Samsung SGH E770 User Manual

* Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-08316A

English. 01/2006. Rev. 1.1

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 97.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

•

MP3 player

Play MP3 files using your phone as

an MP3 player.

Indicates that you can get more information on

the referenced page.

ꢀ

File viewer

Open documents in various formats

on the phone without corruption.

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

Indicates a key on the phone. For example, [

]

[

]

Web browser

Access the wireless web to get up-

to-the-minute information and a

wide variety of media content.

Indicates a soft key, whose function is displayed

< >

on the phone screen. For example, <Menu

•

Image editor

Crop, resize, rotate, and decorate

your photos.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, image, video, and audio.

Voice commands

E-mail

Experience a new level of voice

command capability that allows for

easy hands-free use. You can select

menus, control camera settings, as

well as make phone calls without

any key presses.

Send and receive e-mails with image, video, and

audio attachments.

•

Phone to TV

View photos and video clips

captured with the phone on your TV

screen.

•

Bluetooth

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

•

Java

Enjoy Java™-based embedded

games and download new games.

VibeTonz™

•

Photo printing

Print your photos to preserve your best moments

Use the enhanced vibration feature,

which allows the phone to vibrate

rhythmically.

forever.

Browse the web...................................................... 17

Use Phonebook ...................................................... 17

Send messages...................................................... 19

View messages....................................................... 20

Use Bluetooth ........................................................ 22

Use Voice commands .............................................. 23

Use a memory card................................................. 24

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

AB, T9, Number, and Symbol mode

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, the MP3 player, the web, and other

special features

Use the camera...................................................... 15

Play MP3s.............................................................. 16

Index

104

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call log

ꢀ

p. 32

3 Applications

ꢀ

p. 38

5 Messaging

ꢀ

p. 52

8 Camera

9 Settings

ꢀ

p. 76

p. 83

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp. 32

ꢀp. 33

ꢀp. 34

1 MP3 player

2 Voice recorder

3 Image editor

4 Java world

5 World clock

6 Alarm

7 Voice commands

8 Calculator

9 Converter

ꢀp. 38

ꢀp. 41

ꢀp. 42

ꢀp. 44

ꢀp. 45

ꢀp. 46

ꢀp. 47

ꢀp. 48

ꢀp. 49

1 Create message

2 My messages

3 Templates

4 Delete all

5 Settings

ꢀp. 52

ꢀp. 55

ꢀp. 59

ꢀp. 60

ꢀp. 65

ꢀ

1 Time and date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Connection settings

10 Reset settings

ꢀp. 83

ꢀp. 84

ꢀp. 85

ꢀp. 87

ꢀp. 90

ꢀp. 92

ꢀp. 93

ꢀp. 95

6 Call time

6 Memory status

7 Call cost^*

6 File manager

ꢀp. 66

2 Phonebook

ꢀp. 34

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory card^**

7 Memory status

ꢀp. 66

ꢀp. 68

ꢀp. 69

ꢀp. 70

ꢀp. 72

10 Timer

1 Contact list

2 Add new contact

3 Group

ꢀp. 34

ꢀp. 35

ꢀp. 36

ꢀp. 37

ꢀp. 38

11 Stopwatch

12 Key management

13 SIM AT^*

4 Speed dial

5 My name card

6 Own number

7 Management

8 Service number^*

4 Browser

ꢀp. 49

* Shows only if supported by your

SIM card.

** Shows only if a memory card is

inserted.

1 Home

ꢀp. 49

ꢀp. 51

ꢀp. 52

7 Calendar

ꢀp. 72

2 Enter URL

3 Bookmarks

4 Saved pages

5 History

6 Clear cache

7 Browser settings

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Flash

Phone

Travel Adapter

Camera

lens

Navigation keys

(Up/Down/Left/

Right)

Camera key

External

display

Web access/

Confirm key

Right soft key

Memorycard

slot

Battery

User’s Guide

Headset jack

Left soft key

Dial key

Volume keys

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

MP3 player

control keys

Delete key

Microphone

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Alphanumeric

keys

Special

function keys

Get started

First steps to operating your phone

Install the battery.

Plug the travel adapter

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the adapter into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding [

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

Low battery indicator

press <OK>.

use is prohibited.

When the battery is low:

•

a warning tone sounds,

the low battery message displays, and

1. Open the phone.

Switch off

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

2. Press and hold [

Keys and display

Keys

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

Perform the function indicated on the bottom

your voicemail server. Press and hold [

0] to

line of the display.

enter an international call prefix.

In Idle mode, access your favourite menus

Enter special characters.

directly.ꢀp. 83

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

In Menu mode, scroll through menu options.

[

] to enter a pause between numbers.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume.

Make or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

With the phone closed, press and hold [

]

get a verbal time check. Press and hold [

to turn on the external display or flashlight.

Delete characters from the display, or an

item in an application.

In Idle mode, press and hold to turn on the

camera.

In Camera mode, take a photo or record a

video.

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Get started

Icons^*

Press and hold to launch or close the MP3

player.

Start playing music.

Received signal strength

Call in progress

Out of your service area; you

cannot make or receive calls

Move back to the previous file during

playback.

GPRS network

Connecting to GPRS network

EDGE network

Skip to the next file during playback.

Connected to Internet

Roaming network

New message

Display

Layout

Icons

display various icons.

New e-mail

New voicemail

Text and graphics

display messages,

instructions, and

Call diverting feature active

information you enter.

Home Zone, if registered for the

appropriate service

Soft key function

Office Zone, if registered for the

appropriate service

Contacts

indicators

show the current functions

assigned to the soft keys.

Bluetooth active

Connected to Bluetooth hands-free

car kit or headset

Access menu functions

Synchronised with PC

MP3 playback in progress

MP3 playback paused

Memory card inserted

Alarm set

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

display indicates their current role.

Ringer type setting

•

ꢀ

p. 85

: VibeTonz & Melody

Melody

Select

Back

• None

•

: VibeTonz

: VibeTonz then Melody

Quiet mode (VibeTonz)

Quiet mode (Mute)

Mute mode, during a call

Battery power level

* Depending on your country or service provider, the

icons shown on the display may vary.

Press the right

soft key to return

to the previous

menu level.

Press the left

soft key to select

the highlighted

option.

Get started

Customise your phone

Select an

option

1. Press the appropriate soft key.

2. Press the Navigation keys to

move to the next or previous

option.

1. In Idle mode, press <Menu

Display

language

and select Settings

settings Language

2. Select a language.

→

Phone

→

3. Press <Select> or [ ] to

confirm the function displayed

or option highlighted.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ringtone

→

Sound

4. To exit, choose either of the

following methods.

→

Incoming call

→

•

Press <Back> to move up

one level.

2. Select a ringtone category.

3. Select a ringtone.

•

Press [

mode.

] to return to Idle

4. Press <Save>.

Use shortcuts Press the number key

corresponding to the option you

want.

You can set wallpaper for the idle

screen on each display.

You can set the Navigation keys as

shortcuts to access your favourite

menus.

Idle mode

wallpaper

shortcuts

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

→

1. In Idle mode, press <Menu

and select Settings Phone

settings Shortcuts

2. Select a key.

→

Main

→

display or Cover display

→

2. Select an image or a video

category.

3. Select a menu to be assigned to

the key.

3. Select an image or a video.

4. Press <Select>.

You can switch the phone to Quiet

mode to avoid disturbing other

people.

5. Press <Save>.

Quiet mode

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

Press and hold [ ] in Idle mode.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

Get started

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

Phone lock

1. In Idle mode, enter an area

Make a call

code and phone number.

2. Press [ ].

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

3. To end the call, press [ ].

→

1. When the phone is ringing,

press [ ].

Answer a call

00000000, and press <OK>.

2. To end the call, press [ ].

3. Enter a new 4- to 8-digit

password and press <OK>.

Press [ / ].

Adjust the

volume during

a call

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, the MP3 player, the web, and

other special features

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

Use the camera

3. Press [ ] to start recording.

4. Press [ ] or < > to stop

recording. The video is saved

automatically.

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

[

]

to turn on the camera.

5. Press <Preview> to record

3. Aim the lens at the subject and

adjust the image.

another video.

4. Press [ ] to take a photo. The

photo is saved automatically.

1. In Idle mode, press <Menu

and select File manager

Videos Video clips

2. Select the video you want.

→

Play a video

5. Press <Preview> to take

→

another photo.

1. In Idle mode, press <Menu

and select File manager

Images Photos

2. Select the photo you want.

→

View a photo

→

Step outside the phone

Play MP3s

3. Press [ ] to select the files you

want and press <Select>.

Use these methods:

Copy MP3 files

to the phone

4. Press <Back> to return to the

•

Download from the wireless

web p. 49

MP3 player screen.

ꢀ

•

Download from a computer

using the optional Samsung PC

1. From the MP3 player screen,

press [ ].

Play MP3 files

StudioꢀSamsung PC Studio

2. During playback, use the

following keys:

User’s Guide

•

Receive via Bluetoothꢀp. 92

Copy to a memory card and

insert the card into the phone.

•

: pauses or resumes

playback.

•

Left: moves back to the

previous file.

ꢀp. 24

•

Right: skips to the next file.

Up: opens the play list.

/ : adjusts the volume.

Down: stops playback.

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add music from Phone or

Memory card

Create a play

list

→

Browse the web

Use Phonebook

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

To the phone’s memory:

Add an entry

1. In Idle mode, enter a phone

number and press <Options>.

2. Select Save contact

a number type.

→

Phone

In Idle mode, press [ ].

→

Launch the

web browser

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Caller ID, Ringtone, Group, and

Memo.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

To select an item, press [ ].

4. Press <Save> to save the

entry.

To return to the previous page,

press <Back>.

•

To move to the next page, press

Options> and select Go

Forward

To access options, press

Options>.

→

Step outside the phone

To the SIM card:

1. In Idle mode, press <Menu

and select Phonebook My

name card

Add an entry

Create and

send a name

card

→

(continued)

1. In Idle mode, enter a phone

number and press <Options>.

2. Specify your contact

information.

2. Select Save contact

→

SIM.

3. Enter a name.

3. Press <Save> to save the

4. Press <Save> to save the

name card.

entry.

4. To send the name card to other

people, press <Options> and

1. In Idle mode, press

Find an entry

select Send via

→

a sending

<Contacts>.

method.

2. Enter the first few letters of the

name you want.

3. Select a contact.

4. Scroll to a number and press

[

]

to dial, or press [ ] to

edit contact information.

Send messages

4. Select Image and video or

Sound

1. In Idle mode, press <Menu

and select Messaging

Create message Text

message

2. Enter the message text.

3. Press <Options> and select

Send a text

message (SMS)

5. For Image and video, select

Add image or Add video and

add an image or video clip.

→

For Sound, select Add sound

and add a sound clip.

6. Select Message

Save and send or Send only

4. Enter destination numbers.

5. Press [ ] to send the message.

7. Enter the message text and

press [ ].

8. Press <Options> and select

Send

1. In Idle mode, press <Menu

and select Messaging

Create message

Multimedia message

2. Select Subject

Send a

9. Enter destination numbers or

addresses.

→

multimedia

message

(MMS)

→

10.Press [ ] to send the message.

3. Enter the message subject and

press [ ].

Step outside the phone

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messaging

Create message Email

2. Select Subject

→

When a notification appears:

View a text

message

→

1. Press <View>.

2. Select the message from the

Inbox.

3. Enter the e-mail subject and

press [ ].

From the Inbox:

4. Select Message

5. Enter the e-mail text and press

6. Select File attached

1. In Idle mode, press <Menu

and select Messaging My

messages Inbox

2. Select an SMS message ( ).

→

[

→

7. Add image, video, sound, music

files, or document files.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

When a notification appears:

1. Press <View>.

1. In Idle mode, press <Menu

and select Messaging My

messages Email inbox

2. Select an account.

View a

multimedia

message

View an e-mail

→

2. Press <Options> and select

Retrieve

3. Press <Yes> to download new

3. Select the message from the

Inbox.

e-mails or headers.

4. Select an e-mail or a header.

From the Inbox:

5. If you selected a header, press

1. In Idle mode, press <Menu

and select Messaging My

messages Inbox

2. Select an MMS message (

Options> and select

→

Retrieve

→

Step outside the phone

Use Bluetooth

1. Access an application,

Phonebook File manager, or

Calendar

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

2. Scroll to an item.

3. Press <Options> and select

Send via

→

Bluetooth.

In Idle mode, press <Menu> and

Turn on

Bluetooth

select Settings

→

Bluetooth

→

4. Select a device.

Activation On

→

5. If necessary, enter the

Bluetooth PIN and press <OK>.

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

→

Search for new devices

2. Select a device.

If necessary, press <Yes> to

confirm the reception.

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Use Voice commands

1. In Idle mode, press <Menu

and select Applications

Voice commands Name

Search for a

name

Your phone can recognise specific voice commands in

order to dial a number or search for names in

Phonebook, or access menus. Your phone recognises

only English, French, German, Italian, Spanish, and

Russian.

→

2. At the voice prompt, say a

name.

1. In Idle mode, press <Menu

and select Applications

Voice commands Name

dial

3. If necessary, say “Next” or

“Previous” to select the name

you want.

Dial a name

→

4. Say nothing for 3 seconds or

press [ ] and the phone will

display contact information.

2. At the voice prompt, say a

name.

3. If necessary, say “Next” or

“Previous” to select the name

you want.

4. If the name has more than one

number, press [Left] or [Right]

to select the number you want.

5. Say nothing for 3 seconds or

press [ ] and the phone will

dial the currently selected

number.

Step outside the phone

Use a memory card

You can use an optional microSD memory card to

enlarge your phone’s memory capacity.

1. In Idle mode, press <Menu

and select Applications

Voice commands Direct

Access a menu

→

• Frequent erasing and writing will

shorten a card’s lifespan.

Important

memory card

2. At the voice prompt, say a

menu name, for example,

Phonebook.

• Do not remove a card from the

phone or turn off the phone

while data is being accessed or

transferred. This could result in

loss of data and/or damage to

the card or phone.

information

3. Say nothing for 3 seconds or

press [ ] and the phone will

open the menu.

• Do not subject cards to strong

shocks.

• Do not touch card terminals with

your fingers or metal objects. If

dirty, wipe the card with a soft

cloth.

• Keep cards away from small

children or pets.

Using a card adapter and a USB

card reader/writer, you can read

the card on a PC.

Use a card

adapter

• Do not expose cards in a place

subject to electro static

discharge and/or electrical

noise.

1. Insert a memory card into a

card adapter, and then the

adapter into a card reader/

writer.

2. Plug the USB connecter of the

card reader/writer into the USB

port on your PC.

1. Insert the card into the card

slot, with the label side face

down.

Insert a

memory card

3. Access the appropriate memory

disk and copy to and from the

card.

2. Push the card in with your

thumb until it locks into place.

If a file name is more than 32

characters, the file will not display

on the phone.

Using AB mode

Press the appropriate key until the character you want

appears on the display.

Enter text

AB, T9, Number, and Symbol mode

You can enter text for some features, such as

Messaging, Phonebook, or Calendar, using AB mode,

T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press and hold [ ] to switch between T9 mode

) and AB mode ( ). Depending on your

(

country, you may also be able to access an input

mode for your specific language.

•

Press [ ] to change case or switch to Number

mode (

Press and hold [ ] to switch to Symbol mode.

(Creating an SMS message with GSM-Alphabet encoding)

2. Enter the whole word before editing or deleting

characters.

Tips for using AB mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

3. When the word displays correctly, go to step 4.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [C] to delete characters one by one. Press

and hold [C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to insert a space.

Press the Navigation keys to move the cursor.

Entering a word in T9 mode

Press [

and hold [

] to delete characters one by one. Press

C] to clear the display.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

5], [5], and [6] to

T9 predicts the word that you are typing, and it

may change with each key that you press.

2. Press [0] to display alternative words for your key

presses. When there are no more alternative

words, Add appears on the bottom line.

3. Press <Add>.

Call functions

4. Enter the word you want using AB mode and press

<OK>.

Advanced calling features

Using Number mode

Making a call

1. In Idle mode, enter the area code and phone

number.

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

2. Press [ ].

• Press [

C] to clear the last digit or press and hold

Using Symbol mode

Symbol mode enables you to insert symbols.

] to clear the whole display. You can move the

cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between

numbers.

Press

display more symbols

select a symbol

[Up] or [Down].

Making an international call

1. In Idle mode, press and hold [

appears.

the corresponding

number key.

0]. The

character

clear the entered symbols

insert the symbols

[

2. Enter the country code, area code, and phone

number, then press [ ].

OK>.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

2. Scroll to the number you want and press [ ].

Making a call from Phonebook

Answering a call

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

When you receive an incoming call, the phone rings

and displays the incoming call image.

Phonebook.ꢀp. 34

Press <Accept> or [ ] to answer the call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Tips for answering a call

•

When Anykey answer is active, you can press

any key, except for <Reject> and [ ]. p. 84

When Active flip is active, you can simply open

the phone. p. 84

keys.ꢀp. 36

ꢀ

You can quickly dial a number from the SIM card using

its location number assigned when stored.

•

ꢀ

1. In Idle mode, enter a location number and press

•

Press <Reject> or [ ] to reject a call.

[

Press and hold [ / ] to reject a call or mute the

ringer, depending on the Volume key setting.

2. Press [Left] or [Right] to scroll through other

numbers.

ꢀp. 84

3. Press <Dial> or [ ] to dial the number you want.

Voice dialling

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

You can dial a number stored in Phonebook by

speaking the associated name into the microphone.

ꢀp. 46

1. Press <View>.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Ending a call

Close the phone or press [ ].

Call functions

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Using the headset

Use the headset to make or answer calls, or to start

the voice dialling feature without holding the phone.

Connect the headset to the jack on the left side of the

phone. The button on the headset works as listed

below:

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Press

redial the last call

answer a call

end a call

the button twice.

the button.

4. Press <Options> and select End held call to end

the call on hold.

the button.

5. To end the current call, press [ ].

start voice dialling

and hold the button.ꢀp. 46

Answering a second call

You can answer an incoming call while already on the

phone, if your network supports it and you have

activated the call waiting feature.ꢀp. 88

Options during a call

You can access a number of functions during a call.

1. Press [ ] to answer the call. The first call is

automatically put on hold.

Adjusting the volume during a call

Use [ / ] to adjust the earpiece volume during a call.

2. Press <Swap> to switch between the calls.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

3. Press <Options> and select End held call to end

•

Voice on/Voice off: switch off the phone's

microphone so that the other person on the phone

cannot hear you, or switch it back on.

the call on hold.

4. To end the current call, press [ ].

Mute keys/Send keys: switch the key tones on

or off.

Using the Speakerphone feature

Use your phone as a speaker phone to talk and listen

with the phone a short distance away.

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Press [ ] and then <Yes> to activate the

Speakerphone feature. Press [ ] again to switch back

to the earpiece.

•

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

Using In-call options

Press <Options> to access the following options

during a call:

•

Speaker on

feature or switch back to Normal mode.

Switch to headset Switch to phone: switch the

call to a Bluetooth headset or hands-free car kit or

back to the phone.

/Normal: turn on the Speakerphone

•

Phonebook: access the contact list.

End held call: disconnect the call currently on

hold.

•

Menu: access the phone's menu functions.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

Menu functions

All menu options listed

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

Call log (Menu 1)

Select one: select one of multi-party call

participants. You can then use the following

options:

Use this menu to view the calls you have dialled,

received, or missed, and the length of calls. You can

also check the cost of your calls, if your SIM card

supports this function.

Private: have a private conversation with one

multi-party call participant. The other participants

can converse with each other. After the private

conversation, select Join to return to the

multi-party call.

To access this menu, press <Menu> in Idle mode and

select Call log

Recent contacts (Menu 1.1)

Remove: disconnect one multi-party call

participant.

This menu displays the most recent calls dialled,

received, or missed.

Accessing a call record

1. Press [Left] or [Right] to move to another call

type.

2. Press [Up] or [Down] to scroll through the call list.

3. Press [ ] to view the details of a call, or [ ] to

dial a number.

Received calls (Menu 1.4)

This menu displays the most recent calls you have

received.

Using call record options

While viewing call details, press <Options> to access

the following options:

Delete all (Menu 1.5)

Use this menu to delete all of the records in each call

type.

•

Call: edit the number and dial it.

Save contact: save the number to Phonebook.

1. Press [ ] to select the call types to be cleared.

2. Press <Delete>.

Send message: send an SMS or MMS message to

the selected number.

3. Press <Yes> to confirm the deletion.

•

Delete: delete the selected call record or all

records.

Call time (Menu 1.6)

Missed calls (Menu 1.2)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

This menu displays the most recent calls you did not

answer.

•

Last call time: check the length of your last call.

Dialled calls (Menu 1.3)

Total dialled calls: check the total length of all

the calls you have dialled.

This menu displays the most recent calls you have

dialled.

•

Total received calls: check the total length of all

the calls you have received.

Menu functions

To reset the call timers, press <Reset>. You need to

enter the phone password.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

The password is preset to 00000000. You can

change this password.ꢀp. 93

Call cost (Menu 1.7)

To access this menu, press <Menu> in Idle mode and

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

select Phonebook

Contact list (Menu 2.1)

Use this menu to search for numbers in Phonebook.

•

Last call cost: check the cost of your last call.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max. cost, you must reset the counter before

you can make another call.

2. Select the name from the list.

•

Max. cost: check the maximum cost limit set in

3. Scroll to a number and press [ ] to dial, or press

Set max. cost

[

] to edit contact information.

•

Reset counters: reset the cost counters.

Using Phonebook options

Set max. cost: set the maximum cost authorised

for your calls.

While viewing contact details, press <Options> to

access the following options:

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

•

Edit: edit contact information.

•

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

•

Ringtone: assign a ringtone to alert you to a

call from the person.

Group: assign the number to a caller group.

Memo: add a memo about the person.

•

Copy to: copy the contact to the phone’s memory

or to the SIM card.

3. Press <Save> to save the contact.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Storing a number on the SIM card

1. Select SIM

Delete: delete the selected contact.

2. Enter information about the contact.

Add new contact (Menu 2.2)

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Use this menu to add a new contact to Phonebook.

Storing a number in the phone’s memory

To assign a caller ID image or video, ringtone, or

group, the contact must be saved to the phone’s

memory.

1. Select Phone

2. Change the settings or enter information about the

contact.

3. Press <Save> to save the contact.

•

First name

Mobile Home

number in any type.

Last name: assign a name.

Office Fax Other: add a

Group (Menu 2.3)

Use this menu to organise your contacts in caller

groups.

•

Email: assign an e-mail address.

Caller ID: assign an image or video to alert

you to a call from the person.

Menu functions

•

Delete: delete the selected group or all groups.

Group members, however, will not be deleted from

Phonebook.

Creating a new caller group

1. Press <Options> and select Add

2. Enter a name for the group.

3. Select the caller ID line and set an image or video.

4. Select the ringtone line and set a melody.

5. Press <Save> to save the group.

Speed dial (Menu 2.4)

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Adding members to a caller group

1. Select a group.

Assigning speed dial numbers

1. Select a key location from

for your voicemail server.

. Key

is reserved

2. Press <Add>.

2. Select a contact from the contact list.

3. Press [ ] to select the contacts to be added.

4. Press <Select>.

3. Select a number, if the contact has more than one

number.

Managing caller groups

Managing speed dial entries

While viewing the group list, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

View: display the members of the selected group.

Add: add a new group.

•

Add: assign a number to an unassigned key.

View: check the name and number assigned to a

key.

Edit: change the group properties.

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

•

Change: assign a different number to a key.

•

Remove: clear the speed dial setting for a key.

Own number (Menu 2.6)

Dialling speed dial entries

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

In Idle mode, press and hold the appropriate key.

My name card (Menu 2.5)

Use this menu to create a name card and send it to

other people.

Management (Menu 2.7)

Use this menu to manage Phonebook entries.

Saving your name card

•

Saving location: select a default memory location

for saving contacts. If you select Always ask, the

phone will ask you to select a memory location

each time you save a number.

The procedure for creating your name card is the

same as the one for saving a phone number in the

phone’s memory.ꢀp. 35

•

Copy all to: copy all of the contacts stored on the

SIM card to the phone’s memory, or vice versa.

Using name card options

After saving your name card, press <Options> to

access the following options:

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or both.

•

Edit: edit the name card.

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

•

Exchange contact details: exchange name cards

with another person via Bluetooth.

Delete: delete the name card.

Menu functions

Service number (Menu 2.8)

MP3 player (Menu 3.1)

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

Use this menu to enjoy music. First, you need to save

music files into your phone’s memory or on a memory

card. You can play MP3, AAC, and M4A files from the

phone’s memory, and MP3 files from the memory card.

To enjoy high quality music, you can use an optional

Bluetooth stereo headset.

1. Scroll to the number you want and press <View>.

2. Press <Dial> or [ ].

Normal headsets are not compatible with the MP3

player.

Downloading or receiving music files

Applications (Menu 3)

Use these methods to save music files to your phone’s

memory:

Use this menu to play music files, play Java games, or

edit photos. You can also use convenient features,

such as a voice command, voice recorder, alarm clock,

calculator, converter, and stopwatch.

•

Download from the wireless web

ꢀp. 49

Download from a computer using the optional

Samsung PC Studio

Guide

ꢀSamsung PC Studio User’s

To access this menu, press <Menu> in Idle mode and

select Applications

•

Via an active Bluetooth connection

Copy to a memory card and insert the card into the

phone. p. 25

The downloaded or received files are stored in the

Music folder. p. 69

ꢀp. 92

•

ꢀ

Creating a play list

1. From the MP3 player screen, press <Options

Key

Function

Down

Stops playback.

and select Add music from

card

2. Press [ ] to select the files to be added and press

Select>.

→

Phone or Memory

Adjusts the volume level.

Turns 3D sound on or off.

Changes the playback animation.

Changes the repeat mode.

Changes the equaliser mode.

Changes the skin type.

Turns Shuffle mode on or off.

3. Press <Back> to return to the MP3 player screen.

Playing music files

1. From the MP3 player screen, press <Options

and select Play

2. Select Phone to use the phone speaker.

Select A/V headset to use a Bluetooth headset,

and then search for and connect to the headset.

Using MP3 player options

During playback, use the following keys:

From the MP3 player screen, press <Options> to

access the following options:

Key

Function

•

Play/Pause: begin or pause playback.

Pauses or resumes playback.

Moves back to the previous file.

Skips to the next file.

Opens the play list.

Transfer to phone: switch the sound output to

the phone speaker.

Left

Right

•

Open: access the play list of the current album or

album list. On the album list, you can set up

multiple albums.

Menu functions

•

Go to Music: access the Music folder.

•

Details: access the file properties.

•

Send via: send the file via e-mail or Bluetooth.

Key management: manage the licence keys you

have acquired.

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Accessing the play list

•

Activate key: get a licence key when the key for

the selected DRM files expires.

From the MP3 player screen, press [Up].

Press <Options> to access the following options:

Remove from playlist: remove the selected file

from the play list.

•

Play: play the currently selected file.

Add music from: add files to the play list.

Go to album list: access the album list.

Move to: move the selected file to another album.

Copy to: copy the selected file to another album.

Settings: change the default settings for playing

music files.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music at

random.

Move track in playlist: move the selected file to

the position you want within the play list.

MP3 overrides other sounds: set the MP3 player

to continue playback even if you exit it.

•

Activate key: get a licence key when the key for

the selected DRM file expires.

Equaliser: select an equaliser setting.

3D sound: turn 3D sound on or off.

Visualisation: change the playback animation.

Skin: select a skin type.

Remove: remove the selected file or all files from

the play list.

•

Details: access the file properties.

Key management: manage the licence keys you

have acquired.

Volume: select a volume level.

2. Speak into the microphone.

Playing MP3 files with the phone closed

Press and hold [ ] to launch the MP3 player. Use the

following keys to control the MP3 player:

Press [ ] to pause or resume recording.

3. Press <Stop> or [Down] to end recording. The

voice memo is saved automatically.

Key

Function

4. Press [ ] to review the voice memo, or [Up] to

record a new memo.

Begins or pauses playback. Close the MP3

player when held down.

Playing a voice memo

1. From the Voice recorder screen, press <Options

Moves back to the previous file.

Skips to the next file.

and select Go to voice recorder files

2. Select a voice memo.

Adjusts the volume.

During playback, use the following keys:

Locks the exposed keys when held down

to keep accidental presses from affecting

playback.

Key

Function

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Left

Right

Voice recorder (Menu 3.2)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Recording a voice memo

1. Press [ ] to start recording.

Down

Stops playback.

Menu functions

4. Press <Done>.

Changing the recording mode

5. Press <Options> and select Save as

You can change the recording mode of the voice

recorder. The maximum recording time is determined

by this setting. Before recording a memo, press

6. Enter a new file name and press <OK>.

Transforming

1. Select a photo or take a new photo.

<Options> and select Settings

→

a recording mode:

•

Limit for multimedia message: record a voice

memo for adding to an MMS message.

2. Press <Options> and select Transform

→

option:

•

Limit for email: record a voice memo for adding

to an e-mail.

•

Resize: change the photo size.

Rotate: rotate the photo 90 degrees.

Flip: flip the photo.

Maximum 1 hour: record a voice memo of up to

one hour.

3. Press <Done>.

Image editor (Menu 3.3)

4. Press <Options> and select Save as

Use this menu to edit your photos using various

editing tools.

5. Enter a new file name and press <OK>.

Cropping

1. Select a photo or take a new photo.

Applying an effect

1. Press <Options> and select New image

or Take photo

→

Open

2. Press <Options> and select Crop

3. Move the cropping frame to the area of the image

you want.

2. Select a photo or take a new photo.

3. Press <Options> and select Effects

→

an effect

Press <Options> and select Resize to change the

frame size.

option.

4. Press <Options> and select Done

1. Select a photo or take a new photo.

5. Press <Options> and select Save as

2. Press <Options> and select Merge stamp. The

background photo appears in the box next to

6. Enter a new file name and press <OK>.

3. Press <Options> and select Add image

Adding visual features

4. Add a photo by selecting or taking a photo. The

You can decorate photos by adding a frame, an image,

or a note.

added photo appears in the box next to

will be the stamp.

. This

1. Select a photo or take a new photo.

5. Press <Options> and select Merge. The stamp

photo is added to the background photo as an

outline.

2. Press <Options> and select Insert

→

a feature

type.

3. Select an item or enter text to be inserted.

6. Press <Options> to access the following stamp

4. Adjust the position of the inserted item and press

edit options:

Done>.

•

Resize: change the stamp size.

Move: change the position of the stamp.

Rotate: rotate the stamp.

Stamp colour: change the stamp colour.

Shadow on: apply a shadow to the stamp.

5. Press <Options> and select Save as

6. Enter a new file name and press <OK>.

Merging a stamp effect

This editing tool allows you to make an outline stamp

of a photo and then merge it with another photo. You

can use this tool to create your own photo postcard by

taking a photo of a handwritten message and merging

it with a photo.

7. When you have finished, press <Options> and

select Done

8. Press <Options> and select Save as

9. Enter a new file name and press <OK>.

Menu functions

•

Upgrade: upgrade the application to the latest

version.

Java world (Menu 3.4)

Use this menu to access the embedded Java games

and downloaded Java applications.

Send information via SMS: send the URL

containing the application via SMS.

Accessing an embedded game

Memory status: access memory information for

applications.

1. Select My games

→

a game.

2. If necessary, press [ ].

Settings: select a connection profile to be used for

applications requiring network access. You can also

Using Java application options

add or edit a profile.

ꢀp. 93

From the application list, press <Options> to access

the following options:

World clock (Menu 3.5)

•

Start: launch the selected application.

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Move to: move the application to another folder.

Delete: delete the selected application or all

applications, except for the embedded games.

Viewing world time

1. From the world map, press [Left] or [Right] to

scroll to the city you want. As the time line moves,

the time and date of the given zone display.

•

Lock/Unlock: lock the application to protect it

from being deleted, or unlock the application.

•

Details: access the application properties.

2. Press [ ] to save the city as your local time zone.

Permissions: set permission settings for services

charging you additional costs, such as network

access and SMS.

3. Press <Save>.

Applying daylight savings time

1. From the world map, press <Options> and select

Stopping an alarm

Set daylight saving time

•

For a non-wake-up alarm, press any key.

2. Press [ ] to select the time zones you want.

For a wake-up alarm, press <Confirm> or [ ].

3. Press <Save>.

Press any key, except <Confirm> and [ ], to

cause it to sound again after 5 minutes. You can do

this a maximum of 5 times.

Alarm (Menu 3.6)

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

Setting the alarm to ring even if the phone is

off

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

•

AM/PM: select AM or PM in 12-hour format.

Repeat: select a repeat option.

Alarm tone: select an alarm tone.

Menu functions

Name search (Menu 3.7.2)

Voice commands (Menu 3.7)

Use this menu to access a contact by saying any name

that is in Phonebook.

Your phone provides a set of powerful voice-enabled

features that enhance its hands-free capabilities.

You can quickly access this menu by pressing and

holding the right soft key in Idle mode.

Your phone recognises only English, French,

German, Italian, Spanish, and Russian.

The procedures for name searching are the same as

for name dialling.

Name dial (Menu 3.7.1)

Use this menu to make a phone call by saying any

name in Phonebook.

Direct menu (Menu 3.7.3)

1. At the voice prompt, say a name.

Use this menu to access the primary menus, such as

Phonebook and Camera, as well as the Name dial and

Name search menus, directly, by saying the name of

the menu.

Speak into the microphone for best results.

The phone recognises your voice command and

displays the search results.

You can quickly access this menu by pressing and

holding the left soft key in Idle mode.

2. If the phone displays 3 possible results, say “Next”

following the voice prompt until you hear the name

you want.

The procedures for opening menus are the same as for

name dialling.

To go back to the name recited previously, say

“Previous.”

3. Say nothing for 3 seconds or press [ ] and the

phone will dial the currently selected number.

Settings (Menu 3.7.4)

Help (Menu 3.7.5)

Use this menu to customise various settings for the

voice commands feature.

Use this menu to view instructions for the voice

commands feature and customising its settings.

•

Voice commands: enable or disable the voice

commands feature.

Calculator (Menu 3.8)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

Command timeout: set a time limit for your

phone to wait for your voice command.

Result display: set how many candidates the

phone displays for a voice command search.

1. Enter the first number.

•

Press <.()> to insert a decimal point or

bracket.

Voice guides: turn on or off the voice messages

that guide you through the voice command

procedure.

•

Press

[

] or [

]

to move the cursor.

2. Press one of the Navigation keys to access the

math function you want.

•

Guides volume: adjust the volume for the voice

guide messages.

3. Enter the second number.

Sensitivity level: adjust the sensitivity with

which your phone recognises a voice command.

4. Press [ ] to view the result.

Active contact: select Phonebook entries to be

dialled or accessed by voice command.

5. If necessary, repeat from step 2 to continue the

calculation.

Active menus: select menu items to be accessed

by voice command. Selecting a primary menu

displays the submenus which are assigned to the

selected primary menu.

Menu functions

Converter (Menu 3.9)

Timer (Menu 3.10)

Use this menu for common conversions, such as

currency and temperature.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Starting the timer

1. Press <Set>.

3. Enter the value to be converted and press [Down].

2. Enter the length of time you want to count down

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

and press <OK>.

3. Press [ ] to start counting down.

Stopping the timer

4. Press [Left] or [Right] to select the unit to which

you want to convert.

•

Press any key when the timer rings.

•

Press [ ] on the Timer screen to stop the timer

before it rings.

The equivalent value for the amount you entered

displays.

For the currency converter, you can view and set

currency rates by pressing <View rate>.

Stopwatch (Menu 3.11)

Use this menu to measure elapsed time. The

maximum time is 10 hours.

1. Press [ ] to start the stopwatch.

2. Press [ ] to check an interval. You can repeat this

step for a total of 4 intervals.

Key management (Menu 3.12)

Browser (Menu 4)

Use this menu to manage the licence keys you have

acquired to activate media contents locked by DRM

systems.

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

Press <Options> to access the following options:

•

View: open the corresponding media content.

To access this menu, press <Menu> in Idle mode and

Delete: delete the selected licence key.

select Browser

Go to My Messages: access the message

containing the media content.

Home (Menu 4.1)

•

Go to My Items: access the corresponding file

folder.

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [ ] in Idle mode.

Details: access the properties of the licence key.

Navigating the web

SIM AT (Menu 3.13)

This menu is available if you use a SIM AT card that

supports SIM Application Tool kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Press

scroll through browser

items

[Up] or [Down].

select a browser item

[

], or <Options> and

select Go to

Menu functions

•

Bookmarks: bookmark the current page or access

the bookmark list.

Press

return to the previous

page

Send URL: send the URL of the current page via

SMS or e-mail.

and select Go

→

Back.

move to the next page

<Options> and select Go

To DesktopView/To SmartFitView: change the

display mode of the browser.

→

Forward

•

Save: save the selected image or page.

Page details: access the page properties.

Using page options

From any web page, press <Options> to access the

following options:

Browser options: change the various settings for

the browser.

•

Go to: access the linked web page.

Cache: change the cache mode or clear the cache.

The cache is a temporary memory that stores

recently accessed web pages.

Go to homepage: return to the homepage.

Keys to buy: send a request for buying a licence

key for a DRM file. This option will be available only

when you access the web browser from a message

containing a DRM file.

Cookies: change the cookie acceptance mode or

delete cookies. Cookies are pieces of personal

information sent to a web server while navigating

the web.

•

Enter URL: enter a URL address manually.

Go: move backward or forward through pages in

Preferences: change the browser display and

history.

sound settings.

•

Reload: reload the current page with updated

information.

Certificates: access certificate information.

About browser: access version and copyright

information about the browser.

3. Enter a URL address and press <Save>.

Exiting the browser

Press [ ] to end the network connection and exit the

browser.

Accessing a bookmarked page

Selecting a bookmark item launches the web browser

and accesses the associated web page.

Enter URL (Menu 4.2)

Using bookmark options

Use this menu to manually enter a URL address and

access the associated web page.

After saving an item, press <Options> to access the

following options:

You can add the entered URL to the bookmark list by

•

Go to: access the bookmarked web page.

Go to homepage: access the homepage.

Enter URL: enter a URL address manually.

selecting Add bookmark

Bookmarks (Menu 4.3)

Use this menu to save URL addresses in order to

quickly access web pages.

Edit bookmark: edit the URL address and title of

the bookmark.

Adding a bookmark

1. Press <Add>. If a bookmark has already been

•

Add bookmark: add a new bookmark.

Send URL: send the URL address of the bookmark

via SMS or e-mail.

saved, press <Options> and select Add

bookmark

•

Delete: delete the selected bookmark or all

bookmarks.

2. Enter a title for the bookmark and press [Down].

Menu functions

Saved pages (Menu 4.4)

Messaging (Menu 5)

You can access the list of pages you have saved while

online.

Use the Messaging menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message and cell broadcast

message features.

If you select a link on the page, the phone switches to

online to access the linked page.

To access this menu, press <Menu> in Idle mode and

History (Menu 4.5)

select Messaging

You can access the list of pages you have accessed

recently.

Create message (Menu 5.1)

Use this menu to create and send messages.

Select a URL from the list to access the corresponding

web page.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

Clear cache (Menu 4.6)

Use this menu to clear information stored in the cache.

1. Enter your message.

Browser settings (Menu 4.7)

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Use this menu to select a connection profile to be used

for accessing the wireless web. You can also create or

edit a profile.ꢀp. 93

2. Press <Options> to access the following options

1. Select the Subject line.

for creating a message:

2. Enter the message subject and press [ ].

•

Insert: add a template, Phonebook entry, or

bookmark to text.

Add image/Add animation/Add melody:

attach a simple image, an animated image, or

a melody.

Attach: attach a name card or calender data

as a data format attachment.

Text style: change the text attributes.

3. Select the Image and video or Sound line and

add an image, a video, or a sound file.

•

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

4. Select the Message line.

3. When you have finished, press <Options> and

select Save and send or Send only

5. Enter the message text and press [ ].

6. Press <Options> to access the following options

4. Enter a destination number.

for editing the message:

To send the message to more than one recipient,

fill in additional destination fields.

•

Edit: edit the subject or text.

Change image Change video

sound: replace an added item.

/Change

5. Press [ ] to send the message.

•

Add memory card: add a file stored on a

memory card, if inserted.

Add page: add pages. Move to each page by

pressing [Left] or [Right].

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

Menu functions

•

Delete page: delete an added page.

1. Select the Subject line.

Edit page: change the duration of page display

or move the page forward among the other

pages.

Attach: attach a Phonebook entry as a name

card or calender data as a data format

attachment, or a document file stored in the

Other files folder.

2. Enter the subject of your e-mail and press [ ].

3. Select the Message line.

4. Enter the e-mail text and press [ ].

•

5. Select the File attached line and select one of the

following options to add files:

•

Add image/Add video/Add sound/Add

music: add media files stored in the phone’s

•

Remove subject

Remove media Remove sound

remove an added item.

7. When you have finished, press <Options> and

select Send

Remove message

memory.

/Remove:

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

Other files: add document files stored in the

Other files folder.

Memory card: add files stored on a memory

card, if inserted.

Attach: attach Phonebook entries as name

cards or calender data as data format

attachments.

8. Enter a phone number or an e-mail address.

To send the message to more than one recipient,

fill in additional destination fields.

9. Press [ ] to send the message.

Email (Menu 5.1.3)

You can create and send e-mails that include text,

audio, and images.

6. Press <Options> to access the following options

Viewing a message

to edit the e-mail:

The following icons may appear on the message list to

show the message type:

•

Edit: edit the subject or text.

Remove subject Remove message: clear

the subject or text.

•

SMS

MMS

•

Remove attachment: delete the selected

attachment.

Remove all attachments: delete all

attachments.

MMS notification ( : Being retrieved,

: Failed to retrieve)

•

Voicemail

Push message from web servers or

Configuration message, containing network

parameters from your service provider

7. When you have finished, press <Options> and

select Send

8. Enter an e-mail address.

•

CB (Cell broadcast) message from your

service provider

To send the e-mail to more than one recipient, fill

in additional destination fields.

Delivery report for your sent messages

9. Press [ ] to send the e-mail.

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

My messages (Menu 5.2)

Use this menu to access messages you have received,

sent, or which have failed in sending.

• A

icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

Inbox (Menu 5.2.1)

This folder stores all of the messages you have

received, except for e-mails.

Menu functions

Using message options

MMS messages/MMS notifications

•

Retrieve: retrieve the MMS message from the

MMS server.

While viewing a message, press <Options> to access

the following options:

Reply via text message: reply to the sender via

SMS.

SMS messages

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

Reply via multimedia message to: reply to the

sender via MMS.

•

Forward: forward the message to other people.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Delete: delete the message.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Copy media: save media content from the

message to your phone’s memory.

Copy media: save media content from the

message to your phone’s memory.

Protection: protect the message from being

deleted.

Protection: protect the message from being

deleted. You can protect only those messages

stored in the phone’s memory.

Details: access the message properties.

Configuration messages

•

Block number: add the sender’s number to the

Block list to reject the messages from the sender.

•

Install: apply the configuration specified in the

message to your phone.

•

Delete: delete the message.

•

Protection: protect the message from being

deleted.

Drafts (Menu 5.2.2)

This folder stores messages you have saved to send at

a later time.

Push messages

•

Go to URL: connect to the URL specified in the

message.

When you select a message, it opens in Edit mode so

that you can edit and send the message.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Delete: delete the message.

Protection: protect the message from being

deleted.

The following icons are available to show the message

status:

CB messages

•

Being sent

•

Save: save the message to the phone’s memory.

Failed to send

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

While viewing a message, press <Options> to access

the following options:

•

Delete: delete the message.

•

Send again: retry sending the message.

Delivery reports

Forward: forward the message to other people.

•

Copy entry: extract URL, e-mail addresses, or

phone numbers from the report.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Delete: delete the message.

•

Delete: delete the message.

Protection: protect the report from being deleted.

Menu functions

•

Protection: protect the message from being

deleted.

for new mail. The phone checks the e-mail server

and downloads new e-mails.

•

Details: access the message properties.

The following icons may appear on the list to show

the e-mail status:

Sent messages (Menu 5.2.4)

•

Retrieved from the server

Being retrieved

Failed to retrieve

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

icon next to a message means that the

•

Forward: forward the message to other people.

message is of high priority. A grey-coloured

message icon indicates low priority.

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the message.

3. Select an e-mail or a header.

•

Delete: delete the message.

4. Press [Left] or [Right] to view other pages in the

e-mail.

Protection: protect the message from being

deleted.

5. Press [ ] or [ ] to view the previous or next

e-mail.

•

Details: access the message properties.

Email inbox (Menu 5.2.5)

Using e-mail options

This folder stores e-mails that you have received.

Viewing an e-mail

While viewing the e-mail or header, press <Options

to access the following options:

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

1. Select an e-mail account.

2. Press <Yes> when Check for new email

displays, or press <Options> and select Check

•

Reply: send a reply to the sender or to the sender

and all of the other recipients.

Using folder options

On the folder list, press <Options> to access the

following options:

•

Forward: forward the e-mail to other people.

Delete: delete the e-mail.

•

Open: open the selected folder.

Add folder: add a new folder.

Add to filtering list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

Rename folder: change the folder name.

Delete: delete the selected folder.

•

Copy entry: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

Templates (Menu 5.3)

Use this menu to make and use templates of

frequently used messages.

Copy media: save the attached files from the

e-mail to your phone’s memory.

Text templates (Menu 5.3.1)

•

Protection: protect the e-mail from being deleted.

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS message.

Details: access the e-mail properties.

My folders (Menu 5.2.6)

Use this menu to create new folders and organise your

messages.

Creating a template

1. Select an empty location.

2. Enter a message and press <OK>.

Creating a new folder

1. Press <Yes>.

2. Enter a folder name and press <OK>.

Menu functions

Using template options

Delete all (Menu 5.4)

From the template list, press <Options> to access

the following options:

Use this menu to delete messages in each message

folder all at once.

•

Edit: edit the selected template.

1. Press [ ] to select the message folders to be

cleared.

Send message: create and send a new message.

Delete: delete the selected template.

Add new: add a new template.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

2. Press <Delete>.

Multimedia message templates (Menu 5.3.2)

3. Press [ ] to select the check box to delete

You can access embedded MMS templates or ones you

have saved so that you can use them when composing

an MMS message.

protected messages, and then press <Yes>.

4. Press <Yes> to confirm the deletion.

From the template list, press <Options> to access

the following options:

Settings (Menu 5.5)

Use this menu to set up various options for using the

messaging service.

•

View: open the selected template.

Edit: edit the template.

Text message (Menu 5.5.1)

Send: create and send a new message.

You can configure SMS settings.

Delete: delete the selected template or all

templates, except for the embedded ones.

•

Send settings: set up the options for sending

SMS messages:

Reply path: allow recipients to reply to you

through your SMS server.

Delivery report: set the network to inform you

when your messages have been delivered.

•

Profile settings: set the properties of each

profile.

Character support: select a character encoding

type. If you select Automatic, the phone switches

the encoding type from GSM-Alphabet to Uni-Code

if you enter a Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half. If this menu

is not shown, your phone provides automatic

character encoding by default.

Service centre: store or change the number of

your SMS server.

Default destination: enter the default

destination. It will be automatically entered on the

recipient list.

Default type: set the default message type. The

network can convert the messages into the

selected format.

Bearer selection: select either GSM or GPRS

preferred, depending on your network.

Default validity: set the length of time your

messages are stored in the SMS server.

•

Receive settings: activate 3D vivid view mode for

displaying received SMS messages on your phone.

The phone will convert message text to 3D vivid

graphics and displays it in 3D view mode. This

option is available only when the message consists

of a single page.

Setting name: enter a profile name.

Multimedia message (Menu 5.5.2)

You can configure MMS settings.

•

Sending settings: set up the options for sending

MMS messages:

•

Block number: store the phone numbers from

which you want to reject messages.

Delivery report: set the network to inform you

when your messages have been delivered.

Current profile: check or select an SMS setting

profile.

Hide address: set your address to be hidden from

the recipient’s phone.

Menu functions

Read reply: send a read-reply request along with

your messages.

Reception when abroad: determine if your

phone retrieves new messages automatically when

you are roaming on another network.

Priority: set the priority level of messages.

Reception within home network or abroad has the

following options:

Expiry date: set the length of time messages are

stored in the MMS server.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Delivery time: set a time delay before messages

are sent.

Outgoing message size: select a maximum size

of attached items allowed for messages.

Automatic: the phone automatically retrieves

messages from the server.

•

Retrieve settings: set up the options for

receiving MMS messages:

Reject: the phone rejects all messages.

•

Profile: select a connection profile to be used for

MMS. You can also create or edit a profile. p. 93

Reject unknown senders: reject messages from

unknown senders.

ꢀ

Allow adverts: accept advertisements.

Email (Menu 5.5.3)

Allow information: accept information

messages.

You can configure default e-mail settings.

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

Allow reports: set the network to inform the

sender when a message has been delivered to you.

•

Sending settings: set up the options for sending

e-mails:

Recep. in home network: determine if your

phone retrieves new messages automatically when

you are in your home service area.

Send copy to self: send a copy of your e-mails to

your e-mail account.

select Do not notify, use the Check for new

email option to receive new e-mails manually.

Delivery receipt: set the network to inform you

when your e-mails have been delivered.

Read reply: determine whether or not the phone

sends a read-reply for incoming e-mails. If you

select Reply reminder, the phone asks you to

send a read-reply.

Read reply: send a read-reply request along with

e-mails.

Reject if larger than: determine the maximum

size for incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Reply-To address: set an e-mail address to

receive read-reply messages from recipients.

Priority: select the priority level of e-mails.

Download method: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Include signature: attach your name, phone

number, a simple memo, or a tag line to your

e-mails.

Leave copy of messages on server: leave

copies of e-mails on the e-mail server after

retrieving.

Edit name: edit the name in your signature.

Edit number: edit the phone number in your

signature.

•

Block list: specify e-mail addresses or subjects

you want to reject.

Edit note: edit the tag line in your signature.

•

Reception settings: set up the options for

receiving e-mails:

Email account: set up an e-mail account and

select an account to be used.

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

Current account: check or select an account.

Menu functions

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Password: enter the POP3 password.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

Account name: enter a name for the currently

selected account.

Same as POP3: select if you want the SMTP

server to have the same parameters as the POP3

server.

User name: enter a user name.

Email address: enter your e-mail address.

SMTP user ID: enter the SMTP user name.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

SMTP password: enter the SMTP password.

SMTP port: enter the SMTP port number.

APOP login: connect to the server by using the

APOP login scheme.

Connect to POP3(IMAP4) server first:

connect to the POP3 or IMAP4 server before

connecting to the SMTP server to send e-mails.

Secure connection: use a secure connection for

the e-mail service.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

When the protocol type is IMAP4:

IMAP4 server: enter the IP address or host

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

User ID: enter the IMAP4 user name.

Password: enter the IMAP4 password.

When the protocol type is POP3

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

User ID: enter the POP3 user name.

Use SMTP authentication: enable SMTP

authentication, which requires the user to login

before sending e-mails.

•

Receive: set how your phone receives push

messages. If you select Black list, the phone will

not accept messages from the specified addresses

on the Black list.

Same as IMAP4: select if you want the SMTP

server to have the same parameters as the

IMAP4 server.

Black list: manage blocked server addresses.

Broadcast (Menu 5.5.5)

SMTP user ID: enter the SMTP user name.

You can change the settings for receiving CB

messages.

SMTP password: enter the SMTP password.

Include attachments: select this option to

receive attachments with e-mails.

•

Receive: select to receive CB messages, or not.

Channel list: indicate the channels from which

you wish to receive CB messages. Please contact

your service provider for further details.

Email retrieval limit(1-100): set the number

of headers you will retrieve from the server.

Secure connection: use a secured connection

for e-mail service.

•

Language: select the preferred languages in

which CB messages display.

•

Email profile: select a connection profile to be

Memory status (Menu 5.6)

used for e-mail services. You can also create or

edit a profile.ꢀp. 93

Use this menu to view the amount of memory

currently in use in each message folder.

Push message (Menu 5.5.4)

You can change the settings for receiving push

messages from the wireless web server.

Menu functions

Your service provider supports only count-based or

unlimited-access DRM files.

File manager (Menu 6)

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory or on a memory card.

Images (Menu 6.1)

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from a computer.

To access this menu, press <Menu> in Idle mode and

select File manager

Tips for Digital Rights Management

Viewing an image

1. Select an image folder.

2. Select an image.

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a licence

key to access them.

Viewing a slide show

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

You can acquire the key from the website which owns

the rights to the content; use the Activate key

option.

1. Select Photos

2. Press <Options> and select Slide show

Note the following icons on the list:

3. Select an interval option.

The slide show begins.

•

: Forwardable item with a valid key.

: Forwardable item without a valid key.

: Unforwardable item with a valid key.

: Unforwardable item without a valid key.

4. Press <Stop> to stop the slide show.

•

Protection: protect the file from being deleted.

Using image options

Print via Bluetooth: print the file by connecting

the phone to a printer via Bluetooth.

While viewing an image, press <Options> to access

the following options:

•

Details: access the file properties.

•

List: return to the image list.

Key management: manage the licence keys you

have acquired.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the image as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

Printing an image

You can print images via Bluetooth.

1. Select an image.

Activate key: get a licence key when the key for

the selected DRM file expires.

2. Press <Options> and select Print via Bluetooth

Edit: edit the image using the Image editor if it is

a photo taken by the camera on the phone.

3. Select a Bluetooth printer.

ꢀp. 91

4. Press <OK> to print it.

ꢀp. 42

To cancel printing, press <Cancel>.

•

Delete: delete the file.

Rename: change the file name.

Viewing an image on a TV

Move to: move the file to another folder or to a

memory card.

You can use a TV to view the images you have stored.

You first need to set the video system for your TV in

•

Copy to memory card: copy the file to a memory

card.

the TV-out settings menu.ꢀp. 85

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

Menu functions

1. With the TV switched on, connect your phone to

the TV with the TV out cable, as shown.

Videos (Menu 6.2)

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

a computer.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

• Depending on your particular TV model, the

location and shape of the video input and

audio output ports may vary. Match cable

connector and TV port colours.

During playback, use the following keys:

Key

Function

• Do not plug in connectors with a wet hand.

Pauses or resumes playback.

2. Switch the TV to External Input mode.

Left

Moves back to the previous file. Moves

backward in a file when held down.

The display switches to TV Out mode and you can

view the phone’s display on the TV screen.

Right

Skips to the next file. Moves forward

in a file when held down.

3. Select a photo in the Photos folder.

Depending on the video’s system, the image

vibrates or in some other may be less than

optimal.

Adjusts the volume.

Stops playback.

Down

•

Details: access the file properties.

Using video options

Key management: manage the licence keys you

have acquired.

After playback, press <Options> to access the

following options:

•

List: return to the video list.

Viewing a video clip on a TV

Send via: send the file via MMS, e-mail, or

Bluetooth.

You can use a TV to view the video clips you have

stored.ꢀp. 67

•

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the main display or as a caller ID

image for a Phonebook entry.

Music (Menu 6.3)

This menu displays MP3 files you have downloaded or

imported from a computer.

Activate key: get a licence key when the key for

the selected DRM file expires.

Select a file. The MP3 player opens.

ꢀp. 39

•

Delete: delete the file.

When you play a file from this menu, without first

adding it to the play list in the MP3 player,

backround play is not supported.

Rename: change the file name.

Move to: move the file to another folder or to a

memory card.

Sounds (Menu 6.4)

•

Copy to memory card: copy the file to a memory

This menu displays voice memos you have recorded,

and sound files you have downloaded, received in

messages, or imported from a computer.

card.

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

Protection: protect the file from being deleted.

Menu functions

•

Visible to Bluetooth: share the files with other

Bluetooth devices.

Playing a sound clip

1. Select a sound folder.

•

Protection: protect the file from being deleted.

2. Select a sound clip. For a voice memo, see Voice

recorder.ꢀp. 41

Details: access the file properties.

Key management: manage the licence keys you

have acquired.

Using sound options

From a sound screen, press <Options> to access the

following options:

Other files (Menu 6.5)

•

List: return to the sound list.

Use this menu to view various document files and files

stored in the phone’s memory without corruption.

Available file formats are DOC, XLS, PPT, PDF, and TXT.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the file as your ringtone or as a

ringtone for a Phonebook entry.

Viewing a file

Select a file. Picsel File Viewer runs to open the

document.

Activate key: get a licence key when the key for

the selected DRM file expires.

• Depending on the file size or memory capacity of

Picsel File Viewer, a file may not open properly.

• If a document file contains languages

unsupported by Picsel File Viewer, the content of

the document will not display correctly.

•

Delete: delete the file.

Rename: change the file name.

Move to: move the file to another folder or to a

memory card.

•

Copy to memory card: copy the file to a memory

card.

Use the following keys to view the document:

•

Full screen view/Normal view: change the

display to Full screen view or Normal screen view.

Key

Function

•

Zoom: zoom in or out.

Up/Down/

Left/Right

Pans around the page.

Fit to: fit the document to the page size, screen

width, or screen height.

Fits the document to the page size.

Zooms in.

•

Go to: move to another page of the document.

Rotate: rotate the document.

Screen panning

panning mode to by screen or by preset pixel.

Show controller Hide controller: show or hide

/Normal panning: change the

Returns to the first page.

Zooms out.

•

Returns to the previous page.

Rotates the document.

Moves to the next page.

Moves to the last page.

the shortcut tool bar of the file viewer.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Move to memory card: move the file to a

memory card.

Changes the display to Full screen

view or Normal screen view.

Copy to memory card: copy the file to a memory

card.

•

Delete: delete the selected file.

Using document options

Rename: change the file name.

While viewing a document, press <Options> to

access the following options:

Visible to Bluetooth: share the file or all files

with other Bluetooth devices.

Menu functions

•

Protection: protect the file from being deleted.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

•

Details: access the file properties.

Shortcuts: view the functions of the keys you can

use in Picsel File Viewer.

To access this menu, press <Menu> in Idle mode and

select Calendar

Memory card (Menu 6.6)

Use this menu to access the files stored in a memory

card. This menu is shown only when a memory card is

inserted into the phone.

Consulting the calendar

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Your phone is preset to use FAT16-formatted

memory cards. If you insert a FAT32-formatted

memory card, the phone will ask you to reformat the

memory card. If you do not, you will not be able to

access the card from the phone.

Selecting a day

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Press [ / ] to move by month.

Memory status (Menu 6.7)

Using calendar options

Use this menu to view memory information for media

items in the phone’s memory or on a memory card.

For the phone’s memory, press [Left] or [Right] to

view the memory status by size or number of items.

Press <Options> to access the following options:

•

View mode: change the view mode of the

calendar. p. 75

Create: add a new event.

ꢀ

•

ꢀ

next section

•

Go to: select today’s date or enter a specific date.

•

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: enter information about the event

location.

Alarm: set an alarm for the event.

Before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: set the event to recur and select a

repeat option.

Sort by: sort items by type of event.

Delete: delete the items stored on the calendar by

using various deleting options.

You can delete recurring events in Day view only.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: access memory information for

the event items stored on the calendar.

•

Creating an event

You can store scheduled events, anniversaries,

memos, and To do items on the calendar. More than

one event per day can be stored.

•

Entering a new scheduled event

1. Select a date on the calendar.

•

Until: set the ending date, if the event will

recur.

2. Press <Options> and select Create

→

Schedule.

4. Press <Save> to save the event.

3. Enter information or change the settings:

•

Subject: enter a title for the event.

Details: enter event details.

Menu functions

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a memo

1. Select a date on the calendar.

2. Press <Options> and select Create

3. Enter a memo and press <Save>.

→

Memo.

Anniversary

3. Enter information or change the settings:

Entering a To do item

1. Select a date on the calendar.

2. Press <Options> and select Create

•

Occasion: enter information about the

anniversary.

To do

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

3. Enter information or change the settings:

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

•

Before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

ring.

AM/PM: select AM or PM in 12-hour time

format.

Select priority: select a priority level.

4. Press <Save> to save the event.

Viewing an event

•

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

Once you have scheduled events, the event icons and

the number of events for a specific day appears at the

bottom of the calendar.

4. Press <Save> to save the event.

•

Scheduled event

To do item

•

Anniversary

Memo

Accessing an event

Viewing an event in a different mode

1. Select a date on the calendar to display the events

for the day.

You can change the calendar display to Day view or

Week view. Press <Options> and select View mode

2. Select an event to view its details.

→

a view mode.

3. Press [Left] or [Right] to access the other events

scheduled for the selected day.

Day view

You can view events for the selected date. Select an

event to view its details.

Using event options

While viewing an event, press <Options> to access

the following options:

The following icons may display to indicate the event

status:

•

Edit: edit the event.

•

Alarm set

Create: add a new event.

Recurring event

Send via: send the event via SMS, MMS, e-mail,

or Bluetooth.

To do item priority (Red: high, Blue: normal,

Grey: low)

•

View mode: change the view mode of the

calendar.

•

Completed To do item

Week view

•

Delete: delete the event.

You can view events for the selected week. A cell on

the timetable indicates the presence of a schedule

item. Select a cell in the day you want.

Memory status: access memory information for

the events stored on the calendar.

Menu functions

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 77

3. Press [ to take a photo. The photo is saved in

the Photos folder.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

ꢀ

•

ꢀ

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

]

in Idle mode.

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

4. To

Press

Options>.ꢀp. 79

access photo options

delete the photo

[C] and then <Yes>.

return to Capture mode

<Preview>.

Taking a photo

Using camera options in Capture mode

You can take photos in various modes. The camera

produces JPEG photos.

In Capture mode, press < > to access the following

options:

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

•

Record video: switch to Record mode.

Shooting mode: take a photo in the following

modes:

1. Access the Camera menu or press and hold [

]

to turn on the camera.

Single shot: take a photo in normal mode. You

can select whether or not the camera automatically

saves a photo.

2. Adjust the image to be captured.

Multi-shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

White balance: adjust the colour balance of the

image. You can make your photo appear warmer

or cooler.

Mosaic shot: take several stills and save them in

one frame. You can select the layout.

•

Effects: change the colour tone or apply a special

effect.

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

select a higher ISO number. The higher the ISO

number, the faster the camera shutter functions

and the more sensitive the camera is to light.

Higher ISO settings may bring some distortion to

an image.

•

Frames: apply a decorative frame.

Flash: determine the use of the flash.

Timer: set a time delay before the camera takes a

photo.

•

Go to photos: access the Photos folder.

•

Shortcuts: view the functions of the keys you can

use in Capture mode.

Settings: change the default settings for taking a

photo.

Using the keypad in Capture mode

Size: select an image size.

You can use the keypad to customise your camera

settings in Capture mode.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Shutter sound: select the sound that you hear

Key

Function

when you press the shutter release, [

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Zoom sound: turn the sound effect for zooming

on or off.

Menu functions

Using voice commands in Capture mode

Key

Function

You can use voice commands to customise your

camera settings in Capture mode.

Flips the image vertically.

Shows the mirror image.

Switches to Record mode.

Changes the image size.

Your phone recognises only English, French,

German, Italian, Spanish, and Russian.

ꢀp. 80

1. In Capture mode, press [ ] to activate the voice

commands feature.

Changes the image quality.

Changes the shooting mode.

2. After the voice prompt, say the following voice

commands for camera settings:

Changes the colour tone or applies a

special effect.

Say

zoom in or out

Zoom in, Zoom in max,

Changes the ISO setting.

Selects a decorative frame.

Sets the timer.

Zoom out, or Zoom out max.

apply a special

effect

Gray scale, Negative, Sepia,

Antique, Moonlight, Fog, or

Effect none.

Goes to the Photos folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

use the flash

Flash shooting only, Flash

permanent, or Flash off.

Using photo options

Say

After saving a photo, press <Options> to access the

following options:

set the timer

Timer three seconds, Timer

five seconds, Timer ten

seconds, or Timer off.

•

View: access one of the multi-shot photos.

Take another: return to Capture mode.

change the image

size

Size up or Size down.

Send via: send the file via MMS, e-mail, or

Bluetooth.

change the image

quality

Quality normal, Quality

economy, Quality fine, or

Quality super fine.

•

Set as: set the photo as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

Edit: edit the photo using the Image editor.

ꢀ

p. 42

change the preview

screen

Full screen, Standard ratio,

Full screen guideline,

or Full screen indicator.

•

Delete: delete the file.

Rename: change the file name.

Go to photos: access the Photos folder.

ꢀ

p. 66

For example:

Protection: protect the file from being deleted.

•

To zoom in, say “Zoom in.”

Print via Bluetooth: print the file by connecting

the phone to a printer via Bluetooth.

To increase the image size, say “Size up.”

To turn the flash off, say “Flash off.”

ꢀp. 67

•

Details: access the file properties.

Menu functions

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 81

Taking a photo with the phone closed

ꢀ

1. Press and hold [

2. If necessary, press [

] to highlight

ꢀ

3. To

Press

[ ].

3. Press [

4. Press [

]

to start recording.

or < > to stop recording. The video is

flip the image vertically

show the mirror image

turn the flash on or off

adjust the brightness

zoom in or out

automatically saved in the Video clips folder.

[ ].

5. To Press

and hold [ / ].

play back the video clip

access video options

delete the video clip

return to Record mode

[

Options>.ꢀp. 82

] and then <Yes>.

4. Press [

]

to take a photo. The photo is

Preview>.

automatically saved.

Using camera options in Record mode

Recording a video

In Record mode, press < > to access the following

options:

You can record a video of what is displayed on the

camera screen and save it.

•

Take photo: switch to Capture mode.

1. In Capture mode, press [

1].

Effects: change the colour tone or apply a special

effect.

2. Adjust the image to be captured.

•

Flash: determine the use of the flash.

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Timer: set a time delay before the camera starts

recording.

White balance: adjust the colour balance of the

image. You can make your video appear warmer or

cooler.

•

Go to videos: access the Video clips folder.

Settings: change the following settings for

recording a video:

•

Shortcuts: view the functions of the keys you can

use in Record mode.

Recording mode: select a video recording mode.

Using the keypad in Record mode

Select Limit for MMS/Wallpaper/Caller ID to

record a video suitable for messaging or for setting

as wallpaper or caller ID image. The video clip is

saved in 3GP format.

You can use the keypad to customise your camera

settings in Record mode.

Key

Function

Select Normal to record a video within the limit of

the currently available memory. The video clip is

saved in MP4 format.

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Size: select a frame size.

Flips the image vertically.

Shows the mirror image.

Quality: select an image quality setting.

Viewfinder: select a preview screen.

Audio record: record audio with a video clip.

Switches to Capture mode.

ꢀp. 76

Zoom sound: turn the sound effect for zooming

on or off.

Changes the frame size.

Menu functions

•

Set as: set the video clip, if saved as a 3GP file, as

wallpaper for the main display or as a caller ID

image for a Phonebook entry.

Key

Function

Changes the image quality.

•

Delete: delete the file.

Changes the video recording mode.

Rename: change the file name.

Changes the colour tone or applies a

special effect.

Go to videos: access the Video clips folder.

ꢀp. 68

Mutes or unmutes audio.

Sets the timer.

•

Protection: protect the file from being deleted.

Details: access the file properties.

Goes to the Video clips folder.

Changes the preview screen.

Determines the use of the flash.

Changes the white balance.

Recording a video with the phone closed

1. Press and hold [

2. If necessary, press [

] to highlight

3. To

Press

[ ].

flip the image vertically

show the mirror image

turn the flash on or off

adjust the brightness

zoom in or out

Using video options

[ ].

After saving a video clip, press <Options> to access

the following options:

and hold [ / ].

•

Record another: return to Record mode.

[

Send via: send the file via MMS, e-mail, or

Bluetooth.

4. Press [

5. Press [

]

to start recording.

•

Calendar starting day: set which day of the

week the calendar starts with.

to stop recording. The video clip is

automatically saved.

Phone settings (Menu 9.2)

Many different features of your phone’s system can be

customised to suit your preferences.

Settings (Menu 9)

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Language (Menu 9.2.1)

Use this menu to select one of several languages for

the display text.

Greeting message (Menu 9.2.2)

To access this menu, press <Menu> in Idle mode and

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

select Settings

Time and date (Menu 9.1)

This menu is only available if supported by your

service provider.

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World clock menu.

Shortcuts (Menu 9.2.3)

ꢀ

•

p. 44

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

Set time: enter the current time.

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

Assigning a shortcut menu

•

1. Select a key to be used as a shortcut key.

2. Select a menu to be assigned to the key.

•

Menu functions

Using shortcut options

•

Cover keypad lock: lock the exposed keys to

keep accidental presses from affecting your

phone’s operation when the phone is closed.

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

Display settings (Menu 9.3)

Use this menu to change settings for the display and

backlight.

•

Remove all: deactivate all shortcut assignments.

Volume key (Menu 9.2.4)

Wallpaper (Menu 9.3.1)

Use this menu to set whether the phone mutes the call

ringer or rejects a call if you press and hold [ / ]

when a call comes in.

You can set up the idle screen on both displays.

•

Main display: select an image or video clip to be

displayed on the main display.

Extra settings (Menu 9.2.5)

Cover display: select an image to be displayed on

the external display.

You can turn the automatic redialling or answering

feature on or off, and lock the external keys.

Text position: select a text position. If you don’t

want to display text in Idle mode, select Off

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

•

Text mode: select a font style.

Text colour: select a font colour.

•

Active flip: answer an incoming call by opening

the phone.

Graphic logo: set the phone to display a graphic

icon instead of the service provider’s logo on the

idle screen. This is only available if a graphic icon

has been received in a message.

Anykey answer: answer an incoming call by

pressing any key, except for <Reject> and [ ].

Main menu style (Menu 9.3.2)

Sound settings (Menu 9.4)

You can select a display style for the main menu

screen.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

Skin (Menu 9.3.3)

Use this menu to change the sound settings for

incoming calls.

You can select a skin colour pattern for Menu mode.

•

Alert type: specify how you are to be informed of

incoming calls.

Brightness (Menu 9.3.4)

You can adjust the brightness of the display for

varying lighting conditions.

Ringtone: select a ringtone to be used for the call

ringer.

Dialling display (Menu 9.3.5)

Volume: select a ringtone volume.

Use this menu to select a font colour for the numbers

entered while dialling.

Keypad tone (Menu 9.4.2)

Use this menu to select the tone that the phone

sounds when you press a key.

Show caller information (Menu 9.3.6)

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information. To set the external display to show caller

You can adjust the keypad tone volume using

[ / ] in Idle mode.

information, select With cover display

Message tone (Menu 9.4.3)

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages individually.

TV-out settings (Menu 9.3.7)

Use this menu to select the video system for a TV.

Menu functions

•

Alert type: specify how you are to be informed

when a message comes in.

Quiet mode (Menu 9.4.6)

Use this menu to set how the phone acts to alert you

to a specific event while in Quiet mode.

•

Tone: select one of several message tones.

Repetition: specify how often the phone informs

you of a new message.

Extra tones (Menu 9.4.7)

Use this menu to customise additional tones for the

phone.

Power on/off (Menu 9.4.4)

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Alert type: specify how you are to be informed of

power-on or power-off.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

•

Tone: select the tone that the phone sounds when

the phone is switched on or off.

Alert on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Flip tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

•

Indicative tone: set the phone to beep when a

pop-up window displays.

•

Alert type: specify how you are to be informed

when you open or close the phone.

•

Tone: select the tone that the phone sounds when

you open or close the phone.

•

Night time: the keypad light is used only between

5:00 PM and 9:00 AM.

Light settings (Menu 9.5)

Use this menu to change settings for the light.

Custom time: specify the time period that the

keypad light is used.

Backlight (Menu 9.5.1)

You can select the length of time the backlight stays

on or the length of time the display stays on in Dim

mode, in which the backlight is off.

Network services (Menu 9.6)

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Main display normal: select the length of time

the backlight stays on.

•

Main display dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

Call diverting (Menu 9.6.1)

This network service reroutes incoming calls to a

phone number that you specify.

1. Select a call diverting option:

•

Show cover indicators: set whether or not the

cover display icons are shown on the external

display.

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

Keypad light (Menu 9.5.2)

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Use this menu to set how the phone controls the use

of the keypad light.

•

Any time: the keypad light is always used.

Menu functions

•

Cancel all: cancel all call diverting options.

•

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home service area.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

•

Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

6. If you selected No reply, move to the Seconds

line and select the length of time the network

delays before diverting a call.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

7. Press <Select>.

Deactivate

Call barring (Menu 9.6.2)

4. Enter the call barring password supplied by your

service provider and press <Select>.

This network service allows you to restrict your calls.

1. Select a call barring option:

Call waiting (Menu 9.6.3)

•

All outgoing calls: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home service area.

All incoming calls: prohibit incoming calls.

This network service informs you when someone is

trying to reach you while you are on another call.

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate and press <Select>. To

•

deactivate call waiting, select Deactivate

•

Connect to voice server: connect to the

voicemail server to listen to your messages.

Network selection (Menu 9.6.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area. You can select a

network other than your home network only if there is

a valid roaming agreement between the two.

Voice server number: enter the voicemail server

number.

Closed user group (Menu 9.6.7)

Use this menu to set incoming and outgoing calls to be

restricted to a selected user group. For details about

how to create a closed user group (CUG), contact your

service provider.

Caller ID (Menu 9.6.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

•

Index list: add, delete, or activate CUG index

numbers.

Some networks may not allow you to change this

setting.

•

Outside access: enable calls to numbers other

than those in the closed user group. This feature

depends on the nature of your CUG subscription.

Voice mail server (Menu 9.6.6)

•

Default group: enable the default CUG, if you

have set one with your service provider. When

making a call, you are given the option of using

your default CUG, instead of selecting one from the

list.

Use this menu to store the number of the voicemail

server and access your voicemails.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

Menu functions

Band selection (Menu 9.6.8)

• If there are obstacles between the devices, the

operating distance may be reduced.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

• It is recommended that you don’t use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and MP3 player,

or vice versa, for better performance.

• Some devices may not be compatible with your

phone.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

Bluetooth (Menu 9.7)

•

Activation: activate or deactivate the Bluetooth

feature.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

My devices: search for connectable Bluetooth

devices.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

•

Bluetooth services: display available Bluetooth

services.

3. Select a device.

4. Enter a Bluetooth PIN and press <OK>. This code

is used just once and you don’t need to memorise

it.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

When the owner of the other device enters the

same code, pairing is complete.

devices

Some devices, especially headsets or hands-free car

2. Select Search for new devices

kits, may have a fixed Bluetooth PIN, such as 0000

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

If the other device has a code, you must enter it.

Using device options

•

Stereo headset

Computer

•

Printer

From the device list, press <Options> to access the

following options:

PDA

•

Connect: connect to a headset or hands-free car

kit.

Mobile phone

Unknown device

Mono headset/Hands-free car kit

Disconnect: end the connection with the

connected device.

The colour of the icon indicates the status of the

the device:

Browse files: search for data from the device and

import data directly to your phone.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Service list: access the Bluetooth service list of

the device.

Rename: rename the paired device.

Menu functions

•

Authorise device

Unauthorised device

1. If an unauthorised Bluetooth device sends data to

your phone, press <Yes> to allow the device to

access your phone.

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

2. Press <Yes> to receive data.

•

Delete: remove the selected device or all devices

from the list.

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

2. Select the application in which the item you want

to send is stored.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

3. Scroll to the item you want and press <Options>.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

PIN check (Menu 9.8.1)

5. Select a device.

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Receiving data via Bluetooth

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Change PIN code (Menu 9.8.2)

SIM lock (Menu 9.8.6)

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

This menu allows your phone to work only with the

current SIM by assigning a SIM lock code. You must

enter the SIM lock code to use a different SIM card.

Phone lock (Menu 9.8.3)

Fixed dialling mode (Menu 9.8.7)

Use this menu to lock the phone from unauthorised

use.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

The password is preset to 00000000. To change the

password, use the Change password menu.

Change PIN2 code (Menu 9.8.8)

If supported by your SIM card, use this menu to

change your current PIN2.

Change password (Menu 9.8.4)

Use this menu to change your phone password.

Connection settings (Menu 9.9)

Privacy (Menu 9.8.5)

Use this menu to create and customise the profiles

containing the settings for connecting your phone to

the network. You need these settings to use the web

browser or send MMS messages or e-mails.

Use this menu to lock access to messages, media files,

or all menu functions on the phone, except for call

functions.

When a privacy option is enabled, you must enter the

phone password to access the locked items or

functions.

Menu functions

•

DNS: activate or deactivate the DNS (Domain

Name Server) addresses.

DNS1 and DNS2: enter the primary and

secondary DNS addresses.

Bearer: select the network bearer type.

Advanced settings: change the advanced

options. Depending on the bearer setting,

available options vary.

Your phone is suited for connecting to the network

by default. If you change the settings without first

checking with your service provider, the web

browser, MMS, and e-mail features may not work

properly.

•

Creating a profile

1. Press <New>. If a profile has already been saved,

press <Options> and select Add new

connection

When the bearer is set to GPRS

2. Specify each information:

APN: enter the access point name.

•

Profile name: enter a profile name.

Homepage URL: enter the URL address of the

page to be used as your homepage.

Proxy: activate or deactivate the proxy server.

IP address: enter the IP address of the proxy

server.

Password: enter the login password.

When the bearer is set to GSM

•

Dial number: enter the PPP phone number.

Password: enter the login password.

•

Port: enter the port number of the proxy

server.

Linger time: set a time period after which the

network is disconnected if there has been no

new data traffic in that time.

Data call type: select a call type for data

transmission.

3. Press <Save> to save the profile.

Using profile options

Solve problems

Help and personal needs

Press <Options> to access the following options:

•

Edit: edit the selected profile.

Delete: delete the profile.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

Add new connection: add a new profile.

When you switch on your phone, the following

messages may appear:

Reset settings (Menu 9.10)

Use this menu to reset the phone’s settings you have

changed.

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

1. Press [ ] to select the setting categories to be

reset.

“Enter password”

2. Press <Reset>.

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

“Enter PIN”

change this password.

ꢀp. 93

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

•

Be sure that you are accessing the correct cellular

network.

•

The PIN has been entered incorrectly three times

in succession, and the phone is now blocked. Enter

the PUK supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No service,” “Network failure,” or “Not done”

displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Warning

Low

You have entered a number but it was not dialled

battery” flashes on the display

•

Be sure that you have pressed [

•

Your battery is insufficiently charged. Recharge the

battery.

The audio quality of the call is poor

Be sure you have accessed the right cellular

network.

•

Be sure that you have not set an outgoing call

barring option.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

Your correspondent cannot reach you

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Phonebook entry

Health and safety information

•

Use the Contact list menu to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery doesn’t charge properly or the phone

sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to solve

the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The highest SAR value for this model phone was 0.929W/

kg.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

* The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Pacemakers

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

100

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

101

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

accidentally damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

102

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

103

Index

Broadcast messages • 57

Browser, web • 49

CB (Cell Broadcast) messages •

57 65

Characters, enter • 26

Configuration messages • 55

Connection tone • 86

Converter • 48

Creating messages

e-mail • 54

MMS • 53

SMS • 52

CUG (Closed User Group) • 89

Display

brightness • 85

AB mode, text input • 26

Active flip • 84

Alarm • 45

icons • 10

language • 83

layout • 10

Calculator • 48

Calendar • 72

Call cost • 34

Call log

Answering

settings • 84

call • 29

Diverting, calls • 87

Document files • 70

DRM (Digital Rights

Management) • 66

DTMF tones, send • 31

second call • 30

Anykey answer • 84

Auto redial • 84

dialled • 33

missed • 33

received • 33

Call time • 33

Caller groups • 36

Background image • 84

Backlight, set

display • 87

Caller ID • 85

Date, set • 83

Deleting

call log • 32

E-mails

Calls

creating/sending • 54

deleting • 59

setting • 62

viewing • 58

Emergency calls • 101

keypad • 87

answering • 29

barring • 88

Band selection • 90

Barring, calls • 88

Battery

e-mail • 58

events • 75

MMS • 56 58

phonebook • 35

SMS • 56 58 60

Dialled calls • 33

59, 60

diverting • 87

holding • 30

redialling • 28

rejecting • 29

transferring • 32

waiting • 88

charging • 7

low indicator • 8

precautions • 98

Bluetooth

FDN (Fixed Dialling Number)

mode • 93

Dialling font, set • 85

Dialling, voice • 46

receiving, data • 92

sending, data • 92

settings • 90

File manager • 66

File viewer • 70

Flip tone • 86

Camera

photos • 76

videos • 80

104

MMS • 53

push • 57

SMS • 52

Games • 44

Language, select • 83

Last number, redial • 28

Light settings • 87

Locking

Password

Greeting message • 83

call barring • 88

phone • 93

Minute minder • 86

Missed calls • 33

MMS messages

Phone

Health and safety • 97

Holding, call • 30

cover keypad • 84

menu functions • 93

phone • 93

care and maintenance •

102

display • 10

icons • 10

locking • 93

password • 93

resetting • 95

switching on/off • 8

unpacking • 6

creating/sending • 53

deleting • 56

setting • 61

SIM card • 93

Icons, description • 10

Image editor • 42

Image printing • 67

Images, downloaded • 66

Inbox, messages

e-mail • 58

viewing • 55

Low battery indicator • 8

MP3 player • 38

Multiparty-call • 32

Music, downloaded • 69

Memory card

accessing files • 72

installing • 24

Memory status

downloaded items • 72

file manager • 72

messages • 65

phonebook 37

Menu style • 85

Message tone • 85

Messages

Phonebook

adding • 35

MMS/SMS • 55

Name card • 37

Names

International calls • 28

Internet • 49

deleting • 35

finding • 34

managing • 37

options • 34

dialling • 46

entering • 26

searching • 34 47

Java applications • 44

Network band, select • 90

Network selection • 89

Network services • 87

speed dialling • 36

Photos

Keypad lock • 84

Keypad tones

selecting • 85

sending/muting • 31

volume • 85

editing • 42

printing • 67

taking • 76

viewing • 66

cell broadcast • 57

configuration • 56

Outbox, messages • 57

e-mail • 54

greeting • 83

105

Index

PIN, change • 93

Road safety • 99

Roaming • 89

PIN2, change • 93

Power on/off tone • 86

Printing an image • 67

Privacy • 93

Problems, solve • 95

Push messages • 57 65

T9 mode, text input • 27

Templates, message • 59

Text, enter • 26

Time, set • 83

Timer • 48

Waiting call • 88

Wallpaper • 84

Web browser

access • 49

Safety

information • 97

bookmarks • 51

World clock • 44

precautions • 1

Security, calls • 92

Sent messages • 58

Shortcut • 83

TV out • 67 85

Quiet mode

entering • 13

setting • 86

Videos

SIM card

playing • 68

recording • 80

inserting • 7

locking • 93

Skin colour • 85

SMS messages

Viewing on TV

images • 67

videos • 69

Received calls • 33

Received messages

e-mail • 58

creating/sending • 52

deleting • 56

setting • 60

Voice commands

camera settings • 78

MMS/SMS • 55

Recording

videos • 80

voice memos • 41

Redialling

automatically • 84

manually • 28

Resetting phone • 95

Ringer

menu accessing • 47

name dialling • 46

name searching • 47

viewing • 55

Sound settings • 85

Sounds, downloaded • 69

Speakerphone • 31

Speed dial • 36

Stopwatch • 49

Switching on/off

microphone • 31

phone • 8

Voice recorder

playing • 41

recording • 41

Voicemail server • 89

incoming calls • 85

messages • 86

106

Teac DV W28U V User Manual
Sony Ericsson Walkman W600i User Manual
Sony CX NMT90 User Manual
Sony CRX 160E User Manual
Seagate BARRACUDA ST31000520AS User Manual
Samsung Cell Phone T369 User Manual
Roberts Radio R9929 User Manual
Pioneer Premier DEH P770MP User Manual
Pioneer CD Player DEH P510UB User Manual
Philips AJ3959 User Manual