Samsung SGH P300 User Manual

Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.: GH68-08601A

English. 02/2006. Rev. 1.0

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Important

safety

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 83.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

•

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates that you can get more information on

the referenced page.

ꢀ

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

•

Bluetooth

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

Indicates a key on the phone. For example,

[

]

[

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

< >

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

E-mail

Send and receive e-mails with image, video,

and audio attachments.

•

Java

Name card

Enjoy Java™-based embedded

games and download new games.

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

Web browser

Voice recorder

Access the wireless web to get

current information and up-to-the-

minute a wide variety of media

content.

Record memos or sounds.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, image, video, and audio.

Play MP3s.............................................................. 16

Browse the web...................................................... 17

Use Phonebook ...................................................... 18

Send messages...................................................... 19

View messages....................................................... 21

Use Bluetooth ........................................................ 22

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

AB, T9, Number, and Symbol mode

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

Use the leather case................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, MP3 player, web, and other special

features

Index

Use camera............................................................ 15

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p.29

3 Applications

ꢀ

p.35

5 Messages

ꢀ

p.45

8 Camera

9 Settings

ꢀ

p.64

p.69

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp.29

ꢀp.30

ꢀp.31

1 Java world

2 MP3 player

3 Voice recorder

4 World time

5 Alarm

6 PIM sync

7 Calculator

8 Converter

9 Timer

ꢀp.35

ꢀp.36

ꢀp.38

ꢀp.39

ꢀp.40

ꢀp.41

ꢀp.42

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀp.45

ꢀp.47

ꢀp.52

ꢀp.57

ꢀ

1 Time & Date

ꢀp.69

ꢀp.70

ꢀp.71

ꢀp.72

ꢀp.73

ꢀp.76

ꢀp.78

ꢀp.79

ꢀp.81

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Connection settings

9 Reset settings

6 Call time

6 Memory status

7 Call cost^*

6 File manager

ꢀp.57

2 Phonebook

ꢀp.31

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀp.57

ꢀp.58

ꢀp.59

ꢀp.60

0 Stopwatch

1 Contact list

2 Add new contact

3 Group

ꢀp.31

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

SIM AT^*

4 Browser

ꢀp.43

4 Speed dial

5 My namecard

6 Own number

7 Management

8 Service number^*

1 Home

2 Bookmarks

3 http://

4 WAP profile

5 Clear cache

ꢀp.43

ꢀp.44

* Shows only if supported by your

SIM card.

7 Calendar

ꢀp.60

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Camera

lens

Phone

Travel adapter

Navigation keys

(Up/Down/Left/

Right)

Flash

Headset

jack

Display

Left soft key

Volume keys

Web access/

Confirm key

Right soft key

Correct key

Power on/off/

Menu exit key

Camera

key

Leather case

Battery

User’s guide

MP3 key

Dial key

Special

function keys

You can obtain various accessories from

your local Samsung dealer.

Alphanumeric

keys

Microphone

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Get started

Install the battery.

Replace the cover.

First steps to operating your phone

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Lock the cover.

Plug the travel adapter

into the phone.

Remove the battery

cover.

Insert the SIM card.

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

Plug the adapter into a standard AC wall outlet.

If the phone is already on,

first turn it off by holding

[

Get started

Power on or off

When the phone is completely charged (the battery

icon becomes still), unplug the adapter from the

power outlet.

Switch on

1. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

Remove the adapter from the phone.

2. If necessary, enter the PIN and

use is prohibited.

press <OK>.

Press and hold [

Switch off

Low battery indicator

Keypad lock

When the battery is low:

You can lock the keypad to prevent accidental key

presses from affecting phone operations.

•

a warning tone sounds,

the low battery message displays, and

In Idle mode, press and hold [ ]. To unlock the

keypad, press the left soft key and then [ ].

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

You can also set the length of time that elapses before

the keypad locks automatically.

ꢀp. 70

Keys and display

Keys

In Idle mode, press and hold to access the

MP3 player menu.

Perform the function indicated on the bottom

line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

In Idle mode, access your favourite menus

your voicemail server. Press and hold [

0] to

directly.

ꢀp. 70

enter an international call prefix.

In Menu mode, scroll through menu options.

Enter special characters.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

[

] to enter a pause between numbers.

Delete characters from the display.

Adjust the phone volume.

In Idle mode, adjust the keypad tone

volume.

Make or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, press and hold to turn on the

camera.

In Camera mode, take a photo or record a

video.

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Get started

Display

Call diverting feature active

Home Zone, if registered for the

appropriate service

Layout

Icons

display various icons.

Office Zone, if registered for the

appropriate service

Text and graphics

display messages,

instructions, and

Bluetooth feature active

information you enter.

Connected to hand-free kit or

headset

Soft key function

indicators

show the current functions

assigned to the soft keys.

Synchronised with PC

Alarm set

Contacts

Call ringer set to vibrate

Quiet mode (Vibration)

Quiet mode (Mute)

Mute mode, during a call

Battery power level

Icons^*

Received signal strength

Call in progress

Out of your service area; you

cannot make or receive a call

GPRS network

Roaming network

New message

New e-mail

* Depending on your country or service provider, the

icons shown on the display may vary.

New voicemail

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select>, <OK>, or

[

] to confirm the function

Select

Back

displayed or option highlighted.

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

Press the right soft

key to return to the

previous menu level.

Press the left soft

key to select the

highlighted option.

•

Press [

mode.

] to return to Idle

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Customise your phone

You can set wallpaper for the idle

screen on the display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

Wallpaper image

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

2. Select an image category.

3. Select an image.

4. Press <Select>.

5. Press <Save>.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

→

Incoming call

→

2. Select an sound category.

3. Select an sound.

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

4. Press <Save>.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

You can set the Navigation keys as

shortcuts to access your favourite

menus.

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

shortcuts

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

→

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

3. Select a menu to be assigned to

the key.

00000000, and press <OK>.

3. Enter a new 4- to 8-digit

You can switch the phone to Quiet

mode to avoid disturbing other

people.

Quiet mode

password and press <OK>.

4. Enter the new password again

and press <OK>.

Press and hold [ ] in Idle mode.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Get started

Make/Answer calls

Use the leather case

The portable leather case, specially designed for your

phone, has an internal battery so that you don’t need

to carry an extra battery. When you charge the phone

with the leather case, you can charge both batteries at

once.

1. In Idle mode, enter an area

Make a call

code and phone number.

2. Press [ ].

3. To end the call, press [

• The leather case’s battery may be bent or damaged

by careless handling of the case. Be especially careful

not to sit down with the leather case on a back

pocket.

• Always keep the leather case dry. Humidity may

deform it's original shape.

1. When the phone is ringing,

press [ ].

Answer a call

2. To end the call, press [

Press [ ].

Slide the phone down into place.

The lock will fasten automatically.

Insert the

phone

Adjust the

volume during

a call

Step outside the phone

Begin with your camera, MP3 player, web, and other

special features

Push the lock on both slide and the

slide the phone up.

Remove the

phone

Use camera

1. In Idle mode, press and hold

to turn on the camera.

Take a photo

[

]

2. Adjust the image to be

captured.

3. Press [ ] to take a photo. The

photo is saved automatically.

4. Press <Preview> to take

another photo.

1. In Idle mode, press <Menu

and select File manager

Images Photos

2. Select the photo you want.

→

View a photo

→

Step outside the phone

Play MP3s

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

Use these methods:

Copy MP3 files

to the phone

2. Press [1] to switch to Record

•

Download from the wireless

web p. 43

mode.

ꢀ

3. Press [ ] to start recording.

•

Download from a computer

4. Press [ ] to stop recording.

The video is saved

using the optional Samsung PC

StudioꢀSamsung PC Studio

automatically.

User’s Guide

5. Press <Preview> to record

•

Receive via Bluetoothꢀp. 76

another video.

1. In Idle mode, press and hold

2. Press <Options> and select

Add to playlist Add all or

Add files

3. For Add files, press [

Create a play

list

1. In Idle mode, press <Menu

and select File manager

Videos Video clips

2. Select the video you want.

→

[

Play a video

→

] to

select the files you want and

press <Select>.

4. Press <Back> to return to the

MP3 player screen.

Browse the web

1. From the MP3 player screen,

press [ ].

Play MP3 file

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

2. During playback, use the

following keys:

•

Up: pauses or resumes

playback.

In Idle mode, press [

Launch the

web browser

•

Left: moves back to the

previous file.

•

Right: skips to the next file.

: adjusts the volume.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

browser

Down: stops playback.

To select an item, press

<Options> and select Select.

To return to the previous page,

press <Options> and select

Back

•

To access browser options,

press <Menu>.

Step outside the phone

Use Phonebook

To the SIM card:

To the phone’s memory:

1. In Idle mode, enter a phone

Add an entry

number and press <Options>.

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save contact

→

SIM.

2. Select Save contact

a number type.

→

Phone

3. Enter a name.

→

4. Press <Save> to save the

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

entry.

1. In Idle mode, press

Find an entry

Contacts>.

2. Select an entry.

3. Scroll to a number and press

to dial, or press [ ] to

edit contact information.

4. Press <Save> to save the

entry.

[

]

Send messages

1. In Idle mode, press <Menu

and select Phonebook My

namecard

Create and

send a name

card

→

1. In Idle mode, press <Menu

Send a text

and select Messages

message

2. Enter the message text.

3. Press <Options> and select

→

Create

Text message.

message (SMS)

2. Specify your contact

information.

→

3. Press <Save> to save the

name card.

Save and send or Send only

4. To send the name card to other

4. Enter destination numbers.

people, press <Options> and

5. Press [

message.

] to send the

select Send

→

a sending

method.

1. In Idle mode, press <Menu

and select Messages Create

Multimedia

Send a

→

multimedia

message

(MMS)

message

→

2. Select Subject

3. Enter the message subject and

press [ ].

Step outside the phone

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

and select Messages Create

message Email

2. Select Subject

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

Send an e-mail

Send a

→

multimedia

message

(MMS)

→

5. For Image and video, select

Add image or Add video and

add an image or a video clip.

(continued)

For Sound, select Add sound

and add a sound clip.

6. Select Message

7. Enter the message text and

press [ ].

8. Press <Options> and select

Send

[

7. Add image, video, sound,

music files, or document files.

9. Enter destination numbers or

addresses.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

10.Press [

message.

] to send the

View messages

From the Inbox:

1. In Idle mode, press <Menu

When a notification appears:

View a text

message

and select Messages

messages Inbox

→

1. Press <View>.

→

2. Select a message from the

Inbox.

2. Select the MMS message (

From the Inbox:

1. In Idle mode, press <Menu

View an e-mail

1. In Idle mode, press <Menu

and select Messages

messages Email box

2. Select an account.

→

and select Messages

messages Inbox

→

2. Select an SMS message ( ).

3. Press <Yes> to download new

e-mails or headers.

When a notification appears:

1. Press <View>.

View a

multimedia

message

4. Select an e-mail or a header.

5. If you selected a header, press

2. Press <Options> and select

Options> and select

Retrieve

3. Select the message from the

Inbox.

Step outside the phone

Use Bluetooth

1. Access an application,

Phonebook File manager, or

Calendar

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

2. Scroll to an item.

3. Press <Options> and select

Send (via)

→

Bluetooth.

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

→

4. Select a device.

→

5. If necessary, enter the

Bluetooth PIN and press <OK>.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

→

Search for new devices

2. Select a device.

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using AB mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

AB, T9, Number, and Symbol mode

You can enter text for some features, such as

messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Keys

Upper case

Lower case

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press and hold [ ] to switch between T9 (

and AB ( ) modes. Depending on your

)

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

(

) mode.

Press and hold [ ] to switch to Symbol mode.

(Creating an SMS message with uni-code encoding)

Enter text

2. Enter the whole word before editing or deleting

characters.

Tips for using AB mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Entering a word in T9 mode

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

Call functions

Advanced calling features

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using AB mode and press

<OK>.

Using Number mode

Number mode enables you to enter numbers.

2. Press [

• Press [

] to clear the whole display. You can move the

C] to clear the last digit or press and hold

Press the keys corresponding to the digits you want.

cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between

numbers.

Using Symbol mode

Symbol mode enables you to insert symbols.

Making an international call

1. In Idle mode, press and hold [

appears.

Press

0]. The

character

display more symbols

select a symbol

[Up] or [Down].

2. Enter the country code, area code, and phone

number, then press [ ].

the corresponding

number key.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

clear the entered symbols

insert the symbols

[

OK>.

Call functions

2. Scroll to the number you want and press [ ].

Answering a call

Making a call from Phonebook

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Press <Accept> or [ ] to answer the call.

Phonebook.ꢀp. 31

Tips for answering a call

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

•

When Anykey answer is active, you can press

any key, except for <Reject> or [ ]. p. 71

Press <Reject> or [ ] to reject a call.

Press and hold [ ] to reject a call or mute the

ringer, depending on the Volume key

setting. p. 70

ꢀ

keys.ꢀp. 33

•

You can quickly dial a number from the SIM card using

its location number assigned when stored.

1. In Idle mode, enter a location number and press

ꢀ

[

2. Press [Left] or [Right] to scroll through other

numbers.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

3. Press <Dial> or [ ] to dial the number you want.

1. Press <View>.

Ending a call

2. If necessary, scroll through the missed calls.

Press [

3. Press [

] to dial the number you want.

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Connect the headset to the jack on the right side of

the phone. The button on the headset works as listed

below:

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

and hold the button.

the button.

4. Press <Options> and select End held call to end

the call on hold.

5. To end the current call, press [

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

Options during a call

You can access a number of functions during a call.

activated the call waiting feature.

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <Swap> to switch between the calls.

ꢀp. 74

Adjusting the volume during a call

Use [

] to adjust the earpiece volume during a call.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Call functions

3. Press <Options> and select End held call to end

•

Mute keys/Send keys: switch the key tones on

or off.

the call on hold.

4. To end the current call, press [

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Using the Speakerphone feature

Use your phone as a speaker phone to talk and listen

with the phone a short distance away.

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Press [

] to activate the Speakerphone feature.

Press the key again to switch back to the earpiece.

Using In-call options

Press <Options> to access the following options

during a call:

•

Phonebook: access the contact list.

•

Speaker on/Normal: turn on the Speakerphone

feature or switch back to Normal mode.

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

•

Menu: access the phone's menu functions.

Mute/Unmute: switch off the phone's microphone

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

so that the other person on the phone cannot hear

you, or switch it back on.

•

End held call: disconnect the call currently on

hold.

Menu functions

All menu options listed

Select one: select one of the following options

during a multi-party call:

Private: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return to the multi-

party call.

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls, if your SIM card supports.

Remove: disconnect one multi-party call

participant.

To access this menu, press <Menu> in Idle mode and

select Call records

Current contacts (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call record

1. Press [Left] or [Right] to move to another call

type.

2. Press [Up] or [Down] to scroll through the call list.

Menu functions

3. Press [

] to view the details of a call, or [ ] to

Received calls (Menu 1.4)

dial a number.

This menu displays the most recent calls you have

received.

Using call record options

While viewing the call details, press <Options> to

access the following options:

Delete all (Menu 1.5)

Use this menu to delete all of the records in each call

type.

•

Paste: edit the number to dial or save in

Phonebook.

1. Press [

] to select the call types to be cleared.

•

Save contact: save the number to Phonebook.

2. Press <Delete>.

Send message: send an SMS or MMS message to

the selected number.

3. Press <Yes> to confirm the deletion.

•

Delete: delete the selected call record or all

records.

Call time (Menu 1.6)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Missed calls (Menu 1.2)

This menu displays the most recent calls you did not

answer.

•

Last call time: check the length of your last call.

Total sent: check the total length of all the calls

you have dialled.

Dialled calls (Menu 1.3)

This menu displays the most recent calls you have

dialled.

•

Total received: check the total length of all the

calls you have received.

To reset the call timers, press <Reset>. You need to

enter the phone password.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

The password is preset to 00000000. You can

change this password.ꢀp. 79

Phonebook (Menu 2)

Call cost (Menu 1.7)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

To access this menu, press <Menu> in Idle mode and

select Phonebook

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

•

Max cost: check the maximum cost limit set in

Set max cost

•

Reset counters: reset the cost counters.

2. Select the name from the list.

Set max cost: set the maximum cost authorised

for your calls.

3. Scroll to a number and press [ ] to dial, or press

[

] edit contact information.

Menu functions

•

Mobile

number in any category.

/Home/Office/Fax/Other: add a

Using Phonebook options

While viewing the contact details, press <Options> to

access the following options:

•

Email: assign an e-mail address.

Caller ID: assign an image to alert you to a

call from the person.

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the number to a caller group.

Memo: add a memo about the person.

•

Edit: edit contact information.

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Copy to: copy the contact to the phone’s memory

or the SIM card.

3. Press <Save> to save the contact.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Storing a number on the SIM card

1. Select SIM

Delete: delete the selected contact.

2. Enter information about the contact.

Add new contact (Menu 2.2)

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Use this menu to add a new contact to Phonebook.

Storing a number in the phone’s memory

1. Select Phone

If you assign a caller ID image, ringtone, or

group, the contact must be saved to the phone’s

memory.

2. Change the settings or enter information about the

contact.

•

First name/Last name: assign a name.

3. Press <Save> to save the contact.

•

View: display the members of the selected group.

Add: add a new group.

Group (Menu 2.3)

Use this menu to organise your contacts in caller

groups.

Edit: change the group properties.

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

Creating a new caller group

1. Press <Options> and select Add

•

Delete: delete the selected group or all groups.

Group members, however, are not deleted from

Phonebook.

2. Enter a name for the group.

3. Select the caller ID line and set an image.

4. Select the ringtone line and set a melody.

5. Press <Save> to save the group.

Speed dial (Menu 2.4)

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Adding members to a caller group

1. Select a group.

Assigning speed dial numbers

2. Press <Add>.

1. Select a key location from

for your voicemail server.

9. Key

is reserved

3. Press [

] to select the contacts to be added.

4. Press <Select>.

2. Select a contact from the contact list.

Managing caller groups

3. Select a number, if the contact has more than one

number.

While viewing the group list, press <Options> to

access the following options:

Menu functions

Managing speed dial entries

Using name card options

From the Speed dial screen, press <Options> to

access the following options:

After saving your name card, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

•

Edit: edit the name card.

View: check the name and number assigned to a

key.

Send: send the name card via SMS, MMS, e-mail,

or Bluetooth.

•

Change: assign a different number to a key.

•

Exchange contact details: exchange name cards

with another person via Bluetooth.

Remove: clear the speed dial setting for a key.

Delete: delete the name card.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Own number (Menu 2.6)

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

My namecard (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.ꢀp. 32

Management (Menu 2.7)

Applications (Menu 3)

Use this menu to manage Phonebook.

Use this menu to play Java games, play MP3 music

files, or to use convenient features, such as voice

recorder, alarm clock, calculator, converter, and

stopwatch. You can also synchronise Phonebook or

calendar data in the phone’s memory with a computer.

•

Saving location: select a default memory location

to save contacts. If you select Ask on saving, the

phone will ask you to select a memory location

when saving a number.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory, or vice

versa.

To access this menu, press <Menu> in Idle mode and

select Applications

Java world (Menu 3.1)

•

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

Use this menu to access the embedded Java games

and downloaded Java applications.

Memory status: check the number of contacts

you have stored in Phonebook.

Using Java application options

From the Java world screen, select Downloads and

press <Options> to access the following options:

Service number (Menu 2.8)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and directory enquiries.

This menu is available if your SIM card supports SDN.

•

Launch: launch the selected application.

Delete: delete the selected application or all

applications, except for the embedded ones.

•

Properties: access the application properties.

1. Scroll to the number you want and press <View>.

2. Press <Dial> or [ ].

Menu functions

•

Upgrade: upgrade the application to the latest

version.

MP3 player (Menu 3.2)

Use this menu to enjoy music. First, you need to save

MP3 files into your phone’s memory.

•

Protection: protect the application from being

deleted.

Downloading or receiving music files

Send information: send the URL containing the

application via SMS.

Use these methods to save MP3 files to your phone’s

memory:

Accessing Java settings

•

Download from the wireless web

ꢀp. 43

You can select a connection profile for accessing Java

services.

Download from a computer using the optional

Samsung PC Studio

ꢀ

Samsung PC Studio User’s

From the Java world menu, select Settings and then

a profile.

Guide

•

Via an active Bluetooth connectionꢀp. 78

You can edit a profile using the Connection

The downloaded or received files are stored in the

Music folder. p. 59

settings menu.ꢀp. 79

ꢀ

Checking memory status

Creating a play list

You can view the amount of total memory for the Java

applications as well as the amount of available and

used memory. You can also view the number of

downloaded games.

1. From the MP3 player screen, press <Options

and select Add to playlist

2. For Add files, press [ ] to select the files to be

added and press <Select>.

3. Press <Back> to return to the MP3 player screen.

→

Add all or Add files.

From the Java world menu, select Memory status

Playing music files

1. From the MP3 player screen, press <Options

Keys

Function

Turns Shuffle mode on or off.

and select Play

2. Select Phone to use the phone speaker.

Using MP3 player options

Select A/V headset to use a Bluetooth headset

and then search for and connect to the headset.

From the MP3 player screen, press <Options> to

access the following options:

During playback, use the following keys:

•

Play /Pause: begin or pause playback.

Keys

Left

Right

Down

Function

Open playlist: access the current play list.

Go to music: access the Music folder.

Pauses or resumes playback.

Moves back to the previous file.

Skips to the next file.

Send via: send the current file via e-mail or

Bluetooth.

•

Set as: set the file as your ringtone or as a caller

alert melody for a Phonebook entry.

Stops playback.

Remove from playlist: remove the selected file

from the play list.

Adjusts the volume level.

Turns the 3D sound on or off.

Changes the skin type.

Changes the repeat mode

Changes the equalizer mode

Settings: change the default settings for playing

music files.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music at

random.

Equalizer: select an equalizer setting.

Menu functions

3D sound: turn the 3D sound on or off.

Skin: select a skin type.

Recording a voice memo

1. Press [Up] to start recording.

2. Speak into the microphone.

Volume: select a volume level.

•

Properties: access the file properties.

Press [Up] to pause or resume the recording.

3. Press <Stop> or [Down] to end recording. The

Accessing the play list

voice memo is saved automatically.

From the MP3 player screen, press <Options> and

4. Press [Up] to review the voice memo.

select Open playlist

Playing a voice memo

Press <Options> to access the following options:

1. From the Voice recorder screen, press <Options

•

Play: play the currently selected file.

and select Go to voice recorder files

Add to playlist: add files to the play list.

2. Select a voice memo.

Change order: move the selected file to the

position you want within the play list.

During playback, use the following keys:

•

Remove: remove the selected file or all files from

the play list.

Keys

Function

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Properties: access the file properties.

Left

Right

Voice recorder (Menu 3.3)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

2. Press [Left] or [Right] to scroll to the city you

want. As the time line moves, the time and date of

the given zone display.

Keys

Function

Down

Stops playback.

3. Press [

] to save the city as your local time zone.

Changing the recording mode

Applying daylight savings time

1. From the world map, press <Options> and select

You can change the recording mode of the voice

recorder. Depending on this setting, the maximum

recording time is determined. Before recording a

memo, press <Options> and select Settings

recording mode:

Set daylight saving time

2. Press [ ] to select the time zones you want.

→

3. Press <Save>.

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

Alarm (Menu 3.5)

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound setting.

Limit for email: record a voice memo for adding

to an e-mail.

Maximum 1 hour: record a voice memo for up to

one hour.

Setting an alarm

1. Select the type of alarm.

World time (Menu 3.4)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

2. Set each alarm option.

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

Viewing world time

1. From the world map, press [Down].

Menu functions

•

AM/PM: select AM or PM in 12-hour format.

Repeat: select a repeat unit.

Alarm tone: select an alarm tone.

Creating a synchronisation profile

1. Press <Add>.

2. Specify the following information for the profile:

3. Press <Save>.

•

Profile name: enter the profile name.

Sync category: select the applications you

want to synchronise.

Sync type: select a synchronisation type.

Sync protocol: select a connection method.

Stopping an alarm

•

For a non-wake-up alarm, press any key.

•

For a wake-up call alarm, press <Confirm> or

[

3. Press <Save> to save the profile.

Press any key, except <Confirm> and [

], and

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Starting synchronisation

1. Make sure that your PC has MS Outlook and the

WideSync program installed, and the phone and

the PC are connected by a USB cable or an active

Bluetooth connection.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select Auto power

→

On.

2. Open MS Outlook.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

3. From the PIM sync screen, select a profile.

4. Press [

PIM sync (Menu 3.6)

Use this menu to synchronise personal data with

corresponding PC applications via the optional

WideSync program.

•

Press

[

] or [

]

to move the cursor.

Using synchronisation options

2. Press one of the Navigation keys to access the

math function you want.

From the PIM sync screen, press <Options> to access

the following options:

3. Enter the second number.

•

Start sync: start a synchronisation for the

selected profile.

4. Press [

] to view the result.

•

View result: show the result of the last

synchronisation.

5. If necessary, repeat from step 2 to continue the

calculation.

•

New sync profile: add a new profile.

Converter (Menu 3.8)

Edit sync profile: change the properties of the

profile.

Use this menu for common conversions, such as

currency and temperature.

•

Delete: delete the selected profile or all profiles.

1. Select a converter.

Calculator (Menu 3.7)

2. Press [Left] or [Right] to select the original unit

and press [Down].

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

3. Enter the value to be converted and press [Down].

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

1. Enter the first number.

•

Press the <.()> to insert a decimal point or

bracket.

Menu functions

4. Press [Left] or [Right] to select the unit you want

to convert to.

Stopwatch (Menu 3.0)

Use this menu to measure elapsed time. The

maximum time is 10 hours.

The equivalent value for the amount you entered

displays.

1. Press [

] to start the stopwatch.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

2. Press [

] to check an interval. You can repeat

this step for a total of 3 intervals.

Timer (Menu 3.9)

SIM AT (Menu 3.

)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

This menu is available if you use a SIM-AT card that

supports SIM Application Tool kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Starting the timer

1. Press <Set>.

2. Enter the length of time you want to count down

and press <OK>.

3. Press [

] to start counting down.

Stopping the timer

•

Press any key when the timer rings.

Press [

] on the Timer screen to stop the timer

before it rings.

Browser (Menu 4)

Press

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

return to the previous page

Back

Options> and select

Using page options

From any web page, press <Menu> to access the

following options:

To access this menu, press <Menu> in Idle mode and

select Browser

•

Bookmarks: bookmark the current page or access

the bookmark list.

Home (Menu 4.1)

Reload: reload the current page with updated

information.

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

•

Home: return to the homepage.

provider. You can also press [

] in Idle mode.

Go to URL: enter a URL address manually.

Navigating the web browser

Show URL: display the URL address of the current

web page. You can also set the current page as the

homepage for the web browser or a bookmark.

Press

[Up] or [Down].

scroll through browser

items

•

Clear cache: clear the cache. A cache is a

temporary memory that stores recently accessed

web pages.

select a browser item

<Options> and select

Select

Inbox: access push messages in the web browser.

Menu functions

•

Show images: display images on the current

page.

•

Go to URL: access the bookmarked web page.

Edit: edit the URL address and title of the

•

Certificates: access certificate information.

bookmark.

•

Delete: delete the selected bookmark or all

bookmarks.

Exiting the web browser

Press [ ] to exit the browser.

http:// (Menu 4.3)

Bookmarks (Menu 4.2)

Use this menu to manually enter a URL address and

access the associated web page.

Use this menu to save URL addresses in order to

quickly access web pages.

WAP profile (Menu 4.4)

Adding a bookmark

1. Select an empty location.

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also add or edit

2. Enter a title for the bookmark and press [Down].

3. Enter a URL address and press <Save>.

a profile.ꢀp. 79

Clear cache (Menu 4.5)

Accessing a bookmarked page

Selecting a bookmark item launches the web browser

and accesses the associated web page.

Use this menu to clear information stored in the cache.

Using bookmark options

After saving an item, press <Options> to access the

following options:

2. Press <Options> to access the following options

Messages (Menu 5)

for creating a message:

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message, and cell broadcast

message features.

•

Insert: add a template, Phonebook entry, or

bookmark.

•

Add image/Add animation/Add melody:

attach a picture, an animated image, or a

melody.

To access this menu, press <Menu> in Idle mode and

select Messages

•

Attach: attach a name card or calendar data

as a data format attachment.

Create message (Menu 5.1)

3. When you have finished, press <Options> and

select Save and send or Send only

Use this menu to create and send SMS, MMS, or

e-mail messages.

4. Enter a destination number.

Text message (Menu 5.1.1)

To send the message to more than one recipient,

fill in additional destination fields.

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

5. Press [

] to send the message.

Multimedia message (Menu 5.1.2)

1. Enter your message.

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

1. Select the Subject line.

Menu functions

2. Enter the message subject and press [

•

Attach: attach a name card or calendar data

as a data format attachment.

3. Select the Image and video or Sound line and

Clear subject/Clear message: clear the

add an image, a video, or a sound file.

subject or text.

Remove media/Remove sound: remove an

added item.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

7. When you have finished, press <Options> and

select Send

4. Select the Message line.

8. Enter a phone number or an e-mail address.

5. Enter the message text and press [

To send the message to more than one recipient,

fill in additional destination fields.

6. Press <Options> to access the following options

for editing the message:

9. Press [

] to send the message.

•

Edit: edit the subject or text of your message.

Change image Change video Change

sound: change an added item.

Add page: add pages. Move to each page by

pressing [Left] or [Right].

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward.

Email (Menu 5.1.3)

You can create and send e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your e-mail

•

account and profile.

ꢀp. 55

•

1. Select the Subject line.

2. Enter the subject of your e-mail and press [

3. Select the Message line.

4. Enter the e-mail text and press [

•

Remove all attachments: delete all

attachments.

5. Select File attached line and select one of the

following options to add files:

7. When you have finished, press <Options> and

select Send

•

Add image/Add video/Add sound/Add

music: add media files stored in the phone’s

8. Enter an e-mail address.

memory.

To send the e-mail to more than one recipient, fill

in additional destination fields.

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

9. Press [

] to send the e-mail.

My messages (Menu 5.2)

•

Other files: add document files stored in the

Other files folder.

Attach: attach a name card or calendar data

as a data format attachment.

Use this menu to access messages you have received,

sent, or failed to send.

Inbox (Menu 5.2.1)

6. Press <Options> to access the following options

This folder stores all of the messages you have

received, except for e-mails.

to edit the e-mail:

•

Edit: edit the subject or text.

Remove subject Remove message: clear

the subject or text.

Viewing a message

The following icons may appear on the message list to

show the message type:

•

Remove attachment: delete the selected

attachment.

•

SMS

MMS

Menu functions

•

MMS notification ( : Being retrieved,

: Failed to retrieve)

Voicemail

•

Forward: forward the message to other people.

Delete: delete the message.

•

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Push message from the web servers

Configuration message, containing network

parameters from the service provider

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

CB (Cell Broadcast) message from your

service provider

Copy media: save media content from the

message to your phone’s memory.

Delivery report for your sent messages

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

• A

icon next to a message means that a message

MMS messages

/MMS notifications

is of high priority. A grey-coloured message icon

is of low priority.

•

Retrieve: retrieve the MMS message from the

MMS server.

Using message options

•

Reply via SMS: send a reply via SMS.

Reply via MMS to: send a reply via MMS.

Forward: forward the message to other people.

Delete: delete the message.

While viewing a message, press <Options> to access

the following options:

SMS messages

•

Reply: reply to the sender via SMS or MMS.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Protection: protect the message from being

deleted.

Copy media: save media content from the

message to your phone’s memory.

CB messages

•

Save: save the message to the phone’s memory.

Protection: protect the message from being

deleted.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

Properties: access the message properties.

•

Delete: delete the message.

Configuration messages

Delivery reports

•

Install: apply the configuration specified in the

message to your phone.

•

Copy entry: extract URL, e-mail addresses, or

phone numbers from the report.

Copy entry: extract the URLs, e-mail addresses,

or phone numbers from the message.

•

Delete: delete the report.

Protection: protect the report from being deleted.

Delete: delete the message.

Drafts (Menu 5.2.2)

Push messages

This folder stores messages you have saved to send at

a later time.

•

Go to URL: connect to the URL specified in the

message.

Outbox (Menu 5.2.3)

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

This folder stores messages that the phone is

attempting to send or has failed to send.

Delete: delete the message.

Menu functions

The following icons are available to show the message

status:

•

Delete: delete the message.

Protection: protect the message from being

•

Being sent

deleted.

Failed to send

•

Properties: access the message properties.

While viewing a message, press <Options> to access

the following options:

Email box (Menu 5.2.5)

This folder stores e-mails that you have received.

Viewing an e-mail

•

Send again: retry to send the message.

Forward: forward the e-mail to other people.

1. Select an e-mail account.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

2. Press <Yes> when Check for new email

displays, or press <Options> and select Check

for new email. The phone checks the e-mail

server and download new e-mails.

•

Delete: delete the message.

Protection: protect the message from being

deleted.

The following icons may appear on the list to show

the e-mail status:

•

Properties: access the message properties.

•

Retrieved from the server

Being retrieved

Failed to retrieve.

A ! icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

Sent (Menu 5.2.4)

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

•

Forward: forward the message to other people.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

3. Select an e-mail or a header.

4. Press [

] to view other pages in the e-mail.

•

Copy media: save the attached files from the

e-mail to your phone’s memory.

5. Press [ ] or [ ] to view the previous or next

e-mail.

•

Protection: protect the e-mail from being deleted.

Properties: access the e-mail properties.

Using e-mail options

While viewing the e-mail or header, press <Options

to access the following options:

My folders (Menu 5.2.6)

Use this menu to create new folders and organise your

messages.

•

Retrieve: retrieve the e-mail body from the e-mail

server.

Creating a new folder

1. Press <Yes>.

Reply: send a reply to the sender or to all of the

other recipients.

2. Enter a folder name and press <OK>.

Using folder options

•

Forward: forward the e-mail to other people.

Delete: delete the e-mail.

On the folder list, press <Options> to access the

following options:

Add to filtering list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

•

Open: open the selected folder.

Add folder: add a new folder.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

Rename folder: change the folder name.

Delete: delete the selected folder.

Menu functions

Templates (Menu 5.3)

Delete all (Menu 5.4)

Use this create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

Use this menu to delete messages in each message

folder all at once.

1. Press [

cleared.

] to select the message folders to be

Creating a template

1. Select an empty location.

2. Enter a message and press <OK>.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

2. Press <Delete>.

Using template options

3. Press [

] to select the check box to delete

From the template list, press <Options> to access

the following options:

protected messages, and then press <Yes>.

4. Press <Yes> to confirm the deletion.

•

Edit: edit the selected template.

Settings (Menu 5.5)

Send message: create and send a new message.

Delete: delete the selected template.

Add new: add a new template.

Use this menu to set up various options for using the

messaging service.

Text message (Menu 5.5.1)

You can configure default SMS settings.

•

Send settings: set up the options for sending

SMS messages:

Reply path: allow the recipient to reply to you

through your SMS server.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Delivery report: set the network to inform you

when your message has been delivered.

Default validity: set the length of time your

messages are stored in the SMS server.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-alphabet to

Uni-code if you enter a Unicode character. Use of

Unicode encoding will reduce the maximum

number of characters in a message to about half. If

this menu is not shown, your phone provides the

Automatic character encoding by default.

Setting name: enter a profile name.

Multimedia message (Menu 5.5.2)

You can configure default MMS settings.

•

Sending settings: set up the options for sending

MMS messages:

Delivery report: set the network to inform you

Bearer selection: select either GSM or GPRS

when a message has been delivered.

preferred, depending on your network.

Hide address: set your address to be hidden from

•

Current profile: select an SMS setting profile.

the recipient’s phone.

Profile settings: set the properties of each

profile.

Read reply: send a read-reply request along with

your messages.

Service centre: store or change the number of

Priority: set the priority level of messages.

your SMS server.

Expiry date: set the length of time messages are

Default destination: enter the default

stored in the MMS server.

destination.

Menu functions

Delivery time: set a time delay before messages

are sent.

Recep. in home network and Reception when

abroad have the following options:

Outgoing message size: select a maximum size

of attached items allowed for messages.

Automatic: the phone automatically retrieves

messages from the server.

•

Retrieve settings: set up the options for

receiving MMS messages:

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Reject unknown senders: reject messages from

unknown senders.

Allow adverts: accept advertisements.

•

Profile: select a connection profile to be used for

MMS. You can also edit a profile. p. 79

ꢀ

Allow information: accept information

messages.

Email (Menu 5.5.3)

Report allowed: set the network to inform the

sender when a message has been delivered to you.

You can configure default e-mail settings.

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Recep. in home network: determine if your

phone retrieves new messages automatically when

you are in your home service area.

•

Sending settings: set up the options for sending

e-mails:

Reception when abroad: determine if your

phone retrieves new messages automatically when

you are roaming in another network.

Delivery report: set the network to inform you

when your e-mails have been delivered.

Read reply: set an e-mail address to receive

read-reply messages from recipients.

Priority: select the priority level of e-mails.

Leave copy of messages on server: leave

copies of e-mails on the e-mail server after

retrieving.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mails.

•

Block list: specify e-mail addresses or subjects

you want to reject.

Edit name: edit the name in your signature.

Email account: set up an e-mail account and

select an account to be used.

Edit telephone number: edit the phone number

in your signature.

Current account: select an account.

Edit note: edit the tag line in your signature.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

•

Reception settings: set up the options for

receiving e-mails:

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Do not notify, use the Check for new

email option to receive new e-mails manually.

Account name: enter a name for the currently

selected account.

User name: enter a user name.

Read reply: determine whether or not the phone

sends a read-reply for incoming e-mails. If you

select Reply reminder, the phone asks you to

send a read-reply.

Email address: enter your e-mail address.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Menu functions

When the protocol type is POP3

Push message (Menu 5.5.4)

POP3 server: enter the IP address or host name

You can change the settings for receiving push

messages from the wireless web server.

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter your e-mail ID.

•

Receive: set how your phone receives push

messages.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

Password: enter the password.

APOP login: connect to the server by using the

APOP login scheme.

specific

When the protocol type is IMAP4

Broadcast (Menu 5.5.5)

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter your e-mail ID.

You can change the settings for receiving CB

messages.

•

Receive: select to receive CB messages, or not.

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

Password: enter the password.

Include attachments: select this option to

receive attachments with e-mails.

•

Language: select the preferred languages in

which CB messages display.

Email retrieval limit: set the number of

headers you will retrieve from the server.

•

Email profile: select a connection profile to be

used for e-mail services. You can also add or edit a

profile.

ꢀp. 79

Viewing a slide show

Memory status (Menu 5.6)

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

Use this menu to view the amount of memory

currently in use in each message folder.

1. Select Photos

2. Press <Options> and select Slide show

File manager (Menu 6)

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

3. Select an interval option.

The slide show begins.

4. Press <Stop> to stop the slide show.

Using image options

To access this menu, press <Menu> in Idle mode and

select File manager

While viewing an image, press <Options> to access

the following options:

According to the DRM (Digital Rights Management)

system, web content may not be able to be

•

Full screen view: change the display to Full

screen view.

forwarded. The content is indicated by the

icon.

•

List: return to the image list.

Images (Menu 6.1)

Send via: send the file via MMS, e-mail or

Bluetooth.

This menu displays photos you have taken and images

downloaded, or received in messages.

•

Set as: set the file as wallpaper for the display or

Viewing an image

1. Select an image folder.

2. Select an image.

a caller ID image for a Phonebook entry.

•

Delete: delete the file.

Rename: change the file name.

Menu functions

•

Move to Favourite images: move the file to the

Favourite images folder.

Videos (Menu 6.2)

This menu displays video clips you have recorded,

downloaded, or received in messages.

•

Move to Photos: move the file to the Photos

folder.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Move to Downloaded images: move the file to

the Downloaded images folder.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

Share for bluetooth: share the files with other

Bluetooth devices.

•

Protection: protect the file from being deleted.

During playback, use the following keys:

Properties: access the file properties.

Keys

Function

Pauses or resumes playback.

Moves backward in a file.

Skips forward in a file.

Adjusts the volume.

Stops playback.

Left

Right

Down

Using video options

Music (Menu 6.3)

From a video screen, press <Options> to access the

following options:

This menu displays MP3 files you have downloaded.

Select a file. The MP3 player opens.

ꢀp. 37

•

List: return to the video list.

Sounds (Menu 6.4)

Send via: send the file via MMS, e-mail or

Bluetooth.

This menu displays voice memos you have recorded,

and sound files downloaded, or received in messages.

•

Set as wallpaper: set the video clip, if saved as a

3gp file, as wallpaper for the display.

Playing a sound clip

1. Select a sound folder.

•

Delete: delete the file.

Rename: change the file name.

2. Select a sound clip. For a voice memo, see Voice

Move to Favourite videos: move the file to the

Favourite videos folder.

recorder.

ꢀp. 38

Using sound options

•

Move to Video clips: move the file to the Video

clips folder.

From a sound screen, press <Options> to access the

following options:

Move to Downloaded videos: move the file to

the Downloaded videos folder.

•

List: return to the sound list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Share for bluetooth: share the files with other

Bluetooth devices.

•

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

Menu functions

•

Delete: delete the file.

•

Send via: send the file via e-mail or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the file name.

•

Rename: change the file name.

Move to Favourite sounds: move the file to the

Favourite sounds folder.

Share for bluetooth: share the files with other

•

Move to Voice recorder files: move the file to

the Voice list folder.

Bluetooth devices.

•

Protection: protect the file from being deleted.

Move to Downloaded sounds: move the file to

the Downloaded sounds folder.

Properties: access the file properties.

Memory status (Menu 6.6)

Share for bluetooth: share the files with other

Bluetooth devices.

Use this menu to view memory information for media

items in each folder. Press [Left] or [Right] to view the

memory status in size or number of items.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

Other files (Menu 6.5)

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

To access this menu, press <Menu> in Idle mode and

select Calendar

While viewing the file list, press <Options> to access

the following options:

•

Missed alarm events: view events whose alarms

you have missed.

Consulting the calendar

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Memory status: access memory information for

the event items stored on the calendar.

Selecting a day

Creating an event

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

You can store scheduled events, anniversaries,

memos, and To do items on the calendar. More than

one event per day can be stored.

Press [

] to move by month.

Entering a new scheduled event

Using calendar options

1. Scroll to a date on the calendar.

Press <Options> to access the following options:

2. Press <Options> and select Create

→

Schedule.

•

View mode: change the view mode of the

calendar. p. 63

Create: add a new event.

ꢀ

3. Enter information or change the settings:

•

ꢀnext section

•

Subject: enter the title of the event.

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

Go to: select today’s date or enter a specific date.

Sort by: sort items by the type of event.

Delete: delete the items stored on the calendar by

using various deleting options.

•

AM/PM: select AM or PM in 12-hour time

format.

You can delete recurring events in Day view only.

Menu functions

•

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

Alarm: set an alarm for the event.

Before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: set the event to recur and select a

repeat unit.

•

Occasion: enter information about the

anniversary.

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

•

Until: set the ending date, if the event will

recur.

4. Press <Save> to save the event.

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

→

Memo.

Anniversary

3. Enter information or change the settings:

2. Select an event to view its details.

Entering a To do item

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Press [Left] or [Right] to access the other events

scheduled for the selected day.

→

To do.

3. Enter information or change the settings:

Using event options

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

While viewing an event, press <Options> to access

the following options:

•

Edit: edit the event.

Select priority: select a priority level.

Create: add a new event.

4. Press <Save> to save the event.

Send via: send the event via SMS, MMS, e-mail,

or Bluetooth.

Viewing an event

•

View mode: change the view mode of the

calendar.

Once you have scheduled events, the event icons and

the number of events for a specific day appears at the

bottom of the calendar.

•

Delete: delete the event.

Memory status: access memory information for

the events stored on the calendar.

•

Scheduled event

To do item

•

Anniversary

Memo

Viewing an event in different mode

Accessing an event

1. Select a date on the calendar to display the events

for the day.

You can change the calendar display to Day view or

Week view. Press <Options> and select View mode

a view mode.

→

Menu functions

Day view

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

You can view events for the selected date. Select an

event to view its details.

The following icons may display to indicate the event

status:

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

•

Alarm set

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

Recurring event

To do item’s priority (Red: high, Blue: normal,

Grey: low)

•

Completed, to do item

Week view

Taking a photo

You can view events for the selected week. A cell on

the timetable indicates the presence of a schedule

item. Select a cell in the day you want.

You can take photos in various modes. The camera

produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

1. Access the Camera menu or press and hold [

]

to turn on the camera.

2. Adjust the image to be captured.

Single shot: take a photo in normal mode. You

can select whether or not the camera automatically

saves a photo.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

ꢀ

Multi shot: take a series of action stills. You can

select the number of photos the camera will take

and shooting speed.

•

or switch to other modes.

in Capture mode

ꢀUsing the keypad

Mosaic shot: take several stills and save them in

one frame. You can select the layout and save

mode.

3. Press [

]

to take a photo. The photo is saved in

the Photos folder.

4. To

Press

Options>.ꢀp. 66

•

Effects: change the colour tone or apply a special

effect.

access photo options

delete the photo

•

Frames: apply a decorative frame.

[C] and then <Yes>.

Flash: determine the use of the flash.

return to Capture mode

<Preview>.

Timer: set a time delay before the camera takes a

photo.

Using camera options in Capture mode

•

Go to photos: access the Photos folder.

In Capture mode, press < > to access the following

options:

Settings: change the default settings for taking a

photo.

•

Record video: switch to Record mode.

Size: select an image size.

Shooting mode: take a photo in the following

modes:

Quality: select an image quality setting.

Menu functions

Viewfinder mode: select a preview screen.

Key

Function

Shutter sound: select the sound that you hear

Changes the shooting mode.

when you press the shutter release, [

•

Shortcuts: view the functions of the keys you can

use in Capture mode.

Changes the colour tone or applies a

special effect.

Using the keypad in Capture mode

Reduces the distortion on the image to

maximise detail and sharpness.

You can use the keypad to customise your camera

settings in Capture mode.

Selects a decorative frame.

Sets the timer.

Key

Function

Flips the image vertically.

Shows the mirror image.

Adjusts the image brightness.

Zooms in or out.

Goes to the Photos folder.

Changes the preview screen.

Determines the use of the flash.

Left/Right

Up/Down

Using photo options

Switches to Record mode.

ꢀp. 67

After saving a photo, press <Options> to access the

following options:

Changes the image size.

•

View: access one of the multi-shot photos.

Changes the image quality.

Take another: return to Capture mode.

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

3. Press [

4. Press [

]

to start recording.

or < > to stop recording. The video is

Set as: set the photo as wallpaper for the display

or a caller ID image for a Phonebook entry.

automatically saved in the Video clips folder.

5. To Press

•

Delete: delete the file.

play back the video clip

access video options

delete the video clip

return to Record mode

[

Rename: change the file name.

Go to photos: access the Photos folder.

ꢀp. 57

Options>.ꢀp. 69

] and then <Yes>.

Preview>.

Protection: protect the file from being deleted.

Properties: access the file properties.

Recording a video

Using camera options in Record mode

You can record a video of what is displayed on the

camera screen and save it.

In Record mode, press < > to access the following

options:

1. In Capture mode, press [

1].

2. Adjust the image to be captured.

•

Take photo: switch to Capture mode.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

Effects: change the colour tone or apply a special

effect.

ꢀ

•

Flash: determine the use of the flash.

or switch to other modes.

in Record mode

ꢀUsing the keypad

Timer: set a time delay before the camera starts

recording.

Menu functions

•

Go to videos: access the Video clips folder.

Keys

Function

•

Settings: change the following settings for

Flips the image vertically.

Shows the mirror image.

Adjusts the image brightness.

Zooms in or out.

recording a video:

Recording mode: select a video recording mode.

Select Limit for MMS/Wallpaper to record a

video suitable for messaging or for setting as

wallpaper. The video clip is saved in 3GP format.

Left/Right

Up/Down

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

Switches to Capture mode.

ꢀp. 64

Changes the frame size.

Size: select a frame size.

Changes the image quality.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Audio record: record audio with a video clip.

Changes the video recording mode.

Changes the colour tone or applies a

special effect.

•

Shortcuts: view the functions of the keys you can

use in Record mode.

Reduces the distortion on the image to

maximise detail and sharpness.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Mutes or unmutes the audio.

•

Protection: protect the file from being deleted.

Keys

Function

Properties: access the file properties.

Sets the timer.

Goes to the Video clips folder.

Changes the preview screen.

Determines the use of the flash.

Settings (Menu 9)

The Settings menu provides you with various setting

options to customise the phone as your preferences

and needs. You can also reset the settings to their

default values.

Using video options

To access this menu, press <Menu> in Idle mode and

select Settings

After saving a video clip, press <Options> to access

the following options:

•

Record another: return to Record mode.

Time & Date (Menu 9.1)

Send via: send the file via MMS, e-mail, or

Bluetooth.

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

•

Set as wallpaper: set the video clip, if saved as a

3GP file, as wallpaper for the display.

ꢀp. 39

•

Delete: delete the file.

•

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Rename: change the file name.

•

Go to videos: access the Video clips folder.

•

ꢀp. 58

Menu functions

•

Set date: enter the current date.

Assigning a shortcut menu

•

Starting day of calendar: set which day of the

week the calendar starts with.

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

Using shortcut options

Phone settings (Menu 9.2)

Press <Options> to access the following options:

Many different features of your phone’s system can be

customised to suit your preferences.

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

Language (Menu 9.2.1)

Use this menu to select one of several languages for

the display text.

•

Remove all: deactivate all shortcut assignments.

Auto keypad lock (Menu 9.2.4)

Greeting message (Menu 9.2.2)

Use this menu to set the length of time that elapses

before the keypad locks automatically.

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Volume key (Menu 9.2.5)

Short cut (Menu 9.2.3)

Use this menu to set whether the phone mutes the call

ringer or reject a call if you press and hold [

when a call comes in.

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

]

•

Text colour: select a font colour.

Extra settings (Menu 9.2.6)

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in message.

You can turn the automatic redialling or answering

feature on or off.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Skin (Menu 9.3.2)

•

Anykey answer: answer an incoming call by

You can select a skin colour pattern for Menu mode.

pressing any key, except <Reject> and [

LCD brightness (Menu 9.3.3)

Display settings (Menu 9.3)

You can adjust the brightness of the display for

varying lighting conditions.

Use this menu to change settings for the display and

light.

Back light (Menu 9.3.4)

Wallpaper (Menu 9.3.1)

You can select the length of time the backlight stays

on or the display stays in Dim mode, in which the

backlight is off.

You can set up the idle screen for the display.

•

Wallpaper image: select an image or a video clip

to be displayed on the display.

•

Main display normal: select the length of time

the backlight stays on.

Text position: select a text position. If you don’t

want to display text in Idle mode, select Off

•

Main display dim: select the length of time the

display stays in Dim mode after the backlight turns

off. After a specified time, the display turns off.

Text mode: select a font style.

Menu functions

Dialling display (Menu 9.3.5)

Keypad tone (Menu 9.4.2)

Use this menu to select a font colour for the numbers

entered while dialling.

Use this menu to select the tone that the phone

sounds when you press a key.

You can adjust the keypad tone volume using

Service light (Menu 9.3.6)

[

] in Idle mode.

The service light on the phone blinks to indicate the

service status. Use this menu to activate or deactivate

Message tone (Menu 9.4.3)

the feature of the service light.

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages individually.

Sound settings (Menu 9.4)

•

Tone: select one of several message tones.

Use this menu to customise various sound settings.

Alert type: specify how you are to be informed

that a message comes in.

Incoming call (Menu 9.4.1)

Use this menu to change the sound settings for

incoming calls.

•

Repetition: specify how often the phone informs

you of a new message.

•

Ringtone: select a ringtone to be used for the call

ringer.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Volume: select a ringer volume.

Alert type: specify how you are to be informed of

incoming calls.

Quiet mode (Menu 9.4.5)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Extra tones (Menu 9.4.6)

Call diverting (Menu 9.5.1)

Use this menu to customise additional tones for the

phone.

This network service reroutes incoming calls to a

phone number that you specify.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Connection tone: set the phone to beep when an

outgoing call is connected to the system.

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Error tone: set the phone to beep when you have

made a mistake or something wrong happens on

the phone.

•

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

Network services (Menu 9.5)

Deactivate

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

7. Press <Select>.

Menu functions

3. Select Activate. To deactivate call barring, select

Deactivate

Call barring (Menu 9.5.2)

This network service allows you to restrict your calls.

1. Select a call barring option:

4. Enter the call barring password supplied by your

service provider and press <Select>.

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country

when you are abroad, and to your home

country.

Call waiting (Menu 9.5.3)

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

•

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

2. Select Activate and press <Select>. To

deactivate call waiting, select Deactivate

Network selection (Menu 9.5.4)

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area. You can select a

network other than your home network only if there is

a valid roaming agreement between the two.

2. Select the type of calls to be barred.

Caller ID (Menu 9.5.5)

Closed user group (Menu 9.5.7)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group, contact your

service provider.

•

Index list: add, delete, or activate CUG index

numbers.

Some networks may not allow you to change this

setting.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Band selection (Menu 9.5.8)

Voice server number: enter the voicemail server

number.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

Menu functions

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

My devices: search for connectable Bluetooth

devices.

Bluetooth (Menu 9.6)

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Bluetooth services: display available Bluetooth

services.

• If there are obstacles between the devices, the

operating distance may be reduced.

• It is recommended that you don’t use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and MP3 player, or

vice versa, for better performance.

• Some devices may not be compatible with your

phone.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search for new devices

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as 0000

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

If the other device has a code, you must enter it.

Using device options

•

Mono headset/Hands-free car kit

From the device list, press <Options> to access the

following options:

Computer

•

Printer

PDA

Mobile phone

Unknown deviceo

•

Connect: connect to a headset or hands-free car

kit.

Disconnect: end the connection with the

connected device.

The colour of the icon indicates the status of the

the device:

Browse files: search for data from the device and

import data directly to your phone.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Service list: access the Bluetooth service list of

the device.

•

Rename: rename the paired device.

3. Select a device.

Authorise device/Unauthorised device:

4. Enter a Bluetooth PIN and press <OK>. This code

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

is used just once and you don’t need to memorise it.

When the owner of the other device enters the

same code, pairing is complete.

•

Delete: remove the selected device or all devices

from the list.

Menu functions

Sending data via Bluetooth

Security (Menu 9.7)

1. Activate the Bluetooth feature.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

2. Select the application in which the item you want

to send is stored.

3. Scroll to the item you want and press <Options>.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

5. Select a device.

PIN check (Menu 9.7.1)

6. If necessary, enter the Bluetooth PIN needed for

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Change PIN (Menu 9.7.2)

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

2. Press <Yes> to receive data.

Phone lock (Menu 9.7.3)

SIM lock (Menu 9.7.6)

Use this menu to lock the phone from unauthorised

use.

This menu allows your phone to work only with the

current SIM by assigning a SIM lock code. You must

enter the SIM lock code to use a different SIM card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

FDN mode (Menu 9.7.7)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change password (Menu 9.7.4)

Use this menu to change your phone password.

Change PIN2 (Menu 9.7.8)

Privacy (Menu 9.7.5)

If supported by your SIM card, use this feature to

change your current PIN2.

Use this menu to lock access to messages, files, or all

menu functions on the phone, except for call

functions.

Connection settings (Menu 9.8)

When a privacy option is enabled, you must enter the

phone password to access the locked items or

functions.

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

Menu functions

•

DNS1 and DNS2: enter the primary and

secondary DNS addresses.

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

•

Creating a profile

1. Press <New>. If a profile has already been saved,

When the bearer is set to GPRS:

press <Options> and select Add new

APN: enter the access point name.

connection

2. Specify each information:

Password: enter the login password.

•

Profile name: enter a profile name.

Homepage URL: enter the address of the

homepage of your service provider.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

When the bearer is set to GSM

Dial number: enter the PPP phone number.

•

Password: enter the login password.

Data call type: select a call type for data

transmission.

•

Port: enter the port number of the proxy

server.

DNS: activate or deactivate the DNS

addresses.

3. Press <Save> to save the profile.

Using profile options

Solve problems

Help and personal needs

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

Add new connection: add a new profile.

Reset settings (Menu 9.9)

When you switch on your phone, the

following messages may appear:

Use this menu to reset the phone’s settings you have

changed.

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

1. Press [

reset.

] to select the setting categories to be

“Enter password”

2. Press <Reset>.

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

“Enter PIN”

change this password.

ꢀp. 79

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

•

Be sure that you are accessing the correct cellular

network.

•

The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No service,” “Network failure,” or “Not

done” displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Warning Low

battery” flashes on the display

You have entered a number but it was not

dialled

•

Your battery is insufficiently charged. Recharge the

battery.

•

Be sure that you have pressed [ ].

•

Be sure you have accessed the right cellular

network.

The audio quality of the call is poor

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

Be sure that you have not set an outgoing call

barring option.

(

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your correspondent cannot reach you

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

Health and safety information

•

Use the Contacts list menu to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery doesn’t charge properly or the

phone sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to

solve the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The highest SAR value for this model phone was 0.973 W/

kg.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Pacemakers

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

Index

Characters, enter • 23

Configuration messages • 49

Connection tone • 73

Converter • 41

Creating messages

e-mail • 46

MMS • 45

SMS • 45

CUG (Closed User Group) • 75

language • 70

layout • 10

settings • 71

AB mode, text input • 23

Alarm • 39

Calculator • 41

Calendar • 60

Call cost • 31

Call records

dialled • 30

Diverting, calls • 73

DRM (Digital Rights

Management) • 57

DTMF tones, send • 28

Answering

call • 26

second call • 27

Anykey answer • 71

Auto redial • 71

missed • 30

received • 30

Call time • 30

Caller groups • 33

Caller ID • 75

Calls

answering • 26

barring • 74

diverting • 73

holding • 27

redialling • 25

rejecting • 26

transferring • 28

waiting • 74

Camera

E-mails

creating/sending • 46

deleting • 51

setting • 54

viewing • 50

Emergency calls • 87

Background image • 71

Backlight time, set • 71

Band selection • 75

Barring, calls • 74

Battery

Date, set • 70

Deleting

call records • 29

e-mail • 50, 51, 52

events • 63

charging • 7

MMS • 48, 50, 52

phonebook • 35

SMS • 48, 50, 52

Dialled calls • 30

Dialling font, set • 72

Display

low indicator • 8

precautions • 84

Bluetooth

FDN (Fixed Dialling Number)

mode • 79

File manager • 57

receiving, data • 78

sending, data • 78

settings • 76

Games • 35

Greeting message • 70

photos • 64

videos • 67

backlight, set • 71

brightness • 71

icons • 10

Broadcast messages • 49, 56

Browser, web • 43

CB (Cell Broadcast) messages •

49, 56

Low battery indicator • 8

finding • 31

managing • 35

options • 32

Health and safety • 83

Holding, call • 27

Name card • 34

Names

Memory status

downloaded items • 60

file manager • 60

messages • 57

phonebook 35

speed dialling • 33

entering • 23

Photos

searching • 31

Network band, select • 75

Network selection • 74

Network services • 73

Icons, description • 10

Images, downloaded • 57

Inbox, messages

e-mail • 50

taking • 64

viewing • 57

PIM sync

Message tone • 72

Messages

creating, profile • 40

starting • 40

PIN, change • 78

PIN2, change • 79

Power on/off tone • 72

Privacy • 79

Problems, solve • 81

Push messages • 49, 56

MMS/SMS • 47

International calls • 25

Internet • 43

cell broadcast • 49, 56

configuration • 49

e-mail • 46, 50

greeting • 70

MMS • 45, 48

push • 49, 56

Outbox, messages • 49

Password

Java applications • 35

call barring • 74

phone • 79

Phone

SMS • 45, 48

Keypad lock • 8, 70

Keypad tones

selecting • 72

sending/muting • 28

volume • 72

care and maintenance •

display • 10

icons • 10

Minute minder • 73

Missed calls • 30

MMS messages

creating/sending • 45

deleting • 48

setting • 53

viewing • 47

MP3 player • 36

Multiparty-call • 28

Music, downloaded • 59

Quiet mode

entering • 13

setting • 72

locking • 79

password • 79

resetting • 81

switching on/off • 8

unpacking • 6

Phonebook

Received calls • 30

Received messages

e-mail • 50

Language, select • 70

Last number, redial • 25

Locking

MMS/SMS • 47

menu functions • 79

phone • 79

SIM card • 79

adding • 32

deleting • 32, 35

Index

Recording

Sound settings • 72

Sounds, downloaded • 59

Speakerphone • 28

Speed dial • 33

access • 43

bookmarks • 44

World time • 39

videos • 67

voice memos • 38

Redialling

automatically • 71

manually • 25

Resetting phone • 81

Ringer

Stopwatch • 42

Switching on/off

microphone • 28

phone • 8

incoming calls • 72

messages • 72

Road safety • 85

Roaming • 74

T9 mode, text input • 24

Templates, message • 52

Text, enter • 23

Time, set • 69

Timer • 42

Safety

information • 83

precautions • 1

Security, calls • 78

Sent messages • 50

Short cut • 70

SIM card

inserting • 7

locking • 79

Skin colour • 71

SMS messages

creating/sending • 45

deleting • 48

setting • 53

Videos

playing • 58

recording • 67

Voice recorder

playing • 38

recording • 38

Voicemail server • 75

Waiting call • 74

Wallpaper • 71

Web browser

viewing • 47

Toshiba SD R5272 User Manual
Toastmaster ME8TPB User Manual
Spectra Studebaker SB2101 User Manual
Sony CDX L480X User Manual
Seagate Cheetah ST3300557SS User Manual
Samsung SGH X475 User Manual
Samsung SGH a650 User Manual
Samsung Cell Phone m220 User Manual
Philips Nike PSA[CD12 User Manual
Oregon Scientific RM383PA User Manual