Seagate Pipeline HD 100633414 User Manual

Product Manual  
®
Pipeline HD  
ST2000VM003  
ST1000VM002  
100633414  
Rev. F  
May 2012  
Contents  
4.3.3  
Pipeline HD SATA Product Manual, Rev. F  
Pipeline HD SATA Product Manual, Rev. F  
Pipeline HD SATA Product Manual, Rev. F  
Seagate Technology Support Services  
Available services include:  
Presales & Technical support  
Global Support Services telephone numbers & business hours  
Authorized Service Centers  
For information regarding Warranty Support, visit  
http://www.seagate.com/www/en-us/support/warranty_&_returns_assistance  
Pipeline HD SATA Product Manual, Rev. F  
7
 
8
Pipeline HD SATA Product Manual, Rev. F  
1.0 Introduction  
This manual describes the functional, mechanical and interface specifications for the following Seagate  
Pipeline HD® SATA model drives:  
ST2000VM003  
ST1000VM002  
These drives provide the following key features:  
• 5900 RPM spindle speed  
• High instantaneous (burst) data-transfer rates with a default of 6Gb/s for ST1000VM002 and ST2000VM003  
models. Limit settings for 1.5Gb/s and 3.0Gb/s are available via S.M.A.R.T. Command Transport command.  
• Support for S.M.A.R.T. drive monitoring and reporting  
• Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for  
increased areal density  
• State-of-the-art cache and on-the-fly error-correction algorithms  
• Native Command Queueing with command ordering to increase performance in demanding applications  
• Full-track multiple-sector transfer capability without local processor intervention  
• Quiet operation  
• Compliant with RoHS requirements in China and Europe  
• SeaTools diagnostic software performs a drive self-test that eliminates unnecessary drive returns.  
• Supports latching SATA cables and connectors  
• Worldwide Name (WWN) capability uniquely identifies the drive.  
• Supports Trusted Send/Receive Security Protocol  
• Reliability for 24×7 video applications  
• Supports ATA8 streaming commands  
• Supports power-up in the standby feature  
• Supports Trusted Send/Receive Security Protocol  
• Performance-tuned for seamless video applications  
• Built-in error recovery for non-stop video streaming  
• Best-in-class acoustic performance means virtually silent operation  
• Enhanced caching capabilities enable superior video recording quality.  
1.1 About the Serial ATA Interface  
The Serial ATA interface provides several advantages over the traditional (parallel) ATA interface. The primary  
advantages include:  
• Easy installation and configuration with true plug-and-play connectivity. It is not necessary to set any jumpers  
or other configuration options.  
• Thinner and more flexible cabling for improved enclosure airflow and ease of installation.  
• Scalability to higher performance levels.  
Pipeline HD SATA Product Manual, Rev. F  
9
             
Introduction  
In addition, Serial ATA makes the transition from parallel ATA easy by providing legacy software support. Serial  
ATA was designed to allow you to install a Serial ATA host adapter and Serial ATA disk drive in your current system  
and expect all of your existing applications to work as normal.  
The Serial ATA interface connects each disk drive in a point-to-point configuration with the Serial ATA host  
adapter. There is no master/slave relationship with Serial ATA devices like there is with parallel ATA. If two drives  
are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both  
“masters” on two separate ports. This essentially means both drives behave as if they are Device 0 (master)  
devices.  
The host adapter may, optionally, emulate a master/slave environment to host software where two  
devices on separate Serial ATA ports are represented to host software as a Device 0 (master) and Device  
1 (slave) accessed at the same set of host bus addresses. A host adapter that emulates a master/slave  
environment manages two sets of shadow registers. This is not a typical Serial ATA environment.  
Note  
The Serial ATA host adapter and drive share the function of emulating parallel ATA device behavior to provide  
backward compatibility with existing host systems and software. The Command and Control Block registers, PIO  
and DMA data transfers, resets, and interrupts are all emulated.The Serial ATA host adapter contains a set of  
registers that shadow the contents of the traditional device registers, referred to as the Shadow Register Block. All  
Serial ATA devices behave like Device 0 devices. For additional information about how Serial ATA emulates  
parallel ATA, refer to the “Serial ATA International Organization: Serial ATA Revision 3.0”. The specification can be  
10  
Pipeline HD SATA Product Manual, Rev. F  
     
2.0 Drive Specifications  
Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power.  
For convenience, the phrases the drive and this drive are used throughout this manual to indicate the following  
drive models:  
ST2000VM003  
ST1000VM002  
2.1 Specification summary tables  
The specifications listed in the following tables are for quick reference. For details on specification measurement  
or definition, see the appropriate section of this manual.  
Table 1 Drive specifications summary for 2TB and 1TB models  
Drive Specification  
Formatted capacity (4K/sector)*  
Guaranteed sectors  
Heads  
ST2000VM003  
ST1000VM002  
2000GB (2TB)  
1000GB (1TB)  
3,907,029,168  
1,953,525,168  
4
2
2
1
Disks  
4K  
4K  
Bytes per sector  
(512 bytes per sector  
emulated at the interface)  
(512 bytes per sector  
emulated at the interface)  
63  
16  
63  
16  
Default sectors per track  
Default read/write heads  
Default cylinders  
16,383  
16,383  
1807kFCI  
352ktracks/in  
1807kFCI  
352ktracks/in  
Recording density (max)  
Track density (avg)  
2
2
625Gfc/in  
625Gfc/in  
Areal density (avg)  
5900 RPM  
2147Mb/s  
159MB/s  
600MB/s  
5900 RPM  
2147Mb/s  
159MB/s  
600MB/s  
Spindle speed  
Internal data transfer rate (max)  
Sustained data transfer rate OD  
I/O data-transfer rate  
PIO modes: 0 to 4  
ATA data-transfer modes supported  
Multiword DMA modes: 0 to 2  
Ultra DMA modes: 0 to 6  
64MB  
64MB  
Cache buffer  
Height (max)  
26.1mm / 1.028 in  
101.6mm / 4.0 in  
20.20mm/ 0.795 in  
101.6mm / 4.0 in  
Width (max)  
(
0.010 in)  
(
0.010 in)  
147.00mm / 5.78 in  
535g / 1.18 lb  
5.1ms  
147.00mm / 5.78 in  
415g/ 0.915 lb  
5.1ms  
Length (max)  
Weight (typical)  
Average latency  
Power-on to ready (max)  
<17s  
<6s  
Pipeline HD SATA Product Manual, Rev. F  
11  
     
Drive Specifications  
Table 1 Drive specifications summary for 2TB and 1TB models (continued)  
Drive Specification  
ST2000VM003  
ST1000VM002  
<17s  
<6s  
Standby to ready (max)  
<1.0ms read;  
<1.2ms write  
<1.0ms read;  
<1.2ms write  
Track-to-track seek time (typical)  
<8.5ms read;  
<9ms write  
<8.5ms read;  
<9ms write  
Average seek (typical)  
2.0A  
2.0A  
Startup current (typical) 12V (peak)  
5V: 5%  
12V: 10%  
5V: 5%  
12V: 10%  
Voltage tolerance  
(including noise)  
0° to 75°C  
Operating temperature (drive case temperature)  
Nonoperating temperature (ambient)  
–40° to 70°C  
20°C per hour (operating)  
30°C per hour (nonoperating)  
Temperature gradient (max)  
5% to 95% (operating)  
5% to 95% (nonoperating)  
Relative humidity  
30% per hour  
30% per hour  
Relative humidity gradient (max)  
Wet bulb temperature (max)  
37.7°C (operating)  
40.0°C (nonoperating)  
–60.96m to 3048m  
(–200 ft. to 10,000+ ft.)  
–60.96m to 3048m  
(–200 to 10,000+ ft.)  
Altitude, operating  
–60.96m to 12,192m  
(–200 ft. to 40,000+ ft.)  
–60.96m to 12,192m  
(–200 ft. to 40,000+ ft.)  
Altitude, nonoperating  
(below mean sea level, max)  
80 Gs at 2ms  
300 Gs at 2ms  
80 Gs at 2ms  
350 Gs at 2ms  
Operational Shock (max)  
Nonoperational Shock (max)  
2Hz–22Hz: 0.25 Gs,  
Limited displacement  
22Hz–350Hz: 0.50 Gs  
350Hz–500Hz: 0.25 Gs  
2Hz–22Hz: 0.25 Gs,  
Limited displacement  
22Hz–350Hz: 0.50 Gs  
350Hz–500Hz: 0.25 Gs  
Vibration, operating  
5Hz–22Hz: 3.0 Gs  
22Hz–350Hz: 3.0 Gs  
350Hz–500Hz: 3.0 Gs  
5Hz–22Hz: 3.0 Gs  
22Hz–350Hz: 3.0 Gs  
350Hz–500Hz: 3.0 Gs  
Vibration, nonoperating  
Drive acoustics, sound power  
Idle**  
2.1 bels (typical)  
2.3 bels (max)  
1.9 bels (typical)  
2.1 bels (max)  
2.3 bels (typical)  
2.4 bels (max)  
2.2 bels (typical)  
2.3 bels (max)  
Seek  
14  
14  
1 per 10 bits read  
1 per 10 bits read  
Nonrecoverable read errors  
Annualized Failure Rate (AFR)  
0.55%  
0.55%  
To determine the warranty for a specific drive, use a web  
browser to access the following web page:  
From this page, click on the “Verify Your Warranty” link. You will  
be asked to provide the drive serial number, model number (or  
part number) and country of purchase. The system will display  
the warranty information for your drive Preventative  
maintenance: none required.  
Warranty  
300K at 25°C, 50% rel. humidity  
Yes  
Load/Unload cycles  
Supports Hotplug operation per the Serial ATA Revision  
3.0 specification  
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending  
on operating environment and formatting.  
**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power  
to operational levels  
12  
Pipeline HD SATA Product Manual, Rev. F  
Drive Specifications  
2.2 Formatted capacity  
Formatted  
capacity*  
Guaranteed  
sectors  
Model  
Bytes per sector  
4096  
ST2000VM003  
2TB  
3,907,029,168  
1,953,525,168  
(512 bytes per sector emulated  
at the interface)  
4096  
ST1000VM002  
1TB  
(512 bytes per sector emulated  
at the interface)  
* One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending  
on operating environment and formatting.  
2.2.1 LBA mode  
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where  
n is the number of guaranteed sectors as defined above.  
addressing support of drives with capacities over 137GBs.  
2.3 Default logical geometry  
Cylinders  
Read/write heads  
Sectors per track  
16,383  
16  
63  
LBA mode  
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where  
n is the number of guaranteed sectors as defined above.  
2.4 Recording and interface technology  
ST2000VM003  
SATA  
ST1000VM002  
SATA  
Interface  
Recording method  
Perpendicular  
1807kFCI  
Perpendicular  
1807kFCI  
Recording density (max)  
Track density (avg)  
352ktracks/in  
625Gfc/in2  
5900 0.2%  
2147Mb/s  
159MB/s  
352ktracks/in  
625Gfc/in2  
5900 0.2%  
2147Mb/s  
159MB/s  
Areal density (avg)  
Spindle speed (RPM)  
Internal data transfer rate (max)  
Sustained data transfer rate (max)  
I/O data-transfer rate (max)  
600MB/s  
600MB/s  
Pipeline HD SATA Product Manual, Rev. F  
13  
                                                 
Drive Specifications  
2.5 Physical characteristics  
Maximum height  
2TB model  
26.1mm / 1.028 in  
1TB model  
20.20mm / 0.795 in  
Maximum width  
Maximum length  
Typical weight  
2TB model  
101.6mm / 4.0 in ( 0.010 in)  
147.00mm / 5.78 in  
535g / 1.18 lb  
1TB model  
415g / 0.915 lb  
64MB (65,536kb)  
Cache buffer  
2.6 Seek time  
Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using  
drive diagnostics. The specifications in the table below are defined as follows:  
• Track-to-track seek time is an average of all possible single-track seeks in both directions.  
• Average seek time is a true statistical random average of at least 5000 measurements of seeks between  
random tracks, less overhead.  
2TB  
1TB  
Typical seek times (ms)  
Track-to-track  
Read  
<1.0  
<8.5  
5.1  
Write  
<1.2  
<9.0  
5.1  
Read  
<1.0  
<8.5  
5.1  
Write  
<1.2  
<9.0  
5.1  
Average  
Average latency  
These drives are designed to consistently meet the seek times represented in this manual. Physical  
seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted values.  
However, due to the manner in which these drives are formatted, benchmark tests that include  
command overhead or measure logical seeks may produce results that vary from these specifications.  
Note  
2.7 Start/stop times  
Start/stop times @ 25°C  
Power-on to ready (max)  
Standby to ready (max)  
Ready to spindle stop (max)  
2TB model  
<17.0s  
1TB model  
< 6.0s  
<17.0s  
< 6.0s  
10.0s  
10.0s  
14  
Pipeline HD SATA Product Manual, Rev. F  
                                             
Drive Specifications  
2.8 Power specifications  
The drive receives DC power (+5V or +12V) through a native SATA power connector. (Refer to Figure 3 ).  
2.8.1 Power consumption  
Power requirements for the drives are listed in Table 2 on page 15. Typical power measurements are based on an  
average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient  
temperature.  
• Spinup power  
Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating speed.  
• Read/write power and current  
Read/write power is measured with the heads on track, based on a 16-sector write followed by a 32-ms delay,  
then a 16-sector read followed by a 32-ms delay.  
• Operating power and current (CE profile)  
Operating power is measured by simulating a typical PVR operating environment, using a 50% write, 50%  
read algorithm.  
• Idle mode power  
Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in a  
random track location.  
• Standby mode  
During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/  
write electronics are in power-down mode.  
Table 2 DC power requirements for 2TB models  
Power dissipation (2-disk values shown)  
Avg (watts 25°C) Avg 5V typ amps Avg 12V typ amps  
Spinup  
Idle* †  
2.0  
3.7418  
5.05  
0.221  
0.302  
0.15  
0.15  
0.219  
0.295  
0.005  
0.005  
Operating  
Standby  
Sleep  
0.819  
0.819  
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power  
to operational levels.  
†5W IDLE, Standby and Sleep,with DIPLM enabled  
Table 3 DC power requirements for 1TB models  
Power dissipation (1-disk values shown)  
Avg (watts 25°C) Avg 5V typ amps Avg 12V typ amps  
Spinup  
Idle* †  
2.0  
2.502  
3.676  
0.819  
0.819  
0.152  
0.385  
0.15  
0.15  
0.145  
0.145  
0.005  
0.005  
Operating  
Standby  
Sleep  
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power  
to operational levels. Measurement was taken in Idle 1 mode.  
†5W IDLE, Standby and Sleep,with DIPLM enabled  
Pipeline HD SATA Product Manual, Rev. F  
15  
                                     
Drive Specifications  
Figure 1 Typical Current Profiles (5V)  
Figure 2 Typical Current Profiles (12V)  
16  
Pipeline HD SATA Product Manual, Rev. F  
   
Drive Specifications  
2.8.2 Conducted noise  
Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on the  
+12V line or an equivalent 15-ohm resistive load on the +5V line.  
• Using 12V power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave  
injected noise at up to 10MHz.  
• Using 5V power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave  
injected noise at up to 10MHz.  
Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write current.  
2.8.3 Voltage tolerance  
Voltage tolerance (including noise):  
5V: 5%  
12V: 10%  
2.8.4 Power-management modes  
The drive provides programmable power management to provide greater energy efficiency. In most systems, you  
can control power management through the system setup program. The drive features the following power-  
management modes:  
Power modes  
Active  
Heads  
Tracking  
Tracking  
Parked  
Spindle  
Rotating  
Rotating  
Stopped  
Stopped  
Buffer  
Enabled  
Enabled  
Enabled  
Disabled  
Idle  
Standby  
Sleep  
Parked  
• Active mode  
The drive is in Active mode during the read/write and seek operations.  
• Idle mode  
The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disk  
access is necessary.  
• Standby mode  
The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set the  
standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for a spec-  
ifiable length of time. The standby timer delay is established using a Standby or Idle command. In Standby  
mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive accepts all com-  
mands and returns to Active mode any time disk access is necessary.  
• Sleep mode  
The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buffer is  
disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it receives a Hard  
Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and enters Standby mode  
with all current translation parameters intact.  
• Idle and Standby timers  
Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and  
begins counting down from its specified delay times to zero. If the standby timer reaches zero before any drive  
activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the drive  
accepts all commands and returns to Active mode when disk access is necessary.  
Pipeline HD SATA Product Manual, Rev. F  
17  
                                           
Drive Specifications  
2.9 Environmental specifications  
2.9.1 Drive case temperature  
Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Drive  
case temperature should be measured at the location indicated in Figure 4.  
Operating (drive case temperature)  
Nonoperating (ambient)  
0° to 75°C (32° to 167°F)  
–40° to 70°C (–40° to 158°F)  
2.9.2 Temperature gradient  
Operating  
20°C per hour (68°F per hour max), without  
condensation  
Nonoperating  
30°C per hour (86°F per hour max)  
2.9.3 Humidity  
2.9.3.1 Relative humidity  
Operating  
5% to 95% noncondensing  
(30% per hour max)  
Nonoperating  
5% to 95% noncondensing  
(30% per hour max)  
2.9.3.2 Wet bulb temperature  
Operating  
37.7°C (99.9°F max)  
40°C (104°F max)  
Nonoperating  
2.9.4 Altitude  
Operating  
–60.96m to 3048m (–200 ft. to 10,000+ ft.)  
–60.96m to 12,192m (–200 ft. to 40,000+ ft.)  
Nonoperating  
2.9.5 Shock  
All shock specifications assume that the drive is mounted securely with the input shock applied at the drive  
mounting screws. Shock may be applied in the X, Y or Z axis.  
2.9.5.1 Operating shock  
These drives comply with the performance levels specified in this document when subjected to a maximum  
operating shock of 80 Gs based on half-sine shock pulses of 2ms during read operations. Shocks should not be  
repeated more than two times per second.  
2.9.5.2 Nonoperating shock  
The nonoperating shock level that the drive can experience without incurring physical damage or degradation in  
performance when subsequently put into operation is 300 Gs (for 2TB model) and 350 Gs (for 1TB) based on a  
nonrepetitive half-sine shock pulse of 2ms duration.  
18  
Pipeline HD SATA Product Manual, Rev. F  
                                     
Drive Specifications  
2.9.6 Vibration  
All vibration specifications assume that the drive is mounted securely with the input vibration applied at the drive  
mounting screws. Vibration may be applied in the X, Y or Z axis, with linear swept sine inputs.  
2.9.6.1 Operating vibration  
The maximum vibration levels that the drive may experience while meeting the performance standards specified  
in this document are specified below.  
2Hz to 22Hz  
0.25 Gs (Limited displacement)  
22Hz to 350Hz  
350Hz to 500Hz  
0.50 Gs  
0.25 Gs  
2.9.6.2 Nonoperating vibration  
The maximum nonoperating vibration levels that the drive may experience without incurring physical damage or  
degradation in performance when subsequently put into operation are specified below.  
5Hz to 22Hz  
3.0 Gs (limited displacement)  
22Hz to 350Hz  
35Hz to 500Hz  
3.0 Gs  
3.0 Gs  
Pipeline HD SATA Product Manual, Rev. F  
19  
           
Drive Specifications  
2.10 Acoustics  
Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All  
measurements are consistent with ISO document 7779. Sound power measurements are taken under essentially  
free-field conditions over a reflecting plane. For all tests, the drive is oriented with the cover facing upward.  
For seek mode tests, the drive is placed in seek mode only. The number of seeks per second is defined by the  
following equation:  
Note  
(Number of seeks per second = 0.4 / (average latency + average access time)  
Table 4 Fluid Dynamic Bearing (FDB) motor acoustics  
Model  
Idle*  
Seek  
2.1 bels (typ)  
2.3 bels (max)  
2.3 bels (typ)  
2.4 bels (max)  
ST2000VM003  
1.9 bels (typ)  
2.1 bels (max)  
2.2 bels (typ)  
2.3 bels (max)  
ST1000VM002  
*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and power  
to operational levels.  
2.10.1 Test for Prominent Discrete Tones (PDTs)  
Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this  
process is the use of the absolute threshold of hearing. Seagate uses this threshold curve (originated in ISO 389-  
7) to discern tone audibility and to compensate for the inaudible components of sound prior to computation of  
tone ratios according to Annex D of the ECMA-74 standards.  
2.11 Electromagnetic immunity  
When properly installed in a representative host system, the drive operates without errors or degradation in  
performance when subjected to the radio frequency (RF) environments defined in the following table:  
Table 5 Radio frequency environments  
Test  
Description  
Performance Level Reference standard  
Electrostatic  
discharge  
EN61000-4-2: 95  
B
Contact, HCP, VCP: 4 kV; Air: 8 kV  
80MHz to 1,000MHz, 3 V/m,  
EN61000-4-3: 96  
ENV 50204: 95  
Radiated RF  
immunity  
80% AM with 1kHz sine  
A
900MHz, 3 V/m, 50% pulse modulation @ 200Hz  
Electrical fast  
transient  
EN61000-4-4: 95  
1 kV on AC mains, 0.5 kV on external I/O  
1 kV differential, 2 kV common, AC mains  
B
B
A
Surge immunity  
EN61000-4-5: 95  
EN61000-4-6: 97  
Conducted RF 150kHz to 80MHz, 3 Vrms, 80% AM with 1kHz  
immunity  
sine  
0% open, 5 seconds  
0% short, 5 seconds  
40%, 0.10 seconds  
70%, 0.01 seconds  
C
C
C
B
EN61000-4-11: 94  
Voltage dips,  
interrupts  
20  
Pipeline HD SATA Product Manual, Rev. F  
                               
Drive Specifications  
2.12 Reliability - Annualized Failure Rate  
The product will achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of ambient  
the product AFR. AFR is a population statistics that is not relevant to individual units.  
• AFR specifications are based on the following assumptions for consumer electronics environments:  
• 8760 power-on-hours per year  
• 10,000 average motor start/stop cycles per year  
• Operations at nominal voltages  
• Temperatures outside the specifications in Section 2.9 may reduce the product reliability.  
• Normal I/O duty cycle for consumer electronics environments. Operation at excessive I/O duty cycle may  
degrade product reliability.  
The consumer electronics environment of power-on-hours, temperature, and I/O duty cycle affect the product  
AFR. The AFR will be degraded if used in an enterprise application.  
2.13 Warranty  
To determine the warranty for a specific drive, use a web browser to access the following web page:  
From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive serial number,  
model number (or part number) and country of purchase. The system will display the warranty information for your  
drive. Preventative maintenance: none required.  
2.14 Agency certification  
2.14.1 Safety certification  
These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so marked  
as to the certify agency.  
2.14.2 Electromagnetic compatibility  
Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the  
Electromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the  
levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are defined  
by EN55022, Class B and the immunity levels are defined by EN55024.  
Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the  
directives when used in the test systems, we cannot guarantee that all systems will comply with the directives.  
The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if  
necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should  
confirm EMC compliance and provide CE marking for their products.  
Korean RRL  
If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of Article  
11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC)  
Framework requirements of the Radio Research Laboratory (RRL) Communications Commission, Republic of  
Korea.  
These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic Susceptibility  
(EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a Korean-recognized  
lab.  
• Family name: Pipeline HD  
• Certificate number: In process.  
Pipeline HD SATA Product Manual, Rev. F  
21  
                                                     
Drive Specifications  
Australian C-Tick (N176)  
If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ CISPR22  
and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian Communication  
Authority (ACA).  
2.14.3 FCC verification  
These drives are intended to be contained solely within a personal computer or similar enclosure (not attached as  
an external device). As such, each drive is considered to be a subassembly even when it is individually marketed  
to the customer. As a subassembly, no Federal Communications Commission verification or certification of the  
device is required.  
Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure,disk  
drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursuant to  
Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interference to  
radio and television reception.  
Radio and television interference. This equipment generates and uses radio frequency energy and if not  
installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio and  
television reception.  
This equipment is designed to provide reasonable protection against such interference in a residential installation.  
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does  
cause interference to radio or television, which can be determined by turning the equipment on and off, you are  
encouraged to try one or more of the following corrective measures:  
• Reorient the receiving antenna.  
• Move the device to one side or the other of the radio or TV.  
• Move the device farther away from the radio or TV.  
• Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.  
If necessary, you should consult your dealer or an experienced radio/television technician for additional  
suggestions. You may find helpful the following booklet prepared by the Federal Communications Commission:  
How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the  
Superintendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication  
number 004-000-00345-4.  
2.15 Environmental protection  
Seagate designs its products to meet environmental protection requirements worldwide, including regulations  
restricting certain chemical substances.  
2.15.1 European Union Restriction of Hazardous Substances (RoHS) Directive  
The European Union Restriction of Hazardous Substances (RoHS) Directive, restricts the presence of chemical  
substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic products,  
effective July 2006. This drive is manufactured with components and materials that comply with the RoHS  
Directive.  
2.15.2 China Restriction of Hazardous Substances (RoHS) Directive  
This product has an Environmental Protection Use Period (EPUP) of 20 years. The following table  
contains information mandated by China's "Marking Requirements for Control of Pollution Caused  
by Electronic Information Products" Standard.  
22  
Pipeline HD SATA Product Manual, Rev. F  
                               
Drive Specifications  
"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower  
than the threshold defined by the China RoHS MCV Standard.  
"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over the  
threshold defined by the China RoHS MCV Standard.  
2.16 Corrosive environment  
Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to light  
industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM B845.  
However, this accelerated testing cannot duplicate every potential application environment. Users should use  
caution exposing any electronic components to uncontrolled chemical pollutants and corrosive chemicals as  
electronic drive component reliability can be affected by the installation environment. The silver, copper, nickel  
and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate  
contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be  
exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an  
ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulcanized rubber, that  
can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment  
may be extended by replacing materials near circuitry with sulfide-free alternatives.  
Pipeline HD SATA Product Manual, Rev. F  
23  
   
Drive Specifications  
24  
Pipeline HD SATA Product Manual, Rev. F  
3.0 Configuring and Mounting the Drive  
This section contains the specifications and instructions for configuring and mounting the drive.  
3.1 Handling and static-discharge precautions  
After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic  
discharge (ESD) hazards. Observe the following standard handling and static-discharge precautions:  
Caution:  
• Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis  
of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation  
procedure.  
• Handle the drive by its edges or frame only.  
• The drive is extremely fragile—handle it with care. Do not press down on the drive top cover.  
• Always rest the drive on a padded, antistatic surface until you mount it in the computer.  
• Do not touch the connector pins or the printed circuit board.  
• Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids the  
warranty. Some factory-installed labels contain information needed to service the drive. Other labels are used to  
seal out dirt and contamination.  
3.2 Configuring the drive  
Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no  
master/slave relationship because each drive is considered a master in a point-to-point relationship. If two drives  
are attached on one Serial ATA host adapter, the host operating system views the two devices as if they were both  
“masters” on two separate ports. Both drives behave as if they are Device 0 (master) devices.  
Serial ATA drives are designed for easy installation. It is usually not necessary to set any jumpers on the drive for  
proper operation; however, if you connect the drive and receive a “drive not detected” error, your SATA-equipped  
motherboard or host adapter may use a chipset that does not support SATA speed autonegotiation.  
3.3 Serial ATA cables and connectors  
The Serial ATA interface cable consists of four conductors in two differential pairs, plus three ground connections.  
The cable size may be 30 to 26 AWG with a maximum length of one meter (39.37 in). See Table 6 for connector  
pin definitions. Either end of the SATA signal cable can be attached to the drive or host.  
For direct backplane connection, the drive connectors are inserted directly into the host receptacle. The drive and  
the host receptacle incorporate features that enable the direct connection to be hot pluggable and blind  
mateable.  
For installations which require cables, you can connect the drive as illustrated in Figure 3.  
Pipeline HD SATA Product Manual, Rev. F  
25  
                           
Configuring and Mounting the Drive  
Figure 3 Attaching SATA cabling  
Signal connector  
Power connector  
Signal cable  
Power cable  
Each cable is keyed to ensure correct orientation. Pipeline HD drives support latching SATA connectors.  
3.4 Drive mounting  
You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the  
bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting  
precautions when mounting the drive:  
• Allow a minimum clearance of 0.030 in (0.76mm) around the entire perimeter of the drive for cooling.  
• Use only 6-32 UNC mounting screws.  
• The screws should be inserted no more than 0.150 in (3.81mm) into the bottom or side mounting holes.  
• Do not overtighten the mounting screws (maximum torque: 6 in per lb).  
26  
Pipeline HD SATA Product Manual, Rev. F  
     
Figure 4 Mounting dimensions (2TB model)  
Recommended  
case temperature  
measurement  
location  
Pipeline HD SATA Product Manual, Rev. F  
27  
 
Configuring and Mounting the Drive  
Figure 5 Mounting dimensions (1TB model)  
Recommended  
case temperature  
measurement  
location  
28  
Pipeline HD SATA Product Manual, Rev. F  
 
4.0 Serial ATA Interface  
These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It supports  
ATA programmed input/output (PIO) modes 0 to 4; multiword DMA modes 0 to 2, and Ultra DMA modes 0 to 6.  
For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT  
Attachment” specification.  
4.1 Hot-Plug compatibility  
Pipeline HD drives incorporate connectors which enable you to hot plug these drives in accordance with the  
4.2 Serial ATA device plug connector pin definitions  
Table 6 summarizes the signals on the Serial ATA interface and power connectors.  
Table 6 Serial ATA connector pin definitions  
Segment Pin  
Function  
Ground  
A+  
Definition  
S1  
S2  
S3  
2nd mate  
Differential signal pair A from PHY  
A-  
Signal  
S4  
S5  
S6  
S7  
Ground  
B-  
2nd mate  
Differential signal pair B from PHY  
B+  
Ground  
2nd mate  
Key and spacing separate signal and power segments  
Pipeline HD SATA Product Manual, Rev. F  
29  
         
Serial ATA Interface  
Table 6 Serial ATA connector pin definitions (continued)  
Segment Pin  
Function  
V33  
Definition  
P1  
P2  
P3  
P4  
P5  
P6  
P7  
3.3V power  
V33  
3.3V power  
V33  
3.3V power, pre-charge, 2nd mate  
1st mate  
Ground  
Ground  
Ground  
V5  
2nd mate  
2nd mate  
5V power, pre-charge, 2nd mate  
5V power  
Power  
P8  
V5  
P9  
V5  
5V power  
P10  
P11  
P12  
P13  
P14  
P15  
Ground  
2nd mate  
Ground or LED signal If grounded, drive does not use deferred spin  
Ground  
V12  
1st mate.  
12V power, pre-charge, 2nd mate  
12V power  
V12  
V12  
12V power  
Notes:  
1. All pins are in a single row, with a 1.27mm (0.050”) pitch.  
2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this  
case, the mating sequences are:  
• the ground pins P4 and P12.  
• the pre-charge power pins and the other ground pins.  
• the signal pins and the rest of the power pins.  
3. There are three power pins for each voltage. One pin from each voltage is used for pre-charge when installed  
in a blind-mate backplane configuration.  
4. All used voltage pins (Vx) must be terminated.  
4.3 Supported ATA commands  
The following table lists Serial ATA standard commands that the drive supports.  
For a detailed description of the ATA commands, refer to the Serial ATA International Organization:  
Serial ATA Revision 3.0 (http://www.sata-io.org).  
Table 7 Supported ATA commands  
Command name  
Command code (in hex)  
Check Power Mode  
E5  
H
H
Configure Stream  
51  
Device Configuration Freeze Lock  
B1 / C1  
H
H
30  
Pipeline HD SATA Product Manual, Rev. F  
           
Serial ATA Interface  
Table 7 Supported ATA commands (continued)  
Command name  
Command code (in hex)  
Device Configuration Identify  
Device Configuration Restore  
Device Configuration Set  
Device Reset  
B1 / C2  
H
H
H
H
B1 / C0  
H
B1 / C3  
H
08  
92  
90  
H
H
H
Download Microcode  
Execute Device Diagnostics  
Flush Cache  
E7  
H
Flush Cache Extended  
Format Track  
EA  
H
50  
H
Identify Device  
EC  
H
Idle  
E3  
E1  
H
Idle Immediate  
H
H
Initialize Device Parameters  
Read Buffer  
91  
E4  
H
Read DMA  
C8  
H
Read DMA Extended  
Read DMA Without Retries  
Read FPDMA Queued  
Read Log Ext  
25  
H
C9  
H
60  
2F  
H
H
Read Multiple  
C4  
H
Read Multiple Extended  
Read Native Max Address  
Read Native Max Address Extended  
Read Sectors  
29  
F8  
27  
20  
H
H
H
H
Read Stream DMA Extended  
Read Stream Extended  
Read Sectors Extended  
Read Sectors Without Retries  
Read Verify Sectors  
Read Verify Sectors Extended  
Read Verify Sectors Without Retries  
Recalibrate  
2A  
H
2B  
H
H
H
H
H
H
H
H
24  
21  
40  
42  
41  
10  
F6  
Security Disable Password  
Pipeline HD SATA Product Manual, Rev. F  
31  
                                                           
Serial ATA Interface  
Table 7 Supported ATA commands (continued)  
Command name  
Security Erase Prepare  
Security Erase Unit  
Security Freeze  
Security Set Password  
Security Unlock  
Seek  
Command code (in hex)  
F3  
F4  
F5  
F1  
F2  
70  
H
H
H
H
H
H
Set Features  
EF  
H
H
Set Max Address  
F9  
Note: Individual Set Max Address  
commands are identified by the  
value placed in the Set Max Fea-  
Address:  
Password:  
Lock:  
00  
01  
02  
03  
04  
H
H
H
H
H
tures register as defined to the right. Unlock:  
Freeze Lock:  
Set Max Address Extended  
Set Multiple Mode  
37  
H
C6  
H
Sleep  
E6  
H
S.M.A.R.T. Disable Operations  
S.M.A.R.T. Enable/Disable Autosave  
S.M.A.R.T. Enable Operations  
S.M.A.R.T. Execute Offline  
S.M.A.R.T. Read Attribute Thresholds  
S.M.A.R.T. Read Data  
S.M.A.R.T. Read Log Sector  
S.M.A.R.T. Return Status  
S.M.A.R.T. Save Attribute Values  
S.M.A.R.T. Write Log Sector  
Standby  
B0 / D9  
H
H
H
H
H
H
H
H
B0 / D2  
H
B0 / D8  
H
B0 / D4  
H
B0 / D1  
H
B0 / D0  
H
B0 / D5  
H
B0 / DA  
H
H
H
H
B0 / D3  
H
B0 / D6  
H
E2  
E0  
E8  
H
H
H
Standby Immediate  
Write Buffer  
Write DMA  
CA  
H
Write DMA Extended  
35  
H
Write DMA FUA Extended  
Write DMA Without Retries  
Write FPDMA Queued  
Write Log Extended  
3D  
H
CB  
H
61  
3F  
H
H
32  
Pipeline HD SATA Product Manual, Rev. F  
                                                         
Serial ATA Interface  
Table 7 Supported ATA commands (continued)  
Command name  
Command code (in hex)  
C5  
Write Multiple  
H
Write Multiple Extended  
Write Multiple FUA Extended  
Write Sectors  
39  
H
CE  
H
30  
31  
34  
H
Write Sectors Without Retries  
Write Sectors Extended  
Write Stream DMA Extended  
Write Stream Extended  
Write Uncorrectable  
H
H
3A  
H
3B  
H
H
45  
4.3.1 Identify Device command  
The Identify Device command (command code EC ) transfers information about the drive to the host following  
H
power up. The data is organized as a single 4096-byte block of data, whose contents are shown on page 30. All  
reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or vary with the state  
of the drive.  
The following commands contain drive-specific features that may not be included in the Serial ATA specification.  
Table 8 Identify Device commands  
Word  
Description  
Value  
0C5A  
0
Configuration information:  
• Bit 15: 0 = ATA; 1 = ATAPI  
• Bit 7: removable media  
• Bit 6: removable controller  
• Bit 0: reserved  
H
1
Number of logical cylinders  
16,383  
2
ATA-reserved  
C837  
16  
H
3
Number of logical heads  
4
Retired  
0000  
0000  
003F  
0000  
H
5
Retired  
H
H
H
6
Number of logical sectors per logical track: 63  
Retired  
7–9  
10–19  
20  
Serial number: (20 ASCII characters, 0000 = none)  
ASCII  
H
Retired  
Retired  
Obsolete  
0000  
0000  
0000  
x.xx  
H
H
H
21  
22  
23–26  
Firmware revision  
(8 ASCII character string, padded with blanks to end of string)  
27–46  
Drive model number:  
(40 ASCII characters, padded with blanks to end of string)  
Pipeline HD SATA Product Manual, Rev. F  
33  
               
Serial ATA Interface  
Table 8 Identify Device commands (continued)  
Word  
Description  
Value  
47  
(Bits 7–0) Maximum sectors per interrupt on Read multiple and  
Write multiple (16)  
8010  
H
48  
Reserved  
0000  
H
H
H
H
H
H
49  
Standard Standby timer, IORDY supported and may be disabled 2F00  
50  
ATA-reserved  
4000  
0200  
0200  
0007  
51  
PIO data-transfer cycle timing mode  
Retired  
52  
53  
Words 54–58, 64–70 and 88 are valid  
Number of current logical cylinders  
Number of current logical heads  
Number of current logical sectors per logical track  
Current capacity in sectors  
54  
xxxx  
xxxx  
xxxx  
xxxx  
xxxx  
H
55  
H
H
H
H
56  
57–58  
59  
Number of sectors transferred during a Read Multiple  
or Write Multiple command  
60–61  
Total number of user-addressable LBA sectors available  
0FFFFFFFh*  
*Note: The maximum value allowed in this field is: 0FFFFFFFh  
(268,435,455 sectors, 137 Gbytes). Drives with capacities over  
137 Gbytes will have 0FFFFFFFh in this field and the actual num-  
ber of user-addressable LBAs specified in words 100-103. This is  
required for drives that support the 48-bit addressing feature.  
62  
63  
Retired  
0000  
H
Multiword DMA active and modes supported  
(see note following this table)  
xx07  
H
64  
65  
66  
Advanced PIO modes supported (modes 3 and 4 supported)  
0003  
H
H
H
Minimum multiword DMA transfer cycle time per word (120 nsec) 0078  
Recommended multiword DMA transfer cycle time per word  
(120 nsec)  
0078  
67  
Minimum PIO cycle time without IORDY flow control (240 nsec)  
Minimum PIO cycle time with IORDY flow control (120 nsec)  
ATA-reserved  
0078  
0078  
0000  
001F  
H
H
H
H
68  
69–74  
75  
Queue depth  
76  
Serial ATA capabilities  
xxxx  
xxxx  
xxxx  
xxxx  
H
77  
Reserved for future Serial ATA definition  
Serial ATA features supported  
Serial ATA features enabled  
H
H
H
78  
79  
80  
Major version number  
01F0  
H
34  
Pipeline HD SATA Product Manual, Rev. F  
Serial ATA Interface  
Table 8 Identify Device commands (continued)  
Word  
81  
Description  
Value  
0028  
Minor version number  
Command sets supported  
Command sets supported  
H
82  
346B  
7D69  
H
H
83  
84  
Command sets support extension  
(see note following this table)  
4133 See Word 108-111  
H
note. (4133 = 1000000100101  
H
binary)  
85  
86  
87  
88  
Command sets enabled  
34xx  
H
Command sets enabled  
BE01  
H
Command sets enable extension  
4133  
H
Ultra DMA support and current mode (see note following this  
table)  
00A4  
H
89  
Security erase time  
00A4  
00A9  
FFFE  
H
H
H
90  
Enhanced security erase time  
Master password revision code  
Hardware reset value  
ATA-reserved  
92  
93  
xxxx  
H
95–99  
0000  
H
100–103 Total number of user-addressable LBA sectors available (see  
drives that support the 48-bit addressing feature. Maximum  
value: 0000FFFFFFFFFFFFh.  
ST2000VM003 = 3,907,029,168  
ST1000VM002 = 1,953,525,168  
104–107 ATA-reserved  
0000  
H
108–111 The mandatory value of the world wide name (WWN) for the  
Each drive will have a unique  
drive. NOTE: This field is valid if word 84, bit 8 is set to 1 indicat- value.  
ing 64-bit WWN support.  
112–127 ATA-reserved  
128 Security status  
0000  
0001  
H
H
129–159 Seagate-reserved  
160–254 ATA-reserved  
xxxx  
H
0000  
xxA5  
H
H
255  
Integrity word  
Pipeline HD SATA Product Manual, Rev. F  
35  
Serial ATA Interface  
Automatic Acoustic Management (AAM) features are not supported.  
See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.  
Note  
Note  
Table 9 Bit Descriptions  
Description (if bit is set to 1)  
Bit  
0
Word 63  
Multiword DMA mode 0 is supported.  
Multiword DMA mode 1 is supported.  
Multiword DMA mode 2 is supported.  
Multiword DMA mode 0 is currently active.  
Multiword DMA mode 1 is currently active.  
Multiword DMA mode 2 is currently active.  
Word 84  
1
2
8
9
10  
Bit  
0
SMART error login is supported.  
SMART self-test is supported.  
1
2
Media serial number is supported.  
Media Card Pass Through Command feature set is supported.  
Streaming feature set is supported.  
GPL feature set is supported.  
3
4
5
6
WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported.  
WRITE DMA QUEUED FUA EXT command is supported.  
64-bit World Wide Name is supported.  
Obsolete.  
7
8
9-10  
11-12  
13  
14  
15  
Bit  
0
Reserved for TLC.  
IDLE IMMEDIATE command with IUNLOAD feature is supported.  
Shall be set to 1.  
Shall be cleared to 0.  
Word 88  
Ultra DMA mode 0 is supported.  
Ultra DMA mode 1 is supported.  
Ultra DMA mode 2 is supported.  
Ultra DMA mode 3 is supported.  
Ultra DMA mode 4 is supported.  
Ultra DMA mode 5 is supported.  
1
2
3
4
5
36  
Pipeline HD SATA Product Manual, Rev. F  
Serial ATA Interface  
Table 9 Bit Descriptions (continued)  
6
Ultra DMA mode 6 is supported.  
8
Ultra DMA mode 0 is currently active.  
Ultra DMA mode 1 is currently active.  
Ultra DMA mode 2 is currently active.  
Ultra DMA mode 3 is currently active.  
Ultra DMA mode 4 is currently active.  
Ultra DMA mode 5 is currently active.  
Ultra DMA mode 6 is currently active.  
9
10  
11  
12  
13  
14  
4.3.2 Set Features command  
This command controls the implementation of various features that the drive supports. When the drive receives  
this command, it sets BSY, checks the contents of the Features register, clears BSY and generates an interrupt. If  
the value in the register does not represent a feature that the drive supports, the command is aborted. Power-on  
default has the read look-ahead and write caching features enabled. The acceptable values for the Features  
register are defined as follows:  
Table 10 Set Features command values  
02  
03  
Enable write cache (default).  
H
H
Set transfer mode (based on value in Sector Count register).  
Sector Count register values:  
00 Set PIO mode to default (PIO mode 2).  
H
01 Set PIO mode to default and disable IORDY (PIO mode 2).  
H
08 PIO mode 0  
H
09 PIO mode 1  
H
0A PIO mode 2  
H
0B PIO mode 3  
H
0C PIO mode 4 (default)  
H
20 Multiword DMA mode 0  
H
21 Multiword DMA mode 1  
H
22 Multiword DMA mode 2  
H
40 Ultra DMA mode 0  
H
41 Ultra DMA mode 1  
H
42 Ultra DMA mode 2  
H
43 Ultra DMA mode 3  
H
44 Ultra DMA mode 4  
H
45 Ultra DMA mode 5  
H
46 Ultra DMA mode 6  
H
06  
Enable the PUIS feature set,  
H
Pipeline HD SATA Product Manual, Rev. F  
37  
 
Serial ATA Interface  
Table 10 Set Features command values (continued)  
07  
10  
55  
82  
86  
90  
07H PUIS feature set device spin-up  
Enable use of SATA features  
H
H
H
H
H
H
Disable read look-ahead (read cache) feature.  
Disable write cache.  
Disable the PUIS feature set.  
Disable use of SATA features.  
AA  
Enable read look-ahead (read cache) feature (default).  
Report full capacity available.  
H
F1  
H
At power-on, or after a hardware or software reset, the default values of the features are as indicated above.  
Note  
4.3.3 S.M.A.R.T. commands  
S.M.A.R.T. provides near-term failure prediction for disk drives. When S.M.A.R.T. is enabled, the drive monitors  
predetermined drive attributes that are susceptible to degradation over time. If self-monitoring determines that a  
failure is likely, S.M.A.R.T. makes a status report available to the host. Not all failures are predictable. S.M.A.R.T.  
predictability is limited to the attributes the drive can monitor. For more information on S.M.A.R.T. commands and  
implementation, see the Draft ATA-5 Standard.  
SeaTools diagnostic software activates a built-in drive self-test (DST S.M.A.R.T. command for D4 ) that eliminates  
H
unnecessary drive returns. The diagnostic software ships with all new drives and is also available at:  
This drive is shipped with S.M.A.R.T. features disabled. You must have a recent BIOS or software package that  
supports S.M.A.R.T. to enable this feature. The table below shows the S.M.A.R.T. command codes that the drive  
uses.  
Table 11 S.M.A.R.T. commands  
Code in features register S.M.A.R.T. command  
D0  
D2  
D3  
D4  
D5  
D6  
D8  
D9  
S.M.A.R.T. Read Data  
H
H
H
H
H
H
H
H
S.M.A.R.T. Enable/Disable Attribute Autosave  
S.M.A.R.T. Save Attribute Values  
S.M.A.R.T. Execute Off-line Immediate (runs DST)  
S.M.A.R.T. Read Log Sector  
S.M.A.R.T. Write Log Sector  
S.M.A.R.T. Enable Operations  
S.M.A.R.T. Disable Operations  
S.M.A.R.T. Return Status  
DA  
H
If an appropriate code is not written to the Features Register, the command is aborted and 0x04 (abort) is  
written to the Error register.  
Note  
38  
Pipeline HD SATA Product Manual, Rev. F  
 
Index  
Electrostatic discharge 20  
Electrostatic discharge (ESD) 25  
EN 55022, Class B 21  
EN 55024 21  
EN60950 21  
Enclosures 22  
Environmental specifications 18  
EPRML 9  
Error-correction algorithms 9  
ESD 25  
A
ACA 22  
Acceleration 19  
Acoustics 20  
Active 17  
Active mode 17  
Agency certification 21  
Altitude 18  
Ambient temperature 14, 18  
Areal density 9, 13  
ATA commands 30  
Australia/New Zealand Standard AS/NZ CISPR22 22  
Australian Communication Authority (ACA) 22  
Australian C-Tick 22  
Average latency 14  
EU RoHS directive 22  
European Union (EU) requirements 21  
Execute Device Diagnostics 31  
F
Average seek time 14  
FCC verification 22  
Features 9  
Flush Cache 31  
Flush Cache Extended 31  
Format Track 31  
Formatted capacity 13  
B
Buffer 14  
C
Cables and connectors 25  
Cache 14  
Capacity 13  
G
Geometry 13  
Guaranteed sectors 13  
CE mark 21  
Certification 21  
Check Power Mode 30  
China RoHS directive 22  
Compatibility 21  
Conducted noise 17  
Conducted RF immunity 20  
Configuring the drive 25  
Corrosive environment 23  
CSA60950-1 21  
H
Handling precautions 25  
Heads 13  
Height 14  
Humidity 18  
I
Cylinders 13  
I/O data-transfer rate 13  
Identify Device 31  
Identify Device command 33  
Idle 17, 31  
D
DC power 15  
Default logical geometry 13  
Device Configuration Freeze Lock 30  
Device Configuration Identify 31  
Device Configuration Restore 31  
Device Configuration Set 31  
Device Reset 31  
Idle Immediate 31  
Idle mode 15, 17  
Information Technology Equipment (ITE) 21  
Initialize Device Parameters 31  
Input noise ripple 17  
Input voltage 15  
Interface 13, 29  
Interference 22  
Dissipation 15  
Download Microcode 31  
Internal data-transfer rate OD 13  
ISO document 7779 20  
ITE 21  
E
Electrical fast transient 20  
Electromagnetic Compatibility (EMC) 21  
Electromagnetic Compatibility control Regulation 21  
Electromagnetic Compatibility Directive (2004/108/EC)  
K
KCC 21  
Korean Communications Commission 21  
Korean RRL 21  
Electromagnetic immunity 20  
Pipeline HD SATA Product Manual, Rev. F  
39  
Read Verify Sectors Without Retries 31  
Read/write heads 13  
Read/write power 15  
Recalibrate 31  
Recording density 13  
Recording method 13  
Recording technology 13  
Relative humidity 18  
Reliability 21  
L
Latency 14  
LBA mode 13  
Length 14  
Logical geometry 13  
M
Master/slave 10  
Mounting 26  
Mounting screws 18  
Mounting the drive 25  
RMS read/write current 17  
RoHS 22  
RRL 21  
N
S
Noise 17  
Nominal power 14  
Nonoperating shock 18  
Nonoperating vibration 19  
S.M.A.R.T. Disable Operations 32  
S.M.A.R.T. Enable Operations 32  
S.M.A.R.T. Enable/Disable Autosave 32  
S.M.A.R.T. Execute Offline 32  
S.M.A.R.T. implementation 30  
S.M.A.R.T. Read Attribute Thresholds 32  
S.M.A.R.T. Read Data 32  
S.M.A.R.T. Read Log Sector 32  
S.M.A.R.T. Return Status 32  
S.M.A.R.T. Save Attribute Values 32  
S.M.A.R.T. Write Log sector 32  
Safety certification 21  
Screws 18  
O
Operating 15  
Operating shock 18  
Operating vibration 19  
P
Physical characteristics 14  
Point-to-point 10, 25  
Power consumption 15  
Power dissipation 15  
Sectors 13  
Sectors per track 13  
Power modes 17  
Security Disable Password 31  
Security Erase Prepare 32  
Security Erase Unit 32  
Security Freeze 32  
Security Set Password 32  
Security Unlock 32  
Power specifications 15  
Power-management modes 17  
Power-on to Ready 14  
Precautions 25  
Printed circuit board 25  
Programmable power management 17  
Prominent discrete tone 20  
See “S.M.A.R.T. commands” on page 34 30  
Seek 32  
Seek time 14  
Serial ATA (SATA) interface 29  
Serial ATA ports 10  
Servo electronics 15  
Set Features 32  
R
Radiated RF immunity 20  
Radio and television interference 22  
Radio frequency (RF) 20  
Read Buffer 31  
Set Max Address 32  
Set Max Address Extended 32  
Set Multiple Mode 32  
Shock 18  
Single-track seeks 14  
Sleep 15, 17, 32  
Sleep mode 17  
Sound 20  
Specification summary table 11  
Spindle speed 13  
Spinup 15  
Spinup power 15  
Read DMA 31  
Read DMA Extended 31  
Read DMA without Retries 31  
Read Log Ext 31  
Read Multiple 31  
Read Multiple Extended 31  
Read Native Max Address 31  
Read Native Max Address Extended 31  
Read Sectors 31  
Read Sectors Extended 31  
Read Sectors Without Retries 31  
Read Verify Sectors 31  
Read Verify Sectors Extended 31  
Standby 15, 17, 32  
Standby Immediate 32  
40  
Pipeline HD SATA Product Manual, Rev. F  
Standby mode 15, 17  
Standby timer 17  
Standby to Ready 14  
Start/stop times 14  
Static-discharge 25  
Subassembly 22  
Surge immunity 20  
T
Temperature 14, 18  
Temperature gradient 18  
Timer 17  
Timers 17  
Track density 13  
Track-to-track 14  
Track-to-track seek time 14  
Tunneling magnetoresistive (TMR) recording heads 9  
U
UL60950-1 21  
V
Vibration 19  
Voltage 15  
Voltage dips, interrupts 20  
Voltage tolerance 17  
W
Weight 14  
Wet bulb temperature 18  
Width 14  
Write Buffer 32  
Write DMA 32  
Write DMA Extended 32  
Write DMA FUA Extended 32  
Write DMA Without Retries 32  
Write Log Extended 32  
Write Multiple 33  
Write Multiple Extended 33  
Write Multiple FUA Extended 33  
Write Sectors 33  
Write Sectors Extended 33  
Write Sectors Without Retries 33  
Pipeline HD SATA Product Manual, Rev. F  
41  
42  
Pipeline HD SATA Product Manual, Rev. F  
Seagate Technology LLC  
AMERICAS  
ASIA/PACIFIC  
Seagate Technology LLC 10200 South De Anza Boulevard, Cupertino, California 95014, United States, 408-658-1000  
Seagate Singapore International Headquarters Pte. Ltd. 7000 Ang Mo Kio Avenue 5, Singapore 569877, 65-6485-3888  
EUROPE, MIDDLE EAST AND AFRICA Seagate Technology SAS 16-18 rue du Dôme, 92100 Boulogne-Billancourt, France, 33 1-4186 10 00  
Publication Number: 100633414, Rev. F  
May 2012  

Toshiba AAT18ZIF25 User Manual
Sony CMD MZ5 User Manual
Sony CD Walkman D F411 User Manual
Siemens ST55 User Manual
Samsung SGH X506 User Manual
Samsung SGH N100 User Manual
Sagem my501x User Manual
Sagem 910 User Manual
Rotel RCC 940AX User Manual
Pioneer CD Player CDJ 2000nexus User Manual