DUAL BAND
GSM TELEPHONE
SGH-N400
OWNER’S MANUAL
ELECTRONICS
Some of the contents in this manual may differ from your
phone, depending on the software installed, your SIM card
or your service provider.
Printed in Korea
World Wide Web
Code No.: GH68-02005A
English. 09/2001. Rev.1.0
GLOBAL SYSTEMS FOR
MOBILE COMMUNICATIONS
Contents
(continued)
Entering Text . . . . . . . . . . . . . . . . . . . 42
Changing the Text Input Mode . . . . . . . . . . . 43
Using the T9 Mode . . . . . . . . . . . . . . . . . . . . . 44
Using the ABC Mode . . . . . . . . . . . . . . . . . . . 46
Using the Number Mode . . . . . . . . . . . . . . . . 48
Using the Symbolic Mode . . . . . . . . . . . . . . . 48
Voice Functions . . . . . . . . . . . . . . . . . . 70
Voice Dial (Menu 3-1). . . . . . . . . . . . . . . . . . . 70
Voice Command (Menu 3-2) . . . . . . . . . . . . . 73
Voice Memo (Menu 3-3). . . . . . . . . . . . . . . . . 73
AnswerPhone (Menu 3-4) . . . . . . . . . . . . . . . 75
Tones . . . . . . . . . . . . . . . . . . . . . . . . . 76
Ring Tone (Menu 4-1) . . . . . . . . . . . . . . . . . . . 76
Melody Composer (Menu 4-2). . . . . . . . . . . . 76
Ring Volume (Menu 4-3). . . . . . . . . . . . . . . . . 79
Alert Type (Menu 4-4). . . . . . . . . . . . . . . . . . . 79
Keypad Tone (Menu 4-5) . . . . . . . . . . . . . . . . 80
Message Tone (Menu 4-6). . . . . . . . . . . . . . . 80
Error Tone (Menu 4-7). . . . . . . . . . . . . . . . . . . 81
Minute Minder (Menu 4-8). . . . . . . . . . . . . . . 81
Connect Tone (Menu 4-9). . . . . . . . . . . . . . . . 81
Selecting Functions and Options . . . . . . 49
Example: Selecting an Alert Type . . . . . . . . . 51
Using the Menus . . . . . . . . . . . . . . . . . 53
Accessing Menu Functions by Scrolling . . . 53
Accessing Menu Functions by
Using Shortcut Numbers . . . . . . . . . . . . . . . . 54
Accessing Menu Functions by
Using Shortcut Keys . . . . . . . . . . . . . . . . . . . . 54
Menu Map . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Settings . . . . . . . . . . . . . . . . . . . . . . . 82
Phone (Menu 5-1) . . . . . . . . . . . . . . . . . . . . . . 82
Network Services (Menu 5-2) . . . . . . . . . . . . 88
Security (Menu 5-3) . . . . . . . . . . . . . . . . . . . . 98
LCD (Menu 5-4) . . . . . . . . . . . . . . . . . . . . . . . . 101
Quick Menu (Menu 5-5) . . . . . . . . . . . . . . . . . 102
Browser (Menu 5-6) . . . . . . . . . . . . . . . . . . . . 103
Auto Antenna (Menu 5-7). . . . . . . . . . . . . . . . 104
Call Records . . . . . . . . . . . . . . . . . . . . 60
Missed Calls (Menu 1-1) . . . . . . . . . . . . . . . . 60
Received Calls (Menu 1-2). . . . . . . . . . . . . . . 60
Dialled Calls (Menu 1-3). . . . . . . . . . . . . . . . . 61
Call Time (Menu 1-4). . . . . . . . . . . . . . . . . . . . 61
Call Cost (Menu 1-5) . . . . . . . . . . . . . . . . . . . . 62
Messages . . . . . . . . . . . . . . . . . . . . . . 63
Voice Mail (Menu 2-1) . . . . . . . . . . . . . . . . . . 63
Read Messages (Menu 2-2). . . . . . . . . . . . . . 64
Write Messages (Menu 2-3) . . . . . . . . . . . . . 65
Preset Message List (Menu 2-4). . . . . . . . . . 66
Setup (Menu 2-5) . . . . . . . . . . . . . . . . . . . . . . 67
Broadcast (Menu 2-6) . . . . . . . . . . . . . . . . . . 68
Chatting (Menu 2-7) . . . . . . . . . . . . . . . . . . . . 69
4
5
Safety Precautions
Contents
(continued)
Organiser . . . . . . . . . . . . . . . . . . . . . . 105
Scheduler (Menu 6-1). . . . . . . . . . . . . . . . . . . 105
Alarm (Menu 6-2) . . . . . . . . . . . . . . . . . . . . . . 107
Calculator (Menu 6-3). . . . . . . . . . . . . . . . . . . 108
To Do List (Menu 6-4) . . . . . . . . . . . . . . . . . . . 110
Calendar (Menu 6-5). . . . . . . . . . . . . . . . . . . . 111
World Time (Menu 6-6). . . . . . . . . . . . . . . . . . 112
Clock (Menu 6-7). . . . . . . . . . . . . . . . . . . . . . . 113
Read these simple guidelines. Failure to comply with
them may be dangerous or illegal.
For more detailed safety information, see Safety
Information on page 129.
Road safety comes first
Do not use a hand-held phone while driving; park the
vehicle first. Remember that in some countries, it is
illegal to use a hand-held phone while driving.
Games . . . . . . . . . . . . . . . . . . . . . . . . 114
Switch off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
WWW Services . . . . . . . . . . . . . . . . . . 115
Launching the Browser . . . . . . . . . . . . . . . . . 115
Exiting the Browser . . . . . . . . . . . . . . . . . . . . 115
Using Local Bookmarks . . . . . . . . . . . . . . . . . 115
Opening a Page Directly . . . . . . . . . . . . . . . . 116
Navigating with the WAP Browser. . . . . . . . 117
Network Connection Information . . . . . . . . . 119
Switch off in aircraft
Mobile phones can cause interference. Using them
on aircraft is both illegal and dangerous.
Additional Services. . . . . . . . . . . . . . . . 120
Respect special regulations
ALS (Alternate Line Service) . . . . . . . . . . . . . 120
Follow any special regulations in force in any area
and always switch off your phone whenever it is
forbidden to use it, or when it may cause interference
or danger (in a hospital for example).
Solving Problems . . . . . . . . . . . . . . . . . 122
Reference Information . . . . . . . . . . . . . 125
Access Codes . . . . . . . . . . . . . . . . . . . . . . . . 125
Using the Batteries . . . . . . . . . . . . . . . . . . . . 127
Safety Information . . . . . . . . . . . . . . . . . . . . . 129
Interference
All mobile phones may be subject to radio
interference, which may affect their performance.
Glossary . . . . . . . . . . . . . . . . . . . . . . 133
Index . . . . . . . . . . . . . . . . . . . . . . . . . 136
6
7
S a f e t y P re c a u t io n s
Unpacking
Qualified service
Your package contains the following items.
Only qualified service personnel must repair cellular
equipment. Use only approved accessories and
batteries.
Use sensibly
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Phone
Travel Adapter
Emergency calls
Ensure that the phone is switched on and in service.
Enter the emergency number (112 or another official
emergency number) and press the
key. Give your
location. Do not end the call until given permission to
do so.
End the call by closing the phone or pressing
.
Standard Battery
Owner’s Manual
IMPORTANT! Use only SAMSUNG-approved
accessories. The use of any other power accessory
will invalidate any approval or warranty applying to
the phone, and may be dangerous.
In addition, you can obtain the following accessories
for your phone from your local SAMSUNG dealer:
• Cigarette lighter adapter
• Simple hands-free car kit
• Additional standard batteries
• Data kit
When you disconnect the power cord of any
accessory, grasp and pull the connector, not the cord.
• Earphone*
• Desktop charger*
* Depending on the country, this accessory may be supplied
in the standard package.
8
9
Yo u r P h o n e
Your Phone
Phone Layout
The following illustration shows the main elements
of your phone.
Soft keys
Perform the functions indicated by the text
above them (in the bottom line of the display).
Antenna
Earphone jack
In the menu facility, scrolls through the menu
options and phonebook memory.
In idle mode, accesses your favourite menu
options directly. You can assign menu options
to each direction via the Quick Menu
option. For further information, see page 102.
Service
light
Volume and menu keys
During a call, adjust
the earpiece volume.
In idle mode with
the flip cover open,
adjust the key tone
volume.
Earpiece
Display
Deletes characters from the display.
In the menu facility,
select a menu option.
Makes or answers a call.
In idle mode, recalls the last number dialled.
In the menu facility, selects a menu function
or stores information that you have entered
(such as a name) in the phone or SIM memory.
In idle mode, allows
you to access the WAP
service quickly.
Microphone
Ends a call. Also switches the phone on and
off when pressed and held.
In the menu facility, returns to the idle mode
and cancels your input.
Enters numbers, letters and some special
characters.
Flip cover
If the flip cover is detached
from the phone either
accidentally or on purpose,
it can be easily clipped
back on to the phone.
In idle mode, toggles the Silent mode on
and off.
10
11
Yo u r P h o n e
Yo u r P h o n e
Display
Display Layout
Icons
The display comprises three areas.
Signal strength: shows the received
signal strength. The greater the number
of bars, the better the signal strength.
Icons
Text and
graphic area
Service: appears when a call is in
progress.
Soft key
indications
New Message: appears when a new
text message has been received.
Menu
PhoneBook
New Voice Mail: appears when a new
voice mail message has been received.
Area
Description
First line Displays various icons (see page 13).
Vibrator on/Silent mode on: appears
when the Vibrate mode or Silent mode is
active.
Middle
lines
Display messages, instructions and any
information that you enter (number to
be dialled, for example).
Last line With the flip cover open, shows the
functions assigned to the two soft keys.
Alarm on: appears when you set the
alarm.
With the flip cover closed, shows
various types of information, such as
the keypad lock icon ( ), answerphone,
call diverting options or advice of
charge information. This information
varies, depending on your SIM card,
service provider or current context.
Battery strength: shows the level of
your battery. The more bars you see, the
more power you have left.
12
13
Yo u r P h o n e
Getting Started
Backlight
Installing the SIM Card and the Battery
The display and keypad are illuminated by a
When you subscribe to a cellular network, you are
provided with a SIM card loaded with your
subscription details (PIN, optional services available
and so on).
backlight. When you open the flip cover, press any
key or hold down one of the volume keys with the
flip cover closed, the backlight comes on. It turns off
if no key is pressed within a given period of time,
depending on the Backlight option in the Phone
menu. The backlight remains on at all times when
the phone is connected to a car kit (optional).
• Keep all SIM cards out of the reach of small
children.
• The SIM card and its contacts can be easily
damaged by scratches or bending, so be careful
when handling, inserting or removing the card.
• Before installing the SIM card, always make sure
that the phone is switched off before removing the
battery.
To specify the length of time for which the backlight
is active, set the Backlight menu option (5-1-5); see
page 84 for further details.
Service Light
1. If necessary, switch off the phone by holding
The service light in the top right-hand corner of the
phone flashes when services are available on the
phone.
down the
displayed.
key until the closing animation is
To activate or deactivate the service light, set the
Service Light menu option (5-1-6); see page 85 for
further details.
2. Remove the battery. To do so:
➀ Slide the catch above the battery on the back
of the phone away from the battery
➀ Lift the battery away, as shown
Antenna
➀
➀
Depending on the Auto Antenna menu option (5-7),
the antenna may extend and retract automatically
when you use the phone; see page 104 for further
details.
14
15
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
3. Slide the ivory-coloured lock on the SIM card
holder left to unlock the holder. Lift the holder up.
6. Insert the tabs on the base of the battery into the
notches on the base of the phone, as shown.
4. Insert the SIM card, ensuring that the cut corner
faces top left and the gold contacts of the card
face into the phone.
7. Push the battery against the back of the phone
until it clicks into place. Make sure that the
battery is properly installed before switching on
the power.
5. Close the SIM card holder and slide the ivory-
coloured lock right.
16
17
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Charging a Battery
Your phone is powered by a rechargeable Li-ion
battery. A travel adapter is provided with your phone.
Use only approved batteries and chargers. Ask your
local SAMSUNG dealer for further details.
3. When charging is finished, disconnect the adapter
from the power outlet and from the phone by
pressing the grey tabs on both sides of the
connector and pulling the connector out.
The phone can be used while the battery is charging.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery is fully recharged in approximately
150 minutes.
1. With the battery in position on the phone, connect
the lead from the travel adapter to the bottom of
the phone. Check that the arrow on the lead
connector is facing towards the front of the phone.
Low Battery Indicator
When the battery is weak and only a few minutes of
talk time remain, you will hear a warning tone and a
message will be repeated at regular intervals on the
display:
** Warning **
Battery Low
2. Connect the adapter to a standard AC wall outlet.
When the battery is charging, the battery icon
in the top right-hand corner of the display fills
repeatedly.
Note: Do not remove the battery from the phone
while the travail adapter is connected to the
phone.
When the battery becomes too weak for the phone
to operate, the phone switches off automatically.
18
19
Ge t t in g S t a rt e d
Ge t t in g S t a rt e d
Switching the Phone On/ Off
5. When you wish to switch the phone off, hold down
1. Open the flip cover.
the
key for more than two seconds.
2. Hold down the
key for more than one
second to switch the phone on.
Note: If “Insert SIM Card” appears on the display,
please check that the SIM card is correctly
inserted. The phone requires a 3 V SIM card.
Please contact your service provider if you
experience any problems.
Locking the Keypad
If the keypad lock icon ( ) is displayed, you cannot
use the keypad.
To activate the keypad, hold down the left soft key.
You can access the Menu and Phonebook features
without opening the flip cover.
3. If the phone asks for a password, key in the
password and press the OK soft key. The phone
password is factory set to 0000. For further
details, see page 125.
The keypad is automatically locked if no key is
pressed within a few seconds or you open and close
the flip cover.
4. If the phone asks for a PIN, key in the PIN and
press the OK soft key. For further details, see
page 125.
The phone searches for your network and when it
finds it, the idle screen, illustrated below, is
displayed.
Activating/ Deactivating the Silent Mode
This mode allows you to turn the various tones off
when discretion is required. The phone vibrates
rather than rings and the alarm, keypad, message
and connect tones are muted.
<SERVICE PROVIDER>
Press and hold down the
activating and deactivating the Silent mode.
key to toggle between
Sat 14 Mar 12:57
Menu
PhoneBook
Note: This feature is not available when the phone is
connected to a car kit (optional).
Note: The display language is determined by the
SIM card inserted. To change the language,
use the Language menu option (5-1-3); for
further details, refer to page 83.
20
21
Ca ll Fu n c t io n s
Call Functions
Making a Call
When the idle screen is displayed, key in the area
code and phone number and press the key.
Ending a Call
When you have finished your call, briefly press
Note: If you have set the Auto Redial option (5-1-7) to
ON (see page 85) and the person called does not
answer or is already on the phone, the number
is redialled automatically up to ten times.
the key.
Making a Call from the Phonebook
You can store the names and phone numbers of the
people you call regularly in the SIM card and phone
memory, called the phonebook. You then simply
select the required name to recall the associated
number. For further details on the Phonebook feature,
refer to page 35.
Making International Calls
1. Press and hold down the
key.
The + international prefix appears.
2. Key in the country code, area code and phone
number and press the
key.
You can also quickly dial the numbers stored in SIM
locations 2 to 9, simply by holding down the
corresponding number key.
Correcting the Number
To clear...
Then...
❘
The last digit
displayed
Press
or the soft key.
Using the Voice Dialling Feature
Any other digit
in the number
Push
left or right until the
If you have set the Active Flip option (5-1-0) to
Voice Dial (see page 86), you can also say a name
when you open the flip cover. The number stored
with the name is then automatically dialled. For
further details on the Voice Dialling feature, refer to
page 70.
cursor ( ❘ ) is immediately to the
right of the digit to be cleared.
Press the soft key. You can
also insert a missing digit simply
by pressing the appropriate key.
❘
❘
The whole display Hold down
or the soft
key for more than one second.
22
23
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Redialling the Last Number
Answering or Rejecting a Call
The phone stores the last 10 numbers dialled. To
recall any of these numbers, proceed as follows.
When somebody calls you, the phone rings and the
phone icon in the middle of the screen flashes.
1. To dial the last number called, press the
key
twice. Otherwise, press the
key in idle
mode to access the list of the last numbers
dialled.
2. Push
up or down to scroll through the numbers
n n n n
until the required number is displayed.
Caller’s name or
number (if available)
Accept
Reject
3. Press the
key to dial the number displayed.
If the caller can be identified, the caller’s phone
number (or name if stored in your phonebook) is
displayed. If the caller cannot be identified, only the
phone icon flashes.
Adjusting the Volume
During a call, if you wish to adjust the earpiece
volume, use the volume keys on the left side of the
phone. Press to increase and to decrease the
volume.
Answering a Call
There are three ways to answer a call.
• Press the Accept soft key.
• Open the flip cover.
• Press any key except
or the Reject soft key
(when the Any-Key Answer menu option is set to
ON).
Rejecting a Call
To reject a call, close the flip cover or press the
or Reject soft key.
In idle mode, you can adjust the key tone volume
using the same keys.
24
25
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Viewing Missed Calls
If you are unable to answer a call for any reason, you
can find out who was calling you, provided that this
service is available. In this way, you can call the
person back, if necessary.
4. Change the number as required. Push
in the
appropriate direction to move back through the
number.
5. To...
Then press the...
The number of missed calls is displayed on the idle
screen immediately after the call was missed.
Call the number
Store the number
key.
Save soft key and enter
the name and location
required (for further
To view the missed call immediately, proceed as
follows.
1. If the flip cover is... Then...
details, refer to page 35).
Closed
Open
Open the flip cover.
Deleting a Missed Call
Press the View soft key.
1. Press the Options soft key.
2. Push up or down to highlight the Delete
option.
3. Press the Select soft key.
The number corresponding to the most recent
missed call is displayed, if available.
2. To...
Then...
Scroll through the
missed calls
Push
up or down.
key.
You can press the
key at any time to exit the
Missed Call feature.
Call the number
displayed
Press the
Note: You can access the Missed Call feature at any
time by selecting the Missed Calls menu option
(1-1); for further details, see page 60.
Edit or delete a missed Press the Options
call number soft key (see below).
Sending a Message in Reply
Editing a Missed Call Number
1. Press the Options soft key.
1. Press the Options soft key.
2. Push
option.
up or down to highlight the Text Reply
2. Push
option.
up or down to highlight the Paste
3. Write the message, referring to page 66 for
further details, il necessary.
3. Press the Select soft key.
26
27
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
In-Call Options
Your phone provides a number of control functions
that you can use during a call. To access these
functions during a call, press the Options soft key.
Searching for a Number in the Phonebook
You can search for a number in the phonebook during
a call.
Switching the Microphone Off (Mute)
1. Press the Options soft key.
You can temporarily switch your phone’s microphone
off, so that the other party cannot hear you.
2. Push
option.
up or down to highlight the Phonebook
Example: You wish to say something to another
person in the room but do not want the
other party to hear you.
3. Press the OK soft key.
4. Enter the start of the name that you wish to find
and press the Find soft key.
To switch the microphone off temporarily, proceed as
follows.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
1. Press the Options soft key.
2. Push
option.
up or down to highlight the Mute
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
3. Press the OK soft key.
Your correspondent can no longer hear you.
5. To view the highlighted entry, press the View soft
key.
To switch the microphone back on, proceed as
follows.
For a more detailed description of the Phonebook
search feature, refer to page 40.
1. Press the Options soft key.
2. Push
option.
up or down to highlight the Unmute
3. Press the OK soft key.
Your correspondent can hear you again.
28
29
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Putting a Call on Hold
Answering a Second Call
You can place the current call on hold whenever you
want. You can make another call while you have a
call in progress if this service is supported by the
network. Of these two calls, one is active and the
other is on hold and you can swap between the calls.
You can answer an incoming call while you have a
call in progress, if this service is supported by the
network and you have set the Call Waiting menu
option (5-2-3) to Active (see page 93). You will be
notified of an incoming call by a call waiting tone.
To place a call on hold, press the Options soft key,
and select the Hold option. You can reactivate the
call whenever you want, by pressing the Retrieve
soft key.
To answer a call while you have a call in progress,
proceed as follows.
1. Press the
key to answer the incoming call.
The first call is automatically put on hold.
To make a call while you have a call in progress,
proceed as follows.
2. To switch between the two calls, press the Swap
1. Key in the phone number that you wish to dial or
look it up in the phonebook.
soft key.
To end a held call, press the Options soft key and
select the End held call option.
2. Press the
key to dial the second call.
The first call is automatically put on hold.
3. To end the current call, press the
key.
Or alternatively, proceed as follows.
You are automatically switched back to any held
calls.
1. Put the current call on hold by pressing the
Options soft key and selecting the Hold option.
2. Make the second call in the normal way.
To swap between the two calls, simply press the
Swap soft key.
The current call is placed on hold and the call on
hold is reactivated so that you can continue
conversing with the other party.
When you have finished, end each call normally by
pressing the
key.
30
31
Ca ll Fu n c t io n s
Ca ll Fu n c t io n s
Making a Multiparty Call
2. Highlight the required person, by pushing
up
A multiparty call is a network service that allows
up to six people to take part simultaneously in a
multiparty or conference call. For more information,
contact your service provider.
or down and then pressing the
key.
3. Select Private.
Now you can talk privately with that person. The
other participants can continue to converse with
each other.
Setting Up the Multiparty Call
1. Call the first participant in the normal way.
4. To return to the multiparty call, press the Options
soft key and select Join.
2. Call the second participant in the normal way.
The first call is automatically put on hold.
All the multiparty call participants can now hear
each other.
3. To join the first participant to the multiparty call,
press the Options soft key and select the Join
option.
Dropping One Participant
1. Press the Options soft key and choose the
Select one option.
4. To add a new person to the multiparty call, call
the person in the normal way, then press the
Options soft key and select the Join option.
The list of call participants appears.
2. Highlight the required person, by pushing
up
You can add incoming callers by answering the call
and pressing Options, followed by Join. Repeat as
required.
or down and then pressing the
key.
3. Select Remove.
The call is ended with that participant, but you
can continue to talk with the other participants.
Having a Private Conversation With One
Participant
4. End the multiparty call by closing the flip cover or
1. Press the Options soft key and choose the
Select one option.
pressing the
key
.
The list of call participants appears.
32
33
Ca ll Fu n c t io n s
Phonebook
Muting/ Sending Key Tones
You can store phone numbers and their corresponding
names in the memory of your SIM card. The memory
capacity depends on your SIM card. In addition, you
can store up to 250 numbers and names in the phone
memory. The SIM card and phone memories, although
physically separate, are used as if they were a single
entity, called the phonebook.
These options allow you to turn the key tones off or
on.
If the Mute keys option is selected, your phone
does not transmit the key tones.
Note: To communicate with answering machines or
computerised telephony systems, the Send
keys option must be selected.
Storing a Phone Number with a Name
Using the SMS Service
As soon as you start to enter a number, Save appears
above the left soft key to allow you to store the
number in the phonebook.
If you receive an SMS (Short Message Service)
message during a call, the message icon (
flashes in the display.
)
1. Key in the number to be stored.
Notes:
After you have finished your call, you can read the
message; refer to page 63 for further details.
• If you make a mistake while entering a number,
correct it using
❘
or the
soft key. For
further details, refer to page 22.
• To insert a dialling pause for special phone
services, such as banking by phone, hold down
the
key. ‘P’ is displayed to indicate the
pause.
2. When you are sure that the number is correct,
press the Save soft key.
3. Enter the corresponding name (the maximum
length depends on your SIM card). For information
on how to enter a name, see page 42.
4. When you are satisfied, press the Save soft key.
The phone now displays the first free location in
the last memory used to save a number and
name. If that memory is full, the first free location
in the other memory is displayed.
34
35
P h o n e b o o k
P h o n e b o o k
5. Press the right soft key to toggle between the
2. To...
Select the
Then...
Press the Select soft key.
phone (To Phone) and card (To Card) memories.
highlighted option
6. If you do not want to save the number and name
in the suggested location, press the
clear the location number and enter your
preferred location by pressing the number keys.
key to
Highlight a
different option
Push
up or down one or
more times until the required
option is highlighted.
7. Press the OK soft key to store the name and
number.
Call
You can access the phonebook options, by
pressing the Options soft key, or scroll through
This option dials the selected number.
the memory by pushing
up or down.
8. To return to the idle screen, press the
.
Text Reply
key
This option allows you to send a text message to the
selected number.
Phonebook Options
Enter the message and press the OK soft key. For
further information on how to enter text, see page 42.
When storing or viewing a number in the phonebook,
Options appears above the left soft key to allow you
to access the phonebook options, described in the
following paragraphs.
Voice Record
Note: This option only appears if no name has as yet
Accessing the Options
been recorded.
To access the various phonebook options, proceed as
follows.
This option allows you to add a voice tag to the
number.
Follow the instructions given by your phone to record
the required name.
1. Press the Options soft key.
The first available option is highlighted.
36
37
P h o n e b o o k
P h o n e b o o k
Play Voice
Erase
Note: This option only appears when you have
This option allows you to erase a number and name
stored in the phonebook.
already recorded a name.
You are asked to confirm that you wish to erase the
name and number from the phonebook by pressing
the Yes soft key.
This option plays back the names that you have
recorded.
Voice Delete
Copy
Note: This option only appears when you have
already recorded a name.
This option allows you to copy a phonebook number
to another location. Use this option to store a number
similar to one already in memory; once copied, edit
the number and store it in the phonebook.
This option allows you to delete a specific voice tag.
You are asked to confirm the deletion by pressing the
OK soft key.
Memory Status
Paste
This option allows you to check how many names and
phone numbers are stored and how many locations
are still free in the card memory and phone memory.
This option allows you to paste the phonebook
number into the normal dialling mode. Use this option
to dial a number similar to one in the phonebook
(a different extension in the same office for example).
➝
Alert
Use the soft key or
to change the number
as required (refer to page 22 for further details).
This option allows you to assign a specific ring tone
to a number and thus distinguish the caller by the
ring tone. Specific ring tones can be assigned to up
to five numbers.
When you are ready to dial, press the
key.
Edit
This option allows you to edit a number and name
stored in the phonebook.
38
39
P h o n e b o o k
P h o n e b o o k
Searching for and Dialling a Number in
the Phonebook
5. To...
View the
Then...
Press the View soft key.
highlighted entry
1. When the idle screen is displayed, press the
Select a
different entry
Push
up or down one or
PhoneBook soft key.
more times until the required
entry is highlighted.
2. If your SIM card provides Service Dialling Number
(SDN) and Information Number services, you will
see the following screen.
Look for a name
starting with a
different letter
Press the key labelled with
the required letter.
Phonebook
Find Entry
6. Once you have found the required entry, press
the key to dial the number.
2
3
Service Dir.
Information
>>
If the menu name is too
long for the display, it is
scrolled when high-
lighted.
OK
Dialling a Number Using the Service
Directory or Information Numbers
Note: The Service Dir. and Information Numbers
options may not be available, depending on
your SIM card.
3. Select Find Entry by pushing
up or down, if
necessary and press the OK soft key.
4. Enter the start of the name that you wish to find
When the idle screen is displayed, press the
PhoneBook soft key. You will see the screen
illustrated on page 40.
and press the Find soft key.
Note: You can also scroll through the phonebook
from the beginning, by pressing the Find
soft key directly.
• Service Dir.: enables you to view the Service
Directory and make calls from it.
The phonebook entries are listed, starting with
the first entry matching your input. This entry is
also highlighted.
• Information Numbers: enables you to see the
Information Numbers in a tree structure and make
a call.
40
41
En t e rin g Te xt
Entering Text
When using your phone, you will often need to enter
text. For example, when storing a name in the
phonebook, creating your personal greeting or
scheduling events in your calendar. You can enter
alphanumeric characters by using your phone’s keypad.
Changing the Text Input Mode
1. When you are in a field that allows characters to
be entered, you will notice the text input mode
indicator in the lower right corner of the display.
You are provided with the following text input
modes.
Enter Name
T9 mode
This mode allows you to enter words with only one
keystroke per letter. Each key on the keypad has
more than one letter – when you press the
once, J, K or L may be displayed. The T9 mode
automatically compares your keystrokes with an
internal linguistic dictionary to determine the correct
word, thus requiring far fewer keystrokes than the
traditional ABC mode.
key
Save
ABC
Text input mode
indicator:
ABC: ABC mode
NUM: Number mode
: T9 mode
SYM: Symbolic mode
ABC mode
2. Press the right soft key.
The modes available are displayed.
This mode allows you to enter letters by pressing the
key labelled with the required letter once, twice or
three times until the letter is displayed.
3. Scroll to the required mode, then press the Select
soft key.
Number mode
This mode allows you to enter numbers.
Symbolic mode
This mode allows you to enter special characters.
is a registered trademark of Tegic Communications, Inc.
42
43
En t e rin g Te xt
En t e rin g Te xt
Using the T9 Mode
The T9 predictive text input mode allows you to key
in any character using single keystrokes. This text
input is based on a built-in dictionary.
To type words not found in the T9 mode, change the
text input mode to the traditional ABC mode.
You can move the cursor by pushing
To delete letters, press the key. Press and hold
to erase entire words.
left or right.
1. When you are in the T9 predictive text input mode,
down
start entering a word by pressing keys
to
. Press each key only once for one letter.
There are three shift options:
• Lower Case (no shift indicator)
• Initial Capitals ( indicator)
• Caps Lock ( indicator)
Example: to enter HELLO in the T9 mode, press
,
,
,
and
.
The word you are typing appears in the display. It
may change with each key that you press.
Press
one or more times to display the appro-
priate shift indicator and continue typing normally.
2. Enter the whole word before editing or deleting
any keystrokes.
Enter Name
David
3. If the word is correct, start entering the next word.
Otherwise, press
repeatedly to display
alternate word choices for the keys that you have
pressed.
Save
ENG
Example: OF and ME both share the sequence
Shift indicator
,
. The phone displays the
most commonly used choice first.
Note: To exit the text input mode without saving your
input, press . The phone returns to the
previous menu level.
4. Complete each word with a space by pressing
the
key.
44
45
En t e rin g Te xt
En t e rin g Te xt
Using the ABC Mode
Use the
to
keys to enter your text.
Key
Characters in the Order Displayed
Upper Case
Lower Case
1. Press the key labelled with the required letter:
• Once for the first letter
• Twice for the second letter
• And so on
.
,
? ! 1 -
‘
@:
1
2
3
4
5
6
7
8
9
0
:
;
¿ ¡ 1 = “ /
a b c 2 à ä æ å Ç
d e f 3 é è
A B C 2 Ä Æ Å Γ
D E F 3 É ∆
G H I 4 Θ
g h i 4 ì
Note: To display a list of special characters, press
. See the table on page 47 for more
information on the characters available using
the keys.
j
k l
5
J K L 5 Λ
m n o 6 ñ ò ö ø
p q r s 7 ß
M N O 6 Ñ Ö Ø Ξ
P Q R S 7 Π Σ
T U V 8 Ü Φ
WX Y Z 9 Ψ Ω
0 * < > % # £
t
u v 8 ù ü
w x y z 9
0 + ( & _ $
2. Select the other letters in the same way.
)
Note: The cursor moves to the right when you
press a different key. When entering the
same letter twice (or a different letter on the
same key), just wait for a few seconds for
the cursor to move right automatically, and
then select the next letter.
There are three shift options:
• Lower Case (no shift indicator)
• Initial Cap ( indicator)
• Caps Lock ( indicator)
Press the
key one or more times to display the
appropriate shift indicator in the bottom line of the
display and continue typing normally.
To insert a space, press the
key.
You can move the cursor by pushing
left or right.
To delete letters, press the key. Press and hold
down the key to clear the display.
46
47
En t e rin g Te xt
Selecting Functions
and Options
Using the Number Mode
The Number mode enables you to enter numbers in a
text message (a telephone number for example).
Press the keys corresponding to the required digits
before manually switching back to the appropriate
text entry mode.
Your phone offers a set of functions that allow
you to customise your phone. These functions are
arranged in menus and sub-menus, accessed via the
two soft keys (
). Each menu and sub-menu
allows you to view and alter the settings of a
particular function.
Using the Symbolic Mode
The roles of the soft keys vary according to the
current context; the label on the bottom line of the
display just above each key indicates its current role.
The Symbolic mode enables you to enter various
symbols.
Example:
Enter Name
1 2 3 4 5 6 7 8 9
. (
)
,
:
;% !
<SERVICE PROVIDER>
Find
SYM
Sat 14 Mar 12:57
Menu
PhoneBook
To scroll through the symbols available, push
up
or down. Press the number key corresponding to the
required symbol. The phone automatically switches
back to the text entry mode used immediately prior
to selecting the Symbolic mode.
Note: To enter a new line character in a text
Press the left soft key
to access the menu
feature.
Press the right soft
key to access the
Phonebook feature.
message, press the
mode.
key in the Symbolic
48
49
S e le c t in g Fu n c t io n s a n d Op t io n s
S e le c t in g Fu n c t io n s a n d Op t io n s
Example: Selecting an Alert Type
To view the various functions/options available and
select the one required, proceed as follows.
1. When the idle screen is displayed, press the
Menu soft key to enter the menu facility.
1. Press the appropriate soft key.
<SERVICE PROVIDER>
2. To...
Then...
Select the:
Press the left soft key.
• Function displayed
or
Sat 14 Mar 12:57
• Option highlighted
Menu
PhoneBook
View the next function
or highlight the next
option in a list
Push
Push
down.
up.
2. Scroll through the menus until you reach the
Tones menu, by pushing
in the appropriate
direction.
Move back to the
previous function
or option in a list
Move back up one
level in the structure
Press the right soft
key.
4
Tones
Select
Exit the structure
without changing
the settings
Press the
key.
3. To select the Tones menu, press the Select soft
key or the key.
In some functions, you may be asked for a password
or PIN. Enter the required code and press
.
Tones
Note: When you access a list of options, your phone
highlights the current option. If, however, there
are only two options, such as On/Off or
Enable/Disable, your phone highlights the
option that is not currently active, so that you
can select it directly.
Ring Tone
Tone 1
2
3
4
Melody Composer
Ring Volume
Alert Type
Select
50
51
S e le c t in g Fu n c t io n s a n d Op t io n s
Using the Menus
4. Scroll through the menus until you reach the
The phone offers a range of functions that allow you
to tailor the phone to your needs. These functions
are arranged in menus and sub-menus.
Alert Type menu by pushing
up or down.
5. Select the Alert Type menu by pressing the
Select soft key or the key.
The current setting is highlighted.
The menus and sub-menus can be accessed by
scrolling, entering the shortcut number or by pressing
a shortcut key.
Alert Type
Accessing Menu Functions by Scrolling
1 Light only
Current setting
Melody
1. In idle mode, press the Menu soft key to access
3 Vibration
4 Vibra+Melody
the menu facility. Push
up or down to reach
the required main menu, such as Tones. Press the
Select soft key to enter the menu.
Select
2. If the menu contains any sub-menus, Ring Tone
for example, you can access them by pushing
up or down and pressing the Select soft key.
6. Scroll through the list of options until the
appropriate one is highlighted, by pushing
or down.
up
If the menu you have selected contains further
options, repeat the same procedure.
7. Press the Select soft key to confirm your
3. To...
Scroll through the menus
Then...
selection.
Push
down.
up or
8. Press the
key to exit the menu structure.
Confirm the chosen setting Press the Select
soft key.
Return to the previous
menu level
Press
or the
soft key.
Exit the menu, without
changing the settings
Press the
key.
52
53
Us in g t h e Me n u s
Us in g t h e Me n u s
Accessing Menu Functions by Using
Shortcut Numbers
Menu Map
The following illustration shows the menu structure
available and indicates the:
• Number assigned to each option
• Page on which you can find a description of each
feature
The menu items (menu, sub-menus and options) are
numbered and can be accessed quickly by using their
shortcut number. This number is shown in the
bottom-right next to the
soft key on the display.
1. In idle mode, press the Menu soft key to access
the menu facility.
Note: You can see menu 0, if your SIM card supports
the SIM Application Toolkit. This is a network
feature. Please contact your service provider
for more information.
2. Within three seconds, key in the first digit of the
shortcut number. Repeat this for each digit of the
shortcut number.
1. Call Records
1-1 Missed Calls
Example: setting the Any-key Answer function
Page 60
1-2 Received Calls
1-3 Dialled Calls
1-4 Call Time
Press the Menu soft key, and key in
,
,
,
.
1-4-1 Last Call Time
1-4-2 Total Sent
Menu to enter the menu, 5 for Settings, 1 for
Phone, 4 for Any-key Answer and 2 to set the
Any-key Answer option to ON.
1-4-3 Total Received
1-4-4 Reset Timers
1-5 Call Cost1
Note: The numbers assigned to each menu option are
indicated in the list on page 55. They may not
match the number on the phone. It depends on
the services supported by the SIM card.
1-5-1 Last Call Cost
1-5-2 Total Cost
1-5-3 Max Cost
1-5-4 Reset Counters
1-5-5 Set Max Cost
1-5-6 Price/Unit
Accessing Menu Functions by Using
Shortcut Keys
Page 63
2. Messages
In the idle mode, some menu options can be
accessed directly by pressing shortcut keys.
2-1 Voice Mail
2-1-1 Connect to Voice Mail
2-1-2 Voice Server Number
For further details on this feature, refer to the Quick
Menu option (5-5) on page 102.
1 Shown only if supported by your SIM card.
54
55
Us in g t h e Me n u s
Us in g t h e Me n u s
Page 76
2. Messages(continued)
2-2 Read Messages
2-3 Write Messages
2-4 Preset Message List
2-5 Setup
4. Tones
4-1 Ring Tone
4-2 Melody Composer
4-3 Ring Volume
4-4 Alert Type
2-5-1 Service Centre
2-5-2 Default Type
2-5-3 Default Validity
2-5-4 Reply Path
2-5-5 Delivery Reports
2-6 Broadcast
4-5 Keypad Tone
4-6 Message Tone
4-7 Error Tone
4-8 Minute Minder
4-9 Connect Tone
2-6-1 Read
2-6-2 Receive
2-6-3 Channel List
2-6-4 Language
5. Settings
Page 82
5-1 Phone
5-1-1 Greeting Message
5-1-2 Own Number1
5-1-3 Language
2-7 Chatting
5-1-3-1 Text Language
5-1-3-2 Voice Language
5-1-3-3 Input Mode
Page 70
3. Voice Functions
3-1 Voice Dial
3-1-1 Record
3-1-2 Act
3-1-3 Delete One
3-1-4 Play All
5-1-4 Any-key Answer
5-1-5 Backlight
5-1-6 Service Light
5-1-7 Auto Redial
5-1-8 Auto Answer
5-1-9 Caller ID
5-1-0 Active Flip
5-1-* Reset Settings
5-1-# Active Line1
3-1-5 Delete All
3-2 Voice Command
3-2-1 Record
3-2-2 Act
3-2-3 Play All
3-2-4 Delete All
3-3 Voice Memo
3-3-1 Record
5-2 Network Services
5-2-1 Call Diverting2
5-2-2 Call Barring2
3-3-2 Replay
5-2-3 Call Waiting2
3-3-3 Delete One
3-3-4 Delete All
3-4 AnswerPhone
3-4-1 AnswerPhone
3-4-2 Message Record
3-4-3 Message Select
5-2-4 Network Selection
5-2-5 Line Identification2
5-2-6 Closed User Group
1 Shown only if supported by your SIM card.
2 May not be shown or supported by your network service provider.
56
57
Us in g t h e Me n u s
Us in g t h e Me n u s
5. Settings (continued)
7. Games
Page 114
5-3 Security
5-3-1 PIN Check
Using this menu you can enjoy
popular games with the phone.
5-3-2 Change PIN
5-3-3 Phone Lock
5-3-4 Change Password
5-3-5 SIM Lock
5-3-6 FDN Mode1
5-3-7 Change PIN21
Page 115
8. WWW Services
5-4 LCD
5-4-1 Screen Mode
5-4-2 Select Image
5-4-3 LCD Contrast
5-4-4 Select IDLE
5-4-5 Select Clock
The WAP Browser feature may vary,
depending on the service provider.
5-5 Quick Menu
5-5-1 UP
5-5-2 DOWN
5-5-3 RIGHT
5-5-4 LEFT
5-6 Browser2
5-6-1 Proxy Settings
5-6-2 Current Proxy
5-7 Auto Antenna
6. Organiser
Page 105
6-1 Scheduler
6-2 Alarm
6-3 Calculator
6-4 To Do List
6-5 Calendar
6-6 World Time
6-7 Clock
6-7-1 Set Time
1 Shown only if supported by your SIM card.
6-7-2 Set Date
6-7-3 Format
2 May not be shown or supported by your network service provider.
58
59
Ca ll Re c o rd s
Call Records
Via this menu, you can view the phone calls:
Dialled Calls
Menu 1-3
• Missed
• Received
• Dialled
This option lets you view the last 10 numbers dialled.
You can also:
• Edit the number and save it in the phonebook
• Redial the number
• Delete the number from the list
• Send a text message
The number and name (if available) are displayed,
together with the date and time at which the call
was made. You can also view call times and costs.
Missed Calls
Menu 1-1
Call Time
Menu 1-4
This option lets you view the last 10 unanswered
calls. You can also:
• Edit the number if available and dial it or save it
in the phonebook
This option lets you view the timers for calls made
and received. The following timers are available.
Last Call Time: length of the last call.
• Delete the call from the list
Total Sent: total length of all calls made since the
• Reply by sending a text message
timer was last reset.
Total Received: total length of all calls received
since the timer was last reset.
Received Calls
Menu 1-2
Reset Timers: option used to reset the call timers;
you must first enter the phone password (see
page 125) and then press the OK soft key.
This option lets you view the last 10 phone calls
received. You can also:
• Edit the number if available and dial it or save it
in the phonebook
• Delete the call from the list
• Reply by sending a text message
Note: The actual time invoiced for calls by your
service provider may vary, depending on
network features, rounding-off for billing
purposes and so forth.
60
61
Ca ll Re c o rd s
Messages
*
Call Cost
Menu 1-5
Your phone receives voice mail notification messages,
and text messages. Voice mail and the Short
Note: The options of this menu may vary, depending
on your SIM card.
Message Service (SMS) are network services. Please
contact your service provider for more information.
This network feature lets you view the cost of calls.
The following options are available.
When the
icon appears, you have received new
icon appears, you
text messages. When the
Last Call Cost: cost of the last call made.
have received voice mail. If the message memory is
full, an error message is displayed and you cannot
receive any new messages. Use the Delete option in
the Read Messages menu (2-2) to delete obsolete
messages.
Total Cost: total cost of all calls made since the cost
counter was last reset. If the total cost exceeds the
maximum cost set via the Set Max Cost option, you
can no longer make any calls, except calls to the
emergency services, until you reset the counter.
Voice Mail
Menu 2-1
Max Cost: maximum cost set via the Set Max
Cost option (see below).
This menu provides you with a quick way of
accessing your voice mailbox (if provided by your
network).
Reset Counters: option used to reset the cost
counter; you must first enter your PIN2 (see
page 126) and then press the OK soft key.
Connect to Voice Mail
Set Max Cost: option used to enter the maximum
cost that you authorise for your calls.
Before using this feature, you must enter the voice
server number obtained from your service provider
(see the following page). You can then select this
option and simply press the OK soft key to listen to
your messages.
Price/Unit: option used to set the cost of one unit;
this price per unit is applied when calculating the
cost of your calls.
Note: In idle mode, you can access your voice mail
server directly by holding down the
key.
* Shown only if supported by your SIM card.
62
63
Me s s a g e s
Me s s a g e s
Text Reply: allows you to reply by sending a text
message. You can also:
• Send the message
Voice Server Number
You can change the voice mail server number.
• Save and send the message
• Save but not send the message
To...
Then...
Enter the server
number
Press the corresponding
number keys.
Call back: allows you to call the sender back.
Edit: allows you to edit a message.
Recall a number in
the phonebook
Press the PhoneBook
soft key.
Delete: allows you to delete obsolete messages.
Correct a digit
Press
Push
.
Cut Number: allows you to extract a number from
the message text, so that you can call the number or
save it in the phonebook.
Move the cursor to the
left/right without
clearing the digit
up or down.
Send: allows you to send a message that you have
not already sent.
Note: See page 35 for further information on how to
use the phonebook.
Send again: allows you to resend a message that
you have already sent.
Read Messages
Menu 2-2
Chatting: allows you to chat with a person by
sending SMS messages. See page 69 for further
information on how to use the Chatting feature.
When the Read Messages menu is selected, the
most recent message is displayed:
• Message number
• Sender’s phone number (if sent with the message)
or name if it is available in your phonebook
• Message status (new, old, not sent, sent)
• Date and time at which the message was
received
Note: The options available vary, depending on the
message status (new, old, not sent, sent).
Write Messages
Menu 2-3
Via this menu, you can write and edit text messages
of up to 160 characters.
• Message text
1. Key in a message. For further information on how
to enter text, see page 42.
To scroll through the messages, push
right, as required. You can choose the following
left or
options, by pressing the Options soft key.
64
65
Me s s a g e s
Me s s a g e s
2. After you complete the message, you can select
the following options.
The following options are available.
Edit: allows you to write a new message or edit the
Send Only: allows you to send the message
immediately. You can enter the required
destination.
selected preset message.
Note: For further information on how to enter text in
your message, refer to page 42.
Save and Send: allows you to save a copy of the
message and then send the message to the
required destination. You can read the message
using the Read Messages option. When you
read the message, ‘Sent’ is displayed to indicate
the message state.
Send Message: allows you to recall the selected
preset message. Once you have completed the
message, you can send, save and send, or simply save
it.
Delete: allows you to delete the selected preset
message.
Save Only: allows you to save the message so
that it can be sent later. When you read the
message, ‘Not sent’ is displayed.
Setup
Menu 2-5
3. After selecting the required option, press the
Select soft key.
The display prompts you to enter the destination
number.
Via this menu, you can set up default SMS
information.
Service Centre: allows you to store or change the
number of your SMS centre required when sending
text messages. You must obtain this number from
your service provider.
4. Enter the phone number and press the OK soft key.
Preset Message List
Menu 2-4
Default Type: allows you to set the default message
type (Text, Voice, Fax, X.400, Email, and ERMES). The
network can convert the messages into the selected
format.
Using this menu, you can preset up to five messages
that you use most frequently. This menu shows the
preset message list. Scroll through the list by
pushing
in the appropriate direction. When the
Default Validity: allows you to set the length of
time for which your text messages will be stored at
the SMS centre while attempts are made to deliver
them to you.
required message number appears, press the
Options soft key.
66
67
Me s s a g e s
Me s s a g e s
Possible values are one hour, 6 hours, 24 hours, one
week and the maximum authorised by your service
provider.
Receive: allows you to enable or disable the
reception of broadcast messages.
Channel List: lists all available channels. The
channels currently selected are indicated by an
Reply Path: allows the recipient of your SMS
message to send you a reply via your message
centre, if the service is provided by the network.
asterisk ( ) beside the name. When you select one of
*
them, you can edit, enable (or disable) or delete the
channel.
The Enter Channel option allows you to add a new
channel to the channel list. Enter the appropriate
channel ID obtained from your service provider, and a
title for the channel.
Delivery Reports: allows you to activate or
deactivate the report function. When this function is
activated, the network informs you whether or not
your message has been delivered.
Language: allows you to select your preferred
language to be used when displaying cell broadcast
messages.
Broadcast
Menu 2-6
This network service allows you to receive text
messages on various topics, such as the weather or
traffic. Messages are displayed immediately they are
received, provided that:
Chatting
Menu 2-7
With this menu, you can use the SMS (Short
Message Service) feature to chat with other people.
•
•
•
The phone is in the idle mode
The Receive option is set to Enable
The message channel is currently active in the
channel list
1. Enter your ID of up to 8 characters and press the
OK soft key.
Note: You cannot change your ID during a chat
session.
If the message is long, push
more times.
up or down one or
2. Enter the phone number of the person with whom
you wish to chat or press the PhoneBook soft
key to use your phonebook.
The last five messages are also stored for later
retrieval. Please contact your service provider for
more information.
3. Write a message of up to 150 characters and
press the OK soft key.
The following options are available.
If it is sent successfully, the chatting screen is
displayed.
Read: lets you view the first message. Scroll through
the message by pushing
up or down. At the end
of the message, press the Next soft key or push
right to move to the next message.
4. To exit the chatting screen, press the
key.
69
68
Vo ic e Fu n c t io n s
Voice Functions
Record
You can use the voice functions to customise the
following features:
This option allows you to record voice tags and
assign them to the appropriate numbers.
• Voice dialling
• Voice commands
• Voice memos
• Answerphone
Say the name that you wish to use for voice dialling
after you hear a voice prompt. For best results, use
names with at least two syllables, or use both a first
and last name. The phone stores the name as the
first sample, and then prompts you to say the name
again.
Voice Dial
Menu 3-1
Respond to the prompt by repeating the name. The
phone stores the name as the second sample and
then requests the phone number.
The Voice Dialling feature allows you to make phone
calls by saying a voice tag that has been assigned to a
name and phone number. Any spoken word, a name for
example, can be a voice tag.
To store the number, press the OK soft key. Follow
the instructions described on page 35 to store the
number into your phonebook.
Before using the Voice Dialling feature, note that:
• Voice tags are not dependent on the speaker’s
language but on his/her voice
• Voice tags are sensitive to any background noise;
record them and make calls in a quiet environment
• When recording a voice tag or making a call, hold
the phone in the normal position close to your ear
• The maximum length of a voice tag is about
1.5 seconds, but very short names are not accepted
• You can store up to twenty voice tags in the
phone’s memory
Act
This option activates voice dialling.
You hear a voice prompt and Say Name is
displayed. Say the voice tag clearly. If no match for
the voice tag is found or recognised, the phone may
ask you to try again. Otherwise, the phone automa-
tically dials the number of the recognised voice tag.
• The phone must be in a service area with adequate
cellular signal strength
Note: This option only appears when you have
already recorded at least one voice tag.
70
71
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
Voice Command
Menu 3-2
Delete One
This option allows you to delete an individual voice
tag. The corresponding phone number remains in the
phonebook but the voice tag is deleted.
This menu allows you to access frequently used
menus quickly by saying your own voice command.
You can select the following options.
If the name displayed is... Then...
Record: depending on the SIM card, the 20 most
frequently used menu functions can be assigned
voice commands. The menus are set by default to
OFF, indicating that no voice command has been
recorded. When voice commands have been
successfully recorded, the menus are changed to ON
in the display.
To be deleted
Press the OK soft key.
Push up or down.
The next name is
displayed.
Not to be deleted
To exit the Delete One option, press the
key.
Act: activates the voice command. Use this menu to
access the menu by saying the recorded voice
command.
Play All
This option allows you to play back all recorded voice
tags.
Play All: plays all voice commands recorded.
Delete All
Delete All: deletes all voice commands recorded.
This option allows you to delete all voice tags. The
corresponding phone numbers remain in the
phonebook but the voice tags are all deleted. When
the message “Delete All Confirm?” is displayed,
press OK to confirm the deletion.
Voice Memo
Menu 3-3
You can use the Voice Memo feature to:
• Record up to three voice memos
• Play the recorded voice memos
• Delete one or all voice memos
Otherwise, press the Cancel soft key to exit the
function without deleting the voice tags.
72
73
Vo ic e Fu n c t io n s
Vo ic e Fu n c t io n s
AnswerPhone
Menu 3-4
Record: this option allows you to record a memo.
The screen displays the:
You can set your phone to answer calls and play a
recorded message.
• Memo location
• Date and time when the memo was recorded
• Recording time counter
You can use the message to inform callers of your
current situation and to guide them to leave
messages in your voice mail.
The maximum recording time is about 35 seconds.
If you wish to record for longer, press the Continue
soft key. Split appears instead of Continue. You can
continue recording and the rest of the memo is
stored in the next memo location.
While the message is being played, you can, if you
so wish, take the call by pressing the Accept soft
key.
The following options are available.
To stop recording, press the Stop soft key.
Note: If all memo locations are full, you must delete
AnswerPhone: allows you to turn the answerphone
feature on and off. When the answerphone is on,
an old memo before recording a new one.
the
icon appears on the last line of the display.
Replay: this option allows you to play back all
memos recorded, starting with the most recent
memo. The screen displays the:
• Memo location
• Date and time when the memo was recorded
Message Record: you can record for up to
35 seconds. To stop recording before the time is up,
press the Stop soft key. To change the message, use
the Delete option and then record a new message.
To exit without recording, press the Exit soft key.
To skip to the next memo, press the Skip soft key.
To stop the playback, press the Stop soft key.
Message Select: the phone provides two default
messages and allows you to record your own
personal message (see the previous option). You can
select User Message only when you have recorded
your own message.
Delete One: this option allows you to delete a
specific memo. All memos recorded are played back,
starting with the most recent one.
Delete All: this option allows you to delete all
memos. Press the OK soft key to confirm.
74
75
To n e s
Tones
Composing a Melody
You can use the Tones menu to customise various
sound settings, such as the:
• Ringing tone or melody, volume and type
• Sounds made when you press a key, make an
error or receive a message
You can compose three melodies.
1. When you access the menu, the names of any
melodies created are displayed. Otherwise,
(Empty) appears. Select the melody that you wish
to create or edit.
2. Press the Select soft key and compose your
melody using the following keys.
Ring Tone
Menu 4-1
To...
Then...
Enter C, the first note
in the musical scale (do)
Press the
key.
This option allows you to select the required ringing
tone. You can choose between 47 different tones.
Each time you select a tone, it is played for a few
seconds. Three additional options correspond to the
melodies that you can compose, using the Melody
Composer menu option (4-2).
Enter D (re)
Enter E (mi)
Press the
Press the
key.
key.
Enter F (fa)
Press the
Press the
key.
key.
Enter G (soh)
If your SIM card supports the ALS feature, this option
also allows you to select a different ringing tone for
each line, and thus distinguish incoming calls.
Enter A (la)
Enter B (si)
Press the
Press the
Press the
key.
key.
key.
Move a note up or
down one octave
Melody Composer
Menu 4-2
Enter a rest
Press the
key
(press the key until the
rest is of the required
length).
This option allows you to compose your own melody
to be used as the ringing tone.
Delete notes
Press the
key.
• Three octaves are available.
Move a note a
semitone up or down
Push
up or down
• A maximum of 100 notes can be entered.
• You can adjust the length of the notes and add
rests, as required.
(for example, the note A
changes to A#, B, C, C#,
and so on in the scale
each time you push
up).
76
77
To n e s
To n e s
Ring Volume
Menu 4-3
To...
Then...
Change the length
of a note
Press the
length will be changed
each time you press the
key (the
This option allows you to adjust the ringing volume
to one of seven levels.
Use the volume keys on the left side of the phone or
key)
.
push
in the appropriate direction. The greater
Listen to your melody Press the Listen soft
the number of bars, the greater the volume.
key.
Cancel your changes
Press the
key.
Alert Type
Menu 4-4
3. When you are satisfied with your melody, press
the Yes soft key.
This option allows you to indicate how you are to be
informed of any incoming calls. The following options
are available.
4. Enter a title for the melody.
Note: For further details on how to enter
characters, refer to page 42.
Light only: only the backlight is switched on; the
phone neither rings nor vibrates.
You are asked if the melody is to become the
ringing tone.
Melody: the phone rings using the ringing tone
selected via the Ring Tone menu option (4-1).
5. To use the melody as the ringing tone, press the
Yes soft key.
The melody is saved and is played each time your
phone rings. You can also select the melodies
composed, via the Ring Tone menu option (4-1).
Vibration: the phone vibrates but does not ring.
Vibra+Melody: the phone both rings and vibrates.
Note: In idle mode, you can set the phone to vibrate
only (silent mode) or to start ringing again,
Deleting a Melody
simply by holding down the
key.
1. Select the melody that you wish to delete.
If you are using a car kit or have activated the
Silent mode, you cannot select the alert type.
2. Press and hold the
All notes are erased.
key for a few seconds.
3. Press the Listen soft key.
You are asked to confirm that you wish to delete
the melody by pressing the Yes soft key.
78
79
To n e s
To n e s
Keypad Tone
Menu 4-5
Error Tone
Menu 4-7
This option allows you to select the tone that the
keypad generates when you press a key.
This option allows you to select how the phone
informs you that you have made a mistake.
The following options are available.
The following options are available.
OFF: the phone does not beep.
OFF: the keys do not make any sound.
ON: the phone beeps to indicate an invalid entry.
Tone: each key, when pressed, makes a different
sound.
Beep: each key, when pressed, makes the same
sound.
Minute Minder
Menu 4-8
This option allows you to specify whether the phone
must beep every minute during an outgoing call to
keep you informed of the length of your call.
Message Tone
Menu 4-6
This option allows you to select how the phone
informs you that a new message has been received.
The following options are available.
OFF: the phone does not beep.
The following options are available.
ON: the phone beeps every minute.
SMS Tone1 ~ SMS Tone10: the phone uses an
SMS tone. You are provided with ten SMS tones.
Light Only: the service light on the top of the phone
flashes.
Connect Tone
Menu 4-9
You can set your phone to beep when the person you
are calling answers the phone.
Single Beep: the phone beeps once.
The following options are available.
OFF: the phone does not beep.
ON: the phone beeps when your call is accepted.
80
81
S e t t in g s
Settings
Many different features of your phone can be
customised to suit your preferences. All of these
features are accessed via the Settings menu.
Own Number
Note: The contents of this menu may vary,
depending on the SIM card.
You can enter your own name and number using this
menu. If you have subscribed to the Alternate Line
Phone
Menu 5-1
Service, you can select a line by pushing
down.
up or
Greeting Message
The following options are available.
This option allows you to set a greeting message to
be displayed briefly when the phone is switched on.
The current message is displayed.
Add: allows you to add a name and number.
Edit: allows you to edit a name and number.
To...
Then press the...
Erase: allows you to erase a name and number.
Clear the existing
message
key and hold it
down until the message is
cleared.
If you have subscribed to the Alternate Line Service,
only the Edit option is available.
Enter a new message
Appropriate alphanumeric
keys.
Language
You can set a different setting for the text language
and voice language. When the language option is set
to Automatic, the language is automatically
selected according to the language of the SIM
card used.
Return to the previous
menu level without
saving your input
key.
For more information on how to enter characters,
refer to page 42.
You can also set the default text input mode. For
details on the text input modes available, refer to
page 42.
82
83
S e t t in g s
S e t t in g s
Any-key Answer
Service Light
Depending on the setting of the Any-key Answer
option, you can answer an incoming call by pressing
This option allows you to select whether or not the
service light on the top of the phone is used.
any key except the
key and the Reject soft key.
The following options are available.
To reject the call, press
or the Reject soft key.
OFF: the service light is not used.
The following options are available.
ON: the service light flashes when the phone is
OFF: you can only press the
key or the Accept
ready for use.
soft key to answer the call.
Auto Redial
ON: you can answer an incoming call by pressing
any key except the
key.
key and the Reject soft
With the Auto Redial function, the phone makes up
to ten attempts to redial a phone number after an
unsuccessful call.
Note: The interval between two call attempts varies.
Backlight
You can select whether or not the phone uses the
backlight. A marginal increase in standby/talk time
can be achieved by turning the backlight off.
The following options are available.
OFF: the number is not redialled.
The following options are available.
ON: the number is redialled automatically.
OFF: the backlight is not used.
Auto Answer
Short: the backlight comes on when you press a key
or receive a call and switches off 10 seconds after
the last key is pressed.
With the Auto Answer function, the phone auto-
matically answers calls after 3, 5 or 10 seconds. You
can also turn this feature off.
Long: the backlight comes on when you press a key
or receive a call and switches off 20 seconds after
the last key is pressed.
Note: This feature is only available when the phone
is connected to a car kit (optional).
84
85
S e t t in g s
S e t t in g s
Caller ID
Reset Settings
You can prevent your phone number from being
displayed on the phone of the person being called.
You can easily reset your phone to its default
configuration. To do so, proceed, as follows.
Note: Some networks do not allow the user to
1. Select the Reset Settings menu option.
change this setting.
2. Enter the phone password.
The following options are available.
Note: The password is preset to 0000. To change this
Default: the default setting provided by the network
is used.
password, refer to page 99.
Hide Number: your number is not displayed on the
Active Line
other person’s phone.
Note: The SIM card may be used with two
subscriber numbers (network service). This
function is available only if your SIM card
supports it.
Send Number: your number is sent each time you
make a call.
Active Flip
This menu allows you to select the line to be used
when making calls. However, calls can be answered
on both lines, regardless of the line selected. When
you select a line, the line number appears as an
indicator after the operator/service provider name.
The voice dial or voice command mode can be
activated automatically whenever the flip cover is
opened.
The following options are available.
OFF: the voice dial or voice command mode must be
activated manually via the phonebook; for further
information, refer to page 35.
When you select the Manual option, you can choose
a line whenever you access the call barring, diverting
and waiting features; the active line is not displayed.
Voice Dial: the voice dial mode is activated when
you open the flip cover.
Voice Command: the voice command mode is
activated when you open the flip cover.
86
87
S e t t in g s
S e t t in g s
You can specify individual diverting options for each
of the following call types:
Network Services
Menu 5-2
• Voice calls only
These menu functions are network services.
• Fax calls only (not available when line 2 is in use)
• Data calls only (not available when line 2 is in
use)
Please contact your service provider to check their
availability and subscribe to them, if you so wish.
Example: You can:
Call Diverting
• Systematically divert fax calls to your
office fax machine
• Divert voice calls to your colleague if
you are already using the phone
Note: Some call divert options may not be shown if
they are not supported by your network
operator.
This network service enables incoming calls to be
rerouted to the number that you specify.
Example: You may wish to divert your business calls
to a colleague while you are on holiday.
To set your call diverting options, proceed as follows.
1. Select the type of call diverting required by
pushing
up or down until the appropriate
option is highlighted, and then press Select.
Call diverting can be set up in the following ways.
2. Select the type of calls to be diverted by
Divert Always: all calls are diverted.
pushing
up or down until the appropriate
Busy: calls are diverted if you are already making
option is highlighted and then press Select.
another call.
3. Press the Activate soft key to confirm your settings.
No Reply: calls are diverted if you do not answer
the phone.
4. Enter the number to which the calls are to be
diverted.
Unreachable: calls are diverted if you are not in an
To enter the international code, press
until
area covered by your service provider.
the + sign is displayed. You can also select a
number in the phonebook or the voice server
number, by pressing the Options soft key, followed
by PhoneBook or Voice Server Number.
Unavailable: calls are diverted if you are busy, do
not answer or cannot be reached.
Cancel All: all call diverting options are cancelled.
5. When you are satisfied, press the Send or OK
soft key.
Note: These options may be different, depending on
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
the SIM card.
88
89
S e t t in g s
S e t t in g s
Call Barring
The call barring network service allows you to
restrict your calls.
To deactivate specific call diverting settings, proceed
as follows.
1. Select the call diverting option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
Call barring can be set up in the following ways.
All outgoing: calls cannot be made.
International: international calls cannot be made.
International except to home: when abroad, calls
can be made only to numbers within the current
country and to your home country, that is the country
where your home network provider is located.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
You can also deactivate all call diverting settings by
selecting the Cancel All option.
All Incoming: calls cannot be received.
Incoming while abroad: calls cannot be received
when you are using your phone outside your home
service area.
Note: When all calls are diverted, one of the divert
indicators below is displayed on the last line of
the display with the flip cover closed, if
supported by your SIM card.
Cancel All: all call barring settings are deactivated;
Divert Line 1: all calls from line 1 are diverted.
Divert Line 2: all calls from line 2 are diverted.
Divert All: all calls from lines 1 and 2 are
diverted.
calls can be made and received normally.
To set your call barring options, proceed as follows.
1. Select the type of call barring required by
pushing
up or down until the appropriate
option is highlighted and then press the Select
soft key.
2. Select the type of calls to be barred by
pushing
up or down until the appropriate
option is highlighted and then press the Select
soft key.
3. Press the Activate soft key to confirm your
settings.
90
91
S e t t in g s
S e t t in g s
Call Waiting
This network service enables you to be informed
when someone is trying to reach you during another
call.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To set your call waiting options, proceed as follows.
1. Select the type of calls to which the call waiting
To deactivate specific call barring settings, proceed
as follows.
option is to be applied by pushing
up or down
until the appropriate option is highlighted and
then press the Select soft key.
1. Select the call barring option to be deactivated.
2. Select the type of call to which this option applies.
3. Press the Remove soft key.
2. Press the Activate soft key to confirm your
settings.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
4. Enter your call barring password supplied by your
service provider.
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
To deactivate specific call waiting settings, proceed
as follows.
You can also deactivate all call barring settings by
selecting the Cancel All option.
1. Select the type of call to which the option applies.
2. Press the Deactivate soft key.
Change Barring Password: you can set and
The phone sends your settings to the network and
the network’s acknowledgement is displayed.
change the call barring password obtained from your
service provider using this option. You must enter the
current password before you can specify a new one.
You can also deactivate all call waiting settings by
selecting the Cancel All option.
Once you have entered a new password, you are
asked to confirm it by entering it again.
92
93
S e t t in g s
S e t t in g s
Network Selection
The Network Selection feature enables you to:
• Indicate whether the network used when roaming
(outside your home area) is selected automatically
or manually
Preferred List: allows you to list your preferred
networks to be used when roaming. Your phone uses
the networks in order of appearance in this list,
provided that the network is available.
• Set up a preferred list to be used when selecting
a network automatically
When you select this option, the current preferred
list is displayed if it already exists (see the procedure
below). Otherwise, the list of available networks is
displayed directly (see Step 2).
Note: You can select a network other than your
home network only if it has a valid roaming
agreement with your home network.
1. To...
Scroll through
Then push...
up or down.
To indicate whether the network is to be selected
automatically or manually when roaming, proceed as
follows.
the preferred list
Change an entry in
the preferred list
up or down to highlight
the required entry, then
press the Edit soft key.
1. When Network Select is displayed, press the
Select soft key.
2. Push
up or down until the appropriate option
2. Select the network to be added to the list by
pushing up or down until it is highlighted,
is highlighted and press OK.
If you select Automatic, you are connected to the
first available network in the preferred list when
roaming.
followed by Select.
The network is added to the list.
If you select Manual, the phone scans for the
available networks. Go to Step 3.
3. Push
up or down until the preferred network
is highlighted and press OK.
You are connected to that network when roaming.
94
95
S e t t in g s
S e t t in g s
Line Identification
This option allows you to view the following line
identification settings.
Deactivate: deactivates the CUG function.
Index List: lets you list, add or delete CUG index
numbers. The list of current CUG indexes appears.
Add a new CUG index (as advised by your service
provider) or delete a selected group.
CLIP (Calling Line Identification Presentation) /
COLP (Connected Line Identification Presentation)
If these network functions are active, the caller’s
number is displayed during a call. If the phone
number matches one stored in the phonebook, the
caller’s name is also displayed.
To...
Then...
Scroll through the
Push
up or down.
existing CUG indexes
CLIR (Calling Line Identification Restriction) /
COLR (Connected Line Identification Restriction)
If these network functions are active, your phone
number is not displayed on the called person’s phone.
Add a new CUG index Press the Options soft key,
select Add and enter the
index.
Delete a CUG index
Push
up or down to
Closed User Group (CUG)
select the index to be
deleted, press the Options
soft key and select Delete.
This network service allows incoming and outgoing
calls to be restricted to a selected user group. You
may be a member of up to 10 user groups.
Outside Access: enables you to allow or prohibit
calls to numbers other than those nominated for the
Closed User Group. This feature depends on the
nature of your CUG subscription. Please check with
your service provider.
For details on how to create, activate and use a
closed user group, contact your service provider.
Example: A company lends SIM cards to its employees
and wants to restrict outgoing calls to
members of the same team.
Default Group: you may communicate a default
CUG to your service provider. If you have done so,
you can enable the Default Group option on your
phone. When making a call, you will be given the
option of using your default CUG, instead of
selecting one from the list.
Activating a Closed User Group
If you select the Closed User Group menu, you are
asked if you want to activate the CUG function. Press
the Yes soft key. You can now access the following
options.
96
97
S e t t in g s
S e t t in g s
Change PIN
Security
Menu 5-3
This feature allows you to change your current PIN
to a new one, provided that the PIN Check feature is
enabled. You must enter the current PIN before you
can specify a new one.
The Security feature enables you to restrict the use
of your phone to:
• The people of your choice
• The types of calls of your choice
Once you have entered a new PIN, you are asked to
confirm it by entering it again.
Various codes and passwords are used to protect the
features of your phone. They are described in the
following sections (see also page 125).
Phone Lock
When the Phone Lock feature is enabled, the phone
is locked and you must enter the phone password
each time the phone is switched on.
PIN Check
When the PIN Check feature is enabled, you must
enter your PIN each time you switch the phone on.
Consequently, any person who does not have your
PIN cannot use your phone without your approval.
The password is factory set to 0000. To change the
phone password, refer to the Change Password
menu option (5-3-4) below.
Note: Before disabling the PIN Check feature, you
Once the correct password has been entered, you
can use the phone until you switch it off.
must enter your PIN.
The following options are available.
To change your PIN, refer to the Change PIN menu
Enable: you are required to enter the phone
option (5-3-2) on the next page.
password when you switch the phone on.
The following options are available.
Disable: you are not asked to enter the phone
password when you switch the phone on.
Enable: you must enter the PIN each time the phone
is switched on.
Change Password
Disable: the phone connects directly to the network
The Change Password feature allows you to change
your current phone password to a new one. You must
enter the current password before you can specify a
new one.
when you switch it on.
The password is factory set to 0000. Once you have
entered a new password of up to four digits, you are
asked to confirm it by entering it again.
98
99
S e t t in g s
S e t t in g s
LCD
Menu 5-4
SIM Lock
When the SIM Lock feature is enabled, your phone
only works with the current SIM.
The LCD menu enables you to customise the LCD
display.
Once you have entered the lock code, you are asked
to confirm it by entering it again.
Screen Mode
You can select the screen image to be displayed in
idle mode when the flip cover is closed.
To unlock the SIM, you must enter the SIM lock code.
FDN Mode
Normal Mode: the LCD displays <Service provider>
and the current time and date.
The FDN (Fixed Dial Number) mode, if supported by
your SIM card, allows you to restrict your outgoing
calls to a limited set of phone numbers.
Image Display: when the flip cover is closed, the LCD
displays the image selected via the Select Image
option. When the flip cover is open, the LCD displays
the same information as on the normal screen.
The following options are available.
Enable: you can only call phone numbers stored in
the phonebook. You must enter your PIN2.
Clock: when the flip cover is closed, the LCD displays
the clock selected via the Select Clock option.
Disable: you can phone any number.
Select Image
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
This option allows you to select the image to be
displayed when you set the Screen Mode option to
Image Display. You can select one of five images
(Image 1 ~ 5).
To change your PIN2, refer to the Change PIN2
menu option (5-3-7) below.
LCD Contrast
This option allows you to adjust the contrast of the
Change PIN2
The Change PIN2 feature allows you to change your
current PIN2 to a new one. You must enter the
current PIN2 before you can specify a new one.
LCD screen. Push
decrease the contrast.
up to increase or down to
Select IDLE
Once you have entered a new PIN2, you are asked to
confirm it by entering it again.
This option allows you to select the IDLE type to be
displayed, by pushing
in the appropriate direction.
Note: Not all SIM cards have a PIN2. If your SIM
card does not, this menu option is not
displayed.
Select Clock
This option allows you to select the type of clock to be
displayed in idle mode when the flip cover is closed.
100
101
S e t t in g s
S e t t in g s
Browser
Menu 5-6
Quick Menu
Menu 5-5
Note: This menu may not be shown, depending on
The
key can also be used as a shortcut key.
your network service provider.
When pushed in the appropriate direction in idle
mode, it allows you to access specific menu options
directly.
You can set up several proxies using the Proxy
Settings menu option (5-6-1), and you can designate
one as the current proxy, using the Current Proxy
menu option (5-6-2). The following parameters must
be set for each proxy; they may vary, depending on
your service provider. Contact your service provider
for further details.
1. Select the direction to be assigned a shortcut:
• UP (")
• DOWN (❷)
• RIGHT (❿)
• LEFT (➛)
Proxy Name: name of the proxy server.
2. Select the required menu option to be assigned to
the key.
WDP Address: IP address required to connect to the
Internet.
3. Press the Select soft key to save the setting.
Port Number: number of the port to be used to
connect the gateway.
Home URL: URL of your home Web site.
Access Point
• NAS Phone Number: PPP server phone number.
• Login Name: PPP server login ID (may be optional).
• Password: PPP server password (may be optional).
• Network Type: V.32 Transparent, V.32 Non-
Transparent, V.110 Transparent or V.110 Non-
Transparent.
102
103
S e t t in g s
Auto Antenna
Menu 5-7
You can decide whether the antenna is to extend and
retract automatically.
The following options are available.
Flip On/Off: the antenna automatically extends
when you open the flip cover and retracts when you
close the flip cover.
Keypad: the antenna automatically extends when
you press
. It retracts
or one of keys(0-9, and #)
*
when you press
or colse the flip cover.
Notes:
• If the phone switched off (you hold down the
key or the battery is discharged), the antenna
automatically retracts.
• The Auto Antenna feature is not available if you are
using an ear-microphone (optional).
IMPORTANT! Do not bend the antenna and do not
hinder its movement. You may damage
the phone and/or cause it to
malfunction.
104
Organiser
The Organiser feature enables you to:
•
Write your schedule or To Do List
• Calculate
• Check the calendar
• Set the current date and time
•
Set the alarm so that the phone rings at a specific
time (to remind you of an appointment for example)
• Find out what time it is in various cities around
the world
Scheduler
Menu 6-1
The Scheduler helps you to keep track of reminders,
calls that you need to make, meetings and birthdays.
The phone alarm rings when the date set for a
birthday, reminder or call is reached.
Note: Your phone must be switched on to use this
function.
When you press the Options soft key, the following
options are available.
Go to date: allows you to enter a particular date and
schedule an event on that date.
View All: shows the events scheduled.
Delete All: deletes all scheduled events.
105
Org a n is e r
Org a n is e r
To schedule a new event, proceed as follows.
Alarm
Menu 6-2
1. When the calendar is displayed, use the volume
keys to select the month, push
select the week, and push
select a day. You can also use the Go to date
up or down to
left or right to
This option allows you to set the alarm to ring at a
specific time. You can set one or more alarms.
The following alarms are available.
menu option to specify the date. If you wish to
cancel your selection, press
.
Daily Alarm: the alarm rings every day at the same
time.
2. Press the OK soft key.
Once Alarm: the alarm rings only once and is then
deactivated.
3. Select a schedule type. Four types are available.
Reminder: requires a description and the time.
Call: requires a phone number and the time.
Meeting: requires a description and the time.
Birthday: requires a name and the time.
Weekly Alarm: the alarm rings every week on the
same day and at the same time.
The Alarm Tone option allows you to select a
specific tone for the alarm.
4. Enter the appropriate information, referring to
page 42 for further details on how to enter text.
5. If you wish to set the alarm to ring on the
scheduled date and time, select Yes. Otherwise,
select No.
To set the alarm, proceed as follows.
1. Select an alarm type by pressing the Select soft
key.
6. If you selected Yes, set the time for the alarm
and press OK.
The Set Alarm option allows you to set the
alarm time or days of the week.
A check mark is displayed in front of the date in the
calendar to indicate that an event has been
scheduled. If you select such a date, you will see the
2. If you choose Weekly Alarm, select the required
day of the week and press the
symbol appears to indicate that the day is selected.
To remove it, press the key.
key. The
*
contents. If more than one event exists, push
or down to switch between them. The following
options are available:
up
You can set more than one day.
Add: allows you to add new contents.
Delete: deletes the scheduled event.
Move: moves the scheduled event to a new date.
Copy: copies the scheduled event to a new date.
Delete Day: deletes all events scheduled on that
date.
3. Press the OK soft key.
4. Enter the required time, then press the OK soft
key.
“Alarm Activated” is displayed.
106
107
Org a n is e r
Org a n is e r
The alarm icon ( ) is displayed in the top line of the
display. To stop the alarm when it rings, open the flip
cover or press any key.
To erase any mistakes or clear the display, press
the key.
To enter a decimal point, press the
key. It
calculates down to the second decimal place.
To deactivate the alarm, select Remove Alarm.
Examples:
Note: If no battery is attached to the phone, the
battery is discharged or the phone is switched
off when the alarm is to ring, the alarm does
not ring.
Expression
12*3+5=
Key Sequence
Result
12x3+5
(or
(or
(or
(or
(or
(or
(or
)
)
)
)
)
41
91
102
25
34+57=
45+57=
48-23=
14-23=
68*25=
68*40=
34+57
45
Calculator
Menu 6-3
48-23
14
You can use the phone as a 9-digit calculator. The
calculator provides the basic arithmetic functions:
addition, subtraction, multiplication, division,
percentages.
-9
68x25
40
) 1700
) 2720
35/14=
98/14=
35/14
98
(or
(or
)
)
2.5
7
To use the calculator, proceed as follows.
10% of 200
10=? % of 100
200x10
10/100
20
10
1. Enter the first number using the number keys.
10% premium of 200 200+10
10% discount of 200 200-10
220
180
2. Press the Operator soft key until you find the
appropriate arithmetic symbol: + (add),
- (subtract), x (multiply), / (divide).
square of 4
4x
8/
(or
(or
)
)
16
0.12
reciprocal of 8
3. Enter the second number.
Note: When you have finished with the calculator,
press the
key to return to the previous
4. Repeat Steps 2 and 3 if necessary.
menu level.
5. To calculate the result, press the Equal soft key
or the
key.
108
109
109
Org a n is e r
Org a n is e r
To Do List
Menu 6-4
This feature allows you to:
You can choose the following options, by pressing
• Draw up a list of tasks to be done
the Options soft key.
• Assign a priority and deadline to each task
• Sort the tasks by priority and status mark ( for
task to be done, ꢀ for completed tasks)
New: allows you to create a new task.
Mark: allows you to mark a task as completed.
Edit: allows you to edit an existing task.
Creating the To Do List
Sort: allows you to sort the tasks by priority (high,
low) or by status (done, undo).
To create the To Do List, proceed as follows.
1. Press the New soft key.
Copy: copies a task.
2. Enter the task.
Delete: deletes a task.
Delete All: deletes all tasks.
For further information on how to enter text, see
page 42.
3. Press the OK soft key.
Calendar
Menu 6-5
4. Select high or low priority by pushing
up or
down and pressing the Select soft key.
You can view calendars for 1900 through to 2099.
The following indication appears in the bottom right
of the display:
5. Enter your deadline.
6. Press the Yes soft key.
xxxD/yyW
Editing the To Do List
where xxx represents the number of the day in the
year and yy represents the number of the week.
Example: 122D/18W
If tasks are already defined in the To Do List when
you select the To Do List menu option (6-4), the
current contents are displayed with the associated
status mark and priority.
Push
left or right to change days, push
or down to change weeks and press the volume keys
up
to change months.
To view the detailed contents of a task, press the
View soft key. To change the status of a task, press
You can also change dates by pressing the Goto soft
key.
the
key.
110
111
Org a n is e r
Org a n is e r
World Time
Menu 6-6
Clock
Menu 6-7
You can use your phone to check the current time in
21 major cities around the world. Scroll through the
Using this option, you can set the current date and
time.
cities by pushing
The screen shows the:
• City name
in the appropriate direction.
Set Time
This option allows you to change the time displayed,
using the 24-hour system.
• Current date and time
• Time difference between the selected city and
your city if you have set the local time (see below
for further details) or GMT (by default)
Note: Before setting the time, you must specify your
time zone, via the World Time menu option (6-6).
To select the time zone in which you are located,
proceed as follows.
Set Date
This option allows you to change the date displayed.
Enter the day, month and year, using the format
specified in the option below.
1. Select the city corresponding to your time zone by
pushing
in the appropriate direction one or
more times.
The local date and time are displayed.
Format
2. Press the Set soft key.
This option allows you to select the date format:
3. To...
Then press the...
•
•
DD/MM/YYYY (day, month, year)
MM/DD/YYYY (month, day, year)
Update the current
Set Local soft key.
date/time with this
new setting
Indicate that the
Set DST soft key.
time zone is currently A check mark is shown
using the daylight
saving time
next to the time
difference.
Indicate that the
Remove DST soft key
time zone is no longer (only available when the
using the daylight
saving time
check mark is shown
next to the time
difference).
112
113
Games
WWW Services
Using this menu you can also enjoy popular games
with the phone.
You can use your phone as a Web Browser.
You can obtain up-to-date news, weather, sport, and
other information as well as use e-mail and other
Internet services.
Scroll to the chosen game and press the Select soft
key.
Please contact your service provider to open your
Internet account. To use the Web Browser, you must
indicate your phone number via the Own Number
menu option (5-1-2).
The following options are available.
Play: allows you to start a game.
Configuration: allows you to adjust phone settings,
such as the backlight and the sound.
Launching the Browser
To adjust each setting, highlight the Backlight or
To launch the browser from the idle mode, press
Sound option by pushing
up or down and then
the
press the Menu soft key, followed by the
and keys.
key on the left side of the phone, or
toggle between ON and OFF by pressing the On/Off
soft key.
Instructions: gives you an explanation of how to
play the game.
You can scroll through the text by pressing the Next
soft key repeatedly.
Once connected, the homepage (or the last page
visited) is displayed. The content depends on the
service provider.
High Score: shows you the game’s high score list.
Exiting the Browser
To stop playing a game, press the
Exit soft key
key or the
To exit the browser at any time, press the
The idle screen is displayed.
key
.
.
If you record a high score for a given game, the phone
displays the High Score screen when the game is
over.
Using Local Bookmarks
You can store the addresses of up to five Internet
sites for easy access using the Bookmark feature.
114
115
WWW S e rv ic e s
WWW S e rv ic e s
To access the Bookmark feature, proceed as follows.
Navigating with the WAP Browser
1. In idle mode, press the Menu soft key.
You can surf the Internet using either the phone keys
or the WAP Browser menu.
2. Press
3. Press
for WWW Services.
for Bookmark.
Using the Phone Keys
4. Highlight the required bookmark by pushing
up or down and press the Select soft key.
When surfing the Internet, the phone keys function
differently from the phone mode.
5. Press the Options soft key.
Three options are available.
To...
Then...
Edit: allows you to create or edit a local bookmark.
1. Enter the required title (up to 14 characters).
2. Press the OK soft key.
Scroll each line of
the content area
Push
up or down.
key
Return to the previous Press the
page
(except on the homepage).
Press the key
and hold it down anywhere.
3. Enter the URL address (up to 128 characters).
4. Press the OK soft key.
Return to the startup
homepage
Go: allows you to open the selected page.
Delete: allows you to delete the selected bookmark.
Using the WAP Browser Menu
There are various menu options available when
surfing the Internet.
Opening a Page Directly
To access the WAP Browser menu, proceed as
follows.
You can open any Web page by entering its URL
address.
1. Press the
key
.
To enter the URL address directly, proceed as follows.
A list of menu options appears.
1. In idle mode, press the Menu soft key.
2. Highlight the required option by pushing
or down.
up
2. Press
3. Press
for WWW Services.
for Goto.
3. Press the OK soft key to select the option.
4. Enter the URL address and press the Go soft key.
4. If necessary, select the secondary option by
pushing
up or down and pressing OK.
116
117
WWW S e rv ic e s
WWW S e rv ic e s
Note: The WAP Browser menus may vary,
Entering Text, Numbers, or Symbols
depending on your version of the browser.
When you are prompted to enter text, the current
text entry mode appears above the right soft key:
abc/Abc/ABC, NUM or SYM 1 ~ 4. To change modes,
press the right soft key until the required mode is
displayed.
The following options are available.
Reload: reloads the current page.
Home: takes you back at any time to the homepage
of the Wireless Web service provider.
abc/Abc/ABC: allows you to enter lower-case and
upper-case letters. You can switch between lower-
Bookmarks: allows you to load a bookmarked Web
page directly.
and upper-case letters by pressing the
key
.
SYM1 ~ 4: allows you to enter various symbols and
punctuation marks. To view more symbols, press the
More soft key.
Mark Site: adds the current page to your bookmark
list.
About Phone.com: shows the version of the WAP
Browser.
NUM: allows you to enter numbers.
If you wish to edit text, move the cursor to the
Advanced...: gives you access to the following
advanced features. Some features may not be
supported by your network operator.
required position, by pushing
direction, and clear the wrong letter by pressing
the key. Then enter the correct letter.
in the appropriate
Show URL: shows the URL of the current page.
HomePage: moves to the homepage.
Network Connection Information
Offline Services: allows you to copy and save Web
pages, so that you can view them even if the
network is down.
To check the network connection time, press and
hold down the
key. You can see the connection
time on the last line of the content area.
The linger time is one or more minutes (depending on
your service provider). Consequently, if you do not
use the browser for one or more minutes, the
network is disconnected automatically. In this case,
you can see that the connection time is stopped at
that point.
Outbox: stores outgoing requests from the browser
so that they can be processed at a later date.
Restart Up. Browser: clears the cache memory and
displays the homepage.
Encryption: allows you to check and generate the
security key required to contact a server.
The connection time is reset whenever you exit the
browser.
118
119
Ad d it io n a l S e rv ic e s
Additional Services
ALS (Alternate Line Service)
Note: Please contact your service provider to check
the availability of this feature and how to
subscribe to it.
3. Setting the Ring Type
To distinguish between incoming calls on the two
lines, you can select a different ring type for each line
with the Ring Tone menu option (4-1). See page 76
for further details.
The ALS feature enables two lines to be associated
with one SIM card. Consequently, you can make and
receive calls on either line as required. If you
subscribe to this network service, a few additional
menu options enable you to set up this feature.
4. Setting Call Diverting Options
You can set up call diverting options for each line,
via the Call Diverting menu option (5-2-1). This
service enables you to divert calls received on a
given line to the number specified. See page 88 for
further details.
1. Selecting a Line
With the Active Line menu option (5-1-#), you can
set a line to be used automatically when you make a
call or you can select the line manually for each call.
For further details, refer to page 87.
2. Editing the Line Name
You can edit the name of each line via the Own
Number menu option (5-1-2).
When you edit the name of a line, the name is
displayed, whenever necessary, instead of “Line 1” or
“Line 2”. For further details, refer to page 83.
120
121
S o lv in g P ro b le m s
Solving Problems
Before contacting the after-sales service, perform the
following simple checks. They may save you the time
and expense of an unnecessary service call.
“No service” is displayed
• The network connection was lost. You may be in a
weak reception area (in a tunnel or surrounded by
buildings). Move and try again.
• You are trying to access an option for which you
have not taken out a subscription with your
service provider. Contact the service provider for
further details.
When you switch your phone on, the following
messages appear
Insert SIM Card
• Check that the SIM card is correctly installed.
• The phone requires a 3 V SIM card. Please contact
your service provider if you experience any
problems.
You have entered a number but it was not dialled
• Have you pressed the
key?
• Are you accessing the right cellular network?
• You may have set an outgoing call barring option.
Phone Locked
Your correspondent cannot reach you
• The automatic locking function has been enabled.
You must enter the phone’s password before you
can use the phone.
• Is your phone switched on (
more than one second)?
• Are you accessing the right cellular network?
• You may have set an incoming call barring option.
pressed for
Enter PIN
• You are using your phone for the first time. You
must enter the Personal Identification Number
supplied with the SIM card.
Your correspondent cannot hear you speaking
• Have you switched off the microphone (Mute
appears)?
• The option requiring that the PIN be entered each
time the phone is switched on has been enabled.
You must enter your PIN and then disable this
option if so required.
• Are you holding the phone close enough to your
mouth? The microphone is located in the bottom
centre of the phone.
The phone starts beeping and “** Warning **
Battery Low” flashes in the display
• The battery is insufficiently charged. Replace the
battery with a charged one and recharge it.
Enter PUK
• The PIN code was entered wrongly three times in
succession and the phone is now blocked. Enter
the PUK supplied by your network operator.
122
123
S o lv in g P ro b le m s
Reference
Information
The audio quality of the call is poor
• Check the signal strength indicator in the display
( ); the number of bars after it indicates the
Access Codes
There are several access codes that are used by your
phone and its SIM card. These codes help you protect
the phone against unauthorised use.
signal strength from strong (
) to weak ( ).
• Try moving the phone slightly or moving closer to
a window if you are in a building.
The access codes (except for the PUK and PUK2
codes) can be changed using Security menu options.
See page 98 for further details.
No number is dialled when you recall a
phonebook entry
• Check that the numbers have been stored
correctly, by using the Phonebook Search feature.
• Re-store them, if necessary.
Phone Password
The phone password can be set to avoid unauthorised
use of your phone. The password generally supplied
with the phone is 0000. You are recommended to
change it before you start using your phone. Keep the
new password secret and in a safe place, separate
from the phone.
If the above guidelines do not enable you to solve
the problem, take a note of:
• The model and serial numbers of your phone
• Your warranty details
• A clear description of the problem
PIN
Then contact your local dealer or SAMSUNG
after-sales service.
The PIN (Personal Identification Number) protects
your SIM card against unauthorised use. The PIN is
usually supplied with the SIM card. When the PIN
Check feature is enabled (menu option 5-3-1), the PIN
is needed each time the phone is switched on.
If you key in an incorrect PIN three times in
succession, key in the PUK and press OK. Key in a
new PIN and press OK. Key in the new PIN again and
press OK.
124
125
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
PIN2
Barring Password
The PIN2, supplied with some SIM cards, is required to
access specific functions, such as call cost counters.
These functions are only available if supported by your
SIM card.
The 4-digit barring password is required when you use
the Call Barring function. You obtain the password
from your service provider when you subscribe to this
function. See page 92 for further details.
If you key in an incorrect PIN2 three times in
succession, key in the PUK2 and press OK. Key in a
new PIN2 and press OK. Key in the new PIN2 again
and press OK.
Using the Batteries
Your phone is powered by a rechargeable Li-ion
standard battery. Additional batteries can be obtained
from your SAMSUNG dealer.
PUK
The PUK (Personal Unblocking Key) is required to
change a blocked PIN. The PUK may be supplied with
the SIM card. If not, contact your local service
provider.
Precautions When Using Batteries
• Never use any charger or battery that is damaged
in any way.
If you key in an incorrect PUK ten times in
succession, the SIM card cannot be used anymore.
Contact your service provider for a new card.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby times
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
You cannot change the PUK. If you lose it, contact
your service provider.
PUK2
• Battery charging times depend on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time
to buy a new battery.
The PUK2, supplied with some SIM cards, is required
to change a blocked PIN2.
If you key in an incorrect PUK2 ten times in
succession, you cannot use the functions requiring
the PIN2. Contact your service provider for a new
card.
You cannot change the PUK2. If you lose it, contact
your service provider.
126
127
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
• If left unused, a fully charged battery will
discharge itself over time.
Safety Information
Road Safety
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-approved
chargers. When a charger is not in use, disconnect
it from the power source. Do not leave the battery
connected to a charger for more than a week,
since overcharging may shorten its life.
• Remember, road safety always comes first!
• Do not use a hand-held phone while driving a
vehicle. Always park the vehicle before having a
conversation.
• Make sure that the phone is stored safely and will
not fall or be broken in the event of a collision or
emergency stop.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
• The use of an alert device to operate a vehicle’s
lights or horn on public roads is not permitted.
• Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and life-time of the
• Only qualified personnel should install or service
the phone in a vehicle. Faulty installation or
service may be dangerous and may invalidate any
warranty applicable to the unit.
battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery
is fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
• Electronic fuel injection, anti-skid braking,
electronic cruise control or any other electronic
systems may malfunction due to the lack of
protection from radio signals. Check regularly that
all cellular phone equipment in your vehicle is
mounted and operating correctly.
• Do not short-circuit the battery. Accidental short
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the back of the battery), for example when
you carry a spare battery in a pocket or bag.
Short-circuiting the terminals may damage the
battery or the object causing the short-circuit.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
128
129
Re f e re n c e In f o rm a t io n
Re f e re n c e In f o rm a t io n
Operating Environment
• Remember to follow any special regulations in
force in any area and always switch off your
phone whenever it is forbidden to use it, or when
it may cause interference or danger (in a hospital
for example).
• Switch off your cellular phone when in aircraft.
The use of cellular phones in aircraft is illegal and
may be dangerous to the operation of the aircraft
or disrupt the cellular network. Failure to observe
these instructions may lead to the suspension or
denial of cellular telephone services to the
offender, legal action or both.
• Operation of any radio transmitting equipment,
including cellular phones, may interfere with
inadequately protected medical devices. Consult
a doctor or the manufacturer of the medical
device if you have any questions. Other electronic
equipment may also be subject to interference.
Care and Maintenance
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill the warranty
obligations and enjoy this product for many years.
• As with other mobile radio transmitting equipment,
you are advised that for satisfactory operations
and personal safety, the equipment should only be
used in the normal operating position.
• Keep the phone and all its parts and accessories
out of the reach of small children.
• The effect of the GSM transmit/duty cycle on
hearing aids and pacemakers is being
investigated, and there is potential hazard
associated with use close to such personal
medical electronic devices.
• Keep the phone dry. Precipitation, humidity and
liquids containing minerals will corrode the
electronic circuits.
• Do not use or store the phone in dusty, dirty areas
as its components may be damaged.
• Always switch off the phone when at a refuelling
point (service station). You are reminded of the
need to observe restrictions on the use of radio
equipment in fuel depots (fuel storage and
distribution areas), chemical plants or where
blasting operations are in progress.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries and warp or melt
certain plastics.
• Do not store the phone in cold areas. When the
phone warms up to its normal temperature,
moisture can form inside the phone, which may
damage the electronic circuits.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
130
131
Re f e re n c e In f o rm a t io n
Glossary
• Do not attempt to open the phone. Non-expert
handling of the phone may damage it.
To help you understand the main technical terms and
abbreviations used in this booklet and take full
advantage of the features on your mobile phone, here
are a few definitions.
• Do not drop or knock the phone. Rough handling
may damage the internal circuits.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it with
a soft cloth slightly dampened in mild, soapy water.
Active Flip
Ability to used the voice dial or voice command
features, simply by opening the phone.
• If the phone or any of its accessories are not
working properly, take them to your nearest
qualified service centre. The personnel there will
assist you, and if necessary, arrange for the phone
to be repaired.
ALS (Alternate Line Service)
Capability of associating two alternate lines with one
SIM card. You can make and receive calls on either
line as required.
Emergency Calls
Call Barring
Important! This phone, like any cellular phone, uses
radio signals, cellular and landline
Ability to restrict outgoing and incoming calls.
networks, as well as user-programmed
functions that cannot guarantee
connection in all conditions. Therefore,
you should never rely solely on any
cellular phone for essential communi-
cations (medical emergencies for example).
Call Diverting
Ability to reroute calls to another number.
Call Holding
Remember, to make or receive any calls, the phone
must be switched on and in a service area with
adequate cellular signal strength.
Ability to put one call on standby while answering or
making another call; you can then switch between
the two calls, as required.
Emergency calls may not be possible on all cellular
phone networks or when certain network services
and/or phone features are in use. Check with local
cellular service providers.
Call Waiting
Ability to inform users that they have an incoming call
when engaged on another call.
132
133
Glo s s a ry
Glo s s a ry
GSM (Global System for Mobile Communication)
Roaming
International standard for cellular communication,
guaranteeing compatibility between the various
network operators. GSM covers most European
countries and many other parts of the world.
Use of your phone when you are outside your home
area (when travelling for example).
SIM (Subscriber Identification Module)
Card containing a chip with all the information
required to operate the phone (network and memory
information, as well as the subscriber’s personal
data). The SIM card fits into a small slot on the back
of the phone and is protected by the battery.
Line Identification Services
Service allowing subscribers to view or block the
telephone numbers of callers.
Multiparty Calling
SMS (Short Message Service)
Ability to establish a conference call involving up to
five additional parties.
Network service sending and receiving messages to
and from another subscriber without having to speak
to the correspondent. The message created or
received (up to 160 characters long) can be
displayed, received, edited or sent.
Phone Password
Security code used to unlock the phone when you
have selected the option to lock it automatically each
time it switches on.
Soft Keys
PIN (Personal Identification Number)
Keys marked
which:
• Varies according to the function that you are
currently using
• Is indicated on the bottom line of the display just
above the corresponding key
on the phone, the purpose of
Security code that protects the phone against
unauthorised use. The PIN is supplied by the service
provider with the SIM card. It may be a four to eight-
digit number and can be changed, as required.
PUK (PIN Unblocking Key)
Voice Mail
Security code used to unlock the phone when an
incorrect PIN has been entered three times in
succession. The eight-digit number is supplied by
the service provider with the SIM card.
Computerised answering service that automatically
answers your calls when you are not available, plays
a greeting (optionally in your own voice) and records
a message.
134
135
In d e x
Index
A
A (continued)
C (continued)
E (continued)
ABC text mode • 46
Access codes • 125
Accessories • 9
Active Flip (5-1-0) • 23; 86
Active Line (5-1-#) • 87
Alarm (6-2) • 107
Alert Type (4-4) • 51; 79
ALS • 120
Answering
Calls (continued)
diverting (5-2-1) • 88
emergency • 8; 132
ending • 23
Contrast (5-4-3) • 101
Copying phonebook
numbers • 39
Cost of calls • 62
CUG (5-2-6)• 96
Error Tone (4-7) • 81
F
Fixed Dial Number (FDN)
mode (5-3-6) • 100
Functions
holding • 30
international • 22
making • 22
missed (1-1) • 26; 60
multiparty • 32
received (1-2) • 60
records (1) • 60
redialling
automatically • 85
rejecting • 25
searching for a number in
the phonebook • 40
time (1-4) • 61
via the phonebook • 35
waiting (5-2-3) • 93
Card
installing SIM • 15
Care • 131
Changing
call barring password • 92
password (5-3-4) • 99
PIN (5-3-2) • 99
PIN2 (5-3-7) • 100
text modes • 43
Characters
changing modes • 43
entering • 42
Charging batteries • 18
Chatting (2-7) • 69
Clock (6-7) • 113
types • 101
Closed User Group
(5-2-6) • 96
Composer
Melody (4-2) • 76
Conference calls
• See Multiparty calls
Connect
to Voice Mail (2-1-1) • 63
Tone (4-9) • 81
D
Date
selecting • 49
voice • 70
format (6-7-3) • 113
setting (6-7-2) • 113
Deleting
a call • 25
a second call • 31
G
Games (7) • 114
Greeting Message
(5-1-1) • 82
Groups
AnswerPhone (3-4) • 75
Antenna • 14; 104
Any-key Answer (5-1-4) • 84
Auto Answer (5-1-8) • 85
Auto Antenna (5-7) • 14; 104
Auto Redial (5-1-7) • 85
melodies • 78
missed calls • 27
phonebook numbers • 39
schedules • 105
tasks • 111
user • 96
voice dial numbers • 72
Dialled Calls (1-3) • 61
Dialling • 22
voice • 23; 70
Display • 12
contrast • 101
icons • 13
language • 83
H
B
Holding calls • 30; 93
Backlight • 14; 84; 101
Barring
calls (5-2-2) • 91
password • 92; 127
Batteries
I
Icons • 13
Identifying a caller • 86
Image
charging • 18
installing • 15
Diverting calls (5-2-1) • 88
screen • 101
low battery indicator • 19
precautions • 127
Broadcast (2-6) • 68
Browser
settings (5-6) • 103
using (8) • 115
E
K
Key tones
Earpiece volume • 24
Editing
melodies • 77
muting • 34
selecting • 80
sending • 34
volume • 24
Keypad
locking • 21
Keys • 10; 11; 102
messages • 66
missed calls • 26
phonebook numbers • 38
schedules • 105
To Do List • 110
Emergency calls • 8; 132
Erasing
C
Calculator (6-3) • 108
Calendar (6-5) • 111
Caller ID (5-1-9) • 86
Calls
L
melodies • 78
Language (5-1-3) • 83
Last number redialling • 24
automatic • 85
answering • 25
a second call • 31
barring (5-2-2) • 91
cost (1-5) • 62
missed calls • 27
phonebook numbers • 39
schedules • 105
tasks • 111
dialled (1-3) • 61
voice dial numbers • 72
136
137
In d e x
In d e x
L (continued)
N
P (continued)
R (continued)
LCD
contrast • 101
layout • 12
settings (5-4) • 101
LED indicator • 14
Length of calls • 61
Letters
changing modes • 43
entering • 42
Names
entering • 42
Phonebook (continued)
dialling • 37; 40
editing numbers • 38
erasing numbers • 39
making calls • 23; 37; 40
memory status • 39
options • 36
pasting numbers • 38
playing recorded
names • 38
Replaying
commands • 73
memos • 74
voice tags • 72
Reset Settings (5-1- ) • 87
Ring
tone (4-1) • 76
type • 79
volume (4-3) • 79
Roaming • 94
searching/dialling • 40
storing in the
phonebook • 35
Network Selection (5-2-4) • 94
Network Services (5-2) • 88
Numbers
copying phonebook • 39
correcting • 22
editing
*
Line Identification (5-2-5) • 96
Locking
ring tones • 39
keypad • 21
missed call • 26
phonebook • 38
entering • 48
erasing phonebook • 39
fixed dial • 100
own • 83
redialling • 24
automatically • 85
searching/dialling • 40
storing • 35
searching/dialling • 40
sending text messages • 37
storing numbers/
names • 35
voice recording • 37
PIN • 125
changing (5-3-2) • 99
checking (5-3-1) • 98
PIN2 • 126
changing (5-3-7) • 100
Preset Message
S
Safety
phone (5-3-3) • 99
SIM card (5-3-5) • 100
Low battery indicator • 19
batteries • 127
information • 129
precautions • 7
Scheduler (6-1) • 105
Screen Mode (5-4-1) • 101
SDN • 40; 41
Searching for names/
numbers • 40
Security (5-3) • 98
Selecting functions/
options • 49
M
Maintenance • 131
Melody Composer (4-2) • 76
Memory status • 39
Menus • 53-59
Messages • 63
List (2-4) • 66
Problem solving • 122
PUK • 126
O
broadcast (2-6) • 68
chatting (2-7) • 69
greeting (5-1-1) • 82
preset (2-4) • 66
reading (2-2) • 64
recording
Options
selecting • 49
Organiser (6) • 105
Own Number (5-1-2) • 83
Sending
PUK2 • 126
key tones • 34
messages • 65
Service
Q
answerphone • 75
replying to missed
calls • 27
setup (2-5) • 67
tone (4-6) • 80
Quick Menu (5-5) • 102
dialling numbers
(SDN) • 40; 41
light (5-1-6) • 14; 85
Settings
alarm • 107
browser • 103
date • 113
language • 83
LCD • 101
network • 88
phone • 82
quick menu • 102
reset • 87
security • 98
P
Password
R
barring • 127
changing • 92
phone • 125
Read Messages (2-2) • 64
Received calls (1-2) • 60
Recording
messages • 75
voice commands • 73
voice dial • 71
voice memos • 74
Records
call (1) • 60
Redialling
automatically • 85
last number • 24
Rejecting calls • 25
voice mail (2-1) • 63
writing (2-3) • 65
Microphone mute • 28
Minute Minder (4-8) • 81
Missed calls (1-1) • 26; 60
deleting • 27
editing • 26
replying by text
message • 27
Multiparty calls • 32
Mute
changing (5-3-4) • 99
Pasting numbers • 38
Phone
Lock (5-3-3) • 99
password • 99; 125
settings (5-1) • 82
Phonebook • 35
alert types • 39
calling • 37
time • 113
Setup (2-5) • 67
Shortcuts • 54; 102
copying numbers • 39
deleting recorded
names • 38
key tones • 34
microphone • 28
138
139
In d e x
S (continued)
V
Silent mode
activating/
deactivating • 21
SIM card
installing • 15
Vibration • 79
Voice Command (3-2) • 73
acting • 73
deleting • 73
playing • 73
locking (5-3-5) • 100
precautions • 15
SMS
recording • 73
Voice Dial (3-1) • 23; 70
acting • 71
see Messages
Soft keys • 49
Solving problems • 122
Switching on/off
microphone • 28
phone • 20
deleting numbers • 72
playing names • 72
recording • 71
Voice Functions (3) • 70
Voice language • 83
Voice mail • 63
Voice Memo (3-3) • 73
deleting • 74
Symbolic mode • 48
recording • 74
replaying • 74
Voice Server Number
(2-1-2) • 64
Volume adjustment
earpiece • 24
T
Text
changing modes • 43
entering • 42
Time
call (1-4) • 61
format • 113
keypad • 24
ring (4-3) • 79
setting (6-7-1) • 113
world (6-6) • 112
To Do List (6-4)• 110
Tone
W
Waiting
connect (4-9) • 81
error (4-7) • 81
keypad (4-5) • 80
melody • 76
message (4-6) • 80
ring (4-1) • 76
Travel adapter • 18
T9 mode • 44
calls • 30; 93
WAP Browser • 103; 115
World Time (6-6) • 112
Write Messages (2-3) • 65
WWW services (8) • 115
U
User groups • 96
140
141
142
|