Siemens S75 User Manual

issued by

BenQ Mobile GmbH & Co.OHG

Haidenauplatz 1

D-81667 Munich

BenQ Mobile GmbH & Co.OHG

Rights of modification reserved.

Manufactured by BenQ Mobile GmbH & Co.OHG

under trademark license of Siemens AG

www.siemens.com/s75

Designed for life

S75

Table of Contents

Safety precautions ..................... 3

Phone overview ......................... 6

Display symbols ......................... 8

Getting started ......................... 10

Inserting SIM card/

Contacts ....................................30

All contacts ............................3 0

Groups ...................................31

Online status ..........................3 1

SIM ........................................3 2

Filter ......................................3 2

General options ......................33

Call records ...............................35

Time/charge ..............................3 6

Camera .....................................3 7

SMS/MMS ..................................40

Writing an SMS .......................40

Writing an MMS ......................4 2

Receive ..................................43

Reading ..................................44

Draft ......................................45

Outbox ...................................4 5

Sent .......................................45

Archive ...................................4 5

Templates ..............................45

SMS settings ...........................45

MMS settings .........................4 7

Save after send .......................4 8

Text zoom ..............................48

Em oticons ..............................4 8

E-mail ........................................4 9

Writing/sending ......................49

Receiving/reading ...................5 0

Draft ......................................51

Archive ...................................51

Setting ...................................51

battery ................................... 10

RS MultiMediaCard ................. 11

Charging the battery .............. 12

Switching on/off, PIN entry ...... 13

General instructions ................ 14

Standby mode ....................... 14

Receiving signal ..................... 14

Digital Rights Mgmt. (DRM) .... 14

Main menu ............................ 15

Tabs ...................................... 15

Menu controls ........................ 16

Centre key ............................. 16

Standard functions ................. 17

Security .................................... 18

Text input ................................. 20

Calling ...................................... 24

Ending a call .......................... 24

Setting the volume ................ 24

Accept call ............................. 25

Rejecting a call ....................... 25

Handsfree .............................. 26

Swapping between 2 calls ...... 26

Conference ............................ 27

Call options ............................ 28

Direct call ............................... 28

Tone sequences (DTMF) ......... 29

end

See also Index at the end of this User Guide

Table of Contents

WAP push ................................. 53

Inst. message ........................... 54

Voice mailbox/Mailbox ............ 59

CB services ............................... 60

Internet .................................... 61

Setup ........................................ 64

Profiles .................................. 64

Ringtones .............................. 66

Themes .................................. 67

Display ................................... 68

Vibration ................................ 69

Phone Pilot ............................ 70

Connectivity .......................... 71

Shortcuts ............................... 76

Call setup ............................... 78

Phone setup ........................... 80

Clock ..................................... 83

Security ................................. 84

Network ................................ 86

Accessories ............................ 88

Organiser ................................. 90

Calendar ................................ 90

Appointments ........................ 91

Tasks ..................................... 93

Notes ..................................... 93

Dictat.machine ...................... 94

Time zones ............................ 95

Remote synchronisation ......... 96

Extras ........................................9 8

SIM services (optional) ...........9 8

My applications ......................9 8

Calculator ...............................9 8

Unit converter ........................9 9

Online status ........................1 00

Sound recorder .....................1 02

Stopwatch ............................103

Countdown ..........................1 03

Date calculator .....................1 04

My menu ..............................1 04

Alarm clock .............................1 05

Media player ...........................1 06

My stuff ..................................1 09

Mobile Phone Manager ..........1 12

Questions & Answers .............1 15

Customer Care ........................1 19

Care and maintenance ...........1 21

Product data ...........................1 22

Accessories .............................1 23

Guarant ee certificate (UK) .....1 25

Guarant ee certificate (IRL) .....1 26

SAR .........................................1 27

Licence Agreement ................128

Menu tree ...............................132

Index .......................................138

end

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with legal

requirements and local restric-

tions when using the phone.

For example in aeroplanes,

petrol stations, hospitals or

while driving.

Do not look at the LED (e.g. ac-

tivated infrared port, flash LED)

with optical magnifiers because

of radiation.

This product complies with

IEC/EN 60825-1 “Safety of

Laser Products” for LED Class

1M products; such products are

safe under reasonably foresee-

able operating conditions.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids or

pacemakers. Keep at least

20 cm/9 inches between phone

and pacemaker. When using

the mobile phone hold it to the

ear which is further away from

the pacemaker. For more infor-

mation consult your doctor.

Do not place the phone near to

electromagnetic data carriers

such as credit cards and floppy

disks. Information stored on

them could be lost.

Small parts such as the SIM

card, sealing stop, lens ring

and lens cap can be dismantled

and swallowed by small chil-

dren. The phone must there-

fore be stored out of the reach

of small children.

The ringtones (p. 66), info

tones (p. 80) and handsfree

talking are reproduced through

the loudspeaker. Do not hold

the phone to your ear when it

rings or when you have

switched on the handsfree

function (p. 26). Otherwise you

risk serious permanent dam-

age to your hearing.

The mains voltage specified on

the power supply unit (V) must

not be exceeded. Otherwise

the charging device may be

destroyed.

The power supply must be

plugged into an easily accessi-

ble AC mains power socket

when charging the battery. The

only way to turn off the charging

device after charging the bat-

tery is to unplug it.

Only use original Siemens bat-

teries (100 % mercury-free)

and charging devices. Other-

wise you risk serious damage

to health and property. The bat-

tery could explode, for in-

stance.

Safety precautions

You may only open the phone

to replace the battery (100 %

mercury-free) or SIM card. You

must not open the battery un-

der any circumstances. All oth-

er changes to this device are

strictly prohibited and will inval-

idate the guarantee.

Use only Siemens original ac-

cessories. This will avoid po-

tential risks to health or

property and ensure compli-

ance with all relevant regula-

tions.

Improper use will invalidate the guarantee!

These safety instructions also apply to

Siemens original accessories.

All electrical and electronic

products should be disposed of

separately from the municipal

waste stream via designated

collection facilities appointed

by the government or the local

authorities.

As mobile devices offer a range of func-

tions, they can be used in positions other

than the head, such as on the body. In this

case, separation distance of 1.5 cm is

required.

This crossed-out wheeled bin

symbol on the product means

the product is covered by the

European Directive

Bluetooth

Your phone has a Bluetooth interface. This

makes it possible to establish a wireless con-

nection of your phone with a headset of a car

kit, or with other Bluetooth-enabled devices.

In order to establish a secure link between

the devices and to prevent a third party from

having access to your phone, you should ob-

serve the following points:

2002/96/EC.

The correct disposal and sepa-

rate collection of your old appli-

ance will help prevent potential

negative consequences for the

environment and human

health. It is a precondition for

reuse and recycling of used

electrical and electronic equip-

ment.

• The initial connection between two devic-

es, what is called "pairing", should take

place in familiar surroundings.

For more detailed information

about disposal of your old ap-

pliance, please contact your

city office, waste disposal serv-

ice or the shop where you pur-

chased the product.

• Both devices must be able to identify

themselves one time by using a pass-

word/PIN. To ensure sufficient security,

you should choose a 16-digit number com-

bination for a password that would be diffi-

cult to guess (if a PIN has not been

assigned).

• An automatic connection acceptance

("connection without confirmation") should

only be used in exceptional cases.

• In general, only trustworthy devices should

be linked in order to minimize security

risks.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Safety precautions

• You should restrict the "visibility" of your

phone if possible. This will make it much

more difficult for unknown devices to es-

tablish a connection with your phone. To

do this, in the Bluetooth menu, set the op-

tion Visib.to others of Always visible to

Not visible (p. 74).

• The name of your phone is transmitted in

a Bluetooth connection. The factory de-

fault is the "Bluetooth ID". The first time

Bluetooth is activated, or later in the

Bluetooth menu, you can change this

name (My BT name, page 74).

• If Bluetooth is not needed, this function

should be deactivated.

Before using Bluetooth accessories, or a

mobile phone inside a vehicle, check the ve-

hicle user guide for any limitations on the use

of these products.

Phone overview

Softkeys

Navigation keys

In standby mode:

The current functions of these keys are

shown as §text§/symbol (e.g.

Open user profiles.

Open contacts.

Open inbox.

Call key

Dial displayed/highlighted phone num-

bers/names, take calls. In standby

mode, show last phone numbers

dialled.

Start the camera.

In lists, messages and menus:

On/Off/End key

Scroll upwards/downwards.

During the conversation:

• Switched off: press to switch on.

• During a conversation or in an appli-

cation: press briefly to end.

• In menus: return to standby mode.

• In standby mode:

Open Contacts.

press and hold to switch off the

phone; press briefly: switch-off

menu.

Media player key

Direct number for the media player.

Wildcard key

Key for Internet access unless other-

wise preconfigured.

£ ß

01.05.2005

10:10

Service provider

Centre key

Inbox

NewSMS

Press the centre key to open the

main menu and to start an appli-

cation or function (page 16).

Phone overview

Integrated antenna

Loudspeaker

X Camera key

Media player activated:

£ ß

Play/pause.

01.05.2005

10:10

Media player deactivated:

Play.

Service provider

[ / \ Volume control

Display

Infrared interface (IrDA)

Inbox

NewSMS

Ringtone

• Press and hold in standby mode:

switch all acoustic signals on/off

(except alarm clock).

• Press and hold on incoming call:

switch off ringtone for this call only.

Key lock

Press and hold in standby mode:

activate/deactivate key lock.

Plug socket

Slot for RS MultiMediaCard

Car Kit holder

Flash/torch

X Press and hold key:

switch torch on/off.

Connection for external antenna

Camera lens

Mirror

Display symbols

Display symbols (selection)

Alarm set

Signal strength

Keypad locked

Charging

Text input with T9

Activated and available

Registered

T9Abc

Battery charge level, e.g. 50 %

Contacts

Call records

Temporarily interrupted

Browser offline

Internet/Service provider portal

Games

Browser is being connected

Browser online via GPRS

No network (Internet)

IrDA activated

Organiser

Messages

Camera

Extras

IrDA transmission

Bluetooth activated.

Bluetooth visible to others

Media player

My stuff

Alarm clock

Bluetooth during data

transmission

Setup

Call accepted on Bluetooth

device

All calls are diverted

Ringer (beep) off

Display symbols

Camera symbols

Events (selection)

SMS memory full

Zoom factor

MMS memory full

Phone memory full

No network access

Inbox

White balance

Flash activated

Memory assistant

Message symbols (selection)

Unread

Read

Draft

Sent

MMS not sent

MMS notification received

MMS with DRM contents

(page 14)

E-mail forwarded

E-mail with attachment

Voice mail received

Getting started

Your phone's display is covered with

a protective film. Remove this before

using the phone.

In rare cases static

discharge can

cause temporary

discoloration in

the display.

However, this

will disappear

within approx.

10 minutes.

• Insert the battery sideways into

^{the phone}2, then press it down-

^wards3until it engages.

Inserting SIM card/

battery

The service provider supplies you

with a SIM card on which all the im-

portant data for your line is stored. If

the SIM card has been delivered in

credit-card size, snap the smaller

segment out and remove any rough

edges.

• To remove, press the retaining tab

on the side of the battery, then lift

the battery out.

• Place the SIM card in front of the

slot with the contacts facing

downwards. Then push the SIM

card fully into the holder using

^{gentle pressure}1. Ensure that

the chamfered corner is in the cor-

rect position.

Getting started

• Insert the battery cover beneath

^{the camera lens}4with the re-

taining lugs at the top, and then

^{press down at the back}5 until it

clicks into place.

RS MultiMediaCard™

• To insert, lay the card in the carry-

^{ing tray}1(ensure that the cham-

fered corner is in the correct

position). Push the carrying tray

with the card into the phone until

^{it clicks into place}2.

• Press the small button to remove

3 (e.g. with a pin). The card tray

will pop out a little and you can

remove it.

• To remove, lift the battery cover

^{up and off}6.

• Before removing the

RS MultiMediaCard, call up the

Eject card function in the options

menu for My stuff. This saves data

you have not yet saved and avoids

losing data.

Additional information

Please switch off your phone before re-

moving the battery!

1.8 and 3 volt SIM cards are supported.

Please contact your service provider if you

have a different card.

Getting started

Extreme temperatures considerably

reduce the phone’s standby time.

You should therefore avoid the leav-

ing the phone in the sun or on a

radiator.

Charging the battery

Charging

The battery is not fully charged

when delivered. Plug the charger ca-

ble into the bottom of the phone,

plug the power supply unit into a

mains power socket and charge for

at least two hours (for charging via

USB, see page 89). Do not interrupt

the charging procedure

Talktime: up to 300 minutes

Standby time: up to 300 hours

Charge icon not visible

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case the battery

is fully charged after 3 to 4 hours.

prematurely.

Only use the plug-in power supply unit

included in delivery!

Display during operation

Charge level display during

operation (empty–full):

Display when charging is

in progress.

Ý Þ ß

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly af-

ter an uninterrupted charging/dis-

charging cycle. You should therefore

not remove the battery unnecessarily

and where possible not terminate the

charging process before completion.

Charging time

An empty battery is fully charged af-

ter about 2 hours. Charging is only

possible within a temperature range

of +5 °C to +45 °C. If the tempera-

ture rises/falls 5 °C above/below this,

the charge symbol flashes a warn-

ing. The mains voltage specified on

the power supply unit must not be

exceeded.

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Operating time

The operating time depends upon

the respective conditions of use.

Switching on/off, PIN entry

Switching on/off

Switching your phone on

for the first time

Press and hold the

On/Off/End key.

Time/date

Set the clock correctly once when

getting started.

Entering PIN

The SIM card can be protected with a

4 to 8-digit PIN.

Confirm.

Enter the PIN using the

Start entry.

number keys. The charac-

ters

appear in the

****

First enter the date

display to ensure nobody

can read your PIN. Correct

with ] .

(day/month/year), then

the time (24 hours, in-

cluding seconds).

§OK§

Press the left softkey to

confirm. Logging on to

the network will take a

few seconds.

Confirm. The time and

date are updated.

Time zones

Additional information

Changing the PIN.........................page 18

Clearing SIM card barring ............page 19

Select the city in the de-

sired time zone.

Confirm.

Emergency number

(SOS)

Only to be used in real emergencies!

By pressing the left softkey §SOS§ you

can make an emergency call on any

network without a SIM card and with-

out entering a PIN (not available in

all countries).

General instructions

Standby mode

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the

display.

User guide

Symbols

The following symbols are used to

explain operation:

Press the On/Off/End key

Enter numbers or letters.

to return to standby mode

from any situation.

On/Off/End key

Receiving signal

Call key

< >

Strong receiving signal.

Softkeys

A weak signal reduces the

call quality and may lead

to loss of the connection.

Change your location.

Displays a soft-key

function.

§Menu§

Press the centre key, e.g.,

to call up the menu.

Digital Rights Mgmt.

(DRM)

Press the navigation key

on the side marked with a

triangle.

D F E

H I G

Remember that your phone has Dig-

ital Rights Management. The use of

downloaded pictures, sounds or ap-

plications can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only,

number of times it can be used etc.

(page 81).

Function dependent on

service provider. May re-

quire special registration.

General instructions

Main menu

The applications are shown with

symbols in the main menu:

Tabs

The handy tabs offer you fast access

to information and functions.

Call up from standby

2 3

mode using the

centre key.

Select application with

the navigation key.

Start application.

Main menu options

Navigation

§Options§

Open menu.

Switch between the indi-

vidual tabs.

List output of the menu. En-

tering letters will access a

function directly.

If an input field is activated on a tab,

it is only possible to navigate within

the field using the navigation key.

Big letters

Illumination

Eject card

Select one of two font

sizes.

To switch to the next tab,

quit the input fields by

Set display light brighter/

darker.

scrolling up or down.

Starts data backup before

the RS MultiMediaCard is

removed.

Help

Display a help text.

General instructions

Menu controls

The steps needed to reach a function

are shown in a condensed form in the

user guide, e.g. to display record of

missed calls in condensed form:

Centre key

The symbol in the centre of the low-

er line of the display shows the cur-

rent function when the centre key is

pressed.

¢Calls dialled

Main menu

OK, confirm

Change

Call

This comprises the following steps:

Pressing the centre key

opens the main menu in

standby mode.

Select the record

^applicationP ^.

Edit

Confirm with the

Insert

centre key.

Select the

Options

Camera

Send

Calls dialled function.

Confirm with the

centre key.

View

Save

Play

Record

Pause

Stop

Zoom

General instructions

Printing via USB

Standard functions

This Mobile Printing Ready product is

designed to provide easy printing

from mobile phones by connecting

the mobile phone with a USB data

cable to the printer.

Option menus

Functions which appear repeatedly

in the options menu are listed here.

§Options§ Open menu.

This product follows the guidelines

Version 1.0 for PictBridge from Mo-

bile Imaging and Printing Consorti-

um (MIPC).

Edit

Open the entry to edit.

Display entry.

View

Delete

New entry

Sendö

Delete entry.

Highlighting mode

Create new entry.

For some applications (e.g. deleting

several SMS messages) you can

highlight several entries on the tab

in order to perform multiple func-

tions at once.

Selecttransmissionservice

and medium for sending.

Printö

Printout on a suitable termi-

nal via IrDA, Bluetooth or

USB.

§Options§

Open menu.

Reply/

Reply to all

The sender becomes the

recipient, "Re:" is placed

before the subject, and the

received text is transferred

into the new message.

Mark text Activate highlighting

mode.

Select entry/entries.

Save

Store entry.

Highlight or remove

highlighting.

Save to ª

Sort

Save recipient in Contacts.

Additional highlighting functions:

Set sort criteria

(alphabetical, type, time).

§Options§ Open menu.

Rename

Capacity

Import

Rename selected entry.

Display memory capacity.

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Device ready to receive da-

ta (vcard, vcal, vnotes) via

IrDa or Bluetooth.

Delete

marked

All highlighted entries are

deleted.

Attributes

Help

Display properties of the

highlighted object.

Display help text.

Security

¢Security

¢PIN codes

The phone and SIM card are protect-

ed against misuse by several security

codes.

¢Select function.

PIN control

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone.

Some service providers do not per-

mit deactivating the control.

Keep these security codes in a safe

place where you can access them again

if required.

PIN codes

Protects your SIM card

(personal identification

number).

Edit.

Enter PIN.

PIN2

This is needed to set the

charge detail display and to

access additional functions on

special SIM cards.

Confirm entry.

Change PIN

You can change the PIN to any

4 to 8-digit number you find easier

to remember.

PUK

PUK2

Key code. Used to unlock SIM

cards after the wrong PIN has

been entered repeatedly.

Edit.

Phone

code

Protects your phone. Must be

entered at the first security

setting.

Enter current PIN.

Confirm.

Enter new PIN.

_,ì

Repeat new PIN.

Security

Preventing accidental

activation

Even if PIN use is deactivated

(page 13) confirmation is required

to switch on the phone.

¢Security

¢PIN codes

¢Select function.

Change PIN2

Proceed as for Change PIN.

This prevents the phone from being

switched on accidentally, e. g. when

carried in a pocket or whilst you are

on an aircraft.

Chg. phonecode

(Change phone code)

You define the phone code

(4 to 8-digit number) the first time

you call up a phone-code protected

function (e.g. Direct call, page 84).

It is then valid for all phone-code

protected functions.

Following the third incorrect at-

tempt, access to the phone code and

the functions that use it is denied. If

this happens please contact Siemens

Service (page 119).

Press and hold.

§OK§

Press. The phone

switches on.

§Cancel§

Press (or no further input)

to stop switch-on proce-

dure. The phone does not

switch on.

Connection with PCs

You can connect your phone to a PC

using Bluetooth, an IrDA link, or a da-

ta cable (accessories). The PC pro-

gram MPM (Mobile Phone Manager)

enables you to store data on your PC

and, for example, synchronise the

Addressbook with Outlook®,

Clearing SIM card

barrings

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the

SIM card in accordance with the in-

structions. If the PUK (MASTER PIN)

has been lost, please contact your

service provider.

Lotus Notes™ and other Siemens

phones (including Gigaset). You will

find Mobile Phone Manager on the

CD-ROM supplied or you can down-

load it from the Internet at:

www.siemens.com/s75

Text input

Press briefly: special char-

Text input without T9

acters are displayed.

Press the number key repeatedly un-

til the required character appears.

After a brief interval the cursor will

advance. Example:

Press and hold: open text

input menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Press and hold: write 0.

Press once briefly to write

the letter a, twice to write

b etc.

Inserts a space. Press

twice = line break.

Press and hold to write the

number.

Ä, ä, 1–9 Umlauts and numbers

are displayed after the

relevant letters.

Special characters

Press briefly. The symbols

chart is displayed:

Press briefly to delete the

letter before the cursor,

press and hold to erase the

whole word.

]

)

’

;

{

(

)

[

]

}

€

@ \

Move the cursor

(forward/back).

∆

Θ Λ

Press briefly: swap be-

tween abc, Abc, abc,

Φ Ψ Ω

Abc, 123. Status shown

) Line break

in top line of the display.

Scroll to a character.

Confirm.

I F

Press and hold: all input

variants are displayed.

Text input

T9 Text Input is licensed under one or more of

the following: U.S. Pat. Nos. 5,187,480,

Text input menu

For text input:

5,818,437, 5,945,928, 5,953,541, 6,011,554,

6,286,064, 6,307,548, 6,307,549, 6,636,162 and

6,646,573; Australian Pat. Nos. 727539, 746674

and 747901; Canadian Pat. Nos. 1,331,057,

2,302,595 and 2,227,904; Japan Pat. No.

3532780, 3492981; United Kingdom Pat. No.

2238414B; Hong Kong Standard Pat. No.

HK1010924; Republic of Singapore Pat. No.

51383, 66959 and 71979; European Pat. Nos.

0 842 463 (96927260.8), 1 010 057 (98903671.0),

1 018 069 (98950708.2); Republic of Korea Pat.

Nos. KR201211B1 and KR226206B1; People’s

Republic of China Pat. Application Nos.

Press and hold. The text in-

put menu is displayed:

Input language

Mark text

Copy/Insert

Text input withT9

"T9" deduces the correct word from

the individual key entries by making

comparisons with an extensive

dictionary.

98802801.8, 98809472.X and 96196739.0;

Mexico Pat. No. 208141; Russian Federation Pat.

No. 2206118; and additional patents are pending

worldwide.

Writing with T9

The display changes as you proceed.

T9 word suggestions

If several options are found in the

dictionary for a key sequence (a

word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

It is therefore best if you finish a word

without looking at the display.

Simply press the keys once only

where the relevant letter is located.

For "hotel", for example:

Press briefly for T9Abc,

then

The word must be §highlighted§. Then

press

The displayed word is re-

4 6 8 3 5

placed with a different

word. If this word is also

incorrect, press again.

A blank ends a word.

Do not use special characters such as

Ä. Use the standard characters in-

stead, e.g. A; T9 will do the rest

for you.

Repeat until the correct

word is displayed.

If the word you want is not in the

dictionary, it can also be written

without T9.

Text input

To add a word to the dictionary:

§Spell§ Select.

Additional information

Within a "T9 word", individual letters may

not be edited without first removing the T9

status. In most cases it is better to rewrite

the complete word.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Set a full stop. The word is

concluded if it is followed by a

space. Within a word, a full

stop represents an apostro-

phe or hyphen:

Correcting a word

Move left or right, word

by word, until the

e.g. §provider.s§ = provider’s.

required word is

§highlighted§.

Moving the cursor to the right

ends the word.

Scroll through the T9

Press briefly: swap between:

word suggestions again.

abc, Abc, abc, Abc,

123. Status shown in top line

of the display.

]

Deletes the character to

the left of the cursor and

displays a new possible

word!

Press and hold: all input vari-

ants are displayed.

Press briefly: select special

characters (page 20).

Press and hold: opens text

input menu (page 21).

Text input

Using text modules

Text modules

From text modules:

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS, e-mail).

¢M ¢Templates

¢Text modules

Select text module from

the list

¢M ¢Templates

¢Text modules

§New§

Select.

Create message

Select.

The input field is

opened.

Select the type of mes-

sage in which the text

module is to be used.

Write text, select with

§Options§ or, if applicable,

select input language and

copy or insert texts.

Confirm. The text module

is added.

Complete the message

and send.

Save text module.

From an application (SMS, MMS, e-mail):

Write the text for the mes-

sage in the application.

§Options§ Open the text menu.

Insert text Select, then Text modules.

Select text module from

the list.

Confirm. The text module

is added.

Calling

Dialling with number

keys

Ending a call

Press briefly. Press this key

even if the person on the

other end of the line has

hung up first.

The phone must be switched on

(standby mode).

Enter number (always

with area/international

Setting the volume

dialling code).

Adjust the volume with

the plus/minus keys (only

possible during a call).

] A short press clears the

last digit, a long press

clears the entire number.

[

If a Car Kit is used, its volume setting

will not affect the usual setting on

the phone.

Press the Call key. The dis-

played phone number is

dialled.

International dialling codes

Redialling

Press and hold until a "+" is

displayed.

To redial the phone number last

called:

§Options§ Open call menu.

Country Press and select country.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Press Call key the twice.

To redial other phone numbers that

were dialled previously:

Press the Call key once.

Pick out the phone

number from the list,

then press …

… to dial.

Calling

Reminder

§Options§ Open call menu.

If the number is busy

If the called number is busy or can-

not be reached because of network

problems several options are

available (depending on the service

provider). An incoming call or any

other use of the phone interrupts

these functions.

Reminder A beep reminds you to re-

dial the displayed phone

number after 15 minutes.

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Either

Auto last number redial

§Options§ Open call menu.

Press the Call key.

Auto dial The phone number is au-

tomatically dialled ten

times at increasing time

intervals.

Press the centre key.

A phone number transmitted by the

network plus the corresponding

name are displayed if they are stored

in Contacts (page 32).

Confirm. End with:

End key.

Call back

§Options§ Open call menu.

Rejecting a call

§Reject§

Press.

Call back Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

Press briefly.

Confirm.

Warning!

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Calling

Handsfree

Swapping between

2 calls

You can put the phone down during

a call. You can then hear the caller

via the loudspeaker.

Establishing a second

connection

§Options§ Open call menu.

Handsfr. Activate/deactivate

You can call another number during

a call.

handsfree talking.

§Options§ Open call menu.

Confirm.

Hold

The current call is put on

hold.

Warning!

Always switch off "handsfree talking" before

holding the phone to your ear. Otherwise

you will damage your hearing!

Confirm.

Enter new phone number

call up Contacts

open call records and

select a phone number.

When the new connection is

established:

§Options§ Open call menu.

Swap

Swap between calls.

Confirm.

Incoming calls during a call

You may need to register for this

service with your service provider

and set your phone accordingly. Dur-

ing a call, you may be advised that

there is another call waiting. You will

hear a special tone during the call

(page 78). You have the following

options:

Calling

• Accept the waiting call in addition to

Conference

the first

You can call up to 5 conference par-

ticipants one after the other and

then link them together in a confer-

ence call. Some of the functions de-

scribed may not be supported by

your service provider or may have to

be enabled specially.

§Swap§

Accept the waiting call

and place the current call

on hold.

Always proceed as above to swap be-

tween the two calls.

• Reject the waiting call

A connection has already been

established:

§Reject§

Press.

§Options§ Open menu and select

Hold. The current connec-

tion is maintained.

§Divert§

The waiting call is divert-

ed, for example,

to mailbox.

Select phone number

from Contacts or enter it

manually.

• Accept the waiting call and end the

current call

End the current call.

When the new connec-

tion is established …

Accept the new call.

§Options§ … open the menu and se-

lect Conference. The held

call is joined.

End call(s)

Press briefly.

Repeat procedure until all partici-

pants are linked together (up to

5 participants).

After the Return to held call? display,

you have the following choice:

Ending

§Yes§

§No§

You accept the call on

hold.

All calls in the conference

finish simultaneously

when the End key is

pressed.

You end the second call

too.

Calling

Call options

The following functions are only

available during a call:

Direct call

If this is active, only one number can

be dialled.

§Options§ Open menu.

Switching on

Hold

Hold current call.

¢Security

Microphone

If switched off, the person

on the other end of the line

cannot hear you (muting).

¢Direct call

Confirm selection.

Enter phone code.

Also: press * and

hold.

Handsfree

When first prompted you define and

enter the phone code (4 - 8 digits).

Please do not forget this code (page 19)!

Playback through the

loudspeaker.

Conference

Time/charge

(p. 27)

Confirm selection.

Display talktime that has

elapsed so far and (if set)

cost incurred during the

call.

Select phone number

from Contacts or enter it

manually.

Send DTMF

Enter tone sequences

(numbers) for remote in-

quiries to an answering

machine.

Confirm.

Applying

To dial the phone number

(e.g. "Carol") press and

hold the right softkey.

§Carol§

Main menu

Access to main menu.

Call transfer

Connect the original call to

a second call. For you,

both calls are now ended.

Call status

List all held and active

calls (e.g. participants in a

conference).

Calling

Switching off

Using Contacts

Store phone numbers and tone se-

Press and hold.

quences (DTMF tones) in Contacts in

the same way as a normal entry.

Enter phone code.

Confirm entry.

Enter phone number.

Press until a "+" appears

Tone sequences (DTMF)

in the display (wait for

the connection to be

established).

You can, for example, enter tone se-

quences (digits) for remote access to

an answering machine during an ex-

isting connection. These entries are

transmitted directly as DTMF codes

(tone sequences).

Enter DTMF tones (digits).

If necessary, wait again

for three seconds at a

time for the receiver to

process the entries

correctly.

§Options§ Open menu.

Send DTMF

Select.

Enter a name.

§Save§

Enter phone number.

Save entry.

Confirm.

You may also store just the

DTMFtones (digits) and then send

them during the call.

Contacts

¢L

All contacts

Display all entries stored in the

phone or on the SIM card in

alphabetical order.

You can store up to 5000 entries in

this phone directory, with several

phone and fax numbers plus addi-

tional address details.

For fast access, the contacts and

functions are sorted and offered on

five tabs:

New entry

Confirm New entry. The

tabs for creating the entry

All contacts, Groups, Online status, SIM,

Filter

are displayed.

Switch between the

individual tabs.

Open Contacts (fast ac-

cess in standby mode).

The following tabs are offered:

Switch between the

individual tabs.

General

sett.

First name, surname and im-

portant phone numbers. A

ringtone, a picture, or video

with sound can be assigned

to each contact.

Communication

Select contact.

Private

General address information

and additional communica-

tion numbers such as fax and

e-mail.

Call selected contact.

§Options§ Open menu, then Create

message, to start an In-

Business

Person

Company information, ad-

dress, communication

numbers.

stant Message dialogue.

Personal details such as date

of birth, group membership

and other notes.

Online

status

Contact information for In-

stant Messaging (page 54).

Contacts

In the respective tabs:

Groups

Select required input

You are offered 10 different groups

to enable you to arrange your con-

tacts clearly. You can edit the names

of groups as you wish.

fields.

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Editing group attributes

Select group.

At least one name or one

company must be en-

tered. Always enter

phone number with

dialling code.

§Options§ Open menu and select

Attributes. You can make

the following changes:

Name:, Ringtone:, Picture:

Open options menu and

select Save.

Adding a contact

Contacts may be added to a group

via All contacts.

Viewing/editing entries

Select required entry.

Select contact,

open §Options§ and select

Switch between the

individual tabs.

Add to group.

A contact can only belong to one

group.

Open current tab to edit.

Open options menu.

Online status

Display all contacts for whom a

Instant Messaging address

(WV address) is entered.

Synchronisation

The Siemens MPM (Mobile Phone

Manager, page 112) allows you to manage

contacts using PCs.

Contacts

Change

SIM

Location: SIM/Protected

SIM.

Display all contacts stored on the

SIM card.

On special SIM cards,

phone numbers can be

stored in a protected loca-

tion. PIN2 is required for

editing.

New entry

Confirm New entry, enter

name and phone number,

and select the storage lo-

cation (SIM/protected

SIM).

Record number:

Select an unassigned

number for the entry. It

can be used to dial the

phone number.

Viewing/editing entries

(For standard functions see page 17)

Select required entry.

Filter

Edit entry.

Those entries which match the se-

lected filter criteria are displayed,

e.g. those containing a picture.

Editing menu

§Options§ Open menu.

Most used (default)

Add more

fields

Move SIM card entry to

the phone memory. Now

all tabs are offered for

further entries.

URL

Birthday

Pictures

E-mail

Ringtones

from

contacts

Copy entry/entries from

the phone memory to the

SIM card (reduced

information).

Contacts

General options

Location

§Options§ Different functions are of-

fered depending on the

tab and the current

Switch the storage location of en-

tries between the phone memory

and the SIM card.

situation.

Synchronisatn.

Filter

Only those entries

which match the filter

criteria are displayed.

You can synchronise your mobile

with an organiser stored on the In-

ternet (Remote sync., page 96).

Create

message

Create a message for a

selected contact (SMS,

MMS, e-mail, Instant

Message).

Capacity

Display memory capacity.

Setup

Search IM ID

Internet

Search for assigned In-

stant Message ID.

Sort byö

First name or surname

The URL assigned to

the contact is visited via

the WAP browser.

Spec.

numbers

Display special phone

numbers, yes/no

Alarm time

Period of time before

which you want to be re-

Open

Display phone numbers

for information.

minded of an entry with a

birthday.

Add to †

Store entry in Contacts.

Add entry to a group.

Display name

First name or surname is

displayed.

Add to group

Take a picture, Create picture, video

Record video, and sound information

Record sound, for a contact from

Field setup

Entry Tab:

Setup for fields on a tab.

Tab that is to be shown

first.

etc.

scratch or add from

My stuff.

See below.

(For standard functions see page 17)

Contacts

As business crd

Conference

Define a selected contact as a

business card.

Start a conference with

up to five particpants

highlighted in advance.

The contacts are dialled

one after another.

Business card

Establish a contact as your own

business card to send to a

different GSM-phone.

Import

Set up readiness to receive via IrDA

or Bluetooth.

Add more fields

Move SIM card entry to the phone

memory. Now all tabs are offered for

further entries.

Call records

A caller's phone number is displayed

Up to 500 entries are stored in

the records:

• the caller has switched off the

Calls missed

Hide ID function and

The phone numbers of calls that you

have received but not answered are

stored for call back purposes.

• the network supports the "Caller

Identity" function.

Alternatively, a caller’s name is dis-

played if it is stored in Contacts.

Symbol for missed call (in

standby mode).

Your phone stores the phone

numbers of calls for convenient

redialling.

Press the softkey beneath

the symbol to bring up

the inbox.

Calls received

Accepted calls are listed.

Select record.

Calls dialled

Access to the last numbers you have

dialled.

Open record.

Select phone number.

Dial phone number.

Fast access in standby

mode.

Delete records

The records are deleted.

Display information on

the phone number.

Time/charge

You can display the charges and du-

ration during a call. You can set a

unit limit for outgoing calls.

Charge settings

Currency

¢Time/charge

Enter desired currency.

Last call

Personal rate

(PIN2 prompt)

All outg. calls

All incoming

Enter the currency used as well as

the charge per unit and time.

Remaining units

Select display.

Open area.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

service provider to define a credit

limit after which the phone is barred

for outgoing calls.

Time/charge options

Open menu.

Press.

Reset

Reset the currently select-

ed setting.

Enter PIN2.

Reset values

Reset all settings.

Account limit

Charge

settings

Call up the menu

(see below).

Activate.

Enter number of units.

§Options§ Open menu, then select

Save.

Auto display

Call duration and charges are

displayed automatically.

Camera

A camera with flash is integrated in

the phone. Take photos / record

videos and

The number of photos that can still

be taken in the selected resolution is

displayed in the preview image. This

number varies considerably depend-

ing on the subject matter and how

much storage space is required. You

will also see an indication of the

selected resolution or, if video mode

has been selected, there is an indica-

tion as to how much recording time

has already been used and the maxi-

mum time still available.

• use photos as wallpaper, a logo,

screensaver or startup and shut-

down animation

• assign a photo/video to a contact

• send photos/videos via MMS or

e-mail

• save photos in My stuff (page 109)

or on the RS MultiMediaCard

(page 111).

Switch between the Take a

picture and Record video

tabs.

Switching on

Take a picture

Take a photo. A beep is

heard as the photo is tak-

with the plus/minus key in

standby mode.

en (this cannot be

deactivated).

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

If necessary, set the

zoom factor first.

Zoom factor

Night mode

White balance

Flash active.

The photo is saved with a name, the

date and the time in the Pictures

(page 111) folder in My stuff.

To enter the name, see Setup in the

options menu.

Camera

Image resolution

Video resolution

It is possible to set the quality of the

image regardless of the preview im-

age resolution. The best possible res-

olution is 1280 x 960 pixels.

It is possible to set the quality of the

image for a video regardless of the

preview image resolution.

The best possible resolution is

176 x 144 pixels.

To take individual wallpaper images

you need to set Wallpaper as the im-

age resolution in the options.

Flash

The resolution may decrease

depending on the selected digital

zoom.

If the flash is active, a symbol ap-

pears in the display. The flash is

charged constantly when activated.

This reduces the stand-by time.

Additional information

This symbol flashes when

the flash is being charged.

A mirror is integrated in the back of the

phone to make it easier to take self-

portraits.

For settings, see options menu. The

flash performance depends on the

outside temperature and the charge

status of the battery. If the tempera-

ture is low and the battery needs

charging the flash performance

deteriorates.

Record video

The video mode resolution is the

same as the preview image

resolution.

Start video recording.

A red dot appears in the top right of

the display while the video recording

is being made.

End video recording.

The video is saved with a name, the

date and the time in the Videos folder

(page 111) in My stuff.

Camera

Frame

Camera options

Selection of various

decorative frames.

The following functions are availa-

ble, depending on the current

situation.

Self-timer

The photo is taken after a

preset time. For the last

5 seconds, you will hear a

beep each second.

§Options§ Open menu.

Memory

assist.

If there is insufficient

memory available the

memory assistant

is started.

White

balance

Choose between:

Automatic, Indoor,

Outdoor

(For standard functions see page 17)

Pictures

Display list of photos.

Display list of videos.

Archive

¢M ¢Msg. archive

Select account.

Activate access

¢E-mail

Messages are saved in the archive

according to their type and origin.

Select tab and read required

message(s).

Activate an existing

account.

Set access

You can move important messages

to the archive with §Options§, Move to

Archive.

Open menu, then select

Edit. Fill in the access pro-

files as specified by your

service provider.

§Options§

E-mail

User settings

User name:

General sett.

General settings for receiving and

sending.

Your name.

E-mail address:

Your e-mail address,

e.g.:

[email protected]

Download

option

Receive complete e-mail

or only the message

header.

Reply address:

Additional e-mail ad-

dress for replies.

Size limit

Limit size for a receiving

an e-mail in KB.

User ID:

Your user ID.

Leave copy

on serv.:

Leave copy of e-mail on

the server.

Password:

Your password.

Account sett.

See page 74.

Delete option

Delete e-mail on phone

only or also at the server.

Add

signature

A "signature" is attached

to each e-mail. Choose

between: Never, Always,

New messages

Signature

Create signature.

Delivery

report

Request delivery

confirmation.

Read report

Request confirmation that

the message has been

read.

Allow

deliv.rep.

Permit delivery

confirmation.

Allow read

rep.

Permit confirmation that

the message has been

read.

WAP push

WAP push messages are transmitted

from special service centres. If, for

example, you have requested con-

figuration data from your service

provider this will be transmitted via

WAP push.

Message setup

¢M ¢Message setup

¢WAP push

§Options§ Open menu, then select

Settings.

Allow push

Settings to receive WAP

push messages:

Inbox

Allow specific,

¢M ¢WAP push

Allow none, Allow all

Select the required

message.

If Allow specific has been

set, the following lists may

be edited.

Read the message or in-

formation about the

transmitted data/pro-

grams and, if applicable,

trigger a download.

Accept list

Reject list

All messages whose send-

ers are included in this list

are accepted (max.

20 entries possible).

All messages whose send-

er is included in this list are

automatically deleted

Inbox options

Different functions are offered de-

pending on the situation.

(max. 20 entries possible).

Unknown

addr.

Handling of messages

whose senders are neither

in the Accept list nor the

Reject list:

§Options§ Open menu.

Execute

Install

Execute program.

Start installation.

Reject, Delete

Accept/

Reject

Accept/reject message.

Settings

Call up settings.

Inst. message

Conver. history

Read all dialogues from

Inst. message

the last session offline

(deleted next time you

You can chat with dialogue partners

who are also registered for this serv-

ice on your phone or PC. Your part-

ners are entered in contact lists for

this and selected from them for a pri-

vate or group dialogue. Similarly,

you can be invited to a dialogue by

other subscribers.

Settings Settings for applications

and servers.

Automatic login:

Select your preferred

manual or when the

phone is switched on.

GPRS must be switched on.

Start menu (offline)

Timeout:

If Autom. login is activated the main

Set the timeout in

minutes after which Inst.

message is put in the

background if no action is

taken. The session

continues and can be

called up again via the

menu.

overview is displayed immediately.

¢M ¢Inst. message

Start to make a

connection.

Account The access settings are

normallypreconfigured.If

necessary, enter User ID:

and Password: to activate

access.

Pop-up info:

Activate/deactivate pop-

ups for new messages or

change the online status,

for Inst. message only, if

the application is visible.

Please contact your serv-

ice provider if you do not

have access data.

Online status

Call up the Presence

Manager to set your per-

sonal attributes (page 100).

Saved convers.

Access to permanently

saved dialogues.

Inst. message

Dialogues that have taken place

previously are displayed.

Main overview (online)

After you have logged in successful-

ly, depending on your service provid-

er you will see up to 5 tabs as de-

scribed below:

Navigation:

Scroll in the dialogue.

Switch between different

dialogues.

Conversations

IMSG contacts

IMSG groups

Dialogue:

Info messages

Saved convers.

Write text.

Send text.

Naturally, you can also receive mes-

sages from contacts you do not

know. This will be pointed out to you

in the display, and you can either

switch to the dialogue or block the

contact.

Conversations

The following are shown in the list:

• Online contacts with whom a con-

versation is being held.

• Offline contacts to whom a mes-

sage has been sent.

Options

§Options§ Open menu.

• Groups you are registered with.

• Groups that are not connected

and have unread messages.

Different functions are offered de-

pending on the selection and

situation:

• Offline contacts with unread

messages.

Contact

details

Additional information

about the contact.

Starting a dialogue

Select an entry (individual

Group details

Additional information

about the group.

contact or group) for a

dialogue.

Online status

Set your personal

attributes (page 100).

Start dialogue.

Add member

Add a new member.

Look for member.

Search memb.

Invite

Inst. message

IMSG contacts

Invitation to the contacts

in your own group to join

the dialogue.

Display the contact list last used and,

if applicable, entries from Contacts

with Instant Message ID.

Delete

member

Delete contact from the

list of members.

Select an entry in a con-

IMSG contact

tact list for a dialogue.

Save contact in the cur-

rent contact list on the

server.

Start dialogue.

Settings

Settings for auto login.

At the end the offline con-

tacts are displayed, visual-

ly separated and in

Block contact

No more messages are

receivedfromthecontact

and the contact receives

no status information

from you.

alphabetical order.

IMSG contacts options

§Options§ Open menu.

Message to ID

Log out

Enter ID manually.

Different functions are offered de-

pending on the selection and

situation:

The session is ended

and the start menu

displayed.

Only the display is ended

with §Exit§; the session

continues in the back-

ground. New messages

are stored in the Inbox.

To continue the dia-

logue, open the applica-

tion again via the main

menu.

Add contact

User ID:

Enter a unique user

(login) name.

Display name:

Enter your own nickname

for the contact.

contact

Look for the contact in

the contact lists.

(For standard functions see page 17)

Block contact

No more messages are

received from the contact

and the contact receives

no status information

from you.

Delete contact

Delete contact from the

list.

Inst. message

Contact lists

Block list

Add group

Display your personal

contact lists.

Create new contact

list:select New entry and

assign an ID and a name.

Add new group.

Search group

Search for group on the

server (also groups no

longer managed in the

list).

Display the list with re-

jected contacts.

Create group

Group ID:

Enter an unambiguous

group name.

Name:

Name of group.

Topic:

Topic of group.

Searchable:

Other people can look for

the group.

For further functions see page 55.

IMSG groups

Display all groups created by you or

in which you are yourself a member.

Hold dialogue as for IM contacts.

Welcome note:

IMSG groups options

§Options§ Open menu.

Enter own greeting.

Type:

Restricted or open.

Different functions are offered de-

pending on the selection and

situation:

Delete group

Screen name

Delete group.

My name for group

dialogue.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

For further functions see page 55.

Add member

Add new group member.

Search memb.

Search for group

member.

Delete

member

Delete contact from the

group member list.

Inst. message

Info messages

Saved convers.

Display messages such as invitations

to a group, server messages or other

system messages.

Display permanently saved

dialogues.

Display selected dialogue.

Display selected message.

Saved dialogues can be renamed or

deleted via the §Options§ menu.

Reply to

invitation/requests.

To reject, open §Options§ menu and

select Deny.

Voice mailbox/Mailbox

¢M ¢Voice mailbox

Save call divert number

Most service providers provide a

mailbox in which a caller can leave

voice mail for you

Calls are diverted to this phone

number.

¢Call setup

• if your phone is switched off or

not ready to receive,

¢Divert

Select condition,

e.g. Unanswered.

• if you do not want to answer,

• if you are making a phone call

(and if Call waiting page 78 is not

activated).

Confirm change, then se-

lect Set.

Enter phone number.

If the voice mail service is not part of

your service provider's standard

package, you will need to register for

it, and possibly set it manually. The

following sequence may vary from

service provider to service provider.

§Options§ Open, then select Save.

Listen

A new voice message can be an-

nounced as follows, depending on

the service provider:

Setup

Symbol plus beep.

The service provider supplies you

with two phone numbers:

Notification via SMS.

Save mailbox number

Call this phone number to listen

to the voice messages left for you.

You receive a call with an automatic

announcement.

¢M ¢Voice mailbox

Call your mailbox and play the mes-

sage(s) back.

^/J

Select phone number

from Contacts or enter/

change it manually.

Press and hold (if neces-

sary enter mailbox

number once only).

Confirm with §OK§ and

§Mailbox§ depending on

your service provider.

§OK§

Confirm.

CB services

Displays

CB services

Ö , Õ

Topic activated/deactivated.

C ¢M ¢CB services

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

you will receive messages on the ac-

tivated topics in your Topic list.

New messages received on

the topic.

Messages already read.

New topic Add to topic list.

CB messages are displayed in stand-

by mode; longer messages are

scrolled automatically.

• If the topic index is available, se-

lect a topic from it and confirm.

• Create a new topic. Enter topic

name and channel number. Open

§Options§ menu and select Save.

Receive CB

Activate/deactivate CB-

service. If the CB service is

Auto display

activated, standby time

for the phone will be

reduced.

Choose to display:

no messages, all messag-

es, or only all new

messages.

Read new CB

All new messages are dis-

Use topic index

played in chronological

order.

Activate/deactivate use of

the topic index.

Topic list

CB languages

Receive Cell Broadcast messages in

just one language, in several, or in all

languages.

Add up to 10 topics to your personal

list from the topics index.

Requirements: Use topic index is acti-

vated and the service provider sup-

ports the function.

Activate/deactivate topic.

Display message on cur-

rent topic if any received.

Internet

¢Internet

Bookmarks

¢Select function.

Get the latest information from the

Internet that is specifically adapted

to the display options of your phone.

In addition, you can visit

wap.siemens.com ("Downloads")

where you can download or update

games, applications, sounds, graph-

ics and more for your phone. Inter-

net access may require registration

with the service provider.

Display URL/call up page

List bookmarks

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Saving

Bookmark site

The current page is saved

Access to the service

provider

Direct call-up of the browser with

the URL from your service provider.

in the phone as a

bookmark.

Bookmark options

§Options§ Open menu.

Downl. assist.

Here you will find functions for

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

You will not be left on your own dur-

ing the download!

Enter URL

On inputting a URL the browser is

started and the entered page

displayed.

Internet

End connection

Internet

Calling the function opens the

browser with the preset option.

Press to clear down the

connection and close the

browser.

Browser menu

§Options§ Open menu.

Navigation in the browser

• Select a link.

Homepage

Call up the pre-set

homepage of the current

profile.

• Settings, status on/off.

• Press briefly: go back a level.

Bookmarks

• List bookmarks Dis-

play list of bookmarks

stored in the phone.

• Bookmark site The cur-

rent page is saved as a

bookmark.

• One input field/link forward/back.

• Scroll one line.

Display symbols in the browser

(selection)

Go toö

Enter URL to dial an Inter-

net address directly, e.g.

wap.siemens.com

Connect

No net-

work

Reload

Reload current page.

GPRS online

Network

Show URL

Display the URL of the

page currently loaded for

sending via

Enter special characters

SMS/MME/e-mail.

Select important special

characters.

History

Display most recently vis-

ited Internet sites.

Disconnect

File

Disconnect the Internet.

Save the object on the

current page or the com-

plete page; display saved

pages.

Setup

Set or reset browser.

Close the browser.

Exit browser

Internet

Browser settings

History

Display most recently visited

Internet sites.

¢Internet

§Options§ Open menu.

Saved websites

Display list of pages stored in the

phone.

Setup

Select.

Browser

Set start option as well as

handling of pictures and

sounds plus send options.

Protocol

parameters

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

Security

Context

Set encryption.

Reset session; delete

cache, history and cookies.

Profiles

Processing depends on the service

provider (see page 74).

Your Internet browser is licensed by:

Setup

Changing profile settings

Edit a default profile or create a new

personal profile:

Profiles

¢T ¢Profiles

Several settings can be stored in a

phone profile in order, for example,

to adapt the phone to the surround-

ing level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Six profiles are provided with de-

fault settings. They can be

changed however:

Select.

The list of available functions is

displayed.

General

Vibration

Meeting

Outdoor

Car Kit

When you have finished setting a

function, you return to the profile

menu where you can change a

further setting.

Additional information

Headset

• To call up the list in standby mode:

G profile list is displayed.

• You can name two personal

profiles (<Name>).

• The active profile is identified with ·.

Switching on

Select default profile or

personal profile.

Activate the profile.

Setup

Profile options

Car Kit

§Options§ Open menu.

If an original Siemens car kit is used,

the profile is switched on automati-

cally when the phone is inserted into

the cradle (also see Accessories,

page 123).

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Copy settings from anoth-

er profile.

Headset

Rename

Change personal profile

(except default profiles).

The profile is only switched on auto-

matically if an original Siemens

headset is used (also see Accesso-

ries, page 123).

Setup

Different options are available de-

pending on the function:

Ringtones

¢Ringtones

Melodies

¢Select function.

Select a ringtone from

My stuff.

Volume

Set the volume for all tones.

Ringer setting

Ring

Ascend

Beep

Off

Play back the ringtone at

the set volume.

Set the volume.

Set ringtone to a rising

volume.

Confirm setting.

You can also make individual set-

tings for the following functions:

Reduce ringtone to a

short beep.

• Calls

Deactivate all tones for

the function concerned.

• Messages

• (SMS, MMS, CB services, E-mail,

Additional information

Use the Sound recorder to record your

own ringtones (page 102).

Duration)

• Organiser

• Alarm clock

• Inst. message

• Games

• Shutdown mel.

• Startup melody

Setup

Activating a new theme

Themes

Select theme.

¢T ¢Themes

Load a completely new visual pres-

entation onto your phone. Various

functions are reorganised on a

theme basis at the press of a key,

e.g.

Activate; if required, view

§Preview§.

• Animations

• Sounds

• Colour skins

• Wallpaper

Theme files are compressed to save

memory space. After a download or

a call from My stuff, these are auto-

matically unzipped when activated.

Additional information

It is possible that the existing settings could

be overwritten.

Setup

Note

Display

The Digital clock/Animation screensav-

ers reduce your phone's standby time.

¢Display

¢Select function.

Start up anim.

Select animation to be shown when

the phone is switched on.

Wallpaper

Set wallpaper graphic for the display.

Logo

Shutdown anim.

Select animation to be shown when

phone is switched off.

Choose picture to be displayed in-

stead of the provider logo.

Screensaver

Own greeting

After a specifiable time, the screen-

saver shows a picture in the display.

An incoming call and/or pressing any

key will end the function except if

the code security with the telephone

code is activated.

Enter greeting to be displayed in-

stead of animation when phone is

switched on.

Big letters

You can choose between two font

sizes for the display.

Preview

Display the screensaver.

Illumination

Style:

Set display light brighter/darker. The

darker the setting the longer the

standby time.

Choose between: Digital clock,

Analogue clock, Bitmap, Animation,

Energy saving, Off.

Press the navigation key

Picture:

Select image in My stuff.

repeatedly at the top/bot-

tom to adjust up or down.

Timeout:

Set period after which the screensav-

er starts.

Code protection:

The phone code is requested to close

the screensaver.

Setup

Assigning types of silent alert

Vibration

Each of the following applications

can be assigned their own type of

silent alert:

¢T ¢Vibration

To avoid the disturbance caused by a

ringing phone, you can activate the

silent alert function as an alterna-

tive. The silent alert can be switched

on in addition to the ringtone (e.g. in

a noisy environment). This function

is deactivated when the battery is

being charged and accessories are

connected (except the headset).

Calls, Messages, Alarm, Inst. message

Vibration

Activate/deactivate

silent alert.

Play demo

The types of silent alert offered are

demonstrated.

Setup

Install

Phone Pilot

You can download additional figures

from the Internet.

_¢¢_ST_elec¢_{t fu}P_nho_ctn_ie_onP_.ilot

Select entry from the list

or from the Inbox.

Your Phone Pilot will provide you with

information for many actions that

you carry out with your phone. It will

also remind you about appointments

or birthdays.

When installing a new

Phone Pilot you can give

this its own name.

§Yes§

Activate.

A Phone Pilot is available on the

phone as standard and cannot be

deleted.

Activating, deactivating

Off

You can deactivate the

Phone Pilot function.

Standard Select the included

"standard figure".

If you have loaded additional figures,

you can also install, activate or

delete these:

Select entry.

Activate.

Setup

EGPRS (EDGE)

Connectivity

Activate/deactivate

EGPRS.

_¢¢_ST_elec¢_{t fu}C_no_cn_tn_ie_oc_nt_.ivity

EGPRS is a method for transmitting

data in the mobile network faster

than with GPRS. Use EGPRS and if the

network has sufficient capacity, you

can be connected to the Internet

permanently. Only the actual trans-

mission time is charged by the net-

work operator. Some service provid-

ers do not yet support this service.

IrDA

Your phone has an infrared inter-

face. With this interface, you can ex-

change data such as pictures, ring-

tones, Addressbook entries,

business cards or organiser data with

other devices which also have

an infrared interface.

Shown in the display:

The infrared interface is on the left

side of the phone. The distance be-

tween the two devices must not ex-

ceed 30 cm. The infrared windows in

both appliances must be aligned as

accurately as possible with each

other.

Activated and available.

Registered.

Temporarily interrupted.

EGPRS info

Display information on connection

status.

Activate/deactivate IrDA.

If IrDA (infrared) is activated, Blue-

tooth is not active and vice versa.

Shown in the display:

IrDA activated.

During transmission.

Setup

Activate/deactivate

Bluetooth.

Bluetooth (BT)

Bluetooth is a short-range radio con-

nection by means of which a headset

or car kit, for example, can be con-

nected without the need for wires.

Using the Send/print function in the

options menu for the application

concerned you can also use this

route to send data.

If Bluetooth is activated, IrDA (infra-

red) is not active and vice versa.

If Bluetooth is activated, standby

time for the phone will be reduced.

Shown in the display

Bluetooth activated.

With SAP (SIM Access Profile) a car

phone GSM module can, for exam-

ple, use the access data from the SIM

card on your phone. There is no need

to swap the SIM card. It is possible

that SAP might not be supported by

your service provider.

Bluetooth visible to others.

Bluetooth during data

transmission.

Call accepted on Bluetooth

device.

Bluetooth setup

Each Bluetooth device has its own

specific address and can be given a

self-explanatory name as an option.

Password protection ensures the se-

curity of a Bluetooth connection, as

does including the BT partner in a list

as a "trusted" device.

Bluetooth activation.

My BT name: You can give

the phone a name when

you activate Bluetooth for

the first time.

To establish a Bluetooth connection

between your phone and other Blue-

tooth devices you must activate

Bluetooth.

The search can be global or just for

certain BT devices specified in the

options menu.

Open selection.

The Bluetooth^®word mark and logos are

owned by Bluetooth SIG, Inc. and any use

of such marks by Siemens is under licence.

Other trademarks and trade names are

those of their respective owners.

Bluetooth QDID (Qualified Designer ID):

B02422

Setup

Specify which BT devices are to be

searched for:

Device list

• Known devices

All

All BT devices

To make selection easier, frequent

BT partners can be recorded in the

known device list. If entries are

"trusted", no password query is

made.

Audio

Phone

E.g. headset, Car Kit

Other BT phones

Personal computer with

BT connection

• Last connected

Start search.

List of most recently and/or still con-

nected devices.

The number and name of the most

recently found BT device are

displayed.

• Reject list

Attempts to make connections to de-

vices in this list are rejected.

The search is ended and

the first 10 devices found

• Last srch.result

are shown in a list.

List of the last devices found.

Lists options

Different functions are offered de-

pending on the list.

§Retry§ Start new search.

Scroll to the required

entry.

Dial the device and start

the procedure for accept-

§Options§ Open menu.

ance as a "trusted" device

in the list of known devic-

es. To do this, enter the

password for the other

device. If the list is full it is

not possible to add anoth-

er device.

Search/Retry

Search for BT devices or

repeat search.

Use as audio

If not possible automati-

cally, specify device as

an "audio" device.

Increase prio.

Decrease prio.

Move entry up the list so

that, for example, a spe-

cific audio device is used

first.

Move entry down the list.

To reject list

To known list

Setup

• Auto mode

Move entry to the reject

list.

Your phone is "visible" to other BT

devices for five minutes. You will

then be asked if "visibility" should

continue.

Move entry to the list of

known devices.

(For standard functions see page 17)

• Always visible

Your phone is always "visible" to oth-

er BT devices. These devices can cre-

ate a connection to your phone and

be added to the known device list if

necessary.

My BT name

The phone is given a name (max.

20 characters) – this is the name the

partner sees. If no name is given, the

phone uses the non-changeable

device address.

BT audiostream

When a Bluetooth headset is used,

all audio signals are transmitted to

this exclusively.

Information about the BT hardware

also cannot be modified.

Visib.to others

Make settings to specify how your

phone should "act" when in contact

with other BT devices. This means (if

"visible"), for example, that the de-

vice address or the BT name of your

phone is shown to other BT devices if

they request this in order to receive

or send data.

Configura. set

Default setting and activation of the

connection profiles for data

transmission.

The phone default setting varies

from service provider to service

provider:

• The settings have already been

implemented by the service pro-

vider. You can start immediately.

• Not visible

Your phone is not "visible" to other

BT devices. Known devices such as

the Bluetooth Headset / Car Kit con-

tinue operating.

• Access profiles have already been

created by your service provider.

Then select profile and activate.

• The access profiles must be con-

figured manually. In this case, you

will receive the necessary data

from the service provider or visit:

www.siemens.com/

mobilephonescustomercare

Setup

Selecting profile

Fax/data

Select the profile.

Confirm selection.

Send voice/fax

Set this function on the phone before

transmission so that you can switch

from voice mode to fax mode.

Setting profile

Rec. fax/data

Select the profile.

§Options§

Your service provider has given you a

number for telephoning and a

fax/data number.

Open menu.

Select service and enter

data.

Edit

The call is signalled by a special ring-

tone and the type of call (fax or data)

is displayed. Now start the commu-

nication program in your PC to re-

ceive the fax/data.

User name:

Your name.

Application

profile:

Select application profile.

Preferences

List of preferred

accesses.

POP3 server:

Enter Internet address if

the server type is POP3

and SMTP.

POP3 port:

SMTP server:

SMTP port:

(Default: 110)

Enter Internet address.

(Default: 25)

SMTP

authentic.:

Authentication: Yes/No

SMTP

password:

A user password will be

required if "Authentica-

tion" is set to Yes.

Setup

Navigation keys

Shortcuts

The navigation key can be assigned a

function for three directions (only ef-

fective in standby mode). The down-

wards movement is assigned to

opening contacts and cannot be

modified.

¢T ¢Shortcuts

Soft keys

You can assign one function to each

of the two softkeys.

Editing

Select the desired

direction.

Select key.

Call up the edit function.

Choose application from

the list.

Scroll to new assignment

in the list.

Confirm selection.

Confirm.

Number keys

Number keys 2 to 9 can be used as

speed dialling numbers for fast ac-

cess to functions.

Additional information

The service provider may have already as-

signed functions to all the keys (e.g. access

to "SIM services" or direct call-up of the In-

ternet portal). It may not be possible to

modify this key assignment.

Number key 1 is reserved for the mail-

box phone number (page 59).

Application

The "Internet" is just used as an ex-

ample here.

§Internet§ Press and hold; the appli-

cation is started.

Setup

Assigning numbers or functions

Key tones

Set the type of acoustic key

acknowledgement.

Select the key.

Call up the edit function.

Click, Tone, Silent

Choose application from

the list.

Show functions

Show the functions set for the

number keys

Confirm selection.

Apply

Start a stored application

(e.g. Internet).

In standby mode:

Press briefly.

The assignment of the number key 3

is displayed above the right softkey

e.g.:

§Internet§ Press and hold.

Or simply

press and hold.

Setup

All calls

Call setup

All calls are diverted.

¢T ¢Call setup

Symbol in the top line of

display in standby mode.

¢Select function.

Hide ID

Unanswered

Includes the conditions Not reachable,

No reply, Busy, see below.

When you make a call, your phone

number can be displayed on the re-

cipient's display (depending on the

service providers).

Not reachable

Divert occurs if phone is switched off

or is out of range.

To suppress this display, you can en-

able the "Hide ID" mode for all subse-

quent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

No reply

A call is only diverted after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5-second intervals.

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Busy

Divert occurs if a call is in progress. If

Call waiting is activated, you will hear

the call waiting tone during a call.

Receiving fax

Fax calls are diverted to a number

with a fax connection.

Divert

Select the condition under which

calls should be diverted to your mail-

box or another phone number. To

set diversion:

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Select condition,

e.g. Unanswered.

Confirm change, then

select Set.

Enter phone number.

§Options§ Open, then select Save.

Setup

Status check

Call screening

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and

displayed.

Only calls from phone numbers that

are in Contacts or on the SIM card or

assigned to a group are signalled au-

dibly. Other calls are only displayed.

Any key answer

Incoming calls can be accepted by

pressing any key (except for B ).

Clear all

All set diverts are cleared.

Additional information

Minute beep

Note that the divert is stored in the network

and not in the phone (e.g. when the SIM

card is changed).

During the call, you will hear a beep

after each minute as a reminder of

the time elapsed. The recipient does

not hear this beep.

Reactivating divert

The last divert has been stored. Proceed as

with "Set divert". The stored phone number

is displayed. Confirm number.

Setup

Key tones

Set the type of acoustic key

acknowledgement.

Phone setup

¢Phone setup

¢Select function.

Click, Tone, Silent

Language

Display language

Set the language for the display text.

When Automatic is set, the language

of your service provider is used.

Info tones

Set service and alarm tones:

On/off

Activate/deactivate tones.

Extended If switched on, a wider

range of service tones is

available, e.g.: end of

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

menu, network connec-

tion interrupted.

Automatic switch off

The phone switches off each day at

the set time.

_{# 0 0 0 0 #}A

Input language

Select the language for text input.

Languages supported by T9 are

marked with the T9 symbol.

Switching on

Set

Select.

Enter time

T9 import

§Save§

(24-hour-clock).

Load database for T9 support for the

current language.

Save.

Switching off

T9 export

Switch off Select.

Save database for T9 support for the

current language to My stuff.

Confirm.

Setup

Device test

File system

After the last information page, a

self-test as well as individual tests

Format

(Phone-code protected)

The phone memory is formatted and

all saved data such as ringtones,

pictures, games, etc. is deleted.

Formatting may take longer than

1 minute.

are offered. If you select Self-test, all

individual tests are carried out.

Software version

Display the software version for your phone

in standby mode:

# 0 6 #, then press

Format card

Format the RS MultiMediaCard.

Memory assist.

Eject card

The memory assistant will help you if

there is insufficient phone memory.

If required it can also be started au-

tomatically from applications.

Remove the RS MultiMediaCard

without loss of data while the phone

is switched on.

After their capacities have been

checked, all files and folders are dis-

played along with their size and may

be viewed/opened and, if necessary,

deleted.

Licence manag.

The licensed data or applications can

be displayed and managed (see also

DRM, page 14).

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Press several times to dis-

play additional informa-

tion about the device.

Setup

• No profile active

Device manag.

The list of profiles is chosen for you

to choose from.

The device manager can be used, for

example, to transfer configuration

data from the service provider via

WAP push (page 53).

Select profile.

The phone default setting varies

from service provider to service

provider:

Activate the profile.

• The settings have already been

implemented by the service pro-

vider. You can start immediately.

§Options§

Open menu, then select

Edit and make entries.

Last connection

The data for the last con-

nection is displayed.

• Access profiles have already been

created by your service provider.

Then select profile and activate.

• The access profiles must be con-

figured manually. If necessary,

contact your service provider. You

will also find the current settings

for the service provider on the In-

ternet at

Master reset

The phone is reset to the default val-

ues (factory setting). This does not

affect SIM card and network settings

or data saved during Instant

Messaging.

www.siemens.com/

mobilephonescustomercare

under "FAQ".

Alternatively, in standby mode

enter:

Active access

# 9 9 9 9 #

Select function.

§Start§

Establish a connection to

the active profile.

• Profile active

After the data has been transferred:

§OK§

Confirm.

Setup

Time format

Select 24h or 12h.

Clock

¢Clock

¢Select function.

Date format

Select the display format for the

date.

Time/date

The clock must be set to the right

time once at start-up.

Begin of week

Start editing.

Select the weekday on which the

monthly and weekly view on the left

starts.

First enter the date

(day/month/year), then

the time (hours/min-

utes/seconds).

Buddhist year

Switch to the Buddhist year (not on

all phone models).

Additional information

Display the calendar to select

the date.

Show clock

Activate/deactivate time display in

standby mode.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Auto time

Time and time zone are set automat-

ically. The time zone is detected

automatically.

Time zones

The time zone can be selected in the

world map or a city list:

World map

Select the desired time

zone.

City list

Select a city in the

selected time zone.

§Options§

Open menu and select

Search city.

Setup

Only ¡

(PIN2 or phone-code protected)

Security

_¢¢_ST_elec¢_{t fu}S_nec_cu_tir_oit_ny_.

Dialling options are restricted to SIM-

protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually be-

fore dialling.

Auto key lock

The keypad is locked automatically if

no key has been pressed for a specif-

ic (pre-determinable) time. This pre-

vents the phone from being used ac-

cidentally. However, you can still be

called and you can still make an

emergency call.

If the SIM card does not support PIN2

input, the whole Phonebook can be

protected with the phone code.

This SIM only

(PIN2 or phone-code protected)

Select Set.

The phone can be connected to a

SIM card once the phone code is en-

tered. Unless the phone code is

known the phone will not operate

with a different SIM card.

Enter time in minutes and

seconds after which the

keypad lock is to be

activated.

Additional information

The keypad can also be locked and un-

locked directly in standby mode.

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

In each case:

Certificates

Display certificates for secure data

connections.

Press and hold.

Direct call

(Phone-code protected)

Codes

For description, see page 13:

Only one phone number can be

dialled (page 28).

PIN control, Change PIN, Change PIN2,

Chg. phonecode

Setup

All incoming

Barrings

The phone is barred for all incoming

calls (forwarding all calls to mailbox

provides a similar effect).

Barring restricts the use of your SIM

card (this is not supported by all serv-

ice providers). You need a 4-digit

network password for network bar-

ring which your service provider will

give you. You may need to be regis-

tered separately for each barring.

When roaming

You do not receive calls when you

are outside your home network. This

means that no charges are incurred

for incoming calls.

All outgoing

All outgoing calls except emergency

numbers are barred.

Status check

Status check for network barrings.

Outgoing intl.

(Outgoing international)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x.home

(International outgoing without home

country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

Setup

Choose netwrk

Network

Network search takes place again if,

for example, you leave your home

network or want to register on a

different network. The search can

take place in Manual (see Network info)

or Automatic mode (see also Preferred

netw.).

_¢¢_ST_elec¢_{t fu}N_net_cw_tio_or_nk_.

Line

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Preferred netw.

Select line

Enter your preferred service provid-

ers here in order of preference for

when you leave your home network

(e.g. if there are differences in

price).

Change the connection.

Display the current phone

number.

The current service provider is

displayed.

Protected

(Phone-code protected)

You may limit usage to one phone

number.

Show list of preferred

networks.

<Empty> Select.

Additional information

Confirm change, then se-

Special settings may be made for each

phone number (e.g. ringtones, call diver-

sion etc.). To do this, first switch to the re-

quired phone number.

lect a new service provid-

er from the list.

Record service provider

again (last entry in the

list):

Network info

The list of GSM networks currently

available is displayed.

Indicates forbidden serv-

Furth.network

Select, enter the provider

data and save it.

ice providers (depending

on SIM card).

Setup

User group

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.

Depending on your service provider,

you can create groups with this serv-

ice. These have access, for example,

to internal (company) information,

or special tariffs apply to them. The

details can be clarified with your

service provider.

Active

Activate/deactivate function. "User

group" must be deactivated for nor-

mal phone use.

Band selection

Select either GSM 900, GSM 1800,

or GSM 1900. Make sure that your

service provider also supports the

selected band.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are ob-

tained from your service provider.

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

All outgoing

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls within the

group are permitted.

Pref. group

If activated, calls may only be made

within this standard user group (de-

pending on the network

configuration).

Setup

Automatic switch off

Accessories

(Factory default: 2 hours)

¢Accessories

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the time at which the phone

switches off automatically.

¢Select function.

Car Kit

Only in combination with an original

Siemens handsfree car kit (see

Accessories). The car kit profile is

activated automatically when the

phone is inserted into the cradle.

CarKit speaker

Improves playback in certain

circumstances.

Automatic settings

Edit profile

• Permanent illumination:

activated.

See page 65.

Auto answer

(Factory default: off)

Calls are accepted automatically af-

ter a few seconds. Eavesdropping is

possible!

• Auto key lock: deactivated.

• Charging the phone battery.

• Automatic activation of the Car Kit

profile when the phone is inserted

in the cradle.

Car Kit keys

Key assignment when working to-

gether with Car Kit Comfort.

Answer by removing from the cradle

(do not use while driving).

Auto answer

If you do not notice that your phone has ac-

cepted a call, there is the danger that the

caller may eavesdrop.

Setup

Headset

USB charging

Only in conjunction with an original

Siemens headset (see Accessories).

If an original Siemens headset is

used the profile is automatically

activated when the headset is

plugged in.

If the phone is connected with the

data cable to a PC, the battery can al-

so be charged in this way (only with

original Siemens accessories,

page 123).

Edit profile

See page 65.

Auto answer

(Factory default: off)

Calls are accepted automatically af-

ter a few seconds (except where the

ringer is switched off or set to beep).

You should therefore be wearing the

headset.

Automatic setting

Accept call with Call key or Call ac-

ceptance key, even when the auto

key lock is activated.

Organiser

Forward/backward by the

hour through the day.

Calendar

¢Q ¢Calendar

Open daily view.

You can enter appointments in the

calendar. Time and date must be set

for the calendar to work correctly.

Daily view

Description of appointment.

The calendar offers you three views:

One day forward/back.

Monthly view

Special appointments are

highlighted in colour.

Scroll by the hour or to

next/last entry.

Display current entry.

Press briefly to go

forward/back a week.

Calendar setup

Press and hold to go

forward/back a month.

§Options§ Open menu, then

select Calendar setup.

Press briefly to go

forward/back a day.

Start of day:

Time when the working day begins.

Open daily view.

Start of week:

Weekday on which the monthly and

weekly view on the left starts.

Weekly view

Appointments are shown as a

colour bar on the vertical hour divi-

sion. Conflicting appointments are

highlighted in colour.

Set weekend

Set the days for the weekend.

Show birthdays:

Yes/No

Press briefly to go

forward/back a day.

Press and hold to go

forward/back a week.

Organiser

Different input/selection fields are

displayed depending on the type.

Appointments

The number of fields can be restrict-

¢Q ¢Appointments

ed, see Standard at the end of the list.

Appointments are displayed in

chronological order in a list.

Description:

Description of nature of

appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from Contacts.

Select.

Category:

Memo

Voice reminder:

Enter a voice recording, see

Dictat.machine, page 94.

Text input for description.

Voice reminder

Create a voice memo.

Shown with alarm.

Location:

Location of appointment.

Call

Whole day:

Day-long appointment: yes/no.

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment begins.

Meeting

Start time:

Time when appointment starts.

Text input for description.

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

Additional information

Insert date from calendar.

Organiser

Alarm:

Information on the alarm

When the set date and time are

reached there is an audio and a

visual alarm.

On/off or Vibration.

Enter the period of time

before the appointment

and select the time unit:

Alarm type Birthday:

Minutes, Hours, days

You can send special birthday greet-

ings by SMS, MMS, e-mail or a call via

§Options§. The alarm sounds one day

before the birthday.

Reoccurrence:

Select a timeframe for repeating the

appointment:

Use Pause to set the alarm to repeat.

No, Daily, Weekly, Monthly, Yearly

Enter a parameter for repeating:

Forever, Until, Occurrences (number)

Additional information

Display above set alarms:

Alarm clock

Appointment

An alarm sounds even when the phone is

switched off. The phone does not go to

standby mode. To deactivate it press any

key.

If Weekly is selected, certain week-

days can be highlighted.

All fields/Reduced fields

In the list, select those fields which

are to be offered for future entries.

§Options§ Open menu.

Save

Save appointment.

Organiser

Tasks

Notes

¢Q ¢Tasks

¢Q ¢Notes

A task is displayed like an appoint-

ment in the agenda for the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task ap-

pears at the top of the list every day

until it is marked as completed.

Write and manage brief text notes.

Protect confidential information

with the phone code (do not save

any important data or the PIN for

credit cards etc. here).

Entering a new note

The entries are made in the same

way as Appointments (see "Appoint-

ments"). Then:

Write a normal note.

Write a protected note

(phone code).

Status:

Select Done or Outstanding.

Enter text. The first line is

displayed later as a "title"

in the notes list.

Priority:

Select 5 levels from

Lowest to Highest.

Save.

Date in use:

If activated with Yes, the following

time input option is offered.

Due date:/Due time:

Enter the date and time by which the

task is to be completed.

Alarm:

As for Appointments.

Save

Save task.

Organiser

Organiser options

Depending on the application used

(Calendar,Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

Dictat.machine

¢Q ¢Dictat.machine

Use the dictating machine to record

short voice memos.

• Use your phone as a dictating

machine when on the move.

§Options§ Open menu.

Delete until

Delete all entries prior to a

certain date.

• Record a memo as a reminder or

as a note for others.

Delete done

Delete all completed tasks.

Switch alarm on/off.

• Add a voice memo to an

appointment in the calendar.

Activate/

Deactivate

• Record a call.

Done

Set task to completed/in

progress.

Warning!

The use of this feature may be subject to

restrictions under criminal law.

(For standard functions see page 17)

Please inform the other party to the conver-

sation in advance if you want to record the

conversation and please keep such

recordings confidential.

You may only use this feature if the other

party to the conversation agrees.

Organiser

New recording

Dictating machine options

Record new

§Options§ Open menu.

Select. The remaining

Play

Play back current

recording.

time available, as well as

the recording time, are

shown in the display.

Loudspeaker

Settings

Playback through the

built-in loudspeaker.

A brief beep sounds when

the recording starts. Now

dictate the text.

Set recording quality:

Low, Medium, High

Switch between

pause/record.

ó ô

(For standard functions see page 17)

§Stop§

End recording.

Time zones

Recording is saved with a

time stamp. Rename with

§Options§.

¢Q ¢Time zones

The time zone can be selected in the

world map or a city list:

Playback (via Media player)

World map

Select the desired

recording.

Select the desired time

zone.

Switch between

playback/pause.

ò ó

City list

Press and hold for fast

forward and rewind.

Select a city in the

D E

selected time zone.

§Options§ Open menu and select

Search city.

Set time zone.

Organiser

Set profile:

Remote synchronisation

Display menu for

changing.

¢Q ¢Remote sync.

You can use this function remotely

to synchronise the personal data on

your phone (contacts, notes, calen-

dar entries) with externally saved da-

ta. The external data can, for exam-

ple, be saved on a company

Server sett.

Providers

Display the current service

provider.

Homepage:

Port:

e.g. www.siemens-

mobile.com/syncml

computer or the Internet e.g.:

Enter port number,

e.g. 80.

www.siemens-mobile.com/syncml

A request to synchronise data can al-

so be sent via WAP push (page 53).

The user, however, must agree to

the start.

Enter user name

(login name).

Password:

Enter password (shown as

a series of asterisks).

Settings and functions

Contacts path:, Appointments path:,

Notes path:, Tasks path:

Select the desired

function.

Last sync:

Display.

Display the time of the last

synchronisation.

Active account

Two profiles can be set for

synchronisation.

Sync data:

Modified data or All data

Sync direction:

Two-way, Mobile update or Server

update

Select profile.

Activate the profile.

Date range

Limit the time for the synchronisa-

tion of appointments in days/weeks.

Contacts, Appointments, Tasks, Notes

Highlight application(s) whose data

is to be synchronised.

Organiser

Synchronisation

Before synchronisation you must

select a profile (Active account) and a

data area (Sync items:) and enter the

correct path to the data (Server sett.).

Confidential notes are not

transferred.

§Sync§

The computer is selected

and synchronisation

started.

When synchronisation

has been carried out suc-

cessfully, the actions that

have been performed are

displayed on several tabs.

Extras

SIM services (optional)

Calculator

¢SIM services

¢Calc.

Your service provider may offer

special applications such as mobile

banking, share prices, etc. via the

SIM card.

The calculator is offered in a basic

version and with an advanced range

of functions.

The input line is in the middle of the

display with two calculation lines

above it.

If you have such a SIM card, the SIM

services will appear in the main

menu under "Extras" or directly

above the softkey (on the left).

Beneath it is the matrix with the

calculation functions.

Symbol for SIM services.

Enter digit(s).

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone is ready to support fu-

ture additions in your service provid-

er's user package. For further infor-

mation, please contact your service

provider.

Navigate to functions in

F I

the matrix.

Accept function.

Enter digit(s).

Apply function. The

result is calculated and

displayed immediately.

My applications

To help you organise the applica-

tions you download from the Inter-

net you can use the My applications

folder in My stuff.

For further information, see

page 111.

Extras

Basic functions

Unit converter

+, -, *, /

Basic calculation types

¢Unit converter

Result

You can convert various measure-

ment units in the decimal system

into other measurement units.

1/x

§AC§

Reversion

Convert to percentage

Decimal point

Sign change "+" / "–"

New calculation

Velocity

Mass

Energy

Pressure

Volume

Time

Extended functions:

Area

Length

§Options§ Open menu, then select

Extended mode.

Power

Currency

Temperature

Square root

Square

x²

Example for Velocity units:

Exponent

M+

Save displayed number

Call up saved number

Insert number from memory

Type

Units

Velocity

Kilometres/h,Metres/sec,

Miles/h, Miles/sec, Knots,

Mach

Calculator options

§Options§ Open menu.

Converting the units/currency

Select the source

Convert

Call up the current

result in the unit

converter.

unit/currency.

Switch to the input field.

Clear all

Delete all units.

Enter the quantity to be

converted.

Memory save,

Memory recall,

Memory clear

Save or recall result;

delete memory.

Switch to the selection

field.

Extended mode/

Basic mode

Switch calculator

functionality.

Select the target meas-

urement unit/currency.

(For standard functions see page 17)

The result is displayed.

You can use both input fields

alternately.

100

Extras

Special key functions:

Online status

The application can be called up

from various other applications,

such as Inst. message or from

Contacts.

Set the decimal point.

Change the preceding

sign.

In Online status you can set such at-

tributes as "Availability" or "Mood",

which are visible to subscribers to

Inst. message. You can also edit your

status lists for the respective service

here.

Currency

When you call up the function for the

first time, you must enter currencies

into which the conversions are to be

made.

Enter the name of the

Depending on the service provider

and available services, five tabs are

offered.

currency (e.g. Euro).

§Options§ Open menu and save the

entry with Save.

Online status

For Instant message:

Now enter the names and exchange

rates of up to three additional cur-

rencies for conversion.

Available, Busy, Not available

Indicate whether you

can be reached in the

respective service.

§Options§ Open menu.

Sign change

Change the preceding

sign.

§Options§ Select Privacy. Depending

on the choice between

Memory save,

Memory recall

Save or recall result.

Public, Private orHidden the

following attributes can

be seen by all subscribers,

only by members of the

Private list or by no-one.

Edit rate

Change the exchange

rate for the base

currency.

Add currency

Set as base

Calculator

Enter new currency and

exchange rate.

Use current currency as

base currency.

Start calculator.

(For standard functions see page 17)

Extras

101

My alias: Enter your personal

Info messages

List the messages sent by the service

provider.

nickname.

My text:

Enter your personal infor-

mation text (access to

saved texts via §Options§).

Settings

My logo: Select your personal logo

(start via §Options§ My stuff

or Camera).

The dependence of Online status

settings on those of the current

profile (page 64) can be

activated/deactivated.

My mood: Indicate your personal

mood.

IMSG lists

(Instant Messaging lists)

Access to the following lists:

Pending reques.

Display the current requests for your

personal attributes.

Watcher list

Display who is watching your

attributes.

Private list

Display subscribers who can see all

attributes set to Private.

IMSG block list

Display all subscribers who can see

no attributes and are blocked for

Inst. message.

102

Extras

Start the recording from another

application:

Sound recorder

¢Sound recorder

Back to application.

Use the sound recorder to record

noises and tones for use as ring-

tones. The sound recorder is usually

started from other applications/func-

tions such as assigning a ringtone.

Playback (via Media player)

Select the desired

recording.

Switch between

playback/pause.

ò ó

New recording

New entry Select.

Press and hold for fast

D E

forward and rewind.

The remaining time avail-

able, as well as the record-

ing time, are shown in the

display.

§Options§ Open menu.

Play

Play back current

recording.

A brief beep sounds when

the recording starts.

Set asö

™ contact

Settings

Set the recording as a

ringtone.

Switch between

pause/record.

ò ó

Assign recorded sounds

to a contact.

§Stop§

The recording is ended

and saved with a time

stamp in My stuff/Sounds.

Set recording quality:

Low, Medium, High

Start the recording from Sound

recorder:

(For standard functions see page 17)

Play back.

Rename the recording via

§Options§.

Extras

103

Stopwatch

Countdown

¢Stopwatch

¢Countdown

The stopwatch can work with lap

times and intermediate times.

A set time elapses. The last

4 seconds are indicated by a beep.

At the end a special beep sounds.

Display, also in standby mode.

With Lap timing, each time a time is

taken the stopwatch returns to zero.

With Split timing, the clock continues

to run and the respective intermedi-

ate time is stored (max. 99).

Enter period of time

Display, also in standby mode.

Start, stop or continue,

select standard timing.

ò õ

Start countdown.

depending on the

situation.

Standard timings

It is possible to call up or set five

timings with different countdown

times.

§Lap /§Split§

Store the current

intermediate/lap time.

Stopwatch options

§Options§ Open menu.

Select standard timing.

Change§ Open input field.

Start

Start the stopwatch.

Enter name, then period

of time.

Save§

Continue to take an

intermediate time.

Save entries.

Reset

Reset to zero.

Additional information

For Stopwatch and Countdown:

Stopwatch

list

Display saved entries.

§Stop§

ends the function

prematurely.

Lap timing/

Split timing

Switch mode.

§Exit§ or B end only the display, not the

(For standard functions see page 17)

function.

104

Extras

Change menu

You can replace each entry (1–10)

with another entry from the

selection list.

Date calculator

Calculate the period between two

specified dates.

From: enter date, then

Until: enter date.

Select the required entry.

§Calc.§

Start calculation.

§Change§ The function list is opened

for selection.

Edit output units.

Select the new entry from

the list.

Select previous/next

value.

Confirm. The entry is

saved.

My menu

Create your own menu

with frequently used functions,

phone numbers or Internet pages.

If Phonebook is selected, the phone

number must also be selected; if

Internet is selected, the bookmark

must also be selected.

The list of 20 entries is preset. You

can, however, change it as you wish.

Conver. history

Read all dialogues from

the last session offline

(deleted next time you

Using

Select the required entry.

Confirm.

If the selected entry is a

phone number, you can

also call it with the Call

key.

Alarm clock

105

Alarm clock

¢U ¢Alarm clock

Setting the days for an alarm

The alarm sounds at the set time

even when the ringtones or the

phone are switched off. The alarm

clock is activated automatically after

a change is made.

§Options§ Open the menu and select

Set days.

Switch between the days

of the week.

Mark or unmark the days

for an alarm.

An alarm is ended by pressing any

number key.

§Save§

Save the alarm call time.

Alarm clock

18:45

Alarm clock options

§Options§ Open menu.

Change

Set the alarm call time.

Switch between am

and pm if 12 hour mode

set.

07:30

Mo Tu We Th Fr Sa Su

Set days

Set the days for an

alarm.

Options

Exit

Ringtones

Clock

Set ringtone.

Set the time for the alarm

call (hh:mm).

Set time (page 83).

Auto snooze

If user does not react:

snooze only or

deactivate alarm.

Activate/deactivate the

alarm clock.

(For standard functions see page 17)

Additional information

Screen display in standby

mode:

alarm clock activated.

Use Snooze to set the current alarm to

repeat.

106

Media player

Starting from an application

Videos

All supported video formats are

displayed.

When you are viewing a picture/vid-

eo or listening to a melody, the appli-

cation starts a media playback.

All files stored in the phone or on the

RSMultiMediaCardareautomatically

shown in a list in the tabs. This list

can be arranged according to the

meta data (ID3 Tags) according to

album, artist, genre or title.

Direct number for the media

player

Press key

Sounds/Video

Functions for playing back songs or

videos.

¢V

For fast access, all the media files on

your phone are offered on four tabs:

Play or pause, depending

on the situation.

Sounds, Playlist, Pictures, Videos

Fastforward/rewindwhile

key is pressed.

Select tab.

Select file.

Load next/previous media

file.

Start playback.

Switch to full screen

mode and back again.

[

Arranging files

After the media player starts the

following tabs are displayed:

Set the volume with the

plus/minus keys.

Switch to mute.

End playback.

Sounds

§Stop§

All AAC, AAC+, AAC++ and MP3 files

are displayed.

For further services, see §Options§

Playlist

page 107.

All playlists (file format: .m3u)

are displayed.

Pictures

All supported picture formats are

displayed.

Media player

107

Playlist

Several pieces of music are compiled

in a playlist (*.m3u).

Pictures

Zoom functions for a displayed

picture.

Zoom function if the

§Options§ Open menu, select New

displayed picture has a

and then Playlist.

higher resolution than the

display. The two softkeys

(+/-) enlarge/reduce the

picture.

Playlist options

§Options§ Open menu.

Add track

Add a piece of music.

The enlarged picture

detail is moved using

the navigation key.

F I

Remove track

Move track

Remove a piece of music.

Move piece of music

up/down with the

navigation key.

Centre picture.

For further services, see §Options§

page 107.

Centre key functions:

Play, play back

Pause

Stop

Media player options

§Options§ Open menu.

Different functions are offered de-

pending on the starting situation

and the object.

In the simplest case, the playlists

are created on a PC and transferred,

together with the songs, via the

Mobile Phone Manager (see page 19

and page 112) into the Sounds

directory in My stuff.

Play/Pause

Play back the current

media file or pause.

Open

Select the media source

such as My stuff,

Bookmarks or URL.

New

Select an application to

create a new object or a

new playlist for music.

Zoom

Activate/deactivate zoom

mode.

108

Set asö

Media player

Set picture as Wallpaper,

Incoming call

Logo, for example, and

sounds, for example, for

Incoming call, Startup

melody.

An incoming call pauses the playback and

puts the media player into the background.

After the call has ended the playback

continues automatically.

™ contact

Assign a picture or melody

to a contact.

Playback in the background

You can put the media player in the back-

ground in order to work with other applica-

tions. Playback, e.g. of songs, continues.

Edit playlist

Play mode

Edit a playlist (page 107).

• Individual piece of music

• Repeat (piece of

music/playlist)

Press key repeatedly to

switch: foreground or

background operation.

• All pieces of music

• Introduction; the first 5

seconds of each piece of

music is played.

Slideshow

Edit

Automatic run-through in

full screen mode. Change

individual picture with

navigation key.

Access to picture editing

(application must be

loaded).

To back-

ground

Put Media player into the

background.

Full screen

Full screen display of a

picture/video.

(For standard functions see page 17)

My stuff

109

My stuff

To organise your files, you can use

the file system like a PC file manager.

There are separate folders for the

various data types in My stuff.

Download

Melodies, pictures, games and other

applications are offered on the Inter-

net. Once downloaded, you can ac-

cess these via the phone. Most appli-

cations include instructions. To

download e.g. new pictures, sounds,

the appropriate folders contain the

download function.

¢N

The list of the folders and files is

displayed (on two tabs if an RS

MultiMediaCard is used).

Remember that pictures and sounds

may be protected (DRM, page 14).

Select file or folder.

Open folder and select file

or link.

ì ö

Some applications and games are

already pre-installed on your phone.

Downloading can, if necessary, take

place in two stages:

Depending on the selec-

tion, the file with the as-

sociated application is

opened or the download

started.

Description file only

The description file is

loaded for information

purposes only. The appli-

cation/game itself must

be loaded separately.

or complete download

The application/game is

completely loaded.

110

My stuff

Additional information

My stuff options

Different functions are offered de-

pending on the starting situation

and the object.

You can use the browser to download applica-

tions (e.g. ringtones, games, pictures, anima-

tions) from the Internet.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

buyer bears the sole risk for loss, damage or

faults to the phone or application as well as all

damage and implications arising from the appli-

cation. For technical reasons, such applications

or the retrospective release for certain functions

may be lost if the phone is exchanged/re-deliv-

ered or repaired. In such cases, the buyer is

required to download or release the application

again. Please ensure that your phone has Digital

Rights Management (DRM) so that downloaded

applications are protected from unauthorised re-

production. These applications are then exclu-

sively intended for your phone and cannot be

transferred from this even to create a backup.

Siemens does not warrant, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. We recommend that you carry out a

backup from time to time of the applications on

your PC using the "Mobile Phone Manager"

(MPM, page 112). You will find this on the sup-

plied CD-ROM. You can download the relevant

latest version of the MPM from the Internet at:

www.siemens.com/s75

§Options§ Open menu.

New folder

Attributes

Move/Copy

Create a new folder and

name it.

Display information on file

or folder selected.

Select file(s) or folder,

then select destination

folder and insert with ì .

Format card

Eject card

Format RS MultiMedia-

Card.

Remove the RS

MultiMediaCard without

loss of data.

Licence

manag.

Handling of DRM rights.

(For standard functions see page 17)

My stuff

111

Misc.

tmo

Directory structure

Separate folders have already been

created for different data types in

My stuff. These folders cannot be

changed.

Text modules

vmo

Voice recordings

Internet pages

html

wml

Depending on the service provider, the

Folder

Description

Format

structure, content and range of functions in

Sounds

mp3

aac

My stuff may vary.

Sounds, ringtones

aac+

aac++

m3u

mid

RS MultiMediaCard™

The RS MultiMediaCard extends the

memory capacity of your phone by

up to a gigabyte. This permits you,

for example, to store a large number

of pictures, videos or sounds. You

can also use the memory card as a

removable medium.

amr

wav

Pictures

bmp

bmx

jpg

jpeg

png

gif

Pictures

Videos

¢N

Videos

3gp

sdt

Open RS MultiMediaCard

tab

Themes

Loaded theme

(zipped)

The list of the folders and files is

displayed. The folders and files are

treated as in My stuff. If a file is

opened whose application is in the

phone the file is copied to there.

stc

Theme configura-

tion (unzipped)

Phone

Pilot

sda

Selection of a

character

Additional information

RS MultiMediaCard is a trademark of the

MultiMediaCard Association.

Changing the RS MultiMediaCard

(see page 11)

Games

jar

jad

Java archive

Download info

Applica-

tions

Applications, such

as Photo Editor or

Download Assistant

112

Mobile Phone Manager

The MPM (Mobile Phone Manager)

enables you to use extended phone

functions from your PC. The phone

and PC communicate via a data cable

(see Accessories, page 123), IrDA or

Bluetooth.

Call Control

You can dial straight from the organ-

iser at the click of a mouse. It also

makes establishing and managing

conference calls extremely easy –

the parties to the call are displayed

on-screen in a virtual conference

room, allowing you to swap effort-

lessly between the conference call

and a private call and to call and add

new subscribers at the click of a

mouse.

You can download the latest version

of the MPM software from the

Internet at:

SMS and EMS management

www.siemens.com/s75

Organiser

Write EMS and SMS messages from

the convenience of your PC. Use all

the options your PC offers you and

use your sounds and pictures to cre-

ate SMS and EMS messages. You can

read, forward, print, delete and

archive your messages.

You can use the organiser to manage

the contacts and appointments you

have stored in your phone and syn-

chronise them between your phone,

Outlook® and other Siemens phones

(including Gigaset). You can use all

Call Control functions from the

organiser.

Mobile Phone Manager

113

Backup and restore

Phone explorer

With the back-up function, you can

regularly make a back-up copy of

your phone data on the PC. If you ev-

er lose the data on your phone, or re-

place the phone, you can quickly re-

instate all data with the restore func-

tion. Please observe any possible re-

strictions for DRM-protected data.

You can access the data in your

phone quickly and easily with the

Phone Explorer. The phone is simply

integrated in the data structure of

your PC and handled exactly as if it

was another folder in your PC.

Mobile Modem Assistant

Bookmark Management

The Mobile Modem Assistant quickly

and easily establishes an Internet

connection via your mobile phone

enabling you to use your PC at home

or when travelling to surf the

Internet.

Use your PC to browse on the Inter-

net and define your preferred Inter-

net sites. Save the Internet addresses

as bookmarks on your phone so that

you can quickly call them up at a

later time when you are on the

move.

114

Mobile Phone Manager

Picture and photo processing

Plug & Sync

Picture/photo processing offers you

the opportunity to conveniently cre-

ate, edit and manage pictures and

photos. Filters and effects are of-

fered to help you create colourful,

attractive graphics. The user-friendly

interface makes child’s play of trans-

ferring pictures/photos from or to

the mobile phone, and of changing

the graphic settings.

Plug & Sync carries out your routine

tasks for you as you wish.

With "Music > phone" you can al-

ways copy your latest tracks and

playlists automatically to your

phone. With "Photos > PC" you can

transfer your newly taken photos to

your PC.

SmartSync

My stuff

With SmartSync you can always syn-

chronise your data with Outlook®,

OutlookExpress® or Lotus Notes™ as

soon as the phone is connected to a

PC. New and changed contacts are

synchronised in just the same way as

messages and appointments.

My stuff offers you a convenient op-

tion for managing ringtones, music,

playlists and videos. You can sore

your music files in your phone auto-

matically converting them into a

suitable format.

Notifier

If your phone is connected to a PC

you will always be notified on the PC

screen, if required, about incoming

calls or messages – even when the

phone is switched to mute.

Questions & Answers

115

Questions & Answers

If you have any questions about using your phone, visit us anytime at

www.siemens.com/mobilephonescustomercare.For additional help, we have listed

below some frequently asked questions and answers.

Configuration service

To help you set up your mobile phone for the data service WAP, MMS, e-mail and Internet,

you can use a configuration service. This service is used to have the necessary settings for

your mobile phone sent to you by SMS. We recommend that you contact your network

provider who will send you the configuration messages.

As an alternative you can also use the "Setting Configurator" at

www.siemens.com/mobilephonescustomercare. Siemens will then send you the

configuration messages. Please follow the instructions contained in those messages.

Problem

Poss. causes

Possible solution

Phone cannot be On/Off key not pressed long Press On/Off key for at least 2 seconds.

switched on.

enough.

Flat battery.

Battery contacts dirty.

Charge battery. Check charging indicator in the display.

Clean contacts.

See also below under

"Charging error".

Standby time is too Frequent use of organiser Restrict use if applicable.

short.

and games.

Fast search activated.

Deactivate speed search (page 87).

Display illumination

switched on.

Switch off display illumination (page 68).

Unintentional keystrokes

(illumination!).

Switch on Auto key lock (page 84).

Charging error

(charge icon not

displayed).

Battery totally discharged. 1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range: Make sure the ambient temperature is right, wait for a

5 °C to 45 °C.

while, then recharge.

Contact problem

Check power supply and connection to the phone.

Check battery contacts and telephone connection sock-

et, clean them if necessary, then insert battery again.

No mains voltage.

Wrong charger.

Battery faulty.

Use different mains power socket, check mains voltage.

Only use original Siemens accessories.

Replace battery.

116

Questions & Answers

Poss. causes

Problem

Possible solution

SIM error.

SIM card not inserted

correctly.

Check that the SIM card is inserted correctly (page 10).

Dirty SIM card contacts.

SIM card with wrong

voltage.

Clean SIM card with a dry cloth.

Use 3V SIM cards only.

SIM card damaged

(e.g. broken).

Carry out a visual check. Have service provider change

the SIM card.

No network

connection.

Weak signal.

Move higher, to a window or an open space.

Check service provider’s coverage area.

Complain to the service provider.

Outside the GSM range.

Invalid SIM card.

New network not authorised. Try manual selection or select a different network

(page 86).

Network call barring is set. Check network barrings (page 85).

Network overloaded.

Signal too weak.

Try again later.

Phone loses

network.

Reconnection to another service provider is automatic

(page 86). Switching phone off and on again can speed

this up.

Calls not possible. Second line set.

New SIM card inserted.

Set line 1

(page 87).

Check for new barrings.

Reset limit with PIN2 (page 36).

Load credit.

Charge limit reached.

Credit used up.

Some calls not

possible.

Call restrictions are in place. Barrings can be set by service provider. Check barrings

(page 85).

Impossible to make Phonebook/Addressbook

entries in Phone- is full.

book/Addressbook.

Delete entries in the Addressbook/Phonebook

(see Standard functions, page 17).

Voice message not Call divert to mailbox not set. Set call divert to mailbox (page 59).

functioning.

å flashes to

SMS memory is full.

MMS memory is full.

Phone memory full.

Delete SMS messages (see Standard functions,

page 17) or archive them (page 45).

Delete MMS messages (see standard functions,

page 17).

indicate an SMS.

æ flashes to

indicate an MMS.

ç flashes to

indicate an MMS.

Delete messages, pictures, videos, games or

applications.

Function cannot

be set.

Not supported by service

provider or registration

required.

Contact your service provider.

Questions & Answers

Possible solution

117

Problem

Poss. causes

Capacity problems Phone memory full.

with, for example,

Games & More,

Delete files in the relevant areas. You can use the

memory assistant to delete specific files (page 81).

ringtones, pictures,

videos, SMS

archive.

No Internet access, Profile not activated, profile Activate or set browser profile. If necessary consult your

downloading not

possible.

settings wrong/incomplete. service provider.

Message cannot

be sent.

Service provider does not Check with your service provider.

support this service.

Phone number for service Set service centre (page 47).

centre not set or incorrectly

set.

SIM card contract does not Contact your service provider.

support this service.

Service centre too busy.

Repeat message.

Recipient does not have a Check.

compatible phone.

EMS pictures are Destination phone does not

not displayed on

the destination

phone.

support the EMS standard.

No Internet access Incorrect browser profile set, Check browser settings; contact your service provider if

possible.

or wrong or incomplete

settings.

necessary.

PIN error/

PIN2 error

Three wrong entries.

Enter the PUK (MASTER PIN) supplied with the SIM

card according to the instructions. If the PUK (MASTER

PIN) has been lost, contact your service provider.

Phone code error. Three wrong entries.

Contact Siemens Service (page 119).

Contact your service provider.

Service provider

code error.

No authorisation for this

service.

Too few/too many Functions may have been Check with your service provider.

menu entries.

added or deleted by the

service provider via the

SIM card.

118

Questions & Answers

Poss. causes

Problem

Possible solution

No fax possible.

Wrong settings in the PC. Check settings.

No authorisation for this

service.

Contact your service provider.

Charge meter does Charge pulse is not being Contact your service provider.

not work.

transmitted.

Damage

Severe shock.

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat. Dry con-

nector contacts thoroughly. Stand mobile upright in an air current. Do notdismantle the

phone!

Reset settings to the factory default, page 82: # 9 9 9 9 #

Customer Care

119

Customer Care

Abu Dhabi .........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

Chile..................................................8 00 53 06 62

China ...........................................0 21 23 01 71 88

Colombia....................................01 80 07 00 66 24

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Ecuador ..........................................18 00 10 10 00

Egypt.................................................0 23 33 41 11

Estonia.................................................. 6 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany......................................0 18 05 33 32 26

Greece............................................80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy .................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 70 07 07 00

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

Malaysia....................................+ 6 03 77 12 43 04

We offer fast, individual advice! You have

several options:

Our online support on the Internet:

www.siemens.com/

mobilephonescustomercare

We can be reached any time, any place.

You are given 24 hour support on all as-

pects of our products. Here you will find an

interactive fault-finding system, a compila-

tion of the most frequently asked questions

and answers, plus user guides and current

software updates to download.

When calling customer service, please

have ready your receipt and the phone

identity number (IMEI, to display press

#06#), the software version (to display,

press #06#, then ) and if available,

your Siemens Service customer number.

You will also find the most frequently

asked questions and answers in the sec-

tion entitled "Questions & Answers" in this

user guide on page 115.

You can also get personal advice about our

range of products on our Premium Hotline:

United Kingdom ............................ 0906 9597500

(0.75 £ per minute)

Qualified Siemens employees are waiting to

offer you expert information about our

products and installation.

In some countries repair and replace servic-

es are impossible where the products are

not sold through our authorised dealers.

If repair work is necessary, please contact

one of our service centres:

120

Customer Care

Malta.......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 27 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Peru ..................................................0 80 05 24 00

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 09 99 66

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ........................................... 62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia ............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand ............................................0 27 22 11 18

Tunisia ................................................ 71 86 19 02

Turkey..........................................0 21 64 59 98 98

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Venezuela....................................0 80 01 00 56 66

Vietnam...........................................84 89 20 24 64

Zimbabwe ........................................... 04 36 94 24

Care and maintenance

121

Care and maintenance

Your phone has been designed and manu-

factured to the highest of standards and

should be treated with great care. The sug-

gestions below will help you to enjoy your

phone for many years.

The suggestions given above apply equally

to your phone, battery, charger and all ac-

cessories. If any of these parts is not working

properly, obtain fast and reliable help at our

service centres.

•

Protect your phone from moisture and hu-

midity. Precipitation, humidity and liquids

contain minerals that will corrode elec-

tronic circuits. Nevertheless, should your

phone become wet, disconnect it immedi-

ately from the power supply to avoid elec-

tric shock. Do not place your phone (even

to dry it) on/in a source of heat such as a

microwave oven, oven or radiator. The

phone may become overheated and

possibly explode.

Battery quality statement

The capacity of your mobile phone battery

will reduce each time it is charged/emptied.

Storage at too high or low temperatures will

also result in a graduly capacity loss. As

a result the operating time of your mobile

phone may be considerably reduced, evan

after a rull recharge of the battery.

Regardless of this, the battery has been de-

signed and manufactured so that it can be

recharged and used for six months after the

purchase of your mobile phone. After six

months, if the battery is clearly suffering from

loss of performance, we recommend that

your replace it. Please buy only Siemens

original batteries.

•

Do not use or store the phone in dusty,

dirty areas. Its moving parts may be

damaged and the casing may become

deformed and discoloured.

Do not store your phone in hot environ-

ments (e.g. vehicle instrument panel in

the summer). High temperatures can

shorten the life of electronic devices,

damage batteries and warp or melt cer-

tain plastics.

Do not store your phone in cold environ-

ments. When the phone warms up again

(to its normal ambient temperature),

moisture can form inside the phone,

which may damage electronic circuit

boards.

Do not drop, knock or shake your phone.

Rough handling can damage internal cir-

cuit boards!

Display quality

declaration

•

For technological reasons, a few small dots

with different colours may appear in the dis-

play in exceptional cases.

Just remember that the appearance of

brighter or darker dots generally does not

mean that a fault has occurred.

•

Do not use harsh chemicals, cleaning

solvents, or strong detergents to clean

the phone!

122

Product data

Phone ID

Product data

You will need the following information if

you lose your phone or SIM card:

the number of the SIM card (on the card):

..............................................................

15-digit serial number of the phone

(under the battery):

..............................................................

the customer service number of the service

provider:

..............................................................

Declaration of conformity

BenQ Mobile hereby declares that the phone

described in this user guide is in compliance

with the essential requirements and other

relevant provisions of European Directive

1999/5/EC (R&TTE). The relevant declara-

tion of conformity (DoC) has been signed.

Please call the company hotline if you re-

quire a copy of the original:

www.siemens.com/mobiledocs

Lost phone

If you lose your phone or SIM card, contact

your service provider immediately to pre-

vent misuse.

Technical data

GSM class:

Frequency range:

GSM class:

Frequency range:

GSM class:

Frequency range:

Weight:

4 (2 watt)

Operating time

880–960 MHz

1 (1 watt)

Talktime: up to 300 minutes

Standby time: up to 300 hours

1,710–1,880 MHz

1 (1 watt)

The operating time depends upon the re-

spective conditions of use. Extreme temper-

atures considerably reduce the standby

time. You should therefore avoid the leaving

the phone in the sun or on a radiator.

1,850–1,990 MHz

99 g

The following applications reduce the stand-

by time and can be deactivated if required:

• Flash (page 38)

• CB services (page 60)

• Screensaver (page 68)

• Illumination (page 68)

• IrDA (page 71)

Size:

103 × 47 × 18.5 mm

(84 ccm)

Li-Ion battery:

820 mAh

Operating

temperature:

–10 °C to 55 °C

1.8 and 3.0 V

SIM card:

• EGPRS (page 71)

• Bluetooth (page 72)

RS MultiMediaCard: max. 1 GB

• Fast search (page 87)

Accessories

123

Accessories

Fashion & Carry

Headset Stereo HHS-700

Stereo headset with key for enjoying music

and making phone calls.

Headset Bluetooth^®

Carrying Cases

Belt Case FCL-600

Energy

HHB-700 with EU mains adapter

HHB-710 with mains adapter for UK

HHB-720 with mains adapter for Australia

Elegant, small Bluetooth^®headset that is

very comfortable to wear.

Headset Bluetooth^®Stereo HHB-750

Stereo Bluetooth^®headset with integrated

display for high quality and convenient

handsfree talking and listening to music.

Li-Ion battery EBA-760 (820 mAh)

Spare battery

Travel Charger

Travel Charger EU ETC-500

Travel Charger UK ETC-510

Travel charger with an extended input

voltage range of 100–240 V.

Car Charger Plus ECC-600

Office

Data Cable DCA-500

For connecting the phone to the serial

RS232 port of the PC.

Charger for the cigarette lighter socket in

the car. It is possible to make phone calls

during charging.

Desk Top Stand EDS-600

Desk top stand charger for the phone.

Data Cable USB DCA-510

For connecting the phone to the USB port of

the PC. With charging function.

Handsfree Portable

Headset Basic HHS-500

Headset HHS-510

Data Cable USB DCA-540

For connecting the phone to the USB port of

the PC. With charging function.

Headset with PTT key (push to talk) to ac-

cept and end calls.

SyncStation DSC-600

Headset Purestyle HHS-610

Table support for the phone to facilitate

simultaneous data exchange and telephone

charging. Includes a desktop stand and a

USB data cable.

High quality headset with detachable

earphones and key to make/end phone

calls.

124

Accessories

Car Kit Portable HKP-500

Multitainment

The portable handsfree car kit can easily be

moved from one car to another. Simply plug

into the cigarette lighter socket, connect and

talk.

Flash IFL-600

Plug-in flash module for taking photos in are-

as with low ambient light.

Mobile Music Set IMS-700

Car Kit Bluetooth^®Portable HKW-700

The portable Mobile Music Set allows you

to listen to music on your mobile phone

anywhere you go and with excellent sound

quality. You can also play music over the

active loudspeaker so that others can also

share your enjoyment.

High-tech Bluetooth handsfree car kit with

no cable connection to the mobile phone. In-

stallation is easy - simply plug into the ciga-

rette lighter socket.

Car Kit Bluetooth^®HKW-710

Innovative Bluetooth^®handsfree kit with an

external display for making in-car calls safely

and conveniently.

Car Solutions

Mobile Holder HMH-765

Car Kit Bluetooth^®SIM HKW-720

Holds the mobile phone securely in the vehi-

cle. Ideal for use with headset or Car Kit

Portable.

Innovative Bluetooth^®handsfree kit with an

external display for making in-car calls

safely, conveniently, and with low power

consumption.

Mobile Holder Antenna HMH-760

The cradle for connecting an external anten-

na. Ideal for use with headset or Car Kit Port-

able. Can also be used as cradle for

retrofitting your handsfree car kit (from

series 55).

Optional Car Kit accessories

Car Data Adapter HKO-690

Car Kit Easy Upgrade HKO-700

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Car Kit Comfort Basic HKC-700

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Requires an

additional holder for the mobile phone

(Mobile Holder Antenna).

Siemens Original Accessories

www.siemens.com/shop

Car Kit Easy HKP-700

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and the flexible microphone position-

ing, the phone can be optimally adjusted to

suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

Guarantee certificate (UK)

125

Guarantee certificate (UK)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer's Guarantee under the condi-

tions set out below:

Products sold in the United Kingdom the

Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer's liability for death or personal in-

jury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either re-

place the device with another device re-

flecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casings,

small parts on casings, protective cover-

ings where included in the scope of deliv-

ery), this warranty shall be valid for six

months from the date of purchase.

• This Guarantee shall be invalid if the de-

vice defect is attributable to improper treat-

ment and/or failure to comply with

To invoke this Guarantee, please contact

our online support on the Internet

www.siemens.com/

mobilephonescustomercare or the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

information contained in the user manuals.

• This Guarantee shall not apply to or ex-

tend to services performed by the author-

ised dealer or the customer themselves

(e.g. installation, configuration, software

downloads). User manuals and any soft-

ware supplied on a separate data medium

shall be excluded from the Guarantee.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee de-

fault becoming evident.

• Ownership of devices or components re-

placed by and returned to Siemens shall

vest in Siemens.

• This Guarantee shall apply to new devices

purchased in the European Union. For

126

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer’s Guarantee under the condi-

tions set out below:

(e.g. installation, configuration, software

downloads). User manuals and any soft-

ware supplied on a separate data medium

shall be excluded from the Guarantee.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee de-

fault becoming evident.

• Ownership of devices or components re-

placed by and returned to Siemens shall

vest in Siemens.

• This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford In-

dustrial Estate, Dublin 18 - The Republic of

Ireland.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer’s liability for death or personal in-

jury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either re-

place the device with another device re-

flecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casings,

small parts on casings, protective cover-

ings where included in the scope of deliv-

ery), this warranty shall be valid for six

months from the date of purchase.

• This Guarantee shall be invalid if the de-

vice defect is attributable to improper care

or use and/or failure to comply with infor-

mation contained in the user manuals.

In particular claims under the Guarantee

cannot be made if:

• The device is opened (this is classed as

third party intervention)

• Repairs or other work done by persons not

authorised by Siemens.

• Components on the printed circuit board

are manipulated

• The software is manipulated

• Defects or damage caused by dropping,

breaking, lightning or ingress of moisture.

This also applies if defects or damage was

caused by mechanical, chemical, radio in-

terference or thermal factors (e.g.: micro-

wave, sauna etc.)

• Devices fitted with accessories not author-

ised by Siemens

• This Guarantee shall not apply to or ex-

tend to services performed by the author-

ised dealer or the customer themselves

To invoke this Guarantee, please contact

our online support on the Internet

www.siemens.com/

mobilephonescustomercare or the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

SAR

127

SAR

European Union (RTTE) and

international (ICNIRP)

INFORMATION ON RF EXPOSURE / SPE-

CIFIC ABSORPTION RATE (SAR)

THIS MODEL MEETS INTERNATIONAL

GUIDELINES FOR EXPOSURE TO

RADIO WAVES

The highest SAR value for this device when

tested at the ear was 0.533 W/kg¹. As mo-

bile devices offer a range of functions, they

can be used in positions other than the head,

such as on the body. In this case, a separa-

tion distance of 1.5 cm is required.

As SAR is measured utilizing the device's

highest transmitting power, the actual SAR

of this device while operating is typically be-

low that indicated above. This is due to auto-

matic changes to the power level of the

device to ensure it only uses the minimum

level required to reach the network.

The World Health Organization has stated

that present scientific information does not

indicate the need for any special precautions

for the use of mobile devices. They note that

if you nevertheless want to reduce your ex-

posure then you can do so by limiting the

length of calls or using a 'hands-free' device

to keep the mobile phone away from the

head and body.

Your mobile device is a radio transmitter and

receiver. It is designed not to exceed the lim-

its for exposure to radio waves recommend-

ed by international guidelines. These

guidelines were developed by the independ-

ent scientific organization ICNIRP and in-

clude safety margins designed to assure the

protection of all persons, regardless of age

and health.

The guidelines use a unit of measurement

known as the Specific Absorption Rate, or

SAR. The SAR limit for mobile devices is

2 W/kg and was adopted into the European

Standard EN 50360 and into other national

standards. The CE mark demonstrates that

the EU requirements are met.

Additional Information can be found on the

websites of the World Health Organization

(www.who.int/emf)

or Siemens

(www.siemens.com/mobilephones).

1 The tests are carried out in accordance

with international guidelines for testing.

128

Licence Agreement

This License Agreement ("Agreement") is

between You and Siemens Aktiengesells-

chaft, Germany (“Siemens”). The Agree-

ment authorizes You to use the Licensed

Software, specified in Clause 1 below, which

may be included in your phone, stored on a

CD-ROM, sent to You by electronic mail or

over the air, downloaded from Siemens Web

pages or servers or from other sources un-

der the terms and conditions set forth below.

1. LICENSED SOFTWARE. As used in

this Agreement, the term "Licensed Soft-

ware" means collectively: all the software in

Your phone, all of the contents of the disk(s),

CD-ROM(s), electronic mail and its file at-

tachments, or other media with which this

Agreement is provided and includes any re-

lated Siemens or third party software and

upgrades, modified versions, updates, addi-

tions and copies of the Licensed Software, if

any, distributed over the air, downloaded

from Siemens Web pages or servers or from

other sources.

2. COPYRIGHT. The Licensed Software

and all related rights, without limitation in-

cluding proprietary rights therein, are owned

by Siemens, its Licensors or affiliates and

are protected by international treaty provi-

sions and all applicable national laws. This

Agreement does not convey to You nor allow

You to acquire any title or ownership interest

in the Licensed Software or rights therein.

The structure, organization, data and code

of the Licensed Software are the valuable

trade secrets and confidential information of

Siemens, its Licensors or affiliates. You

must reproduce and include the copyright

notices with any permitted copies You make

of the Licensed Software.

Read this Agreement carefully before using

your phone. By using your phone or install-

ing, copying, and/or using the Licensed Soft-

ware, You acknowledge that You have read

and understood the Agreement and agree to

be bound by all of the terms and conditions

stated below. You further agree that if

Siemens or any licensor of Siemens ("Licen-

sor") is required to engage in any proceed-

ing, legal or otherwise, to enforce their rights

under this Agreement, Siemens and/or its Li-

censor shall be entitled to recover from You,

in addition to any other sums due, reasona-

ble attorney's fees, costs and disburse-

ments. If You do not agree to all of the terms

and conditions of this Agreement, do not in-

stall or use the Licensed Software. This

Agreement governs any Updates, releases,

revisions, or enhancements to the Licensed

Software.

3. LICENSE AND USE. Siemens grants to

You a non-exclusive, non-transferable end

user right to install the Licensed Software or

use the Licensed Software installed on the

phone. The Licensed Software is licensed

with the phone as a single integrated product

and may be used with the phone only as set

forth in these licensing terms.

Licence Agreement

129

4. LIMITATIONS ON LICENSE. You may

not copy, distribute, or make derivative

works of the Licensed Software except as

follows:

(a) You may make one copy of the Li-

censed Software, excluding the documenta-

tion, as an archival backup copy of the

original. Any other copies You make of the

Licensed Software are in violation of this

Agreement.

(b) You may not use, modify, or transfer

the right to use the Licensed Software other

than together with the accompanying hard-

ware or copy the Licensed Soft-ware except

as expressly provided in this Agreement.

the Licensed Software.

(d) You may not reverse engineer, decom-

pile, modify, or disassemble those Licensed

Software programs except and only to the

extent that such activity is ex-pressly permit-

ted by applicable law notwithstanding this

limitation.

Parts of the Licensed Software may be sup-

plied by third parties and may be subject to

separate license terms. Such terms are set

out within the documentation.

6. TERMINATION. This Agreement is ef-

fective from the first date You install, copy or

otherwise use the Licensed Software. You

may terminate this license at any time by

deleting or destroying the Licensed Soft-

ware, all back up copies and all related ma-

terials provided to You by Siemens. Your

license rights terminate automati-cally and

immediately without notice if You fail to com-

ply with any provision of this Agreement. The

rights and obligations under sections 2, 5, 6,

7, 9, 12 and 13 of this Agreement shall sur-

vive the termination of this Agreement.

7. YOU ACKNOWLEDGE THE LI-

CENSED SOFTWARE IS PROVIDED "AS

IS" AND NEITHER SIEMENS NOR ANY OF

ITS LICENSORS MAKE ANY REPRESEN-

TATIONS OR WARRANTIES, EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMIT-

ED TO THE WARRANTIES OF MER-

CHANTABILITY OR FITNESS FOR A

PARTICULAR PURPOSE OR THAT THE

LICENSED SOFTWARE WILL NOT IN-

FRINGE ANY THIRD PARTY PATENTS,

COPYRIGHTS, TRADEMARKS OR OTH-

ER RIGHTS. THERE IS NO WARRANTY

BY SIEMENS OR ITS LICENSORS OR BY

ANY OTHER PARTY THAT THE FUNC-

TIONS CONTAINED IN THE LICENSED

SOFTWARE WILL MEET YOUR REQUIRE-

MENTS OR THAT THE OPERATION OF

THE LICENSED SOFTWARE WILL BE UN-

INTERRUPTED OR ERROR-FREE AND

SIEMENS AND ITS LICENSORS HEREBY

DISCLAIM ANY AND ALL LIABILITY ON

ACCOUNT THEREOF. NO ORAL OR

WRITTEN INFORMATION OR ADVICE

GIVEN BY A SIEMENS REPRESENTATIVE

SHALL CREATE A WARRANTY OR IN ANY

WAY AFFECT THIS DISCLAIMER. YOU

ASSUME ALL RESPONSIBILITY TO

5. MISUSE OF THE LICENSED SOFT-

WARE OR DATA GENERATED BY THE LI-

CENSED SOFTWARE IS STRICTLY

PROHIBITED BY SIEMENS, MAY VIOLATE

GERMAN, U.S. AND OTHER LAWS AND

MAY SUBJECT YOU TO SUBSTANTIAL

LIABILITY. You are solely responsible for

any misuse of the Licensed Software under

this Agreement and for any liability or dam-

age related in any way to your use of the Li-

censed Software in violation of this

Agreement. You are also responsible for us-

ing the Licensed Software in accordance

with the limitations of this Agreement.

ACHIEVE YOUR INTENDED RESULTS

AND FOR THE INSTALLATION, USE, AND

RESULTS OBTAINED FROM IT.

130

Licence Agreement

8. NO OTHER OBLIGATIONS. This

Agreement creates no obligations on the

part of Siemens other than as specifically set

forth herein.

maintenance or support of products and

services.

11. EXPORT CONTROL. The Licensed

Software may include technical data and

cryptographic software and is subject to Ger-

man, European Union and U.S. export con-

trols and may be subject to import or export

controls in other countries. You agree to

strictly comply with all applicable import and

export laws and regulations. Specifically,

You agree, to the extent required by U.S. Ex-

port Administration Regulations, that You

shall not disclose or otherwise export or re-

export the Licensed Software or any part

thereof delivered under this Agreement to

(a) Cuba, Iran, Iraq, Libya, North Korea, Su-

dan, Syria or any other country (including a

national or resident of such country) to which

the U.S. has restricted or prohibited the ex-

port of goods or services.

12. APPLICABLE LAW AND FORUM.

The laws of Germany govern this Agree-

ment. No choice of law rules of any jurisdic-

tion will apply. The courts in Munich shall

settle any disputes arising out of or relating

to this Agreement provided you are a mer-

chant.

13. MISCELLANEOUS. This Agreement

represents the entire agreement between

You and Siemens relating to the Licensed

Software and (i) supersedes all prior or con-

temporaneous oral or written communica-

tions, proposals, and representations with

respect to its subject matter; and (ii) prevails

over any conflicting or additional terms of

any acknowledgement or similar communi-

cation between the parties during the term of

this License. Notwithstanding the foregoing,

some products of Siemens may require You

to agree to additional terms through an on-

line "click-wrap" license, and such terms

shall supplement this Agreement. If any pro-

vision of this Agreement is held invalid, all

9. LIMITATION OF LIABILITY. IN NO

EVENT SHALL SIEMENS, ITS EMPLOY-

EES, LICENSORS, AFFILIATES OR

AGENTS BE LIABLE FOR ANY DIRECT

DAMAGES, LOST PROFITS, DATA OR

BUSINESS, OR COSTS OF PROCURE-

MENT OF SUBSTITUTE GOODS OR

SERVICES, PROPERTY DAMAGE, INTER-

RUPTION OF BUSINESS OR FOR ANY

SPECIAL, INDIRECT, INCIDENTAL, EX-

EMPLARY, ECONOMIC, PUNITIVE OR

CONSEQUENTIALDAMAGES,HOWEVER

CAUSED, AND WHETHER ARISING UN-

DER CONTRACT, TORT, NEGLIGENCE,

OR OTHER THEORY OF LIABILITY, OR

ARISING OUT OF THE USE OF OR INA-

BILITY TO USE THE LICENSED SOFT-

WARE, EVEN IF SIEMENS IS ADVISED OF

THE POSSIBILITY OF SUCH DAMAGES.

THE LIMITATION OF LIABILITY SHALL

NOT APPLY IF AND TO THE EXTENT

SIEMENS´ LIABILITY IS MANDATORY UN-

DER THE APPLICABLE LAW E.G.

ACCORDING TO PRODUCT LIABILITY

LAW OR IN THE EVENT OF INTENTIONAL

MISCONDUCT, PERSONAL INJURY OR

DEATH.

10. TECHNICAL SUPPORT. Siemens has

and its Licensors have no obligation to fur-

nish You with technical support unless sepa-

rately agreed in writing between You and

Siemens or the applicable Licensor.

Siemens and where applicable its Licensors

in the Licensed Software shall be free to use

any feedback received from You resulting

from your access to and use of the Licensed

Software for any purpose including (without

limitation) the manufacture, marketing and

Licence Agreement

131

other provisions shall remain valid unless

such validity would frustrate the purpose of

this Agreement, and this Agreement shall be

en-forced to the full extent allowable under

applicable law. No modification to this

Agreement is binding, unless in writing and

signed by a duly authorized representative

of each party. This Agreement shall be bind-

ing on and shall inure to the benefit of the

heirs, successors, and assigns of the parties

hereto. The failure of either party to enforce

any right resulting from the breach of any

provision of this Agreement by the other par-

ty will not be deemed a waiver of any right re-

lated to a subsequent breach of such

provision or any other right hereunder. Not-

withstanding anything to the contrary in this

Agreement, Siemens and/or its licensors

may enforce its rights, including but not limit-

ed to copyright, trademark or trade names,

in accordance with the rules of law in each

country.

132

Menu tree

Contacts

All contacts

Groups

Online status

SIM

Filter

Call records

Calls missed

Calls received

Calls dialled

Delete records

Time/charge

Last call

All incom.calls

All outg. calls

Remaining units

Charge settings

Internet

URL/service provider

Downl. assist.

Enter URL

Bookmarks

Internet

History

Saved websites

Camera

Take a picture

Record video

Messages

Create new

SMS text

MMS

E-mail

Menu tree

133

Messages

Inbox

SMS, MMS

E-mail

WAP push

Draft

Sent

SMS,MMS

E-mail

SMS,MMS

E-mail

Inst. message

Voice mailbox

CB services

Receive CB

Read new CB

Topic list

Auto display

Use topic index

CB languages

Msg. archive

Templates

SMS,MMS

E-mail

Text modules

MMS templates

Message setup

Text zoom

Emoticons

Save after send

SMS setup

MMS setup

E-mail setup

WAP push set.

134

Menu tree

Organiser

Calendar

Appointments

Tasks

Notes

Dictat.machine

Time zones

Remote sync.

Games

Media player

Alarm clock

Extras

SIM services

My applications

Calc.

Unit converter

Online status

Sound recorder

Stopwatch

Countdown

Date calculator

My menu

My stuff

Setup

Profiles

Ringtones

Volume

Calls

Messages

Organiser

Alarm clock

Inst. message

Games

Startup melody

Shutdown mel.

Sound recorder

Menu tree

135

Setup

Themes

Display setup

Wallpaper

Logo

Screensaver

Start up anim.

Shutdown anim.

Own greeting

Big letters

Illumination

Vibration

Phone Pilot

Connectivity

IrDA

Bluetooth

EGPRS

EGPRS info

Bluetooth setup

Configura. set

Fax/data

Shortcuts

Call setup

Shortc.Softkeys

Navigation keys

Number keys

Key tones

Hide ID

Call waiting

Divert

Call screening

Any key answer

Minute beep

136

Menu tree

Setup

Phone setup

Language

Key tones

Info tones

Auto off

Memory assist.

File system

Licence manag.

Phone identity

Device manag.

Master reset

Clock

Time/date

Time zones

Time format

Date format

Begin of week

Buddhist year

Show clock

Auto time

Security

Auto key lock

Direct call

Only ¡

PIN codes

This SIM only

Certificates

Barrings

Menu tree

137

Setup

Network

Line

Network info

Choose netwrk

Auto network

Preferred netw.

Band selection

Fast search

User group

Accessories

Car Kit

Headset

USB charging

138

Index

Call waiting .................................. 26, 78

Calling................................................ 24

Calls received (call record) .................. 35

Camera .............................................. 37

Car Kit

Accessorie s ....................................... 123

Addressbook

New entry ...................................... 30

Alarm ................................................. 92

Alarm clock....................................... 105

All calls (diversion).............................. 78

All incoming (network barrings ).......... 85

Any key to answer .............................. 79

Appointments..................................... 91

Auto display

Settin g ........................................... 88

Care of phone .................................. 121

CB services ......................................... 60

Certificate s ......................................... 84

Charges.............................................. 36

Char ges/units ..................................... 36

Charging the battery .......................... 12

Charging via USB ................................ 89

Clock.................................................. 83

Codes................................................. 18

Conference ........................................ 27

Connection profiles ............................ 74

Connectivit y ....................................... 71

Converter........................................... 99

Countdown ...................................... 103

Cred it limit ......................................... 36

Currenc y converte r ........................... 100

Clock.............................................. 83

Time/charges.................................. 36

Auto key loc k ...................................... 84

Auto last number redial....................... 25

Band selection .................................... 87

Battery

Charging ........................................ 12

Inserting......................................... 10

Operating times......................1 2 , 122

quality declaratio n ........................ 121

Big letters ........................................... 68

Black list ............................................. 53

Bluetooth® ......................................... 72

Bookmarks (WAP) .........................61, 62

Browser .............................................. 62

Buddhist year...................................... 83

Date format........................................ 83

Device mana ger ................................. 82

Dialling code ...................................... 24

Dialling with number keys .................. 24

Dictating machine .............................. 94

Digital Rights Management................. 14

Display

Illumination ................................... 68

Language....................................... 80

Symbo l s ........................................... 8

Wallpaper....................................... 68

Diver t................................................. 78

DTMF tones (tone sequences)............. 29

Duration /charge s ................................ 36

Calculator ........................................... 98

Calendar............................................. 90

Call

Accepting/ending ........................... 25

Blocked .......................................... 85

Charge s .......................................... 36

Conference..................................... 27

Diverting ........................................ 78

Ending............................................ 24

Menu ............................................. 28

Putting on hold............................... 26

Rejecting ........................................ 25

Toggling (swapping)....................... 26

Call back............................................. 25

Call divert ........................................... 78

Call screening ..................................... 79

Call transfer ........................................ 28

Earpiece volum e ................................. 24

EGPRS ................................................ 71

E-mail

Receiving /reading........................... 50

Settings ......................................... 51

Writing........................................... 49

Emergency number ............................ 13

Extras................................................. 98

Index

139

Menu tree ........................................ 132

Message

Factory settings .................................. 82

Fast access.......................................... 76

Fast network searc h ............................ 87

Flash .................................................. 38

Formatting (phone memory)............... 81

Forwarding (call) ................................ 28

Frequency range................................. 87

CB.................................................. 60

E-mail ............................................ 49

MM S.............................................. 40

SMS ............................................... 40

Message memory full ......................... 46

Message type ..................................... 46

Microphone on/off.............................. 28

Minute beep....................................... 79

Missed c alls (call record )..................... 35

Mobile Phone Manager..................... 112

MultiMediaCard™ ............................. 111

Muting (microphone) ......................... 28

My menu.......................................... 104

My stuff ........................................... 109

Guarantee certificate ........................125

Handsfree talking................................ 26

Headset

Accessories...................................1 23

Setting ........................................... 89

Hide ID ............................................... 78

Highlighting mode.............................. 17

Home network.................................... 86

Hotline ............................................. 119

Network

Barring........................................... 85

Connection .................................... 86

Settings ......................................... 86

Notes ................................................. 93

Number b usy...................................... 25

Numbers dialled (call record) .............. 35

Identity number (IMEI )........................ 81

IMEI numbe r ....................................... 81

Inbox.................................................. 43

Info tone s ........................................... 80

Information services (CB) .................... 60

Infrared .............................................. 71

Inst. Message...................................... 54

International dialling code .................. 24

Internet .............................................. 62

IrDA (Infrared) .................................... 71

One number only ............................... 28

Only ¡ ............................................. 84

Operating times (battery) ........... 12 , 122

Organiser ........................................... 90

PC connection .................................... 19

Personal greeting ............................... 68

Phone code ........................................ 18

Phone data....................................... 122

Phone ID (IMEI) .................................. 81

Phone number memo......................... 24

Phone number transmission on/off ..... 78

Phone Pilo t ......................................... 70

Phone setup ....................................... 80

Photo ................................................. 37

Changing ....................................... 18

Control .......................................... 18

Entering ......................................... 13

Error ............................................ 117

Use ................................................ 18

PIN Codes........................................... 18

PIN2................................................... 18

Key tones......................................7 7 , 80

Last number redia l .............................. 24

Licence Agreement ........................... 128

Licence Manager................................. 81

Limit (duration/charges)...................... 36

Logo................................................... 68

Loss of phone, SIM card .................... 122

Mailbox .............................................. 59

Maintenance of phone...................... 121

Media player..................................... 106

Memory assistant................................ 81

140

Index

POP3 (e-mail)...................................... 75

Preferred networ k ............................... 86

Preventing accidental activation.......... 19

Product data ..................................... 122

Profiles

Phone............................................. 64

WAP ............................................... 63

Progress.............................................. 63

Prompt ............................................... 25

Provider logo ...................................... 68

PUK, PUK2 .......................................... 18

Putting a call on hold ....................26, 28

Sound recorder......................... 102 , 103

Sound recording............................... 102

Special characters............................... 20

Standard functions ............................. 17

Standby mod e .................................... 14

Standby time.............................. 12 , 122

Start up animation.............................. 68

Stopwatch........................................ 103

Stor.Internet p.................................... 63

Switching microphone on/off.............. 39

Switch ing off the phone

Automati c ...................................... 80

Manual .......................................... 13

Switching on (phone)......................... 13

Symbols ............................................... 8

Synchronisation ................................. 96

Questions & Answers ........................1 15

Receiving signa l .................................. 14

Records ..............................................3 5

Reminder............................................ 25

Remote synchronisation...................... 96

Ringtone setting ................................. 66

Ringtones .....................................6 6 , 70

T9 text in put ...................................... 21

Tasks.................................................. 93

Technical data .................................. 122

Text input

With T 9 .......................................... 21

Without T 9 ..................................... 20

Text mod ul e ....................................... 23

Themes .............................................. 67

This SIM only...................................... 84

Time zones............................. 13, 83, 95

Toggling............................................. 26

Tone sequence (DTMF )....................... 29

Safety precautions ................................ 3

Screensaver ........................................ 68

Second phone number........................ 86

Security .............................................. 18

Service centre (SMS )........................... 45

Service tones ...................................... 80

Setting time/date ................................ 83

Settings .............................................. 64

Short message (SMS) .......................... 40

Shown in the display............................. 8

Shut down animation ......................... 68

Silent alert .......................................... 69

SIM card

Clearing barrings ............................ 19

Inserting......................................... 14

Problems ...................................... 116

SIM services (optional )........................ 98

SMS

Lists................................................ 45

T9 input ......................................... 21

SMTP (e-mail) ..................................... 75

Software version................................. 81

SOS .................................................... 13

Upper and lowercase letters (T9) ........ 20

User group ......................................... 87

Video playback ................................. 106

Voice mailbo x..................................... 59

Volume

Earpiece volume............................. 24

Profiles........................................... 64

Ring ton e ........................................ 66

Wallpaper (display)............................. 68

WAP ................................................... 61

WAP push........................................... 53

White list............................................ 53

Toshiba 4006GAH User Manual
Star Candle Company VANGUARD 470000 User Manual
Sony Ericsson WALKMAN PHONE W980 User Manual
Sony CRX 160E User Manual
Sony CDX C7050X User Manual
Silvercrest KH 2289 User Manual
Sharper Image OQ314 User Manual
Seagate Barracuda ST3120022A User Manual
Pantech DM P100 User Manual
Panasonic EB GD52 User Manual