Samsung SGH E360 User Manual

Depending on the software installed or your service provider or country,

some of the descriptions in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this guide.

Printed in Korea

Code No.:GH68-08186A

English.12/2005 Rev.1.1

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

• The phone could explode if the battery is replaced

with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Water resistance

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 88.

Key in the emergency number for your present

location, then press

About this Guide

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful attention

to the subsequent information regarding safety

or phone features.

Indicates that you can get more information on

the referenced page.

ꢀ

•

FM radio

Listen to your favourite radio

channels anytime, anywhere.

Indicates that you need to press the Navigation

keys to scroll to the specified option and then

select it.

→

•

MP3 player

Play MP3 music files using your

phone as an MP3 player.

Indicates a key on the phone. For example,

[

]

[

Indicates a soft key, whose function is displayed

on the phone screen. For example, <Menu

< >

•

Bluetooth

•

E-mail

Transfer media files and personal

data and connect to other devices

using free, wireless Bluetooth

technology.

Send and receive e-mails with images, video, and

audio attachments.

•

Web browser

Access the wireless web to get

current information and up-to-the-

minute a wide variety of media

content.

•

Get personal with photo caller

See who’s calling you when their

very own photo displays.

•

Java

Name card

Create name cards with your

number and profile.

Enjoy Java™-based embedded

games and download new games.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

Multimedia Message Service (MMS)

Send and receive MMS messages with a

combination of text, images, video, and audio.

Voice recorder

•

SOS message

Record memos or sounds.

Send SOS messages to your family or friends for

help in an emergency.

Browse the web...................................................... 16

Use Phonebook ...................................................... 17

Send messages...................................................... 18

View messages....................................................... 19

Use Bluetooth ........................................................ 20

Quickly launch menus by number ............................. 21

Send SOS messages ............................................... 22

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

ABC, T9, Number, and Symbol mode

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone..................................... 7

Power on or off........................................................ 8

Keys and display ..................................................... 9

Access menu functions ............................................ 11

Customise your phone............................................. 12

Make/Answer calls .................................................. 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Begin with your camera, MP3 player, web, and other special

features

Use the camera...................................................... 14

Play MP3s.............................................................. 15

Index

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call records

ꢀ

p. 30

3 Applications

ꢀ

p. 36

5 Messages

ꢀ

p. 48

8 Camera

9 Settings

ꢀ

p. 69

p. 74

1 Recent contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Delete all

ꢀp. 30

ꢀp. 31

1 MP3 player

2 Voice recorder

3 Java world

4 FM radio

5 World time

6 Alarm

7 Calculator

8 Convertor

9 Timer

ꢀp. 36

ꢀp. 38

ꢀp. 39

ꢀp. 40

ꢀp. 42

ꢀp. 43

ꢀp. 44

1 Create new message

2 My messages

3 Templates

4 Delete all

5 Settings

6 SOS message

7 Broadcast messages

8 Memory status

ꢀp. 48

ꢀp. 51

ꢀp. 55

ꢀp. 56

ꢀp. 61

ꢀp. 62

ꢀ

1 Time & Date

2 Phone settings

3 Display settings

4 Sound settings

5 Light settings

6 Network services

7 Bluetooth

8 Security

9 Memory status

10 Reset settings

ꢀp. 74

ꢀp. 75

ꢀp. 77

ꢀp. 78

ꢀp. 79

ꢀp. 82

ꢀp. 84

ꢀp. 85

6 Call time

7 Call costs^*

2 Phonebook

ꢀp. 32

6 File manager

ꢀp. 62

10 Stopwatch

1 Contact list

2 FDN list

3 Add new contact

4 Group

ꢀp. 32

ꢀp. 33

ꢀp. 34

ꢀp. 35

ꢀp. 36

11 SIM AT^*

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀp. 62

ꢀp. 63

ꢀp. 64

ꢀp. 65

4 Browser

ꢀp. 44

5 Speed dial

1 Home

ꢀ

p. 45

p. 46

6 My name card

7 Own number

8 Management

9 Service number^*

2 Bookmarks

3 Go to URL

4 Clear cache

5 Profile settings

6 Current profile

* Shows only if supported by your

SIM card.

7 Calendar

ꢀp. 65

p. 47

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Phone

Travel Adapter

Camera lens

Navigation keys

(Up/Down/Left/

Right)

Web access/

Confirm key

External

display

Camera key

Headset jack

Left soft key

Battery

User’s Guide

Right soft key

MP3 player/

FM radio

control keys

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Volume keys

Dial key

Delete key

Alphanumeric

The items supplied with your phone

and the accessories available at your

Samsung dealer may vary, depending

on your country or service provider.

keys

Special

function keys

Microphone

Get started

First steps to operating your phone

Install the battery.

Plug the travel adapter

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged (the

battery icon becomes still), unplug the adapter

from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding [

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

press <OK>.

Low battery indicator

use is prohibited.

When the battery is low:

•

a warning tone sounds,

1. Open the phone.

Switch off

the low battery message displays, and

the empty battery icon

blinks.

2. Press and hold [

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

Keys and display

Keys

Enter numbers, letters, and some special

characters.

In Idle mode, press and hold [1] to access

your voicemail server. Press and hold [

0] to

Perform the function indicated on the bottom

line of the display.

enter an international call prefix.

Enter special characters.

In Idle mode, access your favourite menus

directly.ꢀp. 75

In Idle mode, press and hold [ ] to activate

or deactivate Quiet mode. Press and hold

In Menu mode, scroll through menu options.

[

] to enter a pause between numbers.

In Idle mode, launch the web browser.

In Menu mode, select the highlighted menu

option or confirm input.

Adjust the phone volume.

In Idle mode, with the phone open, adjust

the keypad tone volume. With the phone

closed, hold down to turn on the backlight.

Make or answer a call.

In Idle mode, retrieve the recent numbers

dialled, missed, or received.

In Idle mode, press and hold to turn on the

camera.

In Camera mode, take a photo or record a

video.

Delete characters from the display.

(on the right)

(on the front)

End a call.

Press and hold to switch the phone on or off.

In Menu mode, cancel input and return the

phone to Idle mode.

Press and hold to display the function

selection screen to access the MP3 player or

the FM radio.

In the MP3 player, start or stop playback.

In the FM radio, turn the radio on or off.

Get started

Move back to the previous file during

playback.

Scan through radio channels.

New text message

New multimedia message

New e-mail

(on the front)

New voicemail

One of the message Inboxes is full

Skip to the next file during playback.

Scan through radio channels.

(on the front)

SOS message

ꢀp. 61

Display

Call diverting feature active

Bluetooth active

Layout

Icons

display various icons.

Connected to Bluetooth hands-free

car kit or headset

GPRS network

Text and graphics

display messages,

instructions, and

information you enter.

Roaming network

Home Zone, if registered for the

appropriate service

Office Zone, if registered for the

appropriate service

Soft key function

indicators

show the current functions

assigned to the soft keys.

Contacts

Icons^*

Call ringer set to vibrate

Quiet mode

Mute mode, during a call

Battery power level

Received signal strength

Call in progress

Out of your service area; you

cannot make or receive calls

Alarm set

* Depending on your country or service provider, the icons

shown on the display may vary.

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [

] to

confirm the function displayed

or option highlighted.

Select

Back

4. To exit, choose either of the

following methods.

•

Press <Back> to move up

one level.

•

Press [

mode.

] to return to Idle

Use shortcuts Press the number key

corresponding to the option you

want. For the index numbers 10 and

11, press [ ] and [ ] respectively.

Press the right

soft key to return

to the previous

menu level.

Press the left

soft key to select

the highlighted

option.

Get started

Customise your phone

You can set wallpaper for the idle

screen on each display.

Idle mode

wallpaper

1. In Idle mode, press <Menu

Display

language

1. In Idle mode, press <Menu

and select Settings Display

settings Wallpaper

and select Settings

settings Language

2. Select a language.

→

Phone

→

Main

display or Cover display

2. Select an image category.

3. Select an image.

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

→

Incoming call

→

4. Press <Select>.

5. Press <Save>.

2. Select a ringtone category.

3. Select a ringtone.

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

4. Press <Save>.

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on power-up.

You can set the Navigation keys as

shortcuts to access your favourite

menus.

Phone lock

shortcuts

1. In Idle mode, press <Menu

and select Settings Phone

settings Short cut

2. Select a key.

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

→

3. Select a menu to be assigned to

the key.

00000000, and press <OK>.

3. Enter a new 4- to 8-digit

You can switch the phone to Quiet

mode to avoid disturbing other

people.

Quiet mode

password and press <OK>.

4. Enter the new password again

and press <OK>.

Press and hold [ ] in Idle mode.

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

Make/Answer calls

Step outside the phone

Begin with your camera, MP3 player, web, and other

special features

1. In Idle mode, enter an area

Make a call

code and phone number.

Use the camera

2. Press [ ].

3. To end the call, press [ ].

1. Open the phone.

Take a photo

1. When the phone is ringing,

press [ ].

2. In Idle mode, press and hold

Answer a call

[

]

to turn on the camera.

2. To end the call, press [ ].

3. Aim the lens at the subject and

adjust the image.

Press [

4. Press [ ] to take a photo. The

photo is saved automatically.

Adjust the

volume during

a call

5. Press <Back> to return to

Capture mode.

1. In Idle mode, press <Menu

and select File manager

Images Photos

2. Select the photo you want.

View a photo

→

Play MP3s

1. In Idle mode, press and hold

Record a video

[

] to turn on the camera.

Use these methods:

Copy MP3 files

to the phone

2. Press [

1] to switch to Record

•

Download from the wireless

web p. 44

mode.

ꢀ

3. Press [ ] to start recording.

•

Download from a computer

4. Press [ ] to stop recording.

The video is saved

using the optional Samsung PC

StudioꢀSamsung PC Studio

automatically.

User’s Guide

5. Press < > to record another

video.

•

Receive via Bluetoothꢀp. 84

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to list Add all or Add a

file

3. For Add a file, press [

Create a play

list

1. In Idle mode, press <Menu

and select File manager

Videos Videos

2. Select the video you want.

→

Play a video

→

] to

select the files you want and

press <Add>.

Step outside the phone

Browse the web

4. Press <Back> to return to the

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

MP3 player screen.

1. From the MP3 player screen,

Play MP3 files

press [

2. During playback, use the

following keys:

In Idle mode, press [

Launch the

web browser

•

: pauses or resumes

playback.

•

Left: moves back to the

previous file. Moves

backward in a file when

pressed and held.

Right: skips to the next file.

Skips forward in a file when

pressed and held.

•

To scroll through browser items,

press [Up] or [Down].

Navigate the

web

•

To select an item, press [

To return to the previous page,

press <Back> or [ ].

•

To access browser menu

options, press [ ] or select

•

Up: opens the play list.

: adjusts the volume.

To access web page options,

press [ ].

Down: stops playback.

Use Phonebook

1. In Idle mode, press

Contacts>.

Find an entry

To the phone’s memory:

Add an entry

2. Enter a name or scroll to an

entry.

1. In Idle mode, enter a phone

number and press <Save>.

3. Select an entry.

2. Select Phone

→

a number type.

4. Scroll to a number and press

3. Specify contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Graphic ID, Alert, Group, and

Notes.

[

]

to dial, or press [

] to

edit contact information.

1. In Idle mode, press <Menu

and select Phonebook My

name card

Create and

send a name

card

→

4. Press <Save> to save the

entry.

2. Specify your contact

information.

To the SIM card:

1. In Idle mode, enter a phone

3. Press <Save> to save the

number and press <Save>.

name card.

2. Select SIM

4. To send the name card to other

3. Enter a name.

people, press <Options> and

select Send via

method.

→

a sending

4. Press <Save> to save the

entry.

Step outside the phone

Send messages

4. Select Picture & Video or

Sound

1. In Idle mode, press <Menu

Send a text

message (SMS)

5. For Picture & Video, select

Picture or Video and add an

image or video clip.

and select Messages

new message Text

message

2. Enter the message text.

3. Press <Options> and select

→

Create

→

For Sound, select a sound

category and add a sound clip.

6. Select Message

7. Enter the message text and

press [ ].

8. Press <Options> and select

Send

Save and send or Send only

4. Enter destination numbers.

5. Press [

message.

] to send the

9. Enter destination numbers or

e-mail addresses.

1. In Idle mode, press <Menu

and select Messages Create

new message Multimedia

message

2. Select Subject

3. Enter the message subject and

press [ ].

Send a

→

multimedia

message

(MMS)

→

10.Press [

message.

] to send the

View messages

1. In Idle mode, press <Menu

Send an e-mail

and select Messages

→

Create

When a notification appears:

View a text

message

new message

→

1. Press <View>.

2. Select Subject

2. Select the message from the

Inbox.

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

From the Inbox:

1. In Idle mode, press <Menu

and select Messages My

messages Inbox

→

[

→

2. Select an SMS message ( ).

7. Add image, video, sound, music

files, or document files.

When a notification appears:

1. Press <View>.

View a

multimedia

message

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10.Press [ ] to send the e-mail.

2. Press <Options> and select

Retrieve

3. Select the message from the

Inbox.

Step outside the phone

Use Bluetooth

From the Inbox:

View a

multimedia

message

(continued)

Your phone is equipped with Bluetooth technology

which enables you to connect the phone wirelessly to

other Bluetooth devices and exchange data with them,

talk hands-free, or control the phone remotely.

1. In Idle mode, press <Menu

and select Messages

messages Inbox

→

2. Select an MMS message (

In Idle mode, press <Menu> and

Turn on

Bluetooth

select Settings

→

Bluetooth

→

1. In Idle mode, press <Menu

View an e-mail

Activation On

→

and select Messages

→

messages Email box

→

1. In Idle mode, press <Menu

and select Settings

Bluetooth My devices

2. Select Check new mail to

download new e-mails or

headers.

Search for and

pair with a

Bluetooth

device

→

Search new device

3. Select an e-mail or a header.

4. If you selected a header, press

2. Select a device.

3. Enter a Bluetooth PIN or the

other device’s Bluetooth PIN, if

it has one, and press <OK>.

Options> and select

Retrieve

When the owner of the other

device enters the same code,

pairing is complete.

Quickly launch menus by number

1. Access an application,

Phonebook File manager, or

Calendar

Send data

You can quickly access the alarm,

convertor, and calendar applications

Access

applications

from the dialling screen.

2. Scroll to an item.

1. For an alarm or scheduled

event, enter the time you want

as 4-digit in Idle mode.

3. Press <Options> and select

Send via

→

Bluetooth.

4. Select a device.

For the convertor, enter the first

number you want to use.

5. If necessary, enter the

Bluetooth PIN and press <OK>.

2. Press one of the Navigation

keys.

To receive data via Bluetooth, your

phone’s Bluetooth feature must be

active.

Receive data

You can access the following

applications:

Key

Application

Alarm p. 42

p. 43

p. 48

p. 66

If necessary, press <Yes> to

confirm the reception.

ꢀ

Down Convertor

Left Messages

Right Calendar

ꢀ

Step outside the phone

Send SOS messages

1. In Idle mode, press <Menu

Setting the SOS

message

feature

and select Messages

message

→

SOS

2. Select Yes on the Message

sending field.

3. Select Recipients

4. Enter the phone numbers to

which you want to send SOS

messages.

5. Press [

settings.

] to save your

In Idle mode, with the phone

closed, press [ / ] 4 times.

Send SOS

messages

The phone will send SOS

messages.

Using ABC mode

Press the appropriate key until the character you want

appears on the display.

Enter text

ABC, T9, Number, and Symbol mode

You can enter text for some features, such as

Messages, Phonebook, or Calendar, using ABC mode,

T9 mode, Number mode, and Symbol mode.

Characters in order displayed

Key

Upper case

Lower case

Changing the text input mode

•

Press the right soft key to change the text input

mode. (

: T9 mode,

: ABC mode,

: Number mode, and

: Symbol mode)

•

Press and hold [ ] to switch to Symbol mode.

To enter the other languages in the text input

mode, press <Options> and select Language

select

Or, press and hold the right soft key and select the

language you want.

(Creating an SMS message with GSM-alphabet encoding)

Enter text

T9 predicts the word that you are typing, and it

may change with each key that you press.

Tips for using ABC mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

2. Enter the whole word before editing or deleting

characters.

3. When the word displays correctly, go to step 4.

•

Press [ ] to change the case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

Otherwise, press [

choices for the keys that you have pressed.

For example, Of and Me use [ ] and [ ].

0] to display alternative word

)

•

Press [ ] to insert a space.

4. Press [ ] to insert a space and enter the next

word.

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

Tips for using T9 mode

C] to clear the display.

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to change the case. Lower case (No

indicator), Initial capital ( ), and Capital lock (

are available.

)

•

Press [ ] to insert a space.

Entering a word in T9 mode

Press the Navigation keys to move the cursor.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter Hello in T9 mode.

2] to [9] to start entering a word. Press

Press [

and hold [

] to delete characters one by one. Press

C] to clear the display.

5], [5], and [6] to

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

Using Symbol mode

Symbol mode enables you to insert symbols.

Press

2. Press [0] to display alternative words for your key

display more symbols

select a symbol

[Up] or [Down].

presses. When there are no more alternative

words, Spell appears on the bottom line.

the corresponding

number key.

3. Press <Spell>.

4. Enter the word you want using ABC mode and

clear the entered symbols

insert the symbols

[

press <OK>.

OK>.

Using Number mode

Number mode enables you to enter numbers.

Press the keys corresponding to the digits you want.

1. In Idle mode, press [ ] to display the list of

recent numbers.

Call functions

2. Scroll to the number you want and press [ ].

Advanced calling features

Making a call from Phonebook

Making a call

1. In Idle mode, enter the area code and phone

number.

Once you have stored a number in Phonebook, you

can dial the number by selecting it from Phonebook.

ꢀp. 32

2. Press [ ].

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

• Press [

C] to clear the last digit or press and hold

] to clear the whole display. You can move the

keys.

ꢀp. 34

cursor to edit an incorrect digit.

• Press and hold [ ] to enter a pause between

numbers.

You can quickly dial a number from the SIM card using

its location number assigned when stored.

1. In Idle mode, enter a location number and press

Making an international call

1. In Idle mode, press and hold [

[

0]. The

character

2. Press [Left] or [Right] to scroll through other

numbers.

appears.

2. Enter the country code, area code, and phone

number, then press [ ].

3. Press <Dial> or [ ] to dial the number you want.

Redialling recent numbers

Ending a call

Close the phone or press [ ].

Answering a call

Using the headset

When you receive an incoming call, the phone rings

and displays the incoming call image.

Use the headset to make or answer calls without

holding the phone.

Press <Accept> or [ ] to answer the call.

Connect the headset to the jack on the left side of the

phone. The button on the headset works as listed

below:

Tips for answering a call

•

When Anykey answer is active, you can press

any key, except for <Reject> or [ ]. p. 76

When Active folder is active, you can simply open

the phone. p. 76

Press <Reject> or [ ] to reject a call.

Press and hold [ ] to reject a call or mute the

ringer, depending on the Volume key

setting. p. 76

Press

ꢀ

•

redial the last call

the button and then press

and hold it again.

ꢀ

•

answer a call

end a call

and hold the button.

ꢀ

Options during a call

You can access a number of functions during a call.

Viewing missed calls

If you have missed calls, the screen displays how

many calls you have missed.

Adjusting the volume during a call

1. Press <View>.

Use [

] to adjust the earpiece volume during a call.

2. If necessary, scroll through the missed calls.

3. Press [ ] to dial the number you want.

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Call functions

Using the Speakerphone feature

Answering a second call

Use the Speakerphone feature to talk and listen with

the phone a short distance away.

You can answer an incoming call while already on the

phone, if your network supports it and you have

activated the call waiting feature.ꢀp. 81

1. During a call, press [

] to listen and talk to the

icon appears.

other person hands-free. The

1. Press [ ] to answer the call. The first call is

automatically put on hold.

2. Press [

mode. The

] again to return to normal phone

icon appears.

2. Press <Swap> to switch between the calls.

3. Press <Opt.> and select End held call to end the

Placing a call on hold/Retrieving

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

call on hold.

4. To end the current call, press [ ].

Using In-call options

Press <Options> to access the following options

during a call:

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

•

Voice clarity on/Voice clarity off: remove

extraneous noise and increase call quality so that

the person with whom you are speaking can hear

you clearly even if you are in a noise place.

4. Press <Opt.> and select End held call to end the

If you are using the Speaker feature, you must

first deactivate it in order to use the Voice Clarity

feature.

call on hold.

5. To end the current call, press [ ].

•

Mute

Unmute: switch off the phone’s microphone

option is available when you use a SIM card

supporting SIM AT menus.

so that the other person on the phone cannot hear

you, or switch it back on.

•

Transfer: transfer the currently active call to a

caller on hold. The two callers can talk to each

other, but you are disconnected from the call.

Mute keys/Send keys: switch the key tones on

or off.

•

End held call: disconnect the call currently on

hold.

To communicate with answering machines or

computerised telephone systems, Send keys

must be selected.

Join: set up a multi-party call by adding a caller

on hold to a currently active call. You can include

up to 5 people on a multi-party call.

•

Phonebook: access the contact list.

Send DTMF: send the DTMF (Dual tone multi-

frequency) tones as a group. The DTMF tones are

the tones used in phones for tone dialling,

sounding when you press the number keys. This

option is helpful for entering a password or an

account number when you call an automated

system, like a banking service.

•

Split: have a private conversation with one multi-

party call participant. The other participants can

converse with each other. After the private

conversation, select Join to return to the

multi-party call.

•

Remove: disconnect one multi-party call

participant.

•

Message: create and send an SMS message or

access received messages.ꢀp. 48

Switch to headset/Switch to phone: switch the

call to a Bluetooth headset or hands-free car kit or

back to the phone.

SIM service: access special services, such as

news, weather forecasts, entertainment, and

location services, provided by your SIM card. This

3. Press [

] to view the details of a call, or [ ] to

Menu functions

dial a number.

All menu options listed

Using call record options

While viewing call details, press <Options> to access

the following options:

Call records (Menu 1)

•

Details: show the details of the selected call.

Use this menu to view the calls you have dialled,

received, or missed, and the length of calls. You can

also check the cost of your calls, if your SIM card

supports this function.

Call: dial the displayed number.

Save as contacts: save the number to

Phonebook.

•

Send message: send an SMS or MMS message to

the selected number.

To access this menu, press <Menu> in Idle mode and

select Call records

Delete: delete the selected call record or all

records.

Recent contacts (Menu 1.1)

This menu displays the most recent calls dialled,

received, or missed.

Missed calls (Menu 1.2)

This menu displays the most recent calls you did not

answer.

Accessing a call record

1. Press [Left] or [Right] to move to another call

type.

Dialled calls (Menu 1.3)

2. Press [Up] or [Down] to scroll through the call list.

This menu displays the most recent calls you have

dialled.

•

Reset timers: reset the call timers. You need to

enter the phone password.

Received calls (Menu 1.4)

This menu displays the most recent calls you have

received.

The password is preset to 00000000. You can

change this password.ꢀp. 84

Delete all (Menu 1.5)

Call costs (Menu 1.7)

Use this menu to delete all of the records in each call

type.

This network feature displays the cost of calls. This

menu is available only if supported by your SIM card.

Note that this is not intended to be used for billing

purposes.

1. Press [

] to select the call types to be cleared.

2. Press <Delete>.

3. Press <Yes> to confirm the deletion.

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Call time (Menu 1.6)

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

•

Max cost: check the maximum cost limit set in

•

Last call time: check the length of your last call.

Set max cost

Total sent: check the total length of all the calls

you have dialled.

•

Reset counters: reset the cost counters.

Set max cost: set the maximum cost authorised

for your calls.

•

Total received: check the total length of all the

calls you have received.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

Menu functions

•

Send message: send an SMS or MMS message to

the selected number, or an e-mail to the selected

address.

Phonebook (Menu 2)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Phonebook.

•

Copy: copy the contact to the phone’s memory, to

the SIM card, or the FDN list.

Send via: send the contact via SMS, MMS, e-mail,

or Bluetooth.

To access this menu, press <Menu> in Idle mode and

select Phonebook

•

Delete: delete the selected contact.

Contact list (Menu 2.1)

Print via Bluetooth: print the contact information

by connecting the phone to a printer via Bluetooth.

Use this menu to search for numbers in Phonebook.

Finding an entry

FDN list (Menu 2.2)

1. Enter the first few letters of the name that you

want to find.

Use this menu to create a list of contacts to be used in

FDN (Fixed Dialling Number) mode, in which the

phone allows outgoing calls only to the specified

phone numbers, if your SIM card supports this

feature. You can activate FDN mode in the FDN mode

2. Select the name from the list.

3. Scroll to a number and press [ ] to dial, or press

[

] to edit contact information.

menu.ꢀp. 85

Using Phonebook options

While viewing contact details, press <Options> to

access the following options:

•

Edit: edit contact information.

•

Mobile

number in any type.

/Home/Office/Fax/Other: add a

Adding a contact

1. From the FDN list, press <Options> and select

•

Email: assign an e-mail address.

Graphic ID: assign an image to alert you to a

call from the person.

Alert: assign a ringtone to alert you to a call

from the person.

Group: assign the contact to a caller group.

Notes: add a memo about the person.

Add

2. Enter your PIN2 and press <OK>.

3. Enter information about the contact:

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

•

4. Press <Save>.

3. Press <Save> to save the contact.

Using contact options

Storing a number on the SIM card

You can access contact options by pressing

1. Select SIM

<Options> in Contact list.

2. Enter information about the contact.

Add new contact (Menu 2.3)

•

Name: assign a name.

Phone number: add a number.

Location: assign a location number.

Use this menu to add a new contact to Phonebook.

Storing a number in the phone’s memory

To assign a caller ID image, ringtone, or group,

the contact must be saved to the phone’s

memory.

1. Select Phone

2. Change the settings or enter information about the

contact.

3. Press <Save> to save the contact.

•

First name/Last name: assign a name.

Menu functions

Group (Menu 2.4)

Speed dial (Menu 2.5)

Use this menu to organise your contacts in caller

groups.

Use this menu to assign a speed dial number (2 to 9)

for 8 of your most frequently called numbers.

Adding members to a caller group

Assigning speed dial numbers

1. Select a group.

1. Select a key location from

for your voicemail server.

9. Key

is reserved

2. Press <Options> and select Add

→

a contact. To

add more contacts, repeat this step.

2. Select a contact from the contact list.

3. Select a number, if the contact has more than one

number.

Managing caller groups

While viewing the group list, press <Options> to

access the following options:

Managing speed dial entries

•

View: display the members of the selected group.

Add: add a new group.

From the Speed dial screen, press <Options> to

access the following options:

•

Add: assign a number to an unassigned key.

Edit: change the group properties.

View: check the name and number assigned to a

key.

Send message: send an SMS, MMS, or e-mail

message to the group members you want.

•

Change: assign a different number to a key.

•

Delete: delete the selected group. Group

members, however, will not be deleted from

Phonebook.

Remove: clear the speed dial setting for a key.

Dialling speed dial entries

In Idle mode, press and hold the appropriate key.

My name card (Menu 2.6)

Own number (Menu 2.7)

Use this menu to create a name card and send it to

other people.

Use this menu to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

Saving your name card

The procedure for creating your name card is the

same as the one for saving a phone number in the

Management (Menu 2.8)

phone’s memory.ꢀp. 33

Use this menu to manage Phonebook entries.

Using name card options

•

Default saving: select a default memory location

for saving contacts. If you select Ask on saving

After saving your name card, press <Options> to

the phone will ask you to select a memory location

each time you save a number.

access the following options:

•

Edit: edit the name card.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

Send via: send the name card via SMS, MMS,

e-mail, or Bluetooth.

Sort by contacts: sort your contacts by the first

name or last name.

•

Exchange namecard: exchange name cards with

another person via Bluetooth.

Delete all: delete all of the contacts from your

phone’s memory, your SIM card, or the FDN list.

•

Remove: delete the name card.

Print via Bluetooth: print the name card

information by connecting the phone to a printer

via Bluetooth.

Memory status: check the number of contacts

you have stored in the phone’s memory and on the

SIM card.

Menu functions

Downloading or receiving music files

Service number (Menu 2.9)

Use these methods to save music files to your phone’s

memory:

Use this menu to view the list of Service Dialling

Numbers (SDN) assigned by your service provider,

including emergency numbers and numbers for

directory enquiries. This menu is available if your SIM

card supports SDN.

•

Download from a computer using the optional

Samsung PC Studio

Guide

ꢀSamsung PC Studio User’s

1. Scroll to the number you want and press <View>.

•

Via an active Bluetooth connection

ꢀp. 84

2. Press <Dial> or [ ].

The downloaded or received files are stored in the

Music folder. p. 64

ꢀ

Creating a play list

1. From the MP3 player screen, press <Options

Applications (Menu 3)

Use this menu to play Java games or play music files.

You can also use convenient features, such as a voice

recorder, alarm clock, calculator, convertor, stopwatch,

and FM radio.

and select Add to list

2. Select either of the following options:

•

Add all: add all of the files in the phone’s

memory to the play list.

Add a file: add a specific file to the play list.

To access this menu, press <Menu> in Idle mode and

select Applications

3. If you selected Add a file, press [

] to check

MP3 player (Menu 3.1)

the files to be added and press <Add>.

4. Press <Back> to return to the MP3 player screen.

Use this menu to enjoy music. First, you need to save

music files into your phone’s memory.

Playing music files

Using MP3 player options

From the MP3 player screen, press [

During playback, use the following keys:

From the MP3 player screen, press <Options> to

access the following options:

•

Play/Pause: begin or pause playback.

Key

Function

Send via: send the current file via e-mail or

Pauses or resumes playback.

Bluetooth.

•

Open play list: access the play list.

Left

Moves back to the previous file. Moves

backward in a file when pressed and held.

Set as: set the file as your ringtone, as a ringtone

for a Phonebook entry, or as an alarm melody.

Right

Skips to the next file. Skips forward in a

file when pressed and held.

•

Remove from play list: remove the selected file.

Settings: change the default settings for playing

music files.

Opens the play list.

Down

Stops playback.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music at

random.

Adjusts the volume level.

Changes the playback animation.

Changes the repeat mode.

Turns Shuffle mode on or off.

Visualization: change the playback animation.

Volume: select a volume level.

•

Properties: access the file properties.

Menu functions

Accessing the play list

Key

Function

From the MP3 player screen, press [Up].

Press <Options> to access the following options:

Adjusts the volume.

Locks the exposed keys when pressed and

held to keep accidental presses from

affecting playback.

•

Play: play the currently selected file.

Add to list: add files to the play list.

Move list: move the selected file to the position

you want within the play list.

•

: keys locked

: keys unlocked

•

Remove: remove the selected file or all files from

the play list.

Voice recorder (Menu 3.2)

Playing MP3 files with the phone closed

Press and hold [ ] and then [ ] to launch the

MP3 player. Use the following keys to control the MP3

player:

Use this menu to record voice memos. A voice memo

can be up to one hour long.

Recording a voice memo

1. Press [

] to start recording.

Key

Function

2. Speak into the microphone.

Begins or pauses playback.

Press [

] to pause or resume recording.

Moves back to the previous file. Moves

backward in a file when pressed and held.

3. Press <Save> or [Down] to end recording. The

voice memo is saved automatically.

4. Press [

] to review the voice memo, or [Up] to

Skips to the next file. Skips forward in a

file when pressed and held.

record a new memo.

•

Default name: change the default prefix of the

voice memo.

Playing a voice memo

1. From the Voice recorder screen, press <Options

and select Go to voice list

Java world (Menu 3.3)

2. Select a voice memo.

Use this menu to access the embedded Java games

and downloaded Java applications.

During playback, use the following keys:

Key

Function

Accessing an embedded game

Pauses or resumes playback.

Moves backward in a memo.

Moves forward in a memo.

Adjusts the volume.

Stops playback.

1. From the Java world screen, select Downloads

2. Select a game.

Left

Right

Using Java game options

From the Java world screen, select Downloads and

press <Options> to access the following options:

Down

•

Launch: launch the selected game.

Application settings: set a game to be continued

when a call comes in or an alarm sounds during

the game. You can also set the phone to exchange

game information with the network while playing

an online game or when you need to connect to

the Internet.

Changing the voice recorder settings

You can change the recording settings for the recorder.

Before recording a memo, press <Options> and

select Settings to access the following options:

•

Recording time: select a recording time.

Volume: select a volume level.

•

Delete: delete the selected game.

Properties: access the game properties.

Menu functions

Configuring Java settings

Checking memory status

You can configure profile settings for accessing Java

services.

You can view the total amount of memory for the

games as well as the amount of used memory.

1. From the Java world screen, select Settings

From the Java world screen, select Memory status

2. Change the following settings:

FM radio (Menu 3.4)

•

APN: enter the access point name.

Password: enter the password.

Proxy: select whether or not you use a proxy

server to access network services. Depending

on this setting, options in Proxy settings vary.

Proxy settings: provide you with the following

options:

Use this menu to access the FM radio on your phone.

First, you must connect your phone with the headset,

which serves as a radio antenna.

Finding and setting radio channels

1. Press [

] to turn on the radio.

•

2. Press [Left] or [Right] to move to the frequency of

a radio channel.

When the proxy is set to Enable

The frequency moves by 0.1 MHz increments.

IP address: enter the HTTP proxy IP address.

Otherwise, press and hold [Left] or [Right] to

automatically scan through and save available

radio frequencies.

Port: enter the proxy port number.

When the proxy is set to Disable

3. Press <Options> and select Add

DNS1: enter the primary address.

4. Enter a name for the channel and press [

DNS2: enter the secondary address.

5. Select the channel number to be assigned to the

frequency.

•

Self-tuning: let the phone automatically scan

through and save available radio frequencies.

Remove: remove the selected channel or all

channels.

Listening to the radio

1. From the FM radio screen, scroll to a radio channel.

Pop-up alert: set the phone to alert you to listen

to the radio at a specific time. When the pop-up

notification appears on the screen, press <Listen

2. Press [

Press [

] to turn on the radio.

] to adjust the volume.

• You can answer an incoming call or use other

phone functions while listening to the radio.

• The quality of the radio broadcast depends on

the radio station’s coverage in that particular

area.

to turn on the specified radio channel.

•

Speaker on/Earphone on: change the audio

mode to the phone’s speaker or headset.

Settings: select the radio volume.

Listening to the radio with the phone closed

3. To turn off the radio, press [

Using radio options

1. Press and hold [

the radio.

] and then [

] to access

On the FM radio screen, press <Options> to access

the following radio options:

2. Select a channel or frequency by pressing [

] and press [ ] to turn on the radio.

Press [ ] to adjust the volume.

3. Press and hold [ ] to turn off the radio.

] or

[

•

FM radio on/FM radio off: turn the radio on or

off.

Add: add a radio channel. You can store up to 30

channels.

Edit: edit the name or frequency for the channel.

Menu functions

World time (Menu 3.5)

Alarm (Menu 3.6)

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Use this menu to set alarms. The alert type for a

normal alarm corresponds to the call alert type

settings. A wake-up alarm is not affected by your

sound settings.

Setting your local time zone

1. From the world map, press [Left] or [Right] to

scroll to the city you want. As the time line moves,

the time and date of the given zone display.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

2. Press [

zone.

] to save the city as your local time

•

Alarm: activate the alarm.

Alarm time: enter the time for the alarm to

ring.

Viewing and setting a foreign time zone

1. From the world map, press [Down].

•

AM/PM: set AM or PM in 12-hour format.

Alarm day: select the days you want.

Alarm tone: select an alarm tone.

2. Press [Left] or [Right] to select the foreign time

zone you want.

3. Press [

] to save the time zone.

3. Press <Save>.

Applying daylight savings time

1. From the world map, press <Options> and select

Stopping an alarm

•

For a non-wake-up alarm, press any key.

Set daylight saving time

2. Press [ ] to select the time zones you want.

3. Press <Save>.

For a wake-up alarm, press <OK> or [

Press any key, except <OK> and [

], to cause

it to sound again after 5 minutes. You can do this a

maximum of 5 times.

Setting the alarm to ring even if the phone is

off

Convertor (Menu 3.8)

Use this menu for common conversions, such as

currency and temperature.

From the Alarm screen, select Auto power

→

On.

If the phone is off when it is time for the alarm to ring,

the phone switches on and sounds the alarm.

Performing a conversion

1. Select a convertor.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Calculator (Menu 3.7)

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

3. Enter the value to be converted and press [Down].

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-).

1. Enter the first number.

•

Press <.()> to insert a decimal point or

bracket.

4. Press [Left] or [Right] to select the unit to which

you want to convert.

•

Press

[

] or [

]

to move the cursor.

The equivalent value for the amount you entered

displays.

2. Press one of the Navigation keys to access the

math function you want.

Using convertor options

3. Enter the second number.

4. Press [

] to view the result.

Press <Options> to access the following options:

5. If necessary, repeat from step 2 to continue the

calculation.

•

Clear: clear the current values.

Reverse: reverse the conversion.

Currency rates: edit the currency rate list.

Menu functions

Timer (Menu 3.9)

SIM AT (Menu 3.11)

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

This menu is available if you use a SIM AT card that

supports SIM Application Tool kit menus and provides

additional services, such as news, weather, sports,

entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Starting the timer

1. Press <Set>.

2. Enter the length of time you want to count down

and press <OK>.

3. Press [

] to start counting down.

Browser (Menu 4)

Stopping the timer

The Wireless Application Protocol (WAP) browser on

your phone allows you to access the wireless web.

From the wireless web, you can access up-to-date

information and a wide variety of media content, such

as games, wallpapers, ringtones, and music files.

•

Press any key when the timer rings.

Press [

] on the Timer screen to stop the timer

before it rings.

Stopwatch (Menu 3.10)

To access this menu, press <Menu> in Idle mode and

Use this menu to measure elapsed time. The

maximum time is 10 hours.

select Browser

1. Press [

] to start the stopwatch.

2. Press [

] to check an interval. You can repeat

this step for a total of 4 intervals.

•

Reload: reload the current page with updated

information.

Home (Menu 4.1)

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider. You can also press [

Show URL: display the URL address of the current

web page. You can also set the current page as the

homepage for the web browser.

] in Idle mode.

Navigating the web browser

•

About...: access version and copyright information

about the browser.

Press

[Up] or [Down].

Using web page options

scroll through browser

items

From any web page, press [ ] to access the following

options:

select a browser item

[

] or <

•

Go to URL: enter a URL address manually.

return to the previous

page

Back> or [C

Bookmarks: switch to the Bookmarks menu.

ꢀp. 46

return to the homepage

and hold [C].

•

Messages: check the messages stored in the My

Messages folder. You can also create and send a

Using browser menu options

Press [ ] or select on the top of screen.

Back: go back to the previous page.

new SMS message.

File manager: switch to the File manager

menu. p. 62

ꢀp. 48

ꢀ

•

Home: return to the homepage.

Exiting the browser

Exit: exit the web browser.

Press [ ] to end the network connection and exit the

browser.

Menu functions

Bookmarks (Menu 4.2)

Go to URL (Menu 4.3)

Use this menu to save URL addresses in order to

quickly access web pages.

Use this menu to manually enter a URL address and

access the associated web page.

Adding a bookmark

1. Select an empty location.

Clear cache (Menu 4.4)

Use this menu to clear information stored in the cache,

which is the temporary memory that stores the web

pages you have recently accessed.

2. Enter a title for the bookmark and press [Down].

3. Enter a URL address and press [

Accessing a bookmarked page

Profile settings (Menu 4.5)

Selecting a bookmark item launches the web browser

and accesses the associated web page.

Use this menu to set up servers for the web browser.

Contact your service provider for details about your

setting options.

Using bookmark options

After saving an item, press <Options> to access the

following options:

For each server, the following options are available:

•

Profile name: assign a name to the server profile.

•

Go: access the bookmarked web page.

Home URL: set the address of your homepage.

Edit: edit the URL address and title of the

bookmark.

Bearer: select a bearer for each type of network

address accessed.

•

Delete: delete the selected bookmark.

•

Proxy: select whether or not the phone uses a

proxy server to launch the web browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

•

GSM settings: customise the following GSM

network settings:

When the proxy is set to Enable

Proxy IP: enter the proxy IP address.

Proxy port: enter the proxy port number.

Dial number: enter the PPP server phone number.

GPRS settings: customise the following GPRS

network settings:

When the proxy is set to Enable

Password: enter the password.

Proxy IP: enter the proxy IP address.

Data call type: select a data call type.

Proxy port: enter the proxy port number.

When the proxy is set to Disable

APN: enter the access point name of the GPRS

DNS1: enter the primary address.

DNS2: enter the secondary address.

Dial number: enter the PPP server phone number.

network gateway.

Password: enter the password.

When the proxy is set to Disable

Password: enter the password.

DNS1: enter the primary address.

Data call type: select a data call type.

DNS2: enter the secondary address

APN: enter the access point name of the GPRS

network gateway.

Current profile (Menu 4.6)

Use this menu to select a connection profile for

accessing the web browser.

Password: enter the password

Menu functions

2. Press <Options> to access the following options

Messages (Menu 5)

for creating a message:

Use the Messages menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use push message and cell broadcast

message features.

•

Insert: add a template, Phonebook entry, or

bookmark to text.

•

Add picture/Add animation/Add melody:

attach a simple image, animated image, or

melody.

To access this menu, press <Menu> in Idle mode and

select Messages

•

Attach: attach a Phonebook entry as a name

card or calender data as a data format

attachment.

Create new message (Menu 5.1)

Use this menu to create and send messages.

Text message (Menu 5.1.1)

Text style: change the text attributes.

3. When you have finished, press <Options> and

select Save and send or Send only

Short Message Service (SMS) allows you to send or

receive text messages that may include simple

pictures, animated images, and melodies.

4. Enter a destination number.

To send the message to more than one recipient,

fill in additional destination fields.

1. Enter your message.

5. Press [

] to send the message.

The maximum number of characters allowed in a

message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

•

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

Delete page: delete an added page.

Edit page: change the duration of page display

or move the page forward among the other

pages.

Attach: attach a Phonebook entry as a name

card or calender data as a data format

attachment.

Multimedia message (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

1. Select the Subject line.

2. Enter the message subject and press [

3. Select the Picture & Video or Sound line and add

•

an image, a video, or a sound file.

• The maximum size allowed for a message can

differ, depending on your service provider.

• Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

Remove subject/Remove media/Remove

sound/Remove message: remove an added

item.

7. When you have finished, press <Options> and

select Send

4. Select the Message line.

5. Enter the message text and press [

8. Enter a phone number or e-mail address.

6. Press <Options> to access the following options

To send the message to more than one recipient,

fill in additional destination fields.

for editing the message:

•

Edit: edit the subject or text of your message.

Change image Change video Change

sound: replace an added item.

9. Press [

] to send the message.

Menu functions

6. Press <Options> to access the following options

Email (Menu 5.1.3)

to edit the e-mail:

You can create and send e-mails that include text,

audio, and images. To use this feature, you need to

subscribe to an e-mail service and set up your e-mail

•

Edit: edit the subject or text.

Remove subject Remove message: clear

the subject or text.

account and profile.

ꢀp. 59

•

Remove: delete the selected attachment or all

attachments.

Remove all attachments: delete all

attachments.

1. Select the Subject line.

2. Enter the subject of your e-mail and press [

3. Select the Message line.

4. Enter the e-mail text and press [

7. When you have finished, press <Options> and

select Send

5. Select the File attach line and select one of the

following options to add files:

8. Enter an e-mail address.

•

Add image/Add videos/Add sounds/Add

music: add media files stored in the phone’s

To send the e-mail to more than one recipient, fill

in additional destination fields.

memory.

9. Press [

] to send the e-mail.

Depending on the file type or DRM (Digital

Rights Management) system, some files may

not be able to be forwarded.

•

Other files: add document files stored in the

Other files folder.

Attach: attach name cards or calender data as

data format attachments.

My messages (Menu 5.2)

• Depending on the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Use this menu to access messages you have received,

sent, or which have failed in sending.

• A

icon next to a message means that the

message is of high priority. A grey-coloured

message icon indicates low priority.

Inbox (Menu 5.2.1)

This folder stores all of the messages you have

received, except for e-mails.

Using message options

While viewing a message, press <Options> to access

the following options:

Viewing a message

The following icons may appear on the message list to

show the message type:

SMS messages

•

Reply via: reply to the sender via SMS or MMS.

Forward: forward the message to other people.

Delete: delete the message.

•

SMS or delivery report for your sent messages

MMS

MMS notification ( : Being retrieved,

: Failed to retrieve)

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

•

Push message from web servers.

Configuration message, containing network

parameters from your service provider.

•

Add to block list: add the sender’s number to the

Block list to reject the messages from the sender.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Cut media: save media content from the message

to your phone’s memory.

Menu functions

•

Print via Bluetooth: print the message by

connecting the phone to a printer via Bluetooth.

Configuration messages

•

Install: apply the configuration specified in the

•

Protection: protect the message from being

deleted.

message to your phone.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

MMS messages/MMS notifications

•

Delete: delete the message.

•

Retrieve: retrieve the MMS message from the

MMS server.

Protection: protect the message from being

deleted.

•

Reply via SMS: reply to the sender via SMS.

Reply via MMS to: reply to the sender or all

Push messages

recipients via MMS.

•

Go to URL: connect to the URL specified in the

•

Forward: forward the message to other people.

message.

Delete: delete the message.

•

Delete: delete the message.

Add to block list: add the sender’s number to the

Block list to reject the messages from the sender.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Drafts (Menu 5.2.2)

This folder stores messages you have saved to send at

a later time.

Cut media: save media content from the message

to your phone’s memory.

When you select an SMS or e-mail message, it opens

in Edit mode so that you can edit and/or send the

message.

Properties: access the message properties.

Delivery reports

Delete: delete the report.

•

When you select an MMS message, it opens in Preview

mode as would a message from the Inbox. To edit the

•

Delete: delete the message.

Move to phone Move to SIM: move the

message between the SIM card and the phone’s

memory.

MMS message, press <Options> and select Edit

Outbox (Menu 5.2.3)

•

Protection: protect the message from being

deleted.

This folder stores messages that the phone is

attempting to send or has failed to send.

Print via Bluetooth: print the message by

connecting the phone to a printer via Bluetooth.

The following icons are available to show the message

status:

Properties: access the message properties.

•

SMS message failed to send

MMS message being sent

MMS message failed to send

E-mail being sent

Sentbox (Menu 5.2.4)

This folder stores messages that you have sent.

While viewing a message, press <Options> to access

the following options:

E-mail failed to send

•

Open file: open the attached file.

While viewing a message, press <Options> to access

the following options:

Save file: save the attached file in the phone’s

memory.

•

Open file: open the attached file.

•

Forward: forward the message to other people.

Save file: save the attached file in the phone’s

memory.

Delete: delete the message.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

•

Send again: retry sending the message.

Forward: forward the message to other people.

Menu functions

•

Print via Bluetooth: print the message by

connecting the phone to a printer via Bluetooth.

Press and hold [ / ] to move to the first or last

page in the e-mail.

•

Properties: access the message properties.

5. Press [ ] or [ ] to view the previous or next

e-mail.

Email box (Menu 5.2.5)

Using e-mail options

This folder stores e-mails that you have received.

Viewing an e-mail

While viewing the e-mail or header, press <Options

to access the following options:

1. Select an e-mail account.

•

Retrieve: retrieve the body of the e-mail from the

e-mail server.

2. Press <Select> when Check new mail displays.

The phone checks the e-mail server and downloads

new e-mails.

•

Open file: open the attached file.

Save file: save the attached file in the phone’s

memory.

The following icons may appear on the list to show

the e-mail status:

•

Reply to: send a reply to the sender or to the

sender and all of the other recipients.

•

Retrieved from the server

Being retrieved

Failed to retrieve.

•

Forward: forward the e-mail to other people.

Delete: delete the e-mail.

icon next to a message means that the

Add to block list: add the sender’s e-mail

address or subject to the Block list to reject

e-mails from that address or containing that

subject.

message is of high priority. A grey-coloured

message icon indicates low priority.

3. Select an e-mail or a header.

4. Press [ / ] to view other pages in the

e-mail.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the e-mail.

Creating a template

1. Select an empty location.

2. Enter a message and press [

Using template options

Cut attachment: save the attached files from the

e-mail to your phone’s memory.

Print via Bluetooth: print the e-mail by

connecting the phone to a printer via Bluetooth.

From the template list, press <Options> to access

the following options:

•

Protection: protect the e-mail from being deleted.

•

Edit: edit the selected template.

Properties: access the e-mail properties.

Send message: create and send a new message.

Delete: delete the selected template.

My folder (Menu 5.2.6)

Use this menu to view the messages you have moved

to this folder using the Move to my folder option

while viewing a message list.

MMS template (Menu 5.3.2)

You can access embedded MMS templates or ones you

have saved so that you can use them in composing an

MMS message.

Templates (Menu 5.3)

From the template list, press <Options> to access

the following options:

Use this menu to make and use templates of

frequently used messages.

•

View: open the selected template.

Send message: send the selected message.

Edit: edit the selected template.

Text template (Menu 5.3.1)

You can create SMS templates with the sentences you

use frequently so that you can retrieve and insert

them when composing an SMS, MMS, or e-mail

message.

Add new: add a new template.

Menu functions

•

Delete: delete the selected template or all

templates, except for the embedded ones.

Reply path: allow recipients to reply to you

through your SMS server.

Delivery report: set the network to inform you

when your messages have been delivered.

Delete all (Menu 5.4)

Use this menu to delete messages in each message

folder all at once.

Validity period: set the length of time your

messages are stored in the SMS server.

1. Press [

cleared.

] to select the message folders to be

Message type: set the default message type. The

network can convert the messages into the

selected format.

Pressing the key twice displays the message types

so that you can specify the ones to be cleared.

Service centre: store or change the number of

your SMS server.

2. Press <Delete>.

•

Block number: store the phone numbers from

which you want to reject messages.

3. Press <Yes> to confirm the deletion.

Settings (Menu 5.5)

Multimedia message (Menu 5.5.2)

Use this menu to set up various options for using the

messaging service.

You can configure MMS settings.

•

Send settings: set up the options for sending

MMS messages:

Text message (Menu 5.5.1)

You can configure SMS settings.

Delivery report: set the network to inform you

when your messages have been delivered.

•

Send settings: set up the options for sending

SMS messages:

Address hiding: set your address to be hidden

from the recipient’s phone.

Read reply: send a read-reply request along with

your messages.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming on another network.

Priority: set the priority level of messages.

Reception within home network or abroad has the

following options:

Expiry Date: set the length of time messages are

stored in the MMS server.

Automatic: the phone automatically retrieves

messages from the server.

Delivery after: set a time delay before messages

are sent.

Reject: the phone rejects all messages.

Send size: select a maximum size of attached

items allowed for messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

•

Receive settings: set up the options for receiving

MMS messages:

•

MMS profiles: configure required network

settings for MMS.

Anonymous reject: reject messages from

unknown senders.

Current profile: select a profile.

Advert allowed: accept advertisements.

Profile settings: customise the options for each

profile:

Report allowed: set the network to inform the

sender when a message has been delivered to you.

Profile name: assign a name to the MMS profile.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Server URL: enter the address of your MMS

server.

Proxy: connect to the GPRS network using the

proxy server.

Menu functions

GPRS settings: customise the settings required

for connecting to the GPRS network.

when the proxy is set to Enable

Version: select an available OMA version and

maximum size limit for sending or receiving

messages.

Depending on your service provider, it may not

be possible to support the maximum limit

295KB. In this case, try again after changing

the setting to 100KB.

IP address: enter the gateway address.

Port: enter the port number.

APN: enter the access point name used for the

address of the GPRS network.

•

Block number: set the Block number list to reject

MMS messages from specific phone numbers.

Password: enter the password.

Email (Menu 5.5.3)

when the proxy is set to Disable

You can configure default e-mail settings.

DNS1: enter the primary address.

You cannot change e-mail profile and account

settings while an e-mail is being sent or retrieved.

DNS2: enter the secondary address.

APN: enter the access point name used for the

address of the GPRS network.

•

Send settings: set up the options for sending

e-mails:

Send copy to self: send a copy of your e-mails to

your e-mail account.

Password: enter the password.

Delivery confirm: set the network to inform you

when your e-mails have been delivered.

Read confirm: send a read-reply request along

with e-mails.

Retrieve option: set whether the phone

downloads e-mail headers only or e-mail headers

and bodies both.

Priority: select the priority level of e-mails.

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

Include signature: attach your name, phone

number or a simple memo to your e-mails.

Edit name: edit the name in your signature.

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject

e-mails that exceed the specified size.

Edit telephone number: edit the phone number

in your signature.

Edit note: edit the tag line in your signature.

Leave a copy of messages on the server: leave

copies of e-mails on the e-mail server after

retrieving.

•

Receive settings: set up the options for receiving

e-mails:

Check interval: determine how often the phone

checks the server for incoming e-mails. If you

select Not used, use the Check new mail feature

to receive new e-mails manually.

•

Email account: set up an e-mail account and

select an account to be used.

Current account: select an account.

Account settings: configure e-mail accounts

using different e-mail servers. Set the options for

each account:

Read reply: determine whether or not the phone

sends a read-reply for incoming e-mails. If you

select Announce, the phone asks you to send a

read-reply.

In use: select this option to use the account and

to display the account in the Email box folder.

Menu functions

Account name: enter a name for the currently

selected account.

When the protocol type is IMAP4:

IMAP4 server: enter the IP address or host

User name: enter a user name.

Email address: enter your e-mail address.

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Reply address: enter your e-mil address to be

used when the recipient sends a reply.

Include attachments: select this option to

receive attachments with e-mails.

User ID: enter your e-mail ID.

Max. Emails retrieved: set the number of

headers you will retrieve from the server.

Password: enter your e-mail password.

•

Email profile: select a connection profile to be

used for e-mail services.

SMTP server: enter the IP address or host name

of the outgoing e-mail server.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Current profile: select a profile.

Profile settings: configure up to five e-mail

profiles. For each profile, the options are required

to connect to the GPRS network:

When the protocol type is POP3

POP3 server: enter the IP address or host name

of the server that receives your e-mail.

Profile name: enter a name for the e-mail

profile.

POP3 port: enter the POP3 port number.

APN: enter the access point name used for the

GPRS network address.

APOP login: connect to the server by using the

APOP login scheme.

•

Message sending: activate or deactivate the SOS

message feature. To send an SOS message, press

[ / ] 4 times in Idle mode, with the phone closed.

Password: enter the password.

DNS1: enter the primary address.

DNS2: enter the secondary address.

While the phone is attempting to send an SOS

message, the ( ) icon turns red and you

cannot access menu functions. When the icon

turns blue, use the phone as normal.

•

Block list: specify e-mail addresses or subjects

you want to reject.

Push message (Menu 5.5.4)

•

Recipients: specify the phone numbers to which

you want to send SOS messages.

You can change the settings for receiving push

messages from the wireless web server.

Repeat sending: set the number of times the

phone repeats sending SOS messages.

•

Receive: set how your phone receives push

messages.

Incoming SOS alert: set whether or not the

phone uses the preset alert type (siren and alert

message) for incoming SOS messages. If you

select No, the phone uses the message ringer

setting.

•

Service centre: enter the address of the server

from which you want to receive push messages.

SOS message (Menu 5.6)

•

Text: check the preset SOS message text.

In an emergency, you can send SOS messages to your

family or friends for help. You can also receive SOS

messages from other people who are in an emergency.

Use this menu to specify options for sending and

receiving SOS messages.

You can view the onscreen help by pressing

<Options> and selecting Help.

Menu functions

Broadcast messages (Menu 5.7)

Memory status (Menu 5.8)

The Cell Broadcast service delivers short messages on

various topics, such as weather, sports, or traffic.

Use this menu to view the amount of memory

currently in use in each folder.

Use this menu to change the settings for the service

and to access broadcast messages.

File manager (Menu 6)

•

Read: open received messages.

The File manager menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

The Temporary box saves network messages until

the phone is switched off.

The Archive box saves network messages

indefinitely. Press <Options> and select Save to

save messages to the Archive box when a text

notification appears.

To access this menu, press <Menu> in Idle mode and

select File manager

As a result of the Digital Rights Management (DRM)

system, some of the media items you download from

the Internet or receive by MMS may require a license

key to access them.

•

Receive: enable or disable the reception of

broadcast messages.

Channel: specify the channels from which you

receive broadcast messages.

Images (Menu 6.1)

When you select Respective channels, you can

set up a list of active CB channels.

This menu displays photos you have taken and images

you have downloaded, received in messages, or

imported from your computer.

•

Language: select the language(s) in which

broadcast messages display.

Viewing an image

1. Select an image folder.

Please contact your service provider for details.

2. Select an image.

•

Rename: change the file name.

Move to favourite images/Move to: move the

file to another folder.

Viewing a slide show

You can view your photos as a slide show, a sequential

presentation of each photo in the current folder.

•

Share for Bluetooth: share the file or all files

with other Bluetooth devices.

1. Select Photos

Print via Bluetooth: print the image by

connecting the phone to a printer via Bluetooth.

2. Press <Options> and select Slide show

3. Select an interval option.

•

Protection: protect the file from being deleted.

The slide show begins.

Properties: access the file properties.

4. Press <Cancel> to stop the slide show.

Videos (Menu 6.2)

Using image options

This menu displays video clips you have recorded,

downloaded, received in messages, or imported from

your computer.

While viewing an image, press <Options> to access

the following options:

•

List: return to the image list.

Video clips recorded on other devices, such as

camcorders, may not play correctly.

Send via: send the file via MMS, e-mail, or

Bluetooth.

•

Set as: set the image as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

Playing a video clip

1. Select a video folder.

2. Select a video clip.

Edit: decorate the photo by adding emoticons or

applying a frame or special effect.

Delete: delete the file.

Menu functions

During playback, use the following keys:

•

Share for Bluetooth: share the file with other

Bluetooth devices.

Key

Function

•

Protection: protect the file from being deleted.

Pauses or resumes playback.

Moves backward in a file.

Skips forward in a file.

Adjusts the volume.

Stops playback.

Properties: access the file properties.

Left

Right

Music (Menu 6.3)

This menu displays MP3 files you have downloaded or

imported from your computer.

Select a file. The MP3 player opens.

ꢀp. 37

Down

Sounds (Menu 6.4)

Using video options

This menu displays voice memos you have recorded,

and sound files you have downloaded, received in

messages, or imported from your computer.

From a video screen, press < > to access the

following options:

•

Play: play the file.

Playing a sound clip

1. Select a sound folder.

Send via: send the file via MMS, e-mail, or

Bluetooth.

2. Select a sound clip. For a voice memo, see Voice

•

Delete: delete the file.

recorder

ꢀp. 39

Rename: change the file name.

Move to favourite videos/Move to: move the

file to another folder.

Using sound options

Other files (Menu 6.5)

From a sound screen, press <Options> to access the

following options:

Files that you have received but which are not

supported by your phone are stored in this folder. You

cannot open these files on the phone. Unsupported file

formats include *.doc, *.ppt, and *.txt.

•

List: return to the sound list.

Send via: send the file via MMS, e-mail, or

Bluetooth.

Memory status (Menu 6.6)

•

Set as: set the sound as your call ringtone, a

ringtone for a Phonebook entry, or alarm melody.

Use this menu to view memory information for media

items in the phone’s memory.

•

Delete: delete the file.

Rename: change the file name.

Calendar (Menu 7)

The Calendar menu enables you to keep track of your

schedule.

Move to favourite sounds/Move to

downloaded sounds: move the file to another

folder.

•

Share for Bluetooth: share the file with other

Bluetooth devices.

To access this menu, press <Menu> in Idle mode and

select Calendar

•

Protection: protect the file from being deleted.

Consulting the calendar

Properties: access the file properties.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

blue box.

Menu functions

Selecting a day

Creating an event

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

You can store scheduled events, anniversaries,

miscellaneous events, and To do items on the

calendar. More than one event per day can be stored.

Press [

] to move by month.

Entering a new scheduled event

1. Select a date on the calendar.

Using calendar options

Press <Options> to access the following options:

2. Press <Options> and select Create

or Miscellaneous

3. Enter information or change the settings:

→

Schedule

•

View mode: change the view mode of the

calendar. p. 68

Create: add a new event.

ꢀ

•

ꢀnext section

•

Subject: enter a title for the event.

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

Go to: select today’s date or enter a specific date.

Sort by: sort items by type of event.

Delete: delete the items stored on the calendar by

using various deleting options.

•

AM/PM: select AM or PM in 12-hour time

format.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM in 12-hour time

format.

Location: (for Schedule) enter information

about the event location.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: access memory information for

the event items stored on the calendar.

•

Alarm: set an alarm for the event.

before: set how long before the event the

alarm is to alert you.

Alarm tone: select an alarm tone.

Repeat: (for Schedule) set the event to recur

and select a repeat unit.

•

Alarm time: enter the time for the alarm to

ring.

AM/PM: select AM or PM in 12-hour time

format.

Alarm tone: select an alarm tone.

Repeat every year: set the phone to remind

you of the anniversary every year.

•

until: (for Schedule) set the ending date, if

the event will recur.

4. Press <Save> to save the event.

Entering a To do item

Entering a new anniversary

1. Select a date on the calendar.

2. Press <Options> and select Create

1. Select a date on the calendar.

2. Press <Options> and select Create

→

To do.

→

3. Enter information or change the settings:

Anniversary

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

3. Enter information or change the settings:

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

4. Press <Save> to save the event.

•

before: set how long before the event the

alarm is to alert you.

Menu functions

•

View mode: change the view mode of the

calendar.

Viewing an event

Once you have scheduled events, the event icons and

the number of events for a specific day appears at the

bottom of the calendar.

Done/Undone: change the status of the to-do

item.

•

Delete: delete the event.

•

Scheduled event

To do item

•

Anniversary

Print via Bluetooth: print the event by

connecting the phone to a printer via Bluetooth.

Miscellaneous event

Accessing an event

1. Select a date on the calendar to display the events

for the day.

Viewing an event in a different mode

You can change the calendar display to Day view or

Week view. Press <Options> and select View mode

2. Select an event to view its details.

→

a view mode.

3. Press [Left] or [Right] to access the other events

scheduled for the selected day.

Day view

You can view events for the selected date. Select an

event to view its details.

Using event options

While viewing an event, press <Options> to access

the following options:

The following icons may display to indicate the event

status:

•

Edit: edit the event.

•

Alarm set

Create: add a new event.

Recurring event

Send via: send the event via SMS, MMS, e-mail,

or Bluetooth.

To do item priority (Red: high, Blue: normal,

Grey: low)

•

Completed To do item

Week view

Taking a photo

You can view events for the selected week. A cell on

the timetable indicates the presence of a schedule

item. Select a cell in the day you want.

You can take photos in various modes. The camera

produces JPEG photos.

When you take a photo in direct sunlight or in bright

conditions, shadows may appear on the photo.

Camera (Menu 8)

You can use the camera module embedded in your

phone to take photos and record videos.

Taking a photo with the phone open

1. Access the Camera menu or press and hold [

]

to turn on the camera.

2. Adjust the image to be captured.

To access this menu, press <Menu> in Idle mode and

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 70

3. Press [ to take a photo. The photo is saved in

the Photos folder.

select Camera, or press and hold [

ꢀ

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

• Do not take photos in a place where you may

interfere with another person’s privacy.

•

ꢀ

]

4. To

Press

Options>.ꢀp. 71

access photo options

delete the photo

[C] and then <Yes>.

return to Capture mode

<Back>.

Menu functions

Quality: select an image quality setting.

View finder: select a preview screen.

Using camera options in Capture mode

In Capture mode, press < > to access the following

options:

Shutter sound: select the sound that you hear

when you press the shutter release, [

•

Record video: switch to Record mode.

Zoom sound: turn the sound effect for zooming

on or off.

Shooting mode: take a photo in the following

modes:

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Single shot: take a photo in normal mode. You

can select whether or not the camera automatically

saves a photo.

Default name: change the default prefix of the

photo name.

Multi shot: take a series of action stills. You can

select the number of photos the camera will take

and the shooting speed.

•

Camera short cuts: view the functions of the

keys you can use in Capture mode.

•

Effects: change the colour tone or apply a special

effect.

Using the keypad in Capture mode

You can use the keypad to customise your camera

settings in Capture mode.

•

Frames: apply a decorative frame.

Timer: set a time delay before the camera takes a

photo.

Key

Function

•

Go to photos: access the Photos folder.

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Settings: change the default settings for taking a

photo.

Flips the image vertically.

Size: select an image size.

•

Send via: send the file via MMS, e-mail, or

Bluetooth.

Key

Function

Shows the mirror image.

Switches to Record mode.

Changes the image size.

Set as: set the photo as wallpaper for the displays

or as a caller ID image for a Phonebook entry.

ꢀp. 72

•

Delete: delete the file.

Multi shot delete all: delete one of the

multi-shot photos.

Changes the image quality.

Changes the shooting mode.

•

Rename: change the file name.

Go to photos: access the Photos folder.

ꢀp. 62

Changes the colour tone or applies a

special effect.

Share for Bluetooth: share the selected file or all

files with other Bluetooth devices.

Selects a decorative frame.

Sets the timer.

•

Print via Bluetooth: print the image by

connecting the phone to a printer via Bluetooth.

•

Protection: protect the file from being deleted.

Goes to the Photos folder.

Changes the preview screen.

Properties: access the file properties.

Taking a photo with the phone closed

1. Press and hold [

2. If necessary, press [

Using photo options

After saving a photo, press <Options> to access the

following options:

] to highlight

•

Take another: return to Capture mode.

Menu functions

4. Press [

]

or < > to stop recording. The video is

3. To

Press

automatically saved in the Videos folder.

flip the image vertically

show the mirror image

adjust the brightness

zoom in or out

[

5. To Press

play back the video clip

access video options

delete the video clip

return to Record mode

[

ꢀ

p. 74

[C] and then <Yes>.

4. Press [

]

to take a photo. The photo is

automatically saved.

Using camera options in Record mode

Recording a video

In Record mode, press < > to access the following

options:

You can record a video of what is displayed on the

camera screen and save it.

•

Take a photo: switch to Capture mode.

Recording a video with the phone open

Effects: change the colour tone or apply a special

effect.

1. In Capture mode, press [

1].

2. Adjust the image to be captured.

•

Timer: set a time delay before the camera starts

recording.

•

Press < > to access camera options.

next section

Use the keypad to change the camera settings

or switch to other modes. p. 73

3. Press [ to start recording.

ꢀ

•

Go to videos: access the Videos folder.

•

Settings: change the following settings for

recording a video:

ꢀ

]

Recording mode: select a video recording mode.

Using the keypad in Record mode

Select Limit of MMS to record a video suitable for

messaging.

You can use the keypad to customise your camera

settings in Record mode:

Select Normal to record a video within the limit of

the currently available memory.

Key

Function

Left/Right

Up/Down

Adjusts the image brightness.

Zooms in or out.

Size: select a file size.

Quality: select an image quality setting.

Audio rec.: record audio with a video clip.

Flips the image vertically.

Shows the mirror image.

Zoom sound: turn the sound effect for zooming

on or off.

Switches to Capture mode.ꢀp. 69

Brightness sound: turn the sound effect for

brightness adjustment on or off.

Changes the file size.

Default name: change the default prefix of the

video name.

Changes the image quality.

Changes the video recording mode.

•

Camcorder short cuts: view the functions of the

keys you can use in Record mode.

Changes the colour tone or applies a

special effect.

Mutes or unmutes audio.

Sets the timer.

Goes to the Videos folder.

Menu functions

Using video options

3. To

zoom in or out

Press

After saving a video clip, press < > to access the

following options:

[

4. Press [

5. Press [

]

to start recording.

to stop recording. The video clip is

•

Record another: return to Record mode.

Send via: send the file via MMS, e-mail, or

Bluetooth.

automatically saved.

•

Delete : delete the video clip

Rename: change the file name.

Go to videos: access the Videos folder.

ꢀp. 63

Settings (Menu 9)

Share for Bluetooth : share the file with other

The Settings menu provides you with various setting

options to customise the phone to your preferences

and needs. You can also reset the settings to their

default status.

Bluetooth devices

•

Protection: protect the file from being deleted.

Properties: access the file properties.

Recording a video with the phone closed

1. Press and hold [

To access this menu, press <Menu> in Idle mode and

select Settings

2. If necessary, press [

] to highlight

Time & Date (Menu 9.1)

3. To

Press

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

flip the image vertically

show the mirror image

adjust the brightness

[

ꢀp. 42

•

Time: enter the current time.

Greeting message (Menu 9.2.2)

Home zone: press [

] and set the home time

Use this menu to enter the greeting that is displayed

briefly when the phone is switched on.

zone. Select the city that corresponds to your

home zone. To set the daylight saving time, select

Set daylight saving time.

Short cut (Menu 9.2.3)

You can use the Navigation keys as shortcuts to access

specific menus directly from Idle mode. Use this menu

to assign a shortcut to a key.

•

AM/PM: select AM or PM in 12-hour time format.

Time format: select the time format.

Set date: enter the current date.

Assigning a shortcut menu

Date format: select the date format.

1. Select a key to be used as a shortcut key.

2. Select the menu to be assigned to the key.

Using shortcut options

Week start day: set which day of the week the

calendar starts with.

•

Auto update: select to apply daylight savings

time to the current time, if Set daylight saving

time in Home zone is selected.

Press <Options> to access the following options:

•

Change: assign or change a shortcut menu.

Remove: deactivate the shortcut assignment to

the selected key.

Phone settings (Menu 9.2)

Many different features of your phone’s system can be

customised to suit your preferences.

•

Remove all: deactivate all shortcut assignments.

Advanced shortcut (Menu 9.2.4)

Language (Menu 9.2.1)

Use this menu to activate the Advanced shortcut

feature. You can quickly access the alarm, calendar,

and calculator applications from the dialling screen.

Use this menu to select one of several languages for

the display text.

Menu functions

Activating the Advanced shortcut feature

Volume key (Menu 9.2.5)

1. On the Advanced screen, select On

Use this menu to set whether the phone mutes the call

ringer or rejects a call if you press and hold [

when a call comes in.

]

2. Press <Save>.

Using the Advanced shortcut feature

Extra settings (Menu 9.2.6)

1. For an alarm or scheduled event, enter the time or

the date you want as 4-digit in Idle mode.

You can turn the automatic redialling or answering

feature on or off, and lock the external keys.

For the calculator, enter the first number you want

to use.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

2. Press one of the Navigation keys.

You can access the following applications:

•

Anykey answer: answer an incoming call by

pressing any key, except [ ] or <Reject>.

Key

Application

Alarm p. 42

Convertor

Messages

Calendar

Voice clarity: remove extraneous noise and

increase call quality so that the person with whom

you are speaking can hear you clearly even if you

are in a noisy place.

ꢀ

Down

Left

ꢀ

p. 43

ꢀp. 48

•

Active folder: answer an incoming call by opening

the phone.

Right

ꢀ

p. 66

Cover keylock: lock the exposed keys to keep

accidental presses from affecting your phone’s

operation when the phone is closed.

Dialling display (Menu 9.3.3)

Display settings (Menu 9.3)

Use this menu to select a font size of colour, or

background colour for the numbers entered while

dialling.

Use this menu to change settings for the display.

Wallpaper (Menu 9.3.1)

You can set up the idle screen on both displays.

Calendar (Menu 9.3.4)

•

Main display: select an image to be displayed on

the main display.

Use this menu to display the calendar of the current

month on the idle screen.

•

Cover display: change the settings for the

external display:

Skin (Menu 9.3.5)

You can select a skin colour pattern for Menu mode.

Clock: select a clock type.

Cover title: set a message to be displayed on the

external display.

LCD brightness (Menu 9.3.6)

You can adjust the brightness of the display for

varying lighting conditions.

Wallpaper images: change the wallpaper image

for the external display.

Show caller information (Menu 9.3.7)

Text display (Menu 9.3.2)

Use this menu to set the phone to display missed call

notifications with the most recently missed caller’s

information. To set the external display to show caller

Use this menu to change the display settings for the

text displayed on the idle screen.

•

Text position: select a text position. If you don’t

want to display text in Idle mode, select Off

information, select With cover display

•

Text style: select a font style.

Text colour: select a font colour.

Menu functions

•

Tone: select one of several message tones.

Sound settings (Menu 9.4)

Alert type: specify how you are to be informed

when a message comes in.

Use this menu to customise various sound settings.

Incoming call (Menu 9.4.1)

•

Repetition: specify how often the phone informs

you of a new message.

Use this menu to change the sound settings for

incoming calls.

Power on/off (Menu 9.4.4)

•

Alert type: specify how you are to be informed of

incoming calls.

Use this menu to select the melody that the phone

sounds when it is switched on or off.

•

Ring tone: select a ringtone to be used for the call

ringer.

Folder tone (Menu 9.4.5)

•

Volume: select a ringtone volume.

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Keypad tone (Menu 9.4.2)

Quiet mode (Menu 9.4.6)

Use this menu to select the tone that the phone

sounds when you press a key.

Use this menu to set how the phone acts to alert you

to a specific event while in Quiet mode.

You can adjust the keypad tone volume using

[

] in Idle mode.

Extra tones (Menu 9.4.7)

Message tone (Menu 9.4.3)

Use this menu to customise additional tones for the

phone.

Use this menu to change the sound settings for

incoming SMS messages, MMS messages, e-mails,

and CB messages.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

Connection tone: set the phone to beep when an

outgoing call connects to the system.

•

Show cover indicators: set whether or not the

icons are shown on the external display after the

display turns off.

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Keypad light (Menu 9.5.2)

You can set how the phone controls the use of the

keypad light.

•

Indicative tones: set the phone to beep when

you have made a mistake or something wrong

happens on the phone.

•

Use at any time: the keypad light is always used.

Use at night time: the keypad light is used only

between 5:00 PM and 9:00 AM.

Light settings (Menu 9.5)

•

Use at custom time: specify the time period that

the keypad light is used.

Use this menu to change settings for the backlight.

Backlight (Menu 9.5.1)

Network services (Menu 9.6)

You can change the settings for backlight or icons for

the external display.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Main LCD on: select the length of time the

backlight stays on.

•

Main LCD dim: select the length of time the

display stays on in Dim mode after the backlight

turns off. After a specified time, the display turns

off.

Call diverting (Menu 9.6.1)

This network service reroutes incoming calls to a

phone number that you specify.

Menu functions

1. Select a call diverting option:

Call barring (Menu 9.6.2)

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

No reply: divert calls when you do not answer

the phone.

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

Cancel all: cancel all call diverting options.

This network service allows you to restrict your calls.

1. Select a call barring option:

•

All outgoing: prohibit all outgoing calls.

International: prohibit international calls.

International except home: only allow calls

to numbers within the current country when

you are abroad, and to your home country.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

•

2. Select the type of calls to be diverted.

3. Select Activate. To deactivate call diverting, select

Deactivate

•

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted.

6. If you selected No reply, move to the Seconds

(sec) line and select the length of time the network

delays before diverting a call.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

7. Press <Select>.

Deactivate

4. Enter the call barring password supplied by your

service provider and press <Select>.

Call waiting (Menu 9.6.3)

Voice mail server (Menu 9.6.6)

This network service informs you when someone is

trying to reach you while you are on another call.

Use this menu to store the number of the voicemail

server and access your voicemails.

1. Select the type of calls to which call waiting option

will apply.

You must store the voicemail server number before

accessing the server. Your service provider can give

you the number.

2. Select Activate and press <Select>. To

deactivate call waiting, select Deactivate

•

Connect to voice mail: connect to the voicemail

server to listen to your messages.

Network selection (Menu 9.6.4)

Voice server number: enter the voicemail server

number.

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area. You can select a

network other than your home network only if there is

a valid roaming agreement between the two.

Band selection (Menu 9.6.7)

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

GSM 1900 and Combined GSM 900/1800.

Caller ID (Menu 9.6.5)

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. If you select Default, the phone

will use the default setting provided by the network.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

Some networks may not allow you to change this

setting.

Menu functions

•

My devices: search for connectable Bluetooth

devices.

Bluetooth (Menu 9.7)

Using the Bluetooth feature, you can connect the

phone wirelessly to other Bluetooth devices and

exchange data with them, talk hands-free, or control

the phone remotely.

My phone’s visibility: allow other Bluetooth

devices to search for your phone.

My phone’s name: assign a Bluetooth device

name to your phone, which is then displayed on

other devices.

Bluetooth technology allows free wireless connections

between all Bluetooth-compliant devices within a

range of 10 meters. Since the devices communicate

using radio waves, they do not need to be in line of

sight to each other.

•

Secure mode: determine if the phone asks for

your confirmation when other devices access your

data.

Bluetooth services: display available Bluetooth

services.

• If there are obstacles between the devices, the

operating distance may be reduced.

• It is recommended that you don’t use the

Bluetooth feature while using multimedia features,

such as voice recorder, camera, and MP3 player,

or vice versa, for better performance.

• Some devices may not be compatible with your

phone.

Searching for and pairing with a Bluetooth

device

1. From the Bluetooth setting options, select My

devices

2. Select Search new device

After searching, a list of devices to which you can

connect displays. The following icons indicate the

type of device:

Setting up the Bluetooth feature

The Bluetooth menu provides the following options:

•

Activation: activate or deactivate the Bluetooth

feature.

•

Connect: connect to a headset or hands-free car

kit.

•

Computer

Printer

PDA

•

Mobile phone

Unknown device

Disconnect: end the connection with the

connected device.

Headset/Hands-free car kit

The colour of the icon indicates the status of the

the device:

Browse files: search for data from the device and

import data directly to your phone.

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently connected to

your phone

Service list: access the Bluetooth service list of

the device.

•

Rename: rename the paired device.

Authorize device/Unauthorize device:

3. Select a device.

determine whether or not the phone asks you to

permit connection when other devices try to

connect to your phone.

4. Enter a Bluetooth PIN and press <OK>. This code

is used just once and you don’t need to memorise

it.

•

Delete: remove the selected device or all devices

from the list.

When the owner of the other device enters the

same code, pairing is complete.

Sending data via Bluetooth

1. Activate the Bluetooth feature.

Some devices, especially headsets or hands-free car

kits, may have a fixed Bluetooth PIN, such as 0000

If the other device has a code, you must enter it.

2. Select the application in which the item you want

to send is stored.

Using device options

3. Scroll to the item you want and press <Options>.

From the device list, press <Options> to access the

following options:

4. Select Send via

→

Bluetooth.

Menu functions

The phone searches for devices within range and

displays a list of available devices.

PIN check (Menu 9.8.1)

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

5. Select a device.

6. If necessary, enter the Bluetooth PIN needed for

pairing and press <OK>.

Change PIN (Menu 9.8.2)

Receiving data via Bluetooth

Use this menu to change your PIN. The PIN check

feature must be enabled to change the PIN.

To receive data via Bluetooth, your phone’s Bluetooth

feature must be active.

If an unauthorised Bluetooth device sends data to your

phone, the phone displays a confirmation message. To

receive data, press <Yes>.

Phone lock (Menu 9.8.3)

Use this menu to lock the phone from unauthorised

use.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

Security (Menu 9.8)

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

The password is preset to 00000000. To change the

password, use the Change password menu.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

service provider.

Change password (Menu 9.8.4)

Use this menu to change your phone password.

Privacy (Menu 9.8.5)

Memory status (Menu 9.9)

Use this menu to lock access to messages, files, or all

menu functions on the phone, except for call

functions.

Use this menu to check the amount of memory being

used for storing data in Messages

File manager

Calendar Phonebook, and JAVA world. You can

also check the shared memory for MMS, Email, and

File manager.

When a privacy option is enabled, you must enter the

phone password to access the locked items or

functions.

Reset settings (Menu 9.10)

SIM lock (Menu 9.8.6)

Use this menu to reset the phone’s settings you have

changed.

This menu allows your phone to work only with the

current SIM by assigning a SIM lock code. You must

enter the SIM lock code to use a different SIM card.

1. Press [

reset.

] to select the setting categories to be

FDN mode (Menu 9.8.7)

2. Press <Reset>.

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

change this password.ꢀp. 84

Change PIN2 (Menu 9.8.8)

If supported by your SIM card, use this menu to

change your current PIN2.

“Enter PUK”

The PIN has been entered incorrectly three times

Solve problems

•

in succession, and the SIM card is now blocked.

Enter the PUK supplied by your service provider.

Help and personal needs

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

“No service,” “Network failure,” or “Not done”

displays

When you switch on your phone, the following

messages may appear:

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

“Insert SIM”

•

Be sure that the SIM card is correctly installed.

“Enter password”

You have entered a number but it was not dialled

•

The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

•

Be sure that you have pressed [

Be sure you have accessed the right cellular

network.

“Enter PIN”

•

Be sure that you have not set an outgoing call

barring option.

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

Your correspondent cannot reach you

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

•

Be sure that you are accessing the correct cellular

network.

No number is dialled when you re-call a

Phonebook entry

Be sure that you have not set an incoming call

barring option.

•

Use the Contacts list menu to ensure the number

has been stored correctly.

•

Re-store the number, if necessary.

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

The battery doesn’t charge properly or the phone

sometimes turns itself off

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

If the above guidelines do not help you to solve

the problem, take note of:

The phone starts beeping and “Low battery”

flashes on the display

•

The model and serial numbers of your phone

Your warranty details

•

Your battery is insufficiently charged. Recharge the

battery.

A clear description of the problem

The audio quality of the call is poor

Then contact your local dealer or Samsung after-sales

service.

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

(

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Health and safety information

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is 2.0 W/

kg.¹

1 The SAR limit for mobile phones used by the public is 2.0 watts/

kilogram (W/kg) averaged over ten grams of body tissue. The limit

incorporates a substantial margin of safety to give additional

protection for the public and to account for any variations in

measurements. The SAR values may vary, depending on national

reporting requirements and the network band.

The highest SAR value for this model phone was 1.07 W/

kg.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

temperatures below 0°C (32°F).

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

Health and safety information

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

Electronic devices

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Potentially explosive environments

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

Other medical devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Vehicles

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

•

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

•

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

•

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

3. Press [

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

Care and maintenance

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

inadvertently damage these things or choke on small

parts.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

•

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

If your phone has a flash or light, do not use it too

close to the eyes of people or animals. This may cause

damage to their eyes.

Health and safety information

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

•

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

Index

Browser, web • 44

Characters, enter • 23

Configuration messages • 51

Connection tone • 79

Converter • 43

Creating messages

e-mail • 50

settings • 77

Diverting, calls • 79

DRM (Digital Rights

Management) • 62

DTMF tones, send • 29

ABC mode, text input • 23

Active folder • 76

Alarm • 42

Calculator • 43

Calendar • 65

Call cost • 31

Call log

Answering

call • 27

MMS • 49

SMS • 48

second call • 28

Anykey answer • 76

Auto redial • 76

dialled • 30

missed • 30

received • 31

Call time • 31

Caller ID • 77, 81

Calls

answering • 27

barring • 80

diverting • 79

holding • 28

redialling • 26

rejecting • 27

transferring • 29

waiting • 81

Camera

E-mails

creating/sending • 50

deleting • 54

setting • 58

viewing • 54

Emergency calls • 92

Date, set • 75

Deleting

Background image • 77

Backlight time, set

display • 79

call log • 31

e-mail • 53, 54, 56

events • 68

keypad • 79

FDN (Fixed Dialling Number)

mode • 85

MMS • 52, 53, 56

phonebook • 32, 35

SMS • 51, 53, 56

Dialled calls • 30

Dialling display, set • 77

Display

Band selection • 81

Barring, calls • 80

Battery

File manager • 62

FM radio • 40

Folder tone • 78

charging • 7

low indicator • 8

precautions • 89

Bluetooth

backlight, set • 79

brightness • 77

icons • 10

language • 75

layout • 10

Games • 39

photos • 69

videos • 72

CB (Cell Broadcast) messages •

receiving, data • 84

sending, data • 83

settings • 82

Greeting message • 75

Health and safety • 88

Broadcast messages • 62

Index

Holding, call • 28

SIM card • 85

Low battery indicator • 8

Multiparty-call • 29

Music, downloaded • 64

Phonebook

adding • 33

deleting • 32, 35

finding • 32

managing • 35

options • 32

Icons, description • 10

Images, downloaded • 62

Inbox, messages

e-mail • 54

Memory status

downloaded items • 65

file manager • 65

games 40

messages • 62

phonebook 35

shared memory • 85

Message tone • 78

Messages

Name card • 35

Names

entering • 23

speed dialling • 34

MMS/SMS • 51

International calls • 26

Internet • 44

searching • 32

Network band, select • 81

Network selection • 81

Network services • 79

Photos

taking • 69

viewing • 62

PIN, change • 84

PIN2, change • 85

Power on/off tone • 78

Privacy • 85

Java applications • 39

Outbox, messages • 53

cell broadcast • 62

configuration • 52

e-mail • 50, 54

greeting • 75

MMS • 49, 52

push • 52, 61

SMS • 48, 51

Keypad lock • 76

Keypad tones

selecting • 78

sending/muting • 29

volume • 78

Problems, solve • 86

Push messages • 52, 61

Password

call barring • 80

phone • 84

Phone

Quiet mode

entering • 13

setting • 78

care and maintenance •

display • 10

icons • 10

locking • 84

password • 84

resetting • 85

switching on/off • 8

unpacking • 6

Minute minder • 78

Missed calls • 30

MMS messages

creating/sending • 49

deleting • 52

setting • 56

viewing • 51

MP3 player • 36

Language, select • 75

Last number, redial • 26

Light settings • 79

Locking

Received calls • 31

Received messages

e-mail • 54

cover keypad • 76

menu functions • 85

phone • 84

MMS/SMS • 51

Recording

videos • 72

voice memos • 38

Redialling

Stopwatch • 44

Switching on/off

automatically • 76

manually • 26

microphone • 28

phone • 8

Resetting phone • 85

Ringer

incoming calls • 78

messages • 78

Road safety • 90

Roaming • 81

T9 mode, text input • 24

Templates, message • 55

Text, enter • 23

Time, set • 75

Timer • 44

Safety

Videos

information • 88

precautions • 1

Security, calls • 84

Sent messages • 53

Shortcut • 75

SIM card

playing • 63

recording • 72

Voice recorder

playing • 39

recording • 38

Voicemail server • 81

inserting • 7

locking • 85

Skin colour • 77

SMS messages

creating/sending • 48

deleting • 51

setting • 56

viewing • 51

Sound settings • 78

Sounds, downloaded • 64

Speed dial • 34

Waiting call • 81

Wallpaper • 77

Web browser

access • 44

bookmarks • 46

World time • 42

Zanussi ZCOF636X User Manual
Transcend Information StoreJet TS320GSJ25M R User Manual
Sony MDS NT1 User Manual
Seagate SAVVIO ST9146802SS User Manual
Seagate BARRACUDA ST32000542AS User Manual
Seagate Barracuda ST3250623A User Manual
Pioneer Premier DEH P770MP User Manual
Philips PHOTOFRAME SPF2207 User Manual
Philips AZ7361 User Manual
Numark Industries AXIS 8 Premium User Manual