Samsung SGH X430 User Manual

* Some of the contents in this manual may differ from  
your phone, depending on the software installed or  
your service provider.  
DUAL BAND  
GPRS TELEPHONE  
SGH-X430  
ELECTRONICS  
Printed in Korea  
Code No.: GH68-04623A  
English. 11/2003. Rev. 1.0  
World Wide Web  
Contents  
Important Safety Precautions .......................... 7  
Unpacking ........................................................ 9  
Your Phone..................................................... 10  
Phone Layout.................................................... 10  
Display............................................................. 13  
Service Light..................................................... 16  
Getting Started............................................... 17  
Installing the SIM Card....................................... 17  
Charging the Battery.......................................... 19  
Switching the Phone On or Off............................. 21  
Call Functions................................................. 22  
Making a Call .................................................... 22  
Adjusting the Volume......................................... 24  
Answering a Call................................................ 25  
Viewing Missed Calls .......................................... 26  
Switching Quickly to the Silent Mode.................... 28  
Selecting Functions and Options..................... 29  
Phonebook ..................................................... 31  
Storing a Number with a Name............................ 31  
Using Phonebook Entry Options ........................... 33  
Searching for a Number in Phonebook.................. 35  
Editing a Caller Group ........................................ 37  
Speed-dialling................................................... 37  
Deleting All of the Phonebook Entries ................... 39  
Checking the Memory Status............................... 40  
Entering Text.................................................. 41  
Changing the Text Input Mode ............................ 42  
Using the T9 Mode............................................. 43  
Using the Upper/Lower-case Character Mode......... 44  
Using the Symbol Mode...................................... 46  
Using the Number Mode ..................................... 46  
3
2
Contents  
Contents  
Options During a Call...................................... 47  
Sound Settings............................................... 84  
Putting a Call on Hold......................................... 47  
Switching the Microphone Off (Mute).................... 48  
Muting/Sending Key Tones.................................. 49  
Sending DTMF Tones.......................................... 49  
Searching for a Number in Phonebook.................. 50  
Using the Message Service.................................. 50  
Answering a Second Call..................................... 51  
Making a Multi-party Call .................................... 51  
Ring Tone (Menu 4.1) ......................................... 84  
Ring Volume (Menu 4.2)...................................... 84  
Alert Type (Menu 4.3)......................................... 85  
Keypad Tone (Menu 4.4) ..................................... 85  
Message Tone (Menu 4.5).................................... 86  
Folder Tone (Menu 4.6)....................................... 87  
Power On/Off (Menu 4.7) .................................... 87  
Extra Tones (Menu 4.8)....................................... 87  
Using the Menus............................................. 54  
Phone Settings ............................................... 89  
Accessing a Menu Function by Scrolling ................ 54  
Accessing a Menu Function by Using its Shortcut ... 55  
List of Menu Functions........................................ 55  
My Settings (Menu 5.1)....................................... 89  
Greeting Message (Menu 5.2) .............................. 90  
Own Number (Menu 5.3)..................................... 90  
Language (Menu 5.4).......................................... 91  
Security (Menu 5.5).................................................. 91  
Display Settings (Menu 5.6) ................................ 94  
Extra Settings (Menu 5.7) ................................... 96  
Short Cut (Menu 5.8).......................................... 97  
Reset Settings (Menu 5.9) ................................... 97  
Text Messages................................................ 61  
Inbox (Menu 1.1) ............................................... 61  
Outbox (Menu 1.2) ............................................. 63  
Write New (Menu 1.3)......................................... 64  
Templates (Menu 1.4)......................................... 66  
Settings (Menu 1.5)............................................ 67  
My Objects (Menu 1.6)........................................ 68  
Memory Status (Menu 1.7)....................................... 69  
Voice Mail (Menu 1.8) ......................................... 70  
Broadcast (Menu 1.9) ......................................... 71  
Organiser ....................................................... 98  
Calendar (Menu 6.1)................................................. 98  
To Do List (Menu 6.2)............................................. 101  
Time & Date (Menu 6.3) ......................................... 104  
Alarm (Menu 6.4) ................................................... 105  
Calculator (Menu 6.5)............................................. 106  
Currency Exchange (Menu 6.6) ........................... 107  
Picture Messages............................................ 73  
Inbox (Menu 2.1) ............................................... 73  
Outbox (Menu 2.2) ............................................. 75  
Write New (Menu 2.3)......................................... 76  
Delete All (Menu 2.4).......................................... 78  
Setup (Menu 2.5)............................................... 78  
MMS Profile (Menu 2.6) ............................................ 79  
Network Services ......................................... 108  
Call Diverting (Menu 7.1) ................................... 108  
Call Barring (Menu 7.2) .......................................... 110  
Call Waiting (Menu 7.3).......................................... 112  
Network Selection (Menu 7.4)............................. 113  
Caller ID (Menu 7.5).......................................... 114  
Closed User Group (CUG) (Menu 7.6)..................... 114  
Call Records ................................................... 81  
Missed Calls (Menu 3.1)............................................ 81  
Received Calls (Menu 3.2) ................................... 81  
Dialled Calls (Menu 3.3) ...................................... 82  
Delete All (Menu 3.4).......................................... 82  
Call Time (Menu 3.5) ................................................ 82  
Call Cost (Menu 3.6)................................................. 83  
5
4
Contents  
Funbox ......................................................... 117  
Games (Menu 8.1)............................................. 117  
WAP Browser (Menu 8.2).................................... 118  
Downloads (Menu 8.3) ....................................... 124  
Solving Problems.......................................... 127  
Access Codes................................................ 130  
Phone Password ............................................... 130  
PIN................................................................. 131  
PUK................................................................ 131  
PIN2............................................................... 132  
PUK2 .............................................................. 132  
Barring Password.............................................. 133  
Health and Safety Information ..................... 134  
Exposure to Radio-Frequency Energy  
(SAR Information) ............................................ 134  
Precautions When Using Batteries....................... 135  
Road Safety..................................................... 137  
Operating Environment ..................................... 139  
Electronic Devices............................................. 139  
Potentially Explosive Atmospheres ...................... 141  
Emergency Calls............................................... 142  
Other Important Safety Information.................... 143  
Care and Maintenance....................................... 144  
Glossary ....................................................... 146  
Index ........................................................... 151  
Quick Reference Card ................................... 155  
6
Important Safety  
Precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road Safety at All Times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching Off When Refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching Off in Aircraft  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Switching Off in Hospitals  
Switch off your phone near medical equipment.  
Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special Regulations  
Meet any special regulations in force in any area  
and always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
7
Important Safety Precautions  
Sensible Use  
Unpacking  
Your package contains the following items:  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on.  
Emergency Call  
Ensure the phone is switched on and in service. Key  
in the emergency number for your present location,  
Handset  
Travel Adapter  
then press the  
key. If certain features are in  
use, deactivate those features before you can make  
an emergency call. Give all the necessary  
information as accurately as possible. Do not cut off  
the call until given permission to do so.  
Ear-microphone  
Handstrap  
Battery  
Water Resistance  
Your phone is not water-resistance. Keep it dry.  
Accessories and Batteries  
User’s Manual  
Use only Samsung-approved accessories and  
batteries. Use of any unauthorised accessories  
could damage your phone and may be dangerous.  
The items supplied with your phone may be  
different depending on your country.  
Qualified Service  
Only qualified service personnel may install or  
repair your phone.  
In addition, you can obtain the following  
accessories for your phone from your local  
Samsung dealer:  
• Ear-microphone  
• Car holder  
For more detailed safety information, see “Health  
and Safety Information” on page 134.  
• Simple hands-free kit  
• Standard/slim batteries  
• Cigarette lighter adapter  
• Data link cable  
8
9
Your Phone  
Your Phone  
Key(s) Description  
In Menu Mode, scroll through the  
Phone Layout  
menu options and Phonebook  
memory.  
The following illustrations show the main elements  
of your phone:  
In Idle Mode, allow you to access your  
favourite menu options directly. For  
further details about shortcuts, see  
page 97.  
Earpiece  
In Menu Mode, returns to the previous  
menu level and selects the current  
menu respectively.  
Folder  
Display  
When entering text, moves the cursor  
to the left and right respectively.  
In Idle Mode,  
the Write New and allows you to  
allows you to access  
WAP Browser  
key  
Navigation keys  
Soft key (right)  
Power on/off /  
menu exit key  
access the Ring Tone menu option.  
Ear-microphone  
jack  
Perform the functions indicated by the  
text above them, on the bottom line of  
the display.  
Soft key (left)  
Volume/menu  
browse keys  
Alphanumeric  
keys  
(soft keys)  
Dial/menu  
confirmation key  
In Idle Mode, quickly launches the  
WAP (Wireless Application Protocol)  
browser.  
Cancel/  
Microphone  
correction key  
Special  
function keys  
Deletes characters from the display.  
In Menu Mode, returns to the previous  
menu level.  
Antenna  
Service light  
10  
11  
Your Phone  
Your Phone  
Display  
Key(s) Description (continued)  
Makes or answers a call.  
Display Layout  
When held down in Idle Mode, recalls  
the last number dialled or received.  
The display has three areas:  
In Menu Mode, selects a menu  
function or stores information that you  
have entered, such as a name in the  
phone or SIM memory.  
Icons  
Text and  
graphic area  
Ends a call. Also switches the phone  
on and off when held down.  
In Menu Mode, cancels your input and  
returns to Idle Mode.  
Soft key  
indications  
Menu  
Name  
In Idle Mode, quickly accesses your  
voice mail when held down.  
Area  
Description  
First line  
Displays various icons. See  
page 14.  
Enter numbers, letters and some  
special characters.  
Middle lines  
Display messages, instructions  
and any information that you  
enter, number to be dialled, for  
example.  
Enter special characters.  
Perform various functions.  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
(on the side of the phone)  
During a call, adjust the earpiece  
volume.  
In Idle Mode, adjust the keypad tone  
volume.  
In Menu Mode, scroll through the  
menu options and Phonebook  
memory.  
12  
13  
Your Phone  
Your Phone  
Icons  
Icon Description  
Icon Description (continued)  
Shows the received signal strength. The  
greater the number of bars, the stronger  
the signal.  
Shows the level of your battery. The more  
bars you see, the more power you have  
left.  
Appears when a call is in progress.  
Appears when you are out of your home  
area and have logged onto a different  
network, for example, when travelling in  
other countries.  
Backlight  
A backlight illuminates the display and keypad.  
When you press any key or open the folder, the  
backlight turns on. It turns off if no key is pressed  
within a given period of time, depending on the  
Back Light menu option. After one minute, the  
display turns off to conserve your battery power.  
Appears when you are connected to the  
GPRS network.  
Appears when a new text message has  
been received.  
To specify the length of time for which the backlight  
is active, set the Back Light menu option (Menu  
5.6.2). See page 94 for further details.  
Appears when a new voice mail message  
has been received.  
You can also set the phone to use the backlight only  
during a specified period of time, in the Auto Light  
menu option (Menu 5.6.3). See page 94 for further  
details.  
Appears when you are entering text to  
indicate the current text mode.  
Appears when you set an alarm to ring at a  
specified time.  
Appears when the silent mode is active or  
you set the Alert Type menu option  
(Menu 4.3), so that the phone vibrates  
when you receive a call. For further details,  
see page 28 and page 85 respectively.  
Appears when the mute mode is active.  
14  
15  
Your Phone  
Getting Started  
Service Light  
Installing the SIM Card  
The service light is on the folder. It flashes when  
services are available on the phone.  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available and so on.  
To activate or deactivate the use of the service  
light, set the Service Light menu option (Menu  
5.6.4). See page 95 for further details.  
Important! The plug-in SIM card and its contacts  
can be easily damaged by scratches  
or bending, so be careful when  
handling, inserting or removing the  
card.  
Keep all SIM cards out of the reach of  
small children.  
Service light  
1. If necessary, switch off the phone by holding  
down the  
displays.  
key until the power-off image  
2. Remove the battery. To do so:  
Pull and hold the battery lock above the  
battery toward the top of the phone.  
Lift the battery away, as shown.  
16  
17  
Getting Started  
Getting Started  
5. Press the battery down until it clicks into place.  
Make sure that the battery is properly installed  
before switching the phone on.  
3. Slide the SIM card into the SIM card socket so  
that it locks the card into position.  
Make sure that the notched corner is at the  
bottom left and the gold contacts of the card  
face into the phone.  
Charging the Battery  
Your phone is powered by a rechargeable Li-ion  
battery. A travel adapter comes with your phone for  
charging the battery. Use only approved batteries  
and chargers. Ask your local Samsung dealer for  
further details.  
Note: When you need to remove the SIM card, slide  
it, as shown, and take it out of the socket.  
You can use the phone while the battery is  
charging, but this causes the phone to charge more  
slowly.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
battery is fully recharged in approximately  
200 minutes.  
4. Place the battery so that the tabs on the end  
align with the slots at the bottom of the phone.  
1. With the battery in position on the phone, plug  
the connector of the travel adapter into the jack  
at the bottom of the phone.  
18  
19  
Getting Started  
Getting Started  
Switching the Phone On or Off  
2. Plug the adapter into a standard AC wall outlet.  
1. Open the folder.  
3. When charging is finished, unplug the adapter  
from the power outlet and from the phone by  
pressing the grey tabs on both sides of the  
connector and pulling the connector out.  
2. Hold down the  
switches on.  
key until the phone  
3. If the phone asks you to enter the phone  
password, enter the password and press the OK  
soft key. The phone password is preset to  
“00000000” at the factory. For further details,  
see page 130.  
4. If the phone asks for a PIN, enter the PIN and  
press the OK soft key. For further details, see  
page 131.  
The phone searches for your network and after  
finding it, the idle screen, illustrated below,  
appears on the display. Now, you can make or  
receive a call.  
Note: You must unplug the adapter before removing  
the battery from the phone during charging;  
otherwise, the phone could be damaged.  
Low Battery Indicator  
When the battery is weak and only a few minutes of  
talk time remain, a warning tone sounds and a  
message repeats at regular intervals on the display.  
When the battery level gets too low, the phone  
turns off automatically.  
Menu  
Name  
Note: The display language is preset to English at  
the factory. To change the language, use  
the Language menu option (Menu 5.4).  
For further details, see page 91.  
5. When you wish to switch the phone off, hold  
down the  
displays.  
key until the power-off image  
20  
21  
Call Functions  
Call Functions  
Ending a Call  
Making a Call  
When you want to finish your call, briefly press the  
key.  
When the idle screen displays, enter the area code,  
phone number and press the key.  
Redialling the Last Number  
Note: If you have checked the Auto Redial option in  
the Extra Settings menu (Menu 5.7), the  
number is redialled automatically up to ten  
times when the person does not answer the  
call or is already on the phone. See page 96 for  
further details.  
The phone stores the numbers you dialled, received  
or missed if the caller is identified. See “Call  
Records” on page 81 for further details.  
To recall any of these numbers:  
1. If you have typed characters on the display,  
Making an International Call  
press the  
key to return to Idle Mode.  
1. Press and hold the 0 key.  
2. Press the  
key to display a list of the last  
The + character appears.  
numbers in the order in which the calls were  
made.  
2. Enter the country code, area code and phone  
number and press the  
key.  
3. Use the  
and  
keys to scroll through the  
numbers until the number you want highlights.  
Correcting the Number  
4.  
To  
Press the  
To clear  
Press the  
dial the number  
edit the number  
key.  
the last digit  
displayed  
C key.  
Edit soft key. Change  
the number as required,  
referring to “Correcting  
the Number” on page 22  
for further details.  
any other digit  
or key until the cursor is  
in the number immediately to the right of the  
digit to be cleared. Press the C  
key. You can also insert a missing  
digit simply by pressing the  
appropriate key.  
the whole  
display  
C key and hold it for more than  
one second.  
22  
23  
Call Functions  
Call Functions  
Making a Call from Phonebook  
Answering a Call  
You can store the phone numbers that you use  
regularly in the SIM card or the phone’s memory,  
which are collectively called Phonebook. Simply  
select the required name to recall the associated  
number. For further details about the Phonebook  
features, see page 31.  
When someone calls you, the phone alerts you by  
ringing and displaying the incoming animation.  
When the caller can be identified, the caller’s phone  
number, or name if stored in your Phonebook,  
displays.  
1. If necessary, open the folder. Press the  
key  
or the Accept soft key to answer the incoming  
call.  
Adjusting the Volume  
If the Anykey Answer option in the Extra  
Settings menu (Menu 5.7) is checked, you can  
press any key to answer a call, except for  
During a call, if you want to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
the  
key and the Reject soft key. See  
Press the  
key to increase the volume level and  
page 96 for details.  
the key to decrease the level.  
If the Active Folder option in the Extra  
Settings menu (Menu 5.7) is checked, you can  
answer the call simply by opening the folder.  
See page 96 for details.  
Note: To reject the call, press and hold one of the  
volume keys before opening the folder, or  
press the Reject soft key or  
key.  
2. End the call by closing the folder or pressing  
the key.  
Note: You can answer a call while using the  
Phonebook or menu features.  
In Idle Mode with the folder open, you can also  
adjust the keypad tone volume using these keys.  
24  
25  
Call Functions  
Call Functions  
Viewing Missed Calls  
3. Press the Select soft key.  
When you are unable to answer a call for any  
reason, you can find out who is calling you, if this  
service is available, so that you can call the person  
back.  
4. Change the number as required.  
5. To  
call the number  
Press the  
The number of missed calls displays on the idle  
screen immediately after a call is missed.  
key.  
To view the missed call immediately:  
1. If the phone is closed, open the folder.  
2. Press the View soft key.  
store the number  
Save soft key and enter  
the name and location  
required. For further  
details, see page 31.  
The number corresponding to the most recent  
missed call displays, if available.  
Deleting a Missed Call  
1. Press the Options soft key.  
3. To  
scroll through the  
Press the  
2. If necessary, press the  
or  
key to  
or  
key.  
highlight the Delete option.  
missed calls  
3. Press the Select soft key.  
call the number  
displayed  
key.  
You can press the  
key at any time to exit the  
edit or delete a  
Select soft key. See  
Missed Call feature.  
missed call number  
below.  
Note: You can access the Missed Call feature at any  
time by selecting the Missed Calls menu  
option (Menu 3.1). For further details, see  
page 81.  
Editing a Missed Call Number  
Note: When the number corresponding to the missed  
call is not available, the Edit Number option  
does not display.  
1. Press the Options soft key.  
2. Press the  
or  
key to highlight the Edit  
Number option.  
26  
27  
Call Functions  
Selecting Functions  
and Options  
Switching Quickly to the Silent Mode  
Your phone offers a set of functions that allow you  
to customise it. These functions are arranged in  
menus and sub-menus, accessed via the two soft  
Silent Mode is convenient when discretion is  
required and you wish to stop the phone from  
making noise, in a theatre for example.  
keys marked  
and . Each menu and sub-menu  
In Idle Mode, to switch your phone quickly to the  
allows you to view and alter the settings of a  
particular function.  
silent mode, simply press and hold down the  
key  
until the “Silent Mode” message and the Vibration  
icon ( ) display.  
The roles of the soft keys vary according to the  
current context; the label on the bottom line of the  
display just above each key indicates its current  
role.  
In the silent mode, your phone changes the sound  
settings as follows:  
Option  
New Setting  
Example:  
Alert Type (Menu 4.3)  
Vibration  
Keypad Tone (Menu 4.4) Off  
Service Provider  
07:30  
Thu 09 Oct  
Message Tone (Menu 4.5) Light Only  
Folder Tone (Menu 4.6)  
Power On/Off (Menu 4.7) Off  
Extra Tones (Menu 4.8) OFF  
Off  
Menu  
Name  
To exit and reactivate the previous sound settings,  
press and hold the key again until “Exit Silent  
Mode” appears. The Vibration icon ( ) no longer  
displays.  
Press the right soft  
key to access the  
Phonebook menu.  
Press the left soft  
key to access Menu  
Mode.  
28  
29  
Selecting Functions and Options  
Phonebook  
You can store phone numbers and their  
To view various functions/options available and  
select the one required:  
corresponding names in the memory of your SIM  
card. In addition, you can store up to 500 numbers  
in the phone’s memory. The SIM card and phone  
memories, although physically separate, are used  
as a single entity, called Phonebook.  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
Select soft key or  
the key.  
Storing a Number with a Name  
• function displayed  
• option highlighted  
There are two ways to store a number:  
view the next function  
or highlight the next  
option in a list  
key or  
left side of the phone.  
key on the  
• Using the Save soft key in Idle Mode  
• Using the New Entry option in the Phonebook  
menu  
move back to the  
previous function or  
option in a list  
key or  
left side of the phone.  
key on the  
Storing a Number in Idle Mode  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in Phonebook.  
move back up one  
level in the structure key.  
key,  
soft key or C  
exit the structure  
without changing the  
settings  
key.  
1. Enter the number you want to store.  
Note: If you make a mistake while entering a  
number, correct it using the  
further details, see page 22.  
C
key. For  
In some functions, you may be asked for a  
password or PIN. Enter the required code and press  
the OK soft key.  
2. To save the number, press the Save soft key.  
3. Choose an icon to identify the category of the  
number to be stored. Three categories are  
available:  
: Mobile phone number  
: Office number  
: Home number  
To select the category, press the or key and  
press the Select soft key.  
30  
31  
Phonebook  
Phonebook  
Storing a Number Using the Phonebook  
Menu  
4. Enter a name and press the OK soft key.  
The maximum length of a name depends on  
your SIM card. For further details about how to  
enter characters, see page 41.  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to New Entry by pressing the  
or  
The phone now displays the first free location in  
the last memory used to save a number and  
name. When that memory is full, the first free  
location in the other memory displays.  
key and press the Select soft key.  
3. Choose an icon to identify the category of the  
number to be stored by pressing the or key,  
and press the Select soft key.  
5. Press the right soft key, labelled To Card or To  
Phone, to switch between the phone and card  
memories.  
Note: The E-mail icon (  
) is available in this  
step. It allows you to save an e-mail  
address instead of a phone number.  
Note: If you change phones, any numbers stored  
in your SIM card memory will automatically  
be available with the new phone, whereas  
any numbers stored in the phone’s memory  
must be reentered.  
4. Enter a name and press the OK soft key.  
The maximum length of a name depends on  
your SIM card. For further details about how to  
enter characters, see page 41.  
6. If you do not want to save the number and  
name in the suggested location, press the C key  
to clear the location number and enter your  
preferred location by pressing the number keys.  
5. Enter the number or address you want to store  
and press the Save soft key.  
6. Continue the procedure from Step 5 on page 32  
to store the number.  
7. Press the OK soft key to store the name and  
number.  
After storing, the phone displays the Phonebook  
entry or name just created.  
Using Phonebook Entry Options  
While accessing any Phonebook entry, press the  
Options soft key to access the options for the  
entry.  
8. To  
use the entry  
Press the  
Options soft key.  
options  
Further details about the  
options, see page 33.  
To  
Press the  
return to the idle  
screen  
key.  
select the  
highlighted option  
Select soft key or  
the key.  
32  
33  
Phonebook  
To  
Phonebook  
For further details about how to change caller group  
properties, see page 37.  
Press the  
highlight a  
different option  
or  
key until the  
Add Entry: allows you to add a new number to the  
name.  
required option highlights.  
The following options are available:  
Searching for a Number in  
Phonebook  
Paste: allows you to paste the number into the  
normal dialling mode. Use this option to dial a  
number similar to one in Phonebook, such as a  
different extension in the same office.  
After storing numbers in Phonebook, you can  
search for them in two ways; by name and by caller  
group.  
Use the C key to change the number as required;  
see page 22 for further details. When you are ready  
to dial, press the  
key.  
Searching for a Number by Name  
Edit: allows you to edit the Phonebook entry.  
1. When the idle screen displays, press the Name  
Select One Entry to change one number in the  
selected name. If you change the name, the  
number is saved separately  
soft key.  
2. Press the Select soft key when Search  
highlights. You are asked to enter a name.  
3. Enter the first few letters of the name that you  
wish to find.  
Erase: allows you to erase the name and number  
from Phonebook. You are asked to confirm that you  
wish to erase the name and number by pressing the  
Yes soft key.  
The Phonebook entries are listed, starting with  
the first entry matching your input.  
Copy: allows you to copy the number to another  
location. Use this option to store a number similar  
to one already in the memory; once copied, edit the  
number and store it in Phonebook.  
4. To  
view the  
Press the  
View soft key.  
highlighted entry  
Caller Group: allows you to organise your  
Phonebook entries in up to 10 caller groups so that  
the phone alerts you in a specific way when a  
person from one of your groups calls you. Select  
one of ten groups available.  
select a different  
entry  
or  
key until the  
entry you want is  
highlighted.  
look for a name  
starting with a  
different letter  
key labelled with the  
letter.  
To remove an entry from a group, select the No  
Group option.  
34  
35  
Phonebook  
Phonebook  
Editing a Caller Group  
5. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key to access the Phonebook entry options;  
for further details, see page 33.  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to Group Edit by pressing the  
or  
key and press the Select soft key.  
Searching for a Number by Caller Group  
3. Scroll through the group list by pressing the  
or key.  
1. When the idle screen displays, press the Name  
soft key.  
4. When the group highlights, press the Options  
2. Scroll to Group Search by pressing the  
or  
soft key.  
key and press the Select soft key. You are  
asked to enter a group name.  
5. Select each option and change the settings, as  
required. The following options are available:  
3. Enter the first few letters of the group name that  
you wish to find.  
Call Ring Tone: allows you to set a ring tone  
to be used when you receive a voice call from  
a person in the group.  
The caller groups are listed, starting with the  
first group matching your input.  
SMS Tone: allows you to set a ring tone to be  
used when you receive a text message from a  
person in the group.  
4. Scroll to the group you want by pressing the  
or  
key and press the View soft key.  
The Phonebook entries in the caller group are  
listed.  
Graphic: allows you to set a graphic icon to  
be displayed when you receive a voice call  
from a person in the group.  
5. To  
Press the  
Group Name: allows you to assign a name to  
the group. For further details about how to  
enter characters, see page 41.  
view the highlighted  
entry  
View soft key.  
6. When you finish changing the settings, press the  
select a different  
entry  
or  
key until the  
C or  
key.  
entry you want  
highlights.  
6. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key to access the Phonebook entry options;  
for further details, see page 33.  
Speed-dialling  
Once you have stored phone numbers in the SIM  
card, you can set up to eight speed-dial entries and  
then dial them easily whenever you want, simply by  
pressing the associated number key.  
36  
37  
Phonebook  
Phonebook  
Setting Up Speed-dial Entries  
Speed-dialling from Phonebook  
To speed-dial the numbers assigned to keys 2 to 9,  
press and hold the appropriate key.  
1. When the idle screen displays, press the Name  
soft key.  
Note: Memory location 1 is reserved for your Voice Mail  
2. Scroll to Speed Dial by pressing the  
or  
server number.  
key and press the Select soft key.  
3. Select the key to which you wish to assign the  
speed-dialling number, from the 2 to 9 key, and  
press the OK soft key.  
Deleting All of the Phonebook Entries  
Note: If you have already assigned a number to  
the key, the Options soft key replaces the  
OK soft key. Go to Step 6.  
You can delete all of entries in the selected memory  
or both memories.  
1. When the idle screen displays, press the Name  
4. Select a Phonebook entry from the list and press  
soft key.  
the View soft key.  
2. Scroll to Delete All by pressing the  
or  
5. Select a number, if the entry has more than one  
key and press the Select soft key.  
number, by pressing the  
press the Select soft key.  
or  
key and  
3. To place a check mark by the memory you want  
to empty, All, Card Memory, or Phone Memory,  
press the Mark soft key.  
6. Once you have assigned a number to the  
selected key, you can use the following options  
by pressing the Options soft key:  
4. You can remove the check mark by pressing the  
Unmark soft key.  
Change: allows you to assign a different  
number to the key.  
5. When you are finished marking, press the Delete  
soft key to delete the entries in the selected  
memory.  
Erase: allows you to clear the setting so that  
no number is assigned to the key.  
6. Enter the phone password and press the OK soft  
Erase All: allows you to clear the settings for  
all keys so that no numbers are assigned to  
any of the keys.  
key.  
Note: The password is preset to “00000000” at the  
Number: allows you to view the number  
assigned to the key.  
factory. To change it, see page 92.  
7. When the confirming message appears, press the  
7. When you finish setting the options, press the C  
Yes soft key.  
or  
key.  
To cancel the deletion, press the No soft key.  
38  
39  
Phonebook  
Entering Text  
When using your phone, you will often need to  
enter text, such as, when storing a name in  
Phonebook, creating your personal greeting or  
scheduling events on your calendar. You can enter  
alphanumeric characters by using your phone’s  
keypad.  
Checking the Memory Status  
You can check how many names and numbers are  
stored in Phonebook; SIM card and phone  
memories. You can also see the capacity of both  
memories.  
Your phone has the following text input modes:  
1. When the idle screen displays, press the Name  
T9 mode  
soft key.  
This mode allows you to enter words with only  
one keystroke per letter. Each key on the keypad  
has more than one letter – when you press the 5  
key once, J, K or L displays. The T9 mode  
automatically compares your keystrokes with an  
internal linguistic dictionary to determine the  
correct word, thus requiring far fewer keystrokes  
than the traditional upper/lower-case character  
modes.  
2. Select the Memory Status option by pressing  
the  
or  
key and press the Select soft  
key.  
3. Press the  
or  
key to view the number of  
existing and remaining entries in the SIM card  
and phone memories.  
4. When you finish checking, press the C or  
key.  
Upper/Lower-case character mode  
These modes allow you to enter letters by  
pressing the key labelled with the required letter  
once, twice, three or four times until the letter  
displays.  
Symbol mode  
This mode allows you to enter various symbols  
and special characters.  
Number mode  
This mode allows you to enter numbers.  
40  
41  
Entering Text  
Entering Text  
Using the T9 Mode  
Changing the Text Input Mode  
The T9 predictive text input mode allows you to  
enter any character using single keystrokes. This  
text input mode is based on a built-in dictionary.  
When you are in a field that allows characters to be  
entered, you should notice the text input mode  
indicator on the display.  
1. When you are in the T9 predictive text input  
mode, start entering a word by pressing keys 2  
to 9. Press each key only once for one letter.  
Example: Writing a text message  
Text input mode  
indicator  
Example: To enter “HELLO” in the T9 mode,  
press the 4, 3, 5, 5 and 6 keys.  
The word that you are typing appears on the  
display. It may change with each key that you  
press.  
Options  
918  
2. Enter the whole word before editing or deleting  
the keystrokes.  
3. If the word is correct, start entering the next  
word.  
To select the  
Press the  
until  
soft key  
Otherwise, press the 0,  
or  
key to  
display alternative word choices for the keys  
that you have pressed.  
T9 mode  
displays.  
See page 43.  
Example: Both “OF” and “ME” have the  
sequence of the 6 and 3 keys. The  
phone displays the most commonly  
used choice first.  
Upper-case  
character mode  
displays.  
See page 44.  
Lower-case  
displays.  
character mode  
See page 44.  
4. Put a space between words by pressing the  
key.  
Symbol mode  
Number mode  
displays.  
See page 46.  
To type words not found in the T9 mode, change  
the text input mode to the upper/lower-case  
character input mode.  
displays.  
See page 46.  
42  
43  
Entering Text  
Entering Text  
To enter full stops, hyphens or apostrophes, press  
the 1 key. The T9 mode applies grammar rules to  
ensure that the correct punctuation is used.  
Refer to the table below for more information about  
the characters available.  
Characters in the Order Displayed  
Key  
Example: the 1 key is used twice to display two  
Lower Case  
Upper Case  
punctuation marks:  
Space  
L
E
T
S
E
A
T
.
To shift the case in the T9 mode, use the  
key.  
There are two cases; Capital Lock ( ) and Initial  
Capital ( ).  
• You can move the cursor by using the and  
keys. To delete letters, press the C key. Press and  
hold the C key to clear the display.  
Note: The characters available may be different  
depending on your language setting (Menu  
5.4).  
Using the Upper/Lower-case  
Character Mode  
To insert a space, press the  
key.  
Use the 1 to 0 keys to enter your text.  
• You can move the cursor by using the and  
keys. To delete letters, press the C key. Press and  
hold the C key to clear the display.  
1. Press the keys labelled with the required letter:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a  
different key. When entering the same letter  
twice or a different letter on the same key, just  
wait for a few seconds for the cursor to move  
to the right automatically, and then select the  
next letter.  
44  
45  
Entering Text  
Using the Symbol Mode  
The symbol mode enables you to insert symbols  
into a text message.  
OK  
918  
Use the navigation keys to scroll to the symbol you  
want to enter and then press the OK soft key to  
insert the highlighted symbol into your message.  
Using the Number Mode  
The Number mode enables you to enter numbers  
into a text message. Press the keys corresponding  
to the digits you want to enter.  
46  
Options During a Call  
Your phone provides a number of control functions  
that you can use during a call.  
Putting a Call on Hold  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if your network supports this  
service. When you have an active call and a call on  
hold, you may switch between the two calls,  
changing the one on hold to active and placing the  
other on hold.  
To place a call on hold, simply press the Hold soft  
key. You can reactivate the call whenever you want,  
by pressing the Unhold soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or  
look it up in Phonebook.  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or alternatively:  
1. Put the current call on hold by pressing the Hold  
soft key.  
2. Make the second call in the normal way.  
47  
Options During a Call  
Options During a Call  
To switch between the two calls, simply press the  
Swap soft key.  
Muting/Sending Key Tones  
These options allow you to turn the key tones off or  
on. If the Mute Keys option is selected, your phone  
does not transmit the key tones. It allows you to  
press keys without hearing annoying key tones  
during a call.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Note: To communicate with answering machines or  
computerised telephone systems, the Send  
Keys option must be selected.  
Switching the Microphone Off (Mute)  
You can temporarily switch your phone’s  
microphone off so that the other person cannot  
hear you.  
Sending DTMF Tones  
You can send the DTMF (dual tone multi-frequency)  
tones corresponding to a number entered during a  
call.  
Example: You wish to say something to another  
person in the room but do not want the  
other person to hear you.  
This option is helpful for entering a password or  
account number when you call an automated  
system, like a banking service.  
To switch the microphone off temporarily:  
1. Press the Options soft key.  
To send the DTMF tones:  
2. If necessary, press the  
key to highlight the  
1. When you are connected to the teleservice  
Mute option.  
system, press the Options soft key.  
3. Press the OK soft key.  
2. Press the  
option.  
key to highlight the Send DTMF  
The other person can no longer hear you.  
To switch the microphone back on:  
1. Press the Options soft key.  
3. Press the OK soft key.  
4. Enter the number you want to send and press  
the OK soft key.  
2. If necessary, press the  
key to highlight the  
The tones of the displayed number are sent.  
Unmute option.  
3. Press the OK soft key.  
The other person can hear you again.  
48  
49  
Options During a Call  
Options During a Call  
Searching for a Number in  
Phonebook  
Answering a Second Call  
You can answer an incoming call while you have a  
call in progress, if your network supports this  
service and you have set the Call Waiting menu  
option (Menu 7.3) to Activate; see page 112. You  
will be notified of an incoming call by a call waiting  
tone.  
You can search for a number in Phonebook during a  
call.  
1. Press the Options soft key.  
2. Press the  
option.  
key to highlight the Phonebook  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call.  
3. Press the OK soft key.  
The first call is automatically put on hold.  
The Phonebook entries are listed.  
2. To switch between the two calls, press the Swap  
4. Enter the name that you wish to find.  
soft key.  
If you enter the first few letters of the name, the  
Phonebook entries are listed, starting with the  
first entry matching your input.  
3. To end the call on hold, press the Options soft  
key and select the End Held Call option.  
To end the current call, press the  
key.  
5. To view the highlighted entry, press the View  
soft key.  
For further details about the Phonebook feature,  
see page 31.  
Making a Multi-party Call  
A multi-party call is a network service that allows  
up to six people to take part simultaneously in a  
multi-party or conference call. For further details,  
contact your service provider.  
Using the Message Service  
When you receive an SMS (Short Message Service)  
message during a call, the Message icon (  
flashes on the display. The SMS Service option  
enables you to use this feature.  
)
Setting up the Multi-party Call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
For further details about the Message feature, see  
page 61.  
50  
51  
Options During a Call  
Options During a Call  
3. To join the first participant to the multi-party  
call, press the Options soft key and select the  
Join option. Press the OK soft key.  
Dropping One Participant  
1. Press the Options soft key and choose the  
Select One option. Press the OK soft key.  
4. To add a new person to the multi-party call, call  
the person in the normal way and press the  
Options soft key. Select the Join option and  
press the OK soft key.  
The list of call participants appears.  
2. Select a person from the list by pressing the  
or  
key and press the Select soft key or the  
key.  
You can add incoming callers by answering the call,  
pressing the Options soft key, and selecting the  
Join option. Repeat as required.  
3. Select Remove by pressing the  
key and  
press the OK soft key.  
The call ends with that participant, but you can  
continue to talk with the other participants.  
Having a Private Conversation With One  
Participant  
4. End the multi-party call by closing the folder or  
1. Press the Options soft key and choose the  
pressing the  
key.  
Select One option. Press the OK soft key.  
The list of call participants appears.  
2. Highlight a person by pressing the  
or  
key, and press the Select soft key or the  
key.  
3. When the Private option highlights, press the  
OK soft key.  
Now you can talk privately with that person. The  
other participants can still converse with each  
other.  
4. To return to the multi-party call, press the  
Options soft key and select the Join option.  
Press the OK soft key.  
All the multi-party call participants can now hear  
each other.  
52  
53  
Using the Menus  
Using the Menus  
The phone offers a range of functions that allow you  
to tailor it to your needs. These functions are  
arranged in menus and sub-menus.  
Accessing a Menu Function by Using  
its Shortcut  
The menu items, such as menu, sub-menus and  
options, are numbered and can be accessed quickly  
by using their shortcut numbers. The shortcut  
number is shown at the bottom right next to the  
soft key on the display. Simply press the Menu soft  
key and enter the required number.  
The menus and sub-menus can be accessed by  
scrolling with the navigation keys or by using the  
shortcuts.  
Accessing a Menu Function by Scrolling  
Note: The numbers assigned to each menu option are  
indicated on the list on page 56. They may not  
match the menu number on the phone,  
depending on the services supported by your  
SIM card.  
1. In Idle Mode, press the Menu soft key to access  
Menu Mode.  
2. Scroll with the  
or  
key to reach a main  
menu, such as Phone Settings. Press the  
Select soft key or the key to enter the menu.  
Example: Accessing the Language option.  
1. Press the Menu soft key.  
3. If the menu contains any sub-menus, such as  
Language, you can access them by scrolling  
2. Press the 5 key for Phone Settings.  
with the  
or  
key and pressing the Select  
soft key or the key.  
3. Press the 4 key for Language.  
If the menu that you have selected contains  
further options, repeat this step.  
The languages available display.  
4. To  
Press the  
List of Menu Functions  
scroll through the  
menus  
or  
key or use  
and keys on  
the  
The following list shows the menu structure  
available and indicates the number assigned to  
each option and the page where you can find a  
description of each feature.  
the left side of the  
phone.  
confirm the chosen  
setting  
Select soft key or the  
key.  
Note: If you use a SIM AT card that provides  
additional services, the SIM AT menu displays  
when you press the Menu soft key to enter  
Menu Mode. For further details, refer to your  
SIM card instructions.  
return to the previous  
menu level  
soft key or the  
key.  
exit the menu without  
changing the settings  
key.  
54  
55  
Using the Menus  
Using the Menus  
1. Text Messages (see page 61)  
3. Call Records (see page 81)  
1.1 Inbox  
1.2 Outbox  
1.3 Write New  
1.4 Templates  
1.5 Settings  
1.5.1 Setting 1*  
1.5.2 Setting 2  
1.5.3 Common Setting  
1.6 My Objects  
3.1 Missed Calls  
3.2 Received Calls  
3.3 Dialled Calls  
3.4 Delete All  
3.4.1 Missed Calls  
3.4.2 Received Calls  
3.4.3 Dialled Calls  
3.5 Call Time  
3.5.1 Last Call Time  
3.5.2 Total Sent  
3.5.3 Total Received  
3.5.4 Reset Timers  
3.6 Call Cost*  
*
1.6.1 My EMS Melody  
1.6.2 My EMS Picture  
1.6.3 My EMS Animation  
1.6.4 Delete All  
1.7 Memory Status  
1.7.1 SIM Memory  
1.7.2 PHONE Memory  
1.7.3 CB Memory  
1.7.4 Delete All  
3.6.1 Last Call Cost  
3.6.2 Total Cost  
3.6.3 Max Cost  
3.6.4 Reset Counters  
3.6.5 Set Max Cost  
3.6.6 Price/Unit  
1.8 Voice Mail  
1.8.1 Connect to Voice Server  
1.8.2 Voice Server Number  
1.9 Broadcast  
4. Sound Settings (see page 84)  
4.1 Ring Tone  
4.2 Ring Volume  
4.3 Alert Type  
4.4 Keypad Tone  
4.5 Message Tone  
4.5.1 SMS Tone  
4.5.2 SMS-CB Tone  
4.6 Folder Tone  
4.7 Power On/Off  
4.8 Extra Tones  
1.9.1 Read  
1.9.2 Receive  
1.9.3 Channel List  
1.9.4 Language  
2. Picture Messages (see page 73)  
2.1 Inbox  
2.2 Outbox  
2.3 Write New  
2.4 Delete All  
2.4.1 Inbox  
2.4.2 Outbox  
2.5 Setup  
2.6 MMS Profile  
* Shown only if supported by your SIM card.  
* Shown only if supported by your SIM card.  
56  
57  
Using the Menus  
Using the Menus  
5. Phone Settings (see page 89)  
6. Organiser (continued)  
5.1 My Settings  
5.1.1 Wallpaper  
5.1.2 Menu Style  
5.2 Greeting Message  
5.3 Own Number  
5.4 Language  
6.4 Alarm  
6.4.1 Once Alarm  
6.4.2 Daily Alarm  
6.4.3 Morning Call  
6.4.4 Remove Alarm  
6.4.5 Autopower  
6.5 Calculator  
5.5 Security  
5.5.1 PIN Check  
5.5.2 Change PIN  
5.5.3 Phone Lock  
5.5.4 Change Password  
5.5.5 SIM Lock  
6.6 Currency Exchange  
7. Network Services (see page 108)  
7.1 Call Diverting  
5.5.6 FDN Mode*  
5.5.7 Change PIN2*  
5.6 Display Settings  
5.6.1 Contrast  
7.1.1 Divert Always  
7.1.2 Busy  
7.1.3 No Reply  
7.1.4 Unreachable  
7.1.5 Cancel All  
5.6.2 Back Light  
5.6.3 Auto Light  
5.6.4 Service Light  
5.6.5 Graphic Logo  
5.7 Extra Settings  
5.8 Short Cut  
5.8.1 Key Up  
5.8.2 Key Down  
5.9 Reset Settings  
7.2 Call Barring  
7.2.1 All Outgoing  
7.2.2 International  
7.2.3 International Except to Home  
7.2.4 All Incoming  
7.2.5 Incoming While Abroad  
7.2.6 Cancel All  
7.2.7 Change Barring Password  
7.3 Call Waiting  
7.4 Network Selection  
7.5 Caller ID  
7.6 Closed User Group  
7.6.1 Index List  
6. Organiser (see page 98)  
6.1 Calendar  
6.2 To Do List  
6.3 Time & Date  
6.3.1 Set Time  
6.3.2 Set Date  
6.3.3 World Time  
6.3.4 Time Format  
7.6.2 Outside Access  
7.6.3 Default Group  
7.6.4 Deactivate*  
*Shown only if the Closed User Group Feature is active.  
* Shown only if supported by your SIM card.  
58  
59  
Using the Menus  
Text Messages  
8. Funbox (see page 117)  
Short message service (SMS) allows you to send  
and receive short text message to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to make short messages  
including simple pictures, melodies, animations.  
You must subscribe to the message service of your  
service provider.  
8.1 Games  
8.1.1 HoneyBall  
8.1.2 HamsterBox  
8.1.3 Bowling  
8.2 WAP Browser  
8.2.1 Home  
8.2.2 Favorite  
8.2.3 http://  
8.2.4 Settings  
8.2.5 Clear Cache  
8.2.6 Push Message  
8.3 Downloads  
8.3.1 Games & More  
8.3.2 Sounds  
When the Message icon (  
) appears, you have  
received new text messages. If the memory is full,  
an error message displays and you cannot receive  
new messages. Use the Delete option in each  
message box to delete obsolete ones.  
8.3.3 Pictures  
8.3.4 DNS Setting  
Inbox (Menu 1.1)  
This message box is used to store the messages  
that you have received.  
When you enter this menu, the list of messages in  
the box displays with the senders’ phone numbers  
or names, if available in your Phonebook.  
1. Select a message from the list and press the  
View soft key to read the message contents.  
2. To scroll through the message, press the  
key.  
or  
3. To scroll to the previous or next messages, press  
the or key.  
60  
61  
Text Messages  
Text Messages  
While reading a message, you can use the following  
options by pressing the Options soft key:  
Outbox (Menu 1.2)  
This message box is used to store the messages  
that you have already sent or will send.  
Delete: allows you to delete the message.  
Send: allows you to resend the message. For  
further details about how to send a message, see  
page 64.  
When you enter this menu, the list of messages in  
the box displays with the recipients’ phone numbers  
or names, if available in your Phonebook.  
Reply: allows you to reply to the sender by sending  
a text message.  
1. Select a message from the list and press the  
View soft key to read the message contents.  
Call Back: allows you to call the sender back.  
2. To scroll through the message, press the  
key.  
or  
Cut Address: allows you to extract the destination  
number and URL/e-mail addresses or phone  
numbers from the message text, so that you can  
save them in your phone’s memory.  
3. To scroll to the previous or next messages, press  
the or key.  
While reading a message, you can use the following  
options by pressing the Options soft key:  
Move: allows you to move the message to another  
memory location, from the SIM card to the phone’s  
memory or vice versa.  
Delete: allows you to delete the message.  
Select Objects: allows you to save media objects,  
such as sounds or images, from the message into  
your phone. You can use the items when writing a  
message. For details, see page 65.  
Send: allows you to resend the message. For  
further details about how to send a message, see  
page 64.  
Cut Address: allows you to extract the destination  
number and URL/e-mail addresses or phone  
numbers from the message text, so that you can  
save them in your phone’s memory.  
Move: allows you to move the message to another  
memory location, from the SIM card memory to the  
phone memory or vice versa.  
Select Objects: allows you to save media objects,  
such as sounds or images, from the message into  
your phone’s memory. You can use the items when  
writing a message. For details, see page 65.  
62  
63  
Text Messages  
Text Messages  
4. If you select a save option, choose the memory  
where the message is saved and press the OK  
soft key.  
Write New (Menu 1.3)  
In this menu option, you can write and send a text  
message.  
5. Enter a destination number and press the OK  
Note: When you add media items to the message, the  
soft key. The message is sent.  
number of characters you can enter decreases.  
Note: If the phone fails to send the message, it will  
ask you if you want to retry. Press the OK soft  
key to confirm. Otherwise, press the Exit soft  
key.  
Creating a Simple Text Message  
1. Create your message.  
Note: For further details about entering  
Creating a Message Using the Options  
1. Create a message.  
characters, see page 41.  
2. When you finish entering the message, press  
the Options soft key. The following options are  
available:  
2. Press the Options soft key.  
Send: allows you to send the message. The  
3. Select one of the following options as required  
message is deleted after sending.  
by using the  
and  
keys and pressing the  
Select soft key.  
Save and Send: allows you to save a copy of  
the message into the specified memory and  
then send the message. You can read the  
message in your Outbox.  
Text Formatting: allows you to format the  
style of the text. For the Size attribute,  
Normal, Large and Small sizes are available.  
For the Underline and Strikethrough  
attributes, select On or Off. The attributes can  
be combined.  
Save: allows you to save the message into the  
specified memory so that it can be sent later.  
You can read the message in your Outbox.  
Add Objects: allows you to add a sound,  
melody, picture or animation to your message.  
Select the category of the object to be added;  
Sound, Melody, Picture and Animation are  
available. In each category, you can select  
various factory-set items or choose an item  
received from other sources, such as the  
Internet or other phones.  
• For more information about the Text  
Formatting, Add Objects, Add Templates,  
Add Phonebook, Add Bookmark and  
Language options, see page 65.  
3. Select Send or Save and Send, and press the  
Select soft key.  
If you want to just save the message, select  
Save. After saving the message, the phone  
returns to the Text Messages menu.  
Add Templates: allows you to apply one of  
the preset message templates to the text.  
Select one of five messages stored in the  
Templates menu option (Menu 1.4); for  
further details, see page 66.  
64  
65  
Text Messages  
Text Messages  
Add Phonebook: allows you to add a  
Phonebook entry in your message. Select one  
from the list.  
Settings (Menu 1.5)  
In this menu option, you can set up default SMS  
information. A setting group is a collection of  
settings required to send messages. The number of  
setting groups available depends on the capacity of  
your SIM card.  
Add Bookmark: allows you to add a web  
page’s address stored in your Favorite list  
(Menu 8.2.2). Select one from the list.  
Language: allows you to change the language  
to be used in the T9 input mode. Select the  
language to be used.  
Note: The last setting you accessed is automatically  
activated for sending messages.  
4. Complete the message, and send or save it by  
following the procedure from Step 2 on page 64.  
Setting x (where x is the setting group number):  
each group has its own sub-menu.  
Service Centre: allows you to store or change the  
number of your message centre, which is required  
when sending messages. You must obtain this  
number from your service provider.  
Templates (Menu 1.4)  
Using this menu option, you can preset up to five  
messages that you use most frequently.  
Default Destination: allows you to store the default  
destination number. The number automatically  
displays on the Destination screen when you create  
a message.  
Scroll through the template list using the  
and  
keys. When the message template you want  
highlights, press the Options soft key.  
Default Type: allows you to set the default message  
type to Text, Fax, Email or Paging. The network  
can convert the messages into the selected format.  
The following options are available:  
Edit: allows you to write a new message or edit the  
message.  
Default Validity: allows you to set the length of time  
your text messages are stored at the message  
centre while attempts are made to deliver them.  
Note: For further details about how to enter  
characters, see page 41.  
Setting Name: allows you to give a name to the  
setting group currently being defined.  
Send Message: allows you to retrieve the selected  
message. Once you have completed the message,  
you can send, save and send, or simply save it. For  
further details about how to send a message, see  
page 64.  
Common Setting: The following options are  
available:  
Reply Path: allows the recipient of your message to  
send you a reply via your message centre, if your  
network supports this service.  
Delete: allows you to delete the selected message.  
You are asked to confirm the deletion by pressing  
the Yes soft key.  
66  
67  
Text Messages  
Text Messages  
Delivery Reports: allows you to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether your  
message has been delivered or not.  
Memory Status (Menu 1.7)  
This menu option shows how many messages are  
currently stored in the SIM, phone and CB (Cell  
Broadcast) memories.  
Bearer Selection: allows you to choose either GSM  
or GPRS, depending on your network.  
You can also delete all of the messages in each  
message box using the Delete All option (Menu  
1.7.4).  
My Objects (Menu 1.6)  
To  
Press the  
In this menu option, you can see the objects you  
saved from the messages into your phone’s  
memory using Select Objects option.  
select a message  
box to empty  
or  
key. To delete all  
of your messages, select All  
Messages.  
Three categories of objects are available:  
place a check mark Mark soft key.  
My EMS Melody  
My EMS Picture  
My EMS Animation  
remove the check  
mark  
Unmark soft key.  
delete the marked  
messages  
Delete soft key.  
To delete an item, press the Delete soft key while  
viewing it.  
When a confirming message displays, press the Yes  
soft key to confirm.  
You can delete all of the items using the Delete All  
option (Menu 1.6.4).  
To  
Press the  
select a category to  
clear  
or  
key. To delete  
all of your objects, select  
All Object.  
place a check mark  
on the category  
Mark soft key.  
remove the check  
mark  
Unmark soft key.  
Delete soft key.  
delete the marked  
objects  
When a confirming message displays, press the Yes  
soft key to confirm.  
68  
69  
Text Messages  
Text Messages  
Voice Mail (Menu 1.8)  
Broadcast (Menu 1.9)  
This menu option provides you with a way of  
accessing your voice mailbox, if your network  
supports this service.  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Cell broadcast messages display as soon as  
they are received, provided that:  
The following options are available:  
• the phone is in Idle Mode.  
Connect to Voice Server: before using this  
feature, you must enter the voice server number  
obtained from your service provider (see menu  
option 1.8.2). You can then select this option and  
simply press the OK soft key to listen to your  
messages.  
• the Receive option is set to Enable.  
• the message channel is currently active on the  
channel list.  
The following options are available:  
Read: lets you view the received message. The  
Volatile box displays the messages from the  
network, but loses its contents as soon as the  
phone is switched off. Scroll through the message  
To quickly connect to the voice server, press and  
hold down the 1 key in Idle Mode.  
Voice Server Number: allows you to change the  
voice mail server number, if necessary.  
by using the  
and  
keys.  
While reading a message, press the Save soft key  
to store the message in the Archive box for later  
retrieval.  
To  
Press the  
enter the server  
number  
corresponding numeric  
keys.  
Receive: allows you to enable or disable the  
reception of broadcast messages.  
correct a digit  
C key.  
move the cursor  
to the left/right  
without clearing  
the digit  
or key.  
Channel List: allows you to indicate the channels  
from which you wish to receive broadcast  
messages. The following options are available:  
Select: use to enable or disable channels on the list  
by marking or unmarking them respectively. A  
check mark displays in front of each selected  
channel.  
Note: Voice Mail is a network feature. Please contact  
your service provider for further details.  
Add Channel: use to enter the ID and title for a new  
channel.  
70  
71  
Text Messages  
Picture Messages  
Delete: use to remove a channel from the list.  
Multimedia Message Service (MMS) is a messaging  
service very similar to Short Message Service  
(SMS). It provides automatic and immediate  
delivery of personal multimedia messages from  
phone to phone or from phone to e-mail.  
Edit: use to change the ID and title of an existing  
channel.  
Language: allows you to select your preferred  
language to display cell broadcast messages.  
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice and audio clips. An MMS  
message is a multimedia presentation in a single  
entry. It is not a text file with attachments.  
Please contact your service provider for more  
information.  
Using the MMS feature, your phone can receive  
multimedia messages. You can also send picture  
messages, which are short messages that contain  
images, such as your photos or graphics you  
downloaded from the Internet. This function is  
available only if it is supported by your service  
provider. Only phones that offer picture message  
features can receive and display picture messages.  
Inbox (Menu 2.1)  
Viewing a Message When You Receive it  
When a new multimedia message comes in, the  
display shows the text notification along with the  
sender’s number.  
1. Press the Select soft key to view the message.  
The display shows brief information about the  
message, such as the sender’s number, the  
message size and the subject.  
If you want to view the message later in the  
Inbox, press the Exit soft key.  
72  
73  
Picture Messages  
Picture Messages  
2. To scroll through the message, press the  
key.  
or  
Cut Address: allows you to extract the sender’s  
number or address from the message, so that you  
can dial it or save it in Phonebook.  
While viewing a message, press the Options soft  
key to use the following options:  
Forward: allows you to forward the message to  
another person.  
Retrieve: shows you the message contents.  
Save Picture: allows you to save an image from  
the message into your phone. Images are in the  
Pictures folder in the Downloads menu (Menu  
8.3)  
Delete: deletes the message.  
More Information: shows you detailed  
information about the message.  
Save Sound: allows you to save a sound from the  
message into the Sounds folder in the Downloads  
menu (Menu 8.3).  
Viewing a Received Message in the Inbox  
When you access the Inbox menu option (Menu  
2.1), the list of multimedia messages you received  
displays with the senders’ phone numbers, if they  
are available in your Phonebook, or subjects.  
Information: shows you information about the  
message, such as subject, sender’s address, or  
message size.  
1. Select the message and press the Select soft  
key to view the message.  
Outbox (Menu 2.2)  
2. To scroll through the message, press the  
key.  
or  
When you access this menu option, the list of the  
picture messages you saved displays.  
While viewing a message, you can choose the  
Message options by pressing the Options soft key.  
1. Select the required message and press the  
Select soft key to view the message contents.  
If you are viewing a new message, the options are  
the same as when you view a message as soon as  
you receive it. See the previous section.  
2. To scroll through the message, press the  
key.  
or  
When you are reviewing a message, the following  
options are available:  
While viewing a message, you can use the following  
options by pressing the Options soft key:  
Delete: deletes the message.  
Delete: deletes the message.  
Reply: allows you to reply to the sender by sending  
a text or picture message.  
Cut Address: allows you to extract the destination  
numbers or addresses from the message, so that  
you can dial a number or save one of them in  
Phonebook.  
Call Back: allows you to call the sender back.  
74  
75  
Picture Messages  
Picture Messages  
Send: allows you to resend the message.  
4. Repeat steps 2 and 3 until you finish creating  
your message.  
Edit Message: allows you to change the message  
contents, picture or text.  
5. If you want to change the added items, press  
the  
or  
key to highlight one and press  
the Options soft key.  
Write New (Menu 2.3)  
The following options are available:  
Edit: allows you to change text or replace the  
image with another.  
This menu option allows you to create a new picture  
message and then send it to multiple destinations.  
Delete: deletes the item from your message.  
Send: allows you to send the message.  
Creating and Sending a Picture Message  
Save: saves the message in your Outbox  
(Menu 2.2) for later use.  
1. Enter the subject of your message and press the  
OK soft key.  
6. When you finish creating the message, select  
For further details about entering characters,  
see page 41.  
Send from the options.  
7. Choose one of the following options and press  
2. Press the Options soft key and add the  
message contents using one of the following  
options:  
the Select soft key:  
Phone Number: allows you to enter the  
desired phone number.  
Add Text: Enter the message text and press  
the OK soft key.  
E-Mail: allows you to enter the e-mail address  
of the recipient to send the message as an e-  
mail.  
Add Picture: allows you to add a picture  
stored in the Pictures folder in the  
Downloads menu (Menu 8.3). Choose a  
picture and press the Select soft key.  
Phone Book: allows you to recall a phone  
number or e-mail address from your  
Phonebook.  
Send: allows you to send the message. Use  
this option when you finish creating the  
message.  
8. Enter a number or an address, or select an entry  
from Phonebook.  
Save: saves the message in your Outbox  
(Menu 2.2) for later use. Use this option  
when you finish creating the message.  
9. When the correct number or address displays,  
press the OK soft key.  
10.If you want to send the message to multiple  
destinations, select Add Destination and press  
the Select soft key.  
3. When the added content displays, press the  
key to highlight Add Here.  
76  
77  
Picture Messages  
Picture Messages  
11.Repeat steps 7 to 10, as needed. You can enter  
up to 10 destinations.  
Read Reply: When this option is checked, your  
phone sends a request for a reply along with your  
message to the recipient  
If you want to edit the destinations, select one  
and press the Select soft key. You can change  
or delete it.  
Auto Download: When this option is checked,  
your phone automatically downloads the received  
pictures or sounds.  
12.After entering the destinations, press the Select  
soft key when Send Message highlights.  
Your phone sends the message.  
MMS Profile (Menu 2.6)  
In this menu option, you can configure various  
settings that are required when you send or receive  
picture messages.  
Delete All (Menu 2.4)  
You can delete all of the messages in Inbox or  
Outbox.  
Notes  
:
• The last profile you accessed is activated for sending  
messages.  
• In most cases, you don’t need to change these  
settings. If you change them without the service  
provider’s instructions, the MMS feature may not  
work properly.  
When a confirming message appears, press the Yes  
soft key to confirm.  
Setup (Menu 2.5)  
For each profile, the following options are available:  
You can change the default settings for sending or  
receiving picture messages.  
Profile Name: enter the name that you wish to  
assign to the MMS server.  
To place or remove a check mark on an option,  
press the Select soft key.  
Connection URL: enter the URL address of your  
MMS server.  
The following options are available:  
Security: select a data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-Secure.  
Hide ID: When this option is checked, your phone  
number does not display on the recipient’s phone.  
IP Address: enter the gateway address required to  
connect to the MMS server.  
Delivery Report: When this option is checked, the  
network informs you whether or not your message  
has been delivered.  
User Name: enter the user ID required to connect  
to the MMS server.  
78  
79  
Picture Messages  
Call Records  
Password: enter the password required to connect  
to the MMS server.  
In this menu, you can view the:  
• calls you missed, received or dialled.  
• length of your calls.  
APN: enter the access point name used for the  
address of the MMS server.  
• cost of your calls.  
For further details, contact your service provider.  
Note: You can access the numbers in the three types  
of call records by pressing the  
Mode.  
key in Idle  
Missed Calls (Menu 3.1)  
This menu option lets you view the last 20 numbers  
of the calls you received, but did not answer.  
The number and name, if available, display  
together with the date and time when the call was  
received. By pressing the Options soft key, you  
can:  
• delete the call from the list.  
• edit the number, if available, and dial it or save it  
in Phonebook.  
Received Calls (Menu 3.2)  
This menu option lets you view the last 20 numbers  
of the calls you received.  
The number and name, if available, display  
together with the date and time when the call was  
received. By pressing the Options soft key, you  
can:  
• delete the call from the list.  
• edit the number, if available, and dial it or save it  
in Phonebook.  
80  
81  
Call Records  
Call Records  
Total Received: total length of all calls received  
since the timer was last reset.  
Dialled Calls (Menu 3.3)  
This menu option lets you view the last 20 numbers  
you dialled.  
Reset Timers: option used to reset the call timers.  
You must first enter the phone password (see  
page 130) and then press the OK soft key.  
The number and name, if available, display  
together with the date and time when the call was  
made. By pressing the Options soft key, you can:  
Call Cost (Menu 3.6)  
• delete the number.  
• edit the number and dial it or save it in  
Phonebook.  
This network feature lets you view the cost of calls.  
This option is shown only when it is supported by  
your SIM card.  
The following options are available:  
Delete All (Menu 3.4)  
Last Call Cost: cost of the last call made.  
You can delete all of the numbers stored in each call  
record.  
Total Cost: total cost of all calls made since the  
cost counter was last reset. If the total cost exceeds  
the maximum cost set in the Set Max Cost option,  
you can no longer make any calls until you reset the  
counter.  
When a confirming message appears, press the Yes  
soft key to confirm.  
Max Cost: maximum cost set in the Set Max Cost  
option. See below.  
Call Time (Menu 3.5)  
Reset Counters: option used to reset the cost  
counter. You must first enter your PIN2 (see  
page 132) and then press the OK soft key.  
This menu option lets you view the timers for calls  
made and received.  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on  
network features, rounding-off for billing  
purposes and others.  
Set Max Cost: option used to enter the maximum  
cost that you authorise for your calls.You must first  
enter your PIN2 (see page 132) and then press the  
OK soft key.  
The following timers are available:  
Price/Unit: option used to set the cost of one unit;  
this price per unit is applied when calculating the  
cost of your calls. You must first enter your PIN2  
(see page 132) and then press the OK soft key.  
Last Call Time: length of the last call.  
Total Sent: total length of all calls made since the  
timer was last reset.  
82  
83  
Sound Settings  
Sound Settings  
You can use the Sound Settings feature to  
customise various settings, such as the:  
Alert Type (Menu 4.3)  
This menu option allows you to specify how you are  
to be informed of any incoming calls.  
• ring melody, volume and type.  
• sounds made when you press a key, receive a  
message, open/close the folder or switch your  
phone on/off.  
The following options are available:  
Light Only: only the service light flashes; the  
phone neither rings nor vibrates.  
• alert tone made every minute during a call, when  
you make an error or when your call is connected  
to the system.  
Melody: the phone rings using the ring melody  
selected in the Ring Tone menu option  
(Menu 4.1); see page 84.  
Note: When the phone is in the silent mode (see  
page 28), you cannot change the sound  
settings.  
Vibration: the phone vibrates but does not ring.  
Vibra + Melody: the phone just vibrates and then  
saved.  
Ring Tone (Menu 4.1)  
Keypad Tone (Menu 4.4)  
This menu option allows you to select a ring  
melody.  
This menu option allows you to select a tone that  
the phone sounds when you press a key.  
You can choose between many different melodies.  
Each time you select a melody, it plays for a few  
seconds. If you have downloaded any sounds from  
the Internet or optional EasyGPRS programme, you  
can view them in this menu.  
You can choose from Cool, Piano, Tone and Beep.  
To turn the sound off, select Off.  
Ring Volume (Menu 4.2)  
This menu option allows you to adjust the ring  
volume to one of five levels.  
Use the  
and  
keys or the volume keys on  
the left side of the phone to increase or decrease  
the volume.  
84  
85  
Sound Settings  
Sound Settings  
Message Tone (Menu 4.5)  
Folder Tone (Menu 4.6)  
This menu option allows you to select how the  
phone informs you that a new message has been  
received.  
This menu option allows you to select a melody that  
the phone sounds when you open or close the  
folder.  
You can choose either Future or Crystal. To turn  
the sound off, select Off.  
SMS Tone (Menu 4.5.1)  
This menu option allows you to select how the  
phone informs you that a new SMS message has  
been received.  
Power On/Off (Menu 4.7)  
The following options are available:  
Off: the phone does not use the SMS tone.  
Light Only: the service light flashes.  
Vibration: the phone vibrates.  
This menu option allows you to select a melody that  
the phone sounds when it is switched on and off.  
You can choose either Classical or Cheerful. To  
turn the sound off, select Off.  
Single Beep: the phone beeps once.  
Extra Tones (Menu 4.8)  
SMS Tone x: the phone uses one of several SMS  
tones.  
You can customise various other tones for your  
phone.  
SMS-CB Tone (Menu 4.5.2)  
To turn a given  
tone  
Press the  
This menu option allows you to select how the  
phone informs you that a new cell broadcast (CB)  
message has been received.  
on  
ON soft key.  
A check mark displays in  
front of the option.  
The following options are available:  
Off: the phone does not use the CB tone.  
Light Only: the service light flashes.  
Vibration: the phone vibrates.  
off  
OFF soft key.  
The check mark no longer  
displays.  
Single Beep: the phone beeps once.  
SMS-CB Tone x: the phone uses one of several CB  
tones.  
86  
87  
Sound Settings  
Phone Settings  
The following options are available:  
Many different features of your phone can be  
customised to suit your preferences. All of these  
features are accessed in the Phone Settings  
menu.  
Error Tone: sets whether or not the phone informs  
you that you make a mistake.  
Minute Minder: sets whether or not the phone  
beeps every minute during an outgoing call to keep  
you informed of the length of your call.  
My Settings (Menu 5.1)  
Connect Tone: sets your phone to beep when your  
call is connected to the system.  
You can change the background image of Idle Mode  
and the display style of Menu Mode according to  
your preference.  
Wallpaper (Menu 5.1.1)  
This menu option allows you to change the  
background image to be displayed on the idle  
screen.  
To change the background image:  
1. Scroll through the list by pressing the  
key.  
or  
2. Press the Select soft key when the image you  
want highlights.  
The selected image displays.  
3. After viewing the image, press the Select soft  
key to display it on the idle screen.  
The display asks if you want to display text on  
the screen.  
4. Press the Yes soft key to display the current  
date and time on the wallpaper image.  
To display only the image, press the No soft key.  
88  
89  
Phone Settings  
Phone Settings  
Menu Style (Menu 5.1.2)  
Language (Menu 5.4)  
This menu option allows you to select the menu  
display style. You can choose either Folder Style or  
Page Style.  
You can select a display language. When the  
language option is set to Automatic, the language  
is automatically selected according to the language  
of the SIM card used.  
Greeting Message (Menu 5.2)  
This menu option allows you to set a greeting to be  
displayed briefly when the phone is switched on.  
Security (Menu 5.5)  
The Security feature enables you to restrict the use  
of your phone to the people and the types of calls of  
your choice.  
To  
Press the  
clear the existing  
message  
C key and hold it down until  
the message is cleared.  
Various codes and passwords are used to protect  
the features of your phone. They are described in  
the following sections. See also pages 130-133.  
enter a new  
message  
appropriate alphanumeric  
keys.  
change the text  
input mode  
soft key.  
PIN Check (Menu 5.5.1)  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
For further details about how to enter characters,  
see page 41.  
Note: Before disabling the PIN Check feature, you  
Own Number (Menu 5.3)  
must enter your PIN.  
This feature allows you to:  
To change your PIN, refer to the Change PIN menu  
option (Menu 5.5.2).  
• assign a name to each of your own phone  
numbers registered on your SIM card.  
The following options are available:  
• edit the names and numbers.  
Disable: the phone connects directly to the  
This function is a memory aid, which you can use to  
check your own phone numbers if you need to do.  
network when you switch it on.  
Enable: you must enter the PIN each time the  
Any changes made here do not in any way affect  
the actual subscriber numbers on your SIM card.  
phone is switched on.  
90  
91  
Phone Settings  
Phone Settings  
Change PIN (Menu 5.5.2)  
SIM Lock (Menu 5.5.5)  
This feature allows you to change your current PIN  
to a new one, provided that the PIN Check feature  
is enabled. You must enter the current PIN before  
you can specify a new one.  
When the SIM Lock feature is enabled, your phone  
only works with the current SIM card. You must  
enter the SIM lock code.  
Once you have entered the lock code, you are  
asked to confirm it by entering it again.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
To unlock the SIM, you must enter the SIM lock  
code.  
Phone Lock (Menu 5.5.3)  
FDN Mode (Menu 5.5.6)  
When the Phone Lock feature is enabled, the phone  
is locked and you must enter the phone password  
each time the phone is switched on.  
The FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The password is preset to “00000000” at the  
factory. To change the phone password, see the  
Change Password menu option (Menu 5.5.4).  
The following options are available:  
Disable: you can call any number.  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
Enable: you can only call phone numbers stored in  
the Phonebook. You must enter your PIN2.  
The following options are available:  
Note: Not all SIM cards have a PIN2. If your SIM card  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
does not, this menu option is not displayed.  
To change your PIN2, see the Change PIN2 menu  
option (Menu 5.5.7)  
Enable: you are required to enter the phone  
password when you switch the phone on.  
Change PIN2 (Menu 5.5.7)  
Change Password (Menu 5.5.4)  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
The Change Password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu option is not displayed.  
92  
93  
Phone Settings  
Phone Settings  
Display Settings (Menu 5.6)  
Contrast (Menu 5.6.1)  
Enable: the backlight is used only during the  
specified period of time. Enter the time when the  
phone turns the light on and then turn it off, using  
the appropriate number keys.  
This menu option allows you to adjust the contrast  
of the display screens to see them better in  
different light conditions.  
Service Light (Menu 5.6.4)  
This menu option allows you to select whether or  
not the service light on the folder is used or in  
which colour it flashes.  
Adjust the contrast by using the  
or the volume keys on the left side of the phone.  
and  
keys  
When you are satisfied, press the OK soft key to  
Select one from various colour settings. When the  
phone is ready for use, the service light flashes in  
the appropriate colour.  
save the selection.  
Back Light (Menu 5.6.2)  
If you do not wish to use the service light,  
select Off.  
You can select whether or not the phone uses the  
backlight. A marginal increase in standby/talk time  
can be achieved by turning the backlight off.  
Graphic Logo (Menu 5.6.5)  
Select the length of time the backlight is on. The  
backlight turns on when you press a key or receive  
a call or message and turns off after the specified  
length of time.  
This menu option allows you to display your  
operator’s logo instead of its name.  
Off: the operator name displays in Idle Mode.  
If you do not want to use the backlight, select Off.  
On: the operator logo stored in your phone displays  
in Idle Mode. When no logo has been stored, the  
operator name displays.  
Auto Light (Menu 5.6.3)  
Using this feature, you can specify the time for  
which the backlight is to be used. This feature helps  
conserve your battery power.  
The following options are available:  
Disable: the backlight is used according to the  
setting in the Back Light menu option  
(Menu 5.6.2); see page 94.  
94  
95  
Phone Settings  
Phone Settings  
Extra Settings (Menu 5.7)  
Short Cut (Menu 5.8)  
You can turn the automatic redialling or answering  
features on or off.  
The navigation keys can be used as shortcut keys.  
In Idle Mode, they allow you to access specific  
menu options directly.  
To turn a feature Press the  
To assign a shortcut to a key:  
on  
ON soft key.  
A check mark displays in  
front of the option.  
1. Select the key to be used as a shortcut key by  
pressing the  
or  
key and press the  
Select soft key.  
off  
OFF soft key.  
The check mark no longer  
displays.  
Key Up (  
)
Key Down (  
)
2. Select the menu option to be assigned to the  
key by pressing the or key.  
The following options are available:  
Note: To deactivate a shortcut key, select the  
Auto Redial: when this option is checked, the  
phone makes up to ten attempts to redial a phone  
number after an unsuccessful call.  
None option.  
3. Press the Select soft key to save the selection.  
Note: The interval between two call attempts varies.  
Active Folder: when this option is checked, you  
can simply open the folder to answer a call.  
Reset Settings (Menu 5.9)  
When it is unchecked, you must open the folder and  
press a key, depending on the setting of the  
Anykey Answer option. See below.  
You can easily reset your phone to its default  
settings. To reset your phone:  
1. Select the Reset Settings menu option.  
Anykey Answer: when this option is checked, you  
can answer an incoming call by pressing any key,  
2. Enter the phone password and press the OK soft  
except the  
key and the Reject soft key. To  
key.  
reject the call, press the  
soft key.  
key or the Reject  
Note: The password is preset to “00000000. To  
change this password, see page 92.  
When this option is unchecked, you can only press  
the key or Accept soft key.  
96  
97  
Organiser  
Organiser  
The Organiser feature enables you to:  
Writing a Memo  
• view the calendar and organise your schedule.  
• define a list of things to do.  
To write or edit a memo on a specific date:  
1. Select a date on the calendar, using the  
navigation keys.  
• set the current date and time.  
• set an alarm so that the phone rings at a specific  
time, such as to remind you of an appointment.  
Note: To skip to the previous or next month, press  
the volume keys on the left side of the  
phone.  
• use the phone as a calculator for basic  
mathematical equations or currency exchange  
operations.  
2. Press the Select soft key.  
An empty memo screen displays to allow you to  
enter your memo.  
Calendar (Menu 6.1)  
3. Enter your memo and then press the OK soft  
With the Calendar feature, you can  
• consult the calendar.  
key.  
Note: For further details about how to enter  
• write memos to keep track of your schedule.  
• trigger an alarm, if necessary.  
characters, see page 41.  
You are asked if you wish to set an alarm.  
4. If you want an alarm to ring on the chosen day,  
Consulting the Calendar  
press the Yes soft key.  
When you select the Calendar menu option (Menu  
6.1), the calendar displays. The following options  
are available when you press the Options soft key:  
Otherwise, press the No soft key. The memo is  
saved.  
5. If you pressed the Yes soft key, set the time for  
Search All: displays all of the memos, starting with  
the oldest, regardless of the day. To scroll through  
the alarm and press the OK soft key.  
the memos, press the  
or  
key.  
You can set a melody for the alarm by pressing  
the Melody soft key.  
Delete All: allows you to delete all of the memos.  
You are asked to confirm your action.  
The colour of the date is changed to green to  
indicate that a memo exists.  
Go to Date: allows you to go to a specific date.  
Exit: exits the Calendar feature and returns to Idle  
Mode.  
98  
99  
Organiser  
Organiser  
To Do List (Menu 6.2)  
Editing a Memo  
This feature allows you to:  
When you select a day for which a memo already  
exists, you can press the Edit soft key to edit the  
memo displayed.  
• enter a list of tasks to be done.  
• assign a priority and a deadline to each task.  
• sort the tasks by priority and status mark.  
Note: For further details about how to enter  
characters, see page 41.  
Creating the To Do List  
1. Press the New soft key.  
2. Enter the first task.  
Once you have finished editing the memo, press the  
OK soft key.  
The following options are available when you press  
the Options soft key:  
Note: For further details about how to enter  
characters, see page 41.  
Alarm: allows you to set an alarm to ring at the  
specified time to inform you of the memo. If you  
already set, you can change or delete the alarm.  
3. Press the OK soft key.  
4. Select high, normal or low priority using the  
Erase: allows you to delete the memo.  
and  
keys and press the Select soft key.  
Copy to: allows you to copy the memo to another  
date and/or time.  
5. Enter your deadline.  
Move to: allows you to change the date and/or  
If you do not want to set a deadline, press the  
time of the memo.  
Skip soft key.  
6. Press the OK soft key.  
Editing the To Do List  
When you select the To Do List menu option  
(Menu 6.2), the current contents display with the  
status mark and priority;  
normal and for low.  
for high,  
for  
100  
101  
Organiser  
Organiser  
The following options are available:  
To view the  
details for a  
specific task  
highlight the task.  
press the View soft key.  
scroll through the tasks  
To copy a task  
highlight the task.  
press the Options soft key.  
select the Copy option.  
change the text, priority  
and/or deadline for the  
task, as required.  
using the  
and  
keys,  
if necessary.  
To change the  
status of a  
specific task  
highlight the task.  
press the key to mark  
the task as completed as of  
the current date and time.  
To copy a task to highlight the task.  
the calendar  
press the Options soft key.  
select the Copy to  
Calendar option.  
change the text and  
deadline for the task and/or  
set the alarm, as required.  
or  
highlight the task.  
press the Options soft key.  
select the Mark option.  
select the appropriate status  
(Done or Undo).  
To delete a task  
highlight the task.  
press the Options soft key.  
select the Delete option.  
To create a new  
task  
press the Options soft key.  
select the New option.  
enter the text, priority and  
deadline for the task.  
To delete all tasks press the Options soft key.  
select the Delete All  
option.  
confirm the deletion by  
pressing the OK soft key.  
To edit an  
existing task  
highlight the task.  
press the Options soft key.  
select the Edit option.  
change the text, priority  
and/or deadline for the  
task, as required.  
To exit the To Do press the Options soft key.  
list  
select the Exit option.  
To sort the  
press the Options soft key.  
existing tasks by select the Sort option.  
priority or status  
select the sort criterion  
(High, Low, Done or  
Undo).  
102  
103  
Organiser  
Organiser  
Time & Date (Menu 6.3)  
Alarm (Menu 6.4)  
This menu option allows you to change the current  
time and date displayed. You can also use this  
option to find out what time it is in another part of  
the world.  
This feature allows you to:  
• set the alarm to ring at a specific time.  
• set the phone to switch on automatically and ring  
the alarm even if the phone is switched off  
(Autopower menu option set to Enable).  
The following options are available:  
Set Time: allows you to enter the current time. You  
can choose the time format in the Time Format  
menu option (Menu 6.3.4). See below.  
The following options are available:  
Once Alarm: the alarm rings only once and is then  
deactivated.  
Note: Before setting the time, you must specify your  
Daily Alarm: the alarm rings every day at the  
same time.  
time zone in the World Time menu option  
(Menu 6.3.3).  
Morning Call: the alarm rings to wake you up in  
the morning.  
Set Date: allows you to enter the day, month and  
year.  
To set an alarm:  
World Time: allows you to find out what time it is  
in another part of the world, using the and  
keys.  
1. Choose the type of alarm to be set.  
2. Enter the time using the numeric keys.  
The screen shows the:  
• city name.  
If you want to use the alarm options, press the  
Options soft key. The following options are  
available:  
• current date and time.  
• time difference between the selected city and  
your city if you have set the local time (see below  
for further details) or GMT (by default).  
Remove Alarm: deactivates the current  
alarm.  
Alarm Sound Set: allows you to select the  
alarm melody.  
To select your time zone:  
1. Select the city corresponding to your time zone  
by pressing the or key one or more times.  
The local date and time display.  
3. Press the OK soft key.  
4. When you selected Morning Call in Step 1,  
choose the repeat option, either Monday to  
Friday or Monday to Saturday, and press the  
Select soft key.  
2. Press the Set soft key.  
Time Format: allows you to change the time  
format to 24 Hours or 12 Hours.  
104  
105  
Organiser  
Organiser  
Currency Exchange (Menu 6.6)  
To stop the alarm when it rings, open the folder and  
press the Exit soft key.  
Using this menu option, you can make currency  
conversions.  
Remove Alarm: deactivates all alarm settings.  
1. Enter the current exchange rate of your source  
Autopower: When this option is set to Enable, the  
alarm rings at the specified time, even if the phone  
is switched off.  
currency and press the OK soft key.  
You can insert a decimal point by pressing  
the  
key.  
When the menu option is set to Disable and the  
phone is switched off at the specified time, the  
alarm does not ring.  
2. Enter the amount to convert and press the OK  
soft key.  
The exchange rate and local currency amount  
you entered and the equivalent value in the  
foreign currency display.  
Calculator (Menu 6.5)  
3. Press the Exit soft key to exit the currency  
With this feature, you can use the phone as a  
calculator. The calculator provides basic arithmetic  
functions; addition, subtraction, multiplication and  
division.  
convertor.  
1. Enter the first number using the numeric keys.  
Notes  
To erase mistakes or clear the display, press the  
key.  
:
C
To include a decimal point or a bracket, press the  
left soft key until the symbol you want to use  
displays.  
2. Press the right soft key until the required  
arithmetic symbol appears: + (addition),  
- (subtraction),  
(multiplication), / (division).  
3. Enter the second number.  
4. To view the result, press the  
key.  
5. Repeat steps 1 to 4 as many times as required.  
106  
107  
Network Services  
Network Services  
To set your call diverting options:  
These menu functions are network services. Please  
contact your service provider to check their  
availability and subscribe to them, if you wish.  
1. Select the type of call diverting by pressing the  
or key and then press the Select soft  
key.  
2. Select the type of calls to be diverted by  
pressing the  
Select soft key.  
or  
key and then press the  
Call Diverting (Menu 7.1)  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
The current status displays. If the option has  
already been set, the number to which the calls  
are diverted displays.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
3. To  
Press the  
Call diverting can be set up in the following ways:  
activate call diverting Activate soft key.  
Divert Always: all calls are diverted.  
Go to Step 4.  
Busy: calls are diverted when you are already on  
another call.  
change the call  
number  
Change soft key.  
Go to Step 4.  
No Reply: calls are diverted when you do not  
answer the phone.  
deactivate call  
diverting  
Remove soft key.  
Unreachable: calls are diverted when you are not  
in an area covered by your service provider.  
4. Enter the number to which the calls are to be  
diverted and press the OK soft key.  
To enter an international code, press the 0 key  
until the + sign displays.  
Cancel All: all call diverting options are cancelled.  
You can specify individual diverting options for each  
of the following call types:  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
• Voice calls only  
• Data calls only  
You can deactivate all of the call diverting settings  
by selecting the Cancel All option.  
108  
109  
Network Services  
Network Services  
3. Press the Activate soft key to confirm your  
Call Barring (Menu 7.2)  
settings.  
The call barring network service allows you to  
restrict your calls.  
4. Enter your call barring password supplied by  
your service provider.  
Call barring can be set up in the following ways:  
All Outgoing: calls cannot be made.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
International: international calls cannot be made.  
To deactivate specific call barring settings:  
International Except to Home: when abroad,  
calls can be made only to numbers within the  
current country and to your home country, which is  
the country where your home network provider is  
located.  
1. Select the call barring option to be deactivated.  
2. Select the type of call to which this option  
applies.  
3. Press the Deactivate soft key.  
All Incoming: calls cannot be received.  
4. Enter your call barring password supplied by  
your service provider.  
Incoming While Abroad: calls cannot be received  
when you are using your phone outside of your  
home service area.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Cancel All: all call barring settings are deactivated;  
calls can be made and received normally.  
You can also deactivate all of the call barring  
settings by selecting the Cancel All option.  
You can specify individual barring options for each  
of the following call types.  
Change Barring Password: you can set and  
change the call barring password obtained from  
your service provider using this option. You must  
enter the current password before you can specify a  
new one.  
• Voice calls only  
• Data calls only  
To set your call barring options:  
Once you have entered a new password, you are  
asked to confirm it by entering it again.  
1. Select the type of call barring by pressing the  
or  
key and then press the Select soft  
key.  
2. Select the type of calls to be barred by pressing  
the or key and then press the Select  
soft key.  
110  
111  
Network Services  
Network Services  
Call Waiting (Menu 7.3)  
Network Selection (Menu 7.4)  
This network service informs you when someone is  
trying to reach you during another call.  
The Network Selection feature enables you to  
automatically or manually select the network used  
when roaming outside of your home area.  
You can specify individual call waiting options for  
each of the following call types:  
Note: You can select a network other than your home  
network only if there is a valid roaming  
agreement between them.  
• Voice calls only  
• Data calls only  
To indicate to automatically or manually select the  
network when roaming:  
To set your call waiting options:  
1. Select the type of calls to which you want to  
apply the call waiting option by pressing the  
1. When Network Selection displays, press the  
Select soft key.  
or  
key and then press the Select soft key.  
2. Press the  
or  
key until the appropriate  
The screen informs you whether call waiting is  
activated or deactivated.  
option highlights and then press the OK soft  
key.  
2. You can activate or deactivate the call waiting  
feature as necessary by using the Activate or  
Deactivate soft key respectively.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, the phone scans for the  
available networks. Go to Step 3.  
To return to the previous screen, press the Exit  
soft key.  
3. Press the  
or  
key until the preferred  
You can also deactivate all of the call waiting  
settings by selecting the Cancel All option.  
network highlights and then press the OK soft  
key.  
You are connected to that network.  
112  
113  
Network Services  
Network Services  
Caller ID (Menu 7.5)  
Activating a Closed User Group  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
If you select the Closed User Group menu, you  
can enter the CUG function. You can now access the  
following options after pressing the Select soft key:  
Note: Some networks do not allow the user to change  
this setting.  
The following options are available:  
Index List: lets you list, add or delete CUG index  
numbers. The list of current CUG indexes appears.  
Add a new CUG index as advised by your service  
provider or delete a selected group.  
Default: the default setting provided by the  
network is used.  
Hide Number: your number does not display on  
the other person’s phone.  
To  
Press the  
scroll through the  
existing CUG  
indexes  
or  
key.  
Send Number: your number is sent each time you  
make a call.  
add a new CUG  
index  
Options soft key, select the  
Add option and enter the  
index.  
Closed User Group (CUG) (Menu 7.6)  
delete a CUG  
index  
Options soft key and select  
the Delete option.  
This network service allows incoming and outgoing  
calls to be restricted to a selected user group. You  
may be a member of up to ten user groups.  
For details on how to create, activate and use a  
closed user group, contact your service provider.  
activate a CUG  
index  
Options soft key and select  
the Activate option.  
Example: A company lends SIM cards to its  
employees and wants to restrict outgoing  
calls to members of the same team.  
114  
115  
Network Services  
Funbox  
The Funbox menu contains several fun options.  
Outside Access: lets you enable or disable calls to  
numbers other than those in the Closed User  
Group. This feature depends on the nature of your  
CUG subscription. Please check with your service  
provider.  
Games (Menu 8.1)  
You can enjoy the games with your phone.  
Default Group: you may set a default CUG with  
your service provider. If you have done so, you can  
enable the Default Group option on your phone.  
When making a call, you are given the option of  
using your default CUG, instead of selecting one  
from the list.  
Scroll to a game, using the  
and  
keys and  
press the Select soft key.  
For each game, the following options are available.  
To select an option, press the corresponding  
number key:  
Deactivate: deactivates the CUG function. This  
menu appears only when the default group is  
enabled or a CUG index is selected.  
New Game: allows you to start a game.  
High Score: shows you the High Score table.  
Key Info: shows you which keys do what within  
the game.  
Continue: allows you to continue the last game  
you played.  
While you are playing a game:  
To  
Press the  
pause or resume the  
game  
C key.  
exit the game  
key.  
At the end of the game, if your score is ranked fifth  
or higher, you may enter a name of up to 10  
characters.  
116  
117  
Funbox  
Funbox  
Navigating the WAP Browser  
WAP Browser (Menu 8.2)  
To  
Press the  
Your phone comes equipped with a WAP (Wireless  
Application Protocol) Browser which makes it  
possible for you to access and navigate the Wireless  
Web.  
scroll through and  
select browser  
items  
or  
key until the  
symbol points to the  
required item, and then  
press the OK soft key to  
confirm the selection.  
Home (Menu 8.2.1)  
select a numbered  
item  
corresponding numeric key.  
Selecting this option connects the phone to the  
network and loads the homepage of the Wireless  
Web service provider. You can also press the  
in Idle Mode.  
key  
return to the  
previous page  
Back soft key or the C key.  
The content of the WAP Browser startup homepage  
depends on your Wireless Web service provider. To  
return to the  
startup homepage  
key and select the Home  
menu option. For further,  
refer to page 120.  
scroll through the screen, use the  
keys.  
and  
Entering Text in the WAP browser  
Note: To access the startup homepage from any other  
screen in the WAP Browser, use the Home  
option. For further details about the WAP  
Browser menus, see page 120.  
When you are prompted to enter text, the current  
text entry mode is indicated on the screen.  
To change  
modes  
press the  
times.  
key one or more  
Exiting the WAP Browser  
To enter a space press the  
key.  
To exit the browser at any time, simply press  
the  
key or press and hold the  
key.  
To edit text  
set the cursor to the right of  
the character(s) to be  
corrected.  
press the C key as required.  
enter the correct  
character(s).  
For further details about each text input mode, see  
page 41.  
118  
119  
Funbox  
Funbox  
Using and Selecting Menu Options  
To  
Press the  
Various menu options are available when you are  
using the WAP Browser to navigate the Wireless  
Web.  
set the current  
page as your  
startup homepage  
Option soft key, select the  
Save to Home option and  
press the Select soft key.  
To access a menu option:  
set a bookmark for Option soft key, select the  
1. Press the  
key.  
the current page  
Save to Bookmark option  
and press the Select soft  
key.  
A menu displays.  
2. Highlight a menu option by using the  
keys.  
and  
cancel your setting Back soft key.  
3. Access an option by pressing the Select soft  
key.  
Edit Home: allows you to change the startup  
homepage manually. Enter the required URL and  
press the OK soft key. For further details about  
entering text, see page 119.  
4. If necessary, select the secondary option using  
the  
and  
keys, and press the Select soft  
key to confirm.  
Note: The menus may vary, depending on your  
Favorite (Menu 8.2.2)  
version of the WAP Browser.  
This menu option allows you to store the URL  
addresses of your favourite Web sites. You can  
access this menu directly by pressing and holding  
The following options are available:  
the  
key while using the WAP Browser.  
Reload: reloads the current page.  
To store a URL address:  
Home: takes you back at any time to the  
homepage of the Wireless Web service provider.  
1. Select an empty location and press the Options  
Go to URL: allows you to manually enter the URL  
address of the required Web page. After entering an  
address, press the OK soft key to go there directly.  
soft key.  
2. Enter the address and press the Enter soft key.  
Show URL: displays the URL address of the site to  
which you are currently connected. It also enables  
you to set the current site as the startup  
homepage.  
For further details about entering text, see  
page 41.  
3. Enter a title for the favourite item and press the  
Enter soft key.  
After saving favourite items, you can use the  
following items by press the Options soft key:  
120  
121  
Funbox  
Funbox  
Goto URL: quickly accesses you to the site.  
Edit: allows you to edit the address.  
Erase: deletes the address.  
Bearer: select the bearer to be used for each type  
of network address accessed; GPRS or Data. The  
remaining options depend on the Bearer setting.  
When the bearer is set to GPRS:  
User Name: enter the User ID required to connect  
to the GPRS network.  
http:// (Menu 8.2.3)  
This menu option allows you to manually enter a  
URL address of the Web site that you wish to  
access. You can access this menu directly by  
Password: enter the password required to connect  
to the GPRS network.  
pressing and holding the  
WAP Browser.  
key while using the  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
For further details about entering text, see page 41.  
When the bearer is set to Data:  
Login Name: enter the PPP server login ID.  
Password: enter the PPP server password.  
Settings (Menu 8.2.4)  
You can set up five proxy servers for the WAP  
Browser. Contact your service provider for details.  
Dial-up Number: enter the PPP server’s dial-up  
number.  
For each server, the following options are available:  
Data Call Type: select a data call type from  
Analogue or ISDN.  
Profile Name: enter a name that you wish to  
assign to the HTTP proxy server.  
Note: The WAP Browser settings may vary, depending  
on the service provider. Contact your service  
provider for further details.  
Homepage URL: enter the address of your startup  
homepage. When the default homepage displays,  
you can delete it using the C key and enter your  
own choice.  
Clear Cache (Menu 8.2.5)  
Security: set the data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-Secure.  
You can clear the information stored in the cache,  
which is the phone’s temporary memory used to  
store the most recently accessed Web pages.  
IP Address: enter the WAP gateway address  
required to connect to the Internet.  
122  
123  
Funbox  
Funbox  
2. Scroll to the MIDlet you want and press the  
Push Message (Menu 8.2.6)  
Launch soft key.  
This menu option allows you to receive and access  
Web messages from the server.  
3. Start the MIDlet using the soft keys.  
The following options are available:  
Using the Menus  
Inbox: allows you to read the messages you  
received from the web server.  
From the Main Screen, press the Menu soft key to  
access the following options:  
Receive: allows you to set whether or not the  
phone receives Web messages from the server.  
Info: displays information about the selected  
MIDlet, such as the file size, application version,  
vendor, and location of the jad file, which is the  
MIDlet description file.  
Delete All: deletes all of the messages.  
Remove: removes the selected MIDlet. When the  
confirmation message appears, press the Remove  
soft key. To cancel your selection, press the Cancel  
soft key.  
Downloads (Menu 8.3)  
You can download MIDlets (Java applications  
running on mobile phones) from various sources  
using the WAP Browser and store them in your  
phone. You can view the list of MIDlets stored on  
the Games & More screen.  
Update: accesses the server and updates the  
selected MIDlet.  
Entering Text  
Note: Java services may be unavailable depending on  
For entering text while using a MIDlet, the following  
input modes are available:  
the service provider.  
Games & More (Menu 8.3.1)  
Upper-case character (A): allows you to enter  
upper-case English characters.  
This menu option allows you to launch a MIDlet and  
access various menu options.  
Lower-case character (a): allows you to enter  
lower-case English characters.  
For further details about how to download MIDlets  
in the WAP Browser, see page 118.  
Note: In the upper/lower-case character mode, you  
can enter symbols by pressing the 1 or 0 key  
Launching a MIDlet  
until the symbol you want displays  
.
Number (1): allows you to enter numbers.  
To launch a MIDlet:  
To change the text input mode, press the  
until the appropriate indicator appears on the soft  
key area of the display.  
key  
1. From the Downloads screen, select the Games  
& More option.  
124  
125  
Funbox  
Solving Problems  
Sounds (Menu 8.3.2)  
Before contacting the after-sales service, perform  
the following simple checks. They may save you the  
time and expense of an unnecessary service call.  
In this menu, you can view the list of sounds  
downloaded from the server. You can set the  
downloaded sounds as the current ring tone or send  
the sounds to other phones.  
When you switch your phone on, the  
following messages may appear  
When the memory is full, a warning message  
displays and the phone rejects additional sounds  
until you erase the obsolete ones.  
Insert SIM Card  
• Check that the SIM card is correctly installed.  
Pictures (Menu 8.3.3)  
Phone Locked Enter Password  
In this menu, you can view the list of pictures  
downloaded from the server. You can set the  
downloaded pictures as the current background  
image or send them to other phones.  
• The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
When the memory is full, a warning message  
displays and the phone rejects additional pictures  
until you erase the obsolete ones.  
Enter PIN  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
DNS Setting (Menu 8.3.4)  
• The PIN Check feature is enabled. Every time the  
phone switched on, the PIN has to be entered. To  
disable this feature, use the PIN Check menu  
option (Menu 5.5.1).  
The DNS (Domain Name Server) address of the  
Java server is preset at the factory, but sometimes  
you may need to change it. In this menu, you can  
determine whether the address is automatically  
updated or not.  
Enter PUK  
Automatic: the server automatically transmits the  
address to the phone if it is changed.  
• The PIN code was entered incorrectly three times  
in succession and the phone is now blocked.  
Enter the PUK supplied by your network operator.  
Manual: you can manually change the address.  
126  
127  
Solving Problems  
Solving Problems  
“No service,” “Network failure” or “Not  
done” displays  
The phone starts beeping and  
“**Warning** Low Battery” flashes on  
the display  
• The network connection was lost. You may be in a  
weak signal area (in a tunnel or surrounded by  
buildings). Move and try again.  
• Your battery is insufficiently charged. Recharge  
the battery.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
You have entered a number but it was  
not dialled  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
• Have you pressed the  
key?  
No number is dialled when you recall a  
Phonebook entry  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
• Check that the number has been stored correctly,  
by using the Phonebook Search feature.  
Your correspondent cannot reach you  
• Re-store the number, if necessary.  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
If the above guidelines do not help you to solve  
the problem, take a note of:  
Your correspondent cannot hear you  
speaking  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
• Have you switched off the microphone?  
Then contact your local dealer or Samsung  
after-sales service.  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
128  
129  
Access Codes  
Access Codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help you  
protect the phone against unauthorised use.  
PIN  
The Personal Identification Number or PIN (4 to  
8 digits) protects your SIM card against  
unauthorised use. It is usually supplied with the  
SIM card.  
When requested for any of the codes explained  
below, enter the appropriate code (displayed as  
asterisks) and press the OK soft key. If you make a  
mistake, press the C key one or more times until  
the incorrect digit is cleared and then continue  
entering the correct code.  
If you enter an incorrect PIN three times in  
succession, the code is disabled and cannot be used  
until you re-enable it by entering the PUK (see  
below).  
The access codes, except for the PUK and PUK2  
codes can be changed using the Security menu  
option (Menu 5.5). See page 91 for further details.  
To  
See  
activate/deactivate the  
PIN Check feature  
page 91  
(Menu 5.5.1).  
Important! Avoid using access codes resembling  
emergency numbers, such as 112, so  
that you do not dial an emergency  
number accidentally.  
change the PIN  
page 92  
(Menu 5.5.2).  
PUK  
Phone Password  
The 8-digit PUK (PIN Unblocking Key) is required to  
change a disabled PIN. The PUK may be supplied  
with the SIM card. If not, or you have lost it,  
contact your service provider.  
The Phone Lock feature uses the phone password to  
protect your phone against unauthorised use. The  
phone password is supplied with the phone and is  
preset to “00000000” at the factory.  
To re-enable your PIN:  
1. Enter the PUK and press the OK soft key.  
To  
See  
2. Enter a new PIN of your choice and press the OK  
activate/deactivate the  
Phone Lock feature  
page 92  
soft key.  
(Menu 5.5.3).  
3. When the Confirm New PIN message displays,  
enter the same code again and press the OK  
soft key.  
change the phone  
password  
page 92  
(Menu 5.5.4).  
If you enter an incorrect PUK ten times in  
succession, the SIM card becomes invalid. Contact  
your service provider for a new card.  
130  
131  
Access Codes  
Access Codes  
PIN2  
Barring Password  
The PIN2 (4 to 8 digits), supplied with some SIM  
cards, is required to access specific functions, such  
as setting the maximum cost of a call. These  
functions are available if supported by your SIM  
card.  
The 4-digit barring password is required when you  
use the Call Barring function. You obtain the  
password from your service provider when you  
subscribe to this function.  
You can change this password using the Call  
Barring menu option (Menu 7.2). See page 111  
for further details.  
If you enter an incorrect PIN2 three times in  
succession, the code is disabled and you cannot  
access the functions until you re-enable it by  
entering the PUK2.  
To change the PIN2, see page 93 (Menu 5.5.7).  
PUK2  
The 8-digit PUK2 (PIN Unblocking Key 2), supplied  
with some SIM cards, is required to change a  
disabled PIN2. If you lose the code, contact your  
service provider.  
To re-enable your PIN2:  
1. Enter the PUK2 and press the OK soft key.  
2. Enter a new PIN2 of your choice and press the  
OK soft key.  
3. When the Confirm PIN2 message displays,  
enter the same code again and press the OK  
soft key.  
If you enter an incorrect PUK2 ten times in  
succession, you will not be able to access the  
functions requiring the PIN2. Contact your service  
provider for a new card.  
132  
133  
Health and Safety Information  
Health and Safety  
Information  
Precautions When Using Batteries  
Exposure to Radio-Frequency Energy  
(SAR Information)  
• Never use any charger or battery that is damaged  
in any way.  
This phone meets Australian Communications  
Authority (ACA) requirements (AS/NZS 2772)  
concerning exposure to radio waves.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured, so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by ACA. These limits  
are part of comprehensive guidelines and establish  
permitted levels of RF energy for the general  
population. The guidelines were developed by  
independent scientific organisations through  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
• Battery charging time depends on the remaining  
battery charge and the type of battery and  
charger used. The battery can be charged and  
discharged hundreds of times, but it will  
gradually wear out. When the operation time  
(talk time and standby time) is noticeably shorter  
than normal, it is time to buy a new battery.  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
*
ACA is 1.6W/kg.  
* The SAR limit for mobile phones used by the public is 1.6  
watts/kilogram (W/kg) averaged over one gram of body  
tissue. The limit incorporates a substantial margin of safety  
to give additional protection for the public and to account  
for any variations in measurements. The SAR values may  
vary depending on the national reporting requirements and  
the network band.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
134  
135  
Health and Safety Information  
Health and Safety Information  
Road Safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, practice good common  
sense and remember the following tips.  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
1. Get to know your wireless phone and its  
features, such as speed dial and redial. If  
available, these features help you to place your  
call without taking your attention off the road.  
2. When available, use a hands-free device. If  
possible, add an extra layer of convenience and  
safety to your wireless phone with one of the  
many hands-free accessories available today.  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
3. Position your wireless phone within easy reach.  
Be able to access your wireless phone without  
removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your  
voice mail answer it for you.  
4. Let the person you are speaking with know you  
are driving; if necessary, suspend the call in  
heavy traffic or hazardous weather conditions.  
Rain, sleet, snow, ice and even heavy traffic can  
be hazardous.  
5. Do not take notes or look up phone numbers  
while driving. Jotting down a To Do list or  
flipping through your phonebook takes your  
attention away from your primary responsibility,  
driving safely.  
136  
137  
Health and Safety Information  
Health and Safety Information  
Operating Environment  
6. Dial sensibly and assess the traffic; if possible,  
place calls when you are not moving or before  
pulling into traffic. Try to plan calls when your  
car will be stationary. If you need to make a call  
while moving, dial only a few numbers, check  
the road and your mirrors, then continue.  
Remember to follow any special regulations in force  
in any area and always switch off your phone  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
7. Do not engage in stressful or emotional  
conversations that may be distracting. Make the  
people with whom you are talking aware that  
you are driving and suspend conversations that  
have the potential to divert your attention from  
the road.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
8. Use your wireless phone to call for help. Dial the  
emergency number in the case of fire, traffic  
accident or medical emergencies. Remember, it  
is a free call on your wireless phone!  
9. Use your wireless phone to help others in  
emergencies. If you see a car accident, crime in  
progress or other serious emergency where lives  
are in danger, call the emergency number, as  
you would want others to do for you.  
Electronic Devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
10.Call roadside assistance or a special non-  
emergency wireless assistance number when  
necessary. If you see a broken-down vehicle  
posing no serious hazard, a broken traffic signal,  
a minor traffic accident where no one appears  
injured, or a vehicle you know to be stolen, call  
roadside assistance or any other special non-  
emergency wireless number.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
recommendations of Wireless Technology Research.  
138  
139  
Health and Safety Information  
Health and Safety Information  
Vehicles  
Persons with pacemakers:  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
• Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
• Should not carry the phone in a breast pocket  
• Should use the ear opposite the pacemaker to  
minimise potential interference  
Posted Facilities  
If you have any reason to suspect that interference  
is taking place, switch off your phone immediately.  
Switch off your phone in any facility where posted  
notices require you to do so.  
Hearing Aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
Potentially Explosive Atmospheres  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
Other Medical Devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch off your phone  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas  
(such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust  
or metal powders, and any other area where you  
would normally be advised to turn off your vehicle  
engine.  
140  
141  
Health and Safety Information  
Health and Safety Information  
Emergency Calls  
Other Important Safety Information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
• Check regularly that all wireless phone  
equipment in your vehicle is mounted and  
operating properly.  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
• Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
• Switch off your phone before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
3. Press the  
key.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not cut off the call until given  
permission to do so.  
142  
143  
Health and Safety Information  
Health and Safety Information  
Care and Maintenance  
• Use only the supplied or an approved  
• Keep the phone and all its parts and accessories  
out of the reach of small children’s.  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
• Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that will corrode  
electronic circuits.  
• If the phone, battery, charger or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove or a radiator.  
The phone may explode when overheated.  
144  
145  
Glossary  
Glossary  
Enhanced Message Service (EMS)  
To help you understand the main technical terms  
and abbreviations used in this booklet and take full  
advantage of the features on your mobile phone,  
here are a few definitions.  
An adaptation of the Short Message Service (SMS)  
that allows users to send and receive ring tones and  
operator logos, as well as combinations of simple  
media to and from EMS-compliant handsets.  
Because EMS is based on SMS, it can use SMS  
centres the same way that SMS does. EMS works  
on all Global System for Mobile communications  
(GSM) networks. EMS senders can use text,  
melodies, pictures, sounds, and animations to  
enhance the expressive power of messages that are  
limited by the display constraints of mobile devices.  
Active Folder  
Ability to answer a call simply by opening the  
phone.  
Call Barring  
Ability to restrict outgoing and incoming calls.  
GPRS (General Packet Radio Service)  
Call Diverting  
New non-voice value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS guaranties continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
Ability to reroute calls to another number.  
Call Holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call Waiting  
GSM (Global System for Mobile  
Communication)  
Ability to inform users that they have an incoming  
call when engaged on another call.  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
Caller Line Identification Services (Caller ID)  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
146  
147  
Glossary  
Java  
Glossary  
PIN (Personal Identification Number)  
Programming language generating applications that  
can run on all hardware platforms, whether small,  
medium or large, without modification. It has been  
promoted for and geared heavily to the Web, both  
for public Web sites and Intranets. When a Java  
program runs from a Web page, it is called a Java  
applet. When it is run on a mobile phone or pager, it  
is called a MIDlet.  
Security code that protects the phone against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
PUK (PIN Unblocking Key)  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
Multi-party Calling  
Ability to establish a conference call involving up to  
five additional parties.  
Roaming  
MMS (Multimedia Message Service)  
Use of your phone when you are outside your home  
area (when travelling for example).  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
users, MMS is similar to Short Message Service  
(SMS)-it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers, thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can also be sent by  
e-mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and later also video clips and presentation  
information.  
SDN (Service Dialling Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support  
and emergency services.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot  
on the back of the phone and is protected by the  
battery.  
Phone Password  
Security code used to unlock the phone when you  
have selected the option to lock it automatically  
each time it switches on.  
148  
149  
Glossary  
SMS (Short Message Service)  
Network service sending and receiving messages to  
and from another subscriber without having to  
speak to the correspondent. The message created  
or received can be displayed, received, edited or  
sent.  
Soft Keys  
Two keys marke  
d
and  
on the phone, the  
purpose of which:  
• varies according to the function that you are  
currently using  
• is indicated on the bottom line of the display just  
above the corresponding key  
Voice Mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice) and  
records a message.  
150  
Index  
ending • 23  
A
holding • 47  
international • 22  
making • 22  
Access codes • 130  
Accessories •  
9
Active folder, set • 96  
Alarm (6.4) • 105  
Alert type (4.3) • 85  
Anykey answer • 96  
Auto light, set • 94  
Auto redial, set • 96  
Autopower alarm • 105  
missed • 26 81  
,
multi-party • 51  
received (3.2) • 81  
records (3) • 81  
rediallingautomatically•  
96  
time (3.5) • 82  
via phonebook • 35  
waiting • 51  
,
112  
B
Card, SIM  
Background image • 89  
Backlight • 15  
Barring  
calls (7.2) • 110  
password • 111  
Battery  
installing • 17  
locking • 93  
,
94  
Care • 144  
CB messages • 71  
Changing  
,
133  
barring password • 111  
password (5.5.4) • 92  
PIN (5.5.2) • 92  
charging • 19  
installing • 18  
low battery indicator •  
20  
precautions • 135  
removing • 17  
PIN2 (5.5.7) • 93  
Characters  
changing mode • 42  
entering • 41  
Closed User Group (7.6) •  
114  
Broadcast (1.9) • 71  
Browser, WAP (8.2) • 118  
Conference call • 51  
Connect tone • 88  
Contrast • 94  
Copying  
C
Calculator (6.5) • 106  
Calendar (6.1) • 98  
Caller groups  
memos • 100  
phonebook numbers •  
34  
editing • 37  
searching • 36  
Caller ID (7.5) • 114  
Calls  
tasks • 103  
Cost of call • 83  
CUG • 114  
answering  
Currency exchange (6.6) •  
107  
a call • 25  
a second call • 51  
barring (7.2) • 110  
cost (3.6) • 83  
dialled (3.3) • 82  
diverting (7.1) • 108  
emergency • 142  
D
Date setting (6.3.2) • 104  
Deleting  
all call records • 82  
all memos • 98  
151  
Index  
Index  
Media items • 68  
Memory status  
message (1.7) • 69  
phonebook • 40  
Memos  
correcting • 22  
erasing • 34  
fixed dial • 93  
own • 90  
pasting phonebook • 34  
searching/dialling • 35  
storing • 31  
all messages • 69  
Groups  
caller • 37  
user • 114  
all objects • 68  
all tasks • 103  
memos • 100  
missed calls • 81  
objects • 68  
phonebook numbers •  
34  
I
copying • 100  
deleting • 100  
editing • 100  
Icons, description • 14  
Inbox, messages  
picture (2.1) • 73  
text (1.1) • 61  
writing • 99  
received messages • 62  
,
O
Menu style • 90  
Menus  
74  
Options, select • 29  
Organiser (6) • 98  
Outbox, messages  
picture (2.2) • 75  
text (1.2) • 63  
sent messages • 63  
,
75  
Internet • 118  
accessing by scroll • 54  
accessing by shortcuts •  
55  
tasks • 103  
Dialled calls (3.3) • 82  
Display  
J
list • 55  
contrast • 94  
external • 16  
icons • 14  
language, change • 91  
layout • 13  
Java services • 124  
Message tone (4.5) • 86  
Messages  
Own number (5.3) • 90  
K
cell broadcast • 71  
greeting • 90  
P
Key tones  
multimedia • 73  
picture (2) • 73  
text (1) • 61  
Password  
Downloads (8.3) • 124  
DTMF tones, send • 49  
muting/sending • 49  
selecting (4.4) • 85  
volume, adjust • 24  
Keys  
barring  
changing • 111  
description • 133  
phone  
voice • 70  
E
Microphone, mute • 48  
MIDlets, launch • 124  
Minute minder • 88  
description • 11  
location • 10  
shortcut • 97  
changing • 92  
description • 130  
Phone  
lock (5.5.3) • 92  
password • 130  
switching on/off • 21  
Phonebook  
Earpiece volume • 24  
Editing  
Missed calls • 26  
,
81  
memos • 100  
MMS, using • 73  
missed calls • 81  
phonebook number • 34  
tasks • 102  
L
Morning call • 105  
Multimedia messages • 73  
Multi-party calls  
dropping • 53  
making • 51  
private conversation •  
52  
Muting  
Language (5.4) • 91  
Last number, redial • 23  
Length of calls • 82  
Letters  
to do list • 101  
copying • 34  
editing • 34  
Emergency calls • 142  
Error tone • 88  
,
88  
erasing • 34  
External display • 16  
changing mode • 42  
entering • 41  
Light  
backlight • 15  
service • 16 95  
Locking  
phone (5.5.3) • 92  
SIM card (5.5.5) • 93  
Low battery indicator • 20  
Lower-case characters,  
enter• 44  
options • 34  
pasting • 34  
F
all sounds • 28  
key tones • 49  
microphone • 48  
searching/dialling • 35  
speed-dialling • 38  
storingnumbers/names•  
31  
,
94  
FDN mode • 93  
,
Fixed Dial Number mode • 93  
Folder tone (4.6) • 87  
Funbox (8) • 117  
Picture messages  
inbox (2.1) • 73  
outbox (2.2) • 75  
settings (2.5) • 78  
writing (2.3) • 76  
PIN  
N
Names  
Functions, select • 29  
entering • 41  
searching/dialling • 35  
storing • 31  
G
Games (8.1) • 117  
Graphic logo • 95  
Greeting message (5.2) • 90  
M
Network selection (7.4) • 113  
Network services (7) • 108  
Numbers  
changing • 92  
checking • 91  
description • 131  
Maintenance • 144  
copying phonebook • 34  
152  
153  
Index  
PIN2  
Text  
changing • 93  
changing mode • 42  
entering • 41  
description • 132  
Power on/off tone (4.7) • 87  
Problems, solve • 127  
PUK • 131  
Text messages  
broadcast (1.9) • 71  
inbox (1.1) • 61  
memory status (1.7) •  
69  
PUK2 • 132  
outbox (1.2) • 63  
settings (1.5) • 67  
templates (1.4) • 66  
writing (1.3) • 64  
R
Received calls (3.2) • 81  
Redialling  
automatically • 96  
last number • 23  
Reset settings (5.9) • 97  
Ring  
tone (4.1) • 84  
type, alert (4.3) • 85  
volume (4.2) • 84  
Roaming • 113  
Time  
call • 82  
format (6.3.4) • 104  
setting (6.3.1) • 104  
world (6.3.3) • 104  
To do list (6.2) • 101  
Tone  
connect • 88  
error • 88  
folder • 87  
S
Safety  
keypad • 85  
message • 86  
power on/off • 87  
ring • 84  
information • 134  
precautions •  
7
Schedule • 98  
Security (5.5) • 91  
Service light • 16 95  
Shortcut (5.8) • 97  
Silent mode • 28  
SIM card  
Travel adapter • 19  
,
U
Upper-case characters, enter  
44  
installing • 17  
locking • 93  
User group • 114  
SIM Lock (5.5.5) • 93  
SMS, using • 50 61  
V
,
Soft keys, using • 29  
Sound settings (4) • 84  
Speed-dialling • 38  
Vibration • 85  
Voice mail (1.8) • 70  
Voice server • 70  
Volume, adjust  
earpeice • 24  
T
keypad tone • 24  
ring • 84  
T9 mode • 43  
Tasks, to do list  
creating • 101  
editing • 101  
Templates, message (1.4) •  
66  
W
Waiting call • 51  
Wallpaper • 89  
,
112  
WAP Browser (8.2) • 118  
World time (6.3.3) • 104  
154  
155  
156  

ZALMAN CNPS9500 AT User Manual
Sprint Nextel Cell Phone NNTN9124A User Manual
Sony DREAM MACHINE ICF C1iP User Manual
Seagate Computer Drive ST3750630AS User Manual
Seagate Cheetah NS SAS ST3400755SS User Manual
Samsung SPH PM A740 User Manual
Samsung SGH T255G User Manual
Proton STICK V2 User Manual
Philips Senseo II Blue US User Manual
Nokia MOBILE PHONES 9352596 User Manual