Samsung SGH C200S User Manual

* Some of the contents in this manual may differ from your  
phone, depending on the software installed or your service  
provider.  
ELECTRONICS  
Printed in Korea  
Code No.: GH68-06114A  
English. 10/2004. Rev. 1.0  
World Wide Web  
http://www.samsungmobile.com  
Contents  
Important safety precautions........................... 7  
Unpacking ........................................................ 9  
Your phone..................................................... 10  
Phone layout........................................................... 10  
Display................................................................... 13  
Getting started............................................... 17  
Installing the SIM card ............................................. 17  
Charging the battery................................................ 19  
Switching the phone on or off.................................... 21  
Selecting functions and options.................................. 22  
Locking or unlocking the keypad................................ 24  
Call functions ................................................. 25  
Making a call........................................................... 25  
Adjusting the volume ............................................... 27  
Answering a call ...................................................... 28  
Viewing missed calls ................................................ 28  
Quickly switching to silent mode ................................ 30  
Options during a call ...................................... 31  
Putting a call on hold................................................ 31  
Using the menu functions ......................................... 32  
Switching the microphone off (Mute).......................... 32  
Muting/Sending key tones......................................... 33  
Sending DTMF tones ................................................ 34  
Searching for a number in Phonebook ........................ 34  
Answering a second call............................................ 35  
Making a multi-party call .......................................... 36  
Entering text .................................................. 38  
Changing the text input mode ................................... 39  
Using T9 mode........................................................ 40  
Using alphabet mode................................................ 42  
Using number mode................................................. 43  
Using symbol mode.................................................. 44  
Using the menus ............................................ 45  
Accessing a menu function by scrolling ....................... 45  
Accessing a menu function by using its shortcut........... 46  
List of menu functions .............................................. 47  
3
Contents  
Phonebook ..................................................... 52  
Storing a number with a name .................................. 52  
Using Phonebook entry options.................................. 55  
Searching for a number in Phonebook ........................ 57  
Editing a caller group ............................................... 59  
Speed-dialling ......................................................... 60  
Deleting all Phonebook entries................................... 61  
Checking memory status .......................................... 62  
Using service dialling numbers................................... 63  
Text messages ............................................... 64  
Inbox (Menu 1.1) ..................................................... 64  
Outbox (Menu 1.2) ................................................... 65  
Write new (Menu 1.3) ............................................... 66  
Templates (Menu 1.4) ............................................... 69  
Settings (Menu 1.5).................................................. 70  
Delete all (Menu 1.6) ................................................ 71  
Memory status (Menu 1.7)......................................... 72  
Voice mail (Menu 1.8) ............................................... 72  
Broadcast (Menu 1.9)................................................ 73  
Multimedia messages ..................................... 75  
Inbox (Menu 2.1) ..................................................... 75  
Outbox (Menu 2.2) ................................................... 78  
Draft (Menu 2.3) ...................................................... 79  
Write new (Menu 2.4) ............................................... 79  
Templates (Menu 2.5) ............................................... 83  
Delete all (Menu 2.6) ................................................ 84  
Memory status (Menu 2.7)......................................... 84  
Setup (Menu 2.8) ..................................................... 85  
MMS profile (Menu 2.9) ............................................. 86  
Call records .................................................... 87  
Missed calls (Menu 3.1) ............................................. 87  
Received calls (Menu 3.2).......................................... 88  
Dialled calls (Menu 3.3)............................................. 88  
Delete all (Menu 3.4) ................................................ 89  
Call time (Menu 3.5) ................................................. 89  
Call cost (Menu 3.6).................................................. 90  
Sound settings ............................................... 91  
Ring tone (Menu 4.1) ................................................ 91  
Ring volume (Menu 4.2) ............................................ 91  
Alert type (Menu 4.3)................................................ 92  
4
Contents  
Keypad tone (Menu 4.4)............................................ 92  
Message tone (Menu 4.5) .......................................... 93  
Alert on call (Menu 4.6)............................................. 94  
Power on/off (Menu 4.7)............................................ 94  
Extra tones (Menu 4.8).............................................. 95  
Phone settings ............................................... 96  
Display settings (Menu 5.1) ....................................... 96  
Greeting message (Menu 5.2) .................................... 98  
Own number (Menu 5.3)............................................ 98  
Language (Menu 5.4)................................................ 99  
Security (Menu 5.5).................................................. 99  
Extra settings (Menu 5.6) ........................................ 103  
Short cut (Menu 5.7)............................................... 104  
Reset settings (Menu 5.8)........................................ 104  
Organiser ..................................................... 105  
Alarm (Menu 6.1) ................................................... 105  
Calendar (Menu 6.2) ............................................... 106  
Time & Date (Menu 6.3) .......................................... 109  
Calculator (Menu 6.4).............................................. 110  
To do list (Menu 6.5)............................................... 110  
Voice memo (Menu 6.6) .......................................... 113  
Currency exchange (Menu 6.7)................................. 115  
Network services.......................................... 116  
Call diverting (Menu 7.1) ......................................... 116  
Call barring (Menu 7.2) ........................................... 118  
Call waiting (Menu 7.3) ........................................... 120  
Network selection (Menu 7.4)................................... 121  
Caller ID (Menu 7.5) ............................................... 122  
Closed user group (CUG) (Menu 7.6)......................... 122  
Funbox ......................................................... 125  
WAP browser (Menu 8.1) ......................................... 125  
Games (Menu 8.2).................................................. 132  
Sounds (Menu 8.3) ................................................. 134  
Images (Menu 8.4) ................................................. 134  
Delete all (Menu 8.5) .............................................. 135  
Memory status (Menu 8.6)....................................... 135  
SIM AT ......................................................... 136  
5
Contents  
Solving problems.......................................... 137  
Access codes ................................................ 140  
Phone password .................................................... 140  
PIN...................................................................... 141  
PUK ..................................................................... 141  
PIN2 .................................................................... 142  
PUK2 ................................................................... 142  
Barring password................................................... 143  
Health and safety information...................... 144  
SAR certification information ................................... 144  
Precautions when using batteries............................. 145  
Road safety .......................................................... 147  
Operating environment........................................... 147  
Electronic devices .................................................. 148  
Potentially explosive environments........................... 150  
Emergency calls .................................................... 151  
Other important safety information .......................... 152  
Care and maintenance............................................ 153  
Glossary ....................................................... 155  
Index ........................................................... 160  
Quick reference card .................................... 165  
6
Important safety  
precautions  
Read these guidelines before using your wireless  
phone. Failure to comply with them may be  
dangerous or illegal.  
Road safety at all times  
Do not use a hand-held phone while driving; park  
the vehicle first.  
Switching off when refuelling  
Do not use the phone at a refuelling point (service  
station) or near fuels or chemicals.  
Switching off in aircraft  
Wireless phones can cause interference. Using them  
in aircraft is both illegal and dangerous.  
Switching off near all medical equipment  
Switch off your phone near the medical equipment.  
Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF  
energy. Follow any regulations or rules in force.  
Interference  
All wireless phones may be subject to interference,  
which could affect their performance.  
Special regulations  
Meet any special regulations in force in any area and  
always switch off your phone whenever it is  
forbidden to use it, or when it may cause  
interference or danger (in a hospital for example).  
Water resistance  
Your phone is not water-resistant. Keep it dry.  
7
Important safety precautions  
Sensible use  
Use only in the normal position (held to the ear).  
Avoid unnecessary contact with the antenna when  
the phone is switched on, especially when the phone  
is in service.  
Emergency call  
Key in the emergency number for your present  
location, then press the  
key. Give all the  
necessary information as accurately as possible. Do  
not cut off the call until given permission to do so.  
Keeping small children away from your phone  
Keep the phone and all its parts including  
accessories out of the reach of small children.  
Accessories and batteries  
Use only Samsung-approved accessories. Use of any  
unauthorised accessories could damage your phone  
and may be dangerous.  
Use only Samsung-approved batteries and recharge  
your battery only with Samsung-approved chargers.  
Qualified service  
Only qualified service personnel may install or repair  
your phone.  
For more detailed safety information, see “Health  
and safety information” on page 144.  
CAUTION  
RISK OF EXPLOSION IF A BATTERY IS REPLACED  
BY AN INCORRECT TYPE.  
DISPOSE USED BATTERIES ACCORDING  
TO THE INSTRUCTIONS.  
8
Unpacking  
Your package contains the following items:  
Travel Adapter  
Phone  
Battery  
Owner’s Manual  
Note: The items supplied with your phone may be  
different depending on the country.  
In addition, you can obtain the following  
accessories for your phone from your local  
Samsung dealer:  
• Headset  
• Simple hands-free kit  
• Cigarette lighter adapter  
• Finger strap  
• Data kit  
9
Your phone  
Phone layout  
The following illustrations show the main elements  
of your phone:  
Earpiece  
Ear-  
microphone  
jack  
Main display  
Volume/Menu  
browse keys  
Navigation keys  
(Up/Down/Left/  
Right)  
Soft key (left)  
Soft key (right)  
WAP Browser  
key  
Power On/Off /  
Menu exit key  
Dial/Menu  
confirmation  
key  
Alphanumeric  
keys  
Cancel/Back/  
Correction key  
Microphone  
Special  
function keys  
Charger Connector  
10  
Your phone  
Key(s)  
Description  
Perform the functions indicated by the  
text above them, on the bottom line of  
the display.  
(soft keys)  
In menu mode, scrolls through the  
menu options and Phonebook memory  
with the Up and Down key; return to  
the previous menu level with the Left  
key and select the current menu with  
the Right key.  
In idle mode, allows you to access  
your favourite menu options directly.  
For further details about shortcuts, see  
page 104.  
In idle mode, launches the WAP  
(Wireless Application Protocol)  
browser.  
Initiates or answers a call.  
In idle mode, accesses the call log list.  
In menu mode, selects a menu  
function or stores information that you  
have entered, such as a name in the  
phone or SIM memory.  
Deletes characters from the display.  
In menu mode, returns to the previous  
screen.  
Ends a call.  
When held down, switches the phone  
on or off.  
In menu mode, cancels your input and  
returns to idle mode.  
11  
Your phone  
Key(s)  
Description (continued)  
When held down in idle mode, quickly  
accesses your voice mail server.  
Enter numbers, letters and some  
special characters.  
Used for various purposes in different  
functions.  
When held down while entering a  
phone number, the  
pause.  
key enters a  
When held down in idle mode, the  
key enters or exits the silent mode and  
key enters the key lock mode.  
(on the left side of the phone)  
During a call, adjusts the earpiece  
volume.  
In idle mode, adjusts the keypad tone  
volume.  
In menu mode, scrolls through the  
menu options and the Phonebook  
memory.  
12  
Your phone  
Display  
Display layout  
The main display has three areas:  
Icons  
Text and  
graphic area  
Soft keys  
Indications  
Menu  
Name  
Area  
Description  
First line  
Displays various icons. See  
page 14.  
Middle  
Displays messages, instructions  
and any information that you  
enter, such as a number to be  
dialled.  
Last line  
Shows the functions currently  
assigned to the two soft keys.  
13  
Your phone  
Icons  
Icon Description  
Shows the received signal strength. The  
more bars, the stronger the signal.  
Appears when a call is in progress. When  
your SIM card supports ALS (Alternate  
Line Service), this icon may appear with  
the number 1, 2, or both.  
For example  
,
, or  
.
Appears when you are out of a service  
area. When it displays, you cannot make  
or receive calls.  
Appears when you have new or  
unchecked voice messages. When your  
SIM card supports ALS (Alternate Line  
Service), this icon may appear as  
,
,
.
Appears when you have new or unread  
messages.  
Appears when you have new or  
unchecked multimedia messages that  
have been received.  
Appears when you set an alarm to sound  
at a specified time.  
Appears when mute mode is active.  
14  
 
Your phone  
Icon Description (continued)  
Appears when the call diverting feature is  
activated.When your SIM card supports  
ALS (Alternate Line Service), this icon  
may appear with the number 1, 2, or  
both. For example  
,
, or  
.
Appears when you are out of your home  
area and have logged onto a different  
network; for example, when travelling in  
other countries.  
Appears when you are connected to a  
GPRS-enabled network.  
Appears when you are in your home zone.  
(Only if your service provider supports this.)  
Appears when you are in your office zone.  
(Only if your service provider supports this.)  
Appears when you set the alert type for  
incoming calls to Vibration or  
Vibra+melody. For further details, see  
page 92.  
Appears when the silent mode is active.  
Shows the level of your battery. The more  
bars you see, the more power you have  
left.  
15  
Your phone  
Backlight  
A backlight illuminates the display and the keypad.  
When you press any key, the backlight turns on and  
remains on for a given period of time, depending on  
the Backlight option settings. The display turns off  
after one minute to conserve your battery power.  
To specify the length of time the backlight is active,  
set the Backlight option settings (Menu 5.1.5).  
See page 97 for further details.  
16  
Getting started  
Installing the SIM card  
When you subscribe to a cellular network, you are  
provided with a plug-in SIM card loaded with your  
subscription details, such as your PIN, any optional  
services available, and so on.  
Important! The plug-in SIM card and its contacts  
can be easily damaged by scratches  
or bending, so be careful when  
handling, inserting, or removing the  
card.  
Keep all SIM cards out of the reach of  
small children.  
1. If necessary, switch off the phone by holding  
down the  
displays.  
key until the power-off image  
2. Remove the battery. To do so:  
Press and hold down the catch above the  
battery on the back of the phone.  
Slide the battery away, as shown.  
17  
Getting started  
3. Slide the SIM card into the SIM card socket, as  
shown, so that it locks the card into position.  
Make sure the gold contacts of the card face into  
the phone.  
Note: When you need to remove the SIM card,  
slide it out, as shown, and remove it from  
the socket.  
4. Place the battery back on the phone. Make sure  
each side tab of the battery is aligned with the  
corresponding slot on the phone.  
18  
Getting started  
5. Slide the battery up towards the catch until it  
locks into place.  
Charging the battery  
Your phone is powered by a rechargeable Li-ion  
battery. A travel adapter comes with your phone for  
charging the battery. Use only approved batteries  
and chargers. Ask your local Samsung dealer for  
further details.  
The travel adapter allows you to use the phone  
while the battery is charging, but this causes the  
phone to charge more slowly.  
Note: You must fully charge the battery before using  
your phone for the first time. A discharged  
battery is fully recharged in approximately  
200 minutes.  
1. With the battery in position on the phone, plug  
the travel adapter connector into the jack at the  
bottom of the phone.  
19  
Getting started  
2. Plug the adapter into a standard AC wall outlet.  
While charging, the battery icon at the top right  
corner of the display repeatedly fills to show that  
the battery is charging.  
3. When charging is finished, the battery icon  
becomes solid and the “Fully charged” message  
is displayed, unplug the adapter from the power  
outlet and from the phone by pressing the gray  
tabs on both sides of the connector and pulling  
the connector out.  
Note: You must unplug the adapter before removing  
the battery from the phone during charging;  
otherwise, the phone could be damaged.  
Low battery indicator  
When the battery is weak and only a few minutes of  
talk time remain, the battery sensor informs you in  
the following ways: an empty battery icon flashes  
(
), you hear a warning tone, and a message  
repeats at regular intervals on the display.  
When the battery becomes too weak for the phone  
to operate, it switches off automatically.  
20  
Getting started  
Switching the phone on or off  
To switch the phone on:  
1. Hold down the  
on.  
key until the phone switches  
2. If the phone asks you to enter the phone  
password, enter the password and press the OK  
soft key. The phone password is preset to  
“00000000” at the factory. For further details,  
see page 140.  
The phone searches for your network and the  
current date and time appear on the display.  
Once connected to a network, you can make and  
receive calls.  
Service Provider  
07:30  
Wed 06 Mar  
Menu  
Name  
Note: To change the language, use the  
Language menu option (Menu 5.4).  
For further details, see page 99.  
To switch the phone off:  
Hold down the  
displays.  
key until the power-off image  
21  
Getting started  
Selecting functions and options  
Your phone offers a set of functions that allows you  
to customise your phone. These functions are  
arranged in menus and sub-menus, accessed via  
the two soft keys marked  
and  
. Each menu  
and sub-menu allows you to view and alter the  
settings of a particular function.  
The roles of the soft keys vary according to the  
function you are currently using; the label on the  
bottom line of the display, just above the soft keys,  
indicates its current role.  
Example:  
Service Provider  
07:30  
Wed 06 Mar  
Menu  
Name  
Press the right soft  
key to access the  
Phonebook feature.  
Press the left soft  
key to access  
menu functions.  
22  
Getting started  
To view various functions/options available, or  
select the one you want:  
1. Press the appropriate soft key.  
2. To  
select the:  
Press the  
Select soft key or  
Right key.  
• function displayed  
• option highlighted  
view the next function or Down key or  
key  
highlight the next option on the left side of  
on a list  
the phone.  
move back to the  
previous function or  
option on a list  
Up key or key on  
the left side of the  
phone.  
move back up one level Left key,  
soft key,  
in the structure  
or  
C
key.  
return to idle mode  
key.  
In some functions, you may be asked for a  
password or PIN. Enter the required code and press  
the OK soft key.  
Note: When you access a list of options, your phone  
highlights the current option. If, however, there  
are only two options, such as On/Off or  
Enable/Disable, your phone highlights the  
option that is not currently active so that you  
can select it directly.  
23  
Getting started  
Locking or unlocking the keypad  
You can lock the keypad to avoid pressing keys by  
mistake.  
To lock the keypad manually, press and hold the  
key in idle mode until the “Key pad locked”  
message displays.  
To lock the keypad automatically, use the Auto key  
lock option (Menu 5.1.3). See page 97.  
In the key lock mode, you can dial emergency calls  
and answer incoming call using the keypad.  
When you end the call, your phone returns to the  
key lock mode after a given period time.  
To exit key lock mode, press the Unlock soft key  
and then press the  
key.  
The “Keypad active” message displays.  
24  
Call functions  
Making a call  
When the idle screen displays, enter the area code  
and phone number, and press the key.  
Note: When you check the Auto redial option in the  
Extra settings menu (Menu 5.6), the phone  
automatically redials up to ten times when the  
person does not answer the call or is already  
on the phone. See page 103 for further details.  
Making an international call  
1. Press and hold the  
0
key.  
The character appears.  
+
2. Enter the country code, area code and phone  
number and press the  
key.  
Correcting the number  
To clear  
Press the  
C key.  
the last digit  
displayed  
any other digit in Navigation keys until the cursor  
the number  
is immediately to the right of  
the digit to be cleared. Press  
the  
C
key. You can also insert a  
missing digit simply by  
pressing the appropriate key.  
all digits displayed  
C
key and hold it for more than  
one second.  
25  
 
Call functions  
Ending a call  
When you want to finish your call, briefly press the  
key.  
Redialling the last number  
The phone stores numbers you have dialed,  
received, or missed, if the caller is identified. See  
“Call records” on page 87 for further details.  
To recall any of these numbers:  
1. If you have typed characters on the display,  
press the  
key to return to idle mode.  
2. Press the  
key to display a list of the last  
numbers, in the order in which the calls were  
made.  
3. Use the Up and Down keys or volume keys on  
the left side of the phone to scroll through the  
numbers until the number you want highlights.  
4. T  
o
Press the  
dial the number  
edit the number  
key.  
Options soft key and  
select Edit. Change the  
number as required,  
referring to page 25.  
delete the number  
Options soft key and  
select Delete  
.
delete all of the  
numbers on the  
Redial list  
Options soft key and  
select Delete all. Mark  
the All calls box and  
press the Delete soft  
key. When a confirming  
message displays, press  
the Yes soft key.  
26  
Call functions  
Making a call from Phonebook  
You can store the phone numbers that you use  
regularly in the SIM card or the phone’s memory,  
which are collectively called Phonebook. Simply  
select a name to recall the associated number. For  
further details about Phonebook features, see  
page 52.  
Adjusting the volume  
During a call, if you want to adjust the earpiece  
volume, use the volume keys on the left side of the  
phone.  
Press the key to increase the volume level and the  
key to decrease the level.  
In idle mode, you can also adjust the keypad tone  
volume using these keys.  
27  
Call functions  
Answering a call  
When somebody calls you, the phone rings and shows  
the incoming call image.  
When the caller can be identified, the caller’s phone  
number, or name if stored in Phonebook, displays.  
1. Press the  
key or the Accept soft key to answer  
the incoming call.  
When the Anykey answer option in the Extra  
settings menu (Menu 5.6) is checked, you can  
press any key to answer a call, except for the  
key and the Reject soft key. See page 103.  
Note: To reject an incoming call, press the  
key  
or the Reject soft key.  
2. End the call by pressing the  
key.  
Note: You can answer a call while using Phonebook or  
menu features. After ending the call, the display  
returns to the function screen you were using.  
Viewing missed calls  
When you are unable to answer a call for any reason,  
you can find out who was calling you, if this service is  
available, so that you can call the person back.  
The number of missed calls displays on the idle screen  
immediately after a call has been missed.  
To view the missed call immediately:  
1. Press the View soft key.  
The number for the most recent missed call  
displays, if available.  
28  
Call functions  
2. To  
scroll through the  
Press the  
Up or Down key.  
missed calls  
call the number  
displayed  
key.  
edit or delete a missed Select soft key. See  
call number below.  
Editing a missed call number  
Note: When the number for the missed call is not  
available, the Edit option does not display.  
1. Press the Options soft key.  
2. Press the Up or Down key to highlight the Edit  
option.  
3. Press the Select soft key.  
4. Change the number, as required.  
5. To  
call the number  
store the number  
Press the  
key.  
Save soft key and enter  
the name and location  
required. For further  
details, see page 52.  
Deleting a missed call  
1. Press the Options soft key.  
2. If necessary, press the Up or Down key to  
highlight the Delete option.  
3. Press the Select soft key.  
29  
Call functions  
You can press the  
key at any time to exit the  
Missed Call feature.  
Note: You can access the Missed Call feature at any  
time by selecting the Missed calls menu  
(Menu 3.1). For further details, see page 87.  
Quickly switching to silent mode  
Silent mode is useful when you wish to stop the  
phone from making noise, in a theatre for example.  
In idle mode, press and hold the  
key until the  
“Silent mode” message and the silent icon (  
display.  
)
In silent mode, your phone changes the sound  
settings as follows:  
Option  
New setting  
Alert type (Menu 4.3  
)
Vibration  
Off  
Keypad tone (Menu 4.4  
Message tone (Menu 4.5  
Power off tone (Menu 4.7  
Extra tones (Menu 4.8  
)
)
Off  
)
Off  
)
Off  
To exit and reactivate the previous sound settings,  
press and hold the key again until the “Exit silent  
mode” message displays. The silent icon ( ) no  
longer displays.  
30  
 
Options during a call  
Your phone provides a number of control functions  
that you can use during a call.  
Putting a call on hold  
You can place a call on hold whenever you want.  
You can make another call while you have a call in  
progress if your network supports this service.  
When you have an active call and a call on hold, you  
may switch between the two calls, changing the one  
on hold to active and placing the other on hold.  
To place a call on hold, simply press the Hold soft  
key. You can reactivate the call whenever you want,  
by pressing the Unhold soft key.  
To make a call while you have a call in progress:  
1. Enter the phone number that you wish to dial or  
look it up in Phonebook.  
For details about searching for a number in  
Phonebook, see page 34.  
2. Press the  
key to dial the second call.  
The first call is automatically put on hold.  
Or,  
1. Put the current call on hold by pressing the Hold  
soft key.  
2. Make the second call in the normal way.  
To switch between the two calls, simply press the  
Swap soft key.  
31  
Options during a call  
The current call is placed on hold and the call on  
hold is reactivated so that you can continue  
conversing with the other person.  
When you want to finish, end each call normally by  
pressing the  
key.  
Using the menu functions  
During a call, you can access the main menu  
functions.  
1. Press the Options soft key.  
2. Press the OK soft key when the Menu option  
highlights.  
3. Press the Up or Down key to scroll through the  
menu list.  
Note: You cannot use some menus during a call.  
They are deactivated on this list.  
4. When the menu you want highlights, press the  
Select soft key.  
5. If the selected menu has sub-options, repeat  
Steps 4 and 5.  
For further details about the menu functions  
available, see the list on page 47.  
Switching the microphone off (Mute)  
You can temporarily switch your phone’s  
microphone off so that the person with whom you  
are speaking cannot hear you.  
32  
Options during a call  
Example: You wish to say something to another  
person in the room, but do not want the  
person on the phone to hear you.  
To switch the microphone off temporarily:  
1. Press the Options soft key.  
2. Press the Down key to highlight the Mute  
option.  
3. Press the OK soft key.  
The other person can no longer hear you.  
To switch the microphone back on:  
1. Press the Options soft key.  
2. If necessary, press the Down key to highlight the  
Unmute option.  
3. Press the OK soft key.  
The other person can hear you again.  
Muting/Sending key tones  
These options allow you to turn the key tones off or  
on. If the Mute keys option is selected, your phone  
does not transmit key tones, which allows you to  
press keys without hearing annoying key tones  
during a call.  
Note: To communicate with answering machines or  
computerised telephone systems, the Send  
keys option must be selected.  
33  
Options during a call  
Sending DTMF tones  
You can send the DTMF (Dual Tone Multi-Frequency)  
tones of the number on the display during a call.  
This option is helpful for entering a password or  
account number when you call an automated  
system, like a banking service.  
To send the DTMF tones:  
1. When you are connected to the teleservice  
system, press the Options soft key.  
2. Press the Down key to highlight the Send DTMF  
option.  
3. Press the OK soft key.  
4. Enter the number you want to send and press  
the OK soft key.  
The tones of the displayed number are sent.  
Searching for a number in  
Phonebook  
You can search for a number in Phonebook during a  
call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the Phonebook  
option.  
34  
 
Options during a call  
3. Press the OK soft key.  
The Phonebook entries are listed.  
4. Enter the name that you wish to find.  
If you enter the first few letters of the name, the  
Phonebook entries will be listed, starting with  
the first entry matching your input.  
5. To view the highlighted entry, press the View  
soft key.  
For further details about the Phonebook feature,  
see page 52.  
Answering a second call  
You can answer an incoming call while you have a  
call in progress, if your network supports this  
service and you have set the Call waiting menu  
(Menu 7.3) to Activate; see page 120. You are  
notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call.  
The first call is automatically put on hold.  
2. To switch between the two calls, press the Swap  
soft key.  
3. To end the call on hold, press the Options soft  
key and select the End held call option.  
To end the current call, press the  
key.  
35  
Options during a call  
Making a multi-party call  
Multi-party calling is a feature of some networks  
that allows up to six people to take part  
simultaneously in a multi-party or conference call.  
For more information, contact your service provider.  
Setting up a multi-party call  
1. Call the first participant in the normal way.  
2. Call the second participant in the normal way.  
The first call is automatically put on hold.  
3. To connect the first participant to you and the  
second participant in a multi-party call, press  
the Options soft key and select the Join option.  
Press the OK soft key.  
4. To add a new person to the multi-party call, call  
the person in the normal way and press the  
Options soft key. Select the Join option and  
press the OK soft key.  
You can add incoming callers by answering the call,  
pressing the Options soft key, and selecting the  
Join option. Repeat as required.  
Having a private conversation with one  
participant  
1. Press the Options soft key and choose the  
Select one option. Press the OK soft key.  
The list of call participants appears.  
2. Highlight a person from the list by pressing the  
Up or Down key, and press the Select soft key  
or the  
key.  
36  
Options during a call  
3. When the Private option highlights, press the  
OK soft key.  
Now you can talk privately with that person. The  
other participants can still converse with each  
other.  
4. To return to the multi-party call, press the  
Options soft key and select the Join option.  
Press the OK soft key.  
All the multi-party call participants can now hear  
each other.  
Dropping one participant  
1. Press the Options soft key and choose the  
Select one option. Press the OK soft key.  
The list of call participants appears.  
2. Highlight a person from the list by pressing the  
Up or Down key, and press the Select soft key  
or the  
key.  
3. Press the Down key to select the Remove  
option and press the OK soft key.  
The call with that participant ends, but you can  
continue to talk with the others.  
4. End the multi-party call by pressing the  
key.  
37  
Entering text  
When using your phone, you will often need to  
enter text, such as when storing a name in  
Phonebook, creating a personal greeting, or  
scheduling events on your calendar. You can enter  
alphanumeric characters by using your phone’s  
keypad.  
Your phone has the following text input modes:  
• T9 mode  
This mode allows you to enter words with only  
one keystroke per letter. Each key on the keypad  
has more than one letter––for example, when  
you press the  
5
key, J, K, or L can be displayed.  
The T9 mode automatically compares your  
keystrokes with an internal linguistic dictionary to  
determine the correct word, thus requiring far  
fewer keystrokes than the traditional alphabet  
mode.  
• Alphabet mode  
This mode allows you to enter letters by pressing  
the key labelled with the letter you want to enter  
once, twice, three, or four times until it displays.  
• Number mode  
This mode allows you to enter numbers.  
• Symbol mode  
This mode allows you to enter various symbols  
and special characters.  
38  
   
Entering text  
Changing the text input mode  
When you are in a field that allows characters to be  
entered, you will notice the text input mode  
indicator on the display.  
Example: Writing a text message  
Write new  
Text input  
Options  
mode indicator  
To select the  
Press the right soft key  
until  
T9 mode  
displays.  
See page 40.  
Alphabet mode  
Number mode  
Symbol mode  
displays.  
See page 42.  
displays.  
See page 43.  
the symbol list displays.  
See page 44.  
39  
Entering text  
Using T9 mode  
The T9 predictive text input mode allows you to key  
in any character using single keystrokes. This text  
input mode is based on a built-in dictionary.  
To enter a word in T9 mode:  
1. When you are in T9 mode, start entering a word  
by pressing keys  
2
to  
9. Press each key only  
once for one letter.  
Example: To enter “Hello” in the T9 mode, press  
the and keys.  
4,  
3,  
5,  
5
6
The word that you are typing appears on the  
display. It may change with each key that you  
press.  
2. Enter the whole word before editing or deleting  
any keystrokes.  
3. If the word is correct, start entering the next  
word.  
Otherwise, press the  
0, Up, or Down key  
repeatedly to display alternative word choices  
for the keys that you have pressed.  
Example: Both “Of” and “Me” use the  
6
and  
3
keys. The phone displays the most  
commonly used choice first.  
4. Put a space between words by pressing the  
key.  
To add a new word into the T9 dictionary:  
1. After pressing the keys corresponding to the  
word you want to add, press the  
to display the alternative words.  
0
or Down key  
40  
 
Entering text  
2. When you press the  
0
or Down key at the last  
alternative word, Add displays. Press the Add  
soft key.  
3. If necessary, clear the word using the  
C
key and  
enter the word you want to add using alphabet  
mode; see page 42.  
4. Press the OK soft key.  
The word is added to the T9 dictionary and  
becomes the first word for the associated  
keypress.  
Note: This feature may not be available for some  
languages.  
To enter periods, hyphens, or apostrophes, press  
the  
1
key. The T9 mode applies grammar rules to  
ensure that the correct punctuation is used.  
Example: The key is used twice to display two  
1
punctuation marks:  
L
e
t
s
e
a
t
.
To shift the case in T9 mode, use the  
key.  
There are three cases; Lower case ( ), Initial  
Capital ( Ab ) and Capital lock ( ).  
• You can move the cursor by using the Left and  
Right keys. To delete letters, press the  
C
key.  
Press and hold the key to clear the display.  
C
41  
Entering text  
Using alphabet mode  
Use the  
1
to  
0
keys to enter your text.  
1. Press the keys labelled with the required letter:  
- Once for the first letter  
- Twice for the second letter  
- And so on  
2. Select the other letters in the same way.  
Note: The cursor moves to the right when you press a  
key. When entering the same letter twice or a  
different letter on the same key, just wait for a  
moment for the cursor to move to the right  
automatically, and then select the next letter.  
Refer to the table below for further details about the  
characters available:  
Characters in the order displaye  
Key  
Lower case  
Upper case  
Space  
42  
 
Entering text  
To insert a space, press the  
key.  
To shift the case in alphabet mode, use the  
key. There are three cases; Lower case ( ),  
Initial Capital ( Ab ) and Capital lock ( ).  
• You can move the cursor by using the Navigation  
key. To delete letters, press the  
C
key. Press and  
hold the key to clear the display.  
C
Using number mode  
Number mode enables you to enter numbers into a  
text message. Press the keys corresponding to the  
digits you want to enter.  
43  
 
Entering text  
Using symbol mode  
Symbol mode enables you to insert symbols into a  
text message.  
Symbol  
OK  
10  
To  
Press the  
select a symbol  
corresponding number  
key.  
display more symbols  
Up or Down key.  
insert the symbol(s)  
into your message  
OK soft key.  
cancel your input and  
return to the previous  
mode  
soft key.  
44  
 
Using the menus  
The phone offers a range of functions that allows you  
to tailor it to your needs. These functions are arranged  
in menus and sub-menus.  
The menus and sub-menus can be accessed by  
scrolling with the navigation keys or by using  
shortcuts.  
Accessing a menu function by scrolling  
1. In idle mode, press the Menu soft key to access  
menu mode.  
2. Scroll with the Up or Down key to reach a main  
menu, Phone settings for example. Press the  
Select soft key or the Right key to enter the menu.  
3. If the menu contains any sub-menus, Language  
for example, you can access them by scrolling with  
the Up or Down key and pressing the Select soft  
key or the Right key.  
If the menu that you have selected contains further  
options, repeat this step.  
4. To  
scroll through the  
Press the  
Up or Down key, or use  
menus  
the  
and  
keys on  
the left side of the  
phone.  
confirm the chosen  
setting  
Select soft key or the  
Right key.  
return to the previous  
menu level  
soft key or the Left  
key.  
exit the menu without  
changing the settings  
key.  
45  
Using the menus  
Accessing a menu function by using  
its shortcut  
The menu items, e.g., menus, sub-menus, and  
options, are numbered and can be accessed quickly  
by using their shortcut numbers. The shortcut  
number is shown on the bottom right next to the  
soft key on the display. Simply press the Menu soft  
key and enter the number of the menu you want.  
Note: The numbers assigned to each menu are  
indicated on the list starting on page 47. They  
may not match the menu numbers on the  
phone, depending on the services supported by  
your SIM card.  
Example: Accessing the Language option.  
1. Press the Menu soft key.  
2. Press the  
3. Press the  
5
4
key for Phone settings  
key for Language  
.
.
The languages available display.  
46  
Using the menus  
List of menu functions  
The following list shows the menu structure  
available and indicates the number assigned to  
each option and the page where you can find a  
description of each feature.  
1. Text messages (see page 64)  
1.1 Inbox  
1.2 Outbox  
1.3 Write new  
1.4 Templates  
1.5 Settings  
1.5.1 Setting 1*  
*
1.5.2 Setting 2  
1.5.3 Common setting  
1.6 Delete all  
1.7 Memory status  
1.7.1 SIM memory  
1.7.2 Phone memory  
1.7.3 CB memory  
1.8 Voice mail  
1.8.1 Connect to voice server  
1.8.2 Voice server number  
1.9 Broadcast  
1.9.1 Read  
1.9.2 Receive  
1.9.3 Channel list  
1.9.4 Language  
* Shown only if it is supported by your SIM card.  
47  
   
Using the menus  
2. Multimedia messages (see page 75)  
2.1 Inbox  
2.2 Outbox  
2.3 Draft  
2.4 Write new  
2.5 Templates  
2.6 Delete all  
2.7 Memory status  
2.8 Setup  
2.8.1 Delivery report  
2.8.2 Read reply  
2.8.3 Auto download  
2.8.4 Message acceptance  
2.8.5 Hide ID  
2.8.6 Expiry date  
2.8.7 Delivery time  
2.8.8 Priority  
2.8.9 Report allowed  
2.8.10 Page duration  
2.9 MMS profile  
3. Call records (see page 87)  
3.1 Missed calls  
3.2 Received calls  
3.3 Dialled calls  
3.4 Delete all  
3.5 Call time  
3.5.1 Last call time  
3.5.2 Total sent  
3.5.3 Total received  
3.5.4 Reset timers  
3.6 Call cost*  
3.6.1 Last call cost  
3.6.2 Total cost  
3.6.3 Max cost  
3.6.4 Reset counters  
3.6.5 Set max cost  
3.6.6 Price/Unit  
* Shown only if it is supported by your SIM card.  
48  
Using the menus  
4. Sound settings (see page 91)  
4.1 Ring tone  
4.2 Ring volume  
4.3 Alert type  
4.4 Keypad tone  
4.5 Message tone  
4.5.1 SMS tone  
4.5.2 SMS-CB tone  
4.5.3 MMS tone  
4.6 Alert on call  
4.7 Power on/off  
4.8 Extra tones  
5. Phone settings (see page 96)  
5.1 Display settings  
5.1.1 Wallpaper  
5.1.2 Menu style  
5.1.3 Auto key lock  
5.1.4 Contrast  
5.1.5 Backlight  
5.1.6 Graphic logo  
5.2 Greeting message  
5.3 Own number  
5.4 Language  
5.5 Security  
5.5.1 PIN check  
5.5.2 Change PIN  
5.5.3 Phone lock  
5.5.4 Change password  
5.5.5 Privacy  
5.5.6 SIM lock  
5.5.7 FDN mode*  
5.5.8 Change PIN2  
*
5.6 Extra settings  
5.7 Short cut  
5.7.1 Key up  
5.7.2 Key down  
5.7.3 Key right  
5.7.4 Key left  
5.8 Reset settings  
* Shown only if it is supported by your SIM card.  
49  
 
Using the menus  
6. Organiser (see page 105)  
6.1 Alarm  
6.1.1 One time alarm  
6.1.2 Daily alarm  
6.1.3 Morning call  
6.1.4 Remove alarm  
6.1.5 Autopower  
6.2 Calendar  
6.3 Time & Date  
6.3.1 Set time  
6.3.2 Set date  
6.3.3 World time  
6.3.4 Time format  
6.4 Calculator  
6.5 To do list  
6.6 Voice memo  
6.6.1 Voice record  
6.6.2 Memo list  
6.6.3 Delete all  
6.6.4 Memory status  
6.7 Currency exchange  
7. Network services (see page 116)  
7.1 Call diverting  
7.1.1 Divert always  
7.1.2 Busy  
7.1.3 No reply  
7.1.4 Unreachable  
7.1.5 Cancel all  
7.2 Call barring  
7.2.1 All outgoing  
7.2.2 International  
7.2.3 International except to home  
7.2.4 All incoming  
7.2.5 Incoming while abroad  
7.2.6 Cancel all  
7.2.7 Change barring password  
7.3 Call waiting  
7.4 Network selection  
7.5 Caller ID  
50  
Using the menus  
7.6 Closed user group  
7.6.1 Index list  
7.6.2 Outside access  
7.6.3 Default group  
7.6.4 Deactivate*  
8. Funbox (see page 125)  
8.1 WAP browser  
8.1.1 Home  
8.1.2 Favorite  
8.1.3 http://  
8.1.4 Settings  
8.1.5 Clear cache  
8.1.6 Push message  
8.2 Games  
8.3 Sounds  
8.4 Images  
8.5 Delete all  
8.6 Memory status  
8.6.1 Games  
8.6.2 Sounds & Images  
**  
9. SIM AT  
(see page 136)  
* Shown only if the Closed user group Feature is active.  
** Shown only if it is supported by your SIM card.  
51  
Phonebook  
You can store phone numbers and their  
corresponding names in the memory of your SIM  
card and phone’s memories. They are physically  
separate but are used as a single entity, called  
Phonebook.  
Storing a number with a name  
There are two ways to store a number:  
• Using the Save soft key in idle mode  
• Using the New entry option in the Phonebook  
menu  
Storing a number in idle mode  
As soon as you start to enter a number, Save  
appears above the left soft key to allow you to store  
the number in Phonebook.  
1. Enter the number you want to store.  
Note: If you make a mistake while entering a  
number, correct it using the  
further details, see page 25.  
C
key. For  
2. When you are sure that it is correct, press the  
Save soft key.  
3. Select an icon to identify the category of the  
number to be stored. Three categories are  
available:  
: Mobile phone number  
: Office number  
: Home number  
To select the category, press the Left or Right  
key and press the Select soft key.  
52  
   
Phonebook  
4. Select a memory location, either SIM or Phone  
by pressing the Up or Down key and press the  
Select soft key.  
,
Note: When you change phones, any numbers  
stored in your SIM card memory are  
automatically available with the new phone,  
whereas any numbers stored in the phone’s  
memory must be reentered.  
5. Enter a name and press the OK soft key.  
The maximum length of a name depends on  
your SIM card. For further details about how to  
enter characters, see page 38.  
6. If you do not want to save the number and  
name in the suggested location, press the  
C
key  
to clear the location number and enter another  
location by pressing the number keys.  
7. Press the OK soft key to store the name and  
number.  
After storing, the phone displays the Phonebook  
entry or name you just created.  
8. To  
use the entry options  
Press the  
Options soft key. For  
further details, see  
page 55.  
return to the idle  
screen  
key.  
53  
 
Phonebook  
Storing a number using the Phonebook  
menu  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to New entry by pressing the Up or Down  
key and press the Select soft key.  
3. Select an icon to identify the category of the  
number to be stored by pressing the Left or  
Right key, and press the Select soft key.  
Note: The e-mail icon (  
) is available in this  
step. It allows you to save an e-mail  
address instead of a phone number.  
4. Select a memory location, either SIM or Phone  
by pressing the Up or Down key and press the  
Select soft key  
,
5. Enter a name and press the OK soft key.  
The maximum length of a name depends on  
your SIM card. For further details about how to  
enter characters, see page 38.  
6. Enter the number or address you want to store  
and press the Save soft key.  
7. Continue the procedure from Step 6 on page 53  
to store the number.  
54  
Phonebook  
Using Phonebook entry options  
While accessing any Phonebook entry, press the  
Options soft key to access the options for the  
entry.  
To  
Press the  
select the  
Select soft key.  
highlighted option  
highlight a  
different option  
Up or Down key until the  
option you want highlights.  
The following options are available:  
Paste: allows you to paste the number into the  
normal dialling mode. Use this option to dial a  
number similar to one in the Phonebook, such as a  
different extension in the same office.  
Use the  
see page 25 for further details. When you are ready  
to dial, press the key.  
C
key to change the number as required;  
Edit allows you to edit the name and number.  
:
Select One entry to change one number for the  
selected name. If you change the name, the  
number is saved separately. Select All entries to  
change the name of the entry.  
Delete: allows you to delete the name and number  
from Phonebook. You are asked to confirm that you  
wish to delete the name and number by pressing  
the Yes soft key.  
55  
 
Phonebook  
Copy: allows you to copy the number to another  
location. Use this option to store a number similar  
to one already in the memory; once copied, edit the  
number and store it in Phonebook.  
Caller group: allows you to organise Phonebook  
entries in caller groups so that the phone alerts you  
in a specific way when a person from one of the  
groups calls you. Select one of the ten groups  
available.  
To remove an entry from a group, select the No  
group option.  
For further details about how to change caller group  
properties, see page 59.  
Add entry: allows you to add a new number to the  
currently selected name.  
56  
Phonebook  
Searching for a number in  
Phonebook  
After storing numbers in Phonebook, you can  
search for them in two ways: by name or by caller  
group.  
Searching for a number by name  
1. When the idle screen displays, press the Name  
soft key.  
2. Press the Select soft key when Search  
highlights. You are asked to enter a name.  
3. Enter the first few letters of the name that you  
want to find.  
The Phonebook entries are listed, starting with  
the first entry matching your input.  
4. To  
view the highlighted  
Press the  
View soft key.  
entry  
Up or Down key until  
the entry highlights.  
select a different  
entry  
key labelled with the  
letter you want to  
enter.  
look for a name  
starting with a  
different letter  
5. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key to access the Phonebook entry options;  
for further details, see page 55.  
57  
Phonebook  
Searching for a number by caller group  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to Group search by pressing the Up or  
Down key and press the Select soft key. You are  
asked to enter a group name.  
3. Enter the first few letters of the group name that  
you want to find.  
The caller groups are listed, starting with the  
first group matching your input.  
4. If necessary, scroll to a group by pressing the Up  
or Down key and press the View soft key.  
The Phonebook entries in the caller group are  
listed.  
5. To  
Press the  
view the highlighted View soft key.  
entry  
select a different  
entry  
Up or Down key until  
the entry you want  
highlights.  
6. Once you have found the entry, press the  
key to dial the number, or press the Options  
soft key to access the Phonebook entry options;  
for further details, see page 55.  
58  
Phonebook  
Editing a caller group  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to Edit group by pressing the Up or Down  
key and press the Select soft key.  
3. Scroll through the list of groups by pressing the  
Up or Down key.  
4. When the group you want highlights, press the  
Options soft key.  
5. Select each option and change the settings, as  
required. The following options are available:  
Call ring tone: allows you to set a ring tone  
to be used when you receive a voice call from  
a person in the group.  
SMS tone: allows you to set a message tone  
to be used when you receive a message from a  
person in the group.  
Graphic: allows you to set a graphic icon to be  
displayed when you receive a voice call from a  
person in the group.  
Group name: allows you to assign a name to  
the group. For further details about how to  
enter characters, see page 38.  
6. When you have finished changing the settings,  
press the or key.  
C
59  
 
Phonebook  
Speed-dialling  
Once you have stored phone numbers in  
Phonebook, you can set up to eight speed-dial  
entries and then dial them easily whenever you  
want, simply by pressing the associated number  
key.  
Setting up speed-dial entries  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to Speed dial by pressing the Up or Down  
key and press the Select soft key.  
3. Select the key to which you wish to assign the  
speed-dialling number, from the  
2
to  
9
keys,  
and press the OK soft key.  
Note: If you have already assigned a number to  
the key, the Options soft key replaces the  
OK soft key. Go to Step 6.  
4. Select a Phonebook entry from the list and press  
the View soft key.  
5. Select a number, if the entry has more than one,  
by pressing the Up or Down key and press the  
Select soft key.  
6. Once you have assigned a phone number to the  
key, you can use the following options by  
pressing the Options soft key:  
Change: allows you to assign a different  
phone number to the key.  
Delete: allows you to clear the setting so that  
no number is assigned to the key.  
60  
Phonebook  
Delete all: allows you to clear the settings for  
all keys so that no numbers are assigned to  
any of the keys.  
Number: allows you to view the number  
assigned to the key.  
7. When you have finished setting the options,  
press the or key.  
C
Speed-dialling from Phonebook  
To speed-dial the numbers assigned to keys  
press and hold the appropriate key.  
2
to  
9,  
Note: Memory location 1 is reserved for your Voice  
mail server number.  
Deleting all Phonebook entries  
You can delete all of the entries in a selected  
memory or both memories.  
1. When the idle screen displays, press the Name  
soft key.  
2. Scroll to Delete all by pressing the Up or Down  
key and press the Select soft key.  
3. To place a check mark by the memory you want  
to empty, All SIM, or Phone, press the Mark  
,
soft key.  
You can remove the check mark by pressing the  
Unmark soft key.  
4. When you have finished marking, press the  
Delete soft key to delete the entries in the  
selected memory.  
61  
Phonebook  
5. Enter the phone password and press the OK soft  
key.  
Note: The password is preset to “00000000” at  
the factory. To change it, see page 101.  
6. When the confirming message appears, press  
the Yes soft key.  
To cancel the deletion, press the No soft key.  
7. When you finish deleting, press the  
key.  
C
or  
Checking memory status  
You can check how many names and numbers are  
stored in Phonebook, in both the SIM card and  
phone memories. You can also see the capacity of  
both memories.  
1. When the idle screen displays, press the Name  
soft key.  
2. Select the Memory status option by pressing  
the Up or Down key and press the Select soft  
key.  
3. Press the Up or Down key to view the number of  
existing entries, and the number of spaces still  
available in the SIM card and phone memories.  
4. When you have finished checking, press the  
key.  
C
or  
62  
Phonebook  
Using service dialling numbers  
You can view a list of Service dialling numbers  
(SDN) assigned by your network provider. Such  
numbers include the emergency, directory  
enquiries, and voice mail numbers.  
1. In idle mode, press the Name soft key.  
2. Select the SDN option by pressing the Up or  
Down key and press the Select soft key.  
3. Scroll through the numbers by using the Up or  
Down key.  
4. To dial the number displayed, press the Dial soft  
key.  
Note: This option is available only when your SIM  
card supports Service dialling numbers  
(SDN).  
63  
Text messages  
Short Message Service (SMS) allows you to send  
and receive short text messages to and from other  
GSM mobile phones. In addition, your phone  
supports the Enhanced Messaging Service (EMS),  
which enables you to make messages that include  
simple pictures, melodies, and animation. To use  
this feature, you must subscribe to the message  
service of your service provider.  
When the Message icon ( ) appears, you have  
received new text messages. If the memory is full,  
an error message displays and you cannot receive  
any new messages. Use the Delete option in each  
message box to delete old messages to allow the  
new ones to come in.  
Inbox (Menu 1.1)  
This message box is used to store the messages  
that you have received.  
When you enter this menu, the list of messages in  
the box displays with the senders’ phone numbers  
or names, if available in Phonebook.  
1. Select a message from the list and press the  
View soft key to read the message contents.  
2. To scroll through the contents, press the Up or  
Down key.  
3. To scroll to the previous or next message, press  
the  
or  
key.  
While reading a message, you can choose the  
following options by pressing the Options soft key:  
Delete: allows you to delete the message.  
64  
 
Text messages  
Send: allows you to resend the message. For  
further details about how to send a message, see  
page 67.  
Text reply: allows you to reply to the sender by  
sending a text message.  
Call back: allows you to call the sender back.  
Cut address: allows you to extract the sender’s  
number and URL /e-mail addresses or phone  
numbers from the message text, so that you can  
save them in your phone’s memory or SIM card.  
Move to phone: allows you to move the message  
from the SIM card to the phone memory. This  
option is only available when you select a message  
stored in the SIM card.  
Move to SIM: allows you to move the message  
from the phone memory to the SIM card. This  
option is only available when you select a message  
stored in the phone memory.  
Select objects: allows you to save media objects,  
such as sounds or images, from the message into  
your phone. You can use the objects when writing  
future messages. For details, see page 68.  
Outbox (Menu 1.2)  
This message box is used to store the messages  
that you have already sent or will send.  
When you enter this menu, the list of messages  
displays with the recipients’ phone numbers or  
names, if available in Phonebook.  
1. Select a message from the list and press the  
View soft key to read the message contents.  
65  
Text messages  
2. To scroll through the contents, press the Up or  
Down key.  
3. To scroll to the previous or next message, press  
the  
or  
key.  
While reading a message, you can choose the  
following options by pressing the Options soft key:  
Delete: allows you to delete the message.  
Send: allows you to resend the message. For  
further details about how to send a message, see  
page 67.  
Cut address: allows you to extract the destination  
number and URL /e-mail addresses or phone  
numbers from the message text, so that you can  
save them in your phone’s memory or SIM card.  
Move to phone: allows you to move the message  
from the SIM card to the phone memory. This  
option is only available when you select a message  
stored in the SIM card.  
Move to SIM: allows you to move the message  
from the phone memory to the SIM card. This  
option is only available when you select a message  
stored in the phone memory.  
Select objects: allows you to save media objects,  
such as sounds, melody, picture, or animation from  
the message into your phone. You can use the  
objects when writing a message. For details, see  
page 68.  
Write new (Menu 1.3)  
In this menu, you can write and send a text  
message.  
66  
 
Text messages  
Note: When you add media objects to the message,  
the number of characters you can enter  
decreases.  
Creating a simple text message  
1. Create your message.  
Note: For further details about entering  
characters, see page 38.  
2. When you finish entering the message, press  
the Options soft key. The following options are  
available:  
Send only: allows you to send the message.  
The message is deleted after sending.  
Save and send: allows you to save a copy of  
the message and then send the message. You  
can read the message in your Outbox.  
Save only: allows you to save the message so  
that it can be sent later. You can read the  
message in your Outbox.  
• For further details about Text formatting  
Add objects Add templates Add  
phonebook Add bookmark, and Language  
,
,
,
,
options, see page 68.  
3. Select Send only or Save and send, and press  
the Select soft key.  
If you want to just save the message, select  
Save only. After saving the message, the phone  
returns to the Text messages menu.  
4. If you select a save option, choose the memory  
where the message is to be saved and press the  
OK soft key.  
67  
   
Text messages  
5. Enter a destination number and press the OK  
soft key.  
The message is sent.  
Note: If transmission fails, the phone will ask you if  
you want to retry. Press the OK soft key to  
confirm. Otherwise, press the Exit soft key to  
return to the SMS New screen.  
Creating a message using the options  
1. Create a message.  
2. Press the Options soft key.  
3. Select one of the following options by using the  
Up and Down keys and pressing the Select soft  
key:  
Text formatting: allows you to format the  
style of the text. For the Size attribute,  
Normal  
,
Large, and Small sizes are  
available. For the Underline and  
Strikethrough attributes, select On or Off  
.
These attributes can be combined.  
Add objects: allows you to add a sound,  
melody, picture, or animation to the message.  
Select the category of the object to be added.  
In each category, you can select the various  
factory-set items, or choose an item received  
from other sources, such as items downloaded  
from the Internet, or received in multimedia  
messages.  
Add templates: allows you to apply one of  
the preset message templates to the text.  
Select one of five messages stored in the  
Templates menu (Menu 1.4). For further  
details, see page 69.  
68  
   
Text messages  
Add phonebook: allows you to add a  
Phonebook entry to your message. Select one  
from the list.  
Add bookmark: allows you to add a web  
page’s address stored in your Favorite list  
(Menu 8.1.2). Select one from the list.  
Language: allows you to change the language  
to be used in the T9 input mode. Select the  
language to be used.  
4. Complete the message, and send or save it by  
following the procedure from Step 2 on page 67.  
Templates (Menu 1.4)  
Using this menu, you can preset up to five  
messages that you use frequently.  
Select an empty location or the message template  
you want and press the Options soft key.  
The following options are available:  
Edit: allows you to write a new message or edit the  
message.  
Note: For further details about how to enter  
characters, see page 38.  
Send message: allows you to send the message.  
Once you have completed the message, you can  
send, save and send, or simply save it. For further  
details about how to send a message, see page 66.  
Delete: allows you to delete the message. You are  
asked to confirm the deletion by pressing the Yes  
soft key.  
69  
 
Text messages  
Settings (Menu 1.5)  
In this menu, you can set up default SMS  
information. A setting group is a collection of  
settings required to send messages. The number of  
setting groups available depends on the capacity of  
your SIM card.  
Note: The last setting you accessed is automatically  
activated for sending messages.  
Setting x (where  
x
is the setting group number):  
each group has its own sub-menu.  
Service centre: allows you to store or change the  
number of your message centre, which is required  
when sending messages. You must obtain this  
number from your service provider.  
Default destination: allows you to store the default  
destination number. The number automatically  
displays on the Destination screen when you create  
a message.  
Default type: allows you to set the default message  
type to Text Fax, Email, or Paging. The network  
,
can convert the messages into the selected format.  
Default validity: allows you to set the length of time  
your text messages are stored at the message  
centre while attempts are made to deliver them.  
Setting name: allows you to give a name to the  
setting group currently being defined.  
Common setting: The following options are  
available:  
Reply path: allows the recipient of your message to  
send you a reply via your message centre, if your  
network supports this service. To enable or disable  
this option, choose On or Off  
.
70  
Text messages  
Delivery reports: allows you to activate or  
deactivate the report function. When this function is  
activated, the network informs you whether or not  
your message has been delivered. To enable or  
disable this option, choose On or Off  
.
Bearer selection: allows you to choose either GSM  
or GPRS preferred, depending on your network.  
Character support: allows you to choose a character  
type from among GSM-alphabet Uni-code, or  
,
Automatic. If you select Uni-code and your  
recipient’s phone does not support it, your recipient  
may not be able to read your message.  
Delete all (Menu 1.6)  
This menu allows you to delete all of the text  
messages in each message box. You can also delete  
all of your messages at one time.  
To  
Press the  
select a message  
box to clear  
Up or Down key. To delete  
all of your messages,  
select All messages  
.
place a check mark  
Mark soft key.  
remove a check  
mark  
Unmark soft key.  
delete the marked  
messages  
Delete soft key.  
When a confirming message displays, press the Yes  
soft key to confirm.  
71  
Text messages  
Memory status (Menu 1.7)  
This menu shows how many messages are currently  
stored in the SIM, phone, and CB (Cell broadcast)  
memories.  
Voice mail (Menu 1.8)  
This menu provides you with a way of accessing  
your voice mailbox, if your network supports this  
service.  
The following options are available:  
Connect to voice server: before using this  
feature, you must enter the voice server number  
obtained from your service provider (see Menu  
1.8.2). You can then select a server number from  
the list and press the OK soft key to listen to your  
messages.  
You can quickly connect to the voice server by  
pressing and holding the  
1
key in idle mode.  
Voice server number: allows you to change the  
voice mail server number, if necessary.  
To  
Press the  
corresponding numeric  
keys.  
enter the server  
number  
correct a digit  
C
key.  
move the cursor to the  
left or right without  
clearing a digit  
Left or Right key.  
Note: Voice Mail is a network feature. Please contact  
your service provider for further details.  
72  
Text messages  
Broadcast (Menu 1.9)  
This network service allows you to receive text  
messages on various topics, such as the weather or  
traffic. Cell Broadcast (CB) messages display as  
soon as they are received, provided that:  
• the phone is in idle mode.  
• the Receive option is set to Enable  
.
• the message channel is currently active on the  
channel list.  
The following options are available:  
Read: lets you view the received message. The  
Volatile box displays messages from the network,  
but loses its contents as soon as the phone is  
switched off. Scroll through the message by using  
the Up and Down keys. While reading a message,  
press the Save soft key to store the message in the  
Archive box for later retrieval.  
Receive: allows you to enable or disable the  
reception of broadcast messages.  
Channel list: allows you to indicate the channels  
from which you wish to receive broadcast  
messages. The following options are available:  
Select: use to enable or disable channels on the list  
by marking or unmarking them respectively. A  
check mark displays next to each selected channel.  
Add channel: use to enter the ID and title for a new  
channel.  
Delete: use to remove a channel from the list.  
Edit: use to change the ID and title of an existing  
channel.  
73  
Text messages  
Language: allows you to select your preferred  
language to display cell broadcast messages.  
Please contact your service provider for further  
details.  
74  
Multimedia messages  
Multimedia Message Service (MMS) is a messaging  
service very similar to Short Message Service  
(SMS). It provides automatic and immediate  
delivery of personal multimedia messages from  
phone to phone or from phone to e-mail.  
In addition to the familiar text content of text  
messages, multimedia messages can contain  
images, graphics, voice, and audio clips. Images  
could include downloads of graphics and photos,  
and photos you have taken, while voice and audio  
clips could be downloaded or recorded sounds. An  
MMS message is a multimedia presentation in a  
single entry. It is not a text file with attachments.  
Using MMS, your phone can send and receive these  
multimedia messages. This function is available  
only if it is supported by your service provider. Only  
phones that offer multimedia message features can  
receive and display multimedia messages.  
Inbox (Menu 2.1)  
Viewing a message when you receive it  
When a new multimedia message comes in, the  
display shows a text notification along with the  
sender’s number.  
1. Press the View soft key to view the message.  
The display shows brief information about the  
message, such as the sender’s number, the  
message size, and the subject.  
If you want to view the message from the Inbox  
at another time, press the Exit soft key.  
75  
 
Multimedia messages  
2. To scroll through the message contents, press  
the Up or Down key.  
While viewing the message, press the Options soft  
key to use the following options:  
Retrieve: retrieves the message from the MMS  
server.  
Delete: deletes the message.  
More Information: shows you detailed  
information about the message.  
Viewing a received message from the  
Inbox  
When you access the Inbox menu (Menu 2.1), the  
list of multimedia messages you have received  
displays with the senders’ phone numbers or name,  
if they are available in Phonebook, or subjects. The  
icon to the left tells you the status of the message.  
: Messages you have already read.  
: Messages you haven’t read yet.  
1. Select a message on the list and press the  
Select soft key.  
The display presents the message and scrolls to  
the next page, if there is one, after a specified  
time; for details about setting this time interval,  
see page 85.  
2. Press the OK soft key to go to the message view  
screen.  
Or, the display automatically switches to the  
screen.  
76  
Multimedia messages  
3. To scroll through the message, press the Up or  
Down key.  
If the message has more than one page, you  
can scroll through the pages by using the Left  
and Right keys.  
While viewing a message, you can select Message  
options by pressing the Options soft key.  
If you are viewing a new message, the options are  
the same as when you view a message as soon as  
you receive it. See the previous section.  
When you are reviewing a message, the following  
options are available:  
Delete: deletes the message.  
Reply: allows you to reply to the sender by sending  
a text or multimedia message.  
Callback: allows you to call the sender back.  
Cut address: allows you to extract the sender’s  
number, so that you can dial the number or save it  
in Phonebook.  
Forward: allows you to forward the message to  
another person.  
Save picture: allows you to save an image from  
the message on your phone. Images are stored in  
the Images folder (Menu 8.4).  
Save sound: allows you to save a sound from the  
message into the Sounds folder (Menu 8.3).  
Properties: shows you information about the  
message, such as subject, sender’s address,  
message size, status, and priority.  
77  
Multimedia messages  
Outbox (Menu 2.2)  
When you access this menu, the list of the  
multimedia messages you have sent or saved  
displays. The icons on the left tell you the status of  
the messages.  
: Messages currently being sent  
: Messages sent  
: Messages your phone couldn’t send  
: Messages to be sent  
: Messages deferred  
1. Select a message on the list and press the  
Select soft key.  
The display presents the message and scrolls to  
the next page, if it has one, after a specified  
time; for details about setting this time interval,  
see page 85.  
2. Press the OK soft key to go to the message view  
screen.  
Or, the display automatically switches to the  
screen.  
3. To scroll through the message, press the Up or  
Down key.  
If the message has more than one page, you  
can scroll through the pages by using the Left  
and Right keys.  
While viewing a message, you can select the  
following options by pressing the Options soft key:  
Delete: deletes the message.  
78  
 
Multimedia messages  
Cut address: allows you to extract the destination  
numbers or addresses, so that you can dial a  
number or save them in Phonebook.  
Send: allows you to resend the message.  
Edit message: allows you to change the message  
contents, text, sound, or picture.  
Properties: shows you information about the  
message, such as subject, sender’s address,  
message size, status, and priority.  
Draft (Menu 2.3)  
After creating a multimedia message, you can store  
it in this message box and send it later.  
For further details about viewing a message, see  
“Outbox” on page 78.  
Write new (Menu 2.4)  
This menu allows you to create a new multimedia  
message and then send it to multiple destinations.  
Creating and sending a multimedia  
message  
1. Enter the subject of your message and press the  
OK soft key.  
For further details about entering characters,  
see page 38.  
79  
   
Multimedia messages  
2. When Add here highlights, press the Options  
soft key and add the message contents using  
one of the following options:  
Add text: enter the message text and press  
the OK soft key.  
Add picture: allows you to add a picture from  
the Images folder (Menu 8.4). Choose a  
picture and press the Select soft key. It may  
not be possible to add certain downloaded  
pictures, due to their file format.  
Add sound: allows you to add a sound file.  
Select Record to record a new voice memo, or  
Sound list to add one of sounds from the  
Sounds folder (Menu 8.3) or Memo list  
(Menu 6.6.2). It may not be possible to add  
certain downloaded sounds, due to their file  
format.  
Send: allows you to send the message. Use  
this option when you have finished creating  
the message. This option is activated after you  
add content to the message.  
Save: saves the message in the Draft  
(Menu  
2.3) or Templates Menu 2.5) box for later  
(
use. This option is activated after you add  
content to the message.  
Settings: allows you to change the message  
settings. For further details about each setting  
option, see page 85. After changing the  
settings, you need to press the  
soft key or  
the key to go back to the options screen.  
C
Add destination: allows you to enter  
destination numbers or addresses. See steps 7  
to 12 beginning on page 82. After adding  
them, you need to press the  
soft key or the  
C
key to go back to the options screen.  
80  
Multimedia messages  
Preview: shows your message as it will  
display on the recipient’s phone.  
Note: Only a single text entry, image file, and  
sound file can be added on each page.  
3. When the content to be added displays, press  
the Down key to highlight Add here  
.
4. Repeat steps 2 and 3 until you have finished  
creating your message.  
5. If you want to change the added items, press  
the Up or Down key to highlight one and press  
the Options soft key. The following options are  
available:  
Edit text/picture/sound: allows you to  
change text or replace the image or sound  
with another one.  
Add page: allows you to add more pages. You  
can move to each page using the Left or Right  
key when Page highlights on the message  
screen.  
Delete: deletes the item from your message.  
Duration: allows you to set how long text, an  
image, or a sound displays on the message  
presentation screen. After the specified time,  
the display scrolls to the next item and then  
continues to the next page.  
Send: allows you to send the message.  
Save: saves the message in the Draft  
(
Menu  
2.3) or Templates  
(Menu 2.5) box for later  
use.  
Settings: allows you to change the message  
settings. For further details about each setting  
options, see page 85.  
81  
Multimedia messages  
Add destination: allows you to enter  
destination addresses. See steps 7 to 12.  
Preview: shows your message as it will  
display on the recipient’s phone.  
Note: The options available are different  
depending on the item you select on the  
message screen.  
6. When you have finished creating the message,  
choose Send from the options and press the  
Select soft key.  
7. Select To Cc or Bcc to enter a destination  
,
number or address and press the Select soft  
key.  
8. Choose one of the following options and press  
the Select soft key:  
Phone number: allows you to enter the  
phone number you want.  
E-mail address: allows you to enter the e-  
mail address of the recipient if you intend to  
send the message as an e-mail.  
Phone book: allows you to retrieve a number  
from Phonebook.  
9. Enter a number or an e-mail address, or select  
a number in Phonebook.  
10. When the correct number or address displays,  
press the OK soft key.  
11. To add a destination, press the Select soft key  
when Add destination highlights. Repeat from  
step 8.  
If you want to edit the destinations, select one  
and press the Select soft key. You can change  
or delete it.  
82  
 
Multimedia messages  
12. When you have finished adding destinations,  
press the  
C
key or the  
soft key.  
13. To enter more numbers or addresses, repeat  
steps 7 through 12.  
You can enter up to 10 destinations in the To  
,
CC, and Bcc fields.  
14. When you have finished entering destinations,  
select Send message and press the Select  
soft key on the Picture Msg Send screen.  
Your phone sends the message.  
Templates (Menu 2.5)  
This menu stores messages you save as templates  
so that you can use them to make new messages.  
1. Scroll through the template list using the Up or  
Down keys.  
2. When the message template you want  
highlights, press the Select soft key.  
3. Press the OK soft key to use the following  
options, or the display automatically shows the  
options after a specified time:  
Edit message: allows you to send a message  
using the template. For further details about  
how to send a message, see page 79.  
Delete: allows you to delete the message. You  
are asked to confirm the deletion by pressing  
the Yes soft key.  
4. Press the  
key to return to idle mode.  
83  
Multimedia messages  
Delete all (Menu 2.6)  
This menu allows you to delete all of the multimedia  
messages in each message box. You can also delete  
all of your messages at one time.  
To  
Press the  
select a message  
box to clear  
Up or Down key. To delete  
all of your messages,  
select All messages  
.
place a check mark  
Mark soft key.  
remove a check  
mark  
Unmark soft key.  
delete the marked  
messages  
Delete soft key.  
When a confirming message displays, press the Yes  
soft key to confirm.  
Memory status (Menu 2.7)  
You can check the memory status for multimedia  
messages. The display shows the total space,  
including the free and used space. It also shows  
how much space is currently occupied by the  
contents of each message box.  
84  
Multimedia messages  
Setup (Menu 2.8)  
You can change the default settings for sending or  
receiving multimedia messages.  
The following options are available:  
Delivery report: when this option is enabled, the  
network informs you whether or not your message  
has been delivered.  
Read reply: when this option is enabled, your  
phone sends a request for a reply along with your  
message to the recipient.  
Auto download: you can set whether or not your  
phone retrieves new incoming messages from the  
MMS server without notifications.  
Message acceptance: you can specify the  
category of messages you want to receive.  
Hide ID: when this option is enabled, your phone  
number does not display on a recipient’s phone.  
Expiry date: you can select the length of time your  
messages are stored at the message centre after  
they are sent.  
Delivery time: you can set a delay time before the  
phone sends your messages.  
Priority: you can select the priority level of your  
message from High, Normal, and Low.  
Report allowed: when this option is disabled, the  
sender of an incoming message does not receive a  
delivery report from the network.  
Page duration: you can set how long one page of  
the received message displays on the message  
presentation screen. After the specified time, the  
display automatically scrolls to the next page.  
85  
 
Multimedia messages  
MMS profile (Menu 2.9)  
In this menu, you can configure various network  
settings that are required when you send or receive  
multimedia messages.  
Notes  
:
• The last profile you accessed is automatically  
activated for sending messages.  
• If you change the MMS settings without the service  
provider’s instructions, the MMS feature may not  
work properly.  
The following options are available for each profile:  
Profile name: enter a name that you wish to  
assign to these MMS settings.  
Connection URL: enter the address of your MMS  
server.  
Security: select a data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-secure  
.
IP address: enter the gateway address required to  
connect to the MMS server.  
User name: enter the user ID required to connect  
to the MMS server.  
Password: enter the password required to connect  
to the MMS server.  
APN: enter the access point name used for the  
address of the MMS server.  
For further details, contact your service provider.  
86  
Call records  
In this menu, you can view:  
• calls you have missed, received, or dialled.  
• the length of your calls.  
• the cost of your calls.  
Notes  
:
• You can access phone numbers that are in the three  
types of call records by pressing the  
mode.  
key in idle  
• The number of call records the phone can store may  
be different depending on your SIM card.  
Missed calls (Menu 3.1)  
This menu lets you view the numbers of the calls  
you received, but did not answer.  
The number and name, if available, display together  
with the date and time when the call was received.  
By pressing the Options soft key, you can:  
• edit the number, if available, and dial it or save it  
in Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
87  
   
Call records  
Received calls (Menu 3.2)  
This menu lets you view the numbers of the calls  
you received.  
The number and name, if available, display together  
with the date and time when the call was received.  
By pressing the Options soft key, you can:  
• edit the number, if available, and dial it or save it  
in Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
Dialled calls (Menu 3.3)  
This menu lets you view the numbers you dialled.  
The number and name, if available, display together  
with the date and time when the call was made.  
By pressing the Options soft key, you can:  
• edit the number and dial it or save it in  
Phonebook.  
• delete the call from the list.  
You can also dial the number by pressing the  
key.  
88  
Call records  
Delete all (Menu 3.4)  
This menu allows you to delete all of the records in  
each call type. You can also delete all of your call  
records at one time.  
To  
Press the  
select a call type to  
clear  
Up or Down key. To delete  
all of your call records,  
select All calls  
.
place a check mark  
Mark soft key.  
remove a check mark Unmark soft key.  
delete the marked  
messages  
Delete soft key.  
When a confirming message displays, press the Yes  
soft key to confirm.  
Call time (Menu 3.5)  
This menu lets you view the timers for calls made  
and received.  
Note: The actual time invoiced for calls by your  
service provider may vary, depending on  
network features, rounding-off for billing  
purposes, and so on.  
The following timers are available:  
Last call time: length of the last call.  
Total sent: total length of all calls made since the  
timer was last reset.  
89  
Call records  
Total received: total length of all calls received  
since the timer was last reset.  
Reset timers: option used to reset the call timers.  
You must first enter the phone password (see  
page 140) and then press the OK soft key.  
Call cost (Menu 3.6)  
This network feature lets you view the cost of calls.  
This menu may not be shown depending on your  
SIM card.  
The following options are available:  
Last call cost: cost of the last call made.  
Total cost: total cost of all calls made since the  
cost counter was last reset. If the total cost exceeds  
the maximum cost set in the Set max cost option,  
you cannot make any calls until you reset the  
counter.  
Max cost: maximum cost set in the Set max cost  
option. See below.  
Reset counters: option used to reset the cost  
counter. You must first enter your PIN2 (see  
page 142) and then press the OK soft key.  
Set max cost: option used to enter the maximum  
cost that you authorise for your calls. You must first  
enter your PIN2 (see page 142) and then press the  
OK soft key.  
Price/Unit: option used to set the cost of one unit  
(usually a small time interval, like 5 seconds or 10  
seconds); this price per unit is applied when  
calculating the cost of your calls. You must first  
enter your PIN2 (see page 142) and then press the  
OK soft key.  
90  
Sound settings  
You can use the Sound settings feature to  
customise various settings, such as the:  
• ring melody, volume, and type.  
• sounds made when you press a key, receive a  
message, or switch your phone on/off.  
• alert tone made every minute during a call, when  
you make an error, or when your phone connects  
to the system.  
Note: When the phone is in silent mode (see  
page 30), you cannot change the sound  
settings.  
Ring tone (Menu 4.1)  
This menu allows you to select a ring melody.  
You can choose between many different melodies.  
Each time you select a melody, the melody plays. If  
you have downloaded sounds from the Internet or  
EasyGPRS programme, you can use them in this  
menu.  
Ring volume (Menu 4.2)  
This menu allows you to adjust the ring volume to  
one of five levels.  
Use the Up and Down keys or the volume keys on  
the left side of the phone to increase or decrease  
the volume.  
91  
   
Sound settings  
Alert type (Menu 4.3)  
This menu allows you to specify how you are to be  
informed of incoming calls.  
The following options are available:  
Melody: the phone plays the ring melody selected  
in the Ring tone menu (Menu 4.1); see page 91.  
Vibration: the phone vibrates, but does not ring.  
Vibra+melody: the phone first vibrates three  
times and then starts ringing.  
Keypad tone (Menu 4.4)  
This menu allows you to select a tone that the  
keypad generates when you press a key.  
The following options are available:  
Off: the keys do not make any sound.  
Cool: each key, when pressed, generates a  
distinctive sound.  
Piano: each key, when pressed, generates a  
different note in the musical scale, as if played on a  
piano.  
Tone: each key, when pressed, makes a different  
sound.  
Beep: each key, when pressed, makes the same  
sound.  
92  
 
Sound settings  
Message tone (Menu 4.5)  
This menu allows you to select how the phone  
informs you that a new message has been received.  
SMS tone (Menu 4.5.1)  
This menu allows you to select how the phone  
informs you that a new text message has been  
received.  
The following options are available:  
Off: the phone neither rings nor vibrates.  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
SMS tone x: the phone uses one of several tones.  
SMS-CB tone (Menu 4.5.2)  
This menu allows you to select how the phone  
informs you that a new cell broadcast (CB) message  
has been received.  
The following options are available:  
Off: the phone neither rings nor vibrates.  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
SMS-CB tone x: the phone uses one of several CB  
tones.  
93  
Sound settings  
MMS tone (Menu 4.5.3)  
This menu allows you to select how the phone  
informs you that a new multimedia message has  
been received.  
The following options are available:  
Off: the phone neither rings nor vibrates.  
Vibration: the phone vibrates.  
Single beep: the phone beeps once.  
MMS tone x: the phone uses one of several tones.  
Alert on call (Menu 4.6)  
This menu allows you to set whether or not the  
phone informs you when you receive a new  
message or when the time an alarm is set to go off  
comes during a call.  
Off: the phone doesn’t actively alert you to  
incoming messages or alarms. It only displays the  
corresponding notification.  
On: the phone alerts you during a call.  
Power on/off (Menu 4.7)  
This menu allows you to select a melody that the  
phone sounds when it is switched on and off.  
To turn the sound off, select Off  
.
94  
Sound settings  
Extra tones (Menu 4.8)  
You can customise additional tones used for the  
phone.  
To turn a given  
tone  
Press the  
on  
On soft key.  
A check mark displays next  
to the option.  
off  
Off soft key.  
The check mark no longer  
displays.  
The following options are available:  
Error tone: sets whether or not the phone informs  
you when you make a mistake.  
Minute minder: sets whether or not the phone  
beeps every minute during an outgoing call to keep  
you informed of the length of your call.  
Connect tone: sets your phone to beep when it  
connects to a network.  
95  
Phone settings  
Many different features of your phone can be  
customised to suit your preferences. All of these  
features are accessed in the Phone settings menu.  
Display settings (Menu 5.1)  
In this menu, you can change various settings for the  
display or backlight.  
Wallpaper (Menu 5.1.1)  
Via this menu, you can change the background  
image or the colour of the text displayed in idle  
mode.  
The following options are available:  
Wallpaper list: you can select a background image  
to be displayed on the idle screen.  
To change the background image:  
1. Scroll through the list by pressing the Up or Down  
key.  
You have various preset images available. You  
can also select a blank background, any images  
downloaded from the Internet and the EasyGPRS  
programme, or received in multimedia messages.  
2. Press the Select soft key when the image you  
want highlights.  
3. When the image displays, press the Select soft  
key to display it on the idle screen.  
Text display: you can specify whether or not the  
phone displays text, such as the date and time and  
the service provider’s name.  
96  
 
Phone settings  
Text colour: you can select the colour of the text  
to be displayed on the idle screen.  
Menu style (Menu 5.1.2)  
This menu allows you to select the menu display  
style. You can choose either Bar style or Page  
style  
.
Auto key lock (Menu 5.1.3)  
You can set the phone to automatically lock the  
keys if no key is pressed within a given amount of  
time. This feature is useful to avoid inadvertently  
pressing keys.  
To use this feature, select the length of time for  
which the phone waits before it locks the keypad.  
Contrast (Menu 5.1.4)  
This menu allows you to adjust the contrast of the  
display screen to see it better in different lighting  
conditions.  
Adjust the contrast by using the navigation keys or  
the  
and  
keys on the left side of the phone.  
Backlight (Menu 5.1.5)  
You can select whether or not the phone uses the  
backlight. A marginal increase in standby/talk time  
can be achieved by turning the backlight off.  
Select the length of time the backlight is on. The  
backlight turns on when you press a key or receive  
a call or message, and remains on for the specified  
length of time.  
97  
 
Phone settings  
Graphic logo (Menu 5.1.6)  
This menu allows you to display your service  
provider’s logo instead of its name.  
Off: the service provider’s name displays in idle  
mode.  
On: the service provider’s logo stored in your phone  
displays in idle mode; if no logo has been stored,  
the service provider’s name displays.  
Greeting message (Menu 5.2)  
This menu allows you to set a greeting to be  
displayed briefly when the phone is switched on.  
To  
Press the  
C key and hold it down until  
clear the existing  
message  
the message is cleared.  
enter a new  
message  
appropriate alphanumeric  
keys.  
change the text  
input mode  
right soft key.  
For further details about how to enter characters,  
see page 38.  
Own number (Menu 5.3)  
This feature allows you to:  
• assign a name to each of your own phone  
numbers registered on your SIM card.  
• edit the names and numbers.  
98  
Phone settings  
This function is a memory aid, which you can use to  
check your own phone numbers if you need to do so.  
Any changes made here do not in any way affect  
the actual subscriber numbers on your SIM card.  
Language (Menu 5.4)  
You can select a display language. When the  
language option is set to Automatic, the language  
is automatically selected according to the language  
of the SIM card used.  
Security (Menu 5.5)  
The Security feature enables you to restrict the use  
of your phone to the people and the types of calls of  
your choice.  
Various codes and passwords are used to protect  
the features of your phone. They are described in  
the following sections. Also see pages 140-143.  
PIN check (Menu 5.5.1)  
When the PIN Check feature is enabled, you must  
enter your PIN each time you switch the phone on.  
Consequently, any person who does not have your  
PIN cannot use your phone without your approval.  
Note: Before disabling the PIN Check feature, you  
must enter your PIN.  
To change your PIN, refer to the Change PIN menu  
(Menu 5.5.2).  
99  
     
Phone settings  
The following options are available:  
Disable: the phone connects directly to the  
network when you switch it on.  
Enable: you must enter the PIN each time the  
phone is switched on.  
Change PIN (Menu 5.5.2)  
This feature allows you to change your current PIN  
to a new one, provided that the PIN check feature is  
enabled. You must enter the current PIN before you  
can specify a new one.  
Once you have entered a new PIN, you are asked to  
confirm it by entering it again.  
Phone lock (Menu 5.5.3)  
When the Phone lock feature is enabled, the phone  
is locked and you must enter the 8-digit phone  
password each time the phone is switched on.  
The password is preset to “00000000” at the  
factory. To change the phone password, refer to the  
Change password menu (Menu 5.5.4).  
Once the correct password has been entered, you  
can use the phone until you switch it off.  
The following options are available:  
Disable: you are not asked to enter the phone  
password when you switch the phone on.  
Enable: you are required to enter the phone  
password when you switch the phone on.  
100  
   
Phone settings  
Change password (Menu 5.5.4)  
The Change password feature allows you to change  
your current phone password to a new one. You  
must enter the current password before you can  
specify a new one.  
The password is preset to “00000000” at the  
factory. Once you have entered a new password,  
you are asked to confirm it by entering it again.  
Privacy (Menu 5.5.5)  
Using this menu, you can lock your contents, such  
as mulitmedia messages, your memo list, images,  
and sounds. Once you have locked the contents,  
you must enter the phone password to access the  
associated menus.  
To  
Press the  
select an item to lock Up or Down key. To lock all  
of your contents, select All  
.
place a check mark  
Mark soft key.  
remove a check mark Unmark soft key.  
lock the marked items OK soft key.  
When the phone asks for the phone password,  
enter the password and press the OK soft key.  
Note: The password is preset to “00000000” at the  
factory, To change it, see the Change  
password menu.  
101  
   
Phone settings  
SIM lock (Menu 5.5.6)  
When the SIM lock feature is enabled, your phone  
only works with the current SIM. You must enter  
the SIM lock code.  
Once you have entered the lock code, you are  
asked to confirm it by entering it again.  
To unlock the SIM, you must enter the SIM lock  
code.  
FDN mode (Menu 5.5.7)  
The FDN (Fixed dial number) mode, if supported by  
your SIM card, allows you to restrict your outgoing  
calls to a limited set of phone numbers.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call phone numbers stored in  
Phonebook. You must enter your PIN2.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu is not displayed.  
To change your PIN2, refer to the Change PIN2  
menu (Menu 5.5.8).  
Change PIN2 (Menu 5.5.8)  
The Change PIN2 feature allows you to change your  
current PIN2 to a new one. You must enter the  
current PIN2 before you can specify a new one.  
Once you have entered a new PIN2, you are asked  
to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card  
does not, this menu is not displayed.  
102  
 
Phone settings  
Extra settings (Menu 5.6)  
You can turn the automatic redialling or answering  
features on or off.  
To turn a feature Press the  
on  
On soft key or  
key.  
A check mark displays next  
to the option.  
off  
Off soft key or  
key.  
The check mark no longer  
displays.  
The following options are available:  
Auto redial: when this option is checked, the  
phone makes up to ten attempts to redial a phone  
number after an unsuccessful call.  
Note: The interval between two call attempts varies.  
Anykey answer: when this option is checked, you  
can answer an incoming call by pressing any key,  
except the  
key and the Reject soft key. To  
reject the call, press the  
key.  
key or the Reject soft  
When this option is unchecked, you can only press  
the key or Accept soft key.  
103  
 
Phone settings  
Short cut (Menu 5.7)  
The navigation keys can be used as shortcut keys.  
In idle mode, they allow you to access specific  
menus directly.  
To assign a shortcut to a key:  
1. Select the key to be used as a shortcut key by  
pressing the Up or Down key, and press the  
Select soft key or Right key.  
2. Select the menu to be assigned to the key by  
pressing the Up or Down key.  
Note: To deactivate a shortcut key, select the  
None option.  
3. Press the Select soft key to save the selection.  
Reset settings (Menu 5.8)  
You can easily reset your phone to its default  
settings. To reset your phone:  
1. Select the Reset settings menu.  
2. Enter the 8-digit phone password and press the  
OK soft key.  
Note: The password is preset to “00000000.” To  
change this password, see page 101.  
104  
 
Organiser  
The Organiser feature enables you to:  
• set an alarm so that the phone rings at a specific  
time, such as to remind you of an appointment.  
• view the calendar and organise your schedule.  
• set the current date and time.  
• define a list of things to do.  
• use the phone as a calculator for basic  
mathematical equations or currency exchange  
operations.  
• record voice memos.  
Alarm (Menu 6.1)  
This feature allows you to:  
• set an alarm to sound at a specific time.  
• set the phone to switch on automatically and  
sound the alarm even if the phone is off.  
The following options are available:  
One time alarm: the alarm sounds only once and  
is then deactivated.  
Daily alarm: the alarm sounds every day at the  
same time.  
Morning call: the alarm sounds to wake you up in  
the morning.  
To set an alarm:  
1. Choose the type of alarm to be set and press the  
Select soft key.  
105  
 
Organiser  
2. Enter the time for the alarm to sound.  
Note: Your phone is preset to use 24-hour format.  
To change the format, see page 109.  
If you want to use the alarm options, press the  
Options soft key. The following options are  
available:  
Remove alarm: deactivates the current  
alarm.  
Alarm tone: allows you to select the alarm  
tone.  
3. Press the OK soft key.  
4. If you select Morning call in Step 1, choose the  
repeat option, Monday to friday or Monday to  
saturday, and press the Select soft key.  
To stop the alarm when it sounds, press the Exit  
soft key.  
Remove alarm: deactivates all alarm settings.  
Autopower: when this option is set to Enable, the  
alarm sounds at the specified time, even if the  
phone is off.  
If the menu option is set to Disable and the phone  
is off at the specified time, the alarm does not  
sound.  
Calendar (Menu 6.2)  
With the Calendar feature, you can:  
• consult the calendar to check your memos.  
• write memos to keep track of your schedule.  
• trigger an alarm, if necessary.  
106  
Organiser  
Consulting the calendar  
When you select the Calendar menu (Menu 6.2),  
the calendar displays. The following options are  
available when you press the Options soft key:  
Search all: displays all memos, starting with the  
oldest. To scroll through the memos, press the Left  
or Right key.  
Delete all: allows you to delete all of the memos.  
You are asked to confirm your action.  
Go to date: allows you to go to a specific date.  
Exit: exits the Calendar feature and returns to idle  
mode.  
Writing a memo  
You can make up to 30 memos for one day.  
To write or edit a memo on a specific date:  
1. Select a date on the calendar, using the  
navigation keys.  
Note: To skip to the previous or next month,  
press the  
or  
key on the left side of  
the phone.  
2. Press the Select soft key.  
An empty memo screen displays allowing you to  
enter your memo.  
3. Enter your memo and then press the OK soft  
key.  
Note: For further details about how to enter  
characters, see page 38.  
You are asked if you wish to set an alarm.  
107  
Organiser  
4. If you want an alarm to sound on the chosen  
day, press the Yes soft key.  
Otherwise, press the No soft key. The memo is  
saved.  
5. If you pressed the Yes soft key, enter the time  
for the alarm and press the OK soft key.  
You can also select the melody for the alarm by  
pressing the Melody soft key.  
The colour of the date on the calendar changes to  
purple to indicate that a memo exists on this day.  
Viewing a memo  
When you select a day for which a memo already  
exists on the calendar, the latest memo for the day  
displays.  
If more than one memo is stored, press the Left or  
Right key to scroll to the previous or next memo.  
Press the New soft key to add a new memo to the  
day.  
You can use the following options by pressing the  
Options soft key:  
Edit: allows you to change the memo text.  
Alarm: allows you to set an alarm to sound at a  
specified time. If you set the alarm earlier, you can  
change or delete it.  
Delete: allows you to delete the memo.  
Copy to: allows you to copy the memo to another  
date.  
Move to: allows you to change the date of the  
memo.  
108  
Organiser  
Time & Date (Menu 6.3)  
This menu allows you to change the current time  
and date displayed. You can also use this option to  
find out what time it is in another part of the world.  
The following options are available:  
Set time: allows you to enter the current time. You  
can choose the time format in the Time format  
menu (Menu 6.3.4). See below.  
Note: Before setting the time, you must specify your  
time zone, in the World time menu (Menu  
6.3.3).  
Set date: allows you to enter the day, month, and  
year.  
World time: allows you to find out what time it is  
in another part of the world, using the Left and  
Right keys.  
The screen shows the:  
• city name.  
• current date and time.  
• time difference between the selected city and  
your city if you have set the local time (see below  
for further details) or GMT (by default).  
To select your time zone:  
1. Select the city corresponding to your time zone  
by pressing the Left or Right key one or more  
times.  
The local date and time display.  
2. Press the Set soft key.  
Time format: allows you to change the time  
format to 24 hours or 12 hours  
.
109  
 
Organiser  
Calculator (Menu 6.4)  
With this feature, you can use the phone as a  
calculator. The calculator provides the basic  
arithmetic functions: addition, subtraction,  
multiplication, and division.  
1. Enter the first number using the numeric keys.  
Notes  
To delete mistakes or clear the display, press the  
key.  
:
C
To include a decimal point or a bracket, press the  
left soft key until the symbol you want displays.  
2. Press the navigation keys until the required  
arithmetic symbol appears:  
+
(addition),  
-
(subtraction), (multiplication),  
/
(division).  
3. Enter the second number.  
4. To view the result, press the  
key.  
5. Repeat steps 1 to 4 as many times as required.  
To do list (Menu 6.5)  
This feature allows you to:  
• enter a list of tasks to be done.  
• assign a priority and a deadline to each task.  
• sort the tasks by priority and status.  
Creating the to do list  
1. Press the New soft key.  
110  
Organiser  
2. Enter the first task.  
Note: For further details about how to enter  
characters, see page 38.  
3. Press the OK soft key.  
4. Select high, normal, or low priority using the Up  
or Down key, and press the Select soft key.  
5. Enter your deadline and press the OK soft key.  
If you do not want to set a deadline, press the  
Skip soft key.  
Editing the To do list  
When you select the To do list menu (Menu 6.5),  
the current contents display with the status mark  
and priority:  
for Low.  
for High,  
for Normal, and  
To view the  
details for a  
specific task  
highlight the task.  
press the View soft key.  
scroll through the task using  
the Up and Down keys, if  
necessary.  
To change the  
status of a  
highlight the task.  
press the  
key to mark the  
specific task  
task as completed as of the  
current date and time.  
or  
highlight the task.  
press the Options soft key.  
select the Mark option.  
select the appropriate status  
(Done or Not done).  
111  
Organiser  
To create a new  
task  
press the Options soft key.  
select the New option.  
enter the text, priority, and/  
or deadline for the task.  
To edit an  
existing  
task  
highlight the task.  
press the Options soft key.  
select the Edit option.  
change the text, priority,  
and/or deadline for the task,  
as required.  
To sort  
existing  
tasks by priority  
or status  
press the Options soft key.  
select the Sort option.  
select the sort criterion  
(
High  
,
Low, Done, or Not  
done).  
To copy a task  
highlight the task.  
press the Options soft key.  
select the Copy option.  
change the text, priority,  
and/or deadline for the task,  
as required.  
To copy a task to  
the calendar  
highlight the task.  
press the Options soft key.  
select the Copy to calendar  
option.  
change the text and deadline  
for the task and set the  
alarm, as required.  
To delete a task  
highlight the task.  
press the Options soft key.  
select the Delete option.  
112  
Organiser  
To delete all  
tasks  
press the Options soft key.  
select the Delete all option.  
confirm the deletion by  
pressing the OK soft key.  
To exit the To do  
list  
press the Options soft key.  
select the Exit option.  
Voice memo (Menu 6.6)  
You can record up to 5 voice memos of 30 seconds  
each. After recording, you can send a voice memo  
to other people using the multimedia message  
service.  
Voice record (Menu 6.6.1)  
This menu allows you to record a new memo. When  
you select this option, the display shows the 30-  
second timer.  
1. To start recording, press the Record soft key.  
2. Record a memo by speaking into the  
microphone.  
3. When you press the Stop soft key or the  
recording time expires, the following options  
display:  
Replay: plays back your memo.  
Re-record: discards the memo and enables  
you to record another one.  
Save: allows you to save the memo.  
Quit: cancels your recording and exits the  
Voice record menu.  
113  
Organiser  
4. To save the memo, choose Save from the options  
and press the Select soft key.  
5. Press the  
C
key to clear the default name, if  
necessary, and enter a name for the memo.  
For further details about how to enter characters,  
see page 38.  
6. Press the OK soft key.  
The memo is saved and then the display shows  
the memo information.  
7. Press the Options soft key to use the following  
memo options:  
Send: allows you to send the memo to other  
people by using the MMS feature. Follow the  
procedure on page 79.  
Rename: allows you to change the memo’s  
name.  
Delete: deletes the memo.  
8. To exit, press the  
C
or  
key.  
Memo list (Menu 6.6.2)  
This menu shows your voice memo list. Scroll to a  
memo and press the Options soft key. The following  
options are available:  
Play: plays back the memo.  
Send: allows you to send the memo to other people  
by using the MMS feature. See page 79 for further  
details about sending a message.  
Rename: allows you to change the memo’s name.  
Information: displays information about the memo,  
such as name, date, time, and recording duration.  
114  
Organiser  
Delete: deletes the memo.  
Delete all (Menu 6.6.3)  
In this menu, you can delete all of your voice  
memos.  
When the confirming message appears, press the  
Yes soft key. To cancel the deletion, press the No  
soft key.  
Memory status (Menu 6.6.4)  
In this menu, you can check the memory status for  
voice memos. The display shows the total space,  
including free and used space. It also displays the  
number of the memos you have recorded and the  
total number you can record.  
Currency exchange (Menu 6.7)  
Using this menu, you can make currency  
conversions.  
1. Enter the current exchange rate of your source  
currency and press the OK soft key.  
You can insert a decimal point by pressing  
the  
key.  
2. Enter the amount to convert and press the OK  
soft key.  
The amount you entered and its equivalent  
value display.  
3. Press the  
key to exit the currency convertor.  
115  
Network services  
These menu functions are network services. Please  
contact your service provider to check their  
availability and subscribe to them, if you wish.  
Call diverting (Menu 7.1)  
This network service enables incoming calls to be  
rerouted to the number that you specify.  
Example: You may wish to divert your business calls  
to a colleague while you are on holiday.  
Call diverting can be set up in the following ways:  
Divert always: all calls are diverted.  
Busy: calls are diverted when you are already on  
another call.  
No reply: calls are diverted when you do not  
answer the phone.  
Unreachable: calls are diverted when you are not  
in an area covered by your service provider.  
Cancel all: all call diverting options are cancelled.  
You can specify individual diverting options for each  
of the following call types:  
• Voice calls only  
• Data calls only  
116  
 
Network services  
To set your call diverting options:  
1. Select the type of call diverting by pressing the  
Up or Down key, and then press the Select soft  
key.  
2. Select the type of calls to be diverted by  
pressing the Up or Down key, and then press the  
Select soft key.  
The current status displays. If the option has  
already been set, the number to which the calls  
are diverted displays.  
3. To  
Press the  
activate call  
diverting  
Activate soft key.  
Go to Step 4.  
change the number Change soft key.  
to be called  
Go to Step 4.  
deactivate call  
diverting  
Remove soft key.  
4. Enter the number to which the calls are to be  
diverted and press the OK soft key.  
To enter an international code, press and hold  
the  
0
key until the  
+
sign displays.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can deactivate all call diverting settings by  
selecting the Cancel all option.  
117  
Network services  
Call barring (Menu 7.2)  
The call barring network service allows you to  
restrict your calls.  
Call barring can be set up in the following ways:  
All outgoing: calls cannot be made.  
International: international calls cannot be made.  
International except to home: when abroad,  
calls can be made only to numbers within the  
current country and to your home country, which is  
the country where your home network provider is  
located.  
All incoming: calls cannot be received.  
Incoming while abroad: calls cannot be received  
when you are using your phone outside of your  
home service area.  
Cancel all: all call barring settings are deactivated;  
calls can be made and received normally.  
You can specify individual barring options for each  
of the following call types:  
• Voice calls  
• Data calls  
To set your call barring options:  
1. Select the type of call barring by pressing the Up  
or Down key, and then press the Select soft  
key.  
2. Select the type of calls to be barred by pressing  
the Up or Down key, and then press the Select  
soft key.  
118  
 
Network services  
3. Press the Activate soft key to confirm your  
settings.  
4. Enter the call barring password supplied by your  
service provider.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
To deactivate specific call barring settings:  
1. Select the call barring option to be deactivated.  
2. Select the type of call to which this option  
applies.  
3. Press the Deactivate soft key.  
4. Enter the call barring password supplied by your  
service provider.  
The phone sends your settings to the network  
and the network’s acknowledgement displays.  
You can also deactivate all call barring settings by  
selecting the Cancel all option.  
Change barring password: you can set and  
change the call barring password obtained from  
your service provider using this option. You must  
enter the current password before you can specify a  
new one.  
Once you have entered a new password, you are  
asked to confirm it by entering it again.  
119  
Network services  
Call waiting (Menu 7.3)  
This network service informs you when someone is  
trying to reach you while you are on another call.  
You can specify individual call waiting options for  
each of the following call types:  
• Voice calls  
• Data calls  
To set your call waiting options:  
1. Select the type of calls to which you want to  
apply the call waiting option by pressing the Up  
or Down key, and then press the Select soft  
key.  
The screen informs you whether call waiting is  
activated or deactivated.  
2. You can activate or deactivate the call waiting  
feature as necessary by using the Activate or  
Deactivate soft key respectively.  
To return to the previous screen, press the Exit  
soft key.  
You can also deactivate all call waiting settings by  
selecting the Cancel all option.  
120  
 
Network services  
Network selection (Menu 7.4)  
The Network selection feature enables you to  
manually select the network used when roaming  
outside your home network’s service area, or to let  
the phone automatically select the roaming  
network.  
Note: You can select a network other than your home  
network only if there is a valid roaming  
agreement between them.  
To set whether to automatically or manually select  
the network when roaming:  
1. When Network selection displays, press the  
Select soft key.  
2. Press the Up or Down key until the appropriate  
option highlights and then press the OK soft  
key.  
If you select Automatic, you are connected to  
the first available network when roaming.  
If you select Manual, the phone scans for  
available networks. Go to Step 3.  
3. Press the Up or Down key until the preferred  
network highlights and then press the OK soft  
key.  
You are connected to that network.  
121  
Network services  
Caller ID (Menu 7.5)  
You can prevent your phone number from being  
displayed on the phone of the person being called.  
Note: Some networks do not allow the user to change  
this setting.  
The following options are available:  
Default: the default setting provided by the  
network is used.  
Hide number: your number does not display on  
the other person’s phone.  
Send number: your number is sent each time you  
make a call.  
Closed user group (CUG) (Menu 7.6)  
This network service allows incoming and outgoing  
calls to be restricted to a selected user group. You  
may be a member of up to ten user groups.  
For details on how to create, activate, and use a  
closed user group, contact your service provider.  
Example: A company lends SIM cards to its  
employees and wants to restrict outgoing  
calls to members of the same team.  
122  
Network services  
Activating a closed user group  
If you select the Closed user group menu, you  
can enter the CUG function. You can now access the  
following options after pressing the Select soft key:  
Index list: lets you list, add, or delete CUG index  
numbers. The list of current CUG indexes appears.  
Add a new CUG index as advised by your service  
provider or delete a group.  
To  
Press the  
scroll through the Up or Down key.  
existing CUG  
indexes  
add a new CUG  
index  
Options soft key and select  
the Add option. Enter the  
index and press the OK soft  
key.  
delete a CUG  
index  
Options soft key and select  
the Delete option.  
activate a CUG  
index  
Options soft key and select  
the Activate option.  
123  
Network services  
Outside access: lets you enable or disable calls to  
numbers other than those in the closed user group.  
This feature depends on the nature of your CUG  
subscription. Please check with your service  
provider.  
Default group: you may set a default CUG with  
your service provider. If you have done so, you can  
enable the Default group option on your phone.  
When making a call, you are given the option of  
using your default CUG, instead of selecting one  
from the list.  
Deactivate: deactivates the CUG function. This  
menu appears only when the default group is  
enabled or a CUG index is selected.  
124  
Funbox  
The Funbox menu contains several amusement  
options.  
WAP browser (Menu 8.1)  
Your phone is equipped with a WAP (Wireless  
Application Protocol) browser to allow you to access  
and navigate the Wireless Web via your phone.  
Home (Menu 8.1.1)  
Selecting this menu connects the phone to the  
network and loads the homepage of the Wireless  
Web service provider. You can also press the  
in idle mode.  
key  
The content of the WAP Browser startup homepage  
depends on your Wireless Web service provider. To  
scroll through the screen, use the Up or Down keys.  
Note: To access the startup homepage from any other  
screen in the WAP browser, use the Home  
option. For further details about the WAP  
Browser menus, see page 127.  
Exiting the WAP browser  
To exit the browser at any time, simply press the  
key.  
125  
 
Funbox  
Navigating the WAP browse  
r
To  
Press the  
scroll through and Up or Down key until the  
select browser  
items  
symbol  
points to the item,  
and then press the Select  
soft key to confirm the  
selection.  
select a numbered corresponding numeric key.  
item  
return to the  
previous page  
Back soft key or the  
C
key.  
return to the  
key and select the Home  
startup homepage option. For further details  
about this option, see  
page 127.  
Entering text in the WAP browser  
When you are prompted to enter text, the current  
text entry mode is indicated on the screen.  
The following modes are available:  
Upper-case character  
(A): allows you to enter  
upper-case English characters.  
Lower-case character ): allows you to enter  
lower-case English characters.  
T9 ): allows you to enter English characters by  
pressing one key per letter. In this mode, you can  
use the key to display alternative words. To change  
the case, press the key.  
Number ): allows you to enter numbers.  
(a  
(
0
(1  
126  
 
Funbox  
To change  
modes  
press the  
times.  
key one or more  
key.  
To enter a  
space  
press the  
To edit text  
set the cursor to the right of  
the character(s) to be  
corrected.  
press the  
enter the correct character(s).  
C
key as required.  
Selecting and using browser menu options  
Various menu options are available when you are  
using the WAP browser to navigate the Wireless  
Web.  
To access a menu option:  
1. Press the  
key.  
A menu list displays.  
2. Highlight a menu by pressing the Up or Down  
key.  
3. Select an option by pressing the Select soft key.  
4. If necessary, select the secondary option using  
the Up or Down keys, and press the Select soft  
key to confirm.  
Note: Menus may vary, depending on your version of  
the WAP browser.  
127  
 
Funbox  
The following options are available:  
Reload: reloads the current page.  
Home: takes you back at any time to the home  
page of the Wireless Web service provider.  
Goto URL: allows you to manually enter the URL  
address of a Web page. After entering an address,  
press the OK soft key to go there directly.  
Show URL: displays the URL address of the Web  
page to which you are currently connected. It also  
enables you to set the current site as the startup  
home page.  
To  
Press the  
set the current  
page as your  
Option soft key, select the  
Save to home option, and  
startup home page press the Select soft key.  
set a bookmark for Option soft key, select the  
the current page  
Save to bookmark option,  
and press the Select soft  
key.  
cancel your setting Back soft key.  
Edit home: allows you to change the startup home  
page manually. Enter the URL and press the OK  
soft key. For further details about entering text, see  
page 126.  
Clear cache: deletes the information stored in the  
cache, which stores the most recently accessed  
Web pages.  
Inbox: allows you to read messages received from  
the web server.  
128  
Funbox  
Favorite (Menu 8.1.2)  
This menu allows you to store the URL addresses of  
up to ten of your favourite web sites. You can  
access this menu directly by pressing and holding  
the  
key while using the WAP browser.  
To store a URL address:  
1. Select an empty location and press the Select  
soft key.  
2. Enter the address and press the Enter soft key.  
For further details about how to enter  
characters, see page 38.  
3. Enter a name for the favorite item and press the  
Enter soft key.  
After saving items, you can use the following  
options by pressing the Select soft key:  
Go to URL: quickly accesses that site.  
Edit: allows you to edit the address.  
Delete: deletes the address.  
http:// (Menu 8.1.3)  
This menu allows you to manually enter the URL  
address of the Web site that you wish to access. You  
can access this menu directly by pressing and  
holding the  
key in the WAP browser.  
For further details about how to enter characters,  
see page 38.  
129  
Funbox  
Settings (Menu 8.1.4)  
This menu allows you to set up five proxy servers  
for the WAP browser. Contact your service provider  
for details about your Settings options.  
For each server, the following options are available:  
Profile name: enter a name that you wish to  
assign to the HTTP proxy server.  
Homepage URL: set the address of your startup  
homepage. When the default homepage displays,  
you can delete it using the  
own choice.  
C
key and enter your  
Security: select a data transmission mode. Choose  
Secure to protect your data against unauthorised  
access; otherwise, choose Non-secure  
.
Bearer: select a bearer to be used for each type of  
network address accessed: GPRS or Data  
When the bearer is set to GPRS  
.
:
IP address: enter the WAP gateway address  
required to connect to the Internet.  
User name: enter the User ID required to connect  
to the GPRS network.  
Password: enter the password required to connect  
to the GPRS network.  
APN: enter the access point name used for the  
address of the GPRS network gateway.  
When the bearer is set to Data  
:
IP address: enter the WAP gateway address  
required to connect to the Internet.  
Login name: enter the PPP server login ID.  
130  
Funbox  
Password: enter the PPP server password.  
Dial-up number: enter the PPP server phone  
number.  
Data call type: select a data call type: Analogue  
or ISDN  
.
Note: The WAP browser settings may vary, depending  
on the service provider. Contact your service  
provider for further details.  
Clear cache (Menu 8.1.5)  
You can clear the information stored in the cache,  
the phone’s temporary memory which stores the  
most recently accessed Web pages.  
Press the Yes soft key to confirm the deletion.  
Otherwise, press the No soft key.  
Push message (Menu 8.1.6)  
In this menu, you can receive and access web  
messages from the server.  
The following options are available:  
Inbox: allows you to read the messages received  
from the web server.  
Receive: allows you to set whether or not your  
phone receives web messages.  
Delete all: allows you to delete all of the web  
messages you have received.  
131  
Funbox  
Games (Menu 8.2)  
You can download MIDlets (Java applications  
running on mobile phones) from various sources  
using the WAP browser and store them in your  
phone.  
When you access the Games menu, the list of the  
default games appears. Once you have downloaded  
games, they are added to the list.  
Note: Java services may be unavailable depending  
upon the service provider.  
Launching a MIDlet  
1. Scroll to the MIDlet you want on the Application  
list and press the Launch soft key.  
2. Start the MIDlet using the soft keys.  
Viewing MIDlet information  
1. Scroll to the MIDlet you want and press the Info  
soft key.  
The display shows information about the MIDlet,  
such as file size, application version, and its  
vendor.  
2. To scroll to other MIDlet information, press  
the Up or Down key.  
3. If you want to delete the MIDlet, press the  
Delete soft key and then press the Yes soft key  
to confirm the deletion.  
Note: When you select the default games from  
the list, the Delete option is not available,  
so that you cannot delete them.  
132  
Funbox  
4. To exit and return to the Application screen,  
press the Back soft key or the  
C
key.  
Changing the DNS settings  
The DNS (Domain Name Server) is the server that  
resolves the Java server domain name into the IP  
address. The DNS setting is preset at the factory,  
but sometimes you may need to change it at your  
service provider’s instructions.  
1. Scroll to Setting on the Applications list and  
press the Select soft key.  
2. Enter the primary address using the number  
keypad and press the OK soft key.  
3. Enter the secondary address and press the OK  
soft key.  
Entering text  
To enter text while using a MIDlet, the following  
input modes are available:  
Upper-case character  
(A): allows you to enter  
upper-case English characters.  
Lower-case character ): allows you to enter  
lower-case English characters.  
Number ): allows you to enter numbers.  
(a  
(1  
Symbol: allows you to enter symbols. After  
highlighting a symbol by pressing the navigation  
keys, press the  
T9 ): allows you to enter English characters by  
pressing one key per letter. In this mode, you can  
change the case by pressing the key.  
To change the text input mode, press the  
key to insert it.  
(
0
key  
until the appropriate indicator appears on the soft  
key area of the display.  
133  
Funbox  
Sounds (Menu 8.3)  
In this menu, you can view the list of sounds  
downloaded from the web server or received in  
multimedia messages. You can set the downloaded  
sounds as the current ring tone or send them to  
other phones.  
By pressing the Options soft key, you can use the  
following options:  
Rename: allows you to change the name of the  
sound.  
Delete: deletes the sound.  
Set as ring tone: sets the sound as your ring tone.  
Images (Menu 8.4)  
In this menu, you can view the list of pictures  
downloaded from the web server or received in  
messages. You can set the downloaded pictures as  
the current background image or send them to  
other phones.  
By pressing the Options soft key, you can use the  
following options:  
Rename: allows you to change the name of the  
image.  
Delete: deletes the image.  
Set as wallpaper: sets the image as your  
wallpaper.  
134  
Funbox  
Delete all (Menu 8.5)  
This menu allows you to delete all of the  
downloaded items in the Games, Sounds, and  
Images folders. You can also delete all of the items  
at one time.  
To  
Press the  
select a folder to  
clear  
Up or Down key. To delete  
all of your items, select All  
.
place a check mark  
Mark soft key.  
remove a check mark Unmark soft key.  
delete the marked  
items  
Delete soft key.  
When a confirming message displays, press the Yes  
soft key to confirm.  
Memory status (Menu 8.6)  
You can check the memory status for games or  
sounds and images. The display shows the total,  
free, and used space, as well as the number of  
objects you have downloaded.  
135  
SIM AT  
If you use a SAT card that provides additional  
services, the SAT menu displays. For further details,  
see your SIM card instructions.  
Shown only if it is supported by your SIM card.  
136  
 
Solving problems  
Before calling for service, perform the following  
simple checks for the problems listed. You may save  
the time and expense of an unnecessary service  
call.  
When you switch your phone on, the  
following messages may appear:  
Insert SIM card  
• Check that the SIM card is correctly installed.  
Phone locked: enter password  
• The automatic locking function has been enabled.  
You must enter the phone’s password before you  
can use the phone.  
Enter PIN  
• You are using your phone for the first time. You  
must enter the Personal Identification Number  
(PIN) supplied with the SIM card.  
• The PIN Check feature is enabled. Every time the  
phone is switched on, the PIN has to be entered.  
To disable this feature, use the PIN check menu  
(Menu 5.5.1).  
Enter PUK  
• The PIN code was entered incorrectly three times  
in succession and the phone is now blocked.  
Enter the PUK supplied by your network operator.  
137  
Solving problems  
“No service,” “Network failure,” or “Not  
done” displays  
• The network connection has been lost. You may  
be in a weak signal area (in a tunnel or  
surrounded by buildings). Move and try again.  
• You are trying to access an option for which you  
have not taken out a subscription with your  
service provider. Contact the service provider for  
further details.  
You have entered a number but it was  
not dialled  
• Have you pressed the  
key?  
• Are you accessing the right cellular network?  
• You may have set an outgoing call barring option.  
Your correspondent cannot reach you  
• Is your phone switched on (the  
for more than one second)?  
key pressed  
• Are you accessing the right cellular network?  
• You may have set an incoming call barring option.  
Your correspondent cannot hear you  
speaking  
• Have you switched off the microphone?  
• Are you holding the phone close enough to your  
mouth? The microphone is located at the bottom  
of the phone.  
138  
Solving problems  
The phone starts beeping and  
“**Warning** Low battery” flashes on  
the display  
• Your battery is insufficiently charged. Recharge  
the battery.  
The audio quality of the call is poor  
• Check the signal strength indicator on the display  
(
); the number of bars indicates the signal  
strength from strong ( ) to weak ( ).  
Try moving the phone slightly or moving closer to  
a window if you are in a building.  
No number is dialled when you recall a  
Phonebook entry  
• Check that the number has been stored correctly  
by using the Phonebook Search feature.  
• Re-store the number, if necessary.  
If the above guidelines do not help you to solve  
the problem, take note of:  
• the model and serial numbers of your phone  
• your warranty details  
• a clear description of the problem  
Then contact your local dealer or Samsung after-  
sales service.  
139  
Access codes  
There are several access codes that are used by  
your phone and its SIM card. These codes help  
protect the phone against unauthorised use.  
When any of the codes explained below are  
requested, enter the appropriate code (displayed as  
asterisks) and press the OK soft key. If you make a  
mistake, press the  
C
key one or more times until  
the incorrect digit is cleared and then continue  
entering the correct code.  
The access codes, except for the PUK and PUK2  
codes, can be changed using the Security menu  
(Menu 5.5). See page 99 for further details.  
Important! Avoid using access codes resembling  
emergency numbers, such as 112, so  
that you do not accidentally dial an  
emergency number.  
Phone password  
The Phone lock feature uses the phone password to  
protect your phone against unauthorised use. The  
phone password is supplied with the phone and is  
preset to “00000000” at the factory.  
To  
See  
activate/deactivate the  
Phone lock feature  
page 100  
(
Menu 5.5.3).  
page 101  
Menu 5.5.4).  
change the phone  
password  
(
140  
   
Access codes  
PIN  
The  
Personal  
I
dentification  
Number or PIN (4 to  
8 digits) protects your SIM card against  
unauthorised use. It is usually supplied with the  
SIM card.  
If you enter an incorrect PIN three times in  
succession, the code is disabled and cannot be used  
until you re-enable it by entering the PUK (see  
below).  
To  
See  
activate/deactivate the  
PIN check feature  
page 99  
(
Menu 5.5.1).  
page 100  
Menu 5.5.2).  
change the PIN  
(
PUK  
The 8-digit PUK (  
PIN  
Unblocking  
Key) is required to  
change a disabled PIN. The PUK may be supplied  
with the SIM card. If not, or if you have lost it,  
contact your service provider.  
To re-enable your PIN:  
1. Enter the PUK and press the OK soft key.  
2. Enter a new PIN of your choice and press the OK  
soft key.  
3. When the Confirm new PIN message displays,  
enter the same code again and press the OK  
soft key.  
If you enter an incorrect PUK ten times in  
succession, the SIM card becomes invalid. Contact  
your service provider for a new card.  
141  
Access codes  
PIN2  
The PIN2 (4 to 8 digits), supplied with some SIM  
cards, is required to access specific functions, such  
as setting the maximum cost of a call. These  
functions are available if supported by your SIM  
card.  
If you enter an incorrect PIN2 three times in  
succession, the code is disabled and you cannot  
access the functions until you re-enable it by  
entering the PUK2.  
To change the PIN2, see page 102 (Menu 5.5.8).  
PUK2  
The 8-digit PUK2 (  
PIN  
Unblocking  
Key  
2), supplied  
with some SIM cards, is required to change a  
disabled PIN2. If you lose the code, contact your  
service provider.  
To re-enable your PIN2:  
1. Enter the PUK2 and press the OK soft key.  
2. Enter a new PIN2 of your choice and press the  
OK soft key.  
3. When the Confirm PIN2 message displays,  
enter the same code again and press the OK  
soft key.  
If you enter an incorrect PUK2 ten times in  
succession, you will not be able to access the  
functions requiring the PIN2. Contact your service  
provider for a new card.  
142  
 
Access codes  
Barring password  
A 4-digit barring password is required when you use  
the call barring function. You can obtain the  
password from your service provider when you  
subscribe to this function.  
You can change this password in the Call barring  
menu (Menu 7.2). See page 118 for further  
details.  
143  
 
Health and safety  
information  
SAR certification information  
This phone meets European Union (EU)  
requirements concerning exposure to radio waves.  
Your mobile phone is a radio transmitter and  
receiver. It is designed and manufactured so as not  
to exceed the limits for exposure to radio-frequency  
(RF) energy, as recommended by the EU Council.  
These limits are part of comprehensive guidelines  
and establish permitted levels of RF energy for the  
general population. The guidelines were developed  
by independent scientific organisations through the  
periodic and thorough evaluation of scientific  
studies. The limits include a substantial safety  
margin designed to ensure the safety of all persons,  
regardless of age and health.  
The exposure standard for mobile phones employs  
a unit of measurement known as SAR (Specific  
Absorption Rate). The SAR limit recommended by  
the EU Council is 2.0W/kg.*  
The highest SAR value for this model phone was  
0.789 W/kg.  
* The SAR limit for mobile phones used by the public is 2.0  
watts/kilogram (W/kg) averaged over ten grams of body  
tissue. The limit incorporates a substantial margin of safety to  
give additional protection for the public and to account for any  
variations in measurements. The SAR values may vary  
depending on national reporting requirements and the  
network band.  
144  
 
Health and safety information  
SAR tests are conducted using standard operating  
positions with the phone transmitting at its highest  
certified power level in all tested frequency bands.  
Although the SAR is determined at the highest  
certified power level, the actual SAR level of the  
phone while operating can be well below the  
maximum value. This is because the phone is  
designed to operate at multiple power levels so as  
to use only the power required to reach the  
network. In general, the closer you are to a base  
station, the lower the power output of the phone.  
Before a new model phone can be made available  
for sale to the public, compliance with the European  
R&TTE Directive must be shown. This directive  
includes as one of its essential requirements the  
protection of the health and safety of the user and  
any other person.  
Precautions when using batteries  
• Never use any charger or battery that is damaged  
in any way.  
• Use the battery only for its intended purpose.  
• If you use the phone near the network’s base  
station, it uses less power; talk and standby time  
are greatly affected by the signal strength on the  
cellular network and the parameters set by the  
network operator.  
• Battery charging time depends on the remaining  
battery charge and the type of battery and  
charger used. The battery can be charged and  
discharged hundreds of times, but it will gradually  
wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal,  
it is time to buy a new battery.  
145  
Health and safety information  
• If left unused, a fully charged battery will  
discharge itself over time.  
• Use only Samsung-approved batteries and  
recharge your battery only with Samsung-  
approved chargers. When a charger is not in use,  
disconnect it from the power source. Do not leave  
the battery connected to a charger for more than  
a week, since overcharging may shorten its life.  
• Extreme temperatures will affect the charging  
capacity of your battery: it may require cooling or  
warming first.  
• Do not leave the battery in hot or cold places,  
such as in a car in summer or winter conditions,  
as you will reduce the capacity and lifetime of the  
battery. Always try to keep the battery at room  
temperature. A phone with a hot or cold battery  
may temporarily not work, even when the battery  
is fully charged. Li-ion batteries are particularly  
affected by temperatures below 0 °C (32 °F).  
• Do not short-circuit the battery. Accidental short-  
circuiting can occur when a metallic object (coin,  
clip or pen) causes a direct connection between  
the + and – terminals of the battery (metal strips  
on the battery), for example when you carry a  
spare battery in a pocket or bag. Short-circuiting  
the terminals may damage the battery or the  
object causing the short-circuiting.  
• Dispose of used batteries in accordance with local  
regulations. Always recycle. Do not dispose of  
batteries in a fire.  
146  
Health and safety information  
Road safety  
Your wireless phone gives you the powerful ability  
to communicate by voice, almost anywhere,  
anytime. But an important responsibility  
accompanies the benefits of wireless phones, one  
that every user must uphold.  
When driving a car, driving is your first  
responsibility. When using your wireless phone  
behind the wheel of a car, make sure that you are  
following the special regulations of the given area or  
country.  
Operating environment  
Remember to follow any special regulations in force  
in any area and always switch off your phone  
whenever it is forbidden to use it, or when it may  
cause interference or danger.  
When connecting the phone or any accessory to  
another device, read its user’s guide for detailed  
safety instructions. Do not connect incompatible  
products.  
As with other mobile radio transmitting equipment,  
users are advised that for the satisfactory operation  
of the equipment and for the safety of personnel, it  
is recommended that the equipment should only be  
used in the normal operating position (held to your  
ear with the antenna pointing over your shoulder).  
147  
Health and safety information  
Electronic devices  
Most modern electronic equipment is shielded from  
radio frequency (RF) signals. However, certain  
electronic equipment may not be shielded against  
the RF signals from your wireless phone. Consult  
the manufacturer to discuss alternatives.  
Pacemakers  
Pacemaker manufacturers recommend that a  
minimum distance of 15 cm (6 inches) be  
maintained between a wireless phone and a  
pacemaker to avoid potential interference with the  
pacemaker. These recommendations are consistent  
with the independent research and  
recommendations of Wireless Technology Research.  
Persons with pacemakers:  
• Should always keep the phone more than 15 cm  
(6 inches) from their pacemaker when the phone  
is switched on  
• Should not carry the phone in a breast pocket  
• Should use the ear opposite the pacemaker to  
minimise potential interference  
If you have any reason to suspect that interference  
is taking place, switch your phone off immediately.  
Hearing aids  
Some digital wireless phones may interfere with  
some hearing aids. In the event of such  
interference, you may wish to consult your hearing  
aid manufacturer to discuss alternatives.  
148  
Health and safety information  
Other medical devices  
If you use any other personal medical devices,  
consult the manufacturer of your device to  
determine if it is adequately shielded from external  
RF energy. Your physician may be able to assist you  
in obtaining this information. Switch your phone off  
in health care facilities when any regulations posted  
in these areas instruct you to do so. Hospitals or  
health care facilities may be using equipment that  
could be sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or  
inadequately shielded electronic systems in motor  
vehicles. Check with the manufacturer or its  
representative regarding your vehicle.  
You should also consult the manufacturer of any  
equipment that has been added to your vehicle.  
Posted facilities  
Switch off your phone in any facility where posted  
notices require you to do so.  
149  
Health and safety information  
Potentially explosive environments  
Switch your phone off when in any area with a  
potentially explosive atmosphere and obey all signs  
and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even  
death.  
Users are advised to switch the phone off while at a  
refuelling point (service station). Users are  
reminded of the need to observe restrictions on the  
use of radio equipment in fuel depots (fuel storage  
and distribution areas), chemical plants or where  
blasting operations are in progress.  
Areas with a potentially explosive atmosphere are  
often but not always clearly marked. They include  
below deck on boats, chemical transfer or storage  
facilities, vehicles using liquefied petroleum gas,  
such as propane or butane, areas where the air  
contains chemicals or particles, such as grain, dust  
or metal powders, and any other area where you  
would normally be advised to turn off your vehicle  
engine.  
150  
Health and safety information  
Emergency calls  
This phone, like any wireless phone, operates using  
radio signals, wireless and landline networks as well  
as user-programmed functions, which cannot  
guarantee connection in all conditions. Therefore,  
you should never rely solely on any wireless phone  
for essential communications (medical  
emergencies, for example).  
Remember, to make or receive any calls the phone  
must be switched on and in a service area with  
adequate signal strength. Emergency calls may not  
be possible on all wireless phone networks or when  
certain network services and/or phone features are  
in use. Check with local service providers.  
To make an emergency call, proceed as follows.  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present  
location (for example, 112 or any other official  
emergency number). Emergency numbers vary  
by location.  
3. Press the  
key.  
If certain features are in use (call barring, for  
example), you may first need to deactivate those  
features before you can make an emergency call.  
Consult this document and your local cellular  
service provider.  
When making an emergency call, remember to give  
all the necessary information as accurately as  
possible. Remember that your phone may be the  
only means of communication at the scene of an  
accident; do not end the call until given permission  
to do so.  
151  
Health and safety information  
Other important safety information  
• Only qualified personnel should service the phone  
or install the phone in a vehicle. Faulty  
installation or service may be dangerous and may  
invalidate any warranty applicable to the device.  
• Check regularly that all wireless phone equipment  
in your vehicle is mounted and operating  
properly.  
• Do not store or carry flammable liquids, gases, or  
explosive materials in the same compartment as  
the phone, its parts, or accessories.  
• For vehicles equipped with an air bag, remember  
that an air bag inflates with great force. Do not  
place objects, including both installed or portable  
wireless equipment in the area over the air bag or  
in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag  
inflates, serious injury could result.  
• Switch your phone off before boarding an aircraft.  
The use of wireless phones in aircraft may be  
dangerous to the operation of the aircraft, and is  
illegal.  
• Failure to observe these instructions may lead to  
the suspension or denial of telephone services to  
the offender, or legal action, or both.  
152  
Health and safety information  
Care and maintenance  
Your phone is a product of superior design and  
craftsmanship and should be treated with care. The  
suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for  
many years.  
• Keep the phone and all its parts and accessories  
out of the reach of small children.  
• Keep the phone dry. Precipitation, humidity, and  
liquids contain minerals that corrode electronic  
circuits.  
• Do not use the phone with a wet hand. Doing so  
may cause an electric shock to you or damage to  
the phone.  
• Do not use or store the phone in dusty, dirty  
areas, as its moving parts may be damaged.  
• Do not store the phone in hot areas. High  
temperatures can shorten the life of electronic  
devices, damage batteries, and warp or melt  
certain plastics.  
• Do not store the phone in cold areas. When the  
phone warms up to its normal operating  
temperature, moisture can form inside the  
phone, which may damage the phone’s electronic  
circuit boards.  
• Do not drop, knock, or shake the phone. Rough  
handling can break internal circuit boards.  
• Do not use harsh chemicals, cleaning solvents, or  
strong detergents to clean the phone. Wipe it  
with a soft cloth slightly dampened in a mild  
soap-and-water solution.  
153  
Health and safety information  
• Do not paint the phone. Paint can clog the  
device’s moving parts and prevent proper  
operation.  
• Do not put the phone in or on heating devices,  
such as a microwave oven, a stove, or a radiator.  
The phone may explode when overheated.  
• Use only the supplied or an approved  
replacement antenna. Unauthorised antennas or  
modified accessories may damage the phone and  
violate regulations governing radio devices.  
• If the phone, battery, charger, or any accessory is  
not working properly, take it to your nearest  
qualified service facility. The personnel there will  
assist you, and if necessary, arrange for service.  
154  
Glossary  
To help you understand the main technical terms  
and abbreviations used in this booklet and take full  
advantage of the features of your mobile phone,  
here are a few definitions:  
Call barring  
Ability to restrict outgoing and incoming calls.  
Call diverting  
Ability to reroute calls to another number.  
Call holding  
Ability to put one call on standby while answering or  
making another call; you can then switch between  
the two calls, as required.  
Call waiting  
Informs you that you have an incoming call when  
you are engaged on another call.  
Caller line identification services (Caller ID)  
Services allowing subscribers to view or block the  
telephone numbers of callers.  
EMS (Enhanced message service)  
An adaptation of the Short Message Service (SMS)  
that allows you to send and receive ring tones and  
your service provider’s logo, as well as  
combinations of simple media to and from EMS-  
compliant handsets.  
155  
Glossary  
Because EMS is based on SMS, it can use SMS  
centres the same way that SMS does. EMS works on  
all Global System for Mobile communications (GSM)  
networks. EMS senders can use text, melodies,  
pictures, sounds, and animated images to enhance  
the expressive power of messages that are  
otherwise limited by the display constraints of  
mobile devices.  
GPRS (General packet radio service)  
New non-voice, value-added service that allows  
information to be sent and received across a mobile  
telephone network. GPRS provides continuous  
connection to the Internet for mobile phone and  
computer users. It is based on the Global System  
for Mobile Communication (GSM) circuit-switched  
cellular phone connections and the Short Message  
Service (SMS).  
GSM (Global system for mobile  
communication)  
International standard for cellular communication,  
guaranteeing compatibility between the various  
network operators. GSM covers most European  
countries and many other parts of the world.  
156  
Glossary  
Java  
Programming language generating applications that  
can run on all hardware platforms, whether small,  
medium, or large, without modification. It has been  
promoted for and geared heavily to the Web, both  
for public Web sites and Intranets. When a Java  
program runs from a Web page, it is called a Java  
applet. When it is run on a mobile phone or pager, it  
is called a MIDlet.  
MMS (Multimedia message service)  
A message service for the mobile environment,  
standardized by the WAP Forum and the 3rd  
Generation Partnership Program (3GPP). For phone  
users, MMS is similar to Short Message Service  
(SMS)--it provides automatic, immediate delivery of  
user-created content from phone to phone. The  
message addressing used is primarily phone  
numbers, thus the traffic goes from phone to  
phone. MMS also provides support for e-mail  
addressing, so that messages can be sent by  
e-mail. In addition to the text content of SMS, MMS  
messages can contain still images, voice or audio  
clips, and also video clips and presentation  
information.  
Multi-party calling  
Ability to establish a conference call involving up to  
five additional parties.  
Phone password  
Security code used to unlock the phone when you  
have selected the option to lock it automatically  
each time it switches on.  
157  
Glossary  
PIN (Personal identification number)  
Security code that protects the phone against  
unauthorised use. The PIN is supplied by the  
service provider with the SIM card. It may be a four  
to eight-digit number and can be changed, as  
required.  
PUK (PIN unblocking key)  
Security code used to unlock the phone when an  
incorrect PIN has been entered three times in  
succession. The eight-digit number is supplied by  
the service provider with the SIM card.  
Roaming  
Use of your phone when you are outside your home  
network service area (when travelling for example).  
SDN (Service dialling numbers)  
Telephone numbers supplied by your network  
provider and giving access to special services, such  
as voice mail, directory inquiries, customer support,  
and emergency services.  
SIM (Subscriber identification module)  
Card containing a chip with all the information  
required to operate the phone (network and  
memory information, as well as the subscriber’s  
personal data). The SIM card fits into a small slot in  
the back of the phone and is protected by the  
battery.  
158  
Glossary  
SMS (Short message service)  
Network service for sending and receiving  
messages to and from another subscriber without  
having to speak to the correspondent. The message  
created or received can be displayed, received,  
edited, or sent.  
Soft keys  
Two keys (  
of which:  
and  
) on the phone, the purpose  
• varies according to the function that you are  
currently using.  
• is indicated on the bottom line of the display just  
above the corresponding key.  
Voice mail  
Computerised answering service that automatically  
answers your calls when you are not available,  
plays a greeting (optionally in your own voice), and  
records a message.  
159  
Index  
Caller ID • 122  
Calls  
A
Access codes • 140  
Accessories •  
Alarm • 105  
Alert type • 92  
Alphabet mode, text input •  
42  
answer • 28  
bar • 118  
divert • 116  
end • 26  
hold • 31  
making • 25  
redial • 26  
9
Anykey answer • 103  
Auto redial • 103  
wait • 35  
Card, SIM  
,
120  
inserting • 17  
CB(CellBroadcast) messages  
B
Background image • 96  
Backlight time, set • 97  
Backlight • 16  
Backlight, auto • 98  
Barring, calls • 118  
Battery  
73  
Characters, enter • 38  
Closed User Group (CUG) •  
122  
Conference call • 36  
Connect tone • 95  
Contrast, display • 97  
Cost, calls • 90  
charging • 19  
low battery indicator •  
20  
Currency exchange • 115  
remove • 17  
removing • 19  
D
Battery precautions • 145  
Broadcast messages • 73  
Browser, WAP • 125  
Date, set • 109  
Delivery reports, message •  
71  
Dialled calls • 88  
Display  
icons • 14  
main • 13  
Divert, calls • 116  
DTMF tones, send • 34  
C
Calculator • 110  
Calendar memos  
copy • 108  
delete• 108  
view • 108  
write • 107  
E
Call back, message • 65  
Call costs • 90  
Call numbers  
dialled • 88  
Earpiece volume • 27  
Emergency calls • 151  
EMS (Enhanced Message  
Service) • 64  
missed • 28 87  
,
received • 88  
Call records • 87  
Call time • 89  
Caller groups  
edit • 59  
Error tone • 95  
F
FDN (Fixed Dial Number)  
search • 58  
mode • 102  
160  
Index  
Forward, multimedia  
message • 77  
Functions, select • 22  
M
Memory status  
downloaded items • 135  
multimedia messages •  
84  
G
text messages • 72  
Games • 132  
Greeting message • 98  
Menus  
access • 45  
list • 47  
Message tone • 93  
Messages  
H
Hold, call • 31  
cell broadcast • 73  
greeting • 98  
multimedia • 75  
text • 64  
I
Icons • 14  
voice • 72  
Inbox, messages  
multimedia • 75  
text • 64  
Infrared, connect • 96  
International calls • 25  
Internet • 125  
MIDlets, launch • 132  
Minute minder • 95  
Missed calls • 28  
Morning call • 105  
Multimedia messages  
,
87  
delete • 77  
,
78  
edit • 79  
J
read • 75  
,
78  
set • 80  
Java service • 132  
Multimedia messages (MMS)  
75  
K
Multi-party calls • 36  
Mute  
Key volume • 27  
Keypad tones  
select • 92  
send • 33  
all sounds • 30  
key tones • 33  
microphone • 32  
Keys  
location • 10  
shortcut • 104  
N
Names  
enter • 38  
L
search/dial • 57  
Network services • 116  
Numbers, phone  
search/dial • 57  
store • 52  
Language, select • 99  
Last number, redial • 26  
LCD  
icons • 14  
main • 13  
Lock  
O
phone• 100  
SIM card • 101  
Options, select • 22  
Organiser • 105  
Outbox, messages  
161  
Index  
multimedia • 78  
text • 65  
Own number • 98  
S
Safety  
information • 144  
precautions •  
Scheduler • 106  
7
P
Search, phonebook • 57  
Security, calls • 99  
Sent messages  
multimedia • 78  
text • 65  
Shortcut, menu • 104  
Silent mode • 30  
SIM card  
Password  
call bar • 119  
phone • 101  
Phone  
,
143  
,
140  
layout • 10  
lock • 100  
password • 140  
switching on/off • 21  
lock • 101  
SMS (Short Message Service)  
inbox • 64  
Phonebook  
copy • 56  
delete • 55  
edit • 55  
,
61  
outbox • 65  
Soft keys, use • 21  
Sounds, set • 91  
Speed-dial • 60  
Switch on/off  
,
22  
options • 55  
search/dial • 57  
speed-dial • 60  
store • 52  
microphone • 32  
PIN  
Switching on/off  
change • 100  
phone • 21  
description • 141  
Symbol, text input • 44  
PIN2  
change • 102  
description • 142  
Privacy • 101  
PUK • 141  
T
T9 mode, text input • 40  
Tasks, to do list  
create • 110  
PUK2 • 142  
edit • 111  
Templates  
multimedia • 83  
text • 69  
Text input mode • 39  
Text message  
R
Received calls • 88  
Received messages  
multimedia • 75  
text • 64  
delete • 64  
,
66, 71  
Redial  
read • 64 65  
,
automatically • 103  
manually • 26  
Reset • 104  
send • 66  
set • 70  
Text, enter • 38  
Time format • 109  
Time, set • 109  
To do list • 110  
Tone  
Ring tone • 91  
Ring type • 92  
Ring volume • 91  
Roaming • 121  
connect • 95  
162  
Index  
error • 95  
keypad • 92  
message • 93  
ring • 91  
Travel adapter • 19  
U
User group • 122  
V
Vibration • 92  
Voice mail • 72  
Voice memo  
delete • 115  
play • 114  
record • 113  
Voicemail server • 72  
Volume, adjust  
earpiece • 27  
keypad tone • 27  
ring • 91  
W
Waiting call • 120  
Wallpaper • 96  
WAP browser  
access • 125  
cache, clear • 131  
favorites • 129  
World time • 109  
163  
164  
165  
166  
Declaration of Conformity (R&TTE)  
For the following product  
:
GSM900/GSM1800 Dualband Digital  
Portable Cellular Telephone  
(Product description)  
SGH-C200N  
(Model name)  
Manufactured at  
:
-
Samsung Electronics Co., Ltd, 94-1, Imsoo-Dong, Gumi City, Kyung-Buk, Korea,  
730-350  
(factory name, address)  
to which this declaration relates, is in conformity with the following standards and/or other normative  
documents.  
Safety  
EMC  
:
:
EN 60950-1:2001  
EN 301 489-01 v1.4.1 (2002-08)  
EN 301 489-07 v1.2.1 (2002-08)  
SAR  
:
:
EN 50360:2001  
EN 50361:2001  
Network  
EN 301 511 v7.0.1 (2000-12)  
We hereby declare that [all essential radio test suites have been carried out and that] the above named  
product is in conformity to all the essential requirements of Directive 1999/5/EC.  
¥‡  
The conformity assessment procedure referred to in Article 10 and detailed in Annex[  
]
of Directive  
1999/5/EC has been followed with the involvement of the following Notified Body(ies):  
BABT, Claremont House, 34 Molesey Road,  
Walton-on-Thames, KT12 4RQ, UK  
Identification mark: 168  
The technical documentation kept at  
:
Samsung Electronics Euro QA Lab.  
which will be made available upon request.  
(Representative in the EU)  
Samsung Electronics Euro QA Lab.  
Blackbushe Business Park,Saxony Way,  
GU46 6GG, UK  
Yateley, Hampshire,  
2004.08.09  
Yong-Sang Park  
/
S. Manager  
(place and date of issue)  
(name and signature of authorized person)  
¡
It is not the address of Samsung Service Centre. For the address or the phone number of Samsung  
Service Centre, see the warranty card or contact the retailer where you purchased your phone.  

Sunbeam Programmable Coffemaker 6396 User Manual
Sonic Alert CAR Air Operator 705 User Manual
Sirius Satellite Radio TWILIGHT ISP2000 User Manual
Seagate Barracuda ST3160023A User Manual
Sagem MY 304X User Manual
Rosewill RC503 User Manual
Philips CD 634 User Manual
Philips AX5125 User Manual
Palm 600 User Manual
Oregon Scientific RM622PA User Manual