Samsung SGH E350E User Manual

* Depending on the software installed or your service provider or country, some of

the descriptions in this manual may not match your phone exactly.

* Depending on your country, your phone and accessories may appear

different from the illustrations in this manual.

Printed in Korea

Code No.:GH68-07123A

English. 06/2005. Rev 1.0

World Wide Web

http://www.samsungmobile.com

Drive safely at all times

Do not use a hand-held phone while driving. Park

the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference. Using them

in an aircraft is both illegal and dangerous.

precautions

Switch off the phone near all medical

equipment

Failure to comply with the following

precautions may be dangerous or illegal.

Hospitals or health care facilities may be using

equipment that could be sensitive to external radio

frequency energy. Follow any regulations or rules in

force.

Interference

Keep your phone away from small children

All wireless phones may be subject to interference,

which could affect their performance.

Keep the phone and all its parts, including accessories,

out of the reach of small children.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any area and

always switch off your phone whenever it is forbidden

to use it, or when it may cause interference or danger.

Use only Samsung-approved accessories and

batteries. Use of any unauthorised accessories could

damage your phone and may be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it dry.

Sensible use

Use only in the normal position (held to the ear). Avoid

unnecessary contact with the antenna when the phone

is switched on.

Qualified service

Only qualified service personnel may repair your

phone.

Emergency calls

For more detailed safety information, see "Health and

safety information" on page 87.

Key in the emergency number for your present

location, then press

About this Guide

•

Camera and camcorder

Use the camera module on your

phone to take a photo or record a

video.

This User’s Guide provides you with condensed

information about how to use your phone. To quickly

learn the basics for your phone, please refer to “Get

started” and “Step outside the phone.”

In this guide, the following instruction icons appear:

Special

features of your phone

Indicates that you need to pay careful

attention to the subsequent information

regarding safety or phone features.

Indicates that you can get more information

on the referenced page.

ꢀ

•

MP3 player

Play MP3 music files on your

phone.

→

Indicates that you need to press the

Navigation keys to scroll to the specified

option and then select it.

•

IrDA

[

]

Indicates a key on the phone. For example,

Send and receive Address book

and Media album data via an

infrared port.

[

]

< >

Indicates a soft key, whose function is

displayed on the phone screen. For example,

<Menu>

•

Get personal with photo caller

See who’s calling you when the

phone displays their very own

photo displays.

•

E-mail

Send and receive e-mails with image, video, and

audio attachments.

•

Java

Enjoy Java™-based embedded

games and download new games.

Name card

Create name cards with your

number and profile. Whenever

introducing yourself to others, use

this convenient electronic name

card.

Calendar

Keep track of your daily, weekly,

and monthly schedule.

•

Web browser

Voice recorder

Record memos or sounds.

Access the wireless web and access

various services and current

information.

•

Multimedia message service (MMS)

Send and receive MMS messages with a

combination of text, image, video, and audio.

Play MP3s............................................................ 16

Play games.......................................................... 17

Browse the web ................................................... 18

Use Address book................................................. 18

Send messages.................................................... 19

View messages .................................................... 21

Contents

Unpack

Make sure you have each item

Your phone

Enter text

Buttons, features, and locations

Get started

ABC, T9, Number, and Symbol modes

Call functions

First steps to operating your phone

Advanced calling features

Menu functions

Install and charge the phone ................................... 7

Power on or off...................................................... 8

Keys and display.................................................... 9

Access menu functions.......................................... 11

Access Home Screen menus .................................. 12

Customise your phone .......................................... 12

Make/Answer calls................................................ 14

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

Begin with your camera, music, and other special features

Use camera......................................................... 15

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

1 Call history

ꢀp.29

3 Settings

ꢀp.36

6 Browser

ꢀp.66

8 Media album

ꢀ

p.78

1 Current contacts

2 Missed calls

3 Dialled calls

4 Received calls

5 Select and delete

6 Call time

ꢀ

p.29

p.30

p.31

1 Time & Date

2 Phone settings

3 Display settings

4 Sound settings

5 Network services

6 Infrared

7 Security

8 Memory status

9 Reset settings

ꢀ

p.36

p.37

p.38

p.39

p.42

p.44

1 Home

2 Bookmarks

3 Go to URL

4 Clear cache

5 Streaming settings

6 Profile settings

7 Current profile

ꢀ

p.66

p.67

p.68

p.70

1 Images

2 Videos

3 Music

4 Sounds

5 Other files

6 Memory status

ꢀ

p.78

p.79

p.80

p.81

7 Call costs^*

9 Calendar

ꢀ

p.81

2 Address book

ꢀp.31

7 Applications

ꢀp.70

1 Contact list

2 FDN list

3 Add new contact

4 Group

ꢀp.31

ꢀp.32

ꢀp.33

ꢀp.34

ꢀp.35

ꢀp.36

1 MP3 player

2 Voice recorder

3 Java world

4 World time

5 Alarm

6 Calculator

7 Convertor

8 Timer

ꢀp.70

ꢀp.72

ꢀp.73

ꢀp.75

ꢀp.76

ꢀp.77

ꢀp.78

4 Camera

ꢀ

p.44

5 Messaging

ꢀ

p.51

5 Speed dial

6 My name card

7 Own number

8 Management

9 Service number^*

1 Create new message

2 My messages

3 Templates

4 Select and delete

5 Settings

6 Broadcast messages

7 Memory status

ꢀ

p.51

p.54

p.60

p.61

p.66

9 Stopwatch

0 Help

SIM AT*

*Shows only if supported by your

SIM card.

Unpack

Your phone

Make sure you have each item

Buttons, features, and locations

Earpiece

Display

Mirror

Travel adapter

Phone

Camera

Flash

Navigation keys

(Up/Down/Left/

Right)

Headset

jack

Right soft key

Web access/

Confirm key

Left soft key

Volume keys

Dial key

Alphanumeric

keys

User’s guide

Battery

Camera

key

Power on/off/

Menu exit key

You can obtain various accessories from

your local Samsung dealer.

Cancel/

Correct key

The items supplied with your phone

and the accessories at your Samsung

dealer may vary, depending on your

country or service provider.

IrDA port

Microphone

Special

function keys

Get started

First steps to operating your phone

Install the battery.

Plug the travel adapter

into the phone.

SIM card information

When you subscribe to a cellular network, you receive

a plug-in SIM (Subscriber Identity Module) card

loaded with your subscription details, such as your

PIN, and available optional services.

Install and charge the phone

Remove the battery.

Insert the SIM card.

Plug the adapter into a standard AC wall outlet.

When the phone is completely charged, unplug the

adapter from the power outlet.

If the phone is already

on, first turn it off by

Make sure that the gold-

coloured contacts on the

card face down into the

phone.

holding

[

Get started

Power on or off

Remove the adapter from the phone.

Switch on

1. Open the phone.

2. Press and hold [

the phone.

] to turn on

Do not turn on

the phone when

mobile phone

3. If necessary, enter the PIN and

use is prohibited.

press <OK>.

Low battery indicator

1. Open the phone.

Switch off

When the battery is low:

2. Press and hold [

•

a warning tone sounds,

the battery low message displays, and

Keypad lock

the empty battery icon

blinks.

When you close the phone, the keypad lock feature

locks the exposed keys so that nothing will happen if

the keys are accidentally pressed.

If the battery level becomes too low, the phone

automatically turns off. Recharge your battery.

To unlock the keypad, press the left soft key and press

<OK>.

Keys and display

Enter numbers, letters, and some

special characters.

Perform the function indicated on the

bottom line of the display.

In Idle mode, hold [1] down to access

your voicemail server. Hold [0] down to

In Menu mode, scroll through the menu

options.

enter an international prefix.

Enter special characters.

In Idle mode, hold [

]

down to activate

In Idle mode, launch the web browser.

or deactivate Quiet mode. Hold [

down to insert a pause between

numbers.

]

In Menu mode, select the highlighted

menu option.

Delete characters from the display.

Adjust the phone volume.

In Menu mode, return to the previous

menu level.

In Idle mode, with the phone open,

adjust the keypad tone volume. With

the phone closed, hold down to turn on

the backlight.

Send or answer a call.

In Idle mode, retrieve the recent

numbers dialled, missed, or received.

In Idle mode, hold down to turn on the

camera.

End a call. Hold down to switch the

phone on and off.

In Camera mode, take a photo or start

recording a video.

In Menu mode, cancel input and return

the phone to Idle mode.

Get started

Display

Layout

Icons

(continued)

Alarm set

New text message

New multimedia message

New e-mail message

New voicemail

Icons

display various icons.

Text and graphics

display messages,

instructions, and

information you enter.

Call diverting feature is active

IrDA port is active

Soft key function

indicators

show the current functions

assigned to the two soft

keys.

Contacts

Connected to hands-free or

headset

Roaming network

Icons

Home Zone, if you have

registered for the appropriate

service

Received signal strength

Call in progress

Out of your service area; you

cannot send or receive calls

Quiet mode is active

Call ringer set to vibrate

Battery power level

ꢀp. 39

Access menu functions

Select an

option

1. Press the appropriate soft key.

Use the soft

keys

The roles of the soft keys vary

depending on the function you are

using. The bottom line of the

2. Press the Navigation keys to

move to the next or previous

option.

display indicates their current role.

3. Press <Select> or [

] to

Contacts

confirm the function displayed

or option highlighted.

4. To exit, choose either of the

following methods.

•

Press <Back> or [

move up one level.

Press [ ] to return to Idle

mode.

C] to

Press the right soft

key to access

Contact list in the

Address book

menu.

Press the left soft

key to access

Menu mode.

•

Use shortcuts Press the number key

corresponding to the option you

want.

Get started

Access Home Screen menus

Customise your phone

On the Home Screen, there are icons on the left side

of the display, which give you easy access to popular

menus.

1. In Idle mode, press <Menu

Display

language

and select Settings

settings Language

2. Select a language.

→

Phone

→

• To move among the Home

Screen menu icons, press [Up]

or [Down].

Navigate

around the

Home Screen

1. In Idle mode, press <Menu

Call ringer

melody

and select Settings

settings

Ring tone

→

Sound

• To highlight a menu or access a

→

Incoming call

→

highlighted menu, press [

• To close a menu window or

return to the previous menu

level, press [Left].

2. Select a ringer category.

3. Select a ringer melody.

4. Press <Save>.

• To return to the Home Screen

from any screen, press [ ].

You can set a wallpaper for the idle

screen.

You can switch to Quiet mode to

avoid disturbing other people with

your phone sound.

Idle mode

wallpaper

Quiet mode

Phone lock

1. In Idle mode, press <Menu

and select Settings

settings

→

Display

Press and hold

[

]

in Idle mode.

→

Wallpaper

You can protect the phone against

unauthorised use with a phone

password. The phone will require

the password on powerup.

2. Select an image category.

3. Scroll to an image by pressing

[Left] or [Right].

4. Press <Save>.

1. In Idle mode, press <Menu

and select Settings

Security Change

password

2. Enter the default password,

“00000000” and press <OK>.

→

You can change the colour for the

display components, such as title

bars and highlight bars.

Menu mode

skin colour

→

1. In Idle mode, press <Menu

and select Settings Display

settings Skin

2. Select a colour pattern.

→

Get started

Make/Answer calls

3. Enter a new 4- to 8-digit

Phone lock

(continued)

password and press <OK>.

1. In Idle mode, enter an area

Make a call

4. Enter the new password again

code and phone number.

and press <OK>.

2. Press [ ].

5. Select Phone lock

6. Select Enable

7. Enter the password and press

OK>.

3. To end the call, press [ ].

1. When the phone is ringing,

press [ ].

Answer a call

2. To end the call, press [ ].

Press [ / ].

Adjust the

volume during

a call

Step outside the phone

Begin with your camera, music, and other special features

Use camera

1. In Idle mode, press and hold

] to turn on the camera.

Record a video

[

2. Press [1] to switch to Record

mode.

3. Press [ ] to start recording.

1. Open the phone.

Take a photo

4. Press [ ] to stop recording.

The video is saved

2. In Idle mode, press and hold

[

]

to turn on the camera.

automatically.

3. Aim the camera lens at the

subject and adjust the image.

1. In Idle mode, press <Menu

and select Media album

Videos Videos

2. Select the video you want.

Play a video

4. Press [ ] to take a photo. The

photo is saved automatically.

→

5. Press [

photo.

] to take another

1. In Idle mode, press <Menu

and select Media album

Images Photos

2. Select the photo you want.

View a photo

→

Step outside the phone

Play MP3s

1. From the MP3 player screen,

press [ ].

Play MP3 file

Use these methods:

Copy MP3 files

to the phone

2. During playback, use the

following keys:

•

Download from the wireless

web p. 66

ꢀ

•

[

]: pauses/resumes

•

Download from a computer

using Samsung PC Studio

playback.

[Left]: goes back to the

previous file.

[Right]: skips to the next

file.

ꢀSamsung PC Studio User’s

Guide

•

Receive via IrDA

ꢀp. 42

•

[Up]: opens the play list.

[Down]: stops playback.

[ / ]: adjusts the volume.

1. In Idle mode, press <Menu

and select Applications

MP3 player

2. Press <Options> and select

Add to list Add all or Add a

file

Create a play

list

→

3. For Add a file, select a file and

press <Add>. Repeat from step

Play games

Select Game

→

the game mode

a player.

Play Freekick

you want a team

→

1. In Idle mode, press <Menu

and select Applications

Java world Downloads

Forgotten Warrior

or Arch Angel

Select a game

→

Freekick,

1. Select NEW GAME

→

a game

Play Arch Angel

mode

2. Press any key to launch the

game.

2. Press <NEXT> repeatedly and

then <PLAY>.

3. Press <NEXT> repeatedly and

then <START>, or <SKIP> to

start the game immediately.

1. Press <PLAY> and select

Play Forgotten

Warrior

START GAME

2. Press <SKIP>.

Step outside the phone

Browse the web

Use Address book

Using a built-in web browser, you can get easy access

to the wireless web to get a variety of up-to-date

services and information and to enjoy downloads of

web content.

To the phone’s memory

Add an entry

1. In Idle mode, enter a phone

number and press <Options

and select Save

In Idle mode, press <Menu> and

select Browser Home

Launch the

web browser

2. Select Phone

→

a number type.

→

3. Specify the contact information:

First name, Last name, Mobile,

Home, Office, Fax, Other, Email,

Graphic ID, Alert, Group, and

Notes.

•

To scroll through browser items,

press the Navigation keys.

Navigate with

the web

browser

•

To select an item, press < >.

4. Press [

] to save the entry.

To return to the previous page,

To the SIM card

press <Back> or [

To return to the homepage,

press and hold [ ].

To access browser options,

C].

1. In Idle mode, enter a phone

•

number and press <Options

and select Save

2. Select SIM

3. Enter a name.

4. Press [ ] to save the entry.

press [ ] or select

top of the screen.

on the

Send messages

1. In Idle mode, press

Contacts>.

Find an entry

1. In Idle mode, press <Menu

Send a text

2. Select an entry.

and select Messaging

Create new message

→

message (SMS)

SMS.

3. Select a number and press

[

]

to dial, or press

2. Enter the message text.

3. Press <Options> and select

Options> to access options.

Save and send or Send only

1. In Idle mode, press <Menu

and select Address book

name card

Create and

send a name

card

4. Enter destination numbers.

→

5. Press [

message.

] to send the

2. Specify your contact

information.

3. Press [

card.

] to save the name

4. To send the name card to other

people, press <Options> and

select Send via

→

the sending

method you want.

Step outside the phone

1. In Idle mode, press <Menu

Send a

Send an e-mail

and select Messaging

Create new message

→

and select Messaging

Create new message

→

multimedia

message

(MMS)

MMS.

2. Select Subject

3. Enter the e-mail subject and

press [ ].

4. Select Message

5. Enter the e-mail text and press

6. Select File attach

2. Select Subject

3. Enter the message subject and

press [ ].

4. Select Picture & Video or

Sound and add media files.

5. Select Message

6. Enter the message text and

press [ ].

7. Press <Options> and select

Send

[

7. Add image, video, music, or

sound files.

8. Enter destination numbers or

addresses.

8. Press <Options> and select

Send

9. Enter e-mail addresses.

10. Press [ ] to send the e-mail.

9. Press [

message.

] to send the

View messages

1. In Idle mode, press [Up] or

View an e-mail

[Down] to scroll to the

on the Home Screen.

icon

1. In Idle mode, press [Up] or

View a text

message

[Down] to scroll to the

on the Home Screen.

icon

2. Press [

] and select Unread

2. Press [

] and select Unread

3. Press <Select> when Check

new mail is highlighted to

mess...

3. Select a message from the

Inbox.

retrieve an e-mail or a header.

4. Select an e-mail or a header.

1. In Idle mode, press [Up] or

View a

multimedia

message

5. If you selected a header, press

[Down] to scroll to the

on the Home Screen.

icon

Options> and select

Retrieve

2. Press [

mess...

] and select Unread

3. Select a message from the

Inbox.

Using ABC mode

Press the appropriate key until the character you want

appears on the screen.

Enter text

ABC, T9, Number, and Symbol modes

You can enter text for some features such as

messaging, Address book, or Calendar, using ABC

mode, T9 mode, Number mode, and Symbol mode.

Changing the text input mode

The text input mode indicator appears when the cursor

is in a text field.

•

Press the right soft key to change the text input

mode. Or, press and hold the right soft key and

select the mode you want.

: ABC mode

: T9 mode

: Number mode

: Symbol mode

•

Press and hold [ ] to switch between T9 and ABC

modes.

Tips for using ABC mode

•

To enter the same letter twice or to enter a

different letter on the same key, wait for the cursor

to move to the right automatically or press [Right].

Then, enter the next letter.

Press and hold [ ] to switch to Symbol mode.

•

Press [ ] to insert a space.

3. When the word displays correctly, go to step 4.

Otherwise, press [ ] to display alternative word

choices for the keys that you have pressed.

For example, OF and ME use [ ] and [ ].

Press [ ] to shift case. Lower Case (No indicator),

Initial capital ( ), and Capital lock ( ) are

available.

•

Press the Navigation keys to move the cursor.

4. Press [ ] to insert a space and enter the next

word.

Press [

] to delete characters one by one. Press

and hold [

C] to clear the display.

Tips for using T9 mode

•

Press [1] to enter periods or apostrophes

automatically.

Using T9 mode

T9 is a predictive text input mode that allows you to

key in any character using single keystrokes.

•

Press [ ] to shift case in T9 mode. Lower Case (No

indicator), Initial capital ( ), and Capital lock (

are available.

)

Entering a word in T9 mode

•

Press [ ] to insert a space.

1. Press [

each key once for each letter.

For example, press [ ], [ ], [

enter HELLO in T9 mode.

2] to [9] to start entering a word. Press

Press the Navigation keys to move the cursor.

Press [

and hold [

] to delete characters one by one. Press

5], [5], and [6] to

C] to clear the display.

T9 predicts the word that you are typing, and it

may change with each key that you press.

Adding a new word to the T9 dictionary

This feature may not be available for some languages.

1. Enter the word that you want to add.

2. Enter the whole word before editing or deleting

characters.

2. Press [0] to display alternative words for your key

Call functions

Advanced calling features

presses. When there are no more alternative

words, Spell appears on the bottom line.

3. Press <Spell>.

Making a call

1. In Idle mode, enter the area code and phone

number.

4. Enter the word you want using ABC mode and

press <OK>.

Using Number mode

2. Press [ ].

Number mode enables you to enter numbers.

Press

[C]

to clear the last digit or press and hold

[

to clear the whole display. You can move the

Press the keys corresponding to the digits you want.

cursor to edit an incorrect digit.

Using Symbol mode

Symbol mode enables you to insert symbols.

Making an international call

1. In Idle mode, press and hold [

appears.

0]. The

character

Press

2. Enter the country code, area code, and phone

number, then press [ ].

display more symbols

select a symbol

[Up] or [Down].

the corresponding

number key.

Redialling recent numbers

1. In Idle mode, press [ ] to display the list of

recent numbers.

clear the entered symbol(s)

insert the symbol(s)

[C].

2. Scroll to the number you want and press [ ].

<OK>.

Making a call from Address book

Tips for answering a call

•

When Anykey answer in the Extra settings

menu is active, you can press any key, except for

Once you have stored a number in Address book, you

can dial the number by selecting it from Address

<Reject>, [ / ], and [

].ꢀp. 37

book.ꢀp. 31

•

Press <Reject> or [ ] to reject a call.

You can also use the speed dial feature to assign your

most frequently called numbers to specific number

Press and hold [ / ] to mute the ringer.

keys.ꢀp. 34

Viewing missed calls

Dialling a number from the SIM card

If you have missed calls, the Home Screen displays

how many calls you have missed.

1. In Idle mode, enter the location number for the

phone number you want and press [ ].

1. Press [Up] or [Down] to scroll to the

2. Press [ ] and select Missed calls

icon.

2. Find the number your want.

3. Press <Dial> or [ ] to dial the number you want.

3. If necessary, scroll through the missed calls.

4. Press [ ] to dial the number you want.

Ending a call

Close the phone or press [ ].

Using the headset

Use the headset to make or answer calls without

holding the phone.

Answering a call

When you receive an incoming call, the phone rings

and displays the incoming call image.

Connect the headset to the jack on the right side of

the phone.

Press <Accept> or [ ] to answer the call.

Call functions

The button on the headset work as listed below:

2. Press [

] to return to normal phone mode.

Press

Placing a call on hold/Retrieving

redial the last call

answer a call

end a call

the button twice.

and hold the button.

Press <Hold> or <Retrieve> to place a call on hold

or retrieve the call.

Making a second call

You can make another call if your network supports it.

1. Press <Hold> to put the call on hold.

2. Make the second call in the normal way.

3. Press <Swap> to switch between the calls.

Options during a call

You can access a number of functions during a call.

Adjusting the volume during a call

4. Press <Options> and select End held call to end

Use [ / ] to adjust the earpiece volume during a call.

the call on hold.

5. To end the current call, press [ ].

Press [ ] to increase the volume level and [ ] to

decrease the volume level.

Answering a second call

Using the external speaker

Use the optional external speaker to talk and listen

with the phone a short distance away.

You can answer an incoming call while already on the

phone, if your network supports it and you have

activated the call waiting feature.ꢀp. 40

1. Press [ ] to answer the call. The first call is

automatically put on hold.

1. During a call, plug the speaker into the phone.

Speaker mode is automatically activated.

2. Press <Swap> to switch between the calls.

Switching off the microphone (Mute mode)

3. Press <Options> and select End held call to end

You can temporarily switch off your phone’s

microphone so that the person on the phone cannot

hear you.

the call on hold.

4. To end the current call, press [ ].

Press <Options> and select Mute or Unmute

Transferring a call

Muting or sending key tones

You can turn the key tones off or on.

You can transfer the currently active call to a caller on

hold, if your network supports it. With this option, the

two callers can talk to each other, but you are

disconnected from the call.

Press <Options> and select Mute keys or Send

keys

Press <Options> and select Transfer

To communicate with answering machines or

computerised telephone systems, Send keys must

be selected.

Using the voice clarity feature

This feature removes extraneous noise and increases

call quality so that the person with whom you are

speaking can hear you clearly even if you are in a

noisy place.

Using Address book

You can access the Address book menu to locate or

store entries.ꢀp. 31

Press <Options> and select Voice clarity on or

Press <Options> and select Address book

Voice clarity off

Call functions

Sending a sequence of DTMF tones

Using SIM services

Dual tone multi-frequency (DTMF) tones are the tones

used in phones for tone dialling.

The SIM service menu is available if you use a SIM

AT card in your phone. A SIM AT card provides

services such as news, weather, sports,

You can send DTMF tones as a group after entering the

entire number you need to send or retrieving a

number from Address book. This feature is helpful for

entering a password or an account number when you

call an automated system, like a banking service.

entertainment, and location services.

For details, see your SIM card instructions or contact

your service provider.

Making a multi-party call

1. When connected with a teleservice system, press

Use this feature to allow as many as six people to join

a multi-party call, or conference call.

Options> and select Send DTMF

2. Enter the number you need to send and press

OK>.

Your service provider must support multi-party calls

for you to use this feature.

Using the message service

You can access the Messaging menu to read an

incoming message and send a new message.

Setting up a multi-party call

1. Call the first participant.

2. Call the second participant. The first call is

automatically put on hold.

Press <Options> and select Message

3. Press <Options> and select Join. The first

participant is added to the multi-party call.

4. If desired, call another person or answer an

incoming call.

Menu functions

5. Press <Options> and select Join

All menu options listed

6. Repeat steps 4 and 5 as desired.

Call history (Menu 1)

Use this menu to view the calls you have dialled,

received, or missed, the length of your calls, and the

cost of your calls.

Having a private conversation with one

participant

1. Press <Options> and select Split

2. Select a name or number from the participant list.

To access this menu, press <Menu> in Idle mode and

You can talk privately with that person, while the

other participants converse with each other.

select Call history

3. To return to the multi-party call, press <Options

Current contacts (Menu 1.1)

and select Join

This menu displays the most recent calls dialled,

received, or missed.

Disconnecting one participant

1. Press <Options> and select Remove

Accessing a call record

1. Press [Left] or [Right] to select a call type.

2. Press [Up] or [Down] to scroll through the call list.

2. Select a name or number from the participant list.

The participant is dropped from the call, but the

call continues with the other parties.

3. Press [

] to view the details of a call, or [ ] to

3. Close the phone or press [ ] to end the multi-

party call.

dial a number.

Menu functions

Using call record options

Received calls (Menu 1.4)

While viewing the call list, press <Options> to access

the following options:

This menu displays the most recent calls you have

received.

•

Details: display the details of the selected call.

Select and delete (Menu 1.5)

Call: dial the number.

Use this menu to select the call record type(s) and

delete all of the records in the selected call type(s).

Save as contacts: save the number in Address

book.

1. Press [

] to check the call type(s) to be cleared.

•

Send message: send an SMS or MMS message.

2. Press <Delete>.

Delete: delete the selected call record or all call

records.

3. Press <Yes> to confirm the deletion.

Missed calls (Menu 1.2)

Call time (Menu 1.6)

This menu displays the most recent calls that you did

not answer.

This menu displays the time log for calls made and

received. The actual time invoiced by your service

provider will vary.

Dialled calls (Menu 1.3)

•

Last call time: check the length of your last call.

This menu displays the most recent calls you have

dialled.

Total sent: check the total length of all the calls

you have dialled.

•

Total received: check the total length of all the

calls you have received.

•

Reset timers: reset the call timers. You need to

enter the phone password.

•

Price/Unit: set the price per unit that is applied

when the cost of your calls is calculated.

The password is preset to 00000000. You can

change this password.

ꢀp. 43

Address book (Menu 2)

Call costs (Menu 1.7)

You can store phone numbers on your SIM card and in

your phone’s memory. The SIM card and phone’s

memory are physically separate, but they are used as

a single entity called Address book.

This network feature displays the cost of calls. This

menu is available only if your SIM card supports this

feature. Note that this is not intended to be used for

billing purposes.

To access this menu, press <Menu> in Idle mode and

select Address book

•

Last call cost: check the cost of your last call.

Total cost: check the total cost of all of your calls.

If the total cost exceeds the maximum cost set in

Set max cost, you must reset the counter before

you can make another call.

Contact list (Menu 2.1)

Use this menu to search for numbers in Address book.

Press <Contacts> in Idle mode to quickly access

•

Max cost: check the maximum cost limit set in

this menu.

Set max cost

Finding an entry

1. Enter the first few letters of the name that you

want to find.

•

Reset counters: reset the cost counters.

Set max cost: set the maximum cost authorised

for your calls.

2. Select the name you want from the list.

Menu functions

3. Select a number and press [ ] to dial the

number, or <Options> to access Address book

options.

FDN list (Menu 2.2)

Use this menu to create a list of contacts to be used in

FDN (Fixed Dialling Number) mode, in which the

phone allows outgoing calls only to the specified

phone numbers, if your SIM card supports this

feature. You can activate FDN mode in the FDN mode

Using Address book options

While viewing the contact list or contact details, press

Options> to access the following options:

View: display details about the contact.

Edit: edit the contact information.

menu.ꢀp. 43

•

Adding a contact

•

1. Press <Options> and select Add

•

Send message: send an SMS or MMS message.

2. Enter your PIN2 and press <OK>.

•

Copy: copy the contact to the phone’s memory or

3. Enter a name and phone number, or press

the SIM card.

Options> and select Contact list to retrieve a

•

Add new contact: add a new contact to the

phone’s memory or the SIM card.

contact from Address book.

4. If necessary, change the location number.

5. Press <Save> to save the contact.

Send via: send the contact via SMS, MMS, e-mail,

or infrared port.

•

Delete: delete the selected contact or all contacts.

Using contact options

Language select: select the text input language.

Scroll to a contact and press <Options> to access

options.ꢀ“Using Address book options”

2. Enter a name and press [Down].

3. Enter a phone number.

Add new contact (Menu 2.3)

Use this menu to add a new contact to Address book.

4. Press [Down] and change the location number, if

necessary.

Storing a number in the phone’s memory

1. Select Phone

If you select the Graphic ID Alert, Group

2. Change the settings or enter information about the

contact.

line, the contact must be saved to the phone’s

memory.

•

First name

Mobile Home

number in any category.

Last name: assign a name.

5. Press <Save> to save the contact.

Office Fax Other: add a

Group (Menu 2.4)

•

Email: assign an e-mail address.

Use this menu to organise your contacts in caller

groups.

Graphic ID: assign an image as a caller ID

image to alert you to a call from the number.

Alert: assign a ringer melody to alert you to a

call from the contact.

•

Adding members to a caller group

1. Select a group.

•

Group: assign the contact to a caller group.

Notes: add a memo about the person.

2. Press <Add>. The list of contacts stored in your

phone’s memory is displayed.

3. Press <Save> to save the contact.

3. Scroll to a contact and press <Select>.

4. To add more contacts, press <Options> and

Storing a number on the SIM card

select Add

→

a contact.

1. Select SIM

5. Repeat step 4 as desired.

Menu functions

Managing caller groups

Managing speed dial entries

While viewing the group list, press <Options> to

access the following options:

From the Speed dial screen, press <Options> to

access the following options:

•

View: display the members of the selected group.

Add: add a new group.

•

Add: assign a number to an unassigned key.

View: view the number assigned to the key.

Edit: change the properties of the selected group.

Change: assign a different number to the

assigned key.

Send message: send SMS, MMS, or e-mail

messages to the group members.

•

Remove: clear the speed dial settings for the

selected key.

•

Delete: delete the selected group. Group

members, however, are not deleted from Address

book.

Dialling speed dial entries

Press and hold the appropriate key in Idle mode.

Speed dial (Menu 2.5)

My name card (Menu 2.6)

Use this menu to assign a speed dial number (2 to 9)

for eight of your most frequently called numbers.

Use this menu to create a name card and send it to

other people.

Assigning speed dial numbers

1. Select a key location from

for your voicemail server.

Saving your name card

9. Key

is reserved

The procedure for creating your name card is the

same as the one for saving a phone number in the

2. Select the contact you want from the contact list.

phone’s memory.ꢀp. 33

3. Select a number from the contact, if it has more

than one number.

•

Copy all to phone: copy all of the contacts stored

on the SIM card to the phone’s memory.

Using name card options

After saving your name card, press <Options> to

access the following options:

Sort by contacts: change the sort order of

Address book.

•

Edit: edit the name card.

Select and delete: select the memory location

type(s) and delete all of the contacts in the

selected location(s).

Send via: send the name card via SMS, MMS,

e-mail, or infrared port.

•

Remove: delete the name card.

1. Press [

cleared.

] to check the location(s) to be

Own number (Menu 2.7)

2. Press <Delete>.

Use this feature to check your phone numbers, or to

assign a name to each of the numbers. Changes made

here do not affect the actual subscriber numbers on

your SIM card.

3. Press <Yes> to confirm the deletion.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You

can change this password.

ꢀp. 43

Management (Menu 2.8)

•

Memory status: display the number of contacts

you have stored in Address book.

Use this menu to manage Address book.

•

Default saving: select a default memory location

to save contacts.

If you select Ask on saving, the phone will ask

you to select a memory location when saving a

number.

Menu functions

•

Set time: enter the current time.

Service number (Menu 2.9)

AM/PM: select AM or PM in 12-hour time format.

Time format: select a time format.

Set date: enter the current date.

This menu is available if your SIM card supports

Service Dialling Numbers (SDN). Use this menu to

view the list of SDNs assigned by your service

provider, including emergency numbers, directory

enquiries, and voicemail numbers.

Date format: select a date format.

Scroll to the number you want and press <Dial> or

Phone settings (Menu 3.2)

[

Many different features of your phone’s system can be

customised to suit your preferences.

Settings (Menu 3)

Language (Menu 3.2.1)

Use this menu to select one of several languages for

the display text.

Use this menu to customise your phone settings. You

can also reset the settings to their default values.

To access this menu, press <Menu> in Idle mode and

Slide settings (Menu 3.2.2)

select Settings

Use this menu to set how the phone reacts when you

open it for an incoming call, and when you close it

while using a function.

Time & Date (Menu 3.1)

Use this menu to change the time and date displayed

on your phone. Before setting the time and date,

specify your time zone in the World time menu.

•

Up: set whether or not to answer a call by opening

the phone.

ꢀp. 75

•

Down: set whether or not the phone maintains

the menu you are using when you close the phone.

Display settings (Menu 3.3)

Use this menu to change settings for the display and

light.

When you set Down to Continue operation

the keypad lock works just in Idle mode.

Wallpaper (Menu 3.3.1)

Extra settings (Menu 3.2.3)

You can change the background image that is

displayed in Idle mode.

You can turn the automatic redialling or answering

feature on or off. You can also activate the voice clarity

feature.

Text display (Menu 3.3.2)

You can change the display settings for the text

displayed on the idle screen.

•

Auto redial: set the phone to make up to ten

attempts to redial a phone number after an

unsuccessful call.

•

Text position: select a text position on the

display.

•

Anykey answer: answer an incoming call by

pressing any key, except <Reject>, [ / ] and

•

Text style: select a text style.

[

When this option is not selected, you must press

Accept> or [ ] to answer a call.

Text colour: select a text colour.

Skin (Menu 3.3.3)

You can select a skin colour for Menu mode.

•

Voice clarity: increase the microphone’s

sensitivity to allow the other person on the phone

to hear your voice clearly, even through you may

be whispering.

LCD brightness (Menu 3.3.4)

You can adjust the brightness of the display for

varying lighting conditions.

Menu functions

Melody: the phone rings using the selected

ringtone.

Backlight (Menu 3.3.5)

You can select the length of time the backlight and the

display stays on.

Vibration: the phone vibrates but not rings.

Vibration then melody: the phone vibrates three

times and then starts ringing.

•

On: select the length of time the backlight is on at

times of inactivity.

•

Dim: select the length of time the display is in

Dimming mode after the backlight turns off.

Keypad tone (Menu 3.4.2)

Use this menu to select the tone that the phone

sounds when you press a key.

Dialing font colour (Menu 3.3.6)

You can adjust the keypad tone volume using

[ / ] in Idle mode.

Use this menu to display numbers in colours when

entering a phone number for dialling.

Message tone (Menu 3.4.3)

Sound settings (Menu 3.4)

Use this menu to set up the ringtone for incoming

messages.

Use this menu to customise various sound settings.

Incoming call (Menu 3.4.1)

•

Tone: select one of several message tones.

Use this menu to select a volume and alert type for

incoming calls.

Alert type: specify how you are to be informed of

any incoming messages.

•

Ring tone: select a ringtone for the call ringer.

•

Repetition: specify how often the phone informs

you of a new message.

Volume: select a ringtone volume.

Alert type: specify how you are to be informed of

incoming calls.

•

Alerts on call: set the phone to beep when you

receive a new message or when the time for an

alarm comes during a call.

Power on/off (Menu 3.4.4)

Use this menu to select the melody that the phone

plays when it is switched on or off.

Indicative tones: set the phone to beep when a

pop-up window appears to indicate that your

phone has completed an operation or that an error

occurs.

Slide tone (Menu 3.4.5)

Use this menu to select the tone that the phone

sounds when you open or close the phone.

Quiet mode (Menu 3.4.6)

Network services (Menu 3.5)

Use this menu to set how the phone acts to alert you

to a specific event in Quiet mode, instead of making

sounds.

Use this menu to access network services. Please

contact your service provider to check their availability

and subscribe to them, if you wish.

•

Vibration: set the phone to vibrate.

Call diverting (Menu 3.5.1)

Mute: mute all sound settings.

This network service reroutes incoming calls to a

phone number that you specify.

Extra tones (Menu 3.4.7)

Use this menu to customise additional tones for the

phone.

1. Select a call diverting option:

•

Divert always: divert all calls.

Busy: divert calls when you are on another

call.

•

Minute minder: set the phone to beep every

minute during an outgoing call to keep you

informed of the length of your call.

•

No reply: divert calls when you do not answer

the phone.

•

Connection tone: set the phone to beep when it

is connected to the system.

Menu functions

•

Unreachable: divert calls when you are not in

an area covered by your service provider or

when your phone is switched off.

when you are abroad, and to your home

country.

All incoming: prohibit incoming calls.

Incoming while abroad: prohibit incoming

calls when you use your phone outside of your

home country.

Cancel all: cancel all call barring settings,

allowing calls to be sent and received normally.

Change barring password: change the call

barring password obtained from your service

provider.

•

Cancel all: cancel all call diverting options.

2. Select the type of calls to be diverted.

3. To activate call diverting, select Activate

•

Otherwise, select Deactivate

4. Move to the Divert to line.

5. Enter the number to which calls are to be diverted

and press <Select>.

6. If you selected No reply, move to the Sec line and

select the length of time the network delays before

diverting a call.

2. Select the type of calls to be barred.

3. Select Activate. To deactivate call barring, select

Deactivate

Call barring (Menu 3.5.2)

4. Enter the call barring password supplied by your

service provider and press <Select>.

This network service allows you to restrict your calls.

1. Select a call barring option:

Call waiting (Menu 3.5.3)

•

All outgoing: prohibit outgoing calls.

This network service informs you when someone is

trying to reach you while you are on another call.

International: prohibit international calls.

International except to home: only allow

calls to numbers within the current country

1. Select the type of calls to which call waiting option

will apply.

2. Select Activate and press <Select>.

•

Hide number: ensure your number does not

display on the other person’s phone.

To deactivate call waiting, select Deactivate

Send number: send your number each time you

make a call.

Network selection (Menu 3.5.4)

This network service allows you to either automatically

or manually select the network to be used while

roaming outside of your home area.

Voice mail server (Menu 3.5.6)

Use this menu to store the number of the voicemail

server and access your voicemails.

You can select a network other than your home

network only if there is a valid roaming agreement

between the two.

You must enter the voice server number before you

can access your voicemails. Your service provider

can give the voice server number.

•

Automatic: connect to the first available network

when roaming.

•

Connect to answer phone: connect to the

voicemail server to allow you to listen to your

messages. You can also connect to the voicemail

•

Manual: select the network you want.

Caller ID (Menu 3.5.5)

server by pressing and holding [1] in Idle mode.

This network service allows you to prevent your phone

number from being displayed on the phone of the

person being called. However, some networks do not

allow the user to change this setting.

Answer phone number: enter the voicemail

server number.

Band selection (Menu 3.5.7)

•

Default: use the default setting provided by the

network.

For the phone to make and receive phone calls, it

must register with an available network. Your phone

can handle any of the following types of networks:

Menu functions

GSM 1900, Combined GSM 900/1800, and Tri band

(GSM 900/1800/1900).

•

Activate the infrared feature on your phone (the

IrDA icon displays on the top line).

Align the IrDA port on the

phone with the IrDA port

on the other device.

The country where you purchased your phone

determines the default band that it uses. When you

travel abroad, you may need to change to an

appropriate band.

If there is no communication

between your phone and the

other IrDA-compliant device

within 5 minutes of activating

the feature, it is automatically

deactivated.

When you select a new band, your phone

automatically searches for all available networks. Your

phone registers with a preferred network within the

band.

Infrared (Menu 3.6)

Security (Menu 3.7)

Use this menu to send and receive data through the

infrared port.

Use this menu to protect the phone against

unauthorised use by managing the several access

codes of your phone and SIM card.

You cannot use the IrDA feature while using

multimedia features such as voice recorder,

camera, and MP3 player, or vice versa.

If you enter an incorrect PIN/PIN2 three times in

succession, the SIM card is blocked. To unblock it,

you need to enter your PUK/PUK2 (Personal

Unblocking Key). The codes are supplied by your

network operator.

To use an infrared connection, you must do the

following:

•

Configure and activate an IrDA-compliant infrared

port on the other device.

PIN check (Menu 3.7.1)

Privacy (Menu 3.7.5)

The 4- to 8-digit PIN (Personal Identification Number)

protects your SIM card against unauthorised use.

When this feature is enabled, the phone requires your

PIN each time it is switched on.

Use this menu to lock your media content, including

messages, images, videos, music files, sounds, and

other files.

1. Press [

] to check the item(s) to lock.

2. Press <Save>.

Change PIN (Menu 3.7.2)

3. Enter the phone password and press <OK>.

Use this menu to change your PIN. The PIN check

feature must be enabled to use this feature.

To access a locked item, you need to enter the phone

password.

Phone lock (Menu 3.7.3)

SIM lock (Menu 3.7.6)

This feature locks the phone from unauthorised use.

The SIM lock feature allows your phone to work only

with the current SIM by assigning a SIM lock code. You

must enter the SIM lock code to use a different SIM

card.

When this feature is enabled, you must enter a 4- to

8-digit phone password each time the phone is

switched on.

The password is preset to 00000000. To change the

password, use the Change password menu.

FDN mode (Menu 3.7.7)

If supported by your SIM card, Fixed Dialling Number

(FDN) mode restricts your outgoing calls to a limited

set of phone numbers. When this feature is enabled,

you can make calls only to phone numbers stored on

the SIM card.

Change password (Menu 3.7.4)

Use this menu to change your phone password. The

password is preset to 00000000

Menu functions

Change PIN2 (Menu 3.7.8)

Camera (Menu 4)

You can use the camera module embedded in your

phone to take photos and record videos.

If supported by your SIM card, the change PIN2

feature changes your current PIN2.

To access this menu, press <Menu> in Idle mode and

select Camera, or press and hold [ ].

Memory status (Menu 3.8)

Use this menu to check the amount of memory being

• Do not take photos of people without their

permission.

• Do not take photos in a place where cameras are

not allowed.

used for storing data in Shared memory

Messaging Media album Calendar Address

book, and JAVA world

• Do not take photos in a place where you may

interfere with another person’s privacy.

Reset settings (Menu 3.9)

Use this menu to reset the phone settings, display

settings, and sound settings individually. You can also

reset all the settings in your phone at the same time.

Take a photo

You can take photos in various modes using the

phone. The camera produces JPEG photos.

1. Press [

be reset.

] to check the setting category(ies) to

When you take a photo in direct sunlight or in

bright conditions, shadows may appear on the

photo.

2. Press <Reset> to reset the marked items.

3. Press <Yes> to confirm the reset.

4. Enter the phone password and press <OK>.

The password is preset to 00000000. You can

change this password

ꢀp. 43

1. Access the Camera menu to turn on the camera.

Using camera options in Capture mode

The image to be captured appears on the display.

In Capture mode, press the left soft key to access the

following options:

Be careful not to cover the camera lens with

your hand.

•

Record video: switch to Record mode.

Shooting mode: take a photo in the following

modes:

2. Adjust the image by aiming the camera lens at the

subject.

Single shot: take a photo in normal mode.

•

Press the left soft key to access camera

options. See the next section.

Multi shot: take a series of action stills. Select the

number of photos the camera will take.

•

Use the keypad to change the camera settings

•

Effects: change the colour tone or apply a special

effect to a photo.

or switch to other modes.

3. Press [ to take a photo. The photo is saved in

the Photos folder.

ꢀp. 46

]

•

Frames: apply a decorative frame to a photo.

Flash: use the one of the following flash options:

Off: turn off the flash.

4. To

Press

use photo options

delete the photo

Options>.ꢀp. 47

Shoot only: turn the flash on for the current shot.

After you take a photo, the flash turns off.

Delete> and then

Yes>.

Permanent: use the flash when you take a photo.

•

Timer: set a time delay before the camera takes a

photo.

return to Capture mode

[

Menu functions

•

Go to photos: go to the Photos folder.

Using the keypad in Capture mode

•

Settings: change the default settings for taking a

photo.

You can use the keypad to customise your camera

settings in Capture mode.

Size: select an image size.

Key

Function

Quality: select an image quality.

View finder: change the view mode.

Shutter sound: select the sound that you hear

Flips the image vertically.

Shows the mirror image.

when you press the shutter release, [

Left/Right Adjusts the brightness of the image.

Zoom sound: turn on or off the sound that you

hear when zooming in or out.

Up/Down

Zooms in or out.

Brightness sound: turn on or off the sound that

you hear when adjusting the image brightness.

Switches to Record mode.

ꢀp. 48

Changes the image size.

Default name: change the default prefix of the

file name.

Changes the image quality.

Changes the camera mode.

•

Camera short cuts: view the functions of the

keys you can use.

Changes the colour tone or applies a

special effect to a photo.

Selects a decorative frame.

•

Properties: access the photo properties.

Key

Function

Viewing a photo

1. In Capture mode, press the left soft key and select

Go to photos

2. Scroll to a photo and press [

While viewing a photo or the photo list, press

Sets the timer.

Goes to the Photos folder.

Determine the flash use.

Changes the preview screen.

Options> to access the following options:

View: view the photo on the full screen.

List: return the screen to the photo list.

Using photo options

•

After saving a photo, press <Options> to access the

following options:

•

Send via: send the photo via MMS, e-mail, or

infrared port.

•

Take another: return to Capture mode.

Send via: send the photo via MMS, e-mail, or

infrared port.

•

Set as: set the photo as your wallpaper for the

Idle screen or as a caller ID image for an Address

book entry.

•

Set as: set the photo as your wallpaper for the idle

screen or as a caller ID image for an Address book

entry.

Edit: add emoticons, frames, or effects to the

image.

•

Delete: delete the photo.

•

Delete: delete the photo or all photos.

Rename: change the name of the photo.

Go to photos: go to the Photos folder.

Protection: protect the photo from being deleted.

Rename: change the name of the photo.

Move to favourite images: move the photo to

the Favourite images folder.

Menu functions

•

Slide show: set all photos to display as a slide

show. You can select a time interval between

photos.

5. To

play back the video clip

Press

the left soft key.

p. 50

] and then <Yes>.

the right soft key.

[

use video options

•

Protection: protect the photo from being deleted.

ꢀ

Properties: access the photo properties.

delete the video clip

Recording video

return to Record mode

You can record a video of what is displayed on the

camera screen and save it as a .3gp file.

Using camera options in Record mode

1. In Capture mode, press [1].

In Record mode, press the left soft key to access the

following options:

2. Aim the camera lens at the subject to adjust the

image.

•

Take a photo: switch to Capture mode.

•

Press the left soft key to access camera

options. See the next section.

Effects: change the colour tone or apply a special

effect to a video.

•

Use the keypad to change the camera settings

or switch to other modes. See the next page.

•

Flash: turn the flash on or off.

Timer: set a time delay before the camera starts

recording.

3. Press [

4. Press [

]

to start recording.

]

or the right soft key to stop recording.

•

Go to videos: go to the Videos folder.

The video is automatically saved in the Videos

folder.

•

Settings: change the following settings for

recording a video:

Using the keypad in Record mode

You can use the keypad to customise your camera

settings in Record mode:

Recording mode: select a video recording mode.

Select Limit of MMS to record a video suitable for

an MMS or e-mail message. The video clip is saved

in 3GP format.

Keys

Function

Flips the image vertically.

Shows the mirror image.

Adjusts the brightness of the image.

Select Normal to record a video within the limit of

the currently available memory.

Left/

Right

Size: select a file size.

Quality: select an image quality.

Audio rec.: record audio with a video clip.

Up/

Down

Zooms in or out.

Zoom sound: turn on or off the sound that you

hear when zooming in or out.

Switches to Capture mode.

ꢀp. 44

Changes the frame size.

Brightness sound: turn on or off the sound that

you hear when adjusting the image brightness.

Changes the image quality.

Default name: change the default prefix of the

file name.

Changes the video recording mode.

Changes the colour tone or applies a

special effect to a video clip.

•

Camcorder short cuts: view the functions of the

keys you can use.

Mutes or unmutes the audio.

Menu functions

Playing a video clip

Keys

Function

1. In Record mode, press the left soft key and select

Sets the timer.

Go to videos

2. Scroll to a video clip and press [

During playback, use the following keys:

Goes to the Videos folder.

turn the flash on or off.

Keys

Function

Using video options

Pauses/resumes playback.

Moves backward in a file.

Moves forward in a file.

Stops playback.

After saving a video clip, press the left soft key to

access the following options:

Left

Right

Down

•

Record another: return to Record mode.

Send via: send the video clip via MMS, e-mail, or

infrared port.

•

Go to videos: go to the Videos folder.

Adjusts the volume.

Rename: change the name of the video clip.

While viewing video list, press <Options> to access

the following options:

Protection: protect the video clip from being

deleted.

•

Play: play the selected video clip.

•

Properties: access the properties of the video

clip.

Send via: send the video clip via MMS, e-mail, or

infrared port.

•

Delete: delete the video clip or all video clips.

•

Rename: change the name of the video clip.

SMS (Menu 5.1.1)

Move to favourite videos: move the video clip to

the Favourite videos folder.

Short Message Service (SMS) allows you to send or

receive text messages that may include pictures,

animated images, and melodies.

•

Protection: protect the video clip from being

deleted.

The maximum number of characters allowed in a

text message varies by service provider. If your

message exceeds the maximum number of

characters, the phone will split the message.

Properties: access the properties of the video

clip.

1. Enter your message.

Messaging (Menu 5)

2. Press <Options> to access one of the following

Use the Messaging menu to send and receive text

messages, multimedia messages, and e-mails. You

can also use the web push message, and cell

broadcast message features.

options:

•

Insert: retrieve a text template, contact, or

bookmark item.

•

Add picture/Add animation/Add melody:

add a picture, animated image, or melody to

the message.

To access this menu, press <Menu> in Idle mode and

select Messaging

•

Attach: add a name card or calendar memo.

Create new message (Menu 5.1)

3. When you have finished, press <Options> and

select Save and send or Send only

Use this menu to create and send SMS, MMS, or

e-mail messages.

Menu functions

4. Enter a destination number.

•

Change image/Change video/Change

sound: change the added image, video, or

sound.

Preview: check the message you created.

Add page: add pages. Move to each page by

pressing [Left] or [Right] on the message

screen.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

•

5. Press [

] to send the message.

MMS (Menu 5.1.2)

Multimedia Message Service (MMS) delivers messages

containing a combination of text, image, video, and

audio, from phone to phone or from phone to e-mail.

•

Delete page: delete the current page.

Edit page: set the page duration or move the

current page to the next or previous page.

Attach: add a name card or calendar memo.

1. Select the Subject line.

•

2. Enter the message subject and press [

Remove subject

sound Remove message: clear the subject,

image or video, sound, or text.

7. When you have finished, press <Options> and

select Send

/Remove media/Remove

3. Select the Picture & Video or Sound line and add

an image, a video, or a sound file.

The maximum size allowed for an MMS message

can differ depending on the country.

8. Enter a phone number or an e-mail address.

4. Select the Message line.

To send the message to more than one recipient,

press [Down] and fill in additional destination

fields.

5. Enter the message text and press [

6. Press <Options> to access the following options:

Edit: edit the subject or text of your message.

•

9. Press [

] to send the message.

Email (Menu 5.1.3)

Options may vary depending on the selected

field.

You can send e-mails that include text, audio, and

images. To use this feature, you need to subscribe to

an e-mail service and set up your e-mail account and

•

Edit: edit the subject or text.

View: open the attached file.

profile.ꢀp. 64, p. 65

Remove subject/Remove message: clear

1. Select the Subject line.

the subject or text.

Remove: delete the selected attachment or all

attachments.

Remove all attachments: delete all

attachments.

2. Enter the subject of your e-mail and press [

3. Select the Message line.

•

4. Enter the e-mail text and press [

5. Select the File attach line.

8. When you have finished, press <Options> and

select Send

6. Add media files, other files, name cards, or

calendar memos.

9. Enter an e-mail address.

According to the DRM (Digital Rights

To send the e-mail to more than one recipient,

press [Down] and fill in additional destination

fields.

Management) system, messages having web

content may not be able to be forwarded. They

are indicated by

10. Press [

] to send the e-mail.

7. When you have finished, press <Options> to

access the following options:

Menu functions

My messages (Menu 5.2)

• According to the DRM (Digital Rights

Management) system, messages having web

content may not be able to be forwarded.

Use this menu to store all of the messages you have

received, sent, or tried to send.

They are indicated by

Inbox (Menu 5.2.1)

• A icon next to a message means that a

message is of high priority. A grey-coloured

message icon is of low priority.

This folder stores all of the messages you have

received, except for e-mails.

Viewing a message

While viewing the message list, press <Options> to

access the following options:

The following icons may appear on the message list;

depending on the message type or status, icons may

vary:

Options may vary depending on your country or

service provider.

•

SMS / Delivery report

MMS

•

View: open the message.

Retrieve: retrieve the MMS message from the

server.

MMS notification;

indicates that MMS has

been retrieving from the server and

indicates that MMS has been failed to

retrieve.

•

Reply via SMS: send a reply message via SMS.

Reply via MMS to: send a reply message via

MMS.

•

Web push

•

Forward: forward the message to other people.

Delete: delete the message or all messages.

•

Move to my folder: move the message to the My

folder box.

•

Add to block list: add the sender’s number to the

Block number list.

Move to phone/Move to SIM: move the

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

message between the SIM card and the phone’s

memory.

Cut media: save media content from the message

into your phone’s memory.

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

•

Properties: access the message properties.

MMS messages

•

Reply via SMS: send a reply message via SMS.

Using message options

Reply via MMS to: send a reply message via

MMS.

While viewing a message, press <Options> to access

the following options:

•

Forward: forward the message to other people.

SMS messages

Delete: delete the message or all messages.

•

Reply via: reply to the sender via SMS or MMS

message.

Add to block list: add the sender’s number to the

Block number list.

•

Forward: forward the message to other people.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Delete: delete the message.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Cut media: save media content from the message

into your phone’s memory.

Menu functions

•

Properties: access the message properties.

•

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Web push messages

•

Go to URL: connect to the URL specified in the

message.

Move to my folder: move the message to the My

folder box.

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

Delete: delete the message.

Delivery report messages

•

Properties: access the message properties.

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Outbox (Menu 5.2.3)

This folder stores messages that the phone is

attempting to send or has failed to send.

•

Delete: delete the message.

Draft (Menu 5.2.2)

In this folder, the following icons are displayed:

This folder stores messages you have saved to send at

a later time.

•

Messages that the phone is sending

Messages that the phone has failed to send

While viewing the message list, press <Options> to

access the following options:

While viewing a message, press <Options> to access

the following options:

•

View: open the message.

•

Send again: send the message again.

Edit: edit the message.

Open file: open the attached file.

Send: send the message.

Delete: delete the message or all messages.

•

Save file: save the attached file in the phone’s

memory.

•

Sort by: change the sort order of the message list.

Protection: protect the message from being

•

Delete: delete the selected message.

deleted.

Move to phone/Move to SIM: move the

•

Properties: access the message properties.

message between the SIM card and the phone’s

memory.

Sentbox (Menu 5.2.4)

This folder stores messages that you have sent.

•

Protection: protect the message from being

deleted.

While viewing a message, press <Options> to access

the following options:

Properties: access the message properties.

•

Forward: forward the message to other people.

From the message list, press <Options> to access

the following options:

Open file: open the attached file.

Save file: save the attached file in the phone’s

memory.

•

Cancel sending: cancel sending the message, if

the message is being sent.

•

Delete: delete the message.

•

View: open the message.

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Send again: send the message again.

Delete: delete the message or all messages.

Move to my folder: move the message to My

folder box.

•

Protection: protect the message from being

deleted.

•

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

Properties: access the message properties.

Menu functions

From the message list, press <Options> to access

the following options:

The phone checks for new e-mails and retrieves

received e-mails.

•

View: open the message.

The following icons may appear on the message

list; depending on the e-mail status, icons may

vary:

Forward: forward the message to other people.

Delete: delete the selected message.

•

has been read

has not been read

has been retrieved from the server

has not been retrieved;

Move to my folder: move the message to the My

folder box.

•

Move to phone/Move to SIM: move the

message between the SIM card and the phone’s

memory.

indicates that

an e-mail has been retrieving from the

server and

been failed to retrieve.

icon next to a message means that a

indicates that an e-mail has

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

message is of high priority. A grey-

coloured message icon is of low priority.

•

Properties: access the message properties.

Email box (Menu 5.2.5)

3. Scroll to an e-mail or header and press [

This folder stores e-mails that you have received.

1. Select an e-mail account.

4. If the e-mail has more than one page, press [ / ]

to scroll through pages one by one.

2. Press <Select> when Check new mail is

Press and hold [ / ] to move to the first or last

page.

highlighted to get new e-mails from the server.

5. Select an attached file to view or play it.

6. Press [ ] or [ ] to move to the previous or next

e-mail.

•

Add to block list: add the sender’s e-mail

address to the blocking list to reject e-mails from

that address.

While viewing the e-mail content or message list,

press <Options> to access the following options:

•

Cut address: extract URLs, e-mail addresses, or

phone numbers from the message.

Options may vary depending on the status of the

e-mail.

Properties: access the e-mail properties.

My folder (Menu 5.2.6)

•

View: open the selected item.

Use this menu to save the message you have saved in

this folder while reading a message.

Retrieve: retrieve one or all of the e-mails from

the e-mail server.

While viewing the message list, press <Options> to

access the following options:

•

Open file: open the attached file.

Save file: save the attached file in the phone’s

memory.

•

View: open the message.

Send: send the message.

Edit: edit the message.

•

Reply to: send a reply to the sender or to all of

the other recipients.

•

Forward: forward the e-mail to other people.

Mark as read: mark the e-mail as read.

Delete selection: delete the selected e-mail.

Delete all: delete all e-mails.

Delete: delete the selected message or all

messages.

•

Sort by: change the sort order of the messages.

Protection: protect the message from being

deleted.

Move to my folder: move the e-mail to the My

folder box.

•

Properties: access the message properties.

Menu functions

•

Send message: send the template as an MMS

message.

Templates (Menu 5.3)

Use this menu to create, edit, and send text templates

and MMS templates.

•

Edit: change the selected template.

Add new: add a new template.

Text template (Menu 5.3.1)

Delete: delete the template or all templates.

Use this menu to preset a maximum of frequently

used messages.

Select and delete (Menu 5.4)

From the Text template list, press <Options> to

access the following options:

Use this menu to select the message type(s) and

delete all of the messages in the selected message

type(s).

•

Edit: change the selected template.

Send message: send the template as an SMS,

MMS, or e-mail message.

1. Press [

cleared.

] to check the message type(s) to be

•

Delete: delete the template.

2. Press <Delete>.

MMS template (Menu 5.3.2)

3. Press <Yes> to confirm the deletion.

When you access this menu, you can view the list of

templates you have saved.

From the MMS template list, press <Options> to

access the following options:

•

View: open the template message.

Message type: set the default message type. The

network can convert the messages into the

selected format.

Settings (Menu 5.5)

Use this menu to set up various options for using the

messaging service.

Service centre: store or change the number of

your message centre.

SMS (Menu 5.5.1)

You can configure default SMS settings.

•

Block number: specify phone numbers from

which messages will not be accepted. Numbers

specified here are also included in the MMS

blocking list.

•

Send settings: set up the following options for

sending a text message:

Reply path: allow the recipient to reply to you

through your message centre.

MMS (Menu 5.5.2)

Delivery report: set the network to inform you

when your message has been delivered.

You can configure default MMS settings.

•

Send settings: set up the following options for

Character support: select a character encoding

type. If you select Auto, the phone switches the

encoding type from GSM-alphabet to Unicode if

you enter an Unicode character. Use of Unicode

encoding will reduce the maximum number of

characters in a message to about half. If this menu

is not shown, your phone provides the Automatic

character encoding by default.

sending a multimedia message:

Delivery report: set the network to inform you

when your message has been delivered.

Address hiding: set your address to be hidden

from the recipient’s phone.

Read reply: determine whether or not the phone

sends a read-reply request.

Priority: set the priority level of your messages.

Validity period: set the length of time your

messages are stored in the SMS centre.

Menu functions

Expiry date: set the length of time your messages

are stored in the message centre.

•

Automatic: the phone automatically retrieves

messages from the server.

•

Reject: the phone rejects all messages.

Manual: the phone displays notifications. Use

the Retrieve option to manually download new

messages.

Delivery after: set a time delay before messages

are sent.

Send size: select a maximum size of attached

items allowed for an MMS message.

•

MMS profiles: select a connection profile to be

used for MMS.

•

Receive settings: set up the following options for

receiving a multimedia message:

Current profile: select a profile.

Anonymous reject: reject messages from

unknown senders.

Profile settings: customise the following options

for each profile.

Advert allowed: accept advertisements.

Profile name: assign a name to the MMS

profile.

Report allowed: send a delivery report from the

network to the sender.

Server URL: enter the address of your MMS

server.

Home reception: determine if your phone

retrieves new messages automatically when you

are in your home service area.

Proxy: connect to the GPRS network using the

proxy server.

Roaming reception: determine if your phone

retrieves new messages automatically when you

are roaming in another network.

GPRS settings: customise the settings

required for connecting to the GPRS network.

Home reception and Roaming reception have the

following options:

IP address: (when the proxy is set to Enable)

enter the IP address.

Port: (when the proxy is set to Enable) enter

the port number.

•

Send settings: set up the following options for

sending an e-mail:

DNS1: (when the proxy is set to Disable

enter the primary address.

)

Send copy to self: send a copy of your e-mail to

your own e-mail address.

DNS2: (when the proxy is set to Disable

enter the secondary address.

)

Delivery confirm: set the network to inform you

when your e-mail has been delivered.

APN: enter the access point name used for the

address of the GPRS network.

Read confirm: send a request for a reply along

with your e-mail.

Priority: select a priority level of your e-mail.

Password: enter the password.

Include signature: attach your name, phone

number, or a simple memo to your e-mail.

Version: select the maximum file size of MMS

attachments.

Edit name: enter the name in your signature.

•

Block number: specify phone numbers from

which messages will not be accepted. Numbers

specified here are also included in the SMS

blocking list.

Edit telephone number: enter the phone number

in your signature.

Edit note: enter a simple memo in your signature.

•

Receive settings: set up the following options for

receiving e-mails:

Email (Menu 5.5.3)

Check interval: determine how often the phone

checks the server for incoming e-mails.

You can configure default network settings that are

required to send or receive e-mails.

You cannot change e-mail profile settings while an

e-mail is being sent or retrieved.

Menu functions

If you set this option to Not used, you can use the

Check new mail option to check your e-mail

manually.

Account settings: configure up to five e-mail

accounts using different e-mail servers. The

following options are available for each account:

Read reply: determine whether or not the phone

sends a read-reply request.

•

In use: activate the current e-mail account.

Account name: enter a name for the currently

selected account.

When this option is set to Announce, the phone

reminds you to send a read-reply request with

your e-mail address.

•

User name: enter a user name.

Email address: enter your e-mail address.

Reply address: enter an e-mail address to

which you want recipients to send reply

messages.

Retrieve option: determine whether or not the

phone retrieves headers only or the entire e-mail.

Delete option: determine whether e-mails are

deleted immediately or the next time you connect

to the server.

•

User ID: enter your e-mail ID.

Password: enter your e-mail password.

SMTP server: enter the IP address or domain

name of the outgoing e-mail server.

SMTP port: enter the SMTP port number.

Protocol type: select the protocol for the

incoming e-mail server. The remaining options

depend on the protocol type setting.

Reject if over: determine the maximum size for

incoming e-mails. Your phone will reject e-mails

that exceed the specified size.

•

Leave a copy of messages on the server: leave

copies of e-mails after retrieving.

•

Email account: set up an e-mail account and

select an account to be used.

The following options are available when the

protocol type is POP3

Current account: select an account.

•

POP3 server: enter the IP address or domain

name of the server that receives your e-mail.

POP3 port: enter the POP3 port number.

APOP login: connect to the server by using

the APOP login scheme when this option is

selected.

APN: enter the access point name.

•

Password: enter the password.

DNS1: enter the primary DNS address.

DNS2: enter the secondary DNS address.

•

Block list: specify the following e-mail blocking

lists.

These options are available when the protocol type

is IMAP4

Address list: specify e-mail addresses to reject

e-mails from those addresses.

•

IMAP4 server: enter the IP address or domain

name of the server that receives your e-mail.

IMAP4 port: enter the IMAP4 port number.

Include attachments: select this option to

receive attachments with e-mails.

Subject list: specify subjects to reject e-mails

which contain those subjects.

•

Push message (Menu 5.5.4)

•

Max. Emails retrieved: set the number of

headers you will retrieve from the server.

You can change the settings for receiving web push

messages from the wireless web server. The following

options are available:

•

Email profile: configure the network settings

required to send or receive e-mails.

•

Receive: set how your phone receives push

messages.

Current profile: select a profile.

Profile settings: configure up to five e-mail

profiles.

•

Service centre: enter the address of the server

from which you want to receive push messages,

when the Receive option is set to SMS-C

Profile name: enter a profile name.

specific

Menu functions

Broadcast messages (Menu 5.6)

Memory status (Menu 5.7)

The Cell Broadcast service delivers short messages on

various such as the weather or traffic.

Use this menu to view the maximum memory and

available memory for each message type. You can also

view the amount of memory currently in use in each

folder.

Use this menu to change the settings for the service

and access broadcast messages.

•

Read: open received messages.

The Temporary box saves network messages until

the phone is switched off.

Browser (Menu 6)

The web browser on your phone allows you to access

the wireless web. Using the web browser, you can

access up-to-date information and a wide variety of

media content, such as wallpapers, ringtones, and

music files.

The Archive box saves network messages

indefinitely. Press <Options> and select Save

when a text notification appears. The message is

saved in the Archive box.

•

Receive: enable or disable the reception of

broadcast messages.

To access this menu, press <Menu> in Idle mode and

select Browser

Channel: specify the channels from which you

receive broadcast messages.

Home (Menu 6.1)

When you select Respective channels, you can

set up a list of active CB channels.

Use this menu to connect your phone to the network

and load the homepage of the wireless web service

provider.

•

Language: select the language(s) in which

broadcast messages display.

Please contact your service provider for details.

Navigating with the web browser

Using web page options

From any web page, press [ ] to access the following

options:

Press

scroll through browser items

select a browser item

return to the previous page

return to the homepage

the Navigation keys.

•

Go to URL: enter the URL address of a website

and access the website.

> or [

Bookmarks: save URL address to quickly access

websites.

Back> or [

and hold [C].

Messaging: send SMS messages or view the

messages stored in the phone.

Using browser menu options

Press [ ] or select on the top of the screen to

access the following options:

Media album: access image, video, sound, and

music files stored in the phone’s memory.

Exiting the web browser

•

Back: go back to the previous page.

Home: go back to the homepage.

Exit: exit the web browser.

Press [ ] to exit the browser.

Bookmarks (Menu 6.2)

Reload: reload the current page.

Use this menu to save URL addresses in order to

quickly access websites.

Show URL: display the URL address of the current

web page.

Adding a bookmark

1. Select an empty location.

•

About ...: access version information for your web

browser.

Menu functions

2. Enter a name for the bookmark and press [Down].

Streaming settings (Menu 6.5)

3. Enter a URL address and press <Options> and

Use this menu to set up the connection profile for

accessing a video streaming server.

select Save

Accessing a bookmarked page

•

Name: enter a profile name.

Scroll to a bookmark item and press [

APN: enter the access point name of the video

streaming service.

Using bookmark options

•

ID: enter a user ID.

After saving an item, press <Options> to access the

following options:

Password: enter a password.

•

Go: access the bookmarked website.

Profile settings (Menu 6.6)

Edit: edit the name and address of the bookmark.

Delete: delete the selected bookmark.

Use this menu to set up servers for the web browser.

Contact your service provider for details about your

settings options.

Go to URL (Menu 6.3)

For each server, the following options are available:

Use this menu to manually enter the URL address of a

website and access the website.

•

Profile name: assign a name to the server profile.

Home URL: set the address of your homepage.

Clear cache (Menu 6.4)

Bearer: select a bearer for each type of network

address accessed.

Use this menu to clear the cache, a temporary

memory that stores recently accessed web pages.

•

Proxy: select whether or not the phone uses a

proxy server to launch the web browser. Your

service provider can tell you if your network

requires a proxy server, and they can give you the

appropriate settings.

Password: enter the password.

•

GSM settings: customise the following GSM

network settings:

When the proxy is set to Enable

Proxy IP: enter the web gateway address.

Proxy port: enter the port number.

Dial number: enter the PPP server phone number.

GPRS settings: customise the following GPRS

network settings:

When the proxy is set to Enable

Proxy IP: enter the web gateway address.

Password: enter the password.

Proxy port: enter the port number.

Data call type: select a data call type.

APN: enter the access point name of the GPRS

network gateway.

When the proxy is set to Disable

DNS1: enter the primary address.

DNS2: enter the secondary address.

Dial number: enter the PPP server phone number.

Password: enter the password.

When the proxy is set to Disable

DNS1: enter the primary address.

Password: enter the password.

DNS2: enter the secondary address

Data call type: select a data call type.

APN: enter the access point name of the GPRS

network gateway.

Menu functions

•

Download from a computer using the Samsung PC

Current profile (Menu 6.7)

Studio programꢀSamsung PC Studio User’s

Use this menu to activate one of the proxy servers you

have set up.

Guide

Via an active IrDA connection

ꢀp. 42

The downloaded or received files are stored in the

Music folder. p. 80

Applications (Menu 7)

ꢀ

Use this menu to play Java games, to play music files,

to record voice memos, to set time zones and alarms,

or to use the phone as a calculator, converter, timer, or

stopwatch.

Creating a play list

Add MP3 files to the play list.

1. From the MP3 player screen, press <Options

and select Add to list

To access this menu, press <Menu> in Idle mode and

2. Select either of the following options:

select Applications

•

Add all: add all of the files in the phone’s

memory to the play list.

Add a file: add specific files to the play list.

MP3 player (Menu 7.1)

Use this menu to enjoy music. First, you need to save

MP3 files in your phone’s memory.

3. If you selected Add a file, select a file and press

Add>. Repeat from step 2.

Downloading or receiving music files

4. Press <Back> to go back to the MP3 player

Use these methods to save MP3 files to your phone’s

memory:

screen.

•

Download from the wireless webꢀp. 66

•

Play: begin playback.

Playing music files

Send via: send the currently selected file via

e-mail or infrared port.

From the MP3 player screen, press [

During playback, use the following keys:

•

Open play list: display the play list.

Keys

Function

Set as: set the file as your alarm sound, ringtone,

or a caller alert melody for an Address book entry.

Pauses or resumes playback.

•

Delete: delete the selected file.

Left

Goes back to the previous file. Moves

backward in a file when held down.

Settings: change the default settings for playing

music files.

Right

Skips to the next file. Moves forward in a

file when held down.

Repeat mode: select a repeat mode.

Shuffle: set the MP3 player to play music in

random order.

Opens the play list.

Down

Stops playback.

Lock volume key: lock [ / ] to prevent

accidental key presses from affecting playback.

Changes the repeat mode.

Switches to shuffle mode.

Adjusts the volume level.

Volume: select a volume level.

•

Properties: access the file properties.

Accessing the play list

From the MP3 player screen, press [Up] to access the

play list.

Using MP3 file options

From the MP3 player screen, press <Options> to

access the following options:

Press <Options> to access the following options:

Menu functions

•

Play: play the currently selected file.

•

Send via: send the voice memo via MMS, e-mail,

or infrared port.

•

Add to list: add files to the play list.

Set as: set the file as your alarm sound, ringtone,

or a caller alert melody for an Address book entry.

Move list: move the selected file to the position

you want within the play list.

•

Delete: delete the voice memo.

•

Remove: remove the selected file or all files from

the play list.

Rename: change the name of the voice memo.

Move to favourite sounds: move the voice

memo to the Favourite sounds folder.

Voice recorder (Menu 7.2)

Use this menu to record voice memos. A voice memo

can be up to one hour long.

•

Protection: protect the voice memo from being

deleted.

Properties: access the properties of the voice

memo.

Recording a voice memo

1. Press [

] to start recording.

Playing a voice memo

2. Speak into the microphone.

1. From the Voice record screen, press <Options

Press [

] to pause or resume the recording.

and select Go to voice list

2. Select a voice memo. The memo plays.

On the player screen, you can use the following keys:

3. When you finish, press <Save> to save the voice

memo.

After recording a voice memo, press <Options> to

access the following options:

Keys

Function

•

Play: play back your voice memo.

Pauses or resumes playback.

Java world (Menu 7.3)

Keys

Left

Right

Function

Use this menu to access and play Java games and to

change the network settings for accessing Java

services.

Moves backward in a file.

Moves forward in a file.

Goes back to the Voice record screen.

Stops playback.

Using Java game options

From the Java world screen, select Downloads and

press <Options> to access the following options:

Down

Adjusts the volume.

•

Launch: launch the selected game.

Application settings: set a game to be continued

when a call comes in or an alarm sounds during

the game. You can also set the phone to exchange

game information with the network while playing

an online game or when you need to connect to

the Internet.

Using voice recorder options

From the Voice record screen, press <Options> to

access the following options:

•

Record: record a new voice memo.

Settings: change the default settings for

recording a voice memo.

•

Delete: delete the game.

Recording time: select a maximum recording

time.

Properties: access the game properties.

Playing Forgotten Warrior

1. From the Java world menu, select Downloads

Volume: select a volume level.

→

Default name: change the default prefix of the

voice memo.

Forgotten Warrior

2. Press any key.

•

Go to voice list: go to the voice memo list.

Menu functions

3. Press <PLAY>.

5. Press <NEXT> repeatedly and then <START>, or

SKIP> to start the game immediately.

4. Select START GAME or CONTINUE

During a game, press <OPTIONS> to access game

options.

5. Press <SKIP> to start a game.

During a game, press

game options.

<OPTIONS

to access

Changing Java settings

You can change the settings for accessing Java

services.

Playing Freekick

1. From the Java world menu, select Downloads

Freekick

2. Press any key.

3. Select Game

team a player.

→

1. From the Java world menu, select Settings

2. Change the following settings:

•

APN: enter the access point name.

Password: enter the password.

Proxy: select whether or not you use a proxy

server to access network services. Depending

on this setting, options in Proxy settings vary.

Proxy settings: provide you with the following

options:

→

the game mode you want

→

During a game, press

[

]

to access game options.

Playing Arch Angel

1. From the Java world menu, select Downloads

Arch Angel

→

•

2. Press any key.

When the proxy is set to Enable

3. Select NEW GAME or LOAD GAME

→

a game

IP address: enter the HTTP proxy address.

mode.

Port: enter the port number.

4. Press <NEXT> repeatedly and then <PLAY>.

When the proxy is set to Disable

Viewing and setting a foreign time zone

1. From the world map, press [Down].

DNS1: enter the primary DNS address.

2. Press [Left] or [Right] to select the foreign time

zone you want to view.

DNS2: enter the secondary DNS address.

3. You can use wap connection profile settings if APN

is blank.

3. Press <Options> and select Save to save the

time zone.

Checking memory status

Applying Daylight Savings Time

1. From the world map, press <Options> and select

You can view the amount of total and used memory for

Java games.

Set daylight saving time

From the Java world menu, select Memory status

2. Press [ ] to check the time zone(s) you want.

World time (Menu 7.4)

3. Press <Save>.

Use this menu to set your local time zone and find out

what time it is in another part of the world.

Alarm (Menu 7.5)

Use this menu to set alarms to sound at specific times.

Setting your local time zone

1. From the world map, press [Left] or [Right] to

select the city that corresponds to your home time

zone. As the time line moves, the time and date of

the given zone display.

Setting an alarm

1. Select the type of alarm.

2. Select On on the Alarm line and press [Down].

3. Enter the time for the alarm to sound and press

[Down].

2. Press <Options> and select Save to save the

time zone.

Menu functions

4. If necessary, select AM or PM in 12-hour time

If the phone is off when it is time for the alarm to ring,

the phone is switched on and sounds the alarm.

format and press [Down].

You can change the time format.ꢀp. 36

Calculator (Menu 7.6)

5. Select the days when the alarm rings.

6. Select the Alarm tone line.

7. Select an alarm melody.

8. Press <Save>.

Use this menu to perform basic arithmetic functions,

such as addition, subtraction, multiplication, and

division.

1. Enter the first number.

•

Press the left soft key to insert a decimal point

or bracket.

Stopping an alarm

•

When an alarm sounds, press <OK> or any key to

stop the alarm.

•

Press

[

] or [ ] to move the cursor.

2. Press one of the Navigation keys to access the

math function you want.

•

When a wake-up alarm sounds, press <OK> or

[

] to stop the alarm.

3. Enter the second number.

Otherwise, press <Snooze> or any key to stop

the alarm and cause it to sound again after 5

minutes. You can do this a maximum of five times.

4. Press [

] to view the result.

Convertor (Menu 7.7)

Setting the alarm to ring even if the phone is

off

Use this menu for common conversions, such as

currency and temperature.

From the Alarm screen, select Auto power

→

On.

1. Select a converter.

2. Press [Left] or [Right] to select the original unit

and press [Down].

Stopping the timer

•

Press any key when the timer rings.

3. Enter the value to be converted and press [Down].

Press [

] on the Timer screen to stop the timer

before it rings.

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature to above

zero (+) or below zero (-)

Stopwatch (Menu 7.9)

4. Press [Left] or [Right] to select the unit you want

to convert to.

Use this menu to measure elapsed time. The precision

of the stopwatch is one one-hundredth of a second.

The equivalent value for the amount you entered

displays.

1. Press [

2. Press [

] to start the stopwatch.

] to check an interval. You can repeat

this step for a total of 4 intervals.

Timer (Menu 7.8)

3. To reset the stopwatch, press <Reset>.

Use this menu to set a period of time for the phone to

count down. The phone will sound an alarm when the

specified period of time has expired.

Help (Menu 7.0)

Use this menu to view the on-screen user’s guide,

containing general customer information and specific

instructions for applications, such as e-mail, camera,

the web browser, and so on.

Starting the timer

1. Press <Set>.

2. Enter the length of time you want to count down

You can also set the main help screen to be displayed

automatically when the phone is switched on.

and press <OK>.

3. Press [

] to start counting down.

Menu functions

Images (Menu 8.1)

SIM AT (Menu 7.

)

This menu displays photos you have taken and images

downloaded or received in messages.

This menu is available if you use a SIM AT card that

provides additional services, such as news, weather,

sports, entertainment, and location services. Available

services may vary, depending on your service

provider’s plans. For details, see your SIM card

instructions or contact your service provider.

Viewing an image

1. Select an image folder.

2. Scroll to an image and press [

Using image options

While viewing an image or the image list, press

Media album (Menu 8)

The Media album menu allows you to access images,

videos, music files, and sound files stored in the

phone’s memory.

<Options> to access the options:

•

View: display the image.

•

List: show the image list.

•

Send via: send the image via MMS, e-mail, or

infrared port.

To access this menu, press <Menu> in Idle mode and

select Media album

•

Set as: set the image as your wallpaper or a caller

ID image for an Address book entry.

According to the DRM (Digital Rights Management)

system, web content may not be able to be

forwarded. The content is indicated by

Edit: add emoticons, frames, or effects to the

image.

•

Delete: delete the image or all images.

Rename: change the name of the image.

•

Move to favourite images: move the image to

the Favourite images folder.

Keys

Right

Down

Function

Moves forward in a file.

Stops playback.

Adjusts the volume.

Slide show: set all images to display as a slide

show. You can select a time interval between

images.

•

Protection: protect the image from being deleted.

Properties: access the image properties.

Using video options

While viewing the video list, press <Options> to

access the options:

Videos (Menu 8.2)

This menu displays video clips you have recorded,

downloaded, or received in messages.

•

Play: play the video clip.

Send via: send the video clip via MMS, e-mail, or

infrared port.

Playing a video clip

•

Delete: delete the video clip or all video clips.

1. Select a video folder.

Rename: change the name of the video clip.

2. Scroll to a clip and press [

Move to favourite videos: move the video clip to

the Favourite videos folder.

During playback, use the following keys.

Keys

Function

•

Protection: protect the video clip from being

deleted.

Pauses or resumes playback.

Moves backward in a file.

Properties: access the properties of the video

clip.

Left

Menu functions

Lock volume key: lock [ / ] to prevent

accidental key presses from affecting playback.

Music (Menu 8.3)

This menu displays MP3 files you have downloaded,

received in messages, or imported from your

computer.

Volume: select a volume level.

•

Rename: change the name of the file.

Protection: protect the file from being deleted.

Properties: access the file properties.

Playing a music file

Scroll to a file and press [

].ꢀp. 71

Using music options

Sounds (Menu 8.4)

While viewing the music list, press <Options> to

access the following options:

This menu displays sound files you have recorded,

downloaded, or received in messages.

•

Play: play the music file.

Playing a sound clip

1. Select a sound folder.

Send via: send the file via e-mail or infrared port.

Add play list: add the selected file to the play list.

2. Scroll to a clip and press [

].ꢀp. 72

Set as: set the file as your ringtone, alarm tone or

as a caller alert melody for an Address book entry.

Using sound options

While viewing the sound list, press <Options> to

access the following options:

•

Delete: delete the selected file or all files.

Settings: change the default settings for playing

music files.

•

Play: play the sound file.

Send via: send the file via MMS, e-mail, or

infrared port.

Repeat mode: select a repeat mode.

Shuffle: select a playing order.

•

Set as: set the file as your ringtone, alarm tone or

as a caller alert melody for an Address book entry.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

•

Delete: delete the selected file or all files.

Memory status (Menu 8.6)

Rename: change the name of the file.

You can check the total amount of memory for media

items and the amount of memory currently in use in

each media box.

Move to favourite sounds: move the sound clip

to the Favourite sounds folder.

•

Protection: protect the file from being deleted.

Properties: access the file properties.

Calendar (Menu 9)

Other files (Menu 8.5)

The Calendar feature enables you to keep track of

your schedule and to-do list, to view missed alarm

events.

Files that you receive but which are not supported by

your phone are stored in this folder. These

unsupported file formats include *.doc, *.hwp, *.ppt,

*.txt.

To access this menu, press <Menu> in Idle mode and

select Calendar

While viewing the file list, press <Options> to access

the following options:

Consulting the calendar

•

Send via: send the file via e-mail or infrared port.

Delete: delete the file or all files.

When you enter the Calendar menu, the calendar in

Month view appears with today’s date indicated by a

orange box.

Rename: change the name of the file.

Menu functions

The number of events for the specific day appears at

the bottom of the calendar. The following icons

indicate the type of event:

Creating an event

You can schedule up to 400 events on the calendar,

and schedule more than one event per day.

•

Scheduled event

To-do item

•

Anniversary

Entering a new scheduled event

1. Scroll to a date on the calendar.

Miscellaneous

Press <Options> to access the following options:

2. Press <Options> and select Create

or Miscellaneous

→

Schedule

•

View mode: change the view mode of the

calendar.

3. Enter information or change the settings in the

following entry fields:

•

Create: add a new event.

•

Subject: enter the title of the event.

Details: enter event details.

Start date and Start time: enter the starting

date and time for the event.

AM/PM: select AM or PM.

End date and End time: enter the ending date

and time for the event.

AM/PM: select AM or PM.

Location: (for Schedule) enter information

about the event location.

Go to: go to the current date or a specific date.

Sort by: sort items by the type of event.

Delete: delete items stored on the calendar by

using various deleting options.

•

Missed alarm events: view events whose alarms

you have missed.

Memory status: view the memory status for

items stored in the phone’s memory.

•

Alarm: set an alarm for the event.

•

before: set how long before the event the

alarm is to alert you.

•

Alarm time: enter the time for the alarm to

sound.

•

Alarm tone: select an alarm tone.

Repeat: (for Schedule) select to set the event

to recur and a repeat unit.

until: (for Schedule) if the event will recur,

set the ending date.

•

AM/PM: select AM or PM.

Alarm tone: select an alarm tone.

Repeat every year: select to set the phone to

remind you of the anniversary every year.

•

4. Press <Save> to save the event.

Entering a to-do item

1. Select a date on the calendar.

2. Press <Options> and select Create

Entering a new anniversary

1. Select a date on the calendar.

→

To do.

2. Press <Options> and select Create

→

3. Enter information or change the settings in the

following entry fields:

Anniversary

3. Enter information or change the settings in the

following entry fields:

•

To do: enter information about the item.

Start date: enter the starting date.

Due date: enter the ending date.

Priority: select a priority level.

•

Occasion: enter information about the

anniversary.

•

Date: enter the date.

Alarm: select to set an alarm for the

anniversary.

4. Press <Save> to save the event.

•

before: set how long before the event the

alarm is to alert you.

Menu functions

•

Missed alarm events: view events whose alarms

you have missed.

Viewing an event

Square brackets on a calendar date indicates the

events scheduled for that day.

Memory status: view the memory status for

items stored in the phone’s memory.

1. Select a date on the calendar to display the events

for the day.

Viewing an event in different mode

2. Select an event to view its details.

By default, the calendar appears in Month view mode.

While viewing an event or the event list, press

Press <Options> and select view mode to change the

mode.

Options> to access the following options:

View: display the event details.

Edit: edit the event.

•

Day view

•

You can view events for the selected date.

Select an event to view its details.

•

Create: add a new event.

•

Send via: send the event via SMS, MMS, e-mail,

or infrared port.

The following icons will be displayed according to the

event’s type and status:

•

View mode: change the view mode of the

calendar.

•

Alarm set

Done/Undone: mark the to-do item as done, or

not.

Recurring event

Completed to-do

•

Sort by: sort items by the type of events.

To-do priority;

: low

: high,

: normal, and

Delete: delete items stored on the calendar by

using various deleting options.

Week view

Solve problems

You can view events for the selected week.

Help and personal needs

A cell on the timetable indicates the presence of event

information.

To save the time and expense of an unnecessary service

call, perform the simple checks in this section before

contacting a service professional.

Select the cell that contains the event you want.

When you switch on your phone, the following

messages may appear:

Viewing a missed alarm event

When you are unable to acknowledge an alarm, the

phone displays a missed alarm notification.

“Insert SIM card”

•

Be sure that the SIM card is correctly installed.

“Phone lock”

The automatic locking function has been enabled.

1. Press <Options> and select Missed alarm

events

2. Select an event.

•

You must enter the phone’s password before you

can use the phone.

3. Press <Confirm> to confirm and delete the event.

“Enter PIN”

•

You are using your phone for the first time. You

must enter the PIN supplied with the SIM card.

•

The PIN check feature is enabled. Every time the

phone is switched on, the PIN has to be entered.

To disable this feature, use the PIN check menu.

Solve problems

“Enter PUK”

•

Be sure that you are accessing the correct cellular

network.

•

The PIN code has been entered incorrectly three

times in succession, and the phone is now blocked.

Enter the PUK supplied by your service provider.

Be sure that you have not set an incoming call

barring option.

“No Service,” “Network Failure,” or “Not

Done” displays

Your correspondent cannot hear you speaking

•

Be sure that you have switched on the

microphone.

•

The network connection has been lost. You may be

in a weak signal area. Move and try again.

•

Be sure that you are holding the phone close

enough to your mouth. The microphone is located

at the bottom of the phone.

•

You are trying to access an option for which you

have no subscription with your service provider.

Contact the service provider for further details.

The phone starts beeping and “Battery low”

flashes on the display

You have entered a number but it was not

dialled

•

Your battery is insufficiently charged. Recharge the

battery.

•

Be sure that you have pressed [ ].

Be sure that you have accessed the right cellular

network.

The audio quality of the call is poor

•

Check the signal strength indicator on the display

). The number of bars indicates the signal

strength from strong ( ) to weak ( ).

•

Be sure that you have not set an outgoing call

barring option.

(

•

Try moving the phone slightly or moving closer to a

window if you are in a building.

Your correspondent cannot reach you

•

Be sure that your phone is switched on. ([

pressed for more than one second.)

]

No number is dialled when you re-call a

Address entry

Health and safety information

•

Use the Contacts list feature to ensure the number

has been stored correctly.

SAR certification information

This phone meets European Union (EU) requirements

concerning exposure to radio waves.

•

Re-store the number, if necessary.

The battery doesn't charge properly or the

phone sometimes turns itself off

Your mobile phone is a radio transmitter and receiver. It is

designed and manufactured to not exceed the limits for

exposure to radio-frequency (RF) energy, as

•

Wipe the charging contacts both on the phone and

on the battery with a clean soft cloth.

recommended by the EU Council. These limits are part of

comprehensive guidelines and establish permitted levels

of RF energy for the general population. The guidelines

were developed by independent scientific organisations

through the periodic and thorough evaluation of scientific

studies. The limits include a substantial safety margin

designed to ensure the safety of all persons, regardless of

age and health.

If the above guidelines do not help you to

solve the problem, take note of:

•

The model and serial numbers of your phone

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung after-sales

service.

The exposure standard for mobile phones employs a unit

of measurement known as Specific Absorption Rate (SAR).

The SAR limit recommended by the EU Council is

2.0 W/kg.^*

The highest SAR value for this model phone was 0.476

W/kg.

Health and safety information

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest certified

power level, the actual SAR level of the phone while

operating can be well below the maximum value. This is

because the phone is designed to operate at multiple

power levels so as to use only the power required to reach

the network. In general, the closer you are to a base

station, the lower the power output of the phone.

Precautions when using batteries

•

Never use a charger or battery that is damaged in any

way.

•

Use the battery only for its intended purpose.

If you use the phone near the network’s base station,

it uses less power. Talk and standby time are greatly

affected by the signal strength on the cellular network

and the parameters set by the network operator.

•

Battery charging time depends on the remaining

battery charge, the type of battery, and the charger

used. The battery can be charged and discharged

hundreds of times, but it will gradually wear out. When

the operation time is noticeably shorter than normal, it

is time to buy a new battery.

Before a new model phone is available for sale to the

public, compliance with the European R&TTE Directive

must be shown. This directive includes as one of its

essential requirements the protection of the health and

safety of the user and any other person.

•

If left unused, a fully charged battery will discharge

itself over time.

Use only Samsung-approved batteries, and recharge

your battery only with Samsung-approved chargers.

Disconnect the charger from the power source when it

is not in use. Do not leave the battery connected to a

charger for more than a week, since overcharging may

shorten its life.

The SAR limit for mobile phones used by the public is 2.0

watts/kilogram (W/kg) averaged over ten grams of body tis-

sue. The limit incorporates a substantial margin of safety to

give additional protection for the public and to account for any

variations in measurements. The SAR values may vary,

depending on national reporting requirements and the network

band.

•

Extreme temperatures will affect the charging capacity

of your battery: it may require cooling or warming

first.

Do not leave the battery in hot or cold places because

the capacity and lifetime of the battery will be

reduced. Try to keep the battery at room temperature.

A phone with a hot or cold battery may not work

temporarily, even when the battery is fully charged.

Li-ion batteries are particularly affected by

Road safety

Your wireless phone gives you the powerful ability to

communicate by voice, almost anywhere, anytime. But an

important responsibility accompanies the benefits of

wireless phones, one that every user must uphold.

When you are driving a car, driving is your first

responsibility. When using your wireless phone while

driving, follow local regulations in the country or region

you are in.

temperatures below 0°C (32°F).

•

Do not short-circuit the battery. Accidental short-

circuiting can occur when a metallic object like a coin,

clip or pen causes a direct connection between the +

and – terminals of the battery (metal strips on the

battery). For example, do not carry a spare battery in

a pocket or bag where the battery may contact metal

objects. Short-circuiting the terminals may damage

the battery or the object causing the short-circuiting.

Operating environment

Remember to follow any special regulations in force in the

area you are in, and always switch off your phone

whenever it is forbidden to use it, or when it may cause

interference or danger.

When connecting the phone or any accessory to another

device, read its user’s guide for detailed safety

instructions. Do not connect incompatible products.

Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

As with other mobile radio transmitting equipment, users

are advised that for the satisfactory operation of the

equipment and for the safety of personnel, it is

recommended that the equipment should only be used in

the normal operating position (held to your ear with the

antenna pointing over your shoulder).

Health and safety information

Other medical devices

Electronic devices

If you use any other personal medical devices, consult the

manufacturer of your device to determine if it is

adequately shielded from external RF energy.

Most modern electronic equipment is shielded from radio

frequency (RF) signals. However, certain electronic

equipment may not be shielded against the RF signals

from your wireless phone. Consult the manufacturer to

discuss alternatives.

Your physician may be able to assist you in obtaining this

information.

Switch off your phone in health care facilities when

regulations posted in these areas instruct you to do so.

Pacemakers

Pacemaker manufacturers recommend that a minimum

distance of 15 cm (6 inches) be maintained between a

wireless phone and a pacemaker to avoid potential

interference with the pacemaker. These recommendations

are consistent with the independent research and

recommendations of Wireless Technology Research. If you

have any reason to suspect that interference is taking

place, switch off your phone immediately.

Vehicles

RF signals may affect improperly installed or inadequately

shielded electronic systems in motor vehicles. Check with

the manufacturer or its representative regarding your

vehicle.

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Hearing aids

Posted facilities

Some digital wireless phones may interfere with some

hearing aids. In the event of such interference, you may

wish to consult your hearing aid manufacturer to discuss

alternatives.

Switch off your phone in any facility where posted notices

require you to do so.

Potentially explosive environments

Emergency calls

Switch off your phone when in any area with a potentially

explosive atmosphere, and obey all signs and instructions.

Sparks in such areas could cause an explosion or fire

resulting in bodily injury or even death.

This phone, like any wireless phone, operates using radio

signals, wireless, and landline networks as well as user-

programmed functions, which cannot guarantee

connection in all conditions. Therefore, you should never

rely solely on any wireless phone for essential

Users are advised to switch off the phone while at a

refuelling point (service station). Users are reminded of

the need to observe restrictions on the use of radio

equipment in fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting operations are

in progress.

communications like medical emergencies.

To make or receive calls, the phone must be switched on

and in a service area with adequate signal strength.

Emergency calls may not be possible on all wireless phone

networks or when certain network services and/or phone

features are in use. Check with local service providers.

Areas with a potentially explosive atmosphere are often

but not always clearly marked. They include the areas

below decks on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas, such as

propane or butane, areas where the air contains chemicals

or particles, such as grain, dust or metal powders, and any

other area where you would normally be advised to turn

off your vehicle engine.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your present

location. Emergency numbers vary by location.

3. Press

[

Certain features like Call Barring may need to be

deactivated before you can make an emergency call.

Consult this document and your local cellular service

provider.

Health and safety information

Other important safety information

Care and maintenance

•

Only qualified personnel should service the phone or

install the phone in a vehicle. Faulty installation or

service may be dangerous and may invalidate any

warranty applicable to the device.

Check regularly that all wireless phone equipment in

your vehicle is mounted and operating properly.

Do not store or carry flammable liquids, gases, or

explosive materials in the same compartment as the

phone, its parts, or accessories.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for many

years.

•

Keep your phone and all its parts and accessories out

of the reach of small children and pets. They may

inadvertently damage these things or choke on small

parts.

•

For vehicles equipped with an air bag, remember that

an air bag inflates with great force. Do not place

objects, including installed or portable wireless

equipment, in the area over the air bag or in the air

bag deployment area. Improperly installed wireless

equipment could result in serious injury if the air bag

inflates.

Switch off your phone before boarding an aircraft. It is

dangerous and illegal to use wireless phones in an

aircraft because they can interfere with the operation

of the aircraft.

•

Keep the phone dry. Precipitation, humidity, and

liquids contain minerals that corrode electronic

circuits.

Do not use the phone with a wet hand. Doing so may

cause an electric shock to you or damage to the

phone.

Do not use or store the phone in dusty, dirty areas, as

its moving parts may be damaged.

Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt certain

plastics.

•

Failure to observe these instructions may lead to the

suspension or denial of telephone services to the

offender, or legal action, or both.

•

Do not store the phone in cold areas. When the phone

warms up to its normal operating temperature,

moisture can form inside the phone, which may

damage the phone’s electronic circuit boards.

Do not drop, knock, or shake the phone. Rough

handling can break internal circuit boards.

Do not use harsh chemicals, cleaning solvents, or

strong detergents to clean the phone. Wipe it with a

soft cloth slightly dampened in a mild soap-and-water

solution.

•

Use only the supplied or an approved replacement

antenna. Unauthorised antennas or modified

accessories may damage the phone and violate

regulations governing radio devices.

If the phone, battery, charger, or any accessory is not

working properly, take it to your nearest qualified

service facility. The personnel there will assist you, and

if necessary, arrange for service.

•

Do not paint the phone. Paint can clog the device’s

moving parts and prevent proper operation.

Do not put the phone in or on heating devices, such as

a microwave oven, stove, or radiator. The phone may

explode when overheated.

•

When the phone or battery gets wet, the label

indicating water damage inside the phone changes

colour. In this case, phone repairs are no longer

guaranteed by the manufacturer's warranty, even if

the warranty for your phone has not expired.

Do not use the flash or light on the phone too close to

the eyes of people or animals. This may cause damage

to their eyes.

Connection tone • 39

Converter • 76

Creating calendar

anniversaries • 83

events • 82

tasks • 83

Creating messages

e-mail • 53

Diverting, calls • 39

DTMF tones, send • 28

Index

Calculator • 76

Calendar • 81

Call costs • 31

Call records

Address book

E-mails

copying • 32

deleting • 35

editing • 32

managing • 35

options • 32

speed-dialling • 34

creating/sending • 53

deleting • 59

setting • 63

dialled • 30

missed • 30

received • 30

Call time • 30

Caller group, managing • 34

Caller ID • 41

Calls

viewing • 58

MMS • 52

SMS • 51

Emergency calls • 91

External speaker • 26

Alarm • 75

Answering

call • 25

second call • 26

Anykey answer • 37

Auto redial • 37

Deleting

answering • 25

barring • 40

diverting • 39

holding • 26

redialling • 24

rejecting • 25

transferring • 27

waiting • 40

FDN (Fixed Dialling Number)

mode • 43

Address book • 35

call records • 30

e-mails • 59

MMS 55

photos • 47

SMS • 54

Forwarding

e-mails • 59

MMS • 55

SMS • 55

Backlight time, set • 38

Band selection • 41

Barring, calls • 40

Battery

video clips • 50

Delivery reports, message •

56, 61

Dialled calls • 30

Dialling font colour • 38

Display

Games • 73

Camera

photos • 44

videos • 48

charging • 7

Health and safety • 87

Help • 77

low indicator • 8

precautions • 88

Broadcast messages • 66

Browser, web • 66

CB (Cell Broadcast) messages •

Characters, enter • 22

Conference call • 28

Holding, call • 26

icons • 10

language • 36

settings • 37

Address book • 35

downloaded items • 81

phone • 44

Photos

deleting • 47

Icons, description • 10

Images, downloaded • 78

Inbox, messages

e-mail • 58

Name card • 34

Names

taking • 44

viewing • 47

PIN, change • 43

PIN2, change • 44

Power on/off tone • 39

Privacy • 43

Message tone • 38

Messages

e-mail • 53

entering • 22

searching • 31

Network band, select • 41

Network selection • 41

Network services • 39

MMS • 55

SMS • 55

MMS • 52

SMS • 51

web • 56, 65

Infrared, connect • 42

International calls • 24

Internet • 66

Problems, solve • 85

Minute minder • 39

Missed alarm events • 85

Missed calls

call record • 30

MMS messages

creating/sending • 52

deleting • 55

setting • 61

viewing • 54

MP3 player

options • 71

playing • 71

Multi-party calls • 28

Music, downloaded • 80

Muting

Outbox, messages • 56

Own number • 35

Received calls • 30

Received message

cell broadcast • 66

e-mail • 58

Key tone volume • 38

Keypad tones

sending • 27

setting • 38

Password

barring • 40

phone • 43

Phone

MMS • 55

SMS • 55

web • 56

Language, select • 36

Last number, redial • 24

Locking

care and maintenance •

display • 10

icons • 10

locking • 43

password • 43

resetting • 44

switching on/off • 8

unpacking • 6

Recording

videos • 48

voice memos • 72

Redialling

automatically • 37

manually • 24

Resetting phone • 44

Ringer

media content • 43

phone • 43

SIM card • 43

Low battery indicator • 8

key tones • 27

microphone • 27

incoming calls • 38

messages • 38

Media album • 78

Memory status

Index

Road safety • 89

Roaming • 41

Text input mode, change • 22

Text, enter • 22

Timer • 77

Tone

Safety

connect • 39

information • 87

keypad • 38

SDN (Service Dialling Num-

bers) • 36

Security, calls • 42

Sent messages • 57

SIM card

message • 38

minute minder • 39

power on/off • 39

slide • 39

inserting • 7

locking • 43

Videos

SMS messages

deleting • 50

playing • 50

recording • 48

Voice memos

playing • 72

recording • 72

creating/sending • 51

deleting • 54

Sound settings • 38

Sounds, downloaded • 80

Speed-dial • 34

Stopwatch • 77

Switching on/off

microphone • 27

phone • 8

Waiting call • 40

Web browser

access • 66

bookmarks • 67

cache, clear • 68

World time • 75

Templates

MMS • 60

SMS • 60

Sony CDX A251C User Manual
Seagate ST903204EXD101 RK User Manual
Seagate MOMENTUS THIN ST320LT007 9ZV142 User Manual
Seagate Barracuda ST3200826A User Manual
Seagate Backup Plus STBU750100 User Manual
Samsung Spinpiont HD160HJ User Manual
Samsung GT I8160L User Manual
Roberts Radio CR9920 User Manual
Panasonic X70 User Manual
Oregon Scientific RRM612PA User Manual