-key function.
o
§Select§
Function depends on the
L
service provider, special
registration may be
necessary.
Menu controls
The steps needed to reach a function
are shown in a condensed form in this
user guide, e.g. to call up messages
and from there call up SMS:
D
Use the joystick to select
the menu item "Messages"
and confirm by clicking on
the joystick.
CMMessagesMSMS
C
A further click on the
joystick selects "New SMS".
12
General instructions
Menu speed dialling
Codes
All menu functions are numbered
internally. A function may be
selected directly by entering these
numbers in sequence.
The phone and SIM card are
protected against misuse by several
security codes.
Keep these confidential numbers in a
safe place where you can access
them again if required.
E.g., write new SMS (from standby
mode):
Press for menu view.
C
PIN
Protects your SIM card
(personal identification
number).
4
1
1
for Messages
PIN2
For setting the charge detail
display and to access additional
functions on special SIM cards.
for SMS
for New SMS
PUK
PUK2
Key code for unlocking SIM
cards after the wrong PIN has
been entered repeatedly.
Phone
code
Protects your phone. Must be
entered at the first security
setting.
CMSettingsMSecurity MCodes
MSelect function.
PIN control
The PIN is usually requested each
time the phone is switched on. You
can deactivate this feature but you
risk unauthorised use of the phone.
Some service providers do not
permit deactivating the control.
13
General instructions
§Edit§
Press.
Clear SIM card barring
Enter PIN.
If the PIN is entered incorrectly three
J
times, the SIM card is barred. Enter
the PUK (MASTER PIN), provided
with the SIM card by your service
provider, according to instructions. If
the PUK (MASTER PIN) has been lost,
please contact your service provider.
§OK§
§Edit§
§OK§
Confirm input.
Press.
Confirm.
Change PIN
You can change the PIN to any 4 to 8-
digit number you find easier to
remember.
Additional information
Keylock..............................................p. 52
Further security settings....................p. 54
Enter current PIN.
J
Preventing accidental
activation
Even if PIN entry is deactivated,
confirmation is required to switch on
the phone.
§OK§
J
J
Press.
§OK§ Enter new PIN.
§OK§ Repeat new PIN.
,
,
This prevents the phone from being
switched on accidentally, e. g.,
when carried in a pocket or whilst
you are on an aircraft.
Change PIN2
(Display only if PIN2 is available).
Proceed as with Change PIN.
Chg. phonecode
L
Press down.
A
§OK§
You define and enter the phone
code (4-8 digits) when you call up a
phone-code protected function for
the first time. It is then valid for all
phone-code protected functions.
Following the third unsuccessful
attempt, access to the phone code
and the functions that use it is
denied. If this happens please
Press. The phone switches
on.
contact Siemens Service (p. 69).
14
General instructions
L
SIM services
(optional)
Your service provider may offer
special applications such as mobile
banking, share prices, etc. via the
SIM card. To do this you need an
appropriate SIM card. Where there
are several applications, these are
displayed in a SIM services menu.
With the SIM services menu, your
phone is ready to support future
additions in your service provider's
user package. For further
information, please contact your
service provider.
If your SIM card does not offer this
function, this menu item will be
Settings" which will give you direct
access to all the audio settings for
your phone (p. 50).
15
Calling
Dialling with number
keys
End call
Press the End key briefly.
A
The call is ended. Press this
key even if the person on
the other end of the line
has hung up first.
The phone must be switched on
(standby mode).
Enter number (always with
J
area code, if necessary
with international dialling
code).
Set volume
Use the joystick (top/
§Clear§
A short press clears the last
digit, a long press clears the
entire phone number.
I
bottom) to adjust the
volume (only possible
during conversation).
Press Call key. The
displayed phone number is
dialled.
B
Redial previous numbers
Additional information
called:
§Save§ Save phone number in contacts/
to SIM card...............................p. 23/p. 25
Press the Call key twice.
§Menu§ Call menu.............................p. 19
Microphone off ..................................p. 19
Auto key lock.....................................p. 52
Control codes (DTMF) ......................p. 19
Voice dialing......................................p. 66
International dialling codes
To redial other numbers that were
dialled previously:
Press the Call key once.
I
Pick out the required
phone number from the
list, then press the ...
In standby mode:
B
... key.
Hold down until a “+” is
displayed.
0
§+List§
Press and select country.
Phone number memo
You can use the keypad to enter a phone
number during a conversation. The person
to whom you are speaking can hear these
entries. When the connection has ended
you can save or dial the phone number.
16
Calling
If the number is busy
Accept call
If the called number is busy or
cannot be reached because of
network problems several options
are available (depending on the
service provider). An incoming call
or any other use of the phone
interrupts these functions.
The phone must be switched on
(standby mode). An incoming call
will interrupt any other use of the
phone.
§Answer§ Press.
Or
Either
B
Press.
If the phone number has been
Auto redial
§Auto§
transmitted by the network, it is
displayed. If the name is in contacts
the relevant name appears instead.
Press. The phone number
is automatically dialled ten
times at increasing
time intervals. End with:
Warning!
AEnd key.
Please make sure you have accepted the
call before holding the phone to your ear.
This will avoid damage to your hearing from
loud ringtones!
Or
Reminder
Additional information
§Prompt§ Press. A beep reminds you
to redial the displayed
phone number after 15
minutes.
Missed calls.......................................p. 27
Accept call using any key ..................p. 53
Switch off ringtone.............................p. 50
Reject call
§Reject§ Press. The call will be
diverted if this has been
set previously (p. 57).
Or
A
Press briefly.
17
Calling
During a call, you may be advised
that there is another call waiting.
L
Swapping calls
You will hear a special tone during
the call. You have the following
options:
Establish a second connection
You can call another number during
a call.
Accept the waiting call in addition to
the first
§Hold§
The current call is put on
hold.
Accept the waiting call,
putting the current call on
hold to do so. Always
B
Now dial the new phone
number.
J
proceed as above to swap
between the two calls.
Press. The number is
dialled.
B
(Swap)
Reject the waiting call
§Reject§ Reject the waiting call.
Swap back and forth
between the calls.
Accept the waiting call and end the
current call
End current call
End the current call.
A
End the current call.
A
§Answer§ Accept new call.
§Return§ You are now connected to
the caller.
Incoming calls during a call
You may need to register for this
service with your service provider
and set your phone accordingly.
18
Calling
Multiparty menu
L
Multiparty
§Menu§
Open the menu
Call up to 5 parties one by one and
link them together in a multiparty
call. Some of the functions described
may not be supported by your
service provider or may have to be
enabled specially. Once you have
established a connection:
Join all All held calls are joined for
the multiparty conversation.
Hold all All active calls are held.
Transfer The original call is joined to
the second one. For you,
both calls are now ended.
§Hold§
The current call is put on
hold.
End all
End
All active calls are ended.
/
Now dial a new number.
When the new connection
is established ...
J
All calls in the multiparty
conversation are ended
when the End key is
pressed.
A
§Menu§
... open menu and select
Multiparty. The held calls
are joined for the
multiparty conversation.
19
Calling
Call menu
Control codes (DTMF)
The following functions are only
available during a call:
Send control code
You can, for example, enter control
codes (numbers) for remote access
to an automatic answering machine
while another connection exists.
These entries are transmitted
directly as DTMF codes (control
codes).
§Menu§
Voice memo
Starts the voice recording.
Open menu.
Mute
Switch microphone on/off.
If switched off, the person
on the other end of the
line cannot hear you
(muting).
Enter DTMF control code.
J
B
Send.
Loudspeaker
Activate/deactivate.
Store in contacts
Volume Adjust volume during a
Store phone numbers and control
codes (DTMF codes) in the same
way as a normal entry.
call.
Multiparty See Multiparty menu above.
Enter phone number.
J
0
phone number.
Press until a “+” appears in
Messages An SMS can be sent
the display (wait for the
connection to be
established).
(p. 36).
Enter DTMF codes
J
0
(numbers).
If necessary, wait again for
3 seconds at a time for the
receiver to process the
entries safely.
Enter a name.
J
Press §Save§.
You may also store just the
DTMF codes (numbers) and then
send them during the call.
20
Text entry
y
Correct a word
Text entry without T9
Press number key repeatedly until
the required letter appears. After a
brief interval the cursor will advance.
Example:
Move letter by letter to the
left/right.
F
§Clear§
Deletes the letter to the
left of the cursor.
Press briefly once for a,
2
Letters are inserted at the
cursor position.
twice for b etc. The first
letter of a name is
automatically written in
upper case.
J
Special characters
Hold down (T9 switched
off). The symbols chart is
displayed:
0
Ä, ä, 1–9 Umlauts and numbers are
displayed after the
relevant letters.
§Clear§
Press briefly to delete the
letter before the cursor,
hold down to erase the
whole word.
Press briefly once for a
space.
1
FI
*
Use the joystick to guide
the cursor (forwards/back
and up/down).
Press briefly: Swap
Navigate to the required
symbol.
T9
T9
FI
between Abc, abc,
T9
ABC, Abc, abc, ABC, 123.
§Select§
Press or confirm choice by
clicking on the joystick.
Status shown in top line of
display.
21
Text entry
Simply press the keys beneath which
the relevant letter is located once
only. For "hotel", for example:
Text entry with T9
"T9" deduces the correct word from
the individual key entries by making
comparisons with an extensive dic-
tionary.
4 6 8 3 5
1
Press. A blank ends a word.
T9 menu
Do not use special characters such as
Ä. Use the standard characters in-
stead, e.g. A; T9 will do the rest for
you.
CMSettingsMDeviceMT9 input
Select input language
Select the language in which you
want to compose your message.
Additional information
Set a full stop. A word is
0
T9 input language
concluded if it is followed by a
space. Within a word, a full
stop represents an apostrophe
or hyphen:
Select.
§Select§
Confirm, the new langua-
ge is set.
e.g. §provider.s§ = provider’s.
Set T9 as standard
The T9 system is set as standard for
text entry.
E
Move to the right. Ends a word.
Correct a word
T9 preferred
F
Move left or right, word by
Select.
word, until the required
§Select§
Confirm.
Shown in the
display.
word is §highlighted§.
Scroll through the T9 word
suggestions again.
§Clear§
Deletes the character to
the left of the cursor and
displays a new possible
word!
Briefly activate, deactivate T9
Press briefly to activate/
#
deactivate T9.
Write a word using T9
Since the display changes as you pro-
ceed, it is best if you finish a word wi-
thout looking at the display.
22
Text entry
®
T9 word suggestions
If several options are found in the
dictionary for a key sequence
(a word), the most probable is dis-
played first. If the word you want has
not been recognised, the next sug-
gestion from T9 may be correct.
T9 Text Input is licensed under one or more of
the following:
U.S. Pat. Nos. 5, 818, 437, 5, 953, 541,
5, 187, 480, 5, 945, 928, and 6, 011, 554;
Canadian Pat. No. 1,331,057;
United Kingdom Pat. No. 2238414B;
Hong Kong Standard Pat. No. HK0940329;
Republic of Singapore Pat. No. 51383;
Euro.Pat. No. 0 842 463 (96927260.8)
DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;
and additional patents are pending worldwide.
The word must be §highlighted§. Then
press:
The displayed word is re-
placed with a different
word. If this word is also in-
correct, press
Predefined text
Text modules can be stored in the
phone for adding to your SMS mes-
sages.
Repeat until the correct
word is displayed. If the
word is not in the dictiona-
ry, write it without T9 or
add it to the dictionary. To
activate:
Write text modules
CMMessagesMSMS
MPredefined text
§Edit§
<Empty> Select and save
with §OK§.
(Spell)
Select.
The last suggestion is deleted and
the word may now be entered wit-
hout T9 support. Press §Save§ to add it
automatically to the dictionary.
J
Write text module.
Use text modules
J
Write message.
Additional information
§Options) Open text menu.
Within a "T9 word", individual letters may
not be edited without first removing the T9
status. In most cases it is better to rewrite
the complete word.
H
H
Select text modules.
Select text module from
the list.
§Select§
Confirm. The text module
is displayed.
§Select§
Confirm. The text module
is inserted in the message
to the right of the cursor.
23
Contacts
s
The phone can store up to
Create new entry
255 entries with several phone and
fax numbers plus additional address
details. These entries are managed
separately from the entries on the
SIM card. However, you can
CMContacts
New entry Press.
Always enter phone
exchange data between contacts
and the SIM card.
J
J
number with dialling code.
Enter first and/or last
names.
Open contacts:
CMContacts
SIM entries
Select or edit phone
numbers stored on the SIM
card (p. 25).
Group
Entries can be organised
by groups (p. 26).
The list of phone numbers in the
phone memory follows next.
Group
Open group menu (p. 26).
Select a group.
F
Make further entries field by field.
Tel./Office:
Tel./Mobile:
FAX:
Post code:
City:
Country:
URL:
Company:
E-mail:
Caller pictures
Ringtone
Street:
24
Contacts
Caller pictures
Select name.
I
Assign a picture to a contact. It is
displayed if you are called by the
corresponding phone number.
B
The number is dialled.
If several phone numbers are stored
for one contact:
Ringtone
Assign a specific ringtone to a
contact. It is played if you are called
by the corresponding phone
number.
Select phone number.
I
B
The number is dialled.
)Save)
Save the entry.
Contacts menu
Different functions are available,
depending on the context:
Change entry
Open contacts (in standby mode):
§Options)
Open menu.
CMContacts
View, Edit, New entry, Delete, Delete all,
Voice dialing (p. 66), Copy entry, SIM
entries, Send SMS, Capacity
Select required entry.
I
§View§
Press.
Special functions:
Copy entry
I
Select input field.
Open entry.
Make changes.
Save setting.
Copy current entry from
contacts to the SIM card.
§Edit§
SIM entries
J
Access to the phone
numbers stored on the SIM
card. See below.
§Save§
the recipient for an SMS.
The text entry is opened
(p. 36).
Call
Open contacts (in standby mode):
CMContacts
25
Contacts
SIM card options
Special functions:
SIM entries
The entries on the SIM card are
managed separately from the
contacts stored in the phone.
However, you can exchange data
between the SIM card and the
contacts.
§Options)
Open menu.
Copy entry
Copy current entry from
the SIM card to contacts.
Copy all Copy all entries from the
Own number
SIM card to contacts.
Enter own phone numbers
for information.
Contacts Access to the phone
numbers saved in contacts
(phone memory).
Entries on SIM card:
Phone No.
the recipient for an SMS.
The text entry is opened
(p. 36).
Always enter phone
number with dialling code.
Name
Enter first and/or last
names.
Call using record no.
Record No.
Each entry is automatically
Entries on the SIM card may be
dialled in standby mode by entering
the record number.
assigned a record number.
Location: SIM
Entries are stored on the
Enter record number.
J
#
SIM card and so can also be
used on other GSM
phones.
Press.
Press.
B
Protected SIM
On special SIM cards,
phone numbers can be
stored in a protected
for editing.
Activate with the function
Protected SIM only (p. 54).
26
Contacts
Group options
Group
Five groups are specified in your
phone to enable you to arrange your
contacts clearly.
§Options)§
Open menu.
Edit name, View members, Remove
entries, Group image, Group melody,
SMS to group
Display groups
CMContactsMGroup
I
Special functions:
Group image
Select group. The number
of members in the group is
shown in brackets after
the group name.
Assign to a group a symbol that
appears on the display when one of
its members calls you.
Group melody
§View§
Display members of the
group.
Assign to a group a ringtone that
always rings when one of its
members calls.
Add group member
SMS to group
Highlight members of the group to
Select group and, after
clicking with the joystick,
select members list.
I
wIhom an SMS is to be sent.
Select entry.
New entry Create new entry. Proceed
§Select§
§OK§
Highlight entry and select.
as for contacts.
Confirm, then write
message and send SMS
(p. 36).
Or
Select from contacts.
§Select§
The entry is added to the
group.
27
Records
Your phone stores the phone
numbers of calls for convenient
redialling.
Calls dialled
Access to the last numbers dialled.
Fast access in standby
mode.
B
Records menu
§Options)
Open menu.
CMCall registerMRecords
The records menu can be called up if
an entry is highlighted.
I
Select record.
§Options)
Open menu.
§Select§
Press.
View, Correct number., Copy to, Delete,
Delete all
I
Select phone number.
Dial phone number.
B
Special functions:
Or
Correct number.
Load number into display
(View)
Display information on the
phone number.
and edit it there if
necessary before dialling.
Copy to Store entry on SIM (see
Missed calls
also below).
The phone numbers of calls that you
have received but not answered are
stored for call back purposes.
Additional information
When copying to the SIM card a new entry
can be created with the phone number or
an existing entry can be corrected. Once
the input field has been selected, the phone
number is transferred to the entry with
§Insert§.
Icon for missed call (in
standby mode). When you
press the right soft key, the
phone number is
displayed.
Requirement: The network supports
the "Caller Identity" feature.
Calls received
Received calls are listed.
28
Time/Charge
arge CMCall registerMTime/Charge
Cost/unit
(PIN2 required)
L
You can display charge details and
the duration of different types of
calls while you speak, as well as
setting a unit limit for outgoing calls.
Enter the charges per unit/period.
Credit limit
L
(PIN2 required)
Display
Special SIM cards allow you or the
service provider to define a credit or
a period after which the phone is
barred for outgoing calls.
Select type of call:
I
Last call
All calls
§Edit§
Press, enter PIN2.
Remain. units
Incoming calls
Outgoing calls
Credit limit
Switch on.
Enter number of units.
J
§Select§
Display data.
Once displayed you can:
§OK§
Confirm.
§Reset§
§OK§
Reset display.
End display.
Then confirm the credit or reset the
counter. The status display for
prepaid cards may vary, depending
on the service provider.
Charge settings
CMCall registerMCharge settings
Auto display
Call duration and call charges are
automatically displayed for each call.
Currency
L
(PIN2 required)
Enter the currency in which the
charge details are to be shown.
29
Camera
Use the integrated digital camera to
Take photos
take photos and send them via the
Multimedia Messaging Service or as
an attachment to an e-mail.
First the camera must be activated.
CMCameraMActivate
The actual picture composition is
shown in the display.
The photos are stored in JPEG format
in the phone and can be displayed
using most picture viewing
programs.
The following functions are
available:
Zoom in/out.
GH
Adjust exposure.
DE
Press. The photo is stored
temporarily.
C
§Yes§
Press to save the photo in
the photo album. Each
photo is saved under a
sequence number and
dated.
30
Camera
Once the photo has been saved you
are immediately offered the
following options:
My photos
CMCameraMMy photos
All saved photos are available in the
photo album.
View finder
Activate the display for a
new picture.
Display photo.
Send via MMS,
Send via Email
Select required photo. The
I
current photo is shown as
Send the photos as an
MMS or as an e-mail
attachment.
a small picture at the
bottom of the display.
§Options)
Open menu.
Select.
Set to wallpaper
Use the photo as a
background image.
View
You have the following options in
display mode:
Go to my photos
Open the photo album.
§Options)
Open menu.
Zoom in/Zoom out, Previous, Next,
Delete, Info, Set to wallpaper
Additional information
When you take a photo the settings are not
stored permanently.
Scroll between the photos
I
in the photo album.
0
Status display with information
on zoom, brightness, quality,
colours, highest mode, and
My photos options
Depending on the actual situation,
different functions will be displayed.
#
resolution. Press the
key
to display the settings and
change them by pressing the
relevant digits.
§Options)
Open menu.
View, Send via MMS, Send via Email, Set
to wallpaper, Create new album, Cut,
Copy, Delete, Delete all, Rename, Info,
Copy to
31
Camera
Special functions:
Quality
Create new album
Set the quality (High, Medium, Low)
Create a new album, give it
a name and protect its
access with a password.
when taking a photograph. A higher
rate means you can take fewer
pictures but of better quality.
Copy, Cut, Paste
Brightness
Cut/copy pictures from an
album and paste into
another album.
F
Set display brightness.
You can take photos with a colour
tint:
Copy to Use picture as a
background image
(wallpaper) or for
identifying a caller (p. 24).
Normal, Mono, Sepia, Bluish
F
Change the setting and
confirm with §Select§.
Settings
Resolution
Nightshot
You can set the picture resolution
(in dpi) for external use (e.g., on a
PC) regardless of what is shown in
the display (always 118x126).
Increase the exposure time in poor
light conditions. Please note that if
the camera or object you are
photographing move, the picture
will be blurred.
• 160X120
• 320X240
• 640X480
Please note that higher resolution
requires more memory.
32
Surf & Fun
un
Go to ...
Internet (WAP)
Enter URL to access WAP
page directly, e.g.
wap.my-siemens.com
Select from list of most
recently visited WAP
addresses.
Get the latest information from the
Internet that is specifically adapted
to the display options of your phone.
Show URL
Exit
Shows the URL for the
current page.
Clicking on the Internet symbol in
the main menu takes you directly to
the pre-set start page.
Close browser and clear
down connection.
Advanced ... Inbox
CMSurf & FunMHomepage
WAP push messages are
stored here (depending on
provider).
Restart Browser
About
Information about the WAP
browser used plus security
information.
The browser is activated as soon as
you call up the function. The
functions of the soft keys vary,
depending on the internet page, for
example "link" or "menu". The
contents of the option menus are
also variable.
End connection
Hold down to clear down
the connection and close
the browser.
Browser menu.
A
Click upwards to highlight
the browser menu and
confirm with
.
Home
The first WAP Internet
page displayed after the
connection has been
established (possibly
determined/preset by the
provider).
Favorites
Reload
Up to 50 URLs stored in the
phone for fast access.
Reload page.
33
Surf & Fun
• The access profile must be set
manually.
Settings
MSurf & Fun MSelect a
C
If necessary, check with your service
provider for details.
function.
Homepage
Activate WAP profile
Select the homepage set. See also
below: Set WAP profiles.
You can change the current profile
each time you access the Internet.
I
Select profile.
Favourites
A list of 15 URLs stored in the phone
for fast access.
§Activate§ Activate. The current profi-
le is selected.
Start
Start selection and visit
URL.
Set WAP profiles
Up to 5 WAP profiles can be set (if
not barred by provider). The entries
may vary depending on the service
provider:
§Options)
Open menu.
Edit
Change entry or create a
new entry.
Delete
Delete entry.
I
§Edit§
Select profile.
Delete all Delete all positions.
Open to make settings.
WAP proflies
Preparation of the phone for WAP In-
ternet access depends on the current
service provider:
Profile name
Enter/change name.
IP address
Enter IP address.
• The settings have already been
made. You can start immediately.
IP port
Enter port number.
Homepage
• Access profiles for a number of
providers have already been set.
Then select and activate profile.
Enter homepage, if not set
by the service provider.
34
Surf & Fun
Linger time
Time in seconds after
which a connection should
be ended if no input or
data exchange takes place.
Select mode
Connect using GPRS or
CSD.
CSD settings
Select or set access profile
via CSD
GPRS settings
Select or set access profile
via GPRS
WAP Push Setting
Switch on / Switch off
You can activate or deacti-
vate the receipt of mes-
sages from you provider.
Servicecentre only
You will receive only WAP
push messages from a pre-
viously defined service
centre.
35
Downloads
ds In the download zone you will find
Download more
At the beginning of each file you will
find the direct number for
downloading additional items.
the folders for the different items
that can be downloaded such as
pictures, sounds and games.
Download more
Select.
C
Press.
MDownloads
Download options
C
Various different items are already
located in each folder. Select the
folder you require:
§Options)
Open menu.
Different functions are available,
depending on the folder selected.
Sounds
View, Send via MMS, Send via Email, Set
to wallpaper, Create new album, Cut,
Copy, Delete, Delete all, Rename, Info,
Copy to, Change password, Detail
Pictures
Wallpaper
§Select§
The folder is opened and
the contents shown as a
list.
Special functions:
Create new album
Select the item you
require.
Create a new album (folder) for
downloaded items. You can protect
a new album with a password.
I
§Select§
The picture is shown or the
sound played or else the
game is started.
Change password
Change the password for an album.
36
SMS
You can transmit and receive very
§Options)
Open menu.
long text messages (up to 1600 cha-
racters) on your phone. They are au-
tomatically composed of up to 10
"normal" SMS messages (note higher
charges).
Send message
Select.
/
Enter phone number or se-
lect from contacts.
J
Additionally you can insert pictures
and sounds in an SMS.
§OK§
Confirm. Send the SMS to
the service centre for
transmission. The sent
SMS is saved in the Outbox
list.
Depending on the service provider,
e-mails and faxes can also be sent
and e-mails received via SMS
(change setting if necessary, p. 40).
Display in the uppermost line:
T9 active.
abc/Abc/
ABC/123
Switch between upper-case/
lower-case letters and digits.
New SMS
150
Display title.
Writing and sending text
Messages (SMS)
Characters still available.
Additional information
SMS profiles......................................p. 40
Message type, Validity period,
Service centre may be requested ... p. 40
MMessagesMSMS
C
MNew SMS
Text input using "T9" (p. 21)
J
allows you to create longer
Enter special characters....................p. 20
messages very quickly
using just a few key stro-
kes.
§Clear§ Press briefly to delete
letter by letter, hold down
to delete an entire word.
37
SMS
Text menu
Add pic.&sound
§Options)
Insert pictures and sounds into mes-
sage.
Open menu.
Send message, Store message, Message
size, Text format, Add pic.&sound, Delete
all, Predefined text, Add ph.number
Write message.
J
§Options) Open text menu at the end
Special functions:
of a word.
Text format
Add pic.&sound
Comprises the following
functions for formatting
text:
Select a section from the
following menu:
Pre. animation
Pre. sound
Font color
Background color
Font size
Own animation
Own Pic
‰ Bold
‰ Underline
‰ Italic
‰ StrikeThrough
Alignment
Own sound
§Select§
Press. The first entry of the
selected section is display-
ed.
I
§Select§
Select entry.
Line feed
The selection is added to
the SMS.
Add pic.&sound
See below.
Predefined text
Use text blocks (p. 22).
Add ph.number
Add a phone number from
contacts.
38
SMS
Additional information
Read new SMS
Pictures and sounds can only be played
back if the destination phone supports the
EMS standard.
In input mode, a wildcard (musical note) is
shown when a melody is selected.
Arrival of a new SMS an-
nounced on display.
To read the SMS, press the
right soft key below the
letter symbol.
>
SMS to group
You can send an SMS message as a
"circular" to a recipient group. See contacts
p. 26.
Lists
All SMS messages are archived in
four different lists, according to their
status.
SMS status report
If the message cannot be transmitted to the
service centre you are offered the chance
to repeat the transmission. If this also fails,
contact your service provider.
CMMessagesMSMS
MSelect list.
The Delivered message only indicates
transmission to the service centre. This will
then attempt to relay the message within a
certain period.
Inbox
The list of received SMS messages is
displayed.
See also Validity period, p. 40.
New, unread messages.
Read messages.
SMS push
This function allows you to dial an Internet
address (URL) directly from a received
SMS. Once marked, the highlighted URL is
displayed. Pressing the Call key dials the
highlighted Internet address.
Draft
The list of the SMS messages not yet
completely transmitted is displayed.
Transmission can be restarted.
Outbox
The list of sent SMS messages is dis-
played.
39
SMS
Detail
Shows date/time plus
recipient/sender.
SMS archive
The list of text messages stored in
the phone is displayed.
Delete all Deletes all the text mes-
sages in this list.
Messages in the archive.
Move to archive
Move SMS message to ar-
chive.
Read options
Each list offers different functions as
applicable.
Additional information
Message memory full. Delete
SMS messages you no longer
require or move them to the
archive.
Select required SMS.
I
(Read)
Display SMS.
(Options) Open menu and select the
Ringtones, logos ...
function you require:
You can receive links for downloading
ringtones, logos, screensavers, animations
and information about applications with
panreSssMinSg. tPhleeaCsaellhkiegyhlBight this,lisntkaratnthde, by
Detail, Reply, Forward, Edit, Delete,
Delete all, Extract number, Move to
archive, Extract media, Extract URL
Special functions:
download.
Delete
Reply
Deletes selected SMS.
Create New.
Please check that the dial-in access (p. 54)
is configured.
Edit Edit received SMS.
Answer is yes/Answer is
no Answer with yes or no
only.
Forward Forward text message.
Edit Edit text message.
40
SMS
Transmit to other services
via SMS:
SMS setup
CMMessagesMSMS
Fax, Voicemail, ERMES,
Paging, X.400, Internet
MSMS setup
Up to 5 SMS profiles can be set. The
transmission characteristics of an
SMS are defined in these. The pre-
setting depends on the SIM card in-
serted.
Validity period
Select the period in which the ser-
vice centre is to try to deliver the
message:
1 day
2 days
Activate the preselected profile
1 week
4 weeks
6 months
Status report
You will receive confirmation as to
whether a message has been deli-
vered successfully or not. This ser-
vice may be subject to a charge.
I
Select profile.
§Activate§ Press to activate profile.
L
Set/change profile
I Select profile.
§Options§ Open menu.
Edit Select.
Direct reply
L
Service centre
The reply to your SMS message is
handled via your service centre
when Direct Answer is activated (for
information please contact your ser-
vice provider).
Enter or edit the service centre pho-
ne numbers (you can obtain this in-
formation from your service provi-
der).
SMS via GPRS
L
Message type
Manual
Send SMS automatically by GPRS
(if available). Requirement: GPRS is
activated. Ensure that your service
provider offers this function.
The message type is
requested for each
message.
Normal text
Normal SMS message
(standard setting).
41
MMS
The Multimedia Messaging Service
enables you to send texts, pictures
(also photos) and sounds in a combi-
ned message to another mobile pho-
ne or to an e-mail address.
Pictures and graphics can be created
using the integrated digital camera
or selected from the standard
animations and inserted into an
MMS.
Depending on your phone's settings,
you will either receive the complete
message automatically or be notified
that an MMS has been saved in the
network, giving sender and size de-
tails. You may then download it to
your phone to read it.
CMMessagesMMMS
MNew MMS
(Insert)
Press.
Picture
Insert a picture. The picture list is
opened for selection.
Ask your service provider whether
this service is available. You may
need to register for this service sepa-
rately.
Text modules
Write a text with the help of T9.
Photo
Select from the photo album and
insert.
Text modules
The list of text modules is opened for
selection.
Writing/sending MMS
Messages
Sound
Add a sound.
Ringtone
Add a ringtone.
Insert wallpaper
The list of background images (wall-
papers) is opened for selection.
An MMS consists of the address hea-
der and the content.
An MMS message can consist of a se-
ries of pages, each one of which may
sounds and pictures.
Insert page
Texts can be written with the help of
T9 (p. 21).
A new page is added to the MMS.
42
MMS
Display time
Receive MMS
Set duration of display for individual
pages (1 seconds to 33 seconds).
Arrival of new MMS
announced on display.
Options for writing MMS
messages
(Options) Open menu.
Press the right soft key to
read the MMS or notificati-
on.
>
Send MMS
Enter recipient details:
Receive according to setting:
• complete MMS,
To:
Phone number/e-mail
address of recipient.
• notification only. To receive the
complete MMS, press §View§.
Subject: Enter MMS heading (up to
40 characters).
Lists
Cc:
E-mail address for the copy
recipient.
All MMS messages are saved in four
different lists:
Bcc:
E-mail address for blind
copy recipients (the
other recipients are not
shown the Bcc recipient).
CMMessagesMMMS
MSelect list.
Inbox
Store MMS
Stores the MMS as a draft.
The list of MMS messages and notifi-
cations received is displayed.
Delete items
Delete an item on a page, e.g.,
a picture.
§View§
Automatic presentation of
the MMS. Use any key to
cancel.
Info
Scroll page by page with
the control key.
I
J
A
Information about the size of the
message.
Call up individual pages
directly by number key.
Preview page, Preview MMS
Play back page/whole MMS in the
display. Use any key to cancel.
End playback.
43
MMS
Draft
MMS setup
The list of the MMS messages not yet
completely transmitted is displayed.
Transmission can be restarted.
CMMessages
MMMSMMMS setup
Select a function.
I
Outbox
The list of sent MMS messages is
displayed.
Validity
Select the period in which the ser-
vice centre is to try to deliver the
message. Choose between:
List options
The following functions are available
depending on the list selected:
1 day
2 days
1 week
4 weeks
Maximum*
§Options§ Open menu.
Reply, Reply all, Forward, Call, Delete,
Info, Extract, View again
Special functions:
* Maximum period that the service provider
permits.
Delivery report
Request delivery confirmation for
sent messages.
Extract
Pictures Save picture as a screensa-
ver.
Sounds Save sound as a ringtone.
MMS retrieve
Choose between Auto download,
Deferred retrieve for an SMS, or reject
reception.
Allow info receiving
Only the notification is received.
Allow Spam
Permit reception of advertising SMS
(SPAM).
44
MMS
When roaming
Memory status
Switch MMS reception on/off out-
side your home network. This means
that no charges are incurred for inco-
ming messages.
MMessagesMMMS
C
MMemory status
Display memory already used or still
available.
MMS profile
A maximum of 5 MMS profiles can
be selected. The entries may vary de-
pending on the service provider:
I
§Edit§
Select profile.
Open to make settings.
Profile name
Enter/change name.
IP address
Enter IP address.
IP port
Enter port number.
Homepage
by the service provider.
GPRS Bearer
Settings (p. 56).
45
E-mail
Your phone has an e-mail program
(client). You can use it to create and
receive e-mails.
Options
§Options§ Open menu.
Input text.
Save
Send
Store in drafts.
Send e-mail.
Add attachment
An e-mail may contain up to
5 attachments (e.g., pictures).
Write new e-mail
CMMessagesME-mail
I
Attachment 1:
§Options§ Open menu.
Add pictures, photos, back-
MNew Email
Enter e-mail address
§Options§ Open menu and select "re-
ground images (wallpa-
per), ringtones or sounds.
cipient".
To:/Cc: E-mail address of
receiver(s).
Receive/read e-mail
The e-mail address may be
selected from contacts by
clicking on the joystick.
CMMessagesME-mail
MReceive
J
be retrieved from the server. The ser-
vice provider is dialled with the de-
fault access profile (p. 56) and all e-
mails are transmitted to the inbox
list.
ding (up to 255 charac-
ters).
0Press briefly to write special
characters such as @ (p. 20).
Additional information
T9 helps you write e-mails (p. 21).
The e-mail client always receives complete
messages including header, content and, if
applicable, attachment. You can restrict the
size of the received messages (p. 47).
E-mail size is limited to 256 KB.
46
E-mail
Lists
Email setup
CMMessagesME-mail
CMMessagesME-mail
MSelect list.
MEmail setup
Before using this service, you must
set the server access and your e-mail
options. The data for these may al-
ready have been entered. Otherwise
your service provider will supply you
with the relevant information.
Inbox
The list of received e-mails is
displayed.
Draft
The list of e-mails not yet transmit-
ted is displayed.
Set profile
I Select profile.
§Options§ Open menu.
Edit Select.
Outbox
List of e-mails already sent.
List options
The following functions are available
depending on the list selected:
Additional information
Your service provider must support the
following protocols for successful data
exchange with the e-mail server:
§Options§ Open menu.
Reply, Reply all, Forward, Delete, Send,
Edit, Copy to, Delete all, View
POP3 and SMTP or eSMTP.
E-mails will be MIME-encoded for
transmission.
Encryption of e-mail transmission (SSL,
APOP) is not possible at present.
47
E-mail
Connect using
Download
Header only
Select mode
Automatic, CSD settings, GPRS settings
CSD settings
No attachments are transmitted.
All
Select the CSD profile.
The e-mail client receives complete
messages including heading, con-
tents, and attachment where appli-
cable.
GPRS settings
Select the GPRS profile.
User name
Enter, for example, your name.
Memory status
MMessagesME-mail
C
Incoming setup
MMemory status
Server: Enter IP address.
Display memory already used or still
available.
Port:
Authentication:
Activate/deactivate.
Enter port number.
Account: Enter account, if not set by
the service provider.
Password:
Your password.
Outgoing setup
See Incoming setup.
Email address
Your e-mail address, e.g.:
48
Voice msg./mailbox
sg./ Most service providers supply an ex-
ternal voice mail service. A caller
may leave a voice message for you in
this mailbox
Away from your home network you
may have to dial a different mailbox
number and enter a password before
you can listen to any messages.
• if your phone is switched off or
not ready to receive,
Settings
The service provider supplies you
with two phone numbers:
L
• if you are making a phone call
(and Call Waiting is not activated,
p. 17).
Save mailbox number
Call this phone number to listen to
the mailbox.
If voice mail is not part of your ser-
vice provider's package, you will
need to register and settings may ha-
ve to be made manually. The follo-
wing description may vary slightly,
depending on the service provider.
To change the phone number:
CMMessagesMVoice msg.
§Edit§
Press.
Enter phone number.
Confirm.
J
Listening to message
A new voice message can be an-
nounced as follows, depending on
the service provider:
L
§OK§
Save call divert number
Calls are diverted to this
phone number.
Icon plus beep.
CMCall registerMDivert
Or
A text message announces
a new voice message.
Select condition for call divert, e.g.:
Unanswered.
Set
Press.
Or
You receive a call with an automatic
announcement.
Enter call divert number.
Confirm.
J
§OK§
To listen to the mailbox:
Registering with the network starts.
Divert will be confirmed after a few
seconds. Further information on call
divert can be found on p. 57.
CMMessagesMVoice msg.
(Listen)
Press.
49
Cell broadcast
Some service providers offer infor-
Auto display
CB messages are displayed in stand-
by mode, longer messages are
scrolled automatically.
mation services (info channels), e.g.,
area code numbers, stock exchange
information. If receive has been acti-
vated you will receive messages
about the subjects that are active in
your "Topic list".
st
CB languages
You can specify the language in
which you wish to receive CB mes-
sages.
CMMessagesMCell broadcast
Broadcast
You can switch the cell broadcast
service on and off. If the CB service is
activated, operating time for the
phone will be reduced.
Read new CB
Download current messages.
Topic list
You can add any number of topics to
this personal list. At least ten entries
may be entered using the channel
number (ID) and, if required, the na-
me itself. Five topics may be active in
each of the two sections:
User def.
<New Entry>
Select.
Enter a topic with its channel num-
ber and confirm with §OK§.
Current
<New Entry>
Select.
Select a topic from the list.
50
Settings
Record Voice ringtone
The list of recordings is displayed.
§Options)
Open menu.
New record
Audio Settings
Record a new ringtone.
§Record§ Start recording.
CMSettingsMAudio Settings
MSelect a function.
§Stop§
§Save§
End recording.
The recording is automati-
cally saved with a time
stamp which can be over-
written.
Volume
Select the section for
I
which the volume of the
ringtone is to be set:
§Play§
Play back recording before
storing it.
Any call
Alarm
Ringer setting
Cell broadcast
On/Off
Activate/deactivate all to-
nes.
§Edit§
F
§Save§
Press.
Set volume.
Save setting.
Beep
Reduce ringtone to a short
signal (beep).
Melodies
Set an individual ringtone for each
section:
Additional information
Shown in display: ringtone off.
Any call
Alarm
Silent alert
Activate/deactivate silent alert (func-
tions in addition to ringtone).
Cell broadcast
Voice ringtone
You can use any individual sound re-
cording (voice, noise or music) as a
ringtone.
Key tones
You can set the type of acoustic key
tone:
Click or tone or silent
51
Settings
Composer
You can also compose five simple
ringtones of your own.
Device
CMSettingsMDevice
MSelect a function.
§Options) Open menu.
Language
Set the language of the display text.
When Automatic is set, the language
of your service provider is used.
Edit
Select.
Keys 1 to 7 correspond to
the notes C, D, E, F, G, A, B.
J
F
If a language that you do not under-
stand happens to be set, the phone
can be reset to the language of your
home service provider with the follo-
wing input:
In the melody, to move
one note up or down.
Raise/lower the note by a
semitone.
#
Increase length of notes/
rests.
* # 0 0 0 0 # B
Decrease length of notes/
rests.
*
B
0
Display
Illumination
Switch off illumination, illuminate
display only or display plus keypad.
Raise/lower the note by an
octave.
Sets a rest.
Contrast
Set display contrast:
§Options) The menu offers other
functions:
Press the joystick repea-
I
Edit, Set as ring, Rename, Info
tedly at the top/bottom to
adjust up or down.
Brightness
Set display brightness:
Press the joystick repea-
I
tedly at the top/bottom
and select the brightness
you require.
52
Settings
Wallpaper effects
Own greeting
Set the arrangement and effects for
the wallpaper graphics for the dis-
play.
Enter greeting to be displayed in-
stead of animation when phone is
switched on.
Logo display
Activate/deactivate display of service
provider logo.
Delete old message and
J
create new message.
§OK§
Confirm changes and
switch on.
Screen saver
Checking status
The screensaver shows a picture in
the display when a period set by you
has elapsed. The function is ended
by an incoming call or by pressing
any key.
Factory settings
Reset phone to default values
(factory setting).
Phone identity IMEI
The screen saver may be a time dis-
play, the provider logo or a slide
show made up of your own photos.
The phone identity number (IMEI) is
displayed. This information may be
useful for customer service.
Auto key lock
If activated, the keypad is locked au-
tomatically if no key has been
T9 input
T9 input language
pressed for 30 seconds in standby
mode. This prevents the phone from
being used accidentally. However,
you can still be called and you can
still make an emergency call.
Select language for text entry.
T9 preferred
Activate/deactivate intelligent text
entry.
Additional information
The keypad can also be directly locked and
unlocked in standby mode.
Hold down.
#
53
Settings
Any to answer
Incoming calls can be accepted by
pressing any key (except for
During calls
CMSettingsMDuring calls
).
A
MSelect a function.
Hide ID
L
Call screening
When you make a call, your phone
number can be displayed on the re-
cipient's display (depending on the
service provider).
Only calls from numbers that are
stored as contacts or in a predefined
group are signalled audibly or by si-
lent alert. Other calls are only dis-
played.
To suppress this display, you can en-
able the "Hide ID" mode for all subse-
quent calls or just for the next call.
You may need to register separately
with your service provider for these
functions
If you do not accept these calls, they
are diverted to your mailbox (if set,
p. 57).
In standby mode: call
screening is activated.
Call waiting
L
If you are registered for this service,
you can check whether it is set and
you can activate or deactivate it.
Minute beep
During the call, you will hear a beep
after each minute as a reminder of
the time elapsed. The recipient does
not hear this beep.
54
Settings
Security
Network
CMSettingsMSecurity
CMSettingsMNetwork
MSelect a function.
Codes
Line
L
(see p. 12)
To use this function, two separate
phone numbers must be registered
on the phone.
Protected SIM only
L
(PIN2 protected)
Select line
Dialling options are restricted to SIM-
protected phone numbers. If only
area codes are entered, relevant
phone numbers can be added to the-
se manually before dialling.
Select the currently used phone
number.
Display current phone number:
This SIM only
(Phone-code protected)
L
Block line
(Phone-code protected)
The phone can be connected to a
SIM card when the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
You may limit usage to one phone
number.
If the phone is to be used with a dif-
ferent SIM card, enter the phone co-
de when requested.
55
Settings
Configuration
Connectivity
Network info
The list of GSM networks currently
available is displayed.
CMSettingsMConnectivity
MSelect a function.
GPRS (General Packet Radio Service)
is a method for transmitting data fas-
ter in the mobile network. Use GPRS
and if the network has sufficient ca-
pacity, you can be connected to the
Internet permanently. Only the actu-
al transmission time is charged by
the network operator.
Choose network
Network search is restarted. This is
useful if you are not on your home
network or want to register on a dif-
ferent network. The network list is re-
built when Auto network is set.
Auto network
Some service providers do not yet
support this service.
If "Automatic network" is activated,
the next network on the list is dialled
in ranking order of your "preferred
networks". Otherwise a different
network can be selected manually
from the list of the available GSM
networks.
CSD (Circuit Switched Data)
Data transfer is made via a data con-
nection to a default IP address of
your network provider or service pro-
vider. This connection can be used
for exchanging data, such as, for ex-
ample, Internet access, or for down-
loading games and applications as
well as for using WAP services.
Pref. network
Enter your preferred service provi-
ders here for when you leave your
home network (e.g. if there are dif-
ferences in price).
Shown in the display
Registered.
Additional information
GPRS connection active.
If the signal strength of the preferred
network is inadequate when you switch on
the phone, the phone may register in a
different network. This can change when
the telephone is next switched on or if
another network is selected manually.
56
Settings
GPRS settings
Bearer settings
You can activate GPRS for the profile
and change the settings here. You
can only start to use GPRS once you
have activated GPRS on your phone.
For SMS, MMS, WAP and e-mail ser-
vices at least one connection profile
must be set up and activated. You
can obtain the current settings from
your service provider.
Profile name
Give the profile a name or overwrite
one that has been preselected
CSD settings
If it has not been pre-installed, enter
the data or enter the required set-
tings (your service provider will sup-
ply you with information on this):
GPRS APN
Enter service provider address.
Authentication
Activate/deactivate.
User name
Enter user name (login name).
Password
Profile name
Give the profile a name or overwrite
one that has been preselected
Call type
Select ISDN or analogue.
Dial number
Enter ISP number.
User name
Enter login name.
Password
Enter password (shown as a series of
asterisks).
DNS
Enter IP for the domain name
system.
GPRS info
Show information about the connec-
tion (download volume/duration).
Enter password (shown as a series of
asterisks).
DNS
Enter the IP for the domain name
server.
Transfer rate
Set the data transfer rate.
Additional information
Prolonged GPRS connection can cause
the temperature of the phone to rise. This is
normal and not dangerous.
57
Divert
CMCall registerMDivert
Not reachable
Divert occurs if phone is switched off
or is out of range.
You can set the conditions for which
calls are diverted to your mailbox or
other numbers.
No reply
Set up call divert (example):
A call is only diverted after a delay
that is determined by the network.
The period can be set to a maximum
of 30 seconds in 5 second intervals.
The most common condition for call
divert is, for example: Unanswered
Select Unanswered
L
I
(includes the
Busy
conditions Not reachable,
No reply, Busy; see below).
Divert occurs if a call is in progress. If
Call waiting is activated (p. 53), you
will hear the call waiting tone during
a call.
§Select§
Press.
Press.
Set
Enter the phone number
to which the caller will be
diverted (if not already
done)
J
Receiving fax
Fax calls are diverted to a number
with a fax connection.
L
Receiving data
Data calls are diverted to a phone
number with a PC connection.
§OK§
Confirm. After a short
pause, the setting is
confirmed by the network.
L
All calls
All calls are diverted.
L
Icon in the top line of the
display in standby mode.
58
Divert
Status check
Additional information
You can check the current divert sta-
tus for all conditions. After a short
pause, the current situation is trans-
mitted by the network and display-
ed.
Note that the divert is stored in the network
and not in the phone (e.g., when the SIM
card is changed).
Check condition or delete it
First select the condition.
Clear all
All set diversions are cleared.
L
§Select§
Check status
Select.
Press.
Or
Deactivate
Select.
Edit phone number
Proceed as with "Set divert". When the
stored number is displayed:
§Delete§ Press. The phone number is
deleted.
Enter new number and
confirm.
J
59
Barrings
CMCall registerMBarrings
When roaming
You do not receive calls when you
are outside your home network. This
means that no charges are incurred
for incoming calls.
L
Barring restricts the use of your SIM
card (this is not supported by all ser-
vice providers). You need a 4-digit
password which your service provi-
der will give you. You may need to
be registered separately for each
barring.
Status check
Status check for network barring.
All outgoing
All outgoing calls except emergency
numbers 112 and 999 are barred.
Clear all
All barrings are deleted. A password
which the service provider will give
you is needed for this function.
Outgoing intern.
(International outgoing)
Only national calls can be made.
Out.int.or home
(International outgoing without
home country)
International calls are not permitted.
However you can make calls to your
home country when abroad.
Incoming
The phone is barred for all incoming
calls (the forwarding of all calls to
the mailbox offers a similar effect).
60
Closed user group
ser CMCall register
Pref. group
MClosed user group
If activated, calls may only be made
within this standard user group
(depending on the network
configuration).
MSelect a function.
Depending on service provider,
you can create groups with this
L
service. These can have access to
internal (company) information, for
example, or special tariffs apply.
Please check with your service
provider for details.
Closed user group
user group must be deactivated for
normal phone use (phone code,
p. 13).
Select group
You can select or add groups other
than preferred groups (see below).
Code numbers for the groups are
obtained from your service provider.
Outg. access
In addition to network control for a
user group, it is possible to set
whether outgoing calls outside the
group are permitted. If the function
is deactivated, only calls within the
group are permitted.
61
Fast access key
ess The right soft key and the number
Speed keys
keys 2 to 9 (speed dialling numbers)
can each be assigned an important
phone number or a function. The
phone number can then be dialled or
the function can be started at the
touch of a button.
speed dialling numbers for fast
access. Number key 1 is reserved for
the mailbox (p. 48).
Change
Press a number key (2- 9).
Left soft key
Assign a function/phone number to
the left soft key for fast access.
J
If the key is not yet
assigned:
§Set§
Press.
Change
Select application.
I
§Camera§ Press briefly.
§Select§
Confirm setting.
For Phone No. pick out a
name from contacts for
assignment to the key.
§Edit§
Scroll to new application in
the list.
• Assign a new application (e.g.
New SMS) to the soft key.
§Edit§
See “Right soft key".
• Special case Phone No.. From
contacts/SIM, pick out a name
(e.g. “Carol”) to assign to the soft
key.
Apply
Start a stored application or dial a
phone number.
In standby mode, hold
3
§Select§
Confirm setting.
down.
Apply
The setting "Carol" is used here only
as an example.
§Carol§
Hold down.
62
Extras
The calendar offers a
General
(Month)
(Week)
monthly view,
weekly view.
Select the required day in
the views.
F
Agenda
I
CMExtras
)Agenda) Daily overview.
You will find the following functions
in the organizer:
Enter new appointments or display
entries already recorded.
Calendar, Appointments, Notes, Alarm
Cl., Countdown, World clock, Auto off,
Calculator, Currency conv., Voice
control, Voice recording
If there are appointments entered,
the appointments for the selected
day are displayed in chronological
order.
If an appointment time is reached
with the alarm set, you will hear a si-
gnal tone.
Organiser
CMExtrasMOrganiser
MSelect a function.
•
New entry
<New entry>
Select.
Calendar
tasks in the calendar. Time and date
must be set for the calendar to work
correctly (p. 64).
Make entries in the fields.
J
Subject Describe the entry.
Start date: If necessary, change the
start date.
Start time: If necessary, change the
start time.
Status: Outstanding or Done.
• Display entry
Select entry.
I
(View)
Display entry.
63
Extras
Calendar options
§Options)
Text entry options
§Options)
Open menu.
Open menu.
Send, Save, T9 input, Line feed, Clear text
View, Edit, New entry, Delete, Delete all,
Capacity
• Display entry.
Select entry.
I
Appointments
All appointment entries are display-
ed in chronological order. If an alarm
is missed it appears in the list of
missed appointments.
(View)
Press.
Notes options
§Options)
Open menu.
<New entry>
View, Edit, New entry, Delete, Delete all,
Confident, Send, Capacity
See Agenda p. 62.
Special function:
Notes
Confident (confidential)
Use your phone as a notepad. T9
support makes it easier to write short
notes.
Protect confidential notes with the
phone code (p. 12). We recommend
that you do not store any passwords
(PIN, TAN etc.) as notes.
•
New entry.
<New entry>
Select.
Entg. Termine
Enter text, up to
50 characters.
Events with an alarm to which you
have not reacted are listed for rea-
ding.
J
§Options)
Open menu.
Store entry.
Save
Additional information
Missed appointment.
Missed alarm.
64
Extras
Countdown
A set time elapses. The last
3 seconds are indicated by a beep.
At the end a special beep sounds.
Clock
MExtrasMClock
C
MSelect a function.
Alarm Cl.
The alarm will ring at the time set by
you (even when the phone is swit-
ched off).
)Set)
Set period of time.
Confirm.
§OK§
§Start§
§Stop§
)Edit)
§Reset§
Start counter.
Interrupt counter.
Change period of time.
Reset counter to start time
(after interruption).
World clock
Local city
Select the town for your time zone:
)Edit)
Open map of the world.
Navigate to towns.
I
)Set)
Press.
§Select§
Confirm and indicate
whether you are using
summer time.
Navigate to input fields.
I
Status:
)Edit)
Time
Switch on/off.
Set the time of day. The clock must
be set correctly once at the initial
start-up.
Time:
Enter alarm call time.
Set days for alarm calls.
Select day:
F
)Edit)
§OK§
Press. To switch a day on/
off.
Confirm.
Additional information
When the alarm clock is
switched on, the display is also
in standby mode.
65
Extras
Set date
Calculation
Set the local date.
CMExtrasMCalculation
Time format
MSelect a function.
Select 12 hours or 24 hours.
Calculator
Date format
Enter number
Select the date format from 4 diffe-
rent formats, e.g. DD/MM/YYYY or
MM/DD/YYYY.
J
(max. 8 digits).
Select calculator function.
I
J
>
Auto off
The phone switches off each day at
the set time.
Repeat procedure with
other numbers.
Result is displayed.
)Set)
Press.
Special keys
)Edit)
Press to activate/deactiva-
te, then enter time.
Toggle between "+" and "–".
*
#
<
§OK§
Confirm.
Set decimal point.
Delete digit to the left of the
cursor.
If the battery is removed for longer than
30 seconds, the clock must be reset.
Currency conv.
You may calculate the exchange ra-
tes between two currencies.
Rate setting
Domestic Enter the rate for the do-
mestic currency (e.g., 1).
Foreign Enter the rate for the fo-
reign currency.
§Save§
Save setting.
Compute
Enter the sum to be con-
verted.
J
§Convert§ Start calculation. The re-
sult is displayed.
66
Extras
Now say the name. After a second
Voice control
beep and message in the display,
repeat the name. A beep confirms
the recording and all entries are
displayed.
MExtrasMVoice control
C
MSelect a function.
Up to 10 phone numbers or func-
tions can be dialled or started by sta-
ting a name. The voice dialling ent-
ries are stored in the phone (not on
the SIM card!).
Edit
Select entry.
I
§View§
§Play§
Display entry.
Play recording.
Apply
Press. Start voice control
(in standby mode).
Or
)Edit)
G
Change name or phone
number.
Now speak the name or function.
The phone number is dialled or the
function carried out.
Noisy environments may affect voice
recognition. If attempt was
unsuccessful, press the side key once
more and repeat the name.
Voice dialing
(for phone numbers)
Record
Select <New entry> then
enter name and phone
J
§Save§
number.
Confirm.
§Start§
Start recording.
A short signal sounds.
67
Extras
Voice command
(for functions)
Voice recording
MExtrasMVoice recording
C
A list with the functions available is
displayed. Entries for which a voice
command is stored are marked with
a symbol.
Use the phone to record short voice
memos.
• Use your phone as a dictating
machine when on the move.
Record
• Record a memo as a reminder or
as a note for others.
Select a function.
I
• Record a call - useful for
remembering numbers or
addresses.
§Record§ Display function.
§Yes§
Confirm selected function.
Start recording.
§Start§
Record
<New entry>
Now speak the command for the
function. The phone will repeat it.
Carry out procedure again. A beep
confirms the recording and the list is
displayed again.
Select.
§Record§ Start recording.
§Pause§ Recording pause.
§Stop§
End recording.
§Save§ Save
or
§Play§ play back.
§Save§
The recording is automati-
cally saved with a time
stamp which can be over-
written later.
Or
§Delete§ Delete the time stamp and
assign new names.
68
Extras
Play back
The list of recordings is displayed.
Select recording.
I
§Play§
Play recording back.
Voice recording options
§Options)
Open menu.
Play, New record, Delete, Delete all,
Rename
Warning!
The use of this feature may be subject to
restrictions under criminal law.
Please inform the other party to the
conversation in advance if you want to
record the conversation and please keep
such recordings confidential.
You may only use this feature if the other
party to the conversation agrees.
69
Customer Care
If repair work is necessary, please contact
om
re
We offer fast, individual advice! You have
several options:
Our online support on the Internet:
one of our service centres:
Abu Dhabi.........................................0 26 42 38 00
Argentina .....................................0 80 08 88 98 78
Australia..........................................13 00 66 53 66
Austria.............................................05 17 07 50 04
Bahrain .................................................... 40 42 34
Bangladesh.......................................0 17 52 74 47
Belgium.............................................0 78 15 22 21
Bolivia ...............................................0 21 21 41 14
Bosnia Herzegovina..........................0 33 27 66 49
Brazil............................................0 80 07 07 12 48
Brunei ..................................................02 43 08 01
Bulgaria................................................02 73 94 88
Cambodia ............................................12 80 05 00
Canada ........................................1 88 87 77 02 11
China ...........................................0 21 50 31 81 49
Croatia ..............................................0 16 10 53 81
Czech Republic...............................02 33 03 27 27
Denmark ..............................................35 25 86 00
Dubai ................................................0 43 96 64 33
Egypt.................................................0 23 33 41 11
Estonia.................................................06 30 47 97
Finland............................................09 22 94 37 00
France.............................................01 56 38 42 00
Germany......................................0 18 05 33 32 26
Greece.........................................0 80 11 11 11 16
Hong Kong...........................................28 61 11 18
Hungary ..........................................06 14 71 24 44
Iceland ...................................................5 11 30 00
India.............................22 24 98 70 00 Extn: 70 40
Indonesia .....................................0 21 46 82 60 81
Ireland.............................................18 50 77 72 77
Italy .................................................02 66 76 44 00
Ivory Coast...........................................05 02 02 59
Jordan...............................................0 64 39 86 42
Kenya.....................................................2 72 37 17
Kuwait....................................................2 45 41 78
Latvia .....................................................7 50 11 18
Lebanon...............................................01 44 30 43
Libya ...............................................02 13 50 28 82
Lithuania ...........................................8 52 74 20 10
Luxembourg........................................ 43 84 33 99
Macedonia ...........................................02 13 14 84
Malaysia....................................+ 6 03 77 12 43 04
Malta.......................................+ 35 32 14 94 06 32
Mauritius ................................................2 11 62 13
We can be reached any time, any place.
You are given 24 hour support on all
aspects of our products. Here you will find
an interactive fault-finding system, a
compilation of the most frequently asked
questions and answers, plus user guides
and current software updates to
download.
You will also find the most frequently
asked questions and answers on p. 71.
You can also get personal advice about our
range of products on our Premium Hotline:
United Kingdom .................. 0906 9597500
(£0.75 per minute)
Qualified Siemens employees are waiting to
offer you expert information about our
products and installation.
In some countries repair and replace
services are impossible where the products
are not sold through our authorised dealers.
When calling customer service, please have
ready your receipt and the phone identity
number (IMEI, to display press # 0 6 #), the
*
software version (to display, press # 0 6 #,
*
then
) and if available, your Siemens
§Info§
Service customer number.
70
Customer Care
Mexico .......................................01 80 07 11 00 03
Morocco...............................................22 66 92 09
Netherlands .................................0 90 03 33 31 00
New Zealand...................................08 00 27 43 63
Nigeria ..............................................0 14 50 05 00
Norway.................................................22 70 84 00
Oman........................................................79 10 12
Pakistan..........................................02 15 66 22 00
Paraguay ..........................................8 00 10 20 04
Philippines ........................................0 27 57 11 18
Poland.............................................08 01 30 00 30
Portugal ............................................8 08 20 15 21
Qatar....................................................04 32 20 10
Romania .........................................02 12 04 60 00
Russia..........................................8 80 02 00 10 10
Saudi Arabia .....................................0 22 26 00 43
Serbia .............................................01 13 22 84 85
Singapore ............................................62 27 11 18
Slovak Republic..............................02 59 68 22 66
Slovenia............................................0 14 74 63 36
South Africa ....................................08 60 10 11 57
Spain.................................................9 02 11 50 61
Sweden.............................................0 87 50 99 11
Switzerland .....................................08 48 21 20 00
Taiwan ............................................02 23 96 10 06
Thailand............................................0 22 68 11 18
Tunisia .................................................71 86 19 02
Turkey..........................................0 21 65 79 71 00
Ukraine ........................................8 80 05 01 00 00
United Arab Emirates........................0 43 31 95 78
United Kingdom ...........................0 87 05 33 44 11
USA .............................................1 88 87 77 02 11
Vietnam................................................49 43 73 23
Zimbabwe ............................................04 36 94 24
71
Questions & Answers
ns &
If you have any questions about using your phone, visit us at
www.my-siemens.com/customercare anytime. As further help we have listed below some
frequently asked questions and answers.
Problem
Possible causes
Possible solution
Phone cannot On/Off key not pressed long
be switched on. enough.
Press On/Off key for at least 2 seconds.
Flat battery.
Charge battery. Check charging indicator in the
display.
Battery contacts dirty.
Clean contacts.
See also below under “Charging
error”.
Standby time is Frequent use of organiser and
Restrict use if necessary.
too short.
games.
Display illumination on.
Switch off display illumination (p. 51).
Activate key lock (p. 52).
Unintentional keystrokes
(illumination!).
Charging error Battery totally discharged.
(charge icon
not displayed).
1) Plug in power supply unit, battery is on charge.
2) Charge icon appears after approx. 2 hours.
3) Continue to charge battery.
Temperature out of range:
+5 °C to +40 °C.
Make sure the ambient temperature is right, wait for
a while, then recharge.
Contact problem.
Check power supply and connection to the phone.
Check battery contacts and connection socket, clean
them if necessary, then insert battery again.
No mains voltage.
Use different mains power socket, check mains
voltage.
Wrong charger.
Battery faulty.
Only use original Siemens accessories.
Replace battery.
SIM error.
SIM card not correctly inserted.
Dirty SIM card contacts.
Check that the SIM card is inserted correctly (p. 8).
Clean SIM card with a dry cloth.
Use 3V SIM cards only.
SIM card with wrong voltage.
SIM card damaged (e.g. broken). Carry out a visual check. Ask service provider to
change SIM card.
72
Questions & Answers
Problem
Possible causes
Possible solution
No network
connection.
Weak signal.
Move to another place where the network reception is
better (e.g., window) or go outdoors.
Outside GSM range.
Invalid SIM card.
Contact the service provider.
New network not authorised. Try manual selection or select a different network
(p. 54).
Network call barring is set. Check network barrings (p. 59).
Network overloaded.
Try again later.
is switched on.
another place.
Phone loses
network.
Signal too weak.
(p. 55). Switching the phone off and on again can
speed this up.
Calls not possible. Second line set.
New SIM card inserted.
Set first line (p. 54).
Check for new barrings.
Reset limit with PIN 2 (p. 28).
Load credit.
Charge limit reached.
Credit used up.
Certain uses of the Call restrictions are in place. Barrings can be set by service provider. Check
phone not possible.
barrings (p. 59).
Impossible to make Contacts memory is full.
entries in contacts.
Delete entries (p. 24).
Voice message not Call divert to mailbox not set. Set call divert to mailbox (p. 57).
functioning.
SMS (text
message) flashing.
SMS memory is full.
To free up capacity, delete (p. 39) or file (p. 39) text
messages (SMS).
Function cannot be Not supported by service
Contact your service provider.
set.
provider or registration
required.
Capacity problems Memory full.
with, for example,
Delete files in the relevant areas.
ringtones, pictures,
SMS archive.
No WAP access,
downloading not
possible.
Profile not activated, profile Activate and set WAP profile (p. 33). If necessary ask
settings wrong/incomplete. your service provider.
73
Questions & Answers
Problem
Possible causes
Possible solution
Message cannot be Service provider does not support
Contact your service provider.
sent.
this service.
Phone number for service centre not Set service centre (p. 40).
set or incorrect.
SIM card contract does not support Contact your service provider.
this service.
Service centre overloaded.
Repeat message.
Check.
Recipient does not have a
compatible phone.
EMS pictures and
Destination phone does not support
sounds not displayed the EMS standard.
at destination phone.
No Internet access
possible.
Incorrect WAP profile set, or wrong Check settings or contact your service
or incomplete settings.
provider.
PIN error / PIN2 error. Three wrong entries.
Enter the PUK (MASTER PIN) supplied
with the SIM card according to the
instructions. If the PUK (MASTER PIN) has
been lost, contact your service provider.
Phone code error.
Three wrong entries.
Contact Siemens Service (p. 69).
Contact your service provider.
Service provider
code error.
No authorisation for this service.
Too few/too many
menu entries.
Functions may have been added or Check with your service provider.
deleted by the service provider via
the SIM card.
No fax possible.
Wrong settings in the PC.
Check settings.
No authorisation for this service.
Charge pulse is not transmitted.
Contact your service provider.
Contact your service provider.
Charge meter does
not work.
Damage
Severe shock.
Remove battery and SIM and re-insert them. Do not dismantle the phone!
Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry
connector contacts thoroughly. Stand phone upright in an air current. Do not
dismantle the phone!
74
Care and maintenance
Your phone has been designed and
manufactured to the highest of
standards and should be treated
with great care and attention. The
suggestions below will help you to
enjoy your phone for many years.
The suggestions given above apply
equally to your phone, battery,
charger and all accessories. If any of
these parts are not working properly,
take them to your nearest qualified
service outlet. The personnel there
will assist you and, if necessary, re-
pair the device.
ance
• Protect your phone from moisture
and humidity! Precipitation, hu-
midity and liquids contain miner-
als that will corrode electronic
circuits. Nevertheless, should your
phone become wet, disconnect it
immediately from the power sup-
ply and remove the battery!
• Do not use or store the phone in
dusty, dirty areas. Its moving parts
may become damaged.
• Do not store your phone in hot ar-
eas. High temperatures can short-
en the life of electronic devices,
damage batteries and warp or
melt certain plastics.
• Do not store your phone in cold ar-
eas. When the phone warms up
again (to its normal ambient tem-
perature), moisture can form in-
side the phone, which may
damage electronic circuit boards.
• Do not drop, knock or shake your
phone. Rough handling can dam-
age internal circuit boards!
• Do not use harsh chemicals, clean-
ing solvents, or strong detergents
to clean the phone!
75
Product data
data Declaration of conformity Operating time
Siemens Information and Communi-
cation mobile hereby declares that
the phone described in this user
guide is in compliance with the es-
sential requirements and other rele-
vant provisions of European Direc-
tive 1999/5/EC (R&TTE).
The operating time depends upon
the respective conditions of use: Ex-
treme temperatures considerably re-
duce the phone’s standby time.
Avoid placing the phone in the sun
or on a heater.
Standby time: up to 140 hours
Call time: up to 270 minutes
The declaration of conformity (DoC)
concerned has been signed. Please
call the company hotline if you re-
quire a copy of the original.
Phone ID
You will need the following details if you
lose your phone or SIM card. Please enter
here:
the number of the SIM card (on the card):
..............................................................
15-digit serial number of the phone (under
the battery):
..............................................................
the customer service number of the service
provider:
Technical data
GSM class:
Frequency range: 880 - 960 MHz
GSM class:
Frequency range: 1710 -1880 MHz
4
1
..............................................................
Weight:
87 g
Lost phone
If you lose your phone or SIM card contact
your service provider immediately to
prevent misuse.
Size:
98 x 49 x 20 (mm)
750 mAh
Li-ion battery:
Operating temp.: –10 °C to +55 °C
SIM card: 3 volt
76
Accessories
ries
Basics
Li-ion battery 750 mAh
(V30145-K1310-X268-1)
Spare battery for increased standby and call
times
Standard charger
(V39197-F5061-F842-1) Euro
(V39197-F5061-F843-1) UK
Ideal as a spare or second charger when
travelling.
Headset PTT
Headset with PTT key to accept and end
calls
(S30880-S6851-A500-*)
Original Siemens Accessories
77
Battery quality statement
The capacity of your mobile phone
battery will reduce each time it is
charged/emptied. Storage at too
high or low temperatures will also
result in a gradual capacity loss.
As a result the operating time of your
mobile phone may be considerably
reduced, even after a full recharge of
the battery.
nt
Regardless of this, the battery has
been designed and manufactured so
that it can be recharged and used for
six months after the purchase of
your mobile phone. After six
months, if the battery is clearly suf-
fering from loss of performance, we
recommend that you replace it.
Please buy only Siemens original
batteries.
78
Guarantee certificate (UK)
ee Without prejudice to any claim the
• Ownership of devices or compo-
nents replaced by and returned to
Siemens shall vest in Siemens.
• This Guarantee shall apply to new
devices purchased in the Europe-
an Union. For Products sold in the
United Kingdom the Guarantee is
issued by Siemens plc, Siemens
House, Oldbury, Bracknell, Berk-
shire, RG12 8FZ.
• Any other claims resulting out of
or in connection with the device
shall be excluded from this Guar-
antee. Nothing in this Guarantee
shall attempt to limit or exclude a
Customers Statutory Rights, nor
the manufacturer's liability for
death or personal injury resulting
from its negligence.
• The duration of the Guarantee
shall not be extended by services
rendered under the terms of the
Guarantee.
• Insofar as no Guarantee default
exists, Siemens reserves the right
to charge the customer for re-
placement or repair.
user (customer) may have in relation
to the dealer or retailer, the custom-
er shall be granted a manufacturer's
Guarantee under the conditions set
out below:
e
• In the case of new devices and
their components exhibiting de-
fects resulting from manufactur-
ing and/or material faults within
24 months of purchase, Siemens
shall, at its own option and free of
charge, either replace the device
with another device reflecting the
current state of the art, or repair
the said device. In respect of parts
subject to wear and tear (includ-
ing but not limited to, batteries,
keypads, casing), this warranty
shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if
the device defect is attributable to
improper treatment and/or failure
to comply with information con-
tained in the user manuals.
•
This Guarantee shall not apply to
or extend to services performed
by the authorised dealer or the
customer themselves (e.g. instal-
lation, configuration, software
downloads). User manuals and
any software supplied on a sepa-
rate data medium shall be exclud-
ed from the Guarantee.
• The above provisions does not im-
ply a change in the burden of
proof to the detriment of the cus-
tomer.
To invoke this Guarantee, please
contact the Siemens telephone serv-
ice. The relevant number is to be
found in the accompanying user
guide.
• The purchase receipt, together
with the date of purchase, shall be
required as evidence for invoking
the Guarantee. Claims under the
Guarantee must be submitted
within two months of the Guaran-
tee default becoming evident.
79
Guarantee certificate (IRL)
ee Without prejudice to any claim the
chemical, radio interference or
thermal factors (e.g.: micro-
wave, sauna etc.)
e
user (customer) may have in relation
to the dealer or retailer, the custom-
er shall be granted a manufacturer’s
Guarantee under the conditions set
out below:
•
Devices fitted with accessories
not authorised by Siemens
• This Guarantee shall not apply to
or extend to services performed
by the authorised dealer or the
customer themselves (e.g. instal-
lation, configuration, software
downloads). User manuals and
any software supplied on a sepa-
rate data medium shall be exclud-
ed from the Guarantee.
• In the case of new devices and
their components exhibiting de-
fects resulting from manufactur-
ing and/or material faults within
24 months of purchase, Siemens
shall, at its own option and free of
charge, either replace the device
with another device reflecting the
current state of the art, or repair
the said device. In respect of parts
subject to wear and tear (includ-
ing but not limited to, batteries,
keypads, casing), this warranty
shall be valid for six months from
the date of purchase.
• This Guarantee shall be invalid if
the device defect is attributable to
improper care or use and/or fail-
ure to comply with information
contained in the user manuals.
In particular claims under the
Guarantee cannot be made if:
• The purchase receipt, together
with the date of purchase, shall be
required as evidence for invoking
the Guarantee. Claims under the
Guarantee must be submitted
within two months of the Guaran-
tee default becoming evident.
• Ownership of devices or compo-
nents replaced by and returned to
Siemens shall vest in Siemens.
• This Guarantee shall apply to new
devices purchased in the Europe-
an Union. For Products sold in the
Republic of Ireland the Guarantee
is issued by Siemens Ireland Limit-
ed, Ballymoss Road, Sandyford In-
dustrial Estate, Dublin 18 - The
Republic of Ireland.
• Any other claims resulting out of
or in connection with the device
shall be excluded from this Guar-
antee. Nothing in this Guarantee
shall attempt to limit or exclude a
Customers Statutory Rights, nor
the manufacturer’s liability for
death or personal injury resulting
from its negligence.
•
•
•
The device is opened (this is
classed as third party interven-
tion)
Repairs or other work done by
persons not authorised by Sie-
mens.
Components on the printed cir-
cuit board are manipulated
The software is manipulated
Defects or damage caused by
dropping, breaking, lightning
or ingress of moisture. This also
applies if defects or damage
was caused by mechanical,
•
•
80
Guarantee certificate (IRL)
• The duration of the Guarantee
shall not be extended by services
rendered under the terms of the
Guarantee.
• Insofar as no Guarantee default
exists, Siemens reserves the right
to charge the customer for re-
placement or repair.
• The above provisions does not im-
ply a change in the burden of
proof to the detriment of the cus-
tomer.
To invoke this Guarantee, please
contact the Siemens helpdesk on
1850 777 277. This number is also to
be found in the accompanying user
guide.
81
SAR – European Union (RTTE)
INFORMATION ON RF EXPOSURE /
with the European Norm EN 50361.
SPECIFIC ABSORPTION RATE (SAR)
This involves measuring the maxi-
mum value in all frequency bands of
the mobile phone with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during normal operation may be
well below the maximum value. This
is because the phone is designed to
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
n
TTE)
THIS MOBILE PHONE MEETS THE LI-
MITS SET BY THE EU (1999/519/EC)
FOR PROTECTION OF THE HEALTH
OF THE PUBLIC FROM THE EFFECTS
OF EXPOSURE TO ELECTROMAGNE-
TIC FIELDS
These limits are part of comprehen-
sive recommendations for the pro-
tection of the public. The recom-
mendations were developed and
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
The highest SAR value for this model
phone when tested for compliance
against the norm is
0.47 W/kg****.
The SAR information can also be
found on the Siemens web site at
While there may be differences
between the SAR levels of various
phones and at various positions, all
Siemens products meet the legal
requirements.
Before a radio equipment may be
placed on the market, compliance
with the European laws and the re-
spective technical limit require-
ments must be demonstrated. Only
then the CE mark may be affixed**.
The limit for mobile phones recom-
mended by the Council of the Euro-
pean Union employs a unit of
measurement known as the Specific
Absorption Rate, or SAR. This SAR li-
mit is 2.0 W/kg***. This corresponds
with the requirements of the Inter-
national Commission for Non-Ioni-
zing Radiation Protection ICNIRP and
was adopted into the European
Norm for Mobile Radio Equipment
EN 50360. The SAR of mobile pho-
nes is determined in accordance
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
Further information:
82
SAR – European Union (RTTE)
** The CE mark confirms that the
product is in compliance with the le-
gal requirements of the European
Union as a prerequisite for the pla-
cing on the market and the free mo-
vement of goods within the Euro-
pean internal market.
*** averaged over 10g body tissue.
**** SAR values may vary depen-
ding on national requirements and
frequency bands. SAR information
for different regions can be found at
83
SAR – International (ICNIRP)
ter- INFORMATION ON RF EXPOSURE /
low the maximum value. This is
because the phone is designed to
SPECIFIC ABSORPTION RATE (SAR)
operate at multiple power levels so
as to use only the power required to
reach the network. In general, the
closer you are to a base station, the
lower the power output.
THIS MOBILE PHONE MEETS THE LI-
MITS FOR PROTECTION OF THE
HEALTH OF THE PUBLIC FROM THE
EFFECTS OF EXPOSURE TO ELECTRO-
MAGNETIC FIELDS
The highest SAR value for this model
phone when tested for use at the
ear is
Your mobile phone is a radio trans-
mitter and receiver. It is designed
and manufactured not to exceed the
limits for exposure to radio frequen-
cy (RF) energy recommended by in-
ternational guidelines from the In-
ternational Commission on Non-
Ionizing Radiation Protection (IC-
NIRP). These limits are part of com-
prehensive guidelines for the protec-
tion of the public and establish
0.47 W/kg***.
SAR information can also be found at
While there may be differences bet-
ween the SAR levels of various pho-
nes and at various positions, they all
meet the international guidelines for
safe RF exposure.
permitted levels of RF energy for the
population. The guidelines were
confirmed by independent scientific
organisations through periodic and
thorough evaluation of scientific stu-
dies*. The limits include a substanti-
al safety margin designed to assure
the safety of all persons, regardless
of age and health.
* The World Health Organization
(WHO, CH-1211 Geneva 27, Switzer-
land) states that present scientific in-
formation does not indicate the
need for any special precautions for
use of mobile phones.
The exposure limit for mobile pho-
nes employs a unit of measurement
known as the Specific Absorption Ra-
te, or SAR. The SAR limit stated in the
international guidelines is 2.0 W/
kg**. Tests for SAR are conducted in
all frequency bands using standard
operating positions with the phone
transmitting at its highest power le-
vel. The actual SAR level of the pho-
ne during operation can be well be-
Further information:
** averaged over 10g of tissue.
*** SAR values may vary depending
on national requirements and fre-
quency bands. information for diffe-
rent regions can be found at
84
A
Composer ...................................51
All calls (call time/charge) ........... 28
All calls (diversion)...................... 57
Auto key lock.............................. 52
Auto redial.................................. 16
B
CSD settings................................56
Battery
Quality declaration.................. 77
C
Calculator................................... 65
Call
Hold ....................................... 17
Menu...................................... 19
Multiparty............................... 18
Dialling codes .............................15
Display
Display settings .......................51
Symbols ....................................7
Inbox
Downloads ................................. 35
DTMF codes (control codes)........ 19
SMS ........................................38
Internet ......................................54
E
E-mail
Write ...................................... 45
L
Loss of phone, SIM card...............75
F
Fast access key ........................... 61
G
GPRS .......................................... 55
Menu
H
Home network............................ 55
Microphone muting ....................19
MMS
Write.......................................41
Multiparty...................................18
Muting (microphone)..................19
I
Identity number (IMEI)................ 52
Illumination display .................... 51
IMEI number............................... 52
86
Index
N
Network
Reset factory setting....................52
network
Line ........................................ 54
Service centre (SMS) ...................40
O
Operating time ........................... 75
P
Photo album............................... 30
PIN
Shown in the display .....................7
SIM services ................................14
SIM services (optional) ................14
Prompt ....................................... 16
PUK, PUK2 .................................. 12
Q
R
Receiving data ............................ 57
Receiving fax .............................. 57
SMS
Voice message ............................48
Speed keys ................................. 61
Switch off phone
WAP profiles................................33
WAP push setting ........................34
World clock .................................64
Manually................................. 10
Switch on ................................... 10
T
T9
Text entry without T9 ................. 20
U
V
Voice command.......................... 67
Voice control .............................. 66
Voice dialling.............................. 66
|