Smartphone
SGH-i320
User’s Guide
CHAPTER 4 Call functions
Turning the phone functions on and off . . . . . . . . . . . . . 50
CHAPTER 5 Messaging, Internet, and Messenger
CHAPTER 6 Organiser
Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
D-Day . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Voice Notes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106
WorldClock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
CHAPTER 7 Multimedia
Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108
Windows Media Player . . . . . . . . . . . . . . . . . . . . . . . . 114
Picture & Videos . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
3
Table of Contents
CHAPTER 8 Extra programs
Calculator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
SIM Manager . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
General problems . . . . . . . . . . . . . . . . . . . . . . . . . . . 154
Call problems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Power and charging problems . . . . . . . . . . . . . . . . . . . 157
Application problems . . . . . . . . . . . . . . . . . . . . . . . . . 159
CHAPTER 11 Regulatory notices
SAR certification information . . . . . . . . . . . . . . . . . . . . 164
European union notice . . . . . . . . . . . . . . . . . . . . . . . . 165
Important safety information . . . . . . . . . . . . . . . . . . . 166
Safety precautions for power supply unit . . . . . . . . . . . 168
Care and maintenance . . . . . . . . . . . . . . . . . . . . . . . . 169
Microsoft End User License Agreement . . . . . . . . . . . . . 171
DESCRIPTION OF OTHER RIGHTS
AND LIMITATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . 173
4
Important safety precautions
Read these guidelines before using your wireless phone.
Failure to comply with them may be dangerous or illegal.
Drive safely at all times
Do not use a hand-held phone while driving. Park the
vehicle first.
Switch off the phone when refuelling
Do not use the phone at a refuelling point (service station)
or near fuels or chemicals.
Switch off in an aircraft
Wireless phones can cause interference. Using them in an
aircraft is both illegal and dangerous.
Switch off the phone near all medical equipment
Hospitals or health care facilities may be using equipment
that could be sensitive to external radio frequency energy.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference, which
could affect their performance.
Be aware of special regulations
Meet any special regulations in force in any area and
always switch off your phone whenever it is forbidden to
use it, or when it may cause interference or danger.
Water resistance
Your phone is not water-resistant. Keep it dry.
Sensible use
Use only in the normal position (held to the ear). Avoid
unnecessary contact with the antenna when the phone is
switched on.
5
Emergency calls
Key in the emergency number for your present location,
then press
.
Keep your phone away from small children
Keep the phone and all its parts, including accessories, out
of the reach of small children.
Accessories and batteries
Use only Samsung-approved accessories and batteries. Use
of any unauthorised accessories could damage your phone
and may be dangerous.
CAUTION:
• The phone could explode if the battery is replaced with an
incorrect type.
• Dispose of used batteries according to the manufacturer’s
instructions.
At very high volume, prolonged listening to a
headset can damage your hearing.
Qualified service
Only qualified service personnel may install or repair your
phone. Failure to do so may invalidate the warranty.
For more detailed safety information, see “Important safety
information” on page 166.
Note: Depending on your country, your phone and accessories
may appear different from the illustrations in this guide.
6
1
Getting started
Congratulations on the purchase of your new Smartphone!
This chapter helps you set up your phone, charge the
phone’s batteries, and familiarise yourself with the different
components of your phone.
What’s in the box?
Your package contains the following items:
Batteries
Phone
PC data cable
CD-ROMs*
Travel charger
Quick reference guide
* One contains Microsoft ActiveSync software, Add-on software and
programs, and the other contains User’s Guide in PDF format.
In addition, you can obtain the following accessories for
your phone from your local Samsung dealer:
• Car charger/adapter
• Standard battery
• Travel charger
• Battery holder
• Bluetooth hands-free car kit
• Straight headset
• PC data cable
• Bluetooth USB dongle kit
• Bluetooth mono &
stereo headset
Note: The items supplied with your phone and the accessories
available at your Samsung dealer may vary, depending
on your country or service provider.
7
Getting started
Rear view
Camera flash
Camera lens
Quick List/
Key Lock key
External speaker
Camera key
Headset jack
Battery cover
Charger/PC data
cable jack
Keys of your phone
Key
Description
• Press to open the Quick List screen.
• Press and hold to lock the keys.
• Press to open the Voice Notes program.
• Press and hold to turn on the camera.
9
Getting started
Key
Description
• Press to adjust the earpiece and speaker
volume.
• Press to mute the call ringer as a call comes
in. Press and hold to reject the call.
Press to perform the command shown on the
screen immediately above the key.
Press to switch to the Home screen from a
program.
• Press to return to the previous screen.
• Press to delete characters in a text input field.
• Press to scroll through a list.
• Press to move the cursor in a text input field.
• Press to confirm your selection or input.
• Press to open the Dialling screen.
• Press to make or answer a call.
• Press and hold to turn the phone on or off.
• Press to end a call.
~
Press to enter numbers and characters.
Press to switch between characters on the
upper half of the keys and characters on the
lower half in a text input filed.
Press to change case in a text input field.
Press to change the text input mode.
10
Getting started
Key
Description
Press and hold to activate or deactivate the
Silent profile from the Home screen.
Press to delete characters.
• Press to confirm your selection or input.
• Press to start a new line in a text input field.
Press to open the Messaging program.
Press to enter a comma in a text input field.
Installing the SIM card
When you subscribe to a cellular network, you are provided
with a plug-in SIM card loaded with your subscription
details, such as your PIN, any optional services available,
and many other details.
• Keep all miniature SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily damaged by
scratches or bending, so be careful when handling the
card.
• When installing the SIM card, always make sure that the
phone is switched off before you remove the battery.
11
Getting started
Inserting the SIM card
1. Remove the battery cover.
2. Insert and slide the SIM card under the two tabs, as
shown, ensuring that the gold coloured contacts of the
card are face down into the phone.
Continue to install the battery. See the next page.
Removing the SIM card
To remove the SIM card, slide the card out of the holder, as
shown.
12
Getting started
Installing the battery
Your phone is powered by a rechargeable Li-ion battery.
Use only approved batteries and chargers.
Installing the battery
1. Remove the battery cover.
2. Insert the battery into the battery compartment, with
the gold-culoured contact toward the top of the phone.
3. Close the battery cover.
13
Getting started
Removing the battery
1. If necessary, switch off the phone by pressing and
holding until the power-off image displays.
2. Remove the battery cover.
3. Lift the battery away from the phone.
Charging your phone
1. Plug the connector of the travel charger into the jack on
the right side of the phone.
2. Plug the travel charger into a standard AC wall outlet.
The LED on the charger will indicate the charging
progress by the following colours:
• Red: the phone is being charged.
• Green: the phone is fully charged.
• Orange: the travel charger is not plugged in correctly.
Check the phone and the charger.
3. When charging is finished, unplug the travel charger
from the power outlet.
14
Getting started
4. Remove the travel charger from the phone by pressing
the buttons on both sides of the connector and pulling
the connector out.
Note: Do not remove batteries while charging. It may cause
malfunctions and may damage the device.
Low battery warning
Your phone displays the Battery Very Low icon ( ) and a
warning message when the battery gets very low. If this
happens, charge the battery.
Turning your phone on or off
Press and hold
to turn on your phone. The phone is
logged into your home network and receives the signal
from the network. You can now make or answer a call
and use programs on the phone.
To turn off the phone, press and hold
.
15
2
The basics
This chapter explains basic information about using your
phone, such as customising your phone and using online
help.
Using the Home screen
When you turn on your phone, the Home screen, the
phone’s idle screen, appears. You can also access this
screen by pressing
from any program.
On the Home screen, you can view important information
for the day or messages at a glance. You can also quickly
switch to the programs you recently accessed.
Status icons indicates
your phone’s current
status. See the next
page.
Quick Launcher:
Select to view
appointments or
messages, or
change the profile
settings.
Press the right soft
key to open
Contacts
.
Press the left soft key to
open the Start menu and
switch to a program.
16
The basics
Status bar
On the top line of the screen, the Status bar displays icons
to show your phone’s current status. Followings are some
of the status icons you may see:
Icon Description
Shows the strength of the signal.
You can also view the following service status:
•
•
: You are out of a service area.
: The phone functions are turned off.
Appears when a call is in progress.
Appears when a data call is in progress.
Appears when the current call is on hold.
Appears when a GPRS connection is available in
the network. When a GPRS connection is active,
appears.
Appears when you are roaming out of your home
service area and logged onto a different GPRS
network.
Shows the level of your battery power. The more
bars you see, the more power you have
remaining.
When the battery level is very low,
appears.
Appears when the ring type has been set to Silent
in the current profile. For details, see page 25.
17
The basics
Icon Description
Appears when the ring type has been set to
Vibrate in the current profile or the ring tone in
Sounds has been set to Vibrate. Also, appears
when the Silent profile is activated. For details,
see page 25.
Indicates that you can make calls using phone
line 1 or 2 only (network service).
Appears when you’re roaming outside of your
home area and logged onto a different network.
Appears when Bluetooth is activated. For details,
see page 144.
Appears when a text (SMS) or multimedia (MMS)
message has been received.
Appears that an instant message has been
received.
Appears when a new voicemail has been
received.
•
•
•
: A new voicemail from line 1.
: A new voicemail from line 2.
: A new voicemail from both lines.
Appears when there is a call you have missed.
Appears when you have set incoming calls to be
diverted to another destination.
18
The basics
Accessing information from the Home
screen
From the Home screen, you can:
• view upcoming appointments
• change the profile option
• view unread text (SMS) or multimedia (MMS) messages
To change information on each item:
1. On the Home screen, scroll to the item you want to
change by pressing the Navigation keys and press
.
2. Access appointments or messages, or change the profile
setting.
For more information on changing these items, see
the appropriate instructions for each task in this
guide.
3. Press
or
to return to the Home screen.
19
The basics
Customising the Home screen
You can customise the Home screen according to your
preferences.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
Display
→
Home Screen.
3. Press the Up or Down key to scroll to an option and then
Left or Right key to change the setting.
The following options are available:
•
•
•
•
Home screen layout: Select the layout to be used for
the Home screen.
Colour scheme: Select the colour scheme to be used
for the Home screen.
Background image: Select an image to use as a
background image on the Home screen.
Time out: Specify the length of time the phone waits
before returning the display to the Home screen if the
phone is not used.
4. When you have finished, press the Done soft key.
Start menu screen
On the Start menu, you can access all of the programs for
your phone. From the Home screen, press the Start soft
key to open the Start menu screen.
You can change the start menu type. Press the Start soft
key, and select Settings
→
Display
→
Start Menu Style.
Then select Grid or List
.
20
The basics
Opening programs or folders
Scroll to a progarm or a folder by pressing the Navigation
keys and press to open it. You can also press the
number key assigned to the program you want.
Switching between programs
Your phone is a multi-tasking product. You can run multiple
programs at the same time and switch from one program
to another. From any application, press
to the Home screen. Then access another one from the
Quick Launcher or Start menu
or
to swich
.
Note: When you use a GPRS connection, pressing
terminates the connection. If you want the current
connection to continue, press
, or
as many
times as necessary, to switch to the Home screen.
Closing programs
Using Task Manager, you can end the programs which are
currently open.
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories and then More soft key, press the
Task Manager
.
3. Scroll to a program, press the Stop soft key. To close all
of the running programs, Press the Menu soft key and
select Stop All
.
21
The basics
Entering text
Your phone is equipped with a QWERTY keypad to support
easy and quick text input. You can enter text as you would
when using a computer’s keyboard.
The keys are labelled with alphabet on the lower half and
numbers and symbols on the upper half. Press the key
corresponding to the character you want to enter. To switch
between the upper characters and lower characters, press
.
You can move the cursor by pressing the Navigation keys.
To delete a character, press
.
In addition, you can use the following function keys:
•
•
•
•
: deletes characters.
: starts a new line.
: changes case or switches to Capital Lock mode.
: changes the text input mode. You can switch between
ABC mode and T9 mode in which displays the word
choices for your key presses. 123 mode and Symbol
mode are also available for entering numbers and
symbols.
•
: switches to 123 mode.
22
The basics
Customising your phone
You can customise the phone settings to suit the way you
work.
Regional settings
Using Regional Settings, you can change number,
currency, and time and date formats appropriate to the
countries in question.
1. On the Home screen, press the Start soft key.
2. Select Settings
Settings
→
More...
→
More...
→
Regional
.
3. Select the option you want in each field.
4. When you have finished, press the Done soft key.
5. If you changed the Language or Locale option, press
the OK soft key.
Then you need to turn the phone off and then back on to
make your changes take effect.
Time and date settings
The Date and Time setting enables you to set the date,
time, and time zone.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
Clock & Alarm
→
Date and Time.
Note: By using Alarm on the Clock & Alarm screen, you can
set alarms to ring at a specified time.
23
The basics
3. Set your time zone and the current date and time.
4. When you have finished, press the Done soft key.
Note: You can change the time and date format to be
displayed in Regional Settings
.
Power settings
You can conserve battery power by adjusting the time-out
settings for the display and the backlight of the keypad and
display or adjusting the display brightness.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Power Management.
3. Select the power settings:
•
•
Main battery: You can check the remaining battery
power.
Backlight time out: You can select the length of time
the backlight stays on. A backlight illuminates the
display and the keypad. When you press any key, the
backlight turns on and remains on for the backlight
time out period.
•
•
Display time out: You can select the length of time
the display stays on. During standby, the phone goes
to Sleep mode after a specified period of time, so very
little power is being consumed.
Display Brightness: You can adjust the brightness
for the display.
4. When you have finished, press the Done soft key.
24
The basics
Accessibility settings
You can configure the options to increase the accessibility
to your phone’s functions.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
More...
→
Accessibility.
3. Select the options you want.
•
•
•
System font size: You can set the size of the font on
your screen.
Confirmation time out: You can set the delay before
an unconfirmed action times out.
In-call alert volume: You can set the volume of the
alert tone that sounds when you are on a call.
4. When you have finished, press the Done soft key.
Sound settings
You can customise sound settings for various events
happening on the phone.
Setting sounds and notifications
Your phone reminds you in various ways when you have
something to do, receive a message, or press the keys on
the phone.
For example, if you have set up an appointment, you are
notified in any of the following ways:
• A sound, which you can specify, plays,
• The LED indicator flashes, or
• Your phone vibrates.
You can change phone sounds by choosing types or sounds
for each event.
25
The basics
1. On the Home screen, press the Start soft key.
2. Select Settings Sounds
→
.
3. Select the event for which to specify a sound.
4. Select the reminder type or ringtone.
5. When you have finished, press the Done soft key.
Notes
:
• You can connect to the Internet and then download ringtones
that are in a .wav or .mid format.
• To use an .mp3 or .wma file as your call ringtone, it must be
saved in a folder in Storage, Storage Card or My Documents.
Changing the sound profile
Using Profiles, you can adjust and customise the phone
tones for different events or environments and then apply
the settings as a group. The currently selected profile
displays on the Home screen.
To change profiles:
1. On the Home screen, press the Start soft key.
2. Select Settings
→
Profiles. The list of profiles opens.
3. Select the profile you want.
If you select Automatic, the profile will automatically
switch between Normal and Meeting according to your
calendar items.
Notes
:
• You can quickly change the profile. Press
profile you want from the Quick List.
and select the
• You can quickly activate or deactivate the Silent profile by
pressing and holding from the Home screen.
26
The basics
To customise profiles:
1. On the Profiles screen, scroll to the profile you want.
2. Press the Menu soft key and select Edit
.
3. Change the settings in each field. Available options may
differ depending on the selected profile.
4. When you have finished, press the Done soft key.
Notes
:
• To change all profile settings to their factory default, press
the Menu soft key from the profile list and select Reset to
default
.
• For the Headset profile, when you set the ring type to Silent
or Vibrate, you must manually answer calls even if the
Auto-answer in option is activated.
Owner information
Owner Information identifies the owner or user of the
phone. Set your contact information in case you have lost
the phone.
1. On the Home screen, press the Start soft key.
2. Select Settings
Information
→
More...
→
More...
→
Owner
.
3. Fill in each input field.
To attach notes, enter notes in the Notes field.
4. When you have finished, press the Done soft key.
27
The basics
USB function setting
You can select how the phone functions when connected to
a computer via the USB port.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Connections
→
USB.
3. Select one of the following functions for USB
connections:
•
ActiveSync: Select this option if you want the phone
to communicate with ActiveSync.
•
Mass Storage: The phone is perceived as an external
memory device.
4. Press the Done soft key.
Error reporting setting
Your phone has the Error Reporting function which informs
you of errors in a program that can give a crash to the
phone system. You can enable or disable this function.
1. On the Home screen, press the Start soft key.
2. Select Settings
Reporting
→
More...
→
More...
→
Error
.
3. Select Enable or Disable and press the Done soft key.
28
The basics
Security settings
With options in Security, you can protect your phone and
SIM card from unauthorised use.
Locking the phone
You can protect your phone using the Device Lock feature.
Once the feature is enabled, your phone is automatically
locked after the specified period of inactivity.
Note: Even if the phone is locked, you will be able to receive
calls.
To lock the phone:
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Security
→
Device Lock.
3. Select Prompt if device unused for and select a
length of time the phone waits for before locking itself
when it is not in use.
4. Scroll to the Password type field and select a password
type.
•
Simple PIN: Use the PIN code supplied with the SIM
card.
•
Strong alphanumeric: Use an alphanumeric
password. A password must be more than 7 characters
and contain at least 3 of uppercase and lowercase
letters, numbers, or punctuation marks.
5. Enter a password in the Password field.
6. Re-enter the same password in the Confirm password
field for confirmation.
29
The basics
7. Press the Done soft key.
8. Press the Yes soft key.
Note: You can also manually lock the phone by pressing
and selecting Device lock from the Quick List.
To unlock your phone:
1. On the Home screen, press the Unlock soft key.
2. Enter the password and press the Done soft key.
Activating the SIM PIN
When SIM PIN is enabled, you must enter your PIN
supplied with your phone each time you turn the phone on
or insert the current SIM card into another device.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
1. On the Home screen, press the Start soft key.
2. Select Settings
PIN
→
More...
→
Security
→
Enable SIM
.
3. Enter the PIN and press the Done soft key.
Locking the SIM card
When SIM Lock is enabled, your phone works only with the
current SIM card. To use another SIM card, you must enter
the SIM Lock password.
1. On the Home screen, press the Start soft key.
2. Select Settings
Lock
→
More...
→
Security
→
Enable SIM
.
30
The basics
3. Enter a password for your SIM card, and re-enter the
password for confirmation.
4. Press the Done soft key.
Changing PIN2
A PIN 2 is used for certain functions supported by the SIM
card. You can change the PIN2 supplied with your SIM card
to a new one.
1. On the Home screen, press the Start soft key.
2. Select Settings
PIN2
→
More...
→
Security
→
Change
.
3. Enter the current PIN2, then a new PIN2, and re-enter
the new one for confirmation.
4. Press the Done soft key.
Changing the call barring Password
You can change the default call barring password supplied
by your service provider.
1. On the Home screen, press the Start soft key.
2. Select Settings
Password
→
More...
→
Security
→
Call Barring
.
3. Enter the current password, then a new password, and
re-enter the new one for confirmation.
4. Press the Done soft key.
31
The basics
Menu shortcut settings
The number keys can be used as shortcut keys to directly
access specific programs that exist in the Start menu.
Note: You can also assign phone numbers, e-mail addresses,
or web pages in Contacts to the number keys as speed
dial entries. For details about setting the speed dial list,
see page 57.
Assigning a shortcut to a key
1. On the Home screen, press the Start soft key.
2. Scroll to the program you want to assign to a key.
3. Press the Menu soft key and select Add Speed Dial
.
4. If necessary, enter the name you want in the Name
field.
5. Select a location in the Keypad assignment field and
press the Done soft key.
Note: Up to 99 locations are available. Locations 0 and 1 are
reserved for the international call prefix “+” and the
voicemail centre number, respectively.
Accessing a menu using its shortcut
On the Home screen, use one of the following ways:
• For one-digit shourtcut keys, press and hold the number
key.
• For two-digit shortcut keys, press the first number key
and then press and hold the last number key.
32
The basics
Note: To ensure that operations, such as moving or saving
files, proceed to completion, wait at least 50 seconds
before removing the battery.
Locking the keys
You can lock the keys on the phone to keep any accidental
key presses from causing a program’s launch or phone
switch on or off.
To lock the keypad, press and hold , or press
and
select Key lock on the Quick List.
To unlock the keypad, press the Unlock soft key, and then
press
.
Using the Program Launcher
Using the Program Launcher, you can view the programs in
the Start menu categorised by type, and quickly access
the program you want.
To open the Launcher:
Press and hold
the Start soft key and then the More soft key, and select
Accessories Program Launcher
on the Home screen. You can also press
→
.
Opening a program
1. On the Launcher screen, press the Group soft key and
select the group you want.
2. Select the program you want.
33
The basics
Moving a program within a group
1. On the Launcher screen, scroll to the program you want
to move.
2. Press the Menu soft key and select Move
.
3. When the selected program blinks, move the program to
the position you want by pressing the Up or Down key.
4. Press the Done soft key.
Managing groups
You can create new groups or delete the groups, or change
the order of the group list.
1. On the Launcher screen, press the Menu soft key and
select Edit Group
.
2. Press the Menu soft key to access the following options:
•
•
•
New: allows you to add a new group.
Delete: allows you to delete the selected group.
Rename: allows you to change the name of the
group.
•
Move: allows you to move the position of the group.
3. When you have finished, press the Done soft key.
34
The basics
Using an optional memory card
Your phone has an expansion slot compatible with micro SD
memory cards, which are primarily used to back up or
transfer files and data.
Note: Use only compatible memory cards with your phone.
Using incompatible memory cards, such as Secure
Digital (SD) cards, may damage the card, as well as the
phone, and data stored on the card.
Inserting the memory card
1. Turn off the phone and remove the battery cover and
the battery.
2. Push the memory card into the slot until it clicks into
place. The card is secure when it is not protruding from
the phone
.
3. Install the battery into place and close the battery cover.
35
The basics
Removing the memory card
To remove the card, push it in and release so that it is
disengaged from the slot. Then slide the card out.
Adding and removing programs
You can install any program created for your phone, as long
as the phone has enough memory. The most popular place
(http://www.microsoft.com/mobile/smartphone).
Adding programs using ActiveSync
You can install programs downloaded from the Internet or
included on the supplied software CD-ROM by performing
synchronisation between your phone and your computer.
First you need to determine what your phone and
processor type is so that you know which version of the
software to install.
1. On the Home screen, press the Start soft key and select
Settings
→
More...
→
More...
→
About. Check the
version of your phone.
36
The basics
2. Download a program to your computer from the
Internet or insert the CD-ROM that contains the
program into your computer.
Be sure to select the program designed for the phone
and your phone’s processor type.
3. Read any installation instructions, Read Me files, or
documentation that comes with the program.
4. Connect your phone to your computer and make sure
that the ActiveSync is activated.
For more information on ActiveSync, see page 42.
5. Double-click the *.exe file on the computer.
If the file is an installer, the installation wizard will
begin. Follow the instructions on the screen. Once the
software has been installed, the installer will
automatically transfer the software to your phone.
If the file is not an installer, you will see an error
message. You need to move this file to your phone by
using ActiveSync Explore to copy the program file to the
Start Menu folder on your phone.
Once installation is completed, you can view and open the
program by accessing the Start menu.
Adding a program directly from the
Internet
First, you need to determine what your phone and
processor type is so that you know which version of the
software to install.
1. On the Home screen, press the Start soft key and select
Settings
→
More...
→
More...
→
About. Check the
version of your phone.
37
The basics
2. Download the program to your phone straight from the
Internet using Internet Explorer.
Be sure to select the program designed for the phone
and your phone’s processor type.
3. Read any installation instructions, Read Me files, or
documentation that comes with the program.
4. Select the file, such as a *.xip or *.exe file. The
installation wizard will begin.
5. Follow the directions on the screen.
Once installation is completed, you can view and open the
program by accessing the Start menu.
Removing programs
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Remove Programs.
3. Select the program you want to delete.
4. Press the Menu soft key and select Remove
.
5. Press the Yes soft key to confirm the deletion.
6. When you have finished, press the OK soft key.
38
The basics
Managing certificates
On your phone you can add and delete public key
certificates. You can store the following two types of
certificates on your phone.
•
Personal: help to establish your identity, when you log
on to a secured network, such as a corporate network.
•
Root: help to establish the identity of servers with which
you connect. This helps to prevent unauthorised users
from accessing your phone and information.
Viewing certificates
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Security
→
Certificates
→
a certificate type.
3. To view more details, select the certificate.
Deleting a certificate
1. Scroll to the certificate you want on the list.
2. Press the Menu soft key and then select Delete
3. Press the Yes soft key to confirm the deletion.
.
39
The basics
Resetting your phone
You can reset your phone’s settings and clear all added
data from memory.
Resetting the phone
1. On the Home screen, press the Start soft key
2. Select Settings
Hard reset. You can also turn on the phone with
pressing and holding
→
More...
→
Security
→
More...
→
.
3. Enter the initialisation password and press the Done
soft key. The default password is “1234.”
4. Press the Yes soft key to confirm.
The phone resets and reboots itself.
Changing the initialisation password
You can change the initialisation password to prevent the
phone from being reset by unauthorised people.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Security
→
More...
→
Hard reset password
.
3. Enter the old password, then a new password, and
re-enter the new one for confirmation.
4. Press the Done soft key.
40
The basics
Using online help
Your phone is supported by additional information available
online, or on the CD-ROM that came with your phone.
For information on:
see:
additional programs
the supplied CD-ROM.
that can be installed on
your phone,
connecting to and
synchronising with a
PC,
Chapter 3 in this User’s Guide
or ActiveSync Help on your PC.
To view the ActiveSync help,
click the ActiveSync icon on the
Windows task bar.
up-to-date information http://www.microsoft.com/
SIM AT (SIM Application Toolkit)
This is available if you use a SIM AT card that provides the
SIM Application Toolkit menus and additional services, such
as news, weather, sports, entertainment, and location
services. Available services may vary, depending on your
service provider’s plans.
For details, see your SIM card instructions or contact your
service provider.
41
3
Synchronisation
Using Microsoft® ActiveSync®, you can synchronise data on
your desktop computer with the data on your phone.
Synchronisation compares the data on your phone with
your desktop computer and updates both your phone and
computer with the latest data.
With ActiveSync, you can:
• Keep Contacts, Calendar, Tasks, or Inbox data up-to-date
by synchronising your phone with Microsoft Outlook data
on your desktop computer.
• Copy (rather than synchronise) files between your phone
and desktop computer.
• Control the moment when synchronisation occurs by
selecting a synchronisation mode.
• Select data types to be synchronised and control the
amount of synchronised data.
WARNING!
• ActiveSync synchronises two devices using the latest data.
Therefore, if you delete some specific data from the phone
after synchronisation, and then perform a synchronisation
again, the corresponding data on the computer will be
deleted. Be careful not to lose important data.
• If you turn off the phone after copying files to any folders,
except for the Storage folder, using ActiveSync, all files in
those folders will be deleted. Store important files in the
Storage folder to prevent from being deleted.
42
Synchronisation
Installing ActiveSync
Before beginning synchronisation, you must install
ActiveSync on your desktop computer using the supplied
ActiveSync from the Microsoft web site (http://
www.microsoft.com).
1. Insert the CD-ROM into the CD-ROM drive of your
desktop computer. Alternatively, double-click the
downloaded ActiveSync installer.
2. Follow the instructions on the screen for installing
Microsoft ActiveSync.
When installation is completed, the Synchronisation
Setup Wizard helps you to connect your phone to your
desktop computer, to set up a partnership.
3. Follow the instructions on the screen.
Note: See page 45 for more information on connecting the
phone and a computer.
Your first synchronisation process will automatically begin
when your phone is connected to the computer. After the
first synchronisation, take a look at Contacts, Calendar, and
Tasks on your phone. You will notice that your information
has been copied to the phone.
43
Synchronisation
Customising connection settings
To establish a connection between your computer and the
phone, you must enable the connection(s) you want to use
in the ActiveSync program. By default, all connections are
enabled.
1. From the ActiveSync window on your computer, select
File
→
Connection Settings...
2. Change the connection settings.
If your phone is not
connected to the
computer, click this
button to establish
a connection.
3. Click OK
.
44
Synchronisation
Connecting your phone to a
computer
To connect the phone to your computer, you can use a PC
data cable or the infrared port.
Connecting with a PC data cable
Connect one end of the PC data cable to the charger/PC
data cable jack on the right of the phone and the other end
to the USB port on your computer.
Note: USB mode of your phone must be set for ActiveSync.
Press the Start soft key and select Settings
→
More...
→
Connections
→
USB. Then change the
mode.
The connection is established and the Microsoft ActiveSync
window appears. The synchronisation automatically begins.
Note: When an error occurs in a USB connection, activate the
DHCP Client service, or deactivate the firewall or VPN
environment.
Connecting via the infrared port
1. Enable IR transmissions on your phone; Select Start
Settings More... Connections Beam
Receive incoming beams
→
→
→
→
→
.
2. Align the infrared ports on your phone and the
computer.
Note: To use the infrared port, the phone’s display must be
activated.
45
3. From the Connection Settings window of the Windows
ActiveSync, select Infrared Port (IR)
.
Synchronisation
4. On the Home screen, press the Start soft key and then
the More soft key, and select ActiveSync
.
5. Press the Menu soft key and select Connect via IR
.
Once the connections is established,
Windows task bar.
appears on the
Note: If your computer doesn’t have an infrared port, you can
purchase a USB-IrDA adapter.
Synchronising information
To start synchronisation, connect your phone to your
computer. For more information on connecting the phone
and the computer, see page 45. The ActiveSync screen on
your computer automatically appears and synchronisation
starts.
Shows the
synchronisation
status.
Shows types of
information to be
synchronised.
Once the synchronisation is completed, the phone stays
connected to the computer. If any change is made,
ActiveSync automatically will begin synchronisation. To
begin synchronisation, press the Sync soft key in
ActiveSync on your phone.
You can open the phone’s file directory by clicking Explore
from the Microsoft ActiveSync window. You can then copy 46
files quickly and easily from the phone to the computer or
vice versa.
Synchronisation
Note: To synchronize Bluetooth devices with a compatible PC,
you need the Bluetooth stack for Windows XP Service
Pack 2 on your PC.
Customising synchronisation
settings
You can customise various setting options for
synchronisation with a computer and a server, and set the
synchronisation schedule.
First, you must break the connection between the phone
and computer. Disconnect the PC data cable or remove the
phone from the infrared range.
Changing PC Settings
1. In ActiveSync on your phone, press the Menu soft key
and select Options
.
2. Highlight Window PC.
3. Press the Menu soft key and select Settings
.
4. Change the computer name, set how to handle a data
conflict between the phone and computer, or set a event
logging type and press the Done soft key.
5. Select data types to be synchronised under the selected
computer.
6. Press the Done soft key.
Note: For more information on the conditions that must be
met on the computer and how to change
synchronisation options, see ActiveSync Help.
47
Synchronisation
Setting server synchronisation
You can synchronise information automatically as items
arrive only if your company is running Microsoft Exchange
Server with Exchange ActiveSync.
Configuring an Exchange Server connection
1. In ActiveSync on your phone, press the Menu soft key
and select Add Server Source
.
2. Enter the server address and select This server
requires an encrypted (SSL) connection to use a
SSL protocol for server access.
3. Press the Next soft key.
4. Enter your Microsoft Exchange user name, password,
and domain name.
To save the password for subsequent accesses, select
Save password
.
5. Press the Next soft key.
6. Select data types to be synchronised.
7. When you have finished, press the Finish soft key.
Changing the synchronisation schedule
You can schedule synchronisation with the Microsoft
Exchange Server on two separate times. Use the peak time
schedule to synchronise during working hours or other
times when you experience higher mail volumes. Use the
off-peak time schedule to synchronise during times when
you experience lower mail volumes.
48
Synchronisation
1. In ActiveSync on your phone, press the Menu soft key
and select Schedule
.
2. Set each option:
• To synchronise periodically during peak times, select a
frequency of synchronisation in the Peak times field.
• To synchronise periodically during off-peak times,
select a frequency of synchronisation in the Off-peak
times field.
• To use the peak time and off-peak time setting while
roaming, select Use above settings when roaming
.
• To synchronise each time you send an e-mail, select
Send outgoing items immediately
• To set the days and hours for peak times, press the
Menu soft key and select Peak Times
.
.
3. When you have finished, press the Done soft key.
49
4
Call functions
This chapter explains all of the call- functions provided by
your phone.
Turning the phone functions on and
off
You can choose to turn off the phone functions and just use
the PDA functions at any time and then turn it back on
when you want.
Note: In many countries you may be required by law to turn
off the phone functions while on a flight. To turn off the
display of your phone does not actually turn off the
phone functions; you must turn off your wireless
connection to your operator’s network.
To turn off the phone functions, press
and select
Wireless Manager. Then select Phone to set it to Off
.
appears on the top right corner of the screen.
To turn back on the phone functions, select Phone to set it
to On from the Wireless Manager screen.
50
Call functions
Using the Dialling screen
When you start entering a number or press
, the Dialling
screen opens. You can view the most recent calls you have
dialled, received, and missed on the screen.
When you enter a digit, the Dialling screen lists all of the
History, as well as the phone number assigned to the
corresponding Speed Dial key.
Making a call
You can make a phone call using the number keypad.
1. From the Home screen, enter a number including an
area code using the keypad.
2. Press
to make a call.
When a call is connected, the call duration displays.
During a call, you can use several call options. For
details, see page 55.
To adjust the earpiece volume during a call, press
to increase or decrease the volume level.
3. To end the call, press
.
Advanced calling features
You can make a call from Contacts, Speed Dial, and Call
History.
51
Call functions
Making a call from Contacts
1. On the Home screen, press the Contacts soft key. You
can also press the Start soft key and select Contacts
.
2. Select a contact card from the contact list.
3. Scroll to the number you want and press
.
Making a call from Speed Dial
Speed Dial is a list you can create of often-dialled numbers.
Information on adding a number to Speed Dial is detailed
on page 57.
By memorising the position on the Speed Dial list, you can
dial the number simply by entering that number of the
Speed Dial key. The phone number assigned to the key
appears on the Dialling screen.
Alternatively, if you do not remember the position of a
number, access the Speed Dial list:
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories
→
Speed Dial.
3. Scroll to the number you want and press
.
52
Call functions
Making a call using name dialling
You can make a phone call by saying the name that has
been assigned to a contact card in Contacts or on the SIM
card. For details, see page 129.
Making a call from the Call History
1. On the Home screen, press the Start soft key.
2. Select Call History. The recent call list appears.
Note
:
is for incoming calls,
is for missed calls.
is for outgoing calls, and
To view the calls categorised by call type, press the
Menu soft key, select Filter, and select a category from
the pop-up list.
3. Scroll to the number you want and then press
.
Making an international call
1. Press and hold
until the
+
sign appears. The
+
replaces the international access code.
2. Enter the full phone number you want to dial. It includes
the country code, the area code (without the leading
zero), and the phone number.
3. Press
.
Note: You can set the country or are code to be added before
the number when dialling. See page 62.
53
Call functions
Making an emergency call
Your phone provides the emergency number 112. This
number can normally be used to make an emergency call in
any country, with or without a SIM card inserted, if you are
within a mobile phone network’s service area.
Enter the emergency number 112 and press
.
Notes
:
• Some service providers may require a SIM card to be
inserted, and in some cases the PIN to be entered as well.
• In some cases, other emergency numbers may also be
accessed. Your service provider may save additional local
emergency numbers on the SIM card.
Answering or ignoring a call
When a call comes in and the phone rings or vibrates,
depending on the ringer setting:
• Press the Answer soft key or press
to answer the
call.
• Press the Ignore soft key or press
to reject the call.
You can also press and hold
.
Note: If you reject a call, the busy tone is sent out.
Depending on your service provider, the caller may be
guided to your voicemail server.
54
Call functions
Options during a call
Your phone provides a number of control functions that you
can use while a call is in progress.
Putting a call on hold
If a person is trying to call you when you are talking on the
phone, a notification window will pop out.
1. Press the Answer soft key to answer the second call
and put the first on hold.
2. To swap back and forth between the two callers, press
the Swap soft key.
3. To end the second call and go back to the first, press the
End soft key or press
.
Setting up conference calling
Conference calling enables you to invite callers during a call
and have a conversation with up to 5 people at the same
time.
1. Put a call on hold, dial a second number, and wait for it
to be picked up. Alternatively, accept a second incoming
call when you already have one in progress.
2. Press the Menu soft key and select Conference
.
If the conference connection is successful, the word
“Conference” will appear at the top of the screen.
3. Press the Menu soft key and select Hold to place the
conference call on hold and make a new call or
answer another incoming call.
55
Call functions
4. Press the Menu soft key and select Conference to
join together all existing calls
.
To talk privately to a person during a conference call, press
the Menu soft key and select Private. When the list of call
participants appears, select one.
Switching a call to a Speakerphone
During a call, you can switch to a speakerphone.
In Speakerphone mode, a noisy enviroment will make it
difficult to hear the person whom you are speaking with. In
a noisy environment, it is better to use the normal phone
mode for better audio performance.
• To activate a speakerphone, press and hold
1 seconds.
for about
• To deactivate a speakerphone, press and hold the key
again for the same length of time.
Call-related features
Checking your voicemail
The first speed dial location is assigned to your voicemail
box by default. When you insert your SIM card into the
phone, it will automatically detect and set as default the
voicemail centre number of your mobile service provider.
To check your voicemail, press and hold
Dialling screen.
from the
Note: You can check and change the voicemail centre number.
See page 62.
56
Call functions
Managing the Speed Dial list
You can assign frequently-used phone numbers, e-mail
addresses, or web pages in Contacts to the speed dial
location 2 through 99. The location 0 and 1 on the Speed
Dial list is preset for the international call prefix + and the
voicemail centre number, respectively.
Note: You cannot create a speed dial for a phone number
stored on the SIM card.
Adding a contact to the Speed Dial list
1. On the Home screen, press the Contacts soft key. You
can also press the Start soft key and select Contacts
.
2. Select a contact from the list.
3. Scroll to a number, e-mail address, or web page
address.
4. Press the Menu soft key and select Add to Speed Dial
5. If necessary, enter the name you want.
6. In the Keypad assignment field, select a location.
7. Press the Done soft key.
.
Deleting Speed Dial assignments
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories
→
Speed Dial.
3. On the Speed Dial list, select a number.
57
Call functions
4. Press the Menu soft key and select Delete
.
5. When the confirmation message appears, press the Yes
soft key.
Managing your Call History
Call History details all incoming, outgoing, and missed
calls, and also provides a summary of total calls. It can also
tell you when a call was initiated and how long it lasted.
To open the Call History:
On the Home screen, press the Start soft key and select
Call History. A list of all calls appears.
If necessary, select the category of the call history to be
displayed by pressing the Menu soft key and selecting
Filter
.
Calls are categorised as below:
•
No Filter: shows all calls made to and from the phone in
chronological order.
•
•
•
Missed Calls: shows only calls that were not answered.
Incoming Calls: shows only calls made to the phone.
Outgoing Calls: shows only calls made from the phone.
Viewing details of calls
• To view the duration of a call and time and date you
received or made it, scroll to the call you want to view
and press
• To view contact information, scroll to a contact, press the
Menu soft key, and select Find Contact
• To send an SMS message, press the Menu soft key and
select Send SMS
.
.
.
58
Call functions
• To send an e-mail message using the e-mail address on
the call history, scroll to the contacts, press the Menu
soft key, and select Email
.
• To delete individual calls, press the Menu soft key, and
then select Delete. To delete all calls, select Delete List
.
• To save a phone number in a call to Contacts, scroll to
the call you want and press the Save soft key.
Viewing call timers
In Call History, you can view the duration of your calls. This
option is convenient for estimating your usage.
1. On the Call History screen, press the Menu soft key and
select View Timers
.
You can view the total call time, the last call time, the
time of calls you received and made, and a lifetime
counter. You can also view the time you reset the call
time.
2. Press the Done soft key.
You can easily erase the call time records at any time,
except for Lifetime calls, by pressing the Menu soft key
and selecting Reset Timers
.
Viewing call cost
This network feature lets you view the cost of calls. Viewing
call cost may not be available, depending on particular SIM
cards. For more information, contact your service provider.
1. On the Call History screen, press the Menu soft key and
select Call Cost
.
59
Call functions
2. Select the option you want.
•
Last Call Cost: shows the cost of the last call you
made.
•
Total Cost: shows the total cost of all calls made
since the cost counter was last reset. If the total cost
exceeds the maximum cost set in the Set Max Cost
option, you can no longer make any calls until you
reset the counter.
•
Max Cost: shows the maximum cost set in the Set
Max Cost option.
•
•
Reset Counters: allows you to reset the cost counter.
Set Max Cost: allows you to enter the maximum cost
that you authorise for your calls. Calls can be made as
long as the preset max cost is not exceeded.
•
Price/Unit: allows you to set the cost of one unit. This
price per unit is applied when calculating the cost of
your calls.
3. When you have finished, press the Done soft key.
Customising your phone functions
You can personalise the settings of the phone functions, the
services you have, and the network to which you have
connected.
Accessing the Phone setting options
1. On the Home screen, press the Start soft key.
2. Select Settings
→
Phone.
3. Select a setting menu, and then set each option.
60
Call functions
4. When you have finished, press the Done soft key.
Available setting options
•
•
Band Selection: This option allows you to select the
network band in which your phone will operate. Your
phone can operate in the GSM 900/1800 or PCS 1900
band.
Call Barring: This network service allows you to restrict
your incoming or outgoing calls. To set up this service,
you need to enter the call barring password obtained
from your service provider.
All calls: No calls can be made or received.
When roaming: Calls cannot be received when you are
using your phone outside of your home service area.
Off: Call barring is deactivated; all calls can be made and
received normally.
Int's except home: When abroad, calls can be made
only to number within the current country and to your
home country.
Int'l calls: International calls cannot be made.
•
Call Forwarding: This network service allows you to
forward your incoming calls to another phone number.
Unconditional: All calls are forwarded.
No Reply: Calls are forwarded when you do not answer.
Busy: Calls are forwarded when you are on the phone.
Unavailable: Calls are forwarded when your phone is
turned off or your phone is out of the service area.
Data Calls: All data calls are forward.
61
Call functions
•
Call Options: You can customise settings related to call
functions, such as an answering option, voicemail and
SMS access numbers, and auto dial codes.
Any key answer: When this option is activated, you can
answer incoming calls by pressing any key, except for
,
,
, and
.
Show SIM contacts: With this option is activated, the
contact cards stored on the SIM card display on the
contact list.
Phone number: Check your phone number.
Voice mail number/SMS service centre: When you
insert your SIM card into your phone, it automatically
detects and sets your voicemail and SMS access numbers
by default. If not, you can manually enter the numbers
obtained from your service provider.
Country code/Dialling code: You can enter a country
code or area code. The code will be automatically added
before a phone number when dialling.
•
•
Call Waiting: This service allows you to receive another
call while you have a call in progress. Select Provided
call waiting call notifications to activate this service.
Caller ID: When you place a call, your phone number
can be displayed to or hidden from the person to whom
you are calling. Using this option, you can enable or
disable the display of your caller identification.
For more detailed information , press the Start soft key
and then Select Settings Phone More...
→
→
.
•
Channels: This option allows you to set the cell
broadcast (CB) message receipt and set up broadcast
channels from which you want to receive CB messages.
Enable channels: Select to enable the receipt of CB
messages.
62
Call functions
Language: Select your preferred languages to display
CB messages.
To edit the channel list, press the Menu soft key and
select Edit Channels. Then press the Menu soft key and
select the options for adding, editing or deleting
channels.
•
•
Extra Tones: You can activate or deactivate the connect
tone, which alerts you when your call is connected to the
system, or the minute minder tone, which alerts you
every minute during a call.
Fixed Dialling: When this option is activated, your
phone allows outgoing calls only to the limited set of
phone numbers. You can call only those numbers that are
included in the Fixed Dialling Number list or which begin
with the same digit(s) as a phone number on the list.
•
Networks: You can set the phone to automatically select
a network when you are roaming out of your service
area, or find and select the network you want.
Press the Menu soft key to access the following options:
Find a New Network: Search for all available networks.
You can start searching when the phone is out of your
service area.
Select a Network: Select a network from the available
networks
Preferred Networks: Set up a list of your preferred
networks. You can set priority of the networks or add
networks manually by selecting them from the preset
network list or entering their service ID codes.
63
5
Messaging, Internet, and
Messenger
Messaging
In Messaging, you can create, send, receive, view, edit, and
organise:
• Text messages (SMS)
• Multimedia message (MMS)
• E-mail messages
To open Messaging:
On the Home screen, press the Start soft key and select
Messaging
.
Working with SMS or MMS messages
You can write an SMS message of up to 160 characters.
When you enter more than 160 characters, your phone
handles the message as a multi-part message.
You can also send or receive multimedia messages (MMS).
In addition to the familiar text content of text messages,
multimedia messages can contain images, video clips,
audio clips, and combinations of these things in more than
one page.
MMS also supports e-mail addressing, so that messages
can be sent from phone to e-mail and vice versa.
64
Messaging, Internet, and Messenger
Creating and sending an SMS message
1. On the Messaging main screen, select SMS/MMS
2. Press the New soft key and select SMS
.
.
3. In the To field, enter the recipients’ phone numbers,
separating them with a semicolon.
You can retrieve numbers from the contact list by
pressing the Menu soft key and selecting Add
Recipient
.
4. Press the Down key and compose your message.
To enter preset or frequently used messages, press the
Menu soft key, select My Text, and select a message.
5. Press the Send soft key when you’ve finished the
message.
Creating and sending an MMS message
1. On the Messaging main screen, select SMS/MMS
2. Press the New soft key and select MMS
3. In the To Cc, or Bcc field, enter the recipients’
.
.
,
numbers or addresses, separating them with a
semicolon.
Note: The Cc or Bcc fields are above the To field.
You can also retrieve numbers or the addresses from the
contact list or the messages you have sent by pressing
the Menu soft key and selecting Add Recipients
.
65
Messaging, Internet, and Messenger
4. Press the Down key to move to the Subject field and
enter the message subject.
5. Press the Down key and enter the message text.
6. Press the Menu soft key to access the following options
for composing a message:
•
Preview: shows the multimedia message you
created.
•
Add Recipients: allows you to add recipients
addresses.
•
•
Edit Item: allows you to edit the selected item.
Add: allows you to add a variety of contents, such as
data, media files and templates.
•
•
•
Attach: allows you to attach a contact card or
calendar item as a digital file format, or a media file.
Edit Page: allows you to add or delete pages, change
the text style, or set the page order or duration.
Save to: allows you to save the message to Drafts or
as an MMS template.
•
•
Cancel Message: cancels sending the message.
MMS Options: allows you to change the message
options. See page 70.
7. When you have finished composing the message, press
the Send soft key.
66
Messaging, Internet, and Messenger
Viewing SMS/MMS messages
When you receive a new SMS or MMS message, the New
Message icon ( ) displays on the top line of the screen
and a new message is stored in Inbox. Press the Message
soft key to open the message.
You can also view messages you received, sent, composed
but not sent by accessing the message folders.
To open the message folders:
On the SMS/MMS screen, press the Menu soft key and
select Folders. The following default folders display:
•
Deleted Items: contains messages that have been
deleted on your phone.
•
•
•
Drafts: stores draft messages that have not been sent.
Inbox: contains received messages.
Outbox: is a temporary storage place for messages
waiting to be sent.
•
Sent Items: stores the messages that have been sent.
To view all message folder contents, press the Menu soft
key and select Show All Folders
.
To clear the SMS/MMS messages in a specific folder, scroll
to the folder, press the Menu soft key, and select Clear
SMS/MMS
.
67
Messaging, Internet, and Messenger
To view a received message:
1. On the SMS/MMS screen, open the message folder you
want.
The icons on the message list tells you the message
type.
•
•
: SMS message
: MMS message
Note: You can change the default settings for viewing an
SMS message. On a message list, press the Menu
soft key and select Options
→
Display.
2. Select the message you want to view.
If you open a push message from a WAP server, press
the Proceed soft key to access the URL specified in the
message.
To access message options:
While viewing a received or sent message, you can access
the following options by pressing the Menu soft key.
•
•
Delete: deletes the message.
Reply All (SMS): sends a reply to the sender and all
other recipients
•
Reply (MMS) : sends a reply to the sender and/or all
other recipients, or forwards the message to other
people..
•
•
Forward (SMS): forwards the message to other people.
Move: allows you to move the message to other folders.
68
Messaging, Internet, and Messenger
•
Mark as Unread
/Mark as Read: allows you to mark the
message as unread or read. Unread messages are
boldfaced on the message list.
•
•
•
•
Save to Contacts: allows you to save the sender’s
number or address.
Save as MMS Template (MMS): saves the message as
an MMS template for reuse.
Attached files (MMS): allows you to save attachments
of the message into the phone’s memory.
MMS Options: allows you to change the MMS settings.
See below.
Viewing messages on the SIM card
Sometimes, text messages may be stored on the SIM card,
depending on their specifications. To view the messages
stored on the SIM card, you need to copy them to a folder
in your phone.
1. On a message list, press the Menu soft key and select
Options
→
Import SIM Messages.
2. Press the Done soft key.
The text messages are copied from the SIM card to
SMS/MMS Inbox.
69
Messaging, Internet, and Messenger
Configuring MMS settings
You can change the default MMS settings. From composing
or viewing an MMS message, press the Menu soft key and
select MMS Options. The following options are available:
•
Sending Options: Allows you to change the settings for
sending MMS messages.
Priority: You can select the priority level of your
messages.
Validity Period: You can select the length of time your
messages are stored in the message centre after they
are sent.
Delivery Time: You can select the time delay before
messages are sent.
Creation Mode:Allows you to set the phone to allow the
MMS creation using unsupported files.
Size: You can select the message size.
Hide address: You can set your caller ID to be hidden
from outgoing messages.
Request delivery report: When this option is activated,
the network informs you whether or not your message
has been delivered.
Request read report: When this option is activated,
your phone sends a request for a reply along with your
message to the recipient.
•
Receiving Options: Allows you to change the settings
for receiving MMS messages.
Home Network: Set how to retrieve new messages
from the server in your home network.
Roaming Network: Set how to retrieve new messages
from the server while roaming around another network.
70
Messaging, Internet, and Messenger
Reject Unknown Sender:reject messages from
unknown senders.
Report Allowed:send a delivery report from the
network to the sender.
Advertisement Allowed:accept advertisements.
Information Allowed:accept information messages.
•
MMS Profiles: Allows you to set up and activate MMS
profiles which are sets of MMS parameters required to
send or receive MMS messages. To activate a profile,
select it from the profile list.
To edit a profile, press the Menu soft key and select Edit
.
Change the following options:
Profile Name: Enter the profile name.
MMSC URL: Enter the URL address of the MMS centre.
Bearer: select the network bearer type.
Working with E-mail messages
You can send and receive e-mail messages in one of these
ways:
• Synchronise e-mail messages with Microsoft Exchange or
Microsoft Outlook on your PC.
• Send and receive e-mail messages by connecting directly
to an e-mail server through an Internet Service Provider
(ISP) or a network.
71
Messaging, Internet, and Messenger
Synchronising E-mail messages
Use the Outlook EMail account to send and receive
e-mail messages by synchronising e-mail messages with
Microsoft Exchange or Microsoft Outlook on your PC.
E-mail messages can be synchronised as part of the
general synchronisation process. You will need to enable
Inbox synchronisation in ActiveSync.
During synchronisation:
• Messages are copied from the mail folders of Exchange or
Outlook on your PC to the Outlook Email folders on your
phone.
• E-mail messages in Outbox on your phone are
transferred to Exchange or Outlook, and then sent from
those programs.
• E-mail messages in folders must be selected in
ActiveSync on your PC in order to be transferred.
Connecting directly to an E-mail server
You can send and receive e-mail messages by connecting
to an e-mail server. You’ll need to set up a remote
connection to a network or an ISP, and a connection to your
e-mail server.
When you connect to the e-mail server, new messages are
downloaded to the phone’s Inbox folder. Also messages in
the phone’s Outbox folder are sent, and messages that
have been deleted on the e-mail server are removed from
the phone’s message folders.
Folder behavior with a direct connection to an E-mail
server
The behavior of the folders you create depends on whether
you are using POP3 or IMAP4.
72
Messaging, Internet, and Messenger
• If you use POP3 and you move e-mail messages to a
folder you created, the link is broken between the
messages on the phone and their copies on the mail
server. The next time you connect, the mail server will
see that the messages are missing from the phone Inbox
and delete them. This prevents you from having
duplicate copies of a message, but it also means that you
will no longer have access to messages that you move to
folders created from anywhere except the phone.
• If you use IMAP4, the folders you created and the e-mail
messages you moved are mirrored on the server.
Therefore, messages are available to you anytime you
connect to your mail server. This synchronisation of
folders occurs whenever you connect to your mail server;
create new folders or rename/delete folders when
connected.
Creating an e-mail account
You need to create a new account to be used for retrieving
and sending e-mail messages.
To make a new account:
1. From any message folder, press the Menu soft key and
select Options
→
New Account.
2. Enter your display name and e-mail address, and press
the Next soft key.
If you want to set up your account automatically from
the Internet, select Attempt to obtain email settings
from the Internet
.
3. Enter your user information, such as user name,
password, and domain name, press the Next soft key.
73
Messaging, Internet, and Messenger
4. Select the e-mail server type, enter an account name,
and select a network type.
5. Press the Next soft key.
6. Enter the server names and press the Next soft key.
If you want to set up an outgoing server, select
Outgoing Server Settings
.
7. Set the options for downloading e-mail messages and
press the Next soft key.
You can select the number of days for which you receive
e-mail messages and set the maximum data volume of
e-mail messages you want to download.
8. Select how often your phone automatically connects to
the server and checks for incoming e-mails, and press
the Next soft key.
9. Press the Finish soft key.
To edit an account:
1. From any message folder, press the Menu soft key and
select Options
→
Account Options.
2. Select the account you want.
3. Change the account settings as you would when
creating it.
For SMS/MMS, you can set to send a delivery report
request for outgoing messages or to use Unicode
encoding.
74
Messaging, Internet, and Messenger
Creating and sending an E-mail message
1. On the Messaging main screen, select the e-mail
account with which you want to send.
2. Press the New soft key.
3. In the To Cc, or Bcc field, enter the recipients’ e-mail
,
addresses, separating them with a semicolon.
Note: The Cc or Bcc fields are above the To field.
You can retrieve addresses from the contact list by
pressing the Menu soft key and selecting Add
Recipient
.
4. Press the Down key to move to the Subject field and
enter the e-mail subject.
5. Compose your e-mail message.
To enter preset or frequently used sentences, press the
Menu soft key, select My Text, and select a sentence.
You can add a picture or voice note as an attachment by
pressing the Menu soft key and selecting Insert
→
a
item type.
6. Press the Send soft key when you have finished
composing the message.
7. Press the Menu soft key and select Send/Receive to
connect to the network and send the message.
Viewing e-mail messages
You can also view messages you received, sent, composed
but not sent by accessing the message folders.
75
Messaging, Internet, and Messenger
To open the message folders:
On the Messaging main screen, access the e-mail account
you want, press the Menu soft key, and select Folders
.
The following default folders display:
•
Deleted Items: contains messages that have been
deleted on your phone.
•
•
•
Drafts: stores draft messages that have not been sent.
Inbox: contains received messages.
Outbox: is a temporary storage place for messages
waiting to be sent.
•
Sent Items: stores the messages that have been sent.
Note: When you first have synchronised e-mail messages, the
Junk E-mail folder is copied from the Microsoft Outlook
on your PC to Outlook E-mail on your phone. The next
time you synchronise, the e-mail messages that appear
to be Junk e-mail are saved in that folder according to
the options you set in the Microsoft Outlook.
To view all message folder contents in the selected
account, press the Menu soft key and select Show All
Folders
.
To view an e-mail message:
1. On the Messaging main screen, select the e-mail account
from which you want to receive e-mail messages.
2. Press the Menu soft key and select Send/Receive
.
The phone connects to your e-mail server and receives
incoming e-mail messages or sends e-mail messages in
Outbox.
3. Select the message you want to view.
76
Messaging, Internet, and Messenger
To access message options:
While viewing a received or sent e-mail, you can access the
following options by pressing the Menu soft key.
•
•
Delete: deletes the message.
Reply All: sends a reply to the senders and all other
recipients.
•
•
Move: allows you to move message(s) to other folders.
Mark as Unread/Mark as Read: allows you to mark the
message as unread or read. Unread messages are
boldfaced on the message list.
•
•
Download Message: allows you to download the
complete contents of the e-mail from the e-mail server.
Send/Receive: sends or receives the e-mail messages.
Setting downloading options
You can specify your downloading preferences when you
set up the account or select your synchronisation options.
You can change them at any time:
• Change options for Inbox synchronisation using
ActiveSync options. For more information, see
“ActiveSync Help.”
• Change options for direct e-mail server connections in
Inbox on your phone. Press the Menu soft key and
select Options
→
Account Options. Select the account
you want and change it.
Viewing e-mail attachments
To download an attachment, select the attachment
displayed as a list of hyperlinks in an open message. It will
be downloaded the next time you synchonise or connect to
your e-mail server and send or receive e-mail messages. To
view an attachment, select the attachment in an open
77
message.
Messaging, Internet, and Messenger
Switching beween message accounts
While working in an account, you can switch to another
message account any time you need.
1. Press the Menu soft key and select Switch Accounts
.
2. Select the account to which you want to switch.
Inserting signatures into messages
You can specify a signature to be automatically inserted
into SMS, MMS or e-mail messages that you send.
To specify a signature:
1. On the Messaging main screen, select the message
account you want.
2. Press the Menu soft key and select Options
Signatures
→
.
3. Select the account for which you want to specify from
the Select an account field.
4. Select Use signature with this account
.
5. To insert a signature in every messages, including when
you reply or forward the message, select Include when
replying and forwarding
.
6. Enter a signature to be inserted and press the Done soft
key.
78
Messaging, Internet, and Messenger
Internet Explorer
Use Microsoft® Pocket Internet Explorer to view Web HTML,
cHTML, and WAP pages. You can browse by connecting to
an Internet service provider (ISP) or network and browse
the Web. To do this, you’ll need to create the connection
first as described on page 148.
When connected to an ISP or network, you can also
download files and programs from the Internet.
To open Internet Explorer:
On the Home screen, press the Start soft key and select
Internet
→
Internet Explorer
.
Browsing the Internet
1. To connect and start browsing, do one of the following:
• Press the Menu soft key and select Address Bar
.
Enter the web address you want to visit
• Press the Menu soft key and select History to open
the list of the pages you last accessed. Select a page
from the list.
• Scroll to the page you want to view from the
Favourites list.
2. Press the Go soft key on the browser to open the
associated web page.
79
Messaging, Internet, and Messenger
Navigating the Internet Explorer
The following table helps you browse the Internet easily:
To
Press
scroll through browser
items
the Navigation keys.
select a browser item
.
return to the previous page
refresh the connection
.
the Menu soft key and
select Refresh
.
To change the display
options
the Menu soft key, select
View, and select the
option you want.
To change the text and
image size
the Menu soft key, select
Zoom, and select the
option you want.
view information on the
web page
the Menu soft key and
select Tools
Properties
→
.
Using the Favorites list
You can store your favourite link while using the Internet
Browser and then access them easily. Categorising them
enables you to find them more quickly.
Adding a web page to the Favorites list
1. Go to the page you want to add and press the Menu
soft key and select Add to Favourites
.
80
Messaging, Internet, and Messenger
2. Enter a name for the favourite link and the URL of the
link.
3. Select a category from the Folder field under which you
want to save the favourite link.
You can also create a new category. See page 84.
4. Press the Add soft key.
Opening a link through the Favourites list
1. On the Internet Explorer screen, press the Favourites
soft key.
2. Scroll to the link you want to access.
If the link you want is in the certain folder, open the
folder and scroll to the link.
3. Press the Go soft key.
Managing Favorites categories
You can create a new category for saving favourite web
pages and edit or delete the created categories.
1. On the Internet Explorer screen, press the Favourites
soft key.
2. Press the Menu soft key and select Add Folder to
create a new category.
Alternatively, scroll to the category and press the Menu
soft key and select Edit or Delete to edit or delete the
selected category.
81
Messaging, Internet, and Messenger
Changing Explorer options
You can customise Web browsing options, change the
connection settings, and clear memory. On the Internet
Explorer screen, press the Menu soft key and select Tools
→
Options
.
The following options are available:
•
General: You can select whether or not to play sounds
on web pages, view the warnings when you move
from a secure web page to a non-secure one, or
enable or disable the receiving and sending of cookies.
You can also select the text encoding type to use.
•
•
Connections: You can change the network setting to
connect to Internet Explorer. If you select Automatically
detect settings, your phone automatically detects
network settings from your service provider.
Memory: You can check the amount of memory
currently being used for the Internet Explorer. To clear
the memory, scroll to a type of memory and press the
Clear soft key.
WAP Browser
Using Browser, you can browse the WAP service preset by
your service provider and other WAP (Wireless Application
Protocol) sites on your phone.
Connecting to a WAP site
1. On the Home screen, press the Start soft key.
2. Select Internet
→
WAP Browser
.
82
Messaging, Internet, and Messenger
3. To connect and start browsing, do one of the following:
• Press the Menu soft key and select Home to access
the homepage of your service provider.
• Press the Favourites soft key, select the category
which contains the WAP site you want, and then select
the WAP site.
• Press the Menu soft key and select Go To. Enter the
address of WAP site you want to visit and press the Go
soft key.
4. While navigating through WAP pages, you can use the
following options:
To
Press
go to the previous visited
page
.
go to the homepage
the Menu soft key and
select Home
the Menu soft key and
select Refresh
the Menu soft key and
select History
.
refresh the current page
.
Open the list of the WAP
sites you have accessed
.
Using the Favourites list
You can store your favourite WAP sites and then access
them easily. Categorising them enables you to find them
more quickly.
Adding a URL to the Favourites list
1. On the WAP Browser screen, press the Menu soft key
and select Add to Favourites
.
83
Messaging, Internet, and Messenger
2. If there is no category created, enter a name for the
category and press the Save soft key.
3. Enter a name for the favourite site and the URL of the
site.
4. Select the category under which you want to save the
favourite site.
You can also create a new category by pressing the
Menu soft key and select New Category
.
5. Press the Done soft key.
Opening a page through the Favourites list
1. On the WAP Browser screen, press the Favourites soft
key.
2. Scroll to a category from the list and press the Open
soft key.
3. Scroll to the WAP site you want and press the Go soft
key.
Managing Favourite categories
You can create a new category for saving favourite WAP
sites and edit or delete the created category.
1. On the WAP Browser screen, press the Favourites soft
key.
2. Press the Menu soft key and select New to create a
new category.
Or scroll to the category you want, press the Menu soft
key, and then select Rename or Delete to edit the
selected category.
84
Messaging, Internet, and Messenger
Deleting a favourite item
1. On the WAP Browser screen, press the Favourites soft
key.
2. Scroll to a category from the list and press the Open
soft key.
3. Scroll to the WAP site you want to delete and press the
Menu soft key and select Delete
.
4. Press the Yes soft key to confirm the deletion.
Setting the WAP options
You can access options for the WAP browser. Press the
Menu soft key and select Options
.
•
Settings: You can view the current connection settings
for WAP and set the selected profile as an active profile or
edit a selected profile. You can also set the WAP browser
to load the homepage when launching.
•
Cache/Cookie: Viewed pages can be cached for faster
downloads and cookies are pieces of information related
to a session. You can select to enable or disable the
cache or cookies.
You can clear information stored in the cache and cookie
by pressing the Menu soft key and selecting Clear
Cache or Clear Cookie
.
•
Set as Home Page: You can change the startup
homepage of the WAP browser. Access the page you want
and select this option.
85
Messaging, Internet, and Messenger
Pocket MSN
Pocket MSN delivers an always-on experience that enables
you to remain available to other online users and always up
to date with e-mail, instant messaging (IM) and other
online services without maintaining a continuous network
connection to the phone.
The connection will be restored when a new message
arrives or when you needs the service. In addition,
subscribers will receive only updates or changes to their
contacts and Inbox rather than receiving entire lists
when they connect to the service.
You will have one-click access to MSN Hotmail® and MSN
Messenger. In addition, Pocket MSN will allow you to
wirelessly browse online and receive other MSN services,
including MSN Alerts, which include news, sports and
weather updates.
In addition to always-on services, you can access, compose
and answer Hotmail messages offline, maximising their
time when mobile connections aren't available.
To access Pocket MSN:
On the Home screen, press the Start soft key and select
Internet
→
Pocket MSN.
Signing In
To use the MSN Messenger or Hotmail service, you must
have a Microsoft Passport™ account or Hotmail account, or
a Microsoft Exchange e-mail account. If you have a
Hotmail® or MSN account, you already have a Passport.
Once you have obtained either a Microsoft Passport or a
Microsoft Exchange account, you are ready to set up your
account.
86
Messaging, Internet, and Messenger
To sign into the MSN service:
1. On the Pocket MSN main screen, select MSN
Messenger MSN Hotmail, or Compose Hotmail.
,
2. If you selected MSN Messenger, press the Sign In soft
key.
3. Enter the e-mail address and the password of your
Microsoft Passport and Hotmail account.
4. Press the Sign In soft key.
Using MSN Messenger
MSN® Messenger on your phone is an instant messaging
program that lets you:
• see who is online.
• send and receive instant messages.
• have instant message conversations with groups of
contacts.
Working with contacts
The MSN Messenger screen shows all of your messenger
contacts at a glance, divided into Online and Not Online
categories. From this view, while connected, you can start
a chat.
• To see others who are online but not seen on the MSN
Messenger screen, press the Menu soft key and select
Chats
.
87
Messaging, Internet, and Messenger
• To add a contact, press the Menu soft key and select
Add Contact
• To delete a contact, press the Menu soft key and select
Delete Contact
.
.
• To set the MSN Messenger to automatically update the
contacts’ status when it changes, press the Menu soft key
and select Auto update status
• To view the properties of a contact, press the Menu soft
key and select Properties
• To block a contact from chatting with you, press the
Menu soft key and select Block
.
.
.
88
Messaging, Internet, and Messenger
Chatting with contacts
1. To open a chat window, scroll to the contact with whom
you want to chat.
2. Press the Menu soft key and select Send Message
.
3. Enter your message in the text entry area at the bottom
of the screen, or press the Menu soft key and select My
Text to enter a preset message.
To invite another contact to a multi user chat, press the
Menu soft key, select Invite, and select the contact you
want to invite.
To switch back to the main window, press the Menu soft
key and select My contacts. To revert back to your chat
window, press the Menu soft key, select Chats, and
select the person whom you were chatting with.
4. To end the chat, press the Menu soft key and select
End Chat
.
Using the Hotmail service
You can send and read e-mail messages on the phone via
the Microsoft Hotmail service.
Composing and sending an e-mail
1. On the Pocket MSN screen, select Compose Hotmail
.
2. Compose an e-mail as you would in the Messaging
program.
89
Messaging, Internet, and Messenger
Viewing e-mail messages
1. On the Pocket MSN screen, select MSN Hotmail
2. Press the Menu soft key and select Folders
.
.
3. Select a message folder, and then select the message
you want to view.
Accessing the MSN Mobile Homepage
On the Pocket MSN screen, select MSN Mobile Home. You
can access various mail, information, entertainment
services provided by Microsoft.
Changing Pocket MSN setting options
From the Pocket MSN mail screen, press the Options soft
keys. The following options are available:
Note: To change the settings, you may need to sign in to the
MSN service.
•
•
General: You can clear the saved password, if any, or set
Pocket MSN to be displayed on the Home screen.
Hotmail: You can set filters to receive or block e-mails or
set Hotmail to automatically download new messages to
the phone.
•
Messenger: You can change your display name in
Messenger or set Messenger to automatically update
your contacts’ presence information.
•
•
SMS: You can set Pocket MSN to temporarily use SMS
when a data connection is unavailable.
Switch User: You can reset user information to sign in
to the MSN service by another user account.
90
6
Organiser
This chapter explains how to keep track of contacts and
appointments and make a list of tasks you need to do.
Contacts
Contacts maintains a list of your friends and colleagues so
that you can easily find the information you’re looking for,
whether you’re at home or on the road.
To open Contacts:
On the Home screen, press the Contacts soft key. You can
also press the Start soft key and select Contacts. You can
view the list of contact cards that you have created.
Creating a contact card
You can save a new contact card in Contacts or on the SIM
card.
Creating a contact card in the phone’s memory
1. On the contact list, press the New soft key
.
2. Enter a name and other contact information.
To assign the contact card to a category, scroll to the
Categories field and select a category.
You can add a personal ringtone to a contact card. Scroll
to the Custom ring tone field and select the ring
melody you want.
Select the Picture field to add an image for the caller ID
image.
91
Organiser
3. When you have finished, press the Done soft key.
Creating a contact card on the SIM card
1. On the contact list, press the Menu soft key and select
New SIM Contact
.
2. Enter the name of the person you want to add.
3. Scroll to the Number field and enter the number you
want to store.
4. Press the Done soft key.
Creating a contact card from the Dialling screen
1. On the Home screen, enter the phone number and press
the Save soft key.
2. To create a new contact card, select <New Item>
.
To add the phone number to an existing contact card,
select the contact card.
3. Scroll to the location in which you want to save the
number and press the Insert soft key.
4. Fill in the other fields and press the Done soft key.
92
Organiser
Viewing and editing a contact card
When you access Contacts, the contact list displays the
names of your contacts alphabetically, along with an
abbreviation for the primary contact number or
E-mail address, such as the person’s work phone number
(w) or mobile phone number (m).
Indicates the type of
the default number or
e-mail address.
Indicates the contacts
stored on the SIM card.
The following table shows possible abbreviations that might
be displayed on the Contacts list and their meanings:
Abbreviation
Meaning
work phone/work phone 2
home phone/home phone 2
mobile phone
w/w2
h/h2
m
co
company phone
pgr
pager
car
car phone
ast
assistant phone
rdo
radio phone number
e-mail/e-mail 2/e-mail 3
e/e2/e3
93
Organiser
Abbreviation
im/im2/im3
web
Meaning
IM/IM2/IM3
web page
Note: All of the contacts saved on the SIM card follow all of
the contacts saved in the phone’s memory.
To open a contact card:
1. On the contact list, select the contact’s name you want
to view.
If the contact card is assigned to a certain category,
press the Menu soft key and select Filter and then
select the category from the pop-up list.
2. Select the contact card you want.
A summary screen is displayed.
3. On the summary screen:
• To edit the contact information, press the Menu soft
key and select Edit
.
• To send an SMS message to the contact card, scroll to
the available number and press the SMS soft key, or
press the Menu soft key and then select Send SMS
.
• To dial a number, select the number or press the Call
soft key.
• To send an e-mail, select the e-mail address.
• To access a web page, select the web page.
94
Organiser
Adding a number or address to Speed Dial
You can assign a short cut number to a phone number for
speed dialling or to an e-mail or URL address for quick
access.
1. On the contact list, select the contact you want.
2. Scroll to the number or address.
3. Press the Menu soft key and select Add to Speed Dial
.
4. If necessary, change the name and select a keypad
location.
5. Press the Done soft key.
Copying entries between the SIM Card and
Contacts
You can copy the contact card or all of contact entries in a
specific category to the SIM card or vice versa.
Copying from Contacts to the SIM card
1. On the contact list, select the contact card stored in the
phone’s memory.
2. Scroll to the phone number to be copied.
3. Press the Menu soft key and select Save to SIM
4. If necessary, change the contact name.
5. Press the Done soft key.
.
95
Organiser
Copying from the SIM card to Contacts
1. On the contact list, select the contact card stored on the
SIM card.
2. Press the Menu soft key and select Save to Contacts
.
3. Select <New Item> to create a new contact card and
add contact information.
Otherwise, select a contact card to which you want to
add the number, scroll to the number type, and press
the Insert soft key.
4. Press the Done soft key to save the change.
Beaming a contact card
You can send a contact card in Contacts to another phone
via an active infrared or Bluetooth connection.
For an Bluetooth connection, make sure that the Bluetooth
feature is active.
1. On the contact list or on the summary screen, press the
Menu soft key and select Beam Contact
.
2. For an IrDA connection, align the infrared ports on the
devices so that they are unobstructed and within a close
range.
Wait for the phone to search for available devices.
3. Scroll to a device and press the Beam soft key.
96
Organiser
Deleting a contact card
1. On the contact list or on the summary screen, press the
Menu soft key and select Delete Contact or Delete
.
2. Press the Yes soft key to permanently delete the
contact card.
Note: If you delete a contact card on your phone and
synchronise Contacts with your computer, the contact
card in Outlook on your computer will be deleted.
Calendar
Use Calendar to schedule appointments, including
meetings and other events. You can check your
appointments in one of several views (Agenda, Week, and
Month).
To open Calendar:
On the Home screen, press the Start soft key and select
Organizer
→
Calendar. You can view the lists of
appointments that you have created in the agenda view.
97
Organiser
Creating an appointment
1. Press the Menu soft key and select New Appointment
.
2. Fill in the fields.
•
•
Subject: Enter a description of the appointment
.
Start date
,
Start time
,
End date, and End time: If
needed, change the date and time.
•
All day event: If checked, the appointment lasts all
day.
•
•
Location: Enter the place of the appointment
Reminder: Select a time setting for the alarm to
remind you of the appointment
.
.
•
•
•
•
Occurs: Select a repeat interval to set how often the
appointment repeats.
Status: Select an appropriate status for the
appointment.
Sensitivity: Select a sensitivity class by which
Microsoft Exchange Server handles the appointment.
Notes: Add a note for the appointment
.
3. When you have finished, press the Done soft key.
98
Organiser
Viewing and editing an appointment
On the Calendar screen, you can view and edit your
appointments using the different views: Agenda, Week, or
Month. By default, the Calendar first appears in the agenda
view, which provides the most detail information about
your appointment.
Switching the view mode
You can change the view mode of the calendar to cycle
through the agenda, week, and month view.
In each view, press the Week Month, or Agenda soft
,
key.
•
•
Week View: shows the calendar of your appointments.
Month View: allows you to keep track of your monthly
schedule and shows which days have appointments
scheduled.
•
Agenda View: shows you the appointments for the
selected day. The entries are grouped according to their
starting times.
Editing an appointment
1. Select the calendar view by pressing the Week Month,
,
or Agenda soft key.
99
Organiser
2. In each view, select the date of the appointment by
pressing the Navigation keys.
To go to today, press the Menu soft key and select Go
to Today
.
To go to a certain date, press the Menu soft key and
select Go to Date. Enter the date and press the Done
soft key.
3. Select the appointment you want to view.
4. Press the Edit soft key.
5. If you are editing a repeating or continuous
appointment, decide whether to edit all appointments in
the series or just the current appointment by pressing
the No or Yes soft key.
6. Edit the appointment information and press the Done
soft key to save the changes to the appointment.
Beaming an appointment
You can send an appointment to another phone via an
active infrared or Bluetooth connection.
For an Bluetooth connection, make sure that the Bluetooth
feature is active.
1. On the calendar screen, open the appointment you
want.
2. Press the Menu soft key and select Beam
Appointment
.
100
Organiser
3. For an IrDA connection, align the infrared ports on the
devices so that they are unobstructed and within a close
range.
Wait for the phone to search for available devices.
Deleting an appointment
1. On the calendar screen, scroll to an appointment to
delete.
2. Press the Menu soft key and select Delete
Appointment
.
3. If you make deleting to a repeating or continuous
appointment, decide whether to delete all appointments
in the series or just the current appointment by pressing
the No or Yes soft key.
Or, press the Yes soft key to permanently delete the
appointment.
Changing calendar setting options
From any view, press the Menu soft key and select
Options. The following options are available:
•
First day of week: You can select which day the
calendar starts with.
•
•
Week view: You can select a week view type.
Month view: You can set the Month view shows the
current week number.
•
Set reminders: You can select default schedule alarm
time.
101
Organiser
D-Day
In D-Day, you can calculate how many days are left before
or have passed since a specific event.
To open D-Day:
On the Home screen, press the Start soft key and select
Organizer
→
D-Day.
Creating a D-Day counter
1. Press the New soft key.
2. Set options in each field.
•
Date: Enter the date of the day you want to count to
or from.
•
•
Title: Enter the counter title.
Category: Select one of the preset categories. You
can filter counters by category from the counter list.
•
Repeat every year: Select to set the D-day counter
to repeat every year.
3. When you have finished, press the Done soft key.
The counter is added to the list and shows how many
days are left or have passed.
102
Organiser
Editing D-Day categories
You can change the name of D-Day categories.
1. From the counter list, press the Menu soft key and
select Edit Category
.
2. Scroll to the category you want.
3. Press the Menu soft key and select Rename
.
4. Enter a new name and press the Done soft key.
Deleting a D-Day counter
1. Scroll to the counter you want.
2. Press the Menu soft key and select Delete
.
Tasks
Tasks is a convenient place to create task reminders. You
can mark a task as completed or delete a task.
To open Tasks:
On the Home screen, press the Start soft key and select
Organizer
→
Tasks.
Creating a task note
1. Enter your task information in the Enter new task
here field.
2. When you have finished, press
twice.
The task note is added to the task list.
103
Organiser
Completing a task
When a task is complete, mark it to indicate that the task is
done. To mark, scroll to the completed task and press the
Complete soft key.
To unmark, press the Activate soft key.
Beaming a task note
You can send a task note to another phone via an active
infrared or Bluetooth connection.
For an Bluetooth connection, make sure that the Bluetooth
feature is active.
1. On the task list, scroll to the task you want.
2. Press the Menu soft key and select Beam Task
.
3. For an IrDA connection, align the infrared ports on the
devices so that they are unobstructed and within a close
range.
Wait for the phone to search for available devices.
4. Scroll to a device and press the Beam soft key.
Deleting a task
1. On the task list, scroll to the task.
2. Press the Menu soft key and select Delete Task
.
3. Press the Yes soft key to confirm the deletion.
104
Organiser
Voice Notes
In any program where you can write on the screen, you can
also quickly capture thoughts, reminders, and phone
numbers by recording a message. In Voice Notes, you can
create a recording.
To open Voice Notes:
On the Home screen, press the Start soft key and select
Organizer
→
Voice Notes.
Recording a voice note
1. Hold your phone’s microphone near your mouth or other
source of sound.
2. Press the Record soft key to make your recording.
The numbers on the centre of the screen indicate the
elapsed time.
3. Press the Stop soft key to stop recording.
Your phone automatically saves the voice note labelled
with the title and lists the notes on the All Notes screen.
Reviewing a voice note
1. On the All Notes list, select the note you want to review.
Recording is playing. During playback, you can adjust
the sound volume by pressing
.
2. Press the Stop soft key to stop playing.
105
Organiser
Setting a voice note as the ringtone
1. On the All Notes list, scroll to a voice note.
2. Press the Menu soft key and select Set As Ringtone
.
3. Press the OK soft key.
Alarm
You can use the alarm clock to set a wake-up alarm or set
an alarm to remind you of an appointment.
To open alarm:
On the Home screen, press the Start soft key and select
Organizer
→
Alarm.
Setting a wake-up alarm
1. On the Alarm screen, select Wake up alarm
.
2. Select a check box, enter the time for the wake-up
alarm to sound, and select the days when the wake-up
alarm rings in the week viewer.
Use the Navigation keys to move through each field. You
can make up to 3 wake-up alarms.
3. Select a melody for the alarm in the Tone field.
4. Select a time interval to resume the alarm after the
alarm is stopped in the Snooze field.
5. Press the Done soft key.
106
Organiser
Setting an alarm
1. On the Alarm screen, select one of Alarm 1 to Alarm 4
.
2. Set each alarm option.
3. Press the Done soft key.
Stopping an alarm
• When an alarm rings, press the Dismiss soft key to stop
it, or press the Snooze soft key to set the alarm to ring
again after the specified snooze interval.
• To deactivate an alarm, access it from the Alarm screen
and remove the check marks for a wake-up alarm, or set
Off from the Alarm activation field for a normal alarm.
WorldClock
You can set up the world clock with the time zones you
want, and then check the current time of the city you need
at any time.
1. On the Home screen, press the Start soft key
2. Select Organizer
→
WorldClock.
3. Select the clock you want.
4. Press the Left or Right key to move the time zone line.
To apply daylight savings to the currently selected time
zone, select Summer Time
.
5. Press the Done soft key to save the selected time zone.
6. Repeat from step 3 to add time zones.
107
7
Multimedia
Camera
With the built-in camera on your phone, you can take
photos or record videos of people or events while on the
move. Your phone produces JPEG photos and 3GP videos.
To open Camera:
.
Taking photos
1. When you access the Camera mode, the image to be
captured appears.
2. Adjust the image to be captured.
• Press the Up or Down key to zoom in or out.
• Press the Left or Right key to adjust the brightness of
the image.
• Press the Menu soft key to access the camera options.
See page 109.
• Use the number keypad to adjust the image quickly.
See page 109.
3. Press
or
to take a photo.
4. Press the Save soft key to save the photo.
The photo is saved to the location specified in the
Default Storage option. After saving the photo, the
camera automatically returns to Preview mode.
108
Multimedia
Setting camera options
You can customise the camera settings. Once you set the
camera settings, the corresponding icons display at the top
of the Preview screen.
On the Preview screen, press the Menu soft key.
•
•
Shooting Mode: changes the camera shooting mode.
Single Shot: takes a normal single shot.
Multi Shot: takes a series of stills. You can select the
number of photos the camera will take.
Mosaic Shot: takes a series of stills and saves them in
one frame. You can select a layout.
•
•
Flash On: turns the flash on or off.
Timer: selects the length of time for the camera to delay
before taking a photo.
•
•
•
Effects: selects a colour tone for photos.
Frames: selects a decorative frame.
Options: changes the default settings for Camera. See
page 112.
Using the keypad shortcuts
You can use the keypad to customise your camera settings
when you are in the preview screen.
•
•
: switches to Camcorder mode.
: changes the shooting mode by changing the number
of photos or the layout.
•
•
•
: changes the image size.
: changes the image quality.
:
changes the white balance.
109
Multimedia
•
•
: turns the flash on or off.
: selects the length of delay time before taking a
photo.
•
•
•
: changes the colour tone.
: allows you to add a decorative frame to the photo.
: allows you to select camera options.
Viewing photos
To view photos you have taken, press the Album soft key
in Camera mode. The list of the photos is stored in the
currently selected storage memory. For further details, see
page 122.
Recording video clips
1. From Camera mode, press
to switch to Camcorder
mode. The image to be recorded appears.
2. Adjust the image to be recorded.
• Press the Up or Down key to zoom in or out on your
subject.
• Press the Left or Right key to adjust the brightness of
the image.
• Press the Menu soft key to access the camcorder
options. See page 111
• Use the number keypad to adjust the image quickly.
See page 111.
3. To start recording, press
or
. The timer on the top
left of the screen shows you the elapsed time.
110
Multimedia
4. To stop recording, press the Stop soft key,
, or
.
5. Press the Save soft key to save the video.
The video clip is saved to the location specified in the
Default Storage option. After saving the video, the
camcorder automatically returns to Video Preview.
Setting camcorder options
You can customise the camcorder settings. Once you set
the video settings, the corresponding icons display at the
top of the Video Preview screen.
•
•
Camera: switches to Camera mode.
Recording Mode: select a video recording mode. Select
Limit for MMS to record a video suitable for an MMS or
e-mail message. Select Normal to record a video within
the limit of the currently available memory.
•
•
Flash On: turns the flash on or off.
Timer: selects the length of time for the phone to delay
before recording a video.
•
•
Effects: selects a colour tone for the video.
Audio Off: selects whether or not you record audio with
a video clip.
•
Options: changes the default settings for Camera. See
page 112.
Using the keypad shortcuts
You can use the keypad to customise your video settings
when you are on the Video Preview screen.
•
•
: switches to Camera mode.
: changes the recording mode.
111
Multimedia
•
•
•
•
•
: changes the image size.
: changes the image quality.
:
changes the white balance
.
: turns the flash on or off.
:
selects the length of delay time before starting
recording a video.
•
•
•
:
:
changes the colour tone
mutes or unmutes audio
: allows you to select camera options.
.
.
Playing video clips
To view the video clips you have recorded, press the
Album soft key in Camcorder mode. The list of the video
clips is stored in the currently selected storage memory.
For further details, see page 122.
Changing the default camera settings
To customise the default camera settings, press the Menu
soft key and select Options
.
The following options are available:
•
•
General: You can customise the general settings for the
Camera program.
Auto Save: allows you to set whether the camera will
save the photo or video after taking or recording.
Default Storage: allows you to select where you want
to store your photos or video clips.
Camera: You can customise the settings for Camera
mode.
112
Multimedia
Photo Size: allows you to select an image size.
Photo Quality: allows you to select an image quality.
White Balance: allows you to select the white balance
mode to adjust the colour balance of photos.
Shutter Sound: allows you to select a sound for the
shutter release.
Default Name: allows you to change the default prefix
of photo names.
•
Camcorder: You can customise the settings for
Camcorder mode
Video Size: allows you to select an video frame size.
Video Quality: allows you to select an image quality.
White Balance: allows you to select the white balance
mode to adjust the colour balance of videos.
Default Name: allows you to change the default prefix
of video names.
•
•
Shortcuts: You can check view the functions assigned to
the keys in Camera mode or Camcorder mode.
About: You can check the copyright information of the
Camera program.
113
Multimedia
Windows Media Player
Your phone is equipped with Microsoft Windows Media
Player 10. With Windows Media Player, you can play
Windows Media Audio, Windows Media Video, and MP3
audio files that are stored on your phone, a memory card,
or on the Web.
To open Windows Media Player:
On the Home screen, press the Start soft key and then the
More soft key, and select Windows Media
.
Preparing media files
The Windows Media Player of your phone can play various
file formats, such as .asf, .wma, .wmv, and .mp3. You can
copy media files from your desktop computer to the phone
using the Windows Media Player or ActiveSync. You can
also copy media files using a memory card.
Note: If you have stored too many files in memory, the
operation speed of the system slows down. Using an
optional memory card helps you clear up this problem
and lets you enjoy more music files.
About DRM, licenses, and protected files
Some digital media files, such as songs downloaded from
online stores, are encrypted to prevent the files from being
unlawfully distributed or shared. Content providers use a
technology called Digital Rights Management (DRM), to
encrypt the files. During the encryption process, the
content provider creates a license which specifies how and
when the file can be used.
114
Multimedia
For example, a content provider could create a license that
allows you to play a certain file on your computer, but not
on your phone. Or, a license that allows you to play a
certain file on your phone, but only for a month, or perhaps
only a certain number of times. Files that have licenses
associated with them are called protected files.
Copying media files using ActiveSync
1. Connect your phone to a computer and start
synchronisation by referring to page 42.
2. Open the file directory on the phone by clicking Explore
from the Microsoft ActiveSync window.
3. Drag the media files you want to copy and drop them
into a folder.
Windows Media Player automatically retrieves the media
files from the folder where the files are copied and you
can search them from the Library screen. If the media
files do not appear in Library, update the library by
pressing the Menu soft key and selecting Update
Library
.
Copying media files using the desktop player
You can use the desktop player to copy media files. Using
the desktop player ensures that licenses are copied with
protected files.
Make sure that you have Windows Media Player 10 or later
versions on your desktop computer. Depending on the
version of your desktop player, the procedure to copy files
may vary.
1. Connect your phone to the desktop computer and start
synchronisation using a PC data cable.
115
Multimedia
2. Open Windows Media Player on the desktop computer.
3. Click the Sync tab.
4. Click Edit Playlist
.
5. Select the media files you want to synchronise from the
left pane of the window.
6. Click OK
7. Select the saving location from the right pane.
8. Click to select the quality level you want and click
.
OK
.
9. Click Start Sync
.
The selected files are converted and copied to the
location you selected in step 7.
116
Multimedia
Using libraries
A library is a file list provided by Windows Media Player to
retrieve media files in the phone’s memory.
The Library screen contains categories, such as My Music,
My Videos, My TV, and My Playlists. Using the Library
screen, you can sort your content by criteria, such as artist
name, album title, or genre.
On the Library screen, you can use the following options by
pressing the Menu soft key:
•
Queue Up: adds the selected file to the end of the
current play list.
•
Delete from Library: deletes the selected file from the
library.
•
•
Now Playing: Open the current play list.
Library: allows you to select the library you want to
view; for example, the library of files stored on your
phone or on the memory card.
•
•
Update Library: adds new files to the library by
searching your phone or a memory card.
Open File: allows you to find and play files that are
stored on your phone or a memory card, but those are
not in the library.
•
Open URL: allows you to specify a URL address for a
streaming service.
•
•
Properties: displays information about the selected file.
Done: closes the Library screen and displays the player
screen.
117
Multimedia
Playing music and video files
If you have copied media files to your phone’s memory or
memory card, you can play them from Media Player.
Playing media files from a library
1. On the Library screen, if necessary, press the Menu soft
key, select Library, and select the memory from which
you want to retrieve files.
2. When libraries have been updated, press the Done soft
key.
3. Select a category.
4. Scroll to the library you want to play and press the Play
soft key.
If the file does not appear in a library, on the Library
screen, press the Menu soft key and select Open File
.
Then select the file you want to play.
The player screen appears and the selected file plays.
Use the following options during playback:
• To adjust the volume, press the Up or Down key. You can
view the volume level on the screen.
• To adjust the earpiece volume, press
.
• To move backward in a file, press and hold the Left key.
• To move forward in a file, press and hold the Right key.
• To access the next file, press the Right key.
• To access the previous file, press the Left key.
• To pause or resume playback, press
• To play the files in the play list randomly or repeatedly,
press the Menu soft key and select Shuffle/Repeat
• To stop playback, press the Menu soft key and select
Stop
.
.
118
.
Multimedia
Notes
:
• When a Bluetooth headset is connected to the phone, the
play/pause/stop button on the headset may not function
properly. To control the player from the headset, first play or
pause music from Media Player, and then use the button.
Bluetooth headset may not function.
Playing media files on a network
1. On the Library screen, press the Menu soft key and
select Open URL
.
2. Enter a URL in the URL field, or scroll to one of URLs that
you have used from the History field.
3. Press the OK soft key.
Note: To play streaming media, you must be connected to a
network. For more information on creating a remote
connection between your phone and a network, see
page 148.
Setting up a play list
You can add media files on the Library screen to a
temporary play list. It lists the currently playing file, as well
as any files that have been queued up to play next.
Creating a play list
1. On the Library screen, select the category you want and
scroll to the file you want to play.
If the file does not appear on the list, press the Menu
soft key and select Update Library. You can also select
Open File to display the File System screen and search
119
the files you want.
Multimedia
2. Press the Menu soft key and select Queue Up to add
the file to the play list.
3. Repeat from step 1 to add more files.
4. Press
5. Press
to return to the player screen.
to start playing the files.
Opening the play list
On the player screen, press the Now Playing soft key. You
can use various options by pressing the Menu soft key.
Editing the play list
• To change the play order, press the Menu soft key and
select Move Up or Move Down
• To delete the selected files, press the Menu soft key and
select Delete from Playlist
• To clear the play list, press the Menu soft key and select
Clear Now Playing
.
.
.
Changing the Window Media Player
settings
You can customise the appearance and functionality of
Windows Media Player. On the player screen, press the
Menu soft key and select Options
.
You can use the following options:
•
Playback: Select the options for playback. You can
select the way time is displayed on the player screen, or
whether or not to pause playback when you launch
another program, and resume playback after a phone
call.
120
Multimedia
•
Video: Select the viewing options for playing videos,
such as shrinking oversized videos and playing videos on
a full screen.
Note: If there is a problem while playing MP4 files, deselect
the Scale to fit window option. The problem occurs
because the file has been resized.
•
•
Network: Change the connections speed and protocol
for playing streaming content.
Library: Select whether the player screen or the Library
screen is displayed when you open Windows Media
Player.
•
•
Skins: Change the appearance of the player screen by
selecting a new skin.
Buttons: Assign Windows Media Player functions to the
keys on your phone to quickly control playback without
having to use the menus.
Customising SRS WOW XT Settings
SRS WOW XT for Mobile is a suite of 3D audio, bass
enhancement, and mono and stereo speaker technologies
designed to improve the quality of mobile audio, e g
cellular phone sound quality.
To enjoy music with high audio quality, enable the WOW XT
feature before playing media files.
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories and then the More soft key, and
press the WOW XT Settings
.
3. On the SRS WOW XT screen, select On in the WOW XT
On/Off field.
121
Multimedia
4. Select the type you want in the SRS EQ field, or adjust
the settings for each component.
5. Press the Done soft key.
Note
:
•
is a trademark of SRS Labs, Inc. WOW technology is
incorporated under license from SRS Labs, Inc.
• When you use a headset, the WOW XT feature is enhanced
and provides a more powerful listening experience.
Picture & Videos
This program allows you to access all of your picture and
video files stored in your phone's directory or on a memory
card.
To open Pictures & Videos:
On the Home screen, press the Start soft key and then the
More soft key, and select Pictures & Videos. The
thumbnails of the files display.
Viewing a photo
1. From the Pictures & Videos screen, select a photo folder,
if necessary.
Note: Photos captured by the camera on the phone are stored
in the PIC-00 folder.
2. Scroll to the thumbnail image of the picture you want
and press the View soft key.
While viewing a photo, you can use the following options:
122
Multimedia
• To zoom in or out, press
or
.
• To send the picture as part of an MMS or e-mail message,
press the Send soft key.
• To edit the picture, press the Menu soft key and select
Edit. You can then access the editing tool options by
pressing the Menu soft key.
• To set the picture as wallpaper for the Home screen,
press the Menu soft key and select Use as Home
Screen
.
Viewing photos as a slide show
You can view all of your pictures as a slide show, a
sequential presentation of each image in the current
album.
Press the Menu soft key and select Play Slide Show. The
slide show begins on the full screen.
• To change the screen to the Landscape view or Portrait
view, press the Up or Down key.
• To manually scroll through the pictures, press the Left or
Right key.
• To stop the slide show and return to the Pictures & Videos
screen, press
.
Playing a video
1. From the Pictures & Videos screen, Press the Menu soft
key and select Folders
→
My Device
→
My Documents
→
My Videos
.
2. Select a video folder, if necessary.
123
Multimedia
Note: Videos captured by the camera on the phone are stored
in the Mov-00 folder.
3. Scroll to the thumbnail image of the video clip you want
and press the Play soft key.
Beaming a file
You can send a picture or video clip to another phone via an
active infrared or Bluetooth connection.
For an Bluetooth connection, make sure that the Bluetooth
feature is active.
1. Open a folder, if necessary, and scroll to the file you
want.
2. Press the Menu soft key and select Beam...
.
3. For an IrDA connection, align the infrared ports on the
devices so that they are unobstructed and within a close
range.
Wait for the phone to search for available devices.
4. Scroll to a device and press the Beam soft key.
Switching to another folder
You can open files in any folder in the other directory of
your phone.
1. From Pictures & Videos screen, press the Menu soft key
and select Folders
.
2. Select a folder. If necessary, repeat this step to open a
subfolder.
124
Multimedia
Copying or moving files
1. From the Pictures & Videos screen, open the folder you
want and scroll to the file you want.
2. Press the Menu soft key and select Edit
→
Cut or Copy
.
3. Press the Menu soft key and select Folders
→
another
folder.
4. Press the Menu soft key and select Edit
→
Paste.
Deleting a file
1. From the Pictures & Videos screen, open the folder you
want and scroll to the file you want.
2. Press the Menu soft key and select Delete
.
3. Press the Yes soft key to confirm the deletion.
Customising settings
From the Pictures & Videos screen, press the Menu soft
key and select Options to access the following options:
•
General: allows you to select a maximum size of
pictures for sending via e-mail messages, or select a
rotating orientation.
•
Slide Show: allows you to select an orientation of a slide
show or set whether or not the slide show plays as a
screen saver when the phone is connected to a computer
and in Idle mode.
125
8
Extra programs
Games
Your phone includes fun games, such as Solitaire in Games.
You can also download and play new Java games.
To open Games:
On the Home screen, press the Start soft key and then the
More soft key twice, and select Games
.
Solitaire
The object of Solitaire is to use all the cards in the deck to
build up the four suit stacks in ascending order, beginning
with aces.
Playing a game
1. On the Start screen, select Solitaire
.
2. Move any aces on the seven stacks to the four card
spaces at the top of the screen and then make any other
available plays.
To move cards, press the number or character of the
card to move and then press the number or character of
the stack to which you want to move the card.
Note: Pressing the Up key moves a card to one of the four
stacks in the upper right corner of the screen if it
belongs there.
3. When you have made all available plays, press the Draw
soft key to turn over cards.
126
Extra programs
Funbox
Funbox is a folder where downloaded games are stored.
To download new games, press the Download soft key.
Your phone launches the WAP browser and loads the preset
website which provides you with the latest news and
information about games and game downloads.
To play a game, select one from the FunBox screen. How to
play may vary from game to game.
Calculator
The calculator allows you to perform general mathematical
functions, such as addition, subtraction, multiplication, and
division.
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories
→
Calculator
.
3. Enter the numbers and perform calculations by pressing
the Navigation keys (Up: +, Down: –, Left: /, Right: x).
4. To execute the calculation, press
.
127
Extra programs
Smart Converter
In Smart Converter, you can perform unit conversions.
1. On the Home Screen, press the Start soft key and then
the More soft key.
2. Select Accessories
→
Smart Converter
.
3. Select a converter type.
4. Select an original unit and enter the value to be
converted in the upper Unit field.
Note: Press
converter, press
or above zero.
to add a decimal point. In the temperature
to change the temperature to below
5. Select a target unit from the lower Unit field. The
equivalent value appears.
Notes
• To reverse the unit fields for continuous conversions, press
the Menu soft key and select Reverse
:
.
• For the currency converter, you may need to change
currency rates. Press the Menu soft key and Currency
rates
.
128
Extra programs
StopWatch
You can measure elapsed time interval.
1. On the Home screen, press the Start soft key and then
the More soft key.
2. Select Accessories and then More soft key. Press
StopWatch
.
3. Press the Start soft key to start the timer.
4. Press the Record soft key to check an interval.
You can do this step for a total of 99 intervals.
5. Press the Stop soft key to stop the stopwatch.
Voice Assist
Voice Assist is a speech recognition program that enables
you to launch programs or dial contacts by speaking an
associated command into the microphone.
Voice tips
• Speak clearly, naturally, and continuously.
• If you are in a very noisy environment, use the headset.
If you are not using the headset, address the internal
microphone at the bottom of the phone at a distance of
about 10 to 20 cm from your mouth.
• Speak when Voice Assist is ready to listen, as indicated
by the progress bar and after an audible beep.
• If Voice Assist does not clearly hear what you said, try
repeating your voice command.
129
Extra programs
Using Voice Command functions
On the Home screen, press the Start soft key on the Home
screen and select More soft key and press Voice Assist
.
Dialling a number
You can make a phone call by saying the name that has
been assigned to a contact in Contacts or the SIM card.
Note: To use the Name Dial feature, the name that you want
to dial must be in Contacts or the SIM card.
1. On the Voice Command screen, after a voice prompt
followed by a short beep, say “Name Dial”.
2. On the Name Dial screen, after a voice prompt followed
by a short beep, say a name in the following
manner:”<First Name + Last Name>”
If Voice Assist does not hear anything until the progress
bar moves to the end, you will be asked to repeat the
command up to 3 times.
Note: You can say “Call” and then a person’s name stored in
Contacts or on the SIM card to make a call by voice
command.
3. Your phone recognises your commnad and displays a list
of one or more names in the confirmation screen.
4. Scroll to the item you want to open and press the Ok
soft key.
130
Extra programs
5. If the selected name has more than one number, the
phone asks which number you want to dial.
6. If you press the Ok soft key or say nothing for 3
seconds, the phone dials the currently selected number.
Searching for contacts
You can retrieve contact information for any name in
Contacts or the SIM card by saying that name. Your phone
displays the information.
1. On the Voice command screen, after a voice prompt
followed by a short beep, say “Name Search”.
2. On the Name Search screen, after a voice prompt
followed by a short beep, say a name in the following
manner:”<First Name + Last Name>”
3. Your phone recognises your command and displays a list
of one or more names in the confirmation screen.
Opening programs by voice
You can use your voice to launch programs that exist in
Start menu.
1. On the Voice Command screen, after a voice prompt
followed by a short beep, say a program name in the
following manner:”Open <Program>”.
2. Your phone recognises your command and displays a list
of one or more applications in the confirmation screen.
Note: If Quick Launch is checked at Settings, this
confirmation step will be skipped and the best
recoginition result wil be excuted immediately.
131
Extra programs
Customising the Voice Command settings
You can customise the various settings for using Voice
Assist by pressing the Settings soft key on the Voice
Command screen.
•
Timeout: Adjust the maximum time to listen to your
commands.
•
Voice Guides:Check for more comprehensive voice
prompts and responses.
•
•
Quick Launch: Check to skip the confirmation.
Sensitivity: Ajust the sensitivity in which your phone
distinguishes the current voice and noise. Change the
setting if your phone has difficulty recognising your voice.
Picsel Viewer
Picsel Viewer allows you to view documents on your
phone without any file-conversion or loss of content.
To view a document, you must transfer documents from a
PC. If you have installed the memory card, you can view
the files stored in it.
By default, Picsel Viewer supports most common desktop
document formats, such as .doc, .xls, .ppt, .pdf and .wmf.
Note: Some document formats, such as .xls and .ppt, are not
transformed into their corresponding file types when
you copy them to your phone by using ActiveSync, so
that you cannot view the documents in the directory.
To avoid this case, change the conversion setting on the
ActiveSync screen on your computer.
132
Extra programs
To open Picsel Viewer:
On the Home screen, press the Start soft key and then the
More soft key, and select Picsel Viewer
.
Viewing a document
On the Picsel Viewer screen, the file directory of the phone
is displayed.
Go back to the
upper level
directory.
1. Select the folder containing the document you want.
If you have installed a memory card, Storage Card
appears to allow you to access files on the memory
card.
2. Select the document you want to open.
Adobe PDF:
, Microsoft World:
, Microsoft Power
, JPEG/
Point:
, Microsoft Excel: , Plain Text:
BMP/GIF/PNG:
133
Extra programs
Using options in a document view
From a document view, you can use the number keypad to
quickly perform an option. These are the keys you can use
and options assigned to each key.
•
•
•
•
Panning: To pan to a different part of the document,
press the Navigation keys to move to the direction you
want. You can also press
,
,
,
, respectively.
Zooming: To zoom in or out, press
to switch to zoom
mode and then press the Navigation keys. You can also
press or
.
Fitting to width: To fit the width of the page on screen,
press the Menu soft key and select Page Fit to width
You can also press
→
.
.
Navigating: To navigate the pages, press the Menu soft
key and select Page Next Page Previous Page
First page, or Last page. You can also press
or , respectively.
→
,
,
,
,
,
Viewing History
The history view shows you previously visited documents
as a small thumbnail-image of the document, and the
document’s name, location, and the date of your visiting.
To open the history view, press the Menu soft key and
select History
.
To access any of the documents from the history view,
select the small picture of that page.
Note: Documents will remain on the history list until a certain
number of days have passed. You can control this
period in the option. See page 135.
134
Extra programs
Viewing the Favourites list
For your favourite documents, you can keep a list in
Favourites. This looks similar to the history view but
includes only those pages you have explicitly added. Before
viewing the Favourites list, first you must add the pages to
the Favourites list.
To add the current page to the Favourites list:
1. Press the Menu soft key and select Favourites to
access the Favourites list.
2. Press the Add/Delete soft key and select Add
.
3. Enter the name you want and then press the OK soft
key.
To open a favourite page:
Access the Favourites list and select the thumbnail of the
page you want.
Changing Picsel Viewer settings
On the Picsel Viewer screen, press the Menu soft key and
select Settings. The following options are available:
•
Preferences: Set the period after which the thumbnail
pictures and descriptions of pages are removed from the
history memory. To clear the History list, select Clear
History
.
•
Files: Select the file types which can be displayed on the
Picsel Viewer screen. Select All to select all file formats.
•
•
Help: Shows the Help screen for using Picsel Viewer.
About: Shows information about the developers of Picsel
Viewer.
135
Extra programs
File Manager
The File Manager program allows you to open an explorer
window similar to a desktop Windows based system. The
explorer window allows you to navigate through your
phone to locate the desired folders and files.
You can also quickly manage, delete, copy, or edit any files
and folders on your phone.
Note: If you turn off the phone after storing some files in any
folders, except for the Storage folder, using ActiveSync,
all of the files in those folders will be deleted. Store
important files in the Storage folder to prevent them
from being deleted.
Accessing files
1. On the Home screen, press the Start soft key and
then the More soft key.
2. Select File Manager
.
The list of the folders in the phone’s memory displays.
3. Scroll to the folder that you want to view.
4. Select an item to open it.
136
Extra programs
Using file management options
From the file directory, you can use the number keypad to
quickly perform an option. The options can be accessed by
pressing the Menu soft key. These are the keys you can
use and options assigned to each key.
•
•
•
•
•
•
•
•
(
(
(
Folder Tree): Returns to the folder tree screen
Favorites): Opens the favorite file list.
Properties): Shows the file properties.
(
Scroll to Top): Moves to the top of the file list.
Refresh): Updates the file directory.
Scroll up): Scrolls up by one page.
Scroll to End): Moves to the end of the file list.
Search): Allows you to search for a file by entering a
(
(
(
(
keyword. The phone will search for files under the
currently accessed folder.
•
•
•
•
(
Scroll down): Scrolls down by one page.
(Select): Selects a file or folder.
(Unselect All): Deselects all checked files.
(Select All): Selects all files in the current folder.
In addition, you can access the following options:
• To use editing tools, press the Edit soft key.
• To create a new folder, press the Edit soft key and select
New Folder
• To send a file, press the Menu soft key and select Send
a sending option.
• To change the order of files or folders, press the Menu
soft key and select View a sort option.
.
→
→
137
Extra programs
SIM Manager
The SIM Manager program enables you to view the contact
cards stored on the SIM card and to copy the contact(s)
from the SIM card to the contact list on your phone. You
can also create a new contact card on the SIM card, edit,
and delete the contact card.
Viewing SIM contacts
1. On the Home screen, press the Start soft key and
then the More soft key.
2. Select Accessories
→
SIM Manager
.
The contact list is displayed on the SIM Manager screen.
3. From the SIM contact list:
• To create a new entry, press the New soft key.
• To register the phone number and name as the own
number on the SIM card, press the Menu soft key and
select Own Number
.
• To view the amount of the contacts, SMS messages,
and CB messages stored on the SIM card, press the
Menu soft key and select Memory Status
• To refresh the SIM contacts, press the Menu soft key
and select Refresh
.
.
138
Extra programs
Copying contact cards to the Contacts
application
You can copy a contact or all contacts stored on the SIM
card to the Contacts program.
1. On the SIM Manager screen, select the check box next
to the contact name you want to copy to your phone.
If you want to copy all contacts, press the Menu soft
key and select Check
→
Check All #.
2. Press the Menu soft key and select SIM Tool
→
Copy
to Contacts
.
3. To change the number category, press the Menu soft
key and select Change (M/H/W)
4. Press the Copy soft key
5. Press the OK soft key.
.
.
Using the SIM Manager options
On the SIM Manager screen, press the Menu soft key and
select SIM Tool. The following options are available.
•
•
•
View: shows the selected SIM entry.
Edit: allows you to edit the selected entry.
Delete Entries: allows you to delete the selected
entry(ies).
•
Dial: dials the number in the selected entry.
139
Extra programs
•
•
•
Send SMS: sends the SMS message using the number in
the selected entry.
Copy to Contacts: copies the selected entries to
Contacts.
Beam: allows you to send the selected entry via an
infrared connection.
Using the SMS Tool options
Sometimes, text messages may be stored on the SIM card,
depending on their specifications. To view these messages,
press the Menu soft key and select SMS Tool. You can
view a list of the sender’s phone numbers of the received
SMS messages stored on the SIM card.
On the SIM SMS Tool screen, press the Menu soft key to
move SIM messages from the SIM card to the phone’s
memory and view or delete an SMS message.
To jump across your selection between the SIM list and the
PDA list, press the Change soft key.
Task Manager
Your phone is a multi-tasking device. It can run more than
one program at the same time. However, multi-tasking
may cause hang-ups, freezing, memory problems, and
additional power consumption. To avoid these problems,
end unnecessary programs using Task Manager.
To open Task Manager:
On the Home screen, press the Start soft key and then the
More soft key, and select Accessories and then the More
soft key. Press Task Manager. The list of all the programs
currently running on your phone appears.
140
Extra programs
Managing running programs
• To activate a program, press the Menu soft key and
select Activate
.
• To close a program, press the Stop soft key. To close all
programs, press the Menu soft key and select Stop All
.
• To refresh the program list, press the Menu soft key and
select Refresh
.
Checking the memory status
You can check the memory in use for running programs or
storing files and information. Press the Menu soft key and
select Memory
.
Checking the storage memory
You can check the memory in use for storing files in each
storage device: Storage Card and Storage. On the Task
Manager screen, press the Menu soft key and select
Storage
.
To format the memory card, press the Menu soft key and
select Format Storage Card
.
141
9
Getting connected
You can use your phone to exchange information with other
mobile devices as well as your desktop computer, a
network, or the Internet. You have the following connection
options:
• Use the infrared (IR) port on your device to send and
receive files between two devices.
• Exchange information between devices with Bluetooth
capabilities without a physical connection.
• Connect the phone to your computer using a USB or IrDA
connection to use the phone as a modem.
• Connect to your Internet service provider (ISP) or the
network at your company. Once connected, you can send
or receive e-mail and instant messages, and browse the
Internet or intranet.
Beaming with infrared connections
Your phone can send and receive files to and from other IR
devices. In most cases, you can also receive files from your
PC when it is equipped with an infrared port. The two
devices must be aimed at each other approximately 10
centimetres apart.
142
Getting connected
If you have difficulty getting the two devices to send or
receive data, try the following:
• Make sure that the infrared port windows are clear
and free of any dirt or obstructions and that there are
no obstacles between the infrared port windows.
• Adjust the room lighting or move to another location.
Some types of lighting may interfere with
transmission.
Note: Your phone’s IrDA function is only compatible with
Microsoft Smart Phones and Windows 2000/XP
computers.
Activating or deactivating IrDA reception
You must activate the infrared port to let your phone to
detect incoming IR transmissions and receive data.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Connections
→
Beam.
3. Select Receive incoming beams
.
4. Press the Done soft key.
Receiving data
1. Make sure that your phone’s display is activate and align
the infrared port on your phone with the one on another
device.
Note: The display on your phone must be active.
2. Have the other device send the data to your phone.
3. When prompted to receive an incoming data, press the
Yes soft key.
143
Getting connected
Sending data
1. Open the item you want in a program
.
2. Press the Menu soft key and select Beam, followed by
the type of item, such as Contact or Appointment.
If you send an item in File Manager, press the Menu
soft key and select Send
→
via IR.
3. Align the infrared port on your phone with the one on
the other device.
The two devices starts an IrDA connection and the other
device name appears on your phone.
4. Press the Beam soft key.
Note: The display on your phone must be active.
Beaming with Bluetooth
Bluetooth is a short-range wireless communications
technology. Devices with Bluetooth capabilities can
exchange data over a distance of about 10 metres without
requiring a physical connection.
Unlike infrared, you do not need to line up the phone with
another device to beam information with Bluetooth.
Activating Bluetooth mode
1. On the Home screen, press the Start soft key.
144
Getting connected
2. Select Settings
→
More...
→
Connections
→
Bluetooth Bluetooth
→
.
3. On the Bluetooth screen, select the operating mode you
want in the Bluetooth field.
You can use the following operating mode:
•
•
•
On: The Bluetooth radio is turned on and you can use
Bluetooth features.
Off: The Bluetooth radio is turned off. You can neither
send nor receive data by using Bluetooth.
Discoverable: The Bluetooth radio is turned on, and
all of the other Bluetooth devices within range (about
10 meters) can detect your device and attempt to
beam data to your device, establish a bond, or use a
Bluetooth service.
4. Press the Done soft key.
Searching for and pairing with a Bluetooth
device
1. On the Bluetooth screen, press the Menu soft key and
select Devices
.
2. To search for a new device, press the Menu soft key and
select New
.
3. Wait for the phone to search for Bluetooth devices.
4. Select the device you want.
5. Enter a Bluetooth passkey and press the Next soft key.
This passkey is used just once and you do not need to
memorise it.
145
Getting connected
When the owner of the other device enters the same
passkey, paring is finished.
Note: Some devices, especially headsets or hands-free car
kits, may have a fixed Bluetooth passkey, such as
0000. If the other device has one, you must enter the
passkey.
6. Enter a display name for the other device and press the
Next soft key.
7. Press the OK soft key.
Using the device options
When you press the Menu soft key from the device list,
you can access the following options:
•
•
New: allows you to search for any devices.
Edit: allows you to change the name of the connectable
device.
•
•
Delete: allows you to delete the device.
Set as Hands-free: allows you to use the connectable
device as a hands-free kit. You can converse with the
other person on the phone without holding the phone to
your ear during a call.
•
Set as wireless Stereo: allows you to play the audio
files.
146
Getting connected
Receiving data with Bluetooth
1. When a notification that a remote device is trying to
connect to your phone, press the Bluetooth passkey
entered from the device and press the Next soft key.
2. When prompted to receive an incoming data, press the
Yes soft key.
Modem link
Using Modem Link, you can set your phone to be used as
an external modem for another device or computer when
connected via the USB port or infrared port.
1. Make sure that your phone is not connected with
another device.
2. On the Home screen, press the Start soft key and
then the More soft key.
3. Select Accessories
→
Modem Link.
4. If you first access this program, press the Done soft
key.
5. Select the type of connection, baud rate, and access
point name.
6. Press the Activate soft key to activate Modem Link.
7. Press the Done soft key.
Note
:
• When Modem Link is activated, you cannot use ActiveSync.
• When Windows Service Pack 2 is used, Internet access using
Modem Link is more stable.
147
Getting connected
Connecting to the Internet or your
network
You can use the Connections settings to create dial-up,
Virtual Private Network (VPN), GPRS, and proxy
connections so that you can connect to the Internet or your
corporate network. By using a data connection, you can
browse the Internet, download e-mails, chat by using
MSN® Messenger, or synchronise remotely with an
Exchange Server. Check with your service provider to see if
a data connection has already been set up for you, and if
over-the-air configuration is supported.
Creating a dial-up connection
You can create a dial-up connection to connect remotely to
the Internet, a Wireless Application Protocol (WAP)
network, or your corporate network. Then, when you open
a program that is configured to use this connection, the
phone uses it to automatically connect to the network.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Connections
→
Dial up.
3. Press the Menu soft key and select Add
.
4. Enter the requested information.
•
•
Description: Enter a name for the connection.
Connects to: Select a type of network for which the
connection will be used.
•
•
Phone number: Enter the dial-up number you use to
connect to the network.
User name: Enter your network user name.
148
Getting connected
•
•
Password: Enter your password.
Domain: Enter the domain name, if required.
Notes
:
• If you are not sure about the information to enter, ask your
service provider.
• If you subscribe to General Packet Radio Service (GPRS),
you can set up a GPRS connection to access your corporate
network or the Internet, which is faster than a dial-up
connection. For details, see “Creating a GPRS connection.”
5. When you have finished, press the Done soft key.
Creating a GPRS connection
If you subscribe to General Packet Radio Services (GPRS),
you can set up a GPRS connection to gain access to your
corporate network or the Internet. This is faster than a
dial-up connection.
You can also use your phone as a GPRS modem for a
desktop computer.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Connections
→
GPRS.
3. Press the Menu soft key and select Add
.
4. Enter the requested information.
•
•
Description: Enter a name for the connection.
Connects to: Select a network type for which the
connection will be used.
149
Getting connected
•
•
Access point: Enter the information provided by your
system administrator.
User name: Enter your user name for the GPRS
network.
•
•
Password: Enter your password.
Primary DNS: Enter the primary domain naming
system (DNS) address.
•
•
Secondary DNS: Enter the secondary DNS address.
IP address: Enter the Internet Protocol (IP) address.
Note: If you are not sure about the information to enter, ask
your network administrator.
5. When you have finished, press the Done soft key.
Creating a proxy connection
You can use a proxy connection to gain access to the
Internet over an existing connection to your corporate
network.
1. On the Home screen, press the Start soft key.
2. Select Settings
→
More...
→
Connections
→
Proxy.
3. Press the Menu soft key and select Add
.
4. Enter the requested information.
•
•
Description: Enter a name for the connection.
Connects from: Select the type of network from
which you will connect.
•
Connects to: Select the type of network to which you
will connect.
150
Getting connected
•
•
•
•
Proxy (name:port): Enter the proxy server name
and port number in the form.
Type: Select a network type for which proxy
connection will be used.
User name: Enter your user name for the network to
which you will connect.
Password: Enter your password.
Note: If you are not sure about the information to enter, ask
your service provider.
5. When you have finished, press the Done soft key.
Creating a VPN connection
If your company has set up a virtual private network
(VPN), you can create a VPN connection to gain access to
your corporate network over an Internet connection.
1. On the Home screen, press the Start soft key.
2. Select Settings
VPN
→
More...
→
Connections
→
More...
→
.
3. Press the Menu soft key and select Add
.
4. Enter the requested information.
•
•
•
•
Description: Enter a name for the connection.
VPN type: Select the type of VPN.
Server: Enter the VPN server name.
Connects from: Select the type of network from
which you will connect to VPN (typically The
Internet).
151
Getting connected
•
Connects to: Select the type of network to which you
will connect (typically Work).
•
•
•
•
User name: Enter your user name for the VPN.
Password: Enter your password.
Domain: Enter the domain name, if required.
IPSec authentication: If you selected IPSec
for VPN type, select the type of authentication.
IPSec Pre-shared key: If you selected Pre Shared
Key for IPSec authentication, enter the shared key.
/L2TP
•
-
Note: If you are not sure about the information to enter, ask
your network administrator.
5. When you have finished, press the Done soft key.
Setting up data connections
After creating connection profiles, you can assign a profile
to each network type.
1. On the Connections screen, press the Menu soft key
and select Advanced
.
2. Select a connection profile in each network.
3. Press the Done soft key.
152
Getting connected
Adding a URL exception
Some URLs for Web pages on your company intranet may
use periods, for example: intranet.companyname.com. To
view these pages in Internet Explorer, you must create a
URL exception.
Note: You do not need to create URL exceptions for Internet
URLs.
1. On the Connections screen, press the Menu soft key
and select Advanced
.
2. Press the Menu soft key and select Work URL
Exceptions
.
3. Press the Menu soft key and select Add
.
4. Enter the URL and press the Done soft key. Separate
multiple URLs with a semicolon.
Changing the data connection options
On the Advanced screen, press the Menu soft key and
select Options to access the following options:
•
Redial attempts: Select the redial attempt to connect
the Internet or your network after an unsuccessful
connection.
•
Idle disconnect after: Select the length of time your
phone waits for connecting to the Internet or your
network after the specified period, your phone will
disconnect from the Internet or your network.
•
My desktop connects to: Select the type of network to
which your desktop computer will connect.
153
10
Troubleshooting
General problems
Problem
Description & Solution
Check that the SIM card has been
“Invalid or
missing SIM card. correctly installed.
You can still make
emergency calls if
your service
provider supports
it” displays
“No network
• The network connection has been lost.
coverage,” “Error
unable to connect.
No network
You may be in a weak signal area (in a
tunnel or surrounded by buildings).
Move and try again.
coverage.” or
“Message sending
failed” displays
• You are trying to access an option for
which you have not taken out a
subscription with your service provider.
Contact the service provider for further
details.
The bars next to
disappear
• If you have just turned on your phone,
wait about 2 minutes, until your phone
finds the network and receives a signal
from the network.
• If you are in a tunnel or in an elevator,
the phone may not be able to receive
the network signal properly. Move to
an open place.
• This may appear when you move
between different service areas. It is
normal.
The display is not In direct sunlight, you may not see the
clear
display clearly. Moving to a place with
different lighting should solve this
problem.
154
Troubleshooting
Problem
Description & Solution
White lines
appear on the
display
This may happen if you turn on the
phone after a long period of disuse, or
after removing the battery without
turning off the phone. This is not related
to the phone’s life or performance. The
display should correct itself shortly.
“PIN code”
appears
• You are using your phone for the first
time. You must enter the Personal
Identification Number (PIN) supplied
with the SIM card.
• The PIN check feature has been
enabled. Each time the phone is
switched on, the PIN has to be
entered. To disable this feature, press
the Start soft key and select Settings
→
More...
→
Security
→
Disable SIM
PIN, and enter the PIN.
“PUK Required”
appears
The PIN code was entered incorrectly
three times in succession and the SIM
card is now blocked. Enter the PUK
supplied by your service provider.
I forgot the lock,
If you forget or lose the lock code,
PIN, initialisation, contact your phone dealer. If you forget
or PUK codes
or lose a PIN or PUK code, or if you have
not received such a code, contact your
network provider. For information about
passwords, contact your access point
provider, for example, a commercial
Internet Service Provider (ISP), service
provider, or network operator.
155
Troubleshooting
Call problems
Problem
Description & Solution
• Be sure that you have pressed
• Check if your wireless connection to
your mobile service provider is
switched on and the signal from the
network is unobstructed.
I have entered a
number but it was
not dialled
• You may have set an outgoing call
barring option.
My correspondent • Be sure that your phone is switched on
cannot reach me pressed for more than one second)
(
• Check if your wireless connection to
your mobile service provider is
switched on and the signal from the
network is unobstructed.
• You may have set an incoming call
barring option.
My correspondent • Be sure that you have switched on the
cannot hear me
speaking
microphone
• Make sure that the phone is close
enough to your mouth The microphone
is located at the bottom of the phone.
The audio quality
of the call is poor
• Adjust the voice volume by pressing
.
• Check the signal strength indicator on
the display ( ); the number of bars
indicates the signal strength, from
strong to weak.
• Try moving the phone slightly or
moving closer to a window if you are in
a building.
156
Troubleshooting
Problem
Description & Solution
Calls to and from
the phone are not
connected
properly, and are
easily
• Signals from the network are weak.
Move to another area.
• Touching the antenna area on the top
of the phone may lower the call quality.
Be careful not to touch the antenna
area while using the phone.
disconnected
Power and charging problems
Problem
Description & Solution
While charging,
the LED on the
travel charger
blinks
• Disconnect the phone from the travel
charger, remove the battery, and then
replace it. Try charging again.
• If the problem persists, clean the
metal contacts on the battery and the
phone.
• If the actions above do not clear the
problem, contact a Samsung service
representative.
The phone
malfunctions or
Remove the battery and then replace it.
Turn on the phone. Or press the hole on
does not function the bottom of the phone to perform a
soft reset. If the problem persists,
contact a Samsung service
representative.
The LED on the
travel charger
turns to yellow
The travel charger is overheated.
Disconnect the charger from the phone
or unplug it from the power outlet. Wait
until the charger cools down and then
recharge the phone.
157
Troubleshooting
Problem
Description & Solution
The battery’s
standby time is
shorter than
expected
• Batteries are subject to wear and tear.
Standby time may grow shorter as
time passes.
• Leaving the fully charged battery in a
cold or hot place for a long period of
time may reduce battery life.
• Standby time depends on where you
use the phone. The actual time may
differ from the battery’s specifications.
Is it OK if I leave
the phone
We recommend that you disconnect the
phone from the charger or unplug the
charger from the power outlet.
connected to the
power outlet after
it is fully charged
(indicated by the
green LED on the
charger is on)
The phone
becomes hot
This may happen when you are on the
phone or when you use programs, such
as games, the Internet, or the camera,
because the phone needs more power at
those times. This does not affect the
phone’s life and performance.
The battery level
seem sufficient,
but the phone
• Remove the battery from the phone
and reinstall it. Then turn on the
phone.
does not turn on
• Clean the metal contacts both on the
battery and on the phone. Reinstall the
battery and turn on the phone.
The phone turns
off when the
charger is
Some dust on the contacts may cause
unexpected power-off or charging
problems. Clean the metal contacts both
on the battery and on the phone.
connected
158
Troubleshooting
Application problems
Problem
Description & Solution
“Not enough
memory to
perform
To view what kind of data you have and
how much memory the different data
groups consume, press the Start soft
operation. Delete key and then the More soft key, and
some data first.”
or “Memory low.
Delete some
select Accessories and then the More
soft key , and press Task Manager
Press the Menu soft key and select
Memory. Delete old items from
programs. If necessary, make a backup
copy of your data using ActiveSync or
the memory card.
.
data.” displays
Browser
“Unable to
Insert proper browser settings. Contact
your service provider for instructions.
connect. Verify
your Dial-up or
proxy settings are
correct, and try
again.” displays
The phone is
unable to connect
to the Internet
• Check if you have set up and are
connected to an Internet service
provider.
• Check if your wireless connection to
your mobile service provider is
switched on and the signal from the
GPRS network is not obstructed.
• Verify with your service provider that
your user name and password are
correct.
• Verify with your Internet service
provider that the network you are
trying to connect is available, or try to
connect it from another PC.
159
Troubleshooting
Problem
Camera
Description & Solution
Images seem
smudged
Check that the camera lens protection
window is clean.
Contacts
No number is
dialled when you
recall a contact
card
• Check that a number has been stored
in the contact card.
• Re-store the number, if necessary.
Infrared
Data does not
transfer via an
infrared
• Line up the infrared ports of two
devices so that they are unobstructed
and within close range.
connection
• Make sure that nothing is between the
two infrared ports.
• Adjust the room lighting. Some types
of light interfere with infrared
connections. Try moving to a different
location or turning off some lights.
Bluetooth
I cannot end a
Bluetooth
connection
If another device is connected to your
phone, you can either end the
connection using the other device or by
deactivating Bluetooth. Go toBluetooth
and select Bluetooth
→
Off.
160
Troubleshooting
Problem
Description & Solution
I cannot find my
friend’s
• Check that both have activated
Bluetooth.
Bluetooth-
enabled device
• Check that the distance between the
two devices is not over 10 metres or
that there are no walls or other
obstructions between the devices.
• Check that the other device is not in
Hidden mode.
• Check that both devices are
compatible.
I cannot discover
the remote
• Check if the Bluetooth functionality on
the phone is turned on.
Bluetooth stereo
headset
• Check if the remote Bluetooth stereo
headset is in the discoverable mode.
• Check if the remote Bluetooth device
has the capability to act as a stereo
headset.
I cannot connect
to the remote
Bluetooth stereo
headset
Ensure that the correct passkey was
entered on the phone during the
connection with the headset. Most
Bluetooth headsets have a fixed passkey
that would be mentioned in their user’s
guide. You would need to enter the
passkey when establishing a connection
with the headset.
161
Troubleshooting
Problem
Description & Solution
I cannot listen to
music on the
• Ensure that you are connected to the
Bluetooth stereo headset.
remote Bluetooth
stereo headset
• Ensure that the song that you are
playing is one of the supported
formats.
• Check the battery levels on the
Bluetooth stereo headset.
• Ensure that the phone and headset are
within range of each other. The
maximum distance between the two
should not be more than 10 metres.
There are breaks
in the music being
played on the
• You may observe breaks if there are
walls that separate the phone and the
Bluetooth stereo headset.
remote Bluetooth
stereo headset
• Be sure that the Bluetooth
functionality on the phone is turned on
and you have set the phone to be
detected by other devices.
Call history
The call history
appears empty
You may have activated a filter, and no
communication events fitting that filter
have been logged. To see all events,
press the Start soft key and select Call
History. Press the Menu soft key and
select Filter
→
No Filter
.
Messaging
I cannot select a
If the contact card does not have a
contact card when phone number or e-mail address, you
creating a
message
cannot select it. Add the missing
information to the contact card in
Contacts
.
162
Troubleshooting
Problem
Description & Solution
PC connectivity
Problems occur
when connecting
Make sure that ActiveSync is installed
and running on your PC. See the user’s
the phone to a PC guide for ActiveSync on the CD-ROM.
ActiveSync, see the help function on
ActiveSync or visit www.microsoft.com.
If the above guidelines do not help you to solve the
problem, take note of:
• the model and serial numbers of your phone
• your warranty details
• a clear description of the problem
Then contact your local dealer or Samsung after-sales
service.
163
11
Regulatory notices
SAR certification information
This phone meets European Union (EU) requirements
concerning exposure to radio waves.
Your mobile phone is a radio transmitter and receiver. It is
designed and manufactured so as not to exceed the limits
for exposure to radio-frequency (RF) energy, as
recommended by the EU Council. These limits are part of
comprehensive guidelines and establish permitted levels of
RF energy for the general population. The guidelines were
developed by independent scientific organisations through
the periodic and thorough evaluation of scientific studies.
The limits include a substantial safety margin designed to
ensure the safety of all persons, regardless of age and
health.
The exposure standard for mobile phones employs a unit of
measurement known as SAR (Specific Absorption Rate).
The SAR limit recommended by the EU Council is 2.0W/Kg.*
The highest SAR value for this model phone was 0.774 w/
Kg.
* The SAR limit for mobile phones used by the public is 2.0 watts/kilogram (W/
kg) averaged over ten grams of body tissue. The limit incorporates a
substantial margin of safety to give additional protection for the public and to
account for any variations in measurements. The SAR values may vary
depending on national reporting requirements and the network band.
164
Regulatory notices
SAR tests are conducted using standard operating positions
with the phone transmitting at its highest certified power
level in all tested frequency bands. Although the SAR is
determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below
the maximum value. This is because the phone is designed
to operate at multiple power levels so as to use only the
power required to reach the network. In general, the closer
you are to a base station, the lower the power output of the
phone.
Before a new model phone is made available for sale to the
public, compliance with the European R&TTE Directive must
be shown. This directive includes as one of its essential
requirements the protection of the health and safety of the
user and any other person.
European union notice
Products with CE marking comply with the R&TTE Directive
(99/5/EC), the EMC Directive (89/336/EEC) and the Low
Voltage Directive (73/23/EEC) issued by the Commission of
the European Community.
Compliance with these directives implies conformity to the
following European Norms (in brackets are the equivalent
international standards):
• EN 60950 (IEC 60950) - Safety of Information
Technology Equipment
• ETS 300 342-1 (June 1997) - Electromagnetic
compatibility and Radio spectrum Matters (ERM);
ElectroMagnetic Compatibility (EMC) for European digital
cellular telecommunications system (GSM 900MHz, GSM
1800MHz, and GSM 1900MHz); Part 1: Mobile and
portable radio and ancillary equipment
165
Regulatory notices
• GSM11.10
• ANSI/IEEE C.95.1-1992- specific absorption rate in
mobile phone emission condition for body health
• FCC part 15 and part24
• prENV50166-2, 1995 for SAR
• SAR: 0.774mW/10g
Important safety information
Retain and follow all product safety and operating
instructions. Observe all warnings on the product and in
the operating instructions.
To reduce the risk of bodily injury, electric shock, fire, and/
or damage to the equipment, observe the following
precautions:
General precautions
Heed service markings: Except as explained elsewhere
in the Operating or Service documentation, do not service
any product yourself. Service needed on components inside
these compartments should be done by an authorised
service technician or provider.
Damage requiring service: Unplug the product from the
electrical outlet and refer servicing to an authorised service
technician or provider under the following conditions:
• Liquid has been spilled or an object has fallen into the
product.
• The product has been exposed to rain or water.
166
Regulatory notices
• The product has been dropped or damaged.
• There are noticeable signs of overheating.
• The product does not operate normally when you follow
the operating instructions.
Avoid hot areas: The product should be placed away from
heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
Avoid wet areas: Never use the product in a wet location.
Avoid pushing objects into product: Never push objects
of any kind into cabinet slots or other openings in the
product. Slots and openings are provided for ventilation.
These openings must not be blocked or covered.
Mounting Accessories: Do not use the product on an
unstable table, cart, stand, tripod, or bracket. Any
mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory
recommended by the manufacturer.
Avoid unstable mounting: Do not place the product with
an unstable base.
Use product with approved equipment: This product
should be used only with personal computers and options
identified as suitable for use with your equipment.
Adjust the volume: Turn down the volume before using
headphones or other audio devices.
Cleaning: Unplug the product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol cleaners.
Use a damp cloth for cleaning, but NEVER use water to
clean an LCD screen.
167
Regulatory notices
Safety precautions for power supply
unit
Use the correct external power source: A product should be
operated only from the type of power source indicated on
the electrical ratings label. If you are not sure of the type of
power source required, consult your authorised service
provider or local power company. For a product that
operates from battery power or other sources, refer to the
operating instructions that are included with the product.
Handle battery packs carefully: This product contains a
Lithium Polymer battery.
There is a risk of fire and burns if the battery pack is
handled improperly. Do not attempt to open or service the
battery pack. Do not disassemble, crush, puncture, short
external contacts or circuits, dispose of in fire or water, or
expose a battery pack to temperatures of higher than 60°C
(140°F).
Note: Danger of explosion if battery is incorrectly replaced.
Replace only with specified batteries. Dispose of used
batteries according to the local regulations or reference
guide supplied with your product.
168
Regulatory notices
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of
the reach of small children and pets. They may
inadvertently damage these things or choke on small
parts.
• Keep the phone dry. Precipitation, humidity and liquids
contain minerals that corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may
cause an electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures
can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone
warms up to its normal operating temperature, moisture
can form inside the phone, which may damage the
phone’s electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling
can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
169
Regulatory notices
• Do not paint the phone. Paint can clog the device’s
moving parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may
explode when overheated.
• When the phone or battery gets wet, the label indicating
water damage inside the phone changes colour. In this
case, phone repairs are no longer guaranteed by the
manufacturer's warranty, even if the warranty for your
phone has not expired.
• If your phone has a flash or light, do not use it too close
to the eyes of people or animals. This may cause damage
to their eyes.
• Use only the supplied or an approved replacement
antenna. Unauthorised antennas or modified accessories
may damage the phone and violate regulations governing
radio devices.
• If the phone, battery, charger or any accessory is not
working properly, take it to your nearest qualified service
facility. The personnel there will assist you, and if
necessary, arrange for service.
170
Regulatory notices
Microsoft End User License
Agreement
• You have acquired a device (“DEVICE”) that includes
software licensed by Samsung Electronics Co., Ltd. from
an affiliate of Microsoft Corporation (“MS”), for use in
connection with wireless network services provided under
separate agreement between you and a wireless
telecommunications provider (“Mobile Operator”). Those
installed software products of MS origin, as well as
associated media, printed materials, and “online” or
electronic documentation (“SOFTWARE”) are protected
by international intellectual property laws and treaties.
The SOFTWARE is licensed, not sold. All rights reserved.
• IF YOU DO NOT AGREE TO THIS END USER LICENSE
AGREEMENT (“EULA”), DO NOT USE THE DEVICE OR
COPY THE SOFTWARE. INSTEAD, PROMPTLY CONTACT
SAMSUNG ELECTRONICS CO., LTD. FOR INSTRUCTIONS
ON RETURN OF THE UNUSED DEVICE(S) FOR A REFUND.
ANY USE OF THE SOFTWARE, INCLUDING BUT NOT
LIMITED TO USE ON THE DEVICE, WILL
CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR
RATIFICATION OF ANY PREVIOUS CONSENT).
• SOFTWARE includes software already installed on the
DEVICE (“DEVICE Software”) and MS software
contained on the CD-ROM disk (“Companion CD”).
171
Regulatory notices
GRANT OF SOFTWARE LICENSE
This EULA grants you the following license:
DEVICE Software. You may use the DEVICE Software as
installed on the DEVICE. All or certain portions of the
DEVICE Software may be inoperable if you do not have and
maintain a service account with an appropriate Mobile
Operator, or if the Mobile Operator's network facilities are
not operating or configured to operate with the DEVICE
software.
COMPANION CD. Additional software for your personal
computer is included with your DEVICE, and you may
install and use the Microsoft® ActiveSync® component on
one (1) or more computers to exchange information with
one (1) or more computing devices that contain a
compatible version of the Microsoft® phone 2003
Software. For other software component(s) contained in
the Companion CD, you may install and use such
components only in accordance with the terms of the
printed or online end user license agreement(s) provided
with such component(s). In the absence of an end user
license agreement for particular component(s) of the
Companion CD, you may install and use only one (1) copy
of such component(s) on the DEVICE or a single computer
with which you use the DEVICE.
Microsoft® Outlook® 2002. If Microsoft Outlook 2002 is
included with your Device, the following terms apply to
your use of Microsoft Outlook 2002: (i) regardless of the
information contained in “Software Installation and Use”
section of the online EULA you may install one (1) copy of
Microsoft Outlook 2002 on one (1) computer to use,
exchange data, share data, access and interact with the
DEVICE, and (ii) the EULA for Microsoft Outlook 2002 is
between the Company and the end user - not between the
PC manufacturer and end user.
172
Regulatory notices
DESCRIPTION OF OTHER RIGHTS
AND LIMITATIONS
•
Speech/Handwriting Recognition. If the SOFTWARE
includes speech and/or handwriting recognition
component(s), you should understand that speech and
handwriting recognition are inherently statistical
processes; that recognition errors are inherent in the
processes; and that errors can occur in the component's
recognition of your handwriting, and the final conversion
into text. Neither Samsung Electronics Co., Ltd. nor its
suppliers shall be liable for any damages arising out of
errors in the speech and handwriting recognition
processes.
•
Limitations on Reverse Engineering, Decompilation
and Disassembly. You may not reverse engineer,
decompile, or disassemble the SOFTWARE, except and
only to the extent that such activity is expressly
permitted by applicable law notwithstanding this
limitation.
•
•
Single DEVICE. The DEVICE Software is licensed with
the DEVICE as a single integrated product. The DEVICE
Software installed in read only memory (“ROM”) of the
DEVICE may only be used as part of the DEVICE.
Single EULA. The package for the DEVICE may contain
multiple versions of this EULA, such as multiple
translations and/or multiple media versions (e.g., in the
user documentation and in the software). Even if you
receive multiple versions of the EULA, you are licensed to
use only one (1) copy of the DEVICE Software.
173
Regulatory notices
•
NOTICE REGARDING THE MPEG-4 VISUAL
STANDARD. The SOFTWARE may include MPEG-4 visual
decoding technology. MPEG LA, L.L.C. requires the
following notice:
USE OF THIS SOFTWARE IN ANY MANNER THAT
COMPLIES WITH THE MPEG 4 VISUAL STANDARD IS
PROHIBITED, EXCEPT FOR USE DIRECTLY RELATED TO
(A) DATA OR INFORMATION (i) GENERATED BY AND
OBTAINED WITHOUT CHARGE FROM A CONSUMER NOT
THEREBY ENGAGED IN A BUSINESS ENTERPRISE, AND
(ii) FOR PERSONAL USE ONLY; AND (B) OTHER USES
SPECIFICALLY AND SEPARATELY LICENSED BY MPEG LA,
L.L.C.
If you have questions regarding this Notice, please
contact MPEG LA, L.L.C., 250 Steele Street, Suite 300,
Denver, Colorado 80206; Telephone 303 331.1880; FAX
303 331.1879
•
•
Rental. You may not rent or lease the SOFTWARE.
Software Transfer. You may not permanently transfer
any of your rights under this EULA with regard to the
DEVICE Software or Companion CD, except as permitted
by the applicable Mobile Operator. In the event that the
Mobile Operator permits such transfer, you may
permanently transfer all of your rights under this EULA
only as part of a sale or transfer of the DEVICE, provided
you retain no copies, you transfer all of the SOFTWARE
(including all component parts, the media and printed
materials, any upgrades, this EULA and, if applicable, the
Certificate(s) of Authenticity), and the recipient agrees to
the terms of this EULA. If the SOFTWARE is an upgrade,
any transfer must include all prior versions of the
SOFTWARE.
174
Regulatory notices
•
•
Termination. Without prejudice to any other rights,
Samsung Electronics Co., Ltd. or MS may terminate this
EULA if you fail to comply with the terms and conditions
of this EULA. In such event, you must destroy all copies
of the SOFTWARE and all of its component parts.
Security Updates. The SOFTWARE may include digital
rights management technology. If SOFTWARE does
contain digital rights management technology, content
providers are using the digital rights management
technology (“Microsoft DRM”) contained in the
SOFTWARE to protect the integrity of their content
(“Secure Content”) so that their intellectual property,
including copyright, in such content is not
misappropriated. Owners of such Secure Content
(“Secure Content Owners”) may, from time to time,
request MS, Microsoft Corporation or their subsidiaries to
provide security related updates to the Microsoft DRM
components of the SOFTWARE (“Security Updates”) that
may affect your ability to copy, display and/or play
Secure Content through Microsoft software or third party
applications that utilize Microsoft DRM. You therefore
agree that, if you elect to download a license from the
Internet which enables your use of Secure Content, MS,
Microsoft Corporation or their subsidiaries may, in
conjunction with such license, also download onto your
DEVICE such Security Updates that a Secure Content
Owner has requested that MS, Microsoft Corporation or
their subsidiaries distribute. MS, Microsoft Corporation or
their subsidiaries will not retrieve any personally
identifiable information, or any other information, from
your DEVICE by downloading such Security Updates.
175
Regulatory notices
•
Consent to Use of Data. You agree that MS, Microsoft
Corporation and their affiliates may collect and use
technical information gathered in any manner as part of
product support services related to the SOFTWARE. MS,
Microsoft Corporation and their affiliates may use this
information solely to improve their products or to provide
customized services or technologies to you. MS, Microsoft
Corporation and their affiliates may disclose this
information to others, but not in a form that personally
identifies you.
•
Internet Gaming/Update Features. If the SOFTWARE
provides, and you choose to utilize, the Internet gaming
or update features within the SOFTWARE, it is necessary
to use certain computer system, hardware, and software
information to implement the features. By using these
features, you explicitly authorize MS, Microsoft
Corporation and/or their designated agent to use this
information solely to improve their products or to provide
customized services or technologies to you. MS or
Microsoft Corporation may disclose this information to
others, but not in a form that personally identifies you.
•
Internet-Based Services Components. The
SOFTWARE may contain components that enable and
facilitate the use of certain Internet-based services. You
acknowledge and agree that MS, Microsoft Corporation or
their affiliates may automatically check the version of the
SOFTWARE and/or its components that you are utilizing
and may provide upgrades or supplements to the
SOFTWARE that may be automatically downloaded to
your Device.
176
Regulatory notices
•
Links to Third Party Sites. The SOFTWARE may
provide you with the ability to link to third party sites
through the use of the SOFTWARE. The third party sites
are not under the control of MS, Microsoft Corporation or
their affiliates. Neither MS nor Microsoft Corporation nor
their affiliates are responsible for (i) the contents of any
third party sites, any links contained in third party sites,
or any changes or updates to third party sites, or (ii)
webcasting or any other form of transmission received
from any third party sites. If the SOFTWARE provides
links to third party sites, those links are provided to you
only as a convenience, and the inclusion of any link does
not imply an endorsement of the third party site by MS,
Microsoft Corporation or their affiliates.
•
Additional Software/Services. The SOFTWARE may
permit Samsung Electronics Co., Ltd., MS, Microsoft
Corporation or their affiliates to provide or make
available to you SOFTWARE updates, supplements, add-
on components, or Internet-based services components
of the SOFTWARE after the date you obtain your initial
copy of the SOFTWARE (“Supplemental Components”).
• If Samsung Electronics Co., Ltd. provides or makes
available to you Supplemental Components and no other
EULA terms are provided along with the Supplemental
Components, then the terms of this EULA shall apply.
• If MS, Microsoft Corporation or their affiliates make
available Supplemental Components, and no other EULA
terms are provided, then the terms of this EULA shall
apply, except that the MS, Microsoft Corporation or
affiliate entity providing the Supplemental Component(s)
shall be the licensor of the Supplemental Component(s).
177
Regulatory notices
• Samsung Electronics Co., Ltd., MS, Microsoft Corporation
and their affiliates reserve the right to discontinue any
Internet-based services provided to you or made
available to you through the use of the SOFTWARE.
UPGRADES AND RECOVERY MEDIA
•
DEVICE Software. If the DEVICE Software is provided
by Samsung Electronics Co., Ltd. separate from the
DEVICE on media such as a ROM chip, CD ROM disk(s) or
via web download or other means, and is labeled “For
Upgrade Purposes Only”, you may install one copy of
such DEVICE Software onto the DEVICE as a replacement
copy for the existing DEVICE Software and use it in
accordance with this EULA, including any additional EULA
terms accompanying the upgrade DEVICE Software.
•
COMPANION CD. If any Companion CD component(s) is
provided by Samsung Electronics Co., Ltd. separate from
the DEVICE on CD ROM disk(s) or via web download or
other means, and labeled “For Upgrade Purposes Only”,
you may (i) install and use one copy of such
component(s) on the computer(s) you use to exchange
data with the DEVICE as a replacement copy for the
existing Companion CD component(s).
178
Regulatory notices
COPYRIGHT
All title and intellectual property rights in and to the
SOFTWARE (including but not limited to any images,
photographs, animations, video, audio, music, text and
“applets,” incorporated into the SOFTWARE), the
accompanying printed materials, and any copies of the
SOFTWARE, are owned by MS or its suppliers (including
Microsoft Corporation). You may not copy the printed
materials accompanying the SOFTWARE. All title and
intellectual property rights in and to the content which may
be accessed through use of the SOFTWARE is the property
of the respective content owner and may be protected by
applicable copyright or other intellectual property laws and
treaties. This EULA grants you no rights to use such
content. All rights not specifically granted under this EULA
are reserved by MS and its suppliers (including Microsoft
Corporation).
EXPORT RESTRICTIONS
You acknowledge that SOFTWARE is subject to U.S. export
jurisdiction. You agree to comply with all applicable
international and national laws that apply to the
SOFTWARE, including the U.S. Export Administration
Regulations, as well as end-user, end-use and destination
restrictions issued by U.S. and other governments. For
additional information, see http://www.microsoft.com/
exporting/.
179
Regulatory notices
PRODUCT SUPPORT
Product support for the SOFTWARE is not provided by MS,
its parent corporation, Microsoft Corporation, or their
affiliates or subsidiaries. For product support, please refer
to Samsung Electronics Co., Ltd. support number provided
in the documentation for the DEVICE. Should you have any
questions concerning this EULA, or if you desire to contact
Samsung Electronics Co., Ltd. for any other reason, please
refer to the address provided in the documentation for the
DEVICE.
NO LIABILITY FOR CERTAIN DAMAGES
EXCEPT AS PROHIBITED BY LAW, MS SHALL HAVE NO
LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL
OR INCIDENTAL DAMAGES ARISING FROM OR IN
CONNECTION WITH THE USE OR PERFORMANCE OF THE
SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY
REMEDY FAILS OF ITS ESSENTIAL PURPOSE.
FOR APPLICABLE LIMITED WARRANTIES AND SPECIAL
PROVISIONS PERTAINING TO YOUR PARTICULAR
JURISDICTION, PLEASE REFER TO YOUR WARRANTY
BOOKLET INCLUDED WITH THIS PACKAGE OR PROVIDED
WITH THE SOFTWARE PRINTED MATERIALS.
180
Declaration of Conformity (R&TTE)
For the following product:
GSM900/GSM1800/GSM1900 with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-i320
(Model name)
Manufactured at:
- Samsung Electronics Co., Ltd, 94-1 Imsoo-Dong, Gumi City, Kyung Buk, Korea 730-350*
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
EMC
: EN 60950-1:2001
: EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
SAR
: EN 50360:2001
EN 50361:2001
Network
: EN 301 511 v9.0.2 (03-2003)
EN 300 328 v1.6.1 (11-2004)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
The conformity assessment procedure referred to in Article 10 and detailed in Annex[IV] of Directive 1999/5/
EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark: 168
The technical documentation kept at:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park, Saxony Way,
Yateley, Hampshire, GU46 6GG, UK
2006. 04. 28
Yong-Sang Park / S. Manager
(place and date of issue)
(name and signature of authorised person)
* It is not the address of the Samsung Service Centre. For the address or the phone number of Samsung Service Centre, see the
warranty card or contact the retailer where you purchased your phone.
* Depending on the software installed or your service provider or country,
some of the descriptions in this guide may not match your phone exactly.
World wide Web
http://www.samsungmobile.com
English. 02/2006. Rev. 1.0
|