Samsung SGH V205 User Manual

* Some of the contents in this manual may differ from your phone,

depending on the software installed or your service provider.

TRI BAND

GPRS TELEPHONE

SGH-V205

ELECTRONICS

Printed in Korea

Code No.: GH68-xxxxxA

English. 11/2002. Rev. 1.0

www.samsungmobile.com

Contents

Options During a Call ................................. 49

Camera ...................................................... 79

Putting a Call on Hold......................................... 49

Switching the Microphone Off (Mute).................... 50

Muting/Sending Key Tones.................................. 51

Searching for a Number in the Phonebook............. 51

Using the SMS Service ....................................... 52

Answering a Second Call..................................... 52

Making a Multiparty Call ..................................... 53

Take and Send (Menu 4.1) ................................. 79

New Photo (Menu 4.2) ....................................... 80

My Photo (Menu 4.3) ......................................... 80

Sound Settings........................................... 82

Ring Tone (Menu 5.1) ........................................ 82

Ring Volume (Menu 5.2) ....................................... 82

Alert Type (Menu 5.3)........................................ 83

Keypad Tone (Menu 5.4) .................................... 83

Message Tone (Menu 5.5)................................... 84

Folder Tone (Menu 5.6)....................................... 85

Power on/Off (Menu 5.7) ....................................... 85

Extra Tones (Menu 5.8)...................................... 85

Using the Menus......................................... 55

Accessing Menu Functions by Scrolling ................. 55

Accessing Menu Functions by Using Shortcuts ....... 56

List of Menu Functions........................................ 56

Text Messages ........................................... 61

Phone Settings........................................... 87

Read Messages (Menu 1.1)................................. 61

Write Messages (Menu 1.2) ................................ 63

Templates (Menu 1.3)........................................ 65

Setup (Menu 1.4).............................................. 65

Broadcast (Menu 1.5) ........................................ 67

Voice Mail (Menu 1.6) ........................................ 68

My Contents (Menu 1.7) ....................................... 69

Memory Status (Menu 1.8) ................................. 69

Infrared Activate (Menu 6.1)............................... 87

My Settings (Menu 6.2)...................................... 88

Greeting Message (Menu 6.3) ............................. 89

Own Number (Menu 6.4).................................... 89

Language (Menu 6.5)......................................... 90

Security (Menu 6.6)........................................... 90

Display Settings (Menu 6.7) ................................. 93

Extra Settings (Menu 6.8)................................... 95

Short Cut (Menu 6.9)......................................... 96

Reset Settings (Menu 6.10) ................................ 96

Picture Messages ....................................... 70

Inbox (Menu 2.1) .............................................. 70

Outbox (Menu 2.2) ............................................ 72

Write New (Menu 2.3) .......................................... 73

Delete All (Menu 2.4)......................................... 75

Setup (Menu 2.5).............................................. 75

Organizer................................................... 97

Calendar (Menu 7.1).......................................... 97

To Do List (Menu 7.2)........................................... 99

Time & Date (Menu 7.3).................................... 102

Alarm (Menu 7.4)............................................... 103

Calculator (Menu 7.5)......................................... 104

Currency Exchange (Menu 7.6) .......................... 105

Call Records ............................................... 76

Missed Calls (Menu 3.1) ..................................... 76

Incoming Calls (Menu 3.2).................................. 76

Outgoing Calls (Menu 3.3).................................. 77

Delete All (Menu 3.4)......................................... 77

Call Time (Menu 3.5) ......................................... 77

Network Services..................................... 106

Call Forwarding (Menu 8.1)................................ 106

Call Waiting (Menu 8.2)..................................... 108

Network Selection (Menu 8.3)............................ 109

Caller ID (Menu 8.4)........................................... 110

Band Selection (Menu 8.5).................................. 111

Contents

Funbox..................................................... 112

Games (Menu 9.1) ............................................. 112

T-Zones (Menu 9.2).......................................... 112

Downloads (Menu 9.3)........................................ 112

Solving Problems ..................................... 114

Access Codes ........................................... 117

Phone Password ............................................... 117

PIN................................................................. 118

PUK................................................................ 118

PIN2............................................................... 119

PUK2 .............................................................. 119

Health and Safety Information................. 120

Exposure to Radio Frequency (RF) Signals ........... 120

Precautions When Using Batteries....................... 123

Road Safety..................................................... 125

Operating Environment ..................................... 127

Potentially Explosive Atmospheres ...................... 129

Emergency Calls............................................... 130

Other Important Safety Information.................... 131

Care and Maintenance....................................... 132

Acknowledging Special Precautions and

the FCC and Industry Canada Notice ................... 134

Glossary................................................... 139

Index ....................................................... 143

Important Safety

Precautions

Read these guidelines before using your wireless

phone. Failure to comply with them may be

dangerous or illegal. For more detailed safety

information, see “Health and Safety Information”

on page 120.

Road Safety at All Times

Do not use a hand-held phone while driving; park

the vehicle first.

Switching Off When Refueling

Do not use the phone at a refueling point (service

station) or near fuels or chemicals.

Switching Off in Aircraft

Wireless phones can cause interference. Using them

in aircraft is both illegal and dangerous.

Switching Off in Hospitals

Switch off your phone near medical equipment.

Follow any regulations or rules in force.

Interference

All wireless phones may be subject to interference,

which could affect their performance.

Special Regulations

Meet any special regulations in force in any area

and always switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger (in a hospital for example).

Important Safety Precautions

Unpacking

Radio Frequency Exposure

Your package contains the following items.

The design of this phone complies with FCC (of the

U.S. Government) requirements relating to radio

frequency (RF) exposure. To maintain compliance

with these requirements, use only Samsung-

supplied or approved accessories. Use of non-

approved accessories may violate the

requirements.

Handset

Battery

Travel Adapter

Hand Strap

Sensible Use

Use only in the normal position (held to the ear).

Avoid unnecessary contact with the antenna when

the phone is switched on.

Accessories and Batteries

Use only Samsung-approved accessories and

batteries.

Qualified Service

Only qualified service personnel may install or

repair your phone.

Ear-Microphone

User’s Manual

Holster

In addition, you can obtain the following

accessories for your phone from your local

Samsung dealer:

• Ear-microphone

• Simple hands-free kit

• Standard/slim batteries

• Cigarette lighter adapter

Your Phone

Key

Description

Phone Layout

In menu mode, scroll through the

menu options and Phonebook memory.

The following illustrations show the main elements

of your phone.

In idle mode, allow you to access your

favourite menu options directly; for

more information on shortcuts, see

page 96.

Earpiece

In menu mode, return to the previous

menu level and select the current

menu respectively.

Folder

Display

When entering text, move the cursor

left and right respectively.

In idle mode, allow you to access your

favourite menu options directly; for

more information on shortcuts, see

page 96.

Navigation

keys

Camera key

Soft key (right)

Soft key (left)

WAP Browser

key

Ear-microphone

jack

Dial/menu

confirmation key

Perform the functions indicated by the

text above them (on the bottom line of

the display).

Power on/off /

menu exit key

Volume/menu

browse keys

Alphanumeric

keys

(soft keys)

Cancel/

correction key

In idle mode, quickly accesses the

Camera menu to allow you to use the

camera on your phone.

Microphone

IrDA port

Special

function keys

In idle mode, launches the WAP

(Wireless Application Protocol) Browser

directly.

Antenna

Camera module

Deletes characters from the display.

External display

Service light

In menu mode, returns to the previous

menu level.

Your Phone

Key

Your Phone

Display

Description (continued)

Makes or answers a call.

Display Layout

When held down in idle mode, recalls

the last number dialed or received.

The display comprises three areas.

In menu mode, selects a menu

function or stores information that you

have entered (such as a name) in the

phone or SIM memory.

Icons

Text and

graphic area

Ends a call. Also switches the phone on

and off when held down.

In menu mode, cancels your input and

returns to idle mode.

Ph.Book

Soft keys

When held down in idle mode, accesses

your voice mail.

Area

Description

Enter numbers, letters and some

special characters.

First line

Displays various icons (see

page 14).

Middle lines

Display messages, instructions

and any information that you

enter (number to be dialed, for

example).

Enter special characters.

Perform various functions.

Last line

Shows the functions currently

assigned to the two soft keys.

(on the side of the phone)

During a call, adjust the earpiece

volume.

In idle mode, adjust the key volume.

In menu mode, scroll through the

menu options and Phonebook memory.

Your Phone

Icons

Backlight

The display is illuminated by a backlight. When you

press any key or open the folder, the backlight

illuminates. It turns off if no key is pressed within a

given period of time, depending on the Back Light

menu option (Menu 6.7.2).

Icon Description

Shows the received signal strength. The

greater the number of bars, the better the

signal.

To specify the length of time for which the backlight

is active, set the Back Light menu option (Menu

6.7.2); see page 93 for further details.

Appears when a call is in progress.

Appears when silent mode is active or you

set the Alert Type menu option (Menu

5 .3), so that the phone vibrates when

you receive a call; for further details, see

page 83.

You can also set the phone to use the backlight only

during a specified period of time, via the Auto

Light menu option (Menu 6.7.3); see page 94 for

further details.

Appears when a new text message is

received.

External Display

Your phone has an external display on the cover. It

indicates that you have an incoming call or a

message, and notifies you when you set an alarm at

the specified time.

Appears when a new voice mail message

is received.

Appears when you are entering text to

indicate the current text input mode.

Appears when you set the alarm.

Shows the level of your battery. The more

bars you see, the more power you have

left.

Appears when the IrDA port is active. For

details, see page 87.

Appears when mute mode is active.

Your Phone

Getting Started

Service Light

Installing the SIM Card

The service light is below the external display on

the folder cover. It flashes when services are

available on the phone.

When you subscribe to a cellular network, you are

provided with a plug-in SIM card loaded with your

subscription details, such as your PIN, any optional

services available and many others.

To activate or deactivate use of the service light,

set the Service Light menu option (Menu

6.7.4); see page 94 for further details.

Important! The plug-in SIM card and its contacts

can be easily damaged by scratches

or bending, so be careful when

handling, inserting or removing the

card.

Keep all SIM cards out of the reach of

small children.

1. If necessary, switch off the phone by holding

down the

displayed.

key until the power-off image is

Service light

2. Remove the battery. To do so:

➀ Press down the catch above the battery and

hold it in this position.

➁ Slide the battery and lift it away, as shown.

Getting Started

3. Slide the SIM card into the SIM card holder so

that the holder locks the card in position.

Make sure that the notched corner is top left and

the gold contacts of the card face into the

phone.

5. Slide the battery towards the top of the phone

until it clicks into place. Make sure that the

battery is properly installed before switching on

the power.

Charging a Battery

Your phone is powered by a rechargeable Li-ion

battery. A travel adapter is provided with your

phone. Use only approved batteries and chargers.

Ask your local Samsung dealer for further details.

Note: When you need to remove the SIM card, slide

it, as shown, and take it out of the holder.

The phone can be used while the battery is charging,

but this will cause the phone to charge more slowly.

Note: You must fully charge the battery before using

your phone for the first time. A discharged

battery is fully recharged in approximately

200 minutes.

1. With the battery in position on the phone, plug

the connector of the travel adapter into the

bottom of the phone.

4. Place the battery back, taking care to match the

tabs on the battery with the grooves on the

phone.

Getting Started

2. Plug the adapter into a standard AC wall outlet.

Switching the Phone On/Off

3. When charging is finished, unplug the adapter

from the power outlet and from the phone by

pressing the gray tabs on both sides of the

connector and pulling the connector out.

1. Open the folder.

2. Hold down the

switches on.

key until the phone

3. If the phone asks for a password, enter the

password and press the OK soft key. The phone

password is factory set to “00000000.” For

further details, see page 117.

4. If the phone asks for a PIN, enter the PIN and

press the OK soft key. For further details, see

page 118.

The phone searches for your network and when

it finds the network, the idle screen, illustrated

below, appears on each display. Now, you can

make or receive a call.

Low Battery Indicator

When the battery is weak and only a few minutes of

talk time remain, you will hear a warning tone and a

message will be repeated at regular intervals on the

display:

Service Provider

07:30 AM

Wed Jul 31

07:30

Wed/31 AM

**Warning**

Low Battery

Ph.Book

Note: The display language is factory set to English.

To change the language, use the Language

menu option (Menu 6.5); for further details,

refer to page 90.

Ph.Book

When the battery becomes too weak for the phone

to operate, it switches off automatically.

5. When you wish to switch the phone off, hold

down the

displayed.

key until the power-off image is

Getting Started

Call Functions

Using the Holster

Making a Call

The supplied holster allows you to conveniently

carry your phone with you.

When the idle screen is displayed, enter the area

code and phone number, and press the key.

To attach the phone to the holster:

1. Insert the phone into the slot of the holster and

press the top of the phone down until it locks

into place.

Note: If you have checked the Auto Redial option

in the Extra Settings menu (Menu 6.8),

the number is redialed automatically up to ten

times when the person does not answer the

call or is already on the phone; see page 95 for

further details.

Making an International Call

1. Press and hold down the

The character appears.

key.

2. Enter the country code, area code and phone

number and press the

key.

2. Attach the holster to your belt or clothing where

it will convenient to reach and use.

Correcting the Number

Note: If a hand strap is attached to the phone or

there is any obstacle in the hand strap hole,

the phone may not be firmly inserted.

To clear...

Press the...

the last digit

displayed

key.

To remove the phone from the holster, first press

the catch of the holster down to unlock the phone,

and then take the phone out of the slot.

any other digit

key until the cursor is

in the number immediately to the right of the

digit to be cleared. Press the

key. You can also insert a missing

digit simply by pressing the

appropriate key.

the whole

display

key for more than one

second.

Call Functions

Ending a Call

Making a Call from the Phonebook

When you want to finish your call, briefly press the

key.

You can store frequently dialed phone numbers with

a name in the SIM card or the phone memory, using

the Phonebook. You then simply select the required

name to recall the associated number. For further

details on the Phonebook features, refer to page 34.

Redialing the Last Number

The phone stores the numbers you dialed, received

or missed if the callers are identified; see “Call

Records” on page 76 for further details.

Adjusting the Volume

To recall any of these numbers:

During a call, if you want to adjust the earpiece

volume, use the volume keys on the left side of the

phone.

1. If you have typed any characters on the display,

clear the display by holding down the

for more than one second.

key

Press the

key to increase and the

key to

decrease the volume.

2. Press the

key to display a list of the last

numbers in the order in which the calls were

made.

3. Use the

and

keys to scroll through the

numbers until the required number is

highlighted.

4. To...

Press the...

dial the number

highlighted

key.

edit the number Edit soft key and change

highlighted

the number as required,

referring to “Correcting

the Number” on page 23

for further details.

In idle mode with the folder open, you can adjust the

key volume using these keys.

Call Functions

Answering a Call

Viewing Missed Calls

When somebody calls you, the phone rings and the

following screen appears on each display.

If you are unable to answer a call for any reason,

you can find out who called you, provided that this

service is available, so that you can call the person

back, if necessary.

The number of missed calls is displayed on the idle

screen immediately after a call was missed.

nnnnnn

To view the missed call immediately:

1. If the phone is closed, open the folder.

2. Press the View soft key.

Reject

The number corresponding to the most recent

missed call is displayed, if available.

If the caller can be identified, the caller’s phone

number or name, if stored in your Phonebook, is

displayed.

3. To....

scroll through the

Press the...

1. If necessary, open the folder. Press the

key or

key.

the Accept soft key to answer the incoming call.

missed calls

If the Anykey Answer option in the Extra

Settings menu (Menu 6.8) is checked, you can

press any key to answer a call except for

call the number

displayed

key.

the

page 95).

key and the Reject soft key (see

edit or delete a

missed call number

Select soft key (see

below).

If the Active Folder option in the Extra

Settings menu (Menu 6.8) is checked, you can

answer the call simply by opening the folder (see

page 95).

Editing a Missed Call Number

Note: If the number corresponding to the missed call

is not available, the Edit Number option is

not displayed.

Note: To reject an incoming call, press and hold

the volume keys on the left side of the

phone before opening the folder.

1. Press the Options soft key.

2. End the call by closing the folder or pressing

2. Press the

key to highlight the Edit

the

key.

Number option.

Note: You can answer a call while using the

Phonebook or menu features.

Call Functions

3. Press the Select soft key.

Quickly Switching to Silent mode

4. Change the number as required.

Silent mode is convenient when discretion is

required and you a wish to stop the phone from

making any noise, in a theatre for example.

5. To...

call the number

Press the...

In idle mode, to switch your phone quickly to silent

key.

mode, simply press and hold down the

key until

store the number Save soft key and enter

the name and location

the “Silent Mode” message and vibration icon (

are displayed.

)

required (for further details,

refer to page 34).

In silent mode, your phone changes the sound

settings as follows.

Deleting a Missed Call

Option

New Setting

Vibration

OFF

1. Press the Options soft key.

Alert Type (Menu 5.3)

Keypad Tone (Menu 5.4)

SMS Tone (Menu 5.5.1)

2. If necessary, press the

key to highlight

the Delete option.

Light Only

3. Press the Select soft key.

You can press the

Missed Call feature.

key at any time to exit the

To exit silent mode and reactivate the previous

sound settings, press and hold the key again

until “Exit Silent Mode” appears. The vibration icon

) is no longer displayed.

Note: You can access the Missed Call feature at any

time by selecting the Missed Calls menu

option (Menu 3.1); for further details, see

page 76.

(

Selecting Functions and Options

Selecting Functions

and Options

To view the various functions/options available and

select the one required:

Your phone offers a set of functions that allow you

to customize your phone. These functions are

arranged in menus and sub-menus, accessed via

1. Press the appropriate soft key.

2. To...

select the:

Press the...

the two soft keys marked

and

. Each menu

and sub-menu allows you to view and alter the

settings of a particular function.

Select soft key or

• function displayed

the

key.

The roles of the soft keys vary according to the

current context; the label on the bottom line of the

display just above each key indicates its current

role.

• option highlighted

view the next function

or highlight the next

option in a list

key or

the left side of the

phone.

key on

Example:

move back to the

previous function or

option in a list

key or

the left side of the

phone.

key on

move back up one

level in the structure

key,

key.

soft key or

exit the structure

without changing the

settings

key.

Options

918

In some functions, you may be asked for a

password or PIN. Enter the required code and press

the OK soft key.

Press the left soft

Press the right soft

key to access the

available options.

key to change the

text input mode.

Selecting Functions and Options

4. Scroll through the sub-menus until you reach

Example: Setting the Display

Language

the Language sub-menu, by pressing the

key.

1. When the idle screen is displayed, press the

Phone Settings

Menu soft key to access the menus.

Infrared Activ...

My Settings

Greeting Me...

Service Provider

07:30 AM

Wed Jul 31

Shows the current

setting

English

Own N

Language

Security

6.5

Select

5. To view the languages available, press the

Select soft key or the key.

Ph.Book

The current setting is highlighted.

2. Scroll through the menus until you reach the

Phone Settings menu, by pressing the

key.

Language

English

Current language

Sound Settings

Español

Français

Automatic

Select

6.5.1

Organizer

6. Scroll through the list of languages until the

appropriate one is highlighted, by pressing the

or key.

Select

3. To select the Phone Settings menu, press the

Select soft key or the

key.

7. Press the Select soft key or the

key to

confirm your selection.

Phone Settings

Infrared Activ...

My Settings

Greeting Me...

Own Number

Language

8. Press the

structure.

key twice to exit the menu

If the menu name is too long

for the display, it is scrolled

when highlighted.

Security

Select

6.1

Phonebook

4. Enter a name and press the OK soft key.

You can store phone numbers and their

corresponding names in the memory of your SIM

card. In addition, you can store up to 500 numbers

in the phone memory. The SIM card and phone

memories, although physically separate, are used

as if they were a single entity, called the

Phonebook.

The maximum length of a name depends on

your SIM card. For information on how to enter

characters, see page 43.

The phone now displays the first free location in

the last memory used to save a number and

name. If that memory is full, the first free

location in the other memory is displayed.

Note: If you change phones, any numbers stored

in your SIM card memory will automatically

be available with the new phone, whereas

any numbers stored in the phone memory

must be restored.

Storing a Number with a Name

There are two ways to store a number:

• Using the Save soft key in idle mode

• Using the New Entry option in the Phonebook

5. Press the right soft key, labeled To Card or To

Phone to toggle between the phone and card

memories.

Storing a Number in Idle mode

6. If you do not want to save the number and

name in the suggested location, press the

key to clear the location number and enter your

preferred location by pressing the number keys.

As soon as you start to enter a number, Save

appears above the left soft key to allow you to store

the number in the Phonebook.

1. Key in the number to be stored.

7. Press the OK soft key to store the name and

number.

Note: If you make a mistake while entering a

After storing, the phone displays the Phonebook

entry or name just created.

number, correct it using the

further details, refer to page 23.

key. For

2. When you are sure that it is correct, press the

8. To...

use the entry options

Press the...

Save soft key.

Options soft key.

3. Select an icon to identify the category of number

to be stored. Three categories are available;

return to the idle

screen

key.

(mobile phone number),

(office number) and

(home number). To select the category,

press the or key, followed by the Select soft

key.

Phonebook

Use this option to dial a number similar to one in

the Phonebook, a different extension in the same

office, for example.

Storing a Number Using the Phonebook

1. When the idle screen is displayed, press the

Use the

refer to page 23 for further details. When you are

ready to dial, press the key.

key to change the number as required;

Ph.Book soft key.

2. Scroll to New Entry by pressing the

key and press the Select soft key.

Edit: allows you to edit the Phonebook entry.

3. Select an icon to identify the category of the

number to be stored.

Select One Entry to change one number in the

selected name. If you change the name, the

number is saved separately. Select All Entry to

change the name of the entry.

Note: The E-mail icon (

) is available in this

step. It allows you to save an E-mail

address instead of a phone number.

Erase: allows you to erase the selected name and

number from the Phonebook. You are asked to

confirm that you wish to erase the name and

number by pressing the Yes soft key.

4. Continue the procedure from Step 4 on page 35

to store the number.

Using Phonebook Entry Options

Copy: allows you to copy the selected number to

another location. Use this option to store a number

similar to one already in the memory; once copied,

edit the number and store it in the Phonebook.

While accessing any Phonebook entry, press the

Options soft key to access the options for the

entry.

Caller Group: allows you to assign the entry to a

caller group so that the phone alerts you in a

particular way when the corresponding person calls

you. Select one of the ten groups available.

To...

Press the...

select the

Select soft key or the

highlighted option

key.

To remove an entry from a group, select the No

Group option.

highlight a different

option

key until the

required option is

highlighted.

For more information on how to change caller group

properties, see page 40.

The following options are available:

Add Entry: allows you to add a new number in

a different category (mobile, office, home or

E-mail) to the currently selected name. A

Phonebook entry or name can contain up to four

numbers, one in each category.

Paste: allows you to paste the selected number

into the normal dialing mode.

Phonebook

Searching for a Number by Caller Group

Searching for a Number in the

Phonebook

1. When the idle screen is displayed, press the

Ph.Book soft key.

After storing numbers in the Phonebook, you can

search for them in two ways; by name and by caller

group.

2. Scroll to Group Search by pressing the

key and press the Select soft key. You are

asked to enter a group name.

Searching for a Number by Name

3. Enter the first few letters of the group name that

you wish to find.

1. When the idle screen is displayed, press the

The caller groups are listed, starting with the

first group matching your input. The group is

also highlighted.

Ph.Book soft key.

2. Press the Select soft key when Search is

highlighted. You are asked to enter a name.

4. Scroll to the required group by pressing the

3. Enter the first few letters of the name that you

wish to find.

key and press the View soft key.

The Phonebook entries in the selected caller

group are listed.

The Phonebook entries are listed, starting with

the first entry matching your input. This entry is

also highlighted.

5. To...

Press the...

4. To...

view the highlighted

Press the...

view the

highlighted entry

View soft key.

select a different

entry

key until the

entry

required entry is

highlighted.

select a different

entry

key until the

required entry is

highlighted.

6. Once you have found the required entry, press

the key to dial the number, or press the

look for a name

starting with a

different letter

key labeled with the

required letter.

Options soft key to access the Phonebook

entry options; for further details, see page 36.

5. Once you have found the required entry, press

the key to dial the number, or press the

Options soft key to access the Phonebook

entry options; for further details, see page 36.

Phonebook

Editing a Caller Group

Speed-Dialing

Once you have stored phone numbers in the SIM

card, you can set up to eight speed-dial entries and

then dial them easily whenever you want, simply by

pressing the associated number key.

1. When the idle screen is displayed, press the

Ph.Book soft key.

2. Scroll to Group Edit by pressing the

key and press the Select soft key.

Setting Up Speed-Dial Entries

3. Enter the first few letters of the required group

name or scroll through the group list by pressing

1. When the idle screen is displayed, press the

the

key.

Ph.Book soft key.

4. When the required group is highlighted, press

2. Scroll to Speed Dial by pressing the

the Options soft key.

key and press the Select soft key.

5. Select each option and change the settings, as

required. The following options are available:

3. Select the key,

, to which you wish to

assign the speed-dialing feature, and press the

OK soft key.

•

Call ring tone: allows you to select the ring

tone to be used when you receive a voice call

from a person in the group.

Note: If you have already assigned a number to

the key, the Options soft key replaces the

OK soft key. Go to Step 6.

SMS tone: allows you to select the ring tone

to be used when you receive a text message

from a person in the group.

4. Select the required Phonebook entry from the

list and press the View soft key.

Graphic: allows you to select the graphic icon

to be displayed when you receive a voice call

from a person in the group.

5. Select the required number if the entry has

more than one number, by pressing the

key and press the Select soft key.

Group Name: allows you to assign a name to

the group; for further details on how to enter

characters, see page 43.

6. Once you have assigned a number to the

selected key, four options are available:

6. When you have finished, press the

key.

•

Change: allows you to assign a different

number to the key.

Erase: allows you to clear the setting so that

no number is assigned to the key.

Erase All: allows you to clear the settings for

all keys so that no numbers are assigned to

any of the keys.

Phonebook

Entering Text

•

Number: allows you to view the number

assigned to the key.

When using your phone, you will often need to

enter text. For example, when storing a name in the

Phonebook, creating your personal greeting or

scheduling events in your calendar. You can enter

alphanumeric characters by using your phone’s

keypad.

7. When you have finished, press the

key.

Speed-Dialing from the Phonebook

You are provided with the following text input

modes.

To speed-dial the numbers assigned to keys

, press and hold down the appropriate key.

• T9 mode

Note: Memory location 1 is reserved for your Voice

Mail server number.

This mode allows you to enter words with only

one keystroke per letter. Each key on the keypad

has more than one letter – when you press the

key once, J, K or L may be displayed. The T9

mode automatically compares your keystrokes

with an internal linguistic dictionary to determine

the correct word, thus requiring far fewer

keystrokes than the traditional upper/lower-case

character modes.

Checking the Memory Status

You can check how many names and numbers are

stored in the Phonebook (card and phone

memories) or how many free locations remain.

1. When the idle screen is displayed, press the

• Upper/lower-case character modes

Ph.Book soft key.

These modes allow you to enter letters by

pressing the key labeled with the required letter

once, twice, three or four times until the letter is

displayed.

2. Select the Memory Status option.

3. Press the

key to view the number of

existing and remaining entries in the card and

phone memories.

• Symbol mode

This mode allows you to enter symbols, such as

punctuation marks.

• Number mode

This mode allows you to enter numbers.

Entering Text

Changing the Text Input Mode

Using the T9 Mode

When you are in a field that allows characters to be

entered, you will notice the text input mode

indicator on the display.

The T9 predictive text input mode allows you to key

in any character using single keystrokes. This text

input mode is based on a built-in dictionary.

Text input mode

indicator

1. When you are in the T9 predictive text input

mode, start entering a word by pressing keys

letter.

. Press each key only once for one

Example: to enter Hello in the T9 mode,

press and

The word that you are typing appears on the

display. It may change with each key that you

press.

Options

918

2. Enter the whole word before editing or deleting

the keystrokes.

To select the...

Press the

until...

soft key

3. If the word is correct, start entering the next

word.

T9 mode

is displayed.

See page 45.

Otherwise, press the

repeatedly to display alternate word choices for

the keys that you have pressed.

key

Upper-case character

mode

is displayed.

See page 46.

Example: both Of and Me have the sequence

Lower-case character

mode

is displayed.

. The phone displays the most

See page 46.

commonly used choice first.

Number mode

is displayed.

4. Put a space between each word by pressing the

key.

See page 48.

Symbol mode

is displayed.

See page 48.

• To type words not found in the T9 mode, change

the text input mode to the upper/lower-case

character input mode.

• To enter full stops, hyphens or apostrophes,

press the

key. The T9 mode applies grammar

Entering Text

Refer to the table below for more information about

the characters available.

rules to ensure that the correct punctuation is

used.

Example:

is used twice to display two

punctuation marks:

Characters in the Order Displayed

Key

Lower Case

Upper Case

Space

’

• To change the case in the T9 mode, use the

key.

• You can move the cursor by using the

keys. To delete letters, press the

and hold down the

and

key. Press

key to clear the display.

Using the Upper/Lower-Case

Character Mode

• To insert a space, press the

key.

• You can move the cursor by using the

keys. To delete letters, press the

and

key. Press

Use the

keys to enter your text.

and hold down the

key to clear the display.

1. Press the key labeled with the required letter:

- Once for the first letter

- Twice for the second letter

- And so on

2. Select the other letters in the same way.

Note: The cursor moves to the right when you press

a different key. When entering the same letter

twice or a different letter on the same key, just

wait for a few seconds for the cursor to move

right automatically, and then select the next

letter.

Entering Text

Using the Symbol Mode

The Symbol mode enables you to insert symbols in

a text message.

918

Use the navigation keys to scroll to the desired

symbol and then press OK soft key to insert the

highlighted symbol into your message.

Using the Number Mode

The Number mode enables you to enter numbers in

a text message (a telephone number for example).

Press the keys corresponding to the required digits

before manually switching back to the appropriate

text input mode.

Options During a Call

Your phone provides a number of control functions

that you can use during a call.

Putting a Call on Hold

You can place the current call on hold whenever you

want. You can make another call while you have a call

in progress if this service is supported by the network.

Of these two calls, one is active and the other is on

hold and you can switch between the calls.

To place a call on hold, simply press the Hold soft

key. You can reactivate the call whenever you want,

by pressing the Unhold soft key.

To make a call while you have a call in progress:

1. Key in the phone number that you wish to dial or

look it up in the Phonebook.

2. Press the

key to dial the second call.

The first call is automatically put on hold.

Or alternatively:

1. Put the current call on hold by pressing the

Hold soft key. Or press the Options soft key

and select the New Call option.

2. Make the second call in the normal way.

To switch between the two calls, simply press the

Swap soft key.

The current call is placed on hold and the call on

hold is reactivated so that you can continue

conversing with the other party.

When you have finished, end each call normally by

pressing the

key.

Options During a Call

Switching the Microphone Off (Mute)

Muting/Sending Key Tones

You can temporarily switch your phone’s

microphone off, so that the other party cannot hear

you.

These options allow you to turn the key tones off or

on. If the Mute keys option is selected, your

phone does not transmit the key tones. It allows

you to press keys without hearing annoying key

tones during a call.

Example: You wish to say something to another

person in the room but do not want the

other party to hear you.

Note: To communicate with answering machines or

computerized telephony systems, the Send

tones option must be selected.

To switch the microphone off temporarily:

1. Press the Options soft key.

2. If necessary, press the

key to highlight the

Searching for a Number in the

Phonebook

Mute option.

3. Press the OK soft key.

You can search for a number in the Phonebook

during a call.

The other party can no longer hear you.

To switch the microphone back on:

1. Press the Options soft key.

2. Press the

option.

key to highlight the Phonebook

2. If necessary, press the

key to highlight the

Unmute option.

3. Press the OK soft key.

The Phonebook entries are listed.

4. Enter the name that you wish to find.

The other party can hear you again.

If you enter the first few letters of the name, the

Phonebook entries are listed, starting with the

first entry matching your input. The entry is also

highlighted.

5. To view the highlighted entry, press the View

soft key.

For further details on the Phonebook feature, refer

to page 34.

Options During a Call

Using the SMS Service

Making a Multiparty Call

If you receive an SMS (Short Message Service)

A multiparty call is a network service that allows up

to six people to take part simultaneously in a

multiparty or conference call. For more information,

contact your service provider.

message during a call, the message icon (

flashes on the display. The Messages option

enables you to use this feature.

)

Read Messages: allows you to read the messages

that you have received.

Setting up the Multiparty Call

Write Messages: allows you to write a message.

1. Call the first participant in the normal way.

For further details on the SMS service, refer to

page 61.

2. Call the second participant in the normal way.

The first call is automatically put on hold.

3. To join the first participant to the multiparty call,

press the Options soft key and select the Join

option.

Answering a Second Call

You can answer an incoming call while you have a

call in progress, if this service is supported by the

network and you have set the Call Waiting menu

option (Menu 8.2) to Activate (see page 108).

You will be notified of an incoming call by a call

waiting tone.

4. To add a new person to the multiparty call, call

the person in the normal way, then press the

Options soft key and select the Conference

option.

You can add incoming callers by answering the call

and pressing Options, followed by Conference

To answer a call while you have a call in progress,

proceed as follows.

Repeat as required.

1. Press the

key to answer the incoming call.

Having a Private Conversation With One

Participant

The first call is automatically put on hold.

2. To switch between the two calls, press the

1. Press the Options soft key and choose the

Swap soft key.

Select one option.

To end a call on hold, press the Options soft

key and select the End Held Call option.

The list of call participants appears.

2. Highlight the required person, by pressing

3. To end the current call, press the

key.

the

key, followed by the Select soft

key or the

key.

Options During a Call

Using the Menus

3. Select the Private option.

The phone offers a range of functions that allow you

to tailor the phone to your needs. These functions

are arranged in menus and sub-menus.

Now you can talk privately with that person. The

other participants can continue to converse with

each other.

The menus and sub-menus can be accessed by

scrolling with the navigation keys or by using the

shortcuts.

4. To return to the multiparty call, press the

Options soft key and select Conference

All the multiparty call participants can now hear

each other.

Accessing Menu Functions by Scrolling

Dropping One Participant

1. In idle mode, press the Menu soft key to access

menu mode.

1. Press the Options soft key and choose the

Select one option.

2. Scroll with the

and

keys to reach the

required main menu, Phone Settings for

example. Press the Select soft key or the key

to enter the menu.

The list of call participants appears.

2. Highlight the required person, by pressing

the

key or the

key, followed by the Select soft

key.

3. If the menu contains any sub-menus,

Language for example, you can access them

by scrolling with the

pressing the Select soft key.

and

keys and

3. Select Remove

The call is ended with that participant, but you

can continue to talk with the other participants.

If the menu that you have selected contains

further options, repeat the same procedure.

4. End the multiparty call by closing the phone or

pressing the

key.

4. To...

Press the...

or key or use

scroll through the

menus

the

and keys on the

left side of the phone.

confirm the chosen

setting

Select soft key or the

key.

return to the

previous menu level

soft key or the

key.

exit the menu

without changing

the settings

Using the Menus

1. Text Messages (see page 61)

Accessing Menu Functions by

Using Shortcuts

1.1 Read Messages

1.1.1 Inbox

1.1.2 Outbox

The menu items (menu, sub-menus and options)

are numbered and can be accessed quickly by using

their shortcut number. The shortcut number is

1.1.3 Delete All

1.2 Write Messages

1.3 Templates

1.4 Setup

shown in the bottom right next to the

soft key on

the display. Simply press the Menu soft key and

key in the required number.

1.4.1 Setting 1^*

1.4.2 Setting 2

1.4.3 Setting 3

Note: The numbers assigned to each menu option are

indicated in the list on the next page. They

may not match the menu number on the

phone. It depends on the services supported

by the SIM card.

1.4.4 Common Setting

1.5 Broadcast

1.5.1 Read

1.5.2 Receive

1.5.3 Channel List

1.5.4 Language

1.6 Voice Mail

Example: Accessing the Language option.

1. Press the Menu soft key.

1.6.1 Call Voice Mail

1.6.2 Voice Server Number

1.7 My Contents

2. Press

3. Press

for Phone Settings

1.7.1 My EMS Melody

1.7.2 My EMS Picture

1.7.3 My EMS Animation

for Language

The languages available are displayed directly.

1.8 Memory Status

1.8.1 SIM memory

1.8.2 PHONE memory

1.8.3 CB memory

List of Menu Functions

The following illustration shows the menu structure

available and indicates the:

2. Picture Messages (see page 70)

2.1 Inbox

• number assigned to each option

2.2 Outbox

2.3 Write New

2.4 Delete All

2.5 Setup

• page on which you can find a description of each

feature

Note: If you use a SIM AT card that provides

additional services, the SIM AT menu (0) is

displayed first when you press the Menu soft

key to enter menu mode. For further details,

refer to your SIM card manual.

* Shown only if supported by your SIM card.

Using the Menus

3. Call Records (see page 76)

6. Phone Settings (continued)

3.1 Missed Calls

6.3 Greeting Message

6.4 Own Number

6.5 Language

3.2 Incoming Calls

3.3 Outgoing Calls

3.4 Delete All

6.6 Security

3.4.1 Missed Calls

3.4.2 Incoming Calls

3.4.3 Outgoing Calls

3.5 Call Time

6.6.1 PIN Check

6.6.2 Change PIN

6.6.3 Phone Lock

6.6.4 Change Password

3.5.1 Last Call

6.6.5 FDN Mode^*

3.5.2 Total Outgoing

3.5.3 Total Incoming

3.5.4 Reset Timers

6.6.6 Change PIN2*

6.7 Display Settings

6.7.1 Contrast

6.7.2 Back Light

6.7.3 Auto Light

6.7.4 Service Light

6.7.5 Graphic Logo

4. Camera (see page 79)

4.1 Take and Send

4.2 New Photo

4.3 My Photos

6.8 Extra Settings

6.8.1 Auto Redial

6.8.2 Active Folder

6.8.3 Anykey Answer

5. Sound Settings (see page 82)

6.9 Short Cut

6.10 Reset Settings

5.1 Ring Tone

5.2 Ring Volume

5.3 Alert Type

5.4 Keypad Tone

5.5 Message Tone

5.5.1 SMS Tone

5.5.2 SMS-CB Tone

5.6 Folder Tone

5.7 Power on/Off

5.8 Extra Tones

5.8.1 Error Tone

5.8.2 Minute Minder

5.8.3 Connect Tone

7. Organizer (see page 97)

7.1 Calendar

7.2 To Do List

7.3 Time & Date

7.3.1 Set Time

7.3.2 Set Date

7.3.3 World Time

7.3.4 Time Format

7.4 Alarm

7.5 Calculator

7.6 Currency Exchange

6. Phone Settings (see page 87)

6.1 Infrared Activate

6.2 My Settings

6.2.1 Wallpaper

6.2.2 Menu Style

* Shown only if supported by your SIM card.

Using the Menus

Text Messages

8. Network Services (see page 106)

The SMS (Short Message Service) function is a

network service and may not be supported by your

network. Messages can be sent by text, fax, Email

and paging messaging systems, provided that these

services are supported by your network. To send

text messages by phone, you must obtain the

number of the SMS center from your service

provider.

8.1 Call Forwarding

8.1.1 Forward Always

8.1.2 Busy

8.1.3 No Reply

8.1.4 Unreachable

8.1.5 Cancel All

8.2 Call Waiting

8.2.1 Voice Calls

8.2.2 Data Calls

8.2.3 Cancel All

8.3 Network Selection

8.3.1 Automatic

8.3.2 Manual

When the message icon (

) appears, you have

received new text messages. If the message

memory is full, an error message is displayed and

you cannot receive any new messages. Use the

Delete option in the Read Messages menu

8.4 Caller ID

(Menu 1.1) to delete obsolete messages.

8.4.1 Default

8.4.2 Hide Number

8.4.3 Send Number

8.5 Band Selection

Read Messages (Menu 1.1)

9. Funbox (see page 112)

Two message boxes are available:

9.1 Games

•

Inbox: used to store the messages that you

9.2 T-Zones

9.3 Downloads

9.3.1 Sounds

9.3.1 Pictures

have received.

•

Outbox: used to store the messages that you

have already sent or will send.

Reading a Message

1. Select the required box and press the Select

soft key.

The list of messages in the box is displayed with

the sender or recipient’s phone number or

name, if it is available in your Phonebook.

2. Select the required message and press the

View soft key to view the message contents.

Text Messages

3. To scroll through the message, press the

key.

Write Messages (Menu 1.2)

In this menu, you can write and send a text

message.

While reading a message, you can choose the

following options by pressing the Options soft key.

Note: You can enter up to 918 alphanumeric

characters for your message. If you add media

items to the message, the number of characters

you can enter will be decreased.

Delete: allows you to delete obsolete messages.

Text Reply (inbox only): allows you to reply to the

sender by sending a text message. You can also

change the SMS center number, if required.

Creating a Simple Text Message

Call Back (inbox only): allows you to call the

sender back.

1. Create your message.

Cut Number: allows you to extract a number from

the message text, so that you can call the number

or save it in the Phonebook.

Note: For more information about entering

characters, refer to page 43.

2. When you have completed your message, press

the Options soft key. The following options are

available:

Send: allows you to send a message that you have

received or saved. For further information on how

to send a message, see page 63.

•

Send Only: allows you to send the message.

The message will be deleted after sending.

Edit Message: allows you to edit a message.

•

Save and Send: allows you to save a copy of

the message and then send the message to the

required destination. You can read the message

in your outbox using the Read Messages

option.

Select Objects: allows you to save the media

items, such as sounds or images, from the message

into your phone’s memory. You can then use the

items when writing a message; for details, see

page 64.

•

Save Only: allows you to save the message so

that it can be sent later. You can read the

message in your outbox using the Read

Messages option.

Note: The options available vary, depending on the

message status (new/old, not sent or sent for

example).

• For information about the Text Formatting

If you want to delete all of the messags in the Inbox

or Outbox, use the Delete All menu option (Menu

1.1.3).

Add Objects Add Templates, and

Language options, see page 64.

3. Select Send Only or Save and Send, and

press the Select soft key.

If you want just to save the message, select

Save Only. After saving the message, the

phone returns to the Messages menu.

Text Messages

4. Enter a destination number and press the OK

Templates (Menu 1.3)

soft key. The message is sent.

Using this menu, you can preset up to nine

messages that you use most frequently. Scroll

Creating a Message using the Options

1. Create your message.

through the template list using the

and

keys.

When the required message template is

highlighted, press the Options soft key.

2. Press the Options soft key.

Edit: allows you to write a new message or edit the

selected message.

3. Select one of the following options by using the

and

key.

keys and pressing the Select soft

Note: For further information on how to enter

characters, refer to page 43.

•

Text Formatting: allows you to format the

style of the text. For the Size attribute, the

Send Message: allows you to recall the selected

message. Once you have completed the message,

you can send, save and send, or simply save it. For

details on how to send a message, see page 63.

Normal

Large and Small sizes are

available. For the Underline and

Strikethrough attributes, select On or Off

The attributes can be combined.

Delete: allows you to delete the selected message.

You are asked to confirm the deletion by pressing

the Yes soft key.

•

Add Objects: allows you to add the required

sound, melody, picture or animation to the

message. Select the category of item to be

added; Sound Melody, Picture and

Animation are available. In each category,

you can select the various factory-set items or

choose an item received from other sources,

such as the Internet or other phones.

Setup (Menu 1.4)

Via this menu, you can set up default SMS

information. A setting group is a collection of

settings required to send messages. The number of

setting groups available depends on the capacity of

your SIM card.

•

Add Templates: allows you to apply one of

the preset message templates to the text.

Select one of the five messages predefined via

the Templates menu option (Menu 1.3); for

further details, see page 65.

Setting x (where

is the setting group number):

each group has its own sub-menu.

Language: allows you to change the

language to be used in the T9 input mode.

Select the language to be used.

Service Center: allows you to store or change the

number of your SMS center required when sending

messages. You must obtain this number from your

service provider.

4. Complete the message, and send or save it by

following the procedure from Step 2 on page 63.

Text Messages

Default Type: allows you to set the default message

type (Text, Fax, Email and Paging). The network

can convert the messages into the selected format.

Broadcast (Menu 1.5)

This network service allows you to receive text

messages on various topics, such as the weather or

traffic. Messages are displayed immediately as they

are received, provided that:

Default Validity: allows you to set the length of time

for which your text messages will be stored at the

message center while attempts are made to deliver

them.

• the phone is in idle mode

• the Receive option is set to Enable

Setting Name: allows you to give a name to the

setting group currently being defined.

• the message channel is currently active in the

channel list

Common Setting: The following four options are

available:

The following options are available:

Reply Path: allows the recipient of your SMS

message to send you a reply message via your

message center, if the service is provided by the

network.

Read: lets you view the message. Volatile

displays the messages from the network, but loses

its contents as soon as the phone is switched off.

Scroll through the message using the

and

keys. While reading a message, press the Save

soft key to store the message in the Archive box

for later retrieval.

Delivery Reports: allows you to activate or

deactivate the report function. When this function is

activated, the network informs you whether or not

your message has been delivered.

Receive: allows you to enable or disable the

reception of broadcast messages.

Bearer Selection: allows you to choose between

GSM and GPRS

Channel List: allows you to indicate the channels

from which you wish to receive broadcast

messages. The following options are available:

Wap Push: allows you to select whether or not you

receive Web messages from the server. Select

Never if you do not want to receive any messages,

Always to receive all messages, and SMS-C

Specific to receive messages from a specific SMS

center.

Select: used to enable or disable channels in the list

by marking or unmarking them respectively (a

check mark is displayed in front of each channel

selected).

Add Channel: used to enter the ID and title for a

new channel.

Delete: used to remove a channel from the list.

Edit: used to change the ID and title of an existing

channel.

Text Messages

Language: allows you to select your preferred

language to be used when displaying cell broadcast

messages.

My Contents (Menu 1.7)

After saving any sounds or images received in

messages into your phone memory, using the

Select Objects option (see page 62), you can see

the items in this menu.

Please contact your service provider for more

information.

To delete the items while viewing in this menu,

press the Delete soft key.

Voice Mail (Menu 1.6)

You can forward the items to other people by

including into a message and/or use them for your

ring tone or background them in a image.

This menu provides you with a way of accessing

your voice mailbox (if provided by your network).

The following options are available.

Three categories of items are available:

Call Voice Mail: before using this feature, you

must enter the voice server number obtained from

your service provider (see menu option 1.6.2). You

can then select this option and simply press the OK

soft key to listen to your messages.

•

My EMS Melody

My EMS Picture

My EMS Animation

To quickly connect to the voice server, press and

Memory Status (Menu 1.8)

hold down the

key in idle mode.

Voice Server Number: allows you to change the

voice mail server number, if necessary.

This menu shows how many messages are currently

stored in the SIM, phone and CB memories.

To...

Press the...

enter the server

number

Corresponding numeric

keys.

correct a digit

key.

move the cursor to

the left/right without

clearing the digit

key.

Note: Voice Mail is a network feature. Please contact

your service provider for more information.

Picture Messages

2. To scroll through the message, press the

key.

Multimedia Message Service (MMS) is a messaging

service very similar to Short Message Service

(SMS). It provides automatic and immediate

delivery of personal multimedia messages from

phone to phone or from phone to e-mail.

While viewing a message, press the Options soft

key to use the following options:

Retrieve: shows you the message contents.

In addition to the familiar text content of text

messages, multimedia messages can contain

images, graphics, voice and audio clips. An MMS

message is a multimedia presentation in a single

entry. It is not a text file with attachments.

Delete: deletes the message.

More Information: shows you detailed

information about the message.

Viewing a Received Message in the Inbox

Using the MMS feature, your phone can receive

multimedia messages. You can also send picture

messages, which are short messages that contain

images, such as your photos or graphics you

downloaded from the Internet. This function is

available only if it is supported by your service

provider. Only phones that offer picture message

features can receive and display picture message.

When you access the Inbox menu option (Menu

2.1), the list of multimedia messages you received

displays with the senders’ phone numbers, if they

are available in your Phonebook, or subjects.

1. Select the message and press the Select soft

key to view the message.

2. To scroll through the message, press the

key.

Inbox (Menu 2.1)

While viewing a message, you can choose the

Message options by pressing the Options soft key.

Viewing a Message When You Receive

If you are viewing a new message, the options are

the same as when you view a message as soon as

you receive it. See the previous section.

When a new multimedia message comes in, the

display shows the text notification along with the

sender’s number.

When you are reviewing a message, the following

options are available:

1. Press the View soft key to view the message.

Delete: deletes the message.

The display shows brief information about the

message, such as the sender’s number, the

message size and the subject.

Reply: allows you to reply to the sender by

sending a text or picture message.

Call Back: allows you to call the sender back.

If you want to view the message later in the

Inbox, press the Exit soft key.

Picture Messages

Cut Number: allows you to extract a number from

the message text, so that you can call the number

or save it in the Phonebook.

Write New (Menu 2.3)

This menu allows you to create a new picture

message and then send it to multiple destinations.

Forward: allows you to forward the message to

another person.

Creating and Sending a Picture Message

Save Picture: allows you to save an image from

the message into your phone. Photos are stored in

the My Photo folder (Menu 4.3) and other

images are in the Pictures folder in the

1. Enter the subject of your message and press the

OK soft key.

For further details about entering characters,

see page 43.

Download menu (Menu 9.3

)

Save Sound: allows you to save a sound from the

message into the Sounds folder in the Download

menu (Menu 9.3).

2. Press the Options soft key and add the

message contents using one of the following

options:

•

Add Text: Enter the message text and press

the OK soft key.

Outbox (Menu 2.2)

•

Add My Photo: allows you to add a photo

you took using the camera on your phone.

Select a photo and press the View soft key.

Then, press the Select soft key to add. For

further details about using the camera, see

page 79.

When you access this menu option, the list of the

picture messages you sent displays.

1. Select the required message and press the

Select soft key to view the message contents.

2. To scroll through the message, press the

key.

•

Add Picture: allows you to add a picture

stored in the Pictures folder in the

Downloads menu (Menu 9.3). Choose a

picture and press the Select soft key.

While viewing a message, you can choose the

following options by pressing the Options soft key:

•

Send: allows you to send the message. Use

this option when you finish creating the

message.

Delete: deletes the message.

Cut Number: allows you to extract a number from

the message text, so that you can call the number

or save it in the Phonebook.

Save: saves the message in the Outbox

(Menu 2.2) for later use. Use this option

when you finish creating the message.

Send: allows you to resend the message.

3. When the added content displays, press the

key to highlight Add Here

Edit Message: allows you to change the message

contents, picture or text.

Picture Messages

4. Repeat steps 2 and 3 until you finish creating

your message.

If you want to edit the destinations, select one

and press the Select soft key. You can change

or delete it.

5. If you want to change the added items, press

the

key to highlight one and press the

11.After entering the destinations, press the OK

Options soft key. The following options are

soft key when Send Message highlights.

available:

Your phone sends the message.

•

Edit: allows you to change text or replace the

image with another.

•

Delete: deletes the item from your message.

Send: allows you to send the message.

Save: saves the message in the Outbox

Delete All (Menu 2.4)

You can delete all of the messages in the Inbox or

Outbox.

(Menu 2.2) for later use.

When a confirming message appears, press the

Yes soft key to confirm.

6. When you finish creating the message, select

Send from the options.

7. Choose one of the following options and press

the Select soft key.

Setup (Menu 2.5)

•

Phone Number: allows you to enter the

desired phone number.

You can change the default message settings.

•

E-mail: allows you to enter the e-mail

address of the recipient to send the message

as an e-mail.

To turn a given option on or off, press the Select

soft key to place or remove a check mark on each

option.

•

Phone Book: allows you to recall a phone

number from your Phonebook.

The following options are available:

Hide ID: When this option is checked, your phone

number is not displayed on the recipient’s phone.

8. Enter a number or an address, or select a

number in the Phonebook. When the correct

number or address is displayed, press the OK

soft key.

Delivery Report: When this option is checked,

the network informs you whether or not your

message has been delivered.

9. If you want to send the message to multiple

destinations, select Add Destination and

press the Select soft key.

Read Reply: When this option is checked, your

phone sends a request for a reply along with your

message to the recipient.

10.Repeat steps 7 to 9. You can enter up to 10

destinations.

Call Records

In this menu, you can view the:

Outgoing Calls (Menu 3.3)

This option lets you view the last 20 numbers

dialed.

• missed, incoming or outgoing calls

• length of time of the call you made or received

• cost of your calls

The number and name are displayed, together with

the date and time when the call was made. By

pressing the Options soft key, you can:

Note: You can access all of the numbers in the three

types of call records by pressing the

idle mode.

key in

• delete the number

• edit the number and save it in the Phonebook

• make a call to the number

Missed Calls (Menu 3.1)

This option lets you view the last 20 unanswered

calls.

Delete All (Menu 3.4)

The number and name, if available, are displayed,

together with the date and time when the call was

received. By pressing the Options soft key, you

can:

You can delete all of the numbers stored in each call

record.

When a confirming message appears, press the

Yes soft key to confirm.

• delete the call from the list

• edit the number, if available, and save it in the

Phonebook

Call Time (Menu 3.5)

• make a call to the number

This option lets you view the timers for calls made

and received.

Incoming Calls (Menu 3.2)

Note: The actual time invoiced for calls by your

service provider may vary, depending on

network features, such as rounding-off for

billing purposes.

This option lets you view the last 20 phone calls

answered.

The number and name, if available, are displayed,

together with the date and time when the call was

received. By pressing the Options soft key, you

can:

The following timers are available:

Last Call: the length of the last call.

Total Outgoing: the total length of all calls made

since the timer was last reset.

• delete the call from the list

• edit the number, if available, and save it in the

Phonebook

• make a call to the number

Call Records

Camera

Total Incoming: the total length of all calls

received since the timer was last reset.

Using the camera module built in your phone, you

can take pictures of people or events while on the

move. Additionally, you can send photos to other

people in a picture message or as an e-mail

Reset Timers: the option used to reset the call

timers; you must first enter the phone password

(see page 117) and then press the OK soft key.

attachment. The camera produces JPEG pictures.

Take and Send (Menu 4.1)

This menu allows you to take a picture to send the

photo as a picture message to other destinations.

Taking a Picture to Send a Message

1. Accessing this menu turns on the camera at the

top left of the phone.

You can see the picture to be captured on the

display.

2. Adjust the picture by rotating the camera

module.

Use the and keys to adjust the brightness of

the picture.

The

and

keys allows you to flip the picture

vertically.

Camera

3. Press the Take soft key to take a picture.

Press the Options soft key to use the following

options:

If you want to have the delay time of 10

seconds, press the After 10s soft key.

Send: allows you to send the photo as a picture

message. For further details, see page 73.

4. Press the Save soft key to save the photo.

Wallpaper: allows you to set the photo to be

displayed on the idle screen as a background

image.

5. Enter a name for your photo and press the OK

soft key.

For further details about entering characters,

see page 43.

Delete: deletes the photo.

Delete All: deletes all of the photos saved in your

6. Follow the procedures on page 73 to send the

photo as a picture message.

phone.

Rename: allows you to change the name of the

photo.

New Photo (Menu 4.2)

In this menu, you can take a picture and save it.

Accessing this menu turns on the camera at the top

left of the phone.

Follow steps 2 to 5 in “Taking a Picture to Send a

Message” on page 79.

My Photo (Menu 4.3)

This menu allows you to review your photos.

When you access this menu, the latest photo is

displayed. Press the or

the photos.

key to scroll through

Pressing the Multi soft key shows the photos as

thumbnail images on one screen. In thumbnail view

mode, use the navigation keys to scroll through the

photos. To go back to normal view mode, press the

View soft key.

Sound Settings

You can use the Sound Settings feature to

customize various settings, such as the:

Alert Type (Menu 5.3)

This option allows you to specify how you are to be

informed of any incoming calls.

• ring melody, volume and type

• sounds made when you press a key, make an

error or receive a message

The following options are available:

Light only: only the backlight is switched on; the

phone neither rings nor vibrates.

Ring Tone (Menu 5.1)

Melody: the phone rings using the ring melody

selected via the Ring Tone menu option

(

Menu 5.1); see page 82.

This option allows you to select the required ring

melody.

Vibration: the phone vibrates but does not ring.

You can choose between many different melodies.

Each time you select a melody, it is played for a few

seconds. If you have downloaded any sounds from

the Internet or EasyGPRS program or received any

ring tone messages, you can view the list in this

menu.

Vibra+Melody: the phone first vibrates three

times and then starts ringing.

Keypad Tone (Menu 5.4)

This option allows you to select the tone that the

keypad generates when you press a key.

Ring Volume (Menu 5.2)

Select one sound type from Cool Piano, Tone

and Beep. Selecting OFF means that the keys do

not make any sound.

This option allows you to adjust the ring volume to

one of five levels.

Use the

and

keys or the

and

keys on

the left side of the phone.

Sound Settings

Message Tone (Menu 5.5)

Folder Tone (Menu 5.6)

This option allows you to select how the phone

informs you that a new message has been received.

This option allows you to turn on or off the sound

that the phone generates when you open the folder.

You can choose from Off

turn off the sound, select Off

Future and Crystal. To

SMS Tone

This option allows you to select how the phone

informs you that a new SMS message has been

received.

Power on/Off (Menu 5.7)

The following options are available:

This option allows you to turn on or off the sound

that the phone generates when it is switched on

and off.

OFF: the phone does not use the SMS tone.

Light Only: the service light on the folder cover

flashes.

You can choose from Off

Classical and Cheerful.

To turn off the sound, select Off

Vibration: the phone vibrates.

Single Beep: the phone beeps once.

Extra Tones (Menu 5.8)

SMS Tone1~10: the phone uses an SMS tone.

You are provided with ten SMS tones.

You can customize various other tones used by the

phone.

SMS-CB Tone

To turn a given

tone...

Press the...

This option allows you to select how the phone

informs you that a new cell broadcast (CB)

message has been received.

ON soft key.

A check mark is displayed in

front of the option.

The following options are available:

off

OFF soft key.

OFF: the phone does not use the CB tone.

The check mark is no longer

displayed.

Light Only: the service light on the folder cover

flashes.

Vibration: the phone vibrates.

The following options are available:

Single Beep: the phone beeps once.

Error Tone: sets whether the phone informs you

that you have made a mistake or not.

SMS-CB Tone1~10: the phone uses a CB tone.

You are provided with ten CB tones.

Sound Settings

Phone Settings

Many different features of your phone can be

customized to suit your preferences. All of these

features are accessed via the Phone Settings

menu.

Minute Minder: sets whether the phone must

beep every minute during an outgoing call to keep

you informed of the length of your call.

Connect Tone: sets your phone to beep when the

person you are calling answers the phone.

Infrared Activate (Menu 6.1)

This feature allows you to send or receive data/fax

through the infrared port. To use an infrared

connection, you must:

• configure and activate an IrDA-compliant infrared

port on your PC

• activate the infrared feature on the phone; the

IrDA icon ( ) appears on the top line of the

display

• align the IrDA port on the phone with the IrDA

port on your computer

IrDA port

The connection is ready for data transmission.

If there is no communication between your phone

and the IrDA-compliant device within 30 seconds of

activating the feature, it is automatically

deactivated.

Note: For the best performance, it is highly

recommended that you use the optional data

link cable.

Phone Settings

My Settings (Menu 6.2)

Greeting Message (Menu 6.3)

You can change the background image and the

color of the components in the display according to

your preference.

This option allows you to set a greeting message to

be displayed briefly when the phone is switched on.

When you select this menu, the current message is

displayed.

Wallpaper

To...

Press the...

key and hold it down

This option allows you to change the background

image (wallpaper) to be displayed in idle mode.

clear the existing

message

until the message is cleared.

To change the background image:

enter a new

message

appropriate alphanumeric

keys.

1. Scroll through the list by pressing the

key.

change the text

input mode

soft key.

You have various preset images available. If you

set a photo as your wallpaper in the My Photo

menu option (Menu 4.3), you can see it by the

name of My icon.icn.

For further details on how to enter characters, refer

to page 43.

2. Press the Select soft key when the required

image is highlighted.

Own Number (Menu 6.4)

The selected image is displayed.

This feature allows you to:

3. After viewing the image, press the Select soft

• Assign a name to your own phone number

registered on your SIM card

key to display it on the idle screen.

• Edit the name and number

Menu Style

This function is a memory aid, which you can use to

check your own phone number if you need to do.

This option allows you to select the menu display

style. You can choose between Film Style and

Any changes made here do not in any way affect

the actual subscriber number on your SIM card.

Page Style

Phone Settings

Change PIN

Language (Menu 6.5)

This feature allows you to change your current PIN

to a new one, provided that the PIN Check feature

is enabled. You must enter the current PIN before

you can specify a new one.

You can select a display language. When the

language option is set to Automatic, the language

is automatically selected according to the language

of the SIM card used.

Once you have entered a new PIN, you are asked to

confirm it by entering it again.

Security (Menu 6.6)

Phone Lock

The Security feature enables you to restrict the use

of your phone to:

When the Phone Lock feature is enabled, the phone

is locked and you must enter the 8-digit phone

password each time the phone is switched on.

• the people of your choice

• the types of calls of your choice

The password is factory set to “00000000.” To

change the phone password, refer to the Change

Password menu option (Menu 6.6.4) below.

Various codes and passwords are used to protect

the features of your phone. They are described in

the following sections (see also pages 117-119).

Once the correct password has been entered, you

can use the phone until you switch it off.

PIN Check

The following options are available:

When the PIN Check feature is enabled, you must

enter your PIN each time you switch the phone on.

Consequently, any person who does not have your

PIN cannot use your phone without your approval.

Disable: you are not asked to enter the phone

password when you switch the phone on.

Enable: you are required to enter the phone

password when you switch the phone on.

Note: Before disabling the PIN Check feature, you

must enter your PIN.

Change Password

To change your PIN, refer to the Change PIN

menu option (Menu 6.6.2).

The Change Password feature allows you to change

your current phone password to a new one. You

must enter the current password before you can

specify a new one.

The following options are available:

Disable: the phone connects directly to the

network when you switch it on.

The password is factory set to “00000000.” Once

you have entered a new password, you are asked to

confirm it by entering it again.

Enable: you must enter the PIN each time the

phone is switched on.

Phone Settings

FDN Mode

Display Settings (Menu 6.7)

The FDN (Fixed Dial Number) mode, if supported by

your SIM card, allows you to restrict your outgoing

calls to a limited set of phone numbers.

Contrast

This option allows you to adjust the contrast of the

display screens to make them lighter or darker.

The following options are available:

Disable: you can phone any number.

To adjust the display contrast:

Enable: you can only call phone numbers stored in

the Phonebook. You must enter your PIN2.

1. Select the required display, Main LCD or Front

LCD, and press the Select soft key.

Note: Not all SIM cards have a PIN2. If your SIM card

2. Adjust the contrast using the

and

keys or

does not, this menu option is not displayed.

the and keys on the left side of the phone.

To change your PIN2, refer to the Change PIN2

menu option (Menu 6.6.6) below.

3. When you are satisfied, press the OK soft key to

save the selection.

Change PIN2

Back Light

The Change PIN2 feature allows you to change your

current PIN2 to a new one. You must enter the

current PIN2 before you can specify a new one.

You can select whether or not the phone uses the

backlight. A marginal increase in standby/talk time

can be achieved by turning the backlight off.

Once you have entered a new PIN2, you are asked

to confirm it by entering it again.

The following options are available:

OFF: the backlight is not used.

Note: Not all SIM cards have a PIN2. If your SIM card

does not, this menu option is not displayed.

Short: the backlight comes on when you press a

key or receive a call and switches off 10 seconds

after the last key is pressed.

Long: the backlight comes on when you press a

key or receive a call and switches off 20 seconds

after the last key is pressed.

Phone Settings

Auto Light

Extra Settings (Menu 6.8)

Using this feature, you can specify the time for

which the backlight is to be used. This feature helps

conserve your battery power.

You can turn the automatic redialing or answering

features on or off.

To turn a

feature...

Press the...

The following options are available:

Disable: the backlight is used according to the

setting in the Back Light menu option

ON soft key.

A check mark is displayed in

front of the option.

(

Menu 6.7.2); see page 93.

Enable: the backlight is used only during the

specified period of time. Set the required length of

time in hours and minutes, using the appropriate

number keys.

off

OFF soft key.

The check mark is no longer

displayed.

Service Light

The following options are available:

Auto Redial: when this option is checked, the

phone makes up to ten attempts to redial a phone

number after an unsuccessful call.

This option allows you to select whether or not the

service light on the folder cover is used or in which

color it flashes.

Note: The interval between two call attempts varies.

Select the required color from the seven color

settings available. When the phone is ready for use,

the service light will flash in the appropriate color.

Active Folder: when this option is checked, you

can simply open the folder to answer a call.

If you do not wish to use the service light,

When it is unchecked, you must open the folder and

press a key, depending on the setting of the

Anykey Answer option (see below).

select Off

Graphic Logo

Anykey Answer: when this option is checked,

you can answer an incoming call by pressing any

This option allows you to display your operator’s

logo instead of its name.

key, except the

key,

key and the Reject

soft key. To reject the call, press the

the Reject soft key.

key or

On: the operator logo stored in your phone is

displayed in idle mode; if no logo has been stored,

the operator name is displayed.

When this option is unchecked, you can only press

the key or Accept soft key.

Off: the operator name is displayed in idle mode.

Phone Settings

Short Cut (Menu 6.9)

The navigation keys can be used as shortcut keys.

When held down in idle mode, they allow you to

access specific menu options directly.

To assign a shortcut to a key:

1. Select the key to be used as a shortcut key by

pressing the

key, followed by the

Select soft key.

•

Key up

(

)

(

Key down

)

•

Key right ( )

Key left ( )

2. Select the menu option to be assigned to the

key by pressing the or key.

Note: To deactivate a shortcut key, select the

None option.

3. Press the Select soft key to save the selection.

Reset Settings (Menu 6.10)

You can easily reset your phone to its default

configuration. To do so:

1. Select the Reset Settings menu option.

2. Enter the 8-digit phone password and press the

OK soft key.

Note: The password is preset to “00000000.” To

change this password, refer to page 91.

Organizer

The Organizer feature enables you to:

• view the calendar and organize your schedule

• define a list of things to do

• set the current date and time

• set the alarm so that the phone rings at a specific

time (to remind you of an appointment for

example)

• use the phone as a calculator for basic

mathematical equations or currency exchange

operations

Calendar (Menu 7.1)

With the Calendar feature, you can:

• consult the calendar

• write memos to keep track of your schedule and

trigger an alarm, if necessary

Consulting the Calendar

When you select the Calendar menu option

(Menu 7.1), the calendar is displayed. The

following options are available when you press the

Options soft key.

Search all: displays all memos set, regardless of

the day and starting with the oldest. To scroll

through the memos, press the

key.

Delete all: allows you to delete all memos. You

are asked to confirm your action.

Go to date: allows you to jump to a specific date.

Exit: exits the Calendar feature and returns to the

idle mode.

Organizer

Once you have finished editing the memo, press the

OK soft key. The following options are then

available when you press the Options soft key.

Writing a Memo

To write or edit a memo on a specific date:

1. Select the required date in the calendar, using

the navigation keys.

Alarm: allows you to set the alarm to ring on the

chosen day.

Note: To skip to the previous or next month, press

the volume keys on the left side of the

phone.

Erase: allows you to delete the memo.

Copy to: allows you to copy the memo to another

date and/or time.

2. Press the Select soft key.

Move to: allows you to change the date and/or

time of the memo.

An empty memo screen is displayed to allow you

to enter your memo.

3. Enter your memo and then press the OK soft

To Do List (Menu 7.2)

key.

This feature allows you to:

Note: For further details on how to enter

characters, refer to page 43.

• enter up a list of tasks to be done

• assign a priority and deadline to each task

• sort the tasks by priority and status mark

You are asked if you wish to set an alarm.

4. If you want the alarm to ring on the chosen day,

press the Yes soft key.

Creating the To Do List

1. Press the New soft key.

2. Enter the first task.

Otherwise, press the No soft key.

5. If you pressed the Yes soft key, set the time for

the alarm and press the OK soft key.

The color of the date is changed to green to

indicate that a memo exists.

Note: You can enter up to 40 characters. For

further details on how to enter characters,

see page 43.

Editing a Memo

3. Press the OK soft key.

If you select a day for which a memo already exists,

you can press the Edit soft key to edit the memo

displayed.

4. Select high, normal or low priority using the

key and press the Select soft key.

5. Enter your deadline.

Note: For further details about how to enter

characters, refer to page 43.

If you do not want to set a deadline, press the

Skip soft key.

Organizer

6. Press the OK soft key.

To...

Then...

copy a task

• highlight the task.

Editing the To Do List

• press the Options soft key.

• select the Copy option.

• change the text, priority

and deadline for the task as

required.

If tasks are already defined in the To Do List when

you select the To Do List menu option

(Menu 7.2), the current contents are displayed

with a status mark and priority (three stars for

high, two for normal and one for low).

copy a task to the

calendar

• highlight the task.

The following options are available:

• press the Options soft key.

• select the Copy to

calendar option.

To...

Then...

• change the text and

deadline for the task and

set the alarm as required.

view the details

for a specific task

• highlight the task.

• press the View soft key.

change the status

of a specific task

• highlight the task.

delete a task

• highlight the task.

• press the Options soft key.

• select the Delete option.

• press the Options soft key.

• select the Mark option.

• select the appropriate

status (Done or Undo).

delete all tasks

• press the Options soft key.

• select the Delete all

option.

create a new

task

• press the Options soft key.

• select the New option.

• enter the text, priority and

deadline for the task.

• confirm the deletion by

pressing OK

exit the To Do list

• press the Options soft key.

• select the Exit option.

edit an existing

task

• highlight the task.

• press the Options soft key.

• select the Edit option.

• change the text, priority

and deadline for the task.

sort the existing

• press the Options soft key.

tasks by priority or • select the Sort option.

status • select the sort criterion

High Low Done or

Undo).

(

100

101

Organizer

Time & Date (Menu 7.3)

Alarm (Menu 7.4)

This option allows you to change the current time

and date displayed. You can also check the current

time for Greenwich Mean Time (GMT) and 21 major

cities around the world.

This feature allows you to:

• set the alarm to ring at a specific time

• set the phone to switch on automatically and ring

the alarm even if the phone is switched off

The following options are available:

(Autopower menu option set to Enable

)

Set Time: allows you to enter the current time.

You can choose the time format via the Time

Format menu option (Menu 7.3.4).

The following options are available:

Once Alarm: the alarm rings only once and is

then deactivated.

Note: Before setting the time, you must specify your

Daily Alarm: the alarm rings every day at the

same time.

time zone, in the World Time menu option

(Menu 7.3.3).

Morning Call: the alarm rings to wake you up in

the morning.

Set Date: allows you to enter the day, month and

year.

To set the alarm:

World Time: allows you to check the current time

for Greenwich Mean Time (GMT) and 21 major cities

1. Choose the type of alarm to be set.

around the world, using the and

keys.

2. Enter the required time and day of the week, if

applicable.

The screen shows the:

• city name

3. Press the OK soft key.

• current date and time

4. If you select Morning Call in Step 1, select the

• time difference between the selected city and

your city if you have set the local time (see below

for further details)

repeat option; Monday to Friday or Monday

to Saturday

Remove Alarm: deactivates all alarm settings.

To select your time zone:

Autopower: if this option is set to Enable, the

alarm will ring at the specified time, even when the

phone is switched off.

1. Select the city corresponding to your time zone

by pressing the or

key one or more times.

The local date and time are displayed.

If the menu option is set to Disable and the phone

is switched off at the specified time, the alarm will

not ring.

2. Press the Set soft key.

Time Format: allows you to change the time

format to 24 Hours or 12 Hours

102

103

Organizer

To stop the alarm when it rings, open the folder and

press the Exit soft key.

Currency Exchange (Menu 7.6)

Using this menu option, you can make currency

conversions.

When setting or viewing an alarm, the following

options are available when you press the Options

soft key:

1. Enter the current exchange rate of your source

currency and press the OK soft key.

Remove Alarm: deactivates the current alarm.

You can insert a decimal point by pressing

Alarm Sound Set: allows you to select the alarm

melody.

the

key.

2. Enter the amount for which you wish to conduct

the currency conversion and press the OK soft

key.

Calculator (Menu 7.5)

The exchange rate amount you entered and

equivalent value are displayed.

With this feature, you can use the phone as a

calculator. The calculator provides the basic

arithmetic functions: addition, subtraction,

multiplication and division.

3. Press the Exit soft key to exit the currency

convertor.

Using the Calculator

1. Enter the first number using the numeric keys.

2. Press the right soft key until the required

arithmetic symbol appears:

(add),

(subtract), (multiply), (divide).

3. Enter the second number.

4. Repeat Steps 1 to 3 as many times as required.

Notes

• To erase any mistakes and clear the display, press

the key.

• To include a decimal point or a bracket, press the left

soft key until the required symbol is displayed.

5. To calculate the result, press the

key.

104

105

Network Services

These menu functions are network services. Please

contact your service provider to check their

availability and subscribe to them, if you wish.

To set your call forwarding options:

4. Select the type of call forwarding required by

pressing the

key, and then press the

Select soft key.

5. Select the type of calls to be forwarded by

Call Forwarding (Menu 8.1)

pressing the

key, and then press the

Select soft key.

This network service enables incoming calls to be

rerouted to the number that you specify.

The current status is displayed. If the option has

already been set, the number to which the calls

are forwarded is displayed.

Example: You may wish to forward your business

calls to a colleague while you are on

holiday.

3. To...

Press the...

Call forwarding can be set up in the following ways:

activate call

forwarding

Activate soft key.

Forward Always: all calls are forwarded.

Go to Step 4.

Busy: calls are forwarded if you are already

making another call.

change the call

number

Change soft key.

Go to Step 4.

No Reply: calls are forwarded if you do not answer

the phone.

deactivate call

forwarding

Remove soft key.

Unreachable: calls are forwarded if you are not in

an area covered by your service provider.

4. Enter the number to which the calls are to be

forwarded and press OK

To enter an international code, press the

key until the sign is displayed.

Cancel All: all call forwarding options are

canceled.

You can specify individual forwarding options for

each of the following call types:

The phone sends your settings to the network

and the network’s acknowledgement is

displayed.

• Voice calls only

• Data calls only

You can deactivate all call forwarding settings by

selecting the Cancel All option.

Example: You can forward voice calls to your

colleague if you are already using the

phone.

106

107

Network Services

Call Waiting (Menu 8.2)

Network Selection (Menu 8.3)

This network service enables you to be informed

when someone is trying to reach you during another

call.

The Network Selection feature enables you to

indicate whether the network used when roaming

(outside your home area) is selected automatically

or manually.

You can specify individual call waiting options for

each of the following call types:

Note: You can select a network other than your home

network only if it has a valid roaming

• Voice calls only

• Data calls only

agreement with your home network.

To indicate whether the network is to be selected

automatically or manually when roaming:

To set your call waiting options:

1. Select the type of calls to which the call waiting

1. When Network Selection is displayed, press

option is to be applied by pressing the

the Select soft key.

key, and then press the Select soft key.

2. Press the

key until the appropriate

The screen informs you whether call waiting is

activated or deactivated.

option is highlighted and then press the OK soft

key.

2. You can activate or deactivate the call waiting

feature as necessary by using the Activate or

Deactivate soft key respectively.

If you select Automatic, you are connected to

the first available network when roaming.

If you select Manual, the phone scans for the

available networks. Go to Step 3.

To return to the previous screen, press the Exit

soft key.

3. Press the

key until the preferred

You can also deactivate all call waiting settings by

selecting the Cancel All option.

network is highlighted and then press the OK

soft key.

You are connected to that network.

108

109

Network Services

Caller ID (Menu 8.4)

Band Selection (Menu 8.5)

You can prevent your phone number from being

displayed on the phone of the person being called.

For the phone to make and receive phone calls, it

must register with one of the available networks.

Your phone can handle any of the following types of

network:

Note: Some networks do not allow the user to change

this setting.

• Combined GSM 900/1800

• GSM 1900

The following options are available:

Default: the default setting provided by the

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you must remember to change to an

appropriate band. Proceed as follows.

network is used.

Hide Number: your number is not displayed on

the other person’s phone.

Send Number: your number is sent each time you

make a call.

1. When Band Selection is displayed, press the

Select soft key.

2. Press the

key until the appropriate

option, GSM 900/1800 or GSM 1900, is

highlighted and press the OK soft key.

When you select a new band, your phone displays a

confirmation message and then automatically

searches for all the available networks. Your phone

then registers with a preferred network within the

selected band.

110

111

Funbox

The Funbox menu contains several fun options.

Pictures

In this menu, you can view the list of pictures

downloaded from the server. You can set the

downloaded pictures as the current background

image, but cannot send them to other phones.

Games (Menu 9.1)

When the memory is full, a warning message is

displayed and the phone rejects additional pictures

until you erase obsolete ones.

You can enjoy three games with your phone.

Scroll to the required game, using the

and

keys and press the Select soft key. For further

details on the game, refer to the on-screen help.

T-Zones (Menu 9.2)

Your phone is equipped with a WAP (Wireless

Application Protocol) Browser to allow you to access

and navigate the Wireless Web via your phone. In

this menu, you can use the WAP browser.

For further details on the WAP browser, refer to the

WAP Browser User’s Manual supplied with your

phone.

Downloads (Menu 9.3)

Sounds

In this menu, you can view the list of sounds

downloaded from the server. You can set the

downloaded sounds as the current ring tone, but

cannot send the sounds to other phones.

When the memory is full, a warning message is

displayed and the phone rejects additional sounds

until you erase obsolete ones.

112

113

Solving Problems

Before contacting the after-sales service, perform

the following simple checks. They may save you the

time and expense of an unnecessary service call.

“No service,” “Network failure” or “Not

done” is displayed

• The network connection was lost. You may be in a

weak signal area (in a tunnel or surrounded by

buildings). Move and try again.

When you switch your phone on, the

following messages may appear

• You are trying to access an option for which you

have not taken out a subscription with your

service provider. Contact the service provider for

further details.

Insert SIM Card

• Check that the SIM card is correctly installed.

Phone Locked Enter Password

You have entered a number but it was

not dialed

• The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

• Have you pressed the

key?

• Are you accessing the right cellular network?

Enter PIN

• You may have set an outgoing call barring option.

• You are using your phone for the first time. You

must enter the Personal Identification Number

supplied with the SIM card.

Your correspondent cannot reach you

• The PIN Check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN Check menu

option (Menu 6.6.1).

• Is your phone switched on (the

for more than one second)?

key pressed

• Are you accessing the right cellular network?

• You may have set an incoming call barring option.

Enter PUK

• The PIN code was entered incorrectly three times

in succession and the phone is now blocked.

Enter the PUK supplied by your network operator.

Your correspondent cannot hear you

speaking

• Have you switched off the microphone?

• Are you holding the phone close enough to your

mouth? The microphone is located at the bottom

of the phone.

114

115

Solving Problems

Access Codes

There are several access codes that are used by

your phone and its SIM card. These codes help you

protect the phone against unauthorized use.

The phone starts beeping and

“**Warning** Low Battery” flashes on

the display

• The battery is insufficiently charged. Replace the

battery and recharge it.

When requested for any of the codes explained

below, key in the appropriate code (displayed as

asterisks) and press the OK soft key. If you make a

The audio quality of the call is poor

mistake, press the

key until the incorrect digit

is cleared and then continue entering the correct

code.

• Check the signal strength indicator on the display

(

); the number of bars indicates the signal

strength from strong ( ) to weak ( ).

The access codes, except for the PUK and PUK2

codes can be changed using Security menu

options (Menu 6.6). See page 90 for further

details.

• Try moving the phone slightly or moving closer to

a window if you are in a building.

Important! Avoid using access codes resembling

emergency numbers, such as 911, so

that you do not dial an emergency

number accidentally.

No number is dialed when you recall a

Phonebook entry

• Check that the number has been stored correctly,

by using the Phonebook Search feature.

• Re-store the number, if necessary.

Phone Password

The Phone Lock feature uses the phone password to

protect your phone against unauthorized use. The

phone password is supplied with the phone and is

factory set to 00000000.

If the above guidelines do not help you to solve

the problem, take a note of:

To...

Refer to...

• the model and serial numbers of your phone

• your warranty details

• a clear description of the problem

activate/deactivate the

Phone Lock feature

page 91

(

Menu 6.6.3).

page 91

Menu 6.6.4).

Then contact your local dealer or Samsung after-

sales service.

change the phone

password

(

116

117

Access Codes

PIN2

The

ersonal

dentification

umber or PIN (4 to

The PIN2 (4 to 8 digits), supplied with some SIM

cards, is required to access specific functions, such

as setting the maximum cost of a call. These

functions are available if supported by your SIM

card.

8 digits) protects your SIM card against unauthorized

use. It is usually supplied with the SIM card.

If you enter an incorrect PIN three times in

succession, the code is disabled and cannot be used

until you re-enable it by entering the PUK (see

below).

If you enter an incorrect PIN2 three times in

succession, the code is disabled and you cannot

access the functions until you re-enable it by

entering the PUK2.

To...

Refer to...

activate/deactivate the

PIN Check feature

page 90

To change the PIN2, refer to page 92

(

Menu 6.6.1).

page 91

Menu 6.6.2).

(Menu 6.6.6).

change the PIN

(

PUK2

The 8-digit PUK2 (

ersonal

nblocking

2),

PUK

supplied with some SIM cards, is required to change

a disabled PIN2. If you lose the code, contact your

service provider.

The 8-digit PUK (

Personal

Unblocking

Key) is

required to change a disabled PIN. The PUK may be

supplied with the SIM card. If not, or you have lost

it, contact your service provider.

To re-enable your PIN2:

1. Key in the PUK2 and press the OK soft key.

To re-enable your PIN:

2. Enter a new PIN2 of your choice and press the

OK soft key.

1. Key in the PUK and press the OK soft key.

3. When the Confirm PIN2 message is displayed,

key in the same code again and press the OK

soft key.

2. Enter a new PIN of your choice and press the

OK soft key.

3. When the Confirm New PIN message is

displayed, key in the same code again and press

the OK soft key.

If you enter an incorrect PUK2 ten times in

succession, you will not be able to access the

functions requiring the PIN2. Contact your service

provider for a new card.

If you enter an incorrect PUK ten times in

succession, the SIM card becomes invalid. Contact

your service provider for a new card.

118

119

Health and Safety Information

Health and Safety

Information

SAR tests are conducted using standard operating

positions specified by the FCC with the phone

transmitting at its highest certified power level in all

tested frequency bands. Although the SAR is

determined at the highest certified power level, the

actual SAR level of the phone while operating can

be well below the maximum value. This is because

the phone is designed to operate at multiple power

levels so as to use only the power required to reach

the network. In general, the closer you are to a

wireless base station antenna, the lower the power

output of the phone.

Exposure to Radio Frequency (RF)

Signals

Your wireless phone is a radio transmitter and

receiver. It is designed and manufactured not to

exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal

Communications Commission (FCC) of the U.S.

Government. These limits are part of

comprehensive guidelines and establish permitted

levels of RF energy for the general population. The

guidelines are based on the safety standards

previously set by both U.S. and international

standards bodies:

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC

that it does not exceed the limit established by the

government-adopted requirement for safe

exposure. The tests are performed in positions and

locations (e.g., at the ear and worn on the body) as

required by the FCC for each model. The highest

SAR value for this model phone when tested for use

at the ear is 0.182W/Kg and when worn on the

body, as described in this user guide, is 0.164W/Kg

(Body-worn measurements differ among phone

models, depending upon available accessories and

FCC requirements). While there may be differences

between the SAR levels of various phones and at

various positions, they all meet the government

requirement for safe exposure.

• American National Standards Institute (ANSI)

IEEE. C95.1-1992

• National Council on Radiation Protection and

Measurement (NCRP). Report 86. 1986

• International Commission on Non-Ionizing

Radiation Protection (ICNIRP) 1996

• Ministry of Health (Canada), Safety Code 6.

The standards include a substantial safety margin

designed to assure the safety of all persons,

regardless of age and health.

The FCC has granted an Equipment Authorization

for this model phone with all reported SAR levels

evaluated as in compliance with the FCC RF

emission guidelines. SAR information on this model

phone is on file with the FCC and can be found

under the Display Grant section of

The exposure standard for wireless phones employs

a unit of measurement known as Specific

Absorption Rate (SAR). The SAR limit

recommended by the FCC is 1.6W/kg.

http://www.fcc.gov/oet/fccid after searching on

FCC ID A3LSGHV205.

* In the U.S. and Canada, the SAR limit for mobile phones

used by the public is 1.6 watts/kg (W/kg) averaged over one

gram of tissue. The standard incorporates a substantial

margin of safety to give additional protection for the public

and to account for any variations in measurements.

120

121

Health and Safety Information

For body worn operation, to maintain compliance

with FCC RF exposure guidelines, use only

Samsung- approved accessories. When carrying the

phone while it is on, use the specific Samsung-

supplied or approved carrying case, holster, or

other body-worn accessory.

Precautions When Using Batteries

• Never use any charger or battery that is damaged

in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base

station, it uses less power; talk and standby time

are greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

Use of non-Samsung-approved accessories may

violate FCC RF exposure guidelines and should be

avoided.

For additional information concerning exposure to

radio frequency signals, see the following websites:

• Battery charging time depends on the remaining

battery charge and the type of battery and

charger used. The battery can be charged and

discharged hundreds of times, but it will

gradually wear out. When the operation time

(talk time and standby time) is noticeably shorter

than normal, it is time to buy a new battery.

Federal Communications Commission (FCC)

RF Safety program (select “Information on Human

Exposure to RF Fields from Cellular and PCS Radio

Transmitters”):

http://www.fcc.gov/oet/rfsafety

Cellular Telecommunications Industry

Association (CTIA): http://www.wow-com.com

• If left unused, a fully charged battery will

discharge itself over time.

World Health Organization (WHO)

International Commission on Non-lonizing Radiation

Protection (select Qs & As):

• Use only Samsung-approved batteries and

recharge your battery only with Samsung-

approved chargers. When a charger is not in use,

disconnect it from the power source. Do not leave

the battery connected to a charger for more than

a week, since overcharging may shorten its life.

http://www.who.int/emf

United Kingdom, National Radiological

Protection Board: http://www.nrpb.org.uk

• Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

U.S.Food and Drug Administration (FDA)

Center for Devices and Radiological Health:

http://www.fda.gov/cdrh/consumer/

122

123

Health and Safety Information

• Do not leave the battery in hot or cold places,

such as in a car in summer or winter conditions,

as you will reduce the capacity and lifetime of the

battery. Always try to keep the battery at room

temperature. A phone with a hot or cold battery

may temporarily not work, even when the battery

is fully charged. Li-ion batteries are particularly

affected by temperatures below 0 °C (32 °F).

Road Safety

Your wireless phone gives you the powerful ability

to communicate by voice, almost anywhere,

anytime. But an important responsibility

accompanies the benefits of wireless phones, one

that every user must uphold.

When driving a car, driving is your first

• Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object (coin,

clip or pen) causes a direct connection between

the + and – terminals of the battery (metal strips

on the battery), for example when you carry a

spare battery in a pocket or bag. Short-circuiting

the terminals may damage the battery or the

object causing the short-circuiting.

responsibility. When using your wireless phone

behind the wheel of a car, practice good common

sense and remember the following tips:

1. Get to know your wireless phone and its

features, such as speed dial and redial. If

available, these features help you to place your

call without taking your attention off the road.

• Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

2. When available, use a hands-free device. If

possible, add an extra layer of convenience and

safety to your wireless phone with one of the

many hands-free accessories available today.

3. Position your wireless phone within easy reach.

Be able to access your wireless phone without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, let your

voice mail answer it for you.

4. Let the person you are speaking with know you

are driving; if necessary, suspend the call in

heavy traffic or hazardous weather conditions.

Rain, sleet, snow, ice and even heavy traffic can

be hazardous.

5. Do not take notes or look up phone numbers

while driving. Jotting down a To Do list or

flipping through your Phonebook takes your

attention away from your primary responsibility,

driving safely.

124

125

Health and Safety Information

Operating Environment

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

pulling into traffic. Try to plan calls when your

car will be stationary. If you need to make a call

while moving, dial only a few numbers, check

the road and your mirrors, then continue.

Remember to follow any special regulations in force

in any area and always switch off your phone

whenever it is forbidden to use it, or when it may

cause interference or danger.

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

7. Do not engage in stressful or emotional

conversations that may be distracting. Make the

people with whom you are talking aware that

you are driving and suspend conversations that

have the potential to divert your attention from

the road.

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it

is recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

8. Use your wireless phone to call for help. Dial the

emergency number in the case of fire, traffic

accident or medical emergencies. Remember, it

is a free call on your wireless phone!

9. Use your wireless phone to help others in

emergencies. If you see a car accident, crime in

progress or other serious emergency where

lives are in danger, call the emergency number,

as you would want others to do for you.

Electronic Devices

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against

the RF signals from your wireless phone. Consult the

manufacturer to discuss alternatives.

10. Call roadside assistance or a special non-

emergency wireless assistance number when

necessary. If you see a broken-down vehicle

posing no serious hazard, a broken traffic

signal, a minor traffic accident where no one

appears injured, or a vehicle you know to be

stolen, call roadside assistance or any other

special non-emergency wireless

Pacemakers

Pacemaker manufacturers recommend that a

minimum distance of 15 cm (6 inches) be

maintained between a wireless phone and a

pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent

with the independent research and

number.appears injured, or a vehicle you know

to be stolen, call roadside assistance or any

other special non-emergency wireless number.

recommendations of Wireless Technology Research.

126

127

Health and Safety Information

Persons with pacemakers:

Vehicles

• Should always keep the phone more than 15 cm (6

inches) from their pacemaker when the phone is

switched on

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to

minimize potential interference

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

If you have any reason to suspect that interference is

taking place, switch off your phone immediately.

Posted Facilities

Switch off your phone in any facility where posted

notices require you to do so.

Hearing Aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such interference,

you may wish to consult your hearing aid

manufacturer to discuss alternatives.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause

an explosion or fire resulting in bodily injury or even

death.

Other Medical Devices

If you use any other personal medical devices,

consult the manufacturer of your device to determine

if it is adequately shielded from external RF energy.

Your physician may be able to assist you in obtaining

this information. Switch off your phone in health care

facilities when any regulations posted in these areas

instruct you to do so. Hospitals or health care

facilities may be using equipment that could be

sensitive to external RF energy.

Users are advised to switch off the phone while at a

refueling point (service station). Users are

reminded of the need to observe restrictions on the

use of radio equipment in fuel depots (fuel storage

and distribution areas), chemical plants or where

blasting operations are in progress.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas

(such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust

or metal powders, and any other area where you

would normally be advised to turn off your vehicle

engine.

128

129

Health and Safety Information

Emergency Calls

Other Important Safety Information

This phone, like any wireless phone, operates using

radio signals, wireless and landline networks as well

as user-programmed functions, which cannot

guarantee connection in all conditions. Therefore,

you should never rely solely on any wireless phone

for essential communications (medical

• Only qualified personnel should service the phone

or install the phone in a vehicle. Faulty

installation or service may be dangerous and may

invalidate any warranty applicable to the device.

• Check regularly that all wireless phone

equipment in your vehicle is mounted and

operating properly.

emergencies, for example).

Remember, to make or receive any calls the phone

must be switched on and in a service area with

adequate signal strength. Emergency calls may not

be possible on all wireless phone networks or when

certain network services and/or phone features are

in use. Check with local service providers.

• Do not store or carry flammable liquids, gases or

explosive materials in the same compartment as

the phone, its parts or accessories.

• For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including both installed or portable

wireless equipment in the area over the air bag or

in the air bag deployment area. If wireless

equipment is improperly installed and the air bag

inflates, serious injury could result.

To make an emergency call:

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

• Switch off your phone before boarding an aircraft.

The use of wireless phones in aircraft may be

dangerous to the operation of the aircraft, and is

illegal.

3. Press the

key.

If certain features are in use (call barring, for

example), you may first need to deactivate those

features before you can make an emergency call.

Consult this document and your local cellular

service provider.

• Failure to observe these instructions may lead to

the suspension or denial of telephone services to

the offender, or legal action, or both.

When making an emergency call, remember to give

all the necessary information as accurately as

possible. Remember that your phone may be the

only means of communication at the scene of an

accident; do not cut off the call until given

permission to do so.

130

131

Health and Safety Information

• Do not paint the phone. Paint can clog the

device’s moving parts and prevent proper

operation.

Care and Maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for

many years.

• Do not put the phone in or on heating devices,

such as a microwave oven, a stove or a radiator.

The phone may explode when overheated.

• Use only the supplied or an approved

• Keep the phone and all its parts and accessories

out of the reach of small children’s.

replacement antenna. Unauthorized antennas or

modified accessories may damage the phone and

violate regulations governing radio devices.

• Keep the phone dry. Precipitation, humidity and

liquids contain minerals that will corrode

electronic circuits.

• If the phone, battery, charger or any accessory is

not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if necessary, arrange for service.

• Do not touch the phone with wet hands while it is

charging. Doing so may give you an electric

shock or damage the phone.

• Do not use or store the phone in dusty, dirty

areas, as its moving parts may be damaged.

IMPORTANT SAFETY

INSTRUCTIONS - SAVE THESE

INSTRUCTIONS.

• Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt

certain plastics.

DANGER- TO REDUCE THE RISK

OF FIRE OR ELECTRIC SHOCK,

CAREFULLY FOLLOW THESE

INSTRUCTIONS.

• Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the

phone, which may damage the phone’s electronic

circuit boards.

FOR CONNECTION TO A SUPPLY

NOT IN THE U.S. A., USE AN

ATTACHMENT PLUG ADAPTOR

OF THE PROPER

CONFIGURATION FOR THE

POWER OUTLET.

• Do not drop, knock or shake the phone. Rough

handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or

strong detergents to clean the phone. Wipe it

with a soft cloth slightly dampened in a mild

soap-and-water solution.

132

133

Health and Safety Information

However, there is no guarantee that interference

will not occur in a particular installation. If this

equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is

encouraged to try to correct the interference by one

or more of the following measures:

Acknowledging Special Precautions and

the FCC and Industry Canada Notice

Cautions

Modifications not expressly approved by the party

responsible for compliance could void the user's

authority to operate the equipment.

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment

and receiver.

FCC Compliance Information

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is

connected.

This device complies with Part 15 of FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference,

and

• Consult the dealer or an experienced radio/ TV

technician for help.

2. This device must accept any interference

received.

Including interference that may cause undesired

operation.

Information to User

This equipment has been tested and found to

comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits

are designed to provide reasonable protection

against harmful interference in a residential

installation.

This equipment generates, uses and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may cause

harmful interference to radio communications.

134

135

Health and Safety Information

Product with a rebuilt, reconditioned or new Product. Repaired/

replaced leather cases, pouches and holsters will be warranted

for a period of ninety (90) days. All other repaired/replaced

Product will be warranted for a period equal to the remainder of

the original Limited Warranty on the original Product or for 90

days, whichever is longer. All replaced parts, components,

boards and equipment shall become the property of SAMSUNG.

If SAMSUNG determines that any Product is not covered by this

Limited Warranty, Purchaser must pay all parts, shipping, and

labor charges for the repair or return of such Product.

STANDARD LIMITED WARRANTY

What is Covered and For How Long? SAMSUNG

TELECOMMUNICATIONS AMERICA, L.P. (“SAMSUNG”) warrants

to the original purchaser (“Purchaser”) that SAMSUNG’s Phones

and accessories (“Products”) are free from defects in material

and workmanship under normal use and service for the period

commencing upon the date of purchase and continuing for the

following specified period of time after that date:

Phone

1 Year

What Are the Limits On SAMSUNG’s Liability? EXCEPT

AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED

HEREIN, PURCHASER TAKES THE PRODUCT “AS IS,” AND

SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND

THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED,

Batteries

1 Year

Leather Case/ Pouch

Holster

Other Phone Accessories

90 Days

1 Year

STATUTORY OR OTHERWISE, OF ANY KIND WHATSOEVER WITH

RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO:

What is Not Covered? This Limited Warranty is conditioned

upon proper use of Product by Purchaser. This Limited Warranty

does not cover: (a) defects or damage resulting from accident,

misuse, abuse, neglect, unusual physical, electrical or

•

THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS

FOR ANY PARTICULAR PURPOSE OR USE;

WARRANTIES OF TITLE OR NON-INFRINGEMENT;

DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE

PRODUCT;

•

electromechanical stress, or modification of any part of Product,

including antenna, or cosmetic damage; (b) equipment that has

the serial number removed or made illegible; (c) any plastic

surfaces or other externally exposed parts that are scratched or

damaged due to normal use; (d) malfunctions resulting from

the use of Product in conjunction with accessories, products, or

ancillary/peripheral equipment not furnished or approved by

SAMSUNG; (e) defects or damage from improper testing,

operation, maintenance, installation, or adjustment; (f)

installation, maintenance, and service of Product, or (g) Product

used or purchased outside the United States or Canada. This

Limited Warranty covers batteries only if battery capacity falls

below 80% of rated capacity or the battery leaks, and this

Limited Warranty does not cover any battery if (i) the battery

has been charged by a battery charger not specified or

approved by SAMSUNG for charging the battery, (ii) any of the

seals on the battery are broken or show evidence of tampering,

or (iii) the battery has been used in equipment other than the

SAMSUNG phone for which it is specified.

•

THE WORKMANSHIP OF THE PRODUCT OR THE

COMPONENTS CONTAINED THEREIN; OR

COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS

OF ANY LAW, RULE, SPECIFICATION OR CONTRACT

PERTAINING THERETO.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL

BE CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY

KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL

IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY

OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE, ARE HEREBY LIMITED TO THE SAME

DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY

STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS,

SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. IN

ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY

DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE,

USE, OR MISUSE OF, OR INABILITY TO USE THE PRODUCT OR

ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS

OF USE OF THE PRODUCT OR FROM THE BREACH OF THE

EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,

CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF

ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES

ARISING FROM ANY TORT (INCLUDING NEGLIGENCE OR

GROSS NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS

AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT

OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY

OTHER PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE

EXCLUSION OR LIMITATION OF INCIDENTAL OR

What are SAMSUNG’s Obligations? During the applicable

warranty period, SAMSUNG will repair or replace, at SAMSUNG’s

sole option, without charge to Purchaser, any defective

component part of Product. To obtain service under this Limited

Warranty, Purchaser must return Product to an authorized

phone service facility in an adequate container for shipping,

accompanied by Purchaser’s sales receipt or comparable

substitute proof of sale showing the date of purchase, the serial

number of Product and the sellers’ name and address. To obtain

assistance on where to deliver the Product, call Samsung

Customer Care at 1-888-987-4357. Upon receipt, SAMSUNG

will promptly repair or replace the defective Product. SAMSUNG

may, at SAMSUNG’s sole option, use rebuilt, reconditioned, or

new parts or components when repairing any Product or replace

136

137

Health and Safety Information

Glossary

CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR

EXCLUSION MAY NOT APPLY TO YOU.

To help you understand the main technical terms

and abbreviations used in this booklet and take full

advantage of the features on your mobile phone,

here are a few definitions.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND

YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM

STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED

WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER’S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS

LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY

REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR

UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY

FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH

PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE

CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS

THE LAW PERMITS.

Active Flip

Ability to answer a call simply by opening the

phone.

THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE

THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION

WITH THE PRODUCT. SAMSUNG MAKES NO WARRANTIES OR

REPRESENTATIONS AND THERE ARE NO CONDITIONS,

EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE

QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR

SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,

WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT IS

INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR

OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY

SUCH SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE

QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND

SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR

EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE

DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH THIRD-PARTY

SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.

Call Forwarding

Ability to reroute calls to another number.

Call Holding

Ability to put one call on standby while answering or

making another call; you can then switch between

the two calls, as required.

Call Waiting

Ability to inform users that they have an incoming

call when engaged on another call.

This Limited Warranty allocates risk of Product failure between

Purchaser and SAMSUNG, and SAMSUNG’s Product pricing

reflects this allocation of risk and the limitations of liability

contained in this Limited Warranty. The agents, employees,

distributors, and dealers of SAMSUNG are not authorized to

make modifications to this Limited Warranty, or make additional

warranties binding on SAMSUNG. Accordingly, additional

statements such as dealer advertising or presentation, whether

oral or written, do not constitute warranties by SAMSUNG and

should not be relied upon.

GSM (Global System for Mobile

Communication)

International standard for cellular communication,

guaranteeing compatibility between the various

network operators. GSM covers most European

countries and many other parts of the world.

Samsung Telecommunications America, L.P.

1130 East Arapaho Road

Richardson, Texas 75081

Phone: 1-800-SAMSUNG

Phone: 1-888-987-HELP (4357)

Line Identification Services (Caller ID)

reserved.

Services allowing subscribers to view or block the

telephone numbers of callers.

No reproduction in whole or in part allowed without prior written

approval.

Specifications and availability subject to change without notice.

[080802]

138

139

Glossary

MMS (Multimedia Message Service)

PUK (PIN Unblocking Key)

A message service for the mobile environment,

standardized by the WAP Forum and the 3rd

Generation Partnership Program (3GPP). For phone

users, MMS is similar to Short Message Service

(SMS)-it provides automatic, immediate delivery of

user-created content from phone to phone. The

message addressing used is primarily phone

numbers, thus the traffic goes from phone to

phone. MMS also provides support for e-mail

addressing, so that messages can also be sent by

e-mail. In addition to the text content of SMS, MMS

messages can contain still images, voice or audio

clips, and later also video clips and presentation

information.

Security code used to unlock the phone when an

incorrect PIN has been entered three times in

succession. The eight-digit number is supplied by

the service provider with the SIM card.

Roaming

Use of your phone when you are outside your home

area (when traveling for example).

SDN (Service Dialing Numbers)

Telephone numbers supplied by your network

provider and giving access to special services, such

as voice mail, directory inquiries, customer support

and emergency services.

Multiparty Calling

Ability to establish a conference call involving up to

five additional parties.

SIM (Subscriber Identification Module)

Card containing a chip with all the information

required to operate the phone (network and

memory information, as well as the subscriber’s

personal data). The SIM card fits into a small slot

on the back of the phone and is protected by the

battery.

Phone Password

Security code used to unlock the phone when you

have selected the option to lock it automatically

each time it switches on.

SMS (Short Message Service)

PIN (Personal Identification Number)

Network service sending and receiving messages to

and from another subscriber without having to

speak to the correspondent. The message created

or received can be displayed, received, edited or

sent.

Security code that protects the phone/SIM against

unauthorized use. The PIN is supplied by the

service provider with the SIM card. It may be a four

to eight-digit number and can be changed, as

required.

140

141

Glossary

Soft Keys

Two keys marke

and

on the phone, the

purpose of which:

• Varies according to the function that you are

currently using

• Is indicated on the bottom line of the display just

above the corresponding key

Tri Band

Ability to handle any of the following types of

network; GSM 900, GSM 1800, combined GSM 900/

1800 and GSM 1900 MHz bands, for greater call

success and wider roaming.

Your phone automatically searches for the last

network used. If, for any reason, this network is

unavailable, your phone will attempt to register

with a different network.

Voice Mail

Computerized answering service that automatically

answers your calls when you are not available,

plays a greeting (optionally in your own voice) and

records a message.

142

Index

redialing automatically

•

Access codes • 117

Accessories •

Active folder • 95

Alarm, set (7.4) • 103

Alert type (5.3) • 83

Answering

time (3.4) • 77

via phonebook • 38

waiting (8.2) • 52

Camera (4) • 79

Card

installing the SIM • 17

108

a call • 26

Care • 132

Changing

a second call • 52

Anykey answer • 95

Auto light • 94

Auto power, alarm • 103

Auto redial (6.5) 95

password (6.6.4) • 91

PIN (6.6.2) • 91

PIN2 (6.6.6) • 92

Characters

changing mode • 44

entering • 43

Charging battery • 19

Conference call • 53

Connect tone • 86

Contrast (6.7.1) • 93

Copying

Background image • 88

Backlight • 15 93

Band selection (8.5) • 111

Battery

charging • 19

low battery indicator

memos • 99

phonebook number • 37

task • 101

•

precautions • 123

Correcting numbers • 23

Currency Exchange (7.6)

Broadcast (1.5) • 67

•

105

Calculator (7.5) • 104

Calendar (7.1) • 97

Caller ID (8.4) • 110

Calls

Date setting (7.3.2) • 102

Deleting

memos • 99

answering

messages • 62

a call • 26

missed calls • 28 76

phonebook number • 37

tasks • 101

a second call • 52

emergency • 130

ending • 24

forwarding (8.1) • 106

holding • 49

incoming (3.2) • 76

international • 23

making • 23

Display

contrast • 93

icons • 14

layout • 13

setting language • 90

Downloads (9.3) • 112

missed • 27 76

multiparty • 53

outgoing (3.3) • 77

records (3) • 76

143

Index

Keypad tone (5.4) • 83

Keys

Muting

key tones • 51

searching/dialing • 38

speed-dialing • 41

Earpiece volume • 25

Editing

description • 11

location • 10

shortcut • 96

microphone • 50

storing numbers/names

My contents (1.7) • 69

•

memos • 98

messages • 62

missed calls • 27

phonebook number • 37

tasks • 100

to do list • 100

Photos, take • 79

Picture message, create • 73

Names

changing • 91

checking • 90

code • 118

Language (6.5) • 90

Last number, redial • 24

entering • 43

searching/dialing • 38

storing • 34

Emergency calls • 130

Error tone • 85

Length of calls • 77

PIN2

Letters

Network selection (8.3)

changing • 92

code • 119

changing mode • 44

entering • 43

•

109

Network services (8) • 106

Numbers

Power on/off (5.7) • 85

Problem solving • 114

PUK • 118

Light

backlight • 15

service • 16 94

FDN mode (6.6.5) • 92

Fixed Dial Number mode • 92

Folder tone (5.6) • 85

Forwarding calls (8.1) • 106

Funbox (9) • 112

copying phonebook • 37

correcting • 23

PUK2 • 119

Locking phone (6.6.3) • 91

Low battery indicator • 20

Lower-case characters

entering • 46

erasing • 37

fixed dial • 92

own • 89

Functions

pasting phonebook • 36

searching/dialing • 38

storing • 34

Read messages

multimedia (2.1) • 70

text (1.1) • 61

Redialing

automatically • 95

last number • 24

Reset setting (6.10) • 96

Ring

tone (5.1) • 82

type (6.3) • 83

volume (6.2) • 82

Roaming • 109

selecting • 30

Maintenance • 132

Memory status

message (1.8) • 69

phonebook • 42

Memos

Game (9.1) • 112

Greeting message (6.3) • 89

Options

selecting • 30

Organizer (7) • 97

Outgoing calls (3.3) • 77

Own number (6.4) • 89

copying • 99

deleting • 99

editing • 98

writing • 98

Holding calls • 49

Icons

Menus

accessing by scroll • 55

accessing by shortcuts

Password, phone

changing • 91

code • 117

description • 14

Safety

Identifying a caller • 26

Incoming calls (3.2) • 76

Infrared activate (6.1) • 87

Internet • 112

•

information • 120

list • 56

Phone

precautions •

Schedule • 97

Message tone (5.5) • 84

Microphone, mute • 50

Minute minder • 86

lock (6.6.3) • 91

password • 117

settings (6) • 87

Phonebook

Searching in phonebook • 38

Security (6.6) • 90

IrDA port • 87

Missed calls • 27 76

Selecting functions/options

Morning Call • 103

copying • 37

editing • 37

erasing • 37

options • 36

pasting • 36

•

Sending

key tones • 51

messages • 63

Service light • 16 94

Multimedia message, view

Key tones

•

adjusting volume • 25

muting • 51

selecting (5.4) • 83

sending • 51

Multiparty calls

dropping • 54

making • 53

private conversation • 53

144

145

Index

Setting

Tone

connect • 86

alarm (7.4) • 103

date (7.3.2) • 102

language (6.5) • 90

time (7.3.1) • 102

Shortcut (6.9) • 96

Silent mode • 30

SIM card

error • 85

folder • 85

keypad • 83

message • 84

power on/off • 85

ring • 82

installing • 17

Travel adapter • 19

locking • 92

SIM Lock (6.6.5) • 92

SMS

message icon• 61

setup • 65

Unpacking •

Upper-case characters

entering • 46

using • 52 61

Soft keys • 30

Solving problems • 114

Sound settings (5) • 82

Speed-dialing • 41

Switching on/off

Vibration • 83

Voice mail (1.6) • 68

Voice server • 68

Volume

microphone • 50

phone • 21

adjusting • 25

selecting the ring • 82

T9 mode • 45

Tasks

defining • 99

editing • 100

Templates (1.3) • 65

Text

Waiting call • 52, 108

WAP browser (9.2) • 112

World time (7.3.3) • 102

Write messages

changing mode • 44

entering • 43

picture (2.3) • 73

text (1.2) • 63

Text messages

broadcast (1.5) • 67

reading (1.1) • 61

setup (1.4) • 65

templates (1.3) • 65

writing (1.2) • 63

Time

Writing memos • 98

call • 77

format (7.3.4) • 102

setting (7.3.1) • 102

world (7.3.3) • 102

To do list (7.2) • 99

146

147

148

Xerox 400400 User Manual
Toastmaster MEFB2W User Manual
The Singing Machine SMG 299 User Manual
Tascam SX 1LE User Manual
Sony Ericsson W610C User Manual
Sony Ericsson REVISION C Z500A User Manual
Seagate SAVVIO ST9600104SS User Manual
Seagate BARRACUDA 720011 User Manual
Samsung SAM 2000i User Manual
Pantech P2030 User Manual