SGH-T809
P O R T A B L E Q u a d - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
UVEJ5_1.1_WCt809_101705_F8
Printed in Korea.
GH68-07931A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by holding down the
key until the power-off image displays.
1. Remove the back cover. To do so, slide the back cover off
in the direction of the arrow (1).
2. Lift the back cover away, as shown (2).
6
Activating Your Phone
3. Remove the battery. Grasp the bottom of the battery (1)
and lift up. Pull the battery out and away (2).
4. Slide the SIM card into the SIM card socket so that the
card locks into place. Make sure the gold contacts of the
card face into the phone.
Note: When you need to remove the SIM card, slide it, as shown, and take
it out of the socket.
Section 1: Getting Started
7
5. Place the battery so that the 3 brass tabs on the end
align with the 3 brass prongs at the bottom of the battery
compartment (1). Press the battery down until it clicks
into place (2).
6. Replace the back cover. Make sure that the battery is
properly installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
Atraveladaptercomeswithyourphoneforchargingthe
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
this causes the phone to charge more slowly.
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately 200
minutes.
1. With the battery in position in the phone, plug the
connector of the travel adapter into the jack at the
bottom of the phone.
8
Activating Your Phone
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone.
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Battery
low” message repeats at regular intervals on the display.
Section 1: Getting Started
9
When this happens, your phone turns off the backlight to
conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Slide the phone open.
2. Press and hold the
key until the phone switches on.
3. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the
key. For further details, see "PIN
The phone searches for your network and after finding it,
the Idle screen appears. Now, you can make or receive
calls.
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see "Language"
4. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up
voicemail:
1. Open your phone to access the keypad.
2. In Idle mode, press and hold the
key on the keypad.
3. Follow the tutorial to create a password, a greeting, and
your name.
10
Setting Up Your Voice Mail
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
YoucanaccessyourVoiceMailbypressingthe
keyon
the keypad or by going to the menu. To access Voice Mail
using the menu:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or
the
key.
4. Highlight Call voice mail and press the Select soft key
or the
key. Your phone dials the specified voice mail
number.
5. When connected, follow the voice prompts from the
voice mail center.
Changing the Voice Mail Number
YourSIMcardgivesyouthedefaultservicenumberofthe
voice mail center. However, should you need to change
the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
Section 1: Getting Started
11
4. Highlight Voice server number and press the Select
soft key or the
key. Highlight Empty and press the
Options soft key.
5. Highlight Edit and press the Select soft key or the
key. Or, you may highlight Delete to delete the number.
6. Edit the name if desired, and then press the Down
Navigation key to edit the number.
7. Press the Options soft key, highlight the Save option,
and press the Select soft key or the
key.
8. Press the key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Display Layout
• Get More Help
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few
of the features included in your phone.
• Bluetooth Technology
• Instant Messaging capability
• Multimedia capability
• Fun & Apps feature provides file manager, MP3 player, games,
image editor, alarms, calendar, calculator, world time, unit
conversion, timer, and stopwatch.
View of Your Phone
The following illustrations show the main elements of
your phone:
14
Keys
Keys
The following list correlates to the illustrations.
1. During a call, adjusts the earpiece volume.
In Idle mode with the phone open, adjusts the ring
volume. With the phone closed, turns on the external
display when held down.
2.
Performs the functions indicated by the screen text on
the bottom line of the display.
3. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
4. In Idle mode, accesses voice mail when held down.
5. The headset jack is used for the hands-free headset.
6. Enters special characters. Performs various functions.
7. External speakers allow you to hear sounds and music.
8. The microphone used during phone calls and voice note
recordings.
9. Enters numbers, letters, and some special characters.
10. TransFlash memory card slot. This expansion slot allows
you to insert a TransFlash memory card to add
additional memory and storage capacity.
11. The Cancel key deletes characters from the display.
In Menu mode, it returns you to the previous menu level.
Section 2: Understanding Your Phone
15
12. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
13. In Idle mode, launches the WAP (Wireless Application
Protocol) browser.
In Menu mode, selects the highlighted menu options.
When the Left soft key shows Options, it is the
short-cut key to select the first option in the options list.
14. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode:
ⅷ
Down key: allows you to access the Phonebook Search
menu directly.
ⅷ
Up key: allows you to access the Camera or Camcorder
feature directly.
ⅷ
ⅷ
Left key: allows you to access Text messaging directly.
Right key: allows you to access the Voice notes feature
directly.
When entering text, moves the cursor to the left or right,
depending on which side you press.
15. Display area where text and graphics are displayed.
16. Used to listen to audio from your phone.
17. The built-in digital camera/camcorder has video capture
capabilities.
16
Display Layout
Display Layout
The display has 4 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a TransFlash memory card has been
inserted.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified
time. For details, see page "Alarm" on page 130.
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page "Call forwarding" on page 106.
Section 2: Understanding Your Phone
17
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
Appears when Silent Mode is active.
Appears when Mute is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Bluetooth: appears when Bluetooth wireless technology is
active.
Backlight
A backlight illuminates the display and the keypad.
When you press any key or slide the phone open, the
backlight comes on. It goes off when no keys are pressed
withinagivenperiodoftime,dependingonthesettingin
the Backlight menu. The display turns off after one
minute to conserve battery power.
TheOnsettingishowlongthekeypadbacklightison.You
can select 15 seconds, 30 seconds, 1 minute, 3 minutes, or
10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 5 seconds, 15 seconds, 30 seconds, 1 minute, or
3 minutes.
To specify your Backlight settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
18
Get More Help
3. Highlight the Display settings option and press the
Select soft key or the key.
4. Highlight the Backlight option and press the Select soft
key or the key.
5. Highlight the On option. Use the Left or Right Navigation
key to select the time that the backlight is on. You may
choose between 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
6. Press the Down key to take you to the Dim option. Use
the Left or Right Navigation key to select the time that
Dimming mode is on. You may choose between Off, 5
seconds, 15 seconds, 30 seconds, 1 minute, or 3
minutes.
7. Press the Save soft key to save your settings.
Get More Help
Get More Help is designed to show you some of the
featuresofyourphoneusingt-zones.Youcansearchhelp
files on the fly while traveling, at home or anywhere,
using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Get More Help
icon. Press the Select soft key or the
key.
3. You will enter t-zones and the Get More Help menu will
be displayed.
The following options are available:
Section 2: Understanding Your Phone
19
• Browse Help Topics: this option gives you a list of different
topics that you can select.
• Enter a Search: this option allows you to enter a keyword to
search on.
• About: this option offers general information about Get More
Help including concept and site design, copyright information,
and contact email address.
To access the browser options menu:
1. Press the Menu soft key to see the Browser Options.
2. Make a selection and press the Select soft key or the
key.
Note: The menus may vary, depending on your version of t-zones.
For more information on browser options, see "Selecting
20
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Records
• Silent Mode
• Selecting Functions and Options
Thissectiondescribeshowtomakeoransweracall.Italso
includes information on the features and functionality
associated with making or answering a call.
Section 3: Call Functions
21
Making a Call
Whentheidlescreendisplays,enterthenumberyouwish
to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone, provided your call is not sent
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the
enter a missing digit.
key. You can also
3. To clear the whole display, press and hold the
Ending a Call
key.
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the caller is identified.
To recall any of these numbers:
22
Making a Call
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers and highlight the number you want.
4. To dial the number, press the
key.
Before you dial the number, you may press the Options
soft key for the following options:
•
Details: Displays details of the number including name,
number, and dates and times of calls.
•
Call back: Places a call back to the number.
• Store to phonebook: Stores the number in your
phonebook.
•
Send message: Allows you to send a text message, picture
message, or voice notes to the number.
• Delete: Allows you to delete the number or delete all call
records.
Making a Call from the Phonebook
You can store phone numbers that you use regularly on
the SIM card or in the phone’s memory. These entries are
collectively called the Phonebook.
Once you have stored a number in the Phonebook, you
candialitbypressingafewkeys.Youcanalsoassignyour
mostfrequently-usednumberstonumberkeysusingthe
Speed Dial feature.
For further details about the Phonebook feature, see
Section 3: Call Functions
23
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Press the
key to increase the volume level and the
key to decrease the level.
In Idle mode, you can also adjust the ring volume using
these keys while the phone is open.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call image.
The caller’s phone number, or name if stored in
Phonebook, displays.
1. If necessary, slide the phone open. Press the
key or
the Accept soft key to answer the incoming call.
If the Anykey answer option in the Extra Settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
24
Call Records
Note: To reject an incoming call, press the Reject soft key or
key.
2. End the call by closing the phone or pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Records
All incoming, outgoing and missed calls are listed in the
Call Records. You can also view Call time records.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Call records
icon. Press the Select soft key or the key to enter the
menu.
Note: You can also access the call records of incoming, outgoing, and
missed calls by pressing the
key in Idle mode.
The following Call Record options are available:
All calls
This menu lets you view the 90 most recent calls you
received, sent, and missed.
The number or name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Section 3: Call Functions
25
Note: at any time while you are in Call Records, you may use the Left or
Right Navigation key to scroll between All calls, Missed calls, Incoming
calls, and Outgoing calls.
Missed calls
This menu lets you view the 30 most recent calls you
received, but did not answer.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you have missed displays on the idle
screen immediately after a call is missed.
To view a missed call immediately:
1. If the phone is closed, slide the phone open.
2. Press the View soft key.
Thenumbercorrespondingtothemostrecentmissedcall
displays, if available.
3. To scroll through the missed calls, press the Up or Down
Navigation key.
4. To call the number displayed, press the
key.
5. Press the Options soft key for the following options:
• Details: Displays details of the number including name,
number, and dates and times of calls.
26
Call Records
• Call back: Places a call back to the number.
• Store to phonebook: Stores the number in your
phonebook.
• Send message: Allows you to send a text message, picture
message, or voice notes to the number.
• Delete: Allows you to delete the number or delete all call
records.
You can press the
key at any time to exit the Missed
Call feature.
Incoming calls
This menu lets you view the 30 most recent calls you
received.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Outgoing calls
This menu lets you view the 30 most recent calls you
dialed.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Delete all
This menu allows you to delete all of the records in each
call record separately, or you can delete all of your call
records at one time.
1. Highlight the type of calls you want to delete and press
the
key to make a check mark.
2. Press the Delete soft key to delete the calls.
Section 3: Call Functions
27
3. When a confirmation message displays, press the Yes
soft key or key to confirm.
Call time
This menu lets you view the time log for calls made and
received.
Note: The actual time invoiced by your service provider may differ from
times displayed due to network features and service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
• Life time: shows the total length of time for incoming and
outgoing calls. The length of call time must be at least 1 minute
to increment this field. This information cannot be cleared.
• Reset timers: allows you to reset the call timers. At the Are
you sure? prompt, press the Yes soft key. Enter the phone
password and then press the OK soft key or
key.
Note: The password is preset to “00000000” at the factory. To change this
Silent mode
Silent mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
InIdlemode, pressand holdthe
keyuntilthe“Silent
Mode On” message and the Silent mode icon ( ) display.
28
Selecting Functions and Options
In Silent mode, instead of sounds, your phone will
vibrate.
To exit and reactivate the previous sound settings, press
and hold the
key again until “Exit Silent Mode”
message appears. The Silent mode icon ( ) no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
andsub-menuallowsyoutoviewandalterthesettingsof
a particular function.
Soft Keys
The roles of the soft keys vary depending on the function
you are currently using. The labels on the bottom line of
the display just aboveeachkeyindicatetheircurrentrole.
Press the right soft key
to access the
Phonebook menu.
Press the left soft key
for Menu mode.
Section 3: Call Functions
29
Selecting Options
To view the various functions and options available and
to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the
key.
3. To view the next function or highlight the next option on a
list, press the Down Navigation key.
4. To move back to the previous function or option on a list,
press the Up key.
5. To move back up one level in the menu structure, press
the Back soft key.
6. To exit the menu structure without changing the settings,
press the
key.
When you access a list of options, your phone highlights
thecurrentlyactiveoption.If,however,thereareonlytwo
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Putting a Call on Hold
Youcanplacethecurrentcallonholdwheneveryouwant.
You can make another call while you have a call in
progress if your network supports this service.
30
Selecting Functions and Options
To place a call on hold, simply press the Options soft key,
highlight the Hold option, then press the Select soft key
or the
key. You can reactivate the call whenever you
want, by pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Phonebook.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or:
1. Press the Options soft key and select Hold.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may
switchbetweenthetwocalls, changingtheoneonholdto
active and placing the other on hold.
Toswitchbetweenthetwocalls,simplypresstheOptions
soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivatedsothatyoucancontinueconversingwiththat
person.
When you want to finish, end each call normally by
pressing the
key.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone
off, so that the other person cannot hear you.
Section 3: Call Functions
31
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key and highlight the Mute
option.
2. Press the Select soft key or the
key. The other person
can no longer hear you. The Mute icon is displayed.
To switch the microphone back on:
1. Press the Options soft key and highlight the Unmute
option.
2. Press the Select soft key or the
key. The other person
can hear you again.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key to turn the Speakerphone on.
2. To turn the Speakerphone off, press the Spkr off soft
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmittheDTMF(DualToneMulti-Frequency)tonesof
the keys, which allows you topress keys without hearing
annoying key tones during a call.
32
Selecting Functions and Options
Note: To communicate with answering machines or computerized
telephone systems, the Send keys option must be selected.
Send DTMF
You can use the Send DTMF option to send a key string
ornumberduringaphonecall.Forexample,youcansend
a calling card number by DTMF while on a call. Select the
SendDTMFoptionandenteranumber.PresstheOKsoft
key and the number is sent.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key.
2. Press the Down key to highlight the Phonebook option
and press the Select soft key or the
key.
3. Press the Down key to highlight the Contact list option
and press the Select soft key or the
key.
The Phonebook entries are listed.
4. Enter the name that you wish to find in the textbox
located above the entries. If you enter the first few letters
of the name, the Phonebook entries are listed starting
with the first entry matching your input.
Or, use the Up or Down Navigation key to highlight the
contact that you desire.
5. To view the highlighted entry, press the Options soft
key.
6. Highlight the View option and press the Select soft key
or the
key. The Contact is displayed.
Section 3: Call Functions
33
For further details about the Phonebook feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
you have set the Call waiting menu to Activate. You are
notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Options soft
key, highlight Swap and press the Select soft key or the
key.
Toendacallonhold,presstheOptionssoftkeyandselect
theEndheldcalloption. ThenpresstheSelect softkeyor
the
key.
To end the current call, press the
key.
Making a Multi-Party Call
Amulti-partycallisanetworkservicethatallowsuptosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
34
Selecting Functions and Options
3. To join the first participant to the multi-party call, press
the Options soft key or the
key and select Join.
Press the Select soft key or the
key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the
the Select soft key or the
key. Select the Join option and press
key.
You can add incoming callers by answering the call and
pressing the Options soft key or the key, and selecting
Join. Repeat as required.
Having a Private Conversation With One Participant
1. Press the Options soft key or the
key and choose the
Split option. Press the Select soft key or the
key.
The list of call participants appears.
2. Highlight a person you wish to talk privately with by
pressing the Up or Down Navigation key, and press the
Select soft key or the
key.
Now you can talk only to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key or the
key or the
key and select Join. Press the Select soft
key.
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key or the
key and choose the
Split option. Press the Select soft key or the
key.
Section 3: Call Functions
35
The list of call participants appears.
2. Highlight the person you want to keep. Press the Options
soft key and highlight End held multiparty. Press the
Select soft key or the
key.
The call with the participant on hold will end, but you can
continue to talk to the other participants.
3. When you want to end the multi-party call, close the
phone or press the
key.
36
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Security for example,
you can access them by pressing the Select soft key or
the
key after the sub-menu has been highlighted.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
Navigation keys.
5. To confirm the chosen setting, press the Select soft key,
or the
6. To return to the previous menu level, press the Back soft
key, or the key.
key.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Themenuitems,suchasmenus,sub-menus,andoptions,
are numbered and can be accessed quickly by using their
38
Menu Outline
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Security.
Menu Outline
Thefollowinglistshowsthemenustructureandindicates
the number assigned to each option.
1
2
Voice notes
Call records
2.1 All calls
2.2 Missed calls
2.3 Incoming calls
2.4 Outgoing calls
2.5 Delete all
2.6 Call time
2.6.1
2.6.2
2.6.3
2.6.4
2.6.5
Last call time
Total incoming
Total outgoing
Life time
Reset timers
3
t-zones
3.1 Home
Section 4: Menu Navigation
39
3.2 Favorites
3.3 Go to URL
3.4 Clear cache
4
Instant messaging
4.1 AIM
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
Sign on
Saved conversations
Offline conversations
Settings
Help
4.2 ICQ
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
Connect
Saved conversations
Offline conversations
Settings
Help
4.3 Yahoo!
4.3.1
4.3.2
4.3.3
4.3.4
4.3.5
Sign In
Saved conversations
Offline conversations
Settings
Help
5
Messages
5.1 Create new
5.1.1
5.1.2
5.1.3
Text message
Picture message
Voice note
5.2 Inbox
5.3 Sentbox
5.4 Outbox
5.5 Drafts
40
Menu Outline
5.6 Templates
5.6.1
Text template
5.6.2
Picture message template
5.7 Voice mail
5.7.1
Call voice mail
5.7.2
Voice server number
5.8 Delete all
5.9 Settings
5.9.1
Text message
5.9.2
Picture message
5.0 Broadcast messages*
5.* Memory status
6
Fun & Apps
6.1 File manager
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
6.1.6
6.1.7
Sounds
Images
Videos
Music
Other files
Memory card
Memory status
6.2 MP3 player
6.3 Games
6.4 Image editor
6.5 Organizer
6.5.1
6.5.2
6.5.3
6.5.4
6.5.5
6.5.6
Alarm
Calendar
Calculator
World time
Unit conversion
Timer
Section 4: Menu Navigation
41
6.5.7
Stopwatch
7
8
Get More Help
Camera
8.1 Take and send
8.2 Record video
8.3 My photos
8.4 My videos
8.5 My Album
8.6 My Journal
9
Settings
9.1 Time & Date
9.2 Phone settings
9.2.1
9.2.2
9.2.3
9.2.4
9.2.5
9.2.6
Language
Greeting message
Slide settings
Volume key
USB settings
Extra settings
9.3 Display settings
9.3.1
9.3.2
9.3.3
9.3.4
9.3.5
9.3.6
9.3.7
9.3.8
9.3.9
Wallpaper
Main menu style
Info display
Interior display
Brightness control
Backlight
Dialing display
Calendar
Show caller information
9.4 Sound settings
9.4.1
Incoming call
42
Menu Outline
9.4.2
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
Keypad tone
Message tone
Power on/off
Slide tone
Silent mode
Extra tones
9.5 Network services
9.5.1
9.5.2
9.5.3
9.5.4
9.5.5
Call forwarding
Call barring*
Call waiting
Network selection
Caller ID
9.6 Bluetooth
9.6.1
9.6.2
9.6.3
9.6.4
9.6.5
9.6.6
9.6.7
Turn Bluetooth On/Off
My devices
My visibility
My phone name
Security modes
Features
Help
9.7 Security
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
9.7.6
9.7.7
PIN check
Change PIN
Phone lock
Change password
Privacy
FDN mode
Change PIN2
9.8 Memory status
9.8.1
9.8.2
9.8.3
9.8.4
9.8.5
9.8.6
Shared memory
Messages
File manager
Calendar
Phonebook
Games
Section 4: Menu Navigation
43
9.9 Reset settings
* Shows only if supported by your SIM card.
44
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using ABC Mode
• Using T9 Mode
• Using Number Mode
• Using Symbol Mode
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
45
Changing the Text Input Mode
Whenusingyourphone,youwilloftenneedtoentertext,
suchaswhenstoringanameinyourPhonebook,creating
your personal greeting or scheduling events on your
calendar.Youcanenteralphanumericcharactersbyusing
your phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want. How many times you
press the key determines which letter or number appears.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing
can enter J, K, or L.
However, the T9 mode automatically compares the series of
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer
keystrokes than the traditional ABC mode.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message.
46
Using ABC Mode
1. To change the text input mode, press the Right soft key.
2. Each time you press the Right soft key, a different Text
input mode indicator will be displayed at the lower right
corner of your display.
The following options are available:
: T9 mode
: Number mode
: Symbol mode
: ABC mode
3. When the text input mode indicator that you desire is
displayed, you may enter text in the text message box
using the selected text input mode.
Using ABC Mode
TouseABCmode,usethenumberkeystoenteryourtext.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
Section 5: Entering Text
47
• And so on
2. Select the other letters in the same way.
• To enter periods or hyphens, press the
key. ABC mode
applies grammar rules to ensure that correct punctuation is
used.
• To shift case in ABC mode, use the
key. There are 3
cases: Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the
key. Press and hold the
key to clear the display.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
48
Using T9 Mode
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
Section 5: Entering Text
49
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
to display alternative word choices for the keys that you
have pressed.
key
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the
key and start
entering the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the
key to display the alternative
words.
2. When you press the
key at the last alternative
word, the display shows Spell on the bottom line. Press
the Spell soft key or the key.
3. Enter the word you want to add using ABC mode.
4. Press the OK soft key or the key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
Note: This feature may not be available for some languages.
50
Using Number Mode
• To enter periods, hyphens, or apostrophes, press the
key.
T9 mode applies grammar rules to ensure that correct
punctuation is used.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To delete
letters, press the
clear the display.
key. Press and hold the
key to
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and
punctuation marks into text.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the
key. When the
input field is empty, this key returns the display to the
previous mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the
key.
Section 5: Entering Text
51
52
Section 6: Understanding Your
Phonebook
Topics Covered
• Storing a Number in the SIM Card
• Storing a Number in the Phone’s Memory
• Finding a Phonebook Entry
• Dialing a Number from Phonebook
• Speed Dialing
• Editing a Caller Group
• Dialing a Number from SIM Card
• Copying all SIM Phonebook Entries
• Deleting all of the Phonebook Entries
• My Name Card
• Finding My Own Phone Number
• FDN List
• Management
This section allows you to manage your contacts by
storing their name and number in your Phonebook.
Phonebookentriescanbesortedbyname,entry,orgroup.
Section 6: Understanding Your Phonebook
53
Storing a Number in the SIM Card
1. At the Idle screen, press the Phonebook soft key.
2. Scroll to Add new contact by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Highlight SIM card and press the Select soft key or the
key.
Note: You can set the Default saving option to SIM card, Phone memory or
Ask on saving in the Management menu. So if you always want to save
your new contacts to your phone, for example, this step of the procedure
information.
4. Enter a name in the Name text box. Tab to the next text
box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
5. Enter a number you want to store and press the Save
soft key or the
card.
key. The number is saved in your SIM
After storing, the phone displays the Phonebook entry
you just created.
6. To use the entry options before saving the number, press
the Options soft key.
The following options are available:
• Save: saves the number in the SIM card.
• Language select: allows you to select between English,
French, or Spanish.
54
Storing a Number in the Phone’s Memory
• Cancel: cancels the Add New Contact screen and returns you
to the previous menu.
7. To use the entry options after saving the number, press
the Options soft key.
The following options are available:
• Edit: allows you to edit the name and number fields in the
entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: allows you to call the number.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Copy to: allows you to copy the number to your Phone, SIM
card or FDN.
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To
cancel, press the No soft key.
8. To return to the Idle screen, press the
key.
Storing a Number in the Phone’s Memory
If you want to store a number in your phone’s memory,
you have 2 different options. You can save it to your SIM
card and then copy it to your phone, or you can change
your Default Saving option to Phone so that all your new
contacts will be saved to Phone. See "Default saving" on
page 65 for information on how to change this setting.
Section 6: Understanding Your Phonebook
55
Note: When you copy a phone number from your SIM card to your phone,
the number will appear twice in your Contact list.
1. At the Idle screen, press the Phonebook soft key.
2. Scroll to Add new contact by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Highlight Phone and press the Select soft key or the
key.
Note: You can set the Default saving option to SIM card, Phone memory or
Ask on saving in the Management menu. So if you always want to save
your new contacts to your phone, for example, this step of the procedure
information.
4. Enter a first name in the Name text box. Tab to the next
text box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
5. Enter a last name in the text box.
6. Highlight a number Type by pressing the Up or Down
Navigation key, then enter a number in the text box.
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Office: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
56
Finding a Phonebook Entry
• Other: allows you to enter more detailed information for the
entry.
7. Continue to scroll down using the Down Navigation key
to enter Email address, Picture ID, Ringtone, Group, and
Notes if desired.
8. Press the Save soft key or press the Options soft key
and highlight the Save option and press the Select soft
key or the
key. The number is saved to your phone
and the new contact information is displayed.
9. To return to the Idle screen, press the
key.
Finding a Phonebook Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. When the idle screen displays, press the Phonebook
soft key.
2. Highlight Contact list and press the Select soft key or
the
key.
3. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first
entry matching your input.
4. If needed, press the Up or Down Navigation key until the
entry you want is highlighted.
Section 6: Understanding Your Phonebook
57
5. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
following Phonebook entry options:
• View: shows details of the Phonebook entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• New contact: takes you to the New Contact menu.
• Call: places a call to the number.
• Delete: allows you to delete the selected name and number
from your Phonebook or delete all numbers. You are asked to
confirm that you wish to delete the name and number by
pressing the Yes soft key. To cancel, press the No soft key.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Language select: allows you to select between English,
French, or Spanish.
6. If you select the View option, press the Options soft key
after the contact information is displayed, for these
additional options:
• Edit: allows you to edit the name and number fields in the
entry. You can also add email address and notes.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: places a call to the number.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Copy to: allows you to copy the number to your phone, SIM
card or FDN.
58
Dialing a Number from Phonebook
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
After viewing one Phonebook entry, you can scroll
through all Phonebook entries by pressing the Right or
Left Navigation keys.
Dialing a Number from Phonebook
Once you have stored phone numbers in the Phonebook,
youcandialthemeasilyandquicklybyusingthelocation
numbers that were assigned to them in the Phonebook.
Note: If you cannot remember a location number, you must go into the
Contact list menu in the Phonebook menu to search for the entry by
name. For details, "Finding a Phonebook Entry" on page 57.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, youcansetup to8 speeddialentriesand
then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys
(2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. When the Idle screen displays, press the Phonebook soft
key.
Section 6: Understanding Your Phonebook
59
2. Scroll to Speed dial by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to select the number
key to which you wish to assign the speed-dialing
number. Select from the 2 to 9 keys, and press the Add
soft key.
4. Highlight Contact list or FDN list and press the Select
soft key or the
5. Highlight the entry that you want to assign the speed dial
number to and press the Select soft key or the key.
key.
Note: Memory location 1 is reserved for your Voice mail server number and
cannot be changed.
Editing a Caller Group
1. When the idle screen displays, press the Phonebook soft
key.
2. Highlight the Group option and press the Select soft key
or the
key.
3. Scroll through the group list by pressing the Up or Down
Navigation key.
4. Highlight the group you want and press the Options soft
key.
5. Highlight the Edit option and press the Select soft key or
the
key.
6. To edit the Caller group name, modify the text in the
Name text box.
60
Editing a Caller Group
7. To change the image associated with the Caller group,
press the Down key to highlight the Picture ID icon.
Press the
key.
The following options are available:
• Take picture: allows you to take a picture with your camera.
• My photos: allows you to choose a photo from My photos
folder.
• Downloaded images: allows you to choose a photo from
your downloaded images folder.
• Icons: allows you to choose from pre-defined icons
• My videos: allows you to choose a video from your My
videos folder.
• Downloaded videos: allows you to choose a video from
your Downloaded videos folder.
• Do not assign: removes any image that was previously
used and sets to Not assigned status.
8. To change the ringtone associated with the Caller group,
press the Down key to highlight the Ringtone icon.
Press the
key.
The following options are available:
• Default melodies: allows you to choose between 25
different melodies.
• Voice list: allows you to assign a Ringtone from your Voice
list.
• My sounds: allows you to assign a Ringtone from your My
sounds folder.
• Music: allows you to assign a Ringtone from your Music list.
9. When you are finished, press the Save soft key. Your
Caller group settings will be saved.
Section 6: Understanding Your Phonebook
61
10. Press the
key to return to Idle mode.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the
key.
key or the
The entry associated with the location number will be
displayed.
2. If you don’t know the location number, press
and the first location number will be displayed.
You can then press the Left or Right key to find other
numbers in the list.
3. Press the Dial soft key, the
key, or the
key when
you have selected the number you want to dial.
Copying all SIM Phonebook Entries
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created in your Phonebook.
1. Press Phonebook soft key.
2. Highlight Management and press the Select soft key or
the
3. Highlight Copy all to phone and press the Select soft
key or the key.
key.
4. After receiving the Sure to copy all? confirmation
message, press the Yes soft key.
62
Deleting all of the Phonebook Entries
Note: Options are available for phone entries that are not available when
stored to the SIM card. For details see "Storing a Number in the Phone’s
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s
memory, your SIM card, or both.
Important! Once Phonebook entries have been deleted, they cannot be
recovered.
1. When the idle screen displays, press the Phonebook soft
key.
2. Highlight Management and press the Select soft key or
the
key.
3. Scroll to Delete all by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Press the
key to place a check mark by the memory
location you want to empty; All, Phone, SIM Card, or SIM
Card (FDN).
You can remove the check mark by pressing the
again.
key
5. Press the Delete soft key to delete the entries in the
selected memory location.
6. When the Delete? confirmation message appears, press
the Yes soft key or the key.
7. To cancel the deletion, press the No soft key.
Section 6: Understanding Your Phonebook
63
8. When you are finished, press the
key to return to
Idle mode.
My Name Card
My Name Card allows you to create a virtual business
card.Oncecompleted,youcansendthecardtorecipients
as a V-card attachment.
1. When the idle screen displays, press the Phonebook soft
key.
2. Highlight My name card and press the Select soft key or
the
key.
3. My Name Card opens with the Name field highlighted.
4. Enter information in each of the fields as desired. Use the
Navigation keys to move between fields, then use the
keypad to enter information.
5. When finished, press the Save soft key or press the
Options soft key and highlight the Save option. Press the
Select soft key or the
key.
Finding My Own Phone Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any way affect the actual subscriber numbers on your
SIM card.
1. When the idle screen displays, press the Phonebook soft
key.
64
FDN List
2. Select the Own number option by pressing the Up or
Down Navigation key and press the Select soft key or
the key.
3. Highlight the Empty option and press the Options soft
key or the key. Your phone number is displayed. You
may edit the number if you wish. Press the Save soft key
or the key.
FDN List
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The FDN List allows you to set up a list of numbers that
your phone may dial.
FDN mode must first be enabled in the Security settings.
changing this setting.
ToenableFDNmode,aPIN2numberisrequired.Youcan
obtain your PIN2 from your service provider.
Management
The Management menu allows you to select where your
contacts will be saved, copy your SIM contacts to your
phone, delete your contacts, or check your memory
status.
Default saving
The Default saving option allows you to choose where
your contacts will be saved. The following options are
available:
Section 6: Understanding Your Phonebook
65
• SIM card: new phonebook contacts will be saved to your SIM
card.
• Phone memory: new phonebook contacts will be saved to your
phone.
• Ask on saving: you will be prompted to choose between Phone
memory or SIM card whenever you save a new contact.
Copy all to phone
ThisoptionallowsyoutocopyallcontactsfromyourSIM
card to your phone. For more information, see "Copying
Sort by contacts
This options allows you to have your contacts sorted by
first name or last name.
Delete all
Important! Once contact entries have been deleted, they cannot be
recovered.
This option allows you to delete your contacts. You may
delete from SIM, Phone, FDN, or All. For more
information, see "Deleting all of the Phonebook Entries"
Memory status
You can check how many names and numbers are stored
in the Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
1. When the idle screen displays, press the Phonebook soft
key.
66
Management
2. Highlight Management and press the Select soft key or
the
key.
3. Select the Memory status option by pressing the Up or
Down Navigation key and press the Select soft key or
the
key.
4. When you are finished, press the
key or the Back
soft key.
Section 6: Understanding Your Phonebook
67
68
Section 7: Messages
Topics Covered
• Voice Notes
• Text Messages
• Picture Messages
• Inbox
• Sentbox
• Outbox
• Drafts
• Templates
• Voice mail
• Delete All
• Settings
• Broadcast Messages
• Instant Messaging
• Memory Status
This section describes how to send or receive different
types of messages. It also includes the features and
functionality associated with messaging.
Section 7: Messages
69
Types of Messages
Your phone provides the following message types:
• Voice Notes
• Text Messages
• Picture Messages
• Voice Mail Messages
• Broadcast Messages (SIM Dependent)
• Instant Messaging
Voice Notes
In this menu, you can record a voice note of up to one
minute long and then immediately send it by a Picture
Messaging message.
Whenyouaccessthismenu,atimerappearsonthescreen.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Voice notes icon.
Press the Select soft key or the
key to enter the
menu.
3. Press the Record soft key to start recording.
4. Record a memo by speaking into the microphone.
The display shows the elapsed time and the remaining
time at one time.
5. When you are finished, press the Stop soft key. Or, when
the recording time is expired, the display switches to the
next screen.
6. Press the Options soft key for the following options:
70
Voice Notes
• Send: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the Voice note and enables you to
record another one.
• Set default destination: allows you to remove or edit the
default destination.
• Save: saves the Voice note and continues to the Send option.
7. To send the Voice note, select the Send option in the
Options menu and press the Select soft key or the
key.
8. Highlight one the following options:
• Recent log: allows you to select a number or an address
from the 20 last destinations you entered for sending the last
messages.
• Phonebook: allows you to enter the phone number you want
from your phonebook. Use the
key to check the selected
entries.
• Phone number: allows you to enter a phone number.
• Email address: allows you to enter an email address to
send the voice note to.
• My Album: allows you to send the voice note to My Album.
• My Journal: allows you to send the voice note to My
Journal.
9. Press the Select soft key or the
key.
10. Select where you would like to send your voice note
then and it will be entered in the Send menu in a To
field.
11. To add another destination, select Empty and press the
Options soft key.
Section 7: Messages
71
Note: When entering multiple destinations, you can also choose Group,
Change recipient, and Back options in addition to the other send options.
12. Repeat from step 8. You can enter up to 20 destinations.
13. When you have finished entering the destinations, press
the Options soft key, highlight the Send option and press
the Select soft key or the
key.
Your phone sends the message. After sending, the
message is saved in the Sentbox.
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple pictures, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
newtextmessages.Whenthememoryisfull,themessage
icon will flash on your phone and you cannot receive any
newmessages. Youmustdeleteamessagebeforeyoucan
receive additional messages.
Use the Delete option in each message box to delete
obsolete messages.
Create new
In this menu, you can write and send a text message.
72
Text Messages
Creating a Simple Text Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Text message option and press the Select
soft key or the key.
5. Create your message.
You can enter up to 160 standard Alphabet characters per page in your
message. The message can be up to 12 pages long for a total of 1920
characters.
6. When you finish entering your message, press the
Options soft key. The following options are available:
• Send: allows you to send the message.
• Insert text via: allows you to insert Text template,
Phonebook, or Favorite. The Text template allows you to apply
one of the preset message templates to the text. Select one of
the 10 items stored in the Text messages template menu.
Phonebook allows you to add names and phone numbers to
your message. Favorites allows you to add internet addresses
to your message.
• Add content: allows you to add a picture, animation, or
melody to your message.
Section 7: Messages
73
• Attach: allows you to attach Name card, Schedule,
Anniversary, Miscellaneous, or To do items to your message.
• Save to Drafts: save the message to your Phone or SIM.
• Language select: allows you to set the language to
English, French, or Spanish.
• Text style: allows you to format the style of the text.
For the Text size, Large, Medium, and Small size are available.
Text mode options are Normal, Underline, and Strikethrough.
The options for Bold and Italic are set by using the
key to
place a checkmark by them. Alignment options are Left,
Center, and Right.
• Back: allows you save to your draft folder without sending.
7. Highlight the Send option and press the Select soft key
or the
key.
8. Highlight one of the following options:
• Recent log: allows you to select from recipients of your
previous messages.
• Phonebook: allows you to select the phone number(s) you
want from your phonebook.
• Phone number: allows you to enter a number to send your
message to.
9. If you chose Recent log or Phonebook, use the
key
to place checkmarks next to the entry or entries you
want your message sent to and press the Next softkey.
10. If you chose Phone number, enter the number in the To
text box.
11. To add another destination, select an Empty option and
press the Options soft key.
74
Picture Messages
Note: When entering multiple destinations, you can also choose Group and
Save to Drafts options in addition to the other send options.
12. Repeat from step 8. You can enter up to 20 destinations.
13. When you have finished entering the destinations, press
the Options soft key, highlight the Send option and press
the Select soft key or the
key.
Picture Messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
deliveryofpersonalmultimediamessagesfromphoneto
phone or from phone to e-mail.
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice, and audio clips. A Picture Messaging message is a
multimedia presentation in a single file. It is not a text file
with attachments.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia files,
such as photos, videos, sounds and images you
downloaded from the Internet and voice notes you
recorded. Thisfunctionisavailableonlyifitissupported
by your service provider. Only phones that offer
multimedia messaging features can receive and display
multimedia messages.
Section 7: Messages
75
Create new
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Picture message option and press the
Select soft key or the key.
5. Highlight Subject and press the
key.
6. Enter the subject of your message and press the
key.
7. To add a picture or video clip, highlight the Image &
Video option and press the
8. Highlight one of the following options and press the
Select soft key or the key.
key.
• Pictures: allows you to take a picture to include, or select a
picture from your different picture folders or memory card.
• Videos: allows you to record a video to include, or select a
video from your different video folders or memory card.
76
Picture Messages
9. Select a picture or video from the various options
available.
10. Highlight the picture or video and press the Options soft
key. Highlight the Add option and press the Select soft
key or the
key to add it to your message.
11. To add a sound, highlight the Sound option and press the
key.
Note: if you attached a video clip to your message, you will not be able to
add audio to the message.
12. Highlight one of the following options and press the
Select soft key or the
key.
• Record audio: allows you to record a new audio message.
• My sounds: allows you to select a sound from your My
sounds folder.
• Voice list: takes you to the Voice list folder to select a voice
message to add.
13. Select a Sound or Voice note and press
key. Press the
Add soft key to add the sound to your message.
14. To add a message, highlight Message and press the
key.
15. Enter your message and press the
key.
16. When you have finished creating the message, press the
Options key and highlight the Send option. Press the
Select soft key or the
key.
17. Highlight one of the following options:
• Recent log: allows you to select from recipients of your
previous messages.
Section 7: Messages
77
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• Phone number: allows you to enter a phone number.
• Email address: allows you to enter an email address.
• My Album: allows you to send the message to the My Album
folder.
• My Journal: allows you to send the message to My Journal.
18. After selecting where to send your message, press the
Options softkey and highlight the Send option. Press the
Select soft key or the
key. Your phone sends the
message.
Inbox
The Inbox stores messages that you have received. You
can tell what kind of message it is by the icon displayed.
If the icon envelope is open then the message has been
read, otherwise it will appear closed.
The following types of messages may appear in your
inbox:
Voice notes
Text messages
Multimedia messages
Push messages
When you enter the Inbox, the list of messages displays
with the sender’s phone numbers, or names, if available
in your Phonebook. After you have read themessage, the
envelope in the icon will appear opened.
78
Inbox
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Inbox option and press the Select soft key
or the key.
Viewing a Text Message in Inbox
1. Select a text message from the list and press the
Options soft key.
The following options will appear:
• View: read the text message.
• Reply via: allows you to send a reply to the sender by
sending a text or picture message.
• Call back: places a call to the selected number.
• Delete: deletes the selected text message or all messages.
• Move to phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
for messages stored in the SIM card.
• Move to SIM card: allows you to move the message from
the phone’s memory to the SIM card. This option is only
available for messages stored in the phone’s memory.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
Section 7: Messages
79
2. Highlight the View option and press the Select soft key
or the key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While reading a text message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Delete: allows you to delete the message.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is only available for
messages stored in the SIM card.
• Move to SIM card: allows you to move the message from the
phone’s memory to the SIM card. This option is only available
for messages stored in the phone’s memory.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Protection: allows you to lock the message to protect it from
being deleted.
Viewing a Picture Message in Inbox
1. Highlight a picture message from the list and press the
Options soft key.
The following options will appear:
• View: read the picture message.
80
Inbox
• Reply via: allows you to send a reply to the sender by
sending a picture message, text message, or voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Delete: deletes the selected picture message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While viewing a picture message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending
a text or picture message or a voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
Section 7: Messages
81
• Replay: allows you to view the message again.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the message to different areas
or to your vCard or vCalendar.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such as
time and date the message was received, the sender’s e-mail
address or phone number, recipient’s e-mail address or phone
number, Cc, message size, priority, and class.
Viewing a Voice Note in Inbox
1. Highlight a Voice note from the list and press the Options
soft key.
The following options will appear:
• View: listen to the voice note and view message details.
• Reply via: allows you to send a reply to the sender by
sending a picture message, text message, or voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the Voice note to another
number.
• Delete: allows you to delete the selected Voice note or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
82
Inbox
• Protection: allows you to lock the Voice note to protect it
from being deleted.
• Properties: shows you information about the Voice note,
such as time and date the Voice note was received, the
sender’s e-mail address or phone number, recipient’s e-mail
address or phone number, Cc, Voice note size, priority, and
class.
2. Highlight the View option and press the Select soft key
or the
key to listen to the message contents.
While listening to the message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message or a voice note.
• Reply all via: allows you to send a reply to All by sending a
picture message or voice note.
• Call back: places a call to the selected number.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to listen to the voice note again.
• Delete: allows you to delete the voice note.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Save media: allows you to save the message to different areas
or to your vCard or vCalendar.
• Protection: allows you to lock the message to protect it from
being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
Section 7: Messages
83
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
Viewing a Push Message in Inbox
A Push message is a way of delivering content (e.g.
images, ringtones, etc.) to mobile phones that are WAP
enabled.WithaPushmessageyoudon'tactuallysendthe
content in the text message, you direct the mobile phone
where to get it from.
1. Select a Push message from the list and press the
Options soft key.
The following options will appear:
• View: listen to the Voice note and view message details.
• Delete: allows you to delete the selected message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
2. Highlight the View option and press the Select soft key
or the
key to listen to the message contents.
While reading the message, you may choose the
following options by pressing the Options soft key:
• Go to URL: allows you to go to the website on your WAP
browser.
• Delete: allows you to delete the message.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging Message icon.
84
Sentbox
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message
later in the Inbox.
2. Press the Options soft key or the
key to access the
key.
various options described above.
3. When you are finished, press the
Sentbox
This message box stores messages that you have sent.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Sentbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
Section 7: Messages
85
6. To scroll through the contents, press the Up or Down
Navigation key.
While reading a message, you can choose different
options by pressing the Options soft key.
Outbox
This message box stores messages that you have
attempted to send but have not actually been sent yet.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Outbox option and press the Select soft
key or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the View option and press the Select soft key
or the
key to view the message contents.
6. To scroll through the contents, press the Up or Down
Navigation key.
86
Drafts
While reading a message, you can choose different
options by pressing the Options soft key.
Drafts
This message box stores messages that you may want to
edit or send at a later time.
When you enter this menu, the list of messages in the box
displays.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Drafts option and press the Select soft key
or the key.
4. Select a message from the list and press the Options
soft key.
5. Highlight the Edit option and press the Select soft key or
the
key to edit the message contents.
6. To send the message, press the Options soft key and
highlight the Send option.
7. Press the Select soft key or the
key to send the
message.
Section 7: Messages
87
While viewing a draft message, you can choose different
options, depending on the type of message, by pressing
the Options soft key.
Templates
Besidesenteringmessagetextusingthekeypadkeys,you
can speed message composition by including copies of
stored text (Templates) in your message.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Templates option and press the Select soft
key or the key.
4. If you want templates for a text message, highlight the
Text template option and press the Select soft key or
the
key.
You can choose from ten predefined sentences that you
can add to your text message to save time.
5. If you want templates for a picture message, highlight
the Picture messages template option and press the
Select soft key or the
key.
You can choose between twelve different picture
message formats. You can then edit the parts that you
choose.
88
Voice Mail
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Voice mail option and press the Select soft
key or the key.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the voice server number obtained from your service
provider. You can then select this option and press the Select
soft key or the
key to listen to your messages. You can also
connect to the voice server by pressing and holding the
key in Idle mode.
• Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
Delete All
Thismenuallowsyoutodeleteallofthemessagesineach
messagebox. Or, youcanalsodeleteallofyourmessages
in all message boxes at one time.
1. To select a message box to clear, press the Up or Down
Navigation key. To delete all of your messages, select
the All option.
Section 7: Messages
89
2. To place or remove a check mark, press the
key.
3. Press the Delete soft key to delete the marked objects.
4. After you receive the Delete? confirmation, press the
Yes soft key to delete the selected message box
contents. Otherwise, press the No soft key.
Settings
In this menu, you can set up default text message, picture
message, and push message information. The last setting
you accessed is automatically activated for sending
subsequent messages.
Text message
• Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
• Destination address: allows you to enter a number that you
would like to send all messages to. You can still message
others, but this number will always appear in the Send list.
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report: allows you to activate or deactivate the report
function. When this function is activated, the network informs
you whether or not your message has been delivered.
90
Broadcast Messages (SIM Dependent)
Picture message
The following options are used to set Send and Receive
settings for Picture messages.
Send Settings
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry date: The expiration date is how long the message
receiver has to retrieve the message.
• Delivery after: you can set a delay time before the phone sends
your messages.
Receive Settings
• Anonymous reject: you can set your phone to automatically
reject anonymous messages.
• Advert allowed: allows you to receive advertisements.
• Report allowed: you can set the option to receive a delivery
report.
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Please contact your service provider for further details.
Instant Messaging
Instant Messaging (IM) is a way of sending short, simple
messages that are delivered immediately to users online
at that moment.
Section 7: Messages
91
Before using this feature, you need to subscribe to a
messenger service. For further details, contact your
service provider.
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Instant
messaging icon. Press the Select soft key or the
key
to enter the menu.
3. Highlight the messenger service to which you subscribed
using the Up or Down Navigation key and press the
Select soft key or the
key.
4. Highlight the Sign on, Connect, or Sign in option,
depending on your messenger service and press the
Select soft key or the
key.
5. Enter the required sign on information such as ID and
password and press the OK soft key.
Note: The information required for sign on will vary depending on the
instant messaging provider you are using.
6. Follow the on-screen instructions to read, reply to,
compose, send, and manage your IM account.
Using the Instant Messenger Options
Onthesign-onscreenofthemessenger,presstheOptions
soft key to access the following options:
• Sign on/Connect/Sign in: allows you to login to your IM
account.
92
Memory Status
• Saved conversations: shows permanent records of your IM
conversations.
• Offline conversations: shows dynamic records of your last 10
IM conversations.
• Settings: allows you to change your Default community and
Community settings.
• Help: provides various help information depending on the
community you have selected.
Memory Status
You can check the amount of the memory being used and
the memory remaining for text, multimedia, and push
messages.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
Section 7: Messages
93
94
Section 8: Changing Your Settings
Topics Covered
• Time & Date Settings
• Phone Settings
• Display Settings
• Sound Settings
• Network Services Settings
• Bluetooth
• Security Settings
• Memory Status
• Reset Settings
This section explains the sound and phone settings for
yourphone.Itincludesdisplaysettings,securitysettings,
and extra settings associated with your phone.
Section 8: Changing Your Settings
95
Time & Date Settings
Thismenuallowsyoutochangethecurrenttimeanddate
displayed.
The following options are available:
• Set time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time is
displayed in 12 hour or 24 hour format.
• Set date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD format.
• Week start day: allows you to choose between Sunday or
Monday as the day your week will start.
• Auto update: allows you to receive time information from your
service provider’s network.
• On: the phone automatically updates the time and date
according to the current time zone using the network
service.
• Confirm first: the phone asks for a confirmation before the
update.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
To change your time and date settings:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
96
Phone Settings
3. Highlight the Time & Date options and press the Select
soft key or the
key.
4. Use the Up or Down Navigation key to select the option
you wish to change.
5. To set Set time or Set date, use the Left or Right key to
position the cursor over the number you wish to change.
6. Enter the desired number.
7. To change other options, use the Left or Right key to
select the desired setting.
8. When you are finished changing your settings, press the
Save soft key to save your settings. Otherwise press the
Cancel soft key.
Note: Automatic updates of time and date do not change the time you have
set for alarm settings or calendar memos.
Phone Settings
You can customize various phone settings.
Language
ThismenuallowsyoutoselectadisplaylanguageforText
language and Input mode. Choose from English, French,
and Spanish.
Greeting message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
For details about entering characters, see "Section 5:
Section 8: Changing Your Settings
97
Slide settings
Thismenuallowsyoutosethowyourphonewillfunction
whenyouslideyourphoneopenorclosed.Thefollowing
options are available:
• Up: Select Accept call if you want the call to be answered
when you slide your phone open. Otherwise, select None.
• Down: Select Stop operation if you want the call to be
discontinued when you slide your phone closed. Otherwise,
select Continue operation.
Volume key
This menu allows you to set how your volume key will
operatewhenyoureceiveanincomingcall.Thefollowing
options are available:
• Mute: when this option is selected, the volume keys will act as
a Mute button to turn the sound off when you receive a call.
• Reject: when this option is selected, the volume keys will act as
a Reject button to reject a call when it is received.
USB settings
This menu allows you to set the USB settings you will
need to plug your phone into a USB port on a PC. The
following options are available:
• Modem: when this option is selected, you can use the PC
Studio application to:
• Synchronize contacts in your calendar.
• Transfer MP3 or image files from your PC directly to your
phone’s memory.
• Use your phone as a modem in a wireless network.
98
Display Settings
• Mass storage: select this option when you want to download
objects from a PC, such as MP3s or images, to your TransFlash
memory card.
Extra settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, highlight the feature and press the
key. A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and
press the
key. The check mark no longer displays.
The following options are available:
• Auto redial: when this option is checked, the phone makes
up to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can
answer an incoming call by pressing any key, except the
key or the Reject soft key. To reject the call, press the
key or the Reject soft key. When this option is unchecked,
you must press the
call.
key or Accept soft key to answer a
3. When you have finished changing your settings, press
the Save soft key to save your settings. Otherwise press
the Cancel soft key.
Display Settings
In this menu, you can change various settings for the
display or backlight.
Section 8: Changing Your Settings
99
Wallpaper
Thismenuallowsyoutochangethebackgroundimageor
the color of the text to be displayed in Idle mode.
The following options are available:
• Get more wallpaper: this option takes you to t-zones where
you can download wallpapers.
• Default wallpapers: allows you to choose from a list of
wallpapers included with your phone.
• My photos: allows you to choose a photo from My photos
folder.
• My downloads: allows you to choose a photo from your
downloaded images folder.
To change the background image:
1. Scroll through the list by pressing the Navigation keys.
2. When the image you want highlights, press the Save soft
key if selecting from Default wallpapers. Otherwise,
press the Options soft key. Highlight the Save option and
press the Select soft key or the
key.
Main menu style
This menu allows you to select how the icons will be
displayed in the main menu. Choose Block menu for the
traditional icon look or Flash menu for animated icons.
Info display
Thismenuallowsyoutosettextstyleandtextcolor. Press
the Left or Right Navigation key to change the settings.
100
Display Settings
Interior display
Youcanselectthecolorofthemenusdisplayed.Thereare
two different patterns to choose from.
Brightness control
You can adjust the display brightness to see it better in
different lighting conditions.
Press the Left or Right Navigation key or press the
Volume keys to adjust the brightness.
Backlight
In this menu, you can select the length of time that the
keypad backlight is on and how much longer the display
is illuminated before going off.
TheOnsettingishowlongthekeypadbacklightison.You
can select 15 seconds, 30 seconds, 1 minute, 3 minutes, or
10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 5 seconds, 15 seconds, 30 seconds, 1 minute or
3 minutes.
For example, if you set On for 30 seconds and Dim for 5
seconds, after30secondsthebacklightonthekeyswould
turn off and 5 seconds later the display light would turn
off.
Press the Left or Right Navigation key to adjust the
settings.
Section 8: Changing Your Settings
101
Dialing display
This menu allows you to select the size and color of your
dialing font. You can also set your background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft
key or the
key.
2. Use the Left or Right key to select between Large,
Medium, or Small.
3. Press the Save soft key or the
change. Otherwise, press the Cancel soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft
key or the key.
key to save your
2. Use the Left or Right key to select either Basic (black),
Rainbow, Monochrome, or Gradation.
3. Press the Save soft key or the
change. Otherwise, press the Cancel soft key.
To change the background color:
1. Highlight the Background color option and press the
Select soft key or the key.
key to save your
2. Use the Left or Right key to select between 10 different
colors or None.
3. Press the Save soft key or the
key to save your
change. Otherwise, press the Cancel soft key.
102
Sound Settings
Calendar
Thismenuallowsyoutosetacalendartodisplayoverthe
top of your wallpaper in Idle mode. Choose between On
or Off. The Calendar is set to Off by default.
Show caller information
By turning this option on, when you miss a call, caller
information such as name will be displayed on your
display when your missed calls are listed.
Sound Settings
Youcancustomizevarioussoundsettingsforyourphone.
Incoming call
Get more mega tones
UsingtheGetmoremegatonesoption,youcanaccessthe
web site preset by T-Mobile and download new sounds.
Get more HiFi Ringers
Using the Get More HiFi Ringers option, you can access
the web site preset by T-Mobile and download new HiFi
Ringers.
Ring tone
This menu allows you to select a ring melody. Highlight
Ring tone and press the key. Use the Up or Down key
to highlight a ring tone. Press the Select soft key or press
the
key.
Volume
This menu allows you to adjust the ring volume to one of
5 levels.
Section 8: Changing Your Settings
103
Use the Right or Left key to increase or decrease the
volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls. Use the Right or Left key to
select a ring tone.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then
starts ringing.
Keypad tone
This menu allows you to select the key tone and volume
that the phone sounds when you press a key.
Use the Right or Left key to make your selections.
To turn off the sound, select Off.
Message tone
This menu allows you to set up the ringer for incoming
messagesandemail. YoucansettheTone, Alerttype, and
Repetition.
Use the Right or Left key to make your selections.
Power on/off
Thismenuallowsyoutoselectthemelodythatthephone
sounds when it is switched on and off.
To turn off the sound, select Off.
104
Sound Settings
Slide tone
Thismenuallowsyoutoselectthemelodythatthephone
sounds when you slide open or close your phone.
To turn off the sound, select Off.
Silent mode
This menu allows you to select whether or not your
phone will vibrate while in quiet mode. You may choose
between Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark
displays in front of the option.
2. To turn a given tone off, press the
key. The check
mark no longer displays in front of the option.
The following options are available:
• Indicative tones: generates a tone whenever a pop-up window
appears on the screen.
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connection tone: sets whether or not the phone beeps when
your call is connected to the system.
• Alerts on call: sets whether or not you receive tones when a
message arrives while you are on a call.
Section 8: Changing Your Settings
105
Network Services Settings
Call forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague while
you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down Navigation key and then press the Select soft key
or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when your phone is busy.
• No reply: calls are forwarded when your phone is not
answered.
• Unreachable: calls are forwarded when you are not in an
area covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, Voice calls or Data calls, by
pressing the Up or Down Navigation key, and then press
the Select soft key or the
key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, select Activate by using the
Left or Right key.
106
Network Services Settings
4. To deactivate call forwarding, select Deactivate by
using the Left or Right key.
5. Enter the number to which the calls are to be forwarded
in the Forward to text box and press the Select soft key
or the
key.
To enter an international code, press and hold the
key until the + sign displays.
6. When you select Unavailable in step 1, select the length
of time the network waits for before forwarding a call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
Call barring (SIM Dependent)
Call Barring allows you to restrict specific types of
incomingandoutgoingcallsforyourphone.Thisisuseful
ifyouallowsomeonetouseyourphoneforashortperiod
of time.
Call waiting
Thisnetworkserviceinformsyouwhensomeoneistrying
to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to
which the call waiting option is to be applied by pressing
the Up or Down Navigation key and then press the
Select soft key or the
key.
Section 8: Changing Your Settings
107
The screen informs you whether call waiting is activated
or deactivated.
2. Highlight Activate or Deactivate and press the Select
soft key or the
key.
3. Call waiting will then be activated or deactivated.
4. Select the Cancel all option to deactivate Call waiting on
all voice and data calls.
Network selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change Network Selection mode:
1. Highlight the Search now option and press the Select
soft key or the
key.
2. Press the Up or Down Navigation key until the network
you want highlights and then press the Select soft key or
the
key.
The phone will scan for that network and you will be
connected.
To change you Default setup:
1. Highlight the Default setup option and press the Select
soft key or the key.
2. Highlight either the Automatic or Manual option and
press the Select soft key or the key.
108
Bluetooth
If you select Automatic, you are connected to the first
available network when roaming.
3. If you select Manual, press the Up or Down Navigation
key until the network you want highlights and then press
the Select soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other
person’s phone.
• Send number: your number is sent each time you make a call.
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to
beam information with Bluetooth. If the devices are
within a range of one another, you can exchange
Section 8: Changing Your Settings
109
information between them, even if they are located in
different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
ThisoptionallowsyoutoturnBluetoothOnorOff.Make
a selection and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth
devices. Highlight the Search new device option and
press the Select soft key or the
key. The phone will
search for available devices.
My visibility
ThisoptionallowsyoutoturnyourvisibilitytoOnorOff.
Make a selection and press the Select soft key or the
key.
My phone name
This option shows the name given to your phone for
Bluetooth purposes. You can edit the name if needed.
Security modes
This option allows you to set your security modes to On
orOff.MakeaselectionandpresstheSelectsoftkeyorthe
key.
Features
Actually, the Bluetooth specification is a protocol that
describes how the short-range wireless technology
works, whereas individual profiles describe the services
110
Security Settings
supported by individual devices. Profiles reduce the
chance that different devices will not work together.
The following Service profiles are available:
• Headset: The remote Bluetooth headset enables outgoing and
incoming calls.
• Handsfree: The remote Bluetooth car kit enables outgoing and
incoming calls.
• File transfer: The remote Bluetooth device enables users to
transfer files from their handset to others.
• Object push: The remote Bluetooth device enables the transfer
of personal data (e.g. vCard, vCalendar, etc.) to other devices.
• Dial up networking: The remote Bluetooth device enables
Internet access through a phone modem.
• Serial port: The remote Bluetooth device acts as a virtual serial
port.
Help
The Help option sends you to t-zones where you can
search for additional information.
Security Settings
TheSecurityfeatureenablesyoutorestricttheuseofyour
phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Section 8: Changing Your Settings
111
Note: Before enabling or disabling the PIN Check feature, you must enter
your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is
switched on.
Change PIN
This feature allows you to change your current PIN,
provided that the PIN check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see "Change password" on
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when
you switch on the phone.
112
Security Settings
Change password
TheChangepasswordfeatureallowsyoutochangeyour
currentphonepasswordtoanewone.Youmustenterthe
current password before you can specify a new one.
Thepasswordispresetto“00000000”atthefactory.Once
you have entered a new password, you are asked to
confirm it by entering it again.
Privacy
Using this menu, you can lock your media contents, such
as picture messages, voice messages, voice notes, call
records, phonebook, images, sounds, music, and videos.
Once you have locked the contents, you must enter the
phone’s password to access the associated menus.
1. To select an item to lock, press the Up or Down
Navigation key. To lock all of the contents, select Phone
privacy.
2. To place a check mark, press the
key.
key.
3. To remove a check mark, press the
4. To lock the marked items, press the Save soft key.
5. Enter a password and press the OK soft key or the
key.
Note:Thepasswordispresetto“00000000”atthefactory.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
Section 8: Changing Your Settings
113
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Memory Status
You can check the amount of the memory being used and
the memory remaining for messages, File manager,
Calendar, Phonebook, and Games.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
You can also check how many names and numbers are
stored in Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
InanyoftheMemorystatusmenus,youcanpresstheLeft
or Right navigation keys to scroll through different
categories.
114
Reset Settings
Reset Settings
From this menu you can reset your phone and sound
settings to the default settings.
The following options are available:
• All: Phone, Display, and Sound settings will be returned to
default values.
• Phone settings: only phone settings will be returned to
default values.
• Display settings: only display settings will be returned to
default values.
• Sound settings: only sound settings will be returned to
default values.
To reset your settings:
1. Highlight one of the options and press the
key to
place a check mark next to the option.
2. Press the Reset soft key.
3. You will be prompted with Reset settings?. Press the
Yes soft key.
4. Enter the 4- to 8-digit password and press the OK soft
key or the
message.
key. You will receive a Reset confirmation
The password is preset to “00000000.” To change this
Section 8: Changing Your Settings
115
116
File Manager
FileManagerallowsyoutomanageyoursounds,images,
and videos in one convenient location.
Sounds
Inthismenu,youcanviewthelistofsoundsdownloaded
fromthe web serveror received in multimediamessages.
You can set a downloaded sound as the current ring tone.
The following options are available:
Get More MegaTones
UsingtheGetMoreMegaTonesoptiononthesoundslist,
you can access the web site preset by T-Mobile and
download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option on the sounds
list, you can access the web site preset by T-Mobile and
download new HiFi Ringers.
My sounds
Highlight an item in the My sounds menu and press the
Options soft key. The following options are available:
• Download new: takes you to t-zones where you can download
new sounds.
• Play: plays the sound.
• Send via: allows you to send the sound via Picture message or
Bluetooth.
• Set as: allows you to set the sound as your Ringtone, a Caller
ringtone, or an Alarm tone.
118
File Manager
• Move to Memory card: allows you to move the sound to your
TransFlash memory card.
• Copy to Memory card: allows you to copy the sound to your
TransFlash memory card.
• Delete: allows you to delete the sound or delete all sounds.
• Rename: allows you to change the name of the sound.
• Share for Bluetooth: allows the sound to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to lock the sound to protect it from
deletion.
• Properties: displays the sound name, date, format, length,
size, and protection.
Voice list
The Voice list contains your recorded audio messages.
Highlight an item in the Voice list menu and press the
Options soft key. The following options are available:
• Play: plays the audio message.
• Send via: allows you to send the audio message via Picture
message or Bluetooth.
• Set as: allows you to set the audio message as your Ringtone,
Caller ringtone, or Alarm tone.
• Move to Memory card: allows you to move the audio message
to your TransFlash memory card.
• Copy to Memory card: allows you to copy the audio message
to your TransFlash memory card.
• Delete: allows you to delete the audio message or delete all
audio messages.
• Rename: allows you to change the name of the audio message.
Section 9: Fun & Apps
119
• Share for Bluetooth: allows the audio message to be shared or
released for the use of another Bluetooth device.
• Protection: allows you to lock the audio message to protect it
from deletion.
• Properties: displays the audio message name, date, format,
length, size, and protection.
Images
Inthismenu,youcanviewthelistofimagesdownloaded
from the web server or received in messages. You can set
a downloaded image as the current background image.
The following options are available:
Get More Wallpapers
Using the Get More Wallpapers option, you can access
the web site preset by T-Mobile and download new
images.
My Album
Thismenuprovidestheabilityforyoutoviewthephotos
you have stored on the t-zone browser. Use the following
procedures to access My Album.
1. In your t-zone browser, select the My Albums Menu link
and press the Select soft key or the
key.
2. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
3. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
This menu provides the ability for you to store your
photos using the t-zone browser.
120
File Manager
My downloads
Thismenuallowsyoutoaccessyourdownloadedimages.
Scroll to the image you want to view. By pressing the
Options soft key you can access the following options:
• Download new: takes you to t-zones where you can download
new images.
• View: displays the image.
• Send via: allows you to send the image via Picture message or
Bluetooth.
• Set as: allows you to set the image as Wallpaper or as a Caller
ID.
• Move to Memory card: allows you to move the item to the
TransFlash memory card.
• Copy to Memory card: allows you to copy the item to the
TransFlash memory card.
• Delete: allows you to delete the image.
• Rename: allows you to change the name of the item.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Share for Bluetooth: allows the image to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to lock the image to protect it from
deletion.
• Properties: displays the image name, date, format, resolution,
size, quality, and protection.
Section 9: Fun & Apps
121
My photos
In this menu you can review the photos you’ve taken.
Highlight a photo and press the Options soft key to
choose from the following options:
• View: displays the photo.
• Send to My Album: sends the photo to My Album.
• Send via: allows you to send the image via Picture message or
Bluetooth.
• Default destination: allows you to remove or replace the
default destination.
• Set as: allows you to set the photo as Wallpaper or as a Caller
ID.
• Edit image: takes you to the Image editor screen where you
can add emoticons or frames to your photos or apply special
effects.
• Move to Memory card: allows you to move the photo to the
TransFlash memory card.
• Copy to Memory card: allows you to copy the photo to the
TransFlash memory card.
• Delete: allows you to delete the photo.
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your images displayed in a
Line view or in Thumbnail view.
• Slide Show: allows you to see all of your photos in a slide show
presentation.
• Share for Bluetooth: allows the photo to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to lock the image to protect it from
deletion.
122
File Manager
• Properties: displays the image name, date, format, resolution,
size, and protection.
Videos
In this menu, you can view a list of videos downloaded
from the web serveror receivedin multimediamessages.
The following options are available:
Downloaded videos
This menu allows you to access your downloaded video
clips.
Scroll to the video you want to view. By pressing the
Options soft key you can access the following options:
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Set as caller ID: allows you to set the video as a Caller ID.
• Move to Memory card: allows you to move the video to the
TransFlash memory card.
• Copy to Memory card: allows you to copy the video to the
TransFlash memory card.
• Delete: allows you to delete the video.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Share for Bluetooth: allows the video to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to lock the video to protect it from
deletion.
Section 9: Fun & Apps
123
• Properties: displays the video name, date, format, resolution,
size, length, quality, and protection.
My videos
In this menu you can review the photos you’ve taken.
Highlight a video and press the Options soft key to
choose from the following options:
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Set as caller ID: allows you to set the video as a Caller ID.
• Move to Memory card: allows you to move the video to the
TransFlash memory card.
• Copy to Memory card: allows you to copy the video to the
TransFlash memory card.
• Delete: allows you to delete the video.
• Rename: allows you to change the name of the video.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Share for Bluetooth: allows the video to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to lock the video to protect it from
deletion.
• Properties: displays the video name, date, format, resolution,
size, length, quality, and protection.
Memory card
You can check the contents of your TransFlash memory
card and see what has been saved there. Press the Up or
Down navigation keys to scroll between Images, Videos,
Music, Sounds, and Other files.
124
File Manager
This option will only appear if a TransFlash memory card
has been inserted in your phone.
Music
This options allows you to access your MP3 files in your
My Music folder. You can also access other MP3 files by
selecting the Sonic wellness option.
Other files
This option allows you to view other types of files that
you have stored on your phone. This includes Excel
spreadsheets, text files, wmf files, PowerPoint
presentations, PDFs, MHTML, JPEGs, GIFs, BMPs, and
Word documents. You can send these files by picture
messageorBluetooth.Youcanalsomoveorcopythefiles
to your memory card.
Memory card
You can check the contents of your TransFlash memory
card and see what has been saved there. Press the Up or
Down navigation keys to scroll between Images, Videos,
Music, Sounds, and Other files.
This option will only appear if a TransFlash memory card
has been inserted in your phone.
Memory status
You can check the amount of memory being used and
memory remaining for sounds, music, images, and
videos. Press the Left or Right keys to scroll between the
memory status of Fun & Apps, Images, Videos, Music,
Sounds, Other files, and Memory card.
Section 9: Fun & Apps
125
MP3 Player
The MP3 Player can be used to play files you have loaded
from your PC to your TransFlash memory card.
Note: The following characters cannot be used in the filename:
/ \ * ? “ < > : | 9
The file name is limited to 47 total characters).
1. In the Fun & Apps menu, select MP3 player and press
the Select soft key or the
key.
2. Before you select an MP3, press the Options soft key to
select from the following options:
• Add music from: allows you to add music from your Phone
or memory card.
• Open: allows you to open My playlist or Current playlist.
• Settings: allows you to set these settings; repeat, shuffle,
equalize, 3D sound, visualization, MP3 skin, and volume.
3. After you select an MP3, press the Options soft key to
select from the following options:
• Play: allows you to listen to the MP3 from your phone.
• Open: allows you to open My playlist or Current playlist.
• Send via Bluetooth: allows you to send the MP3 by
Bluetooth.
• Set as: allows you to set the MP3 as an alarm tone. MP3 files
with DRM (Digital Rights Management) can also be used as a
ringtone and a caller ringtone, while files without DRM can only
be used as an alarmtone.
• Remove from play list: removes the MP3 from your
current playlist.
126
Games
• Settings: allows you to set these settings; repeat, shuffle,
equalize, 3D sound, visualization, MP3 skin, and volume.
• Properties: allows you to view MP3 name, date, format,
bitrate, length, size, and protection.
4. Highlight the Open option and press the Select soft key
or the
5. Highlight the My playlist option and press the Select
soft key or the key.
key.
6. Four playlists are shown, each holding up to 30 MP3s.
Highlight a playlist and press the Select soft key or the
key.
7. Press the Up or Down navigation keys to highlight the
song you want to listen to and press
to play it.
8. While listening to an MP3, press the Options soft key for
the following options:
• Pause: allows you to pause the song you are listening to.
Press the
to resume the song.
• Open: allows you to open My playlist or Current playlist.
• Remove from play list: removes the MP3 from your
current playlist.
• Settings: allows you to set these settings; repeat, shuffle,
equalize, 3D sound, visualization, MP3 skin, and volume.
• Properties: allows you to view MP3 name, date, format,
bitrate, length, size, and protection.
Games
YoucandownloadMIDlets(Javaapplicationsthatrunon
mobile phones) from various sources using t-zones and
store them in your phone.
Section 9: Fun & Apps
127
When you access the Games menu, the list of default
games appears. Once you have downloaded games, they
are added to the list.
Note: Java services may not be available, depending on your service
provider.
Get more games
You can download more games from the web site preset
by your service provider using the Get more games
option.
Games List
1. Scroll to the MIDlet you want on the Games list and press
the
key.
2. The startup screen of the MIDlet will be displayed along
with game options. Use the Navigation keys to scroll
between options. Press the
key to make a selection.
Note: MIDlet game options will differ depending on the MIDlet you select.
Image Editor
Image Editor allows you to enhance your photos and
images by adding special effects, adjusting brightness,
contrastandcolor,rotatingorflipping,andaddingframes
or clip art.
To use the Image Editor, follow these steps:
1. In the Fun & Apps menu, select Image editor and press
the Select soft key or the
key.
128
Image Editor
2. The message No image loaded will appear. Press the
Options soft key.
3. Select the New image option and press the Select soft
key or the
key.
4. To choose an image to edit, select either My photos or
Take Photo and press the Select soft key or the
key.
5. After you have selected a photo or taken a new one,
press the Load soft key. You will be returned to the
Image editor screen.
6. Press the Options soft key for a list of options you can
use to edit your photo.
• New image: select another image from your My photos
folder or take another picture with your camera.
• Save: allows you to save your edited image.
• Effects: allows you to apply special effects to your image.
Choose between None, Black & White, Negative, Sepia, Blur,
Sharp, Sketch, Posterize, or Solarize.
• Adjust: allows you to adjust the brightness, contrast, and
color.
• Transform: allows you to rotate or flip your image.
• Insert: allows you to add a frame, image, or clip art to your
image.
• Set as: allows you to set your edited image as Wallpaper or
Caller ID.
• Send via: allows you to send your image in a picture
message or Bluetooth.
• Share for Bluetooth: allows the image to be shared or
released for the use of another Bluetooth device.
Section 9: Fun & Apps
129
• Undo: allows you to undo the last action you performed on
your edited image.
Organizer
The Organizer allows you to set alarms, schedule
appointments, view the calendar, create To-Do lists,
perform simple math calculations, check world time,
perform unit conversions, set a timer, and use a
stopwatch.
Alarm
This feature allows you to:
• set up to 3 alarms to ring at specified times.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake-up call: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
• Auto power: alarm rings at the specified time even if the phone
is turned off. If the option is set to Off and the phone is
switched off at the specified time, the alarm does not ring.
To set an alarm:
1. Highlight the alarm you would like to set and press the
Select soft key or the
key.
2. Highlight the Alarm option and press the Right key to set
Alarm to On.
3. Press the Down key to highlight the Alarm time option.
Enter the time you want the Alarm to sound.
130
Organizer
4. Press the Down key to highlight the AM/PM option.
Press the Left or Right key to set to AM or PM.
5. Press the Down key to highlight the Monday-Sunday
checkboxes. Press the
key to bring up a list of days.
6. Place a checkmark next to the days you want the alarm
to sound. To place or remove a check mark, press the
key. Press the OK soft key.
7. Press the Down key to highlight the Alarm tone option.
Press the
8. Press the Up or Down Navigation key to highlight an
alarm tone. Press the Select soft key or the key.
9. Press the Save soft key or the key.
10. Press the key to return to Idle mode.
key to bring up a list of alarm tones.
Note: Your phone is preset to a 12-hour format. To change the time
11. To stop the alarm when it rings, press any key.
Calendar
With the Calendar feature, you can:
• consult the calendar by month, week, or day.
• set schedules and note anniversaries
• make a To do list.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
• check your memory status.
Section 9: Fun & Apps
131
When you select the Calendar menu, the following
options are available:
Month view
When you select this option, the calendar displays the
selected month with today’s date highlighted.
At the bottom of the calendar, the following icons are
displayed along with the number of entries for each:
Schedule items
Anniversary events
To do items
Miscellaneous items
The number of entries next to each icon reflects the
number of entries for the selected day on the calendar.
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Week
view of the selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• Go to: allows you to see the Month view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date, or
delete all events for preceding dates. You can also delete all
events.
Week view
When you select this option, the calendar displays the
selected week with today’s date and time highlighted.
132
Organizer
The following options are available when you press the
Options soft key:
• View mode: allows you to select between Day view or Month
view of the selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• Go to: allows you to see the Week view with today’s date
highlighted or a specified date.
• Delete: allows you to delete all events for a selected date, or
delete all events for preceding dates. You can also delete all
events.
Day view
When you select this option, you are taken to the Day
view of the selected day with any events listed. The
following options are available when you press the
Options soft key:
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or To do event.
• View mode: allows you to select between Month view or Week
view of the selected day.
Schedule
This option allows you to write memos to a schedule.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Schedule option and press the Select soft
key or the key.
key.
3. Enter the subject in the Subject text box then press the
Down soft key.
Section 9: Fun & Apps
133
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, AM/
PM, Location, Alarm, and Alarm tone. Check the Repeat
box using the
key if you want to repeat the alarm.
5. When you are finished, press the Save soft key.
Your information is saved to the Schedule.
Anniversary
This option allows you to record Anniversaries in your
calendar. You can also set an alarm to remind you of
important anniversaries.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the Anniversary option and press the Select
soft key or the key.
key.
3. Enter the occasion in the Occasion text box then press
the Down soft key.
4. Continue to enter other information including Date,
Alarm, Alarm time, AM/PM, Alarm tone, and whether or
not to Repeat every year.
5. When you are finished, press the Save soft key.
Your Anniversary information is saved to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or
events in your calendar.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
134
Organizer
soft key or the
2. Highlight the Miscellaneous option and press the Select
soft key or the key.
key.
3. Enter the subject in the Subject text box then press the
Down soft key.
4. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, and
AM/PM.
5. When you are finished, press the Save soft key.
Your Miscellaneous information is saved to the Calendar.
To do
This feature allows you to enter a list of tasks to be done.
1. From Month, Week, or Day View, press the Options soft
key. Highlight the Create option and press the Select
soft key or the
2. Highlight the To do option and press the Select soft key
or the key.
key.
3. Enter the Item to be done in the To do text box then press
the Down soft key.
4. Continue to enter other information including Start date,
Due date, and Priority.
5. When you are finished, press the Save soft key.
Your To do list is saved to the Calendar.
Section 9: Fun & Apps
135
Editing the To do List
When you select a To do list item from the Day view, the
current contents display with a status checkbox and a
priority marker.
Iftheitemhasbeendone,acheckappearsinthecheckbox.
High priority items have a redexplanationmark,Normal
priority items have a blue explanation mark, and Low
priority items have a gray explanation mark.
1. To mark an item Done, highlight the item and press the
Options soft key.
2. Highlight the Done option and press the Select soft key
or the
key.
3. The status checkbox next to the To do item will be
checked.
4. To edit other fields in the To do item, highlight the item
and press the
key.
5. Press the Options soft key.
6. Highlight the Edit option and press the Select soft key or
the
key.
7. Edit the items you wish to change.
8. Press the Save soft key or the
key.
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
136
Organizer
2. Enter the operation for your calculation by pressing the
following navigation keys:
• Left: subtraction (-)
• Right: addition (+)
• Up: multiplication (x)
• Down: division (÷)
3. The left soft key can be used to create a decimal point and
left and right brackets.
4. Enter the next number.
5. To view the result, press the
Repeat steps 1 to 5 as many times as required.
World time
key.
Thisfeatureallowsyoutofindoutwhattimeitisanother
part of world, using the Left and Right Navigation keys.
There are two time lines available. You can set the first
setting to your home city and then use the second setting
to check other city times.
Press the Options soft key for the following options:
• Save: this allows you to save your world time settings.
• Set daylight saving time: use the
key to place a
checkmark next to the cities that you want to set daylight
savings time. Each city listed represents a time zone.
Unit conversion
The conversion menu provides the following conversion
categories:
• Currency
Section 9: Fun & Apps
137
• Length
• Weight
• Volume
• Area
• Temperature
To convert any of the above categories, do the following:
1. Scroll to the conversion feature you wish to use and
press the Select soft key or the
key.
2. Enter the quantity you want converted in the text box.
Note: To include a decimal point, press the
key.
3. Use the Up, Down, Left, and Right keys to select the
From and To units of money or measure for the quantity
you want converted.
4. Press the OK soft key or the
Timer
key.
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key
again to stop the timer.
Stopwatch
This feature allows you to use a stopwatch. Press the
keytostartthestopwatch.PresstheResetsoftkeytoerase
138
Organizer
all stopwatch times recorded. Press the key for the lap
time. You can have up to 4 lap times.
Section 9: Fun & Apps
139
140
Section 10: Camera and Camcorder
Topics Covered
• Using the Camera and Camcorder
• Take and Send
• Record Video
• My Photos
• My Videos
• My Album
• My Journal
This section explains how to use the camera and
camcorderonyourphone.Youcantakephotosandvideo
clips using the built-in camera and camcorder.
Section 10: Camera and Camcorder
141
Using the Camera and Camcorder
Using the camera/camcorder module in your phone,
you can take photos or video clips of people or events
while on the move. Additionally, you can send photos
and video clips to other people in a Picture Messaging
message or set a wallpaper or caller ID image.
Note:
Do not take photos or videos of people without their permission.
Do not take photos or videos in places where cameras are not allowed.
Do not take photos or videos in places where you may interfere with
another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
1. In Idle mode, press and Up navigation key to turn on the
camera.
You can also press the Menu soft key to access Menu
mode. Highlight Camera and press the Select soft key or
press the
2. Highlight Take and Send and press the Select soft key
or the key.
key.
142
Take and Send
3. Adjust the image by aiming the camera at the subject.
Press the Left soft key to access the camera options. For
details, see "Using Camera Options" on page 143.
You can use the keypad to quickly change the camera
options.
4. Press the
key to take the photo. Send To: My
Album? is displayed. Press the Yes soft key if you want
to send the photo to your T-Mobile My Album service.
The phone’s default destination is set to My Album. The
photo is automatically saved in My Photos in the phone.
Note: To change the default destination for your pictures, press the
Options soft key when Send To: My Album? appears on the display.
Highlight the Default destination option. You can then change your default
destination to a phone number, email address, Phonebook, My Album, My
Journal, or a Recent log.
5. To use the photo options, press the Options soft key.
6. To return to Capture mode, select Take another.
7. To return to Idle mode, press the
key.
Using Camera Options
In Capture mode, you can use various options for the
camera by pressing the Left soft key.
The following options are available:
Record video: switches from camera to camcorder.
Shooting mode: allows you to take a photo in various
modes. Once you change the mode, the corresponding
indicator appears at the top right of the display. The
following modes are available:
Section 10: Camera and Camcorder
143
• Single shot: allows you to take a photo in the normal mode.
• Multi shot: allows you to take a series of action stills. Select the
capture speed, High Speed or Normal Speed, and the number
of photos the camera will take. When you press the
camera takes photos successively.
key, the
• Mosaic shot: allows you to take several photos to combine in a
mosaic.
Effects: allows you to change the color tone or apply
special effects to the photo.
Frames: allows you to select a decorative frame. Select a
frame from the list using the Navigation keys and press
the
key to save your setting.
Timer: allows you to set a time delay before the camera
takesthephoto.Selectthelengthofdelayyouwant.When
you press
key, the camera takes the photo after the
specified time has elapsed.
Go to My Photos: takes you to your My Photos folder.
Settings: allows you to change the image settings. Select
Function or Setup.
• Function:
• Size: allows you to set the image size to either
SXGA(1280X1024), Mega(1152X864), SVGA(800X600),
VGA(640x480), QVGA(320x240), Mobile(240X320), or
Frame(240X180). The selected image size displays on the
capture screen.
• View finder: allows you to set the view finder to Full screen,
Full screen & indicator, Full screen & Guideline, or Standard
ratio.
• Scene programs: allows you to choose Normal or Night
scene.
144
Take and Send
• Metering exposure: allows you to choose between Matrix,
Center-weighted, and Spot.
• White balance: allows you to choose between Auto,
Daylight, Incandescent, Fluorescent, Cloudy, and Sunset.
• ISO: Allows you to set ISO to Auto, 100, 200, or 400. The ISO
value is a number indicating the digital camera sensors
sensitivity to light. In bright light, set the ISO value lower.
• Setup:
• Shutter sound: allows you to select a tone for the shutter
sound. Choose between 5 tones.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On
or Off.
• Default name: allows you to change the default name
assigned to your photo.
Camera short cuts: shows you how to change options
usingyourkeypadincapturemode. Thefollowing short
cuts are available:
Up and Down keys zoom in and out.
Left and Right keys adjust the image brightness.
Up volume key flips the image vertically.
Down volume key creates a mirror image.
changes from camera to camcorder or camcorder to camera.
changes the picture resolution.
Section 10: Camera and Camcorder
145
changes the camera shot mode.
changes the color tone or applies a special effect to the photo.
selects ISO settings.
selects a decorative frame.
sets a time delay.
takes you to My Photos menu.
changes capture mode to full screen.
adjusts the white balance.
Flipping the Camera Lens
You can flip the camera lens around so that you can see
yourself on the display and take a picture.
To flip the camera lens, slide the phone open and turn the
lens in the direction of the arrow.
Record Video
Your camcorder produces videos in 3GP format.
1. In Idle mode, press and Up navigation key to turn on the
146
Record Video
camera. Press the
camcorder.
key to toggle from camera to
You can also press the Menu soft key to access Menu
mode. Highlight Camera and press the Select soft key or
press the
2. Highlight Record video and press the Select soft key or
the key.
key.
3. Adjust the image by aiming the camcorder at the subject.
Press the Left soft key to access the camcorder options.
For details, see "Using Camcorder Options" on page 147.
You can use the keypad to quickly change the camcorder
options.
4. To start recording your video clip, press the
key.
5. To stop the recording, press the Right soft key. The video
clip is automatically saved in the My videos folder.
6. To delete the video clip, press the Left soft key, highlight
Delete soft key, and press the Select soft key or the
key.
To return to Idle mode, press the
To access camcorder options, press the Left soft key.
Using Camcorder Options
key.
In Capture mode, you can use various options for the
camcorder by pressing the Left soft key.
The following options are available:
Take and send: allows you to take a photo in camera
mode.
Section 10: Camera and Camcorder
147
Effects: allows you to change the color tone or apply
special effects to the video clip.
Timer:allowsyoutosetatimedelaybeforethecamcorder
takes the video clip. Select the length of delay you want.
When you press the
key, the camcorder records the
video after the specified time has elapsed.
Go to My videos: takes you to your My videos folder
where you can view your videos.
Settings: allows you to change the recording settings.
• Recording mode: allows you to change the size of your video.
Select Normal or Limit for Picture message.
• Size: allows you to set the image size to either CIF (352x288),
QVGA (320x240), QCIF(176x144), or Sub-QCIF(128x96). The
selected image size displays on the capture screen.
• View finder: allows you to set the view finder to Full screen
view, Full screen & indicator, or Standard Ratio.
• Audio Record: allows you to be able to record sounds with your
video. Set to On or Off.
• White balance: allows you to choose between Auto, Daylight,
Incandescent, Fluorescent, and Cloudy.
• Scene programs: allows you to choose Normal or Night scene.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On or
Off.
• Default name: allows you to change the default name assigned
to your video.
Camcorder short cuts: showsyou how tochange options
using your keypad in capture mode. The following short
cuts are available:
148
My Photos
Up and Down keys zoom in and out.
Left and Right keys adjust the video brightness.
Up volume key flips the image vertically.
Down volume key creates a mirror image.
changes from camera to camcorder or camcorder to camera.
changes the video resolution.
changes the shooting mode.
changes the color tone or applies a special effect to the video.
turns the audio On or Off.
changes scene program from Normal to Night scene.
sets a time delay.
takes you to My videos menu.
changes capture mode to full screen.
adjusts the white balance.
My Photos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
Section 10: Camera and Camcorder
149
3. Select My photos and press the Select soft key or the
key.
When you access this menu, your phone displays the
photos in Thumbnail mode, which shows them as small
images. Use the Navigation keys to scroll through the
photos.
4. To view the photos on the full screen, press the
To go back to Thumbnail mode, press the Back soft key
or the key.
key.
5. You can use the Left and Right navigation keys to scroll
through your photos.
Photo Album Options
In the My photos menu, press the Options soft key to use
the following options:
• View: allows you view the photo on your display.
• Send to My Album: allows you to send the photo to My Album.
• Send via: allows you to send the photo via Picture message or
Bluetooth.
• Default destination: allows you to remove or edit the default
destination.
• Set as: allows you to set the photo as your wallpaper or as a
Caller ID.
• Edit image: allows you to add emoticons or frames to your
photos or apply special effects.
• Move to Memory card: allows you to move the selected photo
or all photos to your TransFlash memory card.
• Copy to Memory card: allows you to copy the selected photo
or all photos to your TransFlash memory card.
150
My Videos
• Delete: allows you to delete the photo or delete all photos.
• Rename: allows you to change the name of the photo.
• Display mode: allows you to see your photos displayed in a
Line view or in Thumbnail view.
• Slide show: allows you to see all of your photos in a slide show
presentation.
• Share for Bluetooth: allows the photo to be shared or released
for the use of another Bluetooth device.
• Protection: allows you to protect the photo from being deleted.
• Properties: shows the properties of the photo, such as the file
name, file date, file format, image resolution, file size, and
protection status.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the My photos menu, select the photo you want to
delete and press the Options soft key. Highlight the
Delete option and press the Select soft key or the
key.
2. Highlight the Selected option and press the Select soft
key or the
3. Press the Yes soft key to confirm the deletion.
4. When you have finished, press the key.
key. Or, highlight All to delete all photos.
My Videos
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
Section 10: Camera and Camcorder
151
Select My videos and press the Select soft key or the
key.
When you access this menu, your phone displays the
video clips in Thumbnail mode, which shows them as
small images. Use the Navigation keys to scroll through
the video clips.
3. To view the video clips on the full screen, press the
key.
My videos Options
In the My videos menu, press the Options soft key to use
the following options:
• Play: allows you to play the video clip on your display.
• Send via: allows you to send the video as part of a Picture
message or Bluetooth.
• Set as caller ID: allows you to set the video as a Caller ID.
• Move to Memory card: allows you to move the video to your
TransFlash memory card.
• Copy to Memory card: allows you to copy the video (or all
videos) to your TransFlash memory card.
• Delete: allows you to delete the selected video clip or delete all
video clips.
• Rename: allows you to change the name of the video clip.
• Display mode: allows you to see your videos displayed in a
Line view or in Thumbnail view.
• Share for Bluetooth: allows the video (or all videos) to be
shared or released for the use of another Bluetooth device.
• Protection: allows you to protect the video clip from being
deleted.
152
My Album
• Properties: shows the properties of the video clip, such as the
name, date, format, resolution, size, video length, quality, and
protection status.
Deleting a Video Clip
You can delete video clips one by one or all at one time.
1. From the My videos menu, use the Up or Down
Navigation key to highlight the video you want to delete
and press the Options soft key.
2. Highlight the Delete Option, then press the Right
Navigation key.
3. Highlight Selected if you only want to delete the video
clip that you selected. Highlight All if you want to delete
all video clips.
4. Press the Select soft key or the
key.
5. Press the Yes soft key to confirm the deletion.
6. When you have finished, press the
key to return
Idle mode.
My Album
Thismenuprovidestheabilityforyoutoviewthephotos
you have stored on the t-zone website. Usethe following
procedures to access My Album.
1. In Idle mode press the Menu soft key to access the Menu
mode.
2. Highlight Camera and press the Select soft key or the
key.
Section 10: Camera and Camcorder
153
3. Select My Album and press the Select soft key or the
key. The browser is launched and the T-Mobile Web
page displays.
4. Select the My Albums Menu link and press the Select
soft key or the
5. Photos sent to this folder are stored in the Inbox Album.
Highlight the Inbox Album link and press the key.
key to view the
key.
Highlight a photo and press the
photos.
6. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
This menu provides the ability for you to store your
photos using the t-zone website.
154
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
To access t-zones, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the t-zones icon.
Press the Select soft key or the
key to enter the
menu.
The following options are available:
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage. You can also press the
key in Idle mode to launch the t-zones browser.
The content of the t-zones startup homepage depends on
yourWirelessWebserviceprovider. Toscrollthrough the
screen, use the Up and Down keys.
Togotothestartuphomepagefromanyotherscreeninthe
t-zones, use the Home option. For more information on
the t-zones menus, see "Selecting and Using Menu
Exiting the t-zones
To exit the browser at any time, simply press the
key.
Navigating the t-zones
1. To scroll through browser items, press the Up or Down
Navigation key.
156
t-zones
2. To select browser items, press the Select soft key.
3. To return to the previous page, press the Back soft key or
the key.
4. To return to the startup homepage, press the Home soft
key.
Entering Text in the t-zones
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated on the screen. The following
modes are available:
• Upper-case character mode (A): allows you to enter upper-
case English characters.
• Lower-case character mode (a): allows you to enter lower-
case English characters.
Note: You can enter symbols in upper-case or lower-case character mode
by pressing the
key.
• Number mode (1): allows you to enter numbers.
To change the text input mode, use the following
procedures:
1. Press the Right soft key one or more times.
2. To enter a space, press the
key.
3. To edit text, set the cursor to the right of the character(s)
to be corrected.
4. Press the
key as required.
5. Enter the correct character(s).
Section 11: t-zones
157
Selecting and Using Menu Options
Various menus are available when you are using t-zones
to navigate the Wireless Web.
To access the browser options menu:
1. Press the Menu soft key.
2. Or, highlight the Openwave icon at the top of the page by
pressing the Up and Down keys and press the Select
soft key or the
key.
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
• Go to URL: allows you to manually enter the URL address of a
Web page. After entering an address, press the
there directly.
key to go
• Favorites: shows the bookmarks list. You can bookmark the
current web page or access previously bookmarked pages.
• Messages: allows you to create an SMS message or check
your My messages folder.
• File manager: allows you to access Sounds, Images, Videos,
Music, Other files, Memory card, or check Memory status.
• Home: takes you back at any time to the home page of the
Wireless Web service provider.
• Back: takes you back to the previous web browser screen.
• Show URL: displays the URL address of the Web page to which
you are currently connected. It also enables you to set the
current site as the startup home page.
• Reload: reloads the current page.
158
t-zones
Favorites
This menu stores up to 10 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or
the key.
2. Enter a name for the favorite item in the Name text box
and press the Down key.
3. Enter the address in the URL text box and press the
Options soft key.
4. Highlight the Save option and press the Select soft key
or the
key.
After saving favorite items, you can access the following
options by selecting the item, then pressing the Options
soft key:
• Go: takes you to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address or you can delete all
addresses.
Or, you can select the favorite item and press the key.
Your browser will take you to the site.
Go to URL
ThismenuallowsyoutomanuallyentertheURLaddress
of a web site that you wish to access.
Section 11: t-zones
159
Clear Cache
Youcancleartheinformationstoredinthecache,whichis
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
160
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressedinunitsofwattsperkilogram(W/kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
162
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands.AlthoughtheSARisdetermined
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue.Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. Body-worn operations are
restricted to Samsung-supplied, approved, or non-
Samsung designated accessories that have no metal and
must provide at least 1.3 cm separation between the
device, including its antenna (whether extended or
retracted) and the user's body. Non-compliance with the
above restrictions may result in violation of FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 12: Health and Safety Information
163
• Head: 0.32 W/Kg.
• Body-worn: 0.52 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile,"or"PCS"phones.Thesetypesofwirelessphones
canexposetheusertomeasurableradiofrequencyenergy
(RF)becauseoftheshortdistancebetweenthephoneand
theuser'shead.TheseRFexposuresarelimitedbyFederal
Communications Commission safety guidelines that
weredevelopedwiththeadviceofFDAandotherfederal
health and safety agencies. When the phone is located at
164
Consumer Information on Wireless Phones
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produceRFexposureswellwithintheFCC'scompliance
limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
wheninthestand-bymode.WhereashighlevelsofRFcan
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RFexposureshavenotfoundanybiologicaleffects.Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch.Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
Section 12: Health and Safety Information
165
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
166
Consumer Information on Wireless Phones
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. Other studiesexposed theanimals toRF for up
Section 12: Health and Safety Information
167
to22hoursperday.Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures, since the average period of phone use in these
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
Acombinationoflaboratorystudiesandepidemiological
studies of people actually using wireless phones would
providesomeofthedatathatareneeded.Lifetimeanimal
exposure studies could be completed in a few years.
However, very large numbers of animals would be
needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide
datathatisdirectlyapplicabletohumanpopulations,but
ten or more years' follow-up may be needed to provide
answers about some health effects, such as cancer. This is
because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if
they do - may be many, many years. The interpretation of
epidemiological studies is hampered by difficulties in
168
Consumer Information on Wireless Phones
measuring actual RF exposure during day-to-day use of
wireless phones. Many factors affect this measurement,
such as the angle at which the phone is held, or which
model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld.TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
Section 12: Health and Safety Information
169
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again,thescientificdatadonotdemonstratethatwireless
phonesareharmful.ButifyouareconcernedabouttheRF
exposure from these products, you can use measures like
those described above to reduce your RF exposure from
wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers.Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
170
Consumer Information on Wireless Phones
Some groups sponsored by other national governments
have advised that children be discouraged from using
wireless phones at all. For example, the government in
theUnitedKingdomdistributedleafletscontainingsuch
arecommendationinDecember2000.Theynotedthatno
evidence exists that using a wireless phone causes brain
tumorsorotherilleffects.Theirrecommendationtolimit
wireless phone use by children was strictly
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
Section 12: Health and Safety Information
171
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks.Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone.Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
FederaltradeCommission(FTC)chargedtwocompanies
that sold devices that claimed to protect wireless phone
users from radiation with making false and
unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
anddefibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
172
Consumer Information on Wireless Phones
voluntary standard sponsored by the Institute of
ElectricalandElectronicEngineers(IEEE).Thisstandard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
Section 12: Health and Safety Information
173
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
174
Road Safety
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
Section 12: Health and Safety Information
175
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
Provided by theCellularTelecommunications& Internet
Association.
Operating Environment
Remember to follow any special regulations in force in
anyareaandalwaysswitchyourphoneoffwheneveritis
forbidden to use it, or when it may cause interference or
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder if you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
176
Using Your Phone Near Other Electronic Devices
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Hearing Aid Compatibility with Mobile Phones
When some mobile phones are used near some hearing
devices (hearing aids and cochlear implants), users may
detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, andphones alsovary inthe amount of
interference they generate.
The wireless telephone industry has developed ratings
for some of their mobile phones, to assist hearing device
usersinfindingphonesthatmaybecompatiblewiththeir
Section 12: Health and Safety Information
177
hearing devices. Not all phones have been rated. Phones
that arerated have the ratingon their box or a label on the
box.
The ratings are not guarantees. Results will vary
depending ontheuser’s hearingdevice andhearingloss.
If your hearing device happens to be vulnerable to
interference, you may not be able to use a rated phone
successfully. Trying out the phone with your hearing
device is the best way to evaluate it for your personal
needs.
M-Ratings: Phones rated M3 or M4 meet FCC
requirements and are likely to generate less interference
to hearing devices thanphones that are not labeled. M4 is
the better/higher of the two ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements
and are likely to be more usable with a hearing device’s
telecoil(“TSwitch”or “TelephoneSwitch”) than unrated
phones. T4 is the better/higher of the two ratings. (Note
that not all hearing devices have telecoils in them.)
Hearing devices may also be measured for immunity to
this type of interference. Your hearing device
manufacturer or hearing health professional may help
you find results for your hearing device. The more
immune your hearing aid is, the less likely you are to
experience interference noise from mobile phones.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
178
Potentially Explosive Environments
information. Switch your phone off in health care
facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities
may be using equipment that could be sensitive to
external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
Posted Facilities
Switchyourphoneoffinanyfacilitywherepostednotices
require you to do so.
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosiveatmosphereandobeyallsignsandinstructions.
Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas),chemicalplantsorwhereblastingoperationsarein
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
Section 12: Health and Safety Information
179
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone,operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
180
FCC Notice and Cautions
When making an emergency call, remember to give all
the necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed
to play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
Section 12: Health and Safety Information
181
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
182
Product Performance
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signalstrength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto find a signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Section 12: Health and Safety Information
183
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
inallareas.DownloadableRingTonesmaybeavailableat
an additional cost. Other conditions andrestrictions may
apply. See your service provider for additional
information.
184
Battery Standby and Talk Time
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery charge
and the type of battery and charger used. The battery can be
charged and discharged hundreds of times, but it will gradually
wear out. When the operation time (talk time and standby time)
is noticeably shorter than normal, it is time to buy a new
battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
Section 12: Health and Safety Information
185
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
186
Care and Maintenance
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligationsandallowyoutoenjoythisproductformany
years.
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving
parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
Section 12: Health and Safety Information
187
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
188
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or damaged
duetonormaluse;(d)malfunctionsresultingfromtheuse
of Product in conjunction with accessories, products, or
190
Standard Limited Warranty
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
impropertesting,operation,maintenance,installation,or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
chargedbyabatterychargernotspecifiedorapprovedby
SAMSUNG for charging the battery, (ii) any of the seals
onthebatteryarebrokenorshowevidenceoftampering,
or (iii)thebattery has been used in equipmentotherthan
the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 13: Warranty Information
191
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
ontheoriginalProductorfor90days,whicheverislonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
192
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT
OR ARISING DIRECTLY OR INDIRECTLY FROM THE
USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES, ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONOFINCIDENTALORCONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
Section 13: Warranty Information
193
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTENDTOANYONEOTHERTHANTHEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASONOFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
194
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2005SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Section 13: Warranty Information
195
Intellectual Property Statement
All Intellectual Property, as defined below, owned by or
which is otherwise the property of Samsung or its
respective suppliers relating to the SAMSUNG Phone,
including but not limited to, accessories, parts, or
software relating thereto (the "Phone System"), is
proprietary to Samsung and protected under federal
laws, state laws, and international treaty provisions.
Intellectual Property includes, but is not limited to,
inventions (patentable or unpatentable), patents, trade
secrets, copyrights, software, computer programs, and
related documentation and other works of authorship.
You may not infringe or otherwise violate the rights
securedbytheIntellectualProperty. Moreover,youagree
thatyouwillnot(andwillnotattemptto)modify,prepare
derivative works of, reverse engineer, decompile,
disassemble, or otherwise attempt to create source code
from the software. No title to or ownership in the
Intellectual Property is transferred to you. All applicable
rights of the Intellectual Property shall remain with
SAMSUNG and its suppliers.
196
Samsung Telecommunications America (STA), Inc.
Samsung Telecommunications America (STA),
Inc.
Internet Address: http://www.samsungusa.com
©2005SamsungTelecommunicationsAmerica.Samsung
is a registered trademark of Samsung Electronics
America, Inc. and its related entities.
Headquarters:
Customer Care Center:
1000 Klein St.
1301 E. Lookout Drive
Richardson, TX 75082
Tel: 972.761.7000
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Openwave® is aregisteredTrademarkofOpenwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Section 13: Warranty Information
197
198
Call Records 25
Correcting the Number 22
Ending a Call 22
Making a Call 22
Making a Call from Phone-
book 23
Index
A
Accessing a Menu Function
Redialing Last Number 22
Silent mode 28
Alert type 104
B
Call Records
All calls 25
Backlight
description 18
settings 101
Call time 28
Delete all 27
Incoming calls 27
Missed calls 26
Outgoing calls 27
Battery
charging 8
installing 8
low indicator 9
removing 6
Caller group 60
Caller ID 109
Bluetooth
About 109
Camcorder 141
recording video 146
Camera 141
Features 110
Help 111
Searching for new devices
Security modes 110
Settings 109
Turning Bluetooth On and Off
taking photos 142
Change password 113
Charging battery 8
D
Dialing a Number
Visibility 110
Phonebook 59
Broadcast Messages 91
C
SIM Card 62
Dialing display 102
Calendar 131
Call Barring 107
Call Functions 21
Adjusting the Call Volume 24
Answering a Call 24
Display
backlight 18
icons 17
DTMF 32
199
E
M
Entering Text 45
Making a Call
Phonebook 23
Changing the Text Entry
Mode 46
Menu Navigation 37
Menu Outline 39
Message settings 90
Message Tone 104
Messages 69
Using ABC Mode 47
Using Number Mode 51
Using Symbol Mode 51
Using T9 Mode 49
F
File Manager 118
Fun & Apps 117
Functions and Options 29
G
Games 127
Get More Help 19
Getting Started 5
Activating Your Phone 6
Voicemail 10
Messaging
Types of Messages 70
Missed Call
Viewing 26
MP3 player 126
Multi-Party Call 34
Dropping One Participant 35
Private Conversation 35
Setting up 34
Mute 31
H
My Name Card 64
Health and Safety Informa-
tion 161
My photos
I
accessing pictures 149
Icons, description 17
Image Editor 128
Instant Messaging 91
International Call 22
K
My videos 151
N
Network Selection 108
Network Services
Call Barring 107
Keypad Tone 104
L
Low battery indicator 9
Call Forwarding 106
Call Waiting 107
Caller ID 109
200
Network Services Settings
R
Reset settings 115
Ring Volume 103
S
Security 111
Sentbox 85
Number mode 46
O
On/off switch, phone 10
Options
During a Call 30
Putting a Call on Hold 30
Settings 95
Sound Settings 103
Organizer 130
Calculator 136
Calendar 131
Shortcuts 38
Silent mode 105
SIM card
Stopwatch 138
Timer 138
installing 6
Soft Keys 29
Speakerphone 32
Speed Dial
Setting Up Entries 59
Standard Limited Warranty
Unit Conversion 137
World time 137
Own Number 64
P
Phone
icons 17
Stopwatch 138
switching on/off 10
Phone lock 112
Phone Settings 97
Phonebook
Searching for a Number 33
Phonebook Management 65
Picture Messages 75
Storing a number
Phone’s Memory 55
SIM Card 54
Switching on/off
phone 10
Symbol mode 46
T
PIN
T9 mode 46
change 112
check 111
Templates 88
Text input mode
changing 46
Text Messages 72
Timer 138
Privacy 113
Push message
viewing in Inbox 84
201
Travel adapter 8
t-zones 156
Entering Text 157
Exiting 156
Navigating 156
U
Understanding Your Phone 13
View of Your Phone 14
Understanding Your Phone-
book 53
Finding a Phonebook Entry
Finding My Phone Number
Management 65
V
changing number 11
Voice Messages 70
Voice notes 70
W
Warranty Information 189
202
|