Siemens C70 User Manual

Siemens Aktiengesellschaft,

issued by Siemens Communications

Haidenauplatz 1

D-81667 Munich

Rights of modification reserved.

Designed for life

Siemens Aktiengesellschaft

www.siemens.com/c70

C70

CT70

Table of Contents

Con-

Safety precautions ......................3

Overview of phone (schematic) ...5

Display symbols ..........................7

Getting started ...........................9

Insert SIM card/battery ..............9

Charge battery ........................10

Changing CLIPIt™ covers .........12

Switch on/off, PIN entry ............13

Entering the PIN .....................13

Emergency number (SOS) .......13

General instructions .................15

Standby mode ........................15

Signal strength .......................15

Digital Rights Mgmt. (DRM) .....15

Main menu .............................15

Standard functions ...................17

Highlighting mode ..................18

Menu speed dialling ...............18

Security .....................................19

PIN codes ...............................19

Preventing accidental

activation ...............................20

Text entry .................................21

Calling .......................................25

My phone ..................................31

Default book .............................32

Addressbook .............................33

New entry ..............................33

Change entry ..........................35

Call entry ................................35

Groups ...................................36

Phonebook ............................... 37

New entry .............................. 37

Call (search for an entry) ........ 38

Chan ge entry ......................... 38

<Special books> ..................... 39

Call records .............................. 40

Time/charge ............................. 41

Camera ..................................... 42

Inbox ........................................ 44

SMS .......................................... 45

Write/send ............................. 45

Read ...................................... 47

Setting ................................... 49

MMS ......................................... 51

Create .................................... 51

Temp lates .............................. 53

Send ...................................... 54

Receive .................................. 55

Read ...................................... 56

Setting ................................... 57

Inst. message ........................... 59

Start menu ............................. 59

Contact lists ........................... 60

Start ch at ............................... 63

Msg. history ........................... 64

Setting ................................... 64

Voice message/mailbox ........... 66

CB services ............................... 67

See also Index at the end of this User Guide

Table of Contents

Surf & fun ................................. 68

Internet ................................ 68

Bookmarks ............................. 70

Games and Applications ......... 71

Downl. assist. ......................... 71

Setup ........................................ 73

Profiles .................................. 73

Themes .................................. 75

Display ................................... 76

Ringtones .............................. 78

Call setup ............................... 80

Phone setup ........................... 82

Clock ..................................... 84

Connectivity .......................... 85

Security ................................. 87

Network ................................ 89

Accessories ............................ 91

My menu .................................. 92

Fast access ............................... 93

Organiser ................................. 95

Calendar ................................ 95

Appointments ........................ 96

Tasks ..................................... 98

Notes ..................................... 98

Missed appts. ......................... 98

Dictat.machine ...................... 99

Time zones .......................... 100

Extras ......................................101

Walky Talky ..........................1 01

SIM services (optional) .........1 07

Alarm clock ..........................107

Sound recorder .....................108

Calc. .....................................109

Unit converter ......................1 09

Stopwatch ............................1 10

Countdown ..........................1 11

Remote synchronisation .......1 11

Media player ...........................1 13

My stuff ..................................1 14

Mobile Phone Manager ..........1 16

Questions & Answers .............1 19

Customer Care ........................1 22

Care and maintenance ...........1 24

Product data ...........................1 25

SAR – European Union (RTTE) .. 126

SAR – International (ICNIRP) ....1 27

Quality ....................................1 28

Accessories .............................1 29

Guarant ee certificate (UK) .....1 31

Guarantee certificate (IRL) .....132

Menu tree ...............................133

Index .......................................139

See also Index at the end of this User Guide

Safety precautions

Information for parents

Please read the operating instructions and safety precautions carefully before use.

Explain the content and the hazards associated with using the phone to your children.

Remember to comply with

legal requirements and local

restrictions when using the

phone. For example, in aero-

planes, petrolstations, hospitals

or while driving.

The SIM card may be removed.

Caution! Small parts like this

could be swallowed by young

children.

The mains voltage specified on

the power supply unit (V) must

not be exceeded. Otherwise

the charging device may be

destroyed.

Mobile phones can interfere

with the functioning of medical

devices such as hearing aids

or pacemakers. Keep at least

20 cm between phone and

pacemaker. When using the

mobile phone hold it to the ear

which is further away from the

pacemaker .F o r m or e i nformation

consult your doctor.

The mains adapter must be

connected to an easily accessi-

ble power socket to charge the

battery. After charging the bat-

tery, the charger can only be

switched off by unplugging it.

Do not use an optical magnifier

to look at the activated infrared

interface [Class 1 LED product

(classification as per

The ring tone (p. 78), info tones

(p. 82) and handsfree talking

are reproduced through the

loudspeaker. Do not hold the

phone to your ear when it rings

or when you have switched on

the handsfree function (p. 27).

Otherwise you risk serious

permanent damage to your

hearing.

IEC 60825-1)].

Do not open the phone. Only the

battery (100% mercury-free) or

SIM card may be replaced. You

must not open the battery under

any circumstances. Any other

changes to this device are

strictly prohibited, as they will

invalidate the type approval

required for operation of the unit.

Only use original Siemens bat-

teries (100 % mercury-free) and

charging devices. Otherwise

you risk serious damage to

health and property. The battery

could explode, for instance.

Safety precautions

Important:

Please dispose of unwanted

batteries and phones as permit-

ted by the laws in your country.

The phone may cause interfer-

ence in the vicinity of TV sets,

radios and PCs.

Use only Siemens original

accessories. This will avoid

potential risks to health or prop-

erty and ensure compliance

with all relevant regulations.

Improper use will invalidate the guarantee!

These safety instructions also apply to

Siemens original accessories.

Overview of phone (schematic)

A Call key

During a call:

Dial displayed/highlighted phone num-

bers/names, take calls. Show last

phone numbers dialled in standby

mode.

Set volume.

Call options.

B On/Off/End key

• Switched off: press and hold to switch

on.

• During a conversation or in an appli-

cation: press briefly to finish.

• In menus: press briefly to go back a

level.

Service provider

Press and hold to go back to standby

mode.

15.11.2004 10:15

NewMMS í Menu

• In standby mode: press and hold to

switch off phone.

Joystick

Press the joystick down verti-

cally to start an application or

function.

In standby mode:

Open main menu.

Open user profiles.

Open Phonebook/Addressbook.

Soft keys

The current functions of this key are

shown in the bottom line of the display

Open Inbox.

Start the camera.

as §Text§/symbol (e.g.

In lists, messages and menus:

5 Additional symbol to display which

function pressing the joystick has in

different situations (see p. 8).

Scroll up and down.

Back a level.

Has the same function as the

right soft key.

Overview of phone (schematic)

Integrated antenna

Do not obstruct the phone above the

battery cover unnecessarily. This

reduces the signal quality.

Loudspeaker

Display

Service provider

Infrared interface (IrDA)

Access to the Internet portal

Input keys

15.11.2004 10:15

NewMMS í Menu

* Ringtone

• Press and hold in standby mode:

Switch all audible signals on/off

(except alarm).

• Press and hold on incoming call:

Switch off ringtone for this call only.

Key lock

Press and hold in standby mode:

Switch key lock on/off.

Connection socket

For charger, headset, flash etc.

Connection for external antenna

Camera lens

" Mirror (depending on phone model)

Display symbols

Registered

Display symbols

Temporarily interrupted

Browser offline

Display symbols (selection)

Signal strength

Browser online

Charging

Browser via GPRS online

Battery charge level, e.g. 50 %

Browser no network

IrDA activated

Phonebook

Call records

IrDA transmission

Surf & fun/

Service provider portal

Events (selection)

Organiser

SMS memory full

Messages

MMS memory full

Phone memory full

No network access

Missed call

Camera

Extras

My stuff

Setup

Delete assistant

Message symbols (selection)

All calls are diverted

Ringer off

Unread

Read

Short ring (beep) only

Ringer only if the caller is stored

in the Phonebook.

Draft

Delivered

Alarm set

MMS not sent

MMS received

MMS read

Keypad locked

Auto answer feature on

Text input with T9.

Activated and available

T9Abc

MMS with DRM contents (p. 15)

Voice mail received

Display symbols

Camera symbols

Brightness

Zoom factor

White balance

Flash connected

Joystick symbols

Camera

Make call/accept call

Zoom

Getting started

• Place the SIM card flat in front of

the slot with the contact surface

facing downwards. Then push the

SIM card in using gentle pressure

3(ensure that the chamfered

corner is in the correct position).

Getting started

Insert SIM card/battery

The service provider supplies you

with a SIM card on which all the

important data for your line is

stored. If the SIM card has been

delivered in credit-card size, snap the

smaller segment out and remove

any rough edges.

^{Press the grooved area}1, then push

the battery cover towards the front

in the direction indicated by the

^arrow2.

• Insert the battery sideways into

^{the phone}4, then press it down-

^wards5until it clicks into posi-

tion.

• To remove, press the hook on the

^{right side}6outwards, turn the

phone over, and then shake out

the battery.

Getting started

• Push the battery cover onto the

^{side hooks}7, until it clicks into

position.

Charge battery

Charging procedure

The battery is not fully charged

when delivered. Plug charger cable

into the bottom of the phone, plug

power supply unit into a mains

power socket and charge for at least

two hours.

Additional information

Please switch off your phone before

removing the battery!

Only 3V SIM cards are supported. Please

contact your service provider if you have an

older card.

Display during charging.

Charging time

SIM card problems ..........................p. 119

An empty battery is fully charged

after about 2 hours. Charging is only

possible within a temperature range

of +5 °C to 45 °C. If the temperature

rises/falls 5 °C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be

exceeded.

Getting started

Operating times

Display while in service

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

Charge level display during opera-

tion (empty – full):

V W X

A beep sounds when the battery is

nearly empty. The charge level of the

battery is only displayed correctly

after an uninterrupted charging/dis-

charging cycle. You should therefore

not remove the battery unnecessarily

and where possible not finish the

charging procedure early.

Talktime: 100 to 300 minutes

Standby time: 60 to 250 hours

Charge icon not visible

If the battery has been discharged

fully, the charge icon is not immedi-

ately visible when the power supply

is plugged in. It will appear after up

to two hours. In this case the battery

is fully charged after 3 to 4 hours.

Additional information

The power supply unit heats up when used

for long periods. This is normal and not

dangerous.

If the battery is removed for longer than

30 seconds, the clock must be reset.

Only use the plug-in power supply unit

supplied!

Getting started

Assemble the phone

First insert the keypad mat

the faceplate. Ensure that it is sitting

exactly in place.

Changing CLIPIt™

covers

You can use CLIPIt™ covers (accesso-

ries) to personalise the appearance

of your phone as you wish.

into

Before changing the keypad or

faceplate, switch the phone off.

Dismantle the phone

Take off the battery cover and

remove the battery (see p. 10). To

remove the faceplate, insert the key

into the opening provided, apply

slight pressure

and turn it at the

*) If there are small pins at the bot-

tom of the faceplate: position the

tabs on both sides of the keypad mat

precisely on these pins. before car-

same time to open the lock.

Do not use the key to lift the phone

as this could damage the faceplate.

rying out step

Insert the phone into the bottom of

^{the upper faceplate}4and then

push it in carefully until it clicks into

position . Finally, replace battery

cover (see p. 10).

Switch on/off, PIN entry

Switching phone on/off

Emergency number

(SOS)

Press and hold the

On/Off/End key.

Only to be used in real emergencies!

By pressing the §SOS§ soft key you can

make an emergency call on any net-

work without a SIM card and without

entering a PIN (not available in all

countries).

Entering the PIN

The SIM card can be protected with a

4 to 8-digit PIN.

Enter the PIN using the

number keys. The charac-

ters

appear to

Switching on your phone

for the first time

****

ensure nobody can read

your PIN on the display.

Correct with ] .

Time/date

Set the clock correctly on a one-off

basis when getting started.

Confirm by pressing the

joystick. Logging on to

the network will take a

few seconds.

Press this key, then select

§Change§.

Additional information

Change PIN.......................................p. 19

Clear SIM card barring ......................p. 20

First enter the date

(day/month/year), then

the time (24 hours,

including seconds).

Press. The time and date

are updated.

Switch on/off, PIN entry

Time zones

Set the time zone for your area.

Select the city in the

desired time zone from

the list ...

§Set§

... and set it.

Copy SIM addresses

The first time the SIM card is

inserted, the entries on it can be cop-

ied to the Addressbook. Please do not

interrupt this procedure. During this

time do not accept incoming calls.

Follow instructions in the display.

You can also copy data from the

SIM card at a later time (p. 38).

General instructions

Standby mode

Digital Rights Mgmt.

(DRM)

Remember that your phone has Dig-

ital Rights Management. The use of

downloaded pictures, sounds or

applications can be restricted by the

suppliers, e.g. copy protection, use

for a limited period of time only,

number of times it can be used etc.

The phone is in standby mode and is

ready for use when the name of the

service provider appears on the dis-

play.

Press and hold the

On/Off/End key to return

to standby mode from

any situation.

Signal strength

Main menu

Strong receiving signal.

The main menu is displayed graphi-

cally with symbols:

[

A weak signal reduces the

call quality and may lead

to loss of the connection.

Change your location.

Call up from standby

mode.

Select the application

symbols.

Start an application.

General instructions

Main menu options

Symbols

§Options§

The following symbols are used to

explain operation:

Open menu.

Different functions are available

depending on the context.

Enter numbers or letters.

Big letters

Illumination

Help

Select between two font

sizes.

On/Off/End key

Set display illumination to

brighter/darker.

Call key

Display a help text.

Soft keys

Operating instructionsb

Menu controls

The steps needed to reach a function

are shown in a condensed form in this

user guide, e. g., to display record of

missed calls in condensed form:

Displays a soft-key func-

tion.

§Menu§

The joystick can be moved

in 5 directions.

Press the joystick vertically,

e.g., to call up the menu.

D F E

Press the joystick in the

direction indicated.

C ¢ ¢Calls missed

This comprises the following steps:

Function dependent on

service provider, may

require special registration.

Open main menu.

Select (highlight)

moving the joystick

upwards, then press verti-

cally down on the joystick

before using the joystick

to highlight Calls missed.

Confirm. The record is

opened.

Standard functions

Option menus

Text input T9 preferred: Activate/

(p. 21)

deactivate T9 input.

Functions which appear repeatedly

in the options menu are listed here.

Input language: Select

language for text.

§Options§ Open menu.

Rename

Capacity

Attributes

Rename selected entry.

Display memory capacity.

Edit

Open the entry to edit.

Display entry.

View

Display properties of the

highlighted object.

Delete/

Delete all

Delete entry / delete all

entries after confirmation.

Help

Display help text.

New entry

Send...

Create new entry.

Selecttransmissionservice

and medium for sending.

Reply/

Reply to all

The sender becomes the

recipient. The received text

is transferred into the new

message.

Save

Store entry.

Save to 9

Save recipients in the cur-

rent address directory.

Sort

Set sort criteria

(according to alphabetical

order, type, time).

Standard functions

Highlighting mode

Menu speed dialling

With some applications (e.g. Phone-

book/Addressbook) one or more

entries in a list can be highlighted to

carry out a function jointly.

All menu functions are numbered

internally. A function may be

selected directly by entering these

numbers in sequence. These num-

bers are shown in the top right of the

display.

§Options§

Open menu.

Mark

Activate highlighting

mode.

E.g., write new SMS

(from standby mode):

If a non-highlighted entry is selected,

this can be highlighted:

Press to display the main

menu. Then press

§Mark§

The current entry is high-

lighted.

for Messages, then

If a highlighted entry is selected, the

highlighting can be deleted:

for Create new, then

§Unmark§ Dehighlight the current

for SMS text.

entry.

Additional highlighting functions:

Mark all

Highlight all entries.

Unmark all

Delete highlighting on all

marked entries.

Delete

marked

All selected entries are

deleted.

Security

The phone and SIM card are pro-

tected against misuse by several

security codes.

C _¢¢T_PIN¢_coS_dee_scurity

¢Select function.

Keep these security codes in a safe

place where you can access them again

if required.

PIN control

The PIN is usually requested each

time the phone is switched on. You

can deactivate this feature but you

risk unauthorised use of the phone

together with your SIM card. Some

service providers do not permit deac-

tivating the control.

PIN codes

Protects your SIM card

(personal identification

number).

§Change§ Press.

PIN2

This is needed to set the charge

detail display and to access

additional functions on special

SIM cards.

Enter PIN.

Confirm input.

PUK

PUK2

Key code. Used to unlock

SIM cards after the wrong PIN

has been entered repeatedly.

Change PIN

You can change the PIN to any

4 to 8-digit number you find easier

to remember.

Phone

code

Protects your phone. Must be

entered at the first security

setting.

§Select§

Press.

Enter current PIN.

Press.

_J_,C

Enter new PIN.

Repeat new PIN.

Security

Preventing accidental

activation

C _¢¢T_PIN¢_coS_dee_scurity

¢Select function.

Even if PIN control is deactivated

(p. 19) confirmation is required to

switch on the phone.

Change PIN2

(Display only if PIN2 is available).

Proceed as for Change PIN.

This prevents accidental activation

of the phone, e.g. when you are car-

rying it in a bag or when you are trav-

elling in an aircraft.

Chg.phonecode

(Change phone code)

Press and hold.

§OK§

You define the phone code

(4 to 8 digits) when you call up a

phone-code protected function for

the first time (e.g. Direct call, p. 30).

It is then valid for all phone code-

protected functions.

Following the third unsuccessful

attempt, access to the phone code

and the functions that use it is

denied. If this occurs, contact the

Siemens Service (p. 122).

Press. The phone

switches on.

Press this key or take no

action. The phone does

not switch on.

§Cancel§

Clear SIM card barring

If the PIN is entered incorrectly three

times, the SIM card is barred. Enter

the PUK (MASTER PIN) provided by

your service provider with the

SIM card in accordance with the

instructions. If the PUK (MASTER PIN)

has been lost, please contact your

service provider.

Text entry

Press briefly: Special char-

acters are shown.

Text entry without T9

Press number key repeatedly until

the required letter appears. After a

brief interval the cursor will advance.

Example:

Press and hold: Open input

menu.

Press once/repeatedly:

. , ? ! ’ " 0 + - ( ) @ / : _

Press once briefly to write

the letter a, twice to write

b etc.

Press and hold: Writes 0.

Writes blank. Press twice =

line break.

Press and hold to write the

number.

Ä,ä,1-9

Umlauts and numbers are

displayed after the rele-

vant letters.

Special characters

Press briefly. The symbols

chart is displayed

Press briefly to delete the

letter before the cursor;

press and hold to erase the

whole word.

]

)

’

;

[

{

(

)

]

}

€

@ \

Move the cursor

(forwards/back).

∆

Θ Λ

Press briefly: Swap

between abc, Abc, abc,

Φ Ψ Ω

Abc, 123. Status shown

¹) Line break

in top line of display.

Navigate to characters.

Confirm.

Press and hold: All input-

variants are displayed.

§Select§

Text entry

§Select§

Confirm. The new lang is

set. Languages with T9

support are marked with

the T9 symbol.

Input menu

With text input:

Press and hold. The input

menu is displayed:

Writing with T9

The display changes as you proceed.

Text format (SMS only)

Input language

Mark

It is therefore best if you finish a word

without looking at the display.

Copy/Insert

Simply press the keys once only

where the relevant letter is located.

For "hotel", for example:

Text entry with T9

"T9" deduces the correct word from

the individual key entries by making

comparisons with an extensive

dictionary.

Press briefly for ^T9Abc then

4 6 8 3 5

A blank space or moving

to the right ends the

word.

Activate, deactivate T9

§Options§ Open text menu.

T9 input Select.

Do not use special characters such

as Ä. Use the standard characters

instead, e.g. A; T9 will do the rest for

you.

§Change§ Activate T9.

Select input language

Select the language in which you

want to compose your message.

T9 Text Input is licensed under one or more of

the following: U.S. Pat. Nos. 5,818,437,

5,953,541, 5,187,480, 5,945 928 and 6,011,554;

Canadian Pat. No. 1,331,057;

United Kingdom Pat. No. 2238414B;

Hong Kong Standard Pat. No. HK0940329;

Republic of Singapore Pat. No. 51383;

Euro.Pat. No. 0 842 463 (96927260.8)

DE/DK, FI, FR, IT, NL, PT, ES, SE, GB;

and additional patents are pending worldwide.

§Options§ Open text menu.

Input language

Select.

Select language.

Text entry

T9 word suggestions

Correct a word

If several options are found in the

dictionary for a key sequence

(a word), the most probable is dis-

played first. If the word you want has

not been recognised, the next sug-

gestion from T9 may be correct.

Move left orright, word by

word, until the required

word is §highlighted§.

Scroll through the T9

word suggestions again.

]

Deletes the last character

in a word and displays a

new possible word.

The word must be shown §highlighted§.

Then press

The displayed word is

Additional information

replaced with a different

word. If this word is also

incorrect, press

Within a "T9 word", individual letters may

not be edited without first removing the T9

status. In most cases it is better to rewrite

the complete word.

Press until the correct

word is displayed.

Set a full stop. The word is

If the word you want is not in the dic-

tionary, it can also be written with-

out T9.

concluded if it is followed by

a space. Within a word, a full

stop represents an apostro-

phe or hyphen:

To add a word to the dictionary:

e.g. §Provider.s§ = provider’s.

§Spell§

Select.

Moving the cursor to the right

ends the word.

The last suggestion is deleted and

the word may now be entered with-

out T9 support. Press §Save§ to add it

automatically to the dictionary.

Press briefly: Swap between

abc, Abc, ^T9abc, ^T9Abc, 123.

Status shown in top line

of display.

Press and hold: All input

modes are displayed.

Press briefly: Select special

characters (p. 21).

Press and hold: Opens input

menu (p. 22).

Text entry

Use Text modules

Text modules

Text modules can be stored in the

phone for adding to your messages

(SMS, MMS).

Write message

(SMS, MMS).

§Options§ Open text menu.

Write Text modules

Insert...

Select.

C ¢M ¢Text modules

Select Text modules.

Select text module from

the list.

Select.

The input field is opened.

§Select§

Confirm. The text module

is displayed.

Write Text modules.

Confirm. The text module

is inserted in the message

to the right of the cursor.

§Options§ Open menu and select

Save. Accept the specified

name or allocate a new

one.

Save.

Calling

Dialling with number

keys

The phone must be switched on

(standby mode).

Set volume

Regulate the volume

(only possible during

a call).

If a Car Kit is used, its volume setting

will not affect the usual setting on

the phone.

Enter the number (always

with dialling code / inter-

national dialling code).

]

A short press clears

Redial previous numbers

the last digit, a long press

clears the entire phone

number.

To redial the phone number last

called:

Press the Call key.

The displayed phone

number is dialled.

Press the Call key twice.

To redial other numbers that were

dialled previously:

End call

Press the Call key once.

Press the End key briefly.

Press this key even if the

person on the other end

of the line has hung up

first.

Pick out the phone

number from the list,

then to dial press the …

... key.

Calling

Reminder

If the number is busy

A beep reminds you to

redial the displayed

phone number after

15 minutes.

§Prompt§

If the called number is busy or can-

not be reached because of network

problems several options are availa-

ble (depending on the service pro-

vider). An incoming call or any other

use of the phone interrupts these

functions.

Additional information

Store phone number in the

Addressbook/Phonebook.

Either

Switch on Handsfree (play-

back through loudspeaker).

Always switch off "handsfree

talking" before holding the

phone to your ear. This will

avoid damage to your hearing.

§Handsfr.§

Auto. redial

§Auto dial§ The phone number is

dialled automatically up

to ten times at increasing

time intervals. End with:

Press and hold to switch

microphone off.

B End key.

International dialling codes

Press and hold until a "+" is

displayed.

Call back

§Country§ Press and select country.

§Call back§ Your phone rings when

the busy number is free.

Press the Call key to dial

the number.

Phone number memo

You can enter a phone number during the

call. The person to whom you are speaking

can hear these entries. When the connec-

tion has ended you can save or dial the

phone number.

Calling

Accept call

The phone must be switched on. An

incoming call will interrupt any other

use of the phone.

Handsfree

You can put the phone down during

a call. You can then use the loud-

speaker to hear the caller.

Press.

§Handsfr.§ Activate handsfree talking.

Switch on.

Press.

Use the joystick to adjust

the volume.

A phone number transmitted by the

network is displayed, along with the

associated name (where applicable

with picture) if this is stored in the

Phonebook/Addressbook (p. 34).

§Handsfr.§ Deactivate.

Warning!

Always switch off "handsfree talking"

before holding the phone to your ear!

Otherwise, you will damage your hearing!

Reject call

§Reject§

Press.

Swap between

two calls

Press briefly.

Warning!

Establish a second connection

You can call another number during

a call.

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

§Options§ Open call menu.

Hold

The current call is put on

hold.

Additional information

Press and hold to switch off

Now dial the new phone

number or select

the ringing tone and vibration.

Missed call display.

§Options§, Phonebook/

Addressbook, and select

phone number.

Calling

When the new connection

is established:

End call(s)

Press the End key.

Swapping between calls.

§Swap§

After the Return to held call? display,

Incoming calls during a call

you have the following selection:

You may need to register for this

service with your service provider

and set your phone accordingly

(p. 80). During a call, you may be

advised that there is another call

waiting. You will hear a special tone

during the call. You have the follow-

ing options:

§Yes§

You accept the call on

hold.

§No§

You end the second call.

• Accept the waiting call in addition to

the first.

Accept the waiting call,

putting the current call on

hold to do so.

§Swap§

Always proceed as above to swap

between the two calls.

• Reject the waiting call

§Reject§

Press.

The waiting call is

diverted, for example, to

the mailbox.

§Divert§

•

Accept the waiting call and end the

current call

End the current call.

Accept new call.

Calling

Conference

Call options

Call up to 5 parties one by one and

link them together in a multiparty

call. Some of the functions described

may not be supported by your serv-

ice provider or may have to be ena-

bled specially.

The following functions are only

available during a call:

§Options§ Open menu.

Hold

Hold current call.

Microphone

If switched off, the person

on the other end of the line

cannot hear you (muting).

A connection has already been

established:

Also: Press and hold.

Open menu and select

Hold. The current connec-

tion is maintained.

§Options§

Handsfree

Volume

Call via the loudspeaker.

Adjust handset volume.

Now dial a new number.

When the new connec-

tion is established ...

Default book

Display Phone-

book/Addressbook.

... open menu and select

Conference. The held call is

joined.

Conference

Time/charge

§Options§

(See p. 29)

Display talktime that has

elapsed so far and (if set)

cost incurred during the

call.

Repeat procedure until all partici-

pants are linked together

(up to 5 participants).

Send DTMF

Enter control codes (num-

bers) for remote inquiries

to an answering machine.

End

All calls in the multiparty

conversation are ended

when the End key is

pressed.

Call

Connect the original call

with a second call. For you,

both calls are now ended.

transfer=

Main menu

Call status

Access to the main menu.

List all held and active calls

(e.g. participants in a con-

ference).

Calling

Direct call

Control codes (DTMF)

If this is active, only one number can

You can, for example, enter control

codes (numbers) for remote access

to an automatic answering machine

while another connection exists. These

entries are transmitted directly as

DTMFcodes (control codes).

be dialled.

Switch on

C ¢_¢DT_ire¢_ctS_cae_lc_lurity

Open menu.

§Options§

Confirm selection.

Send DTMF

Select.

Enter phone code.

Using the Phonebook/

Addressbook

When first prompted you define and

enter the phone code (4 - 8 digits).

Store phone numbers and control

codes (DTMF codes) in the Phone-

book/Addressbook in the same way

as a normal entry, see p. 32.

Confirm selection.

Please do not forget this code (p. 19)!

Select phone number

from the Phone-

book/Addressbook or

enter it.

Enter phone number.

Press and hold until a "+"

appears in the display

(wait for the connection

to be established).

Apply

Confirm.

Enter DTMF codes

(numbers).

To dial the phone number

(e.g. Carol’s phone

§Carol§

number), press and hold

the right soft key.

If necessary, wait again

for three seconds at a

time for the receiver to

Switch off

process the entries safely.

Press and hold.

Enter a name.

§Save§

Enter phone code.

Confirm input.

Store entry.

You may also store just the

DTMFcodes (numbers) and then

send them during the call.

My phone

Adjust your phone according to your

own wishes in the following ways to

give it a personal touch:

Where do I get what?

You can purchase additional ring-

tones, logos, animations and Java

applications from your service pro-

vider or directly from Siemens.

Ringtones (p. 78)

Assign individual ringtones to caller

groups or special dates.

Service provider portal

Pictures (p. 114)

Depending on your service provider,

you will find direct access to his por-

tal on your telephone via menu

items or bookmarks. Please contact

your service provider for more infor-

mation on these services.

Assign individual pictures or photos

to your Addressbook entries.

Animations (p. 77)

Choose a start-up and closing anima-

tion as well as a personal greeting.

Screensaver(p. 76)

Choose an analogue or digital clock,

or a personal picture.

Siemens City Portal

You will find additional ringtones,

logos, animations and screensavers

as well as more application, games

and services on the Internet at this

address:

(Operator) Logo (p. 76)

Choose an individual picture (to be

displayed in standby mode).

www.siemens.com/c70

Wallpaper (p. 76)

Or you can download them directly

via Browser:

Choose your own permanent back-

ground image.

wap.siemens.com/c70

Colour scheme (p. 76)

You will also find a service for saving

data here as well as a list of the coun-

tries in which these services are

available.

Select a colour scheme for the user

interface.

Applications (p. 71)

Download your own applications

from the Internet.

My menu

Create your own menu (p. 92) with

frequently used functions, phone

numbers or Browser pages.

Default book

Addressbook

Default book

C _¢¢L_{Select function.}

A lot of data can be recorded in the

Addressbook for each entry, and

additional functions (e.g., pictures,

birthdays) can be used.

Show entries

Phonebook

The entries in the default book

(Addressbook or Phonebook) are

shown.

The Phonebook is located on the SIM

card. Only one phone number can be

entered per entry. The Phonebook

on the SIM card can easily be trans-

ferred into a different phone.

^J^/I

Select a name with the

first letter and/or scroll.

New entry

Business card

Create your own business card to

send to a different GSM-phone. If no

business card has been created yet,

you will be asked for your input.

Create new entry.

Addressbook (see also p. 33)

Phonebook (see also p. 37)

Move from field to field to

enter your details.

§Save

Default book

You can set which directory you pre-

fer to use.

Press.

Additional information

The selected default book is opened

in standby mode with the joystick.

The content of the business card and the

Addressbook entries correspond to inter-

national standards (vCard).

Open Phonebook or

Addressbook

Copy numbers from

Addressbook/Phonebook.

Groups

See p. 36.

See p. 39.

Addressbook

Possible input fields:

Addressbook

Last name:

URL:

The Addressbook can store up to

1000 entries, each with a variety of

phone numbers and additional

address details. These entries are

managed separately from those in

the Phonebook in the phone mem-

ory. However, you can exchange

data between the Addressbook and

the Phonebook on the SIM card.

First name:

Inst. message >>

Group:

Phone number:

Phone no./office: Company:

Phone no./mobile: Address: >>

Fax:

Birthday: >>

Picture:

Fax 2:

E-mail:

E-mail 2:

All fields

New entry

The Addressbook is set as standard:

Additional information:

Group: Assignment to a group

(p. 36).

Open Addressbook

(in standby mode)

Address: Extension to enter the

Display input fields.

complete address:

Street:, Post code:, City:,

Country:

Select required input

fields.

Inst. message

Fill in input fields. The

maximum number of

characters available is

shown at the top of the

display.

Information if the entry is

being used as a contact

for Inst. Message or Walky

Talky:

Nickname:, Walky Talky ID:,

Walky Talky type: WV user

ID:, ICQ number:, AIM screen

name:

At least one name must

be entered. Always enter

phone number with

dialling code.

Addressbook

Birthday: After activation, the date

Display / find entry

of birth is entered.

Open Addressbook

Reminder: The phone

reminds you at the time

entered one day before

the birthday.

(in standby mode).

Select required entry.

Display.

Picture:

Assign a picture to the

entry. It is displayed if you

are called by one of the

corresponding phone

numbers.

Display options

§Options§ The options menu only

offers the functions for

the currently selected

input field.

All fields/Reduced fields

Displays the required

input fields.

Move to ...

Assign current entry or

highlighted entries to a

group.

§Save§

Save the entry.

Additional information

Temporary switch to Phone-

book.

View

Display an assigned

picture.

Copy to SIM

Copies name and one

phone number to the

SIM card (Phonebook).

Synchronisation

You can use the mobile phone manager

(p. 116) to synchronise your Addressbook

with Outlook^®and other Siemens

telephones.

New SMS, New

MMS

Create a message with

the selected entry.

Using Remote syncr. you can synchronise

your mobile with an organiser stored on the

Internet (see also p. 111).

Browser

Start Browser and visit

URL.

Com. services

Begin dialogue, p. 59.

Completing phone numbers

see p. 39

(For standard functions see p. 17)

Addressbook

Change entry

Addressbook options

Open Addressbook

Depending on the actual situation,

different functions will be offered.

These functions can be applied to

the entry currently selected as well

as to multiple selected entries:

(in standby mode).

Select required entry.

Press.

§Edit§

§Options§ Open menu.

Select input field.

Open entry if necessary.

Make changes.

Save.

Move to ...

Copy to SIM

Filter

Copy current entry or high-

lighted entries to a group.

§Edit§

Copies name and number to

the SIM card (Phonebook).

§Save§

Only those entries which

match the filter criteria are

displayed.

Call entry

Import

Sort

Set up readiness to receive

for a Phonebook entry via

IrDA (p. 85) or SMS (p. 45).

Open Addressbook

(in standby mode).

Select a name with the

first letter and/or scroll.

Specify sorting criteria for

output of the Addressbook

entries.

The number is dialled.

If there are several numbers in the

address book entry, these are

offered for selection.

Enter search term.

(For standard functions, see p. 17)

Select phone number.

The number is dialled.

Addressbook

Ringtone for group

Assign a ringtone to a group that

plays when one of its members calls

you.

Groups

Nine groups are specified in your

phone to enable you to arrange your

Addressbook entries clearly. You can

rename seven groups.

C ¢_¢T_Gro¢_upR_ci_an_llg_stones

Open Addressbook

(in standby mode).

Select group.

<Groups> Select (the number of

entries is listed behind the

group name).

Confirm. If a ringtone has

already been set, it will be

played. Otherwise, the

ringtone list will be dis-

played and you can select

one.

Select group.

Groups menu

§Options§

Open menu.

I _{If necessary, select a}

ringtone.

Rename

group

Change name of group.

Confirm.

Group

symbol

Assign a symbol to a group.

The symbol must then appear

in the display when one of the

group members calls.

Additional information

No group: Contains all Addressbook

entries that do not belong to a group (name

cannot be changed).

Received: Contains Addressbook entries

received by IrDA (p. 85) or SMS (p. 45)

(name cannot be changed).

Phonebook

Phone number:

Phonebook

Always enter phone number with

dialling code. An entry is not saved

without a phone number.

Entries in the Phonebook (on the

SIM card) are managed separately

from the Addressbook. You can, how-

ever, exchange data between the

Phonebook and the Addressbook.

Name:

Enter first and/or last names.

Group:

New entry

If the Phonebook has been selected

as standard:

Default No group

Important phone numbers may be

combined in a group (VIP).

Location:

Default SIM

Open Phonebook

(in standby mode).

Special SIM cards can save phone

numbers in a protected area

(Protected SIM) (PIN2 required).

Select <New entry>.

Display input fields.

Record number:

Select input field.

Each entry is automatically assigned

a record number. You can also dial

using the record number.

Fill in input fields.

The maximum number of

characters available is

shown at the top of the

display.

§Save§

Press to store the new

entry.

Additional information

Temporary switch to Address-

book.

§Country§ International

dialling code.......................................p. 26

Functions related to Text entry ..........p. 21

Phonebook

Call (search for an entry) Phonebook options

Open Phonebook.

The following functions are availa-

ble, depending on the current situa-

tion.

Select a name with the

first letter and/or scroll.

§Options§

Open menu.

Phone number is dialled.

Copy into 9

Copy all highlighted

entries to the

Addressbook.

Call using record no.

A record number is automatically

assigned to every new entry in the

Phonebook.

Copy all to 9

Copy all entries to the

Addressbook.

Enter record number.

Delete all

The whole Phonebook

is deleted.

Press.

PIN-protected.

Import

Set up readiness to

receive for a Phone-

book entry via IrDA

(p. 85) or SMS (p. 45).

Press.

Change entry

Select entry in

(For standard functions, see p. 17)

§Edit§

Phonebook.

Press.

Select input field

required.

Make changes.

Press.

§Save§

Phonebook

There might be phone numbers

saved in your Phonebook that have

been provided by your service pro-

vider. They may be used to call local

or national information services or to

use services offered by your service

provider.

Open Addressbook

(in standby mode).

Select.

Enter "own" phone numbers in

Phonebook (e.g., fax) for informa-

tion. These numbers can be

changed, deleted and also sent as an

SMS message.

Completing phone numbers in the

Phonebook

Digits may be replaced by a "?" when

phone numbers are entered in the Phone-

book:

Press and hold.

Display the phone numbers saved in

the VIP group.

These wildcards must be replaced with

numbers before dialling (e.g., with the

extension numbers in a phone system).

To make a call, select the phone number

from the Phonebook/Addressbook.

Entries stored in the Phonebook on

the SIM card can also be used on

other GSM phones.

Press.

Replace "?" with numbers.

Number is dialled.

On special SIM cards, phone num-

bers can be stored in a protected

location. PIN2 is required for editing.

Call records

Calls missed

Call records

The phone numbers of calls that you

have received but not answered are

stored for callback purposes.

The phone number of a caller is dis-

played if

• the caller has switched off the

Incognito function and

Icon for missed call

(in standby mode).

Press the display key

beneath the symbol to

call up the Inbox (p. 44).

• the network supports the

"Caller Identity" function.

Alternatively, a caller’s name is dis-

played if it is stored in the Phone-

book/Addressbook.

Calls received

Accepted calls are listed.

Your phone stores the phone num-

bers of calls for convenient redial-

ling.

Calls dialled

Access to the last numbers dialled by

you.

C ¢

Fast access in standby

mode.

Select record.

Delete records

The records are deleted.

Open record.

Select phone number.

Dial phone number.

Call list menu

The records menu can be called up if

an entry is highlighted.

§Options§ Open menu.

§View§

Display information on

the phone number.

Copy into 9 /

Copy to SIM

Copy the currently

selected phone number

into the preferred direc-

tory.

Up to 500 entries are stored in

the records:

(For standard functions see p. 17)

Time/charge

You can display the charges and

duration during a call. You can set a

unit limitation for outgoing calls.

Account limit

(PIN2 prompt)

Special SIM cards allow you or the

service provider to define a credit

limit or a period after which the

phone is barred for outgoing calls.

C ¢ ¢Time/charge

Select:

Last call

All incoming

All outg. calls

Remain. units

§Edit§

Press.

Enter PIN2.

Account limit

Switch on.

Scroll through the display.

§Reset§

Open menu.

Enter number of units.

Reset the selected setting.

§OK§

Confirm.

Charge sett.

Then confirm the credit or reset the

counter. The status display for pre-

paid cards may vary, depending on

the service provider.

Open menu.

Currency

Enter currency.

Auto display

Call duration and charges are

displayed automatically.

Personal rate

(PIN2 prompt)

Enter the currency as well as the

charge per unit and time.

Camera

You can view photos recorded on

the integrated camera immediately

and

pectedly. Information about the

selected resolution is located under

the preview image.

• use the photo as a background

image, logo, a switch on/off

animation or a screensaver.

Ù Ú Û ×

• send the photo via MMS.

Switch on

C ¢

Start camera in standby

mode.

î Options

Photo

The current (preview) image is dis-

played. You will see the following in

the first line from left to right:

Record

Takes a photo.

Brightness

Displays the preview

image of the next photo.

Zoom factor

White balance

Flash connected.

The photo is saved with a name, the

date and the time. To enter the

name see Setup in the options menu.

Settings prior to taking a photo:

The number of photos that can still

be taken in the selected resolution is

displayed in the top right-hand cor-

ner of the preview image. As the

memory requirement depends

Sets the brightness.

Sets the zoom factor.

essentially on the subject photo-

graphed and the resolution, the

number of photos that are still possi-

ble can sometimes change unex-

Camera

Image resolution

It is possible to set the quality of the

image regardless of the preview

image resolution, e.g.:

Camera options

The following functions are available,

depending on the current situation.

§Options§ Open menu.

Premium

Medium

Wallpaper

Setup

• Name for recordings

• Image resolution

Pictures

Use flash

The last picture taken is

displayed.

The resolution may decrease

depending on the selected digital

zoom.

Choose between:

Automatic, Off,

Red eye red.

Flash (accessories)

Self timer

The photo is taken approx.

15 seconds after trigger-

ing. For the last 5 seconds,

you will hear a beep each

second.

If the flash is active, this is shown by

a symbol in the display. The flash is

charged constantly while it is con-

nected to the phone and the camera

is activated. This reduces the stand-

by time.

White bal-

ance

Choose between:

Automatic, Indoor,

Outdoor

This symbol appears

when the flash is being

charged.

(For standard functions see p. 17)

For settings, see options menu.

Additional information

Insufficient memory available.

Start the delete assistant to

delete data (p. 83).

A mirror can be attached to the back of the

phone depending on the phone variant.

This makes it easier to take self portraits.

Inbox

When you open an entry,

the relevant application

also starts.

Inbox

The inbox folder offers immediate

access to the messages just received.

This means that you no longer have

to look through all inbox folders for

the various message types. The

After a set period of time, entries

which have already been read and

opened are only displayed in the

message-related inbox lists (see

Setup in the optionsmenu).

entries are marked with a symbol to

indicate their type and status. You

will find a list of the symbols on p. 7.

Inbox options

To call up the inbox folder, e.g. if a

new SMS has been received:

§Options§ Open menu.

Setup

If entries have been

read, remove them from

the Inbox:

Press the soft key beneath

the symbol.

Daily, Never,

Immediately

If Daily has been

selected, specify the

time.

In standby mode:

You will find the following message

types in the inbox folder:

SMS, MMS

(For standard functions see p. 17)

System messages:

Message about MMS, Missed alarm,

Missed appts., Calls missed, WAP push,

Voice message

Data objects

Ringtones, Pictures, Calendar entries,

Notes and Business card

SMS

Confirm. The SMS is trans-

mitted to the service cen-

tre to be sent and saved in

the Sentbox list.

SMS

You can transmit and receive very

long messages (up to 760 charac-

ters) on your phone. They are auto-

matically composed of several "nor-

mal" SMS messages (note higher

charges).

Text options

§Options§ Open menu.

Save

Save composed text in draft

list.

You can also insert simple pictures

and sounds in an SMS.

Picture&

sound

Add pictures, animations and

sounds into message (see fol-

lowing text).

Write/send

C ¢_¢M_SMS¢_texC_treate new

Insert...

Insert Text module, Book-

marks, From 9 (adress-

book/phonebook).

Input text.

Format Font size: Small font,

Medium font, Large font

You will find information

on writing texts with and

without T9 in the chapter

"Text entry" (p. 21).

Underline

Alignment: Default alignm.,

Left, Centre, Right

Mark (highlight text with the

joystick)

The following is displayed

in the top display line:

Text entry status, number

of SMS messages

required, number of char-

acters still available.

Delete

text

Delete the whole text.

Send

with...

Select SMS profile so the SMS

can be sent.

Start sending procedure.

(For standard functions see p. 17)

Select phone number

from the Phonebook/

Addressbook or enter it.

§Group§ If necessary, select

a group.

SMS

For Own animat./Own pictures/

Own sounds:

Picture&sound

Send simple pictures and tones with

or without accompanying text.

The selection is dis-

played/played back.

Remember that these may be pro-

tected (DRM, p. 15).

The selection is added to

the SMS.

With the text input field open:

The pictures which have been added

are displayed. Sounds are displayed

in the form of "wildcards".

§Options§ Open menu.

Select Picture&sound.

SMS to group

You can send an SMS message as a

"circular" to a recipient group.

The menu contains:

Fix animations

Fix sounds

Start transmission proce-

dure.

Own animat.

Own pictures

Own sounds

§Group§

The adressbook is

opened.

<Groups> The list of groups is dis-

Select list.

played.

Confirm. The first entry of

the selected section is dis-

played.

Select group.

Open group and highlight

all/individual entries.

Scroll to entry required.

Transmission is started

after a security prompt.

For Fix animations/Fix sounds:

The selection is added to

the SMS.

SMS

Reply options

Read

§Reply§

Open reply menu.

Arrival of a new SMS

announced in the display.

Open Inbox (p. 44) using

the soft key positioned

beneath it.

Create new

Create a new reply

text.

Edit

Edit received SMS or

add new text.

Reading the SMS.

Answer is YES

Answer is NO

Add Answer is YES to

the SMS.

Scroll through message

line by line.

Add Answer is NO to

the SMS.

ç SMS

Pleasecallback,

Delay, Thank

you

Add a standard text as

a reply to an SMS.

10.05.2004

19:42

+ 12398765431

SMS text . . .

Read options

§Options§ Open options menu.

See "Reply options"

above.

Options

Picture&sound

Text zoom

see also Add contact.

memb.

Search for group member.

Enter welcome text.

Delete group

Delete group.

Invite

Invitation to the contacts

in your own group to Inst.

Message.

Delete

member

Delete contact from the

group member list.

Add group

Add new group.

Search group

Search for group on the

server (no longer in the

"administered groups"

list).

Inst. message

Creating a new contact list

The current contact list is displayed.

§Options§ Open menu.

Contact list options

§Options§ Open menu.

Details =

Additional information

about the contact or the

group.

Contact lists

Available contact lists are

displayed.

My settings

Information on your cur-

rent personal status

(p. 65).

§Options§ Open menu.

Create

Contact list ID:

Give the contact list its

Select.

Manage

Functions for managing

a contact or a group.

own, specific name.

Contact lists

Block list

Display contact lists for

selection.

Name:

Allocate self-explanatory

names.

Display all blocked con-

tacts. Can be unblocked.

Confirm.

Appl. settings

Suspend

Set the application

(p. 65).

Terminate the applica-

tion, the server remains

connected.

Logout

Help

Log off from the server

and return to start menu.

Display help text.

Inst. message

Options (individual contact)

§Options§ Open menu.

Start chat

A contact list must be displayed.

Select a contact or a

group.

Send sound

Select and send a mel-

ody/tone from the list

(DRM p. 15).

Startcommunicationwith

the contact.

Send picture

Select and send a picture

from the list (DRM p. 15).

The page is displayed.

During Inst. Message with

a group, the name of the

sender is placed in front

of each contribution.

Send any =

Send any file.

Details

Information about the

contact (if this is author-

ised by him).

Open editor.

Write text

Clear all

Delete all texts in the cur-

rent Inst. Message.

Block contact

No more messages are

received from the contact

and the contact receives

no status information

from you. This function

works for all your lists.

Send text. The text

appears in the chat soon

afterwards.

Naturally, you can also receive mes-

sages from contacts whom you do

not know. This will be pointed out to

you in the display, and you can

either switch to Inst. Message or

ignore/block the contact.

Inst. message

Options (group contact)

§Options§ Open menu.

Setting

C ¢_¢SM_etup¢_¢In_Ss_et_l._em_ctes_fusa_ng_ce_tion.

Account

The list of available accesses is

displayed.

Leave group

Details

Exit group.

Information about the

group:

Group ID:, Name:, Topic:,

Owner:

Select an access to estab-

lish a connection.

Clear all

Delete all texts in the cur-

rent Inst. Message.

<New entry>/Account sett.

Set up an access or

change the settings as

Receiving objects

You will be informed in the display if

sounds or pictures are sent to you

during a dialogue.

specified by the service

provider. Depending on

the service provider, the

settings may not be

changeable.

§Receive§ Accept object.

§Reject§

Reject object.

Name:

URL:

Name of the access.

Msg. history

Enter URL, e.g.

www.abc.com

C _¢¢M_Msg.¢_hisI_tn_os_rt_y. message

User ID:

Enter a non-ambiguous

user (login) name.

The messages from the last meeting

are displayed. You can read and

delete the contributions.

Password:

Enter password (shown

as a series of asterisks).

Requirement: The server must be

disconnected, see Suspend (p. 62)

and Automatic login: (p. 65).

Inst. message

My settings

Appl. settings

Information on your current per-

sonal status:

Settings for the application used:

Automatic

Auto-reconnect to the

last access to be used.

Alias:

Your own alias by which

you can be found on the

server.

Timeout:

Time without action after

which the application is

terminated. However, the

server remains con-

nected.

AIM screen

name:

Name to be displayed in

the group.

Mood:

Information about your own

mood, e.g.

Messageinfo:/

Online info:

Signal the receipt of mes-

sages: Yes/No

Happy, Sad, Sleepy, etc.

Signal given as:

• Sound

• Silent alert

• Pop-up

Popup windows

authorised: Yes/No

Status text:

Availability:

Random text information,

e.g. "Am at home".

Availability:

Available, Not available,

Discreet

Mobile:

Enter the phone number

with internal extension

code.

§Options§ For each setting, specify

who is allowed to view

your personal informa-

tion:

Public

All contacts.

Private

Contacts designated as

Friend: (p. 60).

Hidden

Nobody.

Voice message/mailbox

C _¢¢M_Voice¢_mM_ese_ss_as_ga_ege setup

Save call divert number

Calls are diverted to this phone

number.

Most service providers provide a

mailbox in which a caller can leave a

voice mail for you

C ¢_¢Dive¢_rt¢Ca_ell_.s_ge_.t_Uu_np_{answered¢Set}

• if your phone is switched off or

not ready to receive,

Enter phone number.

• if you do not want to answer,

Registration with the net-

work is confirmed a few

seconds later.

§OK§

• if you are making a phone call

(and if Call waiting (p. 80) is not

activated).

Listen to message

A new voice message can be

announced as follows, depending on

the service provider:

If the voice mail service is not part of

your service provider's standard

package, you will need to register for

it, and possibly set it manually. The

following sequence may vary from

service provider to service provider.

Symbol plus beep.

Setup

The service provider supplies you

with two phone numbers:

Notification via SMS.

Save mailbox number

You call this phone number to listen

to the voice mails left for you.

You receive a call with an automatic

announcement.

Call your mailbox and play the mes-

sage(s) back.

C _¢¢M_Voice¢_mM_ese_ss_as_ga_ege setup

Press and hold (if neces-

Select number from

Phonebook/Addressbook

or enter/change it.

sary enter mailbox

number once). Confirm

with §OK§ and §Mailbox§

depending on your serv-

ice provider.

§OK§

Confirm.

CB services

C _¢¢_CM_{B se}¢_rviS_ce_et_sup

Topic

Select

§Options§ Open list menu.

Some service providers offer infor-

mation services (info channels, Cell

Broadcast). If reception is activated,

you will receive messages on the

activated topics in your Topic list.

If a topic is selected in the list you

can view it, activate/ deactivate it,

edit it or delete it.

CB languages

Receive Cell Broadcast messages in

one specific language only or in all

languages.

CB messages are displayed in

standby mode; longer messages are

scrolled automatically.

Displays

Receive CB

Ö Õ

Topic activated/deactivated.

You can activate and deactivate the

CB service. If the CB service is acti-

vated, standby time for the phone

will be reduced.

New messages received on

the topic.

Messages already read.

Topic list

You can add any topics to this per-

sonal list from the topic index. You

can preset 10 entries with their

channel numbers (ID) and, if applica-

ble, with their names.

New topic Select.

• If no topic index is available, enter

a topic with its channel number

and confirm with §OK§.

• If the topic index has already been

transmitted, select a topic and

activate it with §Options§.

Surf & fun

Browser menu

§Options§ Open menu.

Surf & fun

Get the latest information from the

Internet that is specifically adapted

to the display options of your phone.

In addition, you can download

games and applications to your

phone. Internet access may require

registration with the service pro-

vider.

Homepage

Call up the pre-set

homepage for the current

profile.

Bookmarks

• List bookmarks

Display list of book-

marks stored in the

phone.

• Bookmark site

The current page is

saved as a bookmark.

Access to the service

provider

Direct call-up of the browser with

the URL from your service provider.

Go to...

Enter URL for direct dial to

an Internet address, e.g.

wap.siemens.com

Reload

Reload current page.

Internet

Show URL

Display the URL of the

page currently loaded for

sending via

C ¢ ¢Internet

The browser is activated with the

pre-set option as soon as you call up

the function (Browser settings,

p. 69; may be specified/pre-assigned

by service provider).

SMS/MMS/e-mail.

History

Display last Internet sites

to be visited.

Disconnect

File

Disconnect the Internet.

Save object on the current

page or save the complete

page; display saved

pages.

Setup

Set or reset browser

(p. 69).

Exit browser

Close the browser.

Surf & fun

End connection

Browser settings

Press and hold to clear

down the connection and

close the browser.

C ¢ ¢Internet

§Options§ Open menu.

Setup

Select.

Navigation in the browser

Browser

Set start option as well as

• Select a link.

handling of pictures and

sounds plus send options.

• Settings, status on/off.

• Press briefly: back a page.

Profiles

The list of profiles is dis-

• One input field/link forward/back.

played for activation/setting.

For more information, con-

tact your service provider.

• Scroll one line.

Protocol

Set protocol parameters,

push messages and abort

time as well as handling of

cookies.

Display symbols in the browser

(selection)

parameters

Connect

No network

Security

Context

Set encryption.

Network

GPRS online

Reset session; delete

cache, history and cookies.

Enter special characters

Your Internet browser is licensed by:

Select important special

characters.

* ^,0

Surf & fun

Profiles

Bookmarks

Preparation of the phone for Internet

access depends on the service pro-

vider concerned:

C ¢ ¢Bookmarks

Display URL/call up page

List bookmarks

Profile pre-set

In most cases, access profiles have

already been created for one or more

service provider(s).

Display list of bookmarks

stored in the phone.

Select bookmark.

Call up URL.

Select profile.

Activate profile.

Save

Set profile manually

If necessary, contact your service

provider.

Bookmark site

The current page is saved

in the phone as a book-

mark.

§Options§ Open menu.

Bookmark options

Edit

Start processing. For the

Internet-specific settings

below, please contact

your service provider.

§Options§ Open menu.

Here you will find functions for

changing and managing bookmarks

and their folders. This includes edit-

ing individual entries with the corre-

sponding URLs as well as deleting

and moving them to other folders.

Delete

Delete selected profile.

Surf & fun

Only description file

Games and Applications

The description file is

loaded for information

Games and applications are offered

on the Internet. Once downloaded

these are available to you on your

phone. Most applications include

instructions. Some applications and

games are already pre-installed on

your phone. You will find these listed

here:

purposes only. The appli-

cation/game itself must

be loaded separately.

or complete download

The application/game is

completely loaded.

www.siemens.com

Apply

Requirements

Browser profile (p. 70) and the

Remember that applications/games

may be protected (DRM, p. 15).

access (p. 85) must be configured.

The executable applica-

tion is saved on the phone

and can be started

immediately.

Download

Select the correct access depending

on whether you are loading games

or applications:

Downl. assist.

C ¢O¢Games

C ¢ ¢Downl. assist.

You will not be left on your own dur-

ing the download!

C ¢O¢Applications

Load or start games and start appli-

cations respectively or load new with

the download assistant.

Surf & fun

Games and applications –

options

Processing and managing your appli-

cations and folders:

Additional information

You can use the browser to download applica-

tions (e.g. ringtones, games, images, animations)

from the Internet.

Siemens excludes all warranty and liability claims

in respect of or in connection with any applica-

tions subsequently installed by the customer and

any software not included in the original delivery

package. This also applies to functions enabled

subsequently at the customer's instigation. The

purchaser bears sole risk for the loss of, damage

to, and any defects arising in, this device or the

applications and for any direct damage or conse-

quential damage of whatever nature resulting

from the use of this application.

For technical reasons, such applications and sub-

sequent enabling of certain functions are lost in

the event of the device being replaced/re-sup-

plied and may be lost if it is repaired. In such

cases, the buyer is required to download or

release the application again. Please ensure that

your phone has Digital Rights Management

(DRM) so that downloaded applications are pro-

tected from unauthorised reproduction. These

applications are then exclusively intended for

your phone and cannot be transferred from this

even to create a backup.

Move

Move applications between

folders.

New folder

Update

Create and name new folder.

Reinstall an application

(update).

Security

Reinstall

Select a safety level.

Repeat after transmission

error.

Attributes

Show details of the applica-

tion/folder (name, version,

size, path, producer, date).

HTTP

profile

Display profile list for

activation/setting

(For standard functions see p. 17)

Siemens does not warrant, guarantee or accept

any liability for the customer's ability to download

or enable applications again or to do so free of

charge. It is recommended from time to time to

back up applications on the PC using the "Mobile

Phone Manager" (www.siemens.com/c70)

Setup

Profile settings

Edit a default profile or create a new

personal profile:

Profiles

C ¢T¢Profiles

Several settings can be stored in a

phone profile in order, for example,

to adapt the phone to the surround-

ing level of noise.

Select profile.

§Options§ Open menu.

Change sett.

• Five standard profiles are provided

with default settings. They can be

changed however:

Select.

The list of available functions is dis-

played.

Normal environment

Quiet environment

Noisy environment

Car Kit

When you have finished setting a

function, you return to the profile

menu where you can change a fur-

ther setting.

Headset

Additional information

• You can set two personal profiles

• Call up the list in standby mode:

(<Name>).

Profile list is displayed.

• The special profile Aircraft mode is

fixed and cannot be changed.

• The active profile is identified with ·.

Switch on

Select default profile or

personal profile.

Switch on profile.

Setup

Profile options

Aircraft mode

§Options§ Open menu.

The acoustic signals and vibration

for the alarms (appointments, alarm

clock) are switched off. The alarms

continue to be shown in the display

only.

Activate

Activate selected profile.

Change profile settings.

Change sett.

Copy from

Copy settings from

another profile.

Switch on

Scroll to Aircraft mode.

Rename

Change personal profile

(except default profiles).

Confirm selection.

Confirm safety prompt

again to activate the pro-

file. The phone switches

itself off automatically.

Car Kit

If an original Siemens Car Kit is used,

the profile is switched on automati-

cally when the phone is inserted into

the cradle (also see accessories).

Normal mode

When you switch on your phone

again, the previously set profile will

be reactivated automatically.

Headset

The profile is only switched on auto-

matically if an original Siemens

headset is used (see accessories

also).

Setup

Themes

C ¢T¢Themes

Load a completely new visual

presentation onto your phone. At

the press of a key, various functions

are re-organised on a theme basis,

e. g.

switch on/off animation, back-

ground image, screensaver, switch

on/off melody, additional anima-

tions.

theme files are compressed to save

memory space. After being down-

loaded or called up from My stuff,

these are automatically unzipped

when activated.

Activate new theme

Select theme.

Display theme preview.

Activate new theme.

Setup

Wallpaper

Set wallpaper graphic for the display.

Display

C _¢¢_ST_ele¢_ctD_fi_us_npl_ca_ty_ion.

Logo

Choose graphic to be displayed

instead of the provider logo.

Language

Set the language for the display text.

When "automatic" is set, the lan-

guage of your home service provider

is used.

Colour skin

Select colour scheme, incl. back-

ground image for the entire user

interface

If a language that you do not under-

stand happens to be set, the phone

can be reset to the language of your

home service provider with the fol-

lowing input (in standby mode):

Screensaver

The screensaver shows a picture in

the display when a period set by you

has elapsed. An incoming call and/or

pressing any key will end the func-

tion except if the safety function is

activated.

_{# 0 0 0 0 #}A

Text input

T9 preferred

Activate/deactivate intelligent text

entry.

Change settings:

§Change§ Settings are shown:

Input language

Preview

Display the screensaver.

Select language for text entry.

Languages with T9 support are

marked with the T9 symbol.

Style:

Select Analogue clock, Digital clock,

Bitmap, Energy saving.

Picture:

Select image in My stuff.

Setup

Timeout:

Own greeting

Set period after which the screen-

saver starts.

Enter greeting to be displayed

instead of animation when phone is

switched on.

Code protection:

The phone code is requested to stop

the screensaver.

Big letters

You can choose between two font

sizes for the display.

Auto key lock:

Automatic keypad locking if no key

has been pressed for one minute in

standby mode.

Illumination

Set display illumination to

brighter/darker. The darker the set-

ting the longer the standby time.

Unlocking:

Press and hold.

Note

Press the joystick repeat-

edly at the top/bottom to

adjust up or down.

The "picture" (animated) and

"digital clock" screensavers significantly

reduce the phone’s standby time.

Contrast

Set display contrast.

Start up anim.

Press the joystick repeat-

edly at the top/bottom to

adjust up or down.

Select animation to be shown when

the phone is switched on.

Shutdn anim.

Select animation to be shown when

phone is switched off.

Setup

Volume

Set different volumes for types of

call/functions.

Ringtones

C _¢¢_ST_ele¢_ctR_fi_un_ngt_co_tn_ioe_ns_.

Select

Set the signal tones on the phone to

suit your requirements.

Incoming call

Walky Talky

Messages

Alarm clock

Organiser

Ringer setting

On/off

Activate/deactivate all

tones.

Beep

Reduce ringtone to a

short signal (beep).

System

Applications

Silent alert

The ringtone is repeated.

To avoid the disturbance caused by a

ringing phone, you can activate the

silent alert function as an alterna-

tive. The silent alert can also be acti-

vated in addition to the ringtone

(e.g. in noisy environments). This

function is deactivated when the

battery is being loaded and accesso-

ries are connected (except the head-

set).

Set volume.

Confirm setting.

Additional information

Please make sure you have accepted the

call before holding the phone to your ear.

This will avoid damage to your hearing from

loud ringtones.

Settings are displayed for

changing.

Select from several silent

alert versions.

Confirm setting.

Setup

Assign ringtone

A ringtone which has already been

selected will be played or the list of

possible ringtones will be displayed

for selection.

d Calls

Assign a single ringtone to all phone

numbers in the Addressbook.

Group calls

Assign a different ringtone to each

group.

Other calls

Assign one ringtone to the remain-

ing callers.

Walky Talky

Assign a ringtone to a Walky Talky

connection.

More melodies

Assign further ringtones for:

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

or record new ones with:

Sound recorder (p. 108)

Setup

Condition set.

Not set.

Call setup

C _¢¢_ST_ele¢_ctC_fa_ul_nl s_ce_tt_ioup_n.

Display if status is

unknown (e.g. with a new

SIM card).

Hide ID

Clear all

When you make a call, your phone

number can be displayed on the

recipient's display (depending on the

service providers).

All set diversions are cleared.

Set up call divert (example):

The most common condition for call

divert is, for example:

To suppress this display, you can

enable the "Hide ID" mode for all sub-

sequent calls or just for the next call.

You may need to register separately

with your service provider for these

functions.

Unanswered

Select Unanswered.

(Includes the conditions

Not reachable, No reply,

Busy, see below)

Call waiting

If you are registered for this service,

you can check whether it is set and

you can activate/deactivate it.

Set

Confirm.

Select.

Confirm.

Divert

Select or enter the phone

number to which the calls

are to be diverted.

You can specify the conditions under

which calls should be diverted to

your mailbox or other numbers.

§Mailbox§ Use existing mail-

box phone numbers, or

enter them if necessary.

Status check

You can check the current divert sta-

tus for all conditions. After a short

pause, the current situation is trans-

mitted by the network and dis-

played.

§OK§

Confirm. After a short

pause, the setting is con-

firmed by the network.

Setup

All calls

All calls are diverted.

Call screening

Only calls from phone numbers that

are in the Phonebook/Addressbook

or assigned to a group are signalled.

Other calls are only displayed.

Icon in the top line of the

display in standby mode.

Not reachable

Divert occurs if the phone is

switched off or is out of range.

Any key answ.

Incoming calls can be accepted by

pressing any key

No reply

A call is only diverted after a delay

that is determined by the network.

The period can be set to a maximum

of 30 seconds in 5 second intervals.

(except for B).

Minute beep

During a call you have initiated you,

and only you, will hear a beep

every minute so you can check the

call’s duration. The recipient does

not hear this beep.

Busy

Divert occurs if a call is in progress. If

Call waiting is activated (p. 26) you

will hear the call waiting tone during

a call (p. 28).

Receiving data

Data calls are diverted to a phone

number with a PC connection.

Additional information

Note that the divert is stored in the network

and not in the phone (e.g., when the

SIM card is changed).

Reactivate divert

The last divert has been stored. Proceed as

with "Set divert". The stored phone number

is displayed. Confirm number.

Setup

Deactivate:

Phone setup

C _¢¢T_Sele¢_ctP_fh_uo_nn_ce_tis_oe_ntu_.p

§Manual§ Press.

§OK§

Confirm.

Key tones

Set the type of acoustic key

acknowledgement.

Phone identity

The phone identity number (IMEI) is

displayed. This information may be

useful for customer service.

Info tones

Set service and alarm tones:

Alternatively enter in standby mode:

# 0 6 #

On/off

Activate/deactivate tones.

§Info§

Display further informa-

tion about the appliance.

Extended If switched on, a wider

range of service tones is

available, e.g.: end of

Device check

A self-test and an individual test are

offered after the last information

page. If you select Selftest, all individ-

ual tests are carried out.

menu reached, network

connection interrupted.

Auto off

The phone switches off each day at

the set time.

Software version

Display the software version for your phone

in standby mode:

Activate:

# 0 6 #, then press §More§.

§Time§

Press.

Enter time

(24-hour clock).

§OK§

Confirm.

Setup

Memory assis.

The delete assistant will help you if

there is insufficient phone memory.

It is also started automatically from

applications if necessary.

After capacity has been checked, all

files and folders are displayed along

with their size and may be opened/

viewed and deleted if applicable.

File system

Format

(Phone-code protected)

The phone memory is formatted and

all saved data such as ringtones, pic-

tures, games etc. are deleted. For-

matting may take longer than 1

minute.

Clean up

Creating more memory by deleting

temporary files that are no longer

required.

Master reset

Reset phone to default values (fac-

tory setting). This does not affect the

SIM card or the network settings.

Alternatively enter in standby mode:

# 9 9 9 9 #

Setup

Open menu.

§Options§

Set

Clock

C _¢¢_ST_ele¢_ctC_fl_uo_nck_ction.

Time/date

The clock must be set correctly once

at start-up.

Set time zone.

Auto time

Have the time zone set auto-

matically by the network.

zone

Search city

Help

Search for a city.

Operating instructions.

§Change§ Press.

Date format

Select the display format for the

date.

First enter the date

(day/month/year), then

the time

(hours/minutes/seconds).

Time format

Select 24h or 12h.

Additional information

If the battery is removed for longer than

30 seconds, the clock must be reset.

Buddhist year

Switch to the Buddhist year (not on

all phone models).

Time zones

The time zone can be selected in the

world map or a city list:

Show clock

World map

Activate/deactivate time display in

standby mode.

Select the desired record-

ing.

Auto time

City list

The time is set automatically via the

GSM network.

Select a city in the

selected time zone.

Setup

IrDA

Connectivity

Your phone has an infrared inter-

face. With this interface, you can

exchange data such as pictures, ring-

tones, Addressbook entries, busi-

ness cards or organiser data with

other devices which also have an

infrared interface.

C _¢¢_ST_ele¢_ctC_fo_un_nn_ce_tc_ioti_nvi_.ty

GPRS

(General Packet Radio Service)

Switch GPRS on/off

The infrared interface is on the left

side of the phone. The distance

between the two devices must not

exceed 30 cm. The infrared windows

in both appliances must be aligned

as accurately as possible with each

other.

GPRS is a method for transmitting

data faster in the mobile network.

Use GPRS and, if the network has suf-

ficient capacity, you can be con-

nected to the Internet permanently.

Only the actual transmission time is

charged by the network operator.

Some service providers do not yet

support this service.

Shown on the display:

IrDA activated.

Shown in the display:

During transmission.

Activated and available.

Data services

Basic setting and activation of the

connection profiles for data trans-

mission such as MMS, WAP.

Registered.

Temporarily interrupted.

GPRS info

Displays information on connection

status.

The phone default setting varies

from service provider to service pro-

vider.

• The settings have already been

implemented by the provider. You

can start immediately.

Setup

• Access profiles have already been

created by your provider. Then

select profile and activate.

HTTP profile

The phone default setting varies

from service provider to service pro-

vider.

• The access profiles must be con-

figured manually.

• The settings have already been

implemented by the provider. You

can start immediately.

If necessary, check with your service

provider for details. You will also find

the current settings for the service

provider on the Internet at this

address:

www.siemens.com/

mobilephonescustomercare in the FAQ

section.

• Access profiles have already been

created by your provider. Then

select and activate profile.

• The access profiles must be con-

figured manually.

If necessary, check with your service

provider for details. You will also find

the current settings for the service

provider on the Internet at this

address:

www.siemens.com/

mobilephonescustomercare in the FAQ

section.

Select profile.

Select the profile.

Confirm selection.

Set profile

Select the profile.

§Options§

Open menu.

Make the settings.

§Edit§

Open the selection.

Authentication

Select CSD settings, and/or

GPRS settings.

Activate or deactivate encrypted

Internet dial-up (CSD connections

only).

§Edit§

Make the settings as

specified by your service

provider.

Setup

Only ‚

(PIN2 or phone-code protected)

Security

C ¢_¢ST_ele¢_ctS_fe_uc_nu_cri_tt_iy_on.

Dialling options are restricted to

SIM-protected phone numbers in the

Phonebook. If only area codes are

entered, relevant phone numbers

can be added to these manually

before dialling.

Auto key lock

The keypad is locked automatically if

no key has been pressed for one

minute in standby mode. This pre-

vents the phone from being used

accidentally. However, you can still

be called and you can still make an

emergency call.

If the SIM card does not support PIN 2

input, the whole Phonebook can be

protected with the phone code.

This SIM only

(Phone-code protected)

Additional information

The keypad can also be directly locked and

unlocked in idle state.

The phone can be connected to a

SIM card when the phone code is

entered. Unless the phone code is

known the phone will not operate

with a different SIM card.

In each case:

Press and hold.

Direct call

(Phone-code protected)

If the phone is to be used with a dif-

ferent SIM card, enter the phone

code when requested.

Only one phone number can be

dialled (see also p. 30).

PIN codes

For description see p. 19:

PIN control, Change PIN, Change PIN2,

Chg.phonecode

Setup

When roaming

Barrings

Barring restricts the use of your

You do not receive calls when you

are outside your home network. This

means that no charges are incurred

for incoming calls.

SIM card (not supported by all serv-

ice providers). You need a 4-digit

network password for network bar-

ring. Your service provider will give

you this password. You may need to

be registered separately for each

barring.

Status check

The following information can be

displayed after a status check:

Barring set.

All outgoing

All outgoing calls except emergency

numbers are barred.

Barring not set.

Status unknown

(e. g. new SIM card).

Outgoing intl.

(International outgoing)

Only national calls can be made.

Clear all

All barrings are deleted. A password

which the service provider will give

you is necessary for this function.

Out.int.x.home

(International outgoing without

home country)

International calls are not permitted.

However you can make calls to your

home country when abroad.

All incoming

The phone is barred for all incoming

calls (forwarding all calls to mailbox

provides a similar effect).

Setup

Network info

The list of GSM networks currently

available is displayed.

Network

C _¢¢_ST_ele¢_ctN_fe_ut_nw_co_tr_ik_on.

Indicates non-authorised

service providers

(depending on SIM card).

Line

This function is only displayed if it is

supported by the service provider.

Two separate phone numbers must be

registered on the phone.

Choose netwrk

Network search is restarted. This is

useful if you are not on your home

network or want to register on a dif-

ferent network. The network list is

rebuilt when Auto network is set.

Select line

Select the currently used phone

number.

Display current phone

number in standby mode.

Auto network

Activate/deactivate, see also Choose

netwrk above. If "Automatic network"

is activated, the next network on the

list is dialled in ranking order of your

"preferred networks". Otherwise a

different network can be selected

manually from the list of the availa-

ble GSM networks.

Protected

(Phone-code protected)

You may limit usage to one phone

number.

Additional information

Special settings may be made for each

phone number (e.g., melody, call divert etc.)

To do this, first switch to the required phone

number.

Pref. network

Enter your preferred service provid-

ers here for when you leave your

home network (e.g. if there are dif-

ferences in price).

Switch from phone number / connection in

standby mode:

Press.

§Line 1§

Press.

Setup

Your service provider is displayed:

User group

§List§

Display list of preferred

networks.

Depending on the service provider,

you can create groups with this serv-

ice. These can have access to inter-

nal (company) information, for

example, or special tariffs apply. The

details can be clarified with your

service provider.

Create/change entry:

<Empty> or select an existing entry,

then select a new service

provider in the list and

confirm.

Active

Record new service provider (last

entry in the list):

Activate/deactivate function. "User

group" must be deactivated for nor-

mal phone use.

Furth.network

Select, enter the provider data and

save it.

Select group

You can select or add groups other

than preferred groups (see below).

Code numbers for the groups are

obtained from your service provider.

Additional information

If you are outside your home network, your

phone automatically dials another GSM

network.

All outgoing

If the signal strength of the preferred net-

work is inadequate when you switch on the

phone, the phone may register in a different

network. This can change when the tele-

phone is next switched on or if another net-

work is selected manually.

In addition to network control for a

user group, it is possible to set

whether outgoing calls outside the

group are permitted. If the function

is deactivated, only calls within the

group are permitted.

Band selection

Select either GSM 900, GSM 1800 or

GSM 1900.

Pref. group

If activated, calls may only be made

within this standard user group

(depending on the network configu-

ration).

Fast search

When this function is active, net-

work reconnection is speeded up

(standby time is reduced).

Setup

Automatic settings:

Accessories

C _¢¢_ST_ele¢_ctA_fc_uc_ne_cs_ts_io_or_nie_.s

• Permanent illumination:

switched on.

• Key lock: switched off.

• Charging the phone battery.

Car Kit

• Auto. activation of car kit profile

when the phone is inserted.

Only in combination with an original

Siemens handsfree car kit (see

accessories). The car kit profile is

activated automatically when the

phone is inserted into the cradle.

Headset

Only in conjunction with an original

Siemens headset (see accessories). If

an original Siemens headset is used

the profile is activated automatically

when the headset is plugged in.

Auto answer

(factory default: off)

Calls are accepted automatically

after a few seconds. Eavesdropping

is possible!

Auto answer

(factory default: off)

Shown on the display.

Calls are accepted automatically

after a few seconds (except where

the ringer is switched off or set to

beep). You should therefore be

wearing the headset.

Automatic switch off

(factory default: 2 hours)

The phone is powered by the car's

power supply. You can adjust the

time between switching off the igni-

tion and the phone switching off

automatically.

Automatic setting

Accept call with Call key or PTT key

(Push To Talk), even when the auto

key lock is activated.

Car loudspk.

Improves playback in certain circum-

stances.

Auto answer

If you do not notice that your phone has

accepted a call, there is the danger that the

caller may eavesdrop.

My menu

Change menu

My menu

You can replace each entry (1-10)

with another entry from the selec-

tion list.

Press.

§My menu§ Press.

Select the required entry.

Create your own menu

with frequently used functions,

phone numbers or Browser pages.

The function list is opened

for selection.

§Change§

The list of 10 entries is preset. You

can, however, change it as you wish.

Select the new entry from

the list.

Confirm. The entry is

saved.

Use

Select the required entry.

If Phonebook is selected,

the phone number must

also be selected; if Internet

is selected, the bookmark

must also be selected.

Confirm.

If the entry selected is a

phone number, you can

also call it with the Call

key.

Reset all

(Telephone code required)

Select. Following confir-

§Reset all§

mation, the pre-assign-

ment is reset.

Fast access

Soft keys

Fast access

You can assign one important phone

number or a function to each one of

the two soft keys and number keys

2 to 9 (speed-dial numbers). The

phone number can then be dialled or

the function started at the touch of a

button.

Change

For example, the Internet function is

assigned to the soft key. To change

this (in standby mode):

§Internet§ Press briefly.

§Change§ Scroll to new assignment

in the list.

Confirm.

• Special case Phone number. Pick

out a name from the Phone-

book/Addressbook for assignment

to the key.

Service provider

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

01.03.2004

Internet

10:10

Help

Apply

Additional information

In standby mode:

The service provider may have already

assigned functions to a soft key (e.g.,

access to "SIM services" or direct call-up of

the Internet portal). It may not be possible

to modify this key assignment.

Application:

The "Internet" is just used as an

example here.

§Internet§ Press and hold; the appli-

The left soft key may sometimes be

replaced automatically by p / À to

access a new message, for example.

cation is started.

Phone number:

The setting "Carol" is used here only

as an example.

§Carol§

Press and hold, the phone

number is dialled.

Fast access

Scroll to application in the

list.

§Change§

Speed dialling keys

Number keys 2 to 9 can be used as

speed dialling numbers for fast

access. Number key 1 is reserved for

the mailbox phone number (p. 66)

and number key 0 is reserved for

switching over two connections dur-

ing use(p. 89).

Confirm.

• Special case Phone number. Pick

out a name from the Phone-

book/Addressbook for assignment

to the key.

• Special case Bookmark. Scroll to a

URL in the bookmark list for

assignment to the key.

Change

In standby mode:

Press number key briefly

(e.g. the 3).

Apply

Select a stored phone number or

start a stored application

(e.g. Internet).

This number is still free:

§Set§

Press.

Select a new function

from the list and confirm

with §OK§.

In standby mode:

Press briefly.

An assignment has

already been made to this

key (assignment dis-

played above the right

soft key):

The assignment of the number key 3

is displayed above the right soft key

e.g.:

§Internet§ Press and hold.

Or simply

Press briefly.

Press and hold.

Organiser

Daily view

Special displays:

Calendar

C ¢Q¢Calendar

Description of appointment.

Navigation:

You can enter appointments in the

calendar. Time and date must be set

for the calendar to work correctly.

One day forward/back.

The calendar offers you three views:

To the start/end of the day

or next/last entry.

Monthly view

Special colour coding:

Calendar setup

Day with entries for appointments,

day of the week, weekend.

C ¢Q¢Calendar setup

Start of day:

Navigation:

Time when the working day begins.

One day forward/back.

Start of week:

Weekday on which the monthly and

weekly view on the left starts.

One week forward/back.

Open daily view.

Set weekend

Set the days for the weekend.

Weekly view

Special displays:

Show birthdays:

Appointments are shown as a hori-

zontal colour bar on the vertical hour

division.

Navigation:

One day forward/back.

Forward/backward by the

hour through the day.

Organiser

Different input/selection fields are

displayed depending on the type.

The number of fields can be

restricted, see Standard at the end of

the list.

Appointments

C ¢Q¢Appointments

Appointments are displayed in

chronological order in a list.

Description:

Description of appointment.

Enter new appointment

Phone number:

Enter a phone number or select one

from the address directory.

Select.

Category:

Memo

Voice memo:

Enter a voice recording, see Dic-

Text input for description.

tat.machine, p. 99.

Voice memo

Location:

Enter voice memo.

Shown with alarm.

Location of appointment.

Call

Whole day:

All-day appointment: Yes/No

Enter phone number to

be displayed with the

alarm.

Start date:

Date when appointment starts.

Meeting

Start time:

Time when appointment starts.

Text input for description.

Holiday

End date:

Date when appointment ends.

Enter start and end date.

Birthday

End time:

Time when appointment ends.

Enter name and date.

Organiser

Alarm time:

Information on the alarm

When the set date and time are

On/off or Silent alert.

reached there is an audio and a vis-

ual alarm. If an alarm is missed it

appears in the list of missed appoint-

ments (p. 98).

Enter the period of time

before the appointment

and select the time unit:

Minutes, Hours, Days.

Alarm type Memo

Reoccurrence:

Select a timeframe for repeating the

appointment:

Meeting: The text is shown in the dis-

play.

Alarm type Call: The phone number

is displayed and can be dialled

immediately.

No, Daily, Weekly, Monthly, Yearly.

Enter a parameter for repeating:

Forever, Until, Occurrences (number).

Alarm type Birthday: You can send

special birthday greetings by SMS,

MMS or a call via §Options§.

If Weekly is selected, certain week-

days can be highlighted.

With Snooze you can set the alarm to

repeat.

All fields/Reduced fields

In the list, select those fields which

are to be offered for future entries.

Additional information

Display above set alarms:

Alarm clock

Appointment

An alarm sounds even when the phone is

switched off (except in Aircraft mode,

p. 74). The phone does not go to standby

mode. Pressing any key will lead to

Snooze (see below).

Organiser

Tasks

Notes

C ¢Q¢Tasks

C ¢Q¢Notes

A task is displayed like an appoint-

ment in the agenda of the selected

day. However, unlike an appoint-

ment it does not require a time.

When no time is entered the task

appears at the top of the list every

day until it is marked as completed.

Write and administer brief text

memos.

Enter a new memo

Select.

Input text. The first line is

displayed as a "title" in the

memo list. Total length:

max. 160 characters.

The entries are made in the same

way as Appointments (see "Appoint-

ments"). Then press

Status:

§Options§ Open menu.

Select Done or Outstanding.

Save

Save memo. When Confi-

dential is selected, a memo

is protected with the

phone code.

Priority:

Selection in 5 levels from Lowest to

Highest.

Date in use:

If activated with Yes, the following

time-input option is offered.

Missed appts.

C ¢Q¢Missed appts.

Due date:/Due time:

Enter the date and time by which the

task is to be completed.

Events with an alarm (Appointments,

Tasks) to which you have not reacted

are listed for reading.

Alarm: and Standard as for Appoint-

ments.

Organiser

Organiser options

Depending on the application used

(Calendar, Appointments, Tasks, Notes)

and the current situation, different

functions are offered.

Dictat.machine

C ¢Q¢Dictat.machine

Use the dictating machine to record

short voice memos.

• Use your phone as a dictating

machine when on the move.

§Options§ Open menu.

Delete

Delete entry.

• Record a memo as a reminder or

as a note for others.

Delete until

Delete all entries prior to a

certain date.

• Add a voice memo to an appoint-

ment in the calendar.

Delete all

Delete all entries after

confirmation.

• Record a call - useful for remem-

bering numbers or addresses.

Delete done

Delete all completed tasks.

Switch alarm on/off.

Warning!

Activate/

Deactivate

The use of this feature may be subject to

restrictions under criminal law.

Please inform the other party to the conver-

sation in advance if you want to record the

conversation and please keep such record-

ings confidential.

Filter

Display all entries with the

selected feature.

Confidential

Protect note with phone

code. We recommend that

you do not store any pass-

words (PIN, TAN etc.) as

notes.

You may only use this feature if the other

party to the conversation agrees.

(For standard functions see p. 17)

100

Organiser

New recording

Dictating machine options

§Options§ Open menu.

Select.

Handsfree

Playback through the

built-in loudspeaker.

The remaining time avail-

able, as well as the record-

ing time, are shown in the

display.

(For standard functions, see p. 17)

A brief tone sounds when

the recording starts. Now

say the text.

Time zones

C ¢Q¢Time zones

The time zone can be selected in the

world map or a city list:

Alternate between

pause/record.

World map

End recording.

Select the desired

recording.

The recording is automat-

ically saved with a time

stamp. Rename with

§Options§.

City list

Select a city in the

selected time zone.

Playback

Select the desired

recording.

Time zone options

§Options§

Open menu.

Alternate between

playback/pause.

Set

Specify the time zone.

Press and hold for rapid

rewind and fast forward.

Auto time

The time zone is switched

automatically to local time

by the network.

zone

Search city

Help

Search for a city.

Operating instructions.

Extras

101

Extras

Preparing a session

Walky Talky

This application can be used to

simultaneously connect multiple

subscribers. Like a normal Walky

C ¢ ¢Walky Talky

Select.

Talky, only one subscriber can speak

at a time. The others can only listen

until the speaker allows others to

talk. Please note that additional

costs may be incurred as a result of

using this application. Your service

provider can provide further

information.

The possible functions as well as

already added subscribers are

displayed.

You have several options to combine

the subscribers:

A recipient is selected using their

Walky Talky address (WT ID) or their

phone number. Groups created in

advance (p. 104) can be invited to

a session. Your service provider will

supply you with your own WT

address.

Search and mark recipient

in Addressbook.

Add recipient.

The recipient can also use a mobile

phone, as well as a PC with an

Internet connection and headset

(depending on service provider).

Select a subscriber from

an earlier session.

To use the application, GPRS (p. 85)

must be switched on and Walky Talky

(p. 105) activated.

Enter WT ID of a recipient.

Add entries.

§Select

102

Extras

Additional information

Depending on the setting for Hold mode

(p. 106)

must be pressed and held as

Select group.

long as one speaks.

If the person with speaking rights takes

a long pause, the speaking rights are

automatically released again.

Open

Select and mark recipient.

Add recipient.

§Select

Inviting additional subscribers

You can invite additional subscribers

during a session.

Starting a session

If all the desired subscribers are

combined, start the session:

§Options§ Open menu, select Invite

and mark new subscribers.

The subscribers are dis-

played, and the author-

ised speaker is shown in

bold.

You are being invited

The invitation is shown in a window.

You can accept or refuse this

invitation.

Speaking rights

The list of subscribers is displayed.

The current authorised speaker is

shown in bold.

Accept the invitation.

The list of subscribers is displayed.

Request speaking rights.

Leaving the session and ending

Only if you yourself started the

session.

The delegation of speak-

ing rights is displayed and

then the requester can

talk.

§Options§ Open menu.

Quit session

Returning speaking

rights.

Select. You will leave and

end the current session.

Extras

103

Letting the session run in the

background

Clear

Delete the list except for

the last entry.

The current session remains active in

the background. A phone call ends

the session.

Handsfree

Switch on handsfree

talking (loudspeaker).

Request

pres.

Request information

about the readiness to

receive for a subscriber.

Putting Walky Talky in the background

Press and hold.

Volume

Set volume. I is also

possible.

Using Walky Talky again

(For standard functions see p. 17)

C¢ ¢Walky Talky

Sessions Continue session again.

Sessions

C ¢ ¢Walky Talky¢Sessions

Walky Talky options

§Options§ Open menu.

Display subscriber list for the current

session. The authorised speaker is

shown in bold.

Different functions are offered

depending on the situation.

History view

Session view

Quit session

Display of subscribers in

order of speaking.

Display of subscribers for

the current session.

End session.

Session

details

Start time, Status,

Duration, Type etc.

User details

Display subscriber

properties (see also

My presence, p. 105).

Add to d

Save WT ID in

Addressbook.

Invite user

Add to group

Invite a subscriber to

a session.

Add subscriber to the

group.

104

Extras

Membership:

Set if membership in this

Records

C¢ ¢Walky Talky¢Records

group is open to everyone

(Open) or if the subscriber

is limited to the member

list (Restricted).

Select the list of received and made

Walky Talky calls as well as the

option to delete all lists.

Memberlist Add member to the

You can mark subscribers for one

session in the list.

group.

Rejectlist List of subscribers which

may not become mem-

bers of this group.

Start session.

The function Create as group in

§Options§ can be used to combine

entries in the list into a new group.

§Save§

Save group.

List of subscribers with whom

a session is not desired. Invitations

from this list are always refused

automatically.

Groups

C¢ ¢Walky Talky¢Groups

Only your groups are displayed and

can be edited.

List of subscribers whose invitation is

automatically accepted (see also

Auto answer p. 105).

Setting up a new group

Select.

Starting a session (group conversation)

Fill in input fields:

Select group.

Walky Talky ID:

Start session.

Subscriber ID.

Name:

Group name.

Type

Instant or Chat.

Max. users:

Maximum number of

group members ("0"

means "no limit").

Extras

105

Viewing group properties

Settings

Select group.

C¢ ¢Walky Talky

¢Settings

View properties.

Some settings must be made by the

user or can be copied from your

service provider.

§Options§ Open menu.

Add to d

Copy group ID to the

Addressbook.

Select and confirm the

function, area.

Edit

Edit (your own) group.

Dwnl. settings

Download settings from the server

of the service provider.

Copy ID to clip

Save group ID (WT ID)

in the clipboard.

Memberlist

Rejectlist

Display the member list.

WT online

Display the refused

subscribers.

Block WT calls

Allow/block Walky Talky calls.

My presence

C _¢¢_Pres¢_enW_cea_¢lky_MT_yal_pk_ry_esence

Auto answer

Automatically accept invitations

because of the Acceptlist (p. 104).

The following properties (yours) can

be set:

Use Acc.& Rej.

Activate/deactivate the use of

Acceptlist/Rejectlist p. 104/p. 104).

Interruption

Allow, forbid interruption

Mood

Notes

Display your mood.

Note.

Walky Talky

• WT enabled

Activate/deactivate Walky Talky.

• History length:

Number of entries in the list.

• Timeout(min.):

Walky Talky is put in the

background if not used after an

adjustable amount of time.

106

Extras

• Hold mode

_{Depending on the setting,}A

must be pressed and held to

speak.

• Default view

Session view or History view.

• Request pres.

The saved properties are

displayed.

Server

Settings for the server. Please check

with your service provider.

Advanced

Further settings. Please check with

your service provider.

Additional information

If an accessory such as the car kit is

connected, its PTT key also functions as

a WT-key.

Extras

107

SIM services (optional)

Set alarm call time

(hh:mm).

C ¢ ¢SIM services

Switch to the week days.

Your service provider may offer spe-

cial applications such as mobile

banking, share prices, etc. via the

SIM card.

Navigate to the various

days.

Display options: alarm call

time and days.

If you have such a SIM card, the SIM

services will appear in the main

menu under "Extras" or directly

above the soft key (on the left).

Alarm clock

Symbol for SIM services.

Where there are several applications,

these are displayed in a SIM services

menu. With the SIM services menu,

your phone is ready to support

future additions in your service pro-

vider's user package. For further

information, please contact your

service provider.

07:30

Mo Tu We Th Fr Sa Su

Edit

Set days for alarm calls.

Press again to delete the

highlighting.

Alarm clock

Press and hold to high-

light/unhighlight all the

days.

C ¢ ¢Alarm clock

The alarm will ring at the time set by

you, even when the phone is

switched off.

§OK§

Confirm setting.

Additional information

Screen display in standby

mode: alarm clock activated.

§Edit§

Press to set.

Activate/deactivate the

alarm.

With Snooze you can set the alarm to

repeat.

Switch to time setting.

108

Extras

Playback

Sound recorder

Select the desired

recording.

C ¢ ¢Sound recorder

D E

Use the Sound recorder to record

noises or sounds for use as ring-

tones. The Sound recorder is usually

started from other applications/func-

tions such as assigning a ringtone.

Alternate between

playback/pause.

Press and hold for rapid

rewind and fast forward.

§Options§ Open menu.

New recording

Handsfree

Playback via the built-in

loudspeaker.

Start from main menu:

C ¢ ¢Sound recorder

Set as...

Set the recording as a

ringtone.

(For standard functions see p. 17)

Select.

The remaining time avail-

able, as well as the record-

ing time, are shown in the

display.

Start it from another application as

follows:

The recording display appears:

A brief tone sounds when

the recording starts.

Alternate between

pause/record.

End recording.

The recording is saved

with a timestamp in the

Sounds folder. Rename

with §Options§.

§Insert§

Transfer the recording

into the application.

Extras

109

Calculator options

§Options§ Open menu.

Calc.

C ¢ ¢Calc.

Convert

Call up the unit con-

verter with the current

result.

The calculator can be used in a basic

version and with an advanced range

of functions. The input line and two

calculation lines (including the

matrix with the calculation func-

tions) are located in the top half of

the display.

Clear all

Delete all units.

Extended mode/

Basic mode

Convert calculation

functions.

(For standard functions see p. 17)

Enter digit(s).

Navigate functions.

Unit converter

Use function. The result is

calculated and displayed

immediately.

C ¢ ¢Unit converter

You can convert various measure-

ment units into other measurement

units.

Basic mode:

+, -, *, /

Basic calculation types

Result

The following types are offered with

various units:

1/x

Reversion

Velocity

Energy

Mass

Convert to percentage

Decimal point.

Sign change "+"/"-"

Pressure

Time

§Options§ Extended mode:

Square root

Square

Volume

Area

Exponent

Length

Power

M+

Save displayed number

Call up saved number

Insert number from memory

Temperature

Currency

110

Extras

Example using Velocity units:

§Save§

Store entry.

Now enter the name and exchange

rate of the currency to be converted.

Type

Units

Velocity

Kilometres/h, Metres/sec,

Miles/h, Miles/sec, Knots,

Mach

§Options§ Open menu.

Add currency

Set as base

Edit rate

Enter new currency and

exchange rate.

Converting the units/currency

Use entered currency as

basic currency.

Select the source unit/

currency.

Change the exchange

rate of the basic currency.

Switch to the input field.

Calc.

Start calculator.

Enter the quantity to be

converted.

(For standard functions see p. 17)

Switch to the selection

field.

Stopwatch

Select the target meas-

urement unit/currency.

The result is displayed.

C ¢ ¢Stopwatch

Two intermediate times can be

recorded and saved.

You can use both input fields alter-

nately.

Display also in stand-by mode.

Special key functions:

Start/stop.

Enter decimal point.

Save intermediate time.

Change sign.

After a stop:

Currency

§Reset§

Reset to zero.

When you call up the function, you

must enter a basic currency into

which the conversions are to be

made.

Enter currency

(e.g. euro).

Extras

111

Stopwatch options

§Options§ Open menu.

Remote synchronisation

C ¢ ¢Remote syncr.

Stopwatch list

Display saved entries.

You can use this function remotely

to access externally filed data

(addresses, calendar, etc.) and syn-

chronise these with the data on your

phone. The data can, for example,

be saved on a company computer or

the Internet, e. g.:

(For standard functions see p. 17)

Countdown

C ¢ ¢Countdown

A set time elapses. The last

www.siemens-mobile.com/syncml

3 seconds are indicated by a beep.

At the end a special beep sounds.

Synchronise

Display also in stand-by mode.

If no time has been entered:

§Sync§

The computer is selected

and synchronisation

started. When completed,

the actions which have

been performed are dis-

played.

Open input window.

Set period of time.

Confirm.

§Next§

Scroll through the various

displays.

Start.

Sync. setting

If a countdown time is specified:

The following settings can be made

prior to synchronisation:

Start countdown.

While the time is elapsing:

Active profile

You can choose between 5 profiles.

Interrupt counter.

Select profile.

Let counter continue

running.

Activate profile.

§Reset§

Reset counter to starting

time.

112

Extras

Last sync:

§Edit§

Set profile

Time of the last synchronisation.

Server sett.

Providers

Sync. mode

• Sync data: Modified data or All data

Display the current serv-

ice provider.

• Sync direction: Two-way,

Mobile update or Server update

Homepage:

Port:

Set the homepage

Sync items:

Highlight database areas to be

synchronised:

Enter port number.

e.g. 80.

Enter user name

(login name).

Calendar

Contacts

Notes

Password:

Enter password (shown

as a series of asterisks).

Tasks

Calendar path

Contacts path:

Notes path

Save settings.

Task path

HTTP authen-

tication:

Confirmation required;

Yes/No (if No, the input

fields are not visible).

HTTP name:

Enter name.

HTTP

password:

Enter password.

Media player

113

Melodies

The media playback offers the fol-

lowing functions for melody play-

back:

Media player

When you are viewing a picture or

listening to a melody, the applica-

tion starts a media playback.

Play or stop, depending

on the situation.

Browse to the next media

file.

Switch on display illumi-

nation.

^–9

Set volume.

§Stop§

Switch to mute.

Pictures

The following functions can be

applied to a displayed picture:

Pause function.

End playback.

Zoom function if the dis-

played picture has a

higherresolutionthan the

display. The two soft keys

(+/-) enlarge/reduce the

picture. The joystick

Options

§Options§ Open menu.

Different functions are offered

depending on the starting situation

and the object.

moves the picture detail.

Volume

Set the volume with the

joystick.

5 Centre the picture.

Set as...

Set picture as Wallpaper,

Logo for example, and

sounds for Incoming call,

Startup melody, for

example.

Switch to full screen

mode and back again.

§Send§

E.g., send via MM S.

Slideshow

Edit

Automatic run-through in

full-picture mode. Individ-

ual picture connection with

joystick.

Access to picture editing.

(For standard functions see p. 17)

114

My stuff

My stuff options

My stuff

§Options§ Open menu.

To organise your files, you can use

the file system like a PC file manager.

There are some folders for the

various data types in My stuff for this

purpose. The relevant folders con-

tain the download function for load-

ing new items such as pictures and

sounds.

Move

Place highlighted file(s) or

folder in temporary memory.

Copy

Place highlighted file(s) or

folder in temporary memory.

Paste

Transfer content of temporary

memory into current folder.

C ¢N

New folder

Create a new folder and

name it.

The list of the folders and files is dis-

played.

Thumbn.

view

Switch over to miniature

view.

Navigation

Attributes

Display information on file or

folder selected.

Select file/folder in lists.

The cursor can be moved

(For standard functions see p. 17)

as required in the pre-

view.

Open folder, start down-

load or start file with

related application.

My stuff

115

Index structure

Some folders have already been cre-

ated for different data types in

My stuff. These folders cannot be

changed.

Folder

Description

Format

bmp

bmx

jpg/jpeg

png

Pictures

gif

Animati-

ons

bmx

gif

Switch on/off

animations

Sounds

mid

Melodies

amr

wav

sdt

Themes

Loaded theme

(zipped)

stc

Theme configura-

tion (unzipped)

Colour

skins

scs

Loaded user inter-

faces

Games

jar

Java archive

jad

Download info

Applicati-

ons

Applications

Misc.

tmo

Text modules

vmo

Voice recordings

Depending on the service provider, the

structure, content and functionality of

My stuff may vary.

116

Mobile Phone Manager

The Windows® PC program, Mobile

Phone Manager, allows you to use

extended phone functions from your

PC. Among other things, you can

easily manage your phone’s Address-

book, read, store and send SMS and

MMS messages, or synchronise your

phone with Outlook®. The phone

and PC communicate with one

another via a data cable

Contacts management

You can use contacts management

to manage, delete and edit the per-

sonal contacts on your phone and to

add new ones. You can compare and

copy contacts between your phone,

Microsoft Outlook® and other

(Accessories, p. 129).

Siemens phones (including Gigaset).

SMS and MMS management

(messages)

MPM

Mobile Phone

Manager

You can download the software

from the Internet:

You can create MMS and SMS mes-

sages conveniently using your PC.

This means you can use all the

options your PC offers, and use your

sounds and pictures to create MMS

and EMS messages. You can read,

forward, print, delete and archive

your messages.

www.siemens.com

Mobile Phone Manager

117

Backup and restore

Processing pictures and photos

(images)

You can use the backup function to

save backup copies of your phone

data regularly to your PC. If you

should lose the data you have in

your phone or change your phone

you can quickly re-instate all the data

using the restore function.

Picture/photo processing offers the

user the opportunity to conveniently

create, edit and manage pictures

and photos. Filters and effects are

offered with which to create attrac-

tive graphics. The user-friendly inter-

face makes it easy to transfer pic-

tures from and into the mobile

Bookmark management

(browser & bookmarks)

phone and to change their graphic

settings (e.g. background images).

Use your PC to browse through Inter-

net and define your preferred

Browser sites. Save the Internet

addresses as bookmarks on your

phone so that you can find them

quickly at a later time when you are

on the move.

Phone Explorer

You can access your phone’s file sys-

tem with the Phone Explorer. Files

such as photos and sounds can easily

be copied between your phone and

PC by dragging and dropping.

118

Mobile Phone Manager

Ringtone and MP3 management

(sounds)

The sound module offers the user

the opportunity to conveniently

manage just about any sound format

and store it on the phone. In addition

it supports MP3 play lists and the

configuration of their ringtones. It is

not possible to manage or play back

MP3 files.

Questions & Answers

119

Questions & Answers

If you have any questions on the use of your phone, you can contact us at

www.siemens.com/mobilephonescustomercare around the clock. As further help we

have listed below some frequently asked questions and answers.

Problem

Possible causes

Possible solution

Phone cannot be

switched on.

On/Off key not pressed long

enough.

Press On/Off key for at least 2 seconds.

Flat battery.

Charge battery. Check charging indicator in

the display.

Battery contacts dirty.

Clean contacts.

See also below under

"Charging error".

Too little standby

time.

Frequent use of applications such Restrict use if applicable.

as organiser, games, camera.

Fast search activated.

Deactivate fast search(p. 90).

Display illumination switched on. Switch off display illumination (p. 77).

Unintentional keystrokes

(illumination!).

Activate key lock (p. 87).

Charging error

(charge icon not

displayed).

Battery totally discharged.

1) Plug in charger cable, battery is on charge.

2) Charge icon appears after approx. 2 hours.

3) Charge battery.

Temperature out of range:

+5 °C to +40 °C.

Make sure the ambient temperature is right, wait for

a while, then recharge.

Contact problem

Check power supply and connection to the phone.

Check battery contacts and telephone connection

socket, clean them if necessary, then insert battery

again.

No mains voltage.

Use different mains power socket; check mains

voltage.

Wrong charger.

Battery faulty.

Only use original Siemens accessories.

Replace battery.

SIM error.

SIM card not inserted correctly. Check that the SIM card is inserted correctly (p. 9).

Dirty SIM card contacts.

Clean SIM card with a dry cloth.

Use 3V SIM cards only.

SIM card with wrong voltage.

SIM card damaged

(e.g., broken).

Carry out a visual check. Ask service provider to

change SIM card.

120

Questions & Answers

Problem

No network

connection.

Possible causes

Weak signal.

Possible solution

Move higher, to a window or an open space.

Check service provider’s coverage area.

Complain to the service provider.

Outside GSM range.

Invalid SIM card.

New network not authorised.

Try manual selection or select a different network

(p. 89).

Network call barring is set.

Network overloaded.

Signal too weak.

Check network barrings (p. 88).

Try again later.

Phone loses

network.

Reconnection to another service provider is auto-

matic (p. 89). Switching phone off and on again can

speed this up.

Calls not possible. Second line set.

New SIM card inserted.

Set first line \ (p. 90).

Check for new barrings.

Reset limit with PIN2 (p. 41)

Load credit.

Charge limit reached.

Credit used up.

Certain uses of

phone not possible.

Call restrictions are in place.

Barrings can be set by service provider.

Check barrings (p. 88).

Impossible to make Phonebook/Addressbook is full. Delete entries in the Addressbook

entries in Phone-

(p. 33)/Phonebook (p. 35).

book/Addressbook.

Voice message not Call divert to mailbox not set.

functioning.

Set call divert to mailbox (p. 66).

Delete SMS or archive (p. 48).

Delete MMS.

flashes to indi- SMS memory is full.

cate an SMS.

flashes to indi- MMS memory is full.

cate an MMS.

flashes to indi- Phone memory full.

cate an MMS.

Delete messages, pictures, games or applications.

Function cannot

be set.

Not supported by service pro- Contact your service provider.

vider or registration required.

Capacity problems Phone memory full.

with, for example,

Delete files in the relevant areas. You can use the

memory assistant to delete specific files (p. 83).

Games & More, ring-

tones, pictures, SMS

archive.

No Browser access, Profile not activated, profile set- Activate or set Browser profile (p. 70). If necessary

downloading not

possible.

tings wrong/incomplete.

ask your service provider.

Questions & Answers

Possible solution

121

Problem

Possible causes

Text message can- Service provider does not sup- Contact your service provider.

not be sent.

port this service.

Phone number for service

Set service centre (p. 49).

centre not set or incorrectly set.

SIM card contract does not sup- Contact your service provider.

port this service.

Service centre too busy.

Repeat message.

Recipient does not have a com- Check.

patible phone.

EMS pictures &

Destination phone does not sup-

sounds are not dis- port the EMS standard.

played on the desti-

nation phone.

No Internet access Incorrect Browser profile set, or Check Browser settings (p. 70); contact your serv-

possible.

wrong or incomplete settings. ice provider if necessary.

PIN error/

PIN2 error.

Three wrong entries. Enter the PUK (MASTER PIN) supplied with the

SIM card according to the instructions. If the PUK

(MASTER PIN) has been lost, contact your service

provider.

Phone code error. Three wrong entries.

Contact Siemens Service (p. 122).

Service provider

code error.

No authorisation for this service. Contact your service provider.

Missing/too many

menu entries

Functions may have been

added or deleted by the service

provider via the SIM card.

Check with your service provider.

Charge meter does Charge pulse is not being trans- Contact your service provider.

not work

mitted.

Damage

Severe shock

Remove battery and SIM and re-insert them. Do not dismantle the phone!

Phone became wet. Remove battery and SIM. Dry immediately with a cloth, but do not apply heat.

Dry connector contacts thoroughly. Stand mobile upright in an air current. Do not dis-

mantle the phone!

Reset settings to the factory default, p. 83: # 9 9 9 9 #

122

Customer Care

If repair work is necessary, please contact

one of our service centres:

We offer fast, individual advice! You have

several options:

Our online support on the Internet:

Abu Dhabi .........................................0 26 42 38 00

Argentina .....................................0 80 08 88 98 78

Australia..........................................13 00 66 53 66

Austria.............................................05 17 07 50 04

Bahrain .................................................... 40 42 34

Bangladesh.......................................0 17 52 74 47

Belgium.............................................0 78 15 22 21

Bolivia ...............................................0 21 21 41 14

Bosnia Herzegovina..........................0 33 27 66 49

Brazil............................................0 80 07 07 12 48

Brunei ................................................. 02 43 08 01

Bulgaria............................................... 02 73 94 88

Cambodia ........................................... 12 80 05 00

Canada ........................................1 88 87 77 02 11

China ...........................................0 21 38 98 47 77

Croatia ..............................................0 16 10 53 81

Czech Republic.................................2 33 03 27 27

Denmark ............................................. 35 25 86 00

Dubai ................................................0 43 96 64 33

Egypt.................................................0 23 33 41 11

Estonia.................................................. 6 30 47 97

Finland............................................09 22 94 37 00

France.............................................01 56 38 42 00

Germany *....................................0 18 05 33 32 26

Greece............................................80 11 11 11 16

Hong Kong.......................................... 28 61 11 18

Hungary ..........................................06 14 71 24 44

Iceland .................................................. 5 11 30 00

India.............................22 24 98 70 00 Extn: 70 40

Indonesia .....................................0 21 46 82 60 81

Ireland.............................................18 50 77 72 77

Italy .................................................02 24 36 44 00

Ivory Coast.......................................... 05 02 02 59

Jordan...............................................0 64 39 86 42

Kenya.................................................... 2 72 37 17

Kuwait................................................... 2 45 41 78

Latvia .................................................... 7 50 11 18

Lebanon.............................................. 01 44 30 43

Libya ...............................................02 13 50 28 82

Lithuania ...........................................8 52 74 20 10

Luxembourg........................................ 43 84 33 99

Macedonia .......................................... 02 13 14 84

www.siemens.com/

mobilphonescustomercare

We can be reached any time, any place.

You are given 24 hour support on all

aspects of our products. Here you will find

an interactive fault-finding system, a com-

pilation of the most frequently asked ques-

tions and answers, plus user guides and

current software updates to download.

When calling customer service, please

have ready your receipt and the phone

identity number (IMEI, to display press

# 0 6 #), the software version (to dis-

play, press # 0 6 #, then §More§) and if

available, your Siemens Service customer

number.

You will also find the most frequently

asked questions and answers in the sec-

tion entitled "Questions & Answers" on

page 119 in this user guide.

You can also get personal advice about our

range of products on our Premium Hotline:

United Kingdom...................0906 9597500

(0.75 £ per minute)

Qualified Siemens employees are waiting to

offer you expert information about our

products and installation.

In some countries repair and replace

services are impossible where the products

are not sold through our authorised dealers.

Customer Care

123

Malaysia....................................+ 6 03 77 12 43 04

Malta.......................................+ 35 32 14 94 06 32

Mauritius ................................................2 11 62 13

Mexico .......................................01 80 07 11 00 03

Morocco...............................................22 66 92 09

Netherlands .................................0 90 03 33 31 00

New Zealand...................................08 00 57 43 63

Nigeria ..............................................0 14 50 05 00

Norway.................................................22 70 84 00

Oman....................................................... 79 10 12

Pakistan..........................................02 15 66 22 00

Paraguay ..........................................8 00 10 20 04

Philippines ........................................0 27 57 11 18

Poland.............................................08 01 30 00 30

Portugal ............................................8 08 20 15 21

Qatar....................................................04 32 20 10

Romania .........................................02 12 04 60 00

Russia..........................................8 80 02 00 10 10

Saudi Arabia .....................................0 22 26 00 43

Serbia .............................................01 13 07 00 80

Singapore ............................................62 27 11 18

Slovak Republic ..............................02 59 68 22 66

Slovenia............................................0 14 74 63 36

South Africa ....................................08 60 10 11 57

Spain.................................................9 02 11 50 61

Sweden.............................................0 87 50 99 11

Switzerland .....................................08 48 21 20 00

Taiwan ............................................02 23 96 10 06

Thailand............................................0 27 22 11 18

Tunisia .................................................71 86 19 02

Turkey..........................................0 21 65 79 71 00

Ukraine ........................................8 80 05 01 00 00

United Arab Emirates........................0 43 66 03 86

United Kingdom ...........................0 87 05 33 44 11

USA .............................................1 88 87 77 02 11

Vietnam...........................................84 89 20 24 64

Zimbabwe ............................................04 36 94 24

124

Care and maintenance

Your phone has been designed and

crafted with great care and attention

and should also be treated with care.

The suggestions below will help you

to enjoy your phone for many years.

• Do not drop, knock or shake your

phone. Rough handling can dam-

age components inside the

device!

• Do not use harsh chemicals, clean-

ing solvents, or strong detergents

to clean the phone!

• Protect your phone from moisture

and humidity! Precipitation,

humidity and liquids contain min-

erals that will corrode electronic

circuits. Should your phone none-

theless become wet, disconnect it

immediately from any power sup-

ply, remove the battery and leave

the open phone to dry at room

temperature!

The suggestions given above apply

equally to your phone, battery,

charger and all accessories. If any of

these parts are not working properly,

take them to your nearest qualified

service outlet. The personnel there

will assist you and, if necessary,

repair the device.

• Do not use or store the phone in

dusty, dirty areas. Its moving parts

may become damaged.

• Do not store your phone in hot

areas. High temperatures can

shorten the life of electronic

devices, damage batteries and

warp or melt certain plastics.

• Do not store your phone in cold

areas. When the phone warms up

again (to its normal ambient tem-

perature), moisture can form

inside the phone, which may dam-

age electronic components.

Product data

125

Phone ID

Product data

Declaration of conformity

You will need the following details if you

lose your phone or SIM card:

the number of the SIM card (on the card):

...................................................................

15-digit serial number of the phone

(under the battery):

Siemens Information and Communi-

cation mobile hereby declares that

the phone described in this user

guide is in compliance with the

essential requirements and other rel-

evant provisions of European Direc-

tive 1999/5/EC (R&TTE). The declara-

tion of conformity (DoC) concerned

has been signed. Please call the com-

pany hotline if you require a copy of

the original, or:

...................................................................

the customer service number of the service

provider:

...................................................................

Lost phone

If you lose your phone or SIM card contact

your service provider immediately to pre-

vent misuse.

www.siemens.com/mobiledocs

Operating times

Technical data

The operating time depends upon

the respective conditions of use.

Extreme temperatures considerably

reduce the phone’s standby time.

Avoid placing the phone in the sun

or on a heater.

GSM class:

Frequency range: 880 - 960 MHz

GSM class: 1 (1 watt)

Frequency range: 1,710 - 1,880 MHz

GSM class: 1 (1 watt)

Frequency range: 1,850 - 1,990 MHz

4 (2 watt)

Talktime: 100 to 300 minutes.

Standby time: 60 to 250 hours

Action taken Time Reduction of stand-

(min) by time by

Weight:

Size:

86 g

Calling

Light *

30 - 90 minutes

40 minutes

105 x 47 x 18 mm

(75.6 ccm)

Network

Li-Ion battery:

600 mAh

5 - 10 minutes

Operating

temperature:

* Keypad input, games, organiser etc.

-10 °C to 55 °C

3.0 V

SIM card:

126

SAR – European Union (RTTE)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

THIS MOBILE PHONE MEETS THE LIMITS

SET BY THE EU (1999/519/EC) FOR PRO-

TECTION OF THE HEALTH OF THE PUB-

LIC FROM THE EFFECTS OF EXPOSURE

TO ELECTROMAGNETIC FIELDS

only the power required to reach the net-

work. In general, the closer you are to a base

station, the lower the power output.

The highest SAR value for this model phone

when tested for compliance against the

norm is

0,73 W/kg****.

These limits are part of comprehensive rec-

ommendations for the protection of the pub-

lic. The recommendations were developed

and confirmed by independent scientific

organisations through periodic and thorough

evaluation of scientific studies*. The limits

include a substantial safety margin designed

to assure the safety of all persons, regard-

less of age and health.

The SAR information can also be found on

the Siemens web site at

www.siemens.com/mobilephones

While there may be differences between the

SAR levels of various phones and at various

positions, all Siemens products meet the

legal requirements.

The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland)

states that present scientific information

does not indicate the need for any spe-

cial precautions for use of mobile

phones.

Before a radio equipment may be placed on

the market, compliance with the European

laws and the respective technical limit

requirements must be demonstrated. Only

then the CE mark may be affixed**. The limit

for mobile phones recommended by the

Council of the European Union employs a

unit of measurement known as the Specific

Absorption Rate, or SAR. This SAR limit is

2.0 W/kg***. This corresponds with the

requirements of the International Commis-

sion for Non-Ionizing Radiation Protection

ICNIRP and was adopted into the European

Norm for Mobile Radio Equipment EN

50360. The SAR of mobile phones is deter-

mined in accordance with the European

Norm EN 50361. This involves measuring

the maximum value in all frequency bands of

the mobile phone with the phone transmit-

ting at its highest power level. The actual

SAR level of the phone during normal opera-

tion may be well below the maximum value.

This is because the phone is designed to

operate at multiple power levels so as to use

Further information:

www.who.int/peh-emf,

www.mmfai.org,

www.siemens.com/mobilephones

** The CE mark confirms that the product

is in compliance with the legal require-

ments of the European Union as a pre-

requisite for the placing on the market

and the free movement of goods within

the European internal market.

*** averaged over 10 g body tissue.

**** SAR values may vary depending on

national requirements and frequency

bands. SAR information for different

regions can be found at

www.siemens.com/mobilephones

SAR – International (ICNIRP)

127

SAR – International (ICNIRP)

INFORMATION ON RF EXPOSURE/

SPECIFIC ABSORPTION RATE (SAR)

The highest SAR value for this model phone

when tested for use at the ear is

THIS MOBILE PHONE MEETS THE LIMITS

FOR PROTECTION OF THE HEALTH OF

THE PUBLIC FROM THE EFFECTS OF

EXPOSURE TO ELECTROMAGNETIC

FIELDS

0,73 W/kg***.

SAR information can also be found at

www.siemens.com/mobilephones

While there may be differences between the

SAR levels of various phones and at various

positions, they all meet the international

guidelines for safe RF exposure.

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured

not to exceed the limits for exposure to radio

frequency (RF) energy recommended by

international guidelines from the Interna-

tional Commission on Non-Ionizing Radia-

tion Protection (ICNIRP). These limits are

part of comprehensive guidelines for the pro-

tection of the public and establish permitted

levels of RF energy for the population. The

guidelines were confirmed by independent

scientific organisations through periodic and

thorough evaluation of scientific studies*.

The limits include a substantial safety mar-

gin designed to assure the safety of all per-

sons, regardless of age and health.

The World Health Organization (WHO,

CH-1211 Geneva 27, Switzerland)

states that present scientific information

does not indicate the need for any spe-

cial precautions for use of mobile

phones.

Further information:

www.who.int/peh-emf,

www.mmfai.org,

www.siemens.com/mobilephones

** averaged over 10g of tissue.

*** SAR values may vary depending on

national requirements and frequency

bands. information for different regions

can be found at

The exposure limit for mobile phones

employs a unit of measurement known as

the Specific Absorption Rate, or SAR. The

SAR limit stated in the international guide-

lines is 2.0 W/kg**. Tests for SAR are con-

ducted in all frequency bands using standard

operating positions with the phone transmit-

ting at its highest power level. The actual

SAR level of the phone during operation can

be well below the maximum value. This is

because the phone is designed to operate at

multiple power levels so as to use only the

power required to reach the network. In gen-

eral, the closer you are to a base station, the

lower the power output.

www.siemens.com/mobilephones

128

Quality

Battery quality statement Displayqualitystatement

The capacity of your mobile phone

battery will reduce each time it is

charged/emptied. Storage at too

high or low temperatures will also

result in a gradual capacity loss. As

a result the operating time of your

mobile phone may be considerably

reduced, even after a full recharge of

the battery.

For technological reasons, some

small dots in other colours may

appear in the display in rare cases.

Please remember that if some dots

appear brighter or darker in the dis-

play, this generally does not mean

that a fault has occurred.

Regardless of this, the battery has

been designed and manufactured so

that it can be recharged and used for

six months after the purchase of

your mobile phone. After six months,

if the battery is clearly suffering from

loss of performance, we recommend

that you replace it. Please buy only

Siemens original batteries.

Accessories

129

Accessories

Fashion & Carry

Handsfree Portable

CLIPit™ covers

Headset PTT HHS-510

Headset PTT HHS-610

Headset Purestyle HHS-610

Changeable faceplates as well as keypads

are available in specialist shops. Alterna-

tively, you can visit our online shop.

Headset with PTT key to accept and end

calls

Carrying Cases

A range of carrying cases is available at spe-

cialist shops or you can visit the Siemens

Mobile Store online:

Office

Data Cable DCA-500

For connecting the phone to the serial

RS232 port of the PC.

Original Siemens Accessories

www.siemens.com/shop

Data Cable USB DCA-540

For connecting the phone to the USB port of

the PC. With load function.

Energy

Li-Ion battery (600 mAh) EBA-670

Spare battery

SyncStation DSC-600

Table support for the phone to facilitate

simultaneous data exchange and telephone

charging. Contains a desktop stand and a

data cable USB.

Travel Charger

Travel Charger ETC-500 (EU)

Travel Charger ETC-510 (UK)

Multitainment

Travel charger with an extended input volt-

age range of 100-240 V.

Plug-in Flash IFL-600

Plug-in flash module for taking photos in

areas with low ambient light.

Car Charger Plus ECC-600

Charger for the cigarette lighter socket in

the car. It is possible to make phone calls

during charging.

130

Accessories

Car Solutions

Mobile Holder HMH-680

Cradle without antenna port.

Mobile Holder HMH-685

The cradle for connecting an external

antenna. Ideal for use with headset PTT or

car kit portable.

Can also be used as cradle for retrofitting

your handsfree car kit (series 55).

Car Kit Comfort HKC-680

Handsfree kit with first-class digital call qual-

ity and supreme ease of use. Includes all

components needed for installation. The

individual antenna solution is available in

specialist shops.

Car Kit Easy HKP-600

Facilitates convenient handsfree talking with

high call quality. With the integrated, rotating

cradle and the flexible microphone position-

ing, the phone can be optimally adjusted to

suit any vehicle interior. The power is sup-

plied via the cigarette lighter socket.

Optional Car Kit accessories

Car Data Adapter HKO-690

Phone-in Adapter HKO-570

Products can be obtained in specialist shops

or you can visit the Siemens Mobile Store

online:

Original Siemens Accessories

www.siemens.com/shop

Guarantee certificate (UK)

131

Guarantee certificate (UK)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer's Guarantee under the condi-

tions set out below:

• This Guarantee shall apply to new devices

purchased in the European Union.

For Products sold in the United Kingdom the

Guarantee is issued by Siemens plc,

Siemens House, Oldbury, Bracknell,

Berkshire, RG12 8FZ.

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. For wearing parts

(e.g., batteries, keypads, housings, small

parts on housings, protective coverings

where included in the scope of delivery),

this durability guarantee shall be valid for

six months from the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

treatment and/or failure to comply with

information contained in the user manuals.

• This Guarantee shall not apply to or

extend to services performed by the

authorised dealer or the customer them-

selves (e.g. installation, configuration,

software downloads). User manuals and

any software supplied on a separate data

medium shall be excluded from the Guar-

antee.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer's liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens telephone service. The relevant

number is to be found in the accompanying

user guide.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

132

Guarantee certificate (IRL)

Without prejudice to any claim the user (cus-

tomer) may have in relation to the dealer or

retailer, the customer shall be granted a

manufacturer’s Guarantee under the condi-

tions set out below:

• In the case of new devices and their com-

ponents exhibiting defects resulting from

manufacturing and/or material faults within

24 months of purchase, Siemens shall, at

its own option and free of charge, either

replace the device with another device

reflecting the current state of the art, or

repair the said device. In respect of parts

subject to wear and tear (including but not

limited to, batteries, keypads, casing), this

warranty shall be valid for six months from

the date of purchase.

• This Guarantee shall be invalid if the

device defect is attributable to improper

care or use and/or failure to comply with

information contained in the user manuals.

In particular claims under the Guarantee

cannot be made if:

• The device is opened (this is classed as

third party intervention)

• Repairs or other work done by persons not

authorised by Siemens.

• Components on the printed circuit board

are manipulated

• The software is manipulated

• Defects or damage caused by dropping,

breaking, lightning or ingress of moisture.

This also applies if defects or damage was

caused by mechanical, chemical, radio

interference or thermal factors (e.g.:

microwave, sauna etc.)

• Devices fitted with accessories not author-

ised by Siemens

• This Guarantee shall not apply to or

extend to services performed by the

authorised dealer or the customer them-

selves (e.g. installation, configuration,

software downloads). User manuals and

any software supplied on a separate data

medium shall be excluded from the Guar-

antee.

• The purchase receipt, together with the

date of purchase, shall be required as evi-

dence for invoking the Guarantee. Claims

under the Guarantee must be submitted

within two months of the Guarantee

default becoming evident.

• Ownership of devices or components

replaced by and returned to Siemens shall

vest in Siemens.

• This Guarantee shall apply to new devices

purchased in the European Union. For

Products sold in the Republic of Ireland the

Guarantee is issued by Siemens Ireland

Limited, Ballymoss Road, Sandyford

Industrial Estate, Dublin 18 - The Republic

of Ireland.

• Any other claims resulting out of or in con-

nection with the device shall be excluded

from this Guarantee. Nothing in this Guar-

antee shall attempt to limit or exclude a

Customers Statutory Rights, nor the man-

ufacturer’s liability for death or personal

injury resulting from its negligence.

• The duration of the Guarantee shall not be

extended by services rendered under the

terms of the Guarantee.

• Insofar as no Guarantee default exists,

Siemens reserves the right to charge the

customer for replacement or repair.

• The above provisions does not imply a

change in the burden of proof to the detri-

ment of the customer.

To invoke this Guarantee, please contact the

Siemens helpdesk on 1850 777 277. This

number is also to be found in the accompa-

nying user guide.

Menu tree

133

Menu tree

Default book

Show entries

New entry

Business card

Groups

Default book

Call records

Calls missed

Calls received

Calls dialled

Delete records

Time/charge

Last call

All outgoing

All incom.calls

Remain. units

Charge sett.

Currency

Personal rate

Surf & fun

URL/service provider

Games

Account limit

Auto display

Applications

Downl. assist.

Bookmarks

Internet

Camera

Messages

Create new

SMS text

MMS

Inst. message

134

Menu tree

Messages

Inbox

SMS

MMS

WAP push

CB messages

Draft

SMS

MMS

Unsent

SMS

MMS

Sentbox

SMS

MMS

MMS templates

SMS archive

Text modules

Message setup

Text zoom

SMS setup

MMS setup

SMS profiles

SMS signature

WAP push set.

Voice message

Security sett.

Help

CB services

Receive CB

Read new CB

Topic list

Auto display

Topic index

CB languages

Organiser

Calendar

Appointments

Tasks

Notes

Missed appts.

Menu tree

135

Organiser

Extras

Dictat.machine

Time zones

Calendar setup

SIM services

Alarm clock

Walky Talky

Sound recorder

Calc.

Unit converter

Stopwatch

Countdown

Remote syncr.

My stuff

Setup

Profiles

Themes

Display

Language

Text input

T9 preferred

Input language

Wallpaper

Logo

Colour skin

Screensaver

Start up anim.

Shutdn anim.

Own greeting

Big letters

Illumination

Ringtones

Ringer setting

Silent alert

136

Menu tree

Setup

Ringtones

Volume

Calls

Walky Talky

Messages

CB services

Alarm clock

Organiser

System

d Calls

Group calls

Other calls

Walky Talky

Applications

More melodies

Messages

Alarm clock

Organiser

Startup melody

Shutdown mel.

Sound recorder

Call setup

Hide ID

Call waiting

Divert

All calls

Call screening

Any key answ.

Minute beep

Unansw. calls

Not reachable

No reply

Busy

Status check

Clear all

Phone setup

Key tones

Info tones

Auto off

Phone identity

Memory assis.

File system

Master reset

Format

Clean up

Menu tree

137

Setup

Clock

Time/date

Time zones

Date format

Time format

Buddhist year

Show clock

Auto time

Connectivity

GPRS

GPRS info

IrDA

Data services

HTTP profile

Authentication

Security

Auto key lock

Direct call

Only ‚

PIN codes

PIN control

Change PIN

Change PIN2

Chg.phonecode

This SIM only

Barrings

All outgoing

Outgoing intl.

Out.int.x.home

All incoming

When roaming

Status check

Clear all

138

Menu tree

Setup

Network

Line

Select line

Protected

Network info

Choose netwrk

Auto network

Pref. network

Band selection

Fast search

User group

Active

Select group

Outgo. access

Pref. group

Accessories

Car Kit

Auto answer

Auto off

Car loudspk.

Headset

Auto answer

Index

139

Index

Accessories ...............................129

Addressbook

Calculato r ................................. 109

Calendar..................................... 95

Call

Dial entry ................................35

Groups ....................................36

New entry ...............................33

Read entry...............................35

Aircraft mod e ..............................74

Alarm

Alarm clock ...........................107

Type........................................97

Alarm clock ...............................107

All calls (diversion) ......................81

All incoming (barrings )................88

Answering service (external) .......66

Any to answe r .............................81

Appointments .............................96

Auto display

Clock.......................................84

Duration/charge s .....................41

Auto key lock ..........................6, 87

Auto time zone ...................84, 100

Auto. network selection ..............89

Auto. redial .................................26

Automobile accessories .............130

Acce pt/end ............................. 27

Barring.................................... 88

Charges .................................. 41

Conference ............................. 29

Divert ..................................... 80

End......................................... 25

Hold ....................................... 27

Menu...................................... 29

Reject ..................................... 27

Swap (change)........................ 27

Call back..................................... 26

Call divert ................................... 80

Call sc reenin g ............................. 81

Cal l tran sfe r ................................ 29

Call wai ting .......................... 28, 80

Calling........................................ 25

Calls dialled (call record) ............. 40

Calls rec eived (call record) .......... 40

Camera....................................... 42

Car Kit

Accessories ........................... 130

Setting .................................... 91

Car ki t accessories..................... 130

Care of phone........................... 124

Cell Broa dcast (CB)...................... 67

Change th e faceplate.................. 12

Ch ange th e keypad mat .............. 12

Changin g the faceplate............. 129

Changin g the keypa d ................ 129

Charge rate ................................ 41

Charges...................................... 41

Charging the battery................... 10

CLIPIt™ covers ............................ 12

Clock .......................................... 84

Colour skin ................................. 76

Band selection.............................90

Battery

Charge ....................................10

Insert ........................................9

Operating times...............11, 125

Quality Declaratio n ................128

Big letters....................................77

Bookmarks ............................68, 70

Browser ......................................69

Buddh. year.................................84

Business card ..............................32

Busy number...............................26

140

Index

Conference .................................29

Connection profiles .....................85

Connectivity................................85

Contact list..................................60

Control code (DTMF) ...................30

Countdow n ...............................111

Credit limi t ..................................41

CSD settings................................86

Currency ...................................110

Customer care...........................122

Games an d applications .............. 71

GPRS .......................................... 85

Groups ....................................... 36

Guaran tee certificate ................ 131

Handset volume ......................... 25

Handsfree talking ....................... 27

Headset

Acce ssories ........................... 129

Setting .................................... 91

Hide ID ....................................... 80

Highli ghting mode...................... 18

Hold call ............................... 27, 29

Home network............................ 89

Hotline ..................................... 122

HTTP........................................... 86

Date format ................................84

Default book ...............................32

Delete assistan t ...........................83

Dialling code ...............................25

Dialling with number keys ...........25

Dictating machine .......................99

Digital rights management ..........15

Direct reply (SMS) .......................49

Display

Illumination.............................77

Language ................................76

Symbols ....................................7

Wallpape r ................................76

Divert..........................................80

Download ...................................71

DTMF codes (control codes) ........30

Duration/charges.........................41

Identity number (IMEI)................ 82

IMEI number............................... 82

Inbox.......................................... 44

Info to ne s ................................... 82

Informatio n services (CB )............ 67

Infrared ...................................... 85

Infrared (IrDA) ............................ 85

Input language (T9 ).................... 22

Inst. Message ............................. 59

Internatio nal dialling code .......... 26

Internet ...................................... 68

Emergency numbe r .....................13

Extras........................................101

Fast acces s ..................................93

Fast search..................................90

Formatting (phone memory) .......83

Formatting (SMS text) .................45

Forwarding (call).........................29

Frequency range .........................90

Joystick ........................................ 5

Key to nes ................................... 82

Language ................................... 76

Limit (call time/charge) ............... 41

Logo........................................... 76

Loss of phone, SIM card ............ 125

Index

141

Mailbox.......................................66

Maintenance of phone ..............124

Master rese t ................................83

Media player .............................113

Controls ..................................16

My menu.................................92

Speed dialling..........................19

Menu speed dialling ....................18

Menu tree .................................133

Message

CB ...........................................67

MMS .......................................51

SMS ..................................45, 47

Message memory full. .................50

Message typ e ..............................49

Microphone on/off ......................29

Minute beep ...............................81

Missed appointments ..................98

Missed calls (call record)..............40

MMS

Lists ........................................56

Receive....................................55

Send .......................................54

Write.......................................51

Mobile Phone Manager .............116

Muting (microphone )..................29

My menu ....................................92

My phone ...................................31

My stuff ....................................114

One nu mber only........................ 30

Only ‚..................................... 87

Oper ating times (battery) ... 11, 125

Organiser ................................... 95

Own (p hone) numbers ............... 39

Own greetin g ............................. 77

Phon e (settings) ......................... 82

Phone code ................................ 19

Phone data ............................... 125

Phone identity number (IMEI) ..... 82

Phone number memo ................. 26

Phone number trans mission

on/of f......................................... 80

Phon ebook

Call an entry ........................... 38

New entry............................... 37

Protec ted SIM ......................... 39

Sp ecial book s .......................... 39

VIP numbers ........................... 39

Photo ......................................... 42

Pictures & sounds (SMS) ............. 46

Chan g e ................................... 19

Control ................................... 19

Enter ...................................... 13

Error ..................................... 121

PIN2 ........................................... 19

Preferred network....................... 89

Preventing accidental

activati on ................................... 20

Product dat a ............................. 125

Profiles

Browser .................................. 70

MMS....................................... 57

Phone ..................................... 73

SMS........................................ 49

Prompt ....................................... 26

Provider logo .............................. 76

PUK, PUK2 .................................. 19

Network

Barring ....................................88

Connection..............................89

Settings...................................89

Notes..........................................98

142

Index

SMS push ................................... 44

Software v ersion......................... 82

SOS ............................................ 13

Sound recorder......................... 108

Speci al books.............................. 39

Sp eci al character s ....................... 21

Speech time (battery) ............... 125

Speed dialling keys ..................... 94

Standard functions ..................... 17

Standby mode ............................ 15

Standby time ...................... 11, 125

Start up animation...................... 77

Stop watc h ................................ 110

Storage loc ation

(Phonebook)............................... 37

Surf & fu n................................... 68

Swa p.......................................... 27

Switch off phone

Automa tic............................... 82

Manually................................. 13

Switch on phone ........................ 13

Symbols ....................................... 7

Synchronisation........................ 111

Questions & Answers.................119

Records.......................................40

Redial..........................................25

Reminder ....................................26

Remote synchronisation ............111

Ringer setting..............................78

Ringtones..............................36, 78

Safety precautions.........................3

Screensaver ................................76

Second phone number ................89

Security.......................................19

Security code s .............................19

Service centre (SMS) ...................49

Service supplier portal .................31

Service tones...............................82

Set time/date ..............................84

Settings ......................................73

Short message (SMS) ..................45

Shown in the display .....................7

Shut down animatio n ..................77

Siemens City Portal......................31

Signal strength............................15

Silent alert ..................................78

SIM card

T9 text input............................... 22

Tasks .......................................... 98

Technical data .......................... 125

Text entry

With T9................................... 22

With out T9.............................. 21

Text mod ules.............................. 24

Themes ...................................... 75

This SI M only .............................. 87

Time zo nes ................... 14, 84, 100

Clear barring ...........................20

Insert ........................................9

Phonebook..............................39

Problem s ...............................119

SIM services (optional) ......105, 107

SMS

Archive....................................48

Lists ........................................48

Profile s ....................................49

Read........................................47

Settings...................................49

Signature ................................49

T9 input ..................................22

To group .................................46

Write.......................................45

Unanswered ............................... 80

Unit converter .......................... 109

Upper and lowercase

letters (T9) ................................. 21

User group ................................. 90

Index

143

Validity, SMS ...............................49

Voice message (mailbox).............66

Volume

Handset volume ......................25

Profile s ....................................73

Ringtone .................................78

Walky Talky ...............................101

Wallpaper (display)......................76

WAP............................................68

Shopsmith CD Changer System none User Manual
Seagate SAVVIO ST9900805SS User Manual
Sanyo ECD T1540 User Manual
Samsung SCH r610 User Manual
Samsung MM A700 User Manual
Samsung Gravity SGH T459 User Manual
Presto Scandinavian Design User Manual
Presto Coffeemaker User Manual
Philips CT5358 User Manual
Panasonic P2HD AJ HRW10G User Manual