SGH-Z150
User’s Guide
Be aware of special regulations
Accessories and batteries
Use only Samsung-approved batteries and
accessories, such as headsets and PC data cables.
Use of any unauthorised accessories could damage
you or your phone and may be dangerous.
Meet any special regulations in force in any area and
always switch off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger.
• The phone could explode if the battery is replaced with
an incorrect type.
Water resistance
• Dispose of used batteries according to the
manufacturer’s instructions.
Your phone is not water-resistant. Keep it dry.
Sensible use
At very high volumes, prolonged listening to a
headset can damage your hearing.
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency calls
Qualified service
Key in the emergency number for your present
Only qualified service personnel may repair your
phone.
location, then press
.
Keep your phone away from small children
For more detailed safety information, see "Health
and safety information" on page 79.
Keep the phone and all its parts, including
accessories, out of the reach of small children.
1
About this Guide
•
3G
This User’s Guide provides you with condensed
information about how to use your phone. To quickly
learn the basics for your phone, please refer to “Get
started” and “Step outside the phone.”
Your phone is capable of operating
in a 3G environment, allowing
much greater data transfer speed,
video streaming, and video
conferencing.
In this guide, the following instruction icons appear:
Indicates that you need to pay careful
attention to the subsequent information
regarding safety or phone features.
Special
features of your phone
Indicates that you can get more
information on the referenced page.
ꢀ
•
Camera and camcorder
Use the camera module on your
phone to take a photo or record a
video.
→
Indicates that you need to press the
Navigation keys to scroll to the specified
option and then select it.
[
]
Indicates a key on the phone. For example,
•
•
Media player
Play media files on your phone.
[
]
< >
Indicates a soft key, whose function is
displayed on the phone screen. For
example, <Msg.
>
Web browser
Access the wireless web to get
up-to-the-minute information and
a wide variety of media content.
2
•
Bluetooth
•
•
Multimedia Message Service (MMS)
Deliver MMS messages with a combination of
text, images, and audio.
Send photos, images, videos, and
other personal data, and connect to
other devices using free, wireless
Bluetooth technology.
E-mail
Deliver e-mails with image, video, and audio
attachments.
•
•
Contacts
Store home, office, or cellular
phone numbers for your contacts.
•
Java
Enjoy Java™-based embedded
games and download new games.
Get personal with photo caller
ID
See who’s calling you with their
very own photo displays.
•
•
Organiser
Keep track of your daily, weekly,
and monthly schedule.
•
Name card
Create name cards with your
number and profile whenever
introducing yourself to others use
this convenient electronic name
card.
Voice recorder
Record memos or sounds.
3
Send messages ............................................. 18
View messages.............................................. 20
Use Bluetooth................................................ 21
Switch applications......................................... 22
Contents
Unpack
6
6
7
Make sure you have each item
Your phone
Enter text
23
25
29
77
Buttons, features, and locations
ABC, T9, Number, and Symbol mode
Get started
Call functions
First steps to operating your phone
Advanced calling features
Install and charge the phone.............................. 7
Power on or off ................................................ 8
Keys and display .............................................. 9
Access menu functions.................................... 11
Customise your phone..................................... 12
Make/Answer calls.......................................... 14
Menu functions
All menu options listed
Solve problems
Help and personal needs
Step outside the phone
14
Health and safety information
Index
79
85
Begin with your camera, the media player, the web, and
other special features
Use camera ................................................... 14
Play media files.............................................. 15
Play games.................................................... 16
Browse the web.............................................. 17
4
Overview of menu functions
To access Menu mode, press [Centre] in Idle mode.
1 Call log
ꢀp. 29
4 Internet
ꢀp. 39
ꢀ
p. 59
1 Missed calls
2 Dialled calls
3 Received calls
4 Current contacts
5 Delete all
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 29
p. 29
p. 29
p. 29
p. 29
p. 30
p. 30
p. 30
1 Go to homepage
2 Enter URL
3 Favourites
4 History
5 Browser settings
6 Network settings
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 39
p. 40
p. 40
p. 41
p. 41
p. 41
1 Alarms
2 Calendar
3 Week view
4 Today’s events
5 Schedule
6 Anniversary
7 Task
8 Memo
9 Missed event alarm
0 Memory status
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 59
p. 59
p. 61
p. 61
p. 62
p. 62
p. 62
p. 62
p. 62
p. 62
6 Data calls
7 Calls cost*
8 Calls time
5 Messages
ꢀp. 41
1 Create new
2 Inbox
3 Drafts
ꢀp. 41
ꢀp. 44
ꢀp. 46
ꢀp. 46
ꢀp. 46
ꢀp. 47
ꢀp. 48
ꢀp. 48
ꢀp. 48
ꢀp. 49
ꢀp. 49
ꢀp. 53
2 Contacts
ꢀp. 31
1 Search contact
2 New contact
3 Groups
4 Speed dial
5 My name card
6 Copy all
7 Own number
8 Service number*
9 Settings
ꢀp. 31
ꢀp. 31
ꢀp. 32
ꢀp. 33
ꢀp. 33
ꢀp. 34
ꢀp. 34
ꢀp. 34
ꢀp. 34
ꢀp. 34
8 Camera
ꢀ
p. 62
4 Outbox
5 Sent box
6 Email inbox
7 Media Alubm**
8 Templates
9 Broadcast
0 Delete all
Settings
9 Settings
ꢀ
p. 67
1 Profiles
2 Time & date
3 Phone
4 Display
5 Call
6 Connectivity
7 Application settings
8 Security
9 Memory status
0 Operator settings**
* Reset settings
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
ꢀ
p. 67
p. 68
p. 68
p. 69
p. 69
p. 71
p. 75
p. 76
p. 77
p. 77
p. 77
0 Memory status
Memory status
3 Applications
ꢀp. 34
6 File manager
ꢀp. 53
1 SAT*
Images
Videos
Music
Sounds
Games & More
Other files
ꢀp. 54
ꢀp. 55
ꢀp. 56
ꢀp. 57
ꢀp. 57
ꢀp. 58
ꢀp. 34
ꢀp. 35
ꢀp. 36
ꢀp. 38
ꢀp. 38
ꢀp. 39
2 Media player
3 Voice recorder
4 World clock
5 Calculator
6 Converter
* Shows only if supported by your USIM/
SIM card.
** Shows only if supported by your service
provdier.
5
Unpack
Your phone
Make sure you have each item
Buttons, features, and locations
Rear camera
Earpiece
Front camera
Travel Adapter
Phone
Display
Headset jack
Volume keys
Menuaccess/Confirm
(Centre) key
Navigation keys
(Up/Down/Left/
Right)
Camera key
Right soft key
Battery
User’s Guide
Left soft key
Video call key
Application
switch key
You can obtain various accessories from
your local Samsung dealer.
Power On/Off/
Menu exit key
Delete key
Dial key
The items supplied with your phone
and the accessories available at your
Samsung dealer may vary, depending
on your country or service provider.
Alphanumeric
keys
Special function
keys
Microphone
6
Get started
Install the battery.
Replace the cover.
First steps to operating your phone
USIM/SIM card information
When you subscribe to a cellular network, you
receive a plug-in SIM (Subscriber Identity Module)
card loaded with your subscription details, such as
your PIN and available optional services. For 3G
services, you can purchase a USIM card.
Plug the travel adapter into the phone.
Install and charge the phone
Remove the battery
cover.
Insert the SIM card.
Plug the adapter into a standard AC wall outlet.
If the phone is already
on, first turn it off by
holding [ ].
Make sure that the
gold-coloured contacts
on the card are face
down.
7
Get started
Power on or off
When the phone is completely charged (the
battery icon becomes still), unplug the adapter
from the power outlet.
Switch on
1. Press and hold [ ] to turn
on the phone.
Remove the adapter from the phone.
2. If necessary, enter the PIN
Do not turn on the
phone when
mobile phone use
is prohibited.
and press <Confirm>.
Switch off
Press and hold [ ].
Low battery indicator
Keypad lock
When the battery is low:
You can lock the keypad to prevent accidental key
presses from affecting phone operations.
•
•
•
a warning tone sounds,
the battery low message displays, and
In Idle mode, press and hold [ ] and press <Yes>.
To unlock the keypad, press the left soft key and
then [ ].
the empty battery icon
blinks.
If the battery level becomes too low, the phone
automatically turns off. Recharge your battery.
You can also set the phone to lock the keypad
automatically.ꢀp. 68
8
Keys and display
End a call.
Keys
Press and hold to switch the phone on
and off.
Perform the function indicated on the
bottom line of the display.
In Menu mode, cancel input and return
the phone to Idle mode.
In Idle mode, access your favourite
Enter numbers, letters, and some
special characters.
menus directly.ꢀp. 68
In Menu mode, scroll through menu
options.
In Idle mode, press and hold [
access your voicemail server. Press and
hold [ ] to enter an international call
prefix.
1] to
0
In Idle mode, access Menu mode.
In Menu mode, select the highlighted
menu option or confirm input.
Enter special characters.
In Idle mode, press and hold [ ] to
activate or deactivate the Silent profile.
Press and hold [ ] to enter a pause
between numbers.
Make a video call.
Open the application switch window to
other applications without exiting the
current application.
Adjust the phone volume.
In Idle mode, adjust the key tone
volume.
Make or answer a call.
In Idle mode, retrieve numbers
recently dialled, missed, or received.
In Idle mode, press and hold to turn on
the camera.
Delete characters from the display or
an item in an application.
In Camera mode, switch the camera
lens.
9
Get started
Display
Layout
Video call in progress
The display has three areas.
Out of your service area; you
cannot send or receive video
calls
Icons
display various icons.
Text and graphics
display messages,
instructions, and
Bluetooth active
Connected with a Bluetooth
hands-free car kit or headset
information you enter.
Connected with a computer
via a USB port
Soft key function
indicators
show the current
functions assigned to
the two soft keys.
Select
Back
Browsing Internet on PC
using phone as modem
Icons*
Received signal strength
Connected to a secured web
page
Accessing services in a 2.5G
network; when transferring
data, this icon animates
New message
•
•
•
•
•
•
: SMS
: MMS
: Email
: Voicemail
: Push message
: Configuration message
Accessing services in a 3G
network; when transferring
data, this icon animates
Roaming network
Voice call in progress
Out of your service area; you
cannot send or receive voice
calls
10
Access menu functions
Inbox full
•
•
•
•
•
: SMS
: MMS
: Email
: Voicemail
: Configuration message
Use the soft
keys
The roles of the soft keys vary
depending on the function you are
using. The bottom line of the
display indicates their current
role.
Sound profile setting
•
•
•
•
•
: Normal
: Meeting
: Car
: Silent
: Outdoor
Select
Back
Battery power level
Press the right soft
key to return to
the previous menu
level.
Press the left soft
key to select the
highlighted
* Depending on your country or service provider, the icons
shown on the display may vary.
option.
In each main menu, one of the
most popular submenus is
assigned to the left soft key.
This allows you to quickly
access the most popular
menus.
11
Get started
Customise your phone
Select an
option
1. Press the appropriate soft
key.
1. In Idle mode, press [Centre]
and select Settings Phone
Language Screen text
Display
language
2. Press the Navigation keys to
move to the next or previous
option.
→
→
→
.
2. Select a language.
3. Press <Select> or [Centre]
to confirm the function
displayed or option
3. Press <Save>.
You can change the call ringer by
changing the properties of the
currently active sound profile.
highlighted.
Call ringer
melody
4. To exit, choose either of the
following methods:
To change the profile properties:
1. In Idle mode, press [Centre]
•
Press <Back> to move
up one level.
and select Settings
Profiles
→
•
Press [ ] to return to
Idle mode.
.
2. Scroll to the sound profile you
are using.
Use shortcuts Press the number key
corresponding to the option you
want.
3. Press <Options> and select
Edit
.
4. Select Voice call ringtone
and select a ringtone for
voice calls.
5. Press <Select>.
6. Select Video call ringtone
and select a ringtone for
video calls.
12
7. Press <Select>.
You can activate the Silent profile
to avoid disturbing other people.
Silent profile
Phone lock
8. Press <Options> and select
Press and hold [ ] in Idle mode.
Save
.
To change the sound profile:
You can protect the phone
against unauthorised use with a
phone password. The phone will
require the password on
power-up.
1. In Idle mode, press [Centre]
and select Settings
Profiles
→
.
2. Select the profile you want.
1. In Idle mode, press [Centre]
You can set wallpaper for the idle
screen.
and select Settings
Security Change phone
password
→
Idle mode
wallpaper
→
.
1. In Idle mode, press [Centre]
and select Settings
Display Wallpaper
2. Scroll to an image folder
→
.
2. Enter the default password,
→
00000000, and press
<Confirm>.
.
3. Enter a new 4- to 8-digit
password and press
3. Select an image.
4. Press <Set>.
<Confirm>.
4. Enter the new password
You can set the Navigation keys
to function as shortcuts to access
your favourite menus.
Menu
shortcuts
again and press <Confirm>.
5. Select Phone lock
6. Select Enable
7. Enter the password and press
Confirm>.
.
.
1. In Idle mode, press [Centre]
and select Settings
Phone Shortcuts
2. Select a key.
→
.
→
<
3. Select a menu to be assigned
to the key.
13
Make/Answer calls
Step outside the phone
Begin with your camera, the media player, the web, and
other special features
To make a voice call:
Make a call
1. Enter an area code and
phone number.
Use camera
2. Press [ ].
1. In Idle mode, press and hold
3. To end the call, press [ ].
To make a video call:
Take a photo
[
] to turn on the camera.
2. Press [ ] to switch between
the front lens and the rear
lens.
1. Enter an area code and
phone number.
2. Press [ ], and if their phone
is compatible, the other
person appears on the
screen.
3. Aim the lens at the subject
and make any desired
adjustments.
4. Press [Centre] to take a
photo. The photo is saved
automatically.
1. When the phone rings, press
Answer a call
[
].
2. For a video call, press
Show me> to allow the
5. Press [Centre] to take
another photo.
<
other person to see you.
1. In Idle mode, press [Centre]
View a photo
3. To end the call, press [ ].
and select File manager
Images
2. Select the photo you want.
→
.
Press [ / ].
Adjust the
volume during
a call
14
Play media files
1. In Idle mode, press and hold
] to turn on the camera.
Record a video
[
Use these methods:
Copy media
files to the
phone
2. Press [1] to switch to Record
•
Download from the wireless
web p. 39
mode.
ꢀ
3. Press [ ] to switch between
the front lens and the rear
lens.
•
Download from a computer
using the optional Samsung
PC StudioꢀSamsung PC
4. Press [Centre] to start
recording.
Studio User’s Guide
•
Receive via Bluetooth
ꢀp. 73
5. Press [Centre] to stop
recording. The video is saved
automatically.
1. In Idle mode, press [Centre]
and select Applications
Media player
2. Press <Options> and select
Open play list
3. Press <Options> and select
Add Folder or Files
Create a play
list
→
.
6. Press [Centre] to record
another video.
.
1. In Idle mode, press [Centre]
Play a video
and select File manager
Videos
2. Select the video you want.
→
→
.
.
4. For Files, press [Centre] to
select the files you want and
press <Add>.
5. Press <Back> to return to
the media player screen.
15
Step outside the phone
Play games
1. From the media player
screen, press [Centre].
Play media files
1. In Idle mode, press [Centre]
and select File manager
Games & More a game.
Select a game
2. Select the file you want.
→
3. During playback, use the
following keys:
→
2. Press any key except for [
to launch the game.
]
•
Centre: pauses or
resumes playback.
•
Left: returns to the
previous file. Moves
backward in a file when
held down.
1. Select PLAY
.
Play
Powerinlinex
2. Select a character.
3. Press <OK> to start a game.
•
Right: skips to the next
file. Moves forward in a
file when held down.
Up: opens the play list.
Down: stops playback.
/ : adjusts the volume.
4. Press [Up] to make the
character start.
5. Press the Navigation keys to
change the direction.
•
•
•
1. Select GAME START
.
Play
TheLastAge
2. Select New Game
.
3. Press <SKIP> then <OK>.
4. Press [Up] to make the
machine move forward.
5. Press the Navigation keys to
change the direction.
16
Browse the web
Use Contacts
Using a built-in web browser, you can easily access
the wireless web to get a variety of up-to-date
services and information and to download web
content.
To the phone’s memory:
Add an entry
1. In Idle mode, enter a phone
number.
2. Press <Options> and select
In Idle mode, press [Centre] and
Launch the
web browser
Save to Contacts
→
Phone
select Internet
homepage
→
Go to
→
New a number type.
→
.
3. Specify contact information:
First name, Last name, Work
Email, Home Email, Group,
Homepage, Birthday, and
More information (Job title,
Department, Company,
•
•
•
•
To scroll through browser
items, press [Up] or [Down].
Navigate the
web
To select an item, press
[Centre].
To return to the previous
page, press <Back>.
Nickname, and Notes).
4. Press <Options> and select
To move to the next page,
press <Options> and select
Save to save the contact.
Forward
To access options, press
Options>.
.
•
<
17
Step outside the phone
To the USIM/SIM card:
1. In Idle mode, press [Centre]
and select Contacts My
name card
Create and
send your
name card
Add an entry
(continued)
→
1. In Idle mode, enter a phone
number.
.
2. Specify your contact
information.
2. Press <Options> and select
Save to Contacts
New
→
SIM
→
.
3. Press <Options> and select
Save to save the name card.
3. Specify contact information,
depending on your card type:
Name, Phone number, Group,
and Location number.
4. To send the name card,
access My name card again.
5. Press <Options> and select
4. Press <Save> to save the
Send name card
sending method.
→
a
contact.
Send messages
1. In Idle mode, press
Find an entry
<Contacts>.
2. Enter the first few letters of
the name you want.
1. In Idle mode, press [Centre]
and select Messages
Create new Text
message
Send a text
message (SMS)
→
→
3. Select a contact.
.
4. Scroll to a number and press
2. Enter the message text and
press [Centre].
[
] to dial, or press [Centre]
to edit contact information.
3. Enter destination numbers.
4. Press [Centre] to send the
message.
18
1. In Idle mode, press [Centre]
and select Messages
Create new Multimedia
message
2. Enter the message subject.
3. Select Text
1. In Idle mode, press [Centre]
and select Messages
Create new File
messenger
Send a
Send files by
MMS
→
→
multimedia
message
(MMS)
→
→
.
.
2. Enter the message subject.
3. Move to the Message field.
4. Enter the message text.
.
4. Enter the message text and
press [Centre].
5. Move to the Attach files line.
5. Select Picture or Video, or
6. Press <Options> and select
Audio
.
Add files
,
Add name card,
6. Add an image, a video, or a
sound file.
or Add v-calendar
.
7. Select an image, a video, a
sound, a name card, or a
schedule item.
7. Press <Options> and select
Send
.
8. Enter destination numbers or
addresses.
8. Press <Options> and select
Attach
.
9. Press [Centre] to send the
message.
9. Press [Centre].
10.Enter destination numbers or
addresses.
11.Press [Centre] to send the
message.
19
Step outside the phone
View messages
1. In Idle mode, press [Centre]
Send an e-mail
and select Messages
Create new Email
→
.
When a notification appears:
→
View a text
message
1. Press <View>.
2. Enter the e-mail subject.
3. Move to the Message field.
4. Enter the e-mail text.
2. Select the message from the
Inbox.
From the Inbox:
5. Move to the Attach files line.
1. In Idle mode, press [Centre]
6. Press <Options> and select
and select Messages
Inbox
2. Select an SMS message
).
→
Add files
or Add v-calendar
,
Add name card,
.
.
7. Select images, videos,
sounds, name cards,
(
schedule items, or tasks.
When a notification appears:
View a
multimedia
message
8. Press <Options> and select
Attach
1. Press <View>.
.
2. Select the message from the
Inbox.
9. Press [Centre].
10.Enter e-mail addresses.
From the Inbox:
11.Press [Centre] to send the
e-mail.
1. In Idle mode, press [Centre]
and select Messages
Inbox
2. Select an MMS message
).
→
.
(
20
Use Bluetooth
1. In Idle mode, press [Centre]
View an e-mail
Your phone is equipped with Bluetooth technology,
enabling you to connect the phone wirelessly to
other Bluetooth devices and exchange data with
them, talk hands-free, or control the phone
remotely.
and select Messages
Email inbox
→
.
2. Press <Options> and select
Download to download new
e-mails or headers.
3. Select an e-mail or a header.
In Idle mode, press [Centre] and
Turn on
Bluetooth
select Settings
Bluetooth
On
→
Connectivity
4. If you selected a header,
press <Options> and select
Retrieve to view the body of
the e-mail.
→
→
Activation
→
.
1. In Idle mode, press [Centre]
and select Settings
Search for and
pair with a
Bluetooth
device
→
Connectivity
My devices
new device
2. Select a device.
→
Bluetooth
→ Search
→
.
3. Enter a Bluetooth PIN code or
the other device’s Bluetooth
PIN code, if it has, and press
<OK>.
When the owner of the other
device enters the same code,
the pairing is complete.
21
Step outside the phone
Switch applications
You can switch to other applications from a menu,
without closing the menu screen you were using.
1. Access an application,
Contacts File manager, or
Organiser
Send data
,
.
2. Select an item.
1. While using a menu, press
Switch to an
application
3. Press <Options> and select
[
].
Send
schedule
bluetooth
(name card/
2. Select an application.
/task
)
→
Via
.
•
•
•
Call: opens the dialling
screen.
Available
applications
4. Select a device.
5. If necessary, enter the
Bluetooth PIN and press
Messages: accesses the
Messages menu.
<OK>.
Internet: launches the web
browser.
To receive data via Bluetooth,
your phone’s Bluetooth feature
must be active and its visibility
must be enabled.
Receive data
1. Press
[
].
Close all
running
applications
2. Scroll to End all?.
3. Press <Yes>.
If necessary, press <Yes> to
confirm that you are willing to
receive.
22
2. Enter the whole word before editing or deleting
characters.
Enter text
3. When the word displays correctly, go to step 4.
ABC, T9, Number, and Symbol mode
Otherwise, press [
choices for the keys that you have pressed.
For example, Of and Me use [ ] and [ ].
0] to display alternative word
You can enter text for some features such as
Messages, Contacts, or Organiser, using ABC mode,
T9 mode, Number mode, and Symbol mode.
6
3
4. Press [ ] to insert a space and enter the next
word.
Changing the text input mode
The text input mode indicator displays when the
cursor is in a text input field.
Other T9 mode operations
•
Press [1] to enter periods or apostrophes
automatically.
•
•
•
Press and hold [ ] to switch between T9 (
and ABC ( ) modes.
)
•
•
Press the Navigation keys to move the cursor.
Press [ ] to change case (
to switch to Number mode (
/
/
) or
Press [
C
] to delete characters one by one. Press
).
and hold [
C] to clear the entire display.
Press and hold [ ] to switch to Symbol mode
).
Adding a new word to the T9 dictionary
(
This feature may not be available for some
languages.
Using T9 mode
1. Enter the word that you want to add.
T9 is a predictive text input mode that allows you to
key in any character using single keystrokes.
2. Press [0] to display alternative words for your
key presses. When there are no more alternative
words, Spell displays on the bottom line.
Entering a word in T9 mode
1. Press [
each key once for each letter.
For example, press [ ], [ ], [
enter Hello in T9 mode.
2] to [9] to start entering a word. Press
3. Press <Spell>.
4. Enter the word you want using ABC mode and
4
3
5], [5], and [6] to
press <Add>.
T9 predicts the word that you are typing, and it
may change with each key that you press.
23
Enter text
Using ABC mode
Using Number mode
Press the appropriate key until the character you
want appears on the screen.
Number mode enables you to enter numbers.
Press the keys corresponding to the digits you want.
Characters in order displayed
Key
Using Symbol mode
Upper case
Lower case
Symbol mode enables you to insert symbols.
To
Press
display more symbols
select a symbol
[Up] or [Down].
the corresponding
number key.
clear the entered symbols
insert the symbols
[
C
].
<
OK>.
(Creating an SMS message with GSM alphabet encoding)
Other ABC mode operations
•
To enter the same letter twice or to enter a
different letter on the same key, wait for the
cursor to move to the right automatically or
press [Right]. Then, enter the next letter.
•
•
•
Press [ ] to insert a space.
Press the Navigation keys to move the cursor.
Press [
and hold [
C
] to delete characters one by one. Press
C] to clear the entire display.
24
Making a call from Contacts
Call functions
Advanced calling features
Once you have stored a number in Contacts, you can
dial the number by selecting it from Contacts.
ꢀp. 31
Making a call
1. In Idle mode, enter the area code and phone
number.
You can also use the speed dial feature to assign
your most frequently dialled numbers to specific
number keys.ꢀp. 33
• Press [
and hold [
C
] to clear the last digit or press
You can quickly dial a number from the USIM/SIM
card using the location number assigned when
stored.
C] to clear the whole display.
You can move the cursor to edit an
incorrect digit.
Press and hold [ ] to enter a pause
between numbers.
1. In Idle mode, enter a location number and press
•
[
].
2. Scroll through other numbers, if necessary.
2. Press [ ].
3. Press <Call> or [ ] to make a voice call, or
3. To end the call, press [ ].
<V-Call> to make a video call.
Making an international call
1. In Idle mode, press and hold [
Answering a call
When you receive an incoming call, the phone rings
and displays the incoming call image.
0]. The
+
character appears.
2. Enter the country code, area code, and phone
number, then press [ ].
Press <Accept> or [ ] to answer the call.
Tips for answering a call
Redialling recent numbers
•
When Anykey answer is active, you can press
any key to answer a call, except for <Reject
and [ ]. p. 68
Press <Reject> or [ ] to reject a call.
1. In Idle mode, press [ ] to display the list of
recent numbers.
>
ꢀ
2. Scroll to the number you want and press [ ].
•
25
Call functions
•
Press and hold [ / ] to reject an incoming call
or mute the ringer, depending on the Volume
key setting. p. 69
Options during a call
You can access a number of functions during a call.
ꢀ
Adjusting the volume during a call
Use [ / ] to adjust the earpiece volume during a
call.
Viewing missed calls
If you have missed calls, the screen displays how
many calls you have missed.
Press [ ] to increase the volume level and [ ] to
decrease the volume level.
1. Press <View>.
2. If necessary, scroll through the missed calls.
3. Press [ ] to dial the number you want.
Placing a call on hold/Retrieving
Press <Hold> or <Unhold> to place the call on
hold or retrieve the call.
Using the headset
Use the headset to make or answer calls without
holding the phone.
Making a second call
You can make another call if your network supports
this function.
Connect the headset to the jack on the right side of
the phone. The button on the headset works as
follows:
1. Press <Hold> to put the call on hold.
2. Make the second call in the normal way.
3. Press <Swap> to switch between the calls.
To
Press
redial the last call
answer a call
end a call
and hold the button twice.
and hold the button.
and hold the button.
4. Press <Options> and select Drop
→
Drop held
call to end the call on hold.
5. To end the current call, press [ ].
Answering a second call
You can answer an incoming call while already on
the phone, if your network supports this function
and you have activated the call waiting feature.
ꢀp. 71
26
1. Press [ ] to answer the call. The first call is
automatically put on hold.
•
•
Contacts: access the contact list.
Send text message: create a new SMS
2. Press <Swap> to switch between the calls.
message.
3. Press <Options> and select Drop
→
Drop held
•
Send DTMF: send the DTMF (Dual tone multi-
frequency) tones as a group. The DTMF tones are
the tones used in phones for tone dialling,
sounding when you press the number keys. This
option is helpful for entering a password or an
account number when you call an automated
system, like a banking service.
call to end the call on hold.
4. To end the current call, press [ ].
Using the speakerphone feature
Use the speaker feature to talk and listen with the
phone a short distance away.
•
•
Memo: create a memo.
Press [Centre] and then <Yes> to activate the
speakerphone feature. Press [Centre] again to
switch back to the earpiece.
Transfer: transfer the currently active call to a
caller on hold. The two callers can talk to each
other, but you are disconnected from the call.
Using In-call options
Press <Options> to access the following options
during a call:
•
•
Join: set up a multi-party call by adding a caller
on hold to a currently active call. You can include
up to 5 people on a multi-party call.
Split: have a private conversation with one
multi-party call participant. The other
participants can converse with each other. After
the private conversation, select Join to return
both all private participants to the multi-party
call.
•
•
•
Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or back to the
phone.
•
•
•
Drop: disconnect the call currently on hold or
active call.
Mute/Unmute: switch off the phone's
microphone so that the other person on the
phone cannot hear you, or switch it back on.
Drop call: disconnect one multi-party call
participant.
•
•
Mute key tone/Unmute key tone: turn the
key tones off or on.
End call: disconnect the call currently on hold,
active call, or all calls.
New call: make a new call.
27
Call functions
•
•
•
Mute camera: turn off the camera.
Using the video call feature
Mute voice: turn off the microphone.
In a 3G (UMTS) service area, your phone can make
or receive a video call, allowing you to see the other
person on the screen during a conversation. The
other person’s phone must support the video call
feature.
Mute camera & voice: turn off the camera and
the microphone.
•
Mute key tone/Unmute key tone: turn the
key tones off or on.
•
•
Zoom: display or hide the zoom control bar.
Making a video call
1. In Idle mode, enter the area code and phone
number.
Brightness/Hide brightness: display or hide
the brightness control bar.
•
•
Effects: change the colour tone of the image.
2. Press [ ]. The other person appears on the
screen when he/she accepts.
Hide information/Show information: hide or
display information about the video call.
Answering a video call
•
Send DTMF: send Dual tone multi-frequency
(DTMF) tones as a group after entering the entire
number you need to send or retrieving a number
from Contacts.
When you receive a video call, answer as you would
when receiving a voice call. Press <Show me> to
allow the caller to see you.
•
•
Video quality: change the image quality of the
camera.
Using video call options
During a video call, press <Options> to access the
following options:
End call: end the video call.
•
Loudspeaker/Loudspeaker off: turn on the
speakerphone feature or switch back to Normal
mode.
•
Switch to headset/Switch to phone: switch
the call to a Bluetooth headset or back to the
phone. To use this feature, you first need to
connect your headset to the phone.
ꢀp. 72
28
•
•
•
•
Video call: make a video call to the number, if
the 3G service is available.
Menu functions
All menu options listed
Use number: paste the selected number to the
normal dialling screen.
Save to Contacts: save the selected number in
Contacts.
Call log (Menu 1)
The Call log menu enables you to view the calls you
have dialled, received, or missed, the length of the
calls, and the cost of your calls.
Send message: send a message to the selected
number using SMS, MMS, or File messenger.
•
•
Delete: delete the call record.
To access this menu, press [Centre] in Idle mode
Delete all: delete all records.
and select Call log
.
Dialled calls (Menu 1.2)
Missed calls (Menu 1.1)
This menu displays the most recent calls you have
dialled.
This menu displays the most recently received calls
that you did not answer.
Received calls (Menu 1.3)
Accessing a call record
This menu displays the most recent calls you have
received.
1. Scroll to the name or number you want. The call
list also shows the call repetition.
2. Press [ ] to dial the number, or press [Centre]
to view the details of a call.
Current contacts (Menu 1.4)
This menu displays all of the contacts you have
dialled, received, or missed.
Using call record options
From the call list, press <Options> to access the
following options:
Delete all (Menu 1.5)
•
Details: access information about the selected
call record.
Use this menu to delete all of the records in each call
type.
•
Voice call: make a voice call to the number.
1. Press [Centre] to select the call types to be
cleared.
29
Menu functions
2. Press <Delete>.
•
Max cost: check the maximum cost set.
3. Press <Yes> to confirm the deletion.
Press <Options> to access the following options:
If the phone is locked, it will require the
password. The password is preset to
00000000. You can change this password.
•
•
Reset call cost: reset the cost counters.
Edit cost limit: set the maximum cost
authorised for your calls.
ꢀp. 76
•
applied when the cost of your call is calculated.
Data calls (Menu 1.6)
Calls time (Menu 1.8)
Use this menu to view the total amount of sent or
received data.
This menu displays the time log for voice and video
calls made and received. The actual time invoiced by
your service provider will vary.
To reset a counter or all counters, press <Options
>
and select Reset or Reset all
.
•
•
•
•
Total dialled: check the total length of voice
calls dialled.
If the phone is locked, it will require the
password. The password is preset to
00000000. You can change this password.
Total received: check the total length of
voice calls received.
ꢀp. 76
Total dialled: check the total length of video
calls dialled.
Calls cost (Menu 1.7)
Total received: check the total length of
video calls received.
This network feature displays the cost of calls. This
menu is available only if your USIM/SIM card
supports this feature. Note that this is not intended
to be used for billing purposes.
To reset a counter or all counters, press <Options
and select Reset or Reset all
>
.
•
Total costs: check the total cost of all your
calls. If the total cost exceeds the maximum cost
set in Edit cost limit, you must reset the
counter before you can make another call.
If the phone is locked, it will require the
password. The password is preset to
00000000. You can change this password.
ꢀp. 76
•
Last call cost: check the cost of your last call.
30
Ringtone: assign a ringtone to alert you to a call
from the person.
Contacts (Menu 2)
You can store phone numbers on your USIM/SIM
card and in your phone’s memory. The USIM/SIM
card and phone’s memory are physically separate,
but they are used as a single entity called Contacts.
Msg. alert tone: select a ringtone to alert you
to an incoming message from the person.
•
•
•
Add to speed dial: set the selected number as
a speed dial number.
To access this menu, press [Centre] in Idle mode
Video call: make a video call to the number, if
the 3G service is available.
and select Contacts
.
Copy to SIM/Copy to phone: copy the contact
from the phone’s memory to the USIM/SIM card,
or vice versa.
Search contact (Menu 2.1)
Use this menu to search for numbers in Contacts.
Finding an entry
1. Enter the first few letters of the name that you
want to find.
•
•
•
Send name card: send the contact details via
SMS, e-mail, File messenger, or Bluetooth.
Use number: paste the selected number to the
normal dialling screen.
2. Select a contact from the list.
Delete: delete the contact.
3. Scroll to a number and press [ ] to dial, or
press [Centre] to edit contact information.
New contact (Menu 2.2)
Using contact options
Use this menu to add a new contact to Contacts.
While viewing contact details, press <Options> to
access the following options:
Storing a number in the phone’s memory
1. Select Phone
.
•
•
Edit: edit contact information.
2. Change the settings or enter information about
the contact.
Send message: send a message to the selected
number or to the selected e-mail address via
SMS, MMS, or File messenger.
•
•
•
First name/Last name: assign a name.
•
Special options: set the following options:
Phone number: add a number in any type.
Work Email: assign a business e-mail
address.
Picture: assign a caller ID image to alert you to
a call from the person.
31
Menu functions
•
Home Email: assign a personal e-mail
address.
•
•
Group (for USIM): assign a caller group.
Location number: assign a location
number.
•
•
•
•
Group: assign a caller group.
Homepage: enter a homepage address.
Birthday: enter the person’s birthday.
More information: enter the job title,
department, company, nickname, and
additional note of the person.
When you are using a USIM card, press
<Options> and select Add item to enter
additional numbers.
3. Press <Save> to save the contact.
3. Press <Options> and select Special options to
Groups (Menu 2.3)
add additional information:
Use this menu to organise your contacts in caller
groups.
•
•
•
Picture: assign a caller ID image to alert you
to a call from the person.
Ringtone: assign a ringtone to alert you to a
call from the person.
Msg. alert tone: select a ringtone to alert
you to an incoming message from the
person.
Creating a caller group
1. Press <Options> and select Add group
.
2. Enter a name for the group.
3. Press <Save> to save the group.
4. Press <Options> and select Save to save the
Adding members to a caller group
1. Select a group.
contact.
2. Press [Centre] to select the contacts to be
added.
Storing a number on the USIM/SIM card
1. Select SIM
.
3. Press <Save>.
2. Change the settings or enter information about
the contact:
•
•
•
Name: assign a name.
Phone number: enter a phone number.
Email (for USIM): assign an e-mail address.
32
•
•
Add: assign a number to an unassigned key.
Managing caller groups
Details: check the name and number assigned
to a key.
From the group list, press <Options> to access the
following options:
•
Video call: make a video call to the number, if
the 3G service is available.
•
•
View members: display the members of the
selected group.
•
•
Change: assign a different number to a key.
Add member: add members to the selected
group, if the group does not have any.
Remove: clear the speed dial setting for a key.
•
•
•
Add group: add a new group.
Dialling speed dial entries
Rename group: change the group name.
In Idle mode, press and hold the appropriate key.
Delete group: delete the selected group. Group
members, however, will not be deleted from
Contacts.
My name card (Menu 2.5)
Use this menu to create a name card and send it to
other people.
•
Delete all groups: delete all groups including
default groups.
Saving your name card
Speed dial (Menu 2.4)
The procedure for creating your name card is the
same as the one for saving a phone number in the
Use this menu to assign a speed dial number (2 to
9) for 8 of your most frequently dialled numbers.
phone’s memory.ꢀp. 31
Assigning speed dial numbers
Using name card options
1. Select a key location from
2
to
9
. Key
1
is
After saving your name card, press <Options> to
access the following options:
reserved for your voicemail server.
2. Select a contact from the contact list.
3. Select a number.
•
•
Edit: edit the name card.
Send name card: send the name card via SMS,
e-mail, File messenger, or Bluetooth.
Managing speed dial entries
•
Delete: delete the name card.
While viewing the Speed dial screen, press
Options> to access the following options:
<
33
Menu functions
•
Default storage settings: select a default
memory location to save contacts. If you select
Optionally, the phone will ask you to select a
memory location each time you save a number.
Copy all (Menu 2.6)
Use this menu to copy all of the contacts stored on
the USIM/SIM card to the phone’s memory, or vice
versa.
Memory status (Menu 2.0)
Own number (Menu 2.7)
Use this menu to view the number of contacts you
have stored in the phone’s memory and on the
USIM/SIM card.
Use this feature to check your phone numbers, or to
assign a name to each of the numbers. Changes
made here do not affect the actual subscriber
numbers on your USIM/SIM card.
Applications (Menu 3)
Use this menu to play media files, to record voice
memos, to set time zone, or to use the phone as a
calculator or converter.
Service number (Menu 2.8)
This option is available if your USIM/SIM card
supports Service Dialling Numbers (SDN). Use this
menu to view the list of SDNs assigned by your
service provider, including emergency numbers,
directory enquiries, and voicemail numbers.
To access this menu, press [Centre] in Idle mode
and select Applications
.
1. Scroll to the number you want.
SAT (Menu 3.1)
2. Press <Call> or [ ].
This menu is available if you use a USIM/SIM card
that supports SIM Application Toolkit menus and
provides additional services, such as news, weather,
sports, entertainment, and location services.
Available services may vary, depending on your
service provider’s plans.
Settings (Menu 2.9)
Use this menu to change the default settings for
Contacts entries.
•
Viewing settings: select whether the contact
list is sorted by last name or by first name.
For details, see your USIM/SIM card instructions or
contact your service provider.
34
Playing media files
Media player (Menu 3.2)
1. From the media player screen, press [Centre].
You can enjoy music and video files from the phone’s
memory. First, you need to save files to your
phone’s memory.
2. Select a file. The selected file plays.
During playback, use the following keys:
Downloading or receiving media files
Key
Function
You can play the following types of files on your
phone.
Centre
Left
Returns to the previous file. Moves
backward in a file when held down.
•
•
Music: MP3, AAC, WMA, M4A, MP4, 3GA, WAV
Video: MP4, 3GP
Right
Skips to the next file. Skips forward in a
file when held down.
Use the following methods to save music or video
files to your phone:
Up
Opens the play list.
Stops playback.
•
•
Download from the wireless web
Download from a computer using the optional
ꢀp. 39
Down
/
Samsung PC StudioꢀSamsung PC Studio User’s
Adjusts the volume.
Guide
•
Receive via an active Bluetooth connection
p. 73
Using media player options
ꢀ
From the media player screen, press <Options> to
access the following options:
Creating the play list
1. From the media player screen, press [Centre].
•
•
•
•
Play: begin playback.
Pause Resume: pause or resume playback.
2. Press <Options> and select Add
.
/
3. Select Folder or Files
.
Stop: stop playback.
4. Press [Centre] to select the files you want or
scroll to the folder you want.
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
5. Press <Add> or <Select>.
•
Open play list: display the play list.
6. Press <Back> to return to the media player
screen.
35
Menu functions
•
•
Activate key: get a new licence key when the
key for the selected DRM file expires.
•
Key management: manage the licence keys
you have acquired.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
Using play list options
From the media player screen, press [Up] to access
the play list and press <Options> to access the
following options:
•
•
•
•
Go to File Manager: access all media files in
the phone’s memory.
•
•
•
Play: play the currently selected file.
Hidden from Bluetooth: hide the file so that
other bluetooth devices cannot access it.
Add: add files or a folder to the play list.
Remove: remove the selected file or all files
from the current play list.
Visible to Bluetooth: share the file with other
Bluetooth devices.
•
•
Move: move the selected file to the position you
want within the current play list or another play
list.
Show controller/Hide controller: display or
hide the controller image. This option may not be
shown depending on the playback animation
setting.
Copy: make a copy of the selected file in the
current play list or another play list.
•
•
Details: access the file properties.
•
•
Delete list: delete the current play list.
Player settings: change the default settings for
playing media files.
Rename list: change the name of the current
play list.
Play options: select a repeat mode.
•
New list: add a new play list.
Volume: select a volume level.
Controller: set the media player to display or
hide the controller image.
Voice recorder (Menu 3.3)
Use this menu to record voice memos.
Audio player skin: select a skin image.
•
VOD settings: select a connection profile to be
used for accessing a video streaming server. You
Recording a voice memo
1. Press [Centre] to start recording.
2. Speak into the microphone.
can also create or edit a profile.
ꢀp. 74
Press [Centre] to pause or resume the recording.
36
3. Press <Stop> or [Down] to end recording. The
•
•
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
voice memo is saved automatically.
Playing a voice memo
1. From the voice recorder screen, press
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
<Options> and select Go to sounds.
•
•
•
•
Go to sounds: access the Voice memos folder.
Delete: delete the selected voice memo.
2. Select a voice memo. The selected memo plays.
During playback, use the following keys:
Rename: change the name of the voice memo.
Key
Centre
Left
Function
Hidden from Bluetooth: hide the voice memo
so that other Bluetooth devices cannot access it.
Pauses or resumes playback.
Moves backward in a file.
Moves forward in a file.
Stops playback.
•
•
•
Visible to Bluetooth: share the voice memo
with other Bluetooth devices.
Right
Down
/
Details: access the properties of the voice
memo.
Record settings: change the default settings
for recording a voice memo.
Adjusts the volume.
Default name: change the default prefix of the
file names.
Using voice memo options
From the player screen, press <Options> to access
the following options:
Recording time: select a maximum recording
time.
•
Play/Resume: play the voice memo or resume
playback.
•
Key management: manage the licence keys
you have acquired.
•
•
•
Stop: stop playback.
Record: record a new voice memo.
Activate key: get a new licence key when the
key for the selected DRM file expires.
37
Menu functions
World clock (Menu 3.4)
Calculator (Menu 3.5)
Use this menu to set your local time zone and find
out the current time in another part of the world.
Use this menu to perform basic arithmetic functions,
such as addition, subtraction, multiplication, and
division.
Setting your local time zone
Performing a calculation
1. From the world map, press [Left] or [Right] to
scroll to the city you want on the upper line. As
the time line moves, the time and date of the
given zone display.
1. Enter the first number.
Press [ ] to include a decimal point.
2. Press one of the Navigation keys to access the
math function you want.
2. Press [Centre] to save the city as your local time
zone.
3. Enter the second number.
4. Press [Centre] to view the result.
Viewing and setting a foreign time zone
1. From the world map, move to the lower line.
5. If necessary, repeat from step 2 to continue the
calculation.
2. Press [Left] or [Right] to scroll to the city you
want.
Using calculator options
Press <Options> to access the following options:
3. Press [Centre] to save the time zone.
•
•
Equal: view the result.
Applying Daylight Savings Time
1. From the world map, press <Options> and
Recent calculation: display the last result you
calculated.
select Summer time
.
•
Save to memory: save a value into the
calculator memory.
2. Press [Centre] to select the time zones you
want.
•
•
Recall memory: retrieve the saved value.
3. Press <Select>.
Clear memory: clear the saved value.
4. Press [Centre].
38
Converter (Menu 3.6)
Internet (Menu 4)
Use this menu for common conversions, such as
currency and temperature.
The Wireless Application Protocol (WAP) browser on
your phone allows you to access the wireless web.
From the wireless web, you can access up-to-the-
minute information and a wide variety of media
content, such as wallpapers, ringtones, and music
files.
Performing a conversion
1. Select a converter.
2. Press [Left] or [Right] to select the original unit
and press [Down].
To access this menu, press [Centre] in Idle mode
3. Enter the value to be converted and press
[Down].
and select Internet
.
•
•
Press [ ] to insert a decimal point.
Press [ ] to change the temperature to
above zero (+) or below zero (-).
Go to homepage (Menu 4.1)
Use this menu to connect your phone to the network
and load the homepage of the wireless web service
provider.
4. Press [Left] or [Right] to select the unit to which
you want to convert.
Navigating the web browser
The equivalent value for the amount you entered
displays.
To
Press
Using converter options
scroll through browser items
select a browser item
return to the previous page
move to the next page
[Up] or [Down].
[Centre].
Press <Options> to access the following options:
•
•
•
Clear: clear the current values.
<
Back>.
Reverse: reverse the conversion.
Currency rates: display the currency rate list.
<
Options> and
select Forward
.
Using browser menu options
From any web page, press <Options> to access the
following options:
•
Select: access the linked web page.
39
Menu functions
•
•
•
•
Go to homepage: return to the homepage.
Network settings: select a connection profile
to be used for accessing the wireless web. You
Forward: move to the next page.
can also create or edit a profile.ꢀp. 74
Enter URL: enter a URL address manually.
About...: access version and copyright
information about the web browser.
Reload: reload the current page with updated
information.
•
•
•
Add favorite: bookmark the current page.
Exiting the web browser
Favourites: access the bookmark list.
Press [ ] to end the network connection and exit
the browser.
History: access the list of web pages you have
accessed.
Enter URL (Menu 4.2)
•
Send link: send the URL of the current page via
SMS, e-mail, or file messenger.
Use this menu to manually enter a URL address and
access the associated web page.
•
•
Save: save the selected image or page.
Advanced: clear browser information and
access the browser settings.
Favourites (Menu 4.3)
Use this menu to save URL addresses in order to
quickly access web pages, or access the preset
bookmarks.
Search text: search for a specific word or
phrase from the current web page.
Clear history: delete the URLs stored in the
history.
Adding a bookmark folder
1. Press <Options> and select New
Clear cookies: delete cookies. Cookies are
pieces of personal information sent to a web
server while navigating the web.
→
Folder
.
2. Enter a name for the folder and press <OK>.
Adding a new bookmark
1. Press <Options> and select New
Clear cache: clear the cache. The cache is a
temporary memory site that stores recently
accessed web pages.
→
Favourite.
2. Enter a URL address and press [Centre].
Details: access the page properties.
3. Enter a title for the bookmark and press <OK>.
Browser settings: change the settings for
browser display, security, and certificates.
4. Press <Options> and select OK to save the
item.
40
Accessing a bookmarked page
Browser settings (Menu 4.5)
Selecting a bookmark item launches the web
browser and accesses the associated web page.
Use this menu to change the settings for browser
display, security, and certificates.
Using bookmark options
Network settings (Menu 4.6)
From the Favourites screen, press <Options> to
access the following options:
Use this menu to select a connection profile to be
used for connecting to the Internet. You can also
•
•
Open: open the selected folder.
create or edit a profile.ꢀp. 74
Select: access the page of the selected
bookmark.
Messages (Menu 5)
•
•
Details: access the bookmark properties.
Send link: send the bookmark via SMS, e-mail,
or file messenger.
Use the Messages menu to send and receive text
messages, multimedia messages, and e-mails. You
can also use configuration message, push message,
voicemail, and cell broadcast message features.
•
•
•
•
•
New: add a new bookmark or folder.
Edit: edit the selected bookmark.
To access this menu, press [Centre] in Idle mode
Move: move the bookmark to another folder.
Rename: change the folder name.
and select Messages
.
Delete: delete the selected bookmarks or
folders.
Create new (Menu 5.1)
Use this menu to create and send messages.
History (Menu 4.4)
Text message (Menu 5.1.1)
You can access the list of pages you have accessed
recently.
Short Message Service (SMS) allows you to send or
receive text messages.
Select a URL from the list to access the
corresponding web page.
41
Menu functions
1. Enter your message.
1. Enter the message subject.
The maximum number of characters
2. Select the Text line.
allowed in a message varies by service
provider. If your message exceeds the
maximum number of characters, the phone
will split the message.
3. Enter the message text and press [Centre].
4. Select the Picture or Video or Audio line.
5. Select an image, a video, or a sound file and
press <Add>. If necessary, press <Options
>
2. Press <Options> to access the following
and select Add
.
options:
• The maximum size allowed for a message
can differ, depending on your service
provider.
• Depending on the file type or DRM
(Digital Rights Management) system,
some files may not be able to be
forwarded.
•
•
•
Send: send the message.
Input method: change the text input mode.
Input language: change the language to be
used in T9 input mode.
Insert: retrieve a text template, contact
entry, or bookmark.
•
•
Save to Drafts: save the message in the
Drafts box.
6. Press <Options> to access the following
options:
3. When you have finished, press [Centre].
4. Enter a destination number.
•
•
Send: send the message.
Preview: view the message as it will be
shown on the recipient’s phone.
Input method: change the text input mode.
Input language: change the language to be
used in T9 input mode.
To send the message to more than one recipient,
fill in additional destination fields.
•
•
5. Press [Centre] to send the message.
Multimedia message (Menu 5.1.2)
•
Insert text template: retrieve a text
template.
Multimedia Message Service (MMS) delivers
messages containing a combination of text, image,
video, and audio, from phone to phone or from
phone to e-mail.
•
•
Edit text: edit the text of your message.
Change file: replace an added item.
42
•
•
•
•
Delete text
item.
Save to Drafts: save the message in the
Drafts box.
Add page: add pages. Move to each page by
pressing [Left] or [Right].
Move page: move the current page to the
next or previous page.
Delete page: delete an added page.
Edit style: change the page properties.
/
Delete file: delete an added
2. Move to the Message field and enter the
message text.
3. Move to the Attach files line and press
<
Options>.
4. Select Add files
v-calendar
5. Select the item you want to add, and press
Options> and select Attach
,
Add name card, or Add
.
<
.
•
•
6. Press <Options> to access the following
options:
This page: set the page duration and
change font colour and style for the selected
page.
•
•
•
Send: send the e-mail.
Input method: change the text input mode.
Input language: change the language to be
used in T9 input mode.
Insert text template: retrieve a text
template.
Insert: retrieve a text template, contact
entry, or bookmark.
Attached file list: display the file list you
attached.
All page: change the background colour and
page layout.
•
•
•
•
•
Save as template: save the message as a
template in the Multimedia templates
folder.
7. When you have finished, press [Centre].
8. Enter a phone number or an e-mail address.
Add name card: add a contact as a Vcard
format.
To send the message to more than one recipient,
fill in additional destination fields.
•
•
Add v-calendar: add a calendar memo.
Delete all attachments: delete all
attachments.
9. Press [Centre] to send the message.
File messenger (Menu 5.1.3)
Use this menu to send multiple media files by
attaching them to an MMS message.
•
Save to Drafts: save the message in the
Drafts box.
1. Enter the subject in the Subject line.
7. When you have finished, press [Centre].
43
Menu functions
8. Enter a phone number or an e-mail address.
•
•
Attached file list: display the file list you
attached.
Add name card: add a contact as a Vcard
format.
Add v-calendar: add a calendar memo.
Delete all attachments: delete all
attachments.
Save to Drafts: save the e-mail in the
Drafts box.
To send the message to more than one recipient,
fill in additional destination fields.
9. Press [Centre] to send the message.
•
•
Email (Menu 5.1.4)
You can create and receive e-mails that include text,
audio, and images.
•
1. Enter the e-mail subject.
7. When you have finished, press [Centre].
8. Enter an e-mail address.
2. Move to the Message field and enter the e-mail
text.
3. Move to the Attach files line and press
To send the e-mail to more than one recipient, fill
in additional destination fields.
<
Options>.
4. Select Add files
v-calendar
5. Select the item you want to add, and press
Options> and select Attach
,
Add name card, or Add
9. Press [Centre] to send the e-mail.
.
Inbox (Menu 5.2)
<
.
This folder stores all of the messages you have
received, except for e-mails.
6. Press <Options> to access the following
options:
Viewing a message
•
•
•
Send: send the e-mail.
The following icons may appear on the message list
to show the message type:
Input method: change the text input mode.
Input language: change the language to be
used in T9 input mode.
•
•
•
SMS
•
•
•
MMS
•
•
Insert text template: retrieve a text
template.
Insert: retrieve a text template, contact
entry, or bookmark.
MMS notification
Push message
Configuration
USIM/SIM
44
MMS messages
• Depending on the DRM (Digital Rights
Management)system,messageshavingweb
content may not be able to be forwarded.
•
•
Play: play the message.
Call Go to URL Go to RTSP: make a call to the
/
/
• A
!
icon next to a message means that the
selected number or access the selected web link.
message is of high priority. A grey-coloured
message icon indicates low priority.
•
•
•
Add to Favourites: save the selected web link
to the bookmark list.
Create email: send an e-mail to the selected
e-mail address.
Using message options
While viewing a message, press <Options> to
access the following options:
Create multimedia message: send an MMS
message to the selected e-mail address.
SMS messages
•
•
Reply: send a reply to the sender.
•
•
Call: make a call to the selected number.
Reply to all: send a reply to the sender and all
recipients.
Create email: send an e-mail to the selected
e-mail address.
•
•
•
Forward: forward the message to other people.
•
Reply: send a reply to the sender via SMS, MMS,
or File messenger.
Call back: make a call to the sender.
Save as template: save the message as a
template in the MMS templates folder.
•
•
•
Forward: forward the message to other people.
Call back: make a call to the sender.
•
•
Save files: save media content from the
message into your phone’s memory.
Save to Contacts: save the selected number or
e-mail address to Contacts.
Save to Contacts: save the selected number or
e-mail address to Contacts.
•
•
Move to SIM/Move to phone: move the
message between the USIM/SIM card and the
phone’s memory.
•
•
Delete: delete the message.
Details: access the message properties.
Delete: delete the message.
45
Menu functions
Configuration messages
The following icons are available to show the
message status:
•
Install: apply the configuration specified in the
message to your phone.
•
•
Being sent
•
Delete: delete the message.
Failed to be sent
Push messages
From the message list, press <Options> to access
the following options:
•
Go to URL: connect to the URL specified in the
message.
•
•
•
•
•
View: display the selected message.
Send again: resend the message.
Edit: edit the selected message.
•
Delete: delete the message.
Drafts (Menu 5.3)
Cancel sending: cancel sending the message.
This folder stores messages you have saved to send
at a later time.
Sort by: change the sort order of the message
list.
From the message list, press <Options> to access
the following options:
•
•
•
Delete: delete the message.
Delete all: delete all messages.
Details: access the message properties.
•
•
•
•
View: open the selected message.
Edit: edit the selected message.
Send: send the selected message.
Sent box (Menu 5.5)
Sort by: change the sort order of the message
list.
This folder stores messages that you have sent.
From the message list, press <Options> to access
the following options:
•
•
Delete: delete the selected message.
Delete all: delete all messages.
•
•
•
View: display the selected message.
Forward: forward the message to other people.
Outbox (Menu 5.4)
Sort by: change the sort order of the message
list.
This folder stores messages the phone is attempting
to send or has failed to send.
•
Delete: delete the message.
46
•
•
Delete all: delete all messages.
Using e-mail options
Details: access the message properties.
While viewing the e-mail or header, press
<
Options> to access the following options:
Email inbox (Menu 5.6)
•
Retrieve: retrieve the body of the e-mail from
the e-mail server.
This folder stores e-mails that you have received.
•
•
Reply: send a reply to the sender.
Viewing an e-mail
Reply to all: send a reply to the sender and all
of the other recipients.
1. Press <Options> and select Download. The
phone checks the e-mail server and downloads
new e-mails.
•
•
Forward: forward the e-mail to other people.
Save files: save the attached files from the
e-mail to your phone’s memory.
The following icons may appear on the list to
show the e-mail status:
•
•
Save to Contacts: save the selected number or
e-mail address to Contacts.
•
•
•
: Retrieved e-mail
: Retrieved e-mail with attachments
: E-mail not retrieved
Block: add the sender’s e-mail address or
subject to the Block list to reject e-mails from
that address or containing that subject.
• Depending on the DRM (Digital Rights
Management) system, messages having
web content may not be able to be
forwarded.
•
•
Delete from phone: delete the selected or all
e-mails from the phone.
Delete permanently: delete the selected
e-mail or all e-mails both from the phone and the
e-mail server.
• A
!
icon next to a message means that
the message is of high priority. A grey-
coloured message icon indicates low
priority.
•
Details: access the e-mail properties.
2. Select an e-mail or a header.
3. Press [ ] or [ ] to view other pages in the
e-mail.
4. Select an attached file to view or play it.
47
Menu functions
Media Album (Menu 5.7)
Multimedia templates (Menu 5.8.2)
You can create MMS templates so that you can use
them in composing an MMS message.
Use this menu to access the Media Album service,
with which you can organise your own online media
album, adding media content and messages via the
wireless web. This menu is only available if
supported by your service provider.
Creating a template
1. Press <New>, or press <Options> and select
New, if one has already been stored.
2. Create a template as you would when creating
an MMS message.
Templates (Menu 5.8)
Use this menu to make and use templates of
frequently used messages or passages.
3. Press <Options> and select Save as template
to save the template.
Text templates (Menu 5.8.1)
Using template options
You can create SMS templates with the sentences
you use frequently so that you can retrieve and
insert them when composing an SMS message.
From the template list, press <Options> to access
the following options:
•
•
•
•
•
•
View: open the template.
Creating a template
Send: send the template via MMS.
New: add a new template.
1. Press <New>, or press <Options> and select
New, if one has already been stored.
Edit: change the selected template.
Delete: delete the selected template.
Delete all: delete all templates.
2. Enter a message and press [Centre].
Using template options
From the template list, press <Options> to access
the following options:
Broadcast (Menu 5.9)
•
Send: send the template via SMS, MMS, File
messenger, or e-mail.
Your phone receives Cell Broadcast (CB) messages,
which are text messages related to various topics,
such as weather forecast, traffic, and news report,
from networks. Use this menu to access received
broadcast messages.
•
•
•
•
New: add a new template.
Edit: change the selected template.
Delete: delete the selected template.
Delete all: delete all templates.
48
Viewing a broadcast message
Settings (Menu 5.
)
All broadcast messages are stored in the
Temporary folder and will be deleted after a period
of time. If you do not want a message to be deleted,
save it to the Archive folder.
Use this menu to set up various options for using the
messaging service.
Text message (Menu 5. .1)
You can configure SMS settings.
Using message options
•
Settings x (where
number): set the properties of each profile.
x
is the setting profile
While viewing a message, press <Options> to
access the following options:
Centre address: store or change the number of
your SMS server.
•
Call/Go to URL/Go to RTSP: make a call to the
selected phone number or access the selected
web link.
Expiration: set the length of time your
messages are stored in the SMS server.
•
Create email: send an e-mail to the selected
e-mail address.
Default type: set the default message type. The
network can convert messages into the selected
format.
•
•
Save: save the message in the Archive folder.
Delete: delete the message.
Name: enter a profile name.
•
Sending settings: set up the options for
sending SMS messages:
Delete all (Menu 5.0)
Use this menu to delete messages in each message
folder all at once.
Reply path: allow recipients to reply to you
through your SMS server.
1. Press [Centre] to select the message types to be
cleared.
Delivery report: set the network to inform you
when your messages have been delivered.
2. Press <Delete>.
Network selection: select either CS preferred
(GSM) or PS preferred (GPRS), depending on
your network.
3. Press <Yes> to confirm the deletion.
Keep a copy: leave copies of your messages in
the Sent box folder after sending.
49
Menu functions
Character support: select a character encoding
Request delivery report: set the network to
inform you when your messages have been
delivered.
type. When you select Automatic, the phone
switches the encoding type from GSM alphabet
to Unicode if you enter a Unicode character. Use
of Unicode encoding will reduce the maximum
number of characters in a message to about half.
If this menu is not shown, your phone provides
automatic character encoding by default.
Request read report: send a read-reply
request along with you messages.
Keep a copy: leave copies of your messages in
the Sent box folder after sending.
Add my name card: allow your contact
information to be attached to your messages via
file messenger.
Multimedia message (Menu 5. .2)
You can configure MMS settings.
Add signature: attach a tag line to messages
via File messenger.
•
Sending options: set up the options for sending
MMS messages:
Input signature: edit your signature.
Priority: set the priority level of messages.
•
Receiving options: set up the options for
receiving MMS messages:
Expiration: set the length of time messages are
stored in the MMS server.
Home network: determine if your phone
retrieves new messages automatically when you
are in your home service area.
Custom time(Hour): enter the length of time
you want if you select Custom time in the
Expiration option.
Roaming network: determine if your phone
retrieves new messages automatically when you
are roaming on another network.
Delivery: set a time delay before messages are
sent.
Custom time(Hour): enter the length of time
you want if you select Custom time in the
Delivery option.
Reception within your home network or while
roaming has the following options:
-
Auto download: the phone automatically
retrieves messages from the server.
Hide address: set your address to be hidden
from the recipient’s phone.
-
Manual: the phone displays notifications. Use
the Retrieve option to manually download new
messages.
50
-
-
Restricted: the phone receives notifications
first from the server. When you attempt to
download messages, the phone informs you of
additional charges.
Restricted: you are not able to create and send
messages using unsupported file formats.
•
Slide interval: select the length of time the
display shows each page in a message.
Reject: the phone rejects all messages.
Email (Menu 5. .3)
Send delivery report: set the network to
inform the sender when a message has been
delivered to you.
You can configure e-mail settings.
You cannot change e-mail profile and account
settings while e-mails are being sent or
retrieved.
Send read report: determine whether or not
the phone sends a read-reply when an incoming
message has been read.
•
Sending options: set up the options for sending
e-mails:
Reject anonymous: reject messages from
unknown senders.
From: set the sender name.
Reject advertisement: reject advertisements.
Sending account: select the default e-mail
account.
•
•
•
MMS profiles: select a connection profile to be
used for MMS. You can also create or edit a
profile.
Priority: change the priority level of e-mails.
ꢀp. 74
Keep a copy: leave copies of your e-mails in the
Sent box folder after sending.
Message size: select the maximum file size of
MMS attachment. This file size may vary,
depending on your service provider.
Include body when replying: set whether or
not the phone includes the original e-mail text in
a reply.
Creation mode: select an MMS creation mode.
Warning: the phone informs you when you
create and send a message using unsupported
file formats.
Delivery report: set the network to inform you
when your e-mails have been delivered.
Add my name card: allow your contact
information to be attached to e-mails.
Free: you can create and send messages using
unsupported file formats.
Add signature: attach a tag line to new e-mails
or all e-mails including replies.
51
Menu functions
Input signature: edit your signature.
SMTP port: enter the SMTP port number.
•
Receiving options: set up the options for
receiving e-mails:
Use SSL: activate the use of SSL (Secured
Sockets Layer) protocol.
Set download limit: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Retrieving server type: select the protocol for
the incoming e-mail server. The remaining
options depend on the protocol type setting.
Auto polling: set the phone to automatically
check the e-mail server to download e-mails at
the specified intervals.
POP3 server/IMAP4 server: enter the IP
address or host name of the POP3 or IMAP4
server.
Polling frequency: set how often the phone
checks the e-mail server for automatic polling.
POP3 port/IMAP4 port: enter the POP3 or
IMAP4 port number.
Block address: specify e-mail addresses to
reject e-mails from those addresses, and
activate or deactivate mail blocking.
Use SSL: activate the use of SSL (Secured
Sockets Layer) protocol.
IMAP4 retrieving option: (IMAP4 protocol
only) set whether the phone retrieves only new
messages or all messages.
Block subject: reject e-mails which contain
subjects you specify, and activate or deactivate
mail blocking.
Retrieving option: set which part of e-mails
•
•
Email profiles: select a connection profile to be
used for sending and receiving e-mails. You can
the phone retrieves from the server.
Keep in server: leave copies of e-mails on the
e-mail server after retrieving.
also create or edit a profile.
Email accounts: set up an e-mail account and
select an account to be used. Press <Options
ꢀp. 74
My address: set your e-mail address.
>
User name: enter the POP3 or IMAP4 user
name.
and select Edit to access the following options
for setting up an account:
Password: enter the POP3 or IMAP4 password.
Account name: enter a name for the currently
selected account.
Use SMTP authentication: enable SMTP
authentication, which requires the user to log in
before sending e-mails.
SMTP server: enter the IP address or host
name of the outgoing e-mail server.
52
Same as POP3/IMAP4: select if you want the
SMTP server to have the same parameters as the
POP3 or IMAP4 server.
Memory status (Menu 5.
)
Use this menu to view the number of messages or
the amount of memory currently in use for each
message type in each folder.
User name: enter the SMTP user name.
Password: enter the SMTP password.
Voice mail (Menu 5. .4)
File manager (Menu 6)
The File manager menu allows you to access
images, videos, music files, and sound files stored in
the phone’s memory.
Use this menu to set the number of the voicemail
server.
You must store the voicemail server number
before accessing the server. Your service
provider can give you the number.
To access this menu, press [Centre] in Idle mode
and select File manager
.
Push message (Menu 5. .5)
Tips for Digital Rights Management
You can determine whether or not your phone
receives push messages.
As a result of the Digital Rights Management (DRM)
system, some of the media items you download
from the Internet or receive by MMS may require a
licence key to access them. You can acquire the key
from the website which owns the rights to the
content; use the Activate key option.
Broadcast (Menu 5. .6)
You can change the settings for receiving broadcast
messages.
•
Receive: select to receive broadcast messages,
or not.
Note the following icons on the list:
•
•
•
•
: Forwardable item with a valid key.
: Forwardable item without a valid key.
: Unforwardable item with a valid key.
: Unforwardable item without a valid key.
•
Channel: indicate the channels from which you
wish to receive broadcast messages.
When you select Respective channels, you can
set up a list of active broadcast channels.
Your service provider supports only count-based or
unlimited-access DRM files.
•
Language: select the preferred languages in
which broadcast messages display.
53
Menu functions
•
•
•
Cliparts: add an image clip to the photo.
Insert text: add text to the photo.
Rotate: rotate the photo clockwise or
counterclockwise.
Flip: flip the photo vertically or horizontally.
Crop: select a variously sized and shaped
section of the photo.
Images
Use this menu to access photos you have taken and
images you have downloaded, received in
messages, or imported from your computer.
•
•
Viewing an image
1. Scroll to an image folder.
2. Select an image.
4. When you have finished, press <Options> and
select Save as
.
Viewing a slide show
5. Enter a photo name and press <Save>.
You can view your images as a slide show, a
sequential presentation of each image in the current
folder.
Using image options
While viewing an image, press <Options> to access
1. Select an image folder.
the following options:
2. While viewing an image, press <Options> and
•
•
•
•
•
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
select Slide show. The slide show begins.
3. Press <Back> to stop the slide show.
Hidden from Bluetooth: hide the file so that
other Bluetooth devices cannot access it.
Editing an image
1. Select a photo.
Visible to Bluetooth: share the file with other
Bluetooth devices.
2. Press <Options> and select Edit
.
Activate key: get a new licence key when the
key for the selected DRM file expires.
3. Press <Options> and change the photo using
the following options:
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
•
•
Resize: change the image size.
Effects: change the colour tone or apply a
special effect to the photo.
•
Set as: set the image as your wallpaper for the
idle screen or a caller ID image for a Contacts
entry.
•
•
Adjust: adjust the image brightness,
contrast, or colour balance.
Frames: apply a decorative frame.
54
•
•
•
Move: move the file to another folder.
Playing a video clip
1. Scroll to a video folder.
Copy: copy the file to another folder.
Real size: show the image in real size or display
size.
2. Select a video clip. The media player opens and
the selected video plays.ꢀp. 35
•
•
Slide show: view all images as a slide show.
Using video options
Edit: edit the image and save it as a different
file.
From a video list, press <Options> to access the
following options:
•
•
•
•
Delete: delete the file.
•
•
Play: play the selected file.
Rename: change the file name.
Details: access the file properties.
Add to play list: add the selected file to the
play list.
Key management: manage the licence keys
you have acquired.
•
•
•
•
•
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
Hidden from Bluetooth: hide the file so that
other Bluetooth devices cannot access it.
Downloading images
1. Scroll to the Downloads folder.
Visible to Bluetooth: share the file with other
Bluetooth devices.
2. Select More pictures. You are connected to the
website preset by your service provider.
Activate key: get a new licence key when the
key for the selected DRM file expires.
3. Search for the file you want and follow the
onscreen instructions to download it.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
Videos
Use menu to access video clips you have recorded,
downloaded, received in messages, or imported
from your computer.
•
•
•
•
Move: move the file to another folder.
Copy: copy the file to another folder.
Delete: delete the file or all files.
Rename: change the file name.
Video clips recorded on other devices, such as
camcorders, may not play correctly.
55
Menu functions
•
Lock
/
Unlock: lock the file to prevent it from
•
•
•
•
•
•
Add to play list: add the selected file to the
play list.
being deleted, or unlock the file.
•
•
•
New folder: add a new folder.
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
Details: access the file properties.
Memory status: access memory information for
each folder in File manager
Hidden from Bluetooth: hide the file so that
other Bluetooth devices cannot access it.
.
Visible to Bluetooth: share the file with other
Bluetooth devices.
•
Key management: manage the licence keys
you have acquired.
Activate key: get a new licence key when the
key for the selected DRM file expires.
Downloading video clips
1. Scroll to the Downloads folder.
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
2. Select More videos. You are connected to the
website preset by your service provider.
3. Search for the file you want and follow the
onscreen instructions to download it.
•
•
Set as ringtone: set the file as your ringtone
for voice or video calls.
Set as caller ID: set the file as a ringtone for a
Contacts entry.
Music
Use this menu to access AAC or MP3 music files you
have downloaded, received in messages, or
imported from your computer.
•
•
•
•
•
Move: move the file to another folder.
Copy: copy the file to another folder.
Delete: delete the file or all files.
Rename: change the file name.
Playing a music file
Select a music file. The media player opens and the
Lock/Unlock: lock the file to prevent it from
selected file plays.ꢀp. 35
being deleted, or unlock the file.
•
•
•
New folder: add a new folder.
Using music file options
Details: access the file properties.
Memory status: access memory information for
From the music file list, press <Options> to access
the following options:
each folder in File manager
.
•
Play: play the selected file.
56
•
Key management: manage the licence keys
you have acquired.
Using sound options
During playback, press <Options> to access the
following options:
Downloading music files
1. Select More music. You are connected to the
•
•
•
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
website preset by your service provider.
Hidden from Bluetooth: hide the file so that
other Bluetooth devices cannot access it.
2. Search for the file you want and follow the
onscreen instructions to download it.
Visible to Bluetooth: share the file with other
Bluetooth devices.
Sounds
•
•
•
Delete: delete the file or all files.
Use this menu to access the default ringtones and
sound files you have downloaded or received in
messages. You can also access voice memos you
have recorded.
Rename: change the file name.
Set as ringtone: set the file as your ringtone
for voice or video calls.
•
•
Set as caller ID: set the file as a ringtone for a
Contacts entry.
Playing a sound clip
1. Scroll to a sound folder.
2. Select a sound clip.
Details: access the file properties.
Downloading ringtones
For a voice memo, see Voice recorder
.ꢀp. 36
1. Select More ringtones. You are connected to
During playback, use the following keys:
the website preset by your service provider.
Key
Left
Function
2. Search for the file you want and follow the
onscreen instructions to download it.
Returns back to the previous file.
Skips to the next file.
Right
Games & More
Up/Down/
/
Adjusts the volume.
Use this menu to access the embedded Java games
and download Java applications.
Centre
Allows you to send the sound clip to
other people.
57
Menu functions
•
Memory status: access the memory
information for each folder in File manager
Accessing a game
.
Select a game from the game list and follow the
onscreen instructions. The procedure may differ
from game to game.
Downloading new games
1. Select More games. You are connected to the
website preset by your service provider.
Using Java application options
2. Search for the application you want and follow
the onscreen instructions to download it.
From the application list, press <Options> to
access the following options:
•
•
Play: launch the selected application.
Other files
Activate key: get a new licence key when the
key for the selected DRM file expires.
Files that you have received but which are not
supported by your phone are stored in this folder.
You cannot open these files on the phone.
Unsupported file formats include *.doc, *.ppt, *.txt,
and so on.
•
Reactivate key: get another licence key even
when the key for the selected DRM file has not
expired.
•
•
Move: move the application to another folder.
From the file list, press <Options> to access the
following options:
Delete: delete the selected application or
application folder.
•
•
Send: send the file via e-mail or Bluetooth.
•
•
Rename: change the name of the selected
application or application folder.
Hidden from Bluetooth: hide the file so that
other Bluetooth devices cannot access it.
Lock/Unlock: lock the application to prevent it
from being deleted, moved, renamed, or unlock
the application.
•
Visible to Bluetooth: share the file with other
Bluetooth devices.
•
•
•
Delete: delete the selected file or all files.
•
•
Details: access the application properties.
Rename: change the file name.
Key management: manage the licence keys
you have acquired.
Lock/Unlock: lock the file to keep it from being
deleted, or unlock the file.
•
•
New folder: add a new application folder.
•
•
New folder: add a new folder.
Details: access the file properties.
Network settings: activate a connection profile
to be used for accessing a Java server. You can
also create or edit a profile.ꢀp. 74
58
•
Memory status: access the memory
information for each folder in File manager
•
•
For a non-wake-up alarm, press any key.
.
For a wake-up alarm, press <OK> or [Centre].
Press any key, except for <OK> and [Centre], to
cause it to sound again after 5 minutes. You can
do this a maximum of 5 times.
Organiser (Menu 7)
The Organiser menu enables you to keep track of
your schedule. You can also set alarms.
Deactivating an alarm
1. Select the alarm you want to deactivate.
2. Select Off on the Alarm line and press [Centre].
To access this menu, press [Centre] in Idle mode
and select Organiser
.
Setting the alarm to sound when the phone
is off
Alarms (Menu 7.1)
Use this menu to set alarms to ring at specified
times to remind you of important events or wake
you up in the morning. You can also check alarms for
missed events.
From the Alarms screen, select Auto power
→
On.
If the phone is off when it is time for the alarm to
sound, the phone switches on and sounds the alarm.
Setting an alarm
Calendar (Menu 7.2)
1. Select the type of alarm.
2. Set each alarm option:
Use this menu to manage your monthly schedule.
Consulting the calendar
•
•
•
•
Alarm: activate the alarm.
When you enter the Calendar menu, the calendar in
appears with today’s date indicated by a blue box.
Time: enter the time for the alarm to ring.
Repeat: select a repeat option.
Alert tone: select an alarm tone.
Selecting a day
3. Press <Options> and select Save
.
•
•
•
Press [Left] or [Right] to move by day.
Press [Up] or [Down] to move by week.
Press [ / ] to move by month.
Stopping an alarm
When the time for an alarm comes and the alarm
sounds:
59
Menu functions
•
•
•
•
before: set how long before the event the
alarm is to alert you.
Repeat: select to set the item to recur and
select a repeat option.
until: set the ending date, if the item will
recur.
Expiry: set when the item will be deleted
from the calendar.
Using calendar options
From the calendar, press <Options> to access the
following options:
•
•
View: display the items stored for that date.
New: add a new schedule item, anniversary,
task, or memo.
•
•
•
•
Week view: display the week view screen.
Go to today: go to today’s date.
4. Press <Options> and select Save to save the
Go to date: enter a specific date.
item.
Start date: set whether the calendar starts with
Sunday or Monday.
Entering an anniversary
1. Select a date on the calendar.
•
•
Delete: delete the items for the specific period.
2. Press <Options> and select New
Anniversary
3. Enter information or change the settings:
→
Delete all: delete all items in the calendar.
.
Entering a schedule item
1. Select a date on the calendar.
2. Press <Options> and select New
•
Occasion: enter information about the
anniversary.
Date: enter the date.
Alarm: select to set an alarm for the
anniversary.
before: set how long before the event the
alarm is to alert you.
alarm time: enter the time for the alarm to
sound.
Repeat every year: set the phone to
remind you of the anniversary every year.
→
Schedule.
•
•
3. Enter information or change the settings:
•
•
•
Title: enter the title of the item.
Details: enter the item details.
Start and End: enter the starting and ending
times for the item.
•
•
•
•
•
•
Start date and End date: enter the starting
and ending dates for the item.
Location: enter item information about the
location.
4. Press <Options> and select Save
.
Alarm: select to set an alarm for the item.
60
•
View: access the items stored for the selected
date.
Entering a task
1. Select a date on the calendar.
•
•
New: add a new item.
2. Press <Options> and select New
→
Task.
Completed/To do: change the status of the
selected task.
3. Enter information or change the settings:
•
•
•
•
•
Title: enter the title for the task.
Task: enter the task content.
Start date: enter the starting date.
Due date: enter the ending date.
Priority: select a priority level.
•
•
•
Month view: display the month view screen.
Week view: display the week view screen.
Change date/Change due date/Reschedule:
change the date of the item.
•
•
Delete: delete the selected item.
4. Press <Options> and select Save
.
Delete all: delete all of the items for the
selected day.
Entering a memo
1. Select a date on the calendar.
2. Press <Options> and select New
•
•
Send schedule/Send task: send the item via
SMS, e-mail, File messenger, or Bluetooth.
→
Memo.
3. Enter the memo text and press [Down].
4. Enter the date for the memo.
Send memo: send the memo via SMS.
Week view (Menu 7.3)
5. Press <Options> and select Save
.
You can view items for the selected week. A call on
the timetable indicates the presence of a schedule
item. Select a cell for the date you want.
Viewing an item
Once you have created items, the square brackets
appear on the corner of the date call.
Today’s events (Menu 7.4)
1. Select a date on the calendar to display the
items for that day.
Use this menu to view items for the selected date.
The following icons indicate the type of event:
2. Select an item to view its details.
•
•
Schedule item
Task
•
•
Anniversary
Memo
Using event options
From the item list, press <Options> to access the
following options:
61
Menu functions
If you have set the Repeat and Alarm options, the
Missed event alarm (Menu 7.9)
and
icons display.
When you are unable to acknowledge an alarm for a
schedule item or an anniversary, the phone stores
the alarm until you confirm it.
Select an item to view its details.
Schedule (Menu 7.5)
1. Select an item.
This menu displays schedule items you have
created. If you have set the Repeat and Alarm
2. Press <Confirm> to confirm and delete the
item.
options, the
and
icons display.
Memory status (Menu 7.0)
Select a schedule item to view its details.
Use this menu to access memory information for the
items stored on the calendar.
Anniversary (Menu 7.6)
This menu displays anniversaries you have created.
If you have set the Repeat and Alarm options, the
Camera (Menu 8)
and
icons display.
Select an anniversary item to view its details.
You can use the camera module embedded in your
phone to take photos and record videos.
Task (Menu 7.7)
To access this menu, press [Centre] in Idle mode
and select Camera. You can also press and hold
This menu displays task items you have created. The
icons on the right indicate the importance; the lower
the number on the icon, the higher the priority. A
check mark appears in the status check box if the
task has been completed.
[
] in Idle mode.
• Do not take photos of people without their
permission.
• Do not take photos in a place where cameras
are not allowed.
• Do not take photos in a place where you
may interfere with another person’s privacy.
Select a task item to view its details.
Memo (Menu 7.8)
This menu displays memos you have created.
Select a memo item to view its details.
62
Using camera options in Capture mode
Taking a photo
In Capture mode, press <
following options:
> to access the
You can take photos in various modes. The camera
produces JPEG photos.
•
•
•
Take photo: take a photo.
When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
Record video: switch to Record mode.
Switch camera: switch between the front lens
and the rear lens.
1. Access the Camera menu or press and hold [
]
•
•
Go to Photos: display the photos stored in the
Pictures folder.
in Idle mode.
2. Press [ ] to switch between the front lens and
the rear lens.
Shooting mode: take a photo in the following
modes:
3. Make any desired adjustments.
Single shot: take a photo in the normal mode.
You can select whether or not the camera
automatically saves a photo.
•
Press <
next section
Use the keypad to change the camera
settings or switch to other modes. p. 64
> to access camera options.
ꢀ
•
Multi shot: take several action stills. You can
select the number of still images the camera will
take.
ꢀ
4. Press [Centre] to take a photo. The photo is
saved in the Pictures folder.
Mosaic shot: take several stills and save them
in one frame. You can select the layout.
5. To
use photo options
delete the photo
Press
•
•
•
Effects: change the colour tone of the image.
<Options>.ꢀp. 64
Frames: apply a decorative frame.
<
Delete> and then
Timer: set a time delay before the camera takes
a photo.
<Yes>.
return to Capture mode [Centre]
•
Zoom/Hide zoom: display or hide the zoom
control bar.
63
Menu functions
•
•
Brightness/Hide brightness: display or hide
the brightness control bar.
Using the keypad in Capture mode
You can use the keypad to customise your camera
settings in Capture mode.
Camera settings: change the default settings
for taking a photo.
Key
Function
Default name: change the default prefix of the
file name.
Left/Right
Up/Down
Adjusts the brightness.
Zooms in or out.
Viewfinder: select a preview mode, either Full
Screen mode or Normal mode with actual ratio.
Flips the image vertically.
Shows the mirror image.
Switches to Record mode.
Changes the image size.
Shutter sound: select a camera shutter sound.
Capture quality: select an image quality.
Image size: select an image size.
1
2
3
4
5
ꢀp. 65
Multi shot speed: select the shooting speed
between each shot in Multi Shot mode.
Changes the image quality.
Changes the shooting mode.
Spot metering: adjust the exposure based on a
specific area of the image. Select On to display
the spot focus frame in the middle of the image,
and change the exposure according to the
Changes the colour tone or applies a
special effect.
brightness of the image fragment in the frame.
7
8
0
Selects a decorative frame.
Sets the timer.
White balance: adjust the colour balance of the
photo. You can make your photo appear warmer
or cooler.
Goes to the Pictures folder.
Changes the preview mode.
•
Camera shortcuts: view the functions of the
keys you can use in Capture mode.
Using photo options
After saving a photo, press <Options> to access
the following options:
64
•
•
•
Viewfinder: return to Capture mode.
5. Press [Centre] to start recording.
View: access one of the multi-shot photos.
To pause, press <Pause>.
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
6. Press [Centre] to stop recording. The video
automatically saves in the Videos folder.
•
•
Delete: delete the file.
7. To
use video options
delete the video clip
Press
Set as: set the photo as your wallpaper for the
idle screen or as a caller ID image for a Contacts
entry.
<Options>.ꢀp. 66
<
Delete> and then
•
•
Go to Photos: access the Pictures folder.
<Yes>.
ꢀp. 54
return to Record mode [Centre].
Rename: change the file name.
Using camera options in Record mode
Recording a video
In Record mode, press <
following options:
> to access the
You can use your phone just like a camcorder to
record what is currently displayed on the camera
screen and save it as a video file. The camera will
produce 3GP video clips.
•
•
•
Record: record a video.
Take photo: switch to Capture mode.
1. access the Camera menu or press and hold [
]
Switch camera: switch between the front lens
in Idle mode.
and the rear lens.
2. Press [1] to switch to Record mode.
•
Go to Videos: display the video clips stored in
the Videos folder.
3. Press [ ] to switch between the front lens and
the rear lens.
•
•
Effects: change the colour tone of the image.
4. Make any desired adjustments.
Zoom/Hide zoom: display or hide the zoom
control bar.
•
Press <
next section
Use the keypad to change the camera
settings or switch to other modes. p. 66
> to access camera options.
ꢀ
•
Brightness/Hide brightness: display or hide
the brightness control bar.
•
ꢀ
65
Menu functions
•
Video settings: change the following settings
for recording a video:
Key
1
Function
Switches to Capture mode.
Changes the frame size.
Changes the image quality.
ꢀp. 63
Default name: change the default prefix of the
video name.
2
Quality: select an image quality.
3
Recording time: select a video recording mode.
4
Changes the video recording mode.
Select Limit for MMS to record a video suitable
for an MMS message.
5
Changes the colour tone or applies a
special effect.
Select Normal to record a video within the limit
of the currently available memory. The length of
your video is determined by how much memory
has been used.
7
0
Mutes or unmutes audio.
Goes to the Videos folder.
Size: select an image size.
Using video options
Audio record: record audio with a video clip.
After saving a video clip, press <Options> to access
the following options:
•
Camcorder shortcuts: view the functions of
the keys you can use in Record mode.
•
•
•
Play: play back the video clip.
Viewfinder: return to Record mode.
Using the keypad in Record mode
Send: send the file via MMS, e-mail, File
messenger, or Bluetooth.
You can use the keypad to customise your camera
settings in Record mode.
•
•
•
Delete: delete the file.
Key
Function
Go to Videos: access the Videos folder.
ꢀp. 55
Left/Right
Up/Down
Adjusts the brightness.
Zooms in or out.
Rename: change the file name.
Flips the image vertically.
Shows the mirror image.
66
•
•
Message alert repetition: select if the
phone repeatedly reminds you of a new
message.
Phone sounds: turn the various sounds on
the phone on or off.
Settings (Menu 9)
Use this menu to customise your phone settings.
You can also reset the settings to their default
values.
To access this menu, press [Centre] in Idle mode
All on: enable all tones.
and select Settings
.
Popup box alerts: set the phone to beep
when a pop-up window displays.
Profiles (Menu 9.1)
Minute minder: set the phone to beep
every minute during an outgoing call to keep
you informed of the length of your call.
Use this menu to adjust and customise the phone
tone for different events or situations.
Call connect tone: set the phone to beep
when an outgoing call is connected to the
system.
Editing a profile
1. Scroll to the profile you want.
2. Press <Options> and select Edit
.
Call end tone: set the phone to beep when a
call is disconnected by the other person or
due to a faded signal.
3. Change the sound settings:
•
•
•
•
•
•
Call alert type: select an alert type for the
call ringer.
Voice call ringtone: select a ringtone for
voice calls.
Video call ringtone: select a ringtone for
video calls.
Tone volume: adjust the volume for the call
ringer.
Message alert type: select an alert type for
the message ringer.
Message alert tone: select a ringtone for
the message ringer.
Power on/off: set the phone to beep when
you turn it on or off.
Alerts on call: set the phone to beep when
you receive a new message or when the time
for an alarm comes during a call.
•
•
•
Key tones: select a tone which sounds when
you press a key.
Key tone volume: adjust the volume of the
key tones.
Call answer mode (for Car): select how to
answer an incoming call.
67
Menu functions
4. When you have finished, press <Options> and
Shortcuts (Menu 9.3.2)
select Save
.
You can use the Navigation keys as shortcuts to
access specific menus directly from Idle mode. Use
this menu to assign a shortcut to a key.
Changing the active profile
From the profile list, select the profile you want.
Assigning a shortcut menu
2. Select a menu to be assigned to the key.
Using shortcut options
Time & date (Menu 9.2)
Use this menu to change the time and date
displayed on your phone. Before setting the time
and date, specify your time zone in the World clock
From the Shortcuts screen, press <Options> to
access the following options:
menu.ꢀp. 38
•
•
•
Time: enter the current time.
•
•
•
Assign: assign a shortcut menu.
Date: enter the current date.
Change: change a shortcut menu assignment.
Time format: select a 12-hour or 24-hour time
format.
Remove: deactivate the shortcut assignment to
the selected key.
•
•
Date format: select a date format.
•
Remove all: deactivate all shortcut
assignments.
Summer time: select to apply daylight savings
time.
Auto keypad lock (Menu 9.3.3)
•
Auto update: select to receive time information
Use this menu to set the phone to lock the keypad
automatically when the display turns off.
from your network.
Phone (Menu 9.3)
Anykey answer (Menu 9.3.4)
Many different features of your phone’s system can
be customised to suit your preferences.
Use this menu to answer an incoming call by
pressing any key, except for <Reject> and [ ].
Language (Menu 9.3.1)
Use this menu to select one of several languages for
the display text or T9 input mode.
68
Volume key (Menu 9.3.5)
Wallpaper (Menu 9.4.2)
Use this menu to set whether the phone mutes the
call ringer or rejects a call if you press and hold
[ / ] when a call comes in.
Use this menu to change the background image to
be displayed for the idle screen.
LCD brightness (Menu 9.4.3)
Key management (Menu 9.3.6)
Use this menu to adjust the brightness of the display
for varying lighting conditions.
Use this menu to manage the licence keys you have
acquired to activate media contents locked by DRM
systems.
Backlight (Menu 9.4.4)
Use this menu to change the settings for the
backlight for the display.
Press <Options> to access the following options:
•
View/Play/Preview: open the corresponding
item.
•
On: select the length of time the backlight stays
on.
•
•
Delete: delete the selected licence key.
•
Dim: select the length of time the display stays
on in Dim mode after the backlight turns off.
After a specified time, the display turns off.
Go to File Manager: access the File manager
menu.
•
Details: access the properties of the licence key.
Dialling display (Menu 9.4.5)
Display (Menu 9.4)
Use this menu to select a font colour and size for the
numbers entered and the background colour of the
display while dialling.
Use this menu to change settings for the display and
the backlight.
Greeting message (Menu 9.4.1)
Call (Menu 9.5)
Use this menu to enter the greeting that is displayed
briefly when the phone is switched on.
Use this menu to access network services. Please
contact your service provider to check their
availability and subscribe to them, if you wish.
69
Menu functions
5. Press <Options> and select Activate. To
Caller ID (Menu 9.5.1)
deactivate the call diverting, select Deactivate
.
This network service allows you to prevent your
phone number from being displayed on the phone of
the person being called. If you select By network
the phone will use the default setting provided by
the network.
Barring (Menu 9.5.3)
,
This network service allows you to restrict your calls.
1. Select the type of calls to be barred.
2. Select a call barring option:
Some networks do not allow the user to
change this setting.
•
•
•
All outgoing calls: prohibit all outgoing
calls.
Outgoing int’l calls: prohibit international
calls.
Diverting (Menu 9.5.2)
This network service reroutes incoming calls to a
different phone number that you specify.
Int’l calls exc. home: only allow calls to
numbers within the current country when you
are abroad, and to your home country.
All incoming calls: prohibit incoming calls.
Incoming calls when roaming: prohibit
incoming calls when you use your phone
outside of your home service area.
Cancel all: cancel all call barring settings,
allowing calls to be sent and received
normally.
1. Select the type of calls to be diverted.
2. Select a call diverting option:
•
•
•
•
Always: divert calls.
Busy: divert calls when you are on another
call.
•
•
No reply: divert calls when you do not
answer the phone.
Unreachable: divert calls when you are not
in an area covered by your service provider
or when your phone is switched off.
Cancel all: cancel all call diverting options.
•
3. Enter the call barring password supplied by your
service provider.
•
4. Press <Options> and select Activate. To
3. Enter the number to which the calls will be
deactivate the call barring, select Deactivate
.
diverted in the Divert to line.
You can change the call barring password
obtained from your service provider. From the
call type list, press <Options> and select
4. If you selected No reply, move to the Waiting
time line and select the length of time the
network delays before diverting a call.
Change password
.
70
Waiting (Menu 9.5.4)
Video call (Menu 9.5.7)
This network service informs you when someone is
trying to reach you while you are on another call.
Use this menu to change the default settings for
using the video call feature.
1. Select the type of calls to which the call waiting
option will apply.
•
Show me: change the video camera settings for
receipt of video calls.
2. Press <Options> and select Activate. To
Optionally: you can select whether or not the
video camera is used each time you answer a
video call.
deactivate the call waiting, select Deactivate
.
Auto redial (Menu 9.5.5)
Always: the camera is always used.
Use this menu to set the phone to make up to ten
attempts to redial a phone number after an
unsuccessful call.
•
Retry by: set how to retry when the phone fails
to make a video call by MMS or voice call.
Connectivity (Menu 9.6)
Closed user group (Menu 9.5.6)
Use this menu to set options for connection available
on your phone.
Use this menu to set the phone to set incoming and
outgoing calls to be restricted to a selected user
group. For details about how to create a closed user
group, contact your service provider.
Bluetooth (Menu 9.6.1)
Using Bluetooth wireless, you can connect the phone
wirelessly to other Bluetooth devices and exchange
data with them, talk hands-free, or control the
phone remotely.
•
•
Use user group: activate CUG index numbers.
Outside access: enable calls to numbers other
than those in the Closed user group. This feature
depends on the nature of your CUG subscription.
Bluetooth technology allows free wireless
connections between all Bluetooth-compliant
devices within a range of 10 metres. Since the
devices communicate using radio waves, they do not
need to be in line of sight to each other.
•
•
Default group: enable the default CUG, if you
have set one with your service provider. When
making a call, you are given the option of using
your default CUG, instead of selecting one from
the list.
Group index: add, delete, or activate CUG
index numbers.
71
Menu functions
Searching for and pairing with a Bluetooth
device
• If there are obstacles between the devices,
the maximum operating distance may be
reduced.
1. From the Bluetooth setting options, select My
• It is recommended that you do not use the
Bluetooth feature while using multimedia
features, such as voice recorder, camera, and
media player, or vice versa, for better
performance.
• Some devices may not be compatible with
your phone.
devices
.
2. Select Search new device
.
After searching, a list of devices to which you can
connect displays. The following icons indicate the
kind of device:
•
•
•
Mobile phone
Computer
•
•
•
PDA
Printer
Setting up the Bluetooth feature
The Bluetooth menu provides the following
options:
Hands-free car kit
or headset
Unknown
device
•
•
•
•
Activation: activate or deactivate the Bluetooth
feature.
The colour of the icon indicates the status of the
device:
My devices: search for connectable Bluetooth
devices.
•
•
•
Grey for unpaired devices
Blue for paired devices
Red for devices that are currently connected
to your phone
My phone’s visibility: allow other Bluetooth
devices to locate your phone, or not.
My phone’s name: assign a Bluetooth device
name to your phone, which is then displayed on
other devices.
3. Select a device.
4. Enter a Bluetooth PIN code and press <OK>.
This code is used just once and you don’t need to
memorise it.
•
•
Secure mode: determine if the phone asks for
your confirmation when other devices access
your data.
When the owner of the other device enters the
same code, pairing is complete.
Bluetooth service: display available Bluetooth
services.
72
4. Select Send
(
name card
.
/
schedule
/
task
)
→
Some devices, especially headsets or hands-
free car kits, may have a fixed Bluetooth PIN,
such as 0000. If the other device has a code,
you must enter it.
Via bluetooth
The phone searches for devices within range and
displays a list of available devices.
5. Select a device.
Using device options
6. If necessary, enter the Bluetooth PIN needed for
From the device list, press <Options> to access the
following options:
pairing and press <OK>.
Receiving data via Bluetooth
•
Browse device: search for data from the
selected device and import data directly to your
phone.
To receive data via Bluetooth, your phone’s
Bluetooth feature must be active and its visibility
must be enabled.
•
•
•
Connect: connect to a headset or hands free car
kit.
If an unauthorised Bluetooth device sends data to
your phone, press <Yes> to allow the device to
access your phone.
Disconnect: end the connection with the
connected device.
Authorise device/Unauthorise device:
Network (Menu 9.6.2)
determine whether or not the phone asks you to
permit connection when other devices try to
connect to your phone.
Use this menu to change the settings for connecting
to your cellular network.
•
Network selection: select to either
•
•
Delete: delete the device or all devices from the
list.
automatically or manually select the network
used when roaming outside of your home area.
You can select a network other than your home
network only if there is a valid roaming
agreement between the two.
Rename: rename the paired device.
Sending data via Bluetooth
1. Activate the Bluetooth feature.
•
Network mode: select the network you use.
2. Select the application in which the item you want
to send is stored.
Automatic: the phone scans for available
networks.
3. Scroll to the item you want and press
<Options>.
73
Menu functions
GSM 900/1800: the phone operates in the
combined GSM 900/1800 network.
•
Auth type: choose the type of
authentication used.
•
•
•
User ID: enter the server login ID.
Password: enter the server password.
Protocol: select the protocol from among
GSM 1900: the phone operates in the GSM
1900 network. This option is only available in the
U.S.A.
WAP
,
HTTP, and Other
.
UMTS: the phone operates in UMTS (3G
network) networks. You can get a higher speed
connection than on lower generation networks,
and use advanced data and information services,
such as video calls.
•
•
•
•
•
Home URL: enter the URL address of the
page to be used as your homepage.
Gateway address: (WAP only) enter the
gateway address of the proxy server.
Secure connection: (WAP only) turn the
secure mode on or off.
Connections (Menu 9.6.3)
Use this menu to create and customise the profiles
containing the settings for connecting your phone to
the network. You need these settings to use the web
browser or send MMS messages or e-mails.
Proxy address/Port: (HTTP only) set the
proxy server address and port.
Linger time (sec.): set a time period after
which the network is disconnected if there
has been no new data traffic in that time.
Advanced settings: provide you with the
following options:
Your phone is set up by default for connecting
to the network. If you change the settings
without first checking with your service
provider, the web browser, MMS, and e-mail
features may not work properly.
•
Static IP: specify if you want to manually
enter an IP address; see the Local phone IP
option. If you want the IP address to be
automatically assigned by the server, remove
the check mark.
Creating a profile
1. Press <New>. If a profile has already been
saved, press <Options> and select New
.
Local phone IP: enter the IP address
obtained from the network operator, if you
checked the Static IP option.
2. Specify profile parameters:
•
•
Set name: enter a profile name.
Access name: enter the access point name
used for the address of the GPRS network
gateway.
74
Static DNS: specify if you want to manually
enter the Domain Name Server (DNS)
address; see the Server 1/Server 2 option.
Internet (Menu 9.7.1)
Use this menu to select a connection profile to be
used for accessing the Internet. You can also create
If you want the address to be automatically
assigned by the server, remove the check
mark.
or edit a profile.
ꢀp. 74
Messages (Menu 9.7.2)
Use this menu to change the default settings for
Server 1/Server 2: enter the Domain Name
Server (DNS) addresses.
using the message feature.
ꢀp. 49
Traffic class: select the traffic class, if you
selected the PS network.
Contacts (Menu 9.7.3)
Use this menu to change the settings for using
Contacts. p. 34
3. Press <Save> to save the profile.
ꢀ
Using profile options
Camera (Menu 9.7.4)
From the profile list, press <Options> to access the
following options:
Use this menu to change the default settings for
taking photos.
ꢀp. 64
•
•
•
•
•
Edit: edit the selected profile.
New: add a new profile.
Video recorder (Menu 9.7.5)
Rename: change the profile name.
Delete: delete the profile.
Use this menu to change the default settings for
recording video clips.ꢀp. 66
Restore: restore the changed settings to the
default status.
Voice recorder (Menu 9.7.6)
Use this menu to change the default settings for the
voice recorder.
ꢀp. 37
Application settings (Menu 9.7)
Media player (Menu 9.7.7)
You can customise the settings for using applications
available on the phone.
Use this menu to change the default settings for
playing media files in the Media player.
ꢀp. 36
75
Menu functions
VOD (Menu 9.7.8)
PIN lock (Menu 9.8.3)
Use this menu to activate a connection profile to be
used for accessing streaming servers to use VOD
services. You can also create or edit a profile.
The 4- to 8-digit PIN (Personal Identification
Number) protects your USIM/SIM card against
unauthorised use. When this feature is enabled, the
phone requires your PIN each time it is switched on.
ꢀp. 74
Fixed dialling mode (Menu 9.8.4)
Security (Menu 9.8)
If supported by your USIM/SIM card, Fixed Dialling
Number (FDN) mode restricts your outgoing calls to
a limited set of phone numbers. When this feature is
enabled, you can make calls only to phone numbers
stored on the USIM/SIM card. To use this feature,
you must enter your PIN2.
Use this menu to protect the phone against
unauthorised use by managing the several access
codes of your phone and USIM/SIM card.
If you enter an incorrect PIN/PIN2 three times
in succession, the USIM/SIM card is blocked.
To unblock it, you need to enter your PUK/
PUK2 (Personal Unblocking Key). The codes
are supplied by your network operator.
Change phone password (Menu 9.8.5)
Use this menu to change your phone password.
Phone lock (Menu 9.8.1)
Privacy lock (Menu 9.8.6)
Use this menu to protect the phone from
unauthorised use. When this feature is enabled, you
must enter a 4- to 8-digit phone password each time
the phone is switched on.
Use this menu to lock your messages, media files,
Contacts entries, and call logs. When a lock option is
enabled, you must enter the phone password to
access the locked items.
The password is preset to 00000000. To change the
password, use the Change phone password
menu.
Change PIN code (Menu 9.8.7)
Use this menu to change your PIN. The PIN lock
feature must be enabled to use this feature.
SIM lock (Menu 9.8.2)
Change PIN2 code (Menu 9.8.8)
The SIM lock feature allows your phone to work only
with the current USIM/SIM by assigning a USIM/SIM
lock code. You must enter the USIM/SIM lock code
to use a different USIM/SIM card.
If supported by your USIM/SIM card, the Change
PIN2 code feature changes your current PIN2.
76
Memory status (Menu 9.9)
Solve problems
Help and personal needs
Use this menu to check the amount of memory
being used for storing data, such as SMS, MMS,
Email, Push message, File manager, Contacts, and
Organiser items. You can also view the amount of
shared memory.
To save the time and expense of an unnecessary service
call, perform the simple checks in this section before
contacting a service professional.
When you switch on your phone, the
following messages may appear:
Operator settings (Menu 9.0)
Use this menu to set a service provider according to
the SIM card you’re using.
“Please insert SIM/USIM card”
•
Be sure that the SIM card is correctly installed.
“Phone lock”
The automatic locking function has been
When you select a service provider, the phone will
automatically turn itself off and then back on. You
can then see the profiles corresponding to the
service provider in the connection menus.
•
enabled. You must enter the phone’s password
before you can use the phone.
This menu may not be shown depending on your
service provider.
“PIN lock”
•
You are using your phone for the first time. You
must enter the PIN supplied with the SIM card.
Reset settings (Menu 9.*)
•
The PIN lock feature is enabled. Every time the
phone is switched on, the PIN has to be entered.
To disable this feature, use the PIN lock menu.
Use this menu to reset the phone’s settings you
have changed and clear all data you have added.
1. Enter the phone password and press
“Enter PUK”
The PIN code was entered incorrectly three times
<
Confirm>.
The password is preset to 00000000. You
can change this password. p. 76
2. Press <Yes> to confirm the reset.
•
in succession, and the phone is now blocked.
Enter the PUK supplied by your service provider.
ꢀ
77
Solve problems
“No service,” “Network failure,” or “Not
done” displays
Your correspondent cannot hear you
speaking
•
The network connection has been lost. You may
be in a weak signal area. Move and try again.
•
Be sure that you have switched on the
microphone.
•
You are trying to access an option for which you
have no subscription with your service provider.
Contact the service provider for further details.
•
Be sure that you are holding the phone close
enough to your mouth. The microphone is
located at the bottom of the phone.
You have entered a number but it was not
dialled
The phone starts beeping and “Low battery”
flashes on the display
•
•
Be sure that you have pressed [ ].
•
Your battery is insufficiently charged. Recharge
the battery.
Be sure that you have accessed the right cellular
network.
The audio quality of the call is poor
•
•
Be sure that you have not set an outgoing call
barring option.
Check the signal strength indicator on the
display ( ). The number of bars indicates the
signal strength from strong ( ) to weak ( ).
Your correspondent cannot reach you
•
Try moving the phone slightly or moving closer
to a window if you are in a building.
•
•
•
Be sure that your phone is switched on. ([
pressed for more than one second.)
]
Be sure that you are accessing the correct
cellular network.
No number is dialled when you re-call a
Contacts entry
•
Be sure that you have not set an incoming call
barring option.
Use the Search contact menu to ensure the
number has been stored correctly.
•
Re-store the number, if necessary.
78
The battery doesn’t charge properly or the
phone sometimes turns itself off
Health and safety information
•
Wipe the charging contacts both on the phone
and on the battery with a clean soft cloth.
SAR certification information
This phone meets European Union (EU)
requirements concerning exposure to radio waves.
If the above guidelines do not help you to
solve the problem, take note of:
Your mobile phone is a radio transmitter and
receiver. It is designed and manufactured to not
exceed the limits for exposure to radio-frequency
(RF) energy, as recommended by the EU Council.
These limits are part of comprehensive guidelines
and establish permitted levels of RF energy for the
general population. The guidelines were developed
by independent scientific organisations through the
periodic and thorough evaluation of scientific
studies. The limits include a substantial safety
margin designed to ensure the safety of all persons,
regardless of age and health.
•
•
•
The model and serial numbers of your phone
Your warranty details
A clear description of the problem
Then contact your local dealer or Samsung after-
sales service.
The exposure standard for mobile phones employs a
unit of measurement known as Specific Absorption
Rate (SAR). The SAR limit recommended by the EU
*
Council is 2.0 W/kg.
The highest SAR value for this model phone was
0.597W/kg.
*
The SAR limit for mobile phones used by the public is 2.0 watts/
kilogram (W/kg) averaged over ten grams of body tissue. The limit
incorporates a substantial margin of safety to give additional
protection for the public and to account for any variations in
measurements. The SAR values may vary, depending on national
reporting requirements and the network band.
79
Health and safety information
SAR tests are conducted using standard operating
positions with the phone transmitting at its highest
certified power level in all tested frequency bands.
Although the SAR is determined at the highest
certified power level, the actual SAR level of the
phone while operating can be well below the
maximum value. This is because the phone is
designed to operate at multiple power levels so as to
use only the power required to reach the network. In
general, the closer you are to a base station, the
lower the power output of the phone.
•
Battery charging time depends on the remaining
battery charge, the type of battery, and the
charger used. The battery can be charged and
discharged hundreds of times, but it will
gradually wear out. When the operation time is
noticeably shorter than normal, it is time to buy
a new battery.
•
•
If left unused, a fully charged battery will
discharge itself over time.
Use only Samsung-approved batteries, and
recharge your battery only with Samsung-
approved chargers. Disconnect the charger from
the power source when it is not in use. Do not
leave the battery connected to a charger for
more than a week, since overcharging may
shorten its life.
Before a new model phone is available for sale to the
public, compliance with the European R&TTE
Directive must be shown. This directive includes as
one of its essential requirements the protection of
the health and safety of the user and any other
person.
•
•
Extreme temperatures will affect the charging
capacity of your battery: it may require cooling
or warming first.
Precautions when using batteries
•
Never use a charger or battery that is damaged
in any way.
Do not leave the battery in hot or cold places
because the capacity and lifetime of the battery
will be reduced. Try to keep the battery at room
temperature. A phone with a hot or cold battery
may not work temporarily, even when the
battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0°C
(32°F).
•
•
Use the battery only for its intended purpose.
If you use the phone near the network’s base
station, it uses less power. Talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
80
•
Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object like a
coin, clip or pen causes a direct connection
between the + and – terminals of the battery
(metal strips on the battery). For example, do
not carry a spare battery in a pocket or bag
where the battery may contact metal objects.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuiting.
Operating environment
Remember to follow any special regulations in force
in the area you are in, and always switch off your
phone whenever it is forbidden to use it, or when it
may cause interference or danger.
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
•
Dispose of used batteries in accordance with
local regulations. Always recycle. Do not dispose
of batteries in a fire.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Road safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime.
But an important responsibility accompanies the
benefits of wireless phones, one that every user
must uphold.
Electronic devices
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult the
manufacturer to discuss alternatives.
When driving a car, driving is your first
responsibility. When using your wireless phone while
driving, follow local regulations in the country or
region you are in.
81
Health and safety information
Pacemakers
Vehicles
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
If you have any reason to suspect that interference
is taking place, switch off your phone immediately.
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
Posted facilities
Switch off your phone in any facility where posted
notices require you to do so.
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Potentially explosive environments
Switch off your phone when in any area with a
potentially explosive atmosphere, and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
determine if it is adequately shielded from external
RF energy.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are reminded
of the need to observe restrictions on the use of
radio equipment in fuel depots (fuel storage and
distribution areas), chemical plants, or where
blasting operations are in progress.
Your physician may be able to assist you in obtaining
this information.
Switch off your phone in health care facilities when
regulations posted in these areas instruct you to do
so.
82
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
the areas below decks on boats, chemical transfer or
storage facilities, vehicles using liquefied petroleum
gas, such as propane or butane, areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
Certain features like Call Barring may need to be
deactivated before you can make an emergency call.
Consult this document and your local cellular service
provider.
Other important safety information
•
Only qualified personnel should service the
phone or install the phone in a vehicle. Faulty
installation or service may be dangerous and
may invalidate any warranty applicable to the
device.
Emergency calls
This phone, like any wireless phone, operates using
radio signals, wireless, and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications like medical
emergencies.
•
•
•
Check regularly that all wireless phone
equipment in your vehicle is mounted and
operating properly.
Do not store or carry flammable liquids, gases,
or explosive materials in the same compartment
as the phone, its parts, or accessories.
For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including installed or portable
wireless equipment, in the area over the air bag
or in the air bag deployment area. Improperly
installed wireless equipment could result in
serious injury if the air bag inflates.
To make or receive calls, the phone must be
switched on and in a service area with adequate
signal strength. Emergency calls may not be
possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
To make an emergency call:
1. Switch on the phone.
•
•
Switch off your phone before boarding an
aircraft. It is dangerous and illegal to use
wireless phones in an aircraft because they can
interfere with the operation of the aircraft.
2. Key in the emergency number for your present
location. Emergency numbers vary by location.
Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
3. Press [ ].
83
Health and safety information
•
Do not use harsh chemicals, cleaning solvents,
or strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
Care and maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
•
•
•
Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
•
Keep the phone and all its parts and accessories
out of the reach of small children and pets. They
inadvertently damage these things or choke on
small parts.
Do not put the phone in or on heating devices,
such as a microwave oven, stove, or radiator.
The phone may explode when overheated.
When the phone or battery gets wet, the label
indicating water damage inside the phone
changes colour. In this case, phone repairs are
no longer guaranteed by the manufacturer's
warranty, even if the warranty for your phone
has not expired.
•
•
Keep the phone dry. Precipitation, humidity, and
liquids contain minerals that corrode electronic
circuits.
Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
•
•
If your phone has a flash or light, do not use it
too close to the eyes of people or animals. This
may cause damage to their eyes.
•
•
Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
Use only the supplied or an approved
replacement antenna. Unauthorised antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
•
•
Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s
electronic circuit boards.
•
If the phone, battery, charger, or any accessory
is not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
Do not drop, knock, or shake the phone. Rough
handling can break internal circuit boards.
84
Index
Caller groups • 33
Calls
A
D
ABC mode, text input • 24
Alarm • 59
Date, set • 68
barring • 70
Answering
call log • 29
diverting • 70
holding • 26
redialling • 25
rejecting • 25
transferring • 27
waiting • 71
call • 25, 28
contacts • 31
e-mails • 47
events • 61
MMS • 45
SMS • 45
second call • 26
Anykey answer • 68
Auto redial • 71
B
Dialled calls • 29
Dialling display, set • 69
Display
Background image • 69
Backlight time, set • 69
Band selection • 73
Barring, calls • 70
Battery
Camera
photos • 63
videos • 65
backlight, set • 69
brightness • 69
icons • 10
language • 68
settings • 69
CB (Cell Broadcast) messages • 48
Characters, enter • 23
Configuration messages • 46
Connection settings • 74
Connection tone • 67
Contacts
charging • 7
low indicator • 8
precautions • 80
Bluetooth
Diverting, calls • 70
DRM (Digital Rights Management) • 53
DTMF tones, send • 27
receiving, data • 73
sending, data • 73
settings • 72
adding • 31
deleting • 34
finding • 31
options • 31
E
Broadcast messages • 53
Browser, web • 39
E-mails
creating/sending • 44
deleting • 47
settings • 51
viewing • 47
Emergency calls • 83
setting • 34
C
speed dialling • 33
Converter • 39
Creating messages
e-mail • 44
Calculator • 38
Calendar • 59
Call cost • 30
Call log
dialled • 29
missed • 29
received • 29
Call time • 30
F
file messenger • 43
MMS • 42
SMS • 41
FDN (Fixed Dialling Number) mode •
76
File manager • 53
File messenger • 43
85
Index
organiser • 62
phone • 77
Messages
Phone
care and maintenance • 84
G
Games • 57
display • 10
icons • 10
locking • 76
resetting • 77
switching on/off • 8
unpacking • 6
Greeting message • 69
cell broadcast • 48
configuration • 46
greeting • 69
MMS • 42, 43
push • 46, 53
H
Health and safety • 79
Holding, call • 26
I
Icons, description • 10
Images, downloaded • 54
Inbox, messages
e-mail • 47
SMS • 41, 45
Photos
Minute minder • 67
Missed calls • 29
MMS messages
editing • 54
taking • 63
viewing • 54
MMS • 44
SMS • 45
web • 46
creating/sending • 42, 43
PIN, change • 76
PIN2, change • 76
Power on/off tone • 67
Privacy • 76
Problems, solve • 77
Profiles • 67
deleting • 45
settings • 50
viewing • 45
International calls • 25
Internet • 39
Multimedia
files • 53
player • 35
Multiparty-call • 27
K
Push messages • 46, 53
Keypad lock • 68
Keypad tones
settings • 67
volume • 67
R
N
Received calls • 29
Received messages
configuration • 46
e-mail • 47
Name card • 33
Names
entering • 23
searching • 31
Network band, select • 73
L
Language, select • 68
Last number, redial • 25
Locking
MMS • 45
SMS • 45
Recording
media content • 76
phone • 76
SIM card • 76
O
videos • 65
voice memos • 36
Redialling
automatically • 71
manually • 25
Resetting phone • 77
Road safety • 81
Roaming • 73
Organiser • 59
Outbox, messages • 46
Loudspeaker • 27
Low battery indicator • 8
P
Password
call barring • 70
phone • 76
M
Memory status
contacts • 34
messages • 53
86
Voice recorder
playing • 37
recording • 36
Voicemail server • 53
S
Safety
information • 79
precaution • 1
Sent messages • 46
SIM card
W
Wallpaper • 69
Web browser
access • 39
inserting • 7
locking • 76
SMS messages
creating/sending • 41
deleting • 45
viewing • 45
bookmarks • 40
World time • 38
Sound profiles • 67
Sounds, downloaded • 57
Speakerphone • 27
Speed dial • 33
Switching on/off
microphone • 27
phone • 8
T
T9 mode, text input • 23
Templates, message • 48
Text, enter • 23
Time, set • 68
V
Video calls
answering • 28
making • 28
options • 28
setting • 71
Videos
playing • 55
recording • 65
87
Declaration of Conformity (R&TTE)
For the following product
:
GSM900/GSM1800/GSM1900/WCDMA with Bluetooth
Portable Cellular Telephone
(Product description)
SGH-Z150
(Model name)
Manufactured at
:
ڈ Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,
730-350
(factory name, address)
to which this declaration relates, is in conformity with the following standards and/or other normative
documents.
Safety
EMC
:
:
EN 60950-1:2001
EN 301 489-01 v1.4.1 (08-2002)
EN 301 489-07 v1.2.1 (08-2002)
EN 301 489-17 v1.2.1 (08-2002)
EN 301 489-24 v1.2.1 (11-2002)
SAR
:
:
EN 50360:2001
EN 50361:2001
Network
EN 301 511 v9.0.2 (03-2003)
EN 301 908-1 v2.2.1 (10-2003)
EN 301 908-2 v2.2.1 (10-2003)
EN 300 328 v1.4.1 (04-2003)
We hereby declare that [all essential radio test suites have been carried out and that] the above named
product is in conformity to all the essential requirements of Directive 1999/5/EC.
ญ
The conformity assessment procedure referred to in Article 10 and detailed in Annex[
]
of Directive
1999/5/EC has been followed with the involvement of the following Notified Body(ies):
BABT, Balfour House, Churchfield Road,
Walton-on-Thames, Surrey, KT12 2TD, UK
Identification mark:
0168
The technical documentation kept at
:
Samsung Electronics QA Lab.
which will be made available upon request.
(Representative in the EU)
Samsung Electronics Euro QA Lab.
Blackbushe Business Park,Saxony Way,
GU46 6GG, UK
Yateley, Hampshire,
2006.02.01
Yong-Sang Park
/
S. Manager
(place and date of issue)
(name and signature of authorized person)
ଖ
It is not the address of Samsung Service Centre. For the address or the phone number of Samsung
Service Centre, see the warranty card or contact the retailer where you purchased your phone.
*
Depending on the software installed or your service provider or country, some of the descriptions
in this guide may not match your phone exactly.
* Depending on your country, your phone and accessories may appear different from the
illustrations in this guide.
Printed in Korea
Code No.:GH68-09139A
World Wide Web
English (EU). 04/2006. Rev. 1.0
|