SGH-t619
P O R T A B L E Q u a d - B a n d
T E L E P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
WB_UVFG8_t619_080906_F3
©
2006Samsung TelecommunicationsAmerica, Inc. isaregistered
trademark of Samsung Electronics America, Inc. and its related
entities.
Printed in Korea.
GH68-11749A
Openwave® is a registered Trademark of Openwave, Inc.
RSA® is a registered Trademark RSA Security, Inc.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY
CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH
THEPRODUCT, THEPURCHASERTAKESTHEPRODUCT"AS
IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE
MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE; THE DESIGN,
CONDITION OR QUALITY OF THE PRODUCT; THE
PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP
OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING
CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS OR IMPLIED
WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT
TOTHEPRODUCT.INADDITION,SAMSUNGSHALLNOTBE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR
ARISING FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR
BENEFITS.
Table of Contents
Table of Contents
1
2
Table of Contents
3
4
Activating Your Phone
When you subscribe to a cellular network, you are
provided with a plug-in SIM card loaded with your
subscription details, such as your PIN, any optional
services available, and many others.
Installing the SIM Card
Important! The plug-in SIM card and its contacts can be easily damaged
by scratching or bending, so be careful when handling, inserting, or
removing the card.
Keep all SIM cards out of reach of small children.
If necessary, switch off the phone by holding down the
key until the power-off image displays.
1. Remove the battery cover. To do so, slide the battery
cover in the direction of the arrow.
2. Lift the battery cover away.
3. From the bottom of the phone lift and remove the battery.
6
5. (1) Place the battery so that the tabs on the end align
with the slots at the bottom of the phone. (2) Press the
battery down until it clicks into place.
6. Replace the battery cover. Make sure that the battery is
properly installed before switching on the phone.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery.
Atraveladaptercomeswithyourphoneforchargingthe
battery. Use only approved batteries and chargers. Ask
your local Samsung dealer for further details.
You can use the phone while the battery is charging, but
doing so will require additional charging time.
8
Activating Your Phone
Note: You must fully charge the battery before using your phone for the
first time. A discharged battery recharges fully in approximately 200
minutes.
1. With the battery installed, plug the connector of the
travel adapter into the jack on the bottom of the phone.
2. Plug the adapter into a standard AC wall outlet.
3. When charging is finished, unplug the adapter from the
power outlet and disconnect it from the phone.
Section 1: Getting Started
9
Note: You must unplug the adapter before you remove the battery from the
phone during charging; otherwise, the phone could be damaged.
Low Battery Indicator
When the battery is weak and only a few minutes of talk
time remain, a warning tone sounds and the “Battery
low” message repeats at regular intervals on the display.
When this happens, your phone turns off the backlight to
conserve the remaining battery power.
When the battery level becomes too low, the phone
automatically turns off.
Switching the Phone On or Off
1. Press and hold the
2. If the phone asks you to enter the phone password, enter
the password and press the OK soft key or the key.
key until the phone switches on.
The password is preset to “00000000” at the factory. For
3. If the phone asks for a PIN, enter the PIN and press the
OK soft key or the
key. For further details, see "PIN
The phone searches for your network and after finding it,
the name of your service provider appears on the lower
half of your display. Now you can make or receive calls.
Note: The display language is preset to English at the factory. To change
the language, use the Language menu. For further details, see "Language"
10
Setting Up Your Voice Mail
4. When you wish to switch off the phone, press and hold
the
key until the power-off image displays.
Setting Up Your Voice Mail
For new users, follow the instructions below to set up
voicemail:
1. In Idle mode, press and hold the
key on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and
your name.
Note: These steps may be different depending on your network.
Accessing Your Voice Mail
You can access your Voice Mail by pressing and holding
the
key on the keypad or by going to the menu. To
access Voice Mail using the menu:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Call voice mail and press the Select soft key
or the
key. Your phone dials the specified voice mail
number.
5. When connected, follow the voice prompts from the
voice mail center.
Section 1: Getting Started
11
Changing the Voice Mail Number
YourSIMcardgivesyouthedefaultservicenumberofthe
voice mail center. However, should you need to change
the number, use the following procedures:
1. In Idle mode, press the Menu soft key to access the
Menu mode.
2. Highlight Messages and press the Select soft key or the
key.
3. Highlight Voice mail and press the Select soft key or the
key.
4. Highlight Voice server number and press the Select
soft key or the
key. Highlight Voice mail and press
the Options soft key.
5. Highlight Edit and press the Select soft key or the
key. Or, you may highlight Delete to delete the number.
6. Edit the name if desired, and then press the Down
Navigation key to edit the number.
7. Press the Options soft key, highlight the Save option,
and press the Select soft key or the
key.
8. Press the key to return to Idle mode.
12
Section 2: Understanding Your Phone
Topics Covered
• Features of Your Phone
• View of Your Phone
• Keys
• Display Layout
• Get More Help
This section outlines some key features of your phone. It
also displays the screen and the icons that are displayed
when the phone is in use.
Section 2: Understanding Your Phone
13
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significantfeatures.Thefollowinglistoutlinesafewofthe
features included in your phone.
• Mega pixel Camera and Camcorder
• Bluetooth® Wireless Technology
• User friendly, menu driven access to features and options
• Instant Messaging capability
• Multimedia capability
• Fun & Apps feature provides file manager, games, camera,
alarms, calendar, calculator, world time, unit conversion, timer,
and stopwatch.
View of Your Phone
The following illustrations show the main elements of
your phone:
14
Keys
Keys
The following list correlates to the illustrations.
1. Used to listen to audio from your phone.
2.
3.
The hands-free headset jack.
Performs the functions indicated by the screen text on
the bottom line of the display.
4. When receiving an incoming call, if you press the volume
key, you can mute the ring tone.
If you press and hold the volume key, you can reject the
call.
5. Makes or answers a call.
In Idle mode, recalls the last number dialed or received
when held down.
6. In Idle mode, accesses voice mail when held down.
7. In Idle mode, if you press and hold the * key, the
VoiceSignal application is launched. In Idle mode, if you
press and hold the # key, you can turn on the Silent
Mode.
8.
The charging jack used to charge your phone’s battery
and USB cable port.
9. The microphone used during phone calls and voice note
recordings.
10. Enters numbers, letters, and some special characters.
11. Deletes characters from the display.
In Menu mode, returns you to the previous menu level.
Section 2: Understanding Your Phone
15
12. Ends a call. Also switches the phone on and off when
held down.
In Menu mode, cancels your input and returns the phone
to Idle mode.
13. In Menu mode, selects the highlighted menu options.
14. In Menu mode, scrolls through the menus and
Phonebook.
In Idle mode:
ⅷ
Down key: allows you to access your Contact list directly.
ⅷ
Up key: allows you to access the Camera or Camcorder
feature directly.
ⅷ
ⅷ
Left key: allows you to access Text messaging directly.
Right key: allows you to access Voice notes directly.
When entering text, moves the cursor to the left or right,
depending on which side you press.
15. The display shows the received signal strength, the
phone battery level, the date and time.
16
Display Layout
16. Used to take pictures when pressed. Launches the
camera/camcorder with a press.
17. The external display shows the received signal strength,
the phone battery level, the date, and the time.
18. The built-in digital camera/camcorder has video capture
capabilities.
Display Layout
The display has 4 areas:
Icons
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when a new text message has been received.
Appears when a new voice mail has been received.
Appears when a new multimedia message has been
received.
Appears when you set an alarm to ring at a specified time.
For details, see page "Alarm" on page 135.
Section 2: Understanding Your Phone
17
Appears when you are out of your service area.
Appears when a call is in progress.
Appears when the Call Forwarding feature is active. For
details, see page "Call forwarding" on page 107.
Appears when Alert type is vibration or you set the phone
to vibrate when you receive a call.
Appears when Silent Mode is active.
Appears when Mute is active.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Appears when Bluetooth wireless technology is active.
Backlight
A backlight illuminates the display and the keypad.
When you press any key, the backlight comes on. It goes
off when no keys are pressed within a given period of
time, depending on the setting in the Backlight menu.
Thedisplayturnsoffafteroneminutetoconservebattery
power.
Tospecifythelengthoftimethebacklightisactive, access
the Backlight menu.
TheOnsettingishowlongthekeypadbacklightison.The
Dim option is how much longer after the keypad
backlight goes off that the display remains lit.
1. In Idle mode, press the Menu soft key to access Menu
mode.
18
Display Layout
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Display settings option and press the
Select soft key or the key.
4. Highlight the Backlight option and press the Select soft
key or the key.
5. Highlight the On option. Use the Left or Right Navigation
key to select the time that the backlight is on. You may
choose between 15 seconds, 30 seconds, 1 minute, 3
minutes, or 10 minutes.
6. Press the Down key to take you to the Dim option. Use
the Left or Right Navigation key to select the time that
Dimming mode is on. You may choose between Off, 5
seconds, 15 seconds, 30 seconds, 1minute, or 3
minutes.
7. Press the Save soft key to save your settings.
Display
Your phone has an display on the front of the phone. It
indicates when you have an incoming call or message. It
also alerts you at a specified time when you have set an
alarm.Thebacklightturnsonandthecorrespondingicon
appears on the display.
The display shows the current time and date on a digital
clock.
Section 2: Understanding Your Phone
19
Get More Help
Get More Help is designed to show you some of the
featuresofyourphoneusingt-zones. Youcansearchhelp
files on the fly while traveling, at home or anywhere,
using help.wap.t-mobile.com.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Get More Help
icon. Press the Select soft key or the
key.
3. The Get More Help menu will display with the following
options available:
• Browse Help Topics: this option gives you a list of different
topics that you can select.
• Enter a Search: this option allows you to enter a keyword to
search on.
• About: this option offers general information about Get More
Help including concept and site design, copyright information,
and contact email address.
To access the browser options menu:
1. Press the Menu soft key.
Or
2. Highlight the Openwave icon at the top of the page by
pressing the Up and Down keys. Press the
key.
Note: The menus may vary, depending on your t-zones subscription.
For more information on browser options, see "Selecting
20
Section 3: Call Functions
Topics Covered
• Making a Call
• Adjusting the Call Volume
• Answering a Call
• Call Records
• Silent Mode
• Selecting Functions and Options
Thissectiondescribeshowtomakeoransweracall.Italso
explains the features and functionality associated with
making or answering a call. For more information on
Section 3: Call Functions
21
Making a Call
Whentheidlescreendisplays,enterthenumberyouwish
to dial and press the
key.
Note: When you activate the Auto redial option in the Extra settings menu,
the phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone, provided your call is not sent
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number
and press the
key.
Correcting the Number
1. To clear the last digit displayed, press the
key.
2. To clear any other digit in the number, press the Left or
Right key until the cursor is immediately to the right of
the digit to be cleared. Press the
enter a missing digit.
key. You can also
3. To clear the whole display, press and hold the
Ending a Call
key.
When you want to finish your call, briefly press the
key.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the caller is identified.
To recall any of these numbers:
22
Making a Call
1. If you have typed characters on the display, press the
key to return to Idle mode.
2. Press the key to display a list of the most recent
numbers used in the order you dialed or received them.
3. Use the Up and Down keys to scroll through the
numbers and highlight the number you want.
4. To view details of the number, press the
5. To dial the number, press the key.
key.
Before you dial the number, you may press the Options
soft key for the following options:
• Details: Displays details of the number including name,
number, and dates and times of calls.
• Call back: Places a call back to the number.
• Send message: Allows you to send a text message, picture
message, or Voice note to the number.
• Add to phonebook: Stores the number in your Phone
memory or your SIM card.
•
Delete: Allows you to delete the highlighted number or all call
records.
Making a Call from the Phonebook
You can store phone numbers that you use regularly in
the phone’s memory or on your SIM card. These entries
are collectively called the Phonebook.
Once you have stored a number in the Phonebook, you
candialitbypressingafewkeys.Youcanalsoassignyour
mostfrequently-usednumberstonumberkeysusingthe
Speed Dial feature.
Section 3: Call Functions
23
For further details about the Phonebook feature, see
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume,
use the Volume keys on the left side of the phone.
Pressthe keytoincreasethevolumelevelandthe key
to decrease the level.
In Idle mode, you can also adjust the ring volume using
these keys.
Answering a Call
When somebody calls you, the phone rings and displays
the incoming call image.
The caller’s phone number, or name if stored in
Phonebook, displays.
1. Press the
incoming call.
key or the Accept soft key to answer the
24
Call Records
If the Anykey answer option in the Extra Settings menu
is activated, you can press any key to answer a call
except for the
key and the Reject soft key.
Note: To reject an incoming call, press the Reject soft key or
key.
2. End the call by pressing the
key.
Note: You can answer a call while using the Phonebook or menu features.
After ending the call, the phone returns to the function screen you were
using.
Call Records
, @ .
All incoming, outgoing and missed calls are listed in the
Call Records. You can also view Call time records.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Call records
icon. Press the Select soft key or the
key to enter
the menu.
Note: You can also access the call records of incoming, outgoing, and
missed calls by pressing the key in Idle mode.
The following Call Record options are available:
All calls
This menu lets you view the 90 most recent calls you
received, dialed, and missed.
Section 3: Call Functions
25
The number or name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Note: at any time while you are in Call Records, you may use the Left or
Right Navigation key to scroll between All calls, Missed calls, Incoming
calls, and Outgoing calls.
Missed calls
This menu lets you view the 30 most recent calls you
received, but did not answer.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Viewing Missed Calls
When you are unable to answer a call for any reason, you
can find out who is calling you, if this service is available,
so that you can call the person back.
The number of calls you have missed displays on the idle
screen immediately after a call is missed.
To view a missed call immediately:
1. If the display is off, press the volume key to turn the
display on.
2. Press the View soft key.
Thenumbercorrespondingtothemostrecentmissedcall
displays, if available.
3. To scroll through the missed calls, press the Up or Down
Navigation key.
4. To call the number displayed, press the
key.
26
Call Records
5. Press the Options soft key for the following options:
• Details: Displays details of the number including name,
number, and dates and times of calls.
• Call back: Places a call back to the number.
• Send message: Allows you to send a text message, picture
message, or voice note to the number.
• Add to phonebook: Stores the number in your phone
memory or your SIM card.
• Delete: Allows you to delete the selected number or delete all
call records.
Youcanpressthe
keyatanytimetoexittheMissedCall
feature.
Incoming calls
This menu lets you view the 30 most recent calls you
received.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Outgoing calls
This menu lets you view the 30 most recent calls you
dialed.
The number and name, if already stored in your
Phonebook, displays with the number of occurrences of
each number.
Delete all
This menu allows you to delete all of the records in each
call record separately, or you can delete all of your call
records at one time.
Section 3: Call Functions
27
1. Highlight the type of calls you want to delete and press
the key to make a check mark.
2. Press the Delete soft key to delete the calls.
3. When a confirmation message displays, press the Yes
soft key or
key to confirm.
Call time
This menu lets you view the time log for calls made and
received.
Note: The actual time invoiced by your service provider may differ from
times displayed due to network features and service plan.
The following time logs are available:
• Last call time: shows the length of your last call.
• Total outgoing: shows the total length of all calls you have
made since the timer was last reset.
• Total incoming: shows the total length of all calls you have
received since the timer was last reset.
• Life time is: shows the total length of time for incoming and
outgoing calls. The length of call time must be at least 1 minute
to increment this field. This information cannot be cleared.
Note: The password is preset to “00000000” at the factory. To change this
28
Silent Mode
Silent Mode
Silent Mode is convenient when you wish to stop the
phone from making noise, in a theater for example.
In Idle mode, press and hold the
key until the “Silent
Mode On” message and the Silent Mode icon ( ) display.
In Silent Mode, instead of sounds, your phone will
vibrate.
To exit and reactivate the previous sound settings, press
and hold the
key again until “Exit Silent Mode”
message appears. The Silent Mode icon ( ) no longer
displays.
Selecting Functions and Options
Your phone offers a set of functions that allow you to
customize it. These functions are arranged in menus and
sub-menus, accessed using the two soft keys. Each menu
andsub-menuallowsyoutoviewandalterthesettingsof
a particular function.
Soft Keys
The roles of the soft keys vary depending on the function
you are currently using. The labels on the bottom line of
the display just aboveeachkeyindicatetheircurrentrole.
Section 3: Call Functions
29
Press the Right
soft key to access
the t-zones menu.
Press the Left
soft key for
Menu mode.
Selecting Options
To view the various functions and options available and
to select the one you want:
1. Press the appropriate soft key.
2. To select the function displayed or the option highlighted,
press the Select soft key or the
key.
3. To view the next function or highlight the next option on a
list, press the Down Navigation key.
4. To move back to the previous function or option on a list,
press the Up key.
5. To move back up one level in the menu structure, press
the Back soft key.
6. To exit the menu structure without changing the settings,
press the
key.
In some functions, you may be asked for a password or
PIN. Enter the code and press the OK soft key or the
key.
30
Selecting Functions and Options
When you access a list of options, your phone highlights
thecurrentlyactiveoption.If,however,thereareonlytwo
options, such as On/Off or Enable/Disable, your phone
highlights the option that is not currently active, so that
you can select it directly.
Options During a Call
Your phone provides a number of control functions that
you can use during a call.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone
off, so that the other person cannot hear you.
Example: You wish to say something to a person in the room but do not
want the person on the phone to hear you.
To switch the microphone off temporarily:
1. Press the Options soft key. Select the Mute option and
press the Select soft key or the
key. The other
person can no longer hear you. The Mute icon is
displayed.
To switch the microphone back on:
1. Press the Options soft key. Select the Unmute option
and press the Select soft key or the
key. The other
person can hear you again.
Putting a Call on Hold
You can place the current call on hold whenever you
want. You can make another call while you have a call in
progress if your network supports this service.
Section 3: Call Functions
31
To place a call on hold, simply press the Options soft key,
highlight the Hold option, then press the Select soft key
or the
key. You can reactivate the call whenever you
want, by pressing the Resume soft key.
To make a call while you have a call in progress:
1. Enter the phone number that you wish to dial or look it up
in the Contact list.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
Or:
1. Press the Options soft key and select Hold.
2. Make the second call in the normal way.
When you have an active call and a call on hold, you may
switchbetweenthetwocalls, changingtheoneonholdto
active and placing the other on hold.
Toswitchbetweenthetwocalls,simplypresstheOptions
soft key and select Swap.
The current call is placed on hold and the call on hold is
reactivatedsothatyoucancontinueconversingwiththat
person.
When you want to finish, end each call normally by
pressing the
key.
Using the Speakerphone
While on a call, you can use your Speakerphone by
following these steps:
1. Press the Spkr on soft key.
32
Selecting Functions and Options
2. To turn the Speakerphone off, press the Spkr off soft
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If
the Mute keys option is selected, your phone does not
transmittheDTMF(DualToneMulti-Frequency)tonesof
the keys, which allows you topress keys without hearing
annoying key tones during a call.
Note: To communicate with answering machines or computerized
telephone systems, the Send DTMF option must be selected.
Searching for a Number in Phonebook
You can search for a number in Phonebook during a call.
1. Press the Options soft key. Press the Down key to
highlight Phonebook press the
key.
2. Press the Down key to highlight the Contact list option
and press the Select soft key or the
key.
The Phonebook entries are listed.
3. Enter the name that you wish to find in the textbox
located above the entries. If you enter the first few letters
of the name, the Phonebook entries are listed starting
with the first entry matching your input.
Or, use the Up or Down Navigation key to highlight the
contact that you desire.
4. To view the highlighted entry, press the Options soft
key.
Section 3: Call Functions
33
5. Highlight the View option and press the Select soft key
or the key. The Contact is displayed.
For further details about the Phonebook feature, see
Call Waiting
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and
waiting" on page 109 of the Settings section for
information on how to activate Call waiting.
You are notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first
call is automatically put on hold.
2. To switch between the two calls, press the Options soft
key, highlight Swap and press the Select soft key or the
key.
Toendacallonhold,presstheOptionssoftkeyandselect
theEndheldcalloption. ThenpresstheSelect softkeyor
the
key.
To end the current call, press the
key.
Making a Multi-Party Call
Amulti-partycallisanetworkservicethatallowsuptosix
people to take part simultaneously in a multi-party or
conference call.
For further details about subscribing to this service,
contact your service provider.
34
Selecting Functions and Options
Setting up a Multi-Party Call
1. Call the first participant in the normal way.
2. Call the second participant in the normal way. The first
call is automatically put on hold.
3. To join the first participant to the multi-party call, press
the Options soft key and select Join. Press the Select
soft key or the
key.
4. To add a new person to the multi-party call, call the new
person in the normal way and then press the Options
soft key or the
the Select soft key or the
key. Select the Join option and press
key.
You can add incoming callers by answering the call and
pressing the Options soft key and selecting Join. Repeat
as required.
Having a Private Conversation With One Participant
1. Press the Options soft key and choose the Split option.
Press the Select soft key or the
key.
The list of call participants appears.
2. Highlight a person you wish to talk privately with by
pressing the Up or Down Navigation key, and press the
Select soft key or the
key.
Now you can talk only to that person. The other
participants can continue to converse with each other.
3. To return to the multi-party call, press the Options soft
key and select Join. Press the Select soft key or the
key.
Section 3: Call Functions
35
All of the multi-party call participants can now hear each
other.
Dropping One Participant
1. Press the Options soft key and choose the Split option.
Press the Select soft key or the
key.
The list of call participants appears.
2. Highlight the person you want to keep and press the
Select soft key or the key. Press the Options soft
key and highlight Remove. Press the Select soft key or
the key.
The call with the participant on hold will end, but you can
continue to talk to the other participants.
3. When you want to end the multi-party call, press the
key.
36
Menu Navigation
You can tailor the phone’s range of functions to your
needs using menus and sub-menus. Menus and sub-
menus can be accessed by scrolling using the Navigation
keys or by using the shortcuts.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Scroll using the Navigation keys to reach a main menu,
Settings for example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Security for example,
you can access them by pressing the Select soft key or
the
key after the sub-menu has been highlighted.
If the menu that you have selected contains further
options, repeat this step.
4. To scroll through the menus, press the Up or Down
Navigation keys.
5. To confirm the chosen setting, press the Select soft key,
or the
6. To return to the previous menu level, press the Back soft
key, or the key.
key.
7. To exit the menu without changing the settings, press the
key.
Using Shortcuts
Themenuitems,suchasmenus,sub-menus,andoptions,
are numbered and can be accessed quickly by using their
38
Menu Outline
shortcut numbers. For the main menus, you can access
any one of them by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Security.
Menu Outline
Thefollowinglistshowsthemenustructureandindicates
the number assigned to each option.
1
2
Voice notes
Call records
2.1 All calls
2.2 Missed calls
2.3 Incoming calls
2.4 Outgoing calls
2.5 Delete all
2.6 Call time
2.6.1
2.6.2
2.6.3
2.6.4
Last call time
Total outgoing
Total incoming
Life time is
3
t-zones
3.1 Home
3.2 Go to URL
Section 4: Menu Navigation
39
3.3 Bookmarks
3.4 Clear cache
4
IM
4.1 AIM
4.1.1
4.1.2
4.1.3
4.1.4
4.1.5
Sign on
Saved conversations
Offline conversations
Community setting
Help
4.2 ICQ
4.2.1
4.2.2
4.2.3
4.2.4
4.2.5
Connect
Saved conversations
Offline conversations
Community setting
Help
4.3 MSN Messenger
4.3.1
4.3.2
4.3.3
4.3.4
Sign in
Saved conversations
Community setting
Help
4.4 Yahoo!
4.4.1
4.4.2
4.4.3
4.4.4
4.4.5
Sign in
Saved conversations
Offline conversations
Community setting
Help
5
Messages
5.1 Create new
5.1.1
5.1.2
5.1.3
Text message
Picture message
Voice note
40
Menu Outline
5.2 Inbox
5.3 Sentbox
5.4 Outbox
5.5 Drafts
5.6 Templates
5.6.1
Text templates
5.6.2
Picture message templates
5.7 Voice mail
5.7.1
Call voice mail
5.7.2
Voice server number
5.8 Delete all
5.9 Settings
5.9.1
Text message
5.9.2
Picture message
5.10 Broadcast messages*
5.11 Memory status
6
Fun & Apps
6.1 My Files
6.1.1
6.1.2
6.1.3
6.1.4
6.1.5
Sounds
Images
Videos
Music
Memory status
6.2 Games
6.3 Music Player
6.4 Camera
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
Take and Send
Record video
My photos
My videos
My Album
Section 4: Menu Navigation
41
6.4.6
My Journal
6.5 Voice recognition
6.6 Organizer
6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
6.6.6
6.6.7
6.6.8
Alarm
Calendar
Calculator
Tip calculator
World time
Unit conversion
Timer
Stopwatch
6.7 Image editor
7
8
Get More Help
Phonebook
8.1 Add new contact
8.2 Contact list
8.3 Group
8.4 Speed dial
8.5 My namecard
8.6 Own number
8.7 FDN list
8.8 Management
8.8.1
8.8.2
8.8.3
8.8.4
8.8.5
Default saving
Copy all to
Sort by contacts
Delete all
Memory status
9
Settings
9.1 Time & Date
42
Menu Outline
9.2 Phone settings
9.2.1
9.2.2
9.2.3
9.2.4
Language
Greeting message
Extra settings
Airplane mode
9.3 Display settings
9.3.1
9.3.2
9.3.3
9.3.4
9.3.5
9.3.6
9.3.7
9.3.8
9.3.9
Wallpaper
Info display
Interior display
Brightness control
Front LCD Contrast
Backlight
Dialing display
Calendar
Show caller information
9.4 Sound settings
9.4.1
9.4.2
9.4.3
9.4.4
9.4.5
9.4.6
9.4.7
Incoming call
Keypad tone
Message tone
Power on/off
Flip tone
Silent mode
Extra tones
9.5 Bluetooth
9.5.1
9.5.2
9.5.3
9.5.4
9.5.5
9.5.6
9.5.7
Turn Bluetooth On/Off
My devices
My visibility
My phone name
Security modes
Features
Help
9.6 Network services
9.6.1
Call forwarding
9.6.2
Call barring*
Section 4: Menu Navigation
43
9.6.3
9.6.4
9.6.5
Call waiting
Network selection
Caller ID
9.7 Security
9.7.1
9.7.2
9.7.3
9.7.4
9.7.5
9.7.6
9.7.7
PIN check
Change PIN
Phone lock
Change password
Lock application
FDN mode
Change PIN2
9.8 Software update
9.9 Memory status
9.9.1
9.9.2
9.9.3
9.9.4
9.9.5
9.9.6
Shared memory
Messages
My Files
Calendar
Phonebook
Games
9.10 Reset settings
* Shows only if supported by your SIM card.
44
Section 5: Entering Text
Topics Covered
• Changing the Text Input Mode
• Using ABC Mode
• Using T9 Mode
• Using Number Mode
• Using Symbol Mode
This section outlines how to select the desired text input
mode when entering characters into your phone. This
section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes
associated with entering text.
Section 5: Entering Text
45
Changing the Text Input Mode
Whenusingyourphone,youwilloftenneedtoentertext,
suchaswhenstoringanameinyourPhonebook,creating
your personal greeting or scheduling events on your
calendar.Youcanenteralphanumericcharactersbyusing
your phone’s keypad.
Your phone has the following text input modes:
• ABC mode: this mode allows you to enter letters by pressing
the key labeled with the letter you want.
• T9 mode: this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing
can enter J, K, or L. However,
the T9 mode automatically compares the series of keystrokes
you make with an internal linguistic dictionary to determine the
most likely word, thus requiring far fewer keystrokes than the
traditional ABC mode.
• Number mode: this mode allows you to enter numbers.
• Symbol mode: this mode allows you to enter symbols, such as
punctuation marks.
When you are in a field that allows characters to be
entered, you will notice the text input mode indicator on
the display.
Example: Writing a text message.
46
Using ABC Mode
1. To change the text input mode, press the Right soft key
(
).
2. Each time you press the Right soft key, a different Text
input mode indicator will be displayed at the lower right
corner of your display.
The following options are available:
: T9 mode
: Number mode
: Symbol mode
: ABC mode
3. When the Text input mode indicator that you desire is
displayed, you may enter text in the text message box
using the selected text input mode.
Using ABC Mode
To use ABC mode, use the 2 to 9 keys to enter your text.
1. Press the key labeled with the letter you want:
Section 5: Entering Text
47
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
• To enter periods, hyphens, apostrophes, and other special
characters, press the
key. ABC mode applies grammar
rules to ensure that correct punctuation is used.
• To shift case in ABC mode, use the
key. There are 3
cases: Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the
key. Press and hold the
key to
clear the display.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right automatically,
and then select the next letter.
Keys
48
Using T9 Mode
Using T9 Mode
T9 is a predictive text input mode that allows you to key
in any character using single keystrokes. This text input
mode is based on a built-in dictionary.
To enter a word in T9 mode:
1. When you are in T9 mode, start entering a word by
pressing the 2 to 9 keys. Press each key only once for
each letter.
Section 5: Entering Text
49
Example: To enter “Hello” in T9 mode, press the 4, 3, 5, 5, and 6 keys.
The word that you are typing appears on the display. It
may change with each key that you press.
2. Enter the whole word before editing or deleting the
keystrokes.
3. When the word displays correctly, go to step 4.
If the word doesn’t display correctly, press the
key
to display alternative word choices for the keys that you
have pressed.
Example: Both “Of” and “Me” have the 6 and 3 keys. The phone displays
the most commonly used choice first.
4. Insert a space by pressing the
key and start entering
the next word.
To add a new word into the T9 dictionary:
1. After pressing the keys corresponding to the word you
want to add, press the
key to display the alternative
words.
2. When you press the
key at the last alternative word,
the display shows Spell on the bottom line. Press the
Spell soft key or the key.
3. Enter the word you want to add using ABC mode. See
4. Press the OK soft key or the
key.
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
50
Using Number Mode
Note: This feature may not be available for some languages.
• To enter periods, hyphens, or apostrophes, press the
T9 mode applies grammar rules to ensure that correct
punctuation is used.
key.
• To shift case in T9 mode, use the
key. There are 3 cases:
Initial capital, Capital lock, and Lower case.
• You can move the cursor by using the Navigation keys. To
delete letters, press the
to clear the display.
key. Press and hold the
key
Using Number Mode
Number mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you
want to enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and
punctuation marks into text. To display a list of symbols
press and hold the
key.
1. To select a symbol, press the corresponding number key.
2. To display more symbols, press the Up or Down
Navigation key.
3. To clear the symbol(s), press the
key. When the input
field is empty, this key returns the display to the previous
mode.
4. To insert the symbol(s) into your message, press the OK
soft key or the
key.
Section 5: Entering Text
51
52
Section 6: Understanding Your
Phonebook
Topics Covered
• Storing a Number in the Phone’s Memory
• Storing a Number in the SIM Card
• Finding a Phonebook Entry
• Dialing a Number from Phonebook
• Speed Dialing
• Editing a Caller Group
• Dialing a Number from SIM Card
• Copying all SIM Phonebook Entries
• Deleting all of the Phonebook Entries
• My Name Card
• Finding My Own Phone Number
• FDN List
• Management
This section explains how to use and manage your
Phonebook.Youcansavephonenumberstoyourphone’s
memory or to your SIM card.
Section 6: Understanding Your Phonebook
53
Storing a Number in the Phone’s Memory
Thedefaultforsavingphonenumberstoyourphonebook
is your phone’s memory. You can also save it to your SIM
card or you can set your default so that whenever a new
phonebook entry is created, you will be prompted to
on page 67 for information on how to change this setting.
Also, numbers that have been stored on your SIM card can
be copied to your phone’s memory.
Note: When you copy a phone number from your SIM card to your phone,
the number will appear twice in your Contact list.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Scroll to Add new contact by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Enter a first name in the Name text box. Tab to the next
text box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
5. Enter a last name in the text box.
6. Highlight a number Type by pressing the Up or Down
Navigation key, then enter a number in the text box.
54
Storing a Number in the SIM Card
The following types are available:
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Work: assigns the number entered to the Office entry.
• Fax: assigns the number entered to the Fax entry.
• Other: allows you to enter more detailed information for the
entry.
• Email: allows you to enter the email address for the contact.
• Picture ID: allows you to add a Picture ID assigned to the
contact.
• Ringtone: allows you to choose from Default melodies, Voice
list, My sounds, or Music.
• Group: allows you to assign this contact to a group.
• Notes: allows you to enter additional information about the
contact. Up to 50 characters.
7. Press the Save soft key or press the Options soft key
and highlight the Save option and press the Select soft
key or the
key. The number is saved to your phone
and the new contact information is displayed.
8. To return to the Idle screen, press the
key.
Storing a Number in the SIM Card
The default for saving phone numbers to your
phonebookisyourphone’smemory.Tostoreanumberin
your SIM card, you need to change the Default Saving
option first.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Section 6: Understanding Your Phonebook
55
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Scroll to Management by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Highlight Default saving and press the Select soft key
or the
key.
5. Highlight SIM Card and press the Select soft key or the
key.
Note: You can also set the Default saving option to Ask on saving in the
Management menu. With this option, you will be prompted for storage
location each time you add a new contact. See "Default Saving" on page
67 for more information.
Now that your phone is set up to store contacts to your
SIM card, follow this procedure to store a number.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight the Add new contact option and press the
Select soft key or the key.
4. Enter a name in the Name text box. Tab to the next text
box by pressing the Down key.
For further details about how to enter characters, see
"Using ABC Mode" on page 47.
56
Storing a Number in the SIM Card
5. Enter a number you want to store and press the Save
soft key or the
card.
key. The number is saved in your SIM
After storing, the phone displays the Phonebook entry
you just created.
6. To use the entry options before saving the number,
highlight the Name field and press the Options soft key.
The following options are available:
• Save: saves the number in the SIM card.
• Select language: allows you to select between English,
French, or Spanish.
• Cancel: cancels the Add new contact screen and returns you
to the previous menu.
7. To use the entry options after saving the number, press
the Options soft key.
The following options are available:
• Edit: allows you to edit the name and number fields in the
entry.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• Call: allows you to place a call to the selected number.
• Copy to phone: allows you to copy the number to your
Phone, SIM card or SIM card (FDN).
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Assign speed dial: allows you to set this contact to a speed
dial number (2-9).
Section 6: Understanding Your Phonebook
57
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
• Print via Bluetooth: allows you to print using a Bluetooth
device connection.
8. To return to the Idle screen, press the
key.
Finding a Phonebook Entry
You can store phone numbers and their corresponding
names in your SIM card and phone’s memories. They are
physically separate but are used as a single entity, called
Phonebook.
Depending on your particular SIM card, the maximum
number of phone numbers the SIM card can store may
differ.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight Contact list and press the Select soft key or
the key.
4. Enter the first few letters of the name in the text box.
The Phonebook entries are listed, starting with the first
entry matching your input.
5. If needed, press the Up or Down Navigation key until the
entry you want is highlighted.
58
Finding a Phonebook Entry
6. Once you have found the entry, press the
key to dial
the number, or press the Options soft key to access the
following Phonebook entry options:
• View: shows details of the Phonebook entry.
• Edit: allows you to edit the Name and number for the selected
contact.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
• New contact: takes you to the Add new contact menu.
• Call: places the call to the selected phone number.
• Copy to Phone/SIM: allows you to copy the selected
contact entry or all contact entries to the Phone or SIM card.
• Send name card via: allows you to send your name card
via Text Message, Multimedia Message, or Bluetooth device.
• Assign speed dial: allows you to assign a speed dial key
number to the selected Phonebook entry.
• Delete: allows you to delete the selected name and number
from your Phonebook or delete all numbers. You are asked to
confirm that you wish to delete the name and number by
pressing the Yes soft key. To cancel, press the No soft key.
• Select language : allows you to select between English,
French, or Spanish.
7. If you select the View option, press the Options soft key
after the contact information is displayed, for these
additional options:
• Edit: allows you to edit the name and number fields in the
entry. You can also add email address and notes.
• Send message: allows you to send a message to the
selected number. You may choose between Text messages,
Picture messages, or Voice notes.
Section 6: Understanding Your Phonebook
59
• Call: places the call to the selected phone number.
• Copy to Phone/SIM card: allows you to copy the number
to your phone, SIM card or FDN.
• Send name card via: allows you to send your name card
via Text message, Picture message, or Bluetooth.
• Assign speed dial: allows you to assign a numeric key to
the selected phone number. You can set up to 8 speed dial
entries and then dial them easily whenever you want, simply by
pressing the associated numeric key.
• Delete: allows you to delete the name and number from
Phonebook. You are asked to confirm that you wish to delete
the name and number by pressing the Yes soft key. To cancel,
press the No soft key.
• Print via Bluetooth : allows you to print the contact
information via a Bluetooth device.
Note: Memory location 1 is reserved for your Voice mail server number and
cannot be changed.
Dialing a Number from Phonebook
Once you have stored phone numbers in the Phonebook,
youcandialthemeasilyandquicklybyusingthelocation
numbers that were assigned to them in the Phonebook.
Note: If you cannot remember a location number, you must go into the
Contact list menu in the Phonebook menu to search for the entry by
name. For details, "Finding a Phonebook Entry" on page 58.
Speed Dialing
Once you have stored phone numbers from your
Phonebook list, you can set up to 8 speed dial entries and
60
Editing a Caller Group
then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys
(2 to 9), press and hold the appropriate key.
Setting Up Speed Dial Entries
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Scroll to Speed dial by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to select the number
key to which you wish to assign the speed-dialing
number. Select from the 2 to 9 keys, and press the Add
soft key.
5. Highlight a number from the list and press the Select
soft key or the
key.
6. You will receive a Saved confirmation and the Speed
dial menu will show the number assigned to the number
key you selected.
Note: Memory location 1 is reserved for your Voice mail server number and
cannot be changed.
Editing a Caller Group
1. In Idle mode, press the Menu soft key to access Menu
Section 6: Understanding Your Phonebook
61
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight the Group option and press the Select soft key
or the key.
4. Scroll through the group list by pressing the Up or Down
Navigation key.
5. Highlight the group you want and press the Options soft
key.
6. Highlight the Edit option and press the Select soft key or
the
key.
7. To edit the Caller group name, modify the text in the
Name text box.
8. To change the image associated with the Caller group,
press the Down navigation key to highlight the Picture
ID icon. Press the
key.
The following options are available:
• Take Picture: allows you to take a picture with your camera.
• My photos: allows you to choose a photo from My photos
folder.
• Downloaded images: allows you to choose a photo from
your downloaded images folder.
• Icons: allows you to choose from pre-defined icons
• Do not assign: removes any image that was previously
used and sets to Not assigned status.
62
Dialing a Number from the SIM Card
9. To change the ringtone associated with the Caller group,
press the Down key to highlight the Ringtone icon. Press
the
key.
The following options are available:
• Default melodies: allows you to choose between 20
different melodies.
• Voice list: allows you to assign a voice clip to this group.
• My sounds: allows you to choose a sound from your
Downloaded sounds folder.
• Music: allows you to set a song as a group ringtone.
10. When you are finished, press the Save soft key. Your
Caller group settings will be saved.
11. When you are finished, press the
key to return to Idle
mode.
Dialing a Number from the SIM Card
1. In Idle mode, enter the location number for the phone
number you want to dial and press the
key or the
key.
The entry associated with the location number will be
displayed.
2. If you don’t know the location number, press
and the first location number will be displayed.
You can then press the Left or Right key to find other
numbers in the list.
3. Press the Dial soft key, the
key, or the
key when
you have selected the number you want to dial.
Section 6: Understanding Your Phonebook
63
Copying all SIM Phonebook Entries
You can copy all SIM entries to the Phone using this
option. When you copy entries to the phone, duplicate
entries are created.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight Management and press the Select soft key or
the key.
4. Highlight Copy all to and press the Select soft key or the
key.
5. Highlight SIM card and press the Select soft key or the
key
6. Press the Add soft key.
Note: Options are available for phone entries that are not available when
stored to the SIM card. For details see "Storing a Number in the Phone’s
Deleting all of the Phonebook Entries
You can delete all your entries from your phone’s
memory, your SIM card, FDN, or All.
Important! Once Phonebook entries have been deleted, they cannot be
recovered.
1. In Idle mode, press the Menu soft key to access Menu
64
My Namecard
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight Management and press the Select soft key or
the key.
4. Scroll to Delete all by pressing the Up or Down
Navigation key and press the Select soft key or the
key.
5. To place a check mark by the memory location you want
to empty; All, Phone, SIM Card, or SIM card (FDN),
highlight the category and press the
key.
You can remove the check mark by pressing the
key.
6. Press the Delete soft key to delete the entries in the
selected memory location.
7. When the Delete? confirmation message appears, press
the Yes soft key or the key.
8. Enter the password and press the
key or the Back
soft key to cancel.
9. When you are finished, press the
key to return to
Idle mode.
My Namecard
MyNamecardallowsyoutocreateavirtualbusinesscard.
Once completed, you can send the card to recipients as a
V-card attachment.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Section 6: Understanding Your Phonebook
65
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight My namecard and press the Select soft key or
the key.
4. My Name Card opens with the Name field highlighted.
5. Enter information in each of the fields as desired. Use the
Navigation keys to move between fields, then use the
keypad to enter information.
6. When finished, press the Option soft key.
7. Highlight the Save option and press the Select soft key
or the
key.
Finding My Own Phone Number
Thisfunctionisamemoryaid,whichyoucanusetocheck
your own phone number if you need to do so.
You can assign a name to each of your own phone
numbers registered on your SIM card. You can also edit
the names and numbers. Any changes made here do not
in any way affect the actual subscriber numbers on your
SIM card.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
66
FDN List
3. Select the Own number option by pressing the Up or
Down Navigation key and press the Select soft key or
the key.
4. Highlight the Number 1 option and press the
key.
Your phone number is displayed. You may edit the
number and name if you wish. If you edit the name or
number, press the Save soft key or the key.
FDN List
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The FDN List allows you to set up a list of numbers that
your phone may dial.
FDN mode must first be enabled in the Security settings.
changing this setting.
ToenableFDNmode,aPIN2numberisrequired.Youcan
obtain your PIN2 from your service provider.
Management
The Management menu allows you to select where your
contacts will be saved, copy your SIM contacts to your
phone, delete your contacts, or check your memory
status.
Default Saving
The Default Saving option allows you to choose where
your contacts will be saved. The following options are
available:
Section 6: Understanding Your Phonebook
67
• Phone: new phonebook contacts will be saved to your phone.
Your phone comes with the default set to Phone memory.
• SIM card: new phonebook contacts will be saved to your SIM
card.
• Ask on saving: you will be prompted to choose between Phone
or SIM Card whenever you save a new contact.
Copy All to
ThisoptionallowsyoutocopyallcontactsfromyourSIM
card to your Phone or from you Phone to your SIM card.
For more information, see "Copying all SIM Phonebook
Sort by contacts
TheSortbycontactsmenuoptionallowsyoutosetthesort
functiontoalphabetizethecontactsbyFirstnameorLast
name.
Delete All
Important! Once contact entries have been deleted, they cannot be
recovered.
This option allows you to delete your contacts. You may
delete from SIM, Phone memory, FDN, or All. For more
information, see "Deleting all of the Phonebook Entries"
Memory Status
You can check how many names and numbers are stored
in the Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
1. In Idle mode, press the Menu soft key to access Menu
68
Management
mode.
2. Using the Navigation keys, scroll to the Phonebook icon.
Press the Select soft key or the
key to enter your
Phonebook.
3. Highlight Management and press the Select soft key or
the key.
4. Select the Memory status option by pressing the Up or
Down Navigation key and press the Select soft key or
the
key.
5. When you are finished, press the
key or the Back
soft key.
Section 6: Understanding Your Phonebook
69
70
Section 7: Messages
Topics Covered
• Voice Notes
• Text Messages
• Picture Messages
• Inbox
• Sentbox
• Outbox
• Drafts
• Templates
• Voice mail
• Delete All
• Settings
• Broadcast Messages
• Instant Messaging
• Memory Status
This section describes how to send or receive different
types of messages. It also explains the features and
functionality associated with messaging.
Section 7: Messages
71
Types of Messages
Your phone provides the following message types:
• Voice Notes
• Text Messages
• Picture Messages
• Voice Mail
• Broadcast Messages (SIM Dependent)
• Instant Messaging
Voice Notes
In this menu, you can record a voice note of up to one
minute long and then immediately send it by a Picture
Messaging message.
Whenyouaccessthismenu,atimerappearsonthescreen.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Voice notes icon.
Press the Select soft key or the
key to enter the
menu.
3. Press the Record soft key to start recording.
4. Record a memo by speaking into the microphone.
The display shows the elapsed time and the remaining
time at one time.
5. When you are finished, press the Stop soft key. Or, when
the recording time is expired, the display switches to the
next screen.
6. Press the Options soft key for the following options:
72
Voice Notes
• Send to: allows you to send the Voice note.
• Play: plays back your Voice note.
• Re-record: discards the Voice note and enables you to
record another one.
• Set default destination: allows you to remove or edit the
default destination.
• Save: saves the Voice note and continues to the Send option.
7. To send the Voice note, press the Send soft key or select
the Send to option in the Options menu.
8. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an
address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• New recipient: allows you to enter a phone number.
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
9. Highlight the selection and press the
key to mark the
selection. Press the Add soft key.
10. The number you selected will be entered in the To text
box.
11. If you selected more than one recipient, press the
Options soft key for the following options:
• Add recipients: allows you to add additional recipients to
this voice note.
• Change recipient: allows you to select To , Cc or Bcc
additional numbers.
12. Press the
Send key.
Section 7: Messages
73
Your phone sends the message. After sending, the
message is saved in the Sentbox.
Text Messages
Short Message Service (SMS) allows you to send and
receive short text messages to and from other mobile
phones. In addition, your phone supports the Enhanced
Messaging Service (EMS), which enables you to include
simple graphics, melodies, and animated images in your
messages. To use this feature, you must subscribe to your
service provider’s message service.
When the Message icon ( ) appears, you have received
anewtextmessage.Whenthememoryisfull,themessage
icon will flash on your phone and you cannot receive any
newmessages. Youmustdeleteamessagebeforeyoucan
receive additional messages.
Use the Delete option in each message box to delete
obsolete messages.
Create new
In this menu, you can write and send a text message.
Creating a Simple Text Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Create new option and press the Select
soft key or the key.
74
Text Messages
4. Highlight the Text Message option and press the Select
soft key or the
key.
5. Create your message.
Notes: For further details about entering characters, see "Using ABC
Mode" on page 47.
You can enter up to 160 standard Alphabet characters per page in your
message. The message can be up to 12 pages long for a total of 1920
characters.
6. When you finish entering your message, press the
Options soft key. The following options are available:
• Insert from: allows you to insert from the Text template,
Phonebook, or Bookmarks. The Text messages template allows
you to apply one of the preset message templates to the text.
Select one of the 10 items stored in the Text messages
template menu. Phonebook allows you to add names and
phone numbers to your message. Favorites allows you to add
internet addresses to your message.
• Add content: allows you to add a picture, animation, or
melody to your message.
• Attach: allows you to attach a Name card, Schedule,
Anniversary item, Miscellaneous item, or Tasks to your
message.
• Save to Drafts: save the message to your Phone or SIM
card.
• Select language: allows you to set the language to
English, French, or Spanish.
• Text style: allows you to format the style of the text.
For the Text size, Large, Medium, and Small size are available.
Text mode options are Normal, Underline, and Strikethrough.
The options for Bold and Italic are set by using the
key to
Section 7: Messages
75
place a checkmark by them. Alignment options are Left,
Center, and Right.
• Back: allows you save to your draft folder without sending.
7. Select the Send
key.
8. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an
address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• New recipient: allows you to enter a phone number.
9. The number you selected will be entered in the To text
box. Press the Options soft key for the following options:
• Recent recipients: allows you to select from recipients of
your previous messages.
• Phonebook: allows you to enter the phone number you want
from your phonebook.
• New recipient: allows you to enter a phone number.
• Group: allows you to send the text message to an entire
group such as family or friends.
• FDN list: allows you to enter a contact from your FDN list.
10. When you have finished entering the destinations, Press
the
Send key to send the message.
Picture Messages
This menu allows you to use the Multimedia Message
Service.
Picture Messaging is a messaging service that provides
deliveryofpersonalmultimediamessagesfromphoneto
phone or from phone to e-mail.
76
Picture Messages
In addition to the familiar text content of text messages,
multimedia messages can contain images, graphics,
voice, and audio clips. A Picture Messaging message is a
multimedia presentation in a single file. It is not a text file
with attachments.
When the Message icon ( ) appears, you have received
a new picture message.
Using the Picture Messaging feature, your phone can
receive and send messages that contain multimedia files,
suchasphotos,soundsandimagesyoudownloadedfrom
the Internet and voice notes you recorded. This function
is available only if it is supported by your service
provider. Only phones that offer multimedia messaging
features can receive and display multimedia messages.
Create new
This menu allows you to create a new multimedia
message and send to one or multiple destinations.
Creating and Sending a Multimedia Message
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Create new option and press the Select
soft key or the key.
4. Highlight the Picture message option and press the
Select soft key or the key.
5. Highlight Subject and press the
key.
Section 7: Messages
77
6. Enter the subject of your message and press the
key.
Note: For more information about entering characters, see "Using ABC
Mode" on page 47.
7. To add a picture or video clip, highlight the Image &
Video option and press the
8. Highlight one of the following options and press the
Select soft key or the key.
key.
• Take picture: launches the camera for you to take a picture.
• My downloads: allows you to select a downloaded image to
send in the picture message.
• My photos: allows you to select a picture from your Images
folder.
• Record video: launches the video camcorder to record a
video.
• Downloaded videos: allows you to select from a
downloaded video to send in the picture message.
• My videos: allows you to select a video clip from your
Images folder.
9. Select an image or video and press the Options soft key.
Highlight the Add option and press the Select soft key or
the
key to add it to your message.
10. To add a sound, highlight the Sound option and press the
key.
Note: if you attached a video clip to your message, you will not be able to
add audio to the message.
78
Picture Messages
11. Highlight one of the following options and press the
Select soft key or the key.
• Record audio: allows you to record a new voice message.
• My sounds: allows you to select a sound from your Sounds
folder.
• Voice list: takes you to the Recorded audio folder to select a
voice memo to add.
12. Select a Sound or Voice memo and press the Options
soft key.
13. Highlight the Add option and press the Select soft key
or the
14. To add a message, highlight Text and press the
15. Enter your message and press the key.
key to add the sound to your message.
key.
16. To change the Subject or Message, select a category and
press the Options soft key. Highlight Edit to edit the
item.
17. To change the image or sound with another one, select a
category and press the Options soft key. Depending on
the category selected, highlight Change to remove or
replace the item.
18. When you have finished creating the message, press the
the Send soft key.
19. Highlight one of the following send options:
• Recent recipients: allows you to select a number or an
address from the last 20 destinations you entered.
• Phonebook: allows you to enter the phone number you
want from your phonebook.
• New recipient: allows you to enter a phone number.
Section 7: Messages
79
• My Album: allows you to send the message to My Album.
• My Journal: allows you to send the message to My Journal.
20. The number or address you selected will be entered in
the To text box.
21. If you selected more than one recipient, press the
Options soft key for the following options:
• Recent recipients: allows you to select from recipients of
your previous messages.
• Add recipients: allows you to add additional recipients to
this message.
• Change recipient: allows you to change the To, Cc, or Bcc
additional numbers.
22. Press the Send
key. Your phone sends the message.
Inbox
The Inbox stores messages that you have received. You
can tell what kind of message it is by the icon displayed.
If the icon envelope is open then the message has been
read, otherwise it will appear closed.
The following types of messages may appear in your
inbox:
Voice notes
Text messages
Multimedia messages
Push messages
When you enter the Inbox, the list of messages displays
with the sender’s phone numbers, or names, if available
80
Inbox
in your Phonebook. After you have read themessage, the
envelope in the icon will appear opened.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Inbox option and press the Select soft key
or the key.
Viewing a Text Message in Inbox
1. Select a text message from the list and press the
Options soft key.
The following options will appear:
• Reply via: allows you to send a reply to the sender by
sending a text or picture message.
• Call back: Places a call back to the number.
• Forward: allows you to forward the text message to another
person.
• Delete: deletes the selected text message or all messages.
• Move to phone: allows you to move the message from the
SIM card to the phone’s memory. This option is only available
for messages stored in the SIM card.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to protect the message from being deleted.
Section 7: Messages
81
2. Press the View
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While reading a text message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by sending a
text or picture message.
• Call back: places a call back to the number.
• Forward: allows you to forward the message to another
number.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Delete: allows you to delete the message.
• Print via Bluethooth: allows you to print the message using a
Bluetooth device.
• Move to phone: allows you to move the message from the SIM
card to the phone’s memory. This option is displayed only when
the message is stored in the SIM card.
• Move to SIM card: allows you to move the message from the
phone’s memory to the SIM card. This option is displayed only
when the message is stored in the phone’s memory.
• Lock: allows you to protect the message from being deleted.
Viewing a Picture Message in Inbox
1. Select a picture message from the list and press the
Options soft key.
The following options will appear:
• Reply via : allows you to send a reply to the sender by
sending a Picture message, Text message, or Voice note.
82
Inbox
• Reply all via: allows you to send a reply to the sender by
sending a Picture message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another
number.
• Delete: deletes the selected text message or all messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to protect the message from being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
2. Highlight the View option and press the Select soft key
or the
key to read the message contents.
3. To scroll through the contents, press the Up or Down
Navigation key.
While viewing a picture message, you may choose the
following options by pressing the Options soft key:
• Reply via : allows you to send a reply to the sender by sending
a Picture message, Text message, or Voice note.
• Reply all via: allows you to send a reply to the sender by
sending a Picture message or Voice note.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to review the picture message.
• Delete: deletes the selected text message or all messages.
Section 7: Messages
83
• Save address: allows you to cut and paste the address to send
a text msg, or picture msg.
• Save media: allows you to save message media to your Image
& Video folder, Sound folder, vCard, or vCalendar.
• Lock: allows you to protect the message from being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
Viewing a Voice Note in Inbox
1. Select a Voice Note from the list and press the Options
soft key.
The following options will appear:
• Reply via: allows you to send a reply to the sender by
sending a Voice note, Text message, or Picture message.
• Reply all via allows you to send a reply to the sender by
sending a Voice note or Picture message.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another
number.
• Delete: allows you delete the selected or all voice notes
saved.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to protect the message from being deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
84
Inbox
2. Highlight the View option and press the Select soft key
or the key to listen to the message contents.
While listening to the message, you may choose the
following options by pressing the Options soft key:
• Reply via: allows you to send a reply to the sender by
sending a Voice note, Text message, or Picture message.
• Reply all via allows you to send a reply to the sender by
sending a Voice note or Picture message.
• Call back: allows you to call the sender back.
• Forward: allows you to forward the message to another
number.
• Replay: allows you to replay the voice note.
• Delete: allows you to delete the selected message or all
messages.
• Save address: allows you to cut and paste the address to
send a text msg, or picture msg.
• Save media: allows you to save message media to your
Image & Video folder, Sound folder, vCard, or vCalendar.
• Lock/Unlock: allows you to protect the message from being
deleted.
• Properties: shows you information about the message, such
as time and date the message was received, the sender’s e-
mail address or phone number, recipient’s e-mail address or
phone number, Cc, message size, priority, and class.
Viewing a Push Message in Inbox
A Push message is a way of delivering content (e.g.
images, ringtones, etc.) to mobile phones that are WAP
enabled.WithaPushmessageyoudon'tactuallysendthe
content in the text message, you direct the mobile phone
where to get it from.
Section 7: Messages
85
1. Select a Push message from the list and press the
Options soft key.
The following options will appear:
• Delete: allows you to delete the selected message or all
messages.
• Sort by: allows you to sort messages by Read/Unread, Date,
Name, Type, Size, or Subject.
• Lock: allows you to protect the message from being deleted.
2. Highlight the View option and press the Select soft key
or the
key to listen to the message contents.
While reading the message, you may choose the
following options by pressing the Options soft key:
• Go to URL: allows you to go to the website on your WAP
browser.
• Save address: allows you to extract the sender’s number and
URL, e-mail addresses or phone numbers from the message
text, so that you can save them in your phone’s memory.
• Delete: allows you to delete the message.
• Lock: allows you to protect the message from being deleted.
Viewing a Message When You Receive It
When a new multimedia message comes in, the display
shows the Picture Messaging Message icon.
1. Press the View soft key to view the message.
Press the Exit soft key if you want to view the message
later in the Inbox.
2. Press the Options soft key or the
key to access the
key.
various options described above.
3. When you are finished, press the
86
Sentbox
Sentbox
This message box stores messages that you have sent.
When you enter this menu, the list of messages in the box
displays with the recipients’ phone numbers or names, if
available in your Phonebook.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Sentbox option and press the Select soft
key or the key.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
4. Select a message from the list and press the View
key to view the message contents.
While reading a message, you can choose different
options by pressing the Options soft key.
Outbox
This message box stores messages that you have
attempted to send but have not actually been sent yet.
Whenyouenterthismenu, thelist of messages in the box
displayswiththerecipients’phonenumbersornames, if
available in your Phonebook.
1. In Idle mode, press the Menu soft key to access Menu
mode.
Section 7: Messages
87
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Outbox option and press the Select soft
key or the key.
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
4. Select a message from the list and press the View
key to view the message contents.
5. To scroll through the contents, press the Up or Down
Navigation key.
While reading a message, you can choose different
options by pressing the Options soft key.
Drafts
This message box stores messages that you may want to
edit or send at a later time.
When you enter this menu, the list of messages in the box
displays.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Drafts option and press the Select soft key
or the key.
88
Templates
Note: By pressing the Left or Right Navigation keys, you may scroll
between Inbox, Sentbox, Outbox, and Drafts.
4. Select a message from the list and press the Options
soft key.
5. Highlight the Edit option and press the Select soft key or
the
key to edit the message contents.
6. Press the Send
key to send the message.
While viewing a draft message, you can choose different
options, depending on the type of message, by pressing
the Options soft key.
Templates
Besidesenteringmessagetextusingthekeypadkeys,you
can speed message composition by including copies of
stored text (Templates) in your message.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Templates option and press the Select soft
key or the key.
4. If you want templates for a text message, highlight the
Text templates option and press the Select soft key or
the
key.
You can choose from ten predefined sentences that you
can add to your text message to save time.
Section 7: Messages
89
5. If you want templates for a picture message, highlight
the Picture messages templates option and press the
Select soft key or the
key.
You can choose between twelve different picture
message formats. You can then edit the parts that you
choose.
Voice Mail
This menu provides you with a way of accessing your
voice mailbox, if provided by your network.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Messages icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight the Voice mail option and press the Select soft
key or the key.
The following options are available:
• Call voice mail: before using the Voice Mail feature, you must
enter the voice server number obtained from your service
provider. You can then select this option and press the Select
soft key or the
key to listen to your messages. You can also
connect to the voice server by pressing and holding the
key in Idle mode.
• Voice server number: allows you to change the voice mail
server number, if necessary.
Note: Voice mail is a network feature. Please contact your service provider
for further details.
90
Delete all
Delete all
Thismenuallowsyoutodeleteallofthemessagesineach
message box. Or, you can also delete all of your messages
in all message boxes at one time.
Important! Once messages have been deleted, they cannot be recovered.
1. To select a message box to clear, press the Up or Down
Navigation key. To delete all of your messages, select the
All messages option.
2. To place or remove a check mark, press the
key.
3. Press the Delete soft key to delete the marked objects.
4. After you receive the Delete? confirmation, press the
Yes soft key or press the No soft key.
Settings
In this menu, you can setup default textmessage, picture
message, and push message information. Thelast setting
you accessed is automatically activated for sending
subsequent messages.
Text message
• Service center: allows you to store or change the number of
your message center, which is required when sending
messages. You must obtain this number from your service
provider.
• Destination address: allows you to enter a number that you
would like to send all messages to. You can still message
others, but this number will always appear in the Send list.
Section 7: Messages
91
• Validity period: allows you to set the length of time your text
messages are stored at the message center while attempts are
made to deliver them.
• Reply path: allows the recipient of your message to send you a
reply message using your message center, if your network
supports this service.
• Delivery report: allows you to activate or deactivate the report
function. When this function is activated, the network informs
you whether or not your message has been delivered.
Picture message
The following options are used to set Send and Receive
settings for Picture messages.
Send Settings
• Delivery report: when this option is enabled, the network
informs you whether or not your message has been delivered.
• Read reply: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Priority: you can select the priority level of your messages.
• Expiry date: set the length of time your messages are stored in
the message center while the network attempts to deliver
them.
• Delivery after: you can set a delay time before the phone sends
your messages.
Receive Settings
• Anonymous reject: you can set your phone to automatically
reject anonymous messages.
• Ads allowed: you can set your phone to automatically receive
advertising messages.
• Report allowed: you can set the option to receive a delivery
report.
92
Broadcast Messages (SIM Dependent)
Broadcast Messages (SIM Dependent)
This network service allows you to receive text messages
on various topics, such as the weather or traffic.
Please contact your service provider for further details.
Instant Messaging
Instant Messaging is a way of sending short, simple
messages that are delivered immediately to users online
at that moment.
Before using this feature, you need to subscribe to a
messenger service. For further details, contact your
service provider. Your handset has 4 pre-loaded
Messaging services (AIM, ICQ, MSN Messenger, and
Yahoo!).
Starting your Instant Messaging
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the IM icon. Press
the Select soft key or the
key to enter the menu.
3. Highlight the messenger service to which you subscribed
using the Up or Down Navigation key and press the
Select soft key or the
key.
4. Highlight the Sign on, Connect, or Sign in option,
depending on your messenger service and press the
Select soft key or the
key.
5. Enter the required sign on information such as ID and
password and press the OK soft key.
Section 7: Messages
93
Note: The information required for sign on will vary depending on the
Instant Messaging provider you are using.
6. Follow the on-screen instructions to read, reply to,
compose, send, and manage your Instant Messaging
account.
Using the Instant Messenger Options
After selecting an Instant Messaging service, the
following options appear:
• Sign on/Connect/Sign in: allows you to login to your Instant
Messaging account.
• Saved conversations: shows permanent records of your
Instant Messaging conversations.
• Offline conversations: shows dynamic records of your last 10
Instant Messaging conversations.
• Community setting: allows you to change your Community
settings.
• Help: provides help information on Service provider, Sign up,
Connect, Contact list, Sending IMs, Receiving IMs, Privacy, and
Away.
Memory Status
You can check the amount of the memory being used and
the memory remaining for multimedia messages.
The display shows the total space including the used and
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
94
Section 8: Changing Your Settings
Topics Covered
• Time & Date Settings
• Phone Settings
• Display Settings
• Sound Settings
• Network Services
• Bluetooth
• Security
• Software Updated
• Memory Status
• Reset Settings
This section explains the sound and phone settings for
yourphone.Itincludesdisplaysettings,securitysettings,
and extra settings associated with your phone.
Section 8: Changing Your Settings
95
Time & Date Settings
Thismenuallowsyoutochangethecurrenttimeanddate
displayed.
The following options are available:
• Set time: allows you to change the hour and minute.
• AM/PM: allows you to set either AM or PM.
• Time format: allows you to select whether your time is
displayed in 12 hour or 24 hour format.
• Set date: allows you to enter the month, day, and year.
• Date format: allows you to select MM/DD/YYYY, DD/MM/YYYY,
or YYYY/MM/DD format.
• Week start day: allows you to select the day of the week you
wish to set as a start day. Choose from Sunday or Monday.
• Auto update: allows you to receive time information from your
service provider’s network.
• On: the phone automatically updates the time and date
according to the current time zone using the network
service.
• Confirm first: the phone asks for a confirmation before the
update.
• Off: you need to manually set the time and date according to
the current time zone using the Set time menu.
To change your time and date settings:
1. Use the Up or Down Navigation key to select the option
you wish to change.
2. To Set time or Set date, use the Left or Right key to
position the cursor over the number you wish to change.
3. Enter the desired number.
96
Phone Settings
4. To change other options, use the Left or Right key to
select the desired setting.
5. When you are finished changing your settings, press the
Save soft key to save your settings. Otherwise press the
Back soft key.
Note: Automatic updates of time and date do not change the time you
have set for alarm settings or calendar memos.
Phone Settings
You can customize various phone settings.
Language
ThismenuallowsyoutoselectadisplaylanguageforText
language and Input mode. Choose from English, French,
and Spanish.
Greeting message
This menu allows you to set a greeting to be displayed
briefly when the phone is switched on.
For details about entering characters, see "Section 5:
Extra settings
You can turn the automatic redialing or answering
features on or off.
1. To turn a feature on, highlight the feature and press the
key. A check mark displays in front of the option.
2. To turn a feature off, highlight the checked feature and
press the
key. The check mark no longer displays.
Section 8: Changing Your Settings
97
The following options are available:
• Auto redial: when this option is checked, the phone makes up
to ten attempts to redial a phone number after an unsuccessful
call.
Note: The interval between call attempts varies.
• Anykey answer: when this option is checked, you can answer
an incoming call by pressing any key, except the
key or the
Reject soft key. To reject the call, press the
key or the
Reject soft key. When this option is unchecked, you must press
the
key or Accept soft key to answer a call.
• Open to answer: when this option is checked, you can simply
open the phone to answer a call. When it is unchecked, you
must open the phone and press a key to answer a call,
depending on the setting of the Anykey answer option. See
below.
3. When you have finished changing your settings, press
the Save soft key to save your settings. Otherwise press
the Back soft key.
Airplane mode
Airplane Mode allows you to use many of your phone’s
features, such as Games, Music, Notepad, Voice Memos,
etc.,whenyouareinanairplaneorinanyotherareawhere
makingorreceivingcallsordataisprohibited.Whenyour
phone is in Airplane Mode, it cannot send or receive any
calls or access online information.
1. To turn a feature on, highlight the feature and press the
Select soft key or the
key.
2. Highlight On or Off and press the Save soft key.
98
Display Settings
Display Settings
In this menu, you can change various settings for the
display or backlight.
Wallpaper
This menu allows you to change the background image
to be displayed in Idle mode.
The following options are available:
• Get more wallpaper: allows you to download additional
wallpapers from t-zones.
• Default wallpapers: allows you to choose from a list of
wallpapers included with your phone.
• My downloads: allows you to choose a photo from your
downloaded images folder.
• My photos: allows you to choose a photo from My photos
folder.
To change the background image:
1. Scroll through the list by pressing the Navigation keys.
2. Make a selection and press the Save soft key or the
key. Your wallpaper will be updated.
Info display
This menu allows you to set text style and text color. Press
the Left or Right Navigation key to change the settings.
Interior display
Youcanselectthecolorofthemenusdisplayed. Thereare
two different patterns (Black or White) from which to
choose.
Section 8: Changing Your Settings
99
Brightness control
You can adjust the display brightness to see it better in
different lighting conditions. Use the Left or Right
Navigation keys to change your settings. Press the Save
softkeytosaveyoursetting,ortheBacksoftkeytocancel.
Front LCD Contrast
YoucanadjustthedisplaybrightnessontheFrontLCDby
toseeiteasierindifferentlightingconditions.UsetheLeft
or Right Navigation keys to change your settings. Press
the Save soft key to save your setting, or the Back soft key
to cancel.
Backlight
In this menu, you can select the length of time that the
keypad backlight is on and how much longer the display
is illuminated before going off.
TheOnsettingishowlongthekeypadbacklightison.You
can select 15 seconds, 30 seconds, 1 minute, 3 minutes, or
10 minutes.
The Dim option is how much longer after the keypad
backlight goes off that the display remains lit. You can
select Off, 5 seconds, 15 seconds, 30 seconds, 1 minute, or
3 minutes.
For example, if you set On for 30 seconds and Dim for 5
seconds, after30secondsthebacklightonthekeyswould
turn off and 5 seconds later the display light would turn
off.
Press the Left or Right Navigation key to adjust the
settings.
100
Display Settings
Dialing display
This menu allows you to select the size and color of your
dialing font and the background color.
To change the size of the font:
1. Highlight the Font size option and press the Select soft
key or the
key.
2. Use the Left or Right key to select between Large,
Medium, or Small.
3. Press the Save soft key or the
change. Otherwise, press the Back soft key.
To change the color of the font:
1. Highlight the Font color option and press the Select soft
key or the key.
key to save your
2. Use the Left or Right key to select either Basic (black),
Rainbow, Monochrome or Gradation. If you select
Monochrome or Gradation, you can select another option
by using the Down Navigation key.
3. Choose from 15 different options.
4. Press the Save soft key or the
key to save your
change. Otherwise, press the Back soft key or the
key..
To change the background color:
1. Highlight the Background color option and press the
Select soft key or the key.
2. Use the Left or Right key to select between 20 different
colors or None.
Section 8: Changing Your Settings
101
3. Press the Save soft key or the
key to save your
change. Otherwise, press the Back soft key.
Calendar
This option allows you to enable or disable the calendar
display for your backgroud wallpaper.
Show caller information
By turning this option on, when you miss a call, caller
information such as name will be displayed on your
display when your missed calls are listed.
Sound Settings
You can customize various sound settings.
Incoming call
Note: When downloading MegaTones® or HiFi Ringers TM, charges may
apply.
Get More mega tones
Using the Get more mega tones option on the sounds
list, you can access the web site preset by T-Mobile and
download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option on the sounds
list, you can access the web site preset by T-Mobile and
download new HiFi Ringers.
Ring tone
This menu allows you to select a ring melody. Highlight
Ring tone and press the
key. Use the Upor Downkey
102
Sound Settings
to highlight a ring tone or press the Left or Right key to
choose between Downloaded Melodies or Downloaded
sounds. Press the Select soft key or the
key.
Volume
This menuallowsyouto adjust thering volumetoone of
5 levels.
Use the Right or Left key to increase or decrease the
volume.
Alert type
This menu allows you to specify how you are to be
informed of incoming calls. Use the Right or Left key to
select a Ring tone type.
The following options are available:
• Melody: the phone rings using the ring melody selected in the
Ringtone menu.
• Vibration: the phone vibrates but does not ring.
• Vibration then melody: the phone vibrates 3 times and then
starts ringing.
Keypad tone
This menu allows you to select the key tone and volume
that the phone sounds when you press a key.
Use the Right or Left Navigation keys to make your
selections.
To turn off the sound, select Off.
You can ajdust the volume with the Right or Left
Navigation keys.
Section 8: Changing Your Settings
103
Message tone
This menu allows you to set up the ringer for incoming
messages. You can set the Tone, Alert type, and
Repetition.
Use the Up or Down Navigation keys to make your
selections.
Power on/off
Thismenuallowsyoutoselectthemelodythatthephone
sounds when it is switched on and off.
To turn off the sound, select Off.
Flip tone
This menu allows you to choose from four tones, or Off
when opening the folder of your phone.
Silent mode
Thismenuallowsyoutoselectwhetherornotyourphone
willvibratewhileinquietmode.Youmaychoosebetween
Vibration and Mute.
Extra tones
You can customize additional tones for the phone.
1. To turn a given tone on, press the
key. A check mark
displays in front of the option. Press the Save soft key to
save the setting.
2. To turn a given tone off, press the
key. The check
mark no longer displays in front of the option. Press the
Save soft key to save the setting.
The following options are available:
104
Bluetooth
• Indicative tones: generates a tone whenever a pop-up
window appears on the screen.
• Minute minder: sets whether or not the phone beeps every
minute during an outgoing call to keep you informed of the
length of your call.
• Connection tone: sets whether or not the phone beeps when
your call is connected to the system.
• Alerts on call: sets whether or not you receive tones when a
message arrives while you are on a call.
Bluetooth
About Bluetooth
Bluetooth is a short-range wireless communications
technology capable of exchanging information over a
distance of about 30 feet without requiring a physical
connection.
Unlike infrared, you don't need to line up the devices to
beam information with Bluetooth. If the devices are
within a range of one another, you can exchange
information between them, even if they are located in
different rooms.
The following Bluetooth options are available:
Turn Bluetooth On/Off
ThisoptionallowsyoutoturnBluetoothOnorOff.Make
a selection and press the Select soft key or the
key.
My devices
This option allows you to search for new Bluetooth
devices. Highlight the Search new device option and
Section 8: Changing Your Settings
105
press the Select soft key or the
key. The phone will
search for available devices.
My visibility
ThisoptionallowsyoutoturnyourvisibilitytoOnorOff.
Make a selection and press the Select soft key or the
key.
My phone name
This option shows the name given to your phone for
Bluetooth purposes. You can edit the name if needed.
Security modes
This option allows you to set your security modes to On
or Off. Make a selection and press the Select soft key or
the
key.
Features
Actually, the Bluetooth specification is a protocol that
describes how the short-range wireless technology
works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the
chance that different devices will not work together.
The following Service profiles are available:
• Headset: The remote Bluetooth headset enables outgoing and
incoming calls.
• Handsfree: The remote Bluetooth car kit enables outgoing and
incoming calls.
• Bluetooth stereo headset: The Bluetooth headset enables you
to listen to music.
• File transfer: The Bluetooth device enables users to transfer
files from their handset to others.
106
Network Services
• Object push: The Bluetooth device enables the transfer of
personal data (for example, vCard, vCalendar, etc.) to other
devices.
• Basic printing: The remote Bluetooth printer enables to print
images, sms, personal data (for example, vCard, vCalendar,
etc.)
• Dial-up networking: The remote Bluetooth device enables
Internet access through a phone modem.
• Serial port: The remote Bluetooth device acts as a virtual serial
port.
Help
This options takes you to the Get More Help menu in
t-zones.
Network Services
Call forwarding
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to forward your business calls to a colleague while
you are on holiday.
To set your call forwarding options:
1. Select a call forwarding option by pressing the Up or
Down Navigation key and then press the Select soft key
or the
key.
The following options are available:
• Forward always: all calls are forwarded.
• Busy: calls are forwarded when you are already on another
call.
Section 8: Changing Your Settings
107
• No reply: calls are forwarded when you do not answer the
phone.
• Unreachable: calls are forwarded when you are not in an
area covered by your service provider or when your phone is
switched off.
• Cancel all: all call forwarding options are canceled.
2. Select the type of calls, Voice calls or Data calls, by
pressing the Up or Down Navigation key, and then press
the Select soft key or the
key.
The current status displays. If the option has already
been set, the number to which the calls are forwarded
displays.
3. To activate call forwarding, select Activate by using the
Left or Right key. The Forward to field becomes
available to input the number.
4. Enter the number to which the calls are to be forwarded
in the Forward to text box and press the Select soft key
or the
key.
To enter an international code, press and hold the
key until the + sign displays.
5. To deactivate call forwarding, select Deactivate by using
the Left or Right key.
6. When you select No reply in step 1, select the length of
time the network waits for before forwarding a call.
The phone sends your settings to the network and the
network’s acknowledgement displays.
108
Network Services
Call barring (SIM Dependent)
Call Barring allows you to restrict specific types of
incoming and outgoing calls for your phone. This is
usefulifyouallowsomeonetouseyourphoneforashort
period of time.
Call waiting
This network service informs you when someone is
trying to reach you during another call.
You can specify individual call waiting options for voice
calls and/or data calls.
To set your call waiting options:
1. Select the type of calls, Voice calls or Data calls, to
which the call waiting option is to be applied by pressing
the Up or Down Navigation key and then press the
Select soft key or the
key.
The screen informs you whether call waiting is activated
or deactivated.
2. Highlight Activate or Deactivate and press the Select
soft key or the
key.
3. Call waiting will then be activated or deactivated.
4. Select the Cancel all option to deactivate Call waiting on
all voice and data calls.
Network selection
The Network Selection feature enables you to
automatically or manually select the network used when
roaming outside of your home area.
Section 8: Changing Your Settings
109
Note: You can select a network other than your home network only if there
is a valid roaming agreement between the two.
To change Network Selection mode:
1. Highlight the Search Now option and press the Select
soft key or the
key.
2. Press the Up or Down Navigation key until the network
you want highlights and then press the Select soft key or
the
key.
The phone will scan for that network and you will be
connected.
To change you Default setup:
1. Highlight the Default Setup option and press the Select
soft key or the key.
2. Highlight either the Automatic or Manual option and
press the Select soft key or the key.
If you select Automatic, you are connected to the first
available network when roaming.
3. If you select Manual, press the Up or Down Navigation
key until the network you want highlights and then press
the Select soft key or the
key.
The phone will scan for that network and you will be
connected.
Caller ID
You can prevent your phone number from being
displayed on the phone of the person being called.
110
Security
Note: Some networks do not allow you to change this setting.
The following options are available:
• Default: the default setting provided by the network is used.
• Hide number: your number does not display on the other
person’s phone.
• Send number: your number is sent each time you make a call.
Security
TheSecurityfeatureenablesyoutorestricttheuseofyour
phone by others and to restrict the types of calls.
Various codes and passwords are used to protect the
features of your phone.
PIN check
When the PIN Check feature is enabled, you must enter
your PIN each time you switch on the phone.
Consequently, any person who does not have your PIN
cannot use your phone without your approval.
Note: Before enabling or disabling the PIN Check feature, you must enter
your PIN.
The following options are available:
• Disable: the phone connects directly to the network when you
switch it on.
• Enable: you must enter the PIN each time the phone is
switched on.
Section 8: Changing Your Settings
111
Change PIN
This feature allows you to change your current PIN,
provided that the PIN check feature is enabled. You must
enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Phone lock
When the Phone lock feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone
password each time the phone is switched on.
The password is preset to “00000000” at the factory. To
change the phone password, see Change Password.
Once the correct password has been entered, you can use
the phone until you switch it off.
The following options are available:
• Disable: you are not asked to enter the phone password when
you switch on the phone.
• Enable: you are required to enter the phone password when
you switch on the phone.
Change password
The Change password feature allows you to change your
currentphonepasswordtoanewone. Youmustenterthe
current password before you can specify a new one.
The password is preset to “00000000” at the factory. Once
you have entered a new password, you are asked to
confirm it by entering it again.
112
Security
Note: If you change your password, be sure to write it down and keep it in
a safe place. If you forget your password, your phone will require service
to have it unlocked.
Lock application
Usingthismenu, youcanlockyourmediacontents, such
asmessages,images, sounds,andvideos.Onceyouhave
locked the contents, you must enter the phone’s
password to access the associated menus.
1. To select an item to lock, press the Up or Down
Navigation key. To lock all of the contents, select All.
2. To place a check mark, press the
key.
key.
3. To remove a check mark, press the
4. To lock the marked items, press the Save soft key.
5. Enter a password and press the OK soft key or the
key.
Note:Thepasswordispresetto“00000000”atthefactory.
FDN mode
FDN (Fixed Dial Number) mode, if supported by your
SIM card, allows you to restrict your outgoing calls to a
limited set of phone numbers.
The following options are available:
• Disable: you can call any number.
• Enable: you can only call phone numbers stored in Phonebook.
You must enter your PIN2. You can obtain your PIN2 from your
service provider.
Section 8: Changing Your Settings
113
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the current
PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by
entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
Software update
This option lets you download Over-The-Air phone
software Updates from T-Mobile that improve the
performance of your phone. Only the internal software
is updated. No phonebook entries or other information
saved to your phone will be deleted.
Important! Make sure your phone battery is fully charged or connect your
phone to the Travel Adapter before selecting this option.
To update your phone’s software:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Settings icon.
Press the Select soft key or the
key to enter the
Settings menu.
3. Using the Navigation keys, highlight the Software
update option and press the Select soft key or the
key.
4. Follow the onscreen instructions.
114
Memory Status
Memory Status
Youcanchecktheamountofthememorybeingusedand
the memory remaining for Shared memory, Messages,
My Files, Calendar, Phonebook, and Games.
Thedisplayshowsthetotalspaceincludingtheusedand
freespace.Youcanalsoviewhowmuchspaceiscurrently
occupied by each message box.
You can also check how many names and numbers are
stored in Phonebook, in both SIM card and the phone
memory. You can also see the capacity of both memories.
Reset Settings
From this menu you can reset your phone and sound
settings to the default settings.
The following options are available:
• All: Phone, Display, and Sound settings will be returned to
default values.
• Phone settings: only phone settings will be returned to
default values.
• Display settings: only display settings will be returned to
default values.
• Sound settings: only sound settings will be returned to
default values.
To reset your settings:
1. Highlight one of the options and press the
key to
place a check mark next to the option.
2. Press the Reset soft key.
3. You will be prompted with Reset settings?. Press the
Yes soft key.
Section 8: Changing Your Settings
115
4. Enter the 4- to 8-digit password and press the OK soft
key or the
message.
key. You will receive a reset confirmation
The password is preset to “00000000.” To change this
116
My Files
My Files allows you tomanageyour sounds, images, and
videos in one convenient location.
Sounds
Inthismenu,youcanviewthelistofsoundsdownloaded
fromthe web serveror received in multimediamessages.
You can set a downloaded sound as the current ring tone.
Note: When downloading MegaTones® or HiFi Ringers TM, charges may
apply.
The following options are available:
Get More Mega Tones
Using the Get More Mega Tones option on the sounds
list, you can access the web site preset by T-Mobile and
download new sounds.
Get More HiFi Ringers
Using the Get More HiFi Ringers option on the sounds
list, you can access the web site preset by T-Mobile and
download new HiFi Ringers.
My Sounds
Highlight an item in the My Sounds menu and press the
Options soft key. The following options are available:
• Download new: opens your web browser where you can
download new sounds.
• Play: plays the selected audio file.
• Send via: allows you to send the sound via Picture message or
Bluetooth.
118
My Files
• Set as: allows you to set the sound as your ring tone, a Caller
ringtone, or an alarm tone.
• Delete: allows you to delete the selected sound or all sounds.
• Rename: allows you to change the name of the sound.
• Bluetooth visibility: allows the sound to be shared or released
for the use of another Bluetooth device.
• Lock: allows you to lock the sound to protect it from deletion.
• Properties: displays the sound name, date, format, length,
size, and Lock/Unlock.
Voice list
The Voice list contains your recorded audio messages.
Highlight an item and press the Options soft key. The
following options are available:
• Play: plays the audio message.
• Send via: allows you to send the audio message via Picture
message or Bluetooth.
• Set as: allows you to set this audio message as a Ringtone,
Caller ringtone, or an Alarm tone.
• Delete: allows you to delete the selected audio message or all
audio messages.
• Rename: allows you to change the name of the audio message.
• Bluetooth visibility: allows the audio message to be shared or
released for the use of another Bluetooth device.
• Lock: allows you to lock the audio message to protect it from
deletion.
• Properties: displays the audio name, date, format, length, size,
and Lock/Unlock.
Section 9: Fun & Apps
119
Images
Inthismenu,youcanviewthelistofimagesdownloaded
from the web server or received in messages. You can set
a downloaded image as the current background image.
The following options are available:
Get More Wallpapers
Using the Get More Wallpapers option, you can access
the web site preset by T-Mobile and download new
images.
Note: when downloading Wallpapers, charges may apply.
My Album
My Album is a private online picture album that you can
use to store and share pictures, videos, voice messages,
and text.
Use the following procedures to access My Album.
Note: When accessing My Album, charges may apply.
1. In your t-zone browser, select the My Albums Menu link
and press the Select soft key or the
key.
2. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
3. Press the
key to exit t-zones and return to the Idle
screen.
120
My Files
My Journal
MakenotesinMyJournal,youronlinediaryandWeblog.
Keep it private to store your personal memories, or send
e-mails to invite people to view and comment on your
album. See your service provider for more information.
Note: When making notes on My Journal, charges may apply.
My Downloads
This menu allows you to access your downloaded
images.
Scroll to the image you want to view. By pressing the
Options soft key you can access the following options:
• Download new: opens your web browser where you can
download new images.
• View: displays the image.
• Send via: allows you to send the image via Picture message or
Bluetooth.
• Set as: allows you to set the image as Wallpaper or as a Caller
ID.
• Delete: allows you to delete the selected image or all images.
• Rename: allows you to change the name of the image.
• Display mode: allows you to set the display mode to Line view
or Thumbnail view.
• Slide show: allows you to set the time for the slide show to
cycle through the images. Choose 1 second or 3 seconds.
• Bluetooth visibility: allows the selected or multiple images to
be shared or released for the use of another Bluetooth device.
Section 9: Fun & Apps
121
• Print via Bluetooth: allows you to print using a Bluetooth
device.
• Lock: allows you to lock the image to protect it from deletion.
• Properties: displays the image name, date, format, resolution,
size, quality, and Lock/Unlock.
My Photos
In this menu you can review the photos you’ve taken.
Highlight a photo and press the Options soft key to
choose from the following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send your photos to My
Album.
• Send via: allows you to send the picture via Picture message or
Bluetooth.
• Set as: allows you to set the photo as your Wallpaper or as a
Caller ID.
• Default destination: allows you to Remove or Replace where
your photos are sent after you take them.
• Edit image: allows you to add emoticons or frames to your
photos or apply special effects.
• Delete: allows you to delete the selected photo or multiple
photos.
• Rename: allows you to rename the photo.
• Display mode: allows you to view the photos in Line view or
Thumbnail mode.
• Slide Show: allows you to see all of your photos in a slide show
presentation.
• Bluetooth visibility: allows the photo to be shared or released
for the use of another Bluetooth device.
122
My Files
• Print via Bluetooth: allows you to print using a Bluetooth
device.
• Lock: allows you to lock the photo to protect it from deletion.
• Properties: displays the image name, date, format, resolution,
size, and protection.
Videos
In this menu, you can view a list of videos downloaded
fromthewebserverorreceivedinmultimediamessages.
The following options are available:
Downloaded videos
This menu allows you to access your downloaded video
clips.
Scroll to the video you want to view. By pressing the
Options soft key you can access the following options:
Note: when downloading videos, charges may apply.
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Delete: allows you to delete the video.
• Rename: allows you to change the name of the video.
• Display mode: allows you to view the photos in Line view or
Thumbnail mode.
• Bluetooth visibility: allows the video to be shared or released
for the use of another Bluetooth device.
• Lock: allows you to lock the video to protect it from deletion.
Section 9: Fun & Apps
123
• Properties: displays the video name, date, format, resolution,
size, length, quality, and Lock/Unlock.
My Videos
In this menu you can review the photos you’ve taken.
Highlight a video and press the Options soft key to
choose from the following options:
• Play: plays the video.
• Send via: allows you to send the video via Picture message or
Bluetooth.
• Delete: allows you to delete the selected video or all videos.
• Rename: allows you to rename the video.
• Display mode: allows you to view the photos in Line view or
Thumbnail mode.
• Bluetooth visisbility: allows the video to be shared or released
for the use of another Bluetooth device.
• Lock: allows you to set protection on this video so that it cannot
be deleted.
• Properties: displays the video name, date, format, resolution,
size, length, quality, and Lock/Unlock.
Music
You can listen to music you have loaded to your handset
by using this menu option. The following options are
available:
• Play: allows you to listen to the music file you have selected.
• Send via Bluetooth: allows you to send the video via Picture
message or Bluetooth.
• Add to play list: allows you to add the selected song to 1 -4
playlists.
124
Games
• Set as: allows you to set the music file as a Ringtone, Caller
ringtone, or Alarm tone.
• Delete: allows you to delete the selected audio or all audio
files.
• Settings: allows you to set the settings for the audio files to be
played. Set Repeat mode, Shuffle, Visualization (Type 1 or Type
2) and Volume (choose from Mute - 10).
• Rename: allows you to rename the audio file.
• Bluetooth visibility: allows you to enable this music file or
multiple music files available for bluetooth access.
• Lock: allows you to set protection on this music file so that it
cannot be deleted.
• Properties: displays the audio name, date, format, bitrate,
length, size, and Lock/Unlock.
Memory Status
You can check the amount of memory being used and
memoryremainingforsounds,images,andvideos.Press
the Left or Right navigation keys to scroll between the
memorystatusofSounds,Images,Videos,andMyMusic.
Games
YoucandownloadMIDlets(Javaapplicationsthatrunon
mobile phones) from various sources using t-zones and
store them in your phone.
When you access the Games menu, the list of default
games appears. Once you have downloaded games, they
are added to the list.
Note: Java services may not be available, depending on your service
provider.
Section 9: Fun & Apps
125
Get More Games
You can download more games from the web site preset
by your service provider using the Get more games
option.
Note: when downloading games, charges may apply.
Note: MIDlet game options will differ depending on the MIDlet you select.
MIDlet Options
1. In the Games Menu, scroll to the MIDlet you want and
press the Options soft key.
The following options are available:
• Start: starts the MIDlet.
• Delete: allows you to delete a MIDlet.
• Lock: allows you to lock the game to protect it from deletion.
• Properties: shows information about the MIDlet, such as file
size, application version, vendor, and website address.
• Memory status: Shows you how much memory is left for
your games.
2. To exit and return to the Games list, press the Back soft
key or the
key.
Music Player
This menu allows you to set options for the music player.
The following options are available if there is no music
loaded:
• Add music: allows you to add the selected song to the playlist.
126
Camera
• Open playist: allows you to open the My playlist or the Current
playlist.
• Settings: this menu allows you to set the Repeat mode,
Shuffle, Visualisation, and Volume for the music.
Once a song has been added to the playlist, the following
options are available:
• Play via: allows you to play the audio file on the phone, or on
the Bluetooth stereo headset.
• Open playlist: allows you to select from My playlist or the
Current playlist.
• Set as: allows you to set the audio file as the Ringtone, Caller
ringtone, or the Alarm tone.
• Remove from playlist: allows you to remove the selected
audio file from the playlist.
• Settings: allows you to set the settings for the audio files to be
played. Set Repeat mode, Shuffle, Visualization (Type 1 or Type
2) and Volume for the music.
• Shortcuts: allows you to view the shortcut keys for the audio
player.
Camera
For information on using your camera and camcorder,
Voice recognition
VoiceSignal is advanced speech recognition
software that can be used to activate a wide-variety
of functions on your phone. VoiceSignal software
automatically voice activates all contacts for voice
dialing and searching, no pre-recording or training
needed. Speak phone numbers naturally to dial, and
Section 9: Fun & Apps
127
use voice commands to launch applications and
navigate phone menus.
VoiceSignal Options
The following is a list of functions that you can
perform using VoiceSignal speech recognition on
your phone.
• Call <Name or #>: dial by saying either a Name or a number in
your Contact list
• Send text <Name>: send a text message to a number or to
someone in your Contact list.
• Lookup <Name>: open the contact record for any name in
your Contact list.
• Go to <App>: open any application installed on your device.
• Check <Item>: provides details of your network coverage,
signal strength, and battery level.
Call Digit Dialing
Digit Dial allows you to dial any phone number by
simply speaking the digits into the phone. No
training is necessary, and Digit Dial is programmed
to understand natural speech.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and press the
Select soft key or the
key.
128
Voice recognition
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. To use Digit Dialing, say “Call” and the area code and
number that you want to dial at a distance of 3-12 inches
from the phone in a natural voice.
3. The number that you said is repeated through the
earpiece and your phone dials the number.
4. If VoiceSignal is not sure of the number that you said, a
list of possible matches appears in the display.
5. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
Call Name Dialing
To use Name Dial, you’ll need to have entries stored
in your Phonebook. See "Section 6: Understanding
creating Phonebook entries.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
Section 9: Fun & Apps
129
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. To use Name Dialing, say “Call” and the name of the
contact that you want to dial.
3. The name that you said is repeated through the earpiece
and your phone dials the number.
4. If VoiceSignal is not sure of the name that you said, a list
of possible matches appears in the display.
5. You’re asked to confirm the correct number as
VoiceSignal displays the results. Say “Yes” or “No” to
confirm or reject the number when prompted.
6. The location is repeated through the earpiece and your
phone dials the number.
Send Text Message
1. In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the key.
2. A list of commands appears in the display and the audio
prompt “Say a command” plays through the earpiece.
3. Say “Send Text” at a distance of 3-12 inches from the
microphone. “Say the Name or Number” plays through
the earpiece.
4. After you say a name or number, you might be prompted,
“Did you say?” To confirm a name or number, wait for
the beep and then say “Yes.”
130
Voice recognition
5. You can also choose the correct name or number from
the choice list using the phone’s arrow keys.
6. The Text Message client is launched. Enter your text
message.
Name Lookup
To perform a name lookup, you’ll need to have some
entries in your Contact list.
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. Say “Lookup” at a distance of 3-12 inches from the
microphone. “Say the name” plays through the earpiece.
3. Say the name exactly as it is displayed in your Contact
list, first name followed by last name.
4. The contact name appears in the display with other
information that you’ve entered for that contact.
Opening Applications
You can open an application or access a menu on
your phone using VoiceSignal.
1. Access VoiceSignal by doing one of the following:
Section 9: Fun & Apps
131
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. Say “Go To” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece. If the option
you desire is not listed, say “Next Menu” to scroll to the
next page.
3. The menu option spoken opens.
Checking Phone Status
Use the Check command to see and hear status
information from your phone, including its phone
number, status, current signal strength, network
coverage, and battery level.
To check phone status:
1. Access VoiceSignal by doing one of the following:
• Press and hold the
key.
• Press and hold the Multi-Function button on a plug-in
headset or a Bluetooth headset.
• In the Fun & Apps menu, select Voice recognition and
press the Select soft key or the
key.
132
Voice recognition settings
After a brief pause, a list of optional commands appears
in the display (and the “Say a command” message
appears in the external display) and the audio prompt
“Say a command” plays through the earpiece.
2. Say “Check” at a distance of 3-12 inches from the
microphone. A list of options displays and a prompt of
“Please choose” plays through the earpiece.
3. The phone status menu option spoken is displayed.
Voice recognition settings
You can adjust the settings and preferences for
VoiceSignal by opening the Voice recognition
settings menu.
To access the VoiceSignal Settings menu, while in the
VoiceSignal application, follow these steps:
1. Press the Settings soft key.
2. Use the navigation keys to select the setting you want to
change.
The following options are available:
• Choice lists: if VoiceSignal is not absolutely confident that it
has correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you to
confirm the correct one. You can control when choice lists
appear by changing the Choice Lists setting to the following:
• Automatic: VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
• Always on: when there are multiple alternatives, VoiceSignal
always displays a choice list.
Section 9: Fun & Apps
133
• Always off: VoiceSignal never displays a choice list. Instead,
the application picks the best from among the possible
choices.
• Sensitivity: in VoiceSignal, sensitivity controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or commands,
and rejecting too little, which means it frequently recognizes
something even if nothing was said. When VoiceSignal rejects
an utterance, it displays a message such as “Please repeat…”
or “No match found.” If you frequently experience these
messages, you might be able to get better recognition by
adjusting the Sensitivity setting toward Reject Less. If you
frequently experience false activations (VoiceSignal detects a
wrong match), you might be able to get better performance by
adjusting the Sensitivity setting toward Reject More.
• Digit dialing: use the Digit Dialing menu to adapt digit dialing to
your voice.
• Select location: lets you set the region or country.
• Adapt digits: lets you adapt digits, which can improve voice
recognition of phone numbers. Adaptation takes about 60
seconds.
• Reset digits: erases any digit adaptation you have done and
resets digit recognition to the factory default. If you have not
adapted digits, this option is grayed out.
• Sound: you can customize the VoiceSignal user interface by
turning playback on or off for prompts, names, and numbers.
You can also change the speed and volume of name playback.
• Prompts: turns playback on or off for prompts such as
“Please say a command.”
• Digits: turns playback on or off for digits, for example, when
confirming a phone number.
• Names: turns playback on or off for names.
134
Organizer
• Name settings: adjusts the Speed and Volume of name
playback.
• Speakerphone: turns the Speakerphone on or off when
voice recognition is started.
• About: displays information about VoiceSignal including
Version number, Build number, and Device number.
Organizer
The Organizer allows you to set alarms, schedule
appointments, view the calendar, create To-Do lists,
perform simple math calculations, check world time,
perform unit conversions, set a timer, and use a
stopwatch.
Alarm
This feature allows you to:
• set up to 3 alarms to ring at specified times.
• set the phone to switch on automatically and ring the alarm
even if the phone is switched off.
The following options are available:
• Wake-up call: the alarm rings to wake you up in the morning.
• Alarm1: set the day, time, and tone for this alarm.
• Alarm2: set the day, time, and tone for this alarm.
• Auto power-up: alarm rings at the specified time even if the
phone is turned off. If the option is set to Off and the phone is
switched off at the specified time, the alarm does not ring.
To set the alarm:
1. After selecting an alarm, highlight the Alarm option and
press the Right navigation key to set Alarm to On.
Section 9: Fun & Apps
135
2. Press the Down key to highlight the Alarm time option.
Enter the time you want the Alarm to sound.
3. Press the Down key to highlight the AM/PM option.
Press the Left or Right navigation key to set to AM or
PM.
4. Press the Down key to highlight the Monday-Sunday
checkboxes. Press the
key to bring up a list of days.
5. Place a checkmark next to the days you want the alarm
to sound. To place or remove a check mark, press the
key. Press the OK soft key.
6. Press the Down key to highlight the Alarm tone option.
Press the
key to bring up a list of alarm melodies.
7. Press the Up or Down Navigation key to highlight a
default alarm melody. Or, press the Right navigation key
to display a list of downloaded sounds that you may
choose from.
8. Press the Save soft key.
9. Press the
key to return to Idle mode.
Note: Your phone is preset to a 12-hour format. To change the time format,
10. To stop the alarm when it rings, press any key or press
the Snooze soft key.
136
Organizer
Calendar
With the Calendar feature, you can:
• consult the calendar by month, week, or day.
• set schedules and note anniversaries
• make a tasks list.
• write memos to keep track of your schedule.
• set an alarm to act as a reminder, if necessary.
• check your memory status.
When you select the Calendar menu, the following
options are available:
Month view
When you select this option, the calendar displays the
selected month with today’s date highlighted.
At the bottom of the calendar, the following icons are
displayed along with the number of entries for each:
Schedule items
Anniversary events
To do items
Miscellaneous items
The number of entries next to each icon reflects the
number of entries for the selected day on the calendar.
The following options are available when you press the
Options soft key:
• View mode: takes you to the Day view or Week view of the
selected day.
Section 9: Fun & Apps
137
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or task.
• Go to: takes you to the Today’s date or another date
highlighted.
• Delete: allows you to delete all events for a selected date, or
delete all events for preceding dates. You can also delete all
events.
Week view
When you select this option, the calendar displays the
selected week with today’s date and time highlighted.
The following options are available when you press the
Options soft key:
• View mode: takes you to the Day view or Month view of the
selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or task.
• Go to: takes you to today’s date or another date highlighted.
• Delete: allows you to delete all events for a selected date,
delete all events for a specified period, or delete all events for
this weeks dates. You can also delete all events.
Day view
Whenyouselectthisoption,youaretakentotheDayview
of the selected day with any events listed. The following
options are available when you press the Options soft
key:
• View: takes you to the Day view of the selected day.
• Create: allows you to create a Schedule, Anniversary,
Miscellaneous, or task.
• Send via: allows you to send this event via text message,
picture message, or by using a Bluetooth device.
138
Organizer
• View mode: allows you to choose between Month or Week
view.
• Delete: allows you to delete all events for a selected date, or
delete all events for this days’ dates. You can also delete all
events.
Schedule
This option allows you to write memos to a schedule.
1. Highlight the Schedule option and press the Select soft
key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft
key or the
key.
4. Enter the subject in the Subject text box then press the
Down soft key.
5. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, AM/
PM, Location, Alarm, before, Alarm tone, Repeat and
Until.
6. When you are finished, press the Save soft key.
Anniversary
This option allows you to record Anniversaries in your
calendar. You can also set an alarm to remind you of
important anniversaries.
1. Highlight the Anniversary option and press the Select
soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key
or the
key.
Section 9: Fun & Apps
139
4. Enter the occasion in the Occasion text box then press
the Down soft key.
5. Continue to enter other information including Date,
Alarm, before, Alarm time, AM/PM, Alarm tone, and
Repeat every year.
6. When you are finished, press the Save soft key.
Your Anniversary information is saved to the Calendar.
Miscellaneous
This option allows you to record miscellaneous dates or
events in your calendar.
1. Highlight the Miscellaneous option and press the Select
soft key or the
key.
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key
or the
key.
4. Enter the subject in the Subject text box then press the
Down soft key.
5. Continue to enter other information including Details,
Start date, Start time, AM/PM, End date, End time, AM/
PM, Alarm, before, and Alarm tone.
6. When you are finished, press the Save soft key.
Your Miscellaneous information is saved to the Calendar.
Tasks
This feature allows you to enter a list of tasks to be done.
1. Highlight the Tasks option and press the Select soft key
or the
key.
140
Organizer
2. Press the Options soft key.
3. Highlight the Create option and press the Select soft key
or the key.
4. Enter the Item to be done in the Task text box then press
the Down soft key.
5. Continue to enter other information including Start date,
Due date, and Priority.
6. When you are finished, press the Save soft key.
Your Task list is saved to the Calendar.
Editing the Tasks List
WhenyouselecttheTaskslistmenu,thecurrentcontents
display with a status checkbox and a priority marker.
If the item has been done, a check appears in the
checkbox.
Highpriorityitemshavearedexplanationmark,Normal
priority items have a blue explanation mark, and Low
priority items have a gray explanation mark.
1. To mark an item Done, highlight the item and press the
key.
2. Press the Options soft key.
3. Highlight the Done option and press the Select soft key
or the
key.
4. The status checkbox next to the Task item will be
checked.
5. To edit other fields in the Task item, highlight the item
and press the
key.
Section 9: Fun & Apps
141
6. Press the Options soft key.
7. Highlight the Edit option and press the Select soft key or
the
key.
8. Edit the items you wish to change.
9. Press the Options soft key.
10. Highlight the Save option and press the Select soft key
or the
key.
Missed alarm events
You can check on all of the events that you have set an
alarm on.
1. Highlight the Missed alarm events option and press the
Select soft key or the
2. To view an event information, highlight an event and
press the key.
key.
The missed alarm event information is displayed.
3. To acknowledge and remove the event, press the
Confirm soft key or the
key.
The event will be removed from the Missed alarm events
menu.
Memory status
Thismenuitemshowsthenumberofcalendareventsyou
presently have and how many more you memory space
for.ItbreaksdownyoureventsbySchedule,Anniversary,
Miscellaneous, To do, and Memo.
142
Organizer
Calculator
With this feature, you can use the phone as a calculator.
The calculator provides the basic arithmetic functions;
addition, subtraction, multiplication, and division.
1. Enter the first number using the numeric keys.
2. Enter the operation for your calculation by pressing the
key according to the illustration on the display. The
key is used for the decimal. The
used to create brackets.
key can also be
3. Enter the next number.
4. To view the result, press the
Repeat steps 1 to 4 as many times as required.
Tip calculator
key.
This feature provides the percentage amount for tip. Use
the following procedures to calculate a tip amount.
1. Highlight Tip calculator and press the Select soft key or
the
key.
2. In the Bill field, enter the check amount.
Note: To enter the decimal point for the exact dollar amount, use the
key.
3. Use the Down Navigation key to highlight Tip(%)
percentage. 15 is the default value but this can be
changed.
4. The Tip($) field value is calculated according to the
values entered.
Section 9: Fun & Apps
143
5. Use the Down Navigation key to move to the # paying
field to change the number of people contributing to the
tip amount.
6. The You pay field displays what each individual is to pay.
World Time
This feature allows you to find out what time it is another
part of world, using the Left and Right Navigation keys.
There are two time lines available. You can set the first
setting to your home city and then use the second setting
to check other city times.
Press the Options soft key for the following options:
• Save: this allows you to save your world time settings.
• Set daylight saving time: use the
key to place a
checkmark next to the cities that you want to set daylight
savings time. Each city listed represents a time zone.
• Change Home Zone: use this menu to set the default time zone
you wish to use to measure other time zones.
Unit Conversion
The conversion menu provides the following conversion
categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
144
Organizer
To convert a currency, length, weight, volume, area, or
temperature, do the following:
1. Scroll to the conversion feature you wish to use and
press the Select soft key or the
key.
2. Enter the quantity you want converted.
Note: To include a decimal point, press the
key.
3. Use the Up, Down, Left, and Right navigation keys to
select the From and To units of measure for the quantity
you want converted.
4. Press the Back soft key to return to the Unit conversion
menu.
Timer
You can use this menu to set a timer. To enable the Timer,
use the following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key
again to stop the timer.
Stopwatch
This feature allows you to use a stopwatch. Press the
keytostartthestopwatch.PresstheResetsoftkeytoerase
allstopwatchtimesrecorded. Pressthe
time. You can have up to 4 lap times.
keyforthelap
Section 9: Fun & Apps
145
Image editor
TheImageeditorallowsyoutousephotosyou’vealready
taken or launches the camera to take a new photo. To
access this menu, use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Image editor and press the Select soft key or
the key.
4. Press the Options soft key. New image is displayed. Use
the Right Navigation key to go to My photos or Take
photo.
5. Highlight My photos to go to the photos you have
already taken. Press the Options soft key to View or
Load the selected photo into the Image editor.
6. The View option displays the selected image before
loading the image into the Image editor, and the Load
option automatically loads the image.
7. Press the Option soft key to display the following:
• Send via: allows you to send the image via Picture message
or a Bluetooth device.
• New image: allows you to go to the My photos folder or
launches the camera to Take photo.
• Save: allows you to save any effects that you have applied to
the selected image. Press the Yes soft key to overwrite the
image or No to cancel overwrite.
146
Image editor
• Effects: allows you to set an effect for the selected image.
Choose from No effect, Black & White, Negative, Sepia,
Emboss, or Sketch.
• Insert: allows you to insert Frames, Emoticons, or Clip Art.
• Set as: allows you to set the selected image as the
Wallpaper or a Caller ID.
• Bluetooth visibility: allows you to set the selected image as
visible for a Bluetooth device.
• Print via Bluetooth: allows you to send the selected image
to print using Bluetooth.
• Undo: allows you to remove any effects you have applied to
the selected image.
Note: The Undo option will not return the image to the original state after
the Save option has been performed.
Section 9: Fun & Apps
147
148
Section 10: Camera and Camcorder
Topics Covered
• Using the Camera and Camcorder
• Take and Send
• Record Video
• My Photos
• My Videos
• My Album
• My Journal
This section explains how to use the camera and
camcorderonyourphone.Youcantakephotosandvideo
clips using the built-in camera and camcorder.
Section 10: Camera and Camcorder
149
Using the Camera and Camcorder
Using the camera/camcorder module in your phone,
you can take photos or video clips of people or events
while on the move. Additionally, you can send photos
and video clips to other people in a Picture Messaging
message or set a wallpaper or caller ID image.
Note:
Do not take photos or videos of people without their permission.
Do not take photos or videos in places where cameras are not allowed.
Do not take photos or videos in places where you may interfere with
another person’s privacy.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
1. In Idle mode, press and hold the key on the right side
of the phone to turn on the camera.
You can also press the Menu soft key to access Menu
mode. Using the Navigation keys, scroll to the Fun &
Apps icon. Press the Select soft key or the
key to
enter the menu.
2. Highlight Camera and press the Select soft key or press
the key.
3. Highlight Take and Send and press the Select soft key
or the key.
150
Take and Send
4. Adjust the image by aiming the camera at the subject.
Press the Left soft key to access the camera options. For
details, see "Using Camera Options" on page 151.
You can use the keypad to quickly change the camera
options.
5. Press the or
key to take the photo. Send to: My
Album? is displayed. Press the Yes soft key if you want
to send the photo to your T-Mobile My Album service.
The phone’s default destination is set to My Album. The
photo is automatically saved in My Photos in the phone.
Note: To change the default destination for your pictures, press the
Options soft key when Send to: My Album? appears on the display.
Highlight the Default destination option and the Replace option. You can
then change your default destination to a phone number, email address,
Phonebook, My Album, My Journal, and Recent recipients.
6. To use the photo options, press the Options soft key.
7. To return to Capture mode, select Take another and
press the Select soft key or the
key.
8. To return to Idle mode, press the
key.
Using Camera Options
In Capture mode, you can use various options for the
camera by pressing the Left soft key.
The following options are available:
• Record video: allows you to record a video.
• Shooting Mode: allows you to take a photo in various modes.
Once you change the mode, the corresponding indicator
appears at the top right of the display.
Section 10: Camera and Camcorder
151
• Single shot: allows you to take a photo in the normal mode.
• Multi shot: allows you to take a series of action stills. Select
the capture speed, High Speed or Normal Speed, and the
number of photos the camera will take.When you press the
key, the camera takes photos successively.
• Mosaic style: allows you to take four pictures to create a
mosaic picture.
• Effects: allows you to change the color tone or apply special
effects to the photo.
• Frames: allows you to select a decorative frame. Select a frame
from the list using the Navigation keys and press the
to save your setting.
key
• Timer: allows you to set a time delay before the camera takes
the photo. Select the length of delay you want. When you press
the or
key, the camera takes the photo after the
specified time has elapsed.
• Go to My photos: takes you to your My photos folder.
• Settings: allows you to change the Function and Setup
settings.
Function settings
• Size: allows you to set the image size to either 1280x1024,
1024x768, 800x600, 640x480, 320x240, 176x220,
176x144. The selected image size displays on the capture
screen.
• Viewfinder mode: allows you to set the view finder to Full
screen & Indicator, Full screen & Guideline, Actual ratio.
• Scene program: allows you to set the camera options to record
normal or night scene.
• Metering exposure: allows you to choose the Matrix, Center-
weighted, or Spot.
152
Take and Send
• White balance: allows you to set this option from the following
choices: Auto, Daylight, Incandescent, Flourescent, or Cloudy.
• ISO: Allows you to set ISO to Auto, 100, 200, or 400. The ISO
value is a number indicating the digital camera sensors
sensitivity to light. In bright light, set the ISO value lower.
Setup options
• Shutter sound: allows you to select a tone for the shutter
sound. Choose between 5 tones.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On or
Off.
• Default name: allows you to change the default name assigned
to your photo.
• Camera Shortcut: shows you how to change options using
your keypad in capture mode. The following short cuts are
available:
Up and Down navigation keys adjust the image brightness.
Left and Right navigation keys zoom in and out.
flips the image vertically
shows the mirror image
changes from camera to camcorder or camcorder to camera.
changes the picture resolution.
changes the camera Shooting mode.
Section 10: Camera and Camcorder
153
changes the color tone or applies a special effect to the
video.
changes the ISO ratio.
selects a decorative frame.
sets a time delay.
takes you to My Photos menu.
enlarges the display screen.
Record Video
In Normal mode, your camcorder produces videos in
MP4 format. And in Limit for message, the file saves in
3GP format.
1. In Idle mode, press the key on the right side of the
phone to turn on the camera. Press the
key to
toggle from camera to camcorder.
You can also press the Menu soft key to access Menu
mode. Using the Navigation keys, scroll to the Fun &
Apps icon. Press the Select soft key or the
key to
enter the menu.
2. Using the Navigation keys, scroll to the Camera option.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Record Video and press the Select soft key or
the key.
4. Adjust the image by aiming the camcorder at the subject.
Press the Options soft key to access the camcorder
options. For details, see "Using Camcorder Options" on
154
Record Video
You can use the keypad to quickly change the camcorder
options.
5. To start recording your video clip, press the
key.
6. To stop the recording, press the key or the Stop soft
key. The video clip is automatically saved in the My
Videos folder.
7. To return to Idle mode, press the
key. To access
camcorder options, press the Options soft key.
Using Camcorder Options
In Capture mode, you can use various options for the
camcorder by pressing the Options soft key.
The following options are available:
• Take picture: allows you to take a photo in camera mode.
• Effects: allows you to change the color tone or apply special
effects to the video clip.
• Timer: allows you to set a time delay before the camcorder
takes the video clip. Select the length of delay you want. When
you press the or
key, the camcorder records the video
after the specified time has elapsed.
• Go to My video: takes you to your My videos folder.
• Settings: allows you to change the recording settings.
• Recording mode: allows you to set the recording size.
Choose Normal for a longer recording, or Limit for
message to allow this recording to be sent via MMS.
• Size: allows you to set the image size to 176x144, or
128x96. The selected image size displays on the capture
Section 10: Camera and Camcorder
155
screen. When you change the Recording mode to Normal,
you can choose 160x120.
• Audio record: allows you to record sound with your video.
You can set this option On or Off.
• White balance: allows you to set the white balance before
recording. Choose from Auto, Daylight, Incandescent,
Flourescent, or Cloudy.
• Zoom sound: allows you to turn zoom sound On or Off.
• Brightness sound: allows you to turn brightness sound On
or Off.
• Default name: allows you to change the default name
assigned to your video.
Camcorder Short Cut: shows you how to change
options using your keypad in capture mode. The
following short cuts are available:
Up and Down navigation keys adjust the image brightness.
Left and Right navigation keys zoom in and out.
flips the image vertically
shows the mirror image
changes from camera to camcorder or camcorder to camera.
changes the video resolution.
changes recording mode from Normal to Limit for MMS.
changes the color tone or applies a special effect to the video.
turns sound on or off.
156
My Photos
sets a time delay.
takes you to My Videos menu.
changes the white balance.
My Photos
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My photos and press the Select soft key or the
key.
When you access this menu, your phone displays the
photos in Line view, which shows them as small
images. Use the Navigation keys to scroll through the
photos.
5. To view the photos on the full screen, press the
To go back to Line view, press the Back soft key or the
key.
key.
6. Press the Options soft key to use the following options:
• View: allows you to view the photo on your display.
• Send to My Album: allows you to send your photos to My
Album.
• Send via: allows you to create and send a photo in a picture
message or by Bluetooth.
Section 10: Camera and Camcorder
157
• Set as: allows you to set the photo as your Wallpaper or as a
Caller ID.
• Default destination: allows you to Remove or Replace
where your photos are sent after you take them.
• Edit image: allows you to add emoticons or frames to your
photos or apply special effects.
• Delete: allows you to delete the photo.
• Rename: allows you to rename the photo.
• Display mode: allows you to view the pictures in Line
view or Thumbnail view.
• Slide Show: allows you to see all of your photos in a slide
show presentation. Choose from 1 or 3 seconds intervals.
• Bluetooth visibility: allows the photo to be shared or
released for the use of another Bluetooth device.
• Print via Bluetooth: allows you to send the picture to an
available and active Bluetooth device.
• Lock: allows you to protect the photo from being deleted.
• Properties: shows the properties of the photo, such as the
file name, file date, file format, image resolution, file size, and
protection.
Deleting a Photo
You can delete photos one by one or all at one time.
1. From the My Photos menu, highlight the photo you want
to delete. Press the Options soft key and select View.
Press the Select soft key or the
key.
2. The photo will be displayed. Press the Options soft key
and select Delete.
3. Press the Yes soft key to confirm the deletion.
4. When you have finished, press the
key.
158
My Videos
My Videos
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My videos and press the Select soft key or the
key.
When you access this menu, your phone displays the
video clips in Line view, which shows them as small
images. Use the Navigation keys to scroll through the
video clips.
5. To view the video clips on the full screen, press the
key. To go back to Line view, press the Back soft key or
the
6. Press the Options soft key to use the following options:
My videos Options
key.
IntheMyvideosmenu, presstheOptionssoftkeytouse
the following options:
• Play: allows you to play the video clip on your display.
• Send via: allows you to send the video as part of a Picture
message or Bluetooth.
• Delete: allows you to delete the selected video clip or delete all
video clips.
• Rename: allows you to change the name of the video clip.
Section 10: Camera and Camcorder
159
• Display mode: allows you to choose from Line view or
Thumbnail view.
• Bluetooth visibility: allows the selected video or multiple
videos to be shared or released for the use of another Bluetooth
device.
• Lock: allows you to protect the video clip from being deleted.
• Properties: shows the properties of the video clip, such as the
name, date, format, resolution, size, video length, quality, and
Lock/Unlock.
Deleting a Video Clip
You can delete video clips one by one or all at one time.
1. From the My videos menu, use the Up or Down
Navigation key to highlight the video you want to delete
and press the Options soft key.
2. Highlight the Delete Option, then press the Right
Navigation key.
3. Highlight Selected if you only want to delete the video
clip that you selected. Highlight Multiple if you want to
delete all video clips.
4. Press the Yes soft key to confirm the deletion.
5. When you have finished, press the
key.
My Album
My Album is a private online picture album that you can
use to store and share pictures, videos, voice messages,
and text.
Use the following procedures to access My Album.
160
My Journal
Note: When accessing My Album, charges may apply.
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the Fun & Apps icon.
Press the Select soft key or the
key to enter the
menu.
3. Highlight Camera and press the Select soft key or the
key.
4. Select My Album and press the Select soft key or the
key. The browser is launched and the T-Mobile Web
page displays.
5. Scroll down to the My Album link and press the Select
soft key or the
6. Select the My Albums Menu link and press the Select
soft key or the key.
key.
7. Photos sent to this folder are stored in the Inbox Album.
Press the Select soft key to view the photos.
8. Press the
key to exit t-zones and return to the Idle
screen.
My Journal
MakenotesinMyJournal,youronlinediaryandWeblog.
Keep it private to store your personal memories, or send
e-mails to invite people to view and comment on your
album. See your service provider for more information.
Section 10: Camera and Camcorder
161
Note: When accessing My Journal, charges may apply.
162
t-zones
Your phone is equipped with a WAP (Wireless
Application Protocol) browser to allow you to access and
navigate the Wireless Web using your phone.
Note: You can enter t-zones without going through the t-zones menu by
simply pressing the t-zones soft key while in Idle mode.
To access t-zones, follow these steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
2. Using the Navigation keys, scroll to the t-zones icon.
Press the Select soft key or the
key to enter the
menu.
The following options are available:
Home
Selecting this menu connects the phone to the network
and loads the t-zones homepage.
The content of the t-zones startup homepage depends on
yourWirelessWebserviceprovider. Toscrollthrough the
screen, use the Up and Down keys.
Togotothestartuphomepagefromanyotherscreeninthe
t-zones, use the Home option. For more information on
the t-zones menus, see "Selecting and Using Menu
Exiting the t-zones
To exit the browser at any time, simply press the
key.
164
t-zones
Navigating the t-zones
1. To scroll through browser items, press the Up or Down
Navigation key.
2. To select browser items, press the
3. To return to the previous page, press the Back soft key or
the key.
key.
4. To return to the startup homepage, press the Home soft
key.
Entering Text in the t-zones
Whenyouarepromptedtoentertext, thecurrentlyactive
text input mode is indicated on the screen. The following
modes are available:
• Upper-case character mode (A): allows you to enter upper-
case English characters.
• Lower-case character mode (a): allows you to enter lower-
case English characters.
Note: You can enter symbols in upper-case or lower-case character mode
by pressing the
key.
• Number mode (1): allows you to enter numbers.
To change the text input mode, use the following
procedures:
1. Press the Right soft key one or more times.
2. To enter a space, press the
key.
3. To edit text, set the cursor to the right of the character(s)
to be corrected.
4. Press the
key as required.
Section 11: t-zones
165
5. Enter the correct character(s).
Selecting and Using Menu Options
Various menus are available when you are using t-zones
to navigate the Wireless Web.
To access the browser options menu:
1. Press the Menu soft key.
Note: The menus may vary, depending on your version of t-zones.
The following options are available:
• Go to URL: allows you to manually enter the URL address of a
Web page. After entering an address, press the
there directly.
key to go
• Bookmarks: shows the bookmarks list. You can bookmark the
current web page or access previously bookmarked pages.
• Messages: allows you to create a text message or check your
My Messages folder.
• My Files: allows you to go to your My Files folders.
• Home: takes you back at any time to the home page of the
Wireless Web service provider.
• Back: takes you back to the previous web browser screen.
• Show URL: displays the URL address of the Web page to which
you are currently connected. It also enables you to set the
current site as the startup home page.
• Reload: reloads the current page.
166
t-zones
Favorites
This menu stores up to 10 URL addresses.
To store a URL address:
1. Select an empty location and press the Select soft key or
the key.
2. Enter a name for the favorite item in the Name text box
and press the Down key.
3. Enter the address in the URL text box and press the
Options soft key.
4. Highlight the Save option and press the Select soft key
or the
key.
After saving favorite items, you can access the following
options by highlighting the item, then pressing the
Options soft key:
• Go: takes you to the site.
• Edit: allows you to edit the address.
• Delete: allows you to delete the address.
Or, you can select the favorite item and press the key.
Your browser will take you to the site.
Go to URL
ThismenuallowsyoutomanuallyentertheURLaddress
of a web site that you wish to access.
Section 11: t-zones
167
Clear Cache
Youcancleartheinformationstoredinthecache,whichis
the phone’s temporary memory which stores the most
recently accessed Web pages.
Press the Yes soft key to confirm the deletion. Otherwise,
press the No soft key.
168
Section 12: Health and Safety
Information
Topics Covered
• Health and Safety Information
• UL Certified Travel Adapter
• Consumer Information on Wireless Phones
• Road Safety
• Operating Environment
• Using Your Phone Near Other Electronic Devices
• Potentially Explosive Environments
• Emergency Calls
• FCC Notice and Cautions
• Other Important Safety Information
• Product Performance
• Availability of Various Features/Ring Tones
• Battery Standby and Talk Time
• Battery Precautions
• Care and Maintenance
This section outlines the safety precautions associated
with using your phone. These safety precautions should
be followed to safely use your phone.
Section 12: Health and Safety Information
169
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It
isdesignedandmanufacturednottoexceedtheexposure
limits for radio frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
government.TheseFCCexposurelimitsarederivedfrom
the recommendations of two expert organizations, the
National Counsel on Radiation Protection and
Measurement (NCRP) and the Institute of Electrical and
Electronics Engineers (IEEE). In both cases, the
recommendations were developed by scientific and
engineering experts drawn from industry, government,
and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile
phones employs a unit of measurement known as the
Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body
expressedinunitsofwattsperkilogram(W/kg).TheFCC
requires wireless phones to comply with a safety limit of
1.6 watts per kilogram (1.6 W/kg). The FCC exposure
limit incorporates a substantial margin of safety to give
additional protection to the public and to account for any
variations in measurements.
170
Health and Safety Information
SAR tests are conducted using standard operating
positions accepted by the FCC with the phone
transmitting at its highest certified power level in all
testedfrequencybands.AlthoughtheSARisdetermined
at the highest certified power level, the actual SAR level
of the phone while operating can be well below the
maximumvalue.Thisisbecausethephoneisdesignedto
operate at multiple power levels so as to use only the
power required to reach the network. In general, the
closeryouaretoawirelessbasestationantenna,thelower
the power output.
Before a new model phone is available for sale to the
public, it must be tested and certified to the FCC that it
does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in
positions and locations (e.g. at the ear and worn on the
body) as required by the FCC. For body worn operation,
this phone has been tested and meets FCC RF exposure
guidelines when used with an accessory that contains no
metalandthatpositionsthehandsetaminimumof1.5cm
from the body. Use of other accessories may not ensure
compliance with FCC RF exposure guidelines.
The FCC has granted an Equipment Authorization for
thismobile phonewithallreportedSAR levels evaluated
as in compliance with the FCC RF exposure guidelines.
The maximum SAR values for this model phone as
reported to the FCC are:
Section 12: Health and Safety Information
171
• Head: 1.07 W/Kg.
• Body-worn: 0.92 W/Kg.
SAR information on this and other model phones can be
viewed on-line at www.fcc.gov/oet/fccid. To find
information that pertains to a particular model phone,
this site uses the phone FCC ID number which is usually
printed somewhere on the case of the phone. Sometimes
it may benecessary toremove the battery pack to find the
number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website
anditshouldprovidevaluesfortypicalormaximumSAR
for a particular phone. Additional product specific SAR
information can also be obtained at www.fcc.gov/cgb/
sar.
UL Certified Travel Adapter
TheTravelAdapterforthisphonehasmetUL1310safety
requirements. Please adhere to the following safety
instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS
OUTLINED MAY LEAD TO SERIOUS PERSONAL
INJURY AND POSSIBLE PROPERTY DAMAGE.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR
ELECTRIC SHOCK, CAREFULLY FOLLOW THESE
INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN THE
U.S.A., USE AN ATTACHMENT PLUG ADAPTOR OF
172
Consumer Information on Wireless Phones
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has
published a series of Questions and Answers for
consumers relating to radio frequency (RF) exposure
from wireless phones. The FDA publication includes the
following information:
What kinds of phones are the subject of this update?
Thetermwirelessphonerefersheretohand-heldwireless
phones with built-in antennas, often called "cell,"
"mobile,"or"PCS"phones.Thesetypesofwirelessphones
canexposetheusertomeasurableradiofrequencyenergy
(RF)becauseoftheshortdistancebetweenthephoneand
theuser'shead.TheseRFexposuresarelimitedbyFederal
Communications Commission safety guidelines that
weredevelopedwiththeadviceofFDAandotherfederal
health and safety agencies. When the phone is located at
greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure
decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a
base unit connected to the telephone wiring in a house,
typically operate at far lower power levels, and thus
produce RF exposures well within the FCC's compliance
limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any
health problems are associated with using wireless
Section 12: Health and Safety Information
173
phones. There is no proof, however, that wireless phones
are absolutely safe. Wireless phones emit low levels of
radio frequency energy (RF) in the microwave range
while being used. They also emit very low levels of RF
wheninthestand-bymode.WhereashighlevelsofRFcan
producehealtheffects(byheatingtissue),exposuretolow
level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level
RFexposureshavenotfoundanybiologicaleffects. Some
studies have suggested that some biological effects may
occur, but such findings have not been confirmed by
additionalresearch.Insomecases,otherresearchershave
had difficulty in reproducing those studies, or in
determining the reasons for inconsistent results.
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of
radiation-emitting consumer products such as wireless
phones before they can be sold, as it does with new drugs
ormedicaldevices. However,theagencyhasauthorityto
take action if wireless phones are shown to emit radio
frequency energy (RF) at a level that is hazardous to the
user.Insuchacase,FDAcouldrequirethemanufacturers
ofwirelessphonestonotifyusersofthehealthhazardand
torepair,replaceorrecallthephonessothatthehazardno
longer exists.
Although the existing scientific data do not justify FDA
regulatory actions, FDA has urged the wireless phone
industry to take a number of steps, including the
following:
174
Consumer Information on Wireless Phones
• Support needed research into possible biological effects of RF
of the type emitted by wireless phones;
• Design wireless phones in a way that minimizes any RF
exposure to the user that is not necessary for device function;
and
• Cooperate in providing users of wireless phones with the best
possible information on possible effects of wireless phone use
on human health.
FDA belongs to an interagency working group of the
federal agencies that have responsibility for different
aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this
working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some
interagency working group activities, as well.
FDA shares regulatory responsibilities for wireless
phones with the Federal Communications Commission
(FCC). All phones that are sold in the United States must
comply with FCC safety guidelines that limit RF
exposure. FCC relies on FDA and other health agencies
for safety questions about wireless phones.
FCC also regulates the base stations that the wireless
phone networks rely upon. While these base stations
operate at higher power than do the wireless phones
Section 12: Health and Safety Information
175
themselves, the RF exposures that people get from these
base stations are typically thousands of times lower than
thosetheycangetfromwirelessphones. Basestationsare
thus not the primary subject of the safety questions
discussed in this document.
What are the results of the research done already?
The research done thus far has produced conflicting
results, and many studies have suffered from flaws in
their research methods. Animal experiments
investigating the effects of radio frequency energy (RF)
exposures characteristic of wireless phones have yielded
conflicting results that often cannot be repeated in other
laboratories. A few animal studies, however, have
suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However,
many of the studies that showed increased tumor
development used animals that had been genetically
engineeredortreatedwithcancer-causingchemicalssoas
to be pre-disposed to develop cancer in absence of RF
exposure. Other studies exposedtheanimals toRFfor up
to22hoursperday.Theseconditionsarenotsimilartothe
conditions under which people use wireless phones, so
we don't know with certainty what the results of such
studies mean for human health.
Three large epidemiology studies have been published
since December 2000. Between them, the studies
investigated any possible association between the use of
wireless phones and primary brain cancer, glioma,
meningioma, oracousticneuroma, tumorsofthebrainor
salivary gland, leukemia, or other cancers. None of the
studiesdemonstratedtheexistenceofanyharmfulhealth
176
Consumer Information on Wireless Phones
effects from wireless phones RF exposures. However,
noneofthestudiescananswerquestionsaboutlong-term
exposures,sincetheaverageperiodofphoneuseinthese
studies was around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and
epidemiologicalstudiesofpeopleactuallyusingwireless
phones would provide some of the data that are needed.
Lifetime animal exposure studies could be completed in
a few years. However, very large numbers of animals
would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies
can provide data that is directly applicable to human
populations, but ten or more years' follow-up may be
needed to provide answers about some health effects,
such as cancer. This is because the interval between the
time of exposure to a cancer-causing agent and the time
tumors develop - if they do - may be many, many years.
The interpretation of epidemiological studies is
hamperedbydifficultiesinmeasuringactualRFexposure
during day-to-day use of wireless phones. Many factors
affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology
Program and with groups of investigators around the
world to ensure that high priority animal studies are
Section 12: Health and Safety Information
177
conducted to address important questions about the
effects of exposure to radio frequency energy (RF).
FDA has been a leading participant in the World Health
OrganizationinternationalElectromagneticFields(EMF)
Project since its inception in 1996. An influential result of
this work has been the development of a detailed agenda
ofresearchneedsthathasdriventheestablishmentofnew
researchprogramsaroundtheworld.TheProjecthasalso
helpeddevelopaseriesofpublicinformationdocuments
on EMF issues.
FDA and Cellular Telecommunications & Internet
Association (CTIA) have a formal Cooperative Research
andDevelopmentAgreement(CRADA)todoresearchon
wireless phone safety. FDA provides the scientific
oversight, obtaining input from experts in government,
industry, and academic organizations. CTIA-funded
research is conducted through contracts to independent
investigators. The initial research will include both
laboratory studies and studies of wireless phone users.
The CRADA will also include a broad assessment of
additional research needs in the context of the latest
research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we
do not know that there is - it is probably very small. But if
you are concerned about avoiding even potential risks,
you can take a few simple steps to minimize your
exposure to radio frequency energy (RF). Since time is a
key factor in how much exposure a person receives,
178
Consumer Information on Wireless Phones
reducingtheamountoftimespentusingawirelessphone
will reduce RF exposure.
• If you must conduct extended conversations by wireless phone
every day, you could place more distance between your body
and the source of the RF, since the exposure level drops off
dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or
use a wireless phone connected to a remote antenna.
Again, the scientific data do not demonstrate that
wireless phones are harmful. But if you are concerned
about the RF exposure from these products, you can use
measures like those described above to reduce your RF
exposure from wireless phone use.
What about children using wireless phones?
Thescientificevidencedoesnotshowadangertousersof
wirelessphones,includingchildrenandteenagers. Ifyou
want to take steps to lower exposure to radio frequency
energy (RF), the measures described above would apply
to children and teenagers using wireless phones.
Reducing the time of wireless phone use and increasing
the distance between the user and the RF source will
reduce RF exposure.
Some groups sponsored by other national governments
have advised that children be discouraged from using
wirelessphonesatall.Forexample,thegovernmentinthe
United Kingdom distributed leaflets containing such a
recommendation in December 2000. They noted that no
evidence exists that using a wireless phone causes brain
tumors or other ill effects. Their recommendation to limit
wireless phone use by children was strictly
Section 12: Health and Safety Information
179
precautionary;itwasnotbasedonscientificevidencethat
any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believe that hands-free kits reduce risks. Hands-free kits
can be used with wireless phones for convenience and
comfort. These systems reduce the absorption of RF
energyintheheadbecausethephone, whichisthesource
of the RF emissions, will not be placed against the head.
On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part
of the body will absorb more RF energy. Wireless phones
marketed in the U.S. are required to meet safety
requirementsregardlessofwhethertheyareusedagainst
the head or against the body. Either configuration should
result in compliance with the safety limit.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF
emissions from wireless phones, there is no reason to
believethataccessories that claim toshieldtheheadfrom
thoseemissionsreducerisks.Someproductsthatclaimto
shield the user from RF absorption use special phone
cases, while others involve nothing more than a metallic
accessoryattachedtothephone.Studieshaveshownthat
these products generally do not work as advertised.
Unlike "hand-free" kits, these so-called "shields" may
interfere with proper operation of the phone. The phone
180
Consumer Information on Wireless Phones
may be forced to boost its power to compensate, leading
to an increase in RF absorption. In February 2002, the
Federal trade Commission (FTC) charged two
companies that sold devices that claimed to protect
wireless phone users from radiation with making false
and unsubstantiated claims. According to FTC, these
defendantslackedareasonablebasistosubstantiatetheir
claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can
interact with some electronic devices. For this reason,
FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac
pacemakers and defibrillators from wireless telephones.
This test method is now part of a standard sponsored by
the Association for the Advancement of Medical
instrumentation (AAMI). The final draft, a joint effort by
FDA, medical device manufacturers, and many other
groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers
and defibrillatorsaresafefromwirelessphoneEMI. FDA
has tested wireless phones and helped develop a
voluntary standard sponsored by the Institute of
Electrical and Electronic Engineers (IEEE). This standard
specifiestestmethodsandperformancerequirementsfor
hearing aids and wireless phones so that no interference
occurs when a person uses a compatible phone and a
compatible hearing aid at the same time. This standard
was approved by the IEEE in 2000.
Section 12: Health and Safety Information
181
FDA continues to monitor the use of wireless phones for
possible interactions with other medical devices. Should
harmfulinterferencebefoundtooccur,FDAwillconduct
testing to assess the interference and work to resolve the
problem.
Additional information on the safety of RF exposures
from various sources can be obtained from the following
organizations:
• FCC RF Safety Program:
http://www.fcc.gov/oet/rfsafety/
• Environmental Protection Agency (EPA):
http://www.epa.gov/radiation/
• Occupational Safety and Health Administration's (OSHA):
http://www.osha.gov/SLTC/radiofrequencyradiation/
index.html
• National institute for Occupational Safety and Health (NIOSH):
http://www.cdc.gov/niosh/topics/emf
• World health Organization (WHO):
http://www.who.int/peh-emf/
• International Commission on Non-Ionizing Radiation Protection:
http://www.icnirp.de
• National Radiation Protection Board (UK):
http://www.nrpb.org.uk
• Updated 4/3/2002: US Food and Drug Administration
http://www.fda.gov/cellphones
Road Safety
Your wireless phone gives you the powerful ability to
communicatebyvoice,almostanywhere,anytime.Butan
important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
182
Road Safety
When driving a car, driving is your first responsibility.
When using your wireless phone behind the wheel of a
car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such
as speed dial and redial. If available, these features help
you to place your call without taking your attention off
the road.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
3. Position your wireless phone within easy reach. Be able
to access your wireless phone without removing your
eyes from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
4. Let the person you are speaking with know you are
driving; if necessary, suspend the call in heavy traffic or
hazardous weather conditions. Rain, sleet, snow, ice and
even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while
driving. Jotting down a "to do" list or flipping through
your address book takes attention away from your
primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place
calls when you are not moving or before pulling into
traffic. Try to plan calls when your car will be stationary.
Section 12: Health and Safety Information
183
If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then
continue.
7. Do not engage in stressful or emotional conversations
that may be distracting. Make people you are talking
with aware you are driving and suspend conversations
that have the potential to divert your attention from the
road.
8. Use your wireless phone to call for help. Dial 9-1-1 or
other local emergency number in the case of fire, traffic
accident or medical emergencies. Remember, it is a free
call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1
or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see
a broken-down vehicle posing no serious hazard, a
broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen,
call roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely
when driving."
Formoreinformation,pleasecall1-888-901-SAFE,orvisit
our web-site www.wow-com.com
184
Operating Environment
ProvidedbytheCellularTelecommunications&Internet
Association.
Operating Environment
Remember to follow any special regulations in force in
any area and always switch your phone off whenever it
isforbiddentouseit,orwhenitmaycauseinterferenceor
danger. When connecting the phone or any accessory to
another device, read its user's guide for detailed safety
instructions. Do not connect incompatible products.
Aswithothermobileradiotransmittingequipment,users
are advised that for the satisfactory operation of the
equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over
your shoulder if you are using an external antenna).
Using Your Phone Near Other Electronic Devices
Mostmodernelectronicequipmentisshieldedfromradio
frequency (RF) signals. However, certain electronic
equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to
discuss alternatives.
Pacemakers
Pacemaker manufacturers recommend that a minimum
distance of 15 cm (6 inches) be maintained between a
wireless phone and a pacemaker to avoid potential
interference with the pacemaker.
Section 12: Health and Safety Information
185
These recommendations are consistent with the
independent research and recommendations of Wireless
Technology Research.
Persons with pacemakers:
• should always keep the phone more than 15 cm (6 inches) from
their pacemaker when the phone is switched on.
• should not carry the phone in a breast pocket.
• should use the ear opposite the pacemaker to minimize
potential interference.
If you have any reason to suspect that interference is
taking place, switch your phone off immediately.
Other Medical Devices
Ifyouuseanyotherpersonalmedicaldevices,consultthe
manufacturer of your device to determine if it is
adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this
information.Switchyourphoneoffinhealthcarefacilities
whenanyregulationspostedintheseareasinstructyouto
do so. Hospitals or health care facilities may be using
equipment that could be sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle. You should also
consultthemanufacturerofanyequipmentthathasbeen
added to your vehicle.
186
Potentially Explosive Environments
Posted Facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
Switchyourphoneoffwheninanyareawithapotentially
explosive atmosphere and obey all signs and
instructions. Sparks in such areas could cause an
explosion or fire resulting in bodily injury or even death.
Users are advised to switch the phone off while at a
refueling point (service station). Users are reminded of
the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution
areas),chemicalplantsorwhereblastingoperationsarein
progress.
Areas with a potentially explosive atmosphere are often
but not always clearly marked. They include below deck
on boats, chemical transfer or storage facilities, vehicles
using liquefied petroleum gas (such as propane or
butane), areas where the air contains chemicals or
particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn
off your vehicle engine.
Emergency Calls
Thisphone,likeanywirelessphone, operatesusingradio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee
connectioninallconditions. Therefore, youshouldnever
rely solely on any wireless phone for essential
communications (medical emergencies, for example).
Section 12: Health and Safety Information
187
Remember,tomakeorreceiveanycallsthephonemustbe
switched on and in a service area with adequate signal
strength. Emergency calls may not be possible on all
wireless phone networks or when certain network
services and/or phone features are in use. Check with
local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location
(for example, 911 or other official emergency number).
Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example),
youmayfirstneedtodeactivatethosefeaturesbeforeyou
can make an emergency call. Consult this document and
your local cellular service provider.
Whenmakinganemergencycall,remembertogiveallthe
necessary information as accurately as possible.
Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off
the call until given permission to do so.
Restricting Children's access to your Phone
Yourphoneisnotatoy.Childrenshouldnotbeallowedto
play with it because they could hurt themselves and
others,damagethephoneormakecallsthatincreaseyour
phone bill.
188
FCC Notice and Cautions
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can
require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane
orbutane)mustcomplywiththeNationalFireProtection
Standard (NFPA-58). For a copy of this standard, contact
the National Fire Protection Association, One
Batterymarch Park, Quincy, MA 02269, Attn: Publication
Sales Division.
Cautions
Any changes or modifications to your phone not
expressly approved in this document could void your
warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries,
antennas and chargers. The use of any unauthorized
accessories may be dangerous and void the phone
warranty if said accessories cause damage or a defect to
the phone.
Althoughyourphoneisquitesturdy, itisacomplexpiece
ofequipmentandcanbebroken.Avoiddropping,hitting,
bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the
phone in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the
device.
Section 12: Health and Safety Information
189
• Check regularly that all wireless phone equipment in your
vehicle is mounted and operating properly.
• Do not store or carry flammable liquids, gases or explosive
materials in the same compartment as the phone, its parts or
accessories.
• For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both
installed or portable wireless equipment in the area over the air
bag or in the air bag deployment area. If wireless equipment is
improperly installed and the air bag inflates, serious injury
could result.
• Switch your phone off before boarding an aircraft. The use of
wireless phone in aircraft is illegal and may be dangerous to
the aircraft's operation.
• Failure to observe these instructions may lead to the
suspension or denial of telephone services to the offender, or
legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on
the signal strength in your area. Your phone informs you
of the current signal strength by displaying a number of
bars next to the signal strength icon. The more bars
displayed, the stronger the signal.
Ifyou'reinsideabuilding, beingnearawindowmaygive
you better reception.
Understanding the Power Save Feature
If your phone is unableto finda signal after 15 minutes of
searching, a Power Save feature is automatically
activated. If your phone is active, it periodically rechecks
190
Product Performance
service availability or you can check it yourself by
pressing any key.
Anytime the Power Save feature is activated, a message
displays on the screen. When a signal is found, your
phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver.
When it's turned on, it receives and transmits radio
frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This
power can range from 0.006 watts to 0.2 watts in digital
mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized
personnel should service your phone and accessories.
Faulty service may void the warranty.
There are several simple guidelines to operating your
phone properly and maintaining safe, satisfactory
service.
• If your phone is equipped with an external antenna, hold the
phone with the antenna raised, fully-extended and over your
shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing
the internal antenna could inhibit call performance.
• Speak directly into the phone's receiver.
Section 12: Health and Safety Information
191
• Avoid exposing your phone and accessories to rain or liquid
spills. If your phone does get wet, immediately turn the power
off and remove the battery. If it is inoperable, call Customer
Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and
may require additional subscription and/or usage
charges. Not all features are available for purchase or use
inallareas.DownloadableRingTonesmaybeavailableat
an additional cost. Other conditions andrestrictions may
apply. See your service provider for additional
information.
Battery Standby and Talk Time
Standby and talk times will vary depending on phone
usage patterns and conditions. Battery power
consumption depends on factors such as network
configuration, signal strength, operating temperature,
features selected, frequency of calls, and voice, data, and
other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and
battery. If you suspect damage to the phone or battery, take it
to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses
less power; talk and standby time are greatly affected by the
signal strength on the cellular network and the parameters set
by the network operator.
192
Battery Precautions
• Follow battery usage, storage and charging guidelines found in
the user’s guide.
• Battery charging time depends on the remaining battery
charge and the type of battery and charger used. The battery
can be charged and discharged hundreds of times, but it will
gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to
buy a new battery.
• If left unused, a fully charged battery will discharge itself over
time.
• Use only Samsung-approved batteries and recharge your
battery only with Samsung-approved chargers. When a charger
is not in use, disconnect it from the power source. Do not leave
the battery connected to a charger for more than a week, since
overcharging may shorten its life.
• Do not use incompatible cell phone batteries and chargers.
Some Web sites and second-hand dealers, not associated with
reputable manufacturers and carriers, might be selling
incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier
recommended products and accessories. If unsure about
whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
• Extreme temperatures will affect the charging capacity of your
battery: it may require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity
and lifetime of the battery. Always try to keep the battery at
room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged.
Li-ion batteries are particularly affected by temperatures below
0 °C (32 °F).
• Do not place the phone in areas that may get very hot, such as
on or near a cooking surface, cooking appliance, iron, or
radiator.
Section 12: Health and Safety Information
193
• Do not get your phone or battery wet. Even though they will dry
and appear to operate normally, the circuitry could slowly
corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can
occur when a metallic object (coin, clip or pen) causes a direct
connection between the + and - terminals of the battery (metal
strips on the battery), for example when you carry a spare
battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not permit a battery out of the phone to come in contact with
metal objects, such as coins, keys or jewelry.
• Do not crush, puncture or put a high degree of pressure on the
battery as this can cause an internal short-circuit, resulting in
overheating.
• Dispose of used batteries in accordance with local regulations.
In some areas, the disposal of batteries in household or
business trash may be prohibited. For safe disposal options for
Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a
fire.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for many
years.
• Keep the phone and all its parts and accessories out of the
reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an
electric shock to you or damage to the phone.
194
Care and Maintenance
• Do not use or store the phone in dusty, dirty areas, as its
moving parts may be damaged.
• Do not store the phone in hot areas. High temperatures can
shorten the life of electronic devices, damage batteries, and
warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms
up to its normal operating temperature, moisture can form
inside the phone, which may damage the phone's electronic
circuit boards.
• Do not drop, knock or shake the phone. Rough handling can
break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or strong
detergents to clean the phone. Wipe it with a soft cloth slightly
dampened in a mild soap-and-water solution.
• Do not paint the phone. Paint can clog the device's moving
parts and prevent proper operation.
• Do not put the phone in or on heating devices, such as a
microwave oven, a stove or a radiator. The phone may explode
when overheated.
• If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized
antennas or modified accessories may damage the phone and
violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working
properly, take it to your nearest qualified service facility. The
personnel there will assist you, and if necessary, arrange for
service.
Section 12: Health and Safety Information
195
196
Standard Limited Warranty
What is Covered and For How Long? SAMSUNG
TELECOMMUNICATIONS AMERICA, L.P.
("SAMSUNG") warrants to the original purchaser
("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and
workmanship under normal use and service for the
period commencing upon the date of purchase and
continuingforthefollowingspecifiedperiodoftimeafter
that date:
Phone
1 Year
Batteries
1 Year
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
WhatisNotCovered?ThisLimitedWarrantyisconditioned
upon proper use of Product by Purchaser. This Limited
Warranty does not cover: (a) defects or damage resulting
from accident, misuse, abuse, neglect, unusual physical,
electrical or electromechanical stress, or modification of
any part of Product, including antenna, or cosmetic
damage; (b) equipment that has the serial number
removedormadeillegible;(c)anyplasticsurfacesorother
externally exposed parts that are scratched or damaged
duetonormaluse;(d)malfunctionsresultingfromtheuse
of Product in conjunction with accessories, products, or
198
Standard Limited Warranty
ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (e) defects or damage from
impropertesting,operation,maintenance,installation,or
adjustment; (f) installation, maintenance, and service of
Product, or (g) Product used or purchased outside the
United States or Canada. This Limited Warranty covers
batteries only if battery capacity falls below 80% of rated
capacity or the battery leaks, and this Limited Warranty
does not cover any battery if (i) the battery has been
chargedbyabatterychargernotspecifiedorapprovedby
SAMSUNG for charging the battery, (ii) any of the seals
onthebatteryarebrokenorshowevidenceoftampering,
or (iii)thebattery has been used in equipmentotherthan
the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable
warranty period, SAMSUNG will repair or replace, at
SAMSUNG's sole option, without charge to Purchaser,
any defective component part of Product. To obtain
service under this Limited Warranty, Purchaser must
return Product to an authorized phone service facility in
an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof
ofsaleshowingthedateofpurchase, theserialnumber of
Product and the sellers' name and address. To obtain
assistance on where to deliver the Product, call Samsung
Customer Care at 1-888-987-4357. Upon receipt,
SAMSUNG will promptly repair or replace the defective
Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components
when repairing any Product or replace Product with a
rebuilt, reconditioned or new Product. Repaired/
replaced leather cases, pouches and holsters will be
Section 13: Warranty Information
199
warranted for a period of ninety (90) days. All other
repaired/replacedProductwillbewarrantedforaperiod
equal to the remainder of the original Limited Warranty
ontheoriginalProductorfor90days,whicheverislonger.
All replaced parts, components, boards and equipment
shall become the property of SAMSUNG. If SAMSUNG
determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts,
shipping,andlaborchargesfortherepairorreturnofsuch
Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPTASSETFORTHINTHEEXPRESSWARRANTY
CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE
ARE NO CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR
ANY PARTICULAR PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE
PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF
ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING
THERETO.
NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN
200
Standard Limited Warranty
EXPRESS WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE
BY OPERATION OF LAW, INCLUDING IF
APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE HEREBY LIMITED TO
THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME
STATES/PROVINCES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED
WARRANTY LASTS, SO THE ABOVE LIMITATION
MAYNOTAPPLYTOYOU.INADDITION,SAMSUNG
SHALLNOTBELIABLEFORANYDAMAGESOFANY
KIND RESULTING FROM THE PURCHASE, USE, OR
MISUSE OF, OR INABILITY TO USE THE PRODUCT
OR ARISING DIRECTLY OR INDIRECTLY FROM THE
USE OR LOSS OF USE OF THE PRODUCT OR FROM
THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIALORSIMILARDAMAGES, ORLOSS
OF ANTICIPATED PROFITS OR BENEFITS, OR FOR
DAMAGES ARISING FROM ANY TORT (INCLUDING
NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR
EMPLOYEES, OR FOR ANY BREACH OF CONTRACT
OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES/
PROVINCES DO NOT ALLOW THE EXCLUSION OR
LIMITATIONOFINCIDENTALORCONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR
EXCLUSION MAY NOT APPLY TO YOU. THIS
Section 13: Warranty Information
201
WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS,
ANDYOUMAYALSOHAVEOTHERRIGHTS,WHICH
VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT
EXTENDTOANYONEOTHERTHANTHEORIGINAL
PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY
PORTION OF THIS LIMITED WARRANTY IS HELD
ILLEGALORUNENFORCEABLEBYREASONOFANY
LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS
LIMITED WARRANTY WHICH PURCHASER
ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS
LIMITED AS THE LAW PERMITS. THE PARTIES
UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN
CONJUNCTION WITH THE PRODUCT. SAMSUNG
MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR
IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT,
WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT
DISTRIBUTED BY SAMSUNG OR OTHERWISE,
INCLUDING THE ABILITY TO INTEGRATE ANY
SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES,
OPERATIONS, PERFORMANCE AND SUITABILITY
202
Standard Limited Warranty
OF ANY SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER
OF SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT, AS THE CASE MAY BE.
This Limited Warranty allocates risk of Product failure
between Purchaser and SAMSUNG, and SAMSUNG's
Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and
dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make
additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer
advertising or presentation, whether oral or written, do
not constitute warranties by SAMSUNG and should not
be relied upon.
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2006SamsungTelecommunicationsAmerica.Allrights
reserved.
No reproduction in whole or in part allowed without
prior written approval. Specifications and availability
subject to change without notice.
Section 13: Warranty Information
203
204
Ending a Call 22
Index
Making a Call 22
Making a Call from Phone-
book 23
Redialing Last Number 22
Silent Mode 29
A
ABC mode 46
Accessing a Menu Function
Call Records
Alert type 103
B
Backlight
description 18
settings 100
All calls 25
Call time 28
Delete all 27
Incoming calls 27
Missed calls 26
Outgoing calls 27
Battery
Caller ID 110
Camcorder 149
recording video 154
taking photos 150
Change password 112
Charging battery 8
charging 8
installing 8
low indicator 10
removing 6
Bluetooth
About 105
Features 106
Searching for new devices
D
Security modes 106
Turning Bluetooth On and Off
Dialing a Number
Phonebook 60
Visibility 106
SIM Card 63
Broadcast Messages 93
C
Calendar 137
Call Barring 109
Call Functions 21
Adjusting the Call Volume 24
Answering a Call 24
Dialing display 101
Display 19
backlight 18
icons 17
DTMF 33
E
Entering Text 45
Changing the Text Entry
Mode 46
Call Records 25
205
Using ABC Mode 47
Using Number Mode 51
Using Symbol Mode 51
Using T9 Mode 49
Menu Navigation 37
Menu Outline 39
Message settings 91
Message Tone 104
Messages 71
F
Fun & Apps 117
Functions and Options 29
G
Messaging
Types of Messages 72
Missed Call
Games 125
Viewing 26
Get More Help 20
Get more ringtones 102
Getting Started 5
Activating Your Phone 6
Voicemail 11
Multi-Party Call 34
Dropping One Participant 36
Private Conversation 35
Setting up 35
Mute 31
H
My Files 118
Health and Safety Informa-
My Namecard 65
My photos
tion 169
I
accessing pictures 157
Icons, description 17
Image editor 146
Instant Messaging 93
International Call 22
K
My Videos 159
N
Network Selection 109
Network Services
Call Barring 109
Call Forwarding 107
Call Waiting 109
Caller ID 110
Settings 107
Number mode 46
O
On/off switch, phone 10
Keypad Tone 103
L
Low battery indicator 10
M
Making a Call
Phonebook 23
206
Options
Settings 95
During a Call 31
Putting a Call on Hold 31
Bluetooth 105
Display 99
Network Services 107
Phone 97
Reset 115
Security 111
Sound 102
Organizer 135
Calculator 143
Calendar 137
Stopwatch 145
Task List 140
Timer 145
Time & Date 96
Voice recognition 133
Unit Conversion 144
World time 144
Shortcuts 38
Own Number 66
Silent mode 104
SIM card
installation 7
installing 6
P
Phone
icons 17
switching on/off 10
Soft Keys 29
Software update 114
Speakerphone 32
Speed Dial
Setting Up Entries 61
Standard Limited Warranty
Phone lock 112
Phone Settings 97
Phonebook
Searching for a Number 33
Picture Messages 76
PIN
Stopwatch 145
change 112
check 111
Storing a Number
phone’s memory 54
SIM card 55
Switching on/off
phone 10
Symbol mode 46
Push message
viewing in Inbox 85
R
Reset settings 115
Ring Volume 103
S
Safe Use of your phone 172
Security 111
Sentbox 87
T
T9 mode 46
Take and Send 150
Text input mode
207
changing 46
Text Messages 74
Timer 145
open applications 131
send text message 130
W
Warranty Information 197
Travel adapter 8
t-zones 164
Entering Text 165
Exiting 164
Navigating 165
U
Understanding Your Phone 13
View of Your Phone 14
Understanding Your Phone-
book 53
Finding a Phonebook Entry
Finding My Phone Number
Update your phone software
V
changing number 12
Voice Messages 72
Voice notes 72
Voice recognition 127
VoiceSignal
digit dial 128
features 128
menu 127
name dial 129
name lookup 131
208
|