Sanyo SCP 7050 User Manual

USER GUIDE  
-
SCP 7050  
Table of Contents  
1. The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Front View of Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2  
Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5  
Turning Your Phone ON and OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Turning Your Phone ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Turning Your Phone OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7  
Using the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Installing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Removing the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8  
Charging the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Using the Phone Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9  
Using the Holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Attaching the phone to the holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10  
Removing the phone from the holster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11  
Navigating Through Phone Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Selecting Menu Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12  
Displaying Your Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13  
Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15  
Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16  
Missed Call Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18  
In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19  
End-of-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20  
Saving a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Finding a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .21  
Dialing and Saving Phone Numbers With Pauses . . . . . . . . . . . . . . . . . . . .22  
Dialing From the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Using Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23  
Using Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24  
Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Selecting a Character Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25  
Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . .26  
Entering Characters Using Alphabet Mode . . . . . . . . . . . . . . . . . . . . . . . . . .27  
Setting the Default Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28  
2. Your Phone’s Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .29  
Adjusting the Phone’s Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30  
Selecting Vibrate Pattern . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Selecting a Tone Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Setting a Start-up/Power-off Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Using Voice Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .31  
Setting Up Key Press Echo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32  
Silence All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33  
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Changing the Phone’s Menu Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Changing the Backlight Time Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34  
Power Save Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Changing the Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Changing the Background . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Changing the Display Screen Animation . . . . . . . . . . . . . . . . . . . . . . . . . . . .35  
Changing the Display for Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Changing the Screen Saver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36  
Changing the Clock/Calendar Display for Standby Mode . . . . . . . . . . . . .36  
Changing the Font Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Setting Return to Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37  
Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38  
Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39  
Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Setting Message Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Setting Push Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Editing Canned Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40  
Setting Your Callback Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Setting Your Signature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41  
Setting Drafts Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42  
TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43  
Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
My Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44  
Setting the Text Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Setting Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Auto Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45  
Setting the Open/Close Flip Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46  
Setting Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Setting Power On to Alert . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47  
Headset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Setting Navigation Key Shortcuts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48  
Setting Side Key Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
Changing the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49  
3. Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Using Your Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50  
Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51  
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52  
Erasing Phone Content . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Resetting the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53  
Resetting Favourites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Restoring Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54  
4. Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Recognizing Icons on the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Roaming on Other Networks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55  
5. Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
Menu Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56  
6. Managing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .58  
Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59  
Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . .60  
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60  
7. Using Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Assigning a Group Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61  
Finding Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
Finding Names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62  
Finding Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Finding Group Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Contacts Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63  
Adding a Phone Number to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . .64  
Editing a Contacts Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Erasing a Contacts Entry From the List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65  
Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66  
Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Selecting a Ringer Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67  
Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
Dialing Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .68  
8. Personal Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69  
Using Your Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69  
Displaying Your Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69  
Changing the Calendar Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .69  
Adding a schedule to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70  
Adding a Call Alarm to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71  
Adding To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72  
Adding a To Do List Item to the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . .72  
Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73  
Event Alert Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73  
Viewing Day’s Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73  
Editing an Event on the Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74  
Event List Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Erasing Events . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75  
Going to a Specified Date . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76  
Using Your Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77  
Using the Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77  
Using the Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78  
Using the Countdown Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78  
Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79  
Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79  
Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Displaying Phone Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Finding Icon Definition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Displaying the Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
Displaying Advanced Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80  
9. Voice Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81  
Making a Call Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . .81  
Programming Voice Dial Tag to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . .81  
Voice Dial Tag Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Erasing All Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .82  
Managing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Recording Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Recording Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83  
Reviewing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84  
Erasing Voice/Call Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84  
Voice Memo Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85  
Setting the Recording Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86  
Setting the Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86  
Setting the Audio Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86  
Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87  
Activating Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87  
Selecting an Announcement for Screen Call . . . . . . . . . . . . . . . . . . . . . . . . .87  
Recording Name for a Pre-Recorded Announcement . . . . . . . . . . . . . . . .87  
Recording a Customized Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . .88  
Reviewing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88  
Erasing an Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88  
10. 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
Starting 10-4 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
Setting 10-4 Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
10-4 Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89  
Making and Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90  
Displaying the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90  
Selecting a Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .90  
Making a 10-4 Call (1-to-1 Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91  
Making a 10-4 Call (Group Call) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92  
Making a 10-4 Call by Entering a Number . . . . . . . . . . . . . . . . . . . . . . . . . . .92  
Making a 10-4 Call Using the Call List Key . . . . . . . . . . . . . . . . . . . . . . . . . . .93  
Missed Call Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93  
Receiving a 10-4 Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94  
10-4 Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95  
Adding and Editing 10-4 Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96  
Copying an Entry to your Personal List , Personal Group List, or  
Contacts List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96  
Saving a 10-4 Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96  
Finding an Entry in the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97  
Adding a New Contacts Entry to Your Personal List . . . . . . . . . . . . . . . . . .97  
Adding a New Group to Your Personal Group List . . . . . . . . . . . . . . . . . . .98  
Editing a Contacts Entry in Your Personal List . . . . . . . . . . . . . . . . . . . . . . .99  
Editing a Group in Your Personal Group List . . . . . . . . . . . . . . . . . . . . . . . .99  
Erasing 10-4 List Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100  
Erasing an Entry in Your Personal List or Personal Group List . . . . . . . .100  
Erasing a 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100  
Updating the Company List and Personal List . . . . . . . . . . . . . . . . . . . . . . .101  
Managing 10-4 Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101  
Setting Speed Dialing for 10-4 Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101  
Setting 10-4 Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Setting Ringer Types for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Setting the Ringer Volume for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Setting a Vibrate Pattern for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102  
Setting an Alert Notification for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . .103  
Setting the Speakerphone for 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . . .103  
Selecting the Default View of the 10-4 List . . . . . . . . . . . . . . . . . . . . . . . . .103  
Setting the Floor Display of the 10-4 Calls . . . . . . . . . . . . . . . . . . . . . . . . . .103  
11. Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104  
New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104  
Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104  
Sending a Text Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .105  
Creating Folders for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .106  
Erasing Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107  
Erasing Selected Messages in All Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . .107  
®
12. Using Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Accessing the Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Turning Bluetooth On and Off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Bluetooth Status Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108  
Using the Bluetooth Settings Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Bluetooth Settings: Visibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Bluetooth Settings: Voice Priority . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109  
Bluetooth Settings: My Device Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110  
Bluetooth Settings: My Device Information . . . . . . . . . . . . . . . . . . . . . . . .110  
Setting Auto-Accept . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .110  
Bluetooth Profiles . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111  
Pairing Bluetooth Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112  
Paired Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112  
Waiting for Request . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .112  
Using the Trusted Devices Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113  
Printing Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114  
Sending Data via Bluetooth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .115  
13. Service Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116  
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116  
Voicemail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116  
New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116  
Displaying Voicemail Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116  
Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117  
Clearing the Message Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117  
Editing Your Voicemail Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .117  
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118  
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .118  
Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119  
Launching the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119  
Net Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119  
Browsing the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .119  
Downloading through the Wireless Web . . . . . . . . . . . . . . . . . . . . . . . . . . . .122  
Using Application Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122  
14. Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123  
Maintaining Your Phone’s Peak Performance . . . . . . . . . . . . . . . . . . . . . . . .123  
Using Your Phone While Driving . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123  
Following Safety Guidelines . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123  
Using Your Phone Near Other Electronic Devices . . . . . . . . . . . . . . . . . . .124  
Turning Off Your Phone Before Flying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124  
Turning Off Your Phone in Dangerous Areas . . . . . . . . . . . . . . . . . . . . . . . .125  
Restricting Children’s Access to Your Phone . . . . . . . . . . . . . . . . . . . . . . . .126  
Protecting Your Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .126  
Disposal of Lithium Ion (Li-Ion) Batteries . . . . . . . . . . . . . . . . . . . . . . . . . . .127  
Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .127  
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129  
SCP-7050  
User Guide  
1
1. The Basics  
Front View of Your Phone  
1. Earpiece  
19. Battery Strength  
Indicator  
2. Signal Strength  
Indicator  
3. Main LCD (display)  
4. Navigation Key  
5. Softkey (left)  
18. Softkey (right)  
17. Side Call Key  
16. BACK Key  
6. MENU/OK Key  
7. WEB Key  
8. TALK Key  
15. Call List Key  
14. END/POWER Key  
9. SPEAKER Key  
13. Keypad  
10. Microphone  
11. Accessory Jack  
12. Charger Jack  
23. Antenna  
20. LED  
Indicator  
24. Headset Jack  
25. 10-4 Key  
21. Speaker  
22. Sub LCD  
26. Side Volume Key  
2
KeyFeatures  
1. Earpiece lets you hear the caller and automated prompts.  
2. SignalStrengthIndicator represents the signal strength by  
displaying bars. The more bars displayed, the better the signal  
strength.  
3. MainLCD(display) displays all the information needed to  
operate your phone, such as the call status, the Contacts list,  
the date and time, and the signal and battery strength.  
4. NavigationKey lets you navigate quickly and easily through the  
menu options. These keys can also be reassigned to create  
customized shortcuts. Default settings are: Right: Contacts,  
Left: My Favourites, Up: Send Text, and Down: My Content.  
5. Softkey(left) lets you select the menu corresponding to the  
bottom left line on the Main LCD.  
6. MENU/OKKey lets you access the phone’s menus and select  
menu options.  
7. WEBKey lets you launch the Web browser.  
8. TALKKey lets you place or receive calls, answer Call Waiting,  
use Three-Way Calling, or activate Voice Dial.  
9. SPEAKERKey lets you place or receive calls in speakerphone  
mode.  
10. Microphone allows other callers to hear you clearly when you  
are speaking to them.  
11. AccessoryJack allows you to connect a USB cable (not  
included). CAUTION! Inserting an accessory into the incorrect  
jack may damage the phone.  
12. ChargerJack connects the phone to the phone charger  
(included).  
13. Keypad lets you enter numbers, letters, and characters, and  
navigate within menus. Press and hold keys 2-9 for speed  
dialing.  
14. END/POWERKey lets you turn the phone on/off, end a call, or  
return to standby mode. While in the main menu, it returns  
the phone to standby mode and cancels your input. When you  
receive an incoming call, press to enter silent mode and mute  
the ringer.  
3
15. CallListKey displays the Recent Calls list if the phone is closed.  
16. BACKKey lets you display the previous page or clear characters  
from the screen.  
17. SideCallKey lets you place calls without opening the phone.  
Press and hold to make a voice dial or to redial with the phone  
closed.  
18. Softkey(right) lets you select the menu corresponding to the  
bottom right line on the Main LCD.  
19. BatteryStrengthIndicator represents the amount of remaining  
battery charge currently available in your phone. When all  
bars are displayed in the battery icon, the phone’s battery is  
fully charged. When no bars are displayed, the phone’s  
battery is completely discharged.  
20. LEDIndicator shows your phone’s connection status at a glance.  
21. Speaker lets you hear different ringers and sounds. You can  
mute the ringer when receiving incoming calls by pressing  
,
, or any of the side keys. The speaker also lets you  
hear the caller’s voice in speakerphone mode.  
22. SubLCD lets you monitor the phone’s status and see who’s  
calling without opening the phone.  
23. Antenna delivers the best reception when fully extended.  
24. HeadsetJack allows you to plug in an optional monaural  
headset for convenient, hands-free conversations.  
CAUTION! Inserting an accessory into the incorrect jack may  
damage the phone.  
25. 10-4Key allows you to access 10-4 List. (See “10-4”on page 89.)  
26. SideVolumeKey allows you to adjust the ringer volume in  
standby mode (with the phone open) or adjust the voice  
volume during a call. To mute the ringer during an incoming  
call, press the volume key up or down. The volume key can  
also be used to scroll up or down to navigate through the  
different menu options.  
4
Viewing the Display Screen  
Thislistidentifiesthesymbolsyou’llseeonyourdisplayscreen.  
shows your current signal strength. The more lines you  
have, the stronger your signal.  
means your phone cannot find a signal.  
indicates the call is on hold.  
indicates a call is in progress.  
indicates the 10-4 service is available.  
indicates the 10-4 service is unavailable.  
indicates the 10-4 service is enabled and the  
speakerphone mode is set to on.  
indicates you have missed 10-4 calls.  
indicates 1X Data/10-4 access is dormant. (Voice calls  
can still be made or received.)  
indicates 1X Data/10-4 access is active.  
indicates 1X Data/10-4 access is disabled.  
indicates 1X Service is available.  
indicates you are off the home network.  
indicates you have missed voice calls.  
indicates you have scheduled events or call alarms.  
indicates you have alarm clock and/or countdown  
notifications.  
indicates you have new text messages or Web Alerts  
waiting.  
indicates you have new picture messages.  
indicates you have new voicemail messages.  
indicates you have urgent messages.  
indicates you have two or more different types of missed  
alerts (missed voice calls and other missed alarm clocks,  
call alarms, or scheduled events).  
indicates the Bluetooth feature is enabled (blue icon).  
5
indicates the handset is connected to a Bluetooth device  
(green icon).  
indicates the handset is discoverable by another  
Bluetooth device.  
indicates the handset is communicating with a Bluetooth  
device.  
indicates your access to a secure site.  
shows the level of your battery charge. The more black  
you see, the more power you have left. (The icon is  
animated while the battery is charging.)  
indicates your battery is charging in “Power Off” state.  
indicates all the sound settings (except for applications)  
are off and the vibrate feature is set.  
indicates volume level 1 to 8 and vibrate feature are set.  
indicates 1-beep feature is set.  
indicates 1-beep and vibrate feature are set.  
indicates all ringer settings are off.  
indicates all ringer settings are off and the vibrate feature  
is set.  
indicates all the sound settings are OFF.  
indicates the Location Service of your phone is enabled.  
indicates the Location Service of your phone is disabled.  
indicates you have a new voice message when Screen  
Call is activated.  
indicates the Screen Call auto setting is enabled.  
indicates the Alarm Clock and/or Countdown is set.  
indicates your phone is in TTY mode.  
indicates the speakerphone mode is set to on.  
indicates a call is in progress using the Bluetooth device.  
indicates the wired Car Kit device is set to on.  
indicates the wired Headset device is set to on.  
indicates you have an alert about Java applications.  
6
Turning Your Phone ON and OFF  
Turning Your Phone ON  
Press  
.
Once your phone is on, it displays “Looking for service...” which  
indicates that your phone is searching for a signal. When your  
phone finds a signal, it automatically enters standby mode. At  
this point, you are ready to begin making and receiving calls.  
If your phone is unable to find a signal after 15 minutes of  
searching, a Power Save feature is automatically activated.  
When a signal is found, your phone automatically returns to  
standby mode.  
In Power Save mode, your phone searches for a signal  
periodically without your intervention. You can also initiate a  
search for service by pressing any key (when your phone is  
turned on).  
Tip: The Power Save feature helps to save your battery power when you  
are in an area where there is no signal.  
Turning Your Phone OFF  
Press and hold  
for two seconds until you see the  
powering down animation on the display screen.  
Your screen remains blank while your phone is off (unless the  
battery is charging).  
7
Using the Battery  
Installing the Battery  
1. Insert the battery into the opening on the back of the phone  
and gently press it down.  
2. Place the battery cover, and then slide it upward until you  
hear it snap into place.  
3. Slide the battery cover release lever as indicated in the  
diagram shown below.  
Removing the Battery  
Warning! Do not handle a damaged or leaking Li-Ion battery as you can  
be burned.  
1. Make sure the power is off so that you don’t lose any stored  
numbers or messages.  
2. Slide the battery cover release lever as indicated in the  
diagram shown below and slide the battery cover downward  
and remove it.  
3. Use your thumbnail to lift and then remove the battery as  
indicated in the diagram.  
8
Charging the Battery  
Your phone comes with a rechargeable battery. You should  
charge the battery as soon as possible so you can begin using  
your phone.  
Keeping track of your battery’s charge is important. If your  
battery level becomes too low, your phone automatically turns  
off and you will lose all the information you were just working  
on. For a quick check of your phone’s battery level, glance at the  
battery charge indicator located in the upper-right corner of  
your phone’s display screen. If the battery charge is getting too  
low, the battery icon  
warning message.  
appears and the phone displays a  
Always use an approved travel charger or vehicle power adapter  
to charge your battery.  
Warning! Using the wrong battery charger could cause damage to your  
phone and void the warranty.  
Note: Long backlight settings, searching for service, vibrate mode, and  
browser use affect the battery’s talk and standby times.  
Using the Phone Charger  
1. Plug the charger into a wall outlet.  
2. Plug the other end of the charger into the charger jack at the  
bottom of your phone (with the battery installed).  
9
Using the Holster  
Attaching the phone to the holster  
1. With the front of the phone facing the holster, insert the  
bottom of the phone into the holster.  
2. Press the phone down into the holster until it snaps into  
place.  
10  
Removing the phone from the holster  
1. With your forefinger, push against the holster’s top plate  
while gripping the phone at the sides.  
2. The phone can now be easily removed from the holster.  
11  
Navigating Through Phone Menus  
The navigation key on your phone allows you to scroll through  
menus quickly and easily. The scroll bar at the right of the menu  
keeps track of your position in the menu at all times.  
To navigate through a menu, simply press the navigation key up  
or down. If you are in a first-level menu (after selecting an item  
in the main menu), you may also navigate to the next or previous  
first-level menu by pressing the navigation key right or left.  
For a diagram of your phone’s menu, please see “Menu  
Navigation”on page 56.  
Selecting Menu Items  
As you navigate through the menu, menu options are highlighted.  
Select any numbered option by simply pressing the  
corresponding number on the phone’s keypad. You may also  
select any item by highlighting it and pressing  
For example, if you want to view your last incoming call:  
1. Press to access the main menu.  
.
Note: You can select List View or Grid View for your phone’s menu style  
(see “Changing the Phone’s Menu Style” on page 34).  
2. Select CallHistory by highlighting it and pressing  
or by  
pressing  
(when in List View).  
3. Select Incoming by pressing  
or by highlighting it and  
pressing . (If you have received any calls, they are displayed  
on the screen.)  
Note: For the purposes of this guide, the above steps condense into  
“Select  
> Call History > Incoming.”  
12  
Displaying Your Phone Number  
Select  
>Settings>PhoneInfo>MyPhone#. (Your phone  
number and other information about your phone and account  
will be displayed.)  
Tip: You can also display your phone number through the Contacts menu.  
Select  
> Contacts > My Name Card. To send your contact information  
using Bluetooth, press  
(right softkey) > Send via Bluetooth.  
Options  
Making and Answering Calls  
Making Calls  
Toplaceacallwiththephoneopen:  
1. Make sure your phone is on.  
2. Enter a phone number from standby mode. (If you make a  
mistake while entering, press  
to erase one digit at a time.  
Press and hold  
to erase the entire number.)  
3. Press or  
.
4. When you’re finished, press  
or close the phone.  
Tip: You can also place calls from your phone by using speed dialing  
(page 23), and by using your Call History listings (page 58).  
To redial your most recent call (outgoing, incoming, or missed),  
press  
twice.  
IMPORTANT: To maximize performance when using your phone, extend  
the antenna before a call and do not touch the antenna during a call.  
Correct  
Incorrect  
13  
Toplaceacallwiththephoneclosed:  
1. Make sure your phone is on and the Side Key Guard feature is  
disabled. (See “Setting Side Key Guard” on page 49.)  
2. Press and hold Side Call key (  
) on the right side of the  
phone.  
3. Follow the system prompts and say the name of your  
registered voice dial tag (see the note below).  
The call will be made in speakerphone mode unless you have a  
headset or other accessory attached to the phone.  
Note: To use a Voice Dial, you must have stored voice dial tags. (See  
“Using Voice-Activated Dialing” on page 81.)  
Toredialwiththephoneclosed:  
1. Press the Call List key (  
). Recent Calls list appears on the  
sub LCD.  
2. Use the Side Volume key (  
) to highlight a Call History  
entry you would like to redial.  
3. Press and hold  
.
Tip: To redial your most recent call, press and hold  
again.  
and press  
14  
Dialing Options  
Dialing options are displayed when you press  
(right  
Options  
softkey) after entering numbers in standby mode.  
Abbrev. Dial to use the Abbreviated Dialing feature. (See  
“Setting Abbreviated Dialing” on page 47 and “Using  
Abbreviated Dialing” on page 24.)  
Call to dial the phone number.  
Call:SpeakerOn to dial the phone number in speakerphone  
mode.  
SendMessage to send a text message (see page 105).  
SavePhone# to save the phone number in your Contacts. (See  
“Saving a Phone Number” on page 21.)  
Find to display Contacts entries that end with the digits you  
entered. (See “Finding a Phone Number” on page 21.)  
P HardPause to insert a hard pause. (See “Dialing and Saving  
Phone Numbers With Pauses” on page 22.)  
T 2-Sec. Pause to insert a 2-second pause. (See “Dialing and  
Saving Phone Numbers With Pauses” on page 22.)  
Hyphen to insert a hyphen manually where you like.  
15  
Answering Calls  
Toansweranincomingcallwiththephoneopen:  
1. Make sure your phone is on. (If your phone is off, incoming  
calls go to voicemail.)  
2. Press  
or  
to answer an incoming call. (Depending  
on your phone’s settings, you may also answer incoming calls  
by pressing any number key. See “Setting Any Key Answer” on  
page 45 for more information.)  
Toansweranincomingcallwiththephoneclosed:  
1. Make sure your phone is on. (If your phone is off, incoming  
calls go to voicemail.)  
2. When your phone rings or vibrates, press and hold  
right side of the phone. (The call will be answered in  
speakerphone mode.)  
on the  
– or –  
Open the phone to use the earpiece.  
Note: If the Open menu of the Open/Close Flip feature is set to  
No Action, opening the phone will not answer the call. (See “Setting the  
Open/Close Flip Option” on page 46.)  
Your phone notifies you of incoming calls in the following ways:  
The phone rings and/or vibrates.  
The LED flashes.  
The backlight illuminates.  
The screen displays an incoming call message.  
If available, the phone number of the caller is displayed.  
If the phone number is in your Contacts, the Contacts entry’s  
name is displayed.  
The following options are also displayed by pressing  
(right softkey).  
Options  
Note: If you set the Open menu of the Open/Close Flip feature to  
Answer Call, and if you open the phone when you receive a call, the  
options below are not available.  
Answer to answer the call.  
Answer:Speaker to answer the call in speakerphone mode.  
16  
SelectAudio to switch the call to your desired device (if  
available).  
AnsweronHold to put the call on hold. (See “Setting Answer  
on Hold” shown below.)  
ScreenCall to answer the call by using pre-recorded  
announcement. (See “Setting Up Screen Call” on page 87.)  
QuietRinger to mute the ringer. (This feature appears when  
the ringer is set.)  
Tip: Your phone offers additional ways to answer calls. (See page 45 for  
Any Key Answer and for Auto Answer.)  
SettingAnsweronHold  
This feature allows you to hold an incoming call when you  
cannot answer immediately.  
TosetAnsweronHold:  
Options  
1. When you receive an incoming call, press  
(right  
softkey).  
2. Select AnsweronHold. (The caller hears a message while  
waiting for you to answer. will display on the screen while  
the call is on hold.)  
Toresumethecall:  
Answer  
Press  
– or –  
Press  
(left softkey) or  
.
Options  
(right softkey), select Answer or Answer:Speaker.  
EndingaCall  
Close the phone or press  
.
Note: If the Close menu of the Open/Close Flip feature is not set to End,  
closing the phone will not end the call. (See “Setting the Open/Close Flip  
Option” on page 46.)  
17  
Missed Call Notification  
When an incoming call is not answered, the missed call log is  
displayed on your screen.  
Tocallthemissedcallentryfromthenotificationscreen:  
Call  
Press  
(left softkey).  
Tip: If you have two or more notifications, the Missed Alerts list will  
appear.  
TodisplaytheMissedAlertslistfromstandbymode:  
1. Select  
>MissedAlerts.  
2. Select the entry you wish to view and press  
.
Calling Emergency Numbers  
WXYZ  
You can place calls to 911 (dial  
and press  
),  
even if your phone is locked or your account is restricted. Once  
Options  
the connection is established, press  
display 911 options:  
(right softkey) to  
SpeakerOn to activate speakerphone mode. (If you are in  
speakerphone mode, the option will appear as SpeakerOff to  
deactivate.)  
UnlockPhone to unlock your phone (appears only if the phone  
is locked).  
CloseMenu to close the pop-up menu (appears only if the  
phone is unlocked).  
My Phone  
emergency call.  
Tip: Press  
(left softkey) to display your phone number during  
Emergencymodeoptions:  
If you end the emergency call by pressing  
, the phone  
Options  
enters the Emergency mode. Press  
(right softkey) to  
display the Emergency mode options:  
Call911 to call 911 again.  
Call911:Speaker to call 911 in speakerphone mode.  
ExitEmergency to exit Emergency mode.  
Note: Emergency mode automatically times out after 5 minutes.  
18  
In-Call Options  
During a call, your phone displays menu options by pressing  
Options  
(right softkey).  
Flash to answer an incoming call while putting the current call  
in Call Waiting or connect a third party for a Three-Way Call.  
Mute or Unmuteto mute or reactivate your phone’s  
microphone.  
TransferAudio to switch the call to your desired device (if  
applicable).  
SpeakerOn or SpeakerOff to activate or deactivate  
speakerphone mode.  
SpeakerOn to route the phone’s audio through the  
speaker. (You can adjust the speaker volume using  
.)  
SpeakerOff to use the phone’s earpiece.  
Warning! Due to higher volume levels, do not place the phone near your  
ear during speakerphone use.  
Three-WayCall to call a third party.  
MissedAlerts to display missed notifications.  
CallHistory to access the Call History menu. (See “Managing  
Call History” on page 58.)  
Contacts to access the Contacts menu. (See “Using Contacts”  
on page 61.)  
Messaging to access the Messaging menu. (See “Messaging”  
on page 104.)  
Calendar to access the Calendar menu. (See “Using Your  
Phone’s Calendar” on page 69.)  
Tools to access the Tools menu. (See “Using Your Phone’s  
Tools” on page 77.)  
Settings to access the Settings menu. (See “Your Phone’s  
Settings” on page 29.)  
Note: Flash appears only in Call Waiting and in Three-Way Calling. Mute  
does not appear during a 911 call.  
During a call, both the left softkey and  
function as a mute  
key. Press either one to mute the phone’s microphone for  
privacy. Press it again to unmute the phone.  
19  
End-of-Call Options  
Options  
To display the following options, press  
(right softkey)  
within 10 seconds after disconnecting a call.  
CallAgain to dial the phone number.  
Call:Speaker On to dial the phone number in speakerphone  
mode.  
SendMessage to send a text message.  
SavePhone# to save the phone number in your Contacts.  
GotoPhoneBook appears when the number is already in  
your Contacts. (See “Saving a Phone Number” on  
page 21.)  
Rename to change the current entry’s name to the Caller ID  
name (if applicable).  
Note: The End-of-Call options are not displayed for calls identified as  
No ID or Restricted.  
Send Msg  
Tip: You can also choose to send a message by pressing  
softkey).  
(left  
20  
Saving a Phone Number  
Your phone can store up to seven phone numbers in each of  
500 Contact entries with up to 700 total numbers. Each entry’s  
name can contain 32 characters. Your phone automatically sorts  
the Contacts alphabetically. (For more information, see “Using  
Contacts” on page 61.)  
Options  
1. Enter a phone number and press  
(right softkey) >  
SavePhone#.  
2. Select NewName or FromPh. Book.  
NewName to create a new Contacts entry for the  
number.  
FromPh. Book to save the number to an existing entry.  
(This step is not necessary on the very first entry in your  
Contacts.)  
3. Select a label and press  
.
4. Enter a name for the new entry using the keypad and press  
.
– or –  
Search for an existing contact name and press  
new number.  
to save the  
Save  
Done  
(left softkey).  
5. Press  
(left softkey) >  
Finding a Phone Number  
You can search Contacts entries for phone numbers that contain  
a specific string of numbers.  
1. Enter the last four or more digits of the number in standby  
mode. (The more numbers you enter, the more specific the  
search becomes.)  
Options  
2. Press  
(right softkey) >Find. (The Contacts entry  
matching the entered numbers will be displayed.)  
3. Highlight your desired entry.  
Press  
Press  
to display the entry details.  
or to dial.  
21  
Dialing and Saving Phone Numbers With Pauses  
You can dial or save phone numbers with pauses for use with  
automated systems, such as voicemail or credit card billing  
numbers.  
There are two types of pauses available on your phone:  
HardPause to send the next set of numbers when you press  
.
2-Sec. Pause toautomatically send the next set of numbers  
after two seconds.  
Note: You can have multiple pauses in a phone number and combine  
2-second and hard pauses.  
Options  
1. Enter the phone number and press  
(right softkey).  
2. Select either HardPause or 2-Sec. Pause. Hard Pause is  
displayed as a “P” and 2-second pause as a “T”.  
3. Enter additional numbers.  
4. To dial the number, press  
or  
. (When dialing a  
number with a hard pause, press  
to send the next set of  
numbers.)  
– or –  
Options  
To save the number in your Contacts, press  
softkey) > SavePhone#.  
(right  
Note: The use of Hard Pause or 2-Sec. Pause will disengage the ability  
to adjust the volume level of the call using  
.
22  
Dialing From the Contacts List  
1. Select  
2. Select the entry you want to call and press  
3. Highlight the number you wish to call and press  
>Contacts>Find/AddEntry.  
.
.
Note: The icon next to each entry represents the labels (for example,  
Mobile, Home, Work, etc.) of the entry’s default phone number. A triangle  
next to the icon means there are other phone numbers for the entry.  
Press the navigation key right or left to select other number.  
Using Speed Dialing  
With this feature, you can dial your favourite entries using one  
key press for locations 2-9. (See “Assigning Speed Dial Numbers”  
on page 66.)  
Tousespeeddial:  
From standby mode, press and hold the appropriate key for  
approximately two seconds.  
– or –  
From standby mode, press the appropriate key and press  
or  
.
The display confirms that the number has been dialed when it  
shows “Connecting...”.  
23  
Using Abbreviated Dialing  
Abbreviated Dialing is similar to speed dialing. You can use  
either of the following abbreviated dialing features.  
Ph. BookMatch to retrieve any desired number saved in your  
Contacts by entering only the last three to six digits of the  
number. This feature becomes available when you enable  
Abbreviated Dialing feature. (See “Setting Abbreviated  
Dialing” on page 47.)  
Prepend to predefine the first five- or six-digit prefix you wish  
to use for abbreviated dialing, so that you can dial a number by  
entering only the last four or five digits of the number. This  
feature becomes available when you enable Abbreviated  
Dialing feature. (See “Setting Abbreviated Dialing” on  
page 47.)  
ToplaceacallusingPh.BookMatchabbreviateddialing:  
1. Enter the last 3-6 digits of a Contacts entry’s phone number  
saved in your Contacts.  
2. Press  
or  
.
ToplaceacallusingPrependabbreviateddialing:  
1. Enter the last four or five digits of your desired number.  
2. Press  
or  
.
Note: If the digits match more than one entry, the Abbrev. Dial list will  
be displayed; select the correct entry and press again.  
When Prepend is set to Enable and Ph. Book Match is set to  
Disable, you can display the 10-digit number (including the  
predefined prepend number) by entering the last four or five digits  
of the number.  
When both Ph. Book Match and Prepend are set to Enable and  
your desired number is not saved in Contacts, you can display  
the 10-digit number (including the five- or six-digit prepend  
number) by entering the last four or five digits of the number.  
Options  
Tip: You can also place a call by pressing  
select Abbrev. Dial after step 1 above.  
(right softkey) and  
24  
Entering Text  
Selecting a Character Input Mode  
Your phone provides convenient ways to enter words, letters,  
punctuation, and numbers whenever you are prompted to enter  
text (for example, when adding a Contacts entry or when  
sending text messages).  
1. When you display a screen where you can enter text,  
Mode  
press  
(right softkey).  
2. Select a character input mode and press  
.
Note: The menus displayed vary according to the entry field. If you see  
triangles on the right of the menu, you can press the right and left  
navigation keys to switch between related menus.  
Alphabet to enter characters by using the keypad (see  
page 27).  
T9Word to enter characters using T9 Text Input (see  
page 26).  
SYMBOL to enter symbols.  
SMILEYS to enter smiley pictures.  
Emoticons to enter an emotion icon.  
WebShortcuts to enter web shortcuts (for example,  
www., http://, or, .com).  
CannedMessages to enter canned messages (see page 40).  
RecentMessages to enter messages used recently (if  
applicable).  
PasteList to paste copied or cut text (if applicable).  
Fr. ScheduleListto use words you added in your Calendar  
as Schedule (see page 70).  
FromToDoListtousewordsyouaddedinyourCalendaras  
To Do (see page 72).  
NUMBER to enter numbers.  
Signature to enter your signature (see page 41).  
SelectLanguage to select the language (English or French).  
EraseAll to erase all text (if applicable).  
25  
SelectText to select stored text for copying or cutting.  
AddWord to store words that you use frequently.  
Shift  
Tip: Before entering text, press the  
key to change letter capitalization  
: Abc > ABC > abc (Alphabet Mode)  
: T9w > T9W > t9w (T9 Text Input Mode).  
Entering Characters Using T9 Text Input  
T9 Text Input lets you enter text in your phone by pressing keys  
just once per letter. (To select the T9Word mode when entering  
text, see “Selecting a Character Input Mode” on page 25.)  
T9 Text Input analyses the letters you enter using an intuitive  
word database and creates a suitable word. (The word may  
change as you type.) To accept a word and insert a space,  
Space  
press  
or  
.
Tip: In order to insert a space by pressing , Auto-Space must be on  
(see page 45).  
If you make a mistake, press  
to erase a single character. Press  
and hold  
to delete an entire entry.  
AddingaWordtotheT9Database  
If a word you want to enter does not display as an option when  
you are using T9 Text Input, you can add it to the database.  
ToaddawordtotheT9TextInputdatabase:  
Mode  
1. Press  
(right softkey) >AddWord.  
Save  
2. Enter the word using Alphabet Mode and press  
(left  
softkey).  
Toeditorerasethewordsyouhaveadded:  
Mode  
1. Press  
(right softkey) >TextOptions>MyWords.  
– or –  
From standby mode, select  
>Settings>Others>TextEntry>  
MyWords.  
Options  
2. Highlight your desired word and press  
(right softkey).  
3. Select an option and press  
.
Edit to edit a word in My Words.  
Erase to erase a word in My Words.  
26  
CustomizingtheT9Settings  
Mode  
1. Press  
(right softkey) >TextOptions>T9Settings.  
– or –  
From standby mode, select  
>Settings>Others>TextEntry>  
T9Settings.  
2. Select an option and press  
.
NextWordPredictionto automatically display the word  
that may follow the current text input.  
Word Completion to show the completed words that match  
the keys you’ve entered without entering the whole word.  
WordScanto allow T9 text input to recognize words by  
searching Phone Book and messages.  
WordChoiceList to display word choice list.  
Showafterenter to select digits number (1-3 digits) to  
display the words choice list. The word choice list will  
display based on the number of digits you selected.  
Showafterwait to select how many seconds the phone  
should wait to display the word choice list.  
For more information about T9 Text Input, visit the Tegic Web  
site at www. T9. com.  
Entering Characters Using Alphabet Mode  
To enter characters using Alphabet mode, select the Alphabet  
mode (see “Selecting a Character Input Mode” on page 25).  
Press the corresponding key until the desired character appears.  
By default, the first letter of a word is capitalized and following  
letters are lowercased.  
27  
Charactersscrollinthefollowingorder:  
English Sequence  
Key  
Upper Case  
Lower Case  
. , @ 1 ? ! # /  
*
A B C 2  
a b c 2  
D E F 3  
G H I 4  
J K L 5  
M N O 6  
P Q R S 7  
T U V 8  
W XY Z 9  
0
d e f 3  
g h i 4  
j k l 5  
m n o 6  
p q r s 7  
t u v 8  
w x y z 9  
Space  
One-character-shifted Caps Lock Unshifted  
InFrenchmode, charactersscrollinthefollowingorder:  
French Sequence  
Key  
Upper Case  
Lower Case  
. , @ 1 ? ! # /  
*
A B C À Â Ç 2  
a b c à â ç 2  
D E F É È Ê Ë 3  
G H I Î Ï 4  
J K L 5  
d e f é è ê ë 3  
g h i î ï 4  
j k l 5  
M N O Ô 6  
P Q R S 7  
T U V Ù Û Ü 8  
W XY Z 9  
0
m n o ô 6  
p q r s 7  
t u v ù û ü 8  
w x y z 9  
Space  
One-character-shifted Caps Lock Unshifted  
See pages 25, 45 for changing French entry mode.  
After a character is entered, the cursor automatically advances to  
the next space after two seconds or when you enter a character  
not on the same key.  
Setting the Default Input Mode  
1. Select  
>Settings>Others>TextEntry>DefaultInput.  
2. Select an option and press  
.
T9 Word to select the T9 word mode for the initial entry  
mode.  
Alphabet to select the Alphabet mode for the initial entry  
mode.  
RetainMode to set the retain mode on to retain the  
previous entry mode.  
28  
2. Your Phones Settings  
Sound Settings  
Ringer Types  
SelectingRingerTypesforIncomingCalls  
Select a ringer type for incoming calls so that you can recognize  
when a certain type of call is coming in:  
Toselectaringertypeforincomingcalls:  
1. Select  
2. Select the field you want to edit (WithCallerID or NoCallerID)  
and press  
3. Select a ringer and press  
Toselectadistinctiveringerforincomingcallswhileroaming:  
1. Select > Settings > Sounds > RingerType > IncomingCalls.  
>Settings>Sounds>RingerType>IncomingCalls.  
.
.
2. Select Roaming > Distinctive. (Select Normal to deactivate this  
feature.)  
SelectingRingerTypesfor10-4Calls  
1. Select  
>Settings>Sounds>RingerType>10-4.  
2. Select the field you want to edit (10-4Calls, 10-4Missed, or  
10-4FloorTone) and press  
.
3. Select a ringer and press  
.
SelectingRingerTypesforVoicemailorCalendar/Alarm  
1. Select >Settings>Sounds>RingerType>Voicemailor  
Calendar/Alarm.  
2. Press , select a ringer, and press  
.
SelectingRingerTypesforMessaging  
1. Select  
2. Select the field you want to edit (Text, PicMessaging or  
WebAlerts) and press  
3. Press , select a ringer, and press  
>Settings>Sounds>RingerType>Messaging.  
.
.
29  
Adjusting the Phones Volume Settings  
Adjustingtheringervolume  
1. Select >Settings>Sounds>Volume>Ringer.  
Done  
2. Select a volume level and press  
(left softkey).  
Tip: You can adjust the ringer volume in standby mode (or the earpiece  
volume during a call) by using  
.
AdjustingtheAlertVolume  
This setting controls the alert volume for 10-4, Voicemail,  
Messaging, and Calendar/Alarm. You can set the alert volume  
separately from the ringer volume setting.  
1. Select >Settings>Sounds>Volume>AdvancedRinger.  
2. Select 10-4, Voicemail, Messaging, orCalendar/Alarm.  
3. Using the navigation key, select SeparateVol.  
Done  
4. Select a volume level, and press  
(left softkey).  
AdjustingthePhonesReceiverVolume  
1. Select >Settings>Sounds>Volume>Receiver.  
2. Select either Earpiece or Speaker.  
Done  
3. Select a volume level, and press  
(left softkey).  
AdjustingtheApplication, Start-up/Power-off, orKeyBeepVolume  
1. Select >Settings>Sounds>Volume.  
2. Select Application, Start-up/Pw-off, or KeyBeep.  
Done  
3. Select a volume level, and press  
(left softkey).  
30  
Selecting Vibrate Pattern  
With this feature, you can select vibrate pattern for incoming  
calls, messages, and schedule alarms.  
1. Select  
>Settings>Sounds>VibratePattern.  
2. Select IncomingCalls, 10-4 ,Voicemail, Messaging, or  
Calendar/Alarm. The following items require an additional  
step:  
IncomingCalls: select WithCallerID, NoCallerID, or  
Roaming.  
10-4: select 10-4Calls or 10-4Missed.  
Messaging: select Text, PicMessaging or WebAlerts.  
3. Select a vibrate pattern and press  
.
Selecting a Tone Length  
1. Select  
>Settings>Sounds>Others>ToneLength.  
2. Select Short or Long.  
Setting a Start-up/Power-off Tone  
1. Select  
>Settings>Sounds>Others.  
2. Select Start-upTone or Power-offTone.  
3. Select a tone, and press  
.
Using Voice Prompt  
This feature allows you to hear voice prompts Voice-activated  
dialing, when using Voice Memo, Screen Call setting, etc.  
(Default Setting is Off.)  
1. Select  
>Settings>Sounds>Others>VoicePrompt.  
2. Select On.  
Tip: When ringer volume is set to Silence All or Vibrate All, voice  
prompts cannot be heard.  
31  
Setting Up Key Press Echo  
With this feature, you can hear a voice say the numbers when  
you press the keypad. This feature is available when you are in  
standby mode.  
1. Select  
>Settings>Sounds>Others>KeyPressEcho.  
2. Select On or Off.  
Note: If the Key Beep is off, you are not able to change this setting. See  
“Adjusting the Application, Start-up/Power-off, or Key Beep Volume” on  
page 30.  
Alert Notification  
Your phone comes with several different options to keep you  
aware of whats going on by sounding the alert or ringer.  
Tosetthealerts:  
1. Select  
>Settings>Sounds>Alerts.  
2. Select an option and press  
.
Service to set alert on or off for network services  
parameter changes.  
10-4 to set an alert to notify you of 10-4 calls.  
10-4Calls to notify of incoming 10-4 calls.  
10-4Missed to notify of missed 10-4 calls.  
HeadsetAlert to tell if you have the floor using a  
headset.  
FloorToneVol. to set the floor tone volume during a call.  
Voicemail to set an alert to notify you of voice message(s).  
Select RingerLength to set the ringer length of Voicemail  
notification.  
Messaging to set an alert to notify you of text, picture  
message or Web Alert. Select RingerLength to set the  
ringer length of Messaging notification.  
MinuteBeep to set a minute reminder that beeps ten  
seconds before the end of each minute during a call.  
SignalFade to set alert to notify you when your phone  
loses a signal during a call.  
32  
3. Select a setting and press  
.
Tip: You can select Once or Repeat Alert if you select 10-4 Calls, 10-4  
Missed, Voicemail or Messaging. Repeat Alert sounds an alert every two  
minutes for twenty minutes. (For 10-4 calls, an alert sounds for 20  
seconds continuously.)  
Silence All  
With the phone open, press and hold  
down in standby  
mode. (The screen will display Silence All.)  
To deactivate, with the phone open, press  
up  
repeatedly to select a volume level.  
Tip: When Ringer Volume is set as Silence All, you are not able to  
change the settings of Advanced Ringer, Application,  
Start-up/Pw-off or Key Beep. See “Adjusting the Application, Start-  
up/Power-off, or Key Beep Volume”on page 30.  
You can also select Vibrate All to set your phone to vibrate only.  
33  
Display Settings  
Changing the Phones Menu Style  
Your phone allows you to choose how the main menu appears  
on your display screen.  
Options  
(right softkey)>ChangeView.  
1. Select  
>
2. Select GridView or ListView.  
GridView to view each main menu item as an animated  
single-screen icon. You can select a menu by pressing a  
number key. Allocation of menu options corresponds to  
that of number keys on the keypad.  
ListView to view main menu as a list. Menu option is  
numbered and you can select it by pressing the  
corresponding number key on the key pad.  
Changing the Backlight Time Length  
Tochangethebacklightsetting:  
1. Select >Settings>Display>Backlight.  
2. Select MainLCD or SubLCD.  
3. Select AlwaysOn, DimOnly, or a preset length of time.  
Note: The Always On setting returns to the previous value the next time  
you turn on the phone.  
TochangetheKeypadbacklightsetting:  
1. Select >Settings>Display>Backlight>Key.  
2. Select AlwaysOff or a preset length of time.  
Note: Long backlight settings affect the phone’s talk and standby times.  
34  
Power Save Mode  
This feature helps conserve your battery power by setting the  
Main LCD and Sub LCD backlights to Dim Only,the Main LCD  
sleep mode to after 30 sec., and the Sub LCD sleep mode to  
after 5 sec.”  
1. Select >Settings>Display>PowerSaveMode.  
2. A message appears. Press  
(left softkey) to continue.  
OK  
3. Select On. (Select Off to deactivate this feature.)  
Changing the Greeting  
Todisplayorchangeyourcustomgreeting:  
1. Select >Settings>Display>Greeting>Custom.  
2. Enter a custom greeting using your keypad and press  
.
(See Entering Texton page 25.)  
Toselectthedefaultgreeting:  
Select >Settings>Display>Greeting>Default.  
Changing the Background  
1. Select  
>Settings>Display>Background.  
2. Select a background and press  
.
Changing the Display Screen Animation  
Your new phone offers animation for what you see on the  
display screen during various phone functions.  
1. Select >Settings>Display>Animation.  
2. Select Standby, OutgoingCalls, or ServiceSearch.  
(If you select Standby, then select Set.)  
3. Select an option (Preset, MyContent, -GetNew, or Off) and  
press  
.
For Standby, you can select Time to set the animation  
starting time.  
Preset is not available for Standby.  
4. Select an animation display and press  
.
35  
Changing the Display for Incoming Calls  
1. Select >Settings>Display>IncomingCalls.  
2. Select an option (Preset, MyContent, -GetNew, or Off) and  
press  
.
3. Select a color or image and press  
twice.  
Changing the Screen Saver  
Your new phone offers you the option of displaying a screen  
saver on the Main LCD while in standby mode.  
Tochangethescreensaver:  
1. Select  
2. Select an option (Preset, MyContent, GetNew, or Off) and  
press  
3. Select a screen saver and press  
>Settings>Display>ScreenSaver.  
.
twice.  
Changing the Clock/Calendar Display for Standby Mode  
Select from among a variety of items to be displayed in standby  
mode.  
Tosettheclock/calendardisplayforstandbymode:  
1. Select  
>Settings>Display>Clock/Calendar.  
2. Select MainLCD or SubLCD.  
3. Select a display option press  
twice.  
36  
Changing the Font Size  
1. Select  
>Settings>Display>Others>FontSize.  
2. Select View or Input.  
Viewto select MainLCD(and then, Messaging or Browser)  
or SubLCD(and then Names/Phone#s).  
Input to select Phone#s, Messaging or Others.  
3. Select a font size and press  
.
Preview  
Tip: You can see the preview of the display by pressing  
(right  
softkey). (For View menu only.)  
From the preview display, you can select a font size by pressing the  
navigation key right or left and press  
.
Setting Return to Standby Mode  
1. Select  
>Settings>Display>Others>ReturntoIdle.  
2. A message appears. Press  
(left softkey) to continue.  
OK  
3. Select Automatically or EndKey.  
Automatically to return to standby mode automatically  
when no key is pressed in 30 seconds.  
EndKey to return to standby mode by pressing  
.
Note: End Key setting affects the phone’s talk and standby times.  
37  
Sleep Mode  
This feature helps conserve your battery power by restricting  
the display.  
1. Select  
>Settings>Display>Others>SleepMode.  
2. Select MainLCD or SubLCD.  
3. Select an option and press  
.
To deactivate this feature, select Off.  
38  
Location Settings  
The settings allow you to turn the Assisted GPS chipset in the  
cell phone to Allowor Deny.Setting location to On lets the  
network detect the cell phones geographic location using  
Assisted GPS, making some features easier to use. Setting  
location to Off disables Assisted GPS, but some features may still  
detect the cell phones whereabouts using cell tower  
technology. Assisted GPS is automatically set to On when an  
emergency call is placed, then set back to Off when the call is  
completed.  
TosettheLocationMenutoALLOWorDENY:  
1. Select  
>Settings>Location>On/Off.  
2. Read the disclaimer and press  
(left softkey).  
OK  
3. Select On or Off.  
Tip: When the Location feature is on, your phone’s standby screen will  
display the  
displayed.  
icon. When Location is turned off, the  
icon will be  
You can send the log received from the GPS applications to  
other devices via Bluetooth or USB.  
TosendtheGPSlogtootherdevices:  
1. Select  
>Settings>Location>NMEAOutput.  
2. Select Bluetooth, USB, or Off.  
39  
Messaging Settings  
Setting Message Notification  
You can set your phone to display an icon and message  
notification or just display an icon notification when you receive  
a text message, picture message, voicemail, or Web Alert.  
1. Select  
>Settings>Messaging>Notification.  
2. Select MsgsandIcon or IconOnly.  
Tip: To access Messaging settings menu, you can also select  
Messaging > Settings.  
>
Setting Push Options  
Turning this feature on allows you to connect to a Web Alerts  
page automatically (if possible) when you receive a Web Alert.  
See page 105 for Web Alerts.  
1. Select  
>Settings>Messaging>PushOptions.  
2. Select Yes or No.  
Editing Canned Messages  
Your phone can store canned messages for use with text  
messaging. You can edit your phones default canned messages  
through the Settings menu.  
Toeditacannedmessage:  
1. Select  
>Settings>Messaging>CannedMsgs.(The list of  
canned messages is displayed.)  
2. Select the message you want to edit and press  
.
3. Use your keypad to edit the message and press  
(left  
OK  
softkey) or  
to save your changes.  
Options  
Note: To reset all messages, press  
(right softkey) >  
Reset All Msgs > Yes after step 1 above.  
40  
Tochangethelanguageofthecannedmessages:  
1. Select  
>Settings>Messaging>CannedMsgs.  
Options  
2. Press  
(right softkey)>SelectLanguage.  
3. Select English or French.  
Note: For information on editing text, see “Entering Text” on page 25.  
Setting Your Callback Number  
With this feature, you can send a callback number with your text  
message.  
1. Select  
>Settings>Messaging>Text>SendCallback#.  
2. Press , and then select an option and press  
.
None to send no callback number.  
MyPhone# to send your phone number.  
Other to send a defined number. To set a number, enter a  
phone number and press  
.
Done  
3. Press  
(left softkey).  
Setting Your Signature  
This feature allows you to send a text message with your  
signature.  
1. Select  
>Settings>Messaging>Text>Signature.  
2. Press , and then select On.  
3. Select Text and enter your signature and press  
(left softkey).  
OK  
Save  
4. Press  
(left softkey) to save your signature.  
Note: You can insert your signature even when your signature setting is  
Mode  
off. Press  
your message.  
(right softkey) and select Signature while composing  
41  
Setting Drafts Alert  
Drafts Alert sends you a reminder when you have unsent  
messages waiting in the drafts folder.  
1. Select  
>Settings>Messaging>Text>DraftsAlert.  
2. Select On.  
Airplane Mode  
When your phone is in Airplane mode, it cannot send or receive  
any calls (except for 911 dialing) or access online information.  
Youmaystillusethephonesotherfeatures, suchasvoicememo,  
calculator, calendar, etc., while you are in Airplane mode.  
1. Select  
>Settings>Others>AirplaneMode.  
2. Read the disclaimer and press  
or  
(left softkey).  
OK  
3. Select On or Off.  
Note: While in Airplane mode, your phone’s screen will display “Phone  
Off.”  
42  
TTY Use  
A TTY (also known as a TDD or Text Telephone) is a  
telecommunications device that allows people who are deaf or  
hard of hearing, or who have speech or language disabilities, to  
communicate via a telephone.  
Your phone is compatible with select TTY devices. Please check  
with the manufacturer of your TTY device to ensure that it  
supports digital wireless transmission. Your phone and TTY  
device will connect via a special cable that plugs into your  
phones headset jack. If this cable was not provided with your  
TTY device, contact your TTY device manufacturer to purchase  
the connector cable.  
1. Select  
>Settings>Others>TTY. (An informational message  
will be displayed.)  
2. Press or (left softkey) to continue.  
OK  
3. Select Enable or Disable.  
Note: When you connect TTY devices, your phone will display in  
TTY mode.  
If TTY mode is enabled, the audio quality of non-TTY devices  
connected to the headset jack may be impaired.  
IMPORTANT NOTICE: 911 Emergency Calling  
It is recommended that TTY users make emergency calls by other means  
including cellular and landline communications.  
43  
Phone Setup Options  
My Favourites  
Your phone offers you the option of assigning a shortcut to a  
favourite or often-used function. Pressing the navigation key left  
(by default) will launch your user-defined shortcut.  
Toassignyourshortcut:  
1. Press the navigation key left.  
2. Select <AddFavourite>.  
3. Select an option and press  
.
Contact to display stored Contacts entries.  
MyContent to display downloaded items stored in your  
phone.  
WebBookmark to display your bookmarked sites.  
MenuItem to assign an often-used menu item.  
4. Using the navigation key or your keypad, select an item to be  
assigned to the My Favourites list.  
5. Press  
(left softkey) to save if you select options other  
Assign  
than Contact.  
Toedittheshortcut:  
1. Press the navigation key left.  
2. Highlight your desired menu and press  
(right softkey).  
Options  
3. Select an option and press  
.
Replace to replace an existing shortcut.  
Remove to remove an existing shortcut.  
RemoveAll to remove all the existing shortcuts.  
Help to display the My Favourites list information.  
44  
Setting the Text Entry Options  
1. Select  
>Settings>Others>TextEntry.  
2. Select an option and press  
.
Auto-Capital to set the auto-capital on or off.  
MyWords to add a word to or edit a word in the T9  
database (see page 26).  
InputLanguage to select the language (English or French).  
DefaultInput to select T9word, Alphabet, or RetainMode for  
the initial entry mode. Set RetainMode to retain the  
previous entry mode (see page 28).  
Auto-Space to set the auto-space on or off after T9 words  
you enter.  
T9Settings to customize the T9 settings (see page 27).  
AddWord to store words that you use frequently  
(see page 26).  
Auto-Completeto automatically display words that may  
follow the current text input.  
Help to see the T9 instructions page.  
Setting Any Key Answer  
This feature allows you to answer incoming calls by pressing any  
key (except  
,
, softkeys, and sidekeys).  
1. Select  
>Settings>Others>AnyKeyAnswer.  
2. Select On or Off.  
Auto Answer Mode  
This feature sets the phone to automatically pick up incoming  
calls in speakerphone mode or hands-free mode (when  
connected).  
1. Select  
>Settings>Others>AutoAnswer.  
2. Select Hands-free or Speakerphone.  
3. Select 5Seconds, 10Seconds, or Off.  
45  
Setting the Open/Close Flip Option  
This feature enables you to answer an incoming call by opening  
the phone or to end a call by closing the phone.  
ToactivatetheOpenFlipfeature:  
1. Select  
>Settings>Others>Open/CloseFlip.  
2. Select Open.  
3. Select AnswerCall.  
To deactivate this feature, select NoAction.  
ToactivatetheCloseFlipfeature:  
1. From step 2 above, select Close. (You will see a message on  
the display.)  
2. Press  
(left softkey) to continue.  
OK  
3. Select an option and press  
.
End to end the call.  
Continue(Mute) to continue the call. Your voice is muted,  
however you can hear the callers voice from the speaker.  
Continue(Unmute) to continue the call. You can hear the  
callers voice and speak to the phone to answer.  
Note: The Close Flip feature does not apply while you are using the  
speakerphone, a headset, or a car kit.  
46  
Setting Abbreviated Dialing  
ToactivatePh.BookMatchfeature:  
1. Select  
>Settings>Others>Abbrev. Dial.  
2. Select Ph. BookMatch>Enable.  
To deactivate this feature, select Disable.  
Tosetyourprependnumber:  
1. Follow steps 1 above.  
2. Select Prepend>Enable.  
To deactivate this feature, select Disable.  
3. Select Prepend#.  
4. Enter a five- or six-digit number (for example, an area code  
and prefix) and press  
(left softkey).  
OK  
Tip: To make an Abbreviated Dial call, see “Using Abbreviated Dialing”  
on page 24.  
Note: This setting does not apply to 911 or Directory Assistance.  
Setting Power On to Alert  
Power On to Alert helps prevent unintentional or accidental  
power-on of your phones alarm settings while your phone is  
turned off. This feature applies only to Event Alerts, Call Alarm,  
and Alarm Clock. (The default setting is Off.)  
ToturnPowerOntoAlertonoroff:  
1. Select  
>Settings>Others>PowerOntoAlert.  
2. Select On or Off.  
On to activate alarm in Airplane Mode even if the phone is  
turned off.  
Off to deactivate all alarm settings while the phone is  
turned off.  
47  
Headset Mode  
This feature allows you hands-free phone use. Press the Turbo  
Button (the operation button) on the headset to activate useful  
functions.  
Toconnecttheheadset:  
Simply plug the headset into your phones headset jack.  
Tosetheadsetmode:  
1. Select  
>Settings>Others>HeadsetMode.  
2. Select TurboButton.  
3. Select an option and press  
:
VoiceCallsto use the Turbo Button to activate voice dial.  
Press twice to redial the last call. Press and hold to record  
a voice memo.  
10-4to use the Turbo Button to redial the last 10-4 call.  
Press and hold the Turbo Button.  
Off to disable a Turbo Button setting or if your headset  
does not have a Turbo Button.  
Tosettheringersound:  
1. Select  
>Settings>Others>HeadsetMode.  
2. Select RingerSound.  
3. Select Normal or HeadsetOnly.  
Setting Navigation Key Shortcuts  
You can use the navigation keys as shortcuts to access specific  
menu items directly from standby mode. With this feature, you  
can reassign the default shortcuts to the menu items you choose.  
Tosetthenavigationkeyshortcut:  
1. Select  
>Settings>Others>NavigationKeys.  
2. Select the navigation key you wish to reassign and press  
.
3. Using the navigation key or your keypad, select a function.  
4. Press  
(left softkey) to save.  
Assign  
48  
Setting Side Key Guard  
This feature enables you to lock the side keys while your phone  
is closed.  
1. Select  
>Settings>Others>SideKeyGuard.  
2. Select On or Off.  
Note: This feature does not apply when the phone is open.  
Tip: You can deactivate this feature temporarily by pressing and holding  
while the phone is closed. Note that the Side Key Guard will  
reactivate if the phone is left unoperated for approximately 30 seconds  
or if the phone is opened and re-closed.  
Changing the Menu Language  
1. Select  
>Settings>Others>Language.  
2. Select English or Français.  
49  
3. Security  
Accessing the Security Menu  
You must enter your lock code to view the Security menu.  
1. Select  
>Settings>Security.  
2. Enter your lock code.  
Tip: If you can’t recall your lock code, try using the last four digits of your  
phone number or 0000.  
Using Your Phones Lock Feature  
Locking Your Phone  
LockPhone automatically locks the keys. If you set Lock Phone,  
you must enter the lock code beforehand to make a call. In this  
way you can prevent other people from using your phone.  
However, even when your phone is locked, you can make calls  
to 911, Customer Service, and to special numbers without  
entering the lock code.  
1. From the Security Menu display (See Accessing the Security  
Menuabove), select LockPhone.  
2. Select LockNow or OnPower-up.  
LockNowto lock your phone now.  
OnPower-upto lock your phone the next time it is  
turned on.  
3. Select either FullLock or Exp. IncomingCalls.  
FullLock to restrict both outgoing and incoming calls.  
Exp. IncomingCalls to restrict outgoing calls while  
allowing incoming calls.  
50  
Unlocking Your Phone  
1. Press  
(left softkey).  
Unlock  
2. Enter your lock code.  
Changing the Lock Code  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Others>ChangeLock.  
2. Enter and re-enter a new lock code.  
Calling in Lock Mode  
You can place calls to 911, Customer Service, and to your special  
numbers even if your phone is locked. (See Locking Your  
Phoneon page 50.)  
To call an emergency number, special number, or Customer  
Service, enter the phone number and press  
. (For  
information on special numbers, see Using Special  
Numberson page 52.)  
Lock Services  
With this feature, you can choose to restrict access to the  
Internet, incoming and outgoing voice calls, 10-4 calls or  
Security settings.  
1. From the Security Menu display, select Others > LockServices.  
2. Select VoiceCalls, Internet,or 10-4.  
3. Select Locked.  
To deactivate this feature, select Unlocked.  
Note: If Voice Calls is locked, making and receiving calls are not  
available. (You can only make a call to 911.)  
51  
Restricting Calls  
You can restrict phone numbers your phone dials or receives.  
(LimitUse setting does not apply to 911 or Customer Service.)  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Others>LimitUse.  
2. Select OutgoingCalls or IncomingCalls.  
3. Select an option and press  
.
AllowAll to make or receive all calls.  
PhoneBookOnly to make or receive calls to or from  
Contacts entries, voicemail, or special numbers only.  
Special#sOnly to make or receive calls to or from three  
special numbers only. (You must register the numbers  
beforehand. See Using Special Numbersbelow.)  
Note: Restricted incoming calls are forwarded to voicemail.  
Using Special Numbers  
You can save three special numbers on your phone. You can  
make or receive calls to or from special numbers even when  
your phone is in LockPhone status.  
Toaddoreditaspecialnumber:  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Others>Special#s.  
2. Select a field to enter or edit the number and press  
3. Enter or edit the number and press  
.
.
Note: There are no speed dial options associated with special numbers.  
You cannot make calls to or receive calls from special numbers if  
Voice Calls is set to Locked in Lock Services.  
52  
Erasing Phone Content  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Erase/Reset.  
2. Select an option and press  
.
ErasePh. Book to erase all of your Contacts entries.  
EraseMyContent to erase all items you have downloaded  
to your phone.  
EraseVoiceData to erase all voice/call memos you have  
recorded.  
EraseVoiceTag to erase all voice dial tags you have  
recorded.  
EraseMessages to erase all text messages (including  
locked ones) in the Inbox, Sent Mail, Pending, Drafts  
folders, and your defined folders; all Recent Lists; and all  
user-created canned messages.  
EraseCal. Eventsto erase all scheduled events (including  
secret ones).  
3. Press  
(left softkey) to continue.  
OK  
4. If you are certain you would like to reset, select Yes.  
Resetting the Browser  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Erase/Reset>ResetBrowser.  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset, select Yes.  
53  
Resetting Favourites  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Erase/Reset>ResetFavourites.  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset, select Yes.  
Restoring Default Settings  
DefaultSettings restores all the factory defaults, including the  
ringer types and display settings. The Contacts, Call History,  
Calendar, and Messaging are not affected.  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Erase/Reset>DefaultSettings.  
2. Press  
(left softkey) to continue.  
OK  
3. If you are certain you would like to reset, select Yes.  
Resetting Your Phone  
Resetting the phone resets all settings and erases all data on your  
phone.  
1. From the Security Menu display (See Accessing the Security  
Menuon page 50), select Erase/Reset>ResetPhone.  
2. Read a disclaimer and press  
(left softkey) to continue.  
OK  
3. If youre sure you want to reset your phone, select Yes.  
54  
4. Roaming  
Understanding Roaming  
Recognizing Icons on the Display Screen  
Your phones display screen always lets you know when youre  
off the home network. Any time you are roaming, the phone  
displays the roaming icon (  
).  
Roaming on Other Networks  
When youre roaming, your call quality and security will be  
similar to the quality you receive when making calls on the  
home network. You may not be able to access certain features.  
Note: If you’re on a call when you leave the home network and enter an  
area where roaming is available, your call is dropped. If your call is  
dropped in an area where you think service is available, turn your phone  
off and on again to reconnect to the home network.  
Setting Your Phones Roam Mode  
Your phone allows you to control your ability to roam. By using  
the Roaming menu option, you can determine which signals your  
phone accepts.  
Tochoosefromtwodifferentsettingsonyourdualband/dual  
modephonetocontrolyourroamingexperience:  
1. Select  
>Settings>Others>Roaming.  
2. Select an option and press  
.
Automatic to seek Service. When Service is unavailable,  
the phone searches for an alternate system.  
HomeOnly to access the home network only and prevents  
roaming on other networks.  
55  
5. Menu Navigation  
Viewing the Menus  
Menu Diagram  
Menus let you check or change your phone settings. The  
following outline shows your phones menu structure.  
1. Missed Alerts  
6. Web  
7. Calendar  
8. Tools  
2. Call History  
1. Outgoing  
1. Voice Memo  
2. Bluetooth  
3. Alarm Clock  
4. Stop Watch  
5. Countdown  
6. World Clock  
7. Calculator  
9. Settings  
1. Sounds  
2. Display  
3. Internet  
4. 10-4  
5. Location  
6. Bluetooth  
7. Messaging  
8. Security  
9. Others  
2. Incoming  
3. Missed  
4. Recent Calls  
5. Erase History  
3. Contacts  
1. Find/Add Entry  
2. Group  
3. Speed Dial #s  
4. My Name Card  
5. Services  
4. Messaging  
1. Send Message  
2. Text  
3. Picture Msg  
4. Web Alerts  
5. Voicemail  
6. Settings  
0. Phone Info  
5. My Content  
Application Mgr.  
Games  
Ringers  
Screen Savers  
Applications  
Dynamic 1-11 (If applicable)  
Others (If applicable)  
56  
IN USE MENU  
Press  
(right softkey) to display the following options:  
Options  
1. Flash  
2. Mute/Unmute  
3. Speaker On/Speaker Off  
4. Three-Way Call  
5. Missed Alerts  
6. Call History  
7. Contacts  
8. Messaging  
9. Calendar  
10. Tools  
11. Settings  
57  
6. Managing Call History  
Viewing History  
Youll find the Call History feature very helpful. It is a list of the  
phone numbers (or Contacts entries) for calls you placed,  
accepted, or missed. Call History makes redialing a number fast  
and easy. It is continually updated as new numbers are added to  
the top of the list and the oldest entries are removed from the  
bottom of the list.  
1. Select  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Select the entry you wish to view and press  
>CallHistory.  
.
Note: Call History records only calls that occur while the phone is turned  
on. If a call is received while your phone is turned off, it will not be  
included in the phone’s Incoming or Missed call logs.  
Tip: The icons next to the name in the Recent Calls list represent the  
status of the call history:  
for outgoing calls,  
for Incoming calls, and  
for Missed calls.  
You can view Recent Calls with the phone closed by pressing  
Recent Calls shows up to the 60 most recent calls for both  
conventional and 10-4 calls.  
.
Call History Options  
For additional information and options on a particular call,  
highlight a Call History entry and press  
(right softkey).  
Options  
Call to dial the phone number.  
Call:SpeakerOn to dial the phone number in speakerphone  
mode.  
SendMessage to send a text message. See page 105 for details.  
SavePhone# to save the phone number (if applicable).  
GotoPhoneBook appears when the callers phone  
number is already saved in your Contacts. (See Saving a  
Phone Number From Call Historyon the page 60.)  
Renameto change the current entrys name to Caller ID name  
(if applicable).  
58  
Prepend to add numbers to the beginning of the phone  
number. (See Prepending a Phone Number From Call  
Historyon page 60.)  
CopytoPersonal to copy the phone number to the 10-4  
Personal List (appears only when 10-4 mode is set to Enable  
and the number does not match any stored entry in your  
Personal List).  
Erase to erase the entry.  
Tip: You can also view the next or previous Call History entry by pressing  
the navigation key right or left.  
Making a Call From Call History  
ToplaceacallfromCallHistory:  
1. Select  
>CallHistory.  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Select the Call History entry you want to call.  
4. Press  
or –  
or  
.
Press  
(right softkey), > Call or Call:SpeakerOn.  
Options  
ToplaceacallusingtheCallListkey:  
1. With the phone closed, press  
. Recent Calls list appears  
on the sub LCD.  
2. Use  
to select a Call History entry.  
3. Press and hold  
.
Note: You cannot make calls from Call History to entries identified as  
No ID or Restricted.  
59  
Saving a Phone Number From Call History  
1. Select  
>CallHistory.  
2. Select Outgoing, Incoming, Missed, or RecentCalls.  
3. Highlight the call history entry you want to save and press  
(right softkey) >SavePhone#.  
Options  
4. Select NewName or FromPh. Book to enter a name.  
NewName to create a new Contacts entry for the  
number.  
FromPh. Book to save the number to an existing entry.  
(This step is not necessary on the very first entry in your  
Contacts.)  
5. Select a label and press  
.
6. Enter a name for the new entry using the keypad and press  
.
or –  
Search for an existing contact name and press  
new number.  
to save the  
7. Press  
(left softkey).  
Save  
Note: You cannot save phone numbers from calls identified as No ID or  
Restricted.  
Prepending a Phone Number From Call History  
If you need to make a call from Call History and you happen to  
be outside your local area code, you can add the appropriate  
prepending by following these steps:  
1. Highlight your desired Call History entry and press  
Options  
(right softkey).  
2. Select Prepend.  
3. Enter the digits you want to add to the number.  
4. Press  
or  
to place a call.  
Erasing Call History  
1. Select  
>CallHistory>EraseHistory.  
2. Select Outgoing, Incoming, Missed, RecentCalls, or All.  
3. Select Yes.  
60  
7. Using Contacts  
Displaying the Contacts List  
Select  
>Contacts>Find/AddEntry.  
Adding a New Contacts Entry  
Your phone can store up to 500 Contacts entries. Contacts can  
store up to a total of 700 phone numbers and each entrys name  
can contain 32 characters.  
1. From the Contacts list display, select <AddContact>.  
2. Enter a name for the entry and press the navigation key down.  
Shortcut: Enter the phone number in standby mode and press  
Proceed with steps 2-5 in “Saving a Phone Number”on page 21.  
.
3. Enter the phone number and press  
4. Select a label for the entry (Mobile, Home, Work, Pager, Fax, or  
Other) and press  
5. Press (left softkey).  
.
.
Save  
Assigning a Group Entry  
Toaddagroupname:  
1. Select  
>Contacts>Group.  
2. Highlight an unnamed group and press  
(right softkey)  
Options  
> Edit.  
3. Enter the group name and press  
.
4. Scroll down to the Ringer or PictureID to assign a ringer type  
or image for a group entry.  
5. Press  
(left softkey) to save.  
Save  
61  
ToassignaContactsentrytoagroup:  
1. From the Contacts list display, select your desired Contacts  
entry and press  
.
2. Scroll down to the box next to the  
icon and press  
twice.  
(left  
3. Select a group from the Group list and press  
or  
Done  
softkey).  
4. Press  
(left softkey) to save.  
Save  
Toeraseagroupmember:  
1. Select >Contacts>Group.  
2. Select the group entry you want to erase members from and  
press  
.
3. Select the member you want to erase and press  
(right  
Options  
softkey) >Erase>This or All.  
4. Select Yes.  
Finding Contacts Entries  
There are several ways to display your Contacts entries:  
by name, by speed dial number, and by voice dial tags. Follow  
the steps outlined in the sections below to display entries from  
the Contacts menu.  
Finding Names  
TofindContactsentriesbyname:  
1. From the Contacts list display, scroll through all the entries  
using your navigation key.  
or –  
Enter the first letter or part of the persons name. (The more  
letters you enter, the more your search narrows.)  
2. To display the entrys details, select your desired entry and  
press  
.
TofindContactsentriesbyvoicedialtag:  
Note: To use this feature, you must have stored entries for voice dialing.  
See “Using Voice-Activated Dialing” on page 81.  
1. Press and hold  
on the right side of the phone.  
62  
2. Say the voice dial tag of the Contacts entry you would like to  
find. If the phone partly recognizes the name, a list of up to  
three most likely match names is displayed. You will hear the  
voice prompt Did you say…” followed by the matched name.  
Note: Your phone will automatically place a call if the voice dial tag is  
completely recognized.  
3. Say Yesif you confirm the name, or Noto change the  
selection.  
Finding Speed Dial Numbers  
Select  
>Contacts>SpeedDial#s.  
See Using Speed Dialingon page 23 for how to use speed  
dialing.  
Finding Group Entries  
Tofindentriesdesignatedaspartofagroup:  
1. Select  
>Contacts>Group.  
2. Scroll through the group entries using your navigation key. To  
display Contacts entries belonging to a group, select the  
group and press  
3. To make the call, highlight your desired number and press  
or  
.
.
Contacts Entry Options  
To access a Contacts entrys options, select an entry and press  
. Then highlight a phone number and press  
(right  
Options  
softkey).  
Edit to edit the selected entry.  
Call to dial the selected phone number.  
Call:SpeakerOn to dial the selected phone number in  
speakerphone mode.  
SendMessage to send a text message. (See page 105 for  
details.)  
CallAlarm to set a call alarm to the entry (see page 71).  
SetSpeedDial to assign the speed dial numbers to the entry  
(see page 66).  
63  
SetVoiceTag to set a voice dial tag for the entry (see page 81).  
Prepend to alter a phone number by adding numbers to the  
beginning of the entry. (See Prepending a Phone Number  
From Call Historyon page 60.)  
CopytoPersonal to copy the phone number to your 10-4  
Personal List (only appears when 10-4 mode is set to Enable  
and the number does not match any stored entry in your  
Personal List).  
SendContact to send the Contacts entry to another Bluetooth  
device (see page 115).  
Printto print the Contacts entrys data.  
Tip: You can view the next or previous entry by pressing the navigation  
key right or left.  
Adding a Phone Number to a Contacts Entry  
1. From the Contacts list display, select the Contacts entry you  
wish to add a phone number to and press  
.
2. Press (right softkey) >Edit; or  
(right softkey) if a  
Edit  
Options  
URL or email address is selected.  
3. Select the box next to the  
icon and press  
.
.
4. Enter the number and press  
5. Select a label for the number and press  
6. Press (left softkey).  
.
Save  
64  
Editing a Contacts Entrys Phone Number  
1. From the Contacts list display, select the Contacts entry you  
wish to edit the phone number to and press  
.
2. Select the number you wish to edit and press  
(right  
Options  
softkey) >Edit.  
3. Press  
again to edit the number.  
4. Press  
to clear one digit at a time, or press and hold  
to  
erase the entire number.  
5. Re-enter or edit the number and press  
.
6. Select a label for the number and press  
.
7. Press  
(left softkey).  
Save  
Erasing a Contacts Entry From the List  
1. From the Contacts list display, highlight the entry you wish to  
delete and press (right softkey).  
Options  
2. Select EraseContact>Yes.  
65  
Assigning Speed Dial Numbers  
With this feature you can dial Contacts Directory entries with one  
key press for locations 2-9. (For details on how to make calls  
using speed dial numbers, see Using Speed Dialingon  
page 23.)  
Toassignaspeeddialnumber:  
1. Select  
2. Select an available speed dial location and press  
3. Select an entry from the list and press  
4. Select the phone number you want to set as a speed dial  
>Contacts>SpeedDial#s.  
.
.
number and press  
.
or –  
1. From the Contacts list display, select your desired entry and  
press  
.
2. Select the phone number you want to set as a speed dial  
number and press (right softkey) >SetSpeedDial.  
Options  
3. Select an available speed dial location and press  
.
Note: When you select the speed dial location with a phone number  
assigned, you’ll be asked whether you want to overwrite the assigned  
number. Select Yes to overwrite or No to cancel. To delete the previous  
speed dial assignment, select Reset.  
Editing a Contacts Entry  
1. From the Contacts list display, select the entry you wish to  
edit and press  
.
2. Press  
(right softkey) >Edit; or  
(right softkey) if a  
.
Options  
Edit  
URL or email address is selected.  
3. Select the field you want to edit and press  
4. Add or edit the information and press  
5. Press (left softkey).  
.
Save  
66  
Assigning an Image to a Contacts Entry  
You can assign an image to a Contacts entry. The image is  
displayed when the entry calls you.  
Toassignanimageforanentry:  
1. From the Contacts list display, select the entry for which you  
want to assign the image and press  
.
2. Press the navigation key up to highlight the icon and press  
twice.  
3. Select an image and press  
4. Press (left softkey).  
to assign the image to the entry.  
Save  
Selecting a Ringer Type for an Entry  
You can assign a ringer type to a Contacts entry so you can  
identify the caller by the ringer type.  
Toselectaringertypeforanentry:  
1. From the Contacts list display, select the entry for which you  
want to assign a ringer and press  
.
2. Press (right softkey) >Edit; or  
(right softkey) if a  
Edit  
Options  
URL or email address is selected.  
3. Scroll down to the box next to the  
icon and press  
.
4. Select your desired ringer type and press . (When you  
highlight a ringer type, a sample ringer will sound.)  
5. Press  
(left softkey).  
Save  
67  
Secret Contacts Entries  
You can hide an entrys phone number(s) by making them  
secret, which requires your lock code to edit the entry. The  
entry name is still displayed, but the entrys phone numbers are  
replaced by <Secret>.  
1. From the Contacts list display, select the Contacts entry you  
want to tag as secret and press  
(right softkey).  
Options  
2. Select SetSecret.  
3. Enter the 4-digit lock code.  
4. Select On or Off.  
Tip: If you can’t recall your lock code, try using the last four digits of your  
phone number, or 0000.  
Dialing Services  
Your Contacts is preprogrammed with contact numbers for  
various services.  
1. Select  
2. Select CustomerService or DirAssistance.  
3. Press or  
>Contacts>Services.  
.
68  
8. Personal Organizer  
Using Your Phones Calendar  
Use the Calendar to remind you of events or important calls you  
need to make. You can schedule up to 200 events, 15 Call Alarms  
and 40 To Do Items.  
Displaying Your Calendar  
Select  
>Calendar.  
Tip: To change the calendar display views, press the left softkey  
(Monthly or Weekly). In the weekly view, you can easily add or edit your  
own schedule.  
Changing the Calendar Settings  
This setting allows you to change the default settings for your  
phones calendar. You can customize the calendar display  
according to your needs.  
Tochangethecalendarsettings:  
1. From the calendar display, press  
(right softkey) >  
Options  
Settings.  
2. Select one of the following options and press  
:
Holidayto add or reset a holiday on the calendar (SetDate,  
SetWeekly, ResetDate, ResetWeekly, or ResetAll).  
Displayto change the display settings of the calendar  
(CalendarView, MonthlyView, or TimeStartsat).  
Alarmto change the alarm settings of the calendar  
(RingerLength, SnoozeInterval, or SnoozeTimes).  
3. Change the settings and press  
.
69  
Adding a Schedule to the Calendar  
1. From the Calendar display, highlight the day to which you  
want to add a schedule.  
2. Press  
(right softkey) >AddSchedule.  
Options  
3. Enter the description and press  
.
Tip: While entering the description you can also press  
(right  
Mode  
softkey) to select a description from “From To Do List” or “Fr. Schedule  
List”. (You need to store entries in those lists in advance. See “Adding To  
Do Items” on page 72 for details.)  
4. Enter other fields if necessary:  
Descriptionto change the description for the schedule.  
Categoryto select a category (Appointment, Business,  
Meeting, Personal, Vacation, Travel, or Miscellaneous).  
Priorityto select a priority (None, High, or Low).  
Startto set a start time for the schedule.  
Endto set an end time for the schedule.  
Location to edit the location of your schedule (up to 64  
characters).  
Alarm to select the ringer for the alarm.  
AlarmTime to edit the alarm time (number of hours or  
minutes before the event starts). Default alarm time is 10  
minutes.  
Repeat to set the schedules repeating status.  
5. Press  
(left softkey) to save the schedule.  
Save  
Tip: Press the navigation key up or down to scroll by week through the  
calendar, and to scroll by month.  
In the monthly view, days with events scheduled are indicated by a  
small just to the left of the date. In the weekly view, times for  
which you have scheduled events are displayed as colored blocks.  
70  
Adding a Call Alarm to the Calendar  
1. From the Calendar display, highlight the day to which you  
want to add a call alarm and press  
(right softkey).  
Options  
2. Press the navigation key left or right to selectAddCallAlarm.  
3. Enter the phone number directly or press  
(right  
Options  
softkey) for the following options:  
FromPh. Book to select the number from your Contacts.  
Voicemail to select the number for voicemail access.  
4. Select the following items you want to edit and press  
.
Categoryto select a category for the call alarm  
(Appointment, Business, Meeting, Personal, Vacation,  
Travel, or Miscellaneous).  
Time/Date to edit the start time/date.  
Alarm to select the ringer alarm.  
Repeat to set the Call Alarms repeating status.  
5. Press  
(left softkey).  
Save  
Tip: You can also add a call alarm from the Contacts menu.  
(See “Contacts Entry Options” on page 63.)  
Torespondtoacallalarm:  
Press any key to stop the alarm. (The alarm will stop and then  
sound again after the selected snooze interval.)  
Press and hold  
to cancel snoozing.  
Press  
(right softkey) to dismiss the event.  
Dismiss  
Tip: To change the alert settings, from the calendar view, press  
Options  
(right softkey) > Settings > Alarm to set the ringer length and snooze  
options.  
Tocallthephonenumberatthetimeofacallalarmnotification:  
Press  
Press  
or  
to dial the phone number (if applicable).  
to make a 10-4 call (if applicable).  
71  
Adding To Do Items  
Your phone can store and manage 40 To Do items.  
1. From the Calendar display, press  
(right softkey).  
Options  
2. Press the navigation key left or right to select AddToDo.  
3. Enter the description and press  
Tip: While entering the description you can also press  
.
(right  
Mode  
softkey) to select a description from “From To Do List” or “Fr. Schedule  
List”. (You need to store entries in those lists in advance. See “Adding a  
Schedule to the Calendar” on page 70 for details.)  
4. Select an option you want to edit and press  
.
Categoryto select an event category (Appointment,  
Business, Meeting, Personal, Vacation, Travel, or  
Miscellaneous).  
Priorityto select an event priority (None, High, or Low).  
DueTime/Dateto schedule a due time and date.  
Statusto select a status for the To Do items (NeedsAction  
or Completed).  
5. Press  
(left softkey).  
Save  
Adding a To Do List Item to the Calendar  
1. From the Calendar display, press  
(right softkey).  
Options  
2. Highlight ScheduleList and press the navigation key left or  
right and select ToDoList.  
3. Select the item you want to add to the schedule, and press  
(right softkey) >AddtoSchedule.  
Options  
4. Modify the description field (if desired), and set the other  
fields using your keypad and press . (See Adding a  
Schedule to the Calendaron page 70.)  
5. Press  
(left softkey).  
Save  
72  
Event Alerts  
There are several ways your phone alerts you of scheduled  
events.  
Note: Events include Schedule (see page 70), Call Alarm (see page 71)  
and To Do items (see page 72).  
By playing the assigned ringer type.  
By blinking the LED.  
By lighting the LCD backlight (depending on the backlight  
setting).  
Event Alert Menu  
When you have an event alarm scheduled, your phone alerts you  
and displays the event summary.  
Press any key to stop the alarm. (The alarm will stop and then  
sound again after the selected snooze interval.)  
Press and hold  
to cancel snoozing.  
Press  
(right softkey) to dismiss the event.  
Dismiss  
Note: The alarm will not sound when the phone is powered off. However,  
depending on the Power On to Alert setting, the alarm setting will  
be active even if the phone is turned off. (See “Setting Power On  
to Alert” on page 47.)  
To change the alert settings, from the calendar view, press  
(right softkey) > Settings > Alarm to set the ringer length  
Options  
and snooze options.  
Viewing Days Events  
1. From the Calendar display, highlight the day for which you  
would like to view events and press . (If you have events  
scheduled for the selected day, they will be listed in  
chronological order.)  
Tip: If you are in the weekly view, select a block that is colored and  
press  
to display the event’s details.  
2. To display the details of an event listed in the schedule, select  
the event and press  
.
73  
Editing an Event on the Calendar  
To edit a scheduled event on the calendar, select the Weekly view.  
Tomoveanevent:  
1. Highlight the event you would like to move and press  
Options  
(right softkey) >Move.  
2. Use the navigation key to move the event to the date and time  
you would like to and press  
.
Tocopyanevent:  
1. Highlight the event you would like to copy and press  
Options  
(right softkey).  
2. Highlight Move and press the navigation key left or right to  
select Copy/Paste.  
3. Use the navigation key to select the date and time you would  
like to paste the copied event and press  
(right softkey)  
Paste  
or  
Tochangethestartorendtimeofanevent:  
1. Highlight the event for which you would like to change the  
start or end time and press (right softkey).  
.
Options  
2. Highlight Move and press the navigation key left or right to  
select Resize.  
3. Use the navigation key up and down to change the start time.  
To change the end time, press  
(right softkey), then use  
Lower  
the navigation key.  
4. Press  
.
Note: Use the right softkey (Upper or Lower) to toggle between:  
Upper to change the start time.  
Lower to change the end time.  
Toeraseanevent:  
1. Highlight the event you would like to erase and press  
Options  
(right softkey).  
2. Highlight Move and press the navigation key left or right to  
selectErase.  
3. Press >Yes.  
74  
Event List Options  
While you are displaying the days events list, press  
Options  
(right softkey) to access the following options:  
Add Schedule to add a schedule to the calendar.  
Add Call Alarm to add a call alarm to the calendar.  
Add To Do to add a To Do item to the calendar.  
Schedule List to display the Schedule List on the calendar.  
Call Alarm List to display the Call Alarm List on the calendar.  
To Do List to display the To Do List on the calendar.  
Edit to edit the event.  
Set Cal. Secret to make an event secret.  
Send Event to send the event via Bluetooth.  
Erase to erase the event.  
Go to Date to jump to another date on the calendar.  
View Memory to view the memory status for events saved in  
the phone.  
Erase Memory to erase memory for events saved in the  
phone.  
Print to print the calendar events.  
Erasing Events  
Toeraseaday’sscheduledevents:  
1. From the monthly calendar display, select the day for which  
you would like to erase events and press  
.
2. Highlight one of the events and press  
(right softkey)  
Options  
>Erase.  
3. Select an option and press  
.
This to erase a single event.  
Select to erase selected events at one time.  
AllonThisList to erase all events on the list.  
Completedto erase completed events.  
(Above options may not be displayed if you have only one  
event scheduled.)  
75  
4. Select Yes to erase the event(s).  
Tip: To erase completed events, from the monthly view, press  
Options  
(right softkey), and then select To Do List and follow steps 2 - 4 above.  
Note: The Erase function will not delete events that you have designated  
as “secret.” (See “Event List Options” on page 75.)  
Toeraseeventsscheduledbeforeaspecifictimeanddate:  
From the calendar display, press  
(right softkey)>  
Options  
EraseMemory>EraseOld>Yes.  
Toeraseallscheduledevents:  
1. From the calendar display, press  
(right softkey) >  
Options  
EraseMemory>EraseAll>Yes. (An alert will be displayed  
asking you to confirm the deletion.)  
2. Press  
(left softkey) to erase all events.  
Yes  
Note: Scheduled events include Schedule (see page 70), Call Alarm (see  
page 71), and To Do items (see page 72).  
Going to a Specified Date  
1. From the Calendar display, press  
(right softkey) >  
Options  
GoToDate.  
2. Enter the date by using the navigation key and/or the keypad  
and press or (left softkey).  
OK  
76  
Using Your Phones Tools  
Using the Alarm Clock  
Tosetthealarmclock:  
1. Select  
>Tools>AlarmClock.  
Note: To set the alarm clock in a no-service area, press  
in the “Set Current Time/Date” screen.  
(left softkey)  
OK  
2. Select a number and press  
.
3. Select the items you want to edit and press  
.
Description to enter a description of the alarm.  
Time to enter the alarm time. Enter the desired alarm time  
and press  
.
Repeat to select the alarm frequency.  
Alarm to set the alarm on or off.  
4. Press  
(left softkey) to save the alarm settings.  
Save  
Tip: Press the left softkey (On or Off) to toggle the alarm on and off.  
To change the alarm settings, select  
the ringer length and snooze options.  
(right softkey) to set  
Settings  
Note: Alarm will not sound when the phone is powered off. However,  
depending on the Power On to Alert setting, the alarm setting will be  
active even if the phone is turned off. (See “Setting Power On to Alert”  
on page 47.)  
Tostopthealarm:  
Press any key to stop the alarm. (The alarm will stop and then  
sound again after the selected snooze interval.)  
Press and hold the  
to cancel snoozing.  
Press  
(right softkey) to dismiss the alarm.  
Dismiss  
77  
Using the Stop Watch  
Tostartthestopwatch:  
Select  
>Tools>StopWatch.  
Press  
(left softkey) to start the stop watch.  
(left softkey) to stop the stop watch.  
Start  
Press  
Press  
Stop  
(left softkey) to start the stop watch again.  
Resume  
Torecordalaptimewhilethestopwatchisrunning:  
Press  
(right softkey) to record time of first lap.  
Lap  
Press  
(right softkey) again to record next lap. (Up to  
Lap  
5 lap times can be displayed. If you continue recording,  
lap times will be deleted from the oldest.)  
Todisplaythestopwatchoptions:  
1. From the stop watch display, press  
(right softkey).  
Options  
2. Select an option and press  
.
GotoLapList to display a saved Lap List. Press  
(left  
Detail  
softkey) to display the lap list details.  
SavetoLapList to save the recorded lap times. (Available  
when you stop the lap in stop watch operation.)  
Reset to reset the time to zero and clear any recorded lap  
times.  
Using the Countdown Timer  
This feature allows you to use the countdown timer with alarm  
capabilities. You can set up to 5 timers.  
1. Select  
>Tools>Countdown.  
2. Select a number and press  
.
3. Select the items you want to edit and press  
.
Description to enter a description of the countdown.  
Time to enter the countdown time. Enter the desired time  
and press  
.
Alarm to set the countdown alarm on or off.  
78  
4. Press  
(left softkey) to save the countdown settings.  
Save  
5. Press  
(right softkey) to set the RingerLength,  
Settings  
SnoozeInterval, or SnoozeTimes.  
6. Press (left softkey) to save.  
Done  
Tip: Press the left softkey (On or Off) to toggle the countdown alarm on  
and off.  
This feature is not available while your phone is turned off.  
Using the World Clock  
1. Select  
>Tools>WorldClock.  
2. Press the navigation key right or left for changing city or  
country.  
Summer  
Standard  
(right softkey) for changing  
Tip: Press  
(left softkey) or  
between summer and standard time, if applicable. The  
while summer time is displayed.  
icon is shown  
Using the Calculator  
1. Select  
>Tools>Calculator.  
2. Enter numbers using your keypad. Press the left softkey to  
insert a decimal point.  
3. Press the appropriate navigation key for an arithmetic option.  
(Up for addition, Down for subtraction, Left for multiplication,  
Right for division.)  
4. Enter numbers and press  
for the result.  
(right softkey).  
To clear the numbers, press  
CLR  
79  
Personal Information Management  
Displaying Phone Information  
Select  
>Settings>PhoneInfo>MyPhone#.  
Finding Icon Definition  
1. Select  
>Settings>PhoneInfo> IconGlossary.  
2. Select the item for which you want to see the explanation and  
press  
.
Displaying the Version Information  
Select  
>Settings>PhoneInfo>Version.  
Displaying Advanced Information  
Select  
>Settings>PhoneInfo>Advanced.  
80  
9. Voice Services  
Using Voice-Activated Dialing  
You can use a voice dial tag to automatically dial a phone  
number in your Contacts. Your phone can store up to 30 voice  
dial tags.  
Note: Please set the Voice Prompt feature (see page 31) to On before  
using the Voice-Activated Dialing so that you can hear the voice  
instruction from the phone. The default setting is Off.  
Making a Call Using Voice-Activated Dialing  
Withthephoneopen:  
1. Press and hold  
,
, or  
.
2. Follow the voice prompts and recite the entrys voice dial tag  
into your phones microphone.  
Withthephoneclosed:  
1. Press and hold  
.
2. Follow the system prompts and recite the entrys voice dial  
tag into your phones microphone.  
Note: To use this feature, you must have stored entries for voice dialing  
(see “Programming Voice Dial Tag to Your Phone” below).  
Programming Voice Dial Tag to Your Phone  
1. From the Contacts list display, select a Contacts entry to  
which you want to add a voice dial tag and press  
.
2. Press (right softkey) >SetVoiceTag>Add.  
Options  
3. The phone will prompt you to say the name you want to  
program. Wait for the beep and then say the name.  
4 Respond to the prompt by repeating the name after the beep.  
(The display shows Voice Tag Recorded.)  
If you set a voice dial tag, the icon is shown next to the phone  
number on the Contacts list.  
Note: Record voice dial tags in a quiet environment and without the aid  
of an accessory.  
81  
Voice Dial Tag Options  
1. From the Contacts list display, select a Contacts entry for  
which you would like to review the voice dial tag and press  
.
2. Press  
(right softkey)>SetVoiceTag.  
Options  
3. Select an option and press  
.
Play to play the selected voice dial tag.  
Play:Speaker to play the tag in speakerphone mode.  
Change to change the recorded voice dial tag.  
Erase to erase the selected voice dial tag.  
Erasing All Voice Dial Tags  
Toeraseallvoicedialtags:  
1. Select  
>Settings>Security, and then enter your lock code.  
(The Security menu is displayed.)  
2. Select Erase/Reset>EraseVoiceTag.  
3. Press (left softkey) > Yes.  
OK  
82  
Managing Voice/Call Memos  
You can use your phones voice services to record meetings or  
lectures, or brief memos to remind you of important events,  
phone numbers, or grocery list items.  
Recording Voice Memos  
Torecordavoicememo:  
Memo  
1. Press  
or –  
(right softkey) >Record.  
Select  
>Tools>VoiceMemo > Record.  
2. Start recording after the beep.  
Toendtherecordingofyourmemo:  
Press  
,
, or  
.
Note: Your phone can store up to 999 voice memos. The total recording  
time depends on the available memory space on your phone.  
Recording Call Memos  
Options  
1. During a call, press  
(right softkey) >Tools>  
CallMemoRec.  
2. Start recording after the beep.  
3. To finish recording, press  
or  
.
Recording also stops when the call is disconnected.  
Note: Only the other party’s voice is recorded during this process.  
83  
Reviewing Voice/Call Memos  
Memo  
1. Press  
(right softkey) >List.  
2. Select a memo from the list and press  
.
Press  
(right softkey)>Play>All to play all voice  
Options  
memos continuously.  
Press  
(right softkey)>Play>Multiple, and select  
Options  
your desired memos, and press  
>
(left softkey).  
Play  
Press  
(left softkey) to change the playing speed.  
Speed  
Pause  
Press  
(right softkey) to pause. To restart, press  
(right softkey).  
Play  
To play the newer/older memo, press the navigation  
key left or right.  
3. Press  
to stop playing.  
Tip: To set the speakerphone mode on or off, press  
(right  
Options  
softkey) > Speaker On/Off during step 2 above.  
Erasing Voice/Call Memos  
Toeraseanindividualmemo:  
Memo  
1. Press  
(right softkey) >List.  
2. Highlight the memo you want to erase and press  
Options  
(right softkey)>Erase>This>Yes.  
Toeraseallmemos:  
Memo  
1. Press  
(right softkey) >List.  
(right softkey)>Erase>All>Yes to erase all voice  
2. Press  
Options  
memos saved in the phone.  
Toerasemultiplememos:  
Memo  
1. Press  
(right softkey) >List.  
2. Press  
(right softkey)>Erase>Multiple.  
Options  
3. Select the memos you would like to erase and press  
(left  
Erase  
softkey)>Yes.  
Tip: If you select All during step 2 above, you can erase all voice  
recordings (voice memos and call memos) saved in the phone.  
84  
Voice Memo Options  
There are several user options available for managing voice/call  
memos.  
Todisplaythevoicememooptions:  
Memo  
1. Press  
(right softkey) >List.  
2. Highlight a voice memo and press  
(right softkey).  
Options  
3. Select an option and press  
.
Play to play a selected voice memo or all voice memos.  
This to play the selected memo.  
Multiple to play selected memos.  
All to play all memos.  
SpeakerOn or SpeakerOff to activate or deactivate the  
speakerphone mode.  
EditTitle to edit the title of your voice memos.  
Properties to show the properties of your voice memos.  
TypeFilter to filter your voice memos.  
Sortby to sort your voice memos.  
GotoTime to set the starting point of the playing.  
Erase to erase an individual memo or all voice memos.  
This to erase the selected memo.  
Multiple to erase selected memos.  
All to erase all memos.  
85  
Setting the Recording Guard  
With this feature, you can record voice memos without  
interruption from incoming calls.  
1. Press  
(right softkey) >  
(right softkey) >  
Settings  
Memo  
RecordingGuard.  
2. Select On or Off.  
While recording voice memos, your phone will display Phone  
Off.You cannot make or receive calls.  
Setting the Recording Mode  
This feature allows you to match the sensitivity of the  
microphone to the type of recording you are making.  
1. Press  
(right softkey) >  
(right softkey) >  
Settings  
Memo  
RecordingMode.  
2. Select one of the following options and press  
:
Dictation to record a single voice.  
Conference to record multiple voices.  
Setting the Audio Quality  
This feature enables you to set the quality of your recording.  
1. Press  
(right softkey) >  
(right softkey) >  
Settings  
Memo  
AudioQuality.  
2. Select Highor Low.  
Note: Recording time varies with the audio quality setting.  
86  
Setting Up Screen Call  
This feature enables you to screen incoming calls by using a  
recorded announcement, either one that is pre-recorded or one  
that you have recorded. You can also record the callers message  
into the Voice Memo list.  
Activating Screen Call  
TostartScreenCallwhenyouhaveincomingcalls:  
When the phone rings or vibrates, press  
(right  
Options  
softkey)>ScreenCall.  
TosetAutoScreenCall:  
Memo  
1. Press  
(right softkey) > ScreenCall>Auto>On.  
2. Set the answer delay by using numeric keys or by pressing the  
navigation key up or down.  
3. Press  
or  
(left softkey). The icon is displayed on the  
OK  
Standby display.  
Tip: While the caller’s message is being recorded, press  
to answer  
the call, or press to stop recording and disconnect the call.  
Selecting an Announcement for Screen Call  
Memo  
1. Press  
(right softkey) > ScreenCall>Announcement.  
2. Depending on your preference, select Pre-Recorded or Custom.  
Recording Name for a Pre-Recorded Announcement  
Memo  
1. Press  
(right softkey) > ScreenCall>Announcement.  
2. Highlight Pre-Recorded and press  
(right softkey) >  
Edit  
RecordName.  
If your name has already been recorded, select Yes or No  
for overwriting.  
3. Press  
time is 12 seconds.)  
4. Press to stop recording.  
to start the 1st recording. (The maximum recording  
5. After the 1st recording, press  
again to start the 2nd  
recording.  
6. Press  
to stop recording.  
87  
Recording a Customized Announcement  
Memo  
1. Press  
(right softkey) > ScreenCall>Announcement.  
2. Highlight Custom and press  
(right softkey) >Record.  
Edit  
If your announcement has already been recorded, select  
Yes or No for overwriting.  
3. Press  
to start the 1st recording. (The maximum recording  
time is 12 seconds.)  
4. Press  
to stop recording.  
5. After the 1st recording, press  
again to start the 2nd  
recording.  
6. Press  
to stop recording.  
Reviewing an Announcement  
Memo  
1. Press  
(right softkey) > ScreenCall>Announcement.  
2. Highlight Pre-Recorded or Custom and press  
(right  
Edit  
softkey) >Play or Play:Speaker.  
Erasing an Announcement  
Memo  
1. Press  
(right softkey) > ScreenCall>Announcement.  
2. Highlight Pre-Recorded or Custom and press  
(right  
Edit  
softkey).  
3. Select EraseName or Erase. (A confirmation will be displayed.)  
4. Select Yes.  
88  
10. 10-4  
10-4 allows you to enjoy quick, two-way, walkie-talkie-style”  
communication with your friends, family, and co-workers. You  
can make 1-to-1 or 1-to-many calls (up to 5 others on the same  
call) to any other 10-4 user, anywhere on the Network. You can  
make and receive 10-4 calls when your phone displays  
.
Warning! Please be sure that enabling 10-4 affects the phone’s talk and  
standby times to a large degree.  
Starting 10-4  
Setting 10-4 Mode  
1. Select  
>Settings > 10-4>Enable/Disable>Enable or Disable.  
(The default setting is Disable.)  
Enable to make or receive 10-4 calls any time your phone  
is not in use.  
Disable to disable your phones 10-4 service; you will not  
be able to make or receive 10-4 calls or access your 10-4  
Contacts entries.  
10-4 Call Alerts  
There are several ways your phone alerts you during 10-4 calls.  
When you make or receive a 10-4 call:  
The phone beeps (depending on the Ringer Type).  
The backlight illuminates.  
The screen displays a 10-4 call message.  
The other partys 10-4 number and name (if available) are  
displayed.  
The screen displays who has the floor.  
The status of a 10-4 call:  
The Green LED On indicates you have the floor and may speak.  
The Red LED On indicates another contact has the floor.  
The LED Off indicates the floor is open. (You can take the  
floor and speak by pressing and holding the 10-4 key on the  
left side of your phone  
.)  
89  
Making and Receiving a 10-4 Call  
Displaying the 10-4 List  
From standby mode, press  
(left softkey) or  
to access  
10-4  
the 10-4 List.  
Tip: The first time you access the list, the 10-4 Help message will appear.  
Press (left softkey) and (left softkey) to read a brief introduction  
Yes  
of 10-4.  
Next  
Selecting a Contacts List  
When your phone displays a 10-4 List, the left softkey is labeled  
Goto. To switch to another Contacts list, press  
(left  
Go to  
softkey) and select your desired list and press  
.
CompanyList/CompanyGrps. contain company-provided  
contacts (up to 200 entries). Your company list can only be  
created and modified by an authorized administrator on the 10-  
4 server. When the lists are empty, Company List/ Company  
Grps. will not appear on the display.  
PersonalList/PersonalGrps. contain your personal 10-4  
Contacts entrys names and numbers, separately or in groups.  
You can create and edit your own personal list. Your phone  
can store a total of 200 entries (you may include up to five  
Contacts entries per group).  
10-4Outgoing shows the last 20 different 10-4 calls you placed.  
10-4Incoming shows the last 20 different 10-4 calls you  
accepted.  
10-4Missed shows the last 20 10-4 calls you missed.  
Note: The icon next to the group name indicates a group.  
90  
Making a 10-4 Call (1-to-1 Call)  
You can place a 1-to-1 10-4 call by selecting a Contacts entry  
from the 10-4 List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to place a call (CompanyList, PersonalList, 10-4Outgoing,  
10-4Incoming, or 10-4Missed) and press  
.
Tip: You can also select Enter 10-4# from Go to option to enter a 10-4  
number directly. See page 92 for details.  
3. Highlight the Contacts entry you want to call, and press and  
hold  
to place the call and get the floor. (You will see  
10-4calling... and Connecting... followed by Youhavefloor.You  
can now begin speaking.)  
or –  
Highlight the Contacts entry you want to call and press and  
release  
to place the call. (The call will connect as  
described above, but Floorisopen.will appear on the screen  
and either you or other party may press and hold  
the floor and speak.)  
to take  
Note: During a 10-4 call, the “floor” is the right to speak. When you see  
Floor is open.,” the first person to press can speak (while holding  
the key). Only the person who has the floor can speak. The phone beeps if  
you press when the other party has the floor.  
4. Continue holding  
speaking, release  
as you speak. When you finish  
to allow the other party to speak.  
(When the other party takes the floor, you will see the  
speakers name and phone number and the text hasfloor.)  
5. When you are finished, press  
.
Note: When neither party has the floor during a 10-4 call, “Floor is open.”  
appears on the display. If no one takes the floor for 20 seconds, the 10-4  
call ends automatically.  
Tip: If you press  
standard voice call.  
or  
during step 3 above, you can make a  
91  
Making a 10-4 Call (Group Call)  
You can make a 10-4 call to all members in a Group entry, which  
you have in your 10-4 List. You can communicate with up to five  
members at a time.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to make a Group call (CompanyGrps. or PersonalGrps.)  
and press  
.
3. Highlight the group entry you want to call, and press and hold  
to place the call and take the floor. (You will see  
10-4calling... and Connecting... followed by Youhavefloor.”  
Continue with the 10-4 call as described previously.)  
To make a 10-4 call to a group member, select your  
desired group, highlight your desired group member, and  
press and hold  
.
If one of the group members takes the floor, you will see  
the members name and 10-4 number on the display.  
4. When the call is finished, press  
.
Tip: The phone beeps if you press  
when another party has the floor.  
You can also make a Group Call after checking the group member.  
Press to display group members, highlight <Call Group> and  
press and hold during step 3 above.  
To redial your last 10-4 call, highlight Redial and press  
10-4 List.  
from the  
Making a 10-4 Call by Entering a Number  
1. From standby mode, enter the 10-4 number you want to dial.  
2. Press to place the 10-4 call.  
3. Continue with the 10-4 call, pressing and holding  
to  
speak and releasing it to allow other parties to reply.  
4. When the call is finished, press  
.
or –  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > Enter10-4#.  
Go to  
92  
3. Enter the 10-4 number you want to dial.  
4. Follow steps 2-4 above.  
Making a 10-4 Call Using the Call List Key  
Toplacea10-4callusingtheCallListkey:  
1. Press  
with the phone closed. Recent Calls list appears on  
the sub LCD.  
2. Use to select a 10-4 history entry.  
3. Press and hold  
.
Missed Call Notification for 10-4 Calls  
When an incoming 10-4 Call is not answered, the Missed Call  
Notification is displayed on your screen.  
Tocallthelastmissed10-4Call:  
Simply press and hold  
while the Missed Call Notification  
is displayed. (Continue with the 10-4 call as described  
previously.)  
Toerasethemissed10-4CallLog:  
Press  
(right softkey).  
Dismiss  
Todisplaythemissed10-4call:  
Press  
(left softkey) while the Missed Call Notification is  
View  
displayed. To call the entry, highlight the entry you want to  
call, and press and hold  
described previously.)  
. (Continue with the 10-4 call as  
93  
Receiving a 10-4 Call  
1. Make sure your phones 10-4 mode is enabled (see Setting  
10-4 Modeon page 89).  
2. When you receive a 10-4 call from a Contacts entry, 10-4  
Call,the entrys name, and the 10-4 number appear on the  
display.  
When you receive a group call, Group Call, group  
members name, and the 10-4 number appear.  
3. If the person placing the call has kept the floor (held the  
you will see the entry name and 10-4 number along with  
hasfloor.,and you will hear the caller speaking.  
),  
4. When the caller finishes speaking and releases  
, you will  
see Floorisopen.on the display screen. Press and hold  
to take the floor and reply to the caller. (You will see  
Youhavefloor.and hear a tone confirming that you may  
speak.)  
5. When the conversation is finished, press  
.
Tip: You can also receive a 10-4 call with the phone closed. Press and  
hold to take the floor when the floor is open.  
Note: You can change the volume and the speaker setting while a 10-4  
call is activated. Volume: Adjust the voice volume by using or by  
pressing the navigation key up or down (except when you are pressing  
and holding  
pressing  
). Speaker: Switch the speaker on or off by  
.
94  
10-4 Options  
When you use 10-4, several user options are available by  
Options  
pressing  
(right softkey).  
Edit to edit a 10-4 number and/or name. (See page 99.)  
SendMessage to send a text message. (See page 105 for  
details.)  
CopytoPersonal to copy a 10-4 Contacts entry in the Personal  
Grps., Company List or Company Grps. to the Personal List.  
CopyGroup appears when you highlight a group entry. (This  
option doesnt appear if the entry is already in the Personal  
List or when you select Personal List/Personal Grps.)  
CopytoPh. Book to copy a 10-4 Contacts entry to the Contacts.  
Erase to erase a Contacts entry. EraseGroup appears when you  
highlight a group entry.  
AddContact to add a new Contacts entry. (See page 97 for  
details.) AddGroup appears when you highlight a group entry.  
(See page 98 for details.)  
Erase10-4List to erase lists saved in the 10-4 (except Company  
List/Company Grps.).  
Help to see the 10-4 instructions page.  
95  
Adding and Editing 10-4 Contacts Entry  
Copying an Entry to your Personal List , Personal Group  
List, or Contacts List  
You can copy an entry to your Personal or Personal Group List,  
or Contacts from several different sources.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select the list from which you  
Go to  
want to copy an entry (CompanyList, CompanyGrps., Personal  
List, PersonalGrps., 10-4Outgoing, 10-4Incoming, or 10-4Missed)  
and press  
3. Highlight the entry you want to copy (or scroll to highlight  
the Redial entry at the top of your screen) and press  
.
Options  
(right softkey). Select an option and press  
.
CopytoPersonal to copy the Contacts entry to the  
Personal List (if available).  
CopyGroup to copy the group entry to the Personal Group  
List (if available).  
CopytoPh. Book to copy the Contacts entry to the  
Contacts.  
4. Press  
(left softkey) to copy and save the entry to your  
Yes  
Personal or Personal Group List, or Contacts.  
Note: Your Company Lists can be set up and edited only by an  
administrator on the 10-4 server. You cannot add or edit Contacts/group  
entries to your Company Lists.  
Saving a 10-4 Number  
You can save a 10-4 number from the ending display to your  
Personal or Personal Group list.  
1. From the ending display, press  
(right softkey) >Save.  
Options  
2. Enter a name and press  
.
96  
3. Press  
(left softkey) >  
(left softkey).  
Yes  
Save  
Note: If the number is already stored in the Personal or Personal Group  
lists, the “Save” option does not appear.  
Finding an Entry in the 10-4 List  
You can find your desired entry by entering a few letters.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey), and select your desired list  
Go to  
(CompanyList, CompanyGrps., PersonalList, or PersonalGrps.)  
and press  
.
3. Enter the first letter or the first few letters of the name.  
The display shows the list beginning with the letter(s)  
you entered.  
4. Scroll through the list and press  
to select your desired  
entry.  
Adding a New Contacts Entry to Your Personal List  
You can store the total of 200 entries in the Personal List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalList> <AddContact>.  
Go to  
3. Enter a name for the new Contacts entry and press . (This is  
the name you will see when calling or receiving a call from the  
entry.)  
4. Select the 10-4Number field, enter the Contacts entrys 10-digit  
10-4 number (their phone number) and press  
.
5. Press (left softkey) to save the new Contacts entry to  
Save  
your Personal List.  
Tip: You are not allowed to use the following symbols during step 3:  
@ : ; / * ) (.  
97  
Adding a New Group to Your Personal Group List  
You can add new groups to the Personal Group List. Each group  
can include up to five members. You can enter a group member  
directly, or select the member from the Company List or  
Personal List.  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalGrps. ><AddGroup>.  
Go to  
3. Enter a Group Name, and press  
(left softkey) >  
(left  
Next  
OK  
softkey).  
4. Press  
(right softkey).  
Add  
5. Select an option and press  
.
New to add a new Contacts entry. See the previous page  
for details.  
fromCompany to add a Contacts entry from your Company  
List (if applicable).  
fromPersonal to add a Contacts entry from your Personal  
List.  
6. Scroll to select the Contacts entries you want to add and press  
or  
(right softkey) to include the entries.  
Pick  
7. Press  
(left softkey) when you are finished selecting  
Done  
Contacts entries, then press  
(left softkey) to update  
Update  
your Personal Group List with the new group entry.  
Tip: You can also add members directly. From step 4 above, highlight  
<Add Members> and press . Enter the new member’s name and 10-4  
number and press  
(left softkey) to save the entry.  
Save  
98  
Editing a Contacts Entry in Your Personal List  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalList.  
Go to  
3. Highlight the entry you want to edit and press  
(right  
Options  
softkey) > Edit.  
4. Select the field you want to edit (Name or 10-4Number) and  
press  
.
5. Edit the entry, and press  
(left softkey)>  
(left softkey)  
Save  
OK  
to save your changes.  
Editing a Group in Your Personal Group List  
1. Press  
(left softkey) or  
to access the 10-4 List.  
10-4  
2. Press  
(left softkey) > PersonalGrps.  
Go to  
3. Highlight the group entry you want to edit and press  
Options  
(right softkey) > Edit.  
4. Edit the group name and press  
or  
(left softkey).  
OK  
If you dont need to edit the group name, press  
(left  
Next  
softkey) and skip step 5.  
5. Press  
(left softkey) to save your changes.  
Save  
6. To edit a group member, highlight the Contacts entry you  
want to edit and press (right softkey) > Edit.  
Options  
7. Select the field you want to edit (Name or 10-4Number) and  
press  
.
8. Edit the entry, and press  
(left softkey) >  
(left softkey)  
Save  
OK  
>
(left softkey).  
Update  
99  
Erasing 10-4 List Entries  
ErasinganEntryinYourPersonalListorPersonalGroupList  
ToeraseaContactsentryoragroupentry:  
1. From the 10-4 List, press  
(left softkey) > PersonalList or  
Go to  
PersonalGrps.  
2. Highlight the entry you want to erase and press  
(right  
Options  
softkey) >Erase.  
EraseGroup appears when you select PersonalGrps.  
3. Select Yes.  
Toeraseagroupmember:  
1. From the 10-4 List, press  
(left softkey) >PersonalGrps.  
Go to  
2. Select your desired group and press  
to display the group  
members.  
3. Highlight the Contacts entry you want to erase and press  
(right softkey).  
Options  
4. Select Erase>Yes>  
(left softkey).  
Update  
Erasing a 10-4 List  
You can erase all lists saved in the 10-4 (except Company  
List/Company Grp. List).  
1. From the 10-4 List, press  
(right softkey) >  
Options  
Erase10-4List.  
2. Select an option and press  
.
Outgoing to erase all outgoing 10-4 calls.  
Incoming to erase all incoming 10-4 calls.  
Missed to erase all missed 10-4 calls.  
AllCalls to erase all 10-4 call history, except redial.  
AllPersonalEnt. to erase all entries in Personal Lists and  
Personal Grps. You are prompted to enter your 4-digit  
lock code. (See Unlocking Your Phoneon page 51.)  
3. Select Yes.  
Tip: The Redial number will not be erased.  
100  
Updating the Company List and Personal List  
ToupdateyourCompanyorPersonallistmanuallythrough10-4  
server:  
Select  
>Settings>10-4>ListUpdate.  
Managing 10-4 Settings  
Setting Speed Dialing for 10-4 Entries  
1. Select  
2. Select an unassigned number and press  
3. Press (left softkey), and select the list from which you  
>Contacts >SpeedDial#s.  
.
Go to  
want to set a speed dial (CompanyList, CompanyGrps., Personal  
List, or PersonalGrps.) and press  
.
4. Select the Contact entry and press  
.
or –  
Select the group, and select an option and press  
.
Assign to assign the selected group as a speed dial.  
Details to display the group details. You can select the  
group member from the group list.  
Tousespeeddialfora10-4entry:  
From standby mode, press the appropriate key and press  
.
101  
Setting 10-4 Guard  
This feature enables you to display the warning message when  
you cannot receive 10-4 calls. The warning message appears  
when you are launching the Web or Java applications.  
1. Select  
> Settings>10-4>10-4Guard. (A message will be  
displayed.)  
2. Press  
(left softkey) to continue.  
OK  
3. Select On to activate 10-4 Guard. (Select Off to deactivate this  
feature.)  
Setting Ringer Types for 10-4 Calls  
1. Select  
>Settings>10-4> Sounds> RingerType.  
2. Select 10-4Calls, 10-4Missed, or 10-4FloorTone.  
3. Select your desired ringer type and press  
.
Setting the Ringer Volume for 10-4 Calls  
1. Select  
>Settings>10-4> Sounds> RingerVolume.  
2. Select SeparateVol. and press the navigation key left or right to  
select a volume level.  
3. Press  
(left softkey) to save.  
Done  
Setting a Vibrate Pattern for 10-4 Calls  
You can select your favourite vibrate pattern for 10-4 calls.  
1. Select  
>Settings>10-4> Sounds> VibratePattern.  
2. Select 10-4Calls or 10-4Missed.  
3. Select a vibrate pattern and press  
.
102  
Setting an Alert Notification for 10-4 Calls  
1. Select  
2. Select 10-4Calls, 10-4Missed, or HeadsetAlert.  
3. Select an option and press  
Toadjustthefloortonevolume:  
>Settings>10-4> Sounds> Alerts.  
.
1. Select  
>Settings>10-4> Sounds> Alerts.  
2. Select FloorToneVol. >Earpiece or Speaker.  
3. Press the navigation key left or right to select a volume level  
and press  
(left softkey).  
Done  
Tip: You can also set alerts using the Alerts settings menu. (See “Alert  
Notification” on page 32.)  
Setting the Speakerphone for 10-4 Calls  
Select > Settings>10-4>Speakerphone>On or Off.  
Note: If the phone’s ringer volume is set to Vibrate All, Ringer off, or  
Silence All, the speakerphone turns off. Press  
speakerphone mode on.  
to turn the  
Selecting the Default View of the 10-4 List  
1. Select  
>Settings>10-4> DefaultView. (The default setting is  
Personal List.)  
2. Select your desired list and press  
.
Setting the Floor Display of the 10-4 Calls  
1. Select  
>Settings>10-4> FloorDisplay.  
2. Select TextOnly or Text&Image.  
To see a preview of the display, press  
(right  
Preview  
softkey).  
103  
11. Messaging  
New Messages  
Toviewanewmessage:  
When you receive a text message or a Web Alert, it will  
automatically appear on your phones main display screen  
with the  
icon. When you receive a picture message, the  
information of the message appears on your phones main  
display screen with the  
view the message.  
icon. Press  
(left softkey) to  
Go  
Note: When there are two or more notifications, a Missed Alerts list is  
displayed in standby mode. Highlight a text/picture message in the  
list and press  
(left softkey) to display the message details.  
View  
You can choose to show only the icon when you receive a  
message(s). In this case, select > Messaging >Text,  
Picture Msg, or Web Alerts, and select a message and press  
to view a message. See “Setting Message Notification” on  
page 40.  
Use your navigation key to scroll down and view the entire  
message.  
Press  
Press  
Press  
Press  
(left softkey) to dial the callback number.  
Call  
(left softkey) to reply to the sender.  
Reply  
(left softkey) to go to the Web site.  
Go  
(left softkey) to forward the message (appears  
Forward  
only if there is no senders phone number, email address, or  
callback number).  
Press  
(right softkey) to display options.  
Options  
Displaying Messages  
Todisplayatextmessagefromthemainmenu:  
1. Select  
2. Select Text >Inbox, SentMail, Pending, Drafts, or your defined  
folder and press  
3. Select the message you want to see and press . (To display  
the message options, press [right softkey].)  
>Messaging.  
.
Options  
104  
Todisplayapicturemessagefromthemainmenu:  
1. Select >Messaging>PictureMsg.  
2. Select your desired picture message and press  
3. Press (left softkey) to display the picture message.  
.
Go  
TodisplayWebAlerts:  
1. Select >Messaging>WebAlerts.  
2. Select the header of the message you want to see and press  
.
(To display the web alerts options, press  
[right  
Options  
softkey].)  
Toreadothermessages:  
Press the navigation key right or left to read the next or  
previous message.  
Note: Web Alerts include URLs etc. When you buy a ringer or image  
through your computer for your phone, your phone will receive Web  
Alerts. Press  
(left softkey) to go to the website and follow steps to  
Go  
download it to your phone.  
Sending a Text Message  
1. Select  
>Messaging>SendMessage>Text.  
2. Select the entry method you prefer:  
Contacts to select a recipient from your internal Contacts.  
(Qualifying Contacts entries must contain a phone  
number or an email address.)  
Phone# to enter the phone number of the person to  
whom you wish to send a message.  
Email to enter the recipients email address.  
Note: You can also press  
your desired list.  
(right softkey) to select recipients from  
Others  
3. Press  
to confirm the recipient. (You may include up to 50  
recipients per message.)  
4. Press (left softkey) when you have finished selecting and  
Next  
entering recipients.  
105  
5. Compose a message and press  
or  
(left softkey).  
OK  
To enter a message, use your keypad to type your  
message. Press (right softkey) to select a character  
Mode  
input mode. (See Selecting a Character Input Modeon  
page 25.)  
6. Scroll down to select the message priority (Normal or Urgent),  
set the callback number, and/or set the signature.  
7. Review your message and press  
(left softkey). (You may  
Send  
also select additional messaging options by pressing  
Options  
[right softkey] to change the recipients or save to draft.)  
Tip: You can also send a text message when the left softkey displays the  
option.  
Send Msg  
Creating Folders for Messages  
You can create up to ten folders to store your Messages. When  
10 of your defined folders exist, the Create Folderoption will  
not appear.  
Tocreateanewfolder:  
1. Select  
>Messaging>Text.  
(right softkey) >CreateFolder.  
2. Press  
Options  
3. Enter a folder name and press  
4. Press (left softkey).  
or  
(left softkey).  
OK  
Save  
Tosetanoptionalfeaturefortheaddedfolder:  
1. During step 3 above, scroll down to select other menu options.  
AutoFilingto file messages into the folder automatically.  
The following options appear when this feature is set to on.  
Keywordto set a keyword for Auto Filing. Enter a  
keyword and press  
.
Notify to set the notification display to on or off when  
you have an unread message matching the defined  
folder.  
EnvelopeIcon to set the envelope icon display to on or  
off when you have unread message matching the  
defined folder.  
2. Press  
(left softkey).  
Save  
106  
Erasing Messages  
1. Select  
>Messaging>Text.  
2. Select Inbox, SentMail, Pending, Drafts, or your defined folder  
and press  
.
3. Highlight a message you want to erase and press  
(right  
Options  
softkey)>Erase.  
4. Select This.  
Tip: This option may not be displayed if you save only one message in a  
folder.  
To erase all messages, select All.  
5. Select Yes.  
Erasing Selected Messages in All Folders  
1. Open any message folder. (By following steps 1-2 above.)  
2. Press  
3. Press  
4. Press  
(right softkey) >Erase> Multiple.  
Options  
to select messages to be erased.  
(left softkey).  
Erase  
107  
®
12. Using Bluetooth  
Bluetooth is a short-range communications technology that  
allows you to connect wirelessly to a number of Bluetooth  
devices, such as headsets, hands-free car kits, and Bluetooth  
enabled handhelds, PCs, and wireless phones. The Bluetooth  
communication range is usually up to approximately 10 meters  
(30 feet).  
Accessing the Bluetooth Menu  
Select  
>Settings>Bluetooth.  
Turning Bluetooth On and Off  
By default, your phones Bluetooth feature is turned off. Turning  
Bluetooth on makes your phone availableto other in-range  
Bluetooth devices. To make your phone visible to other devices  
you must also set your phones visibility to other than Hidden.  
(See page 109.)  
1. From the Bluetooth menu display, select Enable/Disable.  
2. Select Enable to enable Bluetooth. Select Disable to disable  
Bluetooth.  
Note: Enabling the Bluetooth settings affect the phone’s talk and standby  
times.  
Bluetooth Status Indicators  
The following icons show your Bluetooth connection status at a  
glance:  
Bluetooth feature is active. It turns to green when  
connected to a Bluetooth device.  
Your phone is discoverable by another Bluetooth device.  
Your phone is communicating with a Bluetooth device.  
108  
Using the Bluetooth Settings Menu  
The BluetoothSettings menu allows you to set up many of the  
characteristics of your phones Bluetooth service, including:  
Setting your phones visibility (or discoverability) for other  
Bluetooth devices  
Choosing a device for your Bluetooth calls  
Entering or changing the name your phone uses for Bluetooth  
communication  
Displaying your phones Bluetooth device information  
Bluetooth Settings: Visibility  
Visibility to manage your phones availability to other Bluetooth  
devices.  
Toconfigureyourphone’svisibility(discoverability)toother  
Bluetoothdevices:  
1. From the Bluetooth menu display, select Visibility.  
2. Select a Visibility setting and press  
:
AlwaysVisible to allow other Bluetooth devices to detect  
and identify your phone.  
Visiblefor3min. to allow other Bluetooth devices to detect  
your phone for 3 minutes, after which it returns to hidden  
mode.  
Hidden to prevent other Bluetooth devices from  
detecting and identifying your phone.  
Note: It is recommended that your phone is in standby mode when  
receiving data from other devices via Bluetooth.  
Bluetooth Settings: Voice Priority  
VoicePriority allows you to choose the default device you want to  
use for incoming and outgoing calls.  
Tosetthevoicepriority:  
1. From the Bluetooth menu display, select VoicePriority.  
2. Select Phone or Hands-free.  
Phone to switch the audio between your phone and  
hands-free devices.  
Hands-free to allow hands-free devices only to be used.  
109  
Bluetooth Settings: My Device Name  
MyDeviceName allows you to select a Bluetooth name for your  
phone. Your phones Bluetooth name will appear to other in-  
range Bluetooth devices, depending on your Visibility settings.  
TosetaBluetoothnameforyourphone:  
1. From the Bluetooth menu display, select MyDeviceName.  
2. Press and hold  
to clear the current name.  
3. Use your keypad to enter a new name and press  
.
Bluetooth Settings: My Device Information  
Todisplayyourphone’sdeviceInformation:  
From the Bluetooth menu display, select MyDeviceInfo.  
Setting Auto-Accept  
You can configure your phones accessibility to other Bluetooth  
devices.  
Toconfigureyourphone’saccessibilitytootherBluetooth  
devices:  
1. Select  
2. Highlight the device from the trusted devices list and press  
(right softkey) > Auto-Accept.  
>Tools>Bluetooth.  
Options  
3. Select a setting and press  
:
Onto allow other Bluetooth devices to initiate a  
connection without any confirmation.  
Offto display a confirmation screen, from which you can  
accept or deny the connection.  
110  
Bluetooth Profiles  
All the Bluetooth settings you configure are stored in your  
phones Bluetooth user profile. Different profiles can be used for  
specific Bluetooth functions.  
HeadsetProfile This profile functions as a wireless ear jack.  
When an incoming call is received, the ringer can be heard  
through the headset. While using your phone, you can use the  
headset instead of the phone by pushing a button on the  
headset, which has the same effect as inserting a jack into the  
phone. Increase or decrease the volume by using  
on the  
.
left side of the phone  
Hands-FreeProfile This profile functions as a wireless car kit.  
Incoming calls ring to the hands-free headset or device. Calls  
can be received by pressing a button on the headset or device.  
For dialing, four functions are supported: recent call dial,  
voice dial, speed dial, and number dial. Increase or decrease  
the volume by using  
.
DUN:Dial-UpNetworkProfile This profile functions as a  
wireless data cable, connecting a PC or PDA to a network  
through your phone.  
OPP:ObjectPushProfile This profile uses the Generic Object  
Exchange profile services to send data objects between  
devices and can be used to exchange objects like calendar  
(vCal) and business cards (vCard).  
BPP:BasicPrintingProfile This profile enables simpler  
printing from your phone to a Bluetooth wireless technology  
enabled printer.  
111  
Pairing Bluetooth Devices  
Paired Devices  
The Bluetooth pairing process allows you to establish a trusted  
connection between your phone and another Bluetooth device.  
When devices are paired, a passcode (PIN Code) is shared  
between devices, allowing for fast, secure connections while  
bypassing the discovery and authentication process.  
TopairyourphonewithanotherBluetoothdevice:  
1. Select  
>Tools>Bluetooth><AddNew>>Search. (Your  
phone will display a list of discovered in-range Bluetooth  
devices.)  
2. Select the device you wish to pair with and press  
.
3. Select AddtoTrusted.  
4. Enter the passcode and press . (When the owner of the  
other device accepts the connection and enters the same  
code, the pairing is complete.)  
Waiting for Request  
If you are going to be using a Dial-Up Network (DUN) profile to  
pair with a PC or PDA, you will need to allow the other device to  
initiate pairing with your phone.  
ToallowyourphonetobepairedwithanotherBluetoothdevice:  
1. Select  
2. Follow the onscreen prompts to enter your passcode and  
press  
>Tools>Bluetooth><AddNew>>WaitforRequest.  
.
112  
Using the Trusted Devices Options  
Once you have created paired devices, several options are  
available from the trusted devices list.  
Tousethetrusteddevicesoptions:  
1. From the trusted devices list, highlight a device.  
2. Press  
(right softkey) to display the following options:  
Options  
Connect or Disconnect to connect to or disconnect from  
the Bluetooth device (if applicable).  
SendItem to send an item saved on your phone to another  
Bluetooth device (if applicable).  
Printto print the data using Basic Printing Profile or  
Object Push Profile (if applicable).  
EditName to edit the name of the trusted device.  
Auto-Acceptto configure your phones accessibility to  
other Bluetooth devices. (See page 110.)  
DeviceInfo to display the trusted devices information.  
Sortby to sort the trusted devices.  
Delete to delete the selected device from the list.  
DeleteAll to delete all devices from the list.  
Settings to display the Bluetooth settings menu.  
(See page 109.)  
113  
Printing Data via Bluetooth  
You can print out your Contacts entries, business card, calendar  
event, and messages stored on the phone. (Some Bluetooth  
wireless technology enabled printers may not support this  
feature.)  
ToprintdataviaBluetooth:  
1. Select  
2. Highlight the device from the trusted devices list and press  
(right softkey) >Print.  
>Tools>Bluetooth.  
Options  
3. Select a category (BusinessCard, Contacts, CalendarEvent,or  
Message) and press  
.
4. Follow the onscreen instructions to select the item(s) to print.  
5. Select HandsetDefault or PrinterDefault.  
HandsetDefaultto print items by creating a print job via  
the Basic Printing Profile.  
PrinterDefaultto print items using the default printer  
settings via the Object Push Profile.  
6. Make sure the printer is ready to print data, and press  
Print  
(left softkey).  
7. If necessary,enter the PIN and press  
.
Note: Before you start using the Bluetooth feature, make sure your  
phone’s battery is fully charged.  
114  
Sending Data via Bluetooth  
You can send data saved on your phone to another Bluetooth  
device.  
1. Select  
2. Highlight the device from the trusted devices list and press  
(right softkey)>SendItem.  
>Tools>Bluetooth.  
Options  
3. Select your desired item (BusinessCard, Contactsor  
CalendarEvent) and press  
.
4. Follow the onscreen instructions to select the item(s) to send.  
5. Make sure the other device is ready to receive data, and then  
press  
(left softkey).  
Send  
6. If necessary, enter the PIN and press  
.
Note: Due to different specifications and features of other Bluetooth  
wireless technology compatible devices, display and operations may be  
different, and functions such as transfer or exchange may not be  
possible with all Bluetooth wireless technology compatible devices.  
115  
13. Service Features  
Using Voicemail  
All unanswered calls to your phone are automatically transferred  
to voicemail, even if your phone is in use or turned off.  
Voicemail Notification  
There are several ways your phone alerts you to new voicemail  
messages:  
By displaying a message on the screen.  
By playing the assigned ringer type.  
By blinking the LED.  
By displaying  
at the top of your screen.  
New Voicemail Message Alerts  
When you receive a new voice message, your phone alerts you  
and prompts you to call your voicemail.  
Tocallyourvoicemail:  
Press  
or –  
Select  
.
>Messaging>Voicemail>CallVoicemail or  
Call:SpeakerOn if you select IconOnly in Notification setting.  
(See Setting Message Notificationon page 40.)  
Todisplayyourmissedalerts:  
Select  
> MissedAlerts.  
Displaying Voicemail Details  
Select  
> Messaging> Voicemail>Details.  
116  
Retrieving Your Voicemail Messages  
Press and hold  
. (Your phone will dial your voicemail  
box.)  
or –  
Select  
> Messaging>Voicemail>CallVoicemail.  
Note: You are charged for airtime minutes when you are accessing your  
voicemail from your phone.  
Clearing the Message Icon  
Press  
> Messaging>Voicemail>ClearCount>Yes.  
Editing Your Voicemail Number  
You may need to change the number to retrieve your voicemail.  
Tochangethenumber:  
1. Select  
> Messaging > Voicemail > EditVoicemail#.  
2. Edit your voicemail number and press  
.
Toresetyourvoicemailnumber:  
1. Select  
2. Press  
3. Press  
> Messaging > Voicemail > EditVoicemail#.  
(right softkey) > ResetVoicemail# > Yes.  
Options  
.
117  
Responding to Call Waiting  
When you are on a call, Call Waiting alerts you to incoming calls  
by sounding beeps. Your phones screen informs you that  
another call is coming in and displays the callers phone number  
(if available).  
Torespondtoanincomingcallwhileyou’reonacall:  
Press  
. This puts the first caller on hold and answers the  
second call.  
Toswitchbacktothefirstcaller:  
Press  
again.  
Note: Call Waiting may not be available while roaming off the home network.  
Making a Three-Way Call  
With Three-Way Calling, you can talk to two people at the same  
time. When using this feature, the normal airtime rates will be  
charged for each of the two calls.  
1. Enter a number you wish to call and press  
or  
.
2. Once you have established the connection, press  
to put  
the first caller on hold.  
3. Enter the second number you wish to call and press  
.
4. When youre connected to the second party, press  
again  
to begin your three-way call.  
If one of the people you called hangs up during your call, you  
and the remaining caller stay connected. If you initiated the call  
and are the first to hang up, all three callers are disconnected.  
118  
Web  
With Web access on your phone, you will be able to browse  
full-color graphic versions not just text versions of your  
favourite website, making it easier than ever to stay informed  
while on the go. Check sports scores, trade stocks, and shop all  
on your phone anywhere on the Home network.  
Launching the Web  
Press  
or –  
Select  
.
> Web.  
Net Guard  
With the Net Guard setting, the confirmation display will appear  
to connect to the Internet. This feature helps you avoid  
accidental connections. You can disable the Net Guard in the  
future by selecting AlwaysAuto-Connect when the Net Guard is  
displayed.  
Select  
> Settings>Internet>NetGuard.  
On to enable the Net Guard.  
Off to disable the Net Guard.  
Browsing the Web  
CreatingaBookmark  
Bookmarks allow you to store the address of your favourite  
websites for easy access at a later time.  
1. Launch the Web page you want to mark.  
2. Press right softkey to go to the browser menu.  
3. Select Markthispage>  
(left softkey).  
OK  
4. Press  
(left softkey).  
Save  
Note: Bookmarking a page does not store the page contents, just its  
address.  
Some pages cannot be bookmarked. Whether a particular Web  
page may be marked is controlled by its creator.  
119  
AccessingaBookmark  
1. Launch the Web and press right softkey to access the browser  
menu.  
2. Select ViewBookmarks.  
3. Highlight the bookmark you wish to access and press  
(left  
OK  
softkey).  
EditingaBookmark  
1. Access ViewBookmarks menu. (See Accessing a Bookmark”  
above.)  
2. Highlight the bookmark you wish to edit and press the right  
softkey.  
3. Select Edit.  
4. Edit the address or title, and press  
(left softkey).  
OK  
5. Press  
(left softkey).  
Save  
DeletingaBookmark  
1. Access ViewBookmarks menu. (See Accessing a Bookmark”  
shown above.)  
2. Highlight the bookmark you wish to erase and press right  
softkey.  
3. Select Delete>  
(right softkey).  
Yes  
GoingtoaSpecificWebsite  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select GotoURL... >InputAddress.  
3. Enter the URL of the website you wish to go to, and press  
OK  
(left softkey).  
Note: Not all websites are viewable on your phone.  
120  
ReloadingaWebPage  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select Refreshthispage.  
RestartingtheWebBrowser  
If the Web browser seems to be malfunctioning or stops  
responding, you can usually fix the problem by simply restarting  
the browser.  
TorestarttheWebbrowser:  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. SelectMore... > RestartBrowser.  
SendingaWebPage  
This feature allows you to send a URL (Web site address) youre  
viewing through text messaging.  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select SendPage.  
3. To complete and send a Web Page, follow steps 2-7 in  
Sending a Text Messageon page 105.  
AdjustingtheBrowserSoundVolume  
1. Launch the Web and press right softkey to display the browser  
menu.  
2. Select More... > Preferences > SoundVolume.  
3. Select your desired volume level by pressing the navigation  
key and press  
.
121  
Downloading through the Wireless Web  
Your phone allows you to download images (screen savers),  
ringers, games, etc., from a website.  
1. Select  
> MyContent.  
2. Select your desired data folder (for example, Games, Ringers,  
ScreenSavers, or Applications).  
3. Select GetNew to start up the browser.  
4. Select your desired image or ringer file, and follow the system  
prompts.  
Using Application Manager  
Your phone allows you to run multiple applications  
simultaneously. You can control applications using the  
Application Manager.  
TousetheApplicationManager  
1. Select  
> MyContent > ApplicationMgr.  
2. Select an application or an alert and press  
(right  
Options  
softkey) to display the following options:  
ViewAlert to display an alert screen.  
IgnoreAlert to ignore the alert.  
BringtoFront to display the application screen in the  
foreground.  
ExitApplication to close the application.  
LaunchNewApp to launch a new application.  
122  
14. Safety Guidelines  
Maintaining Your Phones Peak Performance  
Hold the phone with the antenna raised, fully extended, and  
over your shoulder.  
Try not to hold, bend, or twist the phones antenna.  
Dont use the phone if the antenna is damaged.  
Avoid exposing your phone and accessories to rain or liquid  
spills. If your phone does get wet, turn the power off and  
immediately remove the battery.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone  
without a hands-free device) is prohibited in some jurisdictions.  
Laws vary as to specific restrictions.  
Let the person you are speaking to know you are driving; if  
necessary, suspend the call in heavy traffic or hazardous  
weather conditions.  
Do not take notes or look up phone numbers while driving.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any  
special regulations in a given area. Turn your phone off in areas  
where use is forbidden or when it may cause interference or  
danger.  
123  
UsingYourPhoneNearOtherElectronicDevices  
Most modern electronic equipment is shielded from radio  
frequency (RF) signals. However, RF signals from wireless  
phones may affect inadequately shielded electronic equipment.  
RF signals may affect improperly installed or inadequately  
shielded electronic operating systems and/or entertainment  
systems in motor vehicles. Check with the manufacturer or their  
representative to determine if these systems are adequately  
shielded from external RF signals. Also check with the  
manufacturer regarding any equipment that has been added to  
your vehicle.  
Consult the manufacturer of any personal medical devices, such  
as pacemakers and hearing aids, to determine if they are  
adequately shielded from external RF signals.  
Note: Always turn off the phone in health care facilities and request  
permission before using the phone near medical equipment.  
Turning Off Your Phone Before Flying  
Turn off your phone or set your phone to Airplane mode before  
boarding any aircraft. To prevent possible interference with  
aircraft systems, Transport Canada regulations require you to  
have permission from a crew member to use your phone while  
the plane is on the ground.  
124  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn your phone  
off when in a blasting area or in other areas with signs indicating  
two-way radios should be turned off. Construction crews often  
use remote-control RF devices to set off explosives.  
Turn your phone off when youre in any area that has a  
potentially explosive atmosphere. Although its rare, your  
phone and accessories could generate sparks. Sparks can cause  
an explosion or fire, resulting in bodily injury or even death.  
These areas are often, but not always, clearly marked. They  
include:  
Any area where it is very humid and with inflammables.  
Fuelling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as  
grain, dust, or metal powders.  
Any other area where you would normally be advised to turn  
off your vehicles engine.  
Note: Never transport or store flammable gas, liquid or explosives in the  
compartment of your vehicle that contains your phone or accessories.  
125  
Restricting Childrens Access to Your Phone  
Your phone is not a toy. Do not allow children to play with it as  
they could hurt themselves and others, damage the phone or  
make calls that increase your telephone bill.  
Protecting Your Battery  
The guidelines listed below help you get the most out of your  
batterys performance.  
Use only approved batteries and chargers. These chargers are  
designed to maximize battery life. Using other batteries or  
chargers voids your warranty and may cause damage.  
In order to avoid damage, charge the battery only in  
temperatures that range from 0º C to 45º C (32º F to 113º F).  
Dont store the battery in a high humidity environment.  
Dont use the battery charger in direct sunlight or in high  
humidity areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Dont attempt to disassemble or short-circuit the battery.  
Dont store the battery in high temperature areas for long  
periods of time. Its best to follow these storage rules:  
Less than one month:  
-20º C to 60º C (-4º F to 140º F)  
More than one month:  
-20º C to 45º C (-4º F to 113º F)  
126  
Disposal of Lithium Ion (Li-Ion) Batteries  
For safe disposal options of your Li-Ion batteries, please ensure  
that disposal of this in accordance with law and regulation.  
Do not dispose of the battery in fire; the cell may explode.  
Do not open or puncture the battery; the released electrolyte  
is corrosive and may cause damage to the eyes and skin.  
SpecialNote: Be sure to dispose of your battery properly. In some  
areas, the disposal of batteries in household or business trash  
may be prohibited.  
Note: For safety, do not handle a damaged or leaking Li-Ion battery.  
Cautions  
Any changes or modifications to your phone not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this equipment.  
Only use approved batteries, antennas and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
phone warranty if said accessories cause damage or a defect to  
the phone.  
Although your phone is quite sturdy, it is a complex piece of  
equipment and can be broken. Avoid dropping, hitting, bending  
or sitting on it.  
127  
This product contains NetFront Browser of ACCESS CO., LTD. ACCESS and NetFront are trademarks or  
registered trademarks of ACCESS CO., LTD. in Japan and other countries. This software is based in part  
on the work of the Independent JPEG Group.  
The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by  
SANYO is under license. Other trademarks and trade names are those of their respective owners.  
128  
H
Headset Mode 48  
Holster 10  
Index  
Abbreviated Dialing 24, 47  
Airplane Mode 42  
Alarm Clock 77  
Alert Notification 32  
Animation 35  
Answering Calls 16  
Any Key Answer 45  
Audio Quality 86  
Auto Answer 45  
A
I
Icon Definition 5, 80  
In-Call Options 19  
K
Key Beep Volume 30  
Key Press Echo 32  
L
Language 25, 41, 45, 49  
Location Settings 39  
Lock Code 51  
Lock Mode 51  
Locking Your Phone 50  
B
Background 35  
Backlight 34  
Battery  
Charging 9  
Installing 8  
Removing 8  
Bluetooth 108  
Bookmarks 119  
M
Making Calls 13  
Menu Diagram 56  
Menu Style 34  
Message Notification 40  
Messaging 40, 104  
Missed Call Notification 18, 93  
My Content  
Accessing Menus 122  
Erasing 53  
My Favourites 44  
C
Calculator 79  
Calendar 36, 69  
Call Alarm 71  
Call History 58  
Call Memo 83  
Call Waiting 118  
Callback Number 41  
Canned Messages 25, 40  
Contacts 61  
N
Net Guard 119  
O
Open/Close Flip Option 46  
Countdown Timer 78  
P
D
Phone (illus.) 2  
Phone Number  
Dialing With Pauses 22  
Displaying 13  
Finding 21  
Dialing Options 15  
Display Screen Icons 5  
Display Settings 34  
E
Emergency Numbers 18  
Entering Text 25  
Saving 21, 22  
129  
R
V
Recording Mode 86  
Resetting Your Phone 54  
Restricting Calls 52  
Ringer Types 29, 102  
Roaming 55  
Vibrate Pattern 31  
Voice-Activated Dialing 81  
Voice Dial Tags  
Erasing 53, 82  
Playing 82  
Programming 81  
Voice Memo 83  
Voice Prompt 31  
Voicemail  
Clearing Message Icon 117  
Editing Number 117  
Notification 116  
Retrieving 117  
S
Safety 123  
Screen Call 17, 87  
Screen Saver 36  
Security Menu 50  
Setup Options 44  
Side Key Guard 49  
Silence All 33  
Volume Settings 30, 102  
Sleep Mode 38  
Sound Settings 29  
Special Numbers 52  
Speed Dialing 23, 66, 101  
Start-up/Power-off Tone 31  
Stop watch 78  
W
Web 119  
World Clock 79  
T
T9 Text Input 26  
Text Greeting 35  
Text Message 104, 105  
Three-Way Call 118  
To Do List 72  
Tone Length 31  
TTY 43  
Turning Your Phone On and Off 7  
U
Unlocking Your Phone 51  
130  
Notes  

West Bend SOHO SHCM100 User Manual
TRENDnet Computer Accessories TV IP312W User Manual
Sony Xperia micro 1265 2574 User Manual
Sony XDCAM HD PDW HD1500 User Manual
Sony Rechargable Battery Pack VGP BPSC31 User Manual
Sony Ericsson T226S User Manual
Seagate Barracuda ST320DM000 User Manual
Samsung SH R522C User Manual
Roberts Radio CR9926 User Manual
Philips AZ3856 User Manual