SGH-T259 Series
P O R T A B L E
M O B I L E
User Manual
Q U A D - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
T9 Text Input is licensed by Tegic Communications and is covered by U.S. Pat. 5,818,437; U.S. Pat. 5,953,541; U.S. Pat. 6,011,554 and
other patents pending.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
®
Openwave is a registered Trademark of Openwave, Inc.
Dynamic Noise Suppression from Audience
Your phone is equipped with an advanced voice processing chip that delivers clear mobile calls by suppressing background noise,
intermittent sounds (like a siren or nearby conversation), and echoes, allowing you to hear and be heard nearly anywhere.
How Does It Work?
Based on the intelligence of the human hearing system, the technology:
•
•
Captures, evaluates and distinguishes all the sound signals surrounding your phone, and the person you're speaking with.
Then isolates the primary voice in conversation and filters out the background noise - so the person you're calling hears only your voice, without
disturbing background noise.
•
Dynamically equalizes and adjusts voice volume to optimize your calling experience, so you can hear clearly and don't need to speak louder to overcome
surrounding noise.
The noise suppression technology is built-in and already enabled in your new mobile phone. So it's ready to provide unsurpassed voice
clarity with every call.
Open Source Software
This product includes certain free/open source software. The exact terms of the licenses, disclaimers, acknowledgements and notices are
available on the Samsung's website:
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Selecting Functions and Options . . . . . . . . . . . . . . . . . . . . . . 22
Section 4: Menu Navigation .........................................28
Menu Navigation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Menu Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Templates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47
Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Messages settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Delete by folder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
1
Shortcut Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109
Messaging Key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Memory Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
Organizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Alarm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Voice Recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
2
Index ............................................................................ 148
Emergency Calls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
Wireless Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
Restricting Children's Access to Your Mobile Device . . . . . . . 138
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
Other Important Safety Information . . . . . . . . . . . . . . . . . . . 139
3
Section 1: Getting Started
This section explains how to start using your phone. Start by
configuring your hardware, activating your service, and then
setting up your voice mail.
Note: Instructions in this manual are based on default settings, and may vary
from your phone, depending on the software version on your phone,
and any changes to the phone’s Settings.
Understanding this User Manual
The sections of this manual generally follow the features of your
phone. A robust index for features begins on page 148.
Unless stated otherwise, instructions in this User Manual start with the
phone unlocked, at the Home screen.
All screen images in this manual are simulated. Actual displays may
vary, depending on the software version of your phone and any
changes to the phone’s Settings.
Also included is important safety information that you should
know before using your phone. This information is available near
the back of the guide, beginning on page 121.
Special Text
Throughout this manual, you’ll find text that is set apart from the
rest. These are intended to point out important information, share
quick methods for activating features, to define terms, and more.
The definitions for these methods are as follows:
This manual provides navigation instructions according to the
default display settings. If you select other settings, navigation
may be different.
Unless otherwise specified, all instructions in this manual
assume you are starting from the Home screen and using the
available keys.
•
Notes: Presents alternative options for the current feature, menu, or
sub-menu.
•
•
Tips: Provides quick or innovative methods, or useful shortcuts.
Important: Points out important information about the current feature
that could affect performance.
•
Warning: Brings to your attention important information to prevent
loss of data or functionality, or even prevent damage to your phone.
4
Text Conventions
Activating Your Phone
This manual provides condensed information about how to use
your phone. To make this possible, the following text conventions
are used to represent often-used steps:
When you subscribe to a cellular network, you are provided with
a plug-in SIM card containing subscription details, such as your
PIN, available optional services, and many other service features.
Installing the SIM Card
➔
Arrows are used to represent the sequence of
selecting successive options in longer, or
repetitive, procedures.
Important!: The plug-in SIM card and its contacts information can be easily
damaged by scratching or bending, be careful when handling,
inserting, or removing this card.
Keep all SIM cards out of reach of small children.
LSK
RSK
Left Softkey (indicates the feature is available by
pressing the left softkey).
If necessary, switch off the phone by pressing and holding
until the power-off image displays.
Right Softkey (indicates the feature is available by
pressing the right softkey).
1. Remove the battery cover.
•
•
Press down (1).
While applying pressure, slide cover away from the speaker
grill (2).
Example: “From the Home screen, press Menu Key (LSK)
Bluetooth Turn Bluetooth on.”
➔
Settings
➔
➔
Getting Started
5
ꢀ
Note: If the card is not inserted correctly, the phone will not detect the SIM
card. Remove the battery and re-orient the card back into the slot.
4. Replace the battery:
2. Lift and remove the battery.
•
Insert the battery into the opening on the back of the phone, making
sure the connectors align (1).
3. Carefully slide the SIM card into the SIM card socket until
the card locks into place (3). Make sure that the card’s
gold contacts face into the phone and that the upper-left
angled corner of the card is positioned as shown.
•
Press the battery down until it clicks into place (2).
6
Installing or Removing the Memory Card
Your phone supports an optional memory card (microSD™) for
data storage of such things as music, pictures, video, or other
files. This type of memory card is designed for use with this
mobile phone and other devices.
ꢁ
ꢀ
Note: This phone supports memory cards of up to 32 GB capacity.
1. Use your fingernail to lift the memory card cover, then
rotate it downward.
2. Insert the microSD card into the slot (as shown) and push
lightly with your thumb or finger until you hear a light click
sound. Ensure the microSD’s gold contact pins face
downward and the card is placed so that the indentations
on the card face the same direction as those illustrated.
5. Reinstall the battery cover by sliding it back onto the phone
until you hear it securely click. Make sure the battery is
properly installed before switching on the phone.
Getting Started
7
Although you can use the phone while the battery is charging,
doing so will require additional charging time.
Note: You should fully charge the battery before using your phone for the first
time.
A standard battery allows up to 5.5 hours of talk time.
Important!: Talk and standby times and other specifications are provided by
the manufacturer and are approximate. Actual performance
varies based upon features or services used, network
configuration, signal strength, operating temperature, customer
use, and other factors.
1. With the battery installed, temporarily remove the plastic
cover on the right side of the phone and plug in the travel
charger’s connector into the jack.
3. Push the microSD card with your thumb or finger a second
time to eject it from the slot.
Important!: Verify that the handset battery is installed prior to connecting the
travel charger. If the battery is not installed and the travel
charger is connected the handset will power cycle continuously
preventing proper operation.
4. Rotate the memory card cover back to the closed position
and press it lightly.
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. A travel
charger, used for charging the battery, is included with your
phone. Use only approved batteries and chargers. Ask your local
Samsung dealer for further details.
8
2. Plug the charger’s power plug into a standard AC wall
Warning!: Failure to unplug the travel charger before you remove the battery,
outlet.
can cause damage to the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain; a warning tone sounds and the low battery message
repeats at regular intervals on the display. In this condition, your
phone conserves its remaining battery power, not by turning off
the backlight, but by entering the dimming mode.
When the battery level becomes too low, the phone automatically
turns off.
Switching the Phone On or Off
1. Press and hold
until the phone switches on.
2. If prompted to enter the phone password, use the keypad
Incorrect Correct
.
3. If prompted to enter a PIN, use the keypad to enter the PIN
Note: The previous illustration displays the incorrect method for connecting
the charger. If attempted, damage to the accessory port will occur
therefore voiding the phone’s warranty.
and press Confirm (LSK) or
. For further details, see
“Check PIN code” on page 107.
3. When charging is finished, first unplug the charger’s power
plug from the AC wall outlet and then disconnect the travel
charger’s connector from the phone then resecure the
plastic cover over the interface jack on the phone.
The phone searches for your network and after finding it,
the term “T-Mobile” displays on the upper left half of your
screen. Now you can make or receive calls.
Getting Started
9
Visual Voicemail
The display language is preset to English at the factory. To
Note: change the language, use the Language menu. For more
information, refer to “Language” on page 111.
Visual Voicemail gives you a quick and easy way to access your
voicemail. Now you can find exactly the message you are looking
for without having to listen to every voicemail message first. This
new feature periodically goes out to your voicemail, and gathers
the caller information from all of the current voicemails.
4. When you wish to switch off the phone, press and hold
until the power-off image displays.
Setting Up Your Voice Mail
Setting Up Your Visual Voicemail
For new users, follow the instructions below to set up voice mail:
Your device automatically transfers all unanswered calls to your
voicemail, even if your device is in use or turned off. You should
set up your voicemail and personal greeting as soon as your
device is activated.
1. From Home screen, press and hold
on the keypad.
You may be prompted to enter a password.
2. Follow the tutorial to create a password, a greeting, and
Enabling Your Visual Voicemail
1. From Home screen, press Menu ➔ Messaging ➔
Voicemail.
your name.
Note: These steps may be different depending on your network.
2. Press Yes (LSK) to setup your visual voicemail for the first
Accessing Your Voice Mail
time.
You can access your voice mail by either pressing and holding
on the keypad or by using the phone’s menu.
3. When connected to the online visual voicemail, select
Enable Visual Voicemail and follow the onscreen prompts.
Accessing Your Visual Voicemail
ᮣ
From Home screen, press Menu ➔ Messaging ➔
Voicemail.
10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Open View of Your Phone
The following illustrations show the main elements of your
phone:
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone.
1
15
•
•
•
•
•
•
•
•
•
2.0 Megapixel Camera with Camcorder
®
2.0 Bluetooth Wireless Technology
14
Expandable memory up to 32GB
MP3 Music Player
Visual Voicemail
2
13
12
3
4
Pre-loaded games
Picture and Text Messaging
Web enabled
Keypad
5
6
7
11
10
9
8
Understanding Your Phone
11
7. Special function keys allow you activate unique features
Keys
while in Home screen. In Home screen, if you press and
The following list correlates to the illustrations.
hold the
key, you can turn on the Vibration Mode.
1. Speaker allows you to hear the other caller and the
different ring tones or sounds offered by your phone.
Press and hold the
key to insert a Pause (P).
8.
during phone calls and allows other
Microphone is used
2. OK (Select) key allows you to accept the choices offered
callers to hear you clearly when you are speaking to them.
It is also used in making voice note recordings.
when navigating through a menu.
3. Left Soft key allows you to select soft key actions or menu
items corresponding to the bottom left line on the display
screen.
9. Alphanumeric keys allow you to enter numbers, letters,
and some special characters.
10. Cancel/Clear key deletes characters from the display. In
Menu mode, this key returns you to the previous menu
level.
4. Shortcut key customizable key that can be programmed
to launch your favorite application.
5. Send key allows you to make or answer a call. From Home
screen, recalls the last number dialed or received when
held down.
11. Power On/Off (Exit) key ends a call. Press and hold this
key for two seconds to turn your phone on or off. While in
the Menu mode, it returns the phone to Home screen and
then cancels your input.
6. Voice Mail key allows you to quickly access your voice
mail. Press and hold this key for two seconds to
12. Messaging key customizable key that can be
programmed to launch your favorite application. By
default, this key can be used to access your Messaging
menu.
automatically dial your voice mail’s phone number.
12
13. Right Soft key allows you to select soft key actions or
menu items corresponding to the bottom right line on the
display screen. It also provides quick access to your
phonebook.
Closed View of Your Phone
The following illustrations show the external elements of your
phone:
1.
Volume keys allow you to adjust the Ring volume in
standby mode (with the phone open) or adjust the Speaker
14. Navigation key scrolls through the phone’s menu options
and acts as a shortcut key from standby mode.
In Menu mode, scrolls through the phone’s menus and
Phonebook. From Home screen:
When receiving an incoming call, if
volume during a call.
you press the volume key, you can mute the ring tone. If
you press and hold the volume key, you can reject the call.
• Up key: allows you to directly access the Call history.
• Down key: allows you to directly access the Contact list.
• Left key: allows you to Create a Text message.
3
• Right key: allows you to create a new Audio Postcard.
5
Tip: When entering text, use the Left or Right Navigation key to mark the
1
position of the cursor.
4
6
15. Display shows all the information needed to operate your
phone, such as the received signal strength, phone battery
level, and time.
2
Understanding Your Phone
13
2. microSD Card Slot lets you use a microSD card to expand
Display Layout
the memory of your phone.
Your phone’s display screen provides a wealth of information
about your phone’s status and options. The display has 3 areas:
3. Camera lens as part of the built-in camera, you can take
pictures and shoot videos.
Icons
4. Front Display shows can be configured to display either a
Wallpaper (Clock or My image) or a Greeting message.
5. Power/Accessory Interface connector allows you to
connect a power cable or optional accessories, such as a
hands-free headset for convenient, hands-free
conversations.
CAUTION! Inserting an accessory into the incorrect jack
may damage the phone.
Soft function
Keys
6. Camera key lets you to take pictures when you are in
camera mode.
14
Icons
Missed Messages Tab
When you receive new messages, icons display in two locations,
on the phone’s screen, Missed Messages tab, and in the icon bar
at the top of the screen.
This list identifies the symbols you’ll see on your phone’s display
screen:
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Displays when connected to the EDGE network.
Missed Call
Displayswhenyourphoneiscommunicatingwiththe
EDGE network.
Displays that 3G data service is active.
Displays that 3G data service is now active and
communicating.
New Voicemail
New Messages
Shows the level of your battery. The more bars you
see, the more power remains.
Displays when a call is in progress.
Displays when the phone is not receiving a signal.
Understanding Your Phone
15
DisplaysintheViewTabwhenyoumissedamessage.
Displays when the phone is in Airplane mode.
Displays in the View Tab when you missed a
voicemail message.
Displays when Bluetooth wireless technology is
active.
Displays when a new text message is received.
Indicates the current call is Muted.
Displays when a new visual voicemail is received.
Displays when a new voicemail is received.
Indicates the current call is Unmuted.
Displays when USB communication is active.
Displays when a new picture message or Audio
postcard is received.
DisplayswhentheCallForwardingfeatureisactive.For
more details, see “Call Forwarding” on page 116.
Displays when a microSD is detected and was
properly installed.
Displays when Silent Mode is active. All incoming
sounds are turned off.
Displays when Vibration Mode is active. The ringer is
set to vibrate only.
Displays in the View Tab when you missed a call.
16
Backlight
Display
A backlight illuminates the internal display and the keypad. When
you press any key, the backlight comes on. It goes off when no
keys are pressed within a given period of time, depending on the
setting within the Backlight time menu. The display turns off after
one minute to conserve battery power.
Your phone has a display on the front of the phone (when closed).
It indicates when you have an incoming call or message. It also
alerts you at a specified time when you have set an alarm. The
backlight turns on and the corresponding icon displays on the
screen.
The On setting is how long the keypad backlight is on. The Dim
option is how much longer after the keypad backlight goes off
that the display remains lit.
The display shows the current time on a digital clock.
Help
Help is designed to work with the browser to show you some of
the unique features of your phone. You can search help files on
the fly while traveling, at home or anywhere.
To specify the length of time the backlight is active, access the
Backlight time menu:
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Backlight time and press Select (LSK) or
2. Select the On option. Choose from 5 sec
and press
.
Web, Downloads, and My Account.
,
15 sec or 30 sec
For more information on browser options, see “web2go” on
page 61.
.
3. Select the Dim option. Choose from Off 5 sec, 15 sec, or
,
30 sec and press
4. Press Save (LSK) to retain your new settings.
Understanding Your Phone
17
Section 3: Call Functions
explains the featuresandfunctionality associated with makingor
answering a call. For more information on ringtones see “Sound
profiles” on page 99. For more information, refer to “Call
Forwarding” on page 116.
Correcting the Number
1. Press
To clear any other digit in the number, press the Left or Right
Navigation key until the cursor is immediately to the right of the digit
to clear the last digit displayed.
•
to clear and then press
. You can also enter a missing digit.
Making a Call
2. Press and hold
to clear the entire display.
ᮣ
From the (LSK), enter the desired number and
press
.
ᮣ
When you want to finish your call, briefly press
.
Note: When you activate the Auto redial option (within the Call settings
menu), the phone automatically redials up to 10 times when the
recipient does not answer your call or is already on the phone,
provided your call is not sent to voicemail. For more information, see
“Auto redial” on page 115.
Redialing the Last Number
The phone stores the numbers of the calls you’ve dialed,
received, or missed if the caller is identified.
Making an International Call
1. From the Home screen, press and hold
To recall any previously dialed numbers:
1. If you entered characters on the display, press
return to Home screen.
to
. The +
character displays.
2. Press the Up Navigation key to display the Call history
screen (calls are displayed in the order you dialed or
received them).
2. Enter the country code, area code, and phone number.
3. Press to make the call.
18
3. Use the Up and Down Navigation keys to scroll through the
numbers and highlight the number you want. With the
entry highlighted from the Call history screen press
Options (LSK) to display the following options:
Making a Call from the Phonebook
You can store regularly used phone numbers into the phone’s
memory or onto your SIM card. These entries are collectively
called the Phonebook.
Once you have stored a number in Contacts, you can dial it by
pressing only a few keys. You can also assign your most
frequently-used numbers to number keys using the Speed Dial
feature.
• Call: Places a call back to the number.
• Send message: Allows you to send a Message or Audio postcard.
• Save to contacts: Allows you to save the selected phone number
to the Contacts list.
Adjusting the Call Volume
• Delete: Allows you to delete the selected number or all call records.
During a call, use the Volume keys on the left side of the phone,
to adjust the speaker volume.
• View contact details: Allows you to view the details of a call log
entry that is already in your current Contacts list.
ᮣ
Press the Up volume key to increase the volume level and
4. To view details of the highlighted number, press View
Down volume key to decrease the level.
(
). Before you dial the number, you may also press
Options (LSK) to display the following options:
Tip: From Home screen, you can also adjust the ring volume using these
• Send message: Allows you to send a Message or Audio postcard.
keys.
• Save to contacts: Allows you to save the selected phone number
to the Contacts list.
Answering a Call
• Delete: Allows you to delete the selected number or all call records.
When somebody calls you, the phone rings and displays the
incoming call image. The caller’s phone number, or name if
stored in Contacts, is then displayed.
• View contact details: Allows you to view the details of a call log
entry that is already in your current Contacts list.
5. Press
to dial the number.
Call Functions
19
1. Press
If the Any Key answer option is enabled within the Answer options
menu (Menu ➔Settings Call settings Answering mode
and
or Accept (LSK) to answer the incoming call.
All calls
•
This menu lets you view the 90 most recent calls you received,
dialed, missed, or voicemail. The name or number, if already
stored in your Contacts, displays with the number of occurrences
for each number.
➔
➔
)
you can press any key to answer a call except
Reject (RSK).
When you view the numbers in this list, the phone icon to the left
of the number indicates the call type:
Note: To reject an incoming call, press Reject (RSK) or
2. Press
.
•
•
•
Answered: Indicates any received calls that were answered.
Missed: Indicates any missed calls.
Dialed: Indicates all outgoing calls made from your phone.
to end the call.
Note: You can answer a call while using the Contacts or menu features. After
ending the call, the phone returns to the function screen you were
previously using.
Answered Call: Indicates any received calls that
were answered.
Call history
All missed, dialed and answered calls are listed in the Call history
screen. This list of your call history is continually updated as new
numbers are added to the beginning of the list and the oldest
entries are removed from the bottom of the list.
Missed Call: Indicates any missed calls. These
are routed to your voicemail.
Dialed Call: Indicates all outgoing calls made
ᮣ
From Home screen, press Menu (LSK) ➔ Call history.
from your device.
Note: While on the Home screen, press the Up Navigation key to scroll
between the following Call history tabs: All calls, Missed calls,
Dialed calls, Answered calls, and Voice mail.
Voicemail: Indicates any received calls that
were not answered and sent
directly to your voicemail.
20
2. Press View (LSK) or press
. The number
Note: At any time while you are in Call Records, you may use the Left or
Right Navigation keys to scroll between All calls, Missed calls,
Dialed calls, Answered calls, and Voice mail.
corresponding to the most recently missed call displays, if
available. If only one missed call has occurred, the LSK
reads Call
.
Note: Recent Calls records only calls that occur while the phone is turned on.
If a call is received while your phone is turned off, it will not be
included in the phone’s call history. If you return a call from the
voicemail menu, it will not be included in your phone’s history.
– or –
Press the Up Navigation key to scroll through the missed
calls.
Missed calls
3. While in the Call history screen, scroll through the missed
This menu lets you view the 30 most recent calls you received,
but did not answer. The name and number, if already stored in
your Contacts, displays with the number of occurrences for each
number.
calls, press the Up or Down Navigation key.
4. Press
to call the displayed number.
– or –
When you are unable to answer a call for any reason, you can
find out who is calling you, if this service is available, so that you
can call the person back.
Press View
(
) to display the call details.
5. Press Options (LSK) to access the following options:
• Call: Places a call back to the number.
The number of missed calls displays on the Home screen on the
Missed Call/Messages tab, immediately after a call is missed.
• Send message: Allows you to send a Message or Audio postcard.
To view a missed call immediately:
1. If the display is off, press the Volume key to activate the
display.
• Save to contacts: Allows you to save the selected phone number
to the Contacts list.
• Delete: Allows you to delete the selected number or delete all call
records.
• View contact details: Allows you to view the details of a call log
entry that is already in your current Contacts list.
Call Functions
21
Vibration Profile
Tip: You can press
at any time to exit the Missed Call feature.
The Vibration audio profile is convenient when you wish to stop
the phone from making any noise, in a theater for example.
Dialed calls
From Home screen, press and hold
profile on” message and ( ) displays. In this Vibration profile,
instead of sounds, your phone vibrates. For more information,
until the “Vibration
This menu lets you view the most recent calls you dialed. The
name and number, if already stored to Contacts, displays with the
number of occurrences for each number.
refer to “Sound profiles” on page 99.
Answered calls
To exit and reactivate the previous sound settings, press and hold
This menu lets you view the 30 most recent calls you received.
The name and number, time and date, displays with the number
of occurrences for each number.
again until the “Normal profile on” message displays. The
Vibration profile icon (
) no longer displays.
Voicemail
Selecting Functions and Options
Your phone offers a set of functions that allow you to customize
it. These functions are arranged in menus and sub-menus,
accessed using the two soft keys. Each menu and sub-menu
allows you to view and alter the settings of a particular function.
This menu lets you view the 30 most recent voicemail calls you
received.
Delete all Call history entries
This menu allows you to delete all of the records in each call
record separately, or you can delete all of your call records at one
time.
Soft Keys
The roles of the soft keys vary depending on the function you are
currently using. The labels on the bottom line of the display just
above each key indicate their current role.
1. From the Home screen, press the Up Navigation key to
display Call history
2. Press Options (LSK) ➔ Delete
3. Press Yes (LSK) to delete all files.
.
The two available keys are Left Softkey (LSK) and Right Softkey
(RSK).
➔
All.
22
3. Press the Down Navigation key to view the next function or
Press the Right soft key to
access the web2go browser.
Press the Left soft key for
Menu mode.
highlight the next option on a list.
– or –
Press the Up Navigation key to move back to the previous
function or option on a list.
4. Press
the settings.
to exit the menu structure without changing
5. In some functions, you may be asked for a password or
PIN. Enter the correct code and press the Confirm (LSK)
or
.
Selecting Options
When you access a list of options, your phone highlights the
currently active option. If there are only two options, such as On/
Off or Enable/Disable, your phone highlights the option that is
not currently active, so you can select it.
To view the various functions and options available, you must
press an available softkey and select an option by:
1. Press the appropriate soft key.
Options During a Call
2. Press Select (LSK) to select the function or the highlighted
Your phone provides a number of control functions that are
available for use during a call.
option.
– or –
Press the Back soft key to move back up one level in the
menu structure
Call Functions
23
Switching off the Microphone (Mute)
To place a call on hold:
1. Press Options (LSK) ➔ Hold.
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
2. Press Resume (RSK) to reactivate the call whenever you
want.
Example: You wish to say something to a person in the room but do not want
the person on the phone to hear you.
To make a new call while you have a call in progress:
1. While in a call, press Options (LSK) ➔ New Call to dial the
second call. The first call is automatically placed on hold.
– or –
To switch the microphone off temporarily:
ᮣ
Press Mute (
The other person can no longer hear you. The Mute icon
) at the left of the screen.
To switch the microphone back on:
Press Unmute ( ). The other person can hear you
) displays atop the current
)
Press the Options (LSK) ➔ Hold. This places the currently
(
active call on hold and allows you to make a new call.
ᮣ
2. Enter the new phone number that you wish to dial or look it
again.The Unmute icon (
call information
up in the Contact list.
3. Make the second call in the normal way.
Putting a Call on Hold
When you have both an active call and a call on hold, you may
switch between the two calls by placing the current held call to
active and then placing the other on hold.
You can place a current call on hold and make a new outbound
call if your network supports this service.
24
To switch between the two calls:
2. With the Contacts entries displayed, enter the name to
locate in the field above the entries. If you enter the first
few letters of the name, the Contact entries list starting
with the first entry matching your input.
– or –
1. Press the Options (LSK) ➔ Swap. The current active call
is placed on hold and the call on hold is reactivated so you
can continue talking.
2. Press
to finish and end each call normally.
Use the Up or Down Navigation key to highlight a contact.
Using the Speakerphone
While on a call, you can use your Speakerphone by following
these steps:
highlighted entry.
1. Press Spkr on (RSK).
For further details about the Contact feature, see “Finding a
2. Press Spkr off (RSK) to turn the Speakerphone off.
Contact Entry” on page 53.
Call Waiting
Important!: For safety information related to speakerphone use, see
You can answer an incoming call while you have a call in
progress, if this service is supported by the network and you
must have previously set the Call waiting option to Activate. For
more information, refer to “Call Waiting” on page 117.
“Responsible Listening” on page 134.
Searching for a Number in Contacts
You can search for a number in Contacts during a call.
You are notified of an incoming call by a call waiting tone.
1. During an active call, press Options (LSK) ➔ Contacts.
Call Functions
25
To answer a new call while you have a call in progress:
1. Press either Accept (LSK) or to answer the
3. Enter the number of the second participant and press
or press Call (LSK). The first call is automatically
placed on hold.
incoming call. The first call is automatically placed on hold.
2. Press Options (LSK) ➔ Swap to switch between the two
4. To join the first participant to this multi-party call, press
calls.
Options (LSK) ➔ Join.
3. Press Options (LSK) ➔ End ➔ Held call option to end a
Note: These first two calls are then grouped together on screen and
call on hold.
displayed in the order in which the calls were made.
4. Press
to end the current or remaining call.
Having a Private Conversation With One Participant
Making a Multi-Party Call
When you have two participants in a multi-party session, you
might be necessary to place one of those participants on hold so
that a private conversation can be held with a single caller. While
you are in a multi-party call:
A multi-party call is a network service that allows up to six
people to take part simultaneously in a multi-party or conference
call.
For further details about subscribing to this service, contact
T-Mobile customer service.
1. While in a multi-party call, press Options (LSK) ➔ Split.
2. Highlight the number of the caller with which you want to
Setting up a Multi-Party Call
talk privately and split and press
caller is placed on hold.
. The remaining
Note: A maximum of two callers can be joined to a single multi-party line.
You cannot create two multi-party calls.
3. Start your private conversation with the selected caller.
1. Call the first participant in the normal way.
Note: You can now talk privately to that person while the other participants
can continue to converse with each other. If there is only one other
participant, that person is then placed on hold.
2. Press Options (LSK) ➔ New call.
26
4. To return to the multi-party call, press Options (LSK) ➔
Join. Each of the multi-party call participants can now
hear each other again.
Dropping One Participant
1. While in a multi-party call, press Options (LSK) ➔ End ➔
Select participant.
2. Highlight the desired participant to drop and press
to place a checkmark alongside their entry.
3. Press Drop (LSK) to drop the participant.
4. Press
to end the multi-party call.
Call Functions
27
Section 4: Menu Navigation
This section explains the menu navigation for your phone.
Accessing a Menu Function by Scrolling
Menu Navigation
1. In Home screen, press Menu (LSK).
You can tailor the phone’s range of functions to your needs using
menus and sub-menus. Menus and sub-menus can be accessed
by scrolling using the Navigation keys or by using shortcuts.
2. Scroll using the Navigation keys to reach a Main menu (for
example: Settings). To activate an onscreen option, press
either Select (LSK) or
.
Menu Design
The main menu displays as a Grid menu with three rows and
three columns.
3. If the menu contains sub-menus, (for example:
Personalize). Press either Select (LSK) or
to enter
the menu.If the menu you selected contains further
options, repeat this step.
4. Press the Up or Down Navigation keys to scroll through
the menus.
5. Press either Select (LSK) or
to confirm the chosen
setting.
6. Press Back or
7. Press to exit the menu without changing the
settings.
to return to the previous menu level.
28
Using Shortcuts
The menu items, such as sub-menus, and options, are numbered
and can be accessed quickly by using their shortcut numbers.
Within the main menu’s Grid view, you can access any one of
menus or sub-menus by pressing the number keys (1 to 0)
corresponding to their location on the screen.
Example: Accessing the Security menu.
1. In Home screen, press Menu (LSK).
2. Press
3. Press
4. Press
5. Press
Settings.
Personalize
.
Phone settings
.
Security.
Menu Navigation
29
Section 5: Entering Text
This section outlines how to select the desired text input mode
whenenteringcharacters. Thissectionalsodescribeshowtouse
theT9predictivetextsystemtoreducethenumberofkeystrokes
associated with entering text.
•
•
Numeric: this mode allows you to enter numbers.
Symbol: this mode allows you to enter symbols, such as punctuation
marks.
When you are in a field that allows characters to be entered, the
text input mode indicator displays on the bottom right of the
screen.
Changing the Text Input Mode
When using your phone, you often need to enter text, such as
when storing a name in Contacts, creating your personal greeting
or scheduling events on your calendar. You can enter
Example: Writing a text message.
alphanumeric characters by using your phone’s keypad.
Your phone has the following text input modes accessible via the
right softkey (RSK):
•
ABC mode: this mode allows you to enter letters by pressing the key
labeled with the letter you want.
•
T9 (English): this mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one letter;
Current Text
Mode
for example, pressing
can enter G, H, or I. However, the T9
mode automatically compares the series of keystrokes you make with
an internal linguistic dictionary to determine the most likely word, thus
requiring far fewer keystrokes than the traditional ABC mode.
30
1. Press
(RSK) to change the text input mode.
Example: To enter “Hello” in T9 mode, press the
4,
3
,
5
,
5
, and keys.
6
2. Scroll to the mode you prefer and press Select (LSK) or
. The text input mode indicator displays the new
selection in the lower right corner of your display. The
following options are available:
The word that you type displays on the screen and may
change with each consecutive key press due to the
internal linguistic dictionary.
•
•
•
•
ABC
2. Enter the whole word before editing or deleting the
T9 (English)
Numeric
Symbol
keystrokes.
3. When the word correctly displays, go to step 4.
If the word doesn’t display correctly, press
to
3. When the Text input mode indicator displays your selected
display alternative letter choices for the current key you
pressed.
mode, enter text within the text message.
Using T9 Mode
T9 is a predictive text input mode that allows you to enter any
character using single keystrokes. This text input mode is based
on a built-in dictionary.
Example: Both the words “Of” and “Me” use the 6 and 3 keys. The phone
displays the most commonly used choice first.
4. Press
to accept the currently displayed word, insert
Entering a word in T9 mode
a space, and start entering the next word.
1. When you are in T9 mode (T9 Eng), start entering a word by
pressing the 2 to 9 keys. Press each key only once for each
letter.
Deleting characters in T9 mode
ᮣ
Press
once to delete a previous character.
– or –
Note: Pressing the key enters additional characters.
1
Press and hold
to clear the display.
Entering Text
31
Adding a new word into the T9 dictionary
Entering additional T9 characters
1. After pressing the keys corresponding to the word you
To enter periods, hyphens, apostrophes, and other special
characters:
want to add, press
to display alternative words.
ᮣ
Press
➔
to cycle through these available
If the last alternative word is not recognized by the
dictionary, the screen displays Spell on the bottom left
line.
characters (see “Keys” on page 33.) T9 mode applies
grammar rules to ensure that correct punctuation is used.
To shift case in T9 mode:
1. Press . There are 3 cases: Initial capital (Abc),
Capital lock (ABC), and Lower case (abc). The case
3. Enter the word you want to add using ABC mode. For more
information, refer to “Changing the Text Input Mode” on
page 30.
displays in the upper, right corner of the screen.
2. Enter the next character using the new case. You can move
4. Press Add (LSK) or
after you finish entering the new
the cursor by using the Navigation keys.
word.
To delete letters:
The word is added to the T9 dictionary and becomes a
word for the associated keypress series.
ᮣ
Press
once to delete a previous character.
– or –
Note: This feature may not be available for some languages. The
1
key has
Press and hold
to clear the display.
some emoticons associated with it. To enter other special characters
within the T9 mode, press and hold
characters.
to cycle through these
32
To delete letters:
Using ABC Mode
ᮣ
Press
once to delete a previous character.
To enter text in ABC mode:
– or –
1. Press
(RSK) to change the text input mode.
Press and hold
to clear the display.
2. Scroll to the ABC mode and press Select (LSK) or
.
Use the 2 to 9 keys to enter your text.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
3. Press the key labeled with the letter you want. Once for the
first letter, twice for the second letter, and so on.
To enter periods, hyphens, apostrophes, and other special
characters:
Keys
By default, the first letter of an entry is capitalized and all
consecutive letters are kept in lowercase (unless the Shift key is
used). After a character is entered, the cursor automatically
advances to the next space after two seconds or when you enter
a character on a different key. Characters scroll in the following
order (lowercase characters shown in parentheses):
ᮣ
Repeatedly press
to cycle through periods,
hyphens, apostrophes, and other special characters. ABC
mode applies grammar rules to ensure correct
punctuation.
To shift case in ABC mode:
Press to shift case in ABC mode. There are 3 cases:
Initial capital (Abc), Capital lock (ABC), and Lower case
abc). The case displays in the upper, right corner of the
ᮣ
. @ , : ? - ! ' / 1
A B C 2 (a b c 2)
D E F 3 (d e f 3)
P Q R S 7 (p q r s 7)
T U V 8 (t u v 8)
(
screen. You can move the cursor by using the Navigation
keys.
W X Y Z 9 (w x y z 9)
Entering Text
33
To enter text in Symbol mode:
G H I 4 (g h i 4)
J K L 5 (j k l 5)
0 (press and hold)
(Adds a space)
1. Press
(RSK) to change the text input mode.
2. Scroll to the Symbol mode and press Select (LSK)
Symbol (press and hold)
or
.
3. Use the Navigation key to select an onscreen symbol set
M N O 6 (m n o 6)
Shift (Toggles
Lower/Uppercase)
and press the corresponding number key.
4. Press OK (LSK). The new symbol is inserted into your
message. Each onscreen symbol set offers different
symbols for each key.
Using the Numeric Mode
The Numeric mode enables you to enter numbers into a text
message.
5. To clear the symbol(s), press
. When the input field
To enter text in Numeric mode:
is empty, this key returns the display to the previous mode.
1. Press
2. Scroll to the Numeric mode and press Select (LSK)
or . Use the 2 to 9 keys to enter your text.
(RSK) to change the text input mode.
3. Press the keys corresponding to the digits you want to
enter.
Using Symbol Mode
Symbol mode enables you to insert symbols and punctuation
marks into text. To display a list of symbols press and hold
.
34
Section 6: Messaging
This section describes how to send or receive different types of
messages. It also explains the features and functionality
associated with messaging.
Icon area:
A new text message
was received.
A new voice message
was received.
Types of Messages
Your phone provides the following message types:
A new Picture message or Audio postcard
was received.
•
•
•
•
•
Email Messages
Text Messages
Picture Messages
Audio Postcard
Voicemail
View Tab area:
A call was missed.
A new message
was missed.
Display Icons for Messages
A new voicemail message was missed.
When your handset receives new messages, icons display on the
screen in two locations: on the View Tab that displays on the
lower portion of the screen, and on the top of the screen. The
following table outlines the Icons that appear within the Icon area
and View Tabs:
View Tab
The View Tab is an area that displays on the screen when a
missed call, message, or voicemail is sent to the phone.
The three View tabs that display icons are:
•
•
•
New messages
Missed calls
New Voice mail messages
Messaging
35
The Message icon (
) displays in the icon area when you
Icons
have received a new text message. When the memory is full, the
message icon flashes on your phone and you cannot receive any
new messages. You must delete a message before you can
receive additional messages. This type of message must first be
retrieved from T-Mobile’s before it can be viewed.
The
unretrieved text messages that are stored on your SIM card. The
Message icon ( ) displays once you have successfully
retrieved and opened a new text message.
displays in your Message inbox list to indicate any
View Tab
(displays Missed calls,
Picture messages,
Audio postcards,
or Voice messages)
ᮣ
Use the Options (LSK) ➔ Delete function in each message
box to erase obsolete messages.
Creating a Simple Text Message
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Create message.
You can search through missed calls or unviewed messages by
using the Right and Left navigation keys to select the associated
message tab, then pressing the associated left softkey (View
,
Call, or Dial).
2. Highlight the To field and enter a phone number.
Text Messages
– or –
Short Message Service (SMS) allows you to send and receive
short text messages to and from other mobile phones. In
addition, your phone supports the Enhanced Messaging Service
(EMS), which enables you to include simple graphics, melodies,
and animated images in your messages. To use this feature, you
must subscribe to T-Mobile's message service.
3. Highlight the To field and press Add
(
) to add a
recipient and choose from one of the following:
• Recent recipients: allows you to select from recipients of your
previous messages.
36
• Contacts: allows you to enter the phone number you want from
5. Press Options (LSK) when you finish entering your
Contacts.
message. The following options are available:
• Groups: allows you to select a group.
• Add recipients: allows you to add Recent recipients, Contacts, or a
Group.
–
–
Highlight an option and press Select (LSK) or
.
Highlight and entry and press Add (LSK) or
to place a
• Insert: allows you to insert a Text template, a Text emoticon,
Contacts, or Bookmarks into this message.
checkmark alongside it.
• Add attachment: allows you to add an attachment such as: a File,
Name card, Appointment, Anniversary event, Private, Holiday,
Important, Tasks, Memo, or Bookmarks. When an attachment is
detected, the message is changed into a picture message.
– or –
Press the Options (LSK) and select one of the following:
• Add recipients: allows you to add Recent recipients, Contacts, or a
Group.
• Copy & Paste: turns on the text selection feature so you can copy
and paste text.
• View recipients: allows you to view and add a recipient from the
Recipient list.
• More: allows you to configure one of the following:
–
–
–
Add page: allows you to add a page to this message. The message is
then changed into a picture message.
• Exit composer: exits the composer and displays the Create new
screen.
Sending options: allows you to set the Reply path or Request delivery
report sending option.
Note: Your recipient must reside in Contacts before you can add the recipient
to this message.
Select language: allows you to set the language for this message.
Choices are: Français, or Español.
4. Highlight the text field and create your message.
• Save to: saves this message to either the Drafts or Templates folder.
• Exit composer: exits the composer and displays the Create new
screen.
Note: For further details about entering characters, see “Changing the Text
Input Mode” on page 30.
6. Press Send
(
) to send the current message.
Messaging
37
Creating and Sending a Picture Message
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Create message.
Picture Messages
This menu allows you to use the Multimedia Message Service
(MMS) to create a Picture messages.
Picture Messaging is a messaging service that provides delivery
of personal picture messages from phone to phone or from
2. Highlight the To field and enter a phone number.
– or –
phone to email. The Picture messaging icon (
) displays in
3. Highlight the To field and press Add
(
) to add a
the icon area when you have received a new text message.
recipient and choose from one of the following:
In addition to the familiar text content available via traditional text
messages, picture messages can contain images, graphics,
voice, and audio clips.
• Recent recipients: allows you to select from recipients of your
previous messages.
• Contacts: allows you to enter the phone number you want from
A Picture Messaging message is a multimedia presentation
contained in a single file. It is not a text file with attachments.
Contacts.
• Groups: allows you to select a group.
– or –
This type of message must first be retrieved from T-Mobile’s
before it can be viewed. The
inbox list to indicate any unretrieved picture messages. The
Message icon ( ) displays once you have successfully
displays in your Message
Press the Options soft key and select one of the following:
• Add recipients: allows you to add Recent recipients, Contacts, or a
Group.
retrieved and opened a new picture message.
Using the Picture Messaging feature, your phone can receive and
send messages that contain multimedia files, such as photos,
sounds and images that you downloaded from the Internet and
voice notes you recorded. This function is available only if it is
supported by your service provider. Only phones that offer picture
messaging features can receive and display picture messages.
• View recipients: allows you to view and add a recipient from the
Recipient list.
• Exit composer: exits the composer and displays the Create new
screen.
38
• Insert: allows you to insert a Text template, Text emoticon,
Contacts, or Bookmarks. The Text templates allow you to apply one
of the preset message templates to the text. Select one of the 10
items stored in the Text templates menu. Contact allows you to
add names and phone numbers to your message. Bookmarks
allows you to add Internet addresses to your message.
Note: Your recipient must reside in Contacts before you can add the recipient
to this message.
4. Highlight the text field and create your message.
5. Press the Down Navigation key, then use the Left and Right
• Add attachment: allows you to attach a File, Name card,
Appointment, Anniversary, Private, Holiday, Important, Tasks,
Memo, or Bookmarks to the message.
Navigation keys to add one of the following:
• Record sound: record a voice note to attach to this message.
• Add sound: attach a sound file or voice list from the Sounds folder.
• Add picture: attach a photo from the Photos folder.
• More: allows you to Add a page, Add subject, Edit style, Sending
options, or Select a language (Français, or Español) for this
message.
• Take picture: activate the camera so you can take a picture and
attach it to this message.
• Save to: save the message to your Drafts or Templates folder.
• Exit composer: exits the composer and displays the Create new
• Add video: activate the camcorder so you can take a video and
attach it to this message. You can also attach a video from the
Videos folder.
screen.
7. Press Send
(
) to send the current picture message.
Message Inbox
Note: For more information about entering characters, see “Using ABC
Mode” on page 33. You can enter up to 2000 standard Alphabet
characters per page in your message. The message can be up to 20
pages in length.
The Message inbox stores received messages. You can tell what
kind of message it is by the icon displayed. If the open envelope
icon displays then the message was read, otherwise the closed
envelope icon displays. The following types of messages may
display in your Message inbox:
6. After adding the attachment, press Options to set options
for this message:
•
•
•
Text messages stored on the SIM card
Text messages stored on the phone
Picture messages
• Preview: allows you to view the message prior to sending.
• Add recipients: allows you to add Recent recipients, Contacts,
Groups. or send this message to the Online Album.
Messaging
39
•
Audio Postcard
• Forward: allows you to forward the text message to another
person.
When you enter the Message inbox, the list of messages displays
with the sender’s phone numbers, or names, if available in your
Contacts. After you read the message, the open envelope icon
displays.
• Save to Contacts: saves the selected contact information to
Contacts.
Note: The Save to Contacts feature displays only if the contact information is
not already saved to Contacts.
Note: Press the Left or Right Navigation keys to scroll between Message
inbox, Sentbox, Drafts, and
Picture message templates).My folders
, and Templates (Text and
• Delete: deletes the selected text message, multiple messages, or
all messages.
• Lock/Unlock: Lock protects the current message from deletion.
ᮣ
From Home screen, press Menu (LSK) ➔ Messaging ➔
Unlocking a message leaves it available for deletion.
Message inbox.
• More: provides the following additional options:
Viewing a Text Message from the Message inbox
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Message inbox.
–
Move to phone/SIM card: allows you to move the message from the
SIM card into the phone’s memory or moves the message from the
phone to the SIM card. Depends on where the current message was
saved.
2. Select a text message from the list and press View
(
)
–
–
Move to my folder: allows you to move a message stored on the
phone to a different folder location.
to view the contents.
– or –
Sort by: allows you to sort messages by Read/Unread, Date, Sender,
Type, Subject, Size, or Lock/Unlock.
From the message list, press Options (LSK) and select one
3. Press Reply (
) to send a reply message.
of the following:
– or –
Press Options (LSK) while reading a text message to
• Reply: allows you to send a reply to the sender by sending a
message.
display the following:
• Call sender: Places a call back to the number.
40
• Call sender: places a call back to the number.
From the message list, press Options (LSK) and select one
• Forward: allows you to forward the message to another number.
of the following:
• Save to contacts: saves the selected contact information to
• Reply: send a reply to the sender by sending a message.
• Call sender: call the sender of the message.
Contacts.
• Delete: allows you to delete the message.
• Forward: forward the message to another number.
• Delete: delete the Selected, Multiple, or All messages.
• Lock/Unlock allows you to protect the message stored on the
:
phone, from being deleted or unlock it for deletion.
• Lock/Unlock: lock the picture message to prevent deletion or
unlock it to allow deletion.
• Save to templates: allows you to save the selected message as a
Text Message template.
• More
:
• More
–
–
Move to my folders: move the picture message to a personal folder.
–
Move to phone/SIM card: allows you to move the message from the
SIM card into the phone’s memory or from the phone onto the SIM card.
Depends on where the current message was saved.
Sort by: allows you to sort messages by Read/Unread, Date, Sender,
Type, Subject, Size, or Lock/Unlock.
–
–
Move to my folder: allows you to move a message stored on the
phone to a different folder location.
–
Properties
Subject, Received date, From, To, Cc, Size, and Priority.
3. Press Play/Pause ( ) to play or pause the multimedia
:
shows you information about the message, such as
Print via Bluetooth: allows you to print the message using a Bluetooth
enabled printer.
message. Press Stop (LSK) to stop the playback.
Viewing a Picture Message from the Message inbox
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Message inbox.
– or –
Press Options (LSK) while reading a text message to
display the following:
2. Highlight an retrieved (opened) picture message
• Reply
• Call sender
• Forward allows you to forward the message to another number.
Messaging 41
:
send a reply to the sender by sending a message.
from the list and press View
(
) to view the contents.
:
allows you to call the sender back.
– or –
:
• Replay: allows you to review the picture message.
1. Press View
(
) to view the picture message.
• Save to contacts saves the selected contact information to
:
– or –
Contacts.
Press Exit (RSK) if you want to view the message later in
• Delete
:
deletes the selected picture message.
allows you to save message media to your Image
the Message inbox.
• Save media
:
folder, Video folder, Sound folder, vCard, vCalendar. vNote, or Other
file folder.
– or –
Press Options (LSK) to access the various options
• Lock/Unlock allows you to protect the message from deletion or
:
previously described.
unlock it for deletion.
• Save to templates: allows you to save the selected message as a
2. Press
Social Buzz
when you are finished.
Text Message template.
• More
:
This menu item lets you log in to your social networking
applications (Twitter, Facebook, or Myspace) and get automatic
status updates for each of these applications.
–
–
Move to my folders: move the picture message to a personal folder.
Print via Bluetooth: allows you to print the message using a Bluetooth
enabled printer.
–
Properties
:
shows you information about the message, such as
ᮣ
From Home screen, press Menu (LSK) ➔ Media
➔
Games
Subject, Received date, From, To, Cc, Size, and Priority.
and Apps ➔ Social Buzz.
Viewing a Picture Message When You Receive It
For more information, refer to “Social Buzz” on page 55.
When a new picture message comes in, the icon area displays
the Picture Messaging Message icon (
).
Note: The message can also be displayed as a missed Picture message.
42
• Save in contacts: allows you to save number to Contacts.
• Copy to: allows you to copy voice sound to phone or memory card.
• Sort by: allows you to sort the voicemail inbox by Date, Sender, Played, or
Voicemail
This menu helps you access your voice mailbox, if provided by
your network. You can also setup Voicemail from this menu.
Duration
.
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
• Voicemail settings: allows you to record a greeting, change your
PIN, or activate the voicemail feature.
Voicemail.
2. At the prompt, press Yes (LSK), if you want to set up your
• Call voicemail: dials the voice mailbox.
Voicemail, or No (RSK) to reject VVM.
• Sync now: synchronizes with the voicemail inbox and displays
recent voicemail messages.
3. Select Voicemail again from the Messaging menu.
Voicemail settings
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
4. Press Options (LSK) to access the following application
options:
Voicemail.
• Voicemail settings: allows you to record a greeting, change your
PIN, or activate the voicemail feature.
Important!: You must have previously activated your account to use this
• Call voicemail: dials the voice mailbox.
feature.
• Sync now: synchronizes with the voicemail inbox and displays
recent voicemail messages.
2. Press Options (LSK) ➔ Voicemail settings
.
– or –
3. Select Record greeting Change PIN, or Deactivate now
,
.
Highlight a listed voicemail message and press Options
(LSK) to access the following voicemail message options:
• Reply: allows you to call or send message to sender.
• Delete
:
deletes the selected or multiple voicemail messages.
• Forward via: allows you to forward via Message or Email.
Messaging
43
4. Press Add voice
(
) to add a recorded voice note to
Email
this postcard.
ᮣ
From Home screen, press Menu (LSK) ➔ Messaging ➔
E-mail to view received email messages.
5. Press Stop (LSK) when you finish recording the voice
message.
The first time you select Email, a Welcome message displays.
Follow the onscreen prompts.
6. Press Send to
(
) ➔ Options (LSK) and select one of
the following options:
Note: Confirm your email settings if you experience any issues with sending
or receiving email.
• Add recipients: allows you to select recipients from one of the
following sources:
Audio Postcard
In this menu you can select a frame, take a picture, insert the
image into an available screen frame, and then record a voice
message up to one minute long and send it as an Audio Postcard.
–
–
Recent recipients: allows you to select from recipients of your
previous messages.
Contacts: allows you to enter the phone number you want from
Contacts.
–
–
Groups: allows you to select a group.
Creating an Audio Postcard
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Online Albums: send the postcard to an online album.
• Change Recipients: allows you to enter additional Cc (carbon copy)
or Bcc (Blind copy) recipients.
Audio postcard
.
• Back: returns you to the previous screen.
7. Press Add (LSK) and continue adding additional recipients.
– or –
2. Use the Right of Left navigation keys to cycle through the
available picture frames.
3. Center a subject in the frame and press Camera
(
) or
Press Send
(
) after you select your recipients.
the Camera key to take a photo for the postcard. The photo
is saved to the Photos folder.
44
Listening to an Audio Postcard from the Message inbox
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Message inbox.
• Save to templates: allows you to save the selected message as a
Picture Message template.
• More
:
–
–
Move to my folders: move the Audio Postcard to a personal folder.
2. Highlight an Audio Postcard
from the list and press
) to view the contents.
) to play or pause the audio
Print via Bluetooth: allows you to print the message using a Bluetooth
View (LSK) or (
enabled printer.
–
Properties: shows you information about the Audio Postcard, such as
3. Press Play/Pause
postcard.
(
Subject, Received date, From, To, Cc, Size, and Priority.
Sentbox
– or –
This message box stores unsent messages. When you enter this
menu, the list of messages in the box displays with the
recipients’ phone numbers or names, if available in your
Phonebook.
From the open message, press Options (LSK) and select
one of the following:
• Reply
:
allows you to send a reply to the sender by sending a
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Message or Audio Postcard.
Sentbox.
• Call sender allows you to call the sender back.
• Forward allows you to forward the message to another number.
• Replay plays back your Audio Postcard.
• Save to contacts: saves the selected contact information to Contacts
• Delete deletes the selected Audio Postcard message.
• Save media allows you to save message media to your Phone or
Memory card Images and Sounds folders.
• Lock/Unlock allows you to protect the message from deletion or
unlock it for deletion.
:
:
Note: Press the Left or Right Navigation keys to scroll between Message
:
inbox, Sentbox, Drafts, My folders, and Templates
.
.
2. Select a message from the list and press View (
) to
:
view the message contents.
:
3. Press the Up or Down Navigation keys to scroll through
:
the contents.
Messaging
45
–
–
Sort by: allows you to sort the messages stored in this folder by Date,
Recipient, Type, Subject, Size, or Lock/Unlock.
Note: Press Options while reading a message to select alternate options.
Properties: shows you information about the draft message.
Drafts
– or –
This message box stores messages you may want to edit or send
at a later time. When you enter this menu, the list of draft
messages is displayed.
Press Edit (
) and alter the message contents.
3. Press Send (
) to send the message.
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
4. Press
to return to the Home screen.
Drafts.
Tip: While viewing a draft message, press Options to choose different
options. Options depend on the type of message.
Note: Press the Left or Right Navigation keys to scroll between Message
inbox, Sentbox, Drafts, My folders, and Templates
.
My folders
2. Highlight a message from the Drafts list and press Options
(LSK) to select from the following options:
Use My folders to manage and organize your messages and store
them on your phone.
• Send: allows you to send the draft message.
ᮣ
From Home screen, press Menu (LSK) ➔ Messaging ➔
• Preview: allows you to preview the multimedia contents of an MMS
message.
My folders.
Creating a new folder
• Delete: deletes the Selected, Multiple, or All messages.
1. Press Create (LSK).
• Lock/Unlock: locks the selected message to protect it from
deletion, or unlocks the message to allow deletion.
2. Enter the title of the folder and press the OK (LSK)
• More
:
or
.
–
Move to my folders: the draft message to a personal folder.
The newly created folder displays on the My folders screen.
46
4. Select the text message field to alter the template if
Templates
desired.
Besides entering message text using the keypad keys, you can
speed message composition by including copies of stored text
and/or image templates in your message.
5. Press Send
(
) when you are finished.
Creating a new Picture Message Template
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Templates ➔ Picture message templates.
ᮣ
From Home screen, press Menu (LSK) ➔ Messaging ➔
Templates.
The following options are available:
2. Press Create (LSK) to create a new template.
3. Highlight the Subject field and enter your text.
4. Highlight the text field and create your message.
–
–
Text templates
Picture Message templates
Sending a Text Message Template
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Templates ➔ Text templates.
5. Press the Down Navigation key, then use the Left and Right
Navigation keys to add one of the following:
2. Select a template from the Templates list and press Send to
• Record sound: record a voice note to attach to this message.
• Add sound: attach a sound file or voice list from the Sounds folder.
• Add picture: attach a photo from the Photos folder.
send the message.
3. Press Add
(
) and select from one of the following:
• Take picture: activate the camera so you can take a picture and
attach it to this message.
• Recent recipients: allows you to select a number or an address
from the last 10 destinations you entered.
• Add video: activate the camcorder so you can take a video and
attach it to this message. You can also attach a video from the
Videos folder.
• Contacts: allows you to enter the phone number you want from
Contacts.
• Groups: allows you to send this message to a group.
6. Press Save
(
) to store the new picture message
template.
Messaging
47
Sending a Picture Message Template
Settings
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Templates ➔ Picture message templates.
The Settings menu allows you to set various message options,
delete messages by folder, or check your phone’s memory
status.
2. Highlight a template from the Picture message templates
ᮣ
From Home screen, press Menu (LSK) ➔ Messaging ➔
list and press Options (LSK) ➔ Send.
Settings.
3. From the Create screen, highlight the To field, press
Messages settings
Options (LSK) and select one of the following options:
In this menu, you can set up a default text message or a picture
message. The last setting you accessed is automatically
activated for sending subsequent messages.
• Add recipients: allows you to select recipients from one of the
following sources:
–
–
Recent recipients: allows you to select from recipients of your
previous messages.
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
Contacts: allows you to enter the phone number you want from
Settings ➔ Messages settings.
Contacts.
2. Select an available option and press Select (LSK)
–
–
Groups: allows you to select a group.
or
.
Online album: allows you to select an online album entry.
•
Choose from: Text message
,
Text message center Picture
,
4. Select the text message field to alter the template if
message Voice mail, or Push message
,
.
desired.
5. Press Send
(
) when you are finished. The template
message is sent to the selected recipient(s).
48
Text message
•
•
•
•
•
Message size: allows you to set a size limit for your message: 30 KB,
100 KB, 300 KB, 600 KB, or 1M.
Centers around Text sending options. The following Sending
Options are available:
Request delivery report: when enabled, the network informs you
whether or not your message was delivered.
Request read report: when enabled, the network informs you when
your message is read.
•
Reply path: allows the recipient of your message to send you a reply
message using your message center, if your network supports this
service.
Keep a copy: when this option is enabled, a copy of your message is
stored.
•
Request delivery report: allows you to activate or deactivate the
report function. When this function is activated, the network informs
you whether or not your message was delivered.
Add my name card: allows you to add your name card to your
message.
Text message center
Receiving options
Sets the default method of text message transmission used by
the Text message center. The options are:
This option specifies the category of messages you want to
receive and allows you to set the following:
•
•
•
•
T-Mobile
Center 2
Center 3
Center 4
•
•
•
•
Send read report: when enabled, your phone sends a notification
back to the recipient indicating that your message was received.
Send delivery report: when enabled, the phone informs the network
whether or not your message was received.
Picture message
Sending options
Reject anonymous: automatically rejects messages with a category
of anonymous.
•
Priority: you can select the priority level of your messages. Selections
Reject advertisement: automatically rejects messages with a
category of advertisement.
are: Normal, High or Low.
•
Expiration: allows you to select the length of time for your message to
remain on the MMS server: Maximum, 1 day, 2 days, 1 week, 2
weeks, Custom time (hour).
Messaging
49
Auto resize image
Delete by folder
•
•
•
•
•
No Resize
100 KB
300 KB
600 KB
1MB
This menu allows you to delete all of the messages in each
message box. Or, you can also delete all of your messages in all
message boxes at one time.
Important!: Once messages are deleted, they cannot be recovered.
Default style
1. From Home screen, press Menu (LSK) ➔ Messaging ➔
•
•
Font color
Settings ➔ Delete by folder.
Font style (Small normal, Small bold, Small Italic, Medium normal,
Medium bold, Medium italic, Large normal, Large bold, or Large italic)
2. Press the Up or Down Navigation key to select a message
box to clear. To delete all of your messages, select the All
option.
•
•
Background color
Page duration (2 seconds, 5 seconds, 10 seconds, or a Custom time)
Voicemail
3. Highlight a message box to clear and press
to place
or remove a check mark next to your selection.
This menu displays the default phone number used for access of
phone’s remote voicemail.
4. Press Delete (LSK) to delete the marked objects.
Push Message
5. Press Yes (LSK) after you receive the Delete? Locked
•
Receiving options: you can specify whether to turn push message
reception On or Off
Service loading: you can specify whether to load this service:
messages? confirmation.
.
•
–
–
–
Always
Prompt
Never
50
Memory status
•
Voice mail
- Inbox
To view the memory status:
ᮣ
From Home screen, press Menu ➔ Messaging ➔
Settings ➔ Memory status and press Select (LSK)
or
.
You can view the amount of the allocated memory and the
memory available for picture messages.
The display shows the total space including the used and free
space. You can also view how much space and the number of
messages currently occupying each message box type:
•
Picture message
- Inbox
•
Text Message (saved on the phone)
- Phone
- Sentbox
- Drafts
- My folders
- SIM card
- Message inbox
- Sentbox
- Drafts
- My folders
•
Push message
- Phone
•
Configuration
- Phone
- Message inbox
- My folders
- Message inbox
- My folders
Messaging
51
Section 7: People
This section explains how to use and manage your Contacts list.
You can save phone numbers to your phone’s memory or to your
SIM card.
Note: When storing a Contacts list entry into your SIM card, note that only the
Name, and Number are saved. To save additional information for a
particular contact, such as notes, e-mail, etc., it is important to save
that Contact into your phone’s onboard memory.
Using the Contacts List
1. From Home screen, press Menu (LSK) ➔ People ➔
Storing a Number in the Phone’s Memory
Add new contact.
The default storage location for saving phone numbers to your
contacts is your phone’s built-in memory. As soon as the SIM
card is inserted into the handset, the phone synchronizes the
Contacts (using the Mobile backup feature) to the T-Mobile
network. Additional, new contact information stores directly to
the phone’s memory and synchronizes with T-Mobile’s network
during predetermined, timed intervals. For information on how to
change this setting, see “Save Contacts To” on page 58. Also,
numbers that were stored on your SIM card can later be copied
to your phone’s memory.
2. Enter a first name in the First name text box. Press the
Down Navigation key to tab to the next box. For further
details about how to enter characters, see “Using ABC
Mode” on page 33.
3. Enter a last name in the Last name text box.
4. Highlight a number type by pressing the Up or Down
Navigation key, then enter a number in the text box.
The following options are available:
Note: When you copy a phone number from your SIM card to your phone, the
number displays twice in your Contact list.
• Mobile: assigns the number entered to the Mobile entry.
• Home: assigns the number entered to the Home entry.
• Work: assigns the number entered to the Office entry.
• Others: allows you to enter an additional phone number for this
entry.
52
• Email: allows you to enter the email address for the contact.
• Group: allows you to assign this contact to a group.
1. From Home screen, press Menu (LSK) ➔ People ➔
Contacts.
• Picture ID: allows you to add a Picture ID assigned to the contact.
2. Highlight a Contacts entry and press Options (LSK) ➔
Copy to SIM card ➔ Select/Multiple. The SIM storage
location is then indicated as a value (Ex: 6/250).
– or –
• Ringtone: allows you to assign a Ringtone by choosing from one of
the following locations: Voice list, Sounds, or Music.
• Birthday: allows you to enter the contact’s birthday.
• Address: allows you to enter the address for the contact.
Highlight a Contacts entry and press Options (LSK) ➔
• Notes: allows you to enter additional information about the contact.
Up to 100 characters are allowed.
Copy to phone ➔ Select/Multiple.
5. Press Save (
) to store your selections.The number
saves to your selected destination and the new contact
information displays.
3. Press
to return to the Home screen.
Finding a Contact Entry
You can store phone numbers and their corresponding names
onto either your SIM card or phone’s built-in memory. They are
physically separate but are used as a single entity, called
Contacts.
6. Press
to return to the Home screen.
Copying a Contact Number
The default storage location for saving phone numbers to your
Contacts list is your phone’s built-in memory. To save a number
to your SIM card, you need to change the Default saving option
first.
Note: A Phone icon appears to the left of a Contact entry stored on the phone.
A SIM card icon appears to the left of an entry stored on the SIM card.
Note: When you copy a phone number from your SIM card to your phone (or
vice versa), the number displays twice in your Contact list.
Only the icon adjacent to the Contacts entry indicates where the entry
is stored (Phone or SIM).
People
53
1. From Home screen, press Menu (LSK) ➔ People ➔
• Assign speed dial: allows you to assign a speed dial key number to
the selected Contacts entry.
Contacts.
• Send namecard via: allows you to send your name card by way of
Message, Bluetooth enabled devices, or Email.
2. Enter the first few letters of the name in the text box. The
Contacts entries are listed, starting with the first entry
matching your input.
• Delete: allows you to delete the selected or multiple names and
numbers from your Contacts or delete all numbers. You are asked
to confirm your name and number deletion by pressing the Yes
(LSK). To cancel, press the No (RSK).
– or –
Press the Up or Down Navigation key until the entry you
• Print via Bluetooth: sends the contents of the selected contact to a
Bluetooth enabled printer.
want is highlighted.
• Mobile backup: allows you to view the Last sync you performed, or
view the About mobile backup information.
3. Once you locate the desired entry, press
to dial the
number.
– or –
4. Press View (
) to view contact information and select
one of the following options:
Press Options (LSK) to access the following options:
• Edit: allows you to edit the name and number fields in the entry.
You can also add an email address and notes.
• Edit: allows you to edit the Name and number for the selected
contact.
• Send: allows you to send a message to the selected number. You
may choose between message, audio postcard, or email.
• Send: allows you to send a message to the selected number. You
may choose between message, audio postcard, or email.
• Copy to phone/SIM card: copies the selected or all of the contacts
to the phone or SIM card. Depends on where the contact was
previously saved.
• New contact: takes you to the Add new contact menu.
• Call: places the call to the selected phone number.
• Send namecard via: allows you to send your name card by way of
Message, Bluetooth enabled devices, or Email.
• Copy to phone/SIM card: copies the selected or all of the contacts
to the phone or SIM card. Depends on where the contact was
previously saved.
54
• Delete: allows you to delete the selected or multiple names and
numbers from your Contacts or delete all numbers. You are asked
to confirm your name and number deletion by pressing the Yes
(LSK). To cancel, press the No (RSK).
Social Buzz
When you first open this application the Status screen displays.
After login to your social networking applications (Facebook,
Myspace, or Twitter), status updates display automatically in the
top box for any of your friends for each of these applications.
Your My Facebook status displays your status automatically as
you post. You can view a stream of updates from friends, as well
as your inbox or wall.
• Print via Bluetooth: sends the contents of the selected contact to a
Bluetooth enabled printer.
5. Press Call
(
) to dial the selected number.
Dialing a Number from Contacts
1. From Home screen, press Menu (LSK) ➔ Media
➔
Once you store phone numbers in People, you can dial them
easily and quickly by using the location numbers
Games and Apps ➔ Social Buzz.
assigned to them and listed in the Contacts.
2. Read the onscreen disclaimer and press Continue (LSK).
3. Read the onscreen End User License Agreement (EULA)
Note: If you cannot remember a location number, you must go into the
Contacts menu in the People menu to search for the entry by name.
For more information, refer to “Finding a Contact Entry” on page 53.
and press Accept (LSK).
4. Press the Left or Right Navigation key until the desired
social networking icon displays (Facebook, Myspace,
Twitter, or Social Buzz), then log in to the application.
2. Enter the location number for the contact you want to dial.
For more information, refer to “Finding a Contact Entry”
on page 53.
5. Press the Down Navigation key to sign in to the selected
social networking service.
People
55
6. Press More (RSK) once you are signed in to refresh the
screen, change settings, minimize the screen, exit, or view
help.
Configuring the Caller Groups Settings
1. Highlight the newly created group and press
.
2. Press Options (LSK) ➔ Group settings
.
7. Press
– or –
twice to exit the application.
3. Highlight the Picture field and press Select (LSK) or
to create a Picture ID for this new caller group. Select from
one of the following options:
Press
➔ Yes (LSK) when "Do you want to exit?"
displays to exit this application.
• Wallpapers: allows you to select a wallpaper image to use as a
Picture ID.
Caller Groups
Adding a New Caller Group
• Downloaded images: displays a list of downloaded images from
which to select as a Picture ID.
1. From Home screen, press Menu (LSK) ➔ People ➔
4. Highlight the Ringtone field and press Select (LSK) or
to create a ringtone for this new caller group. Select
from one of the following options:
Groups
2. Press Options (LSK) ➔ Add new group
3. Enter a name for the new group in the New group field and
press Options (LSK) ➔ Save
.
.
• Sounds: displays a list of sounds from which to select as a
ringtone.
.
• Voice list: displays a list of voice messages from which to select as
a ringtone.
5. Press Options (LSK) ➔ Save when you are finished.
6. Press
to return to Home screen.
56
5. Highlight the Ringtone field and press Change
(
) to
Editing a Caller Group
alter the ringtone. The following options are available:
1. From Home screen, press Menu (LSK) ➔ People ➔
Groups
.
• Sounds: displays a list of sounds from which to select as a
ringtone.
2. Scroll through the group list and highlight the group you
• Voice list: displays a list of voice messages from which to select as
a ringtone.
want.
3. Press Options (LSK) ➔ Rename group. Modify the text in
6. Press Options (LSK) ➔ Save when you are finished.
the Name text box.
7. Press
to return to Home screen.
– or –
Speed Dialing
Press Options (LSK) ➔ Delete group. Delete the selected
Once you store phone numbers from your Contacts list, you can
set up to 8 speed dial entries and then easily dial them whenever
you want, by pressing the associated numeric key.
group.
– or –
ᮣ
From Home screen, press and hold the speed dial numbers
assigned to keys (2 to 9).
Press Options (LSK) ➔ Group settings
4. With Group settings enabled, highlight the Picture field and
press Change ) to alter the Picture ID for this caller
.
Setting Up Speed Dial Entries
1. From Home screen, press Menu (LSK) ➔ People ➔ Speed
(
group. The following options are available:
dial.
• Wallpapers: allows you to select a wallpaper image to use as a
Picture ID.
2. Use the Navigation key to select an available keypad
number key to where you wish to assign the new speed-
dialing number, select from the 2 to 9 keys.
• Downloaded images: displays a list of downloaded images from
which to select as a Picture ID.
3. Press Assign (LSK) or
.
People
57
4. Highlight a contact entry number from the list and press
Select (LSK) or . You receive a Speed dial assigned
Note: The Phone and SIM card option from the Menu
➔
People
➔
Management ➔ View contacts from ➔ Phone and SIM card
option must be selected in order to access all Contacts.
confirmation and the Speed dial menu is displayed with
the number assigned to the number key highlighted.
Save Contacts To
5. Press
to return to the Home screen.
This option allows you to assign the default storage location for
new contacts. Choose from: Phone SIM card, Ask on saving.
,
Note: Memory location 1 is reserved for your Voice mail server number and
Copy All To
this speed dial location can not be changed.
You can copy all Contact entries from their current location to
either the Phone’s memory or the SIM card.
Management
The Management menu allows you to select where your
contacts are saved, copy your SIM contacts to your phone and
phone contacts to your SIM card, sort by contacts, delete your
contacts, or check your memory status.
1. From Home screen, press Menu (LSK) ➔ People ➔
Management ➔ Copy all to.
2. Highlight Phone or SIM card the press the Select (LSK) or
. By default, all the entries in the Contacts list on the
Phone or SIM card are selected.
ᮣ
From Home screen, press Menu (LSK) ➔ People ➔
Management.
3. Highlight each contact you want to copy and press
to place a check mark next to the entry or place a check
mark alongside All to copy all entries.
View Contacts From
This option allows you filter the displayed contacts and to select
the location from which you displayed available contacts
SIM card
,
Phone, or the Phone and SIM card
.
4. Press Copy (LSK) to copy the selected contacts to the
Phone or SIM card.
58
Delete all
1. From Home screen, press Menu (LSK) ➔ People ➔
Management ➔ Memory status.
Important!: Once contact entries are deleted, they cannot be recovered.
2. Select an available category (Phone SIM, or FDN) and free
,
This option allows you to delete all your contacts from the
Contacts.
space by navigating to the submenus and deleting
unnecessary information.
Deleting all of the Contact Entries
3. Press
to return to the Home screen.
Perform the following procedure to delete all your entries from
your phone’s memory.
My number
This function is a memory aid, which you can use to edit or
remove your own phone number. You can also edit the default
name assigned to your phone number.
Important!: Once contact entries are deleted, they cannot be recovered.
1. From Home screen, press Menu (LSK) ➔ People ➔
1. From Home screen, press Menu (LSK) ➔ People ➔ My
Management ➔ Delete all.
number.
2. Select All and when the Delete? confirmation message
displays, press Yes (LSK) to delete or press No (RSK) to
cancel.
2. Highlight the Name field and enter in desired text to name
your phone. Press and hold
entry.
to erase any current
3. Press
to return to the Home screen.
3. Press the Down Navigation, press
to erase the
Memory status
current entry and type in a new number if desired.
4. Press Save ) when finished.
You can check how many names and numbers are stored in the
Contacts, within the Phone, SIM and FDN. You can also see the
current storage capacity of the memory.
(
People
59
Note: If you later need to edit the information in these fields, highlight a field
and press Options (LSK) ➔ Edit
.
Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned
by your service provider. These numbers include emergency
numbers, customer service numbers and directory inquiries.
ᮣ
From Home screen, press Menu (LSK) ➔ People ➔
Service number. The service numbers are displayed.
60
Section 8: Media
This section outlines the media features available on your phone
such as the web2go browser, Games and Apps, photos, music,
images, sounds, videos, and other types of files.
The following options are available:
Home
Selecting this menu connects the phone to the network and loads
the web2go homepage.
web2go
This section outlines the web2go features available on your
phone. For more information, contact T-Mobile.
The content of the web2go startup homepage depends on your
Wireless Web service provider. To scroll through the screen, use
the Up and Down keys.
SM
web2go is a WAP (Wireless Application Protocol) browser
which provides you wireless access and navigation of the Web
using your phone.
To go to the startup homepage from any other screen in the
web2go, use the Home option. For more information on the
web2go menus, see “Selecting and Using Menu Options” on
page 62.
To access web2go via the menu, follow these steps:
ᮣ
From Home screen, press Menu (LSK) ➔ web2go.
– or –
ᮣ
From Home screen, press Menu (LSK) ➔ Media
➔
web2go ➔ Home.
From Home screen, press web2go (RSK).
Exiting web2go
Tip: From the Home screen you can also quickly press web2go (RSK) to
ᮣ
To exit the browser at any time, press
.
bypass the need to access the main menu.
Navigating web2go
1. To scroll through browser items, press the Up or Down
Important!: To use the web2go feature, JavaScript must be enable from your
phone’s browser settings menu (Menu
➔
web2go
➔
Browser
Navigation key.
settings
➔
Preferences and enable Run javascript).
2. To select browser items, press
.
Media
61
Selecting and Using Menu Options
3. To return to the previous page, press Back (RSK).
4. Press Back (RSK) until the startup Home page displays.
Entering Text in web2go
Various menus are available when you are using web2go to
navigate the Wireless Web.
To access the browser options menu:
When you are prompted to enter text, the currently active text
input mode is indicated on the screen. The following modes are
available:
Note: The menus may vary, depending on your version of web2go.
•
•
•
Upper-case character mode (ABC): allows you to enter upper-case
English characters.
1. From an active page, press Options (LSK) and select from
the following options:
Lower-case character mode (abc): allows you to enter lower-case
English characters.
• Reload: reloads the current page.
• Resize page: allows you to manually resize the page by sliding the
size bar to the left or right.
Number mode (123): allows you to enter numbers.
To change the text input mode, use the following procedures:
• Forward: pages forward one page
1. Press Right soft key (RSK) one or more times.
• Go to: navigates to the URL address, Homepage, Bookmarks,
History, or Saved page.
2. To enter a space, press
.
• Save: allows you to save the Image or Page.
3. To edit text, set the cursor to the right of the character(s) to
• Add to bookmarks: adds the current URL to Bookmarks.
be corrected.
• Send URL via message: sends the currently viewed URL to a
recipient as a message.
4. To delete current characters, press
as required.
• Page details: allows you to view details about the current page
such as: Title, Address, Size, MIME type, and Last updated.
5. Enter the correct character(s).
• Browser settings: various settings are available, see “Browser
Settings” on page 64.
62
• Exit browser: exits the browser page you are viewing and returns
to the Home page.
5. Highlight the newly created bookmark and press Options
(LSK) to access the following options:
Enter URL
• Edit bookmark: allows you to edit the address.
This menu allows you to manually enter the URL address of a
web site that you wish to access. For further details about
entering characters, see “Entering Text” on page 30.
• Delete: allows you to delete the selected address or multiple
addresses.
• Add bookmark: allows you to enter a new bookmark URL.
Bookmarks
• Send URL via message: allows you to send the selected bookmark
as a text message.
This menu stores up to 15 URL addresses.
• Set as homepage: allows you to set the selected bookmark as a
To store a URL address:
homepage.
1. From Home screen, press Menu (LSK) ➔ web2go ➔
6. Select a URL and press Go
(
). Your browser displays
Bookmarks.
the site.
– or –
Saved Pages
From Home screen, press web2go (RSK) ➔ Options (RSK)
This option displays a list of the pages that were saved while
navigating the browser.
➔ Go to ➔ Bookmarks.
2. Press Options (LSK) ➔ Add bookmark and press Select
History
(LSK) or
.
This option provides you with a list of the most recently visited
web sites. You can use these entries to return to previously
visited, but not bookmarked, web pages.
3. Enter a name for the bookmark in the Title text box and
press the Down key.
4. Enter the address in the URL text box and press Save
(
).
Media
63
Preferences
Browser Settings
Various settings are available when you are using the web2go
browser to navigate the wireless web. Choose from the following
options:
The Preferences option allows you to set web2go preferences
such as Run JavaScript, Display images, Play sound,
and View mode.
Clear cache
About Browser
You can clear the information stored in the cache, which is the
phone’s temporary memory and stores the most recently
accessed Web pages.
About Browser displays information about the browser such as
the type and version.
Games and Apps
Use Games and Apps to download MIDlets (Java applications that
run on mobile phones) from various sources using the browser
and store them in your phone.
ᮣ
Press Yes (LSK) to confirm the deletion. Otherwise, press
No (RSK).
Cookies
ᮣ
From Home screen, press Menu (LSK) ➔ Media
Games and Apps
➔
Use this option to select cookie mode or to delete cookies.
• Cookie mode: this mode allows you to Accept all cookies, Reject all
cookies, or Prompt you when a site wants to deposit a cookie.
.
When you access the Games and Apps menu, the list of default
games displays. Once you download new games, they are added
to the list.
• Delete cookies: deletes all currently stored cookies. Cookies
identify who you are when you visit favorite web sites; however, they
can also be used to track your web surfing habits.
To delete cookies:
ᮣ
Highlight Delete cookies and press Select (LSK) or
Yes (LSK) at the Delete cookies? prompt.
➔
64
Find Great Games
TeleNav GPS Navigator
You can download more games from the T-Mobile website by
TeleNav is a driving aid that uses both audible and visual
using the Find Great Games option.
directions for GPS navigation.
ᮣ
From Home screen, press Menu (LSK) ➔ Media
Games and Apps Find Great Games
➔
1. From Home screen, press Menu (LSK) ➔ Media ➔
➔
.
Games and Apps
➔
TeleNav GPS Navigator.
2. At the prompt, read the agreement and press ACCEPT (LSK)
to accept the terms, or press EXIT (RSK) to close the
window.
Note: When downloading games, charges may apply. MIDlet game options
differ depending on the MIDlet selected.
The Best Apps
Note: When accessing TeleNav Navigator, charges may apply.
You can download the best T-mobile applications from the
T-Mobile website using this feature.
Social Buzz
ᮣ
From Home screen, press Menu (LSK) ➔ Media
Games and Apps The Best Apps
➔
This menu item lets you log in to your social networking
applications (twitter, Facebook, or Myspace) and get automatic
➔
.
Note: When downloading applications, charges may apply.
ᮣ
From Home screen, press Menu (LSK) ➔ Media
➔
Games and Apps ➔ Social Buzz.
For more information, refer to “Social Buzz” on page 55.
Media
65
Google Maps
Photos
Google Maps allow you to track your current location, view
real-time traffic issues, and view detailed destination directions.
There is also a search tool included to help you locate places of
interest or a specific address. You can view locations on a vector
or aerial map, or you can view locations at the street level.
Use the Photos option, to manage photos saved on your phone.
1. From Home screen, press Menu (LSK) ➔ Media
➔
Photos.
When you access this menu, your phone displays the
photos in Line view (column), which shows them as small
images. Use the Navigation keys to scroll through the
photos.
Important!: Before using Google Maps you must have an active data (3G) or
connection. The Maps application does not cover every country
or city.
2. To view the photos on the full screen, press View
(
).
To go back to Line view, press Back (RSK).
1. From Home screen, press Menu (LSK) ➔ Media
➔
Photos Options
Games and Apps ➔ Google Maps.
1. While viewing the image, press the Options (LSK) to display
2. Read the Terms and Conditions and press Accept (LSK).
these options:
3. Press Menu (LSK) to configure the various settings and
• Send to My Album: allows you to send the selected photo to My
Album.
choose from the available functions.
4. Use the Navigation keys to recenter your location on the
• Send via: allows you to send the selected photo as a Message,
Email, Audio postcard, or to a Bluetooth enabled device.
map.
• Set as: allows you to set the photo as a Wallpaper, Front display, or
as a Picture ID.
Note: For your safety, do not use Google Maps or any other visual application
while driving.
• Default destination: allows you to Remove or Change the
destination folder for your photos.
• Delete: allows you to delete the currently active image.
• Rename: allows you to rename the photo.
66
• Edit image: allows you to take edit the current image by choosing
from features such as: Effects, Adjustments, Transformations,
Cropping, and Insertions.
4. Press Yes (LSK) to confirm the deletion.
5. Press
when you are finished.
• Bluetooth visibility: allows you to enable the photo so it is visible to
other Bluetooth devices. This option is available for a single photo
you are viewing, not selected or multiple photos.
My Album
My album is a private online picture album that you can use to
store and share pictures, videos, voice messages, and text. When
you take a photo, the phone prompts with Send to: My Album
Note: The Bluetooth visibility option appears for photos stored within the
Phone and not on the SIM card.
Online?
.
• Slide show: allows you to display all available images as part of an
onscreen slideshow where the images are cycled.
Note: When accessing My Album, charges may apply.
• Print via Bluetooth: allows you to send the selected photo to a
1. From Home screen, press Menu (LSK) ➔ Media ➔
Bluetooth enabled printer.
Photos ➔ My album.
• Lock/Unlock: allows you to lock the image to protect it from
deletion, or unlock it to allow deletion.
2. In your browser, select the Inbox Album link and press
Select (LSK) or
.
• Properties: allows you to view Basic details about the selected
image.
3. Use the Up or Down key to highlight a particular image
Deleting a Photo
and press
4. Press
to view the photos.
You can delete photos one by one or all at one time.
1. From the Photos menu, highlight the photo you want to
delete.
when you are finished.
2. Press Options (LSK) ➔ Delete
.
3. Select an available option: Selected
,
Multiple, or All.
Media
67
Camera
Wallpapers
Use your phone’s Camera to take photos of people or events
while on the move. Additionally, you can send these photos to
other people in a Picture Messaging message or set a wallpaper
or picture ID image.
Allows you to access the local default wallpaper images.
1. Select Wallpapers.
2. Press either View
screen
(
) to open the selected image full
For more information about using the Camera and features, see
“Using the Camera” on page 92.
– or –
Press Options (LSK) to select from available onscreen
Images
options.
In this menu, you can view the list of images downloaded from
the web server, taken with the built-in camera, or received in
messages. You can set an image as the current background
image.
• Set as: sets the image as Wallpaper, Front display, or as a Picture
ID.
• Take Photo: allows you to take a photo and use it as a wallpaper.
ᮣ
From Home screen, press Menu (LSK) ➔ Media ➔
Images. Choose from either: Fresh Wallpaper, Wallpapers,
or Downloaded images.
• Create folder: creates a new folder in which to contain your own
images.
• Sort by: lists the images by Date, Type, Name, or Size.
• Properties: displays the image name, format, resolution, size,
forwarding, date created, and location.
Fresh wallpaper
Using the Fresh Wallpaper option, allows you to access the
T-Mobile website and download new images to use as wallpaper
using the browser.
ᮣ
Highlight Fresh Wallpaper and press Connect
(
).
Note: When downloading wallpapers, charges may apply.
68
Downloaded images
• Bluetooth visibility: allows you to enable the image so it is visible
to other Bluetooth devices. This option is available for a single
image you are viewing, not selected or multiple images.
This menu allows you to access your downloaded images on
your phone.
Note: The Bluetooth visibility option appears for downloaded images stored
ᮣ
With the image highlighted within the list, press the
Options (LSK) to choose from the following options:
• Send to My Album: sends the selected image to My Album.
within the Phone and not on the SIM card.
• Print via Bluetooth: sends the selected image to a Bluetooth
printer.
• Send via: creates a message to send the image as a Message,
Email, Audio postcard, or to another Bluetooth device.
• Lock/Unlock: locks the image to protect it from deletion, or unlocks
it to allow deletion.
• Set as: allows you to set the image as a Wallpaper, Front display, or
Picture ID.
• Properties: displays Basic details or Media Information about the
image.
• Delete: erases the current image.
Music
• Move: moves the Selected, or Multiple images to another location.
• Copy: copies the Selected, or Multiple images to another location.
Your phone’s Music features allow you to play and manage the
music files stored on your phone.
• Default destination: Remove or Change the default destination for
images.
1. From Home screen, press Menu (LSK) ➔ Media
➔
Music.
• Rename: renames the image.
2. Select a music file and press Options (LSK) to choose from
• Take Photo: allows you to take another photo with the camera.
the following options:
• Create folder: allows you to create a new folder in which to store
• Send via: allows you to send the selected music file via Message,
images.
Email, or to a Bluetooth enabled device.
• Sort by: lists images by Date, Type, Name, or Size.
• Set as: allows you to set the music file as a Ringtone, Individual
ringtone, Alarm tone, Message tone, or as a Calendar reminder.
Media
69
• Delete: allows you to delete the Selected, Multiple, or All music
Music Player
Use Music Player to add music files or play music stored in your
files.
• Move: allows you to move the Selected music file or Multiple music
files to another location or folder.
playlist.
1. From Home screen, press Menu (LSK) ➔ Media
Music player
➔
Music
• Copy: allows you to copy the Selected music file or Multiple music
files to another location or folder.
➔
.
• Rename: allows you to rename the selected music file.
2. Select All tracks Artists, Albums, or Playlists and press
,
• Create folder: allows you to create a folder in which to store the
Open (LSK).
selected music file.
3. Highlight a music file, then press Options (LSK) and select
• Sort by: allows you to sort the music by Date, Type, Name, or Size.
one of the following options:
• Bluetooth visibility: allows you to select one or multiple music files
to share with other Bluetooth devices.
• Add to Playlist: allows you to add the Selected, Multiple, or All
music files to a playlist.
• Lock/Unlock: allows you to lock the music file to protect it from
deletion or unlocks it to allow deletion.
• List by: allows you to display music files by category such as:
Recently added, My rating, or Title.
• Properties: displays Basic details about the selected music file
such as Name, Format, Size, Forwarding, Date created,
and Location.
• Delete: allows you to delete the Selected, Multiple, or All music
files.
• Send via: allows you to send this music file as a Message, Email, or
to a Bluetooth device.
• Set as: allows you to set the music file as Ringtone, Individual
ringtone, Alarm tone, Message tone, or as a Calendar reminder.
• Properties: displays Basic details about the selected music file.
• Settings: set Background playing, and choose Sound effects and
Visualization settings.
70
4. Select a music file and press
to play the music.
OK key. Plays or pauses the music file, depending on
which mode is active.
During playback, press Options (LSK) for playback options:
• Transfer to Bluetooth stereo headset: sends audio via Bluetooth
Up Navigation key. One press accesses the Music
player listing of songs.
to a Bluetooth stereo headset.
• Set as: allows you to set the music file as Ringtones, Individual
ringtone, Alarm tone, Message tone, or as a Calendar reminder.
Down Navigationkeystopstheplaybackofthemusic
file.
• Send via: allows you to send this music file as a Message, Email, or
to a Bluetooth device.
Left Navigation key plays the previous music file
in the playlist. Press and hold to scrub back
through the current song.
• Rate track: select a rating of 0 to 5 stars for the track.
• Add to Playlist: allows you to add the current track to a playlist.
• Properties: displays Basic details about the music file.
Right Navigation key plays the next music file in the
playlist. Press and hold to scrub forward through the
current song.
• Settings: set Background playing, and choose Sound effects and
Visualization settings.
• Shortcuts: view keypad and navigation key shortcuts.
Up Volume key: Press to increase playback volume.
Music Player Shortcut Keys
Down Volume key: Press to decrease playback
volume.
While playing a music file you can use one of the following
shortcut keys to control the player.
Press to Rate the track, in stars (0-5). Each time you
press, the star rating increases.
1. From Home screen, press Menu (LSK) ➔ Media
Music player
2. Select a music file and press
➔
Music
➔
.
Press to change the Sound effects presets: NORM
(Normal), ROCK, POP, DANC (Dance), CLAS
(Classical), JAZZ, WIDE, DYNA (Dynamic sound), or
SURR (Surround sound).
to play the music.
3. While playing a music file, the following keys act as
shortcuts:
Media
71
Creating a Playlist
Press to toggle Shuffle mode On or Off.
Press to toggle Player modes:
1. From Home screen, press Menu (LSK) ➔ Media ➔
Music
➔
Music player
➔
Playlists.
2. Select Create playlist, enter a name for the playlist and
• Normal: songs are played in the order they
appear in the current list.
press Save (LSK).
Renaming a playlist
• Repeat one: repeats the current track, until you
stop playback.
1. From Home screen, press Menu (LSK) ➔ Media ➔
• Repeat all: repeats all songs in the current
playlist, until you stop playback.
Music
2. Highlight a playlist and press Options (LSK)
3. Press to delete the previous name.
➔
Music player
➔
Playlists.
➔
Rename.
4. Press
to exit and return to Home screen.
4. Enter a new name for this playlist and press Save (LSK) or
Playlists
.
There are ten available playlists. You can add music files to any
one of these playlists, and you can customize the playlists by
renaming them. You cannot, however, add a new playlist or
delete a playlist.
Adding Music Files to a Playlist
1. From Home screen, press Menu (LSK) ➔ Media
Music player
2. Highlight the playlist in which you want to add a music file
and press
3. Press Options (LSK)
➔
Music
➔
.
1. From Home screen, press Menu (LSK) ➔ Media
Music player
2. Highlight a playlist and press
➔
Music
➔
.
.
to open the playlist.
➔
Add
➔
Tracks.
72
4. Locate and highlight a music file then press
to place
Browse CallerTunes
a check mark next to the file(s) you want to add to this
playlist.
In this menu, you can view a list of CallerTunes and download
them for your phone.
1. From Home screen, press Menu (LSK) ➔ Media
➔
Sounds
5. Press Add (LSK) to add the music file(s).
®
➔
Browse CallerTunes
.
Sounds
2. A list of CallerTunes display.
In this menu, you can view the list of sounds downloaded from
the web server or received in picture messages. You can also set
a downloaded sound as the current ring tone.
3. Follow the prompts to download and purchase
CallerTunes.
ᮣ
From Home screen, press Menu (LSK) ➔ Media ➔
Sounds
Sounds.
Use Sounds to manage sounds on your phone.
Hottest Ringtones
ᮣ
Highlight an item in the Sounds menu and press Options
In this menu, you can view a list of the Hottest Ringtones offered
by T-Mobile.
(LSK). The following options are available:
• Set as: allows you to set the sound as an Ringtone, Individual
ringtone, Alarm tone, Message tone, or Calendar reminder.
1. From Home screen, press Menu (LSK) ➔ Media
Hottest Ringtones. A list of ringtones and other
downloads display.
➔
Sounds
➔
• Create folder: allows you to create a new folder to contain sounds.
• Sort by: allows you to sort sound files by: Date, Type, Name, or
Size.
2. Select a category of ringtones, select a ringtone, then
• Properties: displays the sound name, format, size, forwarding,
date created, location.
follow the prompts to download or purchase the ringtone.
Media
73
Voice list
Videos
The Voice list contains your recorded audio messages.
In this menu, you can record a video, or view a list of videos
downloaded from the web server or received within multimedia
messages. You can also view a video saved to your Videos folder
or memory card.
ᮣ
Highlight an item and press Options (LSK). The following
options are available:
• Send via: allows you to send this voice file as a Message, Email, or
to a Bluetooth enabled device.
1. From Home screen, press Menu (LSK) ➔ Media
2. Highlight a video clip from your Videos folder and press
Play ) to play it.
➔
Videos.
• Set as: allows you to set the voice file as Ringtones, Individual
ringtone, Alarm tone, Message tone, or Calendar reminder.
(
• Delete: deletes Selected, Multiple, or All voice files.
– or –
• Move: moves Selected or Multiple voice files to another folder.
• Copy: copies Selected or Multiple voice files to another folder.
• Rename: allows you to rename the selected voice file.
• Create folder: allows you to create a new folder for voice files.
• Sort by: sorts the voice files by Date, Type, Name, or Size.
Before you play the video, press Options (LSK) and select
one of the following:
• Send via: sends the video using a Message, Email, or to a
Bluetooth enabled device.
• Delete: deletes the Selected, Multiple, or All video files.
• Bluetooth visibility: makes Selected or Multiple voice files visible to
a Bluetooth device.
• Move: allows you to move the Selected or Multiple videos to
another location.
• Lock/Unlock: locks the voice file to protect it from deletion, or
unlocks the voice file to allow deletion.
• Copy: allows you to copy the Selected or Multiple videos to another
location.
• Properties: displays basic details about this voice file such as:
Name, Format, Size, Forwarding, Date created, and Location.
• Rename: changes the name of the video.
• Create folder: allows you to create a new folder to contain your
videos.
74
• Sort by: allows you to sort and view videos by Date, Type, Name, or
2. Highlight a file and press the Options (LSK) to choose from
Size.
the following options:
• Bluetooth visibility: allows you to enable Bluetooth to share the
selected video or multiple videos with other Bluetooth devices.
• Send via: allows you to send a file as an attachment via Message,
Email, or to a Bluetooth enabled device.
• Lock/Unlock: locks the video file to protect it from deletion, or
unlocks the video file to allow deletion.
• Delete: allows you to delete the Selected, Multiple, or All files.
• Move: allows you to move the Selected, or Multiple files to another
location or folder.
• Properties: shows properties of the video, such as Name, Format,
Resolution, Size, Forwarding, Date created, and Location.
• Copy: allows you to copy the Selected, or Multiple files to another
location or folder.
Recording a Video
Use your phone’s Camcorder to take videos of people or events
while on the move. You can send these videos in a message or to
another Bluetooth device. For more information on how to record
a video, see “Recording and Sending a Video” on page 96.
• Rename: allows you to change the name of the selected file.
• Create folder: allows you to create a new folder in which to contain
other files.
• Sort by: allows you to sort files by Date, Type, Name, or Size.
Other Files
• Bluetooth visibility: allows you to enable Bluetooth to share the
selected file or multiple files with other Bluetooth devices.
In Other Files, you can view or store other types of files without
corruption, various document files and files stored in the phone’s
memory, or on a memory card.
• Lock/Unlock: allows you to lock the file to protect it from deletion or
unlock it to allow deletion.
• Properties: allows you to view Basic details about the selected file.
Available file formats are Microsoft Word, Adobe PDF, or Plain
text.
1. From Home screen, press Menu (LSK) ➔ Media
➔
Other files.
Media
75
Memory Status
With Memory Status, you can check the amount of memory being
used and memory remaining for Photos, Music, Images, Sounds,
Videos, Other files, or Games and Apps.
1. From Home screen, press Menu (LSK) ➔ Media ➔
Memory status
2. Press the Left or Right navigation keys to scroll between
the memory status On phone or On memory card
.
.
76
Section 9: Organizer
Thissectionoutlinesthevariousapplicationsthatareavailableon
your phone.
Month view
This is the default view for the Calendar application, the calendar
displays the selected month with today’s date highlighted.
Organizer
The Organizer allows you to set alarms, schedule appointments,
view the calendar, create tasks, perform simple math
calculations, check world time, perform unit conversions, set a
timer, and use a stopwatch.
ᮣ
In Month view, press Options (LSK) for choose any of
these options:
• View: displays the selected date view.
• View by: displays the Day view or Week view for the selected day.
Calendar
With the Calendar feature, you can:
• Create: allows you to create an Appointment, Anniversary, Holiday,
Important, or Private event.
•
•
•
•
•
Consult the calendar by month, week, or day.
Set schedules and note anniversaries
Write memos to keep track of your schedule.
Set an alarm to act as a reminder, if necessary.
Check your memory status.
• Go to: takes you to the Today’s date or the date you entered.
• Event list: displays a list of selectable events such as:
Appointments, Anniversaries, Holidays, Important, or Private.
• Delete: allows you to delete all events for a selected date, for a
specified period, for this month, or before a date. You can also
delete all events.
To navigate to the Calendar:
• Settings: allows you to configure calendar viewing settings such as
the Starting day (of the week) and View by.
ᮣ
From Home screen, press Menu (LSK) ➔ Organizer ➔
Calendar.
• Memory status: displays the number of calendar events you
presently have and how many events you can create for each
category. For example: 0/50 means you used zero of fifty available
events for this category.
When you select the Calendar menu, the following options are
available:
Organizer
77
Week view
Day view
When you select this option, the calendar displays the selected
week with today’s date and time highlighted.
When you select this option, you are taken to the Day view of the
selected day with any events listed.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Calendar ➔ Options (LSK) ➔ View by ➔ Week.
Calendar ➔ Options (LSK) ➔ View by ➔ Day.
2. In Week view, press Options (LSK) for choose any of these
2. In Day view, highlight the event and press Options (LSK)
for choose any of these options:
options:
• View by: takes you to the Day view or Month view for the selected
• View: displays the details of an event highlighted on the Day view.
day.
• Viewby: takes you to the Week view or Month view for the selected
day.
• Create: allows you to create an Appointment, Anniversary, Holiday,
Important, or Private event.
• Create: allows you to create an Appointment, Anniversary, Holiday,
Important, or Private event.
• Go to: takes you to today’s date or the date you entered.
• Event list: displays a list of selectable events such as:
Appointments, Anniversaries, Holidays, Important, or Private.
• Send via: allows you to send this event information as an
attachment via Message, Email, or to a Bluetooth enabled device.
• Delete: allows you to delete all events for a selected date, for a
specified period, for this week, or before a date. You can also delete
all events.
• Event list: displays a list of selectable events such as:
Appointments, Anniversaries, Holidays, Important, or Private.
• Delete: allows you to delete the selected event, or delete all events.
• Settings: allows you to configure calendar viewing settings such as
the Starting day (of the week) and View by.
• Save in Other files: allows you to save this event information to
Other files.
• Missed alarm events: displays a list of missed alarm events.
• Print via Bluetooth: allows you to send this event information to a
• Memory status: displays the number of calendar events you
presently have and how many events you can create for each
category. For example: 0/50 means you used zero of fifty available
events for this category.
Bluetooth enabled device.
• Settings: allows you to configure calendar viewing settings such as
the Starting day (of the week) and View by.
78
• Missed alarm events: displays a list of missed alarm events.
Anniversaries
• Memory status: displays the number of calendar events you
presently have and how many events you can create for each
category. For example: 0/50 means you used zero of fifty available
events for this category.
This option allows you to record anniversaries in your calendar.
You can also set an alarm to remind you of important
anniversaries.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
3. Press View
(
) to view the information about the
Calendar.
selected event.
2. Press Options (LSK) ➔ Event list ➔ Anniversaries.
Appointments
3. Press Options (LSK) ➔ Create.
This option allows you to set appointments.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Calendar.
4. Enter the occasion in the Title text box then press the
Down Navigation key.
5. Continue to enter other information including Details, Date,
2. Press Options (LSK) ➔ Event list ➔ Appointments.
Alarm, and Repeat every year.
3. Press Options (LSK) ➔ Create.
6. Press Save (
) to save the Anniversary event to the
4. Enter the occasion in the Title text box then press the
Calendar.
Down Navigation key.
Holidays
5. Continue to enter other information including Details, Start
date, Start time, End date, End time, Location, Alarm,
Before, Alarm tone, Repeat and Until.
This option allows you to record holidays in your calendar. You
can also set an alarm to remind you of important anniversaries.
6. Press Save (
) to save the Appointment event to the
Calendar.
Organizer
79
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
5. Continue to enter other information including Details, Start
date, Start time, End date, End time, Location, Alarm,
Before, Alarm tone, Repeat, and Until.
Calendar.
2. Press Options (LSK) ➔ Event list ➔ Holidays.
6. Press Save (
) to save the Important event to the
3. Press Options (LSK) ➔ Create.
Calendar.
4. Enter the occasion in the Title text box then press the
Private
Down Navigation key.
This option allows you to record private dates in your calendar.
You can also set an alarm to remind you of important dates.
5. Continue to enter other information including Details, Date,
and Repeat every year.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
6. Press Save (
) to save the Holiday event to the
Calendar.
Calendar.
2. Press Options (LSK) ➔ Event list ➔ Private.
Important
3. Press Options (LSK) ➔ Create.
This option allows you to record important dates in your calendar.
You can also set an alarm to remind you of important dates.
4. Enter the occasion in the Title text box then press the
Down Navigation key.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Calendar.
5. Continue to enter other information including Details, Start
date, Start time, End date, End time, Location, Alarm,
Before, Alarm tone, Repeat, and Until.
2. Press Options (LSK) ➔ Event list ➔ Important.
3. Press Options (LSK) ➔ Create.
6. Press Save (
) to save the Private event to the
4. Enter the occasion in the Title text box then press the
Calendar.
Down Navigation key.
80
Missed alarm events
Alarm
You can display all the events where an alarm was set, but was
not turned off.
This feature allows you to:
•
•
Set up to 3 alarms to ring at specified times.
Set the phone to switch on automatically and ring the alarm even if the
phone is switched off.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Calendar.
The following options are available:
2. Press Options (LSK) ➔ Missed alarm events.
–
Alarm 1: set the Name, Alarm activation, Alarm time, Alarm type,
Alarm tone, Alarm volume, Day, Snooze, and Repeat for
this alarm.
3. To view event information, highlight an event and
press
4. To acknowledge and remove the event, press Confirm
(LSK) or . The event is removed from the Missed
alarm events menu.
. The missed alarm event information displays.
–
–
–
Alarm 2: set the Name, Alarm activation, Alarm time, Alarm type,
Alarm tone, Alarm volume, Day, Snooze, and Repeat for this alarm.
Alarm 3: set the Name, Alarm activation, Alarm time, Alarm type,
Alarm tone, Alarm volume, Day, Snooze, and Repeat for this alarm.
Auto power: alarm rings at the specified time even if the phone is
turned off. If the option is set to Off, the alarm does not ring.
Memory status
This menu item shows the number of calendar events that are
stored on the handset as well as the total number of available
events. Example: 2/100 means that currently there are two alarm
events scheduled out of a possible 100.
To set the alarm:
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Alarm.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
2. Select an alarm and press the Select (LSK) or
.
Calendar.
3. Highlight the Name field, press and hold
to
2. Press Options (LSK) ➔ Memory status.
backspace and erase the text, then enter a new name for
this alarm (if desired).
Organizer
81
4. Highlight the Alarm activation field and press the Right
Navigation key to select On
9. Highlight the weekday check boxes. Press Edit
(
) to
.
display a list of days.
5. Highlight the Alarm time option. Enter the time you want
10. Press
to place a checkmark (Mark) next to one of
the Alarm to sound.
the following selections: Everyday, Once only, Sunday,
Monday, Tuesday, Wednesday, Thursday, Friday, or
6. Press the Down Navigation key to highlight the Alarm type
Saturday. Press
Unmark).
11. Press OK (LSK) to confirm your selections.
12. Highlight the Snooze field and press the Right Navigation
key to select one of the following times: Off 1 min
3 min 5 min 7 min, or 10 min
13. Highlight the Repeat field and press the Right Navigation
key to select one of the following times: 1 time 2 times
3 times 5 times, or 10 times
to place or remove a check mark
option and press Edit
(
). Select one of the following
(
alarm types and press OK (LSK):
• Melody: the alarm rings using the selected ring melody.
• Increasing melody: the volume of the melody increases.
• Vibration: the phone vibrates but does not play a tone.
,
,
• Vibration then melody: the phone vibrates 3 times and then starts
playing a melody.
,
,
.
• Vibration and melody: the phone vibrates and plays the melody
simultaneously.
,
,
,
.
• Vibration and increasing melody: the phone vibrates and
increases the volume of the melody.
14. Press Save
(
) to confirm and store your new settings.
key to return to Home screen.
7. Highlight the Alarm tone field, press Edit
(
) to display
15. Press the
a list of tones from which to choose, then press Select
16. To stop the alarm when it rings, press any key or press the
(LSK).
Snooze (RSK).
8. Highlight the Alarm volume field and press the Left or Right
Navigation key to decrease or increase the volume.
82
Voice Recognition
Note: Use ASR in a quiet environment so it can accurately recognize your
commands. Voice Dial works best in quieter environments. When
saying a name, speak at a normal speed and say the name clearly.
There is no need to pause between the first name and last name.
This feature is used to activate a wide variety of functions on
your phone. You can use your phone’s built-in automatic speech
recognition (ASR) software to dial a phone number in your
Contacts or to launch phone functions. All you have to do is to
talk into the phone, and your phone will recognize your voice and
complete tasks by itself.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
2. When the Voice Dialer says the “Say a command” prompt,
prompts you to say the name of the command you want to use.
To complete your task, simply follow the voice prompts.
say one of the following commands:
•
•
•
•
•
•
•
•
“Call Steve Smith”
•
on page 84.)
“Call Steve Smith at home,...”
“Call (888) 555 5555”
“Send message Steve Smith”
“Lookup Steve Smith”
“Go to [Application]”
•
Send message <Name or #> to launch text messaging on your phone
and specify a recipient for a new message. (For more information,
“Go to Calendar”
•
•
list of available contacts.
“Check Missed calls”
3. A menu prompts you to confirm your selection. If you said
a name with more than one match in Contacts, or if you
stored more than one number for the contact, you are
prompted to select from multiple options.
information, refer to “Opening Menus using Voice Recognition”
on page 85.).
•
Check <Item> to check your phone’s status. (For more information,
refer to “Checking Phone Status” on page 85.)
Organizer
83
Tips for Using Voice Dial
Sending a Message
Voice recognition works best in quieter environments. When
saying a name, speak at a normal speed and say the name
clearly. There is no need to pause between the first name and
last name.
To send a message:
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
2. When the application says the “Say a command” prompt,
Making a Voice Call
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
say “Send message”.
3. If you hear “Say the name or number,” say a name or phone
number of the recipient. For example, say “Steve Smith” or
“9725555555.” The entry information for the specified
contact is displayed. Use the name of a person in your
Contacts list and, optionally, the type of number (Mobile1,
Home1, etc.) you want to send it to. For example, say
“Send Text Steve Smith Mobile1.”
2. When the application says the “Say a command” prompt,
say “Call”.
3. If you hear “Say the name or number,” say a name or a
phone number.
4. If you hear “Which number?,” say a number type (for
example, “Mobile1”).
4. If the phone did not properly recognize the command, it
prompts you with “Did you say, send text message to?
”
Note: You can skip steps 3 and 4 by saying a name and location after “Call”
without pausing (for example, “Call Steve Smith mobile”).
5. Respond by saying one of the following: Yes
6. Use the keypad to enter text and press Send
,
No
,
Note: If the voice recognition does not recognize the name or number, it will
find the most likely matches and display a list of up to three names or
numbers. You will hear “Did you say…” followed by the name or
number. You can confirm by saying “Yes.” Say “No” to change the
selection.
(
) to
complete the message and deliver it. For more
information, refer to “Entering Text” on page 30.
84
Opening Menus using Voice Recognition
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
Note: If you want to create a multimedia message, follow steps 7 and 8.
7. Press the Down navigation key and select Add picture
.
8. After adding the attachment, press Options to set options
for this message:
2. When the application says the “Say a command” prompt,
say “Go to”. A list of valid destinations is displayed and you
are prompted with “Which shortcut?”
• Preview: allows you to view the message prior to sending.
• Add recipients: allows you to add Recent recipients, Contacts,
3. If the list is too long to fit on one screen, you can say the
Groups. or send this message to the Online Album.
name of a destination.
• Insert: allows you to insert a Text template, Text emoticon,
Contacts, or Bookmarks. The Text templates allow you to apply one
of the preset message templates to the text. Select one of the 12
items stored in the Text message templates menu. Contact allows
you to add names and phone numbers to your message.
4. Examples can include: Web, Calendar, Ringtones, Tasks,
Contacts, Voice mail, or Games and Apps.
5. Say the name of the application you want the phone to
Bookmarks allows you to add Internet addresses to your message.
activate.
• Add attachment: allows you to attach a File, Name card,
Appointment, Anniversary, Private, Holiday, Important, Tasks,
Memo, or Bookmarks to the message.
Checking Phone Status
You can use voice recognition to obtain information about your
phone such as Status, Messages, Missed calls, Time, Signal
strength, Network, Battery, My phone number, and Volume.
• More: allows you to Add a page, Add subject, Edit style, Sending
options, or Select a language (Français, or Español) for this
message.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
• Save to: save the message to your Drafts or Templates folder.
Voice recognition.
• Exit composer: exits the composer and displays the Create new
screen.
2. When the application says the “Say a command” prompt,
9. Press Send
(
) to send the current picture message.
say “Check”.
Organizer
85
3. When you hear “Which status item?”, speak an item.
• Never Confirm to never confirm any command operations. The
phone will always act on what it registers as the current command,
even if it is incorrect and without notifying you.
Voice Recognition Settings
Voice recognition settings consist of the following options:
To adapt the system to your voice:
•
•
•
•
•
Confirmation
Adaptation
Audio modes
Speakerphone
About
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition ➔ Settings (RSK) ➔ Adaptation ➔
Adapt voice ➔ Start.
2. Hold the phone so that the microphone is approximately
six inches away from your mouth and you can clearly read
the onscreen number sequences.
Configuring Voice Recognition Options
To change the confirmation:
3. Repeat either the digits or words shown onscreen using a
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
normal tone of voice.
•
If the phone cannot recognize your words, it will continue to display
the same information onscreen.
2. From the “Say a command” prompt, press Settings (RSK)
➔ Confirmation.
4. Repeat the previous step for the remaining sets of digits or
3. Select one of the available options:
words.
• Automatic to always provide you with options if there was an issue
registering the command, confirm any commands, and then
announce any actions.
5. When you are finished with a full session, you will reach a
screen that reads, “Adapting.”
6. Press
to save.
• Always Confirm to always confirm any command actions before
they are done, even if it was properly registered.
86
To reset the adaptation
• Readout mode reads out every onscreen menu and option
selected.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition ➔ Settings (RSK) ➔ Adaptation ➔
Reset Voice. (The phone displays a reset voice dialog).
To enable and disable Speakerphone:
You can control the speakerphone behavior while using voice
recognition.
2. Press Yes to reset the voice recognition parameters or No
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
to exit.
Voice recognition.
To enable and disable Audio Modes:
2. From the “Say a command” prompt, press Settings (RSK)
You can customize whether the voice recognition feature displays
either a list of top voice recognition choices or automatically dials
the first number without displaying a choice list.
➔ Speakerphone.
3. Select one of the following: Automatic, Always on, or Always
off.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition.
To display information about voice recognition
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Voice recognition ➔ Settings (RSK) ➔ About.
2. From the “Say a command” prompt, press Settings (RSK)
➔ Audio modes.
3. Select one of the following:
• Expert mode displays both a selectable list of matching entries and
if the first entry is not correct, the phone will continue to read out
each available option until it detects either a confirmation (Yes) or
rejection (No).
• Prompt mode displays a selectable list of available dialing options
and only reads out the entry name. You are required to touch an
onscreen option to activate a command.
Organizer
87
High priority items display a “1” triangle icon, Normal priority
items display a “2” triangle icon, and Low priority items display a
“3” triangle icon.
Tasks
This feature allows you to enter a task list.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Tasks.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Tasks.
2. Press Options (LSK) ➔ Create to create a new task.
2. Highlight a task from the list and press View
3. Highlight a field to edit and press Edit
(
).
3. Enter a short description of the task in the Title field then
(
).
press the Down Navigation key.
4. Edit the items you wish to change and press Save
(
)
4. Enter a short description in the Details field and press the
when your edits are complete.
Down Navigation key.
Memo
5. Continue to enter other information including Start date
Due date Alarm Alarm date Alarm time Alarm tone and
Priority
6. Press Save
,
This option allows you to create notes to add to your events.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Memo.
,
,
,
,
.
(
) when you are finished. Your Task list
2. Press Options (LSK) ➔ Create to create a new memo. A
saves to the Calendar.
blank Memo screen displays.
Editing the Tasks List
3. Enter your text and press Save
(
) to save.
When you select the Tasks list menu, the current contents display
with a status checkbox and a priority marker.
If the item was done, a check displays in the checkbox.
88
Calculator
Tip calculator
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division.
This feature calculates a tip amount by percentage, and divides
the total bill by the number of payers.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔ Tip
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
calculator.
Calculator.
2. In the Bill field, enter the check amount.
2. Enter the first number using the numeric keys.
Note: Press
to enter a decimal point for the exact dollar amount.
3. Use the Navigation keys to select the calculation method,
according to the illustration on the display.
3. Highlight Tip(%) percentage. 15 is the default value but
you can change this value. The Tip($) field value
calculates according to the values entered.
4. Enter the second number using the numeric keys.
Note: Press the Left soft key to insert a decimal point, or press it multiple
4. Highlight the # paying field to change the number of
times to create brackets. Press
to move the cursor to the left or
press
to move the cursor to the right within a number.
people contributing to the bill.
5. The You pay field displays the total for each individual.
5. Press
to view the result. Repeat steps 1 to 4 as
World clock
many times as required.
This feature allows you to see the current time in another part of
world. There are two time lines available. You can set the first
setting to your home city and use the second setting to check
other city times.
Organizer
89
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
2. Scroll to the conversion category you wish to use and
press Select (LSK) or
World clock.
.
2. Press Options (LSK) ➔ Add to create a new time zone.
3. Use the Up, Down, Left, and Right navigation keys to
select the From and To units of measure for the quantity
you want converted.
3. Press the Left or Right Navigation key until the desired
GMT time zone displays in the field.
4. Press the Down Navigation key and press to place a check
Tip: Press
to enter a decimal point.
mark in the Daylight saving checkbox (if applicable).
4. Press Back (RSK) to return to the Converter menu.
5. Press OK (LSK) to confirm you settings.
Timer
Converter
You can use this menu to set a timer. To enable the Timer, use the
following options:
The conversion menu provides the following conversion
categories:
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
–
–
–
–
–
–
Currency
Length
Weight
Volume
Area
Temperature
Timer.
2. Press Set (LSK), enter the length of time as HH:MM:SS and
press OK (LSK).
3. Press Start (
– or –
) to start the timer.
To convert from one unit to another:
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Converter.
Press Pause (
) to pause the timer.
4. Press
when you are finished.
90
3. Enter a URL for the RSS feed, then press OK (LSK).
Stopwatch
The URL automatically retrieves.
This feature allows you to use a stopwatch.
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
Stopwatch.
4. Press Subscribe (LSK),
to add the current RSS to
your list of stored RSS feeds, or Cancel (RSK) to exit the
application.
2. Press Start or
3. Press Lap
4. Press Stop (RSK) or
to start the stopwatch.
Configuring the RSS reader settings
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
RSS reader.
(
) to record each lap.
to stop recording the lap time.
You can view up to 50 lap times.
2. Press Options (LSK) ➔ Settings
.
5. Press Reset (LSK) to erase all previously recorded
stopwatch times.
3. Highlight Auto update and press Mark (
).
4. Highlight the next field and press the Right Navigation key
RSS reader
to select the frequency the RSS reader updates: RSS reader
The RSS reader feature allows you to receive up-to-date web
pages, news, and other information (such as updates) distributed
through an RSS feed.
launch Daily, or Weekly.
,
5. Press Save (LSK) to confirm and save your selections.
Enter the RSS feed address in the RSS reader to create an entry,
then periodically update the entry manually or automatically.
To set up the RSS reader feature:
1. From Home screen, press Menu (LSK) ➔ Organizer ➔
RSS reader.
2. Press Options (LSK) ➔ Add
.
Organizer
91
Section 10: Camera
This section explains how to use the camera on your phone. You
can take photographs by using the built-in camera functionality.
Tip: Press the
camera module.
key on the right side of the phone to access the
Using the Camera
2. Adjust the image by aiming the camera at the subject.
Using the camera module in your phone, you can take photos of
people or events while on the move. Additionally, you can send
these photos to other people in a Picture Messaging message or
set a wallpaper or caller ID image.
3. Press Menu (LSK) to access the camera options. For
details, see “Configuring Camera Options” on page 94.
Note: You can use the keypad to quickly change the camera options.
Note: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places where you may interfere with another
person’s privacy.
4. Press
or
to take the photo. Send to: My
Album Online? displays.
5. Press Yes (RSK) if you want to send the photo to your T-
Mobile My Album Online service. The phone’s default
destination is set to My Album Online. The photo is
automatically saved to the Photos folder in the phone.
Take and Send
Your camera produces photos in JPEG format.
Note: When you take a photo in direct sunlight or in bright conditions,
shadows may appear on the photo.
Note: To change the default destination for your pictures, press Options
(LSK) when Send to: My Online Album? displays on the screen.
Select the Default destination ➔ Change, then change your default
destination to Recent recipients, Contacts, Online album, New email,
or New number.
1. From Home screen, press Menu (LSK) ➔ Media ➔Photos
➔Camera.
92
6. Press Options (LSK) to view the following options:
7. Press Options (LSK) ➔ Send via to send this image in a
Message Email, or via Bluetooth.
,
• Take another: allows you to take another picture.
– or –
• Send to: sends this image to Recent recipients, Contacts, Groups,
or Online album.
8. Press Options (LSK) ➔ Send to creates a Message, where
you can choose to send the photo to Recent recipients
• Send via: attaches this photo to a new outgoing Message, Email,
,
or Bluetooth.
Contacts Groups, or to an Online Album.
,
• Default destination: allows you to remove or change the default
destination for the location of photos. Options include: Recent
recipients, Contacts, Online album, New email, or New number.
– or –
Press Options (LSK) and select Take another then press
• Print via Bluetooth: allows you to send the current picture to an
external Bluetooth printer for reproduction.
Select or
to return to Capture mode.
• Delete: allows you to erase the current image. Press Yes (LSK) to
9. Press
to return to Home screen.
complete the deletion.
Camera Shortcuts:
• Set as: allows you to set this image as a Wallpaper, Front display, or
Picture ID.
Shortcut keys allow you to change some settings using the
keypad, Navigation keys, and Volume key while in capture mode.
• Edit: allows you to edit the current image with effects, Adjustments,
Transformation, Cropping, Insertions, Set as, delivery and external
printing.
Note: These button functions also apply to the camera feature if it is
accessed via Menu (LSK) ➔ Media
➔
Photos
➔
Camera.
• Rotate: allows you to rotate the current image.
• Properties: displays properties for the current image such as:
Name, Format, Resolution, Size, Forwarding, Date created, and
Location.
Camera
93
–
Single: takes a single photo and allows you view it before returning to
the shooting mode.
takes the photograph.
–
–
Continuous: takes a succession of photos.
Navigation Left and Right navigation keys adjust the image
Panorama: takes multiple photos to be combined into a single
panoramic image.
Keys
brightness.
–
–
Smile shot: focuses on the foreground or subject and not on the
background.
Up and Down navigation keys zoom in and out.
Allows you to switch between Camera
and Camcorder modes
Mosaic: takes up to four photos and then groups them together into a
single final photo.
• Night mode select On, to allow for better pictures in low light
:
toggles through the shooting modes.
conditions, or Off.
• Size: allows you to set the image size to either: 2M (1600x1200),
cycles among the various timer modes (Off, 2
seconds, 5 seconds, or 10 seconds).
1.3M (1280x960), 0.3M (640x480), or 320x240.
• White balance: allows you to set this option from the following
choices: Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
changes the viewfinder mode.
• Exposure meter: choose how the camera measures the light
source: Matrix, Center-weighted or Spot.
Configuring Camera Options
• Effects: choose how the image effects: None, Black and white,
Sepia, Negative, and Watercolor.
ᮣ
Before taking a photo, press Menu (LSK) to access the
following:
• Set default destination: allows you to Remove a current
destination location or Change the current location by establishing a
new folder in which to place the photo(s). Select from Camera
Shortcuts the following options: Recent recipients, Contacts, Online
album, New email, or New number.
• Camera: allows you to take a picture.
• Shooting Mode: takes a photo in various modes. Once you change
the mode, the corresponding indicator displays at the top left of the
display.
• Self timer: choose the time delay before an image is taken: Off,
2 seconds, 5 seconds, or 10 seconds.
94
• Viewfinder mode: choose assign the way in which the camera
image is displayed: Full screen view and indicator, Full screen view,
Full screen view and guide, and Standard ratio view.
• Default destination: allows you to Change or Remove where your
photos are sent after you take them.
• Delete: allows you to delete the selected or multiple photos.
• Rename: allows you to rename the photo.
• Settings
:
–
Photo: choose the Quality of new photos and GPS image tagging
• Edit image: allows you to edit the selected image.
(On/Off).
• Bluetooth visibility: allows you to enable the current photo so it is
visible to other Bluetooth devices.
–
Setup: configure the Review screen
storage, or view camera Shortcuts
Photo Options
,
Shutter sound, Default
.
• Slide show: allows you to see all of your photos in a slide show
presentation.
1. From Home screen, press Menu (LSK) ➔ Media ➔
Photos. When you access this menu, your phone displays
the photos in Line view, which shows them as small
images. Use the Navigation keys to scroll through the
photos.
• Print via Bluetooth: allows you to send the selected photo to a
Bluetooth enabled printer.
• Lock/Unlock: allows you to lock the selected photo to protect it
from deletion, or unlock the photo to allow deletion.
• Properties: shows the properties of the photo, such as the file
Name, Date, Format, Resolution, Size, and Lock/Unlock.
2. Press View
(
) to view the photos on the full screen.
Deleting a Photo
Press Back to redisplay Line view.
You can delete photos one by one or all at one time.
1. From Home screen, press Menu (LSK) ➔ Media ➔
Photos. From the Photos menu, highlight the photo you
want to delete.
3. With the image displayed in full screen, press Options
(LSK) to use the following options:
• Send to My Album: allows you to send your photos to My Album.
• Send via: allows you to send the selected photo as a Message,
2. Press Options (LSK) ➔ Delete and press the Right
Email, AUdio postcard, or to a Bluetooth enabled device.
Navigation key.
• Set as: allows you to set the photo as a Wallpaper, Front display
image, or as a Picture ID.
Camera
95
3. Select a deletion of either the currently Selected image,
4. Press
or
to begin shooting video.
Multiple, or All images and press Select (LSK) or
.
5. Press Stop (RSK) or Camera key to stop the recording and
4. Press Yes (LSK) to confirm the deletion.
save the video. Press
5. Press
when you finish.
6. After the video saves:
•
Press Options (LSK) for Video options. For more information, see
Using the Camcorder
Use the camcorder module in your phone to record videos of
people or events while on the move. You can send videos to other
people in a message or via Bluetooth.
“Video Options” on page 98.
•
The screen displays “Send to: My Album Online?” Press Yes (RSK)
to send the highlighted video to your online album.
7. Press Options (LSK) ➔ Send via to send the video in a
Message, Email, or to a Bluetooth device.
– or –
Recording and Sending a Video
Tip: For best results when shooting video in direct sunlight or in bright
conditions, provide your subject with sufficient light by putting the light
source behind you.
Press Options (LSK) ➔ Send to, to create a Message,
where you can choose to send the video to Recent
recipients, Contacts, Groups, or to an Online Album.
Record video
➔
.
8. Press
to return to the Home screen.
2. Before recording the video, press Menu (LSK) to access
camcorder options (see “Video Options” on page 98.)
3. Adjust the image by aiming the lens at the subject.
Tip: You can use shortcuts to quickly change some camcorder settings. For
more information, refer to “Camcorder Shortcuts” on page 97.
96
–
Setup: configure the Review screen, Default storage, or view
camcorder Shortcuts.
Configuring the Camcorder
ᮣ
Before taking a photo, press Menu (LSK) to access the
Camcorder Shortcuts
camcorder options.
Shortcut keys allow you to change some settings using the
keypad, Navigation keys, and Volume key while in capture mode.
• Camcorder: allows you to record a video.
• Mode limit the size of videos. Choose Normal or Limit for MMS.
:
• Size: if Limit setting is Normal, displays either 320x240 or 176 x
144.
Note: These button functions also apply to the camcorder feature if it is
accessed via Menu (LSK) ➔ Media
➔
Videos
➔
Record video.
• White balance: choose a setting to match conditions. Choose from
Auto, Daylight, Incandescent, Fluorescent, or Cloudy.
shoots video.
• Exposure meter: choose how the camera measures the light
source: Matrix, Center-weighted or Spot.
Navigation Left and Right navigation keys adjust the image
• Effects: apply special effects to the photo. Options include: None,
Black and White, Sepia, Negative, or Watercolor.
Keys
brightness.
• Default destination: Remove a current destination location or
Up and Down navigation keys zoom in and out.
Change the current location.
Allows you to switch between Camera
and Camcorder modes
• Timer: set a time delay between the time you press
and
the video starts to record. Select the length of delay, from Off, 2
seconds, 5 seconds, or 10 seconds.
changes the size of the image being recorded.
• Viewfinder mode: select Full screen view and guidelines. or
Standard ratio view.
cycles among the various timer modes (Off, 2
seconds, 5 seconds, or 10 seconds).
• Settings
:
–
Video: set the Quality of the video, to Economy, Fine, or Superfine, and
set Audio recording to On or Off.
changes the viewfinder mode.
Camera
97
1. From Home screen, press Menu (LSK) ➔ Media
➔
Photos.
Video Options
1. With the video recording just stopped (capture mode),
2. Select My album. The web2go browser launches and the
press Options (LSK) for these options:
T-Mobile Web page displays.
• Record another: returns to capture mode to record another video.
• Play: plays back the current video.
3. Scroll to highlight an album and press Select (LSK) or
to view the photos.
• Send to: creates a message to send this video in a message.
4. Scroll to view the photos in the album.
• Send via: sends the selected photo in a Message, Email, or to a
Bluetooth enabled device.
5. Press the
Home screen.
key to exit the browser and return to the
• Default destination: change where your videos are sent after
recording. Choose from Recent recipients, Contacts, Online Album,
New Email, New number.
• Delete: delete the selected video.
• Properties: displays information about the video, such as Name,
Format, Resolution, Size, Forwarding, Date created, and Location.
My Album
My album is a private online picture album that you can use to
store and share pictures, videos, voice messages, and text.
Use the following procedures to access My album
.
Note: When accessing My album, charges may apply. The feature is not
activated until you send your first image to the remote My album
location.
98
Section 11: Changing Your Settings
Thissectionexplainsthesoundandphonesettingsforyourphone.
It includes such settings as: display, security, memory, and any
other settings associated with your phone.
2. To customize the Normal profile settings, highlight Normal
and press the press Options (LSK) ➔ Edit. Press the
Navigation key left or right to select a new tab.
Personalize your Phone
You can customize various phone settings such as sounds, the
display, phone settings, messaging key, memory, language,
greeting message, and time and date.
• Incoming call: highlight a setting and press
selection.
Edit to make a
–
Call alert type: select an alert type for incoming calls, from Melody,
Increasing melody, Vibration then melody, Vibration and melody, or
Vibration and increasing melody.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings ➔
–
–
Ringtone: select a ringtone for incoming calls, from one of the listed
folders, or from the optional memory card.
Personalize.
Sound profiles
You can choose and customize sound settings as part of sound
profile.
Ringtone volume: choose a volume level between 1 and 7 for
incoming call alerts.
• New messages: highlight a setting and press
a selection.
Edit to make
Normal
–
–
Message alert type: select an alert type for new messages, from
Melody, Vibration, Vibration and melody, or Mute.
Normal profile includes audible alerts and tones for incoming
calls and messages, key presses, and powering on and off.
Message alert tone: choose an alert tone for new messages, from T-
Mobile message, Message tone 1, Message tone 2, Message tone 3 or
Message tone 4.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Sound profiles.
–
–
Message alert repetition: choose an interval for repeating alerts for
new messages, from Once, Every 1 minute, or Every 2 minutes.
Message tone volume: choose a volume level between 1 and 7 for
new messages alerts.
Changing Your Settings
99
• Phone sounds: highlight a setting and press Edit
a selection.
(
) to make
Vibration
When set to Vibration profile, your phone vibrates to alert you to
incoming calls and messages.
–
–
–
–
Keypad tone: select a tone for keypad presses, from Beep, Lucid or
Off.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Power on type: choose a type of sound for the phone to play when
powering on, from Melody, Vibration, Vibration and melody, or Mute.
Personalize ➔ Sound profiles ➔ Vibration
.
Power off type: choose a type of sound for the phone to play when
powering off, from Melody, Vibration, Vibration and melody, or Mute.
2. To customize the Vibration profile settings, highlight
Normal and press the press Options (LSK) ➔ Edit. Press
the Navigation key right to select the New messages tab.
Phone sound volume: choose a volume level between 0 and 7 for
phone sounds.
3. After making selections, press Options (LSK) ➔ Save or
press the Back soft key, then press the Yes (LSK) soft key
to confirm your settings.
• New messages: highlight a setting and press
Edit to
change the selection.
–
Message alert repetition: choose an interval for repeating alerts for
new messages, from Once, Every 1 minute, or Every 2 minutes.
Silent
Note: There is only one setting available for customization within the
When set to Silent profile, your phone makes no sounds.
From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Sound profiles ➔ Silent
Vibration profile.
ᮣ
.
Tip: You can quickly activate Vibration profile from Home screen by pressing
and holding the
key until the “Vibration Profile on” message and
the Vibration profile icon
displays.
Note: There are no settings to customize for the Silent profile.
To return to the previous sound profile, press and hold the
key
until the phone returns to the previous profile and the icon disappears.
100
–
Message alert tone: choose an alert tone for new messages, from T-
Mobile message, Message tone 1, Message tone 2, Message tone 3 or
Message tone 4.
Driving
You can customize the Driving profile to include audible alerts
and tones for incoming calls and messages, key presses, and
powering on and off.
–
–
Message alert repetition: choose an interval for repeating alerts for
new messages, from Once, Every 1 minute, or Every 2 minutes.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Message tone volume: choose a volume level between 1 and 7 for
new messages alerts.
Personalize ➔ Sound profiles.
• Phone sounds: highlight a setting and press Edit
(
) to make
2. To customize the Driving profile settings, highlight Driving
and press the press Options (LSK) ➔ Edit. Press the
Navigation key left or right to select a new tab.
a selection.
–
–
–
–
Keypad tone: select a tone for keypad presses, from Beep, Lucid or
Off.
Power on type: choose a type of sound for the phone to play when
powering on, from Melody, Vibration, Vibration and melody, or Mute.
• Incoming call: highlight a setting and press Edit
a selection.
(
) to make
Power off type: choose a type of sound for the phone to play when
powering off, from Melody, Vibration, Vibration and melody, or Mute.
–
Call alert type: select an alert type for incoming calls, from Melody,
Increasing melody, Vibration then melody, Vibration and melody, or
Vibration and increasing melody.
Phone sound volume: choose a volume level between 0 and 7 for
phone sounds.
–
–
Ringtone: select a ringtone for incoming calls, from the Music, Sounds,
or Voice list folders on your phone, or from the optional memory card.
3. After making selections, press Options (LSK) ➔ Save or
press the Back soft key, then press the Yes soft key to
confirm your settings.
Ringtone volume: choose a volume level between 1 and 7 for
incoming call alerts.
• New messages: highlight a setting and press Edit
make a selection.
(
) to
–
Message alert type: select an alert type for new messages, from
Melody, Vibration, Vibration and melody, or Mute.
Changing Your Settings
101
–
Message alert tone: choose an alert tone for new messages, from T-
Mobile message, Message tone 1, Message tone 2, Message tone 3 or
Message tone 4.
Outdoor
You can customize an Outdoor profile to include audible alerts
and tones for incoming calls and messages, key presses, and
powering on and off.
–
–
Message alert repetition: choose an interval for repeating alerts for
new messages, from Once, Every 1 minute, or Every 2 minutes.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Alert tone volume: choose a volume level between 1 and 7 for new
messages alerts.
Personalize ➔ Sound profiles.
• Phone sounds: highlight a setting and press Edit
(
to make
2. To customize the Outdoor profile settings, highlight Outdoor
and press the press Options (LSK) ➔ Edit. Press the
Navigation key left or right to select a new tab.
a selection.
–
–
–
–
Keypad tone: select a tone for keypad presses, from Beep, Lucid or
Off.
Power on type: choose a type of sound for the phone to play when
powering on, from Melody, Vibration, Vibration and melody, or Mute.
• Incoming call: highlight a setting and press Edit
a selection.
(
to make
Power off type: choose a type of sound for the phone to play when
powering off, from Melody, Vibration, Vibration and melody, or Mute.
–
Call alert type: select an alert type for incoming calls, from Melody,
Increasing melody, Vibration then melody, Vibration and melody, or
Vibration and increasing melody.
Phone sounds volume: choose a volume level between 0 and 7 for
phone sounds.
–
–
Ringtone: select a ringtone for incoming calls, from the Music, Sounds,
or Voice list folders on your phone, or from the optional memory card.
3. After making selections, press Options (LSK) ➔ Save or
press the Back soft key, then press the Yes soft key to
confirm your settings.
Ringtone volume: choose a volume level between 1 and 7 for
incoming call alerts.
• New messages: highlight a setting and press Edit
make a selection.
(
to
–
Message alert type: select an alert type for new messages, from
Melody, Vibration, Vibration and melody, or Mute.
102
Dialing display
Display settings
Use Display settings to change various settings for the display or
backlight.
Choose font and the background settings for the dialing display.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Dialing display.
Wallpaper
Select a background image for display while in Home screen
mode.
2. Highlight a setting and press Select (LSK) to customize it:
• Font type: choose Normal 1 or Normal 2, then press Save (LSK).
Note: Wallpapers can be assigned to either the Main or Front Display.
• Font size: select Large, Medium or Small, then press Save (LSK).
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Wallpaper.
• Font color: select Basic (black and white), Monochrome, or
Gradation. For Monochrome or Gradation, press the Down
Navigation key and then scroll through the available colors. Press
Save (LSK) to save your selection.
2. Browse for images from the Photos or Images folders on
• Background color: choose from the available colors, then press
Save (LSK).
your phone, or from an optional memory card.
3. To set an image as the Wallpaper, highlight the image and
press Select (LSK) or the
key.
4. Preview the image, then press Set (LSK) to retain the
wallpaper, or press the Back soft key to discard the change
and choose another image.
Changing Your Settings
103
Brightness
3. Choose a time value, then press Save (LSK) to save your
changes.
Adjust the display brightness for better viewing in different
lighting conditions.
Keypad light
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Brightness.
Choose settings for times of day when the keypad light turn on.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Keypad light.
2. Choose a brightness level between 1 and 5, then press
Save (LSK) to save your changes.
2. In the Set time field, choose Use at any time to have the
keypad light turn on at any time of day, or Use at custom
time to create a time window for keypad light by setting
Backlight time
Select the length of time that the screen backlight stays on and
how long the backlight is dimmed before turning off.
After time and Until time
.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Main display ➔
Backlight time.
3. Press Save (LSK) to store your changes.
2. Highlight a setting and press Edit
(
) to select a time:
• On: choose a length of time for the screen backlight to stay on,
from 5 seconds, 15 seconds, or 30 seconds.
• Dim: choose a length of time for the screen backlight to remain dim
after the backlight setting, from Off, 5 seconds, 15 seconds, or 30
seconds.
104
Front Display
2. Press
to delete an existing character.
to delete the entire text string.
Press and hold
Adjust the wallpaper and greeting message displayed on the
outside display. It can be configured to display either a Wallpaper
(digital clock or My image) or a Greeting message (default or
custom).
3. Use the keypad to enter a new message into the empty
field. The onscreen box provides a preview of how the
message will appear on the front display.
To assign a Wallpaper to the front display:
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Front display ➔
Wallpaper.
4. Press Options (LSK) to access additional message options
such as: Save, Select language (Español or Français),
Edit style (Background color, Font color, Font size, or Font
type), or Cancel.
2. Select a Wallpaper:
5. Press
to store the new message.
• Clock allows you to assign an exterior clock image to the front
display. Choose from: Analog clock 1 Analog clock 2,
,
Digital clock 1, or Digital clock 2. Press Save (LSK) to store the
new selection.
• My image allows you to assign a wallpaper from either a default
image or from a location such as Photos or Images.
Press Change (LSK) and use the Navigation keys to locate an
image. Press Select (LSK) to store the new selection.
To change the front display greeting message:
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Display settings ➔ Front display ➔
Greeting message.
Changing Your Settings
105
Security
Phone settings
Use Phone settings to customize your phone’s operation to suit
your needs.
The Security settings allow you to restrict the use of your phone
by others and to restrict dialed calls. Lock codes and passwords
are used to protect the features of your phone.
Airplane mode
ᮣ
From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings ➔Security
➔
Airplane Mode allows you to use many of your phone’s features,
such as Games, Voice Notes, etc., when you are in an airplane or
in any other area where making or receiving calls or data is
prohibited. When your phone is in Airplane Mode, it cannot send
or receive any calls or messages, or access online information.
.
Lock phone
When the Lock phone setting is enabled, the phone locks
automatically when powered on, and you must enter the phone
password to use the phone. After entering the correct password,
you can use the phone until you power it off.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Phone settings ➔ Airplane mode
.
1. From Home screen, press Menu (LSK) ➔ Settings
➔
2. Highlight On or Off and press Save (LSK).
Personalize ➔ Phone settings ➔ Security Lock phone
➔
.
HAC mode
2. Select Enable to have the phone prompt you for a
user-defined code when you power on the phone.
– or –
This menu is used to activate or deactivate the Hearing Aid
Compatibility feature.
Important!: Hearing aid (HAC) mode works when the phone is open but is not
Select Disable to have the phone power on with no code
accessible when the phone is closed.
required.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
3. Press Confirm (LSK) to store your changes.
Personalize ➔ Phone settings ➔ HAC mode
.
2. Highlight On or Off and press Save (LSK).
106
Lock Applications
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings Security Change
phone password
➔
➔
➔
Using this menu, you can lock your applications which provide
access to information such as All, Call history, Messaging, Media
(Sounds, Images, Videos, Music, Other files), Calendar, Tasks,
Memo, Contacts, E-mail, and Voicemail. Once you have locked
the contents, you must enter the phone’s password to access the
associated menus.
.
2. Enter a password in the Current password field and press
Confirm (LSK). This password would have been previously
setup, see “Lock phone” on page 106.
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings ➔Security
Lock applications
➔
3. Enter the new password in the New password field and
➔
press Confirm (LSK).
.
4. Re-enter the same new password and press Confirm (LSK).
2. Press press Mark
(
) to place a check mark on a
Note: If you change your password, be sure to record it and keep it in a safe
place. If you forget your password, contact your Service Provider for
assistance.
selected item.
•
Select All to lock all listed applications.
3. Press Save (LSK) to lock the selected applications.
4. Enter a security password and press Confirm (LSK).
Change phone password
Check PIN code
When the Check PIN code feature is enabled, you must enter
your PIN each time you switch on the phone. This means that any
person who does not know your PIN cannot use your phone
without your approval.
The Change phone password setting allows you to change the
current phone password to a new one. You must enter the
current password to confirm the password change.
Note: You must enter the PIN code to enable or disable the Check PIN Code
feature.
Changing Your Settings
107
Set FDN mode
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings Security Check PIN
code
➔
➔
➔
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
allows you to restrict your dialed calls to a limited set of phone
numbers.
.
2. Select Enable to have the phone prompt you for the PIN
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings Security Set FDN
mode
2. Choose one of the following options:
➔
each time you power it on.
– or –
➔
➔
.
Select Disable to have the phone connect directly to the
network when you power it on.
–
–
Disable: you can call any number.
3. Press Save (LSK) to store your changes.
Enable: you can only call phone numbers stored in Contacts. You must
enter your PIN2 code. You can obtain your PIN2 from T-Mobile’s
customer service.
Change PIN code
This feature allows you to change your current PIN, provided that
the Check PIN code feature is enabled. You must enter the
current PIN before you can specify a new one.
3. Press Save (LSK) to store your changes.
Change PIN2 code
The Change PIN2 feature allows you to change your current PIN2
to a new one. You must first enter the current PIN2 (obtained
from T-Mobile) before you can specify a new one. Once you enter
a new PIN2, you are asked to re-enter the new PIN2 to as
confirmation.
Note: Pin lock must be enable before using this feature.
Once you enter a new PIN, you are asked to confirm the PIN
number by re-entering it.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings
Personalize ➔ Phone settings Security Change PIN
code
➔
Note: Not all SIM cards have a PIN2. This menu does not display if your SIM
➔
➔
card does not have the PIN2 feature.
.
108
USB Mode
Data Roaming
Select the default method of communication when you connect
your phone to a USB port on a PC to transfer files between your
PC and phone.
This feature allows you to control the use of data services when
your phone is in roaming area.
Important!: Once data roaming is disabled, avoid applications that may
reactivate the data roaming feature and charges incurred. Please
contact your T-Mobile service center for details.
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize Phone settings USB mode
2. Choose one of the following options:
➔
➔
➔
.
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize Phone settings Data roaming
➔
–
–
Samsung PC studio: uses PC Studio to communicate with the phone.
➔
➔
.
Ask on connection: each time you connect the phone to a PC, the
2. Select Enable to allow data roaming or Disable.
phone will prompt you to choose a USB mode.
–
Mass storage: treats your phone’s memory, and an optional memory
card, as a removable storage drive.
3. Press Save (LSK) to store your changes.
Shortcut Key
This menu allows you to assign a shortcut to the
3. Press Save (LSK) to store your changes.
Shortcut
key, to launch when pressed on the Home screen. You can
modify this setting any time.
Note: You are unable to connect to PC Studio when the Mass storage option
is selected.
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize Shortcut key
➔
➔
.
2. If this is the first time you are programming this key, read
the information that displays and press OK (LSK).
3. Select the shortcut to assign to the Messaging key and
press Assign (LSK).
Changing Your Settings
109
3. Press OK (LSK) to clear the application.
Messaging Key
This menu allows you to assign a shortcut to the
Messaging key, to launch when pressed on the Home screen. You
can modify this setting any time.
4. Enter your phone password in the Password field and press
Confirm (LSK).
5. At the Clear? prompt, press Yes (LSK) to confirm your
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize Messaging key
➔
action or No (RSK) to cancel.
➔
.
Memory Card Settings
2. If this is the first time you are programming this key, read
From this menu you can view details about the memory card,
format the memory card, rename the memory card, or turn
Bluetooth visibility on or off.
the information that displays and press OK (LSK).
3. Select the shortcut to assign to the Messaging key and
press Assign (LSK).
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Memory Settings
Clear phone memory
Personalize ➔ Memory settings
2. Select one of the following options and press
• Memory card details displays information about the memory card
➔
Memory card settings.
.
From this menu you can clear the memory for Media, Messaging,
Phonebook, Calendar, Tasks, or Memo. You can also select All to
clear everything listed.
:
such as Name, Maximum size and Available memory.
• Format allows you to format the memory card.
• Rename memory card allows you to rename the memory card.
• Bluetooth visibility on allows you to control the visibility of a
memory card to Bluetooth devices.
:
1. From Home screen, press Menu (LSK) ➔ Settings ➔
:
Personalize ➔ Memory settings
2. Highlight one of the applications to clear, or highlight All to
clear all the memory settings and press
A checkmark displays next to each application to clear.
➔
Clear phone memory.
:
.
110
Memory status
3. Highlight the Input language field and press Edit
then select English Français, or Español
(
),
,
.
You can check the amount of the memory being used and the
memory remaining for Shared memory, Messaging, Media,
Calendar, Tasks, Memo, and Contacts.
4. Press Save (LSK) to confirm your selections.
Enter a greeting to display briefly when the phone is powered on.
For details about entering characters, see “Entering Text” on
page 30.
The display shows the total space including the used and free
space. You can also view how much space is currently occupied
by each message box.
You can also check how many names and numbers are stored on
the Phone, on the SIM card, and the FDN list.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Greeting message.
1. From Home screen, press Menu (LSK) ➔ Settings
Personalize Memory settings Memory status.
➔
2. Press
message.
to clear the default text and enter your own
➔
➔
2. Select a category from the menu and press
to view
3. Press Options (LSK) for these options:
the memory status for that category.
• Save: saves the currently entered greeting message.
Language
Select the language for screen text and inputs.
• Select language: select Français or Español as the language for
displaying your message.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Personalize ➔ Language
2. Highlight the Screen text field and press Edit
select Automatic (based on the Input language), English
Français, or Español
• Edit style: configure the Font color, Font size, or Font type for this
.
greeting message.
• Cancel: exits the menu and return to the Personalize options.
(
), then
4. Press
to save your selections.
,
.
Changing Your Settings
111
Time and date
My Account
This menu allows you to control how your phone determines and
displays the current time and date.
This option provides you with account specific information such
as your current activity, Monthly Usage, Bill Summary, Plan &
Services, My Downloads, MobileLife , Store Locator, Support,
SM
1. From Home screen, press Menu (LSK) ➔ Settings ➔
and Help.
Personalize ➔ Time and date.
ᮣ
From Home screen, press Menu (LSK) ➔ My Account.
2. Select any of the following options:
Help
• Time zone updating: allows you to receive time information from
T-Mobile’s network.
This option uses the browser to display the T-Mobile Help menu.
–
–
–
Automatic: the phone automatically updates the time and date
according to the current time zone using the network service.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings ➔
Help.
Manual only: you need to manually set the time and date according to
the current time zone using the Set time menu.
Bluetooth
About Bluetooth
Prompt first: the phone asks for a confirmation before the update.
• Home zone: choose from a list of 30 time zones, if Manual only or
Prompt first are selected.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
• Time: allows you to change the hour and minute, if Manual only or
Prompt first are selected.
You don't need to line up the devices to beam information with
Bluetooth. If the devices are within range, you can exchange
information between them, even if they are located in different
rooms.
• Date: allows you to enter the month, day, and year, if Manual only
or Prompt first are selected.
• Time format: allows you to select whether the time displays in
12 hour or 24 hour format.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings ➔
• Date format: allows you to select the display format for the date:
MM/DD/YYYY, DD/MM/YYYY, or YYYY/MM/DD.
Bluetooth.
3. Press Save (LSK) to store your changes.
112
The following options are available:
Turn Bluetooth On/Off
My phone name
When your phone’s Bluetooth visibility is On, it identifies itself
using the name entered into this text field. This name can be
altered by selecting the pre-existing text and entering a new text
string in its place. This feature should be paired with a Bluetooth
security option.
Turn Bluetooth On or Off:
ᮣ
Make a selection and press Select (LSK) or
. When
you turn Bluetooth on, your phone proceeds with searching
for nearby Bluetooth devices.
1. Press and hold
to erase the previous name.
My devices
2. Use the phone’s keypad to enter a new name. The default
input entry method is Abc, where the initial character is
Uppercase and each consecutive character in that same
word is left as lowercase text.
This option allows you to search for new Bluetooth devices.
ᮣ
Select My devices ➔ Search new device. The phone
searches for available devices.
3. Press Save
(
) to save the new name.
My visibility
When Bluetooth Visibility is turned on, your phone is wirelessly
transmitting its phone name and status. This can be useful if you
are attempting to connect to other Bluetooth devices. Making
your phone visible can pose a security risk and invite
unauthorized connection. This feature should be used with
Bluetooth security options.
Security mode
When the Bluetooth Visibility is turned on, your phone is
wirelessly transmitting its phone name and status. This
transmission can pose a security risk and invite unauthorized
connection to your phone. It is recommended that you activate
your phone’s Bluetooth security.
ᮣ
Highlight the option (Off/On/Custom) and press Select (LSK)
or
ᮣ
Highlight On or Off and press Select (LSK) or
.
.
Changing Your Settings
113
–
Object push: used to exchange personal data such as name cards and
Phonebook contacts between Bluetooth devices.
SIM access: used to provide access to the SIM card through Bluetooth.
Phonebook access: used to export phonebook data to BLuetooth
devices.
Remote SIM mode
This mode allows you to control whether a Bluetooth car kit can
access the contact information stored on your phone’s SIM card.
–
–
ᮣ
Press On or Off and press Select (LSK) or
.
Features
Help
The Bluetooth specification describes how Bluetooth short-range
wireless technology works, and service profiles, or features,
describe the services supported by individual devices. Profiles
improve the chances that different devices can communicate.
Launches the web2go browser and the T-Mobile Help menu for
general help information.
Manage Online Album
This menu allows you to manage the addresses for Flickr, Kodak,
Photobucket, or Snapfish.
Your phone supports these Bluetooth features:
–
–
–
–
–
–
–
Headset: used to make incoming and outgoing calls via Bluetooth
headsets.
Handsfree: used to make incoming and outgoing calls via Bluetooth
handsfree car kits.
Bluetooth stereo headset: used to make calls and listen to music via
Bluetooth stereo headset.
Serial port: used to connect to other Bluetooth devices via a virtual
serial port.
Dial-up: used to provide Internet access for Bluetooth devices via a
phone’s modem.
Basic printing: used to print images, text, and personal data such as
name cards and appointments via a Bluetooth printer.
File transfer: used to transfer files to and from Bluetooth devices.
1. From Home screen, press Menu (LSK) ➔ Settings ➔
Manage Online Album.
2. Select one of the services, Flickr
,
Kodak, Photobucket, or
Snapfish and press View. (LSK)
3. Press Edit (LSK) and enter a new Email address in the
Email address field.
4. Press
to save your entry.
114
Show My Number
Call settings
Use Call settings to customize your phone’s call functions.
Use the Show my number setting to control how your phone
number is displayed when you make a call.
Answering mode
1. From Home screen, press Menu (LSK) ➔ Settings
settings Show my number
➔
Call
Answering Mode allows you to select how your phone answers
incoming calls.
➔
.
2. Highlight an option and press Save (LSK). Options include
1. From Home screen, press Menu (LSK) ➔ Settings
settings Answering mode
➔
Call
➔
.
• Set by network: uses the network’s settings to determine whether
your phone number is displayed.’
2. Highlight an option, then press Save
(
) to update your
• Show number: displays your information to the recipient.
selection. Options include:
• Hide number: hides your information from the recipient.
• Send key: answers the call when the Send key is pressed.
• Open flip: answers the call when the phone is opened.
• Any key: answers the call when any key on the keypad is pressed.
Auto block
This feature allows you to block specific types of incoming and
outgoing calls on your phone based on a phone number. This is
useful if you allow someone to use your phone for a short period
of time.
Auto redial
You can have the phone automatically redial the last number if
the call was cut off or did not connect.
1. From Home screen, press Menu (LSK) ➔ Settings
Call settings Auto block
➔
1. From Home screen, press Menu (LSK) ➔ Settings
Call settings Auto redial
➔
➔
.
➔
.
2. Highlight the Activation field and press the right Navigation
2. Highlight a selection and press Save (LSK). Options include:
key to enable the feature.
• Off: the phone will not automatically redial the last number.
3. Highlight Block list and press Edit
(
).
• On: the phone will automatically redial the number.
Changing Your Settings
115
4. Add or edit the current block list:
3. In the Forward to field, enter the number to which calls
should be forwarded. The current status displays. If the
option was previously set, the Forward to number displays.
•
•
Unknown blocks all incoming calls from unknown phone numbers.
Add additional numbers by pressing Options (LSK) Add new
to save the new numbers.
➔
.
5. Press Save (LSK) or
Tip: To enter an international code, press and hold the
key until the +
Call Forwarding
sign displays.
This network service enables incoming calls to re-route to a
secondary number that you specify.
4. Press Options (LSK), then select Activate
.
5. Press Back to go back to activate additional call forwarding
Example: You may wish to forward your business calls to a colleague while
options.
you are on holiday.
To deactivate call forwarding:
To activate call forwarding:
1. From Home screen, press Menu (LSK) ➔ Settings
settings Call forwarding
➔
Call
1. From Home screen, press Menu (LSK) ➔ Settings
settings Call forwarding
➔
Call
➔
.
➔
.
2. Select an available option, then press Select (LSK).
2. Select an available option, then press Select (LSK).
• Always: all calls are forwarded until this setting is changed.
• Always: all calls are forwarded until this setting is changed.
• If busy: calls are forwarded when you are already on another call.
• If busy: calls are forwarded when you are already on another call.
• If no reply: calls are forwarded when you do not answer the phone.
• If no reply: calls are forwarded when you do not answer the phone
for a specified time period (set when you activate call forwarding).
• If out of reach: calls are forwarded when you are not in an area
covered by T-Mobile, or when your phone is switched off.
• If out of reach: calls are forwarded when you are not in an area
covered by T-Mobile, or when your phone is switched off.
• Cancel all: cancels all call forwarding settings.
3. Press Options (LSK), then select Deactivate
.
• Cancel all: cancels all call forwarding settings.
116
Call Barring (SIM Card Dependent)
Call Status Tones
Call Barring allows you to restrict specific types of incoming and
dialed calls on your phone. This is useful if you allow someone to
use your phone for a short period of time.
This option allows you to activate the phone to alert you to
changes in call status.
1. From Home screen, press Menu (LSK) ➔ Settings
settings Call status tones
2. Press to check/uncheck the following options:
➔
Call
Call Waiting
➔
.
Call waiting is a network service which informs you when
someone is trying to reach you during another call. You can
specify individual call waiting options for voice calls and/or data
calls.
• Call connect tone: an alert is played when the call is connected.
• Minute minder: an alert plays at one-minute intervals.
• Call end tone: an alert plays when the call is disconnected.
3. Press Options (LSK) ➔ Save or press the Back soft key.
To set your call waiting options:
1. From Home screen, press Menu (LSK) ➔ Settings
settings Call waiting
2. Press Options (LSK) ➔ Deactivate or Activate
– or –
➔
Call
Alerts on Call
➔
.
Specify whether the phone will use sounds to alert you to
incoming messages or calls during a call.
.
1. From Home screen, press Menu (LSK) ➔ Settings
settings Alerts on call
2. Highlight Off or On and press Save (LSK) or
➔
Call
Press Options (LSK) ➔ Check status to confirm your current
➔
.
call waiting status.
.
Changing Your Settings
117
Call time
Auto Reply
Create a text message to be sent to the caller when you choose
to Reject an incoming call.
This menu lets you view the time log for calls both made and
received.
1. From Home screen, press Menu (LSK) ➔ Settings
settings Auto reply
2. In the Activation field, use the Left and Right Navigation
keys to choose On or Off
➔
Call
Important!: The actual time invoiced by T-Mobile may differ from times
➔
.
displayed due to network features and service plan.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings
settings Call history management Call time
The following time logs are available:
➔
Call
.
➔
➔
.
3. Use the Down Navigation key to move to the Reply to send
field, then enter the text of the reply message.
•
•
Last call time: shows the length of your last call.
Total incoming: shows the total length of all calls you have received
since the timer was last reset.
4. Press Options (LSK) and select Save to store the message.
Call History Management
•
•
Total outgoing: shows the total length of all calls you have made since
the timer was last reset.
This menu allows you to manage your call history. You can view
time logs for all calls dialed and received, as well as delete call
history.
Life time: shows the total length of time for all incoming and dialed
calls. This information cannot be cleared.
ᮣ
From Home screen, press Menu (LSK) ➔ Settings
settings Call history management
➔
Call
➔
.
118
Delete all history
Network
This menu allows you to delete all of the call history, or you can
delete missed calls, dialed calls, or answered calls.
Use the Network setting select the network when roaming
outside of your home area.
1. From Home screen, press Menu (LSK) ➔ Settings
settings Call history management
2. Select Delete all history and press Select (LSK) or
➔
Call
Note: You can select a network other than your home network only if there is
➔
.
a valid roaming agreement between the two.
.
To select a network:
3. Highlight options, then press
next to your selection(s).
to place a check mark
1. From Home screen, press Menu (LSK) ➔ Settings
Advanced Network
2. Select Search now
➔
➔
.
• All calls: deletes all call history.
.
• Missed calls: deletes all missed call history.
• Dialed calls: deletes all dialed call history.
3. Highlight a network and press Select (LSK) or
.
To change your Default setup:
• Answered calls: deletes all answered call history.
• Voice mail: deletes all voicemail history.
1. From Home screen, press Menu (LSK) ➔ Settings
➔
Advanced
2. Select Default setup
3. Highlight an option and press Select (LSK) or
➔
Network.
4. Press Delete to delete the selected records.
.
Advanced
Advanced settings allow you to select and manage your
networks, update software, and reset all your settings.
:
• Automatic: you are connected to the first available network when
roaming.
• Manual: search for available networks and make a selection.
Changing Your Settings
119
Software Update
5. At the Reset settings? prompt, press Yes (LSK) to reset the
settings.
Use the Software Update setting to check for upgrades and
upload them directly to your phone.
Master reset
1. From Home screen, press Menu (LSK) ➔ Settings
Advanced Software update
➔
From this menu you can reset your phone and sound settings to
the factory default settings.
➔
.
2. Follow the on-screen instructions.
1. From Home screen, press Menu (LSK) ➔ Settings
settings Master reset
2. Enter your phone password and press Confirm (LSK).
➔
Reset
➔
.
Reset settings
Use Reset settings to set phone settings to their default settings.
The following options are available:
3. Press Yes (LSK) to reset your settings or No (RSK) to cancel.
–
–
–
–
All: Phone, Display, and Sound, are returned to default values.
Phone settings: only phone settings are returned to default values.
Display settings: only display settings are returned to default values.
Sound profiles: only sound settings are returned to default values.
Once reset, the phone reboots.
To reset your settings:
1. From Home screen, press Menu (LSK) ➔ Settings
➔
Reset
settings
2. Highlight individual options or highlight All, and press Mark
) to mark selections.
3. Press Reset (LSK).
4. Enter your password and press Confirm
➔
Reset settings.
(
.
120
Section 12: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. The terms “mobile device” or “cell phone” are used
in this section to refer to your phone. Read this information before
The low levels of RF cell phones emit while in use are in the
microwave frequency range. They also emit RF at substantially
reduced time intervals when in the stand-by mode. Whereas high
levels of RF can produce health effects (by heating tissue),
exposure to low level RF that does not produce heating effects
causes no known adverse health effects.
using your mobile device
.
Exposure to Radio Frequency (RF) Signals
The U.S. Food and Drug Administration (FDA) has published
information for consumers relating to Radio Frequency (RF)
exposure from wireless phones. The FDA publication includes the
following information:
The biological effects of radio frequency energy should not be
confused with the effects from other types of electromagnetic
energy.
Very high levels of electromagnetic energy, such as is found in
X-rays and gamma rays, can ionize biological tissues. Ionization
is a process where electrons are stripped away from their normal
locations in atoms and molecules. It can permanently damage
biological tissues including DNA, the genetic material.
Do cell phones pose a health hazard?
Many people are concerned that cell phone radiation will cause
cancer or other serious health hazards. The weight of scientific
evidence has not linked cell phones with any health problems.
Cell phones emit low levels of Radio Frequency (RF) energy. Over
the past 15 years, scientists have conducted hundreds of studies
looking at the biological effects of the radio frequency energy
emitted by cell phones. While some researchers have reported
biological changes associated with RF energy, these studies have
failed to be replicated. The majority of studies published have
failed to show an association between exposure to radio
frequency from a cell phone and health problems.
The energy levels associated with radio frequency energy,
including both radio waves and microwaves, are not great
enough to cause ionization of atoms and molecules. Therefore,
RF energy is a type of non-ionizing radiation. Other types of
non-ionizing radiation include visible light, infrared radiation
(heat), and other forms of electromagnetic radiation with
relatively low frequencies.
Health and Safety Information
121
While RF energy does not ionize particles, large amounts can
increase body temperatures and cause tissue damage. Two
areas of the body, the eyes and the testes, are particularly
vulnerable to RF heating because there is relatively little blood
flow in them to carry away excess heat.
Results of this study did NOT show that cell phones caused brain
cancer. In this study, most people had no increased risk of brain
cancer from using cell phones. For people with the heaviest use
of cell phones (an average of more than ½ hour per day, every
day, for over 10 years) the study suggested a slight increase in
brain cancer. However, the authors determined that biases and
errors prevented any conclusions being drawn from this data.
Additional information about Interphone can be found at
Research Results to Date: Is there a connection between
RF and certain health problems?
The results of most studies conducted to date say no. In addition,
attempts to replicate and confirm the few studies that have
shown a connection have failed.
Interphone is the largest cell phone study to date, but it did not
answer all questions about cell phone safety. Additional research
is being conducted around the world, and the FDA continues to
monitor developments in this field.
The scientific community at large therefore believes that the
weight of scientific evidence does not show an association
between exposure to Radio Frequency (RF) from cell phones and
adverse health outcomes. Still the scientific community has
supported additional research to address gaps in knowledge.
Some of these studies are described below.
International Cohort Study on Mobile Phone Users (COSMOS)
The COSMOS study aims to conduct long-term health monitoring
of a large group of people to determine if there are any health
issues linked to long-term exposure to radio frequency energy
from cell phone use. The COSMOS study will follow
Interphone Study
Interphone is a large international study designed to determine
whether cell phones increase the risk of head and neck cancer. A
report published in the International Journal of Epidemiology
(June, 2010) compared cell phone usage for more than 5,000
people with brain tumors (glioma and meningioma) and a similar
number of healthy controls.
approximately 300,000 adult cell phone users in Europe for 20 to
30 years. Additional information about the COSMOS study can be
found at http://www.ukcosmos.org/index.html
.
122
RiskofBrainCancerfromExposuretoRadioFrequencyFields
in Childhood and Adolescence (MOBI-KIDS)
Cell Phone Industry Actions
Although the existing scientific data do not justify FDA regulatory
actions, the FDA has urged the cell phone industry to take a
number of steps, including the following:
between exposure to radio frequency energy from
communication technologies including cell phones and brain
study involving 14 European and non-European countries.
Additional information about MOBI-KIDS can be found at
http://www.creal.cat/programes-recerca/projectes-creal/
•
•
•
Support-needed research on possible biological effects of RF for
the type of signal emitted by cell phones;
Design cell phones in a way that minimizes any RF exposure to the
user; and
Cooperate in providing users of cell phones with the current
information on cell phone use and human health concerns.
view.php?ID=39
.
Surveillance, Epidemiology, and End Results (SEER) Program
of the National Cancer Institute
The FDA also is working with voluntary standard-setting bodies
such as the Institute of Electrical and Electronics Engineers
(IEEE), the International Commission on Non-Ionizing Radiation
Protection (ICNIRP), and others to assure that safety standards
continue to adequately protect the public.
statistics in the United States to detect any change in rates of
new cases for brain cancer. If cell phones play a role in risk for
brain cancer, rates should go up, because heavy cell phone use
has been common for quite some time in the U.S. Between 1987
and 2005, the overall age-adjusted incidence of brain cancer did
not increase. Additional information about SEER can be found at
http://seer.cancer.gov/
.
Health and Safety Information
123
Reducing Exposure: Hands-Free Kits and Other
Accessories
Steps to Reduce Exposure to Radio Frequency Energy
kits reduce risks. Hands-free kits can be used for convenience
and comfort. They are also required by law in many states if you
want to use your phone while driving.
Cell Phone Accessories that Claim to Shield the Head from
RF Radiation
If there is a risk from being exposed to radio frequency energy
(RF) from cell phones - and at this point we do not know that
there is - it is probably very small. But, if you are concerned
about avoiding even potential risks, you can take a few simple
steps to minimize your RF exposure.
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that accessories
which claim to shield the head from those emissions reduce
risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike “hands-free” kits, these so-called “shields”
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption.
•
•
Reduce the amount of time spent using your cell phone;
Use speaker mode or a headset to place more distance between your
head and the cell phone.
Hands-Free Kits
Hands-free kits may include audio or Bluetooth® headsets and
various types of body-worn accessories such as belt-clips and
holsters. Combinations of these can be used to reduce RF energy
absorption from cell phones.
Children and Cell Phones
Headsets can substantially reduce exposure because the phone
is held away from the head in the user's hand or in approved
body-worn accessories. Cell phones marketed in the U.S. are
required to meet RF exposure compliance requirements when
used against the head and against the body.
The scientific evidence does not show a danger to any users of
cell phones from RF exposure, including children and teenagers.
The steps adults can take to reduce RF exposure apply to
children and teenagers as well.
•
•
Reduce the amount of time spent on the cell phone;
Because there are no known risks from exposure to RF emissions
from cell phones, there is no reason to believe that hands-free
Use speaker mode or a headset to place more distance between the
head and the cell phone.
124
Some groups sponsored by other national governments have
advised that children be discouraged from using cell phones at
all. For example, The Stewart Report from the United Kingdom
made such a recommendation in December 2000. In this report,
a group of independent experts noted that no evidence exists that
using a cell phone causes brain tumors or other ill effects. Their
recommendation to limit cell phone use by children was strictly
precautionary; it was not based on scientific evidence that any
health hazard exists.
•
•
•
International Commission on Non-Ionizing Radiation Protection:
Health Protection Agency:
US Food and Drug Administration:
http://www.fda.gov/Radiation-EmittingProducts/
RadiationEmittingProductsandProcedures/
Specific Absorption Rate (SAR) Certification
Information
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
Radio Frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. Government.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(updated 10/1/2010):
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
These FCC exposure limits are derived from the
recommendations of two expert organizations: the National
Council on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
Occupational Safety and Health Administration (OSHA):
(Note: This web address is case sensitive.)
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
•
•
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Health and Safety Information
125
Absorption Rate (SAR). The SAR is a measure of the rate of
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
contains no metal and that positions the mobile device a
minimum of 1.5 cm from the body.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
GSM 850 (Part 22)
•
•
Head: 0.26 W/Kg.
Body-worn: 0.66 W/Kg.
GSM 1900 (Part 24)
•
•
Head: 0.36 W/Kg.
Body-worn: 0.53 W/Kg.
AWS WCDMA (Part 27)
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
•
•
Head: 0.52 W/Kg.
Body-worn: 0.37 W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
For body-worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
126
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
Check the laws and regulations on the use of mobile devices and
their accessories in the areas where you drive. Always obey them.
The use of these devices may be prohibited or restricted in certain
areas. For example, only hands-free use may be permitted in
certain areas.
obtained at www.fcc.gov/cgb/sar
.
Before answering calls, consider your circumstances. Let the call
go to voicemail when driving conditions require. Remember,
driving comes first, not the call!
Smart Practices While Driving
On the Road - Off the Phone
If you consider a call necessary and appropriate, follow these
tips:
The primary responsibility of every driver is the safe operation of
his or her vehicle.
•
•
•
•
•
•
Use a hands-free device;
Responsible drivers understand that no secondary task should be
performed while driving whether it be eating, drinking, talking to
passengers, or talking on a mobile phone - unless the driver has
assessed the driving conditions and is confident that the
secondary task will not interfere with their primary responsibility.
Do not engage in any activity while driving a moving vehicle which
may cause you to take your eyes off the road or become so
absorbed in the activity that your ability to concentrate on the act
of driving becomes impaired. Samsung is committed to promoting
responsible driving and giving drivers the tools they need to
understand and address distractions.
Secure your phone within easy reach;
Place calls when you are not moving;
Plan calls when your car will be stationary;
Do not engage in stressful or emotional conversations;
Let the person with whom you are speaking know that you are driving
and will suspend the call if necessary;
•
Do not take notes or look up phone numbers while driving;
Notice regarding legal restrictions on mounting this device in an
automobile:
Laws in some states may prohibit mounting this device on or
near the windshield of an automobile. In other states, the law
may permit mounting this device only in specific locations in the
Health and Safety Information
127
automobile. Be sure to consult the state and local laws or
ordinances where you drive before mounting this device in an
automobile. Failure to comply with these restrictions could result
in fines, penalties, or other damages.
phone and/or battery get wet, have them checked by your service
provider or contact Samsung, even if they appear to be working
properly.
•
Do not place your battery in or near a heat source. Excessive
heating can damage the phone or the battery and could cause the
phone or the battery to explode. Do not dry a wet or damp battery with
an appliance or heat source such as a microwave oven, hair dryer,
iron, or radiator. Avoid leaving your phone in your car in high
temperatures.
Never mount this device in a manner that will obstruct the
driver's clear view of the street and traffic.
Never use wireless data services such as text messaging, Web
browsing, or e-mail while operating a vehicle.
Never watch videos, such as a movie or clip, or play video games
while operating a vehicle.
•
•
Do not dispose of the phone or the battery in a fire. The phone or the
battery may explode when overheated.
.
Do not handle a damaged or leaking battery. Do not let leaking battery
fluid come in contact with your eyes, skin or clothing. For safe disposal
options, contact your nearest Samsung-authorized service center.
Battery Use and Safety
Important!: Handle and store batteries properly to avoid injury or damage
.
•
Avoid dropping the cell phone. Dropping the phone or the battery,
especially on a hard surface, can potentially cause damage to the
phone and battery. If you suspect damage to the phone or battery, take
it to a service center for inspection.
Most battery issues arise from improper handling of batteries
and, particularly, from the continued use of damaged batteries.
•
•
Do not disassemble, crush, puncture, shred, or otherwise attempt
to change the form of your battery. Do not put a high degree of
pressure on the battery. This can cause leakage or an internal short-
circuit, resulting in overheating.
Do not let the phone or battery come in contact with liquids.
Liquids can get into the phone's circuits, leading to corrosion. Even
when the phone appears to be dry and appears to operate normally,
the circuitry could slowly corrode and pose a safety hazard. If the
128
•
Never use any charger or battery that is damaged in any way
.
•
Misuse or use of incompatible phones, batteries, and charging
devices could result in damage to the equipment and a possible
risk of fire, explosion, or leakage, leading to serious injuries,
Do not allow the battery to touch metal objects. Accidental
short-circuiting can occur when a metallic object (coin, key, jewelry,
clip, or pen) causes a direct connection between the + and - terminals
of the battery (metal strips on the battery), for example when you carry
a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
damages to your phone, or other serious hazard
.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile devices and genuine
Samsung accessories.
Important!: Important: Use only Samsung-approved batteries, and recharge
your battery only with Samsung-approved chargers which are
specifically designed for your phone.
Proper disposal of your mobile device and its battery is not only
important for safety, it benefits the environment. Batteries must
be recycled or disposed of properly.
Recycling programs for your mobile device, batteries, and
accessories may not be available in your area.
Warning!: Warning: Use of a non-Samsung-approved battery or charger may
present a risk of fire, explosion, leakage, or other hazard
.
Samsung's warranty does not cover damage to the phone caused
by non-Samsung-approved batteries and/or chargers.
We've made it easy for you to recycle your old Samsung mobile
device by working with respected take-back companies in every
state in the country.
•
Do not use incompatible cell phone batteries and chargers. Some
websites and second-hand dealers not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier-recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
Drop It Off
You can drop off your Samsung-branded mobile device and
batteries for recycling at one of our numerous Samsung
Recycling Direct (SM) locations. A list of these locations may be
.
Health and Safety Information
129
Samsung-branded devices and batteries will be accepted at
these locations for no fee.
Warning!: Never dispose of batteries in a fire because they may explode.
Consumers may also recycle their used mobile device or
batteries at many retail or carrier-provided locations where
mobile devices and batteries are sold. Additional information
regarding specific locations may be found at:
UL Certified Travel Charger
The Travel Charger for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines:
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE
PROPERTY DAMAGE.
.
Mail It In
The Samsung Mobile Take-Back Program will provide Samsung
customers with a free recycling mailing label. Just go to
yle_your_phone_page and follow the instructions to print out a
free pre-paid postage label and then send your old mobile
device or battery to the address listed, via U.S. Mail, for
recycling.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF
THE PROPER CONFIGURATION FOR THE POWER
OUTLET.
Follow local regulations regarding disposal of mobile devices
and batteries
THIS POWER UNIT IS INTENDED TO BE CORRECTLY
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR
MOUNT POSITION.
Dispose of your mobile device and batteries in accordance with
local regulations. In some areas, the disposal of these items in
household or business trash may be prohibited. Help us protect
the environment - recycle!
130
Display / Touch-Screen
GPS & AGPS
Please note the following information when using your mobile
device:
Certain Samsung mobile devices can use a Global Positioning
System (GPS) signal for location-based applications. A GPS uses
satellites controlled by the U.S. Government that are subject to
changes implemented in accordance with the Department of
Defense policy and the 2008 Federal Radio navigation Plan (FRP).
Changes may affect the performance of location-based
technology on your mobile device.
WARNING REGARDING DISPLAY
The display on your mobile device is made of glass or
acrylic and could break if your mobile device is dropped or
if it receives significant impact. Do not use if screen is
broken or cracked as this could cause injury to you.
Certain Samsung mobile devices can also use an Assisted Global
Positioning System (AGPS), which obtains information from the
cellular network to improve GPS performance. AGPS uses your
wireless service provider's network and therefore airtime, data
charges, and/or additional charges may apply in accordance with
your service plan. Contact your wireless service provider for
details.
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN
MOBILE DEVICE
If your mobile device has a touch-screen display, please
note that a touch-screen responds best to a light touch
from the pad of your finger or a non-metallic stylus. Using
touch-screen may damage the tempered glass surface
and void the warranty. For more information, refer to
“Standard Limited Warranty” on page 140.
Your Location
Location-based information includes information that can be
used to determine the approximate location of a mobile device.
Mobile devices which are connected to a wireless network
transmit location-based information. Additionally, if you use
applications that require location-based information (e.g. driving
directions), such applications transmit location-based
information. The location-based information may be shared with
third-parties, including your wireless service provider,
Health and Safety Information
131
applications providers, Samsung, and other third-parties
providing services.
Emergency Calls
This mobile device, like any wireless mobile device, operates
using radio signals, wireless and landline networks, as well as
user-programmed functions, which cannot guarantee connection
in all conditions, areas, or circumstances. Therefore, you should
never rely solely on any wireless mobile device for essential
communications (medical emergencies, for example). Before
traveling in remote or underdeveloped areas, plan an alternate
method of contacting emergency services personnel. Remember,
to make or receive any calls, the mobile device must be switched
on and in a service area with adequate signal strength.
Use of AGPS in Emergency Calls
When you make an emergency call, the cellular network may
activate AGPS technology in your mobile device to tell the
emergency responders your approximate location.
AGPS has limitations and might not work in your area. Therefore:
•
Always tell the emergency responder your location to the best of your
ability; and
•
Remain on the mobile device for as long as the emergency responder
instructs you.
Emergency calls may not be possible on all wireless mobile
device networks or when certain network services and/or mobile
device features are in use. Check with local service providers.
Navigation
Maps, directions, and other navigation data may contain
inaccurate or incomplete data, and circumstances can and do
change over time. In some areas, complete information may not
be available. Therefore, you should always visually confirm that
the navigational instructions are consistent with what you see
before following them. All users should pay attention to road
conditions, closures, traffic, and all other factors that may impact
To make an emergency call:
1. If the mobile device is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
safe driving or walking. Always obey posted road signs
.
3. Press the
key.
132
If certain features are in use (call blocking, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult your User Manual and your local cellular
service provider. When making an emergency call, remember to
give all the necessary information as accurately as possible.
Remember that your mobile device may be the only means of
communication at the scene of an accident; do not cut off the call
until given permission to do so.
Extreme heat or cold
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.
Microwaves
Do not try to dry your mobile device in a microwave oven.
Doing so may cause a fire or explosion.
Dust and dirt
Do not expose your mobile device to dust, dirt, or sand.
Care and Maintenance
Cleaning solutions
Your mobile device is a product of superior design and
craftsmanship and should be treated with care. The suggestions
below will help you fulfill any warranty obligations and allow you
to enjoy this product for many years:
Do not use harsh chemicals, cleaning solvents, or strong
detergents to clean the mobile device. Wipe it with a soft cloth
slightly dampened in a mild soap-and-water solution.
Shock or vibration
Keep your Samsung Mobile Device away from:
Liquids of any kind
Do not drop, knock, or shake the mobile device. Rough
handling can break internal circuit boards.
Keep the mobile device dry. Precipitation, humidity, and liquids
contain minerals that will corrode electronic circuits. If the
mobile device does get wet, do not accelerate drying with the
use of an oven, microwave, or dryer, because this may damage
the mobile device and could cause a fire or explosion. Do not
use the mobile device with a wet hand. Doing so may cause an
electric shock to you or damage to the mobile device.
Paint
Do not paint the mobile device. Paint can clog the device’s
moving parts or ventilation openings and prevent proper
operation.
Health and Safety Information
133
You should follow some common sense recommendations when
using any portable audio device:
Responsible Listening
Caution!: Avoid potential hearing loss
.
•
•
•
•
Always turn the volume down before plugging the earphones into an
audio source.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cell phones, at high volume settings for long durations may lead
to permanent noise-induced hearing loss. This includes the use
of headphones (including headsets, earbuds, and Bluetooth® or
other wireless devices). Exposure to very loud sound has also
been associated in some studies with tinnitus (a ringing in the
ear), hypersensitivity to sound, and distorted hearing. Individual
susceptibility to noise-induced hearing loss and potential hearing
problem varies. Additionally, the amount of sound produced by a
portable audio device varies depending on the nature of the
sound, the device settings, and the headphones that are used. As
a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings, and
equipment.
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
Be aware that you can adapt to higher volume settings over time, not
realizing that the higher volume may be harmful to your hearing.
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
134
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech, or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
Suite 9200
Patriots Plaza Building
You can obtain additional information on this subject from the
following sources:
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
1-888-232-6348 TTY
Email: [email protected]
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
Operating Environment
Remember to follow any special regulations in force in any area,
and always switch your mobile device off whenever it is
forbidden to use it, or when it may cause interference or danger.
When connecting the mobile device or any accessory to another
device, read its user's guide for detailed safety instructions. Do
not connect incompatible products.
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
Health and Safety Information
135
Using Your Mobile Device Near Other Electronic Devices
For more information see: http://www.fcc.gov/oet/rfsafety/rf-
faqs.html#
.
Most modern electronic equipment is shielded from Radio
Frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
mobile device. Consult the manufacturer to discuss alternatives.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your mobile
device off in health care facilities when any regulations posted in
these areas instruct you to do so. Hospitals or health care
facilities may be using equipment that could be sensitive to
external RF energy.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless mobile device and an implantable
medical device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Persons who have such devices:
Vehicles
•
Should ALWAYS keep the mobile device more than six (6) inches from
their implantable medical device when the mobile device is turned ON;
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle before
using your mobile device in a motor vehicle. You should also
consult the manufacturer of any equipment that has been added
to your vehicle.
•
•
Should not carry the mobile device in a breast pocket;
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
•
•
Should turn the mobile device OFF immediately if there is any reason
to suspect that interference is taking place;
Posted Facilities
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless mobile device with an implantable medical device,
consult your health care provider.
Switch your mobile device off in any facility where posted notices
require you to do so.
136
Potentially Explosive Environments
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities. While some wireless mobile devices are used near
some hearing devices (hearing aids and cochlear implants),
users may detect a buzzing, humming, or whining noise. Some
hearing devices are more immune than others to this
interference noise, and mobile devices also vary in the amount of
interference they generate.
Switch your mobile device off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death. Users are advised to switch the mobile
device off while at a refueling point (service station). Users are
reminded of the need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and distribution areas),
chemical plants, or where blasting operations are in progress.
Areas with a potentially explosive atmosphere are often, but not
always, clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust, or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
The wireless telephone industry has developed a rating system
for wireless mobile devices to assist hearing device users find
mobile devices that may be compatible with their hearing
devices. Not all mobile devices have been rated. Mobile devices
that are rated have the rating on their box or a label located on
the box.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated mobile device successfully. Trying out the mobile
device with your hearing device is the best way to evaluate it for
your personal needs.
FCC Hearing Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless mobile devices under the Hearing Aid
Compatibility Act of 1988 (HAC Act) to require digital wireless
mobile devices be compatible with hearing aids.
M-Ratings: Mobile devices rated M3 or M4 meet FCC
requirements and are likely to generate less interference to
hearing devices than mobile devices that are not labeled. M4 is
the better/higher of the two ratings.
Health and Safety Information
137
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements
and are likely to generate less interference to hearing devices
than mobile devices that are not labeled. T4 is the better/higher
of the two ratings.
usage” while using their hearing aid with the particular wireless
mobile device.
“Normal usage” in this context is defined as a signal quality that
is acceptable for normal operation. The M mark is intended to be
synonymous with the U mark. The T mark is intended to be
synonymous with the UT mark. The M and T marks are
recommended by the Alliance for Telecommunications Industries
Solutions (ATIS). The U and UT marks are referenced in Section
20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless mobile device rating values are then added together.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Restricting Children's Access to Your
Mobile Device
Your mobile device is not a toy. Do not allow children to play with
it because they could hurt themselves and others, damage the
mobile device, or make calls that increase your mobile device
bill.
T3
+
T2
=
5
M3
+
M2
=
5
Keep the mobile device and all its parts and accessories out of
the reach of small children.
In the above example, if a hearing aid meets the M2 level rating
and the wireless mobile device meets the M3 level rating, the
sum of the two values equal M5. This is synonymous for T
ratings. This should provide the hearing aid user with “normal
138
FCC Notice and Cautions
FCC Notice
Other Important Safety Information
Only qualified personnel should service the mobile device or install the
mobile device in a vehicle. Faulty installation or service may be
dangerous and may invalidate any warranty applicable to the device.
•
The mobile device may cause TV or radio interference if used in
close proximity to receiving equipment. The FCC can require you
to stop using the mobile device if such interference cannot be
eliminated. Vehicles using liquefied petroleum gas (such as
propane or butane) must comply with the National Fire Protection
Standard (NFPA-58). For a copy of this standard, contact the
National Fire Protection Association.
•
•
•
Ensure that any mobile devices or related equipment installed in your
vehicle are securely mounted.
Check regularly that all wireless mobile device equipment in your
vehicle is mounted and operating properly.
Do not store or carry flammable liquids, gases, or explosive materials
in the same compartment as the mobile device, its parts, or
accessories.
Cautions
Any changes or modifications to your mobile device not expressly
approved in this document could void your warranty for this
equipment and void your authority to operate this equipment.
Only use approved batteries, antennas, and chargers. The use of
any unauthorized accessories may be dangerous and void the
mobile device warranty if said accessories cause damage or a
defect to the mobile device. Although your mobile device is quite
sturdy, it is a complex piece of equipment and can be broken.
Avoid dropping, hitting, bending, or sitting on it.
•
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including installed or
portable wireless equipment near or in the area over the air bag or in
the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
•
•
Switch your mobile device off before boarding an aircraft. The use of
wireless mobile devices in aircraft is illegal and may be dangerous to
the aircraft's operation. Check with appropriate authorities before
using any function of a mobile device while on an aircraft.
Failure to observe these instructions may lead to the suspension or
denial of cell phone services to the offender, or legal action, or both.
Health and Safety Information
139
Section 13: Warranty Information
Standard Limited Warranty
items, including framing, and any non-operative parts unless caused by
SAMSUNG; (b) defects or damage resulting from excessive force when
pressing on a touch screen; (c) equipment that has the serial number or
the enhancement data code removed, defaced, damaged, altered or
made illegible; (d) any plastic surfaces or other externally exposed parts
that are scratched or damaged due to normal use; (e) malfunctions
resulting from the use of Product in conjunction or connection with
accessories, products, or ancillary/peripheral equipment not furnished or
approved by SAMSUNG; (f) defects or damage from improper testing,
operation, maintenance, installation, service, or adjustment not
furnished or approved by SAMSUNG; (g) defects or damage from
external causes such as collision with an object, or from fire, flooding,
sand, dirt, windstorm, lightning, earthquake, or from exposure to
weather conditions, or battery leakage, theft, blown fuse, or improper
use of any electrical source; (h) defects or damage caused by cellular
signal reception or transmission, or viruses or other software problems
introduced into the Product; (i) any other acts which are not the fault of
SAMSUNG; or (j) Product used or purchased outside the United States.
This Limited Warranty covers batteries only if battery capacity falls
below 80% of rated capacity or the battery leaks, and this Limited
Warranty does not cover any battery if (i) the battery has been charged
by a battery charger not specified or approved by SAMSUNG for charging
the battery, (ii) any of the seals on the battery are broken or show
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper
use of Product by Purchaser. This Limited Warranty does not cover: (a)
defects or damage resulting from accident, misuse, abnormal use,
abnormal conditions, improper storage, exposure to moisture or
dampness, neglect, unusual physical, electrical or electromechanical
stress, or defects in appearance, cosmetic, decorative or structural
140
evidence of tampering, or (iii) the battery has been used in equipment
other than the SAMSUNG phone for which it is specified.
must pay all parts, shipping, and labor charges for the repair or
return of such Product.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the original date of purchase, the serial number of
Product and the sellers' name and address. To obtain assistance
on where to deliver the Product, call Samsung Customer Care at
1-888-987-4357. Upon receipt, SAMSUNG will promptly repair
or replace the defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
What Are The Limits On Samsung's Warranty/liability? EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
components when repairing any Product or replace Product with
a rebuilt, reconditioned or new Product. Repaired/replaced cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG. If SAMSUNG determines that
any Product is not covered by this Limited Warranty, Purchaser
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
Warranty Information
141
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW
PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-
PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this
allocation of risk and the limitations of liability contained in this Limited
Warranty. The agents, employees, distributors, and dealers of SAMSUNG
are not authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG. Accordingly,
additional statements such as dealer advertising or presentation,
142
whether oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2010 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [021710]
End User License Agreement for Software
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
Warranty Information
143
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
144
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
Warranty Information
145
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
146
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©
2011 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
147
Index
Adding 56
A
C
ABC mode 30
Calendar 77
Call
History 20
Accessing a Menu Function 28
Audio Postcard 44
Auto Block 115
B
Camcorder Shortcuts
Camera 92
Charging Battery 8
Contact 53
Number 53
Backlight
Description 17
Settings 104
Battery
Charging 8
Installing 6
Low Indicator 9
Removing 6
Call History 20
Making a Call from Phonebook 19
Battery Use & Safety 128
Bluetooth
Delete All Entries 22
Call Records
About 112
Features 114
Searching for New Devices 113
Turning Bluetooth On and Off 113
All calls 20
Delete all 22
Dialed calls 22
Missed calls 21
148
D
F
Flickr 114
Font Size
Main Display 103
Front Display
G
Getting Started 4, 28
Visual Voicemail 10
GPS & AGPS 131
I
K
Default Destination
Images 66
Dialing a Number
Phonebook 55
Settings 104
Kodak 114
Dialing Display 103
Display 17
M
Backlight 17
Icons 15
Display / Touch-Screen 131
Do cell phones pose a health hazard?
121
Message Inbox
Viewing an Incoming Picture
Message 42
Text Message 49
Text Message Center 49
Message settings
Picture message 49
E
Emergency Calls 132
Entering Text 30
Using ABC Mode 33
Using Symbol Mode 34
Using T9 Mode 31
Exposure to Radio Frequency (RF) Sig-
nals 121
H
HAC Mode 106
Health and Safety Information 121
Help 17, 112
149
Messages 35
Messaging
Types of Messages 35
Messaging Key 110
Missed Call
Organizer 77
Calculator 89
Timer 90
P
Icons 15
Phone Settings 106
Photos
Picture ID 66, 68, 69
Picture Messages 38
Profile
Normal 22
Vibration 22
R
Reducing Exposure
Accessories 124
Responsible Listening 134
Restricting Children's Access to Your
S
cling 129
Settings 99
Bluetooth 112
Phone 106
Sound 99
Time and Date 112
Shortcut Key 109
Shortcuts 29
SIM card
Installing 5
Smart Practices While Driving 127
Snapfish 114
Viewing 21
Multi-Party Call 26
Setting up 26
Mute 24
My Album 67, 98
My Folders 46
Creating 46
My Number 59
N
Number mode 30
Numeric 30
O
Operating Environment 135
Options
During a Call 23
Making a New call while in a call 24
Putting a Call on Hold 24
150
Soft Keys 22
Settings 86
Tips for Using 84
W
Wallpaper 69
web2go 61
History 63
Home 61
Navigating 61
Saved pages 63
U
Understanding Your Phone 11
Features of Your Phone 11
V
Sound Settings
Vibration Mode 100
Speakerphone 25
Specific Absorption Rate (SAR) Certifi-
Speed Dial
Setting Up Entries 57
Standard Limited Warranty
140
Stopwatch 91
Visual Voicemail
Storing a Number
phone’s memory 52
Symbol mode 30
T
T9 mode 30
Take and Send 92
Task List 88
Text Input Mode
Changing 30
Text Messages 36
Timer 90
Accessing 10
Setting Up 10
Audio Modes 87
Checking Phone Status 85
Configuring Settings 86
Confirmation 86
Travel Charger 8
Making a Voice Call 84
Opening Menus 85
151
|