Samsung T479B User Manual

T479B  
P O R T A B L E  
Q U A D - B A N D  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
BMC_T479B_UG_EN_07202010_D4  
warranty of any kind whatsoever with respect to the product, including but not limited to the  
merchantability of the product or its fitness for any particular purpose or use; the design, condition  
or quality of the product; the performance of the product; the workmanship of the product or the  
components contained therein; or compliance of the product with the requirements of any law,  
rule, specification or contract pertaining thereto. Nothing contained in the instruction manual shall  
be construed to create an express or implied warranty of any kind whatsoever with respect to the  
product. In addition, Samsung shall not be liable for any damages of any kind resulting from the  
purchase or use of the product or arising from the breach of the express warranty, including  
incidental, special or consequential damages, or loss of anticipated profits or benefits.  
Privacy  
The privacy and copyright laws of Canada govern the disclosure, reproduction and distr bution of  
data, media and other content, including music and video content. Certain activities, including  
downloads or transfer by any means (including, via cable, Bluetooth® or otherwise) of such  
content may be an infringement of privacy or copyright law. Neither Samsung Electronics Canada  
Inc. nor any of its affiliates shall be liable or responsible for any data or content disclosed,  
reproduced, downloaded or distr buted by the user of this equipment.  
Warning  
Depending on the user interface used in the handset, you may experience slow keypad response  
when performing tasks in the background. This can impact making phone calls. When there is no  
activity or change in the icons at the top of the main LCD display, the handset will resume normal  
operations.  
Table of Contents  
Section 1: Getting Started  
This section explains how to start using your phone by first configuring your hardware, activating your service, and  
then setting up your voice mail.  
Activating Your Phone  
When you subscribe to a cellular network, you are provided with a plug-in SIM card loaded with your subscription  
details, such as your PIN, available optional services, and many other features.  
Removing the Cover  
1. If necessary, switch off the phone by holding down the  
key until the power-off image displays.  
2. Remove the cover by pulling up on the slot, then lift the cover up and off the phone.  
1
         
Removing the Battery  
Lift up (1) and remove (2) the battery.  
Installing the SIM Card  
Important!: The plug-in SIM card and its contacts information can be easily damaged by scratching or bending, so be careful when  
handling, inserting, or removing the card. Keep all SIM cards out of reach of small children.  
Carefully slide the SIM card into the SIM card socket until the card locks into place. Make sure that the card’s gold  
contacts face into the phone and that the upper-left angled corner of the card is positioned as shown.  
Note: If the card is not inserted correctly, the phone does not detect the SIM card. Re-orient the card back into the slot.  
Getting Started  
2
     
Replacing the Battery  
1. Slide the battery into the compartment so that the tabs on the end align with the slots at the bottom of the phone.  
2. Lightly press down on the battery until it snaps into place.  
3. Check that the battery is properly installed before turning on the phone.  
3
   
Installing or Removing the Memory Card  
Your phone supports an optional memory card (microSD™) for data storage of things such as music, pictures, video,  
or other files. This type of memory card is designed for use with this mobile phone and other devices.  
Note: This phone supports up to a 16 Gigabyte memory card.  
1. Place the microSD card into the slot (as shown) and push lightly with your thumb or finger until you hear a light  
click sound. Ensure the microSD’s gold contact pins face downward and the card is placed so that the  
indentations on the card face the same direction as those illustrated.  
2. Push the microSD card with your thumb a second time to eject it from the slot.  
Incorrect  
Correct  
Getting Started  
4
   
Replacing the Cover  
1. Press down on the corners of the battery cover until you hear a click.  
2. Verify that the battery cover is secured.  
Charging a Battery  
Your phone is powered by a rechargeable Lithium-ion battery. A wall charger, which is used for charging the battery, is  
included with your phone. Use only approved batteries and chargers. Ask your local Samsung dealer for further  
details.  
You can use the phone while the battery is charging, but doing so requires additional charging time.  
Note: You must fully charge the battery before using your phone for the first time. A discharged battery recharges fully in approximately 4  
hours.  
1. With the battery installed, temporarily remove the plastic cover on the right side of the phone and plug in the wall  
charger’s connector into the jack.  
Important!: Verify that the handset battery is installed prior to connecting the wall charger. If the battery is not installed and the wall  
charger is connected, the handset power cycles continuously, preventing proper operation.  
5
     
Note: The previous illustration displays the incorrect method for connecting the charger. If attempted, damage to the accessory port will  
occur therefore voiding the phone’s warranty.  
2. Plug the adapter’s power plug into a standard AC wall outlet.  
3. When charging is finished, first unplug the adapter’s power plug from the AC wall outlet and then disconnect  
the wall charger’s connector from the phone.  
Note: Failure to unplug the wall charger before you remove the battery can cause the phone to become damaged.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, a warning tone sounds and the “Low battery”  
message repeats at regular intervals on the display. In this condition, your phone conserves its remaining battery  
power, not by turning off the backlight, but by entering the dimming mode.  
When the battery level becomes too low, the phone automatically turns off.  
Switching the Phone On or Off  
1. Press and hold the  
2. If the phone asks you to enter the phone password, use the keypad to enter this password and press either the  
Confirm soft key or  
key until the phone switches on.  
.
Getting Started  
6
     
3. If the phone asks for a PIN, use the keypad to enter the PIN and press either the Confirm soft key or  
The phone searches for your network and after finding it, the service provider name displays on the upper center  
of your display. Now you can make or receive calls.  
Note: The display language is preset to English at the factory. To change the language, use the Language menu. For more information,  
4. When you wish to switch off the phone, press and hold the  
key until the power-off image displays.  
Setting Up Your Voicemail  
For new users, follow the instructions below to set up voicemail:  
1. In Idle mode, press and hold the  
key until the phone dials voicemail.You may be prompted to enter a  
password.  
2. Follow the tutorial to create a password, a greeting, and your name.  
Note: These steps may be different depending on your network.  
Accessing Your Voice Mail  
You can access your voicemail by pressing and holding  
on the keypad. To access voicemail using the menu:  
1. In Idle mode, press and hold  
. Your phone dials the specified voicemail number.  
2. When connected, follow the voice prompts from the voicemail center.  
7
     
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also displays the screen and the icons that display when the  
phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many significant features. The following list outlines a few of the  
features included in your phone.  
Slider phone with full QWERTY keyboard  
2.0 Megapixel Camera with 12x Digital Zoom  
Bluetooth® Wireless Technology  
User friendly, menu driven access to features and options  
Text Messaging, Picture Messaging, Video Messaging, and Instant Messaging capability  
Email capability (work and personal)  
Sound/Image media capability  
Media feature provides web access, photos, music, images, sounds, videos, games and apps, other files, and memory status.  
Tools feature provides calendar, alarm, voice recognition, tasks, memo, calculator, tip calculator, world clock, converter, timer, and  
stopwatch.  
Understanding Your Phone  
8
       
Front View of Your Phone  
The following illustrations show the main elements of your phone:  
1
14  
13  
12  
11  
2
3
4
5
10  
9
6
7
8
7
Keys  
The following list correlates to the illustrations.  
1. Earpiece allows you to hear the other caller.  
2. Left Soft key allows you to select soft key actions or menu items. The option for the soft key displays on the  
bottom, left portion of the screen.  
9
       
3. Send key allows you to make or answer a call. In Idle mode, a short press displays Call history.  
4. Messaging key allows you to program this key as a shortcut to your favorite messaging application. You can  
reprogram the key at any time.  
5. Voicemail key allows you to quickly access your voicemail. Press and hold this key for two seconds to  
automatically dial your voicemail’s phone number.  
6. Alphanumeric keys allow you to enter numbers, letters, and some special characters.  
7. Special Function keys allow you to activate unique features while in Idle mode. In Idle mode, if you press and  
hold the * key, the keypad locks. In Idle mode, if you press and hold the # key, you can toggle between the  
Vibration profile and Normal profile.  
8. Microphone is used during phone calls and allows other callers to hear you clearly when you are speaking to  
them. It is also used in making voice note recordings.  
9. Cancel/Clear key (in Menu mode) returns you to the previous menu level. In text editing mode, this key  
deletes characters.  
10. Power On/Off (Exit) key ends a call. Press and hold this key for two seconds to turn your phone on or off.  
While in the Menu mode, it returns the phone to Idle mode and then cancels your input.  
11. Right Soft key allows you to select soft key actions or menu items. The option for the soft key displays on the  
bottom, right portion of the screen. It provides quick access to the web.  
12. OK (Select) key allows you to accept the choices offered when navigating through a menu.  
13. Navigation key scrolls through the phone’s menu options and acts as a shortcut key from Idle mode. In Idle  
mode:  
• Up key: allows you to directly access the Call history.  
• Down key: allows you to directly access Contacts.  
• Left key: allows you to directly access the Message inbox.  
• Right key: allows you to change ringer settings.  
14. Display shows all the information needed to operate your phone, such as the received signal strength, phone  
battery level, and time.  
Understanding Your Phone  
10  
This phone also offers the convenience of a slide out QWERTY keyboard. To open the phone to access the keyboard,  
rotate the phone 90 degrees to the left. Slide the top section of the phone up to open, as shown.  
To view the display in landscape mode and access the keyboard, slide the phone open as shown.  
Camera View of Your Phone  
The following illustration shows the back of the phone.  
1
2
1. Camera lens allows you to aim and shoot a picture using the camera.  
2. Speaker allows you to hear the camera sounds and music played on the phone.  
11  
       
Side Views of Your Phone  
The following illustrations show the external elements of your phone.  
1
2
3
4
1. Phone anchor allows you to connect a strap with which to carry the phone. Remove the back battery cover to  
fully install a strap to this phone anchor.  
2. Volume keys allow you to adjust the Ring volume in standby mode (with the phone open) or adjust the  
Speaker volume during a call. When receiving an incoming call, if you press the volume key, you can mute the  
ring tone. If you press and hold the volume key, you can reject the call.  
3. Power/Accessory Interface connector allows you to connect a power cable or optional accessories, such as  
a USB/data cable or a hands-free headset.  
4. Camera key allows you to take pictures when you are in camera mode. It launches the camera with a press.  
Understanding Your Phone  
12  
   
Display Layout  
Your display screen provides a wealth of information about the phone’s status and options. The display has three  
areas:  
Icons  
Main Display area  
Soft Function keys  
Display  
Your phone has a display on the front of the phone. From this front display, you can monitor the activity and status of  
your phone such as signal strength and battery levels. Icons display at the top of the screen and indicate the type of  
incoming call or message, and displays any alarms for the specified time. The display also shows the current time on a  
digital clock.  
The backlight turns on when an icon displays on the screen. The Missed messages tab also displays on this screen.  
13  
     
Missed Messages Tab  
When you receive new messages, icons display in three locations: on the phone’s screen, Missed messages tab, and  
on the icon bar at the top of the screen.  
View tabs for  
Missed Calls,  
Text Messages,  
and Voicemail  
Icons  
This list identifies the symbols you’ll see on your phone’s display screen:  
Shows the received signal strength. The greater the number of bars, the stronger the signal.  
Shows the level of your battery. The more bars you see, the more power remains.  
Displays while connecting to the 3G network.  
Displays when your phone is connected to the PC.  
Displays when a call is in progress.  
Displays when the phone is not receiving a signal.  
Displays when the phone is in Airplane mode.  
Understanding Your Phone  
14  
   
Displays when Bluetooth wireless technology is active.  
Displays when a new text message is received.  
Displays when a new voicemail is received.  
Displays when a new Picture message is received.  
Displays when you set an alarm to ring at a specified time. For more details, see “Alarm” on page 64.  
DisplayswhentheCallForwardingfeatureisactive.Formoredetails,see“Callforwardingonpage 99.  
Displays when Vibration Mode is active.  
Displays when sound profile is set to Driving.  
Displays when sound profile is set to Outdoor.  
Displays when sound profile is set to Silent.  
Backlight  
A backlight illuminates the internal display and the keypad. When you press any key, the backlight comes on. It goes  
off when no keys are pressed within a given period of time, depending on the setting within the Backlight menu. The  
display turns off after one minute to conserve battery power.  
The Backlight time setting is how long the keypad backlight is on. The Dim option is how much longer the display  
remains lit after the keypad backlight goes off.  
In Idle mode, press Menu Settings Display settings Backlight time and press  
The On setting is how long the keypad backlight is on. You can select 5 seconds, 15 seconds, or 30 seconds.  
1. Highlight the On field and press  
.
.
15  
   
2. Select the amount of time you want the backlight to stay on and press  
.
The Dim option is how much longer the display remains lit after the keypad backlight goes off. You can select Off, 5  
seconds, 15 seconds, or 30 seconds.  
1. Highlight the Dim field and press  
.
2. Select the amount of time you want the phone to delay before the phone dims and press  
.
Understanding Your Phone  
16  
Section 3: Call Functions  
This section describes how to make or answer a call. It also explains the features and functionality associated with  
making or answering a call.  
Making a Call  
When the idle screen displays, enter the number you want to dial and press  
.
Note: When you activate the Auto redial option in the Call settings menu, the phone automatically redials up to 10 times when the person  
does not answer the call or is already on the phone, provided your call is not sent to voicemail. For more information, refer to  
Making an International Call  
1. Press and hold the  
2. Enter the country code, area code, and phone number.  
3. Press to make the call.  
key. The + character displays.  
Correcting the Number  
1. Press the  
key to clear the last digit displayed.  
2. Press the Left or Right Navigation key until the cursor is immediately to the right of the digit to clear and then  
press  
to clear any other digit in the number. You can also enter a missing digit  
3. Press and hold the  
key to clear the entire display.  
Ending a Call  
Briefly press the  
key to end the call.  
Redialing the Last Number  
The phone stores the numbers of the calls you’ve dialed, received, or missed if the caller is identified.  
To recall any of these numbers:  
1. If you typed characters on the display, press  
to return to Idle mode.  
17  
             
2. Press the Up Navigation key to display a list of the most recent numbers used in the order you dialed or  
received them.  
3. Use the Up and Down Navigation keys to scroll through the numbers and highlight the number you want.  
4. To view call time for this number, press  
key to display the following options:  
. Before you dial the number, you may also press the Options soft  
• Call: allows you to call the selected number.  
• Send message: allows you to send a Message to the number.  
• View contact details: displays the details for the selected contact such as the contact name and phone number. (This option  
displays only if the number is stored in Contacts.)  
• Save to contacts: saves the selected contact in Contacts. (This option only displays if the number is not stored in Contacts).  
• Delete: allows you to delete the selected number or All call records.  
5. Press  
to dial the number.  
Making a Call from Contacts  
You can store regularly used phone numbers into the phone’s memory (Contacts).  
Once you store a number in Contacts, you can press only a few keys to dial the stored number. By using the Speed  
Dial feature, you can also assign your most frequently-used numbers to number keys.  
For further details about Contacts, see “Contacts” on page 34..  
Adjusting the Call Volume  
During a call, use the Volume keys on the left side of the phone to adjust the earpiece volume.  
Press the Up volume key to increase the volume level and the Down volume key to decrease the level.  
In Idle mode, you can also adjust the ring volume using these keys.  
Answering a Call  
When somebody calls you, the phone rings and displays the incoming call image.  
The caller’s phone number, or name if stored in Contacts List, displays.  
1. Press  
or the Accept soft key to answer the incoming call.  
Call Functions  
18  
         
If the Any key option in the Answering mode menu is activated, you can press any key to answer a call except  
for the key and the Reject soft key.  
Note: To reject an incoming call, press the Reject soft key or press  
.
2. End the call by pressing  
.
Note: You can answer a call while using the Contacts List or menu features. After ending the call, the phone returns to the function screen  
you were previously using.  
Calls  
All incoming, outgoing, and missed calls are listed in Calls. You can also view Call time records or reset all the call time  
records.  
In Idle mode, press Menu Calls and press the Select soft key or  
to enter the menu.  
– or –  
Press the Up Navigation key.  
The following options are available:  
All calls  
This menu lets you view the 90 most recent calls including incoming, outgoing, and missed. The name or number, if  
already stored in your Contacts List, displays.  
Tip: Scroll Left or Right to access All calls, Missed calls, Dialed calls, and Answered calls.  
Missed calls  
This menu lets you view the 30 most recent calls you received, but did not answer. The name and number, if already  
stored in your Contacts List, displays.  
Viewing Missed Calls  
When you are unable to answer a call for any reason, you can find out who is calling you, if this service is available, so  
that you can call the person back.  
The number of calls you missed displays on the idle screen on the Missed Call tab, immediately after a call is missed.  
19  
         
To view a missed call immediately:  
1. If the display is off, press the volume key to turn the display on. The Missed Call tab displays the last missed  
call.  
2. Press the  
key to call the displayed number.  
– or –  
Press the Up Navigation key to view the Calls menu, then press the Right Navigation key to view Missed  
calls. The number corresponding to the most recently missed call displays, if available.  
3. To scroll through the missed calls, press the Up or Down Navigation key.  
4. Press  
– or –  
Press  
to call the displayed number.  
to display call details.  
– or –  
Press the Options soft key for the following options:  
• Call: allows you to call back the missed caller.  
• Send message: allows you to send a Message to the recipient.  
• Delete: allows you to delete the selected number or delete all call records.  
• View contact details: displays the name and phone number of the missed call. (This option displays only if the number is stored in  
Contacts.)  
• Save to contacts: allows you to save the selected number to the Contacts list. (This option displays if the number is not already  
saved to the Contacts list.)  
Tip: You can press the  
key at any time to exit the Missed Calls feature.  
Dialed calls  
This menu lets you view the 30 most recent calls you dialed. The name and number, if already stored in your  
Contacts List, displays.  
Call Functions  
20  
 
Answered calls  
This menu lets you view the 30 most recent calls you received. The name and number, if already stored in your  
Contacts List, displays.  
Delete All  
There are two ways to delete all of the records at one time.  
1. Press the Up Navigation key to display the Calls menu.  
2. Press Options Delete All and press  
.
3. At the Delete all? screen, press Yes to delete all calls or No to cancel.  
– or –  
1. In Idle mode, press Menu Settings Call settings Call history management.  
2. Select Delete all history and press the Select soft key or  
.
3. Highlight options, then press  
to place a check mark next to each selection.  
• All calls: deletes all call history.  
Missed calls: deletes all missed call history.  
• Dialed calls: deletes all dialed call history.  
• Answered calls: deletes all answered call history.  
4. Press Delete to delete the selected records.  
Vibration Profile  
Vibration profile is convenient when you want to stop the phone from making any noise (in a theater for example).  
In Idle mode, press and hold the  
key until the “Vibration profile on” message and the Vibration profile icon (  
)
displays. Your phone vibrates using Vibration profile instead of sounds.  
To exit and reactivate the previous sound settings, press and hold the  
message displays.  
key again until the “Normal profile on”  
21  
       
Selecting Functions and Options  
Your phone offers a set of customizable functions. These functions are arranged in menus and sub-menus, and  
accessed using the two soft keys. Each menu and sub-menu allows you to view and alter the settings of a particular  
function.  
Soft Keys  
The roles of the soft keys vary depending on the function you are currently using. The labels on the bottom line of the  
display just above each key indicate their current role.  
Press the Right  
Press the Left soft key  
soft key to  
for Menu mode.  
access the web  
Selecting Options  
To view the various functions and options available:  
1. Press the appropriate soft key.  
2. Select the displayed function or the highlighted option by pressing the Select soft key or  
.
3. View the next function or highlighting the next option on a list by pressing the Down Navigation key.  
4. Move back to the previous function or option on a list by pressing the Up Navigation key.  
5. Move back up one level in the menu structure by pressing the Back soft key.  
6. Press  
to exit the menu structure without changing the settings.  
In some functions, you are asked for a password or PIN. Enter the correct code and press the OK soft key or  
.
Call Functions  
22  
       
When you access a list of options, your phone highlights the currently active option. If, however, there are only two  
options, such as On/Off or Enable/Disable, your phone highlights the option that is not currently active so that you  
can select it.  
Options During a Call  
Your phone provides a number of control functions that are available for use during a call.  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off so that the other person cannot hear you.  
Example: You want to say something to a person in the room but do not want the person on the phone to hear you.  
To switch the microphone off temporarily:  
Press  
number of the caller.  
To switch the microphone back on:  
. The other person can no longer hear you. The Mute icon (  
) displays on the left above the name or  
Press  
. The other person can hear you again.  
Placing a Call on Hold  
You can place the current call on hold whenever you want. If your network supports this service, you can also make  
another call while a call is in progress.  
To place a call on hold:  
1. Press the Options soft key, highlight the Hold option, then press the Select soft key or  
2. Press the Resume soft key to reactivate the call.  
.
To make a new call while a call is in progress:  
1. Press Options New call and press the Select soft key or  
.
2. Enter the new phone number that you want to dial or press Search to look up the number.  
3. Press Call to call the second number.  
When there is an active call and a call on hold, you may switch between the two calls by placing the current held call to  
active and then placing the other call on hold.  
23  
         
To switch between the two calls:  
1. Press the Options soft key, select Swap, and press  
. The current active call is placed on hold and the call  
on hold is then reactivated so that you can continue conversing with that person.  
2. Press when you are finished or want to end the call.  
Using the Speakerphone  
While on a call, you can use your Speakerphone by following these steps:  
1. Press the Spkr on soft key.  
2. To turn the Speakerphone off, press the Spkr off soft key.  
Searching for a Number in Contacts  
You can search for a number in Contacts during a call.  
1. Press the Options Contacts and press  
. The Contacts screen displays.  
With the Contacts entries displayed:  
2. Enter the name that you want to find in the textbox located above the entries. If you enter the first few letters of  
the name, the Contacts entries display, starting with the first entry that matches your input.  
Or, use the Up or Down Navigation key to highlight the contact that you desire.  
3. To view the highlighted entry, press View. The Contact information displays.  
Tip: For further details about Contacts, see “Finding a Contact Entry” on page 34..  
Call Waiting  
You can answer an incoming call while you have a call in progress, if this service is supported by the network and you  
have previously set the Call waiting option to Activate.  
You are then notified of an incoming call by a call waiting tone.  
To answer a new call while you have a call in progress:  
1. Press either the Accept soft key or  
to answer the incoming call. The first call is automatically put on hold.  
Call Functions  
24  
             
2. To switch between the two calls, press the Options soft key, highlight Swap and press the Select soft key  
or  
3. To end a call on hold, press Options End Active call, Held call, or All calls and press  
.
.
4. To end the current/remaining call, press  
.
Making a Multi-Party Call  
A multi-party call is a network service that allows up to six people to participate in a multi-party or conference call.  
For further details about subscribing to this service, contact your service provider.  
Setting up a Multi-Party Call  
1. Call the first participant in the normal way.  
2. Press Options New call.  
3. Call the second participant in the normal way. The first call is automatically placed on hold.  
4. To join the first participant to this multi-party call, press Options Join.  
Note: These first two calls are then grouped together on screen and displayed with an adjacent number corresponding to the order in  
which the calls were made.  
Note: There are a maximum of two callers that can be joined to a single multi-party line. You cannot create two multi-party calls.  
Having a Private Conversation With One Participant  
When you have two participants in a multi-party session, it might be necessary to place one of those participants on  
hold so that a private conversation can be held with a single caller. While you are in a multi-party call:  
1. Press Options  
2. Press the Up or Down Navigation key to highlight the person with which you want to talk privately, and press the  
Select soft key or  
Split. The short list of call participants then displays with the first caller selected.  
.
Note: You can now talk privately to that person while the other participant is on hold.  
3. To return to the multi-party call, press the Options  
Join. The other participant can now hear your conversation.  
25  
       
Section 4: Menu Navigation  
This section explains the menu navigation for your phone. It also includes an outline of all available menus  
associated with your phone.  
Menu Navigation  
You can tailor the phone’s range of functions to your needs using menus and sub-menus. Menus and sub-menus can  
be accessed by scrolling using the Navigation keys or by using the shortcuts.  
Selecting a New Wallpaper  
There are several sources available for wallpapers. You can download an image from the Display settings menu, use  
an image, or use a photo.  
1. In Idle mode, press Menu Settings  
Display settings  
Wallpaper.  
2. Press Images Wallpapers  
3. Select a wallpaper panel.  
4. Select Set.  
.
Accessing a Menu Function by Scrolling  
As you navigate through a menu, options display on the screen as scrollable lists.  
To navigate a scrollable list:  
1. In Idle mode, press Menu.  
2. Scroll using the Navigation keys to reach a main menu (for example, Settings). Press the Select soft key or  
to enter the menu.  
3. If the menu contains sub-menus, (for example, Phone Settings), after highlighting the sub-menu, press the  
Select soft key or  
.
4. If the menu you selected contains further options, repeat this step.  
5. To scroll through the menus, press the Up or Down Navigation key.  
6. To confirm the chosen setting, press the Select soft key, or  
.
7. To return to the previous menu level, press the Back soft key.  
Menu Navigation  
26  
           
8. To exit the menu without changing the settings, press  
.
Using Shortcuts  
The menu items, such as menus, sub-menus, and options, are numbered and can be accessed quickly by using their  
shortcut numbers. For the main menus, press the corresponding number keys (1 to 0) to access any one of the  
shortcuts.  
Example: Accessing the Security menu.  
1. Press Menu.  
2. Press  
3. Press  
4. Press  
for Settings.  
for Phone settings.  
for Security.  
27  
   
Section 5: Entering Text  
This section outlines how to select the desired text input mode when entering characters into your phone. This  
section also describes how to use the T9 predictive text entry system to reduce the number of key strokes associated  
with entering text.  
Using the QWERTY Keyboard  
This phone also offers the convenience of a slideout QWERTY keyboard. Using the QWERTY keyboard, you can  
type letters, numbers, punctuation, and other special characters into text entry fields or other applications simpler and  
faster than using the telephone keypad.  
The following keys perform special functions when entering text:  
10  
11  
1
9
8
2
3
4
5
6
7
1. Alt allows you to use characters displayed at the top of the QWERTY keys. Examples: $, @, #, !  
2. WWW./.COM inserts the www. or .com when entering a URL in the browser, or when logging in to Instant  
Messenger.  
Entering Text  
28  
         
3. Sym/Shift displays the Symbols page when this key is pressed with the Alt key. Choose from an extensive list of  
symbols and other character sets. Shift converts the alphabetic character into uppercase, and changes the text  
input mode to Upper/Lower case mode.  
4. Left Soft Key allows you to select soft key actions or menu items corresponding to the bottom left line on the  
display screen. In Idle mode, the Left soft key also provides quick access to the Menu.  
5. Space (  
) inserts an empty space.  
6. Right Soft key allows you to select soft key actions or menu items corresponding to the bottom right line on the  
display screen. In Idle mode the Right soft key also provides quick access to the Web.  
7. Period/Less-than symbol inserts a period or less-than symbol.  
8. OK (Select) key allows you to accept the choices offered when navigating through a menu.  
9. Navigation key scrolls through the phone’s menu options and acts as a shortcut key from Idle mode.  
In Idle mode:  
Up key: allows you to directly access the Calls.  
Down key: allows you to directly access Contacts.  
Left key: allows you to directly access the Message inbox.  
.
Right key: allows you to create an Ringer settings.  
10. Enter moves the insertion point to the next line in a message.  
11. Back deletes the previously typed words, starting with the last letter typed.  
The keyboard provides dual-use keys labeled with alphabetic characters on the lower half and numbers and symbols  
on the upper half. Touch the key corresponding to the character you want to enter.  
Changing the Text Input Mode  
When using your phone, you often need to enter text, such as when storing a name in your Contacts List, creating your  
personal greeting, or scheduling events on your calendar. You can enter alphanumeric characters by using your  
phone’s keypad.  
Your phone has the following text input modes:  
ABC: This mode allows you to enter letters by pressing the key labeled with the corresponding letter.  
29  
         
T9: This mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one letter; for  
®
example, touching  
can enter J, K, or L. However, the T9 mode automatically compares the series of keystrokes you  
make with an internal linguistic dictionary to determine the most likely word, thus requiring far fewer keystrokes than the  
traditional ABC mode.  
Numeric: This mode allows you to enter numbers.  
Symbols: This mode allows you to enter symbols, such as punctuation marks.  
Note: When you are in a field where you can enter characters, the text input mode indicator displays at the bottom right of the screen.  
Example: Writing a text message.  
Create message  
Landscape mode  
Create message  
Portrait mode  
1. Press the Right soft key to change the text input mode:  
Important!: The handset does not maintain text input mode settings when switched from portrait to landscape mode.  
Entering Text  
30  
           
The following options are available in Portrait and Landscape mode:  
ABC  
T9 (English)  
Numeric  
Symbol  
2. Enter text in the text message box using the selected text input mode when the Text input mode indicator that  
you desire displays.  
Using ABC Mode  
With the phone slider closed, to use ABC mode, use the letter keys to enter your text.  
1. Press the key labeled with the letter you want:  
Once for the first letter, twice for the second letter, and so on.  
2. Select the other letters in the same way.  
To enter periods, hyphens, apostrophes, and other special characters, press and hold the  
press the key that contains the associated symbol.  
key then  
To shift case in ABC mode, press  
, then press the letter key.  
Note: You can move the cursor by using the Navigation keys.  
To delete letters:  
Press  
Press and hold the  
key to clear the display.  
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or a different letter on the same  
key, just wait for a few seconds for the cursor to automatically move to the right, and then select the next letter.  
Keys  
By default, the first letter of an entry is capitalized and all consecutive letters are kept in lowercase (unless the  
key is used). After a character is entered, the cursor automatically advances to the next space after two seconds or  
when you enter a character on a different key.  
31  
       
Characters scroll in the following order (lowercase characters shown in parentheses):  
.@,:?-!’/1  
PQRS7 (pqrs7)  
TUV8 (tuv8)  
ABC2 (abc2)  
DEF3 (def3)  
GHI4 (ghi4)  
WXYZ9 (wxyz9)  
insert a space  
Press and hold to insert zero.  
JKL5 (jkl5)  
Press to shift case.  
Press and hold to insert #.  
MNO6 (mno6)  
Using T9 Mode  
T9 is a predictive text input mode that allows you to key in any character using single keystrokes. This text input  
mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. While in the T9 mode, press any one of the letter keys to enter a word. Press each key only once for each  
letter.  
Example: To enter “Hello” in T9 mode, from the portrait keyboard, press the 4, 3, 5, 5, and 6 keys.  
The word that you type displays on the screen. The word may change with each consecutive key that you  
press.  
2. Enter the whole word before editing or deleting the keystrokes.  
3. Press  
to insert a space and begin entering the next word.  
Entering Text  
32  
     
To enter periods, hyphens, apostrophes, and other special characters press  
associated symbol.  
then press the key that contains the  
To shift case in T9 mode:  
Press  
. There are 3 cases: Capital lock, Initial capital, and Lower case.  
Tip: You can move the cursor by using the Navigation keys.  
To delete characters:  
Press  
Using Numeric Mode  
Numeric mode enables you to enter numbers into a text message.  
Press and hold the  
key to clear the display.  
Press the keys corresponding to the digits you want to enter.  
Using Symbol Mode  
Symbol mode enables you to insert symbols and punctuation marks into text.  
To display a list of symbols:  
1. Press  
until the symbols display on the screen, or press the Right soft key and select Symbol.  
2. Press the corresponding number key to select a symbol.  
3. Press the Navigation keys to display more symbols.  
4. Press the  
previous mode.  
5. Press the OK soft key or  
key to clear the symbol(s). When the input field is empty, this key returns the display to the  
to insert the symbol(s) into your message.  
33  
           
Section 6: Contacts  
This section explains how to use and manage your Contacts.  
Using the Contacts List  
Use the following procedures to store a new contact to your phone.  
Storing a Number in the Phone’s Memory  
The default storage location for saving phone numbers to your Contacts is your phone’s built-in memory.  
1. In Idle mode, press Menu Contacts Add new contact.  
2. Enter a first name in the First name field. Press the Down key to tab to the next text box.  
3. For further details about how to enter characters, see “Using ABC Mode” on page 31..  
4. Enter a last name in the Last name field.  
5. Use the Up or Down Navigation key to enter numbers or text in the following fields: Mobile, Home, Work,  
Others, Email, Group, Picture ID, Ringtone, Birthday, Address, and Notes.  
6. Press the Options soft key to:  
• Select language: allows you to select English or Français as the language with which to display your contact.  
• Add more fields: allows you to add a nickname, an additional Email address, a URL, DTMF, Group, and additional  
address fields.  
• Delete field: allows you to delete additional fields created with the Add more fields option.  
• Cancel: cancels the Add new contact operation and returns to the Contacts menu.  
7. Press Save to save your selections. The number saves to your selected destination and the new contact  
information displays.  
8. Press  
to return to Idle mode.  
Finding a Contact Entry  
You can store phone numbers and their corresponding names in the phone’s built-in memory (Contacts).  
1. In Idle mode, press Menu Contacts Contact List and press the Select soft key or  
.
Contacts  
34  
             
2. Enter the first few letters of the name in the text box. The Contacts entries are listed, starting with the first entry  
matching your input.  
3. If needed, press the Up or Down Navigation key until the entry you want highlights.  
4. Once you locate the entry, press  
to dial the number, or press the Options soft key to access the following  
Contacts entry options:  
• Edit: allows you to edit the Name and number for the selected contact.  
• Send Message: allows you to send a message to the selected number.  
• New contact: takes you to the Add new contact menu.  
• Call: places the call to the selected phone number.  
• Copy to phone/SIM card: copies the selected or multiple contacts to the phone or SIM card. Depends on where the  
contact was previously saved.  
• Assign speed dial: allows you to assign a speed dial key number to the selected Contacts entry.  
• Send namecard via: allows you to send your name card via Message or Bluetooth.  
• Delete: allows you to delete the selected name and number from your Contacts or delete multiple numbers. You are  
asked to confirm your name and number deletion by pressing the Yes soft key. To cancel, press the No soft key.  
• Print via Bluetooth: sends the contents of the selected text message to a Bluetooth enabled printer.  
5. Press  
to view contact information and press the Options soft key to view the following options:  
• Edit: allows you to edit the name and number fields in the entry. You can also add an email address and notes.  
• Send Message: allows you to send a message to the selected number.  
• Copy to phone/SIM card: copies the selected or all of the contacts to the phone or SIM card. Depends on where the  
contact was previously saved.  
• Send namecard via: allows you to send your name card via Message or Bluetooth.  
• Delete: allows you to delete the selected name and number from your Contacts. You are then asked to confirm the  
name and number deletion by pressing the Yes soft key. Press the No soft key to cancel the deletion.  
• Print via Bluetooth: allows you to send the selected contact to a Bluetooth enabled printer.  
6. Press Call to dial the selected number.  
35  
Dialing a Number from Contacts  
Once you have stored phone numbers in Contacts, you can dial them easily and quickly by using the location  
numbers that were assigned to them.  
Note: If you cannot remember a location number, you must search Contacts to find an entry by name. For more information, refer to  
Adding a New Caller Group  
1. In Idle mode, press Menu Contacts Groups and press the Select soft key or  
.
2. Press the Options soft key and select the Add new group option.  
3. Enter a name for the new group in the New group field and press Options Save  
.
4. Highlight the group name again and press Options Group settings and press the Select soft key or  
.
5. Highlight the Picture field and press  
to create a Picture ID for this new caller group. Select from one of the  
following options:  
• Images: displays a list of photos from which to select as a Caller ID. You can also select Wallpapers or Downloaded  
images.  
6. Highlight the Ringtone field and press  
7. Select Sounds and press the Select soft key or  
8. Press Options Save when you are finished.  
9. Press to return to Idle mode.  
to create a ringtone for this new caller group.  
. You can also select a sound from the Voice list folder.  
Editing a Caller Group  
1. In Idle mode, press Menu Contacts Groups  
.
2. Scroll through the group list and highlight the group you want.  
To edit the Caller group name:  
3. Press Options and select Rename group  
.
4. Backspace and enter a new name for the group, then press Options  
Save.  
Contacts  
36  
       
To change the image associated with the Caller group:  
5. Press Options and select Group settings  
6. Highlight Picture and press  
.
.
7. Select an image from one of the folders, press Select, then press Options  
Save. Your Caller group settings  
save.  
To change the ringtone associated with the Caller group:  
8. Press Options and select Group settings  
.
9. Highlight the Ringtone field and press  
.
10. Select a sound from the Sounds folder, press Select, then press Options  
Save. Your Caller group settings  
save.  
11. Press  
to return to Idle mode.  
Speed Dialing  
Once you store phone numbers from your Contacts list, you can set up to 8 speed dial entries and then easily dial  
them whenever you want, by pressing the associated numeric key.  
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the appropriate key.  
Setting Up Speed Dial Entries  
1. In Idle mode, press Menu  
2. Use the Navigation key to select the keypad number key to where you want to assign the new speed-dialing  
number and press the Assign soft key or  
3. Highlight a contact entry number from the list and press the Select soft key or  
Contacts Speed dial and press the Select soft key or  
.
.
.
4. You receive a Speed dial assigned confirmation and the Speed dial menu displays the contact assigned to the  
number key you selected.  
5. Press  
to return to Idle mode.  
Note: Memory location 1 is reserved for your Voicemail server number and this speed dial location can not be changed.  
37  
     
My Profile  
My Profile allows you to create a virtual business card. Once completed, you can send the card to recipients as a V-  
card attachment.  
Note: As with any profile, your profile can be associated with a group.  
1. In Idle mode, press the Down Navigation key to display the Contact list  
.
My profile is listed at the top of the contact list and displays the name of the associated group (if applicable).  
2. Press  
3. Press  
to view if your profile is available.  
to edit.  
4. Fill in the desired fields.  
5. Press Save to save your information.  
Contacts Management  
To access the Management menu:  
In Idle mode, press Menu  
Contacts Manage contacts and press the Select soft key or  
.
View contacts from  
This option allows you to view all the contacts stored on the Phone and SIM card, Phone, or SIM card.  
1. In Idle mode, press Menu Contacts Manage contacts View contacts from option and press the Select  
soft key or  
.
2. Select Phone and SIM card Phone, or SIM card and press Save to save your selection.  
,
Save contacts to  
This option allows you to save new contacts to the SIM, Phone, or the Phone and SIM card.  
1. In Idle mode, press Menu Contacts Manage contacts Save contacts to option and press the Select soft  
key or  
2. Select Phone  
.
,
SIM card, or Ask on saving and press Save to save your selection.  
Contacts  
38  
           
Copy all to  
You can copy all Contact entries to the SIM card.  
Note: When storing an Address Book entry on the SIM card, only the Name, Address, and slot location are saved.  
1. In Idle mode, press Menu  
or  
2. Highlight Phone or SIM card and press the Select soft key or  
Contacts  
Manage contacts  
Copy all to option and press the Select soft key  
.
.
By default, all the entries in the Contact list on the Phone or SIM card are selected.  
3. Highlight each contact you want to copy and press to place a check mark next to the entry. Or highlight All  
and press to copy all entries.  
4. Press Copy to copy the selected contacts to the Phone or SIM card.  
Delete all  
Important!: Once contact entries are deleted, they cannot be recovered.  
This option allows you to delete all your contacts from the Contacts.  
Deleting all of the Contacts Entries  
Perform the following procedure to delete all your entries from your phone’s memory.  
Important!: Once Contacts entries are deleted, they cannot be recovered.  
1. In Idle mode, press Menu  
Contacts  
Manage contacts  
Delete all and press the Select soft key or  
.
2. Highlight All Phone, or SIM card and press the Select soft key or  
,
.
3. When the Delete? confirmation message displays, press the Yes soft key to delete or press No to cancel.  
4. If you select Yes, enter your password.  
5. Press the Back soft key or  
to return to Idle mode.  
39  
   
Memory status  
You can check how many names and numbers are stored in Contacts, within the Phone, SIM card, and the FDN. You  
can also see the current storage capacity of the memory.  
1. In Idle mode, press Menu  
or  
Contacts  
Manage contacts  
Memory status and press the Select soft key  
.
2. Press the Back soft key or  
to return to Idle mode.  
My Number  
This function is a memory aid, which you can use to edit or remove your own phone number. You can also edit the  
default name assigned to your phone number.  
1. In Idle mode, press Menu  
Contacts  
My number and press  
. The cursor displays in the Name field.  
2. Press the Down Navigation, press  
to erase the current entry, and type in a new number  
if desired.  
3. Press Save to save your information.  
Using the Service Dialing Numbers  
You can view the list of Service Dialing Numbers (SDN) assigned by your service provider. These numbers include  
emergency numbers, customer service numbers and directory inquiries.  
In Idle mode, press Menu  
Contacts  
Service number and press  
. The service numbers display.  
Contacts  
40  
         
Section 7: Messages  
This section describes how to send or receive different types of messages. It also explains the features and  
functionality associated with messaging.  
Types of Messages  
Your phone provides the following message types:  
Text Message  
Picture Message  
Email message  
Instant Message  
Voicemail  
Message Icons on the Icon Line  
The  
icon is displayed at the top of the screen when a new text message is received. The  
icon is displayed  
when a new Picture message is received. The  
, icon is displayed when a new Email message is received. The  
icon is displayed when a new Voicemail message is received.  
Missed Messages Tab  
The Missed Messages Tab is an area that displays on the screen when a missed call, picture message, or voicemail is  
sent to the phone.  
View tabs for  
Missed Calls,  
Text Messages,  
and Voicemail  
41  
           
These View tabs display:  
Text message  
Missed Calls  
Voicemail  
Picture message  
You can search through missed calls or unviewed messages by using the Right and Left navigation keys to select the  
associated message tab, then pressing the Connect Call, or View soft key.  
,
Text Messages  
Short Message Service (SMS) allows you to send and receive short text messages to and from other mobile phones.  
The Message icon ( ) displays when you receive a new text message. When the memory is full, the message  
icon flashes on your phone and you cannot receive any new messages. You must delete a message before you can  
receive additional messages.  
Create message  
In this menu, you can write and send a text message.  
Creating a Simple Text Message  
1. In Idle mode, press Menu  
or  
Messaging Create message and press the Select soft key  
.
2. Highlight the Recipients field and press the Add soft key.  
3. Select one of the following options:  
Recent recipients: allows you to select a number or an address from the last 10 destinations you entered.  
Contacts: allows you to enter the phone number you want from your Contacts list.  
Groups: allows you to select a group.  
– or –  
Enter a phone number in the recipients field.  
4. Press the Down Navigation key and create your message.  
Messages  
42  
       
Note: For further details about entering characters, see “Changing the Text Input Mode” on page 29. The message can be up to 15  
pages long.  
5. Press the Options soft key when you finish entering your message. The following options are available:  
• Add recipients allows you to add Recent recipients, Contacts, or Groups.  
• Insert allows you to insert from the Text template, Text emoticon, Contacts, or Bookmarks. The Text template allows  
you to apply one of the preset message templates to the text. Select one of the 11 items stored in the Text messages  
Template menu. Emoticons allow you to insert an emoticon into your message. Contacts allows you to add names and  
phone numbers to your message. Bookmarks allows you to add Internet addresses to your message.  
• Add attachment: allows you to attach a File, Name card, Appointment, Anniversary, Private, Holiday, Important,  
Tasks, Memo, or Bookmarks to your message.  
• Copy & Paste: allows you to turn on the text selection feature so you can cut, copy, and paste text in this message.  
• More  
:
Add page: allows you to add a page, for example, another image or sound clip to the message.  
Add subject: inserts a subject field and text into the message.  
Sending options  
:
- Reply path: allows the recipient of your message to send you a reply message using your message center, if your network supports  
this service.  
- Request delivery report: allows you to activate or deactivate the report function. When this option is enabled, the network informs  
you whether your message was delivered.  
Select language: allows you to set the language to English or Français.  
• Save to: allows you to save this message to Drafts or Templates.  
• Exit composer: exits the composer.  
6. Press  
Picture Message  
This menu allows you to create a new picture message and then send it to one or more destinations.  
1. In Idle mode, press Menu Messaging Create message and press the Select soft key  
or  
to send this message.  
.
Tip: Quickly change the message type to Picture message by pressing the Down Navigation key and select Record sound, Add sound,  
Add picture, Take picture, or Add video, then advance to step 2.  
43  
     
2. Enter a phone number in the recipients field.  
– or –  
Highlight the Recipients field and press  
and select one of the following options:  
Recent recipients: allows you to select a number or an address from the last 10 destinations you entered.  
Contacts: allows you to enter the phone number you want from Contacts.  
Groups: allows you to select a group.  
3. Press the Down Navigation key and create your message.  
Note: For further details about entering characters, see “Changing the Text Input Mode” on page 29. The message can be up to 15  
pages long.  
4. Press the Options soft key when you finish entering your message. The following options are available:  
Preview: allows you to preview the message prior to sending. Note: This option displays after you enter text or attach  
an image file.  
Add recipients: allows you to add Recent recipients, Contacts, or Groups.  
Insert: allows you to insert from the Text template, Text emoticon, Contacts, or Bookmarks. The Text template allows  
you to apply one of the preset message templates to the text. Select one of the 11 items stored in the Text messages  
Template menu. Emoticons allow you to insert an emoticon into your message. Contacts allows you to add names  
and phone numbers to your message. Bookmarks allows you to add Internet addresses to your message.  
Add attachment: allows you to attach a File, Name card, Appointment, Anniversary, Private, Holiday, Important, Tasks,  
Memo, or Bookmarks to your message.  
View attachment: allows you to view any attachments that have been added. Note: This feature displays only if you  
have added attachments to this message.  
Note: This option displays after you enter text or attach an image file.  
Copy & Paste: allows you to turn on the text selection feature so you can cut, copy, and paste text in this message.  
Note: This feature displays only after you enter text into the message.  
Messages  
44  
• More:  
Note: Some options display after you enter text or attach an image file.  
Add page: allows you to add a page, for example, another image or sound clip to the message.  
Add subject: allows you to add a subject to this message.  
Edit style: allows you to change the background color, page duration, font color, or font style on the selected page or all pages.  
Sending options: allows you to set the Priority, Expiration, Request delivery report, Request read report, and Keep a copy options.  
Select language: allows you to set the language to English or Français.  
• Save to: allows you to save this message to Drafts or Templates.  
• Exit composer: exits the composer and displays the Create new screen.  
5. Press the Down Navigation key and select one of the following icons:  
Record sound: allows you to record a voice note to attach to this message.  
Add sound: allows you to attach a sound file or voice list and attach it to this message.  
Add picture: allows you to attach an image from the Images or Photos folder.  
Take picture: activates the camera so you can take a picture and attach it to this message.  
Add video: activates the camcorder so you can take a video and attach it to this message.  
6. Press  
to send this message.  
Message Inbox  
The Message inbox stores received messages. You can tell what kind of message was received by the icon displayed.  
If the icon envelope is open then the message was read, otherwise a closed envelope displays.  
The following types of messages may display in the Message inbox:  
Text message  
Picture message  
When you enter the Message inbox, the list of messages displays with the sender’s phone numbers, or names, if  
available in Contacts. After you read the message, the open envelope icon displays.  
Tip: Press the Left or Right Navigation keys to scroll between Inbox, Sentbox, and Drafts.  
In Idle mode, press Menu Messaging Inbox and press the Select soft key or  
.
45  
   
Viewing a Text Message from the Inbox  
1. In Idle mode, press Menu Messaging Inbox and press the Select soft key or  
.
2. Select a text message from the list and press the Options soft key.  
The following options display:  
Reply: allows you to send a reply to the sender by sending a message.  
Call back: allows you to call back the missed caller.  
Forward: allows you to forward the text message to another person.  
Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the  
number does not reside in the Contacts list. This option displays only if the contact does not already reside in the  
Contacts list.  
Delete: deletes the Selected, Multiple, or All text messages.  
Lock/Unlock: when messages store to the phone, this option allows you to lock the message to prevent deletion, or  
unlock it to allow deletion.  
More:  
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the  
SIM card. Depends on where the current message was saved.  
Move to my folders: allows you to move the picture message to a personal folder.  
Sort by: allows you to sort messages by Read/Unread, Date, Sender, Type, Subject, Size, and Lock/Unlock.  
3. Press  
to read the message contents.  
4. Press the Up or Down Navigation key to scroll through the contents.  
Press the Options soft key while reading a text message to display the following:  
Call back: allows you to call back the missed caller.  
Forward: allows you to forward the text message to another person.  
Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the  
number does not reside in the Contacts list. This option displays only if the contact does not already reside in the  
Contacts list.  
Delete: deletes the Selected message.  
Lock/Unlock: when messages store to the phone, this option allows you to lock the message to prevent deletion, or  
unlock it to allow deletion.  
Messages  
46  
   
Save to Templates: allows you to save the selected message as a Text Message template.  
More  
:
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the  
SIM card. Depends on where the current message was saved.  
Move to my folders: allows you to move the picture message to a personal folder.  
Print via Bluetooth: allows you to print the message using a Bluetooth enabled printer.  
Viewing a Picture Message from the Message Inbox  
1. In Idle mode, press Menu Messaging Inbox and press the Select soft key or  
.
2. Select a picture message from the list and press the Options soft key.  
The following options display:  
Reply: allows you to send a reply to the sender by sending a message.  
Call back: allows you to call back the recipient.  
Forward: allows you to forward the text message to another person.  
Delete: deletes the Selected, Multiple, or All messages.  
Lock/Unlock: allows you to lock the picture message to prevent deletion, or unlock it to allow deletion.  
More  
:
Move to my folders: allows you to move the picture message to a personal folder.  
Sort by: allows you to sort messages by Read/Unread, Date, Sender, Type, Subject, Size, and Lock/Unlock.  
Properties: allows you to view the message properties such as Date, From, To, Size, Priority, Delivery report, and Read report.  
3. Press  
to view the message contents.  
4. Press the Options soft key while viewing a picture message to display the following:  
Reply: allows you to send a reply to the sender by sending a message.  
Call back: allows you to call back the recipient.  
Forward: allows you to forward the text message to another person.  
Replay: allows you to replay the message.  
Save to Contacts: allows you to save the contact information to your Contacts list. This option displays only when the  
number does not reside in the Contacts list. This option displays only if the contact does not already reside in the  
Contacts list.  
47  
   
Delete: deletes the selected message.  
Save media: allows you to save the attached media to the Phone or Memory card.  
Lock/Unlock: allows you to lock the picture message to prevent deletion, or unlock it to allow deletion.  
Save to Templates: allows you to save the selected message as a Picture Message template.  
More  
:
Move to my folders: allows you to move the picture message to a personal folder.  
Print via Bluetooth: allows you to print the message using a Bluetooth enabled printer.  
Properties: allows you to view the message properties such as Date, From, To, Size, Priority, Delivery report, and Read report.  
Voicemail  
This menu helps you access your voice mailbox, if provided by your network. You can also setup Visual Voicemail  
from this menu.  
1. In Idle mode, press Menu Messaging Voicemail and press the Select soft key or the  
key.  
Important!: Before using the Voicemail feature, you must enter the voice server number obtained from your service provider in the Voice  
server number field.  
Note: Voicemail is a network feature and charges may apply. Please contact your service provider for further details.  
Instant Messaging (IM)  
Instant Messaging is a way of sending short, simple messages that are delivered real time to users online.  
Before using this feature, you need to subscribe to a messenger service. Your handset has 2 pre-loaded Messaging  
services (Windows Live Messenger, and Yahoo!).This message box stores messages that you may want to edit  
1. In Idle mode, press Menu Messaging IM.  
2. Select an account, and press the Select soft key or  
.
3. Enter a user ID and password information.  
4. Press  
to place a check mark next to Save password or Automatic sign-in, and press the Down Navigation  
key until Sign In displays.  
5. Press  
to sign in.  
Messages  
48  
           
Note: Contact your service provider for further details.  
Outbox  
This message box stores sent messages.  
When you enter this menu, the list of messages in the Sentbox displays with the recipients’ phone numbers or names,  
if available in Contacts.  
1. In Idle mode, press Menu  
Messaging  
Outbox and press the Select soft key or  
.
Note: Press the Left or Right Navigation keys to scroll between Inbox, Outbox, and Drafts.  
2. Select a message from the list and press  
to view or play the message contents.  
3. To scroll through the contents, press the Up or Down Navigation keys.  
4. Press Options and select one of the following options:  
Forward: allows you to forward the message to another person.  
Delete: deletes the Selected, Multiple, or All messages.  
Lock/Unlock: allows you to lock the selected message to protect it from deletion, or unlock it to allow deletion.  
More  
:
Move to phone/SIM card: allows you to move the message from the SIM card into the phone’s memory or from the phone onto the  
SIM card. Depends on where the current message was saved.  
Move to my folders: allows you to move the selected message to a personal folder.  
Sort by: allows you to sort the messages stored in this folder by Date, Recipient, Type, Subject, Size, and Lock/Unlock.  
If viewing a Picture message the following options display:  
Forward: allows you to forward the picture message to another person.  
Replay: allows you to replay the message.  
Delete: deletes the Selected message.  
Save media: allows you to save the attached media to the Phone or Memory card.  
Lock/Unlock: allows you to lock the picture message to prevent deletion, or unlock it to allow deletion.  
Save to Templates: allows you to save the selected message as a Picture Message template.  
More  
:
49  
     
Move to my folders: allows you to move the selected message to a personal folder.  
Print via Bluetooth: allows you to print the message using a Bluetooth enabled printer.  
Properties: displays the properties for the selected message including: Date, From, To, Size, Priority, Delivery report, and Read  
report.  
Drafts  
This message box stores messages that you can edit or send at a later time.  
When you enter this menu, the list of messages in the box displays.  
1. In Idle mode, press Menu  
Messaging Drafts and press the Select soft key or  
Sentbox, and Drafts  
.
Note: Press the Left or Right Navigation keys to scroll between Message inbox, Email  
,
.
2. Select a message from the list and press the Options soft key.  
The following options display:  
Send: sends the message to Recent recipients, Contacts, or Groups.  
Preview: displays a preview of the message.  
Note: This option only displays when you are viewing a picture message.  
Delete: deletes the Selected, Multiple, or All draft messages.  
Lock/Unlock: locks the selected message to protect it from deletion, or unlocks the message to allow deletion.  
More  
:
Move to my folders: allows you to move the draft to a personal folder.  
Sort by: allows you to sort the messages stored in this folder by Date, Recipient, Type, Subject, Size, and Lock/Unlock.  
Properties: allows you to view the properties of the selected message.  
Note: This option only displays when you are viewing a picture message.  
3. Press  
to edit the message contents.  
Messages  
50  
   
4. Press the Options soft key while viewing a message to display the following:  
Note: Some options apply to Text messages, and other options apply to Picture messages only.  
Preview: allows you to preview the selected message. Note: This option displays only when viewing a picture  
message.  
Add recipients: allows you to add Recent recipients, Contacts, or Groups.  
Insert: allows you to insert a Text template, Text emoticon, Contacts, or Bookmarks into the selected message  
prior to sending.  
Add attachment: allows you to add a File, Name card, Appointment, Anniversary, Private, Holiday, Important,  
Tasks, Memo, or Bookmarks to this message.  
Copy & Paste: allows you to turn on the text selection feature so you can cut, copy, and paste text in this message.  
Note: This option works only in text message mode.  
More  
:
Add page: allows you to add a page, for example, another image or sound clip to the message.  
Add subject: allows you to add a subject to the selected picture message.  
Edit style: allows you to change the background color, page duration, font color, or font style on the selected page or all pages.  
Sending options: these options vary depending on the type of message:  
-
Reply path: allows the recipient of your message to send you a reply message using your message center, if your network supports  
this service.  
-
-
-
Priority: select the priority level of your messages.  
Expiration: select the length of time you want the message to remain on the MMS server.  
Request delivery report: allows you to activate or deactivate the report function. When this option is enabled, the network  
informs you whether your message was delivered.  
-
-
Request read report: when this option is enabled, your phone sends a request for a reply along with your message to the recipient.  
Keep a copy: specify whether you want to keep a copy of the sent messages on your phone.  
Select language: allows you to set the language to English or Français.  
• Save to: allows you to save this message to the Drafts or Templates folder.  
• Exit composer: allows you to exit the edit feature and return to the Drafts folder.  
5. Press  
6. Press  
(while viewing the message) to send the message.  
to return to the Idle screen.  
51  
My Folders  
Use My Folders to manage and organize your messages and store them on your phone.  
1. In Idle mode, press Menu  
Messaging  
My folders and press  
.
To create a new folder  
:
1. Press Create  
.
2. Enter the title of the folder and press the OK soft key.  
The newly created folder displays on the My folders screen.  
Templates  
Besides entering message text using the keypad keys, you can speed message composition by including copies of  
stored text (Templates) in your message.  
In Idle mode, press Menu  
Messaging Templates and press the Select soft key or  
.
The following options are available:  
Text message templates  
Picture message templates  
Sending a Text message template  
1. In Idle mode, press Menu  
key or  
Messaging Templates Text message templates and press the Select soft  
.
2. Select a template from the Templates list and press  
to send this selected template.  
3. Enter a recipient in the Recipient field or press  
and select one of the following options:  
Recent recipients: allows you to select a number or an address from the last 10 destinations you entered.  
Contacts: allows you to enter the phone number you want from Contacts.  
Groups: allows you to send this message to a group.  
4. After selecting a recipient, press the Send soft key.  
The template message sends to the select recipient(s).  
Messages  
52  
           
Sending a Picture message template  
1. In Idle mode, press Menu  
key or  
2. Press Create  
Messaging Templates Picture message templates and press the Select soft  
.
.
3. Press the Up Navigation key and enter a subject in the Subject field.  
4. Press the Down Navigation key and enter a text message.  
5. Press the Down Navigation key and select one of the following options:  
Record sound: allows you to record a voice note to attach to this message.  
Add sound: allows you to attach a sound file or voice list and attach it to this message.  
Add picture: allows you to attach an image from the Photos folder.  
Take picture: activates the camera so you can take a picture and attach it to this message.  
Add video: activates the camcorder so you can take a video and attach it to this message.  
6. Press  
7. Press Options Send and press  
8. Enter a recipient in the Recipient field, or press  
to save the picture message template.  
.
and select one of the following:  
Recent recipients: allows you to select a number or an address from the last 10 destinations you entered.  
Contacts: allows you to enter the phone number you want from your Contacts list.  
Groups: allows you to send this message to a group.  
9. After you select a recipient, group, or Contacts, press  
or the Send soft key.  
The template message sends to the select recipient(s), or selected destination.  
Settings  
The Settings menu allows you to select where your contacts are saved, delete messages by folder, or check your  
memory status.  
In Idle mode, press Menu  
Messaging  
Settings and press the Select soft key or  
.
Text message  
The following Sending Options are available:  
53  
       
Reply path: allows the recipient of your message to send you a reply message using your message center, if your network  
supports this service.  
Request delivery report: allows you to activate or deactivate the report function. When this function is activated, the network  
informs you whether your message was delivered.  
Text Message Center  
Sets the default method of text message transmission used by the Text message center. The options are:  
Center 1  
Center 2  
Center 3  
Picture message  
Sending Options  
Priority: allows you to set the message priority: high, normal or low.  
Expiration: allows you to select the length of time for your message to remain on the MMS server: Maximum, 1 day, 2 days, 1  
week, 2 weeks, Custom time (hour).  
Message size: allows you to set a size limit for your message: 30 KB, 100 KB, 300 KB, or 600 KB.  
Request delivery report: when this option is enabled, the network informs you whether your message was delivered.  
Request read report: when this option is enabled, the network informs you when your message is read.  
Keep a copy: when this option is enabled, a copy of your message is stored.  
Add my name card: allows you to add your name card to your message.  
Receiving Options  
Home Network: allows you to set the network to the Home network  
.
Roaming Network: allows you to set the network to the Roaming network  
.
Send read report: when this option is enabled, your phone sends a notification back to the recipient indicating that your message  
was received.  
Send delivery report: when this option is enabled, the phone informs the network whether your message was received.  
Reject anonymous: automatically rejects messages with a category of anonymous.  
Reject advertisement: automatically rejects messages with a category of advertisement.  
Auto Resize Image  
No Resize  
Messages  
54  
       
100 KB  
300 KB  
600 KB  
Creation mode  
Free  
Warning  
Restricted  
Default Style  
Font color  
Font style  
Background color  
Page duration  
Voicemail  
This menu displays the default phone number used for access of phone’s remote voicemail.  
Broadcast message  
Activation: you can specify whether to turn activation On or Off  
Receiving channels: you can specify the broadcast message receiving channels to All channels or My channels  
Language: you can specify the language to All, English, Français, or Español.  
.
.
Push message  
Receiving options: you can specify whether to turn push message reception On or Off  
.
Service loading: you can specify whether to load this service:  
Always  
Prompt  
Never  
Delete by folder  
This menu allows you to delete all of the messages in each message box. Or, you can also delete all of your  
messages in all message boxes at one time.  
55  
           
Important!: Once messages are deleted, they cannot be recovered.  
1. In Idle mode, press Menu Messaging Delete by folder and press the Select soft key or  
.
2. Press the Up or Down Navigation key to select a message box to clear. To delete all of your messages, select  
the All option.  
3. Press  
to place or remove a check mark.  
4. Press the Delete soft key to delete the marked objects.  
5. At the Delete? confirmation prompt, mark or unmark Locked messages  
6. Press Yes to delete or press Cancel to cancel.  
.
Memory status  
To view the memory status:  
In Idle mode, press Menu  
Messaging  
Memory status and press the Select soft key or  
.
You can view the amount of allocated memory and the memory available for picture messages.  
Note: Press the Left or Right Navigation keys to scroll between Picture message, Text message, Push message, and Configuration.  
The display shows the total space including the used and free space. You can also view how much space and the  
number of messages currently occupying each message box type:  
Picture message  
Text Message (saved on the phone)  
Push message  
Configuration  
Inbox  
Inbox  
Inbox  
Inbox  
Outbox  
Drafts  
Outbox  
Drafts  
My folders  
My folders  
My folders  
My folders  
Messages  
56  
 
Section 8: My Downloads  
This section outlines the various applications that are available on your phone. The My downloads menu allows you to  
manage your images, videos, sounds, games and apps, other files, and memory status in one convenient location.  
In Idle mode, press Menu My Downloads.  
Photos  
In this menu you can review the photos you’ve taken.  
1. In Idle mode, press Menu My Downloads Photos and press the Select soft key or  
.
2. Highlight a photo from the list and press the Options soft key:  
• Send via: allows you to send the photo as a Message or to another Bluetooth compatible device.  
• Set as: allows you to set the photo as a Picture D or as Wallpaper.  
• Delete: allows you to delete the Selected, Multiple, or All photos.  
• Move: allows you to move the Selected photo or Multiple photos to another location or folder.  
• Copy: allows you to copy the Selected photo or Multiple photos to another location or folder.  
• Rename: allows you to rename the photo.  
Take photo: allows you to take a new photograph.  
• Create folder: allows you to create a new folder to store the selected photo or multiple photos.  
• Sort by: allows you to sort photos by Date, Type, Name, and Size.  
• Bluetooth visibility: allows you to select one or multiple sounds to share with other Bluetooth devices.  
• Print via Bluetooth: sends the selected photo to a Bluetooth enabled device.  
• Lock/Unlock: allows you to lock the photo to protect it from deletion or unlocks it to allow deletion.  
• Properties: displays the image Name, Format, Resolution, Size, Forwarding, Date created, and Location.  
Music  
In this menu, you can view the list of music files on the phone and memory card.  
1. In Idle mode, press Menu My Downloads Music and press the Select soft key or  
.
2. Select a music file and press the Options soft key to choose from the following options:  
• Send via: allows you to send the selected music file via Message or to a Bluetooth enabled device.  
57  
               
• Set as: allows you to set the music file as a Ringtone, Individual ringtone, or Alarm tone.  
• Delete: allows you to delete the Selected, Multiple, or All music files.  
• Move: allows you to move the selected music file or multiple files to another location or folder.  
• Copy: allows you to copy the selected music file or multiple files to another location or folder.  
• Rename: allows you to rename the selected music file.  
• Create folder: allows you to create a folder in which to store the selected music file.  
• Sort by: allows you to sort the music by Date, Type, Name, or Size.  
• Bluetooth visibility: when the music file is stored to the phone this option allows you to select one or multiple music files to share  
with other Bluetooth devices.  
• Lock/Unlock: allows you to lock the music file to protect it from deletion or unlocks it to allow deletion.  
• Properties: displays Basic details about the selected music file such as Name, Format, Size, Forwarding, Date created, and  
Location.  
Images  
In this menu, you can view the list of images downloaded from the web server or received in messages. You can set  
an image as the current background image.  
1. In Idle mode, press Menu My Downloads Images and press the Select soft key or  
.
The following options are available:  
Get New Wallpapers  
Using the Get new Wallpapers option allows you to access your service provider’s website to download new images  
using the web browser.  
Note: When downloading Wallpapers, charges may apply.  
Wallpapers  
This folder contains pre-configured wallpapers.  
Scroll to the wallpaper you want to view and press the Options soft key to access the following options:  
• Set as: allows you to set the image as a Picture ID or as Wallpaper.  
Take photo: allows you to take a photo and use that as a wallpaper.  
• Create folder: allows you to create a new folder in which to contain your own images.  
My Downloads  
58  
         
• Sort by allows you to sort the images by Date, Type, Name, or Size.  
:
• Properties: displays Basic details about the selected wallpaper such as Name, Format, Size, Forwarding, Date created, and  
Location.  
Sounds  
Get New Ringers  
Using the Get new Ringers option allows you to access your service provider’s website to download new ringtones  
using the web browser.  
Note: When downloading ringtones, charges may apply.  
Sounds  
Highlight an item in the Sounds menu and press the Options soft key. The following options are available:  
Set as: allows you to set the sound as a Ringtone, Individual ringtone, or Alarm tone.  
Create folder: allows you to create a new folder in which to contain sounds.  
Sort by: allows you to sort sound files by Date, Type, Name, or Size.  
Properties: displays Basic details about the selected sound file.  
Voice list  
The Voice list contains your recorded audio messages. Highlight an item and press the Options soft key. The following  
options are available:  
Send via: allows you to send the audio message as a Message or to a Bluetooth compatible device.  
Set as: allows you to set the audio message as Ringtones, Individual ringtone, or Alarm tone.  
Delete: allows you to delete the Selected, Multiple, or All audio messages.  
Move: allows you to move the Selected or Multiple audio messages to another location or folder.  
Copy: allows you to copy the Selected or Multiple audio messages to another location or folder.  
Rename: allows you to change the name of the audio message.  
Create folder: allows you to create a new folder in which to contain audio messages.  
Sort by: allows you to sort audio files by Date, Type, Name, or Size.  
Bluetooth visibility: allows you to select one or multiple voice messages to share with other Bluetooth devices.  
Lock/Unlock: allows you to lock the audio message to protect it from deletion or unlocks it to allow deletion.  
Properties: displays Basic details about the selected audio file.  
59  
       
Videos  
In this menu, you can view the list of videos downloaded from the web server or received in picture messages. You  
can also view a video saved to your Videos folder or memory card.  
This menu allows you to access your saved videos.  
1. In Idle mode, press Menu My Downloads Videos and press the Select soft key or  
.
2. Highlight a video file and press  
to play it.  
– or –  
Before you play the video press Options and select one of the following:  
• Send via: sends the video using a Message or to a Bluetooth enabled device.  
• Delete: deletes the Selected, Multiple, or All video files.  
• Move: allows you to move the Selected or Multiple videos to another location.  
• Copy: allows you to copy the Selected or Multiple videos to another location.  
• Rename: changes the name of the video.  
• Create folder: allows you to create a new folder to contain your videos.  
• Sort by: allows you to sort and view videos by Date, Type, Name, or Size.  
• Bluetooth visibility: allows you to enable the Selected video or Multiple videos so they are visible to other Bluetooth devices.  
• Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock it to allow deletion.  
• Properties: shows the properties of the video, such as the Name, Format, Resolution, Size, Forwarding, Date created,  
and Location.  
3. While viewing the video press Options and choose one of the following:  
• Jump to track time: allows you to jump to a specific track time. Enter the time in HH:MM:SS format.  
• Send via: allows you to send this video as a Message or to a Bluetooth enabled device.  
• Properties  
:
shows the properties of the video, such as the Name, Format, Resolution, Size, Forwarding, Date created, and  
Location.  
Games and Apps  
Get New Games  
You can download more games from your service provider’s website.  
My Downloads  
60  
         
1. In Idle mode, press Menu My Downloads Games and Apps Get New Games and press the Select  
soft key or . The web browser launches.  
2. When downloading games, charges may apply.  
Get New Applications  
You can download more applications from your service provider’s website.  
1. In Idle mode, press Menu My Downloads Games and Apps Get New Applications and press the  
Select soft key or  
. The web browser launches.  
2. When downloading applications, charges may apply.  
Instant Messaging  
You can connect to an instant messaging service from your service provider’s website.  
In Idle mode, press Menu My Downloads Games and Apps Instant Messaging and press the Select soft  
key or . The web browser launches.  
Email  
You can connect to an email service from your service provider’s website.  
In Idle mode, press Menu My Downloads Games and Apps Email and press the Select soft key or  
.
The web browser launches.  
Other Files  
This option allows you to view other types of files that you have stored on your phone. This includes Excel  
spreadsheets, text files, PowerPoint presentations, PDFs, and Word documents. You can move or copy the files to  
your memory card, as well as send them to other Bluetooth enabled devices, or enable the file for Bluetooth visibility.  
The Open Source Announcement is included in this option.  
Memory Status  
You can check the amount of memory used and available memory on the phone for photos, music, images, videos,  
sounds, other files, and games and apps.  
61  
             
Section 9: Tools  
The Tools menu allows you to set alarms, schedule appointments, view the calendar, create Tasks, perform simple  
math calculations, check world time, perform unit conversions, set a timer, and use a stopwatch.  
Calendar  
With the Calendar feature, you can:  
Consult the calendar by month, week, or day.  
Note Appointments, Anniversaries, Holidays, Important events, or Private event.  
Set an alarm to act as a reminder, if necessary.  
Check your memory status.  
To navigate to the Calendar:  
In Idle mode, press Menu Tools Calendar and press the Select soft key or  
.
When you select the Calendar the first view is the Month view.  
Month view  
With the Month view displayed, press the Options soft key to display the following options:  
View: displays the selected date view.  
View by: displays the Day view or Week view for the selected day.  
Create: allows you to create an Appointment, Anniversary, Holiday, Important, or Private event.  
Go to: displays Today’s date or the date you entered.  
Event list: displays a list of selectable events such as: Appointments, Anniversaries, Holidays, Important, or Private.  
Delete: allows you to delete Selected, Period, This week, Before date or All.  
Settings: allows you to configure calendar viewing settings such as the Starting day (of the week) and View by.  
Missed alarm events: displays a list of missed alarm events.  
Memory status: displays the number of calendar events you presently have and how many events you can create for each  
category. For example: 0/50 means you used zero of fifty available events for this category.  
Week view  
With the Week view displayed, press the Options soft key to display the following options:  
View by: displays the Day view or Month view.  
Create: allows you to create an Appointment, Anniversary, Holiday, Important, or Private event.  
Tools  
62  
     
Go to: displays Today’s date or the date you entered.  
Event list: displays a list of selectable events such as: Appointments, Anniversaries, Holidays, Important, or Private.  
Delete: allows you to delete Selected, Period, This month, Before date or All.  
Settings: allows you to configure calendar viewing settings such as the Starting day (of the week) and View by.  
Missed alarm events: displays a list of missed alarm events.  
Memory status: displays the number of calendar events you presently have and how many events you can create for each  
category. For example: 0/50 means you used zero of fifty available events for this category.  
Day view  
With the Day view displayed, press the Options soft key to display the following options:  
1. Press Options to view the following options:  
• Create: allows you to create an Appointment, Anniversary, Holiday, Important, or Private event.  
• View by: displays the Week view or Month view.  
• Event list: displays a list of selectable events such as: Appointments, Anniversaries, Holidays, Important, or Private.  
• Settings: allows you to configure calendar viewing settings such as the Starting day (of the week) and View by.  
• Missed alarm events: displays a list of missed alarm events.  
• Memory status: displays the number of calendar events you presently have and how many events you can create for each category. For  
example: 0/50 means you used zero of fifty available events for this category.  
Missed alarm events  
You can check on all of the events that you have set an alarm on.  
1. In Idle mode, press Menu Tools Calendar and press Select or  
2. Press Options Missed alarm events and press Select or  
.
.
3. To view event information, highlight an event and press  
.
The missed alarm event information displays.  
4. To acknowledge and remove the event, press the Confirm soft key or  
. The event is removed from the  
Missed alarm events menu.  
Memory status  
This menu item shows the number of calendar events that are stored on the handset as well as the total number of  
available events. Example: 2/100 means that currently there are two alarm events scheduled out of a possible 100.  
63  
Alarm  
This feature allows you to:  
Set up to 3 alarms to ring at specified times.  
Set the phone to switch on automatically and ring the alarm even if the phone is switched off.  
The following options are available:  
Alarm 1: set the Name, Alarm activation, Alarm time, Alarm type, Alarm tone, Alarm volume, Day, Snooze, and Repeat for  
this alarm.  
Alarm 2: set the Name, Alarm activation, Alarm time, Alarm type, Alarm tone, Alarm volume, Day, Snooze, and Repeat for  
this alarm.  
Alarm 3: set the Name, Alarm activation, Alarm time, Alarm type, Alarm tone, Alarm volume, Day, Snooze, and Repeat for  
this alarm.  
Auto power: alarm rings at the specified time even if the phone is turned off. If the option is set to Off, the alarm does not ring.  
To set the alarm:  
1. In Idle mode, press Menu Tools Alarm and press the Select soft key or  
.
2. Select an alarm and press the Select soft key or  
3. Highlight the Name field, and press to backspace, then enter a new name for this alarm (if desired).  
4. Press the Down Navigation key and highlight the Alarm activation field.  
5. Press the Right Navigation key to select On  
6. Press the Down Navigation key to highlight the Alarm time option. Enter the time you want the Alarm to sound.  
.
.
7. Press the Down Navigation key to highlight the Alarm type option and press  
. Select one of the following  
alarm types:  
• Melody: the alarm rings using the selected ring melody.  
• Increasing melody: the volume of the melody increases.  
• Vibration: the phone vibrates but does not play a tone.  
• Vibration then melody: the phone vibrates 3 times and then starts playing a melody.  
• Vibration and melody: the phone vibrates and plays the melody simultaneously.  
• Vibration and increasing melody: the phone vibrates and increases the volume of the melody.  
Tools  
64  
     
8. Press the Down Navigation key to highlight the Alarm tone field. Press  
to choose, then press Select or  
to display a list of tones from which  
to display a list of days.  
.
9. Press the Down Navigation key to highlight the Alarm volume field.  
10. Press the Left or Right Navigation key to decrease or increase the volume.  
11. Press the Down Navigation key to highlight the weekday checkboxes. Press  
12. Press  
Tuesday, Wednesday, Thursday, Friday, or Saturday. Press  
13. Press OK to confirm your selections.  
14. Press the Down Navigation key to highlight the Snooze field. Press the Right Navigation key to select one of the  
following times: Off 1 min 3 min 5 min 7 min, or 10 min  
15. Press the Down Navigation key to highlight the Repeat field. Press the Right Navigation key to select one of the  
following times: 1 time 2 times 3 times 5 times, or 10 times  
to place a checkmark next to one of the following selections: Everyday, Once only, Sunday, Monday,  
to place or remove a check mark.  
,
,
,
,
.
,
,
,
.
16. Press  
to confirm your settings.  
to return to Idle mode.  
17. Press  
18. To stop the alarm when it rings, press any key or press the Snooze soft key.  
Voice Recognition  
Voice Recognition is advanced speech recognition software used to activate a wide variety of functions on your phone.  
Nuance software automatically voice activates (up to 1,000 contacts) for voice dialing and searching. No prerecording  
or training needed. Speak a contact name naturally to dial, and use your voice to look up contacts, launch applications  
and navigate phone menus.  
1. In Idle mode, press Menu Tools Voice Recognition and press Select or  
.
2. At the voice prompt, say a command. The list of available commands is listed below.  
Note: This list of voice commands is briefly displayed.  
65  
   
Say a Command Options  
Call <Name or #>  
the name and the number type (location).  
Send Text <Name or #> displays the Create Text Message screen.  
Lookup <Name> allows you to use a voice command to locate and display contact information stored in the Contacts list. For  
Go to <App> accesses all the features of your phone if they are activated, such as: Web, Calendar, Ringtones, Tasks, Contacts,  
Voicemail, and Games and Apps.  
Check <Item> lets you check your phone's status in the same report (Status, Messages, Missed Calls, Time, Signal Strength,  
Network, Battery, My Phone Number, and Volume).  
While the Say a command screen displays you have two options:  
:
dials a name or number listed in your contact list. If multiple numbers exist (such as home, work, or other) say  
:
:
:
:
Tutorial: provides examples of how to use the voice commands.  
Settings: lists the settings for voice command software such as: Confirmation, Adaptation, Audio Modes, Speakerphone,  
and About.  
If the phone does not recognize your command the Command not recognized press Settings  
Restart. The Restart  
command allows you to try to command options again.  
Speak clearly when giving your command. There is no need for you to speak slowly or with added emphasis. The  
voice recognition software has been optimized to understand your speech in its natural form. If it does not recognize  
your command after a few seconds, a voice prompt asks you to repeat the command. If it does not recognize your  
command again, the following message displays “Sorry, no match found,” and voice recognition turns off.  
Important!: You must end your current Voice Commands call before you can make another call.  
Voice Recognition Tips  
Wait for the tone before you speak.  
Speak clearly and at a normal volume.  
There is no need to use paused speech. The voice recognition software has been trained to recognize natural speech, and  
performs best when you speak naturally.  
In very noisy environments, it may be helpful to use the supplied earset or optional Bluetooth headsets.  
Tools  
66  
 
Contacts List Voice Activation  
On startup Nuance reads your Contacts list and voice-activates all the names.  
When you have add or change contacts, Nuance automatically reloads and voice-activates the list when you add or  
modify a contact.  
Name Dialing  
To use Name Dial, you need contacts stored in Contacts. For more information, refer to “Using the Contacts List”  
To access Voice recognition  
:
1. In Idle mode, press Menu Tools Voice recognition.  
2. Say “Call” followed by the first and last name of the contact that you want to dial.  
The name that you said is repeated through the earpiece and your phone dials the number.  
3. If Nuance is not sure of the name that you said, “Try Again?” displays on the screen.  
4. You are asked to confirm the correct name as Nuance displays the results. Say “Yes” or “No” to confirm or reject  
the number when prompted.  
The location repeats through the earpiece and your phone dials the number.  
Send Text Message  
To access Voice recognition:  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. Say “Send Text” at a distance of 3-8 inches from the microphone. “Say the Name” plays through the earpiece.  
3. After you say a name, you might be prompted, “Did you say send text?To confirm a name, wait for the beep and  
then say “Yes.”  
4. When the Text Message client launches, compose your text message.  
Name Lookup  
To perform a name lookup, you have to have some entries in your Contact list.  
67  
     
To access Voice recognition:  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. Say “Lookup” at a distance of 3-8 inches from the microphone. “Say the name” plays through the earpiece.  
3. Say the name exactly as it displays in Contacts, first name followed by last name.  
4. The contact name displays on the screen with other information that you have entered for that contact.  
Opening Applications  
You can open an application or access a menu on your phone using Voice recognition.  
To access Voice recognition:  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. Say “Go To” at a distance of 3-8 inches from the microphone. A list of options displays.  
Note: You can also say, “Go To” followed by the name of the application, for example, “Web”.  
The spoken application menu option activates.  
Checking Phone Status  
Use the Check command to see and hear status information from your phone, including its phone number, status,  
current signal strength, and battery level.  
To check phone status:  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. Say “Check” at a distance of 3-8 inches from the microphone. A list of options displays.  
The spoken application menu option displays.  
Tools  
68  
   
Voice Recognition Settings  
Confirmation  
Nuance uses a confirmation list when a name or number is not clearly recognized. The software displays three choices  
and prompts you to select a choice.  
You can modify the way Nuance uses the confirmation list in the settings. Each time Nuance activates you can choose  
to view the confirmation list even if there is only one choice. Additionally, you can choose never to view a confirmation  
list, even if there are multiple choices. When the name or number you speak is not recognized, the Automatic setting  
displays the confirmation list.  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. From the “Say a command” screen, press Settings  
Confirmation.  
3. Select one of the following options:  
• Automatic: Nuance displays a confirmation list only when it is not sure if it has correctly recognized the name or number.  
• Always Confirm: Nuance always displays a confirmation list, even when there is only one choice.  
• Never Confirm: Nuance never displays a confirmation list.  
Adaptation  
If Nuance frequently does not recognize your commands, adapting digit dialing to your voice improves the accuracy of  
digit recognition.  
After you adapt Digit Dial, your phone recognizes only your voice. Other users are not able to use the handset with  
Nuance unless the handset is reset to factory defaults.  
Adapting requires recording multiple sequences of digits. The entire adaptation process takes approximately one  
minute.  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command” message.  
2. From the “Say a command” screen, press Settings  
3. Press Adapt Voice  
Adaptation.  
.
69  
   
4. The screen displays an adaptation message. The entire adaptation process takes just a couple of minutes to  
complete.  
Tip: Perform the adaptation process in a quiet room.  
5. Press Start to being adaptation or press Back to cancel.  
Audio Modes  
Your voice recognition software includes an interface that allows you to customize your voice recognition, mode setting  
to match your experience and comfort level with voice commands. You can select one of three levels, Expert mode,  
Prompt mode, or Readout mode.  
Voice recognition provides a three modes or settings, Expert mode, Prompt mode and Readout mode. Using Modes,  
you can select your user level.  
1. In Idle mode, press Menu Tools Voice Recognition.  
After a brief pause, a list of available commands displays on the screen along with the “Say a command”  
message.  
2. From the “Say a command” screen, press Settings  
3. Press one of the following options:  
Audio Modes.  
• Expert Mode: turns off the voice and text prompts.  
• Prompt Mode: this is the default mode. Uses a voice prompt to confirm your selection and also displays a confirmation screen.  
• Readout Mode: displays an on-screen prompt with voice.  
Speakerphone  
The Speakerphone feature allows you to configure speakerphone as Always on, Always off or you can automatically  
connect to the speakerphone by selecting Automatic.  
About  
The About option displays information about Nuance including version number, LVR number, build number, and device  
number.  
Tasks  
This feature allows you to enter a task list.  
Tools  
70  
         
1. In Idle mode, press Menu Tools Tasks and press the Select soft key or  
2. Press Options Create to create a new task.  
.
3. Enter a short description of the task in the Title field then press the Down Navigation key.  
4. Enter a short description in the Details field and press the Down Navigation key.  
5. Continue to enter other information including Start date, Due date, Alarm, Alarm date, Alarm time, Alarm tone  
and Priority.  
6. Press Save when you are finished. Your Task list saves to the Calendar.  
Editing the Tasks List  
When you select the Tasks list menu, the current contents display with a status checkbox and a priority marker.  
If the item was done, a check displays in the checkbox.  
High priority items display a “1” triangle icon, Normal priority items display a “2” triangle icon, and Low priority items  
display a “3” triangle icon.  
1. In Idle mode, press Menu Tools Tasks and press the Select soft key or  
2. Highlight a task from the list, then press  
3. Highlight a field to edit and press  
4. Edit the items you want to change and press  
Memo  
.
.
.
when your edits are complete.  
This option allows you to create notes to add to your events.  
1. In Idle mode, press Menu Tools Memo and press the Select soft key or  
.
2. Press Options  
Create and press  
to create a new memo.  
A blank Memo screen displays.  
3. Enter your text and press  
Calculator  
to save.  
With this feature, you can use the phone as a calculator. The calculator provides the basic arithmetic functions;  
addition, subtraction, multiplication, and division.  
71  
       
1. In Idle mode, press Menu Tools Calculator and press the Select soft key or  
.
2. Enter the first number using the numeric keys.  
3. Use the Navigation keys to select the calculation method, according to the illustration on the display.  
4. Enter the second number using the numeric keys.  
Note: Press the Left soft key to insert a decimal point, or press it multiple times to create brackets. Press  
less-than sign, or press to enter the greater-than sign.  
to enter the  
5. Press  
to view the result.  
Repeat steps 1 to 4 as many times as required.  
Tip calculator  
This feature provides the percentage amount for tip. Use the following procedures to calculate a tip amount.  
1. In Idle mode, press Menu Tools Tip calculator and press the Select soft key or  
.
2. In the Bill field, enter the check amount.  
Note: Press  
to enter a decimal point for the exact dollar amount.  
3. Use the Down Navigation key to highlight Tip(%) percentage. 15 is the default value but you can change  
this value.  
The Tip($) field value calculates according to the values entered.  
4. Use the Down Navigation key to move to the # paying field to change the number of people contributing to the  
tip amount.  
5. The You pay field displays the total for each individual.  
World Clock  
This feature allows you to find out what time it is another part of world, using the Left and Right Navigation keys.  
You can set many time lines. For example, you can set the first setting to your home city and then use the other  
settings to check other city times.  
1. In Idle mode, press Menu Tools World clock and press the Select soft key or  
.
Tools  
72  
       
2. Press Options  
Add to create a new time zone.  
3. Press the Left or Right Navigation key until the desired GMT time zone displays in the field.  
4. Press the Down Navigation key and press  
to place a check mark in the Daylight saving checkbox (if  
applicable).  
5. Press OK to confirm your settings.  
Converter  
The conversion menu provides the following conversion categories:  
Currency  
Length  
Weight  
Volume  
Area  
Temperature  
To convert a currency, length, weight, volume, area, or temperature, do the following:  
1. In Idle mode, press Menu Tools Converter and press the Select soft key or  
.
2. Scroll to the conversion feature you want to use and press the Select soft key or  
.
3. Use the Up, Down, Left, and Right navigation keys to select the From and To units of measure for the quantity  
you want converted.  
Tip: Press  
to insert a decimal point.  
4. Press the Back soft key to return to the Unit conversion menu.  
Timer  
You can use this menu to set a timer. To enable the Timer, use the following options:  
1. In Idle mode, press Menu Tools Timer and press the Select soft key or  
.
2. Press the Set soft key and enter the length of time as HH:MM:SS and press OK  
.
3. Press key to start the timer. Press to pause the timer.  
73  
       
4. Press  
when you are finished.  
Stopwatch  
This feature allows you to use a stopwatch. Press Reset to erase all previously recorded stopwatch times. Press  
to start the stopwatch. Press Stop to stop recording the lap time. Press Lap to start a new lap time. You can  
view up to 50 lap times.  
In Idle mode, press Menu Tools Stopwatch and press the Select soft key or  
.
Tools  
74  
   
Section 10: Web  
This section outlines the web features available on your phone.  
Browser  
Your phone is equipped with a browser, which provides you wireless access and navigation to the Web using your  
phone.  
Press Menu  
Web and press the Select soft key or  
.
Tip: From the Home screen, press the Web soft key to launch the browser.  
The following options are available:  
Home  
Selecting this menu connects the phone to the network and loads the homepage.  
The content of the startup homepage depends on your Wireless Web service provider. To scroll through the screen,  
use the Up and Down keys.  
To go to the startup homepage from any other screen in the browser, use the Home option. For more information on  
In Idle mode, press Menu  
Web  
Home and press the Select soft key or  
.
Exiting the browser  
1. To exit the browser at any time, simply press  
.
2. At the Exit Browser? prompt, press Yes to exit or No to remain in the browser.  
Navigating the browser  
1. To scroll through browser items, press the Up or Down Navigation key.  
2. To select browser items, press  
.
3. To return to the previous page, press the Back soft key or  
.
4. Press the Back soft key until the startup Home page displays.  
75  
           
Entering Text in the browser  
When you are prompted to enter text, the currently active text input mode is indicated on the screen. The following  
modes are available:  
A Eng (ABC): this mode allows you to enter letters by pressing the key labeled with the corresponding letter.  
T9 (English): this mode allows you to enter words with only one keystroke per letter. Each key on the keypad has more than one  
letter; for example, you press  
to enter J, K, or L. However, the T9 mode automatically compares the series of keystrokes  
you make with an internal linguistic dictionary to determine the most likely word, thus requiring fewer keystrokes than the  
traditional ABC mode.  
Numeric: this mode allows you to enter numbers. (Numeric displays on the external screen only).  
Symbol: this mode allows you to enter symbols, such as punctuation marks.  
Tip: Press and hold  
(portrait mode) or  
+
(landscape mode) to enter symbols in upper-case or lower-case character  
mode.  
To change the text input mode, use the following procedures:  
1. Press the Right soft key, highlight the desired text entry mode and press the Select soft key or  
.
2. To enter a space, press  
3. To edit text, set the cursor to the right of the character(s) to be corrected.  
4. Press (portrait mode) or (landscape mode) as required.  
(portrait mode) or  
(landscape mode).  
5. Enter the correct character(s).  
Selecting and Using Menu Options  
Various menus are available when you are navigating the Web.  
To access the browser options menu:  
1. Press the Options soft key.  
Note: The menus may vary, depending on your browser version.  
The following options are available:  
Reload: reloads the current page.  
Resize page: allows you to manually resize the page by sliding the size bar to the left or right.  
Web  
76  
                 
Forward: pages forward one page.  
Go to: navigates to the URL address, Homepage, Bookmarks, History, or Saved page.  
Save: allows you to save the Image or Page.  
Add to bookmarks: adds the current URL to Bookmarks.  
Send URL via message: sends the currently viewed URL to a recipient as a message.  
Page details: allows you to view details about the current page such as: Title, Address, Size, MIMEtype, and Last updated.  
Browser settings: various settings are available, see “Browser Settings” on page 78.  
Exit browser: exits the browser page you are viewing and returns to the Home page.  
Enter URL  
This menu allows you to manually enter the URL address of a web site that you want to access.  
In Idle mode, press Menu  
Web  
Enter URL and press the Select soft key or  
.
Note: For further details about entering characters, see “Entering Text” on page 28.  
Bookmarks  
This menu stores up to 50 URL addresses.  
To store a URL address:  
1. In Idle mode, press Menu  
Web Bookmarks and press the Select soft key or  
.
2. Press Options Add bookmark and press the Select soft key or  
.
3. Enter a name for the bookmark in the Title field and press the Down key.  
Note: For further details about how to enter characters, see “Entering Text” on page 28.  
4. Enter the address in the URL field and press  
.
5. Highlight an item after saving a bookmark, then press the Options soft key to access the following:  
• Edit bookmark: allows you to edit the address.  
• Delete: allows you to delete the Selected or multiple addresses.  
• Add bookmark: allows you to enter a new bookmark URL.  
• Send URL via message: allows you to send the selected bookmark as a text message.  
77  
   
• Set as homepage: displays the current homepage URL Address. Press the Change soft key or  
to display a bookmarks list.  
Select and save the desired bookmark.  
6. Select a URL and press Go. Your browser displays the site.  
Saved Pages  
This option displays a list of the pages that were saved while navigating the browser.  
History  
This option provides you with a list of the most recently visited web sites. You can use these entries to return to  
previously visited, but not bookmarked, web pages.  
Browser Settings  
Various settings are available when you are using the browser to navigate the web.  
1. In Idle mode, press Menu  
Web  
Browser settings and press the Select soft key or  
.
2. Select one of the following options:  
Clear cache  
You can clear the information stored in the cache, which is the phone’s temporary memory and stores the most  
recently accessed Web pages.  
Press the Yes soft key to confirm the deletion. Otherwise, press the No soft key.  
Cookies  
Cookies identify who you are when you visit favorite web sites; however, they are also used to track your web surfing  
habits.  
Cookie mode  
The Cookie mode allows you to define how your browser handles cookies. Options are: Accept all, Reject all, or  
Prompt before receiving a cookie.  
Delete cookies  
Cookies identify who you are when you visit favorite web sites; however, they are also used to track your web surfing  
habits. Deleting all the cookies provides security.  
1. Highlight Delete cookies and press the Select soft key or  
.
Web  
78  
         
2. At the Delete cookies? prompt press Yes  
.
Preferences  
The Preferences option allows you to set browser preferences such as Run JavaScript, Display images, Play sound,  
and View mode.  
About Browser  
About Browser displays information about the browser such as the type and version.  
79  
 
Section 11: Camera  
This section explains how to use the built-in camera and camcorder on your phone to take photographs and record  
videos.  
Using the Camera  
Using the camera module in your phone, you can take photos of people or events while on the move. Additionally,  
you can send these photos to other people in a Picture Messaging message or set a wallpaper or picture ID image.  
Note: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another person’s privacy.  
Take and Send  
Your camera produces photos in JPEG format.  
Note: When you take a photo in direct sunlight or in bright conditions, shadows may appear on the photo.  
1. In Idle mode, press Menu  
My Downloads  
Photos  
Camera and press  
to access the menu.  
Tip: Press the Camera key on the right side of the phone as a shortcut access to the camera module.  
2. Adjust the image by aiming the camera at the subject.  
3. Press Menu to access the camera options. For details, see “Configuring Camera Options” on page 81.  
Tip: You can use the keypad to quickly change the camera options.  
4. Press the Camera key  
or  
to take the photo.  
5. Press the Options soft key to view the following options:  
Take another: allows you to take another picture.  
Send via: allows you to send this image via Message or to another Bluetooth enabled device.  
Print via Bluetooth: sends this image to a Bluetooth enabled printer.  
Camera  
80  
           
Delete: allows you to delete this image.  
Set as: allows you to set this image as Picture D or Wallpaper.  
Edit: allows you to edit your image attributes such as: Effects, Adjust, Transform, Crop, Insert, Set as, Send via, or Print via  
Bluetooth printer.  
Rotate: rotates the page from landscape to portrait view and vice versa.  
Slide show: displays several images as a slide show.  
Properties: displays basic details about this image.  
6. Press Options  
Send via to send this message as a Message or to a Bluetooth enabled device.  
and select one of the following:  
Recent recipients: allows you to select a number or an address from the last 10 destinations you entered.  
7. If you selected Message in Step 6, press  
Contacts: allows you to enter the phone number you want from your Contacts.  
Groups: allows you to send this image to a group.  
8. Press  
to return to the Idle mode.  
Configuring Camera Options  
1. Before taking a photo, press Menu to access the following:  
Camera/Camcorder: allows you to take a picture or record a video.  
Shooting Mode: takes a photo in various modes. Once you change the mode, the corresponding indicator displays at the top left  
of the display.  
Single: takes a single photo and allows you to view it before returning to the shooting mode.  
Continuous: takes a succession of photos.  
Panorama: takes a landscape photo and places a black mat in front of the photo so it looks like there are four panels in one photo.  
Smile shot: the camera focuses on the foreground or subject and not on the background.  
Mosaic: takes up to four photos and then groups them together into a single final photo.  
Night Mode: allows you to select On or Off.  
Size: allows you to set the image size to either: 1600x1200, 1280x960, 640x480, or 320x240.  
White balance: allows you to set this option from the following choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.  
Exposure meter: allows you to set how the camera measures or meters the light source: Matrix, Center-weighted or Spot.  
Effects: allows you to change the color tone or apply special effects to the photo.  
81  
   
Options include: None, Black and white, Sepia, Negative, or Watercolor.  
Timer: allows you to set a time delay before the camera takes the photo. Select the length of delay you want (Off, 2 seconds, 5  
seconds, or 10 seconds). When you press the Camera key  
or  
key, the camera takes the photo after the specified  
time has elapsed.  
Viewfinder mode: select one of these shooting modes: Full screen view and indicator, Full screen view, or Full  
screen view and guidelines.  
Settings  
:
Photo: allows you to view the Quality of the Photo.  
Setup: a lows you to configure: Review screen, Shutter sound, Default storage, or Shortcuts.  
Camera Shortcuts  
You can change options using your keypad in capture mode. The following shortcuts are available:  
takes the photograph.  
Left and Right navigation keys zoom in and out (landscape mode).  
Up and Down navigation keys adjust the image brightness (landscape mode).  
toggles between camera and video mode.  
changes the shooting mode.  
sets the timer.  
displays the Viewfinder mode.  
Photos  
1. In Idle mode, press Menu  
My Downloads  
Photos and press  
to open the folder.  
When you access this menu, your phone displays the photos in Line view, which shows them as small images.  
Use the Navigation keys to scroll through the photos.  
Camera  
82  
       
2. To view the photos on the full screen, press  
. To go back to Line view, press the Back soft key or  
.
3. Press the Options soft key to use the following options:  
Send via: allows you to send the selected photo as a Message or to a Bluetooth enabled device.  
Set as: allows you to set the photo as Picture D or as Wallpaper.  
Delete: allows you to delete the Selected, Multiple, or All images.  
Move: allows you to move the Selected photo or Multiple photos to another location.  
Copy: allows you to copy the Selected photo or Multiple photos to another location.  
Rename: allows you to rename the photo.  
Take photo: allows you to take another photo.  
Create folder: allows you to create a personal folder in which to place this photo.  
Sort by: allows you to sort photos in this folder by Date, Type, Name, or Size.  
Bluetooth visibility: allows you to enable the Selected or Multiple photos so they are visible to other Bluetooth devices.  
Print via Bluetooth: allows you to send the selected photo to a Bluetooth enabled printer.  
Lock/Unlock: allows you to lock the image to protect it from deletion, or unlock it to allow deletion.  
Properties: allows you to view Basic details about the selected image.  
Deleting a Photo  
You can delete photos one by one or all at one time.  
1. From the Photos menu, highlight the photo you want to delete.  
2. Press Options  
Delete then press the Right Navigation key.  
3. Select Selected  
,
Multiple, or All and press the Select soft key or  
.
4. Press the Yes soft key to confirm the deletion.  
5. Press  
when you are finished.  
Record video  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you provide your subject with sufficient light by  
putting the light source behind you.  
1. In Idle mode, press Menu  
My Downloads  
Videos  
Record video and press the Select soft key or  
.
83  
       
Note: Press  
to switch to Camcorder mode. This is also available in the Camera preview.  
2. Before filming the video, press Menu to access camcorder options (see next page).  
3. Adjust the image by aiming the camera at the subject.  
4. Press  
to begin recording the video.  
5. Press the Stop key to stop the recording and save the video file to your Videos folder.  
6. Once the file saves, press  
to play back your video for review.  
Camcorder Options  
1. Press the Menu soft key to access the camcorder options.  
Camera/Camcorder: allows you to take a picture or record a video.  
Mode: allows you to select Normal or Limit for MMS  
.
Size: allows you to set the video size to: 176x144. The image size displays on the capture screen.  
White balance: allows you to set this option from the following choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.  
Exposure meter: allows you to set how the camcorder measures or meters the light source: Matrix, Center-weighted or Spot.  
Effects: allows you to change the color tone or apply special effects to the photo. Options include: None, Black and white, Sepia,  
Negative, and Watercolor.  
Timer: allows you to set a time delay before the video starts to record. Select the length of delay you want (Off, 2 seconds, 5  
seconds, 10 seconds) and press the Set soft key. When you press  
, the video begins recording after the specified time has  
elapsed.  
Viewfinder mode: select one of these shooting modes: Full screen view and indicator, Full screen view, or Full  
screen view and guidelines.  
Settings  
:
Video: allows you to configure the Quality of the video and adjust the Audio recording.  
Setup: allows you to configure: Review screen, Default storage, or Shortcuts.  
2. Press Back to return to the picture viewer.  
Tip: You can use the keypad to quickly change the camera options using the camera shortcut keys. For more information, refer to  
Camera  
84  
 
Camcorder Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and Volume key in capture mode. The  
following options are available:  
shoots video.  
Left and Right navigation keys zoom in and out (landscape mode).  
Up and Down navigation keys adjust the image brightness (landscape mode).  
switches the handset between camcorder and camera mode.  
changes the recording mode.  
allows you to set a time delay before the camera takes the video.  
displays the Viewfinder mode.  
Videos  
In this menu, you can view a list of videos downloaded from the web server or received in multimedia messages.  
1. In Idle mode, press Menu  
My Downloads  
Videos and press  
to open the file.  
When you access this menu, your phone displays the videos in Line view. Use the Navigation keys to scroll  
through the photos.  
2. Highlight a video clip from your Videos folder, press Options and choose from the following options:  
Send via: sends the video using a Message or to a Bluetooth enabled device.  
Delete: deletes the Selected, Multiple, or All video files.  
Move: allows you to move the Selected or Multiple videos to another location.  
Copy: allows you to copy the Selected or Multiple videos to another location.  
Rename: changes the name of the video.  
85  
       
Create folder: allows you to create a new folder to contain your videos.  
Sort by: allows you to sort and view videos by Date, Type, Name, or Size.  
Bluetooth visibility: allows you to enable the Selected video or Multiple videos so they are visible to other Bluetooth devices.  
Lock/Unlock: allows you to lock the video to protect it from deletion, or unlock it to allow deletion.  
Properties: shows the properties of the video, such as the Name, Format, Resolution, Size, Forwarding, Date created,  
and Location.  
Camera  
86  
Section 12: Bluetooth  
This section describes how to activate Bluetooth and configure it so other Bluetooth devices can see your device by  
name.  
Bluetooth  
About Bluetooth  
Bluetooth is a short-range wireless communications technology capable of exchanging information over a distance of  
about 30 feet without requiring a physical connection.  
Unlike infrared, you do not need to line up the devices to beam information with Bluetooth. If the devices are within a  
range of one another, you can exchange information between them, even if they are located in different rooms.  
In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
.
The following Bluetooth options are available:  
Turn Bluetooth On/Off  
This option allows you to turn Bluetooth on or off.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
.
.
2. Select Turn Bluetooth on/off and press the Select soft key or  
.
My devices  
This option allows you to search for new Bluetooth devices.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
2. Select My devices and press the Select soft key or  
.
3. Highlight the Search new device option and press the Select soft key or  
.
The phone searches for available devices.  
87  
             
My visibility  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This can  
be useful if you are attempting to connect additional Bluetooth devices. Allowing your phone to promote its visibility  
can pose a security risk and incite unauthorized connection. This feature should be paired with a Bluetooth security  
option.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
2. Select My visibility and press the Select soft key or  
.
.
3. Highlight the option (On/Off/Custom) and press the Select soft key or  
.
My phone name  
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name entered into this text field. This  
name can be altered by selecting the pre-existing text and selecting a new text string in its place. This feature should  
be paired with a Bluetooth security option.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
2. Select My phone name and press the Select soft key or  
3. Press to erase the previous name.  
.
.
4. Use the phone’s keypads to enter a new name. The default input entry method is Abc, where the initial  
character is Uppercase and each consecutive character in that same word is left as lowercase text.  
5. Press  
to save the new name.  
Security mode  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its phone name and status. This  
transmission can pose a security risk and incite unauthorized connection to your phone. It is recommended that you  
activate your phone’s Bluetooth security.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
.
2. Select Security mode and press the Select soft key or  
.
3. Highlight On or Off and press the Select soft key or  
.
Bluetooth  
88  
     
Remote SIM mode  
This mode allows you to turn On or Off Remote SIM Mode. Remote SIM mode, when set to On, allows the Bluetooth  
phone car kit to access the contact information stored on the SIM card.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
.
2. Select Remote SIM mode and press the Select soft key or  
.
3. Press On or Off from the Remote SIM mode field.  
Features  
Actually, the Bluetooth specification is a protocol that describes how the short-range wireless technology works,  
whereas individual profiles describe the services supported by individual devices. Profiles reduce the chance that  
different devices integrate.  
1. In Idle mode, press Menu Settings Bluetooth and press the Select soft key or  
.
2. Select Features and press the Select soft key or  
.
The following Service profiles are available:  
Headset: used to make incoming and outgoing calls via Bluetooth headsets.  
Handsfree: used to make incoming and outgoing calls via Bluetooth car kits.  
Bluetooth stereo headset: used to make calls and listen to music via Bluetooth stereo headsets.  
File transfer: used to transfer files to and from Bluetooth devices.  
Object push: used to exchange personal data (namecards, Phonebook contacts, and so on) with Bluetooth devices.  
Basic printing: used to print images, text messages, personal data such as namecards and appointments, and so on, via  
remote Bluetooth printers.  
Serial port: used to connect to other Bluetooth devices via a virtual serial port.  
Dial-up: used to provide Internet access for Bluetooth devices via the phone’s modem.  
SIM access: used to provide access to SIM card via Bluetooth.  
89  
   
Section 13: Changing Your Settings  
This section explains the sound and phone settings for your phone. It includes such settings as: display, security,  
memory, and any extra settings associated with your phone.  
Ringer settings  
You can customize your ringer settings.  
1. In Idle mode, press Menu Settings Ringer settings and press the Select soft key  
or  
.
The following options display:  
• Normal: the phone’s incoming Alert Type is set to melody.  
• Silent: the speaker is muted.  
• Vibration: the phone vibrates but does not play any other sound or melody.  
• Driving: the speaker is activated and launches the currently selected ringtone or melody when the associated notification  
is activated.  
• Outdoor: the speaker is activated, the volume settings are raised to their highest levels, and any currently active ringtones or  
melodies are activated.  
Display settings  
In this menu, you can change various settings for the display or backlight.  
In Idle mode, press Menu Settings Display settings and press the Select soft key or  
.
The following options display:  
Wallpaper  
This menu allows you to change the background image to display in Idle mode.  
1. In Idle mode, press Menu Settings Display settings Wallpaper and  
press  
2. Highlight Images  
3. Highlight a wallpaper from the list and press Select or  
4. Press the Set soft key or to apply the wallpaper.  
.
Wallpapers and press  
.
to apply the wallpaper.  
Changing Your Settings  
90  
             
5. Press Back to return to the Display settings menu.  
Dialing display  
This menu allows you to select the type, size, and color of your dialing font and the background color.  
To change the type of the font:  
1. In Idle mode, press Menu Settings Display settings and press the Select soft key or  
.
.
2. From the Display settings menu, highlight Dialing display and press the Select soft key or  
.
3. Select the Font type option and press the Select soft key or  
.
4. Use the Left or Right Navigation key to select between: Normal 1 or Normal 2 and press Save  
.
To change the size of the font:  
1. In Idle mode, press Menu Settings Display settings and press the Select soft key or  
2. From the Display settings menu, highlight Dialing display and press the Select soft key or  
.
3. Select the Font size option and press the Select soft key or  
.
4. Use the Left or Right Navigation key to select between: Small, Medium, or Large and press Save  
.
To change the color of the font:  
1. In Idle mode, press Menu Settings Display settings and press the Select soft key or  
.
2. From the Display settings menu, highlight Dialing display and press the Select soft key or  
.
3. Highlight the Font color option and press the Select soft key or  
.
4. Use the Left or Right Navigation key to select either Monochrome, Gradation, or Basic (black or white). If you  
select Monochrome or Gradation, select another option by pressing the Down Navigation key then scroll  
through the available choices. Choose from up to 15 different options.  
5. Press Save to save your change. Otherwise, press the Back soft key.  
To change the background color:  
1. In Idle mode, press Menu Settings Display settings and press the Select soft key or  
.
2. From the Display settings menu, highlight Dialing display and press the Select soft key or  
.
91  
           
3. Highlight the Background color option and press the Select soft key or  
4. Use the Left or Right Navigation key to select between 16 different colors.  
5. Press Save to save your change. Otherwise, press the Back soft key.  
.
Brightness  
You can adjust the display brightness to see it better in different lighting conditions.  
1. In Idle mode, press Menu Settings Display settings Brightness and press the Select soft key or  
.
2. Press the Left or Right Navigation keys to adjust the level (from 1-5).  
3. Press Save to save your changes.  
Backlight time  
In this menu, you can select the length of time that the keypad backlight is on and how much longer the display is  
illuminated before going off.  
The On setting is how long the keypad backlight is on.  
1. In Idle mode, press Menu Settings Display settings Backlight time and press the Select soft key or  
.
2. Highlight the On field and press  
The Dim option is how much longer after the keypad backlight goes off that the display remains lit.  
1. Highlight the Dim field and press to edit the time. Selections are Off 5 seconds 15 seconds, or 30  
seconds  
to edit the time. Selections are 5 seconds, 15 seconds, or 30 seconds.  
,
,
.
2. Press OK to save your changes, or Back to cancel.  
Keypad light  
In this menu you can configure the keypad light to turn on and off at any time. The default “Use at any time” allows  
you to use the keypad light any time day or night. When you select the “Use at custom time” option you can set the  
time the keypad light is on.  
Changing Your Settings  
92  
       
1. In Idle mode, press Menu Settings Display settings Keypad light and press the Select soft key or  
.
2. Highlight the Set time field and press the Right Navigation key to select Use at custom time  
.
3. Highlight the After time field and enter the time you want the keypad to come on. (example, after 5:00pm)  
4. Highlight the Until time field and enter the time you want the keypad to shut off.  
5. Press Save to save your selections. or press Back to cancel.  
Time and date  
This menu allows you to change the current time and date displayed.  
1. In Idle mode, press Menu Settings Time and date and press  
.
2. The following options are available:  
• Time zone updating: allows you to receive time information from your service provider’s network.  
Automatic: the phone automatically updates the time and date according to the current time zone using the network service.  
Manual only: you need to manually set the time and date according to the current time zone using the Set time menu.  
Prompt first: the phone asks for a confirmation before the update.  
• Time zone: displays a selectable list of 30 different time zones and allows you to select Daylight saving. Displays only if Manual only  
or Prompt first is selected.  
• Time: allows you to change the hour, minute and AM/PM.  
• Date: allows you to enter the month, day, and year.  
• Time format: allows you to select whether your time displays in either a 12 hour or 24 hour format.  
To change your time and date settings:  
1. Highlight the Time zone updating field and use the Left or Right Navigation key to select Manual only or Prompt  
first  
.
Important!: The Manual only or Prompt first option must be selected to activate the Time zone  
,
Time, Date, and Time format.  
2. Use the Up or Down Navigation key to select the option you want to change: Time zone  
,
Time, Date, or Time  
format  
.
93  
     
• Time zone: Highlight the option and press  
. Use the Left or Right Navigation key to select a time zone. Press  
Yes to save your changes or No to cancel.  
• Time: Highlight the option and edit the text field to enter the required time. For more information, refer to “Using  
• Date: Highlight the option and edit the text field to enter the required date. For more information, refer to “Using  
• Time format: Highlight the option and use the Left or Right Navigation key to select a time format.  
3. Press Save to save your changes or Back to cancel.  
Note: Automatic updates of time and date do not change the time set for alarm settings or calendar memos.  
Phone settings  
You can customize various phone settings.  
In Idle mode, press Menu Settings Phone settings and press the Select soft key or  
.
The following options display:  
Airplane mode  
Airplane Mode allows you to use many of your phone’s features, such as Games and Voice Notes, when you are in an  
airplane or in any other area where making or receiving calls or data is prohibited. When your phone is in Airplane  
Mode, it cannot send or receive any calls or access online information.  
Highlight On or Off and press Save.  
Keypad auto-lock  
1. In Idle mode, press Menu Settings Phone settings Keypad auto-lock and press the Select soft key  
or  
.
2. Press Off or On and press the Save soft key.  
USB mode  
This menu selects the method of communication for the USB port.  
Changing Your Settings  
94  
             
Important!: Note: The Bluetooth feature must first be disabled before initiating a USB connection with the phone. Prior to connecting the  
USB cable to the phone, install the latest version of the PC Studio application. This application installs the necessary USB  
drivers onto your machine.  
1. In Idle mode, press Menu Settings Phone settings  
USB mode and press the Select soft key or  
.
2. Select one of the following USB modes:  
• Samsung PC studio: sets PC Studio to launch as the default application when a USB connection is detected.  
• Ask on connection: requires the phone to display a message which requires you to assign a default USB application.  
• Mass storage: allows you to utilize the onboard storage capacity of the phone to store and upload files. This option allows your  
computer to detect the phone as a removable storage drive.  
Security  
Lock phone  
When the Lock phone feature is enabled, the phone is locked and you must enter the 4- to 8-digit phone password  
each time the phone is switched on.  
Once the correct password is entered, you can use the phone until you switch it off.  
In Idle mode, press Menu Settings Phone settings  
or  
The following options are available:  
Security  
Lock phone and press the Select soft key  
.
Disable: you are not asked to enter the phone password when you switch on the phone.  
Enable: you are required to enter the phone password when you switch on the phone.  
Lock SIM  
When the Lock SIM feature is enabled, the phone will only work with the current S M card. This is done by selecting On or Off in  
the Lock SIM menu.  
Check PIN code  
When the Check PIN code feature is enabled, you must enter your PIN each time you switch on the phone.  
Consequently, any person who does not have your PIN cannot use your phone without your approval.  
Note: Before enabling or disabling the PIN Check feature, you must enter your PIN.  
95  
       
The following options are available:  
Disable: the phone connects directly to the network when you switch it on.  
Enable: you must enter the P N each time the phone is switched on.  
Lock applications  
Using this menu, you can lock your media contents, such as messages, images, and sounds. Once you lock the  
contents, you must enter the phone’s password to access the associated menus.  
1. In Idle mode, press Menu Settings Phone settings  
soft key or  
Security  
Lock applications and press the Select  
.
2. Highlight the check box next to each application you want to lock, or highlight All to select all applications.  
3. Press the Save soft key.  
Fixed dialing mode  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict your outgoing calls to a limited  
set of phone numbers.  
1. In Idle mode, press Menu Settings Phone settings  
Security  
Fixed dialing mode and press the  
Select soft key or  
.
2. Select On or Off.  
3. Press the Save soft key.  
Change phone password  
The Change password feature allows you to change your current phone password to a new one. You must enter the  
current password before you can specify a new one.  
Once you enter a new password, you are asked to confirm the change by entering the password again.  
1. In Idle mode, press Menu Settings Phone settings  
Select soft key or  
2. Enter your current password and then enter the new password twice.  
Security  
Change phone password and press the  
.
Note: If you change your password, be sure to record it and keep it in a safe place. If you forget your password, contact your Service  
Provider for assistance.  
Changing Your Settings  
96  
     
Change PIN code  
This feature allows you to change your current PIN, provided that the Check PIN code feature is enabled. You must  
enter the current PIN before you can specify a new one.  
Once you enter a new PIN, you are asked to confirm the PIN number by re-entering it.  
Change PIN2 code  
The Change PIN2 feature allows you to change your current PIN2 to a new one. You must first enter the current PIN2  
(obtained from your service provider) before you can specify a new one. Once you enter a new PIN2, you are asked to  
re-enter the new PIN2 to as confirmation.  
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM card does not have the PIN2 feature.  
Bluetooth  
For an explanation of the options available on the Bluetooth menu, see “Bluetooth” on page 87.  
Call settings  
To access the Call settings menu:  
1. In Idle mode, press Menu Settings Phone settings  
key or  
2. Select one of the following options:  
Security  
Call settings and press the Select soft  
.
• Answering mode: selects how your phone answers incoming calls. Selections are: Send key, Any key, or Automatic.  
• Auto redial: automatically redials the last number if the call was either cut off or you were unable to connect.  
• Show my number: allows you to select how your D is handled when an outgoing call is initiated.  
• Call forwarding: incoming calls are re-routed to a secondary number that you specify.  
Call barring: allows you to restrict specific types of incoming and outgoing calls on your phone.  
• Call waiting: this network service informs you when someone is trying to reach you during another call. You can specify individual  
call waiting options for voice calls.  
• Call status tones: allows you to activate the phone to alert you when the call connects with a Call connect tone, Minute minder, or  
call end tone.  
• Alerts on call: activates an alert tone for new messages being received during an active call.  
• Auto reply: sets up an automatic text reply for incoming calls.  
97  
           
• Call history management: allows you to manage your call history.  
Answering mode  
The Answer Options menu allows you to select how your phone answers incoming calls.  
1. In Idle mode, press Menu Settings Call settings Answering mode and press the Select soft key  
or  
.
2. Press  
key to save your selection. Options include:  
• Send key: answers an incoming call by pressing either the Accept soft key or the  
key.  
• Any key: answers an incoming call by pressing any key on your phone.  
Auto redial  
In this menu, you can automatically redial the last number if the call was either cut off or you were unable to connect.  
1. In Idle mode, press Menu Settings Call settings Auto redial and press the Select soft key  
or  
.
2. Press the Up or Down Navigation key to make your selection then press the Save soft key to save your new  
selection. Options include:  
• Off: keeps the phone from automatically redialing the last number if the call was disconnected or the call was cut off.  
• On: causes the phone to automatically redial the number.  
Show my number  
In the Show my number menu you can select how your ID is handled when an outgoing call is initiated.  
1. In Idle mode, press Menu Settings Call settings  
or  
2. Highlight your selection and press  
Show my number and press the Select soft key  
.
to make your selection.  
3. Press Save to save your new selection. Options include:  
• Set by network: uses the default network information to identify you to the other party.  
• Show number: displays your identifying information to the other recipient.  
• Hide number: hides your identifying information from the other recipient.  
Changing Your Settings  
98  
     
Call forwarding  
This network service enables incoming calls to re-route to a secondary number that you specify.  
Example: You may want to forward your business calls to a colleague while you are on holiday.  
To set your call forwarding options:  
1. In Idle mode, press Menu Settings Call settings  
or  
Call forwarding and press the Select soft key  
.
2. Select a call forwarding option then press the Select soft key or  
.
The following options are available:  
• Always: all calls are forwarded until this feature is cancelled.  
• If busy: calls are forwarded when you are already on another call.  
• If no reply: calls are forwarded when you do not answer the phone.  
• If out of reach: calls are forwarded when you are not in an area covered by your service provider or when your phone is  
switched off.  
• Cancel all: all call forwarding options are canceled.  
3. Enter the number in which to forward the calls in the Forward to text box and press the Select soft key  
or  
.
Tip: To enter an international code, press and hold the  
key until the + sign displays.  
4. Select Options Activate Deactivate, or Check status then press the Select soft key or  
,
.
The current status displays. If the option was already set, the number to which the calls are forwarded displays.  
5. When you select If No reply in step 2, select (from the Waiting time field) the length of time the network waits for  
before forwarding a call.  
The phone sends your settings to the network and the network’s acknowledgement displays.  
99  
   
Call barring (SIM Card Dependent)  
Call Barring allows you to restrict specific types of incoming and outgoing calls on your phone. This is useful if you  
allow someone to use your phone for a short period of time.  
Call waiting  
This network service informs you when someone is trying to reach you during another call.  
To set your call waiting options:  
1. In Idle mode, press Menu Settings Call settings  
or  
2. Select Options  
The current status displays. If the option was already set, the number to which the calls are forwarded displays.  
Call waiting and press the Select soft key  
.
Activate  
,
Deactivate, or Check status then press the Select soft key or  
.
Call status tones  
This option allows you to activate the phone to alert you when the call connects with a Call connect tone, Minute  
minder, or Call end tone.  
1. In Idle mode, press Menu Settings Call settings  
or  
Call status tones and press the Select soft key  
.
2. Highlight Call connect tone  
,
Minute minder, or Call end tone and press  
to insert a check mark beside your  
selection.  
3. Press Options  
Save to save your selection.  
Alerts on call  
This menu determines whether you are alerted with a sound during a call.  
1. In Idle mode, press Menu Settings Call settings Alerts on call and press the Select soft key  
or  
2. Highlight Off or On and press Save  
.
.
Auto reply  
This feature sets up an automatic text reply for incoming calls.  
Changing Your Settings  
100  
         
1. In Idle mode, press Menu Settings Call settings  
Auto reply and press the Select soft key or  
.
2. Highlight the Activation field and press the Right Navigation key to turn the Activation On  
.
3. Press the Down Navigation key and enter a reply message in the Reply to send field.  
4. Press Options  
Save to save your selection.  
Call history management  
Call time  
This menu lets you view the time log for calls both made and received.  
Note: The actual time invoiced by your service provider may differ from times displayed on your phone due to network features and service  
plan.  
The following time logs are available:  
• Last call time: shows the length of your last call.  
Total incoming: shows the total length of all calls you have received since the timer was last reset.  
• Total outgoing: shows the total length of all calls you have made since the timer was last reset.  
• Life time: shows the total length of time for both incoming and outgoing calls. You cannot clear this information.  
Delete all history  
This menu allows you to delete the records in each call record separately, or you can delete all of your call records at  
one time.  
1. In Idle mode, press Menu Settings Call settings Call history management  
press the Select soft key or  
2. Select one of the following call logs and press  
Delete all history and  
.
to place a check mark next to the item to delete.  
All calls  
Missed calls  
Dialed calls  
Answered calls  
3. Press Delete  
4. At the Delete? prompt, press Yes to delete the selected category, or No to cancel.  
101  
.
 
Application settings  
The Application Settings feature allows you to configure the functional parameters for most of the on-board  
applications. These applications are described in more detail within other sections of this manual.  
Messaging  
Music player  
Calendar  
Manage Contacts  
Messaging key  
This menu allows you to customize the Messaging key by assigning your favorite messaging application to the key.  
You can modify this setting any time.  
1. In Idle mode, press Menu Settings Messaging key and press the Select soft key or  
2. If this is the first time you are programming this key, read the information that displays and press OK  
3. Select the application (Create message, Inbox, Email, or IM) to assign to the messaging key and press Assign  
When pressed, the messaging key shortcuts to this application.  
Memory settings  
.
.
.
Clear phone memory  
From this menu you can clear the memory for Media, Messaging, Contacts, Calendar, Tasks, Memo, Exchange  
email, or Voicemail. You can all select All to clear everything listed.  
1. In Idle mode, press Menu Settings Memory settings  
key or  
Clear phone memory and press the Select soft  
.
2. Highlight one of the applications to clear, or highlight All to clear all the memory settings and press  
.
A checkmark displays next to each application to clear.  
3. Press OK to clear the application.  
4. Enter your password in the Password field and press Confirm  
.
5. At the Clear? prompt, press Yes to confirm your action or No to cancel.  
Changing Your Settings  
102  
           
Memory Card Settings  
From this menu you can view details about the memory card, format the memory card, rename the memory card, or  
turn Bluetooth visibility on or off.  
1. In Idle mode, press Menu Settings Memory settings  
key or  
2. Select one of the following options and press  
• Memory card details displays information about the memory card such as Name, Maximum size and Available memory.  
• Format memory card allows you to reformat the memory card.  
• Rename memory card  
• Bluetooth visibility on  
Memory status  
Memory card settings and press the Select soft  
.
.
:
:
:
allows you to rename the memory card.  
:
allows you to turn the Bluetooth visibility On or Off.  
You can check the amount of the memory used and memory remaining for Shared memory, Messaging, My  
Downloads, Calendar, Tasks, Memo, and Contacts.  
1. In Idle mode, press Menu Settings Memory settings  
Memory status and press the Select soft key or  
.
2. Highlight a category for which you want to view the memory status and press Select  
.
The status for that category displays.  
Language  
This menu allows you to select a display language for Text language and Input mode. Choose from Automatic,  
English, and Français.  
1. In Idle mode, press Menu Settings Language and press  
2. Highlight the Screen text field and press  
3. Select one of the following options and press OK  
.
.
.
Automatic  
English  
Français  
4. Highlight the Input language field and press  
103  
.
         
5. Select one of the following options and press OK  
.
English  
Français  
6. Press Save to confirm your selections.  
Network selection  
The Network selection feature enables you to automatically or manually select the network used when roaming  
outside of your home area.  
Note: You can select a network other than your home network only if there is a valid roaming agreement between the two.  
To change the Network Selection mode:  
1. In Idle mode, press Menu Settings Network selection and press the Select soft key or  
2. Select Search now and press the Select soft key or  
.
.
3. Highlight the network to which you want to connect and press the Select soft key or  
.
The phone scans for that network and, if available, you are connected.  
To change your Default setup:  
1. Highlight the Default setup option and press the Select soft key or  
2. Highlight one of the following options and press the Select soft key or  
• Automatic: you are connected to the first available network when roaming.  
.
.
• Manual: the phone begins searching for available networks. Press the Up or Down Navigation key until the network you want  
highlights and then press the Select soft key or the key.  
The phone scans the selected network and attempts to connect. If a connection is available, you are connected.  
Reset settings  
From this menu you can reset your phone and sound settings to the default settings.  
The following options are available:  
All: Phone, Display, and Sound settings are returned to default values.  
Phone settings: only phone settings are returned to default values.  
Display settings: only display settings are returned to default values.  
Changing Your Settings  
104  
         
Sound settings: only sound settings are returned to default values.  
To reset your settings:  
1. In Idle mode, press Menu Settings Reset settings and press the Select soft key  
or  
2. Highlight one of the options or highlight All and press  
3. Press Reset enter your password and press Confirm  
.
to place a check mark next to the option.  
.
4. At the Reset settings? prompt, select Yes to confirm or No to cancel.  
Software update  
The Software Update feature enables you to use your phone to connect to the network and upload any new phone  
software directly to your phone.  
1. In Idle mode, press Menu Settings Software update and press the Select soft key  
or  
.
2. Press  
key to continue the update process and follow the on screen instructions.  
105  
   
Section 14: Health and Safety Information  
Getting the Most Out of Your Reception  
Keeping Tabs on Signal Strength  
The quality of each call you make or receive depends on the signal strength in your area. Your phone informs you of  
the current signal strength by displaying a number of bars next to the signal strength icon. The more bars displayed,  
the stronger the signal. If you’re inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power Save feature is automatically activated.  
If your phone is active, it periodically rechecks service availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, No Service and an Antenna icon display on the screen. When a signal is  
found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it’s turned on, it receives and transmits radio frequency  
(RF) signals. When you use your phone, the system handling your call controls the power level. This power can range  
from 0.006 watts to 0.2 watts in digital mode.  
Knowing Radio Frequency Safety  
The design of your phone complies with updated NCRP standards described below. In 1991-92, the Institute of  
Electrical and Electronics Engineers (IEEE) and the American National Standards Institute (ANSI) joined in updating  
ANSI’s 1982 standard for safety levels with respect to human exposure to RF signals. More than 120 scientists,  
engineers and physicians from universities, government health agencies and industries developed this updated  
standard after reviewing the available body of research. In 1993, the Federal Communications Commission (FCC)  
adopted this updated standard in a regulation. In August 1996, the FCC adopted hybrid standard consisting of the  
existing ANSI/IEEE standard and the guidelines published by the National Council of Radiation Protection and  
Measurements (NCRP).  
Maintaining Your Phone’s Peak Performance  
There are several simple guidelines for operating your phone properly and maintaining safe, satisfactory service.  
Speak directly into the mouthpiece.  
Health and Safety Information  
106  
     
Avoid exposing your phone and accessories to rain or liquid spills. If your phone does get wet, immediately turn the power off  
and remove the battery. If it’s inoperable, return it to a dealer store or call Customer Support for service.  
Note: For the best care of your phone, only authorized personnel should service your phone and accessories. Faulty service may void the  
warranty.  
Maintaining Safe Use of and Access to Your Phone  
Failure to follow the instructions outlined may lead to serious personal injury and possible property damage.  
Using Your Phone While Driving  
Talking on your phone while driving (or operating the phone without a hands-free device) is prohibited in some  
jurisdictions. Laws vary as to specific restrictions. Remember that safety always comes first.  
When using your phone in the car:  
Get to know your phone and its features, such as speed dial and re-dial.  
When available, use a hands-free device.  
Position your phone within easy reach.  
Let the person you are speaking to know you are driving; if necessary, suspend the call in heavy traffic or hazardous weather  
conditions.  
Do not take notes or look up phone numbers while driving.  
Dial sensibly and assess the traffic; if possible, place calls when stationary or before pulling into traffic.  
Do not engage in stressful or emotional conversations that may divert your attention from the road.  
Dial 911 to report serious emergencies. t’s free from your wireless phone.  
Use your phone to help others in emergencies.  
Call roadside assistance or a special non-emergency wireless number when necessary.  
Following Safety Guidelines  
To operate your phone safely and efficiently, always follow any special regulations in a given area. Turn your phone off  
in areas where use is forbidden or when it may cause interference or danger.  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals. However, RF signals from wireless  
phones may affect inadequately shielded electronic equipment.  
107  
 
RF signals may affect improperly installed or inadequately shielded electronic operating systems and/or entertainment  
systems in motor vehicles. Check with the manufacturer or their representative to determine if these systems are  
adequately shielded from external RF signals. Also check with the manufacturer regarding any equipment that has  
been added to your vehicle.  
Consult the manufacturer of any personal medical devices, such as pacemakers and hearing aids, to determine if they  
are adequately shielded from external RF signals.  
Note: Always turn off the phone in health care facilities and request permission before using the phone near medical equipment.  
Turning Off Your Phone Before Flying  
Turn off your phone before boarding any aircraft. To prevent possible interference with aircraft systems, the U.S.  
Federal Aviation Administration (FAA) regulations require you to have permission from a crew member to use your  
phone while the plane is on the ground. To prevent any risk of interference, FCC regulations prohibit using your phone  
while the plane is in the air.  
Turning Off Your Phone in Dangerous Areas  
To avoid interfering with blasting operations, turn off your phone when in a blasting area or in other areas with signs  
indicating that two-way radios should be turned off. Construction crews often use remote-control RF devices to set off  
explosives.  
Turn off your phone when you are in an area with a potentially explosive atmosphere. Although it is rare, your phone or its  
accessories could generate sparks. Sparks could cause an explosion or a fire resulting in bodily injury or even death.  
These areas are often, but not always, clearly marked. These areas include:  
Fueling areas such as gas stations.  
Below deck on boats.  
Fuel or chemical transfer or storage facilities.  
Areas where the air contains chemicals or particles such as grain, dust or metal powders.  
Any other area where you would normally be advised to turn off your vehicle’s engine.  
Note: Never transport or store flammable gas, liquid or explosives in the compartment of your vehicle that contains your phone or  
accessories.  
Health and Safety Information  
108  
Restricting Children’s Access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they could hurt themselves and others,  
damage the phone, dial 911 by mistake or make calls that increase your phone bill.  
Warning Regarding Display  
The display on your handset is made of glass or acrylic and could break if your handset is dropped or if it receives  
significant impact. Do not use if screen is broken or cracked as this could cause injury to you.  
Caring for the Battery  
Protecting Your Battery  
The guidelines listed below help you get the most out of your battery’s performance.  
Use only Samsung approved batteries and desktop chargers. These chargers are designed to maximize battery life. Using  
other batteries or chargers voids your warranty and may cause damage.  
In order to avoid damage, charge the battery only in temperatures that range from 32º F to 113º F (0º C to 45º C).  
Don’t use the battery charger in direct sunlight or in high humidity areas, such as the bathroom.  
Never dispose of the battery by incineration.  
Keep the metal contacts on top of the battery clean.  
Don’t attempt to disassemble or short-circuit the battery.  
The battery may need recharging if it has not been used for a long period of time.  
It’s best to replace the battery when it no longer provides acceptable performance. When used correctly, the battery can be  
recharged hundreds of times before it needs replacing.  
Don’t store the battery in high temperature areas for long periods of time. t’s best to follow these storage rules:  
Less than one month:  
-4º F to 140º F (-20º C to 60º C)  
More than one month:  
-4º F to 113º F (-20º C to 45º C)  
Disposal of Lithium Ion (LiIon) Batteries  
For safe disposal options of your LiIon batteries, contact your nearest service center.  
Special Note: Be sure to dispose of your battery properly. In some areas, the disposal of batteries in household or  
business trash may be prohibited.  
109  
 
Note: For safety, do not handle a damaged or leaking LiIon battery.  
Acknowledging Special Precautions and Industry Canada Notice  
Cautions  
Any changes or modifications to your phone not expressly approved in this document could void your warranty for this  
equipment, and void your authority to operate this equipment. Only use approved batteries, antennas and chargers.  
The use of any unauthorized accessories may be dangerous and void the phone warranty if said accessories cause  
damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be broken. Avoid dropping, hitting,  
bending or sitting on it.  
Information to User  
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of  
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation; if this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged  
to try to correct the interference by one or more of the following measures:  
Reorient / relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Specific Absorption Rates (SAR) for Wireless Phones  
The SAR is a value that corresponds to the relative amount of RF energy absorbed in the head of a user of a wireless  
handset.  
The SAR value of a phone is the result of an extensive testing, measuring and calculation process. It does not  
represent how much RF the phone emits. All phone models are tested at their highest value in strict laboratory  
settings. But when in operation, the SAR of a phone can be substantially less than the level reported to the FCC. This  
is because of a variety of factors including its proximity to a base station antenna, phone design and other factors.  
Health and Safety Information  
110  
     
What is important to remember is that each phone meets strict federal guidelines. Variations in SARs do not represent a  
variation in safety.  
All phones must meet the federal standard, which incorporates a substantial margin of safety. As stated above,  
variations in SAR values between different model phones do not mean variations in safety. SAR values at or below the  
federal standard of 1.6 W/kg are considered safe for use by the public.  
The highest reported SAR values of the T479B are:  
GSM 850: Head: 0.54 W/Kg; Body-worn: 1.11 W/Kg  
GSM 1900: Head: 0.40 W/Kg; Body-worn: 0.57 W/Kg  
UMTS V: Head: 0.42 W/Kg; Body-worn: 0.56 W/Kg  
UMTS II: Head: 1.03 W/Kg; Body-worn: 0.73 W/Kg  
Owner’s Record  
The model number, regulatory number and serial number are located on a nameplate inside the battery compartment.  
Record the serial number in the space provided below. This will be helpful if you need to contact us about your phone in  
the future.  
Model: SGH-T479B  
Serial No.:  
111  
 
Section 15: Warranty Information  
Standard Limited Warranty  
What is Covered and For How Long?  
SAMSUNG Electronics Canada Inc. ("SAMSUNG") warrants to the original purchaser ("Purchaser") that  
SAMSUNG's phones and accessories ("Products") are free from defects in material and workmanship  
under normal use and service for the period commencing upon the date of purchase and continuing for the  
following specified period of time after that date:  
Phone  
1 Year  
Batteries  
1 Year  
Leather Case  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of Product by Purchaser. This  
Limited Warranty does not cover: (a) defects or damage resulting from accident, misuse, abuse, neglect,  
unusual physical, electrical or electromechanical stress, or modification of any part of Product, including  
antenna, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) any  
plastic surfaces or other externally exposed parts that are scratched or damaged due to normal use; (d)  
malfunctions resulting from the use of Product in conjunction with accessories, products, or ancillary/  
peripheral equipment not furnished or approved by SAMSUNG; (e) defects or damage from improper  
testing, operation, maintenance, installation, or adjustment; (f) installation, maintenance, and service of  
Product; or (g) Product used or purchased outside Canada.  
This Limited Warranty covers batteries only if battery capacity falls below 80% of rated capacity or the  
battery leaks, and this Limited Warranty does not cover any battery if: (i) the battery has been charged by  
a battery charger not specified or approved by SAMSUNG for charging the battery; (ii) any of the seals on  
the battery are broken or show evidence of tampering; or (iii) the battery has been used in equipment other  
than the SAMSUNG phone for which it is specified.  
Warranty Information  
112  
     
What are SAMSUNG's Obligations? During the applicable warranty period, SAMSUNG will repair or  
replace, at SAMSUNG's sole option, without charge to Purchaser, any defective component part of Product.  
To obtain service under this Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales receipt or comparable  
substitute proof of sale showing the date of purchase, the serial number of Product and the sellers' name and  
address. To obtain assistance on where to deliver the Product, call Samsung Customer Care at 1-800-  
Samsung. Upon receipt, SAMSUNG will promptly repair or replace the defective Product. SAMSUNG may,  
at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts or components when repairing any  
Product or replace Product with a rebuilt, reconditioned or new Product. Repaired/replaced leather cases,  
pouches and holsters will be warranted for a period of ninety (90) days. All other repaired/replaced Product  
will be warranted for a period equal to the remainder of the original Limited Warranty on the original  
Product or for 90 days, whichever is longer. All replaced parts, components, boards and equipment shall  
become the property of SAMSUNG. If SAMSUNG determines that any Product is not covered by this  
Limited Warranty, Purchaser must pay all parts, shipping, and labor charges for the repair or return of such  
Product.  
What Are the Limits On SAMSUNG's Liability? EXCEPT AS SET FORTH IN THE EXPRESS  
WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND  
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,  
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH  
RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:  
·
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
·
·
·
·
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
113  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO CREATE  
AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT.  
ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF LAW,  
INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF MERCHANTABILITY AND  
FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF  
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN. SOME JURISDICTIONS DO  
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE  
LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE  
FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF,  
OR INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE  
USE OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS  
WARRANTY, INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES,  
OR LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY  
TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED BY  
SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR ANY  
CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME JURISDICTIONS DO  
NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL  
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER  
RIGHTS, WHICH VARY FROM PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL  
NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT  
AND SHALL BE PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED  
WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH  
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY  
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES  
IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS.  
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-PARTY SOFTWARE OR  
EQUIPMENT IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES  
OR REPRESENTATIONS AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,  
STATUTORY OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,  
Warranty Information  
114  
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,  
WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO  
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-  
PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT  
VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE  
CASE MAY BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and SAMSUNG, and  
SAMSUNG's Product pricing reflects this allocation of risk and the limitations of liability contained in this  
Limited Warranty. The agents, employees, distributors, and dealers of SAMSUNG are not authorized to  
make modifications to this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation, whether oral or written, do not  
constitute warranties by SAMSUNG and should not be relied upon.  
Samsung Electronics Canada, Inc.  
©2010 Samsung Electronics Canada, Inc. SAMSUNG is a registered trademark of Samsung Electronics  
Co , Ltd. and its related entities.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
#861826 v2 | 4032342  
115  
Index  
home 75  
A
menu options 76  
navigating 75  
preferences 79  
saved pages 78  
settings 78  
C
ABC mode 29, 76  
using 31  
Airplane Mode 94  
Alarms 64  
B
Backlight 15  
Calculator 71  
Calendar 62  
settings 92  
Battery  
Call  
charging 5  
low indicator 6  
removing 2  
adjusting call volume 18  
answering a call 18  
call log 19  
call waiting 24  
correcting the number 17  
ending a call 17  
replacing 3  
Bluetooth 87  
about 87  
features 89  
international call 17  
making a call 17  
making call from contacts 18  
multi-party call 25  
place call on hold 23  
redialing last number 17  
phone name 88  
remote SIM mode 89  
searching for new devices 87  
security mode 88  
turn on/off 87  
visibility 88  
Call Record  
Browser  
all calls 19  
bookmarks 77  
clear cache 78  
cookies 78  
enter URL 77  
entering text 76  
exiting 75  
answered calls 21  
delete all records 21  
dialed calls 20  
missed calls 19  
Caller Group  
adding 36  
history 78  
116  
 
editing 36  
Camcorder  
font type 91  
Display 13  
options 84  
record video 83  
shortcuts 85  
backlight 15  
icons 14  
E
Camera 80  
Email 61  
Entering Text 28  
changing Text Entry Mode 29  
accessing photos 82  
deleting photos 83  
options 81  
shortcuts 82  
take and send photos 80  
taking photos 80  
using symbol mode 33  
F
Functions and Options 22  
G
Charging battery 5  
Contacts 34  
adding new caller group 36  
Games and Apps 60  
Getting Started 1  
activating your phone 1  
removing the battery 2  
removing the cover 1  
replacing the battery 3  
replacing the vover 5  
voicemail 7  
copy all 39  
delete all 39  
dialing a number 36  
editing caller group 36  
finding a contacts entry 34  
managing 38  
save contacts 38  
searching for a number 24  
speed dial 37  
storing a number 34  
using Mobile Address Book 34  
view contacts 38  
H
Health and Safety Information 106  
I
Icons  
description 14  
Images 58  
Inbox  
Converter 73  
viewing a picture message from 47  
viewing a text message from 46  
In-call options  
D
Dialing Display 91  
background color 91  
font color 91  
font size 91  
making a second call 23  
search for another number 24  
117  
using the speakerphone 24  
Instant Messaging (IM) 48, 61  
International Call 17  
L
text message center 54  
text messages 42  
types of messages 41  
viewing message from inbox 46  
Missed Call  
Low battery indicator 6  
viewing 19  
Missed Messages Tab 14, 41  
Multi-Party Call 25  
private conversation 25  
setting up 25  
Music 57  
M
Memo 71  
Memory Card  
installing 4  
removing 4  
Memory Status 40, 61  
My Downloads 57  
email 61  
Menu  
navigation 26  
scrolling 26  
shortcuts 27  
games and apps 60  
get new wallpapers 58  
images 58  
instant messaging 61  
music 57  
Messages  
broadcast message 55  
creating a text message 42  
delete by folder 55  
drafts 50  
icons 41  
inbox 45  
instant messages (IM) 48  
memory status 56  
missed messages tab 41  
my folders 52  
photos 57, 82  
Sounds 59  
videos 60  
My Folders  
creating a new folder 52  
using 52  
My Profile 38  
N
Numeric mode 30, 76  
using 33  
organizing with my folders 52  
outbox 49  
O
picture messages 43  
push message 55  
settings 53  
short message service (SMS) 42  
templates 52  
Organizer  
Calculator 71  
Stopwatch 74  
Timer 73  
118  
Other Files 61  
S
P
Security  
Phone  
change phone password 96  
change PIN code 97  
change PIN2 code 97  
check PIN code 95  
fixed dialing mode 96  
lock applications 96  
lock phone 95  
backlight 15  
camera view 11  
display screen 13  
features 8  
front view 9  
icons 14  
keys 9  
lock SIM 95  
muting the microphone 23  
my number 40  
QWERTY keyboard 11, 28  
side views 12  
Service Dialing Numbers 40  
Settings 90  
airplane mode 94  
alerts on call 100  
answering mode 98  
applications 102  
auto redial 98  
switching on/off 6  
Photos 57, 82  
deleting photos 83  
Picture message  
auto reply 100  
auto resize image 54  
creating 43  
creation mode 55  
default style 55  
outbox 49  
receiving options 54  
sending a template 53  
sending options 54  
viewing from inbox 47  
Q
backlight 92  
Bluetooth 87, 97  
call 97  
call barring 100  
call forwarding 99  
call history management 101  
call status tones 100  
call waiting 100  
dialing 91  
display 90  
display brightness 92  
keypad auto-lock 94  
keypad light 92  
QWERTY keyboard 11, 28  
R
Record Video 83  
language 103  
memory 102  
119  
memory card 103  
memory status 103  
messaging 102  
network selection 104  
Phone 94  
Task List 70  
Text  
ABC Mode 31  
ABC mode 29, 76  
key definitions and functions 31  
Numeric mode 76  
phone 94  
reset settings 104  
ringer 90  
numeric mode 30  
Symbol mode 76  
security 95  
symbol mode 30  
show my number 98  
software update 105  
text message 53  
Time and Date 93  
time and date 93  
USB mode 94  
T9 mode 30, 76  
using numeric mode 33  
using T9 Mode 32  
Text input mode  
changing 29  
Timer 73  
wallpaper 90  
Tip Calculator 72  
Shortcuts 27  
SIM card  
installing 2  
Soft Keys 22  
options during call 23  
selecting options 22  
Sounds 59  
Speakerphone 70  
using 24  
Speed Dial 37  
U
Understanding Your Phone 8  
V
Vibration Profile 21  
Video 60, 85  
record 83  
Visual Voicemail 48  
Voice List 59  
Voice Recognition 65  
adaptation 69  
setting up entries 37  
audio modes 70  
checking phone status 68  
name dial 67  
name lookup 67  
open applications 68  
Say a Command options 66  
send text message 67  
Stopwatch 74  
Symbol mode 30, 76  
using 33  
T
T9 mode 30, 76  
using 32  
120  
settings 69  
speakerphone 70  
Voicemail 7, 55  
accessing 48  
W
Wall charger 5  
Wallpaper 26, 58  
Warranty Information 112  
Web  
browser 75  
World Clock 72  
121  

Teac HD2U 100 User Manual
Tascam CD VT1 User Manual
Spectra Logic T680 User Manual
Sony Xperia ZL 1270 6441 User Manual
Sony FD TRINITRON VEGA KV 36FS16 User Manual
Seagate LYON SERIES IDE ST760211DE User Manual
Philips SBCAC250 User Manual
Philips HD7830 User Manual
Pantech C630 User Manual
Oregon Scientific BAR888RA User Manual