Online User’s Guide
Dual-Band PCS Phone
SCP-6400
2B. ControllingYourPhone’s Settings ....................................31
Adjusting the Phone’s Volume Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Selecting Ringer Types for Voice Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33
Selecting Ringer Types for Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Selecting Ringer Types for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Selecting a Tone Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34
Setting a Start-up/Power-off Tone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Using Voice Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
Silent Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Changing the Greeting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .37
Changing the Backlight Time Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Setting Font Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .38
Changing the LCD Color . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Changing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39
Setting the Display for Incoming Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Setting the Display for the Standby Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .40
Screen Savers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41
Changing the Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting Message Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
Setting Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Setting Auto Answer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting Headset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44
Setting My Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Changing the Menu Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .45
Position Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
Setting TTY Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .47
Unlocking the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Erasing the Internal Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .53
Erasing the Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Resetting Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Resetting and Locking Your Phone through SMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54
Security Features for PCS Vision . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Automating Your PCS Vision Password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
Signing In and Out of PCS Vision Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57
2D. ControllingYourRoamingExperience ................................59
Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60
Setting Your Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .61
Controlling Roaming Charges Using Call Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .62
2E. NavigatingThroughMenus ...........................................65
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66
Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67
2F. ManagingCallHistory ................................................69
Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .70
Making a Call From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Saving a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71
Prepending a Phone Number From Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72
Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .73
2G. Usingthe Internal Phone Book ........................................75
Internal Phone Book Entry Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Selecting a Character Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .76
Entering Characters Using T9 Text Input . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Adding a Word to the T9 Database . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .77
Entering Characters by Tapping the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .78
Using Smart Punctuation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
Entering Symbols, Numbers and Smile Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79
2C. SettingYourPhone’s Security .........................................49
Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Locking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50
Unlocking Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Locking the Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51
Adding a New Internal Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .80
Finding Internal Phone Book Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .81
Adding a Phone Number or Address to an Internal Phone Book Entry . . . . . . . . . . . . . . . . . .83
Editing an Internal Phone Book Entry’s Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83
Editing an Internal Phone Book Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .84
Selecting a Ringer/Image Type for an Entry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85
Secret Internal Phone Book Entries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Dialing PCS Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .86
Storing Special Numbers in the Phone Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .87
Using Different Dialing Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88
My PCS Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .89
Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .103
Downloading Files . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Downloading from Your PC with Multimedia Master . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .104
Viewing the Downloaded Ringer Data Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Erasing All Downloaded Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107
Downloading through Wireless Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Confirming the Downloaded Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .111
Viewing the Downloaded Data Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .116
2I. UsingYourPhone’s Voice Services ..................................119
Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Programming Voice Dial Tag to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
Erasing All Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .121
Recording Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
Memo Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .123
Erasing All Memos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .124
Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .125
2H. PersonalOrganizer ....................................................91
Managing Schedules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92
Adding an Event to the Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93
Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Event Alert Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Editing Events Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94
Adding a Call Alarm to the Scheduler . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Call Alarm Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95
Call Alarm Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Editing Call Alarms Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Erasing a Day’s Events or Call Alarms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .96
Going to Today’s Scheduler Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Adding To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .97
Viewing To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Editing To Do Items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Deleting To Do from the List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .98
Viewing Event, Call Alarm or To Do List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Purging All Events, Call Alarms or To Do List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .99
Personal Information Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100
Displaying User Address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Getting to know Icon Indication . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Displaying the Version Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .101
Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
Playing Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
SECTION3:UsingPCSService Features ...................129
3A. PCSService Features:The Basics ...................................131
Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Setting Up Your Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
Voicemail Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132
New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Retrieving Your Voicemail Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .133
Voicemail Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .134
Clearing the Message Icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .137
Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
3B. PCSVision ............................................................139
Browsing the Web on Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Launching the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Your User Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .140
Net Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .141
Browsing the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .142
Setting Up a Web Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .145
Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Message Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
PCS Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
New Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Message Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .146
Displaying Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
Changing the Displaying Font Size of a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .147
Message Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Extracting Phone Numbers From a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .148
Prepending a Phone Number From a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .149
Extracting E-Mail Addresses From a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Extracting URLs From a Message . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .150
Creating Folders for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .151
Adding a Folder for Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Moving a Message Into the Other Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .152
Editing Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
Erasing a Folder Including Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153
Erasing All Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
Signing Up for PCS Updates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .154
PCS Short Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Using PCS Short Mail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .155
Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Using PCS Email . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Accessing PCS Email Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Composing PCS Email Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Chat . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158
Ringers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .159
Screen Savers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .161
Games . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .163
PCS Business Connection Personal Edition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .164
PCS Vision FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .165
Making a Call With PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
Accessing Information Using PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .169
SECTION4:SafetyGuidelines andWarrantyInformation . . .171
4A. Safety ................................................................173
Getting the Most Out of Your Reception . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .174
Maintaining Safe Use of and Access to Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .175
Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .178
Acknowledging Special Precautions and the FCC Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . .179
Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
User Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .182
4B. Manufacturer’s Warranty ............................................183
Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .184
Index .......................................................187
3C. PCSVoice Command .................................................167
Getting Started With PCS Voice Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Creating Your Own Address Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .168
Welcome to Sprint
print built the largest all-PCS nationwide network with advanced
Smultimedia services and clear calls, reaching more than 230 million
people for clarity you can see and hear. We built our network to give you what
we believe you really want from a wireless phone, clear sound, private
conversations and time-saving features.
But with Sprint, you can do something even more far-reaching – simplify
your life. Our advanced technology is designed to grow with your
communications needs so that one day you’ll be able to rely entirely on your
PCS Phone to stay connected.
This guide will familiarize you with our technology and with your new
PCS Phone through simple, easy-to-follow instructions. If you have already
reviewed the Start Here Guide, which was packaged with your new phone,
then you’re ready to explore the advanced features outlined in this guide.
If you have not read your Start Here Guide, go to Section One - Getting Started.
This section provides all the information you need to quickly activate
your phone, set up your voicemail and much more. It also contains
information on how to contact Sprint should you have questions about
service, want to purchase additional products or services, or just to check your
account balance.
Thank you for choosing Sprint.
1
Introduction to this
Online User’s Guide
his Online User’s Guide introduces you to PCS Service and all the features
Tof your new phone. It’s divided into four sections:
ᮣ
ᮣ
ᮣ
ᮣ
Section 1: Getting Started
Section 2: Understanding Your Phone
Section 3: Using PCS Service Features
Section 4: Safety and Warranty Information
Throughout the guide, you’ll find tips that highlight special shortcuts
and timely reminders to help you make the most of your new phone and
service. The Table of Contents and Index will help you locate specific
information quickly.
You’ll get the most out of your phone if you read each section. However, if
you’d like to get right to a specific feature, simply turn to that page. Follow the
instructions in that section and you’ll be ready to use your phone in no time.
Tip: You can print out this guide to keep on hand or view it online. If
you’re viewing it online, simply click on a topic in the Table of Contents
or on any page reference within a section to go directly to that topic.
2
3
Section 1
Getting Started
Section 1
Getting Started
4
5
Section 1A
Setting Up Service
In This Section
ᮣ
ᮣ
ᮣ
Getting Started With PCS Service
Setting Up Voicemail
Getting Help
his section walks you through the basics of setting up service for
Tyour PCS Phone, including unlocking and activating your phone,
setting up your voicemail and how to contact Sprint for assistance with
your PCS Service.
Section 1: Getting Started
1A: Setting Up Service
6
7
GettingStartedWithPCSService
SettingUpYourVoicemail
All unanswered calls to your PCS Phone are automatically transferred to
voicemail, even if your phone is in use or turned off. Therefore, you will
want to set up your voicemail and personal greeting as soon as your
PCS Phone is activated.
Determine if Your Phone is Already Activated
If you received your phone in the mail or purchased it at a Sprint Store, it
probably has been activated. All you need to do is unlock your phone.
If your phone is not activated, please refer to the Start Here Guide included
with your phone.
To set up voicemail:
1. Press and hold
.
Unlocking Your Phone
2. Follow the system prompts to create your pass code, record your
greeting, record your name announcement and choose whether to
activate One-Touch Message Access (a feature that lets you press one
key to access messages and bypasses the need for you to enter your
pass code).
Follow these steps to unlock your phone:
1. Press and hold
to turn the phone on.
2. When “Locked” or “Full Locked” is shown on the display, press
Unlock
(left softkey).
3. Enter your four-digit lock code. For security purposes, the code is not
Note: The voicemail setup process may vary in certain Affiliate areas.
visible as you type.
GettingHelp
Visiting Our Web Site
Tip: If you can’t recall your lock code, try using the last four digits of
either your Social Security number or PCS Phone Number or try 0000.
If none of these work, call PCS Customer Service Solutions at
1-888-211-4PCS (4727).
PCS Services, options and more.
Activating Your Phone
You can also:
To activate your phone, follow the directions in the Start Here Guide that
activate your phone online.
ᮣ
Review coverage maps
ᮣ
Learn how to use voicemail
ᮣ
Access your account information
ᮣ
Purchase accessories
ᮣ
Add additional options to your service plan
ᮣ
Check out frequently asked questions
ᮣ
And more
Section 1: Getting Started
1A: Setting Up Service
Section 1: Getting Started
1A: Setting Up Service
8
9
PCS Customer Service Solutions
Section 2
Claire, your virtual service representative is available to assist you 24
on and clicking on Claire’s Directory for Service Solutions.
Receiving Automated Invoicing Information
For your convenience, your phone gives you access to invoicing
information on your PCS Account. This information includes balance
due, payment received, invoicing cycle and the amount of minutes and/or
data used since your last invoicing cycle. (A nominal fee and/or airtime
charges may apply.)
Understanding Your
Phone
To access this information:
ᮣ
Press
.
Note: This service may not be available in all Affiliate markets.
PCS Directory Assistance
PCS Directory Assistance provides a variety of services, including
residential, business and government listings; assistance with local or
long-distance calls; movie listings; hotel, restaurant and shopping
information and major local event information. There is a per-call charge
and you will be billed for airtime.
ᮣ
Press
.
PCS Operator Services
PCS Operator Services can provide assistance in placing collect calls or
calls billed to a local telephone calling card or a third party.
ᮣ
Press
.
For more information or to see the latest in products and services, visit us
Note: PCS Operator Services may not be available in all
Affiliate markets.
Section 1: Getting Started
10 1A: Setting Up Service
Section 2
Understanding Your Phone 11
Section 2A
Your PCS Phone: The Basics
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Front View of Phone
Viewing the Display Screen
Features of Your Phone
Turning Your Phone On and Off
Using the Battery and Charger
Displaying Your Phone Number
Making and Answering Calls
our PCS Phone is packed with features that simplify your life and expand
Yyour ability to stay connected to the people and information that are
important to you. This section will guide you through the basics of your
phone and you’ll be on your way to using it in no time.
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 13
12
Your Phone’s Features
FrontView ofPhone
1. HeadsetJack: Insert the plug of the headset (must be purchased
separately) for hands-free listening.
11. LED
(green/red light)
2. Softkey(left): Lets you select the menu corresponding to the bottom
left line on the LCD.
1. Headset
Jack
3. Navigationkey: Lets you navigate quickly and easily through the
menu options. Press or key for following volume settings;
Adjusting the ringer volume in standby mode and the receiver volume
while the phone is in use. Muting the ringer while the phone is ringing.
From the standby mode, press or for shortcut.
Sprint
Oct 14, 02(Mon)
12:30pm
10. LCD (display)
Web
MSG
4. TALK: Lets you place a call, receive a call, answer Call Waiting, use
Three-Way Calling and Voice Dial.
2. Softkey
(left)
9. Softkey
(right)
5. Menu/OK: Lets you see the phone’s menus, select menu options.
6. Memokey: Long press for Memo recording, and short press for Memo
option in the Standby mode. Long press for Screen Call start, and short
press for ringer off when receiving incoming calls. Long press for Memo
recording while the phone is in use.
3. Navigation
key
4. TALK
8. END/POWER
5. Menu/OK
7. Back: Allows you to clear characters from the screen, mute ringer
when receiving incoming calls, back up menu levels or display
Time/Date while the phone is in use.
Long press for Key Guard setting in the Standby mode.
8. END/POWER: Lets you disconnect a call and return to Standby mode.
Lets you mute ringer when receiving incoming calls. Long press for
turning the phone ON and OFF.
6. Memo
7. Back
9. Softkey(right): Lets you select the menu corresponding to the bottom
right line on the LCD.
10. LCD(display): Displays the phone’s main menus, features, mode, etc.
11. LED(redlight): Incoming Call = Green light/Notification (Message,
Voicemail or Alerts, etc.) = Red light.
Section 2: Understanding Your Phone
14 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 15
Viewingthe DisplayScreen
Features ofYourSCP-6400
Thislistidentifiesthesymbolsyou’llseeonyourdisplayscreen.
Congratulations on the purchase of your PCS Phone SCP-6400. This
phone is lightweight, easy-to-use, reliable and offers many significant
features and service options:
ᮣ
shows your current signal strength. The more lines you have,
the stronger your signal.
ᮣ
Dual-band capability provides access to other PCS digital and
analog networks where Sprint has implemented roaming
agreements (pages 60-61).
ᮣ
means your phone cannot find a signal.
ᮣ
tells you a call is in progress.
PCS VisionSM provides access to the wireless Internet in digital mode
(pages 139-165).
PCS Mail and Web Short Mail provide quick and convenient text
messaging capabilities (pages 155-157).
PCS Connection Kit offers wireless modem capabilities for your
personal computer in digital mode (page 145).
PCS Voice CommandSM lets you dial phone numbers by speaking
someone’s name or the digits in their phone number
(pages 167-169).
Downloadable ringers allow you to personalize your phone with
distinct ringers (pages 159-160).
The built-in scheduler lets you schedule alerts to remind you of
important events (pages 93-99).
Speed Dialing lets you call the phone number stored in the Phone
Book by one touch dialing (pages 88-89).
Phone Book can store up to 300 names, 500 phone numbers,
300 email addresses and 300 web addresses. Each entry can contain
7 phone numbers, 1 Email, 1 Web, Ringer and Image (section 2G).
ᮣ
indicates the PCS Vision access is dormant.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
indicates the PCS Vision access is active.
ᮣ
indicates the PCS Vision access is disabled.
ᮣ
indicates you have text messages waiting.
ᮣ
indicates you have voicemail messages waiting. Press and hold
to call your voicemail box.
ᮣ
indicates you have text messages and voicemail messages
waiting.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
indicates you are “roaming” off the Sprint Nationwide PCS
Network.
ᮣ
shows the level of your battery charge. The more black you see,
the more power you have left. It turns
while charging.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
indicates you have menus to scroll (in four directions).
indicates the vibrate feature is set to ON.
indicates the Location Service of your phone is enabled.
indicates the Location Service of your phone is disabled.
indicates you have new caller’s message.
indicates the Screen Call Auto setting is ON.
indicates you have new downloaded data.
Tip: Display indicators let you know when you’re off the Sprint Nationwide
PCS Network and whether you’re operating in digital or analog mode.
Section 2: Understanding Your Phone
16 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 17
When the battery reaches 95% of its capacity, the battery icon
When there are approximately five minutes of talk time left, the phone
sounds an audible alert every 30 seconds and then powers down.
appears.
TurningYourPhone ONandOFF
Turning Your Phone ON
To turn your phone on, press and hold
.
Note: Long backlight settings, searching for service, vibrate mode and
browser use affect the battery’s talk and standby times.
Once your phone is ON, it displays “Looking for service...” indicating that
your phone is searching for a signal. When your phone finds a signal, it
automatically enters Standby mode – the phone’s idle state. At this point,
you are ready to begin making and receiving calls.
Tip: Be sure to charge your phone’s battery and watch your indicator to
ensure your levels are okay.
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. When a signal is found, your
phone automatically returns to Standby mode.
Installing the Battery
Your PCS Phone comes with a LiIon battery. Follow these steps to install it:
1. Place the battery into the space beneath the antenna with the metal
contacts at the bottom, facing downward.
In Power Save mode, your phone searches for a signal periodically without
your intervention. You can also initiate a search for PCS Service by pressing
any key (when your phone is turned ON).
2. Gently press down until it’s in place and the battery release latch snaps.
Tip: The Power Save feature helps to conserve your battery power when
you are in an area where there is no signal.
Turning Your Phone OFF
Press and hold
display screen.
until you see the powering down animation on the
Removingthe Battery
Your screen remains blank while your phone is off (unless the battery
is charging).
To remove your battery for charging, or for any other reason, follow these
easy steps:
Usingthe Battery
Battery Capacity
1. Make sure the power is off so that you don’t lose any stored numbers
or messages.
Your PCS Phone is equipped with a Lithium Ion (LiIon) battery.
It allows you to recharge your battery before it is fully drained. The battery
provides approximately 2.5 hours of continuous digital talk time
(70 minutes in analog) or approximately 10 days of continuous digital
standby time (15 hours in analog).
2. Press up the battery release latch and hold the battery.
3. Then pull it up and out at a 45-degree angle.
Section 2: Understanding Your Phone
18 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 19
Charging the Battery
DisplayingYourPhone Number
Just in case you forget your phone number, your PCS Phone can
remind you.
Your PCS Phone comes with a rechargeable battery. You should charge the
battery as soon as possible so you can begin using your phone.
Keeping track of your battery’s charge is important. If your battery level
becomes too low, your phone automatically turns off and you will lose all
the information you were just working on. For a quick check of your
phone’s battery level, glance at the battery charge indicator located in the
upper-right corner of your phone’s display screen. If the battery charge is
To display your phone number:
1. From the Standby mode, press
2. Highlight Phone Info and press
3. Highlight MyPhone# and press
to display the main menu.
.
.
getting too low, the battery icon
warning tone.
appears and the phone sounds a
MakingandAnsweringCalls
Always use a Sprint-approved desktop charger, travel charger or vehicle
power adapter to charge your battery.
MakingCalls
Warning! Using the wrong battery charger could cause damage to your
Your PCS Phone offers many different ways to make calls, including
PCS Voice CommandSM (pages 167-169), Speed Dialing (pages 88-89) and
using Call History (pages 69-73).
phone and void the warranty.
Using the Travel Charger
To make a call using your keypad:
To use the travel charger provided with your phone:
Use only an approved charger with your phone.
1. Make sure your phone is on.
2. Enter a phone number. (If you make a mistake while dialing,
1. Plug the Travel Charger into a wall outlet.
press
to erase one digit at a time. Press and hold
to erase
2. Plug the other end into the Travel Charger into the bottom of your
phone, with the battery installed.
the entire number.)
3. Press (To make a call when you are roaming and Call Guard is
enabled, press , highlight RoamCall and press .)
4. When you’re finished, press
ᮣ
Charging when your phone is turned on:
The battery icon
appears on the display while charging.
when charging is complete.
Charging when your phone is turned off:
.
The battery icon turns to
ᮣ
Tip: To redial your last outgoing call, press
twice.
The battery icon
appears, and the message “BATTERY
Tip: When making calls off the enhanced Sprint Nationwide PCS
Network, always dial using 11 digits (1 + area code + phone number).
CHARGING-Power Off-” is shown on the display while charging.
When the battery is completely discharged, you may wait for several
minutes until the message is shown on the display. The battery icon
turns to
, and message changes to “CHARGING COMPLETE-
Power Off-” when charging complete.
It takes approximately 3.0 hours to fully recharge a completely rundown
battery. With the Sprint-approved LiIon battery, it is okay to recharge the
battery before it becomes completely run down.
Section 2: Understanding Your Phone
20 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 21
AnsweringCalls
ChangingRingerVolume
To change the ringer volume, adjust or ofthe Navigation key when
the phone is in Standby mode.
1. Make sure your phone is on. If your phone is off, incoming calls go
to voicemail.
Note: To change the ringer volume from the main menu, see “Adjusting
2. When a call comes in, answer the call by pressing
your settings, your PCS Phone notifies you of incoming calls in the
following ways:
. Depending on
the Phone’s Volume Settings” on page 32.
AdjustingVolume Duringa Conversation
ᮣ
The phone rings or vibrates.
Whether you need to hear more or less of a conversation, adjust or
of the Navigation key during a call.
ᮣ
The LED flashes.
ᮣ
The backlight illuminates.
Mutinga Call
ᮣ
The screen displays an incoming call message.
ᮣ
There are times when it’s necessary to mute a call so that your caller does
not hear you or certain background noise.
If available, the phone number of the caller is displayed.
ᮣ
If the phone number is in your Internal Phone Book, the Phone Book
entry’s name is displayed.
To use this function during a call:
ᮣ
Press
highlight Mute and press
. When the phone is
,
The following options are also displayed by pressing
. To select an
muted, “Mute” appears on the display.
option, highlight it and press
.
ᮣ
CallGuard to answer the call when you are in roaming.
To unmute a call:
See “Call Guard” on pages 62-63.
ᮣ
Press
highlight Unmute and press
.
,
ᮣ
ᮣ
Answer to answer the call.
MissedCallNotification
Skip to hang up the incoming call and return to Web while you are in
the Web operation. (This feature appears when the PCS Vision access is
dormant.)
When an incoming call is not answered, the Missed Call log is displayed
on your screen.
To display the Missed Call entry:
ᮣ
ᮣ
ScreenCall to answer the call by using pre-recorded announcement.
(This feature appears when you are in Sprint Service area or digital
roaming area.) See page 125 for setting up.
ᮣ
View
Press
(left softkey).
Unlock
If the phone is locked, you need to press
enter the lock code and press (left softkey).
(left softkey), then
QuietRinger to mute the ringer. (This feature appears when the ringer
View
is set.)
To dial the Missed Call entry’s phone number:
To answer a call when you are roaming and Call Guard is enabled, you
must press , highlight Answer and press to answer the call.
See “Call Guard” on pages 62-63.
ᮣ
Highlight the entry and press
.
Note: If your phone is off, incoming calls go to voicemail.
3. To disconnect the call, press
.
Section 2: Understanding Your Phone
22 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 23
CallingEmergencyNumbers
In-CallOptions
You can place calls to 911 (dial
and press
),
During a call, your phone displays menu options by pressing
.
even if your phone is locked or your account is restricted. Once the dial is
made, you will enter Emergency Mode. The phone tries to dial to 911
automatically until the dial will be connected. While you are in the
Emergency Mode, all phone calls can be received.
To select an option, highlight it and press
.
ᮣ
Mute or Unmute
Select Mute to mute your phone’s microphone. Select Unmute to
reactivate the microphone.
To exit from the Emergency mode, follow these instructions:
ᮣ
ᮣ
1. Press
.
Three -WayCall to call a third party.
2. Press
to display the options.
Flash to answer an incoming Call Waiting call or connect a third party
during Three-Way Calling.
3. Highlight ExitEmergency and press
.
ᮣ
ᮣ
ᮣ
CallHistory to use like a main menu. (See “Managing Call History” on
pages 69-73.)
DialingOptions
Dialing options are displayed when you press
numbers in the Standby mode.
after entering
Phone Book to use like a main menu. (See “Using the Internal Phone
Book” on pages 75-89.)
To select an option, highlight it and press
.
Messaging to use like a main menu. (See “Messaging” on
pages 146-154.)
ᮣ
Call to dial the phone number. (If you are roaming and have the Call
Guard feature activated, you need to take extra step. See “Call Guard” on
pages 62-63.)
ᮣ
ᮣ
Voicemail to use like a main menu. (See pages 132-136.)
ᮣ
ᮣ
ᮣ
ᮣ
Save Phone# to save the phone number in your Internal Phone Book.
(See “Saving a Phone Number” on pages 26-27.)
H HardPause to insert a hard pause. (See “Dialing and Saving Phone
Numbers With Pauses” on page 28.)
T 2-SecondPause to insert a 2-second pause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 28.)
Hyphen to insert a hyphen manually where you like, however they are
mainly for show.
Settings to use like a main menu. (See “Controlling Your Phone’s
Settings” on pages 31-47.)
ᮣ
Calendar to use like a main menu. (See “Calendar” menu instructions
on pages 92-99.)
ᮣ
ᮣ
Voice Services to use like a main menu. (See pages 119-127.)
Phone Info to use like a main menu. (See pages 100-101.)
Note: Flash menu appears in Call Waiting and Three-Way Call.
Mute menu does not appear during a 911 call.
Three-Way Call Menu does not appear in Roaming area.
Tip: To speed dial a phone number from the Standby mode, press and hold
appropriate speed dial key locations 2-9. See pages 88-89 for setting. (This
feature will not work when you are roaming and Call Guard is enabled.)
This option appears when you enter 4-digit and press
.
ᮣ
Abbrev.Dialto dial the phone number in your Internal Phone Book that
ends with the four digits you enter. (See “Four-Digit Dialing” on page 28.)
This option appears when you enter more than 4-digit and press
.
ᮣ
Find to display Internal Phone Book entries that ends with the digits
you enter. (See “Finding a Phone Number” on page 27.)
Section 2: Understanding Your Phone
24 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 25
End-of-CallOptions
5. Enter a Name, and press
. (See “Selecting a Character Input
Mode” on pages 76-77.) Or you can also save the phone number
After receiving a call from or making a call to a phone number that is not
in your Internal Phone Book, the phone number and the duration of the
call is displayed. You can display the following menu options by pressing
within 10 seconds after disconnecting the call.
without a name by pressing
highlighting Yes and then pressing
from the name entry display,
. If you have any already
stored entries in the Phone Book, you are prompted to select the
following entry modes:
To select an option, highlight it and press
.
ᮣ
ᮣ
New Name to enter a name directly.
ᮣ
CallAgain to dial the phone number.
FromPhone Book to select a name from Phone Book entry list.
ᮣ
Save Phone# to save the phone number in your Internal Phone Book.
(See “Saving a Phone Number” on pages 26-27.)
Save
6. Press
(left softkey).
After receiving a call from or making a call to a phone number that is in
your Internal Phone Book, the Phone Book entry name, phone number
and the duration of the call are displayed. You can display the following
After you have saved the number, the new Internal Phone Book entry is
displayed. (See “Internal Phone Book Entry Options” on page 76.)
Findinga Phone Number
menu options by pressing
the call.
within 10 seconds after disconnecting
Your phone searches the phone number in your Internal Phone Book that
ends with the digits you entered.
To select an option, highlight it and press
.
ᮣ
CallAgain to dial the phone number.
To find a phone number:
ᮣ
Alternate to save the other phone number into the same entry in your
Internal Phone Book.
1. Enter four or more digits and press
enter, the more specific the search becomes.
. The more numbers you
Note: The End-of-Call options are not displayed for calls identified as
No ID or Restricted.
2. Highlight Find and press
.
3. The Phone Book entry list that ends with the digits you entered appears.
Savinga Phone Number
4. Highlight your desired entry.
Press
Press
to display the entry details.
to dial.
Your PCS Phone can store a total of 500 phone numbers in 300 Internal
Phone Book entries. Each Phone Book entry can store 7 phone numbers,
and the entry’s name can contain 16 characters. Your phone
automatically sorts the Internal Phone Book entries alphabetically.
To save a number from the main menu:
1. Enter a phone number.
2. Press
3. Highlight Save Phone# and press
4. Select a label by highlighting Home, Work, Mobile, Pager, Data, Fax
or NoLabel and press
.
.
.
Section 2: Understanding Your Phone
26 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 27
DialingandSavingPhone Numbers WithPauses
DialingFromthe InternalPhone Book
You can dial or save phone numbers with pauses for use with automated
systems, such as voicemail or credit card billing numbers. If you select a
1. From the Standby mode, press
to display the main menu.
2. Highlight Phone Book and press
.
hard pause, the next set of numbers are sent when you press
. If you
3. Highlight FindName and press
.
select a 2-second pause, your phone automatically sends the next set of
numbers after two seconds.
ᮣ
Press right of the Navigation key for the shortcut (steps 1 through 3).
Note: You can have multiple pauses in a phone number and combine
2-second and hard pauses.
4. Use your Navigation key to scroll through the Phone Book list and
highlight one of the appropriate entries and press
.
5. Select the box under your desired memory location by scrolling.
To dial or save phone numbers with pauses:
Options
6. Press
(right softkey) for the menu options.
1. Enter the phone number and press
.
7. Highlight your desired feature and press
.
2. Highlight either HardPause or 2-SecondPause and press
.
Hard Pauses are displayed as a “H” and 2-second pauses as a “T”.
UsingOne-TouchSpeedDialing
3. Enter additional numbers.
With this feature, you can dial Speed Dial entries using one key press for
locations 2-9. (See pages 88-89 for storing a speed dial number.)
4. Press
the number in your Internal Phone Book and press
When dialing a number with a hard pause, press
, highlight Call to dial the number or Save Phone# to save
.
To use One-TouchDialing for Speed Dial locations 2-9:
and highlight
ᮣ
Press and hold the appropriate key for few seconds.
The display confirms that the number has been dialed when it shows
“Connecting...”.
SendTone and press
to send the next set of numbers.
Four-DigitDialing
Enter four digits and press
to display the 4-Digit Dialing option.
If you select Abbrev. Dial, your phone dials the phone number in your
Internal Phone Book that ends with the four digits you entered.
See page 44 for setting this feature.
To use 4-Digit Dialing:
1. Dial the last four digits of an Internal Phone Book entry’s phone
number.
2. Press
to display the menu options.
or
3. Highlight Abbrev. Dial and press
.
Note: 4-Digit Dialing dials the first number in your Internal Phone Book
that matches the four digits.
Section 2: Understanding Your Phone
28 2A: Your PCS Phone – The Basics
Section 2: Understanding Your Phone
2A: Your PCS Phone – The Basics 29
Section 2B
Controlling Your Phone’s
Settings
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Volume Settings
Ringer Types
Selecting Tone Length
Alert Notification
Silent Mode
Changing the Greeting
Changing the Backlight Settings
Changing the Display Screen
Screen Savers
Changing the Contrast
his section describes how you can change your phone’s settings to best suit
Tyour requirements. Take a few moments to review these options and add
or adjust the settings that are right for you.
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 31
30
Adjustingthe Phone’s Volume Settings
RingerTypes
To change the ringer/key volume:
Ringer types help you identify incoming calls and messages. You can
assign ringer types to individual phone book entries, types of calls and
types of messages.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
to display the main menu.
.
ᮣ
PreprogrammedRingers include a variety of standard ringer types and
.
familiar music.
4. Highlight Ringer/KeyVol. and press
.
ᮣ
VibratingRinger alerts you to calls or messages without
5. Select the menu under each item and press
.
disturbing others.
ᮣ
ᮣ
RingerVolume for adjusting Ringer tone volume.
Start-up/Pw-off for adjusting Start-up/Power-off tone volume.
KeyBeep for adjusting Key Beep tone volume.
Ringers andScreenSavers (Images) can be downloaded right to your
phone. (See “Ringers” on page 159 and “Screen Savers” on page 161.)
ᮣ
ᮣ
SelectingRingerTypes forVoice Calls
6. Highlight your desired volume level and press
.
Your PCS Phone provides a variety of ringer options which allow you to
customize your ring and volume settings.
ᮣ
RingerOff to set the Voice Call ringer volume to off.(Only appears in
Ringer Volume Setting).
To select a ringer type for voice calls so you recognize when a certain type
of call is coming in by the ringer:
ᮣ
Silence All to set all the ringer volume to off. (Only appears in Ringer
Volume Setting). See “Silent Mode” on page 37.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight RingerType and press
5. Highlight Voice Calls and press
to display the main menu.
To adjust Earpiece volume:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
to display the main menu.
.
.
.
.
.
4. Highlight ReceiverVolume and press
5. Select your desired volume level and press
.
6. Select the menu under WithCallerID, NoCallerID or Roaming and
press
.
.
Tip: You can adjust the ringer volume in Standby mode or the earpiece
volume during a call by using the of the Navigation key.
/
7. Highlight your desired ringer type and press
.
ᮣ
GetNew: start up a Browser and you can select an item to download.
(See page 159.)
Section 2: Understanding Your Phone
32 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 33
SelectingRingerTypes forVoicemail
3. Highlight Sounds and press
.
To select a ringer type for voicemail:
4. Highlight Others and press
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight RingerType and press
5. Highlight Voicemail and press
to display the main menu.
5. Select the menu under Tone Length press
6. Highlight Short or Long and press
.
.
.
.
Settinga Start-up/Power-offTone
1. Follow the previous steps 1 to 4.
.
.
2. SelectthemenuunderStart-upTone orPower-offTone andpress
.
6. Select the menu under Voicemail and press
.
.
3. Highlight your desired option and press
.
ᮣ
7. Highlight your desired ringer type and press
GetNew: start up a Browser and you can select an item to download.
(See page 159.)
ᮣ
GetNew: start up a Browser and you can select an item to download.
(See page 159.)
Tip: The volume of Start-up Tone and Power-off Tone can be set the
volume setting. See page 32 for instructions.
SelectingRingerTypes forMessages
To select a ringer type for messages:
UsingVoice Prompt
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight RingerType and press
5. Highlight Messaging and press
to display the main menu.
This feature allows you to hear voice prompts at Voice Memo, Screen Call
setting or Voice Dial, etc. (Default Setting is On).
.
To deactivate this feature:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Others and press
to display the main menu.
.
.
.
.
6. Select the menu under Messaging and press
.
.
7. Highlight your desired ringer type and press
.
5. Select the menu under Voice Prompt and press
6. Highlight Off and press
.
ᮣ
GetNew: start up a Browser and you can select an item to download.
(See page 159.)
.
Selectinga Tone Length
Longer tone lengths may be better for tone recognitions when dialing
voicemail or other automated systems.
Tip: When ringer volume is set to “Silence All”, voice prompts cannot be
heard.
To select a tone length:
1. From the Standby mode, press
to display the main menu.
2. Highlight Settings and press
.
Section 2: Understanding Your Phone
34 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 35
AlertNotification
SilentMode
Your phone comes with several different options to keep you aware of
what’s going on by sounding the alert or ringer.
There may be times when you need to silence your phone entirely. The
phone’s Silent Mode allows you to mute all sounds without turning your
phone off.
ᮣ
Service sets alert On or Off for network services parameter changes.
ᮣ
ᮣ
ᮣ
To change your phone’s Silent Mode:
Voicemail sets alert to notify you of caller’s message(s).
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
to display the main menu.
Messaging sets alert to notify you of text message(s).
.
Minute Beep sets a minute reminder that beeps ten seconds before the
end of each minute during a call.
.
ᮣ
SignalFade sets alert to notify you when your phone loses a signal
during a call.
4. Highlight Ringer/KeyVol. and press
5. Select the menu under RingerVolume and press
6. Highlight Silence All and press
.
.
To set the alerts:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight Alerts and press
to display the main menu.
Tip: When Ringer Volume is set as Silence All, other items are changed
to Off and cannot be highlighted by cursor.
.
.
Changingthe Greeting
The greeting can be up to 15 characters and is displayed on the first line of
your phone’s display screen in Standby mode.
.
5. Highlight your desired option and press
.
6. If you selected Service, Minute Beep or SignalFade, select On or Off.
To change your greeting:
If you selected Voicemail or Messaging, select Once, RepeatAlert or
Off.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Greeting and press
to display the main menu.
.
Tip: Repeat Alert sounds every two minutes for twenty minutes.
.
.
5. Select either Username or Custom and press
.
ᮣ
Username to display the username when you are signed in.
ᮣ
Custom to customize the greeting by entering characters (Press
to erase single character, press and hold
pages 76-80 for the entering method.)
to erase entire entry. See
6. Press
.
Note: When Calendar or Screen Saver is set for StandbyDisplay, greeting is
not displayed.
Section 2: Understanding Your Phone
36 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 37
Changingthe BacklightTime Length
The backlight setting lets you select how long the display screen and
keypad are backlit after any key press is made.
Changingthe LCDColor
To change the LCD color setting:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight LCDColor and press
5. Select your desired color and press
to display the main menu.
To change the backlight setting:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Backlight and press
to display the main menu.
.
.
.
.
.
.
Changingthe DisplayScreen
5. Select Always On, Always Off or your defined time length and press
.
This feature lets you display the animation as a display for Outgoing Calls
or Service Search.
ᮣ
Always Off always turns the Backlight off.
To assign the Animation:
ᮣ
Always On always turns the Backlight on.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Animation and press
to display the main menu.
Note: Always On settings returns to previous value on next power cycle.
.
Note: Long backlight settings affect the battery’s talk and standby times.
.
.
SettingFontSize
There are four font size settings for the message notification and browser.
To change the font size, follow these steps:
5. Highlight OutgoingCalls or Service Search and press
.
ᮣ
Preview
Press
(right softkey) to see an example display.
6. Select the menu under the item and press
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight FontSize and press
to display the main menu.
7. Highlight your desired option and press
.
.
ᮣ
GetNew: start up a Browser and you can select an item to download.
.
(See page 161.)
.
To deactivate this feature, select Off at the step 7 above.
5. Highlight either Notifications or Browser and press
.
6. Select your desired font size.
ᮣ
Preview
Press
(right softkey) to display a font size example.
7. Press
to set the selected font.
Tip: From the font example display, you can see the larger/smaller font
displays by pressing right/left of the Navigation key.
Section 2: Understanding Your Phone
38 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 39
ᮣ
WorldClock displays the time of the selected country along with the
local time. You can scroll the World Clock list by pressing right/left of
Summer
Settingthe DisplayforIncomingCalls
You can set the downloaded image (screen saver) data to be shown on the
Incoming Calls display.
the Navigation key for changing country,
(left softkey) /
Standard
(right softkey) for changing between summer and standard
Follow these steps:
time if applicable. The “ ” icon indicates the summer time.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
to display the main menu.
Tip: You can also display the World Clock from Tools/Extras menu. See
“Using the World Clock” on page 103.
.
ᮣ
.
Off sets this feature to Off.
4. Highlight IncomingCalls and press
.
6. After following each system prompt or confirming the preview display,
press
to save the setting.
5. Select the menu under IncomingCalls and press
.
6. Highlight your desired downloaded image (screen saver) and press
ScreenSavers
Your new PCS Phone offers you the option of displaying a screen saver
while in Standby mode.
.
ᮣ
GetNew: start up a Browser and you can select an item to download.
(See page 161.)
To assign a screen saver:
ᮣ
If you select the downloaded image (screen saver) data at the step 6
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
to display the main menu.
Preview
above, press
(right softkey) to see an example display.
.
Note: PCS Connection kit must be purchased separately for downloading
the data from PC.
.
4. Highlight StandbyDisplay and press
.
Settingthe Displayforthe StandbyMode
5. Select ScreenSaver and press
.
This feature enables you to select a variety of items to display on the
Standby mode.
6. Select the menu under ScreenSaver and press
.
7. Highlight your desired screen saver, and press
.
Follow these steps:
ᮣ
GetNew: start up a Browser and you can select an item to download.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
to display the main menu.
(See page 161.)
.
ᮣ
Preview
Press
(right softkey) at the step 7 above to see an example
display.
.
Save
8. Press
(left softkey) to save the screen saver.
4. Highlight StandbyDisplay and press
.
5. Select your desired item and press
.
Tip: In no service area, Screen Saver, Calendar, Time (Large) or
World Clock cannot be shown on the Standby display.
ᮣ
ScreenSaver selects the screen saver to display.
Calendar displays the Calendar.
ᮣ
ᮣ
Time (Large) displays the local time in a large, simple format.
Section 2: Understanding Your Phone
40 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 41
Changingthe Contrast
SettingAnyKeyAnswer
Toadjustthecontrastonthephone’sdisplay:
This feature allows you to answer incoming calls by pressing any key
(except
,
,
,
and Navigation key).
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
4. Highlight Contrast and press
to display the main menu.
To activate this feature:
.
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
to display the main menu.
.
.
5. Select your desired setting and press
.
.
4. Highlight AnyKeyAnswer and press
5. Select On and press
.
SettingMessage Notification
You can see message notification when you receive Text message or
Voicemail while you are in PCS Vision applications or Browser mode.
.
To deactivate this feature, select Off at the step 5 above.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Messaging and press
to display the main menu.
SettingAutoAnswer
This feature sets the phone to automatically pick up after 5 or 15 seconds.
.
.
This feature works with the hands-free car kit and headset (must be
purchased separately).
4. Check the box next to Games/Apps or Browser.
ᮣ
Info.
Press
(right softkey) at the step 4 above to see the Messages
To activate this feature:
information.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
to display the main menu.
SettingAirplane Mode
This feature shuts all Incoming Calls and Outgoing Calls and 911 dialing
to prevent interference with aircraft electronics.
.
.
4. Highlight AutoAns.Car/HS and press
.
To set Airplane mode:
5. Select either 5Seconds or 15Seconds and press
.
1. From the Standby mode, press
to display the main menu.
.
To deactivate this feature, select Off at the step 5 above.
2. Highlight Settings and press
.
3. Highlight Airplane Mode and press
4. Wait a few seconds until the message scrolls down completely
and press
.
ᮣ
Cancel
Press
(right softkey) to return to the setting display.
5. Select On or Off and press
.
ᮣ
If you set to On, “Phone Off” appears on the display and Time/Date
disappears.
Section 2: Understanding Your Phone
42 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 43
AbbreviatedDialing
SettingMyShortcut
Abbreviated Dialing is another form of speed dialing. If the last four digits
you enter do not match any stored phone book entry, the digits are
automatically prepended with the digits specified using the following steps.
You can arrange your own shortcut menu.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
4. Highlight MyShortcut and press
to display the main menu.
.
To activate this feature:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
4. Highlight Abbrev.Dial and press
5. Highlight Enable and press
to display the main menu.
.
.
5. Select the menu under MyShortcut and press
.
.
6. Highlight your desired menu option and press
.
.
ᮣ
Info.
Press
(right softkey) at the step 5 above to see the My Shortcut
.
information.
6. Enter a six-digit number and press
.
Changingthe MenuLanguage
When you first turn your phone on, the menus are displayed in English.
If you want to deactivate this feature, highlight Disable at the step 5 above.
Tip: If you enter less than 6 digits, the display shows a warning message.
To change the menu language to Spanish, follow these steps.
See page 28 for using this feature.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
4. Highlight Language and press
5. Select Español and press
to display the main menu.
.
SettingHeadsetMode
To turn the Turbo Button of the Headset On or Off.
.
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Others and press
to display the main menu.
.
.
.
4. Highlight HeadsetMode and press
.
5. Select On or Off and press
.
ᮣ
Info.
Press
(right softkey) at the step 5 above to see the Headset Mode
information.
Section 2: Understanding Your Phone
44 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 45
PositionLocations
To turn the Location Service On or Off:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Location and press
SettingTTYMode
This feature set the TTY Mode to on or off.
A TTY(also known as TDD or Text Telephone) is a telecommunications
device that allows people who are deaf or hard of hearing, or who have
speech or language disabilities, to communicate by telephone. Connect
the TTY device to the Headset Jack of Your PCS Phone. Then type the
message you want to send on the TTY’s keyboard.
to display the main menu.
.
.
4. Press
completely.
or wait a few seconds until the message scrolls down
To Turn the TTY Mode On or Off:
1. From the Standby mode, press
2. Press
.
5. Select On or Off and press
.
.
Tip: These icons let you know whether information of your position is
sent to the network or not. If you are in no service or roaming area,
indication is always
3. Highlight Save Phone# and press
4. Highlight Accessibility and press
5. Highlight TTYOn or TTYOff and press
.
.
indicates the Location Service is enabled.
indicates the Location Service is disabled.
.
ᮣ
Highlight LearnMore and press
at the step 5 above for
instruction.
Section 2: Understanding Your Phone
46 2B: Controlling Your Phone’s Settings
Section 2: Understanding Your Phone
2B: Controlling Your Phone’s Settings 47
Section 2C
Setting Your Phone’s Security
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Accessing the Security Menu
Locking Your Phone
Unlocking Your Phone
Using Special Numbers
Resetting and Locking Your Phone through SMS
Security Features for PCS VisionSM
y using the security setting on your PCS Phone, you receive peace of mind
Bwithout sacrificing flexibility. With several options available, you can
customize your phone to meet your personal needs.
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 49
48
Accessingthe SecurityMenu
You must enter your lock code to view the Security menu.
To access the Security menu:
UnlockingYourPhone
To unlock your phone:
Unlock
1. From the Locked display, press
2. Enter your lock code.
(left softkey).
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Security and press
4. Enter your lock code.
to display the main menu.
.
.
Lockingthe Keypad
Locking the keypad helps avoid accidental key presses without blocking
incoming calls or messages. This feature can only be activated when your
phone is in Standby mode.
Tip: If you can’t recall your lock code, try using the last four digits of either
your Social Security number or PCS Phone Number or try 0000. If none of
these work, call PCS Customer Service Solutions at 1-888-211-4PCS (4727).
To lock your keypad:
1. From the Standby mode, press
2. Highlight KeyGuard and press
OR
to display the main menu.
.
LockingYourPhone
When your phone is locked, your phone allows you to restrict incoming calls
and make calls to 911, PCS Customer Service Solutions or special numbers.
1. From the Standby mode, press and hold
.
To lock your phone:
Unlockingthe Keypad
1. From the Security Menu display (See “Accessing the Security Menu” on
page 50), highlight LockPhone and press
1. Press and hold
.
.
Changingthe LockCode
2. Highlight LockNow or OnPower-up and press
.
To change your lock code:
3. Depending on your preference, highlight either FullLock or
ExceptIncomCall, and press
1. From the Security Menu display (See “Accessing the Security Menu” on
page 50), highlight SecuritySetting and press
.
.
ᮣ
FullLock: All phone calls except for Emergency#,
(PCS
Customer Service Solutions) or Special #s cannot be made. And no
phone calls can be received except for Special #s.
2. Highlight Change Lock and press
.
3. Enter new code “1234” for example in the box under New Code.
ᮣ
ExceptIncomCall:All phone calls except for Emergency#,
(PCS Customer Sevice Solutions) or Special #s cannot be made. But all
incoming calls can be received.
4. Reenter new lock code in the box under ReenterCode.
Tip: If you want to cancel the “On Power-up” setting before turning the
phone off, select Unlocked at the step 2 above.
Section 2: Understanding Your Phone
50 2C: Setting Your Phone’s Security
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 51
CallinginLockMode
You can place calls to 911 and to your special numbers when in lock mode.
UsingSpecialNumbers
You can save three special numbers in addition to your Internal Phone
Book entries (the same number may be in both directories). You can make
and receive calls from special numbers even when your phone is locked.
To place an outgoing call in lock mode:
ᮣ
To call an emergency number, special number or
(PCS
To add or replace a special number:
Customer Service Solutions), enter the phone number and press
(For emergency numbers, see “Calling Emergency Numbers” on
page 24.)
.
1. From the Security Menu display (See “Accessing the Security Menu” on
page 50), highlight SecuritySetting and press
2. Highlight Special#s and press
3. Highlight the box under the entry number and press
.
.
RestrictingCalls
.
You can restrict both incoming calls and outgoing calls if necessary. (The
Restrict Calls setting does not apply to 911 or
Service Solutions.)
PCS Customer
4. Enter your desired phone number and press
or
.
Options
Press
(right softkey), then highlight FromPhone Book or
To restrict calls:
Voicemail and press
.
1. From the Security Menu display (See “Accessing the Security Menu” on
page 50), highlight SecuritySetting and press
To insert pauses into a number:
.
1. From the step 4 above, enter the phone number and
2. Highlight LimitUse and press
.
Options
press
(right softkey) for the options.
3. Select the menu under OutgoingCalls or IncomingCalls and press
2. Highlight HardPause, 2-SecondPause or Hyphen and press
3. Finish entering the rest of the numbers and press
.
.
.
4. Highlight your desired option, and press
.
Note: There are no Speed Dial options associated with special numbers.
Options:
ᮣ
Allow All: You can make or receive all calls.
Erasingthe InternalPhone Book
To erase all the names and phone numbers in your Internal Phone Book:
ᮣ
Phone BookOnly: Only Phone Book entries, Voicemail or Special #s
(see the next page) are available to make or receive calls.
ᮣ
1. From the Security Menu display (See “Accessing the Security Menu” on
Special#s Only: Only three special number’s entries are available to
page 50), highlight Erase PhoneBook and press
2. If you’re sure you want to erase your Phone Book, highlight Yes and
press
.
make or receive calls.
Note: Restricted incoming calls are forwarded to voicemail.
.
Note: To unrestrict all calls, select Allow All at the step 4 above.
Section 2: Understanding Your Phone
52 2C: Setting Your Phone’s Security
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 53
To activate this feature, the following presetting is required:
Erasingthe Downloads
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Security and press
4. Enter your lock code.
to display the main menu.
To erase all the downloaded data from web:
.
.
1. From the Security Menu display (See “Accessing the Security Menu” on
page 50), highlight Erase Downloads and press
2. If you’re sure you want to erase all the downloaded data from web,
highlight Yes and press
.
.
5. Highlight SecuritySetting and press
6. Highlight FoundMe and press
7. Highlight Reset/Lock and press
.
ᮣ
If you have assigned downloaded data, returns to default setting.
.
ResettingYourPhone
.
Resetting the phone restores all the factory defaults, including the ringer
types and display settings. The Internal Phone Book, Call History,
Scheduler and Messaging are not affected.
8. Select Enable and press
.
To unlock a phone that has been locked through SMS, bring the phone to
Sprint Retail Store.
To reset your phone:
Changing the Passcode
1. From the Security Menu display (See “Accessing the Security Menu” on
To change the passcode for the special formatted SMS messages.
page 50), highlight ResetPhone and press
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Security and press
4. Enter lock code.
to display the main menu.
2. If you’re sure you want to reset your phone, highlight Yes and press
.
.
.
ResettingandLockingYourPhone throughSMS
When your phone is lost or stolen, you can erase your important personal
information (such as phone book entries, call history and messages) and
lock your phone by sending a special formatted SMS message to your
phone.
5. Highlight SecuritySetting and press
6. Highlight FoundMe and press
.
.
Send the following format from your computer:
\ \ RESET **<Passcode>** RESET
7. Highlight ChangePasscode and press
.
8. Enter new passcode in the box under New Passcode (11 digits).
<Passcode>–yourdefinedpasscode.
9. Reenter the new passcode in the box under ReenterCode.
DefaultPasscodeis11-digitESN(ElectronicSerialNumber)
whichiswrittenonthepackageorphoneitself.
The locked phone will display the following message:
“If found, please call PCS Customer Solutions 1-888-211-4727.”
Section 2: Understanding Your Phone
54 2C: Setting Your Phone’s Security
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 55
SecurityFeatures forPCSVisionSM
SigningInandOutofPCSVisionServices
You can sign out of PCS Vision Services without turning off your phone,
however you will not have access to all PCS Vision Services, including Web
browsing and messaging. Signing out will avoid any charges associated
with PCS Vision Services. While signed out, you can still place or receive
phone calls, check voicemail, and use other voice services. You may sign
in again at any time.
AutomatingYourPCSVisionPassword
Your phone comes equipped with a password that enables it to
automatically connect to PCS Vision services automatically. This way, you
can access PCS Vision Services without having to type a password.
Then, when you enter your new password on the phone, you can choose
whether the phone should ask for that password each time it connects to
PCS Vision Services.
To sign out of PCS Vision Services:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Internet and press
4. Highlight SignOut and press
to display the main menu.
.
To have your phone request your PCS Vision password each time it
connects to PCS Vision services:
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Internet and press
to display the main menu.
.
.
SignOut
5. A message will appear. Press
want to sign out.
(left softkey) to confirm that you
to display the main menu.
.
To sign in to PCS Vision Services:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Internet and press
4. Highlight SignIn and press
4. Highlight PasswordPrompt and press
5. Select AlwaysPrompt and press
OK
.
.
.
6. A message will appear. Press
(left softkey) to confirm that you want
to set.
.
To have your phone automatically submit your PCS Vision password each
time it connects to PCS Vision Services:
.
5. Enter your PCS Vision password if necessary.
1. Follow the steps 1 to 4 above.
2. Select NeverAsk and press
.
3. Enter the password (6 to 16 characters) and press
or
OK
(left softkey).
Section 2: Understanding Your Phone
56 2C: Setting Your Phone’s Security
Section 2: Understanding Your Phone
2C: Setting Your Phone’s Security 57
Section 2D
Controlling Your Roaming
Experience
In This Section
ᮣ
Understanding Roaming
ᮣ
ᮣ
Setting Your Phone’s Roam Mode
ControllingRoamingCharges UsingCallGuard
oaming is the ability to make or receive calls while you’re off the
RSprint Nationwide PCS Network. Your new dual band PCS Phone works
anywhere on the enhanced Sprint Nationwide PCS Network and allows you to
roam on digital networks virtually anywhere in the U.S. where compatible
wireless service is available.
This section explains how roaming works as well as special features that let
you manage your roaming experience.
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 59
58
Phone Number. Press
your pass code at the prompt.
There are security and privacy risks (eavesdropping and cloning) that
exist with conventional analog services today.
Your battery needs recharging sooner when you use your phone for
analog roaming.
when you hear your greeting and enter
UnderstandingRoaming
Recognizing Icons on the Display Screen
ᮣ
ᮣ
Your phone’s display screen always lets you know when you’re off the
Sprint Nationwide PCS Network and whether your phone is operating in
analog or digital mode. The following chart indicates what you’ll see
depending on where you’re using your phone.
Note: If you’re on a call when you leave the Sprint Nationwide
PCS Network and enter an area where roaming is available (whether
digital or analog), your call is dropped. If your call is dropped in an area
where you think PCS Service is available, turn your phone off and on
again to reconnect to the Sprint Nationwide PCS Network.
RoamingIndicator
Sprint Nationwide PCS Network
Other/Analog Networks
Tip: Remember, when you are using your phone off the Sprint
Nationwide PCS Network, always dial numbers using 11 digits
(1 + area code + number).
Note: When using your phone in analog mode, the handset may feel
warm. This behavior is normal for analog operation.
SettingYourPhone’s RoamMode
Note: You will pay a higher per-minute rate for roaming calls.
Your PCS Phone allows you to control your ability to roam. By using the
Roaming menu option, you can determine which signals your phone
accepts.
Roaming on Other Digital Networks
When you’re roaming on other digital networks, your call quality and
security will be similar to the quality you receive when making calls while
on the enhanced Sprint Nationwide PCS Network. You may not be able to
access certain calling features, such as PCS Vision.
Set Mode
Choose from three different settings on your dual band phone to control
your roaming experience:
Roaming on Analog Networks
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Roaming and press
4. Highlight SetMode and press
to display the main menu.
When you roam on analog networks, you will experience a similar
quality provided by other analog carriers today. Although some calling
features, such as PCS Vision, will be unavailable, you can still make and
receive calls and access voicemail. You will experience a few differences:
.
.
.
ᮣ
You are more likely to experience static, cross-talk, fade-out and
5. To select an option, select it and press
.
dropped calls.
ᮣ
Sprint: This setting allows you to select the enhanced Sprint Nationwide
PCS Network only and prevents roaming on other networks.
ᮣ
Some calling features which are standard on the enhanced Sprint
Nationwide PCS Network, such as call waiting, PCS Vision Products and
Services and direct international dialing, are unavailable.
Though callers can leave voicemail messages while you are roaming,
you will not receive notification until you return to the Sprint
Nationwide PCS Network. While roaming, you can periodically check
your voicemail for new messages by dialing 1+area code+your PCS
ᮣ
ᮣ
Automatic: This setting seeks Sprint Service. When Sprint Service is
unavailable, the phone searches for an alternative system.
Analog: This setting forces the phone to seek an analog roaming system.
The previous setting is restored the next time the phone is turned on.
ᮣ
Section 2: Understanding Your Phone
60 2D: Controlling Your Roaming Experience
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 61
To Answer Incoming Roaming Calls With Call Guard On:
ControllingRoamingCharges UsingCallGuard
1. Press
2. Press
OR
.
In addition to the roaming icon, Call Guard alerts you when roaming
charges apply. This feature makes it easy to manage your roaming
charges by reminding you when you make or receive roaming calls. It
also requires you to take additional steps before placing or answering a
roaming call. These additional steps are not required when you make or
receive calls while on the enhanced Sprint Nationwide PCS Network.
to proceed while the pop-up message is displayed.
1. Press
, highlight Answer and press
.
Remember if the Call Guard feature is set to On, you need to take extra
steps to make and receive roaming calls even if you have selected the
Analogsetting (see page 61).
To Turn the Call Guard Feature On or Off:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Roaming and press
4. Highlight CallGuard and press
5. Select On or Off and press
to display the main menu.
.
.
.
.
To Place Roaming Calls With Call Guard On:
1. From the Standby mode, dial 1 + area code + the seven-digit number.
(You can also initiate a call from the Internal Phone Book, Call History
or Messaging.)
2. Press
3. Press
or
or press
, highlight Call and press
.
to proceed while the pop-up message is displayed.
Press any key to erase the pop-up message, then press
RoamCall and press
, highlight
.
Section 2: Understanding Your Phone
62 2D: Controlling Your Roaming Experience
Section 2: Understanding Your Phone
2D: Controlling Your Roaming Experience 63
Section 2E
Navigating Through Menus
In This Section
ᮣ
ᮣ
ᮣ
Menu Navigation
Menu Structure
Viewing Menus
his section is a road map to using your PCS Phone. Every function and
Tfeature can be accessed through a menu. Take a few moments to learn
your way around. You’ll find that it makes your phone easier to use.
Section 2: Understanding Your Phone
64
2E: Navigating Through Menus 65
MenuNavigation
Viewingthe Menus
The navigation key on your PCS Phone allows you to scroll through
menus quickly and easily.
Menu Diagram
Menus let you check or change your phone settings. The following outline
shows your phone’s menu structure.
To navigate through a menu, simply press the navigation key up or down.
As you navigate through the menu, menu options are highlighted. Select
1. Call History
1. Outgoing Calls
2. Incoming Calls
3. Missed Calls
4. Erase History
2. Phone Book
1. Find Name
2. Add New Entry
3. My Phone#
4. Speed Dial #s
5. Long Phone#s
6. Services
an option by highlighting it and pressing
.
MenuStructure
Selecting Menu Items
As you navigate through a menu, the options are highlighted. Select an
option by highlighting it and pressing
.
For example, if you want to view your last incoming call:
1. From the Standby mode, press
to display the main menu.
. (It may already be
3. Messaging
1. Short Mail
2. Email
2. Highlight CallHistory, and press
highlighted.)
3. Notifications
4. Web
3. Press the Navigation key down to highlight IncomingCalls and press
5. Downloads
1. Games
2. Ringers
3. Screen Savers
4. Applications
5. Dynamic 1-10 (If applicable)
6. Others
. If you have received any calls, they are displayed on the screen.
Backing Up Within a Menu
To go to the previous menu:
ᮣ
Press
.
6. Voicemail
1. Call Voicemail
2. Details
To go to the Standby display:
ᮣ
Press
.
3. Clear Count
Shortcuts
7. Settings
1. Sounds
Left Navigation key ( ) to take a shortcut to the My Shortcut menu. (See
page 45 for setting.)
2. Display
3. Internet
4. Location
5. Roaming
6. Messaging
7. Security
8. Airplane Mode
9. Others
Right Navigation key ( ) to take a shortcut to the Phone Book menu.
Section 2: Understanding Your Phone
66 2E: Navigating Through Menus
Section 2: Understanding Your Phone
2E: Navigating Through Menus 67
8. Calendar
Section 2F
9. VoiceService
1. Voice Memo
2. Screen Call
3. Voice Dial
10. Tools/Extras
1. PC Sync
2. Calculator
3. World Clock
4. Crab Catch
Managing Call History
In This Section
11. Phone Info
1. My Phone#
2. Current User
3. Help
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Viewing History
Call History Options
4. Version
Making a Call From Call History
Saving a Phone Number From Call History
Erasing Call History
12. Key Guard
he Call History helps you manage your time more effectively. It keeps
Ttrack of incoming calls, calls made from your PCS Phone and missed
calls. This section guides you through accessing and making the most of your
Call History.
Section 2: Understanding Your Phone
68 2E: Navigating Through Menus
Section 2: Understanding Your Phone
2F: Managing Call History 69
ViewingHistory
Makinga CallFromCallHistory
You’ll find your Call History invaluable. It is a list of the last 20 phone
numbers or Internal Phone Book entries for calls you placed, accepted or
missed. Call History makes redialing a number fast and easy. It is
continually updated as new numbers are added to the beginning of the list
and the oldest entries are removed from the bottom of the list.
To place a call from Call History:
1. From the Standby mode, press
to display the main menu.
2. Highlight CallHistory and press
.
3. Highlight OutgoingCalls, IncomingCalls or MissedCalls.
4. Press
5. Highlight the entry you want to call by scrolling through the list.
Each entry contains the phone number (if it is available) and Internal
Phone Book entry name (if the phone number is in your Internal Phone
Book). Duplicate calls (same number and type of call) may only appear
once on the list.
.
6. Press
or
.
To view a Call History entry:
Press
, highlight Call and press
.
1. From the Standby mode, press
to display the main menu.
.
2. Highlight CallHistory and press
Note: You cannot make calls from Call History to entries identified as
No ID or Restricted.
3. Highlight OutgoingCalls, IncomingCalls or MissedCalls, and press
.
Savinga Phone NumberFromCallHistory
Your PCS Phone can store up to 300 Internal Phone Book entries. Phone
Book entries can store up to a total of 500 phone numbers and each entry’s
name can contain sixteen characters.
CallHistoryOptions
For additional information and options on a particular call, highlight a
Call History entry and press
of selecting:
. This feature gives you the option
To save a phone number from Call History:
ᮣ
Call to dial the phone number.
1. Highlight the call history entry you want to save.
ᮣ
Save Phone# to save the phone number if it is not already in your
Internal Phone Book (if applicable) or if the caller’s phone number has
already been stored in the any Phone Book entry, Alternate appears
instead of Save Phone#. (See “Saving a Phone Number From Call
History” on pages 71-72.)
2. Press
3. Highlight Save Phone# and press
4. Highlight appropriate label (Home, Work, Mobile, Pager, Data, Fax or
to display the options.
.
No Label) and press
.
ᮣ
Prepend to add numbers to the beginning of the phone number. (See
OK
(left softkey). Or you can also
5. Enter a Name, and press
or
“Prepending a Phone Number From Call History” on page 72.)
save the phone number without a name by pressing
name entry display, highlight Yes and then press
any already stored entries in the Phone Book, you are prompted to
select the following entry mode.
from the
. If you have
ᮣ
ᮣ
View to view the caller’s information.
Erase to erase the entry.
Tip: You can also view the next Call History entry by pressing the
navigation key right or view the previous entry by pressing the navigation
key left.
ᮣ
ᮣ
New Name to enter a name directory.
FromPhone Book to select a name from Phone Book entry list.
Section 2: Understanding Your Phone
70 2F: Managing Call History
Section 2: Understanding Your Phone
2F: Managing Call History 71
Save
6. Press
(left softkey).
ErasingCallHistory
Note: You cannot save phone numbers from calls identified as No ID or
Restricted. If the selected entry has already been stored in the phone
book, “Alternate” appears at the step 3 on the previous page.
To erase individual Call History entries, see “Call History Options” on
page 70.
To erase Call History:
After you have saved the number, the new Internal Phone Book entry is
displayed. (See “Internal Phone Book Entry Options” on page 76.)
1. From the Standby mode, press
2. Highlight CallHistory and press
3. Highlight Erase History and press
to display the main menu.
.
.
Prependinga Phone NumberFromCallHistory
If you need to make a call from Call History and you happen to be outside
your local area code, you can add the appropriate prefix by following
these steps:
4. Highlight the category you want to erase and press
.
5. Highlight Yes and press
.
ᮣ
You can also select AllCalls at the step 4 above to erase all entries.
1. Highlight a call history entry and press
2. Highlight Prepend and press
3. Enter the digits you want to add to the number.
.
.
If you want to save the number, press
from options.
and select Save Phone#
If not, the changes only apply to the current call.
To select an option, highlight it and press
.
ᮣ
Call to dial the phone number.
ᮣ
Save Phone# to store the phone number in your Internal Phone Book.
ᮣ
ᮣ
H HardPause to insert a hard pause. (See “Dialing and Saving Phone
Numbers With Pauses” on page 28.)
T 2-SecondPause to insert a 2-second pause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 28.)
Section 2: Understanding Your Phone
72 2F: Managing Call History
Section 2: Understanding Your Phone
2F: Managing Call History 73
Section 2G
Using the Internal Phone Book
In This Section
ᮣ
ᮣ
ᮣ
Internal Phone Book Entry Options
Adding a New Internal Phone Book Entry
Finding Internal Phone Book Entries
Selecting a Ringer Type
ᮣ
ᮣ
DialingPCSServices
ow you know the basics that help make it easier to stay in touch with
Npeople and information. This section helps you make the most of your
contacts and use your time more efficiently when you are trying to connect
with the important people in your life.
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 75
74
ᮣ
ᮣ
ᮣ
ᮣ
Alphabet to enter characters by tapping the keypad (see page 78).
SYMBOL to enter symbols (see page 79).
InternalPhone BookEntryOptions
When you display an Internal Phone Book list, highlight your desired
entry and press
, then select the box under your desired label and
(right softkey).
NUMBER to enter numbers (see page 79).
Options
press
SMILEYS to enter smile pictures (see page 80).
ᮣ
Call to dial the phone number. (If you are roaming and have the Call
Guard feature activated, you are required to take an extra step to
proceed. See “Controlling Roaming Charges Using Call Guard” on
pages 62-63.)
EnteringCharacters UsingT9TextInput
T9 Text Input lets you enter text in your PCS Phone by pressing keys just
once per letter. (To select the T9Word mode when entering text, see
“Selecting a Character Input Mode” on pages 76-77.)
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
CallAlarm to set the call alarm to the entry.
SetSpeedDial to set the speed dial to the entry.
SetVoice Dial to set the voice dial to the entry.
Prepend to alter a phone number by adding additional numbers.
Erase to erase the selected number.
T9 Text Input analyzes the letters you enter using an intuitive word
database and creates a suitable word. (The word may change as you type.)
If the word you want does not display after you have entered all the letters,
press
to scroll through additional word selections. To accept a word
and insert a space, press
.
To erase the whole entry under the name, highlight the entry in the Phone
If you make a mistake, press
to erase a single character. Press and
Options
Book list and press
(right softkey)then highlight Erase Entry
hold
to delete an entire entry.
and press
.
Addinga Wordtothe T9Database
ᮣ
SendEmail to send the email. (Only Email category)
If a word you want to enter does not display as an option when you are
using T9 Text Input, you can add it to the database.
ᮣ
VisitSite to visit the Web site. (Only Web category)
Tip:You can view the next entry by pressing the navigation key right or view
the previous entry by pressing the navigation key left.
To add a word to the T9 Text Input database:
1. Select the Alphabet input mode. (See “Selecting a Character Input
Mode” on pages 76-77.)
Note:Record Voice Dial tags in a quiet environment and without the aid of
an accessory (for example, a headset or hands-free car kit).
2. Enter the word using multi-tap text entry. (See “Entering Characters by
Tapping the Keypad” on page 78.) Then press right softkey, highlight
Selectinga CharacterInputMode
Your PCS Phone provides convenient ways to enter words, letters,
punctuation and numbers whenever you are prompted to enter text (for
example, when adding an Internal Phone Book entry).
T9Word and press
. The word will appear as an option the next
time you scroll through options during T9 Text Input.
For more information about T9 Text Input, visit their Web site at
To change the character input mode:
1. When you display a screen where you can enter text, press right softkey
to display the input mode menu.
2. To select a character input mode, highlight it and press
.
ᮣ
T9Word to enter characters using T9 Text Input (see page 77).
Section 2: Understanding Your Phone
76 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 77
EnteringCharacters byTappingthe Keypad
UsingSmartPunctuation
“Smart punctuation” is available using in T9 mode. It’s a quick and easy
way to type email domains, possessive forms and contractions. When you
To enter characters by tapping the keypad, select the Alphabet mode (see
“Selecting a Character Input Mode” on pages 76-77). Press the
corresponding key until the desired character appears. By default, the first
letter of a word is capitalized and following letters are lowercase.
press
, T9 displays a period.
However, as you continue to type, T9 determines the appropriate mark
based on your word database.
Characters scroll in the following order:
For example, to type “It’s easy.”
Press
.
Tip: The beginning of the word after the space is changed to upper/lower
case depending on the entry field. You can change the shift by pressing
.
EnteringSymbols,Numbers andSmile Pictures
Entering SYMBOL
To enter symbols, select the SYMBOL mode. (See “Selecting a Character
Input Mode” on pages 76-77.)
1. In a text entry field, press right softkey.
In Spanish mode, characters scroll in the following order.
2. Highlight SYMBOL and press
.
3. Highlight the line that includes your desired symbol.
4. Press the corresponding key (1~0) with each symbol.
or
Highlight your desired symbol by using the Navigation key, and press
.
Entering NUMBER
To enter numbers, select the NUMBER mode and press the appropriate
key (see “Selecting a Character Input Mode” on pages 76-77).
1. In a text entry field, press right softkey.
2. Highlight NUMBER and press
.
3. Press the corresponding numeric key to enter the number.
See page 45 for changing Spanish entering mode.
Shortcut: Press and hold the corresponding numeric key to enter the
number directly.
After a character is entered, the cursor automatically advances to the next
space after two seconds or when you enter a character not on the same key.
Section 2: Understanding Your Phone
78 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 79
Entering SMILEYS
3. Highlight AddNew Entry and press
.
To enter smile picture, select the SMILEYS mode (see “Selecting a
Character Input Mode” on pages 76-77).
OK
4. Enter a name and press
or
(left softkey).
5. Select the box under your desired label and press
.
1. In a text entry field, press right softkey.
6. Enter the number or address, and press
.
2. Highlight SMILEYS and press
.
Save
7. Press
(left softkey).
3. Highlight the line that includes your desired smiley.
ᮣ
OK
(left
If you want to store the number without name, press
or
4. Press the corresponding key (1~4) with each smiley.
softkey) before you enter the name at the step 4 above and select Yes.
or
After you have saved the number, the new Internal Phone Book entry is
displayed. (See “Internal Phone Book Entry Options” on page 76.)
Highlight your desired smiley by using the Navigation key, and press
.
FindingInternalPhone BookEntries
There are several ways to display your Internal Phone Book entries.
Follow the steps outlined in the sections below to display entries from the
Internal Phone Book menu.
Addinga New InternalPhone BookEntry
Your PCS Phone can store up to 300 Internal Phone Book entries.
Phone Book entries can store up to a total of 500 phone numbers and the
entry’s name can contain 16 characters.
Finding Names
To add a new entry:
You can review all the entries stored in your Internal Phone Book or find
an entry quickly by following these simple steps:
1. From the Standby mode, enter the phone number you want to save.
2. Press
to display the menu options.
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight FindName and press
to display the main menu.
3. Highlight Save Phone# and press
4. Highlight your desired label and press
OK
(left softkey). Or you can also
.
.
.
.
5. Enter a Name, and press
or
4. Use your Navigation key to scroll through the Phone Book list and
highlight one of the appropriate entries and press
save the phone number without a name by pressing
name entry display, highlight Yes and then press
any already stored entries in the Phone Book, you are prompted to
select the following entry mode.
from the
. If you have
.
5. Select the box under your desired memory location by scrolling.
Options
6. Press
(right softkey) for the menu options, then highlight
your desired feature and press
.
ᮣ
ᮣ
New Name to enter a name directory.
Shortcut: From the Standby mode, press the navigation key to the right
to display the Find Name feature.
FromPhone Book to select a name from Phone Book entry list.
Save
6. Press
(left softkey).
OR
1. From the Standby mode, press
to display the main menu.
.
2. Highlight Phone Book and press
Section 2: Understanding Your Phone
80 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 81
Finding Entries
Find Long Phone Numbers
To find an Internal Phone Book entry by its entry number:
1. Press of the Navigation key.
To find phone numbers you have stored in Long Phone Numbers:
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight LongPhone#s and press
4. Long phone numbers list appears.
to display the main menu.
2. Enter the first letter of the name or part of the name using multi-tap
method.
.
.
3. Highlight your desired entry by scrolling through the phone book entry
and press
.
ᮣ
If you enter a single letter, the display shows the list that begins with
that letter.
Addinga Phone NumberorAddress to
anInternalPhone BookEntry
To add a phone number or address to an entry:
OR
1. Enter 4 digits or more.
2. Press
3. Highlight Find and press
1. From the Standby mode, press
to display the main menu.
.
2. Highlight Phone Book and press
.
.
3. Highlight FindName and press
.
4. The phone book entry list that includes the numbers that ends with the
digits you entered appears.
ᮣ
Press of the Navigation key for the shortcut (steps 1 through 3).
5. Scroll through the list to select your desired entry.
4. Highlight the entry you wish to add phone numbers/email/web
6. Press
to make a call.
addresses, and press
.
Finding Speed Dial Numbers
5. Select the box under your desired label by scrolling and press
.
To find phone numbers you have stored in speed dial locations:
6. Enter the number or address, and press
.
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight SpeedDial#s and press
4. Speed dial numbers list appears.
to display the main menu.
Save
7. Press
(left softkey).
.
.
EditinganInternalPhone BookEntry’s
Phone Number
To edit an entry’s phone number:
Finding Voice Dial Numbers
1. Display an Internal Phone Book entry.
To find phone numbers you have stored in Voice Dial:
2. Highlight your desired entry and press
3. Select the box under your desired option and press
(See “Editing an Internal Phone Book Entry” on the next page.)
.
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight Voice Dial and press
4. Highlight Review and press
5. Voice Dial number’s list appears.
to display the main menu.
.
.
.
4. Enter the number and press
.
.
Save
5. Press
(left softkey).
Section 2: Understanding Your Phone
82 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 83
EditinganInternalPhone BookEntry
To make changes to an entry:
Selectinga Ringer/Image Type foranEntry
You can assign a ringer/image type to an Internal Phone Book entry so
you can identify a caller by the ringer or image type.
1. Display an Internal Phone Book entry.
To select a ringer type for an entry:
2. Highlight your desired entry and press
.
1. Press of the Navigation key.
3. Select the box under following options, and press
.
2. Select the entry you want to set the incoming ringer or image and
ᮣ
Name to change the entry’s name. Enter the new name, and press
(See “Entering Characters by Tapping the Keypad” on page 78.)
.
press
3. Select the menu under Ringer or Image by scrolling up or down and
press
4. Highlight your desired ringer type or image and press
.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Home to change the entry’s phone number. Enter the new home phone
number.
.
.
Work to change the entry’s phone number. Enter the new work phone
number.
ᮣ
GetNew: start up a Browser and you can select an item to download.
Mobile to change the entry’s phone number. Enter the new mobile
phone number.
ᮣ
Normal:Ringerequivalents to With Caller ID or Roaming setting. (see
page 33). Image equivalents to Incoming Calls setting. (see page 40).
Pager to change the entry’s pager number. Enter the new pager
number.
ᮣ
None: the setting equivalents to off.
Save
5. Press
(left softkey).
Data to change the entry’s number for data. Enter the new data
number.
ᮣ
When you select the downloaded image data for setting, you can view the
Preview
downloaded data by pressing
(right softkey). (If applicable)
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Fax to change the entry’s fax number. Enter the new fax number.
ᮣ
ᮣ
If you set Animation Ringer as Ringer entry, Image entry change to
None automatically.
NoLabel to change the entry’s number. Enter the new number.
Email to change the entry’s email address. Enter the new email address.
You should have downloaded data to set incoming pictures.
Web to change the entry’s web address. Enter the new web address.
Ringer to assign a ringer type to the entry. (See “Selecting a
Ringer/Image Type for an Entry” on page 85.)
ᮣ
Image to assign an image type to the entry. (See “Selecting a
Ringer/Image Type for an Entry” on page 85.)
Tip: You can also store the phone number in the Pager, Data and Fax
Category.
Section 2: Understanding Your Phone
84 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 85
SecretInternalPhone BookEntries
StoringSpecialNumbers inthe Phone Book
You can hide an entry’s phone number(s) and require your lock code to
edit the entry by making it secret. The entry name is still displayed, but the
entry’s phone numbers are replaced by “(Secret)”.
Using the Pause Feature
Generally, when you call an automated system like voicemail boxes or
credit card companies, you are required to enter a password or calling
card number. Rather than entering the numbers manually each time, you
can store the numbers in your Internal Phone Book, separated by special
characters called “pauses”.
To make an entry secret:
1. Press of the Navigation key.
2. Scroll to the Internal Phone Book entry you want to tag Secret.
Options
Using Two Different Types of Pauses
3. Press
(right softkey) to display the menu options.
There are two different types of pauses that you can use when storing a
number in your Internal Phone Book.
4. Highlight SetSecret and press
.
5. Enter 4 digits lock code.
ᮣ
HardPause causes the phone to stop dialing until you select
6. Select On and press
.
SendTone or press
. To display SendTone, press
,
ᮣ
To make an entry public, select Off at the step 6 above.
highlight SendTone and press
.
ᮣ
Tip: If you can’t recall your lock code, try using the last four digits of
either your Social Security number or PCS Phone Number or try 0000.
If none of these work, call PCS Customer Service Solutions at
1-888-211-4PCS (4727).
2-SecondPause waitstwosecondsbeforesendingthenextstringofdigits.
To insert pauses into a number:
1. Enter the number you want to dial.
2. Press
to display the menu options.
DialingPCSServices
You must be in digital mode to access PCS Services.
To dial a service:
3. Highlight:
ᮣ
HardPause for a hard pause.
ᮣ
ᮣ
2-SecondPause for a timed pause.
Hyphen for a hyphen (see following section).
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight Services and press
to display the main menu.
.
4. Press
to insert a pause or manual hyphen.
.
5. Finish entering the rest of the numbers, then dial or save the entered
number. See pages 26-27 for saving.
4. Highlight CustSolutions, DirAssist, AccountInfo., SprintOperator
or Voice Command and press
5. Press
.
Using Hyphens
.
You can add hyphens to your Internal Phone Book numbers, however they
are mainly for show. You can insert hyphens manually where you like, or
choose automatic hyphenation, which inserts hyphens according to the
North American Numbering Plan. Entering a manual hyphen suspends
any automatic hyphenation for that number.
or
Press
, highlight Call and press
.
Section 2: Understanding Your Phone
86 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 87
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight SpeedDial#s and press
to display the main menu.
UsingDifferentDialingMethods
Prepend Dialing
.
.
Prepend dialing allows you to alter a phone number in your Phone Book
by adding additional numbers. For example, if your Internal Phone Book
entry was entered without an area code and you are out of town, you can
prepend that entry with the appropriate area code.
4. To select a corresponding speed dial number from 2-9, highlight an
unassigned number and press
5. Highlight the entry from the list and press
.
.
1. Highlight the phone number stored in Phone Book entry using one of
the previously described methods.
6. Select the phone number you want to set a speed dial, and press
.
To use speed dial:
Options
2. Press
(right softkey) to display the menu options.
1. From the Standby mode, press and hold the appropriate key that
corresponds to the memory location for approximately two seconds.
OR
3. Highlight Prepend and press
.
4. Enter the digits you wish to prepend.
5. Press
or
Press
.
1. From the Standby mode, press the appropriate key, and then press
.
The display confirms that the number has been dialed when it shows
Connecting.
to display the menu options, then highlight Call and press
.
MyPCSPhone Number
To display your phone number:
Using Speed Dial
With this feature you can dial Internal Phone Book entries with one key
press for locations 2-9. Save your memory locations 2-9 for speed dialing
or your most commonly used phone numbers. Speed dial numbers must
be stored in your Phone Book to use this feature.
1. From the Standby mode, press
2. Highlight Phone Book, and press
3. Highlight MyPhone#, and press
to display the main menu.
.
.
To store a speed dial number:
1. Press of the Navigation key.
2. Highlight the Internal Phone Book entry which you want to set a speed
dial number.
3. Press
.
4. Select the box under the phone number you want to set a speed dial.
Options
5. Press
(right softkey) to display the menu options.
6. Highlight SetSpeedDial and press
.
7. To select a corresponding speed dial number from 2-9, highlight an
unassigned number and press
OR
.
Section 2: Understanding Your Phone
88 2G: Using the Internal Phone Book
Section 2: Understanding Your Phone
2G: Using the Internal Phone Book 89
Section 2H
Personal Organizer
In This Section
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
Managing Schedules
Adding an Event to the Scheduler
Event Alerts
Viewing Events and Event Options
Personal Information Management
Using the Calculator
Games
our PCS Phone has been equipped with several personal information
Ymanagement features to help you manage your busy lifestyle. These
features turn your phone into a time management planner that helps you keep
up with your contacts, schedules and commitments. It takes productivity to a
whole new level.
Section 2: Understanding Your Phone
90
2H: Personal Organizer 91
ManagingSchedules
AddinganEventtothe Scheduler
Your Scheduler helps organize your time and reminds you of
important events.
Calendar
UsetheCalendartoremindyouofeventsorimportantcallsyouneedtomake.
Youcanscheduleupto100events, 15CallAlarmsand20To-DoItems.
Setting the Time/Date
To add an event:
1. From the Standby mode, press
to display the main menu.
.
In no service area or Analog service area, it’s necessary to set actual time
and date to use Calendar function. Set the current Time/Date by using
2. Highlight Calendar, and press
3. Highlight the day you want to add an event to by using the Navigation
key and press
numeric keys and/or the Navigation key (
change value). To display the time setting display, press
highlight Calendar and press
/
: move cursor,
/
:
.
, then
.
Options
4. From the event list display, press
(right softkey) to display the
It’savailablefrom12:00AM, Jan1, 2000to11:59PM, Dec31, 2099.
options.
Setting Holidays
5. Highlight AddEvent and press
.
You can set your personal holidays by displaying the date in bold on the
Calendar display. The default holidays displayed in bold are Sundays and
National holidays.
6. Highlight Schedule Event and press
.
or press
7. Enter the description and press
the description.
without entering
YoucansetholidaysfromJan1,2000toDec31,2020.
8. Select the menu under the following options and press
.
1. From the Standby mode, press
to display the main menu.
ᮣ
Description Entering a description of your event (up to 14 characters).
From Scheduling the start time.
2. Highlight Calendar and press
.
ᮣ
ᮣ
ᮣ
ᮣ
ᮣ
3. Highlight the day you want to set to the holiday by using the Navigation
key ( : previous day, : next day, : previous week, : next week).
Options
To Scheduling the end time.
4. Press
(right softkey).
Location Editing the location of your event (up to 14 characters).
Alarm Select your desired setting from On or Off.
5. Highlight SetDate or SetWeekly from the options, and press
.
Options:
AlarmTime Editing the alarm time (number of hours or minutes
before the event starts). Default alarm time is 10 minutes.
ᮣ
SetDate setstheselecteddatetotheholiday.
ᮣ
SetWeeklysetstheweeklyholidays.
ᮣ
Repeat Repeating the event. Select None, Daily, Weekly, Monthly, or
Yearly.
ᮣ
ResetDate resetstheholidaysettingfortheselecteddate.
ᮣ
ResetWeeklyresetstheweeklyholidaysetting.
Save
8. Press
(left softkey) to schedule the event.
ᮣ
ResetAllresetsalltheholidaysettingsandreturnstothedefaultsettings.
Tip: Press the navigation key up or down to scroll by week through the
Scheduler calendar.
6. If you selected SetWeekly, ResetWeekly or ResetAll, you’ll be
prompted to select Yes or No.
Tip: The current day is framed by a rectangle.
Section 2: Understanding Your Phone
92 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 93
EventAlerts
Addinga CallAlarmtothe Scheduler
There are several ways your PCS Phone alerts you of scheduled events:
To add a Call Alarm from the Scheduler:
ᮣ
By playing the alert tone. (Depends on the setting Alert and Key Volume.)
1. From the Standby mode, press
to display the main menu.
ᮣ
By blinking the LED.
2. Highlight Calendar, and press
.
ᮣ
By displaying event’s description on the LCD.
3. Highlight the day you want to add an event to by using the Navigation
key, and press
ᮣ
By lighting backlight of LCD. (Depends on the setting Backlight.)
.
EventAlertMenu
Options
4. From the event list display, press
(right softkey) to display the
options.
When your phone is turned on and you have an event alarm scheduled,
your phone alerts you and displays the following options. To select an
5. Highlight AddEvent and press
.
.
option, highlight it and press
.
6. Highlight CallAlarm and press
View
1. Press
or
(left softkey) to see the event details.
Options
7. Enter the phone number directory or press
options.
(right softkey) for
Options
2. Press
(right softkey)to display the options.
3. Highlight an option and press
.
ᮣ
FromPhone Bookselectthenumberfromyourdesiredphonebookentry.
ᮣ
Snooze to repeat the alarm in ten minutes.
ᮣ
Voicemail select the number for voicemail access.
ᮣ
Erase to delete the event (even if it is a repeating event).
8. Then select the box under the following items and press
.
ᮣ
EditingEvents Options
To change an event:
Time/Date Editing the start time/date.
ᮣ
Repeat Repeating the Call Alarm. Select None, Daily, Weekly,
Monthly or Yearly.
1. From the Event list display, highlight one of events, and press
2. The event details appear.
.
Save
9. Press
(left softkey).
Tip: You can also add a Call Alarm from the Phone Book menu (see “Internal
Phone Book Entry Options” on page 76).
3. Select the box under each item you want to edit, and press
(See “Adding an Event to the Scheduler” on page 93 for options.)
.
4. Enter or select a new setting, and press
.
CallAlarmAlerts
Save
5. Press
(left softkey).
There are several ways your PCS Phone alerts you of scheduled call alarm:
ᮣ
By playing the alert tone. (Depends on the setting Alert and Key Volume.)
ᮣ
By blinking the LED.
ᮣ
By lighting backlight of LCD. (Depends on the setting Backlight.)
Section 2: Understanding Your Phone
94 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 95
CallAlarmMenu
GoingtoToday’s SchedulerMenu
If you are viewing the Scheduler menu and wish to go to the Scheduler
menu for today’s date:
When your phone is turned on and you have scheduled a call alarm, your
phone alerts you and displays the following options. To select an option,
highlight it and press
.
To view your scheduled events and Call Alarms:
View
1. Press
or
(left softkey) to see the call alarm details.
1. From the Standby mode, press
.
Options
2. Press
(right softkey) to display the options.
2. Highlight Calendar and press
.
3. Highlight an option, and press
.
3. Then, a “ ” is displayed next to the date if an event or call alarms is
scheduled.
ᮣ
Call to dial the scheduled phone number.
4. To view an individual day, highlight the day by using the Navigation
key ( : previous day, : next day, : previous week, : next week)
ᮣ
ᮣ
Snooze to repeat the alarm in ten minutes.
Save Phone# to save the scheduled phone number if it is not already in
your Internal Phone Book or if the caller’s phone number has already
been stored in the any Phone Book entry, Alternate appears instead of
Save Phone#.
and press
.
5. Highlight one of the events or call alarms from the list, and press
The details display appears.
.
ᮣ
Erase to delete the call alarm (even if it is a repeating event).
To view a future/past day’s scheduled Events, follow these steps:
Options
1. From the Event list display, press
(right softkey).
EditingCallAlarms Options
To change a Call Alarm:
2. Highlight GoToDate and press
.
3. Enter the date by using numeric keys and the Navigation key and press
1. From the Event list display, highlight one of call alarms, and press
2. The call alarm details appear.
.
OK
or
(left softkey).
4. Press
again to view the day’s Event List.
3. Select the box under each item you want to edit, and press
.
AddingToDoItems
Your phone can store and manage 20 To Do items.
To add an entry to your To Do List:
Options
(See “Adding a Call Alarm to the Scheduler” on page 95 for options.)
4. Enter or select a new setting and press
.
Save
5. Press
(left softkey).
1. From the Event list display, press
(right softkey).
Erasinga Day’s Events orCallAlarms
To erase a scheduled day’s events:
2. Highlight ToDoList and press
.
Options
3. From To Do List display, press
4. Highlight AddItem and press
5. Enter the description and press
(right softkey).
1. From the Event list display, highlight one of event or call alarms and
.
press
.
(up to 14 characters).
Options
2. The Event details appear, and press
(right softkey).
6. Highlight the box under Priority and press
priority. You can select from Normal, !Urgent or √Done.
to edit the To-Do’s
3. Highlight Erase and press
.
4. Highlight Yes and press
.
Save
7. Press
(left softkey).
Section 2: Understanding Your Phone
96 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 97
ViewingToDoItems
To view your To Do List:
ViewingEvent,CallAlarmorToDoList
To view available and used memory space:
Options
Options
1. From Event list display, press
2. Highlight ToDoList and press
(right softkey).
1. From Event list display, press
(right softkey).
.
.
2. Highlight View Memory and press
3. From To Do List display highlight an item and press
.
3. Highlight Schedule Event, CallAlarm or ToDoList and press
.
4. Then detail display appears.
For further options:
EditingToDoItems
Options
4. Press
(right softkyey).
To change a To Do item:
5. Highlight an option, and press
.
1. From the To Do List display, highlight the item you want to edit, and
press
Options:
.
ᮣ
Erase Old deletes the old events or call alarms.
Options
2. Highlight the box under your desired items and press
(right
ᮣ
Erase Selection deletes the To Do you selected. (See “Deleting To Do
softkey).
from the List” on page 98).
3. Highlight AddToSchedule or Erase Item and press
.
ᮣ
ᮣ
Erase Done deletes the To Do that is done.
Options:
Erase All deletes the all events, call alarms and To Do.
ᮣ
AddToSchedule extracts the item from the To-Do list and makes it a
6. Highlight Yes or No, and press
.
scheduled event.
PurgingAllEvents,CallAlarms orToDoList
To delete all scheduled events, call alarms or To Do List:
Options
ᮣ
Erase Item erases the item.
DeletingToDofromthe List
1. From To Do List display, press
1. From Event list display, press
(right softkey).
.
Options
(right softkey).
2. Highlight Erase Memory and press
2. HighlightErase SelectionorErase Allandpress
.
ᮣ
3. Highlight one item from the Options and press
.
Erase Selection select the box next to To Do item and press
to
Erase
checkthebox. Then press
to check all box, press
(left softkey) to erase. When you want
(right softkey), then highlight
Options:
Options
ᮣ
Erase Old deletes the old events, call alarms and To Do that are done.
Check All and press
.
ᮣ
Erase All deletes the all events, call alarms and To Do.
ᮣ
Erase All deletes the all To Do items.
3. Highlight Yes and press
4. Highlight Yes or No, and press
.
.
Section 2: Understanding Your Phone
98 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 99
PersonalInformationManagement
DisplayingUserAddress
Displaythecurrentuseraddressyouhavesignedin:
Checking My Profile
1. FromtheStandbymode, press
todisplaythemainmenu.
This phone can store your personal data in “Phone Info” menu. These are
including My Name, Birthday, Blood Type, Address, H Phone# (home),
H Email (home), W Phone# (work) and W Email (work).
2. HighlightPhone Info, andpress
.
3. HighlightCurrentUser, andpress
.
Editing My Profile
ᮣ
Ifyousignout, “SignedOut”appearsonthedisplay.
To edit or select your personal data
Gettingtoknow IconIndication
Youcanseetheexplanationoficonsthatappearonthedisplay.
1. From the Standby mode, press
2. Highlight Phone Info and press
3. Highlight MyPhone# and press
4. Display your phone number and press
to display the main menu.
.
.
1. FromtheStandbymode, press
2. HighlightPhone Infoandpress
3. HighlightHelpandpress
todisplaythemainmenu.
.
Profile
(right softkey).
.
5. Select the box under your desired item and press
.
4. Highlighttheitemyouwanttoseetheexplanationandpress
.
OK
6. Edit (enter) or select the data and press
or
(left softkey).
5. Theicon’sexplanationappearsandscrollsdownautomatically.
ᮣ
If the stored data consists 15 digits or more, the pop up display appears
to show the whole data until any key is pressed.
ᮣ
Use
/
oftheNavigationkeytoscrollthemessagemanually.
Displayingthe VersionInformation
Save
7. Press
(left softkey).
Displaytheversionnumberofthesoftware, hardware, PRL(Preferred
RoamingList), PRI(ProductReleaseInstructions), etc. Installedonyour
PCSPhone.
Setting Secret My Profile
In order to set My Profile data secret:
1. Display your profile list.
1. FromtheStandbymode, press
2. HighlightPhone Infoandpress
3. HighlightVersionandpress
todisplaythemainmenu.
.
Options
2. Highlight the box under MyName, and press
(right softkey).
3. Highlight SetSecret and press
.
.
4. Enter your 4-digit lock code.
5. Select On and press
.
Save
6. Press
(left softkey).
To cancel the secret setting, select Off at the step 5 above.
Tip: To display the options such as Erase or Call, highlight one of My profile
data (except My Name and Blood Type) and press
(right softkey).
Options
Section 2: Understanding Your Phone
100 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 101
Usingthe Calculator
Usingthe WorldClock
Your phone comes with a built-in calculator function. To use this feature,
follow these easy steps:
This feature is available only in digital area.
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight WorldClock and press
to display the main menu.
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight Calculator and press
to display the main menu.
.
.
.
.
4. World Clock display appears.
.
4. Enter numbers using your keypad. Press (left softkey) to insert a
ᮣ
Press or of the Navigation key for changing country.
decimal point.
5. Press the appropriate Navigation key for an arithmetic option. ( for
addition, for subtraction, for multiplication, for division)
Summer
Standard
Press
(left softkey) or
(right softkey) for changing
between summer and standard time if applicable. “ ” is shown in the
summer time.
6. Enter numbers and press
for the result.
ᮣ
CLR
To clear the numbers, press
(right softkey).
ᮣ
To end calculation, press
.
PlayingGames
To play a game on your PCS Phone:
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight CrabCatch and press
to display the main menu.
.
.
4. Highlight Normal or Off for the sound volume setting and press
(Normal setting equivalents to the ringer volume you set before. See
“Adjusting the Phone’s Volume Settings” on page 32.)
.
5. Highlight On or Off for the backlight of the display and press
.
6. Press or wait a second.
High Score display appears. If you want to erase the High Score, press
CLR
(right softkey), and highlight Yes and press
.
Start
7. Press
(left softkey) to start.
ᮣ
Press left/right of the Navigation key (or use
or
) to move
the crab to left or right to catch apples into the crab’s claw. The game is
over when three apples are not caught with the crab’s claw.
8. To end the game, press
.
Section 2: Understanding Your Phone
102 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 103
Confirming the downloaded data
DownloadingFiles
The downloaded data via Multimedia Master will be classified as ringer or
image file automatically.
YourSCP-6400hastwomethodsofdownloading:fromyourPCorthroughthe
WirelessWeb.Tousetheformer,theMultimediaMasterisrequired(youshould
purchaseseparately).AndalsothePCSWirelessConnectionKit(youshould
purchaseseparately)arerequiredtoconnectSCP-6400andyourPC.Seethe
followinginstructionsfordetailsonusingthesetwomethodsfordownloading.
To confirm the downloaded ringer file:
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight PCSync and press
4. Highlight Ringers and press
to display the main menu.
.
DownloadingfromYourPCwith
Multimedia Master
.
.
You can download images or ringers from your PC by using the
Multimedia Master (you should purchase separately). Also the PCS
Wireless Connection Kit (you should purchase separately) are required to
connect SCP-6400 and your PC. You have to prepare the status to accept
the download by using PC Sync menu of your SCP-6400. See the
Multimedia Master User guide for detailed information.
5. Highlight the downloaded data you want to hear and press
.
6. Select Play from the options and press
.
Options
ᮣ
Play to play the downloaded ringer data.
ᮣ
You can set the downloaded data to the Phone Book Entry (page 85),
Ringer Setting (pages 33-34 and 35) or Display Setting (pages 39-41).
Details to display the data information.
ᮣ
AssignRinger to assign the downloaded ringer data to the Ringer Type,
Start-up/Power-off Tone or Phone Book.
To download the ringer or image file via Multimedia Master:
1. Connect your PC to SCP-6400 by using USB data cable included in the
PCS Wireless Connection Kit.
ᮣ
Erase to erase the selected downloaded ringer data. (If the selected data
has already been assigned to any menu, the setting returns to default.)
2. Confirm the USB port to which SCP-6400 is attached.
To confirm the downloaded image file:
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. From the Standby mode, press
4. Highlight Tools/Extras and press
5. Highlight PCSync and press
6. Highlight PCSync Mode and press
to display the main menu.
.
to display the main menu.
.
.
3. Highlight PCSync and press
.
.
4. Highlight Images and press
.
7. If you’re sure to start “PC Sync”, highlight Yes and press
.
5. Highlight the downloaded data you want to see and press
.
To end the download
6. Select View from the options and press
.
1. Wait for the download to complete.
2. Prompt message appears on the display.
Options
ᮣ
View to view the downloaded image data.
3. Press
.
ᮣ
Details to display the data information.
4. Highlight Yes and press
.
ᮣ
AssignImage to assign the downloaded image data to the Incoming
Calls, Screen Saver or Phone Book.
or
Press
, highlight EndPCSync and press
.
ᮣ
Erase to erase the selected downloaded image data. (If the selected data
has already been assigned to any menu, the setting returns to default.)
ᮣ
See the Multimedia Master User guide for detailed information.
Section 2: Understanding Your Phone
104 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 105
Icon Indication
Type Item
Viewingthe DownloadedRingerData Size
Your phone lets you download 6 files of 20 KB and 1 file of 100 KB ringer
data via Multimedia Master. You can confirm the downloaded data size by
the following instructions.
Icon (appears at the left side of the
downloaded data)
From PC Ringers ( 20KB)
(New Data) (Assigned Data)
(New Data) (Assigned Data)
(New Data) (Assigned Data)
~
Ringers (20KB 100KB)
~
To view the data size:
Images ( 16KB)
~
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight PCSync and press
4. Highlight Ringers and press
to display the main menu.
.
Sorting the downloaded data in alphabetical order
The downloaded files via Multimedia Master (see page 104) are stored in
alphabetical order.
.
.
If you want to store the data in reverse chronological order, follow these
instructions.
Options
5. From the downloaded ringer data list, press
6. Highlight Size and press
(right softkey).
.
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight PCSync and press
to display the main menu.
.
7. Highlight Large (20KB~100KB), Normal (~20KB) or Both and press
.
.
8. The downloaded ringer data list is displayed as your selected data size.
4. Highlight Ringers or Images and press
.
ErasingAllDownloadedData
Options
5. Press
(right softkey).
If the selected data has already been assigned to any menu (ex. Phone
Book, Screen Saver or Ringer Type etc.), the setting returns to default.
6. Highlight Sorting from the options and press
.
Options
To erase individual downloaded data, see page 105.
ᮣ
Sorting to sort the downloaded data in reverse chronological order
(Time/Date) or alphabetical order (Name).
1. From the Standby mode, press
2. Highlight Tools/Extras and press
3. Highlight PCSync and press
4. Highlight Erase Data and press
to display the main menu.
.
ᮣ
ᮣ
Size to show the downloaded data list as your selected data size.
(Only appears in Ringers selection at the step 4 above).
Erase All to erase all downloaded data you selected at the step 4 above.
(If the selected data has already been assigned to any menu, the setting
returns to default.)
.
.
5. Highlight Ringers, Images or All and press
.
7. Highlight Time/Date and press
.
6. Highlight Yes and press
.
ᮣ
You can also erase all downloaded ringer or image data in another way.
See page 106.
Section 2: Understanding Your Phone
106 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 107
9. Press left softkey to start downloading.
DownloadingthroughWireless Web
Your SCP-6400 allows you to download images (screen savers), ringers,
games, etc. from the web site. It is also possible to download from certain
menus (Phone Book, Ringer Setting or Display Setting).
10. Wait for the download to complete.
11. Press
to end, or press left or right softkey for further operation.
ᮣ
Leftsoftkey
functions the downloaded data. (See “To confirm the
downloaded ringers folder” on pages 111-112 or “To confirm the
downloaded images (screen savers) folder” on page 112.)
To download a file from the web:
1. From the Standby mode, press
to display the main menu.
.
ᮣ
Rightsoftkey
returns to Download Homepage and you can continue
2. Highlight Downloads and press
to download.
3. Highlight your desired data folder and press
4. Highlight GetNew and press
.
To download a ringer file from Ringer Setting Menu (Ringer Type and
Start-up/Power-off Tone):
.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Sounds and press
4. Highlight RingerType and press
to display the main menu.
5. Start up a Browser and connect Download Homepage.
6. Select your desired image or ringer file, and follow the system prompts.
7. Press left softkey to start downloading.
.
.
.
8. Wait for the download to complete.
5. Highlight one item from Voice Calls, Voicemail or Messaging, and
press . The following item needs extra step.
Voice Calls select the menu under WithCallerID or NoCallerID.
9. Press
to end, or press left or right softkey for further operation.
functions the downloaded data. (See “Confirming the
ᮣ
Leftsoftkey
ᮣ
Downloaded Data” on pages 111-114.)
ᮣ
Rightsoftkey
returns to Download Homepage and you can continue
6. Select the menu under each item and press
7. Highlight GetNew and press
.
to download.
To download a file from Phone Book Entry:
.
8. Start up a Browser and connect Download Homepage.
9. Select your desired ringer file, and follow the system prompts.
10. Press left softkey to start downloading.
1. From the Standby mode, press
2. Highlight Phone Book and press
3. Highlight FindName and press
to display the main menu.
.
.
11. Wait for the download to complete.
4. Highlight the entry you want to set the downloaded ringer or image and
press
12. Press
to end, or press left or right softkey for further operation.
functions the downloaded data. (See “To confirm the
.
ᮣ
Leftsoftkey
5. Select the menu under Ringer or Image and press
6. Highlight GetNew and press
7. Start up a Browser and connect Download Homepage.
.
downloaded ringers folder” on pages 111-112.)
ᮣ
Rightsoftkey
.
returns to Download Homepage and you can continue
to download.
8. Select your desired image or ringer file, and follow the system prompts.
Section 2: Understanding Your Phone
108 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 109
If you want to download a ringer file from Start-up/Power-off Tone menu.
1. Highlight Others at the previous step 4 and press
Confirmingthe DownloadedData
.
The downloaded data will be classified as games, ringers, images (screen
savers) or application folder automatically. However, if a data has a
different category as above, they are classified as Dynamic folder. If a data
doesn’t belong to any of the above, it is classified as Others folder. You can
also confirm the downloaded data as following when you have just
finished downloading by pressing left softkey. (See “Options”)
2. Select the menu under Start-upTone or Power-offTone and press
.
3. Follow the previous steps 7 to 12.
To download an image file from Display Setting Menu (Animation,
Incoming Calls, and Screen Saver):
To confirm the downloaded games folder:
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Display and press
to display the main menu.
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Games and press
to display the main menu.
.
.
.
.
4. Highlight Animation or IncomingCalls and press
.
The following item needs extra step.
4. Highlight the downloaded data you want to confirm and press
.
ᮣ
Animation select the menu under OutgoingCalls or Service Search.
5. Select Run from the options and press
.
5. Select the menu under each item and press
6. Highlight GetNew and press
.
Options
.
ᮣ
Run to play the downloaded game.
ᮣ
7. Start up a Browser and connect Download Homepage.
8. Select your desired image file, and follow the system prompts.
9. Press left softkey to start downloading.
Settings to set the Network Access availability.
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
ᮣ
10. Wait for the download to complete.
Erase: erases the selected downloaded data.
Exit to return to the downloaded data list display.
11. Press
to end, or press left or right softkey for further operation.
functions the downloaded data. (See “To confirm the
ᮣ
ᮣ
Leftsoftkey
downloaded images (screen savers) folder” on page 112.)
To confirm the downloaded ringers folder:
ᮣ
Rightsoftkey
returns to Download Homepage and you can continue
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Ringers and press
to display the main menu.
to download.
.
If you want to download an image file from Screen Saver menu.
.
1. Highlight StandbyDisplay at the step 4 above and press
.
4. Highlight the downloaded data you want to confirm and press
5. Select Play from the options and press
.
2. Select ScreenSaver and press
.
.
3. Select the menu under ScreenSaver and press
.
4. Follow the previous steps 6 to 11.
Section 2: Understanding Your Phone
110 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 111
Options
To confirm the downloaded applications folder:
ᮣ
Play to play the downloaded ringer.
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Applications and press
to display the main menu.
ᮣ
Assign to assign the downloaded data to the Ringer Type,
Start-up/Power-off Tone or Phone Book.
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
.
.
ᮣ
4. Highlight the downloaded data you want to confirm and press
.
5. Select Run from the options and press
.
Erase: erases the selected downloaded data.
Options
ᮣ
ᮣ
Exit to return to the downloaded data list display.
Run to play the downloaded application.
ᮣ
Settings to set the Network Access availability.
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
Erase: erases the selected downloaded data.
Exit to return to the downloaded data list display.
To confirm the downloaded images (screen savers) folder:
ᮣ
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight ScreenSavers and press
to display the main menu.
.
.
4. Highlight the downloaded data you want to confirm and press
.
ᮣ
5. Select View from the options and press
.
To confirm the downloaded Dynamic folder:
Options
The downloaded data in Dynamic folder are varied. Options subject to
change.
ᮣ
View to display the downloaded image.
ᮣ
Assign to assign the downloaded data to the Incoming Calls,
Screen Saver, Phone Book entry, Outgoing Calls or Service Search.
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
1. From the Standby mode, press
to display the main menu.
2. Highlight Downloads and press
3. Highlight Dynamic-(1to10) and press
.
ᮣ
.
4. Highlight the downloaded data you want to confirm and press
5. Select Open from the options and press
.
Erase: erases the selected downloaded data.
.
ᮣ
Exit to return to the downloaded data list display.
Section 2: Understanding Your Phone
112 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 113
Icon Indication
Type Item
Options
ᮣ
Open to play the downloaded content.
Icon (appears at the left side of the
downloaded data)
ᮣ
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
From Web Ringers ( 64KB)
~
(New Data)
(New Data)
(New Data)
(New Data)
(New Data)
(New Data)
(New Data)
(New Data)
(Assigned Data)
(Assigned Data)
(Assigned Data)
(Assigned Data)
(Assigned Data)
Voice ( 64KB)
~
Screen Savers/Images ( 64KB)
~
GetPlug-in: gets Handler to work the downloaded data. (If the
downloaded data does not have Handler.)
Erase: erases the selected downloaded data.
Animation ( 64KB)
~
Animation Ringer ( 64KB)
~
Game ( 100KB)
~
Application ( 100KB)
~
Unknown type ( 64KB)
~
ᮣ
Exit to return to the downloaded data list display.
To confirm the downloaded Others folder:
The downloaded data in Others folder are varied. Options subject to
change.
Note: Download icon subject to change
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Others and press
to display the main menu.
.
Sorting the downloaded data in memory size order
The downloaded files via Web site are stored in alphabetical order. If you
want to store the data in memory size order, follow these instructions.
.
4. Highlight the downloaded data you want to confirm and press
.
1. From the Standby mode, press
to display the main menu.
.
5. Select Open from the options and press
.
2. Highlight Downloads and press
Options
3. Highlight one of each folder that includes the downloaded data you
ᮣ
Open to play the downloaded content.
want to sort.
ᮣ
Options to select the options of the downloaded data.
Properties: shows the downloaded data property.
Online Info.: shows the downloaded data information online.
Shop: allows you to continue downloading.
4. Press
.
Options
5. Press
(right softkey).
6. Highlight Sorting from the options and press
.
GetPlug-in: gets Handler to work the downloaded data. (If the
downloaded data does not have Handler.)
Erase: erases the selected downloaded data.
Options
ᮣ
Sorting to sort the downloaded data in alphabetical (Name) or
memory size (Size) order.
ᮣ
Exit to return to the initial display.
ᮣ
ᮣ
Icon/Size to show the downloaded data list with memory size.
Erase All to erase all downloaded files you selected at the step 3.
(Downloaded data that has already been assigned cannot be erased.)
7. Highlight Size and press
.
Section 2: Understanding Your Phone
114 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 115
Erasing an old downloaded data for getting new download data
Viewingthe DownloadedData Size
This feature allows you to confirm each downloaded data size and the rest
of the download capacity.
If you try to download new data when the download data’s memory is full,
the warning message appears. And you will be prompted to erase some old
downloaded data.
To view the data size:
To get new download data:
1. From the Standby mode, press
to display the main menu.
.
Erase
1. When the warning message appears, press
(left softkey) to
2. Highlight Downloads and press
make a space for new download data. (Press right softkey to cancel the
download.)
3. Highlight one of each folder that includes the downloaded data you
want to confirm and press
.
2. Highlight one of each folder that includes the data you want to erase.
Options
4. Press
(right softkey).
3. Press
4. Highlight the data you want to erase and press
5. Highlight Yes and press
6. You can continue to download the new file.
.
5. Highlight Icon/Size and press
.
Erase
(left softkey).
6. Data size is displayed at the left of the downloaded data name.
To return the display to the icon indication, repeat the step 4 and 5
above.
.
ᮣ
Viewing the download memory space
This feature allows you to confirm how much download memory is left
and used.
To view the memory space:
1. From the Standby mode, press
2. Highlight Downloads and press
Options
to display the main menu.
.
3. Press
(right softkey).
4. Highlight View Memory and press
.
5. Used and Free memory size are displayed.
Section 2: Understanding Your Phone
116 2H: Personal Organizer
Section 2: Understanding Your Phone
2H: Personal Organizer 117
Section 2I
Using Your Phone’s
Voice Services
In This Section
ᮣ
Using Voice-Activated Dialing
Recording Memos
ᮣ
his section explains the features associated with your phone’s
TVoice Services. The easy-to-follow instructions explain how to make calls
and record memos.
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 119
118
Reviewing Voice Dialing Tags
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight Voice Dial and press
4. Highlight Review and press
UsingVoice-ActivatedDialing
In addition to PCS Voice CommandSM (see pages 167-169), you can use a
Voice Dial tag to automatically dial a phone number in your Internal
Phone Book. Your phone can store up to 30 Voice Dial tags.
(To create a Voice Dial tag, see “Programming Voice Dial Tag to Your
Phone” on page 120.)
to display the main menu.
.
.
.
5. Highlight the desired entry and press
or
Highlight the desired entry and press
.
To use a Voice Dial tag to call a phone number:
1. From the Standby mode, press
shortly.
Options
(right softkey).
2. Follow the voice prompts and recite the entry’s Voice Dial tag into your
phone’s microphone.
Highlight Play and press
.
ᮣ
Highlight Erase at the step 5 above, and then select Yes to erase voice
Note: Record Voice Dial tags in a quiet environment and without the aid
of an accessory (for example, a headset or Hands-Free Car Kit).
dial tag.
ErasingAllVoice DialTags
ProgrammingVoice DialTagtoYourPhone
To erase all voice dial tags:
To program a voice dial tag:
1. From the Standby mode, press
2. Highlight VoiceService and press
to display the main menu.
.
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight Voice Dial and press
4. Highlight Program and press
to display the main menu.
.
3. Highlight Voice Dial and press
.
.
4. Highlight Erase All and press
.
.
5. Highlight Yes and press
.
5. The phone will prompt you to say the name you want to program.
Wait for the beep and then say the name.
6. Respond to the prompt by repeating the name after the beep.
7. Enter or highlight the entry (name) in the phone book entry list.
8. Press
.
9. Select the labeled category that includes your desired phone number.
Then display shows “Voice Dial Recorded”.
Section 2: Understanding Your Phone
120 2I: Using Your Phone’s Voice Services
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 121
It also stops recording when the other party hangs up the call.
RecordingMemos
To record a memo in Standby mode:
ᮣ
Recording Memo is disabled while you are in Analog Service area.
ᮣ
When the recording capacity is full, highlight old memo, and press
1. Press and hold
. Starts recording after the beep.
Options
(right softkey) and select Erase, and press
.
OR
Tip:While recording, if you receive an incoming call or the service area has
changed, the recording is stopped automatically.
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight Voice Memo and press
4. Highlight Record and press
5. Start recording after the beep.
To end the recording of your memo:
to display the main menu.
.
.
Note:Your phone can store a total of 8 memos for 18 seconds each.
.
MemoOptions
To play the memos you have recorded:
1. From the Standby mode, press
to display the main menu.
1. Wait for 18 seconds or press
,
or
while recording.
2. Highlight VoiceService and press
.
.
OR
3. Highlight Voice Memo and press
1. Press
when recording in Standby mode.
ᮣ
Press
shortly for the shortcut step 1 to 3 above.
To record a conversation during a phone call:
4. Highlight Play and press
.
1. Press and hold
. Starts recording after the beep.
5. Highlight one memo from the list.
or
Highlight All if you want to play all memos continuously.
OR
1. Press
to see the options.
2. Highlight Voice Services and press
3. Highlight Voice Memo and press
.
6. Press
.
.
ᮣ
You can change the speed of message playing by pressing
4. Highlight Record and press
.
Slow
Fast
(left softkey) or
(right softkey).
ᮣ
ᮣ
5. Start recording after the beep.
Wait for ending or press
to stop playing.
Options
Press
(right softkey), highlight Erase at the step 5 above, and
To end the recording of your conversation:
then select Yes to erase your desired memo.
1. Wait for 18 seconds or press
,
or
while recording.
Tip:Voice Memo is stored with the date and time stamp in reverse
chronological order except when it’s recorded in no service area.
OR
1. Press
and disconnect the call when recording in Use State.
Section 2: Understanding Your Phone
122 2I: Using Your Phone’s Voice Services
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 123
ErasingAllMemos
SettingUpScreenCall
This feature enables you to answer incoming calls by using pre-recorded
announcements, either one that is pre-recorded or one that you record.
You can also record the caller’s message into the Voice Memo list (See
“Recording Memos” on pages 122-123). You can decide whether you
answer the call immediately or not during the caller’s recording.
To erase all memos:
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight Voice Memo and press
to display the main menu.
.
.
4. Highlight Play and press
.
Activating Screen Call
Options
5. Display the memo list, highlight All and press
(right softkey).
To start Screen Call when you have incoming calls:
6. Highlight Erase All and press
7. Highlight Yes and press
OR
.
.
1. Press
to display the options.
.
2. Highlight ScreenCall and press
.
OR
1. From the Standby mode, press
to display the main menu.
1. Press and hold
.
2. Highlight VoiceService and press
3. Highlight Voice Memo and press
4. Highlight Erase All and press
.
To set Auto Screen Call:
.
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight ScreenCall and press
to display the main menu.
.
5. Highlight Yes and press
.
.
Note: To erase individual memos, see “Memo Options” on page 123.
4. Highlight Auto and press
.
5. Highlight On and press
.
ᮣ
If you want to change the answer time, enter your desired number
(from 1 to 16 seconds) by using numeric keys or up/down of the
Navigation key.
OK
6. Press
or
(left softkey). Then the icon is displayed on the
Standby display.
Tip:If new caller’s message is waiting,
appears on the display. The
memos recorded while activating “Screen Call” are shown with “√” or “!”
icon in the list. (“√”: once played, !: not played yet)
Tip:While the caller ’s recording:
Pressing
Pressing
stops recording and disconnects the call.
answers call.
Section 2: Understanding Your Phone
124 2I: Using Your Phone’s Voice Services
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 125
Selecting Announcement for Screen Call
Recording Customized Announcement
1. Follow the steps 1 to 4 on the previous page.
Options
1. From the Standby mode, press
2. Highlight VoiceService and press
3. Highlight ScreenCall and press
4. Highlight Announcement and press
to display the main menu.
.
2. Highlight Custom and press
(right softkey).
.
3. Highlight Record and press
.
ᮣ
When your name has already been recorded, select Yes or No for
.
overwriting.
5. Depending on your preference, highlight Pre-Recorded or Custom.
6. Press
4. Press
to start the 1st recording.
again to start the 2nd recording.
.
5. After the 1st recording, press
Recording Name for Pre-Recorded Announcement
6. To stop recording, wait for 12 seconds or press
.
1. From the Standby mode, press
to display the main menu.
ᮣ
Erasing the recorded announcement, select Erase at the step 3 above.
2. Highlight VoiceService and press
3. Highlight ScreenCall and press
4. Highlight Announcement and press
5. Highlight Pre-Recorded and press
.
ᮣ
Playing the customized announcement, select Play at the step 3 above.
.
.
Options
(right softkey).
6. Highlight RecordName and press
.
ᮣ
When your name has already been recorded, select Yes or No for
overwriting.
7. Press
to start the 1st recording.
to start the 2nd recording.
8. After the 1st recording, press
9. To stop recording, wait for 12 seconds or press
.
ᮣ
Erasing the recorded name, select Erase Name at the step 6 above.
ᮣ
Playing the pre-recorded announcement, select Playat the step 6 above.
Section 2: Understanding Your Phone
126 2I: Using Your Phone’s Voice Services
Section 2: Understanding Your Phone
2I: Using Your Phone’s Voice Services 127
Section 3
Using PCS
Service Features
Section 3
Using PCS Service Features 129
128
Section 3A
PCS Service Features:
The Basics
In This Section
ᮣ
Using Voicemail
ᮣ
Using Caller ID
ᮣ
Responding to Call Waiting
ᮣ
Three-Way Calling
ᮣ
Forwarding Your Calls
ow that you’ve mastered your phone’s fundamentals, it’s time to explore
Nthe calling features that enhance your PCS Service.
Section 3: Using PCS Service Features
130
3A: The Basics 131
New VoicemailMessage Alerts
UsingVoicemail
When you receive a new voicemail message, your phone alerts you and
prompts you to call your voicemail. To call your voicemail, press
SettingUpYourVoicemail
.
All unanswered calls to your PCS Phone are automatically transferred to
voicemail, even if your phone is in use or turned off. Therefore, you will
want to set up your PCS Voicemail and personal greeting as soon as your
PCS Phone is activated.
OK
(left softkey).
To display your Voicemail menu, press
or
Important: When you are roaming off the Sprint Nationwide PCS
Network, you may not receive notification of new voicemail messages.
It is recommended that you periodically check your voicemail by dialing
1 + area code + your PCS Phone Number. When your voicemail answers,
To set up voicemail:
press
and enter your pass code. You will be charged roaming
rates when accessing voicemail while roaming off the Sprint Nationwide
PCS Network.
1. Press and hold
.
2. Follow the system prompts to create your pass code, record your
greeting, record your name announcement and choose whether to
activate One-Touch Message Access (a feature that lets you press one
key to access messages and bypasses the need for you to enter your
pass code).
Note: Your phone accepts messages even when it is turned off.
However, you are only notified of new messages when your phone is
turned on and you are in a PCS Service Area.
RetrievingYourVoicemailMessages
Note: The voicemail setup process may vary in certain Affiliate areas.
You can review your messages directly from your PCS Phone or from any
other touch-tone phone. To dial from your PCS Phone, you can either
speed dial your voicemail or use the menu keys.
VoicemailNotification
There are several ways your PCS Phone alerts you:
Using One-Touch Message Access:
ᮣ
By displaying a message on the screen.
ᮣ
Press and hold
. Follow the system prompts.
ᮣ
By sounding the assigned ringer type.
ᮣ
By the LED blinking red.
Usingthe MenuKeys onYourPCSPhone toAccess YourMessages:
ᮣ
By displaying
for Messages.
at the top of your screen for voicemail messages or
1. From the Standby mode, press
2. Highlight Voicemail and press
3. Highlight CallVoicemail and press
to display the main menu.
.
.
Note: You are charged for airtime minutes when you are accessing your
voicemail from your PCS Phone.
Using a Phone Other Than Your PCS Phone to Access
Your Messages:
1. Dial your PCS Phone Number.
2. When your voicemail answers, press
.
3. Enter your pass code.
Section 3: Using PCS Service Features
132 3A: The Basics
Section 3: Using PCS Service Features
3A: The Basics 133
Voicemail-to-Voicemail Message Forwarding
VoicemailOptions
Forward a voice message, except those marked “Private,” to other
PCS Voicemail customers.
Your PCS Phone offers several options for organizing and accessing
your voicemail.
1. After listening to a message, press
.
Setting Up Group Distribution Lists
2. Follow the voice prompts to enter the phone number.
Create up to 20 separate group lists, each with up to 20 customers.
3. Follow the voice prompts to record your introduction and forward the
1. Press and hold
to access your voicemail.
voice message.
2. Following the system prompts, press
to change your
Voicemail-to-Voicemail Receipt Request
Personal Options.
Receive confirmation that your voice message has been listened to when
you send, forward or reply to a message to other PCS customers.
3. Press
for Administrative Options.
for Group Distribution Lists.
4. Press
1. After you have recorded a message, press
satisfied with the message you recorded.
to indicate you are
5. Follow the voice prompts to create, edit, rename or delete group lists.
PCS Callback
2. Press
to mark receipt requested.
Return a call after listening to a message without disconnecting
from voicemail.
Continue Recording
ᮣ
Before pressing
to indicate you are satisfied with the message
to continue recording.
1. After listening to a message, press
.
you recorded, press
2. Enter the phone number.
Extended Absence Greeting
3. Once the call is complete, you’re returned to the voicemail main menu.
Voicemail-to-Voicemail Message
When your phone is turned off or you are off the Sprint Nationwide
PCS Network for an extended period, this greeting can be played instead of
your normal personal greeting.
Record and send a voice message to other PCS Voicemail customers.
1. From the main voicemail menu, press
for Personal Options.
1. From the main voicemail menu, press
to send a message.
2. Press
for Greetings.
to record an Extended Absence Greeting.
2. Follow the voice prompts to enter the phone number.
3. Follow the voice prompts to record and send your voice message.
Voicemail-to-Voicemail Message Reply
3. Press
Reply to a voice message received from any other PCS Voicemail customer.
1. After listening to a voice message, press
.
2. Follow the voice prompts to record and send your reply.
Section 3: Using PCS Service Features
134 3A: The Basics
Section 3: Using PCS Service Features
3A: The Basics 135
To respond to an incoming call while you’re on a call:
Clearingthe Message Icon
ᮣ
Press
(or press
, highlight Flash and press
).
Your phone may temporarily continue to display the icon after you have
checked your voice and text messages.
This puts the first caller on hold and answers the second call.
ᮣ
To clear the icon from the display screen:
To switch back to the first caller, press
Flash and press ) again.
(or press
, highlight
1. From the Standby mode, press
2. Highlight Voicemail and press
3. Highlight ClearCount and press
to display the main menu.
Tip: For those calls where you don’t want to be interrupted, you can
.
.
temporarily disable Call Waiting by pressing
placing your call. Call Waiting is automatically reactivated once you end
the call.
before
4. Highlight Yes and press
.
UsingCallerID
Makinga Three-WayCall
Caller ID lets you know who’s calling by displaying the number of the
person calling when your phone rings. Similarly, if you call someone who
has this feature, your phone number displays on their phone. If the
caller’s name and number are already stored in your Internal Phone
Book, the corresponding name appears with the number.
With Three-Way Calling, you can talk to two people at the same time.
When using this feature, the normal airtime rates will be charged for each
of the two calls.
1. Enter a number you wish to call and press
.
2. Onceyouhaveestablishedtheconnection, press
(orpress
,
To block your phone number from being displayed for a specific
outgoing call:
highlightThree-WayCallandpress
)toputthefirstcalleronhold.
3. Dial the second number you wish to call.
1. Press
2. Enter the number you want to call.
3. Press
.
4. Press
(or press
, highlight Call and press
).
5. When you’re connected to the second party, press
once more (or
.
press
call.
, highlight Flash and press
) to begin your three-way
To permanently block your number, call PCS Customer Service Solutions.
If one of the people you called hangs up during your call, you and the
remaining caller stay connected. If you initiated the call and are the first
to hang up, all three callers are disconnected.
RespondingtoCallWaiting
Call Waiting alerts you to incoming calls while you’re on a call by
sounding beeps. The display screen informs you that a call is coming in
and shows the caller’s phone number (if it is available and you are in
digital mode).
Tip: You can also select a phone number from Internal Phone Book,
Call History or Messages, etc. by pressing
phone number at the step 3 above.
before you enter a
Note: Call Waiting and Three-Way Calling are not available while
roaming off the Sprint Nationwide PCS Network.
Section 3: Using PCS Service Features
136 3A: The Basics
Section 3: Using PCS Service Features
3A: The Basics 137
Section 3B
UsingCallForwarding
Call Forwarding lets you forward all your incoming calls to another
phone number – even when your phone is turned off. You can continue to
make calls from your phone with Call Forwarding activated.
SM
PCS Vision
To Activate Call Forwarding
1. Press
.
In This Section
2. Enter the area code and phone number to which your future calls
should be forwarded.
ᮣ
Web
ᮣ
Messaging
3. Press
. You will hear a tone to confirm the activation of
Call Forwarding.
ᮣ
Ringers
To Deactivate Call Forwarding
ᮣ
Screen Savers
1. Press
.
ᮣ
Games
2. Press
. You will hear a tone to confirm the deactivation.
PCS Business ConnectionSM
ᮣ
Note: You are charged a higher rate for calls you have forwarded.
CS VisionSM brings you clarity you can see and hear, with enhanced,
Palways-on mobile multimedia capabilities like email, games that are easy
to learn and use. It’s a revolutionary way to look at wireless.
Section 3: Using PCS Service Features
138 3A: The Basics
Section 3: Using PCS Service Features
3B: PCS Vision 139
NetGuard
Browsingthe WebonYourPhone
When first connecting to the Internet, the Net Guard will appear to
confirm that you want to connect. It helps you avoid accidental
connections. You can avoid the Net Guard in the future by checking the
OK
Launchingthe Web
box at the side of Always Auto-Connect and press
(left softkey)
To launch the Web:
1. From the Standby mode, press
OR
when the Net Guard appears.
Web
(left softkey).
To change your Net Guard settings:
1. From the Standby mode, press
2. Highlight Web and press
to display the main menu.
1. From the Standby mode, press
2. Highlight Settings and press
3. Highlight Internet and press
4. Highlight NetGuard and press
to display the main menu.
.
.
You are automatically signed in to PCS Vision Services, when you sign-in
manually, see page 57 for instructions.
.
.
YourUserName
5. Select On or Off, and press
.
ᮣ
When you buy a PCS Phone and sign up for service, you’re automatically
assigned a user name. Then, when you use PCS Vision Services, your user
name is submitted to identify you to the Sprint Nationwide PCS Network.
The user name is also useful as an address for email as a way to
personalize Internet services, and as an online virtual identity.
Onto make the Net Guard appear when connecting to the Internet.
ᮣ
Off to avoid the Net Guard when connecting to the Internet.
Note: When On, the Net Guard will appear only once per session. The
Net Guard does not appear if the phone is merely re-connecting due to a
time-out.
A user name is typically based on the customer’s name and a number,
followed by “@sprintpcs.com.” For example, the third John Smith to
sign up for PCS Vision Services might have [email protected]
as his user name. If you want a particular user name, you can visit
www.sprintpcs.com and get the name you want – as long as nobody
else has it!
Note: If you already have a PCS Mail User Name, that will automatically
become your PCS Vision User Name.
Your user name will be automatically programmed into your PCS Phone.
You don’t have to enter it.
Section 3: Using PCS Service Features
140 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 141
Going Back
Browsingthe Web
ᮣ
To go back one page, press
.
Browsing the Web is easy once you’ve learned a few basics. Here are some
tips for browsing the Web with PCS Vision:
Going Home
ᮣ
Softkeys
To return to the Home Page, go to the Browser Menu and highlight
OK
Home then press
(left softkey).
The bottom line of the browser contains a row of softkeys. These are your
main controls for getting around.
Going to a Specific Web Site
To activate a softkey:
ᮣ
To go to a particular Web site by entering a URL (Web site address), select
GotoURL from the list of options and enter the URL using your keypad.
Press
(left) or
(right) softkey, which corresponds to the
softkey that appears on the bottom line of the MiniBrowser.
Note: Not all Web sites are viewable on your phone.
Scrolling
Creating a Bookmark
As with other parts of your phone’s menu, you’ll have to scroll up and
down to see everything on some Web sites.
ᮣ
Bookmarks allow you to store the address of favorite Web sites for easy
access at a later time.
Press the navigation key up or down to scroll line by line.
To create a bookmark:
Selecting
1. Go to page you want to mark.
Once you’ve learned how to use softkeys, you can start navigating
Web sites.
ᮣ
2. Press right softkey to be in the Browser menu.
3. Select Markthis page and press left softkey.
4. Follow the onscreen prompts to save the bookmark.
Select on-screen items by using the Navigation key to highlight the
desired item, then press appropriate softkey (left or right
)
You’ll find that the left softkey is used primarily for selecting items. The
Note: Bookmarking a page does not store the page contents, just
softkey is often labeled “OK”. You can also press
ᮣ
for selecting items.
its address.
If the items on a page are numbered, you can also use your keypad
(number keys) to select an item.
Note: Some pages cannot be bookmarked. Whether a particular Web
page may be marked is controlled by its creator.
Links, which appear [in brackets], allow you to jump to different wireless
Internet pages, select special functions or even place phone calls.
ᮣ
Accessinga Bookmark
Select links by highlighting the link, and then activating the
1. Go to page, and press right softkey.
appropriate softkey, which is usually (but not always) the left softkey.
2. Highlight More Options and press left softkey.
3. Highlight View Bookmarks and press left softkey.
4. Highlight the bookmark you want to display and press left softkey.
Tip: The tenth item in a numbered list may be selected by pressing the
key on your phone’s keypad, even though the number 0 doesn’t
appear on the screen.
Section 3: Using PCS Service Features
142 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 143
Deleting a Bookmark
SettingUpa WebConnection
1. From the bookmark list, select the bookmark you want to delete and
press right softkey.
Getting Started
Your PCS Phone allows you to connect to a laptop PC to send and receive
email, access the Internet or your company’s network and more, without
searching for a wall-mounted telephone jack. In just three steps, you can
use your connectivity:
2. Highlight Delete and press left softkey.
3. Highlight Yes and press left softkey.
ᮣ
If you want to delete all bookmarks, highlight Delete All at the step 3
above.
1. First, you’ll need a PCS Connection Kit (sold separately).
Reloading a Web Page
2. Connect your laptop PC to your PCS Phone by using the USB data cable.
1. To reload (refresh) the current Web page, press right softkey and select
More Optinons and press left softkey.
3. Finally, take a few minutes to install the PCS Connection ManagerSM
Software onto your computer using the CD.
2. Highlight Refreshthis page and press left softkey.
ᮣ
For complete details on how to install and use the software, refer to the
Restarting the Web Browser
user guide in the PCS Connection Kit you purchased.
If the Web browser appears to be malfunctioning or stops responding, you
can usually fix the problem by simply restarting the browser.
Placinga Data Call
To place a data call when you’re connected to the Web:
1. First, make sure the cable is connected properly.
2. Open the PCS Connection ManagerSM Software on your computer and
1. To restart the Web browser, press right softkey and select More Options
and press left softkey.
2. Highlight RestartBrowser and press left softkey.
Recent Pages
place the call.
ᮣ
Once the call successfully connects, your phone’s display shows you
Use the Recent Pages feature to revisit recently visited Web pages.
To go to a recently visited Web page:
information on the status of the data call.
1. Press right softkey and select More Options and press left softkey.
2. Highlight RecentPages and press left softkey.
3. Highlight the desired Web page title and press left softkey.
4. Press left softkey to go to the site.
Section 3: Using PCS Service Features
144 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 145
DisplayingMessages
Messaging
To display a Message from the message notification alert, see
“New Messages” on page 146.
Now you can send and receive email as well as chat on select PCS Phones.
With chat, you can have a conversation without talking. Join in a Web-
based chat room to exchange information on a specific topic or read
conversations that others have posted -- even launch a one-on-one chat
for a more in-depth conversation.
To display a Message from the main menu:
1. From the Standby mode, press
2. Highlight Messaging and press
3. Highlight Notifications and press
to display the main menu.
.
. Then the folder list appears.
Message Types
4. Highlight Unfiled or your defined folder and press
.
There are many types of PCS Text Messaging available on your phone.
(PCS Voicemail provides voicemail-to-mailbox messaging. For
information on using your phone’s voicemail feature, see “Using
Voicemail” on pages 132-136.)
5. Highlight the header of the message you want to see and press
.
An icon appears at the left side of each header of the message. The icons
are as follows.
PCSMessages
These appear on your screen as Notifications and include numeric
messages, PCS Messages, PCS Updates and PCS Mail.
New message
Urgent message
Read message
New Messages
If the sender’s information has already been stored in the phone book, the
corresponding name or phone number appears as the header of the
message. If nothing has been stored, the phone number or text that was
included in the message appears as a header of the message.
When you receive a new Message, your phone alerts you and
View
press
(left softkey) to display the message details.
ᮣ
Call
Press
(left softkey) to dial the phone number.
(left softkey) to go to the web site.
To read other messages:
ᮣ
ᮣ
Go
Press
Press
ᮣ
Press left of the Navigation key to read the previous message.
Cancel
(right softkey) to return to the message folder list.
ᮣ
Press right of the Navigation key to read the next message.
Message Storage
Changingthe DisplayingFontSize ofa Message
Your PCS Phone can store up to 200 Messages. When the message memory
is 90% full, a warning message prompts you to erase messages to obtain
additional memory space.
After you display a Message, press
To adjust the displaying font size:
to display message options.
Note: Unread messages will not be automatically deleted when
Messages capacity has been reached. If your phone has 200 messages,
any new text messages will be returned.
1. Highlight FontSize by scrolling, and press
.
2. Highlight your desired font size, and press
.
Section 3: Using PCS Service Features
146 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 147
3. Highlight the number you wish to extract.
4. Press to display the options.
Message Options
After you display a Message, press
select an option, highlight it and press
to display message options. To
.
5. To select an option, highlight it and press
ᮣ
.
ᮣ
CallBack to dial the phone number of the sender (if applicable).
Call to dial the phone number.
ᮣ
Save Phone# to save the sender’s phone number if it is not already in
your Internal Phone Book (if applicable). Or if the sender’s phone
number has already been stored in the any Phone Book entry,
Alternate appears instead of Save Phone#.
ᮣ
Save Phone# to save the phone number if it is not already in your
Internal Phone Book. Or if the phone number has already stored in the
Phone Book entry, Alternate appears instead of Save Phone#.
ᮣ
ᮣ
DisplayPhone# to display the phone number.
ᮣ
ᮣ
Prepend to add numbers to the beginning of the phone number (if
applicable). (See “Prepending a Phone Number From a Message” on
page 149.)
Prepend to add numbers to the beginning of the phone number.
Prependinga Phone NumberFroma Message
ExtractInfo. to extract phone numbers, email or web addresses (if there
are numbers or addresses contained in the text message).
(See pages 148-149 and 150.)
After you display a Message, press
to display message options.
If you happen to be outside your local area code and need to add a prefix to
a phone number:
ᮣ
ᮣ
Erase to erase the message.
1. Highlight Prepend and press
2. Enter the digits or pauses (see below) you want to add to the number. If
you want to save the number, press and select the Save Phone#
option. If not, the changes only apply to the current call.
.
AddFolder to add a folder. (See “Adding a Folder for Messages” on
page 152.)
ᮣ
ᮣ
Move Message to move the message into the other folder. (See
“Moving a Message Into the Other Folder” on page 152.)
3. Press
to display the options.
FontSize to adjust the font size depending on your preference. (See
“Changing the Displaying Font Size of a Message” on page 147.)
4. To select an option, highlight it and press
ᮣ
.
Call to dial the phone number.
Note: If the incoming message dose not have a call back number, “Call
Back”, “Alternate/Save Phone#” and “Prepend” are not shown.
ᮣ
Save Phone# to store the phone number in your Internal Phone Book.
ᮣ
ᮣ
H HardPause to insert a hard pause. (See “Dialing and Saving Phone
Numbers With Pauses” on page 28.)
ExtractingPhone Numbers Froma Message
After you display a Message, press
message options.
to display
T 2-SecondPause to insert a 2-second pause. (See “Dialing and
Saving Phone Numbers With Pauses” on page 28.)
To extract a phone number contained in the message:
1. Highlight ExtractInfo., and press
.
2. Highlight Phone# and press
.
All the phone numbers contained in the message are displayed. (If
there are no phone numbers to extract from the message, the numbers
are not displayed.)
Section 3: Using PCS Service Features
148 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 149
ExtractingE-MailAddresses Froma Message
To extract an email address contained in a message:
CreatingFolders forMessages
You can create up to ten folders to store your Messages. If 10 user defined
folders exist, “Create Folder” menu diappears.
1. When the Message options are displayed, highlight ExtractInfo., and
press
.
1. From the Standby mode, press
2. Highlight Messaging and press
3. Highlight Notifications and press
to display the main menu.
2. Highlight EmailAddress and press
.
.
All the email addresses contained in the message are displayed.
(If there are no appropriate email addresses to extract from the
message, the addresses are not displayed.)
. Then the folder list appears.
Options
4. From the folder list display, press
(right softkey).
3. Highlight the address you wish to extract.
5. Highlight Create Folder and press
.
4. Press
to display the options.
OK
(left
6. Enter a folder name from 3 to 13 letters and press
or
5. To select an option, highlight it and press
ᮣ
.
softkey). See “Selecting a Character Input Mode” on pages 76-77.
SendEmail to send email.
ᮣ
Save
Pressing
(left softkey) allows you to save the folder name.
ᮣ
DisplayAddress to display the email address.
7. If you want the message to be filed into the folder automatically, select
the menu under AutoFiling and press
ᮣ
Save Address to save the email address if it is not already in your
Internal Phone Book. Or if the email address has already stored in the
Phone Book entry, Alternate appears instead of Save Address.
.
8. Highlight On and press
.
9. Select the box under Keyword by scrolling down and press
.
ExtractingURLs Froma Message
OK
10. Enter a keyword from 3 to 14 letters and press
or
(left softkey).
To extract a site address contained in a message:
1. When the Message options are displayed, highlight ExtractInfo., and
Save
11. Press
(left softkey).
press
.
If you want to set optional feature to the added folder:
1. From the step 9 above, scroll down to select other menu options.
Highlight the menu under each item and press
2. Highlight WebAddress, and press
.
All the web addresses contained in the message are displayed.
(If there are no appropriate web addresses to extract from the message,
the addresses are not displayed.)
.
ᮣ
Notify to select displaying the notification to on or off when you have a
message matching the defined folder.
3. Highlight URL you wish to extract.
ᮣ
Envelope Icon to select displaying the envelope icon to on or off when
4. Press
to display the options.
you have a message matching the defined folder.
5. To select an option, highlight it and press
ᮣ
.
Save
2. After selecting the each setting, press
(left softkey).
VisitSite to visit the web site.
ᮣ
DisplayAddress to display the web address.
ᮣ
Save Address to save the web address if it is not already in your
Internal Phone Book. Or if the web address has already stored in the
Phone Book entry, Alternate appears instead of Save Address.
Section 3: Using PCS Service Features
150 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 151
Addinga FolderforMessages
EditingFolders
When the message contains any word of 3 to 14 letters, you can classify the
message to your defined folder. If 10 user defined folders exist, “Add Folder”
menu disappears.
To edit a folder:
1. From the folder list display, highlight the folder you want to edit.
Options
2. Press
(right softkey).
1. After you display a message, press
to display message options.
3. Highlight EditFolder and press
.
2. Highlight AddFolder by scrolling and press
.
4. Select the box under your desired option to edit, and press
.
OK
(left
3. Enter a folder name from 3 to 13 letters and press
or
ᮣ
softkey). See “Selecting a Character Input Mode” on pages 76-77.
FolderName to edit the folder name.
ᮣ
4. If you want the message to be filed into the folder automatically, select
AutoFiling to set auto filing to on or off.
the menu under AutoFiling and press
5. Highlight On and press
6. Select the box under Keyword by scrolling down and press
.
ᮣ
Keyword to change the folder’s keyword. Incoming messages are
automatically filtered into the folder if they contain the Keyword you
enter.
.
.
ᮣ
ᮣ
Notify to change the notification setting to on or off.
7. Enter a keyword and press
or
.
Envelope Icon to change the icon setting to on or off.
Go to KeywordMatch and press
KeywordMatch list.
. Select a keyword from the
5. Enter or select new folder name/setting.
OK
(left softkey).
6. Press
or
Save
8. Press
(left softkey).
Save
7. Press
(left softkey).
If you want to set optional feature to the added folder:
1. From the step 6 above, scroll down to select other menu options.
Erasinga FolderIncludingMessages
1. From the folder list display, highlight the folder you want to erase.
Options
Highlight the menu under each item and press
.
ᮣ
ᮣ
Notify to select displaying the notification to on or off when you have a
message matching the defined folder.
2. Press
(right softkey).
3. Highlight Erase Folder and press
4. Highlight Yes and press
.
Envelope Icon to select displaying the envelope icon to on or off when
you have a message matching the defined folder.
.
Save
2. After selecting the each setting, press
(left softkey).
Note: The messages within the folder are also erased.
If the folder contains a new message, you are prompted to select Erase
Movinga Message Intothe OtherFolder
or Don’t Erase
.
After you display a Message, press
need at least one defined folder.
to display message options. You
If you want to move a message into the other folder:
1. Highlight Move Message by scrolling and press
.
2. Highlight your desired folder and press
.
Section 3: Using PCS Service Features
152 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 153
ErasingAllMessage
s
PCSShortMail
To erase all messages:
UsingPCSShortMail
Options
1. From the folder list display, press
menu options.
(right softkey) to display the
.
With PCS Short Mail, you can use a person’s wireless phone number to
send instant text messages from your Internet-ready PCS Phone to their
messaging-ready phone – and they can send messages to you. When you
receive a new message, you’ll automatically be notified with a one-way
text message.
2. Highlight Erase AllMsgs and press
3. Highlight InThis Folder or InAllFolders and press
4. Highlight Yes and press
.
.
To erase all Messages already read:
In addition, PCS Short Mail includes a variety of pre-set messages, such as
“I’m running late, I’m on my way,” that make composing messages fast
and easy. You can also customize your own pre-set messages, up to 100
Options
1. From the folder list display, press
menu options.
(right softkey) to display the
.
2. Highlight Erase OldMsgs and press
To send a PCS Short Mail message:
3. Highlight InThis Folder or InAllFolders and press
4. Highlight Yes and press
.
1. Launch the PCS Wireless Web on your PCS Phone.
.
2. From the PCS Wireless Web Home Page, select the Messaging folder
and press left softkey.
Note: If the folder contains a new message, you are prompted to select
Erase or Don’t Erase
.
3. Select ShortMail and press left softkey.
Note: To erase an individual message, see “Message Options” on
page 148.
4. Select Compose, enter the PCS Phone Number of the person to whom
you wish to send a message.
5. Select Type Msg (to enter a message up to 256 characters),
SigningUpforPCSUpdates
Pre-SetMsgs (to select a preset message) or Icons and press left softkey.
With PCS Updates, you can have news and information sent directly to
your PCS Phone at the times you choose.
6. Enter your text or select a pre-set message or icon and press left softkey.
To select the information you want sent to your PCS Phone:
SEND
7. To send the message, and press
(left softkey).
1. From your computer, log on to the Internet.
2. Go to the site from which you want to receive information. A few of the
sites you can visit are America Online®, Yahoo!®, MSN® and ebay®.
(The location where you request updates within each site will vary.)
3. Where indicated on the site, input your 10-digit PCS Phone Number
followed by “@messaging.sprintpcs.com.” For example:
Upon completing the registration process, you should begin receiving
updates on your PCS Phone as requested.
Section 3: Using PCS Service Features
154 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 155
To read a PCS Short Mail message:
Email
1. When you receive a short mail message, you will see a text message and
“New ‘Short Mail’. View it now?” on your display screen.
UsingPCSEmail
2. Launch the browser and select the Messaging folder.
With PCS Email, you can set up an account at no additional charge and
perform many of the typical email functions from your PCS Phone that
you can from your personal computer.
3. Scroll to the new short mail message and press left softkey. Unread short
mail messages will be marked with an asterisk (*). Select a marked
message and press left softkey again to read the message.
You can manage your PCS Email Account from your PCS Phone or
select email providers from the Web.
Note: The last four digits of the PCS Phone Number of the person who
sent you a short mail message appear before the message text.
AccessingPCSEmailMessages
To access PCS Email Messages:
To reply to a PCS Short Mail message:
1. While the message is open, scroll to Reply and press left softkey.
1. From the Web home page, select the Messaging folder, and
2. Select Type Msg(to enter a message up to 100 characters),
OK
(left softkey)
press
.
Pre-SetMsgs (to select a preset message) or Icons and press left softkey.
2. From the Messaging folder, select Email, and press left softkey. If you’re
a first-time user, prompts will help you set up your email account by
establishing a user name and password.
3. Enter your text or select a preset message or icon and press left softkey.
SEND
4. To send the message, press
(left softkey).
OK
3. To view your messages, select Inbox, and press
(left softkey).
To add and/or edit Pre-Set Messages:
1. Go to the Web from your phone.
4. Scroll to select the message you wish to read and press left softkey.
5. Once you’ve read a message, use the quick actions at the end of each
message (Erase, Reply, ReplyAll or NextMessage) or select Menu
for a full list of options.
2. From the home page, select the Messaging folder and press left softkey.
3. Select ShortMail and press left softkey.
4. Highlight the Menu softkey and press left softkey.
ComposingPCSEmailMessages
5. From the Options menu highlight Pre-SetMsgs and press left softkey.
To compose a PCS Email Message:
6. From the Edit Pre-Set MS menu, select (AddNew) or the message you
wish to edit and press left softkey.
1. From the home page, select the Messaging folder, and
OK
press
(left softkey).
7. Enter your new message or changes and press left softkey.
2. From the Messaging folder, select Email and press left softkey
3. Select Compose and press left softkey
4. Select AddName to enter the address of the person to whom you’re
sending a message and press left softkey
.
.
Note: You may also add or edit Pre-Set Messages in the “Manage My
.
5. Select Next to enter the subject of your email and your specific message.
6. Select Send and press left softkey when your message is ready to be
delivered.
Section 3: Using PCS Service Features
156 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 157
Chat
Ringers
PCS VisionSM gives you the ability to join wireless chatrooms from your
PCS Phone. Send messages including text and icons to many chatroom
participants or launch one-on-one (private) chatrooms.
Downloading Ringers
To download an available ringer to your phone:
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Ringers and press
4. Highlight GetNew and press
to display the main menu.
To access a chatroom from the browser:
.
1. Launch the browser.
.
2. Select the Messaging folder.
. The browser will launch.
3. Select Chat and select the chatroom you’d like to enter.
4. Use your keypad to enter a temporary screen name.
5. Scroll through postings to read messages posted by other users.
5. Select an item to download, and press
downloaded to your phone. (For more information on navigating the
Web, see “Browsing the Web” on pages 142-144.)
. The selected ringer will be
Note: To avoid inadvertent data usage charges, you should log out of
chatrooms when you are ready to exit.
6. Press right softkey to return to the Downloads menu or
to return
to the Standby mode.
Note: You may store total of 640KB downloaded data on your phone.
Additional downloads will be stored in your personal vault.
Assigning Downloaded Ringers
Downloaded ringers may be assigned directly from the Downloads menu
and are also available through the Settings menu.
To assign a downloaded ringer through the Settings menu, see “Selecting
Ringer Types for Voice Calls” on page 33, “Selecting Ringer Types for
Voicemail” on page 34, “Selecting Ringer Types for Messages” on page 34,
“Setting a Start-up/Power-off Tone” on page 35 or “Selecting a
Ringer/Image Type for an Entry” on page 85.
Section 3: Using PCS Service Features
158 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 159
To assign a downloaded ringer from the Downloads menu:
ScreenSavers
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight Ringers and press
to display the main menu.
Downloading Screen Savers (Images)
.
To download an available screen saver (Images) to your phone:
.
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight ScreenSavers and press
4. Highlight GetNew and press
to display the main menu.
4. Highlight the downloaded data you want to confirm and press
5. Select Assign from the options and press
6. Highlight one of Voice Calls, Voicemail, Messaging, Start-upTone,
.
.
.
.
. The browser will launch.
Power-offTone or Phone Book, and press
.
5. Select an item to download, and press
. The selected screen saver
The following two items need extra step.
will be downloaded to your phone. (For more information on navigating
the Web, see “Browsing the Web” on pages 142-144.)
ᮣ
Voice Calls highlight WithCallerID or NocallerID, and press
.
ᮣ
Phone Book highight your desired entry and press
.
6. Press right softkey to return to the Downloads menu or
to the Standby mode.
to return
7. Then the message appears to confirm the data has been assigned.
Purchasing Ringers
Note: You may store total of 640KB downloaded data on your phone.
Additional downloads will be stored in your personal vault.
You can purchase ringers on your phone or through
Assigning Downloaded Screen Savers (Images)
To purchase a ringer from your phone:
Downloaded screen savers (Images) may be assigned directly from the
Downloads menu and are also available through the Settings menu.
1. Highlight an item in the Ringers menu and press
to select it.
2. If you have purchased a ringer before, proceed to Step 3. If you have not
previously purchased a ringer, you will be prompted to enter your
account password and create your purchasing profile.
To assign a downloaded screen saver through the Settings menu,
see “Changing the Display Screen” on page 39, “Setting the Display for
Incoming Calls” on page 40, “Screen Savers” on page 41 or “Selecting a
Ringer/Image Type for an Entry” on page 85.
3. After purchasing the ringer, highlight DownloadNow to download the
item immediately or Save forLaterto save it in your personal vault.
Section 3: Using PCS Service Features
160 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 161
To assign a downloaded screen saver from the Downloads menu:
Games
1. From the Standby mode, press
2. Highlight Downloads and press
3. Highlight ScreenSavers and press
to display the main menu.
.
You can play a variety of entertaining and graphically-rich games on your
PCS Phone. New games are easy to download and play.
Accessing Games
.
4. Highlight the downloaded data you want to confirm and press
5. Select Assign from the options and press
6. Highlgit one of IncomingCalls, ScreenSaver, Phone Book,
.
(For details on purchasing options, consult your PCS Service Plan.)
.
To access a game from your phone:
OutgoingCalls or Service Search and press
.
1. Highlight a game in the Games menu. The game summary and
purchasing options (if applicable) are displayed.
The following item needs extra step.
ᮣ
Phone Book highlight your desired entry and press
.
2. Select the game by highlighting it and pressing
.
7. Then the message appears to confirm the data has been assigned.
3. If you have purchased a game before, or if you are accessing a game
that does not have premium service charges associated with it, proceed
to Step 4. If you have not purchased a game, you will be prompted to
enter your account password and create your purchasing profile.
Purchasing Screen Savers
You can purchase screen savers on your phone or through
To purchase a screen saver from your phone:
4. After accessing the game, highlight DownloadNow to play the game
immediately or Save forLaterto save the game for later use.
Playing Games
1. Highlight an item in the ScreenSavers menu and press
select it.
to
2. If you have purchased a screen saver before, proceed to Step 3. If you
To play a game on your PCS Phone:
have not purchased a screen saver, you will be prompted to enter your
account password and create your purchasing profile.
1. Launch your browser.
2. From the home page, select Games and press
.
3. After purchasing the screen saver, highlight DownloadNow to
download the item immediately or Save forLaterto save it in your
personal vault.
3. Select the game you wish to play and press
.
4. Follow the game instructions on your display screen.
Note: Your personal vault saves items for up to 90 days. Once an item
has been downloaded to your phone, you may keep the file for as long as
you like.
Section 3: Using PCS Service Features
162 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 163
PCSBusiness ConnectionSM
PersonalEdition
PCSVisionFAQs
How will I know when my phone is ready for PCS Vision Service?
PCS Business ConnectionSM Personal Edition is designed to offer secure
wireless access to both Microsoft Outlook and Lotus Notes.
Your user name (for example, [email protected]) will display
on your phone’s display screen.
PCS Business Connection Personal Edition delivers the
following features:
How do I sign-in for the first time?
You are automatically signed in to PCS Vision Services when you access
web first time.
ᮣ
Business emailaccess: Read, reply to, forward, delete and compose
your company email.
How do I know when my phone is connected to PCS Vision Services?
ᮣ
Companydirectoryandcontacts: Search, view, call, and email
Your phone automatically connects when PCS Vision Service is used or an
incoming message arrives. Your phone will also display the
(Connecting takes about 10-12 seconds.)
contacts from your company’s directory. Do all this and add/edit
your personal contacts.
icon.
ᮣ
Workcalendar: Accept and reject meetings, view daily summaries
Can I make calls and use PCS Vision Services at the same time?
and details, navigate to various dates.
You cannot use voice and data services simultaneously. If you receive a
call while the data service is active, the call will be forwarded into
voicemail.
ᮣ
Files/informationonyourPC: Browse folders, download and
view documents from any device using a PC browser or Pocket
Internet Explorer.
When is my data connection active?
To use PCS Business Connection Personal Edition, install Business
Connection Personal Edition software on your work PC. This allows data
to be securely retrieved in real-time by your wireless device when
connected to the Sprint Nationwide PCS Network. There is a monthly
charge for PCS Business Connection, and usage charges will also apply.
Your connection is active when data is being transferred. Incoming calls
go directly to voicemail. When active, the (Sending) or (Receiving)
indicator flashes on your phone’s display screen.
When is my data connection dormant?
When your work PC isn’t on, you can share connections with your
co-workers so that you always have access to your email, calendar and
contacts. Your data remains secure behind the corporate firewall and any
changes you make on your wireless device are instantly updated on your
corporate server without the need to synchronize.
If no data is received for 10 seconds, the connection goes dormant. When
the connection is dormant, voice calls are allowed. (The connection can
go active again quickly.) If no data is received for a long time, the
connection will terminate.
Can I sign out of data services?
Additional Business Connection solutions are available to your company.
You can sign out without turning off your phone, however you will not be
able to browse the Web or use other PCS Vision Services. While signed out,
you can still place or receive phone calls, check voicemail, and use other
voice services. You may sign in again at any time. To sign out, go to
Internet in your phone’s Settings menu.
Section 3: Using PCS Service Features
164 3B: PCS Vision
Section 3: Using PCS Service Features
3B: PCS Vision 165
Section 3C
SM
PCS Voice Command
In This Section
PCSVoice CommandSM
ᮣ
ith Sprint, the first wireless provider to offer innovative PCS Voice
WCommand technology, reaching your friends, family, co-workers and
teammates has never been easier – especially when you’re on the go. You can
even listen to Web-based information such as news, stock quotes, weather,
sports and much more. Your voice does it all with PCS Voice Command.
Section 3: Using PCS Service Features
166
3C: PCS Voice Command 167
ᮣ
CallDirectoryAssistance:If you don’t have a computer or Internet
access handy, you can have PCS Directory Assistance look up phone
numbers for you and automatically add them to your address book.
Just say, “Call operator,” and we’ll add two names and numbers to your
address book for our standard directory assistance charge.
GettingStartedWithPCSVoice Command
With PCS Voice Command:
ᮣ
You can store all your contact’s phone numbers, so you can simply say
the name of the person you want to call.
ᮣ
There’s no need to punch in a lot of numbers, memorize voicemail
Makinga CallWithPCSVoice Command
passwords or try to dial while you’re driving.
1. Once you’ve signed up for PCS Voice Command and created your
ᮣ
You can call anyone in your address book – even if you don’t remember
their phone number.
address book, all you do is press
followed by the prompt “Ready.”
. You’ll hear a tone
It’s EasytoGetStarted
2. After the “Ready” prompt, simply say, in a natural voice, “Call” and
the name of the person or the number you’d like to call. For example,
you can say, “Call Jane Smith at work,” “Call John Baker on the mobile
phone,” “Call 555-1234” or “Call Bob Miller.”
Just dial
from your PCS Phone to activate the service and
listen to brief instructions directly from your phone. There is a monthly
charge for PCS Voice Command.
CreatingYourOwnAddress Book
3. Your request will be repeated and you will be asked to verify. Say “Yes” to
call the number or person. Say “No” if you wish to cancel.
You can program up to 500 names into your personal address book, with
each name having up to five phone numbers. That’s 2,500 phone
numbers – and with the advanced technology of PCS Voice Command –
you can have instant access to all of them.
4. The number will automatically be dialed. Keep in mind that PCS Voice
Command recognizes not only your voice, but any voice, so that others
can experience the same convenience if they use your phone.
There are four ways to update your address book:
For more helpful hints on PCS Voice Command, including a list of recognized
ᮣ
Use Voice Recordings: Simply dial
and say, “Add name.”
You will then be asked to say the name and number you want to add to
your personal address book. Your address book can store up to 20 voice
recorded names at once.
AccessingInformationUsing
PCSVoice Command
ᮣ
ᮣ
functional Web-based address book to create and update your contacts.
1. Press
.
2. Say “Call the Web.” (To access, listen to and respond to email, once
email has been set up, say “Call My Email.”)
Use anExistingAddress Book: Automatically merge address books
from desktop software applications with Sprint SyncSM Services for no
additional charge. Simply click on the “Click to synchronize” button
within your PCS Voice Command personal address book at
3. Choose from a listing of information categories like news, weather,
sports and more.
Note: PCS Voice Command is not available while roaming off the
enhanced Sprint Nationwide PCS Network.
Section 3: Using PCS Service Features
168 3C: PCS Voice Command
Section 3: Using PCS Service Features
3C: PCS Voice Command 169
Section 4
Safety Guidelines and
Warranty Information
Section 4
Safety Guidelines and Warranty Information 171
170
Section 4A
Safety
In This Section
ᮣ
Gettingthe MostOutofYourReception
ᮣ
ᮣ
Maintaining Safe Use of and Access to Your Phone
Caring for the Battery
ᮣ
ᮣ
Acknowledging Special Precautions and the FCC Notice
ConsumerInformationonWireless Phones
art of getting the most out of your PCS Phone is knowing where and
Phow it works at optimum efficiency. This section outlines performance
and safety guidelines that ensure you experience the full quality that your
PCS Phone was designed to give you.
Section 4: Safety Guidelines and Warranty Information
172
4A: Safety 173
Maintaining Your Phone’s Peak Performance
Gettingthe MostOutofYourReception
Keeping Tabs on Signal Strength
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
The quality of each call you make or receive depends on the signal
strength in your area. Your phone informs you of the current signal
strength by displaying a number of bars next to the signal strength icon.
The more bars displayed, the stronger the signal. If you’re inside a
building, being near a window may give you better reception.
ᮣ
Hold the phone with the antenna raised, fully-extended and over
your shoulder.
ᮣ
Try not to hold, bend or twist the phone’s antenna.
ᮣ
Don’t use the phone if the antenna is damaged.
ᮣ
Speak directly into the mouthpiece.
Understanding the Power Save Feature
ᮣ
Avoid exposing your phone and accessories to rain or liquid spills.
If your phone is unable to find a signal after 15 minutes of searching, a
Power Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it yourself by
pressing any key. Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your phone returns to
Standby mode.
If your phone does get wet, immediately turn the power off and
remove the battery. If it’s inoperable, return it to a SprintStore or
call PCS Customer Service Solutions for service.
Note: For the best care of your phone, only Sprint authorized personnel
should service your phone and accessories. Faulty service may void
the warranty.
Understanding How Your Phone Operates
MaintainingSafe Use ofandAccess to
YourPhone
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO
SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
Your phone is basically a radio transmitter and receiver. When it’s turned
on, it receives and transmits radiofrequency (RF) signals. When you use
your phone, the system handling your call controls the power level. This
power can range from 0.01 µ watts to 0.2 watts in digital mode.
Knowing Radiofrequency Safety
Using Your Phone While Driving
The design of your PCS Phone complies with updated NCRP standards
described below.
Talking on your phone while driving (or operating the phone without a
hands-free device) is prohibited in some jurisdictions. Laws vary as to
specific restrictions. Remember that safety always comes first.
In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)
and the American National Standards Institute (ANSI) joined in updating
ANSI’s 1982 standard for safety levels with respect to human exposure to
RF signals. More than 120 scientists, engineers and physicians from
universities, government health agencies and industries developed this
updated standard after reviewing the available body of research. In 1993,
the Federal Communications Commission (FCC) adopted this updated
standard in a regulation. In August 1996, the FCC adopted hybrid
standard consisting of the existing ANSI/IEEE standard and the
guidelines published by the National Council of Radiation Protection and
Measurements (NCRP).
When using your phone in the car:
ᮣ
Get to know your phone and its features, such as speed dial
and redial.
ᮣ
When available, use a hands-free device.
ᮣ
Position your phone within easy reach.
ᮣ
Let the person you are speaking to know you are driving; if
necessary, suspend the call in heavy traffic or hazardous
weather conditions.
ᮣ
Do not take notes or look up phone numbers while driving.
Section 4: Safety Guidelines and Warranty Information
174 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4A: Safety 175
ᮣ
ᮣ
ᮣ
Dial sensibly and assess the traffic; if possible, place calls when
stationary or before pulling into traffic.
Administration (FAA) regulations require you to have permission from a
crew member to use your phone while the plane is on the ground. To
prevent any risk of interference, FCC regulations prohibit using your
phone while the plane is in the air.
Do not engage in stressful or emotional conversations that may
divert your attention from the road.
Turning Off Your Phone in Dangerous Areas
Dial
to report serious emergencies. It’s free
from your wireless phone.
To avoid interfering with blasting operations, turn off your phone when in
a blasting area or in other areas with signs indicating that two-way radios
should be turned off. Construction crews often use remote-control RF
devices to set off explosives.
ᮣ
ᮣ
Use your phone to help others in emergencies.
Call roadside assistance or a special non-emergency wireless number
when necessary.
Turn off your phone when you’re in any area that has a potentially
explosive atmosphere. Although it’s rare, your phone or its accessories
could generate sparks. Sparks could cause an explosion or a fire resulting
in bodily injury or even death. These areas are often, but not always,
clearly marked. They include:
Tip: Purchase an optional Hands-Free Car Kit.
Following Safety Guidelines
To operate your phone safely and efficiently, always follow any special
regulations in a given area. Turn your phone off in areas where use is
forbidden or when it may cause interference or danger.
ᮣ
Fueling areas such as gas stations.
ᮣ
Below deck on boats.
Using Your Phone Near Other Electronic Devices
ᮣ
Fuel or chemical transfer or storage facilities.
Most modern electronic equipment is shielded from radiofrequency (RF)
signals. However, RF signals from wireless phones may affect
inadequately shielded electronic equipment.
ᮣ
Areas where the air contains chemicals or particles such as grain,
dust or metal powders.
ᮣ
Any other area where you would normally be advised to turn off your
RF signals may affect improperly installed or inadequately shielded
electronic operating systems and/or entertainment systems in motor
vehicles. Check with the manufacturer or their representative to
determine if these systems are adequately shielded from external RF
signals. Also check with the manufacturer regarding any equipment that
has been added to your vehicle.
vehicle’s engine.
Note: Never transport or store flammable gas, liquid or explosives in the
compartment of your vehicle that contains your phone or accessories.
Restricting Children’s Access to your Phone
Your PCS Phone is not a toy. Children should not be allowed to play with it
because they could hurt themselves and others, damage the phone or
make calls that increase your phone bill.
Consult the manufacturer of any personal medical devices, such as
pacemakers and hearing aids, to determine if they are adequately shielded
from external RF signals.
Note: Always turn off the phone in health care facilities and request
permission before using the phone near medical equipment.
Turning Off Your Phone Before Flying
Turn off your phone before boarding any aircraft. To prevent possible
interference with aircraft systems, the U.S. Federal Aviation
Section 4: Safety Guidelines and Warranty Information
176 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4A: Safety 177
Caringforthe Battery
AcknowledgingSpecialPrecautions andthe
FCC Notice
Protecting Your Battery
The guidelines listed below help you get the most out of your
battery’s performance.
FCC Notice
The phone may cause TV or radio interference if used in close proximity to
receiving equipment. The FCC can require you to stop using the phone if
such interference cannot be eliminated.
ᮣ
Use only Sprint-approved batteries and desktop chargers. These
chargers are designed to maximize battery life. Using other batteries
or chargers voids your warranty and may cause damage.
Vehicles using liquefied petroleum gas (such as propane or butane) must
comply with the National Fire Protection Standard (NFPA-58). For a copy
of this standard, contact the National Fire Protection Association,
One Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
ᮣ
In order to avoid damage, charge the battery only in temperatures
that range from 32º F to 113º F (0º C to 45º C).
ᮣ
Don’t use the battery charger in direct sunlight or in high humidity
areas, such as the bathroom.
ᮣ
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
Never dispose of the battery by incineration.
ᮣ
Keep the metal contacts on top of the battery clean.
ᮣ
Don’t attempt to disassemble or short-circuit the battery.
ᮣ
The battery may need recharging if it has not been used for a long
period of time.
This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
ᮣ
It’s best to replace the battery when it no longer provides acceptable
performance. It can be recharged hundreds of times before it
needs replacing.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
ᮣ
Don’t store the battery in high temperature areas for long periods of
time. It’s best to follow these storage rules:
Less than one month:
4º F to 140º F (-20º C to 60º C)
More than one month:
4º F to 113º F (-20º C to 45º C)
ᮣ
Reorient or relocate the receiving antenna.
ᮣ
Increase the separation between the equipment and receiver.
ᮣ
Disposal of Lithium Ion (LiIon) Batteries
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
For safe disposal options of your LiIon batteries, contact your nearest
Sprint-authorized service center.
ᮣ
Consult the dealer or an experienced radio/TV technician for help.
SpecialNote:Be sure to dispose of your battery properly. In some areas,
the disposal of batteries in household or business trash may be prohibited.
Note: For safety, do not handle a damaged or leaking LiIon battery.
Section 4: Safety Guidelines and Warranty Information
178 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4A: Safety 179
Cautions
Specific Absorption Rates (SAR) for Wireless Phones
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your
authority to operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized accessories may be
dangerous and void the phone warranty if said accessories cause damage
or a defect to the phone.
The SAR is a value that corresponds to the relative amount of RF energy
absorbed in the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing, measuring
and calculation process. It does not represent how much RF the phone
emits. All phone models are tested at their highest value in strict
laboratory settings. But when in operation, the SAR of a phone can be
substantially less than the level reported to the FCC. This is because of a
variety of factors including its proximity to a base station antenna, phone
design and other factors. What is important to remember is that each
phone meets strict federal guidelines. Variations in SARs do not represent
a variation in safety.
Although your phone is quite sturdy, it is a complex piece of equipment
and can be broken. Avoid dropping, hitting, bending or sitting on it.
Body-Worn Operation
To maintain compliance with FCC RF exposure requirements, Body-worn
operations are restricted to belt-clips, holsters or similar accessories that
have no metallic component in the assembly and that provide at least 1.8
cm separation between the device, including its antenna whether
extended or retracted, and the user’s body. Use of non-Sprint approved
accessories may violate FCC RF exposure requirements.
All phones must meet the federal standard, which incorporates a
substantial margin of safety. As stated above, variations in SAR values
between different model phones do not mean variations in safety. SAR
values at or below the federal standard of 1.6 W/kg are considered safe for
use by the public.
For more information about RF exposure, please visit the FCC website at
The highest reported SAR values of the SCP-6400 are:
AMPS mode (Part 22) - Head: 0.93W/kg; Body-worn: 1.21W/kg
PCS mode (Part 24) - Head: 1.47W/kg; Body-worn: 1.27W/kg
FCC Radiofrequency Emission
This phone meets the FCC Radiofrequency Emission Guidelines. FCC ID
number: AEZSCP-62H. More information on the phone’s SAR can be
Section 4: Safety Guidelines and Warranty Information
180 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4A: Safety 181
Section 4B
Owner’s Record
The model number, regulatory number and serial number are located on
a nameplate inside the battery compartment. Record the serial number in
the space provided below. This will be helpful if you need to contact us
about your phone in the future.
Manufacturer’s Warranty
Model: PCS Phone SCP-6400
Serial No.:
In This Section
Manufacturer’s Warranty
UserGuide ProprietaryNotice
CDMA Technology is licensed by QUALCOMM Incorporated under one or
more of the following patents:
his section contains the manufacturer’s warranty for your PCS Phone.
4,901,307 5,109,390 5,267,262 5,416,797
5,506,865 5,544,196 5,657,420 5,101,501
5,267,261 5,414,796 5,504,773 5,535,239
5,600,754 5,778,338 5,228,054 5,337,338
5,710,784 5,056,109 5,568,483 5,659,569
5,490,165 5,511,073
T
For information about the Terms and Conditions of your PCS Service, please
see the Start Here guide included with your phone. For the most recent version
T9 Text Input is licensed by Tegic Communications and is covered by
U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other
patents pending.
Section 4: Safety Guidelines and Warranty Information
182 4A: Safety
Section 4: Safety Guidelines and Warranty Information
4B: Manufacturer’s Warranty 183
This warranty does not cover customer education, instruction, installation,
set up adjustments, or signal reception problems.
This warranty is valid only in the United States.
Manufacturer’s Warranty
Customer Limited Warranty
SPRINT SPECTRUM, L.P., (Sprint) offers you a limited warranty that the
enclosed subscriber unit (Product), including accessories in the product
package, will be free from defects in material or workmanship as follows:
SUBSCRIBER UNIT:
USE WITH ACCESSORIES NOT SUPPLIED BY SPRINT OR OTHERWISE
NOT EXPRESSLY AUTHORIZED BY SPRINT MAY BE DANGEROUS.
SPRINT SPECIFICALLY DISCLAIMS LIABILITY, AND SHALL HAVE NO
OBLIGATION TO PROVIDE TO BUYER ANY OTHER REMEDY, FOR ANY
AND ALL DIRECT, INDIRECT, SPECIAL, GENERAL, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LOSS
OF PROFITS, LOST SALES, LOSS OF USE OF THE PRODUCT, OR
ANTICIPATED PROFITS ARISING OUT OF USE OF OR INABILITY TO USE
ANY PRODUCT (FOR EXAMPLE, WASTED AIRTIME CHARGES DUE TO
THE MALFUNCTION OF A PRODUCT), DAMAGE DUE TO IMPROPER
OPERATION OR MAINTENANCE, INSTALLATION, CONNECTION TO
IMPROPER VOLTAGE SUPPLY. OR ATTEMPTED REPAIR OF THE
PRODUCT BY ANYONE OTHER THAN A FACILITY AUTHORIZED BY
SPRINT. THIS WARRANTY DOES NOT COVER PRODUCTS SOLD AS IS OR
WITH ALL FAULTS, OR CONSUMABLES, (SUCH AS FUSES). THIS
WARRANTY DOES NOT APPLY WHEN THE MALFUNCTION RESULTS FROM
USE OF THE PRODUCT IN CONJUNCTION WITH ACCESSORIES,
PRODUCTS OR ANCILLARY OR PERIPHERAL EQUIPMENT NOT
SUPPLIED BY OR EXPRESSLY AUTHORIZED FOR USE BY SPRINT, AND
WHERE IT IS DETERMINED BY SPRINT THAT THERE IS NO FAULT WITH
THE PRODUCT ITSELF.
A. SPRINT ONE (1) YEAR LIMITED WARRANTY: For a period of one (1) year
from the date of purchase, Sprint will, at its option, either pay the parts and
labor charges to any authorized PCS® Phone service facility to repair or
replace a defective product (with new or rebuilt parts/replacements). After
this one (1) year period, you must pay all parts, shipping and labor charges.
B. REPAIRS: For a period equal to the remainder of the original limited
warranty period on an original Product or for the 180 days after the date of
repair/replacement, whichever is longer, Sprint will repair or replace (with
new or rebuilt replacement) defective parts or Product used in the repair or
replacement of the original Product under this Limited Warranty.
Proof of purchase in the from of a bill of sale or receipted invoice warranty
repair document which is evidence that the Product is within the warranty
period must be presented to obtain warranty service. This limited warranty
is not transferable to any third party, including but not limited to any
subsequent purchaser or owner of the Products.
Transfer or resale of a Product will automatically terminate warranty
coverage with respect to the Products.
This limited warranty dose not cover and is void with respect to the
following: (i) Products which have been improperly installed, repaired,
maintained or modified (including the antenna); (ii) Products which have
been subjected to misuse (including Products used in conjunction with
hardware electrically or mechanically incompatible or used with
accessories not supplied by Sprint), abuse accident, physical damage,
abnormal operation, improper handling and storage, neglect, exposure to
fire, water or excessive moisture or dampness or extreme changes in climate
or temperature, (iii) Products operated outside published maximum
ratings; (iv) cosmetic damage; (v) Products on which warranty stickers or
Product serial numbers have been removed, altered, or rendered illegible;
(vi) customer instruction; (vii) cost of installation, removal or
reinstallation; (viii) signal reception problems (unless caused by defect in
material and workmanship); (ix) damage the result of fire, flood, acts of
God or other acts which are not the fault of Sprint and which the Product is
not specified to tolerate, including damage caused by mishandling and
blown fuses; (x) consumables (such as fuses); or (xi) any Products which
have been opened, repaired, modified or altered by anyone other than Sprint
or a Sprint authorized service center.
REPAIR OR REPLACEMENT, AS PROVIDED UNDER THE WARRANTY, IS
YOUR SOLE AND EXCLUSIVE REMEDY FOR BREACH OF THE LIMITED
WARRANTY. TO THE EXTENT PERMITTED BY APPLICABLE LAW,
SPRINT MAKES NO OTHER WARRANTIES OF ANY KIND, EXPRESS OR
IMPLIED, WITH RESPECT TO THE PRODUCTS FOR A PARTICULAR
PURPOSE OR AGAINST INFRINGEMENT WITHIN THE TIME PERIOD
SPECIFIED IN THE LIMITED WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS LIMITED
IN DURATION TO THE DURATION OF THIS WARRANTY.
Some States do not allow the exclusion or limitation of incidental or
consequential damages, or allow limitations on how long an implied
warranty last, so the above limitations or exclusions may not apply to you.
This limited warranty gives you specific legal rights, and you may have
other rights which vary from State to State.
For other Warranty Service Information, please call PCS CUSTOMER
SERVICE SOLUTIONS at 1- 888- 211- 4727.
Section 4: Safety Guidelines and Warranty Information
184 4B: Manufacturer’s Warranty
Section 4: Safety Guidelines and Warranty Information
4B: Manufacturer’s Warranty 185
L
Locking Your Phone 50
Index
M
A
Making Calls 21
Manufacturer’s Warranty 184-185
Menus
Diagram 67-68
Navigation 66
Structure 66
Missed Call Notification 23
Answering Calls 22
B
Battery
Capacity 18-19
Charging 20
Disposal 178
Installing 19
Removing 19
P
PCS Services
C
Call Forwarding 138
Call Waiting 136-137
Caller ID 136
Customer Service Solutions 8,
10, 50, 86
Directory Assistance 10
Operator Services 10
PCS Vision
Browsing the Web 142-144
FAQs 165
Call Guard 62-63
Call History
Erasing 73
Making a Call From 71
Options 70
Saving a Phone Number From
71-72
Viewing 70
D
Games 163
Dialing Options 24
Messaging 146-154
Password 56
Ringers 159-160
Screen Savers 161-162
Security Features 49-57
Signing In and Out 57
User Name 140
Web Connection 145
PCS Voice Command 167-169
Phone Number
Display Screen Symbols 16
E
Entering Text
Alphabet Mode 78
Selecting a Character Input
Mode 76-77
Symbols and Numbers 79
T9 Text Input 77
Copyright(c) 2002 ACCESS Systems America Inc. ACCESS, NetFront are registered trademarks or
trademarks owned by ACCESS Co., Ltd. in Japan and selected countries worldwide. NetFront is a
registered trademark of NetFront Communications, Inc. in the United States and is used under a
license. Portions of this software are based in part on the work of the Independent JPEG Group.
F
Displaying 21, 89
FCC Notice 179-181
R
I
Powered by JBlend®, ©1997-2002 Aplix Corporation. All rights reserved. Java and all Java-based
trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the U.S.
and other countries. JBlend and all JBlend-based trademarks and logos are trademarks or registered
trademarks of Aplix Corporation in Japan and other countries.
Ringer Types 33
Roaming 60-61
Internal Phone Book
Adding an Entry 80-81
Editing Entries 83, 84
Finding Entries 81-83
Options 76
Copyright © 2002 Sprint Spectrum L.P. All rights reserved. No reproduction in whole or in part without
prior written approval. Sprint, PCS Business Connection and the diamond logo are trademarks of
Sprint Communications Company L.P. All other trademarks are property of their respective owners.
Secret Entries 86
186
Index 187
S
Screen Savers 161-162
Security Menu 50
Silent Mode 37
Smile Pictures 80
Special Numbers 53
T
T9 Text Input 77
U
Unlocking Your Phone 8, 51
V
Voicemail
Clearing 136
Notification 132
Options 134-135
Retrieving 133
Setting Up 9, 132
188 Index
|