Samsung SGH E700 User Manual

* Some of the contents in this manual may differ from your  
phone, depending on the software installed or your  
service provider.  
DUAL BAND  
GPRS TELEPHONE  
SGH-E700  
ELECTRONICS  
Printed in Korea  
World Wide Web  
Code No.: GH68-04278A  
English. 01/2004. Rev.1.3  
Contents  
Important Safety Precautions ...................... 7  
Unpacking.................................................... 9  
Your Phone ................................................ 10  
Phone Layout.................................................... 10  
Displays ........................................................... 13  
Backlight.......................................................... 17  
Built-in Antenna ................................................ 17  
Getting Started .......................................... 18  
Inserting/Removing the SIM Card ........................ 18  
Installing/Removing/Charging the Battery............. 19  
Switching the Phone On or Off............................. 23  
Selecting Functions and Options .......................... 24  
Call Functions ............................................ 26  
Making a Call .................................................... 26  
Ending a Call..................................................... 29  
Answering a Call................................................ 29  
Rejecting a Call ................................................. 29  
Adjusting the Volume......................................... 30  
Accessing Options During a Call........................... 30  
Using the Ear-microphone................................... 38  
Entering Text ............................................. 39  
Changing the Text Input Mode ............................ 40  
Using the T9 Mode............................................. 41  
Using the ABC Mode........................................... 43  
Using the Symbolic Mode.................................... 45  
Using the Number Mode ..................................... 45  
Using the Menus......................................... 46  
Accessing a Menu Function ................................. 46  
List of Menu Functions........................................ 47  
3
2
Contents  
Contents  
Phonebook Menu........................................ 53  
Phone Settings........................................... 98  
Find Name (Phonebook 1.1) ................................... 53  
Add Entry (Phonebook 1.2) .................................... 56  
Speed List (Phonebook 1.3).................................... 57  
Copy All to Phone (Phonebook 1.4) ......................... 59  
Send All via Infrared (Phonebook 1.5)..................... 60  
Delete All (Phonebook 1.6)..................................... 62  
Own Number (Phonebook 2.1)................................ 63  
Group Setting (Phonebook 2.2)............................... 64  
Memory Status (Phonebook 2.3)............................. 65  
Service Directory (Phonebook 3.1).......................... 65  
Greeting Message (Menu 4.1) ................................ 98  
Display (Menu 4.2)................................................ 99  
Language (Menu 4.3) ........................................... 101  
Security (Menu 4.4).............................................. 102  
Auto Redial (Menu 4.5)......................................... 105  
Side Key (Menu 4.6)............................................. 105  
Fax Mode (Menu 4.7)............................................ 106  
Infrared Activation (Menu 4.8) .............................. 106  
Reset Settings (Menu 4.9) .................................... 107  
Organiser................................................. 108  
Messages ................................................... 66  
New Memo (Menu 5.1) ......................................... 108  
Calendar (Menu 5.2)............................................. 110  
To Do List (Menu 5.3)........................................... 113  
Clock (Menu 5.4).................................................. 114  
Alarm (Menu 5.5)................................................. 116  
Calculator (Menu 5.6)........................................... 118  
Conversion (Menu 5.7) ......................................... 119  
Timer (Menu 5.8) ................................................. 120  
Stopwatch (Menu 5.9) .......................................... 121  
Short Message (Menu 1.1)..................................... 66  
Multimedia Message (Menu 1.2) ............................. 72  
Voice Mail (Menu 1.3)............................................ 83  
Preset Messages (Menu 1.4) .................................. 84  
Broadcast (Menu 1.5) ............................................ 84  
Settings (Menu 1.6)............................................... 86  
Memory Status (Menu 1.7) .................................. 89  
Call Records ............................................... 90  
Network Services..................................... 122  
Missed Calls (Menu 2.1)......................................... 90  
Received Calls (Menu 2.2)...................................... 90  
Dialled Calls (Menu 2.3)......................................... 91  
Delete All (Menu 2.4)............................................. 91  
Call Time (Menu 2.5)............................................. 92  
Call Costs (Menu 2.6) ............................................ 92  
Call Diverting (Menu 6.1)...................................... 122  
Call Barring (Menu 6.2)......................................... 124  
Call Waiting (Menu 6.3) ........................................ 127  
Network Selection (Menu 6.4) ............................... 128  
Caller ID (Menu 6.5)............................................. 129  
Active Line (Menu 6.6).......................................... 129  
Sound Settings........................................... 94  
Fun Box.................................................... 130  
Incoming Calls (Menu 3.1)..................................... 94  
Messages (Menu 3.2)............................................. 95  
Power On/Off (Menu 3.3)....................................... 96  
Connection Tone (Menu 3.4) .................................. 96  
Key Tone (Menu 3.5)............................................. 96  
Minute Minder (Menu 3.6)...................................... 97  
Quiet Mode (Menu 3.7).......................................... 97  
WWW Services (Menu 7.1).................................... 130  
Media box (Menu 7.2)........................................... 137  
JAVA World (Menu 7.3)......................................... 140  
Games (Menu 7.4) ............................................... 144  
5
4
Contents  
Camera .................................................... 148  
Take Photos (Menu 8.1)........................................ 148  
My Photos (Menu 8.2)........................................... 153  
My Albums (Menu 8.3).......................................... 153  
Delete All (Menu 8.4)............................................ 154  
Settings (Menu 8.5).............................................. 154  
Memory Status (Menu 8.6) ................................... 155  
Using ALS (Alternate Line Service) .......... 156  
Solving Problems ..................................... 158  
Access Codes ........................................... 161  
Phone Password ............................................... 161  
PIN................................................................. 161  
PIN2............................................................... 162  
PUK................................................................ 162  
PUK2 .............................................................. 162  
Call Barring Password........................................ 163  
Health and Safety Information................. 164  
Exposure to Radio-Frequency Energy  
(SAR Information) ............................................ 164  
Precautions When Using Batteries....................... 165  
Road Safety..................................................... 167  
Operating Environment ..................................... 167  
Electronic Devices............................................. 168  
Potentially Explosive Atmospheres ...................... 170  
Emergency Calls............................................... 170  
Other Important Safety Information.................... 172  
Care and Maintenance....................................... 172  
Glossary................................................... 174  
Index ....................................................... 178  
Quick Reference Card............................... 183  
6
Important Safety  
Precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road Safety at All Times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching Off When Refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching Off in Aircraft  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Switching Off in Hospitals  
Switch off your phone near medical equipment.  
Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special Regulations  
Meet any special regulations in force in any area  
and always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
7
Important Safety Precautions  
Sensible Use  
Unpacking  
Your package contains the following items:  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on, especially the phone is in  
service.  
Emergency Call  
Ensure the phone is switched on and in service. Key  
in the emergency number for your present location,  
Travel Adapter  
Hand Strap  
Phone  
then press the  
key. If certain features are in  
use, deactivate those features before you can make  
an emergency call. Give all the necessary  
information as accurately as possible. Do not cut off  
the call until given permission to do so.  
Battery  
Water Resistance  
Your phone is not water-resistant. Keep it dry.  
Accessories and Batteries  
Use only Samsung-approved accessories and  
batteries.  
Ear-Microphone  
Owner’s Manual  
Qualified Service  
Note: The items supplied with your phone may be  
Only qualified service personnel may install or  
repair your phone.  
different depending on the country.  
In addition, you can obtain the following  
accessories for your phone from your local  
Samsung dealer:  
For more detailed safety information, see “Health  
and Safety Information” on page 164.  
• Battery charger  
• Simple hands-free kit  
• Wearable Ear-Microphone  
• Data kit  
8
9
Your Phone  
Your Phone  
Closed View  
Phone Layout  
Camera  
The following illustrations show the main elements  
of your phone:  
External  
display  
Camera key  
Open View  
Earpiece  
Key(s)  
Description  
Perform the functions indicated by the  
text above them, on the bottom line of  
the display.  
Folder  
Main display  
(soft keys)  
In Menu Mode, scroll through the  
menu options.  
1
In Idle Mode, the Left key enters the  
New SMS message writing screen,  
the Right key enters the Incoming  
call’s melody setting menu and the  
Up key enters the Calendar menu.  
The Down key enters the Camera  
menu, when pressed and held it  
switches the phone to the capture  
mode.  
Navigation keys  
(Up/Down/Left/  
Soft key (left)  
Right)  
Ear-microphone  
Soft key (right)  
jack  
WAP Browser  
key  
Power On/Off /  
Menu exit key  
Volume/Menu  
browse keys  
Dial/Menu  
confirmation key  
Alphanumeric  
keys  
In Idle Mode, launches the WAP  
(Wireless Application Protocol) browser  
directly.  
Cancel/Back/  
Correction key  
IrDA port  
Microphone  
Special  
function keys  
10  
11  
Your Phone  
Key(s)  
Your Phone  
Description (continued)  
Key(s)  
Description (continued)  
Makes or answers a call.  
(on the left side of the phone)  
In Idle Mode, accesses the call log list.  
In Menu Mode, selects a menu function  
or stores information that you have  
entered, such as a name in the phone  
or SIM memory.  
During a call, adjust the earpiece  
volume.  
In Idle Mode with the phone open,  
adjust the key tone volume.  
When pressed and held at an incoming  
call with the folder closed, reject the  
call or silence the ring tone. See  
page 105.  
Deletes characters from the display.  
When pressed and held in Idle Mode,  
quickly accesses the New memo  
screen.  
In Menu Mode, returns to previous  
menu.  
(on the right side of the phone)  
Turns the camera capture mode on.  
In capture mode, works as a camera  
shutter.  
Ends a call.  
When pressed and held, switches the  
phone on or off.  
In Menu Mode, cancells your input and  
returns to Idle Mode.  
Displays  
Main Display Layout  
When pressed and held in Idle Mode,  
quickly accesses your voice mail  
server.  
The display has three areas:  
Icons  
Enter numbers, letters and some  
special characters.  
Text and  
graphic area  
Used for various purposes in different  
functions.  
When pressed and held while entering  
a phone number, the  
pause.  
key enters a  
Soft keys  
Indications  
Menu  
Phonebook  
When pressed and held in Idle Mode,  
the  
key enters or exits the Quiet  
Mode.  
12  
13  
Your Phone  
Your Phone  
Icon Description (continued)  
Area  
Description  
Appears when you have new or unread  
messages.  
First line  
Displays various icons. See  
page 14.  
Appears when you have new or  
unchecked multimedia messages.  
Middle lines  
Display messages, instructions  
and any information that you  
enter, such as number to be  
dialled.  
Appears when you are retrieving a  
multimedia message.  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
Appears when you set the alarms to ring  
at a specified time.  
Appears when the IrDA port is active. For  
details, see page 106.  
Icons  
Icon Description  
Appears when you connect the phone to  
the computer by the IrDA port.  
Shows the received signal strength. The  
more the number of bars, the stronger  
the signal.  
Appears when you are connected to the  
GPRS network.  
Appears when a call is in progress. When  
your SIM card supports ALS (Alternate  
Line Service), this icon may appears with  
the number 1, 2, or both.  
Appears when the Call diverting feature is  
activated.When your SIM card supports  
ALS (Alternate Line Service), this icon  
may appears with the number 1, 2, or  
both.For example:  
,
,
.
For example:  
,
,
.
Appears when you are at the home zone.  
May be shown only if your service provider  
supports this feature)  
Appears when you are out of a service  
area. When it displays, you cannot make  
or receive calls.  
(
Appears when your are at the office zone.  
Appears when you have new or  
unchecked voice messages. When your  
SIM card supports ALS (Alternate Line  
(May be shown only if your service provider  
supports this feature)  
Service), this icon may appears like  
,
,
.
14  
15  
Your Phone  
Your Phone  
After the backlight turns off, if no key is pressed  
Icon Description (continued)  
within a given period of time, depending on the  
Light time menu option (Menu 4.2.5.2), the  
external display goes into the Off Mode to save the  
power. Press and hold one of the volume keys to  
awake the external display from the Off Mode.  
Appears when you set the alert type for  
incoming calls to Vibration or Vibration  
then melody. For further details, see  
page 94.  
Appears when the Quiet Mode is active.  
Backlight  
Shows the level of your battery. The more  
bars you see, the more power you have  
left.  
The main display and the keypad are illuminated by  
a backlight. When you press any key or open the  
folder, the backlight illuminates. It turns off if no  
key is pressed within a given period of time,  
depending on the Backlight menu option. For  
further details, see page 100.  
Main Display Off Mode  
If you don’t press any key in a minute after  
dimming of the main display, the main display goes  
into the Off Mode to save the power. Press any key  
to awake the main display from the Off Mode.  
Note: The backlight remains on at all times when the  
phone is connected to an optional car kit.  
External Display  
Built-in Antenna  
Your phone has an external display on the folder.  
It indicates that you have an incoming call or  
message, and notifies you at the specified time  
when you set an alarm.  
Your phone has a built-in antenna. As with other  
mobile radio transmitting equipment, do not touch  
the antenna unnecessarily when the phone is  
switched on. Contact with the antenna affects call  
quality and may cause the phone to operate at a  
higher power level than needed.  
It is also an service available indicator. When you  
set the Service light option (Menu 4.2.5.3) to  
Type 1 or Type 2, it works. But the phone is no  
service area, it doesn’t work.  
When you press and hold one of the volume keys  
with the folder closed, the external display’s  
backlight illuminates.  
When the ear-microphone is connected to the  
phone, you can also use the button on it to turn it  
on.  
16  
17  
Getting Started  
Getting Started  
Removing the SIM Card  
To remove the SIM card, slide the card out of the  
holder, as shown.  
Inserting/Removing the SIM Card  
When you subscribe to a cellular network, you are  
provided with a SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available and so on.  
• Keep all miniature SIM cards out of the reach of  
small children.  
• The SIM card and its data can be easily damaged  
by scratches or bending, so be careful when  
handling, inserting or removing the card.  
Installing/Removing/Charging the  
Battery  
• When installing the SIM card, always make sure  
that the phone is switched off before you remove  
the battery.  
Your phone is powered by a rechargeable Li-ion  
battery. Use only approved batteries and chargers.  
Ask your local Samsung dealer for further details.  
Inserting the SIM Card  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
standard battery is fully recharged in  
approximately 130 minutes.  
1. If necessary, remove the battery by referring to  
page 19.  
2. Insert and slide the SIM card under the two  
tabs, ensuring that the notched corner is top left  
and the gold contacts of the card face into the  
phone.  
Installing the Battery  
1. Insert the teeth on the bottom of the battery  
into the corresponding slots on the phone.  
18  
19  
Getting Started  
Getting Started  
2. Press the battery against the back of the phone  
until it clicks into place.  
Charging the Battery by Using the Travel  
Adapter  
Note: The phone can be used while the battery is  
being charged, but this causes the battery to  
charge more slowly.  
1. Plug the connector of the travel adapter into the  
jack at the bottom of the phone.  
Check that the arrow on the connector is facing  
towards the front of the phone.  
Removing the Battery  
1. Switch off the phone by pressing and holding the  
key.  
2. To remove the battery, pull the battery catch  
toward the top of the phone and hold it in that  
position. Lift the battery away from the phone.  
2. Plug the adapter into a standard AC wall outlet.  
While charging, the battery icon at the top right-  
hand corner of the displays repeatedly fills to  
show that the battery is charging.  
20  
21  
Getting Started  
Getting Started  
3. When charging is finished and the battery icon  
becomes solid and “Fully charged” message is  
displayed, disconnect the adapter from the  
power outlet and from the phone by pressing  
the grey tabs on both sides of the connector and  
pulling the connector out.  
Switching the Phone On or Off  
To switch the phone on:  
1. Open the folder.  
2. Hold down the  
switches on.  
key until the phone  
3. If the phone asks for a PIN, enter the PIN and  
press the Ok soft key. For further details, see  
page 161.  
The phone searches for your network and the  
current date and time appear on the main and  
external displays. After finding it, you can make  
or receive a call.  
Service Provider  
Wed 17 Sep 03  
Low Battery Indicator  
12:53  
When the battery is weak and only a few minutes of  
talk time remain, the battery sensor informs you in  
the following ways: an empty battery icon flashes  
12:53  
Wed 17/09  
(
), you hear a warning tone and a message  
repeats at regular intervals on the display.  
Menu  
Phonebook  
When the battery becomes too weak for the phone  
to operate, it switches off automatically.  
Note: To change the language, use the  
Language menu option (Menu 4.3).  
For further details, see page 101.  
To switch the phone off:  
Hold down the  
key until the power-off  
animation displays.  
22  
23  
Getting Started  
Getting Started  
To view various functions/options available or select  
the one is required:  
Selecting Functions and Options  
Your phone offers a set of functions that allow you  
to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
the two soft keys marked  
and  
. Each menu  
and sub-menu allows you to view and alter the  
settings of a particular function.  
Select soft key.  
• function displayed  
• option highlighted  
The roles of the soft keys vary according to the  
current context; the labels or icons on the bottom  
line of the display and just above the soft keys  
indicate their current roles.  
view the next function or Down key.  
highlight the next option  
on a list  
Example:  
move back to the  
previous function or  
option on a list  
Up key.  
Service Provider  
Wed 17 Sep 03  
12:53  
move back up one level  
in the structure  
(or Back) soft  
key or C key.  
return to Idle Mode  
key.  
Menu  
Phonebook  
In some functions, you may be asked for a  
password or PIN. Enter the required code and press  
the Ok soft key.  
1
Press the right soft  
Press the left soft  
key to access the  
Phonebook feature.  
key to access the  
menu functions.  
24  
25  
Call Functions  
Call Functions  
Making an International Call  
1. Press and hold the 0 key for the international  
Making a Call  
prefix. The + character appears.  
2. Enter the country code, area code and phone  
number and press the  
key.  
Using the Number Keypad  
When the idle screen is displayed, enter the area  
Making a Call from Phonebook  
code and phone number, and press the  
key.  
You can store the names and phone numbers called  
regularly in the SIM card and phone’s memory,  
which are jointly called the Phonebook. You then do  
not need to remember all your numbers; simply  
select the required name to recall the associated  
number.  
Note: If you have set the Auto redial option (Menu  
4.5) to On, the number is redialled  
automatically up to ten times if the person you  
called does not answer or the line is busy. For  
further details, see page 105.  
For further details about the Phonebook feature,  
see page 53.  
Correcting the Number  
To clear  
Press the  
Using the Call Logs  
the last digit  
displayed  
C key.  
The phone stores up to 20 calls dialled, received or  
missed chronologically. The last call is saved in the  
first position. If the same number occurs more than  
once, only the latest occurrence is saved.  
any other digit in  
the number  
Left or Right key until the  
cursor (|) is immediately to  
the right of the digit to be  
cleared and press the C key.  
You can also insert a missing  
digit simply by pressing the  
appropriate key.  
To recall any of these numbers:  
1. Press the  
log list.  
key in Idle Mode to access the Call  
the all digits  
displayed  
C key and hold it down for  
more than one second.  
2. Use the Up and Down keys to scroll through the  
list until the number you want highlights.  
The call logs are listed with the following icons:  
: Dialled calls  
: Received calls  
: Missed calls  
26  
27  
Call Functions  
Call Functions  
3. To dial the number, press the  
key.  
Speed-dialling from Phonebook  
To view each call record, see “Call Records” on  
page 90.  
Once you have stored numbers in the Phonebook,  
you can dial a number simply by pressing one or  
two keys. For further details, see page 57.  
Viewing Missed Calls  
If you have a subscription that includes the Caller  
Line Identification (CLI) feature and you are unable  
to answer a call for any reason, you can find out  
who was calling you so that you can call the person  
back.  
Ending a Call  
When you want to finish your call, briefly press the  
key or close the folder.  
The number of missed calls displays on the idle  
screen immediately after a call was missed.  
Answering a Call  
To view the missed calls immediately:  
1. If the folder is closed, open it.  
When somebody calls you, the phone rings and  
displays the incoming call animation.  
2. Press the Missed soft key.  
If the caller can be identified, the caller’s phone  
number, or name if stored in your Phonebook,  
displays.  
The list of the missed calls displays.  
3. If necessary, scroll to the number you want by  
pressing the Up or Down key.  
To answer a call, open the folder. If it is already  
open, press the  
key or Accept soft key.  
4. To dial the number, press the  
key.  
Note: You can answer a call while using Phonebook or  
menu features. The current operation stops.  
To use the missed call options, see “Missed Calls”  
on page 90.  
Note: To clear the missed call notification on the  
Rejecting a Call  
display, press the  
key. When you also  
have voice mails, short messages or  
multimedia messages and multi CBs, the right  
soft key indication changes in the following  
To reject an incoming call, press the  
Reject soft key.  
key or  
order: Missed  
,
Connect, View, CB and  
If the Side key option is set to Reject, you can  
press and hold one of the volume keys on the left  
side of the phone to reject an incoming call; see  
page 105.  
Phonebook  
.
28  
29  
Call Functions  
Call Functions  
Switching the Microphone Off (Mute)  
Adjusting the Volume  
You can temporarily switch your phone’s  
microphone off so that the other person cannot  
hear you.  
During a call, if you wish to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
Example: You may wish to say something to  
another person in the room but do not  
want the calling person to hear you.  
When you hear a sound, such as ringtone, you can  
also adjust the earpiece volume. But it is not fixed.  
Press the  
the  
key to increase the volume level and  
key to decrease it.  
1. Press the Options soft key.  
2. When Mute highlights, press the Select soft  
key.  
The Mute icon (  
) appears on the bottom line  
of the display and your correspondent can no  
longer hear you.  
1
To switch the microphone back on:  
1. Press the Options soft key.  
2. When Unmute highlights, press the Select soft  
key.  
In Idle Mode with the folder open, you can adjust  
the key tone volume using the and keys.  
The Mute icon disappears and your  
correspondent can hear you.  
Note: When a call comes in, you can reject the call or  
mute the call ringer by pressing and holding  
one of the volume keys, depending on your  
setting of the Side key menu option (Menu  
4.6). For further details, see page 105.  
Muting/Sending Key Tones  
You can turn the key tones off or on during a call.  
When the Mute keys option is selected, your phone  
does not transmit the key tones. It allows you to  
press keys without hearing annoying key tones  
during a call.  
Accessing Options During a Call  
To communicate with answering machines or  
computerised telephone systems, the Send keys  
option must be selected.  
Your phone provides a number of control functions  
that you can use during a call.  
30  
31  
Call Functions  
Call Functions  
Putting a Call on Hold  
Answering a Second Call  
You can place the current call on hold whenever you  
want. You can make another call while you have a  
call in progress if this service is supported by the  
network. Of these two calls, one is active and the  
other is on hold and you can switch between the  
calls.  
You can answer an incoming call while you have a  
call in progress, if this service is supported by the  
network and you have activated the Call waiting  
option (see page 127). You will be notified of an  
incoming call by a call waiting tone.  
To answer a call while you have another call in  
progress:  
To place a call on hold, simply press the Hold soft  
key. You can reactivate the call whenever you want  
by pressing the Retrieve soft key.  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
To make a call while you have a call in progress:  
2. To switch between the two calls, press the Swap  
1. Enter the phone number that you want to dial or  
look it up in the Phonebook.  
soft key.  
3. To end the call on hold, press the Options soft  
2. Press the  
key to dial the second call.  
key and select the End held call option.  
The first call is automatically put on hold.  
To end the current call, press the  
key.  
Or alternatively:  
The call on hold is automatically reconnected to  
you.  
1. Put the current call on hold by pressing the Hold  
soft key.  
Transferring a Call  
2. Make the second call in the normal way.  
You can transfer the current call to the call on hold  
if this service is supported by the network, so that  
the callers can talk to each other. You are  
disconnected from both of them.  
To switch between the two calls, simply press the  
Swap soft key.  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other person.  
1. During a call, answer or make a call in the  
normal way, and press the Options soft key.  
To end the call on hold, press the Options soft key  
and select the End held call option.  
2. Press the Up or Down key to select the Transfer  
option and press the Select soft key.  
When you want to finish, end each call normally by  
The two people are connected to each other.  
pressing the  
key.  
32  
33  
Call Functions  
Call Functions  
3. To read a received message, select the Step  
Searching for a Number in Phonebook  
option, and then scroll to the message that you  
want to read.  
You can search for a number in your Phonebook  
during a call.  
To write a new message, select the New  
1. Press the Options soft key.  
message option.  
2. If necessary, press the Up or Down key to  
highlight the Phonebook option. Press the  
Select soft key.  
4. Press the Select soft key.  
For further details about the SMS feature, see  
page 66.  
3. Select the Find name option and press the  
Select soft key.  
Making a Multi-party Call  
The Phonebook entries are listed.  
A multi-party call feature is a network service that  
allows up to six people to take part simultaneously  
in a multi-party or conference call. For more  
information, contact your service provider.  
4. Enter the first a few letters of the name that you  
want to find.  
The Phonebook entries are listed starting with  
the first entry matching your input.  
Setting up the Multi-party Call  
Note: You can also scroll through Phonebook from  
1. Call the first participant in the normal way.  
the beginning, by pressing the Up or Down  
key  
.
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
5. To view the highlighted entry, press the Ok soft  
key.  
3. To join the first participant to the multi-party  
call, press the Options soft key and select the  
Join option. Press the Select soft key.  
For further details about the Phonebook feature,  
see page 53.  
4. To add a new person to the multi-party call, call  
the person in the normal way. Then press the  
Options soft key and select the Join option.  
Press the Select soft key.  
Using the Message Service  
You can read or write a new message during a call.  
1. Press the Options soft key.  
You can add incoming callers by answering the call  
and selecting the Join option. Repeat as needed.  
2. Press the Up or Down key to highlight the  
Message option. Press the Select soft key.  
34  
35  
Call Functions  
Call Functions  
Now you can talk privately with that person. The  
other participants can continue to converse with  
each other  
Having a Second Call During a Multi-party Call  
To answer or make a call when you have the multi-  
party call:  
3. To return to the multi-party call, press the  
1. To place the multi-party call on hold, press the  
Options soft key and select the Join option.  
Hold soft key.  
4. Press the Select soft key.  
2. Answer or make a call in the normal way.  
All of the multi-party call participants can now  
hear each other.  
3. You can reactivate the multi-party call on hold  
by pressing the Retrieve soft key.  
Removing One Participant  
To end the multi-party call on hold, press the  
Options soft key and select the End held  
multiparty option.  
1. Press the Options soft key and select the  
Remove option.  
To answer an incoming call when you have the  
multi-party call in progress and another call on  
hold:  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
The call ends with that participant, but you can  
continue to talk with the other participants.  
1. Press the Accept soft key.  
2. Select the End held option to end the call on  
3. End the multi-party call by closing the folder or  
hold.  
pressing the  
key.  
Or, select the End current option to end the call  
in progress.  
3. Answer the new call by pressing the  
key.  
Having a Private Conversation With One  
Participant  
1. Press the Options soft key and select the Split  
option. Press the Select soft key.  
2. Press the Up or Down key to highlight a  
participant and press the Select soft key.  
36  
37  
Call Functions  
Entering Text  
Using the Ear-microphone  
At many times while you are using your phone, you  
need to enter text, such as when storing a name in  
the Phonebook, writing a new message, creating  
your personal greeting or scheduling events on your  
calendar.  
With the ear-microphone, you can make or answer  
a call without holding the phone.  
When you connect the ear-microphone to the jack  
at the left side of the phone, the button on the  
ear-microphone works as listed below:  
You are provided with the following text input  
modes:  
*
To  
Press  
T9 mode  
This mode allows you to enter words with only  
one keystroke per letter. Each key on the keypad  
has more than one letter – when you press the 5  
key once, J, K or L may be displayed. The T9  
mode automatically compares your keystrokes  
with an internal linguistic dictionary to determine  
the correct word, thus requiring far fewer  
redial the last call  
answer a call  
the button twice in Idle Mode.  
and hold the button when  
you receive the call.  
end a call  
and hold the button when  
you have finished the call.  
keystrokes than the traditional ABC mode.  
ABC mode  
This mode allows you to enter letters by pressing  
the key labelled with the required letter once,  
twice, three or four times until the letter displays.  
Number mode  
This mode allows you to enter numbers.  
Symbolic mode  
This mode allows you to enter special characters.  
*
is a registered trademark of Tegic Communications,  
Inc. and is licensed under U.S. Patent 5,818,437/  
5,953,541/ 6,011,554.  
38  
39  
Entering Text  
Entering Text  
Quickly Changing the Text Input Mode  
Changing the Text Input Mode  
To switch between the  
Number and previous mode  
Symbol and previous mode  
ABC and T9 mode  
Press and hold the  
When you are in a field that allows characters to be  
entered, you will see the text input mode indicator  
at the bottom of the display.  
key.  
key.  
Example: Entering a name in the Phonebook  
right soft key.  
Enter name  
Using the T9 Mode  
To type a word in the T9 mode:  
1. Start entering the word by pressing keys 2 to 9.  
Press each key only once for each letter.  
Text input mode indicator:  
T9 English mode  
20  
Ok  
Eng  
Example: To enter “hello” in the T9 mode, press  
the 4, 3, 5, 5, and 6 keys.  
To change to another text input mode:  
Thewordyouaretypingappearsonthedisplay.  
It may change with each key that you press.  
1. Press the right soft key indicating the current  
text input mode.  
2. Enter the whole word before editing or deleting  
any keystrokes.  
2. Scroll to the mode you want to use by pressing  
the Up or Down key.  
3. If the word is correct, start entering the next  
word. Otherwise, press the 0 key repeatedly to  
display alternative word choices for the keys  
that you have pressed.  
The Language select option allows you to  
change the text input language.  
You can use the Add word option to add new  
words into the T9 dictionary. See page 42.  
Example: Both “of” and “me” have the sequence  
of 6 and 3. The phone displays the  
Note: If you want to exit the menu without  
most commonly used choice first.  
changing the mode, press the  
key.  
soft key or  
4. Insert a space between words by pressing the  
key.  
3. Press the Select soft key to confirm the  
highlighted text input mode.  
5. Continue entering the next word.  
40  
41  
Entering Text  
Entering Text  
If Spell appears above the left soft key while you  
are entering text, the word does not exist in the T9  
dictionary. To type words not found in the T9 mode,  
change the text input mode to the ABC mode, or  
proceed as follows:  
Entering a Number directly  
To enter a number, press and hold the number key.  
Scrolling  
To move the cursor to the left or right within the  
text, press the Left or Right key.  
1. Press the Spell soft key, or press the right soft  
key and select the Add word option.  
Clearing Letters and Words  
2. Enter the word you want to add using the ABC  
To clear the letter to the left of the cursor, press the  
C key. You can clear all of the letters on the display  
by pressing and holding the C key.  
mode (see page 43) and press the Ok soft key.  
The word is saved in the T9 dictionary and  
inserted in the input field.  
Returning to the Previous Screen  
3. Continue entering other words in the T9 mode.  
When the text input field is cleared, press and hold  
the C key to return to the previous screen.  
Smart Punctuation  
To enter periods, hyphens or apostrophes, press the  
1 key. The T9 mode applies rules of grammar to  
insert the correct punctuation.  
Using the ABC Mode  
Example: The 1 key is used twice to display two  
When typing in the ABC mode, press the key  
labelled with the required letter:  
- Once for the first letter  
punctuation marks.  
- Twice for the second letter  
- And so on  
l
e
t
s
e
a
t
.
Example: To display the letter “C, quickly press the  
2 key three times. To display the letter  
“K, press the 5 key twice. This method is  
called Multi-tap typing.  
Changing the Case  
To change the case of the next letter(s) that you  
type, press the key. There are three cases:  
Note: The cursor moves to the right when you press a  
different key. When entering the same letter  
twice or a different letter on the same key, just  
press the Right key or wait a few seconds for  
the cursor to move to the right automatically,  
and then enter the next letter.  
• Lower Case (no indicator)  
• Initial Capital (  
• Capital Lock (  
)
)
Inserting a Space  
To insert a space between words, press the  
Refer to the table for more information about the  
characters available. The characters vary,  
key.  
42  
43  
Entering Text  
Entering Text  
depending on the text input language. You can  
select the language by setting one of the following  
options:  
Entering a Number directly  
To enter a number, press and hold the number key.  
Scrolling  
Language select; see page 40  
To move the cursor to the left or right within the  
text, press the Left or Right key.  
Input mode (Menu 4.3.2); see page 101  
List of the characters available  
Clearing Letters and Words  
Key  
1
Characters in the Order Displayed  
To clear the letter to the left of the cursor, press the  
C key. You can clear all of the letters on the display  
by pressing and holding the C key.  
.
,
-
C
F
I
?
!
@
:
1
2
A
D
G
J
B
E
H
K
2
Returning to the Previous Screen  
3
3
When the text input field is empty, press and hold  
the C key to return to the previous screen.  
4
4
5
L
5
6
M
P
N
O
R
V
Y
6
S
8
Z
Using the Symbolic Mode  
7
Q
U
X
7
9
The Symbolic mode enables you to enter symbols in  
your text.  
8
T
W
0
9
0
To  
Press the  
(Capital Lock mode in English  
)
display more  
symbols  
Up or Down key.  
Changing the Case  
To change the case of the next letter(s) that you  
enter a symbol  
corresponding number key.  
type, press the key. There are three cases:  
return to the  
previous text input  
mode  
Ok or  
soft key.  
• Lower Case (no indicator)  
• Initial Capital (  
• Capital Lock (  
)
)
Using the Number Mode  
Inserting a Space  
To insert a space between words, press the  
key.  
The Number mode enables you to enter numbers in  
your text. Press the keys corresponding to the  
digits you want to enter.  
44  
45  
Using the Menus  
Using the Menus  
Example: To access the Voice mail menu option,  
press the Menu soft key, 1, 3 in Idle Mode.  
The phone offers a range of functions that allow you  
to tailor the phone to your needs. These functions  
are arranged in menus and sub-menus.  
List of Menu Functions  
Accessing a Menu Function  
Various menus let you check or change your phone  
settings. The following list shows the menu  
structure.  
The menus and sub-menus can be accessed by  
pressing the Menu or Phonebook soft key in Idle  
Mode, then scrolling with the navigation keys.  
The numbers assigned to each menu option may  
not match the menu number on the phone. It  
depends on the services supported by your SIM  
card.  
1. In Idle Mode, press the Menu soft key to access  
the main menu or press the Phonebook soft  
key to access Phonebook menu.  
Phonebook Menu  
2. Scroll through the menus using the Left or Right  
key.  
1. Phonebook (see page 53)  
3. Find the sub-menu that you wish to use by  
scrolling with the Up or Down key.  
1.1 Find name  
1.2 Add entry  
1.3 Speed list  
4. Press the Select soft key to access the sub-  
1.4 Copy all to phone  
1.5 Send all via infrared  
1.6 Delete all  
menu.  
If the menu that you have selected contains  
further sub-menus, repeat steps 3 and 4.  
2. Management (see page 63)  
5. Scroll to the option you want to choose with the  
Up or Down key.  
2.1 Own number  
2.2 Group setting  
2.3 Memory status  
6. Press the Select soft key to choose the setting.  
3. Services (see page 65)  
Note: You can return to the previous menu level by  
pressing the  
soft key.  
3.1 Service directory  
You can also access the menus and sub-menus by  
quickly entering the corresponding menu number.  
46  
47  
Using the Menus  
Using the Menus  
2.5 Call time  
2.5.1 Last call time  
Main Menu  
2.5.2 Total sent  
2.5.3 Total received  
1. Messages (see page 66)  
1.1 Short message  
1.1.1 Inbox  
2.5.4 Reset timers  
*
2.6 Call costs  
1.1.2 New message  
1.1.3 Outbox  
1.1.4 Delete all  
1.2 Multimedia message  
1.2.1 Inbox  
2.6.1 Last call cost  
2.6.2 Total cost  
2.6.3 Max cost  
2.6.4 Reset counters  
2.6.5 Set max cost  
2.6.6 Price/Unit  
1.2.2 New message  
1.2.3 Outbox  
1.2.4 Draft  
3. Sound settings (see page 94)  
1.2.5 My folder  
1.2.6 Delete all  
1.3 Voice mail  
1.3.1 Connect to voice mail  
1.3.2 Voice server number  
1.4 Preset messages  
1.5 Broadcast  
1.5.1 Read  
3.1 Incoming calls  
3.1.1 Default melodies  
3.1.2 My sounds  
3.1.3 Ring volume  
3.1.4 Alert type  
3.2 Messages  
3.2.1 Short message  
3.2.2 Multimedia message  
3.3 Power on/off  
3.4 Connection tone  
3.5 Key tone  
3.6 Minute minder  
3.7 Quiet mode  
1.5.2 Receive  
1.5.3 Channel  
1.5.4 Language  
1.6 Settings  
1.6.1 Short message  
1.6.2 Multimedia message  
1.7 Memory status  
1.7.1 Short message  
1.7.2 Multimedia message  
4. Phone settings (see page 98)  
4.1 Greeting message  
4.2 Display  
2. Call records (see page 90)  
4.2.1 Wallpaper  
4.2.2 Skin  
4.2.3 Backlight  
4.2.4 LCD brightness  
4.2.5 Front LCD  
4.3 Language  
2.1 Missed calls  
2.2 Received calls  
2.3 Dialled calls  
2.4 Delete all  
4.3.1 Text language  
4.3.2 Input mode  
* Shown only if supported by your SIM card.  
48  
49  
Using the Menus  
Using the Menus  
4.4 Security  
4.4.1 PIN check  
6. Network services (see page 122)  
6.1 Call diverting  
6.1.1 Divert always  
4.4.2 Change PIN  
4.4.3 Phone lock  
4.4.4 Change password  
4.4.5 Privacy  
4.4.6 SIM lock  
4.4.7 FDN mode  
6.1.2 Busy  
6.1.3 No reply  
6.1.4 Unreachable  
6.1.5 Cancel all  
*
6.2 Call barring  
4.4.8 Change PIN2*  
6.2.1 All outgoing  
6.2.2 International  
6.2.3 International except to home  
6.2.4 All incoming  
6.2.5 Incoming while abroad  
6.2.6 Cancel all  
4.5 Auto redial  
4.6 Side key  
4.7 Fax mode  
4.8 Infrared activation  
4.9 Reset settings  
4.9.1 Sound settings  
4.9.2 Phone settings  
4.9.3 All settings  
6.2.7 Change barring password  
6.3 Call waiting  
6.4 Network selection  
6.5 Caller ID  
5. Organiser (see page 108)  
*
6.6 Active line  
5.1 New memo  
5.2 Calendar  
5.3 To do list  
5.4 Clock  
5.4.1 Set time  
5.4.2 Set date  
5.4.3 Set world time  
5.4.4 Set format  
5.5 Alarm  
5.6 Calculator  
5.7 Conversion  
5.7.1 Currency  
5.7.2 Length  
5.7.3 Weight  
5.7.4 Volume  
5.7.5 Area  
7. Fun box (see page 130)  
**  
7.1 WWW Services  
7.1.1 Home  
7.1.2 Bookmark  
7.1.3 Go to URL  
7.1.4 Clear cache  
7.1.5 Proxy settings  
7.1.6 Current proxy  
7.1.7 Push messages  
7.2 Media box  
7.2.1 Photos  
7.2.2 Images  
7.2.3 Sounds  
7.2.4 Delete all  
7.2.5 Memory status  
5.7.6 Temperature  
5.8 Timer  
5.9 Stopwatch  
*Shown only if it is supported by your SIM card  
** May not be shown or supported by your network service  
provider.  
* Shown only if it is supported by your SIM card.  
50  
51  
Using the Menus  
Phonebook Menu  
Phonebook offers the following features:  
7.3 JAVA world  
7.3.1 Downloads  
7.3.2 DNS setting  
7.3.3 Memory status  
7.4 Games  
Phonebook: allows you to find, create or set up  
the speed-dialling feature and manage  
Phonebook entries.  
7.4.1 Honey ball  
7.4.2 Go! Hamster  
7.4.3 Bowling  
Management: allows you to create or remove  
your own number, set up caller groups and check  
the memory status.  
8. Camera (see page 148)  
Services: allows you to use the service directory  
depending on your SIM card.  
8.1 Take photos  
8.2 My photos  
8.3 My albums  
8.4 Delete all  
8.5 Settings  
8.6 Memory status  
Find Name (Phonebook 1.1)  
To search for a number in the phonebook, proceed  
as follows.  
9. SIM AT(Application Toolkit)*  
1. Enter a letter(s) of the name that you want to  
find.  
The Phonebook entries are listed, highlighting  
the entry matching your input.  
2. If necessary, press the Up or Down key to scroll  
to the entry you want.  
3. Once you have found the entry, press the Ok  
soft key.  
4.  
To  
Press the  
dial the displayed  
number  
key.  
change the  
Phonebook entries  
Options soft key. For  
further details, see  
page 54.  
*Shown only if it is supported by your SIM card.  
52  
53  
Phonebook Menu  
Phonebook Menu  
The following options are available:  
Changing the Phone Memory Entries  
Edit number  
Scroll to the category that you want to edit by  
pressing the Left or Right key. Following categories  
are available and you can edit information of each  
category by pressing the Options soft key.  
This option allows you to change the number. You  
can also add a new number if none has been stored  
for the selected category.  
Category Then  
Change name  
Mobile  
Home  
Office  
Fax  
Select one of the following options. For  
details for these options, refer to the  
page 55.  
This option allows you to change the name of the  
entry.  
To clear the old name, press the C key. For more  
information about how to enter characters, see  
page 39.  
Edit number  
Change name  
Other  
Send message (shown if the category  
contains a number)  
Send message  
This option allows you to send a message to the  
number. For more information about how to send a  
message, see page 69.  
Copy (shown if the category contains a  
number)  
Send via infrared (shown if the  
category contains a number)  
Copy  
Delete entry  
This option allows you to copy the entry from the  
phone’s memory to the SIM card, and vice versa.  
E-Mail  
Group  
Graphic  
Alert  
Enter or edit e-mail address.  
Set one of the groups or no group.  
Set one of the images or no image.  
Set one of the melodies or not assign.  
Send via infrared  
This option allows you to copy the entry from your  
phone to another device that has the IrDA port via  
infrared.  
Delete entry  
Changing the SIM Memory Entries  
This option allows you to delete the entry from  
Phonebook. To confirm the deletion, press the Yes  
soft key. Otherwise, press the No soft key.  
To change the SIM memory entry’s information,  
press the Options soft key.  
54  
55  
Phonebook Menu  
Phonebook Menu  
6. When you are satisfied, press the Ok soft key.  
Add Entry (Phonebook 1.2)  
7. If you select Phone in step 3, go to step 8.  
You can store phone numbers and the  
If you select SIM in step 3, enter the location  
number and press the Ok soft key.  
corresponding names in the memory of your SIM  
card. In addition, you can store up to 1000 names  
in the phone memory and each name can be  
associated with up to five numbers.  
8. If you want to change the entry, use the options.  
for information about how to do it, see page 54.  
1. Enter the number you want to save.  
If you want to return to Idle Mode, press the  
soft key or the  
key.  
Notes  
:
• If you make a mistake while entering a number,  
correct it using the  
page 26.  
C
key. For further details, see  
Storing a Number in Idle Mode  
To insert a dialling pause for special phone  
services, such as banking by phone, hold down  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in the Phonebook.  
the  
key. “P” is displayed to indicate the pause.  
Continue the procedure from step 1 on page 56 to  
store the number.  
2. When you are sure that the number is correct,  
press the Save soft key.  
3. Select the memory where the number is to be  
stored, either Phone or SIM, and press the  
Select soft key.  
Speed List (Phonebook 1.3)  
Note: If you change phones, any numbers stored  
in your SIM card will automatically be  
available with the new phone, whereas any  
numbers stored in the phone’s memory  
must be stored again.  
You can set up to eight speed-dial entries and then  
dial them easily whenever you want, simply by  
pressing the associated number key.  
Setting Up Speed-dial Entries  
4. If you select SIM in step 3, go to step 5.  
1. Press the Up or Down key to scroll to an empty  
If you select Phone in step 3, choose a number  
type using the Up or Down key and press the  
Select soft key.  
location and press the Select soft key.  
2. When the Edit number option highlights, press  
the Select soft key.  
5. Enter the associated name.  
3. Enter a phone number and press the Ok soft  
For information about how to enter characters,  
see page 39.  
key. Or,  
56  
57  
Phonebook Menu  
Phonebook Menu  
To retrieve a number from your Phonebook,  
press the Phonebook soft key. Select an entry  
from the list and press the Ok soft key. Press  
the Ok soft key to save it.  
Dialling a Number Stored in the SIM Card  
Once you have stored phone numbers in your SIM  
card, you can dial them easily whenever required.  
To dial a number stored in the SIM card:  
4. When you have finished, press the  
the key to exit.  
soft key or  
1. Enter the number of the SIM card location where  
the number you want to dial is stored.  
Editing the Speed-dial Entries  
2. Press the  
key.  
1. Select the speed-dial entry you want to edit  
The display shows the name and number stored  
in that location.  
from the list and press the Select soft key.  
2. Select one of the following menu options by  
pressing the Up or Down key and press the  
Select soft key:  
3. Press the Dial soft key or the  
key.  
Edit number: allows you to change the  
number.  
Copy All to Phone (Phonebook 1.4)  
Change name: allows you to change the  
name of the entry.  
You can copy all of the numbers stored in the SIM  
card to the phone’s memory.  
Delete: allows you to clear the setting so that  
1. When a confirming message appears, press the  
no number is assigned to the key.  
Yes soft key to copy.  
3. When you have finished, press the  
the key to exit.  
soft key or  
The number are copied to the phone’s memory,  
labelled with Mobile by default.  
Otherwise, press the No soft key.  
Using the Speed-dial Feature  
2. When you have finished, press the  
the key to exit.  
soft key or  
When the idle screen is displayed, press the number  
key, 2 to 9, assigned to the speed-dial entry and  
press the  
key. You can also press and hold the  
number key.  
Note: The  
1
key is reserved for your voice mail server  
number.  
58  
59  
Phonebook Menu  
Phonebook Menu  
Send All via Infrared (Phonebook 1.5)  
Via the infrared connection, you can send your  
Phonebook entries to another IrDA- compliant  
devices and vice versa.  
Note: This feature may not be available depending on  
the devices.  
IrDA port  
IrDA port  
Sending Your Phonebook  
1. Align the IrDA ports on both sides each other.  
Receiving Phonebook from Another Device  
2. Access the Send all via infrared menu option  
in the Phonebook menu and choose one of the  
following options and press the Select soft key:  
1. Align the IrDA ports on both sides each other.  
2. Access the Infrared activation menu (Menu  
4.8) and select On to activate the port.  
All: allows you to send all of the entries, from  
the entry you choose to the end of the SIM  
card and Phone list.  
3. When your phone receives Phonebook data from  
the other device:  
SIM: allows you to send all of the entries,  
from the entry you choose to the end of the  
SIM card list.  
If the other person sends you one entry, your  
phone displays the name and the phone number  
and you can specify whether or not you want to  
save it. Continue to step 4.  
Phone: allows you to send all of the entries,  
from the entry you choose to the end of the  
Phone list.  
If the person sends you the entries by All, SIM,  
Phone you can select a memory location, SIM  
card or phone’s memory. Continue to step 5.  
3. When you select All, your phone displays all of  
the Phonebook entries.  
4. Press the Save soft key to store the entry.  
When you select SIM or Phone, all of the  
entries stored in the corresponding memory  
location are listed.  
You can also delete the entry by pressing the  
Cancel soft key.  
4. Scroll to the entry you want to send and press  
5. Press the SIM or Phone soft key.  
the Select soft key.  
The entries are saved in the appropriate  
memory.  
Your phone begins sending the entry(ies).  
60  
61  
Phonebook Menu  
Phonebook Menu  
Delete All (Phonebook 1.6)  
Own Number (Phonebook 2.1)  
You can delete Phonebook entries selectively  
depending on the memory location, or all entries at  
once.  
To store your own phone number(s) with a name:  
1. Scroll to an empty location by pressing the Up or  
Down key and press the Select soft key.  
1. Scroll to a desired memory selection and place a  
check mark ahead of it by pressing the Select  
soft key.  
2. When Edit number highlights, press the Select  
soft key.  
Selecting All places check marks on all of the  
3. Enter your number and press the Ok key.  
memories.  
4. To assign a name, press the Down key to move  
2. If necessary, repeat step 1 to check another  
options.  
to Change name and press the Select soft key.  
5. Enter a name and press the Ok soft key.  
3. When you have finished checking, press the Ok  
6. When you have finished, press the  
the key to exit.  
soft key or  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the entries in the  
memory(ies). Then enter the phone password  
and press the Ok soft key.  
To remove one of your numbers:  
1. Select the entry you want to delete from the  
Own number list and press the Select soft key.  
The password is preset to “00000000” by  
default. To change it, see page 103.  
2. Scroll to Delete by pressing the Up or Down key  
and press the Select soft key.  
Otherwise, press the No soft key.  
3. When a confirming message appears, press the  
Yes soft key to delete the number.  
Otherwise, press the No soft key.  
4. When you have finished, press the  
the key to exit.  
soft key or  
62  
63  
Phonebook Menu  
Phonebook Menu  
Group Setting (Phonebook 2.2)  
Memory Status (Phonebook 2.3)  
You can change the settings of the five predefined  
caller groups.  
You can check how many names are stored in SIM  
card and phone’s memory.  
When you have finished, press the  
the key to exit.  
soft key or  
1. Select a caller group by pressing the Up or Down  
key and press the Select soft key.  
2. Scroll to a setting option by pressing the Up or  
Down key and press the Select soft key.  
Service Directory (Phonebook 3.1)  
The following options are available:  
Melody: allows you to select a melody to  
sound when a call comes in from a member in  
the group.  
Note: This feature may not be available depending on  
your SIM card.  
The display shows the list of the numbers in the  
Service directory.  
Change name: allows you to change the  
name of the group; for further details about  
how to enter characters, see page 39.  
If necessary, scroll to a number by pressing the Up  
or Down key and press the  
number.  
key to dial the  
View image: shows the image to display  
when a call comes in from a member in the  
group.  
3. Change the setting as required and press the  
Select soft key.  
4. Repeat steps 2 and 3 to change other options.  
When you have finished, press the  
the key to exit.  
soft key or  
64  
65  
Messages  
Messages  
Note: To clear the new message notification on the  
display, press the key. When you also  
This menu allows you to create, send, read and  
save messages with the Short Message Service  
(SMS: text message), Enhanced Message Service  
(EMS: message including simple image, animation  
or melody) and Multimedia Message Service  
(MMS: message supporting the presentation of  
various media types, such as full colour images and  
polyphonic ring tones). Voice mails are also  
available.  
have missed calls, voice mails, short messages  
or multimedia messages, and multi CBs, the  
right soft key indication changes in the  
following order: Missed, Connect, View, CB  
and Phonebook  
.
Managing memory  
Inbox and Outbox share a given amount of memory  
in your phone or SIM card. When the message  
Note: This feature is only available if your service  
provider’s network supports it. Contact your  
service provider for more information.  
memory is full, the New message icon (  
and an error message displays. (It disappears when  
you press the key, but it reappears if you  
) blinks  
don’t delete old messages.) In this case, you cannot  
receive any new messages. You must delete one or  
more old messages to get free memory for new  
messages using the Delete option within the Inbox  
or Outbox or the Delete all option; for further  
details, see page 72.  
Short Message (Menu 1.1)  
Short message service (SMS) allows you to send  
and receive short text messages to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to make short messages  
consisting of simple pictures, melodies, animations  
and styled text all of which adds a new dimension to  
simple text messages.  
Inbox (Menu 1.1.1)  
Your phone receives incoming messages and saves  
them in the Inbox. SMS is usually saved in the SIM  
card, but if the SIM memory is full, the incoming  
messages will be saved in the phone’s memory.  
To send text messages by phone, you must obtain  
the number of the SMS centre from your service  
provider.  
When the Inbox menu is selected, the list of  
messages received displays with the:  
Receiving a new message  
When you receive a new message, the New  
• sender’s phone number, or name if stored in the  
Phonebook.  
message icon (  
) and a text notification showing  
the number of the message appear on the display.  
You also hear an alert, depending on the message  
sound setting; for further details, see page 95.  
• message status;  
message to read or  
message.  
for a read message,  
for an incomplete  
for a  
To read the new message(s) immediately, press the  
View soft key. The list of the messages appears.  
66  
67  
Messages  
Messages  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
New Message (Menu 1.1.2)  
Using this menu, you can write messages,  
containing text, images and melodies.  
• date and time when the message was received.  
• memory where the message was stored;  
for  
1. Create a message.  
the SIM card or  
for the phone’s memory.  
• message contents.  
On the first line of the display, you see the  
number of remaining characters you can enter,  
the number of current message and the  
maximum messages you can create, and the  
font style you set in Text option.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
To scroll through the message contents, press the  
Up or Down key. When you focus on an object that  
includes a melody, the melody is played.  
Note: For further information about how to enter  
characters, see page 39.  
You can choose the following options by pressing  
the Options soft key:  
2. While entering your message, press the  
Options soft key to use the following options.  
Delete: allows you to delete the message.  
Send: allows you to send the message. Refer  
to the next step.  
Message reply: allows you to reply by sending a  
message.  
Text: allows you to format the text. Following  
text attributes can all be combined as  
required.  
Call back: allows you to call the sender back.  
Cut number: allows you to send a message to the  
number or paste the number into Phonebook.  
Text size: Small/Medium/Large  
Text mode: Normal/Underscore/Strikethrough  
Bold: On/Off  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
Italic: On/Off  
Extract media: you can save media (except the  
predefined EMS animations and sounds) from the  
message into Media box. You can use these items  
when writing a message; for further details, see  
page 69.  
Alignment: Left/Center/Right  
Add media: allows you to add pictures,  
animations and/or melodies to the message.  
Select a category; Add picture, Add  
animation or Add melody. You can then  
choose a factory-set object or an object that  
you have received from another source and  
stored in the Media box. See page 137.  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory.  
69  
68  
Messages  
Messages  
Preset messages: allows you to add a preset  
Outbox (Menu 1.1.3)  
message to your text. Select one of nine  
messages stored in the Preset messages  
menu option (Menu 1.4). See page 84.  
Outbox stores any messages that you have already  
sent or just saved without sending.  
Save message: allows you to save the  
message so that it can be sent later. You can  
read the message in the Outbox.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
• recipient’s phone number, or name if stored in the  
Phonebook.  
3. When you have finished entering your message,  
choose Send from the options.  
• message status;  
a message to send.  
for a sent message or  
for  
4. Enter a destination number on the Address  
screen.  
To view a message, scroll to it and press the Select  
soft key. The screen shows the:  
You can search for a number in the Phonebook  
by pressing the Phonebook soft key.  
• message status;  
a message to send.  
for a sent message or  
for  
for  
Note: To clear or clear all your input, press or press  
and hold the C key. When you have no input,  
press and hold the C key to move to the  
previous screen.  
• memory where the message was stored;  
the SIM card or  
for the phone’s memory.  
• message contents.  
To send the message to multiple destinations up  
to 5, press the Add soft key and repeat step 4.  
You can scroll to the next or previous message by  
pressing the Left or Right key.  
5. When you have finished entering the numbers,  
To scroll through the message, press the Up or  
Down key.  
press the Ok soft key.  
6. If the Enter centre screen displays, enter the  
You can choose the following options by pressing  
the Options soft key:  
service number and press the Ok soft key.  
You can store the SMS service centre number. For  
details, see page 86.  
Delete: allows you to delete the message.  
Cut number: allows you to send a message to the  
Note: When the phone fails to send the message;  
Press the Retry soft key to try again the  
transmission. Or, press the No soft key and the  
Save soft key to save the message or exit the  
menu by pressing the No soft key.  
number or paste the number into Phonebook.  
Send: allows you to send the message to another  
person.  
Edit: allows you to edit the message.  
Transfer: allows you to transfer the message from  
the SIM card to the phone’s memory or vice versa.  
71  
70  
Messages  
Messages  
messages. This function is available only if it is  
Delete All (Menu 1.1.4)  
supported by your service provider. Only phones  
that offer picture message features can receive and  
display picture messages.  
You can delete all messages stored in the SIM card  
and phone’s memory in this menu.  
1. Scroll to a message box and place a check mark  
Retrieving a new message  
ahead of it by pressing the Select soft key.  
When you are retrieving a message, the Retrieving  
Selecting All places check marks on all of the  
message boxes.  
icon (  
retrieving a new message, the New message icon  
) and a text notification showing the number of  
the message appear on the display. You also hear  
an alert, depending on the message sound setting;  
for further details, see page 95.  
) appears on the display. When you finish  
(
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the Ok  
soft key.  
To read the new message in Idle Mode, press the  
View soft key. And then you see the list in the  
Inbox. If you select a message, you can read it.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
box(es).  
Notes:  
• When you set the Message reception (see  
page 87) to Automatic, you cannot enter the  
Downloads menu (Menu 7.3.1) and cannot also  
access WAP sites while retrieving a new message. If  
you message comes in your phone while you play a  
Java game, your phone only receive a notification  
message. After playing the game, you can retrieve  
the message with saved notification message.  
To clear the new message notification on the display,  
Otherwise, press the No soft key.  
Multimedia Message (Menu 1.2)  
Multimedia Message Service (MMS) is a messaging  
service very similar to Short Message Service  
(SMS). It provides asynchronous delivery of  
personal multimedia messages from between  
phone and phone, phone and e-mail, phone and  
web(by URL).  
press the  
key. When you also have missed  
calls, voice mails, short messages or multimedia  
messages, and multi CBs, the right soft key  
indication changes in the following order: Missed  
,
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice and sounds. An MMS  
message is a multimedia presentation in a single  
entry. It is not a text file with attachments.  
Connect, View, CB and Phonebook  
.
If Message reception was set to Manual (for  
details, see page 87), when the New message icon  
) appears on the display, you have to retrieve  
messages in the Inbox. You select a message with  
the icon such as and in the Inbox. Then  
(
Using the MMS feature, your phone can receive  
multimedia messages. You can also send picture  
,
73  
72  
Messages  
Messages  
Note: The icon of message status can have  
various forms like as the  
you can select retrieve or delete message by  
pressing the Opt. soft key.  
,
,
priority that sender fixed (see page 87).  
Managing memory  
To view a message, scroll to it and press the Select  
soft key.  
When the memory is full, the New message icon  
(
) blinks and an error message displays. (It  
To scroll through the message contents, press the  
Up or Down key. When the message has more than  
one page, you can press the Left or Right key to  
move through the pages or the pages are moved  
through as predefined page timer, which the sender  
sets, has elapsed.  
disappears when you press the key, but it  
reappears if you don’t delete old messages.) In this  
case, you cannot receive any new messages. You  
must delete one or more old messages to get free  
memory for new messages using the Delete option  
within the Inbox, Outbox, Draft or My folder, or the  
Delete all option; for further details, see page 82.  
Notes:  
• Some types of sound or picture may not be able to  
play or display.  
• When the message has an attachment like video  
Notes:  
• You can only receive up to 150 messages.  
• Multimedia message boxes, Camera, and Media box  
share a given amount of memory in your phone. You  
can also use the Delete or Delete all option to  
delete some sounds or images in Camera or Media  
box.  
clips, the Attachment icon (  
) appears on the title  
line. You may not play the attachment. And you may  
also not extract it from the message.  
You can choose the following options by pressing  
the Opt. soft key:  
Inbox (Menu 1.2.1)  
Delete: deletes the message.  
Your phone receives incoming messages and saves  
them in the Inbox.  
Replay: replays the message.  
Reply: replies to the sender by sending a message.  
Forward: forwards the message to another person.  
Call back: allows you to call the sender back.  
When the Inbox menu is selected, the list of  
messages received displays with the:  
• message’s subject or No subject if the message  
had no subject.  
Cut media: extracts the picture or sound, so that  
you can set them as a wallpaper or ringtone or you  
can send them as a multimedia message.  
• sender’s phone number  
• message status;  
a message to read,  
for a read message,  
for a read notification  
for  
message and  
read.  
for a notification message to  
Cut address: extracts phone numbers, email  
addresses or URL addresses in the text, so that you  
can call the number or send a message to the  
number or save it in your Phonebook.  
75  
74  
Messages  
Messages  
Properties: shows you detailed information about  
the message.  
Item  
How to add  
Picture To add a picture in Media box;  
Move to My folder: moves the message to the My  
folder for later use.  
1. Select one of the pictures  
categories. The picture list of the  
category is displayed.  
New Message (Menu 1.2.2)  
2. Select one of picture you want to  
add. The picture is displayed.  
This menu option allows you to create a new  
multimedia message and then send it to multiple  
destinations.  
3. Press the Add soft key.  
1. Select one of the following items using the Up or  
Sound  
To add a new sound;  
Down key and press the Add soft key.  
1. Select the Record new option.  
Item  
How to add  
2. Press the Record soft key to start  
recording.  
Subject 1. Enter a subject of your message.  
For details about entering  
3. Press the Stop soft key to stop  
characters, see page 39.  
recording.  
2. Press the Ok soft key.  
4. Press the Play soft key to replay the  
sound. Or, press the Add soft key to  
add it. Enter the sound’s name and  
press the Ok soft key. The sound is  
added to the message and saved in  
Media box automatically.  
Note: To return to previous screen while  
entering a subject, press and hold  
the C key.  
Picture To add a new picture;  
1. Select the Create new option.  
To add a sound in Media box;  
2. Take a photo using the camera  
feature. For details about the  
camera feature, see page 148.  
1. Select one of the sound categories.  
The sound list of the category is  
displayed.  
3. Select one of pictures you want to  
add. The picture is displayed.  
2. Select one of the sounds you want  
to add.  
4. Press the Add soft key.  
3. Press the Select soft key to add it.  
77  
76  
Messages  
Messages  
Clear subject/picture/sound/message:  
allows you to delete the subject, image, sound  
or message by selected work.  
Item  
How to add  
Message  
1. Enter a new message. Or you can  
enter a preset message.  
Delete page: allows you to delete the current  
page.  
To enter a preset message;  
Save message: saves the message in Draft  
(Menu 1.2.4) or My folder (Menu 1.2.5).  
• Press the Opt. soft key and select  
the Preset messages.  
• Select one of the preset  
messages.  
Note: To go back to the edit screen, press the  
soft key or the  
C
key.  
2. Press the Opt. soft key and select  
the Done option to add the  
message.  
3. When you finish creating the message, select  
Send from the options.  
4. Select an entry on the Send screen.  
Note: To return to previous screen while  
entering a message, press and  
hold the C key.  
If it is an empty entry, enter a destination as  
below.  
Number: to enter a destination number.  
2. Press the Opt. soft key to use the following  
options.  
E-mail: to enter e-mail address.  
Preview: shows your message as it will  
display on the recipient’s phone. To go back to  
the message screen, press the Edit soft key.  
To send the message, press the Send soft key  
and go to step 4.  
Phonebook: to enter a destination from the  
Phonebook.  
After entering a destination, press the Ok soft  
key.  
If it is not an empty entry, do the following  
things.  
Send: allows you to send the message to  
another person. Refer to the next steps.  
Add page: allows you to add up to 10 pages.  
You can move to each page using the Left or  
Right key on the message screen.  
Edit address: to edit the selected address.  
Delete address: to delete the selected  
address.  
Page timing: allows you to set how long one  
page of the received messages displays. After  
a specified time, the display automatically  
scrolls to the next page.  
Note: To clear or clear all your input, press or press  
and hold the C key. When you have no input,  
press and hold the C key to move to the  
previous screen.  
Text effect: allows you to set the colour, size  
and style of the message text.  
79  
78  
Messages  
Messages  
5. To send the message to multiple destinations up  
to 20, repeat step 4.  
You can choose the following options by pressing  
the Opt. soft key:  
6. When you have finished entering the  
Delete: deletes the message.  
Replay: replays the message.  
Send: send the message.  
destinations, press the Send soft key.  
Press the Cancel soft key not to send the  
message.  
Properties: shows you detailed information about  
the message.  
When the phone fails to send the message, press  
the Retry soft key to try again the transmission.  
Or, press the Cancel soft key to save the message.  
Move to My folder: moves the message to the My  
folder for later use.  
Outbox (Menu 1.2.3)  
Draft (Menu 1.2.4)  
Outbox stores messages that you sent, you failed to  
send and you cancelled sending.  
This message box stores messages that you save,  
interrupted messages by an incoming call or  
message while you create a new message.  
When the Outbox menu option is selected, the list  
of messages you have sent or saved displays with  
the:  
Note: Saves messages that are failed to send in the  
• message’s subject or No subject if the message  
had no subject.  
Outbox.  
To view a message, scroll to it and press the Select  
soft key.  
• recipient’s phone number  
• message status;  
a message that you failed to send or you  
cancelled sending, for a delivery report.  
When a receiver retrieves a message you sent,  
is changed into  
for a sent message,  
for  
You can choose the following options by pressing  
the Opt. soft key:  
Send: replies to the sender by sending a message.  
Replay: replays the message.  
.
To view a message, scroll to it and press the Select  
soft key.  
Delete: deletes the message.  
Properties: shows you detailed information about  
the message.  
To scroll through the message, press the Up or  
Down key. When the message has more than one  
page, you can press the Left or Right key to move  
through the pages or the pages are moved through  
as paging timing that sender fixed automatically.  
81  
80  
Messages  
Messages  
2. If necessary, repeat step 1 to check another  
My Folder (Menu 1.2.5)  
box.  
You can move the messages stored in the Inbox or  
Outbox to the My folder by using the Move to My  
folder option. While making a new message, you  
can alos save to My folder by using the Save  
message option.  
3. When you have finished checking, press the Ok  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the messages in the  
box(es).  
To view a message, scroll to it and press the Select  
soft key.  
Otherwise, press the No soft key.  
You can choose the following options by pressing  
the Opt. soft key:  
Delete: deletes the message.  
Replay: replays the message.  
Send: send the message.  
Voice Mail (Menu 1.3)  
When you receive a voice mail, your phone displays  
the  
icon and you hear an alert.  
Cut media: extracts the picture or sound, so that  
you can set them as a wallpaper or ringtone or you  
can send them as a multimedia message.  
Connect To Voice Mail (Menu 1.3.1)  
• In Idle Mode, when you receive a new voice mail,  
press the Connect soft key to access your voice  
mail server and follow the instructions provided.  
Cut address: extracts phone numbers, email  
addresses or URL addresses in the text, so that you  
can call the number or send a message to the  
number or save it in your Phonebook.  
• In Idle Mode, hold the 1 key down to access your  
voice mail server and follow the instructions  
provided.  
Properties: shows you detailed information about  
the message.  
• Call your voice mail server number by accessing  
the Connect to voice mail menu (Menu 1.3.1)  
and follow the instructions provided.  
Delete All (Menu 1.2.6)  
This menu option allows you to delete all of the  
messages in each message box. You can also delete  
all of your messages at one time.  
Voice Server Number (Menu 1.3.2)  
Before using the voice mail service, you must store  
the voice mail server number obtained from your  
service provider.  
1. Scroll to a message box and place a check mark  
ahead of it by pressing the Select soft key.  
Selecting All places check marks on all of the  
message boxes.  
83  
82  
Messages  
Messages  
When you select an entry, following options are  
available.  
• the phone is in Idle Mode.  
• the Receive option (Menu 1.5.2) is set to On.  
Edit number: enter a voice mail server number or  
press the Phonebook soft key to enter a number  
from phonebook. And then press the Ok soft key.  
• the message channel is currently active on the  
channel list.  
When you get broadcast messages, you can see the  
messages in Idle Mode. If it is short you can see the  
display, otherwise, press the CB soft key to read  
the message.  
Change name: enter a server name and press the  
Ok soft key to save it.  
Delete: when the confirming message appears,  
press the Yes soft key. To cancel, press the No soft  
key.  
In the Broadcast menu option, the following  
options are available:  
Read: lets you read the received broadcast  
messages.  
Preset Messages (Menu 1.4)  
Archive: shows the list of the messages you saved  
from the temporary list.  
Using this menu, you can preset up to nine  
messages that you use most frequently. When you  
access this menu, the preset message list displays.  
Temporary: shows the latest messages. These  
messages will be gone when the phone is switched  
off.  
1. Scroll to a message or an empty entry by  
pressing the Up or Down key.  
If the message is long, press the UP or Down key.  
When you read a message, press the Options soft  
key to access following options:  
2. Press the Select soft key and enter a new  
message or change the old message.  
Cut number: shows the list of numbers included in  
the message.  
For further details about entering characters,  
see page 39.  
Save: (Temporary only) saves this message to  
Archive list.  
3. Press the Ok soft key to save the message.  
Delete: delete this message.  
Delete All: delete all message on the list.  
Broadcast (Menu 1.5)  
Receive: allows you to turn the reception of  
broadcast messages on or off.  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Messages are displayed immediately as they  
are received, provided that:  
85  
84  
Messages  
Messages  
Channel: the check mark inside All check box  
indicates that the channel is enabled.  
Delivery report: allows you to set on or off. When  
this function is set to on, the network informs you  
whether or not your message has been delivered.  
To enable or disable this channel press the Select  
soft key, then select Enable or Disable.  
Multimedia Message (Menu 1.6.2)  
The Add channel option allows you to add a new  
channel to the channel list. Enter the appropriate  
channel code obtained from your service provider  
and a title for the channel.  
Using this menu, you can set up default settings for  
sending or receiving MMS message. The following  
options are available:  
Send settings: The following options are available:  
Language: selects a language you prefer. Then, You  
can get cell broadcast messages only in the language  
you selected.  
Priority: allows you to set the priority of message.  
Validity period: allows you to set the length of time  
your messages are stored at the message centre  
while attempts are made to deliver them.  
Settings (Menu 1.6)  
Delivery after: you can set the delay time before  
the phone sends your messages.  
Short Message (Menu 1.6.1)  
Leave a copy: allows you to copy the message that  
you sent.  
Using this menu, you can set up default SMS  
information. The following options are available:  
Address hiding: when this option sets to On, your  
phone number does not display on the recipients  
phone.  
Service centre: allows you to store or change the  
number of your SMS centre required when sending  
messages. You must obtain this number from your  
service provider.  
Delivery report: when this option sets to On, the  
network informs you whether or not your message  
has been delivered.  
Validity period: allows you to set the length of time  
your messages are stored at the message centre  
while attempts are made to deliver them.  
Read reply: when this option sets to On, your  
recipient’s phone sends a reply to let you know  
when your message was read by her/him.  
Message type: allows you to set the message type  
to Text, Fax, Voice, ERMES, X400, or E-Mail. The  
network can convert the messages into the selected  
format.  
Receive settings: the following options are  
available:  
Message reception: allows you to set how you  
receive a message. You can select one of Manual,  
Automatic and Reject.  
Reply path: allows the recipient of your SMS  
message to send you a reply via your message  
centre, if the service is provided by the network.  
87  
86  
Messages  
Messages  
Anonymous reject: when this option sets to On,  
your phone rejects messages without a caller ID.  
the address of the GPRS network gateway.  
- Login ID: enter the user ID required to  
Adverts reject: when this option sets to On, you  
connect  
can reject advertisements by service provider.  
to GPRS network.  
Report allowed: when this option sets to Off, your  
phone does not send a reply to the recipient’s  
phone even if the sender asks for the read reply.  
- Password: enter the password required to  
connect to the GPRS network.  
• Bearer: select the bearer to be used for each type  
of network accesses.  
MMS profiles: in this menu, you can configure  
MMS profile settings that are required when you  
send or receive multimedia messages.  
- GPRS only: it only work in GPRS network.  
- GSM only: it only works in GSM network.  
Current profile: allows you to select one profile to  
use currently.  
Profile setting: allows you to set up to five profiles.  
• Profile name: enter the name of the profile.  
• Server URL: enter the address of profile server.  
Memory Status (Menu 1.7)  
You can check the memory status for messages.  
• GSM setting: allows you to change the proxy  
settings for the GSM network.  
Short Message (Menu 1.7.1)  
- Gateway: enter the IP address and IP port.  
- Data call type: select a network connection  
type between ISDN and Analogue.  
- Dial number: enter the server phone  
number.  
You can check how many messages are stored in  
SIM card and phone’s memory.  
When you have finished, press the  
the key to exit.  
soft key or  
Multimedia Message (Menu 1.7.2)  
- Login ID: enter the server login ID.  
- Password: enter the server password.  
Multimedia message boxes, Camera and Media box  
share a given amount of memory in your phone.  
The display shows the status of free and used  
memory.  
• GPRS setting: allows you to change the proxy  
settings for the GPRS network.  
You can see the used memory status of multimedia  
message boxes, Camera and Media box by pressing  
the Left or Right key.  
- Gateway: enter the IP address and IP port.  
- APN: enter the access point name used for  
89  
88  
Call Records  
Call Records  
• delete all of the calls.  
Via this menu, you can view the:  
• calls you missed, received or dialled.  
• cost of your calls.  
• paste the number into Phonebook.  
Dialled Calls (Menu 2.3)  
• length of your calls.  
Note: You can access the numbers in the three types  
This option lets you view the last 20 dialled  
numbers.  
of call records by pressing the  
Mode.  
key in Idle  
The number, or name if available, displays together  
with the date and time when the call was made.  
Missed Calls (Menu 2.1)  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all the calls.  
This option lets you view the last 20 unanswered  
calls if the caller line identification is available.  
• paste the number in the Phonebook.  
The number, or name if available, displays together  
with the date and time when the call was missed.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
• delete all of the calls.  
Delete All (Menu 2.4)  
You can delete all of the numbers stored in each call  
record.  
• paste the number into Phonebook.  
When a confirming messages appears, press the  
Yes soft key to confirm.  
Received Calls (Menu 2.2)  
Otherwise, press the No soft key.  
This option lets you view the last 20 received calls if  
the caller line identification is available.  
The number, or name if available, displays together  
with the date and time when the call was received.  
By pressing the Options soft key, you can also:  
• delete the current call record from the list.  
90  
91  
Call Records  
Call Records  
The following options are available:  
Call Time (Menu 2.5)  
Last call cost: cost of the last call made.  
This option lets you view the timers for calls made  
and received.  
Total cost: total cost of all calls made since the  
cost counter was last reset. If the total cost exceeds  
the maximum cost set via the Set max cost  
option, you can no longer make any calls until you  
reset the counter.  
Notes:  
• If your SIM card supports the ALS (Alternate Line  
Service) feature, you must first select the  
appropriate line.  
• The actual time invoiced for calls by your service  
provider may vary, depending on network features,  
rounding-off for billing purposes and others.  
Max cost: maximum cost set via the Set max cost  
option.  
Reset counters: option used to reset the cost  
counter; you must first enter your PIN2 (see  
page 162) and then press the Ok soft key.  
The following timers are available:  
Last call time: the length of the last call.  
Set max cost: option used to enter the maximum  
cost that you authorise for your calls; you must first  
enter your PIN2 (see page 162) and then press the  
Ok soft key.  
Total sent: the total length of all calls made since  
the timer was last reset.  
Total received: the total length of all calls  
Price/Unit: option used to set the cost of one unit;  
this price per unit is applied when calculating the  
cost of your calls; you must first enter your PIN2  
(see page 162) and then press the Ok soft key.  
received since the timer was last reset.  
Reset timers: the option used to reset the call  
timers. You need to enter the phone password and  
then press the Ok soft key.  
Call Costs (Menu 2.6)  
This feature lets you view the cost of calls.  
Notes:  
• This feature is not intended to be used for billing  
purposes.  
• AOC (Advice Of Charge) information may display in  
Idle Mode, depending on your SIM card or service  
provider.  
93  
92  
Sound Settings  
Sound Settings  
Melody: the phone rings using the melody selected  
via the Melody option. See above.  
You can use the Sound settings feature to  
customise various settings, such as the:  
Vibration: the phone vibrates but does not ring.  
• ringtone, volume and type for incoming calls or  
messages.  
Vibration then melody: the phone first vibrates and  
then starts ringing.  
• sounds made when your call is connected or  
when you press a key.  
• quiet mode which your phone switches to when  
Messages (Menu 3.2)  
you hold down the  
key.  
This option allows you to set up the ringer for each  
incoming short message and multimedia message  
received.  
Incoming Calls (Menu 3.1)  
This option allows you to set up the ringer for  
incoming calls.  
Short Message (Menu 3.2.1)  
Multimedia Message (Menu 3.2.2)  
/
Note: If your SIM card supports the ALS (Alternate  
Line Service) feature, you must select the line  
you wish to change first.  
The following options are available:  
Tone: lets you choose from many different tones.  
Each time you select a tone from the list, the tone is  
played.  
The following options are available:  
Each time you select a melody from the list, it plays  
the melody.  
Alert type: lets you specify how you are informed  
of any incoming messages.  
Default melodies: allows you to select one of the  
predefined melodies.  
Silent: only the text notification appears; the phone  
neither rings nor vibrates.  
My sounds: allows you to select one of the sounds  
received from other sources, such as the WAP sites,  
the EasyStudio PC software or multimedia  
messages.  
Tone: the phone rings using the tone selected via  
the Tone option. See above.  
Vibration: the phone vibrates but does not ring.  
Vibration then tone: the phone first vibrates and  
then starts ringing.  
Ring volume: allows you to adjust the ring  
volume. Use the Up and Down keys or the volume  
keys on the left side of the phone. The more bars  
you see, the louder the volume.  
Repetition: allows you to specify how often the  
phone informs you of a new message. You can  
choose either Once or Periodic.  
Alert type: lets you specify how you are informed  
of any incoming calls.  
94  
95  
Sound Settings  
Sound Settings  
To adjust the key tone volume, press the volume  
keys on the left side of the phone in Idle Mode with  
the folder open.  
Power On/Off (Menu 3.3)  
This option allows you to select the melody that the  
phone sounds when you switch it on or off.  
You can choose either Basic or Cheerful. To turn  
the sound off, select Off.  
Minute Minder (Menu 3.6)  
This menu option allows you to specify whether or  
not the phone beeps every minute during a call to  
keep you informed of the length of your call.  
Connection Tone (Menu 3.4)  
The following options are available:  
Off: the phone does not beep.  
This menu option allows you to specify whether or  
not the phone beeps when the phone connects to  
the network.  
On: the phone beeps every minute.  
The following options are available:  
Off: the phone does not beep.  
Quiet Mode (Menu 3.7)  
On: the phone beeps when your call is accepted.  
When you hold the  
key down in Idle Mode, the  
phone switches to the Quiet Mode. You can specify  
whether the phone vibrates or mutes when in the  
Quiet Mode.  
Key Tone (Menu 3.5)  
This menu option allows you to select the tone that  
the keypad sounds when you press a dial key.  
The following options are available:  
Vibration: the phone vibrates rather than rings in  
the Quiet Mode.  
The following options are available:  
Off: the keys do not make any sound.  
Mute: the phone mutes sound settings in the Quiet  
Mode.  
Tone: each key, when pressed, makes a different  
sound.  
Beep: each key, when pressed, makes the same  
sound.  
Piano / Drum: each key, when pressed, makes a  
different sound like playing the piano or the drum.  
97  
96  
Phone Settings  
Phone Settings  
Many different features of your phone can be  
customised to suit your preferences via the  
Phone settings menu.  
Display (Menu 4.2)  
You can change the background image and the  
colour of the components on the display according  
to your preference and needs.  
Wallpaper (Menu 4.2.1)  
Greeting Message (Menu 4.1)  
This option allows you to change the background  
image to be displayed in Idle Mode.  
This menu option allows you to set a greeting  
message to be displayed briefly when the phone is  
switched on.  
The following options are available:  
Animations: allows you to select one of the  
animations.  
When you access this menu, the current message  
displays.  
Photos: allows you to select one of the photos  
taken by the camera.  
To  
Press the  
Images: allows you to select one of the images in  
the Images in the Media box menu that are  
downloaded from the WAP sites, the EasyStudio PC  
software or multimedia messages.  
clear the existing  
message  
C key and hold it down.  
enter a new  
message  
appropriate alphanumeric  
keys.  
Text position: allows you to select the position of  
the text displayed on the idle screen, such as the  
operator’s name, current date and time, and text  
notifications of missed calls or new messages.  
Choose either Top or Bottom. If you set this option  
to Off, your phone displays only the wallpaper  
image.  
save your input  
Ok soft key.  
cancel your input  
and return to Idle  
Mode  
key.  
For further information on how to enter text, see  
page 39.  
Text style: allows you to set the style of the text  
displayed on the idle screen.  
Note: When you set the wallpaper image to  
Calendar, the Text position and Text style  
options don’t work.  
98  
99  
Phone Settings  
Phone Settings  
Note: If you select the Right to left or Left to right  
option, the Speed screen appears. You can set  
the sliding speed by pressing the Select soft  
key in the Speed screen.  
Skin (Menu 4.2.2)  
You can change the colour setting of the display  
components, such as soft key indications area or  
the menu names and icons.  
Light time: allows you to set how long turn on the  
light.  
Backlight (Menu 4.2.3)  
Service light: allows you to set the type of service  
light icon. And you can turn the Service light off.  
You can specify how long the phone uses the  
backlight.  
Select how long the backlight remains on after the  
last key is pressed or the folder is open.  
Language (Menu 4.3)  
You can select a different language for the display  
text and text input modes. The following options  
are available:  
LCD Brightness (Menu 4.2.4)  
This option allows you to adjust the brightness of  
the display screens to make them lighter or darker.  
Text language: allows you to change the language  
of the display text, such as menus, options or  
warning messages.  
1. Adjust the brightness by using the Up and Down  
keys or the volume keys on the left side of the  
phone.  
Input mode: allows you to set the default  
language to be used in the text input mode.  
2. When you are satisfied, press the Ok soft key to  
save the selection.  
Front LCD (Menu 4.2.5)  
You can select a different clock displaying type on  
the Front LCD. The following options are available;  
Clock sliding: allows you to change the displaying  
type of the digital clock.  
Right to left: The front LCD slides from right to left.  
Left to right: The front LCD slides from left to right.  
No sliding: The front LCD doesn’t slide.  
101  
100  
Phone Settings  
Phone Settings  
Phone Lock (Menu 4.4.3)  
Security (Menu 4.4)  
When the Phone lock feature is enabled, the phone  
is locked and you must enter the 8-digit phone  
password each time the phone is switched on.  
The security settings enable you to restrict the use  
of your phone to the people and types of calls of  
your choice.  
The password is preset to “00000000” at the  
factory. To change the phone password, see the  
Change password menu option on the page 103.  
Various codes and passwords are used to protect  
the features of your phone. For more information,  
see page 161 -163.  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
PIN Check (Menu 4.4.1)  
The following options are available:  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
Enable: you are required to enter the phone  
password when you switch the phone on.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
Change Password (Menu 4.4.4)  
The following options are available:  
Disable: the phone connects directly to the  
network when you switch it on.  
The Change password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
Enable: you must enter the PIN each time the  
phone is switched on.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
To change your PIN, see the Change PIN menu  
option (page 102).  
Change PIN (Menu 4.4.2)  
Privacy (Menu 4.4.5)  
This feature allows you to change your current PIN  
to a new one, provided that the PIN Check feature  
is enabled. You must enter the current PIN before  
you can specify a new one.  
This feature allows you to lock or unlock the usage  
of the contents, such as multimedia messages,  
photos, images and sounds.  
To enable or disable the Privacy feature, you must  
enter your phone password.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
103  
102  
Phone Settings  
Phone Settings  
Note: Not all SIM cards have a PIN2. If your SIM card  
SIM Lock (Menu 4.4.6)  
does not, this menu option is not displayed.  
To enable the SIM lock feature, you must enter a  
new four- to eight-digit SIM lock code, and confirm  
it by entering it again.  
Auto Redial (Menu 4.5)  
The following options are available:  
With the Auto Redial function, the phone makes up  
to ten attempts to redial a phone number after an  
unsuccessful call.  
Disable: you can use any other SIM cards with  
your phone.  
Enable: you must enter the SIM lock code to use  
another SIM card with your phone.  
Note: The interval between two call attempts varies.  
To unlock the SIM, enter the SIM lock code.  
The following options are available:  
Off: the number is not redialled.  
FDN Mode (Menu 4.4.7)  
On: the number is redialled automatically.  
The FDN (Fixed Dial Number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
Side Key (Menu 4.6)  
The following options are available:  
This menu option allows you to change the function  
of the volume keys on the left side of the phone  
when you receive an incoming call.  
Disable: you can phone any number.  
Enable: you can only call phone numbers stored in  
the Phonebook. You must enter your PIN2.  
The following options are available:  
Note: Not all SIM cards have a PIN2. If your SIM card  
Reject: the incoming call is rejected when you hold  
down one of the volume keys.  
does not, this menu option is not displayed.  
To change your PIN2, see the Change PIN2 menu  
option on the page 104.  
Silence: the ring tone is silenced when you hold  
down one of the volume keys; the call is not  
rejected.  
Change PIN2 (Menu 4.4.8)  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
105  
104  
Phone Settings  
Phone Settings  
If there is no communication between your phone  
and the IrDA-compliant device within 1 minute of  
activating the feature, it is automatically  
deactivated.  
Fax Mode (Menu 4.7)  
You can use your phone as a modem for faxing  
when it is connected to computing devices. You  
need to purchase a data kit from your local  
Samsung dealer.  
Reset Settings (Menu 4.9)  
In this menu, you can enable the fax mode on your  
phone.  
This menu option allows you to reset your phone to  
its default configuration. You can reset the sound  
settings, phone settings or all of the settings  
together.  
The following options are available:  
Off: you can send or receive data calls.  
On: you can send or receive fax calls.  
In any case you can send or receive voice calls.  
1. Select one of the settings to reset by pressing  
the Select soft key.  
After connecting the phone to your computing  
device using the data cable and set this menu to  
On. Your phone works as a fax modem.  
2. When a confirming message appears, press the  
Yes soft key to reset settings. Then enter the  
phone password and press the Ok soft key.  
For further details about setting and faxing through  
the phone on your computer, see the computers  
user’s manual.  
The password is preset to “00000000” by  
default. To change it, see page 103.  
Otherwise, press the No soft key.  
Infrared Activation (Menu 4.8)  
In this menu, you can activate or deactivate the  
infrared port.  
The following options are available:  
Off: deactivates infrared feature on the phone.  
On: activates the infrared feature on the phone.  
The IrDA icon (  
display.  
) appears on the top line of the  
107  
106  
Organiser  
Organiser  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays or other special days.  
The Organiser feature enables you to:  
• view the calendar and/or write a memo or to do  
list.  
Note: You can save up to 25 items to each  
category, so you can save 100 memos  
totally.  
• set the current date and time, and find out what  
time it is in various cities around the world.  
• set the alarm so that the phone rings at a specific  
time.  
3. Scroll to a date on the calendar by pressing the  
navigation keys. Press the Select soft key.  
• use your phone as a calculator, unit convertor,  
timer or stopwatch.  
4. If applicable depending on the category you  
selected, enter the event time and press the Ok  
soft key.  
5. If you have selected the 12-hour time format  
(see page 115), select AM or PM by pressing  
the Up or Down key and then press the Select  
soft key.  
New Memo (Menu 5.1)  
This menu option allows you to create a new memo.  
Note: You can also access this menu by holding down  
6. To set an alarm for the memo, press the Yes  
the  
C
key in Idle Mode.  
soft key.  
1. Write your memo of up to 100 characters and  
Otherwise, press the No soft key. The memo is  
saved immediately. Go to step 10.  
press the Ok soft key.  
For further information about how to enter text,  
see page 39.  
7. Enter the time for the alarm to sound and press  
the Ok soft key.  
2. Select the category of the memo to be saved  
8. If you have selected the 12-hour time format  
(see page 115), select AM or PM by pressing  
the Up or Down key and then press the Select  
soft key.  
and press the Select soft key.  
The following categories are available:  
Scheduler: general schedule events, such as  
appointments or meetings.  
9. Select an alarm melody and press the Select  
To do list: tasks you need to do. They are  
saved on the to do list.  
soft key.  
The memo is saved and then displays on the  
screen.  
Call: calls you need to make.  
108  
109  
Organiser  
Organiser  
10. You can choose the following option by pressing  
The following options are available when you press  
the Options soft key:  
the Options soft key on the Calendar display:  
Add: allows you to add a new memo on the  
day.  
Add memo: allows you to add a new memo on the  
day.  
Delete: allows you to delete the memo.  
Go to date: allows you to enter a particular date  
Edit: allows you to edit the memo.  
and then schedule an event on that date.  
Move: allows you to move the memo to a  
different date.  
View all: shows all of the events that you have  
scheduled.  
Copy: allows you to copy the memo to a  
different date.  
Delete day: deletes the scheduled event on the  
selected day.  
11. When you have finished, press the  
or the key to exit.  
soft key  
Delete all: deletes all of the events that you have  
scheduled.  
Creating a New Memo  
Calendar (Menu 5.2)  
1. Scroll to a date on the calendar, referring to  
page 110, and press the Select soft key.  
The calendar helps you to keep track of schedule,  
calls that you need to make, tasks that you need to  
do and anniversaries. You can set the alarm to ring  
when the set date for a schedule is reached.  
2. Write your memo and press the Ok soft key.  
For further information about how to enter  
characters, see page 39.  
3. Select the category of the memo to be saved  
Consulting the Calendar  
and press the Select soft key.  
To  
Press the  
The following categories are available:  
move to another  
day  
Left or Right key.  
Scheduler: general schedule events, such as  
appointments or meetings.  
move to another  
week  
Up or Down key.  
To do list: tasks you need to do.  
Call: calls you need to make.  
move to the  
previous or next  
month  
Up or Down key and hold it  
down  
Anniversary: anniversaries to be  
remembered, such as wedding anniversaries,  
birthdays or other special days.  
move to the  
previous or next  
year  
Left or Right key and hold it  
down.  
4. Follow the procedure from step 4 on page 109  
onwards to save the memo.  
110  
111  
Organiser  
Organiser  
Viewing Your Calendar Memos  
To Do List (Menu 5.3)  
A date that has a memo associated with it is  
highlighted in a red box. If you select a date when  
events have already been scheduled, the number of  
memos of each type is shown at the bottom of the  
calendar.  
This menu allows you to view a list of tasks.  
To create a new memo of the To do list type:  
1. Write the memo about your task and press the  
Ok soft key.  
: General schedule events  
: To do list  
For more information about how to enter  
characters, see page 39.  
: Calls  
2. Scroll to a date on the calendar, referring to  
: Anniversaries  
page 110, and press the Select soft key.  
Press the Select soft key to view the memos.  
3. Follow step 4 on page 109 onwards to save the  
memo.  
If you have created more than one memo on the  
same day, you can scroll to the event you want to  
view by pressing the Left or Right key.  
Once you have defined tasks, they are listed with a  
status mark (  
for Done or  
for Undo) within  
The following options are available when you press  
the Options soft key:  
the To do list menu.  
To scroll to a specific task, press the Up or Down  
key and press the Select soft key. The task displays  
with the deadline, alarm setting, job details and  
status mark.  
Add: allows you to add a new memo. For further  
information about how to add a memo, see  
page 108.  
Delete: allows you to delete the memo.  
You can scroll to the previous or next task by  
pressing the Left or Right key.  
Edit: allows you to edit the memo.  
The following options are available when you press  
the Options soft key:  
Move: allows you to move the memo to a different  
date.  
Add: allows you to add a new task. For details  
about adding To do list-type memos, see page 108.  
Copy: allows you to copy the memo to a different  
date.  
Mark: allows you to change the status mark.  
Edit: allows you to edit the contents of the task.  
Move: allows you to move the task to a different  
date.  
112  
113  
Organiser  
Organiser  
Copy: allows you to copy the task to a different  
To select your time zone:  
date.  
1. Select the city corresponding to your time zone  
by pressing the Left or Right key one or more  
times.  
Delete: allows you to delete the task.  
Delete all: allows you to delete all of tasks from  
the list.  
The local date and time display.  
2. Press the Set soft key.  
Clock (Menu 5.4)  
3. To  
Select  
This option allows you to change the current time  
and date displayed. You can also check the current  
time for Greenwich Mean Time (GMT) and 21 major  
cities around the world.  
update the current Set local.  
date/time with this  
new setting  
indicate that the  
time zone is  
Set DST. The  
shown next to the time  
icon is  
The following options are available:  
currently using the difference.  
daylight saving  
time  
Set time: allows you to enter the current time. You  
can choose the time format in the Set format  
menu option; see page 115.  
indicate that the  
time zone is no  
longer using the  
daylight saving  
time  
Remove DST (only  
Note: Before setting the time, you must specify your  
available when the  
icon is shown next to the  
time difference).  
time zone in the Set world time menu option.  
Set date: allows you to enter the day, month and  
year. You can change the date format in the Set  
format menu option; see page 115.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Set world time: allows you to check the current  
time in GMT and 21 major cities around the world.  
Scroll through the cities using the Left or Right key.  
Set format: allows you to change the time and  
date formats.  
Time format: 24 hours  
12 hours  
The screen shows the:  
• city name.  
Date format: DD/MM/YYYY (day/month/year)  
YYYY/MM/DD (year/month/day)  
• current date and time.  
• time difference between the selected city and  
your city if you have set the local time (see  
below) or GMT (by default).  
114  
115  
Organiser  
Organiser  
5. Repeat step 4 to change each setting.  
6. When you have finished, press the  
Alarm (Menu 5.5)  
soft key or  
This option allows you to set an alarm to ring at a  
specific time. You can set up to three alarms or set  
the phone to ring an alarm when it is switched off.  
the  
key to exit.  
Once an alarm has been set, you can see the Alarm  
icon ( ) on the top line of the display. To stop the  
alarm when it rings, open and close the phone or  
press any key.  
To set an alarm:  
1. Select either Morning call, Alarm1 or Alarm2  
by pressing the Up or Down key.  
Note: When the Quiet Mode is activated, the alarm  
tone doesn’t sound. But When you set an  
Morning call, it sounds the alarm tone even if  
the Quiet Mode is activated.  
The  
set. The  
icon means that no alarm is currently  
icon means that an alarm has  
already been set.  
To set the alarm to ring even if your phone is  
switched off:  
2. Press the Select soft key.  
3. Press the Options soft key.  
1. Scroll to Auto power on the Alarm list and  
press the Select soft key.  
4. Scroll to an option by pressing the Up or Down  
key and press the Select soft key. Change the  
setting, as needed.  
2. If necessary, press the Up or Down key to select  
On.  
Alarm day: place or remove a check mark on  
the day(s) of the week by pressing the Select  
soft key. If you want to set a daily alarm,  
select Everyday. If you want to set a  
To turn the Auto Power feature off, select Off.  
3. Press the Select soft key to save the setting.  
temporary alarm, select Once alarm. When  
you press the Ok soft key after selecting, your  
phone asks you to enter the alarm time.  
4. When you have finished, press the  
the key to exit.  
soft key or  
Once you have activated the auto power alarm, a  
check mark appears ahead of Auto power. If the  
phone is switched off at the specified alarm time, it  
automatically switches on and rings the alarm. It  
then automatically switches off again.  
Alarm time: enter the time for the alarm to  
sound.  
Alarm tone: select an alarm melody.  
Remove alarm: deactivates the alarm.  
Note: The alert type of Alarm1 and 2 is affected by  
the alert type of incomming call. Morning call’s  
alert type is always melody.  
116  
117  
Organiser  
Organiser  
Calculator (Menu 5.6)  
Conversion (Menu 5.7)  
You can use the phone as a calculator. The  
calculator performs basic arithmetic functions, such  
as addition, subtraction, multiplication, division and  
remainder computation.  
This menu option allows you to convert from one  
type of unit to another.  
To convert a value:  
1. Scroll to the type of conversion to be performed  
from Currency, Length, Weight, Volume,  
Area and Temperature, and press the Select  
soft key.  
To perform a calculation:  
1. Enter the first number using the number keys.  
Note: To erase any mistakes or clear the display,  
press the  
C
key.  
2. Enter the value to be converted and press the  
Down key to move to the From field.  
2. Press the  
key to enter a decimal point (.) or  
the key to enter the appropriate arithmetic  
You can enter a decimal point (.) using the  
key.  
symbol: + (add), - (subtract),  
(multiply), /  
(divide), % (remainder), ( or ).  
3. Select the original unit by pressing the Left or  
Right key and press the Down key to move to  
the To field.  
3. Enter the second figure.  
4. Repeat steps 2 and 3, if necessary.  
Refer to the table on the following page for the  
units available.  
5. Press the Equal soft key to view the result.  
The result appears in the Answer box.  
4. Select the required unit by pressing the Left or  
Right key.  
Note: The result is rounded to six decimal places.  
5. Press the Ok soft key or the  
key to view the  
6. When you have finished, press the  
the key to exit.  
soft key or  
result.  
The result appears in the Answer box.  
6. When you have finished, press the  
the key to exit.  
soft key or  
118  
119  
Organiser  
Organiser  
Even if you exit the Timer screen, the timer will  
Units Available  
continue running. After the specified time has  
expired, the phone informs you by playing a melody  
and displaying a text notification.  
Type  
Units  
Currency  
EUR  
FRF  
ATS  
PTE  
LUF  
DEM  
ESP  
BEF  
ITL  
NLG  
FIM  
To stop the timer melody when it rings, open and  
close the phone or press any key.  
GRD IEP  
To stop the timer before the end, press the Stop  
soft key on the Timer screen.  
Length  
mm  
km  
cm  
in  
m
ft  
Notes  
:
• The timer uses power from the battery consequently,  
the phone’s operating time is reduced.  
• When the Quiet Mode is activated, there is no sound.  
yard mile  
kg  
Weight  
Volume  
g
ton  
grain oz  
3
pound  
3
cm  
m
l
Stopwatch (Menu 5.9)  
3
3
3
in  
ft  
yd  
gal  
The stopwatch can be used to measure times for  
various sports.  
2
2
Area  
cm  
m
a
2
2
2
in  
ft  
yd  
Example: Running or swimming races  
Up to four stopwatches can be used.  
acre  
°C  
Temperature  
°F  
The precision of the stopwatch is one hundredth of  
a second. The maximum measurement time is 10  
hours.  
Timer (Menu 5.8)  
1. To start the stopwatches, press the Ok soft key.  
Using the Timer feature, you can set the phone to  
sound an alarm after a certain time.  
2. When you wish to stop the first stopwatch, press  
the Ok soft key. Repeat this step for the other  
stopwatches.  
1. Press the Set soft key.  
3. Press the Reset soft key to reset the watches.  
2. Enter the length of time you want to count down  
in hours and minutes and press the Ok soft key.  
4. Press the C or  
key to exit.  
3. Press the Start soft key to start counting down.  
120  
121  
Network Services  
Network Services  
• Voice calls only  
These menu functions are network services.  
Please contact your service provider to check their  
availability and subscribe to them, if you wish.  
• Fax calls only (not available when line 2 is in use)  
• Data calls only (not available when line 2 is in  
use)  
Example: You can:  
• systematically divert fax calls to your  
office fax machine.  
Call Diverting (Menu 6.1)  
• divert voice calls to your colleague if  
you are already using the phone.  
Note: The call divert options may be different  
depending on your SIM card and those not  
supported by your network operator may not  
be shown.  
Setting Call Diverting Options  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
1. Select the type of call diverting by pressing the  
Up or Down key and then press the Select soft  
key.  
Example: You may wish to divert your business  
calls to a colleague while you are on  
holiday.  
2. Select the type of calls to be diverted by  
pressing the Up or Down key and then press the  
Select soft key.  
Call diverting can be set up in the following ways:  
Divert always: all calls are diverted.  
3. Press the Activate soft key to confirm your  
settings.  
Busy: calls are diverted if your phone is engaged  
on another call.  
4. Enter the number to which the calls are to be  
diverted.  
No reply: calls are diverted if you do not answer  
the phone.  
To enter an international code, hold down the 0  
key until the + sign displays.  
Unreachable: calls are diverted if you are not in an  
area covered by your service provider.  
You can also select a number in the Phonebook  
or the voice mail server number, by pressing the  
Options soft key, followed by Phonebook or  
Voice server.  
Cancel all: all call diverting options are  
deactivated.  
You can specify individual call diverting options for  
each of the following call types:  
5. When you are satisfied, press the Ok soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
122  
123  
Network Services  
Network Services  
Cancel all: all call barring options are deactivated;  
calls can be made and received normally.  
Deactivating Specific Call Diverting  
Options  
Change barring password: allows you to change  
barring password.  
1. Select the call diverting option to be  
deactivated.  
You can specify individual call barring options for  
each of the following call types:  
2. Select the type of calls to which this option  
applies.  
• Voice calls only  
3. Press the Remove soft key.  
• Fax calls only (not available when line 2 is in use)  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
• Data calls only (not available when line 2 is in  
use)  
You can also deactivate all call diverting options by  
selecting the Cancel all option.  
Setting Call Barring Options  
1. Select the type of call barring by pressing the Up  
or Down key and then press the Select soft key.  
Call Barring (Menu 6.2)  
2. Select the type of calls to be barred by pressing  
the Up or Down key and then press the Select  
soft key.  
The call barring network service allows you to  
restrict your calls.  
Call barring can be set up in the following ways:  
All outgoing: calls cannot be made.  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter your call barring password supplied by  
International: international calls cannot be made.  
your service provider and press the Ok soft key.  
International except to home: when abroad,  
calls can be made only to numbers within the  
current country and to your home country, that is  
the country where your home network provider is  
located.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
Deactivating Specific Call Barring  
Options  
All incoming: calls cannot be received.  
Incoming while abroad: calls cannot be received  
when you are using your phone outside your home  
service area.  
1. Select the call barring option to be deactivated.  
2. Select the type of calls to which this option  
applies.  
124  
125  
Network Services  
Network Services  
3. Press the Deactivate soft key.  
Call Waiting (Menu 6.3)  
4. Enter your call barring password supplied by  
your service provider.  
This network service informs you when someone is  
trying to reach you during another call.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can specify individual call waiting options for  
each of the following call types:  
• Voice calls only  
You can also deactivate all call barring options by  
selecting the Cancel all option.  
• Fax calls only (not available when line 2 is in use)  
• Data calls only (not available when line 2 is in  
use)  
Changing the Barring Password  
You can set and change the call barring password  
obtained from your service provider.  
Activating the Call Waiting Feature  
1. Select Change barring password from the  
Call barring screen, and press the Select soft  
key.  
1. Select the type of calls to which the call waiting  
option is to be applied by pressing the Up or  
Down key and then press the Select soft key.  
2. Enter the current password and press the Ok  
2. Press the Activate soft key to confirm your  
soft key.  
settings.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
3. Enter a new password and press the Ok soft  
key.  
4. Enter the new password again to confirm it and  
Deactivating Specific Call Waiting  
Options  
press the Ok soft key.  
1. Select the type of call to which the option  
applies.  
2. Press the Deactivate soft key.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can also deactivate all call waiting options by  
selecting the Cancel all option.  
126  
127  
Network Services  
Network Services  
Network Selection (Menu 6.4)  
Caller ID (Menu 6.5)  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
The Network selection feature enables you to  
automatically or manually select the network used  
when roaming outside your home area.  
Note: Some networks do not allow the user to change  
this setting.  
Note: You can select a network other than your home  
network only if it has a valid roaming  
The following options are available:  
agreement with your home network.  
Default: the default setting provided by the  
network is used.  
To indicate to automatically or manually select the  
network when roaming:  
Hide number: your number does not display on  
the other person’s phone.  
1. Press the Up or Down key until the appropriate  
option highlights and press the Select soft key.  
Send number: your number is sent each time you  
make a call.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, the phone scans for the  
available networks. Go to step 2.  
Active Line (Menu 6.6)  
2. Press the Up or Down key until the preferred  
network highlights and press the Select soft  
key.  
Some SIM cards may be used with two subscriber  
numbers. This functions is available only if your SIM  
card supports it.  
You are connected to that network when  
roaming.  
This menu option allows you to select the line to be  
used to make calls. However, calls can be answered  
on both lines, regardless of the selected line.  
128  
129  
Fun Box  
Fun Box  
The Fun box menu contains several fun options:  
Note: To quickly launch the WAP browser from Idle  
Mode, press the key.  
• WWW services  
• Media box  
• JAVA world  
• Games  
To scroll through the screen, use the Up and Down  
keys.  
To exit the browser, press the  
key at any  
time. The phone returns to Idle Mode.  
Navigating the WAP Browser  
WWW Services (Menu 7.1)  
To  
Press the  
Your phone comes equipped with a WAP (Wireless  
Application Protocol) Browser, making it possible for  
you to access the Wireless Web.  
scroll through and Up or Down key until the item  
select browser  
items  
you want highlights, and then  
press the soft key.  
Each time you start the WAP Browser, the phone  
connects to the Wireless Web and the service  
select a numbered corresponding numeric key.  
item  
indicator icon (  
or  
) appears on the display to  
inform you that you are connected to the Wireless  
Web and will be billed accordingly. Rates vary  
according to your service option.  
return to the  
previous page  
(or Back) soft key or C  
key.  
return to the  
key and select the Home  
The WAP Browser ends the network connection  
after a certain period of inactivity and automatically  
reconnects as necessary. For this reason, you may  
find that you are billed for several network  
connections within a single session. This is normal  
and is designed to minimise your bill.  
startup homepage browser option. For details,  
see page 132.  
Entering Text in the WAP Browser  
When you are prompted to enter text, the current  
text input mode appears above the right soft key.  
Home (Menu 7.1.1)  
For further information on how to enter text, see  
page 39.  
When you select this menu option, the phone  
connects to the network and loads the homepage of  
the Wireless Web service provider.  
Once connected, the homepage displays. The  
content depends on the service provider.  
130  
131  
Fun Box  
Fun Box  
Using the WAP Browser Menus  
Using the WAP Browser Options  
There are various menu options available when  
surfing the Wireless Web.  
Several options are available when you are surfing  
the Wireless Web. To access these options, press  
the  
key once connected to the Wireless Web.  
To access the WAP Browser menu:  
Goto URL: allows you to manually enter the URL  
address of the site that you wish to access.  
1. Press the  
key or scroll to the logo on the top  
soft  
left of all WAP pages and then press the  
key.  
Bookmark: allows you to use the Bookmark  
menu option. For details, see page 133.  
A list of options appears.  
Messages: allows you to read or write an SMS  
message. For details, see page 66.  
2. Highlight the required option using the Up or  
Down key.  
Media box: allows you to use your Media box. For  
details, see page 137.  
3. Press the  
soft key to select the option.  
4. If necessary, select the secondary option by  
pressing the Up or Down key and then press the  
soft key.  
Answering a Call During a WAP Connection  
You can receive an incoming call while you are  
navigating the WAP browser.  
Note: The WAP Browser menus may vary,  
depending on your version of the browser.  
Answer the call by pressing the  
key, as you  
normally would. After ending the call, you can  
continue navigating on the WAP page you were  
previously accessing.  
The following WAP Browser menus are available:  
Back: returns to the previous page.  
Home: takes you back at any time to the  
homepage of the Wireless Web service provider.  
Bookmark (Menu 7.1.2)  
Exit: exits the WAP browser.  
This menu option allows you to store the URL  
addresses of up to 10 of your favourite Web sites.  
Reload: reloads the current page.  
Show URL: shows the URL address of the WAP  
page you are currently accessing.  
To store a URL address:  
1. Select an empty location and press the Select  
Advanced: the following options are available:  
soft key.  
Clear cache: clears the information stored in the  
cache the phone’s temporary memory used to store  
the most recently accessed WAP pages.  
2. Enter the address and press the Ok soft key to  
save it.  
About: shows browser information.  
132  
133  
Fun Box  
Fun Box  
3. Enter the name of the bookmark and press the  
For each proxy, the following options are available:  
Ok soft key.  
Proxy name: enter the name of the HTTP proxy  
For further information about how to enter text,  
see page 39.  
server.  
GSM setting: you can change the proxy settings  
Once you have stored an address, the following  
options are available when you select it.  
for the GSM network.  
Gateway: enter the IP Address and IP Port  
Go: allows you to access the site directly.  
Data call type: select a network connection type;  
ISDN or Analogue.  
Edit: allows you to change the name and URL  
address of the bookmark.  
Dial number: enter the PPP server phone number.  
Login ID: enter the PPP server login ID.  
Delete: allows you to delete the bookmark.  
Password: enter the PPP server password.  
Go to URL (Menu 7.1.3)  
GPRS setting: you can change the proxy settings  
This menu option allows you to manually enter the  
URL address of the Web site that you wish to  
access.  
for the GPRS network.  
Gateway: enter the IP Address and IP Port.  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
Enter the URL address and press the Ok soft key.  
For further information about how to enter text, see  
page 39.  
Login ID: enter the user ID required to connect to  
the GPRS network.  
Password: enter the password required to connect  
to the GPRS network.  
Clear Cache (Menu 7.1.4)  
This menu option allows you to clear the  
information stored in the cache, the phone’s  
temporary memory used to store the most recently  
accessed WAP pages.  
Home URL: you can change the address of your  
startup homepage.  
When the default homepage displays, you can  
delete it using the C key and enter your own choice.  
To enter any special characters, / for example, use  
the Symbolic mode; see page 45.  
Proxy Settings (Menu 7.1.5)  
This menu option allows you to set up five proxy  
servers.  
Bearer: you can select the bearer to be used for  
each type of network accesses.  
Note: You do not need to change the browser settings  
in most cases. Change the settings only when  
your network provider asks you to.  
134  
135  
Fun Box  
Fun Box  
GPRS first: your phone will search for the GPRS  
network first. If this service is not available, you  
can set the GSM service temporarily.  
Media box (Menu 7.2)  
This menu option stores various media items from  
other sources, such as the WAP sites, the  
EasyStudio PC software or multimedia messages.  
GPRS only: the phone only works in GPRS  
networks.  
GSM only: the phone only works in GSM networks.  
Photos (Menu 7.2.1)  
This option allows you to view the taken pictures.  
Current proxy (Menu 7.1.6)  
My photos: allow you to view the photos in my  
photos.  
This menu option allows you to activate one of the  
proxies you set up to use the WAP connection.  
My album1 / My album 2: allow you to view the  
photos in the selected album.  
Push messages (Menu 7.1.7)  
When you view a photo, press the Options soft key  
This menu allows you to set to be received and read  
push messages.  
to do the followings.  
Send: allows you to send it via a message.  
Rename: allows you to rename it.  
Delete: allows you to delete it.  
The following options are available:  
Inbox: Your phone receives push messages and  
saves them in the Inbox. And you can read push  
messages in the Inbox.  
Move to album: allows you to move it to one of  
the albums.  
Setting: This option allows you to set the push  
message receiving options.  
Set as wallpaper: allows you to set it as a  
wallpaper.  
Always: always push message comes in.  
Never: the push message never comes in.  
Protection: allows you to protect it from deletion  
or not.  
Optional: Only the push messages whose setting  
matches to the number in this option come in. The  
preset number is SMS service centre. You can also  
edit the number.  
Properties: allows you to view the detail  
information of the photo.  
Images (Menu 7.2.2)  
Delete all: deletes all of the push messages.  
This option allows you to view the images received  
from other sources, such as the WAP sites, the  
EasyStudio PC software or multimedia messages.  
136  
137  
Fun Box  
Fun Box  
When you view an image, press the Options soft  
key to send, rename, delete, set as a wallpaper or  
view the properties.  
2. If necessary, repeat step 1 to check another  
box.  
3. When you have finished checking, press the Ok  
For further details about these options, see the  
options of the Photos menu (Menu 7.2.1).  
soft key.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the photos in the  
box(es).  
Sounds (Menu 7.2.3)  
This option allows you to listen to the recorded  
voices and the melodies received from other  
sources, such as the WAP sites, the EasyStudio PC  
software or multimedia messages.  
Otherwise, press the No soft key.  
Images (Menu 7.2.4.2)  
When a confirming message appears, press the Yes  
soft key to delete all of the images.  
Voices: allow you to listen to the recorded voices.  
Otherwise, press the No soft key.  
My sounds: allow you to listen to various melodies.  
Sounds (Menu 7.2.4.3)  
When you select a sound, press the Options soft  
key to send, rename, delete, set as a ringtone (only  
in My sounds) or view the properties.  
1. Scroll to a sound box and place a check mark  
ahead it by pressing the Select soft key.  
For further details about these options, see the  
options of the Photos menu (Menu 7.2.1).  
Selecting All places check marks on all of the  
boxes.  
2. If necessary, repeat step 1 to check another  
box.  
Delete All (Menu 7.2.4)  
This option deletes all of the photos, images and  
sounds in the Media box.  
3. When you have finished checking, press the Ok  
soft key.  
Photos (Menu 7.2.4.1)  
4. When a confirming message appears, press the  
Yes soft key to delete all of the sounds in the  
box(es).  
1. Scroll to a box and place a check mark ahead it  
by pressing the Select soft key.  
Selecting All places check marks on all of the  
boxes. If you want to delete the protected  
photos, select the With protected photos  
option.  
Otherwise, press the No soft key  
138  
139  
Fun Box  
Fun Box  
Memory Status (Menu 7.2.5)  
SnowBallFight  
The goal of this game is to challenge and defeat the  
snowball fight champions of four different teams.  
Media box, Camera and multimedia message boxes  
share a given amount of memory in your phone.  
Accessing a game  
The display shows the status of free and used  
memory.  
After loading the game, press any key twice to go  
to the first menu screen. At the first menu screen,  
You can see the used memory status of Media box,  
Camera and multimedia message boxes by pressing  
the Left or Right key.  
press  
key to play a game, or press  
key to  
access the main menu of this game.  
Play: allows you to start a new game or a saved  
game. Saved game allows you to continue the  
beginning of last stage you played.  
JAVA World (Menu 7.3)  
Instructions: shows you the explanation of control  
keys, offense items and defense items.  
You can download MIDlets (Java applications  
running on mobile phones) from various sources  
using the WAP Browser and store them in your  
phone.  
Configuration: allows you to turn the sound,  
vibration on or off and select the game speed from  
1 to 5.  
Downloads: A list of Java games is displayed. In  
basic, two pre-loaded MIDlets (Java games) are  
provided. If the list of Java games is empty, a pop  
up message is displayed to invite to download a  
new game. To add MIDlets to the list, you can  
download MIDlets from the WAP sites.  
Quit: quits the game and returns to the downloads  
menu screen.  
Playing a game  
Move the character along the street using the  
navigation key. If you have enough gold coins which  
you can earn while fighting to buy items, you can  
buy defense items at the drug store and offense  
items at the item shop. Move the character to the  
To  
Press the  
find a game  
run a game  
Up or Down key.  
Launch soft key.  
Info soft key.  
team of current stage and press  
key to select it.  
When the snowball fight game starts, hit the rival  
kids with snowballs and avoid theirs. While fighting  
you can use items you have. If you raise enough  
mana, you can also use special attack. You should  
win all fights in four stages in order to challenge the  
champions of the snowball fight.  
view detail  
information  
delete the game  
Delete soft key in the  
information display.  
140  
141  
Fun Box  
Fun Box  
Key Commands  
Continue: allows you to continue the last game  
you played. The menu is only available when a  
game has already been played.  
4/6 or Left/Right: move left or right  
2, 5 or Up, :control the distance at the first press  
and throw the snowball at the next press.  
High score: shows you the high score table.  
How to play: shows you the instruction of this  
game.  
8 or Down: use the special attack depending on  
your mana  
Option: allows you to set the sound on or off  
3: enters item mode to use your item, select the  
item you want to use by pressing 2, 5, Up or  
key.  
Playing a game  
Special attacks  
Your score goes up when you remove the bubbles.  
Only when more than 3 same coloured bubbles line  
up horizontally or diagonally, they disappear. To line  
up the bubbles, move the band rounding three  
bubbles to suitable place and rotate it. When the  
game is over, your score is ranked on the high score  
board if it is within third.  
Level 1: Aurora, all enemies are hit by a snowball.  
Level 2: Ice dragon, all enemies are hit by a  
snowball and frozen for 8 seconds.  
Level 3: Icicle storm, double powered snowball  
attack to all enemies and decreasing enemies’  
attack accuracy for 10 seconds.  
Key Commands  
2, 4, 6, 8, or navigation key: move the band up,  
down, left or right  
BubbleSmile  
BubbleSmile is a arcade puzzle game.  
Accessing a game  
1: rotate the bubbles in the band counterclockwise  
3: rotate the bubbles in the band clockwise  
After loading the game, you will see the following  
DNS setting: The DNS (Domain Name Server)  
address to connect the Java server is automatically  
set when making data call set up. The address is  
provided by the network operator automatically, but  
you can change it manually at this menu.  
options, press  
key to select one of them:  
Start game: allows you to start a new game with  
timed mode or skilled mode.  
• Timed mode: you have to achieve the best score  
before gauge disappear at the time bar. When  
you get the same coloured bubble together,  
gauge at the time bar increases.  
Memory status: You can check the free space for  
Java download.  
The display also shows the total memory and used  
memory.  
• Skilled mode: you have to make more than 4  
bubbles disappear at once for the gauge at the  
skill bar increase. If 3 or none of bubbles  
disappear, then the gauge decreases.  
142  
143  
Fun Box  
Fun Box  
Games (Menu 7.4)  
Honey ball (Menu 7.4.1)  
The goal of the game is to break honey blocks by  
bouncing a ball between a bat and the honey  
blocks.  
Using this menu option, you can also enjoy playing  
three games.  
Scroll to the required game by pressing the Up or  
When you start a new game, the ball is sitting on  
the bat in the middle of the screen. Once you start  
the ball moving, you must position the bat, so that  
the ball continues to bounce off it. Each time the  
ball hits a honey block, the block breaks,  
sometimes revealing letters that enhance the  
efficiency of the bat or ball:  
Down key and press the Select soft key.  
To select an option, press the corresponding  
number key. The following options are available:  
New Game: allows you to start a new game.  
High Score: shows you the High Score table. Not  
all games have this option.  
B: the bat and ball change back to their standard  
form.  
Key Info: shows you which keys do what within  
the game.  
C: the ball sticks to the bat each time it hits it,  
giving you time to optimise your position.  
Continue: allows you to continue the last game  
you played. The menu is only available when a  
game has already been played.  
H: the bat increases in length.  
P: the ball is changed into a power ball, so that it  
no longer bounces off the blocks. It goes straight  
through them, destroying anything that it touches.  
While you are playing a game:  
To  
Press the  
If you reach the final stage of the game, the rules  
are slightly different. The honey blocks are much  
stronger and need to be hit more than once before  
they are destroyed. At the same time, small bees  
attack the bat, damaging it a little each time until it  
is destroyed and you lose a life.  
adjust the game  
volume  
volume keys.  
pause/resume the C key.  
game  
exit the game  
key or right soft key.  
Key Commands  
3: slope up.  
At the end of the game, if your score is ranked fifth  
or higher, you may enter a name of up to 10  
characters.  
1: slope down.  
4, Left: move left  
6, Right: move right  
9, 5 or  
: hit the ball  
: turn the sound on or off  
144  
145  
Fun Box  
Fun Box  
Go! Hamster (Menu 7.4.2)  
Bowling (Menu 7.4.3)  
Go! Hamster is an arcade board game. It requires  
patience and discretion. The aim is to remove about  
80% of the background while avoiding the  
mushroom bombs in order to progress to the next  
stage.  
The goal of the game is to knock down a triangular  
group of ten pins by rolling a ball.  
When you start a new game, you can select the  
required mode, character and ball by pressing the  
right soft key.  
When the start screen appears, press any key to  
start the game.  
When the game starts, the screen shows the  
character and ball. Move the character first, then  
select the spin and direction, and finally set the  
power of the ball.  
Key Commands  
2, Up: move up  
Key Commands  
4, Left: move left  
6, Right: move right  
4, Left: move left  
6, Right: move right  
8, Down: move down  
5: stop  
5,  
: set the speed or spin or throw the ball  
: turn the sound on or off  
: turn the sound on or off  
146  
147  
Camera  
Camera  
3. Press the Capture soft key or the Camera (  
)
key on the right side of the phone to take a  
picture.  
Using the camera module embedded in your phone,  
you can take pictures for people or events while on  
the move. Additionally, you can send photos to  
other people in a picture message or as an e-mail  
attachment. The camera produces JPEG pictures.  
The picture is automatically saved in the My  
photos menu (Menu 8.2).  
4.  
To  
Press the  
use the options  
Options soft key.  
For details about the  
options, see below.  
Take Photos (Menu 8.1)  
This menu allows you to take a picture to send the  
photo as a picture message to other destinations.  
You can use the picture as a background and store  
it separately in My album folder.  
delete the picture file  
Delete soft key.  
return to the capture  
mode to take another  
picture.  
C key.  
Taking a Picture with the Folder Open  
turn the camera off  
and return to Idle Mode  
key.  
1. To access this menu, press the Select soft key  
when Take photos highlights. Or, press the  
Down key in Idle Mode.  
When you press the Options soft key in step 4, the  
following options are available. Scroll the option you  
want by pressing the Up and Down keys and press  
the Select soft key:  
To take pictures immediately in Idle Mode, long  
press the Camera ( ) key on the right side of  
the phone or long press the Down key.  
Send: allows you to send a multimedia message  
using the taken picture. For further details about  
sending multimedia messages, see page 76.  
The image to be captured appears on the  
display.  
The icons on the top line of the display indicate  
the current mode, brightness, size and quality.  
Rename: allows you to rename the taken picture.  
Go to my photos: allows you to see the taken  
pictures in the My photos (Menu 8.2).  
2. Adjust the image by aiming the camera to the  
subject.  
Set as wallpaper: allows you to use the image as  
the background image.  
Use the Left and Right keys to adjust the  
brightness of the picture.  
The Up, Down and volume keys zoom in and out  
the image.  
You can set the camera options. See page 150.  
148  
149  
Camera  
Camera  
frame format you want to use. You can preview the  
image with the frame format by using the Preview  
soft key. The picture size set to Mobile(128*120)  
automatically, and Frame mode is not allowed in  
Self shot.  
Protection: allows you to protect the taken picture  
from deletion or not.  
Properties: this option shows you information  
about the picture, such as name, size, date,  
resolution, protection type and format.  
Effects: this options allows you to apply special  
effects to the picture. Press the Up or Down key to  
find the tone you want to use. Gray, Negative,  
Sepia, Emboss, Sketch are available. To  
deactivate the effect setting, select Off.  
Using the Camera options  
When you press the Options soft key in the  
capture mode, the following options are available  
for the current shot:  
Rotation: this option allows you to flip the image  
Mode: You can take a picture in various modes.  
Once you change the mode, its indicator appears at  
the top left on the display.  
vertically or reverse it as a mirror image.  
Timer: you can select the delay time for all modes.  
In Self shot mode, captures by the Capture soft  
key or the Camera ( ) key on the right side of the  
phone. In another modes, captures by the Left soft  
key. When you press the capture key, the phone  
takes the picture after the specified time. When you  
exit the camera mode or select Off in the Timer  
menu, the timer is off.  
Normal shot: you can take a picture in the normal  
mode.  
Self shot: this mode allows you to take a picture  
using the external display. Press the Camera (  
)
key on the right side of the phone after adjusting  
the image, and the phone takes and saves the  
picture. After you take a self shot, press the  
Review soft key to review the taken picture.  
Settings: this option allows you to change the  
options for taking a picture. And this option is  
synchronized with the Settings menu (Menu 8.5).  
Multi-shot: you can take action stills. Select speed  
and the number of pictures you want to take. When  
Photo size: sets the image size to one of  
you press the Capture soft key or the Camera (  
key on the right side of the phone, the phone  
automatically takes and saves the pictures  
successively as many times as you set. A picture  
size set to Mobile(128*120) automatically.  
)
VGA(640*480), QVGA(320*240),  
QQVGA(160*120) and Mobile(128*120). The  
selected image size displays on the capture screen.  
Photo quality: allows you to select the image quality  
from Superfine, Fine, Normal, and Economy.  
The option you select appears on the top of the  
display.  
Night mode: this option allows you to take a picture  
of the best quality when it is dark.  
Capture only: you can take pictures without review.  
Frame: this option allows you to use a frame on  
the picture. Press the navigation key to find the  
150  
151  
Camera  
Camera  
Shutter sound: allows you to select a sound when  
you press the shutter, the Capture soft key or  
Camera ( ) key on the right side of the phone.  
My Photos (Menu 8.2)  
In this menu, you can review the pictures you have  
taken.  
Default name: allows you to change the default  
prefix of the picture name.  
To  
Press the  
Help: this options shows you the functions of the  
navigation keys and the volume keys in the capture  
mode.  
scroll through the  
pictures  
navigation keys.  
show the selected picture View soft key.  
as an enlargement  
Taking a Picture with the Folder Closed  
go back to the multiple  
view mode  
Multi soft key.  
1. Close the folder.  
use the options  
Options soft key.  
For details, see  
page 149.  
2. To turn the camera on, press and hold the  
Camera ( ) key on the right side of the phone.  
The image to be captured appears on the  
display. The volume keys zoom in or out the  
image.  
turn the camera off  
and return to Idle Mode  
key.  
3. Press the Camera ( ) key on the right side of  
the phone to take the picture.  
My Albums (Menu 8.3)  
The picture is automatically saved in the My  
photos menu (Menu 8.2).  
My Album allows you to store the pictures as your  
photo album. Select one of albums. It shows the  
pictures saved in the album. For details about  
viewing your pictures and using them, see  
page 153.  
4. To review the taken picture, open the folder and  
press the No soft key. You can delete the picture  
by pressing the Delete soft key, return to the  
self shot mode by pressing the Preview soft  
key.  
To exit the camera mode, open the folder and  
press the Yes soft key or close the folder.  
152  
153  
Camera  
Camera  
Photo quality: allows you to select the image  
Delete All (Menu 8.4)  
quality from Superfine, Fine, Normal, and  
Economy. The option you select appears on the top  
of the display.  
You can delete all the photos saved in each  
category.  
Shutter sound: allows you to select a sound when  
you press the shutter, the Capture soft key or  
Camera ( ) key on the right side of the phone.  
1. Scroll to a photo box and place a check mark  
ahead it by pressing the Select soft key.  
Selecting All places check marks on all of the  
photo boxes. If you want to delete the protected  
photos, select the With protected photos  
option.  
Default name: allows you to change the default  
prefix of the picture name.  
2. If necessary, repeat step 1 to check another  
box.  
Memory Status (Menu 8.6)  
Camera, Media box and multimedia message boxes  
share a given amount of memory in your phone.  
3. When you have finished checking, press the Ok  
soft key.  
The display shows the status of free and used  
memory.  
4. When a confirming message appears, press the  
Yes soft key to delete all of the photos in the  
box(es).  
You can see the used memory status of Camera,  
Media box and multimedia message boxes by  
pressing the Left or Right key.  
Otherwise, press the No soft key.  
Settings (Menu 8.5)  
This menu option allows you to change the default  
settings of the options for using the camera feature.  
The following options are available:  
Photo size: sets the image size to one of  
VGA(640*480), QVGA(320*240),  
QQVGA(160*120) and Mobile(128*120). The  
selected image size displays on the capture screen.  
154  
155  
Using ALS (Alternate Line Service)  
Using ALS (Alternate  
Line Service)  
The ALS feature enables two lines to be associated  
with one SIM card. Consequently, you can make  
and receive calls on either line. If you subscribe to  
this network service, a few additional menu options  
enable you to set up this feature.  
Setting Call Diverting Options  
You can set up call diverting via the Call diverting  
menu option (Menu 6.1). This service reroutes  
incoming calls on the line of your choice to a  
specified number. For further details, see page 122.  
Viewing Call Information  
Note: Please contact your service provider to check  
the availability of this feature and how to  
subscribe to ALS.  
You can view call times and last call cost  
information for each line. For further details, see  
page 92.  
Selecting a Line  
You can select a line for each call via the Active  
line menu option (Menu 6.6). For further details,  
refer to page 129.  
Editing the Line Name  
You can edit the name of each line via the Own  
number menu option.  
When you edit the name of a line, this name  
replaces “Line 1” or “Line 2, as applicable. For  
further details, refer to page 63.  
Setting the Ring Type  
To distinguish between incoming calls on the two  
lines, you can select a different ring tone for each  
line via the Incoming calls menu option (Menu  
3.1). For further details, see page 94.  
156  
157  
Solving Problems  
Solving Problems  
“No service” displays  
Before contacting the after-sales service, perform  
the following simple checks. They may save you the  
time and expense of an unnecessary service call.  
• The network connection was lost. You may be in a  
weak reception area (in a tunnel or surrounded  
by buildings). Move and try again.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
When you switch your phone on, the  
following messages may appear  
No SIM card  
Check that the SIM card is correctly installed.  
You have entered a number but it was  
not dialled  
Phone locked Enter password  
• Have you pressed the  
key?  
The Phone lock feature is enabled. You must enter  
the phone’s password before you can use the  
phone.  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
Enter PIN  
Your correspondent cannot reach you  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
supplied with the SIM card.  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
• The PIN check feature is enabled. Every time the  
phone is switched on, you must enter the PIN. To  
disable this feature, use the PIN check menu  
option (Menu 4.4.1). See page 102.  
Your correspondent cannot hear you  
speaking  
Enter PUK  
• Have you switched off the microphone (Mute  
appears)?  
The PIN was entered wrongly three times in  
succession and the phone is now blocked. Enter the  
PUK supplied by your network operator.  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
158  
159  
Solving Problems  
Access Codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help you  
protect the phone against unauthorised use.  
The phone starts beeping and “Battery  
Low” flashes on the display  
The battery is insufficiently charged. Replace the  
battery and recharge it.  
Some access codes can be changed using the  
Security menu option (Menu 4.4). See page 102  
for further details.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
Phone Password  
The Phone lock feature (see page 103) uses the  
phone password to protect your phone against  
unauthorised use.  
No number is dialled when you recall a  
Phonebook entry  
The phone password is supplied with the phone and  
is preset to “00000000” at the factory. To change  
the password, use the Change password menu  
option (Menu 4.4.4). See page 103.  
• Check that the number has been stored correctly,  
by using the Phonebook Search feature.  
• Re-store them, if necessary.  
If the above guidelines do not help you to solve  
the problem, take a note of:  
PIN  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
The PIN (Personal Identification Number) protects  
your SIM card against unauthorised use. It is  
usually supplied with the SIM card. When the PIN  
Check feature is enabled (see page 102), you must  
enter the PIN each time you switch on the phone.  
Then contact your local dealer or Samsung  
after-sales service.  
If you key in an incorrect PIN three times in  
succession, key in the PUK and press the Ok soft  
key to unlock the phone. Key in a new PIN and  
press the Ok soft key. Key in the new PIN again and  
press the Ok soft key.  
160  
161  
Access Codes  
Access Codes  
PIN2  
Call Barring Password  
The PIN2, supplied with some SIM cards, is required  
to access some functions, such as charging unit  
counters. These functions are only available if  
supported by your SIM card.  
The 4-digit call barring password is required when  
you use the Call Barring function. You obtain the  
password from your service provider when you  
subscribe to this function.  
If you key in an incorrect PIN2 three times in  
succession, key in the PUK2 and press the Ok soft  
key to unlock the phone. Key in a new PIN2 and  
press the Ok soft key. Key in the new PIN2 again  
and press the Ok soft key.  
You can change this password using the Change  
barring password menu option (Menu 6.2.7).  
For further details, see page 126.  
PUK  
The PUK (PIN Unblocking Key) is required to change  
a blocked PIN. The PUK may be supplied with the  
SIM card. If not, contact your local service provider.  
If you key in an incorrect PUK ten times in  
succession, the SIM card cannot be used anymore.  
Contact your service provider for a new card.  
You cannot change the PUK. If you lose the code,  
contact your service provider.  
PUK2  
The PUK2, supplied with some SIM cards, is  
required to change a blocked PIN2.  
If you key in an incorrect PUK2 ten times in  
succession, you cannot use the functions requiring  
the PIN2. Contact your service provider for a new  
card.  
You cannot change the PUK2. If you lose the code,  
contact your service provider.  
162  
163  
Health and Safety Information  
Health and Safety  
Information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
Exposure to Radio-Frequency Energy  
(SAR Information)  
This phone meets European Union (EU)  
requirements concerning exposure to radio waves.  
network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured, so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by the EU Council.  
These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the  
general population. The guidelines were developed  
by independent scientific organisations through the  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
Before a new model phone is available for sale to  
the public, compliance with the European R&TTE  
Directive must be shown. This directive includes as  
one of its essential requirements the protection of  
the health and safety of the user and any other  
person.  
Precautions When Using Batteries  
• Never use any charger or battery that is damaged  
in any way.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
• Use the battery only for its intended purpose.  
*
the EU Council is 2.0W/kg.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
The Hightest SAR Value for this model phone was  
0.733 W/kg.  
• Battery charging time depends on the remaining  
battery charge and the type of battery and  
charger used. The battery can be charged and  
discharged hundreds of times, but it will  
gradually wear out. When the operation time  
(talk time and standby time) is noticeably shorter  
than normal, it is time to buy a new battery.  
* The SAR limit for mobile phones used by the public is  
2.0 watts/kilogram (W/kg) averaged over ten grams of  
body tissue. The limit incorporates a substantial margin  
of safety to give additional protection for the public and  
to account for any variations in measurements. The SAR  
values may vary depending on national reporting  
requirements and the network band.  
164  
165  
Health and Safety Information  
Health and Safety Information  
• If left unused, a fully charged battery will  
discharge itself over time.  
Road Safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations in a given area or  
country.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
Operating Environment  
Remember to follow any special regulations in force  
in any area and always switch off your phone  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
166  
167  
Health and Safety Information  
Health and Safety Information  
Other Medical Devices  
Electronic Devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch off your phone  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
• should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
Posted Facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
• should not carry the phone in a breast pocket  
• should use the ear opposite the pacemaker to  
minimise potential interference  
If you have any reason to suspect that interference  
is taking place, switch off your phone immediately.  
Hearing Aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
168  
169  
Health and Safety Information  
Health and Safety Information  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
Potentially Explosive Atmospheres  
Switch off your phone when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
Users are advised to switch off the phone while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas  
(such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust  
or metal powders, and any other area where you  
would normally be advised to turn off your vehicle  
engine.  
3. Press the  
key.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not cut off the call until given  
permission to do so.  
Emergency Calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
emergencies, for example).  
170  
171  
Health and Safety Information  
Health and Safety Information  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
Other Important Safety Information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Check regularly that all wireless phone  
equipment in your vehicle is mounted and  
operating properly.  
• Do not store or carry flammable liquids, gases or  
explosive materials in the same compartment as  
the phone, its parts or accessories.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
• Do not drop, knock or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
• Switch off your phone before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove or a radiator.  
The phone may explode when overheated.  
• Use only the supplied or an approved  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
Care and Maintenance  
• Keep the phone and all its parts and accessories  
out of the reach of small children’s.  
• If the phone, battery, charger or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
• Keep the phone dry. Precipitation, humidity and  
liquids contain minerals that will corrode  
electronic circuits.  
172  
173  
Glossary  
Glossary  
EMS (Enhanced Message Service)  
To help you understand the main technical terms  
and abbreviations used in this booklet and take full  
advantage of the features of your mobile phone,  
here are a few definitions.  
Network service sending and receiving messages  
that include images, sounds and animations to and  
from another user without having to speak to the  
correspondent.  
ALS (Alternate Line Service)  
GPRS (General Packet Radio Service)  
Capability of associating two lines with one SIM  
card. With this service, you can make and receive  
calls on either line, as required.  
New non-voice value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS guaranties continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
Call Barring  
Ability to restrict outgoing and incoming calls.  
Call Diverting  
Ability to reroute calls to another number.  
GSM (Global System for Mobile  
Communication)  
Call Holding  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call Waiting  
IrDA (Infrared Data Association)  
Ability to inform users that they have an incoming  
call when engaged on another call.  
A standard defined by the IrDA consortium. It  
specifies a way to wirelessly transfer data via  
infrared radiation. The IrDA specifications include  
standards for both the physical devices and the  
protocols they use to communicate with each other.  
CLI (Caller Line Identification) Services  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
MMS (Multimedia Message Service)  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
174  
175  
Glossary  
Glossary  
users, MMS is similar to Short Message Service  
(SMS)-it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers, thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can also be sent by  
e-mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and later also video clips and presentation  
information.  
SDN (Service Dialling Numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support  
and emergency services.  
SIM (Subscriber Identification Module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot  
on the back of the phone and is protected by the  
battery.  
Multiparty Calling  
Ability to establish a conference call involving up to  
five additional parties.  
SMS (Short Message Service)  
PIN (Personal Identification Number)  
Network service sending and receiving messages to  
and from another subscriber without having to  
speak to the correspondent. The message created  
or received can be displayed, received, edited or  
sent.  
Security code that protects the phone/SIM against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
Soft Keys  
PUK (PIN Unblocking Key)  
Two keys marked  
purpose of which:  
and  
on the phone, the  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
• varies according to the function that you are  
currently using  
• is indicated on the bottom line of the display just  
above the corresponding key  
Roaming  
Use of your phone when you are outside your home  
area (when travelling for example).  
Voice Mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice) and  
records a message.  
176  
177  
Index  
Index  
Earpiece volume • 30  
Emergency calls • 170  
External display • 16  
settings • 99  
Length of calls • 92  
Letters  
entering • 39  
Locking  
phone • 103  
SIM card • 104  
Low battery indicator • 22  
,
97  
holding • 32  
international • 27  
log • 27  
A
ABC mode • 39  
,
43  
Access codes • 161  
making • 26  
F
Accessories •  
Active line  
9
missed • 28 90  
,
FDN mode • 104  
Fixed Dial Number mode •  
104  
Fun box • 130  
Functions, select • 24  
multi-party • 35  
received • 90  
records • 90  
select • 129  
service, use • 156  
Alarm, set • 116  
Alert type • 95  
ALS • 156  
Auto redial, set • 105  
Autopower alarm • 117  
redialling • 27  
M
automatically • 105  
Maintenance • 172  
Media box • 137  
Memory status, phonebook •  
65  
rejecting • 29  
ring tone • 94  
G
searching for a number  
in phonebook • 53  
times • 92  
Games • 144  
Bowling • 147  
Memos  
B
Go! Hamster • 146  
Honey Ball • 145  
Greeting message • 98  
Group settings • 64  
making • 108  
,
111  
waiting • 33  
,
127  
background image, set • 99  
viewing 112  
Menu  
list • 47  
scrolling • 46  
Messages  
Card, SIM  
Backlight • 17  
,
98  
dialling numbers • 59  
inserting • 18  
locking • 104  
removing • 19  
Barring  
calls • 124  
Battery  
I
charging • 21  
installing • 19  
low battery indicator •  
22  
precautions • 165  
removing • 20  
MMS • 72  
SMS • 66  
Messages • 66  
Care • 172  
Characters  
entering • 39  
Clock • 114  
Conference calls • 35  
Connection tone • 96  
Conversion, unit • 119  
Cost of calls • 92  
Icons • 14  
Inbox • 67  
Input mode  
alert types • 95  
broadcast • 84  
changing • 40  
language, set • 101  
International calls • 27  
Internet • 130  
deleting • 72 82  
,
Broadcast • 84  
Browser, WAP • 130  
greeting • 98  
inbox • 67  
outbox • 71  
preset • 84  
reading • 67  
ring tone • 95  
voice mail • 83  
writing • 69  
C
K
D
Calculator • 118  
Calendar • 110  
Caller  
Key tones  
Date, set • 114  
Dialled calls • 91  
Dialling • 26  
SIM card numbers • 59  
Display  
type, select • 96  
volume • 30  
Keys  
groups • 64  
ID • 129  
Microphone, mute • 31  
Minute minder • 97  
location • 10  
Calls  
Missed calls • 28  
,
90  
contrast • 100  
external • 16  
icons • 14  
language • 101  
main • 13  
settings • 98  
alert type • 94  
answering • 29  
Multi-party calls  
L
making • 35  
a second call • 33  
Language, set • 101  
private conversation •  
barring • 124  
costs • 92  
dialled • 91  
diverting • 122  
emergency • 170  
ending • 29  
LCD  
36  
contrast • 100  
external • 16  
icons • 14  
removing a participant •  
37  
E
main • 13  
Ear-microphone • 38  
178  
179  
Index  
Index  
Problem, solve • 158  
PUK • 162  
SIM card  
dialling numbers • 59  
N
Names  
PUK2 • 162  
inserting • 18  
locking • 104  
removing • 19  
entering • 39  
searching/dialling • 53  
storing • 56  
Q
SMS • 66  
Soft keys, use • 23 24  
Network selection • 128  
Network services • 122  
Numbers  
Quiet mode • 97  
,
Sound settings • 94  
Speed-dialling • 57  
Stopwatch • 121  
Switching on/off  
R
correcting • 26  
FDN • 104  
Received calls • 90  
Redialling  
automatically • 105  
Reset settings • 107  
Ringer  
mode • 39 45  
,
microphone • 31  
phone • 23  
speed-dial • 57  
storing • 56  
Symbolic mode • 39 45  
,
incoming calls • 94  
messages • 95  
Road safety • 167  
O
T
Options, select • 24  
Organiser • 108  
Outbox • 71 80  
T9 mode • 39  
Text  
,
41  
,
entering • 39  
input modes • 39  
language • 101  
S
Safety  
P
batteries • 165  
electronic devices • 168  
explosiveatmospheres•  
170  
Time  
Password  
setting • 114  
world • 114  
barring • 126  
phone • 103  
,
163  
,
161  
Timer • 120  
To do list • 113  
Tone  
Personal Identification  
Number • 161  
Phone  
information • 164  
,
172  
medical devices • 169  
operating environment •  
167  
connection • 96  
keypad • 96  
message • 95  
layout • 10  
settings • 98  
precautions •  
road • 167  
7
switching on/off • 23  
Phonebook • 53  
power on/off • 96  
Travel adapter • 21  
Second call, answer• 33  
Security settings • 102  
Service directory, dial • 65  
Settings  
copying numbers • 55  
deleting numbers • 55  
editing numbers • 55  
erasing numbers • 55  
memory status • 65  
sending SMS • 55  
storing numbers/names  
V
Volume  
alarm • 116  
date • 114  
call ringer • 94  
earpiece • 30  
keys • 30  
display • 99  
network • 122  
phone • 98  
56  
PIN • 161  
reset • 107  
security • 102  
sound • 94  
text language • 101  
time • 114  
W
changing • 102  
checking • 102  
Waiting call • 33 127  
,
PIN2 • 162  
WAP Browser • 130  
World time • 114  
changing • 104  
Power on/off tone • 96  
Preset messages • 84  
Side key • 105  
WWW Services • 130  
180  
181  
Index  
182  
183  
184  

West Bend COFFEE CENTER User Manual
Vestax CDX 35C User Manual
Super Talent Technology SecureLock AES 256 User Manual
Sony Ericsson V600 User Manual
Seagate STBV1000100 User Manual
Seagate ST3300555SS User Manual
Samsung GH68 02605A User Manual
Samsung DLP TV SP50L6HX User Manual
Samsung SGH S105 User Manual
Sagem 226 User Manual