Samsung SGH N625 User Manual

DUAL BAND

GSM TELEPHONE

SGH-N625

OWNER’S MANUAL

ELECTRONICS

Printed in Korea

Code No.: GH68-03011A

Eng. 07/2002. Rev.1.0

GLOBAL SYSTEMS FOR

MOBILE COMMUNICATIONS

World Wide Web

http://www.samsungmobile.com

All other repaired/replaced Product will be warranted for a

period equal to the remainder of the original Limited

Warranty on the original Product or for 90 days, whichever

is longer. All replaced parts, components, boards and

equipment shall become the property of SAMSUNG. If

SAMSUNG determines that any Product is not covered by

this Limited Warranty, Purchaser must pay all parts,

shipping, and labor charges for the repair or return of such

Product.

(b) equipment that has the serial number removed or made

illegible; (c) any plastic surfaces or other externally exposed

parts that are scratched or damaged due to normal use; (d)

malfunctions resulting from the use of Product in conjunction

with accessories, products, or ancillary/peripheral equipment

not furnished or approved by SAMSUNG; (e) defects or dam-

age from improper testing, operation, maintenance, installa-

tion, or adjustment; (f) installation, maintenance, and service

of Product, or (g) Product not purchased in the United States

or Canada. This Limited Warranty covers batteries only if

battery capacity falls below 80% of rated capacity or the bat-

tery leaks, and this Limited Warranty does not cover any bat-

tery if (i) the battery has been charged by a battery charger

not specified or approved by SAMSUNG for charging the bat-

tery, (ii) any of the seals on the battery are broken or show

evidence of tampering, or (iii) the battery has been used in

equipment other than the SAMSUNG phone for which it is

specified.

What Are the Limits On SAMSUNG's Liability?

EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY

CONTAINED HEREIN, PURCHASER TAKES THE PRODUCT

"AS IS," AND SAMSUNG MAKES NO WARRANTY OR

REPRESENTATION AND THERE ARE NO CONDITIONS,

EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF

ANY KIND WHATSOEVER WITH RESPECT TO THE PROD-

UCT, INCLUDING BUT NOT LIMITED TO:

• THE MERCHANTABILITY OF THE PRODUCT OR ITS FIT

NESS FOR ANY PARTICULAR PURPOSE OR USE;

• WARRANTIES OF TITLE OR NON-INFRINGEMENT;

• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF

THE PRODUCT;

• THE WORKMANSHIP OF THE PRODUCT OR THE COM

PONENTS CONTAINED THEREIN; OR

• COMPLIANCE OF THE PRODUCT WITH THE REQUIRE

MENTS OF ANY LAW, RULE, SPECIFICATION OR CON

TRACT PERTAINING THERETO.

What are SAMSUNG's Obligations? During the applica-

ble warranty period, SAMSUNG will repair or replace, at

SAMSUNG's sole option, without charge to Purchaser, any

defective component part of Product. To obtain service under

this Limited Warranty, Purchaser must return Product to an

authorized phone service facility in an adequate container for

shipping, accompanied by Purchaser's sales receipt or compa-

rable substitute proof of sale showing the date of purchase,

the serial number of Product and the sellers' name and

address. To obtain assistance on where to deliver the

Product, call Samsung Customer Care at 1-888-987-4357.

Upon receipt, SAMSUNG will promptly repair or replace the

defective Product. SAMSUNG may, at SAMSUNG's sole

option, use rebuilt, reconditioned, or new parts or compo-

nents when repairing any Product or replace Product with a

rebuilt, reconditioned or new Product. Repaired/replaced

leather cases, pouches and holsters will be warranted for a

period of ninety (90) days.

NOTHING CONTAINED IN THE INSTRUCTION MANUAL

SHALL BE CONSTRUED TO CREATE AN EXPRESS WAR-

RANTY OF ANY KIND WHATSOEVER WITH RESPECT TO

THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDI-

TIONS THAT MAY ARISE BY OPERATION OF LAW,

INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES

OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE, ARE HEREBY LIMITED TO THE SAME DURAION

SAMSUNG MAKES NO WARRANTIES OR REPRESENTA-

TIONS AND THERE ARE NO CONDITIONS, EXPRESS OR

IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALI-

TY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUIT-

ABILITY OF ANY THIRD-PARTY SOFTWARE OR EQUIPMENT,

WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT

IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY

SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO

INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH

THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,

PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-

PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE

PURCHASER AND THE DIRECT VENDOR, OWNER OR SUP-

PLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT,

AS THE CASE MAY BE.

This Limited Warranty allocates risk of Product failure

between Purchaser and SAMSUNG, and SAMSUNG's

Product pricing reflects this allocation of risk and the limita-

tions of liability contained in this Limited Warranty. The

agents, employees, distributors, and dealers of SAMSUNG

are not authorized to make modifications to this Limited

Warranty, or make additional warranties binding on SAM-

SUNG. Accordingly, additional statements such as dealer

advertising or presentation, whether oral or written, do not

constitute warranties by SAMSUNG and should not be

relied upon.

OF TIME AS THE EXPRESS WRITTEN WARRANTY STATED

HEREIN. SOME STATES/PROVINCES DO NOT ALLOW

LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY

LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO

YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR

ANY DAMAGES OF ANY KIND RESULTING FROM THE PUR-

CHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE

PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM

THE USE OR LOSS OF USE OF THE PRODUCT OR FROM THE

BREACH OF THE EXPRESS WARRANTY, INCLUDING INCI-

DENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAM-

AGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS,

OR FOR DAMAGES ARISING FROM ANY TORT (INCLUDING

NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMIT-

TED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR

ANY BREACH OF CONTRACT OR FOR ANY CLAIM

BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.

SOME STATES/PROVINCES DO NOT ALLOW THE EXCLU-

SION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL

DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION

MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU

SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE

OTHER RIGHTS, WHICH VARY FROM STATE TO

STATE/PROVINCE TO PROVINCE. THIS LIMITED WARRAN-

TY SHALL NOT EXTEND TO ANYONE OTHER THAN THE

ORIGINAL PURCHASER OF THIS PRODUCT AND STATES

PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF

THIS LIMITED WARRANTY IS HELD ILLEGAL OR UNEN-

FORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL

ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT

THE ENFORCEABILITY FOR THE REMAINDER OF THIS LIM-

ITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS

AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS

TERMS OR AS LIMITED AS THE LAW PERMITS.

Samsung Telecommunications America, L.P.

1130 East Arapaho Road

Richardson, Texas 75081

Phone: 1-800-SAMSUNG

Phone: 1-888-987-HELP (4357)

reserved. No reproduction in whole or in part allowed with-

out prior written approval. Specifications and availability

subject to change without notice.

THE PARTIES UNDERSTAND THAT THE PURCHASER MAY

USE THIRD-PARTY SOFTWARE OR EQUIPMENT IN CON-

JUNCTION WITH THE PRODUCT.

Contents

Safety Quick Guide. . . . . . . . . . . . . . . .

Unpacking . . . . . . . . . . . . . . . . . . . . . .

Your Phone . . . . . . . . . . . . . . . . . . . . . 10

Phone Layout. . . . . . . . . . . . . . . . . . . . . . . . . . 10

Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Service Light . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Getting Started . . . . . . . . . . . . . . . . . . 15

Installing the SIM Card and the Battery . . . 15

Charging a Battery . . . . . . . . . . . . . . . . . . . . . 18

Switching the Phone On/Off . . . . . . . . . . . . . 20

Call Functions . . . . . . . . . . . . . . . . . . . 22

Making a Call . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adjusting the Volume . . . . . . . . . . . . . . . . . . . 24

Answering or Rejecting a Call . . . . . . . . . . . 25

Viewing Missed Calls . . . . . . . . . . . . . . . . . . . 26

In-Call Options . . . . . . . . . . . . . . . . . . . . . . . . 28

Entering Text . . . . . . . . . . . . . . . . . . . 35

Changing the Text Input Mode . . . . . . . . . . . 36

Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . 36

Using the ABC Mode . . . . . . . . . . . . . . . . . . . 38

Using the Number Mode . . . . . . . . . . . . . . . . 40

Using the Symbolic Mode . . . . . . . . . . . . . . . 40

Contents(continued)

Phonebook . . . . . . . . . . . . . . . . . . . . . 41

Storing a Phone Number with a Name . . . . 41

Phonebook Options . . . . . . . . . . . . . . . . . . . . 42

Speed-Dialing by SIM Memory Location . . 45

Searching for and Dialing a Number

Voice Functions . . . . . . . . . . . . . . . . . . 66

Voice Dial (Menu 3-1). . . . . . . . . . . . . . . . . . . 66

Voice Command (Menu 3-2) . . . . . . . . . . . . . 69

Voice Memo (Menu 3-3). . . . . . . . . . . . . . . . . 69

Voice Active (Menu 3-4). . . . . . . . . . . . . . . . . 71

in the Phonebook . . . . . . . . . . . . . . . . . . . . . . 46

Dialing a Number using the Service

Directory or Information Numbers . . . . . . . 47

Tones . . . . . . . . . . . . . . . . . . . . . . . . . 72

Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . 72

Melody Composer (Menu 4-2). . . . . . . . . . . . 73

Key Volume (Menu 4-3) . . . . . . . . . . . . . . . . . 75

Alert Type (Menu 4-4). . . . . . . . . . . . . . . . . . . 76

Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . 76

Message Tone (Menu 4-6). . . . . . . . . . . . . . . 77

Error Tone (Menu 4-7). . . . . . . . . . . . . . . . . . . 77

Minute Minder (Menu 4-8). . . . . . . . . . . . . . . 78

Connect Tone (Menu 4-9). . . . . . . . . . . . . . . . 78

Selecting Functions and Options . . . . . . 48

Using the Menus . . . . . . . . . . . . . . . . . 50

Accessing Menu Functions by Scrolling . . . 50

Accessing Menu Functions by

Using Shortcuts . . . . . . . . . . . . . . . . . . . . . . . 51

Menu Structure . . . . . . . . . . . . . . . . . . . . . . . 52

Call Records . . . . . . . . . . . . . . . . . . . . 55

Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . 55

Incoming Calls (Menu 1-2). . . . . . . . . . . . . . . 55

Outgoing Calls (Menu 1-3) . . . . . . . . . . . . . . . 56

Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . . 56

Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . 57

Settings . . . . . . . . . . . . . . . . . . . . . . . 79

Phone Settings (Menu 5-1) . . . . . . . . . . . . . . 79

Network Services (Menu 5-2) . . . . . . . . . . . . 84

Security Settings (Menu 5-3). . . . . . . . . . . . . 93

LCD/LED Settings (Menu 5-4) . . . . . . . . . . . . 96

Organizer . . . . . . . . . . . . . . . . . . . . . . 98

Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . . 98

Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . 100

Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . . 102

World Time (Menu 6-4). . . . . . . . . . . . . . . . . . 104

Clock (Menu 6-5). . . . . . . . . . . . . . . . . . . . . . . 105

Messages . . . . . . . . . . . . . . . . . . . . . . 58

Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . 58

Read Messages (Menu 2-2). . . . . . . . . . . . . . 59

Write Messages (Menu 2-3) . . . . . . . . . . . . . 61

Preset Message List (Menu 2-4). . . . . . . . . . 62

Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . 62

Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . 63

Picture Messages (Menu 2-7). . . . . . . . . . . . 64

Safety Quick Guide

Contents(continued)

Games . . . . . . . . . . . . . . . . . . . . . . . . 106

Squares (Menu 7-1) . . . . . . . . . . . . . . . . . . . . 107

Fortress (Menu 7-2) . . . . . . . . . . . . . . . . . . . . 108

Ice Cave (Menu 7-3) . . . . . . . . . . . . . . . . . . . . 109

Read these guidelines before using your wireless

phone. Failure to comply with these guidelines may

be dangerous or illegal. For more detailed safety

information, see “Health and Safety Information” on

page 122.

WWW Services . . . . . . . . . . . . . . . . . . 110

Navigating with the WAP Browser. . . . . . . . 111

Entering Text, Numbers, or Symbols. . . . . . . 112

Network Connection Information . . . . . . . . . 113

Road safety comes first

Do not use a hand-held phone while driving; park the

vehicle first.

Additional Services . . . . . . . . . . . . . . . 114

Switch your phone off when refueling

Do not use the phone at a refueling point (service

station) or near fuels or chemicals.

ALS (Alternate Line Service) . . . . . . . . . . . . . 114

Solving Problems . . . . . . . . . . . . . . . . . 116

Reference Information . . . . . . . . . . . . . 119

Access Codes . . . . . . . . . . . . . . . . . . . . . . . . 119

Health and Safety Information . . . . . . . . . . . 122

Switch your phone off on aircraft

Wireless phones can cause interference. Using them

on aircraft is both illegal and dangerous.

Glossary . . . . . . . . . . . . . . . . . . . . . . 137

Index . . . . . . . . . . . . . . . . . . . . . . . . . 141

Switch your phone off in hospital

Switch off your phone near medical equipment.

Follow any regulations or rules in force.

Interference

All wireless phones may get interference which

could affect performance.

Respect special regulations

Follow any special regulations in force in any area

and always switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger (in a hospital for example).

S a f e t y Qu ic k Gu id e

Unpacking

Your package contains the following items.

Radio frequency exposure information

In August 1996, the Federal Communications

Commisision (FCC) of the U.S. adopted an updated

safety standard for human exposure to radio

frequency electromagnetic energy emitted by FCC

regulated transmitters. The design of this phone

complies with the FCC guidelines and those

standards.

Phone

Travel Adapter

To maintain compliance with FCC RF exposure

guidelines, if you wear a handset on your body, use

the Samsung-supplied or approved carrying case,

holster, or other body-worn accessory.

If you do not use a body-worn accessory, ensure the

antenna is at least 1.5cm from your body when

transmitting. Use of non-approved accessories may

violate FCC RF exposure guidelines.

Battery

Hand Strap Owner’s Manual

Use sensibly

In addition, you can obtain the following accessories

for your phone from your local SAMSUNG dealer:

Use only in the normal position (to ear). Avoid

unnessary contact with the antenna when the phone

is switched on.

• Cigarette lighter adapter

• Simple hands-free car kit

• Standard battery

• Data kit

• Ear-microphone

• Leather Case

Accessories and batteries

Use only SAMSUNG-approved accessories and

batteries.

• Holster

Use qualified service

Only qualified service personnel may install or repair

your phone.

Yo u r P h o n e

Your Phone

Soft keys

Perform the functions indicated by the text

above them (in the bottom line of the display).

Phone Layout

In the menu facility, scroll through the menu

options and phonebook memory.

allows you to access the Ring Tone menu,

if the Voice Active option is set to OFF,

displays the PhoneBook menu option as

default.

The following illustration shows the main elements

of your phone.

Deletes characters from the display.

In idle mode, allows you to access the WAP

Browser quickly.

Service light

Antenna

Makes or answers a call.

In idle mode, accesses the call list.

In the menu facility, selects a menu function or

stores information that you have entered (such

as a name) in the phonebook.

Earpiece

Earphone jack

Ends a call. Also switches the phone on and

off when pressed and held.

Display

Ring/Volume key

In the menu facility, returns to the idle mode

and cancels your input.

End/Power key

Enter numbers, letters and some special

characters.

Talk/Send key

Microphone

When held down in idle mode, locks the

keypad manually.

When held down, toggles the Silent mode on

and off.(This feature is not available when

the phone is connected to a optional car kit.).

During a call, adjust the earpiece volume.

In idle mode, adjust the ring volume.

When you get a call, silence the ring tone

immediately by pressing and holding it.

Yo u r P h o n e

Display

Display Layout

Icons

The display comprizes three areas.

Signal strength: shows the received

signal strength. The greater the number

of bars, the better the signal strength.

Icons

Text and

graphic area

Service: appears when a call is in

progress.

Soft key

indications

New Message: appears when a new

text message has been received.

Area

Description

Displays various icons (see opposite).

New Voice Mail: appears when a new

voice mail message has been received.

First line

Middle lines Display messages, instructions and

any information that you enter

Vibrator on/Silent mode on: appears

when the Vibrate mode or Silent mode

is active.

(number to be dialed, for example).

Last line

Shows the functions currently

assigned to the two soft keys.Or

shows various types of information,

such as missed calls, call forwarding

options, advice of charge information

or the keypad lock icon ( ). This

information varies, depending on

your SIM card, service provider or

current context.

Alarm on: appears when you set an

alarm.

Battery strength: shows the level of

your battery. The more bars you see, the

more power you have left.

Yo u r P h o n e

Getting Started

Backlight

Installing the SIM Card and the Battery

The display and keypad are illuminated by a

backlight. When you press any key, the backlight

comes on.

To specify the length of time for which the backlight

is active, set the Backlight menu option (5-1-5); see

page 81 for further details.

When you subscribe to a cellular network, you are

provided with a SIM card loaded with your subscription

details (PIN, optional services available and so on).

• Keep all SIM cards out of the reach of small

children.

• The SIM card and its contacts can be easily

damaged by scratches or bending, so be careful

when handling, inserting or removing the card.

• Before installing the SIM card, always make sure

that the phone is switched off before removing the

battery.

Note: When you are in lock mode, press and hold

down the soft key to switch on the backlight.

Service Light

There are several cases in which the service light

flashes.

1. If necessary, switch off the phone by holding

down

until the closing animation is displayed.

• When in service.

To activate or deactivate the service light, set the

Service Light menu option (5-1-6); see page 82.

To select the color of the service light, set the

Service Color menu option (5-4-4); see page 97.

2. Remove the battery. To do so:

➀ Press and hold down the catch above the

battery on the back of the phone

➀ Slide the battery away, as shown

• When an SMS message is received (the light is

yellow, only if the Message Tone is set Light

Only.).

➀

• When the alarms ring.

➀

• When you receive a call

To change the color, set the phonebook Color

option; see page 45.

Ge t t in g S t a rt e d

3. Slide the ivory-colored lock on the SIM card

holder left to unlock the holder. Lift the holder up.

5. Close the SIM card holder and slide the ivory-

colored lock right.

6. Place the battery back on the phone. Slide the

battery up towards the catch until it locks into

place. Make sure that the battery is properly

installed before switching on the power.

4. Insert the SIM card, ensuring that the cut corner

faces top left and the gold contacts of the card

face into the phone.

Ge t t in g S t a rt e d

Charging a Battery

Your phone is powered by a rechargeable Li-ion

battery. A travel adapter is provided with your phone.

Use only approved batteries and chargers. Ask your

local SAMSUNG dealer for further details.

3. When charging is finished, disconnect the adapter

from the power outlet and from the phone by

pressing the grey tabs on both sides of the

connector and pulling the connector out.

The phone can be used while the battery is charging.

Note: You must fully charge the battery before using

your phone for the first time. A discharged

battery is fully recharged in approximately

140 minutes.

1. With the battery in position on the phone connect

the lead from the travel adapter to the bottom of

the phone. Check that the arrow on the lead

connector is facing towards the front of the phone.

Low Battery Indicator

When the battery is weak and only a few minutes of

talk time remain, you will hear a warning tone and a

message will be repeated at regular intervals on the

display:

** Warning **

Battery Low

2. Connect the adapter to a standard AC wall outlet.

When the battery is charging, the battery icon

in the top right-hand corner of the display fills

repeatedly.

When the battery becomes too weak for the phone

to operate, the phone switches off automatically.

Note: Do not remove the battery from the phone

while the travel adapter is connected to the

phone.

Ge t t in g S t a rt e d

Switching the Phone On/ Off

4. When you wish to switch the phone off, hold

down for more than two seconds.

1. Hold down

for more than one second to

switch the phone on.

Note: If “Insert SIM Card” appears on the display,

please check that the SIM card is correctly

inserted.

Note: If you want to switch the phone off in lock

mode, unlock the phone first by pressing the

left soft key and pressing the

key.

2. If the phone asks for a password, key in the

password and press the OK soft key. The phone

password is factory set to 0000. For further

details, see page 119.

3. If the phone asks for a PIN, key in the PIN and

press the OK soft key. For further details, see

page 120.

The phone searches for your network and when it

finds it, the idle screen, illustrated below, is

displayed.

May 14 12:57 PM

PhoneBook

Note: The display language is determined by the

SIM card inserted. To change the language,

use the Language menu option (5-1-3).See

page 80.

Ca ll Fu n c t io n s

Call Functions

Making a Call

When the idle screen is displayed, key in the area

Ending a Call

code and phone number and press

When you have finished your call, briefly press

Note: If you have set the Auto Redial option (5-1-7) to

ON (see page 82) and the person called does not

answer or the line is busy, the number is

Making a Call from the Phonebook

redialed automatically up to ten times.

You can store the names and phone numbers of the

people you call regularly in the SIM card memory and

phone memory, called the phonebook. You then

simply select the required name to recall the

associated number. For further details on the

Phonebook feature, refer to page 41.

Making International Calls

1. Press and hold down the

key.

The + international prefix appears.

2. Key in the country code, area code and phone

number and press

Redialing the Last Number

The phone stores call records. To use any of these

numbers, proceed as follows.

Correcting the Number

To clear...

Press...

1. If there are any characters on the display, press

The last digit

displayed

the ❙ꢀsoft key.

the

key to return to the idle mode.

2. Press the

key to access the list of the last call

Any other digit

in the number

the

key

record including missed ( ), incoming ( ) and

outgoing ( ) calls.

Call records are listed in time sequence.

until the cursor ( ❘ ) is immedia-

tely to the right of the digit to

be cleared. Press the❙ soft key.

You can also insert a missing

digit simply by pressing the

appropriate key.

3. Use the

and

keys to scroll through the

numbers until the required number is displayed.

4. Press the key to dial the number displayed.

The whole display and hold down the

❙

soft key

for more than one second.

Ca ll Fu n c t io n s

Using the Voice Dialing Feature

Answering or Rejecting a Call

When the Voice Dialing function is used, by saying a

name, the number that has been associated to that

name is dialed automatically. For further details on

the Voice Dialing feature, refer to page 66.

When somebody calls you, the phone rings and the

phone icon in the middle of the screen flashes.

If the caller can be identified, the caller’s phone

number (or name if stored in your phonebook) is

displayed.

Adjusting the Volume

Answering a Call

There are two ways to answer an incoming call.

• Press the Accept soft key.

During a call, if you wish to adjust the earpiece

volume, use the volume key on the left side of the

phone.

• When the Any-Key Answer menu option is set to

ON, press any key( except

,the Reject soft key

or the volume key )

Rejecting a Call

To reject a call, press

or the Reject soft key.

Note: If you receive a call in locked mode, it deactivates

automatically. When you end the call the phone

will lock automatically after the predetermined

amount of time.

When you get a call, press and hold the volume key

to silence the ring tone immediately.

In idle mode, you can adjust the ring volume using

the same keys.

Ca ll Fu n c t io n s

Viewing Missed Calls

If you are unable to answer a call for any reason, you

can find out who was calling you, provided that this

service is available and you can then call the person

back, if necessary.

Editing a Missed Call Number

1. Press the Options soft key.

2. Press

to highlight the Paste option.

The number of missed calls is displayed on the idle

screen immediately after the call was missed.

3. Press the Select soft key.

4. Change the number as required. Press

to move back through the number.

To view the missed call immediately, proceed as

follows.

5. To...

Call the number

Press...

1. Press the View soft key.

key.

The number corresponding to the most recent

missed call is displayed, if available.

Store the number

the Save soft key and enter

the name and location

required (for further details,

refer to page 41).

2. To...

Scroll through the

Press...

key.

missed calls

Deleting a Missed Call

Call the number displayed

key.

1. Press the Options soft key.

2. Press or to highlight the Delete option.

3. Press the Select soft key.

Edit or delete a missed

call number

the Options soft key

(see opposite).

You can press

feature.

at any time to exit the Missed Call

Note: You can access the Missed Call feature at any time

by selecting the Missed Calls menu option (1-1); for

further details, see page 55.

Ca ll Fu n c t io n s

In-Call Options

Your phone provides a number of control functions

during a call. To access these functions during a call,

press the Options soft key.

Searching for a Number in the Phonebook

You can search for a number in the phonebook during

a call.

Switching the Microphone Off (Mute)

1. Press the Options soft key.

You can temporarily switch your phone’s microphone

off, so that the other party cannot hear you.

2. Press

option.

to highlight the Phonebook

Example: You wish to say something to another

person in the room but do not want the

other party to hear you.

3. Press the OK soft key.

4. Enter the start of the name that you wish to find

and press the Find soft key.

To switch the microphone off temporarily, proceed as

follows.

Note: You can also scroll through the phonebook

from the beginning, by pressing the Find

soft key directly.

1. Press the Options soft key.

2. Press

to highlight the Mute option.

The phonebook entries are listed, starting with

the first entry matching your input. This entry is

also highlighted.

3. Press the OK soft key.

Your correspondent can no longer hear you.

5. To view the highlighted entry, press the View soft

To switch the microphone back on, proceed as

follows.

key.

For a more detailed description of the Phonebook

feature, refer to page 41.

1. Press the Options soft key.

2. Press

option.

to highlight the Unmute

3. Press the OK soft key.

Your correspondent can hear you again.

Ca ll Fu n c t io n s

Putting a Call on Hold

Answering a Second Call

You can place the current call on hold whenever you

want. You can make another call while you have a

call in progress if this service is supported by the

network. Of these two calls, one is active and the

other is on hold and you can swap between the calls.

You can answer an incoming call while you have a

call in progress, if this service is supported by the

network and you have set the Call Waiting menu

option (5-2-3) to Activate (see page 89). You will be

notified of an incoming call by a call waiting tone.

To place a call on hold, press the Options soft key,

and select the Hold option. You can reactivate the

call whenever you want, by pressing the Retrieve

soft key.

To answer a call while you have a call in progress,

proceed as follows.

1. Press

to answer the incoming call.

The first call is automatically put on hold.

To make a call while you have a call in progress,

proceed as follows.

2. To switch between the two calls, press the Swap

1. Key in the phone number that you wish to dial or

look it up in the phonebook.

soft key.

To end a held call, press the Options soft key and

select the End held call option.

2. Press

to dial the second call.

The first call is automatically put on hold.

3. To end the current call, press

Or alternatively, proceed as follows.

You are automatically switched back to any held

calls.

1. Put the current call on hold by pressing the

Options soft key and selecting the Hold option.

2. Make the second call in the normal way.

To swap between the two calls, simply press the

Swap soft key.

The current call is placed on hold and the call on

hold is reactivated so that you can continue

conversing with the other party.

When you have finished, end each call normally by

pressing

Ca ll Fu n c t io n s

Making a Multiparty Call

A multiparty call is a network service that allows

up to six people to take part simultaneously in a

multiparty or conference call. For more information,

contact your service provider.

2. Highlight the required person, by pressing

or , followed by

3. Press the Private soft key.

Now you can talk privately with that person. The

other participants can continue to converse with

each other.

Setting up the Multiparty Call

1. Call the first participant in the normal way.

4. To return to the multiparty call, press the Options

soft key and select Join.

2. Call the second participant in the normal way.

The first call is automatically put on hold.

All the multiparty call participants can now hear

each other.

3. To join the first participant to the multiparty call,

press the Options soft key and select the Join

option.

Dropping One Participant

1. Press the Options soft key and choose the

Select one option.

4. To add a new person to the multiparty call, call

the person in the normal way, then press the

Options soft key and select the Join option.

The list of call participants appears.

2. Highlight the required person, by pressing

You can add incoming callers by answering the call

and pressing Options, followed by Join. Repeat as

required.

, followed by

3. Press the Remove soft key.

The call is ended with that participant, but you

can continue to talk with the other participants.

Having a Private Conversation With One

Participant

4. End the multiparty call by pressing

1. Press the Options soft key and choose the

Select one option.

The list of call participants appears.

Ca ll Fu n c t io n s

Entering Text

Muting/ Sending Key Tones

Whether storing a name in the phonebook, creating

your personal greeting or scheduling events in your

calendar, you will need to enter text.

These options allow you to turn the key tones off or

on. If the Mute keys option is selected, your phone

does not transmit the key tones.

You are provided with the following text input

modes.

Note: To communicate with answering machines or

computerized telephony systems, the Send

keys option must be selected.

T9 mode

This mode allows you to enter words with only one

keystroke per letter. Each key on the keypad has

more than one letter – when you press the

once, J, K or L may be displayed. The T9 mode

automatically compares your keystrokes with an

key

Using the SMS Service

If you receive an SMS (Short Message Service)

message during a call, the message icon (

appears in the display.

)

internal linguistic dictionary to determine the correct

word, thus requiring far fewer keystrokes than the

traditional ABC mode.

After you have finished your call, you can read the

message; refer to page 59 for further details.

ABC mode

This mode allows you to enter letters by pressing the

key labelled with the required letter once, twice

three or four times until the letter is displayed.

You can also read or write SMS messages during a call

using the option soft key and selecting ‘5 SMS Service’

and then ‘1 Read Messages’ or ‘2 Write Messages’.

Number mode

This mode allows you to enter numbers.

Symbolic mode

This mode allows you to enter special characters.

is a registered trademark of Tegic Communications, Inc.

En t e rin g Te xt

Changing the Text Input Mode

1. When you are in the T9 predictive text input

mode, start entering a word by pressing keys

to . Press each key only once for one letter.

1. When you are in a field that allows characters to

be entered, you will notice the text input mode

indicator in the lower right corner of the display.

Example: to enter HELLO in the T9 English mode,

press and

The word that you are typing appears in the display.

It may change with each key that you press.

Save

ABC

Text input mode

indicator:

ABC: ABC mode

NUM: Number mode

: T9 mode

2. Enter the whole word before editing or deleting

any keystrokes.

3. If the word is correct, start entering the next

word.

SYM: Symbolic mode

Otherwise, press

repeatedly to display

alternate word choices for the keys that you have

pressed.

2. Press the right soft key.

The modes available are displayed.

Example: OF and ME both share the sequence

3. Scroll to the required mode, then press the Select

soft key.

. The phone displays the

most commonly used choice first.

4. Complete each word with a space by pressing

Using the T9 Mode

the

key.

To type words not found in the T9 mode, change the

text input mode to the ABC mode.

The T9 predictive text input mode allows you to enter

words easily with a minimum of key presses. As you

press each key, the phone selects a letter that makes

up the word that it thinks you are typing, based on a

built-in dictionary. As a new letter is added, the word

changes based on the key that you have pressed.

To delete letters, press

to erase entire words.

. Press and hold down

En t e rin g Te xt

There are three shift options:

2. Select the other letters in the same way.

•

Lower Case (no shift indicator)

Initial Cap ( indicator)

Caps Lock ( indicator)

Note: The cursor moves to the right when you

press a different key. When entering the

same letter twice (or a different letter on the

same key), just wait for a few seconds for

the cursor to move right automatically, and

then select the next letter.

ress

one or more times to display the appro-

priate shift indicator and continue typing normally.

There are three shift options:

David

•

Lower Case (no shift indicator)

Initial Cap ( indicator)

Caps Lock ( indicator)

ENG

Press the

key one or more times to display the

Shift indicator

appropriate shift indicator in the bottom line of the

display and continue typing normally.

Note: To exit the text input mode without saving your

input, press . The phone returns to the

To insert a space, press the

key.

previous menu level.

To delete letters, press the

key. Press and hold

down the

key to clear the display.

Using the ABC Mode

Key

Characters in the Order Displayed

Use the

keys to enter your text.

Upper Case

Lower Case

1. Press the key labelled with the required letter:

• Once for the first letter

• Twice for the second letter

• And so on

;

¿ ¡ 1 = “ /

? ! 1 -

‘

A B C 2 Ä Æ Å Γ

D E F 3 É ∆

G H I 4 Θ

a b c 2 à ä æ å Ç

d e f 3 é

g h i 4 ì

J K L 5 Λ

k l

Note: To display a list of special characters, press

. See the table on the next page for

more information on the characters

available.

M N O 6 Ñ Ö Ø Ξ

P Q R S 7 Π Σ

T U V 8 Ü Φ

WX Y Z 9 Ψ Ω

0 x < > % # £

m n o 6 ñ ò ö ø

p q r s 7 ß

u v 8 ù ü

w x y z 9

0 + ( & _ $

)

En t e rin g Te xt

Phonebook

You can store phone numbers and their correspon-

ding names in the memory of your SIM card. In

addition, you can store up to 500 numbers and

names in the phone memory. The SIM card and

phone memories, although physically separate, are

used as if they were a single entity, called the

phonebook.

Using the Number Mode

The Number mode enables you to enter numbers in a

text message (a telephone number, for example).

Press the keys corresponding to the required digits

before manually switching back to the appropriate

text entry mode.

Storing a Phone Number with a Name

Using the Symbolic Mode

As soon as you start to enter a number, Save

appears above the left soft key to allow you to store

the number in the phonebook.

The Symbolic mode enables you to enter various

symbols.

1. Key in the number to be stored.

Notes:

• If you make a mistake while entering a number,

correct it using the ❙ꢀsoft key. For further

details, refer to page 22.

1 2 3 4 5 6 7 8 9

. (

;

• To insert a dialing pause for special phone

services, such as banking by phone, hold down

. ‘P’ is displayed to indicate the pause.

Save

SYM

To scroll through the symbols available, press

the or key. Press the number key

2. When you are sure that the number is correct,

press the Save soft key.

corresponding to the required symbol. The phone

then automatically switches back to the text entry

mode used immediately prior to selecting the

Symbolic mode.

3. Enter the corresponding name (the maximum

length depends on your SIM card). For information

on how to enter a name, see page 35.

4. When you are satisfied, press the Save soft key.

The phone now displays the first free location in

the SIM card for you to save the number and

name. If the card memory is full, the first free

location in the phone memory is displayed.

5. Press the right soft key to toggle between the phone

(To Phone) and card (To Card) memories.

P h o n e b o o k

6. If you do not want to save the number and name in

Voice Record

the suggested location, press

to clear the

Note: This option only appears if no name has yet

location number and enter your preferred location by

pressing the number keys.

been recorded.

This option allows you to add a voice tag to the

number.

7. Press the OK soft key to store the name and number.

You can access the phonebook options by pressing

the Options soft key, or scroll through the memory

Follow the instructions given by your phone to record

the required name.

with

8. To exit, press the

key.

Play Voice

Note: This option only appears when you have

Phonebook Options

already recorded a name.

This option plays back the names that you have

recorded.

When storing or viewing a number in the phonebook,

Options appears above the left soft key to allow you to

access the phonebook options, described in the

following paragraphs.

Voice Delete

Note: This option only appears when you have

already recorded a name.

Accessing the Options

This option allows you to delete a specific voice tag.

You are asked to confirm the deletion by pressing the

OK soft key.

To access the various phonebook options, proceed as

follows.

1. Press the Options soft key.

Paste

The first available option is highlighted.

Allows you to paste the phonebook number into the

normal dialing mode. Use this option to dial a

number similar to one in the phonebook (a different

extension in the same office for example).

2. To...

Press...

Select the

the Select soft key.

highlighted option

Use the ❙ꢀsoft key to change the number as

required (refer to page 22 for further details). When

Highlight a

key one or

you are ready to dial, press

different option

more times until the required

option is highlighted.

P h o n e b o o k

Edit

Color

Allows you to edit a number and name stored in the

phonebook.

This option allows you to assign a specific service

light color to a number and thus distinguish the caller

by the service light color.

Four colors are available (normal, orange, violet and

blue) and they can be assigned to up to five numbers.

If no specific color assigned, the service light flashes

with the color you set in the Service Color option

(5-4-4).

Erase

Allows you to erase a number and name stored in

the phonebook.

You are asked to confirm that you wish to erase the

name and number from the phonebook by pressing

the Yes soft key.

Speed-Dialing by SIM Memory Location

Once you have stored phone numbers in the SIM

card, you can dial them easily whenever required.

Copy

Allows you to copy a phonebook number to another

location. Use this option to store a number similar to

one already in memory; once copied, edit the number

and store it in another location on the SIM card or in

the phone memory.

To speed-dial a number, proceed as follows.

To speed-dial a

Press...

number in locations...

2 to 9

and hold down the

appropriate key.

Memory Status

This option allows you to check how many names and

phone numbers are stored and how many locations

are still free in the card memory and phone memory.

10 and above

the appropriate keys,

followed by the # key.

When the display shows

the name, phone number

and location, press the

Dial soft key.

Alert

This option allows you to assign a specific ringing

tone to a number and thus distinguish the caller by

the ringing tone. Specific ringing tones can be

assigned to up to five numbers.

Note: Memory location 1 is reserved for your Voice

Mail server number.

P h o n e b o o k

Searching for and Dialing a Number in the

Phonebook

Dialing a Number using the Service

Directory or Information Numbers

1. When the idle screen is displayed, press the

Note: The Service Dir. and Information Numbers

options may not be available, depending on

your SIM card.

PhoneBook soft key.

2. If your SIM card provides Service Dialing Number

(SDN) and Information Number services, press the

OK soft key when Find Entry is highlighted.

If not, go to step 3.

When the idle screen is displayed, press the

PhoneBook soft key, then you can select one of the

services.

3. Enter the start of the name that you wish to find and

Service Dir.: enables you to view the Service

Directory and make calls from it.

press the Find soft key.

Note: You can also scroll through the phonebook

from the beginning, by pressing the Find soft

key directly.

Information Numbers: enables you to see the

Information Numbers in a tree structure and make

a call.

The phonebook entries are listed, starting with the

first entry matching your input. This entry is also

highlighted.

4. To...

View the

Press...

the View soft key.

highlighted entry

Select a

key one or more

different entry

times until the required entry is

highlighted.

Look for a name the key labelled with the

starting with a

different letter

required letter.

5. Once you have found the required entry, press

dial the number.

S e le c t in g Fu n c t io n s a n d Op t io n s

Selecting Functions

and Options

To view the various functions/options available and

select the one required, proceed as follows.

Your phone offers a set of functions that allow

you to customize your phone. These functions are

arranged in menus and sub-menus, accessed via the

two soft keys. Each menu and sub-menu allows you

to view and alter the settings of a particular function.

1. Press the appropriate soft key.

2. To...

Select the:

Press...

The roles of the soft keys vary according to the

current context; the label on the bottom line of the

display just above each key indicates its current role.

the left soft key.

• Function displayed

• Option highlighted

View the next function

or highlight the next

option in a list

key.

Example:

Move back to the

previous function

or option in a list

May 14 12:57 PM

Move back up one

level in the structure

the right soft key.

key.

PhoneBook

Exit the structure

without changing

the settings

In some functions, you may be asked for a password

or PIN. Enter the required code and press

Note: When you access a list of options, your phone

highlights the current option. If, however, there

are only two options, such as On/Off or

Enable/Disable, your phone highlights the

option that is not currently active, so that you

can select it directly.

Press the left soft key

to access the menu

feature.

Press the right soft

key to access the

Phonebook feature.

Us in g t h e Me n u s

Using the Menus

The phone offers a range of functions that allow you to

tailor the phone to your needs. These functions are

arranged in menus and sub-menus.

Accessing Menu Functions by Using

Shortcuts

The menu items (menu, sub-menus and options) are

numbered and can be accessed quickly by using their

shortcut number. The shortcut number is shown in

the bottom line on the display.

The menus and sub-menus can be accessed by scrolling

or by using the shortcuts.

Accessing Menu Functions by Scrolling

1. In idle mode, press the Menu soft key to access

the menu facility.

1. In idle mode, press the Menu soft key to access the

menu facility. Scroll with the

reach the required main menu, such as Tones. Press

the Select soft key to enter the menu.

keys to

2. Key in the first digit of the shortcut number.

Repeat this for each digit of the shortcut number.

2. If the menu contains any sub-menus, Ring Tone for

example, you can access them by scrolling with the

Example: setting the Any-key Answer function

Press the Menu soft key, and key in

keys and pressing the Select soft

key.

If the menu you have selected contains further

options, repeat the same procedure.

Menu to enter the menu, 5 for Settings, 1 for

Phone Settings, 4 for Any-key Answer and 2 to

set the Any-key Answer option to ON.

3. To...

Scroll through the menus

Press...

Note: The numbers assigned to each menu option

are indicated in the list on the next page.

They may not match the menu number on

the phone. It depends on the services

supported by the SIM card.

keys.

Confirm the chosen setting the Select soft key.

Return to the previous

menu level

the

soft key.

Exit the menu, without

changing the settings

key.

Us in g t h e Me n u s

Menu Structure

Main menu

level 1

level 2

Menus let you check or change your phone settings. The

following outline shows the menu structure.

3. Voice Functions

1. Voice Dial

1. Record

2. Activate

3. Delete One

4. Play All

5. Delete All

1. Record

2. Activate

3. Play All

4. Delete All

1. Record

2. Replay

3. Delete One

4. Delete All

1. OFF/Phonebook

2. Voice Dial

3. Voice Command

Note: You can only see menu 0, if your SIM card supports

the SIM Application Toolkit. This is a network

feature. Please contact your service provider for

more information.

2. Voice Command

3. Voice Memo

4. Voice Active

Main menu

level 1

level 2

1. Call Records

1. Missed Calls

2. Incoming Calls

3. Outgoing Calls

4. Call Time

1. Last Call

2. Total Outgoing

3. Total Incoming

4. Reset Timers

1. Last Call Cost

2. Total Cost

4. Tones

1. Ring Tone

2. Melody Composer

3. Key Volume

4. Alert Type

5. Keypad Tone

6. Message Tone

7. Error Tone

5. Call Cost

3. Max Cost

4. Reset Counters

5. Set Max Cost

6. Price/Unit

8. Minute Minder

9. Connect Tone

2. Messages

1. Voice Mail

1. Connect to Voice Mail

2. Voice Server Number

5. Settings

1. Phone Settings

1. Greeting Message

2. Own Number

3. Language

4. Any-key Answer

5. Backlight

6. Service Light

7. Auto Redial

8. Car Kit Answer

9. Caller ID

2. Read Messages

3. Write Messages

4. Preset Message List

5. Setup

1. Service Center

2. Default Type

3. Default Validity

4. Reply Path

5. Delivery Report

0. KeyLock Settings

*. Reset Settings

6. Broadcast

1. Read

2. Receive

3. Channel List

4. Language

#. Active Line

7. Picture Messages

Shown only if supported by your SIM card.

May not be allowed to access if not supported by your SIM card.

Us in g t h e Me n u s

Call Records

Main menu

level 1

level 2

5. Settings

2. Network Services

1. Call Forwarding

Via this menu, you can view the phone calls:

• Missed

• Incoming

• Outgoing

2. Call Barring

3. Call Waiting

4. Network Selection

5. Line Identification

6. Closed User Group

1. PIN Check

3. Security Settings

4. LCD/LED Settings

2. Change PIN

3. Phone Lock

The number and name (if available) are displayed

together with the date and time at which the call

was made. You can also view call times and costs.

4. Change Password

5. SIM Lock

6. FDN Mode

7. Change PIN2

1. Screen Mode

2. Select Image

3. LCD Contrast

4. Service Color

Missed Calls

Menu 1-1

This option lets you view the last 15 unanswered

calls. You can also:

• Edit the number if available and dial it or save it

in the phonebook

• Delete the call from the list

• Delete all missed calls from the list

6. Organizer

1, Scheduler

2. Alarm

1. Daily Alarm

2. Once Alarm

3. Weekly Alarm

4. Alarm Tone

3. Calculator

4. World Time

5. Clock

1. Set Time

2. Set Date

3. Date Format

4. Time Format

Incoming Calls

Menu 1-2

7. Games

1. Squares

2. Fortress

3. Ice Cave

This option lets you view the last 15 incoming calls.

You can also:

• Edit the number if available and dial it or save it

in the phonebook

8. WWW Services

• Delete the call from the list

• Delete all incoming calls from the list

Shown only if supported by your SIM card.

May not be allowed to access if not supported by your SIM card.

Ca ll Re c o rd s

Outgoing Calls

Menu 1-3

Call Cost

Menu 1-5

Note: The options for this menu may vary, depending

This option lets you view the last 15 outgoing calls.

You can also:

on your SIM card.

• Edit the number and save it in the phonebook

• Redial the number

• Delete the number from the list

• Delete all outgoing calls from the list

This network feature lets you view the cost of calls.

The following options are available.

Last Call Cost: cost of the last call made.

Total Cost: total cost of all calls made since the cost

counter was last reset. If the total cost exceeds the

maximum cost set via the Set Max Cost option, you

will no longer be able to make any calls, except calls

to the emergency services, until you reset the

counter.

Call Time

Menu 1-4

This option lets you view the timers for calls made

and received. The following timers are available.

Last Call: length of the last call.

Max Cost: maximum cost set via the Set Max

Cost option (see below).

Total Outgoing: total length of all calls made since

the timer was last reset.

Reset Counters: option used to reset the cost

counter; you must first enter your PIN2 (see

page 120) and then press the OK soft key.

Total Incoming: total length of all incoming calls

since the timer was last reset.

Reset Timers: option used to reset the call timers;

you must first enter the phone password (see

page 119) and then press the OK soft key.

Set Max Cost: option used to enter the maximum

cost that you authorize for your calls. You must first

enter your PIN2 (see page 120) and then press the

OK soft key.

Note: The actual time invoiced for calls by your

service provider may vary, depending on

network features, rounding-off for billing

purposes and so forth.

Price/Unit: option used to set the cost of one unit;

this price per unit is applied when calculating the

cost of your calls. You must first enter your PIN2

(see page 120) and then press the OK soft key.

Note: AOC (Advice Of Charge) information may be

displayed in idle mode, depending on your SIM

card or service provider.

Me s s a g e s

Messages

Connect to Voice Mail

Before using this feature, you must enter the voice

server number obtained from your service provider You

can then select this option and simply press the OK

soft key to listen to your messages.

Your phone receives voice mail notification messages,

and the Short Message Service(SMS) messages. Voice

mail and SMS are network services. Please contact your

service provider for more information.

When the

mail. When the

icon appears, you have received voice

icon appears, you have received a

Note: In idle mode, you can access your voice mail

server directly by holding down the

key.

new text message. If the Message Tone menu option

(4-6) is set to Light Only, the service light flashes

yellow. If the message memory is full, an error message

Voice Server Number

You can change the voice mail server number.

is displayed, the

icon flashes and you cannot

receive any new messages. Use the Delete option in

the Read Messages menu (2-2) to delete obsolete

messages. Once there is space in the memory any

undelivered SMS messages will be received (provided

sufficient space is available).

To...

Press...

Enter the server

number

the corresponding number

keys.

Recall a number in

the phonebook

the PhoneBook soft key.

Other types of messaging is also available:

Correct a digit

the ❙ soft key.

• Picture Messages : refer to the Picture

Messages menu option (2-7); see page 64.

Move the cursor to

the left/right without

clearing the digit

key.

• Ringtone Messages : refer to the Ring Tone menu

option (4-1); see page 72.

Note: See page 41 for instructions on how to use the

phonebook.

Read Messages

Menu 2-2

Voice Mail

Menu 2-1

When the Read Messages menu is selected, the

header of the first message is displayed. This contains:

• Message number

This menu provides you with a quick way of accessing

your voice mailbox (if provided by your network).

• Message status (new, old, not sent, sent)

Me s s a g e s

To view this message, press the View soft key. The

screen shows the:

Write Messages

Menu 2-3

• Sender’s phone number (if sent with the message)

• Date and time at which the message was

received

Via this menu, you can write and edit text messages

of up to 160 characters.

• Message text

1. Key in a message. For details on how to enter

text, refer to page 35.

To scroll through the messages, press the

keys. You can choose the following options, by

pressing the Options soft key.

2. After you complete the message, you can select

the following options.

Reply: allows you to reply by sending a text

message. You can either:

Send Only: allows you to send the message

immediately. You can enter the required

destination.

• Send the message

• Save and send the message

• Save but not send the message

Save and Send: allows you to save a copy of the

message and then send the message to the

required destination. You can read the message

using the Read Messages option. When you

read the message, ‘Sent’ is displayed to indicate

the message state.

Call back: allows you to extract a number from the

message text, so that you can call the number.

Edit: allows you to edit a message.

Save Only: allows you to save the message so

that it can be sent later. When you read the

message, ‘Not sent’ is displayed.

Delete: allows you to delete obsolete messages.

Save Number: allows you to extract a number from

the message text, so that you can call the number or

save it in the phonebook.

3. After selecting the required option, press the

Select soft key.

Forward: allows you to forward a message that you

have not already sent.

The display prompts you to enter the destination

number.

Send again: allows you to resend a message that

you have already sent.

4. Enter the phone number and press the OK soft

key. Or,

Note: The options available vary, depending on the

Press the Phonebook soft key to select the

number from the phone book.

message status (new, old, not sent, sent).

Me s s a g e s

Preset Message List

Menu 2-4

Default Validity: allows you to set the length of

time for which your text messages will be stored at

the SMS center while attempts are made to deliver

them to the recipient.

Possible values are one hour, 6 hours, 24 hours, one

week and the maximum authorized by your service

provider.

Using this menu, you can preset up to five messages

that you use most frequently. This menu shows the

preset message list. Scroll through the list using

the

keys. When the required message

number appears, press the Options soft key.

Reply Path: allows the recipient of your SMS

message to send you a reply via your message

center, if the service is provided by the network.

The following options are available:

Edit: allows you to write a new message or edit the

selected preset message.

Delivery Report: allows you to activate or

deactivate the report function. When this function is

activated, the network informs you whether or not

your message has been delivered.

Send Message: allows you to recall the selected

preset message. Once you have completed the

message, you can send, save and send, or simply save

it.

Delete: allows you to delete the selected preset

message.

Broadcast

Menu 2-6

This network service allows you to receive text

messages on various topics, such as the weather or

traffic. Messages are displayed immediately they are

received, provided that:

Setup

Menu 2-5

Via this menu, you can set up default SMS

information.

•

The phone is in the idle mode

The Receive option is set to Enable

The message channel is currently active in the

channel list

Service Center: allows you to store or change the

number of your SMS center required when sending

text messages. You must obtain this number from

your service provider.

If the message is long, press the

one or more times.

and

keys

Default Type: allows you to set the default message

type (Text, Voice, Fax, X.400, Email, and ERMES). The

network can convert the messages into the selected

format.

The last five messages are also stored for later

retrieval. Please contact your service provider for

more information.

The following options are available:

Me s s a g e s

Read: lets you view the first message. Scroll through

the message using

message, press the Next soft key to move to the

. At the end of the

displayed instead of the title.

Send Message: allows you to enter the destination

phone number; you must then press the OK soft key to

send the picture message.

next message.

Receive: allows you to enable or disable the

reception of broadcast messages.

Save Number: allows you to extract a number from

the picture message, so that you can call the number

or save it in the phonebook.

Channel List: lists all available channels. The

channels currently selected are indicated by an

asterisk ( ) beside the name. When you select one of

them, you can edit, enable, disable or delete the

channel.

The Enter Channel option allows you to add a new

channel to the channel list. Enter the appropriate

channel ID obtained from your service provider, and a

title for the channel.

Receiving a Picture Message

To view a message immediately you receive it, press

the View soft key. Press the right soft key to toggle

between viewing the message and the image.

The following options are available.

Language: allows you to select your preferred

language to be used when displaying cell broadcast

messages.

Save: allows you to save the picture message to your

picture message list.

Discard: allows you to discard the picture message

without saving it.

Picture Messages

Menu 2-7

Note: This function is available between phones

The phone allows you to send and receive text

messages that contain pictures. These messages are

called ‘Picture Messages’, several of which are preset

in the phone and can be replaced with new one

received from other sources.

supporting Nokia’s* Smart Messaging services.

Each picture message is made up of several text

messages;therefore, sending one picture

message may cost more than one text message.

The following options are available:

Picture messages are stored in the phone, you

cannot view them if you use your SIM in another

phone.

Write Message: allows you to write text to send

with the picture message.

^*Nokia is a registered trademark of Nokia Corporation.

Erase: deletes the picture message; Empty is

Vo ic e Fu n c t io n s

Voice Functions

Voice Dial Record

You can use the Voice feature to customize various

settings, such as the:

• Voice Dial

Allows you to record name tags and allocate them to

numbers for voice dialing.

• Voice Command

• Voice Memo

• Voice Active

Say the name you want to use for voice dialing after

you hear a voice prompt. For best results, use names

with at least two syllables, or use both a first and

last name. The phone stores the name as a “first”

sample, and then prompts you to say the name

again.

Voice Dial

Menu 3-1

Respond to the prompt by repeating the name. The

phone stores the name as a second sample and then

requests the phone number.

The voice dialing feature allows you to make phone

calls by saying a voice tag that has been added to a

desired name and phone number. Any spoken word, for

example a name, can be a voice tag.

To store the number, press the OK soft key. Follow

the instructions described on page 41 to complete

storing the number into your internal phonebook.

Before using voice dialing, note that:

• Voice tags are not dependent on a language.They

are dependent on the speaker’s voice.

• The voice tags are sensitive to any background

noise. Where possible, record voice tags or make

calls in a quiet environment.

• When recording a voice tag or making a call, hold

the phone in the normal position close to your ear.

• The maximum length for a voice tag recording is

about 1.5 seconds, but very short names are not

recorded

Voice Dial Activate

This option activates voice dialing.

You hear a voice prompt and Say Name is

displayed. Say the voice tag clearly. If no match for

the voice tag is found or recognized, the phone may

ask you to try again. The phone automatically dials

the number of a recognized voice tag.

• You can store up to twenty voice tags in the

phone’s memory.

Note: This option is only available once you have

recorded voice tags.

Vo ic e Fu n c t io n s

Voice Command

Menu 3-2

Voice Dial Delete One

This menu allows you to get quick access to the

frequently used menus by saying your own voice

command.

Allows you to delete an individual voice tag. The

corresponding phone number remains in the

phonebook but the voice tag is deleted.

If the name displayed is... Press...

You can select the following functions:

To be deleted

the OK soft key.

Voice Command Record: The most frequently used

menu functions are programmable with your own

voice commands. The menus are preset to OFF at the

factory, indicating that they are not recorded. When

voice commands are recorded successfully, the

menus are changed to ON in the display.

Not to be deleted

key.

The next name is

displayed.

To exit the Voice Dial Delete One option, press the

soft key.

Voice Command Activate: Use this menu to

access the menu of the recorded voice commands.

Voice Dial Play All

Voice Command Play All: Plays all voice

commands you have recorded.

Allows you to play back all recorded voice tags.

Voice Command Delete All : Deletes all

commands you have recorded.

Voice Dial Delete All

Allows you to delete all voice tags. The

corresponding phone numbers remain in the

phonebook but the voice tags are all deleted. Press

the OK soft key when the message ‘Delete All

confirm?’ is displayed.

Voice Memo

Menu 3-3

You can use the Voice Memo feature to :

• Record up to 3 voice memos

• Play the recorded voice memos

• Delete one or all voice memos

Otherwise, press the Cancel soft key to exit the

function without deleting the voice tags.

Vo ic e Fu n c t io n s

Voice Memo Record: Allows you to record a

memo. The screen displays the:

• Memo location

• Date and time when the memo was recorded

• Recording time counter

Voice Active

Menu 3-4

This setting automatically enables the voice dial or

voice command mode when you press the

in idle mode.

key

The maximum recording time is about 35 seconds.

If you want to record for longer, press the Continue

soft key. Split appears instead of Continue. You can

continue recording and the rest of the memo is

stored in the next memo location.

The following options are available:

OFF/Phonebook: The voice dial or voice command

mode must be activated manually.

To stop recording, press the Stop soft key.

Voice Dial: The voice dial mode is activated when

you press the

key in idle mode.

Note: If all memo locations are full, you must delete

an old memo before recording a new one.

Voice Command: The voice command mode is

activated when you press the

mode.

key in idle

Voice Memo Replay: Allows you to play back all

memos recorded, starting with the most recent

memo. The screen displays the:

• Memo location

• Date and time when the memo was recorded.

To skip to the next memo, press the Skip soft key, to

stop the playback, press the Stop soft key.

Voice Memo Delete One: Allows you to delete a

specific memo. All memos recorded are played back,

starting with the most recent one.

Voice Memo Delete All: Allows you to delete all

memos. Press the OK soft key to confirm.

To n e s

Tones

3. Select the ringing tone location you wish to save it

and press the OK soft key.

You can use the Tones menu to customize various sound

settings, such as the:

• Ringing tone or melody, volume and type

• Sounds made when you press a key, make an error or

receive a message

4. To use this tone as the current ringing tone, press

the Yes soft key. Otherwise press the No soft key.

If your SIM card supports the ALS feature, this option

also allows you to select a different ringing tone for

each line, and thus distinguish incoming calls.

Note: The silent mode allows you to turn the various

tones off when discretion is required. Press and

hold down

deactivating the silent mode.

to toggle between activating and

Note: While downloading ring tones, if the battery is

detached from the phone, you can lose the

downloaded ringtones.

Ring Tone

Menu 4-1

This option allows you to select the required ringing tone.

There are 25 different tones available; 8 pre-defined ring

tones, 12 changeable tones*, 2 using the Melody

Composer and 3 by SMS.

Melody Composer

Menu 4-2

This option allows you to compose your own melody

to be used as the ringing tone.

Note:

• Three octaves are available.

•

You can change the changeable ringtones

by another downloading service. Please

contact your service provider or Samsung

service center to check its availability.

• A maximum of 50 notes can be entered.

• You can adjust the length of the notes and add

rests, as required.

•This feature is only available if your service

Composing a Melody

provider supports it.

1. When you access the menu, the names of any

melodies created are displayed. Otherwise,

(Empty) appears. Select the melody that you wish

to create or edit.

When you receive a ringing tone message, proceed as

follows.

1. To listen to the tone, press the Play soft key.

2. To save the ring tone, press the Save soft key.

2. Press the Select soft key and compose your

*For further details, refer to http://www.samsungmobile.com

melody using the following keys.

To n e s

3. When you are satisfied with your melody, press the

To...

Press...

key.

Yes soft key.

Enter C, the first note

in the musical scale

4. Enter a title for the melody.

Note: For further details on how to enter

characters, refer to page 35.

Enter D

Enter E

Enter F

Enter G

Enter A

Enter B

key.

You are asked if the melody is to become the

ringing tone.

5. To use the melody as the ringing tone, press the

Yes soft key.

The melody is saved and is played each time your

phone rings.

key.

Move a note up or

down one octave

Enter a rest

Deleting a Melody

key (press the key

until the rest is of the

required length).

1. Select the melody that you wish to delete.

2. Press and hold

for a few seconds.

Delete notes

key.

All notes are erased.

Move a note a

semitone up or down

key (for

3. Press the Listen soft key. You are asked to confirm

that you wish to delete the melody by pressing the

Yes soft key.

example, the note A changes

to A#, B, C, C#, and so on in

the scale each time you press

the

key).

Key Volume

Menu 4-3

Add # to a note or

not

key.

This option allows you to adjust the key volume level.

Use the or keys. The greater the number of

bars, the greater the volume level.

Change the length

of a note

key (the length

will be changed each time

you press the key)

Listen to your melody the Listen soft key.

Cancel your changes key.

To n e s

Alert Type

Menu 4-4

Message Tone

Menu 4-6

This option allows you to indicate how you are to be

informed of any incoming calls. The following options are

available:

This option allows you to select how the phone

informs you that a new message has been received.

The following options are available:

OFF: no ringer or vibrating when new messages are

received.

Light only: only the backlight is switched on; the phone

neither rings nor vibrates.

Melody: the phone rings using the ringing tone

Light Only: just the service light flashes indicating a

selected via menu option 4-1.

new message has been received. No ring or Vibrate.

Vibration: the phone vibrates but does not ring.

Single: the phone vibrates or the selected SMS tone

is heard one time.

Vibra+Melody: the phone both rings and vibrates.

Periodic: the phone vibrates or the selected SMS

tone sounds periodically.

Note: If set to Vibration, the phone does not make

any sound when you switch your phone on/off.

Keypad Tone

Menu 4-5

Error Tone

Menu 4-7

This option allows you to select the tone that the

keypad generates when you press a key. The following

options are available:

This option allows you to select how the phone

informs you that you have made a mistake. The

following options are available:

OFF: the keys do not make any sound.

OFF: the phone does not beep.

Tone: each key, when pressed, makes a different sound.

Beep: each key, when pressed, makes the same sound.

ON: the phone beeps to indicate an invalid entry.

To n e s

Settings

Minute Minder

Menu 4-8

Many different features of your phone can be

customized to suit your preferences. All of these

features are accessed via the Settings menu.

This option allows you to specify whether the phone

must beep every minute during an outgoing call to

keep you informed of the length of your call. The

following options are available:

Phone Settings

Menu 5-1

OFF: the phone does not beep.

ON: the phone beeps every minute.

Greeting Message

This option allows you to set a greeting message to

be displayed briefly when the phone is switched on.

The current message is displayed.

Connect Tone

Menu 4-9

To...

Press...

This option allows you to specify whether the phone

should beep when the phone connects to the

network. The following options are available:

Clear the existing message

key and hold it

down until the message

is cleared.

OFF: the phone does not beep.

ON: the phone beeps when your call is accepted.

Enter a new message

the appropriate

alphanumeric keys.

For more information on how to enter characters,

refer to page 35.

To go back to the previous menu level without saving

your input, press

S e t t in g s

Own Number

Any-key Answer

Note: The contents of this menu may vary,

Depending on the setting of the Any-key Answer

depending on the SIM card.

option, you can answer an incoming call by pressing

any key, except

keys.

To reject the call, press

the Reject soft key or volume

You can enter your own name and number using this

menu. If you have subscribed to the Alternate Line

or the Reject soft key.

Service, you can select a line with

The following options are available:

ON: you can press any key, except

, the Reject

soft key or volume keys.

Edit: allows you to edit the name and number.

OFF: you can only press

or the Accept soft key.

Erase: allows you to erase the name and number.

Backlight

Language

You can select whether or not the phone uses the

backlight. A marginal increase in standby/talk time

can be achieved by turning the backlight off. The

following options are available:

You can select the text language. When the

language option is set to Automatic, the language

is automatically selected according to the language

of the SIM card used.

Short: the backlight comes on when you press a key

or receive a call and switches off 10 seconds after

the last key is pressed.

You can also set the default text input mode. For

details on the text input modes available, refer to

page 35.

Long: the backlight comes on when you press a key

or receive a call and switches off 20 seconds after

the last key is pressed.

OFF: the backlight is not used.

S e t t in g s

Service Light

Caller ID

This option allows you to select whether or not the

service light on the top of the phone is used.

The following options are available:

You can prevent your phone number from being

displayed on the phone of the person being called.

Note: Some networks do not allow the user to

change this setting.

ON: the service light flashes when the phone is

ready for use.

The following options are available:

OFF: the service light is not used.

Default: the default setting provided by the network

is used.

Hide Number: your number is not displayed on the

other person’s phone.

Auto Redial

With the Auto Redial function, the phone makes up

to ten attempts to redial a phone number after an

unsuccessful call.

Send Number: your number is sent each time you

make a call.

Note: The interval between two call attempts varies.

KeyLock Settings

The following options are available:

ON: the number is redialed automatically.

OFF: the number is not redialed.

With the key lock function, you can prevent accidental

key pressing.

15 seconds/ 30 seconds/ 1 minute/ 2 minutes:

When set, the lock icon( )is visible in the display

and your key input doesn’t work in idle mode. To

activate the key pad, press the left soft key and

Car Kit Answer

press the

key. The keypad is automatically

With the Car Kit Answer function, the phone auto-

matically answers calls after 3, 5 or 10 seconds. You

can also turn this feature off.

locked if no key is pressed within the set time.

OFF: the keypad will not lock automatically.

Note: You can make the keypad lock manually by

Note: This feature only operates when the phone is

pressing and holding the

key in

connected to a car kit (optional).

idle mode regardless of this key lock setting.

S e t t in g s

Call Forwarding

Reset Settings

Note: Some call forwarding options may not be shown

if they are not supported by your network

operator.

You can easily reset your phone to its default

configuration. To do so, proceed, as follows.

1. Select the Reset Settings menu option.

This network service enables incoming calls to be

rerouted to the number that you specify.

2. Enter the 4-digit phone password.

Example: You may wish to forward your business calls

to a colleague while you are on holiday.

Note: The password is preset to 0000. To change this

password, refer to page 95.

Call forwarding can be set up in the following ways.

Active Line

Forward Always: all calls are forwarded.

Some SIM cards may be used with two subscriber

numbers (network service). This function is available

only if your SIM card supports it.

Unavailable: calls are forwarded if you are busy, do

not answer or cannot be reached.

This menu allows you to select the line to be used

when making calls. However, calls can be answered on

both lines, regardless of the line selected. When you

select a line, the line number appears as an indicator

after the operator/service provider’s names.

Cancel All: all call forwarding options are cancelled.

Note: These options may be different, depending on

the SIM card.

You can specify individual forwarding options for each

of the following call types:

• Voice calls only

• Fax calls only (not available when line 2 is in use)

• Data calls only (not available when line 2 is in use)

When you select the Manual option, you can choose a

line whenever you access the call barring, forwarding

and waiting features; the active line is not displayed.

Example: You can:

Network Services

Menu 5-2

• Systematically forward fax calls to your

office fax machine

• Forward voice calls to your colleague if

you are already using the phone

These menu functions are network services.

Please contact your service provider to check their

availability and subscribe to them, if you so wish.

S e t t in g s

To set your call forwarding options, proceed as

follows.

3. Press the Remove soft key.

The phone sends your settings to the network and the

network’s acknowledgement is displayed.

1. Select the type of call forwarding required by

pressing

until the appropriate

You can also deactivate all call forwarding settings by

selecting the Cancel All option.

option is highlighted, and then press the Select

soft key.

2. Select the type of calls to be forwarded by

Note: When all calls are forwarded, one of the

indicators below is displayed on the last line of the

display,if supported by your SIM card.

pressing

until the appropriate

option is highlighted and then press the Select

soft key.

Forward Line 1: all calls from line 1 are

forwarded.

Forward Line 2: all calls from line 2 are forwarded.

Forward All: all calls from lines 1 and 2 are

forwarded.

3. Press the Activate soft key to confirm your settings.

4. Enter the number to which the calls are to be

forwarded.

To enter the international code, press and hold 0

until the + sign is displayed. You can also select a

number in the phonebook or the voice server

number, by pressing the Options soft key,

followed by PhoneBook or Voice Server

Number.

Call Barring

The call barring network service allows you to restrict

your calls.

Call barring can be set up in the following ways.

All outgoing: calls cannot be made.

5. When you are satisfied, press

key.

or the OK soft

International: international calls cannot be made.

The phone sends your setting to the network and

the network’s acknowledgement is displayed.

International except to home: when abroad, calls can

be made only to numbers within the current country and

to your home country, that is the country where your

home network provider is located.

To deactivate specific call forwarding settings,

proceed as follows.

1. Select the call forwarding option to be

deactivated.

All Incoming: calls cannot be received.

Incoming while abroad: calls cannot be received

when you are using your phone outside your home

service area.

2. Select the type of call to which this option applies.

Cancel All: all call barring settings are deactivated; calls

can be made and received normally.

S e t t in g s

Change Barring Password: you can set and

To set your call barring options, proceed as follows.

1. Select the type of call barring required by pressing

change the call barring password obtained from your

service provider using this option. You must enter the

current password before you can specify a new one.

until the appropriate option is

highlighted and then press the Select soft key.

Once you have entered a new password, you are

asked to confirm it by entering it again.

2. Select the type of calls to be barred by pressing

the

key until the appropriate option

is highlighted and then press the Select soft key.

Call Waiting

3. Press the Activate soft key to confirm your

This network service enables you to be informed when

someone is trying to reach you during another call.

settings.

4. Enter your call barring password supplied by your

service provider.

To set your call waiting options, proceed as follows.

1. Select the type of calls to which the call waiting

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

option is to be applied by pressing

until the appropriate option is highlighted and

then press Select.

To deactivate specific call barring settings, proceed

as follows.

2. Press the Activate soft key to confirm your

settings.

1. Select the call barring option to be deactivated.

2. Select the type of call to which this option applies.

3. Press the Remove soft key.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

To deactivate specific call waiting settings, proceed

as follows.

4. Enter your call barring password supplied by your

service provider.

1. Select the type of call to which the option applies.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

2. Press the Deactivate soft key.

The phone sends your settings to the network and

the network’s acknowledgement is displayed.

You can also deactivate all call barring settings by

selecting the Cancel All option.

You can also deactivate all call waiting settings by

selecting the Cancel All option.

S e t t in g s

Network Selection

Line Identification

May not be allowed to access if not supported by your SIM card.

This option allows you to view the following line

identification settings.

The Network Selection feature enables you to

indicate whether the network used when roaming

(outside your home area) is selected automatically or

manually

CLIP (Calling Line Identification Presentation) /

COLP (Connected Line Identification Presentation)

If these network functions are active, the caller’s

number is displayed during a call. If the phone

number matches one stored in the phonebook, the

caller’s name is also displayed.

CLIR (Calling Line Identification Restriction) /

COLR (Connected Line Identification Restriction)

If these network functions are active, your phone

number is not displayed on the called person’s phone.

Note: You can select a network other than your

home network only if it has a valid roaming

agreement with your home network.

To indicate whether the network is to be selected

automatically or manually when roaming, proceed as

follows.

1. When Network Selection is displayed, press

the Select soft key.

2. Press

until the appropriate option is

highlighted and press the OK soft key.

If you select Automatic, you are connected to the

first available network when roaming.

If you select Manual, the phone scans for the

available networks. Go to Step 3.

3. Press

until the preferred network is

highlighted and press the OK soft key.

You are connected to that network when roaming.

S e t t in g s

Outside Access: enables you to allow or prohibit

calls to numbers other than those nominated for the

Closed User Group. This feature depends on the

nature of your CUG subscription. Please check with

your service provider.

Closed User Group (CUG)

This network service allows incoming and outgoing

calls to be restricted to a selected user group. You

may be a member of up to 10 user groups.

For details on how to create, activate and use a

closed user group, contact your service provider.

Default Group: you may communicate a default

CUG to your service provider. If you have done so,

you can enable the Default Group option on your

phone. When making a call, you will be given the

option of using your default CUG, instead of

selecting one from the list.

Example: A company lends SIM cards to its

employees and wants to restrict outgoing

calls to members of the same team.

Activating a Closed User Group

If you select the Closed User Group menu, you are

asked if you wish to activate the CUG function. Press

the Yes soft key. You can now access the following

options:

Security Settings

Menu 5-3

The Security feature enables you to restrict the use

of your phone to:

Deactivate: deactivates the CUG function.

• The people of your choice

• The types of calls of your choice

Index List: lets you list, add or delete CUG index

numbers. The list of current CUG indexes appears.

Add a new CUG index (as advised by your service

provider) or delete a selected group.

Various codes and passwords are used to protect the

features of your phone. They are described in the

following sections (also see page 119).

To...

Press...

Scroll through the

key.

existing CUG indexes

Add a new CUG index the Options soft key, select

Add and enter the index.

Delete a CUG index

key to select

the index to be deleted,

press the Options soft key

and select Delete.

S e t t in g s

The following options are available:

PIN Check

Enable: you are required to enter the phone

password when you switch the phone on.

When the PIN Check feature is enabled, you must

enter your PIN each time you switch the phone on.

Consequently, any person who does not have your

PIN cannot use your phone without your approval.

Disable: you are not asked to enter the phone

password when you switch the phone on.

Note: Before disabling the PIN Check feature, you

Note: When you select one between Disable/Enable

options, you’re asked to enter the password

first.

must enter your PIN.

The following options are available:

Change Password

Enable: you must enter the PIN each time the phone

is switched on.

The Change Password feature allows you to change

your current phone password to a new one. You must

enter the current password before you can specify a

new one.

Disable: the phone connects directly to the network

when you switch it on.

Change PIN

The password is factory set to 0000. Once you have

entered a new password of up to 4 digits, you are

asked to confirm it by entering it again.

This feature allows you to change your current PIN

to a new one, provided that the PIN Check feature is

enabled. You must enter the current PIN before you

can specify a new one.

SIM Lock

When the SIM Lock feature is enabled, your phone

only works with the current SIM.

Once you have entered a new PIN, you are asked to

confirm it by entering it again.

Once you have entered the lock code, you are asked

to confirm it by entering it again.

Phone Lock

When the Phone Lock feature is enabled, the phone

is locked and you must enter the phone password

each time the phone is switched on.

To unlock the SIM, you must enter the SIM lock code.

FDN Mode

The password is factory set to 0000. To change the

phone password, refer to the Change Password

menu option (5-3-4).

Once the correct password has been entered, you

can use the phone until you switch it off.

The FDN (Fixed Dial Number) mode, if supported by

your SIM card, allows you to restrict your outgoing

calls to a limited set of phone numbers.

S e t t in g s

The following options are available:

Clock: The LCD displays an analogue clock. To

display the normal mode for a while, press any key.

Enable: you can only call phone numbers stored in

the phonebook. You must enter your PIN2.

Select Image

Disable: you can call any number.

This option allows you to select the image to be

displayed when you set the Screen Mode option to

Image Display. You can select one of the images.

Note: Not all SIM cards have a PIN2. If your SIM card

does not, this menu option is not displayed.

Change PIN2

LCD Contrast

The Change PIN2 feature allows you to change your

current PIN2 to a new one. You must enter the

current PIN2 before you can specify a new one.

Once you have entered a new PIN2, you are asked to

confirm it by entering it again.

This option allows you to adjust the contrast of the

LCD screen. Press

decrease the contrast.

to increase or

Service Color

Note: Not all SIM cards have a PIN2. If your SIM card

does not, this menu option is not displayed.

There are six colors available for the service light:

normal (green), yellow, orange, violet, blue and sky

blue.

LCD/ LED Settings

Menu 5-4

You can scroll through these colors, by pressing the

The LCD/LED Settings menu enables you to set the

style of the LCD display.

key. Press the Select soft key to select

the required color.

Screen Mode

You can select the screen image to be displayed in

idle mode.

Normal Mode: the LCD displays <Service

Provider> and the current time and date.

Image Display: The LCD displays the image

selected via the Select Image option. To display the

normal mode for a while, press any key.

Org a n iz e r

Organizer

To schedule a new event, proceed as follows.

1. When the calendar is displayed, use the

The Organizer feature enables you to:

• Write your schedule

• Use a calculator

• Set the current date and time

• Set the alarm so that the phone rings at a specific

time (to remind you of an appointment for

example)

• Find out what time it is in various cities around

the world

and

keys to select the month, the

keys to select the week and the

and

keys to select the day. You can also use the

Go to date menu option to specify the date.

Note: To exit the Calendar screen, press

The phone returns to the previous menu

level.

2. Press the OK soft key.

Scheduler

Menu 6-1

3. Select a schedule type. Four types are available:

Reminder: requires a description and the time.

Call: requires a phone number and the time.

Meeting: requires a description and the time.

Birthday: requires a name and the time.

The Scheduler helps you to keep track of reminders,

calls that you need to make, meetings and birthdays.

The phone alarm rings when the date set for a

birthday, reminder or call is reached.

4. Enter the appropriate information, referring to

page 35 for further details on how to enter text if

necessary.

When you access the Scheduler menu, the

following options are available:

Go to date: allows you to enter a particular date and

schedule an event on that date.

5. If you wish to set the alarm to ring on the

scheduled date and time, select Yes. Otherwise,

select No.

View All: shows the events scheduled.

Delete All: deletes all scheduled events.

6. If you selected Yes, set the time for the alarm

and press the OK soft key.

Org a n iz e r

A date that has a schedule already associated is

displayed in bold. If you select such a date, you will

see the contents.

To set the alarm, proceed as follows.

1. Select an alarm type by pressing the Select soft

key.

Note: If you have scheduled more than one event on

The Set Alarm option allows you to set the alarm

time or days of the week.

a given day, you can scroll to the required

event by pressing

2. If you choose Weekly Alarm, select the required

The following options are available:

day of the week and press

The symbol appears to indicate that the day is

selected.

Add: allows you to add new contents.

Delete: deletes the scheduled event.

To remove it, press

Move: moves the scheduled event to a new date.

You can set more than one day.

Copy: copies the scheduled event to a new date.

3. Press the OK soft key.

Delete Day: deletes all events scheduled on that

date.

4. Enter the required time, then press the OK soft

key.

Alarm Activated is displayed.

Alarm

Menu 6-2

The alarm icon ( ) appears in the top line of the

display. The service light flashes in white when the

alarm rings. To stop the alarm when it rings, press

the Exit soft key or press any key.

This option allows you to set the alarm to ring at a

specific time when your phone is switched on. You

can set one or more alarms.

To deactivate the alarm, select Remove Alarm.

The following alarms are available:

Daily Alarm: the alarm rings every day at the same

time.

Once Alarm: the alarm rings only once and is then

deactivated.

Weekly Alarm: the alarm rings every week on the

same day and at the same time.

The Alarm Tone option allows you to select a

specific tone for the alarm.

100

101

Org a n iz e r

Examples:

Expression

Calculator

Menu 6-3

Key Sequence

Result

You can use the phone as a 9-digit calculator. The

calculator provides the basic arithmetic functions:

addition, subtraction, multiplication, division,

percentages.

12*3+5=

12x3+5

(or

)

34+57=

45+57=

34+57

(or

)

102

48-23=

14-23=

48-23

(or

)

-9

To use the calculator, proceed as follows.

68*25=

68*40=

68x25

(or

)

1700

2720

1. Enter the first number using the number keys.

2. Press the Functions soft key until you find the

appropriate arithmetic symbol: + (add),

- (subtract), x (multiply), / (divide).

35/14=

98/14=

35/14

(or

)

2.5

10% of 200

10=? % of 100

200x10

10/100

3. Enter the second number.

10% premium of 200 200+10

10% discount of 200 200-10

220

180

4. Repeat Steps 2 and 3 if necessary.

5. To calculate the result to two decimal places,

square of 4

reciprocal of 8

(or

)

0.12

press the Equal soft key or the

key.

To erase any mistakes or clear the display, press

the key.

To enter a decimal point, press the

key.

Note: When you have finished with the calculator,

press to return to the previous menu level.

102

103

Org a n iz e r

World Time

Menu 6-4

Clock

Menu 6-5

You can use your phone to check the current time in

21 major cities around the world. Scroll through the

Set Time

cities using the

The screen shows the:

• City name

key.

This option allows you to change the time displayed,

using the 12 or 24-hour system.

Note: Before setting the time, you must specify your

• Current date and time

time zone, via the World Time menu option (6-4).

• Time difference between the selected city and your

city if you have set the local time (see below for

further details) or GMT (by default)

Set Date

This option allows you to change the date displayed.

Enter the day, month and year, using the format

specified in the option below.

To select the time zone in which you are located,

proceed as follows.

1. Select the city corresponding to your time zone by

Date Format

pressing the

keys one or more times.

This option allows you to select the date format:

The local date and time are displayed.

•

DD/MM/YYYY (day, month, year)

MM/DD/YYYY (month, day, year)

2. Press the Set soft key.

3. To...

Press...

Time Format

Update the current

the Set Local soft key.

This option allows you to select the time format:

date/time with this

new setting

•

12H

24H

Indicate that the

the Set DST soft key.

time zone is currently A check mark is shown

using the daylight

saving time

next to the time

difference.

Indicate that the

the Remove DST soft key

time zone is no longer (only available when a

using the daylight

saving time

check mark is shown

next to the time

difference).

104

105

Ga m e s

Games

If, on finishing you are ranked within the top five

highest scores, you will be allowed to enter a name of

up to 10 characters.

Using this menu you can also enjoy games on the

phone.

Here are the list of available characters or function.

1: . @ - _ / : ~ 1

2: A B C 2

3: D E F 3

Scroll to the desired game and press the Select soft

key.

4: G H I 4

5: J K L 5

6: M N O 6

7: P Q R S 7

The following options are available:

New Game: allows you to start a new game.

High Score: show you the high score list.

8: T U V 8

9: W X Y Z 9

0: 0

Key Info.: shows you the key usage.

: to clear a previous character

left/right soft key: to move the cursor left or

right

Continue: allows you to enjoy the paused status. It

enables only when the game was paused before.

: to move the cursor to the next position

While you are playing a game,

To...

Press...

Squares

Menu 7-1

adjust the game volume

volume keys

Object

toggle the backlight

on and off

The goal of the game is to remove the required number

of blocks by joining the falling pieces together. A block

is a collection of 3 or more pieces that have been

correctly joined together. When this is achieved the

block is automatically removed from the screen and any

remaining pieces will move across the screen were

possible. Each piece can be moved and rotated as it

falls. There are three kinds of special pieces; ‘H’ breaks

all pieces in a horizontal line, ‘V’ breaks all pieces in a

vertical line, and ‘S’ breaks all pieces around it.

Each level is completed when you have removed the

specified number of blocks shown as ‘Remain’ in the

107

pause the game

pause and exit the game

106

Ga m e s

top right of the display.

Key Commands

When you start a new game, press any key to display

the game setting menu.

2: move up the cannon

8: move down the cannon

4: move left the cannon

6: move right the cannon

5: shoot

To...

Press...

scroll up or down menu

level up/ down

start a game

the left /right soft key

Ice Cave

Menu 7-3

Key Commands

Object

2: move up

8: move down

4: move left

5: rotate

The goal of the game is to move eggs into the hole

in ice cave safely within the given period of time.

The penguin can push the egg, push pieces of ice

that are blinking and jump. The egg will break if it

falls from higher than 4 steps.

Fortress

Menu 7-2

You can see the ‘T’=time, ‘L’=life, and ‘S’=stage

information on the right side of the display.

Object

When you start the game and the initial animation

finishes, you can adjust the stage using the left or

The goal of the game is to defend the earth against

UFOs. You can check the appearance of UFOs in the

radar at the bottom of the screen. Each level is

completed if you manage to defend the city without

running out of time or energy. You can monitor your

energy and remaining time in the left and right parts of

the radar.

right soft key. Press the

key to start the stage.

Key Commands

2: scroll up the screen

8: scroll down the screen

4: move left

6: move right

5: jump

When you start a new game, you see a map of the

earth. The ‘V’ marks mean you have already defended

that city. Press any key to start the game.

#: retry

108

109

WWW S e rv ic e s

WWW Services

Navigating with the WAP Browser

You can use your phone as a Web Browser.

You can obtain up-to-date news, weather, sport, and

other information as well as use e-mail and other

Internet services.

You can surf the Internet using either the phone keys

or the WAP Browser menu.

Using the Phone Keys

Please contact your service provider to open your

Internet account. To use the Web Browser, you must

indicate your phone number via the Own Number

menu option (5-1-2).

When surfing the Internet, the phone keys function

differently from the phone mode.

To...

Press...

To launch the browser from the idle mode, press the

Scroll each line of the

content area

Menu soft key, followed by the

key.

Return to the previous page

key (except on

the homepage).

You can also launch the browser by pressing the

key, followed by the OK soft key when ‘Launch

Browser’ is displayed.

Return to the startup

homepage

key and hold it

down anywhere.

Once connected, the homepage is displayed. The

content depends on the service provider.

Using the WAP Browser Menu

You can open any WWW page by entering its URL

address.

You can enter the URL address by pressing the

key long in browser mode, then press the Go soft key.

There are various menu options available when

surfing the Wireless Web.

To access the WAP Browser menu, proceed as

follows.

To exit the browser at any time, press the

The idle screen is displayed.

key

1. Press

A list of menu options appears.

2. Highlight the required option using the

key.

110

111

WWW S e rv ic e s

3. Press the OK soft key to select the option.

abc/Abc/ABC: allows you to enter lower-case and

upper-case letters. You can switch between lower-

4. If necessary, select the secondary option by

and upper-case letters by pressing the

key.

pressing the

key, followed by OK.

SYM1 ~ 4: allows you to enter various symbols and

punctuation marks. To view more symbols, press the

More soft key.

Note: The WAP Browser menus may vary,

depending on your version of the browser.

The following options are available:

NUM: allows you to enter numbers.

Reload: reloads the current page.

If you wish to edit text, move the cursor to the

Home: takes you back at any time to the homepage

of the Wireless Web service provider.

required position, using the

key and

clear the wrong letter by pressing the

enter the correct letter.

key. Then

About Openwave: shows the version of the WAP

Browser.

Network Connection Information

Restart Browser: clears the cache memory and

To check the network connection time, press and

displays the homepage.

hold down the

key. You can see the connection

Encryption: allows you to check and generate the

security key required to contact a server.

time on the last line of the content area. The linger

time is one or more minutes (depending on your

service provider). Consequently, if you do not use the

browser for one or more minutes, the network is

disconnected automatically. In this case, you can see

that the connection time is stopped at that point.

The connection time is reset whenever you exit the

browser.

Entering Text, Numbers, or Symbols

When you are prompted to enter text, the current

text entry mode appears above the right soft key:

abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,

press the right soft key until the required mode is

displayed.

112

113

Ad d it io n a l S e rv ic e s

Additional Services

ALS (Alternate Line Service)

3. Setting the Ring Type

Note: Please contact your service provider to check

the availability of this feature and how to

subscribe to it.

To distinguish between incoming calls on the two

lines, you can select a different ring tone for each line

with the Ring Tone menu option (4-1). See page 72

for further details.

The ALS feature enables two lines to be associated

with one SIM card. Consequently, you can make and

receive calls on either line as required. If you

subscribe to this network service, a few additional

menu options enable you to set up this feature.

4. Setting Call Forwarding Options

You can set up call forwarding options for each line,

via the Call Forwarding menu option (5-2-1). This

service enables you to forward calls received on a

given line to the number specified. See page 85 for

further details.

1. Selecting a Line

With the Active Line menu option (5-1-#), you can

set a line to be used automatically when you make a

call or you can select the line manually for each call.

For further details, refer to page 84.

2. Editing the Line Name

You can edit the name of each line via the Own

Number menu option (5-1-2).

When you edit the name of a line, the name is

displayed, whenever necessary, instead of “Line 1” or

“Line 2”. For further details, refer to page 80.

114

115

S o lv in g P ro b le m s

Solving Problems

“No service” is displayed

Before contacting the after-sales service, perform the

following simple checks. They may save you the time

and expense of an unnecessary service call.

• The network connection was lost. You may be in a

weak reception area (in a tunnel or surrounded by

buildings). Move and try again.

• You are trying to access an option for which you

have not taken out a subscription with your

service provider. Contact the service provider for

further details.

When you switch your phone on, the following

messages appear

Insert SIM Card

• Check that the SIM card is correctly installed.

You have entered a number but it was not dialed

• Have you pressed

• Are you accessing the right cellular network?

• You may have set an outgoing call barring option.

Phone Locked

• The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Your correspondent cannot reach you

• Is your phone switched on ( pressed for more

than one second)?

• Are you accessing the right cellular network?

• You may have set an incoming call barring option.

Enter PIN

• You are using your phone for the first time. You

must enter the Personal Identification Number

supplied with the SIM card.

• The option requiring that the PIN be entered each

time the phone is switched on has been enabled.

You must enter your PIN and then disable this

option if so required.

Your correspondent cannot hear you speaking

• Have you switched off the microphone

(

appears)?

• Are you holding the phone close enough to your

mouth? The microphone is located in the bottom

center of the phone.

Enter PUK

• The PIN code was entered wrongly three times in

succession and the phone is now blocked. Enter

the PUK supplied by your network operator.

116

117

S o lv in g P ro b le m s

Reference Information

The phone starts beeping and “** Warning **

Battery Low” flashes in the display

• The battery is insufficiently charged. Replace the

battery with a charged one and recharge it or

connect the battery charger.

Access Codes

There are several access codes that are used by your

phone and its SIM card. These codes help you protect

the phone against unauthorized use.

The audio quality of the call is poor

• Check the signal strength indicator in the display

( ); the number of bars after it indicates the

The access codes (except for the PUK and PUK2

codes) can be changed using the Security Settings

menu options (5-3). See page 93 for further details.

signal strength from strong (

) to weak ( ).

• Try moving the phone slightly or moving closer to

a window if you are in a building.

Phone Password

The phone password can be set to avoid unauthorized

use of the phone. The password generally supplied

with the phone is 0000. You are advised to change it

before you start using your phone.

No number is dialed when you recall a phonebook

entry

• Check that the numbers have been stored

correctly, by using the Phonebook Search feature.

• Re-store them, if necessary.

Keep the new password secret and in a safe place,

separate from the phone.

If the above guidelines do not enable you to solve

the problem, take a note of:

• The model and serial numbers of your phone

• Your warranty details

• A clear description of the problem

Then contact your local dealer or SAMSUNG

after-sales service.

118

119

Re f e re n c e In f o rm a t io n

PUK

The PUK (Personal Unblocking Key) is required to

change a blocked PIN. The PUK may be supplied with

the SIM card. If not, contact your local service

provider.

The PIN (Personal Identification Number) protects

your SIM card against unauthorized use. The PIN is

usually supplied with the SIM card. When the PIN

Check feature is enabled (menu option 5-3-1), the

PIN is needed each time the phone is switched on.

If you key in an incorrect PUK ten times in

succession, the SIM card cannot be used anymore.

Contact your service provider for a new card.

If you key in an incorrect PIN three times in

succession, key in the PUK and press the OK soft key

Key in a new PIN and press the OK soft key. Key in

the new PIN again and press the OK soft key.

You cannot change the PUK. If you lose it, contact

your service provider.

PIN2

PUK2

The PIN2, supplied with some SIM cards, is required

to access specific functions, such as call cost

counters. These functions are only available if

supported by your SIM card.

The PUK2, supplied with some SIM cards, is required

to change a blocked PIN2.

If you key in an incorrect PUK2 ten times in

succession, you cannot use the functions requiring

the PIN2. Contact your service provider for a new

card.

If you key in an incorrect PIN2 three times in

succession, key in the PUK2 and press the OK soft

key. Key in a new PIN2 and press the OK soft key.

Key in the new PIN2 again and press the OK soft

key.

You cannot change the PUK2. If you lose it, contact

your service provider.

Barring Password

The 4-digit barring password is required when you use

the Call Barring function. You obtain the password

from your service provider when you subscribe to this

function.

120

121

Re f e re n c e In f o rm a t io n

Health and Safety Information

Tests for SAR are conducted using standard operating

positions specified by the FCC with the phone

transmitting at its highest certified power level in all

tested frequency bands. Although the SAR is

Exposure to Radio Frequency (RF) Signals

Your wireless phone is a radio transmitter and

receiver. It is designed and manufactured not to

exceed the emission limits for exposure to radio

frequency (RF) energy set by the Federal

determined at the highest certified power level, the

actual SAR level of the phone while operating can be

well below the maximum value. This is because the

phone is designed to operate at multiple power levels

so as to use only the power required to reach the

network. In general, the closer you are to a wireless

base station antenna, the lower the power output.

Communications Commission of the U.S.

Government. These limits are part of comprehensive

guidelines and establish permitted levels of RF

energy for the general population. The guidelines are

based on the safety standards previously set by both

U.S. and international standards bodies:

Before a phone model is available for sale to the

public, it must be tested and certified to the FCC that

it does not exceed the limit established by the

government-adopted requirement for safe exposure.

The tests are performed in positions and locations

(e.g., at the ear and worn on the body) as required by

the FCC for each model. (Body-worn measurements

may differ among phone models, depending upon

available accessories and FCC requirements). While

there may be differences between the SAR levels of

various phones and at various positions, they all meet

the government requirement for safe exposure.

• American National Standards Institute (ANSI)

IEEE. C95.1-1992

• National Council on Radiation Protection and

Measurement (NCRP). Report 86. 1986

• International Commission on Non-Ionizing

Radiation Protection (ICNIRP) 1996

• Ministry of Health (Canada), Safety Code 6.

The standards include a substantial safety margin

designed to assure the safety of all persons,

regardless of age and health.

For body worn operation, to maintain compliance with

FCC RF exposure guidelines, use only Samsung-

approved accessories. When carrying the phone while

it is on, use the specific Samsung-supplied or

approved carrying case, holster, or other body-worn

accessory.

The exposure standard for wireless mobile phones

employs a unit of measurement known as the

Specific Absorption Rate, or SAR. The SAR limit set

by the FCC is 1.6W/kg *.

*In the U.S. and Canada, the SAR limit for mobile phones used by the public is 1.6 watts/kg

(W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of

safety to give additional protection for the public and to account for any variations in

measurements.

Use of non-Samsung-approved accessories may

violate FCC RF exposure guidelines and should be

avoided.

122

123

Re f e re n c e In f o rm a t io n

Precautions When Using Batteries

For additional information concerning exposure to

radio frequency signals, see the following websites:

Your phone is powered by a rechargeable Li-ion

standard battery.

Federal Communications Commission (FCC)

RF Safety program (select “Information on Human

Exposure to RF Fields from Cellular and PCS Radio

Transmitters”):

• Never use any charger or battery that is damaged

in any way.

http://www.fcc.gov /o et/rfsafety

• Use the battery only for its intended purpose.

Cellular Telecommunications Industry

Association (CTIA): http://www.wow-com.com

• If you use the phone near the network’s base

station, it uses less power; talk and standby time

are greatly affected by the signal strength on the

cellular network and the parameters set by the

network operator.

World Health Organization (WHO)

International Commission on Non-lonizing Radiation

Protection (select Qs & As):

http://www.who.int/emf

• Battery charging time depends on the remaining

battery charge and the type of battery and charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out.

When the operation time (talk time and standby

time) is noticeably shorter than normal, it is time

to buy a new battery.

United Kingdom, National Radiological

Protection Board: http://www.nrpb.org.uk

U.S.Food and Drug Administration (FDA)

Center for Devices and Radiological Health:

http://www.fda.gov /c drh /c onsumer/

• If left unused, a fully charged battery will

discharge itself over time.

• Use only Samsung-approved batteries and

recharge your battery only with Samsung-approved

chargers. When a charger is not in use, disconnect

it from the power source. Do not leave the battery

connected to a charger for more than a week,

since overcharging may shorten its life.

124

125

Re f e re n c e In f o rm a t io n

Road Safety

Your wireless phone gives you the powerful ability to

communicate by voice - almost anywhere, anytime.

But an important responsibility accompanies the

benefits of wireless phones, on that every user must

uphold.

• Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

• Do not leave the battery in hot or cold places, such

as in a car in summer or winter conditions, as you

will reduce the capacity and life-time of the

When driving a car, driving is your first responsibility.

When using your wireless phone behind the wheel of

a car, practice good common sense and remember

the following tips:

battery. Always try to keep the battery at room

temperature. A phone with a hot or cold battery

may temporarily not work, even when the battery

is fully charged. Li-ion batteries are particularly

affected by temperatures below 0 °C (32 °F).

1. Get to know your wireless phone and its features

such as speed dial and redial. If available, these

features help you to place your call without taking

your attention off the road.

• Do not short-circuit the battery. Accidental short

circuiting can occur when a metallic object (coin,

clip or pen) causes a direct connection between

the + and - terminals of the battery (metal strips

on the back of the battery), for example when

you carry a spare battery in a pocket or bag.

Short-circuiting the terminals may damage the

battery or the object causing the short-circuit.

2. When available, use a hands free device. If

possible, add an additional layer of convenience and

safety to your wireless phone with one of the many

hands free accessories available today.

3. Position your wireless phone within easy reach. Be

able to access your wireless phone without removing

your eyes from the road. If you get an incoming call

at an inconvenient time, if possible, let your voice

mail answer it for you.

• Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

4. Let the person you are speaking with know you are

driving; if necessary, suspend the call in heavy traffic

or hazardous weather conditions. Rain, sleet, snow,

ice, and even heavy traffic can be hazardous.

5. Do not take notes or look up phone numbers while

driving. Jotting down a “to do” list or flipping

through your address book takes attention away from

your primary responsibility, driving safely.

126

127

Re f e re n c e In f o rm a t io n

Operating Environment

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

pulling into traffic. Try to plan calls when your car

will be stationary. If you need to make a call while

moving, dial only a few numbers, check the road and

your mirrors, then continue.

Remember to follow any special regulations in force

in any area and always switch off your phone

whenever it is forbidden to use it, or when it may

cause interference or danger.

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

7. Do not engage in stressful or emotional

conversations that may be distracting. Make people

you are talking with aware you are driving and

suspend conversations that have the potential to

divert your attention from the road.

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it is

recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

8. Use your wireless phone to call for help. Dial 9-1-1

or other local emergency number in the case of fire,

traffic accident or medical emergencies. Remember,

it is a free call on your wireless phone!

9. Use your wireless phone to help others in

emergencies. If you see an auto accident, crime in

progress or other serious emergency where lives are

in danger, call 9-1-1 or other local emergency

number, as you would want others to do for you.

Electronic Devices

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against

the RF signals from your wireless phone.

10. Call roadside assistance or a special non-

emergency wireless assistance number when

necessary. If you see a broken-down vehicle posing

no serious hazard, a broken traffic signal, a minor

traffic accident where no one appears injured, or a

vehicle you know to be stolen, call roadside

consult the manufacturer to discuss alternatives.

Pacemakers

assistance or other special non-emergency wireless

number.

Pacemaker manufacturers recommend that a

minimum separation of 6 inches (15 cm) be

maintained between a wireless phone and a

pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent

128

129

Re f e re n c e In f o rm a t io n

with the independent research by and recommen-

dations of Wireless Technology Research.

Persons with pacemakers:

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

• Should always keep the phone more than 6

inches (15cm) from their pacemaker when the

phone is switched on;

Posted Facilities

Switch off your phone in any facility where posted

notices so require.

• Should not carry the phone in a breast pocket;

• Should use the ear opposite the pacemaker to

minimize the potential for interference.

• If you have any reason to suspect that

interference is taking place, switch off your

phone immediately.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a

potentially explosive atmosphere and obey all signs

and instrutions. Sparks in such areas could cause an

explosion or fire resulting in bodily injury or even

death.

Hearing Aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such interference,

you may want to consult your hearing aid

manufacturer to discuss alternatives.

Users are advised to switch off the phone while at a

refueling point (service station). Users are reminded

of the need to observe restrictions on the use of

radio equipment in fuel depots (fuel storage and

distribution areas), chemical plants or where blasting

operations are in progress.

Other Medical Devices

If you use any other personal medical devices,

consult the manufacturer of your device to determine

if they are adequately shielded from external RF

energy. Your physician may be able to assist you in

obtaining this information. Switch off your phone in

health care facilities when any regulations posted in

these areas instruct you to do so.Hospitals or health

care facilities may be using equipment that could be

sensitive to external RF energy.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

below deck on boats; chemical transfer or storage

facilities; vehicles using liquefied petroleum gas

(such as propane or butane); areas where the air

contains chemicals or particles, such as grain, dust

or metal powders; and any other area where you

would normally be advised to turn off your vehicle

engine.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

130

131

Re f e re n c e In f o rm a t io n

Emergency Calls

Other Important Safety Information

• Only qualified personnel should service the

phone, or install the phone in a vehicle. Faulty

installation or service may be dangerous and

may invalidate any warranty which may apply to

the unit.

This phone, like any wireless phone, operates using

radio signals, wireless and landline networks as well

as user-programmed functions which cannot guarantee

connection in all conditions. Therefore, you should

never rely solely upon any wireless phone for essential

communications (for example, medical emergencies).

• Check regularly that all wireless phone

equipment in your vehicle is mounted and

operating properly.

Remember, to make or receive any calls the phone

must be switched on and in a service area with

adequate signal strength. Emergency calls may not be

possible on all wireless phone networks or when

certain network services and/or phone features are in

use. Check with local service providers.

• Do not store or carry flammable liquids, gases or

explosive materials in the same compartment as

the phone, its parts or accessories.

• For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including both installed or

portable wireless equipment in the area over the

air bag or in the air bag deployment area. If in

vehicle wireless equipment is improperly

installed and the air bag inflates, serious injury

could result.

To make an emergency call:

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present

location (for example, 911 or other official emergency

number). Emergency numbers vary by location.

3. Press the <SEND> key.

If certain features are in use (keyguard, restrict calls,

etc.), you may first need to turn those features off

before you can make an emergency call. Consult this

document and your local cellular service provider.

• Switch off your phone before boarding an

aircraft. The use of wireless phones in aircraft

may be dangerous to the operation of the

aircraft, and may be illegal.

When making an emergency call, remember to give all

the necessary information as accurately as possible.

Remember that your phone may be the only means of

communication at the scene of an accident - do not cut

off the call until given permission to do so.

• Failure to observe these instructions may lead to

the suspension or denial of telephone services

to the offender, or legal action, or both.

132

133

Re f e re n c e In f o rm a t io n

Care and Maintenance

• Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean it. Wipe it with a soft

cloth slightly dampened in a mild soap-and-water

solution.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you to fulfill any

warranty obligations and allow you to enjoy this

product for many years. When using your phone,

battery, charger, or any accessory:

• Do not paint it. Paint can clog the device’s moving

parts and prevent proper operation.

• Use only the supplied or an approved replacement

antenna. Unauthorized antennas, modifications of

attachments could damage the phone and may

violate regulations governing radio devices.

• Keep it and all its parts and accessories out of

small children’s reach.

• Keep it dry. Precipitation, humidity and liquids

contain minerals that will corrode electronic

circuits.

• If the phone, battery, charger, or any accessory is

not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if neccessary, arrange for service.

• Do not use or store it in dusty, dirty areas as its

moving parts can be damaged.

• Do not store it in hot areas. High temperatures

can shorten the life of electronic devices, damage

batteries, and warp or melt certain plastics.

• Do not store it in cold areas. When the phone

warms up (to its nomal operating temperature),

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

• Do not drop, knock or shake it. Rough handling

can break internal circuit boards.

134

135

Re f e re n c e In f o rm a t io n

Acknowledging Special Precautions and the FCC

and Industry Canada Notice

Cautions

Modifications not expressly approved by the party

responsible for compliance could void the user's authority

to operate the equipment.

Information to User

This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation.

This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is

no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and

receiver.

• Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/ TV

technician for help.

136

Glossary

To help you understand the main technical terms and

abbreviations used in this booklet and take full

advantage of the features on your mobile phone, here

are a few definitions.

ALS (Alternate Line Service)

Capability of associating two alternate lines with one

SIM card. You can make and receive calls on either

line as required.

Call Barring

Ability to restrict outgoing and incoming calls.

Call Forwarding

Ability to reroute calls to another number.

Call Holding

Ability to put one call on standby while answering or

making another call; you can then switch between

the two calls, as required.

Call Waiting

Ability to inform users that they have an incoming call

when engaged on another call.

137

Glo s s a ry

GSM (Global System for Mobile Communication)

PUK (PIN Unblocking Key)

International standard for cellular communication,

guaranteeing compatibility between the various

network operators. GSM covers most European

countries and many other parts of the world.

Security code used to unlock the phone when an

incorrect PIN has been entered three times in

succession. The eight-digit number is supplied by

the service provider with the SIM card.

Line Identification Services

Roaming

Service allowing subscribers to view or block the

telephone numbers of callers.

Use of your phone when you are outside your home

area (when travelling for example).

Multiparty Calling

SIM (Subscriber Identification Module)

Ability to establish a conference call involving up to

five additional parties.

Card containing a chip with all the information

required to operate the phone (network and memory

information, as well as the subscriber’s personal

data). The SIM card fits into a small slot on the back

of the phone and is protected by the battery.

Phone Password

Security code used to unlock the phone when you

have selected the option to lock it automatically each

time it switches on.

SMS (Short Message Service)

Network service sending and receiving messages to

and from another subscriber without having to speak

to the correspondent. The message created or

received (up to 160 characters long) can be

displayed, received, edited or sent.

PIN (Personal Identification Number)

Security code that protects the phone/SIM card

against unauthorized use. The PIN is supplied by the

service provider with the SIM card. It may be a four

to eight-digit number and can be changed, as

required.

138

139

Glo s s a ry

Index

Soft Keys

Calls (continued)

redialing • 23

ABC text mode • 38

Access codes • 119

Accessories • 9

Active Line (5-1-#) • 84

Alarm (6-2) • 100

Alert Type (4-4) • 44; 76

ALS • 114

Answering

a call • 25

Keys marked

of which:

• Varies according to the function that you are

currently using

• Is indicated on the bottom line of the display just

above the corresponding key

and

on the phone, the purpose

automatically • 82

rejecting • 25

searching for a number in

the phonebook • 46

time (1-4) • 56

via the phonebook • 46

waiting (5-2-3) • 89

Car Kit Answer (5-1-8) • 82

Card

a second call • 31

Any-key Answer (5-1-4) • 81

Auto Redial (5-1-7) • 82

installing SIM • 15

Care • 134

Voice Mail

Changing

call barring

Computerized answering service that automatically

answers your calls when you are not available, plays

a greeting (optionally in your own voice) and records

a message.

password • 89

Backlight • 14; 81

Barring

password (5-3-4) • 95

PIN (5-3-2) • 94

PIN2 (5-3-7) • 96

text modes • 36

Characters

calls (5-2-2) • 87

password • 89; 121

Batteries

charging • 18

changing modes • 36

entering • 35

Charging batteries • 18

Clock (6-5) • 105

type • 97

Closed User Group

(5-2-6) • 92

Color

service light • 14; 97

Composer

Melody (4-2) • 73

Conference calls • 32

Connect

to Voice Mail (2-1-1) • 59

Tone (4-9) • 78

Contrast (5-4-3) • 97

Copying phonebook

numbers • 44

Cost of calls • 57

CUG (5-2-6) • 92

installing • 15

low battery indicator • 19

precautions • 125

Broadcast (2-6) • 63

Browser

using (8) • 110

Calculator (6-3) • 102

Caller ID (5-1-9) • 83

Calls

answering • 25

a second call • 31

barring (5-2-2) • 87

cost (1-5) • 57

emergency • 132

ending • 23

forwarding (5-2-1)• 85

holding • 30; 89

incoming (1-2) • 55

international • 22

making • 22

Date

missed (1-1) • 26; 55

multiparty • 32

outgoing (1-3) • 56

records (1) • 55

format (6-5-3) • 105

setting (6-5-2) • 105

Deleting

missed calls • 27

phonebook numbers • 44

schedules • 100

140

141

In d e x

Dialed Calls (1-3) • 56

Dialing • 22

Keypad locking • 83

Keys • 10; 11

memory status • 44

options • 42

pasting numbers • 43

ring tones • 44

Names

Display • 12

entering • 35

contrast • 97

searching/dialing • 46

storing in the

Language (5-1-3) • 80

Last number redialing • 23

automatic • 82

LCD

icons • 13

searching/dialing • 46

storing numbers/

names • 41

language • 80

phonebook • 41

Network Selection

(5-2-4) • 90

Network Services (5-2) • 84

Numbers

Forwarding calls (5-2-1) • 85

Picture Messages (2-7) • 64

PIN • 120

changing (5-3-2) • 94

checking (5-3-1) • 94

PIN2 • 120

changing (5-3-7) • 96

Preset Message

List (2-4) • 62

layout • 12

Earpiece volume • 24

Editing

settings (5-4) • 96

LED indicator • 14

Length of calls • 56

Letters

copying phonebook • 44

correcting • 22

editing

messages • 61

missed calls • 27

phonebook numbers • 44

schedules • 100

Emergency calls • 132

Erasing

changing modes • 36

entering • 35

Line

active • 84

identification (5-2-5) • 91

Locking

keypad • 21;83

phone (5-3-3) • 94

SIM card (5-3-5) • 95

Low battery indicator • 19

missed call • 27

phonebook • 44

entering • 40

Problem solving • 116

PUK • 121

PUK2 • 121

erasing phonebook • 44

fixed dial • 95

missed calls • 27

phonebook numbers • 44

schedules • 100

Error Tone (4-7) • 77

mode • 40

own • 80

Read Messages (2-2) • 59

Records

call (1) • 55

Redialing

redialing • 23

automatically • 82

searching/dialing • 46

storing • 41

Fixed Dial Number (FDN)

mode (5-3-6) • 95

Functions

automatically • 82

last number • 23

Rejecting calls • 25

Maintenance • 134

Melody Composer (4-2) • 73

Memory status • 44

Menus • 52-54

selecting • 48

Operator logo• 58

Options

Reset Settings (5-1- ) • 84

Ring

selecting • 48

Games (7) • 106

Greeting Message

(5-1-1) • 79

Groups

Messages

tone (4-1) • 72

type • 76

Organizer (6) • 98

Outgoing Calls (1-3) • 56

Own Number (5-1-2) • 80

broadcast (2-6) • 63

greeting (5-1-1) • 79

operator logo • 58

picture (2-7) • 64

preset (2-4) • 62

reading (2-2) • 59

ringtone • 73

volume • 24

ringing tone messages • 77

Roaming • 90

user • 92

Password

barring • 121

Holding calls • 30; 89

Safety

changing • 89

setup (2-5) • 62

tone (4-6) • 77

batteries • 125

information • 122

Scheduler (6-1) • 98

preset (2-4) • 62

SDN • 47

phone • 119

changing (5-3-4) • 95

Pasting numbers • 43

Phone

Lock (5-3-3) • 94

password • 95; 119

settings (5-1) • 79

Phonebook • 41

alert tone • 44

colors • 45

Icons • 13

voice mail (2-1) • 58

writing (2-3) • 61

Microphone mute • 28

Minute Minder (4-8) • 78

Missed calls (1-1) • 26; 55

Multiparty calls • 32

Mute

Identifying a caller • 83

Image

screen • 96

Searching for names/

numbers • 46

Security (5-3) • 93

Selecting functions/

options • 48

Sending

key tones • 34

messages • 61

Incoming Calls (1-2) • 55

Key tones

muting • 34

selecting • 76

sending • 34

volume (4-3)• 75

key tones • 34

microphone • 28

copying numbers • 44

dialing • 46

editing numbers • 44

erasing numbers • 44

making calls • 23; 46

142

143

In d e x

Service

colors • 97

User groups • 92

dialing numbers

(SDN) • 47

light (5-1-6) • 14; 82

Vibration • 76

Settings

Voice Active (3-4) • 71

Voice Command (3-2) • 69

Voice Dial (3-1) • 66

activating • 67

alarm • 101

date • 105

language • 80

LCD • 96

deleting numbers • 68

playing recorded

names/numbers• 68

recording • 67

network • 84

phone • 79

reset • 84

security • 93

earpiece • 24

service color • 97

time • 105

Voice Functions (3) • 66

Voice Memo (3-3) • 69

deleting • 70

Setup (2-5) • 62

Silent mode • 11

SIM card

recording • 70

replaying • 70

installing • 15

locking (5-3-5) • 95

precautions • 15

SMS

Voice Server Number

(2-1-2) • 59

Volume adjustment

earpiece • 24

see Messages

Soft keys • 48

Solving problems • 116

Speed dialing • 45

Switching on/off

microphone • 28

phone • 20

game • 106

keypad • 75

Waiting

calls • 30; 89

WAP Browser • 110

World Time (6-4) • 104

Write Messages (2-3) • 61

WWW Services (8) • 110

Symbolic mode • 40

Text

changing modes • 36

entering • 35

Time

call (1-4) • 56

format • 105

setting (6-5-1) • 105

world (6-4) • 104

Tone

connect (4-9) • 78

error (4-7) • 77

keypad (4-5) • 76

melody • 73

message (4-6) • 77

ring (4-1) • 72

Travel adapter • 18

T9 mode • 36

145

144

146

Toshiba MK4006GAH User Manual
The Singing Machine SMG 299 User Manual
Siemens RS 485 User Manual
Seagate U Series 9 CE User Manual
Seagate PIPELINE HD ST1500VM002 User Manual
SanDisk SDUFD2AA 4096 User Manual
Samsung B450 User Manual
Rosewill RX DU100 User Manual
Philips CD SOUNDMACHINE AZ102N User Manual
Panasonic SL CT582V User Manual