Samsung SGH E730 User Manual

* Depending on the software installed or your service provider, some

of the description in this manual may differ from your phone.

* Depending on your country, your phone and accessories may

appear different from the illustrations in this manual.

SAMSUNG ELECTRONICS

Printed in Korea

Code No.:GH68-07059A

English. 06/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 92.

Key in the emergency number for your present

location, then press

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

About this Guide

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

•

MP3 player

Play MP3 music files using your

phone as a MP3 player.

Indicates that you can get more information

on the referenced page.

ꢀ

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

Bluetooth

Send photos, images, videos, and

other personal data, and connect

to other devices using free,

wireless Bluetooth technology.

[

]

Indicates a key on the phone. For example,

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

E-mail

Send and receive e-mails with images, video, and

audio attachments.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

•

Java

Enjoy Java™-based embedded

games and download new games.

•

WAP browser

•

Calendar

Keep track of your daily, weekly,

and monthly schedule.

Access the wireless web and access

various services and up-to-the-

minute information.

•

Voice recorder

Record memos or sounds.

FM radio

Listen to your favourite FM radio

channels anytime, anywhere.

Browse the web ................................................... 17

Use Phonebook .................................................... 17

Send messages.................................................... 18

View messages .................................................... 20

Use Bluetooth...................................................... 21

Contents

Unpack

Make sure you have each item

Your phone

Enter text

ABC, T9, Number, and Symbolic mode

Call functions

Buttons, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

Begin with your camera, music, and other special features

Use camera......................................................... 15

Play MP3s ........................................................... 16

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p.30

3 Applications

ꢀ

p.37

5 Messages

ꢀ

p.48

8 Camera

9 Settings

ꢀ

p.71

p.79

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp.30

ꢀp.31

1 MP3 Player

2 Voice recorder

3 Java world

4 FM radio

5 World time

6 Alarm

7 Calculator

8 Converter

9 Timer

ꢀp.37

ꢀp.39

ꢀp.40

ꢀp.41

ꢀp.43

ꢀp.44

ꢀp.45

1 Create new message

2 My messages

3 Templates

4 Delete all

5 Settings

6 Broadcast messages

7 Memory status

ꢀ

p.48

p.51

p.57

p.58

p.63

ꢀ

1 Time & Date

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Bluetooth

7 Security

8 Memory status

9 Reset settings

ꢀp.79

ꢀp.81

ꢀp.82

ꢀp.83

ꢀp.86

ꢀp.88

ꢀp.89

ꢀp.90

6 Call time

7 Call costs^*

2 Phonebook

ꢀp.32

6 File manager

ꢀ

p.64

1 Contact list

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

ꢀp.36

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀ

p.64

p.65

p.66

10 Stopwatch

2 FDN list

4 Browser

ꢀp.45

3 Add new contact

4 Group

5 Speed dial

6 My name card

7 Own number

8 Management

1 Home

ꢀp.45

ꢀp.46

ꢀp.47

ꢀp.48

* Shows only if supported by your SIM

card.

2 Bookmarks

3 Go to URL

4 Clear cache

5 Profile settings

6 Current profile

7 Calendar

ꢀ

p.67

9 Service number

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece/

Speaker

Display

Phone

Travel Adapter

Camera

Navigation keys

(Up/Down/Left/

Right)

Flash

Camera key

WAP access/

Confirm key

Soft key (right)

User’s Manual

Battery

External

display

Headset jack

Soft key (left)

Dial key

MP3 player/

FM radio

control keys

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Volume keys

Cancel/Correct

key

Alphanumeric

keys

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

Special

function keys

Microphone

Get started

First steps to operating your phone

Plug the travel adapter

into the phone.

Install the battery.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Plug the adapter into a standard AC wall outlet.

Remove the battery.

Insert the SIM card.

When the phone is completely charged (the battery

icon stops blinking), unplug the adapter from the

power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK>.

use is prohibited.

Low battery indicator

When the battery is low:

1. Open the phone.

Switch off

•

a warning tone sounds,

the battery low message displays, and

2. Press and hold [

the empty battery icon

blinks.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

End a call.

Hold down to switch the phone on and off.

In Menu mode, cancel input and return the

phone to Idle mode.

Key(s)

Description

Perform the function indicated on the bottom

line of the display.

Enter numbers, letters, and some special

characters.

In Idle mode, hold [1] down to access your

voice mail server. Hold [

international call prefix.

In Idle mode, access your favourite menus,

directly.ꢀp. 80

0] down to enter the

In Menu mode, scroll through the menu

options.

Enter special characters.

Hold [ down to activate or deactivate

Quiet mode.

Hold ] down to enter a pause.

In Idle mode, launch the Wireless

Application Protocol (WAP) browser.

In Menu mode, select the highlighted menu

option.

]

[

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

Delete characters from the display.

In Menu mode, return to the previous menu

level.

(on the left) closed, hold down to turn on the backlight.

Send or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

In Camera mode, take a photo or record a

(on the right)

video.

Get started

Display

Layout

Key(s)

Description

Hold down to display the function selection

screen to access the MP3 player or the FM

radio.

Icons

display various icons.

(on the front)

Text and graphics

display messages,

instructions, and

In the MP3 player, start or stop playback.

In the FM radio, turn the radio on or off.

information you enter.

Return to the previous file during playback.

Scan through radio channels.

Soft key function indicators

show the current functions

assigned to the two soft

keys.

Contacts

(on the front)

Skip to the next file during playback.

Scan through radio channels.

Icons^*

Received signal strength

Call in progress

Out of your service area; you cannot

send or receive calls

Alarm set

New text message

New multimedia message

New voicemail message

Access menu functions

Icons

(continued)

New e-mail received or being sent

One of the message Inboxes is full

Call diverting feature is active

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

ꢀ

p. 83

Bluetooth feature is active

p. 86

display indicates their current role.

ꢀ

Contacts

GPRS network

Home Zone, if you have registered

for the appropriate service

Office Zone, if you have registered

for the appropriate service

Call ringer set to vibrate

ꢀp. 82

Quiet mode is active

ꢀp. 83

Press the right soft

key to access

Contact list in the

Phonebook menu.

Press the left soft

key to access

Menu mode.

Battery power level

* The icons shown on the display may vary, depending

on your country or service provider.

Get started

Customise your phone

Select an

option

1. Press the appropriate soft key.

1. In Idle mode, press <Menu

Display

2. Press the Navigation keys to

move to the next or previous

option.

and select Settings

settings Language

2. Select a language.

→

Phone

language

→

3. Press <Select> or [

] to

confirm the function displayed

or option highlighted.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

→

Incoming call

→

4. To exit, choose either of the

following methods.

2. Press [Left] or [Right] to select

a ringer category.

•

Press <Back> or <C> to

move up one level.

3. Press [Up] or [Down] to scroll

through ringer melodies.

•

Press [

mode.

] to return to Idle

4. Select a ringer melody you

want.

Use shortcuts Press the number key

corresponding to the option you

want.

5. Press <Save>.

You can set your wallpaper for the

main or external display.

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

Idle mode

wallpaper

Quiet mode

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

→

Press and hold

[

]

in Idle mode.

→

Main

display or Cover display

You can use the Navigation keys as

shortcut keys to access specific

menus directly from Idle mode.

shortcuts

2. Select an image category and

then an image.

To assign a menu to a key:

For Cover display, you can

select Cover title to enter text

to be displayed on the external

display.

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

3. Press <Options> and select

Change

→

3. Press [

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

4. Scroll to a menu to be assigned

to the key.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

5. Press <Save>.

→

Make/Answer calls

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on powerup.

Phone lock

1. In Idle mode, enter an area code

and phone number.

2. Press

3. To end the call, press

Make a call

[

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

[

→

1. When the phone is ringing, press

Answer a call

[

2. To end the call, press

[

“00000000” and press <OK>.

3. Enter a new 4- to 8- digit

Press [ ].

Adjust the

volume during

a call

password and press <OK>.

4. Enter the new password again

and press <OK>.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Capture mode, press [

1] to

Record a video

switch to Record mode.

2. Press [

3. Press [

] to start recording.

] to stop recording.

The video is saved

automatically.

1. Open the phone.

Take a photo

2. In Idle mode, press and hold

4. Press the right soft key to

return to Record mode.

[

] to turn on the camera.

3. Aim the lens at the subject and

adjust the image.

1. In Record mode, press the left

Play a video

4. Press [

photo is saved automatically.

5. Press [ ] to return to

Capture mode.

] to take a photo. The

soft key and select Go to

videos

2. Select a video clip you want.

1. In Capture mode, press the left

View a photo

soft key and select Go to

photos

2. Select a photo you want

Step outside the phone

Play MP3s

1. From the MP3 player screen,

press [ ].

Play MP3 file

Copy MP3 files Use these methods:

2. During playback, use the

following keys:

to the phone

•

Download from the wireless

web p. 45

ꢀ

•

[

]: pauses/resumes

•

Download from a computer

using Samsung PC Studio II

playback.

•

[Left]: goes back to the

previous file. Moves

ꢀSamsung PC Studio II User’s

Guide

backward through a file

when held down.

•

Receive via Bluetooth

ꢀp. 88

•

[Right]: skips to the next

file. Moves forward through

a file when held down.

[Up]: opens the play list.

[Down]: stops playback.

1. In Idle mode, press <Menu

and select Applications

MP3 Player

2. Press <Options> and select

Add to list Add all or Add a

file

Creat a play

list

→

•

→

[

]: adjusts the volume.

3. For Add a file, scroll to a

specific file and press <Add>.

Repeat from step 2.

Browse the web

Use Phonebook

Using a built-in WAP (Wireless Application Protocol)

browser, you can get easy access to the wireless web

to get a variety of up-to-date services and information

and to enjoy downloads of web content.

To the phone’s memory:

1. In Idle mode, enter a phone

number and press [ ].

2. Select Phone a number type.

Add an entry

→

In Idle mode, press [

Launch the

browser

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Graphic ID, Alert, Group, and

Notes.

•

To scroll through browser items,

press [Up] or [Down].

Navigate with

the WAP

•

To select an item, press <

browser

4. Press [

] to save the entry.

To return to the previous page,

press <Back> or [ ].

To return to the home page,

hold [ ] down.

To access browser options,

To the SIM card:

1. In Idle mode, enter a phone

•

number and press [

2. Select SIM

3. Enter a name.

4. Press [ ] to save the entry.

press [ ] or select

top of the screen.

on the

Step outside the phone

Send messages

1. In Idle mode, press

Contacts>.

Find an entry

1. In Idle mode, press <Menu

Send a text

2. Enter a name or scroll to an

entry.

and select Messages

new message Text

message

2. Enter the message text.

3. Press <Options> and select

→

Create

message (SMS)

→

3. Select an entry.

4. Select a number and press

[

]

to dial, or press

Options> to access options.

Save and send or Send only

4. Enter a destination number.

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

5. Press [

message.

] to send the

→

2. Specify your contact

information.

1. In Idle mode, press <Menu

and select Messages Create

new message Multimedia

message

2. Select Subject

3. Enter the message subject and

press [ ].

Send a

3. Press [

card.

] to save the name

→

multimedia

message

(MMS)

→

4. To send the name card to other

people, press <Options> and

select Send via

→

SMS/MMS/

Email Bluetooth

4. Select Picture & Video

→

1. In Idle mode, press <Menu

Send a

Send an e-mail

Pictures or Videos

→

and select Messages

→

Create

multimedia

message

(MMS)

category.

new message

→

5. Select a photo and press

Add>.

2. Select Subject

(continued)

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

If you select a video clip, press

the left soft key and select Add

6. Select Sound

7. Select a sound and press

Add>.

8. Select Message

9. Enter the message text and

press [ ].

10.Press <Options> and select

Send

→

a category.

[

7. Add images, videos, sounds, or

music files.

8. Press <Options> and select

Send

9. Enter an e-mail address.

11.Enter a destination phone

number or e-mail address.

10.Press [

e-mail.

] to send the

12.Press [

message.

] to send the

Step outside the phone

View messages

From the Inbox:

View a

multimedia

message

(continued)

1. In Idle mode, press <Menu

When a notification appears:

View a text

message

and select Messages

messages Inbox

2. Select a message.

→

1. Press <View>.

→

2. Select a message from the

Inbox.

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Email box

2. Select Check new mail to

retrieve an e-mail or a header.

3. Select an e-mail or a header.

4. If you selected a header, press

View an e-mail

1. In Idle mode, press <Menu

→

and select Messages

messages Inbox

2. Select a message.

→

When a notification appears:

View a

multimedia

message

1. Press <View>.

Options> and select

2. Select a message from the

Inbox.

Retrieve

Use Bluetooth

1. Access an application.

2. Scroll to an item.

Send data

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

In Idle mode, press <Menu> and

select Settings Bluetooth

Activation On

Turn on

Bluetooth

5. If necessary, enter the

→

Bluetooth PIN and press <OK>.

→

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

Search for and

pair with a

Bluetooth

device

→

If necessary, press <Yes> to

confirm the reception.

Search new device

2. Select a device.

3. Enter a Bluetooth PIN code or

the other device’s Bluetooth PIN

code, if it has one, and press

<OK>.

When the owner of the other

device enters the same code,

pairing is complete.

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

ABC, T9, Number, and Symbolic mode

You can enter text for some features such as

messaging, Phonebook, or Calendar, using ABC mode,

T9 mode, Number mode, and Symbolic mode.

Characters in order displayed

Keys

Upper case

Lower case

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press the right soft key to change the text input

mode you want. Or, press and hold the right soft

key and select the text input mode.

: T9 mode,

: ABC mode,

: Number mode

: Symbolic mode

Press the hold [ ] to switch between ABC mode

and T9 mode.

Press and hold [ ] to switch to Symbolic mode.

To enter the other languages in the text input

Tips for using ABC mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

•

mode, press <Options> and select Language

select

•

Press [ ] to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

3. When the word displays correctly, go to step 4.

Otherwise, press [ ] to display alternative word

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

)

•

Press [ ] to insert a space.

Depending on your country, the [ ] may be not

Press the Navigation keys to move the cursor.

available for scrolling alternative word choice.

Press [C] to delete characters one by one. Press

and hold [

] to clear the display.

4. Press [ ] to insert a space and enter the next

word.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

•

Press [ ] to change case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

Press [ ] to insert a space.

Press [Left] or [Right] to move the cursor.

Entering a word in T9 mode

)

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

•

5], [5], and [6] to

Press [

] to delete characters one by one. Press

T9 predicts the word that you are typing, and it

may change with each key that you press.

and hold [

C] to clear the display.

Adding a new word to the T9 dictionary

2. Enter the whole word before editing or deleting

characters.

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for your key

Call functions

Advanced calling features

presses. When there are no more alternative

words, Spell appears on the bottom line.

3. Press <Spell>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using ABC mode and

press <OK>.

Using Number mode

2. Press [ ].

Number mode enables you to enter numbers.

Press

[C]

to clear the last digit or press and hold

[

to clear the whole display. You can move the

Press the keys corresponding to the digits you want.

cursor to edit an incorrect digit.

Using Symbolic mode

Making an international call

Symbolic mode enables you to insert symbols.

1. In Idle mode, press and hold [

appears.

]. The

character

Press

2. Enter the country code, area code, and phone

number, then press [ ].

display more symbols

select a symbol

[Up] or [Down].

the corresponding

number key.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

clear the entered symbol(s)

insert the symbol(s)

[

2. Scroll to the number you want and press [ ].

OK>.

Making a call from Phonebook

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from

Phonebook.ꢀp. 32

Press <Accept> or [ ] to answer the call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

keys.

ꢀp. 34

Dialling a number from the SIM card

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

<Reject>, [ ], or [

].ꢀp. 80

•

When Active folder in the Extra settings menu

is active, you can simply open the phone.

ꢀp. 80

2. Press [Left] or [Right] to scroll through other

numbers.

•

Press <Reject> or [ ] to reject a call.

Depending on the setting in the Side key menu,

press and hold [ ] to mute a call ringer or

reject a call. p. 80

3. Press <Dial> or [ ] to dial the number you want.

ꢀ

Ending a call

Close the phone or press [ ].

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

1. Press <View>.

2. If necessary, scroll through the missed calls.

Call functions

3. Press [ ] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Using the headset

Use the headset to make or answer calls without

holding the phone.

Using the external speaker

Use the optional external speaker to talk and listen

with the phone a short distance away. First, you must

plug the speaker into the phone.

Connect the headset to the jack on the left side of the

phone.

Placing a call on hold/Retrieving

The buttons on the headset work as listed below:

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Press

redial the last call

answer a call

end a call

and hold the button twice.

the button.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

the button.

Options during a call

You can access a number of functions during a call.

4. Press <Options> and select End held call to end

the call on hold.

Adjusting the volume during a call

5. To end the current call, press [ ].

Use [

] to adjust the earpiece volume during a call.

Answering a second call

Using a Bluetooth headset

You can answer an incoming call while already on the

phone, if your network supports it and you have

Use an optional Bluetooth headset to talk on the

phone without holding the phone to your ear. To use

this feature, you first need to register your headset

activated the call waiting feature.ꢀp. 84

and connect it to the phone.

Press <Options> and select Switch to headset or

Switch to phone

ꢀp. 86

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press <Swap> to switch between the calls.

3. Press <Options> and select End held call to end

Using the voice clarity feature

the call on hold.

This feature increases the microphone’s sensitivity so

that the person with when you are speaking can hear

you clearly even though you may be whispering.

4. To end the current call, press [ ].

Transferring a call

Press <Options> and select Voice clarity on or

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Voice clarity off

Switching off the microphone (Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

Press <Options> and select Transfer

Press <Options> and select Mute or Unmute

Call functions

1. When connected with a teleservice system, press

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Muting or sending key tones

You can turn the key tones off or on.

Press <Options> and select Mute keys or Send

keys

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Using the messaging feature

You can create and send an SMS message or access

received messages.

ꢀp. 48

Press <Options> and select Message

Using Phonebook

You can access the Phonebook menu to locate or

Using SIM services

store entries.ꢀp. 32

The SIM service menu is available if you use a SIM

card in your phone. A SIM card provides services such

as news, weather, sports, entertainment, and location

services.

Press <Options> and select Phonebook

Sending a sequence of DTMF tones

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

For details, see your SIM card instructions or contact

your service provider.

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Phonebook. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

Having a private conversation with one

participant

Making a multi-party call

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

1. Press <Options> and select Private

2. Select a name or number from the participant list.

Your service provider must support multi-party calls

for you to use this feature.

You can talk privately with that person, while the

other participants converse with each other.

Setting up a multi-party call

1. Call the first participant.

3. To return to the multi-party call, press <Options

and select Join

2. Call the second participant. The first call is

automatically put on hold.

Dropping one participant

1. Press <Options> and select Remove

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

2. Select a name or number from the participant list.

4. If desired, call another person or answer an

incoming call.

The participant is dropped from the call, but the

call continues with the other parties.

5. Press <Options> and select Join

3. Close the phone or press [ ] to end the multi-

party call.

6. Repeat steps 4 and 5 as desired.

•

Details: show the details of the selected call.

Menu functions

All menu options listed

Call: dial the displayed number.

Save as contacts: save the phone number to

Phonebook.

Call records (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, and the length of your calls.

•

Send message: send an SMS or MMS message.

Delete: delete the selected call record or all

records.

To access this menu, press <Menu> in Idle mode and

Missed calls (Menu 1.2)

select Call records

This menu displays the most recent calls that you did

not answer.

Current contacts (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

Dialled calls (Menu 1.3)

This menu displays the most recent calls you have

dialled.

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll to a call record.

Received calls (Menu 1.4)

3. Press [

] to view the details of a call, or [

]

This menu displays the most recent calls you have

received.

to dial the number.

Using call record options

While viewing the call record list, press <Options> to

access the following options:

Delete all (Menu 1.5)

Call costs (Menu 1.7)

Use this menu to delete all of the records in each call

type.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

1. Press [

cleared.

] to check the call record(s) to be

•

Last call cost: check the cost of your last call.

2. Press <Delete>.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

3. Press <Yes> to confirm the deletion.

Call time (Menu 1.6)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

•

Max cost: check the maximum cost limit set in

Set max cost

Reset counters: reset the cost counters. You

need to enter your PIN2.

•

Last call time: check the length of your last call.

Total sent: check the total length of all the calls

you have dialled.

Set max cost: set the maximum cost authorised

for your calls. You need to enter your PIN2.

•

Total received: check the total length of all the

calls you have received.

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated. You need

to enter your PIN2.

Reset timers: reset the call timers. You need to

enter the phone password.

The password is preset to 00000000. You can

change this password.

ꢀp. 89

Menu functions

Using Phonebook options

Phonebook (Menu 2)

While viewing the contact details, press <Options> to

access the following options:

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Edit: edit the contact information.

Send message: send an SMS, MMS, or e-mail

message.

To access this menu, press <Menu> in Idle mode and

•

Copy: copy the selected number to the phone’s

memory, the SIM card, or the FDN list.

select Phonebook

Contact list (Menu 2.1)

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

Use this menu to search for numbers in Phonebook.

•

Delete: delete the selected contact.

Press <Contacts> in Idle mode to quickly access

this menu.

Print via bluetooth: print the contact information

by connecting the phone to a printer via Bluetooth.

Finding an entry

1. Enter the first few letters of the name that you

want to find.

While viewing the contact list, press <Options> to

access the following options:

•

View: display details about the contact.

2. Select the name you want from the list.

Send message: send an SMS, MMS, or e-mail

message.

3. Press [ ] to dial the number, or <Options> to

access Phonebook options.

•

Add new contact: add a new contact to

Phonebook.

Delete: delete the selected contact or all contacts.

•

Language select: select a language to be used in

the text input mode.

Add new contact (Menu 2.3)

Use this menu to add a new contact to Phonebook.

FDN list (Menu 2.2)

Storing a number in the phone’s memory

1. Select Phone

Use this menu to create a list of contacts to be used in

FDN (Fixed Dialling Number) mode, in which the

phone allows outgoing calls only to the specified

phone numbers, if your SIM card supports this

feature. You can activate FDN mode in the FDN mode

2. Change the settings or enter information about the

contact.

•

First name

Mobile Home

number in any category.

Last name: assign a name.

Office Fax Other: add a

menu.ꢀp. 89

Adding a contact

•

Email: assign an e-mail address.

1. Press <Options> and select Add

Graphic ID: assign an image as a caller ID

image to alert you to a call from the person.

Alert: assign a ringer melody to alert you to a

call from the person.

2. Enter your PIN2 and press <OK>.

•

3. Enter a name and phone number, or press

<Options> and select Contact list to retrieve a

The settings specified in Graphic ID and

Alert are given priority over group settings.

contact from Phonebook.

4. If necessary, change the location number.

5. Press <Save> to save the contact.

•

Group: assign the person to a caller group.

Notes: add a memo about the person.

Using contact options

3. Press [

] to save the contact.

Scroll to a contact and press <Options> to access

options.ꢀ”Using Phonebook options”

Menu functions

4. To add more members, press <Options> and

select Add a contact. Repeat this as desired.

Storing a number on the SIM card

→

1. Select SIM

2. Enter a name and a phone number.

Managing caller groups

3. If necessary, change the location number.

While viewing the group list, press <Options> to

access the following options:

4. Press [

] to save the contact.

•

View: display the members of the selected group.

Add: add a new group.

Group (Menu 2.4)

Use this menu to organise your contacts in caller

groups.

Edit: edit the properties of the selected group.

Send message: send an SMS, MMS, or e-mail

message to the member(s) you want.

Creating a new caller group

1. Press <Options> and select Add

•

Delete: delete the selected group. Group

members, however, are not deleted from

Phonebook.

2. Enter a name for the group.

3. Select the Graphic ID line to assign an image.

4. Select the Alert line to assign a ringer melody.

5. Press <Save> to save the group.

Speed dial (Menu 2.5)

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

Adding members to a caller group

1. Select a group.

Assigning speed dial numbers

1. Select a key location from

for your voice mail server.

2. Press <Add>. The list of contacts stored in your

9. [1] is reserved

phone’s memory is displayed.

3. Select a contact you want to add to the selected

group.

2. Select a contact you want.

3. If the contact has more than one number, select

the number you want.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

Managing speed dial entries

phone’s memory.ꢀp. 33

From the Speed dial screen, press <Options> to

access the following options:

Using name card options

•

Add: assign a number to an unassigned key. You

can select a contact from Phonebook or the FDN

list.

After saving your name card, press <Options> to

access the following options:

•

Edit: edit the name card.

•

View: display the number assigned to the key.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

Change: assign a different number to the

assigned key.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

•

Remove: clear the speed dial setting.

•

Remove: delete the name card.

Dialling speed dial entries

Print via bluetooth: print the name card by

connecting the phone to a printer via Bluetooth.

Press and hold the appropriate key in Idle mode.

My name card (Menu 2.6)

Own number (Menu 2.7)

Use this menu to create a name card and send it to

other people.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers in

your SIM card.

Menu functions

•

Memory status: display the number of contacts

you have stored in Phonebook.

Management (Menu 2.8)

Use this menu to manage Phonebook.

•

Default saving: select a default memory location

to save contacts.

Service number (Menu 2.9)

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voice mail numbers.

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

•

Copy all to phone: copy all of the contacts stored

in the SIM card to the phone’s memory.

Scroll to the number you want and press <Dial> or

Sort by contacts: sort your contacts by the first

name or last name.

[

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or the FDN list.

1.Press [

cleared.

] to check the location(s) to be

2.Press <Delete> and then <Yes>.

If you select FDN, you need to enter the PIN2.

3.Enter the phone password and press <OK>.

The password is preset to 00000000. You

can change this password.ꢀp. 89

The downloaded or received files are stored in the

Music folder. p. 65

Applications (Menu 3)

ꢀ

Use this menu to play Java games, to play music files,

to record a voice memo, to set time zones and alarms,

or to use your phone as a calculator, timer, convertor,

or stopwatch. You can also use the phone as an FM

radio.

Add music files to the play list

Add MP3 files to the play list.

1. From the MP3 player screen, press <Options

and select Add to list

To access this menu, press <Menu> in Idle mode and

2. Select either of the following options:

select Applications

•

Add all: add all of the files in the phone’s

memory to the play list.

Add a file: add a specific file to the play list.

MP3 Player (Menu 3.1)

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

3. If you selected Add a file, scroll to a file and press

Add>.

Downloading or receiving music files

4. Press <Back> to go back to the MP3 player

screen.

Use these methods to save MP3 files to your phone’s

memory:

Playing music files

•

Download from the wireless web

ꢀp. 45

From the MP3 player screen, press [

Download from a computer using the Samsung PC

During playback, use the following keys:

Studio II programꢀSamsung PC Studio II User’s

Guide

Keys

Function

•

Via an active Bluetooth connectionꢀp. 88

Pauses or resumes playback.

Menu functions

•

Open play list: display the play list.

Keys

Function

Set as: set the file as your ring tone, alarm

melody, or a caller alert melody for a Phonebook

entry.

Left

Goes to the previous file. Moves backward

through a file when held down.

Right

Skips to the next file. Moves forward

through a file when held down.

•

Delete: remove the music file from the phone’s

memory.

Settings: change the default settings for playing

music files.

Opens the play list.

Down

Stops playback.

Repeat mode: select a repeat mode.

Adjusts the volume level.

Changes an equalizer type.

Changes the repeat mode.

Changes an equalizer colour.

Turns shuffle mode on or off.

Shuffle: set the MP3 player to play music in

random order.

Visualization: select an equalizer type.

Skin: select a skin type.

Volume: select a volume level.

Properties: view the file properties.

•

Accessing the play list

1. From the MP3 player screen, press <Options

Using music file options

From the MP3 player screen, press <Options> to

access the following options:

and select Open play list to access the play list.

2. Press <Options> to access the following options:

•

Play: play music files.

•

Play: play the selected file.

Add to list: add files to the play list.

Send via: send music files via e-mail or Bluetooth.

•

Move list: move the selected file to the

position you want within the play list.

Remove: remove the selected file or all of the

files from the play list.

•

Press and hold [

]

to lock the exposed keys to

keep accidental presses from affecting playback.

The key lock icon ( ) appears on the bottom line.

Voice recorder (Menu 3.2)

Playing MP3 files with the phone closed

1. Press and hold [

MP3 player.

Use this menu to record voice memos. A voice memo

can be up to one hour long.

] and then [

] to open the

Recording a voice memo

1. Press [

2. Speak into the microphone.

2. Press [

During playback,

Use the following keys to control the MP3 player:

] to start playing music.

] to start recording.

•

Press [

] to pause or resume the recording.

3. When you finish, press <Stop>. The voice memo

Keys

Function

is saved automatically.

Pauses or resumes playback.

4. To

Return to Record mode

Press

Returns to the previous file. Moves

backward through a file when held

down.

[Up]

play back the voice memo [

Skips to the next file. Moves forward

through a file when held down.

access voice memo

options

<Options>.ꢀp. 65

Adjusts the volume.

return to the previous

level

<Back>.

Menu functions

Recording time: select the recording time.

Playing a voice memo

1. From the Voice record screen, press <Options

Volume: select the voice memo volume to be

and select Go to voice list

used during playback.

2. Select a voice memo. The memo plays.

During playback, use the following keys:

Default name: specify a default saving prefix for

the voice memo.

•

Go to voice list: go to the list of voice memos you

have recorded.

Keys

Function

Pauses or resumes playback.

Moves backward.

Moves forward.

Java world (Menu 3.3)

Left

Right

Use this menu to access and play Java games and to

set up a profile for accessing Java services.

Returns to Record mode.

Stops playback.

Using Java game options

1. From the Java world screen, select Downloads

Down

and scroll to a game.

Adjusts the volume.

2. Press <Options> to access the following options:

•

Launch: launch the selected game.

Using voice memo options

Application settings: set a game to be

continued when a call comes in or an alarm

sounds during the game. You can also set the

phone to exchange game information with the

network while playing an online game or when

you need to connect to the Internet.

From the Voice record screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Settings: configure the following settings for a

voice memo:

•

Delete: delete the selected game.

Properties: view the game properties.

DNS1: enter the primary DNS address.

DNS2: enter the secondary DNS address.

Configuring Java settings

Checking memory status

You can configure profile settings for accessing Java

services.

You can view the total amount of memory for the Java

games as well as the amount of used memory.

From the Java world screen, select Settings

From the Java world screen, select Memory status

The following settings are available:

FM radio (Menu 3.4)

•

APN: enter the access point name.

Use this menu to access the FM radio on your phone.

First, you must connect your phone with the headset,

which serves as a radio antenna.

Password: enter the password.

Proxy: select whether or not you use a proxy

server to access network services. Depending on

this setting, options in Proxy settings vary.

Finding and setting radio channels

1. Press [

] to turn on the radio.

2. Press [Left] or [Right] to move to the frequency of

a radio channel.

•

Proxy settings: provide you with the following

options:

The frequency moves by 0.1 MHz increments.

When the proxy is set to Enable

Otherwise, hold [Left] or [Right] down to

automatically scan through and save available

radio frequencies.

IP address: enter the HTTP proxy IP address.

Port: enter the proxy port number.

When the proxy is set to Disable

3. Scroll to an empty location.

Menu functions

4. Press <Options> and select Add

•

Edit: edit the name or frequency for the channel.

Self-tuning: let the phone automatically scan

through and save available radio frequencies.

Remove: remove the selected channel or all

channels.

Pop-up alert: set the phone to alert you to listen

5. Enter a name for the channel and press [

6. Select the channel number to be assigned to the

frequency.

•

Listening to the radio

1. From the FM radio screen, scroll to a radio channel.

to the radio at a specific time. When the pop-up

notification appears on the screen, press <Listen

2. Press [

Press [

] to turn on the radio.

] to adjust the volume.

to turn on the specified radio channel.

•

Speaker on/Earphone on: change the audio

mode to the phone’s speaker or headset.

Settings: select the radio volume.

• You can answer an incoming call or use other

phone functions while listening to the radio.

• The quality of the radio broadcast depends on

the radio station’s coverage in that particular

area.

Listening to the radio with the phone closed

1. Press and hold [

radio.

2. Press [

you want.

Otherwise, hold [

] and then [

] to move to a radio channel

] or [ ] down to

] to access the

3. To turn off the radio, access the FM radio menu

] or [

and press [

] again.

Using radio options

On the FM radio screen, press <Options> to access

the following radio options:

automatically scan through available radio

frequencies.

3. Select a channel or frequency and press [

turn on the radio.

] to

•

FM radio on/off: turn the radio on or off.

Add: add a radio channel. You can store up to 30

channels.

Press [

] to adjust the volume.

World time (Menu 3.5)

Alarm (Menu 3.6)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Use this menu to set alarms to sound at specific times.

Setting an alarm

Setting your local time zone

1. Select the type of alarm.

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

2. Press [Left] or [Right] to select On and press

[Down].

3. Enter the time for the alarm to sound and press

[Down].

2. Press [

] to save the time zone.

4. Press [Left] or [Right] to select AM or PM in 12-

hour time format and press [Down].

Viewing and setting a foreign time zone

5. Select the day(s) on which you want to the alarm

to ring.

1. From the world map, press [Down].

2. Press [Left] or [Right] to select the foreign time

zone you want.

6. Select the Alarm tone line and select an alarm

melody.

3. Press [

] to save the time zone.

7. Press <Save> and then <Yes> to set the alarm.

Applying Daylight Savings Time (DST)

1. From the world map, press <Options> and select

Stopping an alarm

•

When an alarm sounds, press <OK> or any key.

Set daylight saving time

2. Press [ ] to check the time zone(s) you want.

3. Press <Save>.

When a wake-up call alarm sounds, press <OK> or

[

] to stop the alarm.

Menu functions

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

3. Enter the second number.

4. Press [

] to view the result.

Converter (Menu 3.8)

Setting the alarm to ring even if the phone is

off

Use this menu for common conversions, such as

temperature.

From the Alarm screen, select Auto power

→

On.

Performing a conversion

1. Select the convertor type you want.

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Calculator (Menu 3.7)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

3. Enter the value to be converted.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

1. Enter the first number.

Press the left soft key to insert a decimal point or

brackets.

4. Press [Down].

5. Press [Left] or [Right] to select the unit you want

to convert to.

Press [ ] or [ ] to move the cursor

The equivalent value for the amount you entered

displays.

2. Select the operation for your calculation by

pressing one of the Navigation keys according to

the illustration on the display.

Timer (Menu 3.9)

Browser (Menu 4)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

Using the WAP browser, you can access up-to-date

information and a wide variety of media content, such

as wallpapers, ring tones, and music files.

Starting the timer

1. Press <Set>.

To access this menu, press <Menu> in Idle mode and

2. Enter the length of time you want to count down

select Browser

and press <OK>.

3. Press [

] to start counting down.

Home (Menu 4.1)

Stopping the timer

Use this menu to connect your phone to the network

and load the home page of the wireless web service

•

Press <Back> or any key when the timer rings.

Press [ ] on the Timer screen to stop the timer

before it rings.

provider. You can also press [

] in Idle mode.

Navigating with the WAP browser

Stopwatch (Menu 3.10)

Press

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The maximum measurement time is 10 hours.

scroll through browser items

select a browser item

return to the previous page

return to the home page

[Up] or [Down].

1. Press [

2. Press [

] to start the stopwatch.

] to check an interval. You can repeat

Back> or [C].

this step for a total of 4 intervals.

and hold [C].

3. To reset the stopwatch, press <Reset>.

Menu functions

•

File manager: switch to the File manger

menu. p. 64

Selecting and using the browser menu options

ꢀ

Press [ ] or select

on the top of the screen.

Exiting the WAP browser

•

Back: go back to the previous page.

Press [ ] to exit the browser.

Home: go back to the home page.

Exit: exit the WAP browser.

Bookmarks (Menu 4.2)

Reload: reload the current page.

Use this menu to save URL addresses in order to

quickly access websites.

Show URL: display the URL address of the current

web page. You can also set the current page as the

home page for the WAP browser.

Adding a bookmark

1. Select an empty location.

2. Enter a name for the bookmark.

•

About: view the WAP browser certificate and

version information.

3. Enter a URL address and press [

Using WAP page options

From any WAP page, press [ ] to access the following

options:

Accessing a bookmarked page

Scroll to a bookmark item and press [

•

Go to URL: enter a URL address manually.

Using bookmark options

Bookmarks: switch to the Bookmarks menu.

Scroll to a bookmark and press <Options> to access

the following options:

ꢀ

Menu 4.2

Messages: check the Inbox

box in the My messages menu. You can also

create and send a new SMS message. p. 51

•

Outbox, and Draft

•

Go: access the bookmarked website.

Edit: edit the address and name of the bookmark.

Delete: delete the selected bookmark.

ꢀ

•

GPRS settings: customise the following GPRS

network settings:

Go to URL (Menu 4.3)

Use this menu to manually enter the URL address of a

website and access the website.

When the proxy is set to Enable

Proxy IP: enter the proxy IP address.

Clear cache (Menu 4.4)

Proxy port: enter the proxy port number.

APN: enter the access point name of the GPRS

network gateway.

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

Profile settings (Menu 4.5)

Password: enter the password.

Use this menu to set up servers for the WAP browser.

Contact your service provider for details about your

setting options.

When the proxy is set to Disable

DNS 1: enter the primary address.

DNS 2: enter the secondary address

For each server, the following options are available:

APN: enter the access point name of the GPRS

network gateway.

•

Profile name: assign a name to the server profile.

Home URL: set the address of your home page.

Bearer: select a bearer for each type of network

address accessed.

Password: enter the password

•

GSM settings: customise the following GSM

network settings:

•

Proxy: select whether or not the phone uses a

proxy server to launch the WAP browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

When the proxy is set to Enable

Proxy IP: enter the proxy IP address.

Proxy port: enter the proxy port number.

Menu functions

Dial number: enter the PPP server phone number.

Messages (Menu 5)

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use WAP push message and cell broadcast

message features.

Password: enter the password.

Data call type: select a data call type.

When the proxy is set to Disable

To access this menu, press <Menu> in Idle mode and

DNS 1: enter the primary address.

DNS 2: enter the secondary address.

Dial number: enter the PPP server phone number.

select Messages

Create new message (Menu 5.1)

Use this menu to create and send SMS, MMS, or

e-mail messages.

Password: enter the password.

Data call type: select a data call type.

Text message (Menu 5.1.1)

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

Current profile (Menu 4.6)

Use this menu to select a connection profile for

accessing the WAP browser.

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

1. Enter your message.

2. Press <Options> to access one of the following

Multimedia message (Menu 5.1.2)

options:

Multimedia Message Service (MMS) allows you to send

or receive multimedia messages containing a

combination of text, image, video, and audio, from

phone to phone or from phone to e-mail.

•

Save and send: both save a copy of the

message and send the message.

Send only: send the message.

Insert: add a template, Phonebook entry, or

bookmark.

•

1. Select the Subject line.

2. Enter the message subject and press [

•

Add picture/Add animation/Add melody:

3. Select the Picture & Video line.

attach a picture, animated image, or melody.

Attach: attach a name card or calender data

as a data format attachment.

Save to: save the message in the Draft or My

folder box.

Language select: change the language used

in the text input mode.

Text style: change the text attributes.

4. Select Pictures or Videos and select a category.

5. Select a photo and press <Add>.

If you select a video clip, press the left soft key

and select Add

6. Select the Sound line.

7. Select a category and a sound file, and press

<Add>.

3. When you have finished, press <Options> and

select Save and send or Send only

The maximum size allowed for an MMS message

can differ depending on the country. If you

cannot attach another file, add another page.

4. Enter a destination number.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

8. Select the Message line.

9. Enter the message text and press [

5. Press [

] to send the message.

Menu functions

10.While composing the message, press <Options

•

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward.

to access the following options:

Depending on the field status or selected field,

available options vary.

•

Attach: attach a name card or calender data.

Remove subject

the subject or text.

Remove media Remove sound: remove an

added photo, video, or sound.

11.When you have finished, press <Options> and

select Send

/Remove message: clear

•

Add: add a message subject or text.

Edit: edit the message subject or text.

Add image/Add video/Add sound: add a

photo, video, or sound. Depending on the file

type or DRM (Digital Rights Management) system,

•

some files may not be able to be forwarded

12.Enter a phone number or e-mail address.

•

Change image Change video Change

sound: change an added photo, video, or

sound.

Preview: display the message you have

created.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

13.Press [

] to send the message.

•

Send: send the message.

Email (Menu 5.1.3)

Save to: save the message in the Draft or My

folder box. You can also save the message as

an MMS template.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

You can send e-mails that include text and media files,

such as images, videos, and audio. To use this feature,

you need to subscribe to an e-mail service and set up

•

your e-mail account and profile.

ꢀp. 61, p. 62

1. Select the Subject line.

2. Enter the subject of your e-mail and press [

•

Remove: delete the selected attachment or all

attachments.

Remove all attachments: delete all

attachments.

3. Select the Message line.

4. Enter the e-mail text and press [

5. Select the File attach line.

8. When you have finished, press <Options> and

select Send

9. Enter an e-mail address.

6. Press <Options> and add media files to your

e-mail by using the following options:

•

Add image

music: add photos, videos, sounds, or music

/Add videos/Add sounds/Add

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

files. Depending on the file type or DRM (Digital

Rights Management) system, some files may not

10.Press [

] to send the e-mail.

be able to be forwarded

•

Other files: add files in unsupported format.

Attach: add name cards or calendar data.

My messages (Menu 5.2)

Use this menu to store all of the messages you have

received, sent, failed to send, or saved to send it later.

7. While composing the e-mail, press <Options> to

access the following options:

Inbox (Menu 5.2.1)

•

Edit: edit the subject or text.

View: open the attached file.

Send: send the e-mail.

Save to: save the e-mail in the Draft or My

folder box.

This folder stores all of the messages you have

received, except for e-mails and CB messages.

Viewing a message at the time of its receipt

When a message has been received, the phone alerts

you by:

•

Remove subject/Remove message: clear

•

Displaying a message icon with text notification

the subject or text.

Menu functions

•

Sounding a tone or vibrating, depending on the

message alert setting.

While viewing the message list, press <Options> to

access the following options:

•

View: open the message.

To read a message immediately, press <View> and

select a message from the Inbox.

Retrieve: retrieve the MMS message from the

server.

For an MMS notification, press <Options> and select

Retrieve. The message is downloaded from the MMS

server to the phone’s memory.

•

Delete: delete the selected message or all

messages.

Move to my folder: move the message to the My

folder box.

Viewing a message in the Inbox

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

Move to phone/SIM: move the SMS message to

the phone’s memory or the SIM card.

•

Sort by: change the sort order of the messages.

•

SMS/WAP push messages/Delivery report

Protection: protect the message from being

deleted.

MMS

MMS notification

•

Properties: view the message properties.

• Depending on the DRM (Digital Rights

Management, you may not be able to forward

some messages. They are indicated by the

icon.

Using message options

While viewing a message, press <Options> to access

the following options:

•

icon next to a message icon indicates high

SMS messages

priority. A grey-coloured message icon

indicates low priority.

•

Reply via: send a reply message via SMS or MMS.

Forward: forward the message to other people.

•

Delete: delete the message.

Move to phone SIM: move the SMS message to

the phone’s memory or the SIM card.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Cut media: save media content from the message

into your phone’s memory.

•

Add to block list: add the sender’s number to the

Block number list.

Properties: view the message properties.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

WAP push messages

•

Go to URL: connect to the URL from which the

message is sent.

Cut media: save media content from the message

into your phone’s memory.

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

Protection: protect the message from being

deleted.

Delete: delete the message.

Print via bluetooth: print the selected message

by connecting the phone to a printer via Bluetooth.

Delivery report messages

•

Cut address: extract URL, e-mail addresses, or

phone numbers from the message.

MMS messages

•

Reply via SMS: send a reply message via SMS.

•

Delete: delete the message.

Reply via MMS to: send a reply message via

MMS.

Protection: protect the message from being

deleted.

•

Forward: forward the message to another person.

Draft (Menu 5.2.2)

Delete: delete the selected message or all

messages.

This folder stores messages you have saved to send at

a later time.

Menu functions

Press <Options> to access the following options:

While viewing a message or the message list, press

<Options> to access the following options:

•

View: display the message.

Edit: edit the message.

Send: send the message.

•

Cancel sending: cancel sending the message, if

the message is being sent.

•

View: display the message.

Delete: delete the selected message or all

messages.

Send (again): send the message.

Edit: edit the message.

•

Move to my folder: move the message to the My

folder box.

Delete: delete the selected message or all

messages.

Move to phone/SIM: move the SMS message to

the phone’s memory or the SIM card.

•

Move to my folder: move the message to the My

folder box.

•

Sort by: change the sort order of the messages.

Move to phone/SIM: move the SMS message to

the phone’s memory or the SIM card.

Protection: protect the message from being

deleted.

•

Sort by: change the sort order of the messages.

•

Properties: view the message properties.

Print via bluetooth: print the selected message

by connecting the phone to a printer via Bluetooth.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Protection: protect the message from being

deleted.

In this folder, the following icons are available:

•

Properties: view the message properties.

•

Messages that the phone is sending

Sentbox (Menu 5.2.4)

Messages that the phone has failed to send

This folder stores messages that you have sent.

While viewing a message or from the message list,

press <Options> to access the following options:

The phone checks for new e-mails and retrieves

received e-mails.

•

View: display the message.

The following icons may appear on the message

list; depending on the e-mail states, icons may

vary:

Forward: forward the message to other people.

Delete: delete the selected message or all

messages.

•

has been read

has not been read

is being retrieved from the server

has not been retrieved

•

Move to my folder: move the message to the My

folders box.

Move to phone/SIM: move the SMS message to

the phone’s memory or the SIM card.

icon next to a message icon indicates

•

Sort by: change the sort order of the messages.

high priority. A grey-coloured message icon

indicates low priority.

Print via bluetooth: print the selected message

by connecting the phone to a printer via Bluetooth.

3. Scroll to an e-mail or header and press [

•

Protection: protect the message from being

deleted.

4. If the e-mail has more than one page, press [

to scroll through pages one by one.

]

•

Properties: view the message properties.

Press and hold [

page.

] to move to the first or last

Email box (Menu 5.2.5)

5. Select an attached file to view or play it.

This folder stores e-mails that you have received.

1. Select an e-mail account.

6. Press [ ] or [ ] to move to the previous or next

e-mail.

2. Press <Yes> when Check new mail is displayed

to get new mails from the server.

Menu functions

While viewing the e-mail content or e-mail list, press

While viewing a header or e-mail, press <Options> to

access the following options:

<Options> to access the following options:

•

Retrieve: retrieve one or all e-mails.

Options may vary depending on the status of the

e-mail.

Open file: open the attached file.

Save file: save the attached file in the phone’s

memory.

•

View: display the e-mail.

Retrieve: retrieve one or all e-mails from the

e-mail server.

•

Reply to: send a reply message to the sender or

to the sender and all of the other recipients.

•

Reply to: send a reply message to the sender or

to all of the other recipients.

•

Forward: forward the e-mail.

Delete: delete the e-mail.

•

Forward: forward the e-mail.

Add to block list: add the sender’s e-mail

address or the e-mail subject to the Block list

Mark as read: mark the e-mail as read.

Delete selection: delete the selected e-mail.

Delete all: delete all e-mails.

•

Cut address: extract e-mail addresses, URLs, and

phone numbers from the e-mail.

Move to my folder: move the retrieved e-mail to

the My folder box.

Cut attachment: save the selected attachment or

all attachments from the e-mail into your phone’s

memory.

•

Sort by: sort the e-mails by size, subject, data, or

senders’ e-mail addresses.

•

Print via bluetooth: print the selected e-mail by

connecting the phone to a printer via Bluetooth.

•

Protection: protect the e-mail from being deleted.

Properties: view the e-mail properties.

•

Protection: protect the e-mail from being deleted.

Properties: view the e-mail properties.

3. Press <Options> to access the following options:

My folder (Menu 5.2.6)

•

Edit: edit the template.

Send message: send a new message using

the template.

Use this menu to store and manage your messages.

Press <Options> to access the following options:

•

View: display the message.

Edit: edit the message.

Send: send the message.

•

Delete: delete the template.

MMS template (Menu 5.3.2)

Your phone has 11 preset MMS messages, which

cannot be deleted. You can create a new MMS

template and send the template.

Delete: delete the selected message or all

messages.

•

Sort by: change the sort order of messages.

Scroll to an MMS template and press [

the template.

] to display

Protection: protect the message from being

deleted.

While viewing a message, press <Options> to access

the following options:

•

Properties: view the message properties.

Templates (Menu 5.3)

•

Replay: replay the template.

Send: send the template.

Edit: edit the template.

Use this menu to create, edit, or send text or

multimedia templates.

Delete: delete the template.

Text template (Menu 5.3.1)

Use this menu to preset frequently used text

messages.

While viewing the template list, press <Options> to

access the following options:

1. Select an empty location.

•

View: display the template.

2. Enter a message and press [

Send message: send the template.

Menu functions

•

Edit: edit the template.

•

Validity period: set the length of time your

messages are stored in the SMS centre.

•

Add new: add a new template.

Message type: set the default message type. The

network can convert the messages into the

selected format.

Delete: delete the selected template or all

templates.

Delete all (Menu 5.4)

•

Service centre: store or change the number of

your message centre.

Use this menu to delete messages in each message

folder one by one, or all at once. You can also delete

all messages in all folders at one time.

Block number: specify phone numbers from which

messages will not be accepted. Numbers specified

here are also included in the MMS blocking list.

Settings (Menu 5.5)

Multimedia message (Menu 5.5.2)

You can configure the default MMS settings for sending

or receiving messages.

Use this menu to set up various options for using the

messaging service.

Text message (Menu 5.5.1)

Send settings: set up the following options for

sending multimedia messages:

You can configure the default SMS settings for sending

messages.

•

Delivery report: set the network to inform you

when your message has been delivered.

Send settings: set up the following options:

•

Reply path: allow the recipient to reply to you

through your message centre.

Address hiding: set your address to be hidden

from the recipient’s phone.

•

Delivery report: set the network to inform you

when your message has been delivered.

Read reply: determine whether or not the phone

sends a read-reply request.

•

Priority: set the priority level of your outgoing

messages.

Home reception and Roaming reception have

the following options:

Expiry Date: set the length of time your

messages are stored in the MMS centre.

Automatic: the phone automatically retrieves

messages from the server.

Delivery after: set a time delay before messages

are sent.

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use the

Retrieve option to manually download new

messages.

Send size: select maximum size of attached items

allowed for an MMS message.

Receive settings: set up the following options for

receiving multimedia messages:

MMS profiles: configure required network settings for

MMS. The last profile accessed is automatically

activated for sending or receiving subsequent

messages.

•

Anonymous reject: reject messages from

anonymous senders.

Check with your service provider before you change

any MMS settings on your phone.

•

Advert allowed: accept advertisements.

Report allowed: send a delivery report from the

network to the sender.

•

Current profile: select a profile.

•

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Profile settings: customise the following options

for each profile:

Profile name: assign a name to the MMS profile.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

Server URL: enter the address of your MMS

server.

Proxy: connect to the GPRS network using the

proxy server.

Menu functions

GPRS settings: customise the settings required

for connecting to the GPRS network.

Block number: specify phone numbers from which

messages will not be accepted. Numbers specified

here are also included in the SMS blocking list.

IP address: (when the proxy is set to Enable)

enter the IP address.

Email (Menu 5.5.3)

Port: (when the proxy is set to Enable) enter

the port number.

You can configure the default network settings that

are required to send or receive e-mails.

DNS1: (when the proxy is set to Disable) enter

the primary address.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

DNS2: (when the proxy is set to Disable) enter

the secondary address.

Send settings: set up the following options for

sending e-mails.

APN: enter the access point name used for the

address of the GPRS network.

•

Send copy to self: send a copy of your e-mail to

your own e-mail address.

Delivery confirm: set the network to inform you

when your e-mail has been delivered.

Password: enter the password.

Version: select an available OMA version and

maximum size limit for sending or receiving

messages.

Read confirm: send a request for a reply along

with your e-mail.

Priority: select the priority level of your outgoing

e-mail.

Depending on your service provider, it may not

be possible to support the maximum limit

295KB. In this case, try again after changing

the setting to 100KB.

Include signature: select to attach your name,

phone number, or a simple memo to your e-mail

using the Edit name

and Edit note options.

Edit telephone number

•

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

•

Edit name: enter your name.

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject e-mails

that exceed the specified size.

Edit telephone number: enter your phone

number.

•

Edit note: enter a simple memo.

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

Receive settings: set up the following options for

receiving e-mails.

Email account: set up your e-mail account(s) and

select the one to be used:

•

Check interval: determine how often the phone

checks the server for incoming e-mails.

You cannot change e-mail account settings while an

e-mail is being sent or retrieved. Your e-mail

service provider can give you the information

needed for the below settings.

If you set this option to Not used, you can use the

Check new mail feature to check your e-mail

manually.

Read reply: determine whether or not the phone

sends a read-reply request.

•

Current account: select an account.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

Account settings: configure up to five e-mail

accounts using different e-mail servers.

The following options are available for each

account:

Retrieve option: determine whether the phone

retrieves headers only or the entire e-mail.

In use: select this option to use the account and

to display the account in Email box

Menu functions

Account name: enter a name for the currently

When the protocol type is IMAP4:

selected account.

IMAP4 server: enter the IP address or domain

User name: enter a name to be displayed as the

name of the server that receives your e-mail.

sender’s name in your outgoing e-mails.

IMAP4 port: enter the IMAP4 port number.

Email address: enter your e-mail address.

Include attachments: select this option to

Reply address: enter the e-mail address to which

receive attachments with e-mails.

you want recipients to send reply messages.

Max. Emails retrieved: set the number of

User ID: enter your e-mail ID.

headers you will retrieve from the server.

Password: enter your e-mail password.

Email profile: configure the network settings

required to send or receive e-mails.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

•

Current profile: select a profile.

Profile settings: configure up to five e-mail

profiles. For each profile, the following options are

required to connect to the GPRS network:

When the protocol type is POP3

POP3 server: enter the IP address or domain

name of the server that receives your e-mail.

Profile name: enter a name for the e-mail profile.

APN: enter the access point name used for the

GPRS network address.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using the

APOP login scheme when this option is selected.

Password: enter the password.

DNS1: enter the primary address.

•

Read: open received messages.

DNS2: enter the secondary address.

The Temporary box saves network messages until

the phone is switched off.

Block list: specify e-mail addresses from which

messages will not be accepted. You can also specify

message subjects that you will not accept.

The Archive box saves network messages

indefinitely. Press <Options> and select Save to

save messages to the Archive box when a text

notification appears.

Push message (Menu 5.5.4)

You can change the settings for receiving WAP push

messages from the wireless web server. The following

options are available:

•

Receive: enable or disable the reception of

broadcast messages.

Channel: specify the channels from which you

receive broadcast messages.

•

Receive: set how your phone receives WAP push

messages.

When you select Respective channels, you can

set up a list of active CB channels.

•

Service centre: specify the address of the server

from which you want to receive WAP push

•

Language: select the language(s) in which

broadcast messages display.

messages, the Receive option is set to SMS-C

specific

Please contact your service provider for details.

Broadcast messages (Menu 5.6)

Memory status (Menu 5.7)

The Cell Broadcast service delivers short messages on

various topics, such as weather, sports, or traffic.

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the memory currently in use in each folder.

Use this menu to change the settings for the service

and to access broadcast messages.

Menu functions

Videos (Menu 6.2)

File manager (Menu 6)

This menu displays video clips you have recorded,

downloaded, or received in messages.

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

To access this menu, press <Menu> in Idle mode and

select File manager

Playing a video clip

1. Select a video folder.

According to the DRM (Digital Rights Management)

system, web content may not be able to be

forwarded. The content is indicated by the

2. Scroll to a clip and press [

ꢀp. 78

icon

Using video options

While viewing the video list, press <Options> to

access the following options.

Images (Menu 6.1)

This menu displays photos you have taken and images

downloaded or received in messages.

•

Play: play the video clip.

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Viewing an image

•

Delete: delete the selected video clip or all video

clips.

1. Select an image folder.

2. Scroll to an image and press [

•

Rename: change the name of the video clip.

Using image options

Move to favourite videos: move the file to the

Favourite videos folder.

While viewing an image or the image list, press

Options> to access options. p. 74

ꢀ

•

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Delete: delete the selected file or all files.

Settings: change the default settings for playing

music files.

ꢀp. 38

•

Protection: protect the video clip from being

deleted.

•

Rename: change the file name.

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

Properties: view the video clip properties.

Music (Menu 6.3)

•

Protection: protect the file from being deleted.

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

Properties: view the file properties.

Sounds (Menu 6.4)

Playing a music file

This menu displays sound files you have recorded,

downloaded, or received in messages.

Scroll to a file and press [

].ꢀp. 37

Using music options

Playing a sound clip

While viewing the music list, press <Options> to

1. Select a sound folder.

access the following options:

2. Scroll to a clip and press [

].ꢀp. 40

•

Play: play the files.

Using sound options

Send via: send the file via e-mail or Bluetooth.

Add play list: add the file to the play list.

While viewing the sound list, press <Options> to

access the following options:

Set as: set the file as your ring tone, alarm tone,

or a caller alert melody for a Phonebook entry.

•

Play: play the sound clip.

Menu functions

•

Send via: send the sound clip via MMS,

e-mail, or Bluetooth.

While viewing the file list, press [

following options:

] to access the

•

Set as: set the sound clip as your ring tone, alarm

melody, or a caller alert melody for a Phonebook

entry.

•

Send via: send the file via e-mail or Bluetooth.

Delete: delete the selected file or all files.

Rename: change the file name.

Delete: delete the selected sound clip or all sound

clips.

Share for Bluetooth: set whether or not to

prevent this file from being accessed from other

Bluetooth devices.

•

Rename: change the name of the sound clip.

Move to favourite sounds: move the sound clip

to the Favourite sounds folder.

•

Protection: protect the file from being deleted.

Properties: view the file properties.

•

Share for Bluetooth: set whether or not to

prevent the sound clip from being accessed by

other Bluetooth devices.

Memory status (Menu 6.6)

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

•

Protection: protect the sound clip from being

deleted.

Properties: view the sound clip properties.

Other files (Menu 6.5)

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

•

Sort by: sort items by the type of event.

Calendar (Menu 7)

The calendar feature enables you to keep track of your

schedule and to-do list, and to view missed alarm

events.

Delete: delete the event(s).

Missed alarm events: view events whose alarms

you have missed.

•

Memory status: view the memory status for

items stored in the phone’s memory.

To access this menu, press <Menu> in Idle mode and

select Calendar

Creating an event

Consulting the calendar

You can schedule events on the calendar.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date highlighted.

Entering a new scheduled event

1. Scroll to a date on the calendar.

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

2. Press <Options> and select Create

→

Schedule.

3. Enter information or change the settings in the

following entry fields:

•

Scheduled event

To-do item

•

Anniversary

•

Subject: enter the event subject.

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

Miscellaneous

Press <Options> to access the following options:

•

View mode: change the view mode of the

calendar.

•

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

•

Create: add a new event.

Go to: go to the current date or enter a specific

date.

Menu functions

•

AM/PM: select AM or PM in 12-hour time

format.

•

Alarm: select to set an alarm for the

anniversary.

before: set how long before the event the

alarm is to alert you.

Alarm time: enter the time for the alarm to

sound.

AM/PM: select AM or PM in 12-hour time

format.

•

Location: enter information about the event

location.

Alarm: select to set an alarm for the event.

before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: select to set the event to recur and a

repeat unit.

Until: if the event will recur, set the ending

date.

•

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

•

4. Press <Save> to save the event.

Entering a new Miscellaneous

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a new anniversary

1. Select a date on the calendar.

→

Miscellaneous

2. Press <Options> and select Create

→

Anniversary

3. Enter information or change the settings in the

following entry fields:

3. Enter information or change the settings in the

following entry fields:

•

Subject: enter the title of the event.

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

•

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Viewing an event

Square brackets on a calendar date indicate the

following type of events scheduled for that day:

•

Blue: Scheduled event

Red: To-do item

•

Orange: Anniversary

Green: Miscellaneous

•

Alarm: set an alarm for the event.

before: set how long before the event the

alarm is to alert you.

1. Select a date on the calendar to display the events

for the day.

2. Select an event to view its details.

•

Alarm tone: select an alarm tone.

While viewing an event or the event list, press

4. Press <Save> to save the event.

Options> to access the following options:

View: display the event details.

Edit: edit the event.

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

•

→

To do.

•

Create: add a new event.

3. Enter information or change the settings in the

following entry fields:

•

Send via: send the event via SMS, MMS,

e-mail, or Bluetooth.

•

To do: enter information about the task.

Start date: enter the starting date.

Due date: enter the ending date.

•

View mode: change the view mode of the

calendar.

Done/Undone: mark the to-do item as done, or

not.

Priority: select a priority level of the task.

4. Press <Save> to save the event.

Sort by: sort items by the type of event.

Menu functions

•

Delete: delete the event(s).

•

To-do priority; its colour indicates the priority

level (Red: high, Blue: normal, and Grey: low)

•

Print via bluetooth: print the selected event by

connecting the phone to a printer via Bluetooth.

Week view

Missed alarm events: view events whose alarms

you have missed.

You can view miscellaneous and scheduled events for

the selected week.

Memory status: view the memory status for

items stored in the phone’s memory.

A cell on the timetable indicates the presence of event

information. Select the cell that contains the event you

want.

Viewing an event in different mode

Viewing a missed alarm event

By default, the calendar appears in Month view mode.

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

Press <Options> and select View mode to change

the mode.

•

Press <View> to view the corresponding event.

Day view

Press <Exit>.

You can view events for the selected date. Select an

event to view its details.

Accessing missed alarm events

The following icons will be displayed according to the

event’s type and status:

1. Press <Options> and select Missed alarm

events

•

Alarm set

2. Select an event.

Recurring event

Completed to-do item

Using missed alarm options

From the event list, press <Options> to access the

following options:

•

View: display the event details.

Delete: delete the event.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

Delete all: delete all events.

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

Taking a photo

You can take photos in various modes using the

phone. The camera produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Taking a photo with the phone open

1. Access the Camera menu to turn on the camera.

The image to be captured appears on the display.

Menu functions

2. Adjust the image by aiming the camera lens at the

subject.

•

Shooting mode: take a photo in the following

modes:

•

Press the left soft key to access camera

options. See the next section.

Use the keypad to change camera settings or

Single shot: take a photo in normal mode.

Multi shot: take a series of action stills. Select the

number of photos the camera will take and the rate

at which the photos are taken.

•

switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 73

]

Mosaic shot: take several stills and save them in

one frame. Select the number of still images the

camera will take.

4. To

Press

•

Effects: change the colour tone or apply a special

use photo options

delete the photo

Options>.

ꢀ

p. 74

effect to the photo.

•

Frames: apply a decorative frame to the photo.

Delete> and then

Flash: determine the flash use.

<Yes>.

Timer: set a time delay before the camera takes a

photo.

return to Capture mode

[

•

Go to photos: go to the Photos folder.

Using camera options in Capture mode

Settings: change the default settings for taking a

photo.

In Capture mode, press the left soft key to access the

following options:

Size: select an image size.

•

Record video: switch to Record mode.ꢀp. 75

Quality: select an image quality setting.

View finder: select a preview screen.

Using the keypad in Capture mode

ISO: change the ISO setting, which controls the

sensitivity of your camera. For low light situations,

lower the ISO number to increase the quality.

You can use the keypad to customise your camera

settings in Capture mode.

Keys

Function

The higher the ISO number, the faster the camera

shutter functions and the more sensitive the

camera is to light. Higher ISO settings may bring

some distortion to an image.

Flips the image vertically.

Shows the mirror image.

Left/Right Adjusts the brightness of the image.

Spot focus: adjust the exposure based on a

specific area of the image. Select On to display the

spot focus frame in the middle of the image, and

change the exposure according to the brightness of

the image fragment in the frame.

Up/Down

Zooms in or out.

Switches to Record mode.

ꢀp. 75

Changes the image size.

Shutter sound: select the sound that you hear

when you press the shutter release, [

Changes the image quality.

Changes the camera mode.

Zoom sound: turn on or off the sound that you

hear when zooming in.

Changes the colour tone or applies a

special effect to the photo.

Brightness sound: turn on or off the sound that

you hear when adjusting the image brightness.

Reduces the distortion on the image to

maximise detail and sharpness.

Default name: change the default prefix of the

photo name.

•

Camera short cuts: view the functions of the

keys you can use.

Selects a decorative frame.

Menu functions

•

Share for Bluetooth: set whether or not to

prevent the photo from being accessed from other

Bluetooth devices.

Keys

Function

Sets the timer.

Print via bluetooth: print the selected photo by

connecting the phone to a printer via Bluetooth.

Goes to the Photos folder

Determines the flash use.

Changes the preview screen.

•

Protection: protect the photo from being deleted.

Properties: view the photo properties.

Viewing a photo

Using photo options

1. In Capture mode, press the left soft key and select

After taking a photo, press <Options> to access the

following options:

Go to photos

2. Scroll to a photo and press [

While viewing a photo or the photo list, press

•

Take another: return to Capture mode to take

another photo.

<Options> to access the following options:

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

List: return to the photo list.

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

•

View: view the photo on the full screen.

•

Send via: send the photo via MMS, e-mail, or

Bluetooth.

•

Delete: delete the photo.

•

Set as: set the photo as your wallpaper for the

displays or as a caller ID image for a Phonebook

entry.

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

•

Edit: decorate the photo by adding emoticons or

applying a frame or special effect.

4. To

flip the image vertically

Press

[

•

Delete: delete the photo.

show the mirror image

Rename: change the name of the photo.

Move to favourite images: move the photo to

the Favourite images folder.

adjust the brightness of

the image

•

Slide show: display all photos in turn as a slide

show. Select the length of time for which each

photo is displayed.

zoom in

[

5. Press [

]

to take a photo. The photo is

Share for Bluetooth: set whether or not to

prevent the photo from being accessed from other

Bluetooth devices.

automatically saved in the Photos folder.

Recording a video

Print via bluetooth: print the selected photo by

connecting the phone to a printer via Bluetooth.

You can record a video of what is displayed on the

camera screen and save it.

•

Protection: protect the photo from being deleted.

Recording a video with the phone open

1. In Capture mode, press [

Properties: view the photo properties.

1] to switch to Record

Taking a photo with the phone closed

1. Press and hold [

2. If necessary, press [

mode.

2. Adjust the image by aiming the camera lens at the

subject.

] to display

•

Press the left soft key to access camera

options. See the next section.

3. Adjust the image by aiming the camera lens at the

subject.

Menu functions

•

Use the keypad to change camera settings or

switch to other modes. p. 77

•

Timer: set a time delay before the camera starts

recording.

ꢀ

3. Press [

4. Press [

]

to start recording.

•

Go to videos: go to the Videos folder.

]

or the right soft key to stop recording.

Settings: change the following settings for

recording a video:

The video is automatically saved in the Videos

folder.

Recording mode: select a video recording mode.

Select Limit for MMS to record a video suitable

for an MMS message. The video clip is saved in

3GP format.

5. To

Press

play back the video clip

use video options

[

Select Normal to record a video within the limit of

the currently available memory.

the left soft key.

ꢀp. 77

delete the video clip

return to Record mode

[C] and then <Yes>.

Size: select a frame size.

the right soft key.

Quality: select an image quality setting.

Audio rec.: record audio with a video clip.

Using camera options in Record mode

Zoom sound: turn on or off the sound that you

hear when zooming in.

In Record mode, press the left soft key to access the

following options:

Brightness sound: turn on or off the sound that

you hear when adjusting the video image

brightness.

•

Take a photo: switch to Capture mode.ꢀp. 71

Effects: change the colour tone or apply a special

effect to a video.

Default name: change the default prefix of the

video clip name.

•

Flash: determine the flash use.

•

Camcorder short cuts: view the functions of the

keys you can use.

Keys

Function

Reduces the distortion on the image to

maximise detail and sharpness.

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Mutes or unmutes the audio.

Sets the timer.

Keys

Function

Goes to the Videos folder.

Determines the flash use.

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Using video options

Left/

Right

After recording a video clip, press the left soft key to

access the following options:

Up/

Zooms in or out.

Down

•

Record another: return to Record mode.

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Switches to Capture mode.

ꢀp. 71

Changes the frame size.

•

Delete: delete the video clip.

Changes the image quality.

Rename: change the name of the video clip.

Go to videos: go to the Videos folder.

Changes the video recording mode.

Protection: protect the video clip from being

deleted.

Changes the colour tone or applies a special

effect to the video image.

Menu functions

•

Properties: view the video clip properties.

•

Send via: send the video clip via MMS, e-mail, or

Bluetooth.

Playing a video clip

1. In Record mode, press the left soft key and select

•

Delete: delete the video clip.

Rename: change the name of the video clip.

Go to videos

Move to favourite videos: move the video clip to

the Favourite videos folder.

2. Scroll to a video clip and press [

During playback, use the following buttons on the

display:

•

Share for Bluetooth: set whether or not to

prevent the video clip from being accessed from

other Bluetooth devices.

Keys

Function

•

Protection: protect the video clip from being

deleted.

Pauses or resumes playback.

Stops playback.

Down

Left

Right

Properties: view the video clip properties.

Skips backward through a file.

Skips forward through a file.

Adjusts the volume.

Recording a video with the phone closed

1. Press and hold [

2. If necessary, press [

] to display

3. Adjust the image by aiming the camera lens at the

subject.

After playing back the video clip, press the left soft key

to access the following options:

•

Play: play the video clip.

Settings (Menu 9)

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

4. To

flip the image vertically

Press

[

show the mirror image

To access this menu, press <Menu> in Idle mode and

adjust the brightness of

the image

select Settings

Time & Date (Menu 9.1)

zoom in

[

Use this menu to set the current time and date on

your phone. Before setting the time and date, specify

5. Press [

6. Press [

]

to start recording.

to stop recording. The video clip is

your time zone in the World time menu.

ꢀp. 43

•

Set time: enter the current time.

automatically saved in the Videos folder.

AM/PM: select AM or PM in 12-hour time format.

Time format: select the time format.

Set date: enter the current date.

Date format: select the date format.

Phone settings (Menu 9.2)

Many different features of your phone’s system can be

customised to suit your preferences.

Menu functions

Language (Menu 9.2.1)

Side key (Menu 9.2.4)

Use this menu to select one of several languages for

the display text.

Use this menu to set what the phone does when you

press and hold [

] during an incoming call.

Mute: mute the call ringer.

Reject: reject the incoming call.

•

Greeting message (Menu 9.2.2)

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

Extra settings (Menu 9.2.5)

You can turn the automatic redialling or answering

feature on or off, and lock the exposed keys.

Short cut (Menu 9.2.3)

You can use the Navigation keys as shortcut keys to

access specific menus directly from Idle mode. Use

this menu to assign a shortcut menu to a key.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

Assigning a menu to a key

•

Anykey answer: answer an incoming call by

pressing any key, except [ ], <Reject>,

1. Select a key to be used as a shortcut key.

2. Press <Options> and select Change

and [

When this option is not selected, you must press

] or <Accept> to answer a call.

3. Scroll to a menu to be assigned to the key.

4. Press <Save>.

[

•

Voice clarity: increase the microphone’s

sensitivity to allow the other person on the phone

to hear your voice clearly, even though you may be

whispering.

Using shortcut options

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment.

Remove all: deactivate all shortcut assignments.

Active folder: answer an incoming call by opening

the phone.

•

Cover keylock: lock the exposed keys to keep

accidental presses from affecting the phone’s

operation with the phone closed.

Calendar (Menu 9.3.3)

Use this menu to display the calendar of the current

month on the idle screen.

Skin (Menu 9.3.4)

Display settings (Menu 9.3)

You can select a skin colour for Menu mode.

Use this menu to change settings for the display and

light.

LCD brightness (Menu 9.3.5)

Wallpaper (Menu 9.3.1)

You can adjust the brightness of the display for

varying lighting conditions.

You can set up the idle screen on both displays.

Backlight (Menu 9.3.6)

•

Main display: select an image to be displayed on

the main display.

You can select the length of time the backlight stays

on and the display is on in Dim mode, in which the

backlight is off.

•

Cover display: select an image or enter text to be

displayed on the external display.

•

Main LCD on: select the length of time the

backlight is on.

Text display (Menu 9.3.2)

You can customise the text appearance for the idle

screen.

•

Main LCD dim: select the length of time the

display is in Dim mode after the backlight turns off.

After a specified time, the display turns off.

•

Text position: select a text position on the

display. If you don’t want to display text in Idle

•

Show cover indicators: set whether or not the

cover display icons are shown on the external

display.

mode, select Off

•

Text style: select a text style.

Text colour: select a text colour.

Menu functions

Vibration: the phone vibrates but not rings.

Dialing font colour (Menu 9.3.7)

Vibration then melody: the phone vibrates three

times and then starts ringing.

Use this menu to display numbers in colours when

entering a phone number for dialling.

Keypad tone (Menu 9.4.2)

Show caller information (Menu 9.3.8)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to show a caller’s phone number, or

name if saved in Phonebook, on the main display after

you have missed a call. You can also select With

cover display to show caller information on the

external display.

You can adjust the keypad tone volume using

[

]

in Idle mode.

Message tone (Menu 9.4.3)

Sound settings (Menu 9.4)

Use this menu to set up the ringer for incoming

messages and e-mails.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

•

Tone: select one of several message tones.

Alert type: specify how you are to be informed of

any incoming messages.

Use this menu to select a volume and alert type for

incoming calls.

•

Repetition: specify how often the phone informs

you of a new message.

•

Ring tone: select a ring tone for the call ringer.

Volume: select a ringer volume.

Power on/off (Menu 9.4.4)

Alert type: specify how you are to be informed of

incoming calls.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

Melody: the phone rings using the selected ring

tone.

Folder tone (Menu 9.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

phone has completed an operation or that an error

occurs.

Quiet mode (Menu 9.4.6)

Network services (Menu 9.5)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Vibration: set the phone to vibrate.

Call diverting (Menu 9.5.1)

Mute: mute all sound settings.

This network service reroutes incoming calls to a

phone number that you specify.

Extra tones (Menu 9.4.7)

Use this menu to customise additional tones for the

phone.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by the network or when your

phone is switched off.

•

Connection tone: set the phone to beep when it

is connected to the system.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

•

Cancel all: cancel all call diverting options.

•

Indicative tones: set the phone to beep when a

pop-up window appears to indicate that your

2. Select the type of calls to be diverted.

Menu functions

3. Select Activate. To deactivate call diverting, select

•

Change barring password: change the call

barring password.

Deactivate

4. Move to the Divert to line.

2. Select the type of calls to be barred.

5. Enter the number to which calls are to be diverted

3. Select Activate. To deactivate call barring, Select

and press <OK>.

Deactivate.

6. If you selected No reply, move to the Sec line and

select the length of time the network delays before

diverting a call.

4. Enter the call barring password and press <OK>.

Call waiting (Menu 9.5.3)

This network service informs you when someone is

trying to reach you while you are on another call.

Call barring (Menu 9.5.2)

This network service allows you to restrict your calls.

1. Select a call barring option:

1. Select the type of calls to which the call waiting

option will apply.

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country and

to your home country.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

2. Select Activate. To deactivate call waiting, Select

Deactivate

Network selection (Menu 9.5.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

•

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

•

Automatic: connect to the first available network

when roaming.

•

Connect to voice mail: connect to the voice mail

server to allow you to listen to your messages. You

can also connect to the voice mail server by

Manual: select the network you want.

pressing and holding [1] in Idle mode.

Caller ID (Menu 9.5.5)

Voice server number: edit the name and number

for the voice mail server.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Band selection (Menu 9.5.7)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

Combined GSM 900/1800, GSM 1900, and Tri band

(GSM 900/1800/1900).

•

Default: use the default setting provided by the

network.

Hide number: ensure your number does not

display on the other person’s phone.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Send number: send your number each time you

make a call.

Voice mail server (Menu 9.5.6)

Use this menu to store the number of the voice mail

server and access your voice mails.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

You must enter the voice server number before you

can access your voice mails. Your service provider

can give you the voice server number.

Menu functions

•

My devices: search for connectable Bluetooth

devices.

Bluetooth (Menu 9.6)

Use this menu to activate the Bluetooth feature.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

• You cannot use the Bluetooth feature while using

multimedia features such as voice recorder,

camera, and MP3 player, or vice versa.

• Some devices may not be compatible with your

phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

Bluetooth services: display available Bluetooth

services.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search new device

Setting up the Bluetooth feature

If you have searched for devices before, the phone

displays More devices along with the devices you

have searched for previously. To search for new

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

devices, select More devices

After searching, a list of devices to which you can

connect displays. The following icons indicate the

kind of device:

When the owner of the other device enters the

same code, pairing is complete.

Some devices, especially headsets or hands-free

car kits, may have a fixed Bluetooth PIN, such as

0000. If the other device has a code, you must

enter it.

•

Hands-free or

headset

•

Mobile phone

•

Computer

Printer

•

PDA

Unknown device

Using device options

From the device list, press <Options> to access the

following options:

The colour of the icon indicates the status of the

the device:

Options may vary depending on the paired device.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

•

Connect/Disconnect: connect to the currently

selected device, or end the connection.

Browse files: search for data from the device and

import data directly to your phone.

3. Select a device.

4. Enter a Bluetooth PIN code and press <OK>. This

code is used just once and you don’t need to

memorise it.

Service list: display available Bluetooth services

for the selected device.

•

Rename: rename the paired device.

Authorize device/Unauthorize device:

determine whether or not the phone asks you to

permit connection when the device tries to connect

to your phone.

Menu functions

•

Delete: remove the selected device or all

displayed devices from the device list.

Security (Menu 9.7)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

If you enter an incorrect PIN /PIN 2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

2. Select the application in which the item you want

to send is stored.

3. Scroll to the item you want and press <Options>.

4. Select Send via

→

Bluetooth.

The phone searches for devices within range and

displays a list of available devices.

PIN check (Menu 9.7.1)

5. Select a device.

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Receiving data via Bluetooth

Change PIN (Menu 9.7.2)

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Phone lock (Menu 9.7.3)

SIM lock (Menu 9.7.6)

This feature locks the phone from unauthorised use.

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

FDN mode (Menu 9.7.7)

The password is preset to 00000000. To change the

password, use the Change password menu.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers specified in

Change password (Menu 9.7.4)

Use this menu to change your phone password. The

password is preset to 00000000

the FDN list.

ꢀp. 33

Privacy (Menu 9.7.5)

To activate this feature, you must enter your PIN2.

Use this menu to lock your media contents, including

MMS messages, e-mails, images, videos, music files,

and sounds.

Change PIN2 (Menu 9.7.8)

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

1. Press [

] to check the item(s) to lock.

Memory status (Menu 9.8)

2. Press <Save> to lock the marked items.

3. Enter the phone password and press <OK>.

To access a locked item, you need to enter the phone

Use this menu to check the amount of memory being

used for storing data in Messages

File manager

Calendar Phonebook, and Java world. You can

password. The password is preset to 00000000

also check the shared memory for MMS, Email, and

File manager.

Reset settings (Menu 9.9)

Solve problems

Help and personal needs

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all of the settings in your phone at the same

time.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

1. Press [

be reset.

] to check the setting category(ies) to

When you switch on your phone, the following

messages may appear:

“Insert SIM card”

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been enabled. You

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

•

4. Enter the phone password and press <OK>.

The password is preset to 00000000. To

•

must enter the phone’s password before you can use

the phone.

change the password, use the Change

password menu.

ꢀp. 89

“Enter PIN”

•

You are using your phone for the first time. You must

enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered. To

disable this feature, use the PIN check menu.

“Enter PUK”

The PIN code has been entered incorrectly three times

•

in succession, and the phone is now blocked. Enter the

PUK supplied by your service provider.

“No service,” “Network failure,” or “Not done”

displays

The phone starts beeping and “Battery low”

flashes on the display

•

The network connection has been lost. You may be in a

weak signal area. Move and try again.

•

Your battery is insufficiently charged. Recharge the

battery.

•

You are trying to access an option for which you have

no subscription with your service provider. Contact the

service provider for further details.

The audio quality of the call is poor

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

You have entered a number but it was not dialled

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Be sure that you have pressed [

Be sure that you have accessed the right cellular

network.

Be sure that you have not set an outgoing call barring

option.

No number is dialled when you re-call a

Phonebook entry

•

Use the Contact list feature to ensure the number has

been stored correctly.

Your correspondent cannot reach you

•

Re-store the number, if necessary.

•

Be sure that your phone is switched on. ([

for more than one second.)

] pressed

If the above guidelines do not help you to solve

the problem, take note of:

Be sure that you are accessing the correct cellular

network.

Be sure that you have not set an incoming call barring

option.

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Your correspondent cannot hear you speaking

Then contact your local dealer or Samsung after-sales

service.

•

Be sure that you have switched on the microphone.

•

Be sure that you are holding the phone close enough

to your mouth. The microphone is located at the

bottom of the phone.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0W/

kg.^*

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

The highest SAR value for this model phone was 0.345 W/

kg.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

Health and safety information

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Pacemakers

Operating environment

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Hearing aids

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Other medical devices

Potentially explosive environments

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in obtaining this

information.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted facilities

Switch off your phone in any facility where posted notices

require you to do so.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep the phone and all its parts and accessories out of

the reach of small children.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

•

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Calendar • 67, 81

Call cost • 31

Call records

Conference call • 29

Connection tone • 83

Convertor • 44

Creating calendar

anniversaries • 68

events • 67

miscellaneous • 68

to-do items • 69

Creating messages

e-mail • 50

language • 80

settings • 81

Diverting, calls • 83

DTMF tones, send • 28

Index

ABC mode, text input • 22

Alarm • 43

Answering

dialled • 30

missed • 30

received • 30

Call time • 31

Caller group

creating • 34

managing • 34

Caller ID • 85

Calls

answering • 25

barring • 84

diverting • 83

holding • 26

redialling • 24

rejecting • 25

transferring • 27

waiting • 84

Camera

E-mails

call • 25

creating/sending • 50

deleting • 56

setting • 60

viewing • 55

Emergency calls • 96

second call • 27

Anykey answer • 80

Auto redial • 80

MMS • 49

SMS • 48

Backlight time, set • 81

Band selection • 85

Barring, calls • 84

Battery

FDN (Fixed Dialling Number)

mode

creating contact list • 33

setting • 89

File manager • 64

FM radio • 41

Forwarding

Deleting

call records • 30

e-mails • 56

events • 70

messages • 52

missed alarms • 71

phonebook 36

photos • 75

charging • 7

low indicator • 8

precautions • 93

Bluetooth

receiving, data • 88

sending, data • 88

settings • 86

e-mails • 56

MMS messages • 53

options • 72

photos • 71

videos • 75

video clips • 78

Delevery report • 53

Delivery reports, message • 58

Dialled calls • 30

Display

Browser, WAP • 45

Games • 40

Greeting message • 80

CB (Cell Broadcast) messages •

Characters, enter • 22

Calculator • 44

phone • 89

SIM card • 89

Low battery indicator • 8

accessing • 57

saving • 50

MP3 player

phone • 89

Phone

Health and safety • 92

Holding, call • 26

care and maintenance •

downloading • 37

options • 38

playing • 37

display • 10

icons • 10

locking • 89

password • 89

resetting • 90

switching on/off • 8

unpacking • 6

Memory status

calendar data • 67

downloaded items • 66

games 41

phonebook 36

shared memory • 89

Message tone • 82

Messages

Icons, description • 10

Images, downloaded • 64

Inbox, messages

e-mail • 55

Multi-party calls • 29

Music, downloaded • 65

Muting

key tones • 28

microphone • 27

My name card • 35

MMS • 53

SMS • 52

International calls • 24

Phonebook

copying • 32

e-mail • 50

greeting • 80

MMS • 49

SMS • 48

web • 53

deleting • 36

editing • 32

managing • 36

options • 32

Java world • 40

Names

entering • 22

searching • 32

Network band, select • 85

Network selection • 84

Key tone volume • 82

Keypad tones

muting/sending • 28

selecting • 82

speed-dialling • 34

Minute minder • 83

Missed alarm events • 70

Missed calls • 30

MMS messages

creating/sending • 49

deleting • 53

setting • 58

viewing • 51

MMS template

Photos

deleting • 75

options • 74

taking • 71

Outbox, messages • 54

Own number • 35

Language, select • 80

Last number, redial • 24

Locking

viewing • 74

PIN, change • 88

PIN2, change • 89

Power on/off tone • 82

Printing

Password

call barring • 84

change• 89

exposed keys • 81

media contents • 89

Index

contact • 32

events • 70

name card • 35

photo • 74, 75

information • 92

Security, calls • 88

Sent messages • 54

SIM card

keypad • 82

message • 82

minute minder • 83

power on/off • 82

Transferring, calls • 27

Privacy • 89

inserting • 7

Problems, solve • 90

locking • 89

SMS messages

creating/sending • 48

deleting • 52

Videos

Quiet mode • 83

deleting • 78

playing • 78

recording • 75

Voice clarity, microphone • 27

Voice mail server

connecting • 85

editing • 85

Voice memos

playing • 40

recording • 39

Voice recorder • 39

viewing • 51

Sound settings • 82

Sounds, downloaded • 65

Speed-dial • 34

Stopwatch • 45

Switching on/off

microphone • 27

phone • 8

Received calls • 30

Received messages

e-mail • 55

Recording

videos • 75

voice memos • 39

Redialling

automatically • 80

manually • 24

Resetting phone • 90

Ringer

incoming calls • 82

messages • 82

Road safety • 93

Roaming • 84

Template

MMS 57

text • 57

Text input mode, change • 22

Text, enter • 22

Timer • 45

Tone

Waiting call • 84

WAP browser

access • 45

bookmarks • 46

cache, clear • 47

World time • 43

connect • 83

folder • 82

Safety

100

Toshiba MK6014MAP User Manual
Sony MDX C5970 User Manual
Sonic Alert msm83c154s User Manual
Siemens SKU TK68E57UC User Manual
Seagate BARRACUDA ST3750528AS User Manual
Samsung Spinpiont HM120JC User Manual
Samsung SGH E335 User Manual
Qualcomm Computer Accessories 43 User Manual
Philips PCA532K User Manual
Philips AZ9143 User Manual