SGH-x427
Portable Digital Telephone
User Manual
Please read this manual before operating your phone,
and keep it for future reference.
Printed in Korea
GH68-04323A
English. 08/2003. Rev. 1.0
Samsung Telecommunications America
(STA), Inc.
Headquarters:
1130 E. Arapaho Road
Richardson, TX 75081
Tel: 972-761-7000
Fax: 972-761-7001
Customer Care Center:
1601 E. Plano Parkway
Suite 150
Plano, TX 75047
Tel: 888-987-HELP (4357)
Fax: 972-761-7501
Internet Address: http://www.samsungusa.com/wireless
©2003 Samsung Telecommunications America. All rights
reserved. No reproduction in whole or in part allowed
without prior written approval. Samsung is a registered
trademark of Samsung Electronics America, Inc. and its
related entities.
iii
iv
Contents
Unpacking.............................................................. 7
Display......................................................................... 12
Service Light................................................................. 15
Getting Started .................................................... 16
Installing the SIM Card................................................... 16
Charging a Battery ........................................................ 19
Switching the Phone On/Off ............................................ 21
Call Functions ...................................................... 23
Making a Call ................................................................ 23
Adjusting the Volume..................................................... 26
Answering a Call............................................................ 27
Viewing Missed Calls ...................................................... 28
Quickly Switching to Silent Mode ..................................... 30
Selecting Functions and Options .......................... 31
Phonebook........................................................... 34
Storing a Number with a Name........................................ 34
Using Phonebook Entry Options....................................... 37
Searching for a Number in Phonebook.............................. 38
Editing a Caller Group .................................................... 41
Speed-dialing................................................................ 42
Checking the Memory Status........................................... 44
1
Contents
Changing the Text Input Mode ........................................ 46
Using T9 Mode .............................................................. 47
Switching the Microphone Off (Mute)................................ 54
Searching for a Number in Phonebook.............................. 57
Using the Message Service (SMS).................................... 58
Call Waiting .................................................................. 58
Making a Multi-party Call................................................ 59
Using the Menus .................................................. 62
Accessing a Menu Function by Scrolling ............................ 62
Accessing a Menu Function by Using Its Shortcut ............... 64
List of Menu Functions.................................................... 65
Messages ............................................................. 71
Inbox (Menu 1.1) ............................................................. 71
Outbox (Menu 1.2)........................................................... 73
Write New (Menu 1.3) ...................................................... 74
Templates (Menu 1.4) ...................................................... 76
Settings (Menu 1.5).......................................................... 78
My Objects (Menu 1.6) ..................................................... 79
Memory Status (Menu 1.7) ............................................... 81
Voice Mail (Menu 1.8)....................................................... 82
Broadcast (Menu 1.9)....................................................... 83
2
Contents
Sound Settings..................................................... 88
Ring Tone (Menu 3.1)....................................................... 88
Extra Tones (Menu 3.9) .................................................... 92
Phone Settings..................................................... 93
My Settings (Menu 4.1) .................................................... 93
Greeting Message (Menu 4.2) ........................................... 95
Own Number (Menu 4.3) .................................................. 95
Language (Menu 4.4) ....................................................... 96
Security (Menu 4.5).......................................................... 96
Display Settings (Menu 4.6)........................................... 100
Extra Settings (Menu 4.7)............................................... 102
Short Cut (Menu 4.8) ..................................................... 103
Reset Settings (Menu 4.9) .............................................. 103
Organizer........................................................... 105
Calendar (Menu 5.1)....................................................... 105
To Do List (Menu 5.2)..................................................... 109
Time & Date (Menu 5.3) ................................................. 113
Alarm (Menu 5.4)........................................................... 114
Calculator (Menu 5.5)..................................................... 116
Currency Exchange (Menu 5.6) ....................................... 117
3
Contents
Call Barring (Menu 6.2) .................................................. 120
Solving Problems ............................................... 138
Access Codes ..................................................... 141
Phone Password .......................................................... 142
PIN............................................................................ 142
PUK........................................................................... 143
PIN2.......................................................................... 143
PUK2 ......................................................................... 144
Health and Safety Information........................... 145
Exposure to Radio Frequency (RF) Signals ...................... 145
For Body Operation...................................................... 147
Precautions When Using Batteries.................................. 148
Road Safety................................................................ 149
Operating Environment ................................................ 151
Electronic Devices........................................................ 152
Potentially Explosive Environments ................................ 154
Emergency Calls.......................................................... 154
Other Important Safety Information............................... 155
Care and Maintenance.................................................. 156
Acknowledging Special Precautions and
the FCC and Industry Canada Notice .............................. 158
4
Contents
Appendix A: Certification Information (SAR) ..... 160
Appendix B: Guide to Safe
and Responsible Wireless Phone Use ................. 162
Appendix C: Consumer Update
on Wireless Phones............................................ 167
Glossary............................................................. 181
Index ................................................................. 187
5
Contents
6
Your Phone
Phone Layout
The following illustrations show the main elements of your
phone:
Earpiece
Folder
Display
Navigation (Up/
Down/Left/Right)
keys
Volume/menu
browse keys
Soft key (left)
Soft key (right)
WAP Browser
key
Power on/off /
menu exit key
Dial/menu
confirmation key
Cancel/
correction key
Alphanumeric
keys
Special
function keys
Microphone
8
Your Phone
Antenna
Service light
Key(s)
Description
In Menu mode, scroll through the
menus and Phonebook.
In Idle mode, allows you to access your
favorite menus directly. For more
information about shortcuts, see
page 103.
In Menu mode, the Left key returns to
the previous menu level and the Right
key selects the current menu.
When entering text, move the cursor
left and right respectively.
In Idle mode, allows you to access your
favorite menus directly. For more
information about shortcuts, see
page 103.
9
Your Phone
Key(s)
Description (continued)
Perform the functions indicated by the
text above them, on the bottom line of
the display.
(soft keys)
In Idle mode, launches the WAP
(Wireless Application Protocol) browser.
Makes or answers a call.
When held down in Idle mode, recalls
the last number dialed or received.
In Menu mode, selects a menu function
or stores information that you have
entered, such as a name in the phone
or SIM memory.
Deletes characters from the display.
In Menu mode, returns to the previous
menu level.
Ends a call. Also switches the phone on
and off when held down.
In Menu mode, cancels your input and
returns to Idle mode.
When held down in Idle mode, accesses
your voice mail.
10
Your Phone
Key(s)
Description (continued)
Enter numbers, letters and some special
characters.
Enter special characters.
Perform various functions.
(on the side of the phone)
During a call, adjust the earpiece
volume.
In Idle mode, adjust the keypad tone
volume.
In Menu mode, scroll through the
menus and Phonebook.
11
Your Phone
Display
Display Layout
The display has three areas:
Icons
Text and
graphic area
Soft key
indicators
Menu
Name
Area
Description
First line
Displays various icons. See
page 13.
Middle lines
Displays messages, instructions,
and any information that you
enter, such as the number you are
dialing.
Last line
Shows the functions currently
assigned to the two soft keys.
12
Your Phone
Icons
Icon Description
Shows the received signal strength. The
greater the number of bars, the better
the signal.
If this icon is gray, you are outside your
network area and are restricted to
emergency calls only.
Appears when you are connected to the
GPRS network.
Appears when a call is in progress.
Appears when you are out of your home
area and have logged on a different
network; for example, when traveling on
other countries.
Appears when you set an alarm to ring at
a specified time.
Appears when you are entering text to
indicate the current text input mode.
Appears when a new text message is
received.
Appears when a new voice mail message
is received.
13
Your Phone
Icon Description
Appears when Mute mode is active.
Appears when Silent mode is active or
you set the Alert Type menu (Menu
3.3), so that the phone vibrates when
you receive a call. For further details, see
page 30 and page 89 respectively.
Shows the level of your battery. The
more bars you see, the more power you
have left.
Backlight
A backlight illuminates the display and the keypad. When
you press any key or open the folder, the backlight turns
on. It turns off when no keys are pressed within a given
period of time, depending on your setting in the Back
Light menu (Menu 4.6.2). After one minute, the display
turns off to conserve your battery power.
To specify the length of time the backlight is active, set the
Back Light menu (Menu 4.6.2). See page 100 for further
details.
You can also set the phone to use the backlight only during
a specified period of time, in the Auto Light menu (Menu
4.6.3). See page 101 for further details.
14
Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided
with a plug-in SIM card loaded with your subscription
details, such as your PIN, any optional services available
and many others.
Important! The plug-in SIM card and its contacts can be
easily damaged by scratches or bending, so
be careful when handling, inserting or
removing the card.
Keep all SIM cards out of the reach of small
children.
1. If necessary, switch off the phone by holding down the
key until the power-off image displays.
2. Remove the battery. To do so:
✑
Press and hold the battery lock above the battery
upward toward the top of the phone.
16
Getting Started
✑Lift the battery away, as shown.
✑
✑
3. Slide the SIM card into the SIM card socket so that it
locks the card into place. Make sure the gold contacts of
the card face into the phone.
17
Getting Started
5. Press the battery until it clicks into place. Make sure
that the battery is properly installed before switching
the phone on.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A
travel adapter comes with your phone for charging the
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your
phone for the first time. A discharged battery is fully
recharged in approximately 200 minutes.
19
Getting Started
1. With the battery in position on the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone by
pressing the gray tabs on both sides of the connector
and pulling the connector out.
✑
✑
✑
Note: You must unplug the adapter before you remove the
battery from the phone during charging; otherwise, the
phone could be damaged.
20
Getting Started
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, you hear a warning tone and a message
repeats at regular intervals on the display. When this
happens, your phone turns off the backlight to conserve
the remaining battery power.
When the battery level gets too low, the phone
automatically turns off.
Switching the Phone On/Off
1. Open the folder.
2. Press and hold the
on.
key until the phone switches
3. If the phone asks you to enter the phone password,
enter the password and press the OK soft key. The
phone password is factory set to “00000000.” For
further details, see page 142.
21
Getting Started
4. If the phone asks for a PIN, enter the PIN and press the
OK soft key. For further details, see page 142.
The phone searches for your network and after finding
it, the idle screen, illustrated below, appears on the
display. Now, you can make or receive a call.
Service Provider
05:17 AM
Sat Oct 02
Menu
Name
Note: The display language is preset to English at the factory.
To change the language, use the Language menu
(Menu 4.4). For further details, see page 96.
5. When you wish to switch the phone off, press and hold
the key until the power-off image displays.
22
Call Functions
Making a Call
When the idle screen displays, enter the area code and
phone number, and press the key.
Note: When you activate the Auto Redial option in the
Extra Settings menu (Menu 4.7), the phone
automatically redials up to ten times when the person
does not answer the call or is already on the phone.
See page 102 for further details.
Making an International Call
1. Press and hold the
key.
The character appears.
+
2. Enter the country code, area code, and phone number
and press the key.
23
Call Functions
Correcting the Number
To clear
Press the
the last digit
displayed
key
any other digit Left or Right key until the cursor
in the number
is immediately to the right of the
digit to be cleared. Press the
key. You can also insert a missing
digit simply by pressing the
appropriate key.
the whole
display
key and hold it for more than
one second.
Ending a Call
When you want to finish your call, briefly press the
key.
24
Call Functions
Redialing the Last Number
The phone stores the numbers you dialed, received or
missed if the caller is identified. See “Call Records” on
page 85 for further details.
To recall any of these numbers:
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the
key to display a list of the last numbers in
the order you made or received.
3. Use the Up and Down keys to scroll through the
numbers until the number you want highlights.
4.
T
o
Press the
dial the number
edit the number
key.
Options soft key and
select Edit. Then change
the number, referring to
“Correcting the Number”
on page 24.
delete the number Options soft key and
select Delete
.
delete all of the
numbers
Options soft key and
select Delete All
.
25
Call Functions
Making a Call from Phonebook
You can store frequently phone numbers that you use
regularly in the SIM card or the phone’s memory, which are
collectively called Phonebook. Simply select a name to
recall the associated number. For further details about the
Phonebook features, see page 34.
Adjusting the Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the keypad tone volume
using these keys.
26
Call Functions
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call animation.
When the caller can be identified, the caller’s phone
number, or name if stored in your Phonebook, displays.
1. If necessary, open the folder. Press the
key or the
Accept soft key to answer the incoming call.
If the Anykey Answer option in the Extra Settings
menu (Menu 4.7) is activated, you can press any key
to answer a call except for the
soft key. See page 102.
key and the Reject
If the Open to Answer option in the Extra Settings
menu (Menu 4.7) is activated, you can answer the call
simply by opening the folder. See page 102.
Note: To reject an incoming call, press and hold the
Volume keys on the left side of the phone before
opening the folder, or press the Reject soft key or
key.
2. End the call by closing the folder or pressing the
key.
Note: You can answer a call while using the Phonebook or
menu features.
27
Call Functions
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you missed displays on the idle screen
immediately after a call is missed.
To view the missed call immediately:
1. If the phone is closed, open the folder.
2. Press the View soft key.
The number corresponding to the most recent missed
call displays, if available.
3. To
scroll through the
Press the
Up or Down key.
missed calls
call the number
displayed
key.
edit or delete a missed
call number
Select soft key. See
below.
Editing a Missed Call Number
Note: When the number corresponding to the missed call is
not available, the Edit Number option does not
display.
28
Call Functions
1. Press the Options soft key.
2. Press the Up or Down key to highlight the Edit Number
option.
3. Press the Select soft key.
4. Change the number.
5. To
call the number
store the number
Press the
key.
Save soft key and enter
the name and location.
For further details, see
page 34.
Deleting a Missed Call
1. Press the Options soft key.
2. If necessary, press the Up or Down key to highlight the
Delete option.
3. Press the Select soft key.
You can press the
Call feature.
key at any time to exit the Missed
Note: You can access the Missed Call feature at any time by
selecting the Missed Calls menu (Menu 2.1). For
further details, see page 85.
29
Call Functions
Quickly Switching to Silent Mode
Silent mode is convenient when you wish to stop the phone
from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode” message and the Vibration icon ( ) display.
In Silent mode, your phone changes the sound settings as
follows:
Option
New Setting
Alert Type (Menu 3.3
)
Vibration
Off
Keypad Tone (Menu 3.4
)
Message Tone (Menu 3.5
)
Light Only
Off
Folder Tone (Menu 3.6
)
Power Off tone
Off
Extra Tones (Menu 3.8
)
Off
To exit and reactivate the previous sound settings, press
and hold the key again until “Exit Silent Mode” appears.
The Vibration icon ( ) no longer displays.
Note: When you turn the phone off, Silent mode is
automatically deactivated.
30
Selecting Functions and
Options
Your phone offers a set of functions that allow you to
customize your phone. These functions are arranged in
menus and sub-menus, accessed using the two soft keys
marked
and
. Each menu and sub-menu allows you
to view and alter the settings of a particular function.
The roles of the soft keys vary according to the function
you are currently using; the label on the bottom line of the
display just above each key indicates its current role.
31
Selecting Functions and Options
Example:
Service Provider
05:17 AM
Sat Oct 02
Menu
Name
Press the left soft
key to access Menu
mode.
Press the right soft
key to access the
Phonebook feature.
To view the various functions and options available and to
select the one you want:
32
Selecting Functions and Options
1. Press the appropriate soft key.
2.. To
select the:
Press the
Select soft key or
• function displayed
• option highlighted
the Right key.
view the next function
or highlight the next
option on a list
Down key or
on the left side of the
phone.
key
move back to the
previous function or
option on a list
Up key or
the left side of the
phone.
key on
move back up one level Left key,
soft key
in the structure
or
key.
exit the structure
without changing the
settings
key.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key.
Note: When you access a list of options, your phone
highlights the current option. If, however, there are
only two options, such as On
/
Off or Enable
/
Disable
,
your phone highlights the option that is not currently
active so that you can select it directly.
33
Phonebook
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Storing a Number with a Name
There are two ways to store a number:
• Using the Save soft key in Idle mode
• Using the New Entry option in the Phonebook menu
Storing a Number in Idle Mode
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the number in
Phonebook.
1. Enter the number you want to store.
Note: If you make a mistake while entering a number,
correct it using the
page 24.
key. For further details, see
2. To save the number, press the Save soft key.
34
Phonebook
3. Select an icon to identify the category of the number to
be stored. Three categories are available:
•
•
•
: Mobile phone number
: Office number
: Home number
To select the category, press the Left or Right key and
press the Select soft key.
4. Enter a name and press the OK soft key.
The maximum length you can enter for a name depends
on your SIM card. For information about how to enter
characters, see page 45.
5. Press the right soft key, labeled To Card or To Phone
to switch between the phone’s and card’s memories.
Note: When you change phones, any numbers stored in
your SIM card memory are automatically available
with the new phone, whereas any numbers stored
in the phone’s memory must be reentered.
6. If you do not want to save the number and name in the
suggested location, press the
key to clear the
location number and enter your preferred location by
pressing the number keys.
7. Press the OK soft key to store the name and number.
35
Phonebook
After storing, the phone displays the Phonebook entry
or name just created.
8. To
Press the
use the entry options
Options soft key. For
further details, see
page 37.
return to the idle screen
key.
Storing a Number Using the Phonebook Menu
1. When the idle screen displays, press the Name soft
key.
2. Scroll to New Entry by pressing the Up or Down key
and press the Select soft key.
3. Select an icon to identify the category of the number to
be stored by pressing the Left or Right key, and press
the Select soft key.
Note: The E-mail icon (
) is available in this step. It
allows you to save an E-mail address instead of a
phone number.
4. Enter a name and press the OK soft key.
The maximum length of a name depends on your SIM
card. For information about how to enter characters,
see page 45.
5. Enter a number or address you want to store and press
the Save soft key.
36
Phonebook
6. Continue the procedure from step 5 on page 35 to store
the number.
Using Phonebook Entry Options
While accessing any Phonebook entry, press the Options
soft key to use the options for the entry.
To
Press the
select the
Select soft key or the Right
highlighted option
key.
highlight a different Up or Down key until the
option option you want highlights.
The following options are available:
Paste: allows you to paste the number into the normal
dialing mode. Use this option to dial a number similar to
one in Phonebook, such as a different extension in the
same office.
Use the
page 24 for further details. When you are ready to dial,
press the key.
key to change the number as required; see
Edit: allows you to edit the name and/or number.
Erase: allows you to erase the name and number from
Phonebook. You are asked to confirm that you wish to
erase the name and number by pressing the Yes soft key.
37
Phonebook
Copy: allows you to copy the number to another location.
You can select the memory and the location number.
Caller Group: allows you to organize your Phonebook
entry in caller groups so that the phone alerts you in a
specific way when a person from one of your groups calls
you. Select one of the ten groups available.
To remove an entry from a group, select the No Group
option.
For more information about how to change caller group
properties, see page 41.
Add Entry: allows you to add a new number to the
currently selected name.
Searching for a Number in Phonebook
After storing numbers in Phonebook, you can search for
them in two ways; by name and by caller group.
Searching for a Number by Name
1. When the idle screen displays, press the Name soft
key.
2. Press the Select soft key when Search highlights. You
are asked to enter a name.
3. Enter the first few letters of the name that you wish to
find.
38
Phonebook
The Phonebook entries are listed, starting with the first
entry matching your input.
4. To
Press the
view the highlighted
entry
View soft key.
select a different
entry
Up or Down key until
the entry you want
highlights.
look for a name
starting with a
different letter
key labeled with the
letter you want.
5. Once you have found the entry, press the
key to
dial the number, or press the Options soft key to
access the Phonebook entry options; for further details,
see page 37.
39
Phonebook
Searching for a Number by Caller Group
1. When the idle screen displays, press the Name soft
key.
2. Scroll to Group Search by pressing the Up or Down
key and press the Select soft key. You are asked to
enter a group name.
3. Enter the first few letters of the group name that you
wish to find.
The caller groups are listed, starting with the first group
matching your input.
4. Scroll to the group you want by pressing the Up or
Down key and press the View soft key.
The Phonebook entries in the caller group are listed.
5. To
view the
Press the
View soft key.
highlighted entry
select a different
entry
Up or Down key until the
entry you want highlights.
6. Once you have found the entry, press the
key to
dial the number, or press the Options soft key to
access the Phonebook entry options; for further details,
see page 37.
40
Phonebook
Editing a Caller Group
1. When the idle screen displays, press the Name soft
key.
2. Scroll to Group Edit by pressing the Up or Down key
and press the Select soft key.
3. Scroll through the group list by pressing the Up or Down
key.
4. When the group you want highlights, press the Options
soft key.
5. Select each option and change the settings, as required.
The following options are available:
•
•
•
•
Call Ring Tone: allows you to set the ring tone to be
used when you receive a voice call from a person in
the group.
SMS Tone: allows you to set the ring tone to be used
when you receive a text message from a person in the
group.
Graphic: allows you to set the graphic icon to be
displayed when you receive a voice call from a person
in the group.
Group Name: allows you to assign a name to the
group. For further details about how to enter
characters, see page 45.
6. When you are finished, press the
or
key.
41
Phonebook
Speed-dialing
Once you have stored phone numbers in the SIM card, you
can set up to eight speed-dial entries and then dial them
easily whenever you want, simply by pressing the
associated number key.
Setting Up Speed-dial Entries
1. When the idle screen displays, press the Name soft
key.
2. Scroll to Speed Dial by pressing the Up or Down key
and press the Select soft key.
3. Select the key to which you wish to assign the speed-
dialing number, from the
to
keys, and press
the OK soft key.
Note: Memory location 1 is reserved for your Voice Mail
server number.
If you have already assigned a number to the key, the
Options soft key replaces the OK soft key. Go to step 6.
4. Select a Phonebook entry from the list and press the
View soft key.
5. Select a number if the entry has more than one number,
by pressing the Up or Down key and press the Select
soft key.
6. Once you have assigned a number to the selected key,
you can use the following options by pressing the
Options soft key:
42
Phonebook
•
•
•
•
Change: allows you to assign a different number to
the key.
Erase: allows you to clear the setting so that no
number is assigned to the key.
Erase All: allows you to clear the settings for all keys
so that no numbers are assigned to any of the keys.
Number: allows you to view the number assigned to
the key.
7. When you are finished, press the
or
key.
to
Speed-dialing from Phonebook
To speed-dial the numbers assigned to keys
press and hold the appropriate key.
,
43
Phonebook
Checking the Memory Status
You can check how many names and numbers are stored in
Phonebook; SIM card and phone memories. You can also
see the capacity of both memories.
1. When the idle screen displays, press the Name soft
key.
2. Select the Memory Status option.
3. Press the Up or Down key to view the number of
existing and remaining entries in the card and phone’s
memory.
4. When you are finished, press the
or
key.
44
Entering Text
When using your phone, you will often need to enter text,
such as when storing a name in Phonebook, creating your
personal greeting or scheduling events on your calendar.
You can enter alphanumeric characters by using your
phone’s keypad.
Your phone has the following text input modes:
• T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more
than one letter; for example, when you press the
key once, J, K or L displays. The T9 mode automatically
compares your keystrokes with an internal linguistic
dictionary to determine the correct word, thus requiring
far fewer keystrokes than the traditional upper/lower-
case character modes.
• Upper/lower-case character modes
These modes allow you to enter letters by pressing the
key labeled with the letter you want to enter once, twice,
three or four times until the letter displays.
45
Entering Text
• Symbol mode
This mode allows you to enter symbols, such as
punctuation marks.
• Number mode
This mode allows you to enter numbers.
Changing the Text Input Mode
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message
Text input mode
indicator
Options
918
46
Entering Text
To select
Press the
until
soft key
T9 mode
displays. See page 47.
displays. See page 49.
Upper-case character
mode
Lower-case character
mode
displays. See page 49.
Number mode
Symbol mode
displays. See page 51.
displays. See page 51.
Using T9 Mode
T9 is a predictive text input mode that allows you to key in
any character using single keystrokes. This text input mode
is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the
to
keys. Press each key only once
for each letter.
Example: To enter “Hello” in T9 mode, press the
and keys.
,
,
,
The word you are typing appears on the display. It may
change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
47
Entering Text
3. When the word displays correctly, go to
step 4.
If not, press the
, Up or Down key to display
alternative word choices for the keys that you have
pressed.
Example: Both “Of” and “Me” have the
and
keys. The phone displays the most commonly
used choice first.
4. Put a space by pressing the
the next word.
key and start entering
• To type words not found in T9 mode, change the text
input mode to the upper/lower-case character input
mode.
• To enter full stops, hyphens or apostrophes, press the
key. T9 mode applies grammar rules to ensure that
the correct punctuation is used.
Example: The
key is used twice to display two
punctuation marks:
L
e
t
’
s
e
a
t
.
• To shift the case in T9 mode, use the
two cases: Lower Case (
key. There are
).
) and Capital Lock (
• You can move the cursor by using the Left and Right
keys. To delete letters, press the key. Press and hold
the key to clear the display.
48
Entering Text
Using the Upper/Lower-Case
Character Mode
Use the
to
keys to enter your text.
1. Press the key labeled with the letter you want:
- Once for the first letter
- Twice for the second letter
- And so on
2. Select the other letters in the same way.
Note: The cursor moves to the right when you press a
different key. When entering the same letter twice or a
different letter on the same key, just wait for a few
seconds for the cursor to move to the right
automatically, and then select the next letter.
49
Entering Text
See the table below for more information about the
characters available:
Characters in the Order Displayed
Key
Lower Case
Upper Case
Space
Space
• To insert a space, press the
key.
• You can move the cursor by using the Left and Right
keys. To delete letters, press the key. Press and hold
the key to clear the display.
50
Entering Text
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols into a text
message.
Use the Navigation keys to scroll to a symbol and then
press the OK soft key to insert the highlighted symbol into
your message
51
Entering Text
52
Options During a Call
Your phone provides a number of control functions that you
can use during a call.
Putting a Call on Hold
You can place the current call on hold whenever you want.
You can make another call while you have a call in progress
if your network supports this service.
To place a call on hold, simply press the Hold soft key. You
can reactivate the call whenever you want, by pressing the
Unhold soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it
up in Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or
1. Put the current call on hold by pressing the Hold soft
key.
2. Make the second call in the normal way.
To switch between the two calls, simply press the Swap
soft key.
The current call is placed on hold and the call on hold is
reactivated so that you can continue conversing with the
other party.
53
Options During a Call
When you want to finish, end each call normally by
pressing the
key.
Switching the Microphone Off (Mute)
You can temporarily switch your phone’s microphone off, so
that the other party cannot hear you.
Example: You wish to say something to another person in
the room but do not want the person on the
phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the Mute
option.
3. Press the OK soft key.
The other person can no longer hear you.
54
Options During a Call
To switch the microphone back on:
1. Press the Options soft key.
2. If necessary, press the Down key to highlight the
Unmute option.
3. Press the OK soft key.
The other person can hear you again.
Muting/Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmit the key tones. It allows you to press keys without
hearing annoying key tones during a call.
Note: To communicate with answering machines or
computerized telephone systems, the Send keys
option must be selected.
55
Options During a Call
Sending DTMF Tones
You can send the DTMF (dual tone multi-frequency) tones
when entering a number.
This option is helpful for entering a password or account
number when you call an automated system, like a banking
service.
To send the DTMF tones:
1. When you are connected to the teleservice system,
press the Options soft key.
2. Press the Down key to highlight the Send DTMF option.
3. Press the OK soft key.
4. Enter the number you want to send and press the OK
soft key.
The tones are sent.
56
Options During a Call
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option.
3. Press the OK soft key.
The Phonebook entries are listed.
4. Enter the name that you wish to find.
If you enter the first few letters of the name, the
Phonebook entries are listed, starting with the first
entry matching your input.
5. To view the highlighted entry, press the View soft key.
For further details about the Phonebook feature, see
page 34.
57
Options During a Call
Using the Message Service (SMS)
If you receive an SMS (Short Message Service) message
during a call, the Message icon ( ) flashes on the display.
The SMS Service option enables you to read the message
or send a new message.
For further details about the Message feature, see page 71.
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call Waiting menu (Menu 6.3) to
Activate; see page 120. You are notified of an incoming
call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Swap soft
key.
3. To end a call on hold, press the Options soft key and
select the End Held Call option.
To end the current call, press the
key.
58
Options During a Call
Making a Multi-party Call
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service, contact
your service provider.
Setting up the Multi-party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key and select the Join option. Press
the OK soft key.
4. To add a new person to the multi-party call, call the
person in the normal way and then press the Options
soft key. Select the Conference option and press the
OK soft key.
You can add incoming callers by answering the call and
pressing the Options soft key, and selecting Conference
.
Repeat as required.
59
Options During a Call
Having a Private Conversation With One
Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key or the
key.
3. When the Private option highlights, press the OK soft
key.
Now you can talk privately to that person. The other
participants can continue to converse with each other.
4. To return to the multi-party call, press the Options soft
key and select Conference. Press the OK soft key.
All of the multi-party call participants can now hear
each other.
60
Options During a Call
Dropping One Participant
1. Press the Options soft key and choose the Select one
option. Press the OK soft key.
The list of call participants appears.
2. Highlight a person by pressing the Up or Down key, and
press the Select soft key or the
key.
3. Press the Down key to select the Remove option and
press the OK soft key.
The call ends with that participant, but you can continue
to talk to the other participants.
4. When you want to end the multi-party call, close the
folder or press the
key.
61
Using the Menus
The phone offers a range of functions that allow you to
tailor it to your needs. These functions are arranged in
menus and sub-menus.
The menus and sub-menus can be accessed by scrolling
using the Navigation keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Up and Down keys to reach a main
menu, Phone Settings for example. Press the Select
soft key or the Right key to enter the menu.
62
Using the Menus
3. If the menu contains sub-menus, Language for
example, you can access them by scrolling using the Up
and Down keys and pressing the Select soft key.
If the menu that you have selected contains further
options, repeat this step.
4. To
Press the
scroll through the
menus
Up or Down keys or use
the
and
keys.
confirm the
Select soft key or the
chosen setting
Right key.
return to the
soft key or the Left
previous menu level key.
exit the menu
without changing
the settings
key.
63
Using the Menus
Accessing a Menu Function by Using Its
Shortcut
The menu items, such as menu, sub-menus and options,
are numbered and can be accessed quickly by using their
shortcut numbers. The shortcut number is shown at the
bottom right next to the
soft key on the display. Simply
press the Menu soft key and enter the number of the
menu you want.
Note: The numbers assigned to each menu are indicated on
the list on the next page. They may not match the
menu number on the phone, depending on the services
supported by your SIM card.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
key for Phone Settings
.
key for Language
.
The languages available display.
64
Using the Menus
List of Menu Functions
The following list shows the menu structure available and
indicates the number assigned to each option and the page
where you can find a description of each feature.
Note: If you use a SIM AT card that provides additional
services, the SIM AT menu displays when you press
the Menu soft key to enter Menu mode. For further
details, see your SIM card instructions.
1. Messages (see page 71)
1.1 Inbox
1.2 Outbox
1.3 Write New
1.4 Templates
1.5 Settings
1.5.1 Setting 1*
*
1.5.2 Setting 2
1.5.3 Common Setting
1.6 My Objects
1.6.1 My EMS Melody
1.6.2 My EMS Picture
1.6.3 My EMS Animation
1.6.4 Delete All
1.7 Memory Status
1.7.1 SIM Memory
1.7.2 PHONE Memory
1.7.3 CB Memory
1.7.4 Delete All
1.8 Voice Mail
1.8.1 Connect to Voice Mail
1.8.2 Voice Mail Number
1.9 Broadcast
* Shows only if supported by your SIM card.
65
Using the Menus
1.9.1 Read
1.9.2 Receive
1.9.3 Channel List
1.9.4 Language
2. Call Records (see page 85)
2.1 Missed Calls
2.2 Incoming Calls
2.3 Outgoing Calls
2.4 Delete All
2.4.1 Missed Calls
2.4.2 Incoming Calls
2.4.3 Outgoing Calls
2.5 Call Time
2.5.1 Last Call Time
2.5.2 Total Outgoing
2.5.3 Total Incoming
2.5.4 Reset Timers
3. Sound Settings (see page 88)
3.1 Ring Tone
3.2 Ring Volume
3.3 More Ringtones
3.4 Alert Type
3.5 Keypad Tone
3.6 Message Tone
3.6.1 SMS Tone
3.6.2 SMS-CB Tone
3.7 Folder Tone
3.8 Power On/Off
3.9 Extra Tones
66
Using the Menus
4. Phone Settings (see page 93)
4.1 My Settings
4.1.1 Wallpaper
4.1.2 Menu Style
4.1.3 More Graphics
4.2 Greeting Message
4.3 Own Number
4.4 Language
4.5 Security
4.5.1 PIN Check
4.5.2 Change PIN
4.5.3 Phone Lock
4.5.4 Change Password
4.5.5 SIM Lock
4.5.6 FDN Mode*
4.5.7 Change PIN2*
4.6 Display Settings
4.6.1 Contrast
4.6.2 Back Light
4.6.3 Auto Light
4.6.4 Service Light
4.6.5 Graphic Logo
4.7 Extra Settings
4.8 Short Cut
4.8.1 Key Up
4.8.2 Key Down
4.8.3 Key Right
4.8.4 Key Left
4.9 Reset Settings
* Shows only if supported by your SIM card.
67
Using the Menus
5. Organizer (see page 105)
5.1 Calendar
5.2 To Do List
5.3 Time & Date
5.3.1 Set Time
5.3.2 Set Date
5.3.3 World Time
5.3.4 Time Format
5.4 Alarm
5.4.1 Once Alarm
5.4.2 Daily Alarm
5.4.3 Morning Call
5.4.4 Remove Alarm
5.4.5 Autopower
5.5 Calculator
5.6 Currency Exchange
68
Using the Menus
6. Network Services (see page 118)
6.1 Call Forwarding
6.1.1 Forward Always
6.1.2 Busy
6.1.3 No Reply
6.1.4 Unreachable
6.1.5 Cancel All
6.2 Call Barring
6.2.1 All Outgoing
6.2.2 International
6.2.3 International Except to Home
6.2.4 All Incoming
6.2.5 Incoming While Abroad
6.2.6 Cancel All
6.2.7 Change Barring Password
6.3 Call Waiting
6.4 Network Selection
6.5 Caller ID
6.6 Closed User Group
6.6.1 Index List
6.6.2 Outside Access
6.6.3 Default Group
6.6.4 Deactivate*
* Shows only when a Closed User Group is activated.
69
Using the Menus
7. Funbox (see page 127)
7.1 Games
7.2 More Games
7.3 WAP Browser
7.3.1 Home
7.3.2 Favorite
7.3.3 http://
7.3.4 Settings
7.3.5 Clear Cache
7.3.6 Push Message
7.4 Downloads
7.4.1 Games & More
7.4.2 Sounds
7.4.3 Pictures
7.4.4 DNS Setting
70
Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other GSM mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon (
) appears, you have received
new text messages. When the memory is full, an error
message displays and you cannot receive any new
messages. Use the Delete option in each message box to
delete obsolete messages.
Inbox (Menu 1.1)
This message box is used to store the messages that you
have received.
When you enter this menu, the list of messages in the box
displays with the senders’ phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous or next message, press the
or
key.
71
Messages
While reading a message, you can choose the following
options by pressing the Options soft key:
Delete: allows you to delete the message.
Forward: allows you to resend the message. For further
information about how to send a message, see page 74.
Reply: allows you to reply to the sender by sending a text
message.
Call Back: allows you to call the sender back.
Save Address: allows you to extract the sender’s number
and URL, e-mail addresses or phone numbers from the
message text, so that you can save them in your phone’s
memory.
Move: allows you to move the message to another
memory location, from the SIM card to the phone’s
memory or vice versa.
Select Objects: allows you to save media items, such as
sounds or images, from the message into your phone’s
memory. You can then use the items when writing a
message. For details, see page 75.
72
Messages
Outbox (Menu 1.2)
This message box is used to store the messages that you
have already sent or will send.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. Select a message from the list and press the View soft
key to read the message contents.
2. To scroll through the contents, press the Up or Down
key.
3. To scroll to the previous or next message, press the
or
key.
While reading a message, you can choose the following
options by pressing the Options soft key:
Delete: allows you to delete the message.
Send: allows you to resend the message. For further
information about how to send a message, see page 74.
Save Address: allows you to extract the destination
number and URL, e-mail addresses or phone numbers from
the message text, so that you can save them in your
phone’s memory.
Move: allows you to move the message to another
memory location, from the SIM card to the phone’s
memory or vice versa.
Select Objects: allows you to save the media items, such
as sounds or images, from the message into your phone’s
73
Messages
memory. You can then use the items when writing a
message. For details, see page 75.
Write New (Menu 1.3)
In this menu, you can write and send a text message.
Note: When you add media items to the message, the
number of characters you can enter decreases.
Creating a Simple Text Message
1. Create your message.
Note: For more information about entering characters, see
page 45.
2. When you finish entering your message, press the
Options soft key. The following options are available:
•
•
Send: allows you to send the message. The message
is deleted after sending.
Save and Send: allows you to save a copy of the
message and then send the message. You can read
the message in your Outbox.
•
Save: allows you to save the message so that it can
be sent later. You can read the message in your
Outbox.
• For more information about the Text Formatting
,
Add Objects Add Templates Add Phonebook,
,
,
Add Bookmark and Language options, see page 75.
3. Select Send or Save and Send, and press the Select
soft key.
74
Messages
If you only want to save the message, select Save
.
After saving the message, the phone returns to the
Messages menu.
4. If you select a save option, choose the memory where
you want to save the message and press the OK soft
key.
5. Enter a destination number and press the OK soft key.
The message is sent.
Note: When the phone fails to send the message, it asks you
if you want to retry. Press the OK soft key to confirm.
Otherwise, press the Exit soft key to return to the
message screen.
Creating a Message Using the Options
1. Create your message.
2. Press the Options soft key.
3. Select one of the following options by using the Up and
Down keys and pressing the Select soft key.
•
Text Formatting: allows you to format the style of
the text.
For the Size attribute, Normal
,
Large and Small
sizes are available. For the Underline and
Strikethrough attributes, select On or Off
.
The attributes can be combined.
•
Add Objects: allows you to add a sound, melody,
picture or animated image to your message. Select
the category of the item to be added. In each
category, you can select from the various factory-set
75
Messages
items or choose an item received from other sources,
such as the Internet or other phones.
•
Add Templates: allows you to apply one of the
preset message templates to the text. Select one of
the five messages stored in the Templates menu
(Menu 1.4). For further details, see page 76.
•
•
Add Phonebook: allows you to add a Phonebook
entry to your message. Select one from the list.
Add Bookmark: allows you to add a web page’s
address stored in your Favorite list (Menu 7.2.2).
Select one from the list.
•
Language: allows you to change the language to be
used in T9 input mode. Select the language to be
used.
4. Complete the message, and send or save it by following
the procedure from step 2 on page 74.
Templates (Menu 1.4)
Using this menu, you can preset messages that you use
most frequently.
Select an empty location or the message template you
want and press the Options soft key.
The following options are available:
Edit: allows you to write a new message or edit the
message.
Note: For further details about how to enter characters, see
page 45.
76
Messages
Send Message: allows you to retrieve the message. Once
you have completed the message, you can send, save and
send, or simply save it. For details about how to send a
message, see page 74.
Delete: allows you to delete the message. You are asked
to confirm the deletion by pressing the Yes soft key.
77
Messages
Settings (Menu 1.5)
In this menu, you can set up default message information.
A setting group is a collection of settings required to send
messages. The number of setting groups available depends
on the capacity of your SIM card.
Note: The last setting you accessed is automatically activated
for sending messages.
Setting x (where
x
is the setting group number): each
group has its own sub-menu.
Service Center: allows you to store or change the number
of your message center, which is required when sending
messages. You must obtain this number from your service
provider.
Default Destination: allows you to store the default
destination number. The number automatically displays on
the Destination screen when you create a message.
Default Type: allows you to set the default message type to
Text Fax, Email or Paging. The network can convert the
,
messages into the selected format.
Default Validity: allows you to set the length of time your
text messages are stored at the message center while
attempts are made to deliver them.
Setting Name: allows you to give a name to the setting
group currently being defined.
Common Setting: The following options are available:
78
Messages
Reply Path: allows the recipient of your message to send
you a reply message using your message center, if your
network supports this service.
Delivery Reports: allows you to activate or deactivate the
report function. When this function is activated, the
network informs you whether or not your message has
been delivered.
Bearer Selection: allows you to choose either GSM or
GPRS, depending on your network.
My Objects (Menu 1.6)
In this menu, you can see the media objects you saved
from messages into your phone’s memory by using the
Select Objects option.
Three categories of items are available:
• My EMS Melody
• My EMS Picture
• My EMS Animation
To delete an item, press the Delete soft key while you are
reviewing it.
You can delete all of the items using the Delete All option
(Menu 1.6.4).
To
Press the
select a category
Up or Down key. To delete all
of your objects, select All
Object
.
79
Messages
To
Press the
place a check
mark
Mark soft key.
remove the check Unmark soft key.
mark
delete the marked Delete soft key.
objects
When a confirming message displays, press the Yes soft
key to confirm.
80
Messages
Memory Status (Menu 1.7)
This menu shows how many messages are currently stored
in the SIM, phone and CB (Cell Broadcast) memories.
You can also delete all of the messages in each message
box using the Delete All option (Menu 1.7.4).
To
Press the
select a message
type
Up or Down key. To delete all
of your messages, select All
Messages
.
place a check
mark
Mark soft key.
remove the check Unmark soft key.
mark
delete the marked Delete soft key.
messages
When a confirming message displays, press the Yes soft
key to confirm.
81
Messages
Voice Mail (Menu 1.8)
This menu provides you with a way of accessing your voice
mailbox, if provided by your network.
The following options are available:
Connect to Voice Mail: before using the Voice Mail
feature, you must enter the voice server number obtained
from your service provider; see Menu 1.8.2. You can then
select this option and press the OK soft key to listen to
your messages.
You can connect to the voice server by pressing and
holding the
key in Idle mode.
Voice Mail Number: allows you to change the voice mail
server number, if necessary.
To
Press the
enter the server number corresponding numeric
keys.
correct a digit
C
key.
move the cursor to the
left/right without
Left or Right key.
clearing the digit
Note: Voice Mail is a network feature. Please contact your
service provider for further details.
82
Messages
Broadcast (Menu 1.9)
This network service allows you to receive text messages
on various topics, such as the weather or traffic. Cell
Broadcasting (CB) messages display as soon as they are
received, provided that:
• the phone is in Idle mode.
• the Receive option is set to Enable
.
• the message channel is currently active on the channel
list.
The following options are available:
Read: lets you view the message. Volatile displays the
messages from the network, but loses its contents as soon
as the phone is switched off. Scroll through the message
using the Up and Down keys. While reading a message,
press the Save soft key to store the message in the
Archive box for later retrieval.
Receive: allows you to enable or disable the reception of
broadcast messages.
Channel List: allows you to indicate the channels from
which you wish to receive cell broadcast messages. The
following options are available:
Select: used to enable or disable channels on the list by
marking or unmarking them respectively.
Add Channel: used to enter the ID and title for a new
channel.
Delete: used to remove a channel from the list.
83
Messages
Edit: used to change the ID and title of an existing channel.
Language: allows you to select your preferred language to
be used when displaying cell broadcast messages.
Please contact your service provider for more information.
84
Call Records
In this menu, you can view the:
• calls you missed, received or dialed.
• length of your calls.
• cost of your calls.
Note: You can access the numbers in the three types of call
records by pressing the
key in Idle mode.
Missed Calls (Menu 2.1)
This menu lets you view the numbers of the last 20
unanswered calls.
The number and name, if available, display together with
the date and time when the call was received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and save it in Phonebook.
You can also dial the number by pressing the
key.
85
Call Records
Incoming Calls (Menu 2.2)
This menu lets you view the last 20 numbers of the calls
you answered.
The number and name, if available, display, together with
the date and time when the call was received.
By pressing the Options soft key, you can:
• delete the call from the list.
• edit the number, if available, and save it in Phonebook.
You can also dial the number by pressing the
key.
Outgoing Calls (Menu 2.3)
This menu lets you view the last 20 numbers you dialed.
The number and name display, together with the date and
time when the call was made.
By pressing the Options soft key, you can:
• delete the number.
• edit the number and save it in Phonebook.
You can also dial the number by pressing the
key.
Delete All (Menu 2.4)
You can delete all of the numbers stored in each call record
category.
86
Call Records
Select a call record using the Up or Down key and press the
Select soft key. When a confirming message appears,
press the Yes soft key.
Call Time (Menu 2.5)
This menu lets you view the timers for calls you made and
received.
Note: The actual time invoiced for calls by your service
provider may vary, depending on network features,
such as rounding-off for billing purposes.
The following options are available:
Last Call Time: length of the last call.
Total Outgoing: total length of all calls you made since
the timer was last reset.
Total Incoming: total length of all calls you received since
the timer was last reset.
Reset Timers: option used to reset the call timers. You
must first enter the phone password and then press the OK
soft key.
Note: The password is preset to “00000000.” To change this
password, see page 142.
87
Sound Settings
You can use the Sound Settings feature to customize
various settings, such as the:
• ring melody, volume and type.
• sounds made when you press a key, receive a message,
open/close the folder or switch your phone on/off.
• alert tone made every minute during a call, when you
make an error or when your call is connected to the
system.
Note: When the phone is in Silent mode (see page 30), you
cannot change the sound settings.
Ring Tone (Menu 3.1)
This menu allows you to select a ring melody.
You can choose between many different melodies. Each
time you select a melody, it plays for a few seconds. If you
have downloaded sounds from the Internet, you can use
them in this menu.
More Ringtones (Menu 3.2)
This option opens the WAP browser to a web site where you
can download additional ringtones.
88
Sound Settings
Ring Volume (Menu 3.3)
This menu allows you to adjust the ring volume to one of
five levels.
Use the Up and Down keys or the Volume keys on the left
side of the phone to increase or decrease the volume.
Alert Type (Menu 3.4)
This menu allows you to specify how you are to be
informed of incoming calls.
The following options are available:
Light Only: the service light flashes the phone neither
rings nor vibrates.
Melody: the phone rings using the ring melody selected in
the Ring Tone menu (Menu 3.1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone first vibrates three times and
then starts ringing.
Keypad Tone (Menu 3.5)
This menu allows you to select the tone that the phone
sounds when you press a key. The options are OFF
,
Cool,
Piano Tone and Beep
,
.
To turn off the sound, select Off
.
89
Sound Settings
Message Tone (Menu 3.6)
This menu allows you to select how the phone informs you
that a new message has been received.
SMS Tone (Menu 3.6.1)
The following options are available for alerting you to new
SMS messages:
Off: the phone does not use the SMS tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS Tones: the phone uses one of several SMS tones.
SMS-CB Tone (Menu 3.6.2)
The following options are available for alerting you to new
cell broadcast (CB) messages:
OFF: the phone does not use the CB tone.
Light Only: the service light flashes.
Vibration: the phone vibrates.
Single Beep: the phone beeps once.
SMS-CB Tones: the phone uses one of several CB tones.
90
Sound Settings
Folder Tone (Menu 3.7)
This menu allows you to select the tone that the phone
sounds when you open or close the folder.
To turn the sound off, select Off
.
Power On/Off (Menu 3.8)
This menu allows you to select the melody that the phone
sounds when it is switched on and off.
To turn the sound off, select Off
.
91
Sound Settings
Extra Tones (Menu 3.9)
You can customize additional tones used for the phone.
To turn a given
tone
Press the
on
ON soft key.
A check mark displays in
front of the option.
off
OFF soft key.
The check mark no longer
displays.
The following options are available:
Error Tone: sets whether or not the phone informs you
when you have make a mistake.
Minute Minder: sets whether or not the phone beeps
every minute during an outgoing call to keep you informed
of the length of your call.
Connect Tone: sets your phone to beep when your call is
connected to the system.
92
Phone Settings
Many different features of your phone can be customized to
suit your preferences. All of these features are accessed in
the Phone Settings menu.
My Settings (Menu 4.1)
You can change the background image and the display
style for Menu mode according to your preference.
Wallpaper (Menu 4.1.1)
This option allows you to change the background image to
be displayed in Idle mode.
To change the background image:
1. Scroll through the list by pressing the Up or Down key.
You have various preset images available. You can also
select the blank background or any downloaded images.
2. Press the Select soft key when the image you want
highlights.
93
Phone Settings
3. When the image displays, press the Select soft key.
The display asks you if you want to display text on the
screen.
4. Press the Yes soft key to display the current date and
time on the wallpaper image.
To display only the image, press the No soft key.
More Graphics (Menu 4.1.2)
This option opens the WAP browser to a web site where you
can download additional graphics.
Menu Style (Menu 4.1.3)
This menu allows you to select the menu display style. You
can choose either Folder Style or Page Style
.
94
Phone Settings
Greeting Message (Menu 4.2)
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
To
Press the
C key and hold it down until
clear the existing
message
the message is cleared.
enter a new
message
appropriate alphanumeric
keys.
change the text
input mode
soft key.
For further details about how to enter characters, see
page 45.
Own Number (Menu 4.3)
This function is a memory aid, which you can use to check
your own phone number if necessary.
95
Phone Settings
Language (Menu 4.4)
You can select a display language. When the language
option is set to Automatic, the language is automatically
selected according to the language of the SIM card used.
Security (Menu 4.5)
The Security feature enables you to restrict the use of your
phone to the people and the types of calls of your choice
Various codes and passwords are used to protect the
features of your phone. They are described in the following
sections. See also pages 142-144.
PIN Check (Menu 4.5.1)
When the PIN Check feature is enabled, you must enter
your PIN each time you switch the phone on. Consequently,
any person who does not have your PIN cannot use your
phone without your approval.
Note: Before disabling the PIN Check feature, you must enter
your PIN.
The following options are available:
Disable: the phone connects directly to the network when
you switch it on.
Enable: you must enter the PIN each time the phone is
switched on.
96
Phone Settings
Change PIN (Menu 4.5.2)
This feature allows you to change your current PIN to a
new one, provided that the PIN Check feature is enabled.
You must enter the current PIN before you can specify a
new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone Lock (Menu 4.5.3)
When the Phone Lock feature is enabled, the phone is
locked and you must enter the 8-digit phone password
each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see the Change Password
menu (Menu 4.5.4).
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
Disable: you are not asked to enter the phone password
when you switch the phone on.
Enable: you are required to enter the phone password
when you switch the phone on.
97
Phone Settings
Change Password (Menu 4.5.4)
The Change Password feature allows you to change your
current phone password to a new one. You must enter the
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
SIM Lock (Menu 4.5.5)
When the SIM Lock feature is enabled, your phone only
works with the current SIM. You must enter the SIM lock
code to use a different SIM card.
Once you have entered the lock code, you are asked to
confirm it by entering it again.
To unlock the SIM, you must enter the SIM lock code.
98
Phone Settings
FDN Mode (Menu 4.5.6)
FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict your outgoing calls to a limited
set of phone numbers.
The following options are available:
Disable: you can phone any number.
Enable: you can only call phone numbers stored in
Phonebook. You must enter your PIN2.
Note: Not all SIM cards have a PIN2. If your SIM card does
not, this menu does not display.
Change PIN2 (Menu 4.5.7)
The Change PIN2 feature allows you to change your current
PIN2 to a new one. You must enter the current PIN2 before
you can specify a new one.
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does
not, this menu does not display.
99
Phone Settings
Display Settings (Menu 4.6)
In this menu, you can change the settings for the display or
backlight.
Contrast (Menu 4.6.1)
This menu allows you to adjust the contrast of the display
screen to see them better in different lighting conditions.
Adjust the contrast using the Up and Down keys or the
Volume keys on the left side of the phone.
Back Light (Menu 4.6.2)
You can select whether or not the phone uses the backlight.
A marginal increase in standby/talk time can be achieved
by turning the backlight off.
Select the length of time for which the backlight is on. The
backlight turns on when you press a key or receive a call or
message and remains on for the specified length of time.
If you do not want to use the backlight, select Off
.
100
Phone Settings
Auto Light (Menu 4.6.3)
Using this feature, you can specify the time for which the
backlight is to be used. This feature helps you to conserve
your battery power.
The following options are available:
Disable: the backlight is used according to the setting in
the Back Light menu (Menu 4.6.2); see page 100.
Enable: the backlight is used only during the specified
period of time. Set the time when the phone turns the light
on and then turn it off, using the appropriate number keys.
Service Light (Menu 4.6.4)
This menu allows you to select whether or not the service
light is used or in which color it flashes.
Select one from the three color combinations. When the
phone is ready for use, the service light flashes in the
appropriate color.
If you do not want to use the service light, select Off
.
Graphic Logo (Menu 4.6.5)
This menu allows you to display your service provider’s
logo instead of its name.
Off: the service provider’s name displays in Idle mode.
On: the service provider’s logo stored in your phone
displays in Idle mode; if no logo has been stored, the
service provider’s name displays.
101
Phone Settings
Extra Settings (Menu 4.7)
You can turn the automatic redialing or answering features
on or off.
To turn a feature Press the
on
ON soft key.
A check mark displays in
front of the option.
off
OFF soft key.
The check mark no longer
displays.
The following options are available:
Auto Redial: when this option is checked, the phone
makes up to ten attempts to redial a phone number after
an unsuccessful call.
Note: The interval between two call attempts varies.
Open to Answer: when this option is checked, you can
simply open the folder to answer a call.
When it is unchecked, you must open the folder and press
a key to answer a call, depending on the setting of the
Anykey Answer option. See below.
Anykey Answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key and the Reject soft key. To reject the call, press
the
key or the Reject soft key.
102
Phone Settings
When this option is unchecked, you can only press the
key or Accept soft key.
Short Cut (Menu 4.8)
The Navigation keys can be used as shortcut keys. In Idle
mode, they allow you to access specific menus directly.
To assign a shortcut to a key:
1. Select the key to be used as a shortcut key by pressing
the Up or Down key, and press the Select soft key.
• Key Up
• Key Down
• Key Right
• Key Left
2. Select the menu to be assigned to the key by pressing
the Up or Down key.
Note: To deactivate a shortcut key, select the
None option.
3. Press the Select soft key to save the selection.
Reset Settings (Menu 4.9)
You can easily reset your phone to its default settings. To
reset your phone:
1. Select the Reset Settings menu.
103
Organizer
The Organizer feature enables you to:
• view the calendar and organize your schedule.
• define a list of things to do.
• set the current date and time.
• set the alarm so that the phone rings at a specific time,
such as to remind you of an appointment.
• use the phone as a calculator for basic mathematical
equations or currency exchange operations.
Calendar (Menu 5.1)
With the Calendar feature, you can:
• consult the calendar.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
105
Organizer
Consulting the Calendar
When you select the Calendar menu (Menu 5.1), the
calendar displays with today’s date highlighted. The
following options are available when you press the Options
soft key:
Search All: displays all memos set, starting with the
oldest, regardless of the day. To scroll through the memos,
press the Up or Down key.
Delete All: allows you to delete all of the memos. You are
asked to confirm your action.
Go to Date: allows you to jump to a specific date.
Exit: exits the Calendar feature and returns to Idle mode.
Writing a Memo
To write or edit a memo on a specific date:
1. Select a date on the calendar, using the Navigation
keys.
Note: To skip to the previous or next month, press the
Volume keys on the left side of the phone.
2. Press the Select soft key.
An empty memo screen displays to allow you to enter
your memo.
106
Organizer
3. Enter your memo and then press the OK soft key.
Note: For further details about how to enter characters,
see page 45.
You are asked if you wish to set an alarm.
4. If you want the alarm to ring on the chosen day, press
the Yes soft key.
Otherwise, press the No soft key. The memo is saved
and the display returns to the calendar.
5. If you pressed the Yes soft key, set the time for the
alarm and press the OK soft key.
You can also select the melody for the alarm by
pressing the Melody soft key.
6. Select either AM or PM and press the Select soft key.
Note: Your phone is preset to use 12-hour format. To
change the time format, see page 114.
The color of the date on the calendar changes to green to
indicate that a memo exists for that date.
107
Organizer
Editing a Memo
When you select a day for which a memo already exists on
the calendar, you can press the Edit soft key to edit the
memo displayed.
Note: For further details about how to enter characters, see
page 45.
When you finish editing the memo, press the OK soft key
to use the following options:
Alarm: allows you to set the alarm to ring at the specified
time to remind you of the memo. If you set the alarm
earlier, you can change or delete it.
Erase: allows you to delete the memo.
Copy to: allows you to copy the memo to another date or
time.
Move to: allows you to change the date or time of the
memo.
108
Organizer
To Do List (Menu 5.2)
This feature allows you to:
• enter a list of tasks to be done.
• assign a priority and a deadline to each task.
• sort the tasks by priority and status mark.
Creating the To Do List
1. Press the New soft key.
2. Enter the first task.
Note: You can enter up to 40 characters. For further
details about how to enter characters, see page 45.
3. Press the OK soft key.
4. Select high, normal or low priority using the Up or Down
key and press the Select soft key.
5. Enter your deadline and press the OK soft key.
If you do not want to set a deadline, press the Skip soft
key.Editing the To Do List
When you select the To Do List menu (Menu 5.2), the
current contents display with a status mark, if the task has
been done, and priority;
for Low.
for High,
for Normal and
109
Organizer
Action
Procedure
View the details 1. Highlight the task.
for a specific task
2. Press the View soft key.
3. Scroll through the tasks
using the Up and Down
keys.
Change the status 1. Highlight the task.
of a specific task
2. Press the
key to mark the
task as completed as of the
current date and time.
3. or
4. Highlight the task.
5. Press the Options soft key.
6. Select the Mark option.
7. Select the appropriate
status (Done or Undo).
Create a new task 1. Press the Options soft key.
2. Select the New option.
3. Enter text, priority and
deadline for the task.
110
Organizer
Action
Procedure (continued)
Edit an existing
task
1. Highlight the task.
2. Press the Options soft key.
3. Select the Edit option.
4. Change the text, priority
and/or deadline for the task.
Sort the existing 1. Press the Options soft key.
tasks by priority or
status
2. Select the Sort option.
3. Select the sort criterion
(
High
,
Low, Done or
Undo).
Copy a task
1. Highlight the task.
2. Press the Options soft key.
3. Select the Copy option.
4. Change the text, priority
and/or deadline for the task.
111
Organizer
Action
Procedure (continued)
Copy a task to the 1. Highlight the task.
calendar
2. Press the Options soft key.
3. Select the Copy to
Calendar option.
4. Change the text and/or
deadline for the task and set
the alarm.
Delete a task
1. Highlight the task.
2. Press the Options soft key.
3. Select the Delete option.
Delete all tasks
1. Press the Options soft key.
2. Select the Delete All
option.
3. Confirm the deletion by
pressing the OK soft key.
Exit the To Do list 1. Press the Options soft key.
2. Select the Exit option.
112
Organizer
Time & Date (Menu 5.3)
This menu allows you to change the current time and date
displayed. You can also check the current time for 22
major cities around the world.
The following options are available:
Set Time: allows you to enter the current time. You can
choose the time format in the Time Format menu (Menu
5.3.4). See below.
Note: Before setting the time, you must specify your time
zone in the World Time menu (Menu 5.3.3).
Set Date: allows you to enter the month, day and year.
World Time: allows you to find out what time it is another
part of world, using the Left and Right keys.
The screen shows the:
• city name.
• current date and time.
• time difference between the selected city and your city if
you have set the local time (see below for further
details).
• city selected as your time zone.
113
Organizer
To select your time zone:
1. Select the city corresponding to your time zone by
pressing the Left or Right key one or more times. The
local date and time display.
2. Press the Set soft key.
Time Format: allows you to change the time format to 24
Hours or 12 Hours
.
Alarm (Menu 5.4)
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the
alarm even if the phone is switched off.
The following options are available:
Once Alarm: the alarm rings only once and is then
deactivated.
Daily Alarm: the alarm rings every day at the same time.
Morning Call: the alarm rings to wake you up in the
morning.
To set the alarm:
1. Choose the type of alarm to be set and press the Select
soft key.
2. Enter the time for the alarm to sound.
114
Organizer
If you want to use the alarm options, press the Options
soft key. The following options are available:
•
•
Remove Alarm: deactivates the current alarm.
Alarm Sound Set: allows you to select an alarm
melody.
3. Press the OK soft key.
4. Choose AM or PM using the Up and Down keys and
press the Select soft key.
Note: Your phone is preset to use 12-hour format. To
change the time format, see page 114.
5. If you select Morning Call in step 1, select the repeat
option, Monday to Friday or Monday to Saturday
and press the Select soft key.
To stop the alarm when it rings, open the folder and press
the Exit soft key.
Remove Alarm: deactivates all alarm settings.
Autopower: when this option is set to Enable, the alarm
rings at the specified time, even if the phone is switched
off.
If the option is set to Disable and the phone is switched off
at the specified time, the alarm does not ring.
115
Organizer
Calculator (Menu 5.5)
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication and division.
1. Enter the first number using the numeric keys.
Notes
:
To delete mistakes or clear the display, press the
key.
To include a decimal point or a bracket, press the left soft
key until the symbol you want displays.
2. Press the right soft key until the arithmetic symbol you
want appears;
+
(addition),
-
(subtraction),
*
(multiplication),
/
(division).
3. Enter the second number.
4. To view the result, press the
key.
116
Organizer
Currency Exchange (Menu 5.6)
Using this menu, you can figure currency conversions.
1. Enter the current exchange rate of your source currency
and press the OK soft key.
You can insert a decimal point by pressing the
key.
2. Enter the amount to convert and press the OK soft key.
The amount you entered and its equivalent value
display.
3. Press the Exit soft key to exit the currency converter.
117
Network Services
These menu functions are network services. Please contact
your service provider to check their availability and
subscribe to them, if you wish.
Call Forwarding (Menu 6.1)
This network service enables incoming calls to be rerouted
to the number that you specify.
Example: You may wish to forward your business calls to a
colleague while you are on holiday.
You can use the following options to forward voice calls
and/or data calls:
Forward Always: all calls are forwarded.
Busy: calls are forwarded when you are already on another
call.
No Reply: calls are forwarded when you do not answer the
phone.
Unreachable: calls are forwarded when you are not in an
area covered by your service provider.
Cancel All: all call forwarding options are canceled.
11
Network Services
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down key and then press the Select soft key.
2. Select the type of calls, voice or data, by pressing the
Up or Down key and then press the Select soft key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To
activate call
Press the
Activate soft key. Go to
forwarding
step 4.
change the call
number
Change soft key. Go to
step 4.
deactivate call
forwarding
Remove soft key.
4. Enter the number to which the calls are to be forwarded
and press the OK soft key.
To enter an international code, press the
sign displays.
O
key until the
+
The phone sends your settings to the network and the
network’s acknowledgement displays.
You can deactivate all call forwarding settings by selecting
the Cancel All option.
119
Network Services
Call Barring (Menu 6.2)
The call barring network service allows you to restrict your
calls.
You can use the following options to restrict voice and/or
data calls:
All Outgoing: calls cannot be made.
International: international calls cannot be made.
International Except to Home: when abroad, calls can
be made only to numbers within the current country and to
your home country, which is the country where your home
network provider is located.
All Incoming: calls cannot be received.
Incoming While Abroad: calls cannot be received when
you are using your phone outside of your home service
area.
Cancel All: all call barring settings are deactivated; calls
can be made and received normally.
To set your call barring options:
1. Select a call barring option by pressing the Up or Down
key and then press the Select soft key.
2. Select the type of calls, voice or data, by pressing the
Up or Down key and then press the Select soft key.
3. Press the Activate soft key to confirm your settings.
120
Network Services
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgement displays.
To deactivate specific call barring settings:
1. Select the call barring option to be deactivated.
2. Select the type of calls to which this option applies.
3. Press the Deactivate soft key.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and the
network’s acknowledgement displays
You can also deactivate all call barring settings by selecting
the Cancel All option.
Change Barring Password: you can set and change the
call barring password obtained from your service provider
using this option. You must enter the current password
before you can specify a new one.
Once you have entered a new password, you are asked to
confirm it by entering it again.
Call Waiting (Menu 6.3)
This network service informs you when someone is trying
to reach you during another call.
121
Network Services
You can specify individual call waiting options for voice calls
and/or data calls.
To set your call waiting options:
1. Select the type of calls, voice or data, to which the call
waiting option is to be applied by pressing the Up or
Down key and then press the Select soft key.
The screen informs you whether call waiting is activated
or deactivated.
2. You can activate or deactivate the call waiting feature as
necessary by using the Activate or Deactivate soft
key respectively.
To return to the previous screen, press the Exit soft
key.
You can also deactivate all call waiting settings by selecting
the Cancel All option.
122
Network Services
Network Selection (Menu 6.4)
The Network Selection feature enables you to automatically
or manually select the network used when roaming outside
of your home area.
Note: You can select a network other than your home
network only if there is a valid roaming agreement
between them.
To indicate to automatically or manually select the network
when roaming:
1. When Network Selection displays, press the Select
soft key.
2. Press the Up or Down key until the appropriate option
highlights and then press the OK soft key.
If you select Automatic, you are connected to the first
available network when roaming.
If you select Manual, the phone scans for the available
networks. Go to Step 3.
3. Press the Up or Down key until the network you want
highlights and then press the OK soft key.
You are connected to that network.
123
Network Services
Caller ID (Menu 6.5)
You can prevent your phone number from being displayed
on the phone of the person being called.
Note: Some networks do not allow the user to change this
setting.
The following options are available:
Default: the default setting provided by the network is
used.
Hide Number: your number does not display on the other
person’s phone.
Send Number: your number is sent each time you make a
call.
Closed User Group (CUG) (Menu 6.6)
This network service allows incoming and outgoing calls to
be restricted to a selected user group. You can create up to
ten user groups.
For details on how to create and use a closed user group,
contact your service provider.
Example: A company lends SIM cards to its employees and
wants to restrict outgoing calls to members of the
same team.
124
Network Services
Activating a Closed User Group
If you select the Closed User Group menu, you can enter
the CUG function. You can now access the following options
after pressing the Select soft key:
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears. Add a
new CUG index as advised by your service provider or
delete a selected group.
To
Press the
scroll through the Up or Down key.
existing CUG
indexes
add a new CUG
index
Options soft key, select the
Add option and enter the
index.
delete a CUG
index
Options soft key and select
the Delete option.
activate a CUG
index
Options soft key and select
the Activate option.
Outside Access: lets you enable or disable calls to
numbers other than those in the Closed User Group. This
feature depends on the nature of your CUG subscription.
Please check with your service provider.
125
Network Services
Default Group: you may set a default CUG with your
service provider. If you have done so, you can enable the
Default Group option on your phone. When making a call,
you are given the option of using your default CUG, instead
of selecting one from the list.
Deactivate: deactivates the CUG function. This option
appears only when the default group is enabled or a CUG
index is selected.
126
Funbox
The Funbox menu contains several fun options.
Games (Menu 7.1)
You can enjoy two games with your phone.
Scroll to a game, using the Up and Down keys and press
the Select soft key.
For each game, the following options are available:
New game: allows you to start a game.
High Score: shows you the High Score table.
Key Info.: shows you the key operation for the game.
Continue: allows you to continue the last game you
played.
While you are playing a game:
To
Press the
adjust the volume
of the game sound
Volume keys.
pause or resume
the game
key.
key.
exit the game
At the end of the game, if your score is ranked fifth or
higher, you may enter a name of up to 10 characters.
127
Funbox
More Games (Menu 7.2)
This option opens the WAP browser to a web site where you
can download additional games.
WAP Browser (Menu 7.3)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser to allow you to access and navigate the
Wireless Web using your phone.
Home (Menu 7.3.1)
Selecting this menu connects the phone to the network and
loads the homepage of the Wireless Web service provider.
You can also press the
key in Idle mode.
The content of the WAP Browser startup homepage
depends on your Wireless Web service provider. To scroll
through the screen, use the Up and Down keys.
Note: To access the startup homepage from any other screen
in the WAP Browser, use the Home option. For more
information on the WAP Browser menus, see page 130.
Exiting the WAP Browser
To exit the browser at any time, simply press the
or press and hold the key.
key
128
Funbox
Navigating the WAP Browser
To
Press the
scroll through and
Up or Down key until the
select browser items symbol points to the required
item, and then press the OK
soft key to confirm the
selection.
select a numbered corresponding numeric key.
item
return to the
previous page
Back soft key or the
key.
return to the startup
homepage
key and select the Home
menu. For further details
about this option, see
page 130.
Entering Text in the WAP Browser
When you are prompted to enter text, the current text
input mode is indicated on the screen.
The following modes are available:
Upper-case character
(A): allows you to enter upper-
case English characters.
Lower-case character
(a): allows you to enter lower-
case English characters.
Note: You can enter symbols in upper or lower-case character
mode by pressing the key.
129
Funbox
Number
(1): allows you to enter numbers.
To change the Press the
key one or more
text input
mode
times.
To enter a
space
Press the
key.
To edit text
✑✑ Set the cursor to the right of
the character(s) to be corrected.
✑✑ Press the
key as required.
✑✑ Enter the correct
character(s).
Selecting and Using Menu Options
Various menus are available when you are using the WAP
Browser to navigate the Wireless Web.
To access a menu option:
1. Press and hold down the
A menu displays.
key.
2. Highlight a menu by pressing the Up and Down keys.
3. Select the option by pressing the Select soft key.
4. If necessary, select a secondary option using the Up and
Down keys, and press the Select soft key to confirm.
Note
:
The menus may vary, depending on your version of the
WAP Browser.
The following options are available:
130
Funbox
Reload: reloads the current page.
Home: takes you back at any time to the homepage of the
Wireless Web service provider.
Goto URL: allows you to manually enter the URL address
of a Web page. After entering an address, press the OK
soft key to go there directly.
Show URL: displays the URL address of the site to which
the current site as the startup homepage.
To
Press the
declare the current Option soft key, select the
page as your
Save to Home option and
startup homepage
press the Select soft key.
set a bookmark for Option soft key, select the
the current page
Save to Bookmark option
and press the Select soft
key.
cancel your setting Back soft key.
Edit Home: allows you to change the startup homepage
manually. Enter the required URL and press the OK soft
key. For more information about entering text, see
page 129.
Favorites (Menu 7.3.2)
This menu allows you to store the URL addresses of your
favorite web sites. You can access this menu directly by
131
Funbox
pressing and holding down the
Browser.
key while using the WAP
To store a URL address:
1. Select an empty location and press the Options soft
key.
2. Enter the address and press the Enter soft key.
Note: For further details about how to enter characters,
see page 45.
3. Enter a name for the favorite item and press the Enter
soft key.
After saving favorite items, you can use the following
options by pressing the Options soft key:
Goto URL: takes you to the site.
Edit: allows you to edit the address.
Erase: deletes the address.
http:// (Menu 7.3.3)
This menu allows you to manually enter the URL address of
the web site that you wish to access. You can access this
menu directly by pressing and holding the
WAP browser.
key in the
For further details about entering characters, see page 45.
132
Funbox
Settings (Menu 7.3.4)
This option allows you to set up five proxy servers for the
WAP browser. Contact your service provider for details.
For each server, the following options are available:
Profile Name: enter a name that you wish to assign to the
HTTP proxy server.
Homepage URL: set the address of your startup
homepage. When the default homepage displays, you can
delete it using the
key and enter your own choice.
Security: set the data transmission mode. Choose Secure
to protect your data against unauthorized access;
otherwise, choose Non-Secure
.
IP Address: enter the WAP gateway address required to
connect to the Internet.
Bearer: select the bearer to be used for each type of
network address accessed: GPRS or Data. The remaining
options depend on the Bearer setting.
When the bearer is set to GPRS
User Name: enter the User ID required to connect to the
GPRS network.
Password: enter the password required to connect to the
GPRS network.
APN: enter the access point name used for the address of
the GPRS network gateway.
133
Funbox
When the bearer is set to Data
Login Name: enter the PPP server login ID.
Password: enter the PPP server password.
Dial-up Number: enter the PPP server phone number.
Data Call Type: select a data call type: Analog or ISDN
.
Note: The WAP Browser settings may vary, depending on the
service provider. Contact your service provider for
further information.
Clear Cache (Menu 7.3.5)
You can clear the information stored in the cache, which is
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
Push Message (Menu 7.3.6)
This menu allows you to receive web messages from the
server, or to set the phone not to receive Web messages.
The following options are available:
Inbox: allows you to read the messages received from the
web server.
Receive: allows you to set whether or not your phone
receives web messages.
Delete All: allows you to delete all of the web messages.
134
Funbox
Downloads (Menu 7.4)
You can download images, sounds and MIDlets (Java
applications running on mobile phones) from various
sources using the WAP Browser and store them in your
phone. In the Downloads menu, you can access the
downloaded items.
Games & More (Menu 7.4.1)
When you access this menu, the list of the default games
appears. Once you have downloaded MIDlets, they are
added to the list.
For more details about how to download MIDlets in the
WAP browser, see page 130.
Launching a MIDlet
1. Scroll to the MIDlet you want and press the Launch soft
key.
2. Start the MIDlet using the soft keys.
Using the Menus
From the Main Screen, press the Menu soft key to access
the following options:
Info: displays information about the selected MIDlet, such
as the file size, application version, vendor, and location of
the jad file, which is the MIDlet description file.
Remove: removes the MIDlet. When the confirmation
message appears, press the Remove soft key. To cancel
your selection, press the Cancel soft key. This option is not
available for the default games.
135
Funbox
Update: accesses the server and updates the MIDlet. This
option is not available for the default games.
Entering Text
If you need to enter text while using a MIDlet, you can use
the following input modes:
ABC: allows you to enter upper-case English characters.
abc: allows you to enter lower-case English characters.
123: allows you to enter numbers.
Sym: allows you to enter symbols. After highlighting a
symbol by pressing the Navigation keys, press the
to insert it.
key
: allows you to enter English characters by pressing one
key per letter. In this mode, you can change the case by
pressing the
key.
To change the text input mode, press the
key until the
appropriate indicator appears on the soft key area of the
display.
Sounds (Menu 7.4.2)
In this menu, you can view the list of sounds downloaded
from the web server or received in multimedia messages.
You can set the downloaded sounds as the current ring
tone or send them to other phones.
When memory is full, a warning message displays and the
phone rejects additional sounds until you erase obsolete
ones.
By pressing the Options soft key, you can use the
following options:
136
Funbox
Rename: allows you to change the name of the sound.
Delete: deletes the sound.
Set as Ring Tone: sets the sound as your ring tone.
Pictures (Menu 7.4.3)
In this menu, you can view the list of pictures downloaded
from the web server or received in messages. You can set
the downloaded pictures as the current background image
or send them to other phones.
When memory is full, a warning message displays and the
phone rejects additional sounds until you erase obsolete
ones.
Press the Options soft key to use the following options:
Rename: allows you to change the name of the image.
Delete: deletes the image.
Set as Wallpaper: sets the image as your wallpaper for
the idle screen.
DNS Setting (Menu 7.4.4)
The DNS (Domain Name Server) is the server that assigns
the Java server domain name to an IP address. The DNS
setting is preset at the factory, but sometimes you may
need to change it. In this menu, you can determine
whether or not the address is automatically updated.
Automatic: the server automatically transmits the address
to the phone when it is changed.
Manual: you can manually change the address.
137
Solving Problems
If you are experiencing problems with your phone, perform
the following simple checks before contacting a service
professional. This may save you the time and expense of
an unnecessary service call.
When you switch your phone on, the following
messages may appear
Insert SIM Card
• Check that the SIM card is correctly installed.
Phone Locked Enter Password
• The automatic locking function has been enabled. You
must enter the phone’s password before you can use the
phone.
Enter PIN
• You are using your phone for the first time. You must
enter the Personal Identification Number supplied with
the SIM card.
• The PIN Check feature is enabled. Every time the phone
is switched on, the PIN has to be entered. To disable this
feature, use the PIN Check menu (Menu 4.5.1).
Enter PUK
• The PIN code was entered incorrectly three times in
succession and the phone is now blocked. Enter the PUK
supplied by your service provider.
13
Solving Problems
“No service,” “Network failure” or “Not done”
displays
• The network connection was lost. You may be in a weak
signal area (in a tunnel or surrounded by buildings).
Move and try again.
• You are trying to access an option for which you have not
taken out a subscription with your service provider.
Contact the service provider for further details.
You have entered a number but it was not
dialed
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Your correspondent cannot reach you
• Is your phone switched on (the
more than one second)?
key pressed for
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
Your correspondent cannot hear you speaking
• Have you switched off the microphone?
• Are you holding the phone close enough to your mouth?
The microphone is located at the bottom of the phone.
139
Solving Problems
The phone starts beeping and “**Warning**
Low Battery” flashes on the display
• The battery is insufficiently charged. Recharge the
battery.
The audio quality of the call is poor
• Check the signal strength indicator on the display (
the number of bars indicates the signal strength from
);
strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to a
window if you are in a building.
No number is dialed when you recall a
Phonebook entry
• Check that the number has been stored correctly, by
using the Phonebook Search feature.
• Re-store the number, if necessary.
If the above guidelines do not help you to solve
the problem, take a note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
140
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect the
phone against unauthorized use.
When requested for any of the codes explained below,
enter the appropriate code (displayed as asterisks) and
press the OK soft key. If you make a mistake, press the
key until the incorrect digit is cleared and then continue
entering the correct code.
The access codes, except for the PUK and PUK2 codes can
be changed using the Security menu (Menu 4.5). See
page 96 for further details.
Important! Avoid using access codes resembling
emergency numbers, such as 911, so that you
do not dial an emergency number accidentally.
141
Access Codes
Phone Password
The Phone Lock feature uses the phone password to
protect your phone against unauthorized use. The phone
password is supplied with the phone and is preset to
“00000000” at the factory.
To
See
activate/deactivate the
Phone Lock feature
page 97
(Menu 4.5.3).
change the phone
password
page 98
(Menu 4.5.4).
PIN
The
Personal
Identification
Number or PIN (4 to 8 digits)
protects your SIM card against unauthorized use. It is
usually supplied with the SIM card.
If you enter an incorrect PIN three times in succession, the
code is disabled and cannot be used until you re-enable it
by entering the PUK. See below.
To
See
activate/deactivate the
PIN Check feature
page 96
(
Menu 4.5.1).
page 97
Menu 4.5.2).
change the PIN
(
142
Access Codes
PUK
The 8-digit PUK (
PIN
Unblocking
Key) is required to
change a disabled PIN. The PUK may be supplied with the
SIM card. If not, or you have lost it, contact your service
provider.
To re-enable your PIN:
1. Enter the PUK and press the OK soft key.
2. Enter a new PIN of your choice and press the OK soft
key.
3. When the Confirm New PIN message displays, enter
the same code again and press the OK soft key.
When you enter an incorrect PUK ten times in succession,
the SIM card becomes invalid. Contact your service
provider for a new card.
PIN2
The PIN2 (4 to 8 digits), supplied with some SIM cards, is
required to access specific functions, such as setting the
maximum cost of a call. These functions are available if
supported by your SIM card.
If you enter an incorrect PIN2 three times in succession,
the code is disabled and you cannot access the functions
until you re-enable it by entering the PUK2.
To change the PIN2, see page 99 (Menu 4.5.7).
143
Access Codes
PUK2
The 8-digit PUK2 (
PIN
Unblocking
Key
2), supplied with
some SIM cards, is required to change a disabled PIN2. If
you lose the code, contact your service provider.
To re-enable your PIN2:
1. Enter the PUK2 and press the OK soft key.
2. Enter a new PIN2 of your choice and press the OK soft
key.
3. When the Confirm PIN2 message displays, enter the
same code again and press the OK soft key.
When you enter an incorrect PUK2 ten times in succession,
you are not able to access the functions requiring the PIN2.
Contact your service provider for a new card.
144
Health and Safety
Information
Exposure to Radio Frequency (RF)
Signals
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission
limits for exposure to radio frequency (RF) energy set by
the Federal Communications Commission (FCC) of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on the
safety standards that were developed by independent
scientific organizations through periodic and through
evaluation of scientific studies.
The standards include a substantial safety margin designed
to assure the safety of all persons, regardless of age and
health.
The exposure standard for wireless phones employs a unit
of measurement known as Specific Absorption Rate (SAR).
The SAR limit recommended by the FCC is
*
1.6W/kg.
*. In the U.S. and Canada, the SAR limit for mobile phones used
by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue.
The standard incorporates a substantial margin of safety to give addi-
tional protection for the public and to account for any variations in mea-
surements.
145
Health and Safety Information
SAR tests are conducted using standard operating positions
specified by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output of the phone.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations (e.g., at the ear and
worn on the body) as required by the FCC for each model.
While there may be differences between the SAR levels of
various phones and at various positions, they all meet the
government requirement.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display Grant section of http://
www.fcc.gov/oet/fccid after searching on FCC ID printed in
the label on the phone.
FCC certification information for this model phone is
attached separation paper.
146
Health and Safety Information
For Body Operation
For body worn operation, this model phone has been tested
and meets the FCC RF exposure guidelines when used with
a Samsung-supplied or approved accessory designated for
this product or when used with and accessory that contains
no metal and that positions the handset a minimum from
the body.
The minimum distance for this model phone is written in
the FCC certification information from the body. None
compliance with the above conditions may violate FCC RF
exposure guidelines.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC)
http://www.fcc.gov
Cellular Telecommunications Industry Association (CTIA):
http://www.wow-com.com
U.S.Food and Drug Administration (FDA)
http://www.fda.gov/cdrh/consumer
World Health Organization (WHO)
http://www.who.int/peh-emf/en
147
Health and Safety Information
Precautions When Using Batteries
• Never use any charger or battery that is damaged in any
way.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base station, it
uses less power; talk and standby time are greatly
affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The
battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation
time (talk time and standby time) is noticeably shorter
than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself
over time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a
charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger
for more than a week, since overcharging may shorten
its life.
• Extreme temperatures will affect the charging capacity of
your battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in
a car in summer or winter conditions, as you will reduce
the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a
hot or cold battery may temporarily not work, even when
148
Health and Safety Information
the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin, clip or
pen) causes a direct connection between the + and –
terminals of the battery (metal strips on the battery), for
example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of batteries
in a fire.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When
using your wireless phone behind the wheel of a car,
practice good common sense and remember the following
tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features
help you to place your call without taking your
attention off the road.
2. When available, use a hands-free device. If possible,
add an extra layer of convenience and safety to your
149
Health and Safety Information
wireless phone with one of the many hands-free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice
and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a To Do list or flipping through
your phonebook takes your attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make the people with whom
you are talking aware that you are driving and suspend
conversations that have the potential to divert your
attention from the road.
8. Use your wireless phone to call for help. Dial the
emergency number in the case of fire, traffic accident
or medical emergencies. Remember, it is a free call on
your wireless phone!
150
Health and Safety Information
9. Use your wireless phone to help others in emergencies.
If you see a car accident, crime in progress or other
serious emergency where lives are in danger, call the
emergency number, as you would want others to do for
you.
10.If you see a broken-down vehicle posing no serious
hazard, a broken traffic signal, a minor traffic accident
where no one appears injured, or a vehicle you know to
be stolen, call roadside assistance or any other special
non-emergency wireless number.
Operating Environment
Remember to follow any special regulations in force in any
area and always switch your phone off whenever it is
forbidden to use it, or when it may cause interference or
danger.
When connecting the phone or any accessory to another
device, read its user’s guide for detailed safety instructions.
Do not connect incompatible products.
As with other mobile radio transmitting equipment, users
are advised that for the satisfactory operation of the
equipment and for the safety of personnel, it is
recommended that the equipment should only be used in
the normal operating position (held to your ear with the
antenna pointing over your shoulder).
151
Health and Safety Information
Electronic Devices
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals from
your wireless phone. Consult the manufacturer to discuss
alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker. These recommendations
are consistent with the independent research and
recommendations of Wireless Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6
inches) from their pacemaker when the phone is
switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aids
Some digital wireless phones may interfere with some
hearing aids. In the event of such interference, you may
152
Health and Safety Information
wish to consult your hearing aid manufacturer to discuss
alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be
able to assist you in obtaining this information. Switch your
phone off in health care facilities when any regulations
posted in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with
the manufacturer or its representative regarding your
vehicle.
You should also consult the manufacturer of any equipment
that has been added to your vehicle.
You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices
require you to do so.
153
Health and Safety Information
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of the
need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas),
chemical plants or where blasting operations are in
progress.
Areas with a potentially explosive atmosphere are often but
not always clearly marked. They include below deck on
boats, chemical transfer or storage facilities, vehicles using
liquefied petroleum gas (such as propane or butane), areas
where the air contains chemicals or particles, such as
grain, dust or metal powders, and any other area where
you would normally be advised to turn off your vehicle
engine.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection
in all conditions. Therefore, you should never rely solely on
any wireless phone for essential communications (medical
emergencies, for example).
154
Health and Safety Information
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network services
and/or phone features are in use. Check with local service
providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
you may first need to deactivate those features before you
can make an emergency call. Consult this document and
your local cellular service provider.
When making an emergency call, remember to give all the
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Other Important Safety Information
• Only qualified personnel should service the phone or
install the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the device.
155
Health and Safety Information
• Check regularly that all wireless phone equipment in
your vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as the
phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an
air bag inflates with great force. Do not place objects,
including both installed or portable wireless equipment in
the area over the air bag or in the air bag deployment
area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
• Switch your phone off before boarding an aircraft. The
use of wireless phones in aircraft is illegal and may be
dangerous to the aircraft’s operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the
offender, or legal action, or both.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years
• Keep the phone and all its parts and accessories out of
the reach of small children’s.
• Keep the phone dry. Precipitation, humidity and liquids
contain minerals that will corrode electronic circuits.
156
Health and Safety Information
• Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as
its moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature, moisture
can form inside the phone, which may damage the
phone’s electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling
can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may
explode when overheated.
• Use only the supplied or an approved replacement
antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations
governing radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
157
Health and Safety Information
Acknowledging Special Precautions and
the FCC and Industry Canada Notice
Cautions
Modifications not expressly approved by the party
responsible for compliance could void the user's
authority to operate the equipment.
FCC Compliance Information
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
1. This device may not cause harmful interference,
and
2. This device must accept any interference
received.
Including interference that may cause undesired
operation.
Information to User
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation.
158
Health and Safety Information
This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician
for help.
159
Appendix A: CERTIFICATION INFORMATION (SAR)
Appendix A: CERTIFICATION
INFORMATION (SAR)
THIS MODEL PHONE MEETS THE GOVERNMENT’S
REQUIREMENTS FOR EXPOSURE TO RADIO WAVES.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the emission
limits for exposure to radio frequency(RF) energy set by
the Federal Communications Commission of the U.S.
Government. These limits are part of comprehensive
guidelines and establish permitted levels of RF energy for
the general population. The guidelines are based on safety
standards that were developed by independent scientific
organizations through periodic and thorough evaluation of
scientific studies. The standards include a substantial
safety margin designed to assure the safety of all persons,
regardless of age and health.
The exposure standard for wireless mobile phones employs
a unit of measurement known as the Specific Absorption
Rate (SAR). The SAR limit set by the FCC is 1.6 W/kg. SAR
Tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its
highest certified power level in all tested frequency bands.
Although the SAR is determined at the highest certified
power level, the actual SAR level of the phone while
operating can be well below the maximum value. This is
because the phone is designed to operate at multiple power
levels so as to use only the power required to reach the
network. In general, the closer you are to a wireless base
station antenna, the lower the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
160
Appendix A: CERTIFICATION INFORMATION (SAR)
does not exceed the limit established by the government-
adopted requirement for safe exposure. The tests are
performed in positions and locations(e.g., at the ear and
worn on the body) as required by the FCC for each model.
The highest SAR values for this model phone as reported to
the FCC are Head: 1.37W/Kg, Body-worn: 0.689W/Kg.
Body-worn operations are restricted to Samsung-supplied,
approved or none Samsung designated accessories that
have no metal and must provide at least 1.5cm separation
between the device, including its antenna whether
extended or retracted, and the user’s body. None
compliance to the above restrictions may violate FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this
model phone with all reported SAR levels evaluated as in
compliance with the FCC RF exposure guidelines. SAR
information on this model phone is on file with the FCC and
can be found under the Display Grant section of
http://www.fcc.gov/oet/fccid after searching on FCC ID
A3LSGHX427
.
In the United States and Canada, the SAR limit for mobile phones used by the
public is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The
standard incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in measurements.
161
Appendix B: Guide to Safe and Responsible Wireless Phone Use
Appendix B: Guide to Safe and Responsible
Wireless Phone Use
Cellular Telecommunications & Internet Association
“Safety is the most important call you will ever make.”
A Guide to Safe and Responsible Wireless Phone Use
TENS OF MILLIONS OF PEOPLE IN THE U.S. TODAY TAKE
ADVANTAGE OF THE UNIQUE COMBINATION OF
CONVENIENCE, SAFETY AND VALUE DELIVERED BY THE
WIRELESS TELEPHONE. QUITE SIMPLY, THE WIRELESS
PHONE GIVES PEOPLE THE POWERFUL ABILITY TO
COMMUNICATE BY VOICE-ALMOST ANYWHERE, ANYTIME-
WITH THE BOSS, WITH A CLIENT, WITH THE KIDS, WITH
EMERGENCY PERSONNEL OR EVEN WITH THE POLICE.
EACH YEAR, AMERICANS MAKE BILLIONS OF CALLS FROM
THEIR WIRELESS PHONES, AND THE NUMBERS ARE
RAPIDLY GROWING.
But an important responsibility accompanies those
benefits, one that every wireless phone user must uphold.
When driving a car, driving is your first responsibility. A
wireless phone can be an invaluable tool, but good
judgment must be exercised at all times while driving a
motor vehicle-whether on the phone or not.
The basic lessons are ones we all learned as teenagers.
Driving requires alertness, caution and courtesy. It requires
a heavy dose of basic common sense-keep your head up,
keep your eyes on the road, check your mirrors frequently
and watch out for other drivers. It requires obeying all
traffic signs and signals and staying within the speed limit.
It means using seat belts and requiring other passengers to
do the same.
162
Appendix B: Guide to Safe and Responsible Wireless Phone Use
But with wireless phone use, driving safely means a little
more. This brochure is a call to wireless phone users
everywhere to make safety their first priority when behind
the wheel of a car. Wireless telecommunications is keeping
us in touch, simplifying our lives, protecting us in
emergencies and providing opportunities to help others in
need. When it comes to the use of wireless phones, safety
is your most important call.
Wireless Phone “Safety Tips”
Below are safety tips to follow while driving and using a
wireless phone which should be easy to remember:
1. Get to know your wireless phone and its features such as
speed dial and redial. Carefully read your instruction
manual and learn to take advantage of valuable features
most phones offer, including automatic redial and
memory. Also, work to memorize the phone keypad so
you can use the speed dial function without taking your
attention off the road.
2. When available, use a hands free device. A number of
hands free wireless phone accessories are readily
available today. Whether you choose an installed
mounted device for your wireless phone or a speaker
phone accessory, take advantage of these devices if
available to you.
3. Position your wireless phone within easy reach. Make
sure you place your wireless phone within easy reach and
where you can grab it without removing your eyes from
the road. If you get an incoming call at an inconvenient
time, if possible, let your voice mail answer it for you.
4. Suspend conversations during hazardous driving
conditions or situations. Let the person you are speaking
163
Appendix B: Guide to Safe and Responsible Wireless Phone Use
with know you are driving; if necessary, suspend the call
in heavy traffic or hazardous weather conditions. Rain,
sleet, snow and ice can be hazardous, but so is heavy
traffic. As a driver, your first responsibility is to pay
attention to the road.
5. Do not take notes or look up phone numbers while
driving. If you are reading an address book or business
card, or writing a “to do” list while driving a car, you are
not watching where you are going. It’s common sense.
Don’t get caught in a dangerous situation because you
are reading or writing and not paying attention to the
road or nearby vehicles.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan your calls before you begin your trip or attempt to
coincide your calls with times you may be stopped at a
stop sign, red light or otherwise stationary. But if you
need to dial while driving, follow this simple tip-dial only
a few numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Stressful or emotional
conversations and driving do not mix-they are distracting
and even dangerous when you are behind the wheel of a
car. Make people you are talking with aware you are
driving and if necessary, suspend conversations which
have the potential to divert your attention from the road.
8. Use your wireless phone to call for help. Your wireless
phone is one of the greatest tools you can own to protect
yourself and your family in dangerous situations-with
your phone at your side, help is only three numbers
away. Dial 9-1-1 or other local emergency number in the
164
Appendix B: Guide to Safe and Responsible Wireless Phone Use
case of fire, traffic accident, road hazard or medical
emergency. Remember, it is a free call on your wireless
phone!
9. Use your wireless phone to help others in emergencies.
Your wireless phone provides you a perfect opportunity to
be a “Good Samaritan” in your community. If you see an
auto accident, crime in progress or other serious
emergency where lives are in danger, call 9-1-1 or other
local emergency number, as you would want others to do
for you.
10.Call roadside assistance or a special wireless non-
emergency assistance number when necessary. Certain
situations you encounter while driving may require
attention, but are not urgent enough to merit a call for
emergency services. But you still can use your wireless
phone to lend a hand. If you see a broken-down vehicle
posing no serious hazard, a broken traffic signal, a minor
traffic accident where no one appears injured or a vehicle
you know to be stolen, call roadside assistance or other
special non-emergency wireless number.
Careless, distracted individuals and people driving
irresponsibly represent a hazard to everyone on the road.
Since 1984, the Cellular Telecommunications Industry
Association and the wireless industry have conducted
educational outreach to inform wireless phone users of
their responsibilities as safe drivers and good citizens. As
we approach a new century, more and more of us will take
advantage of the benefits of wireless telephones. And, as
we take to the roads, we all have a responsibility to drive
safely.
“The wireless industry reminds you to use your phone
safely when driving.”
165
Appendix B: Guide to Safe and Responsible Wireless Phone Use
Cellular Telecommunications & Internet Association
For more information, please call 1-888-901-SAFE. For
updates: http://www.wow-com.com/consumer/issues/
driving/articles.cfm?ID=85
166
Appendix C: Consumer Update on Wireless Phones
Appendix C: Consumer Update on Wireless
Phones
U.S. Food and Drug Administration
1. What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called cell, mobile, or
PCS phones. These types of wireless phones can expose
the user to measurable radio frequency energy (RF)
because of the short distance between the phone and the
user s head. These RF exposures are limited by Federal
Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health
and safety agencies. When the phone is located at greater
distances from the user, the exposure to RF is drastically
lower because a person’s RF exposure decreases rapidly
with increasing distance from the source. The so-called
“cordless phones,” which have a base unit connected to the
telephone wiring in a house, typically operate at far lower
power levels, and thus produce RF exposures well within
the FCC’s compliance limits.
2. Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless phones.
There is no proof, however, that wireless phones are
absolutely safe. Wireless phones emit low levels of radio
frequency energy (RF) in the microwave range while being
used. They also emit very low levels of RF when in the
stand-by mode. Whereas high levels of RF can produce
health effects (by heating tissue), exposure to low level RF
that does not produce heating effects causes no known
167
Appendix C: Consumer Update on Wireless Phones
adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
3. What is FDA’s role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones
before they can be sold, as it does with new drugs or
medical devices. However, the agency has authority to take
action if wireless phones are shown to emit radio frequency
energy (RF) at a level that is hazardous to the user. In such
a case, FDA could require the manufacturers of wireless
phones to notify users of the health hazard and to repair,
replace or recall the phones so that the hazard no longer
exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the following:
Support needed research into possible biological effects of
RF of the type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device
function; and
Cooperate in providing users of wireless phones with the
best possible information on possible effects of wireless
phone use on human health
168
Appendix C: Consumer Update on Wireless Phones
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level.
The following agencies belong to this working group:
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information
Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless phones
with the Federal Communications Commission (FCC). All
phones that are sold in the United States must comply with
FCC safety guidelines that limit RF exposure. FCC relies on
FDA and other health agencies for safety questions about
wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
those they can get from wireless phones. Base stations are
thus not the primary subject of the safety questions
discussed in this document.
4. What is FDA doing to find out more about the possible
health effects of wireless phone RF?
169
Appendix C: Consumer Update on Wireless Phones
FDA is working with the U.S. National Toxicology Program
and with groups of investigators around the world to
ensure that high priority animal studies are conducted to
address important questions about the effects of exposure
to radio frequency energy (RF).
FDA has been a leading participant in the World Health
Organization International Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
of research needs that has driven the establishment of new
research programs around the world. The Project has also
helped develop a series of public information documents on
EMF issues.
FDA and the Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research and
Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
5. What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products—and at this point we
do not know that there is—it is probably very small. But if
you are concerned about avoiding even potential risks, you
can take a few simple steps to minimize your exposure to
radio frequency energy (RF). Since time is a key factor in
170
Appendix C: Consumer Update on Wireless Phones
how much exposure a person receives, reducing the
amount of time spent using a wireless phone will reduce RF
exposure.
If you must conduct extended conversations by wireless
phone every day, you could place more distance between
your body and the source of the RF, since the exposure
level drops off dramatically with distance. For example, you
could use a headset and carry the wireless phone away
from your body or use a wireless phone connected to a
remote antenna
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
6. What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply to
children and teenagers using wireless phones. Reducing
the time of wireless phone use and increasing the distance
between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in the
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
171
Appendix C: Consumer Update on Wireless Phones
wireless phone use by children was strictly precautionary;
it was not based on scientific evidence that any health
hazard exists.
7. Do hands-free kits for wireless phones reduce risks
from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF energy
in the head because the phone, which is the source of the
RF emissions, will not be placed against the head. On the
other hand, if the phone is mounted against the waist or
other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirements regardless of whether they are used against
the head or against the body. Either configuration should
result in compliance with the safety limit.
8. Do wireless phone accessories that claim to shield the
head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that accessories that claim to shield the head from
those emissions reduce risks. Some products that claim to
shield the user from RF absorption use special phone cases,
while others involve nothing more than a metallic
accessory attached to the phone. Studies have shown that
these products generally do not work as advertised. Unlike
“hand-free” kits, these so-called “shields” may interfere
with proper operation of the phone. The phone may be
172
Appendix C: Consumer Update on Wireless Phones
forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal
trade Commission (FTC) charged two companies that sold
devices that claimed to protect wireless phone users from
radiation with making false and unsubstantiated claims.
According to FTC, these defendants lacked a reasonable
basis to substantiate their claim.
9. What about wireless phone interference with medical
equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason, FDA
helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillators are safe from wireless phone EMI.
FDA has tested hearing aids for interference from handheld
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic
Engineers (IEEE). This standard specifies test methods and
performance requirements for hearing aids and wireless
phones so that no interference occurs when a person uses
a compatible phone and a compatible hearing aid at the
same time. This standard was approved by the IEEE in
2000.
173
Appendix C: Consumer Update on Wireless Phones
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmful interference be found to occur, FDA will conduct
testing to assess the interference and work to resolve the
problem.
10.What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in their
research methods. Animal experiments investigating the
effects of radiofrequency energy (RF) exposures
characteristic of wireless phones have yielded conflicting
results that often cannot be repeated in other laboratories.
A few animal studies, however, have suggested that low
levels of RF could accelerate the development of cancer in
laboratory animals. However, many of the studies that
showed increased tumor development used animals that
had been genetically engineered or treated with cancer-
causing chemicals so as to be pre-disposed to develop
cancer in the absence of RF exposure. Other studies
exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under
which people use wireless phones, so we don t know with
certainty what the results of such studies mean for human
health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, gioma,
meningioma, or acoustic neuroma, tumors of the brain or
salivary gland, leukemia, or other cancers. None of the
studies demonstrated the existence of any harmful health
effects from wireless phone RF exposures. However, none
174
Appendix C: Consumer Update on Wireless Phones
of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
11.What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological
studies of people actually using wireless phones would
provide some of the data that are needed. Lifetime animal
exposure studies could be completed in a few years.
However, very large numbers of animals would be needed
to provide reliable proof of a cancer promoting effect if one
exists. Epidemiological studies can provide data that is
directly applicable to human populations, but 10 or more
years follow-up may be needed to provide answers about
some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing
agent and the time tumors develop - if they do - may be
many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which
the phone is held, or which model of phone is used.
12.Which other federal agencies have responsibilities
related to potential RF health effects?
175
Appendix C: Consumer Update on Wireless Phones
Additional information on the safety of RF exposures from
various sources can be obtained from the following
organizations.
FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
Occupational Safety and Health Administration’s (OSHA):
http://www.osha-slc.gov/SLTC/radiofrequencyradiation/
index.html
National Institute for Occupational Safety and Health
(NIOSH):
http://www.cdc.gov/niosh/emfpg.html
World health Organization (WHO):
http://www.who.int/peh-emf/
International Commission on Non-Ionizing Radiation
Protection:
http://www.icnirp.de
National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Updated 4/3/2002: US Food and Drug Administration http://
www.fda.gov/cellphones
176
Appendix C: Consumer Update on Wireless Phones
STANDARD LIMITED WARRANTY
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants to the
original purchaser (“Purchaser”) that SAMSUNG’s Phones and accessories
(“Products”) are free from defects in material and workmanship under
normal use and service for the period commencing upon the date of
purchase and continuing for the following specified period of time after
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
Other Phone Accessories
90 Days
90 Days
1 Year
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does not
cover: (a) defects or damage resulting from accident, misuse, abuse,
neglect, unusual physical, electrical or electromechanical stress, or
modification of any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that
are scratched or damaged due to normal use; (d) malfunctions resulting
from the use of Product in conjunction with accessories, products, or
ancillary/peripheral equipment not furnished or approved by SAMSUNG;
(e) defects or damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the United States or
Canada. This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been charged
by a battery charger not specified or approved by SAMSUNG for charging
the battery, (ii) any of the seals on the battery are broken or show
evidence of tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
What are SAMSUNG’s Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG’s sole option,
without charge to Purchaser, any defective component part of Product. To
obtain service under this Limited Warranty, Purchaser must return
Product to an authorized phone service facility in an adequate container
for shipping, accompanied by Purchaser’s sales receipt or comparable
substitute proof of sale showing the date of purchase, the serial number
of Product and the sellers’ name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-
177
Appendix C: Consumer Update on Wireless Phones
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG’s sole option, use rebuilt,
reconditioned, or new parts or components when repairing any Product
or replace Product with a rebuilt, reconditioned or new Product.
Repaired/replaced leather cases, pouches and holsters will be warranted
for a period of ninety (90) days. All other repaired/replaced Product will
be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall become the
property of SAMSUNG. If SAMSUNG determines that any Product is not
covered by this Limited Warranty, Purchaser must pay all parts, shipping,
and labor charges for the repair or return of such Product.
What Are the Limits On SAMSUNG’s Liability? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER
TAKES THE PRODUCT “AS IS,” AND SAMSUNG MAKES NO WARRANTY OR
REPRESENTATION AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES/PROVINCES DO
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN
ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR
INABILITY TO USE THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY
FROM THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE
BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL,
SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
178
Appendix C: Consumer Update on Wireless Phones
BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/PROVINCES DO NOT
ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/
PROVINCE TO PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND
TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT
AND STATES PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF
THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED
BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-
PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
OR OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure between Purchaser
and SAMSUNG, and SAMSUNG’s Product pricing reflects this allocation of
risk and the limitations of liability contained in this Limited Warranty. The
agents, employees, distributors, and dealers of SAMSUNG are not
authorized to make modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether oral or
written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Samsung Telecommunications America, L.P.
1130 East Arapaho Road
Richardson, Texas 75081
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
179
Appendix C: Consumer Update on Wireless Phones
©2002 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval.
Specifications and availability subject to change without notice. [080802]
180
Glossary
Glossary
To help you understand the main technical terms and
abbreviations used in this booklet and take full advantage
of the features on your mobile phone, here are a few
definitions.
Call Forwarding
Ability to reroute calls to another number.
Call Holding
Ability to put one call on standby while answering or
making another call; you can then switch between the two
calls, as required.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
Caller Line Identification Services
(Caller ID)
Services allowing subscribers to view or block the
telephone numbers of callers.
181
Glossary
Dual Band
Ability to operate with both DCS (1900 MHz) and GSM (850
MHz) networks. The phone automatically uses the network
with strongest signal and even switches networks during a
call within the same operator’s network.
EMS (Enhanced Message Service)
An adaptation of the Short Message Service (SMS) that
allows you to send and receive ring tones and service
provider’s logo, as well as combinations of simple media to
and from EMS-compliant handsets. Because EMS is based
on SMS, it can use SMS centres the same way that SMS
does. EMS works on all Global System for Mobile
communications (GSM) networks. EMS senders can use
text, melodies, pictures, sounds, and animations to
enhance the expressive power of messages that are limited
by the display constraints of mobile devices.
GSM (Global System for Mobile Communication)
International standard for cellular communication,
guaranteeing compatibility between the various network
operators. GSM covers most European countries and many
other parts of the world.
182
Glossary
Java
Programming language generating applications that can
run on all hardware platforms, whether small, medium or
large, without modification. It has been promoted for and
geared heavily to the Web, both for public Web sites and
Intranets. When a Java program runs from a Web page, it
is called a Java applet. When it is run on a mobile phone or
pager, it is called a MIDlet.
Multi-party Calling
Ability to establish a conference call involving up to five
additional parties.
Open to Answer
Ability to answer a call simply by opening the phone.
Phone Password
Security code used to unlock the phone when you have
selected the option to lock it automatically each time it
switches on.
PIN (Personal Identification Number)
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-digit
number and can be changed, as required.
Proxy Server
A server that resides between a web client, such as a web
browser, and a real Web server and acts as an intermediary
between them. When some people browse a web site, their
183
Glossary
browser is not actually connecting to the web server. The
request from their browser goes to a proxy server, and the
proxy server makes the request to the web server.
A proxy server can improve performance for groups of
users because it cache the results of all requests for a
certain amount of time. If a user requests a web page that
it already fetched for another user, it returns the page
instead of forwarding the request to the Web server, which
can be a time-consuming operation.
PUK (PIN Unblocking Key)
Security code that protects the phone/SIM against
unauthorized use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-digit
number and can be changed, as required.
Roaming
Use of your phone when you are outside your home area
(when traveling for example).
184
Glossary
SIM (Subscriber Identification Module)
Card containing a chip with all the information required to
operate the phone (network and memory information, as
well as the subscriber’s personal data). The SIM card fits
into a small slot on the back of the phone and is protected
by the battery.
SMS (Short Message Service)
Network service sending and receiving messages to and
from another subscriber without having to speak to the
correspondent. The message created or received can be
displayed, received, edited or sent.
Soft Keys
Two keys marke
d
and
on the phone, the purpose of
which:
• varies according to the function that you are currently
using
• is indicated on the bottom line of the display just above
the corresponding key.
Voice Mail
Computerized answering service that automatically
answers your calls when you are not available, plays a
greeting (optionally in your own voice) and records a
message.
185
Glossary
186
Index
Call time • 87
Caller groups
editing • 41
searching • 40
Caller ID • 124
Calls
A
Access codes • 141
Alarm • 114
Alert type • 89
Answering
call • 27
answering • 27
barring • 120
ending • 24
forwarding • 118
holding • 53
,
58
second call • 58
Anykey answer • 102
Auto redial • 102
making • 23
redialing • 25
rejecting • 27
B
Background image • 93
Backlight
auto light • 101
description • 14
time, set • 100
Barring, calls • 120
Battery
waiting • 58 121
,
CB (Cell Broadcast) messages •
83
Characters, enter • 45
Charging battery • 19
Closed User Group (CUG) • 124
Conference call • 59
Connect tone • 92
charging • 19
installing • 18
low indicator • 21
precautions • 148
removing • 18
Currency exchange • 117
D
Broadcast messages • 83
Browser, WAP • 128
Date, set • 113
Deleting
calendar memo • 108
call record • 85
phonebook • 37
task • 112
C
Calculator • 116
Calendar memos
copying • 108
erasing • 108
text message • 72 73
,
Delivery reports, message • 79
Dialed calls • 86
Display
viewing • 106
writing • 106
Call back, message • 72
Call costs • 88
Call records
backlight • 14
icons • 13
layout • 12
settings • 100
incoming • 86
missed • 28 85
,
DNS settings • 137
DTMF tones, send • 56
outgoing • 86
187
Index
E
K
Earpiece volume • 26
Emergency calls • 154
EMS (Enhanced Message
Service) • 71
Key volume • 26
Keypad tones
selecting • 89
sending • 55
Keys
Error tone • 92
description •
location •
shortcut • 103
9
8
F
FDN (Fixed Dial Number)
mode • 99
L
Folder tone • 91
Forwarding, calls • 118
Funbox • 127
Language, select • 96
Last number, redial • 25
Locking
phone • 97
G
SIM card • 98
Games • 127
Graphic logo • 101
Greeting message • 104
Low battery indicator • 21
Lower-case characters
entering • 49
H
M
Health and safety • 145
Holding, call • 53
Memory status
phonebook • 44
text messages • 81
Menu style • 94
Menus
I
Icons, description • 13
Inbox, messages • 71
International calls • 23
Internet • 128
accessing • 62
list • 65
Message tone • 90
Messages
cell broadcast • 83
greeting • 104
multimedia • 136
reading • 71
setting • 78
text • 71
voice • 82
J
Java service • 135
web • 134
188
Index
MIDlets • 135
resetting • 103
switching on/off • 21
unpacking •
Phonebook
Minute minder • 92
Missed calls • 28
Morning call • 114
,
85
7
Multi-party calls • 59
Muting
copying • 38
editing • 37
erasing • 37
options • 37
searching/dialing • 38
speed-dialing • 42
storing • 34
all sounds • 30
key tones • 55
microphone • 54
N
Names
Pictures, downloaded • 137
PIN
changing • 97
description • 142
PIN2
changing • 99
description • 143
Power on/off tone • 91
Problems, solving • 138
PUK • 143
entering • 45
searching/dialing • 38
Network selection • 123
Network services • 118
Numbers, phone
searching/dialing • 38
storing • 34
PUK2 • 144
O
On/off switch, phone • 21
Organizer • 105
R
Outbox, messages • 73
Own number • 95
Radio-frequency • 145
Received calls • 86
Received messages • 71
Redialing
automatically • 102
manually • 25
Resetting phone • 103
Ring tone • 88
P
Password
call barring • 121
phone • 98
,
142
Phone
Ring type • 89
care and maintenance •
156
display • 12
icons • 13
keys •
Ring volume • 89, 94, 128
Road safety • 149
Roaming • 123
9
layout •
8
locking • 97
password • 142
189
Index
Time, set • 113
To do list • 109
Tone
S
Safety
information • 145
connect • 92
error • 92
folder • 91
keypad • 89
message • 90
minute minder • 92
power on/off • 91
ring • 88
Scheduler • 105
Searching, phonebook • 38
Security, calls • 96
Sent messages, text • 73
Service light • 15 101
Shortcut, menu • 103
SIM card
,
installing • 16
locking • 98
Travel adapter • 19
SMS (Short Message Service)
Inbox • 71
U
Outbox • 73
Upper-case characters
Soft keys • 31
entering • 49
Sound settings • 88
Sounds, downloaded • 136
Speed-dialing • 42
Switching on/off
microphone • 54
phone • 21
User group • 124
V
Vibration • 30
Voice mail • 82
,
89
Symbol mode, text input •
51
Voicemail server • 82
Volume, adjust
keypad tone • 26
ring • 89
Volume,adjusting
earpiece • 26
T
T9 mode, text input • 47
Tasks, to do list
creating • 109
editing • 109
Templates, message, text •
76
W
Waiting call • 58
Wallpaper • 93
WAP browser
,
121
Text input mode • 46
Text message
accessing • 128
cache, clear • 134
favorites • 131
setting • 133
creating/sending • 74
deleting • 72
,
73
73
reading • 71
,
setting • 78
World time • 113
Writing messages • 74
Text, enter • 45
Time format • 114
190
191
192
|