Headquarters
Samsung Electronics Co., Ltd
416, Maetan-3Dong, Yeongtong-Gu, Suwon City,
Gyeonggi-Do Korea 443-742
82-(0)31-200-3793
SAMSUNG
HARD DISK DRIVE
2007 Product Guide
North America
Samsung Semiconductor, Inc.
3655 North First Street
San Jose, CA 95134
(949) 975-7135
South America
SAMSUNG ELECTRÔNICA DA AMAZONIA LTDA.
04578-000 Avenida das Nacoes Unidas,
12901- 8o Andar -Torre Oeste Sao Paulo SP, Brazil
55-5644-6400
Europe
“provides the most reliable storage solution”
Samsung Semiconductor Europe Gmbh.
Samsung House, Am Kronberger Hang 6,
65824 Schwalbach/Ts., Germany
49-(0)6196-66-1679
Asia / Pacific
Samsung Asia Pte Ltd.
049483 3 Church Street, #25-01/02, Singapore
65-6833-3304
China
SAMSUNG ELECTRONICS H.K.CO.LTD.
Suite 4511, Two Int'l Finance Centre No.8 Finance Street,
Central, Hong Kong
852-2862-6900
India
SAMSUNG INDIA ELECTRONICS Pvt.Ltd.
110019 7th-8th Floor, IFCI Towers, Nehru Place
New Delhi, India
91-11-415-11234
w w w .samsunghdd.com
Spinpoint is a trademark of Samsung Electronics Co., Ltd.
All brand and product names are trademarks of tradematks of their respective companies
design and specification are subject to change wihtout notice.®2007 Samsung Electronics Co., Ltd
Samsung Hard Disk Drive 2007 Product Guide
here were enormous changes in the HDD industry in the
past decade. The excessive competition among companies
T
Capture the World
had resulted in an industry wide deterioration of profitability
for some time.
Market w ith the best Quality
Wit h la rg e sca le re st ru ct u rin g o f t h e in d u st ry, Sa m su n g
Ele ctronics succe e de d in turning a round a n importa nt ye t
unprofitable HDD business into a profitable and dynamic one.
The improved product competitiveness and commitment to reliability are the keys we
relied on to achieve great success in such
a
difficult market environment. Especially
noteworthy, are the critical investments Samsung made years ago to ensure the highest
qualities of its products. These investments paid great dividends, and Samsung earned a
notable reputation from major OEMs with unmatched high quality standards. We have
also succeeded in expanding the product line-up from 3.5inch to 2.5inch hdd.
In a d d it io n , p a ra d ig m ch a n g e s in t h e st o ra g e b u sin e ss e n viro n m e n t o p e n a m p le
opportunity for Samsung to arise as a total storage solution leader in the industry.
Digital convergence trends of IT and consumer electronics dims the boundary between
t h e se t w o d iffe re n t b u sin e ss a re a s. Sa m su n g , w it h it s w e ll-kn o w n CE b u sin e ss
experiences, take advantages that no HDD companies can nourish.
Hereby, we contributed to achieving a perfect AV environment of PC by our success in
d e ve lo p in g a co u st ic n o ise su p p re ssio n t e ch n o lo g ie s su ch a s No ise Gu a rd TM a n d
SilentSeekTM. Samsung will continue to seek ways to leverage our productive R&D efforts,
as always.
Samsung plans to accelerate current business momentum with innovations
in co m p e t it ive n e ss su ch a s b e st p ro d u ct re lia b ilit y, fa st t im e -t o -m a rke t , su p e rio r
performance, and a noiseless operation environment.
Samsung Hard Disk Drive 2007 Product Guide
hen the 140MB HDD w as introduced in 1973,
n o o n e w o u ld h a ve e ve n im a g in e d t h e cu rre n t 500
W
Behold the High Capacity
Hard Disk Drive
Gig a b yt e s HDD in p ro d u ct io n t o d a y. Th e co m p le xit y o f
p ro g ra m s, a n d p o p u la r u se o f g ra p h ic / AV a p p lica t io n s,
inevitably makes the PC user to consider the capacity of HDD
as an important factor in selecting the PC along with the CPU
speed and the size of RAM memory. To address this change in
the market, Samsung has succeeded in producing the 500 Gigabytes hard disk drive,
constructed from three 166 Gigabytes per platter disks. This page will describe how this
high-capacity HDD now provides a new world of enjoyment and convenience to users.
AV Environment in PC With the rapid distribution of the PC and the Internet, more
and more users want to implement AV features of TV, VTR, and Recorder in their PCs.
Especially, in cases of users in urban areas, they prefer to purchase the PC with AV
features, instead of buying other electronic appliances, to make most out of limited
living spaces. This has enabled PCs with AV features, such as TV and PVR, to emerge in
the market. For example, a PC with
instant playback function on their PCs, without purchasing any separate PVR devices.
With 160 to 500 Gigabytes high-capacity HDD, they can also store and edit many
movies on their PCs. The consequence is that consumers can enjoy almost all AV features,
such as music, movies, Internet, and TV programs, with single PC. The high-capacity
a
built-in PVR feature, allows the user to use the
a
a
HDD allows users to store more movies and music titles on their PCs, and has dramatically
increased the range and quality of the PC experience for users.
Increase of PVR demand. When we think of HDD, we usually think of storage
mechanism in IT devices. Now, we can find this storage mechanism in device like Personal
video Recorder. More and more people tend to store their favorite movies, sports games,
and TV shows in their homes. With PVR, they can simply download these contents into
HDD inside it. Increasing demand of multimedia contents automatically increase the
demand for storage space to store.
High-capacity HDD to Increase Productivity for Professionals
Typically, 10 Gigabytes is required to produce a new catalogue for backup files. When
several persons are working together, it is more efficient and convenient to keep the
backup files on the HDD rather than on other media, such as CD RW and floppy disks.
Th e re fo re , t h e ca p a cit y o f t h e HDD ca n d ire ct ly a ffe ct t h e p ro d u ct ivit y le ve ls o f
professionals, such as graphic designers.
Samsung Hard Disk Drive 2007 Product Guide
here is an emerging trend to produce PCs focused
T
on AV, that seeks to maximize the efficiency of the AV
function through the Internet. For example, this kind of PC
would feature high-performance audio equipment such as
20W 2-way speaker to create better sound effects, and even a
built-in PVR function. What if the PC, designed around high
end AV features, was found to generate too much noise? It
The Perfect AV Environment
w ith Noiseless Hard Disk Drive
would be a significant problem.
Major Index of Quality for PC Recently, acoustic noise level has become the major
index of quality for many home appliances, such as air-conditioners and refrigerators.
The cooling fan of the CPU and HDD are major parts in the PC that generate noise. In
ca se o f t h e CPU co o lin g fa n t h a t g e n e ra t e s co n st a n t n o ise in id le m o d e , re ce n t
improvements in design have significantly reduced noise levels. Further, a new PC
without a CPU cooling fan has been introduced to eliminate this kind of noise. A HDD
usually generates 2.8 to 3.3 Bels in idle mode, and 3.0 to 3.5 Bels in seek mode. This level
of noise can cause distraction and annoyance to users, since many of them use their PC in
quiet environments, such as at night, where 3.0 Bels or less noise levels are typical.
The Cause of HDD noise The HDD generates different noise characteristics by the
frequency level. The biggest source of the noise is the spindle motor which generates
vibration from its rotating motor. The vibration is transferred to the outside of the HDD
and causes the noise. Also, the flow of air inside HDD caused by disk rotation can create
noise. During seek mode, the movement of the head actuator generates a very high-
pitched noise, familiar to all PC owners.
Noise GuardTM and SilentseekTM Technologies Samsung has developed and applied
NoiseGuardTM technology that is a combined technology to eliminate each noise source
or to minimize energy transmission. First, modification of the spindle motor's design
minimizes the noise source. In addition, the cover is designed to optimize the flow of air.
The Damper utilizes vibration absorbing material, installed on the area of highest
density, which maximizes the transmission of energy to the outside. Furthermore, to
minimize the data seeking noise that has always irritated users, we have developed and
applied SilentSeekTM technology, which makes the movement of the head actuator much
sm o o t h e r. Wh ile o t h e r co m p e t in g t e ch n o lo g ie s, su ch a s t h e AAM o p t io n , ca u se
performance degradation to lower the noise level, Samsung's SilentSeekTM technology
causes virtually no degradation in performance.
Samsung Hard Disk Drive 2007 Product Guide
hen the monitor, CD-ROM or RAM malfunctions, the
problem is limited to that particular part. However,
W
Maximize the Confidence
in Data Storage
malfunction in the HDD means far more greater problems in
other components. It is because most PC users consider their
HDD as the final storage device for their data. Therefore,
damage in the HDD generally causes enormous intellectual
property loss. This makes PC manufacturers consider the HDD
as the most important component to prevent hardware failure and data loss, as well as
the brand image loss that would soon follow. Samsung Electronics recognizes that
product reliability is the most important aspect of our business, and answers the needs of
PC manufacturers, while it leverages our most strategic investments. As a result, the
Samsung HDD has been recognized as the most reliable products by major PC OEM
manufacturers, which has advanced Samsung's global OEM position. This page provides a
brief description of how Samsung improved product reliability.
It would have been impossible to achieve the recent advances in the high product
reliability of our HDD product by improving single aspects of the technology or process.
Therefore, it could only be achieved by innovation of the entire process from the product
design to quality assurance. The most frequent problem that causes HDD malfunction is
t h e co llisio n o f t h e h e a d a n d d isk, a re su lt o f t h e sh o ck t h a t o ccu rs d u rin g t h e
transporting or installation of the HDD. Therefore, reducing the possibility of collision
between the head and the disk was seen by Samsung to be very important, if significant
enhancement of product reliability was to be achieved. By optimizing the head actuator
design in the early product design stage, Samsung eventually succeeded in maximizing
h e sh o ck-re sist a n ce w it h o u t t h e d e g ra d a t io n o f t h e p e rfo rm a n ce . Im p a cGu a rd TM
,
Samsung's patented technology, is designed to prevent any head actuator vibration
during a non-operating environment, which reduces the possibility of collision between
the head and the disk even further. Besides, HDD parts can also fail due to corrosion or
contamination. Samsung analyzed and eliminated these kinds of problems, at the source,
and in advance, by applying the best failure analysis technology adapted from our
experience in the semi- conductor business. For example, the microscopic pin holes on
the disk surface causes corrosion, which then causes one type of hardware failure.
Samsung analyzed this fact to solve the problem in cooperation with our disk component
suppliers. Automation of the manufacturing process was inescapable, since the HDD
consists of microscopic parts using
a
micrometer. For example, four screws are used to
assemble the disk onto the HDD. When this process is performed by manual labor, the
torques for each screw will be different, which, in turn, causes minute, but critical,
distortions of the disk. Also, when assembling the head actuator onto the disk, even an
infinite sima l misa lignme nt ca n ca use the he a d to scra tch the disk. With the most
a d va n ce d a u t o m a t e d m a n u fa ct u rin g lin e in t h e in d u st ry, Sa m su n g m in im ize s t h is
potential quality deviation that is possible by changes in the manufacturing process. In
addition, our specialized technology for HDD manufacturing is applied in the quality
assurance stage of production. As a result, our customers are allowed to focus on their
core business, reliably, in the most stable storage environment available, anywhere on
earth.
Samsung Hard Disk Drive 2007 Product Guide
..
igher..
..
Overview
Along with the development of mobile applications, mobile storage media is fast emerging as a hot
issue. The growing trend toward mobility can easily be witnessed at some companies where
employees are provided with notebook computers so that they can move to conference rooms at
their convenience. This is just one example, but it is clear that today there is a demand for improved
mobility. At the center of this issue is the hard disk. Mobile applications require several features from
hard disks, including low energy consumption and the ability to absorb external shock. These
requirements are especially important in the case of notebook computers. Other features required by
users of personal computers include fast boot times and data stability. Hybrid hard disk drive (HHDD)
..Reliabilit
..Faster
oot and Resume..
esistance..
..Better shock
refers to
a
leading product that incorporates the advantages of flash into the hard disk drive,
satisfying the requirements like energy consumption and reduced boot time. HHDD adds NV Cache (
Non-Volatile Cache ) to the conventional hard disk drive; significantly improving the read and write
caching functions for the enhancement of data input/output as well as the computer's overall
..
nstant access..
ca p a cit y. In d e e d , t h is is t h e first t yp e t o co m b in e
a
m a g n e t ic st o ra g e d e vice w it h d ig it a l
..Re
uce Pow er Consumption..
semiconductor. Unlike the hard disk drive, which requires a certain rotational speed (5400 RPM) in
order to boot, HHDD stores the boot-related data in a built-in flash cache memory. This enables an
ultra fast boot time of less than five seconds: a remarkable achievement compared to the current
standard of between 20 and 30 seconds. Additionally, battery life is expected to increase by
approximately 20-50 minutes.
Hybrid HDD
New Era of Storage
R/W
DRAM
Cache
Up to 90% Power Saving
when powered down
spindle
drive
SOIC/
CPU
ATA Interface
Read and Write instantly
while spindle stopped
OneNAND
Cache
seek
Hybrid Disk Drive Benefits
The benefits of the Hybrid HDD
1. Reduced boot time and improved system capacity
HHDD has flash memory playing a supplementary role to DRAM in order to dramatically reduce the
boot time and improve system capacity. As the read-function of flash memory is much faster than
that of a hard disk drive, it is possible to have the boot image file for a personal computer or other
user files stored using the flash beforehand and read in order to achieve a faster system speed. This is
particularly valuable for an OS that employs a 3D interface, such as Windows Vista.
2. Reduced pow er consumption.
HHDD uses less electricity. Through the OS paging-out process (virtual memory manager stores
unnecessary data onto the hard disk drive), personal computers regularly write data onto the hard
disk drive. In other words, every time data is stored the hard disk drive, the hard drive needs to spin-
up, consuming electricity: the more frequent the writing, the more electricity is consumed. HHDD,
however, enables write-caching of regular data using flash memory in order to minimize the need for
the hard disk drive to spin-up, thereby reducing the system's overall power consumption.
3. Improved durability and reliability
HHDD offers improved durability and reliability. Insofar as the need for the HDD to spin-up is
minimized, this also serves to shorten the duty cycle of the HDD, lowering the probability of head-
media collisions and errors (off-track write, etc). This can lead to increasing the MTBF.
Samsung Hard Disk Drive 2007 Product Guide
What is PMR?
PMR Technology
Growth of the HDD industry has in the past been explosive, as recording density effectively doubled
each year. But since 2003 this growth rate has radically slowed down, leveling off at about 30-40% a
year. This slowdown has been attributed to difficulties in further increasing the density to meet
continuing demands for ever-higher recording density. As a result, the HDD industry has continued to
devise new technologies capable of allowing for higher recording densities. One such technology is
the recording method known as PMR (Perpendicular Magnetic Recording).
Technology Overview
PMR (Perpendicular Magnetic Recording) and LMR (Longitudinal Magnetic Recording) are recording
methods. As indicated by their names, PMR arranges magnetized cells vertically while LMR does so in
a horizontal fashion. This vertical arrangement allows PMR to record a greater number of data bits in
the same area. The primary reason why density is limited through LMR is a result of what is called
superparamagnetism. Superparamagnetism refers to the phenomenon by which magnetized
materials move closer as the density increases, to the point where they eventually interfere with one
another. As magnetized cells become unstable and as their magnetism changes direction, any stored
data can be rendered unusable. By avoiding superparamagnetism, PMR enables one to further
increase recording density. It is believed that PMR will reach a maximum recording density of 1 TB/in2
(LMR: 200 GB/in2).
Longitudinal Recording
Perpendicular Recording
Monopole
Inductive Write Element
“Ring”
Inductive Write Element
Shield
P1
2
P2
Shield
P1
2
P2
Read Element
GMR Sensor
V Write
V Write
Shield 1
Recording
Medium
Recording
Medium
Soft
Underlayer
Return Pole
Magnetizations
Distance
Distance
Transition
region
Transition
region
Spinpoint T166 series
80.0/160.0/250.0/320.0/400.0.500.0GB
Capacity1
Model
80GB
160GB
250GB
320GB
400GB
500GB
8MB
16MB
HD080GJ HD160HJ HD251KJ HD320KJ HD402LJ HD500LJ
HD252KJ HD321KJ HD403LJ HD501LJ
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Serial ATA II 3.0Gbps
512
Temperature
Bytes per Sector
Buffer DRAM Size
-Operating
0~60°C
-40~70°C
20°C/hr
8 / 16 MB
-Non-operating
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track
5~90 %
5~95 %
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18 ms
63 G
350 G
300 G
-Average Latency
4.17 ms
7,200 rpm
-Non-operating, 2ms
80-160GB
250-500GB
-Rotational Speed2
Data Transfer Rate
-Media to/from Buffer(max.)
-Buffer to/from Host(max.)
Drive Ready Time(typ.)
Vibration (sw ept sine, 0.25 octave per minute)
135 MB/sec
300 MB/sec
10 sec
Operating
5 ~ 21 Hz
0.034” (double amplitude)
1.5 G0-p
21 ~ 300 Hz
Non-operating
5 ~ 21 Hz
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
0.195” (double amplitude)
8 G0-p
1 sector in 1014 bits
600,000 POH
50,000
21 ~ 500 Hz
Altitude (relative to sea level)
-Operating
• Max. 167GB Formatted Capacity Per Disk
• Serial ATA 3.0Gbps Interface Support
• SATA Native Command Queuing Feature set
• Device Initiated SATA Pow er Management
• Staggerd Spin-up Support
Start/Stop Cycles(Ambient)
Component Design Life
-1,000 to 10,000 feet
-1,000 to 40,000 feet
5 years
-Non-operating
ACOUSTICS (AVERAGE SOUND POWER)3
POWER REQUIREMENTS
-Idle
80-160GB
250-500GB
80-160GB
250-500GB
2.3 Bel
2.7 Bel
2.7 Bel
2.9 Bel
Voltage
+5V° 5% / +12V° 10%
80/160GB 250/320GB 400/500GB
-Random Read/Write
Spin Up Current(12V)
Seek4
2.0A
9.5W
2.3A
12.8W
2.4A
9.5W
• High Speed Dual Digital Signal Processor (DSP) Based
Architecture
Read/Write
8.0W
8.8W
8.0 W
Idle
6.5W
7.6W
8.2W
*Notes:Design and specifications are subject to change
without prior notice
Standby5
Sleep5
0.5/1.0W
0.5/1.0W
0.7/1.2W
0.7/1.2W
0.7/1.2W
0.7/1.2W
• ATA S.M.A.R.T. Compliant
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set(Optional)
• ATA Device Configuration Overlay Feature Set
• NoiseGuard™
PHYSICAL DIMENSION
Height
Width
Depth
Weight
1 in
4 in
5.75 in
1.13 lb
1.35 lb
1.41 lb
80/160GB
250/320GB
400/500GB
• SilentSeek™
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. 7,200 RPM class. Actual speed can be different a little.
3. Averaged value with a high performance cover.
4. Random seek with 30% duty cycle.
5. Power consumption with/without slumber mode.
Spinpoint T133S series
300.0/400.0GB
Capacity1
Model
300GB
400GB
SATA,8MB
HD300LJ
HD400LJ
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
Serial ATA 3.0
512
Bytes per Sector
Buffer DRAM Size2
-Operating
0~60°C
8 MB
-Non-operating
-40~70°C
20°C/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track
5~90 %
5~95 %
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18 ms
63 G
-Average Latency
4.17 ms
7,200 rpm
-Non-operating, 2ms
300 G
-Rotational Speed
Vibration (sw ept sine, 0.5 octave per minute)
Maximum Data Transfer Rate
-Media to/from Buffer(max.)
-Buffer to/from Host
Drive Ready Time(typ.)
Operating
742/1000 Mbits/sec
300 MB/sec
10 sec
5 - 300 - 5 Hz
1.0 G0-p
Non-operating
5 - 500 - 5 Hz
2.0 G0-p
Altitude (relative to sea level)
-Operating
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
-1,000 to 10,000 feet
-1,000 to 40,000 feet
1 sector in 1014 bits
600,000 POH
50,000
-Non-operating
• Serial ATA 3.0 Compliant
Start/Stop Cycles(Ambient)
Component Design Life
POWER REQUIREMENTS
5 years
Voltage
+5V° 5% / +12V° 10%
880 / 2250 mA
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based Architecture
• ATA S.M.A.R.T. Compliant
Spin Up Current(max.)
Seek4 (typ.)
ACOUSTICS (AVERAGE SOUND POWER)
9.45
8.75
7.25
0.65
0.65
W
W
W
W
W
-Idle
2.7 Bel
2.9 Bel
Read on-Track(typ.)
Idle(typ.)
• ATA Security Mode Feature Set
-Random Read/Write
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
Standby(typ.)
Sleep(typ.)
*Notes:Design and specifications are subject to change
without prior notice
PHYSICAL DIMENSION
• ATA Streaming Feature Set3
Height
Width
Depth
Weight
1 in
4 in
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
5.75 in
1.44 lb
• SilentSeek™
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. 128KB is used for firmware
3. For ATA-6 interface models only
4. 30% duty cycle, random seek
5. Power based on enabled DIPM and SATA 3.0Gbps speed
Spinpoint T133 series
300.0/400.0GB
Capacity1
Model
300GB
400GB
PATA,8MB
HD300LD
HD400LD
PERFORMANCE SPECIFICATIONS
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 6
512
Bytes per Sector
-Operating
0~60°C
Buffer DRAM Size2
8 MB
-Non-operating
-40~70°C
20°C/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track
5~90 %
5~95 %
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18 ms
63 G
-Average Latency
4.17 ms
7,200 rpm
-Non-operating, 2ms
300 G
-Rotational Speed
Vibration (sw ept sine, 0.5 octave per minute)
Maximum Data Transfer Rate
-Media to/from Buffer(max.)
-Buffer to/from Host
Drive Ready Time(typ.)
Operating
742/1000Mbits/sec
100 MB/sec
10 sec
5 - 300 - 5 Hz
1.0 G0-p
Non-operating
5 - 500 - 5 Hz
2.0 G0-p
Altitude (relative to sea level)
-Operating
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
-1,000 to 10,000 feet
-1,000 to 40,000 feet
1 sector in 1014 bits
600,000 POH
50,000
-Non-operating
• Ultra ATA-100 Compliant
Start/Stop Cycles(Ambient)
Component Design Life
POWER REQUIREMENTS
5 years
Voltage
+5V° 5% / +12V° 10%
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based Architecture
• ATA S.M.A.R.T. Compliant
Spin Up Current(max.)
Seek5 (typ.)
880 / 2250 mA
9.2 W
ACOUSTICS (AVERAGE SOUND POWER)
-Idle
2.7 Bel
2.9 Bel
Read on-Track(typ.)
Idle(typ.)
8.4 W
• ATA Security Mode Feature Set
-Random Read/Write
8.0 W
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
Standby(typ.)
Sleep(typ.)
0.7 W
*Notes:Design and specifications are subject to change
without prior notice
0.45 W
PHYSICAL DIMENSION
• ATA Streaming Feature Set4
Height
Width
Depth
Weight
1 in
4 in
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
5.75 in
1.44 lb
• SilentSeek™
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. 128KB is used for firmware
3. For ATA-6 interface models only
4. 30% duty cycle, random seek
5. Power based on enabled DIPM and SATA 3.0Gbps speed
Spinpoint P120S series
200.0/250.0GB
Capacity1
Model
200GB
250GB
SP2004C
SP2504C
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Serial ATA 3.0 Gbps
Temperature
Buffer DRAM Size2
Bytes per Sector
8 MB
512
-Operating
0 ~ 60 ºC
-Non-operating
-40 ~ 70 ºC
20 ºC/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18 ms
63G
-Average Latency
4.17 ms
7,200 rpm
-Non-operating, 2ms
350G
-Rotational Speed
Vibration (sw ept sine, 1 octave per minute)
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)
Operating
973 MB/sec
300 MB/sec
7 sec
5 ~ 21 Hz
0.034” (double amplitude)
21 ~ 300 Hz
Non-operating
5 ~ 21 Hz
1.5 Gp-p
0.195” (double amplitude)
8 Gp-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
21 ~ 500 Hz
1 sector in 1014 bits
600,000 POH
50,000
Altitude (relative to sea level)
-Operating
-1,000 to 10,000 ft
-1,000 to 40,000 ft
• 125GB Formatted Capacity Per Disk
• Serial ATA 3.0Gbps Interface Support
• SATA Native Command Queuing Feature set
• Device Initiated SATA Pow er Management
• Staggered Spin-up Support
Start/Stop Cycles (Ambient)
Component Design Life
-Non-operating
5 years
POWER REQUIREMENTS
Voltage
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5% ,+12V±10%
650 / 1900 mA
9.5 W
-Idle
2.5 Bel
2.8 Bel
Spin Up Current (max.)
Seek (typ.)3
-Random Read/Write
• High Speed Dual Digital Signal Processor (DSP) Based
Architecture
Read/Write On-Track (typ.)
Idle (typ.)
8.5 W
*Notes:Design and specifications are subject to change
without prior notice
7.5 W
Standby (typ.)
0.7/1.5 W4
0.7/1.5 W4
• ATA S.M.A.R.T. Compliant
Sleep (typ.)
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set
PHYSICAL DIMENSION
Height
Width
Depth
Weight
1 in
4 in
• ATA Device Configuration Overlay Feature Set
• NoiseGuard™
5.75 in
1.4 lb
• SilentSeek™
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. Upper 128 KB is used for firmware
3. 30% duty cycle, random seek
4. Power consumption with / without slumber mode
Spinpoint P120 series
200.0/250.0GB
Capacity1
Model
200GB
250GB
8MB
SP2014N
SP2514N
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 7
512
Bytes per Sector
Buffer DRAM Size2
-Operating
0~60°C
8 Mbytes
-Non-operating
-40~70°C
20°C/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typical)
-Track to track
5~90%
5~95%
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18 ms
63 G
-Average Latency
4.17 ms
7,200 rpm
-Non-operating, 2ms
350 G
-Rotational Speed
Vibration (sw ept sine, 1 octave per minute)
Data Transfer Rate
Operating
-Media to/from Buffer(max.)
-Buffer to/from Host(max.)
Drive Ready Time(typical)
973 Mbits/s
133 Mbytes/s
7 sec
5 ~ 21 Hz
0.034" (double amplitude)
21 ~ 300 Hz
Non-operating
5 ~ 21 Hz
1.5 Gp-p
0.195" (double amplitude)
8 Gp-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
21 ~ 500 Hz
1 sector in 1014 bits
600,000 POH
50,000
Altitude (relative to sea level)
-Operating
-1,000 to 10,000 feet
-1,000 to 40,000 feet
• 125GB Formatted Capacity Per Disk
• Ultra ATA-133 Interface Support
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based
Architecture
Start/Stop Cycles(Ambient)
Component Design Life
-Non-operating
5 years
POWER REQUIREMENTS
ACOUSTICS (AVERAGE SOUND POWER)
Voltage
+5V° 5% / +12V° 10%
-Idle
2.5 Bel
2.8 Bel
Spin Up Current(max.)
Read/Write On-Track(typ.)
Seek (typ.)3
650 / 1900 mA
7.5 W
-Random Read/Write
• ATA S.M.A.R.T. Compliant
9.0 W
*Notes:Design and specifications are subject to change
without prior notice
Idle(typ.)
7.0 W
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set
Standby(typ.)
Sleep(typ.)
0.5 W
0.4 W
PHYSICAL DIMENSION
Height
Width
Depth
Weight
1 in
4 in
• ATA Device Configuration Overlay Feature Set
• NoiseGuard™
5.75 in
1.4 lb
• SilentSeek™
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. Upper 128 KB is used for firmware
3. 30% duty cycle, random seek
4. Backward compatible with UDMA 33/66/100
Factory default UDMA100 unless customer request
Spinpoint P80SD series
40.0/80.0/120.0/160.0GB
Capacity1
Model
40GB
80GB
120GB
160GB
HD040GJ
HD080HJ
HD120IJ
HD160JJ
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
Serial ATA 3.0 Gbps
Buffer DRAM Size2
Bytes per Sector
8 MB
512
-Operating
5~55°C
-Non-operating
-40~70°C
20°C/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to track
5~90 %
5~95 %
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18.0 ms
4.17 ms
7,200 rpm
63 G
-Average Latency
-Non-operating, 2ms
350 G
-Rotational Speed
Vibration (sw ept sine, 1 octave per minute)
Maximum Data Transfer Rate
-Media to/from Buffer
-Buffer to/from Host
Drive Ready Time (typ.)
Operating
845
300 MB/sec
7 sec
5 ~ 21 Hz
0.034" (double amplitude)
21 ~ 300 Hz
Non-operating
5 ~ 21 Hz
1.5 Gp-p
0.195" (double amplitude)
8 Gp-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
21 ~ 500 Hz
1 sector in 1014 bits
500,000 POH
50,000
Altitude (relative to sea level)
-Operating
-1,000 to 10,000 feet
-1,000 to 40,000 feet
• 80GB Formatted Capacity Per Disk
Start/Stop Cycles (Ambient)
Component Design Life
-Non-operating
5 years
• Native Serial ATA 3.0Gbps w ith Native Command Queuing (NCQ)
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor (DSP) Based Architecture
POWER REQUIREMENTS
Voltage
ACOUSTICS (AVERAGE SOUND POWER)
+5V 5% / 12V 10%
650 / 1900 mA
9.0 W
-Idle
2.5 Bel
2.8 Bel
Spin Up Current(max.)
Seek3 (typ.)
•
ATA SMART Compliant
-Random Read/Write
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set
Read/Write On-Track(typ.)
Idle(typ.)
8.0 W
*Notes:Design and specifications are subject to change
without prior notice
6.8 W
Standby(typ.)
0.7 / 1.5 W5
0.7 / 1.5 W5
Sleep(typ.)
PHYSICAL DIMENSION
Height
Width
Depth
Weight
1 in
4 in
• ATA Pow er Up In Standby Feature Set
• ATA Device Configuration Overlay Feature Set
• Permuted RLL/ECC On-The-Fly Error Correction
• RoHS-compliant
5.75 in
1.45 lb
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
• NoiseGuard™
• SilentSeek™
2. 384 KB is used for firmware
3. 30% duty cycle, random seek
• Hot-Plug & Hot-Sw ap capable
4. Unless otherwise specified, specifications are for both
1 and 2 disk configurations of Serial-ATA models
5. Power consumption with / without slumber mode
Spinpoint P80 series
80.0/120.0/160.0GB
1MB = 1,000,000 Bytes. 1GB = 1,000,000,000 Bytes
Capacity1
Model
80GB
120GB
160GB
2MB
8MB
SP0842N
SP1243N
SP1253N
SP1644N
SP1654N
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 6
512
Bytes per Sector
Buffer DRAM Size1
-Operating
5~55°C
2/8 Mbytes
-Non-operating
-40~70°C
20°C/hr
-Thermal Gradient (max.)
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typical)
-Track to track
5~90%
5~95%
0.8 ms
8.9 ms
-Non-operating
-Average
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Full Stroke
18.0 ms
4.17 ms
7,200 rpm
63 G
-Average Latency
-Non-operating, 2ms
350 G
-Rotational Speed
Vibration (sw ept sine, 1 octave per minute)
Data Transfer Rate
Operating
-Media to/from Buffer(max.)
-Buffer to/from Host(max.)
Drive Ready Time(typical)
840 Mbits/s
133 Mbytes/s
7 sec
5 ~ 21 Hz
0.034" (double amplitude)
21 ~ 300 Hz
Non-operating
5 ~ 21 Hz
1.5 Gp-p
0.195" (double amplitude)
8 Gp-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF(POH)
21 ~ 500 Hz
1 sector in 1014 bits
500,000 POH
50,000
Altitude (relative to sea level)
-Operating
-1,000 to 10,000 feet
-1,000 to 40,000 feet
• 80GB Formatted Capacity Per Disk
• Ultra ATA-133 Compatible
Start/Stop Cycles
-Non-operating
Component Design Life
5 years
POWER REQUIREMENTS
Voltage
• Fluid Dynamic Bearing Spindle Motor Technology
• High Speed Dual Digital Signal Processor
(DSP) Based Architecture
ACOUSTICS (AVERAGE SOUND POWER)
5V° 5% / 12V° 10%
-Idle
2.7 Bel
2.8 Bel
Spin Up Current(max.)
Read/Write On-Track(typ.)
Seek (typ.)2
780 / 2250 mA
8.0 W
-Random Read/Write
• ATA S.M.A.R.T. Compliant
9.0 W
*Notes:Design and specifications are subject to change
without prior notice
Idle(typ.)
7.2 W
• ATA Security Mode Feature Set
• ATA Host Protected Area Feature Set
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
• ATA Streaming Feature Set (Optional)
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• NoiseGuard™
Standby(typ.)
0.4 W
Sleep(typ.)
0.4 W
PHYSICAL DIMENSION
Height
Width
Depth
Weight
1 inch
4 inches
5.75 inches
1.45 pounds
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
• SilentSeek™
1. 128 KB is used for firmware
2. 30% duty cycle, random seek
• ImpacGuard™
Spinpoint M80S series
80.0/120.0/160.0GB
Capacity1
Model
80GB
120GB
160GB
HM080HI
HM120II
HM160JI
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
SATA 1.5Gbps
Buffer DRAM Size3
Bytes per Sector
8 Mbytes
512
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
325G
-Full Stroke
22 ms
-Non-operating, 1ms
1000G
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)3
5 ~ 500 Hz
1.0 Go-p
530Mb/s
150MB/s
Non-operating
10 ~21 Hz
0.195 in(double amp)
5 Go-p
4 sec
21 ~ 500Hz
RELIABILITY
500~800Hz
3 Go-p
SPECIFICATIONS
Altitude (relative to sea level)
-Operating
Non-recoverable Read Error
MTBF
1 sector in 1014 bits
330,000 POH
600,000
-1000 to 10000 ft
-1400 to 50000 ft
-Non-operating
• 80GB Formatted Capacity Per Disk
Controlloed Ramp L/UL
POWER REQUIREMENTS
Voltage
• TuMR head w ith w ireless suspension design
• Serial ATA 1.5Gbps Interface Support
• SATA Native Command Queuing Feature set
• Device Initiated SATA Pow er Management
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5%
4.5 W
-Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Spin Up (max.)
Seek (typ.)5
2.1 W
-Random Read/Write
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.0 W
0.60 W
0.25 W
0.20 W
*Notes:Design and specifications are subject to change
without prior notice
Sleep (typ.)
• ATA Security Mode Feature Set
• ATA SMART Feature Set
PHYSICAL DIMENSION
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
• ATA Automatic Acoustic Management Feature Set
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
• Hybrid Latch System for Reliability and Quietness
2. Upper 128 KB is used for firmware
3. Power-On to Drive Ready
4. 30% duty cycle, random seek
5. Power requirements based on 1.5Gbps speed
6. Unless otherwise specified, specifications are
for 2-disk configuration
Spinpoint M80 series
80.0/120.0/160.0GB
Capacity1
Model
80GB
120GB
160GB
HM080HC
HM120IC
HM160JC
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 6
Buffer DRAM Size3
Bytes per Sector
8 Mbytes
512
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
325G
-Full Stroke
22 ms
-Non-operating, 1ms
1000G
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)3
5 ~ 500 Hz
1.0 Go-p
530Mb/s
150MB/s
Non-operating
10 ~21 Hz
0.195 in(double amp)
5 Go-p
4 sec
21 ~ 500Hz
RELIABILITY
500~800Hz
3 Go-p
SPECIFICATIONS
Altitude (relative to sea level)
-Operating
Non-recoverable Read Error
MTBF
1 sector in 1014 bits
330,000 POH
600,000
-1000 to 10000 ft
-1400 to 50000 ft
-Non-operating
• 80GB Formatted Capacity Per Disk
• TuMR head w ith w ireless suspension design
• Ultra ATA-100 Interface
Controlloed Ramp L/UL
POWER REQUIREMENTS
Voltage
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5%
4.5 W
-Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Spin Up (max.)
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
Seek (typ.)5
2.1 W
-Random Read/Write
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.0 W
• ATA Security Mode Feature Set
0.60 W
0.25 W
0.10 W
• ATA SMART Feature Set
*Notes:Design and specifications are subject to change
without prior notice
Sleep (typ.)
• ATA Automatic Acoustic Management Feature Set
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
PHYSICAL DIMENSION
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
• Hybrid Latch System for Reliability and Quietness
Specifications are subject to change without notice.
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. Upper 128 KB is used for firmware
3. Power-On to Drive Ready
4. 30% duty cycle, random seek
5. Power requirements based on 1.5Gbps speed
6. Unless otherwise specified, specifications are
for 2-disk configuration
Spinpoint M60S series
40.0/60.0/80.0/100.0/120.0GB
Capacity1
Model
40GB
60GB
80GB
100GB
120GB
HM040HI
HM060HI
HM080II
HM100JI
HM120JI
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
SATA 1.5Gbps(3.0Gbps)3
Buffer DRAM Size3
Bytes per Sector
8 Mbytes
512
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
300G
-Full Stroke
22 ms
-Non-operating, 1ms
1000G
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)4
5 ~ 500 Hz
1.0 Go-p
495Mb/s
150MB/s
Non-operating
10 ~21 Hz
0.195 in(double amp)
5 Go-p
4 sec
21 ~ 500Hz
RELIABILITY
500~800Hz
3 Go-p
SPECIFICATIONS
Altitude (relative to sea level)
-Operating
Non-recoverable Read Error
MTBF
1 sector in 1014 bits
330,000 POH
600,000
-1000 to 10000 ft
-1400 to 40000 ft
-Non-operating
• Serial ATA 1.5Gbps(3.0Gbps) Interface Support
• SATA Native Command Queuing Feature set
• Device Initiated Pow er Management
Controlloed Ramp L/UL
POWER REQUIREMENTS
Voltage
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5%
4.5 W
-Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Spin Up (max.)
• 60GB Formatted Capacity Per Disk
Seek (typ.)5
2.1 W
• GMR/TuMR head w ith w ireless suspension design
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
-Random Read/Write
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.0 W
0.65 W
0.25 W
0.15 W
*Notes:Design and specifications are subject to change
without prior notice
Sleep (typ.)
• ATA Security Mode Feature Set
• ATA SMART Feature Set
PHYSICAL DIMENSION
• ATA Automatic Acoustic Management Feature Set
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• Hybrid Latch System for Reliability and Quietness
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
TM
• SilentSeek
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. SATA interface speed switchable with Jumper
3. Upper 128 KB is used for firmware
4. Power-On to Drive Ready
5. 30% duty cycle, random seek
6. Power requirements based on 1.5Gbps speed
7. Unless otherwise specified, specifications are
for 2-disk configuration
Spinpoint M60 series
40.0/60.0/80.0/100.0/120.0GB
Capacity1
Model
40GB
60GB
80GB
100GB
120GB
HM040HC HM060HC HM080IC
HM100JC
HM120JC
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 6
8 Mbytes
512
Buffer DRAM Size2
Bytes per Sector
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
300G
-Full Stroke
22 ms
-Non-operating, 1ms
1000G
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)3
5 ~ 500 Hz
1.0 Go-p
495Mb/s
100MB/s
4 sec
Non-operating
10 ~21 Hz
0.195 in(double amp)
5 Go-p
21 ~ 500Hz
500~800Hz
3 Go-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
Altitude (relative to sea level)
-Operating
1 sector in 1014 bits
330,000 POH
-1000 to 10000 ft
-1400 to 40000 ft
-Non-operating
• Device Initiated Pow er Management
• 60GB Formatted Capacity Per Disk
Controlloed Ramp L/UL 600,000
POWER REQUIREMENTS
Voltage
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5%
4.5 W
• GMR/TuMR head w ith w ireless suspension design
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
-Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Spin Up (max.)
Seek (typ.)5
2.1 W
-Random Read/Write
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.0 W
• ATA Security Mode Feature Set
0.65 W
0.25 W
0.1 W
• ATA SMART Feature Set
*Notes:Design and specifications are subject to change
without prior notice
Sleep (typ.)
• ATA Automatic Acoustic Management Feature Set
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• Hybrid Latch System for Reliability and Quietness
PHYSICAL DIMENSION
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
TM
• SilentSeek
1. 1MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. Upper 128 KB is used for firmware
3. Power-On to Drive Ready
4. 30% duty cycle, random seek
5. Unless otherwise specified, specifications are
for 2-disk configuration
Spinpoint M40S series
40.0/60.0/80.0GB
Capacity1
Model
40GB
60GB
80GB
HM040HI
HM060II
HM080JI
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
SATA 1.5Gbps
Buffer DRAM Size2
Bytes per Sector
8 Mbytes
512
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
300G
900G
-Full Stroke
22 ms
-Non-operating, 1ms
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)3
5 ~ 500 Hz
1.0 Go-p
428Mb/s
150MB/s
4 sec
Non-operating
10 ~21 Hz
0.195 in(double amp)
5 Go-p
21 ~ 500Hz
500~800Hz
3 Go-p
RELIABILITY SPECIFICATIONS
Non-recoverable Read Error
MTBF
Altitude (relative to sea level)
-Operating
1 sector in 1014 bits
330,000 POH
600,000
-1000 to 10000 ft
-1400 to 40000 ft
-Non-operating
• 40GB Formatted Capacity Per Disk
Controlloed Ramp L/UL
POWER REQUIREMENTS
Voltage
• GMR head technology w ith w ireless suspension design
• Ultra ATA-100 Interface Serial ATA 1.5Gbps
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
ACOUSTICS (AVERAGE SOUND POWER)
+5V±5%
4.5 W
-Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Spin Up (max.)
Seek (typ.)4
2.1 W
-Random Read/Write
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.0 W
• ATA Security Mode Feature Set
0.65 W
0.25 W
0.15 W
• ATA SMART Feature Set
*Notes:Design and specifications are subject to change
without prior notice
Sleep (typ.)
• ATA Automatic Acoustic Management Feature Set
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
PHYSICAL DIMENSION
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
• Hybrid Latch System for Reliability and Quietness
1. MB=1,000,000 Bytes 1GB=1,000,000,000 Bytes
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
2. Upper 128 KB is used for firmware
3. Power-On to Drive Ready
4. 30% duty cycle, random seek
5. Unless otherwise specified, specifications are
for 2-disk configuration
Spinpoint M40 series
40.0/60.0/80.0GB
Capacity1
Model
40GB
60GB
80GB
MP0402H
MP0603H
MP0804H
DRIVE CONFIGURATION
Interface
ENVIRONMENTAL SPECIFICATIONS
Temperature
ATA 6
Buffer DRAM Size1
Bytes per Sector
8 Mbytes
512
-Operating
5 ~ 55 ºC
-Non-operating
-40 ~ 70 ºC
Humidity (non-condensing)
-Operating
PERFORMANCE SPECIFICATIONS
Read Seek Time (typ.)
-Track to Track
5 ~ 90 %
5 ~ 95 %
-Non-operating
2 ms
12 ms
Linear Shock (1/2 sine pulse)
-Operating, 2ms
-Average
300G
900G
-Full Stroke
22 ms
-Non-operating, 1ms
-Average Latency
5.6 ms
Vibration (sw ept sine, 1/4 octave per minute)
-Rotational Speed
5,400 rpm
Operating
Data Transfer Rate
-Media to/from Buffer (max.)
-Buffer to/from Host (max.)
-Drive Ready Time (typ.)2
-5 ~ 500 Hz
1.0 Go-p
431Mb/s
100MB/s
4 sec
Non-operating
-10 ~21 Hz
0.195 in(double amp)
5 Go-p
-21 ~ 500Hz
-500~800Hz
3 Go-p
RELIABILITY
Altitude (relative to sea level)
Operating
SPECIFICATIONS
-1000 to 10000 ft
-1400 to 50000 ft
Non-recoverable Read Error
MTBF
1 sector in 1014 bits
330,000 POH
600000
Non-operating
• 40GB Formatted Capacity Per Disk
• GMR head technology w ith w ireless suspension design
• Ultra ATA-100 Interface
Controlloed Ramp L/UL
Component Design Life
POWER REQUIREMENTS
Voltage
5 years
+5V±5%
5.0 W
Spin Up Current (max.)
Seek (typ.)3
ACOUSTICS (AVERAGE SOUND POWER)
2.4 W
• Fluid Dynamic Bearing Spindle Motor Technology
• Load/Unload Head Technology
Idle
1-Disk
2-Disk
1-Disk
2-Disk
2.2 Bel
2.4 Bel
2.4 Bel
2.6 Bel
Read/Write On-Track (typ.)
Low Power Idle (typ.)
Standby (typ.)
2.4 W
0.85 W
0.25 W
0.1 W
Random Read/Write
• ATA Security Mode Feature Set
Sleep (typ.)
• ATA SMART Feature Set
*Notes:Design and specifications are subject to change
without prior notice
• ATA Automatic Acoustic Management Feature Set
• ATA 48-bit Address Feature Set
PHYSICAL DIMENSION
Height
Width
Depth
Weight
0.37 in
3.94 in
2.75 in
0.22 lb
• ATA Device Configuration Overlay Feature Set
• Multi-Burst On-The-Fly Error Correction
• SilentSeek™
*Accessible capacity may vary as some OS uses binary
numbering system for reported capacity
1. Upper 128 KB is used for firmware
2. Power-On to Drive Ready
3. 30% duty cycle, random seek
*
Unless otherwise specified, specifications are
for 2-disk configuration
Sa m su n g HDD 2007 Pro d u ct Gu id e
Why Samsung
Hard Disk Drive?
Our quality is based on our ACCESS TO FUNDAMENTAL TECHNOLOGY, not only for
Samsung's own R&D resources within the HDD division, but also from various R&D
re so u rce s w it h in t h e Sa m su n g g ro u p . SAIT(Sa m su n g Ad va n ce d In st it u t e o f
Technology) developed Acoustic Noise Suppression Technology, which is utilized
in all Samsung HDDs. SAIT also provides Head Stack, Read Channel, Spindle Motor,
Servo Control System and Optical Technologies. Similarly, Samsung Electronic's
corporate R&D center developed vibration suppression technology.
SAMSUNG AWARD WINNING
Year
|
TRENDnet TU2 PMLINK User Manual
Toastmaster TCM12PW User Manual
Toastmaster MAXCM12W User Manual
Sony Ericsson W660I User Manual
Sony CDX 4800X User Manual
Seagate Barracuda ST3160023AS User Manual
Samsung SGH SGH P735 User Manual
Samsung SGH i600 User Manual
Panasonic SC AK523 User Manual
Palm TheTreoTM 600 User Manual