Samsung SGH Z500 User Manual

* Depending on the software installed or your service provider, some of the descriptions in this manual may

not match from your phone.

* Depending on your country, your phone and accessories may appear different from the illustrations

in this manual.

Printed in Korea

World Wide Web

Code No.:GH68-06933A

English. 08/2005. Rev 1.2

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving.

Park the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point

(service station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference.

Using them in an aircraft is both illegal and

dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be

using equipment that could be sensitive to

external radio frequency energy. Follow any

regulations or rules in force.

Interference

All wireless phones may be subject to

interference, which could affect their

performance.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Qualified service

Use only in the normal position (held to the ear).

Avoid unnecessary contact with the antenna when

the phone is switched on.

Only qualified service personnel may repair your

phone.

For more detailed safety information, see "Health

and safety information" on page 78.

Emergency calls

Key in the emergency number for your present

location, then press

Keep your phone away from small children

Keep the phone and all its parts, including

accessories, out of the reach of small children.

About this Guide

•

Your phone is capable of operating

in a 3G environment, allowing

much greater data transfer speed,

video streaming, and video

conferencing.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Indicates that you need to pay careful

attention to the subsequent

information regarding safety or phone

features.

Special

features of your phone

ꢀ

Indicates that you can get more

information on the referenced page.

•

Camera and Camcorder

Use the camera module on your

phone to take a photo or record a

video.

→

Indicates that you need to press the

Navigation keys to scroll to the

specified option and then select it.

[

]

Indicates a key on the phone. For

•

Media Player

Play media files on your phone.

example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For

example, <Msg

IrDA

Send and receive Phonebook and

Organiser data and media files via

an infrared port.

•

Bluetooth

•

E-mail

Send photos, images, videos, and

other personal data, and connect to

other devices using free, wireless

Bluetooth technology.

Deliver e-mails with images, video, and audio

attachments.

•

Java

Enjoy Java™-based embedded

games and download new games.

•

WAP browser

Access the wireless web and access

various services and current

information.

•

Organiser

Keep track of your daily, weekly,

and monthly schedule.

Get Personal with Photo Caller

See who’s calling you with their

very own photo displays.

Voice recorder

Record memos or sounds.

•

Name card

Create name cards with your

number and profile whenever

introducing yourself to others use

this convenient electronic name

card.

•

Multimedia Message Service (MMS)

Deliver MMS messages with a combination of

text, images, and audio.

Use Contacts................................................... 17

Send messages ............................................... 18

View messages................................................ 20

Use Bluetooth wireless...................................... 20

Use a memory card.......................................... 21

Contents

Special features of your phone

Unpack

Enter text

Make sure you have each item

Your phone

ABC, T9, Number, and Symbol mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

All menu options listed

Solve problems

Install and charge the phone .............................. 7

Power on or off................................................. 8

Keys and display............................................... 9

Display........................................................... 10

Access menu functions...................................... 11

Customise your phone...................................... 12

Make/Answer calls............................................ 14

Help and personal needs

Health and safety information

Index

Step outside the phone

Begin with your camera, games, WAP, and other special

features

Use camera..................................................... 14

Play media files ............................................... 15

Play games ..................................................... 16

Browse the web............................................... 16

Overview of menu functions

To access Menu mode, press

in Idle mode.

Call log

ꢀp. 29

4 Internet

ꢀp. 39

Organiser

ꢀp. 57

Missed calls

Dialled calls

Received calls

Current contacts

Delete all

ꢀ

p. 29

p. 30

p. 31

Go to homepage

Enter URL

Favorites

History

Browser settings

Network settings

ꢀ

p. 39

p. 40

p. 41

Alarm

Calendar

Week view

Today’s events

Schedule

Anniversary

Task

Memo

Missed event alarm

Memory status

ꢀ

p. 58

p. 60

p. 61

Data calls

Calls cost^*

5 Messages

ꢀp. 41

Calls time

Create new

Inbox

Drafts

ꢀp. 41

ꢀp. 43

ꢀp. 45

ꢀp. 46

ꢀp. 47

ꢀp. 48

ꢀp. 52

Contacts

ꢀp. 31

Search contact

New contact

Groups

Speed dial

My name card

Copy all

ꢀp. 31

ꢀp. 32

ꢀp. 33

ꢀp. 34

Camera

ꢀp. 61

Outbox

Sent box

Email inbox

Media Album^**

Templates

Broadcast

Delete all

Settings

ꢀp. 66

Profiles

Time & date

Phone

Display

Call

Connectivity

Application settings

Security

Memory status

Reset settings

ꢀp. 66

ꢀp. 67

ꢀp. 68

ꢀp. 70

ꢀp. 74

ꢀp. 75

ꢀp. 76

Own number

Service number

Settings

Memory status

# Memory status

Applications

ꢀp. 35

6 File manager

ꢀp. 52

SAT

Images

Videos

Music

Sounds

Games & More

Other files

Memory card^***

ꢀp. 52

ꢀp. 53

ꢀp. 55

ꢀp. 56

ꢀp. 57

ꢀp. 35

ꢀp. 37

ꢀp. 38

Media player

Voice memo

World clock

Calculator

* Shows only if supported by your SIM card.

** Shows only if supported by your service

provider.

Converter

*** Shows only if a memory card is

inserted into the phone.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Travel Charger

Phone

Exterior

camera

lens

Interior

camera lens

Camera

key

Menu access/

confirm key

Application

switch key

Video call key

Navigation keys

Right soft key

Battery

PC Data Cable

User’s Manual

External

display

Memory

card slot

Headset jack

Power On/Off/

Menu exit key

Left soft key

Volume keys

PC Link CD

Alphanumeric keys

Dial key

Delete key

Microphone

Infrared port

You can obtain various accessories

from your local Samsung dealer.

Special

function keys

The items supplied with your

phone and the accessories at

your Samsung dealer may vary,

depending on your country or

service provider.

Get started

First steps to operating your phone

Install the battery.

Plug the travel

charger into the

phone.

SIM card information

When you subscribe to a cellular network, you

receive a plug-in SIM (Subscriber Identity Module)

card loaded with your subscription details, such as

your PIN and available optional services. For 3G

services, you can purchase a USIM card.

Install and charge the phone

Plug the charger into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

The LED on the charger indicates the charging

progress.

• Red: the battery is being charged.

• Green: the battery is completely charged.

• Orange: the battery is not correctly installed

or is operating at a too high or too low

temperature.

If the phone is already

on, first turn it off by

holding [ ].

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

When the phone is completely charged (green

charger LED), unplug the charger from the

power outlet.

Get started

Power on or off

Remove the charger from the phone.

Power on

1. Open the phone.

2. Press and hold [ ] to turn

on the phone.

Do not turn on the

phone when

mobile phone use

is prohibited.

3. If necessary, enter the PIN

Low battery indicator

and press <Confirm>.

When the battery is low:

•

a warning tone sounds,

the battery low message displays, and

the empty battery icon

blinks.

Power off

1. Open the phone.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

2. Press and hold [ ].

Keys and display

Key(s)

Description

Key(s)

Description

Ends a call.

Hold down to switch the phone on and

off.

Perform the function indicated on the

bottom line of the display.

In Menu mode, cancel input and return

the phone to Idle mode.

In Idle mode, access menu options

directly.

ꢀp. 67

Enter numbers, letters, and some

special characters.

In Menu mode, scroll through the

menu options.

In Idle mode, hold [1] down to access

In Idle mode, accesses Menu mode.

your voicemail. Hold down [0] to enter

an international call prefix.

In Menu mode, select a highlighted

menu option.

Enter special characters.

Opens the application switch window to

Hold [ ] down to activate or

deactivate the Silent profile. Hold down

[ ] to enter a pause.

open Call Messages, and Internet

without exiting the current application.

Adjust the phone volume.

Makes a video call.

In Idle mode, adjust the keypad tone

volume. With the phone closed, hold

down to activate the external display.

Makes or answers a call.

(on the left)

In Idle mode, retrieves the recent

numbers dialled, missed, or received.

Hold down to turn on the camera.

In Camera mode, switches the camera

lens.

Deletes characters from the display or

an item in an application.

(on the right)

Get started

Display

Layout

Icons

(continued)

Video call in progress

The display has three areas.

Out of your service area; you

cannot send or receive video

calls

Icons

displays various icons.

Text and graphics

displays messages,

instructions, and

Bluetooth feature is active;

When transferring data, this

icon blinks red and blue.

information you enter.

ꢀ

p. 71

Soft key function

indicators

shows the current

functions assigned to

the two soft keys.

Select

Back

Connected with a Bluetooth

headset or hands-free kit

IrDA port is active

ꢀp. 72

Memory card inserted

Icons

Received signal strength

Connected with a computer

via a USB port

Accessing services in a 2.5G

network; when transferring

data, this icon animates.

Browsing the Internet on a

PC using the phone as a

modem

Accessing services in a 3G

network; when transferring

data, this icon animates.

Connected to a secured web

page

Active roaming feature

Voice call in progress

Out of your service area; you

cannot send or receive voice

calls

Access menu functions

Icons

(continued)

New message; depending on

the message type, the

following icons may appear.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

display indicates their current

role.

•

: SMS

: MMS or MMS with

attachments

•

: E-mail

: Voicemail

: WAP push

: Configuration message

Select

Back

Inbox full; depending on the

message type, the following

icons may appear.

•

: SMS

: MMS or MMS with

attachments

•

: E-mail

: Voicemail

: WAP push

: Configuration message

Press the left soft

key to confirm the

function displayed

or option

Press the right soft

key to move up

one level.

highlighted.

Profile setting

ꢀp. 67

In each main menu, one of the

most popular sub menu is

assigned to the left soft key.

This allows you to quickly

access the most popular

menus.

•

: Normal

: Meeting

: Car

: Silent

: Outdoor

Battery power level

Get started

Customise your phone

Select an

option

1. Press the appropriate soft

1. In Idle mode, press

select Settings Phone

Language Screen text

and

→

key or

mode.

to access Menu

Display

language

→

2. Press the Navigation keys to

move to the next or previous

option.

2. Select a language.

3. Press <Save>.

3. Press <Select>, <OK>, or

to confirm the function

displayed or option

You can change the call ringer by

changing the properties of the

currently active sound profile.

Call ringer

melody

highlighted.

To change the profile properties:

4. To exit, choose either of the

following methods:

1. In Idle mode, press

and

select Settings Profiles

→

•

Press <Back> to move

up one level.

2. Scroll the sound profile you

are using.

•

Press [ ] to return to

Idle mode.

3. Press <Options> and select

Edit

4. Select Voice call ringtone

and select a ringer for voice

calls.

Use shortcuts Press the number key

corresponding to the option you

want.

5. Press <Select>.

6. Select Video call ringtone

and select a ringer for video

calls.

7. Press <Select>.

8. Press <Options> and select

Save

To change the sound profile:

1. In Idle mode, press and

select Settings Profiles

You can protect the phone

against unauthorised use with a

phone password.

Phone lock

→

1. In Idle mode, press

select Settings Security

Change phone

password

and

2. Select the profile you want.

→

You can set a wallpaper for the

idle screen.

Idle mode

Wallpaper

2. Enter the default password,

“00000000,” and press

1. In Idle mode, press

select Settings Display

Wallpaper

2. Press [Left] or [Right] to

scroll to an image box

3. Select an image and press

Set>.

and

→

<Confirm>.

3. Enter a new 4- to 8-digit

password and press

<Confirm>.

4. Enter the new password

again and press <Confirm>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

Confirm>.

You can quickly activate the

Silent profile to avoid disturbing

other people.

Silent mode

Press and hold [ ] in Idle mode.

Make/Answer calls

Step outside the phone

Begin with your camera, games, WAP, and other special

features

To make a voice call:

Make a call

1. Enter an area code and

phone number.

Use camera

2. Press [ ].

1. In Idle mode, press and hold

3. To end the call, press [ ].

To make a video call:

Take a photo

[

] to turn on the camera.

2. Press [ ] to switch between

the interior lens and exterior

lens.

1. Enter an area code and

phone number.

2. Press [ ], and the other

person appears on the

screen.

3. Aim the camera lens at the

subject and adjust the image.

4. Press

photo is saved automatically.

5. Press to take another

photo.

to take a photo. The

1. When the phone is ringing,

press [ ].

Answer a call

2. For a video call, press

Show me> to allow the

1. In Idle mode, press

and

View a photo

other person to see you.

select File manager

→

3. To end the call, press [ ].

Images

2. Select the photo you want.

Press [ / ].

Adjust the

volume during

a call

Play media files

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

Use these methods:

Copy media

files to the

phone

2. Press [

mode.

1] to switch to Record

•

Download from the wireless

web p. 39

ꢀ

3. Press [ ] to switch between

the interior lens and exterior

lens.

•

Download from a computer

using Samsung PC Studio II

ꢀSamsung PC Studio User’s

Guide

4. Press

to start recording.

•

Copy files to a memory card

and insert the card into the

5. Press

to stop recording.

The video is automatically

saved.

phone

Receive via IrDA or

Bluetooth p. 72, p. 70.

ꢀp. 21

6. Press

video.

to record another

ꢀ

1. In Idle mode, press

and

Media

Create a play

list

1. In Idle mode, press

and

Play a video

select Applications

→

select File manager

→

player

2. Press <Options> and select

Open play list

3. Press <Options> and select

Add Folder or Files

Videos

2. Select the video you want.

→

4. Check the files you want or

scroll to the folder you want.

5. Press <Add> or <Select>.

Step outside the phone

1. Select PLAY

1. From the Media player

Play

Powerinlinex

Play media files

screen, press

2. Select a character.

2. Select the file you want.

3. Press <OK> to start a game.

3. During playback, use the

following keys:

4. Press [Up] to make the

character start.

•

: Pauses or resumes

play back.

5. Press the Navigation keys to

change the direction.

•

Up: Opens the play list.

Left: Goes to the previous

file. Moves backward in a

file when held down.

1. Select START GAME

Play

TheLastAge

2. Select New Game

3. Press <SKIP> then <OK>.

•

Right: Skips to the next

file. Skips forward in a file

when held down.

/ : Adjusts the volume.

Down: Stops playback.

4. Press [Up] to make the

machine move forward.

•

5. Press the Navigation keys to

change the direction.

Play games

Browse the web

Using a built-in WAP (Wireless Access Protocol)

browser, you can get easy access to the wireless

web to receive a variety of up-to-date information

and services and to enjoy downloads of web

contents.

1. In Idle mode, press

and

Select a game

select File manager

→

Games & More

→

the game

you want.

2. Press any key, except for

], to launch the game.

[

In Idle mode, press

select Internet Go to

homepage

and

Launch the

browser

→

•

To scroll through browser

items, press [Up] or [Down].

To the USIM/SIM card:

Navigate the

web

1. In Idle mode, enter a phone

number.

•

To select an item, press

To return to the previous

page, press <Back>.

2. Press <Options> and select

Save to Contacts

New

3. Specify the contact

information, depending on

→

SIM

→

•

To use browser options, press

Options>.

Use Contacts

your card type: Name, Phone

number, Group, and Location.

To the phone’s memory:

Add an entry

4. Press

to save the entry.

1. In Idle mode, enter a phone

number.

1. In Idle mode, press

Contacts>.

Find an entry

2. Press <Options> and select

Save to Contacts

→

Phone

2. Select an entry.

→

New a number type.

→

3. Select a number and press

3. Specify the contact

information: First name, Last

name, Work Email, Home

Email, Group, Homepage,

Birthday, and More

[

] to dial, or <Options> to

access options.

information (Job title,

Department, Company,

Nickname, and Notes).

4. Press <Options> and select

Save to save the entry.

Step outside the phone

1. In Idle mode, press <Msg.

and select Create new

Multimedia message

2. Enter the message subject.

3. Select Text

4. Enter the message text and

press

1. In Idle mode, press

select Contacts

card

and

My name

Create and

send your

name card

Send a

→

multimedia

message

(MMS)

2. Specify your contact

information.

3. Press <Options> and select

Save to save the name card.

4. To send the name card to

other people, access the My

name card menu again.

5. Select Picture or Audio

6. Add a media file.

7. Press <Options> and select

Send

5. Press <Options> and select

Send name card

→

the

8. Enter destination numbers or

e-mail addresses.

sending method you want.

Send messages

9. Press

message.

to send the

1. In Idle mode, press <Msg.

and select Create new

Text message

2. Enter the message text.

3. Press

4. Enter destination numbers.

5. Press to send the

message.

Send a text

message (SMS)

→

1. In Idle mode, press <Msg.

and select Create new

File messenger

Send an e-mail

Send files by

MMS

and select Create new

2. Enter the e-mail subject.

→

2. Enter the message subject.

3. Move to the Message field.

4. Enter the message text.

3. Move to the Message field.

4. Enter the e-mail text.

5. Move to the Attach files line.

6. Press <Options> and select

5. Move to the Attach files line.

6. Press <Options> and select

Add files

Add name card,

Add files

Add name card,

or Add v-calendar

7. Select images, videos,

sounds, name cards,

7. Select images, videos,

sounds, name cards,

schedule items, or tasks.

8. Press <Options> and select

Attach

9. Press

10.Enter e-mail addresses.

11.Press to send the e-mail.

8. Press <Options> and select

Attach

9. Press

10.Enter destination numbers

e-mail addresses.

11.Press

to send the

message.

Step outside the phone

View messages

1. In Idle mode, press <Msg.

View an e-mail

and select Email inbox

2. Press <Options> and select

Download

When a notification appears:

View a text

message

1. Press <View>.

2. Select a message from the

Inbox.

3. Select an e-mail or header.

4. If you selected a header,

From the Inbox:

press <Options> and select

1. In Idle mode, press <Msg.

Retrieve

and select Inbox

Use Bluetooth wireless

2. Select a text message (

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly

to other Bluetooth devices and exchange data with

them, talk hands-free, or control the phone

remotely.

When a notification appears:

View a

multimedia

message

1. Press <View>.

2. Press <Options> and select

Retrieve

3. Select a message from the

Inbox.

In Idle mode, press

Settings Connectivity

Bluetooth Activation

and select

Turn on

Bluetooth

→

From the Inbox:

1. In Idle mode, press <Msg.

1. In Idle mode, press

select Settings

Connectivity

My devices

new device

2. Select a device.

and

and select Inbox

2. Select an MMS message

Search for and

pair with a

Bluetooth

device

→

Bluetooth

→ Search

(

→

Use a memory card

You can use a memory card to enlarge your phone’s

capacity.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth

PIN code, if it has, and press

OK>.

•

Frequent erasing and writing will

shorten a memory card’s

lifespan.

Do not remove a memory card

from the phone or turn off the

phone while data is being

accessed or transferred. This

could result in loss of data and/

or damage to the card or phone.

Do not subject memory cards to

strong shocks.

Do not touch memory card

terminals with your fingers or

metal objects. If dirty, wipe the

card with a soft cloth.

Keep memory cards away from

small children or pets.

Do not expose memory cards in

a place subject to electro static

discharge and/or electrical

noise.

Important

memory card

information

When the owner of the other

device enters the same code,

the pairing is complete.

1. Access an application,

Send data

Contacts

Organiser

File manager, or

2. Select the item you want to

send.

•

3. Press <Options> and select

Send

schedule

Via bluetooth

4. Select a device.

(name card

task and etc.

)

→

•

5. If necessary, enter the

Bluetooth PIN and press

<OK>.

•

Use the memory card purchased

from a Samsung dealer.

To receive data via Bluetooth,

your phone’s Bluetooth feature

must be active.

Receive data

If necessary, press <Yes> to

confirm the reception.

Step outside the phone

1. Slide a memory card into the

memory card slot, with the

label side face down.

Insert a

memory card

2. Press the card until it locks

into place.

1. Press the memory card so

that it is disengaged from the

phone.

Remove the

memory card

2. Slide the card out of the slot.

2. Enter the whole word before editing or deleting

characters.

Enter text

3. When the word displays correctly, go to step 4.

ABC, T9, Number, and Symbol mode

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

You can enter text for some features such as

Messages, Phonebook, or Organiser, using ABC

mode, T9 mode, Number mode, and Symbol mode.

4. Press [ ] to insert a space and enter the next

word.

Changing the text input mode

The text input mode indicator displays when the

cursor is in a text input field.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

•

Press and hold [ ] to switch between T9 (

and ABC ( ) modes.

)

•

Press [Left] or [Right] to move the cursor.

Press [ ] to change case (

to switch to Number mode (

) or

Press [

] to delete characters one by one. Press

and hold [

C] to clear the entire display.

Press and hold [ ] to switch to Symbol mode

Adding a new word to the T9 dictionary

(

This feature may not be available for some

languages.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your

key presses. When there are no more alternative

words, Spell displays on the bottom line.

Entering a word in T9 mode

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

3. Press <Spell>.

4. Enter the word you want using ABC mode and

5], [5], and [6] to

press <Add>.

T9 predicts the word that you are typing, and it

may change with each key that you press.

Enter text

Using ABC mode

Using Number mode

Press the appropriate key until the character you

want appears on the screen.

Number mode enables you to enter numbers. Press

the keys corresponding to the digits you want.

Characters in order displayed

Key

Using Symbol mode

Upper case

Lower case

Symbol mode enables you to insert symbols.

Press

display more symbols

select a symbol

[Up] or [Down].

the corresponding

number key.

clear the symbol(s)

insert the symbol(s)

[

OK>.

Tips for using ABC mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the

cursor to move to the right automatically or

press [Right]. Then, enter the next letter.

•

Press [ ] to insert a space.

Press [Left] or [Right] to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

C] to clear the entire display.

You can also use the speed dial feature to assign

your most frequently called numbers to specific

Call functions

Advanced calling features

number keys.

ꢀp. 33

Dialling a number from the USIM/SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

Making a call

1. In Idle mode, enter the area code and phone

number.

2. Find the number you want.

2. Press [ ].

3. Press <Call> or [ ] to make a voice call, or

• Press

hold

[

]

to clear the last digit or press and

<V-Call> to make a video call.

[

to clear the whole display. You can

move the cursor to edit an incorrect digit.

Ending a call

Press [ ] or close the phone.

• Press and hold

[

]

to enter a pause between

numbers.

Answering a call

Making an international call

1. In Idle mode, press and hold [

0]. The

When you receive an incoming call, the phone rings

and displays the incoming call image.

character appears.

2. Enter the country code, area code, and phone

number, then press [ ].

Press [ ] or <Accept> to answer the call.

Tips for answering a call

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

•

When Anykey answer is active, you can press

any key to answer a call, except for [ ] and

Reject>.

When Active folder is active, you can answer a

call by opening the phone. p. 67

ꢀp. 67

2. Scroll to the number you want and press [ ].

•

ꢀ

Making a call from Contacts

•

Press <Reject> or [ ] to reject a call.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Press and hold [ / ] to reject an incoming call

or mute the ringer, depending on the side key

Phonebook.ꢀp. 31

setting.ꢀp. 67

Call functions

Placing a call on hold/Retrieving

Press <Hold> or <Unhold> to place the call on

hold or retrieve the call.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

1. Press <View>.

Making a second call

You can make another call if your network supports

it.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Using the headset

Use the headset to make or answer calls without

holding the phone.

4. Press <Options> and select Drop

→

Drop held

Connect the headset to the jack on the left side of

the phone.

call to end the call on hold.

5. To end the current call, press [ ].

The buttons on the headset work as listed below:

Answering a second call

You can answer an incoming call while already on

the phone, if your network supports it and you have

Press

redial the last call

answer a call

end a call

the button twice.

the button.

activated the call waiting feature.

ꢀp. 70

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <Swap> to switch between the calls.

Options during a call

3. Press <Options> and select Drop

→

Drop held

call to end the call on hold.

You can access a number of functions during a call.

4. To end the current call, press [ ].

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a

call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Transferring a call

Muting or sending key tones

You can transfer the currently active call to a caller

on hold, if your network supports it. With this

option, the two callers can talk to each other, but

you are disconnected from the call.

You can turn the key tones off or on.

Press <Options> and select Mute key tone or

Unmute key tone

To communicate with answering machines or

computerised telephone systems, Unmute key

tone must be selected.

Press <Options> and select Transfer

Using the loudspeaker feature

Use the speaker feature to talk and listen with the

phone a short distance away. Press <Options> and

Using Phonebook

You can access the Contacts menu to locate or

store contacts in Phonebook.

select Loudspeaker or press

ꢀp. 31

Press <Options> and select Contacts

Using a Bluetooth headset

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

Sending a text message

You can create and send a text message to other

people as well as to your current call participants.

and connect it to the phone.ꢀp. 70

Press <Options> and select Send text message

Press <Options> and select Switch to headset

ꢀp. 41

To switch the call back to the phone, press

<Options> and select Switch to phone.

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the

tones used in phones for tone dialling.

Switching off the microphone (Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

You can send DTMF tones as a group after entering

the entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when

you call an automated system, like a banking

service.

Press <Options> and select Mute

To turn the microphone back on, press <Options

and select Unmute

1. When connected with a teleservice system, press

Options> and select Send DTMF

Call functions

2. Enter the number you need to send and press

You can talk privately with that person, while the

other participants converse with each other.

<Send>.

3. To return to the multi-party call, press

Adding a memo

You can add a memo during a call.

Options> and select Join

Dropping one participant

1. Press <Options> and select Drop call

Press <Options> and select Memo

.ꢀp. 59

2. Select a name or number from the participant

list.

Making a multi-party call

Use this feature to allow as many as six people to

join a multi-party call, or conference call.

The participant is dropped from the call, but the

call continues with the other parties.

Your service provider must support multi-party calls

for you to use this feature.

3. Press [ ] to end the multiparty call.

Setting up a multi-party call

1. Call the first participant.

Using the video call feature

In a 3G (UMTS) service area, your phone can make

or receive a video call which allows you to see

another person on the screen during a conversation.

The other person’s phone must support the video

call feature.

2. Call the second participant. The first call is

automatically put on hold.

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

Making a video call

1. In Idle mode, enter the area code and phone

number.

5. Press <Options> and select Join

6. Repeat steps 4 and 5 as desired.

2. Press [ ].

Having a private conversation with one

participant

Answering a video call

When you receive a video call, answer a video call as

receiving a voice call. Press <Show me> to allow

the caller to see you.

1. Press <Options> and select Split

2. Select a name or number from the participant

list.

Using video call options

Menu functions

During a video call, press <Options> to access the

following options:

All menu options listed

•

Loudspeaker

Loudspeaker on or off.

Switch to headset Switch to phone: switch

/Loudspeaker off: turn the

Call log (Menu 1)

•

The Call log menu enables you to view the calls you

have dialled, received, or missed, the length of your

calls, and the cost of your calls.

the call to a Bluetooth headset or back to the

phone.

•

Mute camera: turn off the camera.

To access this menu, press

select Call log

in Idle mode and

Mute voice: turn off the microphone.

Mute camera & voice: turn off the camera and

the microphone.

Missed calls (Menu 1.1)

•

Mute key tone: turn off the key tones.

Zoom: display the zoom control bar.

This menu displays the most recently received calls

that you did not answer.

Brightness: display the brightness control bar.

Effects: change the colour tone of the image.

Accessing a call record

1. Scroll to the name or number you want. The call

list also shows the call repetition.

Hide information/Show information: hide or

display information about the video call.

2. Press [ ] to dial the number, or

details of a call.

to view the

•

Send DTMF: send Dual tone multi-frequency

(DTMF) tones as a group after entering the entire

number you need to send or retrieving a number

from Phonebook.

Using call record options

While viewing the call list, press <Options> to

access the following options:

•

Video quality: change the image quality of the

camera.

•

Details: access information about the selected

call record.

End call: end the video call.

•

Voice call: place a voice call.

Video call: place a video call.

Menu functions

•

Use number: paste the selected number to the

normal dialling screen.

Data calls (Menu 1.6)

Use this menu to view the total amount of sent or

received data.

Save to Contacts: save the selected number in

Phonebook.

To reset a counter or all counters, press <Options

and select Reset or Reset all

Send message: send a message to the selected

number using SMS, MMS, or file messenger.

•

Delete: delete the call record.

Calls cost (Menu 1.7)

Delete all: delete all records.

This network feature displays the cost of calls. This

menu is available only if your USIM/SIM card

supports this feature. Note that this is not intended

to be used for billing purposes.

Dialled calls (Menu 1.2)

This menu displays the most recent calls you have

dialled.

•

Total costs: check the total cost of all your

calls. If the total cost exceeds the maximum cost

set in Edit cost limit, you must reset the

counter before you can make another call.

Received calls (Menu 1.3)

This menu displays the most recent calls you have

received.

•

Last call cost: check the cost of your last call.

Max cost: check the maximum cost set.

Current contacts (Menu 1.4)

Press <Options> to access the following options:

This menu displays all of the contacts you have

dialled, received, or missed.

•

Reset call cost: reset the cost counters.

Edit cost limit: set the maximum cost

authorised for your calls.

Delete all (Menu 1.5)

•

Setup currency: set the price per unit that is

applied when the cost of your call is calculated.

Use this menu to delete all of the records in each call

type.

1. Press

to check the call type(s) to clear.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

Calls time (Menu 1.8)

Search contact (Menu 2.1)

This menu displays the time log for voice and video

calls made and received. The actual time invoiced by

your service provider will vary.

Use this menu to search for numbers in Phonebook.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

•

Total dialled: check the total length of voice

calls dialled.

2. Select the name you want from the list.

Total received: check the total length of

voice calls received.

3. Press [ ] to dial the number, or

contact information.

to edit the

Total dialled: check the total length of video

calls dialled.

Using contact options

Total received: check the total length of

video calls received.

While viewing the contact list, press <Options> to

access the following options:

To reset a counter or all counters, press <Options

•

Details: access the contact information.

Edit: edit the contact information.

Video call: make a video call.

and select Reset or Reset all

Contacts (Menu 2)

New: add a new contact.

Delete: delete the contact.

You can store phone numbers on your USIM/SIM

card and in your phone’s memory. The USIM/SIM

card and phone’s memory are physically separate,

but they are used as a single entity called

Phonebook. In the Contacts menu, you can manage

your Phonebook entries.

Search groups: access the caller group list.

Service number: access service numbers

preset by your service provider.

•

Delete all: delete all contacts.

To access this menu, press

select Contacts

in Idle mode and

Menu functions

While viewing details of a contact, press <Options

to access the following options:

Storing a number in the phone’s memory

1. Select Phone

•

Edit: edit the contact information.

2. Press [Down] and change the settings or enter

information about the contact.

Send message: send a message to the selected

number using SMS, MMS, or file messenger.

•

First name/Last name: assign a name.

Phone number: add a mobile phone

number.

•

Special options: set the following options:

Picture: assign a caller ID image to alert you to

•

Work email : assign a business e-mail

address.

Home email: assign a personal e-mail

address.

Group: assign a caller group.

Homepage: enter a homepage address.

Birthday: enter the person’s birthday.

More information: enter the job title,

department, company, nickname, and

additional note of the person.

a call from the number.

Ring tone: assign a ringer melody to alert you

to a call from the number.

Msg. alert tone: select a melody or tone to

alert you an incoming message from the number.

•

Add to speed dial: set the selected number as

a speed dial number.

•

Video call: make a video call.

Copy to SIM/Copy to phone: copy the number

to the phone’s memory or SIM card or vice

versa.

3. Press <Options> and access the following

options to add additional information:

•

Send name card: send the contact via SMS,

e-mail, file messenger, Bluetooth, or infrared

port.

•

Special options: assign a caller ID image,

call ringer, or message ringer for the contact.

Add phone number: add a number

category to the contact.

Delete phone number: remove the

selected number category from the contact

entry.

Change type: change the number type from

the contact entry.

Mark video call: set the selected number as

a video call number.

•

Use number: paste the selected number to the

normal dialling screen.

Delete: delete the contact.

New contact (Menu 2.2)

•

Use this menu to add a new contact to Phonebook.

4. Press <Options> and select Save

Storing a number on the USIM/SIM card

1. Select SIM

•

Add member: add contacts to the selected

group.

•

Add group: add a new group.

Rename group: change the group name.

Delete group: delete the selected group.

2. Press [Down] and change the settings or enter

information about the contact:

Delete all groups: delete all groups including

default groups.

•

Name: assign a name.

Phone number: enter a phone number.

Email (For USIM): assign an e-mail address.

Group (For USIM): assign a caller group.

Location: assign a location number.

When you are using a USIM card, press

Speed dial (Menu 2.4)

Use this menu to assign speed dial numbers (2 to 9)

to eight of your most frequently called numbers.

Options> and select Add item to enter

Assigning speed dial entries

additional numbers.

1. Select a key location from

9. Key

reserved for your voice mail server.

3. Press to save the contact.

2. Select the contact you want from the contact list.

Groups (Menu 2.3)

3. Scroll to a number, if it has more than one

number.

Use this menu to organise your contacts in caller

groups.

4. Press <Select>.

Managing speed dial entries

While viewing the Speed dial screen, press

Adding members to a caller group

1. Select a group.

<Options> to access the following options:

2. Press

to check the contacts you want.

•

Add: assign a number to an unassigned key.

3. Press <Save>.

•

Details: display details about the speed dial

entry.

Managing caller groups

•

Video call: make a video call.

From the group list, press <Options> to access the

following options:

Change: assign a different number to an

assigned key.

•

View members: display the members of the

selected group.

•

Remove: clear the speed dial setting.

Menu functions

Dialling speed dial entries

Own number (Menu 2.7)

Press and hold the appropriate key in Idle mode.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes

made here do not affect the actual subscriber

numbers on your USIM/SIM card.

My name card (Menu 2.5)

Use this menu to create your name card and send it

to other people.

Service number (Menu 2.8)

Saving your name card

Use this menu to view the list of SDNs assigned by

your service provider, including emergency

numbers, directory enquiries, and voicemail

numbers.

The procedure for creating your name card is the

same as the one for saving a number in the phone’s

memory.ꢀp. 32

1. Scroll to the number you want.

Using name card options

2. Press <Dial> or [ ].

After saving your name card, press <Options> to

access the following options:

Settings (Menu 2.9)

•

Edit: edit the name card.

Use this menu to change the default settings for

Phonebook entries.

Send name card: send the name card via SMS,

e-mail, file messenger, Bluetooth, or infrared

port.

•

Viewing settings: select whether the contact

list is sorted by last name or by first name.

•

Delete: delete the name card.

•

Default storage settings: select a default

memory location to save contacts. If you select

Optionally, the phone will ask you to select a

memory location when saving a number.

Copy all (Menu 2.6)

Use this menu to copy all of the contacts stored on

the USIM/SIM card to the phone’s memory, or vice

versa.

Memory status (Menu 2.0)

Use this menu to view the number of contacts you

have stored and total number of contacts you can

store in Phonebook.

Creating the play list

Applications (Menu 3)

Use this menu to play media files, to record a voice

memo, to set time zone, or to use the phone as a

calculator or converter.

Add the media files to the play list so you can play

them.

1. From the media player screen, press

2. Press <Options> and select Add

3. Select Folder or Files

To access this menu, press

in Idle mode and

select Applications

4. Check the files you want or scroll to the folder

you want.

SAT (Menu 3.1)

This menu is available if you use a SIM card that

supports SIM Application Tool Kit menus and

provides additional services, such as news, weather,

sports, entertainment, and location services.

Available services may vary, depending on your

service provider’s plans.

5. Press <Add> or <Select>.

6. To play files, press

Playing media files

1. From the media player screen, press

2. Select a file. The file plays.

For details, see your USIM/SIM card instructions or

contact your service provider.

During playback, you can use the following keys:

Keys

Function

Media player (Menu 3.2)

Pauses or resumes playback.

Use this menu to enjoy media files, such as video

clips and music files. You can also play streaming

contents.

Left

Goes to the previous file. Moves backward

in a file when held down.

Right

Skips to the next file. Skips forward in a

file when held down.

Downloading or receiving media files

Use this method to save media files to your phone:

Opens the play list.

Adjusts the volume.

Stops playback.

•

Download from the wireless web

Download from a computer using Samsung PC

Studio II Samsung PC Studio II User’s Guide

Receive via IrDA or Bluetooth p. 72, p. 70

ꢀp. 39

ꢀ

Down

•

ꢀ

Copy files to a memory card and insert the card

into the phone

Menu functions

Volume: select a volume level.

Using media player options

Controller: display or hide the control bar of

Media player.

During playback, press <Options> to access the

following options:

Audio player skin: select a skin image.

•

Pause/Resume: pause or resume playback.

•

VOD settings: select a connection profile to be

used for accessing a video streaming server. You

Stop: stop playback.

Send: send the file via MMS, e-mail, file

messenger, Bluetooth, or infrared port. You can

also send the selected file to the online media

album, if provided.

can also make or edit a profile.ꢀp. 73

Key management: manage license keys you

have acquired.

•

Add to play list: add the selected file to the

current play list.

Using play list options

From the Media player screen, press [Up] to access

the play list and press <Options> to access the

following options:

•

Open play list: display the play list.

Activate key: get a new license key when the

key for the selected DRM file expires.

•

Play: play the currently selected file.

•

Reactive key: get another license key even

when the key for the selected DRM file has not

expired.

Add: add files or a folder to the play list.

Remove: remove the selected file or all of the

files from the current play list.

•

Go to File Manager: go to the Videos folder.

•

Move: move the selected file to the position you

want within the current play list or another play

list.

Hidden from Bluetooth: hide the file so that

other bluetooth devices cannot access it.

•

Visible to Bluetooth: share the file with other

Bluetooth devices.

Copy: make a copy of the selected file in the

current play list or another play list.

Show controller/Hide controller: display or

hide the control bar of Media player.

•

Delete list: delete the selected play list.

Rename list: change the name of the play list.

New list: add a new play list.

•

Details: access the file properties.

Player settings: change the default settings for

playing media files.

Play options: select a repeat mode.

Using voice memo options

Voice memo (Menu 3.3)

From the player screen, press <Options> to access

the following options:

Use this menu to record voice memos.

Recording a voice memo

•

Play/Resume: play the voice memo or resume

playback.

1. Press

to start recording.

2. Speak into the microphone.

•

Stop: stop playback.

Record: record a new voice memo.

Press

to pause or resume the recording.

3. When you finish, press <Stop>. The voice

Send: send the voice memo via MMS, e-mail,

file messenger, Bluetooth, or infrared port.

memo is automatically saved.

•

Go to sounds: access the Sounds folder.

Rename: change the name of the voice memo.

Delete: delete the selected voice memo.

Playing a voice memo

1. From the voice recorder screen, press

<Options> and select Go to sounds

Hidden from bluetooth: hide the voice memo

so that other Bluetooth devices cannot access it.

2. Select the Voice memos folder.

3. Select a voice memo. The memo plays.

•

Visible to bluetooth: share the voice memo

with other Bluetooth devices.

On the player screen, you can use the following

keys:

Details: access information about the selected

voice memo.

keys

Function

Record settings: change the default settings

for recording a voice memo.

Starts playback.

Switches to Play mode (

Record mode ( ).

)

or back to

Default name: change the default prefix of the

voice memo.

Left

Right

Moves backward.

Skips forward.

Recording time: select a maximum recording

time.

Adjusts the volume.

stops playback.

Down

Menu functions

Performing a calculation

1. Enter the first number.

World clock (Menu 3.4)

Use this menu to set your local time zone and find

out what time it is in another part of the world.

Press [ ] to include a decimal point.

2. Enter the operation for your calculation by

pressing the Navigation keys.

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home

time zone. As the time line moves, the time and

date of the given zone display.

3. Enter the second number.

4. Press

to view the result.

Using calculator options

2. Press

to save the time zone.

Press <Options> to access the following options:

Viewing and setting a foreign time zone

1. From the world map, press [Down].

•

Equal: view the result.

Recent calculation: display the last result you

calculated.

2. Press [Left] or [Right] to select the foreign time

zone you want to view.

•

Save to memory: save a value into the

calculator memory.

3. Press

to save the time zone.

•

Recall memory: retrieve the saved value.

Applying Daylight Savings Time

1. From the world map, press <Options> and

Clear memory: clear the saved values.

select Summer time

Converter (Menu 3.6)

2. Press to check the time zone(s) you want.

Use this menu for common conversions, such as

currency and temperature.

3. Press <Select>.

4. Press <Options> and select Save

Performing a conversion

Calculator (Menu 3.5)

1. Select the converter type you want.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Use this menu to perform basic arithmetic functions

such as addition, subtraction, multiplication, and

division.

3. Enter the value to be converted.

•

Press [ ] to insert a decimal point.

•

Press [ ] to change the temperature to

above zero (+) or below zero (-).

Navigating the WAP browser

In the WAP browser:

4. Press [Down].

Press

5. Press [Left] or [Right] to select the unit you want

to convert to.

scroll through browser items

select a browser item

return to the previous page

[Up] or [Down].

The equivalent value for the amount you entered

displays.

<Back>.

Using converter options

Press <Options> to access the following options:

Using browser menu options

•

Clear: clear the current values.

From any WAP page, press <Options> to access

the following browser options:

Reverse: reverse the conversion.

•

Go to homepage: go back to the homepage.

Currency rates: display the currency rate list.

Enter URL: manually enter the URL address of

the web page you want to access.

Internet (Menu 4)

•

Reload: reload the current page with updated

information.

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-the-

minute information and a wide variety of media

contents, such as wallpapers, ring tones, and music

files.

Add favorite: add the current page to your

bookmark list.

•

Favorites: access the bookmark list.

History: show URLs previously visited.

Send Link: send the URL via SMS, e-mail, or file

messenger.

To access this menu, press

select Internet

in Idle mode and

•

Save: save the image of the current WAP page

or the current page.

Go to homepage (Menu 4.1)

You can launch the WAP browser and access the

homepage of the WAP service provided by your

service provider.

Menu functions

•

Advanced: clear browser information and

access the browser settings.

Adding a new bookmark

1. Press <New> and select Favorite

Search text: search for a specific word or

phrase from the current WAP page.

Clear history: delete the URLs stored in the

history.

If the phone has any bookmark, press

Options> and select New Favorite

2. Enter a URL and press

3. Enter a name for the item and press <OK>.

4. Press to save the item.

→

Clear cookies: delete cookies.

Clear cache: delete information stored in the

cache.

Using boomark options

From the bookmark list, press <Options> to access

the following options:

Details: access information about the current

page.

•

Open: open the selected bookmark folder.

Browser settings: change the settings for

multimedia, browser display, security, and

certificates.

Select: access the page of the selected

bookmark.

Network settings: select a connection profile

to be used for connecting to the Internet. You

•

Details: access the details of the bookmark.

Send link: send the bookmark via SMS, e-mail,

or file messenger.

can also make or edit a profile.ꢀp. 73

About...: access the properties of the WAP

browser.

•

New: add a new bookmark or folder.

Rename: rename the folder name.

Edit: edit the selected bookmark.

Exiting the WAP browser

Press [ ] to exit the browser.

Move: move the bookmark to another folder.

Enter URL (Menu 4.2)

Delete: delete the selected bookmark or all

bookmarks.

You can enter a URL of a WAP page in order to

quickly access the page.

History (Menu 4.4)

Favorites (Menu 4.3)

You can access the list of pages you have accessed

recently.

You can add and manage the URLs of the WAP pages

you frequently access as bookmarked items. You can

also manage URLs you have bookmarked while

navigating the Internet.

Browser settings (Menu 4.5)

Use this menu to change the settings for browser

display, security, and certificates.

1. Enter your message.

Network settings (Menu 4.6)

Press <Options> and select Insert to retrieve a

text template, contact entry, or bookmark.

Use this menu to select a connection profile to be

used for connecting to the Internet. You can also

2. Press

make or edit a profile.ꢀp. 73

3. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

Messages (Menu 5)

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use WAP push message, Voice mail, and

Cell broadcast message features.

4. Press

to send the message.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers

messages containing a combination of text, image,

video, and audio, from phone to phone or from

phone to e-mail.

To access this menu, press

select Messages or press <Msg.> in Idle mode.

in Idle mode and

Create new (Menu 5.1)

1. Enter the message subject.

Use this menu to create and send text messages,

multimedia messages, or e-mails. You can also send

files using MMS.

2. Select the Text line.

3. Enter the message text and press

4. Select the Picture or Audio line.

Text message (Menu 5.1.1)

5. Select an image or audio file and press <Add>.

Short Message Service (SMS) allows you to send or

receive text messages.

The maximum size allowed for an MMS

message can differ depending on the country.

If you cannot attach another file, add a new

page.

The maximum number of characters allowed in a

short message varies by your service provider. If

your message exceeds the maximum number of

characters, the phone will split the message.

Menu functions

6. Press <Options> to access the following

File messenger (Menu 5.1.3)

options:

Use this menu to send multiple media files by

attaching them to an MMS message.

•

Preview: display the message you created.

Edit text Change file: edit the added text,

picture, or sound clip.

Delete text Delete file: delete the added

text, picture, or sound clip.

Save to Drafts: save the message in the

Drafts box.

Add page: add a page. Move to each page

by pressing [Left] or [Right] on the message

screen.

1. Enter a subject in the Subject line.

2. Move to the Message field and enter the

•

message text.

3. Select the Attach files line.

4. Scroll to a media file folder and press

check files.

5. Press <Options> and select Attach

6. Press <Options> to access the following

options:

•

Move page: move the current page to the

next or previous page.

•

Attached file list: display the file list you

attached.

•

Delete page: delete the added page.

Edit style: change the page profile.

•

Add name card: add a contact as a Vcard

format.

This page: set the page duration and

change font colour and style for the

selected page.

•

Add v-calendar: add a calendar memo.

Delete all attachments: delete all attached

files.

All page: change the background colour

and page layout.

•

Save to Drafts: save message in the Drafts

box.

•

Save as template: save the message as a

template in the Multimedia templates

folder.

7. When you have finished, press

8. Enter a phone number or e-mail address.

7. When you have finished, press

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

8. Enter a phone number or e-mail address.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

9. Press

to send the message.

9. Press

to send the message.

Email (Menu 5.1.4)

Inbox (Menu 5.2)

You can send and receive e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your

This folder stores all types of messages you have

received, except for e-mails. MMS, SMS, voicemail,

WAP push messages from the WAP server, and

configuration messages are stored here.

e-mail account.ꢀp. 51

1. Enter the e-mail subject.

Configuration messages, which are sent from your

service provider, contain network parameters to let

you easily apply network settings to your phone.

2. Move to the Message field and enter the

message text.

3. Select the Attach files line.

Viewing a message at the time of its receipt

4. Scroll to a media file folder and press

check files.

When a message has been received, the phone

alerts you by:

5. Press <Options> and select Attach

•

Displaying a message icon and text notification

6. Press <Options> to access the following

Sounding or vibrating, depending on the

message alert setting

options:

•

Attached file list: display the file list you

attached.

To read a message immediately, press <View> and

select a message from the Inbox. To read it later,

press <Exit>.

•

Add name card: add a contact as a Vcard

format.

For an MMS message, press <Options> and select

Retrieve. The message is downloaded from the

MMS server to the phone’s memory.

•

Add v-calendar: add a calendar memo.

Delete all attachments: delete all attached

files.

•

Save to Drafts: save message in the Drafts

box.

Viewing a message in Inbox

On the message list, the following icons are

available, depending on the message type:

7. When you have finished, press

8. Enter an e-mail address.

•

SMS

•

MMS

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

MMS notification

WAP push

Configuration

USIM/SIM

9. Press

to send the e-mail.

Menu functions

SMS messages

• Depending on the DRM (Digital Rights

•

Reply: reply to the sender.

Management), you may not be able to forward

some messages. They are indicated by the

icon.

Forward: forward the message.

Call back: dial the phone number of the sender.

• An

icon shows that a message was sent with

Save to Contacts: extract phone numbers or

e-mail addresses from the message and save

them in Phonebook.

high priority. A grey icon means that the

message is of low priority.

While viewing the message list, press <Options> to

access the following options:

•

Move to SIM/Move to phone: move the

message between the phone’s memory and the

USIM/SIM card.

•

View: display the message. For MMS

notifications, you can access the message

properties.

Delete: delete the message.

MMS messages

•

Reply: send a reply to the sender.

•

Play: play the message.

Reply to all: send a reply to the sender and all

recipients.

Call Go to URL Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

•

Forward: forward the message to other people.

Install: apply the configuration value in the

message to the phone.

•

Add to bookmarks: save the highlighted web

link to the bookmark list.

•

Sort by: change the sort order in the message

list.

Create email: send an e-mail to the highlighted

e-mail address.

Retrieve: retrieve the MMS message from the

server.

Create multimedia message: send an MMS

message to the highlighted e-mail address.

•

Reject: reject the MMS message.

Delete: delete the message.

•

Reply: send a reply to the sender.

Reply to all: send a reply to the sender and all

recipients.

Delete all: delete all messages.

Details: access the message properties.

•

Forward: forward the message to another

person.

Using message options

Send to Album: send the message to the online

media album, if provided.

While viewing a message, press <Options> to

access the following options:

Call back: dial the phone number of the contact.

•

Save as template: save the message as a

template in the Multimedia templates folder.

•

Send: send the selected message.

Sort by: change the sort order of the list.

Delete: delete the selected message.

Delete all: delete all messages.

Save files: save media items from the message

into your phone’s memory or the memory card.

Save to Contacts: extract phone numbers or

e-mail addresses from the message and save

them in Phonebook.

Outbox (Menu 5.4)

This folder stores messages you have tried to send

or have being sent.

•

Delete: delete the message.

Details: access the message properties.

The following icons on the message icons indicates

the sending status:

WAP push messages

•

Go to URL/Go to RTSP: connect to the URL

specified in the message.

Delete: delete the message.

•

indicates the message is being sent.

indicates the message is failed to send.

•

On the message list, press <Options> to access the

following options:

Configuration message

•

Install: apply the configuration value in the

message to the phone.

Delete: delete the message.

•

View: display the selected message.

Send again: resend the message.

Edit: edit the selected message.

•

Delivery report messages

•

Save contact to: extract URLs, e-mail

addresses, or phone numbers from the message.

Delete: delete the message.

Cancel sending: cancel sending the message.

Sort by: change the sort order of the list.

Delete: delete the message.

•

Delete all: delete all messages.

Drafts (Menu 5.3)

Details: access the message properties.

This folder stores messages you have saved to send

them at a later time while creating the message.

Sent box (Menu 5.5)

On the message list, press <Options> to access the

following options:

This folder stores messages that you have sent

successfully.

•

View: open the selected message.

On the message list, press <Options> to access the

following options:

Edit: edit the selected message.

Menu functions

•

View: display the selected message.

3. Select an e-mail or header.

Forward: forward the message to other people.

Sort by: change the sort order of the list.

Delete: delete the message.

4. If the e-mail has more than one page, press

[ / ] to scroll through pages one by one.

5. Select an attached file to view or play it.

Delete all: delete all messages.

Using e-mail options

Details: access the message properties.

While viewing the e-mail list or an e-mail, press

Options> to access the following options:

Email inbox (Menu 5.6)

•

View: open the selected e-mail.

This folder stores e-mails that you have received.

•

Retrieve: retrieve the body of the selected

e-mail header from the e-mail server.

Viewing received e-mails

1. From the e-mail folder, press <Options>.

•

Reply: send a reply to the sender.

Reply to all: send a reply to the sender and all

recipients.

2. Select Download to get new e-mails from your

server.

•

Forward: forward the e-mail.

The phone checks for new e-mails and retrieve

received e-mails. The icons tell you the status of

each e-mail:

Download: retrieve new e-mails or headers

from the e-mail server.

•

Sort by: change the sort order of the list.

•

: Retrieved e-mail

: Retrieved e-mail with attachments.

: E-mail not retrieved

Save files: save the files attached to the e-mail

in the phone’s memory or on the memory card.

•

Save to Contacts: extract phone numbers or

e-mail addresses from the e-mail and save them

in Phonebook.

• Depending on the DRM (Digital Rights

Management), you may not be able to

forward some messages. They are

•

Block: add the sender’s e-mail address or e-mail

subject to the Block list.

indicated by the

icon.

• An icon shows that an e-mail was sent

Delete from phone: delete the selected e-mail

or all e-mails from the phone’s memory.

with high priority. A grey icon means that

the e-mail is of low priority.

•

Delete permanently: delete the selected e-

mail or all e-mails from both the phone’s

memory and the e-mail server.

Multimedia templates (Menu 5.8.2)

When you access this menu, you can view the list of

templates you have saved.

•

Email accounts: change the active e-mail

account.

From the template list, press <Options> to access

the following options:

Details: access the e-mail properties.

•

View: open the template.

Send: send the template as a message.

New: add a new template.

Media Album (Menu 5.7)

Use this menu to access the Media Album service,

with which you can organise your own online media

album, adding media content and messages via the

wireless web. This menu is only available if

supported by your service provider.

Edit: change the selected template.

Delete: delete the template.

Delete all: delete all templates.

Broadcast (Menu 5.9)

Templates (Menu 5.8)

Your phone receives Cell Broadcast (CB) messages,

which are text messages related to various topics,

such as weather forecast, traffic, and news report,

from networks. Use this menu to access received CB

messages.

Use this menu to create, edit, and send text

templates and MMS templates.

Text templates (Menu 5.8.1)

Use this menu to preset frequently used messages.

Press <New> to create a new text template.

Viewing a CB message

All CB messages are stored in the Temporary folder

and will be deleted after a period of time. If you

don’t want a message to be deleted, save it to the

Archive folder. While viewing the message, press

From the text template list, press <Options> to

access the following options:

•

Edit: change the selected template.

Send: send the template as an SMS, MMS, file

<Options> and select <Save>.

messenger, or e-mail.

•

New: add a new template.

Delete: delete the template.

Delete all: delete all templates.

Menu functions

Using message options

Settings (Menu 5.

)

On the message list, press <Options> to access the

following options:

Use this menu to set up various options for using

messaging service.

•

View: open the selected message.

Delete: delete the selected message.

Delete all: delete all messages.

Text message (Menu 5. .1)

You can configure default SMS settings.

•

Settings x: set the following properties in a

profile:

While viewing a message, press <Options> to

access the following options:

Centre address: store or change the number of

your message centre.

•

Save: save the message in the Archive folder.

Delete: delete the message.

Expiration: set the length of time your

messages are stored in the SMS centre.

You can highlight text and, depending on the

contents, you have the following additional options:

Default type: set the default message type. The

network can convert messages into the selected

format.

•

Call: place a call to a phone number.

Go to URL: go to a selected URL.

Name: enter a profile name.

Go to RTSP: connect to a streaming server

specified in the RTSP (Real Time Streaming

Protocol).

•

Sending settings: set up the following options

for sending an SMS message:

•

Create email: create an e-mail.

Reply path: allow the recipient to reply to you

through your SMS centre.

Delete all (Menu 5.0)

Delivery report: set the network to inform you

when your message has been delivered.

Use this menu to delete all of the messages in each

message folder at once.

Network selection: select a preferred data

transmission method, either GSM (CS) or GPRS

(PS) network.

1. Press

want.

to check the message boxe(s) you

Keep a copy: leave the copies of your messages

in the Sent box folder after sending.

2. Press <Delete all>.

3. Press <Yes> to confirm the deleting.

Character support: select a character encoding

type. If you select Automatic, the phone

switches the encoding type from GSM-alphabet

to Unicode if you enter a unicode character. Use

of unicode encoding will reduce the maximum of

number in a message to about half. If this menu

is not shown, your phone provides the Automatic

encoding by default.

Add signature: edit and attach your signature

to messages via the file messenger.

•

Receiving options: set up the following options

for receiving MMS messages:

Home network: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Roaming network: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Multimedia message (Menu 5. .2)

You can configure default MMS settings.

Home reception and Roaming reception have the

following options:

•

Sending options: set up the following options

for sending MMS messages:

Auto download: the phone automatically

retrieves messages from the server.

Priority: set the priority level of your messages.

Expiration: set the length of time your

messages are stored in the MMS centre.

Manual: the phone receives notifications first

from the server. Use the Retrieve option to

manually download new messages.

Delivery: set a time delay before messages are

sent.

Restricted: the phone receives notifications

first from the server. When you attempt to

download new messages, the phone informs

you of additional charges.

Hide address: set your address to be hidden

from the recipient’s phone.

Request delivery report: set the network to

inform you when your message has been

delivered.

Reject: the phone rejects all messages.

Send delivery report: set the network to send

a delivery report to sender.

Request read report: request a report from

each recipient as to when your message was

read by the recipient.

Send read report: determine whether or not

the phone sends a read-report to a sender.

Keep a copy: leave the copies of your messages

in the Sent box folder after sending.

Reject anonymous: reject messages from

anonymous senders.

Add my name card: allow your contact

information to be attached to your messages via

the file messenger.

Reject advertisement: reject advertisements.

Menu functions

•

MMS profiles: select a connection profile to be

used for MMS. You can also make or edit a

profile. p. 73

Delivery report: set the network to inform you

when your e-mail has been delivered.

ꢀ

Add my name card: allow your contact

information to be attached to e-mails.

Message size: select the maximum file size of

MMS attachment. This file size may vary,

depending on your country.

Add signature: attach your signature to

e-mails.

Creation mode: select an MMS creation mode.

Input signature: edit your signature.

Restricted: you are not able to create and send

messages using unsupported file formats.

•

Receiving options: set up the following options

for receiving an e-mail:

Warning: the phone informs you when you

create and send a message using unsupported

file formats.

Set download limit: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Free: you can create and send messages using

unsupported file formats.

Auto polling: set the phone to automatically

check the e-mail server to download e-mails at

the specified intervals.

•

Slide interval: select the length of time the

display shows each page in a message.

Polling frequency: set how often the phone

checks the e-mail server for automatic polling.

Email (Menu 5. .3)

Block address: specify e-mail addresses to

reject e-mails from those addresses.

You can configure default e-mail settings.

•

Sending options: set up the following options

for sending an e-mail:

Block subject: specify subjects to reject e-mails

which contain those subjects.

From: set the sender name.

•

Email profiles: select a network connection

profile to be used for sending and receiving

e-mails. You can also make or edit a profile.

Sending account: select the default account.

Priority: change the priority level of your

e-mails.

ꢀ

p. 73

You cannot change e-mail profile settings

while an e-mail is being sent or retrieved.

Keep a copy: leave the copies of your e-mails in

the Sent box folder after sending.

Include body when replying: set whether or

not the phone includes the original e-mail text in

a reply.

•

Email accounts: select an account to be used

and set up e-mail accounts. Press <Options

Use SMTP Authentication: activate the SMTP

authentication.

and select Edit to access the following options:

Same as POP3/IMAP4: select if you want the

Account name: enter a name for the currently

selected account.

SMTP server to have the same parameters as the

POP3 or IMAP4 server.

SMTP server: enter the IP address or domain

User name: enter the SMTP user name.

name of the outgoing e-mail server.

Password: set the SMTP password.

SMTP port: enter the SMTP port number.

Voice mail (Menu 5. .4)

Retrieving server type: select the protocol for

the incoming e-mail server. The remaining

options depend on the protocol type setting.

You can change the number of the voicemail centre.

Push message (Menu 5. .5)

POP3 server/IMAP4 server: enter the IP

address or domain name of the POP3 or IMP4

server.

You can determine whether or not your phone

receives push messages.

Broadcast (Menu 5. .6)

POP3 port/IMAP4 port: enter the POP3 or

IMAP4 port number.

Use this menu to change the settings for the

broadcast message service.

IMAP4 retrieving option: (only for IMAP

protocol): set whether the phone retrieves only

new messages or all messages.

•

Receive: enable or disable the reception of

broadcast messages.

Retrieving option: set which part of e-mails

the phone retrieves from the server.

•

Channel: specify the channels from which you

receive broadcast messages.

Keep in server: leave the copies of e-mails in

the server after retrieving.

When you select Respective channels, you can

set up a list of active CB channels.

My Address: set your e-mail address.

•

Language: select the language in which

broadcast messages display.

User name: set the user name for POP3 or

IMAP4 server connections.

Password: set the password for POP3 or IMAP4

server connections.

Menu functions

3. Press [Left] or [Right] to scroll to other images.

Memory status (Menu 5.

)

Editing an image

1. Select a photo.

Use this menu to view the memory status for SMS,

MMS, e-mail, and push messages.

2. Press <Options> and select Edit

File manager (Menu 6)

The File manager menu allows you to access

images, videos, ringtones, sounds, and other files

stored in the phone’s memory or the memory card.

3. Change the photo using the following editing

options:

•

Resize: change the image size.

Effects: change the colour tone or apply a

special effect to the photo.

To access this menu, press

select File manager

in Idle mode and

•

Adjust: adjust the image brightness,

contrast, or colour balance.

•

As a result of the DRM (Digital Rights

Management) system, some of the media

items you download from the Internet or

receive by MMS may require a license key to

access them or forward them to other people.

You can acquire the key from the web site

which owns the rights to the content; use the

Activate key option in the item options.

•

Frames: apply a decorative frame.

Cliparts: add an image clip to the photo.

Insert text: add text to the photo.

Rotate: rotate the photo clockwise or

counterclockwise.

Flip: flip the photo vertically or horizontally.

Crop: select a variously sized and shaped

section of the photo.

•

• Your service provider supports only count-

based or unlimited access DRM files.

4. When you have finished, press

Images

5. Enter a photo name and press <Save>

This menu displays default wallpapers, photos you

have taken, and images downloaded or received in

messages. You can also edit a photo using various

editing options.

Using image options

While viewing a file, press <Options> to access the

following options:

•

Send: send the selected file via MMS, e-mail, file

messenger, Bluetooth, or infrared port. You can

also send the file to the online media album, if

provided.

Viewing an image

1. Press [Left] or [Right] to scroll to an image

folder.

2. Select an image.

•

Hidden from bluetooth: hide the file so that

other Bluetooth devices cannot access it.

•

Set as: set the image as your wallpaper for the

main display or external display, or as a caller ID

image for a Phonebook entry.

Visible to bluetooth: share the file with other

Bluetooth devices.

•

Move: move the file to another folder.

Set as: set the image as your wallpaper for the

main display or external display, or a caller ID

image for a Phonebook entry.

Copy: copy the file to another folder.

Delete: delete the file or all of the files stored in

the folder.

•

Move: move the file to another folder.

•

Rename: change the name of the file.

Copy: copy the file to another folder.

Lock/Unlock: lock the file to prevent from being

deleted, or unlock the file.

Real size: show the image in real size or display

size.

•

New folder: add a new folder.

Details: access the file properties.

Memory status: access the memory

•

Slide show: set all images to display as a slide

show.

Edit: edit the image and save it as a different

file.

information for each folder in File manager

Downloading images

1. Press [Left] or [Right] to scroll to Downloads

•

Delete: delete the file.

Rename: change the name of the file.

Details: access the file properties.

2. Select More pictures. You are connected to a

preset website.

While viewing the file list, press <Options> to

access the following options:

3. Search for an image and follow the onscreen

instructions to download it.

•

View: open the selected file.

Send: send the selected file via MMS, e-mail, file

messenger, Bluetooth, or infrared port. You can

also send the image to the online media album,

if provided.

Videos

This menu displays video clips you have recorded,

downloaded, or received in messages.

Playing a video clip

1. Press [Left] or [Right] to scroll to a video folder.

2. Select a video clip.

•

Hidden from bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Visible to bluetooth: share the file with other

Bluetooth devices.

Menu functions

During playback, use the following keys:

•

Reactive key: get another license key even

when the key for the selected DRM file has not

expired.

Keys

Description

Pauses or resumes playback.

Opens the play list.

•

Hidden from bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Visible to bluetooth: share the file with other

Bluetooth devices.

Left

Goes to the previous file. Moves

backward in a file when held down.

Show controller/Hide controller: show or

hide the control bar of Media player.

Right

Skips to the next file. Skips forward in

a file when held down.

•

Details: access the file properties.

Adjusts the volume.

Stops playback.

Player settings: change the default settings for

playing files.

Down

Play options: select a repeat mode.

Volume: select a volume level.

Using video options

Controller: show or hide the control bar of

Media player.

During playback, press <Options> to access the

following options:

Audio player skin: select a skin image.

•

Pause/Resume: pause or resume playback.

•

VOD settings: activate a connection profile to

be used for accessing a streaming server. You

Stop: stop playback.

Send: send the selected file via MMS, e-mail, file

messenger, Bluetooth, or infrared port. You can

also send the file to the online media album, if

provided.

can also make or edit a profile.ꢀp. 73

Key management: manage license keys you

have acquired.

•

Add to play list: add the selected file to the

play list.

Downloading video clips

1. Press [Left] or [Right] to scroll to Downloads

•

Open play list: open the play list.

2. Select More videos

Activate key: get a new license key when the

key for the selected DRM file expires.

3. Search for a video clip and follow the onscreen

instructions to download it.

•

Add to play list: add the current file to the play

list.

Music

This menu displays AAC or MP3 music files you have

downloaded or received in messages.

•

Open play list: open the play list.

Go to the File Manager: go to the Music

folder.

Playing a music file

Select a music file. The selected music file plays.

During playback, use the following keys:

•

Activate key: get a new license key when the

key for the selected DRM file expires.

Reactive key: get another license key even

when the key for the selected DRM file has not

expired.

Keys

Description

Pauses or resumes.

Opens the play list.

•

Hidden from bluetooth: hide the file so that

other Bluetooth devices cannot access it.

Left

Goes back to the previous file. Moves

backward in a file when held down.

Visible to bluetooth: share the file with other

Bluetooth devices.

Right

Skips to the next file. Skips forward in a

file when held down.

•

Details: access the file properties.

Player settings: change the default settings for

playing files.

Adjusts the volume.

Stops playback.

Play options: select a repeat mode.

Volume: select a volume level.

Down

Audio player skin: select a skin image.

Using music file options

•

VOD settings: activate a connection profile to

be used for accessing a streaming server. You

While playing a music file, press <Options> to

access the following options:

can also make or edit a profile.ꢀp. 73

•

Pause/Resume: pause or resume playback.

Key management: manage license keys you

have acquired.

Stop: stop playback.

Send: send the selected file via MMS, e-mail, file

messenger, Bluetooth, or infrared port. You can

also send the file to the online media album, if

provided.

Downloading music file

1. Select More music

2. Search for a music file and follow the onscreen

instructions to download it.

Menu functions

•

Set as ringtone: set the sound clip as your call

ringer.

Sounds

This menu displays the default ringtones and sound

files you have downloaded or received in messages.

You can also access voice memos you have

recorded.

Set as caller ID: set the sound clip as a caller

ID ringer.

Details: access the file properties.

Playing a sound clip

1. Press [Left] or [Right] to scroll to a sound folder.

Games & More

Use this menu to download Java games and play

them.

To access voice memos, scroll to the Voice

memos folder.ꢀp. 37

Playing Powerinlinex

1. From the Games & More menu, select

2. Select a sound clip. The sound is played.

During playback, you can use the following keys:

Powerinlinex

Keys

Description

2. Press any key, except for [ ].

3. Select PLAY or press <PLAY>.

4. Select a character.

Up/Down/

Adjusts the volume.

Left

Goes to the previous file.

Skips to the next file.

5. Press <OK> to start a game.

6. Press [Up] to make the character move forward.

Right

7. Press the Navigation keys to change the

direction.

Allows you to send the selected file to

other people.

During a game, press <Options> to access game

options.

Using sound options

During playback, press <Options> to access the

following options:

Playing TheLastAge

1. From the Games & More menu, select

•

Send: send the selected file via MMS, e-mail, file

messenger, Bluetooth, or infrared port.

TheLastAge

2. Press any key, except for [ ].

•

Delete: delete the file.

3. Select START GAME or press <PLAY>.

Rename: change the name of the file.

4. Select New Game or Load Game

5. Press <OK>.

Downloading new games

1. Select More games

6. Press <SKIP> and then <OK>.

7. Press [Up] to make the character move forward.

2. Search for a game and follow the onscreen

instructions to download it.

8. Press the Navigation keys to change the

direction.

Other files

During a game, press <Options> to access game

Files that you have received but which are not

supported by your phone are stored in this folder.

You cannot open these files on the phone.

Unsupported file formats include *.doc, *.ppt, *.txt,

and so on.

options.

Using Java game options

While viewing the game list, press <Options> to

access the following options:

•

Play: launch the selected game.

Memory card

Move: move to the selected game to another

folder.

Use this menu to access the media files stored on

the memory card. This option is only available when

you insert the memory card into the phone.

•

Delete: delete the selected game or all games.

Delete folder: delete the selected game folder.

For details about using files, see the corresponding

menu.

Rename: change the name of the downloaded

game or added game folder.

•

Lock/Unlock: lock the game to prevent it from

being deleted, moved, and renamed, or unlock

the game.

Organiser (Menu 7)

The Organiser feature enables you to create and

manage your schedule, anniversaries, tasks, and

memos. You can also set alarms.

•

Details: access the game properties.

New folder: add a new game folder.

To access this menu, press

select Organiser

in Idle mode and

Network settings: activate a connection profile

to be used for accessing a Java server. You can

also make or edit a profile.ꢀp. 73

Menu functions

Alarm (Menu 7.1)

Calendar (Menu 7.2)

Use this menu to set alarms to ring at specific times.

The alert type for a normal alarm corresponds to the

call alert type settings in the currently selected

profile. A wake-up alarm does not be affected by

your profile setting.

Use this menu to keep track of your monthly

schedule.

Consulting the calendar

When you open the calendar, today’s date is marked

with a blue box. Scroll to the date you want. You can

move to the next or previous month by pressing

[ / ].

Setting an alarm

1. Select the type of alarm.

2. Scroll to On on the Alarm line and press

Press <Options> to access the following options:

[Down].

•

View: display the stored events for that date.

3. Enter the time for the alarm to sound and press

[Down].

New: add a new event, anniversary, task, or

memo. You can schedule up to 100 schedule

items, 50 anniversaries, 20 tasks, and 20

memos on the calendar, and schedule more than

one event per day.

4. Set the repeat option from the Repeat line.

5. Select the Alert tone line.

6. Select an alarm melody.

•

Week view: display the week view screen.

Go to today: display the current date.

Go to date: display a specific date.

7. Press <Options> and select Save

Stopping an alarm

When the alarm sounds, choose either of the

following options to stop the alarm:

Starting date: set whether the calendar starts

with Sunday or Monday.

•

Press <OK> to confirm the alarm.

•

Delete: delete the events for the specific period.

Press <Snooze> to stop the wake-up alarm for

5 minutes. You can do this a maximum of 5

times.

Delete all: delete all of the events in the

calendar.

Entering a new schedule item

1. Select a date on the calendar.

2. Press <Options> and select New

Deactivating an alarm

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

→

Schedule.

3. Press <Options> and select Save

3. Press [Down] and enter information or change

the settings in the following entry fields:

•

Alarm: select to set an alarm for the

anniversary. You can set the number of days

before the event date and the time for the

alarm to sound.

Repeat every year: select to set the phone

to remind you of the anniversary every year.

•

Title: enter the title of the event.

Details: enter the event details.

Start and End: enter the starting and ending

times for the event.

4. Press <Options> and select Save

•

Start date and End date: enter the starting

and ending dates for the event.

Location: enter information about the event

location.

Alarm: select to set an alarm for the event

and set the time for the alarm.

Repeat: select to set the event to recur. You

can select a repeat unit and set the date to

end repeating.

Entering a task

1. Select a date on the calendar.

2. Press <Options> and select New

→

Task.

3. Press [Down] and enter information or change

the settings in the following entry fields:

•

Title: enter the title for the task.

Task: enter the task content.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

•

Expiry: set when the event will be deleted

from the calendar.

4. Press <Options> and select Save to save the

event.

4. Press <Options> and select Save

Entering a new anniversary

1. Select a date on the calendar.

Entering a memo

1. Press <Options> and select New

→

Memo.

2. Press <Options> and select New

Anniversary

→

2. Enter the memo text and press [Down].

3. Enter the date.

3. Press [Down] and enter information or change

the settings in the following entry fields:

4. Press <Options> and select Save

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Menu functions

•

Send schedule/Send task: send the event via

SMS, e-mail, file messenger, Bluetooth, or

infrared port.

Viewing an event

Square brackets on a calendar date indicate the type

of events scheduled for that day:

Send memo: send the memo via SMS.

•

Green: schedule

Blue: task

•

Red: anniversary

Orange: memo

Week view (Menu 7.3)

1. Select a date on the calendar to display the

events for that day. The list of events displays.

Use this menu to view events for the selected week.

The current date is marked in blue. Square brackets

on a calendar date indicate the types of events

scheduled for that day.

The following icons indicate the type of event:

•

Scheduled events

Tasks

•

Anniversaries

Memos

1. Scroll up to the date line and press [Left] or

[Right] to access another week.

2. Select an event to view its details.

2. Select the time cell that contains the event you

want.

Using event options

From the event list, press <Options> to access the

following options:

Today’s events (Menu 7.4)

Use this menu to view events for the selected date.

•

View: access the selected event.

Select an event to view its details. The event opens

in Edit mode.

New: add a new event.

Completed/To do: change the status of the

selected task.

Schedule (Menu 7.5)

•

Month view: switch to the month view screen.

Week view: switch to the week view screen.

This menu displays the scheduled events. If you

have set the Repeat and Alarm options, the

and

Change date

change the date of the event.

Delete: delete the selected event.

/Change due date/Reschedule:

icons display.

Select a schedule item to view its details.

•

Delete all: delete all of the events for the

selected day.

2. Select an event.

Anniversary (Menu 7.6)

3. Press <Confirm> to confirm and delete the

This menu displays anniversaries you have created.

If you have set the Repeat and Alarm options, the

event.

and

icons display.

Using missed alarm options

Select an anniversary item to view its details.

From the event list, press <Options> to access the

following options:

Task (Menu 7.7)

•

View: display the missed event.

Delete: delete the missed event.

Delete all: delete all missed events.

Use this menu to display tasks you have created.

The icons on the right indicate the importance; the

lower the number on the icon, the higher the

priority. A check mark appears in the status check

box if the task has been completed.

Memory status (Menu 7.0)

This menu displays the number of events of each

type you have created, and the total number of

events you can store.

Select a task to view its details.

Memo (Menu 7.8)

This menu displays memos you have created.

Select a memo to view its details.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos. Using the

Camera menu, you can turn on the camera.

Missed event alarm (Menu 7.9)

When you are unable to acknowledge an alarm for a

scheduled event or anniversary, the phone displays

a missed alarm notification.

To access this menu, press

select Camera

in Idle mode and

•

Press <View> to view the corresponding event.

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras

are not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

Press <Exit>.

Viewing a missed event alarm

1. From the Organiser menu, select Missed event

alarm

Menu functions

Using camera options in Capture mode

Taking a photo

In Capture mode, press <Options> to access the

following options:

The camera will produce JPEG photos.

When you take a photo in direct sunlight or in

bright conditions, shadows may appear on the

photo.

•

Take photo: take a photo.

Record video: switch to Record mode.

Switch camera: switch between the interior

lens and the exterior lens.

1. To turn on the camera, access the Camera menu

or press and hold [ ].

•

Go to photos: display the photos stored in the

2. Press [ ] to switch between the interior lens

below the display and the exterior lens on the

external of the phone.

Pictures folder.ꢀp. 52

Shooting mode: take a photo in the following

modes:

3. Adjust the image by aiming the lens at the

subject.

Single shot: take a photo in the normal mode.

Multi shot: take several action stills. You can

select the number of still images the camera will.

•

Press <Options> to use the camera options.

See the next section.

Mosaic shot: take several stills and save them

in one frame. You can select the layout.

•

Use the keypad to change the camera

settings or switch to other modes.

4. Press to take a photo. The photo is saved in

the Pictures folder.

ꢀp. 63

•

Effects: change the colour tone of the image.

Frames: apply a decorative frame.

Hold the phone still for one or two seconds

after pressing the camera shutter key to allow

the image data to process.

Timer: set a time delay before the camera takes

a photo.

•

Zoom: display the zoom control bar.

Brightness: display the brightness control bar.

5. To

use photo options

Press

Camera settings: change the default settings

for taking a photo.

<Options>.

ꢀp. 64

Default name: change the default prefix of the

file name.

delete the photo

Delete> or [C

return to Capture mode

Default storage: select a memory location to

store photos.

Viewfinder: select a preview mode, either Full

Screen mode or Normal mode with actual ratio.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

Shutter sound: select a camera shutter sound.

Capture quality: select an image quality.

Image size: select an image size.

Key

Function

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Multi shot speed: select the shutter speed

between each shot in Multi Shot mode.

Left/

Right

Spot metering: adjust the exposure based on a

specific area of the image. Select On to display

the spot focus frame in the middle of the image,

and change the exposure according to the

Up/

Zooms in or out.

Down

brightness of the image fragment in the frame.

Switches to Record mode.

ꢀp. 64

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light

situations, lower the ISO number to increase the

quality.

Changes the image size.

Changes the image quality.

Changes the shooting mode and the

number of photos for multi shots.

The higher the ISO number, the faster the

camera shutter functions and the more sensitive

the camera is to light. Higher ISO settings may

bring some distortion to an image.

Changes the colour tone of the image.

Adds a decorative frame.

Sets the timer.

White balance: adjust the colour balance of the

photo. You can make your photo appear warmer

or cooler.

Goes to the Pictures folder.

ꢀp. 52

Changes the preview mode.

•

Camera shortcuts: view the functions of the

keys you can use in Capture mode.

Menu functions

4. Adjust the image by aiming the lens at the

subject.

Using photo options

After saving a photo, press <Options> to access

the following options:

•

Press <Options> to use the camera options.

See the next section.

•

Viewfinder: return to Capture mode.

•

Use the keypad to change the camera

View: open the selected photo when you take

multiple photos.

settings or switch to other modes.

ꢀp. 63

5. Press to start recording.

•

Send: send the photo via MMS, e-mail, file

messenger, Bluetooth, or infrared port.

To pause, press <Pause>.

6. When you have finished, press

. The video

•

Delete: delete the photo.

automatically saves in the Videos folder.

Set as: set the photo as your wallpaper for main

or external display, or as a caller ID image for a

Phonebook entry.

7. To Press

use the video options

delete the video clip

return to Record mode

Options>.

ꢀp. 65

•

Go to photos: display the photos stored in the

Pictures folder.ꢀp. 52

<Delete> or [

C].

Rename: change the name of the photo.

Recording a video

Using camera options in Record mode

You can use your phone just like a camcorder to

record what is currently displayed on the camera

screen and save it as a video file. The camera will

produce 3gp video clips.

In Record mode, press <Options> to access the

following options:

•

Record: start recording.

Take photo: switch to Capture mode.

1. To turn on the camera, access the Camera menu

or press and hold [ ].

Switch camera: switch between the interior

lens or exterior lens.

2. Press [1] to switch to Record mode.

•

Go to videos: display the video clips stored in

3. Press [ ] to switch between the interior lens

below the display and the exterior lens on the

external of the phone.

the Videos folder.

ꢀp. 53

•

Effects: change the colour tone of the image.

Zoom: display the zoom control bar.

•

Brightness: display the brightness control bar.

Key

Function

Video settings: change the following settings

for recording a video:

Switches to Capture mode.

Changes the frame size.

changes the image quality.

ꢀp. 62

Default name: change the default prefix of the

video name.

Default storage: select a memory location to

store video clips.

Changes the video recording mode.

Changes the colour tone of the

image.

Quality: select an image quality.

Recording time: select a video recording mode.

Turns the audio on or off.

Select Normal to record a video within the limit

of the currently available memory. The length of

your video is determined by how much memory

has been used.

Goes to the Videos folder.ꢀp. 53

Using video options

After saving a video clip, press <Options> to access

the following options:

Select Limit for MMS to record a video suitable

for an MMS message.

•

Play: play back the video clip.

Size: select an image size.

Viewfinder: return to Record mode.

Audio record: turn the audio on or off.

Send: send the video clip via MMS, e-mail, file

messenger, Bluetooth, or infrared port.

•

Camcorder shortcuts: view the functions of

the keys you can use in Record moe.

•

Delete: delete the video clip.

Using the keypad in Record mode

Go to videos: display the video clips stored in

the Videos folder.

ꢀp. 53

Key

Function

•

Rename: change the name of the video clip.

Flips the image vertically.

Shows the mirror image.

Adjusts the image brightness.

Zooms in or out.

Left/Right

Up/Down

Menu functions

•

Phone sounds: press

various sounds on the phone on or off.

and turn the

Settings (Menu 9)

Use this menu to customise your phone settings.

You can also reset the settings to their default

values.

All on: enable all tones.

Popup box alerts: cause the phone to beep

when a pop-up window displays.

To access this menu, press

select Settings

in Idle mode and

Minute minder: cause the phone to beep

every minute during an outgoing call to keep

you informed of the length of your call.

Profiles (Menu 9.1)

Call connect tone: cause the phone to beep

when a call is connected to the system.

Use this menu to adjust and customise the phone

tone for different events or situations.

Call end tone: cause the phone to beep

when a call is disconnected by the other

person or the faded signal.

Editing a profile

1. Select the profile you want.

Power on/off: cause the phone to beep

when you turn on the phone.

2. Press <Options> and select Edit

3. Change the sound settings:

Folder open/close: cause the phone to

sound when you open or close the phone.

•

Call alert type: press

type for the call ringer.

and select an alert

Alerts on call: cause the phone to beep

when you receive a new message or when

the time for an alarm comes during a call.

Voice call ringtone: press

ring tone for the call ringer of voice calls.

Video call ringtone: press and select a

ring tone for the call ringer of video calls.

Tone volume: adjust the volume for the call

ringer.

and select a

•

Key tones: press

and select a tone which

sounds when you press a key.

Key tone volume: adjust the volume of the

key tones.

Message alert type: press

alert type for the message ringer.

and select an

Call answer mode (For Car): Press

and

select how to answer an incoming call when

the phone is connected to a hands-free car

kit.

Message alert tone: press

ring tone for the message ringer.

Message alert repetition: select if the

phone repeats reminding you of a new

message.

and select a

4. When you have finished, press <Options> and

select Save

2. Select the menu that will be assigned to the key.

Changing an active profile

3. Press <Save>.

Select the profile you want.

Using the shortcut options

Time & date (Menu 9.2)

From the Shortcuts screen, press <Options> to

access the following options:

Use this menu to change the time and date

displayed on your phone. Before setting the time

and date, specify your time zone in the World clock

•

Assign: assign a shortcut menu to an empty

location.

menu.

ꢀp. 34

•

Change: change a shortcut menu.

•

Time: enter the current time.

Remove: deactivate the shortcut assignment to

the selected key.

Date: enter the current date.

Time format: select a 12-hour or 24-hour time

format.

•

Remove all: deactivate all shortcut

assignments.

•

Date format: select a date format.

Active folder (Menu 9.3.3)

Summer time: activate daylight savings time.

Auto update: select to receive time information

from your network.

Use this menu to answer incoming calls by opening

the phone.

Anykey answer (Menu 9.3.4)

Phone (Menu 9.3)

Use this menu to answer an incoming call by

pressing any key, except [ ] or <Reject>.

Many different features of your phone’s system can

be customised to suit your preferences.

Side key (Menu 9.3.5)

Language (Menu 9.3.1)

Use this menu to set how the phone reacts when

you press and hold [ / ] when a call comes in.

Use this menu to select one of several languages for

the display text or T9 input mode.

•

Reject: the keys reject the call.

Shortcuts (Menu 9.3.2)

Silence: the keys mute the call ringer.

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to change these shortcut assignments.

Key management (Menu 9.3.6)

Use this menu to manage the license keys you have

acquired to activate media contents locked by DRM

systems.

Assigning a shortcut to a key

1. Select the key to be used as a shortcut key.

Menu functions

Backlight (Menu 9.4.5)

Display (Menu 9.4)

You can change the settings for backlight or icons for

the external display.

Use this menu to change settings for the display.

Greeting message (Menu 9.4.1)

•

On: select the length of time the backlight stays

on in times of inactivity.

Use this menu to enter the greeting that is displayed

on the main display or external display.

Dim: select the length of time the display is in

Dimming mode after the backlight turns off.

Wallpaper (Menu 9.4.2)

Sub LCD indicator: set whether on not the

icons are shown on the external display after the

display turns off.

You can change the background image that is

displayed on the main display in Idle mode.

Cover LCD (Menu 9.4.3)

Dialing display (Menu 9.4.6)

Use this menu to change the settings for the

external display.

Use this menu to customise the settings for the

screen when entering a phone number for dialling.

1. Select a display item type.

•

Font size: select a font size.

•

Clock: you can select a clock type.

Cover title: you can set a banner message.

Wallpaper: you can change the wallpaper

image.

Font colour: select a font colour.

Background colour: select a background

colour.

2. Select the image you want or enter the banner

message.

Call (Menu 9.5)

Use this menu to set options for call functions.

For Wallpaper, you can select a section of an

image.

Caller ID (Menu 9.5.1)

3. Press <Save> or

Use this menu to prevent your phone number from

being displayed on the phone of the person being

called.

4. Press <Change>.

LCD brightness (Menu 9.4.4)

some networks do not allow the user to change

this setting.

Use this menu to adjust the brightness of the main

display.

•

By network: use the default setting provided by

the network.

Barring (Menu 9.5.3)

This network service allows you to restrict your calls.

1. Select the type of calls to be barred.

2. Select a call barring option:

Send: send your number each time you make a

call.

Hide: ensure your number does not display on

the other person’s phone.

•

All outgoing calls: prohibit all outgoing

calls.

Outgoing int’l calls: prohibit international

calls.

Int’l calls exc. Home: only allow calls to

numbers within the current country when you

are abroad, and to your home country.

All incoming calls: prohibit incoming calls.

Incoming calls when roaming: prohibit

incoming calls when you use your phone

outside of your home country.

Diverting (Menu 9.5.2)

This network service reroutes incoming calls to a

different phone number that you specify.

1. Select the type of calls to be diverted.

2. Select a call diverting option:

•

Always: divert all calls.

Busy: divert calls when you are on another

call.

•

No reply: divert calls when you do not

answer the phone.

Unreachable: divert calls when you are not

in an area covered by your service provider

or when your phone is switched off.

Cancel all: cancel all call diverting options.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received

normally.

3. Enter the call barring password supplied by your

service provider.

•

4. Press <Options> and select Activate. To

3. Enter the number to which the calls will be

deactivate the call barring, select Deactivate

diverted in the Divert to line.

You can change the call barring password

obtained from your service provider. From the call

type list, press <Options> and select Change

4. If you selected No reply, move to the Waiting

time line and select the length of time the

network delays before diverting a call.

password

5. Press <Options> and select Activate

To deactivate the call diverting, select

Deactivate

Menu functions

Waiting (Menu 9.5.4)

Video call (Menu 9.5.7)

This network service informs you when someone is

trying to reach you while you are on another call.

Use this menu to change the default settings for

using the video call feature.

1. Select the type of calls to which the call waiting

option will apply.

•

Show me: change the video camera settings for

receipt of video calls.

2. Press <Options> and select Activate. To

Optionally: you can select whether or not the

video camera is used each time you answer a

video call.

deactivate the call waiting, select Deactivate

Auto redial (Menu 9.5.5)

Always: the camera is always used.

Use this menu to make up to ten attempts to redial

a phone number after an unsuccessful call.

•

Retry by: set how to retry when the phone fails

to make a video call by MMS or voice call.

Closed user group (Menu 9.5.6)

Connectivity (Menu 9.6)

Use this menu to set incoming and outgoing calls to

be restricted to a selected user group. For details

about how to create a closed user group, contact

your service provider.

Use this menu to set options for connection available

on your phone.

Bluetooth (Menu 9.6.1)

•

Use user group: activate CUG index numbers.

Using Bluetooth wireless, you can connect the phone

wirelessly to other Bluetooth devices and exchange

data with them, talk hands-free, or control the

phone remotely.

Outside access: enable calls to numbers other

than those in the Closed user group. This feature

depends on the nature of your CUG subscription.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from

the list.

Bluetooth technology allows free wireless

connections between all Bluetooth-compliant

devices within a range of 10 metres. Since the

devices communicate using radio waves, they do not

need to be in line of sight to each other.

Group index: add, delete, or activate CUG

index numbers.

2. Select Search new device

• It is recommended that you do not use the

Bluetooth feature while using multimedia

features such as voice recorder, camera, and

Media player, or vice versa for a good

performance.

• Some devices may not be compatible with your

phone.

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

•

Hands-free or headset

Mobile phone

Computer

PDA

Unknown device

Setting up the Bluetooth feature

The Bluetooth menu provides the following

options:

The colour of the icon indicates the status of the

device:

•

Activation: activate or deactivate the Bluetooth

feature.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected

to your phone

My devices: search for connectable Bluetooth

devices. See the next section.

My phone’s visibility: allow other Bluetooth

devices to connect to your phone.

3. Select a device.

4. Enter a Bluetooth PIN code of up to 16 digits and

press <OK>. This code is used just once and you

don’t need to memorise it.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

When the owner of the other device enter the

same code, pairing is finished.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access

your data.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has one, you must

enter the code.

Bluetooth service: display available Bluetooth

services.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

Menu functions

Using device options

Receiving data via Bluetooth

From the device list, press <Options> to access the

following options:

To receive data via Bluetooth, your phone’s

Bluetooth feature must be active.

•

Browse device: search for data from the

selected device and import data directly to your

phone.

If an unauthorised Bluetooth device sends data to

your phone, the phone displays a confirmation

message.

To receive data, press <Yes>.

•

Connect: connect to the currently selected

device. You need to enter the Bluetooth PIN.

Infrared (Menu 9.6.2)

Disconnect: end the connection with the

device.

Use this feature to send and receive data through

the infrared port. To use an infrared connection, you

must do the following:

Authorize/Unauthorize device: determine if

the phone asks you to permit connection when

other devices try to connect to your phone.

•

Configure and activate an IrDA-compliant

infrared port on the other device.

•

Delete: delete the device or all devices.

Activate the infrared feature on your phone;

Rename: rename the selected device.

select Infrared

→

On.

Sending data via Bluetooth

Align the IrDA port on the

phone with the IrDA port on

the other device.

1. Activate the Bluetooth feature.

2. Select the application in which the item you want

to send is stored.

If there is no communication

between your phone and the

other IrDA-compliant device

within 60 seconds of activating

the feature, it is automatically

deactivated.

3. Scroll to the item you want and press

<Options>.

4. Select Send

→

Via bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Network (Menu 9.6.3)

Creating or editing a connection profile

Use this menu to change the settings for connecting

to your cellular network.

Press <Options> and select New, or select the

connection profile you want to edit. The following

options are available:

•

Network selection: select to either

automatically or manually select the network

used when roaming outside of your home area.

You can select a network other than your home

network only if there is a valid roaming

agreement between the two.

•

Set name: edit the name of the network setting.

Access name: edit the access point name used

for the address of the GPRS network gateway.

•

Auth type: choose the type of authentication

used.

•

Network mode: select the network you use.

•

User ID: edit the server login ID.

Automatic: the phone scans for available

networks.

Password: edit the server password.

Protocol: select the protocol from among WAP

HTTP, and Other

Home URL: enter your homepage address.

Proxy address Port: (for the HTTP protocol)

GSM 900/1800: the phone operates in the

combined GSM 900/1800 network.

•

GSM 1900: the phone operates in the GSM

1900 network. This option is only available in

USA.

set the proxy server address and port.

•

Gateway address: (for the WAP protocol) set

the gateway address.

UMTS: the phone operates in UMTS (3G

network) networks. You can get a higher speed

quality than on lower generation networks, and

use advanced data and information services,

such as video calls.

Secure connection: (for the WAP protocol) turn

the secure mode on or off.

Linger time (sec.): set a time period after

which the network is disconnected if there has

been no new data traffic in that time.

Connections (Menu 9.6.4)

You can set up information about your network

connection. In most cases, you don’t need to change

the settings. In case of problems, please contact

your service provider.

•

Advanced settings: provide you with the

following options:

Static IP: specify if you want to manually enter

an IP address; see the Local phone IP option. If

you want the IP address to be automatically

assigned by the server, remove the check mark.

Menu functions

Local phone IP: enter the IP address obtained

from the network operator, if you checked the

Static IP option.

Application settings (Menu 9.7)

You can customise the settings for using applications

available on the phone.

Static DNS: specify if you want to manually

enter the DNS (Domain Name Server) address;

see the Server 1/2 option. If you want the

address to be automatically assigned by the

server, remove the check mark.

Internet (Menu 9.7.1)

Use this menu to select a connection profile to be

used for accessing the Internet. You can also make

or edit a profile.ꢀp. 73

Server 1/2: enter the Domain Name Server

Messages (Menu 9.7.2)

addresses.

Use this menu to change the default settings for

Traffic class: select the traffic class, if you

selected the PS network.

using the message feature.

ꢀp. 48

Managing connection profiles

Contacts (Menu 9.7.3)

On the list of connection profiles, scroll to a profile

and press <Options> to access the following

options:

Use this menu to change the settings for using

Phonebook. p. 34

ꢀ

Camera (Menu 9.7.4)

•

Edit: edit the selected connection profile.

Use this menu to change the default settings for

New: add a new connection profile.

taking photos.ꢀp. 62

Rename: change the name of the selected

connection profile.

Video recorder (Menu 9.7.5)

•

Delete: delete the selected connection profile.

Use this menu to change the default settings for

recording video clips.ꢀp. 65

Restore: restore the changed settings to the

default status.

Voice recorder (Menu 9.7.6)

You cannot edit or delete the default connection

profiles.

Use this menu to change the default settings for the

voice recorder.ꢀp. 37

Media player (Menu 9.7.7)

SIM lock (Menu 9.8.2)

Use this menu to change the default settings for

The SIM Lock feature allows your phone to work only

with the current USIM/SIM by assigning a USIM/SIM

lock code. You must enter the USIM/SIM lock code

to use a different USIM/SIM card.

playing media files in the Media player.

ꢀp. 36

VOD (Menu 9.7.8)

Use this menu to activate a connection profile to be

used for accessing streaming servers to use VOD

(Video on Demand) services. You can also make or

PIN lock (Menu 9.8.3)

The 4- to 8-digit PIN (Personal Identitication

Number) protects your USIM/SIM card against

unauthorised use. When this feature is enabled, the

phone requires your PIN each time it is switched on.

edit a profile.ꢀp. 73

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and USIM/SIM card.

Fixed dialling mode (Menu 9.8.4)

If supported by your USIM/SIM card, Fixed Dial

Number (FDN) mode restricts your outgoing calls to

a limited set of phone numbers. When this feature is

enabled, you can make calls only to phone numbers

stored on the USIM/SIM card. To use this feature,

you must enter your PIN2.

If you enter an incorrect PIN/PIN2 three times in

succession, the USIM/SIM card is blocked. To

unblock it, you need to enter your PUK/PUK2

(Personal Unblocking Key). The codes are

supplied by your network operator.

Change phone password (Menu 9.8.5)

Phone lock (Menu 9.8.1)

Use this menu to change your phone password. The

The Phone Lock feature locks the phone from

unauthorised use.

password is preset to 00000000

Privacy lock (Menu 9.8.6)

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

Use this menu to lock your messages, media

contents, contacts, and call logs.

1. Press

to check the item(s) to lock.

The password is preset to 00000000. To change the

password, use the Change phone password

menu.

2. Press <Save> to lock the marked items.

3. Enter the phone password and press

Confirm>.

Solve problems

Help and personal needs

To access a locked item, you need to enter the

phone password.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

Change PIN code (Menu 9.8.7)

Use this menu to change your PIN. The PIN Check

feature must be enabled to use this feature.

When you switch on your phone, the

following messages may appear:

Change PIN2 code (Menu 9.8.8)

“Please insert SIM card”

If supported by your USIM/SIM card, the Change

PIN2 feature changes your current PIN2.

•

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been

•

Memory status (Menu 9.9)

enabled. You must enter the phone’s password

before you can use the phone.

Use this menu to check the amount of memory

being used for storing data, such as SMS, MMS,

Email, Push messages, File manager, Contacts, and

Organiser items. You can also view the amount of

shared memory or the memory card.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN Check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN lock menu.

Reset settings (Menu 9.0)

Use this menu to reset the phone to its default

settings.

“Enter PUK”

The PIN code was entered incorrectly three times

1. Enter the phone password and press

•

Confirm>.

The password is preset to 00000000. You

can change this password. p. 75

in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

ꢀ

2. Press <Yes>. The phone automatically turns

itself off and then back on.

“No service,” “Network failure,” or “Not

done” displays

The phone starts beeping and “Low battery”

flashes on the display

•

The network connection has been lost. You may

be in a weak signal area. Move and try again.

•

Your battery is insufficiently charged. Recharge

the battery.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The audio quality of the call is poor

•

Check the signal strength indicator on the

display ( ). The number of bars indicates the

signal strength from strong ( ) to weak ( ).

You have entered a number but it was not

dialled

•

Try moving the phone slightly or moving closer

to a window if you are in a building.

Be sure that you have pressed [ ].

Be sure that you have accessed the right cellular

network.

No number is dialled when you re-call a

Phonebook entry

•

Use the Contacts Search feature to ensure the

number has been stored correctly.

Your correspondent cannot reach you

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

Re-store the number, if necessary.

Be sure that you are accessing the correct

cellular network.

If the above guidelines do not help you to

solve the problem, take note of:

•

Be sure that you have not set an incoming call

barring option.

The model and serial numbers of your phone

Your warranty details

Your correspondent cannot hear you

speaking

A clear description of the problem

Then contact your local dealer or Samsung after-

sales service.

•

Be sure that you have switched on the

microphone.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is

located at the bottom of the phone.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest

certified power level, the actual SAR level of the

phone while operating can be well below the

maximum value. This is because the phone is

designed to operate at multiple power levels so as to

use only the power required to reach the network. In

general, the closer you are to a base station, the

lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU)

requirements concerning exposure to radio waves.

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured to not

exceed the limits for exposure to radio-frequency

(RF) energy, as recommended by the EU Council.

These limits are part of comprehensive guidelines

and establish permitted levels of RF energy for the

general population. The guidelines were developed

by independent scientific organisations through the

periodic and thorough evaluation of scientific

studies. The limits include a substantial safety

margin designed to ensure the safety of all persons,

regardless of age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE

Directive must be shown. This directive includes as

one of its essential requirements the protection of

the health and safety of the user and any other

person.

Precautions when using batteries

The exposure standard for mobile phones employs a

unit of measurement known as Specific Absorption

Rate (SAR). The SAR limit recommended by the EU

Council is 2.0 W/kg.^*

•

Never use a charger or battery that is damaged

in any way.

•

Use the battery only for its intended purpose.

The highest SAR value for this model phone was

0.994 W/kg.

If you use the phone near the network’s base

station, it uses less power. Talk and standby time

are greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body

tissue. The limit incorporates a substantial margin of safety

to give additional protection for the public and to account for

any variations in measurements. The SAR values may vary,

depending on national reporting requirements and the

network band.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the

charger used. The battery can be charged and

discharged hundreds of times, but it will

gradually wear out. When the operation time is

noticeably shorter than normal, it is time to buy

a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a

coin, clip or pen causes a direct connection

between the + and – terminals of the battery

(metal strips on the battery). For example, do

not carry a spare battery in a pocket or bag

where the battery may contact metal objects.

Short-circuiting the terminals may damage the

battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will

discharge itself over time.

•

Dispose of used batteries in accordance with

local regulations. Always recycle. Do not dispose

of batteries in a fire.

Use only Samsung-approved batteries, and

recharge your battery only with Samsung-

approved chargers. Disconnect the charger from

the power source when it is not in use. Do not

leave the battery connected to a charger for

more than a week, since overcharging may

shorten its life.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime.

But an important responsibility accompanies the

benefits of wireless phones, one that every user

must uphold.

•

Extreme temperatures will affect the charging

capacity of your battery: it may require cooling

or warming first.

Do not leave the battery in hot or cold places

because the capacity and lifetime of the battery

will be reduced. Try to keep the battery at room

temperature. A phone with a hot or cold battery

may not work temporarily, even when the

battery is fully charged. Li-ion batteries are

particularly affected by temperatures below 0°C

(32°F).

When driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or

region you are in.

Operating environment

Remember to follow any special regulations in force

in the area you are in, and always switch off your

phone whenever it is forbidden to use it, or when it

may cause interference or danger.

Health and safety information

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

Hearing aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such

interference, you may wish to consult your hearing

aid manufacturer to discuss alternatives.

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it

is recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

Other medical devices

If you use any other personal medical devices,

consult the manufacturer of your device to

determine if it is adequately shielded from external

RF energy.

Electronic devices

Your physician may be able to assist you in obtaining

this information.

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against

the RF signals from your wireless phone. Consult the

manufacturer to discuss alternatives.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do

so.

Vehicles

Pacemakers

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

Pacemaker manufacturers recommend that a

minimum distance of 15 cm (6 inches) be

maintained between a wireless phone and a

pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent

with the independent research and

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

recommendations of Wireless Technology Research.

If you have any reason to suspect that interference

is taking place, switch off your phone immediately.

Posted facilities

Switch off your phone in any facility where posted

notices require you to do so.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a

potentially explosive atmosphere, and obey all signs

and instructions. Sparks in such areas could cause

an explosion or fire resulting in bodily injury or even

death.

This phone, like any wireless phone, operates using

radio signals, wireless, and landline networks as well

as user-programmed functions, which cannot

guarantee connection in all conditions. Therefore,

you should never rely solely on any wireless phone

for essential communications like medical

emergencies.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded

of the need to observe restrictions on the use of

radio equipment in fuel depots (fuel storage and

distribution areas), chemical plants, or where

blasting operations are in progress.

To make or receive calls, the phone must be

switched on and in a service area with adequate

signal strength. Emergency calls may not be

possible on all wireless phone networks or when

certain network services and/or phone features are

in use. Check with local service providers.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

the areas below decks on boats, chemical transfer or

storage facilities, vehicles using liquefied petroleum

gas, such as propane or butane, areas where the air

contains chemicals or particles, such as grain, dust

or metal powders, and any other area where you

would normally be advised to turn off your vehicle

engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press [ ].

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the

phone or install the phone in a vehicle. Faulty

installation or service may be dangerous and

may invalidate any warranty applicable to the

device.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for

many years.

•

Check regularly that all wireless phone

equipment in your vehicle is mounted and

operating properly.

•

Keep the phone and all its parts and accessories

out of the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not store or carry flammable liquids, gases,

or explosive materials in the same compartment

as the phone, its parts, or accessories.

•

Do not use the phone with a wet hand. Doing so

may cause an electric shock to you or damage to

the phone.

For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including installed or portable

wireless equipment, in the area over the air bag

or in the air bag deployment area. Improperly

installed wireless equipment could result in

serious injury if the air bag inflates.

•

Do not use or store the phone in dusty, dirty

areas, as its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt

certain plastics.

•

Switch off your phone before boarding an

aircraft. It is dangerous and illegal to use

wireless phones in an aircraft because they can

interfere with the operation of the aircraft.

•

Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the

phone, which may damage the phone’s

electronic circuit boards.

Failure to observe these instructions may lead to

the suspension or denial of telephone services to

the offender, or legal action, or both.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

•

Do not use harsh chemicals, cleaning solvents,

or strong detergents to clean the phone. Wipe it

with a soft cloth slightly dampened in a mild

soap-and-water solution.

•

Do not paint the phone. Paint can clog the

device’s moving parts and prevent proper

operation.

Do not put the phone in or on heating devices,

such as a microwave oven, stove, or radiator.

The phone may explode when overheated.

Use only the supplied or an approved

replacement antenna. Unauthorised antennas or

modified accessories may damage the phone and

violate regulations governing radio devices.

•

If the phone, battery, charger, or any accessory

is not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if necessary, arrange for service.

holding • 26

redialling • 25

rejecting • 25

wa iting • 70

SMS messages • 44

video clips • 65

Delivery reports, message • 48, 49

Dialle d calls • 30

Index

ABC mode, text input • 24

Alarm • 58

Camera

Display

photos • 62

videos • 64

language • 67

settings • 68

Answering

call • 25, 28

Characters, enter • 23

Conference call • 28

Configuration messages • 45

Connection tone • 66

Contacts

Diverting, calls • 69

DTMF tones, send • 27

second call • 26

Anykey answer • 67

Auto redial • 70

E-mails

creating/sending • 43

deleting • 46

settings • 50

viewing • 46

Emergency calls • 81

Backlight time, set • 68

Barring, calls • 69

Battery

copying • 34

deleting • 31, 34

editing • 31, 32

options • 31

charging • 7

low indicator • 8

precautions • 78

Bluetooth

setting • 34

speed-dialling • 33

Conversion • 38

Creating messages

e-mail • 43

FDN (Fixed Dial Number) mode • 75

File messenger • 42

Forwarding

receiving, data • 72

sending, data • 72

settings • 71

MMS with attachments • 42

MMS • 41

SMS • 41

e-mails • 46

MMS messages • 45

Browser, WAP • 39

Creating organiser

anniversaries • 59

events • 58

Calculator • 38

Call costs • 30

Call records

Games • 56

Greeting message • 68

memos • 59

tasks • 59

dialled • 30

missed • 29

received • 30

Call time • 31

Caller group, managing • 33

Caller ID • 68

Calls

Health and safety • 78

Holding, call • 26

Deleting

contacts • 31

e-mails • 46

events • 60

missed alarms • 61

MMS messages • 45

photos • 53, 64

Icons, description • 10

Images, downloaded • 52

Inbox, messages

e-mail • 46

answering • 25, 28

barring • 69

diverting • 69

MMS • 43

SMS • 43

web • 45

Infrared, connect • 72

International calls • 25

Internet • 39

Missed calls • 29

MMS messages

deleting • 53, 64

editing • 52

creating/sending • 41, 42

taking • 62

deleting • 45

settings • 49

viewing • 44

viewing • 52

PIN, change • 76

PIN2, change • 76

Power on/off tone • 66

Privacy • 75

Problems, solve • 76

Profiles • 66

Multi-party calls • 28

Music files, downloaded • 55

Muting

key tone volume • 66

Keypad tones

sending • 27

settings • 66

key tones • 27

microphone • 27

Received calls • 30

Received messages

configuration • 45

e-mail • 46

Language, select • 67

Last number, redial • 25

Locking

Name card • 34

Names

entering • 23

searching • 31

Network selection • 73

media contents • 75

phone • 75

SIM card • 75

MMS • 44

SMS • 44

web • 45

Loudspeaker • 27

Low battery indicator • 8

Recording

Organiser • 57

Outbox, messages • 45

Own number • 34

vidoes • 64

voice memos • 37

Redialling

Memory card • 21

Memory status

contacts • 34

messages • 52

phone • 76

scheduled events • 61

Messages

automatically • 70

manually • 25

Resetting phone • 76

Road safety • 79

Roaming • 73

Password

barring • 69

phone • 75

Phone

care and maintenance • 82

display • 10

icons • 10

configuration • 45

greeting • 68

MMS with attachments • 42

MMS • 41

SMS • 41

web • 45

Safety

information • 78

precaution • 1

Sent messages • 45

SIM card

inserting • 7

locking • 75

SMS messages

locking • 75

password • 75

resetting • 76

switching on/off • 8

unpacking • 6

Photos

Minute minder • 66

Missed alarm events • 61

creating/sending • 41

deleting • 44

Waiting call • 70

Wallpaper • 68

WA P b ro w ser • 39

World time • 38

settings • 48

viewing • 44

Sound settings • 66

Sounds, downloaded • 56

Speed-dial • 33

Switching on/off

microphone • 27

phone • 8

Templates

MMS • 47

text • 47

Text input mode, change • 23

Text, enter • 23

Tone

connect • 66

keypad • 66

message • 66

minute minder • 66

power on • 66

Video calls

making • 28

setting • 70

Video clips

deleting • 65

playing • 53

recording • 64

Voice mail server • 51

Voice memos

playing • 37

recording • 37

Toastmaster ME2DTMBCAN User Manual
Sony Computer Drive AWG2040 User Manual
Seagate Momentus ST91608220AS User Manual
Samsung Cell Phone GUSTO User Manual
Samsung SGH S307 User Manual
PYLE Audio PDCD510MU User Manual
PowerFile C200 User Manual
Philips AZ7794 User Manual
Palm Treo Smartphone 600 User Manual
Oregon Scientific STARCK PS M03 User Manual