Sharp SCH R850 User Manual

SCH-R850 Series  
P O R T A B L E  
M O B I L E  
User Manual  
D U A L - M O D E  
P H O N E  
Please read this manual before operating your  
phone, and keep it for future reference.  
Printed in Korea.  
®
Nuance , VSuite™ T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its  
affiliates in the United States and/or other countries.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
microSD and the microSD logo are Trademarks of the SD Card Association.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT “AS IS”, AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
®
Using T9 Mode (Phone Keypad Only) . . . . . . . . . . . . . . . . . . 46  
1
Section 8: easyedgeSM ..................................................60  
2
FCC Hearing-Aid Compatibility (HAC) Regulations for  
3
Section 1: Getting Started  
This section explains how to start using your SCH-R850 phone by  
activating your service, setting up your Voicemail, or getting an  
understanding of how this manual is put together.  
Text Conventions  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
appear in place of repeatedly-used procedural steps:  
Understanding this User Manual  
The chapters of this manual generally follow the same order as  
the menus and sub-menus in your phone. A robust index for  
quick reference to most features begins on page 156.  
select  
Touch a menu item or screen item to launch, access,  
or save a highlighted menu item or screen field of  
interest.  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page 128.  
Used in place of “select” in long “drill down”  
procedure steps.  
Notes and Tips  
Example: “...Settings  
Call Settings  
Call Answer...”  
Throughout this manual some text is set apart from the rest. In  
this way, important information, quick methods for activating  
features, to define terms, and more are emphasized. The  
definitions for these methods are as follows:  
Charging the Battery  
Your phone is powered by a rechargeable standard Li-Ion battery.  
Only use Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Use  
of other accessories may invalidate your warranty and may  
cause damage.  
Notes — Explain alternative options within the current feature, menu,  
or sub-menu.  
Tips — Provide quick or innovative methods for performing functions  
related to the subject at hand.  
Important — Points out important information about the current  
feature that could affect performance, or even damage your phone.  
Getting Started  
4
                 
Use the Travel Adapter  
3. If needed, install the battery in the phone. (For more  
The travel adapter included with  
your phone is a convenient,  
light-weight charger that rapidly  
charges your phone from any  
120/220 VAC outlet.  
4. Insert the smaller end of the Travel Adapter into the  
charger/accessory connector on the upper left side of your  
phone.  
Warning!: Your touch screen responds best to a light touch from the pad of  
your finger or a non-metallic stylus. Using excessive force or a  
metallic object when pressing on the touch screen may damage  
Incorrect  
1. Plug the large end of the  
USB Data Cable supplied  
with your phone into the  
Travel Adapter, as shown.  
Correct  
2. Plug the Travel Adapter into a standard 120 VAC or 220  
Important!: You must unplug the adapter before removing the battery from  
the phone during charging to avoid damage.  
VAC wall outlet.  
Low battery indicator  
Important!: For connection to an electrical supply not located in North  
America, you must use an adaptor of the proper configuration for  
the power outlet. Use of the wrong adapter could damage your  
phone and void your warranty.  
The battery indicator (  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
) in the upper-right corner of the  
Five bars (  
) indicate a full charge.  
An empty battery icon (  
) indicates a near empty battery.  
) and a tone sounding indicate  
A blinking empty battery icon (  
you have two to three minutes before the battery is too low to operate  
the phone.  
Incorrect  
Correct  
If you continue to use your phone without charging its battery, the  
phone will shut down.  
5
   
3. Place the battery cover  
over the battery (1) and  
slide the battery cover up  
into place (2).  
Activating Your Phone  
Contact your Wireless Carrier and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
Remove the Battery  
Install the Battery  
1. Press and hold  
to  
turn off the phone (if on).  
Note: Your phone comes packaged with a partially charged rechargeable  
standard Li-Ion battery and travel adapter.  
2. Press down on the  
battery cover, slide the  
cover (1) toward the  
Important!: You must fully charge the battery the first time you use your  
phone, otherwise you could damage the battery. From fully  
discharged to fully charged, the battery requires up to 4 hours of  
charge time.  
bottom end of the phone,  
then lift the cover away  
from the phone (2).  
1. Insert the top end of the  
battery first, matching  
the gold contacts on the  
battery to those on the  
inside of the phone.  
3. Lift the battery up (1) and  
away (2) from the phone,  
top end first.  
2. Press lightly on the  
bottom end of the battery down into the phone until it slips  
into place.  
Getting Started  
6
       
Turn Your Phone On  
1. Press and hold the  
Note: If your phone is on and you press  
for less than one second, the  
phone will not power off. This prevents your phone from being turned  
off accidentally.  
LOCK key (  
on the top of the  
phone.  
),  
Setting Up Your Voicemail  
Voicemail allows callers to leave voice messages, which can be  
retrieved any time.  
Note: As with any other radio-transmitting device, do not touch the antenna  
(at the bottom of the device) while using your phone as this can affect  
call quality and can cause the phone to operate at a higher power level  
than is necessary.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Message menu) to view details of voice  
messages in your Voicemail box.  
2. The phone begins searching for a network signal.  
1. In Standby mode, touch the Dialer soft key, then touch and  
3. Once the phone finds a signal, the time, date, and day  
hold  
or dial your own mobile number to dial  
appear in the second line of the display.  
4. You’re now ready to place and receive calls.  
2. Follow the prompts in the new user tutorial to setup your  
Note: If you are outside of your carrier’s coverage or roaming area, the No  
Service icon (  
) appears at the top of the phone’s display. If you  
mail box.  
cannot place or receive calls, try later when service is available, or at  
another location.  
Listen to Voicemail  
1. In Standby mode, touch the Dialer soft key, then touch and  
Turn Your Phone Off  
hold  
or dial your own mobile number to dial  
Press and hold the LOCK key (  
), on the top of the  
you will hear your voice greeting.  
phone, for two or more seconds. Your phone powers off.  
2. You are prompted to enter your password.  
7
       
3. Slowly release your pressure on the card. It will slide  
Memory Card (Optional)  
You can install a microSD card to provide additional memory  
for storing files (such as, sound files and photos) in your phone.  
outward a short distance.  
TM  
4. Remove the memory card from the memory card slot.  
5. If desired, install another memory card. (For more  
Install a Memory Card  
1. Open the microSD cover on the right hand side of the  
6. Replace the microSD cover.  
phone, as shown.  
Correct  
Incorrect  
2. Make sure that the gold contacts of the card are face  
down, as shown, then carefully slide the memory card into  
the memory card slot until you feel it click into place.  
3. Replace the microSD cover.  
Remove a Memory Card  
1. Open the microSD cover on the right hand side of the  
phone.  
2. Carefully press the memory card inward until you feel it  
release.  
Getting Started  
8
           
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also  
describes the screen format and the icons that will be displayed  
when the phone is in use.  
Front View of Your Phone  
Features of Your Phone  
Full-screen Touch Screen [high-resolution (240 x400 pixels), color]  
Widget bar and three-page Standby and Main Menu screens  
Motion and position sensitivity  
Full-HTML Browser  
Messaging (Text, Picture, Video, and Email) with QWERTY Touch  
Keypad  
3.0 Megapixel wide screen Camera-Camcorder  
High speed data (EVDO)  
0
®
Bluetooth Stereo (v2.0) Wireless Technology (see Note)  
Global Positioning (GPS) Technology  
PIM Functions  
Voice and Touch Keypad Dial  
Music (MP3) Player and Video (MP4) Player  
Memory Card slot (for optional microSD™ cards)  
Features  
1. Headset Connector — Used to connect an optional wired  
headset or TTY device to your phone.  
Note: The R850™ phone supports the wireless hands-free profile and the  
serial port profile for Bluetooth® v2.0 wireless technology. The R850™  
does not support Bluetooth OBEX profiles.  
2. Earpiece / Speaker — Lets you hear ringing and alert  
tones, alarm tones, and the other parties to calls.  
9
         
3. Power / Accessory Connector — Used to connect charging  
accessories or any available accessory cables to your  
phone.  
11. Voice Recognition Key — Used to launch VoiceSignal voice  
recognition system.  
12. Memory Card Slot — Used to plug in an optional  
microSD™ memory card for additional multimedia file  
storage.  
4. Volume Key — Lets you adjust the ring volume in Standby  
mode, adjust the voice volume during a call, or mute the  
ringer during an incoming call.  
13. Power On-Off/LOCK key — Turns the power on and off.  
5. Display — Indicates the status of your phone (including  
numbers dialed, feature and function screens, status  
icons, message indicators and contents, signal strength,  
and so on) and shows all touch controls (hot buttons,  
keypads, and menus).  
Locks and unlocks the keys and the touch screen and  
lights the backlight.  
6. Send Key — Lets you place or receive a call. In Standby  
mode, press the key once to access the Recent Calls log.  
7. Clear Key — Deletes characters from the display when you  
are in text entry mode. Press this key to return to the  
previous menu or screen when navigating features on your  
phone.  
8. Microphone — Lets the other caller hear you clearly when  
you are speaking to them.  
9. End Key — Ends a call. Returns you to Standby mode from  
any feature, function, or menu.  
10. Camera Key — Launches the Camera-Camcorder feature  
of your phone and takes pictures or records videos.  
Understanding Your Phone  
10  
Rear View  
Command Keys  
Power On-Off/LOCK key  
Press and hold the Power On-Off/LOCK key (  
) to turn your  
phone on or off.  
With the phone keys and touch screen locked, press and hold the  
Power On-Off/LOCK key ( ) to unlock the phone.  
Note: With the phone locked, you can still answer incoming calls by pressing  
the Talk key.  
Volume Key  
In Standby mode, press the Volume key (  
) on the left side of  
the phone Up or Down to adjust the volume of the incoming calls  
ringer.  
When receiving a call, press the Volume key Up or Down to mute the  
ringer.  
During a call, press the Volume key Up or Down to adjust the voice  
volume in the Earpiece-Speaker.  
1. Camera Lens — The lens of your built-in camera.  
2. Flash — Lets you take photos in low light conditions.  
3. Battery Cover — Protects the battery.  
When playing a music file or video clip, press the Volume key Up or  
Down to adjust the playback volume.  
4. Camera Key — Launches the Camera-Camcorder feature  
Soft Keys  
of your phone and takes pictures or records videos.  
Functions for the soft keys are defined by what appears above  
each in the display. There are four soft keys across the bottom of  
the display.  
11  
     
Send Key  
Camera Key  
The Send key (  
recall the last number(s) dialed, received, or missed.  
) is used to answer calls, dial calls, and to  
Use the Camera key on the right side of the phone to launch the  
Camera function on your phone by pressing and holding this key.  
Press  
Enter a number and briefly press  
Briefly press in Standby mode to display a list of recent calls to  
and from your phone.  
once to answer calls.  
Understanding the Display Screen  
to make a call.  
1
1. The top line of your  
5
phone’s display contains  
icons that indicate  
network status, battery  
power, signal strength,  
connection type, and  
more.  
Press  
Press  
twice in Standby mode to call the most recent number.  
to pick up a waiting call. Press  
again to switch back  
to the other call.  
2
4
Clear Key  
2. Tapping the left side of  
the display opens the  
Widget Bar that lists  
available shortcut  
widgets.  
The Clear key (  
) is used to erase or clear numbers, text, or  
symbols from the display. You can also use the key to return to a  
previous menu or to return to Standby mode from any menu.  
If you enter an incorrect character, briefly press  
(and delete) the character.  
to backspace  
3
3. The bottom line of the  
To erase the entire sentence, press and hold  
.
display shows available  
soft keys. The sample screen shows the following soft  
keys:  
To return to the previous menu level, briefly press  
.
End Key  
Briefly press  
once to disconnect a call.  
• Dialer — Launches the Dialer screen that lets you place calls.  
Press  
to return to Standby mode from any menu, or to cancel the  
• Contacts — Launches the Contacts list screen.  
last input.  
• Messaging — Launches the Messaging menu.  
Understanding Your Phone  
12  
   
• Menu — Launches the Main Menu.  
Completed  
Example: “Message Saved”  
Information  
Example: “New Message”  
Error  
4. The center portion of the display shows information such  
as call progress information, messages, and photos.  
5. Tapping the top line of the display pulls down a four-icon  
shortcut bar. To hide the four-icon shortcut bar, tap  
anywhere on the screen below the shortcut bar.  
Example: “System Error!”  
Warning  
Display Screen Icons  
Example: “Low Battery,” “Memory Full!”  
Your phone can show you definitions of the icons that appear on  
the top line of the display.  
Backlight  
The backlight illuminates the display. It goes off when the screen  
and phone keys are not pressed within a period of time set in the  
Backlight Time menu. The backlight turns on when you press a  
key.  
To access the Icon Glossary:  
In Standby mode, press Menu, then select Phone Info  
Icon Glossary. A list appears showing the icons that can  
appear on the top line of the displays.  
Note: During a phone call, the display backlight dims and turns off after 10  
seconds to conserve battery power, regardless of the Backlight Time  
setting.  
Dialogue Boxes  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Dialogue boxes and their  
definitions are outlined below.  
Choice  
Your Phone’s Modes  
Call Answer Mode  
Example: “Save Message?”  
Reconfirm  
You can choose to answer a call by pressing any key except  
Example: “Erase All Messages?”  
Performing  
Example: “Sending...” “Connecting...”  
or  
, or by pressing only the  
13  
     
To enter Lock Mode:  
Input Mode  
In Standby mode, press  
Input mode determines how you enter text, numbers, and  
symbols. While at any text entry screen, press the down arrow in  
the upper left corner of the screen, then select the input mode  
from the drop-down menu. Optional input modes are:  
on the top of the  
phone. The lock mode screen  
appears momentarily in the  
display, then the screen goes  
dark.  
3X4Keypad (phone-style touch keypad)  
QWERTY (full touch keypad — changes display to landscape mode)  
Handwriting box (divided pallet)  
To exit Lock Mode:  
While in Lock mode, press  
and hold until the  
Standby mode screen  
appears in the display.  
Handwriting full screen (undivided pallet)  
Tip: When using the 3X4Keypad mode, you can also choose between Abc  
/
ABC T9 Word, and 123 by pressing the Entry Mode soft key.  
,
Standby Mode  
Lock Mode  
Standby mode is the state of the phone once it has found service  
and is idle. The phone goes into Standby mode:  
When the phone is in Lock Mode, restrictions are placed on  
phone use. You can receive calls and messages, but cannot place  
outgoing calls (except for emergency numbers) until you unlock  
the phone. Lock Mode also restricts access to menus and the  
Volume key.  
After you power the phone on.  
When you press the End key after a call or from within a menu.  
In Standby mode, you will see the time, day, and date as well as  
all phone status icons.  
Understanding Your Phone  
14  
   
Place Calls in Standby Mode  
from the display and the desired ringer value appears.  
1. In Standby mode, enter a phone number, and press  
Vibrate Mode  
to place a call.  
In Standby mode, repeatedly press the Volume key  
) down until “Vibrate only” appears in the display.  
2. Press  
to return to Standby mode.  
(
Receive Messages in Standby Mode  
Note: The Volume key is on the left side of phone.  
While your phone is in Standby mode, new incoming messages  
automatically appear in the screen as they are received. Use the  
Navigation key to scroll through text or to view complete images.  
Adjust the Ringer  
To adjust the Ringer volume, while in Standby mode, press the  
Volume key up or down.  
Talk Mode  
You can place and receive calls only when your phone is on.  
While in a call, your phone is in talk mode. Press the Clear key to  
display a list of menu options. (For more information, refer to  
1. In Standby mode, press the Volume key up or down to set  
the call ringer volume as desired.  
Options are:  
• Silence All  
• Alarm only  
• Vibrate only  
• 1 Beep  
• Low/Medium  
• Medium  
• Medium/High  
• High  
Enter/Exit Silent Mode  
Silences the ringers, the alerts, and the tones your keypad makes  
when you press a key.  
• Low  
To enter Silent Mode:  
2. When you are satisfied with the setting. Your phone returns  
In Standby mode, repeatedly press the Volume key  
) Down until “Silence All” appears in the display.  
to Standby mode.  
(
Note: The Vibrate icon ( ) appears in the display when the phone is in  
To exit Silent Mode:  
Vibrate mode. The No Ring icon (  
) appears in the display when the  
While in Silent mode and Standby mode, repeatedly press  
the Volume key ( ) Up until “Silence All” disappears  
phone is in Silence All mode.  
15  
   
In Standby mode, press the Menu soft key, then select Camera  
In Standby mode, press the Menu soft key, then select Multimedia  
Camera  
In Camcorder mode, select  
.
Music Player Mode  
The Music Player in your phone can play music files (MP3, CMX,  
Midi, AAC, AAC+, and eAAC+), but only if they are stored in the  
My Music folder on an optional microSD Memory Card.  
.
.
Exiting Camera Mode — Press  
.
Camcorder Mode  
Camcorder mode lets you record videos with your phone’s  
camera. In Camcorder mode, you can also adjust the resolution  
and appearance of your videos.  
Entering Music Player Mode:  
In Standby mode, display the shortcut menu by selecting the status bar  
at the top of the display, then select (  
– or –  
).  
In Standby mode, press the Menu soft key, then select Music Player  
.
Entering Camcorder Mode:  
In Standby mode, press and hold the Camera key (  
right side of the phone — then, select  
In Standby mode, press the Menu soft key, then select Multimedia  
Camcorder  
In Camera mode, press  
) — on the  
.
Exiting Music Player Mode — Press  
.
Camera Mode  
.
.
Camera mode lets you take pictures with your phone’s camera.  
In Camera mode, you can also adjust the resolution and  
appearance of your pictures.  
Exiting Camcorder Mode — Press the  
key.  
Video Player Mode  
The Video Player in your phone can play video files [3GS, MP4,  
H.263, and H.264 (Decoding: QCIF Only)], but only if they are  
stored in the My Video folder in the phone or on an optional  
microSD Memory Card.  
Entering Camera Mode:  
In Standby mode, press and hold the Camera key (  
) — on the  
right side of the phone.  
Understanding Your Phone  
16  
     
Entering Video Player Mode:  
1. In Standby mode, press Menu, then select Multimedia  
My Videos  
.
– or –  
In camcorder mode, press  
.
The Videos screen appears containg a list of videos with  
thumbnail images appears in the display.  
2. Select the desired video. The Video Player screen appears  
in the display and begins playing the highlighted video.  
17  
Section 3: Call Functions  
This section explains how to make or answer a call. This section  
also includes the features and functionality associated with  
making or answering a call.  
keypad screen appears in the display.  
2. Enter 911 using the touch keypad.  
3. Press  
or the Voice Call soft key to place the call.  
Making a Call — Number  
Entry Dialing  
1. With the phone on, press the  
Dialer soft key. The touch  
keypad screen appears in the  
display.  
Important!: Emergency number 911 is preset into your phone.  
If you call 911 an audible tone is heard and an Emergency  
prompt appears in the display for the duration of the call.  
Important!: Because of various transmission methods, network parameters,  
and user settings necessary to complete a call from your  
wireless phone, a connection cannot always be guaranteed.  
Therefore, emergency calling may not be available on all  
wireless networks at all times.  
2. Enter the number you wish to  
call using the touch keypad.  
3. Press  
or the Voice Call  
soft key to place the call.  
Important!: DO NOT depend on this phone as a primary method of calling  
Dialing Emergency Numbers  
911 or for any other essential or emergency communications.  
When you call an Emergency  
Number, such as 911, your phone  
Note: You can specify other numbers than 911 as emergency numbers using  
locks itself in emergency mode, only allowing you to make calls  
to the emergency call center you originally contacted. This  
enables emergency operators to more easily dispatch aid, such  
as police, fire fighting, and emergency medical personnel.  
Manual Pause Calling  
When you call automated systems (like banking services), you  
are often required to enter a password or account number.  
1. With the phone on, press the Dialer soft key. The touch  
Call Functions  
18  
           
Instead of manually entering the numbers each time, you can  
store the numbers in your Contacts along with special characters  
called pauses.  
Making a Call — Speed Dialing  
You can store phone numbers and contact names in your phone’s  
Contacts list. Speed Dialing lets you quickly and easily dial any  
contact in your Contacts list by using that contact’s Favorites  
number in the list. You can assign and change Favorites (speed  
dial) numbers for your contacts. (For more information, refer to  
W Pause — A hard pause stops the calling sequence until you press  
.
P Pause — A two-second pause stops the calling sequence for two  
seconds and then automatically sends the remaining digits.  
To manually call a number with pause(s) without storing it to your  
Contacts:  
One-Touch Dialing  
Speed Dial numbers 002 through 009 are special One-Touch  
dialing numbers. You can call the phone numbers stored in your  
phone’s Contacts list and assigned Speed Dial numbers 002  
through 009 by pressing and holding a single key.  
1. With the phone on, press the Dialer soft key. The touch  
keypad screen appears in the display.  
2. Enter the number you wish to call.  
3. Press the Add Pause soft key.  
A pop-up menu containing the following options appears in  
the display:  
Example: For Speed Dial number 003, press the Dialer soft key, then press  
and hold  
until the name and number appear in the display  
and the number is dialed.  
Wait — a hard pause (awaits input from you).  
Two-Touch Dialing  
2-Sec Pause — a two-second pause.  
Memory locations 010 through 030 are special Two-Touch  
dialing locations.  
Tip: You can create pauses longer than two seconds by entering multiple P  
Pauses.  
Example: For Speed Dial number 013, briefly press  
, then press and  
hold  
until the name and number appear in the display and  
4. Select the desired pause option. The respective letter (W or  
the number is dialed.  
P) is added to your number entry.  
5. Press  
or the Voice Call soft key to call the number.  
19  
         
Pause Dialing From a Contacts Entry  
When saying a name, say the first name then the last name.  
If you speed dial a contact that contains two-second (P) pause(s)  
simply wait for the pauses to pass and the dialing to complete.  
Dialing a Name  
To dial a name, do the following:  
If you speed dial a contact that contains hard (W) pauses, wait for the  
appropriate prompt(s) from the number you are calling (credit card  
1. In Standby mode, press the Voice Recognition key (  
Say a Command” appears in the display and is  
pronounced through the earpiece.  
).  
number, bank account number, and so on) and press  
your dialing sequence.  
to continue  
2. Say, “Call”. You are prompted to “Say the name or  
Note: For more information about dialing pauses, refer to “Manual Pause  
number...”.  
3. Speak clearly and say the name of a person in your  
Making a Call — Voice Dialing  
Contacts list, first name followed by last name.  
Your R850 mobile phone includes state-of-the-art voice  
recognition software that lets you dial numbers using your voice.  
Voice Dial displays a choice list of up to three names and  
prompts you with “Did you say?” followed by the first  
name on the list.  
Using Voice Dial  
Use the Voice Dial command to dial any number stored in your  
Contacts list by saying the name of the contact (Name Dialing).  
You can also use Voice Dial to dial any valid telephone number,  
even numbers not stored in your contact list, by speaking the  
individual digits in the number (Digit Dialing).  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
Press  
to exit Voice Service without dialing.  
Voice Dialing Tips:  
If the recognized name has multiple numbers stored for it  
(that is, Home, Work, Mobile, and so on), Voice Dial  
displays the possible choices and prompts you with  
Which location?”  
Wait for the beep before speaking.  
Speak clearly at a normal volume, as if you were talking to someone  
on the phone.  
Call Functions  
20  
     
5. Say one of the following number types:  
Mobile  
Home  
Work  
Fax  
Press  
to exit Voice Service without dialing.  
Pause Dialing From a Contacts Entry  
If you voice dial a contact that contains 2-sec (P) Pauses(s), wait for  
the appropriate prompt(s) from the number you are calling (credit card  
number, bank account number, and so on) and enter the appropriate  
response(s).  
Voice Dial dials the specified number.  
Dialing a Number  
To dial a number using Voice Dial, do the following:  
1. In Standby mode, press the Voice Recognition key (  
Say a Command” appears in the display and is  
pronounced through the speaker.  
If you voice dial a contact that contains hard (W) Pause(s), simply wait  
for the pauses to pass and the dialing to complete.  
).  
Answering a Call  
Your phone notifies you of a call in the following ways:  
2. Say “Call”. VoiceSignal prompts you to “Say the name or  
A ring tone sounds and/or your phone vibrates (Your phone provides  
eight ring volume settings including: Silence All Alarm only Vibrate  
only 1 Beep Low Low/Medium Medium Medium/High, or  
#”.  
,
,
,
,
,
,
,
3. Speak clearly and say the telephone number of the person  
High, and/or different ring types to distinguish callers.)  
you want to call. For example, say “7 8 1 9 7 0 5 2 0 0."  
A phone number (unless blocked by the caller) and a name appear in  
the display (If the caller’s number and name are stored in your  
Contacts list).  
Voice Dial displays a choice list of up to three numbers and  
prompts you with “Did you say?” followed by the first  
number on the list.  
If the caller can’t be identified, Call from unavailable #  
,
Call from  
restricted number, or no number appears in the display.  
Your phone continues to notify you of the call until one of the following  
events occurs:  
4. Say “Yes” to confirm the number or “No” to hear the next  
one, or use the keypad to select the correct number from  
the list.  
21  
   
You answer the call.  
You ignore the call.  
The calling party ends the call.  
The call is sent to voicemail.  
Review the Calls Log  
1. In Standby mode, press the  
Menu soft key, then select  
Calls. The Calls list appears  
in the display showing All  
calls.  
Answering an Incoming Call  
Press the  
key. The ring tone and/or vibration stop and  
2. Select the Down arrow in the  
upper right corner of the  
screen. The following Calls  
log options appear in a drop-  
down menu:  
the caller’s voice can be heard in the earpiece.  
Tip: You can set your phone to answer calls automatically or when you press  
any key but  
page 113.)  
Ignoring a Call  
When you ignore an incoming call, the call is immediately  
forwarded to your voice mail.  
All  
Incoming  
Outgoing  
Missed  
Data  
Adjusting the Call Volume  
In Standby mode, repeatedly press the Volume key Down  
until the Call Volume Level desired appears in the display.  
The Volume key is on the left side of phone.  
Note: To review your device’s Call Timers or Data Counters, press the Call  
Timer soft key or the Data Counter soft key.  
Calls Log  
3. Select the Calls log that you wish to review or the function  
The Calls log retains information about Outgoing, Incoming, and  
Missed calls. You can also view times for your last call and the  
total times for all calls.  
you wish to access.  
Call Functions  
22  
         
4. The call information screen  
Note: In cases where a Calls log entry concerns a call to or from a Contacts  
entry, the Contact name associated with the number appears in the  
Calls log list instead of the number.  
offers the following options:  
— Press to dial this  
number.  
Outgoing Calls  
— Press to send a  
Text, Picture, or Video message  
to this number. (For more  
information, refer to “Creating  
Your phone retains information about the last 90 outgoing calls  
and stores them in the Outgoing calls log. You can review the  
Outgoing calls log for the time and date of a call, as well as other  
information.  
To add the number to your  
Contacts list, press the Add To  
Contacts soft key.  
Note: In Standby mode, you can quickly view your most recent calls of all  
types by briefly pressing  
. A list containing up to 270 of your most  
recent outgoing, incoming, and missed calls appears in the display.  
Contacts only — To view  
Contact information for this call,  
press the View details soft key.  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
To delete the selected call from your Outgoing calls log, press the  
Erase soft key.  
2. Select the Down arrow in the upper right corner of the  
screen, then select Outgoing. A list of Outgoing Calls  
appears in the display.  
To block / permit deletion of the selected call, press the More soft  
key, then select Lock  
.
To copy this number to the Dialer screen so that you can make  
changes (such as, to add Pauses) before reuse, press the More  
soft key, then select Copy to dialer  
3. Select a call to view further information about it. The call  
information screen shows the recipient’s name (Contacts  
only), the number dialed, the time and date the call was  
made, and the duration of the call.  
.
5. To review another Outgoing call, press the Left and Right  
arrow keys at the top of the screen.  
23  
Incoming Calls  
— Press to send a Text, Picture, or Video message to this  
Your phone retains information about the last 90 Incoming calls  
and stores them in the Incoming calls log. You can review the  
Incoming calls log for the time and date of the call, as well as  
other information.  
To add the number to your Contacts list, press the Add To Contacts  
soft key.  
Contacts only — To view Contact information for this call, press the  
View details soft key.  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
To delete the selected call from your Incoming calls log, press the  
Erase soft key.  
2. Select the Down arrow in the upper right corner of the  
screen, then select Incoming. A list of Incoming Calls  
appears in the display.  
To block / permit deletion of the selected call, press the More soft  
key, then select Lock  
.
To copy this number to the Dialer screen so that you can make  
changes (such as, to add Pauses) before reuse, press the More  
3. Select a call to view further  
information about it. The call  
information screen shows the  
caller’s name (Contacts only),  
the number called received  
from, the time and date the  
call was received, and the  
duration of the call.  
soft key, then select Copy to dialer  
.
5. To review another Incoming call, press the Left and Right  
arrow keys at the top of the screen.  
Missed Calls  
Your phone retains information about the last 90 missed calls  
(calls that were never picked up) and stores them in the Missed  
calls log. You can review the Missed calls log for the time and  
date of the call, as well as other information.  
4. The call information screen  
offers the following options:  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
— Press to dial this  
number.  
Call Functions  
24  
2. Select the Down arrow in the upper right corner of the  
screen, then select Missed. A list of Missed Calls appears  
in the display.  
To block / permit deletion of the selected call, press the More soft  
key, then select Lock  
.
To copy this number to the Dialer screen so that you can make  
changes (such as, to add Pauses) before reuse, press the More  
3. Select a call to view further  
information about it. The call  
information screen shows the  
caller’s name (Contacts only),  
the number called received  
from, the time and date the  
call was received, and the  
duration of the call.  
soft key, then select Copy to dialer  
.
5. To review another Incoming call, press the Left and Right  
arrow keys at the top of the screen.  
All Calls  
You can review all of the calls log entries (outgoing, incoming,  
and missed calls) for the time and date of a call, as well as other  
information.  
4. The call information screen  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
offers the following options:  
— Press to dial this  
number.  
2. Select a call to view further information about it. The call  
information screen shows the caller’s name (Contacts  
only), the number called (by), the time and date the call  
was made / received, and the duration of the call.  
— Press to send a  
Text, Picture, or Video message  
3. The call information screen offers the following options:  
To add the number to your Contacts list, press the Add To Contacts  
soft key.  
— Press to dial this number.  
Contacts only — To view Contact information for this call, press the  
View details soft key.  
— Press to send a Text, Picture, or Video message to this  
To delete the selected call from your Missed calls log, press the  
Erase soft key.  
25  
To add the number to your Contacts list, press the Add To Contacts  
Last Call — View the duration of your last call.  
soft key.  
Outgoing Calls — View the duration of the total outgoing calls  
made on your phone since all timers were last reset.  
Contacts only — To view Contact information for this call, press the  
View details soft key.  
Incoming Calls — View the duration of the total incoming calls  
received on your phone since all timers were last reset.  
To delete the selected call from your Calls log, press the Erase soft  
key.  
Roaming Calls — View the total calls duration on your phone  
while roaming since all timers were last reset.  
To block / permit deletion of the selected call, press the More soft  
key, then select Lock  
.
All Calls — View the duration of the total call, incoming, outgoing,  
and data calls made on your phone since all timers were last reset.  
To copy this number to the Dialer screen so that you can make  
changes (such as, to add Pauses) before reuse, press the More  
Last Reset — View the time and date all timers were last reset.  
soft key, then select Copy to dialer  
.
Lifetime Calls — View the number and total duration of all calls  
since your phone was activated.  
4. To review another call, press the Left and Right arrow keys  
at the top of the screen.  
3. Press the Reset soft key to reset all counters except  
Call Timer  
Lifetime Calls.  
View the duration of your last call, total calls, and calls made  
during the life cycle of you phone using the Call Timer feature.  
Note: Although Total Calls timers can be erased, the Lifetime Calls timer can  
never be erased.  
Note: Call Timer is not for billing purposes.  
Data Counter  
View the amount of Transmit data, Receive data, and Total data  
transmitted or received since the last time you reset the data  
counters, and the Lifetime amount of data transmitted or  
received.  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
2. Press the Call Timer soft key.  
The following options appear in the display:  
Note: Data Counter is not for billing purposes.  
Call Functions  
26  
1. In Standby mode, press the Menu soft key, then select  
Calls. The Calls list appears in the display showing All  
calls.  
appears in the top line of the display when Roaming is active,  
and extra charges may apply when making or receiving calls.  
Note: Some features may be unavailable while roaming. Roaming also  
consumes additional power from the battery requiring more frequent  
recharging. Contact your Wireless Provider for more information about  
Roaming.  
2. Press the Data Counter soft key The following options  
appear in the display:  
Transmitted — View the total amount of data transmitted by your  
phone since the last reset.  
How Roaming Works  
Received — View the total amount of data received by your phone  
since the last reset.  
Roam Option lets you set roaming preferences if you move in and  
out of your home network. The following roaming options are  
available:  
Total — View the total amount of data sent or received by your  
phone since the last reset.  
Home Only — Your phone is available for normal operation only in the  
designated coverage area.  
Last Reset — View the time and date all timers were last reset.  
Lifetime Data Counter — View the total amount of data sent or  
received by your phone since activation (Lifetime Data Counter  
cannot be reset).  
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of  
networks is used to acquire service. If no preferred networks are  
found, any digital system is acquired.  
3. Press the Reset soft key to reset all counters except  
Lifetime Data Counter.  
Note: Although Total data counters can be erased, the Lifetime Data Counter  
can never be erased.  
Roaming  
What is Roaming?  
Roaming lets you use your phone when you travel outside of your  
Wireless Provider’s coverage area. The Roaming icon (  
)
27  
   
Section 4: Menu Navigation  
This section explains the menu navigation for your phone. It also  
describes the menus available with your phone.  
Rearranging Main Menu Shortcut Icons  
Pages easyedge and Settings and  
Multimedia of the Main Menu  
Menu Navigation  
contain shortcut icons that launch  
particular features and functions of  
phone without drilling down through  
multiple layers of menus.  
Access menus using the Menu soft  
key, other soft keys, or icons on the  
Widget Bar or Shortcut Bar.  
1. In Standby mode, press the  
Menu soft key. The Main  
You can rearrange the icons on  
Pages easyedge and Settings and  
Multimedia to suit your needs and  
preferences.  
Menu page (the first of three  
pages) appears in the display.  
2. If needed, select either the  
Main Menu, the easyedge, or  
the Settings and Multimedia  
page by pressing and  
1. In Standby mode, press the  
Menu soft key. The Main  
Menu appears in the display.  
dragging the current page left  
or right to display each  
succeeding page.  
2. Select easyedge and Settings and Multimedia by pressing  
and dragging the current Main Menu page left or right to  
display the desired page.  
3. Select icons or menu options to access a menu or sub-  
3. Unlock the selected Main Menu page by pressing the Icon  
menu shown in the display.  
Lock button (  
) (upper right hand corner of the screen).  
Menu Navigation  
28  
   
4. To reposition an icon on the  
page, press and drag the icon  
to its new position. All other  
icons to the right of, and  
below, this position  
Widget Bar Shortcuts  
1. In Standby mode, press the  
right arrow tab on the left  
edge of the display. The  
Widget Bar slides open to the  
right and lists icons for those  
Widgets selected in the  
automatically shift their own  
positions in sequence.  
5. To save your change(s), press  
Widget settings. (For more  
the Save soft key.  
To discard your change(s),  
2. Scroll through the Widget list  
by pressing and sliding within  
the Widget Bar until a desired  
Widget icon appears.  
press  
.
Return to the Previous Menu  
Press  
to return to the previous menu.  
3. If needed, select one of the three Standby screen pages to  
receive the Widget icon by pressing and dragging the  
current Standby screen left or right to display each page.  
Using Widgets  
Widgets are special icons that you can use to launch particular  
phone features and functions or to quickly access particular  
Internet addresses. You can initially access the widgets on your  
phone by displaying the Widget Bar.  
4. Press, hold, and slide the Widget icon to the right until it is  
free of the Widget Bar. The icon now displays on the  
Standby screen and expands in size.  
Widget Bar  
Note: You can position a Widget icon as needed by pressing, holding, and  
The Widget Bar is an easily accessed list of widgets that acts like  
a menu or storage bay for your widgets.  
sliding it.  
29  
       
5. Select a Widget icon on the standby screen to launch its  
In Standby mode, press the icon bar at the top of the  
display. The Shortcut Bar opens downward and lists icons  
for the following menu options:  
function.  
Note: You can return a Widget icon to the Widget Bar simply by pressing,  
• Send Text Message — Opens the Text Msg screen, letting you  
compose and send a Text Message. (For more information, refer to  
holding, and sliding the icon until it overlaps the Widget Bar.  
6. Close the Widget Bar by pressing the left arrow tab.  
• Memo Pad — Opens the Memo screen listing any existing  
page 97.)  
Returning Widgets to the Widget Bar  
1. In Standby mode, press the right arrow tab on the left edge  
of the display. The Widget Bar slides open to the right and  
lists icons for those Widgets selected in the Widget settings  
• Music Player — Launches the Music Player. (For more  
• Bluetooth — Opens the Bluetooth screen listing any registered  
page 92.)  
2. To return a single Widget to the Widget bar:  
If needed, select one of the three Main Menu pages by pressing  
and dragging the current Main Menu page left or right to display  
each page.  
The In-Use Options  
Access numerous menus and features even while in a call.  
Press and drag the Widget icon back to the Widget bar.  
Note: If the call is disconnected while accessing the In-Use Option, the In-  
Use Option disappears from the display and the phone eventually  
returns to Standby mode.  
3. To return all Widgets to the Widget bar, simply rock the  
handset back and forth until all Widget icons reappear in  
the Widget bar.  
1. While in a call, press the Clear key (  
). The following  
Using the Shortcuts Bar  
menu items appear in the display:  
• Speaker on — Enables Speakerphone mode to share the call with  
others nearby.  
The Shortcut Bar is an easily accessed list of icons that let you  
directly access key options on your phone.  
Menu Navigation  
30  
       
• Switch to headset — Connects a Bluetooth device, such as a  
headset, in place of the phone’s earpiece and microphone.  
• Mute — Blocks sound going to the other party(ies) on the call.  
• Memo — Create and save a memo.  
• Messages — The Messaging menu appears in the display. (For  
• End Call Tap to end the current call.  
• Dialer — Allows you to dial another party, which the first call is put  
on hold.  
• Contacts — The Contacts Find screen appears in the display.  
• Add To Contacts — When the Contacts screen appears in the  
display, you can add a new Contact.  
• Send DTMF — Send your phone number as tones (if you’re the  
recipient of the call). Send the recipient’s phone number as tones (if  
you’re the originator of the call).  
2. Press the  
key to exit the menu.  
31  
Section 5: Understanding Your Contacts  
This section explains how to manage your daily contacts by  
storing their name and number in your Contacts. Contacts entries  
can be sorted by name.  
2. To find a Contact, select the Search field. The 3X4 Keypad  
screen appears in the display.  
Enter the first few letters of the Contact’s name. A list of Contacts  
with names matching the letters you entered appears below the  
Search field.  
Your Contacts List  
Your Contacts list can store up to 2000 entries, with each contact  
having up to five associated phone numbers, an Email address,  
and a picture ID.  
Select the desired Contact to display the Contacts list, then select  
again for the Contact details.  
Adding a New Contacts Entry  
You can add an entirely new entry to your Contacts list or add  
information to an existing entry.  
Each phone number can be up to 32 digits in length, including  
hard pauses. Contact names can be up to 32 characters in  
length. You can also specify a memory location for each entry,  
and you can restrict access to the Contacts list to prevent  
unauthorized use.  
Using the Contacts Add Option  
1. In Standby mode, press the Contacts soft key. The Contacts  
screen appears in the display.  
Tip: One-Touch, Two-Touch, and Three-Touch Dialing allow you to call  
numbers stored in your Contacts list faster. (See page 19.)  
Note: In Standby mode, press the Menu soft key and select Contacts  
.
Open Your Contacts List  
1. In Standby mode, press the Contacts soft key. The Contacts  
2. Press the New Contact soft key. The New Contact screen  
appears in the display.  
screen appears in the display.  
Note: In Standby mode, press the Menu soft key and select Contacts  
.
Understanding Your Contacts  
32  
           
3. Select the Name field. The  
3X4 Keypad text entry screen  
appears in the display.  
7. If desired, assign the new  
Contact to a Group. This lets  
you send messages to and  
find this Contact and other  
related contacts. (For more  
If desired, select another text  
entry screen. (For more  
information, refer to “Changing  
Select the General field. The  
Select Group field appears in the  
display. The following groups are  
available:  
4. Enter a name or phrase to  
associate with the new  
New group  
Family  
5. Select a phone number field  
Friends  
(
Mobile  
,
Mobile 2, Home, Work, or Fax) or the Email address  
Colleague  
Business  
(Email) field. The 3X4 Keypad text entry screen appears in  
the display.  
Select the preferred group. A message pops-up confirming the  
group assignment for this Contact.  
If desired, select another text entry screen. (For more information,  
8. If desired, select a unique Ringtone or voice memo file to  
6. Enter a number or address for the new Contact. (For more  
9. If desired, enter an additional phone number (Mobile 2  
Home Work, or Fax) or Email address (Email) for the new  
Contacts entry.  
,
,
33  
10. If desired, select an identifying image selecting the photo  
ID field. You are given the option to take a photo or to use a  
Creating a new Contacts entry:  
3. Select Add New Contacts. The New Contact screen appears  
in the display with the number you’re saving populating  
the Mobile field.  
11. To save the new Contacts entry, press the Save soft key.  
4. To save the number as other than the first Mobile number,  
press the Number Type Change button (  
(number type) icons appear in the display:  
) The following  
Saving a Number from a Call  
Once you’ve finished a call, you can save the number of the  
caller to your Contacts list.  
Mobile  
Fax  
Home  
Work  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
1. After you press  
to end your call, the call time, length  
5. Select the number type that matches your new entry. The  
New Contact screen appears in the display with the  
number being save populating the selected number type  
field. (For more information on creating a new Contacts  
of call, phone number, and name of the other party (if  
available) appear in the display.  
2. Press the Add to Contacts soft key. The Add To Contacts  
screen appears in the display showing the following  
options:  
• Add New Contacts — Lets you create a new Contacts entry.  
• Update existing — Lets you add the number or Email address you  
just entered to an existing Contacts entry.  
Tip: You can also store a phone number from Standby mode by entering the  
number, and pressing the Save soft key.  
Understanding Your Contacts  
34  
 
Adding the number to an existing Contacts entry:  
10. Make any added changes you wish to the Contacts entry.  
6. Select Update existing. The  
Contacts screen appears in  
the display showing your  
current Contacts list.  
11. To save the Contacts entry, press the Save soft key.  
Storing Number from a Calls Log  
7. Select the Search field and  
enter the first few characters  
of the Contacts entry name  
under which you will store the  
saved number. (For more  
information on finding a  
Contacts entry, see “Using  
You can store numbers from the  
Calls logs to your Contacts.  
1. In Standby mode, press the  
Menu soft key, then select  
Calls. The Calls list appears  
in the display showing All  
calls.  
2. Select the Down arrow in the  
upper right corner of the  
screen. The following Calls  
log options appear in a drop-  
down menu:  
8. Select the desired Contacts  
entry. The following (number type) icons appear in the  
Update existing screen:  
All  
Mobile  
Fax  
Home  
Work  
Incoming  
Outgoing  
Missed  
Data  
9. Select the appropriate unassigned number type. The  
Contact screen appears in the display.  
3. Select the Calls log that you wish to review.  
35  
4. Select the number you wish to store in your Contacts list.  
The associated Call Information screen appears in the  
display.  
Say a Command” appears in the display and is  
pronounced through the speaker.  
2. Say “Look up”.  
5. Press the Add To Contacts soft key. The Add To Contacts  
screen appears in the display showing the following  
options:  
VoiceSignal prompts you to “Say the name.”  
3. Speak clearly and say the full name of the person you want  
to call, exactly as it is entered in your contact list.  
• Add New Contacts — Lets you create a new Contacts entry.  
If VoiceSignal does not recognize the name you said, a  
choice list of up to three names appears in the display, and  
VoiceSignal prompts you with “Did you say look up” followed  
by the first name on the list.  
• Update Existing — Lets you add the selected number to an  
existing Contacts entry.  
For more information on saving the number, see “Saving a  
4. Say “Yes” to confirm the name or “No” to hear the next  
name, or use the keypad to select the correct name from  
Finding a Contacts Entry  
Voice Method  
Use the VoiceSignal Contacts command to view contact  
information for any named contact stored in your Contacts list by  
saying the name.  
To say the name again, press the Yes soft key in the “Try again?”  
screen.  
To exit VoiceSignal without dialing, press  
.
Note: The Contacts command shows the requested contact information in  
5. The contact information for the name you selected appears  
the display but does not dial any phone numbers for the contact.  
in the display.  
Keypad Methods  
To look up information for a specific contact:  
Find by Name  
1. In Standby mode, press the Voice Recognition key  
(
).  
If you have stored a named contact in your Contacts list, Find lets  
you locate the entry quickly.  
Understanding Your Contacts  
36  
       
1. In Standby mode, press the Menu soft key and select  
Contacts. The Contacts screen appears in the display with  
an alphabetical list of Contacts showing.  
2. Press the Down arrow button at the top right corner of the  
screen. The Groups screen appears in the display.  
3. Select the group you wish to browse. The selected Group  
2. Select the Search field and enter the first few characters of  
list appears in the display.  
the name of the contact as it appears in your Contacts list.  
4. Highlight the desired Contacts entry, then do one of the  
following:  
Example: If you saved a contact name as “Amy Smith”, begin your search for  
that contact by pressing  
for “A”.  
To delete the selected contact from the Group, press the Remove  
member soft key. (Does not apply to the General group.)  
To add an existing contact entry to the selected Group, press the  
Add member soft key.  
Note: As you enter letters, the entry names of the closest matches (thus far)  
appear in the display.  
To change the name of the Group, press the Rename soft key.  
3. When the desired Contacts entry is listed in the display,  
To delete the Group, press the Erase soft key.  
select it. Then, do one of the following  
5. Select the desired option to enter that option’s sub-menu.  
To dial the number associated with the named Contact, tap the  
entry, then select Voice Calls  
Editing an Existing Contact Entry  
.
Once stored in the Contacts, an entry can be changed quite  
easily.  
To change the information about the contact, press the Edit soft  
key.  
Group  
1. Find the desired entry in the Contacts list. (For more  
This option lets you find a Contacts list entry with a specific  
Group name.  
2. Press the Edit soft key. The Edit Contact screen appears in  
1. In Standby mode, press the Menu soft key and select  
Contacts. The Contacts screen appears in the display with  
an alphabetical list of Contacts showing.  
the display with the contact name highlighted.  
3. Highlight a number stored in this contact entry.  
4. To backspace and delete numbers, press  
.
37  
     
5. To clear all numbers in the highlighted field, press and hold  
2. Press the Add Pause soft key.  
.
The following menu options appear in the display:  
6. When you’re finished editing the entry, press the Done soft  
Wait — a hard pause (awaits input from you).  
key, then press the Save soft key.  
2-Sec Pause — a two-second pause.  
Adding Pauses to Contacts Numbers  
3. Select the pause option of your choice to enter the  
highlighted pause into your number sequence.  
When you call automated systems (like banking services), you  
are often required to enter a password or account number.  
Instead of manually entering the numbers each time, you can  
store the numbers in your Contacts along with special characters  
called pauses.  
4. Press the Add To Contacts soft key. The Add To Contacts  
screen appears in the display showing the following  
options:  
• Add New Contacts — Lets you create a new Contacts entry.  
Wait — A hard pause stops the calling sequence until further input  
from you.  
• Update Existing — Lets you add the selected number to an  
existing Contacts entry.  
2-Sec Pause — A two-second pause stops the calling sequence for  
two seconds and then automatically sends the remaining digits.  
For more information on saving the number, see “Saving a  
Add Pauses to an Existing Contacts Entry  
Tip: You can enter multiple two-second pauses to extend the length of a  
pause. For example, two consecutive two-second pauses cause a total  
pause time of four seconds.  
1. Find the desired entry in the Contacts list. (For more  
Note: Keep in mind that pauses count as digits towards the 32-digit  
2. Tap the Edit soft key. The Edit Contact screen appears in  
maximum.  
the display with the contact name highlighted.  
3. Highlight a number stored in this contact entry.  
Store Pauses in a New Contacts Entry  
4. Press the Add Pause soft key. The following menu options  
1. In Standby mode, tap Dialer and enter the number you  
appear in the display:  
wish to store (such as your bank’s teleservice number).  
Understanding Your Contacts  
38  
 
Wait — a hard pause (awaits input from you).  
2. Tap the Edit soft key. The Edit Contact screen appears in  
the display with the contact name highlighted.  
2-Sec Pause — a two-second pause.  
3. Highlight the Email field (labeled with the @ symbol).  
5. Select the pause option of your choice to enter the  
highlighted pause into your number sequence.  
4. Use the keypad to edit the Email address. (For more  
6. When you’re finished entering pauses, tap Done  
Save to  
To insert the @ symbol, tap the  
the @ from the options.  
1
key or tap Symbols and select  
save your changes to the number in your Contacts list.  
Add a Number or Email Address to an Existing Entry  
Enter the remainder of the Email address using the keypad. (For more  
1. Find the desired entry in the Contacts list. (For more  
To add the domain type to the end of the Email address, do the  
following:  
2. Tap the Edit soft key. The Edit Contact screen appears in  
Tap the Shortcuts soft key. A pop-up menu appears in the display.  
the display with the contact name highlighted.  
Select the desired domain type (such as, .com, .net, .org .gov) to add to  
the Email address.  
3. Highlight a number field or the Email field in this Contacts  
entry.  
5. Tap Done  
Save to save your changes.  
4. Enter the phone number or Email address for the new  
Contacts entry.  
5. Tap Done to add the number or Email address to the  
existing entry.  
Edit an Existing Email Address  
1. Find the desired entry in the Contacts list. (For more  
39  
4. Tap the Add soft key. You are  
returned to the Favorites  
screen with the newly assigned  
Contact showing.  
Speed Dial Numbers  
You can assign and change Speed  
Dial numbers for Contacts entries.  
Assigning a Speed Dial Number  
1. In Standby mode, tap the Dialer  
soft key, then tap the Favorites  
button (  
). The Favorites list  
appears in the display.  
Changing Speed Dial Numbers  
2. Select a Speed Dial number.  
The Contacts screen appears in  
the display.  
Use this option to change a speed dial number in your Contacts  
list.  
1. In Standby mode, tap the Dialer soft key and tap  
. The  
3. Find and select a Contact entry.  
page 36.) A dot appears in the  
selected Contact’s check  
circle.  
Favorites screen appears.  
2. Tap Change Order and drag the Contact to the desired  
speed dial number.  
Understanding Your Contacts  
40  
     
Removing Speed Dial Numbers  
1. In Standby mode, press the Menu soft key and select  
Contacts. The Contacts screen appears in the display with  
an alphabetical list of Contacts showing.  
Use this option to remove a speed  
dial number in your Contacts list.  
2. Press the Down arrow button at the top right corner of the  
screen. The Groups screen appears in the display.  
• General  
1. In Standby mode, press the  
Dialer soft key and tap  
The Favorites screen appears.  
.
• Family  
2. Tap Remove, then tap the  
• Friends  
Contact Remove button (  
),  
then tap Remove again.  
• Colleague  
• Business  
3. Press the Rename soft key.  
4. Select the Group (other than No Group) that you want to  
Renaming a Contacts  
Group  
Use this option to rename a Group in your Contacts list.  
rename, then press the Rename soft key.  
5. The Rename Group text entry screen appears in the display.  
The current name of the selected Group populates the text  
field.  
6. Enter a new Group name using the keypad. (For more  
7. Press the Save soft key to save the changed group name.  
Deleting a Contacts Entry  
1. Find the desired entry in the Contacts list. (For more  
41  
     
2. Tap the Erase soft key.  
5. Tap Yes. Your phone automatically connects with the other  
device and sends the selected Contact entries.  
3. Do one of the following:  
From the list of Contacts, tap Erase, then tap the erase icon to the  
right of the contact you wish to delete, then tap Erase again.  
Note: For information on turning off the Bluetooth connection, see  
From a specific Contact, tap Erase  
.
The phone prompts you to  
Memory Status  
confirm the deletion.  
Sending a Contacts Entry  
Use the Send Name Card option to send one or more selected  
Contacts entries to another, compatible phone or other device  
over a Bluetooth connection.  
Use the Memory sub-menu to view the amount of Contacts  
entries you have stored, as well as the remaining memory.  
1. In Standby mode, press the Menu soft key and select  
Contacts. The Contacts screen appears in the display.  
2. Press the More soft key, then select Memory status. The  
amounts of memory used and remaining for Contacts  
entries appear in the display.  
1. Find and highlight the desired entry in the Contacts list.  
2. Tap the Send Name Card soft key. The Select to send screen  
appears in the display.  
3. Select a Contact and press the Send soft key. A list of  
Bluetooth-trusted devices appear in the display, showing  
only devices that can receive a name card.  
4. Select the receiving device by pressing and dragging it  
onto the Bluetooth search icon in the center of the display.  
When you have finished, the receiving device prompts you  
to connect to the sending device.  
Understanding Your Contacts  
42  
     
Section 6: Entering Text  
This section details how to select the type of text entry screen  
(phone-style touch keypad, QWERTY touch keypad, or divided or  
full-screen handwriting recognition panel). This section also  
describes how to select the desired text entry mode when using  
the phone-style touch keypad or the QWERTY keyboard-style  
touch keypad.  
Built-in QWERTY Keypad  
Changing Text Entry Screens  
Phone-Style (3X4) Touch Keypad  
This is the default text entry screen  
for most features and functions that  
require you to enter text, numbers,  
and/or characters (such as  
Your device also has a keyboard-style touch keypad, commonly  
called QWERTY, that you can access by doing the following:  
1. From the Phone Touch Keypad screen or from either of the  
punctuation and polarity signs.)  
Handwriting Recognition screens, press the down arrow  
You can change your settings in any  
screen where you enter text, and  
you can also access the settings by  
button (  
) (at the upper right corner of the screen). The  
following options appear in the display:  
• 3X4 Keypad — Displays the phone-style touch keypad.  
selecting Menu  
Message Settings  
Mode  
Messaging  
Keypad  
• QWERTY — Displays the keyboard-style touch keypad, in  
landscape mode.  
/
Entry  
.
• Handwriting box — Displays the divided text entry screen with the  
handwritten text entry field at the bottom. Recognized text appears  
in the upper field.  
43  
         
Accessing the Divided Handwriting Recognition Screen  
• Handwriting full screen — Displays the full-screen handwritten  
text entry field. Both handwritten text and the recognized text  
appear in the same field.  
The divided Handwriting  
Recognition screen offers separate  
message text (upper) and dedicated  
handwriting (lower) fields.  
2. Select QWERTY. The keyboard-style touch keypad appears  
and the display automatically rotates to show information  
in a wider, landscape format.  
1. From the Phone Touch  
Keypad screen or from the  
full-screen Handwriting  
Using the QWERTY keypad, you can type letters, numbers,  
punctuation, and other special characters into text entry fields or  
other applications simpler and faster than using the phone-style  
keypad.  
Recognition screen, press the  
down arrow button (  
) (at  
the upper right corner of the  
screen), then select the first  
Handwriting box option.  
Note: Your phone’s Browser function requires you to use the QWERTY  
keypad. Other functions requiring text entry (such as, Messaging and  
Memo Pad) accept text entry from whichever keypad you prefer.  
2. From the QWERTY Touch  
Changing Text Entry Screen Using QWERTY Keypad  
Keypad screen, press  
.
From the QWERTY touch keypad, change to another text  
entry screen by pressing one of the following keys:  
Accessing the Full-Screen Handwriting Recognition Screen  
The full-screen Handwriting Recognition screen offers an  
integrated message text and handwriting input field.  
3X4 Keypad — 4X3 (phone-style) touch keypad  
From the Phone Touch Keypad screen or from the full-  
screen Handwriting Recognition screen, press the down  
Handwriting box  
Divided handwriting recognition screen  
arrow button (  
) (at the upper right corner of the  
Handwriting Recognition Screens  
screen), then select the first Handwriting full screen option.  
Your device also can recognize print handwriting. Just print your  
text, and your device translates it to text in a screen font.  
Entering Text  
44  
 
Entering Text Using Handwriting Recognition Screens  
Changing the Text Entry Mode  
1. Using a stylus, print your text in the handwriting entry field.  
Text messages can be made up of alphabetical characters,  
numbers, and symbols. You can use the following text entry  
modes to simplify text entry:  
The phone replaces your handwriting with printed text.  
2. To enter letters, press  
then print words.  
Abc — Enter letters, numbers, and symbols by repeatedly pressing  
each phone key until the desired character (as shown on the key)  
appears in the display or by using the QWERTY keypad. ABC mode  
letter options are:  
3. To enter numbers and  
symbols, press  
then  
print numbers and/or  
symbols.  
Abc — Enter initial capital letters (indicated by  
ABC — Enter all upper case letters (indicated by  
keys).  
on keys).  
or  
4. To enter a space, press  
on  
on  
.
5. To move to a new line, press  
abc — Enter all lower case letters (indicated by  
or  
.
keys).  
6. To delete text, press  
.
Note: T9 Word does not support the QWERTY keypad or Handwriting  
7. When you are finished writing  
your text, press the Done soft  
key to save your writing.  
Recognition screens, which do not need this function.  
T9 Word — Press each phone key only once to enter the letter of the  
8. To correct any handwriting  
word that you’re spelling. T9 WORD mode letter options are:  
recognition errors, press the down arrow (at the upper  
right corner of the screen), then select 3X4 Keypad or  
T9 Word — Enter initial capital letters (indicated by  
T9 WORD — Enter all upper case letters (indicated by  
T9 word — Enter all lower case letters (indicated by  
on keys).  
on keys).  
on keys).  
QWERTY  
.
123 — Enter numbers by pressing the corresponding keys on the  
phone keypad or the QWERTY keypad (indicated by  
keys).  
or  
on  
45  
         
Changing QWERTY Keypad Text Entry Mode  
Tip: Using the QWERTY keypad or the Handwriting Recognition screens, also  
use 123 mode to enter numbers and symbols into your message simply  
by pressing the keys labeled with the symbols you want.  
While composing a text message or memo, to change text  
entry mode:  
To select abc mode, press  
To toggle between abc and ABC modes, press  
To select 123-Symbols mode, press or  
To select additional Symbols mode, press  
.
Symbols — Using the phone keypad, enter a symbol into your  
message by pressing the key labeled with the desired symbol  
.
.
(indicated by  
or  
on keys).  
.
The current text entry mode (T9 Word, abc, Abc, ABC, 123, or  
Symbols) is indicated on the touch keys. To change the text  
entry mode, do the following:  
Changing Handwriting Recognition Screen Text Entry  
Mode  
While composing a text message or memo, to change text  
entry mode:  
Changing 3X4 Keypad Text Entry Mode  
1. While composing a text message or memo, press the Entry  
To select Abc mode, press  
.
Mode soft key.  
To select 123 mode, press  
®
.
The following options appear in the display:  
Using T9 Mode (Phone Keypad Only)  
Abc  
T9 Word recognizes commonly used words for the numeric  
sequence of key presses and inserts the word into your message.  
T9 Word is much faster than the traditional method of text entry  
(Abc) and requires only one key press per letter of the word that  
you’re spelling.  
abc  
ABC  
T9Word  
T9word  
T9WORD  
123  
1. While composing a text message, press the Entry Mode  
soft key, then select T9Word.  
2. Select the desired text entry mode.  
3. To change to Symbols mode, press the Symbols soft key.  
Entering Text  
46  
   
Pause briefly and the displayed letter is accepted and inserted into your  
message.  
For practice, enter the word “Samsung” by pressing each of the  
following keys only once:  
Press  
to enter a space and press  
to enter a period.  
Using the QWERTY keypad, press the key labeled with the desired  
letter (such as, press for “G” and for “H”).  
S
A
M
S
U
N
G
Using either Handwriting recognition screen, use a stylus to print  
the desired letters.  
T9 Word recognizes that the most commonly used word for the  
numeric sequence you just entered is “Samsung.”  
If more than one word shares the same numeric sequence, T9 Word  
provides the most commonly used word.  
Entering Numbers  
Enter numbers into a text message while in 123 mode.  
1. While composing a text message, do one of the following:  
Note: To enter a space, press  
. To enter a period, press  
. These  
Using the phone keypad, press the Entry Mode soft key, then  
select 123  
key functions apply to both T9 Word and Abc modes. For other  
.
Using the QWERTY keypad, press  
or  
.
Using Abc Mode  
1. While composing a text message, do one of the following:  
Using either Handwriting recognition screen, press  
.
2. Enter numbers while in 123 mode by using one of the  
Using the phone keypad, press the Entry Mode soft key, then  
select Abc  
following:  
.
Using the phone keypad or the QWERTY keypad, press the keys  
labeled with the desired numbers.  
Using the QWERTY keypad, press  
.
Using either Handwriting recognition screen, press  
.
Using either Handwriting recognition screen, use a stylus to print  
the desired numbers.  
2. Enter letters while in Abc mode by using one of following:  
Using the phone keypad:  
Press the key repeatedly until the desired letter appears in the display  
(such as, press once for “G” and twice for “H”).  
Entering Symbols  
Enter symbols (such as “@” or “%”) into a text message while in  
Symbols mode.  
47  
           
While composing a text message, enter symbols by using  
one of following keypads:  
Using the phone keypad:  
Press the Symbols soft key. The first of four symbol screens appears in  
the display.  
Use the Prev and Next soft keys to page through the other symbols, if  
desired.  
Press the key labeled with the symbol that you wish to enter.  
Repeat these steps to insert additional symbols into your message.  
Using the QWERTY keypad:  
Press  
or  
.
Press the key(s) labeled with the corresponding symbol(s) that you wish  
to insert into your message.  
Using either Handwriting recognition screen:  
Press  
.
Use a stylus to print the desired numbers.  
Entering Text  
48  
Section 7: Messaging  
This section explains how to create, send, receive, and view  
different types of messages. This section also describes the  
features and functionality associated with messaging.  
To select a mobile number or Email address using your Contacts  
list, press the Contacts soft key. The Contacts screen appears in  
Creating and Sending New Messages  
This section guides you through procedures for creating and  
sending text and picture messages.  
Select a Contact entry. A check mark appears in the entry’s check box.  
To add the selected Contact to the To list, press the Add soft key. The  
Text Msg screen appears in the display showing the populated To list.  
To enter recipient phone number(s) or Email address(es), select an  
empty To field. The phone-style touch keypad screen appears in  
the display in 123 mode.  
Creating and Sending a Text Message  
1. In Standby mode, press the  
Messaging soft key, then  
To enter a phone number, press the appropriate keys in the proper  
sequence, then press the Done soft key. You are returned to the To list.  
select Send Message  
Text  
Message. The Text Msg  
screen appears in the display  
showing the To list.  
To enter an Email address, change the text entry mode from 123 to  
Text” on page 43.) To add a domain to the address (such as .net or  
.com) press the Shortcuts soft key. When the address is complete,  
press the Done soft key. You are returned to the To list.  
Tip: You can also access Messaging by  
pressing the Menu soft key and  
To select members of a Contacts Group as recipients, press the  
Group soft key. The Groups screen appears in the display.  
selecting Messaging  
.
2. Add the destination address  
for your message by selecting  
contacts and/or entering  
Select the desired Group. The selected Group List screen appears in the  
display.  
Select individual Contacts or select Select All. Check marks appear in  
the check boxes for the selected Contacts.  
number(s) or Email  
address(es) of message recipient(s):  
Press the Add soft key. You are returned to the To list.  
49  
               
To select a phone number from a Recent Call as a recipient, press  
the Recent Calls soft key. The Calls screen appears in the display.  
5. Before sending your text message, you can set message  
send options by pressing the More soft key and select  
If desired, press the down arrow key in the upper right corner of the  
screen, then select All Incoming Outgoing, or Missed calls.  
,
,
Select individual calls or select Select All. Check marks appear in the  
check boxes for the selected calls.  
6. To send your finished message, press the Send soft key.  
Creating and Sending a Picture Message  
Press the Add soft key. You are returned to the To list.  
1.In Standby mode, press the Messaging soft key, then select  
3. When you are finished  
addressing your message,  
press the Next soft key. The  
phone-style touch keypad  
screen appears in the display  
in Abc mode.  
Send Message  
Picture Message. The Picture Msg screen  
appears in the display showing the To list.  
Tip: You can also access Messaging by pressing the Menu soft key and  
selecting Messaging  
.
2. Address your message as you would a Text message (see  
one addition:  
Note: You can use any of the device’s four  
text entry screens to enter your  
To send this message to your Online Album, press the Online  
Album soft key. You are returned to the To list.  
3. When you are finished addressing your message, press the  
Next soft key. The Picture Msg fields screen appears in the  
display.  
4. Enter the text for your  
To use pre-composed text, press the Add Quick Text soft key.  
Messaging  
50  
     
4. If desired, select the Subject  
field. The phone-style touch  
keypad screen appears in the  
display in Abc mode.  
You are returned to the Picture Msg screen which is  
populated with the selected photo in the Picture field.  
8. If desired, you can add a sound file to accompany the  
picture by selecting the Sound field. The My Sounds screen  
appears in the display listing available sound files.  
Note: You can use any of the device’s four  
text entry screens to enter your  
To add an existing sound file, select the preferred file and press the  
Send soft key.  
To create a new sound file, press the Record New soft key. (For  
5. Enter the Subject text. (For  
You are returned to the Picture Msg screen which is  
populated with the selected sound file in the Sound field.  
9. Before sending your Picture message, you can set  
message send options by pressing the More soft key and  
To use pre-composed text, press  
the Add Quick Text soft key.  
6. If desired, repeat steps 4 and 5 for the Text field.  
7. To add a picture to the message, select the Picture field.  
You are prompted to Take a Photo or to add a photo from  
the My Images folder.  
10. To preview your Picture message as the recipient(s) will  
see it, press the Preview soft key.  
To make changes to your message, press the Back soft key.  
To activate the phone’s camera and take a new picture, select Take  
on page 63.) Once you’ve take a photo, press the Send soft key.  
11. To send your finished message, press the Send soft key.  
Send Picture Messages in Camera Mode  
To access your photo gallery, select My Images. With pictures in  
the gallery, a list of thumbnail images appears in the display. Select  
the desired photo and press the Send soft key.  
Picture messages can be sent from your phone’s camera to  
recipients with compatible phones or devices. You can even  
accompany a picture with a voice memo or preloaded sound file.  
51  
   
Creating and Sending a Video Message  
1.In Standby mode, press the Messaging soft key, then select  
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate To field of the Picture  
Msg screen.  
Send Message  
Video Message. The Video Msg screen  
appears in the display showing the To list.  
1. In Standby mode, press and hold the Camera key (  
).  
The camera viewfinder screen appears in the display.  
Tip: You can also access Messaging by pressing the Menu soft key and  
selecting Messaging  
.
2. Using the display as a viewfinder, when the image that you  
wish to send appears in the display, press the Camera key  
2. Address your message as you would a Text message (see  
one addition:  
(
) to take a picture.  
Note: For more information about using the camera feature in your phone,  
To send this message to your Online Album, press the Online  
Album soft key. You are returned to the To list.  
3. Press the Send soft key. If necessary, the device resizes  
your picture for sending, then the Picture Msg screen  
appears in the display showing the To list.  
3. If desired, select the Subject  
field. The phone-style touch  
keypad screen appears in the  
display in Abc mode.  
4. Address your message as you would a Text message (see  
one addition:  
Note: You can use any of the device’s four  
text entry screens to enter your  
To send this message to your Online Album, press the Online  
Album soft key. You are returned to the To list.  
5. When you are finished addressing your message, press the  
Next soft key. The Picture Msg fields screen appears in the  
display with your new picture populating the Picture field.  
4. Enter the Subject text. (For  
6. To complete and send your message, refer to steps 4 – 11  
Messaging  
52  
   
Send Video Messages in Camcorder Mode  
To use pre-composed text, press the Add Quick Text soft key.  
5. If desired, repeat steps 3 and 4 for the Text field.  
Video messages can be sent from your phone’s camcorder to  
recipients with compatible phones or devices.  
6. To add a video clip to the message, select the Video field.  
You are prompted to Take a Video or to add a video clip  
from the My Videos folder.  
Tip: You can send a Video message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate To field of the Video  
Msg screen.  
To activate the phone’s camcorder and record a new video clip,  
Camcorder” on page 63.) Once you’ve recorded a video clip,  
press the Send soft key.  
1. In Standby mode, press the Camera key (  
). The  
camera viewfinder screen appears in the display.  
To access your photo gallery, select My Videos. With video clips in  
the gallery, a list of thumbnail images appears in the display. Select  
the desired video clip and press the Send soft key.  
2. Press the Mode soft key. The camcorder viewfinder screen  
appears in the display.  
3. Press the Recording Mode soft key. Select the Video Msg  
You are returned to the Video Msg screen which is  
populated with the selected video clip in the Video field.  
option.  
7. Before sending your Video message, you can set message  
send options by pressing the More soft key and select  
Note: For more information about setting camcorder options in your phone,  
4. Using the display as a viewfinder, when the image that you  
wish to send appears in the display, press the Camera key  
8. To preview your Video message as the recipient(s) will see  
(
) to record a video. The time counter at the bottom  
it, press the Preview soft key.  
of the Camcorder viewfinder screen indicates recording  
time in seconds.  
To make changes to your message, press the Back soft key.  
9. To send your finished message, press the Send soft key.  
5. To end your video clip, press Stop  
(
).  
53  
• Priority Level — Lets you  
assign a High Normal, or Low  
(pic/video messages only) priority  
to the message.  
Note: For more information about using the camcorder feature in your  
,
6. Press the Send soft key. If necessary, the device resizes  
your picture for sending, then the Video Msg screen  
appears in the display showing the To list.  
• Validity Period — Lets you  
select a Date and Time when  
this message will no longer be  
available to the recipient. When  
your selected date and time  
pass, your message is recalled.  
7. Address your message as you would a Text message (see  
one addition:  
• Enhanced Delivery Ack  
/
To send this message to your Online Album, press the Online  
Delivery Ack — Set to On to be  
alerted when your message is  
received by the addressee.  
Album soft key. You are returned to the To list.  
8. When you are finished addressing your message, press the  
Next soft key. The Video Msg fields screen appears in the  
display with your new picture populating the Video field.  
• Deferred Delivery Time — Lets  
you set a Date and Time when this message will be delivered.  
9. To complete and send your message, refer to steps 3 – 9  
2. Select any desired options and values for those options.  
3. To save your settings, press the OK soft key. You’re  
Message Sending Options  
returned to the message creation screen.  
You can set priority, validity, and other options before you send a  
message. Which options appear in the Sending Options list  
depends on what type of message you have composed and what  
message field you have highlighted.  
Receiving New Messages  
When you receive a message in Standby mode, one of the  
following occurs:  
If Auto View and Auto Scroll are both set to On — An alert sounds  
1. After you’ve composed a Text, Picture, or Video message,  
press the More soft key and select Sending Options. The  
following options appear in the display:  
(unless turned off) and the message text automatically appears in the  
Messaging  
54  
       
display and scrolls slowly to the end of the message. (For more  
If Auto View is set to Off — An alert  
sounds (unless turned off) and a New  
Message notification appears in the  
page 58.)  
A
New Message notification appears in the display along with the  
closed envelope icon ( ). The date and time of the message and  
the following options also appear in the display:  
View Now — Opens the message where you have the option to Reply,  
Forward, Erase, Add To Contacts, Lock/Unlock, or Save Quick Text,  
Message Info.  
View Later — Closes the popup and saves the message to your inbox  
where you can view it later.  
display along with the closed envelope  
icon (  
). The date and time of the  
message and the following options  
also appear in the display:  
View Now — Opens the message  
where you have the option to Reply,  
Forward, Erase, Add To Contacts,  
Lock/Unlock, or Save Quick Text,  
Message Info.  
View Later — Closes the popup and  
saves the message to your inbox  
where you can view it later.  
Select the desired option.  
Voicemail  
Voicemail allows callers to leave voice messages in your voice  
mailbox, and lets you review, play, and delete your voice  
messages any time you are in your Carrier’s network coverage  
area.  
Voice Mail Setup  
Select the desired option.  
Before callers can leave voice mail messages, you must first set  
Receive Messages While in a Call  
When you receive a message while in a call, one of the following  
occurs:  
Checking your Voicemail  
If Auto View and Auto Scroll are both set to On — The message text  
automatically appears in the display and scrolls slowly to the end of  
1. In Standby mode, change to Dialer mode, then press and  
hold  
until you’re connected to your Wireless  
55  
         
Carrier’s voicemail system. A recorded message prompts  
you for a password.  
To delete this message, press the Erase soft key. You are prompted  
to verify the erasure. To erase this message, press the Yes button.  
To access other options, press the More soft key. The following  
options appear in the display:  
2. Enter your password, then follow the recorded prompts, to  
listen to your voice message(s), change administrative  
options, and so on.  
Add To Contacts — Lets you add the sender’s number or Email  
address to your Contacts list.  
Tip: You can also access your voice mail by selecting an entry in the  
Lock Unlock — Blocks or allows erasure of the message.  
/
Voicemail folder.  
Save Quick Text — Saves the message text as a Quick Text entry.  
Message Info — Lets you display status information about a  
message.  
Message Folders  
Inbox  
Select an option to perform the function for that option.  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Messages and Lock Mode  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message appear in the display, but you  
cannot access the message until you enter the lock code. (For  
1. In Standby mode, press the Messaging soft key, then select  
Inbox, to open the Inbox folder.  
2. To delete one or more messages, press the Erase soft key,  
select the message(s) to be deleted, then press the Erase  
soft key again.  
Outbox  
Your phone stores outgoing messages in the Outbox, regardless  
of whether the message was successfully sent to, or received by,  
the addressee.  
3. To view a message, select it, then do one of the following  
To compose and send a message to the sender of the message,  
press the Reply soft key, then select the type of message you wish  
to compose: Text, Picture, or Video.  
Tip: Verify whether and when a message or Email was successfully received  
by enabling the Delivery Ack message send option. (For more  
To forward the message to other recipients, press the Forward soft  
key.  
Messaging  
56  
       
1. In Standby mode, press the Messaging soft key, then select  
Outbox. A list of your outgoing messages appears in the  
display.  
Drafts Folder  
Messages in the Drafts folder are those that have been  
composed but never sent. You can return to the Drafts folder at  
any time to view, edit, or send a draft message.  
2. To delete one or more messages, press the Erase soft key,  
select the message(s) to be deleted, then press the Erase  
soft key again.  
1. In Standby mode, press the Messaging soft key, then select  
Drafts. A list of your draft messages appears in the display.  
3. To view a message, select it, then do one of the following  
2. To delete one or more messages, press the Erase soft key,  
select the message(s) to be deleted, then press the Erase  
soft key again.  
To resend a message to the original recipient(s), press the Resend  
soft key.  
To forward the message to other recipients, press the Forward soft  
key.  
3. To view a message, select it, then do one of the following  
To send a message to the original recipient(s), press the Send soft  
To delete this message, press the Erase soft key. You are prompted  
to verify the erasure. To erase this message, press the Yes button.  
key.  
To change the message and/or the recipients, press the Edit soft  
key.  
To access other options, press the More soft key. The following  
options appear in the display:  
To delete this message, press the Erase soft key. You are prompted  
to verify the erasure. To erase this message, press the Yes button.  
Add To Contacts — Lets you add the sender’s number or Email  
address to your Contacts list.  
To access other options, press the More soft key. The following  
options appear in the display:  
Lock Unlock — Blocks or allows erasure of the message.  
/
Save Quick Text — Saves the message text as a Quick Text entry.  
Add To Contacts — Lets you add the sender’s number or Email  
Message Info — Lets you display status information about a  
address to your Contacts list.  
message.  
Lock Unlock — Blocks or allows erasure of the message.  
/
Select an option to perform the function for that option.  
Save Quick Text — Saves the message text as a Quick Text entry.  
Message Info — Lets you display status information about a  
message.  
57  
 
Select an option to perform the function for that option.  
Voicemail  
1. In Standby mode, press the Messaging soft key, then select  
Erase Messages. The following options appear in the  
display:  
New voice messages in your voice mailbox are logged in the  
Voicemail folder of the Messaging menu. Open the Voicemail  
folder to view the Callback # (if available), Urgency, and other  
details of new voicemail messages.  
• Inbox — Lets you delete all messages from your Inbox.  
• Outbox — Lets you delete all messages from your Outbox.  
• Drafts — Lets you delete all draft messages from the Drafts folder.  
• All Messages — Lets you delete all messages from all message  
1. In Standby mode, press the Messaging soft key, then select  
Voicemail. A Voicemail status screen indicating the number  
of new messages in your voice mailbox, their urgency, and  
any callback numbers appears in the display.  
folders.  
2. Select the folder(s) containing the messages that you wish  
to delete. You are prompted to confirm the erasure of all  
messages in the folder(s).  
2. Press the Call soft key or press  
to call your voice  
3. To cancel deleting any messages, press the No soft key. To  
delete all messages from the selected folder, press the Yes  
soft key.  
mailbox and listen to your voice messages.  
Note: You can, in Standby mode, also tap Dialer, and then press and hold  
to dial your voice mailbox.  
Message Settings  
Erasing Messages  
You can erase all of the messages in each/all of your message  
folders from one convenient location.  
The Message Settings let you customize messaging to suit your  
preferences.  
1. In Standby mode, press the Messaging soft key, then select  
Message Settings. The Message Settings screen appears in  
the display listing the following options:  
Note: This function erases all messages in a selected message folder or in  
all message folders. To delete a single message, from the Messaging  
menu, select the message folder where the message to be deleted is  
stored, then press the Erase soft key, select the message in the list,  
and press the Erase soft key again.  
• Auto Save/Auto Erase — Lets you set your device messaging to:  
Automatically save unsent messages to the Outbox folder, to discard  
them, or to prompt you to select to save/discard unsent messages.  
Messaging  
58  
         
Automatically erase/or prompt you to delete the oldest read messages  
after message memory is full and new messages are received.  
• Picture/Video Msg Download — When set to On, your device  
automatically downloads Picture and Video messages to your Inbox  
folder when they are received. When set to Off, you are prompted  
to select whether to download the message now or later.  
• Quick Text — Lets you change pre-composed text or compose  
text for addition to your outgoing messages.  
2. Select any desired options and settings for those options.  
• Voicemail Number — Lets you update your Voicemail access  
number.  
3. To save your settings, press the OK soft key. You are  
returned to the Message Settings menu.  
• Keypad/Entry Mode — Lets you set the following:  
Default Keypad (3X4 Keypad, QWERTY, Handwriting box, Handwriting  
full screen) for entering message text.  
Default text Entry Mode [Abc/abc/ABC (alphabetically), T9 Word, or  
123 (numerical)] for composing message text.  
• Callback Number — Lets you disable (Off), enable (On), and  
update the callback number that can be inserted in outgoing  
messages.  
• Signature — Lets you disable (Off), enable (On), and update the  
text signature that can be inserted in outgoing messages.  
• Reminder — Lets you set the message receipt reminder to play  
Once Every 2 Minutes, Every 15 Minutes, or not to play (Off).  
,
Text Msg View — Lets you set messaging to do the following:  
Auto View — Set your device to Display your incoming text messages  
automatically when they’re received or to prompt you whether to view  
them now or later.  
View Mode — Set device messaging to display incoming text  
messages one at a time or to display text messages (outgoing and  
incoming) in a chat-style view.  
59  
Section 8: easyedgeSM  
SM  
This section explains the easyedge features where users can  
download multimedia, applications, games, and check news and  
sports.  
2. Tap the Left navigation soft  
key to select the my stuff tab  
You can use the navigation  
.
soft keys to browse or search  
for, purchase, and download  
applications.  
Finding Applications  
With easyedge , you can download  
full featured applications over the  
air including games, personalized  
ring tones, pictures, and more.  
SM  
3. Tap the OK soft key to select  
an application on your phone  
that you wish to launch.  
1. In Standby mode, tap the  
Menu soft key, then select  
easyedge  
.
Note: Some applications do not support the  
touch screen. Refer to the  
instructions for particular  
applications.  
SM  
The easyedge screen  
appears in the display with  
the easyedge shop tab  
highlighted.  
4. Press the  
key to exit the menu.  
easyedgeSM  
60  
   
Section 9: Browser  
This section outlines how to launch Browser, how to navigate to  
other pages on the web, and how the keys on the keypad are  
used with the web application. Additionally, links to other sites  
are briefly discussed.  
The Browser screen appears in the display in landscape  
mode. A list of categories (each representing one or more  
web sites) appears in the display.  
Browser Features  
With Browser, you can conveniently surf the web and download  
ringtones and wallpapers using your phone. Each time you  
launch Browser, your phone connects to the Internet and the  
service indicator icon with a red arrow (  
display.  
) appears in the  
Stored Web Content  
2. Select the desired category, to enter the category list.  
Browser ends an Internet connection after a certain period of  
inactivity, however some information from your session remains  
stored in the phone (if you leave your phone turned on). You can  
access this information without reconnecting to the Internet.  
However, if you are viewing stored information, and you select a  
link to a site that was not accessed in your last session, you  
automatically re-connect to the Internet.  
Exit Browser  
To exit Browser, press  
Using Browser  
Browser presents on-screen items in any of the following ways:  
Text or numeric input.  
.
Launching Browser  
1. In Standby mode, press the Menu soft key, then select  
Note: When entering text in a web page field, Browser limits you to using the  
QWERTY touch keypad.  
Browser  
.
Links (embedded in content).  
61  
         
Numbered options (some may not be numbered).  
Simple text.  
Favorites — Displays and lets youselect from a list  
of web sites you have saved as your favorites.  
You can act upon options or links by selecting them.  
Add to Favorites — Lets you save the address and  
Using Links  
title of the current web page to your favorites list.  
Links have several purposes, such as jumping to a different  
page, to a different site, or even initiating a phone call. Links are  
shown inside of brackets ([ ]). You can normally select a link.  
Slide — Lets you press and slide the current web  
page to view non-displayed portions of the page.  
Settings — Launches the Browser Settings menu,  
letting you customize Browser to suit your needs.  
How Browser Buttons Work  
ThetopandrightsideoftheBrowserscreencontaincontrolbars.The  
following table lists Browser buttons that appear in the control bars  
Press to exit the Browser and return the phone to  
Standby mode.  
and their functions and the  
key.  
Back — Displays the previously viewed web page,  
if any.  
Forward — Displays the previously viewed web  
page, if any.  
Refresh — Reloads and displays the current web  
page.  
Home — Loads and displays the web page  
designated as your “home page”.  
Zoom — Lets you enlarge or shrink web pages.  
Browser  
62  
   
Section 10: Camera-Camcorder  
Use your Samsung phone to take full color digital pictures and  
videos, display them on your phone’s vivid color display, and  
instantly share them with family and friends. It’s fun, and as easy  
to use as a traditional point-and-click camera or camcorder. This  
section explains how you can do the following:  
Take pictures and videos with your phone’s built-in digital camera-  
camcorder.  
Send and receive pictures and videos taken with your phone’s camera-  
camcorder.  
Set the several options associated with the camera-camcorder that  
help you take crisp, clear pictures and videos.  
Note: You can also activate the camera by pressing the Menu soft key, then  
select Multimedia  
Camera.  
Taking Pictures and Videos  
Taking pictures videos with the built-in camera-camcorder is as  
simple as choosing a subject, pointing the lens (located on the  
rear of your phone, at the top), and pressing a button.  
2. Using the display as a viewfinder, point the camera at your  
subject.  
3. When the image that you wish to capture appears in the  
display, press the Camera key (  
).  
Taking Snap Shots (Single Pictures)  
To take a single picture using the current camera settings, do the  
following:  
4. Do one of the following:  
Press the Save soft key to save the picture to memory.  
Press the Erase soft key to erase the photo.  
1. In Standby mode, press and hold the Camera key (  
)
Press the Send soft key to email the photo.  
on the right side of the phone. The camera viewfinder  
screen appears in the display. (For more information, refer  
Press Set as Wallpaper to change the background on your device.  
63  
           
5. To exit the Camera feature, press  
.
• Mosaic — Lets you take a mosaic of 4 or 9 photos with a single  
press of the Camera key ( ).  
Tip: You can change a number of the camera’s settings to suit particular  
• Frame — Lets you temporarily (for this session only) apply one of  
the preloaded picture frames in your phone to characterize or  
enhance one or more pictures.  
Taking Multi Shot Pictures  
3. When you select the Multi option, the following options  
appear in the display:  
When taking pictures of moving subjects or subjects you cannot  
pose, such as children and pets, the camera’s Multi Shot mode  
simplifies the process of taking multiple pictures in quick  
succession. After taking Multi Shot pictures, the camera  
automatically displays thumbnail views of the pictures you have  
just taken so you can select the best picture(s) and discard the  
rest.  
• 3  
• 5  
When you select Mosaic, the following options appear in  
the display:  
1. In Standby mode, press and hold the Camera key (  
on the right side of the phone. The camera view finder  
screen appears in the display. (For more information, refer  
)
4. Select the desired number of shots.  
The Multi progress bar (  
) or the Mosaic icon (  
or  
Note: You can also activate the camera by pressing the Menu soft key, then  
or  
)
select Multimedia  
Camera.  
(which acts as a progress bar while pictures are being  
taken) appears in the display.  
2. Press the Shooting Mode button. The following options  
appear in the display:  
5. Using the display as a viewfinder, point the camera lens at  
• Single — Lets you take a single photo.  
your subject.  
• Multi — Lets you take a series of 3 or 5 photos with a single press  
of the Camera key (  
).  
Camera-Camcorder  
64  
6. Press the Camera key (  
) when the image that you  
4. Press the Camera key (  
) when the image that you  
wish to capture appears in the display. The camera takes  
wish to capture appears in the display. Recording  
multiple pictures in quick succession (Multi) or one each  
continues until you press the Camera key (  
time or until 15 seconds of video has been recorded,  
whichever comes first.  
) a second  
time you press the Camera key (  
) (Mosaic), then the  
multiple-photo screen appears in the display.  
To discard the pictures, press the Erase button.  
To discard the video clip, press the Erase button.  
To send video in a video message, press the Send button  
To save the video to memory, press the Save button.  
To set a picture as the Standby mode screen wallpaper, press the  
Set as Wallpaper button.  
To send a picture in a picture message, press the Send button  
Screen Layouts  
Camera Screen  
To save the pictures to memory, press the Save button.  
Taking Videos  
To take a video using the current camcorder settings, do the  
following:  
1. In Camera mode, press and hold the Camera key (  
on the right side of the phone. The camera view finder  
screen appears in the display.  
)
2. Press the Mode button. The camcorder view finder screen  
When you activate your phone’s camera, the second line of the  
display is reserved for the current camera resolution setting and  
the picture counter. The center of the display shows a viewfinder  
image of the subject at which the camera is pointed.  
Note: You can also activate the camcorder by pressing the Menu soft key,  
then selecting Multimedia  
Camcorder  
.
3. Using the display as a viewfinder, point the camera lens at  
your subject.  
65  
   
Camera Screen Buttons  
Button/Icon Display  
Changes the Camera-Camcorder mode to Camcorder.  
1. In camera mode, with the buttons and icons appearing in  
the display, tap the screen once to hide the Camera icons,  
then press the icon bar again to hide the Camera buttons.  
Lets you set the Camera’s Shooting Mode to Single  
,
2. In camera mode, with the buttons and icons not appearing  
in the display, tap the screen once to display the Camera  
icons and buttons.  
Multi Mosaic, or Frame  
,
.
Lets you set the resolution of your photos between  
3Megapixels – 0.3Mmegapixels and Picture ID  
.
Camcorder Screen  
Lets you select Quality  
,
Self Timer, White Balance, ISO,  
Effects Exposure Metering, and more.  
,
Lets you set the Camera’s Flash to On Off, or Auto.  
,
Lets you set the Camera’s Focus to Normal or Macro  
.
When you activate your phone’s camcorder, the first line of the  
display is shows current camcorder setting icons. The center of  
the display shows a viewfinder image of the subject at which the  
camcorder is pointed.  
Lets you set the Camera to brighten or darken your  
photos.  
Lets you access the My Images folder.  
Camera-Camcorder  
66  
   
Camcorder Screen Buttons  
Button/Icon Display  
Changes the Camera-Camcorder mode to Camcorder.  
1. In Camcorder mode, with the buttons and icons appearing  
in the display, tap the screen once to hide the Camcorder  
icons, then tap the screen again to hide the Camcorder  
buttons.  
Lets you set the Camcorder’s Recording Mode to Normal  
or Video Msg  
.
2. In Camcorder mode, with the buttons and icons not  
appearing in the display, tap the screen once to display the  
Camcorder icons and buttons.  
Lets you set the Camcorder’s resolution to 320x240 or  
176x144 (pixels).  
Saving Pictures and Videos  
After you’ve taken a picture or video, you can do any of the  
following:  
Lets you select values for Quality  
,
Self Timer White  
,
Balance, and Effects  
.
Save the picture or video by pressing the Save soft key.  
A picture is stored in the My Images folder. A video is stored in the My  
Videos folder. These folders are part of the phone’s memory and/or  
part of an optional Memory Card devoted to storing, browsing, and  
viewing saved pictures and videos. (For more information, refer to  
Lets you set the Camcorder’s Flash to On Off, or Auto.  
,
Not supported by the Camcorder.  
Lets you set the Camcorder to brighten or darken your  
videos.  
Send the picture or video to someone else by pressing the Send soft  
key.  
Lets you access the My Videos folder.  
Discard the picture or video by pressing the Erase soft key.  
67  
       
• Frame — Lets you temporarily (for this session only) apply one of  
the preloaded picture frames in your phone to characterize or  
enhance one or more pictures.  
Camera Options  
The Camera Options let you adjust the default camera settings to  
suite available lighting, the subject of the photo, or the purpose of  
the photo. To access Camera Options, do the following:  
2. When you select the Multi option, the following options  
appear in the display:  
1. In Standby mode, press and hold the Camera key (  
).  
• 3  
The camera viewfinder screen appears in the display.  
• 5  
2. Select the any of the following buttons:  
When you select Mosaic, the following options appear in  
Mode  
the display:  
Switches to Camcorder mode. The Camcorder view finder screen  
appears in the display.  
Shooting Mode  
Multi  
3. Select the desired number of shots.  
Multi Shot lets you take multiple pictures in succession at the  
touch of a key.  
The Multi progress bar (  
) or the Mosaic icon (  
or  
or  
)
1. In camera mode, press the Shooting Mode button, then  
highlight Multi Shot. The following options pop-up:  
• Single — Lets you take a single photo.  
(which acts as a progress bar while pictures are being  
taken) appears in the display.  
• Multi — Lets you take a series of 3 or 5 photos with a single press  
4. Select the desired option and setting. The related icon  
of the Camera key (  
).  
appears in the display.  
• Mosaic — Lets you take a mosaic of 4 or 9 photos with a single  
press of the Camera key ( ).  
Camera-Camcorder  
68  
     
When you press the Camera key (  
), the camera takes  
• 1600x1200 (pixels)  
• 1280x960 (pixels)  
• 1024x768 (pixels)  
• 640x480 (pixels)  
several pictures in rapid succession (Multi), or lets you take  
one picture after another (Mosaic).  
Frames  
• Picture ID — lets you take pictures the correct size and resolution  
Frames lets you temporarily apply one of the preloaded picture  
frames in your phone to characterize or enhance one or more  
pictures.  
for Contacts list picture IDs.  
2. Select the desired option. You’re returned to the camera  
viewfinder screen.  
Note: The None frame is a blank frame.  
Note: The Size setting affects zoom capabilities. When Size is set to 2048 x  
1536, zoom is not available. When Size is set to any value lower than  
2048 x 1536, zoom settings 1 – 9 are available.  
1. In camera mode, press the Shooting Mode button, then  
select Frames. A pop-up menu of the available Fun Frames  
appears in the display.  
Settings — Camera Tab  
Quality  
2. Select the Frame you wish to use. The camera screen  
appears in the display with your selected Frame in place.  
You can affect how much your photo is compressed, thereby  
reducing it’s overall size (not to be confused with its resolution).  
When you take your next picture, the camera includes the  
selected Frame in your picture.  
1. In camera mode, press the Settings soft key, then select  
Camera Tab Quality  
2. Select one of the options: High  
returned to the camera viewfinder screen.  
.
Size  
,
Normal, or Economy. You’re  
Change the size (in bytes) of your pictures by changing the  
picture resolution setting.  
Self Timer  
1. In camera mode, press the Size button. The following  
Self Timer lets you delay taking a picture long enough to let you  
join others in a picture.  
options pop-up:  
• 2048x1536 (pixels)  
69  
 
1. In camera mode, press the Settings soft key, then select  
Camera Tab Self Timer  
The following values appear in the camera screen:  
• Daylight — Use this setting when taking pictures in full sun.  
.
• Cloudy — Use this setting when taking pictures in cloudy  
conditions.  
Tungsten — Use this setting when taking pictures under  
Off  
incandescent lights.  
3 Seconds  
5 Seconds  
10 Seconds  
• Fluorescent — Use this setting when taking pictures under  
fluorescent lights.  
Each option, as you highlight it, shows the effects it has on a picture.  
2. Select the White Balance you wish to use. The camera  
viewfinder screen appears in the display with your  
selected White Balance applied.  
2. Select the desired Self Timer option. If you select  
3
,
5, or  
10, the Self Timer icon appears in the camera screen in the  
display.  
When you press the Camera key (  
), the countdown  
The next time you press the Camera key (  
), the  
timer indicates the time remaining before the camera  
takes the picture.  
camera applies the selected White Balance to your picture.  
Effects  
Tip: To stop the countdown timer without resetting it, press  
.
Change the look of your pictures with Effects. Choose from six  
available settings such as Gray, Negative, and Sepia. The  
selected color effect previews in the display before you take the  
picture.  
White Balance  
White Balance allows you to adjust picture quality according to  
available light.  
1. In camera mode, press the Settings soft key, then select  
1. In camera mode, press the Settings soft key, then select  
Camera Tab Effects. The following options pop-up:  
Camera Tab White Balance. The following options pop-  
up:  
Note: Choose Normal to disable Color Effects.  
• Auto — The camera automatically adjusts picture quality to  
available light.  
• Normal — Subjects and pictures appear with a normal hue.  
Camera-Camcorder  
70  
 
• Sketch — Subjects and pictures appear as black and white  
outlines.  
• Center-weighted — Adjusts exposure to the average light level  
over a center portion of the subject.  
• Negative — Subjects and pictures appear in inverted colors.  
• Sepia — Subjects and pictures appear in a brownish-gray hue.  
• B & W — Subjects and pictures appear in black and white.  
• Aqua — Subjects and pictures appear in an aqua hue.  
• Spot — Adjusts exposure to the light level over a small portion of  
the subject.  
2. Select the Metering setting of your choice. You’re returned  
to the camera viewfinder screen.  
When you take your next picture, the phone’s display  
2. Select the color effect of your choice. You’re returned to  
previews your subject image with the measured exposure.  
the camera viewfinder screen.  
When you take your next picture, the phone’s display  
Settings — Common Tab  
previews your subject image with the selected color effect.  
Default Storage  
ISO  
1. In camera mode, press the Settings soft key, then select  
Common Tab Default storage. The following options  
appear in the display:  
The ISO feature allows you to set the camera exposure index.  
1. In camera mode, press the Settings soft key, then select  
• Phone Memory — Stores pictures in phone memory.  
Camera Tab ISO  
2. Select one of the options: Auto  
returned to the camera viewfinder screen.  
.
• Card Memory — Stores pictures on an optional microSD Memory  
Card.  
,
100, 200, or 400. You’re  
2. Select the memory location setting of your choice. You’re  
Exposure metering  
returned to the camera viewfinder screen.  
1. In camera mode, press the Settings soft key, then select  
Camera Tab Exposure metering. The following options  
appear in the display:  
Auto Save  
1. In camera mode, press the Settings button, then select  
Common Tab Auto Save. The following options appear in  
the display:  
• Normal — Adjusts exposure to the average light level over a large  
picture area.  
• Off  
71  
• On  
• Melody  
2. Select the automatic save setting of your choice. You’re  
2. Select the shutter sound setting of your choice. You’re  
returned to the camera viewfinder screen.  
returned to the camera viewfinder screen.  
Guideline  
Brightness  
Shows a cross hatch pattern in the view finder screen.  
Brightness lets you temporarily lighten the pictures you take.  
Increasing the Brightness (-4 settings – +4 settings) lightens  
1. In camera mode, press the Options soft key, then highlight  
your pictures ( is normal).  
0
Settings and select Guideline. The following options appear  
in the display:  
1. In camera mode, press the Brightness button. The  
• Off  
horizontal Brightness scale appears in the display.  
• On  
2. To increase Brightness (brighten your picture), press the  
+
button. To decrease Brightness (darken your picture), press  
the button.  
The next time you press the Camera key (  
2. Select the viewfinder screen setting of your choice. You’re  
-
returned to the camera viewfinder screen.  
), the  
Shutter Sound  
camera takes a lighter or darker picture according to your  
selected Brightness setting.  
Choose from four different sounds whenever you take a picture.  
Aside from being a cool sound effect, Shutter Sounds acts as an  
audible reminder that your camera has taken a picture.  
Zoom  
1. In camera mode, press the Settings button, then select  
Common Tab Shutter Sound. The following shutter  
sounds appear in the display:  
Zoom lets you temporarily enlarge the pictures you take.  
Increasing the Zoom (2 – 9) enlarges your pictures or videos (1 is  
normal).  
• Off  
1. In camera mode, press the Volume key (on the left side of  
the phone) up or down. The horizontal Zoom scale appears  
in the display.  
• Shutter  
• OK  
Camera-Camcorder  
72  
     
2. To Zoom in on a subject, press the Volume key down.  
• Video Msg — Record videos that are a maximum of 15 seconds  
long. The videos can be included in video messages.  
3. To Zoom out from a subject, press the Volume key up.  
2. Select the desired recording mode setting. The camcorder  
The next time you press the Camera key (  
), the  
viewfinder screen appears in the display.  
camera takes an enlarged picture according to your  
selected Zoom setting.  
Note: The Recording Mode setting affects the following settings:  
-
Size — When Recording Mode is set to Video Msg, the Size setting is  
locked at 176 x 144  
Note: The Size setting affects zoom capabilities. When Size is set to 1600 x  
1200, zoom is not available. When Size is set to any value lower than  
1600 x 1200, zoom settings 1 – 9 are available.  
.
-
Quality — When Recording Mode is set to Video Msg, the Quality  
setting is locked at Economy  
.
Camcorder Options  
The Camcorder Options let you adjust the default camcorder  
settings to suite available lighting, the subject of the video, or the  
purpose of the video.  
Size  
Change the size (in bytes) of your videos by changing the video  
resolution setting.  
1. In camera mode, press the Size button. The following  
options pop-up:  
To access Camcorder Options, press/select the any of the  
following buttons/options:  
• 320 x 240 (pixels)  
Mode  
• 176 x 144 (pixels)  
Switches to Camera mode. The Camera view finder screen  
appears in the display.  
2. Select the desired option. You’re returned to the camera  
viewfinder screen.  
Recording Mode  
1. In camcorder mode, press the Recording Mode button. The  
Note: The Size setting is affected by the Recording Mode setting. When  
Recording Mode is set to Video Msg, the Size setting is locked at 176 x  
144.  
following options appear in the display:  
• Normal — Record videos that are any length up, depending on  
available memory.  
73  
   
Settings — Camcorder Tab  
Quality  
3 Seconds  
5 Seconds  
10 Seconds  
You can affect how much your video is compressed, thereby  
reducing it’s overall size (not to be confused with the Size  
setting).  
2. Select the desired Self Timer option. If you select  
3
,
5, or  
10, the Self Timer icon appears in the camcorder screen in  
the display.  
1. In camcorder mode, press the Settings button, then select  
When you press the Camera key (  
), the countdown  
Camcorder Tab Quality. The following options appear in  
the display:  
timer indicates the time remaining before the camcorder  
begins recording.  
• High  
• Normal  
Tip: To stop the countdown timer without resetting it, press  
.
• Economy  
White Balance  
2. Select the quality setting of your choice. You’re returned to  
the camcorder viewfinder screen.  
White Balance allows you to adjust video quality according to  
available light.  
Note: The Quality is affected by the Recording Mode setting. When Recording  
Mode is set to Video Msg, the Quality setting is locked at Economy  
.
1. In camcorder mode, press the Settings button, then select  
Camcorder Tab White Balance. The options are:  
• Auto — The camcorder automatically adjusts color balance to  
available light.  
Self Timer  
Self Timer lets you delay recording a video long enough to let you  
join others in a picture.  
• Daylight — Use this setting when recording videos in full sun.  
1. In camcorder mode, press the Settings button, then select  
Camcorder Tab Self Timer. The following options appear  
in the display:  
• Cloudy — Use this setting when recording videos in cloudy  
conditions.  
Tungsten — Use this setting when recording videos under  
incandescent lights.  
Off  
Camera-Camcorder  
74  
 
• Fluorescent — Use this setting when recording videos under  
fluorescent lights.  
• B & W — Subjects and pictures appear in black and white.  
• Aqua — Subjects and pictures appear in an aqua hue.  
2. Select the White Balance you wish to use. The camcorder  
viewfinder screen appears in the display with your  
selected White Balance applied.  
2. Select the color effect of your choice. You’re returned to  
the camcorder viewfinder screen.  
When you record your next video, the phone’s display  
previews your subject image with the selected color effect.  
The next time you press the Camera key (  
), the  
camcorder applies the selected White Balance to your  
video.  
Camcorder Settings — Common Tab  
Default storage  
Effects  
1. In camcorder mode, press the Settings button, then select  
Common Tab Default storage. The following Memory  
options appear in the display:  
Change the look of your videos with Color Effects. Choose from  
six available settings such as Gray, Negative, and Sepia. The  
selected color effect previews in the display before you take the  
picture.  
• Phone Memory — Stores videos in phone memory.  
• Card Memory — Stores videos on an optional microSD Memory  
Card.  
1. In camcorder mode, press the Settings button, then select  
Camcorder Tab Effects. The following options appear in  
the display.  
2. Select the memory location setting of your choice. You’re  
returned to the camcorder viewfinder screen.  
Note: Choose Normal to disable Color Effects.  
Auto Save  
1. In camcorder mode, press the Settings button, then select  
• Normal — Subjects and pictures appear with a normal hue.  
Common Tab Auto Save. The following options appear in  
the display:  
• Sketch — Subjects and pictures appear as black and white  
outlines.  
• Off  
• Negative — Subjects and pictures appear in inverted colors.  
• On  
• Sepia — Subjects and pictures appear in a brownish-gray hue.  
75  
 
2. Select the automatic save setting of your choice. You’re  
appear in the display:  
returned to the camcorder viewfinder screen.  
• Off  
Start Sound  
• Beep  
• OK  
Choose from two different sounds whenever you begin video  
recording. Aside from being a cool sound effect, Start Sound acts  
as an audible reminder that your camcorder has begun recording  
a video.  
• Melody  
2. Select the desired end sound. You’re returned to the  
camcorder viewfinder screen.  
1. In camcorder mode, press the Settings button, then select  
Common Tab Start Sound. The following Memory  
options appear in the display:  
Brightness  
Brightness lets you temporarily lighten the videos you record.  
Increasing the Brightness (-4 – +4) lightens your videos (  
normal).  
0
is  
• Off  
• Beep  
1. In camcorder mode, press the Brightness button. The  
• Look Here!  
• 1,2,3!  
horizontal Brightness scale appears in the display.  
2. To increase Brightness (brighten your picture), press the  
+
2. Select the desired start sound. You’re returned to the  
button. To decrease Brightness (darken your picture), press  
the button.  
The next time you press the Camera key (  
camcorder viewfinder screen.  
-
End Sound  
), the  
Choose from two different sounds whenever you stop video  
recording. Aside from being a cool sound effect, End Sound acts  
as an audible reminder that your camcorder has stopped  
recording a video.  
camcorder records a lighter or darker image according to  
your selected Brightness setting.  
1. In camcorder mode, press the Settings button, then select  
Common Tab End Sound. The following Memory options  
Camera-Camcorder  
76  
 
Zoom  
4. To delete selected unlocked pictures from the My Images  
folder, press the Erase soft key. Locked pictures must be  
unlocked before you can erase them.  
Zoom lets you temporarily enlarge the pictures you take.  
Increasing the Zoom (1 – 9) enlarges your pictures or videos (0 is  
normal).  
5. For more options, press the More soft key. The following  
additional options pop-up:  
1. In camcorder mode, press the Volume key (on the left side  
of the phone) up or down. The horizontal Zoom scale  
appears in the display.  
• Camera — Launches the camera.  
• CANVAS — Lets you overlay a selected image with drawing(s) or  
handwriting, then save it and send it in a Picture message.  
2. To Zoom in on a subject, press the Volume key down.  
• Move Transfer one or more images to an optional Memory  
Card.  
3. To Zoom out from a subject, press the Volume key up.  
The next time you press the Camera key (  
), the  
• Copy — Save a copy of one or more images to an optional  
Memory Card.  
camcorder records an enlarged image according to your  
selected Zoom setting.  
• Lock/Unlock — Prevent/allow erasure of one or more images.  
• Print — Print one or more images on a Bluetooth-compatible  
printer.  
The Photo Gallery  
Saved pictures are stored in the My Images folder. You can  
browse the pictures one at a time (expanded mode), or view  
several pictures at once in thumbnail format.  
6. To view an image, select it. While viewing an image, you  
have the following options:  
To send the image in a Picture message, press the Send soft key.  
1. In the Camera viewfinder screen, press the Gallery button.  
Any pictures that you’ve saved are listed with their  
thumbnail images in the display.  
To assign the image as the standby screen Wallpaper or as a  
Picture ID for someone in your Contacts list, press the Set As soft  
key.  
2. Press and slide to browse pictures in the gallery.  
To access more options, press the More soft key. The following  
additional options pop-up:  
3. To send the currently displayed or highlighted picture as a  
Picture message, press the Send soft key.  
Camera — Launches the camera.  
77  
       
Erase — Deletes the image from the My Images folder, provided the  
image is unlocked.  
3. Using the display as a viewfinder, take the desired picture  
or record the desired video by pressing the Camera key  
Move to Card Transfer this image to an optional Memory Card.  
(
), and then pressing the Stop button ( ) to stop  
Copy to Card — Save a copy of this image to an optional Memory  
Card.  
video recording.  
The photo/video review screen appears in the display.  
Rename — Rename the currently displayed or highlighted picture.  
4. Press the Send button, then select Picture Message or  
Lock / Unlock — Lock the currently displayed or highlighted picture  
so that it cannot be deleted, or unlock the picture so that it can be  
deleted.  
Video Message  
.
The Picture Msg or Video Msg screen appears in the  
Print — Print the image on a Bluetooth-compatible printer.  
display.  
Slide Show — Show the images as a full screen slide show.  
5. Enter the recipient’s phone number or email address using  
Image Info — View the Title, time and date created, size, and  
resolution of the currently highlighted or displayed picture.  
the keypad.  
6. Press the Done soft key to save the address(es).  
7. Select the desired option to perform its function or to enter  
its sub-menu.  
7. Press the Next soft key to move to the Subject field. Select  
the other message fields as needed. For more information,  
Point, Click, and Send Pictures and Videos  
Take a picture or record a video and send it to anyone with a  
compatible device in a few easy steps.  
8. When you are finished composing your message, press  
Send soft key to send the Picture or Video message to the  
intended recipient(s).  
1. In Camera mode, press and hold the Camera key (  
on the right side of the phone. The camera view finder  
screen appears in the display.  
)
2. If desired, press the Mode button. The camcorder view  
finder screen appears in the display.  
Camera-Camcorder  
78  
   
Section 11: Music Player  
Music Player lets you play music files (such as, CMX, MIDI, MP3,  
AAC, AAC+, and eAAC+) stored on a Memory Card.  
Music Player Controls  
1. Music Library button  
This section describes your phone’s Music Player functions and  
key features associated with multimedia.  
Launches the  
Music Library  
menu.  
AccessingtheMusicPlayer  
Note: A microSD Memory Card must be  
installed for the Music Player to  
2. Selection Information  
area — Shows album  
cover image, selection  
title/file name, artist, and  
album name, if available.  
In Standby mode, press the  
Menu soft key, then select  
Music Player. The Music  
Player screen appears in the  
display.  
3. Equalization and  
Repetition controls — Set  
the equalization (Normal Rock, Jazz, or Classic), repetition,  
,
and stereo/mono.  
Playsthrougheachsongontheplaylistonetime.  
Plays and replays one song until you press Stop  
or Pause.  
79  
     
Plays all songs in the Playlist and then replays  
until you press Stop or Pause.  
Changes playback to next music file in playback  
list.  
Plays songs at random, that is, in no particular  
order.  
Music Player Soft Keys  
Details — Launches the Details screen which shows Title, Artists,  
Album s, Genre, File Name, Encoding Format, Bitrate, Duration, File  
Size, and Date for the music file currently playing.  
Home — Closes the Music Player screen and returns to Standby  
mode.  
Plays songs in the listed order.  
4. Progress bar — Indicates progress of playback.  
5. Elapsed Time and Total Time — Show how many hours,  
minutes, and seconds of the music file have been played  
and shows how long the music file is in hours, minutes,  
and seconds.  
Browsing for a Music File to Play  
To select a music file to play:  
1. From the Music Player screen,  
press the Music Library  
6. Playback controls  
button (  
) in the upper  
Mutes music file playback.  
left corner of the screen.  
The Library screen appears in  
the display listing the  
following options:  
Changes playback to previous music file in  
playback list.  
Starts/resumes music file playback.  
• Now Playing List — Lists you  
most recently played Playlist.  
Pauses music file playback.  
• AllTracks— Lists all music files  
stored in the My Music folder on a microSD Memory Card by their  
file names.  
Music Player  
80  
• Playlists — Lists any music file Playlist(s) you have created.  
4. Enter the first few characters  
of the file, Playlist, artist, or  
• Artists — Lists all available recording artists names with music  
files stored on a Memory Card.  
• Albums — Lists all available album titles for music files stored on a  
Memory Card.  
5. Press the Done soft key. A list  
of the files, Playlists, artists,  
or albums with names that  
match your text entry appears  
in the search screen.  
2. Select the music file group you wish to access. A list of  
music files appears in the display.  
3. To play a music file, select the file. The Music Player screen  
appears in the display and the selected file begins playing.  
4. To add a file to a Playlist, press the Add to Playlist soft key.  
6. Select the file you wish to  
play. The Music Player screen  
appears in the display and the  
selected file begins playing.  
The Add Songs screen appears in the display.  
Select a music file to add to a Playlist. A check mark appears in the  
check box for that file.  
Press the Save soft key.  
Searching for a Music File to Play  
1. From the Music Player screen, press the Music Library  
button in the upper left corner of the screen. The Music  
Library screen appears in the display.  
2. Select the music file group you wish to access. A list of  
music files appears in the display.  
3. Select the <Tab Here To Find> field. The 3X4 Keypad screen  
appears in the display.  
81  
Section 12: Multimedia  
This section outlines your phone’s multimedia functions and key  
features associated with multimedia.  
My Images  
My Images lets you choose the pictures that appear in your  
phone’s display while in Standby mode (wallpaper) and as picture  
IDs for your contacts.  
Accessing Multimedia  
1. In Standby mode, press the Menu soft key, then select  
Multimedia. The following Multimedia sub-menus appear  
in the display:  
1. From the Multimedia menu, select My Images  
.
If there are no pictures stored in your phone or on a  
memory card, “Empty” appears in the My Images screen.  
[To launch the camera to take a picture, press the More  
soft key and select the Camera option. (For more  
• Camera — Lets you launch and set up your phone’s camera. (For  
• Camcorder — Lets you launch and set up your phone’s  
If there are pictures stored in your phone or on an optional  
Memory Card, up to seven thumbnail images of your  
pictures appear in the display.  
• My Images — Lets you choose the multi-media or pictures that  
appear in your phone’s display.  
• My Videos — Lets you choose the videos that appear in your  
phone’s display.  
Tip: You can also access My Images from:  
• My Ringtones — Lets you assign melody tones for calls, alarms,  
-The Camera screen, by selecting the Gallery button.  
and other alerts.  
-The Edit Contact screen, by selecting the picture ID field and then  
selecting the My Images option.  
• My Sounds — Lets you assign melody tones for calls, alarms, and  
other alerts.  
2. Select a sub-menu to launch it. The following sections  
2. Select a picture to enlarge it for easier viewing.  
describe the above listed sub-menus in greater detail.  
3. To send the selected image to a specified recipient in a  
Picture message, press the Send soft key.  
Multimedia  
82  
         
4. To assign the selected picture as the Picture ID for a  
Contact, or as the Wallpaper for the Standby mode screen,  
press the Set as soft key.  
1. From the Multimedia menu, select My Videos.  
If there are no videos stored in your phone or on a memory  
card, “Empty” appears in the Videos screen.  
5. Press the More soft key. A pop-up menu containing the  
following options appears in the display:  
If there are videos stored in your phone or on an optional  
Memory Card, the Videos screen appears showing a list of  
up to seven videos with thumbnail images.  
• Camera — Lets you take additional photos.  
• Erase — Deletes the selected image.  
To view the Videos Gallery as an array of thumbnail images, press  
.
• Move to card  
/
phone — Lets you move the picture from the  
phone to a memory card or from a memory card to the phone.  
To return to the list of Videos and thumbnail images, press  
.
• Copy to card phone — Lets you save a copy the picture to the  
/
2. To play a video, select it. The  
Video Player screen appears  
in the display and begins  
phone or to a memory card.  
• Rename — Lets you rename the image.  
playing the highlighted video.  
• Lock Unlock — Prevents/allows deletion of the image.  
/
3. To send a video as part of a  
video message, press the  
Send soft key. (For more  
information, refer to “Creating  
and Sending a Video  
• Print — Lets you print the image to a Bluetooth-compatible printer.  
• Slide Show — Lets you view the images in the My Images folder  
as a slide show.  
• Image Info — Displays information about the image, such as the  
file Name, creation Date and Time Resolution, and the data Size.  
,
6. Select the desired option.  
4. To delete one or more video  
clips from the My Videos  
folder, press the Erase soft  
key.  
My Videos  
My Videos lets you take videos, review your videos, send them as  
video messages, and assign your videos as wallpaper on your  
phone.  
83  
 
5. To move a video from the phone to a Memory Card or from  
3. To delete one or more video clips from the My Videos  
a Memory Card to the phone, press the Move soft key.  
folder, press the Erase soft key.  
6. To take a new video, press the More soft key and select the  
Camcorder option. The camcorder view finder screen  
4. To view the video in the largest size possible, rotate the  
handset counter-clockwise or press the Full Screen soft  
key.  
7. For more My Videos options, press the More soft key. The  
following options appear in the display:  
• Camcorder — Lets you record a new video clip.  
• Copy — Lets you save a copy of a video to phone memory or to a  
Memory Card.  
• Lock / Unlock — Lets you block/permit deletion of a video.  
8. Select the desired option.  
5. For more Video Player options, press the More soft key. The  
following options appear in the display:  
Video Player  
• Camcorder — Lets you record a new video clip.  
Your phone includes a Video Player capable of playing 3gs and  
MP4 video files. To launch the Video Player:  
• Move to card  
/
phone — Lets you move a video between a  
Memory Card and phone memory.  
1. From the Videos screen, select a video. The Video Player  
screen appears in the display and the selected video  
begins playing.  
• Copy to card phone — Lets you copy a video to a Memory Card  
/
or to phone memory.  
• Rename — Lets you change the name of this video clip.  
• Lock / Unlock — Lets you protect the video from being deleted.  
2. To send a video as part of a video message, press the Send  
Multimedia  
84  
 
• Video Info — Displays information about the video, such as the  
video Name, creation Date and Time Resolution, data Size, and  
the Duration  
• Ringtone — Lets you assign the selected ringtone to incoming  
,
voice calls.  
.
• Contact ID — Lets you assign the selected ringtone as the  
distinctive ringer for a Contact.  
6. To select another video for playback, press  
in the  
upper left corner of the screen.  
• Alert Tone — Lets you assign the selected ringtone to All  
Messages  
,
TXT Message, Picture-Video Message, or Voicemail  
My Ringtones  
My Ringtones lets you assign ringtones (preloaded and  
downloaded) for calls, alerts, and as distinctive ringers for  
Contacts.  
Message  
.
4. Select the desired option.  
5. When using a downloaded ringtone, you can select the  
following options:  
1. From the Multimedia menu, select My Ringtones. A list of  
• Send Via BT— Send the ringtone via a Bluetooth device.  
ringtones appears in the display.  
• Erase — Erases the selected file or all downloaded ringtones.  
Tip: You can also access My Ringtones from:  
• More — Pops-up the following additional options:  
-An Alarm screen by selecting the Alarm Tone option.  
Lock / Unlock — Lets you prevent/permit file deletion.  
Ringtone Info — Displays information about the selected file, such as  
the file name, the file type, and the data size.  
-The Edit Contact screen by selecting the  
option.  
2. When accessing My Ringtones from an Alarm or a Contact,  
select a particular ringtone. A dot appears in the selected  
ringtone’s radio button, and the ringtone plays once.  
6. Select the desired option.  
My Sounds  
My Sounds lets you record voice memos and lets you assign  
preloaded and downloaded sound files as ringers for calls,  
alarms, and other alerts.  
To assign the marked ringtone to the Alarm or Contact, press the  
Set soft key.  
3. When accessing My Ringtones from the Multimedia menu,  
assign the highlighted ringtone by pressing the Set As  
button. The following options appear in the display:  
1. From the Multimedia menu, select My Sounds. The My  
Sounds menu appears in the display, along with the follow  
options:  
85  
   
• Record New — Lets you record a new sound file.  
• Erase — Erases one or more sound files.  
• Send — Lets you send the selected sound file to a specified  
recipient in a Picture message.  
• Set As — Lets you assign the selected sound file as the Ringtone  
or as the Contact ID for a Contact or an Alert Tone for Text, Picture,  
or Voicemail messages.  
• Lock/Unlock — Lets you protect the sound file from being deleted.  
Tip: You can also access My Sounds from:  
• More  
-A Set Alarm screen by selecting the Alarm Tone option, then pressing  
Erase — Erases one or more sound files.  
the My Sounds soft key.  
Rename — Lets you rename the sound file.  
-The Edit Contact screen by selecting the  
Sounds soft key.  
option and pressing the My  
Lock / Unlock — Lets you protect the sound file from being deleted.  
Sound Info — Displays information about the sound file, such as Title,  
2. Select a file. The Sound Player screen appears in the  
File Size, File Type, Date and Time.  
display, and the selected sound file begins to play.  
3. Select the desired option.  
For a preloaded sound file, the following options appears in  
the display:  
Voice Memo  
You can use your phone to record voice memos and other sound  
files for later playback or assignment as ringers. (For more  
• Record New— Lets you record a new sound file.  
• Send — Lets you send the selected sound file to a specified  
recipient in a Picture message.  
• Set As — Lets you assign the selected sound file as the Ringtone  
or as the Contact ID for a Contact or an Alert Tone for Text, Picture,  
or Voicemail messages.  
Note: The maximum length for a single voice memo is 60 seconds.  
You can save as many voice memos as will fit in the empty  
memory capacity.  
• Sound Info — Displays information about the sound file, such as  
the file name, file type, and the data size.  
Record a Voice Memo  
For a downloaded sound file, the following options appear  
in the display:  
1. From the Multimedia menu, select My Sounds  
New  
Record  
.
• Record New— Lets you record a new sound file.  
Multimedia  
86  
       
2. Select Until Memory Full or Limit for Message  
.
3. Press the Erase soft key. The “Select to erase” screen  
appears in the display.  
The Voice Memo screen appears in the display.  
4. Select the voice memo you wish to erase, then press the  
3. Press REC, then start speaking. As it is recording the phone  
displays a countdown timer that shows the seconds  
remaining for the recording.  
Erase soft key.  
Erase All Voice Memos at One Time  
To pause the memo, press the Pause soft key. When a memo is  
paused, select Rec to continue recording.  
1. From the Multimedia menu, select My Sounds. A list of  
sound files appears in the display.  
4. Press Stop once you’re finished recording. The new  
recording is saved, and the Standby mode screen appears  
in the display.  
2. Use the navigation keys to highlight a voice memo.  
3. Tap the Erase soft key.  
4. Tap Select All. A check mark appears next to the option.  
5. Tap the Erase soft key again.  
Review Voice Memos  
If you’ve saved any voice memos, you can review them anytime.  
1. In Standby mode, press Menu, then select Multimedia  
My Sounds. A list of sound files appears in the display.  
2. Select the voice memo you wish to review. The memo  
begins to play.  
To stop the memo, press Pause  
.
When the voice memo finishes playing, the selected voice  
memo remains highlighted in the list of sound files.  
Erase One Voice Memo  
1. In Standby mode, press Menu, then select Multimedia  
My Sounds. A list of sound files appears in the display.  
2. Highlight the voice memo you wish to erase.  
87  
     
Section 13: Tools  
This section explains how to use your phone’s digital assistant  
functions to view today’s calendar, schedule events, set  
reminders, perform calculations, and more.  
Voice Commands  
To access the Voice Commands menu:  
1. In Standby mode, press and hold the Voice Recognition key  
Accessing Your Phone’s Tools  
(
), on the right side of the phone.  
To launch the Tools menu:  
– Or –  
In Standby mode, press the Menu soft key, then select  
Tools. The Tools menu appears in the display.  
From the Tools menu, select Voice Service  
Commands  
Voice  
.
Voice Service  
Tip: You can also set your phone to start VoiceSignal when you connect an  
Your device includes state-of-the-art voice recognition software  
that lets you use your voice to dial numbers, access your  
Contacts list, and open Tools. To access your phone’s voice  
recognition, do the following:  
Say a Command” appears in the display and is  
pronounced through the earpiece, followed by a list of  
available commands:  
1. At the Tools menu, select Voice Service. The following  
options appear in the display:  
• Voice Commands — Lets you place calls, access your Contacts  
List, review your appointments, and more by speaking commands  
into your phone. (Also see “Using Voice Dial” on page 20 and  
see “Voice Method” on page 36 for more information.)  
• Call — Lets you dial the phone by saying any name stored in your  
contact list, without ever having to record, or “train” that name.  
VoiceSignal automatically voice-activates all your contacts, even if  
you have hundreds of them stored on your phone. You can also dial  
any telephone number, even if it is not stored in your contact list, by  
saying the digits in the number. (For more information, refer to  
• Voice Settings — Lets you tailor VoiceSignal to better respond to  
your voice and your phone use preferences. (For more information,  
• Send Text — Lets you access Create Text Message.  
2. Select the desired sub-menu.  
Tools  
88  
         
• Send Picture — Lets you access Create Picture Message.  
If VoiceSignal still does not recognized the command, it  
tells you “No match found” and offers you the option of  
selecting Settings or Repeat before canceling voice  
recognition.  
• Lookup — Lets you find a Contact by name and review the  
Contact’s information.  
• Go to — Lets you access the following list of your phone’s features  
and functions:  
Voice Command Tips:  
Contacts  
Calls  
Multimedia  
Messaging  
easyedgeSM  
Camera  
Make sure you wait for the beep and/or “Listening ...” pop-up before  
speaking.  
Speak clearly at a normal volume, as if you were talking on the phone.  
Voice Settings  
Confirmation  
Tools  
You can select whether and when VoiceSignal asks for  
confirmation of your responses when using the Call command.  
Music Player  
Calendar  
Settings  
Alarm  
1. From the Tools menu, select Voice Service  
Voice Settings  
Confirmation. The following options appear:  
• Automatic— Voice Service asks for your confirmation only when it  
is not sure if it has correctly recognized the name or number.  
Calculator  
• Check — Lets you say a single command (such as “Status”) to  
verify your phone's: Status Signal Strength Network Battery, or  
My Phone Number  
• Always Confirm — Voice Service always asks for your  
confirmation.  
,
,
,
.
• Never Confirm — Voice Service never asks for your confirmation.  
2. Speaking clearly, say the command that you want to use.  
If VoiceSignal does not recognize a command, it prompts  
you to repeat the command.  
2. Select your preferred setting.  
89  
     
3. To save your selection, press the OK soft key. To discard  
Only use Adaptation if you are regularly having problems with Voice  
Service. Once you adapt Voice Service, it will not work as well for other  
people using your phone. (You can always reset Voice Service to its  
original state, as described below.)  
the new setting, press  
. You are returned to the Voice  
Settings menu.  
Adaptation  
Adapt Voice  
If you regularly have trouble with Voice Service not recognizing  
the commands, names, and/or numbers you say, try adapting  
Voice Service to your voice. Adapting can improve the accuracy  
of Voice Service responses, especially for people with strong  
regional accents.  
To adapt Voice Signal to your voice, do the following:  
1. From the Tools menu, select Voice Service  
Adaptation. The Adaptation screen appears in the  
display showing the Adapt Voice option.  
Voice Settings  
2. Select Adapt Voice. Your phone displays text describing the  
Note: After you adapt Voice Service, it is customized to your voice, and your  
voice only. Others will not be able to use your Voice Service on your  
phone unless they reset it to factory defaults.  
Adapt Digits process.  
3. Press the Start soft key. Your phone displays the first  
phrase or digit sequence and says “Please say” through  
the speaker followed by the phrase or digit sequence  
appearing in the display.  
Adaptation involves recording your responses to several  
sequences of phrases. The recording process takes a couple of  
minutes.  
4. Wait for the beep and say the phrase or digits using your  
normal tone of voice. Adaptation continues the recording  
process with the next phrase or set of digits.  
Tips for Adapting Voice Service:  
Use Adaptation in a quiet place.  
Do not use a headset during Adaptation.  
Make sure you wait for the beep before starting to speak.  
Speak clearly, and say each phrase distinctly.  
After 15 phrases and sets of digits, adaptation ends and  
your are returned to the Adaptation screen.  
Reset Voice  
If you make a mistake while recording a phrase, or if there is an  
unexpected noise that spoils the recording, re-record that phrase.  
To reset Voice Service to factory default settings, do the  
following:  
Tools  
90  
 
Voice Launch  
1. From the Tools menu, select Voice Service  
Voice Settings  
Adaptation Reset Voice. The phone prompts you to  
To set the key or action that launches Voice Service, do the  
following:  
confirm voice adaptation reset.  
2. Press the Yes soft key to reset your voice adaptation, or  
1. From the Tools menu, select Voice Service  
Voice Launch. The following options appear in the  
display:  
Voice Settings  
press the No soft key to keep your voice adaptation.  
Modes  
• Key Only — Press and hold the Voice Recognition key (  
) to  
Modes lets you specify whether Voice Service is to read prompts  
and/or on-screen text to you when you are using your phone’s  
menus.  
activate Voice Service.  
• Key/EarMic — Attach a headset to your phone. Press and hold the  
Voice Recognition key (  
to activate Voice Service.  
) or press the button on the headset  
1. From the Tools menu, select Voice Service  
Voice Settings  
Modes. The following options appear in the display:  
2. Select the preferred setting.  
• Expert Mode — Voice Signal plays a beep when it requires  
information from you.  
3. Press the OK soft key to accept the new setting. Press  
to discard the new setting and return to the Voice  
Settings menu.  
• Prompt Mode — Voice Signal plays audio prompts for required  
information.  
About  
• Readout Mode — Voice Signal reads on-screen text and plays  
audio prompts for required information.  
This option displays version and build information about the Voice  
Service software included on your phone.  
2. Select the preferred setting.  
3. Press the OK soft key to accept the new setting. Press  
to discard the new setting and return to the Voice  
Settings menu.  
From the Tools menu, select Voice Service  
About  
Voice Settings  
.
The About screen appears in the display showing the  
version level of the Voice Service software currently  
installed on your phone.  
91  
 
Turn Bluetooth On  
Bluetooth  
1. From the Tools menu, select  
Bluetooth. The Bluetooth  
screen displays.  
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection.  
2. Press the Turn On soft key.  
Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of  
one another, you can exchange information between them, even  
if they are located in different rooms.  
Bluetooth Power On” pops-up  
in the display.  
The blue Bluetooth On icon  
(
) appears on the status bar.  
The Bluetooth wireless technology settings menu provides the  
ability to view and change the device name, show the visibility,  
and set the security for the device.  
The SEARCH button becomes  
highlighted in blue.  
Turn Bluetooth Off  
Turn Bluetooth On/Off  
1. From the Tools menu, select  
When the Bluetooth is turned on, you can use the Bluetooth  
features available. When the Bluetooth is turned off, you cannot  
send or receive information via Bluetooth. To save battery life or  
in situations where Bluetooth use is prohibited, such as airline  
traveling, you can turn off the Bluetooth wireless technology  
headset.  
Bluetooth. The Bluetooth screen displays.  
2. Press the Turn Off soft key. “Bluetooth Power Off” pops-up  
in the display, the SEARCH button highlighting disappears,  
and the blue Bluetooth On icon ( ) disappears from the  
status bar.  
Tools  
92  
     
Add New Device  
The Device Info screen appears in the display, showing the  
selected device’s name, Type, Status, and Address.  
Searching for Available Bluetooth  
Devices  
5. Return to the Bluetooth screen by pressing the OK soft key.  
1. From the Tools menu, select  
Bluetooth. The Bluetooth  
screen displays.  
6. Press, hold, and slide the identified icon to overlap the  
SEARCH button. You are prompted to enter the passkey or  
PIN for the selected device.  
2. Place the Bluetooth device  
you want to pair with your  
device in discoverable mode.  
(See the device user manual  
for more information.)  
7. Enter the device passkey or PIN and press the Done soft  
key. (See the device user manual for more information.)  
Pop-up messages appear and the SEARCH button and  
selected device icon are highlighted in blue to inform you  
that pairing with the device and connecting to it are  
complete.  
3. Press the SEARCH button.  
Note: If Bluetooth is off, it automatically  
Note: If you are pairing and connecting to another phone or to a personal  
computer, both devices prompt for a passkey or PIN. To successfully  
pair and connect your phone with the other device, the same passkey  
or PIN must be entered on both devices.  
turns on.  
Your phone searches for available Bluetooth devices.  
Named icons for available devices appear in the display.  
Note: When more than 5 devices are detected, additional icons are placed on  
additional Bluetooth screen pages.  
4. Identify the device you want to pair with your phone by  
selecting an icon.  
93  
 
Paired Icons  
2. Select Disconnect. The device icon’s blue highlighting  
disappears.  
The Bluetooth screen shows the  
icons for Bluetooth wireless  
technology devices paired with your  
handset.  
Managing Your Paired Icons  
1. In the Bluetooth screen, press a device icon. A device  
options list pops-up. The following options appear in the  
display:  
1. From the Tools menu, select  
Bluetooth. Icons for  
Browse files— Lets you browse files on the device.  
registered Bluetooth devices  
appear in the display.  
Send files— Lets you send files to the device.  
Rename — Lets you change or replace the device name, as  
needed.  
Connecting to a Bluetooth Device  
Remove — Deletes the device from the Bluetooth screen.  
1. In the Bluetooth screen,  
press, hold, and slide the icon  
for the preferred device to  
• Service list — Lists the Bluetooth services supported by your  
device.  
overlap the SEARCH button. The SEARCH button and the  
device icon flash and are highlighted in blue to indicate the  
connection is complete.  
Device Info — Shows the device name, Type of device, Status,  
and device Address.  
2. Select the desired option.  
2. If you are unable to connect with the device a pop-up  
appears in the display. Press, hold, and slide the selected  
icon to overlap the SEARCH button again.  
Bluetooth Settings  
1. To access your phone’s Bluetooth settings, in the Bluetooth  
screen, press the Settings soft key. The Phone Settings  
screen appears in the display showing the following  
options:  
Disconnecting from a Bluetooth Device  
1. In the Bluetooth screen, press the device icon. A device  
options list pops-up.  
• My Phone’s Name — Shows your device’s name. You may  
change this name. Just select the name and enter your text  
changes.  
Tools  
94  
 
• Discovery Mode — Allows other Bluetooth devices to see your  
device as accessible. Select On for other devices to see your  
device, or Off for no visibility.  
• Left/Right buttons — Moves the date and screen back/ahead one  
month per keypress.  
• Goto soft key — Select a particular date.  
• Address — Shows the Bluetooth Address of your phone. (This  
address is not changeable.)  
Add a New Event  
1. From the Tools menu, select Calendar  
.
2. To save your changes, press the Save soft key. Press  
The calendar appears in the display with the current date  
highlighted. The month and year appear at the top of the  
display.  
to discard your changes and return to the Bluetooth screen.  
Calendar  
Calendar lets you view the current,  
past, or future month in calendar  
format. While viewing the calendar,  
the current date is highlighted, and  
days with scheduled events are  
surrounded by a box.  
2. Highlight the desired date. (For more information, refer to  
3. Press the New Event soft key. The New Event screen  
appears in the display.  
4. Enter the event Title. (For more information, refer to  
Navigating the Calendar  
1. From the Tools menu, select  
5. Select each of the following New Event options:  
Calendar  
.
• Start Date — Populated with highlighted Calendar date. Select the  
date this event begins.  
The calendar appears in the  
display with the current date  
highlighted. The month and year appear at the top of the  
display.  
• Start Time — Populated with the current time (rounded to the  
nearest half-hour). Select the time this event begins.  
• Alarm — Select Off  
Before 1 Day Before  
particular number of minutes, hours, or days before the Start Date  
and Start Time)  
/
10 Mins Before  
/
30 Mins Before  
/
1 Hour  
/
/
1 Week Before  
/
Customize (select  
2. Use the following controls to display a particular month  
.
and to highlight a particular date in the Calendar screen:  
95  
       
6. For additional New Event options, press the Set Details soft  
2. Navigate to and select a desired date. (For more  
page 95.) The calendar is replaced by the Daily View for  
the selected date, listing all events scheduled for this date.  
key.  
• End Date — Populated with highlighted Calendar date. Select the  
date this event ends.  
• End Time — Populated with a time one half-hour later that Start  
Time. Select the time this event ends.  
3. Select an Event to view. The current settings for the  
selected Event appear in the display in a scrollable list.  
• Details — Add details about the event.  
To change the event details, press the Edit soft key. (For more  
• Location — Add location of the event.  
To remove the event from the calendar, press the Erase soft key.  
(You are prompted to confirm the erasure.)  
• Alarm Tone — Select a ringtone from My Ringtones, buy a  
ringtone on-line, or select a sound file from My Sounds. When you  
select a ringtone or sound, it plays.  
To return to the Daily View list, press  
.
• Repeat — Select Off  
Every Year  
/
Every Day  
/
Every Week  
/
Every Month  
/
4. For other options, press the More soft key. The following  
.
options appear in the display:  
7. Press the Save soft key to save your additional details  
• MonthlyView — Returns you to the Calendar screen, showing the  
current month.  
settings.  
8. To store this Event in your Calendar, press the Save soft  
• Weekly View — Returns you to the Calendar screen, showing the  
current week.  
key. An alarm will notify you before the start of this Event,  
if Alarm is set to a value other than Off  
.
• Daily View — Returns you to the Calendar screen, showing  
today’s schedule.  
View/Change an Event  
• Erase — Remove this event from the Calendar.  
1. From the Tools menu, select Calendar  
.
5. Select an option to invoke its function.  
A calendar appears in the display with the current date  
highlighted. The month and year appear at the top of the  
display.  
Tools  
96  
Review, Edit, Erase, and Send Memos  
Memo Pad  
1. From the Tools menu, select Memo Pad. A list of any stored  
Create notes and store them in  
Memo Pad. Notes that you create in  
Memo Pad can’t be prioritized or  
assigned an alert. Return to Memo  
Pad anytime to review and edit your  
notes.  
Memos appears in the display.  
2. To review a Memo, select it. The text of the Memo appears  
in the display in a scrollable screen.  
3. To edit a Memo, select it and press the Edit soft key. The  
Memo text appears in a text entry screen. (For more  
Create a Memo  
To save your changes and return to the Memo Pad screen, press  
1. From the Tools menu, select  
Memo Pad. A list of any stored  
Memos appears in the  
display.  
the Done soft key.  
To discard your changes and exit Memo Pad, press Erase. You are  
prompted to confirm your wish to exit Memo Pad.  
4. To erase a Memo, select it and press the Erase soft key.  
2. To add a Memo, press the  
New Memo soft key. A blank Memo screen appears in the  
display.  
You are prompted to confirm the erasure.  
5. To send a memo as a text message, select the memo, then  
press the Send text message soft key. The memo text  
appears in the Text Msg screen as part of the message  
text.  
4. When you’re finished entering details for the Memo, press  
Alarm Clock  
the Done soft key.  
Your phone has three alarm clocks that you can set to go off  
once, or to recur daily at a specific time. Once set, an alarm clock  
is easy to change or turn off completely.  
5. Press Save. The Memo is saved.  
6. To discard this Memo, press Erase. You are prompted to  
confirm the erasure.  
97  
       
• Alarm Tone — Populated with Alert 1. To change, select this field,  
select the preferred ringtone in the My Ringtones screen, then  
press the Set soft key.  
Note: The Alarm Clock doesn’t function when the phone is turned off. If the  
time for an alarm that was set for Once has elapsed while the phone is  
off, the alarm sounds at the specified time on the next day.  
• Alarm Volume — Press and slide to set to the preferred volume.  
Set an Alarm  
• Snooze — Select On to enable snooze timer for this alarm, then  
select values for the following options:  
1. From the Tools menu, select  
Alarm Clock. The Alarm  
screen appears in the display,  
listing any currently set  
alarms.  
Snooze Duration — Select 1 min  
Snooze Repeat — Select Once Twice  
10 Times  
,
2 min  
,
3 min  
,
5 min, or 7 min  
.
,
,
3 Times,  
5 Times, or  
.
3. When you’re finished selection option values for the alarm,  
press the Save soft key. If the Alarm is set to On, the alarm  
2. Press the New Alarm soft key.  
The following Alarm options  
appear in the display:  
icon (  
) appears in the top of the display.  
When an Alarm Sounds  
• Alarm Name — Populated with  
the default name, Alarm. To  
change, select this field and  
enter a new name. (For more  
An animated alarm clock appears in the display and an alert  
sounds when the specified time for the alarm arrives.  
To silence the alarm, press and slide  
shown) or Stop  
to Snooze (if  
.
• Alarm Time — Populated with the current time. To change the  
time, select this field, select a new time, and press the Set soft key.  
• Alarm Repeat — Select the day(s) of the week (Sun Sat) on  
which this alarm is to sound. The alarm will sound every week on  
the day(s) selected.  
Tools  
98  
   
4. Press the Erase soft key. The selected Alarm is removed  
Note: If the alarm is set to repeat on one or more days, the alarm icon  
from the list.  
remains in the top of the display.  
World Time  
If the alarm was set as a once only alarm (no repeat day selected), the  
alarm icon disappears from the top of the display.  
World Time lets you set up to four  
clocks to the time of day or night in  
any of the 24 different time zones  
around the world.  
Turn Off an Alarm  
1. From the Tools menu, select Alarm Clock. The Alarm screen  
appears in the display, listing any currently set alarms.  
Note: To use World Time, you need to  
subscribe to your Wireless Provider’s  
digital service.  
2. Press the Off button on the Alarm you wish to turn off.  
Erasing an Alarm  
1. From the Tools menu, select  
Alarm Clock. The Alarm  
screen appears in the display,  
listing any currently set  
alarms.  
From the Tools menu, select  
World Time. A list of your  
selected clocks appears in  
the display. The following  
icons appear in the list:  
2. Press the Erase soft key. The  
Select to erase screen  
Indicates the clock set to your home (local) time.  
Indicates your 2nd clock.  
appears in the display.  
3. Select the check box for the  
Alarm you want to remove  
from the list. A check mark  
appears in the selected box.  
Note: Your Home and 2nd clocks also appear in the Clock widget. (For more  
99  
     
Enable Daylight Savings Time (DST)  
Setting a World Clock  
1. While viewing the World Time map, press the DST (  
soft key to toggle between standard time and daylight  
savings time.  
)
The default home clock is set to the  
time in London, England and is  
labeled “London”. To change this or  
another World Clock setting, do the  
following:  
2. Press the Add soft key to accept the highlighted setting. If  
the DST icon ( ) appears in the display, it indicates  
that Daylight Savings Time is enabled.  
1. From the Tools menu, select  
World Time. A list of your  
current World Clocks appears  
in the display.  
Adding a World Clock  
1. From the Tools menu, select World Time. A list of your  
current World Clocks appears in the display.  
2. Select the clock you wish to  
set to a new time zone. The  
Add City screen appears in  
the display.  
2. Press the Add soft key. The Add City screen appears in the  
display.  
3. Press and slide the map until you see the city whose time  
you wish to select as this clock’s new time.  
3. Press and slide the map until you see the city whose time  
4. Select the city. The displayed time changes to the time for  
you wish to select as this clock’s new time.  
the selected city.  
4. Select the city. The displayed time changes to the time for  
5. Press the Add soft key. Your choice is saved and you are  
the selected city.  
returned to the World Clock screen.  
5. Press the Save soft key. Your choice is saved and you are  
returned to the World Clock screen.  
Tools  
100  
Selecting Your 2nd Clock  
Calculator  
Your 2nd Clock and your Home Clock both appear in the Clock  
widget when you move it from the Widget Bar to the standby  
screen. By changing your 2nd Clock, you can quickly and easily  
keep track of the time in a new city and at home. (For more  
You can perform calculations,  
including addition, subtraction,  
multiplication, division, and  
percentages using your phone.  
1. From the Tools menu, select  
Calculator. The Calculator  
1. From the Tools menu, select  
World Time. A list of your  
current World Clocks appears  
in the display.  
screen appears in the display.  
2. Enter the first number in your  
calculation using the  
2. Press the Set as 2nd Clock  
calculator-style touch  
soft key.  
keypad. (Numbers can be up  
to 12 digits long, and can  
include a decimal point  
3. Select the World Clock you  
prefer as your 2nd Clock. The  
2nd check mark moves to  
your selection.  
followed by up to 3 more digits.)  
3. Select the desired operation. [You can nest calculations  
using parentheses “( )”. To delete your last entry, press  
.]  
4. Press the OK soft key. Your  
selection is saved.  
4. Use the keypad to enter the second number for your  
calculation.  
5. Press  
to perform the calculation and view the result.  
101  
   
Stop Watch  
Timer  
You can use this function to set a  
stop watch.  
This is a count down timer that can  
count down to an event up to 24  
hours in the future and sound an  
alarm tone with the count down  
time reaches 00:00:00.  
1. From the Tools menu, select  
Stop Watch. The Stop Watch  
screen appears in the display.  
1. From the Tools menu, select  
Timer. The Timer screen  
2. To start the Stop Watch count,  
press the Start soft key.  
appears in the display.  
3. To record succeeding event/  
lap times, press the LAP soft  
key at the start of each  
2. To set the Timer, select the  
time until the event in Hrs  
,
Min, and Sec  
.
succeeding event/lap to  
To start the Timer, press the  
Start soft key.  
record the completion time  
for the previous event/lap.  
To stop the Timer, press the Stop soft key.  
To reset the Timer to 00 00 00, press the Reset soft key.  
You can record up to eight event/lap times.  
:
:
4. To stop the Stop Watch count, press the Stop soft key.  
Converter  
5. To resume the Stop Watch count, press the Restart key.  
6. To erase all Stop Watch (lap) times recorded, press the  
The conversion menu provides the following conversion  
categories:  
Reset soft key.  
Currency  
Length  
Weight  
Volume  
Tools  
102  
         
Area  
Currency — Reviewing/Editing Exchange Rates  
Temperature  
The Currency Converter includes  
long-term average exchange rates  
as default values. To review and/or  
change a default exchange rate to  
the current exchange rate, do the  
following:  
Using Converters  
To convert a currency, length,  
weight, volume, area, or  
temperature, do the following:  
1. From the Tools menu, select  
Converter. The following list of  
converters appears in the  
display:  
1. From the Tools menu, select  
Converter  
Currency.  
2. Press the View Rates soft key.  
A list of exchange rates  
• Currency  
appears in the display.  
• Length  
3. Select the exchange rate you  
• Weight  
wish to change.  
• Volume  
4. Enter the changed exchange rate value.  
• Area  
5. Press the Done soft key to save the changed exchange  
Temperature  
rate.  
2. Select the conversion feature you wish to use.  
3. Press the down arrow key and select the units to be  
converted from.  
4. Enter the quantity you want converted in the field at the top  
of the screen. The converted quantities appear opposite  
their respective units of measure.  
103  
Currency — Adding Exchange Rates  
7. Highlight the exchange rate field.  
8. Enter a decimal exchange rate for the new currency using  
You can use the Currency Converter  
to convert from and to obscure  
currencies by adding exchange  
rates for these currencies. To add a  
currency and its exchange rate to  
the Currency Converter, do the  
following:  
the keypad.  
Note: The Exchange Rate field only accepts up to five digits after the decimal  
point.  
9. To add the new exchange rate to the list, press the Done  
soft key.  
1. From the Tools menu, select  
Currency — Erasing Exchange Rates  
Converter  
Currency.  
You cannot erase the preloaded  
currencies from the Exchange Rate  
list. You can erase a currency that  
you have added to the list by doing  
the following:  
2. Press the View Rates soft key.  
A list of exchange rates  
appears in the display.  
3. Use the left and right arrow  
buttons at the top of the list to display the base currency  
for the new exchange rate.  
1. From the Tools menu, select  
Converter  
Currency.  
4. Press the Add Rates soft key. A new line containing blank  
exchange rate fields appears at the bottom of the  
exchange rates list.  
2. Press the View Rates soft key.  
A list of exchange rates  
appears in the display.  
5. Select the currency identifier field.  
3. Select the user-added  
currency exchange rate to be  
erased.  
6. Enter an identifier of up to 4 characters for the new  
Tools  
104  
4. Press the Erase Rates soft key. The Erase screen appears in  
3. Tap the entry field to the left of the pull-down menu and  
the display.  
enter the number using the keypad.  
4. Press Done. The equivalent weights for each measurement  
Note: The Erase Rates soft key is undefined for preloaded Exchange Rates.  
appear in the display.  
This prevents you from erasing them.  
5. Press Reset to clear the numeric fields.  
5. Highlight the exchange rates that you want to erase, or  
highlight Select All to erase all the exchange rates that you  
have added.  
Volume  
1. From the Tools menu, select Converter  
Volume.  
2. From the pull-down menu, select the type of volume  
6. Press the Done soft key.  
measurement you want to convert.  
Length  
3. Tap the entry field to the left of the pull-down menu and  
1. From the Tools menu, select Converter  
Length.  
enter the number using the keypad.  
2. From the pull-down menu, select the type of length  
4. Press Done. The equivalent volume for each measurement  
measurement you want to convert.  
appear in the display.  
3. Tap the entry field to the left of the pull-down menu and  
5. Press Reset to clear the numeric fields.  
enter the number using the keypad.  
Area  
4. Press Done. The equivalent lengths for each measurement  
1. From the Tools menu, select Converter  
Area.  
appear in the display.  
2. From the pull-down menu, select the type of area  
5. Press Reset to clear the numeric fields.  
measurement you want to convert.  
Weight  
3. Tap the entry field to the left of the pull-down menu and  
1. From the Tools menu, select Converter  
Weight.  
enter the number using the keypad.  
2. From the pull-down menu, select the type of weight  
4. Press Done. The equivalent area for each measurement  
measurement you want to convert.  
appear in the display.  
105  
5. Press Reset to clear the numeric fields.  
Temperature  
2. Select the Bill field and enter the total amount of the bill.  
3. Select the Tip field and enter a tip percentage.  
4. Select the # Paying field and enter the number of persons  
1. From the Tools menu, select Converter  
Temperature.  
paying using the keypad.  
2. From the pull-down menu, select the type of temperature  
5. The amount of the Tip, the bill Total, and the amount Each  
measurement you want to convert.  
person should pay appear in the lower half of the screen.  
3. Tap the entry field to the left of the pull-down menu and  
enter the number using the keypad.  
4. Press Done. The equivalent temperature for each  
measurement appear in the display.  
5. Press Reset to clear the numeric fields.  
Tip Calculator  
Tip Calculator automatically  
calculates the following amounts:  
Gratuity (tip)  
Individual payment (for groups)  
Calculations are based on the total  
amount of the check, a selected  
gratuity percentage, and the  
number of people paying.  
1. From the Tools menu, select  
Tip Calculator. The Tip  
Calculator screen appears in  
the display.  
Tools  
106  
   
Section 14: Changing Your Settings  
This section explains how to customize your phone to suit your  
needs and preferences.  
Widget  
This function lets you select which  
optional widgets appear in the  
Widget Bar.  
Settings Menu  
To access the Settings menu, select Menu  
Settings. The  
Settings menu appears in the display.  
Location  
1. From the Settings menu,  
select Widget. The following  
options appear in the display:  
• Browser  
This function identifies your location to the network via the Global  
Positioning System (GPS). You can set this function for  
continuous operation or to operate only in the event that you dial  
911.  
• Email  
Note: Contact your Wireless Provider to determine whether, when, or where  
Your Navigator  
ToneRoom  
• easyedge  
• My Stuff  
location-based services are available.  
1. From the Settings menu, select Location. The following  
options appear in the display:  
• On — GPS location setting is on whenever you make or receive a  
call, wherever the feature is available.  
• Accuweather  
• MySpace  
• Facebook  
• Google Search  
• twitter  
• Off — GPS location setting is on only when you dial 911.  
2. Select the desired Location setting. You’re returned to the  
Settings menu.  
107  
           
YouTube  
Network Access  
• MSNBC  
To operate properly, the following online Widgets require access  
to your Wireless Provider’s network:  
• Access Hollywood  
• Send Message  
Top 5 Contacts  
• Mini Player  
• Images  
AccuWeather  
Google Search  
MSNBC  
Access Hollywood  
1. From the Settings menu, select Widget. The Widget screen  
• Calculator  
• Clock  
appears in the display.  
2. Press the Network Access soft key. The Network Access  
• Calendar  
• Date  
screen appears in the display.  
3. Select the Activation  
On setting.  
• Alarm  
4. Press the OK soft key.  
• Sketchpad  
• Help  
AccuWeather Setup  
The AccuWeather Widget, by default, indicates weather  
conditions in Washington, D.C. To change the AccuWeather  
Widget display to another location, do the following:  
2. To enable/disable a particular widget, select the associated  
option in the Widget screen. A check mark appears in/  
disappears from the option’s check box.  
1. Drag the AccuWeather Widget (  
) to  
3. To enable/disable all available widgets, select Select All  
/
one of the three home screens. The  
AccuWeather Widget becomes active, as  
shown.  
Unselect All. A check mark appears in/disappears from all  
the options’ check boxes.  
4. To save your new settings, select OK. You are returned to  
the Settings menu.  
Changing Your Settings  
108  
2. Press the weather display, and the detailed AccuWeather  
7. Press the Search button (  
). The  
information pop-up appears in the display.  
search results appear as an extension  
to the Location search pop-up.  
8. Use the arrow buttons at the bottom of  
the list to find the desired location,  
then press it. The AccuWeather  
Settings pop-up re-appears in the  
display with the selected location  
populating the Location field.  
3. To change the AccuWeather settings, press the Settings  
icon in the lower left corner of the pop-up. The  
9. Press the Save icon in the lower left corner of the  
AccuWeather Settings pop-up. The detailed AccuWeather  
information pop-up appears in the display with weather  
information from the new location.  
AccuWeather Settings pop-up appears in the display.  
4. To change the location of the weather, press the Location  
field. A Location search pop-up appears in the display.  
5. Press the Location field. A text entry screen appears in the  
display.  
10. Press the back arrow key in the lower right corner of the  
pop-up. The updated AccuWeather widget appears in the  
display.  
6. Enter the new location name and press Done. The Location  
search pop-up re-appears with the new name in the  
Location field.  
109  
2. Press the radio button to the right of a preferred picture or  
image to display when the phone is in Standby mode. The  
blue dot moves to this button.  
Display Settings  
Using the Display menu, you can set the menu style, set the  
Standby mode animation, customize the backlight settings, and  
more.  
3. To save your choice and return to the Display Settings  
menu, press the Set soft key.  
1. From the Settings menu, select Display Settings. The  
Banner  
following options appear in the display:  
• Wallpaper — Lets you choose the picture(s) that display(s) on your  
Create your own personalized greeting that appears in the  
display while your phone is in Standby mode.  
phone when in Standby mode.  
• Banner — Lets you create your own personalized greeting that  
appears in the display when your phone is in Standby mode.  
1. From the Settings menu, select Display Settings  
Banner.  
The Banner screen appears in the display.  
• Backlight — Lets you set backlight duration and brightness for  
your phone’s front display.  
Note: If necessary, press and hold  
to erase an existing banner.  
2. Select the desired sub-menu. The following sections  
2. Select the Banner field and enter a word or short phrase  
(up to 32 characters) to appear in your phone’s display  
describe the Display sub-menus in greater detail.  
Wallpaper  
Wallpaper lets you choose the pictures that appear as  
backgrounds in the three pages of your phone’s display while in  
Standby mode.  
3. Select the preferred Display setting: On (banner displays),  
Off (banner does not display).  
1. From the Settings menu, select Display Settings  
Wallpaper 1 Wallpaper. A scrollable list of  
thumbnail images appears in the display.  
4. Press the Save soft key to save the new/changed banner  
/
2
/
3
and return to the Display Settings menu.  
Backlight  
Set the duration and brightness of the backlight on your device.  
Changing Your Settings 110  
       
Backlight Time  
3. To save your new setting, press the Save soft key.  
Sounds Settings  
The Sounds Settings menu provides a variety of options to  
customize audio properties for such things as ringers, keypad  
tones alerts, and more.  
You can set the backlight for your display to remain on or off or to  
remain on for a specified period of time.  
Note: Prolonged backlight use drains your battery faster.  
Volume  
1. From the Settings menu, select Display Settings  
Backlight Backlight Time. The following options appear  
in the display:  
• 7 Seconds  
Volume lets you adjust the loudness of the sounds your device  
produces.  
1. From the Settings menu,  
• 15 Seconds  
• 30 Seconds  
select Sounds Settings  
Volume. The Volume screen  
appears in the display  
showing the following  
options:  
• Always On (this setting uses much more power than the timed  
settings)  
• Always Dim — Display is always on, but at reduced brightness.  
• Master Volume — Controls the  
loudness of all phone sounds.  
2. Select the desired Backlight Time setting.  
Brightness  
• Messages Volume — Controls  
the loudness of the ringtone  
played for incoming messages.  
Brightness lets you adjust the brightness of the backlight.  
1. From the Settings menu, select Display Settings  
Backlight Brightness. The Brightness screen appears in  
the display.  
Touch Volume — Controls the  
loudness of the tones produced  
when you touch the screen.  
2. To adjust the backlight brightness, press, hold, and slide  
2. Select the volume option you want to change. The  
the Level button left or right.  
associated Volume screen appears in the display.  
111  
       
3. Select the preferred Volume setting:  
• Pic/Video Message — Lets you set which ringtone or sound file  
plays when you receive a Picture Message or Video Message.  
High  
Low/Medium  
Low  
Vibrate only  
Alarm only  
Silence All  
• Voicemail — Lets you set which ringtone or sound file plays when  
you receive a Voicemail message.  
Medium/High  
Medium  
2. Select the desired option. A  
related, scrollable ringtones  
list appears in the display.  
1 beep  
4. To preview your new setting, press the Play soft key. To  
end the preview, press the Stop soft key.  
3. To assign a ringtone to the  
selected option, select a  
ringtone in the list.  
5. To retain your setting, press the Set soft key. Your are  
returned to the Volume screen.  
4. To assign a sound file to the  
6. To save your new settings and return to the Sound Settings  
selected option:  
menu, press the OK soft key.  
Press the down arrow in the  
upper right corner of the screen.  
Ringer Type  
You can assign ringer types and melody tones for calls, alarms,  
and other alerts, in the Ringer Type sub-menu.  
Select Sounds. A sound files list  
appears in the display.  
1. From the Settings menu, select Sounds Settings  
Type  
Ringer  
Select the preferred sound or  
record a new sound by pressing the Record New soft key. (For  
.
The following options appear in the Ringer Type display:  
5. To retain your selection and return to the Ringer Type  
• Voice Calls — Lets you set which ringtone, sound file, and/or one  
of a set of ringtones and/or sound files plays when you receive a  
voice call.  
screen, press the Set soft key.  
6. To save your new ringer settings and return to the Sound  
Settings menu, press the OK soft key.  
Text Message — Lets you set which ringtone or sound file plays  
when you receive a Text Message.  
Changing Your Settings  
112  
   
Alerts  
Tone Level — Set Key Tone level to High  
,
Medium/High,  
Medium Low/Medium Low, or Silence.  
,
,
You can set your phone to sound an alert whenever you enter or  
leave your service area, connect or disconnect a call, as well as  
other options.  
Tone Length  
:
Short — Default setting.  
Long — Select this option if you experience frequent misdialed  
1. From the Settings menu, select Sounds Settings  
Alerts.  
numbers.  
The following Alerts options appear in the display:  
2. To save your new setting and return to the Sound Settings  
• Minute Beep — Sounds an alert ten seconds before each elapsed  
menu, press the OK soft key.  
minute of a call.  
Vibrating Alert  
• Roaming — Sounds an alert when you leave your home service  
Vibrating Alert lets you set your phone to vibrate in sync with  
ringtones and melodies your phone plays.  
area during a call.  
• Call Connect — When you make a call, an alert sounds when the  
call is answered.  
1. From the Settings menu, select Sounds Settings  
Vibrating Alert  
.
• Power On — Plays a melody when the phone is being turned on.  
• Power Off — Plays a melody when the phone is being turned off.  
2. Select the desired Alert option setting (On or Off).  
2. Select On or Off. You are returned to the Sound Settings  
menu.  
Call Settings  
3. To save your new alert settings and return to the Sound  
Settings menu, press the OK soft key.  
Call Answer  
Key Tone  
You can select a specific answer mode when you receive an  
incoming call.  
DTMF Tone Length lets you select the length of the DTMF tones  
that the device sends when dialing.  
1. From the Settings menu, select Call Settings  
Answer  
The following call answer settings appear in the display:  
Call  
.
1. From the Settings menu, select Sounds Settings  
Key  
Tone. The following options appear in the display:  
113  
             
• Any Key — Press any key except the  
or Left soft key to  
• Off — Disables automatic answering of calls  
answer an incoming call.  
• After 1 Second — Phone automatically answers calls after 1  
second  
• Send Key — Press  
to answer an incoming call.  
• After 3 Seconds — Phone automatically answers calls after 3  
seconds  
Tip: You can set your phone to answer calls automatically, without any input  
• After 5 Seconds — Phone automatically answers calls after 5  
seconds  
2. Select the desired call answering method and press the OK  
2. Select the desired call automatic answering setting and  
soft key to save your selection.  
press the OK soft key to save your selection.  
Call Alert  
Speed Dial  
1. From the Settings menu, select Call Settings  
Call Alert.  
The following Call Alert settings appear in the display:  
Speed Dial lets you disable the speed dialing function. (For more  
• Ring Only — Phone rings for an incoming call.  
• Caller ID + Ring — Phone rings and the display shows caller ID for  
an incoming call.  
1. From the Settings menu, select Call Settings  
• On — Enables the speed dial keys.  
Speed Dial.  
• Name Repeat — Phone repeats displaying Contact name or caller  
• Off — Disables the speed dial keys.  
ID.  
2. Select the desired setting and press the OK soft key to save  
2. Select the desired call alerting method and press the OK  
your selection.  
soft key to save your selection.  
Auto Retry  
Auto Answer  
Auto Retry automatically re-dials a number if the connection fails.  
Depending upon your location, the number of times your phone  
automatically dials the number may vary.  
With Auto Answer enabled, your phone automatically answers  
calls after a period of time that you select.  
1. From the Settings menu, select Call Settings  
Auto  
1. From the Settings menu, select Call Settings  
Auto Retry  
.
Answer. The following settings appear in the display:  
The following settings appear in the display:  
Changing Your Settings  
114  
       
• Off — Disables automatic re-dialing of numbers  
3. If you press the Yes soft key, the following options appear  
in the display:  
• Every 10 Seconds — Phone automatically re-dials a number  
every 10 seconds  
• TTY Full — Enables TTY mode and disables microphone and  
earpiece.  
• Every 30 Seconds — Phone automatically re-dials a number  
every 30 seconds  
• TTY+Talk (VCO) — Enables TTY mode and microphone.  
• TTY+Hear (HCO) — Enables TTY mode and earpiece.  
• TTY Off — Disables TTY mode.  
• Every 60 Seconds — Phone automatically re-dials a number  
every 60 seconds  
2. Select the desired setting and press the OK soft key to save  
4. Select the desired TTY Mode setting and press the OK soft  
your selection.  
key to save your selection.  
TTY Mode  
Voice Privacy  
Your phone is fully compatible with TTY equipment used by those  
who are hearing impaired. TTY equipment is connected to your  
phone through the headset connector on the top of the phone.  
TTY Mode must be enabled before you can use your phone with a  
TTY device.  
Voice Privacy when enabled (that is, set to Enhanced), turns on  
advanced voice encryption.  
1. From the Settings menu, select Call Settings  
Voice  
Privacy. The following options appear in the display:  
• Standard — Voice privacy is disabled  
1. From the Settings menu, select Call Settings  
TTY Mode.  
• Enhanced — Voice privacy is enabled  
You are prompted to confirm you want to change the  
current TTY Mode setting.  
2. Select the desired Voice Privacy setting and press the OK  
soft key to save your selection.  
Note: The “Enabling TTY may Impair Headset Use and Non-TTY Accessory  
Hearing Aid Mode  
Performance.” message pops up when you select TTY Mode  
.
Hearing Aid Mode enable or disable your phone’s Hearing Aid  
Compatibility (HAC) support.  
2. To access the TTY Mode settings, press the Yes soft key. To  
return to the Call Settings sub-menu, press the No soft key.  
1. From the Settings menu, select Call Settings  
Hearing Aid  
115  
 
Mode. The following options appear in the display:  
1. From the Settings menu, select Phone Settings  
Language. The following settings appear in the display:  
• English  
• Español  
• On  
• Off  
2. Select the desired hearing aid mode setting and press the  
OK soft key to save your selection.  
2. Select the desired Language setting and press the OK soft  
key to save your selection.  
Phone Settings  
Airplane Mode  
Vibration Feedback  
When set to On, Vibration Feedback causes your phone to vibrate  
as well as play a tone when you press a key, button, or field on  
the phone to assure you that your screen press is recognized.  
When set to On, Airplane Mode disables all radio functions of your  
phone. This prevents you from receiving or making calls (except  
emergency calls), but allows you to use other features (such as  
the camera and the Tools) safely in sensitive environments, such  
as on board an aircraft.  
1. From the Settings menu, select Phone Settings  
Vibration  
Feedback.The following options appear in the display:  
• Activation  
1. From the Settings menu, select Phone Settings  
Airplane  
Mode.The following settings appear in the display:  
• On — Disables the radio transmitter and receiver in your phone  
On — Enables vibration feedback.  
Off — Disables vibration feedback.  
• Vibration intensity — Push and slide left and right (  
1
5).  
• Off — Enables the radio transmitter and receiver in your phone  
2. Select the desired Vibration Feedback settings and press  
2. Select the desired Airplane Mode setting and press the OK  
soft key to save your selection. “Will disable all Incoming  
and Outgoing Calls?” displays in a pop-up message. Select  
Yes to enable airplane mode, or No to return to menu.  
the Save soft key to save your selection.  
Auto Screen Lock  
When set to On, Auto Screen Lock feature allows you to lock your  
screen to prevent unintentional dialing.  
Language  
The language option on your phone can change the language of  
voice prompts, menus, and key-input.  
1. From the Settings menu, select Phone Settings  
Auto  
Changing Your Settings  
116  
         
Lock Phone  
Screen Lock.The following options appear in the display:  
• On — The touch screen is locked when the time set for the  
Locking the phone limits all outgoing calls except calls to 911  
emergency and the three user-programmable emergency  
numbers. You can lock the phone manually during use, or set the  
phone to lock automatically when it is turned on. With the phone  
in lock mode, you can answer incoming calls, but you must  
unlock the phone to place outgoing calls (except to emergency  
and secret numbers).  
backlight has passed.  
Off  
The touch screen remains active whether or not the  
backlight is on.  
2. Select the desired setting and press the OK soft key to save  
your selection.  
3. If the On option is selected, pressing and holding the LOCK  
key (  
If the Off option is selected, the touch screen is always  
activated unless you press the LOCK key (  
) activates the touch screen.  
1. From The Security sub-menu, select Lock Phone. The  
following phone Lock mode settings appear in the display:  
• Lock — Locks the phone immediately (The phone stays locked  
until you enter the lock code.)  
).  
Security  
• Unlock — Unlocks the phone.  
Use the Security menu to lock your phone, set up emergency  
numbers, set restrictions, as well as other security options.  
• On Power Up — The phone locks automatically the next time your  
phone is powered ON (The phone stays locked until you enter the  
lock code.)  
1. From the Settings menu, select Phone Settings  
Security.  
2. Select the desired phone Lock mode setting and press the  
You’re prompted to enter the lock code.  
OK soft key to save your selection.  
Note: The default lock code is the last four digits of your telephone number.  
Tip: You can manually lock your phone by pressing  
2. Select the lock code field, enter the lock code, and press  
the OK soft key. The Security sub-menu appears in the  
display.  
117  
     
Change Lock Code  
Important!: Because of various transmission methods, network parameters,  
and user settings necessary to complete a call from your  
wireless phone, a connection cannot always be guaranteed.  
Therefore, emergency calling may not be available on all  
wireless networks at all times.  
The default lock code for your phone is generally the last four  
digits of your phone number. It is advisable to change the default  
lock code to a secret code for security purposes.  
1. From The Security sub-menu, select Change Lock Code  
.
You’re prompted to enter the new lock code.  
Important!: DO NOT depend on this phone as a primary method of calling  
911 or for any other essential or emergency communications.  
2. Enter the new lock code and press the OK soft key. You’re  
prompted to re-enter the new lock code for verification.  
Remember to always turn your phone on and check for adequate  
signal strength before placing a call.  
3. Enter the new lock code again and press the OK soft key.  
Your new Lock Code is stored.  
Store Emergency Numbers  
Note: Your phone does not allow you to view the Lock Code for obvious  
security reasons. If you change the Lock Code, be sure to write down  
or memorize the new code.  
1. From The Security sub-menu, select Emergency #  
.
2. Select from the three emergency number entries.  
3. Enter an emergency number (up to 32 digits in length),  
Emergency #  
then press the Done soft key.  
Your phone provides the option of storing three emergency  
numbers. Each number can be up to 32 digits in length. All  
emergency numbers can be manually called at any time, even  
when your phone is locked or restricted. This can be a useful  
feature for controlling outgoing calls from your phone.  
Call Emergency Numbers in Lock Mode  
1. In Standby mode, enter the emergency number.  
2. Press  
to place the call.  
Emergency Ringback  
Emergency Ringback lets you enable or disable the alert tone  
your phone plays during an Emergency call.  
Note: Emergency number 911 is hard-coded into your phone. You can dial  
this number any time, even when the phone is locked or restricted. If  
you call 911 an audible tone is heard and an Emergency prompt  
appears in the display for the duration of the call.  
Changing Your Settings  
118  
       
Tip: This feature can be valuable during emergency situations, such as, a  
home invasion. Disabling the Emergency call alert tone can prevent a  
home invader from locating you by means of that tone.  
Note: This procedure does not delete your Photo Gallery. The Photo Gallery  
needs to be deleted separately.  
2. To erase all entries, press Yes. To keep the current entries  
1. From The Security sub-menu, select Emergency  
and return to the Security sub-menu, press No  
.
Ringback. The following options appear in the display:  
Restrictions  
On — Your phone plays an audible alert tone during Emergency  
calls.  
Restrictions lets you restrict the use of your phone for outgoing  
calls, incoming calls, and calls placed from your Contacts.  
Off — Your phone does not play an audible alert tone during  
Emergency calls, but does vibrate.  
1. From The Security sub-menu, select Restrictions. The  
following options appear in the display:  
2. Select the desired Emergency Ringback setting.  
• Calls — Lets you restrict the following call types:  
Master Reset  
Incoming — Lets you Allow All incoming calls, Allow incoming calls  
only from Contacts, or Allow None (No incoming calls).  
Reset Phone returns all Settings to their factory default values.  
1. From The Security sub-menu, select Master Reset. You are  
prompted to confirm that you want to restore default  
settings (except for the Contacts and Voice Dial).  
Outgoing — Lets you Allow All outgoing calls, Allow outgoing calls only  
to Contacts, or Allow None (No outgoing calls).  
• SMS Messages — Lets you restrict the following Text message  
types:  
2. To return to the Security sub-menu without resetting the  
phone, press No. To restore default settings, press Yes  
.
Incoming — Lets you Allow All incoming Text messages or Allow  
None (No incoming Text messages).  
Erase All Contacts  
Outgoing — Lets you Allow All outgoing Text messages or Allow None  
Erase memory erases your Contacts and Group information  
(except Default). This feature is useful if you want to give your  
phone to someone else.  
(No outgoing Text messages).  
• MMS Messages — Lets you restrict the following Picture and  
Video message types:  
1. From The Security sub-menu, select Erase All Contacts. You  
are prompted to confirm erasure of all Contacts entries.  
119  
     
Incoming — Lets you Allow All incoming Picture and Video messages  
or Allow None (No incoming Picture and Video messages).  
The following roaming options appear in the display:  
• Home only — Your phone is available for normal operation only  
within your designated coverage area.  
Outgoing — Lets you Allow All outgoing Picture and Video messages  
or Allow None (No outgoing Picture and Video messages).  
• Automatic — Your Wireless Provider’s Preferred Roaming List  
(PRL) of networks is used to acquire service. If no preferred  
networks are found, any digital system is acquired.  
• IP Connection — Lets you Allow All data connections or Allow  
None (No data connections).  
2. Select the desired Restriction setting(s).  
2. Select the preferred roaming option, then press the OK soft  
NAM Selection  
key.  
Set Time  
The Network menu allows you to select NAM (Number  
Assignment Module) settings for your phone. You can store two  
NAM settings, which are essentially telephone numbers, for your  
phone.  
Use the Set Time option to set the current date and time.  
Note: In digital service mode, the Set Time feature is disabled. The network  
adjusts time and date automatically.  
1. From the Settings menu, select Phone Settings  
NAM  
Selection. The following options appear in the display:  
• NAM1 — Your service contract has one phone line.  
• NAM2 — Your service contract has two phone lines.  
With Airplane Mode set to On, this function is enabled. In digital service  
mode, setting Airplane Mode to Off also disables Set Time. (For more  
1. From the Settings menu, select Phone Settings  
The following options appear in the display:  
• Set Date  
Set Time  
.
2. Select the desired NAM setting. The phone powers itself  
off and back on.  
System Select  
• Set Time  
The System Select menu allows you to select the roaming setting  
for your phone.  
2. Select the desired option.  
For Set Date, the Set Date screen appears in the display.  
1. From the Settings menu, select Phone Settings  
Select  
System  
Use the up and down arrow buttons to select the current date.  
.
Changing Your Settings  
120  
     
Press the OK soft key to save your date setting.  
Important!: For this calibration process to complete successfully, it is  
recommended that you use the stylus to accurately set the new  
calibration touch points.  
For Set Time, the Set Time screen appears in the display.  
Use the up and down arrow buttons to select the current time.  
Press the OK soft key to save your time setting.  
1. From the Settings menu, select Phone Settings  
Touch Sensitivity  
Calibration. The Calibration screen appears in the display.  
Touch Sensitivity lets you adjust how much pressure you must  
apply to the screen for the device to react.  
2. To begin calibration of the screen, press the OK soft key. A  
series of five crosses appear in the screen.  
1. From the Settings menu, select Phone Settings  
Touch  
3. To calibrate the screen, press the center of each cross in  
Sensitivity. The Touch Sensitivity screen appears in the  
turn.  
display.  
PC Connection  
2. Press, hold, and slide the Touch Here button left or right to  
Lets you select the default type of PC connection you wish to use  
to exchange files between a PC and your r850.  
adjust the screen’s responsiveness to your touch (  
1
5).  
3. Test your setting by applying pressure to the Touch Here  
button until it responds.  
Tip: For more information on using PC Connection, contact your service  
provider.  
4. If desired, repeat steps 3 and 4 until the Touch Sensitivity  
setting is acceptable.  
1. At the Phone Settings sub-menu, select PC Connection.  
5. To save your new setting, press the Save soft key.  
The following options appear in the display:  
Calibration  
• USB Mass Storage — Automatically activates when you connect  
your phone to a PC with an optional USB Data Cable. Lets you  
access your phone’s memory and any optional microSD Memory  
Card, if installed, from your PC. (For more information, refer to  
Calibration lets you adjust the screen’s ability to correctly locate  
your touch. This should be done only if the device does not  
appear to be responding properly to on-screen touches.  
121  
• No Connection — This option blocks your r520 from connecting  
with a PC.  
• Save Options — Lets you specify whether your images and videos  
will be stored in your phone or on an optional Memory Card.  
2. Select the preferred PC Connection type.  
• Phone Memory — Lets you review your phone’s available memory  
and manage your files stored there.  
Gesture  
• Card Memory — Lets you review a removable Memory Card’s  
available memory, manage your files stored there, and format new  
Memory Cards.  
The Gesture settings let you enable or disable specific reactions  
to your movements of the phone.  
1. From the Settings menu, select Phone Settings  
Gesture.  
Phone Memory Usage  
The following options appear in the display:  
Phone Memory Usage lets you review your usage of your phone’s  
memory.  
• Mute Event — When set to On (the default value), you can mute  
an incoming event by turning the phone face down.  
1. From the Settings menu, select Memory Manager  
Phone  
• Widget Reset — When set to On (the default value), you can  
return all Widgets placed on the Standby screen pages to the  
Widge Bar by opening it and shaking the phone.  
Memory Usage. The Phone Memory Usage screen appears  
in the display showing the following information:  
Total Used memory usage  
2. Select the desired Gesture setting(s).  
• Available unused memory  
• Images memory usage  
• Videos memory usage  
Memory Manager  
Memory Manager lets you quickly and easily review and manage  
your phone memory usage. To access Memory Manager, do the  
following:  
• Ringtones memory usage  
• Sounds memory usage  
• Applications memory usage  
• Pic/Video Msg memory usage  
From the Settings menu, select Memory Manager. The  
following options appear in the display:  
• Phone Memory Usage — Lets you review your phone’s used and  
available memory.  
2. Press the OK soft key to return to the Memory Manager  
• Card Memory Usage — Lets you review a removable Memory  
Card’s used and available memory.  
menu.  
Changing Your Settings  
122  
 
Card Memory Usage  
• Music  
2. Select the desired file type. The following storage options  
appear in the display:  
Card Memory Usage lets you review your usage of your Memory  
Card.  
• Phone — Saves the selected type of files in your phone’s memory.  
1. From the Settings menu, select Memory Manager  
Card  
• Card — Saves the selected type of files in a removable microSD  
memory card.  
Memory Usage. The Card Memory Usage screen appears in  
the display showing the following information:  
Total Used memory usage  
3. Select the desired storage location.  
4. Press Save to save your selection and return to the Memory  
• Available unused memory  
• Images memory usage  
• Videos memory usage  
• Music memory usage  
• Other memory usage  
Manager menu.  
Phone Memory  
Phone Memory sub-menus let you list files in your multimedia  
folders and let you erase or move files as needed to free up  
memory on your phone for reuse.  
2. Press the OK soft key to return to the Memory Manager  
1. From the Settings menu, select Memory Manager  
Phone  
menu.  
Memory. The Phone screen appears in the display listing  
files in the Images folder.  
Save Options  
Lets you specify where you want your images and videos stored.  
To access Save Options, do the following:  
2. Press the down arrow button. The following options drop  
down:  
1. From the Settings menu, select Memory Manager  
Save  
• Images  
Options. The following file type options appear in the  
display:  
• Videos  
• Ringtones  
• Sounds  
• Images  
• Videos  
123  
   
3. Select the desired option. A list of all files in the related  
Card Memory  
folder appears in the display.  
Card Memory sub-menus let you list files in your multimedia  
folders and let you erase or move files as needed to free up  
space on your Memory Card for reuse.  
Files are listed by name, and each file entry shows the  
name of each file.  
1. From the Settings menu, select Memory Manager  
Card  
4. To erase files, do the following:  
Memory. The Card screen appears in the display listing files  
in the Images folder.  
Press the Erase soft key. The Select to erase screen appears in  
the display.  
2. Press the down arrow button.  
Select the check box for a file you want to erase to mark the file for  
erasure. (Press the Select All check box to mark all files for  
erasure.)  
The following options drop down:  
• Images  
• Videos  
• Music  
• Other  
Press the Erase soft key. You are prompted to confirm erasure of  
the selected file(s).  
5. To move files to the Memory Card, do the following:  
Press the Move soft key. The Select to move screen appears in the  
display.  
3. Select the desired option. A list of all files in the related  
folder appears in the display.  
Select the check box for a file you want to move to mark the file for  
removal to the Memory Card. (Press the Select All check box to  
mark all files for removal.)  
Files are listed by name, and each file entry shows the  
name of each file.  
Press the Move soft key. You are prompted to confirm removal of  
the selected file(s).  
4. To erase files, do the following:  
Press the Erase soft key. The Select to erase screen appears in  
the display.  
6. Press  
to return to the Memory Manager menu.  
Changing Your Settings  
124  
 
Select the check box for a file you want to erase to mark the file for  
erasure. (Press the Select All check box to mark all files for  
erasure.)  
3. To format the Memory Card, press Yes. To return to the  
Card screen without formatting the Memory Card,  
press No  
.
Press the Erase soft key. You are prompted to confirm erasure of  
the selected file(s).  
5. To move files to Phone Memory, do the following:  
Press the Move soft key. The Select to move screen appears in the  
display.  
Select the check box for a file you want to move to mark the file for  
removal to Phone Memory. (Press the Select All check box to mark  
all files for removal.)  
Press the Move soft key. You are prompted to confirm removal of  
the selected file(s).  
6. Press  
to return to the Memory Manager menu.  
Formatting a Memory Card  
Formatting a microSD Memory Card erases any data currently on  
the card and creates multimedia directories compatible with your  
phone. To format a Memory Card, do the following:  
1. From the Settings menu, select Memory Manager  
Card  
Memory. The Card screen appears in the display.  
2. Press the Format soft key. You are prompted to confirm  
formatting of the Memory Card.  
125  
 
Section 15: Toneroom  
Toneroom is a pre-loaded application that lets you access your  
Wireless Carrier’s on-line source for real music ringtones.  
Managing Your Tones  
In the Tone Room home page,  
selet the My Tones tab. The  
My Tones page appears in the  
display.  
Accessing Toneroom  
In Standby mode, press the  
Menu soft key, then select  
Toneroom. The Tone Room  
home page appears in the  
display.  
For more information about Tone  
Room, contact your Wireless  
Provider.  
Follow the links on the Tone  
Room home page to find,  
purchase (if needed), and  
download ringtone files.  
Toneroom  
126  
     
Section 16: Phone Info  
This section explains Phone Info options that let you identify the  
hardware and software versions of your phone and let you  
identify the phone number assigned to your phone.  
Version  
You can view both the software and hardware version of your  
phone using this feature. This feature is helpful if you need to  
contact Customer Service.  
Phone Number  
This option causes the Phone Number screen to appear in the  
display and show the ten-digit number assigned to your phone by  
your Wireless Provider.  
1. In Standby mode, press the Menu soft key, then select  
Phone Info  
Version.  
Your phone’s hardware and software version information  
appears in the display.  
1. In Standby mode, press the Menu soft key, then select  
Phone Info  
Phone Number. The phone number assigned  
2. To return to the Phone Info menu, press  
.
by your Wireless Provider appears in the display.  
ESN / MEID  
2. To return to the Phone Info menu, press  
.
You can view both the Electronic Serial Number (ESN) and the  
Mobile Equipment Identifier (MEID) of your phone using this  
feature. This feature is helpful if you need to contact Customer  
Service.  
Icon Glossary  
This option causes the Icon Glossary list to appear in the display  
and show the icons that can appear in the display and the names  
of the icons.  
1. In Standby mode, press the Menu soft key, then select  
1. In Standby mode, press the Menu soft key, then select  
Phone Info  
Your phone’s ESN/MEID information appears in the display.  
2. To return to the Phone Info menu, press  
ESN /MEID.  
Phone Info  
Icon Glossary. A list shows of the icons that  
can appear on the top line of the display.  
.
2. To return to the Phone Info menu, press  
.
127  
               
Section 17: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. These safety precautions should be followed to  
safely use your phone.  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
radio frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations, the National  
Counsel on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
For body worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
Health and Safety Information  
128  
       
contains no metal and that positions the handset a minimum of  
1.5 cm from the body.  
phone. Additional product specific SAR information can also be  
Warning Regarding Display  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The display on your handset is made of glass or acrylic and could  
break if your handset is dropped or if it receives significant  
impact. Do not use if screen is broken or cracked as this could  
cause injury to you.  
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile phones and genuine  
Samsung accessories.  
CDMA:  
Head: 0.667 W/Kg.  
Body-worn: 0.637 W/Kg.  
PCS:  
information.  
Head: 1.03 W/Kg.  
Body-worn: 0.591 W/Kg.  
UL Certified Travel Adapter  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
The Travel Adapter for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD  
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY  
DAMAGE.  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
129  
       
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,  
CAREFULLY FOLLOW THESE INSTRUCTIONS.  
exposure decreases rapidly with increasing distance from the  
source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at  
far lower power levels, and thus produce RF exposures well  
within the FCC's compliance limits.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE  
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER  
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS  
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health  
problems are associated with using wireless phones. There is no  
proof, however, that wireless phones are absolutely safe.  
Wireless phones emit low levels of radio frequency energy (RF) in  
the microwave range while being used. They also emit very low  
levels of RF when in the stand-by mode. Whereas high levels of  
RF can produce health effects (by heating tissue), exposure to  
low level RF that does not produce heating effects causes no  
known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies  
have suggested that some biological effects may occur, but such  
findings have not been confirmed by additional research. In some  
cases, other researchers have had difficulty in reproducing those  
studies, or in determining the reasons for inconsistent results.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a  
series of Questions and Answers for consumers relating to radio  
frequency (RF) exposure from wireless phones. The FDA  
publication includes the following information:  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless  
phones with built-in antennas, often called "cell," "mobile," or  
"PCS" phones. These types of wireless phones can expose the  
user to measurable radio frequency energy (RF) because of the  
short distance between the phone and the user's head. These RF  
exposures are limited by Federal Communications Commission  
safety guidelines that were developed with the advice of FDA and  
other federal health and safety agencies.  
What is FDA's role concerning the safety of wireless  
phones?  
When the phone is located at greater distances from the user, the  
exposure to RF is drastically lower because a person's RF  
Under the law, FDA does not review the safety of radiation-  
emitting consumer products such as wireless phones before they  
Health and Safety Information  
130  
 
can be sold, as it does with new drugs or medical devices.  
However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level  
that is hazardous to the user. In such a case, FDA could require  
the manufacturers of wireless phones to notify users of the  
health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency  
working group activities, as well.  
FDA shares regulatory responsibilities for wireless phones with  
the Federal Communications Commission (FCC). All phones that  
are sold in the United States must comply with FCC safety  
guidelines that limit RF exposure. FCC relies on FDA and other  
health agencies for safety questions about wireless phones.  
Although the existing scientific data do not justify FDA regulatory  
actions, FDA has urged the wireless phone industry to take a  
number of steps, including the following:  
FCC also regulates the base stations that the wireless phone  
networks rely upon. While these base stations operate at higher  
power than do the wireless phones themselves, the RF  
exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless  
phones.  
Support needed research into possible biological effects of RF of the  
type emitted by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to  
the user that is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible  
information on possible effects of wireless phone use on human  
health.  
Base stations are thus not the primary subject of the safety  
questions discussed in this document.  
FDA belongs to an interagency working group of the federal  
agencies that have responsibility for different aspects of RF  
safety to ensure coordinated efforts at the federal level. The  
following agencies belong to this working group:  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and  
many studies have suffered from flaws in their research  
methods. Animal experiments investigating the effects of radio  
frequency energy (RF) exposures characteristic of wireless  
phones have yielded conflicting results that often cannot be  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
131  
repeated in other laboratories. A few animal studies, however,  
have suggested that low levels of RF could accelerate the  
development of cancer in laboratory animals. However, many of  
the studies that showed increased tumor development used  
animals that had been genetically engineered or treated with  
cancer-causing chemicals so as to be pre-disposed to develop  
cancer in absence of RF exposure. Other studies exposed the  
animals to RF for up to 22 hours per day. These conditions are  
not similar to the conditions under which people use wireless  
phones, so we don't know with certainty what the results of such  
studies mean for human health.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies  
of people actually using wireless phones would provide some of  
the data that are needed. Lifetime animal exposure studies could  
be completed in a few years. However, very large numbers of  
animals would be needed to provide reliable proof of a cancer  
promoting effect if one exists.  
Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-  
up may be needed to provide answers about some health effects,  
such as cancer.  
Three large epidemiology studies have been published since  
December 2000. Between them, the studies investigated any  
possible association between the use of wireless phones and  
primary brain cancer, glioma, meningioma, or acoustic neuroma,  
tumors of the brain or salivary gland, leukemia, or other cancers.  
None of the studies demonstrated the existence of any harmful  
health effects from wireless phones RF exposures.  
This is because the interval between the time of exposure to a  
cancer-causing agent and the time tumors develop - if they do -  
may be many, many years. The interpretation of epidemiological  
studies is hampered by difficulties in measuring actual RF  
exposure during day-to-day use of wireless phones. Many  
factors affect this measurement, such as the angle at which the  
phone is held, or which model of phone is used.  
However, none of the studies can answer questions about long-  
term exposures, since the average period of phone use in these  
studies was around three years.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and  
with groups of investigators around the world to ensure that high  
priority animal studies are conducted to address important  
Health and Safety Information  
132  
questions about the effects of exposure to radio frequency  
energy (RF).  
concerned about avoiding even potential risks, you can take a  
few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a  
person receives, reducing the amount of time spent using a  
wireless phone will reduce RF exposure.  
FDA has been a leading participant in the World Health  
Organization international Electromagnetic Fields (EMF) Project  
since its inception in 1996. An influential result of this work has  
been the development of a detailed agenda of research needs  
that has driven the establishment of new research programs  
around the world. The Project has also helped develop a series of  
public information documents on EMF issues.  
FDA and Cellular Telecommunications & Internet Association  
(CTIA) have a formal Cooperative Research and Development  
Agreement (CRADA) to do research on wireless phone safety.  
FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations.  
CTIA-funded research is conducted through contracts to  
independent investigators. The initial research will include both  
laboratory studies and studies of wireless phone users. The  
CRADA will also include a broad assessment of additional  
research needs in the context of the latest research  
developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not  
know that there is - it is probably very small. But if you are  
133  
If you must conduct extended conversations by wireless phone every  
day, you could place more distance between your body and the source  
of the RF, since the exposure level drops off dramatically with distance.  
For example, you could use a headset and carry the wireless phone  
away from your body or use a wireless phone connected to a remote  
antenna.  
They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to  
limit wireless phone use by children was strictly precautionary; it  
was not based on scientific evidence that any health hazard  
exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Again, the scientific data do not demonstrate that wireless  
phones are harmful. But if you are concerned about the RF  
exposure from these products, you can use measures like those  
described above to reduce your RF exposure from wireless phone  
use.  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that hands-  
free kits reduce risks. Hands-free kits can be used with wireless  
phones for convenience and comfort. These systems reduce the  
absorption of RF energy in the head because the phone, which is  
the source of the RF emissions, will not be placed against the  
head. On the other hand, if the phone is mounted against the  
waist or other part of the body during use, then that part of the  
body will absorb more RF energy. Wireless phones marketed in  
the U.S. are required to meet safety requirements regardless of  
whether they are used against the head or against the body.  
Either configuration should result in compliance with the safety  
limit.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of  
wireless phones, including children and teenagers. If you want to  
take steps to lower exposure to radio frequency energy (RF), the  
measures described above would apply to children and  
teenagers using wireless phones. Reducing the time of wireless  
phone use and increasing the distance between the user and the  
RF source will reduce RF exposure.  
Some groups sponsored by other national governments have  
advised that children be discouraged from using wireless phones  
at all. For example, the government in the United Kingdom  
distributed leaflets containing such a recommendation in  
December 2000.  
Health and Safety Information  
134  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
defibrillators from wireless telephones. This test method is now  
part of a standard sponsored by the Association for the  
Advancement of Medical instrumentation (AAMI). The final draft,  
a joint effort by FDA, medical device manufacturers, and many  
other groups, was completed in late 2000. This standard will  
allow manufacturers to ensure that cardiac pacemakers and  
defibrillators are safe from wireless phone EMI. FDA has tested  
wireless phones and helped develop a voluntary standard  
sponsored by the Institute of Electrical and Electronic Engineers  
(IEEE). This standard specifies test methods and performance  
requirements for hearing aids and wireless phones so that no  
interference occurs when a person uses a compatible phone and  
a compatible hearing aid at the same time. This standard was  
approved by the IEEE in 2000.  
Since there are no known risks from exposure to RF emissions  
from wireless phones, there is no reason to believe that  
accessories that claim to shield the head from those emissions  
reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
advertised. Unlike "hand-free" kits, these so-called "shields"  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption. In February 2002, the Federal trade  
Commission (FTC) charged two companies that sold devices that  
claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims.  
FDA continues to monitor the use of wireless phones for possible  
interactions with other medical devices. Should harmful  
interference be found to occur, FDA will conduct testing to assess  
the interference and work to resolve the problem.  
According to FTC, these defendants lacked a reasonable basis to  
substantiate their claim.  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(Updated 12/1/2006):  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact  
with some electronic devices. For this reason, FDA helped  
develop a detailed test method to measure electromagnetic  
interference (EMI) of implanted cardiac pacemakers and  
FCC RF Safety Program:  
135  
Environmental Protection Agency (EPA):  
1. Get to know your wireless phone and its features, such as  
speed dial and redial. If available, these features help you  
to place your call without taking your attention off the road.  
Occupational Safety and Health Administration's (OSHA):  
2. When available, use a hands-free device. If possible, add  
an additional layer of convenience and safety to your  
wireless phone with one of the many hands free  
accessories available today.  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
3. Position your wireless phone within easy reach. Be able to  
access your wireless phone without removing your eyes  
from the road. If you get an incoming call at an  
Health Protection Agency:  
inconvenient time, let your voice mail answer it for you.  
US Food and Drug Administration:  
4. Let the person you are speaking with know you are driving;  
if necessary, suspend the call in heavy traffic or hazardous  
weather conditions. Rain, sleet, snow, ice and even heavy  
traffic can be hazardous.  
Road Safety  
Your wireless phone gives you the powerful ability to  
communicate by voice, almost anywhere, anytime. But an  
important responsibility accompanies the benefits of wireless  
phones, one that every user must uphold.  
5. Do not take notes or look up phone numbers while driving.  
Jotting down a "to do" list or flipping through your address  
book takes attention away from your primary  
responsibility, driving safely.  
When driving a car, driving is your first responsibility. When using  
your wireless phone behind the wheel of a car, practice good  
common sense and remember the following tips:  
Health and Safety Information  
136  
 
6. Dial sensibly and assess the traffic; if possible, place calls  
when you are not moving or before pulling into traffic. Try  
to plan calls when your car will be stationary. If you need to  
make a call while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
10. Call roadside assistance or a special non-emergency  
wireless assistance number when necessary. If you see a  
broken-down vehicle posing no serious hazard, a broken  
traffic signal, a minor traffic accident where no one  
appears injured, or a vehicle you know to be stolen, call  
roadside assistance or other special non-emergency  
number.  
7. Do not engage in stressful or emotional conversations that  
may be distracting. Make people you are talking with  
aware you are driving and suspend conversations that  
have the potential to divert your attention from the road.  
"The wireless industry reminds you to use your phone safely when  
driving."  
For more information, please call 1-888-901-SAFE, or visit our  
8. Use your wireless phone to call for help. Dial 9-1-1 or other  
local emergency number in the case of fire, traffic accident  
or medical emergencies.  
.
Important!: If you are using a handset other than a standard numeric keypad,  
please call 1-888-901-7233.  
9. Use your wireless phone to help others in emergencies. If  
you see an auto accident, crime in progress or other  
serious emergency where lives are in danger, call 9-1-1 or  
other local emergency number, as you would want others  
to do for you.  
Provided by the Cellular Telecommunications & Internet  
Association.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations.  
137  
 
Prolonged exposure to loud sounds (including music) is the most  
common cause of preventable hearing loss. Some scientific  
research suggests that using portable audio devices, such as  
portable music players and cellular telephones, at high volume  
settings for long durations may lead to permanent noise-induced  
hearing loss. This includes the use of headphones (including  
headsets, earbuds, and Bluetooth or other wireless devices).  
Exposure to very loud sound has also been associated in some  
studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of  
sound produced by a portable audio device varies depending on  
the nature of the sound, the device settings, and the headphones  
that are used. As a result, there is no single volume setting that is  
appropriate for everyone or for every combination of sound,  
settings and equipment.  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
You can obtain additional information on this subject from the  
following sources:  
You should follow some commonsense recommendations when  
using any portable audio device:  
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Health and Safety Information  
138  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Suite 9200  
Patriots Plaza Building  
Voice: (800) 222-2336  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
1-888-232-6348 TTY  
Operating Environment  
Remember to follow any special regulations in force in any area  
and always switch your phone off whenever it is forbidden to use  
it, or when it may cause interference or danger.  
When connecting the phone or any accessory to another device,  
read its user's guide for detailed safety instructions. Do not  
connect incompatible products.  
139  
   
As with other mobile radio transmitting equipment, users are  
advised that for the satisfactory operation of the equipment and  
for the safety of personnel, it is recommended that the  
equipment should only be used in the normal operating position  
(held to your ear with the antenna pointing over your shoulder if  
you are using an external antenna).  
Should turn the phone OFF immediately if there is any reason to  
suspect that interference is taking place;  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless phone with such a device, consult your health care  
provider.  
UsingYourPhoneNearOtherElectronicDevices  
For more information see:  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
phone. Consult the manufacturer to discuss alternatives.  
FCC Hearing-Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless phones under the Hearing Aid Compatibility  
Act of 1988 (HAC Act) to require digital wireless phones be  
compatible with hearing-aids.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless phone and an implantable medical  
device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their  
implantable medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
While some wireless phones are used near some hearing devices  
(hearing aids and cochlear implants), users may detect a  
buzzing, humming, or whining noise. Some hearing devices are  
more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
Health and Safety Information  
140  
     
The wireless telephone industry has developed a rating system  
for wireless phones, to assist hearing device users find phones  
that may be compatible with their hearing devices. Not all phones  
have been rated. Phones that are rated have the rating on their  
box or a label located on the box.  
A sum of 5 is considered acceptable for normal use. A sum of 6  
is considered for best use.  
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated phone successfully. Trying out the phone with your  
hearing device is the best way to evaluate it for your personal  
needs.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
In the above example, if a hearing aid meets the M2 level rating  
and the wireless phone meets the M3 level rating, the sum of the  
two values equal M5. This is synonymous for T ratings. This  
should provide the hearing aid user with "normal usage" while  
using their hearing aid with the particular wireless phone.  
"Normal usage" in this context is defined as a signal quality that  
is acceptable for normal operation.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and  
are likely to generate less interference to hearing devices than  
phones that are not labeled. M4 is the better/higher of the two  
ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are  
likely to generate less interference to hearing devices than  
phones that are not labeled. T4 is the better/higher of the two  
ratings.  
The M mark is intended to be synonymous with the U mark. The  
T mark is intended to be synonymous with the UT mark. The M  
and T marks are recommended by the Alliance for  
Telecommunications Industries Solutions (ATIS). The U and UT  
marks are referenced in Section 20.19 of the FCC Rules.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless phone rating values are then added together.  
141  
   
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
in such areas could cause an explosion or fire resulting in bodily  
injury or even death.  
Other Medical Devices  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your phone off in  
health care facilities when any regulations posted in these areas  
instruct you to do so. Hospitals or health care facilities may be  
using equipment that could be sensitive to external RF energy.  
Users are advised to switch the phone off while at a refueling  
point (service station). Users are reminded of the need to observe  
restrictions on the use of radio equipment in fuel depots (fuel  
storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Vehicles  
Areas with a potentially explosive atmosphere are often but not  
always clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle. You  
should also consult the manufacturer of any equipment that has  
been added to your vehicle.  
Posted Facilities  
Emergency Calls  
Switch your phone off in any facility where posted notices require  
you to do so.  
This phone, like any wireless phone, operates using radio  
signals, wireless and landline networks as well as user-  
programmed functions, which cannot guarantee connection in all  
conditions. Therefore, you should never rely solely on any  
wireless phone for essential communications (medical  
emergencies, for example).  
Health and Safety Information  
142  
   
Remember, to make or receive any calls the phone must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless phone  
networks or when certain network services and/or phone  
features are in use. Check with local service providers.  
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play  
with it because they could hurt themselves and others, damage  
the phone or make calls that increase your phone bill.  
FCC Notice and Cautions  
FCC Notice  
To make an emergency call:  
1. If the phone is not on, switch it on.  
The phone may cause TV or radio interference if used in close  
proximity to receiving equipment. The FCC can require you to  
stop using the phone if such interference cannot be eliminated.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
Vehicles using liquefied petroleum gas (such as propane or  
butane) must comply with the National Fire Protection Standard  
(NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association:  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult this document and your local cellular  
service provider.  
NFPA (National Fire Protection Agency)  
1 Batterymarch Park  
When making an emergency call, remember to give all the  
necessary information as accurately as possible. Remember that  
your phone may be the only means of communication at the  
scene of an accident; do not cut off the call until given  
permission to do so.  
Quincy, Massachusetts  
USA 02169-7471  
143  
 
Cautions  
Switch your phone off before boarding an aircraft. The use of wireless  
phone in aircraft is illegal and may be dangerous to the aircraft's  
operation.  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
phone warranty if said accessories cause damage or a defect to  
the phone.  
Failure to observe these instructions may lead to the suspension or  
denial of telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the  
signal strength in your area. Your phone informs you of the  
current signal strength by displaying a number of bars next to the  
signal strength icon. The more bars displayed, the stronger the  
signal.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone  
in a vehicle. Faulty installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
If you're inside a building, being near a window may give you  
better reception.  
Understanding the Power Save Feature  
Check regularly that all wireless phone equipment in your vehicle is  
mounted and operating properly.  
If your phone is unable to find a signal after searching, a Power  
Save feature is automatically activated. If your phone is active, it  
periodically rechecks service availability or you can check it  
yourself by pressing any key.  
Do not store or carry flammable liquids, gases or explosive materials in  
the same compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including both installed  
or portable wireless equipment in the area over the air bag or in the air  
bag deployment area. If wireless equipment is improperly installed and  
the air bag inflates, serious injury could result.  
Anytime the Power Save feature is activated, a message displays  
on the screen. When a signal is found, your phone returns to  
Standby mode.  
Health and Safety Information  
144  
   
Understanding How Your Phone Operates  
Avoid exposing your phone and accessories to rain or liquid spills. If  
your phone does get wet, immediately turn the power off and remove  
the battery. If it is inoperable, call Customer Care for service.  
Your phone is basically a radio transmitter and receiver. When it's  
turned on, it receives and transmits radio frequency (RF) signals.  
When you use your phone, the system handling your call controls  
the power level. This power can range from 0.006 watts to 0.2  
watts in digital mode.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may  
require additional subscription and/or usage charges. Not all  
features are available for purchase or use in all areas.  
Downloadable Ring Tones may be available at an additional cost.  
Other conditions and restrictions may apply. See your service  
provider for additional information.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should  
service your phone and accessories. Faulty service may void the  
warranty.  
Battery Standby and Talk Time  
There are several simple guidelines to operating your phone  
properly and maintaining safe, satisfactory service.  
Standby and talk times will vary depending on phone usage  
patterns and conditions. Battery power consumption depends on  
factors such as network configuration, signal strength, operating  
temperature, features selected, frequency of calls, and voice,  
data, and other application usage patterns.  
To ensure that the Hearing Aid Compatibility rating for your phone is  
maintained, secondary transmitters such as Bluetooth and WLAN  
components must be disabled during a call. For more information,  
Battery Precautions  
If your phone is equipped with an external antenna, hold the phone  
with the antenna raised, fully-extended and over your shoulder.  
Avoid dropping the cell phone. Dropping it, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you  
suspect damage to the phone or battery, take it to a service center for  
inspection.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the  
internal antenna could inhibit call performance.  
Never use any charger or battery that is damaged in any way.  
Do not modify or remanufacture the battery as this could result in  
serious safety hazards.  
Speak directly into the phone's receiver.  
145  
     
If you use the phone near the network's base station, it uses less  
power; talk and standby time are greatly affected by the signal  
strength on the cellular network and the parameters set by the  
network operator.  
Misuse or use of incompatible phones, batteries, and charging devices  
could result in damage to the equipment and a possible risk of fire,  
explosion, leakage, or other serious hazard.  
Extreme temperatures will affect the charging capacity of your battery:  
it may require cooling or warming first.  
Follow battery usage, storage and charging guidelines found in the  
user’s guide.  
Do not leave the battery in hot or cold places, such as in a car in  
summer or winter conditions, as you will reduce the capacity and  
lifetime of the battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery may temporarily not  
work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below  
Battery charging time depends on the remaining battery charge and  
the type of battery and charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually wear out. When the  
operation time (talk time and standby time) is noticeably shorter than  
normal, it is time to buy a new battery.  
0 °C (32 °F).  
If left unused, a fully charged battery will discharge itself over time.  
Do not place the phone in areas that may get very hot, such as on or  
near a cooking surface, cooking appliance, iron, or radiator.  
Use only Samsung-approved batteries and recharge your battery only  
with Samsung-approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave the battery  
connected to a charger for more than a week, since overcharging may  
shorten its life.  
Do not get your phone or battery wet. Even though they will dry and  
appear to operate normally, the circuitry could slowly corrode and  
pose a safety hazard.  
Do not use incompatible cell phone batteries and chargers. Some Web  
sites and second-hand dealers, not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Do not short-circuit the battery. Accidental short-circuiting can occur  
when a metallic object (coin, clip or pen) causes a direct connection  
between the + and - terminals of the battery (metal strips on the  
battery), for example when you carry a spare battery in a pocket or  
bag. Short-circuiting the terminals may damage the battery or the  
object causing the short-circuiting.  
Do not permit a battery out of the phone to come in contact with metal  
objects, such as coins, keys or jewelry.  
Health and Safety Information  
146  
Do not crush, puncture or put a high degree of pressure on the battery  
as this can cause an internal short-circuit, resulting in overheating.  
Do not store the phone in cold areas. When the phone warms up to its  
normal operating temperature, moisture can form inside the phone,  
which may damage the phone's electronic circuit boards.  
Dispose of used batteries in accordance with local regulations. In some  
areas, the disposal of batteries in household or business trash may be  
prohibited. For safe disposal options for Li-Ion batteries, contact your  
nearest Samsung authorized service center. Always recycle. Do not  
dispose of batteries in a fire.  
Do not drop, knock or shake the phone. Rough handling can break  
internal circuit boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to  
clean the phone. Wipe it with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
Care and Maintenance  
Do not paint the phone. Paint can clog the device's moving parts and  
prevent proper operation.  
Your phone is a product of superior design and craftsmanship  
and should be treated with care. The suggestions below will help  
you fulfill any warranty obligations and allow you to enjoy this  
product for many years.  
Do not put the phone in or on heating devices, such as a microwave  
oven, a stove or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the  
supplied or an approved replacement antenna. Unauthorized antennas  
or modified accessories may damage the phone and violate  
regulations governing radio devices.  
Keep the phone and all its parts and accessories out of the reach of  
small children.  
Keep the phone dry. Precipitation, humidity and liquids contain  
minerals that will corrode electronic circuits.  
If the phone, battery, charger or any accessory is not working properly,  
take it to your nearest qualified service facility. The personnel there  
will assist you, and if necessary, arrange for service.  
Do not use the phone with a wet hand. Doing so may cause an electric  
shock to you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts  
may be damaged.  
Do not store the phone in hot areas. High temperatures can shorten the  
life of electronic devices, damage batteries, and warp or melt certain  
plastics.  
147  
 
Section 18: Warranty Information  
Standard Limited Warranty  
removed or made illegible; (c) any plastic surfaces or other  
externally exposed parts that are scratched or damaged due to  
normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral  
equipment not furnished or approved by SAMSUNG; (e) defects or  
damage from improper testing, operation, maintenance,  
installation, or adjustment; (f) installation, maintenance, and  
service of Product, or (g) Product used or purchased outside the  
United States or Canada.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the original purchaser ("Purchaser") that SAMSUNG's  
Phones and accessories ("Products") are free from defects in  
material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
This Limited Warranty covers batteries only if battery capacity  
falls below 80% of rated capacity or the battery leaks, and this  
Limited Warranty does not cover any battery if (i) the battery has  
been charged by a battery charger not specified or approved by  
SAMSUNG for charging the battery, (ii) any of the seals on the  
battery are broken or show evidence of tampering, or (iii) the  
battery has been used in equipment other than the SAMSUNG  
phone for which it is specified.  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon  
proper use of Product by Purchaser. This Limited Warranty does  
not cover: (a) defects or damage resulting from accident, misuse,  
abuse, neglect, unusual physical, electrical or electromechanical  
stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number  
What are SAMSUNG's Obligations? During the applicable warranty  
period, SAMSUNG will repair or replace, at SAMSUNG's sole  
option, without charge to Purchaser, any defective component  
part of Product. To obtain service under this Limited Warranty,  
Purchaser must return Product to an authorized phone service  
Warranty Information  
148  
       
facility in an adequate container for shipping, accompanied by  
Purchaser's sales receipt or comparable substitute proof of sale  
showing the date of purchase, the serial number of Product and  
the sellers' name and address. To obtain assistance on where to  
deliver the Product, call Samsung Customer Care at 1-888-987-  
4357. Upon receipt, SAMSUNG will promptly repair or replace the  
defective Product. SAMSUNG may, at SAMSUNG's sole option,  
use rebuilt, reconditioned, or new parts or components when  
repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90)  
days. All other repaired/replaced Product will be warranted for a  
period equal to the remainder of the original Limited Warranty on  
the original Product or for 90 days, whichever is longer. All  
replaced parts, components, boards and equipment shall  
become the property of SAMSUNG.  
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS  
CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY  
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE  
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND  
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED  
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION  
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES  
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR  
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.  
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION  
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE  
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE  
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE  
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE  
If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and  
labor charges for the repair or return of such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED  
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND  
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY  
149  
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,  
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF  
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO  
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING  
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS  
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE  
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY  
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE  
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER  
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH  
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.  
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS  
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR  
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER  
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE  
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT  
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL  
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY  
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED  
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE  
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES  
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS  
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY  
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH  
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE  
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE  
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT  
This Limited Warranty allocates risk of Product failure between  
Purchaser and SAMSUNG, and SAMSUNG's Product pricing  
reflects this allocation of risk and the limitations of liability  
contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make  
modifications to this Limited Warranty, or make additional  
warranties binding on SAMSUNG. Accordingly, additional  
statements such as dealer advertising or presentation, whether  
oral or written, do not constitute warranties by SAMSUNG and  
should not be relied upon.  
Warranty Information  
150  
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
End User License Agreement for Software  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
151  
 
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
shall cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge  
and agree that use of the Software is at your sole risk and that  
the entire risk as to satisfactory quality, performance, accuracy  
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY  
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND  
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND  
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS  
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)  
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH  
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED  
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF  
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS  
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,  
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,  
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG  
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR  
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS  
CONTAINED IN THE SOFTWARE WILL MEET YOUR  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
Warranty Information  
152  
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL  
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE  
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN  
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG  
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.  
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE  
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON  
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE  
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.  
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF  
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO  
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL  
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO  
THIS LIMITATION MAY NOT APPLY TO YOU.  
11. LIMITATION OF LIABILITY. Notwithstanding any damages that  
you might incur for any reason whatsoever (including, without  
limitation, all damages referenced herein and all direct or general  
damages in contract or anything else), the entire liability of  
Samsung under any provision of this EULA and your exclusive  
remedy hereunder shall be limited to the greater of the actual  
damages you incur in reasonable reliance on the Software up to  
the amount actually paid by you for the Software or US$5.00. The  
foregoing limitations, exclusions and disclaimers (including  
Sections 9, 10 and 11) shall apply to the maximum extent  
permitted by applicable law, even if any remedy fails its essential  
purpose.  
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN  
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN  
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,  
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL  
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF  
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY  
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR  
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF  
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,  
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH  
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF  
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION  
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,  
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
153  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
shall not be governed by the UN Convention on Contracts for the  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
default settings. Please contact the Samsung Customer Care  
Center for details.  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
Customer Care Center:  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Precautions for Transfer and Disposal  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Warranty Information  
154  
Phone: 1-888-987-HELP (4357)  
©
2009 Samsung Telecommunications America. All rights  
reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
155  
Index  
Call Functions  
Adjusting the Call Volume 22  
Multi Shot 68  
Options 68  
A
Accessing Your Phone’s Tools 88  
Airplane Mode 116  
Alarm Clock 97  
Set an Alarm 98  
Turn Off the Alarm 99  
When an Alarm Sounds 98  
B
Answering a Call 21  
Call Log 22  
Making a Call — Number Entry  
Dialing 18  
Making a Call — Speed  
Dialing 19  
Photo Gallery 77  
Save Pictures 67  
Screen Icons 66  
Taking Pictures 63  
Zoom 72, 77  
Camera mode 16  
Card Memory  
Making a Call — Voice Dialing 20  
Battery  
Call Settings  
Formatting 125  
Charging 4  
Auto Answer 114  
Auto Retry 114  
Call Alert 114  
Management 124  
Change Text Entry Modes 45  
Contacts List 32  
Converters 102  
Creating and Sending New Messages  
Picture (Pic) Message 50  
Text Message 49  
Video Message 52  
D
Low Battery Indicator 5  
Removal 6  
Travel Adapter 5  
Bluetooth  
Call Answer 113  
Camcorder  
Add New Device 93  
Settings 94  
Color Effects 75  
Options 73  
Screen Icons 67  
Taking Videos 63  
Camcorder mode 16  
Camera  
Turn On/Off 92  
Browser 61  
C
Display Settings  
Backlight 111  
Calculator 101  
Calendar 95  
Brightness 72, 76  
Banner 110  
Wallpaper 110  
Color Effects 70  
156  
   
Image Shuffle  
Wallpaper 110  
In-Use Menu 30  
Inbox 56  
Messages and Lock Mode 56  
Outbox 56  
E
Emergency Calls 18  
Entering Text 43  
Entering Numbers 47  
Entering Symbols 47  
Using T9 Mode 46  
Erase voice memos 87  
F
File Save Options 123  
Formatting a Memory Card 125  
Formatting a microSD Card 125  
G
Voicemail 58  
K
L
Message Send Options 54  
Message Setting 58  
Messaging  
Erasing Messages 58  
Message Settings 58  
microSD  
Key Tone 113  
Language 116  
Lock Mode 14  
M
Making a Call  
Formatting 125  
Installing 8  
Removing 8  
Number Entry Dialing 18  
Speed Dialing 19  
Voice Dialing 20  
Gallery, photo 77  
Getting Started  
Mode  
Melody Shuffle  
Ringer Type 112  
Memo Pad 97  
Memory Card  
Formatting 125  
Camcorder 16  
Camera 16  
Activating Your Phone 6  
Understanding this User  
Manual 4  
M-Ratings 141  
Multimedia 82  
Music Player 79  
N
NAM selection 120  
Notes and tips 4  
Notes, description 4  
Number Entry Dialing 18  
Voicemail 7  
Installing 8  
Removing 8  
H
HAC 140  
Menu Navigation  
In-Use Options 30  
Return to Previous Menu 29  
Message Folders  
Drafts folder 57  
Handwriting Recognition 44  
Health and Safety Information 128  
I
Icon Glossary 127  
157  
Photos  
Sending 78  
Picture (Pic) Message 50  
Picture Messages  
Send in Camera Mode 51  
Q
Quality, pictures 69  
Quality, videos 74  
QWERTY Keypad 43  
R
Receiving New Messages 54  
While in a Call 55  
Record memos 86  
Return to Previous Menu 29  
Ringer Volume Setting 15  
Roaming 27  
Resetting Your Phone 119  
Restriction 119  
Set Time 120  
Settings  
Call Settings 113  
P
Personal Organizer  
Voice Memo 86  
Phone  
Command Keys 11  
Display Screen 12  
Display Screen Icons 13  
Features 9  
Display 110  
Phone 116  
Security 117  
Sound 111  
Modes 13  
View,Closed 9  
Phone Info  
Setup  
Location 107  
Voicemail 55  
Shutter sound 72  
Silent Mode 15  
Icon Glossary 127  
Phone Number 127  
Version 127  
Sound Settings  
Phone Memory  
Alerts 113  
Key Tone 113  
Usage Info 123  
Phone Number 127  
Phone Safety 139  
Phone Settings  
S
Ringer Type 112  
Speed Dialing 19  
One-Touch Dialing 19  
Two-Touch Dialing 19  
Standard Limited Warranty 148  
Standby Mode 14  
Stop Watch 102  
SAR values 128  
Save pictures 67  
Screen Layouts 65  
Security Settings  
Change Lock 118  
Emergency # 118  
Erase Contacts 119  
Lock Phone 117  
Airplane Mode 116  
Language 116  
NAM selection 120  
Set Time 120  
System Select 120  
158  
Voicemail  
Checking 55  
Listening To 7  
Setup 55  
VoiceSignal  
Voice Memos 86  
T
Taking pictures and videos 63  
Text Conventions 4  
Text Entry Mode 45  
Changing 45  
U
UL Certification 129  
Understanding Your Contacts  
Adding a New Contact Entry 32  
Deleting a Contact Entry 41  
Editing an Existing Contact  
Entry 37  
Text message 49  
Text Modes  
W
Changing 45  
Finding a Contact Entry 36  
Memory 42  
Pauses 38  
Wallpaper 110  
Warranty Information 148  
World Time 99  
Tip Calculator 106  
Tip, description 4  
Tools  
Using Abc Mode 47  
Alarm Clock 97  
Bluetooth 92  
Calculator 101  
Calendar 95  
Converter 102  
Memo Pad 97  
V
Version 127  
Video Message 52  
Voice Dialing 20  
Voice Memo 86  
Erase all memos 87  
Record memos 86  
Review memos 87  
Voice Service  
Stop Watch 102  
Tip Calculator 106  
World Time 99  
Tools Menu  
Accessing 88  
T-Ratings 141  
TTY Mode 115  
Command Tips 89  
Commands 88  
Making a Call 20  
Settings 89  
159  

Tripp Lite NB1099BK User Manual
Toshiba TRANSMEMORY U2M 008GT User Manual
Sprint Nextel Cell Phone SCP 8400 User Manual
Sony CD Player CDX GT360MP User Manual
Seagate MOMENTUS ST9160314AS User Manual
Seagate BARRACUDA ST3250310AS User Manual
Samsung GH68 37099A User Manual
Onkyo C 705TX User Manual
Nokia MEDIA MASTER 211S User Manual
Bostitch Bte550z User Manual