Sanyo QWEST SCP 8300 User Manual

Qwest Phone Guide

●

SettingUpService

●

PhoneBasics

●

Qwest Service

Features

●

SafetyandWarranty

SCP-8300 by Sanyo

Table of Contents

Welcome to Qwest . . . . . . . . . . . . . . . . . . . . . . . . . .i

Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .ii

Section 1:Getting Started . . . . . . . . . . . . . . . . . . . .1

1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . .3

Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Setting Up Y o ur Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . .5

Account Passwords . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

Getting Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Section 2:Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . .9

2A. Y o ur Phone :T he Basics . . . . . . . . . . . . . . . . . . . . . .1 1

Front View of Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . .12

Key Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13

Viewing the Display Screen . . . . . . . . . . . . . . . . . . . . . . . . .15

Features of Y o ur Wireless Phone . . . . . . . . . . . . . . . . . . . . .17

Turning Y o ur Phone On and Off . . . . . . . . . . . . . . . . . . . . .19

Using Y o ur Phone’s Battery and Charger . . . . . . . . . . . . . . .20

Displaying Y o ur Phone Number . . . . . . . . . . . . . . . . . . . . .22

Changing the Faceplate . . . . . . . . . . . . . . . . . . . . . . . . . . . .23

Making and Answering Calls . . . . . . . . . . . . . . . . . . . . . . . .24

Making Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24

Dialing Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Answering Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Using the Speakerphone . . . . . . . . . . . . . . . . . . . . . . . . .29

Changing the Ringer Volume . . . . . . . . . . . . . . . . . . . . . .30

Adjusting Volume During a Conversation . . . . . . . . . . . .30

Muting a Call . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

Missed Call Notification . . . . . . . . . . . . . . . . . . . . . . . . . .31

Calling Emergency Numbers . . . . . . . . . . . . . . . . . . . . . .32

In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .33

End-of-Call Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

Saving a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . . .35

Finding a Phone Number . . . . . . . . . . . . . . . . . . . . . . . . .36

Dialing and Saving Phone Numbers With Pauses . . . . . . .36

Plus (+) Code Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . .37

Dialing From the Contacts Directory . . . . . . . . . . . . . . . .38

Using Speed Dialing . . . . . . . . . . . . . . . . . . . . . . . . . . . . .39

Using Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . . .40

Entering Text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .41

Selecting a Character Input Mode . . . . . . . . . . . . . . . . . .41

Entering Characters Using T9 Text Input . . . . . . . . . . . . .42

Entering Characters by Tapping the Keypad . . . . . . . . . .45

2B. Controllin g Y o ur Phone’s Settings . . . . . . . . . . . . .47

Sound Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Ringer Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

Selecting a Tone Length . . . . . . . . . . . . . . . . . . . . . . . . . .50

Setting a Start-up/Power-off Tone . . . . . . . . . . . . . . . . . .51

Using Voice Prompt . . . . . . . . . . . . . . . . . . . . . . . . . . . . .51

Setting Up Key Press Echo . . . . . . . . . . . . . . . . . . . . . . . .52

Adjusting the Phone’s Volume Settings . . . . . . . . . . . . . .53

Alert Notification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54

Silence All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56

Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57

Changing the Text Greeting . . . . . . . . . . . . . . . . . . . . . . .57

Changing the Backlight Time Length . . . . . . . . . . . . . . . .58

Changing the Display Screen Animation . . . . . . . . . . . . .59

Changing the Display for Incoming Calls . . . . . . . . . . . . .59

Changing the Display for Area Name . . . . . . . . . . . . . . . .60

Changing the Display for Standby Mode . . . . . . . . . . . . .61

Changing the Screen Saver . . . . . . . . . . . . . . . . . . . . . . .62

Changing the Phone’s Menu Style . . . . . . . . . . . . . . . . . .62

Changing the Display for My Buddy . . . . . . . . . . . . . . . . .63

Changing the Background . . . . . . . . . . . . . . . . . . . . . . . .63

Changing the Font Size . . . . . . . . . . . . . . . . . . . . . . . . . .64

Setting Return to Standby Mode . . . . . . . . . . . . . . . . . . .65

Sleep Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65

Location Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .66

Messaging Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .67

Setting a Callback Number . . . . . . . . . . . . . . . . . . . . . . . .70

Airplane Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .71

TTY Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .72

Phone Setup Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Shortcut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .74

Auto Answer Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Display Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .75

Setting the Open/Close Flip Option . . . . . . . . . . . . . . . .76

Setting Any Key Answer . . . . . . . . . . . . . . . . . . . . . . . . . .77

Setting the Side Key Guard . . . . . . . . . . . . . . . . . . . . . . . .77

Setting the Text Entry Options . . . . . . . . . . . . . . . . . . . . .78

Setting Abbreviated Dialing . . . . . . . . . . . . . . . . . . . . . . .78

Headset Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79

2C. Settin g Y o ur Phone’s Security . . . . . . . . . . . . . . . .81

Accessing the Security Menu . . . . . . . . . . . . . . . . . . . . . . .82

Using Y o ur Phone’s Lock Feature . . . . . . . . . . . . . . . . . . . .82

Locking Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . .82

Unlocking Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Locking the Pictures and Videos Menu . . . . . . . . . . . . . .83

Lock Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .83

Changing the Lock Code . . . . . . . . . . . . . . . . . . . . . . . . .84

Calling in Lock Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . .84

Restricting Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .85

Using Special Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . .86

Erasing the Contacts Directory . . . . . . . . . . . . . . . . . . . . . .86

Erasing All Downloads . . . . . . . . . . . . . . . . . . . . . . . . . . . .87

Resetting Y o ur Pictures Account . . . . . . . . . . . . . . . . . . . . .87

Resetting Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . .88

Security Features for Sprint PCS Vision . . . . . . . . . . . . . . . .89

Enabling and Disabling Sprint PCS Vision Services . . . . .89

2D. Controllin g Y o ur Roaming Experience . . . . . . . . . .91

Understanding Roaming . . . . . . . . . . . . . . . . . . . . . . . . . . .92

Setting Y o ur Phone’s Roam Mode . . . . . . . . . . . . . . . . . . . .95

Controlling Roaming Charges Using Call Guard . . . . . . . . .96

2E. Navigatin g T hrough Menus . . . . . . . . . . . . . . . . . .99

Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .100

Viewing the Menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102

2F. Managing Call History . . . . . . . . . . . . . . . . . . . . . .107

Viewing History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108

Call History Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .109

Making a Call From Call History . . . . . . . . . . . . . . . . . . . . .110

Saving a Phone Number From Call History . . . . . . . . . . . .111

Prepending a Phone Number From Call History . . . . . . . .112

Erasing Call History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .113

2G. Using the Contacts Directory . . . . . . . . . . . . . . . .1 1 5

Displaying the Contacts List . . . . . . . . . . . . . . . . . . . . . . .116

Adding a New Contacts Entry . . . . . . . . . . . . . . . . . . . . . .116

Finding Contacts List Entries . . . . . . . . . . . . . . . . . . . . . . .117

Contacts List Entry Options . . . . . . . . . . . . . . . . . . . . . . .120

Adding a Phone Number to a Contacts Entry . . . . . . . . . .121

Editing a Contacts Entry . . . . . . . . . . . . . . . . . . . . . . . . . .122

Erasing a Contacts Entry From the List . . . . . . . . . . . . . . .122

Assigning Speed Dial Numbers . . . . . . . . . . . . . . . . . . . . .123

Assigning an Image to a Contacts Entry . . . . . . . . . . . . . . .124

Selecting a Ringer for an Entry . . . . . . . . . . . . . . . . . . . . . .125

Secret Contacts Entries . . . . . . . . . . . . . . . . . . . . . . . . . . .126

2H. Using the Phone’s Calendar an d T o ols . . . . . . . . .127

Using Y o ur Phone’s Calendar . . . . . . . . . . . . . . . . . . . . . .128

Displaying Y o ur Calendar . . . . . . . . . . . . . . . . . . . . . . .128

Adding an Event to the Calendar . . . . . . . . . . . . . . . . . .128

Event Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

Event Alert Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .130

Adding a Call Alarm to the Calendar . . . . . . . . . . . . . . . .131

Call Alarm Alerts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Call Alarm Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .132

Editing an Event or Call Alarm . . . . . . . . . . . . . . . . . . . .133

Viewing a Future or Past Day’s Scheduled Events . . . . . .133

Erasing an Event or Call Alarm . . . . . . . . . . . . . . . . . . . .134

Adding To Do List Items . . . . . . . . . . . . . . . . . . . . . . . . .134

Adding a To Do List Item to the Calendar . . . . . . . . . . . .135

Viewing Memory in Y o ur Calendar . . . . . . . . . . . . . . . .136

Purging All Events, Call Alarms, or To Do List Items . . . .137

Personal Information Management . . . . . . . . . . . . . . . . . .138

Displaying Y o ur User Address . . . . . . . . . . . . . . . . . . . .138

Finding Icon Definitions . . . . . . . . . . . . . . . . . . . . . . . .138

Displaying the Version Information . . . . . . . . . . . . . . . .139

Displaying Advanced Information . . . . . . . . . . . . . . . . .139

Using Y o ur Phone’s Tools . . . . . . . . . . . . . . . . . . . . . . . . .140

Using the Alarm Clock . . . . . . . . . . . . . . . . . . . . . . . . . .140

Updating Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . .141

Using the Stop Watch . . . . . . . . . . . . . . . . . . . . . . . . . . .142

Using the Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . .143

Using the World Clock . . . . . . . . . . . . . . . . . . . . . . . . . .143

2I. Usin g Y o ur Phone’s V o ice Services . . . . . . . . . . . .145

Using Voice-Activated Dialing . . . . . . . . . . . . . . . . . . . . . .146

Making a Call Using Voice-Activated Dialing . . . . . . . . .146

Programming Voice Dial Tags . . . . . . . . . . . . . . . . . . . .146

Reviewing Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . .147

Erasing All Voice Dial Tags . . . . . . . . . . . . . . . . . . . . . . .148

Managing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . .149

Recording Voice Memos . . . . . . . . . . . . . . . . . . . . . . . .149

Reviewing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . .150

Erasing Voice Memos . . . . . . . . . . . . . . . . . . . . . . . . . . .150

Setting Up Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . . . .151

Activating Screen Call . . . . . . . . . . . . . . . . . . . . . . . . . .151

Selecting an Announcement for Screen Call . . . . . . . . .152

Recording Y o ur Name for a Pre-Recorded

Announcement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .153

Recording a Customized Announcement . . . . . . . . . . .154

Reviewing an Announcement . . . . . . . . . . . . . . . . . . . .155

Erasing an Announcement . . . . . . . . . . . . . . . . . . . . . . .155

2J. Usin g Y o ur Phone’s Built-in Camera . . . . . . . . . .157

Taking Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .158

Creating Y o ur Sprint PCS Picture Mail Password . . . . . .160

Camera Mode Options . . . . . . . . . . . . . . . . . . . . . . . . . .161

Selecting Camera Settings . . . . . . . . . . . . . . . . . . . . . . .167

Viewing Y o ur Camera’s Status Area Display . . . . . . . . . .168

Storing Pictures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

In Camera Folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .170

In Camera Folder Options . . . . . . . . . . . . . . . . . . . . . . .171

Saved to Phone Folder . . . . . . . . . . . . . . . . . . . . . . . . . .174

Saved to Phone Folder Options . . . . . . . . . . . . . . . . . . .175

Recording Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .176

Video Mode Options . . . . . . . . . . . . . . . . . . . . . . . . . . .178

Selecting Camcorder Settings . . . . . . . . . . . . . . . . . . . .179

Viewing Y o ur Video’s Status Area Display . . . . . . . . . . .180

Storing Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .181

In Camcorder Folder . . . . . . . . . . . . . . . . . . . . . . . . . . .181

In Camcorder Folder Options . . . . . . . . . . . . . . . . . . . .182

Saved to Phone Folder . . . . . . . . . . . . . . . . . . . . . . . . . .184

Saved to Phone Folder Options . . . . . . . . . . . . . . . . . . .185

Sending Sprint PCS Picture Mail . . . . . . . . . . . . . . . . . . . .186

Sending Pictures From the In Camera Folder . . . . . . . . .186

Sending Pictures From Messaging . . . . . . . . . . . . . . . . .189

Sending Videos From the In Camcorder Folder . . . . . . .190

Sending Videos From Messaging . . . . . . . . . . . . . . . . . .191

Managing Sprint PCS Picture Mail . . . . . . . . . . . . . . . . . . .192

Using the Sprint PCS Picture Mail Web site . . . . . . . . . .192

Managing Online Pictures and Videos

From Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .193

Uploading Pictures and Videos . . . . . . . . . . . . . . . . . . .194

Downloading Y o ur Online Pictures and Videos . . . . . . .195

Sending Online Sprint PCS Picture Mail . . . . . . . . . . . . .196

Accessing Online Picture and Video Options

From Y o ur Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .198

2K. Using Ready Link . . . . . . . . . . . . . . . . . . . . . . . . . .201

Getting Started With Ready Link . . . . . . . . . . . . . . . . . . . .202

Setting Ready Link Mode . . . . . . . . . . . . . . . . . . . . . . . .202

Preparing Y o ur Phone for Ready Link Service . . . . . . . .203

Ready Link Call Alerts . . . . . . . . . . . . . . . . . . . . . . . . . .203

Making and Receiving a Ready Link Call . . . . . . . . . . . . . .205

Displaying the Ready Link List . . . . . . . . . . . . . . . . . . . .205

Selecting a Contacts List . . . . . . . . . . . . . . . . . . . . . . . .205

Making a Ready Link Call (One-to-One Call) . . . . . . . . . .206

Making a Ready Link Call (Group Call) . . . . . . . . . . . . . .208

Making a Ready Link Call by Entering a Number . . . . . .209

Missed Call Notification for Ready Link Calls . . . . . . . . .210

Receiving a Ready Link Call . . . . . . . . . . . . . . . . . . . . . .211

Ready Link Options . . . . . . . . . . . . . . . . . . . . . . . . . . . .212

Adding and Editing Ready Link Contacts . . . . . . . . . . . . . .213

Copying an Entry to Y o ur Personal List or

Personal Group List . . . . . . . . . . . . . . . . . . . . . . . . . . . .213

Saving a Ready Link Number . . . . . . . . . . . . . . . . . . . . .214

Finding an Entry in the Ready Link List . . . . . . . . . . . . .214

Adding a New Contact to Y o ur Personal List . . . . . . . . .215

Adding a New Group to Y o ur Personal Group List . . . . .216

Editing a Contact in Y o ur Personal List . . . . . . . . . . . . . .217

Editing a Group in Y o ur Personal Group List . . . . . . . . .218

Erasing Ready Link List Entries . . . . . . . . . . . . . . . . . . . . .220

Erasing an Entry in Y o ur Personal List or

Personal Group List . . . . . . . . . . . . . . . . . . . . . . . . . . . .220

Erasing a Ready Link List . . . . . . . . . . . . . . . . . . . . . . . .221

Updating Ready Link Lists . . . . . . . . . . . . . . . . . . . . . . . . .221

Updating the Personal List . . . . . . . . . . . . . . . . . . . . . . .221

Managing Ready Link Settings . . . . . . . . . . . . . . . . . . . . . .222

Assigning Speed Dialing for Ready Link Entries . . . . . . .222

Restarting the Ready Link Service . . . . . . . . . . . . . . . . .223

Setting Ready Link Guard . . . . . . . . . . . . . . . . . . . . . . . .223

Setting Ringer Types for Ready Link Calls . . . . . . . . . . .224

Setting an Alert Notification for Ready Link Calls . . . . . .225

Setting the Speakerphone for Ready Link Calls . . . . . . .226

Setting the Default View of the Ready Link List . . . . . . .227

Setting the Floor Display of the Ready Link Calls . . . . . .227

2L. Usin g Y o ur Phone’s Built-In Media Player . . . . . .229

Y o ur Multimedia Channel Options . . . . . . . . . . . . . . . . . .230

Accessing Y o ur Media Player’s Channel Listings . . . . . . . .231

Playing a Video or Audio Clip . . . . . . . . . . . . . . . . . . . . . .232

Multimedia FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .233

Section 3:Qwest Service Features . . . . . . . . . . .237

3A. Qwest Service Features :T he Basics . . . . . . . . . . .239

Using Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .240

Setting Up Y o ur Voicemail . . . . . . . . . . . . . . . . . . . . . . .240

Voicemail Notification . . . . . . . . . . . . . . . . . . . . . . . . . .240

New Voicemail Message Alerts . . . . . . . . . . . . . . . . . . .241

Retrieving Y o ur Voicemail Messages . . . . . . . . . . . . . . .242

Voicemail Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . .244

Clearing the Message Icon . . . . . . . . . . . . . . . . . . . . . . .247

Voicemail Menu Key . . . . . . . . . . . . . . . . . . . . . . . . . . .247

Using SMS Text Messaging . . . . . . . . . . . . . . . . . . . . . . . .249

Displaying a Text Message . . . . . . . . . . . . . . . . . . . . . . .249

Composing SMS Text Messages . . . . . . . . . . . . . . . . . . .250

Accessing SMS Text Messages . . . . . . . . . . . . . . . . . . . .251

Using Canned (Pre-set) Messages . . . . . . . . . . . . . . . . . .252

Using Caller ID . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .253

Responding to Call Waiting . . . . . . . . . . . . . . . . . . . . . . . .253

Making a Three-Way Call . . . . . . . . . . . . . . . . . . . . . . . . . .254

Using Call Forwarding . . . . . . . . . . . . . . . . . . . . . . . . . . . .255

3B. Sprint PC S V ision . . . . . . . . . . . . . . . . . . . . . . . . .257

Getting Started With Sprint PCS Vision . . . . . . . . . . . . . . .258

Y o ur User Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .258

Launching a Sprint PCS Vision Connection . . . . . . . . . .259

Net Guard . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .260

Sprint PCS Vision Connection Status and Indicators . . .261

Navigating the Web . . . . . . . . . . . . . . . . . . . . . . . . . . . .262

Accessing Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

Message Types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .264

Accessing Email Providers . . . . . . . . . . . . . . . . . . . . . . .265

Accessing Instant Messaging . . . . . . . . . . . . . . . . . . . . .266

Accessing Wireless Chatrooms . . . . . . . . . . . . . . . . . . .267

Downloading Premium Services Content . . . . . . . . . . . . .268

Exploring the W eb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .271

Using the Browser Menu . . . . . . . . . . . . . . . . . . . . . . . .271

Sprint PCS Vision FAQs . . . . . . . . . . . . . . . . . . . . . . . . . . .277

Section 4:Safety Guidelines . . . . . . . . . . . . . . . .279

4A. Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .281

Getting the Most Out of Y o ur Reception . . . . . . . . . . . . . .282

Maintaining Safe Use of and Access to Y o ur Phone . . . . . .284

Caring for the Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . .286

Acknowledging Special Precautions and the FCC Notice .287

Owner’s Record . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .289

Phone Guide Proprietary Notice . . . . . . . . . . . . . . . . . . . .289

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .291

Welcome to Qwest

This guide will familiarize you with wireless technology

and your new wireless phone through simple, easy-to-

follow instructions. It’s all right here – from setting up

your account passwords and voicemail to using the most

advanced features of your phone.

Welcome and thank you for choosing Qwest .

Introduction

This PhoneGuide introduces you to wireless service and

all the features of your new phone. It’s divided into four

sections:

ࡗ

Section1: Getting Started

ࡗ

Section2: Your Phone

ࡗ

Section 3: Qwest Service Features

ࡗ

Section 4: Safety Guidelines

Throughout this guide, you’ll find tips that highlight

special shortcuts and timely reminders to help you make

the most of your new phone and service. The Table of

Contents and Index will also help you quickly locate

specific information.

You’ll get the most out of your phone if you read each

section. However, if you’d like to get right to a specific

feature, simply locate that section in the Table of Contents

and go directly to that page. Follow the instructions in

that section, and you’ll be ready to use your phone in

no time.

Section 1

Getting Started

Section 1A

Setting Up Service

In This Section

ࡗ

GettingStarted

SettingUpYourVoicemail

AccountPasswords

GettingHelp

SettingupserviceonyourSanyoSCP-8300isquickandeasy.

This section walks you through the necessary steps to

unlock your phone, set up your voicemail, and contact

Qwest for assistance with your wireless service.

Section 1A:Setting Up Service

Getting Started

UnlockingYourPhone

Tounlockyourphone,followtheseeasysteps:

1. Press

to turn the phone on.

2. Press Unlock (left softkey).

Note: To select a softkey, press the softkey button directly below the

softkey text that appears at the bottom left and bottom right of your

phone’s display screen. Softkey actions change according to the screen

you’re viewing and will not appear if there is no corresponding action

available.

3. Enter your four-digit lock code. (For security

purposes, the code is not visible as you type.)

Tip: If you can’t recall your lock code, try using the last four digits of your

wireless phone number or try 0000. If neither of these work, call Qwest

Wireless Repair at 1-888-879-0611.

Section 1A:Setting Up Service

Setting UpYour Voicemail

All unanswered calls to your wireless phone are

automatically transferred to your voicemail, even if your

phone is in use or turned off. Therefore, you will want to set

up your voicemail and personal greeting as soon as your

phone is activated.

Tosetupyourvoicemail:

1. Press and hold

2. Follow the system prompts to:

Ⅲ

Create your passcode

Ⅲ

Record your greeting

Ⅲ

Record your name announcement

Ⅲ

Choose whether or not to activate One-Touch

Message Access (a feature that lets you access

messages simply by pressing and holding

bypassing the need for you to enter your passcode)

For more information about using your voicemail, see

“Using Voicemail” on page 240.

Section 1A:Setting Up Service

Account Passwords

As a Qwest customer, you enjoy unlimited access to your

personal account information, your voicemail account, and

your Sprint PCS Vision account. To ensure that no one else

has access to your information, you will need to create

passwords to protect your privacy.

AccountPassword

If you are the account owner, you’ll have an account

password to sign on to www.qwestwireless.com and to use

when calling Qwest Wireless Customer Service. Your

default account password is the last four digits of your

Social Security number.

VoicemailPassword

You’ll create your voicemail password (or passcode) when

you set up your voicemail. See “Setting Up Your Voicemail”

on page 240 for more information on your voicemail

password.

SprintPCSVisionPassword

If your service plan includes Sprint PCS Vision , you can set

up a Sprint PCS Vision Password. This optional password

may be used to authorize purchase of Premium Services

content and to protect personal information on multi-

phone accounts.

For more information or to change your passwords, sign on

to www.qwestwireless.com or call Qwest Wireless Repair at

1-888-879-0611.

Section 1A:Setting Up Service

Getting Help

VisitOurWebsite

You can get up-to-date information on your wireless

service and options by signing onto our Website at

www.qwestwireless.com.

When you visit us online, you can

ⅷ

Review coverage maps

ⅷ

Learn how to use voicemail

ⅷ

Access your account information

ⅷ

Check out frequently asked questions

ⅷ

And more

ReachingQwestWirelessCustomerService

You can reach Qwest online or by phone:

ⅷ

Sign on to your account at www.qwestwireless.com

ⅷ

Call us toll-free at 1-888-879-0611

DirectoryAssistance

You have access to a variety of services and information

through Directory Assistance, including residential,

business, and government listings. There is a per-call charge

and you will be billed for airtime.

TocallDirectoryAssistance:

GHI

ᮣ

Press

Section 1A:Setting Up Service

OperatorServices

Operator Services provides assistance when placing collect

calls or when placing calls billed to a local telephone calling

card or third party.

ToaccessOperatorServices:

ᮣ

Press

For more information or to see the latest in products and

services, visit us online at www.qwestwireless.com.

Section 1A:Setting Up Service

Section 2

Your Phone

Section 2A

Your Phone: The Basics

In This Section

ࡗ

FrontViewofYourPhone

ViewingtheDisplayScreen

FeaturesofYourWirelessPhone

TurningYour PhoneOnandOff

UsingYourPhone’sBatteryandCharger

DisplayingYourPhoneNumber

ChangingtheFaceplate

MakingandAnsweringCalls

EnteringText

YourSCP-8300bySanyoispackedwithfeaturesthatsimplify

yourlifeandexpandyourabilitytostayconnectedtothe

peopleandinformationthatareimportanttoyou. This section

will guide you through the basic functions and calling

features of your phone.

Section 2A:Your Phone –The Basics

Front View ofYour Phone

1. Earpiece

Q w e s t

A u g 2 9 , 0 5 ( M o n )

1 0 : 3 0 a m

2. Main LCD

Memo

Web

3. Softkey (left)

17. Softkey (right)

16. Side Call Key

4. Navigation Key

5. MENU/OK

15. BACK Key

14. Side Camera Key

13. END/POWER Key

12. SPEAKER Key

11. Keypad

6. Camera Key

7. TALK Key

8. Microphone

9. Accessories Connector

10. Standard Charger

Jack

23. Antenna

24. Headset Jack

18. Speaker

19. LED Indicator

25. Ready Link/

Memo Button

Q w e s t

1 0 : 3 0 a A u g 2 9

26. Side Volume

20. Sub LCD

21. Flash

Key

22. Camera Lens

Section 2A:Your Phone –The Basics

Key Functions

1. Earpiece lets you hear the caller and automated prompts.

2. MainLCD(display) displays the phone’s main menu,

features, modes, etc.

3. Softkey(left) lets you select the menu corresponding to

the bottom left line on the Main LCD.

4. NavigationKey lets you navigate quickly and easily

through the menu options. You can access the menu

shortcuts by pressing Right: Contacts, Left: Shortcut,

Up: Messaging, and Down: Downloads.

5. MENU/OK lets you access the phone’s menus and select

menu options.

6. CameraKey lets you access the Picture & Video menu

and take pictures and videos.

7. TALKKey lets you place or receive calls, answer Call

Waiting, or use Three-Way Calling.

8. Microphone to speak into or record your voice.

9. AccessoriesConnector connects accessories such as

travel charger (included).

10. StandardChargerJack connects a standard, barrel-type

AC adapter charger (not included).

11. Keypad lets you enter numbers, letters, and characters,

and navigate within menus. Press and hold keys 2-9 for

speed dialing.

12. SPEAKERKey lets you place or receive calls in

speakerphone mode.

13. END/POWERKey lets you turn the phone on/off, end a

call, or return to standby mode.

Section 2A:Your Phone –The Basics

14. SideCameraKey lets you activate the camera and video

mode and take pictures and videos.

15. BACKKey lets you display the previous page or clear

characters from the screen.

16. SideCallKey lets you place calls without opening the

phone.

17. Softkey(right) lets you select the menu corresponding to

the bottom right line on the Main LCD.

18. Speaker lets you hear the different ringers and sounds.

You can mute the ringer when receiving incoming calls

by pressing

, or any of the side keys.

19. LEDIndicator shows your phone’s connection status at a

glance.

20. SubLCD lets you monitor the phone’s status and see

who’s calling without opening the phone.

21. Flash the built-in flash lets you take pictures and videos

in low light.

22. CameraLens the built-in camera lens lets you take

pictures and videos.

23. Antenna fully extend the antenna for the best reception.

24. HeadsetJack allows you to plug in an optional headset

for convenient, hands-free conversations.

25. ReadyLink/MemoButton allows you to access the

Ready Link List or Voice Memo menu. (See “Using Ready

Link ” on page 201 or “Managing Voice Memos” on

page 149.)

26. SideVolumeKey lets you adjust the receiver volume

during a call or ringer volume in standby mode. You can

also use it to scroll up or down to navigate through the

different menu options.

Section 2A:Your Phone –The Basics

Viewing the Display Screen

Your phone’s display screen provides a wealth of information

about your phone’s status and options. This list identifies the

symbols you’ll see on your phone’s display screen:

Tip: To view a list of your phone’s icons and descriptions, from the main

menu select Settings > Phone Info > Help.

shows your current signal strength. The more

lines you have, the stronger your signal.

means your phone cannot find a signal.

indicates the call is on hold.

tells you a call is in progress.

indicates the Ready Link service is enabled.

indicates the Ready Link service is enabled and

the speakerphone mode is set to on.

indicates the Ready Link service is disabled.

indicates Sprint PCS Vision/Ready Link access is

dormant.

indicates Sprint PCS Vision/Ready Link access is

active.

indicates Sprint PCS Vision/Ready Link access is

disabled.

indicates you are “roaming” off the network

available to you.

indicates you have missed voice calls.

indicates you have missed Ready Link calls.

Section 2A:Your Phone –The Basics

indicates you have schedule events or call alarms.

indicates you have alarm clock notifications.

indicates you have new picture messages.

indicates you have new voicemail messages.

Press and hold

to call your voicemail box.

indicates you have new text messages.

indicates you have picture messages, voicemail

messages, and text messages.

indicates you have urgent messages.

indicates you have two or more different types of

missed calls, schedule events, call alarms, or

alarm clock notifications.

shows the level of your battery charge. The more

black you see, the more power you have left.

shows your battery is charging.

indicates you have menus to scroll (in four

directions).

indicates the vibrate feature is set.

indicates volume level 4 or 1 and vibrate feature

are set.

indicates 1 beep feature is set.

indicates the voice call ringer setting is off.

indicates all the sound settings are off.

indicates the Location Service of your phone is

enabled.

indicates the Location Service of your phone is

disabled.

Section 2A:Your Phone –The Basics

indicates you have a new caller’s message.

indicates the Screen Call Auto setting is on.

indicates the Alarm Clock setting is on.

indicates your phone is in TTY mode.

indicates Headset mode is set to Ready Link and a

headset is connected.

indicates the speakerphone mode is set to on.

Note: Display indicators help you manage your roaming charges by letting

you know when you’re off the network available to you and whether you’re

operating in digital or analog mode. (For more information, see Section 2D:

Controlling Your Roaming Experience on page 91.)

Features ofYourWireless Phone

Congratulations on the purchase of your wireless phone.

The SCP-8300 by Sanyo is lightweight, easy-to-use, and

reliable, and it also offers many significant features and

service options. The following list previews some of those

features and provides page numbers where you can find out

ⅷ

Digital dual-band/tri-mode capability allows you to

make and receive calls while on the network available

to you and to roam on other analog and 1900 and 800

MHz digital networks where roaming agreements have

been implemented with other carriers (page 91).

ⅷ

Sprint PCS Vision provides access to the wireless

Internet in digital mode (page 257).

ⅷ

Email and SMS Text Messaging provide quick and

convenient messaging capabilities (pages 264 and 249,

respectively).

Section 2A:Your Phone –The Basics

ⅷ

Games, ringers, screen savers, and other applications can

be downloaded to make your phone as unique as you are

(page 268). Additional charges may apply.

The Contacts directory can store up to 300 entries with

up to seven phone numbers per entry (page 115).

A separate Ready Link Contacts List provides easy

access to up to 200 personal contacts (page 213).

ⅷ

The built-in Calendar offers several personal

information management features to help you manage

your busy lifestyle (page 128).

Your phone is equipped with a Location feature for use

in connection with location-based services that may be

available in the future (page 66).

Your phone’s external LCD display allows you to

monitor the phone’s status and to see who’s calling

without opening the phone.

ⅷ

Speed dial lets you dial phone numbers with one key

press (see page 39).

The built-in camera allows you to take full-color digital

pictures and videos, view your pictures and videos

using the phone’s display, and instantly send them to

family and friends using Sprint PCS Picture Mail service

(page 157).

ⅷ

Ready Link allows you to enjoy quick, two-way, “walkie-

talkie-style” communication with one or several Ready

Link users (page 201).

The Media Player allows you to enjoy streaming video

and audio with your phone (page 229).

Section 2A:Your Phone –The Basics

TurningYour Phone On and Off

TurningYourPhoneOn

Toturnyourphoneon:

ᮣ

Press

Once your phone is on, it may display “Looking for

service...,” which indicates that your phone is searching for

a signal. When your phone finds a signal, it automatically

enters standby mode – the phone’s idle state. At this point,

you are ready to begin making and receiving calls.

If your phone is unable to find a signal after 15 minutes of

searching, a Power Save feature is automatically activated.

When a signal is found, your phone automatically returns to

standby mode.

In Power Save mode, your phone searches for a signal

periodically without your intervention. You can also

initiate a search for service by pressing any key (when your

phone is turned on).

Tip: The Power Save feature helps to conserve your battery power when

you are in an area where there is no signal.

TurningYourPhoneOff

Toturnyourphoneoff:

ᮣ

Press and hold

for two seconds until you see the

powering down animation on the display screen.

Your screen remains blank while your phone is off (unless

the battery is charging).

Section 2A:Your Phone –The Basics

UsingYour Phone’s Battery and Charger

BatteryCapacity

Your phone is equipped with a Lithium Ion (LiIon) battery.

It allows you to recharge your battery before it is fully

drained. The battery provides up to 3.5 hours of

continuous digital talk time (up to 2 hours in analog).

When the battery reaches 5% of its capacity, the battery

icon blinks. When there are approximately 5 minutes of

talk time left, the phone sounds an audible alert and then

powers down.

Note: Long backlight settings, searching for service, vibrate mode, and

browser use affect the battery’s talk and standby times.

Tip: Be sure to watch your phone’s battery level indicator and charge the

battery before it runs out of power.

InstallingtheBattery

ToinstalltheLiIonbattery:

ᮣ

To install, insert the battery into the opening on the

back of the phone and gently press down until the

latch snaps into place.

Section 2A:Your Phone –The Basics

RemovingtheBattery

Toremoveyourbattery:

1. Make sure the power is off so that you don’t lose any

stored numbers or messages.

2. Press the battery release latch up and remove the

battery from the phone at a 45-degree angle.

ChargingtheBattery

Your phone’s LiIon battery is rechargeable and should be

charged as soon as possible so you can begin using your

phone.

Keeping track of your battery’s charge is important. If your

battery level becomes too low, your phone automatically

turns off and you will lose all the information you were just

working on. For a quick check of your phone’s battery

level, glance at the battery charge indicator located in the

upper-right corner of your phone’s display screen. If the

battery charge is getting too low, the battery icon

appears and the phone displays a warning message.

Always use a Qwest-approved desktop charger, travel

charger, or vehicle power adapter to charge your battery.

Warning: Using the wrong battery charger could cause damage to your

phone and void the warranty.

Section 2A:Your Phone –The Basics

UsingtheCharger

Tousethetravelchargerprovidedwithyourphone:

ᮣ

Plug the round end of the AC adapter into the phone’s

charger jack and the other end into an electrical

outlet.

Ⅲ

The

icon on the phone lets you know the

battery is charging.

Ⅲ

The

icon on the phone lets you know the

battery is fully charged.

It takes approximately 4 hours to fully recharge a

completely rundown battery. With the Qwest-approved

LiIon battery, you can recharge the battery before it

becomes completely run down.

DisplayingYour Phone Number

Just in case you forget your phone number, your SCP-8300

can remind you.

Todisplayyourphonenumber:

ᮣ

Press

to access the main menu, then select

Settings > PhoneInfo > Phone#/UserID. (Your phone

number and other information about your phone and

account will be displayed.)

Section 2A:Your Phone –The Basics

Changing the Faceplate

RemovingtheFaceplate

ᮣ

Press down on both edges of the faceplate and slide it

to remove.

InstallingtheFaceplate

ᮣ

Fit the hooks into the notches and slide the faceplate

until it snaps into place.

Section 2A:Your Phone –The Basics

Making andAnswering Calls

Making Calls

Placing a call from your wireless phone is as easy as making a

call from any land line phone. Just enter the number and

press

, and you’re on your way to clear calls.

Tomakeacallusingyourkeypad:

1. Make sure your phone is on.

2. Enter a phone number from standby mode. (If you make

a mistake while dialing, press

to erase one digit at

a time. Press and hold to erase the entire number.)

3. Press . (To make a call when you are roaming and

Call Guard is enabled, see “Controlling Roaming

Charges Using Call Guard” on page 96.)

4. Press

or close the phone when you are finished.

Tip: When making calls off the network available to you, always dial using

11 digits (1 + area code + phone number).

You can also place calls from your SCP-8300 by Speed

Dialing a number (page 39) and using your Call History

listings (page 110).

Important: To maximize

Correct

Incorrect

performance when using your

wireless phone, extend the

antenna before a call and do not

touch the antenna during a call.

Section 2A:Your Phone –The Basics

Dialing Options

Dialing options are displayed when you press Options (right

softkey) after entering numbers in the phone’s standby

mode.

To select an option, highlight it and press

ⅷ

Abbrev. Dial to dial the phone number in your Contacts

list that ends with the digits you entered. (See “Using

Abbreviated Dialing” on page 40.)

ⅷ

Call to dial the phone number.

Call:SpeakerOn to dial the phone number in

speakerphone mode.

ⅷ

SendMessage to send a text message (page 250), picture

(page 186), or video (page 190) (mobile numbers only).

SavePhone# to save the phone number in your Contacts

list. (See “Saving a Phone Number” on page 35.)

Find to display Contacts list entries that end with the

digits you entered. (See “Finding a Phone Number” on

page 36.)

ⅷ

H HardPause to insert a hard pause. (See “Dialing and

Saving Phone Numbers With Pauses” on page 36.)

T 2-Sec. Pause to insert a 2-second pause. (See “Dialing

and Saving Phone Numbers With Pauses” on page 36.)

Hyphen to insert a hyphen. (Hyphens are generally for

visual appeal only; they are not necessary when

entering numbers.)

Tip: To speed dial a phone number, press and hold the appropriate speed

dial key (locations 2-9). See “Assigning Speed Dial Numbers” on page 123.

Section 2A:Your Phone –The Basics

Answering Calls

Toansweranincomingcall:

1. Make sure your phone is on. (If your phone is off,

incoming calls go to voicemail.)

2. Press

to answer an incoming call.

(Depending on your phone’s settings, you may also

answer incoming calls by opening the phone or by

pressing any number key.)

Toansweranincomingcallwiththeflipclosed:

1. Make sure your phone is on. (If your phone is off,

incoming calls go to voicemail.)

2. When your phone rings or vibrates, press and hold the

Side Call key ( ) on the right side of the phone.

(The call will be answered in speakerphone mode.)

– or –

Open the phone to use the earpiece.

Note: If the setting for Open Flip is set to “No Action,” opening the phone will

not answer the call. (See “Setting the Open/Close Flip Option” on page 76.)

Your wireless phone notifies you of incoming calls in the

following ways:

ⅷ

The phone rings and/or vibrates.

ⅷ

The indicator light flashes.

ⅷ

The backlight illuminates.

ⅷ

The screen displays an incoming call message.

If the incoming call is from a number stored in your

Contacts List, the entry’s name is displayed. The caller’s

phone number may also be displayed, if available.

Section 2A:Your Phone –The Basics

When receiving a call, the following options are also

displayed by pressing Options (right softkey). To select an

option, highlight it and press

ⅷ

CallGuard to answer the call when you are in roaming

mode. (See page 96 for setting Call Guard.)

ⅷ

Answer to answer the call.

Answer:Speaker to answer the call in speakerphone

mode.

ⅷ

AnsweronHold to put the call on hold. (See “Setting

Answer on Hold” on page 28.)

ScreenCall to answer the call by using a pre-recorded

announcement. (Appears when you are in a network

service area or digital roaming area. See “Setting Up

Screen Call” on page 151.)

ⅷ

QuietRinger to mute the ringer. (Appears when the

ringer is set.)

AnsweringaRoamCallWithCallGuardEnabled

Call Guard is an option that helps you manage your roaming

charges when making or receiving calls while outside the

network available to you. Please see Section 2D:

Controlling Your Roaming Experience on page 91 for more

information about roaming.

ToansweracallwhenyouareroamingandCallGuardis

enabled:

1. Press

2. Press

to proceed while the pop-up message is

displayed.

Note: When your phone is off, incoming calls go directly to voicemail.

Section 2A:Your Phone –The Basics

SettingAnsweronHold

This feature allows you to hold an incoming call when you

cannot answer immediately.

TosetAnsweronHold:

1. When you receive an incoming call, press Options

(right softkey).

2. Highlight AnsweronHold and press . (The caller

hears a message to wait your answer. will display

on the screen while the call is on hold.)

Toresumethecall:

ᮣ

Press Answer (left softkey) or

– or –

ᮣ

Press Options (right softkey), highlight Answer or

Answer:Speaker and press

Note: Answer on Hold is not available in analog areas.

EndingaCall

To disconnect a call when you are finished:

WiththeFlipopen:

ᮣ

Close the phone or press

WiththeFlipclosed:

ᮣ

Press and hold

Note: If the setting for Close Flip is not set to “End,” closing the phone will

not end the call. (See “Setting the Open/Close Flip Option” on page 76.)

Tip: Time/Date is displayed when you press

while the phone is in use.

Section 2A:Your Phone –The Basics

Using the Speakerphone

The speakerphone feature lets you hear audio through the

speaker and talk without holding the phone. When the

speakerphone is activated, use the volume control keys on

the side of the phone to adjust the volume.

Toturnthespeakerphoneonduringacall:

ᮣ

Press

– or –

Press Options (right softkey), highlight SpeakerOn, and

press

Toturnthespeakerphoneoffduringacall:

ᮣ

Press

– or –

Press Options (right softkey), highlight SpeakerOff, and

press

Tip: You can adjust the speakerphone volume using the Side Volume key or

the navigation key.

Warning! Due to higher volume levels, do not place the phone near your

ear during speakerphone use.

Section 2A:Your Phone –The Basics

Changing the RingerVolume

To change the ringer volume, press the Side Volume key

when the phone is open and in standby mode.

Note: To change the ringer volume from the main menu, see “Adjusting the

Phone’s Volume Settings” on page 53.

AdjustingVolume During a Conversation

When you need to adjust the receiver volume during a

conversation, use the side volume key, or press the

navigation key up or down while a call is in progress.

Muting a Call

There are times when it’s necessary to mute a call so that

your caller does not hear you or certain background noise.

Tomuteacall:

ᮣ

Press Options (right softkey), highlight Mute, and

press . (When the phone is muted, “Muted”

appears on the display.)

Tounmuteacall:

ᮣ

Press Options (right softkey), highlight Unmute, and

press

Tip: You can also mute a call with the flip closed. Simply press

which

is located on the side of your phone.

Section 2A:Your Phone –The Basics

Missed Call Notification

When an incoming call is not answered, the Missed Call log

and the

icon are displayed on your screen.

TocalltheMissedCallentry:

ᮣ

Press

Tip: If you have two or more notifications, the event list will appear.

ToerasetheMissedCalllog:

ᮣ

Press Dismiss (right softkey).

Tip: If you press

before checking your notification, Events (right

softkey) appears in standby mode. Press Events (right softkey) to display

the notification list. To call the entry, highlight the entry and press Call (left

softkey).

Section 2A:Your Phone –The Basics

Calling Emergency Numbers

WXYZ

You can place calls to 911 (dial

and press

), even if your phone is locked or your account is

restricted. When you place an emergency call, your phone

automatically enters Emergency mode.

Press Options (right softkey) to display the options. To

select an option, highlight it and press

ⅷ

SpeakerOn to activate speakerphone mode. (If you are

in speakerphone mode, the option will appear as

SpeakerOff to deactivate.)

ⅷ

UnlockPhone to unlock your phone (appears only if the

phone is locked).

CloseMenu to close the pop-up menu (appears only if

the phone is unlocked).

Tip: Press MyPhone(left softkey) to display your phone number during

Emergency mode.

ToexitEmergencymode:

1. Press

2. Press Options (right softkey) to display the options.

3. Highlight ExitEmergency and press

Note: When you are in Emergency mode, you can only exit from the

options menu.

Section 2A:Your Phone –The Basics

ToselectEmergencymodeoptions:

1. Press during a 911 call.

2. Press Options (right softkey).

Ⅲ

Call911 to call 911.

Ⅲ

Call911:Speaker to call 911 in speakerphone mode.

Ⅲ

ExitEmergency to exit Emergency mode.

3. Highlight an option and press

In-Call Options

Pressing Options (right softkey) during a call displays a list of

features you may use during the course of a call. To select

an option, highlight it and press . The following options

are available through the Options menu:

ⅷ

Flash to answer an incoming Call Waiting call or to

connect a third party during Three-Way Calling.

ⅷ

Mute or Unmute to mute or reactivate your phone’s

microphone.

ⅷ

SpeakerOn or SpeakerOff to activate or deactivate

speakerphone mode.

Warning! Due to higher volume levels, do not place the phone near your

ear during speakerphone use.

ⅷ

Three-WayCall to call a third party.

ⅷ

CallHistory to access the Call History menu. (See

“Managing Call History” on page 107.)

ⅷ

Contacts to access the Contacts menu. (See “Using the

Contacts Directory” on page 115.)

Section 2A:Your Phone –The Basics

ⅷ

Messaging to access the Messaging menu. (See

“Accessing Messaging” on page 264.)

Settings to access the Settings menu. (See “Controlling

Your Phone’s Settings” on page 47.)

Tools/Extras to access the Tools/Extras menu. (See

“Using the phone’s Calendar and Tools” on page 127.)

Note: The Flash menu appears only for Call Waiting and Three-Way Calling.

The Mute menu does not appear during a 911 call. The Three-Way Call

menu does not appear in Roaming areas.

End-of-Call Options

To display the following options, press Options (right

softkey) within 10 seconds after disconnecting a call.

To select an option, highlight it and press

ⅷ

CallAgain to dial the phone number.

ⅷ

Call:SpeakerOn to dial the phone number in

speakerphone mode.

ⅷ

SavePhone# to save the phone number in your Contacts

list.

Ⅲ

GotoPhoneBook appears when the number is

already in your Contacts list. (See “Saving a Phone

Number” on page 35.)

Note: The End-of-Call options are not displayed for calls identified as

No ID or Restricted.

Section 2A:Your Phone –The Basics

Saving a Phone Number

Your SCP-8300 can store up to 500 phone numbers in up to

300 Contacts entries (an entry may contain up to seven

numbers). Each entry’s name can contain 16 characters.

Your phone automatically sorts the Contacts entries

alphabetically. (For more information, see Section 2G:

Using the Contacts Directory on page 115.)

Tosaveanumberfromstandbymode:

1. Enter a phone number.

2. Press Options (right softkey).

3. Highlight SavePhone# and press

4. Select a label and press

5. Enter a name and press . If you have already stored

entries in the Contacts list, you are prompted to select

the following entry modes:

Ⅲ

NewName to enter a new name.

Ⅲ

FromPh. Book to select a name from the Contacts

entry list.

6. Press Save (left softkey).

Section 2A:Your Phone –The Basics

Finding a Phone Number

You can search Contacts list entries for phone numbers that

contain a specific string of numbers.

Tofindaphonenumber:

1. Enter the last four or more digits of the number and

press Options (right softkey). (The more numbers you

enter, the more specific the search becomes.)

2. Highlight Find and press . (The Contacts entry that

ends with the digits you entered appears.)

3. Scroll to your desired entry.

Ⅲ

Press

to display the entry details.

or to dial.

Ⅲ

DialingandSavingPhoneNumbersWithPauses

You can dial or save phone numbers with pauses for use

with automated systems, such as voicemail or credit card

billing numbers.

There are two types of pauses available on your phone:

ⅷ

HardPause sends the next set of numbers when you

press

ⅷ

2-Sec. Pause automatically sends the next set of

numbers after two seconds.

Note: You can have multiple pauses in a phone number and combine 2-

second and hard pauses.

Section 2A:Your Phone –The Basics

Todialorsavephonenumberswithpauses:

1. Enter the phone number and press Options (right

softkey).

2. Highlight either HardPause or 2-Sec. Pause and

press . (Hard pauses are displayed as a “H” and

2-second pauses as a “T”.)

3. Enter additional numbers (for example, a passcode or

an extension).

4. To dial the number, press

. (When dialing

to send the

a number with a hard pause, press

next set of numbers.)

– or –

To save the number in your Contacts list, press Options

(right softkey), highlight SavePhone#, and press

Plus (+) Code Dialing

Plus Code Dialing automatically dials the international

access code for the country in which you are travelling –

including for calls back to the United States.

TomakeacallusingPlusCodeDialing:

1. Press and hold

until a “+” appears on your phone

display.

2. Dial the country code and phone number you’re

calling and press . (The access code for

international dialing will automatically be dialed,

followed by the country code and phone number.)

Section 2A:Your Phone –The Basics

Dialing From the Contacts Directory

TodialdirectlyfromaContactsentry:

1. Press

to access the main menu.

2. Select Contacts.

3. Select Find/AddEntry (

Shortcut: Press the navigation key right to list entries.

4. Scroll to the desired entry in the Contacts list and

press

5. Select the number you want to call.

6. Press Options (right softkey) for the menu options.

7. Highlight Call or Call:SpeakerOn and press

to place

a call.

Tip: You can also place a call by pressing

, or Call (left

softkey) during step 5 above.

Note: The icons next to each entry represent the Contacts labels (for

example, Mobile, Home, Work, etc.). A triangle next to an icon means there

is another label for the entry. Press the navigation key right or left to select

the desired label.

Section 2A:Your Phone –The Basics

Using Speed Dialing

With this feature, you can dial your favorite entries using

one key press for locations 2-9. (See “Assigning Speed Dial

Numbers” on page 123.)

Tousespeeddialforvoicecalls:

ᮣ

From standby mode, press and hold the appropriate

key for approximately two seconds.

– or –

ᮣ

From standby mode, press the appropriate key and

press

The display confirms that the number has been dialed

when it shows “Connecting...”.

TousespeeddialforReadyLinkcalls:

ᮣ

From standby mode, press the appropriate key and

press

. (See “Assigning Speed Dialing for

Ready Link Entries” on page 222.)

The display confirms that the number has been dialed

when it shows “R-Link calling...”.

Note: Speed dialing is not available when you are roaming; when you are

roaming off the network available to you, you must always dial using

eleven digits (1 + area code + number).

Section 2A:Your Phone –The Basics

Using Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It

allows you to dial a number by entering the last 3-6 digits of

any number in your Contacts directory. This feature

becomes available when you enable Abbreviated Dialing

and enter the appropriate digits of a phone number. (See

“Setting Abbreviated Dialing” on page 78.)

ToplaceacallusingAbbreviatedDialing:

1. Dial the last 3-6 digits of a contact’s phone number.

2. Press Options (right softkey) to display the dialing

options.

3. Highlight Abbrev. Dial and press

Tip: You can also place a call by pressing

, or

during step 2 above.

Note: If there is no matched number, your phone dials the number you set

for abbreviated dial with the last four or five digits you entered. If there are

matched numbers in your Contacts list, the abbreviated dial list will be

displayed. To place a call, select a number and press

Section 2A:Your Phone –The Basics

EnteringText

Selecting a Character Input Mode

Your SCP-8300 provides convenient ways to enter words,

letters, punctuation, and numbers whenever you are

prompted to enter text (for example, when adding a Contacts

entry or when using Email and SMS Text Messaging).

Tochangethecharacterinputmode:

1. When you display a screen where you can enter text,

press Mode (right softkey).

2. Select a character input mode:

Ⅲ

AddWord to store words that you use frequently

(see page 43).

Ⅲ

PresetMessages to enter preset messages (see

page 69).

Ⅲ

RecentMessages to enter messages you have used

recently.

Ⅲ

Signature to enter your signature (see page 68).

Ⅲ

T9Word to enter characters using predictive

T9 Text Input (see page 42).

Ⅲ

Alphabet to enter characters by tapping the keypad

(see page 45).

Ⅲ

SYMBOL to enter symbols.

Ⅲ

NUMBER to enter numbers.

Ⅲ

PRESETSUFFIX to enter a preset suffix.

Ⅲ

SMILEYS to enter smile pictures.

Ⅲ

Emoticons to enter an emotion icon.

Ⅲ

SelectLanguage to select the language (English or

Spanish).

Section 2A:Your Phone –The Basics

Ⅲ

EraseAll to erase all text (if applicable).

Paste to paste copied or cut text (if applicable).

SelectText to select stored text for copying or

cutting.

Note: Preset Messages, Recent Messages, Signature and Emoticons are

only available when composing text messages.

Shift

Tip: When entering text, press the

key to change letter capitalization

(Abc > ABC > abc).

Entering Characters Using T9Text Input

T9 Text Input lets you enter text in your phone by pressing

keys just once per letter. (To select the T9Word mode when

entering text, see “Selecting a Character Input Mode” on

page 41.)

T9 Text Input analyzes the letters you enter using an

intuitive word database and creates a suitable word. (The

word may change as you type.)

ToenterawordusingT9TextInput:

1. Select the T9Word character input mode. (See

“Selecting a Character Input Mode” on page 41.)

2. Press the corresponding keys once per letter to enter a

word (for example, to enter the word “Bill,” press

ABC

GHI

JKL

). (If you make a mistake, press

to erase a single character. Press and hold to

delete word by word.)

Space

3. To accept a word and insert a space, press

Section 2A:Your Phone –The Basics

AddingaWordtotheT9Database

If a word you want to enter does not display as an option

when you are using T9 Text Input, you can add it to the

database.

ToaddawordtotheT9TextInputdatabase:

1. Select the AddWord mode. (See “Selecting a Character

Input Mode” on page 41.)

2. Enter the word using multi-tap (Alphabet) text entry

and press Save (left softkey).

– or –

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select TextEntry.

5. Select AddWord.

6. Enter the word using multi-tap (Alphabet) text entry

and press Save (left softkey).

Toeditorerasethewordsyouhaveadded:

1. Follow steps 1-4 above.

2. Select MyWords.

3. Select your desired word and press Options (right

softkey).

4. To select an option, highlight it and press

Ⅲ

Edit to edit a word in My Words.

Ⅲ

Erase to erase a word in My Words.

Section 2A:Your Phone –The Basics

CustomizingtheT9Settings

TocustomizetheT9Settings:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select TextEntry.

5. Select T9Settings.

6. Select your desired option and press

Ⅲ

Predict.TxtMode to allow T9 text input to recognize

words you have added to the T9 database.

Ⅲ

WordChoiceList to display word choice list.

Showaftenter to select digits number (1-3 digits) to

display the words choice list. The word choice list

will display based on the number of digits you

selected.

Ⅲ

Showaftwait to select how many seconds the

phone should wait to display the words choice list.

For more information about T9 Text Input, visit the Tegic

Web site at www.t9.com.

Section 2A:Your Phone –The Basics

Entering Characters by Tapping the Keypad

Toentercharactersbytappingthekeypad:

1. Select the Alphabet mode. (See “Selecting a Character

Input Mode” on page 41.)

2. Press the corresponding keys repeatedly until the

desired letter appears (for example, to enter the word

ABC

GHI

JKL

“Bill,” press

times, and

twice,

three times,

three

JKL

three times again). (If you make a

to erase a single character. Press

to delete word by word.)

mistake, press

and hold

By default, the first letter of an entry is capitalized and the

following letters are lowercase. After a character is entered,

the cursor automatically advances to the next space after

two seconds or when you enter a character on a different key.

Characters scroll in the following order:

English Sequence

Key

Upper Case

Lower Case

.,@ 1 ? ! # /

A B C 2

ABC

DEF

a b c 2

D E F 3

G H I 4

J K L 5

M N O 6

P Q R S 7

T U V 8

W XY Z 9

d e f 3

g h i 4

j k l 5

m n o 6

p q r s 7

t u v 8

GHI

JKL

MNO

PQRS

TUV

WXYZ

w x y z 9

Space

Shift

Space

Unshifted One-character- shifted Caps Lock

Section 2A:Your Phone –The Basics

In Spanish mode, characters scroll in the following order:

Spanish Sequence

Key

Upper Case

Lower Case

.,@ 1 ¿ ? ¡ ! # /

A Á B C 2

D E É F 3

G H I Í 4

J K L 5

ABC

DEF

a á b c 2

d e é f 3

g h i í 4

GHI

JKL

j k l 5

MNO

PQRS

TUV

WXYZ

M N Ñ O Ó 6

P Q R S 7

T U Ú Ü V 8

W XY Z 9

m n ñ o ó 6

p q r s 7

t u ú ü v 8

w x y z 9

Space

Shift

Space

Unshifted One-character- shifted Caps Lock

(See “Display Language” on page 75 for changing to

Spanish language mode.)

Section 2A:Your Phone –The Basics

Section 2B

Controlling Your Phone’s Settings

In This Section

ࡗ

SoundSettings

DisplaySettings

LocationSettings

MessagingSettings

AirplaneMode

TTYUse

PhoneSetupOptions

Usingthemenuoptionsavailableonyourwirelessphone, you

cancustomizeyourphonetosound, look, andoperatejustthe

wayyouwantitto. This section describes how you can

change your phone’s settings to best suit your needs.

Take a few moments to review these options and to

adjust or add settings that are right for you.

Section 2B:ControllingYour Phone’s Settings

Sound Settings

RingerTypes

Ringer types help you identify incoming calls and messages.

You can assign ringer types to individual Contacts entries,

types of calls, and types of messages.

ⅷ

PreprogrammedRingers include a variety of standard

ringer types and familiar music.

ⅷ

VibratingRinger alerts you to calls or messages without

disturbing others.

ⅷ

DownloadedRingerscan be downloaded right to your

phone. (See “Downloading Premium Services Content”

on page 268.)

SelectingRingerTypesforVoiceCalls

Your wireless phone provides a variety of ringer options

that allow you to customize your ring and volume settings.

These options allow you to identify incoming calls by the

ring.

Toselectaringertypeforvoicecalls:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select RingerType (

5. Select VoiceCalls.

ABC

6. Select WithCallerID or NoCallerID.

7. Scroll to your desired ringer type and press

Section 2B:ControllingYour Phone’s Settings

Toselectadistinctiveringerforvoicecallswhileroaming:

1. Press to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select RingerType (

5. Select VoiceCalls.

6. Select Roaming.

ABC

7. Select Distinctive. (Select Normal to deactivate this

feature.)

Note: The Normal ringer is available only when you are in a digital roaming

area.

SelectingRingerTypesforReadyLinkCalls

ToselectaringertypeforReadyLinkcalls:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select RingerType (

5. Select ReadyLink.

ABC

6. Select ReadyLinkCalls, R-LinkMissed, or

R-LinkFloorTone.

7. Scroll to your desired ringer type and press

Section 2B:ControllingYour Phone’s Settings

SelectingRingerTypesforVoicemail,Messaging,or

Calendar/Alarm

Toselectaringertypeforvoicemail,messaging,or

calendar/alarm:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select RingerType (

ABC

5. Select Voicemail, Messaging, or Calendar/Alarm.

6. Press , scroll to your desired ringer type, and

press

Selecting a Tone Length

Your phone offers a number of options for selecting the

audible tones accompanying a key press. (Longer tone

lengths may be better for tone recognition when dialing

voicemail or other automated systems.)

Toselectatonelength:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

MNO

4. Select Others (

5. Select ToneLength.

6. Select Short or Long.

Section 2B:ControllingYour Phone’s Settings

Setting a Start-up/Power-offTone

Tosetastart-up/power-offtone:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

MNO

4. Select Others (

5. Select Start-upTone or Power-offTone.

6. Scroll to your desired tone and press

Using Voice Prompt

This feature allows you to hear voice prompts at Voice

Memo, Screen Call setting, etc. (default setting is Off).

Toenableordisablevoiceprompt:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

MNO

4. Select Others (

5. Select VoicePrompt.

6. Select On or Off.

Tip: When ringer volume is set to “Silence All,” voice prompts cannot be

heard.

Section 2B:ControllingYour Phone’s Settings

Setting Up Key Press Echo

With this feature, you can hear a voice say the numbers

when you press the keypad. This feature is available when

you are in standby mode.

ToturnKeyPressEchoonoroff:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

MNO

4. Select Others (

5. Select KeyPressEcho.

6. Select On or Off.

Section 2B:ControllingYour Phone’s Settings

Adjusting the Phone’s Volume Settings

You can adjust your phone’s volume settings to suit your

needs and your environment.

Toadjusttheringerandkeyvolume:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select Ringer/KeyVol. (

5. Select RingerVolume, Calendar/Alarm, Start-up/Pw-off,

or KeyBeep.

6. Using the navigation key, choose a volume level and

press

Toadjusttheearpieceorspeakervolume:

1. Press to access the main menu.

2. Select Settings.

3. Select Sounds (

GHI

4. Select ReceiverVol. (

5. Select either Earpiece or Speaker.

6. Using the navigation key, choose a volume level and

press

Tip: You can adjust the ringer volume in standby mode (or the earpiece

volume during a call) by using the Side Volume key.

Section 2B:ControllingYour Phone’s Settings

Toadjusttheapplicationvolume:

This setting is available for the volume of video, Media

Player, downloaded data, and browser.

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

JKL

4. Select ApplicationVol. (

5. Using the navigation key, choose a volume level and

press

Alert Notification

Your SCP-8300 can alert you with an audible tone when you

change service areas, once a minute during a voice call, for

incoming or missed Ready Link calls, or when a call has

been connected.

Tosetalerts:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

DEF

4. Select Alerts (

5. Select your desired option and press

Ⅲ

Service sets an alert to notify you of network

services parameter changes.

Ⅲ

ReadyLink sets an alert to notify you of Ready Link

calls. Select ReadyLinkCalls for incoming Ready

Link calls, or R-LinkMissed for missed Ready Link

calls.

Section 2B:ControllingYour Phone’s Settings

Ⅲ

Voicemail sets an alert to notify you of voice

messages. Select RingerLength to set the ringer

length of Voicemail notification.

Messaging sets an alert to notify you of text

messages. Select RingerLength to set the ringer

length of Messaging notification.

Ⅲ

MinuteBeep sets a minute reminder that beeps ten

seconds before the end of each minute during a call.

SignalFade sets an alert to notify you when your

phone loses a signal during a call.

6. Use your navigation key to select a setting and press

Tip: You can select Once or Repeat Alert if you select Ready Link Calls,

R-Link Missed, Voicemail, or Messaging. Repeat Alert sounds an alert

every two minutes for twenty minutes.

Section 2B:ControllingYour Phone’s Settings

SilenceAll

There may be times when you need to silence your phone

entirely. The phone’s Silence All option allows you to mute

all sounds without turning your phone off.

ToactivateSilenceAll:

1. Press

to access the main menu.

2. Select Settings.

3. Select Sounds (

4. Select Ringer/KeyVol. (

5. Select RingerVolume.

6. Press the navigation key down until SilenceAll

appears on the display and press

Tip: When Ringer Volume is set as Silence All, other items are changed to

Off and cannot be highlighted.

TodeactivateSilenceAll:

ᮣ

Press the volume key up repeatedly to select a desired

volume level.

Section 2B:ControllingYour Phone’s Settings

Display Settings

Changing the Text Greeting

The text greeting can be up to fifteen characters and is

displayed on your phone’s screen in standby mode. You

may choose to keep the phone’s default greeting

(“Qwest”), or you may enter your own custom greeting.

Todisplayorchangeyourcustomgreeting:

1. Press

to access the main menu.

2. Select Settings.

3. Select Display (

4. Select Greeting.

ABC

5. Select Custom (

Ⅲ

You can customize the greeting by entering a

personalized greeting. (See “Entering Text” on

page 41.)

6. Enteracustom greetingusingyourkeypad andpress

Todisplaythedefaultgreeting(“Qwest”):

1. Press

to access the main menu.

2. Select Settings.

3. Select Display (

4. Select Greeting.

5. Select Default (

ABC

Section 2B:ControllingYour Phone’s Settings

Changing the BacklightTime Length

The backlight setting lets you select how long the display

screen and keypad are backlit after any key press is made.

TochangetheMainLCDorSubLCDbacklightsetting:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select Backlight.

5. Select MainLCD or SubLCD.

6. Select AlwaysOn, AlwaysOff, or your defined time

length.

Ⅲ

AlwaysOff always turns the backlight off.

Ⅲ

AlwaysOn keeps the backlight on indefinitely.

Note: The Always On setting returns to the previous value the next time

you turn on the phone.

TochangetheKeypadbacklightsetting:

1. Select Key during step 5 above.

2. Select AlwaysOff or your defined time length.

Note: Long backlight settings affect the battery’s talk and standby times.

Section 2B:ControllingYour Phone’s Settings

Changing the Display ScreenAnimation

Your new phone offers options for what yousee on the

display screen during various phone functions.

Tochangetheanimationdisplay:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select Animation.

5. Select Standby, OutgoingCalls, or ServiceSearch.

6. Press , scroll to your desired option and press

Ⅲ

For standby, you can also set the animation

starting time. Select after and select a time setting

and press

7. Press OK (left softkey) to assign the desired image.

Changing the Display for Incoming Calls

You can set the color or downloaded image to be shown on

the Incoming Calls display.

Tochangetheincomingcallsdisplay:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select IncomingCalls.

5. Press , scroll to your desired option and press

6. Press OK (left softkey) twice to assign the desired

color or image.

Section 2B:ControllingYour Phone’s Settings

Changing the Display for Area Name

This feature enables you to show the area of the phone

number you are calling or are called from when the number

is not registered in your Contacts list. For example, a call to

or from 213-555-5555 will display “California.”

Tosetyourareanamedisplay:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select MatchAreaCode.

5. Select On or Off.

Ⅲ

This feature is available only when the phone

number is 10 digits, or 11 digits beginning with

1 and matches an area code.

Ⅲ

The area name will not be displayed when the

number of an incoming call is saved in your

Contacts list.

Section 2B:ControllingYour Phone’s Settings

Changing the Display for Standby Mode

This feature enables you to select a variety of items to

display in standby mode.

Tosetyourstandbydisplay:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select StandbyDisplay.

5. Select MainLCD and select Others.

– or –

Select SubLCD.

6. Select your desired item and press

Ⅲ

ScreenSaver displays the screen saver.

Ⅲ

Calendar displays the calendar. (Main LCD only.)

DigitalClock displays the local time in digital view.

AnalogClock displays the local time in analog view.

WorldClock displays the time of the selected city

or country along with the local time.

Ⅲ

Default returns the standby display to its default

setting.

7. Press

to save the setting to follow each system

prompt or when confirming the preview display.

Tip: In an area without service, the signal search display appears instead

of the display for standby mode.

Section 2B:ControllingYour Phone’s Settings

Changing the Screen Saver

Your new phone offers you the option of displaying a

screen saver while in standby mode.

Tochangethescreensaver:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select StandbyDisplay.

5. Select MainLCD or SubLCD.

6. Select ScreenSaver.

7. Press , scroll to your desired option and press

8. Press OK (left softkey) twice to assign the screen saver.

Changing the Phone’s Menu Style

Your phone allows you to choose how the main menu

appears on your display screen.

Tochangethemainmenustyle:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select MainMenu.

5. Select either Graphic or Text.

Section 2B:ControllingYour Phone’s Settings

Changing the Display for My Buddy

This feature enables you to see a funny animation on the

Main LCD and Sub LCD by opening the flip.

ToactivateordeactivateMyBuddy:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select MyBuddy.

5. Select MainLCD or SubLCD.

6. Select On or Off.

Changing the Background

You can customize your phone display’s appearance by

selecting a color scheme to reflect your personality.

Tochangethedisplay’sbackground:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select Background.

5. Select MainLCD or SubLCD.

6. Select your desired color.

Section 2B:ControllingYour Phone’s Settings

Changing the Font Size

You can change the font size settings for the message and

browser.

Tochangethefontsize:

1. Press

to access the main menu.

2. Select Settings.

3. Select Display (

4. Select FontSize.

ABC

5. Select either Messaging or Browser.

6. Select your desired font size.

Tip: From the font example display, select your desired font size by

pressing the navigation key right or left.

Section 2B:ControllingYour Phone’s Settings

Setting Return to Standby Mode

This feature allows you to select the way to return to

standby mode.

Tosetthisfeature:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select ReturntoIdle.

5. A message appears. Press OK (left softkey) to continue.

6. Select Automatically or EndKey.

Ⅲ

Automatically to return to standby mode

automatically in 30 seconds.

Ⅲ

EndKey to return to standby mode by pressing

Note: End Key setting affects the battery’s talk and standby times.

Sleep Mode

This feature helps conserve your battery power by

restricting the display.

Tosetsleepmode:

1. Press

to access the main menu.

2. Select Settings.

ABC

3. Select Display (

4. Select SleepMode.

5. Select MainLCD or SubLCD.

6. Select your desired option. (Select Off to deactivate

this feature.)

Section 2B:ControllingYour Phone’s Settings

Location Settings

Your wireless phone is equipped with a Location feature for

use in connection with location-based services that may be

available in the future.

The Location feature allows the network to detect your

position. Turning Location off will hide your location from

everyone except 911.

Note: Even if the Location feature is enabled, no service may use your

location without your express permission, unless the service called

cannot identify the caller.

Toturnyourphone’sLocationfeatureonoroff:

1. Press

to access the main menu.

2. Select Settings.

JKL

3. Select Location (

). (The Location disclaimer

displays.)

4. Read the disclaimer and press OK (left softkey).

5. Select On or Off.

When the Location feature is on, your phone’s standby

screen will display the icon. When Location is turned

off, the icon will display.

Section 2B:ControllingYour Phone’s Settings

Messaging Settings

Staying connected to your friends and family has never

been easier. With your phone’s advanced messaging

capabilities, you can send and receive many different kinds

of text messages without placing a voice call. (For more

information, see “Accessing Messaging” on page 264.)

Your phone’s messaging settings make text messaging even

faster and easier by letting you decide how you would like

to be notified of new messages, create a signature with each

sent message, and create your own canned messages, to

name just a few.

DisplayingPop-upMessages

When you receive a text message, your phone notifies you

by displaying an icon on your display screen. You can also

choose to be notified with a larger pop-up message on your

display screen.

Todisplaypop-upmessages:

1. Press

to access the main menu.

2. Select Settings.

PQRS

3. Select Messaging(

4. Select Notification (

5. Select MsgsandIcon or IconOnly.

Section 2B:ControllingYour Phone’s Settings

AddingaCustomizedSignature

Each message you send can have a customized signature to

reflect your personality.

Toaddacustomizedsignaturetoeachsentmessage:

1. Press

to access the main menu.

2. Select Settings.

PQRS

3. Select Messaging(

and select On.

6. Select Text.

GHI

4. Select Signature(

5. Press

7. Enter your signature and press OK (left softkey).

8. Press Save (left softkey) to save your signature.

Note: You can insert your signature even when your signature setting is off.

Press Mode (right softkey) and select Signature while composing your

message.

Section 2B:ControllingYour Phone’s Settings

ManagingPresetMessages

Your phone is pre-set with twenty canned messages each in

English and Spanish to help make sending text messages

faster and easier. These messages, such as “Where are you?,”

“Let’s get lunch.,” and “Meet me at,” can be customized or

deleted to suit your needs. You can even add your own

preset messages to the list.

Toeditapresetmessage:

1. Press

to access the main menu.

2. Select Settings.

PQRS

3. Select Messaging(

ABC

4. Select PresetMsgs(

). (The list of preset messages

displays.)

5. Select the message you want to edit.

6. Use your keypad to edit the message and press OK (left

softkey) to save your changes. (“Preset Msgs Saved”

will display.)

Ⅲ

To reset all messages, press Options (right softkey)

and select ResetAllMsgs during step 5 above.

Tochangethelanguageofthepresetmessages:

1. Follow steps 1-4 above.

2. Press Options (right softkey) and select SelectLanguage.

3. Select English or Spanish.

Note: For information on editing text, see “Entering Text” on page 41.

Section 2B:ControllingYour Phone’s Settings

Setting a Callback Number

With this feature, you can notify your recipients of your

callback number with the text message.

Tosetthecallbacknumber:

1. Press

to access the main menu.

2. Select Settings.

PQRS

3. Select Messaging (

DEF

4. Select SendCallback# (

5. Select an option from the following.

Ⅲ

None to send no callback number.

Ⅲ

MyPhone# to send your phone number.

Ⅲ

Other to send a specific callback number. To set a

number, enter a phone number and press

Section 2B:ControllingYour Phone’s Settings

Airplane Mode

Airplane Mode allows you to use many of your phone’s

features, such as Games, Voice Memos, etc., when you are

in an airplane or in any other area where making or

receiving calls or data is prohibited. When your phone is in

Airplane Mode, it cannot send or receive any calls or access

online information.

TosetyourphonetoAirplaneMode:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select AirplaneMode. (The Airplane Mode disclaimer

displays.)

5. Read the disclaimer and press OK (left softkey).

6. Select Onor Off.

While in Airplane Mode, your phone’s standby screen will

display “Phone Off.”

Section 2B:ControllingYour Phone’s Settings

TTY Use

ATTY(alsoknownasaTDDorTextTelephone)isa

telecommunicationsdevice that allows people who are

deaf, hard of hearing, or who have speech or language

disabilities, to communicate by telephone.

Your phone is compatible with select TTY devices. Please

check with the manufacturer of your TTY device to ensure

that it supports digital wireless transmission. Your phone

and TTY device will connect via a special cable that plugs

into your phone’s headset jack. If this cable was not

provided with your TTY device, contact your TTY device

manufacturer to purchase the connector cable.

When establishing your service, please call Qwest via the

state Telecommunications Relay Service (TRS) by first

PQRS

dialing

. Then provide the state TRS

with this number: 866-727-4889.

Section 2B:ControllingYour Phone’s Settings

ToturnTTY Modeonoroff:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select TTY. (You will see a message on the display.)

5. Press OK (left softkey) to continue.

6. Select Enable or Disable.

Note: In TTY Mode, your phone will display the icon.

Note: If TTY mode is enabled, the audio quality of non-TTY devices

connected to the headset jack may be impaired.

IMPORTANT NOTICE: 911 Emergency Calling

Qwest recommends that TTY users make emergency calls by other

means, including Telecommunications Relay Services (TRS), analog

cellular, and landline communications. Wireless TTY calls to 911 may be

corrupted when received by public safety answering points (PSAPs)

rendering some communications unintelligible. The problem encountered

appears related to TTY equipment or software used by PSAPs. This matter

has been brought to the attention of the FCC, and the wireless industry and

PSAP community are currently working to resolve this.

Section 2B:ControllingYour Phone’s Settings

Phone Setup Options

Shortcut

Your phone offers you the option of assigning a shortcut

key to a favorite or often-used function. Pressing the

navigation key to the left in standby mode will launch your

personally designated shortcut.

Toassignyourshortcutkey:

1. Press the navigation key left.

2. Select an unassigned number and press Add (right

softkey).

3. Select your desired menu and press Set (right softkey).

Toedittheshortcutname:

1. Press the navigation key left.

2. Select your desired menu and press Options (right

softkey).

3. Highlight EditName and press

4. Edit the name and press OK (left softkey).

5. Press Save (left softkey) to save the name.

Toresettheshortcut:

1. Press the navigation key left.

2. Select your desired menu and press Options (right

softkey).

3. Highlight Reset and press

4. Select Yes.

Ⅲ

To reset all shortcuts, select ResetAll during step 3

above.

Section 2B:ControllingYour Phone’s Settings

AutoAnswer Mode

You may set your phone to automatically pick up incoming

calls in speakerphone mode or when connected to an

optional hands-free car kit and headset.

TosetAutoAnswermode:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select AutoAnswer.

5. Select CarKit/Headset or Speakerphone.

6. Select 5Seconds, 15Seconds, or Off.

Display Language

You can choose to display your phone’s onscreen menus in

English or in Spanish.

Toassignalanguageforthephone’sdisplay:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select Language.

5. Select English or Español.

Section 2B:ControllingYour Phone’s Settings

Setting the Open/Close Flip Option

This feature enables you to answer an incoming call by

opening the flip or to end a call by closing the flip.

ToactivatetheOpenFlipfeature:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select Open/CloseFlip.

5. Select Open.

6. Select AnswerCall.

Ⅲ

To deactivate this feature, select NoAction during

step 6 above.

ToactivatetheCloseFlipfeature:

1. From step 5 above, select Close. (You will see a

message on the display.)

2. Press OK (left softkey) to continue.

3. Select an option from the following.

Ⅲ

End to end the call.

Ⅲ

Continue(Mute) to continue the call. Your voice is

muted, however you can hear the caller’s voice

from the speaker.

Ⅲ

Contin(Unmute) to continue the call. You can hear

the caller’s voice and speak to the phone to answer.

Note: The Close Flip feature does not apply during Ready Link calls or

when you are using the speakerphone, a headset, or a car kit.

Section 2B:ControllingYour Phone’s Settings

Setting Any KeyAnswer

This feature allows you to answer incoming calls by

pressing any key (except

, softkeys and sidekeys).

Toturnanykeyansweronoroff:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select AnyKeyAnswer.

5. Select On or Off.

Setting the Side Key Guard

This feature enables you to lock your side keys while the

flip is closed.

ToturnanySideKeyGuardonoroff:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select SideKeyGuard.

5. Select On or Off.

Note: This feature does not apply when the flip is open.

Tip: You can deactivate this feature temporarily to use side keys by

pressing and holding

while the clamshell is closed.

Section 2B:ControllingYour Phone’s Settings

Setting the Text Entry Options

Tosetthetextentryoptions:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select TextEntry.

5. Select your desired option and press

Ⅲ

Auto-Capital to set the auto-capital On or Off.

Ⅲ

MyWords to set your original words.

InputLanguage to select the language (English or

Spanish).

Ⅲ

T9Settings t o c ustomiz e t h e T 9 s etting s (se e p ag e 4 2).

AddWord to store words that you use frequently

(see page 43).

Setting Abbreviated Dialing

Abbreviated Dialing is another form of speed dialing. It

allows you to dial a number by entering 3-6 digits of any

number in your Contacts Directory. If the digits you enter

do not match any stored Contacts entry, your phone will

automatically prepend the digits you specify.

Toactivatethisfeature:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select Abbrev. Dial.

5. Select Ph. BookMatch.

6. Select Enable.

Section 2B:ControllingYour Phone’s Settings

Tosetyourprependnumber:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select Abbrev. Dial.

5. Select Prepend.

6. Select Enable.

7. Select Prepend#.

8. Enter a five- or six-digit number and press OK (left

softkey).

Ⅲ

To deactivate this feature, highlight Disable during

step 6 above.

Tip: To dial the prepend number, see “Using Abbreviated Dialing” on

page 40.

Note: This setting does not apply to 911 or Directory Assistance.

Headset Mode

This feature allows you hands-free phone use.

Set the headset mode to Voice Call or Ready Link and press

the Turbo Button (the operation button) on the headset to

activate useful functions.

Toconnecttheheadset:

ᮣ

Simply plug the headset into your phone’s headset jack.

Section 2B:ControllingYour Phone’s Settings

Tosetheadsetmode:

1. Press

to access the main menu.

2. Select Settings.

WXYZ

3. Select Others (

4. Select HeadsetMode.

5. Select TurboButton.

6. Select an option from the following.

Ⅲ

VoiceCalls: Press the Turbo Button to activate

Voice dial. Press twice to redial the last call. Press

and hold the button to activate the Voice Memo.

Ⅲ

ReadyLink: Press and hold the Turbo Button to

redial the last Ready Link call.

Ⅲ

Off: Turns this feature off.

Tosetthesoundmode:

1. From step 4 above, select Earpiece.

2. Select Stereo or Mono.

Tosettheringeraudio:

1. From step 4 above, select RingerAudio.

2. Select Normal or Discreet.

Note: Please make sure to insert the headset plug into the headset jack as

far as it goes. Improper connection of the headset plug can cause

abnormal sounds.

Note: When using the headset, DO NOT set the volume too high. Listening

at high volume for an extensive period of time may cause hearing loss.

Section 2B:ControllingYour Phone’s Settings

Section 2C

Setting Your Phone’s Security

In This Section

ࡗ

AccessingtheSecurityMenu

UsingYourPhone’sLockFeature

RestrictingCalls

UsingSpecialNumbers

ErasingtheContactsDirectory

ErasingAllDownloads

ResettingYourPicturesAccount

ResettingYourPhone

ResettingandLockingYourPhoneThroughSMS

SecurityFeaturesforSprintPCSVision

Byusingthesecuritysettingsonyourwirelessphone, you

receivepeaceofmindwithoutsacrificingflexibility. This

section will familiarize you with your phone’s security

settings. With several options available, you can

customize your phone to meet your personal needs.

Section 2C:SettingYour Phone’s Security

Accessing the Security Menu

All of your phone’s security settings are available through

the Security menu. You must enter your lock code to view

the Security menu.

ToaccesstheSecuritymenu:

1. Press

to access the main menu.

2. Select Settings.

TUV

3. Select Security (

4. Enter your lock code to display the Security menu.

Tip: If you can’t recall your lock code, try using the last four digits of your

wireless phone number or try 0000. If neither of these work, call Qwest

Wireless Repair at 1-888-879-0611.

UsingYour Phone’s Lock Feature

LockingYour Phone

When your phone is locked, you can only receive incoming

calls or make calls to 911 or special numbers. (See “Using

Special Numbers” on page 86.)

Tolockyourphone:

1. From the Security menu, select LockPhone (

ABC

2. Select LockNow (

). (To set your phone to lock the

DEF

next time it is turned on, select OnPower-up [

]).

3. Highlight FullLock or Excp. Incom.Calls.

Section 2C:SettingYour Phone’s Security

UnlockingYour Phone

Tounlockyourphone:

1. From standby mode, press Unlock (left softkey).

2. Enter your lock code.

Locking the Pictures andVideos Menu

With this feature, you must enter your lock code when you

access the Pictures and Videos menu.

TolockthePicturesmenu:

ABC

1. From the Security Menu, select LockPic&Video (

2. Select LockNow. (Select Unlocked to deactivate this

feature.)

Lock Services

With this feature, you can choose to restrict access to

Sprint PCS Vision services and incoming and outgoing

voice calls and Ready Link calls.

Toactivatelockservices:

PQRS

1. From the Security Menu, select Others (

JKL

2. Select LockServices (

3. Select VoiceCalls, PCSVision, or ReadyLink.

4. Select Locked. (Select Unlocked to deactivate this

feature.)

Section 2C:SettingYour Phone’s Security

Changing the Lock Code

Tochangeyourlockcode:

PQRS

1. From the Security Menu, select Others (

2. Select ChangeLock (

3. Enter a new lock code (“1234” for example).

4. Reenter the new code.

Calling in Lock Mode

You can place calls to 911 and to your special numbers

when in lock mode. (For information on special numbers,

see “Using Special Numbers” on page 86.)

Toplaceanoutgoingcallinlockmode:

ᮣ

To call an Emergency number or special number,

enter the phone number and press

Note: You cannot place calls to your special numbers in the voice call

locked state. See “Lock Services” on page 83 for details.

Section 2C:SettingYour Phone’s Security

Restricting Calls

There may be occasions when you want to limit the

numbers your phone can call or from which it can receive

calls. You can use the Restrict Calls setting to do just that.

(The Restrict Calls setting does not apply to 911 or Qwest

Wireless Repair.)

Torestrictcalls:

PQRS

1. From the Security Menu, select Others (

ABC

2. Select LimitUse (

3. Select OutgoingCalls or IncomingCalls.

4. Select your desired option and press

Ⅲ

AllowAll lets you make or receive all calls.

Ⅲ

PhoneBookOnly lets you make or receive calls to or

from Contacts entries, voicemail, or special

numbers only.

Ⅲ

Special#sOnly lets you make or receive calls to or

from three special numbers only. (See “Using

Special Numbers” on page 86.)

Note: Restricted incoming calls are forwarded to voicemail.

Section 2C:SettingYour Phone’s Security

Using Special Numbers

Special numbers are important numbers that you have

designated as being “always available.” You can receive calls

from special numbers even if your phone is locked.

You can save 3 special numbers in addition to your Contacts

entries (the same number may be in both directories).

Toaddorreplaceaspecialnumber:

PQRS

1. From the Security Menu, select Others (

DEF

2. Select Special#s (

3. Select an entry number.

4. Enter your desired phone number and press

– or –

Press Options (right softkey), highlight FromPh. Book or

Voicemail, and press

Note: Special numbers cannot be called in the voice call locked state.

Erasing the Contacts Directory

You can quickly and easily erase all of the contents of your

Contacts Directory.

Toeraseallthenamesandphonenumbersinyour

ContactsDirectory:

DEF

1. From the Security Menu, select ErasePh. Book (

2. Press OK (left softkey) to continue.

3. If you are certain you would like to erase all of your

Contacts entries, select Yes.

Section 2C:SettingYour Phone’s Security

ErasingAll Downloads

You can use your phone’s security menu to erase all items

you have downloaded to your phone.

Toerasealldownloads:

GHI

1. From the Security Menu, select EraseDownload (

2. Press OK (left softkey) to continue.

3. If you are certain that you would like to erase all items

downloaded to your phone, select Yes.

Ⅲ

If you have assigned downloaded data, the

function returns to its default setting.

ResettingYour PicturesAccount

This option resets your authentication ID for your

Sprint PCS Picture Mail account.

Toresetyourpicturesaccount:

JKL

1. From the Security Menu, select ResetPictures (

2. Press OK (left softkey) to continue.

3. If you are certain that you would like to reset your

pictures account, select Yes.

After resetting, you are prompted to reenter the password

when you use Online Pictures.

Note: Your account will be locked if you enter wrong password 10 times

after resetting your acount. In this case, please contact Qwest Wireless

Repair at 1-877-879-0611.

Section 2C:SettingYour Phone’s Security

ResettingYour Phone

Resetting the phone restores all the factory defaults,

including the ringer types and display settings. The Contacts,

Call History, Calendar, and Messaging are not affected.

Toresetyourphone:

MNO

1. From the Security Menu, select ResetPhone (

2. Press OK (left softkey) to continue.

3. If you are certain that you would like to restore all of

the factory settings, select Yes.

Section 2C:SettingYour Phone’s Security

Security Features for Sprint PCSVision

Enabling and Disabling Sprint PCSVision

Services

You can disable Sprint PCS Vision services without turning

off your phone; however, you will not have access to all

Sprint PCS Vision services, including Web and Email.

Disabling Sprint PCS Vision will avoid any charges

associated with Sprint PCS Vision services. While signed

out, you can still place or receive phone calls, check

voicemail, and use other voice services. You may enable

Sprint PCS Vision services again at any time.

TodisableSprintPCSVisionservices:

1. Press

to access the main menu.

2. Select Settings.

DEF

3. Select PCSVision (

4. Select DisableVision. (A message will appear.)

5. Press Disable (right softkey) to confirm that you want

to sign out.

ToenableSprintPCSVisionservices:

1. Press

to access the main menu.

2. Select Settings.

DEF

3. Select PCSVision (

4. Select EnableVision. (A message will appear.)

5. Press OK (left softkey) to enable Vision service.

Section 2C:SettingYour Phone’s Security

Section 2D

Controlling Your Roaming Experience

In This Section

ࡗ

UnderstandingRoaming

SettingYourPhone’sRoamMode

ControllingRoamingChargesUsingCallGuard

Roamingistheabilitytomakeorreceivecallswhenyou’reoff

thenetworkavailabletoyou. Your new dual band/tri-mode

SCP-8300 by Sanyo works anywhere on the network

available to you and allows you to roam on other analog

and 1900 and 800 MHz digital networks where we’ve

implemented roaming agreements with other carriers.

This section explains how roaming works as well as

special features that let you manage your roaming

experience.

Section 2D:ControllingYour Roaming Experience

Understanding Roaming

RecognizingtheRoamingIconontheDisplayScreen

Your phone’s display screen always lets you know when

you’re off the network available to you. Any time you are

roaming, the phone displays the roaming icon ( ). If you

are roaming on a digital system, the roaming icon will

display along with the text DigitalRoam, and on an analog

system, with the text AnalogRoam.

Tip: Remember, when you are using your phone off the network available

to you, always dial numbers using 11 digits (1 + area code + number).

Note: Unless your service plan includes roaming, you will pay a higher

per-minute rate for roaming calls.

RoamingonOtherDigitalNetworks

When you’re roaming on digital networks, your call quality

and security will be similar to the quality you receive when

making calls on the network available to you. However, you

may not be able to access certain features, such as Sprint

PCS Vision.

Note: Ready Link Service is not available in roaming areas.

Note: If you’re on a call when you leave the network available to you and

enter an area where roaming is available , your call is dropped. If your call

is dropped in an area where you think network service is available, turn

your phone off and on again to reconnect to the network available to you.

Section 2D:ControllingYour Roaming Experience

RoamingonAnalogNetworks

When you roam on analog networks, you will experience a

similar quality provided by other analog carriers today.

Although some features, such as Sprint PCS Vision, will be

unavailable, you can still make and receive calls and access

voicemail. If you are accustomed to network service, you

may notice some of the following differences when using

analog service:

ⅷ

You are more likely to experience static, cross-talk,

fade-out, and dropped calls.

ⅷ

Some features which are standard on the network

available to you, such as call waiting, Sprint PCS Vision,

Ready Link, and direct international dialing, are

unavailable.

ⅷ

Though callers can leave voicemail messages while you

are roaming, you will not receive notification until you

return to the network available to you. (See “Checking

for Voicemail Messages While Roaming” on page 94.)

ⅷ

There are security and privacy risks (eavesdropping and

cloning) that exist with conventional analog services

today.

ⅷ

Your battery’s charge will deplete more quickly and you

will need to recharge it more often when you use your

phone for analog roaming.

Note: When using your phone in analog mode, the phone may feel warm.

This is normal for analog operation.

Section 2D:ControllingYour Roaming Experience

CheckingforVoicemailMessagesWhileRoaming

When you are roaming off the network available to you, you

may not receive on-phone notification of new voicemail

messages. Callers can still leave messages, but you will need

to periodically check your voicemail for new messages if

you are in a roaming service area for an extended period of

time.

Tocheckyourvoicemailwhileroaming:

1. Dial 1+area code+your wireless phone number.

Shift

2. When you hear your voicemail greeting, press

3. Enter your passcode at the prompt and follow the

voice prompts.

When you return to the network available to you, voicemail

notification will resume as normal.

Section 2D:ControllingYour Roaming Experience

SettingYour Phone’s Roam Mode

Your wireless phone allows you to control your roaming

capabilities. By using the Roaming menu option, you can

determine which signals your phone accepts.

SetMode

Choose from three different settings on your dual- band/tri-

mode phone to control your roaming experience.

Tosetyourphone’sroammode:

1. Press

to access the main menu.

2. Select Settings.

3. Select Roaming (

4. Select SetMode.

MNO

5. Select an option from the following, and press

Ⅲ

QwestOnly allows you to access the enhanced

network available to you only and prevents

roaming on other networks.

Ⅲ

Automatic seeks network service. When service is

unavailable, the phone searches for an alternate

system.

Ⅲ

RoamingOnly forces the phone to seek a roaming

system. The previous setting (Qwest Only or

Automatic) is restored the next time the phone is

turned on.

Section 2D:ControllingYour Roaming Experience

Controlling Roaming Charges Using

Call Guard

Your phone has two ways of alerting you when you are

roaming off the network available to you: the onscreen

roaming icon and Call Guard. Call Guard makes it easy to

manage your roaming charges by requiring an extra step

before you can place or answer a roaming call. (This

additional step is not required when you make or receive

calls while on the network available to you.)

ToturnCallGuardonoroff:

1. Press

to access the main menu.

2. Select Settings.

3. Select Roaming (

4. Select CallGuard.

5. Select On or Off.

MNO

ToplaceroamingcallswithCallGuardon:

1. From standby mode, dial 1 + area code + the seven-

digit number. (You can also initiate a call from the

Contacts directory, Call History, or Messaging.)

2. Press

(or press Options [right softkey]

and highlight Call or Call:SpeakerOn).

3. Press to proceed while the pop-up message is

displayed.

– or –

Press any key to erase the pop-up message, press

Options (right softkey), highlight RoamCall, or

Roam:SpeakerOn, and press

Section 2D:ControllingYour Roaming Experience

ToanswerincomingroamingcallswithCallGuardon:

ᮣ

Press Options (right softkey), highlight Answer or

Answer:Speaker, and press

– or –

1. Press

2. Press

to proceed while the pop-up message is

displayed.

Reminder: If the Call Guard feature is set to On, you need to take extra

steps to make and receive roaming calls.

Section 2D:ControllingYour Roaming Experience

Section 2E

Navigating Through Menus

In This Section

ࡗ

MenuNavigation

MenuStructure

ViewingtheMenus

Everyfunctionandfeatureofyourwirelessphonecanbe

accessedthroughanonscreenmenu. This section is a road

map to using your SCP-8300 by Sanyo. Please take a few

moments to learn your way around and you’ll find your

phone easier to use.

Section 2E:NavigatingThrough Menus

Menu Navigation

The navigation key on your wireless phone allows you to

scroll through menus quickly and easily. The scroll bar at

the right of the menu keeps track of your position in the

menu at all times.

To navigate through a menu, simply press the navigation

key up or down.

Menu Structure

SelectingMenuItems

As you navigate through the menu, menu options are

highlighted. Select any numbered option by simply

pressing the corresponding number on the phone’s

keypad. You may also select any item by highlighting it and

pressing

Forexample,ifyouwanttoviewyourlastincomingcall:

1. Press to access the main menu.

2. Select CallHistory.

ABC

3. Select Incoming by pressing

or by highlighting it

and pressing . (If you have received any calls, they

are displayed on the screen.)

100

Section 2E:NavigatingThrough Menus

BackingUpWithinaMenu

Togotothepreviousmenu:

ᮣ

Press

Toreturntostandbymode:

ᮣ

Press

Shortcuts

Use your navigation key to quickly access your phone’s

menus.

ⅷ

Right to take a shortcut to the Contacts menu.

ⅷ

Left to take a shortcut to the MyShortcut menu.

(See page 74 for setting.)

ⅷ

Up to take a shortcut to the Messaging menu.

ⅷ

Down to take a shortcut to the Downloads menu.

Section 2E:NavigatingThrough Menus

101

Viewing the Menus

MenuDiagram

The following list outlines your phone’s menu structure.

1. Call History

1. Outgoing

2. Incoming

3. Missed

4. Erase History

2. Contacts

1. Find/Add Entry

2. Speed Dial #s

3. My Phone#

4. Services

3. Messaging

1. Send Message

2. PictureMail

3. Text Msgs

4. Instant Msg.

5. Voicemail

4. Web

5. Picture&Video

1. Camera

2. Camcorder

3. My Pictures

4. My Videos

5. Online Albums

6. Prints by Mail

7. Settings & Info

8. Wap Link 1-3 (If applicable)

102

Section 2E:NavigatingThrough Menus

6. Downloads

1. Games

2. Ringers

3. Screen Savers

4. Applications

5. Dynamic 1-11 (If applicable)

6. Others (If applicable)

7. Media Player

8. Settings

1. Sounds

1. Ringer/Key Vol.

2. Ringer Type

3. Alerts

4. Receiver Vol.

5. Application Vol.

6. Others

2. Display

1. Backlight

2. Greeting

3. Font Size

4. Background

5. Animation

6. Incoming Calls

7. Match Area Code

8. Standby Display

9. Main Menu

10. My Buddy

11. Return to Idle

12. Sleep Mode

3. PCS Vision

1. Enable (or Disable) Vision

2. Net Guard

3. Update Profile

Section 2E:NavigatingThrough Menus

103

4. Ready Link

1. Enable/Disable

2. List Update

3. Sounds

4. Speakerphone

5. Default View

6. Floor Display

7. R-Link Guard

8. Restart

9. Help

5. Location

6. Roaming

1. Set Mode

2. Call Guard

7. Messaging

1. Notification

2. Preset Msgs

3. Send Callback#

4. Signature

8. Security

1. Lock Phone

2. Lock Pic&Video

3. Erase Ph. Book

4. Erase Download

5. Reset Pictures

6. Reset Phone

7. Others

104

Section 2E:NavigatingThrough Menus

9. Others

1. Airplane Mode

2. Text Entry

3. Any Key Answer

4. Auto Answer

5. Open/Close Flip

6. Abbrev. Dial

7. Headset Mode

8. TTY

9. Side Key Guard

10. Language

0. Phone Info

1. Phone#/User ID

2. Help

3. Version

4. Advanced

9. Tools/Extras

1. Voice Services

1. Voice Memo

2. Screen Call

3. Voice Dial

2. Calendar

3. Alarm Clock

4. Calculator

5. Stop Watch

6. World Clock

7. PC Sync

1. Ringers

2. Images

3. Erase Data

8. Update Phone

Section 2E:NavigatingThrough Menus

105

106

Section 2F

Managing Call History

In This Section

ࡗ

ViewingHistory

CallHistoryOptions

MakingaCallFromCallHistory

SavingaPhoneNumberFromCallHistory

PrependingaPhoneNumberFromCallHistory

ErasingCallHistory

TheCallHistorykeepstrackofincomingcalls, callsmadefrom

yourwirelessphone, andmissedcalls. This section guides

you through accessing and making the most of your Call

History.

Section 2F:Managing Call History

107

Viewing History

You’ll find the Call History feature very helpful. It is a list of

the last 20 voice calls and the last 10 Ready Link calls for

calls you placed, accepted, or missed. Call History makes

redialing a number fast and easy. It is continually updated as

new numbers are added to the beginning of the list and the

oldest entries are removed from the bottom of the list.

Each entry contains the phone number (if it is available)

and Contact’s name (if the phone number is in your

Contacts List). Duplicate calls (same number and type of

call) may only appear once on the list (except missed calls).

ToviewaCallHistoryentry:

1. Press

to access the main menu.

2. Select CallHistory.

ABC

3. Select Outgoing (

), Incoming (

), or

DEF

Missed (

4. Select the entry you wish to view.

Tip: You can switch the voice call history to the Ready Link call history by

pressing R-Link (left softkey). To return to the voice call history, press

Voice Call (left softkey). This option is not available when Ready Link mode

is set to Disable (see page 202), or Ready Link is locked (see page 83).

108

Section 2F:Managing Call History

Call History Options

For additional information and options on a particular call,

highlight a Call History entry and press . This feature

displays the date and time of the call, the phone number (if

available), and the caller’s name (if the number is already in

your Contacts List). By pressing Options (right softkey), you

can select from the following options:

ⅷ

Call to dial the phone number.

ⅷ

Call:SpeakerOn to dial the phone number in

speakerphone mode.

ⅷ

SendMessage to send a text message, picture, or video.

(To send a text message, see “Composing SMS Text

Messages” on page 250. To send a picture or video, see

“Sending Sprint PCS Picture Mail” on page 186.)

ⅷ

SavePhone# to save the phone number (if applicable).

Ⅲ

GotoPhoneBook appears when the number is

already in your Contacts list. (See “Saving a Phone

Number From Call History” on page 111.)

ⅷ

Prepend to add numbers to the beginning of the phone

number. (See “Prepending a Phone Number From Call

History” on page 112.)

ⅷ

CopytoPersonal to copy the phone number to the

Ready Link Personal List (if applicable).

ⅷ

Erase to erase the entry.

Section 2F:Managing Call History

109

Making a Call From Call History

ToplaceacallfromCallHistory:

1. Press

to access the main menu.

2. Select CallHistory.

ABC

3. Select Outgoing (

), Incoming (

), or

DEF

Missed (

4. Scroll to the entry you want to call.

5. Press

– or –

Press Options (right softkey), highlight Call or

Call:SpeakerOn, and press

Note: You cannot make calls from Call History to entries identified as No ID

or Restricted.

110

Section 2F:Managing Call History

SavingaPhoneNumberFromCallHistory

Your SCP-8300 can store up to 500 phone numbers in up to

300 Contacts entries (an entry may contain up to seven

numbers). Each entry’s name can contain sixteen

characters.

TosaveaphonenumberfromCallHistory:

1. Press

to access the main menu.

2. Select CallHistory.

ABC

3. Select Outgoing (

), Incoming (

), or

DEF

Missed (

4. Scroll to a call history entry and press Options (right

softkey).

5. Highlight SavePhone# and press

6. Select the appropriate label.

7. Enter a name and press

Once you have stored an entry in the Contacts list,

you are prompted to select the following entry mode:

Ⅲ

NewName to enter a name directly.

Ⅲ

FromPh. Book to select a name from the Contacts

list.

8. Press Save (left softkey).

Note: You cannot save phone numbers already in your Contacts list or

from calls identified as No ID or Restricted. If the selected entry has

already been stored in the Contacts list, Go to Phone Book appears during

step 5 above.

Section 2F:Managing Call History

111

Prepending a Phone Number From Call

History

If you need to place a call from Call History and you happen

to be outside your local area code, you can add the

appropriate prefix by prepending the number.

ToprependaphonenumberfromCallHistory:

1. Press

to access the main menu.

2. Select CallHistory.

ABC

3. Select Outgoing (

), Incoming (

), or

DEF

Missed (

4. Scroll to a call history entry and press Options (right

softkey).

5. Highlight Prepend and press

6. Enter the digits you want to add to the number.

7. Press or to place a call.

To select another option, press Options (right softkey),

highlight it and press

ⅷ

Call to dial the phone number.

ⅷ

Call:SpeakerOn to dial the phone number in

speakerphone mode.

SavePhone# to store the phone number in your

Contacts directory.

ⅷ

HardPause to insert a hard pause.

2-Sec. Pause to insert a 2-second pause.

112

Section 2F:Managing Call History

Erasing Call History

To erase individual Call History entries, see “Call History

Options” on page 109.

ToeraseCallHistory:

1. Press

to access the main menu.

2. Select CallHistory.

GHI

3. Select EraseHistory (

ABC

DEF

4. Select Outgoing (

), Incoming (

), Missed (

GHI

or All (

5. Highlight VoiceCalls or ReadyLink and press

Ⅲ

VoiceCalls to erase call history for voice calls.

Ⅲ

ReadyLink to erase call history for Ready Link calls.

6. Select Yes.

Section 2F:Managing Call History

113

114

Section 2G

Using the Contacts Directory

In This Section

ࡗ

DisplayingtheContactsList

AddingaNewContactsEntry

FindingContactsListEntries

ContactsListEntryOptions

AddingaPhoneNumbertoaContactsEntry

EditingaContactsEntry

ErasingaContactsEntryFromtheList

AssigningSpeedDialNumbers

AssigninganImagetoaContactsEntry

SelectingaRingerforan Entry

SecretContactsEntries

Nowthatyouknowthebasicsthatmakeiteasiertostayin

touchwithpeopleandinformation, you’rereadytoexplore

yourphone’smoreadvancedfeatures. This section explains

how to use your phone’s Contacts Directory and helps you

make the most of your contacts and time when you are

trying to connect with the important people in your life.

Section 2G:Using the Contacts Directory

115

Displaying the Contacts List

Todisplayyourcontactslist:

ᮣ

Press the navigation key right.

– or –

1. Press

to access the main menu.

2. Select Contacts.

3. Select Find/AddEntry (

Adding a New Contacts Entry

Your phone can store up to 500 phone numbers in up to

300 Contacts entries (an entry may contain up to seven

numbers). Each entry’s name can contain sixteen

characters.

Toaddanewentry:

1. Press the navigation key right to display the

Contacts list.

2. Highlight <AddContact> and press

3. Enter a name and press

4. Select the appropriate label (Mobile, Home, Work,

Pager, Fax, Other, NoLabel, Email, or Web), enter the

phone number or address and press

5. Press Save (left softkey).

116

Section 2G:Using the Contacts Directory

Finding Contacts List Entries

There are several ways to display your Contacts entries: by

name, by speed dial number, by Ready Link List, and by

voice tags. Follow the steps outlined in the sections below

to display entries from the Contacts list menu.

FindingNames

TofindContactslistentriesbyname:

1. Press the navigation key right to display the

Contacts list.

2. Scroll through all the entries using your navigation key.

– or –

Enter the first letter of the name or part of the name.

(The display shows the entries beginning with the

letter entered.)

3. To display the entry’s details, select your desired entry

and press

4. To make the call, press

, or Call (left softkey).

Section 2G:Using the Contacts Directory

117

TofindReadyLinkListentries:

1. Press the navigation key right to display your

Contacts list.

2. Press Goto (left softkey). Highlight your desired list

and press

Ⅲ

PhoneBook to display the Contacts list.

PersonalList to display the Personal List.

PersonalGrps. to display the Personal Group List.

Ⅲ

3. Scroll through the list to select your desired entry.

Note: The Go to (left softkey) option does not appear when Ready Link

mode is set to Disable (see page 202), or Ready Link is locked (see

page 83).

118

Section 2G:Using the Contacts Directory

FindingSpeedDialNumbers

Tofindphonenumbersyouhavestoredinspeeddial

locations:

1. Press

to access the main menu.

2. Select Contacts.

ABC

3. Select SpeedDial#s (

). (The Speed Dial numbers

list appears.)

FindingVoiceTags

To find Voice Tags in your phone:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

DEF

4. Select VoiceDial (

ABC

DEF

5. Select Review (

) or Rev:Speaker (

(The Voice Dial tags list appears.)

Section 2G:Using the Contacts Directory

119

Contacts List Entry Options

To access a contact’s options, display the Contacts list,

highlight an entry and press . Then select a phone

number and press Options (right softkey). To select an

option, highlight it and press

ⅷ

Edit to edit the selected entry.

ⅷ

Call to dial the selected number.

Call:SpeakerOn to dial the phone number in

speakerphone mode.

ⅷ

SendMessage to send a text message, picture, or video

(mobile numbers only). (See page 249 and 186 for

details.)

ⅷ

CallAlarm to set a call alarm for the entry. (See page 131

for Call Alarm.)

SetSpeedDial to assign speed dial numbers to your

favorite entries. (See “Assigning Speed Dial Numbers”

on page 123.)

ⅷ

SetVoiceDial to set a voice dial for the entry. (See

page 146 for Voice Dial.)

Prepend to alter a phone number by adding numbers to

the beginning of the entry. (See “Prepending a Phone

Number From Call History” on page 112.)

ⅷ

CopytoPersonal to copy the phone number to your

Ready Link Personal List (if available).

120

Section 2G:Using the Contacts Directory

Adding a Phone Number to a

Contacts Entry

Toaddaphonenumbertoanentry:

1. Press the navigation key right to display the

Contacts list.

2. Scroll to the entry you wish to add and press

3. Select a phone number, press Options (right softkey),

highlight Edit, and press

4. Select the label field you want to add.

5. Enter the number and press

6. Press Save (left softkey).

Section 2G:Using the Contacts Directory

121

Editing a Contacts Entry

Tomakechangestoanentry:

1. Press the navigation key right.

2. Scroll to the entry you wish to edit and press

3. Select a phone number, press Options (right softkey),

highlight Edit, and press

– or –

Select an email address or Web address and press Edit

(right softkey).

4. Select the field you want to edit.

5. Edit the entry by using your keypad and press

6. Press Save (left softkey) to save your changes.

Erasing a Contacts Entry From the List

Toerasetheselectedentry:

1. Press the navigation key right.

2. Scroll to the entry you wish to delete by using the

navigation key and press Options (right softkey).

3. Highlight EraseContact and press

4. Select Yes.

122

Section 2G:Using the Contacts Directory

Assigning Speed Dial Numbers

With this feature you can dial Contacts Directory entries

with one key press for locations 2-9. For details on how to

make calls using speed dial numbers, see “Using Speed

Dialing” on page 39.

ToassignSpeedDial:

1. Press

to access the main menu.

2. Select Contacts.

ABC

3. Select SpeedDial#s (

4. Select an available speed dial location.

5. Select an entry from the list.

6. Select the phone number you want to set as a speed dial.

– or –

1. Press the navigation key right.

2. Scroll to your desired entry in the Contacts list and

press

3. Select the phone number you want to set as a speed

dial and press Options (right softkey).

4. Highlight SetSpeedDial and press

5. Select an available speed dial location.

Note: If you attempt to assign an already in-use speed dial location to a

new phone number, a dialog will appear asking if you wish to overwrite the

existing speed dial assignment. Select Yes to assign the location to the

new phone number or No to cancel. To delete the previous speed dial

assignment, select Reset.

Section 2G:Using the Contacts Directory

123

Assigning an Image to a Contacts Entry

You can assign an image to a Contacts entry. The image is

displayed when the entry calls you.

Toassignanimageforanentry:

1. Press the navigation key right.

2. Select the entry for which you want to assign the

image and press

3. Press Options (right softkey), highlight Edit, and

press or if you are selecting email/web address,

press Edit (right softkey).

4. Scroll down to the box under PictureID and press

5. Select your desired option and press OK (left softkey)

to assign.

6. Press Save (left softkey) to save the image type.

124

Section 2G:Using the Contacts Directory

Selecting a Ringer for an Entry

You can assign a ringer type to a Contacts entry so you can

identify the caller by the ringer type. (See “Ringer Types”

on page 48.)

Toselectaringertypeforanentry:

1. Press the navigation key right.

2. Select the entry for which you want to set the

incoming ringer and press

3. Press Options (right softkey), highlight Edit, and

press or if you are selecting email/web address,

press Edit (right softkey).

4. Scroll down to the box under Ringer and press

5. Scroll to your desired ringer and press . (When you

highlight a ringer type, a sample ringer will sound.)

6. Press Save (left softkey) to save the ringer type.

Note: If you set an animation ringer (indicated with the icon) and an

image, your phone plays the ringer (audio) of the animation ringer and

displays the image you selected.

Section 2G:Using the Contacts Directory

125

Secret Contacts Entries

You can hide an entry’s phone number(s) and require your

lock code to edit the entry by making it secret. The entry

name is still displayed, but the entry’s phone numbers are

replaced with “<Secret>”.

Tomakeanentrysecret:

1. Press the navigation key right.

2. Scroll to the Contacts entry you want to tag as secret.

3. Press Options (right softkey) to display the menu

options.

4. Highlight SetSecret and press

5. Enter the 4-digit lock code.

6. Select On.

Tomakeanentrypublic:

1. Press the navigation key right.

2. Scroll to the Contacts entry you want to tag as public.

3. Press Options (right softkey) to display the menu

options.

4. Highlight SetSecret and press

5. Enter the 4-digit lock code.

6. Select Off.

Tip: If you can’t recall your lock code, try using the last four digits of your

wireless phone number or try 0000. If neither of these work, call Qwest

Wireless Repair at 1-888-879-0611.

126

Section 2G:Using the Contacts Directory

Section 2H

Using the Phone’s Calendar

and Tools

In This Section

ࡗ

UsingYourPhone’sCalendar

PersonalInformationManagement

UsingYourPhone’sTools

Yourwirelessphoneisequippedwithseveralpersonal

informationmanagementfeaturesthathelpyoumanageyour

busylifestyle. This section shows you how to use these

features to turn your phone into a time management

planner that helps you keep up with your contacts,

schedules, and commitments. It takes productivity to a

whole new level.

Section 2H:Using the Phone’s Calendar andTools

127

UsingYour Phone’s Calendar

DisplayingYour Calendar

Todisplayyourcalendar:

1. Press

to access the main menu.

2. Select Tools/Extras.

ABC

3. Select Calendar (

Adding an Event to the Calendar

Your Calendar helps organize your time and reminds you of

important events (up to 100 events).

Toaddanevent:

1. From the Calendar display (see above), select the day

you want to add an event and press Options (right

softkey).

2. Highlight AddEvent and press

3. Select Schedule ( ).

4. Enter the description using your keypad and press

(or press Mode [right softkey] to select a description

from “From To Do List”).

Note: The “From To Do List “option will not appear if there are no items

stored in the To Do List. See “Adding To Do List Items” on page 134 for

details.

128

Section 2H:Using the Phone’s Calendar andTools

5. Select the following items.

Ⅲ

Description to enter a description of your event (up

to 14 characters).

Ⅲ

From to schedule the start time.

To to schedule the end time.

Location to edit the location of your event (up to 14

characters).

Ⅲ

Alarm to select your desired ringer.

AlarmTime to edit the alarm time (number of hours

or minutes before the event starts). Default alarm

time is 10 minutes before.

Ⅲ

Repeat to set the event’s repeating status. Select

None, Daily, Weekly, Monthly, or Yearly.

6. Press Save (left softkey) to schedule the event.

ᮣ

Tip: The date you have scheduled events for is indicated by “ ”.

Tip: Press the navigation key up or down to scroll by week through the

Calendar and the Side Volume key to scroll by month.

Section 2H:Using the Phone’s Calendar andTools

129

EventAlerts

There are several ways your phone alerts you of scheduled

events:

ⅷ

By playing the alert tone (depending on the Ringer Type

and Ringer Volume setting).

ⅷ

By blinking the LED.

ⅷ

By displaying the event’s description on the Main LCD

or Sub LCD.

ⅷ

By lighting the LCD backlight (depending on the

backlight setting).

EventAlert Menu

When you have an event alarm scheduled, your phone

alerts you and displays the

Tosilenceaneventalert:

ᮣ

icon and the event summary.

Press any key to silence an event alert. (The alarm will

snooze again after 10 minutes.)

Otheroptionsavailableinclude:

ⅷ

Press and hold the side camera key to cancel snoozing.

ⅷ

Press Dismiss (right softkey) to dismiss the event.

Note: If you press any key before checking your event, Events (right

softkey) appears in standby mode. Press Events (right softkey) to display

the event and press

to see the event details. To cancel snoozing, press

Dismiss (right softkey) while the event list is displayed.

130

Section 2H:Using the Phone’s Calendar andTools

Adding a CallAlarm to the Calendar

You can set call alarms to notify you when you need to

place a call. The call alarm will let you know when and to

whom to place a scheduled call. You can set up to 15 call

alarms.

Toaddacallalarmtothecalendar:

1. From the Calendar display (see page 128), select the

day you want to add an event and press Options (right

softkey).

2. Highlight AddEvent and press

ABC

3. Select CallAlarm (

4. Enter the phone number directly or press Options

(right softkey) for options.

Ⅲ

FromPh. Book to select the desired number from

your Contacts list.

Ⅲ

Voicemail to select the number for voicemail

access.

5. Select the following items.

Ⅲ

Time/Date to edit the start time and date.

Ⅲ

Alarm to select the ringer alarm.

Ⅲ

Repeat to set the Call Alarm’s repeat status. Select

None, Daily, Weekly, Monthly, or Yearly.

6. Press Save (left softkey).

Section 2H:Using the Phone’s Calendar andTools

131

CallAlarmAlerts

There are several ways your phone alerts you of a scheduled

call alarm:

ⅷ

By playing the alert tone (depending on the Ringer Type

and Ringer Volume setting).

ⅷ

By blinking the LED.

ⅷ

By displaying the call alarm notification on the Main

LCD or Sub LCD.

ⅷ

By lighting the LCD backlight (depending on the

backlight setting).

CallAlarm Menu

When you have scheduled a call alarm, your phone alerts

you and displays the

icon and the name or phone

number you wish to call.

Torespondtoacallalarm:

ᮣ

Press

to dial the phone number.

Other options available include:

ⅷ

Press

to make a Ready Link call (if applicable).

ⅷ

Press any key (except

while the phone is

closed) to repeat the alarm in 10 minutes.

ⅷ

Press and hold the side camera key to cancel snoozing.

Press Dismiss (right softkey) to dismiss the call alarm.

132

Section 2H:Using the Phone’s Calendar andTools

Editing an Event or CallAlarm

Toeditaneventorcallalarm:

1. From the Calendar display (see page 128), select the

date for which you set events and press

2. Select one of the events or call alarms. (The event or

call alarm details appear.)

3. Select the information you want to edit.

4. Enter or select a new setting and press

5. Press Save (left softkey).

Viewing a Future or Past Day’s Scheduled

Events

Toviewafutureorpastday’sscheduledevents:

1. From the Calendar display (see page 128), press

Options (right softkey).

2. Highlight GoToDate and press

3. Enter the date by using numeric keys and the

navigation key and press OK (left softkey).

4. Press

once again to view the day’s event list.

Section 2H:Using the Phone’s Calendar andTools

133

Erasing an Event or CallAlarm

Toeraseascheduledeventorcallalarm:

1. From the Calendar display (see page 128), select the

date for which you set events and press

2. Select one of the events or call alarms and press

Options (right softkey).

3. Highlight EraseEvent and press

4. Select Yes.

Adding To Do List Items

Your phone can store and manage up to 20 To Do List items.

ToaddanitemtoyourToDoList:

1. From the Calendar display (see page 128), press

Options (right softkey).

2. Highlight ToDoList and press

3. Press Options (right softkey).

4. Highlight AddItem and press

5. Enter the description (up to 14 characters) and

press

6. Select Priority and edit the To Do’s priority. You can

select from Normal, Urgent, or Done.

7. Press Save (left softkey).

134

Section 2H:Using the Phone’s Calendar andTools

Adding aTo Do List Item to the Calendar

ToaddyourToDoListitemtothecalendar:

1. From the To Do List display (see page 134), select the

item you want to add to the schedule and press

Options (right softkey).

2. Highlight AddToSchedule and press

Ⅲ

AddToSchedule to extract the item from the To Do

List and make it a scheduled event.

3. Enter the description using your keypad and press

(See “Adding an Event to the Calendar” on page 128

for entering.)

4. Press Save (left softkey).

Note: If you have saved a To Do List item to the calendar, deleting it from

the To Do List will not delete it from the calendar. To remove an item saved

to the calendar, see “Erasing an Event or Call Alarm” on page 134.

Section 2H:Using the Phone’s Calendar andTools

135

Viewing Memory inYour Calendar

Toviewavailablememoryspaceandoptions:

1. From the Calendar display (see page 128), press

Options (right softkey).

2. Highlight ViewMemory and press

ABC

3. Select Schedule (

), CallAlarm (

), or

DEF

ToDoList (

). (The available memory space and

options display.)

For further options:

4. Press Options (right softkey).

5. Highlight an option and press

Ⅲ

EraseOld deletes old events or call alarms.

Ⅲ

EraseSelection deletes the To Do List items you

selected.

EraseDone deletes the To Do List items that have

been completed.

EraseAll deletes all events, call alarms, or To Do

List items.

6. Select Yes or No.

136

Section 2H:Using the Phone’s Calendar andTools

PurgingAll Events,CallAlarms,orTo Do List

Items

Todeleteallscheduledevents,callalarms,orToDoList

items:

1. From the Calendar display (see page 128), press

Options (right softkey).

2. Highlight EraseMemory and press

3. Select one item from the options.

Ⅲ

EraseOld (

) deletes old events, call alarms,

and To Do List items that are done.

ABC

Ⅲ

EraseAll (

) deletes all events, call alarms,

and To Do List items.

4. Select Yes.

Section 2H:Using the Phone’s Calendar andTools

137

Personal Information Management

DisplayingYour UserAddress

Todisplaythephone’scurrentuseraddress:

1. Press

to access the main menu.

2. Select Settings.

3. Select PhoneInfo (

4. Select Phone#/UserID (

Ⅲ

If you sign out, <PCSVisionDisabled> appears on

the display.

Finding Icon Definitions

Toviewanexplanationoficonsthatappearonthedisplay:

1. Press to access the main menu.

2. Select Settings.

3. Select PhoneInfo (

ABC

4. Select Help (

5. Select the item for which you want to see the

explanation and press . (The icon’s explanation

appears.)

138

Section 2H:Using the Phone’s Calendar andTools

Displaying theVersion Information

Todisplaytheversionnumberofthesoftware,hardware,

PRL(PreferredRoamingList),PRI(ProductRelease

Instructions),etc.,installedonyourphone:

1. Press

to access the main menu.

2. Select Settings.

3. Select PhoneInfo (

DEF

4. Select Version (

DisplayingAdvanced Information

Todisplayadvancedinformationsuchastechnologyand

frequency:

1. Press

to access the main menu.

2. Select Settings.

3. Select PhoneInfo (

4. Select Advanced (

GHI

Section 2H:Using the Phone’s Calendar andTools

139

UsingYour Phone’sTools

In addition to helping you be more efficient and organized,

your wireless phone offers useful and entertaining tools.

Using the Alarm Clock

Your phone comes with a built-in alarm clock with alarm

capabilities. You can set up to 5 alarms. This feature is also

available while your phone is turned off.

Tousethealarmclock:

1. Press

to access the main menu.

2. Select Tools/Extras.

DEF

3. Select AlarmClock (

Ⅲ

Press Settings (right softkey) to set the

RingerLength or SnoozeInterval.

4. Select an unassigned number and the following items.

Ⅲ

Alarm to set the alarm On or Off.

Ⅲ

Time to enter the alarm time. Enter the desired

alarm time and press

Ⅲ

Repeat to select the alarm frequency. Select Once,

Daily, Weekday, or your desired day of the week.

Ⅲ

Description to enter a description of the alarm.

5. Press Save (left softkey) to save the alarm settings.

Note: In a no-service area or an analog service area, it’s necessary to set

the actual time and date to use the Alarm Clock function after removing

and installing your battery.

140

Section 2H:Using the Phone’s Calendar andTools

Tostopthealarm:

ᮣ

Pressanykeyto stopthealarm. (Thealarmwill“snooze”

andthensoundagainaftertheselected snoozeinterval.)

Ⅲ

Press and hold the side camera key to cancel

snoozing.

Ⅲ

Press Dismiss (right softkey) to dismiss the alarm.

UpdatingYour Phone

Your SCP-8300 by Sanyo allows you to update its software

version over the air. You will be notified if a new software

version is available for your phone. You can also check if an

update is available through the Tools/Extras menu.

Toupdateyourphone:

1. Press Yes (left softkey) when an update notification

appears.

2. Read the information screen and press Next (left

softkey) to continue.

3. Select UpdatePhone to update your phone’s software.

ToupdateyourphonethroughtheTools/Extrasmenu:

1. Press

to access the main menu.

2. Select Tools/Extras.

TUV

3. Select UpdatePhone (

4. If a new software version is available, press Yes (left

softkey) to continue.

5. Read the information screen and press Next (left

softkey) to continue.

6. Select UpdatePhone to update your phone’s software

version.

Section 2H:Using the Phone’s Calendar andTools

141

Using the StopWatch

Tostartthestopwatch:

1. Press

to access the main menu.

2. Select Tools/Extras.

JKL

3. Select StopWatch (

Ⅲ

Press Start (left softkey) to start the stop watch

operation.

Ⅲ

Press Stop (left softkey) to stop the stop watch

operation.

Press Resume (left softkey) to start the stop watch

operation again.

Torecordalaptimewhilethestopwatchisrunning:

Ⅲ

Press Lap (right softkey) to record time of first lap.

Ⅲ

Press Lap (right softkey) again to record next lap.

(You may continue this until lap 5.)

Todisplaythestopwatchoptions:

1. During stop watch operation, press Options (right

softkey).

2. To select an option, highlight it and press

Ⅲ

GotoLapList to display a Lap List. Press Detail (left

softkey) to display the lap list detail or press

Options (right softkey) for the further options.

Ⅲ

EditTitle to edit the current lap list’s title.

Ⅲ

EraseThis to erase an individual Lap List.

Ⅲ

EraseAll to erase all existing Lap Lists.

Ⅲ

SavetoLapList to save the recorded lap times.

Reset to reset the time to zero and clear any

recorded lap times.

142

Section 2H:Using the Phone’s Calendar andTools

Using the Calculator

Your phone comes with a built-in calculator.

Tousethecalculator:

1. Press

to access the main menu.

2. Select Tools/Extras.

GHI

3. Select Calculator (

4. Enter numbers using your keypad. (Press the left

softkey to insert a decimal point.)

5. Press the appropriate navigation key for an arithmetic

option (Up for addition, Down for subtraction,

Left for multiplication, Right for division).

6. Enter numbers and press

for the result.

Ⅲ

To clear the numbers, press CLR (right softkey).

Using the World Clock

This feature is available only in digital service areas.

Tosettheworldclockdisplay:

1. Press

to access the main menu.

2. Select Tools/Extras.

MNO

3. Select WorldClock (

4. The world clock display appears.

Ⅲ

Press the navigation key right or left to change

countries.

Tip: Press Summer (left softkey) or Standard (right softkey) to select

between daylight savings and standard time (if applicable). The

shown in summer mode.

icon is

Section 2H:Using the Phone’s Calendar andTools

143

144

Section 2I

Using Your Phone’s Voice Services

In This Section

ࡗ

UsingVoice-ActivatedDialing

ManagingVoiceMemos

SettingUpScreenCall

Yourphone’sVoiceServicesletyouplacecallsusingyour

voice, storevoicereminders, andrecordmemosrightonyour

phone. This section includes easy-to-follow instructions

on using voice-activated dialing and managing voice

memos.

Section 2I:UsingYour Phone’sVoice Services

145

Using Voice-Activated Dialing

Your SCP-8300 lets you use a voice dial tag to automatically

dial a phone number in your Contacts List. (A voice dial tag

is a command you record and use to place calls without

using the keypad.) Your phone can store up to 30 voice

dial tags.

Making a Call UsingVoice-Activated Dialing

Touseavoicedialtagtocallaphonenumber:

1. Press

2. Follow the voice prompts and recite the entry’s voice

dial tag into your phone’s microphone.

Tip: Record voice dial tags in a quiet environment and without the aid of an

accessory (for example, a headset or hands-free car kit).

Tip: You can also make a call using voice activated dialing with the flip

closed. Press and hold the Side Call key (

), and follow the voice prompts.

ProgrammingVoice DialTags

Toprogramavoicedialtag:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

DEF

4. Select VoiceDial(

5. Select Program(

6. After you are prompted to say the name you wish to

program, wait for the beep and then say the name into

your phone’s microphone.

146

Section 2I:UsingYour Phone’sVoice Services

7. Respond to the prompt by repeating the name after

the beep.

8. Enter or highlight the Voice Dial entry (name) in the

Contacts List and press

9. Select the number you want to assign to the voice dial

tag (Home, Work, Mobile, etc.) and press

ReviewingVoice DialTags

Toreviewvoicedialtags:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

DEF

4. Select VoiceDial(

) or Rev:Speaker(

ABC

DEF

5. Select Review(

6. Highlight the voice dial entry you want to review and

press

to play it.

– or –

Highlight the desired voice dial entry and press

Options (right softkey). (To select an option, highlight

it and press .)

Ⅲ

Play to play the selected voice dial tag.

Ⅲ

SpeakerOn to play the tag in speakerphone mode.

(If your phone is in speakerphone mode, the

option will appear as SpeakerOff.)

Ⅲ

Erase to erase the voice dial tag. Select Yes to erase;

select No to cancel.

Section 2I:UsingYour Phone’sVoice Services

147

ErasingAllVoice DialTags

Toeraseallvoicedialtags:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

DEF

4. Select VoiceDial(

GHI

5. Select EraseAll(

6. Select Yes to erase all recorded voice dial tags; select

No to cancel.

148

Section 2I:UsingYour Phone’sVoice Services

Managing Voice Memos

You can use your phone’s Voice Services to record brief

memos to remind you of important events, phone numbers,

or grocery list items.

RecordingVoice Memos

Torecordavoicememo:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

4. Select VoiceMemo (

5. Select Record (

6. Start recording after the beep.

Tip: Youcanalsopressandhold

torecordavoicememoinstandbymode.

Toendtherecordingofyourmemo:

ᮣ

Press

, or

Torecordtheotherparty’svoiceduringaphonecall:

1. During a call, press Options (right softkey).

2. Select Tools/Extras.

3. Select VoiceServices (

4. Select VoiceMemo (

5. Select Record (

6. Start recording after the beep.

Toendtherecordingandtheconversation:

ᮣ

Press

Note: Your phone can store a total of 72 seconds of memos.

Section 2I:UsingYour Phone’sVoice Services

149

ReviewingVoice Memos

Toplaythevoicememosyouhaverecorded:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

4. Select VoiceMemo (

5. Select Play or Play:Speaker.

6. Select the memo you want to play.

– or –

Select All to play all memos continuously.

Ⅲ

Press Slow (left softkey) or Fast (right softkey) to

change the playing speed.

Ⅲ

To play the newer/older memo, press the

navigation key right or left.

ErasingVoice Memos

Toeraseallvoicememos:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

4. Select VoiceMemo (

JKL

5. Select EraseAll (

6. Select Yes.

Tip: To erase individual memos, select Play or Play:Speaker during step 5

above, and then select the memo you want to erase, press Options (right

softkey), and select Erase.

150

Section 2I:UsingYour Phone’sVoice Services

Setting Up Screen Call

This feature enables you to screen incoming calls by using a

recorded announcement, either one that is pre-recorded or

one that you record.

Activating Screen Call

TostartScreenCallwhenyouhaveincomingcalls:

1. When the phone rings or vibrates, press Options (right

softkey) to display the options.

2. Highlight ScreenCall and press

TosetAutoScreenCall:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Auto.

6. Select On.

7. Set the answering time by using numeric keys or by

pressing the navigation key up or down.

8. Press . (The icon is displayed on the standby

display.)

Tip: If a new caller’s message is waiting, the icon appears on the display.

The memos recorded while activating “Screen Call” are shown with

the or icon in the Voice Memo list ( : once played, : not played yet).

To listen to the message, see “Reviewing Voice Memos” on page 150.

Tip: While the caller’s message is being recorded, press

to answer

the call, or press to stop recording and disconnect the call.

Section 2I:UsingYour Phone’sVoice Services

151

Selecting anAnnouncement for Screen Call

ToselectaScreenCallannouncement:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Announcement.

6. Depending on your preference, select

ABC

Pre-Recorded (

) or Custom (

152

Section 2I:UsingYour Phone’sVoice Services

RecordingYour Name for a Pre-Recorded

Announcement

You can use a pre-recorded announcement with or without

your name. If you record your name, your phone uses your

name recording to announce that you are not available to

answer the call.

Torecordyourname:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Announcement.

6. Highlight Pre-Recorded and press Edit (right softkey).

7. Highlight RecordName and press

Ⅲ

If your name has already been recorded, select Yes

or No to overwrite the existing recording.

8. Press

9. Press

to start the first recording.

to stop recording.

10. After the first recording, press

again to start the

second recording.

11. Press

to stop recording.

Tip: Recording terminates automatically in 12 seconds.

Section 2I:UsingYour Phone’sVoice Services

153

Recording a CustomizedAnnouncement

Torecordanannouncement:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Announcement.

6. Highlight Custom and press Edit (right softkey).

7. Highlight Record and press

Ⅲ

When an announcement has already been

recorded, select Yes or No to overwrite the

existing recording.

8. Press

9. Press

to start the first recording.

to stop recording.

10. After the first recording, press

again to start the

second recording.

11. Press

to stop recording.

154

Section 2I:UsingYour Phone’sVoice Services

Reviewing anAnnouncement

Toreviewanannouncement:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Announcement.

6. Highlight Pre-Recorded or Custom and press

Edit (right softkey).

7. Highlight Play or Play:Speaker and press

Erasing anAnnouncement

Toeraseanannouncement:

1. Press

to access the main menu.

2. Select Tools/Extras.

3. Select VoiceServices (

ABC

4. Select ScreenCall (

5. Select Announcement.

6. Highlight Pre-Recorded or Custom and press

Edit (right softkey).

7. Select EraseName to erase the name for a Pre-Recorded

announcement and press

– or –

Select Erase to erase the message for a Custom

announcement and press

8. Select Yes.

Section 2I:UsingYour Phone’sVoice Services

155

156

Section 2J

Using Your Phone’s Built-in Camera

In This Section

ࡗ

TakingPictures

StoringPictures

RecordingVideos

StoringVideos

SendingSprintPCSPictureMail

ManagingSprintPCSPictureMail

Yourphone’sbuilt-incameragivesyoutheabilitytotakefull-

colordigitalpictures, viewyourpicturesusingthephone’s

display, andinstantlysendthemtofamilyandfriends. It’s fun

and as easy to use as a traditional point-and-click camera:

just take a picture, view it on your phone’s display, and

send it from your phone to up to ten people.

This section explains the features and options of your

wireless phone’s built-in camera.

Section 2J:UsingYour Phone’s Built-in Camera

157

Taking Pictures

Taking pictures with your phone’s built-in camera is as

simple as choosing a subject, pointing the lens, and

pressing a button. You can activate the phone’s camera

mode whether the phone is open or closed.

Totakeapicturewiththephoneopen:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

3. Select Camera(

) to activate camera mode.

(Additional camera options are available through the

camera mode Options menu. See “Camera Mode

Options” on page 161 for more information.)

Shortcut: To activate camera mode, you can also press

twice or just

press the side camera key (see illustration on page 12).

4. Using the phone’s main LCD as a viewfinder, aim the

camera lens at your subject.

5. Press Capture (left softkey),

, or the side

camera key until the shutter sounds. (The picture will

automatically be saved in the In Camera folder.)

Ⅲ

To return to camera mode to take another picture,

press

6. Press Next (right softkey) for more options:

Ⅲ

SendPicture to send the picture to up to 10

contacts at one time. (See page 186 for details.)

Ⅲ

GotoCamera to return to camera mode to take

another picture.

158

Section 2J:UsingYour Phone’s Built-in Camera

Ⅲ

UploadtoAlbums to upload the picture you just

took to the Sprint PCS Picture Mail Web site (

http://pictures.qwest.com). Depending on your

settings, you may be prompted to accept a

Sprint PCS Vision connection.

Ⅲ

PrintsbyMail to order 4" x 6" prints of the pictures

by mail and deliver them to any address you set up

at Sprint PCS Picture Mail Web site.

Ⅲ

Setas to assign the picture. Select PictureID or

ScreenSaver and press

Display/Edit to edit or display your picture’s details.

(See “In Camera Folder Options” on page 171 for

details.)

Ⅲ

Delete to delete the picture you just took.

PicsInCamera to go to the In Camera folder to

review your saved pictures.

Totakeapicturewiththephoneclosed:

1. Press and hold the side camera key to activate camera

mode.

2. Point the camera lens at your subject. (You can check

the picture framing through the external display

screen.)

Note: When taking a picture with the phone closed, the subject image

appears in reverse on the external display. The captured image will not be

saved in reverse.

3. Press the side camera key to take the picture. (The

picture will automatically be saved in the In Camera

folder.)

Section 2J:UsingYour Phone’s Built-in Camera

159

CreatingYour Sprint PCS Picture Mail

Password

The first time you use any of the picture management

options involving the Sprint PCS Picture Mail Web site, you

will need to establish a Sprint PCS Picture Mail password

through your wireless phone. This password will also allow

you to sign in to the Sprint PCS Picture Mail Web site at

http://pictures.qwest.com to access and manage your

uploaded pictures and albums.

TocreateyourSprintPCSPictureMailpassword:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

JKL

3. Select OnlineAlbums(

4. Select ViewAlbums (

). (You will be prompted to

create a Sprint PCS Picture Mail password.)

5. Enter a four- to eight-digit password and press

(You will be prompted to confirm your password.)

6. Please wait while the system creates your account.

Tip: Write down your Sprint PCS Picture Mail password in a secure place.

Once you have received confirmation that your account has

been successfully registered, you may upload and share

pictures and access the Sprint PCS Picture Mail Web site.

160

Section 2J:UsingYour Phone’s Built-in Camera

Camera Mode Options

When the phone is open and in camera mode, press Options

(right softkey) to display additional camera options:

ⅷ

PictureMode to select picture mode from Normal,

Night/Dark, Beach/Snow, Scenery, or SoftFocus.

ⅷ

Flash to activate the flash. (See “Setting the Flash” on

page 162 for details.)

ⅷ

Zoom to zoom in on a subject. You can adjust the zoom

from 1x to 20x. (See “Using the Zoom” on page 166 for

details.)

ⅷ

Self-timer to activate the camera’s timer. (See “Setting

the Self-timer” on page 163 for details.)

ⅷ

FunTools to select an option from the following:

Ⅲ

MultipleShots to shoot multiple shots on multiple

targets (see page 164).

Ⅲ

StitchShot to take a stitch shot by stitching separate

images together (see page 165).

Ⅲ

FunFrames to select your favorite fun picture frame

to decorate your picture.

Ⅲ

ColorTone to select a wide variety of color tones for

the picture.

Note: Zoom and Stitch Shot are not available when the resolution setting

is High (see “Selecting Camera Settings” on page 167 for details).

ⅷ

ImageControls to select an option from the following:

Ⅲ

Brightness to select Auto or Manual brightness

control.

Ⅲ

WhiteBalance to adjust white balance based on

changing conditions.

Section 2J:UsingYour Phone’s Built-in Camera

161

ⅷ

CameraSettings to select your settings. (See “Selecting

Camera Settings” on page 167 for details.)

PicsInCamera to go to your phone’s In Camera folder.

(See “In Camera Folder” on page 170 for details.)

GotoCamcorder to switch to video mode. (See

“Recording Videos” on page 176 for details.)

KeyGuidance to indicate the key functions in camera

mode.

SettingtheFlash

Toactivatetheflash:

1. From camera mode, press Options (right softkey).

2. Highlight Flash and press

3. Select one of the following options and press

Ⅲ

Off to deactivate the flash.

Ⅲ

OnThisShot to activate the flash for one shot.

Ⅲ

OnAlways to activate the flash for all pictures.

Ⅲ

Auto to activate the flash automatically.

Note: While the phone is open and in camera mode, press

to switch

between flash modes.

162

Section 2J:UsingYour Phone’s Built-in Camera

SettingtheSelf-timer

ToactivatetheSelf-timer:

1. From camera mode, press Options (right softkey).

2. Highlight Self-timer and press

3. Highlight the length of delay you want the timer to use

(10seconds or 5seconds) and press

Ⅲ

To deactivate the Self-timer, highlight Off and

press

4. Press Start (left softkey) when you are ready to start

the timer. ( appears on the lower left portion of the

main LCD during the Self-timer countdown.)

5. Get ready for the picture. (When the timer is down to

three seconds, the Self-timer icon will turn red and the

phone will begin to beep.)

TocanceltheSelf-timerafterithasstarted:

ᮣ

Press Cancel (right softkey).

Note: While the Self-timer is active, all keys are disabled except

, and Cancel (right softkey).

Section 2J:UsingYour Phone’s Built-in Camera

163

TakingMultipleShots

This feature allows you to take up to nine continuous shots

of one moment. When you take multiple shots, the

will appear in the viewfinder.

icon

Totakemultipleshots:

1. From camera mode, press Options (right softkey).

2. Highlight FunTools and press

3. Highlight MultipleShots and press

Note: If your phone’s memory is full, the Multiple Shots option will not

appear.

4. Select one of the following options and press

Ⅲ

Off to deactivate the multiple shots option.

Ⅲ

3Shots to take a series of three pictures.

Ⅲ

6Shotsto take a series of six pictures. (Only

appears when the resolution setting is Low or

Medium.)

Ⅲ

9Shots to take a series of nine pictures. (Only

appears when the resolution setting is Low.)

5. Select the duration of the interval between shots

(Normal or Fast) and press

6. Press Capture (left softkey),

, or the side

camera key to take the pictures. (The Multiple Shots

folder will display up to nine thumbnail pictures per

screen.)

Note: After taking multiple shots, the pictures are automatically saved in

the In Camera folder. (See “In Camera Folder” on page 170 for details.)

164

Section 2J:UsingYour Phone’s Built-in Camera

TakingStitchShots

Stitch shot allows you to stitch separate images together.

With this feature, your phone’s viewfinder is divided in two

and you can shoot each part separately. When you shoot the

first part, the camera displays a section of the previous part,

so you can line up the next picture with the first one.

Totakeastitchshot:

1. From camera mode, press Options (right softkey).

2. Highlight FunTools and press

3. Highlight StitchShot and press

4. Select Vertical or Horizontal and press

Ⅲ

Use your navigation key to switch the stitch

display.

5. To take the first picture, press

6. To take the second picture, press

Note: This option is not available when the resolution setting is High (see

page 167).

Section 2J:UsingYour Phone’s Built-in Camera

165

UsingtheZoom

This feature allows you to zoom in on an object when you

take a picture. Depending on your resolution settings, you

can adjust the zoom from 1x to 20x.

Tousethezoom:

1. From camera mode, press the navigation key right or

left, or the side volume key up or down to adjust the

zoom. (The gauge bar appears.)

2. Press Capture (left softkey),

, or the side

camera key to take the picture. (The picture will

automatically be saved in the In Camera folder.)

Note: The Zoom gauge will not appear when the resolution setting is High.

UsingtheMini-Flashlight

This function allows you to use the phone’s camera flash as

a miniature flashlight. To use this function, your phone

must be in standby mode with the Side Key Guard

unlocked. (See page 77 for the Side Key Guard.)

Tousetheminiflashlight:

ᮣ

With the flip closed and in standby mode, press and

hold the Side Volume key (

on for 8 seconds.)

). (The light remains

Note: This function doesn’t apply when a Missed Call or Notification is

displayed.

166

Section 2J:UsingYour Phone’s Built-in Camera

SettingAutoDelete

With this feature, pictures and videos that have been

uploaded to your online Sprint PCS Picture Mail account

will be erased automatically from your phone. (Default

setting is Off.)

TosetAutoDelete:

1. Press

to access the main menu.

2. Select Picture&Video.

3. Select Settings&Info (

4. Select AutoDelete (

5. Select On or Off.

PQRS

Selecting Camera Settings

Toselectyourcamerasettings:

1. From camera mode, press Options (right softkey).

2. Highlight CameraSettings and press

3. Select one of the following options and press

Ⅲ

Resolution to select a picture’s file size

(High-640x480, Medium-320x240, or Low-160x120).

Ⅲ

Quality to select the picture quality setting (Fine,

Normal, or Economy).

ShutterSound to select a shutter sound (Default,

Say“Cheez”, or Off).

FullScreen to expand the camera display to full

screen view without icons (except the flash icon).

Section 2J:UsingYour Phone’s Built-in Camera

167

ViewingYour Camera’s StatusArea Display

CameraStatusArea

9. Taken/Remaining

number of pictures

1. Flash

8. Memory Gauge

7. Resolution

2. White Balance

3. Brightness

4. Picture Mode

6. Multiple Shots

5. Self-timer

CameraIconIndication

No.

Function

Icons

Details

To use the flash for only one shot.

OnThis Shot

To use a flash every time you take a picture.

To use the auto flash function.

On Always

Auto

Flash

Use this setting for sunny weather.

Sunny

Cloudy

Use this setting for cloudy weather.

Use this setting for standard household lighting.

Use this setting for fluorescent lighting.

White

Tungsten

Fluorescent

Manual

Balance

For the manual setting of white balance.

For the manual setting of brightness.

Brightness

168

Section 2J:UsingYour Phone’s Built-in Camera

No.

Function

Icons

Details

Night/Dark

Use this setting in low light.

Beach/Snow

Scenery

Use this setting in bright light.

Picture

Mode

Use this setting for scenery from a distance.

Use this setting to“soften” the picture.

Soft Focus

Numeric countdown will appear when the

self timer has been activated.

Self-timer

Use this setting for multiple shots.

For high picture resolution.

For medium picture resolution.

For low picture resolution.

Multiple Shots

High

Resolution Medium

Low

Shows the remaining memory.

The number of stored pictures.

Memory Gauge

Picture Number

Remaining Pictures

The number of pictures you can take with the

current resolution.

Section 2J:UsingYour Phone’s Built-in Camera

169

Storing Pictures

Your phone’s picture storage area is called MyPictures.

There are two types of folders in My Pictures that can be

used separately according to your needs:

ⅷ

In Camera (see below)

ⅷ

SavedtoPhone (see page 174)

In Camera Folder

Once a picture is taken, it is automatically saved to the

InCamera folder. From the In Camera folder, you can view

all of the pictures you have taken, store selected images in

your phone, send pictures to the Sprint PCS Picture Mail

Web site (http://pictures.qwest.com), delete images, and

access additional picture options.

ToreviewyourstoredpicturesintheInCamerafolder:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

DEF

3. Select MyPictures(

4. Select InCamera (

). (Thumbnail pictures will

display, up to nine pictures at a time.)

5. Use your navigation key to view and scroll through

the pictures.

170

Section 2J:UsingYour Phone’s Built-in Camera

In Camera Folder Options

When you are viewing the In Camera folder, press Options

(right softkey) to display the following options:

ⅷ

Expand to switch to the Expand view mode.

ⅷ

Thumbnail to switch to the Thumbnail view mode.

ⅷ

UploadtoAlbums to upload pictures from the In Camera

folder to the Sprint PCS Picture Mail Web site

(http://pictures.qwest.com). Depending on your settings,

you may be prompted to accept a Sprint PCS Vision

connection. Choose from the following options:

Ⅲ

ThisPicture to upload the currently highlighted

picture.

Ⅲ

SelectedPictures to upload the selected pictures.

Press

to select a picture (the check box on the

lower right corner will be marked).

Ⅲ

AllPictures to upload all pictures in the In Camera

folder.

Note: If this is the first time you have accessed the Sprint PCS Picture Mail

account, you will be prompted to create your Sprint PCS Picture Mail

password. See“CreatingYou r S prin t P C S P ictur e M ai l P assword ”o n p ag e 1 60.

ⅷ

PrintsbyMail to order 4" x 6" prints of the pictures by

mail and deliver them to any address you set up at the

Sprint PCS Picture Mail Web site.

ⅷ

Setas to assign the picture.

Ⅲ

PictureID to display the currently highlighted

picture for incoming calls from a specific Phone

Book entry. Select the desired entry and press

Ⅲ

ScreenSaver to display the currently highlighted

picture as a screen saver. Select MainLCD or

SubLCD and press

Section 2J:UsingYour Phone’s Built-in Camera

171

Note: Pictures assigned as Picture ID or Screen Savers will automatically

be copied to the Saved to Phone folder.

ⅷ

Display/Edit to display the following options:

Ⅲ

SpecialEffects to apply special effects on your

pictures. You can select from ColorTone,

FunStamps, or Rotate.

Ⅲ

TextCaption to edit the selected picture’s caption.

Ⅲ

PictureInfo to display information such as the

picture’s caption, time/date, and size.

Ⅲ

FullScreen to display the selected picture in full

screen mode without any icons or Info Bar.

Ⅲ

InfoBar to display the selected picture’s

information bar. (Expanded view only.)

Ⅲ

Slideshow to view your pictures in slideshow

mode. (Only available when two or more pictures

are saved to the folder.)

Ⅲ

Sortby to sort pictures by Name, Size, Date-Taken

or Date-Uploaded. (Thumbnail view only.)

ⅷ

Delete to delete pictures in the In Camera folder. Select

ThisPicture, SelectedPictures, or AllPictures.

Note: Deleting pictures will free up memory space in your phone to enable

you to take more pictures. Once deleted, pictures cannot be uploaded to your

online Sprint PCS Picture Mail account or saved to the Saved to Phone folder.

ⅷ

SavetoPhone to save the selected pictures in the

SavedtoPhone folder.

Note: Save to Phone and Upload to Albums copy pictures from your

phone’s In Camera folder to your Saved to Phone folder or your online

Sprint PCS Picture Mail account. Pictures that have been stored in your

Saved to Phone folder or uploaded to your online account will remain

available in the In Camera folder until you erase them.

172

Section 2J:UsingYour Phone’s Built-in Camera

ⅷ

GotoSavedtoPh. to display the SavedtoPhone folder.

GotoCamera to activate Camera mode.

ThumbnailView

Name of the currently displayed folder

Count of saved

pictures

Currently Selected

picture

Current picture

number

Uploaded icon

Check Box

File Size

and Caption

Left softkey

Right softkey

ExpandView

Section 2J:UsingYour Phone’s Built-in Camera

173

Saved to Phone Folder

When you assign a picture, it will automatically be saved in

the SavedtoPhone folder. The Saved to Phone folder allows

you to store copies of pictures on your phone and to assign

pictures to various phone tasks.

TosaveapicturetotheSavedtoPhonefolder:

1. From the In Camera folder (see “In Camera Folder” on

page 170), select a picture you wish to save to the

Saved to Phone folder and press . (You may select

multiple pictures.)

Tip: If there is no selected picture, the currently highlighted picture will be

selected.

2. Press Options (right softkey). (The In Camera folder

options will display.)

3. Select SavetoPhone. (A copy of the picture will be

saved to the Saved to Phone folder.)

ToviewpicturesstoredintheSavedtoPhonefolder:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

DEF

3. Select MyPictures(

ABC

4. Select SavedtoPhone (

). (Thumbnail pictures will

display, up to nine pictures at a time.)

5. Use your navigation key to view and scroll through

the pictures.

174

Section 2J:UsingYour Phone’s Built-in Camera

Saved to Phone Folder Options

When you are viewing the Saved to Phone folder, press

Options (right softkey) to display the following options:

ⅷ

Setas to assign the picture. Select PictureID or

ScreenSaver and press

ⅷ

Display/Edit to edit or display your picture’s details. (See

“In Camera Folder Options” on page 171 for details.)

Delete to delete pictures in the Saved to Phone folder.

Select ThisPicture, SelectedPictures, or AllPictures.

Note: Deleting pictures will free up memory space in your phone to enable

you to take more pictures.

ⅷ

PicsInCamera to display the InCamera folder.

ⅷ

GotoCamera to activate Camera mode.

Note: Assigned pictures will be identified with the icon.

Name of the currently displayed folder

Count of saved

Currently Selected

pictures

picture

Current picture

Check Box

number

Assigned icon

Caption

Left softkey

Right softkey

Section 2J:UsingYour Phone’s Built-in Camera

175

Recording Videos

In addition to taking pictures, you can also record, view,

and send videos to your friends and family with your

phone’s built-in video camera.

Torecordavideo:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

ABC

3. Select Camcorder(

) to activate video mode.

(Additional video options are available through the

video mode Options menu. See “Video Mode Options”

on page 178 for more information.)

4. Using the phone’s main LCD as a viewfinder, aim the

camera lens at your subject.

5. Press Record (left softkey),

, or the side camera

key to begin recording. (Maximum recording time is

30 seconds.)

6. Press

, Stop (right softkey), or the side camera key

to stop recording. (The video will automatically be

saved in the In Camcorder folder.)

Ⅲ

To return to video mode to record another video,

press

or the side camera key.

7. Press Next (right softkey) for more options:

Ⅲ

SendVideo to send the video. (See page 190 for

details.)

Ⅲ

GotoCamcorder to return to video mode to take

another video.

176

Section 2J:UsingYour Phone’s Built-in Camera

Ⅲ

UploadtoAlbums to upload the video you just took

to the Sprint PCS Picture Mail Web site.

Setas to assign the video. Select Ringer or

Animation and press

Ⅲ

Playback to play back the video you just took.

Delete to delete the video you just took.

VideosInCamcord. to access the In Camcorder

folder to review your saved videos.

Totakeavideowiththeflipclosed:

1. Press and hold the side camera key to activate camera

mode.

2. Press and hold the side camera key to activate video

mode.

3. Point the camera lens at your subject. (You can check

the video framing through the Sub LCD.)

Note: When taking a video with the phone closed, the subject image

appears in reverse on the external display. The captured image will not be

saved in reverse.

4. Press the side camera key to start recording.

5. Press the side camera key to stop recording. (Your

video will be saved automatically in the In Camcorder

folder.)

Section 2J:UsingYour Phone’s Built-in Camera

177

Video Mode Options

Several options are available from video mode.

Press Options (right softkey) to display additional options:

ⅷ

VideoMode to select video mode from Normal,

Night/Dark, Beach/Snow, Scenery, or SoftFocus.

ⅷ

VideoLight to select a Video Light setting. Select On to

light the video light.

ⅷ

Zoom to zoom in on an object. You can adjust the zoom

from 1x to 18x in Medium-resolution, or 1x to 12x in

Good-resolution.

ⅷ

Self-timer to activate the timer function. (See “Setting

the Self-timer” on page 163 for details.)

ⅷ

ImageControls to select an option from the following:

Ⅲ

Brightness to select Auto or Manual brightness

control.

Ⅲ

WhiteBalance to adjust white balance based on

changing conditions.

ⅷ

Camcord.Settings to select your settings. (See “Selecting

Camcorder Settings” on page 179 for details.)

ⅷ

VideosInCamcord. to go to your phone’s In Camcorder

folder (if applicable).

ⅷ

GotoCamera to switch to camera mode (if applicable).

ⅷ

KeyGuidance to indicate the key functions in video

mode.

178

Section 2J:UsingYour Phone’s Built-in Camera

Selecting Camcorder Settings

Toselectyourcamcordersettings:

1. From video mode, press Options (right softkey).

2. Highlight Camcord.Settings and press

3. Select an option from the following and press

Ⅲ

Resolution to select a file size (Good-176x144 or

Medium-128x96) for a video.

Ⅲ

VideoQuality to select video quality from

Rich-15sec., Normal-20sec., or Economy-30sec.

SilentMovie to select On to record without sounds.

Select Off to deactivate this feature.

CueSound to select a cue sound (Default,

“Action&Cut”, or Off).

SkinFrames to select your favorite frame. (Only

appears when the resolution setting is Medium.)

Note: Recording time varies depending on the Video Quality.

Section 2J:UsingYour Phone’s Built-in Camera

179

ViewingYourVideo’s StatusArea Display

VideoStatusArea

9. Remaining Time/

Memory Gauge

1. Video Light

2. White Balance

3. Brightness

8. Resolution

4. Video Mode

7. Progress Bar

5. Volume

Indicator

6. Recording Time

VideoIconIndication

No.

Function

Icons

Details

Appears when the video light setting is On.

Video Light

Same as Camera Status Area.(See pa g e 168 for details.)

For the manual setting of brightness.

White Balance

Brightness Manual

Video Mode

Same as Camera Status Area.(See pa g e 169 for details.)

Shows the volume levels (0-8 levels).

Volume Indicator

RecordingTime

Progress Bar

Shows the recording time.

Shows the progress status while recording/

playing video.

Good

Resolution

For good video resolution.

For medium video resolution.

shows the remaining time.

shows the remaining memory.

Medium

RemainingTime

Memory Gauge

180

Section 2J:UsingYour Phone’s Built-in Camera

StoringVideos

Your phone’s video storage area is called MyVideos. There

are two types of folders in My Videos that can be used

separately according to your needs:

ⅷ

In Camcorder (see below)

ⅷ

SavedtoPhone (see page 184)

In Camcorder Folder

Once a video is recorded, it is automatically saved to the

InCamcorder folder. From the In Camcorder folder, you can

view all of the videos you have taken, store selected videos

in your phone, send videos to the Sprint PCS Picture Mail

Web site, delete videos, and access additional video

options.

ToreviewyourstoredvideosintheInCamcorderfolder:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

GHI

3. Select MyVideos(

4. Select InCamcorder (

). (Thumbnail stills will

display, up to nine at a time.)

5. Use your navigation key to scroll through and select a

video.

6. Press Play (left softkey) to play the selected video.

Tip: Press the Side Volume key up or down to adjust the video volume

while playing a video or in the Expanded view mode.

Section 2J:UsingYour Phone’s Built-in Camera

181

In Camcorder Folder Options

When you are in the In Camcorder folder, several options

are available. Press Options (right softkey) to display the

following options:

ⅷ

Expand to switch to the Expand view mode.

ⅷ

Thumbnail to switch to the Thumbnail view mode.

ⅷ

SendVideo to send video files. (See page 190 for details.)

ⅷ

UploadtoAlbums to upload videos saved in the In

Camcorder folder to the Sprint PCS Picture Mail Web site.

Choose from ThisVideo, SelectedVideos, or AllVideos.

ⅷ

Setas to assign the video. Select Ringer or Animation and

press

ⅷ

Display/Edit to select an option from the following:

Ⅲ

TextCaption to edit the caption of a video.

Ⅲ

VideoInfo to display information of a video, such as

caption, time/date, size, etc.

Ⅲ

Sortby to sort videos by Name, Size, Date-Taken or

Date-Uploaded. (Thumbnail view only.)

ⅷ

Delete to delete videos in the In Camcorder folder.

Select ThisVideo, SelectedVideos, or AllVideos.

Note: Deleting videos will free up memory space in your phone to enable

you to take more videos. Once erased, videos cannot be uploaded to your

online Sprint PCS Picture Mail account or saved to the Saved to Phone

folder.

182

Section 2J:UsingYour Phone’s Built-in Camera

ⅷ

SavetoPhone to save the selected videos in the Saved to

Phone folder.

ⅷ

GotoSavedtoPh. to display the Saved to Phone folder.

GotoCamcorder to activate video mode.

Note: Upload to Albums and Save to Phone copy videos from your

phone’s In Camcorder folder to your Saved to Phone folder or your online

Sprint PCS Picture Mail account. Videos that have been stored in your

Saved to Phone folder or uploaded to your online account will remain

available in the In Camcorder folder until you erase them.

Note: If this is the first time you have accessed the Sprint PCS Picture Mail

account, you will be prompted to create your Sprint PCS Picture Mail

password. (See “Creating Your Sprint PCS Picture Mail Password” on

page 160.)

VideoThumbnailView

Name of the currently displayed folder

Count of saved

Currently Selected

videos

video

Current video

Uploaded icon

number

Check Box

File Size

and Caption

Left softkey

Right softkey

Section 2J:UsingYour Phone’s Built-in Camera

183

Saved to Phone Folder

When you assign a video, it will automatically be saved in

the SavedtoPhone folder. The Saved to Phone folder allows

you to store copies of videos on your phone and to assign

videos to various phone tasks.

TosaveavideototheSavedtoPhonefolder:

1. From the In Camcorder folder (see “In Camcorder

Folder” on page 181), select a video you wish to save to

the Saved to Phone folder and press . (You may select

multiple videos.)

Tip: If there is no selected video, the currently highlighted video will be

selected.

2. Press Options (right softkey). (The In Camcorder

folder options will display.)

3. Select SavetoPhone. (A copy of the video will be saved

to the Saved to Phone folder.)

184

Section 2J:UsingYour Phone’s Built-in Camera

ToreviewyourstoredvideosintheInCamcorderfolder:

1. Press to access the main menu.

2. Select Picture&Video toaccessthePicture&Videomenu.

GHI

3. Select MyVideos(

ABC

4. Select SavedtoPhone (

). (Thumbnail stills will

display, up to nine at a time.)

5. Use your navigation key to scroll through and select a

video.

6. Press Play (left softkey) to play the selected video.

Tip: Press the Side Volume key up or down to adjust the video volume

while playing a video or in the Expanded view mode.

Saved to Phone Folder Options

When you are viewing the Saved to Phone folder, press

Options (right softkey) to display the following options:

ⅷ

Expand to switch to the Expand view mode.

ⅷ

Thumbnail to switch to the Thumbnail view mode.

ⅷ

Setas to assign the video. Select Ringer or Animation and

press

ⅷ

Display/Edit to display the currently highlighted video’s

details or edit the videos.

Delete to delete videos stored in the Saved to Phone folder.

Select This Video,SelectedVideos, or All Videos.

ⅷ

VideosInCamcord. to display the In Camcorder folder.

GotoCamcorder to activate video mode.

Note: Assigned videos will be identified with the icon.

Section 2J:UsingYour Phone’s Built-in Camera

185

Sending Sprint PCS Picture Mail

Once you’ve taken a picture, you can use the messaging

capabilities of your wireless phone to instantly share it with

family and friends. You can send a picture to up to ten

people at a time using their email addresses or their

wireless phone numbers.

Sending Pictures From the In Camera Folder

TosendpicturesfromtheInCamerafolder:

1. Press

to access the Picture & Video menu.

DEF

2. Select MyPictures (

3. Select InCamera (

4. Highlight a picture you wish to send and press

(The check box on the lower right corner will be

marked. You can select multiple pictures.)

5. Press Send (left softkey). (You will see a message on

the display.)

Note: The first time you send Sprint PCS Picture Mail, you will be

prompted to establish a Sprint PCS Picture Mail Web site account and

password. (See “Creating Your Sprint PCS Picture Mail Password” on

page 160.)

6. Select Recipients and press

186

Section 2J:UsingYour Phone’s Built-in Camera

7. Select one of the following options and press

Ⅲ

PhoneBookEntry to select recipients from your

Phone Book. Highlight a recipient and press

select.

Ⅲ

PersonalListEnt. to select a recipient from your

personal list.

PersonalGrps. Ent. to select a recipient from your

personal group list.

MobilePhone# to enter a mobile phone number

directly.

Ⅲ

EmailAddress to enter an email address directly.

FromRecentList to select from a list of recent

Sprint PCS Picture Mail or messaging recipients.

8. Press Next (left softkey) when you are finished adding

recipients. (You may include up to ten recipients per

message.)

9. If you wish to include a text message, scroll to Message

and press the appropriate softkey. Enter your message

using your keypad (or press Mode [right softkey] to

select a character input mode) and press . (See

“Entering Text” on page 41.)

10. If you wish to include a voice memo with the picture,

highlight the box next to Audio and press Record (right

softkey) to record. Press

to start recording.

(Maximum recording time is ten seconds.)

Section 2J:UsingYour Phone’s Built-in Camera

187

11. Confirm the recipients, message, voice memo, and

picture.

Ⅲ

To change a recipient, highlight the recipient,

press the appropriate softkey, and follow the

instructions in step 7 to select or edit the

recipient.

Ⅲ

To change the text message, scroll to Message and

press the appropriate softkey.

Ⅲ

To change the voice memo, highlight the box next

to Audio and press the appropriate softkey to

display options:

ࡗ

Play to play the attached voice memo.

ࡗ

RecordNew to re-record the voice memo.

ࡗ

Erase to delete the voice memo from the

message.

Ⅲ

To change the attached picture(s), select the

thumbnail picture and press the appropriate

softkey. Select FromMyPics. or TakePicture and

press . After selecting the new picture(s), press

Next (left softkey).

12. Press the appropriate softkey to send the picture.

188

Section 2J:UsingYour Phone’s Built-in Camera

Sending Pictures From Messaging

You can also send Sprint PCS Picture Mail from your

phone’s Messaging menu.

TosendpicturesfromtheMessagingmenu:

1. Press

to access the main menu.

2. Select Messaging to access the Messaging menu.

3. Select SendMessage(

ABC

4. Select Picture (

5. Select FromMyPics. (The In Camera folder will display,

with up to nine thumbnail pictures per screen.)

6. Use the navigation key to select the picture you wish

to send and press . (You can select multiple

pictures.)

7. Press Next (left softkey). To complete and send the

picture, follow steps 6-12 in “Sending Pictures From

the In Camera Folder” on page 186.

Tip: To take and send a new picture from Messaging, select Take Picture

during step 5 above, take the new picture, press Next (right softkey), and

follow steps 6-12 in “Sending Pictures From the In Camera Folder” on

page 186.

Tip: You can also send pictures from Online Albums by selecting

Online Albums during step 5 above.

Section 2J:UsingYour Phone’s Built-in Camera

189

SendingVideos From the In Camcorder Folder

TosendvideosfromtheInCamcorderfolder:

1. Press

to access the Picture & Video menu.

GHI

2. Select MyVideos (

3. Select InCamcorder (

4. Highlight a video you wish to send and press . (The

check box on the lower right corner will be marked.

You can select multiple videos.)

5. Press Options (right softkey) and select SendVideo.

6. To complete and send the Sprint PCS Video Mail,

follow steps 6-12 in “Sending Pictures From the In

Camera Folder” on page 186.

190

Section 2J:UsingYour Phone’s Built-in Camera

SendingVideos From Messaging

TosendvideosfromtheMessagingmenu:

1. Press

to access the main menu.

2. Select Messaging to access the Messaging menu.

3. Select SendMessage (

DEF

4. Select Video (

5. Select FromMyVideos (The In Camcorder folder will

display, with up to nine thumbnail videos per screen.)

6. Use the navigation key to select the video you wish to

send and press . (You can select multiple videos.)

7. Press Next (right softkey). To complete and send the

video, follow steps 6-12 in “Sending Pictures From the

In Camera Folder” on page 186.

Tip: To take and send a new video from Messaging, select Take Video

during step 5 above, take the new video, press Next (right softkey), and

follow steps 6-12 in “Sending Pictures From the In Camera Folder” on

page 186.

Tip: You can also send videos from Online Albums by selecting

Online Albums during step 5 above.

Section 2J:UsingYour Phone’s Built-in Camera

191

Managing Sprint PCS Picture Mail

Using the Sprint PCS Picture MailWeb site

Once you have uploaded pictures from your phone

to your online Sprint PCS Picture Mail account at

http://pictures.qwest.com (see “In Camera Folder Options” on

page 171), you can use your personal computer to manage

your pictures. From the Sprint PCS Picture Mail Web site

(http://pictures.qwest.com) you can share pictures, edit album

titles, add captions and organize images. You can even send

your pictures to be printed at participating retail locations.

You will also have access to picture management tools to

improve and customize your pictures. You’ll be able to

lighten, darken, crop, add antique effects, add comic

bubbles and cartoon effects, and use other features to

transform your pictures.

ToaccesstheSprintPCSPictureMailWebsite:

1. From your computer’s Internet connection, go to

http://pictures.qwest.com.

2. Enter your wireless phone number and Sprint PCS

Picture Mail password to register. (See “Creating Your

Sprint PCS Picture Mail Password” on page 160.)

192

Section 2J:UsingYour Phone’s Built-in Camera

Managing Online Pictures andVideos From

Your Phone

You can use your phone to manage, edit, or share pictures

and videos you have uploaded to the Sprint PCS Picture

Mail Web site at http://pictures.qwest.com.

Toviewyouronlinepicturesandvideosfromyourphone:

1. Press

to access the main menu.

2. Select Picture&Video to access the Picture & Video

menu.

Shortcut: Instead of steps 1 and 2 above, press

JKL

3. Select OnlineAlbums (

). (Depending on your

4. Select View Albums (

settings you may be prompted to accept a Sprint PCS

Vision connection.) (The Uploads folder and your

albums appear.)

5. Highlight Uploads or an album title and press

display.

6. Highlight Picture or Video and press . (Thumbnail

pictures or videos, up to nine per screen, are

displayed.)

7. Use your navigation key to select a picture or video.

8. Press Options (right softkey) to display your online

picture or video options.

Section 2J:UsingYour Phone’s Built-in Camera

193

Uploading Pictures andVideos

Touploadpictures:

1. Press

to access the Picture & Video menu.

JKL

2. Select OnlineAlbums (

ABC

3. Select UploadPics (

). (Thumbnail pictures will

display.)

4. Select the picture(s) you wish to upload and press

Upload (left softkey).

5. Highlight ThisPicture, SelectedPictures, or AllPictures

and press

6. Highlight “Uploads”Area and press

– or –

Highlight OtherAlbums, press

desired album and press

and then select your

Touploadvideos:

1. Press

to access the Picture & Video menu.

JKL

2. Select OnlineAlbums (

DEF

3. Select UploadVideos (

). (Thumbnail videos will

display.)

4. Select videos and press Upload (left softkey).

5. Highlight ThisVideo, SelectedVideos, or AllVideos and

press

6. Highlight “Uploads”Area and press

– or –

Highlight OtherAlbums, press , and then select your

desired album and press

194

Section 2J:UsingYour Phone’s Built-in Camera

DownloadingYour Online Pictures andVideos

From your online albums display at http://pictures.qwest.com,

you can select pictures or videos to download to your

phone’s folder.

TodownloadpicturesfromtheSprintPCSPictureMail

Website:

1. From the online pictures display, select the picture

you wish to download and press Options (right

softkey). (See “Managing Online Pictures and Videos

From Your Phone” on page 193.)

2. Highlight SavetoPhone and press

3. Select one of the following options and press

Ⅲ

Setas to assign the picture (PictureID or

ScreenSaver).

Ⅲ

DownloadOnly to download the picture to the

In Camera folder.

TodownloadvideosfromtheSprintPCSPictureMail

Website:

1. From the online video display, select the video you

wish to download and press Options (right softkey).

(See “Managing Online Pictures and Videos From Your

Phone” on page 193.)

2. Highlight SavetoPhone and press

Ⅲ

Setas to assign the video (Ringer or Animation).

Ⅲ

DownloadOnly to download the video to the

In Camcorder folder.

Section 2J:UsingYour Phone’s Built-in Camera

195

Sending Online Sprint PCS Picture Mail

TosendpicturesusingtheonlineAddress Book:

1. From the online Sprint PCS Picture Mail display at

http://pictures.qwest.com, select a picture you wish to

send and press Send (left softkey). (See “Managing

Online Pictures and Videos From Your Phone” on

page 193.)

2. Highlight Recipients and press

3. Highlight OnlineAddr. Book and press

4. Highlight a recipient or recipients (up to 10) from

your Online Address Book and press

5. Press Done (left softkey) when you are finished

selecting recipients.

6. To include a text message, highlight the box under

Message and press Add (right softkey). Enter your

message and press

7. Confirm your recipients and attached data.

8. Press Send (left softkey) to send the picture message.

196

Section 2J:UsingYour Phone’s Built-in Camera

TosendvideosfromtheonlineAddressBook:

1. From the online video display, select a video you wish

to send and press Options (right softkey). (See

“Managing Online Pictures and Videos From Your

Phone” on page 193.)

2. Highlight SendVideo and press

3. To complete and send the video message, follow steps

2-8 on page 196.

Tosendanalbumfromtheonlinepicturesmenu:

1. From the online albums display, select an album you

wish to send and press Send (left softkey). (See

“Managing Online Pictures and Videos From Your

Phone” on page 193.)

2. Follow steps 2-8 in “To send pictures using the online

Address Book” on page 196 to complete and send

your Sprint PCS Picture Mail album.

Section 2J:UsingYour Phone’s Built-in Camera

197

Accessing Online Picture andVideo Options

FromYour Phone

ToaccessyouronlinePictureandVideooptionsfromyour

wirelessphone:

1. Select a picture or video from your online Picture Mail

(see “Managing Online Pictures and Videos From Your

Phone” on page 193).

2. Press Options (right softkey) to display options.

3. To select an option, highlight it and press

Ⅲ

Expand to switch to the Expand view mode.

Ⅲ

Thumbnail to switch to the Thumbnail view mode.

PrintsbyMail to order 4" x 6" prints of the pictures

by mail and deliver them to any address you set up

at Sprint PCS Picture Mail Web site. (Picture Only.)

Ⅲ

SendVideo to send videos. (See “Sending Online

Sprint PCS Picture Mail” on page 196 for details.)

(Video Only.)

Ⅲ

Copy/Move to copy or move pictures or videos to a

selected album.

Display/Edit to display the details of currently

highlighted picture/video or edit the

picture/video.

Ⅲ

Delete to erase pictures or videos saved in the

current album (or Uploads folder).

SavetoPhone to select Setas to assign pictures or

videos to phone tasks or DownloadOnly to

download the pictures or videos to the In Camera

or In Camcorder folder.

198

Section 2J:UsingYour Phone’s Built-in Camera

Ⅲ

CreateAlbum to create a new album (from Uploads

folder only).

OnlineAlbums to switch the display to the online

album list.

Note: The picture and video options may vary depending on the item you

select.

ToaccessyouronlineAlbumsoptionsfromyour

wirelessphone:

1. Display the album list in the Online Sprint PCS Picture

Mail menu (see “Managing Online Pictures and Videos

From Your Phone” on page 193).

2. Use your navigation key to select an album (or

Uploads folder).

3. Press Options (right softkey) to display options.

4. To select an option, highlight it and press

Ⅲ

CreateAlbum to create a new album. Enter a new

album name and press Save (left softkey).

Ⅲ

DeleteAlbum to delete the selected album.

RenameAlbum to rename the selected album.

Enter a new name and press Save (left softkey).

Ⅲ

AlbumInfo to display detailed information about

the album.

Tip: The Uploads folder cannot be erased or renamed.

Section 2J:UsingYour Phone’s Built-in Camera

199

200

Section 2K

Using Ready Link

In This Section

ࡗ

GettingStartedWithReadyLink

MakingandReceivingaReadyLinkCall

AddingandEditingReadyLinkContacts

ErasingReadyLinkListEntries

UpdatingYourReadyLinkLists

ManagingReadyLinkSettings

YourSCP-8300bySanyogivesyoutheabilitytoquickly

connectwithotherReadyLinkusersfor“walkie-talkie-style”

communicationfromanywhere, toanywhereonthenetwork

availabletoyou.

This section explains the features and options of your

phone’s Ready Link capabilities.

Section 2K:Using Ready Link

201

Getting StartedWith Ready Link

Ready Link allows you to enjoy quick, two-way, “walkie-

talkie-style” communication with your friends, family, and

co-workers. You can make one-to-one or one-to-many calls

(up to five others on the same call) to any other Ready Link

user, anywhere on the network available to you. You can

make and receive Ready Link calls when your phone

displays the Ready Link icon.

Setting Ready Link Mode

ToenableordisableReadyLinkmode:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

4. Select Enable/Disable (

5. Select Enable. (The default is Disable.)

Ⅲ

Enable: Lets you make or receive Ready Link calls

any time your phone is not in use.

Ⅲ

Disable: Disables your phone’s Ready Link service;

you will not be able to make or receive Ready Link

calls or access your Ready Link contacts.

Tip: If you haven’t signed up for the Ready Link service and Ready Link

mode is set to Disable, or the Ready Link service is locked, you can use the

Ready Link/Memo Button as a Voice Memo button in standby mode.

202

Section 2K:Using Ready Link

PreparingYour Phone for Ready Link Service

Every time you turn on your phone, your phone will identify

itself and make itself available to the Ready Link network.

ᮣ

When you turn on your phone in an area where

Ready Link service is available, your phone willdisplay

“PreparingReadyLinkservice... Pleasewait.” (When the

Ready Link icon appears on the display, your phone is

ready to make and receive Ready Link calls.)

Ready Link CallAlerts

There are several ways your phone alerts you during

Ready Link calls.

When you make or receive a Ready Link call:

ⅷ

The phone sounds (depending on the Ringer Type and

Ringer Volume setting).

ⅷ

The backlight illuminates.

ⅷ

The screen displays a Ready Link call message.

ⅷ

The other party’s Ready Link number and name (if

available) are displayed.

ⅷ

The screen displays who has the floor.

ThestatusofaReadyLinkcallisdisplayedasfollows:

ⅷ

The Green LED On indicates you have the floor and may

speak.

ⅷ

The Red LED On indicates another contact has the floor.

ⅷ

The LED Off indicates the floor is open. (You can take

the floor and speak by pressing and holding

Section 2K:Using Ready Link

203

MainLCDDisplayduringaReadyLinkCall

Ready Link Main Screen

Redial Contact

Current List

Contact Names

Go to (left softkey)

Options (right softkey)

Ready Link In-Call Screen

Contact Name

R-Link Number

Floor Status

204

Section 2K:Using Ready Link

Making and Receiving a Ready Link Call

Displaying the Ready Link List

ᮣ

From standby mode, press R-Link (left softkey) or the

Ready Link/Memo button on the side of your phone

(

) to access the Ready Link List.

Tip: The first time you access the list, the Ready Link Help message will

appear. Press Yes (left softkey) and Next (left softkey) to read a brief

introduction of Ready Link.

Selecting a Contacts List

When your phone displays a Ready Link List, the left softkey

is labeled Go to. To switch to another contact list, press Go

to (left softkey), highlight your desired list, and press

ⅷ

PersonalList/PersonalGrps. contain your personal Ready

Link contact names and numbers, separately or in

groups. You can create and edit your own Personal List.

Your phone can store a total of 200 entries (you may

include up to five contacts per group).

ⅷ

Outgoing shows the last 10 different Ready Link calls you

placed.

Section 2K:Using Ready Link

205

ⅷ

Incoming shows the last 10 different Ready Link calls you

accepted.

Missed shows the last 10 Ready Link calls you missed.

Note: The icon next to the group name indicates a group.

Making a Ready Link Call

(One-to-One Call)

You can place a one-to-one Ready Link call by entering a

Ready Link number or by selecting a contact from the

Ready Link List.

ToplaceaReadyLinkcallbyselectingacontact:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight the list from which

you want to place a call (PersonalList, Outgoing,

Incoming, or Missed), and press

Tip: You can also select Enter R-Link# from the Go to option to enter a

Ready Link number directly. (See page 209 for details.)

3. Scroll to the contact you want to call, and press and

hold

to place the call and get the floor. (You will

see “R-Link calling...” and “Connecting...” followed by

“You have floor.” You can now begin speaking.)

– or –

Scroll to the contact you want to call and press and

release

to place the call. (The call will connect as

described above, but “Floor is open.” will appear on

the screen and either you or your contact may press

and hold

to take the floor and speak.)

206

Section 2K:Using Ready Link

Note: During a Ready Link call, the “floor” is the right to speak. When you

see “Floor is open.,” the first person to press the Ready Link/Memo button

can speak (while holding the button). Only the person who has the floor

can speak. The phone beeps if you press the Ready Link button when

another contact has the floor.

4. Continue holding

as you speak. (When you are

to allow the other

finished speaking, release

contact to speak.When the other party takes the floor,

you will see the speaker’s name and phone number

and the text “has floor.”)

5. When you are finished, press

Note: When neither party has the floor during a Ready Link call, “Floor is

open.” appears on the display. If no one takes the floor for 20 seconds, the

Ready Link call ends automatically.

Tip: If you press

during step 3, you can make a standard

voice call.

Section 2K:Using Ready Link

207

Making a Ready Link Call (Group Call)

You can make a Ready Link call to all members in a Group

entry, which you have in your Ready Link List. You can

communicate with up to five members at a time.

ToplaceaReadyLinkGroupcall:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight PersonalGrps., and

press

3. Scroll to the group you want to call, and press and

hold to place the call and take the floor. (You will

see “R-Link calling...” and “Connecting...” followed by

“You have floor.” Continue with the Ready Link call as

described previously.)

Ⅲ

To make a Ready Link call to a group member,

select your desired group, highlight your desired

group member, and press and hold

4. When the call is finished, press

Tip: The phone beeps if you press the Ready Link button when another

contact has the floor.

Tip: To redial your last Ready Link call, highlight Redial and press

from the Ready Link List.

208

Section 2K:Using Ready Link

Making a Ready Link Call by Entering a

Number

ToplaceaReadyLinkcallbyenteringanumber:

1. From standby mode, enter the Ready Link number you

want to dial.

2. Press

holding

to place the Ready Link call. Continue

to take the floor and speak.

3. Continue with the Ready Link call, pressing and

holding

to speak and releasing it to allow others

to reply.

4. When the call is finished, press

– or –

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight EnterR-Link# and

press

3. Enter the Ready Link number you want to dial.

4. Follow steps 2-4 above.

Note: Ready Link numbers must contain ten digits (area code + phone

number). Your Ready Link number is the same as your wireless phone

number.

Section 2K:Using Ready Link

209

Missed Call Notification for Ready Link Calls

When an incoming Ready Link call is not answered, the

Missed Call Notification and the icon are displayed on

your screen.

TocallthelastMissedReadyLinkcall:

ᮣ

Simply press

while the Missed Call Notification is

displayed. (Continue with the Ready Link call as

described previously.)

ToerasetheMissedCalllog:

ᮣ

Press Dismiss (right softkey).

Note: When you display Missed Calls entries, you will see the icon next

to the name. Once you confirm the entry by pressing

the icon. The icon will remain until you make or receive a Ready

Link call to or from the entry.

, the icon turns to

210

Section 2K:Using Ready Link

Receiving a Ready Link Call

ToreceiveaReadyLinkcall:

1. Make sure your phone’s Ready Link mode is enabled

(see “Setting Ready Link Mode” on page 202).

2. When you receive a Ready Link call from a contact, “R-

Link Call,” the contact’s name, and the Ready Link

number appear on the display. (You do not need to

take any action to answer the call.)

Ⅲ

When you receive a group call, “Group Call,” the

group member’s name, and the Ready Link

number appear.

3. If the person placing the call has kept the floor (held

the Ready Link/Memo button), you will see the

contact name and Ready Link number along with “has

floor,” and you will hear the caller speaking.

4. When the caller finishes speaking and releases

you will see “Floor is open.” on the display screen.

Press and hold

to take the floor and reply to the

caller. (You will see “You have floor.” and hear a tone

confirming that you may speak.)

5. When the conversation is finished, press

Tip: You can also receive a Ready Link call with the flip closed. Press and

hold the Ready Link button to take the floor when the floor is open.

Note: You can change the volume and the speaker setting during a

Ready Link call. Volume: Adjust the voice volume by using the Side Volume

key or by pressing the navigation key up or down except when you are

pressing and holding the Ready Link button. Speaker: Switch the speaker

on or off by pressing the Speaker button (

Section 2K:Using Ready Link

211

Ready Link Options

When you use Ready Link, several user options are available

by pressing Options (right softkey). To select an option,

highlight it and press

ⅷ

CopytoPersonal to copy a contact to the Personal List.

Edit to edit a Ready Link number and/or name.

ⅷ

SendMessage to send a text message, picture, or video.

CopytoPh. Book to copy a contact to the Contacts List.

Erase to erase a contact. EraseGroup appears when you

highlight a group.

ⅷ

AddContact to add a new contact. AddGroup appears

when you highlight a group list. (See page 215 for

details.)

ⅷ

EraseR-LinkList to erase all entries saved in the

Ready Link List.

Help to see the Ready Link instruction page.

212

Section 2K:Using Ready Link

Adding and Editing Ready Link

Contacts

Copying an Entry toYour Personal List or

Personal Group List

You can copy an entry to your Personal Lists from several

different sources. If the selected entry is already stored in

the Personal Lists, the “copy” option does not appear.

TocopyanentryfromtheReadyLinkList:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight the list from which

you want to copy an entry (PersonalGrps., Outgoing,

Incoming, or Missed), and press

3. Select the entry you want to copy and press Options

(right softkey). Highlight CopytoPersonal or

CopyGroup, and press

4. Press Yes (left softkey) to copy and save the entry to

your Personal List or Personal Group List.

Section 2K:Using Ready Link

213

Saving a Ready Link Number

You can save a Ready Link number from the ending display

to your Personal Lists.

Tosavethenumber:

1. From the end display, press Save (right softkey).

2. Enter a name and press OK (left softkey).

3. Press Save (left softkey).

4. Press Yes (left softkey).

Note: If the number is already stored in the Personal List or Personal

Groups, the “Save” softkey does not appear.

Finding an Entry in the Ready Link List

You can find your desired entry by entering a few letters.

TofindaReadyLinkentry:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight your desired list

(PersonalList or PersonalGrps.), and press

3. Enter the first letter or the first few letters of the name.

Ⅲ

The display shows the list beginning with the

letter(s) you entered.

4. Scroll through the list and press

to select your

desired entry.

214

Section 2K:Using Ready Link

Adding a New Contact toYour Personal List

You can store a total of 200 entries in the Personal Lists.

ToaddanewReadyLinkcontact:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight PersonalList, and

press

3. Highlight <AddContact> and press

4. Enter a name for the new contact and press

(This is the name you will see when calling or

receiving a call from the contact.)

5. Select R-LinkNumber, enter the contact’s 10-digit

Ready Link number (their wireless phone number)

and press OK (left softkey).

6. Press Save (left softkey) to save the new contact to

your Personal List.

Tip: You are not allowed to use the following symbols during step 4:

@ : ; / * ) (.

Section 2K:Using Ready Link

215

Adding a New Group toYour Personal

Group List

You can add new groups to the Personal Group List. Each

group can include up to five members. You can enter a

group member directly or select the member from the

Personal List.

ToaddanewReadyLinkgroupentry:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight PersonalGrps., and

press

3. Highlight <AddGroup> and press

4. Enter a Group Name, press , and press Next (left

softkey).

5. To add contacts to the group, press Add (right

softkey).

6. Highlight one item from the following and press

Ⅲ

New to add a new contact. (See page 215 for

details.)

Ⅲ

fromPersonalto add a contact from your Personal

List.

216

Section 2K:Using Ready Link

7. Scroll to the contacts you want to add and press

Pick (right softkey) to include the entries.

8. Press Done (left softkey) when you are finished selecting

contacts, then press Update (left softkey) to update your

Personal Group List with the new group entry.

Tip: To add members directly, highlight <Add Members> and press

during step 5.

Editing a Contact inYour Personal List

ToeditaPersonalListcontact:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), highlight PersonalList, and

press

3. Scroll to the entry you want to edit and press Options

(right softkey).

4. Highlight Edit and press

5. Select the field you want to edit (Name or

R-LinkNumber), and press

6. Edit the entry, press OK (left softkey), and press Save

(left softkey) to save your changes.

Section 2K:Using Ready Link

217

Editing a Group inYour Personal Group List

Toeditagroupname:

1. Press R-Link (left softkey) or press

2. Press Goto (left softkey), then highlight PersonalGrps.

and press

3. Scroll to the group entry you want to edit and press

Options (right softkey).

4. Highlight Edit and press

5. Edit the group name and press OK (left softkey).

Tip: If you don’t need to edit the group name, press Next (left softkey)

during step 5 above and skip step 6.

6. Press Save (left softkey) to save your changes.

7. To edit a group member, scroll to the contact you

want to edit and press Options (right softkey).

Ⅲ

Edit to edit a group member’s name and phone

number.

Ⅲ

Erase to erase the group member.

Ⅲ

AddNew to add a new group member.

Ⅲ

Add(Personal) to add a new group member from

the Personal List.

Ⅲ

Details to display a group member’s information.

218

Section 2K:Using Ready Link

8. Highlight Edit and press

9. Select the field you want to edit (Name or

R-LinkNumber) and press

10. Edit the entry, press OK (left softkey), and press Save

(left softkey) to save your changes.

11. Press Update (left softkey) to update your Personal

Group List.

Section 2K:Using Ready Link

219

Erasing Ready Link List Entries

Erasing an Entry inYour Personal List or

Personal Group List

Toeraseacontactoragroup:

1. From the Ready Link List, press Goto (left softkey),

then highlight PersonalList or PersonalGrps. and press

2. Scroll to the entry you want to erase and press Options

(right softkey).

3. Highlight Erase and press

Ⅲ

EraseGroup appears when you select Personal

Grps.

4. Select Yes.

Toeraseagroupmember:

1. From the Ready Link List, press Goto (left softkey),

then highlight PersonalGrps. and press

2. Scroll to your desired group and press

to display

the group members.

3. Select the contact you want to erase and press Options

(right softkey).

4. Highlight Erase and press

5. Select Yes.

6. Press Update (left softkey) to update your Personal

Group List.

220

Section 2K:Using Ready Link

Erasing a Ready Link List

You can erase all entries saved in the Ready Link List.

ToeraseaReadyLinkList:

1. From the Ready Link List, press Options (right softkey).

2. Highlight EraseR-LinkList and press

3. Select your desired option and press

Ⅲ

Outgoing to erase all outgoing Ready Link calls.

Incoming to erase all incoming Ready Link calls.

Missed to erase all missed Ready Link calls.

Ⅲ

AllCallsto erase all Ready Link call history, except

redial.

Ⅲ

AllPersonalEnt to erase all entries in Personal List

and Personal Grps. You are prompted to enter

your 4-digit lock code.

4. Select Yes.

Tip: The Redial number will not be erased.

Updating Ready Link Lists

Updating the Personal List

ToupdateyourPersonalListmanuallythroughtheReady

Linkserver:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

4. Select ListUpdate (

ABC

Section 2K:Using Ready Link

221

Managing Ready Link Settings

Assigning Speed Dialing for Ready Link

Entries

ToassignSpeedDialingforReadyLinkentries:

1. Press

to access the main menu.

2. Select Contacts.

ABC

3. Select SpeedDial#s (

4. Select an unassigned number.

Ⅲ

When you highlight an assigned number and

press , you’ll be asked whether you want to

overwrite the assigned number. Select Yes or No,

or you can also select Reset to cancel the stored

speed dial.

5. Press Goto (left softkey), highlight the list from which

you want to set a speed dial (PersonalList or Personal

Grps.), and press

6. Select the contact.

– or –

Select the group and press , then highlight an

option and press

Ⅲ

Setas to assign the selected group as a speed dial.

Ⅲ

Details to display the group details. You can select

the group member from the group list.

222

Section 2K:Using Ready Link

TouseSpeedDialforaReadyLinkentry:

ᮣ

From standby mode, press the appropriate speed dial

key (locations 2-9) and press

Restarting the Ready Link Service

TorestarttheReadyLinkservice:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

TUV

4. Select Restart (

Setting Ready Link Guard

This feature enables you to display the warning message

when you cannot receive Ready Link calls. The warning

message will appear when you are launching a Web or Java

application or sending or uploading your pictures.

TosettheReadyLinkGuard:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

PQRS

4. Select R-LinkGuard (

). (A message will appear.)

5. Press OK (left softkey) to continue.

6. Select On. (Select Off to deactivate this feature.)

Section 2K:Using Ready Link

223

Setting RingerTypes for Ready Link Calls

Your SCP-8300 provides a variety of ringer types that allow

you to customize your ringer.

ToselectaringertypeforReadyLinkcalls:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

DEF

4. Select Sounds (

5. Select RingerType (

6. Select ReadyLinkCalls, R-LinkMissed, or

R-LinkFloorTone.

7. Scroll to your desired ringer type and press

Tip: You can change the ringer type in another way (see “Selecting Ringer

Types for Ready Link Calls” on page 49).

224

Section 2K:Using Ready Link

Setting an Alert Notification for

Ready Link Calls

Your phone can alert you with an audible tone when you

receive a Ready Link call.

TosetalertsforReadyLinkcalls:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

DEF

4. Select Sounds (

ABC

5. Select Alerts (

6. Select ReadyLinkCalls or R-LinkMissed.

7. Use the navigation key to select Once, RepeatAlert for

Ready Link Calls or Once, RepeatAlert, or Off for

R-Link Missed.

Tip: You can also set alerts using the Alerts menu (see “Alert Notification”

on page 54).

Section 2K:Using Ready Link

225

Setting the Speakerphone for Ready Link

Calls

You can set the speakerphone on or off when Ready Link

call is activated. By default, the speakerphone is set to on.

Tosetthespeakerphoneonoroff:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

GHI

4. Select Speakerphone (

5. Select On or Off.

Note: If the phone’s ringer volume is set to Vibrate, Ringer off, or Silence All,

the speakerphone turns off. Press

to turn the speakerphone mode on.

226

Section 2K:Using Ready Link

Setting the DefaultView of the

Ready Link List

You can select the default Ready Link List when Ready Link

is launched.

ToselectthedefaultviewoftheReadyLinkList:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

JKL

4. Select DefaultView (

). (The default setting is

PersonalList.)

5. Select your desired list.

Setting the Floor Display of the

Ready Link Calls

With this feature, you can select the floor display during

Ready Link calls.

Toselectthefloordisplay:

1. Press

to access the main menu.

2. Select Settings.

GHI

3. Select ReadyLink (

MNO

4. Select FloorDisplay (

5. Select your desired display.

Section 2K:Using Ready Link

227

228

Section 2L

Using Your Phone’s Built-In

Media Player

In This Section

ࡗ

YourMultimediaChannelOptions

AccessingYourMediaPlayer’sChannelListings

PlayingaVideoorAudioClip

MultimediaFAQs

Yourwirelessphone’sbuilt-inmediaplayergivesyouthe

abilitytolistentoaudioclipsandviewvideoclipsrightfrom

yourphone’sdisplay. It’s a great way to stay up-to-date with

news, weather, and sports information while also

enjoying the latest blockbuster movie trailers or music

videos – anywhere, anytime on the network available to

you. Just access your media player from your phone’s

main menu, scroll to your choice of channel, and select

one of the videos or audio clips to play. It’s like having a

TV in the palm of your hand.

This section explains the features and options of your

phone’s built-in media player.

Section 2L:UsingYour Phone’s Built-in Media Player

229

Your Multimedia Channel Options

Multimedia Service offers a variety of accessible audio or

video channels, depending on your service plan and

multimedia subscriptions. Your subscription options

include a comprehensive basic service as well as a full

menu of a variety of additional channel options.

ⅷ

PreviewChannel: This free channel lets you sample clips

from all of the available channels before you make a

decision to subscribe. It’s like viewing the movie

preview before deciding whether you want to spend

the money to go see the full motion picture.

ⅷ

SprintTV: This comprehensive basic service gives you

access to a variety of content from familiar brands.

Think of it as “basic cable” for your phone. It allows you

unlimited access to this content as long as you continue

to pay the monthly subscription fee.

ⅷ

AvailableIndividualChannelOptions:You also have the

option of subscribing to individual channels from an

extensive menu offering. These channels are available

for a monthly subscription fee and allow you unlimited

access as long as you continue to pay your monthly

subscription fee.

230

Section 2L:UsingYour Phone’s Built-in Media Player

AccessingYour Media Player’s

Channel Listings

It’s easy to access and view the multimedia Channel Listings

on your SCP-8300 by Sanyo from the phone’s main menu.

ToaccessyourmediaplayerandChannelListings:

1. Press

from standby mode to display the phone’s

main menu.

2. Select MediaPlayer. Your Channel Listings will display,

divided into the following two sections:

Ⅲ

MyChannels: These include the complimentary

Previews channel that Sprint provides, as well as

any available individual channels for which you

have purchased access. If you have purchased

Sprint TV, either through a Sprint TV Vision Plan

subscription or by purchasing it separately, it will

be displayed here.

Ⅲ

AvailableChannels: These are channels that have

not yet been purchased but are available to access

for a monthly subscription fee. Use your

navigation key to scroll through and select a

channel, and follow the onscreen instructions to

purchase access to it. Upon purchasing access to

one of these channels, the channel will be listed,

along with its corresponding channel number, in

the MyChannels section of your media player’s

Channel Listings. You will see it displayed in this

section the next time you access your phone’s

media player.

Section 2L:UsingYour Phone’s Built-in Media Player

231

Playing aVideo orAudio Clip

Toselectandplayamediaclip:

1. Press

from standby mode to display the phone’s

main menu.

2. Select MediaPlayer and press to display your

Channel Listings.

3. Use your keypad to enter a channel number (or use your

navigation key to scroll to a channel and press ).

Ⅲ

MyChannels: If you have selected a channel that

you’ve already signed up for (or if it’s a channel with

no monthly fee), you will see a list of available clips.

Ⅲ

AvailableChannels: Ifyouhaveselectedachannel

youhavenotyetsignedupfor, youwillbeprompted

toacceptthecorrespondingmonthlycharge. Follow

theonscreenpromptstosubscribetotheselected

channel. (Alistofavailableclipswilldisplay.)

4. Scroll to the clip you would like to play and press

Select (left softkey) or . (The clip will automatically

load and begin playing.)

Tip: When entering the specific channel number, channels 01 - 09 do not

require you to enter a “0.” For example, to access channel “07,” just press

the “7” key.

232

Section 2L:UsingYour Phone’s Built-in Media Player

Multimedia FAQs

1. Howdoesmyphone’sMultimediaServicedifferfrom

VideoMail?

Multimedia Service lets you access high-quality video

and audio clips provided by external sources. Video

Mail lets you capture, upload and share videos that

you personally create with your phone’s built-in

camcorder.

2. HowamIchargedforMultimediaService?

SprintPCSVisionPlan:

Ⅲ

With a Sprint PCS Vision Plan, you can play an

unlimited number of video/audio clips on your

phone’s display as long as you’ve subscribed to

a channel (see next bullet). You also receive

access to the Previews channel as a courtesy

from Sprint. It doesn’t cost you anything to play

the clips, but you will need to pay a monthly fee

for any channel subscriptions (see below).

Ⅲ

In addition to complimentary access to the

Previews channel, you can subscribe to any of

the channels listed in the Available Channels

section of your Channel Listings for an

additional monthly fee. Clips within these

channels will continue to be available to you as

long as you continue to pay your monthly

channel subscription fee.

Section 2L:UsingYour Phone’s Built-in Media Player

233

3. WillIknowifI’mreceivinganincomingcallwhileI’m

viewingorlisteningtoanaudioclip?

No. All incoming calls will roll into voicemail while

you are playing a clip. If the caller leaves a voicemail,

the voicemail icon will appear on the screen.

4. Howlongaretheclips?WillIknowtheestimatedtimeit

willtaketoplaytheclippriortoaccessingit?

Once you have selected a channel, you will see a

listing of the available clips, with the clip’s length

appearing after the clip’s title. In general, a clip’s

duration will depend on the story or content being

provided, and can be fairly short or as long as a few

minutes.

5. CanIaccessamultimediaclipwhereverIam, aslongasI

havemyphone?

As long as you are on the network available to you, you

will have access to the audio and video clips.

Note: Multimedia Service does not work while roaming off of the network

available to you or where service is unavailable.

6. ArethevideosthatI’mviewing“live”videos?

Yes, depending on the provider. Some, such as

FOX News Channel Live through Sprint TV, stream

live content. Others provide media on demand with

video and audio clips that are refreshed throughout

the day, but that are not “live.”

234

Section 2L:UsingYour Phone’s Built-in Media Player

7. AfterpurchasingaccesstoanAvailableChannelfora

monthlyfee, doIreceiveanyconfirmation?Thatis, howdoI

knowithasbeenpurchased?

The next time you access your media player’s Channel

Listings, the purchased channel title and

corresponding number will appear in the My

Channels section.

8. Whyaresomechannelsalreadypre-loadedintothe

MyChannelssection?

Some channels, such as Previews, are offered free of

charge as a customer courtesy. These channels

automatically appear in the My Channels section of

your Channel Listings.

9. IfIdon’tsubscribetoaSprintPCSVisionPlan, amIstillable

toviewthemultimediaclips?

No.

10. HowcanIeasilyaccessachannelwithouthavingtoscroll

throughallthechannelsinmyChannelListings?

Each channel will have a number to the left of it. You

can simply press this number to quickly access the

clips located within that channel.

Tip: When entering the specific channel number, channels 01 - 09 do not

require you to enter a “0.” For example, to access channel “07,” just press

the “7” key.

11. WhatdoesitmeanwhenthevideopausesandIseethe

word“loading”atthebottomofthescreen?

This happens when the media player is in the process

of loading the data necessary to play the clip. It

Section 2L:UsingYour Phone’s Built-in Media Player

235

typically occurs when there is heavy traffic on the

network.

12. HowcanIcancelserviceifIdecideIdon’twantit?

To cancel your Multimedia Service, contact your

service provider.

13. IfIplacemystereoheadphonesonandinsertthemintothe

phone’sheadsetjack, canIclosetheflipwhileIamplaying

anaudio(orvideo)clipwithoutinterruptingtheclip?

Yes. When you insert your stereo headset into the

phone’s headset jack, the phone automatically goes

into “headset mode,” allowing you to close the flip

and continue playing the clip (likewise, if your phone

is in “headset mode,” a phone call will not become

disconnected by closing the flip).

14. CanIsurftoadifferentchannelwhileIamplayingaclip?

Yes; while you are playing a clip, you can use the up

and down navigation buttons to surf to a different

channel. A small pop-up screen will appear that tells

you which channel you are watching as well as other

channels you have access to. Use the navigation

buttons to scroll through the different channels. Once

you find a channel that you want to watch, scroll to it

and press

(or simply wait approximately three

seconds) and the channel will begin loading.

236

Section 2L:UsingYour Phone’s Built-in Media Player

Section 3

Qwest Service Features

238

Section 3A

Qwest Service Features:

The Basics

In This Section

ࡗ

UsingVoicemail

UsingSMSTextMessaging

UsingCallerID

RespondingtoCallWaiting

MakingaThree-WayCall

UsingCallForwarding

Nowthatyou’vemasteredyourphone’sfundamentals, it’stime

toexplorethecallingfeaturesthatenhanceyourwireless

service. This section outlines your basic Qwest Service

features.

Section 3A:Qwest Service Features –The Basics

239

UsingVoicemail

Setting UpYour Voicemail

All unanswered calls to your wireless phone are

automatically transferred to your voicemail, even if your

phone is in use or turned off. Therefore, you will want to set

up your voicemail and personal greeting as soon as your

phone is activated.

Tosetupyourvoicemail:

1. Press and hold

2. Follow the system prompts to:

Ⅲ

Create your passcode

Ⅲ

Record your greeting

Ⅲ

Record your name announcement

Ⅲ

Choose whether or not to activate One-Touch

Message Access (a feature that lets you access

messages simply by pressing and holding

bypassing the need for you to enter your

passcode).

Voicemail Notification

There are several ways your phone alerts you of a new

message:

ⅷ

By displaying a message on the screen.

ⅷ

By sounding the assigned ringer type.

ⅷ

By the LED blinking red.

ⅷ

By displaying

at the top of your screen.

240

Section 3A:Qwest Service Features –The Basics

NewVoicemail MessageAlerts

When you receive a new voice message, your phone alerts

you and prompts you to call your voicemail.

Tocallyourvoicemail:

ᮣ

Press

To display your Missed Log:

ᮣ

Press Events (right softkey).

Important: When you are roaming off the network available to you, you

may not receive notification of new voicemail messages. It is

recommended that you periodically check your voicemail by dialing

1 + area code + your wireless phone number. When your voicemail

Shift

answers, press

and enter your passcode. You will be charged

roaming rates when accessing voicemail while roaming off the network

available to you.

Note: Your phone accepts messages even when it is turned off. However,

you are only notified of new messages when your phone is turned on. You

may not receive new messages when roaming outside of the network

available to you.

Section 3A:Qwest Service Features –The Basics

241

RetrievingYourVoicemail Messages

You can review your messages directly from your SCP-8300

or from any other touch-tone phone. To dial from your

wireless phone, you can either speed dial your voicemail or

use the menu keys.

UsingOne-TouchMessageAccess

ᮣ

Press and hold

voicemail box.)

. (Your phone will dial your

UsingtheMenuKeysonYourPhonetoAccessYour

Messages

1. Press

to access the main menu.

2. Select Messaging.

MNO

3. Select Voicemail(

ABC

4. Select CallVoicemail (

to listen to your messages.

) or Call:SpeakerOn (

)

Note: You are charged for airtime minutes when you are accessing your

voicemail from your wireless phone.

UsingaPhoneOtherThanYourWirelessPhoneto

AccessMessages

1. Dial your wireless phone number.

Shift

2. When your voicemail answers, press

3. Enter your passcode.

Tip: When you call into voicemail, you first hear the header information

(date, time, and sender information) for the message. To skip directly to the

GHI

message, press

during the header.

242

Section 3A:Qwest Service Features –The Basics

VoicemailButtonGuide

Here’s a quick guide to your keypad functions while

listening to voicemail messages. For further details and

menu options, see “Voicemail Menu Key” on page 247.

ABC

DEF

Date/Time Send Reply Advance

GHI

JKL

MNO

Replay

Rewind

Forward

PQRS

TUV

WXYZ

Erase

Call Back

Save

Space

Shift

Cancel

Help

Skip

Section 3A:Qwest Service Features –The Basics

243

Voicemail Options

Your phone offers several options for organizing and

accessing your voicemail.

UsingExpertMode

Using the Expert Mode setting for your personal voicemail

box helps you navigate through the voicemail system more

quickly by shortening the voice prompts you hear at each

level.

ToturnExpertModeonoroff:

1. Press and hold

to access your voicemail. (If your

voicemail box contains any new or saved messages,

Shift

press

to access the main voicemail menu.)

DEF

2. Press

to change your Personal Options,

following the system prompts.

GHI

3. Press

4. Press

for Expert Mode.

to turn Expert Mode on or off.

SettingUpGroupDistributionLists

Create up to 20 separate group lists, each with up to 20

customers.

1. Press and hold

to access your voicemail. (If your

voicemail box contains any new or saved messages,

Shift

press

to access the main voicemail menu.)

DEF

2. Press

to change your Personal Options,

following the system prompts.

ABC

3. Press

for Administrative Options.

244

Section 3A:Qwest Service Features –The Basics

JKL

4. Press

for Group Distribution Lists.

5. Follow the voice prompts to create, edit, rename, or

delete group lists.

Callback

Return a call after listening to a message without

disconnecting from voicemail.

TUV

ᮣ

Press

after listening to a message. (Once the call

is complete, you’re returned to the voicemail main

menu.)

Voicemail-to-VoicemailMessage

Record and send a voice message to other voicemail users.

ABC

1. From the main voicemail menu, press

to send a

message.

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record and send your

voice message.

Voicemail-to-VoicemailMessageReply

Reply to a voice message received from any other

voicemail user.

ABC

1. After listening to a voice message, press

2. Follow the voice prompts to record and send your

reply.

Section 3A:Qwest Service Features –The Basics

245

Voicemail-to-VoicemailMessageForwarding

Forward a voice message, except those marked “Private,” to

other voicemail users.

MNO

1. After listening to a message, press

2. Follow the voice prompts to enter the phone number.

3. Follow the voice prompts to record your introduction

and forward the voice message.

ContinueRecording

When leaving a voice message, you can choose to continue

recording even after you’ve stopped.

ᮣ

Before pressing

to indicate that you are satisfied

GHI

with the message you recorded, press

continue recording.

ExtendedAbsenceGreeting

When your phone is turned off or you are off the network

available to you for an extended period, this greeting can be

played instead of your normal personal greeting.

DEF

1. From the main voicemail menu, press

for

Personal Options.

DEF

2. Press

for Greetings.

to record an Extended Absence Greeting.

DEF

3. Press

246

Section 3A:Qwest Service Features –The Basics

Clearing the Message Icon

Your phone may temporarily continue to display the

message icon after you have checked your voice and text

messages.

Tocleartheiconfromthedisplayscreen:

1. Press

to access the main menu.

2. Select Messaging.

MNO

3. Select Voicemail(

GHI

4. Select ClearCount(

5. Select Yes.

Voicemail Menu Key

Following the prompts on the voicemail system, you can

use your keypad to navigate through the voicemail menu.

The following list outlines your phone’s voicemail menu

structure.

Listen

Envelope Information

Advance 8 Seconds

Replay

Rewind

Forward Message

ABC

DEF

GHI

JKL

MNO

PQRS

Erase

TUV

Callback

WXYZ

Save

Options

ABC

Send a Message

Section 3A:Qwest Service Features –The Basics

247

DEF

Personal Options

Notification Options

Phone Notification

Numeric Paging to a Wireless Phone

Return to Personal Options Menu

ABC

Shift

ABC

Administrative Options

Skip Passcode

ABC

Autoplay

DEF

Message Date & Time On/Off

Change Passcode

Group Distribution List

GHI

JKL

Shift

Return to Personal Options Menu

DEF

Greetings

Personal Greetings

Name Announcement

Extended Absence Greeting

ABC

DEF

Shift

Return to Personal Options Menu

GHI

Expert Mode (On/Off)

TUV

Shift

Place a Call

Disconnect

248

Section 3A:Qwest Service Features –The Basics

Using SMSText Messaging

With SMS Text Messaging, you can use a person’s wireless

phone number to send instant text messages from your

wireless phone to their messaging-ready phone – and they

can send messages to you. When you receive a new

message, it will automatically display on your phone’s

screen. (See “Displaying Pop-up Messages” on page 67.)

In addition, SMS Text Messaging includes a variety of pre-set

messages, such as “Can’t talk right now. Send me a message.”

that make composing messages fast and easy. You can also

customize your own pre-set messages (up to 50 characters)

from your wireless phone.

Displaying aText Message

Todisplayatextmessagefromthemainmenu:

1. Press

to access the main menu.

2. Select Messaging.

DEF

3. Select TextMsgs (

4. Select Inbox, Sent, Outbox, Drafts, or your defined

folder and press . ( indicates an unread message.)

5. Highlight the message you want to display and

press . (To display the message options, press

Options [right softkey].)

Section 3A:Qwest Service Features –The Basics

249

Composing SMSText Messages

TocomposeanSMSTextmessage:

1. Press

to access the main menu.

2. Select Messaging.

3. Select SendMessage (

4. Select Text and select the entry method you prefer:

Ⅲ

PhoneBookEntry to select a recipient from your

Contacts list. (qualifying Phone Book entries must

contain a wireless phone number or an email

address).

Ⅲ

PersonalListEnt. to select a recipient from your

personal list.

Ⅲ

PersonalGrps. Ent. to select a recipient from your

personal group list.

Ⅲ

MobilePhone# to use the keypad to enter the

wireless phone number of the person to whom

you wish to send a message.

Ⅲ

EmailAddress to enter the recipient’s email address.

Ⅲ

FromRecentList to select recipients from a list of

recent message recipients.

5. Press

to select the recipient. (To include additional

recipients, highlight <AddEntry> and press . You

may include up to 10 recipients per message.)

6. Press Done (left softkey) when you are finished

selecting and entering recipients, then press

Next (left softkey).

250

Section 3A:Qwest Service Features –The Basics

7. Select Message and compose a message or use the

canned (pre-set) messages or smileys (icons).

Ⅲ

Press Mode (right softkey) for different character

input mode. (See “Entering Text” on page 41.)

8. To set the message priority, scroll to Priority and

press

9. Select Ordinary or Urgent and press

10. Review your message and press Send (left softkey).

(You may also select additional messaging options by

pressing Options [right softkey] to set the callback

number or change the recipients, etc.)

Accessing SMSText Messages

ToreadanSMSTextmessage:

ᮣ

When you receive a text message, it will automatically

appear on your phone’s main display screen. Press

View (left softkey) to read the message. Use your

navigation key to scroll down and view the entire

message.

ToreplytoanSMSTextmessage:

1. While the message is open, select Reply (left softkey).

2. Compose your reply or press Mode (right softkey) to

select a character input mode. (See “Entering Text” on

page 41.)

3. Review your reply and press Send (left softkey).

Section 3A:Qwest Service Features –The Basics

251

Using Canned (Pre-set) Messages

Pre-set messages make sending text messages to your

friends, family, and co-workers easier than ever.

Toaddand/oreditPre-SetMessages:

1. Press

to access the main menu.

2. Select Settings.

PQRS

3. Select Messaging (

ABC

4. Select PresetMsgs (

5. Highlight a message you wish to edit and press

6. Enter your new message or changes and press

OK (left softkey). (See “Entering Text” on page 41.)

Ⅲ

To reset all messages, press Options (right softkey),

highlight ResetAllMsgs and press

during step 5

above.

252

Section 3A:Qwest Service Features –The Basics

Using Caller ID

Caller ID allows people to identify a caller before answering

the phone by displaying the number of the incoming call. If

you do not want your number displayed when you make a

call, just follow these easy steps.

Toblockyourphonenumberfrombeingdisplayedfora

specificoutgoingcall:

MNO

Shift

PQRS

1. Press

2. Enter the number you want to call.

3. Press

To permanently block your number, call Qwest Wireless

Repair at 1-877-879-0611.

Responding to CallWaiting

When you’re on a call, Call Waiting alerts you of incoming

calls by sounding beeps. Your phone’s screen informs you

that another call is coming in and displays the caller’s

phone number (if it is available).

Torespondtoanincomingcallwhileyou’reonacall:

ᮣ

Press

. (This puts the first caller on hold and

answers the second call.)

Toswitchbacktothefirstcaller:

ᮣ

Press

again.

Tip: For those calls where you don’t want to be interrupted, you can

Shift

PQRS

temporarily disable Call Waiting by pressing

before

placing your call. Call Waiting is automatically reactivated once you end

the call.

Section 3A:Qwest Service Features –The Basics

253

Making a Three-Way Call

With Three-Way Calling, you can talk to two people at the

same time. When using this feature, the normal airtime

rates will be charged for each of the two calls.

TomakeaThree-WayCall:

1. Enter a number you wish to call and press

2. Once you have established the connection,

press

3. Dial the second number you wish to call and

press

4. When you’re connected to the second party,

press again to begin your three-way call.

. (This puts the first caller on hold.)

If one of the people you called hangs up during your call,

you and the remaining caller stay connected. If you initiated

the call and are the first to hang up, all three callers are

disconnected.

Note: Call Waiting and Three-Way Calling are not available while roaming

off the network available to you.

254

Section 3A:Qwest Service Features –The Basics

Using Call Forwarding

Call Forwarding lets you forward all your incoming calls to

another phone number – even when your phone is turned

off. You can continue to make calls from your phone when

Call Forwarding is activated.

ToactivateCallForwarding:

ABC

Shift

PQRS

1. Press

2. Enter the area code and phone number to which your

future calls should be forwarded.

3. Press

. (You will hear a tone to confirm the

activation of Call Forwarding.)

TodeactivateCallForwarding:

ABC

Shift

PQRS

1. Press

2. Press

. (You will hear a tone to confirm the

deactivation.)

Note: You are charged a higher rate for calls you have forwarded.

Section 3A:Qwest Service Features –The Basics

255

256

Section 3B

Sprint PCS Vision^SM

In This Section

ࡗ

GettingStartedWithSprintPCSVision

AccessingMessaging

DownloadingPremiumServicesContent

ExploringtheWeb

SprintPCSVisionFAQs

SprintPCS Vision bringsyouclarityyoucanseeandhear

withadvancedmultimediaservices. These features –

including Messaging, games, downloadable ringers and

screen savers, and portable Web access – are easy to learn

and use. Clearly, it’s a whole new way to look at wireless.

This section introduces these advanced services and

walks you through the necessary steps to start taking

advantage of Sprint PCS Vision Services.

Section 3B:Sprint PCSVision

257

Getting StartedWith Sprint PCSVision

With your SCP-8300 by Sanyo and wireless service from

Qwest, you are ready to start enjoying the advantages of

Sprint PCS Vision. This section will help you learn the

basics of using your Sprint PCS Vision services, including

managing your user name, launching a Vision connection,

and navigating the Web with your phone.

Your User Name

When you buy a compatible phone and sign up for service,

you’re automatically assigned a user name, which is

typically your 10-digit wireless phone number followed by

“@qwest.sprintpcs.com.” For example, if your phone

number is 555-123-4567, your user name will be

[email protected].

When you use Sprint PCS Vision services, your user name is

submitted to identify you to the network available to you.

The user name is also useful as an address for email, as a way

to personalize Web services, and as an online virtual

identity.

Your user name will be automatically programmed into

your phone. You don’t have to enter it.

FindingYourUserName

If you aren’t sure what your Sprint PCS Vision user name is,

you can easily find it on your phone.

Tofindyourusername:

ᮣ

From standby mode, go to Menu > Settings > PhoneInfo

> Phone#/UserID.

258

Section 3B:Sprint PCSVision

Launching a Sprint PCSVision Connection

TolaunchaSprintPCSVisionconnection:

1. Press

to access the main menu.

2. Select Web. (Your Sprint PCS Vision connection will

launch and the Sprint PCS Vision home page will

display.)

The Sprint PCSVision Home Page

Shortcut: You can also press Web (right softkey) to launch the Web in

standby mode.

Note: If Net Guard is enabled and displayed (see page 260), press OK (left

softkey) to continue and launch the Web.

While connecting, the following will appear on the screen:

Connecting... Pleasewait.

If you had a previous Sprint PCS Vision connection, the last

page you visited will display when you launch your

browser. When this occurs, you may not see the

“Connecting...” message when you launch the session.

Section 3B:Sprint PCSVision

259

Though the browser is open, you are not currently in an

active data session - that is, no data is being sent or received.

As soon as you navigate to another page, the active session

will launch and you will see the “Connecting...” message.

Net Guard

When you first connect to the Web, the Net Guard will

appear to confirm that you want to connect. This feature

helps you avoid accidental connections. You can disable

the Net Guard in the future by selecting AlwaysAuto-Connect

when the Net Guard is displayed.

TochangeyourNetGuardsettings:

1. Press

to access the main menu.

2. Select Settings.

DEF

3. Select PCSVision (

ABC

4. Select NetGuard (

) and choose an option:

Ⅲ

Onto activate the Net Guard.

Ⅲ

Off to deactivate the Net Guard.

Note: When enabled, the Net Guard appears only once per session. The

Net Guard does not appear if the phone is merely re-connecting due to a

time-out.

260

Section 3B:Sprint PCSVision

Sprint PCSVision Connection Status and

Indicators

Your phone’s display lets you know the current status of

your Sprint PCS Vision connection through indicators

which appear at the top of the screen. The following

symbols are used:

Your Sprint PCS Vision connection is active (data is

being transferred); the transmit/receive symbol will

blink to indicate data transmission. Incoming voice

calls go directly to voicemail; outgoing voice calls can

be made, but the Sprint PCS Vision connection will

terminate.

Your Sprint PCS Vision connection is dormant (no data

is being sent or received). Though not currently

active, when dormant the phone can restart an active

connection quickly; voice calls can be made and

received.

Your phone is not currently able to access Sprint PCS

Vision service features.

If no indicator appears, your phone does not have a current

Sprint PCS Vision connection. To launch a connection, see

“Launching a Sprint PCS Vision Connection” on page 259.

Section 3B:Sprint PCSVision

261

Navigating the Web

Navigating through menus and Web sites during a

Sprint PCS Vision session is easy once you’ve learned a few

basics. Here are some tips for getting around:

Softkeys

During a Sprint PCS Vision session, the bottom line of your

phone’s display contains one or more softkeys. These keys

are shortcut controls for navigating around the Web, and

they correspond to the softkey buttons directly below the

phone’s display screen.

Tip: Depending on which Web sites you visit, the labels on the softkeys

may change to indicate their function.

Tousesoftkeys:

ᮣ

Press the desired softkey button. (If an additional

pop-up menu appears when you press the softkey

button, select the menu items using your keypad [if

they’re numbered] or by highlighting the option and

pressing .)

Scrolling

As with other parts of your phone’s menu, you’ll have to

scroll up and down to see everything on some Web sites.

ToscrolllinebylinethroughWebsites:

ᮣ

Press the navigation key up and down.

ToscrollpagebypagethroughWebsites:

ᮣ

Press the volume buttons on the side of the phone.

262

Section 3B:Sprint PCSVision

Selecting

Once you’ve learned how to use softkeys and scroll, you

can start navigating the Web.

Toselecton-screenitems:

ᮣ

Use the navigation key to highlight the desired item,

then press the desired softkey button (or press

Tip: You’ll find that the left softkey is used primarily for selecting items.

This softkey is often labeled “Go.”

Tip: If the items on a page are numbered, you can use your keypad

(number keys) to select an item. (The tenth item in a numbered list may be

selected by pressing the

key on your phone’s keypad, even though

the number 0 doesn’t appear on the screen.)

Links, which appear as underlined text, allow you to jump

to different Web pages, select special functions, or even

place phone calls.

Toselectlinks:

ᮣ

Highlight the link and press the appropriate softkey.

GoingBack

Togobackonepage:

ᮣ

Press the

key on your phone.

Note: The BACK key is also used for deleting text (like a BACKSPACE key)

when you are entering text.

Section 3B:Sprint PCSVision

263

GoingHome

ToreturntotheSprintPCSVisionhomepagefromany

otherWebpage:

ᮣ

Press and hold

– or –

Press (right softkey) and select Home (

Messaging

Accessing Messaging

Now you can send and receive emails and text messages

and participate in Web-based chatrooms right from your

phone. Messaging allows you to stay connected to friends,

family, and co-workers 24 hours a day anywhere on the

network available to you.

MessageTypes

There are many types of text messaging available on your

phone. These include SMS Text Messaging (page 249),

Instant Messaging, Email, and Chat.

(Voicemail provides voicemail-to-mailbox messaging. For

information on using your phone’s voicemail feature, see

“Using Voicemail” on page 240.)

264

Section 3B:Sprint PCSVision

Accessing Email Providers

With Sprint PCS Vision, you can use popular email services

such as AOL Mail, Yahoo! Mail, MSN Hotmail and

EarthLink to keep in touch, even while you’re on the go.

Toaccessemailprovidersfromyourphone:

1. From the Sprint PCS Vision home page, select

Messaging.

2. Select Email.

3. Select an email provider, such as AOLMail, MSN

Hotmail, Yahoo!Email, or Earthlink.

4. Use your keypad to enter the required sign in

information for the selected provider, such as user

name, email address, and/or password, and select

SignIn. (Your mailbox for the selected provider will

display.)

Note: The information required for sign in will vary depending on the email

provider you are accessing.

5. Follow the onscreen instructions to read, reply to,

compose, send, and manage your email account.

Section 3B:Sprint PCSVision

265

Accessing Instant Messaging

Sprint PCS Vision also provides you with access to popular

instant messaging (IM) clients, including AOL Instant

Messenger , MSN Messenger, and Yahoo! Messenger.

Toaccessinstantmessagingclientsfromyourphone:

1. From the Sprint PCS Vision home page, select

Messaging.

2. SelectInstantMessaging.

3. Select an email provider, such as AOLInstant

Messenger,MSNMessenger, or Yahoo!Messenger.

4. Use your keypad to enter the required sign in

information for the selected provider, such as user

name and/or password, and select SignIn. (Your IM

screen for the selected provider will display.)

Note: The information required for sign in will vary depending on the

instant messaging provider you are accessing.

5. Follow the onscreen instructions to read, reply to,

compose, send, and manage your IM account.

266

Section 3B:Sprint PCSVision

AccessingWireless Chatrooms

Sprint PCS Vision gives you the ability to join wireless

chatrooms from your phone, to send text messages and

icons to chatroom participants, or to launch a one-on-one

(private) chatroom.

Toaccessachatroomfromthebrowser:

1. From standby mode, press Web (right softkey) to

launch the browser.

2. Select Messaging.

3. Select Chat.

4. Select Enter. (You will see a disclaimer for Wireless

Chat.)

5. PressGo (left softkey) to accept the disclaimer.

6. Use your keypad to enter a nickname and select Enter.

(The chat menu will display.)

7. Select a chatroom from the menu (for example,

“Friends” or “Singles”) and press Go (left softkey) to

enter.

8. Once in the chatroom, you may scroll through the

postings to read messages from other chatroom

participants and use your keypad to enter your own

messages.

Tip: To avoid inadvertent data charges, you should sign out of chatrooms

when you are ready to exit.

Note: For information about posting to chatrooms or setting up one-on-

one sessions, please see the Sprint PCS Vision User’s Guide at

www.qwestwireless.com.

Section 3B:Sprint PCSVision

267

Downloading Premium Services

Content

With Sprint PCS Vision and your new SCP-8300 by Sanyo,

you have access to a dynamic variety of Premium Service

content, such as downloadable Games, Ringers, Screen

Savers, and other applications. (Additional charges may

apply.) The basic steps required to access and download

Premium Service content are outlined below.

AccessingtheDownloadMenus

ToaccesstheSprintPCSVisiondownloadmenus:

1. Press

to access the main menu.

2. Select Downloads.

3. Select the type of file you wish to download (Games,

Ringers,ScreenSavers, or Applications) and press

4. Select GetNewand press . (The browser will launch

and take you to the corresponding download menu.)

ToaccesstheSprintPCSVisiondownloadmenusfromthe

Webbrowser:

1. From the Sprint PCS Vision home page, select

ABC

Downloads (

ABC

2. Select Games (

), Ringers (

), ScreenSavers

DEF

GHI

(

), or Applications (

) to go to the

corresponding download menu. (For more

information on navigating the Web, see “Navigating

the Web” on page 262.)

268

Section 3B:Sprint PCSVision

SelectinganItemtoDownload

You can search for available items to download in a number

of ways:

ⅷ

Featured displays a rotating selection of featured items.

ⅷ

Categories allows you to narrow your search to a general

category, such as Movie/TV Themes for Ringers or

College Logos for Screen Savers. (There may be several

pages of available content in a list. Select Next9 to view

additional items.)

ⅷ

Search allows you to use your keypad to enter search

criteria to locate an item. You may enter an entire word

or title or perform a partial-word search (for example,

entering “goo” returns “Good Ol’ Boy,” “The Good, the

Bad, and the Ugly,” and “Goofy - Club”).

DownloadinganItem

Once you’ve selected an item you wish to download,

highlight it and press

or press Go (left softkey). You will

see a summary page for the item including its title, the

vendor, the download detail, the file size, and the cost.

Links allow you to view the LicenseDetails page, which

outlines the price, license type, and length of license for the

download, and the TermsofUse page, which details the

Premium Services Terms of Use and your responsibility for

payment.

Todownloadaselecteditem:

1. From the information page, select Buy. (The item will

download automatically. When the NewDownload

screen appears, the item has been successfully

downloaded to your phone.)

Section 3B:Sprint PCSVision

269

Note: If you have not previously purchased an item, you will be prompted

to create your purchasing profile.

2. Select an option to continue:

Ⅲ

Once the item has been successfully downloaded

and the Completed screen appears, select your

desired option to assign the ringer or screen saver,

run the application, listen to music, play the game,

etc.

Ⅲ

Press

to quit the browser and return to

standby mode.

270

Section 3B:Sprint PCSVision

Web

Exploring the Web

With Web access on your wireless phone, you can browse

full-color graphic versions of your favorite Web sites, making

it easier than ever to stay informed while on the go. Follow

sports scores and breaking news and weather and shop on

your phone anywhere on the network available to you.

In addition to the features already covered in this section,

the Sprint PCS Vision home page offers access to these

colorful, graphically rich Web categories, including News,

Weather, Entertainment, Sports, Finance, Travel, Shopping,

Tools, and BusinessLinks, as well as useful management

options including MyAccount and Search. Many sites are

available under more than one menu – choose the one

that’s most convenient for you.

Using the Browser Menu

Navigating the Web from your phone using the Sprint PCS

Vision home page is easy once you get the hang of it. For

details on how to navigate the Web, select menu items, and

more, see “Navigating the Web” on page 262.

Although the Sprint PCS Vision home page offers a broad and

convenient array of sites and services for you to browse, not

all sites are represented, and certain functions, such as going

directly to specific Web sites, are not available. For these and

other functions, you will need to use the browser menu. The

browser menu offers additional functionality to expand your

use of the Web on your SCP-8300.

Section 3B:Sprint PCSVision

271

OpeningtheBrowserMenu

The browser menu may be opened anytime you have an

active Sprint PCS Vision session, from any page you are

viewing.

Toopenthebrowsermenu:

ᮣ

Press (right softkey). (The browser menu will

display in a drop-down list.)

Options available under the browser menu include:

ⅷ

Home(

). Returns the browser to the Sprint PCS

Vision home page.

ABC

ⅷ

Forward(

). Returns you to a previously viewed page

(after having used the

key).

DEF

Markthispage(

current site and edit your bookmarks.

). Allows you to bookmark the

GHI

ViewBookmarks(

bookmarked sites.

JKL

). Allows you to view and access

ⅷ

Search(

). Launches a Google search.

MNO

ShowURL(

). Displays the URL (Web site address) of

the site you’re currently viewing.

ⅷ

PQRS

GotoURL... (

). Allows you to navigate directly to a

Web site by entering its URL (Web site address).

272

Section 3B:Sprint PCSVision

ⅷ

TUV

History(

). Keeps a list of links to your most recently

visited sites. To navigate to a site, highlight it and

press , then select Connect (left softkey).

ⅷ

WXYZ

Refreshthispage(

). Reloads the current Web page.

More... (

). Displays additional options:

Ⅲ

RestartBrowser. Refreshes the current browser

session.

Ⅲ

SendPage. Allows you to send the current URL as a

text message.

Preferences. Allows you to configure and manage

your browser settings. (Edit Home Page, Revert

Home Page, Font Size, Color Setting, Show Images,

Delete Cookies, Send Referrer, Title Tag, Sound

Volume, and About Browser.)

CreatingaBookmark

Bookmarks allow you to store the address of your favorite

Web sites for easy access at a later time.

Tocreateabookmark:

1. Go to the Web page you want to mark.

2. Press (right softkey) to open the browser menu.

DEF

3. Select Markthispage (

) and press OK (left softkey)

twice to save the bookmark.

Note: Bookmarking a page does not store the page contents, just its

address.

Note: Some pages cannot be bookmarked. Whether a particular Web

page may be marked is controlled by its creator.

Section 3B:Sprint PCSVision

273

AccessingaBookmark

Toaccessabookmark:

1. Press (right softkey) to open the browser menu.

GHI

2. Select ViewBookmarks (

3. Scroll to highlight the bookmark you’d like to access

and press OK (left softkey) to go to the Web site (or

press the number corresponding to the bookmark you

wish to access).

DeletingaBookmark

Todeleteabookmark:

1. Press (right softkey) to open the browser menu.

GHI

2. Select ViewBookmarks (

3. Scroll to highlight the bookmark you’d like to delete

and press (right softkey).

JKL

4. Select Delete(

) from the menu. (A confirmation

screen will display.)

5. Select Yes (right softkey) to remove the bookmark.

274

Section 3B:Sprint PCSVision

GoingtoaSpecificWebsite

TogotoaparticularWebsitebyenteringaURL(Website

address):

1. Press (right softkey) to open the browser menu.

PQRS

2. Select GotoURL... (

3. Select Address and press OK (left softkey).

4. Use your keypad to enter the URL of the Web site you

wish to go to and press

5. Press OK (left softkey) again to go to the Web site.

Note: Not all Web sites are viewable on your phone.

ReloadingaWebPage

Toreload(refresh)aWebpage:

1. Press (right softkey) to open the browser menu.

WXYZ

2. Select Refreshthispage (

). (The browser will

reload the current Web page.)

RestartingtheWebBrowser

If the Web browser appears to be malfunctioning or stops

responding, you can usually fix the problem by simply

restarting the browser.

TorestarttheWebbrowser:

1. Press (right softkey) to open the browser menu.

2. Select More... (

3. Select RestartBrowserand press OK (left softkey).

Section 3B:Sprint PCSVision

275

AdjustingtheBrowserSoundVolume

Toadjustthebrowsersoundvolume:

1. Press (right softkey) to open the browser menu.

2. Select More... (

3. Select Preferencesand press OK (left softkey).

4. Select SoundVolumeand press OK (left softkey).

5. Select your desired volume level by pressing the

navigation key up or down and press

276

Section 3B:Sprint PCSVision

Sprint PCSVision FAQs

HowwillIknowwhenmyphoneisreadyforSprintPCS

Visionservice?

Your user name (e.g., [phone number]@qwest.sprintpcs.com)

will display in the Phone#/UserID menu.

Go to Settings > PhoneInfo > Phone#/UserID.

HowdoIsign-inforthefirsttime?

You are automatically signed in to access Sprint PCS Vision

services when you turn on your phone.

HowdoIknowwhenmyphoneisconnectedtoSprintPCS

Visionservices?

Your phone automatically connects when PCS Vision

service is used or an incoming message arrives. Your phone

will also display the

12 seconds.)

icon. (Connecting takes about 10-

CanImakecallsanduseSprintPCS Visionservicesatthe

sametime?

You cannot use voice and Sprint PCS Vision services

simultaneously. If you receive a call while Sprint PCS Vision

service is active, the call will be forwarded to voicemail.

You can place an outgoing call anytime, but it will interrupt

any in-progress Sprint PCS Vision session.

Whenismydataconnectionactive?

Your connection is active when data is being transferred.

Outgoing calls are allowed; incoming calls go directly to

voicemail. When active, the (Sending) or (Receiving)

indicator flashes on your phone’s display screen.

Section 3B:Sprint PCSVision

277

Whenismydataconnectiondormant?

If no data is received for 10 seconds, the connection goes

dormant. When the connection is dormant, voice calls are

allowed. (The connection may become active again

quickly.) If no data is received for an extended period of

time, the connection will terminate.

CanIsignoutofdataservices?

You can sign out without turning off your phone; however,

you will not be able to browse the Web or use other

Sprint PCS Vision services. While signed out, you can still

place or receive phone calls, check voicemail, and use

other voice services. You may sign in again at any time.

To sign out, go to Settings > PCSVision > DisableVision in

your phone’s menu.

278

Section 3B:Sprint PCSVision

Section 4

Safety Guidelines

280

Section 4A

Safety

In This Section

ࡗ

Getting the Most Out of Your Reception

MaintainingSafeUseofandAccesstoYourPhone

CaringfortheBattery

Acknowledging Special Precautions and the FCC Notice

Owner’sRecord

Phone Guide Proprietary Notice

Partofgettingthemostoutofyourphoneislearninghowthe

phoneworksandhowtocareforit. This section outlines

performance and safety guidelines that help you

understand the basic features of your phone’s operation.

Section 4A:Safety Guidelines

281

Getting the Most Out ofYour Reception

KeepingTabsonSignalStrength

The quality of each call you make or receive depends on the signal

strength in your area. Your phone informs you of the current signal

strength by displaying a number of bars next to the signal strength icon.

The more bars displayed, the stronger the signal. If you’re inside a

building, being near a window may give you better reception.

UnderstandingthePowerSaveFeature

If your phone is unable to find a signal after 15 minutes of searching, a

Power Save feature is automatically activated. If your phone is active, it

periodically rechecks service availability; you can also check it yourself

by pressing any key. Anytime the Power Save feature is activated, a

message is displayed on the screen. When a signal is found, your phone

returns to standby mode.

UnderstandingHowYourPhoneOperates

Your phone is basically a radio transmitter and receiver. When it’s

turned on, it receives and transmits radiofrequency (RF) signals. When

you use your phone, the system handling your call controls the power

level. This power can range from 0.006 watts to 0.2 watts in digital

mode.

KnowingRadioFrequencySafety

The design of your wireless phone complies with updated NCRP

standards described below.

In 1991-92, the Institute of Electrical and Electronics Engineers (IEEE)

and the American National Standards Institute (ANSI) joined in

updating ANSI’s 1982 standard for safety levels with respect to human

exposure to RF signals. More than 120 scientists, engineers and

physicians from universities, government health agencies and

industries developed this updated standard after reviewing the

available body of research. In 1993, the Federal Communications

Commission (FCC) adopted this updated standard in a regulation. In

August 1996, the FCC adopted hybrid standard consisting of the

existing ANSI/IEEE standard and the guidelines published by the

National Council of Radiation Protection and Measurements (NCRP).

282

Section 4A:Safety Guidelines

MaintainingYourPhone’sPeakPerformance

There are several simple guidelines to operating your phone properly

and maintaining safe, satisfactory service.

ⅷ

Hold the phone with the antenna raised, fully-extended, and over

your shoulder.

ⅷ

Try not to hold, bend, or twist the phone’s antenna.

ⅷ

Don’t use the phone if the antenna is damaged.

ⅷ

Speak directly into the mouthpiece.

ⅷ

Avoid exposing your phone and accessories to rain or liquid spills.

If your phone does get wet, immediately turn the power off and

remove the battery.

Note:For the best care of your phone, only authorized personnel should service your

phone and accessories. Faulty service may void the warranty.

Section 4A:Safety Guidelines

283

Maintaining Safe Use of andAccess to

Your Phone

FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO

SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE

UsingYourPhoneWhileDriving

Talking on your phone while driving (or operating the phone without a

hands-free device) is prohibited in some jurisdictions. Laws vary as to

specific restrictions. Remember that safety always comes first.

FollowingSafetyGuidelines

To operate your phone safely and efficiently, always follow any special

regulations in a given area. Turn your phone off in areas where use is

forbidden or when it may cause interference or danger.

UsingYourPhoneNearOtherElectronicDevices

Most modern electronic equipment is shielded from radiofrequency

(RF) signals. However, RF signals from wireless phones may affect

inadequately shielded electronic equipment.

RF signals may affect improperly installed or inadequately shielded

electronic operating systems and/or entertainment systems in motor

vehicles. Check with the manufacturer or their representative to

determine if these systems are adequately shielded from external RF

signals. Also check with the manufacturer regarding any equipment

that has been added to your vehicle.

Consult the manufacturer of any personal medical devices, such as

pacemakers and hearing aids, to determine if they are adequately

shielded from external RF signals.

Note:Always turn off the phone in health care facilities and request permission

before using the phone near medical equipment.

284

Section 4A:Safety Guidelines

TurningOffYourPhoneBeforeFlying

Turn off your phone before boarding any aircraft. To prevent possible

interference with aircraft systems, the U.S. Federal Aviation

Administration (FAA) regulations require you to have permission from a

crew member to use your phone while the plane is on the ground. To

prevent any risk of interference, FCC regulations prohibit using your

phone while the plane is in the air.

TurningOffYourPhoneinDangerousAreas

To avoid interfering with blasting operations, turn your phone off when

in a blasting area or in other areas with signs indicating two-way radios

should be turned off. Construction crews often use remote-control RF

devices to set off explosives.

Turn your phone off when you’re in any area that has a potentially

explosive atmosphere. Although it’s rare, your phone and accessories

could generate sparks. Sparks can cause an explosion or fire, resulting

in bodily injury or even death. These areas are often, but not always,

clearly marked. They include:

ⅷ

Fueling areas such as gas stations.

ⅷ

Below deck on boats.

ⅷ

Fuel or chemical transfer or storage facilities.

ⅷ

Areas where the air contains chemicals or particles such as grain,

dust, or metal powders.

ⅷ

Any other area where you would normally be advised to turn off

your vehicle’s engine.

Note:Never transport or store flammable gas, liquid or explosives in the

compartment of your vehicle that contains your phone or accessories.

RestrictingChildren’sAccesstoYourPhone

Your phone is not a toy. Do not allow children to play with it as they

could hurt themselves and others, damage the phone or make calls that

increase your invoice.

Section 4A:Safety Guidelines

285

Caring for the Battery

ProtectingYourBattery

The guidelines listed below help you get the most out of your battery’s

performance.

ⅷ

Use only Qwest-approved batteries and desktop chargers. These

chargers are designed to maximize battery life. Using other batteries

or chargers voids your warranty and may cause damage.

ⅷ

In order to avoid damage, charge the battery only in temperatures

that range from 32º F to 113º F (0º C to 45º C).

ⅷ

Don’t use the battery charger in direct sunlight or in high humidity

areas, such as the bathroom.

ⅷ

Never dispose of the battery by incineration.

ⅷ

Keep the metal contacts on top of the battery clean.

ⅷ

Don’t attempt to disassemble or short-circuit the battery.

ⅷ

The battery may need recharging if it has not been used for a long

period of time.

ⅷ

It’s best to replace the battery when it no longer provides acceptable

performance. It can be recharged hundreds of times before it needs

replacing.

ⅷ

Don’t store the battery in high temperature areas for long periods of

time. It’s best to follow these storage rules:

Less than one month:

-4º F to 140º F (-20º C to 60º C)

More than one month:

-4º F to 113º F (-20º C to 45º C)

DisposalofLithiumIon(LiIon)Batteries

For safe disposal options of your LiIon batteries, contact your nearest

authorized service center.

SpecialNote: Be sure to dispose of your battery properly. In some

areas, the disposal of batteries in household or business trash may

be prohibited.

Note:For safety, do not handle a damaged or leaking LiIon battery.

286

Section 4A:Safety Guidelines

Acknowledging Special Precautions

and the FCC Notice

FCC Notice

This phone may cause TV or radio interference if used in close

proximity to receiving equipment. The FCC can require you to stop

using the phone if such interference cannot be eliminated.

Vehicles using liquefied petroleum gas (propane or butane) must

comply with the National Fire Protection Standard (NFPA-58). For a

copy of this standard, contact the National Fire Protections Association,

One Batterymarch Park, Quincy, MA 02269, Attn.: Publication Sales

Division.

Cautions

Any changes or modifications to your phone not expressly approved in

this document could void your warranty for this equipment and void

your authority to operate this equipment. Only use approved batteries,

antennas and chargers. The use of any unauthorized accessories may be

dangerous and void the phone warranty if said accessories cause

damage or a defect to the phone.

Although your phone is quite sturdy, it is a complex piece of equipment

and can be broken. Avoid dropping, hitting, bending or sitting on it.

Body-WornOperation

To maintain compliance with FCC RF exposure guidelines, if you wear a

handset on your body, use the supplied or approved carrying case,

holster or other body-worn accessory. If you do not use a body-worn

accessory, ensure the antenna is at least 1.9 centimeters from your body

when transmitting. Use of non-approved accessories may violate FCC

RF exposure guidelines.

For more information about RF exposure, visit the FCC Website at

www.fcc.gov.

Section 4A:Safety Guidelines

287

SpecificAbsorptionRates(SAR)forWirelessPhones

The SAR is a value that corresponds to the relative amount of RF energy

absorbed in the head of a user of a wireless handset.

The SAR value of a phone is the result of an extensive testing, measuring

and calculation process. It does not represent how much RF the phone

emits. All phone models are tested at their highest value in strict

laboratory settings. But when in operation, the SAR of a phone can be

substantially less than the level reported to the FCC. This is because of a

variety of factors including its proximity to a base station antenna,

phone design and other factors. What is important to remember is that

each phone meets strict federal guidelines. Variations in SARs do not

represent a variation in safety.

All phones must meet the federal standard, which incorporates a

substantial margin of safety. As stated above, variations in SAR values

between different model phones do not mean variations in safety. SAR

values at or below the federal standard of 1.6 W/kg are considered safe

for use by the public.

The highest reported SAR values of the SCP-8300 are:

AMPSmode(Part22):

Head: 1.390 W/kg; Body-worn: 0.857 W/kg

PCSmode(Part24):

Head: 1.330 W/kg; Body-worn: 0.886 W/kg

FCCRadiofrequencyEmission

This phone meets the FCC Radiofrequency Emission Guidelines.

FCC ID number: AEZSCP-83H. More information

on the phone’s SAR can be found from the following FCC Website:

http://www.fcc.gov/oet/fccid.

288

Section 4A:Safety Guidelines

Owner’s Record

The model number, regulatory number and serial number are located

on a nameplate inside the battery compartment. Record the serial

number in the space provided below. This will be helpful if you need to

Model: SCP-8300 by Sanyo

Serial No.:

Phone Guide Proprietary Notice

CDMA Technology is licensed by QUALCOMM Incorporated under one

or more of the following patents:

4,901,307 5,109,390 5,267,262 5,416,797

5,506,865 5,544,196 5,657,420 5,101,501

5,267,261 5,414,796 5,504,773 5,535,239

5,600,754 5,778,338 5,228,054 5,337,338

5,710,784 5,056,109 5,568,483 5,659,569

5,490,165 5,511,073

T9 Text Input is licensed by Tegic Communications and is covered by

U.S. Pat. 5,818,437, U.S. Pat. 5,953,541, U.S. Pat. 6,011,554 and other

patents pending.

Phone Guide template version 4A (Nov 04)

Section 4A:Safety Guidelines

289

290

Prepending a Phone

Saving a Phone Number

Call Waiting 253

Camera Mode Options

Index

Abbreviated Dialing 40, 78

Account Passwords 6

Airplane Mode 71

Alarm Clock 140

Alert Notification 54

Answering Calls 26-28

Any Key Answer 77

AOL Instant Messenger 266

Battery

Status Area Display 168

Contacts Directory 115-126

Adding Phone Numbers

Purging All Events 137

Viewing Memory 136

Call Forwarding 255

Call Guard 96

Index

291

Selecting Ringers 125

Location Settings 66

Lock Code 4, 84

Locking Your Phone 82

Dialing Options 25

Directory Assistance 7

Display Language 75

Display Screen Icons 15

Display Settings 57-65

Downloading Premium

Messaging Settings 67-70

Missed Call Notification 31

Entering Text 41-46

T9 Text Input 42

Open/Close Flip Option 76

Operator Services 8

Headset Mode 79

Phone Illustration 12

Phone Number

Displaying 22

Finding 36

In Camcorder Folder 181

In Camera Folder 170

Instant Messaging 266

Saving 35

292

Index

Pictures

Sending Pictures 186

Storing Pictures 170

Taking Pictures 158

Plus (+) Code Dialing 37

Preset Messages 69

Security 81-89

Erasing All Downloads 87

Erasing the Contacts

Directory 86

Lock Code 84

Locking Your Phone 82

Resetting Your Phone 88

Resetting Your Pictures

Account 87

Unlocking Your Phone 83

Shortcut 74

Qwest Wireless Customer

SMS Text Messaging 249-

252

Sound Settings 48-56

Speakerphone 29

Special Numbers 86

Speed Dial

Assigning Numbers 123

Making a Call 39

Sprint PCS Picture Mail

Downloading Pictures

and Videos 195

Managing Online

Pictures and Videos 193

Password 160

Ready Link 201-227

Alert Notification 225

Contacts 213-219

Making a Call 206

Receiving a Call 211

Ringer Types 224

Setting Ready Link Mode

202

Settings 222

Restricting Calls 85

Ringer Types 48

Ringer Volume 30

Roaming 91-97

Analog Networks 93

Call Guard 96

Checking Voicemail 94

Digital Networks 92

Setting Roam Mode 95

Picture Mail Web Site 192

Sending Sprint PCS

Picture Mail 186-191

Uploading Pictures and

Videos 194

Saved to Phone Folder

174, 184

Screen Call 151

Screen Saver 62

Index

293

Sprint PCS Vision 257-278

Browser Menu 271

Chat 267

Connection Status 261

Downloading Premium

Voice Memos

Voice-Activated Dialing

146-148

Home Page 259

Instant Messaging 266

Launching 259

Navigating the Web 262

Net Guard 260

Password 6

User Name 258

Start-up/Power-off Tone 51

Stop Watch 142

Programming Voice Dial

Tags 146

Voicemail

Checking While Roaming

Clearing the Icon 247

T9 Text Input 42

Text Entry Options 78

Text Greeting 57

Three-Way Calling 254

To Do List 134

Unlocking Your Phone 4, 83

Updating Your Phone 141

Videos

Yahoo! Mail 265

Yahoo! Messenger 266

Recording Videos 176

Sending Videos 190

Storing Videos 181

Video Mode Options 178

294

Index

Snapper 1692467 User Manual
Sentry Industries ATC 20 User Manual
Samsung SCH A310 User Manual
Samsung GT E1107 User Manual
Radio Shack 09A02 User Manual
Philips Coffeemaker HD8752 User Manual
Panasonic PanaXSeries MN103S65G User Manual
Panasonic KX TD7895 User Manual
Onkyo CR 325 User Manual
Nokia NSERIES N97 User Manual