Sanyo SCP 7050 User Manual

USER GUIDE

SCP 7050

Table of Contents

1. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Turning Your Phone ON and OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Turning Your Phone ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Turning Your Phone OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Using the Phone Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Using the Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Attaching the phone to the holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Removing the phone from the holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Selecting Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16

Missed Call Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

End-of-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Saving a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Finding a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21

Dialing and Saving Phone Numbers With Pauses . . . . . . . . . . . . . . . . . . . .22

Dialing From the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Using Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Using Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Selecting a Character Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Entering Characters Using Alphabet Mode . . . . . . . . . . . . . . . . . . . . . . . . . .27

Setting the Default Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28

2. Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29

Adjusting the Phone’s Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Selecting Vibrate Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Selecting a Tone Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Setting a Start-up/Power-off Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Using Voice Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31

Setting Up Key Press Echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32

Silence All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Changing the Phone’s Menu Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Changing the Backlight Time Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Changing the Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Changing the Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Changing the Display Screen Animation . . . . . . . . . . . . . . . . . . . . . . . . . . . .35

Changing the Display for Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Changing the Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36

Changing the Clock/Calendar Display for Standby Mode . . . . . . . . . . . . .36

Changing the Font Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Setting Return to Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Setting Message Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Setting Push Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Editing Canned Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40

Setting Your Callback Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Setting Your Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Setting Drafts Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42

TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

My Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Setting the Text Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Auto Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45

Setting the Open/Close Flip Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Setting Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Setting Power On to Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47

Headset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Setting Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Setting Side Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

Changing the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49

3. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50

Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52

Erasing Phone Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Resetting the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53

Resetting Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

4. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Recognizing Icons on the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Roaming on Other Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55

5. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Menu Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

6. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58

Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59

Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . .60

Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . .60

Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60

7. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Assigning a Group Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61

Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Finding Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62

Finding Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Finding Group Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .64

Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Erasing a Contacts Entry From the List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

Dialing Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68

8. Personal Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Displaying Your Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Changing the Calendar Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69

Adding a schedule to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70

Adding a Call Alarm to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

Adding To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Adding a To Do List Item to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Event Alert Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Viewing Day’s Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73

Editing an Event on the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Event List Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Erasing Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Going to a Specified Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76

Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Using the Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77

Using the Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Using the Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78

Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Displaying Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Finding Icon Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Displaying the Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

Displaying Advanced Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80

9. Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81

Making a Call Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . .81

Programming Voice Dial Tag to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .81

Voice Dial Tag Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Erasing All Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Managing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Recording Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Recording Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Reviewing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Erasing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Voice Memo Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Setting the Recording Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Setting the Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Setting the Audio Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Activating Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Selecting an Announcement for Screen Call . . . . . . . . . . . . . . . . . . . . . . . . .87

Recording Name for a Pre-Recorded Announcement . . . . . . . . . . . . . . . .87

Recording a Customized Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Reviewing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Erasing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

10. 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Starting 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Setting 10-4 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

10-4 Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89

Making and Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Displaying the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Selecting a Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90

Making a 10-4 Call (1-to-1 Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91

Making a 10-4 Call (Group Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Making a 10-4 Call by Entering a Number . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Making a 10-4 Call Using the Call List Key . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Missed Call Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93

Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94

10-4 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95

Adding and Editing 10-4 Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Copying an Entry to your Personal List , Personal Group List, or

Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Saving a 10-4 Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96

Finding an Entry in the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97

Adding a New Contacts Entry to Your Personal List . . . . . . . . . . . . . . . . . .97

Adding a New Group to Your Personal Group List . . . . . . . . . . . . . . . . . . .98

Editing a Contacts Entry in Your Personal List . . . . . . . . . . . . . . . . . . . . . . .99

Editing a Group in Your Personal Group List . . . . . . . . . . . . . . . . . . . . . . . .99

Erasing 10-4 List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Erasing an Entry in Your Personal List or Personal Group List . . . . . . . .100

Erasing a 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Updating the Company List and Personal List . . . . . . . . . . . . . . . . . . . . . . .101

Managing 10-4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Setting Speed Dialing for 10-4 Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101

Setting 10-4 Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Setting Ringer Types for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Setting the Ringer Volume for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Setting a Vibrate Pattern for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

Setting an Alert Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . .103

Setting the Speakerphone for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .103

Selecting the Default View of the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . .103

Setting the Floor Display of the 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . .103

11. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104

Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105

Creating Folders for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106

Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

Erasing Selected Messages in All Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . .107

12. Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Accessing the Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Bluetooth Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Bluetooth Settings: Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Bluetooth Settings: Voice Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Bluetooth Settings: My Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Bluetooth Settings: My Device Information . . . . . . . . . . . . . . . . . . . . . . . .110

Setting Auto-Accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110

Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111

Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Paired Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Waiting for Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112

Using the Trusted Devices Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

Printing Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114

Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115

13. Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Voicemail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Displaying Voicemail Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116

Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Clearing the Message Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Editing Your Voicemail Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118

Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Launching the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Net Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Browsing the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119

Downloading through the Wireless Web . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

Using Application Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122

14. Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

Maintaining Your Phone’s Peak Performance . . . . . . . . . . . . . . . . . . . . . . . .123

Using Your Phone While Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

Following Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123

Using Your Phone Near Other Electronic Devices . . . . . . . . . . . . . . . . . . .124

Turning Off Your Phone Before Flying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124

Turning Off Your Phone in Dangerous Areas . . . . . . . . . . . . . . . . . . . . . . . .125

Restricting Children’s Access to Your Phone . . . . . . . . . . . . . . . . . . . . . . . .126

Protecting Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126

Disposal of Lithium Ion (Li-Ion) Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129

SCP-7050

User Guide

1. The Basics

Front View of Your Phone

1. Earpiece

19. Battery Strength

Indicator

2. Signal Strength

Indicator

3. Main LCD (display)

4. Navigation Key

5. Softkey (left)

18. Softkey (right)

17. Side Call Key

16. BACK Key

6. MENU/OK Key

7. WEB Key

8. TALK Key

15. Call List Key

14. END/POWER Key

9. SPEAKER Key

13. Keypad

10. Microphone

11. Accessory Jack

12. Charger Jack

23. Antenna

20. LED

Indicator

24. Headset Jack

25. 10-4 Key

21. Speaker

22. Sub LCD

26. Side Volume Key

KeyFeatures

1. Earpiece lets you hear the caller and automated prompts.

2. SignalStrengthIndicator represents the signal strength by

displaying bars. The more bars displayed, the better the signal

strength.

3. MainLCD(display) displays all the information needed to

operate your phone, such as the call status, the Contacts list,

the date and time, and the signal and battery strength.

4. NavigationKey lets you navigate quickly and easily through the

menu options. These keys can also be reassigned to create

customized shortcuts. Default settings are: Right: Contacts,

Left: My Favourites, Up: Send Text, and Down: My Content.

5. Softkey(left) lets you select the menu corresponding to the

bottom left line on the Main LCD.

6. MENU/OKKey lets you access the phone’s menus and select

menu options.

7. WEBKey lets you launch the Web browser.

8. TALKKey lets you place or receive calls, answer Call Waiting,

use Three-Way Calling, or activate Voice Dial.

9. SPEAKERKey lets you place or receive calls in speakerphone

mode.

10. Microphone allows other callers to hear you clearly when you

are speaking to them.

11. AccessoryJack allows you to connect a USB cable (not

included). CAUTION! Inserting an accessory into the incorrect

jack may damage the phone.

12. ChargerJack connects the phone to the phone charger

(included).

13. Keypad lets you enter numbers, letters, and characters, and

navigate within menus. Press and hold keys 2-9 for speed

dialing.

14. END/POWERKey lets you turn the phone on/off, end a call, or

return to standby mode. While in the main menu, it returns

the phone to standby mode and cancels your input. When you

receive an incoming call, press to enter silent mode and mute

the ringer.

15. CallListKey displays the Recent Calls list if the phone is closed.

16. BACKKey lets you display the previous page or clear characters

from the screen.

17. SideCallKey lets you place calls without opening the phone.

Press and hold to make a voice dial or to redial with the phone

closed.

18. Softkey(right) lets you select the menu corresponding to the

bottom right line on the Main LCD.

19. BatteryStrengthIndicator represents the amount of remaining

battery charge currently available in your phone. When all

bars are displayed in the battery icon, the phone’s battery is

fully charged. When no bars are displayed, the phone’s

battery is completely discharged.

20. LEDIndicator shows your phone’s connection status at a glance.

21. Speaker lets you hear different ringers and sounds. You can

mute the ringer when receiving incoming calls by pressing

, or any of the side keys. The speaker also lets you

hear the caller’s voice in speakerphone mode.

22. SubLCD lets you monitor the phone’s status and see who’s

calling without opening the phone.

23. Antenna delivers the best reception when fully extended.

24. HeadsetJack allows you to plug in an optional monaural

headset for convenient, hands-free conversations.

CAUTION! Inserting an accessory into the incorrect jack may

damage the phone.

25. 10-4Key allows you to access 10-4 List. (See “10-4”on page 89.)

26. SideVolumeKey allows you to adjust the ringer volume in

standby mode (with the phone open) or adjust the voice

volume during a call. To mute the ringer during an incoming

call, press the volume key up or down. The volume key can

also be used to scroll up or down to navigate through the

different menu options.

Viewing the Display Screen

Thislistidentifiesthesymbolsyou’llseeonyourdisplayscreen.

shows your current signal strength. The more lines you

have, the stronger your signal.

means your phone cannot find a signal.

indicates the call is on hold.

indicates a call is in progress.

indicates the 10-4 service is available.

indicates the 10-4 service is unavailable.

indicates the 10-4 service is enabled and the

speakerphone mode is set to on.

indicates you have missed 10-4 calls.

indicates 1X Data/10-4 access is dormant. (Voice calls

can still be made or received.)

indicates 1X Data/10-4 access is active.

indicates 1X Data/10-4 access is disabled.

indicates 1X Service is available.

indicates you are off the home network.

indicates you have missed voice calls.

indicates you have scheduled events or call alarms.

indicates you have alarm clock and/or countdown

notifications.

indicates you have new text messages or Web Alerts

waiting.

indicates you have new picture messages.

indicates you have new voicemail messages.

indicates you have urgent messages.

indicates you have two or more different types of missed

alerts (missed voice calls and other missed alarm clocks,

call alarms, or scheduled events).

indicates the Bluetooth feature is enabled (blue icon).

indicates the handset is connected to a Bluetooth device

(green icon).

indicates the handset is discoverable by another

Bluetooth device.

indicates the handset is communicating with a Bluetooth

device.

indicates your access to a secure site.

shows the level of your battery charge. The more black

you see, the more power you have left. (The icon is

animated while the battery is charging.)

indicates your battery is charging in “Power Off” state.

indicates all the sound settings (except for applications)

are off and the vibrate feature is set.

indicates volume level 1 to 8 and vibrate feature are set.

indicates 1-beep feature is set.

indicates 1-beep and vibrate feature are set.

indicates all ringer settings are off.

indicates all ringer settings are off and the vibrate feature

is set.

indicates all the sound settings are OFF.

indicates the Location Service of your phone is enabled.

indicates the Location Service of your phone is disabled.

indicates you have a new voice message when Screen

Call is activated.

indicates the Screen Call auto setting is enabled.

indicates the Alarm Clock and/or Countdown is set.

indicates your phone is in TTY mode.

indicates the speakerphone mode is set to on.

indicates a call is in progress using the Bluetooth device.

indicates the wired Car Kit device is set to on.

indicates the wired Headset device is set to on.

indicates you have an alert about Java applications.

Turning Your Phone ON and OFF

Turning Your Phone ON

ᮣ

Press

Once your phone is on, it displays “Looking for service...” which

indicates that your phone is searching for a signal. When your

phone finds a signal, it automatically enters standby mode. At

this point, you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated.

When a signal is found, your phone automatically returns to

standby mode.

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also initiate a

search for service by pressing any key (when your phone is

turned on).

Tip: The Power Save feature helps to save your battery power when you

are in an area where there is no signal.

Turning Your Phone OFF

ᮣ

Press and hold

for two seconds until you see the

powering down animation on the display screen.

Your screen remains blank while your phone is off (unless the

battery is charging).

Using the Battery

Installing the Battery

1. Insert the battery into the opening on the back of the phone

and gently press it down.

2. Place the battery cover, and then slide it upward until you

hear it snap into place.

3. Slide the battery cover release lever as indicated in the

diagram shown below.

Removing the Battery

Warning! Do not handle a damaged or leaking Li-Ion battery as you can

be burned.

1. Make sure the power is off so that you don’t lose any stored

numbers or messages.

2. Slide the battery cover release lever as indicated in the

diagram shown below and slide the battery cover downward

and remove it.

3. Use your thumbnail to lift and then remove the battery as

indicated in the diagram.

Charging the Battery

Your phone comes with a rechargeable battery. You should

charge the battery as soon as possible so you can begin using

your phone.

Keeping track of your battery’s charge is important. If your

battery level becomes too low, your phone automatically turns

off and you will lose all the information you were just working

on. For a quick check of your phone’s battery level, glance at the

battery charge indicator located in the upper-right corner of

your phone’s display screen. If the battery charge is getting too

low, the battery icon

warning message.

appears and the phone displays a

Always use an approved travel charger or vehicle power adapter

to charge your battery.

Warning! Using the wrong battery charger could cause damage to your

phone and void the warranty.

Note: Long backlight settings, searching for service, vibrate mode, and

browser use affect the battery’s talk and standby times.

Using the Phone Charger

1. Plug the charger into a wall outlet.

2. Plug the other end of the charger into the charger jack at the

bottom of your phone (with the battery installed).

Using the Holster

Attaching the phone to the holster

1. With the front of the phone facing the holster, insert the

bottom of the phone into the holster.

2. Press the phone down into the holster until it snaps into

place.

Removing the phone from the holster

1. With your forefinger, push against the holster’s top plate

while gripping the phone at the sides.

2. The phone can now be easily removed from the holster.

Navigating Through Phone Menus

The navigation key on your phone allows you to scroll through

menus quickly and easily. The scroll bar at the right of the menu

keeps track of your position in the menu at all times.

To navigate through a menu, simply press the navigation key up

or down. If you are in a first-level menu (after selecting an item

in the main menu), you may also navigate to the next or previous

first-level menu by pressing the navigation key right or left.

For a diagram of your phone’s menu, please see “Menu

Navigation”on page 56.

Selecting Menu Items

As you navigate through the menu, menu options are highlighted.

Select any numbered option by simply pressing the

corresponding number on the phone’s keypad. You may also

select any item by highlighting it and pressing

For example, if you want to view your last incoming call:

1. Press to access the main menu.

Note: You can select List View or Grid View for your phone’s menu style

(see “Changing the Phone’s Menu Style” on page 34).

2. Select CallHistory by highlighting it and pressing

or by

pressing

(when in List View).

3. Select Incoming by pressing

or by highlighting it and

pressing . (If you have received any calls, they are displayed

on the screen.)

Note: For the purposes of this guide, the above steps condense into

“Select

> Call History > Incoming.”

Displaying Your Phone Number

ᮣ

Select

>Settings>PhoneInfo>MyPhone#. (Your phone

number and other information about your phone and account

will be displayed.)

Tip: You can also display your phone number through the Contacts menu.

Select

> Contacts > My Name Card. To send your contact information

using Bluetooth, press

(right softkey) > Send via Bluetooth.

Options

Making and Answering Calls

Making Calls

Toplaceacallwiththephoneopen:

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If you make a

mistake while entering, press

to erase one digit at a time.

Press and hold

to erase the entire number.)

3. Press or

4. When you’re finished, press

or close the phone.

Tip: You can also place calls from your phone by using speed dialing

(page 23), and by using your Call History listings (page 58).

To redial your most recent call (outgoing, incoming, or missed),

press

twice.

IMPORTANT: To maximize performance when using your phone, extend

the antenna before a call and do not touch the antenna during a call.

Correct

Incorrect

Toplaceacallwiththephoneclosed:

1. Make sure your phone is on and the Side Key Guard feature is

disabled. (See “Setting Side Key Guard” on page 49.)

2. Press and hold Side Call key (

) on the right side of the

phone.

3. Follow the system prompts and say the name of your

registered voice dial tag (see the note below).

The call will be made in speakerphone mode unless you have a

headset or other accessory attached to the phone.

Note: To use a Voice Dial, you must have stored voice dial tags. (See

“Using Voice-Activated Dialing” on page 81.)

Toredialwiththephoneclosed:

1. Press the Call List key (

). Recent Calls list appears on the

sub LCD.

2. Use the Side Volume key (

) to highlight a Call History

entry you would like to redial.

3. Press and hold

Tip: To redial your most recent call, press and hold

again.

and press

Dialing Options

Dialing options are displayed when you press

(right

Options

softkey) after entering numbers in standby mode.

ⅷ

Abbrev. Dial to use the Abbreviated Dialing feature. (See

“Setting Abbreviated Dialing” on page 47 and “Using

Abbreviated Dialing” on page 24.)

ⅷ

Call to dial the phone number.

Call:SpeakerOn to dial the phone number in speakerphone

mode.

ⅷ

SendMessage to send a text message (see page 105).

SavePhone# to save the phone number in your Contacts. (See

“Saving a Phone Number” on page 21.)

ⅷ

Find to display Contacts entries that end with the digits you

entered. (See “Finding a Phone Number” on page 21.)

P HardPause to insert a hard pause. (See “Dialing and Saving

Phone Numbers With Pauses” on page 22.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and

Saving Phone Numbers With Pauses” on page 22.)

Hyphen to insert a hyphen manually where you like.

Answering Calls

Toansweranincomingcallwiththephoneopen:

1. Make sure your phone is on. (If your phone is off, incoming

calls go to voicemail.)

2. Press

to answer an incoming call. (Depending

on your phone’s settings, you may also answer incoming calls

by pressing any number key. See “Setting Any Key Answer” on

page 45 for more information.)

Toansweranincomingcallwiththephoneclosed:

1. Make sure your phone is on. (If your phone is off, incoming

calls go to voicemail.)

2. When your phone rings or vibrates, press and hold

right side of the phone. (The call will be answered in

speakerphone mode.)

on the

– or –

Open the phone to use the earpiece.

Note: If the Open menu of the Open/Close Flip feature is set to

No Action, opening the phone will not answer the call. (See “Setting the

Open/Close Flip Option” on page 46.)

Your phone notifies you of incoming calls in the following ways:

ⅷ

The phone rings and/or vibrates.

ⅷ

The LED flashes.

ⅷ

The backlight illuminates.

ⅷ

The screen displays an incoming call message.

ⅷ

If available, the phone number of the caller is displayed.

ⅷ

If the phone number is in your Contacts, the Contacts entry’s

name is displayed.

The following options are also displayed by pressing

(right softkey).

Options

Note: If you set the Open menu of the Open/Close Flip feature to

Answer Call, and if you open the phone when you receive a call, the

options below are not available.

ⅷ

Answer to answer the call.

ⅷ

Answer:Speaker to answer the call in speakerphone mode.

ⅷ

SelectAudio to switch the call to your desired device (if

available).

AnsweronHold to put the call on hold. (See “Setting Answer

on Hold” shown below.)

ScreenCall to answer the call by using pre-recorded

announcement. (See “Setting Up Screen Call” on page 87.)

QuietRinger to mute the ringer. (This feature appears when

the ringer is set.)

Tip: Your phone offers additional ways to answer calls. (See page 45 for

Any Key Answer and for Auto Answer.)

SettingAnsweronHold

This feature allows you to hold an incoming call when you

cannot answer immediately.

TosetAnsweronHold:

Options

1. When you receive an incoming call, press

(right

softkey).

2. Select AnsweronHold. (The caller hears a message while

waiting for you to answer. will display on the screen while

the call is on hold.)

Toresumethecall:

ᮣ

Answer

Press

– or –

Press

(left softkey) or

Options

(right softkey), select Answer or Answer:Speaker.

EndingaCall

ᮣ

Close the phone or press

Note: If the Close menu of the Open/Close Flip feature is not set to End,

closing the phone will not end the call. (See “Setting the Open/Close Flip

Option” on page 46.)

Missed Call Notification

When an incoming call is not answered, the missed call log is

displayed on your screen.

Tocallthemissedcallentryfromthenotificationscreen:

ᮣ

Call

Press

(left softkey).

Tip: If you have two or more notifications, the Missed Alerts list will

appear.

TodisplaytheMissedAlertslistfromstandbymode:

1. Select

>MissedAlerts.

2. Select the entry you wish to view and press

Calling Emergency Numbers

WXYZ

You can place calls to 911 (dial

and press

even if your phone is locked or your account is restricted. Once

Options

the connection is established, press

display 911 options:

(right softkey) to

ⅷ

SpeakerOn to activate speakerphone mode. (If you are in

speakerphone mode, the option will appear as SpeakerOff to

deactivate.)

ⅷ

UnlockPhone to unlock your phone (appears only if the phone

is locked).

CloseMenu to close the pop-up menu (appears only if the

phone is unlocked).

My Phone

emergency call.

Tip: Press

(left softkey) to display your phone number during

Emergencymodeoptions:

If you end the emergency call by pressing

, the phone

Options

enters the Emergency mode. Press

(right softkey) to

display the Emergency mode options:

ⅷ

Call911 to call 911 again.

ⅷ

Call911:Speaker to call 911 in speakerphone mode.

ⅷ

ExitEmergency to exit Emergency mode.

Note: Emergency mode automatically times out after 5 minutes.

In-Call Options

During a call, your phone displays menu options by pressing

Options

(right softkey).

ⅷ

Flash to answer an incoming call while putting the current call

in Call Waiting or connect a third party for a Three-Way Call.

Mute or Unmuteto mute or reactivate your phone’s

microphone.

TransferAudio to switch the call to your desired device (if

applicable).

SpeakerOn or SpeakerOff to activate or deactivate

speakerphone mode.

Ⅲ

SpeakerOn to route the phone’s audio through the

speaker. (You can adjust the speaker volume using

Ⅲ

SpeakerOff to use the phone’s earpiece.

Warning! Due to higher volume levels, do not place the phone near your

ear during speakerphone use.

ⅷ

Three-WayCall to call a third party.

ⅷ

MissedAlerts to display missed notifications.

ⅷ

CallHistory to access the Call History menu. (See “Managing

Call History” on page 58.)

ⅷ

Contacts to access the Contacts menu. (See “Using Contacts”

on page 61.)

ⅷ

Messaging to access the Messaging menu. (See “Messaging”

on page 104.)

ⅷ

Calendar to access the Calendar menu. (See “Using Your

Phone’s Calendar” on page 69.)

ⅷ

Tools to access the Tools menu. (See “Using Your Phone’s

Tools” on page 77.)

ⅷ

Settings to access the Settings menu. (See “Your Phone’s

Settings” on page 29.)

Note: Flash appears only in Call Waiting and in Three-Way Calling. Mute

does not appear during a 911 call.

During a call, both the left softkey and

function as a mute

key. Press either one to mute the phone’s microphone for

privacy. Press it again to unmute the phone.

End-of-Call Options

Options

To display the following options, press

(right softkey)

within 10 seconds after disconnecting a call.

ⅷ

CallAgain to dial the phone number.

ⅷ

Call:Speaker On to dial the phone number in speakerphone

mode.

ⅷ

SendMessage to send a text message.

SavePhone# to save the phone number in your Contacts.

Ⅲ

GotoPhoneBook appears when the number is already in

your Contacts. (See “Saving a Phone Number” on

page 21.)

ⅷ

Rename to change the current entry’s name to the Caller ID

name (if applicable).

Note: The End-of-Call options are not displayed for calls identified as

No ID or Restricted.

Send Msg

Tip: You can also choose to send a message by pressing

softkey).

(left

Saving a Phone Number

Your phone can store up to seven phone numbers in each of

500 Contact entries with up to 700 total numbers. Each entry’s

name can contain 32 characters. Your phone automatically sorts

the Contacts alphabetically. (For more information, see “Using

Contacts” on page 61.)

Options

1. Enter a phone number and press

(right softkey) >

SavePhone#.

2. Select NewName or FromPh. Book.

Ⅲ

NewName to create a new Contacts entry for the

number.

Ⅲ

FromPh. Book to save the number to an existing entry.

(This step is not necessary on the very first entry in your

Contacts.)

3. Select a label and press

4. Enter a name for the new entry using the keypad and press

– or –

Search for an existing contact name and press

new number.

to save the

Save

Done

(left softkey).

5. Press

(left softkey) >

Finding a Phone Number

You can search Contacts entries for phone numbers that contain

a specific string of numbers.

1. Enter the last four or more digits of the number in standby

mode. (The more numbers you enter, the more specific the

search becomes.)

Options

2. Press

(right softkey) >Find. (The Contacts entry

matching the entered numbers will be displayed.)

3. Highlight your desired entry.

Ⅲ

Press

to display the entry details.

or to dial.

Ⅲ

Dialing and Saving Phone Numbers With Pauses

You can dial or save phone numbers with pauses for use with

automated systems, such as voicemail or credit card billing

numbers.

There are two types of pauses available on your phone:

ⅷ

HardPause to send the next set of numbers when you press

ⅷ

2-Sec. Pause toautomatically send the next set of numbers

after two seconds.

Note: You can have multiple pauses in a phone number and combine

2-second and hard pauses.

Options

1. Enter the phone number and press

(right softkey).

2. Select either HardPause or 2-Sec. Pause. Hard Pause is

displayed as a “P” and 2-second pause as a “T”.

3. Enter additional numbers.

4. To dial the number, press

. (When dialing a

number with a hard pause, press

to send the next set of

numbers.)

– or –

Options

To save the number in your Contacts, press

softkey) > SavePhone#.

(right

Note: The use of Hard Pause or 2-Sec. Pause will disengage the ability

to adjust the volume level of the call using

Dialing From the Contacts List

1. Select

2. Select the entry you want to call and press

3. Highlight the number you wish to call and press

>Contacts>Find/AddEntry.

Note: The icon next to each entry represents the labels (for example,

Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle

next to the icon means there are other phone numbers for the entry.

Press the navigation key right or left to select other number.

Using Speed Dialing

With this feature, you can dial your favourite entries using one

key press for locations 2-9. (See “Assigning Speed Dial Numbers”

on page 66.)

Tousespeeddial:

ᮣ

From standby mode, press and hold the appropriate key for

approximately two seconds.

– or –

ᮣ

From standby mode, press the appropriate key and press

The display confirms that the number has been dialed when it

shows “Connecting...”.

Using Abbreviated Dialing

Abbreviated Dialing is similar to speed dialing. You can use

either of the following abbreviated dialing features.

ⅷ

Ph. BookMatch to retrieve any desired number saved in your

Contacts by entering only the last three to six digits of the

number. This feature becomes available when you enable

Abbreviated Dialing feature. (See “Setting Abbreviated

Dialing” on page 47.)

ⅷ

Prepend to predefine the first five- or six-digit prefix you wish

to use for abbreviated dialing, so that you can dial a number by

entering only the last four or five digits of the number. This

feature becomes available when you enable Abbreviated

Dialing feature. (See “Setting Abbreviated Dialing” on

page 47.)

ToplaceacallusingPh.BookMatchabbreviateddialing:

1. Enter the last 3-6 digits of a Contacts entry’s phone number

saved in your Contacts.

2. Press

ToplaceacallusingPrependabbreviateddialing:

1. Enter the last four or five digits of your desired number.

2. Press

Note: If the digits match more than one entry, the Abbrev. Dial list will

be displayed; select the correct entry and press again.

When Prepend is set to Enable and Ph. Book Match is set to

Disable, you can display the 10-digit number (including the

predefined prepend number) by entering the last four or five digits

of the number.

When both Ph. Book Match and Prepend are set to Enable and

your desired number is not saved in Contacts, you can display

the 10-digit number (including the five- or six-digit prepend

number) by entering the last four or five digits of the number.

Options

Tip: You can also place a call by pressing

select Abbrev. Dial after step 1 above.

(right softkey) and

Entering Text

Selecting a Character Input Mode

Your phone provides convenient ways to enter words, letters,

punctuation, and numbers whenever you are prompted to enter

text (for example, when adding a Contacts entry or when

sending text messages).

1. When you display a screen where you can enter text,

Mode

press

(right softkey).

2. Select a character input mode and press

Note: The menus displayed vary according to the entry field. If you see

triangles on the right of the menu, you can press the right and left

navigation keys to switch between related menus.

Ⅲ

Alphabet to enter characters by using the keypad (see

page 27).

Ⅲ

T9Word to enter characters using T9 Text Input (see

page 26).

Ⅲ

SYMBOL to enter symbols.

Ⅲ

SMILEYS to enter smiley pictures.

Ⅲ

Emoticons to enter an emotion icon.

Ⅲ

WebShortcuts to enter web shortcuts (for example,

www., http://, or, .com).

Ⅲ

CannedMessages to enter canned messages (see page 40).

Ⅲ

RecentMessages to enter messages used recently (if

applicable).

Ⅲ

PasteList to paste copied or cut text (if applicable).

Ⅲ

Fr. ScheduleListto use words you added in your Calendar

as Schedule (see page 70).

Ⅲ

FromToDoListtousewordsyouaddedinyourCalendaras

To Do (see page 72).

Ⅲ

NUMBER to enter numbers.

Ⅲ

Signature to enter your signature (see page 41).

Ⅲ

SelectLanguage to select the language (English or French).

Ⅲ

EraseAll to erase all text (if applicable).

Ⅲ

SelectText to select stored text for copying or cutting.

AddWord to store words that you use frequently.

Shift

Tip: Before entering text, press the

key to change letter capitalization

: Abc > ABC > abc (Alphabet Mode)

: T9w > T9W > t9w (T9 Text Input Mode).

Entering Characters Using T9 Text Input

T9 Text Input lets you enter text in your phone by pressing keys

just once per letter. (To select the T9Word mode when entering

text, see “Selecting a Character Input Mode” on page 25.)

T9 Text Input analyses the letters you enter using an intuitive

word database and creates a suitable word. (The word may

change as you type.) To accept a word and insert a space,

Space

press

Tip: In order to insert a space by pressing , Auto-Space must be on

(see page 45).

If you make a mistake, press

to erase a single character. Press

and hold

to delete an entire entry.

AddingaWordtotheT9Database

If a word you want to enter does not display as an option when

you are using T9 Text Input, you can add it to the database.

ToaddawordtotheT9TextInputdatabase:

Mode

1. Press

(right softkey) >AddWord.

Save

2. Enter the word using Alphabet Mode and press

(left

softkey).

Toeditorerasethewordsyouhaveadded:

Mode

1. Press

(right softkey) >TextOptions>MyWords.

– or –

From standby mode, select

>Settings>Others>TextEntry>

MyWords.

Options

2. Highlight your desired word and press

(right softkey).

3. Select an option and press

Ⅲ

Edit to edit a word in My Words.

Ⅲ

Erase to erase a word in My Words.

CustomizingtheT9Settings

Mode

1. Press

(right softkey) >TextOptions>T9Settings.

– or –

From standby mode, select

>Settings>Others>TextEntry>

T9Settings.

2. Select an option and press

Ⅲ

NextWordPredictionto automatically display the word

that may follow the current text input.

Ⅲ

Word Completion to show the completed words that match

the keys you’ve entered without entering the whole word.

WordScanto allow T9 text input to recognize words by

searching Phone Book and messages.

Ⅲ

WordChoiceList to display word choice list.

Showafterenter to select digits number (1-3 digits) to

display the words choice list. The word choice list will

display based on the number of digits you selected.

Ⅲ

Showafterwait to select how many seconds the phone

should wait to display the word choice list.

For more information about T9 Text Input, visit the Tegic Web

site at www. T9. com.

Entering Characters Using Alphabet Mode

To enter characters using Alphabet mode, select the Alphabet

mode (see “Selecting a Character Input Mode” on page 25).

Press the corresponding key until the desired character appears.

By default, the first letter of a word is capitalized and following

letters are lowercased.

Charactersscrollinthefollowingorder:

English Sequence

Key

Upper Case

Lower Case

. , @ 1 ? ! # /

A B C 2

a b c 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W XY Z 9

d e f 3

g h i 4

j k l 5

m n o 6

p q r s 7

t u v 8

w x y z 9

Space

One-character-shifted Caps Lock Unshifted

InFrenchmode, charactersscrollinthefollowingorder:

French Sequence

Key

Upper Case

Lower Case

. , @ 1 ? ! # /

A B C À Â Ç 2

a b c à â ç 2

D E F É È Ê Ë 3

G H I Î Ï 4

J K L 5

d e f é è ê ë 3

g h i î ï 4

j k l 5

M N O Ô 6

P Q R S 7

T U V Ù Û Ü 8

W XY Z 9

m n o ô 6

p q r s 7

t u v ù û ü 8

w x y z 9

Space

One-character-shifted Caps Lock Unshifted

See pages 25, 45 for changing French entry mode.

After a character is entered, the cursor automatically advances to

the next space after two seconds or when you enter a character

not on the same key.

Setting the Default Input Mode

1. Select

>Settings>Others>TextEntry>DefaultInput.

2. Select an option and press

Ⅲ

T9 Word to select the T9 word mode for the initial entry

mode.

Ⅲ

Alphabet to select the Alphabet mode for the initial entry

mode.

RetainMode to set the retain mode on to retain the

previous entry mode.

2. Your Phone’s Settings

Sound Settings

Ringer Types

SelectingRingerTypesforIncomingCalls

Select a ringer type for incoming calls so that you can recognize

when a certain type of call is coming in:

Toselectaringertypeforincomingcalls:

1. Select

2. Select the field you want to edit (WithCallerID or NoCallerID)

and press

3. Select a ringer and press

Toselectadistinctiveringerforincomingcallswhileroaming:

1. Select > Settings > Sounds > RingerType > IncomingCalls.

>Settings>Sounds>RingerType>IncomingCalls.

2. Select Roaming > Distinctive. (Select Normal to deactivate this

feature.)

SelectingRingerTypesfor10-4Calls

1. Select

>Settings>Sounds>RingerType>10-4.

2. Select the field you want to edit (10-4Calls, 10-4Missed, or

10-4FloorTone) and press

3. Select a ringer and press

SelectingRingerTypesforVoicemailorCalendar/Alarm

1. Select >Settings>Sounds>RingerType>Voicemailor

Calendar/Alarm.

2. Press , select a ringer, and press

SelectingRingerTypesforMessaging

1. Select

2. Select the field you want to edit (Text, PicMessaging or

WebAlerts) and press

3. Press , select a ringer, and press

>Settings>Sounds>RingerType>Messaging.

Adjusting the Phone’s Volume Settings

Adjustingtheringervolume

1. Select >Settings>Sounds>Volume>Ringer.

Done

2. Select a volume level and press

(left softkey).

Tip: You can adjust the ringer volume in standby mode (or the earpiece

volume during a call) by using

AdjustingtheAlertVolume

This setting controls the alert volume for 10-4, Voicemail,

Messaging, and Calendar/Alarm. You can set the alert volume

separately from the ringer volume setting.

1. Select >Settings>Sounds>Volume>AdvancedRinger.

2. Select 10-4, Voicemail, Messaging, orCalendar/Alarm.

3. Using the navigation key, select SeparateVol.

Done

4. Select a volume level, and press

(left softkey).

AdjustingthePhone’sReceiverVolume

1. Select >Settings>Sounds>Volume>Receiver.

2. Select either Earpiece or Speaker.

Done

3. Select a volume level, and press

(left softkey).

AdjustingtheApplication, Start-up/Power-off, orKeyBeepVolume

1. Select >Settings>Sounds>Volume.

2. Select Application, Start-up/Pw-off, or KeyBeep.

Done

3. Select a volume level, and press

(left softkey).

Selecting Vibrate Pattern

With this feature, you can select vibrate pattern for incoming

calls, messages, and schedule alarms.

1. Select

>Settings>Sounds>VibratePattern.

2. Select IncomingCalls, 10-4 ,Voicemail, Messaging, or

Calendar/Alarm. The following items require an additional

step:

Ⅲ

IncomingCalls: select WithCallerID, NoCallerID, or

Roaming.

Ⅲ

10-4: select 10-4Calls or 10-4Missed.

Ⅲ

Messaging: select Text, PicMessaging or WebAlerts.

3. Select a vibrate pattern and press

Selecting a Tone Length

1. Select

>Settings>Sounds>Others>ToneLength.

2. Select Short or Long.

Setting a Start-up/Power-off Tone

1. Select

>Settings>Sounds>Others.

2. Select Start-upTone or Power-offTone.

3. Select a tone, and press

Using Voice Prompt

This feature allows you to hear voice prompts Voice-activated

dialing, when using Voice Memo, Screen Call setting, etc.

(Default Setting is Off.)

1. Select

>Settings>Sounds>Others>VoicePrompt.

2. Select On.

Tip: When ringer volume is set to Silence All or Vibrate All, voice

prompts cannot be heard.

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers when

you press the keypad. This feature is available when you are in

standby mode.

1. Select

>Settings>Sounds>Others>KeyPressEcho.

2. Select On or Off.

Note: If the Key Beep is off, you are not able to change this setting. See

“Adjusting the Application, Start-up/Power-off, or Key Beep Volume” on

page 30.

Alert Notification

Your phone comes with several different options to keep you

aware of what’s going on by sounding the alert or ringer.

Tosetthealerts:

1. Select

>Settings>Sounds>Alerts.

2. Select an option and press

Ⅲ

Service to set alert on or off for network services

parameter changes.

Ⅲ

10-4 to set an alert to notify you of 10-4 calls.

Ⅲ

10-4Calls to notify of incoming 10-4 calls.

Ⅲ

10-4Missed to notify of missed 10-4 calls.

Ⅲ

HeadsetAlert to tell if you have the floor using a

headset.

Ⅲ

FloorToneVol. to set the floor tone volume during a call.

Ⅲ

Voicemail to set an alert to notify you of voice message(s).

Select RingerLength to set the ringer length of Voicemail

notification.

Messaging to set an alert to notify you of text, picture

message or Web Alert. Select RingerLength to set the

ringer length of Messaging notification.

Ⅲ

MinuteBeep to set a minute reminder that beeps ten

seconds before the end of each minute during a call.

SignalFade to set alert to notify you when your phone

loses a signal during a call.

3. Select a setting and press

Tip: You can select Once or Repeat Alert if you select 10-4 Calls, 10-4

Missed, Voicemail or Messaging. Repeat Alert sounds an alert every two

minutes for twenty minutes. (For 10-4 calls, an alert sounds for 20

seconds continuously.)

Silence All

ᮣ

With the phone open, press and hold

down in standby

mode. (The screen will display “Silence All.”)

Ⅲ

To deactivate, with the phone open, press

repeatedly to select a volume level.

Tip: When Ringer Volume is set as Silence All, you are not able to

change the settings of Advanced Ringer, Application,

Start-up/Pw-off or Key Beep. See “Adjusting the Application, Start-

up/Power-off, or Key Beep Volume”on page 30.

You can also select Vibrate All to set your phone to vibrate only.

Display Settings

Changing the Phone’s Menu Style

Your phone allows you to choose how the main menu appears

on your display screen.

Options

(right softkey)>ChangeView.

1. Select

2. Select GridView or ListView.

Ⅲ

GridView to view each main menu item as an animated

single-screen icon. You can select a menu by pressing a

number key. Allocation of menu options corresponds to

that of number keys on the keypad.

Ⅲ

ListView to view main menu as a list. Menu option is

numbered and you can select it by pressing the

corresponding number key on the key pad.

Changing the Backlight Time Length

Tochangethebacklightsetting:

1. Select >Settings>Display>Backlight.

2. Select MainLCD or SubLCD.

3. Select AlwaysOn, DimOnly, or a preset length of time.

Note: The Always On setting returns to the previous value the next time

you turn on the phone.

TochangetheKeypadbacklightsetting:

1. Select >Settings>Display>Backlight>Key.

2. Select AlwaysOff or a preset length of time.

Note: Long backlight settings affect the phone’s talk and standby times.

Power Save Mode

This feature helps conserve your battery power by setting the

Main LCD and Sub LCD backlights to “Dim Only,” the Main LCD

sleep mode to “after 30 sec.”, and the Sub LCD sleep mode to

“after 5 sec.”

1. Select >Settings>Display>PowerSaveMode.

2. A message appears. Press

(left softkey) to continue.

3. Select On. (Select Off to deactivate this feature.)

Changing the Greeting

Todisplayorchangeyourcustomgreeting:

1. Select >Settings>Display>Greeting>Custom.

2. Enter a custom greeting using your keypad and press

(See “Entering Text” on page 25.)

Toselectthedefaultgreeting:

ᮣ

Select >Settings>Display>Greeting>Default.

Changing the Background

1. Select

>Settings>Display>Background.

2. Select a background and press

Changing the Display Screen Animation

Your new phone offers animation for what you see on the

display screen during various phone functions.

1. Select >Settings>Display>Animation.

2. Select Standby, OutgoingCalls, or ServiceSearch.

(If you select Standby, then select Set.)

3. Select an option (Preset, MyContent, -GetNew, or Off) and

press

Ⅲ

For Standby, you can select Time to set the animation

starting time.

Ⅲ

Preset is not available for Standby.

4. Select an animation display and press

Changing the Display for Incoming Calls

1. Select >Settings>Display>IncomingCalls.

2. Select an option (Preset, MyContent, -GetNew, or Off) and

press

3. Select a color or image and press

twice.

Changing the Screen Saver

Your new phone offers you the option of displaying a screen

saver on the Main LCD while in standby mode.

Tochangethescreensaver:

1. Select

2. Select an option (Preset, MyContent, GetNew, or Off) and

press

3. Select a screen saver and press

>Settings>Display>ScreenSaver.

twice.

Changing the Clock/Calendar Display for Standby Mode

Select from among a variety of items to be displayed in standby

mode.

Tosettheclock/calendardisplayforstandbymode:

1. Select

>Settings>Display>Clock/Calendar.

2. Select MainLCD or SubLCD.

3. Select a display option press

twice.

Changing the Font Size

1. Select

>Settings>Display>Others>FontSize.

2. Select View or Input.

Ⅲ

Viewto select MainLCD(and then, Messaging or Browser)

or SubLCD(and then Names/Phone#s).

Ⅲ

Input to select Phone#s, Messaging or Others.

3. Select a font size and press

Preview

Tip: You can see the preview of the display by pressing

(right

softkey). (For View menu only.)

From the preview display, you can select a font size by pressing the

navigation key right or left and press

Setting Return to Standby Mode

1. Select

>Settings>Display>Others>ReturntoIdle.

2. A message appears. Press

(left softkey) to continue.

3. Select Automatically or EndKey.

Ⅲ

Automatically to return to standby mode automatically

when no key is pressed in 30 seconds.

Ⅲ

EndKey to return to standby mode by pressing

Note: End Key setting affects the phone’s talk and standby times.

Sleep Mode

This feature helps conserve your battery power by restricting

the display.

1. Select

>Settings>Display>Others>SleepMode.

2. Select MainLCD or SubLCD.

3. Select an option and press

Ⅲ

To deactivate this feature, select Off.

Location Settings

The settings allow you to turn the Assisted GPS chipset in the

cell phone to “Allow” or “Deny.” Setting location to On lets the

network detect the cell phone’s geographic location using

Assisted GPS, making some features easier to use. Setting

location to Off disables Assisted GPS, but some features may still

detect the cell phone’s whereabouts using cell tower

technology. Assisted GPS is automatically set to On when an

emergency call is placed, then set back to Off when the call is

completed.

TosettheLocationMenutoALLOWorDENY:

1. Select

>Settings>Location>On/Off.

2. Read the disclaimer and press

(left softkey).

3. Select On or Off.

Tip: When the Location feature is on, your phone’s standby screen will

display the

displayed.

icon. When Location is turned off, the

icon will be

You can send the log received from the GPS applications to

other devices via Bluetooth or USB.

TosendtheGPSlogtootherdevices:

1. Select

>Settings>Location>NMEAOutput.

2. Select Bluetooth, USB, or Off.

Messaging Settings

Setting Message Notification

You can set your phone to display an icon and message

notification or just display an icon notification when you receive

a text message, picture message, voicemail, or Web Alert.

1. Select

>Settings>Messaging>Notification.

2. Select MsgsandIcon or IconOnly.

Tip: To access Messaging settings menu, you can also select

Messaging > Settings.

Setting Push Options

Turning this feature on allows you to connect to a Web Alerts

page automatically (if possible) when you receive a Web Alert.

See page 105 for Web Alerts.

1. Select

>Settings>Messaging>PushOptions.

2. Select Yes or No.

Editing Canned Messages

Your phone can store canned messages for use with text

messaging. You can edit your phone’s default canned messages

through the Settings menu.

Toeditacannedmessage:

1. Select

>Settings>Messaging>CannedMsgs.(The list of

canned messages is displayed.)

2. Select the message you want to edit and press

3. Use your keypad to edit the message and press

(left

softkey) or

to save your changes.

Options

Note: To reset all messages, press

(right softkey) >

Reset All Msgs > Yes after step 1 above.

Tochangethelanguageofthecannedmessages:

1. Select

>Settings>Messaging>CannedMsgs.

Options

2. Press

(right softkey)>SelectLanguage.

3. Select English or French.

Note: For information on editing text, see “Entering Text” on page 25.

Setting Your Callback Number

With this feature, you can send a callback number with your text

message.

1. Select

>Settings>Messaging>Text>SendCallback#.

2. Press , and then select an option and press

Ⅲ

None to send no callback number.

Ⅲ

MyPhone# to send your phone number.

Ⅲ

Other to send a defined number. To set a number, enter a

phone number and press

Done

3. Press

(left softkey).

Setting Your Signature

This feature allows you to send a text message with your

signature.

1. Select

>Settings>Messaging>Text>Signature.

2. Press , and then select On.

3. Select Text and enter your signature and press

(left softkey).

Save

4. Press

(left softkey) to save your signature.

Note: You can insert your signature even when your signature setting is

Mode

off. Press

your message.

(right softkey) and select Signature while composing

Setting Drafts Alert

Drafts Alert sends you a reminder when you have unsent

messages waiting in the drafts folder.

1. Select

>Settings>Messaging>Text>DraftsAlert.

2. Select On.

Airplane Mode

When your phone is in Airplane mode, it cannot send or receive

any calls (except for 911 dialing) or access online information.

Youmaystillusethephone’sotherfeatures, suchasvoicememo,

calculator, calendar, etc., while you are in Airplane mode.

1. Select

>Settings>Others>AirplaneMode.

2. Read the disclaimer and press

(left softkey).

3. Select On or Off.

Note: While in Airplane mode, your phone’s screen will display “Phone

Off.”

TTY Use

A TTY (also known as a TDD or Text Telephone) is a

telecommunications device that allows people who are deaf or

hard of hearing, or who have speech or language disabilities, to

communicate via a telephone.

Your phone is compatible with select TTY devices. Please check

with the manufacturer of your TTY device to ensure that it

supports digital wireless transmission. Your phone and TTY

device will connect via a special cable that plugs into your

phone’s headset jack. If this cable was not provided with your

TTY device, contact your TTY device manufacturer to purchase

the connector cable.

1. Select

>Settings>Others>TTY. (An informational message

will be displayed.)

2. Press or (left softkey) to continue.

3. Select Enable or Disable.

Note: When you connect TTY devices, your phone will display in

TTY mode.

If TTY mode is enabled, the audio quality of non-TTY devices

connected to the headset jack may be impaired.

IMPORTANT NOTICE: 911 Emergency Calling

It is recommended that TTY users make emergency calls by other means

including cellular and landline communications.

Phone Setup Options

My Favourites

Your phone offers you the option of assigning a shortcut to a

favourite or often-used function. Pressing the navigation key left

(by default) will launch your user-defined shortcut.

Toassignyourshortcut:

1. Press the navigation key left.

2. Select <AddFavourite>.

3. Select an option and press

Ⅲ

Contact to display stored Contacts entries.

Ⅲ

MyContent to display downloaded items stored in your

phone.

Ⅲ

WebBookmark to display your bookmarked sites.

MenuItem to assign an often-used menu item.

4. Using the navigation key or your keypad, select an item to be

assigned to the My Favourites list.

5. Press

(left softkey) to save if you select options other

Assign

than Contact.

Toedittheshortcut:

1. Press the navigation key left.

2. Highlight your desired menu and press

(right softkey).

Options

3. Select an option and press

Ⅲ

Replace to replace an existing shortcut.

Ⅲ

Remove to remove an existing shortcut.

RemoveAll to remove all the existing shortcuts.

Help to display the My Favourites list information.

Setting the Text Entry Options

1. Select

>Settings>Others>TextEntry.

2. Select an option and press

Ⅲ

Auto-Capital to set the auto-capital on or off.

Ⅲ

MyWords to add a word to or edit a word in the T9

database (see page 26).

Ⅲ

InputLanguage to select the language (English or French).

DefaultInput to select T9word, Alphabet, or RetainMode for

the initial entry mode. Set RetainMode to retain the

previous entry mode (see page 28).

Ⅲ

Auto-Space to set the auto-space on or off after T9 words

you enter.

Ⅲ

T9Settings to customize the T9 settings (see page 27).

AddWord to store words that you use frequently

(see page 26).

Ⅲ

Auto-Completeto automatically display words that may

follow the current text input.

Help to see the T9 instructions page.

Setting Any Key Answer

This feature allows you to answer incoming calls by pressing any

key (except

, softkeys, and sidekeys).

1. Select

>Settings>Others>AnyKeyAnswer.

2. Select On or Off.

Auto Answer Mode

This feature sets the phone to automatically pick up incoming

calls in speakerphone mode or hands-free mode (when

connected).

1. Select

>Settings>Others>AutoAnswer.

2. Select Hands-free or Speakerphone.

3. Select 5Seconds, 10Seconds, or Off.

Setting the Open/Close Flip Option

This feature enables you to answer an incoming call by opening

the phone or to end a call by closing the phone.

ToactivatetheOpenFlipfeature:

1. Select

>Settings>Others>Open/CloseFlip.

2. Select Open.

3. Select AnswerCall.

Ⅲ

To deactivate this feature, select NoAction.

ToactivatetheCloseFlipfeature:

1. From step 2 above, select Close. (You will see a message on

the display.)

2. Press

(left softkey) to continue.

3. Select an option and press

Ⅲ

End to end the call.

Ⅲ

Continue(Mute) to continue the call. Your voice is muted,

however you can hear the caller’s voice from the speaker.

Ⅲ

Continue(Unmute) to continue the call. You can hear the

caller’s voice and speak to the phone to answer.

Note: The Close Flip feature does not apply while you are using the

speakerphone, a headset, or a car kit.

Setting Abbreviated Dialing

ToactivatePh.BookMatchfeature:

1. Select

>Settings>Others>Abbrev. Dial.

2. Select Ph. BookMatch>Enable.

Ⅲ

To deactivate this feature, select Disable.

Tosetyourprependnumber:

1. Follow steps 1 above.

2. Select Prepend>Enable.

Ⅲ

To deactivate this feature, select Disable.

3. Select Prepend#.

4. Enter a five- or six-digit number (for example, an area code

and prefix) and press

(left softkey).

Tip: To make an Abbreviated Dial call, see “Using Abbreviated Dialing”

on page 24.

Note: This setting does not apply to 911 or Directory Assistance.

Setting Power On to Alert

Power On to Alert helps prevent unintentional or accidental

power-on of your phone’s alarm settings while your phone is

turned off. This feature applies only to Event Alerts, Call Alarm,

and Alarm Clock. (The default setting is Off.)

ToturnPowerOntoAlertonoroff:

1. Select

>Settings>Others>PowerOntoAlert.

2. Select On or Off.

Ⅲ

On to activate alarm in Airplane Mode even if the phone is

turned off.

Ⅲ

Off to deactivate all alarm settings while the phone is

turned off.

Headset Mode

This feature allows you hands-free phone use. Press the Turbo

Button (the operation button) on the headset to activate useful

functions.

Toconnecttheheadset:

ᮣ

Simply plug the headset into your phone’s headset jack.

Tosetheadsetmode:

1. Select

>Settings>Others>HeadsetMode.

2. Select TurboButton.

3. Select an option and press

Ⅲ

VoiceCallsto use the Turbo Button to activate voice dial.

Press twice to redial the last call. Press and hold to record

a voice memo.

Ⅲ

10-4to use the Turbo Button to redial the last 10-4 call.

Press and hold the Turbo Button.

Off to disable a Turbo Button setting or if your headset

does not have a Turbo Button.

Tosettheringersound:

1. Select

>Settings>Others>HeadsetMode.

2. Select RingerSound.

3. Select Normal or HeadsetOnly.

Setting Navigation Key Shortcuts

You can use the navigation keys as shortcuts to access specific

menu items directly from standby mode. With this feature, you

can reassign the default shortcuts to the menu items you choose.

Tosetthenavigationkeyshortcut:

1. Select

>Settings>Others>NavigationKeys.

2. Select the navigation key you wish to reassign and press

3. Using the navigation key or your keypad, select a function.

4. Press

(left softkey) to save.

Assign

Setting Side Key Guard

This feature enables you to lock the side keys while your phone

is closed.

1. Select

>Settings>Others>SideKeyGuard.

2. Select On or Off.

Note: This feature does not apply when the phone is open.

Tip: You can deactivate this feature temporarily by pressing and holding

while the phone is closed. Note that the Side Key Guard will

reactivate if the phone is left unoperated for approximately 30 seconds

or if the phone is opened and re-closed.

Changing the Menu Language

1. Select

>Settings>Others>Language.

2. Select English or Français.

3. Security

Accessing the Security Menu

You must enter your lock code to view the Security menu.

1. Select

>Settings>Security.

2. Enter your lock code.

Tip: If you can’t recall your lock code, try using the last four digits of your

phone number or 0000.

Using Your Phone’s Lock Feature

Locking Your Phone

LockPhone automatically locks the keys. If you set Lock Phone,

you must enter the lock code beforehand to make a call. In this

way you can prevent other people from using your phone.

However, even when your phone is locked, you can make calls

to 911, Customer Service, and to special numbers without

entering the lock code.

1. From the Security Menu display (See “Accessing the Security

Menu” above), select LockPhone.

2. Select LockNow or OnPower-up.

Ⅲ

LockNowto lock your phone now.

Ⅲ

OnPower-upto lock your phone the next time it is

turned on.

3. Select either FullLock or Exp. IncomingCalls.

Ⅲ

FullLock to restrict both outgoing and incoming calls.

Ⅲ

Exp. IncomingCalls to restrict outgoing calls while

allowing incoming calls.

Unlocking Your Phone

1. Press

(left softkey).

Unlock

2. Enter your lock code.

Changing the Lock Code

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Others>ChangeLock.

2. Enter and re-enter a new lock code.

Calling in Lock Mode

You can place calls to 911, Customer Service, and to your special

numbers even if your phone is locked. (See “Locking Your

Phone” on page 50.)

ᮣ

To call an emergency number, special number, or Customer

Service, enter the phone number and press

. (For

information on special numbers, see “Using Special

Numbers” on page 52.)

Lock Services

With this feature, you can choose to restrict access to the

Internet, incoming and outgoing voice calls, 10-4 calls or

Security settings.

1. From the Security Menu display, select Others > LockServices.

2. Select VoiceCalls, Internet,or 10-4.

3. Select Locked.

Ⅲ

To deactivate this feature, select Unlocked.

Note: If Voice Calls is locked, making and receiving calls are not

available. (You can only make a call to 911.)

Restricting Calls

You can restrict phone numbers your phone dials or receives.

(LimitUse setting does not apply to 911 or Customer Service.)

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Others>LimitUse.

2. Select OutgoingCalls or IncomingCalls.

3. Select an option and press

Ⅲ

AllowAll to make or receive all calls.

Ⅲ

PhoneBookOnly to make or receive calls to or from

Contacts entries, voicemail, or special numbers only.

Special#sOnly to make or receive calls to or from three

special numbers only. (You must register the numbers

beforehand. See “Using Special Numbers” below.)

Note: Restricted incoming calls are forwarded to voicemail.

Using Special Numbers

You can save three special numbers on your phone. You can

make or receive calls to or from special numbers even when

your phone is in LockPhone status.

Toaddoreditaspecialnumber:

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Others>Special#s.

2. Select a field to enter or edit the number and press

3. Enter or edit the number and press

Note: There are no speed dial options associated with special numbers.

You cannot make calls to or receive calls from special numbers if

Voice Calls is set to Locked in Lock Services.

Erasing Phone Content

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Erase/Reset.

2. Select an option and press

Ⅲ

ErasePh. Book to erase all of your Contacts entries.

Ⅲ

EraseMyContent to erase all items you have downloaded

to your phone.

EraseVoiceData to erase all voice/call memos you have

recorded.

EraseVoiceTag to erase all voice dial tags you have

recorded.

EraseMessages to erase all text messages (including

locked ones) in the Inbox, Sent Mail, Pending, Drafts

folders, and your defined folders; all Recent Lists; and all

user-created canned messages.

Ⅲ

EraseCal. Eventsto erase all scheduled events (including

secret ones).

3. Press

(left softkey) to continue.

4. If you are certain you would like to reset, select Yes.

Resetting the Browser

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Erase/Reset>ResetBrowser.

2. Press

(left softkey) to continue.

3. If you are certain you would like to reset, select Yes.

Resetting Favourites

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Erase/Reset>ResetFavourites.

2. Press

(left softkey) to continue.

3. If you are certain you would like to reset, select Yes.

Restoring Default Settings

DefaultSettings restores all the factory defaults, including the

ringer types and display settings. The Contacts, Call History,

Calendar, and Messaging are not affected.

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Erase/Reset>DefaultSettings.

2. Press

(left softkey) to continue.

3. If you are certain you would like to reset, select Yes.

Resetting Your Phone

Resetting the phone resets all settings and erases all data on your

phone.

1. From the Security Menu display (See “Accessing the Security

Menu” on page 50), select Erase/Reset>ResetPhone.

2. Read a disclaimer and press

(left softkey) to continue.

3. If you’re sure you want to reset your phone, select Yes.

4. Roaming

Understanding Roaming

Recognizing Icons on the Display Screen

Your phone’s display screen always lets you know when you’re

off the home network. Any time you are roaming, the phone

displays the roaming icon (

Roaming on Other Networks

When you’re roaming, your call quality and security will be

similar to the quality you receive when making calls on the

home network. You may not be able to access certain features.

Note: If you’re on a call when you leave the home network and enter an

area where roaming is available, your call is dropped. If your call is

dropped in an area where you think service is available, turn your phone

off and on again to reconnect to the home network.

Setting Your Phone’s Roam Mode

Your phone allows you to control your ability to roam. By using

the Roaming menu option, you can determine which signals your

phone accepts.

Tochoosefromtwodifferentsettingsonyourdualband/dual

modephonetocontrolyourroamingexperience:

1. Select

>Settings>Others>Roaming.

2. Select an option and press

Ⅲ

Automatic to seek Service. When Service is unavailable,

the phone searches for an alternate system.

Ⅲ

HomeOnly to access the home network only and prevents

roaming on other networks.

5. Menu Navigation

Viewing the Menus

Menu Diagram

Menus let you check or change your phone settings. The

following outline shows your phone’s menu structure.

1. Missed Alerts

6. Web

7. Calendar

8. Tools

2. Call History

1. Outgoing

1. Voice Memo

2. Bluetooth

3. Alarm Clock

4. Stop Watch

5. Countdown

6. World Clock

7. Calculator

9. Settings

1. Sounds

2. Display

3. Internet

4. 10-4

5. Location

6. Bluetooth

7. Messaging

8. Security

9. Others

2. Incoming

3. Missed

4. Recent Calls

5. Erase History

3. Contacts

1. Find/Add Entry

2. Group

3. Speed Dial #s

4. My Name Card

5. Services

4. Messaging

1. Send Message

2. Text

3. Picture Msg

4. Web Alerts

5. Voicemail

6. Settings

0. Phone Info

5. My Content

Application Mgr.

Games

Ringers

Screen Savers

Applications

Dynamic 1-11 (If applicable)

Others (If applicable)

IN USE MENU

Press

(right softkey) to display the following options:

Options

1. Flash

2. Mute/Unmute

3. Speaker On/Speaker Off

4. Three-Way Call

5. Missed Alerts

6. Call History

7. Contacts

8. Messaging

9. Calendar

10. Tools

11. Settings

6. Managing Call History

Viewing History

You’ll find the Call History feature very helpful. It is a list of the

phone numbers (or Contacts entries) for calls you placed,

accepted, or missed. Call History makes redialing a number fast

and easy. It is continually updated as new numbers are added to

the top of the list and the oldest entries are removed from the

bottom of the list.

1. Select

2. Select Outgoing, Incoming, Missed, or RecentCalls.

3. Select the entry you wish to view and press

>CallHistory.

Note: Call History records only calls that occur while the phone is turned

on. If a call is received while your phone is turned off, it will not be

included in the phone’s Incoming or Missed call logs.

Tip: The icons next to the name in the Recent Calls list represent the

status of the call history:

for outgoing calls,

for Incoming calls, and

for Missed calls.

You can view Recent Calls with the phone closed by pressing

Recent Calls shows up to the 60 most recent calls for both

conventional and 10-4 calls.

Call History Options

For additional information and options on a particular call,

highlight a Call History entry and press

(right softkey).

Options

ⅷ

Call to dial the phone number.

ⅷ

Call:SpeakerOn to dial the phone number in speakerphone

mode.

ⅷ

SendMessage to send a text message. See page 105 for details.

SavePhone# to save the phone number (if applicable).

Ⅲ

GotoPhoneBook appears when the caller’s phone

number is already saved in your Contacts. (See “Saving a

Phone Number From Call History” on the page 60.)

ⅷ

Renameto change the current entry’s name to Caller ID name

(if applicable).

ⅷ

Prepend to add numbers to the beginning of the phone

number. (See “Prepending a Phone Number From Call

History” on page 60.)

CopytoPersonal to copy the phone number to the 10-4

Personal List (appears only when 10-4 mode is set to Enable

and the number does not match any stored entry in your

Personal List).

ⅷ

Erase to erase the entry.

Tip: You can also view the next or previous Call History entry by pressing

the navigation key right or left.

Making a Call From Call History

ToplaceacallfromCallHistory:

1. Select

>CallHistory.

2. Select Outgoing, Incoming, Missed, or RecentCalls.

3. Select the Call History entry you want to call.

4. Press

– or –

Press

(right softkey), > Call or Call:SpeakerOn.

Options

ToplaceacallusingtheCallListkey:

1. With the phone closed, press

. Recent Calls list appears

on the sub LCD.

2. Use

to select a Call History entry.

3. Press and hold

Note: You cannot make calls from Call History to entries identified as

No ID or Restricted.

Saving a Phone Number From Call History

1. Select

>CallHistory.

2. Select Outgoing, Incoming, Missed, or RecentCalls.

3. Highlight the call history entry you want to save and press

(right softkey) >SavePhone#.

Options

4. Select NewName or FromPh. Book to enter a name.

Ⅲ

NewName to create a new Contacts entry for the

number.

Ⅲ

FromPh. Book to save the number to an existing entry.

(This step is not necessary on the very first entry in your

Contacts.)

5. Select a label and press

6. Enter a name for the new entry using the keypad and press

– or –

Search for an existing contact name and press

new number.

to save the

7. Press

(left softkey).

Save

Note: You cannot save phone numbers from calls identified as No ID or

Restricted.

Prepending a Phone Number From Call History

If you need to make a call from Call History and you happen to

be outside your local area code, you can add the appropriate

prepending by following these steps:

1. Highlight your desired Call History entry and press

Options

(right softkey).

2. Select Prepend.

3. Enter the digits you want to add to the number.

4. Press

to place a call.

Erasing Call History

1. Select

>CallHistory>EraseHistory.

2. Select Outgoing, Incoming, Missed, RecentCalls, or All.

3. Select Yes.

7. Using Contacts

Displaying the Contacts List

ᮣ

Select

>Contacts>Find/AddEntry.

Adding a New Contacts Entry

Your phone can store up to 500 Contacts entries. Contacts can

store up to a total of 700 phone numbers and each entry’s name

can contain 32 characters.

1. From the Contacts list display, select <AddContact>.

2. Enter a name for the entry and press the navigation key down.

Shortcut: Enter the phone number in standby mode and press

Proceed with steps 2-5 in “Saving a Phone Number”on page 21.

3. Enter the phone number and press

4. Select a label for the entry (Mobile, Home, Work, Pager, Fax, or

Other) and press

5. Press (left softkey).

Save

Assigning a Group Entry

Toaddagroupname:

1. Select

>Contacts>Group.

2. Highlight an unnamed group and press

(right softkey)

Options

> Edit.

3. Enter the group name and press

4. Scroll down to the Ringer or PictureID to assign a ringer type

or image for a group entry.

5. Press

(left softkey) to save.

Save

ToassignaContactsentrytoagroup:

1. From the Contacts list display, select your desired Contacts

entry and press

2. Scroll down to the box next to the

icon and press

twice.

(left

3. Select a group from the Group list and press

Done

softkey).

4. Press

(left softkey) to save.

Save

Toeraseagroupmember:

1. Select >Contacts>Group.

2. Select the group entry you want to erase members from and

press

3. Select the member you want to erase and press

(right

Options

softkey) >Erase>This or All.

4. Select Yes.

Finding Contacts Entries

There are several ways to display your Contacts entries:

by name, by speed dial number, and by voice dial tags. Follow

the steps outlined in the sections below to display entries from

the Contacts menu.

Finding Names

TofindContactsentriesbyname:

1. From the Contacts list display, scroll through all the entries

using your navigation key.

– or –

Enter the first letter or part of the person’s name. (The more

letters you enter, the more your search narrows.)

2. To display the entry’s details, select your desired entry and

press

TofindContactsentriesbyvoicedialtag:

Note: To use this feature, you must have stored entries for voice dialing.

See “Using Voice-Activated Dialing” on page 81.

1. Press and hold

on the right side of the phone.

2. Say the voice dial tag of the Contacts entry you would like to

find. If the phone partly recognizes the name, a list of up to

three most likely match names is displayed. You will hear the

voice prompt “Did you say…” followed by the matched name.

Note: Your phone will automatically place a call if the voice dial tag is

completely recognized.

3. Say “Yes” if you confirm the name, or “No” to change the

selection.

Finding Speed Dial Numbers

ᮣ

Select

>Contacts>SpeedDial#s.

See “Using Speed Dialing” on page 23 for how to use speed

dialing.

Finding Group Entries

Tofindentriesdesignatedaspartofagroup:

1. Select

>Contacts>Group.

2. Scroll through the group entries using your navigation key. To

display Contacts entries belonging to a group, select the

group and press

3. To make the call, highlight your desired number and press

Contacts Entry Options

To access a Contacts entry’s options, select an entry and press

. Then highlight a phone number and press

(right

Options

softkey).

ⅷ

Edit to edit the selected entry.

Call to dial the selected phone number.

Call:SpeakerOn to dial the selected phone number in

speakerphone mode.

ⅷ

SendMessage to send a text message. (See page 105 for

details.)

ⅷ

CallAlarm to set a call alarm to the entry (see page 71).

SetSpeedDial to assign the speed dial numbers to the entry

(see page 66).

ⅷ

SetVoiceTag to set a voice dial tag for the entry (see page 81).

Prepend to alter a phone number by adding numbers to the

beginning of the entry. (See “Prepending a Phone Number

From Call History” on page 60.)

ⅷ

CopytoPersonal to copy the phone number to your 10-4

Personal List (only appears when 10-4 mode is set to Enable

and the number does not match any stored entry in your

Personal List).

ⅷ

SendContact to send the Contacts entry to another Bluetooth

device (see page 115).

Printto print the Contacts entry’s data.

Tip: You can view the next or previous entry by pressing the navigation

key right or left.

Adding a Phone Number to a Contacts Entry

1. From the Contacts list display, select the Contacts entry you

wish to add a phone number to and press

2. Press (right softkey) >Edit; or

(right softkey) if a

Edit

Options

URL or email address is selected.

3. Select the box next to the

icon and press

4. Enter the number and press

5. Select a label for the number and press

6. Press (left softkey).

Save

Editing a Contacts Entry’s Phone Number

1. From the Contacts list display, select the Contacts entry you

wish to edit the phone number to and press

2. Select the number you wish to edit and press

(right

Options

softkey) >Edit.

3. Press

again to edit the number.

4. Press

to clear one digit at a time, or press and hold

erase the entire number.

5. Re-enter or edit the number and press

6. Select a label for the number and press

7. Press

(left softkey).

Save

Erasing a Contacts Entry From the List

1. From the Contacts list display, highlight the entry you wish to

delete and press (right softkey).

Options

2. Select EraseContact>Yes.

Assigning Speed Dial Numbers

With this feature you can dial Contacts Directory entries with one

key press for locations 2-9. (For details on how to make calls

using speed dial numbers, see “Using Speed Dialing” on

page 23.)

Toassignaspeeddialnumber:

1. Select

2. Select an available speed dial location and press

3. Select an entry from the list and press

4. Select the phone number you want to set as a speed dial

>Contacts>SpeedDial#s.

number and press

– or –

1. From the Contacts list display, select your desired entry and

press

2. Select the phone number you want to set as a speed dial

number and press (right softkey) >SetSpeedDial.

Options

3. Select an available speed dial location and press

Note: When you select the speed dial location with a phone number

assigned, you’ll be asked whether you want to overwrite the assigned

number. Select Yes to overwrite or No to cancel. To delete the previous

speed dial assignment, select Reset.

Editing a Contacts Entry

1. From the Contacts list display, select the entry you wish to

edit and press

2. Press

(right softkey) >Edit; or

(right softkey) if a

Options

Edit

URL or email address is selected.

3. Select the field you want to edit and press

4. Add or edit the information and press

5. Press (left softkey).

Save

Assigning an Image to a Contacts Entry

You can assign an image to a Contacts entry. The image is

displayed when the entry calls you.

Toassignanimageforanentry:

1. From the Contacts list display, select the entry for which you

want to assign the image and press

2. Press the navigation key up to highlight the icon and press

twice.

3. Select an image and press

4. Press (left softkey).

to assign the image to the entry.

Save

Selecting a Ringer Type for an Entry

You can assign a ringer type to a Contacts entry so you can

identify the caller by the ringer type.

Toselectaringertypeforanentry:

1. From the Contacts list display, select the entry for which you

want to assign a ringer and press

2. Press (right softkey) >Edit; or

(right softkey) if a

Edit

Options

URL or email address is selected.

3. Scroll down to the box next to the

icon and press

4. Select your desired ringer type and press . (When you

highlight a ringer type, a sample ringer will sound.)

5. Press

(left softkey).

Save

Secret Contacts Entries

You can hide an entry’s phone number(s) by making them

secret, which requires your lock code to edit the entry. The

entry name is still displayed, but the entry’s phone numbers are

replaced by “<Secret>”.

1. From the Contacts list display, select the Contacts entry you

want to tag as secret and press

(right softkey).

Options

2. Select SetSecret.

3. Enter the 4-digit lock code.

4. Select On or Off.

Tip: If you can’t recall your lock code, try using the last four digits of your

phone number, or 0000.

Dialing Services

Your Contacts is preprogrammed with contact numbers for

various services.

1. Select

2. Select CustomerService or DirAssistance.

3. Press or

>Contacts>Services.

8. Personal Organizer

Using Your Phone’s Calendar

Use the Calendar to remind you of events or important calls you

need to make. You can schedule up to 200 events, 15 Call Alarms

and 40 To Do Items.

Displaying Your Calendar

ᮣ

Select

>Calendar.

Tip: To change the calendar display views, press the left softkey

(Monthly or Weekly). In the weekly view, you can easily add or edit your

own schedule.

Changing the Calendar Settings

This setting allows you to change the default settings for your

phone’s calendar. You can customize the calendar display

according to your needs.

Tochangethecalendarsettings:

1. From the calendar display, press

(right softkey) >

Options

Settings.

2. Select one of the following options and press

Ⅲ

Holidayto add or reset a holiday on the calendar (SetDate,

SetWeekly, ResetDate, ResetWeekly, or ResetAll).

Ⅲ

Displayto change the display settings of the calendar

(CalendarView, MonthlyView, or TimeStartsat).

Alarmto change the alarm settings of the calendar

(RingerLength, SnoozeInterval, or SnoozeTimes).

3. Change the settings and press

Adding a Schedule to the Calendar

1. From the Calendar display, highlight the day to which you

want to add a schedule.

2. Press

(right softkey) >AddSchedule.

Options

3. Enter the description and press

Tip: While entering the description you can also press

(right

Mode

softkey) to select a description from “From To Do List” or “Fr. Schedule

List”. (You need to store entries in those lists in advance. See “Adding To

Do Items” on page 72 for details.)

4. Enter other fields if necessary:

Ⅲ

Descriptionto change the description for the schedule.

Ⅲ

Categoryto select a category (Appointment, Business,

Meeting, Personal, Vacation, Travel, or Miscellaneous).

Ⅲ

Priorityto select a priority (None, High, or Low).

Ⅲ

Startto set a start time for the schedule.

Ⅲ

Endto set an end time for the schedule.

Ⅲ

Location to edit the location of your schedule (up to 64

characters).

Ⅲ

Alarm to select the ringer for the alarm.

Ⅲ

AlarmTime to edit the alarm time (number of hours or

minutes before the event starts). Default alarm time is 10

minutes.

Ⅲ

Repeat to set the schedule’s repeating status.

5. Press

(left softkey) to save the schedule.

Save

Tip: Press the navigation key up or down to scroll by week through the

calendar, and to scroll by month.

In the monthly view, days with events scheduled are indicated by a

small ᮣ just to the left of the date. In the weekly view, times for

which you have scheduled events are displayed as colored blocks.

Adding a Call Alarm to the Calendar

1. From the Calendar display, highlight the day to which you

want to add a call alarm and press

(right softkey).

Options

2. Press the navigation key left or right to selectAddCallAlarm.

3. Enter the phone number directly or press

(right

Options

softkey) for the following options:

Ⅲ

FromPh. Book to select the number from your Contacts.

Ⅲ

Voicemail to select the number for voicemail access.

4. Select the following items you want to edit and press

Ⅲ

Categoryto select a category for the call alarm

(Appointment, Business, Meeting, Personal, Vacation,

Travel, or Miscellaneous).

Ⅲ

Time/Date to edit the start time/date.

Alarm to select the ringer alarm.

Repeat to set the Call Alarm’s repeating status.

5. Press

(left softkey).

Save

Tip: You can also add a call alarm from the Contacts menu.

(See “Contacts Entry Options” on page 63.)

Torespondtoacallalarm:

ᮣ

Press any key to stop the alarm. (The alarm will stop and then

sound again after the selected snooze interval.)

Ⅲ

Press and hold

to cancel snoozing.

Ⅲ

Press

(right softkey) to dismiss the event.

Dismiss

Tip: To change the alert settings, from the calendar view, press

Options

(right softkey) > Settings > Alarm to set the ringer length and snooze

options.

Tocallthephonenumberatthetimeofacallalarmnotification:

ᮣ

Press

to dial the phone number (if applicable).

ᮣ

to make a 10-4 call (if applicable).

Adding To Do Items

Your phone can store and manage 40 To Do items.

1. From the Calendar display, press

(right softkey).

Options

2. Press the navigation key left or right to select AddToDo.

3. Enter the description and press

Tip: While entering the description you can also press

(right

Mode

softkey) to select a description from “From To Do List” or “Fr. Schedule

List”. (You need to store entries in those lists in advance. See “Adding a

Schedule to the Calendar” on page 70 for details.)

4. Select an option you want to edit and press

Ⅲ

Categoryto select an event category (Appointment,

Business, Meeting, Personal, Vacation, Travel, or

Miscellaneous).

Ⅲ

Priorityto select an event priority (None, High, or Low).

DueTime/Dateto schedule a due time and date.

Statusto select a status for the To Do items (NeedsAction

or Completed).

5. Press

(left softkey).

Save

Adding a To Do List Item to the Calendar

1. From the Calendar display, press

(right softkey).

Options

2. Highlight ScheduleList and press the navigation key left or

right and select ToDoList.

3. Select the item you want to add to the schedule, and press

(right softkey) >AddtoSchedule.

Options

4. Modify the description field (if desired), and set the other

fields using your keypad and press . (See “Adding a

Schedule to the Calendar” on page 70.)

5. Press

(left softkey).

Save

Event Alerts

There are several ways your phone alerts you of scheduled

events.

Note: Events include Schedule (see page 70), Call Alarm (see page 71)

and To Do items (see page 72).

ⅷ

By playing the assigned ringer type.

ⅷ

By blinking the LED.

ⅷ

By lighting the LCD backlight (depending on the backlight

setting).

Event Alert Menu

When you have an event alarm scheduled, your phone alerts you

and displays the event summary.

ᮣ

Press any key to stop the alarm. (The alarm will stop and then

sound again after the selected snooze interval.)

Ⅲ

Press and hold

to cancel snoozing.

Ⅲ

Press

(right softkey) to dismiss the event.

Dismiss

Note: The alarm will not sound when the phone is powered off. However,

depending on the Power On to Alert setting, the alarm setting will

be active even if the phone is turned off. (See “Setting Power On

to Alert” on page 47.)

To change the alert settings, from the calendar view, press

(right softkey) > Settings > Alarm to set the ringer length

Options

and snooze options.

Viewing Day’s Events

1. From the Calendar display, highlight the day for which you

would like to view events and press . (If you have events

scheduled for the selected day, they will be listed in

chronological order.)

Tip: If you are in the weekly view, select a block that is colored and

press

to display the event’s details.

2. To display the details of an event listed in the schedule, select

the event and press

Editing an Event on the Calendar

To edit a scheduled event on the calendar, select the Weekly view.

Tomoveanevent:

1. Highlight the event you would like to move and press

Options

(right softkey) >Move.

2. Use the navigation key to move the event to the date and time

you would like to and press

Tocopyanevent:

1. Highlight the event you would like to copy and press

Options

(right softkey).

2. Highlight Move and press the navigation key left or right to

select Copy/Paste.

3. Use the navigation key to select the date and time you would

like to paste the copied event and press

(right softkey)

Paste

Tochangethestartorendtimeofanevent:

1. Highlight the event for which you would like to change the

start or end time and press (right softkey).

Options

2. Highlight Move and press the navigation key left or right to

select Resize.

3. Use the navigation key up and down to change the start time.

To change the end time, press

(right softkey), then use

Lower

the navigation key.

4. Press

Note: Use the right softkey (Upper or Lower) to toggle between:

• Upper to change the start time.

• Lower to change the end time.

Toeraseanevent:

1. Highlight the event you would like to erase and press

Options

(right softkey).

2. Highlight Move and press the navigation key left or right to

selectErase.

3. Press >Yes.

Event List Options

While you are displaying the day’s events list, press

Options

(right softkey) to access the following options:

ⅷ

Add Schedule to add a schedule to the calendar.

ⅷ

Add Call Alarm to add a call alarm to the calendar.

Add To Do to add a To Do item to the calendar.

Schedule List to display the Schedule List on the calendar.

Call Alarm List to display the Call Alarm List on the calendar.

To Do List to display the To Do List on the calendar.

Edit to edit the event.

ⅷ

Set Cal. Secret to make an event secret.

Send Event to send the event via Bluetooth.

Erase to erase the event.

Go to Date to jump to another date on the calendar.

View Memory to view the memory status for events saved in

the phone.

ⅷ

Erase Memory to erase memory for events saved in the

phone.

Print to print the calendar events.

Erasing Events

Toeraseaday’sscheduledevents:

1. From the monthly calendar display, select the day for which

you would like to erase events and press

2. Highlight one of the events and press

(right softkey)

Options

>Erase.

3. Select an option and press

Ⅲ

This to erase a single event.

Ⅲ

Select to erase selected events at one time.

AllonThisList to erase all events on the list.

Completedto erase completed events.

(Above options may not be displayed if you have only one

event scheduled.)

4. Select Yes to erase the event(s).

Tip: To erase completed events, from the monthly view, press

Options

(right softkey), and then select To Do List and follow steps 2 - 4 above.

Note: The Erase function will not delete events that you have designated

as “secret.” (See “Event List Options” on page 75.)

Toeraseeventsscheduledbeforeaspecifictimeanddate:

ᮣ

From the calendar display, press

(right softkey)>

Options

EraseMemory>EraseOld>Yes.

Toeraseallscheduledevents:

1. From the calendar display, press

(right softkey) >

Options

EraseMemory>EraseAll>Yes. (An alert will be displayed

asking you to confirm the deletion.)

2. Press

(left softkey) to erase all events.

Yes

Note: Scheduled events include Schedule (see page 70), Call Alarm (see

page 71), and To Do items (see page 72).

Going to a Specified Date

1. From the Calendar display, press

(right softkey) >

Options

GoToDate.

2. Enter the date by using the navigation key and/or the keypad

and press or (left softkey).

Using Your Phone’s Tools

Using the Alarm Clock

Tosetthealarmclock:

1. Select

>Tools>AlarmClock.

Note: To set the alarm clock in a no-service area, press

in the “Set Current Time/Date” screen.

(left softkey)

2. Select a number and press

3. Select the items you want to edit and press

Ⅲ

Description to enter a description of the alarm.

Ⅲ

Time to enter the alarm time. Enter the desired alarm time

and press

Ⅲ

Repeat to select the alarm frequency.

Alarm to set the alarm on or off.

4. Press

(left softkey) to save the alarm settings.

Save

Tip: Press the left softkey (On or Off) to toggle the alarm on and off.

To change the alarm settings, select

the ringer length and snooze options.

(right softkey) to set

Settings

Note: Alarm will not sound when the phone is powered off. However,

depending on the Power On to Alert setting, the alarm setting will be

active even if the phone is turned off. (See “Setting Power On to Alert”

on page 47.)

Tostopthealarm:

ᮣ

Press any key to stop the alarm. (The alarm will stop and then

sound again after the selected snooze interval.)

ᮣ

Press and hold the

to cancel snoozing.

ᮣ

Press

(right softkey) to dismiss the alarm.

Dismiss

Using the Stop Watch

Tostartthestopwatch:

ᮣ

Select

>Tools>StopWatch.

Ⅲ

Press

(left softkey) to start the stop watch.

(left softkey) to stop the stop watch.

Start

Ⅲ

Press

Stop

(left softkey) to start the stop watch again.

Resume

Torecordalaptimewhilethestopwatchisrunning:

Ⅲ

Press

(right softkey) to record time of first lap.

Lap

Ⅲ

Press

(right softkey) again to record next lap. (Up to

Lap

5 lap times can be displayed. If you continue recording,

lap times will be deleted from the oldest.)

Todisplaythestopwatchoptions:

1. From the stop watch display, press

(right softkey).

Options

2. Select an option and press

Ⅲ

GotoLapList to display a saved Lap List. Press

(left

Detail

softkey) to display the lap list details.

Ⅲ

SavetoLapList to save the recorded lap times. (Available

when you stop the lap in stop watch operation.)

Reset to reset the time to zero and clear any recorded lap

times.

Using the Countdown Timer

This feature allows you to use the countdown timer with alarm

capabilities. You can set up to 5 timers.

1. Select

>Tools>Countdown.

2. Select a number and press

3. Select the items you want to edit and press

Ⅲ

Description to enter a description of the countdown.

Ⅲ

Time to enter the countdown time. Enter the desired time

and press

Alarm to set the countdown alarm on or off.

4. Press

(left softkey) to save the countdown settings.

Save

5. Press

(right softkey) to set the RingerLength,

Settings

SnoozeInterval, or SnoozeTimes.

6. Press (left softkey) to save.

Done

Tip: Press the left softkey (On or Off) to toggle the countdown alarm on

and off.

This feature is not available while your phone is turned off.

Using the World Clock

1. Select

>Tools>WorldClock.

2. Press the navigation key right or left for changing city or

country.

Summer

Standard

(right softkey) for changing

Tip: Press

(left softkey) or

between summer and standard time, if applicable. The

while summer time is displayed.

icon is shown

Using the Calculator

1. Select

>Tools>Calculator.

2. Enter numbers using your keypad. Press the left softkey to

insert a decimal point.

3. Press the appropriate navigation key for an arithmetic option.

(Up for addition, Down for subtraction, Left for multiplication,

Right for division.)

4. Enter numbers and press

for the result.

(right softkey).

Ⅲ

To clear the numbers, press

CLR

Personal Information Management

Displaying Phone Information

ᮣ

Select

>Settings>PhoneInfo>MyPhone#.

Finding Icon Definition

1. Select

>Settings>PhoneInfo> IconGlossary.

2. Select the item for which you want to see the explanation and

press

Displaying the Version Information

ᮣ

Select

>Settings>PhoneInfo>Version.

Displaying Advanced Information

ᮣ

Select

>Settings>PhoneInfo>Advanced.

9. Voice Services

Using Voice-Activated Dialing

You can use a voice dial tag to automatically dial a phone

number in your Contacts. Your phone can store up to 30 voice

dial tags.

Note: Please set the Voice Prompt feature (see page 31) to On before

using the Voice-Activated Dialing so that you can hear the voice

instruction from the phone. The default setting is Off.

Making a Call Using Voice-Activated Dialing

Withthephoneopen:

1. Press and hold

, or

2. Follow the voice prompts and recite the entry’s voice dial tag

into your phone’s microphone.

Withthephoneclosed:

1. Press and hold

2. Follow the system prompts and recite the entry’s voice dial

tag into your phone’s microphone.

Note: To use this feature, you must have stored entries for voice dialing

(see “Programming Voice Dial Tag to Your Phone” below).

Programming Voice Dial Tag to Your Phone

1. From the Contacts list display, select a Contacts entry to

which you want to add a voice dial tag and press

2. Press (right softkey) >SetVoiceTag>Add.

Options

3. The phone will prompt you to say the name you want to

program. Wait for the beep and then say the name.

4 Respond to the prompt by repeating the name after the beep.

(The display shows “Voice Tag Recorded”.)

If you set a voice dial tag, the icon is shown next to the phone

number on the Contacts list.

Note: Record voice dial tags in a quiet environment and without the aid

of an accessory.

Voice Dial Tag Options

1. From the Contacts list display, select a Contacts entry for

which you would like to review the voice dial tag and press

2. Press

(right softkey)>SetVoiceTag.

Options

3. Select an option and press

Ⅲ

Play to play the selected voice dial tag.

Ⅲ

Play:Speaker to play the tag in speakerphone mode.

Change to change the recorded voice dial tag.

Erase to erase the selected voice dial tag.

Erasing All Voice Dial Tags

Toeraseallvoicedialtags:

1. Select

>Settings>Security, and then enter your lock code.

(The Security menu is displayed.)

2. Select Erase/Reset>EraseVoiceTag.

3. Press (left softkey) > Yes.

Managing Voice/Call Memos

You can use your phone’s voice services to record meetings or

lectures, or brief memos to remind you of important events,

phone numbers, or grocery list items.

Recording Voice Memos

Torecordavoicememo:

Memo

1. Press

– or –

(right softkey) >Record.

Select

>Tools>VoiceMemo > Record.

2. Start recording after the beep.

Toendtherecordingofyourmemo:

ᮣ

Press

, or

Note: Your phone can store up to 999 voice memos. The total recording

time depends on the available memory space on your phone.

Recording Call Memos

Options

1. During a call, press

(right softkey) >Tools>

CallMemoRec.

2. Start recording after the beep.

3. To finish recording, press

Ⅲ

Recording also stops when the call is disconnected.

Note: Only the other party’s voice is recorded during this process.

Reviewing Voice/Call Memos

Memo

1. Press

(right softkey) >List.

2. Select a memo from the list and press

Ⅲ

Press

(right softkey)>Play>All to play all voice

Options

memos continuously.

Ⅲ

Press

(right softkey)>Play>Multiple, and select

Options

your desired memos, and press

(left softkey).

Play

Ⅲ

Press

(left softkey) to change the playing speed.

Speed

Pause

Ⅲ

Press

(right softkey) to pause. To restart, press

(right softkey).

Play

To play the newer/older memo, press the navigation

key left or right.

3. Press

to stop playing.

Tip: To set the speakerphone mode on or off, press

(right

Options

softkey) > Speaker On/Off during step 2 above.

Erasing Voice/Call Memos

Toeraseanindividualmemo:

Memo

1. Press

(right softkey) >List.

2. Highlight the memo you want to erase and press

Options

(right softkey)>Erase>This>Yes.

Toeraseallmemos:

Memo

1. Press

(right softkey) >List.

(right softkey)>Erase>All>Yes to erase all voice

2. Press

Options

memos saved in the phone.

Toerasemultiplememos:

Memo

1. Press

(right softkey) >List.

2. Press

(right softkey)>Erase>Multiple.

Options

3. Select the memos you would like to erase and press

(left

Erase

softkey)>Yes.

Tip: If you select All during step 2 above, you can erase all voice

recordings (voice memos and call memos) saved in the phone.

Voice Memo Options

There are several user options available for managing voice/call

memos.

Todisplaythevoicememooptions:

Memo

1. Press

(right softkey) >List.

2. Highlight a voice memo and press

(right softkey).

Options

3. Select an option and press

Ⅲ

Play to play a selected voice memo or all voice memos.

Ⅲ

This to play the selected memo.

Ⅲ

Multiple to play selected memos.

Ⅲ

All to play all memos.

Ⅲ

SpeakerOn or SpeakerOff to activate or deactivate the

speakerphone mode.

Ⅲ

EditTitle to edit the title of your voice memos.

Properties to show the properties of your voice memos.

TypeFilter to filter your voice memos.

Sortby to sort your voice memos.

GotoTime to set the starting point of the playing.

Erase to erase an individual memo or all voice memos.

Ⅲ

This to erase the selected memo.

Ⅲ

Multiple to erase selected memos.

Ⅲ

All to erase all memos.

Setting the Recording Guard

With this feature, you can record voice memos without

interruption from incoming calls.

1. Press

(right softkey) >

Settings

Memo

RecordingGuard.

2. Select On or Off.

While recording voice memos, your phone will display “Phone

Off.” You cannot make or receive calls.

Setting the Recording Mode

This feature allows you to match the sensitivity of the

microphone to the type of recording you are making.

1. Press

(right softkey) >

Settings

Memo

RecordingMode.

2. Select one of the following options and press

Ⅲ

Dictation to record a single voice.

Ⅲ

Conference to record multiple voices.

Setting the Audio Quality

This feature enables you to set the quality of your recording.

1. Press

(right softkey) >

Settings

Memo

AudioQuality.

2. Select Highor Low.

Note: Recording time varies with the audio quality setting.

Setting Up Screen Call

This feature enables you to screen incoming calls by using a

recorded announcement, either one that is pre-recorded or one

that you have recorded. You can also record the caller’s message

into the Voice Memo list.

Activating Screen Call

TostartScreenCallwhenyouhaveincomingcalls:

ᮣ

When the phone rings or vibrates, press

(right

Options

softkey)>ScreenCall.

TosetAutoScreenCall:

Memo

1. Press

(right softkey) > ScreenCall>Auto>On.

2. Set the answer delay by using numeric keys or by pressing the

navigation key up or down.

3. Press

(left softkey). The icon is displayed on the

Standby display.

Tip: While the caller’s message is being recorded, press

to answer

the call, or press to stop recording and disconnect the call.

Selecting an Announcement for Screen Call

Memo

1. Press

(right softkey) > ScreenCall>Announcement.

2. Depending on your preference, select Pre-Recorded or Custom.

Recording Name for a Pre-Recorded Announcement

Memo

1. Press

(right softkey) > ScreenCall>Announcement.

2. Highlight Pre-Recorded and press

(right softkey) >

Edit

RecordName.

Ⅲ

If your name has already been recorded, select Yes or No

for overwriting.

3. Press

time is 12 seconds.)

4. Press to stop recording.

to start the 1st recording. (The maximum recording

5. After the 1st recording, press

again to start the 2nd

recording.

6. Press

to stop recording.

Recording a Customized Announcement

Memo

1. Press

(right softkey) > ScreenCall>Announcement.

2. Highlight Custom and press

(right softkey) >Record.

Edit

Ⅲ

If your announcement has already been recorded, select

Yes or No for overwriting.

3. Press

to start the 1st recording. (The maximum recording

time is 12 seconds.)

4. Press

to stop recording.

5. After the 1st recording, press

again to start the 2nd

recording.

6. Press

to stop recording.

Reviewing an Announcement

Memo

1. Press

(right softkey) > ScreenCall>Announcement.

2. Highlight Pre-Recorded or Custom and press

(right

Edit

softkey) >Play or Play:Speaker.

Erasing an Announcement

Memo

1. Press

(right softkey) > ScreenCall>Announcement.

2. Highlight Pre-Recorded or Custom and press

(right

Edit

softkey).

3. Select EraseName or Erase. (A confirmation will be displayed.)

4. Select Yes.

10. 10-4

10-4 allows you to enjoy quick, two-way, “walkie-talkie-style”

communication with your friends, family, and co-workers. You

can make 1-to-1 or 1-to-many calls (up to 5 others on the same

call) to any other 10-4 user, anywhere on the Network. You can

make and receive 10-4 calls when your phone displays

Warning! Please be sure that enabling 10-4 affects the phone’s talk and

standby times to a large degree.

Starting 10-4

Setting 10-4 Mode

1. Select

>Settings > 10-4>Enable/Disable>Enable or Disable.

(The default setting is Disable.)

Ⅲ

Enable to make or receive 10-4 calls any time your phone

is not in use.

Ⅲ

Disable to disable your phone’s 10-4 service; you will not

be able to make or receive 10-4 calls or access your 10-4

Contacts entries.

10-4 Call Alerts

There are several ways your phone alerts you during 10-4 calls.

When you make or receive a 10-4 call:

ⅷ

The phone beeps (depending on the Ringer Type).

ⅷ

The backlight illuminates.

ⅷ

The screen displays a 10-4 call message.

ⅷ

The other party’s 10-4 number and name (if available) are

displayed.

ⅷ

The screen displays who has the floor.

The status of a 10-4 call:

ⅷ

The Green LED On indicates you have the floor and may speak.

ⅷ

The Red LED On indicates another contact has the floor.

ⅷ

The LED Off indicates the floor is open. (You can take the

floor and speak by pressing and holding the 10-4 key on the

left side of your phone

Making and Receiving a 10-4 Call

Displaying the 10-4 List

ᮣ

From standby mode, press

(left softkey) or

to access

10-4

the 10-4 List.

Tip: The first time you access the list, the 10-4 Help message will appear.

Press (left softkey) and (left softkey) to read a brief introduction

Yes

of 10-4.

Selecting a Contacts List

When your phone displays a 10-4 List, the left softkey is labeled

Goto. To switch to another Contacts list, press

(left

Go to

softkey) and select your desired list and press

ⅷ

CompanyList/CompanyGrps. contain company-provided

contacts (up to 200 entries). Your company list can only be

created and modified by an authorized administrator on the 10-

4 server. When the lists are empty, Company List/ Company

Grps. will not appear on the display.

ⅷ

PersonalList/PersonalGrps. contain your personal 10-4

Contacts entry’s names and numbers, separately or in groups.

You can create and edit your own personal list. Your phone

can store a total of 200 entries (you may include up to five

Contacts entries per group).

ⅷ

10-4Outgoing shows the last 20 different 10-4 calls you placed.

10-4Incoming shows the last 20 different 10-4 calls you

accepted.

ⅷ

10-4Missed shows the last 20 10-4 calls you missed.

Note: The icon next to the group name indicates a group.

Making a 10-4 Call (1-to-1 Call)

You can place a 1-to-1 10-4 call by selecting a Contacts entry

from the 10-4 List.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey), and select the list from which you

Go to

want to place a call (CompanyList, PersonalList, 10-4Outgoing,

10-4Incoming, or 10-4Missed) and press

Tip: You can also select Enter 10-4# from Go to option to enter a 10-4

number directly. See page 92 for details.

3. Highlight the Contacts entry you want to call, and press and

hold

to place the call and get the floor. (You will see

10-4calling... and Connecting... followed by “Youhavefloor.” You

can now begin speaking.)

– or –

Highlight the Contacts entry you want to call and press and

release

to place the call. (The call will connect as

described above, but “Floorisopen.” will appear on the screen

and either you or other party may press and hold

the floor and speak.)

to take

Note: During a 10-4 call, the “floor” is the right to speak. When you see

“Floor is open.,” the first person to press can speak (while holding

the key). Only the person who has the floor can speak. The phone beeps if

you press when the other party has the floor.

4. Continue holding

speaking, release

as you speak. When you finish

to allow the other party to speak.

(When the other party takes the floor, you will see the

speaker’s name and phone number and the text “hasfloor.”)

5. When you are finished, press

Note: When neither party has the floor during a 10-4 call, “Floor is open.”

appears on the display. If no one takes the floor for 20 seconds, the 10-4

call ends automatically.

Tip: If you press

standard voice call.

during step 3 above, you can make a

Making a 10-4 Call (Group Call)

You can make a 10-4 call to all members in a Group entry, which

you have in your 10-4 List. You can communicate with up to five

members at a time.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey), and select the list from which you

Go to

want to make a Group call (CompanyGrps. or PersonalGrps.)

and press

3. Highlight the group entry you want to call, and press and hold

to place the call and take the floor. (You will see

10-4calling... and Connecting... followed by “Youhavefloor.”

Continue with the 10-4 call as described previously.)

Ⅲ

To make a 10-4 call to a group member, select your

desired group, highlight your desired group member, and

press and hold

Ⅲ

If one of the group members takes the floor, you will see

the member’s name and 10-4 number on the display.

4. When the call is finished, press

Tip: The phone beeps if you press

when another party has the floor.

You can also make a Group Call after checking the group member.

Press to display group members, highlight <Call Group> and

press and hold during step 3 above.

To redial your last 10-4 call, highlight Redial and press

10-4 List.

from the

Making a 10-4 Call by Entering a Number

1. From standby mode, enter the 10-4 number you want to dial.

2. Press to place the 10-4 call.

3. Continue with the 10-4 call, pressing and holding

speak and releasing it to allow other parties to reply.

4. When the call is finished, press

– or –

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey) > Enter10-4#.

Go to

3. Enter the 10-4 number you want to dial.

4. Follow steps 2-4 above.

Making a 10-4 Call Using the Call List Key

Toplacea10-4callusingtheCallListkey:

1. Press

with the phone closed. Recent Calls list appears on

the sub LCD.

2. Use to select a 10-4 history entry.

3. Press and hold

Missed Call Notification for 10-4 Calls

When an incoming 10-4 Call is not answered, the Missed Call

Notification is displayed on your screen.

Tocallthelastmissed10-4Call:

ᮣ

Simply press and hold

while the Missed Call Notification

is displayed. (Continue with the 10-4 call as described

previously.)

Toerasethemissed10-4CallLog:

ᮣ

Press

(right softkey).

Dismiss

Todisplaythemissed10-4call:

ᮣ

Press

(left softkey) while the Missed Call Notification is

View

displayed. To call the entry, highlight the entry you want to

call, and press and hold

described previously.)

. (Continue with the 10-4 call as

Receiving a 10-4 Call

1. Make sure your phone’s 10-4 mode is enabled (see “Setting

10-4 Mode” on page 89).

2. When you receive a 10-4 call from a Contacts entry, “10-4

Call,” the entry’s name, and the 10-4 number appear on the

display.

Ⅲ

When you receive a group call, “Group Call”, group

member’s name, and the 10-4 number appear.

3. If the person placing the call has kept the floor (held the

you will see the entry name and 10-4 number along with

“hasfloor.,” and you will hear the caller speaking.

4. When the caller finishes speaking and releases

, you will

see “Floorisopen.” on the display screen. Press and hold

to take the floor and reply to the caller. (You will see

“Youhavefloor.” and hear a tone confirming that you may

speak.)

5. When the conversation is finished, press

Tip: You can also receive a 10-4 call with the phone closed. Press and

hold to take the floor when the floor is open.

Note: You can change the volume and the speaker setting while a 10-4

call is activated. Volume: Adjust the voice volume by using or by

pressing the navigation key up or down (except when you are pressing

and holding

pressing

). Speaker: Switch the speaker on or off by

10-4 Options

When you use 10-4, several user options are available by

Options

pressing

(right softkey).

ⅷ

Edit to edit a 10-4 number and/or name. (See page 99.)

ⅷ

SendMessage to send a text message. (See page 105 for

details.)

CopytoPersonal to copy a 10-4 Contacts entry in the Personal

Grps., Company List or Company Grps. to the Personal List.

CopyGroup appears when you highlight a group entry. (This

option doesn’t appear if the entry is already in the Personal

List or when you select Personal List/Personal Grps.)

ⅷ

CopytoPh. Book to copy a 10-4 Contacts entry to the Contacts.

Erase to erase a Contacts entry. EraseGroup appears when you

highlight a group entry.

ⅷ

AddContact to add a new Contacts entry. (See page 97 for

details.) AddGroup appears when you highlight a group entry.

(See page 98 for details.)

ⅷ

Erase10-4List to erase lists saved in the 10-4 (except Company

List/Company Grps.).

Help to see the 10-4 instructions page.

Adding and Editing 10-4 Contacts Entry

Copying an Entry to your Personal List , Personal Group

List, or Contacts List

You can copy an entry to your Personal or Personal Group List,

or Contacts from several different sources.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey), and select the list from which you

Go to

want to copy an entry (CompanyList, CompanyGrps., Personal

List, PersonalGrps., 10-4Outgoing, 10-4Incoming, or 10-4Missed)

and press

3. Highlight the entry you want to copy (or scroll to highlight

the Redial entry at the top of your screen) and press

Options

(right softkey). Select an option and press

Ⅲ

CopytoPersonal to copy the Contacts entry to the

Personal List (if available).

Ⅲ

CopyGroup to copy the group entry to the Personal Group

List (if available).

CopytoPh. Book to copy the Contacts entry to the

Contacts.

4. Press

(left softkey) to copy and save the entry to your

Yes

Personal or Personal Group List, or Contacts.

Note: Your Company Lists can be set up and edited only by an

administrator on the 10-4 server. You cannot add or edit Contacts/group

entries to your Company Lists.

Saving a 10-4 Number

You can save a 10-4 number from the ending display to your

Personal or Personal Group list.

1. From the ending display, press

(right softkey) >Save.

Options

2. Enter a name and press

3. Press

(left softkey) >

(left softkey).

Yes

Save

Note: If the number is already stored in the Personal or Personal Group

lists, the “Save” option does not appear.

Finding an Entry in the 10-4 List

You can find your desired entry by entering a few letters.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey), and select your desired list

Go to

(CompanyList, CompanyGrps., PersonalList, or PersonalGrps.)

and press

3. Enter the first letter or the first few letters of the name.

Ⅲ

The display shows the list beginning with the letter(s)

you entered.

4. Scroll through the list and press

to select your desired

entry.

Adding a New Contacts Entry to Your Personal List

You can store the total of 200 entries in the Personal List.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey) > PersonalList> <AddContact>.

Go to

3. Enter a name for the new Contacts entry and press . (This is

the name you will see when calling or receiving a call from the

entry.)

4. Select the 10-4Number field, enter the Contacts entry’s 10-digit

10-4 number (their phone number) and press

5. Press (left softkey) to save the new Contacts entry to

Save

your Personal List.

Tip: You are not allowed to use the following symbols during step 3:

@ : ; / * ) (.

Adding a New Group to Your Personal Group List

You can add new groups to the Personal Group List. Each group

can include up to five members. You can enter a group member

directly, or select the member from the Company List or

Personal List.

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey) > PersonalGrps. ><AddGroup>.

Go to

3. Enter a Group Name, and press

(left softkey) >

(left

softkey).

4. Press

(right softkey).

Add

5. Select an option and press

Ⅲ

New to add a new Contacts entry. See the previous page

for details.

Ⅲ

fromCompany to add a Contacts entry from your Company

List (if applicable).

fromPersonal to add a Contacts entry from your Personal

List.

6. Scroll to select the Contacts entries you want to add and press

(right softkey) to include the entries.

Pick

7. Press

(left softkey) when you are finished selecting

Done

Contacts entries, then press

(left softkey) to update

Update

your Personal Group List with the new group entry.

Tip: You can also add members directly. From step 4 above, highlight

<Add Members> and press . Enter the new member’s name and 10-4

number and press

(left softkey) to save the entry.

Save

Editing a Contacts Entry in Your Personal List

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey) > PersonalList.

Go to

3. Highlight the entry you want to edit and press

(right

Options

softkey) > Edit.

4. Select the field you want to edit (Name or 10-4Number) and

press

5. Edit the entry, and press

(left softkey)>

(left softkey)

Save

to save your changes.

Editing a Group in Your Personal Group List

1. Press

(left softkey) or

to access the 10-4 List.

10-4

2. Press

(left softkey) > PersonalGrps.

Go to

3. Highlight the group entry you want to edit and press

Options

(right softkey) > Edit.

4. Edit the group name and press

(left softkey).

Ⅲ

If you don’t need to edit the group name, press

(left

softkey) and skip step 5.

5. Press

(left softkey) to save your changes.

Save

6. To edit a group member, highlight the Contacts entry you

want to edit and press (right softkey) > Edit.

Options

7. Select the field you want to edit (Name or 10-4Number) and

press

8. Edit the entry, and press

(left softkey) >

(left softkey)

Save

(left softkey).

Update

Erasing 10-4 List Entries

ErasinganEntryinYourPersonalListorPersonalGroupList

ToeraseaContactsentryoragroupentry:

1. From the 10-4 List, press

(left softkey) > PersonalList or

Go to

PersonalGrps.

2. Highlight the entry you want to erase and press

(right

Options

softkey) >Erase.

Ⅲ

EraseGroup appears when you select PersonalGrps.

3. Select Yes.

Toeraseagroupmember:

1. From the 10-4 List, press

(left softkey) >PersonalGrps.

Go to

2. Select your desired group and press

to display the group

members.

3. Highlight the Contacts entry you want to erase and press

(right softkey).

Options

4. Select Erase>Yes>

(left softkey).

Update

Erasing a 10-4 List

You can erase all lists saved in the 10-4 (except Company

List/Company Grp. List).

1. From the 10-4 List, press

(right softkey) >

Options

Erase10-4List.

2. Select an option and press

Ⅲ

Outgoing to erase all outgoing 10-4 calls.

Incoming to erase all incoming 10-4 calls.

Missed to erase all missed 10-4 calls.

Ⅲ

AllCalls to erase all 10-4 call history, except redial.

AllPersonalEnt. to erase all entries in Personal Lists and

Personal Grps. You are prompted to enter your 4-digit

lock code. (See “Unlocking Your Phone” on page 51.)

3. Select Yes.

Tip: The Redial number will not be erased.

100

Updating the Company List and Personal List

ToupdateyourCompanyorPersonallistmanuallythrough10-4

server:

ᮣ

Select

>Settings>10-4>ListUpdate.

Managing 10-4 Settings

Setting Speed Dialing for 10-4 Entries

1. Select

2. Select an unassigned number and press

3. Press (left softkey), and select the list from which you

>Contacts >SpeedDial#s.

Go to

want to set a speed dial (CompanyList, CompanyGrps., Personal

List, or PersonalGrps.) and press

4. Select the Contact entry and press

– or –

Select the group, and select an option and press

Ⅲ

Assign to assign the selected group as a speed dial.

Ⅲ

Details to display the group details. You can select the

group member from the group list.

Tousespeeddialfora10-4entry:

ᮣ

From standby mode, press the appropriate key and press

101

Setting 10-4 Guard

This feature enables you to display the warning message when

you cannot receive 10-4 calls. The warning message appears

when you are launching the Web or Java applications.

1. Select

> Settings>10-4>10-4Guard. (A message will be

displayed.)

2. Press

(left softkey) to continue.

3. Select On to activate 10-4 Guard. (Select Off to deactivate this

feature.)

Setting Ringer Types for 10-4 Calls

1. Select

>Settings>10-4> Sounds> RingerType.

2. Select 10-4Calls, 10-4Missed, or 10-4FloorTone.

3. Select your desired ringer type and press

Setting the Ringer Volume for 10-4 Calls

1. Select

>Settings>10-4> Sounds> RingerVolume.

2. Select SeparateVol. and press the navigation key left or right to

select a volume level.

3. Press

(left softkey) to save.

Done

Setting a Vibrate Pattern for 10-4 Calls

You can select your favourite vibrate pattern for 10-4 calls.

1. Select

>Settings>10-4> Sounds> VibratePattern.

2. Select 10-4Calls or 10-4Missed.

3. Select a vibrate pattern and press

102

Setting an Alert Notification for 10-4 Calls

1. Select

2. Select 10-4Calls, 10-4Missed, or HeadsetAlert.

3. Select an option and press

Toadjustthefloortonevolume:

>Settings>10-4> Sounds> Alerts.

1. Select

>Settings>10-4> Sounds> Alerts.

2. Select FloorToneVol. >Earpiece or Speaker.

3. Press the navigation key left or right to select a volume level

and press

(left softkey).

Done

Tip: You can also set alerts using the Alerts settings menu. (See “Alert

Notification” on page 32.)

Setting the Speakerphone for 10-4 Calls

ᮣ

Select > Settings>10-4>Speakerphone>On or Off.

Note: If the phone’s ringer volume is set to Vibrate All, Ringer off, or

Silence All, the speakerphone turns off. Press

speakerphone mode on.

to turn the

Selecting the Default View of the 10-4 List

1. Select

>Settings>10-4> DefaultView. (The default setting is

Personal List.)

2. Select your desired list and press

Setting the Floor Display of the 10-4 Calls

1. Select

>Settings>10-4> FloorDisplay.

2. Select TextOnly or Text&Image.

Ⅲ

To see a preview of the display, press

(right

Preview

softkey).

103

11. Messaging

New Messages

Toviewanewmessage:

ᮣ

When you receive a text message or a Web Alert, it will

automatically appear on your phone’s main display screen

with the

icon. When you receive a picture message, the

information of the message appears on your phone’s main

display screen with the

view the message.

icon. Press

(left softkey) to

Note: When there are two or more notifications, a Missed Alerts list is

displayed in standby mode. Highlight a text/picture message in the

list and press

(left softkey) to display the message details.

View

You can choose to show only the icon when you receive a

message(s). In this case, select > Messaging >Text,

Picture Msg, or Web Alerts, and select a message and press

to view a message. See “Setting Message Notification” on

page 40.

Use your navigation key to scroll down and view the entire

message.

ⅷ

Press

(left softkey) to dial the callback number.

Call

ⅷ

(left softkey) to reply to the sender.

(left softkey) to go to the Web site.

(left softkey) to forward the message (appears

Forward

only if there is no sender’s phone number, email address, or

callback number).

ⅷ

Press

(right softkey) to display options.

Options

Displaying Messages

Todisplayatextmessagefromthemainmenu:

1. Select

2. Select Text >Inbox, SentMail, Pending, Drafts, or your defined

folder and press

3. Select the message you want to see and press . (To display

the message options, press [right softkey].)

>Messaging.

Options

104

Todisplayapicturemessagefromthemainmenu:

1. Select >Messaging>PictureMsg.

2. Select your desired picture message and press

3. Press (left softkey) to display the picture message.

TodisplayWebAlerts:

1. Select >Messaging>WebAlerts.

2. Select the header of the message you want to see and press

(To display the web alerts options, press

[right

Options

softkey].)

Toreadothermessages:

ᮣ

Press the navigation key right or left to read the next or

previous message.

Note: Web Alerts include URLs etc. When you buy a ringer or image

through your computer for your phone, your phone will receive Web

Alerts. Press

(left softkey) to go to the website and follow steps to

download it to your phone.

Sending a Text Message

1. Select

>Messaging>SendMessage>Text.

2. Select the entry method you prefer:

Ⅲ

Contacts to select a recipient from your internal Contacts.

(Qualifying Contacts entries must contain a phone

number or an email address.)

Ⅲ

Phone# to enter the phone number of the person to

whom you wish to send a message.

Email to enter the recipient’s email address.

Note: You can also press

your desired list.

(right softkey) to select recipients from

Others

3. Press

to confirm the recipient. (You may include up to 50

recipients per message.)

4. Press (left softkey) when you have finished selecting and

entering recipients.

105

5. Compose a message and press

(left softkey).

Ⅲ

To enter a message, use your keypad to type your

message. Press (right softkey) to select a character

Mode

input mode. (See “Selecting a Character Input Mode” on

page 25.)

6. Scroll down to select the message priority (Normal or Urgent),

set the callback number, and/or set the signature.

7. Review your message and press

(left softkey). (You may

Send

also select additional messaging options by pressing

Options

[right softkey] to change the recipients or save to draft.)

Tip: You can also send a text message when the left softkey displays the

option.

Send Msg

Creating Folders for Messages

You can create up to ten folders to store your Messages. When

10 of your defined folders exist, the “Create Folder” option will

not appear.

Tocreateanewfolder:

1. Select

>Messaging>Text.

(right softkey) >CreateFolder.

2. Press

Options

3. Enter a folder name and press

4. Press (left softkey).

(left softkey).

Save

Tosetanoptionalfeaturefortheaddedfolder:

1. During step 3 above, scroll down to select other menu options.

Ⅲ

AutoFilingto file messages into the folder automatically.

The following options appear when this feature is set to on.

Ⅲ

Keywordto set a keyword for Auto Filing. Enter a

keyword and press

Ⅲ

Notify to set the notification display to on or off when

you have an unread message matching the defined

folder.

EnvelopeIcon to set the envelope icon display to on or

off when you have unread message matching the

defined folder.

2. Press

(left softkey).

Save

106

Erasing Messages

1. Select

>Messaging>Text.

2. Select Inbox, SentMail, Pending, Drafts, or your defined folder

and press

3. Highlight a message you want to erase and press

(right

Options

softkey)>Erase.

4. Select This.

Tip: This option may not be displayed if you save only one message in a

folder.

To erase all messages, select All.

5. Select Yes.

Erasing Selected Messages in All Folders

1. Open any message folder. (By following steps 1-2 above.)

2. Press

3. Press

4. Press

(right softkey) >Erase> Multiple.

Options

to select messages to be erased.

(left softkey).

Erase

107

12. Using Bluetooth

Bluetooth is a short-range communications technology that

allows you to connect wirelessly to a number of Bluetooth

devices, such as headsets, hands-free car kits, and Bluetooth

enabled handhelds, PCs, and wireless phones. The Bluetooth

communication range is usually up to approximately 10 meters

(30 feet).

Accessing the Bluetooth Menu

ᮣ

Select

>Settings>Bluetooth.

Turning Bluetooth On and Off

By default, your phone’s Bluetooth feature is turned off. Turning

Bluetooth on makes your phone “available” to other in-range

Bluetooth devices. To make your phone visible to other devices

you must also set your phone’s visibility to other than Hidden.

(See page 109.)

1. From the Bluetooth menu display, select Enable/Disable.

2. Select Enable to enable Bluetooth. Select Disable to disable

Bluetooth.

Note: Enabling the Bluetooth settings affect the phone’s talk and standby

times.

Bluetooth Status Indicators

The following icons show your Bluetooth connection status at a

glance:

ⅷ

– Bluetooth feature is active. It turns to green when

connected to a Bluetooth device.

ⅷ

– Your phone is discoverable by another Bluetooth device.

ⅷ

– Your phone is communicating with a Bluetooth device.

108

Using the Bluetooth Settings Menu

The BluetoothSettings menu allows you to set up many of the

characteristics of your phone’s Bluetooth service, including:

ⅷ

Setting your phone’s visibility (or “discoverability”) for other

Bluetooth devices

ⅷ

Choosing a device for your Bluetooth calls

ⅷ

Entering or changing the name your phone uses for Bluetooth

communication

ⅷ

Displaying your phone’s Bluetooth device information

Bluetooth Settings: Visibility

Visibility to manage your phone’s availability to other Bluetooth

devices.

Toconfigureyourphone’svisibility(discoverability)toother

Bluetoothdevices:

1. From the Bluetooth menu display, select Visibility.

2. Select a Visibility setting and press

Ⅲ

AlwaysVisible to allow other Bluetooth devices to detect

and identify your phone.

Ⅲ

Visiblefor3min. to allow other Bluetooth devices to detect

your phone for 3 minutes, after which it returns to hidden

mode.

Hidden to prevent other Bluetooth devices from

detecting and identifying your phone.

Note: It is recommended that your phone is in standby mode when

receiving data from other devices via Bluetooth.

Bluetooth Settings: Voice Priority

VoicePriority allows you to choose the default device you want to

use for incoming and outgoing calls.

Tosetthevoicepriority:

1. From the Bluetooth menu display, select VoicePriority.

2. Select Phone or Hands-free.

Ⅲ

Phone to switch the audio between your phone and

hands-free devices.

Ⅲ

Hands-free to allow hands-free devices only to be used.

109

Bluetooth Settings: My Device Name

MyDeviceName allows you to select a Bluetooth name for your

phone. Your phone’s Bluetooth name will appear to other in-

range Bluetooth devices, depending on your Visibility settings.

TosetaBluetoothnameforyourphone:

1. From the Bluetooth menu display, select MyDeviceName.

2. Press and hold

to clear the current name.

3. Use your keypad to enter a new name and press

Bluetooth Settings: My Device Information

Todisplayyourphone’sdeviceInformation:

ᮣ

From the Bluetooth menu display, select MyDeviceInfo.

Setting Auto-Accept

You can configure your phone’s accessibility to other Bluetooth

devices.

Toconfigureyourphone’saccessibilitytootherBluetooth

devices:

1. Select

2. Highlight the device from the trusted devices list and press

(right softkey) > Auto-Accept.

>Tools>Bluetooth.

Options

3. Select a setting and press

Ⅲ

Onto allow other Bluetooth devices to initiate a

connection without any confirmation.

Ⅲ

Offto display a confirmation screen, from which you can

accept or deny the connection.

110

Bluetooth Profiles

All the Bluetooth settings you configure are stored in your

phone’s Bluetooth user profile. Different profiles can be used for

specific Bluetooth functions.

ⅷ

HeadsetProfile – This profile functions as a wireless ear jack.

When an incoming call is received, the ringer can be heard

through the headset. While using your phone, you can use the

headset instead of the phone by pushing a button on the

headset, which has the same effect as inserting a jack into the

phone. Increase or decrease the volume by using

on the

left side of the phone

ⅷ

Hands-FreeProfile – This profile functions as a wireless car kit.

Incoming calls ring to the hands-free headset or device. Calls

can be received by pressing a button on the headset or device.

For dialing, four functions are supported: recent call dial,

voice dial, speed dial, and number dial. Increase or decrease

the volume by using

ⅷ

DUN:Dial-UpNetworkProfile – This profile functions as a

wireless data cable, connecting a PC or PDA to a network

through your phone.

OPP:ObjectPushProfile – This profile uses the Generic Object

Exchange profile services to send data objects between

devices and can be used to exchange objects like calendar

(vCal) and business cards (vCard).

ⅷ

BPP:BasicPrintingProfile – This profile enables simpler

printing from your phone to a Bluetooth wireless technology

enabled printer.

111

Pairing Bluetooth Devices

Paired Devices

The Bluetooth pairing process allows you to establish a trusted

connection between your phone and another Bluetooth device.

When devices are paired, a passcode (PIN Code) is shared

between devices, allowing for fast, secure connections while

bypassing the discovery and authentication process.

TopairyourphonewithanotherBluetoothdevice:

1. Select

>Tools>Bluetooth><AddNew>>Search. (Your

phone will display a list of discovered in-range Bluetooth

devices.)

2. Select the device you wish to pair with and press

3. Select AddtoTrusted.

4. Enter the passcode and press . (When the owner of the

other device accepts the connection and enters the same

code, the pairing is complete.)

Waiting for Request

If you are going to be using a Dial-Up Network (DUN) profile to

pair with a PC or PDA, you will need to allow the other device to

initiate pairing with your phone.

ToallowyourphonetobepairedwithanotherBluetoothdevice:

1. Select

2. Follow the onscreen prompts to enter your passcode and

press

>Tools>Bluetooth><AddNew>>WaitforRequest.

112

Using the Trusted Devices Options

Once you have created paired devices, several options are

available from the trusted devices list.

Tousethetrusteddevicesoptions:

1. From the trusted devices list, highlight a device.

2. Press

(right softkey) to display the following options:

Options

Ⅲ

Connect or Disconnect to connect to or disconnect from

the Bluetooth device (if applicable).

Ⅲ

SendItem to send an item saved on your phone to another

Bluetooth device (if applicable).

Printto print the data using Basic Printing Profile or

Object Push Profile (if applicable).

Ⅲ

EditName to edit the name of the trusted device.

Auto-Acceptto configure your phone’s accessibility to

other Bluetooth devices. (See page 110.)

Ⅲ

DeviceInfo to display the trusted device’s information.

Sortby to sort the trusted devices.

Delete to delete the selected device from the list.

DeleteAll to delete all devices from the list.

Settings to display the Bluetooth settings menu.

(See page 109.)

113

Printing Data via Bluetooth

You can print out your Contacts entries, business card, calendar

event, and messages stored on the phone. (Some Bluetooth

wireless technology enabled printers may not support this

feature.)

ToprintdataviaBluetooth:

1. Select

2. Highlight the device from the trusted devices list and press

(right softkey) >Print.

>Tools>Bluetooth.

Options

3. Select a category (BusinessCard, Contacts, CalendarEvent,or

Message) and press

4. Follow the onscreen instructions to select the item(s) to print.

5. Select HandsetDefault or PrinterDefault.

Ⅲ

HandsetDefaultto print items by creating a print job via

the Basic Printing Profile.

Ⅲ

PrinterDefaultto print items using the default printer

settings via the Object Push Profile.

6. Make sure the printer is ready to print data, and press

(left softkey).

7. If necessary,enter the PIN and press

Note: Before you start using the Bluetooth feature, make sure your

phone’s battery is fully charged.

114

Sending Data via Bluetooth

You can send data saved on your phone to another Bluetooth

device.

1. Select

2. Highlight the device from the trusted devices list and press

(right softkey)>SendItem.

>Tools>Bluetooth.

Options

3. Select your desired item (BusinessCard, Contactsor

CalendarEvent) and press

4. Follow the onscreen instructions to select the item(s) to send.

5. Make sure the other device is ready to receive data, and then

press

(left softkey).

Send

6. If necessary, enter the PIN and press

Note: Due to different specifications and features of other Bluetooth

wireless technology compatible devices, display and operations may be

different, and functions such as transfer or exchange may not be

possible with all Bluetooth wireless technology compatible devices.

115

13. Service Features

Using Voicemail

All unanswered calls to your phone are automatically transferred

to voicemail, even if your phone is in use or turned off.

Voicemail Notification

There are several ways your phone alerts you to new voicemail

messages:

ⅷ

By displaying a message on the screen.

ⅷ

By playing the assigned ringer type.

ⅷ

By blinking the LED.

ⅷ

By displaying

at the top of your screen.

New Voicemail Message Alerts

When you receive a new voice message, your phone alerts you

and prompts you to call your voicemail.

Tocallyourvoicemail:

ᮣ

Press

– or –

Select

>Messaging>Voicemail>CallVoicemail or

Call:SpeakerOn if you select IconOnly in Notification setting.

(See “Setting Message Notification” on page 40.)

Todisplayyourmissedalerts:

ᮣ

Select

> MissedAlerts.

Displaying Voicemail Details

ᮣ

Select

> Messaging> Voicemail>Details.

116

Retrieving Your Voicemail Messages

ᮣ

Press and hold

. (Your phone will dial your voicemail

box.)

– or –

Select

> Messaging>Voicemail>CallVoicemail.

Note: You are charged for airtime minutes when you are accessing your

voicemail from your phone.

Clearing the Message Icon

ᮣ

Press

> Messaging>Voicemail>ClearCount>Yes.

Editing Your Voicemail Number

You may need to change the number to retrieve your voicemail.

Tochangethenumber:

1. Select

> Messaging > Voicemail > EditVoicemail#.

2. Edit your voicemail number and press

Toresetyourvoicemailnumber:

1. Select

2. Press

3. Press

> Messaging > Voicemail > EditVoicemail#.

(right softkey) > ResetVoicemail# > Yes.

Options

117

Responding to Call Waiting

When you are on a call, Call Waiting alerts you to incoming calls

by sounding beeps. Your phone’s screen informs you that

another call is coming in and displays the caller’s phone number

(if available).

Torespondtoanincomingcallwhileyou’reonacall:

ᮣ

Press

. This puts the first caller on hold and answers the

second call.

Toswitchbacktothefirstcaller:

ᮣ

Press

again.

Note: Call Waiting may not be available while roaming off the home network.

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the same

time. When using this feature, the normal airtime rates will be

charged for each of the two calls.

1. Enter a number you wish to call and press

2. Once you have established the connection, press

to put

the first caller on hold.

3. Enter the second number you wish to call and press

4. When you’re connected to the second party, press

again

to begin your three-way call.

If one of the people you called hangs up during your call, you

and the remaining caller stay connected. If you initiated the call

and are the first to hang up, all three callers are disconnected.

118

Web

With Web access on your phone, you will be able to browse

full-color graphic versions – not just text versions – of your

favourite website, making it easier than ever to stay informed

while on the go. Check sports scores, trade stocks, and shop all

on your phone anywhere on the Home network.

Launching the Web

ᮣ

Press

– or –

Select

> Web.

Net Guard

With the Net Guard setting, the confirmation display will appear

to connect to the Internet. This feature helps you avoid

accidental connections. You can disable the Net Guard in the

future by selecting AlwaysAuto-Connect when the Net Guard is

displayed.

ᮣ

Select

> Settings>Internet>NetGuard.

Ⅲ

On to enable the Net Guard.

Ⅲ

Off to disable the Net Guard.

Browsing the Web

CreatingaBookmark

Bookmarks allow you to store the address of your favourite

websites for easy access at a later time.

1. Launch the Web page you want to mark.

2. Press right softkey to go to the browser menu.

3. Select Markthispage>

(left softkey).

4. Press

(left softkey).

Save

Note: Bookmarking a page does not store the page contents, just its

address.

Some pages cannot be bookmarked. Whether a particular Web

page may be marked is controlled by its creator.

119

AccessingaBookmark

1. Launch the Web and press right softkey to access the browser

menu.

2. Select ViewBookmarks.

3. Highlight the bookmark you wish to access and press

(left

softkey).

EditingaBookmark

1. Access ViewBookmarks menu. (See “Accessing a Bookmark”

above.)

2. Highlight the bookmark you wish to edit and press the right

softkey.

3. Select Edit.

4. Edit the address or title, and press

(left softkey).

5. Press

(left softkey).

Save

DeletingaBookmark

1. Access ViewBookmarks menu. (See “Accessing a Bookmark”

shown above.)

2. Highlight the bookmark you wish to erase and press right

softkey.

3. Select Delete>

(right softkey).

Yes

GoingtoaSpecificWebsite

1. Launch the Web and press right softkey to display the browser

menu.

2. Select GotoURL... >InputAddress.

3. Enter the URL of the website you wish to go to, and press

(left softkey).

Note: Not all websites are viewable on your phone.

120

ReloadingaWebPage

1. Launch the Web and press right softkey to display the browser

menu.

2. Select Refreshthispage.

RestartingtheWebBrowser

If the Web browser seems to be malfunctioning or stops

responding, you can usually fix the problem by simply restarting

the browser.

TorestarttheWebbrowser:

1. Launch the Web and press right softkey to display the browser

menu.

2. SelectMore... > RestartBrowser.

SendingaWebPage

This feature allows you to send a URL (Web site address) you’re

viewing through text messaging.

1. Launch the Web and press right softkey to display the browser

menu.

2. Select SendPage.

3. To complete and send a Web Page, follow steps 2-7 in

“Sending a Text Message” on page 105.

AdjustingtheBrowserSoundVolume

1. Launch the Web and press right softkey to display the browser

menu.

2. Select More... > Preferences > SoundVolume.

3. Select your desired volume level by pressing the navigation

key and press

121

Downloading through the Wireless Web

Your phone allows you to download images (screen savers),

ringers, games, etc., from a website.

1. Select

> MyContent.

2. Select your desired data folder (for example, Games, Ringers,

ScreenSavers, or Applications).

3. Select GetNew to start up the browser.

4. Select your desired image or ringer file, and follow the system

prompts.

Using Application Manager

Your phone allows you to run multiple applications

simultaneously. You can control applications using the

Application Manager.

TousetheApplicationManager

1. Select

> MyContent > ApplicationMgr.

2. Select an application or an alert and press

(right

Options

softkey) to display the following options:

Ⅲ

ViewAlert to display an alert screen.

Ⅲ

IgnoreAlert to ignore the alert.

Ⅲ

BringtoFront to display the application screen in the

foreground.

Ⅲ

ExitApplication to close the application.

LaunchNewApp to launch a new application.

122

14. Safety Guidelines

Maintaining Your Phone’s Peak Performance

ⅷ

Hold the phone with the antenna raised, fully extended, and

over your shoulder.

ⅷ

Try not to hold, bend, or twist the phone’s antenna.

ⅷ

Don’t use the phone if the antenna is damaged.

ⅷ

Avoid exposing your phone and accessories to rain or liquid

spills. If your phone does get wet, turn the power off and

immediately remove the battery.

Using Your Phone While Driving

Talking on your phone while driving (or operating the phone

without a hands-free device) is prohibited in some jurisdictions.

Laws vary as to specific restrictions.

ⅷ

Let the person you are speaking to know you are driving; if

necessary, suspend the call in heavy traffic or hazardous

weather conditions.

ⅷ

Do not take notes or look up phone numbers while driving.

Following Safety Guidelines

To operate your phone safely and efficiently, always follow any

special regulations in a given area. Turn your phone off in areas

where use is forbidden or when it may cause interference or

danger.

123

UsingYourPhoneNearOtherElectronicDevices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, RF signals from wireless

phones may affect inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately

shielded electronic operating systems and/or entertainment

systems in motor vehicles. Check with the manufacturer or their

representative to determine if these systems are adequately

shielded from external RF signals. Also check with the

manufacturer regarding any equipment that has been added to

your vehicle.

Consult the manufacturer of any personal medical devices, such

as pacemakers and hearing aids, to determine if they are

adequately shielded from external RF signals.

Note: Always turn off the phone in health care facilities and request

permission before using the phone near medical equipment.

Turning Off Your Phone Before Flying

Turn off your phone or set your phone to Airplane mode before

boarding any aircraft. To prevent possible interference with

aircraft systems, Transport Canada regulations require you to

have permission from a crew member to use your phone while

the plane is on the ground.

124

Turning Off Your Phone in Dangerous Areas

To avoid interfering with blasting operations, turn your phone

off when in a blasting area or in other areas with signs indicating

two-way radios should be turned off. Construction crews often

use remote-control RF devices to set off explosives.

Turn your phone off when you’re in any area that has a

potentially explosive atmosphere. Although it’s rare, your

phone and accessories could generate sparks. Sparks can cause

an explosion or fire, resulting in bodily injury or even death.

These areas are often, but not always, clearly marked. They

include:

ⅷ

Any area where it is very humid and with inflammables.

ⅷ

Fuelling areas such as gas stations.

ⅷ

Below deck on boats.

ⅷ

Fuel or chemical transfer or storage facilities.

ⅷ

Areas where the air contains chemicals or particles such as

grain, dust, or metal powders.

ⅷ

Any other area where you would normally be advised to turn

off your vehicle’s engine.

Note: Never transport or store flammable gas, liquid or explosives in the

compartment of your vehicle that contains your phone or accessories.

125

Restricting Children’s Access to Your Phone

Your phone is not a toy. Do not allow children to play with it as

they could hurt themselves and others, damage the phone or

make calls that increase your telephone bill.

Protecting Your Battery

The guidelines listed below help you get the most out of your

battery’s performance.

ⅷ

Use only approved batteries and chargers. These chargers are

designed to maximize battery life. Using other batteries or

chargers voids your warranty and may cause damage.

ⅷ

In order to avoid damage, charge the battery only in

temperatures that range from 0º C to 45º C (32º F to 113º F).

ⅷ

Don’t store the battery in a high humidity environment.

ⅷ

Don’t use the battery charger in direct sunlight or in high

humidity areas, such as the bathroom.

ⅷ

Never dispose of the battery by incineration.

ⅷ

Keep the metal contacts on top of the battery clean.

ⅷ

Don’t attempt to disassemble or short-circuit the battery.

ⅷ

Don’t store the battery in high temperature areas for long

periods of time. It’s best to follow these storage rules:

Less than one month:

-20º C to 60º C (-4º F to 140º F)

More than one month:

-20º C to 45º C (-4º F to 113º F)

126

Disposal of Lithium Ion (Li-Ion) Batteries

For safe disposal options of your Li-Ion batteries, please ensure

that disposal of this in accordance with law and regulation.

ⅷ

Do not dispose of the battery in fire; the cell may explode.

ⅷ

Do not open or puncture the battery; the released electrolyte

is corrosive and may cause damage to the eyes and skin.

SpecialNote: Be sure to dispose of your battery properly. In some

areas, the disposal of batteries in household or business trash

may be prohibited.

Note: For safety, do not handle a damaged or leaking Li-Ion battery.

Cautions

Any changes or modifications to your phone not expressly

approved in this document could void your warranty for this

equipment and void your authority to operate this equipment.

Only use approved batteries, antennas and chargers. The use of

any unauthorized accessories may be dangerous and void the

phone warranty if said accessories cause damage or a defect to

the phone.

Although your phone is quite sturdy, it is a complex piece of

equipment and can be broken. Avoid dropping, hitting, bending

or sitting on it.

127

This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or

registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part

on the work of the Independent JPEG Group.

The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by

SANYO is under license. Other trademarks and trade names are those of their respective owners.

128

Headset Mode 48

Holster 10

Index

Abbreviated Dialing 24, 47

Airplane Mode 42

Alarm Clock 77

Alert Notification 32

Animation 35

Answering Calls 16

Any Key Answer 45

Audio Quality 86

Auto Answer 45

Icon Definition 5, 80

In-Call Options 19

Key Beep Volume 30

Key Press Echo 32

Language 25, 41, 45, 49

Location Settings 39

Lock Code 51

Lock Mode 51

Locking Your Phone 50

Background 35

Backlight 34

Battery

Charging 9

Installing 8

Removing 8

Bluetooth 108

Bookmarks 119

Making Calls 13

Menu Diagram 56

Menu Style 34

Message Notification 40

Messaging 40, 104

Missed Call Notification 18, 93

My Content

Accessing Menus 122

Erasing 53

My Favourites 44

Calculator 79

Calendar 36, 69

Call Alarm 71

Call History 58

Call Memo 83

Call Waiting 118

Callback Number 41

Canned Messages 25, 40

Contacts 61

Net Guard 119

Open/Close Flip Option 46

Countdown Timer 78

Phone (illus.) 2

Phone Number

Dialing With Pauses 22

Displaying 13

Finding 21

Dialing Options 15

Display Screen Icons 5

Display Settings 34

Emergency Numbers 18

Entering Text 25

Saving 21, 22

129

Recording Mode 86

Resetting Your Phone 54

Restricting Calls 52

Ringer Types 29, 102

Roaming 55

Vibrate Pattern 31

Voice-Activated Dialing 81

Voice Dial Tags

Erasing 53, 82

Playing 82

Programming 81

Voice Memo 83

Voice Prompt 31

Voicemail

Clearing Message Icon 117

Editing Number 117

Notification 116

Retrieving 117

Safety 123

Screen Call 17, 87

Screen Saver 36

Security Menu 50

Setup Options 44

Side Key Guard 49

Silence All 33

Volume Settings 30, 102

Sleep Mode 38

Sound Settings 29

Special Numbers 52

Speed Dialing 23, 66, 101

Start-up/Power-off Tone 31

Stop watch 78

Web 119

World Clock 79

T9 Text Input 26

Text Greeting 35

Text Message 104, 105

Three-Way Call 118

To Do List 72

Tone Length 31

TTY 43

Turning Your Phone On and Off 7

Unlocking Your Phone 51

130

Notes

West Bend SOHO SHCM100 User Manual
TRENDnet Computer Accessories TV IP312W User Manual
Sony Xperia micro 1265 2574 User Manual
Sony XDCAM HD PDW HD1500 User Manual
Sony Rechargable Battery Pack VGP BPSC31 User Manual
Sony Ericsson T226S User Manual
Seagate Barracuda ST320DM000 User Manual
Samsung SH R522C User Manual
Roberts Radio CR9926 User Manual
Philips AZ3856 User Manual