Samsung SGH a117 User Manual

SGH-a117 Series  
P O R T A B L E D U A L - B A N D  
M O B I L E  
P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
A117_UCGE1_WB_052107_F5  
Table of Contents  
1
Table of Contents  
2
Section 1: Getting Started  
Topics Covered  
This section describes how to start using your phone by activating your service and  
setting up your voice mail.  
Activating Your Phone  
When you subscribe to a cellular network, a plug-in SIM card is provided loaded with  
your subscription details, such as your PIN and other optional services.  
Removing the Battery  
1. If necessary, power-off the phone by holding down the  
key until the  
power-off image displays.  
2. Remove the battery by pressing the battery lock down and slide the battery  
cover away, as shown.  
3. Lift the bottom of the battery and then lift it up and away.  
3
         
Activating Your Phone  
4. With the battery in position on the phone, place the cover back on the  
handset and slide it in until it clicks.  
Installing the SIM Card  
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use  
caution when inserting or removing the card and keep all SIM cards out of reach of children.  
Make sure the gold contacts of the card face into the phone, then slide the SIM card  
into the socket.  
Removing the SIM Card  
To remove the SIM card, slide it away from socket. See the following illustration.  
Installing the Battery  
1. Align the battery tabs with the slots at the bottom of the phone.  
2. Press the battery down until it clicks into place. Make sure that the battery  
is properly installed before switching on the phone.  
Getting Started  
4
     
3. With the battery in position on the phone, place the cover back on the  
handset and slide it in until it clicks.  
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to  
charge the battery, and use only Samsung approved batteries and chargers.  
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper  
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your  
warranty.  
1. Plug the connector of the travel adaptor into the jack on the side of the  
phone.  
2. Plug the adaptor into a standard AC wall outlet. When charging is finished,  
unplug the adaptor from the power outlet.  
5
   
Powering On or Off the Phone  
3. Remove the adaptor from the charger port.  
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid  
damage.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, a warning tone  
sounds and the “Battery Low” message repeats at regular intervals on the display.  
The backlight turns off to conserve the remaining battery power.  
When the battery level becomes too low, the phone automatically turns off.  
Powering On or Off the Phone  
1. Open the phone.  
2. Press and hold the  
3. If the phone asks you to enter a password, enter a password and press the  
key until the phone power-on screen displays.  
4. If the phone asks for a PIN, enter the PIN and press the OK soft key or the  
key.  
The phone searches for your network and after finding it, the Idle screen  
displays. Now, you can make or receive calls.  
Note: The display language is preset to Automatic at the factory. To change the language, use the  
5. When you wish to switch off the phone, press and hold the  
key until  
the power-off image displays.  
Getting Started  
6
     
Setting Up Your Voice Mail  
To access you voice mail from your keypad, use the following steps:  
1. Open the phone to access your keypad.  
2. From an Idle screen, press and hold the  
key.  
3. Follow the voice mail prompts to access messages.  
Accessing Your Voice Mail  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Recent Calls and press the  
key.  
key.  
3. Highlight Voice Mail and press the  
4. Highlight Connect to Voice Mail and press the Select soft key or the  
key.  
5. When connected, follow the voice prompts from the voice mail center.  
Changing the Voice Mail Number  
Your SIM card gives you default service number of the voice mail center. However,  
you may need to change the number. Use the following procedures to change your  
voice mail number.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Recent Calls and press Select soft key or the  
key.  
key.  
3. Highlight Voice Mail and press the Select soft key or the  
4. Highlight Voice Server Number and press the Select soft key or the  
key.  
5. Highlight Voicemail and press the Select soft key or the  
key.  
key to  
6. Edit Number is highlighted. Press the Select soft key or the  
modify the number.  
7. Enter your new Voice Server number and press the Save soft key to save.  
8. To edit the Voice Server Name, highlight Edit Name and press the Select  
soft key or the  
key to modify the name.  
9. Press the  
key to return to Idle mode.  
7
         
Features of Your Phone  
Section 2: Understanding Your Phone  
Topics Covered  
This section outlines some key features of your phone. It also displays the screen  
and the icons that are displayed when the phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many significant features. The  
following list outlines a few of the features included in your phone.  
User friendly, menu driven access to features and options.  
Text message capability  
Speakerphone capability  
Featured applications provide alarms, calculator, converter, and world time.  
Understanding Your Phone  
8
       
Open View of Your Phone  
The following illustrations show the main elements of your phone:  
Keys  
The following list correlates to the open and front view illustrations.  
1. Display: This screen displays all the information needed to operate your  
phone.  
2. Soft key: Performs the functions indicated by the screen text on the  
bottom of the display.  
3. Send key: Allows you to place or receive a call. In standby mode, press the  
key once to access the Recent Call log. If you press and hold the key down,  
you will initiate the most recent call from the Recent Call log.  
4. Volume/Menu Navigation key: Allows you to adjust the ringer volume in  
standby mode or adjust the voice volume during a call. The volume key can  
also be used to scroll up or down to navigate through the different menu  
options. To mute the ringer during an incoming call, press the volume key  
up or down. You can reject the call by pressing and holding the down key.  
9
   
Closed View of Your Phone  
5. Voicemail key: Press and hold the  
key to automatically dial your  
voicemail.  
6. Alphanumeric keypad: Use these keys to enter numbers, letters and  
characters.  
7. Microphone: The Microphone allows the other callers to hear you clearly  
when you are speaking to them.  
[ ]  
8. Special Function keys: Press the Asterisk/Shift key-enters the  
*
character for calling features. In text mode, press and hold to change the  
to symbol input type. [ ]  
Pound/Space/Quiet Mode key-enters the pound #  
character for calling features. In text entry mode, press to enter a space  
between characters. Press and hold to place handset in Quiet mode.  
9. Clear key: Deletes characters from the display when you are in text entry  
mode. When in a main menu, press to return to the previous menu.  
10. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a  
few seconds to power your phone On or Off. While in the main menu, it  
returns the phone to standby mode and cancels you input. When you  
receive an incoming call, press to reject call.  
11. Navigation keys: This key allows you to scroll through phone menu  
options and provides a shortcut to phone functions from standby mode.  
12. WAP Browser/Menu confirm key: When navigating through a menu  
accepts the highlighted choice in the menu. If you press once in Idle mode,  
the WAP browser will launch.  
13. Earpiece: Used to listen to audio from your phone.  
Closed View of Your Phone  
Understanding Your Phone 10  
   
Keys  
The following list correlates to the open and front view illustrations.  
1. Front LCD: Your phone has an external display on the front of the phone. It  
indicates when you have an incoming call or message. It also displays  
date, time, reception, battery power, and any icons associated with alerts,  
such as messages, or a set alarm.  
2. Power interface Connector/Headset jack: The power interface connector  
is used to plug in the charging accessories and the headset jack.  
Backlight  
A backlight illuminates the display and the keypad when you press any key or open  
the phone. It turns off when no keys are pressed within a given period of time, or  
dims the light, depending on the settings in the Backlight menu.  
Internal Display Layout  
The display has 3 areas:  
Icons  
Shows the received signal strength. The greater the number of  
bars, the stronger the signal.  
Appears when a new text message has been received.  
Appears when a new voice mail has been received.  
Appears when you set an alarm to ring at a specified time.  
Appears when you there is no network coverage available.  
Appears when a call is in progress.  
11  
   
Selecting Functions and Options  
Appears when you are connected to a WAP service.  
Appears when the Call Forwarding feature is active.  
Appears when incoming call Alert Type is set to Vibration.  
Appears when an incoming call Alert Type is set to Vibration  
then Melody.  
Appears when Quiet Mode, Vibration All is active.  
Appears when Quiet Mode, Silent All is active.  
Shows the level of your battery. The more bars you see, the  
more power you have remaining.  
Selecting Functions and Options  
Your phone offers a set of functions that can be customized for your ease and  
specific needs. These functions are arranged in menus and sub-menus, accessed  
using the two soft keys. Each menu and sub-menu allows you to view and alter the  
settings of a particular function.  
In some functions, you may be asked for a password or PIN. Enter the code and  
press the OK soft key or the  
key.  
When you access a list of options, your phone highlights the currently active option.  
If, however, there are only two options, such as On/Off or Enable/Disable, your  
phone highlights the option that is not currently active, so that you can select it  
directly.  
Selecting Options  
To view the various functions and options available and to select the one you want:  
Press the appropriate soft key.  
To select the function displayed or the option highlighted, press the Select soft key  
or the  
To view the next function or highlight the next option on a list, press the Down  
Navigation key or the key on the left side of the phone.  
To move back to the previous function or option on a list, press the Up Navigation  
key or the key on the left side of the phone.  
key.  
To move back up one level in the menu structure, press the Back soft key.  
Understanding Your Phone 12  
   
To exit the menu structure without changing the settings, press the  
key.  
Command Keys  
Functions for the soft keys are defined by what appears above each in the display.  
There are two soft keys, the left soft key  
and the right soft key  
.
Soft Keys  
The roles of the soft keys vary depending on the function you are currently using; the  
labels on the bottom line of the display just above each key indicate their current  
role.  
Left Soft Key  
Some functions of the left soft key are as follows.  
In the Idle screen, press the Menu (left) soft key  
to open the Menu screen.  
to open the Contacts Menu  
When in a menu mode the left soft key  
function is Select.  
Right Soft Key  
Some functions of the right soft key are as follows.  
In the Idle screen, press the Contacts soft key  
screen.  
When in a menu mode the right soft key  
function is Back.  
Clear Key  
The CLR key  
is used to erase or clear numbers, text, or symbols from the  
display. You can also use  
mode from any menu.  
to return to a previous menu or to return to standby  
If you enter an incorrect character, briefly press  
character.  
to backspace (and delete) the  
To erase the entire sentence, press and hold  
.
To back up one menu level, briefly press  
.
End Key  
The End key  
is used to turn on/off your phone, disconnect calls, and return to  
the standby mode.  
Press and hold the End key  
Briefly press once to disconnect a call.  
Press to return to standby mode from any menu, or to cancel the last input.  
to turn on your phone.  
13  
             
Command Keys  
Send Key  
The Send key  
is used to answer calls, dial calls, and to recall the last  
number(s) dialed, received, or missed.  
Press once to answer calls.  
Enter a number and briefly press  
to make a call.  
in standby mode to display a list of recent calls to and from your  
Briefly press  
phone.  
Press  
Press  
twice in standby mode to call the most recent number.  
to pick up a waiting call.  
Navigation Key  
Use the directional keys on the Navigation key to browse menus, sub menus, and  
lists. Press the up or down navigation when jumping to highlighted links on the web.  
Each key also acts as a shortcut to launch applications.  
Understanding Your Phone 14  
   
Section 3: Call Functions  
Topics Covered  
This section describes how to make or answer a call. It also includes the features  
and functionality associated with making or answering a call.  
Making a Call  
When the Idle screen displays, enter the area code and phone number, and press the  
key.  
Making an International Call  
1. Press and hold the  
key. The + character appears.  
2. Enter the country code, area code, and phone number. Press the  
key.  
Correcting a Dialed Number  
Use the following steps to correct a mis-typed entry prior to initiating the call.  
1. After dialing a number  
To clear the last digit displayed, press the  
key.  
To clear another digit in the number, press the Left or Right navigation key until  
the cursor is immediately to the right of the digit to be cleared. Press the  
key.  
To enter a missing digit press the Left or Right navigation key until the cursor is  
in position and enter the digit.  
To clear the whole display, press and hold the  
key.  
15  
           
Adjusting the Call Volume  
2. Press the  
key to return to the Idle screen.  
Ending a Call  
When you want to finish your call, briefly press the  
key.  
Redialing the Last Number  
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the  
number or caller is listed in your Address Book, the name associated displays.  
To access the Recent Calls menu:  
1. From the Idle Screen, press  
Menu. Use the Navigation keys to highlight  
Select.  
Recent Calls and press  
2. Use the Up and Down navigation keys to scroll through the Recent Calls  
options. Choose from Missed Calls, Calls Made, Calls Received, Voice  
Mail, Delete All, Call Time, Data Volume, Data Call Time.  
3. From the Idle Screen, press the  
key to display a list of the most recent  
numbers used in the order you dialed or received them.  
4. Use the Up and Down navigation keys to scroll through the numbers until  
the number you want highlights.  
5. To dial the number, highlight the number and press the  
key.  
Making a Call from the Address Book  
You can store phone numbers that you use regularly on the SIM card or in the  
phone’s memory. These entries are collectively called the Address Book.  
Once you have stored a number in the Address Book, you can dial it by pressing a  
few keys using the Speed Dial feature.  
For further details about the Address Book feature, see "Finding an Address Book  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece volume, use the Volume keys on the  
left side of the phone.  
Press the key to increase the volume level and the key to decrease the level.  
In Idle mode, you can also adjust the ringer volume using these keys.  
Call Functions 16  
         
Answering a Call  
When a call is received the phone rings and displays the caller’s phone number, or  
name if stored in the Address Book.  
1. From the Idle Screen press the  
key or the Accept soft key to answer  
the incoming call.  
If the Anykey Answer option in the Extra Settings menu is activated, you  
can press any key to answer a call except the  
key.  
key and the Reject soft  
If the Open to Answer option in the Extra Settings menu is activated, you  
can answer the call simply by opening the phone.  
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before  
opening the phone. A quick press of side volume key silences ringer on incoming call.  
2. End the call by closing the phone or by pressing the  
key.  
Note: You can answer a call while using the Address Book or menu features. After ending the call, the  
phone returns to the function screen you were using.  
Recent Calls  
The phone stores the numbers of the calls you’ve dialed, received, or missed in the  
Recent Calls menu. If the number or caller is listed in your Address Book, the name  
associated displays.  
Viewing Missed Calls  
The number of calls you have missed displays on the Idle screen when a call is  
missed. To view the number details, use the following steps:  
1. If the phone is closed, open the phone.  
2. Press the View soft key. The most recent missed call displays.  
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.  
3. To scroll through the missed calls, press the Up or Down navigation key.  
17  
         
Call Time  
Deleting a Missed Call  
To delete a missed call entry, use the following steps:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options soft key and highlight Delete. Press the Select soft key,  
or the key.  
3. At the “Sure to delete?” prompt, press the Yes soft key to confirm deletion  
or No to cancel.  
You can press the  
Call Time  
1. From the Idle Screen, press Menu. Use the Navigation keys to highlight  
Recent Calls and press Select soft key or the key.  
key at any time to exit the Missed Call feature.  
2. Highlight Call Time and press the Select soft key or the  
key.  
3. The following options that are available.  
• Last Call Time: shows the length of time for the last call.  
Total Sent: shows the total length of time for the calls made.  
Total Received: shows the total length of time for the calls received.  
4. Press the Reset soft key.  
5. At the “Are you sure?” prompt, press the OK soft key to confirm the reset  
or Back to cancel.  
6. Enter your password. At the “Confirm New Password”, re-enter the same  
password and press the OK soft key.  
Note: You are only required to set the password 1 time. After the initial setup, you can enter the password  
to reset the call times.  
7. Press the Back soft key or the  
Data Volume  
1. From the Idle Screen, press Menu. Use the Navigation keys to highlight  
Recent Calls and press Select soft key or the key.  
2. Highlight Data Volume and press the Select soft key or the  
key to end.  
key.  
3. Use the Up and Down navigation keys to view the following information:  
• Recent Volume: shows the Sent, Received, and Total data size used.  
Total Volume: shows the Sent, Received, and Total volume of data from the  
phone.  
4. Press the Back soft key or the  
key to end.  
Call Functions 18  
         
Data Call Time  
1. From the Idle Screen, press  
Recent Calls and press  
Menu. Use the Navigation keys to highlight  
Select soft key or the key.  
2. Highlight Data Call Time and press the Select soft key or the  
key.  
3. The following options are available:  
• Recent Time: shows the time used for the last data call sent or received.  
Total Time: shows the total time used to send or receive data.  
4. Press the Back soft key or the  
key to end.  
Quiet Mode  
Quiet mode is convenient when you wish to stop the phone from making noise, in a  
theater for example.  
In Idle mode, press and hold the  
key until the “Silent Mode Activated” message  
and the Quiet Mode icon displays.  
In Quiet mode, your phone will vibrate and light up the external LCD display or just  
light the external LCD display depending on the setting in the Silent All feature.  
To exit and reactivate the previous sound settings, press and hold the  
key again  
until “Silent Mode Deactivated” displays. The  
displays.  
Quiet Mode icon no longer  
Note: Setting for Quiet Mode can be set to Silent All.  
Options During a Call  
Your phone provides a number of control functions that you can use during a call.  
Speakerphone Key  
During a call, use the speakerphone key  
in conjunction with the left soft key  
to activate the speakerphone operation. Use the volume keys (located on the left side  
of your phone) to adjust the volume.  
Putting a Call on Hold  
You can place the current call on hold whenever you want. You can also make  
another call while you have a call in progress if your network supports this service.  
To put a call on hold:  
1. While on a call, press the left soft key Options. Highlight Hold and press  
the Select soft key. The call is on hold.  
19  
               
Options During a Call  
2. You can reactivate the call whenever you want, by pressing the Resume  
soft key.  
To make a call while you have a call in progress:  
1. Place the call on hold using the previous procedures, and enter the phone  
number that you wish to dial or look it up in the Address Book.  
2. Press the  
key to dial the second call.  
When you have an active call and a call on hold, you may switch between the two  
calls, changing the one on hold to active and placing the other on hold. To switch  
between the two calls, simply press the Swap soft key. The current call is placed on  
hold and the call on hold is reactivated so that you can continue conversing with that  
person.  
In Call Options  
During a call, press the Options soft key to access the following:  
Loud Spkr On/Off: Allows you to enable the speakerphone option.  
Hold: Places the call on hold.  
New Call: places the current call on hold and allows you to enter and dial another  
number.  
Address Book: access the Address Book information.  
Text Message: allows you to send a message from your Inbox, Outbox, or to  
create a new text message.  
Whisper On/Off: allows you to enable or disable the whisper option.  
Mute/Send Keys: silences the key tones when on the call.  
Send DTMF: sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you  
have selected.  
If you have are in a multi-party call, the following options also display.  
Join: joins the calls you have established with your phone.  
Split: when a multiparty call is in progress, the split option will eliminate the two  
calls into their original calls.  
End Held Call: ends the call that is placed on hold.  
When you want to finish, end each call normally by pressing the  
key.  
Call Functions 20  
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off, so that the other person  
cannot hear you.  
Example: You wish to say something to person in the room, but do not want the person on the phone to hear  
you.  
During a call, to switch the microphone off temporarily:  
1. Press the  
Mute. Unmute displays.  
2. Press the  
Unmute to deactivate the Mute function.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If the Mute Keys option is  
selected, your phone does not transmit the DTMF (Dual Tone Multi-Frequency) tones  
of the keys, which allows you to press keys without hearing annoying key tones  
during a call.  
Note: To communicate with answering machines or computerized telephone systems, the Send Keys option  
must be selected.  
Searching for a Number in Address Book  
You can search for a number in Address Book during a call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the Address Book option.  
3. Press the Select soft key or the  
key.  
4. Contact List is highlighted. Press the Select soft key or the  
key.  
5. Enter the first few letters of the name to display entries listed starting with  
the first entry matching your input.  
6. Use the Navigation keys to select an entry.  
7. To view the highlighted entry, press the  
View soft key.  
For further details about the Address Book feature, see "Finding an Address Book  
21  
   
Options During a Call  
Call Waiting  
The Call Waiting feature allows you to answer an incoming call while you have a call  
in progress, if this service is supported by the network, and you have set the Call  
Waiting-Voice Calls Menu to Activate. You are notified of an incoming call by a call  
waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
first call is automatically put on hold.  
2. To switch between the two calls, press the Swap soft key.  
To end a call on hold, press the Options soft key or the key and select the End  
Held Call option. Press the key.  
To end the current call, press the  
key or the Accept soft key to answer the incoming call. The  
key.  
Call Functions 22  
 
Section 4: Menu Navigation  
Topics Covered  
This section explains the menu navigation for your phone. It also includes an outline  
of all the available menus associated with your phone.  
Menu Navigation  
Menus and sub-menus can be accessed by scrolling using the Navigation keys or by  
using the shortcut keys.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Scroll using the Navigation keys to reach a main menu Settings for  
example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Set Phone for example, you can access  
them by highlight the option and by pressing the Select soft key or the  
key. If the menu that you have selected contains further options, repeat  
this step.  
4. To scroll through the menus, press the Up or Down navigation key or the  
Volume key (located on the left side of your phone). Press the Select soft  
key, or the  
5. To return to the previous menu level, press the Back soft key, the  
6. To exit the menu without changing the settings, press the key.  
key to make your selection.  
key.  
23  
       
Menu Outline  
Using Shortcuts  
Numbered menu items, such as menus, sub-menus, and options can be quickly  
accessed by using their shortcut numbers. In Menu mode, Main Menus can be  
accessed by pressing the number keys (1 to 9) corresponding to their location on the  
screen.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press the  
3. Press the  
4. Press the  
key for Settings.  
key for Set Phone.  
key for Language.  
The available languages are displayed.  
Menu Outline  
The following list shows the menu structure and indicates the number assigned to  
each option.  
1: Alarms  
2: Messaging  
1: Text Message  
1: Create New Message  
2: Inbox  
3: Outbox  
4: Delete All  
2: Browser Messages  
1: Inbox  
2: Setting  
3: Delete All  
3: Templates  
4: Settings  
5: Broadcast Messages*  
6: Memory Status  
3: Recent Calls  
1: Missed Calls  
2: Calls Made  
3: Calls Received  
4: Voice Mail  
1: Connect to Voice Mail  
Menu Navigation 24  
     
2: Voice Server Number  
1: Voicemail  
2: Voice Server 2  
5: Delete All  
6: Call Time  
7: Data Volume  
1: Recent Volume  
2: Total Volume  
8: Data Call Time  
4: MEdia Net  
1: MEdia Net Home  
2: Favorites  
3: Go to URL  
4: Browser Profiles  
5: Clear Cache  
5: AT&T Mall  
1: Shop Tones  
2: Shop Graphics  
3: Shop Multimedia  
4: MEdia Net Home  
6: Applications  
1: Calculator  
2: Converter  
1: Length  
2: Weight  
3: Volume  
4: Area  
5: Temperature  
3: World Time  
7: My Stuff  
1: Audio  
1: Shop Tones  
2: Downloaded Ringtones  
3: Default Ringtones  
2: Graphics  
1: Shop Graphics  
2: Downloaded Graphics  
3: Default Wallpapers  
25  
Menu Outline  
3: Delete All  
4: Memory Status  
8: Address Book  
1: Contact List  
2: Add New Contact  
1: Phone  
2: SIM  
3: SIM (FDN)  
3: Speed Dial  
4: Own Number  
1: Voice Line 1  
2: Voice Line 2  
3: Data  
4: FAX  
5: FDN List  
6: Management  
1: Copy All to Phone  
2: Delete All  
3: Memory Status  
9: Settings  
1: Set Sound  
1: Incoming Calls  
2: Keypad Tone  
3: Power On/Off  
4: Quiet Mode  
5: Extra Tone  
2: Set Display  
1: Wallpaper  
2: Brightness  
3: LCD Contrast  
4: Backlight  
5: Dialing Display  
6: Show Caller Information  
3: Time & Date  
1: Set Time  
2: Set Date  
3: Set Format  
4: Auto Update  
Menu Navigation 26  
4: Set Phone  
1: Language  
2: Greeting Message  
3: Extra Settings  
5: Network Services  
1: Call Forwarding  
2: Call Barring  
3: Call Waiting  
4: Network Selection  
5: Caller ID  
6: Security  
1: PIN Check  
2: Change PIN  
3: Phone Lock  
4: Change Password  
5: Lock Applications  
6: SIM Lock  
7: FDN Mode  
8: Change PIN2  
7: Reset Settings  
* Shows only if supported by your SIM card.  
27  
Changing the Text Input Mode  
Section 5: Entering Text  
Topics Covered  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use the T9 predictive  
text entry system to reduce the amount of key strokes associated with entering text.  
Changing the Text Input Mode  
The Text Input option switches the key entry functions from T9 Mode, ABC Mode,  
Numeric Mode, and Symbols Mode.  
T9 Mode  
This mode allows you to enter words with only one keystroke per letter.  
Each key on the keypad has more than one letter; for example, pressing  
the 5 key can enter J, K, or L. However, the T9 mode automatically  
compares the series of keystrokes you make with an internal linguistic  
dictionary to determine the most likely word, thus requiring far fewer  
keystrokes than the traditional Alphabet mode.  
ABC Mode  
This mode allows you to enter letters by pressing the key labeled with the  
letter you want. Press the key once, twice, three, or four times until it  
displays.  
Numeric Mode  
This mode allows you to enter numbers.  
Symbols Mode  
This mode allows you to enter symbols, such as punctuation marks.  
Entering Text 28  
                 
When you are in a field that allows characters to be entered, you will notice the text  
input mode indicator on the display.  
1. To change the text input mode, press the  
2. Choose from the following options:  
: ABC mode (short press the  
key.  
key to change the text case  
between the ABC, Abc, and abc mode)  
: Numeric mode (press and hold the  
mode.)  
key to change to number  
: T9 mode (press the  
key to change to the case for T9 mode)  
Note: Press and hold the  
key to access the Symbol mode. Press the number key corresponding to the  
symbol you want to enter. Use the Up and Down navigation keys to scroll through the available  
symbols. Press the Back soft key to exit.  
Using T9 Mode  
T9 Predictive Text input mode is based on a built-in dictionary.  
Enter a Word in T9 Mode  
1. In T9 mode, begin entering a word by pressing the 2 to 9 keys. Press each  
key only once for each letter. The built-in dictionary lists words that match  
the keystrokes you have entered.  
Example: To enter “Hello”, press  
,
,
,
,
The word that you are typing appears in the display. It may change with  
each key that you press.  
2. Enter the whole word before editing or deleting the keystrokes.  
3. When the word displays correctly, continue to step 4.  
29  
     
Using Alphabet Mode  
If the word doesn’t display correctly, press the  
key to display  
alternative word choices for the keys that you have pressed.  
Example: Both “Of” and “Me” have the  
choice first.  
and  
keys. The phone displays the most commonly used  
4. Insert a space by pressing the  
key and start entering the next word.  
Add a New Word into the T9 Dictionary  
1. After pressing the keys corresponding to the word you want to add, press  
the  
2. When the last alternative word is displayed, Spell displays. Press the Spell  
soft key or the key.  
3. Enter the word you want to add using ABC mode.  
4. Press the OK soft key or the key.  
key to display the alternative words.  
The word is added to the T9 dictionary and becomes the first word for the  
associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, colons, or parenthesis, press the  
key. T9 mode  
applies grammar rules to ensure that correct punctuation is used.  
To shift case in T9 mode, use the  
Capital lock, and Lower case.  
key. There are 3 cases: Initial capital,  
You can move the cursor by using the Left and Right keys. To delete letters, press  
the key. Press and hold the key to clear the display.  
Using Alphabet Mode  
To use the Alphabet Mode use the  
to  
keys to enter your text.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or  
a different letter on the same key, just wait for a few seconds for the cursor to move to the right  
automatically, and then select the next letter.  
Entering Text 30  
   
Keys  
Entering Symbols  
Symbol mode enables you to insert symbols and punctuation marks into text.  
1. To enter symbol mode press and hold the  
key.  
2. To select a symbol, press the corresponding number key.  
3. To display more symbols, press the Up or Down navigation key.  
4. To clear the symbol(s), press the  
key. When the input field is empty,  
this key returns the display to the previous mode.  
5. To insert the symbol(s) into your message, press the OK soft key or the  
key.  
Using Numbers  
Number mode enables you to enter numbers into a text message. Press the keys  
corresponding to the digits you want to enter.  
31  
       
Using Contacts List  
Section 6: Understanding Your Address Book  
Topics Covered  
This section allows you to manage your daily contacts by storing their name and  
number in your Address Book. Address Book entries can be sorted by name, or entry.  
Using Contacts List  
Dialing a Number from Address Book  
Once you have stored phone numbers in the Address book, you can dial them easily  
and quickly by using the location numbers that were assigned to them in the  
Address Book.  
Finding an Address Book Entry  
You can store phone numbers and their corresponding names in your SIM card and  
phone’s memories. They are physically separate but are used as a single entity,  
called Address Book.  
Depending on your particular SIM card, the maximum number of phone numbers the  
SIM card can store may differ.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, and press the Select soft key or the  
3. Highlight Contact List and press the Select soft key or the  
4. Enter the first few letters of the name.  
key.  
key.  
The Address Book entries are then listed, starting with the first entry  
matching your input.  
5. To select a different entry, press the Up or Down navigation key until the  
entry you want is highlighted.  
Understanding Your Address Book 32  
           
6. Once you have found the entry, press the  
key to dial the number, or  
press the Options soft key to access the Address Book entry options.  
Using Address Book Entry Options  
While accessing any Address Book entry, press the View soft key and the Options  
for the entry.  
The following options are available:  
Edit Number: allows you to edit the Number. Press the  
Edit Name: allows you to edit the Name. Press the  
key to save.  
key to save.  
Send Message: allows you to send a text message to this contact.  
Assign Speed Dial: allows you to set the speed dial key for this entry.  
Copy to SIM/Phone: allows you to copy the contact information to the SIM card or  
the Phone (depending on the initial storage location).  
Copy to SIM (FDN): allows you to copy the contact information from the SIM (FDN)  
list.  
Delete Entry: allows you to delete the selected address book entry.  
Adding a New Contact  
Use the following steps to add a new Contact  
Storing a Number in the Phone’s Memory  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Add New Contact by pressing the Up or Down navigation key  
and press the Select soft key or the key.  
4. Highlight Phone and press the Select soft key or the  
5. Select a phone category from the Type screen and press the Select soft  
key or the key. The following category types are available for input:  
key.  
key.  
• Mobile: assigns the number entered to the Mobile entry.  
• Home: assigns the number entered to the Home entry.  
• Other: assigns another phone number for the contact entry.  
• E-Mail: allows you to enter an e-mail address for the contact.  
6. Enter the contact Number and press the Save soft key or the  
key.  
Tip: To change text entry mode press the  
key. For further details about how to enter characters, see  
7. Enter the contact Name and press the OK soft key or the  
key.  
33  
     
Adding a New Contact  
8. The View screen appears in the display. Use the Left and Right navigation  
keys to choose one of the following options:  
Mobile: allows you assign a cellular phone number for this contact.  
Home: allows you assign a home phone number for this contact.  
Other: allows you enter other information associated with this contact.  
E-Mail: allows you to assign the e-mail information to this contact.  
Alert: allows you to choose a ringtone for this contact information.  
9. Press the Options soft key to display the following options:  
• Edit Number: allows you to edit the number assigned to this contact.  
• Edit Name: allows you to edit the name assigned to this contact.  
• Send Message: allows you to send a text message to this contact.  
• Assign Speed Dial: allows you to set the speed dial key for this entry.  
Copy to SIM: allows you to copy the contact information from the SIM card.  
Copy to SIM (FDN): allows you to copy the contact information from the SIM  
(FDN) list.  
• Delete Entry: allows you to delete the selected address book entry.  
10. To return to the Idle screen, press the  
key.  
Storing a Number in the SIM Card  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Scroll to Add New Contact by pressing the Up or Down navigation key  
and press the Select soft key or the key.  
4. Highlight SIM and press the Select soft key or the  
key.  
5. Enter the following information for the New Contact.  
• Number: assigns the number entered to the Mobile entry.  
• Name: allows you to enter a name for the number entered.  
Note: To change text entry mode press the  
key. For further details about how to enter characters, see  
• Location: allows you to assign a location number on your SIM for the number  
being entered.  
Memory Status: shows the number assigned to the SIM memory card.  
6. Press the Save soft key or the  
key to save each entry.  
7. Press the Options soft key to display the following options:  
• Edit Number: allows you to edit the number assigned to this contact.  
• Edit Name: allows you to edit the name assigned to this contact.  
• Send Message: allows you to send a text message to this contact.  
Understanding Your Address Book 34  
 
• Assign Speed Dial: allows you to set the speed dial key for this entry.  
Copy to Phone: allows you to copy the contact information from the Phone.  
Copy to SIM (FDN): allows you to copy the contact information from the  
SIM (FDN) list.  
• Delete Entry: allows you to delete the selected address book entry.  
8. To return to the Idle screen, press the  
key.  
Dialing a Number from the SIM Card  
1. In Idle mode, enter the SIM location number assigned to the phone number  
you want to dial and press the key.  
The contact entry information is displayed.  
2. Press the Up or Down navigation key to find other numbers on the list.  
3. Press either the Dial soft key or the  
key to initiate the call.  
Speed Dial  
Once you have stored phone numbers from your Address book list, you can set up to  
8-speed dial entries and then dial them easily whenever you want, simply by  
pressing the associated numeric key.  
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the  
appropriate key.  
Setting Up Speed Dial Entries  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Contact List by pressing the Up or Down navigation key, press  
the Select soft key or the key.  
4. Select an available entry and press the View soft key or the  
5. Press the Options soft key and scroll to Assign Speed Dial by pressing the  
Up or Down navigation key, then press the Select soft key or the key.  
6. Highlight the key into which you wish to assign the speed-dialing number  
key.  
key.  
(from the 2 to 9 keys), and press the Select soft key or the  
key.  
Note: Memory location 1 is reserved for your Voice mail server number.  
7. At the “Save?” prompt, press the Yes soft key to confirm the assignment  
or No to cancel.  
35  
     
Finding My Own Phone Number  
Changing a Number Assigned to a Key  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Scroll to Speed Dial by pressing the Up or Down navigation key, press the  
Select soft key or the key.  
4. Highlight the entry you wish to change and press the Select soft key.  
5. To edit an assigned speed dial number, press the Select soft key.  
• Edit number: allows you to edit the number assigned to this contact.  
• Edit name: allows you to edit the name assigned to this contact.  
• Delete: allows you to delete the selected address book entry.  
6. Enter the change and press the Save soft key.  
7. When you are finished, press the  
key to return to Idle mode.  
Deleting Speed Dial Entries  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Scroll to Speed Dial by pressing the Up or Down navigation key, press the  
Select soft key or the key.  
4. Select the number assigned to the key you want to remove and highlight  
Delete. Press the Select soft key. A “Sure to Delete?” prompt displays.  
Press Yes to continue or No to cancel.  
5. When you are finished, press the  
key to return to Idle mode.  
Finding My Own Phone Number  
This function is a memory aid, which you can use to check your own phone number  
if you need to do so.  
You can assign a name to each of your own phone numbers registered on your SIM  
card. You can also edit the names and numbers. Any changes made here do not in  
any way affect the actual subscriber numbers on your SIM card.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Own Number by pressing the Up or Down navigation key and  
press the Select soft key or the key.  
key.  
4. Highlight Own Number, your mobile number displays in a pop up.  
5. Enter additional numbers in the 2, 3, and 4 fields.  
Understanding Your Address Book 36  
   
6. Press the  
FDN List  
key to Save.  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
your outgoing calls to a limited set of phone numbers.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in SIM card.  
You must enter your PIN2. You can obtain your PIN2 from your service provider.  
Management  
The Management option allows you to copy, delete, and view the memory status for  
the Phone and SIM entries on your phone.  
Copy All to Phone  
You can copy all entries from the SIM card to the Phone using the Copy All to Phone  
option.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Management by pressing the Up or Down navigation key and  
press the Select soft key or the key.  
4. Scroll to Copy All to Phone by pressing the Up or Down navigation key  
and press the Select soft key or the key.  
5. When the “Sure to Copy All?” confirmation screen appears, press the Yes  
key.  
soft key or the  
cancel deletion.  
key to confirm deletion or press the No soft key to  
Delete All  
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Management by pressing the Up or Down navigation key and  
press the Select soft key or the key.  
4. Highlight Delete All and press the Select soft key or the  
5. Select a memory location by first highlighting the location you want to  
empty and press the Select soft key or the key to place a check mark.  
key.  
key.  
37  
         
Management  
You can remove the check mark by pressing the Select soft key or the  
key.  
6. Press the Delete soft key to delete the selected entries for the memory  
location.  
7. At the “Delete All?” confirmation screen, press the Yes soft key to  
continue, or the No soft key to cancel. When deleting either a Phone or SIM  
entry, you are first asked for password information before completing the  
deletion process.  
8. At the “Enter Password” screen, enter your password and press the OK  
soft key to continue.  
9. If you’ve chosen to delete SIM(FDN) information, enter the PIN2 password  
and press the OK soft key or the  
key.  
10. When you are finished, press the  
key to return to Idle mode.  
Note: Pin2 is assigned by the carrier at time of activation.  
Memory Status  
You can check how many names and numbers are stored in the Address book, in  
both SIM card, the phone memory, and SIM (FDN). You can also see the capacity of  
both memories.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Scroll to Management by pressing the Up or Down navigation key and  
press the Select soft key or the key.  
4. Scroll to Memory Status by pressing the Up or Down navigation key and  
press the Select soft key or the key.  
key.  
5. When you are finished viewing your phone’s Memory Status, press the  
key to return to Idle mode.  
Understanding Your Address Book 38  
 
Section 7: Messaging  
Topics Covered  
This section describes how to send or receive different types of messages. It also  
includes the features and functionality associated with messaging.  
Creating and Sending New Messages  
Short Message Service (SMS) allows you to send and receive short text messages to  
and from other mobile phones. In addition, your phone supports the Enhanced  
Messaging Service (EMS), which enables you to include simple pictures, melodies,  
and animated images in your messages. To use this feature, you must subscribe to  
your service provider’s message service.  
The Message icon ( ) displays when you have received new text messages. When  
the memory is full, an error message displays and you cannot receive any new  
messages. Use the Delete option in each message box to delete obsolete messages.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Messaging and press the Select soft key or the  
key.  
key.  
3. Highlight Text Message and press the Select soft key or the  
4. Highlight Create New Message and press the Select soft key or  
the key. For more information on entering text into your new message,  
5. When you have finished writing your message, press the Options soft key.  
Choose from the following options:  
• Send: allows you to send the message to the contact.  
Text Formatting: allows you to set the Text Size, Text Mode, Bold, Italic, and  
Alignment for the text entered.  
39  
     
Retrieving New Messages  
• Add Media: allows you to add pictures, animation, or melody to your message.  
-
-
Add Picture: allows you to add a picture to your message.  
Add Animation: allows you to add an animation to your message. Select  
between Preset Animation or My Animations.  
-
Add Melody: allows you to add a melody to your message. Select between  
Preset Melodies and My Melodies.  
Templates: allows you to select from the 10 preset text message templates.  
• Add from Favorites: choose from the favorite sites you have stored on your  
phone.  
• Save Message: allows you to save the text message to your Phone or to your  
SIM card.  
• Select Language: allows you to set the language to English, Français, or  
Español.  
6. Highlight Send and press the Select soft key or the  
key. Press the  
Select soft key to choose from the Address Book, Number, or E-mail.  
7. Highlight the entry and press the Select soft key.  
8. Press the Send soft key to send the message.  
Retrieving New Messages  
Text messages from other phones are delivered directly to your phone. Use the  
following steps to retrieve them.  
Viewing a Message  
1. In Idle mode, press the Menu soft key and highlight Messaging. Press the  
Select soft key or the  
key.  
2. Highlight the Text Message folder and press the Select soft key or the  
key.  
3. Highlight Inbox and press the Select soft key or the  
list opens. The icons on the left of the number indicates the message type.  
: indicates SMS  
key. The message  
4. Select a message on the list. The message content displays.  
5. Press the Up or Down navigation key to scroll through the message  
screen.  
6. When you have finished, press the  
key.  
Messaging 40  
 
Using Message Options  
While viewing the contents of the Inbox, press the Options soft key to access the  
following options:  
Options for the Inbox  
View: allows you to view the message.  
Reply: allows you to reply to the message.  
Call Back: allows you to call back the originator of the message.  
Forward: allows you to forward the message.  
Delete: deletes the message.  
Delete All: deletes all the messages in the message folders.  
While viewing the content of a single message, press the Options soft key to access  
the following options:  
Options for a Text Message  
Reply: allows you to reply to the message.  
Call Back: allows you to call back the originator of the message.  
Forward: allows you to forward the message.  
Delete: deletes the message.  
Move to SIM/Phone: depending in where the message is currently stored, this  
function moves the message to either the SIM card or to the phone.  
Extract Address: extracts information from the text message such as: phone  
number, email address, or URL and then provides that information in a listing.  
Deleting Messages  
You can delete the messages in each message folder(s) individually or all at one  
time. You can also delete all of your messages at one time.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Messaging and press the Select soft key or the  
key.  
3. Highlight Text Message and press the Select soft key.  
4. Using the Up or Down navigation key highlight Delete All and press the  
Select soft key or the key.  
5. Select the message folders you want to empty by using the Navigation  
keys to highlight the folder and press the Select soft key or the  
mark the folder for deletion.  
key to  
To delete all of the messages in all folders, select All Messages.  
6. Press the Delete soft key.  
41  
 
Using Message Templates  
7. At the “Delete All?” confirmation screen, press the Yes soft key or the  
key to confirm deletion or press the No soft key to cancel deletion.  
8. When you have finished, press the  
key.  
Using Message Templates  
Your phone has message templates to allow you to retrieve them when creating a  
message. You can change the templates as your preferences or send a message  
immediately.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Messaging and press the Select soft key or the  
key.  
key.  
Highlight Templates and press the Select soft key or the  
3. Highlight a template and press the Select soft key to access the following  
options:  
• Edit: allows you to change the template.  
• Send Message: allows you to send a Text message using the template.  
• Delete: deletes the selected template.  
4. When you have finished, press the  
key.  
Settings  
You can set up various options for using messaging services.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select Messaging and highlight Settings.  
3. Press the Select soft key or the  
key.  
• Send Settings: allows you to set the options for sending text messages.  
Choose from the following options: Reply path or Delivery Report.  
• Text Message Profile: allows you to set the options for sending text  
messages. Choose from the following options:  
-
Current Profile: allows you to select an option for sending a text message.  
Choose from the following options: SMS Settings, Email Settings, and  
Profile 3.  
-
Profile Settings: allows you to configure a profile setting. Choose from the  
following options: SMS Settings, Email Settings, and Profile 3.  
Messaging 42  
   
Memory Status  
You can check the amount of the memory being used and the memory remaining for  
Phone and the SIM card.  
The display shows the total space including the used and free space. You can also  
view how much space is currently occupied by each message box.  
43  
 
Set Sound  
Section 8: Changing Your Settings  
Topics Covered  
This section explains the sound and phone settings for your phone. It includes  
display settings, security settings, and extra settings associated with your phone.  
Set Sound  
You can customize various sound settings.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Settings and press the Select soft key or the  
key.  
3. Highlight Set Sound and press the Select soft key or the  
key. The  
following options are available. Use the Up or Down navigation key to  
scroll to and set options:  
Incoming Calls  
This menu allows you to make a selection from the following categories:  
Shop Tones: allows you to access the internet to shop for a new ringtone.  
Default Ringtones: allows you to set the ringtone from the default ringtones.  
Downloaded Ringtones: allows you to select from the downloaded ringtones.  
Ring Volume: allows you to set the volume for your ringer to sound when receiving  
an incoming call.  
Alert Type: allows you to set the alert default. Choose from Melody, Vibration, or  
Vibration Then Melody.  
Press the Up or Down navigation key to make selection. Press the Select  
soft key or the key to save changes.  
Changing Your Settings 44  
         
Keypad Tone  
This menu allows you to select the tone and volume when you press the keypad.  
1. Use the Navigation keys to select a Default Keypad Tone (Off, Xylophone,  
or DTMF).  
2. Use the Left or Right navigation keys to increase or decrease the Volume.  
Power On/Off Tone  
This menu allows you to enable/disable the melody that the phone sounds when it is  
switched on and off.  
1. Press the Up or Down navigation key to make selection. Press the Select  
soft key or the  
2. To turn off the sound, select Off.  
Quiet Mode  
This menu item allows you to select what mode your phone will go in when you  
press and hold the key. You can choose Vibration All or Silent All.  
key to save changes.  
When Vibration All is selected your phone will only vibrate.  
When Silent All is selected your phone will not make a sound or vibrate.  
1. Press the Up or Down navigation key to make selection.  
2. Press the Select soft key or the  
Extra Tone  
key to save changes.  
Allows you to set the tones for the Minute Minder, Connect Tone, Alerts on Call,  
and Indicative Tones.  
Set Display  
In this menu, you can change various settings for the display or backlight.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Settings and press the Select soft key or the  
key.  
key.  
3. Highlight Set Display and press the Select soft key or the  
The following options are available. Use the Up or Down navigation key to  
scroll to and set options:  
45  
     
Set Display  
Wallpaper  
Allows you to select from the preloaded wallpapers. User the Left or Right  
navigation keys to view all wallpaper. Press the Select soft key or the  
key to  
make your selection. You can choose from Shop Graphics, Default wallpapers,  
Downloaded graphics, Text position and Text Color.  
Shop Graphics: allows you to access the internet to shop for a new graphics.  
Default Wallpapers: allows you to select from the default wallpapers.  
Downloaded Graphics: allows you to select from the downloaded graphics.  
Text position: allows you to select the position of the text displayed in Idle mode.  
Press the Up or Down navigation keys to make your selection. Choose from  
Top, Bottom, or Off.  
Press the Select soft key or the  
key to make your selection.  
Text Color: allows you to select the color of the text to be displayed on the Idle  
screen.  
Press the Up or Down navigation keys to make your selection.  
Press the Select soft key or the  
key to make your selection.  
Brightness  
Allows you to adjust the brightness of the display for your screen. Use the Left or  
Right navigation keys to increase or decrease the brightness.  
LCD Contrast  
Allows you to adjust the contrast for the External LCD or the Main LCD screen. Use  
the Left or Right navigation keys to adjust the contrast.  
Main LCD: allows you to adjust the contrast settings for the Main LCD.  
External LCD: allows you to adjust the contrast settings for the external LCD.  
Backlight  
Allows you to set the time for the backlight to be displayed before it turns remains of  
or dims.  
On: Choose from 15 Seconds, 30 Seconds, 1 minute, 3 minutes or 10 minutes.  
Dim: Choose from Off, 15 Seconds, 30 Seconds, 1 minute, or 3 minutes.  
Dialing Display  
Allows you to choose the dialing display for your phone. Choose between either  
Black or Rainbow.  
Highlight the selection and press the Select soft key.  
Changing Your Settings 46  
Show Caller Information  
Allows you to enable (On) or disable (Off) the your Caller Information when you  
receive a phone call.  
Time & Date  
This menu allows you to change the current time and date displayed. You can also  
find out what time it is in another part of the world.  
Note: Before setting the time, you must specify your time zone in the World time menu. For more  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Settings and press the Select soft key or the  
key.  
3. Highlight Time & Date and press the Select soft key or the  
key.  
The following options are available. Use the Up or Down navigation key to  
scroll to and set options:  
Set Time: allows you to enter the current time using your keypad. Press the Set  
soft key to save. Use the Up or Down navigation key to select AM or PM. Press  
the Select soft key or the  
key to save selection.  
Set Date: allows you to enter the current date using your keypad. Press the Set  
soft key to save.  
Set Format: allows you to change either the time or date format.  
-
The time format can be set to either 12 hours or 24 hours. Use the Up or Down  
navigation key to select Time Format. Press the Select soft key to save.  
The date format can be set to either MM/DD/YYY or YYYY/MM/DD. Use the  
Up or Down navigation key to select Time Format. Press the Select soft key to  
save.  
-
Auto Update: time changes to the time set on your carriers server.  
4. Press the Select soft key or the to save your Time & Date settings.  
Note: Automatic updates of time and date does not change the time you have set for alarm settings.  
Set Phone  
To customize the settings of your phone use the following steps:  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Settings and press the Select soft key or the  
3. Using the Up or Down navigation key highlight Set Phone and press the  
Select soft key or the key. The following options are available:  
key.  
47  
   
Set Phone  
Language  
You can select a display language. You can set the Text Language or the Input  
Mode. When the language option is set to Automatic, the language is automatically  
selected according to the language of the SIM card used.  
The Input Mode sets the language used when entering text into the phone.  
Depending on your country, service provider, or the software version of the phone,  
the Automatic option may not display.  
Press the Select soft key or the  
key to save selection.  
Greeting Message  
This menu allows you to set a greeting to be displayed briefly when the phone is  
switched on.  
Extra Settings  
You can turn the automatic redialing or answering features on or off.  
1. To turn a feature on, press the  
key. A check mark displays in front of  
the option.  
2. To turn a feature off, press the  
key. The check mark no longer displays.  
3. Press the Back soft key to save changes.  
The following options are available:  
Note: The interval between call attempts varies.  
Auto Redial: when this option is checked, the phone makes up to ten attempts to  
redial a phone number after an unsuccessful call.  
Anykey Answer: when this option is checked, you can answer an incoming call by  
pressing any key, except the  
key or the Reject soft key. To reject the call, press  
the  
the  
key or the Reject soft key. When this option is unchecked, you must press  
key or Accept soft key to answer a call.  
Open to Answer: when this option is checked, you can simply open the phone to  
answer a call. When it is unchecked, you must open the phone and press a key to  
answer a call, depending on the setting of the Anykey Answer option.  
Changing Your Settings 48  
   
Network Services  
Allows you to set the settings for the provided services on your phone.  
Call Forwarding  
Example: You may wish to forward your business calls to a colleague while you are on holiday.  
To set your call forwarding options:  
1. From the Network Services menu, select Call Forwarding.  
2. Select a call forwarding option by pressing the Up or Down key and then  
press the Select soft key or the  
key. The following options are  
available:  
• Forward Always: allows you to always forward Voice Calls and Data Calls.  
-
Press the Select soft key, press Activate, and then enter the forwarding  
number.  
-
To deactivate, follow the same steps and press the Remove soft key.  
• Busy: allows you to forward Voice Calls and Data Calls to the designated  
number instead of your voice mail number if you are on another phone call.  
• No Reply: allows you to forward Voice Calls and Data Calls to the designated  
number instead of your voicemail number when there is no answer on your  
phone. You can choose the time setting from 5, 10, 15, 20, 25, and 30  
seconds).  
• Unreachable: calls are forwarded when you are not in an area covered by your  
service provider or when your phone is switched off.  
• Cancel All: all call forwarding options are canceled.  
3. Select the call type, Voice Calls or Data Calls, by pressing the Up or  
Down key, and then press the Select soft key or the  
key.  
4. Press the Left soft key to Activate or Right soft key Remove to turn off  
call forwarding.  
5. Scroll to Forward To, enter or change the number to be called.  
To enter an international code, press and hold the 0 key until the + sign  
displays.  
6. Press the OK soft key to save changes.  
Call Barring (SIM Dependent)  
The call barring network service allows you to restrict your calls. This option is SIM  
dependent and requires a subscription. For more information, contact your service  
provider.  
49  
 
Network Services  
Call Waiting  
This network service informs you when someone is trying to reach you during  
another call.  
You can specify individual call waiting options for voice calls or data calls.  
To set your call waiting options:  
1. From the Network Services menu screen, select Call Waiting.  
2. Select the call type, Voice Calls or Data Calls, to which the call waiting  
option is to be applied by pressing the Up or Down navigation key and then  
press the Select soft key or the  
key.  
The screen informs you whether call waiting is activated or deactivated.  
Select Cancel All to cancel all call waiting features.  
3. Press the Left soft key to Activate or Deactivate to turn off call waiting  
feature.  
Network Selection (SIM Dependent)  
The Network Selection feature enables you to automatically or manually select the  
network used when roaming outside of your home area.  
Note: You can select a network other than your home network only if there is a valid roaming agreement  
between the two.  
To indicate to automatically or manually select the network to be used when  
roaming:  
1. From the Network Services menu screen, select Network Selection.  
2. Press the Up or Down key until the appropriate option highlights, then  
press the Select soft key or the  
key.  
If you select Automatic, you are connected to the first available network  
when roaming.  
If you select Manual, go to step 3.  
3. Press the Up or Down key until the network you want highlights and then  
press the Select soft key or the  
key.  
The phone will scan for that network and you will be connected.  
Changing Your Settings 50  
 
Caller ID  
Allows you to setup the settings for the Caller ID feature. Choose from the following  
options:  
Set by Network: the network sets the caller ID option.  
Hide Number: blocks the number from being displayed.  
Show Number: shows the number when placing the call.  
Security  
The Security feature enables you to restrict the use of your phone by the others and  
to restrict the types of calls.  
Various codes and passwords are used to protect the features of your phone.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Settings and press the Select soft key or the  
key.  
key.  
3. Highlight Security and press the Select soft key or the  
The following options are available. Use the Up or Down navigation key to  
scroll to and set options:  
PIN Check  
When the PIN Check feature is enabled, you must enter your PIN each time you  
switch on the phone. Consequently, any person who does not have your PIN cannot  
use your phone without your approval.  
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Disable: the phone connects directly to the network when you switch it on.  
Enable: you must enter the PIN each time the phone is switched on.  
Change PIN  
This feature allows you to change your current PIN, provided that the Change PIN  
feature is enabled. You must enter the current PIN before you can specify a new one.  
Once you have entered a new PIN, you are asked to confirm it by entering it again.  
Phone Lock  
When the Phone lock feature is enabled, the phone is locked and you must enter the  
4- to 8-digit phone password each time the phone is switched on.  
The following options are available:  
51  
         
Security  
Disable: you are not asked to enter the phone password when you switch on the  
phone.  
Enable: you are required to enter the phone password when you switch on the  
phone.  
Change Password  
The Change Password feature allows you to change your current phone password to  
a new one. You must enter the current password before you can specify a new one.  
Once you have entered a new password, you are asked to confirm it by entering it  
again.  
Lock Applications  
Using this menu, you can lock the following categories:  
Lock All  
Address Book  
Recent Calls  
Text Message  
Downloaded Graphics  
Downloaded Ringtones  
1. Select the applications you want to lock by using the Navigation keys to  
highlight the application and press the Select soft key or the  
key to  
lock your contents.  
2. Press the OK soft key. Enter your Password and press the OK soft key.  
3. To access these locked applications, you must first enter the phone’s  
password to access the associated menus.  
SIM Lock  
When the SIM Lock feature is enabled, your phone only works with the current SIM.  
You must enter the SIM lock code to unlock the SIM so you can use a different SIM  
card.  
Once you have entered the lock code, you are asked to confirm your password.  
Reenter your password and press the OK soft key.  
The following options are available:  
Disable: you are not asked to enter the phone password when you switch on the  
phone.  
Enable: you are required to enter the phone password when you switch on the  
phone.  
Changing Your Settings 52  
 
FDN Mode  
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your  
outgoing calls to a limited set of phone numbers. When this feature is enabled, you  
can make calls only to phone numbers stored in the FDN list on the SIM card.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call the phone numbers stored in the SIM FDN list.  
You must first enter your PIN2 password.  
Change PIN2  
The Change PIN2 Code feature allows you to change your current PIN2 to a new one.  
You must enter the current PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
Reset Settings  
You can easily reset your phone to its default settings. To reset your phone:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Reset Settings and press the Select soft key or the  
key.  
4. The following options are available. Use the Up or Down navigation key to  
scroll to and set options. Choose from the following:  
• All  
• Phone Settings  
• Display Settings  
• Sound Settings  
5. Press either the Select soft key or the  
key to make your selection by  
placing a checkmark adjacent to the option.  
6. Press the Reset soft key  
7. At the “Reset Settings?” prompt, press either the Yes soft key to reset, or  
the No soft key to cancel. When you select the Yes soft key at the "Reset  
Settings" prompt, you need to enter your phone password. Once your  
phone has been reset to its default settings for those selected options, it  
will restart itself in order to incorporate the new settings.  
53  
   
Reset Settings  
Note: To completely remove any personal information stored on your device, see "Precautions for Transfer  
Changing Your Settings 54  
Section 9: Applications  
Topics Covered  
The topics covered in this section are calculator, converter, and world time  
applications.  
Calculator  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Applications and press the Select soft key.  
3. Highlight Calculator and press the Select soft key or the  
key.  
4. Enter the first number using the numeric keys.  
Note: To include a decimal point or a bracket, press the  
key until the symbol you want displays.  
5. Enter the operation for your calculation by pressing the  
key and  
cycling to the desired choice, according to the illustration on the display.  
6. Enter the second number.  
7. To view the result, press either the Equal soft key or the  
key.  
Converter  
The conversion menu provides the following conversion categories:  
Length  
Weight  
Volume  
Area  
Temperature  
55  
         
World Time  
World Time  
World Time allows you to view the time of day or night in another parts of the world.  
World displays time in the 24 different time zones around the world.  
1. Highlight World Time and press the Select soft key or the  
key.  
2. Use the Navigation keys to move the onscreen time line to the new desired  
time zone.  
3. To save the new time zone, press either the Set soft key or the  
4. Assign the new time as your new local time by highlighting Set Local and  
pressing the Select soft key or the key.  
5. Remove the Daylight Saving Time feature by pressing the Set soft key,  
highlighting Remove DST and pressing the Select soft key or the key.  
key.  
Applications 56  
   
Section 10: WAP  
Topics Covered  
Launching the WAP Browser  
Accessing a WAP Site  
Navigating the WAP Browser  
Using Favorites  
Downloading Multimedia Files  
Clearing the Cache  
Your phone is equipped with a WAP (Wireless Application Protocol) browser which  
allows you to access Internet specified for mobile phones. This section explains how  
to access the WAP services of your service provider and navigate the WAP browser.  
Launching the WAP Browser  
1. In Idle mode, press the  
key to launch the WAP browser. You can also  
press the Menu soft key to access menu mode.  
2. Highlight MEdia Net Home and press the Select soft key or the  
key.  
Your phone is connected to the network and loads the homepage of the  
Wireless Web service provider. The content of the start-up homepage  
depends on your Wireless Web service provider.  
3. To scroll through the screen, use the Up and Down navigation keys.  
4. To exit the browser at any time, simply press the  
key.  
Access a WAP Site  
There are several ways to access a WAP site:  
Selecting a link on the browser.  
Using a bookmark item in the Favorites folder; use the Favorites option on the  
browser menu list or Favorites menu.  
Entering a URL address manually; use the Go to URL option on the browser menu  
list.  
57  
     
Navigating the WAP Browser  
Navigating the WAP Browser  
1. To scroll through browser items, press the Up or Down navigation keys.  
2. To select a browser item, press the  
key or press the Select soft key.  
3. To return to the previous page, press the  
key, or press the Options  
soft key and choose Back.  
4. To access the browser menu list, press the Menu soft key.  
5. To return to the start-up homepage, press the Menu soft key and select the  
Home option.  
Entering Text in the WAP Browser  
When you are prompted to enter text, the currently active text input mode is  
indicated on the screen. To change the text input mode, press the  
more times.  
key one or  
The following modes are available:  
Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.  
Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.  
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.  
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this  
mode, you can use only the 0 key to display alternative words. To change case,  
press the  
key.  
Number Mode (1): allows you to enter numbers.  
Selecting and Using Menu Options  
Various menus are available when you are using the WAP Browser to navigate the  
Wireless Web.  
To access a menu option, press the menu soft key. A menu list displays.  
Press the Up Navigation key to highlight the Open Wave icon and press the Select  
soft key or the  
key.  
Note: The menus may vary, depending on your version of the WAP Browser.  
The following options are available:  
Go to URL: allows you to manually enter the URL address of a WAP site. After  
entering an address, press the OK soft key to go there directly.  
WAP 58  
 
Favorites: shows the bookmarks list. You can bookmark the current page or  
access previously bookmarked pages.  
Text Messages: allows you to create a text message, review text messages in  
your Inbox or Outbox.  
My Stuff: allows you to view the items stored in the Audio and Graphic, and  
Memory Status, and to Delete All in the folder.  
Home: takes you back at any time to the homepage of the Wireless Web service  
provider.  
Back: returns you to the previous menu.  
Show URL: displays the URL address of the page to which you are currently  
connected. It also enables you to set the current site as the startup homepage.  
Reload: reloads the current page.  
Using Favorites  
While navigating the WAP browser, you can bookmark the site to quickly and easily  
access it at a future time. The URL addresses of the bookmarked sites are stored in  
the Favorites folder, wherein you can use the 5-preset URL addresses and store your  
favorite URL addresses.  
Accessing a WAP Site Using Favorites  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight MEdia Net and press the Select soft key or the  
3. Select Favorites.  
key.  
4. Select a bookmark item on the Favorite list.  
Storing a URL Address  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight MEdia Net and press the Select soft key or the  
3. Select Favorites.  
key.  
4. Highlight an <Empty> location, and press the Select soft key.  
5. Enter the address and press the OK soft key and then enter the name and  
press the OK soft key to save  
6. When you have finished, press the  
key.  
Editing a Bookmark  
1. From the Favorites list, select the bookmark you want to change.  
2. Press the Select soft key and select Edit.  
59  
 
Downloading Multimedia Files  
3. Change the address and the name, as you would when storing a new one.  
4. Press the OK soft key.  
5. When you have finished, press the  
key.  
Deleting a Bookmark  
1. From the Favorites list, select the bookmark you want to delete.  
2. Press the Select soft key and select Delete.  
3. At the “Delete?” confirmation screen, press the Yes soft key or the  
key  
to confirm deletion or press the No soft key to cancel deletion.  
4. When you have finished, press the  
key.  
Downloading Multimedia Files  
You can buy a variety of multimedia files, such as ringtones, graphics, applications,  
Multimedia contents, and so on from the WAP browser and download them to your  
phone’s memory. Your phone has embedded links to the WAP sits providing you with  
download services, preset by your service provider.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight AT&T Mall and press the Select soft key or the  
key.  
3. Highlight Shop Tones, Shop Graphics, Shop Multimedia, or MEdia Net  
Home, depending on the type of items you want to buy.  
4. Press the Connect soft key or the  
key to connect.  
5. Find the item you want to download and follow the on-screen instructions  
to purchase it.  
Clearing the Cache  
The cache is the phone’s temporary memory in which the most recently accessed  
WAP pages are stored. You can clear the cache at anytime.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight MEdia Net and press the Select soft key or the  
key.  
3. Select Clear Cache.  
4. Press the Yes soft key or the  
key to confirm the deletion.  
key.  
5. When you have finished, press the  
WAP 60  
     
Changing the WAP Profiles  
You can set up server profiles for the WAP browser.  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Select MEdia Net. Highlight Browser Profiles and press the Select soft  
key or the  
3. To change the current browser profile, highlight Current Profile and press  
the Select soft key or the key.  
key.  
The Current Profile allows you to set the options for current browser profle.  
Choose from the following options: MEdia Net or Profiles 1-5.  
4. Highlight Profile Settings and press the Select soft key or the  
key.  
5. Select the profile you want. For each profile, the following options are  
available:  
• Profile Name: enter a name that you wish to assign to the HTTP proxy server.  
• Home URL: set the address of your startup homepage. When the default  
homepage displays, you can delete it using the  
choice.  
key and enter your own  
• Proxy use: place a check in the box to use the proxy server.  
• GPRS setting: allows you to choose from the following options:  
-
-
-
Proxy Address: enter the Proxy address of the proxy server.  
Proxy Port: enter a port number or use default setting.  
APN: enter the access point name used for the address of the GPRS network  
gateway.  
-
-
Login ID: enter the User ID required to connect to the GPRS network.  
Password: enter the password required to connect to the GPRS network.  
Note: The WAP settings may vary depending on the service provider.  
61  
Health and Safety Information  
Section 11: Health and Safety Information  
Topics Covered  
This section outlines the safety precautions associated with using your phone. These  
safety precautions should be followed to safely use your phone.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for radio frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. government.  
Health and Safety Information 62  
     
These FCC exposure limits are derived from the recommendations of two expert  
organizations, the National Counsel on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,  
the recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body expressed in units of watts  
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit  
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a  
substantial margin of safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the  
actual SAR level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC. For body worn operation, this  
phone has been tested and meets FCC RF exposure guidelines when used with an  
accessory that contains no metal and that positions the handset a minimum of  
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC  
RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with all  
reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to the FCC  
are:  
850  
Head - 0.516 W/Kg  
Body - 0.507 W/Kg  
1900 Head - 0.962 W/Kg  
Body - 0.433 W/Kg  
63  
Samsung Mobile Products and Recycling  
SAR information on this and other model phones can be viewed on-line at  
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model  
phone, this site uses the phone FCC ID number which is usually printed somewhere  
on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number. Once  
you have the FCC ID number for a particular phone, follow the instructions on the  
website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile phones and genuine Samsung accessories.  
UL Certified Travel Adapter  
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please  
adhere to the following safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW  
THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT  
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS  
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a series of Questions  
and Answers for consumers relating to radio frequency (RF) exposure from wireless  
phones. The FDA publication includes the following information:  
Health and Safety Information 64  
     
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with built-in  
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio frequency energy (RF) because of  
the short distance between the phone and the user's head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety agencies.  
When the phone is located at greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure decreases rapidly with increasing  
distance from the source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at far lower power  
levels, and thus produce RF exposures well within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radio frequency  
energy (RF) in the microwave range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels of RF can produce health  
effects (by heating tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new drugs  
or medical devices. However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of wireless phones to  
notify users of the health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
65  
Consumer Information on Wireless Phones  
Although the existing scientific data do not justify FDA regulatory actions, FDA has  
urged the wireless phone industry to take a number of steps, including the following:  
Support needed research into possible biological effects of RF of the type emitted  
by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the user that  
is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible information  
on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group  
activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
FCC also regulates the base stations that the wireless phone networks rely upon.  
While these base stations operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this  
document.  
Health and Safety Information 66  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have  
suffered from flaws in their research methods. Animal experiments investigating the  
effects of radio frequency energy (RF) exposures characteristic of wireless phones  
have yielded conflicting results that often cannot be repeated in other laboratories. A  
few animal studies, however, have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals. However, many of the studies that  
showed increased tumor development used animals that had been genetically  
engineered or treated with cancer-causing chemicals so as to be pre-disposed to  
develop cancer in absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the results  
of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic  
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful health effects from wireless  
phones RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-up may be needed to  
provide answers about some health effects, such as cancer. This is because the  
interval between the time of exposure to a cancer-causing agent and the time  
tumors develop - if they do - may be many, many years. The interpretation of  
epidemiological studies is hampered by difficulties in measuring actual RF exposure  
during day-to-day use of wireless phones. Many factors affect this measurement,  
such as the angle at which the phone is held, or which model of phone is used.  
67  
Consumer Information on Wireless Phones  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to radio  
frequency energy (RF).  
FDA has been a leading participant in the World Health Organization international  
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result  
of this work has been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF  
issues.  
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal  
Cooperative Research and Development Agreement (CRADA) to do research on  
wireless phone safety. FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations. CTIA-funded research  
is conducted through contracts to independent investigators. The initial research will  
include both laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the context of the  
latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not know that there is  
- it is probably very small. But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since the  
exposure level drops off dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if  
you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
Health and Safety Information 68  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radio frequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will reduce RF  
exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience and comfort. These systems  
reduce the absorption of RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against the head. On the other hand, if  
the phone is mounted against the waist or other part of the body during use, then  
that part of the body will absorb more RF energy. Wireless phones marketed in the  
U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in  
compliance with the safety limit.  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that claim to shield the user from  
RF absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
69  
Consumer Information on Wireless Phones  
In February 2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to FTC, these defendants  
lacked a reasonable basis to substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some electronic  
devices. For this reason, FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a compatible  
phone and a compatible hearing aid at the same time. This standard was approved  
by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with  
other medical devices. Should harmful interference be found to occur, FDA will  
conduct testing to assess the interference and work to resolve the problem.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (Updated 12/1/2006):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
Health and Safety Information 70  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration  
Road Safety  
Your wireless phone gives you the powerful ability to communicate by voice, almost  
anywhere, anytime. But an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility. When using your wireless  
phone behind the wheel of a car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such as speed dial and  
redial. If available, these features help you to place your call without taking  
your attention off the road.  
2. When available, use a hands-free device. If possible, add an additional  
layer of convenience and safety to your wireless phone with one of the  
many hands free accessories available today.  
3. Position your wireless phone within easy reach. Be able to access your  
wireless phone without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice mail answer it for you.  
4. Let the person you are speaking with know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions. Rain,  
sleet, snow, ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while driving. Jotting down a  
"to do" list or flipping through your address book takes attention away  
from your primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls when you are  
not moving or before pulling into traffic. Try to plan calls when your car will  
be stationary. If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then continue.  
7. Do not engage in stressful or emotional conversations that may be  
distracting. Make people you are talking with aware you are driving and  
suspend conversations that have the potential to divert your attention from  
the road.  
71  
 
Responsible Listening  
8. Use your wireless phone to call for help. Dial 9-1-1 or other local  
emergency number in the case of fire, traffic accident or medical  
emergencies. Remember, it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If you see an auto  
accident, crime in progress or other serious emergency where lives are in  
danger, call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency wireless assistance  
number when necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency number.  
"The wireless industry reminds you to use your phone safely when driving."  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Provided by the Cellular Telecommunications & Internet Association.  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cellular telephones, at high  
volume settings for long durations may lead to permanent noise-induced hearing  
loss. This includes the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound has also been  
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
Individual susceptibility to noise-induced hearing loss and potential hearing problem  
varies. Additionally, the amount of sound produced by a portable audio device varies  
depending on the nature of the sound, the device settings, and the headphones that  
are used. As a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings and equipment.  
Health and Safety Information 72  
 
You should follow some commonsense recommendations when using any portable  
audio device:  
Set the volume in a quiet environment and select the lowest volume at which you  
can hear adequately.  
When using headphones, turn the volume down if you cannot hear the people  
speaking near you or if the person sitting next to you can hear what you are  
listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen  
to your portable device in a noisy environment, you noise-cancelling headphones  
to block out background environmental noise. By blocking background  
environment noise, noise cancelling headphones should allow you to hear the  
music at lower volumes than when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required  
before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock  
concerts, that might cause temporary hearing loss. Temporary hearing loss might  
cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in  
your ears, hear muffled speech or experience any temporary hearing difficulty  
after listening to your portable audio device, discontinue use and consult your  
doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
73  
Operating Environment  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Operating Environment  
Remember to follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any accessory to another device, read its  
user's guide for detailed safety instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to discuss alternatives.  
Health and Safety Information 74  
   
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless phone and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their implantable  
medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the  
potential for interference;  
Should turn the phone OFF immediately if there is any reason to suspect that  
interference is taking place.  
Should read and follow the directions from the manufacturer of your implantable  
medical device. if you have any questions about using your wireless phone with  
such a device, consult your health care provider.  
Hearing Aids  
Some digital wireless phones may interfere with some hearing aids. In the event of  
such interference, you may wish to consult your hearing aid manufacturer to discuss  
alternatives.  
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your phone  
off in health care facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do so.  
75  
Potentially Explosive Environments  
Potentially Explosive Environments  
Switch your phone off when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a refueling point (service station).  
Users are reminded of the need to observe restrictions on the use of radio equipment  
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always clearly  
marked. They include below deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as propane or butane), areas where the  
air contains chemicals or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless and  
landline networks as well as user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never rely solely on any wireless  
phone for essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on and in a  
service area with adequate signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911  
or other official emergency number). Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary information as  
accurately as possible. Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off the call until given  
permission to do so.  
Health and Safety Information 76  
   
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase  
your phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries, antennas and chargers. The  
use of any unauthorized accessories may be dangerous and void the phone warranty  
if said accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the same  
compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great  
force. Do not place objects, including both installed or portable wireless equipment  
in the area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates, serious injury could  
result.  
77  
   
Product Performance  
Switch your phone off before boarding an aircraft. The use of wireless phone in  
aircraft is illegal and may be dangerous to the aircraft's operation.  
Failure to observe these instructions may lead to the suspension or denial of  
telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number  
of bars next to the signal strength icon. The more bars displayed, the stronger the  
signal.  
If you're inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power Save  
feature is automatically activated. If your phone is active, it periodically rechecks  
service availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should service your  
phone and accessories. Faulty service may void the warranty.  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
If your phone is equipped with an external antenna, hold the phone with the  
antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the internal  
antenna could inhibit call performance.  
Health and Safety Information 78  
 
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it is  
inoperable, call Customer Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may require additional  
subscription and/or usage charges. Not all features are available for purchase or use  
in all areas. Downloadable Ring Tones may be available at an additional cost. Other  
conditions and restrictions may apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone usage patterns and conditions.  
Battery power consumption depends on factors such as network configuration,  
signal strength, operating temperature, features selected, frequency of calls, and  
voice, data, and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can  
potentially cause damage to the phone and battery. If you suspect damage to the  
phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses less power; talk and  
standby time are greatly affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Follow battery usage, storage and charging guidelines found in the user’s guide.  
Battery charging time depends on the remaining battery charge and the type of  
battery and charger used. The battery can be charged and discharged hundreds of  
times, but it will gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only with  
Samsung-approved chargers. When a charger is not in use, disconnect it from the  
power source.  
Do not use incompatible cell phone batteries and chargers. Some Web sites and  
second-hand dealers, not associated with reputable manufacturers and carriers,  
79  
     
Battery Precautions  
might be selling incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier recommended products and  
accessories.  
Extreme temperatures will affect the charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in summer or winter  
conditions, as you will reduce the capacity and lifetime of the battery. Always try to  
keep the battery at room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0 °C (32 °F). The battery should not  
be charged at temperatures below 0 degrees C (32 degrees F) or above 45  
degrees C (113 degrees F).  
Do not place the phone in areas that may get very hot, such as on or near a  
cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and appear to  
operate normally, the circuitry could slowly corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip, key, jewelry or pen) causes a direct connection between  
the + and - terminals of the battery (metal strips on the battery), for example when  
you carry a spare battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Do not crush, puncture or put a high degree of pressure on the battery as this can  
cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some areas, the  
disposal of batteries in household or business trash may be prohibited. For safe  
disposal options for Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a fire.  
Health and Safety Information 80  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you fulfill any warranty obligations and  
allow you to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of the reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will  
corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric shock to  
you or damage to the phone.  
Do not use or store the phone in dusty, dirty areas, as its moving parts may be  
damaged.  
Do not store the phone in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to its normal  
operating temperature, moisture can form inside the phone, which may damage  
the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device's moving parts and prevent  
proper operation.  
Do not put the phone in or on heating devices, such as a microwave oven, a stove  
or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the supplied or an  
approved replacement antenna. Unauthorized antennas or modified accessories  
may damage the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly, take it to  
your nearest qualified service facility. The personnel there will assist you, and if  
necessary, arrange for service.  
81  
 
Standard Limited Warranty  
Section 12: Warranty Information  
Topics Covered  
Standard Limited Warranty  
What is Covered and For How Long? SAMSUNG  
TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the original  
purchaser ("Purchaser") that SAMSUNG's Phones and accessories ("Products") are  
free from defects in material and workmanship under normal use and service for the  
period commencing upon the date of purchase and continuing for the following  
specified period of time after that date:  
Phone  
1 Year  
1 Year  
Batteries  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of  
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or  
electromechanical stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched  
or damaged due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,  
operation, maintenance, installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased outside the United States or  
Canada.  
Warranty Information 82  
       
This Limited Warranty covers batteries only if battery capacity falls below 80% of  
rated capacity or the battery leaks, and this Limited Warranty does not cover any  
battery if (i) the battery has been charged by a battery charger not specified or  
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery  
are broken or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to  
Purchaser, any defective component part of Product. To obtain service under this  
Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales  
receipt or comparable substitute proof of sale showing the date of purchase, the  
serial number of Product and the sellers' name and address. To obtain assistance on  
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts  
or components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches and  
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced  
Product will be warranted for a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 days, whichever is longer. All replaced  
parts, components, boards and equipment shall become the property of SAMSUNG.  
If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
83  
Standard Limited Warranty  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY  
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE  
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM  
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED  
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR  
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME  
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN  
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL  
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE  
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS  
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE  
Warranty Information 84  
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR  
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER  
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY  
BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and  
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the standard methods,  
the data only appears to be removed on a superficial level, and it may be possible for  
someone to retrieve and reuse the data by means of special software.  
To avoid unintended information leaks and other problems of this sort, it is  
recommended that the device be returned to Samsung’s Customer Care Center for  
an Extended File System (EFS) Clear which will eliminate all user memory and return  
all settings to default settings. Please contact the Samsung Customer Care Center  
for details.  
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in  
order to provide this service at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
85  
 
Standard Limited Warranty  
Samsung Telecommunications America, LLC  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2007 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
Warranty Information 86  
Display  
Icons 11  
Index  
Display Settings 45  
A
E
Accessing a Menu Function 23  
Address Book  
End key 13  
Ending a Call 16  
Entering Text 28  
Searching for a Number 21  
Alphabet Mode 28  
Audio 44  
Changing the Text Input Mode  
Using Alphabet Mode 30  
Using Numbers 31  
Using Symbols 31  
Using T9 Mode 29  
B
Battery  
charging 5  
Installation 4  
low indicator 6  
Removal 3  
F
Functions and Options 12  
C
G
Calculator 55  
Getting Started 3  
Activating Your Phone 3  
Voicemail 7  
Call Functions 15  
Adjusting the Call Volume 16  
Answering a Call 17  
Correcting the Number 15  
Making a Call 15  
Greeting Message 48  
H
Health and Safety Information 62  
Quiet Mode 19  
Recent Calls 17  
Redialing Last Number 16  
Call Time 18  
Call Waiting 22, 50  
Charging battery 5  
Clear key 13  
Command Keys 13  
Converter 55  
I
International Call 15  
K
Keypad Tone 45  
L
Left soft key 13  
Low battery indicator 6  
D
M
Data Call Time 19  
Data Volume 18  
Dialing a Number  
Address Book 32  
Making a Call  
Address Book 16  
Menu Navigation 23  
Menu Outline 24  
87  
 
Messaging 39  
Missed Call  
Sound Settings 44  
Speakerphone Key 19  
Speed Dial  
Deleting 18  
Viewing 17  
Multimedia Files  
Downloading 60  
Mute 21  
Setting Up Entries 35  
Standard Limited Warranty  
Storing a Number  
Address Book 33, 34  
Phone’s Memory 33  
SIM Card 34  
N
Navigation key 14  
Numeric Mode 28  
Symbols Mode 28  
O
T
Options  
During a Call 19  
T9 Mode 28  
enter a word 29  
Text Input Mode  
Changing 28  
Putting a Call on Hold 19  
P
Travel adapter 5  
Phone  
icons 11  
Phone Lock 51  
PIN  
Change 51  
PIN Check 51  
Powering on/off  
phone 6  
U
Understanding Your Address book 32  
Adding a New Contact 33  
Management 37  
Own Phone Number 36  
Speed Dial 35  
Using Contacts List 32  
Understanding Your Phone 8  
Closed View of Your Phone 10  
Features of Your Phone 8  
Open View of Your Phone 9  
Using Management  
R
S
Right soft key 13  
Security 51  
Send key 14  
Settings 44  
Checking the Memory Status  
Reset Settings 53  
Shortcuts 24  
SIM card  
Installation 4  
Removal 4  
Soft Keys 13  
Copying all to Phone 37  
Deleting all of the Phone book  
Entries 37  
V
Voice Mail  
88  
Accessing 7  
Changing the Number 7  
Setup 7  
W
Warranty Information 82  
89  

Tripp Lite U238 000 1 User Manual
Toshiba SD R1512 User Manual
Toshiba MK4018GAS (HDD2170) User Manual
Toastmaster TCM12PW User Manual
Sony CDX GT51W User Manual
Siemens C45 User Manual
Seagate SAVVIO 10K5 FC ST9900805FC User Manual
Seagate Backup Plus STCB2000900 User Manual
Philips CD Player AZ1837 User Manual
Oregon Scientific Radio controlled Clock RM982A User Manual