Samsung SGH C100 User Manual

* Some of the contents in this manual may differ from your phone,

depending on the software installed or your service provider.

DUAL BAND

GPRS TELEPHONE

SGH-C100

ELECTRONICS

Printed in Korea

Code No.: GH68-03883A

English. 07/2003. Rev. 1.0

World Wide Web

http://www.samsungmobile.com

Contents

Important Safety Precautions ................

Unpacking..............................................

Your Phone ............................................

Phone Layout............................................

Display ....................................................

Service Light ............................................

Getting Started ......................................

Installing the SIM Card ..............................

Charging a Battery ....................................

Switching the Phone On/Off........................

Locking or Unlocking the Keypad.................

Call Functions ........................................

Making a Call............................................

Adjusting the Volume ................................

Answering a Call .......................................

Viewing Missed Calls..................................

Switching Quickly to the Silent Mode............

Selecting Functions and Options ............

Phonebook.............................................

Storing a Number with a Name ...................

Using Phonebook Entry Options...................

Searching for and Dialling a Number

in the Phonebook ......................................

Editing a Caller Group................................

Speed-Dialling ..........................................

Deleting All Phonebook Entries....................

Checking the Memory Status ......................

Contents

Dialled Calls (Menu 2.3)..............................

Delete All (Menu 2.4) .................................

Call Time (Menu 2.5)..................................

Call Cost (Menu 2.6) ..................................

Entering Text .........................................

Changing the Text Input Mode ....................

Using the T9 Mode ....................................

Using the Upper/Lower-Case

Sound Settings.......................................

Character Modes.......................................

Using the Symbol Mode..............................

Using the Number Mode.............................

Ring Tone (Menu 3.1).................................

Ring Volume (Menu 3.2) .............................

Alert Type (Menu 3.3) ................................

Keypad Tone (Menu 3.4).............................

Message Tone (Menu 3.5) ...........................

Power On/Off (Menu 3.6) ............................

Extra Tones (Menu 3.7) ..............................

Options During a Call .............................

Putting a Call on Hold ................................

Switching the Microphone Off (Mute) ...........

Muting/Sending Key Tones .........................

Sending DTMF Tones .................................

Searching for a Number in the Phonebook ....

Using the SMS Service...............................

Answering a Second Call ............................

Making a Multiparty Call.............................

Phone Settings.......................................

Infrared Activate (Menu 4.1) .......................

My Settings (Menu 4.2) ..............................

Greeting Message (Menu 4.3)......................

Own Number (Menu 4.4).............................

Language (Menu 4.5) .................................

Security (Menu 4.6) ...................................

Display Settings (Menu 4.7)........................

Extra Settings (Menu 4.8) ...........................

Short Cut (Menu 4.9) .................................

Reset Settings (Menu 4.10) .........................

Using the Menus.....................................

Accessing Menu Functions by Scrolling.........

Accessing Menu Functions by Using Shortcuts

List of Menu Functions ...............................

Messages ...............................................

Inbox (Menu 1.1).......................................

Outbox (Menu 1.2).....................................

Write New (Menu 1.3) ................................

Templates (Menu 1.4) ................................

Settings (Menu 1.5) ...................................

Delete All (Menu 1.6)..................................

My Objects (Menu 1.7) ...............................

Memory Status (Menu 1.8)..........................

Voice Mail (Menu 1.9).................................

Broadcast (Menu 1.10) ...............................

Organiser...............................................

Calendar (Menu 5.1) ..................................

To Do List (Menu 5.2).................................

Time & Date (Menu 5.3) .............................

Alarm (Menu 5.4) ...................................... 100

Calculator (Menu 5.5)................................. 101

Currency Exchange (Menu 5.6).................... 102

Network Services................................... 103

Call Diverting (Menu 6.1)............................ 103

Call Barring (Menu 6.2) .............................. 105

Call Waiting (Menu 6.3) .............................. 107

Call Records ...........................................

Missed Calls (Menu 2.1)..............................

Received Calls (Menu 2.2)...........................

Contents

Network Selection (Menu 6.4)...................... 108

Caller ID (Menu 6.5) .................................. 109

Closed User Group (CUG) (Menu 6.6) ........... 109

Fun Box.................................................. 111

Games (Menu 7.1) ..................................... 111

WAP Browser (Menu 7.2) ............................ 112

Downloads (Menu 7.3)................................ 119

Solving Problems ................................... 121

Access Codes ......................................... 124

Phone Password........................................ 124

PIN ......................................................... 125

PUK......................................................... 125

PIN2........................................................ 126

PUK2....................................................... 126

Barring Password ...................................... 127

Health and Safety Information............... 128

Exposure to Radio-Frequency

Energy (SAR Information) .......................... 128

Precautions When Using Batteries................ 130

Road Safety ............................................. 132

Operating Environment.............................. 134

Electronic Devices ..................................... 134

Potentially Explosive Atmospheres............... 136

Emergency Calls ....................................... 137

Other Important Safety Information ............ 138

Care and Maintenance ............................... 139

Glossary................................................. 141

Index ..................................................... 145

Quick Reference Card............................. 151

Important Safety

Precautions

Read these guidelines before using your mobile

phone. Failure to comply with them may be

dangerous or illegal. For more detailed safety

information, see “Health and Safety Information”

on page 128.

Road Safety at All Times

Do not use a hand-held phone while driving; park

the vehicle first.

Switching Off When Refuelling

Do not use the phone at a refuelling point (service

station) or near fuels or chemicals.

Switching Off in Aircraft

Mobile phones can cause interference. Using them

in aircraft is both illegal and dangerous.

Switching Off in Hospitals

Switch off your phone near medical equipment.

Follow any rules or regulations in force.

Interference

All mobile phones may be subject to interference,

which may affect their performance.

Special Regulations

Meet any special regulations in force in any area

and always switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger (in a hospital for example).

Important Safety Precautions

Radio Frequency Exposure

Unpacking

Your package contains the following items.

The design of this phone complies with European

Union (EU) requirements relating to radio frequency

(RF) exposure. To maintain compliance with these

requirements, use only Samsung-supplied or

approved accessories. Use of non-approved

accessories may violate the requirements.

Travel Adapter

User’s Manual

Handset

Battery

Sensible Use

Use only in the normal position (held to the ear).

Water Resistance

Your phone is not water-resistant. Keep it dry.

Accessories and Batteries

Use only Samsung-approved accessories and

batteries.

Hand Strap

Qualified Service

The items supplied with your phone may be

different, depending on your country.

Only qualified service personnel may install or

repair your phone.

In addition, you can obtain the following

accessories for your phone from your local

Samsung dealer:

• Ear-microphone

• Simple hands-free kit

• Standard batteries

• Cigarette lighter adapter

• Car holder

• Data cable

• Battery charger

Your Phone

Phone Layout

Key

Description

In the menu facility, scroll through the

menu options and phonebook memory.

The following illustration shows the main elements

of your phone.

In idle mode, allow you to access your

favourite menu options directly (for

more information on shortcuts, see

page 92).

Ear-

microphone

jack

Service light

Earpiece

In the menu facility, return to the

previous menu level and select the

current menu respectively.

Volume/menu

browse keys

Display

When entering text, move the cursor

left and right respectively.

In idle mode, allow you to access your

favourite menu options directly (for

more information on shortcuts, see

page 92).

Navigation keys

Soft key (left)

Soft key (right)

Power on/off /

menu exit key

Dial/menu

Perform the functions indicated by the

text above them (on the bottom line of

the display).

confirmation key

Cancel/WAP

Browser key

(soft keys)

IrDA port

Alphanumeric

keys

When entering text, deletes characters

from the display.

Special

function keys

Microphone

In the menu facility, returns to the

previous menu level.

In idle mode, launches the WAP

(Wireless Application Protocol) Browser

directly.

Your Phone

Key

Your Phone

Display

Description (continued)

Makes or answers a call.

Display Layout

When held down in idle mode, recalls

the last number dialled or received.

The display comprises three areas.

In the menu facility, selects a menu

option or stores information that you

have entered (such as a name) in the

phone or SIM memory.

Icons

Text and

graphic area

Ends a call.

When held down, switches the phone

on and off.

Soft keys

In the menu facility, cancels your input

Name

and returns to the idle mode.

When held down in idle mode,

accesses your voice mail.

Area

Description

First line

Displays various icons (see

page 14).

Enter numbers, letters and some

special characters.

Middle lines

Display messages, instructions

and any information that you

enter (number to be dialled, for

example).

Enter special characters.

Perform various functions.

Last line

Shows the functions currently

assigned to the two soft keys.

(on the side of the phone)

During a call, adjust the earpiece

volume.

In idle mode, adjust the key volume.

In the menu facility, scroll through the

menu options and phonebook memory.

Your Phone

Icons

Icon Description (continued)

Icon Description

Appears when the mute mode is active.

Shows the received signal strength. The

greater the number of bars, the better the

signal strength.

Appears when you are out of your home

area and have registered with a different

network; for example, when travelling in

other countries.

Appears when a call is in progress.

Appears when the keys are locked.

Appears when you are connected to the

GPRS network.

Backlight

Appears when the silent mode is active or

you set the Alert Type menu option

(Menu 3.3), so that the phone vibrates

when you receive a call; for further

details, see page 28 and page 79.

The display and keypad are illuminated by a

backlight. When you press any key, the backlight

turns on and remains on for a given period of time,

depending on the Back Light menu option

(Menu 4.7.2). Then it dims and finally switches to

the digital clock, conserving your battery power.

Appears when a new text message has

been received.

To specify the length of time for which the

backlight is active, set the Back Light menu

option (Menu 4.7.2); see page 90 for further

details.

Appears when a new voice mail message

has been received.

Appears when you are entering text to

indicate the current text input mode.

Service Light

Appears when you set the alarm.

The service light is top left on the phone. It flashes

when services are available on the phone.

Shows the level of your battery. The more

bars you see, the more power you have

left.

To activate or deactivate use of the service light, set

the Service Light menu option (Menu 4.7.3); see

page 90 for further details.

Appears when the IrDA port is active. For

details, see page 83.

Getting Started

3. Slide the SIM card into the SIM card holder so

that the holder locks the card in position.

Make sure that the cut corner is top right and the

gold contacts of the card face into the phone.

Installing the SIM Card

When you subscribe to a cellular network, you are

provided with a plug-in SIM card loaded with your

subscription details, such as your PIN, any optional

services available and so on.

Important! The plug-in SIM card and its contacts

can be easily damaged by scratches or

bending, so be careful when handling,

inserting or removing the card.

Keep all SIM cards out of the reach of

small children.

Note: When you need to remove the SIM card, slide

it, as shown below, and take it out of the

holder.

1. If necessary, switch off the phone by holding

down the

displayed.

key until the power-off image is

2. Remove the battery. To do so:

➀➀➀➀Pull the battery catch on the back of the

phone and hold it in that position.

➀ ➀Lift the battery away, as shown.

4. Place the battery so that the tabs on the end

align with the slot at the bottom of the phone.

Getting Started

5. Push the battery down until it clicks into place.

Make sure that the battery is properly installed

before switching on the phone.

2. Connect the adapter to a standard AC wall outlet.

3. When charging is finished, disconnect the adapter

from the power outlet and from the phone by

pressing the gray tabs on both sides of the

connector and pulling the connector out.

Charging a Battery

Your phone is powered by a rechargeable Li-ion

battery. A travel adapter is provided with your

phone. Use only approved batteries and chargers.

Ask your local Samsung dealer for further details.

Note: Do not remove the battery from the phone while

it is charging without first unplugging the

adapter. If you do so, the phone may be

damaged.

The phone can be used while the battery is

charging, but this will cause the battery to charge

more slowly.

Low Battery Indicator

When the battery is weak and only a few minutes of

talk time remain, you will hear a warning tone and a

message will be repeated at regular intervals on the

display.

Note: You must fully charge the battery before using

your phone for the first time. A discharged

battery is fully recharged in approximately

200 minutes.

When the battery becomes too weak for the phone to

operate, it switches off automatically.

1. With the battery in position on the phone,

connect the lead from the travel adapter to the

bottom of the phone.

Getting Started

Switching the Phone On/Off

Locking or Unlocking the Keypad

You can lock the keypad to avoid pressing keys by

mistake.

1. Hold down the

switches on.

key until the phone

Press and hold the

icon and "Keypad Locked" appear on the display.

key in idle mode until the

2. If the phone asks for a password, key in the

password and press the OK soft key. The phone

password is factory set to 00000000. For further

details, see page 124.

You can answer incoming calls using any keys, even

if you lock the keypad. When you end the call, your

phone returns to the key lock mode after the period

of time specified in the Auto Key Lock menu

option (Menu 4.2.3).

3. If the phone asks for a PIN, key in the PIN and

press the OK soft key. For further details, see

page 125.

You can dial emergency calls even if you lock the

keypad. Enter an emergency number. When the

confirmation message appears, press the Yes soft

The phone searches for your network and when

it finds it, the idle screen, illustrated below,

appears. Now, you can make or receive a call.

key or the

key. When you end the call, your

phone returns to the key lock mode after the period

of time specified in the Auto Key Lock menu

option (Menu 4.2.3).

Service Provider

05:17

Sat 02 Oct

To exit the key lock mode, press the Unlock soft

key and then press the

Unlocked" appears and the

displayed.

key again. "Keypad

icon is no longer

Name

You can also set the phone to automatically lock

the keypad in the Auto Key Lock menu option

(Menu 4.2.3). For further details, see page 85.

Note: The display language is factory set to

English. To change the language, use the

Language menu option (Menu 4.5); for

further details, refer to page 86.

4. When you wish to switch the phone off, hold

down the

displayed.

key until the power-off image is

Note: If you locked the keypad, you must unlock

it before switching the phone off by

pressing the Unlock soft key and

the

key.

Call Functions

Ending a Call

When you have finished your call, briefly press

Making a Call

the key.

When the idle screen is displayed, key in the area

code and phone number, and press the key.

Redialling the Last Number

The phone stores the numbers you dialled, received

or missed if the callers are identified; see “Call

Records” on page 74 for further details.

Note: If you have checked the Auto Redial option in

the Extra Settings menu (Menu 4.8), the

number is redialled automatically up to ten

times when the person does not answer the call

or is already on the phone; see page 91 for

further details.

To recall any of these numbers, proceed as follows.

1. If you have typed any characters on the display,

clear the display by holding down the

for more than one second.

key

Making an International Call

2. Press the

key to display a list of the last

1. Press and hold down the

key.

numbers in the order in which the calls were

made.

The + character appears.

2. Key in the country code, area code and phone

3. Use the

and

keys to scroll through the

number and press the

key.

numbers until the required number is high-

lighted.

Correcting the Number

To...

Then...

To clear...

Then...

Dial the number Press the

highlighted

key.

The last digit

displayed

Press the

key.

Edit the number Press the Options soft key,

highlighted

select the Edit option and

change the number as

required.

Any other digit

in the number

Press the or key until the

cursor is immediately to the

right of the digit to be cleared.

Press the

insert a missing digit simply by

pressing the appropriate key.

key. You can also

Press the Options soft key

and select Delete.

Delete the

number

highlighted

The whole

display

Hold down the

than one second.

key for more

Press the Options soft key

and select Delete All. For

details, see page 75.

Delete all

numbers in the

list

Call Functions

Making a Call from the Phonebook

Answering a Call

You can store frequently-dialled phone numbers

with a name in the SIM card or the phone memory,

using the phonebook. You then simply select the

required name to recall the associated number. For

further details on the Phonebook features, refer to

page 31.

When somebody calls you, the phone rings and

shows the incoming call animation.

If the caller can be identified, the caller’s phone

number or name, if stored in your phonebook, is

displayed.

Note: While the phone is ringing, you can mute the

ring tone. Hold down one of the volume keys on

the left side of the phone.

Adjusting the Volume

During a call, if you want to adjust the earpiece

volume, use the volume keys on the left side of the

phone.

1. Press the

key or the Accept soft key to

answer the incoming call.

If the Anykey Answer option in the Extra

Settings menu (Menu 4.8) is checked, you can

press any key to answer a call except for the

key and the Reject soft key (see page 91).

Press the

key to increase and the

key to

decrease the volume.

2. To reject an incoming call, press the Reject soft

key.

3. End the call by pressing the

key.

Note: You can answer a call while using the phonebook

or menu features.

In idle mode, you can adjust the key volume using

the same keys.

Call Functions

Editing a Missed Call Number

Viewing Missed Calls

Note: If the number corresponding to the missed call

is not available, the Edit option is not

displayed.

If you are unable to answer a call for any reason,

you can find out who was calling you, provided that

this service is available. In this way, you can call the

person back, if necessary.

1. Press the Options soft key.

2. Press the

option.

key to highlight the Edit

The number of missed calls is displayed on the idle

screen immediately after a call was missed.

To view the missed call immediately, proceed as

follows.

3. Press the Select soft key.

4. Change the number as required.

1. Press the View soft key.

The number corresponding to the most recent

missed call is displayed, if available.

To...

Then press the...

Call the number

key.

To...

Then press the...

Store the number

Save soft key and enter

the name and location

required (for further

Scroll through the

missed calls

key.

details, refer to page 31).

Call the number

displayed

key.

Deleting a Missed Call

Edit or delete a missed

call number

Select soft key (see

next page).

1. Press the Options soft key.

2. If necessary, press the

key to highlight

the Delete option.

3. Press the Select soft key.

You can press the

key at any time to exit the

Missed Call feature.

Note: You can access the Missed Call feature at any

time by selecting the Missed Calls menu

option (Menu 2.1); for further details, see

page 74.

Call Functions

Selecting Functions

and Options

Your phone offers a set of functions that allow you

to customise your phone. These functions are

arranged in menus and sub-menus, accessed via

Switching Quickly to the Silent Mode

The silent mode is convenient when discretion is

required and you wish to stop the phone from

making any noise, in a theatre for example.

the two soft keys marked

and

. Each menu

or sub-menu allows you to view and alter the

settings of a particular function.

In idle mode, to switch your phone quickly to the

silent mode, simply press and hold down the

key until the “Silent Mode” message and vibration

The roles of the soft keys vary according to the

current context; the label on the bottom line of the

display just above each key indicates its current

role.

icon (

) are displayed.

In the silent mode, your phone changes the sound

settings as follows.

Example:

Option

New Setting

Vibration

Off

Alert Type (Menu 3.3)

Keypad Tone (Menu 3.4)

SMS Tone (Menu 3.5.1)

Light Only

Service Provider

05:17

Power On/Off Tone

(Menu 3.6)

Off

Sat 02 Oct

Extra Tones (Menu 3.7)

9_N18_ame

To exit the silent mode and reactivate the previous

sound settings, press and hold down the key

again until “Exit Silent Mode” appears. The vibration

icon ( ) is no longer displayed.

Press the left soft

key to access the

menu facility.

Press the right soft

key to access the

Phonebook feature.

Selecting Functions and Options

Phonebook

You can store phone numbers and their corres-

ponding names in the memory of your SIM card. In

addition, you can store up to 500 numbers in the

phone memory. The SIM card and phone memories,

although physically separate, are used as if they

were a single entity, called the phonebook.

To view the various functions/options available and

select the one required, proceed as follows.

1. Press the appropriate soft key.

To...

Then press the...

Select the:

• Function displayed

Select soft key or

the key.

Storing a Number with a Name

There are two ways to store a number:

• Option highlighted

• Using the Save soft key in idle mode

View the next function

or highlight the next

option in a list

key or

key on

• Using the New Entry option in the phonebook

the left side of the

phone.

Storing a Number in Idle Mode

Move back to the

previous function or

option in a list

key or

the left side of the

phone.

key on

As soon as you start to enter a number, Save

appears above the left soft key to allow you to store

the number in the phonebook.

Move back up one level

in the structure

key,

key.

soft key or

1. Key in the number to be stored.

Exit the structure

without changing the

settings

key.

Note: If you make a mistake while entering a

number, correct it using the

further details, refer to page 22.

key. For

In some functions, you may be asked for a

password or PIN. Enter the required code and press

the OK soft key.

2. When you are sure that it is correct, press the

Save soft key.

3. Select an icon to identify the category of the

number to be stored. Three categories are

available:

Note: When you access a list of options, your

phone highlights the current option. If,

however, there are only two options, such as

On/Off or Enable/Disable, your phone

highlights the option that is not currently

active, so that you can select it directly.

Mobile phone number

Office number

Home number

To select the category, press the or key,

followed by the Select soft key.

Phonebook

4. Choose a memory, either SIM or Phone, by

Storing a Number Using the Phonebook

pressing the

soft key.

key and press the Select

1. When the idle screen is displayed, press the

Name soft key.

Note: If you change phones, any numbers stored

in your SIM card memory will automatically

be available with the new phone, whereas

any numbers stored in the phone memory

must be stored again.

2. Scroll to New Entry by pressing the

key and press the Select soft key.

3. Select an icon to identify the category of the

number to be stored.

Note: The E-mail icon (

) is available in this

5. Enter a name and press the OK soft key.

step. It allows you to save an E-mail

address instead of a phone number.

The maximum length of a name depends on

your SIM card. For information on how to enter

characters, see page 42.

4. Choose a memory, either SIM or Phone, by

pressing the

key and press the

The phone now displays the first free location in

the selected memory. If that memory is full, the

first free location in the other memory is

displayed.

Select soft key.

5. Enter a name and press the OK soft key.

The maximum length of a name depends on

your SIM card. For information on how to enter

characters, see page 42.

6. If you do not want to save the number and

name in the suggested location, press the

key to clear the location number and enter your

preferred location by pressing the number keys.

6. Enter the number or E-mail address and press

the Save soft key.

7. If you do not want to save the number and

name in the suggested location, press the

key to clear the location number and enter your

preferred location by pressing the number keys.

7. Press the OK soft key to store the name and

number.

8. Press the OK soft key to store the name and

After storing, the phone displays the phonebook

entry or name just created.

number.

After storing, the phone displays the phonebook

entry or name just created.

To...

Then press the...

Options soft key.

key.

Use the entry options

Return to the idle screen

To...

Then press the...

Options soft key.

key.

Use the entry options

Return to the idle

screen

Phonebook

Caller Group: allows you to assign the entry to a

caller group so that the phone alerts you in a

particular way when the corresponding person calls

you. Select one of the ten groups available.

Using Phonebook Entry Options

While accessing any phonebook entry, press the

Options soft key to use the options for the entry.

To remove an entry from a group, select the No

To...

Then press the...

Group option.

For more information on how to change caller group

properties, see page 37.

Select the

highlighted option

Select soft key or the key.

Add Entry: allows you to add a new number in a

different category (mobile, office, home or E-mail) to

the currently selected name. A phonebook entry can

contain a name and up to four numbers, one in each

category.

Highlight a different

option

key until the

required option is highlighted.

The following options are available.

Paste: allows you to paste the selected number

into the normal dialling mode. Use this option to

dial a number similar to one in the phonebook, a

different extension in the same office, for example.

Searching for and Dialling a Number

in the Phonebook

Use the

refer to page 22 for further details. When you are

ready to dial, press the key.

key to change the number as required;

After storing numbers in the phonebook, you can

search for them in two ways:

Edit: allows you to edit the phonebook entry.

• By name

• By caller group

Select One Entry to change one of the numbers

associated with the selected name. If you then

change the name, the number is saved separately.

Select All Entry to change the name assigned to

the entry.

Searching for a Number by Name

1. When the idle screen is displayed, press the

Name soft key.

Delete: allows you to delete the selected name and

number(s) from the phonebook. You are asked to

confirm that you wish to delete the name and

number(s) by pressing the Yes soft key.

2. Press the Select soft key when Search is

highlighted. You are asked to enter a name.

3. Enter the start of the name that you wish to find.

Copy: allows you to copy the selected number to

another location. Use this option to store a number

similar to one already in memory; select the

location for the new number. Once copied, edit the

name and number.

The phonebook entries are listed, starting with

the first entry matching your input. This entry is

also highlighted.

Phonebook

To...

Then press the...

View soft key.

View the high-

lighted entry

View soft key.

View the high-

lighted entry

Select a different

entry

key until the

Select a different

entry

key until the

required entry is high-

lighted.

required entry is highlighted.

6. Once you have found the required entry, press

the key to dial the number, or press the

Look for a name

starting with a

different letter

key to clear the letters

already entered and then

press the key labelled with

the required letter.

Options soft key to access the phonebook entry

options; for further details, see page 34.

5. Once you have found the required entry, press

the key to dial the number, or press the

Editing a Caller Group

Options soft key to access the phonebook entry

options; for further details, see page 34.

1. When the idle screen is displayed, press the

Name soft key.

Searching for a Number by Caller Group

2. Scroll to Group Edit by pressing the

key and press the Select soft key.

1. When the idle screen is displayed, press the

Name soft key.

3. Scroll through the group list by pressing the

or key.

2. Scroll to Group Search by pressing the

key and press the Select soft key.

4. When the required group is highlighted, press

the Options soft key.

3. Enter the first few letters of the group name that

you want to find.

5. Select each option and change the settings, as

required. The following options are available.

The caller groups are listed, starting with the

first group matching your input.

Call ring tone: allows you to select the ring

tone to be used when you receive a voice call

from a person in the group.

4. Scroll to the required group by pressing the

key and press the View soft key.

SMS tone: allows you to select the ring tone to

be used when you receive a text message from

a person in the group.

The phonebook entries in the selected caller

group are listed.

Phonebook

Graphic: allows you to select the graphic icon

to be displayed when you receive a voice call

from a person in the group.

5. Select the required number if the entry has

more than one number, by pressing the

or key and press the Select soft key.

Group Name: allows you to assign a name to

the group; for information on how to enter

characters, see page 42.

6. Once you have assigned a number to the

selected key, four options are available when

you press the Options soft key.

6. When you have finished, press the

key.

Change: allows you to assign a different

number to the key.

Delete: allows you to clear the setting so that

no number is assigned to the key.

Speed-Dialling

Delete All: allows you to clear the settings for

all keys so that no numbers are assigned to any

of the keys.

Once you have stored phone numbers in the SIM

card, you can set up to eight speed-dial entries and

then dial them easily whenever you want, simply by

pressing the associated number key.

Number: allows you to view the number

assigned to the key.

7. When you have finished, press the

key.

Setting Up Speed-Dial Entries

1. When the idle screen is displayed, press the

Name soft key.

Speed-Dialling from the Phonebook

2. Scroll to Speed Dial by pressing the

To speed-dial the numbers assigned to keys

key and press the Select soft key.

press and hold down the appropriate key.

3. Select the key to which you wish to assign the

Note: Memory location 1 is reserved for your Voice

speed-dialling feature (keys

) and

Mail server number.

press the OK soft key.

Note: If you have already assigned a number to

the key, the Options soft key replaces the

OK soft key. Go to Step 6.

4. Select the required phonebook entry from the

list and press the View soft key.

Phonebook

Deleting All Phonebook Entries

Checking the Memory Status

You can check how many names and numbers are

stored in the phonebook (SIM card and phone

memories) or how many free locations remain.

You can delete all entries in either the phone or SIM

card memory or in both memories together.

1. When the idle screen is displayed, press the

Name soft key.

2. Scroll to Delete All by pressing the

2. Select the Memory Status option by pressing

key and press the Select soft key.

the

key and press the Select soft key.

To...

Then press the...

Mark soft key.

3. Press the

or key to view the number of

entries in the card and phone memories in

relation to the total capacity of each memory.

Select the

memory(ies)

to be cleared

4. When you have finished checking, press the

key.

Cancel the selection Unmark soft key.

Delete all entries

in the selected

memory(ies)

Delete soft key.

4. Enter the phone password and press the OK soft

key.

Note: The password is preset to 00000000. To

change it, see page 88.

5. When the confirmation message is displayed,

press the Yes soft key.

6. When you have finished, press the

key.

Entering Text

Changing the Text Input Mode

When using your phone, you will often need to

enter text. For example, when storing a name in the

phonebook, creating your personal greeting or

scheduling events in your calendar. You can enter

alphanumeric characters by using your phone’s

keypad.

When you are in a field that allows characters to be

entered, you will notice the text input mode

indicator in the display.

Example: Writing a text message

You are provided with the following text input

modes.

Text input mode

indicator

• T9 mode

This mode allows you to enter words with only

one keystroke per letter. Each key on the keypad

has more than one letter – when you press

the

key once, J, K or L may be displayed.

The T9 mode automatically compares your

keystrokes with an internal linguistic dictionary to

determine the correct word, thus requiring far

fewer keystrokes than the traditional upper/

lower-case character modes.

Options

918

To select the...

Then press the

key until...

soft

• Upper/lower-case character modes

These modes allow you to enter letters by

pressing the key labelled with the required letter

once, twice, three or four times until the letter is

displayed.

T9 mode

is displayed.

See page 44.

Upper-case character

mode

is displayed.

See page 46.

• Symbol mode

This mode allows you to enter symbols, such as

punctuation marks.

Lower-case character

mode

is displayed.

See page 46.

• Number mode

Symbol mode

is displayed.

See page 47.

This mode allows you to enter numbers.

Number mode

is displayed.

See page 47.

Entering Text

Using the T9 Mode

• To enter full stops, hyphens or apostrophes, press

The T9 predictive text input mode allows you to key

in any character using single keystrokes. This text

input mode is based on a built-in dictionary.

the

key. The T9 mode applies grammar rules

to ensure that the correct punctuation is used.

Example:

is used twice to display two

punctuation marks:

1. When you are in the T9 predictive text input

mode, start entering a word by pressing

keys

. Press each key only once for

one letter.

’

Example: To enter Hello in the T9 mode,

press and

• To change the case in the T9 mode, use

the key. There are two cases:

The word that you are typing appears in the

display. It may change with each key that you

press.

Lower case

Upper case

2. Enter the whole word before editing or deleting

the keystrokes.

• You can move the cursor by using the

and keys. To delete letters, press the

key.

3. If the word is correct, start entering the next

word.

Press and hold down the

display.

key to clear the

Otherwise, press the

key

repeatedly to display alternative word choices

for the keys that you have pressed.

Example: Both Of and Me have the sequence

. The phone displays the

most commonly used choice first.

4. Complete each word with a space by pressing

the

key.

• To type words not found in the T9 mode, change

the text input mode to the upper/lower-case

character input mode.

Entering Text

Using the Upper/Lower-Case

Character Modes

• To insert a space, press the

key.

Use the

keys to enter your text.

• You can move the cursor by using the

and keys. To delete letters, press the

1. Press the key labelled with the required letter:

key.

Press and hold down the

display.

key to clear the

- Once for the first letter

- Twice for the second letter

- And so on

2. Select the other letters in the same way.

Using the Symbol Mode

Note: The cursor moves to the right when you press a

different key. When entering the same letter

twice or a different letter on the same key, just

wait for a few seconds for the cursor to move

right automatically, and then select the next

letter.

The Symbol mode enables you to insert symbols in

a text message.

Refer to the table below for more information about

the characters available.

Characters in the Order Displayed

Key

Upper Case

Lower Case

918

Space

Use the navigation keys to scroll to the required

symbol and then press the OK soft key to insert the

highlighted symbol into your message.

Using the Number Mode

The Number mode enables you to enter numbers in

a text message (a telephone number for example).

Press the keys corresponding to the required digits

before manually switching back to the appropriate

text input mode.

Options During a Call

Your phone provides a number of control functions

that you can use during a call.

Switching the Microphone Off (Mute)

You can temporarily switch your phone’s micro-

phone off, so that the other party cannot hear you.

Putting a Call on Hold

Example: You wish to say something to another

person in the room but do not want the

other party to hear you.

You can place the current call on hold whenever you

want. You can make another call while you have a

call in progress if this service is supported by the

network. Of these two calls, one is active and the

other is on hold and you can swap between the calls.

To switch the microphone off temporarily, proceed

as follows.

1. Press the Options soft key.

To place a call on hold, simply press the Hold soft

key. You can reactivate the call whenever you want,

by pressing the Unhold soft key.

2. If necessary, press the

key to highlight the

Mute option.

To make a call while you have a call in progress,

proceed as follows.

3. Press the OK soft key.

The other party can no longer hear you.

1. Key in the phone number that you wish to dial or

look it up in the phonebook.

To switch the microphone back on, proceed as

follows.

2. Press the

key to dial the second call.

1. Press the Options soft key.

The first call is automatically put on hold.

Or alternatively, proceed as follows.

2. If necessary, press the

key to highlight the

Unmute option.

1. Put the current call on hold by pressing the Hold

soft key.

3. Press the OK soft key.

2. Make the second call in the normal way.

The other party can hear you again.

To swap between the two calls, simply press the

Swap soft key.

The current call is placed on hold and the call on

hold is reactivated so that you can continue

conversing with the other party.

When you have finished, end each call normally by

pressing the

key.

Options During a Call

Muting/Sending Key Tones

Searching for a Number in the

Phonebook

These options allow you to turn the key tones off or

on. If the Mute keys option is selected, your phone

does not transmit the key tones. It allows you to

press keys without hearing annoying key tones

during a call.

You can search for a number in the phonebook

during a call.

1. Press the Options soft key.

Note: To communicate with answering machines or

computerised telephony systems, the Send

keys option must be selected.

2. Press the

option.

key to highlight the Phonebook

3. Press the OK soft key.

The phonebook entries are listed.

Sending DTMF Tones

4. Enter the name that you wish to find.

You can send the DTMF (dual tone multi-frequency)

tones corresponding to a number entered during a

call.

If you enter the start of the name, the

phonebook entries are listed, starting with the

first entry matching your input. The entry is also

highlighted.

This option is helpful when submitting a password

or account number to an automated system, like a

banking service.

5. Scroll to an entry by pressing the

key,

and press the View soft key to view the

highlighted entry.

To send DTMF tones, proceed as follows.

1. When you are connected to the teleservice

For a more detailed description of the Phonebook

feature, refer to page 31.

system, press the Options soft key.

2. Press the

option.

key to highlight the Send DTMF

3. Press the OK soft key.

Using the SMS Service

4. Enter the number you wish to send and press

the OK soft key.

If you receive an SMS (Short Message Service)

message during a call, the message icon

in the display. The SMS Service option enables you

to use this feature.

flashes

The tones corresponding to the number

displayed are sent.

Note: You can also search for a number in the

phonebook by pressing the Name soft key. For

a more detailed description of the Phonebook

feature, refer to page 31.

For further details on the SMS service, refer to

page 62.

Options During a Call

4. To add a new person to the multiparty call, call

the person in the normal way, then press the

Options soft key and select the Join option.

Answering a Second Call

You can answer an incoming call while you have a

call in progress, if this service is supported by the

network and you have set the Call Waiting menu

option (Menu 6.3) to Activate (see page 107). You

will be notified of an incoming call by a call waiting

tone.

You can add incoming callers by answering the call

and pressing Options, followed by Join. Repeat as

required.

Having a Private Conversation With One

Participant

To answer a call while you have a call in progress,

proceed as follows.

1. Press the Options soft key and choose the

1. Press the

key to answer the incoming call.

Select one option.

The first call is automatically put on hold.

The list of call participants appears.

2. To switch between the two calls, press the Swap

2. Highlight the required person, by pressing

soft key.

the

key or the

key, followed by the Select soft

key.

To end a held call, press the Options soft key

and select the End Held Call option.

3. Select the Private option.

3. To end the current call, press the

key.

Now you can talk privately with that person. The

other participants can continue to converse with

each other.

Making a Multiparty Call

4. To return to the multiparty call, press the

A multiparty call is a network service that allows up

to six people to take part simultaneously in a

multiparty or conference call. For more information,

contact your service provider.

Options soft key and select Join.

All of the multiparty call participants can now

hear each other.

Setting up the Multiparty Call

1. Call the first participant in the normal way.

2. Call the second participant in the normal way.

The first call is automatically put on hold.

3. To join the first participant to the multiparty call,

press the Options soft key and select the Join

option.

Options During a Call

Using the Menus

The phone offers a range of functions that allow you

to tailor the phone to your needs. These functions

are arranged in menus and sub-menus.

Dropping One Participant

1. Press the Options soft key and choose the

Select one option.

The menus and sub-menus can be accessed by

scrolling with the navigation keys or by using the

shortcuts.

The list of call participants appears.

2. Highlight the required person, by pressing

the

key or the

key, followed by the Select soft

key.

Accessing Menu Functions by Scrolling

1. In idle mode, press the Menu soft key to access

3. Select Remove.

the menu facility.

The call is ended with that participant, but you

can continue to talk with the other participants.

2. Scroll with the

and

keys to reach the

required main menu, Phone Settings for

example. Press the Select soft key or the key

to enter the menu.

4. End the multiparty call by pressing the

key.

3. If the menu contains any sub-menus,

Language for example, you can access them by

scrolling with the

and

keys and pressing

the Select soft key.

If the menu that you have selected contains

further options, repeat the same procedure.

4. To...

Then press the...

Scroll through

the menus

key or use

and keys on

the

the left side of the

phone.

Confirm the

Select soft key or

chosen setting

the key.

Return to the

previous menu level

soft key or the

key.

Exit the menu without

changing the settings

key.

Using the Menus

1. Messages (see page 62)

Accessing Menu Functions by

Using Shortcuts

1.1 Inbox

1.2 Outbox

1.3 Write New

1.4 Templates

1.5 Settings

1.5.1 Setting 1^*

The menu items (menu, sub-menus and options)

are numbered and can be accessed quickly by using

their shortcut number. The shortcut number is

1.5.2 Setting 2

1.5.3 Setting 3

1.5.4 Setting 4

shown in the bottom right next to the

soft key on

the display. Simply press the Menu soft key and

key in the required number.

1.5.5 Setting 5

1.5.6 Common Setting

1.6 Delete All

1.7 My Objects

Note: The numbers assigned to each menu option are

indicated in the list on page 57. They may not

match the menu number on the phone. It

depends on the services supported by your SIM

card.

1.7.1 My Melody

1.7.2 My Picture

1.7.3 My Animation

1.7.4 Delete All

Example: Accessing the Language option.

1.8 Memory Status

1.8.1 SIM memory

1.8.2 PHONE memory

1.8.3 CB memory

1. Press the Menu soft key.

2. Press

3. Press

for Phone Settings.

1.9 Voice Mail

1.9.1 Connect to Voice Server

1.9.2 Voice Service Number

for Language.

1.10 Broadcast

The languages available are displayed directly.

1.10.1 Read

1.10.2 Receive

1.10.3 Channel List

1.10.4 Language

List of Menu Functions

The following list shows the menu structure

available and indicates the:

2. Call Records (see page 74)

2.1 Missed Calls

2.2 Received Calls

2.3 Dialled Calls

2.4 Delete All

• Number assigned to each option

• Page on which you can find a description of each

feature

Note: If you use a SIM AT card that provides

additional services, the SIM AT menu is

displayed first when you press the Menu soft

key to enter the menu facility. For further

details, refer to your SIM card documentation.

* Shown only if supported by your SIM card.

Using the Menus

2. Call Records (continued)

4. Phone Settings (see page 83)

2.5 Call Time

4.1 Infrared Activate

4.2 My Settings

4.2.1 Wallpaper

4.2.2 Menu Style

4.2.3 Auto Key Lock

4.3 Greeting Message

4.4 Own Number

4.4.1 Number 1

4.4.2 Number 2

4.4.3 Number 3

4.5 Language

2.5.1 Last Call Time

2.5.2 Total Sent

2.5.3 Total Received

2.5.4 Reset Timers

2.6 Call Cost

2.6.1 Last Call Cost

2.6.2 Total Cost

2.6.3 Max Cost

2.6.4 Reset Counters

2.6.5 Set Max Cost

2.6.6 Price/Unit

4.6 Security

4.6.1 PIN Check

4.6.2 Change PIN

4.6.3 Phone Lock

3. Sound Settings (see page 78)

3.1 Ring Tone

3.2 Ring Volume

3.3 Alert Type

3.3.1 Light Only

3.3.2 Melody

3.3.3 Vibration

3.3.4 Vibra+Melody

3.4 Keypad Tone

3.4.1 Off

4.6.4 Change Password

4.6.5 SIM Lock

4.6.6 FDN Mode^*

4.6.7 Change PIN2

4.7 Display Settings

4.7.1 Brightness

4.7.2 Back Light

4.7.3 Service Light

4.7.4 Graphic Logo

3.4.2 Cool

3.4.3 Piano

3.4.4 Tone

3.4.5 Beep

4.8 Extra Settings

4.8.1 Auto Redial

4.8.2 Anykey Answer

4.9 Short Cut

3.5 Message Tone

3.5.1 SMS Tone

3.5.2 SMS-CB Tone

3.6 Power On/Off

3.6.1 Off

3.6.2 Classical

3.6.3 Cheerful

3.7 Extra Tones

3.7.1 Error Tone

3.7.2 Minute Minder

3.7.3 Connect Tone

4.9.1 Key up

4.9.2 Key down

4.9.3 Key right

4.9.4 Key left

4.10 Reset Settings

* Shown only if supported by your SIM card.

Using the Menus

5. Organiser (see page 93)

6. Network Services (continued)

5.1 Calendar

5.2 To Do List

6.5 Caller ID

6.5.1 Default

5.3 Time & Date

5.3.1 Set Time

5.3.2 Set Date

5.3.3 World Time

5.3.4 Time Format

5.4 Alarm

5.4.1 Once Alarm

5.4.2 Daily Alarm

5.4.3 Morning Call

5.4.4 Remove Alarm

5.4.5 Autopower

5.5 Calculator

6.5.2 Hide Number

6.5.3 Send Number

6.6 Closed User Group

6.6.1 Index List

6.6.2 Outside Access

6.6.3 Default Group

6.6.4 Deactivate^*

7. Fun Box (see page 111)

7.1 Games

7.1.1 Honey Ball

7.1.2 Hamster Box

7.2 WAP Browser

7.2.1 Home

7.2.2 Favorite

7.2.3 http://

7.2.4 Settings

7.2.5 Clear Cache

7.3 Downloads

7.3.1 Games & More

7.3.2 Sounds

5.6 Currency Exchange

6. Network Services (see page 103)

6.1 Call Diverting

6.1.1 Divert Always

6.1.2 Busy

6.1.3 No Reply

6.1.4 Unreachable

6.1.5 Cancel All

6.2 Call Barring

7.3.3 Pictures

7.3.4 DNS Setting

6.2.1 All Outgoing

6.2.2 International

6.2.3 International Except to Home

6.2.4 All Incoming

6.2.5 Incoming While Abroad

6.2.6 Cancel All

6.2.7 Change Barring Password

6.3 Call Waiting

6.3.1 Voice Calls

6.3.2 Fax Calls

6.3.3 Data Calls

6.3.4 Cancel All

6.4 Network Selection

6.4.1 Automatic

6.4.2 Manual

* Shown only if the Closed User Group feature is active.

Messages

The SMS (Short Message Service) function is a

network service and may not be supported by your

network. Messages can be sent by text, fax, E-mail

and paging messaging systems, provided that these

services are supported by your network. To send

text messages by phone, you must obtain the

number of the SMS centre from your service

provider.

While reading a message, you can choose the

following options by pressing the Options soft key.

Delete: allows you to delete the message.

Send: allows you to resend the message. For

further information on how to send a message, see

page 65.

Reply: allows you to reply to the sender by sending

a text message.

When the message icon

appears, you have

received new text messages. If the message

memory is full, an error message is displayed and

you cannot receive any new messages. Use the

Delete option in your inbox and outbox to delete

obsolete messages.

Call Back: allows you to call the sender back.

Cut Address: allows you to extract URL or

E-mail addresses or phone numbers from the

message text, so that you can save them in the

phone memory.

When you receive a new message in the key lock

mode, you cannot view it without unlocking the

keypad. To do so, press the Unlock soft key and

Move To Phone: allows you to move the message

from the SIM card to the phone memory. This

option is only available when you select a message

stored in the SIM card.

the

key.

Move To Sim: allows you to move the message

from the phone memory to the SIM card. This

option is only available when you select a message

stored in the phone memory.

Inbox (Menu 1.1)

The inbox is used to store the messages that you

have received.

Select Objects: allows you to save media objects,

such as sounds or images, from the message into

your phone. You can then use the objects when

writing a message; for details, see page 66.

When you select this menu, the list of messages in

the inbox is displayed with the senders’ phone

numbers or names, if available in your phonebook.

1. Select the message you wish to read from the

list and press the View soft key to view the

message contents.

Outbox (Menu 1.2)

The outbox is used to store the messages that you

have already sent or will send.

2. To scroll through the message, press the

key.

When you select this menu, the list of messages in

the outbox is displayed with the recipients’ phone

numbers or names, if available in your phonebook.

3. To scroll to the previous or next message, press

the or key.

Messages

1. Select the message you wish to read from the

list and press the View soft key to view the

message contents.

Write New (Menu 1.3)

Via this menu, you can write and send a text

message.

2. To scroll through the message, press the

Note: You can enter up to 918 alphanumeric

characters for your message. If you add media

objects to the message, the number of

characters you can enter is decreased.

key.

3. To scroll to the previous or next message, press

the or key.

While reading a message, you can choose the

following options by pressing the Options soft key.

Creating a Simple Text Message

1. Create your message as required.

Delete: allows you to delete the message.

Note: For information on how to enter characters,

Send: allows you to (re)send the message. For

further information on how to send a message, see

page 65.

refer to page 42.

2. When you have completed your message, press

the Options soft key. The following options are

available.

Cut Address: allows you to extract URL or

E-mail addresses or phone numbers from the

message text, so that you can save them in the

phone memory.

Send: allows you to send the message. The

message will be deleted after sending.

Move To Phone: allows you to move the message

from the SIM card to the phone memory. This

option is only available when you select a message

stored in the SIM card.

Save and Send: allows you to save a copy of

the message in the specified memory and then

send the message to the required destination.

You can read the message in your outbox.

Move To Sim: allows you to move the message

from the phone memory to the SIM card. This

option is only available when you select a message

stored in the phone memory.

Save: allows you to save the message to the

specified memory so that it can be sent later.

You can read the message in your outbox.

For information about the Text Formatting,

Add Objects, Add Templates, Add

Phonebook, Add Bookmark and Language

options, see “Creating a Message Using the

Options” on page 66.

Select Objects: allows you to save media objects,

such as sounds or images, from the message into

your phone. You can then use the objects when

writing a message; for details, see page 66.

3. Select Send or Save and Send, and press the

Select soft key.

Messages

If you just want to save the message, select

Save. After saving the message, the phone

returns to the Messages menu.

Add Templates: allows you to apply one of the

preset message templates to the text. Select

one of the five messages predefined via the

Templates menu option (Menu 1.4); for

further details, see below.

4. Select the memory in which the message is to

be saved and press the OK soft key.

Add Phonebook: allows you to insert a

phonebook entry in your message. Select the

appropriate entry in the list.

5. Enter a destination number.

To look for a number in your phonebook, press

the Name soft key and select one from the list.

Add Bookmark: allows you to add the address

of a Web page stored in your Favourites list

(Menu 7.2.2). Select the Web page from the

list.

6. Press the OK soft key. The message is sent.

Note: If the phone fails to send the message, it

asks you if you want to retry. Press the

OK soft key to resend it. Otherwise, press

the Exit soft key.

Language: allows you to change the language

to be used in the T9 input mode. Select the

language to be used.

Creating a Message Using the Options

4. Complete the message, and send or save it by

following the procedure from Step 3 on page 65.

1. Create your message as required.

2. Press the Options soft key.

Templates (Menu 1.4)

3. Select one of the following options as required

Using this menu, you can preset up to five messages

that you use most frequently. Scroll through the

by using the

and

keys and pressing the

Select soft key.

template list using the

and

keys. When the

Text Formatting: allows you to format the

style of the text. For the Size attribute, the

Normal, Large and Small sizes are available.

For the Underline and Strikethrough

attributes, select On or Off. The attributes can

be combined.

required message template is highlighted, press the

Options soft key.

Edit: allows you to write a new message or edit the

selected message.

Note: For information on how to enter characters,

refer to page 42.

Add Objects: allows you to add the required

sound, melody, picture or animation to the

message. Select the category of object to be

added. In each category, you can select the

various factory-set items or choose an item

received from other sources, such as the

Internet or other phones.

Send Message: allows you to recall the selected

message. Once you have completed the message,

you can send, save and send, or simply save it. For

details on how to send a message, see page 65.

Delete: allows you to delete the selected message.

You are asked to confirm the deletion by pressing

the Yes soft key.

Messages

Common Setting: the following options are

available.

Settings (Menu 1.5)

Via this menu, you can set up default SMS

information. A setting group is a collection of

settings required to send messages. The number of

setting groups available depends on the capacity of

your SIM card.

Reply Path: allows the recipient of your SMS

message to send you a reply message via your

message centre, if the service is provided by the

network.

Delivery Reports: allows you to activate or

deactivate the report function. When this function is

activated, the network informs you whether your

message has been delivered or not.

Note: The last setting group accessed is used

automatically when you send a message.

Setting x (where x is the setting group number):

each group has its own sub-menu.

Bearer Selection: allows you to choose between

GSM and GPRS.

Service Centre: allows you to store or change the

number of your SMS centre required when sending

messages. You must obtain this number from your

service provider.

Delete All (Menu 1.6)

This menu option allows you to delete all of the

messages in each message box. You can also delete

all of your messages at one time.

Default Destination: allows you to store the default

destination number. The number will automatically

be displayed on the Destination screen when you

create a message.

To…

Press the…

Default Type: allows you to set the default message

type (Text, Fax, E-mail and Paging). The network

can convert the messages into the selected format.

Select a message box

to clear

key. To delete

all of your messages,

select All Messages

Default Validity: allows you to set the length of time

for which your text messages will be stored at the

message centre while attempts are made to deliver

them.

Place a check mark

Mark soft key.

Remove the check

mark

Unmark soft key.

Setting Name: allows you to give a name to the

setting group currently being defined.

Delete the marked

messages

Delete soft key.

When a confirmation message is displayed, press

the Yes soft key to confirm.

Messages

My Objects (Menu 1.7)

Memory Status (Menu 1.8)

After saving any objects received in messages into

your phone memory, using the Select Objects

option (see page 63), you can see the objects in

this menu.

This menu shows how many messages are currently

stored in the SIM, phone and cell broadcast (CB)

memories.

Three categories of objects are available:

Voice Mail (Menu 1.9)

•

My Melody

My Picture

My Animation

This menu provides you with a way of accessing

your voice mailbox (if provided by your network).

The following options are available.

To delete a selected object, press the Delete soft

key.

Connect to Voice Server: before using this

feature, you must enter the voice server

number obtained from your service provider (see

menu 1.9.2). You can then select this option and

simply press the OK soft key to listen to your

messages.

You can delete all objects using the Delete All

option (Menu 1.7.4).

To...

Then press the...

Select a category of

objects to be deleted

Mark soft key.

To quickly connect to the voice server, press and

hold down the

key in idle mode.

Cancel the selection

Unmark soft key.

Voice Service Number: allows you to change the

voice mail server number, if necessary.

Delete the objects in the

selected category(ies)

Delete soft key.

To...

Then press the...

If you want to delete all objects, select All Objects.

Enter the server

number

Corresponding numeric

keys.

Correct a digit

key.

Move the cursor to

the left/right without

clearing the digit

or key.

Note: Voice Mail is a network feature. Please contact

your service provider for more information.

Messages

Language: allows you to select your preferred

language to be used when displaying cell broadcast

messages.

Broadcast (Menu 1.10)

This network service allows you to receive text

messages on various topics, such as the weather or

traffic. Messages are displayed immediately they

are received, provided that:

Please contact your service provider for more

information.

• The phone is in idle mode

• The Receive option is set to Enable

• The message channel is currently active in the

channel list

The following options are available.

Read: lets you view the message. Volatile displays

the messages from the network, but loses its

contents as soon as the phone is switched off. Scroll

through the message using the

and

keys.

While reading a message, press the Save soft key

to store the message in the Archive box for later

retrieval.

Receive: allows you to enable or disable the

reception of broadcast messages.

Channel List: allows you to indicate the channels

from which you wish to receive broadcast

messages. The following options are available.

Select: used to enable or disable channels in the list

by marking or unmarking them respectively.

Add Channel: used to declare the ID and title for a

new channel.

Delete: used to remove a channel from the list.

Edit: used to change the ID and title of an existing

channel.

Call Records

Via this menu, you can view the:

Dialled Calls (Menu 2.3)

• Missed, received or dialled calls

• Length of a call you made or received

• Cost of your calls

This option lets you view the last 20 numbers

dialled.

The number and name, if available, are displayed,

together with the date and time at which the call

was made. By pressing the Options soft key, you

can:

Note: You can access all numbers in the three types

of call records by pressing the

mode.

key in idle

Missed Calls (Menu 2.1)

• Delete the number

• Edit the number and save it in the phonebook

This option lets you view the last 20 unanswered

calls.

You can also dial the number by pressing the

key.

The number and name, if available, are displayed,

together with the date and time at which the call

was received. By pressing the Options soft key,

you can:

Delete All (Menu 2.4)

You can delete all numbers stored in each call record.

• Delete the call from the list

• Edit the number, if available, and save it in the

phonebook

To...

Then press the...

or key,

followed by the Mark

soft key.

Select the type(s) of calls

to be deleted

You can also dial the number by pressing the

key.

Received Calls (Menu 2.2)

Cancel the selection

Unmark soft key.

This option lets you view the last 20 phone calls

answered.

Delete all calls of the

selected type

Delete soft key.

The number and name, if available, are displayed,

together with the date and time at which the call

was received. By pressing the Options soft key,

you can:

When the confirmation message is displayed, press

the Yes soft key to confirm.

• Delete the call from the list

• Edit the number, if available, and save it in the

phonebook

You can also dial the number by pressing the

key.

Call Records

Call Time (Menu 2.5)

Max Cost: maximum cost set via the Set Max Cost

option (see below).

This option lets you view the timers for calls made

and received.

Reset Counters: option used to reset the cost

counter; you must first enter your PIN2 (see

page 126) and then press the OK soft key.

Note: The actual time invoiced for calls by your

service provider may vary, depending on

network features, such as rounding-off for

billing purposes.

Set Max Cost: option used to enter the maximum

cost that you authorise for your calls; you must first

enter your PIN2 (see page 126) and then press the

OK soft key.

The following timers are available.

Last Call Time: length of the last call.

Total Sent: total length of all calls made since the

timer was last reset.

Price/Unit: option used to set the cost of one unit;

this price per unit is applied when calculating the

cost of your calls; you must first enter your PIN2

(see page 126) and then press the OK soft key.

Total Received: total length of all calls received

since the timer was last reset.

Reset Timers: option used to reset the call timers;

you must first enter the phone password (see

page 124) and then press the OK soft key.

Call Cost^*(Menu 2.6)

This feature lets you view the cost of calls. Depending

on your SIM card, this menu option may not be

shown.

The following timers are available.

Last Call Cost: cost of the last call made.

Total Cost: total cost of all calls made since the cost

counter was last reset. If the total cost exceeds the

maximum cost set via the Set Max Cost option, you

can no longer make any calls until you reset the

counter.

* Shown only if supported by your SIM card.

Sound Settings

You can use the Sound Settings feature to

customise various settings, such as the:

Alert Type (Menu 3.3)

This option allows you to specify how you are to be

informed of any incoming calls.

• Ring melody, volume and type

• Sounds made when you press a key, make an

error or receive a message

The following options are available.

Light Only: only the backlight is switched on; the

Note: When the phone is in the silent mode (see

page 28), you cannot change the sound

settings.

phone neither rings nor vibrates.

Melody: the phone rings using the ring melody

selected via the Ring Tone menu option

(Menu 3.1); see page 78.

Ring Tone (Menu 3.1)

Vibration: the phone vibrates but does not ring.

Vibra+Melody: the phone first vibrates three

times and then starts ringing.

This option allows you to select the required ring

melody.

You can choose between many different melodies.

Each time you select a melody, it is played for a few

seconds. If you have downloaded any sounds from

the Internet or EasyGPRS program, you can view

the list in this menu.

Keypad Tone (Menu 3.4)

This option allows you to select the tone that the

keypad generates when you press a key.

The following options are available.

Ring Volume (Menu 3.2)

Off: the keys do not make any sound.

Cool: each key, when pressed, generates a pure

sound.

This option allows you to adjust the ring volume to

one of five levels.

Piano: each key, when pressed, generates a

different note in the musical scale.

Use the

the left side of the phone.

and

keys or the

and

keys on

Tone: each key, when pressed, makes a different

sound.

Beep: each key, when pressed, makes the same

sound.

Sound Settings

Message Tone (Menu 3.5)

Power On/Off (Menu 3.6)

This option allows you to select how the phone

informs you that a new message has been received.

This option allows you to turn on or off the sounds

that the phone generates when it is switched on

and off.

SMS Tone (Menu 3.5.1)

The following options are available.

This option allows you to select how the phone

informs you that a new SMS message has been

received.

Off: when you switch the phone on and off, you do

not hear a jingle.

Classical: when you switch the phone on and off,

you hear the default jingle.

The following options are available.

Off: the phone does not use the SMS tone.

Cheerful: when you switch the phone on and off,

you hear a cheerful jingle.

Light Only: the service light on the top left of the

phone flashes.

Vibration: the phone vibrates.

Single Beep: the phone beeps once.

SMS ToneX: the phone uses an SMS tone. You are

provided with several SMS tones.

SMS-CB Tone (Menu 3.5.2)

This option allows you to select how the phone

informs you that a new cell broadcast (CB) message

has been received.

The following options are available.

Off: the phone does not use the CB tone.

Light Only: the service light on the top left of the

phone flashes.

Vibration: the phone vibrates.

Single Beep: the phone beeps once.

SMS-CB ToneX: the phone uses a CB tone. You are

provided with several CB tones.

Sound Settings

Phone Settings

Many different features of your phone can be

customised to suit your preferences. All of these

features are accessed via the Phone Settings

menu.

Extra Tones (Menu 3.7)

You can customise various other tones used by the

phone.

To turn a given Then press the...

tone...

Infrared Activate (Menu 4.1)

On soft key.

A check mark is displayed in

front of the option.

This feature allows you to send or receive data/fax

through the infrared port. To use an infrared

connection, you must:

• Configure and activate an IrDA-compliant

infrared port on your PC

Off

Off soft key.

The check mark is no longer

displayed.

• Activate the infrared feature on the phone; the

IrDA icon ( ) appears on the top line of the

display

The following options are available.

• Align the IrDA port on the phone with the IrDA

port on your computer

Error Tone: indicates whether the phone must

beep to inform you if you have made a mistake.

Minute Minder: indicates whether the phone must

beep every minute during an outgoing call to keep

you informed of the length of your call.

IrDA port

Connect Tone: indicates whether the phone must

beep when the phone connects to the network.

IrDA port

The connection is ready for data transmission.

If there is no communication between your phone

and the IrDA-compliant device within 30 seconds of

activating the feature, it is automatically

deactivated.

Note: For best results, it is highly recommended that

you use the optional data cable. You can buy one

from your local Samsung dealer.

Phone Settings

Auto Key Lock (Menu 4.2.3)

My Settings (Menu 4.2)

This menu option allows you to set the phone to

automatically lock the keys if no key is pressed

within a given period of time. This feature is useful

to avoid pressing keys by mistake.

You can change the background image and the

menu display style according to your preference.

Wallpaper (Menu 4.2.1)

To use this feature, select the length of time for

which the phone waits before it locks the keypad.

This option allows you to change the background

image (wallpaper) to be displayed in idle mode.

15 Sec

30 Sec, 1 Min and 2 Min are available.

To change the background image, proceed as

follows.

If you do not want to use this feature, select Off

Note: You can manually lock the keypad. For further

1. Scroll through the list by pressing the

key.

details, see page 21.

You have various preset images available. You

can also select a blank background or any images

downloaded from the Internet or the EasyGPRS

program.

Greeting Message (Menu 4.3)

This option allows you to set a greeting message to

be displayed briefly when the phone is switched on.

When you select this menu option, the current

message is displayed.

2. Press the View soft key when the required

image is highlighted.

The selected image is displayed.

To...

Then press the...

key and hold it down until

3. After viewing the image, press the Select soft

key to display it on the idle screen.

Clear the

existing message the message is cleared.

To display the...

Press the...

Enter a new

message

Appropriate alphanumeric

keys.

Current date and time on top Yes soft key.

of the wallpaper image

Change the text

input mode

soft key.

Wallpaper image only

No soft key.

For information on how to enter characters, refer to

page 42.

Menu Style (Menu 4.2.2)

This option allows you to select the menu display

style. You can choose between Bar Style and

Zoom Style.

Phone Settings

PIN Check (Menu 4.6.1)

Own Number (Menu 4.4)

When the PIN Check feature is enabled, you must

enter your PIN each time you switch the phone on.

Consequently, any person who does not have your

PIN cannot use your phone without your approval.

This feature allows you to:

• Assign a name to your own phone number

registered on your SIM card

• Edit the name and number

Note: Before disabling the PIN Check feature, you

must enter your PIN.

This function is a memory aid, which you can use to

check your own phone number if you need to do so.

To change your PIN, refer to the Change PIN menu

option (Menu 4.6.2).

Any changes made here do not in any way affect

the actual subscriber number on your SIM card.

The following options are available.

Disable: the phone connects directly to the

network when you switch it on.

Language (Menu 4.5)

Enable: you must enter the PIN each time the

phone is switched on.

You can select a display language. When the

language option is set to Automatic, the language

is automatically selected according to the language

of the SIM card used.

Change PIN (Menu 4.6.2)

This feature allows you to change your current PIN

to a new one, provided that the PIN Check feature

is enabled. You must enter the current PIN before

you can specify a new one.

Security (Menu 4.6)

The Security feature enables you to restrict the use

of your phone to:

Once you have entered a new PIN, you are asked to

confirm it by entering it again.

• The people of your choice

• The types of calls of your choice

Phone Lock (Menu 4.6.3)

Various codes and passwords are used to protect

the features of your phone. They are described in

the following sections (see also pages 124-127).

When the Phone Lock feature is enabled, the phone

is locked and you must enter the 8-digit phone

password each time the phone is switched on.

The password is factory set to 00000000. To change

the phone password, refer to the Change

Password menu option (Menu 4.6.4) on page 88.

Phone Settings

Once the correct password has been entered, you

can use the phone until you switch it off.

FDN Mode (Menu 4.6.6)

The FDN (Fixed Dial Number) mode, if supported by

your SIM card, allows you to restrict your outgoing

calls to a limited set of phone numbers.

The following options are available.

Disable: you are not asked to enter the phone

password when you switch the phone on.

The following options are available.

Enable: you are required to enter the phone

password when you switch the phone on.

Disable: you can phone any number.

Enable: you can only call phone numbers stored in

the phonebook. You must enter your PIN2.

Change Password (Menu 4.6.4)

Note: Not all SIM cards have a PIN2. If your SIM card

The Change Password feature allows you to change

your current phone password to a new one. You

must enter the current password before you can

specify a new one.

does not, this menu option is not displayed.

To change your PIN2, refer to the Change PIN2

menu option (Menu 4.6.7) below.

The password is factory set to 00000000. Once you

have entered a new password, you are asked to

confirm it by entering it again.

Change PIN2 (Menu 4.6.7)

The Change PIN2 feature allows you to change your

current PIN2 to a new one. You must enter the

current PIN2 before you can specify a new one.

SIM Lock (Menu 4.6.5)

Once you have entered a new PIN2, you are asked

to confirm it by entering it again.

When the SIM Lock feature is enabled, your phone

only works with the current SIM. You must enter

the SIM lock code.

Note: Not all SIM cards have a PIN2. If your SIM card

Once you have entered the SIM lock code, you are

asked to confirm it by entering it again.

does not, this menu option is not displayed.

To unlock the SIM, you must enter the SIM lock

code.

Phone Settings

Graphic Logo (Menu 4.7.4)

Display Settings (Menu 4.7)

This option allows you to display your operator’s

logo instead of its name.

Brightness (Menu 4.7.1)

This option allows you to adjust the brightness of

the display to see it better in different lighting

conditions.

On: the operator logo stored in your phone is

displayed in idle mode; if no logo has been stored,

the operator name is displayed.

To adjust the display brightness, proceed as follows.

Off: the operator name is displayed in idle mode.

1. Adjust the brightness using the

and

keys

or the

phone.

and

keys on the left side of the

Extra Settings (Menu 4.8)

2. When you are satisfied, press the OK soft key to

You can turn the automatic redialling or answering

features on or off.

save the selection.

To turn a feature... Then press the...

Back Light (Menu 4.7.2)

You can select whether or not the phone uses the

backlight. A marginal increase in standby/talk time

can be achieved by turning the backlight off.

On soft key.

A check mark is displayed

in front of the option.

Select the length of time for which the backlight is

on. The backlight comes on when you press a key

or receive a call or message and lights up for the

specified length of time. Then it dims and finally

switches to the digital clock, conserving your

battery power.

Off

Off soft key.

The check mark is no

longer displayed.

The following options are available.

If you do not want to use the backlight, select Off.

Auto Redial: when this option is checked, the

phone makes up to ten attempts to redial a phone

number after an unsuccessful call.

Service Light (Menu 4.7.3)

Note: The interval between two call attempts varies.

This option allows you to select whether or not the

service light on the top left of the phone is used and

in which colour it flashes.

Anykey Answer: when this option is checked, you

can answer an incoming call by pressing any key,

except the

soft key. To reject the call, press the

the Reject soft key.

key, the

key and the Reject

Select one of the seven colours available. When the

phone is ready for use, the service light will flash in

the appropriate colour.

key or

If you do not wish to use the service light,

select Off.

When this option is unchecked, you can only press

the key or the Accept soft key.

Phone Settings

Short Cut (Menu 4.9)

The navigation keys can be used as shortcut keys.

When held down in idle mode, they allow you to

access specific menu options directly.

To assign a shortcut to a key, proceed as follows.

1. Select the key to be used as a shortcut key by

pressing the

key, followed by the

Select soft key.

Key up (

)

Key down (

Key right ( )

Key left ( )

)

2. Select the menu option to be assigned to the

key by pressing the or key.

Note: To deactivate a shortcut key, select the

None option.

3. Press the Select soft key to save the selection.

Reset Settings (Menu 4.10)

You can easily reset your phone to its default

settings. To do so, proceed as follows.

1. Select the Reset Settings menu option.

2. Enter the 8-digit phone password and press the

OK soft key.

Note: The password is preset to 00000000. To change

this password, refer to page 88.

Organiser

The Organiser feature enables you to:

• View the calendar and organise your schedule

• Define a list of things to do

• Set the current date and time

• Set the alarm so that the phone rings at a specific

time (to remind you of an appointment for

example)

• Use the phone as a calculator for basic

mathematical equations or currency exchange

operations

Calendar (Menu 5.1)

With the Calendar feature, you can:

• Consult the calendar

• Write memos to keep track of your schedule and

trigger an alarm if necessary

Consulting the Calendar

When you select the Calendar menu option

(Menu 5.1), the calendar is displayed. The

following options are available when you press the

Options soft key.

Search all: displays all memos set, regardless of

the day and starting with the oldest. To scroll

through the memos, press the

key.

Delete all: allows you to delete all memos. You are

asked to confirm your action.

Go to date: allows you to jump to a specific date.

Exit: exits the Calendar feature and returns to the

idle mode.

Organiser

Writing a Memo

Viewing a Memo

To write or edit a memo on a specific date, proceed

as follows.

When you select a day for which a memo already

exists on the calendar, the most recent memo on

that day is displayed.

1. Select the required date in the calendar, using

the navigation keys.

If several memos exist, you can browse through

them using the

and

keys.

Note: To skip to the previous or next month, press

To add a new memo on the same day, press the

New soft key.

the

key on the left side of the

phone.

The following options are available when you press

the Options soft key.

2. Press the Select soft key.

An empty memo screen is displayed to allow you

to enter your memo.

Edit: allows you to change the memo text.

Alarm: allows you to set an alarm to ring on the

chosen day. If the alarm is already set, you can

change or remove it.

3. Enter your memo and then press the OK soft

key.

Note: For information on how to enter characters,

Delete: allows you to delete the memo.

refer to page 42.

Copy to: allows you to copy the memo to another

date.

You are asked if you wish to set the alarm.

4. If you want the alarm to ring on the chosen day,

press the Yes soft key.

Move to: allows you to change the date and/or

time of the memo.

Otherwise, press the No soft key.

5. If you pressed the Yes soft key, set the time for

the alarm and press the OK soft key.

You can select a melody for the alarm by

pressing the Melody soft key.

The colour of the date is changed to green to

indicate that a memo exists.

Organiser

Editing the To Do List

To Do List (Menu 5.2)

If tasks are already defined in the To Do List when

you select the To Do List menu option

(Menu 5.2), the current contents are displayed

This feature allows you to:

• Draw up a list of tasks to be done

with a status mark and priority (

normal and for low).

for high,

for

• Assign a priority and deadline to each task

• Sort the tasks by priority and status mark

The following options are available.

Creating the To Do List

1. Press the New soft key.

2. Enter the first task.

To...

Then...

View the details

• Highlight the task.

for a specific task

• Press the View soft key.

• Scroll through the tasks

Note: You can enter up to 40 characters. For

information on how to enter characters, see

page 42.

using the

if necessary.

and

keys,

3. Press the OK soft key.

Change the status

of a specific task

• Highlight the task.

• Press the key to mark

the task as completed as of

the current date and time.

4. Select high, normal or low priority using the

key and press the Select soft key.

5. Enter your deadline.

• Highlight the task.

If you do not want to set a deadline, press the

Skip soft key.

• Press the Options soft key.

• Select the Mark option.

• Select the appropriate

status (Done or Undo).

6. Press the OK soft key.

Create a new

task

• Press the Options soft key.

• Select the New option.

• Enter the text, priority and

deadline for the task.

Edit an existing

task

• Highlight the task.

• Press the Options soft key.

• Select the Edit option.

• Change the text, priority

and deadline for the task.

Organiser

Time & Date (Menu 5.3)

To...

Then...

This option allows you to change the current time

and date displayed. You can also check the current

time for Greenwich Mean Time (GMT) and 21 major

cities around the world.

Sort the existing

tasks by priority or • Select the Sort option.

status

• Press the Options soft key.

• Select the sort criterion

(High, Low, Done or

Undo).

The following options are available.

Copy a task

• Highlight the task.

Set Time: allows you to enter the current time. You

can choose the time format via the Time Format

menu option (Menu 5.3.4).

• Press the Options soft key.

• Select the Copy option.

• Change the text, priority

and deadline for the task as

required.

Note: Before setting the time, you must specify your

time zone, in the World Time menu option

(Menu 5.3.3).

Copy a task to the • Highlight the task.

calendar

Set Date: allows you to enter the day, month and

year.

• Press the Options soft key.

• Select the Copy to

calendar option.

• Change the text and

deadline for the task and

set the alarm as required.

World Time: allows you to check the current time

for Greenwich Mean Time (GMT) and 21 major cities

around the world, using the and keys.

The screen shows the:

• City name

Delete a task

• Highlight the task.

• Press the Options soft key.

• Select the Delete option.

• Current date and time

• Time difference between the selected city and

your city if you have set the local time (see below

for further details) or GMT (by default)

Delete all tasks

• Press the Options soft key.

• Select the Delete all

option.

• Confirm the deletion by

pressing OK.

To select the time zone in which you are located,

proceed as follows.

Exit the To Do List

• Press the Options soft key.

• Select the Exit option.

1. Select the city corresponding to your time zone

by pressing the or key one or more times.

The local date and time are displayed.

2. Press the Set soft key.

Time Format: allows you to change the time

format to 24 Hours or 12 Hours.

Organiser

Alarm (Menu 5.4)

When setting or viewing an alarm, the following

This feature allows you to:

options are available when you press the Options

soft key.

• Set the alarm to ring at a specific time

Remove Alarm: allows you to deactivate the

current alarm.

• Set the phone to switch on automatically and ring

the alarm even if the phone is switched off

(Autopower menu option set to Enable)

Alarm Sound Set: allows you to select the alarm

melody.

The following options are available.

Once Alarm: the alarm rings only once and is then

deactivated.

Calculator (Menu 5.5)

Daily Alarm: the alarm rings every day at the

same time.

With this feature, you can use the phone as a

calculator. The calculator provides the basic

arithmetic functions: addition, subtraction,

multiplication and division.

Morning Call: the alarm rings to wake you up in

the morning.

To set the alarm, proceed as follows.

1. Choose the type of alarm to be set.

2. Enter the required time.

Using the Calculator

1. Enter the first number using the numeric keys.

3. Press the OK soft key.

2. Press the right soft key until the required

arithmetic symbol appears: + (add),

– (subtract), * (multiply), / (divide).

4. If you select Morning Call in Step 1, select the

repeat option: Monday to Friday or Monday

to Saturday.

3. Enter the second number.

Remove Alarm: deactivates all alarm settings.

4. Repeat Steps 1 to 3 as many times as required.

Autopower: if this option is set to Enable, the

alarm will ring at the specified time, even when the

phone is switched off. If the menu option is set to

Disable and the phone is switched off at the

specified time, the alarm will not ring.

Notes

• To erase any mistakes and clear the display,

press the key.

• To include a decimal point or a bracket, press the

left soft key until the required symbol is

displayed.

To stop the alarm when it rings, press the Exit soft

key or the

key.

Note: You can also stop the alarm even if your phone

is in the key lock mode. Your phone returns to

the key lock mode after the specified period of

time selected in the Auto Key Lock menu

option (Menu 4.2.3).

5. To calculate the result, press the

key.

100

101

Organiser

Network Services

These menu functions are network services. Please

contact your service provider to check their

Currency Exchange (Menu 5.6)

availability and subscribe to them, if you so wish.

Using this menu option, you can make currency

conversions.

1. Enter the current exchange rate of your source

Call Diverting (Menu 6.1)

currency and press the OK soft key.

This network service enables incoming calls to be

rerouted to the number that you specify.

You can insert a decimal point by pressing

the

key.

Example: You may wish to divert your business

calls to a colleague while you are on

holiday.

2. Enter the amount for which you wish to conduct

the currency conversion and press the OK soft

key.

Call diverting can be set up in the following ways.

The local currency amount you entered and the

equivalent value in the foreigh currency are

displayed.

Divert Always: all calls are diverted.

Busy: calls are diverted if you are already on the

phone.

3. Press the Exit soft key to exit the currency

convertor.

No Reply: calls are diverted if you do not answer

the phone.

Unreachable: calls are diverted if you are not in an

area covered by your service provider.

Cancel All: all call diverting options are cancelled.

You can specify individual diverting options for each

of the following call types:

• Voice calls only

• Fax calls only

• Data calls only

102

103

Network Services

To set your call diverting options, proceed as follows.

1. Select the type of call diverting required by

Call Barring (Menu 6.2)

The call barring network service allows you to

restrict your calls.

pressing the

key until the appropriate

option is highlighted, and then press Select.

Call barring can be set up in the following ways.

All Outgoing: calls cannot be made.

2. Select the type of calls to be diverted by

pressing the

key until the appropriate

option is highlighted and then press Select.

International: international calls cannot be made.

The current status is displayed. If the option has

already been set, the number to which the calls

are diverted is displayed.

International Except to Home: when abroad,

calls can be made only to numbers within the

current country and to your home country, which is

the country where your home network provider is

located.

To...

Then press the...

All Incoming: calls cannot be received.

Activate call

diverting

Activate soft key.

Incoming While Abroad: calls cannot be received

when you are using your phone outside your home

service area.

Go to Step 4.

Change the

call number

Change soft key.

Go to Step 4.

Cancel All: all call barring settings are deactivated;

calls can be made and received normally.

Deactivate call

diverting

Remove soft key.

You can specify individual barring options for each

of the following call types:

4. Enter the number to which the calls are to be

diverted and press OK.

• Voice calls only

• Fax calls only

• Data calls only

To enter the international code, press the

key until the + sign is displayed.

To set your call barring options, proceed as follows.

5. If you have entered the No Reply option, set the

length of time for which your phone rings before

the call is diverted and press the Select soft key.

1. Select the type of call barring required by

pressing the

key until the appropriate

The phone sends your settings to the network

and the network’s acknowledgement is

displayed.

option is highlighted and then press the Select

soft key.

2. Select the type of calls to be barred by pressing

You can deactivate all call diverting settings by

selecting the Cancel All option.

the

key until the appropriate option is

highlighted and then press Select.

104

105

Network Services

3. Press the Activate soft key to confirm your

Call Waiting (Menu 6.3)

settings.

This network service enables you to be informed

when someone is trying to reach you during

another call.

4. Enter your call barring password supplied by

your service provider.

The phone sends your settings to the network

and the network’s acknowledgement is

displayed.

You can specify individual call waiting options for

each of the following call types:

• Voice calls only

• Fax calls only

• Data calls only

To deactivate specific call barring settings, proceed

as follows.

1. Select the call barring option to be deactivated.

To set your call waiting options, proceed as follows.

2. Select the type of call to which this option

applies.

1. Select the type of calls to which the call waiting

option is to be applied by pressing the

key until the appropriate option is highlighted

and then press Select.

3. Press the Deactivate soft key.

4. Enter your call barring password supplied by

your service provider.

The screen informs you whether call waiting is

activated or deactivated.

The phone sends your settings to the network

and the network’s acknowledgement is

displayed.

2. You can activate or deactivate the call waiting

feature as necessary by using the Activate or

Deactivate soft key respectively.

You can also deactivate all call barring settings by

selecting the Cancel All option.

To return to the previous screen, press the Exit

soft key.

Change Barring Password: you can set and

change the call barring password obtained from

your service provider using this option. You must

enter the current password before you can specify a

new one.

You can also deactivate all call waiting settings by

selecting the Cancel All option.

Once you have entered a new password, you are

asked to confirm it by entering it again.

106

107

Network Services

Network Selection (Menu 6.4)

Caller ID (Menu 6.5)

The Network Selection feature enables you to

indicate whether the network used when roaming

(outside your home area) is selected automatically

or manually.

You can prevent your phone number from being

displayed on the phone of the person being called.

Note: Some networks do not allow the user to change

this setting.

Note: You can select a network other than your home

network only if it has a valid roaming agree-

ment with your home network.

The following options are available.

Default: the default setting provided by the

network is used.

To indicate whether the network is to be selected

automatically or manually when roaming, proceed

as follows.

Hide Number: your number is not displayed on

the other person’s phone.

1. When Network Selection is displayed, press

Send Number: your number is sent each time you

make a call.

the Select soft key.

2. Press the

key until the appropriate

option is highlighted and then press the OK soft

key.

Closed User Group (CUG) (Menu 6.6)

This network service allows incoming and outgoing

calls to be restricted to a selected user group. You

may be a member of up to ten user groups.

For details on how to create, activate and use a

closed user group, contact your service provider.

If you select Automatic, you are connected to

the first available network when roaming.

If you select Manual, the phone scans for the

available networks. Go to Step 3.

Example: A company lends SIM cards to its

employees and wants to restrict outgoing

calls to members of the same team.

3. Press the

key until the preferred

network is highlighted and then press the OK

soft key.

If you select the Closed User Group menu, you

can enter the CUG function. You can now access the

following options after pressing the Select soft key.

You are connected to that network.

Index List: lets you list, add or delete CUG index

numbers. The list of current CUG indexes appears.

108

109

Network Services

Fun Box

The Fun Box menu contains several fun options.

Add a new CUG index as advised by your service

provider or delete a selected group.

To...

Then press the...

or key.

Games (Menu 7.1)

Scroll through the

existing CUG

indexes

You can enjoy two games with your phone.

Scroll to the required game, using the

keys and press the Select soft key. For further

details on the game, refer to the on-screen help.

and

Add a new CUG

index

Options soft key, select the

Add option and enter the

index.

For each game, the following options are available.

New Game: allows you to start a new game.

High Score: shows you the High Score table.

Delete a CUG

index

Options soft key and select

the Delete option.

Activate a CUG

index

Options soft key and select

the Activate option.

Key Info: shows you which keys do what within

the game.

Outside Access: lets you enable or disable calls to

numbers other than those nominated for the Closed

User Group. This feature depends on the nature of

your CUG subscription. Please check with your

service provider.

Continue: allows you to continue a previously

saved game. This option is only available when a

game has already been saved.

Press the…

While you are

Default Group: you may set a default CUG with

your service provider. If you have done so, you can

enable the Default Group option on your phone.

When making a call, you are given the option of

using your default CUG, instead of selecting one

from the list.

playing a game, to…

Pause or resume the

game

key.

Exit the game

Deactivate: deactivates the CUG function. This

menu appears only when the default group is

enabled or a CUG index is selected.

At the end of the game, if your score is ranked fifth

or higher, you can enter a name of up to ten

characters.

110

111

Fun Box

WAP Browser (Menu 7.2)

To...

Then...

Your phone is equipped with a WAP (Wireless

Application Protocol) Browser to allow you to access

and navigate the Wireless Web via your phone.

Change text entry Press the

key one or

key.

modes

more times.

Press the

Enter a space

Edit text

➀ Set the cursor to the right

of the character(s) to be

corrected.

Home (Menu 7.2.1)

This option allows you to connect the phone to the

network and load the homepage of the Wireless

Web service provider.

➀ Press the

required.

key as

➀ Enter the correct

character(s).

The content of the WAP Browser startup homepage

depends on your Wireless Web service provider. To

scroll through the screen, use the

and

keys.

Note: For further details about the text entry modes,

Note: To access the startup homepage from any other

screen in the WAP Browser, use the Home

option. For more information on the WAP

Browser menus, see page 113.

see page 42.

Exiting the WAP Browser

Navigating the WAP Browser

To exit the browser at any time, simply press

the

key.

To...

Then...

Scroll through and Press the

key until

Selecting and Using Browser Menu Options

select browser

items

the

symbol points to the

Various menu options are available when you are

using the WAP Browser to navigate the Wireless

Web.

required item or the item is

highlighted, and then press

the OK soft key to confirm

the selection.

To access a menu option, proceed as follows.

Select a numbered Press the corresponding

1. Press the

key.

item

numeric key.

A menu is displayed.

Return to the

Press the Back soft key or

the

key.

2. Highlight the required menu option by pressing

the

and

keys.

Return to the

Select the Home menu

startup homepage option; for more information

on this option, see page 113.

3. Select the option by pressing the ➀ soft key.

112

113

Fun Box

4. If necessary, select the secondary option using

opened. Select ON to display the prompt, or OFF

the

and

keys, and press the ➀ soft key to

not to display it.

confirm.

Circuit Linger: allows you to set how long the phone

waits before ending the attempt for connection

when there is no answer from the network. It is

Note: The menus may vary, depending on your

version of the WAP Browser.

preset to 60 sec

Scroll Mode: lets you select the scroll mode

between Block and Smooth

The following menu options are available.

Back: reloads the previous page in the history.

Scroll Speed: allows you to set the speed for

scrolling to the next screen. You can select Fast

Home: takes you back at any time to the

homepage of the Wireless Web service provider.

Medium or Slow

Exit: lets you exit the WAP Browser.

Key Press Timeout: allows you to set how long the

phone waits after you have pressed a key in the

text entry mode before moving the cursor to the

Mark Site: allows you to set a bookmark for most

pages so that you can access them directly from

any Web page.

right. You can select Fast Medium or Slow.

Security: displays all security-related information,

such as Connection Prompt, Secure Prompt,

Current Certificate and Encryption.

Bookmarks: allows you to load a bookmarked

Web page directly.

Inbox: displays all Web alerts.

Advanced: displays the current URL address and

restarts the browser without exiting it.

Save Image: allows you to save the displayed

image on the current page. You can see the saved

image in the Pictures menu option (Menu 7.3.3).

About: provides you with information about the

version of the Mobile Browser software and the WIM

(WAP Identity Module).

Reload: reloads the current page.

Settings: gives you access to the following setting

features.

Homepage: allows you to change the startup

homepage manually.

Proxy: allows you to change the proxy server

without ending the current WAP session.

Circuit Prompt: allows you to indicate whether you

wish to be informed each time a WAP session is

114

115

Fun Box

Favorite (Menu 7.2.2)

Settings (Menu 7.2.4)

This option allows you to store the URL addresses of

your favourite Web sites. You can access this menu

This option allows you to set up five proxy servers

for the WAP Browser. Contact your service provider

for details about the parameters to be declared.

directly by pressing and holding down the

while using the WAP Browser.

key

For each server, the following parameters are

available.

To store a URL address, proceed as follows.

1. Select an empty location and press the Options

Parameter

Description

soft key.

Profile

Name

Name that you wish to assign to

the HTTP proxy server.

2. Enter the address and press the Enter soft key.

Homepage

URL

Address of your startup homepage.

When the default homepage is

displayed, you can delete it using

3. Enter a name for your favourite Web site and

press the OK soft key.

After saving your favourites, you can use the

the

key and enter your own

following options by pressing the Options soft key.

choice.

Security

Data transmission mode. Choose

Secure to protect your data

against unauthorised access;

Goto URL: quickly accesses the site.

Edit: edits the selected address.

otherwise, choose Non-Secure

Delete: deletes the selected address.

IP Address

Bearer

WAP gateway address required to

connect to the Internet.

http:// (Menu 7.2.3)

Bearer to be used for each type of

network address accessed: GPRS

This option allows you to manually enter the URL

address of the Web site that you wish to access. You

can access this menu directly by pressing and

or Data

holding down the

key in the WAP Browser.

The remaining options depend on the Bearer

For further details about the text entry modes, see

page 42.

setting, as indicated below.

When the bearer is set to Data

Parameter

Description

Name

PPP server login ID.

Password

PPP server password.

116

117

Fun Box

Downloads (Menu 7.3)

Parameter

Description

Dial-up

Number

PPP server phone number.

You can download MIDlets (Java applications

running on mobile phones) from various sources

using the WAP Browser and store them in your

phone. You can then view the list of MIDlets stored

on the Games & More screen.

Data Call

Type

Analogue or ISDN.

When the bearer is set to GPRS

Note: Java services may be unavailable, depending

on the service provider.

Parameter

User Name

Description

Games & More (Menu 7.3.1)

User ID required to connect to the

GPRS network.

This menu option allows you to launch a MIDlet and

access various menu options.

Password

APN

Password required to connect to

the GPRS network.

Launching a MIDlet

Access point name used for the

address of the GPRS network

gateway.

To launch a MIDlet, proceed as follows.

1. From the Downloads screen, select the Games

& More option.

Note: The WAP Browser settings may vary,

depending on the service provider. Contact

your service provider for more information.

2. Scroll to the required MIDlet and press the

Launch soft key.

Clear Cache (Menu 7.2.5)

Using the Menus

You can clear the information stored in the cache

(the phone’s temporary memory used to store the

most recently accessed Web pages).

From the Main Screen press the Menu soft key to

access the following options.

Info^*: displays information about the selected

MIDlet, such as the file size, application version,

vendor and the location of the jad file, which is the

MIDlet description file.

Press the Yes soft key to confirm the deletion.

Otherwise, press the No soft key.

Remove : removes the selected MIDlet. When the

confirmation message appears, press the Remove

soft key. To cancel your selection, press the Cancel

soft key.

* Shown only when a MIDlet has been downloaded.

118

119

Fun Box

Solving Problems

Entering Text

Before contacting the after-sales service, perform

the following simple checks. They may save you the

time and expense of an unnecessary service call.

When you are prompted to enter text, the current

text entry mode is indicated on the screen. For

further details about the text entry modes, see

page 42.

When you switch your phone on, the

following messages may appear

Sounds (Menu 7.3.2)

In this menu, you can view the list of sounds

downloaded from the server. You can set the

downloaded sounds as the current ring tone, but

cannot send the sounds to other phones.

Insert SIM Card

• Check that the SIM card is correctly installed.

Phone Locked Enter Password

When the memory is full, a warning message is

displayed and the phone rejects additional sounds

until you erase obsolete ones.

• The automatic locking function has been enabled.

You must enter the phone’s password before you

can use the phone.

Enter PIN

Pictures (Menu 7.3.3)

• You are using your phone for the first time. You

must enter the Personal Identification Number

supplied with the SIM card.

In this menu, you can view the list of pictures

downloaded from the server. You can set the

downloaded pictures as the current background

image, but cannot send them to other phones.

• The PIN Check feature is enabled. Each time the

phone is switched on, the PIN must be entered.

To disable this feature, use the PIN Check menu

option (Menu 4.6.1).

When the memory is full, a warning message is

displayed and the phone rejects additional pictures

until you erase obsolete ones.

Enter PUK

DNS Setting (Menu 7.3.4)

• The PIN code was entered incorrectly three times

in succession and the phone is now blocked.

Enter the PUK supplied by your network operator.

The DNS (Domain Name Server) address of the

Java server is factory-set, but sometimes you may

need to change it. In this menu, you can enter the

required DNS address.

120

121

Solving Problems

“No service”, “Network failure” or “Not

done” is displayed

The phone starts beeping and

“**Warning** Low Battery” flashes in

the display

• The network connection was lost. You may be in a

weak signal area (in a tunnel or surrounded by

buildings). Move and try again.

• The battery is insufficiently charged. Replace the

battery and/or recharge it.

• You are trying to access an option for which you

have not taken out a subscription with your

service provider. Contact the service provider for

further details.

The audio quality of the call is poor

• Check the signal strength indicator in the display

(

); the number of bars indicates the signal

strength from strong ( ) to weak ( ).

You have entered a number but it was

not dialled

• Try moving the phone slightly or moving closer to

a window if you are in a building.

• Have you pressed the

key?

No number is dialled when you recall a

phonebook entry

• Are you accessing the right cellular network?

• You may have set an outgoing call barring option.

• Check that the number has been stored correctly,

by using the Phonebook Search feature.

Your correspondent cannot reach you

• Re-store the number, if necessary.

• Is your phone switched on (the

for more than one second)?

key pressed

• Are you accessing the right cellular network?

• You may have set an incoming call barring option.

If the above guidelines do not help you to solve

the problem, take a note of:

Your correspondent cannot hear you

speaking

• The model and serial numbers of your phone

• Your warranty details

• A clear description of the problem

• Have you switched off the microphone?

Then contact your local dealer or Samsung after-

sales service.

• Are you holding the phone close enough to your

mouth? The microphone is located at the bottom

of the phone.

122

123

Access Codes

There are several access codes that are used by

your phone and its SIM card. These codes help you

protect the phone against unauthorised use.

The Personal Identification Number or PIN

(4 to 8 digits) protects your SIM card against

unauthorised use. It is usually supplied with

the SIM card.

When requested for any of the codes explained

below, key in the appropriate code (displayed as

asterisks) and press the OK soft key. If you make a

If you enter an incorrect PIN three times in

succession, the code is disabled and cannot be

used until you re-enable it by entering the PUK

(see below).

mistake, press the

key one or more times until

the incorrect digit is cleared and then continue

entering the correct code.

The access codes, except for the PUK and PUK2

codes can be changed using the Security menu

options (Menu 4.6). See page 86 for further

details.

To...

Refer to...

Activate/deactivate the

PIN Check feature

Page 87

(Menu 4.6.1).

Change the PIN

Page 87

(Menu 4.6.2).

Important! Avoid using access codes resembling

emergency numbers, such as 112, so

that you do not dial an emergency

number accidentally.

PUK

Phone Password

The 8-digit PUK (PIN Unblocking Key) is required to

change a disabled PIN. The PUK may be supplied

with the SIM card. If not, or you have lost it,

contact your service provider.

The Phone Lock feature uses the phone password to

protect your phone against unauthorised use. The

phone password is supplied with the phone and is

factory set to 00000000.

To re-enable your PIN, proceed as follows.

1. Key in the PUK and press the OK soft key.

To...

Refer to...

2. Enter a new PIN of your choice and press the OK

Activate/deactivate the

Phone Lock feature

Page 87

(Menu 4.6.3).

soft key.

3. When the Confirm New PIN message is

displayed, key in the same code again and press

the OK soft key.

Change the phone

password

Page 88

(Menu 4.6.4).

If you enter an incorrect PUK ten times in

succession, the SIM card becomes invalid.

Contact your service provider for a new card.

124

125

Access Codes

PIN2

Barring Password

The PIN2 (4 to 8 digits), supplied with some SIM

cards, is required to access specific functions, such

as setting the maximum cost of a call. These

functions are available if supported by your SIM

card.

The 4-digit barring password is required when you

use the Call Barring function. You obtain the

password from your service provider when you

subscribe to this function. You can change this

password in the Call Barring menu option

(Menu 6.2). See page 106 for further details.

If you enter an incorrect PIN2 three times in

succession, the code is disabled and you cannot

access the functions until you re-enable it by

entering the PUK2.

To change the PIN2, refer to page 89

(Menu 4.6.7).

PUK2

The 8-digit PUK2 (PIN Unblocking Key 2), supplied

with some SIM cards, is required to change a

disabled PIN2. If you lose the code, contact your

service provider.

To re-enable your PIN2, proceed as follows.

1. Key in the PUK2 and press the OK soft key.

2. Enter a new PIN2 of your choice and press the

OK soft key.

3. When the Confirm PIN2 message is displayed,

key in the same code again and press the OK

soft key.

If you enter an incorrect PUK2 ten times in

succession, you will not be able to access the

functions requiring the PIN2. Contact your service

provider for a new card.

126

127

Health and Safety Information

Health and Safety

Information

Exposure to Radio-Frequency

Energy (SAR Information)

This phone meets European Union (EU) require-

ments concerning exposure to radio waves.

SAR tests are conducted using standard operating

positions with the phone transmitting at its highest

certified power level in all tested frequency bands.

Although the SAR is determined at the highest

certified power level, the actual SAR level of the

phone while operating can be well below the

maximum value. This is because the phone is

designed to operate at multiple power levels so as

to use only the power required to reach the

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured, so as not

to exceed the limits for exposure to radio-frequency

(RF) energy, as recommended by the EU Council.

These limits are part of comprehensive guidelines

and establish permitted levels of RF energy for the

general population. The guidelines were developed

by independent scientific organisations through

periodic and thorough evaluation of scientific

studies. The limits include a substantial safety

margin designed to ensure the safety of all persons,

regardless of age and health.

network. In general, the closer you are to a base

station, the lower the power output of the phone.

The highest SAR value for this model phone when

tested for compliance against the standard was

0.599 W/kg. While there may be differences

between the SAR levels of various phones and

various positions, they all meet the EU

The exposure standard for mobile phones employs

a unit of measurement known as SAR (Specific

Absorption Rate). The SAR limit recommended by

requirements for RF exposure.

the EU Council is 2.0 W/kg.

* The SAR limit for mobile phones used by the public is

2.0 watts/kilogram (W/kg) averaged over ten grams of body

tissue. The limit incorporates a substantial margin of safety

to give additional protection for the public and to account for

any variations in measurements. The SAR values may vary

depending on national reporting requirements and the

network band.

128

129

Health and Safety Information

Precautions When Using Batteries

• Do not leave the battery in hot or cold places,

such as in a car in summer or winter conditions,

as you will reduce the capacity and life-time of

the battery. Always try to keep the battery at

room temperature. A phone with a hot or cold

battery may temporarily not work, even when the

battery is fully charged. Li-ion batteries are

particularly affected by temperatures below 0 °C

(32 °F).

Your phone is powered by a rechargeable Li-ion

standard battery.

• Never use any charger or battery that is damaged

in any way.

• Use the battery only for its intended purpose.

• If you use the phone near the network’s base

station, it uses less power; talk and standby

times are greatly affected by the signal strength

on the cellular network and the parameters set by

the network operator.

• Do not short-circuit the battery. Accidental short

circuiting can occur when a metallic object (coin,

clip or pen) causes a direct connection between

the + and – terminals of the battery (metal strips

on the back of the battery), for example when

you carry a spare battery in a pocket or bag.

Short-circuiting the terminals may damage the

battery or the object causing the short-circuit.

• Battery charging times depend on the remaining

battery charge and the type of battery and

charger used. The battery can be charged and

discharged hundreds of times, but it will

gradually wear out. When the operation time

(talk time and standby time) is noticeably shorter

than normal, it is time to buy a new battery.

• Dispose of used batteries in accordance with local

regulations. Always recycle. Do not dispose of

batteries in a fire.

• If left unused, a fully charged battery will

discharge itself over time.

• Use only Samsung-approved batteries and

recharge your battery only with Samsung-

approved chargers. When a charger is not in use,

disconnect it from the power source. Do not leave

the battery connected to a charger for more than

a week, since overcharging may shorten its life.

• Extreme temperatures will affect the charging

capacity of your battery: it may require cooling or

warming first.

130

131

Health and Safety Information

Road Safety

6. Dial sensibly and assess the traffic; if possible,

place calls when you are not moving or before

pulling into traffic. Try to plan calls when your

car will be stationary. If you need to make a call

while moving, dial only a few numbers, check

the road and your mirrors, then continue.

Your wireless phone gives you the powerful ability

to communicate by voice, almost anywhere,

anytime. But an important responsibility

accompanies the benefits of wireless phones, one

that every user must uphold.

When driving a car, driving is your first

responsibility. When using your wireless phone

behind the wheel of a car, practice good common

sense and remember the following tips.

7. Do not engage in stressful or emotional conver-

sations that may be distracting. Make the

people with whom you are talking aware that

you are driving and suspend conversations that

have the potential to divert your attention from

the road.

1. Get to know your wireless phone and its

features, such as speed dial and redial. If

available, these features help you to place your

call without taking your attention off the road.

8. Use your wireless phone to call for help. Dial the

emergency number in the case of fire, traffic

accident or medical emergencies. Remember, it

is a free call on your wireless phone!

2. When available, use a hands-free device. If

possible, add an extra layer of convenience and

safety to your wireless phone with one of the

many hands-free accessories available today.

9. Use your wireless phone to help others in

emergencies. If you see a car accident, crime in

progress or other serious emergency where

lives are in danger, call the emergency number,

as you would want others to do for you.

3. Position your wireless phone within easy reach.

Be able to access your wireless phone without

removing your eyes from the road. If you get an

incoming call at an inconvenient time, let your

voice mail answer it for you.

10. Call roadside assistance or a special non-

emergency wireless assistance number when

necessary. If you see a broken-down vehicle

posing no serious hazard, a broken traffic

signal, a minor traffic accident where no one

appears injured, or a vehicle you know to be

stolen, call roadside assistance or any other

special non-emergency wireless number.

4. Let the person you are speaking with know you

are driving; if necessary, suspend the call in

heavy traffic or hazardous weather conditions.

Rain, sleet, snow, ice and even heavy traffic can

be hazardous.

5. Do not take notes or look up phone numbers

while driving. Jotting down a To Do List or

flipping through your phonebook takes your

attention away from your primary responsibility,

driving safely.

132

133

Health and Safety Information

Operating Environment

Persons with pacemakers:

Remember to follow any special regulations in force

in any area and always switch off your phone

whenever it is forbidden to use it, or when it may

cause interference or danger.

• Should always keep the phone more than 15 cm

(6 inches) from their pacemaker when the phone

is switched on

When connecting the phone or any accessory to

another device, read its user’s guide for detailed

safety instructions. Do not connect incompatible

products.

• Should not carry the phone in a breast pocket

• Should use the ear opposite the pacemaker to

minimise potential interference

As with other mobile radio transmitting equipment,

users are advised that for the satisfactory operation

of the equipment and for the safety of personnel, it

is recommended that the equipment should only be

used in the normal operating position (held to your

ear with the antenna pointing over your shoulder).

If you have any reason to suspect that interference

is taking place, switch off your phone immediately.

Hearing Aids

Some digital wireless phones may interfere with

some hearing aids. In the event of such inter-

ference, you may wish to consult your hearing aid

manufacturer to discuss alternatives.

Electronic Devices

Most modern electronic equipment is shielded from

radio frequency (RF) signals. However, certain

electronic equipment may not be shielded against

the RF signals from your wireless phone. Consult

the manufacturer to discuss alternatives.

Other Medical Devices

If you use any other personal medical devices,

consult the manufacturer of your device to

determine if it is adequately shielded from external

RF energy. Your physician may be able to assist you

in obtaining this information. Switch off your phone

in health care facilities when any regulations posted

in these areas instruct you to do so. Hospitals or

health care facilities may be using equipment that

could be sensitive to external RF energy.

Pacemakers

Pacemaker manufacturers recommend that a

minimum distance of 15 cm (6 inches) be

maintained between a wireless phone and a

pacemaker to avoid potential interference with the

pacemaker. These recommendations are consistent

with the independent research and recommen-

dations of Wireless Technology Research.

134

135

Health and Safety Information

Vehicles

Emergency Calls

RF signals may affect improperly installed or

inadequately shielded electronic systems in motor

vehicles. Check with the manufacturer or its

representative regarding your vehicle.

This phone, like any wireless phone, operates using

radio signals, wireless and landline networks as well

as user-programmed functions, which cannot

guarantee connection in all conditions. Therefore,

you should never rely solely on any wireless phone

for essential communications (medical emer-

gencies, for example).

You should also consult the manufacturer of any

equipment that has been added to your vehicle.

Posted Facilities

Remember that to make or receive any calls, the

phone must be switched on and in a service area

with adequate signal strength. Emergency calls

may not be possible on all wireless phone networks

or when certain network services and/or phone

features are in use. Check with local service

providers.

Switch off your phone in any facility where posted

notices require you to do so.

Potentially Explosive Atmospheres

Switch off your phone when in any area with a

potentially explosive atmosphere and obey all signs

and instructions. Sparks in such areas could cause

an explosion or fire resulting in bodily injury or even

death.

To make an emergency call, proceed as follows.

1. If the phone is not on, switch it on.

2. Key in the emergency number for your present

location (for example, 112 or any other official

emergency number). Emergency numbers vary

by location.

Users are advised to switch off the phone while at a

refuelling point (service station). Users are

reminded of the need to observe restrictions on the

use of radio equipment in fuel depots (fuel storage

and distribution areas), chemical plants or where

blasting operations are in progress.

3. Press the

key.

If certain features are in use (call barring, for

example), you may first need to deactivate those

features before you can make an emergency call.

Consult this document and your local cellular

service provider.

Areas with a potentially explosive atmosphere are

often but not always clearly marked. They include

below deck on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum gas

(such as propane or butane), areas where the air

contains chemicals or particles, such as grain, dust

or metal powders, and any other area where you

would normally be advised to turn off your vehicle

engine.

When making an emergency call, remember to give

all the necessary information as accurately as

possible. Remember that your phone may be the

only means of communication at the scene of an

accident; do not cut off the call until given

permission to do so.

136

137

Health and Safety Information

Other Important Safety Information

Care and Maintenance

• Only qualified personnel should service the phone

or install the phone in a vehicle. Faulty

installation or service may be dangerous and may

invalidate any warranty applicable to the device.

Your phone is a product of superior design and

craftsmanship and should be treated with care. The

suggestions below will help you fulfill any warranty

obligations and allow you to enjoy this product for

many years.

• Check regularly that all wireless phone

equipment in your vehicle is mounted and

operating properly.

• Keep the phone and all its parts and accessories

out of the reach of small children.

• Do not store or carry flammable liquids, gases or

explosive materials in the same compartment as

the phone, its parts or accessories.

• Keep the phone dry. Precipitation, humidity and

liquids contain minerals that will corrode

electronic circuits.

• For vehicles equipped with an air bag, remember

that an air bag inflates with great force. Do not

place objects, including both installed or portable

wireless equipment in the area over the air bag or

in the air bag deployment area. If wireless

equipment is improperly installed and the air bag

inflates, serious injury could result.

• Do not touch the phone with wet hands while it is

charging. Doing so may give you an electric

shock or damage the phone.

• Do not use or store the phone in dusty, dirty

areas, as its moving parts may be damaged.

• Do not store the phone in hot areas. High

temperatures can shorten the life of electronic

devices, damage batteries, and warp or melt

certain plastics.

• Switch off your phone before boarding an aircraft.

The use of wireless phones in aircraft may be

dangerous to the operation of the aircraft, and is

illegal.

• Do not store the phone in cold areas. When the

phone warms up to its normal operating

temperature, moisture can form inside the

phone, which may damage the phone’s electronic

circuit boards.

• Failure to observe these instructions may lead to

the suspension or denial of telephone services to

the offender, or legal action, or both.

• Do not drop, knock or shake the phone. Rough

handling can break internal circuit boards.

• Do not use harsh chemicals, cleaning solvents or

strong detergents to clean the phone. Wipe it

with a soft cloth slightly dampened in a mild

soap-and-water solution.

138

139

Health and Safety Information

Glossary

To help you understand the main technical terms

and abbreviations used in this booklet and take full

advantage of the features on your mobile phone,

here are a few definitions.

• Do not paint the phone. Paint can clog the

device’s moving parts and prevent proper

operation.

• Do not put the phone in or on heating devices,

such as a microwave oven, a stove or a radiator.

The phone may explode when overheated.

Call Barring

Ability to restrict outgoing and incoming calls.

• Use only the supplied or an approved replace-

ment antenna. Unauthorised antennas or

modified accessories may damage the phone and

violate regulations governing radio devices.

Call Diverting

Ability to reroute calls to another number.

• If the phone, battery, charger or any accessory is

not working properly, take it to your nearest

qualified service facility. The personnel there will

assist you, and if necessary, arrange for service.

Call Holding

Ability to put one call on standby while answering or

making another call; you can then switch between

the two calls, as required.

Call Waiting

Ability to inform users that they have an incoming

call when engaged on another call.

Dual Band

Ability to operate with both DCS (1800 MHz) and

GSM (900 MHz) networks. The phone automatically

uses the network with strongest signal and even

switches networks during a call within the same

operator’s network.

GPRS (General Packet Radio Service)

New non-voice value-added service that allows

information to be sent and received across a mobile

telephone network. GPRS guarantees continuous

connection to the Internet for mobile phone and

computer users. It is based on the Global System

for Mobile Communication (GSM), circuit-switched

cellular phone connections and the Short Message

Service (SMS).

140

141

Glossary

GSM (Global System for Mobile

Communication)

PIN (Personal Identification Number)

Security code that protects the phone/SIM against

unauthorised use. The PIN is supplied by the

service provider with the SIM card. It may be a four

to eight-digit number and can be changed, as

required.

International standard for cellular communication,

guaranteeing compatibility between the various

network operators. GSM covers most European

countries and many other parts of the world.

PUK (PIN Unblocking Key)

Java

Security code used to unlock the phone when an

incorrect PIN has been entered three times in

succession. The eight-digit number is supplied by

the service provider with the SIM card.

Programming language generating applications that

can run on all hardware platforms, whether small,

medium or large, without modification. It has been

promoted for and geared heavily to the Web, both

for public Web sites and Intranets. When a Java

program runs from a Web page, it is called a Java

applet. When it is run on a mobile phone or pager, it

is called a MIDlet.

Roaming

Use of your phone when you are outside your home

area (when travelling for example).

Line Identification Services (Caller ID)

SDN (Service Dialling Numbers)

Services allowing subscribers to view or block the

telephone numbers of callers.

Telephone numbers supplied by your network

provider and giving access to special services, such

as voice mail, directory inquiries, customer support

and emergency services.

Multiparty Calling

Ability to establish a conference call involving up to

five additional parties.

SIM (Subscriber Identification Module)

Card containing a chip with all the information

required to operate the phone (network and

memory information, as well as the subscriber’s

personal data). The SIM card fits into a small slot

on the back of the phone and is protected by the

battery.

Phone Password

Security code used to unlock the phone when you

have selected the option to lock it automatically

each time it switches on.

142

143

Glossary

SMS (Short Message Service)

Network service sending and receiving messages to

and from another subscriber without having to

speak to the correspondent. The message created

or received can be displayed, received, edited or

sent.

Soft Keys

Two keys marke

and

on the phone, the

purpose of which:

• Varies according to the function that you are

currently using

• Is indicated on the bottom line of the display just

above the corresponding key

Voice Mail

Computerised answering service that automatically

answers your calls when you are not available,

plays a greeting (optionally in your own voice) and

records a message.

144

Index

dialled (2.3) 75

diverting (6.1) 103

emergency 137

ending 23

Access codes 124

Accessories

Alarm (5.4) 100

Alert Type (3.3) 79

Animations 66

Answering

holding 48

international 22

making 22

missed (2.1) 26

a call 25

multiparty 52

a second call 52

Anykey Answer 91

Auto Key Lock (4.2.3) 85

Auto Redial 91

received (2.2) 74

records (2) 74

redialling 23

automatically 91

rejecting 25

Autopower 100

speed-dialling 38

time (2.5) 76

via phonebook 35

waiting (6.3) 107

Card

Background image 84

Backlight 15

brightness 90

Barring

calls (6.2) 105

password 106

Battery

charging 18

installing the SIM 16

Care 139

Changing

127

barring password 106

password (4.6.4) 88

PIN (4.6.2) 87

PIN2 (4.6.7) 89

text entry modes 43

low battery indicator 19

precautions 130

Brightness (4.7.1) 90

Broadcast (1.10) 72

Browser

Characters

changing mode 43

entering 42

WAP (7.2) 112

Charging batteries 18

Closed User Group (6.6) 109

Conference call 52

Connect

to voice server 71

tone 82

Copying

Calculator (5.5) 101

Calendar (5.1) 93

Caller

groups 35 36, 37

ID (6.5) 109

memos 95

phonebook numbers 34

tasks 98

Calls

answering

a call 25

a second call 52

barring (6.2) 105

cost (2.6) 76

Correcting numbers 22

Cost of calls (2.6) 76

CUG 109

Currency Exchange (5.6)

102

145

Index

tone (3.5) 80

voice mail (1.9) 71

write new (1.3) 65

Microphone mute 49

Minute Minder 82

Date setting (5.3.2) 99

Deleting

Games (7.1) 111

Graphic Logo (4.7.4) 91

Greeting Message (4.3) 85

Groups

Language (4.5) 86

Last number redial 23

Length of calls 76

Letters

call records 27

memos 93 95

messages 63 64

Missed Calls (2.1) 26

Morning Call 100

Multiparty calls

dropping 54

making 52

private conversation 53

Muting

key tones 50

microphone 49

My Objects (1.7) 70

My Settings (4.2) 84

caller 35

changing mode 43

entering 42

missed calls 27

user 109

phonebook

Light

backlight 15

service 15 90

Locking

keys 21

numbers 34

tasks 98

Dialled calls (2.3) 75

Display 13

Health information 128

Hearing aids 135

Holding calls 48

brightness 90

icons 14

language (4.5) 86

settings (4.7) 90

phone (4.6.3) 87

SIM card (4.6.5) 88

Logo

graphic (4.7.4) 91

Low battery indicator 19

Lower-case characters

entering 46

Diverting calls (6.1) 103

Downloads (7.3) 119

DTMF tones

Icons 14

Identifying callers 35 36,

37,

109

Names

sending 50

Images

entering 42

searching/dialling 35

storing 31

background 84

messages 66 70

Inbox (1.1) 62

Maintenance 139

Medical devices 135

Melodies 66

Memory status

Network Selection (6.4) 108

Network Services (6) 103

Numbers

Earpiece volume 24

Editing

Incoming text messages 62

Infrared Activate (4.1) 83

Internet 112

70, 78

caller groups 37

memos 95

adding phonebook 35

copying

phonebook 34

correcting 22

deleting 34

editing phonebook 34

fixed dial 89

mode 47

own 86

pasting phonebook 34

redialling 23

searching/dialling 35

storing 31

voice server 71

IrDA port 83

message (1.8) 71

phonebook 41

messages 62

missed calls 27

Memos

phonebook

copying 95

deleting 93

editing 95

writing 94

numbers 34

tasks 97

Key tones

adjusting volume 24

muting 50

selecting (3.4) 79

sending 50

Electronic devices 134

Emergency calls 137

Error tone 82

Explosive atmospheres 136

Extra Settings (4.8) 91

Extra Tones (3.7) 82

Menus

list 56

Keypad Tone (3.4) 79

Keys

scrolling 55

shortcuts 56

style 84

auto lock 85

description 11

location 10

locking 21 85

shortcut 92

soft 29

Messages 62

broadcast (1.10) 72

deleting (1.6) 69

greeting (4.3) 85

inbox (1.1) 62

memory status (1.8) 71

objects 70

outbox (1.2) 63

settings (1.5) 68

templates (1.4) 67

FDN mode (4.6.6) 89

Fixed Dial Number mode 89

Fun Box (7) 111

Functions

Objects

message 66 70

Operator logo 91

Options

selecting 29

146

147

Index

Organiser (5) 93

sound (3) 78

time (5.3.1) 99

Shortcut (4.9) 92

Silent mode 28

SIM card

ring (3.1) 78

Outbox (1.2) 63

Travel adapter 18

Radio-frequencies 128

Reading text messages 62

Received Calls (2.2) 74

Redialling

automatically 91

last number 23

Rejecting calls 25

Reset Settings (4.10) 92

Ring

Outgoing text messages 63

Own Number (4.4) 86

installing 16

locking 88

Unlocking keypad 21

Upper-case characters

entering 46

Pacemakers 134

Password

SMS

message icon 62

setup 68

User groups 109

barring 127

changing 106

phone 124

using 51 62

tone (3.1) 78

Soft keys 29

type (3.3) 79

changing 88

Pasting phonebook numbers

Solving problems 121

Sound Settings (3) 78

Sounds

downloading 120

messages 66

Speed-dialling 38

Switching on/off

microphone 49

phone 20

Vibration 28, 79

volume (3.2) 78

Road safety 132

Roaming 108

Voice Mail (1.9) 71

Voice server 71

Volume

Phone

lock (4.6.3) 87

password 124

settings (4) 83

Phonebook 31

adding entries 35

adjusting 24

selecting the ring 78

Safety

batteries 130

explosive atmospheres

136

information 128 138

operating environment

134

caller groups 35

36,

silent mode 28

tone 81

Symbol mode 47

Waiting

calls 52

Wallpaper 84

copying 34

107

deleting 34

editing 34

WAP Browser (7.2) 112

World Time (5.3.3) 99

Write New (1.3) 65

Writing

memory status 41

options 34

pasting 34

searching/dialling 35

speed-dialling 38

storing numbers/names

precautions

road 132

T9 mode 44

Tasks

defining 96

editing 97

Templates (1.4) 67

Text

changing mode 43

entering 42

Time

call (2.5) 76

format (5.3.4) 99

setting (5.3.1) 99

world (5.3.3) 99

Time & Date (5.3) 99

To Do List (5.2) 96

Tone

Schedule 93

memos 94

text messages 65

Searching in phonebook 35

Security (4.6) 86

Selecting functions/options

Pictures

Sending

background 84

DTMF tones 50

key tones 50

downloading 120

messages 66

messages 65

PIN 125

Service light 15 90

Settings (1.5) 68

changing 87

checking 87

alarm (5.4) 100

colours 90

date (5.3.2) 99

display (4.7) 90

extra (4.8) 91

language (4.5) 86

phone (4) 83

PIN2 126

changing 89

Power On/Off (3.6) 81

Problem solving 121

PUK 125

connect 82

error 82

extra (3.7) 82

keypad (3.4) 79

message (3.5) 80

minute minder 82

power on/off (3.6) 81

PUK2 126

reset (4.10) 92

security (4.6) 86

148

149

150

151

152

ZTE Cell Phones Cell Phone D90 User Manual
Xerox 400400 User Manual
West Bend Large Capacity Coffeemakers 33600 User Manual
Toshiba MK4018GAS (HDD2170) User Manual
Snapper 1692467 User Manual
SanDisk xD User Manual
SanDisk Cruzer Professional User Manual
Roberts Radio STREAMTime User Manual
Philips AX 5019 User Manual
Nokia E61 User Manual