SGH-A727
P O R T A B L E Q u a d - B A N D
M O B I L E
P H O N E
User Guide
Please read this manual before operating your
phone, and keep it for future reference.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
A727_UCGD6_ATT_WB_050807_F3
Table of Contents
Section 1: Getting Started ..........................................................................5
SIM Card Information ................................................................................................5
Installing the microSD Card .......................................................................................8
Turning the Phone On or Off ......................................................................................9
Setting Up Your Voice Mail ........................................................................................9
Features of Your Phone ...........................................................................................11
Front View of Your Phone ........................................................................................12
Internal Display Layout ...........................................................................................14
Selecting Functions and Options .............................................................................17
Command Keys ......................................................................................................17
Section 3: Call Functions .........................................................................20
Making a Call ..........................................................................................................20
Answering a Call .....................................................................................................22
Holding Your Phone ................................................................................................22
Video Share Call .....................................................................................................23
Play a Video Share Recording .................................................................................24
Recent Calls ...........................................................................................................24
Call Time ................................................................................................................26
Data Volume ...........................................................................................................26
Data Call Time ........................................................................................................27
Silent Mode ............................................................................................................27
Options During a Call ..............................................................................................27
Section 4: Entering Text ..........................................................................32
Changing the Text Input Method .............................................................................32
Using the T9 Input Method ......................................................................................33
Using the Alphabet Input Method ............................................................................34
Using the Symbols Input Method .............................................................................35
Using the Numeric Input Method .............................................................................36
Menu Navigation .....................................................................................................37
Menu Outline ..........................................................................................................38
Using Contacts List .................................................................................................50
Address Book Entry Options ....................................................................................51
Adding a New Contact ............................................................................................52
Speed Dial ..............................................................................................................55
Finding My Own Phone Number ..............................................................................57
FDN Mode ..............................................................................................................57
Group Settings ........................................................................................................58
1
Section 7: Messaging ............................................................................. 61
Types of Messages .................................................................................................61
Creating and Sending New Messages .....................................................................61
Using Message Templates ......................................................................................70
Deleting Messages .................................................................................................70
Messaging Settings ................................................................................................71
Memory Status .......................................................................................................74
Sound Settings .......................................................................................................76
Call Settings ...........................................................................................................82
Software Update .....................................................................................................90
Application Settings ................................................................................................91
Section 9: AT&T Mall ............................................................................... 97
Shopping for Audio .................................................................................................97
Shopping for Games ...............................................................................................98
Shopping for Applications .......................................................................................99
Section 11: Cellular Video ..................................................................... 114
Table of Contents
2
Cellular Video Options ...........................................................................................115
Media Clip Options ................................................................................................116
Using the Video Categories ...................................................................................117
Customizing Cellular Video ....................................................................................118
My Purchases .......................................................................................................119
Parental Controls ..................................................................................................119
Shop Applications .................................................................................................122
Using the Camera .................................................................................................122
Using the Camcorder ............................................................................................126
Media Player .........................................................................................................129
Record Audio ........................................................................................................130
Alarms ..................................................................................................................131
Calendar ...............................................................................................................133
Appointment .........................................................................................................133
Tasks ...................................................................................................................136
Note .....................................................................................................................137
Calculator .............................................................................................................137
Tip Calculator .......................................................................................................137
Converter ..............................................................................................................138
World Time ...........................................................................................................138
Timer ....................................................................................................................138
Stopwatch ............................................................................................................139
Accessing the MEdia Net Homepage .....................................................................140
Accessing the MEdia Net Site ...............................................................................143
Navigating with the WAP Browser .........................................................................143
Using Favorites .....................................................................................................145
Downloading Multimedia Files ..............................................................................146
Using your History .................................................................................................147
Clearing the Cache ...............................................................................................147
Clearing the Cookies .............................................................................................147
Changing the WAP Profiles ....................................................................................148
Section 14: Accessibility ........................................................................150
Health and Safety Information ...............................................................................151
Samsung Mobile Products and Recycling ..............................................................153
UL Certified Travel Adapter ...................................................................................153
Consumer Information on Wireless Phones ...........................................................154
Road Safety ..........................................................................................................160
Responsible Listening ...........................................................................................162
Operating Environment .........................................................................................164
Using Your Phone Near Other Electronic Devices ...................................................164
Potentially Explosive Environments .......................................................................165
3
Other Important Safety Information .......................................................................167
Product Performance ............................................................................................167
Availability of Various Features/Ring Tones ...........................................................168
Battery Standby and Talk Time .............................................................................169
Standard Limited Warranty ...................................................................................172
Table of Contents
4
Section 1: Getting Started
Topics Covered
•
•
•
This section describes the first steps to operating your phone.
SIM Card Information
When you subscribe for 3G cellular network services, you receive a plug-in USIM
(Universal Subscriber Identity Module) card loaded with your subscription details,
such as your PIN, and available optional services.
Install and charge the phone
1. If necessary, power-off the phone by holding down the
key until the
power-off image displays.
2. Slide the battery cover away, as shown.
5
SIM Card Information
Inserting and Removing the SIM card
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use
caution when inserting or removing the card and keep all SIM cards out of reach of children.
ᮣ
Make sure the gold contacts of the card are face down, then slide the SIM
card into the socket.
Installing the Battery
1. Align the battery tabs with the slots at the bottom of the phone.
2. Press the battery down until it clicks into place. Make sure that the battery
is properly installed before switching on the phone.
3. With the battery in position on the phone, place the cover back on the
handset and slide it in until it clicks.
Getting Started
6
Charging a Battery
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to
charge the battery, and use only Samsung approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your
warranty.
1. Plug the connector of the travel adaptor into the jack on the side of the
phone.
2. Plug the adaptor into a standard AC wall outlet.
Note: The following illustration is the correct and incorrect method for connecting the charger. If attempted,
damage to the accessory port will occur therefore voiding the phone’s warranty.
3. When the phone is completely charged (the battery icon becomes still),
unplug the adapter from the power outlet.
7
Installing the microSD Card
4. Remove the adapter from the phone by gently pulling the connector out.
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid
damage.
Installing the microSD Card
To add additional memory to your phone you can insert a microSD card into the side
of the phone. Use the following instructions and illustrations for proper insertion and
removal.
1. Open the side slot to insert the card. Place the microSD card into the slot.
2. Push the microSD card into the slot until it clicks into place.
Warning!: Please note the proper side is facing down when inserting the card.
3. To remove the card, a quick press to release the card from the slot.
Getting Started
8
Low Battery Indicator
When the battery is weak and only a few minutes of talk time remain, a warning tone
sounds, the “Low Battery” message repeats at regular intervals on the display, and
the empty battery icon
blinks. The backlight turns off to conserve the
remaining battery power.
If the battery level becomes too low, the phone automatically turns off. Recharge
your battery.
Turning the Phone On or Off
1. Press and hold the
key until the phone power-on screen displays.
Note: Do not turn on the phone when mobile phone use is prohibited.
2. If the phone asks you to enter a password, enter a password and press the
Confirm soft key or the
The phone searches for your network and after finding it, the Idle screen
displays. Now, you can make or receive calls.
Note: The display language is preset to Automatic at the factory. To change the language, use the
3. When you wish to switch off the phone, press and hold the
key until
the power-off image is displayed.
Note: You must store the voicemail server number before accessing the server. Your service provider can
give you the number.
Setting Up Your Voice Mail
To access your voice mail from your keypad, use the following steps:
1. From an Idle screen, press and hold the
key.
9
Setting Up Your Voice Mail
2. Follow the voice mail prompts to access messages.
Accessing Your Voice Mail
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Highlight Recent Calls and press the
key.
3. Highlight Voice Mail.
4. Highlight Connect to Voice Mail and press the
the key.
Select soft key or
5. When connected, follow the voice prompts from the voice mail center.
Changing the Voice Mail Name and Number
Your SIM card gives you default service number of the voice mail center. However,
you may need to change the number. Use the following procedures to change your
voice mail number.
1. In Idle mode, press the Menu soft key
to access Menu mode.
2. Highlight Recent Calls and press Select soft key or the
key.
key.
3. Highlight Voice Mail and press Select soft key or the
4. Highlight Voice Server Number and press the Select soft key or the
key.
5. Press the Edit softkey.
6. To edit the Voice Server Name, highlight Name and press and press
to delete the current name and then use your keypad to enter a
replacement name.
- or -
7. To edit the Voice Mail Number, highlight Center Address and press
to
delete the current number.
8. Enter your new Voice Server number and press the Save soft key or the
key to save this new number.
9. Press the
key to return to Idle mode.
Getting Started 10
Section 2: Understanding Your Phone
Topics Covered
•
•
•
•
•
This section outlines some key features of your phone. It also displays the screen
and the icons that are displayed when the phone is in use.
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many significant features. The
following list outlines a few of the features included in your phone.
User friendly, menu driven access to features and options.
• Bluetooth
• Camera and camcorder
• Video Sharing
• Multi-tasking
• Instant Messaging capability
• E-mail
• Featured applications provide alarms, calendar, calculator, record audio, converter,
timer, stopwatch, and world time.
• File viewer
• Name card
• Multimedia Message Service (MMS)
• Multimedia capability (with included Media player)
• Photo caller ID
• Speakerphone capability
• Web browser
11
Front View of Your Phone
Front View of Your Phone
The following illustrations show the main elements of your phone:
Keys
The following list correlates to the open and front view illustrations.
1. Headset jack/Adapter jack: Allows you to plug in the travel adapter
(power), PC connection cable (data transfer), and optional headset for safe,
convenient, hands-free conversations.
2. Display: This screen indicates when you have an incoming call or
message. It also displays date, time, reception, battery power, and any
icons associated with alerts, such as messages, or a set alarm.
3. Volume keys: Allows you to adjust the ringer volume in standby mode or
adjust the voice volume during a call. The volume key can also be used to
scroll up or down to navigate through the different menu options. To mute
the ringer during an incoming call, press the volume key up or down.
Press and hold these keys to toggle the display on or off. This key is also
used when the Music Player is active.
• If you are playing music and the backlight goes out, you will need to press and
hold this key to gain access to the music player keys. If the backlight is out, the
keys themselves will not wake up the phone or control the music player.
Understanding Your Phone 12
4. Navigation keys: This key allows you to scroll through phone menu
options and provides a shortcut to phone functions from standby mode.
5. Soft keys: Perform the functions indicated by the screen text on the
bottom of the display.
6. Music key: Allows you to access both local and web-based Music
applications.
7. Send key: Allows you to place or receive a call. In standby mode, press the
key once to access the Recent Call log. If you press and hold the key down,
you will initiate the most recent call from the Recent Call log.
8. Voice Mail key: Press and hold the
key to automatically dial your
voicemail.
[ ] character for
9. Special Function keys: Asterisk/Shift key-enters the
*
calling features. In text mode, press to change the character input type.
[ ] character for calling features. In
Pound/Space key-enters the pound #
text entry mode, press to enter a space between characters.
Press and hold the to activate/deactivate the Silent profile. Press and
hold
to enter a pause between numbers.
10. Microphone: The Microphone allows the other callers to hear you clearly
when you are speaking to them.
11. Alphanumeric keypad: Use these keys to enter numbers, letters and
some special characters. When in Idle mode, press and hold the
key to
access your voicemail server or press and hold
International call prefix.
to enter an
12. Clear key: Deletes characters from the display when you are in text entry
mode. Deletes items when in an application. When in a main menu, press
to return to the previous menu.
13. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a
few seconds to power your phone On or Off. While in the main menu, it
returns the phone to standby mode and cancels your input. When you
receive an incoming call, press to reject call.
14. Swap key: Opens the application switch window which allows you to
select from a group of different applications without having to exit from the
currently active application.
15. Camera key: Allows you to take pictures when in camera mode.
13
Internal Display Layout
16. Menu access/Confirm key (WAP browser): When navigating through a
menu accepts the highlighted choice in the menu. If you press once in Idle
mode, the WAP browser will launch.
17. Memory Card slot: Used to install an optional microSDTM card for
additional data storage.
18. Earpiece: Used to listen to audio from your phone.
Back Light
A back light illuminates the display and the keypad when you press any key. It turns
off when no keys are pressed within a given period of time, and/or dims the light,
depending on the settings in the Backlight Time menu.
Internal Display Layout
The display has 3 areas:
Icons
Shows the received signal strength. The greater the number of
bars, the stronger the signal.
Appears when the phone is accessing services in a GPRS
network. When data is being transferred, this icon animates.
Appears when the phone is accessing services in an EDGE
network. When data is being transferred, this icon animates.
Appears when the phone is accessing services in a 3G (UMTS)
network. When data is being transferred, this icon animates.
Understanding Your Phone 14
Appears when the phone is accessing services in a 3G+
(HSDPA) network. When data is being transferred, this
icon animates.
Appears when a call is in progress.
Appears when there is no network coverage available. When
you are out of the service area, you cannot make or receive
voice calls.
Appears when an alarm is set on your phone.
Appears when your incoming phone calls are being forwarded
to another number.
Appears when a new voice mail has been received.
Appears when a new text message has been received.
Appears when a new multimedia message has been received.
Appears when a new E-mail message has been received.
Appears when a push-messages has been received from the
WAP server.
Appears when a new Over the Air (OTA) software update file has
been received.
Appears after your memory card has been inserted.
Appears when Bluetooth wireless technology is active. When
transferring data, this icon blinks red and blue.
Appears when a Bluetooth wireless headset is active and in use.
Appears when you are connected to a PC via a USB port.
15
Internal Display Layout
Appears when you are browsing the Internet while using the
phone as a modem.
Appears when you are connected to a secured web page.
Appears when the phone’s profile is set to either Normal or
Driving. This indicates that the phone’s incoming Alert Type is
set to melody. This audio icon is accompanied on screen
by the Driving icon
Note: The default phone profile is Normal, the profile is editable and the displayed icons may vary
according to the setting.
Appears when the phone’s profile is set to Silent. This indicates
that the phone’s incoming Alert Type is set to vibrate only. This
icon is accompanied on screen by the Vibrate off icon.
Appears when the phone’s profile is set to Driving. In this case,
the speaker is active. In this case, the speaker is active and will
launch the currently selected ringtone or melody when the
associated notification is activated. This icon is accompanied
on screen by the Audio icon.
Appears when the phone’s profile is set to Meeting. In this
case, both the speaker and vibration features are disabled and
only the front panel LCD displays information. This icon is
accompanied on screen by the Vibrate Off icon.
Appears when the phone’s profile is set to Outdoor. In this case,
the speaker is active, the volume settings are raised to their
highest levels, any currently active ringtones or melodies
are activated, and the phone’s vibrate feature is activated.
This icon is accompanied on screen by the Vibrate/Audio icon.
Appears when a phone’s profile is set to Airplane. This
indicates that the phone’s incoming Alert Type allows you to use
many of your phone’s features, such as Games, Music,
Voice Memos, etc., but you cannot send or receive any calls or
Understanding Your Phone 16
access online information. This icon is accompanied on screen
by the Vibrate Off icon.
Appears when the speakerphone feature is being used during
an active call.
Shows the level of your battery. The more bars you see, the
more power you have remaining.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for your ease and
specific needs. These functions are arranged in menus and sub-menus, accessed
using the two soft keys. Each menu and sub-menu allows you to view and alter the
settings of a particular function.
In some functions, you may be asked for a password or PIN. Enter the code and
press the Select soft key or the
key.
When you access a list of options, your phone highlights the currently active option.
If, however, there are only two options, such as On/Off or Enable/Disable, your
phone highlights the option that is not currently active, so that you can select it
directly.
Selecting Options
To view the various functions and options available and to select the one you want:
• Press the appropriate soft key.
• To select the function displayed or the option highlighted, press the Select soft key
or the
key.
• To view the next function or highlight the next option on a list, press the Down
Navigation key or the key on the left side of the phone.
• To move back to the previous function or option on a list, press the Up Navigation
key or the key on the left side of the phone.
• To move back up one level in the menu structure, press the Back soft key.
• To exit the menu structure without changing the settings, press the
key.
Command Keys
17
Command Keys
Functions for the soft keys are defined by what appears above each in the display.
There are two soft keys, the left soft key
and the right soft key
.
Soft Keys
The roles of the soft keys vary depending on the function you are currently using; the
labels on the bottom line of the display just above each key indicate their current
role.
Left Soft Key
Some functions of the left soft key are as follows.
• In the Idle screen, press the Menu (left) soft key
to open the Menu screen.
• When in a menu mode the left soft key
function is Select.
Right Soft Key
Some functions of the right soft key are as follows.
• In the Idle screen, press the Options (right) soft key
to open the My Menu
screen. This menu contains the following:
• 1: Bluetooth
• 2: Alarms
• 3: Calendar
• 4: My Stuff
• 5~12: Empty
• When in a menu mode the right soft key
function is Back.
Clear Key
The CLR key
is used to erase or clear numbers, text, or symbols from the
display. You can also use
mode from any menu.
to return to a previous menu or to return to standby
• If you enter an incorrect character, briefly press
character.
to backspace (and delete) the
Understanding Your Phone 18
• To erase the entire sentence, press and hold
• To back up one menu level, briefly press
.
.
End Key
The End key
is used to turn on/off your phone, disconnect calls, and return to
the standby mode.
• Press and hold the End key
• Briefly press once to disconnect a call.
to return to standby mode from any menu.
to turn on/off your phone.
• Press
Send Key
The Send key
is used to answer calls, dial calls, and to recall the last number(s)
dialed, received, or missed.
• Press
once to answer calls.
• Enter a number and briefly press
to make a call.
• Briefly press
phone.
in standby mode to display a list of recent calls to and from your
• Press
• Press
twice in standby mode to call the most recent number.
to pick up a waiting call.
Navigation Key
Use the directional keys on the Navigation key to browse menus, sub menus, and
lists. Press the up or down navigation when jumping to highlighted links on the web.
Each key also acts as a shortcut to launch applications.
19
Making a Call
Section 3: Call Functions
Topics Covered
•
•
•
•
•
•
•
•
•
•
This section describes how to make or answer a call. It also includes the features
and functionality associated with making or answering a call.
Making a Call
When the Idle screen displays, enter the area code and phone number, and press the
key.
Note: When you activate the Auto Redial option in the Voice Call menu, the phone will automatically redial
up to 10 times when the person does not answer the call or is already on the phone.
Making an International Call
1. Press and hold the
key. The + character appears.
2. Enter the country code, area code, and phone number, then press the
key.
Correcting an Entered Number
Use the following steps to correct a mis-typed entry when dialing.
1. After entering a number
• To clear the last digit displayed, press the
key.
Call Functions 20
• To clear another digit in the number, press the Left or Right Navigation key until
the cursor is immediately to the right of the digit to be cleared. Press the
key.
• To enter a missing digit press the Left or Right Navigation key until the cursor is
in position and enter the digit.
• To clear the whole display, press and hold the
2. Press the key to return to the Idle screen.
Ending a Call
key.
When you want to finish your call, briefly press the
key.
Redialing the Last Number
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the
number or caller is listed in your Address Book, the name associated displays.
To access the Recent Calls menu:
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select.
2. Use the Up and Down Navigation keys to scroll through the Recent Calls
options. Choose from All Calls, Missed Calls, Calls Made, Calls
Received, or Voice Mail.
3. From the Idle Screen, press the
key to display a list of the most recent
numbers used in the order you dialed or received them.
4. Use the Up and Down Navigation keys to scroll through the numbers until
the number you want highlights.
5. To dial the number, highlight the number and press the
key.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM card or in the
phone’s memory. These entries are collectively called the Address Book.
Once you have stored a number in the Address Book, you can dial it by pressing a
few keys using the Speed Dial feature.
21
Answering a Call
Answering a Call
When a call is received the phone rings and displays the caller’s phone number, or
name if stored in the Address Book.
1. From the Idle Screen, press the
key.
If the Any key option in the Call Settings - Answering Mode menu is
activated, you can press any key to answer a call except for the
key
and the Reject soft key.
Note: To reject an incoming call, either press and hold the Volume keys on the left side of the phone or
press
Reject. A quick press of side volume key silences the ringer on an incoming call.
2. End the call by pressing the
key.
Note: You can answer a call while using the Address Book or menu features. After ending the call, the
phone returns to the function screen you were using.
Holding Your Phone
Since the antenna has been integrated into the design of the phone, it is important
not to block the reception path accidentally to ensure the strongest signal possible is
achieved. The orbital internal antenna is located along the bottom portion of your
phone.
Call Functions 22
Video Share Call
The Video Share feature allows you to place a call and view the recipient. You can
initiate or receive a video share call by using the following steps. To enable or
Initiating and Receiving a Video Share Call
To initiate and receive a Video Share session use the following steps:
1. Dial the number and press the
2. Once the call is answered, if you're both capable of Video Share, a "Video
Share Ready" icon will appear on the screen and the Right Soft Key
Right soft key to invite the
key.
will change to Video Share. Press the
other party to see video shot from your phone.
3. "Establishing a Video Connection" displays. A message is sent to the
recipient "###-###-#### Wants to Share Video With You."
4. The recipient will receive a Video Share pop-up to Accept or Decline the
Video Share call. Press the
Left soft key Accept to continue or
Right soft key to Decline.
5. A Recording Started pop-up displays showing the memory available for the
video.
6. During a Video Share session, the following are displayed above the soft
key options:
Stop: press this key to stop the video share feature.
Brightness: press this key to adjust the brightness for the video.
Mute: Press this key to turn the audio off.
Spkr Off: press this key to turn off the speaker.
Full Screen: press this key to change the image orientation from
Landscape Full Screen.
Tip: To stop the video share call press the Options soft key and press the Select the “Video Share End”
soft key.
23
Play a Video Share Recording
A pop-up message displays “Do you want to save the video share call?” The
recorded videos are stored in the My Stuff > Video folder.
Video Share (In-Call)
You can begin a Video Share call during an existing call by pressing
Video
Share, or by pressing the Options and selecting Video Share > Live.
Play a Video Share Recording
During a call (while not in a Live Video Share session) you can share a recorded
video for the recipient. Press the Options key and select Video Share>Recorded>
and then select from the available files in your "My Stuff," folder. To make the
connection, the recipient should press Accept and the Video begins to play on both
phones.
Recent Calls
The phone stores the numbers of the calls you’ve dialed, received, or missed in the
Recent Calls menu. If the number or caller is listed in your Address Book, the
associated name is displayed.
Viewing Missed Calls
The number of calls you have missed is displayed on the Idle screen.To view the
number details, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. To move to another call type, press the Left or Right Navigation key.
Viewing the Details of a Missed Calls
To view the details of a selected missed call, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. With the missed call selected and press the Options soft key.
4. Use the navigation keys to highlight Details and press the
key.
Call Functions 24
Calling Back a Missed Call
To call back a missed call number, use the following steps:
1. Press the View soft key. The most recently missed call is displayed.
2. To scroll through the list of missed calls, press the Up or Down Navigation
key.
3. With the missed call selected and press the Options soft key.
4. Use the navigation keys to highlight Call Back and press the
Saving a Missed Call to your Address Book
To save the missed call entry to your address book, use the following steps:
key.
1. Press the View soft key. The most recently missed call is displayed.
2. With the missed call selected and press the Options soft key.
3. Use the navigation keys to highlight Save to Address Book and press the
key.
4. Select the location of your Address Book:
• Phone: This option allows you to save the missed number to your Address Book
stored on the phone.
• SIM: This option allows you to save the missed number to your Address Book
stored on the optional SIM card.
Sending a Message to a Missed Call
To send a text message or attachment to a missed call entry, use the following
steps:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key and select Send Message. Press the Select
soft key, or the
key.
3. At the “Create New Message” screen, enter the text message. Use the
Alphanumeric keys to type in a message or press the Options soft key to
also Add Items such as an: Image, Sound, or Video.
4. When you are done with your message, press the Options soft key. Use the
navigation keys to highlight Send and press the
key.
Note: When you "Add items" in the options, the setting automatically changes to "Multimedia Message".
25
Call Time
Deleting a Missed Call
To delete a missed call entry, use the following steps:
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key and select Delete. Press the Select soft key, or
the key.
3. At the “Delete?” prompt, press either the
deletion or No to cancel.
You can press the key at any time to exit the Missed Call feature.
Yes soft key to confirm
Call Time
1. From the Idle Screen, press
highlight Recent Calls and press
Menu. Use the navigation keys to
Select or the key.
key.
2. Highlight Call Time and press the Select soft key or the
3. The following options are available.
• Last Call Time: shows the length of time for the last call.
• Total Sent: shows the total length of time for the calls made.
• Total Received: shows the total length of time for the calls received.
4. Select the desired option, press the Reset soft key.
5. Enter the password and press the Confirm soft key to reset the selected
option.
6. Press the Back soft key or the
key to end.
Data Volume
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select.
2. Highlight Data Volume and press the Select soft key or the
key. Data
Volume refers to the amount of data (volume) to and from the phone.
3. Use the Up and Down Navigation keys to view the following information:
• Last Sent Data: shows the size of the last data packet (measured in KB -
kilobytes) sent by the phone.
• Last Received Data: shows the size of the last data packet (measured in KB -
kilobytes) received by the phone.
• Total Sent Data: shows the size of the total data packet (measured in KB -
kilobytes) which have been sent by the phone since the last time this counter
was reset.
Call Functions 26
• Total Received Data: shows the size of the total data packet (measured in KB -
kilobytes) which have been received by the phone since the last time this counter
was reset.
4. Press the Back soft key or the
key to end.
Data Call Time
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select.
2. Highlight Data Call Time and press the Select soft key or the
key.
3. The following options are available:
• Last Data Call: shows the time used for the last data call sent or received.
• Total Data Call: shows the total time used to send or receive data since the last
time this counter was reset.
4. Press the Back soft key or the
key to end.
Silent Mode
Silent mode is convenient when you wish to stop the phone from making noise, in a
theater for example.
In Idle mode, press and hold the
on” message appears on screen. The
key until the phone vibrates, the “Silent Profile
Vibrate icons is displayed on screen.
In Silent mode, your phone’s speakers are muted. The phone will vibrate depending
on the settings of the Silent Phone Settings feature.
To exit and reactivate the previous sound settings, press and hold the
until “Normal Profile on” displays. The Vibrate icon is no longer displayed.
key again
Options During a Call
Your phone provides a number of control functions that you can use during a call.
Adjusting the Call Volume
During a call, if you want to adjust the earpiece volume, use the Volume keys on the
left side of the phone.
Press the
key to increase the volume level and the key to decrease the level.
In Idle mode, you can also adjust the ringer volume using these same keys.
Putting a Call on Hold
You can place the current call on hold whenever you want. You can also make
another call while you have a call in progress if your network supports this service.
To put a call on hold:
27
Options During a Call
1. While on a call, press
Options.
2. Highlight Hold and press the Select soft key. The call is on hold.
3. You can reactivate the call whenever you want, by pressing
To make a call while you have a call in progress:
Resume.
1. Place the current call on hold using the previous procedures.
2. Enter the new phone number that you wish to dial or look it up in the
Address Book.
3. Press the
key to dial the second call. Once connected, both calls are
displayed on the screen.
When you have an active call and a call on hold, you may switch between the two
calls, changing the one on hold to active and placing the other on hold.
To switch between the two calls:
1. Press the
Options soft key.
2. Highlight Swap and press the Select soft key. The current call (#2) is
placed on hold and the previous call on hold (#1) is reactivated so that you
can continue conversing with that person.
3. Press the
To end a call:
1. Press the
key to end the currently selected call.
Options soft key.
2. Highlight End and press the Select soft key.
3. Highlight the call you wish to end (Active Call, Held Call, or All Calls) and
press the Select soft key.
4. Press the
key to end the remaining call.
Using the Speakerphone Key
1. During a call, press the speakerphone key
.
2. Use the volume keys (located on the left side of your phone) to adjust the
volume.
In Call Options
During a call, press the
Options soft key to access the following:
• Mute: Mutes the onboard microphone.
Call Functions 28
• Video Share: Initiates a video conferencing session.
• Whisper Mode ON/OFF: Increases the microphone sensitivity level so that you do
not have to speak louder to be heard by the other party.
• Hold: Places the current call on hold.
• Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this
feature off (unmute the keypad), return to this option and select Send Keypad
Tone.
• New Call: Places the current call on hold and then allows you to enter and dial
another number.
• Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you
have selected. These DTMF tones are sent as a group. The DTMF tones are the
tones used in phones for tone dialling, sounding when you press the number keys.
This option is helpful for entering a password or an account number when you call
an automated system, like a banking service.
• Address Book: Allows you to access your Address Book information.
• Save to Address Book: Allows you to add the currently phone number to your
Contacts list on either your Phone or SIM card.
• View Address Book Details: Displays the Address Book entry information for this
caller.
• Send Message: Allows you to create and send a new Text message or Multimedia
Message.
• Calendar: Allows you to temporarily access your calendar while still maintaining
the current call active.
• Note: Allows you to associate a note with the current phone number.
• End Call: Allows you to end the current call.
If you have are in a multi-party call, the following options also display.
• Join: Joins all of the calls you have established with your phone (both active and
on hold).
• Swap: Places the current call on hold and then activates the previous call.
When you want to finish, end each call normally by pressing the
key.
Muting or Sending Key Tones
These options allow you to turn the key tones off or on. If the Mute Keypad Tone
option is selected, tones of the keys, which allows you to press keys without hearing
annoying key tones during a call.
29
Options During a Call
Note: To communicate with answering machines or computerized telephone systems, the Send Keypad
Tone option must be selected.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that the other person
cannot hear you.
Example: You wish to say something to person in the room, but do not want the person on the phone to
hear you.
During a call, to switch the microphone off temporarily:
1. Press the
Mute. Unmute displays.
2. Press the
Unmute to deactivate the Mute function.
Searching for a Number in Address Book
You can search for a number in Address Book during a call.
1. Press the
2. Press the Down key to highlight the Address Book option.
3. Press the Select soft key or the WAP key.
Options soft key.
4. Highlight the Address Book entry by using the Up or Down Navigation key.
- or -
5. Enter the first few letters of the contact into the Search field which then
highlights the closest match in the Address Book list.
6. To view the highlighted entry, press the
Options soft key.
Call Waiting
The Call Waiting feature allows you to answer an incoming call while you have a call
in progress, if this service is supported by the network, and you have set the Call
Settings > Voice Call > Call Waiting Menu to Activated. You are notified of an
incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the incoming call. The first call is
automatically put on hold.
Call Functions 30
2. To switch between the two calls, press the left Options soft key and
highlight Swap.
To end a call on hold:
1. Press the Options soft key.
2. Select the End Held Call option or press the
key.
To end the current call, press the
key.
Note: Join: Joins all of the calls you have established with your phone (both active and on hold).
Swap: Places the current call on hold and then activates the previous call.
3-Way Calling (Party Line)
The 3-Way or Multi-Line feature allows you to answer a series of incoming calls,
place them on hold, and if this service is supported by the network, and join all of the
calls together. You are notified of an incoming call by a call waiting tone.
To answer a call while you have a call in progress:
1. Press the
key to answer the first incoming call.
2. Press the
key to answer the consecutive incoming calls. The previous
call is then automatically put on hold.
3. To Join the first two calls, press the left Options soft key and highlight
Join.
4. To end the current call, press the
key.
31
Changing the Text Input Method
Section 4: Entering Text
Topics Covered
•
•
•
•
•
This section outlines how to select the desired text input mode when entering
characters into your phone. This section also describes how to use the T9 predictive
text entry system to reduce the amount of key strokes associated with entering text.
Changing the Text Input Method
The Text Input option switches the key entry functions from an T9 Alphabet,
ABC (Alphabet), Numeric Mode, and Symbols Mode.
T9 Input Method (T9 abc, T9 Abc, and T9 ABC)
This input method allows you to enter words with only one keystroke per letter. Each
key on the keypad has more than one letter; for example, pressing the 5 key can
enter J, K, or L. However, the T9 method automatically compares the series of
keystrokes you make with an internal linguistic dictionary to determine the most
likely word, thus requiring far fewer keystrokes than the traditional Alphabet mode.
The T9 abc method makes all characters lowercase. The T9 Abc method makes the
initial character an uppercase while the remaining characters are left as lowercase.
The T9 ABC method all characters uppercase.
ABC (Alphabet) Input Method (abc, Abc and ABC)
This input method allows you to enter letters by pressing the key labeled with the
letter you want. Press the key once, twice, three, or four times until it displays.
The abc method makes all characters of the word lowercase. The ABC method
makes all characters of the word uppercase.
Entering Text 32
Numeric
Symbols
This mode allows you to enter numbers.
This mode allows you to enter symbols, such as punctuation marks.
Add word
This mode allows you to add new words to the phone’s current dictionary.
When you are in a field that allows characters to be entered (such as in a
text message), you will notice the text input mode indicator on the display.
1. To change the text input mode, press the Options key.
2. Highlight Input Method and press the
key. The default mode is Abc.
3. Choose from the following options:
ABC: abc (all lowercase), Abc (initial capitalization) and ABC (all
uppercase).
T9: T9 abc (completed words are all lowercase), T9 Abc (completed words
are initial uppercase) and T9 ABC (completed words are all uppercase).
Numeric: configures the keypad to be used only to enter numbers into a
text message.
Symbols: provides an on screen table which allows you to select from the
list of available symbols associated to each keypad.
Note: Press and hold the
key to access Symbol mode. Press the number key corresponding to the
symbol you want to enter. Use the Up and Down Navigation keys to scroll through the available
symbols. Press the Cancel soft key to exit.
Using the T9 Input Method
T9 Predictive Text input method is based on a built-in dictionary.
Enter a Word in T9 Mode
1. In T9 method, begin entering a word by pressing the 2 to 9 keys. Press
each key only once for each letter. The built-in dictionary lists words that
match the keystrokes you have entered.
2. Example: To enter “Hello”, press
,
,
,
,
The word that you are typing appears in the display. It may change with
each key that you press.
33
Using the Alphabet Input Method
3. Enter the whole word before editing or deleting the keystrokes.
4. When the word displays correctly, go to step 5.
If the word doesn’t display correctly, press the
key to display
alternative word choices for the keys that you have pressed.
Example: Both “Of” and “Me” have the
choice first.
and
keys. The phone displays the most commonly used
5. Insert a space by pressing the
key and start entering the next word.
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you want to add, press
the
key to display the alternative words.
2. When the last alternative word is displayed, Spell displays. Press the Spell
soft key.
3. Enter the word you want to add using the ABC mode.
4. Press the Add soft key or the
key.
The word is added to the T9 dictionary and becomes the first word for the
associated keypress series.
Note: This feature may not be available for some languages.
• To enter periods, hyphens, colons, or parenthesis, press and hold the
key.
T9 mode applies grammar rules to ensure that correct punctuation is used.
• To shift case in T9 mode, use the
lock, Lower case, and Numeric.
key. There are 4 cases: Initial capital, Capital
• You can move the cursor by using the Left and Right keys. To delete letters, press
the key. Press and hold the key to clear the display.
Using the Alphabet Input Method
To use the ABC Alphabet input method use the
to
keys to enter your text.
1. Press the key labeled with the letter you want:
• Once for the first letter
• Twice for the second letter
• And so on
2. Select the other letters in the same way.
Entering Text 34
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or
a different letter on the same key, just wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
Keys
Using the Symbols Input Method
The Symbol input method enables you to insert symbols and punctuation marks into
text.
1. To enter symbol mode press and hold the
key.
2. Use the navigation keys to select an on screen symbol group.
3. To select a symbol from that group, press the corresponding number key.
4. To clear the symbol(s), press the
key. When the input field is empty,
this key returns the display to the previous mode.
5. To return to your message, press the OK soft key or the
key.
35
Section 5: Menu Navigation
Topics Covered
•
•
This section explains the menu navigation for your phone. It also includes an outline
of all the available menus associated with your phone.
Menu Navigation
Menus and sub-menus can be accessed by scrolling through them using the
navigation keys or by using the shortcut keys.
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu mode.
2. Scroll using the navigation keys to reach a main menu, Settings for
example. Press the Select soft key or the
key to enter the menu.
3. If the menu contains sub-menus, Phone Settings for example, you can
access them by first highlighting the option and then by pressing the
Select soft key or the
key. If the menu you have selected contains
further options, repeat this step.
4. To scroll through these menus, press either the Up or Down Navigation key
or the Volume key (located on the left side of your phone). Press the
Select soft key, or the
5. To return to the previous menu level, press the Back soft key, the
6. To exit the menu without changing the settings, press the key.
key to make your selection.
key.
37
Using Shortcuts
Numbered menu items, such as menus, sub-menus, and options can be quickly
accessed by using their shortcut numbers. In Menu mode, Main Menus can be
accessed by pressing the number keys (1 to 0) corresponding to their location on the
screen.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
3. Press the
4. Press the
5. Press the
key for Settings.
key for Phone Settings
key for Language.
key to display the list of available languages.
Menu Outline
The following list shows the menu structure and indicates the number assigned to
each option.
1: AT&T Music
1: Music Player
1: Last played
2: All
3: Recently played
4: Most played
5: Artists
6: Genres
7: Albums
8: Composers
9: Playlists
2: Shop Music
3: MusicID
4: Streaming Music
5: Music Video
1: Go to
2: Go
3: Reload
4: Desktop View
5: Page Size
6: Go to Homepage
Menu Navigation 38
7: Add to Favorites
8: View Favorites
9: Send URL
10: Enter URL
11: Copy URL via Message
12: Save
13: Saved Pages
14: History
15: Advanced
6: The Buzz
7: Community
1: Go to
2: Go
3: Reload
4: Desktop View
5: Page Size
6: Go to Homepage
7: Add to Favorites
8: View Favorites
9: Send URL
10: Enter URL
11: Copy URL via Message
12: Save
13: Saved Pages
14: History
15: Advanced
8: Music Apps
1: Go to
2: Go
3: Reload
4: Desktop View
5: Page Size
6: Go to Homepage
7: Add to Favorites
8: View Favorites
9: Send URL
10: Enter URL
11: Copy URL via Message
12: Save
39
13: Saved Pages
14: History
15: Advanced
2: Messaging
1: Create New Message
1: Add Item
2: Create Item
3: Insert
4: Add Recipients
5: Change to Multimedia Message
6: Input Language
7: Input Method
8: Add Attachment
9: Back
2: Inbox
1: View
2: Reply
3: Forward
4: Call Back
5: Delete
6: Move to Phone
7: Sort by
8: Add to Address Book
3: Mobile Email
1: Yahoo! Mail
2: AOL
3: AIM
4: Windows Live Mail
5: AT&T Yahoo!
6: BellSouth
7: Other providers
4: IM
1: AIM
2: Windows Live
3: Yahoo!
5: Sent
1: View
2: Forward
3: Delete
Menu Navigation 40
4: Move to SIM
5: Move to My Folder
6: Sort by
6: Outbox
1: Edit
2: Send Again
3: Delete
4: Sort by
7: Drafts
1: Edit
2: Send
3: Delete
4: Move to My Folder
5: Sort by
8: My Folder
9: Templates
1: Text Templates
2: Multimedia Message Templates
10: Delete All
1: All
2: Inbox
3: Sent
4: Outbox
5: Drafts
6: My Folder
11: Messaging Settings
1: Text Message
2: Multimedia Message
3: Broadcast*
4: Voice Mail
5: Push Message
12: Memory Status
3: Recent Calls
1: All Calls
1: Details
2: Call Back
3: Video Share***
4: Save to Address Book
5: Send Message
41
6: Delete
7: Add to Reject List
2: Missed Calls
1: Details
2: Call Back
3: Video Share***
4: Save to Address Book
5: Send Message
6: Delete
7: Add to Reject List
3: Calls Made
1: Details
2: Call Back
3: Video Share***
4: Save to Address Book
5: Send Message
6: Delete
7: Add to Reject List
4: Calls Received
1: Details
2: Call Back
3: Video Share***
4: Save to Address Book
5: Send Message
6: Delete
7: Add to Reject List
5: Voice Mail
1: Connect to Voice Mail
2: Voice Server Number
6: Speed Dial
1: Add
2: View
3: Change
4: Remove
5: Voice Call
7: Delete all
1: All Calls
2: Missed Calls
3: Calls Made
Menu Navigation 42
4: Calls Received
8: Call Time
1: Last Call Time
2: Total Sent
3: Total Received
9: Data Volume
1: Last Sent Data
2: Last Received Data
3: Total Sent Data
4: Total Received Data
10: Data Call Time
1: Last Data Call
2: Total Data Call
4: MEdia Net
1: MEdia Net
1: Go
2: Reload
3: Desktop View
4: Page Size
5: Go to Homepage
6: Add to Favorites
7: View Favorites
8: Send URL
9: Enter URL
10: Copy URL via Message
11: Save
12: Saved Pages
13: History
14: Advanced
2: Enter URL
3: Favorites
1: Cellular Video
2: Chat
3: News
4: Sports
5: Weather
6: MEdia Net
4: Saved Pages
5: History
43
1: Go to
2: Delete
3: Properties
6: Advanced
1: Clear Cache
2: Empty Cookies
3: Cookie Options
4: Preferences
5: About Browser
7: Browser Settings
1: MEdia Net wap1.x
2: MEdia Net wap2.x
3: AT&T MMS
4: AT&T IMS
5: AT&T Mall
1: Shop Tones
2: Shop Games
3: Shop Graphics
4: Shop Multimedia
5: Shop Applications
6: MEdia Net Home
6: Cellular Video
1: Go to
2: Go
1: Forward
2: Backward
3: Reload
4: Desktop View
5: Page Size
1: Large
2: Normal
3: Small
6: Go to Homepage
7: Add to Favorites
8: View Favorites
9: Send URL
1: via Message
2: via Bluetooth
10: Enter URL
Menu Navigation 44
11: Copy URL via Message
12: Save
1: Image
2: Web page
13: Saved Pages
14: History
15: Advanced
1: Clear Cache
2: Empty Cookies
3: Cookie Options
4: Preferences
5: Certificates
6: Page Details
7: Browser Settings
8: About Browser
7: My Stuff
1: Audio
1: Open
2: Record Audio
3: Create Folder
4: Copy Folder
5: Sort by
6: Bluetooth Visibility
7: Memory Card Settings**
8: Properties
2: Graphics
1: Open
2: Take Photo
3: Create Folder
4: Copy Folder
5: Sort by
6: Bluetooth Visibility
7: Memory Card Settings**
8: Properties
3: Video
1: Open
2: Record Video
3: Create Folder
4: Copy Folder
45
5: Sort by
6: Bluetooth Visibility
7: Memory Card Settings**
8: Properties
4: Music
1: Open
2: Create Folder
3: Copy Folder
4: Sort by
5: Bluetooth Visibility
6: Memory Card Settings**
7: Properties
5: Games and Apps
1: Open
2: Create Folder
3: Sort by
4: Memory Card Settings**
5: Properties
6: Applications
1: Open
2: Create Folder
3: Sort by
7: Other Files
1: Open
2: Create Folder
3: Copy Folder
4: Sort by
5: Bluetooth Visibility
6: Memory Card Settings**
7: Properties
8: Memory Status
1: Open
2: Create Folder
3: Sort by
8: Address Book
1: View
2: Add New Contact
1: Phone
2: SIM
Menu Navigation 46
3: Voice Call
4: Video Share***
5: Send Message
6: Edit
7: Duplicate
8: Delete
1: Selected
2: Multiple
9: Save to My Stuff
10: Send Business Card
1: As Message
2: via Bluetooth
11: My Business Card
1: Input method
2: Input language
3: Add More Fields
12: Assign Speed Dial
13: Copy to Phone/SIM
1: Selected
2: Multiple
14: Move to Phone/SIM
1: Selected
2: Multiple
15: Service Number
16: FDN Contacts
1: Create FDN Contact
17: Copy to FDN Contacts
18: Print via Bluetooth
19: Address Book Settings
1: Speed Dial
2: Save New Contacts to Always Ask
3: View Contacts from
4: Own Number
20: Memory Status
9: Settings
1: Profiles
1: Normal
2: Silent
3: Driving
47
4: Meeting
5: Outdoor
6: Airplane
2: Display & Light Settings
1: Display Settings
2: Light Settings
3: Time & Date
1: Time zone updating
2: Home Zone
3: Time
4: Date
5: Time Format
6: Date Format
4: Phone Settings
1: Language
2: Shortcuts
3: Auto Key Lock
4: Own Number
5: Call Settings
1: All Calls
2: Voice Call
3: Data Call
6: Connectivity
1: Bluetooth
2: Connections
3: Select USB Mode
4: IMS Settings
7: Software Update
8: Application Settings
1: Messaging Settings
2: Browser Settings
3: Camera Settings
4: Camcorder Settings
5: Player Settings
6: Cellular Video Settings
7: Record Audio Settings
8: Calendar Settings
9: Address Book Settings
10: Video Share Settings***
Menu Navigation 48
9: Security
1: Phone Lock
2: SIM Lock
3: PIN Check
4: Lock Applications
5: FDN Mode
6: Change Phone Password
7: Change PIN Code
8: Change PIN2 Code
10: Reset Settings
1: All
2: Phone Settings
3: Display Settings
4: Profiles
5: Alarms
11: Memory Settings
1: Clear Memory
2: Memory Status
12: Phone Information
1: My Number
2: Manufacturer
3: Model
4: Device ID
5: Hardware Version
6: Software Version
7: Language
8: Client Version
* Shows if this function is SIM dependent.
** Shows only if you have Memory Card is inserted.
*** Shows only if you have Video Share service.
49
Using Contacts List
Section 6: Understanding Your Address Book
Topics Covered
•
•
•
•
•
•
•
•
•
This section allows you to manage your daily contacts by storing their name and
number in your Address Book. Address Book entries can be sorted by name, entry, or
group.
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot
location are saved. To save additional information for a particular contact, such as notes, e-mail,
dates, etc.., it is important to save that Contact into your phone’s onboard memory.
Using Contacts List
Dialing a Number from Address Book
Once you have stored phone numbers in the Address Book, you can dial them easily
and quickly by either using their SIM card location number or by using the Search
field to locate the entry.
Note: The default Address Book entries are: Check Bill Balance - *225#, Directory Assistance - 411,
MusicID - #43, Pay My Bill - *729, View My Minutes - *646#, Voice Connect - *08, *Now - *669.
Understanding Your Address Book 50
Finding an Address Book Entry
You can store phone numbers and their corresponding names onto your SIM card
and phone’s onboard memory. They are physically separate but are used as a single
entity, called the Address Book.
Depending on your particular SIM card, the maximum number of phone numbers the
SIM card can store may differ.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
key.
3. Enter the first few letters of the name.
The Address Book entries are then listed, starting with the first entry
matching your input.
4. To select a different entry, press the Up or Down Navigation key until the
entry you want is highlighted.
5. Once you have found the entry, press the
key to dial the number, or
press the Options soft key to access the Address Book entry options.
Address Book Entry Options
While accessing any Address Book entry, press the Options soft key to use the
options for the entry.
The following options are available:
• View: provides you with details about that contact entry. Press the Back soft key to
return to the Address Book listing.
• Add New Contact: allows you to add a new entry to either your Phone or SIM card.
• Voice Call: allows you to call a currently selected entry.
• Video Share: innitiates a Video Share Call with this contact.
• Send Message: allows you to send a text message or a multimedia message to
the selected entry.
• Edit: allows you to edit the properties of an entry such as: Name, Category, Group,
or location. Press the
key to save your changes.
• Duplicate: allows you to duplicate a selected entry. Press the
key to save your
duplicate entry.
• Delete: allows you to delete either a selected address book entry or multiple
entries from a target location such as the Phone and/or SIM card.
• Save to My Stuff: allows you to copy the contact information from its current
location to your My Stuff folder.
51
Adding a New Contact
• Send Business Card: allows you to send a message to the selected entry which
contains the information from their Address Book entry which you have on file.
This can be sent as either a message or via Bluetooth.
• My Business Card: allows you to send a name card message to the selected
entry. This name card contains your name cards with your number and profile.
• Assign Speed Dial: allows you to set the speed dial key for this entry.
• Copy to Phone/SIM: allows you to copy the contact information from the SIM to
the phone or from your phone to your SIM.
• Move to Phone/SIM: allows you to move the contact information from the SIM to
the phone or from your phone to your SIM.
• Service Number: allows you to search through your address book listings of saved
service numbers.
• FDN Contacts: Fixed Dialling Number mode restricts your outgoing calls to a
limited set of phone numbers. When this feature is enabled, you can make calls
only to phone numbers stored on the SIM FDN list.
• Copy to FDN Contacts: allows you to copy the list of restricted phone numbers
from your phone to the FDN section of the SIM card.
• Print via Bluetooth: allows you send the selected contact entry information to a
Bluetooth compatible printer.
• Address Book Settings: allows you to access the address book settings menu list.
• Memory Status: allows you to view the amount of memory allocation for the
following categories: Phone, USIM, Additional No.1 (SIM card), Additional No.2,
Email, and FDN.
Adding a New Contact
Use the following procedures to store a new contact to your Phone or SIM Card.
Storing a Number in the Phone’s Memory
1. When the Idle screen displays, enter the phone number.
2. Press the Options soft key.
3. Scroll to Save to Address Book by pressing the Up or Down key and
press the Select soft key or the
4. Choose the target location for the entry (Phone or SIM), press the Select
soft key or the key.
key.
5. Press the Select soft key or the
key to assign this number as a New
entry.
6. From the Select Type screen, select from the following category types:
Understanding Your Address Book 52
• Mobile - Private: assigns the number entered as a Private Mobile entry.
• Mobile - Business: assigns the number entered as a Business Mobile entry.
• Landline - Private: assigns the number entered as a Private Landline entry.
• Landline - Business: assigns the number entered as a Business Landline
entry.
• FAX: assigns the number entered as a Fax entry.
• Etc.: allows you to classify the entry as a miscellaneous type.
7. Enter alphanumeric characters into each of the available fields:
• First Name: allows you enter a first name for this entry.
• Last Name: allows you enter a Last name for this entry.
• Display Name: allows you enter a display name for this entry which then
appears when you receive a call from this contact.
• Phone Number: allows you keep or alter the currently entered phone number.
• Number Type: allows you to enter an additional landline-private number to this
entry.
• Contact E-mail: allows you to enter a contact E-mail address for this entry.
• Group: allows you to assign this contact to group. Press the Options > Select
soft key or the
key to display available groups. Use the Up or Down
Navigation keys to select a group. Press the Select soft key or the
save your selection.
key to
• Caller ID: allows you to set a graphic to the Caller ID for this contact. Press the
Options > Select soft key or the key to access the My Stuff menu.
• Ringtone: allows you to choose a ringtone for this contact information. Press the
Options > Select soft key or the key to access the My Stuff menu.
• Instant Messaging: allows you to assign an Instant Message profile to this
entry. Press the key to access the IM menu.
• Note: allows you enter notes associated with this contact.
8. Press the key to save the information for this entry.
53
Adding a New Contact
Storing a Number in the SIM Card
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot
location are saved. To save additional information for a particular contact, such as notes, e-mail,
dates, etc.., it is important to save that Contact into your phone’s onboard memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, and press the Select soft key or the
key.
3. Select the Address Book entry you wish to add and press the Options soft
key.
4. Scroll to Add New Contact by pressing the Up or Down key and press the
Select soft key or the
key.
5. Select SIM and press the Select soft key or the
key.
6. Enter the following information for the New Contact.
• Name: allows you to enter a name for the number entered.
• Phone Number: assigns the number entered to the Mobile entry.
• Group: assigns this contact to group.
• Location: allows you to assign a location number on your SIM for the number
being entered.
7. Press the
key to save your new entry and return to a screen which
then lists the details of your new entry onto the SIM.
8. To view available options for this entry, press the Options soft key:
• Edit: allows you to edit the properties of an entry such as: Name, Number, or
Location. Press the
key to save your changes.
• Voice Call: allows you to call a currently selected entry.
• Video Share: allows you to place a call and view the recipient.
• Send Message: allows you to send a text message or a multimedia message to
the selected entry.
• Duplicate: allows you to duplicate a selected entry. Press the
your duplicate entry.
key to save
• Delete: allows you to delete the currently selected address book entry from a
target location.
• Save to My Stuff: allows you to copy the contact information from its current
location to your My Stuff folder.
• Send Business Card: allows you to send a message to the selected entry
which contains your virtual business card information (such as phone, fax, and
email). This can be sent as either a message or via Bluetooth.
• Copy to Phone: allows you to copy the contact information from the SIM to the
phone or from your phone to your SIM.
Understanding Your Address Book 54
• Move to Phone: allows you to move the contact information from the SIM to the
phone or from your phone to your SIM.
• Copy to FDN Contacts: allows you to copy the restricted phone number list to
the FDN section of the SIM card.
• Print via Bluetooth: allows you send the selected contact entry information to a
Bluetooth compatible printer.
9. To return to the Idle screen, press the
key.
Dialing a Number from the SIM Card using the Location
Number
1. In Idle mode, enter the location number for the phone number you want to
dial and press the
key.
The contact entry information is displayed.
2. Press the Up or Down Navigation key to find other numbers on the list.
3. Press the Call soft key, the
key, or the
key when you have
selected the number you want to call.
Speed Dial
Once you have stored phone numbers from your Address book list, you can set up to
8-speed dial entries and then dial them easily whenever you want, simply by
pressing the associated numeric key.
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the
appropriate key.
Setting Up Speed Dial Entries
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select.
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and
press the Select soft key or the key.
3. Select the key in which you wish to assign the speed-dialing number (from
the 2 to 9 keys), and press the Options soft key or the
Note: Memory location 1 is reserved for your Voice mail server number.
4. Highlight Add and press the Select soft key or the
key.
key. You can choose
to assign a number from your Address Book or FDN contacts.
5. Highlight Address Book and press the Select soft key or the
key.
55
Speed Dial
• Select the previously created Address Book entry you would like to add by
pressing the Up or Down key and press the Select soft key or the
save the entry.
key to
6. Highlight FDN Contacts and press the Select soft key or the
key.
• Select the FDN entry you would like to add by pressing the Up or Down key and
press the Select soft key or the key to save the entry.
Changing a Number Assigned to a Key
1. From the Idle Screen, press
Menu. Use the navigation keys to
Select.
highlight Recent Calls and press
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and
press the Select soft key or the key.
3. Select the key you wish to change and press the Options soft key.
4. Press Change, select a new entry (Address Book or FDN Contacts), and
press the Select soft key or the
key.
5. Use either steps 5 or 6 from the previous section to add the Address Book
or FDN Contacts entry.
6. Once you’ve selected your new entry (by name or number), press the
Select soft key or the
key to confirm the change.
7. After the “Change Speed Dial?” screen appears, press the Yes soft key to
save the new speed dial entry and overwrite the previous information.
8. When you are finished, press the
key to return to Idle mode.
Deleting Speed Dial Entries
1. From the Idle Screen, press
Menu. Use the navigation keys to
highlight Recent Calls and press
Select.
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and
press the Select soft key or the key.
3. Select the key you wish to clear and press the Options soft key.
4. Select Remove and press the Yes soft key to confirm your deletion.
5. When you are finished, press the
key to return to Idle mode.
Understanding Your Address Book 56
Finding My Own Phone Number
This function is a memory aid, which you can use to check your own phone number
if you need to do so.
You can assign a name to each of your own phone numbers registered on your SIM
card. You can also edit the names and numbers. Any changes made here do not in
any way affect the actual subscriber numbers on your SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Settings, press the Select soft key or the
3. Select Phone Information by pressing the Up or Down key and press the
Select soft key or the key.
FDN Mode
key.
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your
outgoing calls to a limited set of phone numbers. When this feature is enabled, you
can make calls only to phone numbers stored in the FDN list on the SIM card.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Settings, press the Select soft key or the
3. Highlight Security by pressing the Up or Down Navigation key, and press
the Select soft key or the key.
4. Highlight FDN Mode by pressing the Up or Down Navigation key, and
key.
press the Select soft key or the
available:
key. The following options are
• Off: you can call any number.
• On: you can only call the phone numbers stored in the SIM FDN list.
You must enter your PIN2 password.
57
Group Settings
Group Settings
Editing a Caller Group
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
3. Scroll to Groups by pressing the Right Navigation key.
key.
4. Scroll through the list of groups by pressing the Up or Down Navigation
key.
5. Highlight the target group entry and press the Options soft key.
6. Highlight Group Settings, press the Select soft key or the
The following options are then available:
key.
• Picture: allows you to view the assigned group image.
• Ringtone: allows you to set the ringtone associated with this group. Choose
from the Default Ringtones or from the Downloaded Ringtones.
7. Once you’ve made your changes, press the Options soft key, select Save
and press the Select soft key or the
key.
8. When you are finished, press the
key to return to Idle mode.
Managing Address Book Entries
You can copy, delete, and view the memory status for the Phone and SIM entries on
your phone.
Copying an Entry to the Phone
You can copy a SIM entry to the Phone by using the Duplicate option. When you copy
entries to the phone, duplicate entries are created.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Select an entry which currently resides on the SIM card.
• If the entry’s associated Group graphic has a SIM location icon on it, then the
entry already exists on the SIM card. This is the type you can duplicate.
• If the entry’s associated Group image does not have a SIM location icon, then
this entry currently also exists on the phone.
4. Press the Options soft key, highlight Copy to Phone, and press the Select
soft key or the
key.
5. When you are finished, press the
key to return to Idle mode.
Understanding Your Address Book 58
Note: Options are available for phone entries that are not available when stored to the SIM card. For details
Deleting All of the Address Book Entries
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
3. Press the Options soft key, highlight Delete, and press the Select soft key
or the key.
4. Highlight Multiple, press the Select soft key or the
5. Choose the location of the Address Book entries you wish to delete (Phone,
key.
key.
SIM, or Phone & SIM), press the Select soft key or the
6. Highlight All and press the key.
You can remove the check mark by pressing the
key.
key again. Selecting
All places a checkmark adjacent to every entry in the list.
7. Press the Delete soft key to delete the entries from the selected memory
location.
8. At the Delete? confirm screen, press the Yes soft key to continue, or the
No soft key to cancel.
9. Enter the password and press the Confirm soft key or the
key.
10. When you are finished, press the
key to return to Idle mode.
Checking the Memory Status
You can check how many names and numbers are stored in the Address book, in
both SIM card and the phone memory. You can also see the capacity of both
memories.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Press the Options soft key.
4. Select Memory Status by pressing the Up or Down Navigation key and
press the Select soft key or the key.
5. When you are finished viewing your phone’s Memory Status, press the
key to return to Idle mode.
59
Managing Address Book Entries
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned by your service
provider. These numbers include emergency numbers, customer service numbers
and directory inquiries.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Address Book, press the Select soft key or the
key.
3. Press the Options soft key.
4. Select Service Number, by pressing the Up or Down Navigation key and
press the Select soft key or the key.
5. Scroll through the numbers by using the Up or Down Navigation key.
6. To dial the number displayed, press the key.
Note: This menu is available only when your SIM card supports Service Dialing Numbers.
Understanding Your Address Book 60
Section 7: Messaging
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
This section describes how to send or receive different types of messages. It also
includes the features and functionality associated with messaging.
Types of Messages
Your phone provides the following message types:
• IM Messages
• Text Messages
• Multimedia Messages
Creating and Sending New Messages
Text Messages
The Short Message Service (SMS) allows you to send and receive short text
messages to and from other mobile phones. To use this feature, you must subscribe
to your service provider’s message service.
The Message icon ( ) displays when you have received new text messages. When
the memory is full, an error message displays and you cannot receive any new
messages. Use the Delete option in each message box to delete obsolete messages.
61
Text Messages
1. When the Idle screen displays, press the Menu soft key.
2. Select Messaging and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Create New Message and
press the Select soft key or the key.
4. Press the Options soft key and highlight Add Recipients. Choose from the
following:
• Text Message: if you have sent a text message to a contact, the number
displays.
• Recent Log: allows you to choose from a brief list of recently dialed phone
numbers. Press the
key to add a selected number to your message’s
recipients list field. This entry can later be appended prior to sending the
message.
• Contacts: allows you to insert additional recipients from your Address Book by
using your Up and Down Navigation keys to select those entries you wish to add.
Press the
key to place a checkmark next to those entries. Once you have
selected the desired entries, press the Add softkey to return to the message.
• Group: allows you to insert additional Group members from your Address Book
by using your Up and Down Navigation keys to select those entries you wish to
add.
• FDN Contacts: allows you to insert numbers assigned to your Fixed Dial Network
(FDN) group.
5. When you have finished writing your message, press the Options soft key.
Choose from the following options:
• Send: allows you to send the message to the selected contact.
• Add Item: allows you to add an image, sound or video clip to your message.
• Create Item: allows you to temporarily exit from the current text message and
create either a new photo, video clip, or audio clip for your current text message.
-
-
-
Take Photo: allows you to temporarily exit the message, take a photo with
phone’s camera, and then add it to your message.
Record Audio: allows you to temporarily exit the message, record an audio clip
using the phone’s microphone, and then add it to your message.
Record Video: allows you to temporarily exit the message, record a video clip
using the phone’s camera, and then add it to your message.
• Insert: allows you to insert a predefined Text template, Text emoticon, Business
card, or favorite web address into the message.
-
Text Template: allows you to insert one of the preset message templates to the
text, such as (Out of Office, I’m in a meeting..).
-
Text Emoticon: allows you to add an a emotion (created by phone characters) to
your message. An example would be:
which creates a :-) “happy face”.
Messaging 62
-
-
Business Card: allows you to add the contact information for an entry from
Address Book directly to your message.
Favorites: allows you to add a web address from your Favorites list of Internet
sites to the message.
• Add Recipients: allows you to update the recipient list by appending it with
information form either your Recent Log, Contacts list, Groups entries or FDN
Contacts.
• Change to Multimedia Message: allows you to convert the current message
to/from either a text or multimedia message prior to being sent.
Note: A multimedia message should only be sent to a phone which can support the receipt and display of
this message type.
• Input Language: allows you to temporarily change the input language used to
create your message.
• Input Method: allows you to change the method used to input data into your
message, such as text, numbers, and symbols. For more information, refer to
• Add Attachment: allows you to add either a file, card, or other information such
as a calendar entry, task, or note.
-
-
-
-
-
-
-
-
-
-
File: allows you to insert an audio, graphic, or video clip to your message as an
attached file.
Business Card: allows you to insert the contact information for an entry from
Address Book directly to your message as an attached file.
Appointment: allows you to insert an Appointment entry from your calendar
directly to your message as an attached file.
Anniversary: allows you to insert an Anniversary entry from your calendar
directly to your message as an attached file.
Private: allows you to insert a Private entry from your calendar directly to your
message as an attached file.
Holiday: allows you to insert a Holiday entry from your calendar directly to your
message as an attached file.
Important: allows you to insert an entry from your calendar tagged as Important
directly to your message as an attached file.
Task: allows you to insert an entry from your calendar tagged as a Task directly
to your message as an attached file.
Note: allows you to insert a presaved Note (text) directly to your message as an
attached file.
Favorites: allows you to add a web address from your Favorites list of Internet
sites as an attachment to the message.
• Back: allows you to return to the active message.
63
Text Messages
6. Press the Send To soft key, confirm the recipient(s). You can add additional
recipients from you Address Book by selecting one of the Empty fields and
pressing the
key.
• Add the additional recipients from your Address Book by then using your Up and
Down Navigation keys to select those entries you wish to add.
• Press the
key to place a checkmark next to those entries.
• Once you have selected the desired entries, press the Add softkey to return to
the previous list of Recipients.
7. Send the message to the selected recipients by either pressing the Send
soft key.
Multimedia Message
The Multimedia Message icon ( ) displays when you have received new
multimedia messages. When the memory is full, an error message displays and you
cannot receive any new messages. Use the Delete option in each message box to
delete obsolete messages.
1. When the Idle screen displays, press the Menu soft key.
2. Select Messaging and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Create New Message and
press the Select soft key or the key.
key.
4. Press the Options soft key and highlight Add Recipients. Choose from the
following:
• Text Message: if you have sent a text message to a contact, the number
displays.
• Recent Log: allows you to choose from a brief list of recently dialed phone
numbers. Press the
key to add a selected number to your message’s
recipients list field. This entry can later be appended prior to sending the
message.
• Contacts: allows you to insert additional recipients from your Address Book by
using your Up and Down Navigation keys to select those entries you wish to add.
-
Press the
key to place a checkmark next to those entries.
-
Once you have selected the desired entries, press the Add softkey to return to
the message.
• Group: allows you to insert additional Group members from your Address Book
by using your Up and Down Navigation keys to select those entries you wish to
add.
• FDN Contacts: allows you to enter a contact from the FDN Contact list.
5. Use the Down Navigation key to access the text field and begin creating
your message.
Messaging 64
6. Press the Options soft key, highlight the Change to Multimedia Message
and press the Select soft key or the key.
Note: A multimedia message should only be sent to a phone which can support the receipt and display of
this message type.
7. Add an Image, Sound, or Video clip directly into your message by pressing
the Options soft key and selecting from one of the following options:
• Send: allows you to send the message.
• Preview: allows you to preview your message prior to being sent.
• Text: allows you to enter, cut, copy, and remove text from your message prior to
being sent.
• Add Item: allows you to add an image, sound or video clip to your message.
• Create Item: allows you to temporarily exit from the current text message and
create either a new photo, video clip, or audio clip for your current text message.
-
-
-
Take Photo: allows you to temporarily exit the message, take a photo with
phone’s camera, and then add it to your message.
Record Audio: allows you to temporarily exit the message, record an audio clip
using the phone’s microphone, and then add it to your message.
Record Video: allows you to temporarily exit the message, record a video clip
using the phone’s camera, and then add it to your message.
• Insert: allows you to insert a predefined Text template, Text emoticon, Business
card, or favorite web address into the message.
-
-
-
-
Text Template: allows you to insert one of the preset message templates to the
text, such as (Out of Office, I’m in a meeting..).
Text Emoticon: allows you to add an a emotion (created by phone characters) to
your message. An example would be:
which creates a :-) “happy face”.
Business Card: allows you to add the contact information for an entry from
Address Book directly to your message.
Favorites: allows you to add a web address from your Favorites list of Internet
sites to the message.
• Add Recipients: allows you to update the recipient list by appending it with
information form either your Recent Call Log, Contacts list, Group entries, or FDN
Contacts.
• Change to Text Message: allows you to convert the multimedia message back
to a text-based message which can contain multimedia files as attachment and
not as part of the main body of the message.
• Add Page: allows you to add a text page to your multimedia message.
• Input Language: allows you to change the language used for the message text.
• Input Method: allows you to change the method used to input data into your
message, such as text, numbers, and symbols. For more information, refer to
65
Text Messages
• Edit Style: allows you to edit the style of your outgoing message with option
such as: Select page, Background Color, Page Duration (for embedded media),
Font Color, and Font Style.
• Add Subject: allows you to add a subject header to your multimedia message.
• Add Attachment: allows you to add either a file, card, or other information such
as a calendar entry, task, or note.
-
-
-
-
-
-
-
-
-
-
File: allows you to insert an audio, graphic, or video clip to your message as an
attached file.
Business Card: allows you to insert the contact information for an entry from
Address Book directly to your message as an attached file.
Appointment: allows you to insert an Appointment entry from your calendar
directly to your message as an attached file.
Anniversary: allows you to insert an Anniversary entry from your calendar
directly to your message as an attached file.
Private: allows you to insert a Private entry from your calendar directly to your
message as an attached file.
Holiday: allows you to insert a Holiday entry from your calendar directly to your
message as an attached file.
Important: allows you to insert an entry from your calendar tagged as Important
directly to your message as an attached file.
Task: allows you to insert an entry from your calendar tagged as a Task directly
to your message as an attached file.
Note: allows you to insert a presaved Note (text) directly to your message as an
attached file.
Favorites: allows you to add a web address from your Favorites list of Internet
sites as an attachment to the message.
• Sending Options: allows you to configure the options associated with sending
the message.
• Save to Drafts: saves the current message to the Drafts folder.
• Save as Template: allows you to save the current text message or multimedia
message to the current list of preset message templates, such as (Out of Office,
I’m in a meeting..).
• Back: allows you to return to the active message.
8. Press the Send To soft key, confirm the recipient(s). You can add additional
recipients from you Address Book by selecting one of the Empty fields and
pressing the
key.
• Add the additional recipients from your Address Book by then using your Up and
Down Navigation keys to select those entries you wish to add.
• Press the
key to place a checkmark next to those entries.
• Once you have selected the desired entries, press the Add softkey to return to
the previous list of Recipients.
Messaging 66
9. Send the message to the selected recipients by either pressing the Send
soft key.
Locating a Message
1. In Idle mode, press the Menu soft key and highlight Messaging. Press the
Select soft key or the
key.
2. Highlight Inbox and press the Select soft key. The message list opens.
The following icons indicate the message type.
•
•
•
•
: indicates a new Voice message
: indicates a new Text message
: indicates a new Multimedia message
: indicates a new E-mail message
Retrieving a Text Message
When a new Text message comes in, the display (in Idle mode) shows a new
Message notification icon ( ) along with the available sender’s information.
1. Press the View soft key to launch the Inbox list of message.
2. Use the Up or Down Navigation keys to select the message.
3. Press the
key to open the message.
key.
4. When you have finished, press the
Retrieving an Multimedia Message
When a new Multimedia message comes in, the display shows the Multimedia
Message icon (
) and a text notification along with the sender’s number.
1. Use the Up or Down Navigation keys to select a message from the list.
2. Press the Options soft key, highlight Properties, and press the Select soft
key or the
key to view brief information about the message, such as
the sender’s number, the message size, and the subject.
If you want to view the message later in the Inbox, press the Back soft key.
3. To view the message, highlight View, and press the Select soft key or the
key.
4. To play the multimedia message, press the
key.
• To pause the audio/video clip, press the
key.
• To stop the audio/video clip press the Stop soft key.
5. To scroll through the message (if additional text page have been added),
press the Up or Down key.
6. When you have finished, press the
key.
67
Using Message Options
Note: Messages can also be accessed by navigating to your Inbox (Menu > Messaging).
Using Message Options
While viewing the content of a message, press the Options soft key to access the
following message options:
Options for SMS Messages
• Reply: allows you to reply to the message via Text message.
• Forward: allows you to forward the message.
• Call Back: allows you to dial the originating message number.
• Delete: deletes the message.
• Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to
the phone’s memory. If a message is stored in the phone’s memory it is then saved
to the SIM card.
• Move to My Folder: allows you to move the message to the My Folder option in
this menu. If you do not have a folder created already, the device prompts you to
create a folder at that time.
• Add to Address Book: allows you to save the recipient or sender’s information
from the message to your Address Book on either the Phone or SIM.
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot
location are saved. To save additional information for a particular contact, such as notes, e-mail,
dates, etc.., it is important to save that Contact into your phone’s onboard memory.
• Print via Bluetooth: allows you to print the content of the text message wirelessly
to a target Bluetooth-compatible printer.
Options for Multimedia Messages
• Play: allows you to view or play the multimedia message.
• Reply: allows you to reply to the message.
• Reply to All: allows you to reply to the all recipients of the message.
• Forward: allows you to forward the message to another person.
• Delete: allows you to delete the selected or all messages.
• Move to My Folder: moves the message to the phone’s My Folder location.
• Save as Template: saves to the message as a template for this message type.
This template can be used to save time during the creation of the next similar
message.
• Save Items: saves the multimedia content to the My Stuff folder.
Messaging 68
• Add to Address Book: allows you to save the recipient or sender’s information
from the message to your Address Book on either the Phone or SIM.
• Print via Bluetooth: allows you to print the content of the text message wirelessly
to a target Bluetooth-compatible printer.
• Lock: locks the message.
• Properties: displays some of the file properties for the message such as: sender,
date/time, file size, priority, etc..
Signing into your Mobile Email
Take your email with you! With Mobile Email you can check your Yahoo!® Mail, AOL®,
Windows Live Hotmail, AT&T Yahoo!®, BellSouth, and AIM quickly and easily from the
SYNCTM
.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select Mobile Email and press the Select soft key or the
key.
key.
4. Use the Navigation keys to select an e-mail carrier of your choice and
press the Select soft key or the key.
5. Use the Navigation keys to select which domain your personal account
uses (e.g., "@hotmail.com") and press the Select soft key or the
key.
6. Type in your personal Email address (e.g., "silverfox2"), then enter your
account's Password and press the Sign In soft key. You will be connected
to your account's Inbox and contacts, where you can send and receive
emails.
Using Instant Messenger (IM)
The Instant Messaging function allows you to send and receive instant messages
using AIM, Windows Live, and Yahoo communities. You must first create a default
community account before accessing it on your phone. To access your default
community session settings, use the following steps:
Default Community Settings
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the key.
4. Select Settings and press the Select soft key or the
key.
key.
5. Select Choose Your Community and press the Select soft key or the
key. This is the service that will load when you press the IM soft key.
69
Signing into your IM Account
6. Use the Navigation keys to highlight your option, and press the Select soft
key or the
key to save your selection.
Signing into your IM Account
Although each account type differs, the initial sign in procedure is common to all
supported types. Before beginning the sign in procedure, you must complete the
previous procedures for selecting your default IM Community.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
3. Select IM and press the Select soft key or the key.
4. Select Sign In/On and press the Select soft key or the
key.
key.
5. Use the Navigation keys to select each log in field and then use the keypad
to enter the appropriate information.
6. Press the Options soft key. Highlight Sign In and press the Select soft key
or the
key.
Using Message Templates
Your phone has message templates (both SMS and MMS) which allows you to
retrieve them when creating a message. You can change the templates as your
preferences or send a message immediately.
1. When the Idle screen displays, press the Menu soft key.
2. Select Messaging and press the Select soft key or the
key. Highlight
Templates and press the Select soft key or the
key.
3. Highlight a template type (Text or Multimedia) and press the Select soft
key or the
key.
4. Use the Up or Down Navigation Keys to select a current template message
and press the Options soft key to access the following options:
• Send: allows you to send an SMS and MMS message using the template.
• Add New: allows you to add a new the template.
• Edit: allows you to change the currently selected template.
• Delete: deletes the currently selected template.
5. When you have finished, press the
key.
Deleting Messages
You can delete the messages in each message folder(s) individually or all at one
time. You can also delete all of your messages at one time.
1. When the Idle screen displays, press the Menu soft key.
Messaging 70
2. Highlight Messaging, and press the Select soft key or the
key.
key.
3. Highlight Delete All and press the Select soft key or the
4. Using the Up or Down Navigation key to select the message folder(s) you
want to empty.
5. Press the
key to mark the folder you want to delete.
• All: allows you select all of the list items and mark each one for content deletion.
• Inbox: allows you select the your Inbox folder and mark its files for deletion.
• Sent: allows you select the your Sent folder and mark its files for deletion.
• Outbox: allows you select the your Outbox folder and mark its files for deletion.
• Drafts: allows you select the your Drafts folder and mark its files for deletion.
• My Folder: allows you select the your My Folder and mark its files for deletion.
To view the contents in each folder, use the Right key to display the
folder’s contents or use the Left key to close the folder’s contents.
To delete all of the messages in all folders, select All.
6. Press the Delete soft key. At the “Delete?” pop-up, press the Yes soft key
or the
key to delete.
7. When you have finished, press the
key.
Messaging Settings
You can set up various options for using messaging services.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
key.
3. Highlight Messaging Settings and press the Select soft key or the
key.
4. Select the type of messages for which you want to change.
• Text Message
• Multimedia Message
• Broadcast Message
• Voice Mail
• Push Message
5. Press the Select soft key or the
Text Message
The following options are available:
key.
• Sending Options: allows you to set the following options:
• Keep a Copy: allows you to keep a copy of your sent messages.
71
Messaging Settings
• Text Message Center Settings: allows you to set the default method of text
message transmission used by the Text Message Center. The options are:
• SMS Settings: allows you to configure the text center parameters such as
phone number and validity period.
• Email Settings: allows you to configure the Email parameters used when
sending this type of message.
• Empty: allows you to configure a new Text Message Center profile for use when
sending this type of message.
Multimedia Message
The following options are available:
• Sending Options:
• Priority: you can select the priority level of your messages.
• Expiration: select the length of time you wish the message you sent to remain
on the MMS server.
• Delivery: you can set a time delay before the phone sends your messages.
• Message Size: you can set the maximum allowed size for a multimedia
message.
• Request Delivery Report: when this option is enabled, the network informs
you whether or not your message has been delivered.
• Request Read Report: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
• Keep a Copy: you specify whether you want to keep a copy of the sent
messages on your phone.
• Add My Business Card: you send your content information along with your
sent messages.
• Receiving Options: you can specify the category of messages you want to
receive. Allows you to set the following:
• Download Type: allows you to set the message receipt options. Choose from
Auto Download, Manual, or Reject.
• Send Delivery Report: when this option is enabled, the phone informs the
network whether or not your message has been received.
• Send Read Report: when this option is enabled, your phone sends a
notification back to the recipient indicating that your message has been received.
• Reject Anonymous: allows you to automatically reject messages with a
category of anonymous.
• Reject Advertisement: allows you to automatically reject messages with a
category of advertisement.
• Multimedia Message Profiles: you can select a connection profile which is then
used for sending and receiving Multimedia messages.
Messaging 72
• MMS Profiles: allows you to select an option for sending a multimedia message.
Choose from the following options:
• MEdia Net wap1.x
• MEdia Net wap2.x
• AT&T MMS
• AT&T IMS
• Profile Settings (accessed by pressing the Options softkey)
• Set Name
• Access Name
• Auth Type
• User ID
• Password
• Home URL
• Proxy address
• Port
• Linger Time (Sec.)
• Advanced Settings (Static IP, Static DNS, and Traffic Class)
• Auto Resize Image: you can specify that the received image by be resized up/
down:
• No Resize
• 100 KB
• 300 KB
• 600 KB
• Creation Mode: you can specify that the users creating new media content be
given the following options:
• Warning
• Free
• Restricted
• Default Style: you can specify the default visual parameters used by this type of
message:
• Font Color
• Font Style
• Background Color
• Page Duration
• Broadcast Message*: The following options are available:
• Read: allows you to read the first Broad Message displayed. Use the Navigation
key to scroll through the messages.
• Receive: allows you to enable or disable the reception of broadcast messages.
73
Memory Status
• Channel: allows you to indicate the channels from which you wish to receive
broadcast messages. The following options are available:
-
-
-
-
Save: use to save the channel for future use.
Add Channel: use to enter the ID and title for a new channel.
Delete: use to remove a channel from the list.
Edit: use to change the ID and title of an existing channel.
• Language: allows you to select your preferred language in which to display cell
broadcast messages.
Please contact your service provider for further details.
Voice Mail Message
The following options are available:
• Voicemail: you can specify the default phone number used for access of phone’s
remote voicemail:
• Name: allows you to create a new descriptive name for this access number.
• Center Address: allows you edit the existing number and create a new number
for use when accessing the remote voicemail.
Push Message
The following options are available:
• Receiving Option: you can specify whether to turn push message reception On or
Off.
• Service Loading: you can specify whether to load this service:
• Always
• Prompt
• Never
Memory Status
You can check the amount of the memory being used and the memory remaining for
Multimedia, Text, Push, and Configuration Messages. The display shows the total
space including the used and free space. You can also view how much space is
currently occupied by each message box.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
key.
key.
3. Highlight Memory Status and press the Select soft key or the
4. Use your Up and Down Navigation keys allow you to view the Inbox, Sent,
Outbox, etc. select a particular folder for review.
Messaging 74
5. Use the Left and Right Navigation keys to allow you to switch between the
Multimedia Message, Text Message, Push Message, and Configuration
Message folders.
6. Press the Select soft key or the
key. The contents of that folder are
then listed.
7. When you have finished, press the
key.
75
Sound Settings
Section 8: Changing Your Settings
Topics Covered
•
•
•
•
•
•
•
•
•
•
This section explains the sound and phone settings for your phone. It includes
display settings, security settings, and extra settings associated with your phone.
Sound Settings
You can customize various sound settings.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
3. Select Profiles and press the Select soft key or the
key.
key. Use the
Down Navigation key to scroll through the following list of available
options:
Normal Profile
To access the available options for this calling profile, press the Options soft key.
Highlight Edit and press the Select soft key or the key. Use the Left and Right
Navigation keys to move between the various tabs. This menu allows you to alter the
audio settings for the following categories:
• Incoming Call: allows you to edit the properties for audio alert used for incoming
phone calls.
Changing Your Settings 76
• Call Alert Type: allows you to select the way in which the selected ringtone is
played to notify you of an incoming call. Options include:
-
Melody: the phone sounds the selected melody.
-
Increasing Melody: the phone sounds the selected melody at continually
increasing volume until the incoming call is answered.
-
-
-
Vibration then Melody: the phone vibrates then plays the melody.
Vibration & Melody: the phone vibrates and also plays the melody.
Vibration & Increasing Melody: the phone vibrates and also plays the
melody at increasing volume levels during each consecutive ring.
• Voice Call Ringtone: allows you to select a ringtone from your My Stuff
(Phone) folder which contains not only the default phone ringtones, but also any
new ringtones which have been downloaded from the Internet.
• Ringtone Volume: allows you to select the volume at which the ringtone is
played. This range is from 1 - 7.
• Auto Reply: allows you to setup an automatic text reply for missed calls.
• New Messages: allows you to edit the properties for audio alert used for newly
received messages.
• Message Alert Type: allows you to select the way in which the selected
ringtone is played to notify you of a message. Options include the use of either
the Mute, Melody, Vibration, or a combination of the latter two.
-
-
-
-
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
Vibration & Melody: the phone vibrates and also plays the melody.
Mute: the alert is muted.
• Message Alert Tone: allows you to select either an Effect Tone (Beep, Pure,
Clean, or Fun) or a personalized My Alert Tone from your My Stuff (Phone) folder
which contains not only the default phone tones, but also any new tones which
have been downloaded from the Internet.
• Message Alert Repetition: allows you to select whether the message alert
tone is used to notify you of a new message only once or periodically until you
open the message.
• Alert Tone Volume: allows you to select the volume at which the tone is
played. This range is from 1 - 7.
• Phone Sounds: allows you to edit the properties for phone’s audio properties while
it is set to this mode
• Keypad Tones: allows you to select what tone is played when the keypad keys
are pressed. Options include the Beep, Clean, or Mute.
• Power On Type: allows you to select what tone is played when the phone is
powered On. Options include a Melody, Vibration, Vibration & Melody, or Mute.
• Power Off Type: allows you to select what tone is played when the phone is
powerd Off. Options include a Melody, Vibration, Vibration & Melody, or Mute.
77
Display & Light Settings
• Volume, Phone Sounds: allows you to select the volume at which the keypad
tone is played. This range is from 0 - 7.
Note: To save any changes made to this profile’s parameters, press the Options soft key. Highlight Save
and press the Select soft key.
Other Available Profiles
The phone can be set to additional audio profiles which are available via the Profiles
menu. Although each profiles has similarities, they have each been preset to use
different audio parameters for incoming phone call alerts, message alerts, and
• The Silent profile causes the speaker to be muted and the phone only
vibrates and displays information. This icon is accompanied on screen
the Vibrate icon.
Note: The Silent profile can also be activated by pressing and holding the
key. An on screen message
notifies you that the new Silent profile is now active. To deactivate this profile, press and hold the
key again.
• The Driving profile keeps the speaker is active. In this case, the speaker
is active and will launch the currently selected ringtone or melody
when the associated notification is activated. This icon is accompanied
on screen by the Driving icon.
• The Meeting profile causes both the speaker audio and vibration
features to be disabled and only information displays information.
This icon is accompanied on screen by the Audio icon.
• The Outdoor profile keeps the speaker active, the volume settings are
raised to their highest levels, any currently active ringtones or melodies
are activated, and the phone’s vibrate feature is activated. This icon is
accompanied on screen by the Vibrate/Audio icon.
• The Airplane profile allows you to use many of your phone’s features,
such as Games, Music, Notepad, Voice Memos, etc., but you cannot
send or receive any calls or access online information. This icon is
accompanied on screen by the Airplane icon.
Display & Light Settings
In this menu, you can change various settings for the display or backlight.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
Changing Your Settings 78
3. Select Display Settings and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
Display Settings
• Wallpaper: allows you to select from either the preloaded wallpapers found in the
My Stuff (Phone) folder or photographs which have been either taken with the
camera or downloaded from the Internet. The None option leaves the wallpaper
blank. Press the Up or Down Navigation keys to make your selection. Press the
Set soft key or the
key to make your selection.
• Greeting Message: allows you to enter the text which appears on the screen then
the phone powers on.
• Menu Style: allows you to select the whether the phone’s menus are presented in
either a Grid Menu style of List Menu style. Press the Up or Down Navigation
keys to make your selection. Press the Save soft key or the
key to make your
selection.
• Pop Up List Menu: allows you to select the whether the to activate pop up menus.
Press the Up or Down Navigation keys to make your selection. Choose from On or
Off. Press the Save soft key or the
key to make your selection.
• Idle Screen Setting: allows you to select what is displayed when the phone is in
Idle mode. Press the Left or Right Navigation keys to make your selection. Choose
from Text Clock, Clock 1, Clock 2, or Calendar. Press the Save soft key or the
key to make your selection.
• Dialing Display: allows you to select the properties of those items which are part of the
display such as Font and Color:
• Font Type: allows you to select what font is used. Press the Left or Right Navigation
keys to make your selection. Choose from Normal, Quill Pen, or Sticky Note. Press the
Save soft key or the
key to make your selection.
• Font Size: allows you to select a size for the selected font. Press the Left or Right
Navigation keys to make your selection. Choose from Large, Medium, or Small. Press
the Save soft key or the
key to make your selection.
• Font Color: allows you to select a color for the selected font. Press the Left or Right
Navigation keys to make your selection. Choose from Monochrome, Rainbow,
Gradation, or Basic. Press the Save soft key or the
key to make your selection.
• Background Color: allows you to select a color for the background screen. Press the
Left or Right Navigation keys to make your selection. Choose from the available
colors. Press the Save soft key or the
key to make your selection.
79
Time & Date
Light Settings
• Brightness: allows you to adjust the display brightness for the LCD to see it better
in different lighting conditions. Press the Left or Right Navigation keys to adjust
the brightness. Press the Save soft key or the
key to make your selection.
• Backlight Time: allows you to select the amount of time for the backlight to
remain on and the length of time for the actual dimming to occur. Press the Up or
Down Navigation keys to make your selection. For On choose from either 15
Seconds, 30 Seconds, or 1 Minute. For Dim choose from either Off, 5 Seconds, 15
Seconds, 30 Seconds, or 1 Minute. Press the Save soft key or the
key to
make your selection.
• Keypad Light: allows you to determine when to use the keypad light. Press the Up
or Down Navigation keys to make your selection. Choose from either Use at Any
Time, or Use at Custom Time. Press the Save soft key or the
key to make
your selection.
Time & Date
This menu allows you to change the current time and date displayed. You can also
find out what time it is in another part of the world.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Time & Date and press the Select soft key or the
key. The
following options are available. Use the Down Navigation key to scroll to
and set options:
• Time zone updating: allows you to select whether the time zone information is
updated: Automatic (which greys-out all other options), Manual Only, or Prompt
first.
• Home Zone: allows you to enter the assign your current time zone based upon
Greenwich Mean Time. Major cities in each zone are displayed upon selection. Use
the Left or Right Navigation key to select a new zone. Press the OK soft key or the
key to save the new selection.
Tip: You can also choose to activate Daylight Savings Time within the Home Zone menu option.
• Time: allows you to enter the current time using your keypad. Press the Right
Navigation key to select AM or PM. Press the Save soft key or the
key to save
the new selection.
Changing Your Settings 80
• Date: allows you to enter the current date using your keypad. Press the Left or
Right Navigation key to navigate between the month, day, or year fields. Press the
Save soft key or the
key to save the new selection.
• Time Format: allows you to change the time format to 12 hours or 24 hours. Use
the Left or Right Navigation key to select between the two options. Press the Save
soft key to save the new selection.
• Date Format: allows you to change the date format. Press the
key to activate
the option. Use the Up or Down Navigation key to select between the different
options. Press the OK soft key to change the format. Press the Save soft key to
save the new selection.
Note: Automatic updates of time and date do not change the time you have set for alarm settings or
calendar memos.
Phone Settings
To customize the settings of your phone use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Phone Settings and press the Select soft key or the
key.
The following options are available. Use the Down Navigation key to scroll
to and set options:
• Language: allows you to select a display language. You can set the Text Language
or the Input Mode.
• Screen Text: allows you to select the phone text. Use the Up or Down Navigation
key to highlight your selection. Press the OK softkey or the key to make your selection.
Press the Save soft key to save your new selection. Options include:
-
Automatic: the language is automatically selected according to the language
of the SIM card used.
-
-
-
English: the selected phone language is changed to English.
Français: the selected phone language is changed to French.
Español: the selected phone language is changed to Spanish.
• Input T9: sets the language used when entering text into the phone. Use the Up or
Down Navigation key to highlight your selection. Press the OK softkey or the key
to make your selection. Press the Save soft key to save your new selection. Options
include:
-
-
-
English: the selected phone language is changed to English.
Français: the selected phone language is changed to French.
Español: the selected phone language is changed to Spanish.
• Shortcuts: allows you to change the applications assigned to your Navigation keys.
81
Call Settings
• Press a particular Navigation key and press the Options softkey.
• Highlight Change and press the
. Use the Up or Down Navigation key to
select a new application to assign to the previously pressed key.
• Press the Save soft key or the
assigned Navigation key.
key to save the new application to the
• Auto Key Lock: sets the keypad to auto lock. To unlock the keypad, use the Up or
Down Navigation key to select On or Off. Use the
key to make your selection
and press the Select soft key. You can also enable this feature by pressing the
key. To disable this feature, press the
keypad is unlocked.
Unlock then press the
key. The
• Own Number: allows you to enter a name and number into your phone for easy
referral.
Call Settings
This menu allows you to change the actions taken by the phone when dialing and
receiving calls. These settings extend to not only voice calls but also Data calls as
well.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Call Settings and press the Select soft key or the
key. The
following options are available. Use the Down Navigation key to scroll to
and set options:
All Calls
This allows you to configure some common high level parameters used by the phone
for most types of calls.
• Show My Number: allows you to select how your ID is handled when an outgoing
call is initiated. Use the Up or Down Navigation key to highlight your selection.
Press the
key to make your selection. Press the Save soft key to save your
new selection. Options include:
• By Network: you are identified to the other party using the default network
information.
• Send: your phone number and name are sent to the other party.
• Hide: your identifying information is hidden from the other party.
• Auto Reject: allows you to enable a phone feature which allows you to
automatically reject calls from a list of contacts. Use the Left or Right Navigation
key to toggle the activation of this feature. Select Reject List and press the
key to access the list of rejected numbers. Press the
key to select an entry
from the list of press the Create soft key to create a new phone entry. Press the OK
Changing Your Settings 82
softkey or the
new selection.
key to make your selection. Press the Save soft key to save your
• Answering Mode: allows you to select how your phone answers incoming calls.
Use the Up or Down Navigation key to highlight your selection. Press the
to make your selection. Press the Save soft key to save your new selection. Options
include:
key
• Normal: allows you to answer an incoming call by pressing either the Accept
soft key or the
key.
• Any key: allows you to answer an incoming call by pressing any key on your
phone.
• Show Caller ID: allows you to select whether your phone displays the caller ID
information for the incoming call. Use the Left or Right Navigation key to toggle the
activation of this feature. Press the
key to make your selection. Press the Save
soft key to save your new selection. Options include:
• Activation On/Off: allows you to set whether your phone displays the caller ID
for the incoming call.
• Call Status Tones: allows you to activate an alert tone for one of three available
status categories. Use the Up or Down Navigation key to highlight your selection.
Press the
key to make your selection. Press the Save soft key to save your
new selection. Options include:
• Call Connect Tone: allows you to activate an alert tone when the a connection
has been made.
• Minute Minder: allows you to activate an alert tone which sounds every minute
the call is active.
• Call End Tone: allows you to activate an alert tone when the a connection has
been terminated.
• Alerts On Call: allows you to activate an alert tone for new messages being
received during an active call. Use the Up or Down Navigation key to highlight your
selection. Press the
key to make your selection. Press the Save soft key to
save your new selection. Options include:
• Off/On: allows you to toggle the activation of this feature. Selecting Off prevents
a new message alert from sounding while you are on an active call. Selecting On
allows an alert tone to sound if you receive a new message during an active call.
Voice Call
This allows you to configure those phone parameters associated to voice calls.
• Call Forwarding: enables incoming calls to be rerouted to a number that you
specify. Use the Up or Down Navigation key to highlight your selection. Press the
key to make your selection. Press the Select soft key to save your new
selection. Options include:
83
Call Settings
• Always: allows you to forward Voice Calls. Press the Select soft key and either
enter the phone number or press the Options soft key to select a number from
your Address Book. Once you have selected a number, press the Options soft
key and select to either Activate/Deactivate this feature.
• If Busy: allows you to forward Voice Calls to a designated number instead of
your voice mail number if you are on another phone call. Press the Select soft
key and either enter the phone number or press the Options soft key to select a
number from your Address Book. Once you have selected a number, press the
Options soft key and select to either Activate/Deactivate this feature.
• If No Reply: allows you to forward Voice Calls to a designated number instead of
your voicemail number when there is no answer on your phone. Press the
Select soft key and either enter the phone number or press the Options soft
key to select a number from your Address Book. Once you have selected a
number, press the Options soft key and select to either Activate/Deactivate
this feature.
• If Out Of Reach: allows you to forward Voice Calls to a designated number
instead of your voicemail number when you are not in an area covered by your
service provider or when your phone is switched off. Press the Select soft key
and either enter the phone number or press the Options soft key to select a
number from your Address Book. Once you have selected a number, press the
Options soft key and select to either Activate/Deactivate this feature.
• Cancel All: allows you to cancel all Call Forwarding features. Press the Select
soft key to activate this feature.
• Call Waiting: informs you when someone is trying to reach you during another call.
Press the
key to make your selection. Press the Select soft key to save your new
selection. Options include:
• Activate: allows you to activate this feature for all Voice Calls. Press the
Options soft key to select this option.
• Deactivate: allows you to deactivate this feature for all Voice Calls. Press the
Options soft key to select this option.
• Check Status: allows you to check the status of this feature for all Voice Calls.
Press the Options soft key to select this option.
• Auto Redial: allows to you automatically redial the last number if the call was either
cut off or you were unable to connect. Press the
key to make your selection.
Press the Save soft key to save your new selection. Options include:
• Off: keeps the phone from automatically redialing the last number if the call was
disconnected or the call was cut off.
• On: causes the phone to automatically redial the last number if the call was
disconnected or the call was cut off.
Data Call
This allows you to configure those phone parameters associated to data calls.
Changing Your Settings 84
• Call Forwarding: enables incoming data calls to be rerouted to a number that you
specify. Use the Up or Down Navigation key to highlight your selection. Press the
key to make your selection. Press the Select soft key to save your new selection.
Options include:
• Always: allows you to forward Data Calls. Press the Select soft key and either
enter the phone number or press the Options soft key to select a number from
your Address Book. Once you have selected a number, press the Options soft
key and select to either Activate/Deactivate this feature.
• If Busy: allows you to forward Data Calls to a designated number instead of your
voice mail number if you are on another phone call. Press the Select soft key
and either enter the phone number or press the Options soft key to select a
number from your Address Book. Once you have selected a number, press the
Options soft key and select to either Activate/Deactivate this feature.
• If No Reply: allows you to forward Data Calls to a designated number instead of
your voicemail number when there is no answer on your phone. Press the
Select soft key and either enter the phone number or press the Options soft
key to select a number from your Address Book. Once you have selected a
number, press the Options soft key and select to either Activate/Deactivate
this feature.
• If Out Of Reach: allows you to forward Data Calls to a designated number
instead of your voicemail number when you are not in an area covered by your
service provider or when your phone is switched off. Press the Select soft key
and either enter the phone number or press the Options soft key to select a
number from your Address Book. Once you have selected a number, press the
Options soft key and select to either Activate/Deactivate this feature.
• Cancel All: allows you to cancel all Call Forwarding features. Press the Select
soft key to activate this feature.
• Call Waiting: informs you when someone is trying to reach you during another call.
Press the
key to make your selection. Press the Select soft key to save your new
selection. Options include:
• Activate: allows you to activate this feature for all Data Calls. Press the Options
soft key to select this option.
• Deactivate: allows you to deactivate this feature for all Data Calls. Press the
Options soft key to select this option.
• Check Status: allows you to check the status of this feature for all Data Calls.
Press the Options soft key to select this option.
Connectivity
The Connectivity Settings allow you to manage the settings associated with the
connection types available to your phone, including, Bluetooth, Network, Wireless
connectivity, USB. and IMS Settings.
85
Connectivity
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Connectivity and press the Select soft key or the
key. Use the
Down Navigation key to scroll to and set these options.
Bluetooth
Bluetooth is a short-range wireless communications technology capable of
exchanging information over a distance of about 30 feet without requiring a physical
connection. Unlike infrared, you don't need to line up the devices to beam
information with Bluetooth. If the devices are within a range of one another, you can
exchange information between them, even if they are located in different rooms.
The Bluetooth wireless technology settings menu provides the ability to view and
change the device name, show the visibility, and set the security for the device.
Activation of Bluetooth
When the Bluetooth is turned on, you can use the Bluetooth features available. When
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To
save battery life or in situations where Bluetooth use is prohibited, you can turn off
the Bluetooth wireless technology headset.
My Devices
This menu provides a list of Bluetooth wireless technology devices discovered by
your handset.
1. From the Bluetooth menu items, highlight My Devices and press the
Select soft key or the
key.
2. To search for the Bluetooth device(s), highlight Search For New Device
and press the Select soft key or the
key.
Connecting to a Bluetooth Device
From the Device list,
1. Highlight the device and press the Select soft key or the
key.
2. Enter the PIN for the device.
If connecting to a Bluetooth wireless device consult your Bluetooth device
user manual for your assigned PIN.
If connecting to another handset, enter the same user-defined PIN on both
handsets.
Changing Your Settings 86
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the
same PIN. Once the handsets are paired, you will not need to use the PIN again.
3. Press the OK soft key or the
key.
4. If you are unable to pair with the device a popup appears in the display.
Press the Yes soft key to retry.
Configuring your Phone’s Bluetooth Visibility
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This can be useful if you are attempting to connect
additional Bluetooth devices. Allowing your phone to promote its visibility can pose a
security risk and incite unauthorized connection. This feature should be paired with a
Bluetooth security option.
1. Highlight the option (On/Off) and press the Select soft key or the
key.
Configuring your Phone’s Bluetooth Name.
Configuring your Phone’s Name
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name
entered into this text field. This name can be altered by selecting the pre-existing
text and selecting a new text string in its place. This feature should be paired with a
Bluetooth security option.
1. Press the
key to erase the previous name.
2. Use the phone’s keypads to enter a new name. The default input entry
method is Abc, where the initial character is Uppercase and each
consecutive character in that same word is left as lowercase text.
3. Press the Save soft key or the
key to save the new name.
Configuring your Phone’s Bluetooth Security (Secure Mode)
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its
phone name and status. This transmission can pose a security risk and incite
unauthorized connection to your phone. It is recommended that you active your
phone’s Bluetooth security.
1. Highlight the option (On/Off) and press the Select soft key or the
Bluetooth Services
key.
Actually, the Bluetooth specification is a protocol that describes how the short-range
wireless technology works, whereas individual profiles describe the services
supported by individual devices. Profiles reduce the chance that different devices
will not work together.
87
Connectivity
Your phone supports the following profile services:
• Headset: enables outgoing and incoming calls.
• Handsfree: the remote carkit enables outgoing and incoming calls.
• Bluetooth Stereo Headset: enables outgoing and incoming calls via a headset
equipped with stereo headsets.
• Serial Port: data communication can be established via a Serial Port connection.
• Dial up: The phone is configured as a dial up modem for access to the Internet.
• Basic printing: The phone is configured to use bluetooth technology to enable basic
printing from the phone. This is useful to print received text message or contact
information.
• File Transfer: The phone is configured to transfer data wirelessly to a target device.
• Object Push: The phone is configured to wirelessly transfer information about
Pushes.
Configuring your Phone’s Connections
Your phone is wirelessly connecting to the Internet via a built in WAP browser.
Connection can be made via either one of three available WAP browsers: MEdia Net
wap1.x, MEdia Net wap2.x, AT&T MMS (MultiMedia Server), or AT&T IMS. Use this
menu to create and customize the profiles containing the settings for connecting
your phone to the network. You need these settings to use the web browser or send
MMS messages or e-mails. Although the active connection can be changed by the
user, it is recommended that this choice be made with the assistance of either the
retailer or customer service representative.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
3. Select Connectivity. Highlight Connections and press the Select soft key
or the key. Use the Up or Down Navigation key to highlight one of
key.
these options:
• MEdia Net wap1.x
• MEdia Net wap2.x
• AT&T MMS
• AT&T IMS
4. Press the Options soft key.
Note: The MEdia Net WAPs are pre-configured and can not be altered on this screen. The AT&T MMS
connection option can be edited, renamed, or deleted on this screen. Your phone is set up by default
for connecting to the network. If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not work properly.
Changing Your Settings 88
5. To create a new connection, press the Options soft key, select New, and
press the Select soft key or the
key.
- or -
6. To edit the existing AT&T MMS, highlight this entry, press the Options soft
key, select Edit, and press the Select soft key or the
key.
7. The following parameters are displayed:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP connection:
None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the network.
• Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or
Other.
• Home URL: enter the URL address of the page to be used as your homepage.
• Gateway address: (wap1.x only) enter the gateway address of the proxy server.
• Proxy address: (wap2.x and AT&T MMS) set the proxy server address and port.
• Linger Time (Sec.): set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
-
-
-
Static IP: specify if you want to manually enter an IP address. If you want the IP
address to be automatically assigned by the server, remove the check mark.
Local phone IP: enter the IP address obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
-
-
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
Traffic Class: select the traffic class.
Note: The WAP settings may vary depending on the service provider.
Configuring your Phone’s USB Connection
Your phone can connect to a PC via the USB cable (sold separately). The phone can
be configured to open launch a default application when an active USB connection is
detected.
1. Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
) appears on
89
Software Update
the phone.
2. When the Idle screen displays, press the Menu soft key.
3. Select Settings and press the Select soft key or the
key.
Select Connectivity. Highlight Select USB Mode and press the Select soft
key or the
key. Use the Up or Down Navigation key to highlight one of
these options:
• Media Player: sets the Media Player to launch as the default application when
a USB connection is detected. This is the default application.
• PC Studio: sets PC Studio to launch as the default application when a USB
connection is detected.
• Ask on Connection: requires the phone to present a “Select USB Mode”
pop-up which requires you to assign a default USB application.
4. With the application highlighted, press the Save soft key or the
key.
Configuring your IMS Settings
Your phone is wirelessly connecting to the Internet via a built in WAP browser.
Connection can be made via either one of three available WAP browsers: MEdia Net
wap1.x, MEdia Net wap2.x, AT&T MMS (MultiMedia Server), or AT&T IMS. Use this
menu to create and customize the profiles containing the settings for connecting.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
3. Select Connectivity and press the Select soft key or the
4. Select IMS Settings and press the Select soft key or the
key.
key.
key.
5. To enable the service, select Service and press the Select soft key or
the key.
• Select either On (to activate the IMS service) or Off (to deactivate the service) and
press the Select soft key.
Software Update
The Software Update feature enables you to use your phone to connect to the
network and upload any new phone software directly to your phone.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
3. Select Software Update and press the Select soft key or the
4. Press the key to continue the update process and follow the on screen
instructions.
key.
key.
Changing Your Settings 90
Application Settings
The Application Settings feature allows you to configure the functional parameters
for most of the on board applications. These applications are described in more
detail within other sections of this manual.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Application Settings and press the Select soft key or the
key.
4. Select the type of application which you want to change.
5. Press the Select soft key or the
key.
Video Share Settings
To enable the Alerts, Auto Record, and Service options for Video Share, use the
following steps.
1. From the Idle screen, press the
Menu key. Use the Navigation keys to
access the Settings menu, press
key.
2. Press the Down Navigation key to the Application Settings menu, and
press
3. Press the Down Navigation key to the Video Share Settings menu and
press . To access the following options, press the Select soft key.
.
• Alerts: allows you to turn On or Off the Video Share Alerts which displays a
message and a tone.
• Auto Record: allows you to turn On or Off the Auto Record which records the
Video Share call.
• Service: allows you to turn On or Off the Video Share service. (This option default
is On.)
4. Press the
key to save the option.
91
Security
Security
The Security feature enables you to restrict the use of your phone by the others and
to restrict the types of calls.
Various codes and passwords are used to protect the features of your phone.
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
key.
3. Select Security and press the Select soft key or the
The following options are available. Use the Up or Down Navigation key to
scroll to and set options.
Phone Lock
When the Phone lock feature is enabled, the phone is locked and you must enter the
4- to 8-digit phone password each time the phone is switched on. To change the
password has been entered, you can use the phone until you switch it off. The
following options are available:
• Off: you are not asked to enter the phone password when you switch on the phone.
• On: you are required to enter the phone password when you switch on the phone.
SIM Lock
When the SIM Lock feature is enabled, your phone only works with the current SIM.
You must enter the lock code to unlock the SIM so you can use a different SIM card.
• Once you have entered the lock code, you are asked to confirm your password.
Reenter your password and press the OK soft key.
PIN Check
When the PIN Check feature is enabled, you must enter your PIN each time you
switch on the phone. Consequently, any person who does not have your PIN cannot
use your phone without your approval.
Note: Before disabling the PIN Check feature, you must enter your PIN.
The following options are available:
• Off the phone connects directly to the network when you switch it on.
• On: you must enter the PIN each time the phone is switched on.
Lock Applications
Using this menu, you can lock the following categories:
Changing Your Settings 92
• Lock All
• Messaging
• My Stuff
• Recent Calls
• Address Book
• Calendar
• Note
• IM
• Tasks
Once you have locked the contents, you must enter the phone’s password to access
the associated menus.
FDN Mode
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict
your outgoing calls to a limited set of phone numbers.
The following options are available:
• Off: you can call any number.
• On: you can only call phone numbers stored in Phone book. You must enter your
PIN2. The following options are available:
• Full length entries or wild cards can be entered in to the FDN list.
• A full length number with a specific contact name can be entered into the FDN
list.
• Wildcard entries allow a range of numbers to be dialed with a single entry: ex.
555 – All dialed numbers that begin with 555 will be allowed. Numbers that do
not match the conditions in the FDN list will be restricted. Note: Entering an
asterisk (*) is not required for wild card entries.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Change Phone Password
The Change Phone Password feature allows you to change your current phone
password to a new one. You must enter the current password before you can specify
a new one.
Once you have entered a new password, you are asked to confirm it by entering it
again.
93
Reset Settings
Change PIN Code
This feature allows you to change your current PIN, provided that the PIN Check
feature is enabled. You must enter the current PIN before you can specify a new one.
Once you have entered a new PIN, you are asked to confirm it by entering it again.
Change PIN2 Code
The Change PIN2 feature allows you to change your current PIN2 to a new one. You
must enter the current PIN2 before you can specify a new one. Once you have
entered a new PIN2, you are asked to confirm it by entering it again.
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.
Reset Settings
You can easily reset your phone to its default settings. To reset your phone:
1. When the Idle screen displays, press the Menu soft key.
2. Select Settings and press the Select soft key or the
key.
3. Select Reset Settings and press the Select soft key or the
key.
4. The following options are available. Use the Up or Down Navigation key to
scroll to and set options. Choose from the following:
• All
• Phone Settings
• Display Settings
• Profiles
• Alarms
5. Press the
key to make your selection and press the OK soft key.
6. Enter your phone password, if prompted.
7. At the “Reset Settings?” prompt, press the Yes soft key to reset, or the
No soft key to cancel. Once your phone has been reset to its default
settings for those selected options, it will restart itself in order to
incorporate the new settings.
Memory Settings
You can easily check the amount of memory being used for storing data, such as
messages, media, calendar data, or contacts entries. You can also delete any
selected information from your phone:
1. When the Idle screen displays, press the Menu soft key.
Changing Your Settings 94
2. Select Settings and press the Select soft key or the
key.
3. Select Memory Settings and press the Select soft key or the
key.
4. The following options are available. Use the Up or Down Navigation key to
scroll to and set options. Choose from the following:
• Clear Memory
• Memory Status
Clearing Memory
Note: To completely remove any personal information stored on your device, see "Precautions for Transfer
1. Highlight Clear Memory and press the Select soft key or the
key.
2. Highlight All and press the
key to select all available categories.
You can remove the check mark by pressing the
key again. Selecting
All places a checkmark adjacent to every entry in the list.
- or -
3. Highlight a specific category and press the
key to select it.
4. Press the OK soft key.
5. Enter your password (if applicable) and press the Confirm soft key.
Depending on your phone’s security settings, you may be asked to enter
your password a second time.
6. At the Clear all memories? confirm screen, press the Yes soft key to
continue, or the No soft key to cancel.
7. When you are finished, press the
key to return to Idle mode.
Checking the Memory Status
1. Highlight Memory Status and press the Select soft key or the
key.
2. Highlight the storage category and the Select soft key or the
key. you
can choose from one of the following categories:
• Shared Memory
• Messaging
• My Stuff
• Calendar
• Task
• Note
• Address Book
95
Memory Settings
3. To view the contents of a category’s memory, use the Up or Down
navigation key to select the entry and press the Select soft key.
4. To delete all the entries in this category, highlight All and press the
key
to select the categories.
5. Press the Delete soft key.
6. At the Delete? confirm screen, press the Yes soft key to continue, or
the No soft key to cancel.
7. Enter your password (if applicable) and press the Confirm soft key.
Depending on your phone’s security settings, you may be asked to enter
your password a second time.
When you are finished, press the
key to return to Idle mode.
Changing Your Settings 96
Section 9: AT&T Mall
Topics Covered
•
•
•
•
•
•
The AT&T Mall topics covered in this section are shopping for Tones, Games,
Graphics, Multimedia, and Accessing the MEdia Home site.
Note: Prior to purchasing downloadable tones, graphics, games, or other applications, it is necessary to
setup an e-wallet account so that with every purchase, your account can easily be debited.
Shopping for Audio
The Shop Tones menu option allows you to shop for audio tones using the built-in
browser. You can download, record new, and save audio to either your Audio or
Music folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Tones menu option to launch the built-in browser and
select a file to download. Follow the on-screen options. The downloaded
files can be stored into either the Audio or Music folders found within the
My Stuff (Phone) location. Music Tone categories include:
• Featured Artists
• Answer Tones
• Search for a specific audio file by name
4. Select an audio file and press the
key.
5. When you are ready to purchase the audio file, press the Buy Now button
to charge your e-wallet account and complete the transaction.
97
Shopping for Games
Shopping for Games
The Shop Games menu option allows you to shop for games using the built-in
browser. You can download new games to your Games folder. To access this menu
option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Games menu option to launch the built-in browser and
select a game to download. Follow the on-screen options. The downloaded
files can be stored in the Games folder found within the My Stuff (Phone)
location.
4. Select a game entry and press the
key.
5. When you are ready to purchase the game, press the Buy Now button to
charge your e-wallet account and complete the transaction.
Shopping for Graphics
The Shop Graphics menu option allows you to shop for graphic images using the
built-in browser. You can download new images to your Graphics folder. To access
this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Graphics menu option to launch the built-in browser
and select an image to download. Follow the on-screen options. The
downloaded files can be stored in the Graphics folder found within the My
Stuff (Phone) location. These images can be used as wallpapers or
included into multimedia messages.
4. Select an image entry and press the
key.
• When you are ready to purchase the image, press the Buy Now button to charge
your e-wallet account and complete the transaction.
Shopping for Multimedia Content
The Shop Multimedia menu option allows you to shop for multimedia files (videos)
using the built-in browser. You can download new videos to your Videos folder. To
access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
AT&T Mall 98
3. Highlight the Shop Multimedia menu option to launch the built-in browser
and select a video file to download. Follow the on-screen options. The
downloaded files can be stored in the Video folder found within the My
Stuff (Phone) location. These files can be included into multimedia
messages or sent as attachment files to text messages.
4. Select an video file entry and press the
key.
5. When you are ready to purchase the file, press the Buy Now button to
charge your e-wallet account and complete the transaction.
Shopping for Applications
The Shop Applications menu option allows you to shop for application files using
the built-in browser. You can download the new applications to your Applications
folder. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the Shop Applications menu option to launch the built-in
browser and select an application to download. Follow the on-screen
options. The downloaded apps. can be stored in the Applications folder
found within the My Stuff (Phone) location. These files can be included into
multimedia messages or sent as attachment files to text messages.
4. Select an application entry and press the
key.
5. When you are ready to purchase the application, press the Buy Now button
to charge your e-wallet account and complete the transaction.
Accessing the MEdia Net Home
The MEdia Net menu option allows you to quickly access your MEdia Net homepage
using the built-in browser. This page gives you quick access to information such as
local weather, sports scores, horoscope information and quick links to the previously
mentioned shopping sites. To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight the MEdia Net Home menu option to launch the built-in browser
and launch this AT&T homepage.
99
Accessing AT&T Music
Section 10: AT&T Music
Topics Covered
•
•
•
•
•
•
•
•
•
•
AT&T Music is a music service which provides you access to Streaming Music,
Music Videos, Music store, Music communities, music applications, and a unique
MusicID application.
Accessing AT&T Music
1. When the Idle screen displays, press the
key.
2. Use the Down Navigation key to scroll through the list of available options.
Note: Audio files less than 300 KB are treated as ringtones, whereas audio files which are greater than
300 KB are stored in the Music Folder. A user can not set an MP3 file as a ringtone if it is larger than
300 KB.
Adding Music to your Handset
Music files (such as ringtones) can be added to your handset by using one or more of
the following methods:
• Download music and ringtones over the Cingular network directly to your device by
using the shopping for music feature.
• From your existing digital media collection thru Windows Media Player®.
• From our music store partners through the applicable music client.
AT&T Music 100
Note: If the Bluetooth feature is currently active on your handset, USB communication will not be available.
To transfer files to your handset, turn off the Bluetooth functionality (Settings > Connectivity >
Bluetooth).
Shopping for Music
AT&T Music can be used to shop for ringtones, Answer Tones™ and songs from
some of your favorite music stores.
1. When the Idle screen displays, press the
2. Highlight Shop Music and press the Select soft key or the
3. Use the Up or Down Navigation key to highlight your music store of choice
or Ringtones and press the Select soft key or the key.
key.
key.
4. From the Categories listing, highlight the desired entry and press the
key. Press the Back soft key to return to the previous page.
To exit the browser at any time, simply press the
key.
Transferring Music from the Digital Music Stores
www.cingular.com.
1. Using your computer, open your preferred WMDRM PC music management
client (i.e., www.napster.com).
2. Download the selected song to your library.
4. Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
the phone.
) appears on
5. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then shows your device. If the
detection occurs, skip to step 11.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
window on the PC screen, please follow steps 6 - 10.
6. When the Idle screen displays, press the Menu soft key.
7. Select Settings and press the Select soft key or the
key.
8. Select Connectivity and press the Select soft key or the
key.
101
Adding Music to your Handset
9. Use the Up or Down Navigation key to highlight Select USB Mode and
press the Select soft key or the
10. Use the Up or Down Navigation key to highlight Media Player and press
the Select soft key or the key.
key.
11. Highlight the song you wish to download to the handset.
12. Using your right mouse button, click on the highlighted song and select
Transfer Track(s) to Portable Device from the drop-down menu. This
step begins the download process.
Transferring Music using Windows Media Player
A USB cable, microSD card, and a current version of the Windows Media Player are
required for this procedure.
1. Open Windows Media Player on your computer (version 10.0 or higher).
2. Use the USB adapter cable (sold separately) to connect the handset to the
target PC. When an active connection has been established, a USB icon
(
) appears on the phone.
3. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then shows your device.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
4. From within the Windows Media Player application, click on the Sync tab.
Previously downloaded songs are then listed on the left side of the
application.
5. Choose the destination location for the media files. The SGH-A727 Phone
and SGH-A727 Card entries both appear in a drop-down list on the right
side of the screen. This selection determines whether the audio files will be
synchronized with the Phone or with the inserted memory card.
Note: If there are no items present in the playlist, click the Edit Playlist button and begin adding the music
files from among the various media categories.
6. Click on the checkmark boxes (to the left of the song entry) to select the
song you want to synchronize to your handset.
AT&T Music 102
7. Click the Start Sync button at the upper right corner of the application to
download the selected songs to your handset. A “synchronization in
progress” message appears on the application. Do not unplug the handset
during this process. Once complete, a Music folder appears below the
device entry on the right of the Sync tab.
8. It is now safe to unplug the USB connector from the handset.
Using the Music Player
The Music Player is a component of the built in Media Player which is an application
that can play music files. The music player supports files with extensions AAC,
AAC+, eAAC+, MP3, WMA, 3GP, MPEG, MP4, and M4A. Launching the Media Player
allows you to navigate within your Media Player - Music folders and select playback
material.
1. When the Idle screen displays, press the
key.
2. Highlight Music Player and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight a folder from the list:
• Last played: displays the songs that were recently played.
• All: provides a list of all uploaded music files which have been purchased or
downloaded from your computer. This can include ringtones, answer tones, and
music.
• Recently played: provides a list of the most recently played music files.
• Most Played: provides a list of the most played music files.
• Artists: provides a list of songs organized by artist names.
• Genres: provides a list of songs organized by music genres.
• Albums: provides a list of songs organized by album names.
• Composers: provides a list of songs organized by composer names.
• Playlists: provides a list of downloaded music playlists. These playlists provide
access to streaming music streams.
4. Press the Options soft key. Highlight Open and press the Select soft key or
the
Playing Music Transferred to the Handset
1. When the Idle screen displays, press the key.
2. Highlight Music Player and press the Select soft key or the
3. Select All and press the key to open the folder.
4. Use the Up or Down Navigation key to select the song you want to listen to
and press the Select soft key or the key.
key to begin playing the song.
key.
103
Multitasking
Playing Music through a Stereo Bluetooth Device
Your device supports the Stereo Bluetooth profile (A2DP) that when synched to a
stereo Bluetooth headset will play back music in stereo.
1. Pair your handset to a stereo Bluetooth device. For specific pairing
2. Press the
3. Highlight Music Player and press the Select soft key or the
4. Select All and press the key to open the folder.
key to display the main AT&T Music menu.
key.
5. Use the Up or Down Navigation key to select a song and press the
key
to play the song within the Media Player.
6. During playback, press the Options soft key. Highlight Play via >
Bluetooth stereo headset and press the
key. The headset will then
search for compatible stereo bluetooth devices.
7. From the list of compatible devices, select the previously paired bluetooth
headset and press the
headset.
key to begin listening to your song through the
Multitasking
The Multitasking option allows you to play the Music Player in the background
while performing other tasks on your phone. The music will pause when an incoming
call is accepted, and the music will resume when the call is ended. Music will also
continue to play when you receive a Text Message, Multimedia Message, or an
Instant Message.
Note: Playing music and pausing the music player uses the same amount of battery.
1. From the Idle screen, press the
the key.
key to start the Music Player. Press
2. Press the Options soft key and highlight Player Settings. Press the
key. Use the Up or Down Navigation key to highlight the Minimize Player
option. (The default setting is On).
3. Use the Left or Right Navigation key to select On and press the Save soft
key.
Using the Media Player while Multitasking
After the Music Player has been enabled, you can begin to listen to music while
performing other phone functions.
AT&T Music 104
1. From the Idle screen, press the
key to start the Music Player. Press
the
key. The following menu options are displayed.
• Last played
• All
• Recently played
• Most played
• Artists
• Genres
• Albums
• Composers
• Playlists
2. Highlight your selection and press the
key. Use the Up or Down
Navigation key to make your song selection from your list, and press the
key. The song will begin playing displaying the song title, artist name
and any additional information related to the song.
The Rewind
forward
(Left Navigation key) Pause
(Right Navigation key) icons are displayed above the soft key
(Center
key) and Fast
functions.
3. Press the Back soft key to show the list of songs. The
icon displays
next to the song currently playing.
4. To stop the song press the
.
Important!: When you are finished using the Multitasking function, you must press the
key to stop
the function to prevent the battery from losing its’ charge. Pausing the player will continue to
use the battery.
Using Playlists
Playlists are used to assign songs to a list of preferred media which can then be
grouped into a list for later playback. These Playlists can be created via either the
handset’s Media Player options menu or from within a 3rd party music application
(such as Windows Media Player) and then downloaded to the handset.
Note: The Music Player does not necessarily support all features of a particular file format nor all the
variations of those formats. The Music Player includes support for Windows Media Digital rights
Management (WMDRM) which allows you to play some purchased or subscription content. Copyright
protections may prevent some images, music (including ringtones) and other content from being
copied, modified, transferred or forwarded.
Creating a Playlist
1. Press the
key to display the main AT&T Music menu.
105
Using Playlists
2. Highlight Music Player and press the Select soft key or the
key.
3. Select Playlists and press the Options soft key.
4. Highlight Create Playlist and enter a unique name for the song list using
the keypad.
5. Press the Save soft key to store this playlist as a separate file within the
main Media Player directory. At this point the playlist is empty and must be
populated with a list of songs found on your handset.
Adding songs to a Playlist
1. Press the
2. Highlight Music Player and press the Select soft key or the
3. Highlight Playlists and press Options soft key. Highlight Open and press
the key. Highlight the previously created playlist and press the
key to display the main AT&T Music menu.
key.
Options soft key.
4. Highlight Open and press the
key. By default, this list is blank.
key.
key. The Playlist screen then lists all of
5. Press the Options soft key. Highlight Add and press the
6. Highlight Files and press the
the available music files on the handset.
7. To select the music files for addition to the current playlist, highlight the
entry and select it by pressing the
key. You can choose to add either
individual songs, multiple songs, or All available songs.
• All: Selects all of the available listed songs and marks them for addition to the
playlist.
8. Press the Add soft key and wait for the song to be added to the current
playlist.
Remove songs from a Playlist
1. Press the
2. Highlight Music Player and press the Select soft key or the
3. Highlight Playlists and press Options soft key. Highlight Open and press
the key. Highlight the previously created playlist and press the
key to display the main AT&T Music menu.
key.
Options soft key.
Note: The number of songs currently in that playlist are displayed below the playlist name.
4. Highlight Open and press the
5. Use the Up or Down Navigation key to select an audio file.
AT&T Music 106
key.
6. Press the Options soft key. Highlight Remove and press the
key.
7. Highlight Selected and press the key. The other option is to select All
which would remove every song from the current playlist.
8. At the “Remove?” prompt, press either the Yes soft key to confirm deletion
or No to cancel.
Importing a Playlist from a 3rd Party Application
1. Open Windows Media Player on your computer (version 10.0 or higher).
2. Use the USB adapter cable to connect the handset to the target PC. When
an active connection has been established, a USB icon (
the phone.
) appears on
3. Once the USB connection has been established, the handset displays
"Connected" and the computer screen then shows the A727 device.
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog
4. From within the Windows Media Player application, click on the Library
tab.
5. From the left side of the Library tab, click on All Music. The right side of
the page is then populated with all of the songs which the player has
previously found.
6. Right click on the song entry and select, Add to.. > Additional Playlists.
7. From the Add to Playlist dialog, click the New button and type in a unique
playlist name.
8. Click OK when you are done entering the new playlist name. The new
Windows Media playlist is then displayed within the My Playlist section of
the Library tab (left side).
9. Drag and drop the newly created playlist from the My Playlist section to
the A727-Phone or the A727-Card entry listed just above it. The A727-
Phone and A727-Card entries both appear on the left side of the screen.
Note: If there are no items present in the playlist, click the Edit Playlist button and begin adding the music
files from among the various media categories.
10. It is now safe to unplug the USB connector from the handset.
107
Using MusicID
Using MusicID
MusicID is an application which uses the onboard microphone to analyze a song
sample and then compare it to a remote database of songs. Once the application
completes the analysis of the song sample, it then provides you with the name of the
song, artist and album art as well as opportunities to buy related content.
1. When the Idle screen displays, press the
key.
2. Highlight MusicID and press the Select soft key or the
key. You are
then presented with a list of ID options:
• ID song!: begins the analysis of the song being sampled through the handset’s
microphone.
• manage IDs: provides a list of recently identified song and allows you to obtain
information about the song, delete the song, or send the Music ID as a link to
another phone number.
• help me out: provides you with on screen descriptions of several key MusicID
features.
• exit: allows you to exit the application and return to the main AT&T Music menu.
To exit the application at any time, simply press the
key.
Using ID song!
1. Highlight ID song! and press the
key.
2. Place the handset’s microphone up to the source of the song, which can be
from either a radio, stereo, or headset. The handset then begins to analyze
the audio signal. If a song match is found, the screen displays the Artist
Name, Track Title, and Album cover art.
3. To purchase the song (with ringtone and wallpaper if available), highlight
get:, and press the
key.
4. To share the song ID with another user, highlight Share ID press the
key. Enter the recipient’s phone number and press the ShareID! soft key.
Within a short time they will receive a message containing a Music ID link
to the song.
5. If the song can not be found, the handset displays a “Sorry, No Match Try
Again!” message. Press the newID! soft key and try analyzing the song
again.
To exit the application at any time, simply press the
Using Manage ID’s
key.
1. Highlight Manage ID’s and press the
key. The screen displays a list of
AT&T Music 108
the most recent successful song IDs which were made.
2. Highlight a song and press the Options soft key.
3. Highlight one of the following options and press the
key.
• ID Info: displays the Artist Name, Track Title, and Album cover art of the
identified song.
• Delete ID: deletes the selected song from the list of identified songs.
• New ID!: begins the song analysis process again. Hold the microphone to the
song source and wait for analysis.
To exit the application at any time, simply press the
Getting Help with Music ID
1. Highlight help me out and press the
key.
key to select a topic. The screen
displays a list of helpful topics related to the musicID application. These
topics cover:
• IDing a Song: provides information about the analysis process.
• Recommendations and More!: describes the process following the
successful identification of a song. You can choose to purchase the song and
wallpaper (if available) or send the musicID as a link to another phone number.
• Subscription: provides details about the general usability and monthly term
information.
• About Music ID: provides information about the Music ID software version.
Exiting from the Music ID Application
There are two ways to exit from the musicID application:
1. Highlight exit and press the
2. Exit the application at any time by simply pressing the
Streaming Music
key to select a topic.
key.
This service allows you to stream over 40 channels of commercial free music
through your handset.
Note: Since this product uses a large amount of data in its stream process, you should note that you are
responsible for all data charges incurred. It is recommended that you subscribe to a MEdia Max data
bundle so that you are not charged for data overages.
Note: MobiRadio does not work with Bluetooth. Periodically, the application will ask the customer to
confirm they are still listening to the stream.
1. When the Idle screen displays, press the
key.
2. Highlight Streaming Music and press the Select soft key or the
key.
109
Music Video
3. Press the Continue soft key to accept the terms of service and resume
your trial. You have only a few days to use the service before the trial
period expires. If at any time you wish to purchase a subscription to this
service, press the Menu soft key and press the Buy soft key then follow
the on screen prompts.
4. Press the Menu soft key and use the Down Navigation key to scroll
through the following list of available Menu options:
• Back: if you are already streaming a music station, this option allows you to
return to the main guide.
• Buy: if you have not already bought this streaming service, this option allows you
to purchase and subscribe to the full version of the application.
• Guide: launches the main MobiRadio page which lists the currently available
radio stations. Once the subscription has been purchased, this list increases
from those available only during the trial period, to more than 40 music stations.
• Help: provides some on screen information about some of the main MobiRadio
features and functions.
• About: provides information about the MobiRadio software version.
• Exit: allows you to exit from the Streaming Music application and return to the
main AT&T Music menu.
Streaming a Music Channel
1. Press the OK soft key to accept the terms of the trial period. You have only
a few days to use the service before the trial period expires. If at any time
you wish to purchase a subscription to the MobiRadio service, press the
Buy soft key and follow the on screen prompts.
2. Use the Up or Down Navigation key to highlight a radio station category
from the guide list and press the
3. Use the Up or Down Navigation key to highlight a specific radio channel
and press the key to begin the stream to your phone.
Music Video
key.
The Music Videos homepage is a component of the Cellular Video service. This page
provides you with links to some of the most popular multimedia content.
1. When the Idle screen displays, press the
key.
2. Highlight Music Video and press the Select soft key or the
key. You
are then taken to your CV Music homepage. This homepage provides you
with several sections of accessible content:
• Music: allows you to choose from some recently uploaded video clips from the
Music Choice channel, which can include news, cuts, and ringtone reports.
AT&T Music 110
• Music Channels: provides some general content categories from which to
begin searching for media: Cingular Sounds Live, Music Choice Premium, Music
Videos, MTV, VH1, CMT, and Hip Hop Official.
• Entertainment: exits from the Music Videos section of the homepage and
launches an entertainment page which provides further streaming multimedia
content.
• Cellular Video: exists from the Music Video application and launches the
Cingular Video homepage.
• MEdia Net: exists from the Music Video application and launches the MEdia Net
homepage.
• Help: provides basic on-line assistance which answers most of the common
issues users come across while using this feature.
3. Highlight the desired media clip or select from one of the available
categories and press the
key.
Music Video Options
The options for the Music Video page are identical to those options provided for
1. When the Idle screen displays, press the
key.
2. Highlight Music Video and press the Select soft key or the
key.
3. From the main Music Video homepage, press the Options soft key.
Viewing a Video Clip
1. Use the Up or Down Navigation key to highlight the video clip and press
the Select soft key or the
key.
2. After the stream has been buffered into memory, you can choose to either
Pause or play the content. Pressing the
key toggles the Play and
Pause functionality.
The Buzz
This service allows you to navigate through Top 20 chart songs (in a variety of
categories). Other features of this service include streaming entertainment news
about your favorite music artists, access to an artists main page (containing
discographies, ringtones, concert dates,etc..), concert information, games, and
setup options for your own personal billboard notifications.
1. When the Idle screen displays, press the
key.
2. Highlight The Buzz and press the Select soft key or the
key.
111
Music Community
3. Press the Trial soft key to accept the terms of the trial period. You have
only a few days to use the service before the trial period expires. If at any
time you wish to purchase a subscription to this service, press the Buy soft
key and follow the on screen prompts.
4. Enter an area code, phone number (without dashes), and Zip code into the
appropriate fields on the Customize screen. Use the Up or Down
Navigation key to switch between fields.
5. Press the Done soft key to accept and save your information.
6. Once the phone number has been successfully registered, press the OK
soft key to continue onto the main Billboard mobile menu where you are
given a list of categories to choose from:
• CHARTS: provides you with a top 20 list of popular Ringtones, and tunes such
as R&B/Hip Hop, Rock, Pop, Latin, Country, and Rap.
• NEWS & REVIEWS: provides you with links to some of the latest news about
your favorite artists.
• ARTISTS: features a personalized artist web page for an available artist which
includes a bio, discography info, ringtones, tour dates, etc..
• CONCERTS: allows you to search for a concert by using either the artist name,
venue, type, or city/state/zip information.
• GAMES: allows you to use your keypad to play an entertainment-based
guessing game by entering in names, dates, and places.
• MY BILLBOARD: allows you to refine your Billboardmobile experience by
configuring your text message preferences, personal settings, and alerts.
7. Exit the application at any time by simply pressing the
key.
Music Community
This Community is a place where you can find a listing of various fan sites that
provide sound clips, wallpapers, bios, discographies, and other information about an
artist.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight AT&T Music and press the Select soft key or the
key.
key.
3. Highlight Community and press the Select soft key or the
4. Use the Up or Down Navigation key to select a fan site and press the
key. These pages can contain the following information:
• Wallpapers: provides you with color graphic files which can be used as a
wallpaper on your handset. Highlight an entry and press the
key.
• Photos: allows you to view some artist-specific photos. Use the Next and Back
buttons to navigate through these pages.
AT&T Music 112
• Bio: provides a biographical description of the artist/band.
• Artist Info: provides more specific group member information.
• Discography: provides a description of the artist’s albums and their
corresponding release dates.
• Tour Dates: provides a listing of the artist’s current tour dates.
To exit the application at any time, simply press the
key.
113
Section 11: Cellular Video
Topics Covered
•
•
•
•
•
•
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access Internet and then upload media files directly to your phone.
These media files are displayed using the built-in Media Player. Cellular Video (CV) is
a media service which allows you to not only navigate to your favorite web sites but
stream media content (Weather, News/Sports highlights, etc..) directly to your
phone.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key. You
are then taken to your default Cellular Video homepage.
This homepage provides you with several sections of accessible content:
• My Favorites: allows you to choose from some recently uploaded video clips
from among the following media providers: CNN, ESPN, HBO Mobile Preview, or
Access Hollywood.
• Video Categories: provides some general content categories from which to
begin searching for media: TV to Go, Entertainment, Sports, News & Weather,
HBO Mobile, and Premium Channel.
• Customize Cellular Video: allows you to access the Cellular Video Settings
menu where you can configure most of the settings associated with Cellular
Video.
• Parental Controls: provides you with settings which can be configured to
restrict certain media content from being displayed on the phone.
• MEdia Net: exits from the Cellular Video application and launches the MEdia Net
homepage.
• Help: provides basic on-line assistance which answers most of the common
issues users come across while using this feature.
Cellular Video 114
3. Highlight the desired media clip or select from one of the available
categories and press the Select soft key or the key.
Cellular Video Options
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. From the main Cellular Video homepage, press the Options soft key to use
one of the following options:
• Go to: returns you to the main Cellular Video homepage.
• Go: lets you navigate Forward (next sequenced web page) or Backward (to the
previously visited web page) through pages in your browsing history.
• Reload: reloads the current page with updated information.
• Desktop View: changes the display mode of the browser.
• Page Size: change the page size of the displayed web page (Large, Normal, or
Small).
• Go to Homepage: takes you back at any time to the homepage of the Wireless
Web service provider.
• Add to Favorites: bookmarks the current page and marks it as a favorite site.
• View Favorites: accesses and displays the bookmarks assigned as favorite
web pages.
• Send URL: send the URL of the current page via either a message or to another
party via a Bluetooth device.
• Enter URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the OK soft key to go there directly.
• Copy URL via Message: send the URL of the current page to another party as
a message.
• Save: saves either the image of the current web page or the current page itself.
• Saved Pages: access the list of web pages you have saved.
• History: displays the list of web pages you have recently accessed.
• Advanced: allows you to change the following settings for the browser.
-
-
-
Clear Cache: deletes the information stored in the cache. The cache stores the
most recently accessed pages.
Empty Cookies: delete cookies. Cookies are pieces of personal information sent
to a web server while navigating the web.
Cookie Options: sets whether or not cookies are stored on your phone. If you
select Prompt, the phone will ask you to save the cookies on every page
requiring cookies.
-
-
-
Preferences: changes the settings for the web browser to suit your preference.
Certificates: accesses certificate information from your phone.
Page Details: displays the properties for the currently active web page.
115
Media Clip Options
-
-
Browser Settings: selects a connection profile to be used when connecting to
the Internet.
About Browser: displays the access version and copyright information about
the browser.
Media Clip Options
With the media currently active on the phone (either playing or paused), press the
Options softkey to open a list of the following streaming media options.
Tip: Within the clips listed in the My Favorites section of your main CV homepage, highlight the description
and then press the
key to begin the stream.
Pause/Resume
This feature allows you to toggle the state of the current video between being
Paused or Resuming playback.
Stop
The feature stops the current media, exits the media player and returns you to the
main Cellular Video homepage.
Jump to track time
This feature pauses the current media content and displays a “Jump to track time”
pop-up which allows you to enter an Hour, Minute, and Second value which
corresponds to the media’s timeline. If, as an example, the content is three minutes
long, entering a value of: 00:01:30, would cause the Media Player to begin replaying
the content from its half-way point.
1. Use your keypad to enter a value for the Hour, Minute, and Seconds.
2. Press the Jump soft key to cause the Media Player to resume playback at
that value on the clip’s timeline
- or -
3. Press the Cancel soft key to go back to your media clip and resume
playback from its previous location.
Properties
Displays a Media Player window which gives file specific information such as title,
and Duration.
Cellular Video 116
Settings
This feature pauses the content and navigates you to the Player Settings menu
where you can configure the Media Player’s Volume setting.
1. Use the Up or Down Navigation key to increase/decrease the current
volume setting for the player while in Portrait mode. Use your Left or Right
Navigation key to increase/decrease the current volume setting for the
player while in Landscape mode.
2. Press the Save soft key to save your changes
- or -
3. Press the Back soft key to resume your media playback without saving
your changes.
Cellular Video Settings
This feature allows you to configure the current server profile being used by the
Landscape
This features rotates the streaming media clip to appear in a landscape orientation.
The default orientation is a portrait orientation.
This functionality is also enabled from the main Landscape soft key.
Using the Video Categories
This grouping of media categories provides access to an additional listing of
streaming media. Where the previous Favorites list of media stream can be user
edited and updated, this list of categories is defined by Cellular Video’s homepage
and can not be changed.
Viewing a Video Clip
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
3. Use the Up or Down Navigation key to highlight the video clip from within
the Favorites section and press the Select soft key or the key.
4. After the stream has been buffered into memory, you can choose to either
key.
Pause or play the content. Pressing the
key toggles the Play and
Pause functionality.
117
Customizing Cellular Video
Customizing Cellular Video
Updating the Favorites List
The list of media providers which appear in the Favorites section of the Cellular
Video homepage can be edited and changed by the user.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight the Edit button from the
upper-right of the homepage (adjacent to the My Favorites title) and press
the Select soft key or the
4. From the Customize Cellular Video - Options listing, highlight Edit My
Favorites and press the Select soft key or the key.
key.
5. Navigate to the Add to Favorites section of the page and highlight one the
additional streaming media channels which are not currently in your
Favorites list (ex: Cartoon Network).
6. Press the Options soft key. Highlight Add to Favorites and press the
Select soft key or the
key.
Adding a Video Alert
When new media is available for upload to your phone (such as breaking news), you
can set your phone to notify you of the new available content.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight the Customize Cellular
Video button from the bottom of the homepage and press the Select soft
key or the
4. From the Customize Cellular Video - Options listing, highlight My Video
Alerts and press the Select soft key or the key.
key.
5. Navigate to the Add to My Alerts section of the page and highlight one the
available services (ex: Breaking News).
6. Press the Options soft key. Highlight Add to Favorites and press the
Select soft key or the
key.
Cellular Video 118
My Purchases
The Cellular Video homepage can be used to shop for streaming multimedia content.
The My Purchases section can help keep track of your purchase history and view
any new resale products.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight the Customize Cellular
Video button from the bottom of the homepage and press the Select soft
key or the
4. From the Customize Cellular Video - Options listing, highlight My
Purchases and press the Select soft key or the key.
5. Highlight Purchase History and press the Select soft key or the
key.
key.
This provides you with an on screen listing of your “to date” purchase
history for media content.
6. Highlight My Account and press the Select soft key or the
key. This
provides you with an on screen description of your account details.
Parental Controls
Your phone can be configured to block both purchased and streamed media content.
Before filtering, you must first establish a pin/password and a contact e-mail
address. Once those have been established, you can the two available filter options:
Content Filters and Purchase Blocker.
• Content Filtering let you restrict access to inappropriate content both on and
outside of MEdia Net.
• Purchase Blocking lets you restrict the ability to buy ringtones, downloads,
games, etc.., from this phone.
Setting up Parental Control
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight the Customize Cellular
Video button from the bottom of the homepage and press the Select soft
key or the
4. From the Customize Cellular Video - Options listing, highlight Parental
Controls and press the Select soft key or the key.
key.
119
Parental Controls
5. Highlight the OK button and press the
key to access the MEdia Net
parental setup fields.
6. From the Parental Control Setup screen, use your keypad to enter
information into the following fields: PIN Code, Re-enter PIN code,
contact email address.
7. Use you Navigation keys to highlight the Save button and press the
key. Allow a few minutes for your information to be received and accepted
by MEdia Net. You can then use this information to activate the parental
filters.
Configuring the Filters
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Cellular Video and press the Select soft key or the
key.
3. Use the Up or Down Navigation key to highlight the Customize Cellular
Video button from the bottom of the homepage and press the Select soft
key or the
key.
4. Highlight the OK button and press the
key.
5. When prompted, enter the PIN and e-mail address which was registered
with MEdia Net in the previous section.
6. Highlight Content Filters and press the Select soft key or the
key.
7. Highlight the On button and press the Select soft key or the
key to
toggle the On/Off state.
8. Highlight Purchase Blocker and press the Select soft key or the
key.
9. Highlight the On button and press the Select soft key or the
key to
toggle the On/Off state.
10. Press the Back soft key or the
key. This activates.
Cellular Video 120
Section 12: Using the Applications
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Note
Timer
The on-board applications (such as camera, camcorder, calendar, and alarms) can
be supplemented with additional applications which can be purchased via the AT&T
Mall.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
key.
121
Shop Applications
Shop Applications
1. Press the Select soft key or the
key.
on downloading applications.
Using the Camera
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.
1. From the right side of the phone, press and hold the Camera key.
2. Adjust the image by aiming the camera at the subject.
3. Press the
key to take the photo.
4. Once the photo has been taken, press the
key to attach the photo
directly to a message.
Note: Your camera produces photos in JPEG format. The number that appears in the upper-right of the
screen indicates the current number of pictures have been saved to the selected media and an
approximate number of total pictures which can be taken at the current image size.
5. Or before taking the photo, press the Options soft key to access camera
options.
Camera Options
• Take Photo: allows you to take a photo.
• Shooting Mode: allows you to take a photo in various modes. Once you change
the mode, the corresponding indicator appears at the top right of the display.
• Single Shot: allows you to take a single photo and view it before returning to the
shooting mode. Press the Select soft key to set the camera to either:
-
-
Take & Review
Take & Return
• Multi-shot: allows you to take a succession of consecutive photos. Press the
Select soft key to set the number of shots to either:
-
-
-
6 Shots
9 Shots
15 Shots
• Mosaic Style: allows you to take up to four photos and then have them grouped
together into a single final photo. Press the Select soft key to set the size of
these mosaic photos to either:
-
2x2
Using the Applications 122
-
3x3
• Effects: allows you to choose a custom color tone for your photo. Choose from the
following Effects Mode.
• No Effects: automatically adjust the picture for the best quality available.
• Black & White: removes all color and display the picture as black and white.
• Sepia: adds a sepia tint to the picture. This is the common orange tint that was
popular in early photography.
• Negative: changes the image to a negative image display.
• Frames: allows you to choose a custom frame border for your. Choose from one of
the 20 available frames.
• Timer: allows you to set a time delay before the camera takes the photo.
• Off
• 3 seconds
• 5 seconds
• 10 seconds
• Record Video: allows you to switch from taking a photo to shooting a video clip
using the camera’s camcorder setting.
• Go to Graphics: allows you to access the list of taken photos. Press the Options soft
key to view the following options for these graphics:
• View: allows you to view the photo.
• Send: allows you to attach the graphic to a message, send it to a Bluetooth
device, or the ImageStation® service.
• Set as: allows you to set the currently selected graphic to be displayed on the
Main Display or assigned to a Caller ID.
• Move: allows you to move either a Selected or Multiple graphics to one of the
My Stuff (Phone) folders.
• Copy: allows you to make a copy of the Selected or Multiple graphics and then
send it to one of the My Stuff (Phone) folders.
• Delete: allows you to delete either Selected or Multiple graphics.
• Rename: allows you to rename Selected graphics.
• Create Folder: allows you to create a new folder and then populate it with either
Selected or Multiple graphics from the list.
• Sort by: allows you to sort the list of graphics by either: Date, Type, Name, or
Size.
• Bluetooth Visibility: allows you to either Enable or Disable graphics visibility to
Bluetooth devices.
• Print via: allows you to make a selected graphic printable by either USB or
Bluetooth printer.
• Lock: allows you to lock the photo.
• Properties: allows you to view the properties of a photo.
123
Using the Camera
• Camera Settings: allows you to customize your camera settings. Choose the
following options:
• Size: allows you to set the image size. The icon for the selected image size
appears on the capture screen.
• Quality: allows you to select the picture quality setting. Choose Super Fine,
Fine, Normal, Low, or Economy.
• Display: allows you to choose between Actual Screen, Full Screen &
Guideline, Full Screen & Indicator, or Full Screen.
• Scene Program: allows you to set the lighting for the photos. Choose Normal
or Night-time landscape.
• Shutter Sound: allows you to select a shutter tone sound when taking a photo.
• Multi Shot Speed: allows you to set the speed between each photo taken using
a multi shot session. Choose Low, Normal, or High.
• White Balance: allows you to set the white balance for the camera. Choose
Auto, Daylight, Cloudy, Incandescent, or Fluorescent.
• Default Storage: allows you to set a default storage location for the photos
taken on your phone. Choose Phone or Memory Card.
• Default Name: allows you to set a default prefix name for the photos taken on
your phone.
• Camera Shortcuts: allows you to see the shortcut keys associated when using the
camera.
1. Press the Back soft key to return to the picture viewer.
2. You can use the keypad to quickly change the camera options using the
camera shortcut keys.
• Video Share: allows you to make a Video Share call. (This option will only display if
you have the Video Share service.)
Camera Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
takes photo.
adjust the image brightness (Left/Right).
zooms in or out (Up/Down). Not allowed if the picture size is
set to its maximum value.
switches the handset between camera and camcorder mode.
Using the Applications 124
changes the image size.
changes the image quality.
changes the camera shooting mode.
changes the color tone of the photo.
within the camera mode, this loads frame option #20 on screen.
sets a time delay (Off, 3, 5, or 10 seconds).
switches to the Photo Album.
adds a quadrant overlay to help you position your shot.
Camera Options after a Photo is Taken
After you have taken a photo, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the
key. The
following options are available:
• Send: allows you to attach the graphic to a Message, send it to a ImageStation®, or
to a Bluetooth device.
• Delete: allows you to delete the photo you have taken.
• ViewFinder: allows you exit from the picture options menu and return to the
camera’s viewfinder.
• Set as: allows you to set the photo as your wallpaper on your Main Display or set the
photo as a Caller ID for a contact.
• Edit Photo: allows you to edit the photo by bringing up a set of options consisting of:
• Save as allows you to change the name of the image.
• Effects (Black and White, Sepia, Negative, Milky, Lighting, Crayon Pastel, Oil
Paint, Blur, Despeckle, or Sharpen)
• Partial effects (Partial Blur or Redeye Repair)
• Adjust (Brightness, Contrast, or Color)
• Transform (Resize, Rotate, or Flip)
• Crop allows you to move the Navigation key to select the portion of the image you
want to crop.
• Insert (Frames, Cliparts, Emoticon or Text)
• Set as (a wallpaper for Main Display, or assign it to a Caller ID)
• Send via Multimedia, via Bluetooth, and ImageStation®
125
Using the Camcorder
• Print via (USB or Bluetooth)
• Rename: allows you to rename the photo.
• Go to Graphics: allows you to view photos you have previously taken.
• Lock: allows you to lock the photo to prevent deletion.
• Bluetooth Visibility: allows you to make the photo visible to Bluetooth devices.
• Properties: allows you to view the properties for this photo.
Accessing the Photos Folder
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, and press the Select soft key or the
3. Highlight Graphics and press the key.
4. Use the Up or Down Navigation key to select a photo.
key.
5. To open the photo, press the
Using the Camcorder
Shooting Video
key.
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you have provide
your subject with sufficient light by having the light source behind you.
1. From the right side of the phone, press and hold the Camera key.
2. Press the
key to switch to the camcorder.
3. Adjust the image by aiming the camera at the subject.
4. Press the
key to begin shooting video.
5. Press the
key to stop the recording and save the video file to your
My Stuff folder.
- or -
Before shooting, press the Options soft key to access camcorder options.
6. Once the file has been saved, press the
key to play back your video for
review.
Camcorder Options
1. Press the
key to access the camcorder options.
• Record Video: allows you to begin recording a video segment.
• Effects: allows you to choose a custom color tone for your video. Choose from
the following Effects Mode.
-
No Effects: automatically adjust the picture for the best quality available.
-
Black & White: removes all color and display the picture as black and white.
Using the Applications 126
-
-
Sepia: adds a sepia tint to the picture. This is the common orange tint that was
popular in early photography.
Negative: changes the image to a negative image display.
• Timer: allows you to set a time delay before the camcorder begins to shoot
video.
-
-
-
-
Off
3 seconds
5 seconds
10 seconds
• Take Photo: allows you to switch from shooting a video clip to taking a photo.
• Go to Video: allows you to access the list of videos stored within the Video
folder. Press the Options soft key to view the following options for these clips:
-
Play: allows you to play the video clip.
-
Send: allows you to attach the multimedia file to a message or send it to a
Bluetooth device.
-
-
Move: allows you to move either a Selected or Multiple videos to one of the
My Stuff (Phone) folders.
Copy: allows you to make a copy of the Selected or Multiple videos and then
send it to one of the My Stuff (Phone) folders.
-
-
-
Delete: allows you to delete either Selected or Multiple multimedia videos.
Rename: allows you to rename Selected videos.
Create Folder: allows you to create a new folder and then populate it with either
Selected or Multiple multimedia files from the list.
-
-
Sort by: allows you to sort the list of files by either: Date, Type, Name, or Size.
Bluetooth Visibility: allows you to make either a Selected or Multiple videos
visible to Bluetooth devices.
-
-
Lock: allows you to lock the video file to prevent deletion.
Properties: allows you to view the properties of a video file.
• Camcorder Settings: allows you to customize your camcorder settings.
Choose the following options:
-
Recording Mode: allows you to set the maximum allowable recording time.
Choose Multimedia Message, 10 Seconds, 30 Seconds, For Full Memory,
or Video Share.
-
-
Size: allows you to set the video size. Choose 176 x 144 or 128 x 96.
Quality: allows you to select the video quality setting. Choose Fine, Normal,
Low, or Economy.
-
-
Display: allows you to set the image size to Actual Screen or Full Screen.
Audio Recording: allows you to choose whether to use audio in your video.
Choose between On or Off (microphone is muted).
-
White Balance: allows you to set the white balance for the camcorder. Choose
Auto, Daylight, Cloudy, Incandescent, or Fluorescent.
127
Using the Camcorder
-
-
Default Storage: allows you to set a default storage location for the videos shot
by your phone. Choose Phone or Memory Card.
Default Name: allows you to set a default prefix name for the videos shot by
your phone.
• Camcorder Shortcuts: allows you to see the shortcut keys associated when
using the camcorder.
• Video Share: allows you to make a Video Share call. (This option will only
display if you have the Video Share service.)
2. Press the Back soft key to return to the picture viewer.
3. You can use the keypad to quickly change the camera options using the
camera shortcut keys.
Camcorder Shortcuts
Shortcut keys allow you to change options using your keypad, Navigation keys, and
Volume key in capture mode. The following options are available.
shoots video.
adjust the image brightness (Left/Right).
zooms in or out (Up/Down).
switches the handset between camera and camcorder mode.
changes the video size.
changes the video quality.
changes the recording mode.
changes the effects used on the video.
within the camcorder mode, this toggles the microphone
On/Off (mute).
sets a time delay (Off, 3, 5, or 10 seconds).
opens the Video folder where the videos are stored.
Using the Applications 128
changes to full screen view or original screen view.
Camcorder Options after a Video is Taken
After you have shot a video, you can use various options by pressing the Options
soft key. Highlight an option and press the Select soft key or the
following options are available:
key. The
• Play: uses the Media Player to view the video segment.
• Send: allows you to attach the video to a Message or send it to a Bluetooth device.
• Delete: allows you to delete the video you have shot.
• ViewFinder: allows you exit from the video options menu and return to the
camcorder’s viewfinder.
• Rename: allows you to rename the video file.
• Go to Video: allows you to access the list of videos stored within the
Video folder.
• Lock: allows you to lock the video file to prevent deletion.
• Bluetooth Visibility: allows you to make the video visible to Bluetooth devices.
• Properties: allows you to view the properties for this video file.
• Player Settings: allows you to adjust the Media Player’s playback Volume level (0-5).
Accessing the Video Folder
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, and press the Select soft key or the
3. Highlight Video and press the key.
4. Use the Up or Down Navigation key to select a video file.
key.
5. To play the video, press the Select soft key or the
key. The file is
played in the Media Player application.
Media Player
This feature allows you to:
• Access both local and streaming music, video, or playlists and then play then
through a built in Media Player.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, press the Select soft key or the
key.
3. Highlight the Applications folder and press the Options soft key.
4. Highlight Media Player and press the Select soft key or the
key.
129
Record Audio
Record Audio
Record Audio allows you to record voice memos. It also allows you to send your
audio clip to other people as an attachment of an MMS message. Recording time is
limited to free memory space available.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, press the Select soft key or the
key.
3. Highlight the Audio folder and press the Options soft key.
4. Highlight Record Audio and press the Select soft key or the
key.
5. To start recording, press the
key. Record a memo by speaking into the
microphone.
6. Press the Stop soft key to stop the recording or pause the recording by
pressing the key.
If the recording time expires, the message is automatically saved. Press
the Options soft key to display the following options:
• Play: allows you to play the memo.
• Record: allows you to save the current memo and begin another session.
• Send via: allows you to send your memo to other people by using Messages or
to a Bluetooth device.
• Set as: allows you to set the audio file as a voice call ringtone or a specific
caller’s ringtone.
• Delete: allows you to delete the memo.
• Rename: allows you to change the memo’s name.
• Bluetooth Visibility: allows you to make the audio file visible to a Bluetooth
device.
• Lock: allows you to lock the Audio file.
• Properties: displays the Name, Size, and Format of the voice memo.
• Record Audio Settings: allows you to setup a recording preset: Default Name
and Recording Time (1 min, 2 min, 3 min, 4 min, 5 min, 60 min, or Limit for
MMS)
7. To save these changes, press the Save soft key.
8. To exit, press the Back soft key or the
key.
Using the Applications 130
Recorded Audio
This menu shows a list of saved voice memos. When a voice memo is recorded and
saved, it is stored in the Recorded Audio folder. To access this menu use the
following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Highlight My Stuff, and press the Select soft key or the
3. Highlight Audio and press the key.
key.
4. Use the Up or Down Navigation key to select a recorded memo.
5. A list of voice memos displays. To play a recording, press the Select soft
key or the
6. To exit, press the Back soft key or the
Alarms
key.
key.
This feature allows you to:
• set the alarm to ring at a specific time.
• set the phone to switch on automatically and ring the alarm even if the phone is
switched off.
To set the alarm:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
key.
4. Highlight Alarms and press the Select soft key or the
key. The
following options display:
• Wake-up Alarm: the alarm rings to wake you up at the specified time.
• Alarm 1: primary alarm setting.
• Alarm 2: secondary alarm setting.
• Alarm 3: third alarm setting.
• Alarm 4: fourth alarm setting.
• Auto Power-up: the alarm rings even when the phone is turned off.
5. Select an alarm type and press the Options soft key or the
key. Set the
following options:
• Alarm Activation: Use this to activate/deactivate this feature (On/Off). The only
way to edit the remaining fields is to select On.
• Alarm Time: use the alphanumeric keypad enter a time for the alarm to sound.
131
Alarms
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & Date" on page 80.
• Alarm Type: press the
key to select a new type of alert notification (Melody,
Increasing Melody, Vibration, Vibration then Melody, Vibration & Melody, or
Vibration & Increasing Melody)
• Alarm Tone: press the
folders.
key to select a tone from one of the My Stuff
• Alarm Volume: press the Left and Right Navigation key to adjust the volume
level (1-7).
• Alarm Day: press the
key to access the Recurrence menu. Use the Up or
Down Navigation key to highlight a occurrence of the day(s) you wish your alarm
to sound. Press the
save your settings.
key to select the day entry. Press the OK soft key to
• Snooze: use this option to set the snooze feature for the alarm (Off, 1 Min.,
3 Min., 5 Min., 7 Min., or 10 Min).
• Repeat: use set the number of times this alarm type can be repeated (1 Time, 2
Times, 3 Times, 5 Times, or 10 Times). Snooze must be active for this feature to
be enabled.
6. Press the
key to save these changes.
Note: To stop the alarm when it rings, press any key.
Note: Press OK soft key to turn off the alarm.
Setting Auto Power Alarms
You can set the phone to ring the alarm when the time for an alarm comes, if the
phone is switched off.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
key.
4. Highlight Alarms and press the Select soft key or the
key. Select Auto
Power-up.
5. Using the Up or Down Navigation key, highlight On and press the Save soft
key or the key to activate the Autopower feature.
If the menu option is set to Off, and the phone is switched off at the
specified time, the alarm does not ring.
Using the Applications 132
6. When you have finished, press the
Calendar
key.
The calendar feature allows you to view the Month, Week, and Day layout views. You
can also create an Appointment, Anniversary, Holiday, Important, or Private entries. It
also shows any Missed Alarm Events that have occurred. To access the Calender
menu, use the following steps:
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
4. Highlight Calendar and press the Select soft key or the
key.
key.
5. Press the Options soft key. Highlight Create and the entry (Appointment,
Anniversary, Holiday, Important, or Private).
6. Press the Select soft key or the
key. The following options are
available:
Appointment
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
4. Highlight Calendar and press the Select soft key or the
5. Press the Options soft key. Highlight Create, select Appointment, and
press the Select soft key or the key to use the following options:
key.
• Title: enter a title for this appointment (up to 15 characters).
• Details: enter a description for this appointment (up to 100 characters).
• Start Date: enter a date for this appointment to begin.
• Start Time: enter a time for this appointment to begin. Use the Right Navigation
key to select AM or PM for the start time of the scheduled event and press the
Select soft key.
• End Date: enter a date for this appointment to end.
• End Time: enter a time for this appointment to end. Use the Right Navigation
key to select AM or PM for the start time of the scheduled event and press the
Select soft key.
• Location: enter a location description for this appointment (up to 15 characters).
133
Appointment
• Alarm: allows you to set an alarm for this event. Press the
key to select this
option. Once selected, all remaining alarm settings are enabled.
-
Before: allows you to the amount of time (minutes, hours, days) before your
appointment, you wish the alarm to sound.
• Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
• Repeat: allows you to set an the number of repetitions allowed for this
appointment (Daily, Weekly, or Monthly). Press the
key to select this option.
Once selected, all remaining alarm settings are enabled.
-
Every: allows you to set an the number of times the entry is repeat in the
selected time frame.
• Except Weekends: allows you to exempt non-work days (weekends) from the
appointment schedule.
• Until: allows you to set as duration for this appointment by assigning an
expiration time (Disable, After 1 Month, After 1 Year, After 2 Years, or
After 3 Years).
6. When you have finished, press the
key to save this new appointment
entry.
Anniversary
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
key.
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
4. Highlight Calendar and press the Select soft key or the
5. Press the Options soft key. Highlight Create, select Anniversary, and
press the Select soft key or the key to use the following options:
key.
• Occasion: enter a title for this occasion (up to 100 characters).
• Date: enter a date for this anniversary to begin.
• Alarm: allows you to set an alarm for this event. Press the
key to select this
option. Once selected, all remaining alarm settings are enabled.
-
-
-
Before: allows you to the amount of time (day, week) before your appointment,
you wish the alarm to sound.
Alarm Time: allows you to enter a time for the alarm to begin notifying you of
the occasion. Use the Right Navigation key to select AM or PM.
Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
Using the Applications 134
• Repeat Every Year: allows you to set whether this entry is repeated on a yearly
basis. Press the
key to select this option. Once selected, all remaining alarm
settings are enabled.
6. When you have finished, press the
key to save this new anniversary
entry.
Notes: The remaining Calendar entry types (Holiday, Important, or Private entries) contain similar fields and
use similar creation procedures.
Event Options
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
key.
4. Highlight Calendar and press the Select soft key or the
key.
5. Select a day containing a Calendar entry and press the
key. If the
selected day has one or multiple Calendar entries, those are then displayed
in a list.
6. Highlight an entry and press the Options soft key to use one of the
following Calendar entry options:
• View: this option allows you view the details for a selected event.
• Create: this option allows you to add an additional event to the selected day(s).
• Send: this option allows you to send the information of the event to another party
via either a Multimedia message or Bluetooth device.
• View Mode: this option allows you view the Calendar entries in one of two ways:
Weekly View (one week at a time) or Month View (one month at a time).
• Event List: this option allows you view a list of all currently active events by type
(Appointment, Anniversary, Holiday, Important, or Private).
• Delete: this option allows you to delete the event from the calendar.
• Save to My Stuff: this option allows you to save the event to your My Stuff
folder.
• Print via Bluetooth: this option allows you to print the details of the event on a
Bluetooth compatible printer.
• Settings: this option allows you to configure the Calendar’s Starting Day and
Default View Mode.
• Missed Alarm Event: this option displays any missed events.
• Memory Status: this option displays a list of the different Calendar event
categories along with the memory allocation for each.
135
Tasks
Viewing an Event
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
key.
4. Highlight Calendar and press the Select soft key or the
key.
The calendar displays with today date highlighted.
5. Select the date of the event (s) you want to view and press the
key or
use the Navigation keys to move to the date with an assigned event.
Note: The icon categories displayed at the bottom display any events scheduled for the day you selected.
6. Press the Up or Down Navigation key to scroll to the previous or next
event.
7. When you have finished, press the
key.
Tasks
This menu option allows you to create a “to do” entry of tasks which are created in a
similar fashion to previously described Calendar entries.
1. When the Idle screen displays, press the Menu soft key.
2. Select My Stuff and press the Select soft key or the
3. Using the Up or Down Navigation key, highlight Applications and press
the key.
4. Highlight Tasks and press the Select soft key or the
5. Press the Options soft key. Highlight Create, and press the Select soft key
or the key to use the following options:
key.
key.
• Title: enter a title for this task (up to 15 characters).
• Task: enter a description for this task (up to 100 characters).
• Start Date: enter a date for this task to begin.
• Due Date: enter a date for this task to end.
• Alarm: allows you to set an alarm for this event. Press the
key to select this
option. Once selected, all remaining alarm settings are enabled.
-
before: allows you to the amount of time (day, week) before your appointment,
you wish the alarm to sound.
Using the Applications 136
• Alarm Time: enter a time for this task to begin. Use the Right Navigation key to
select AM or PM for the start time of the scheduled event and press the Select
soft key.
• Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the
key to select this audio file.
• Priority: allows you assign the task a priority (1, 2, or 3).
6. When you have finished, press the
key to save this new appointment
entry.
Note
This option allows you to create notes to add to your events.
1. Highlight Note and press the Select soft key or the
key.
2. A blank New Note screen displays. Press the Options soft key. Highlight
Create, and press the Select soft key or the key.
3. Enter your text and press the Options soft key and then the Save soft key.
Calculator
With this feature, you can use the phone as a calculator. The calculator provides the
basic arithmetic functions; addition, subtraction, multiplication, and division.
1. Highlight Calculator and press the Select soft key or the
key.
2. Enter the first number using the numeric keys.
Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays.
3. Enter the operation for your calculation by pressing the Navigation keys,
according to the illustration on the display.
4. Enter the second number.
5. To view the result, press the
key.
Tip Calculator
With this feature, you can use the phone to calculate the amount of money left as a
tip based on parameters such as: total bill amount, tip percentage, and number of
members in your party.
1. Highlight Tip Calculator and press the Select soft key or the
key.
2. Enter the values into the appropriate fields by using the numeric keys:
• Bill
• Tip(%)
• Tip($)
137
Converter
• # paying
Note: To include a decimal point by pressing the
key.
3. The remaining fields indicate:
• Tip($): the amount of the tip based on the figures entered.
• You pay: your share of the total check amount. This value is based on the figure
entered within the # paying field.
Converter
The conversion menu provides the following conversion categories:
• Currency
• Length
• Weight
• Volume
• Area
• Temperature
ᮣ
Highlight Converter, highlight the function, and press the Select soft key
or the key.
World Time
World Time allows you to view the time of day or night in another parts of the world.
World displays time in the 30 different time zones around the world.
1. Highlight World Time and press the Select soft key or the
key.
2. Press the key to set the city or area as the new time zone. The
displayed time will shift to reflect the time zone selected.
3. Use the Left or Right Navigation keys to browse cities and times.
Note: If the selected area is in Daylight Savings Time (DLS) area, you must press the Options soft key and
select Daylight Saving. If the area does not have DLS, uncheck this option.
Timer
You can use this menu to set a countdown timer. To enable the Timer, use the
following options:
1. Press the Set soft key to enter the length of time.
2. Enter the time and press the OK soft key.
3. Press the
key to start the timer. Press the
key to stop the timer.
Using the Applications 138
Accessing the MEdia Net Homepage
Section 13: MEdia Net and WAP
Topics Covered
•
•
•
•
•
•
•
•
•
Your phone is equipped with a WAP (Wireless Application Protocol) browser which
allows you to access the Internet. This section explains how to access the WAP
services of your service provider and navigate the WAP browser.
Accessing the MEdia Net Homepage
1. In Idle mode, press the
key to launch the WAP browser. You can also
press the Menu soft key to access menu mode and highlight MEdia Net
and press the Select soft key or the
key.
2. Select MEdia Net and press the Select soft key or the
key. Your phone
is connected to the network and loads the MEDia Net homepage. The
content of the start-up homepage contains the following selections:
• Search field: allows you enter a text string into the field and then search the
MEdia Net database for matches. Once you have entered a word, press the
Right Navigation key to select the Search button and press the
begin your search.
key to
• My Links: provides you with quick access to your those sites which you have
setup in this category. Highlight one of these entries and press the
launch that web page.
key to
MEdia Net and WAP 140
• Categories: provides you with a list of MEdia Net web pages containing links to
a variety of special interest sites. Highlight a selection from this list and press
the
-
key. These categories can be edited from within Customize MEdia Net.
WHAT’s HOT: provides a list of the most popular web page topics. Highlight a
link from the list and press the key to be taken to that web page.
-
Tones, Games, Pics: takes you to the MEdia Mall where you can sign up for the
Tone Club (for discount rates on bulk ringtone orders) or purchase Ringtones,
Answer Tones, Games, and Graphics. Highlight a link from the list and press the
key to begin the purchase process.
Note: Prior to purchasing downloadable tones, graphics, games, or other applications, it is necessary to
setup an e-wallet account so that with every purchase, your account can easily be debited.
-
Mail & Messaging: takes you to the MEdia Net messaging center where you
can access a variety of web-based messaging services and applications such as:
Mobile Email, Mobile IM, Yahoo! Mail/Messenger, Windows Live Mail/Messenger,
AOL Mail, Chat & Date, Address Book, and Calendar. Highlight a service from the
list and press the
key to begin using the service.
Note: Prior to using these services, you must complete the MEdia Net registration process located at:
www.cingular.com.
-
Sports: takes you to the MEdia Net Sports page listing where in addition to
national sports headlines, you can enter your local ZIP code and receive
information about your local teams. Highlight Continue and press the
key.
You can easily edit the teams listed within your My Teams section of this page by
using your Navigation keys to select Edit (from the upper-right of the page), and
press the
key.
Note: Prior to using this service you must agree to the terms of the service agreement and setup the
service on your handset.
-
-
Entertainment: takes you to the MEdia Net Entertainment page which provides
you with links to some of the most popular entertainment news and videos.
Highlight a link from the list and press the
key to begin.
More Categories: takes you to the MEdia Net Categories page which provides
114), News, Weather & Travel, movies, Chat & Date, Finance, Yahoo!/Windows
Live, AOL, Maps, En Español, Shopping, and Photo Services. Highlight a link
from the list and press the
key to begin.
• My Account: provides you with access to a listing of your most recent
purchases and available product (services). From the My Account screen,
highlight My Purchases and press the
key to begin.
141
Accessing the MEdia Net Homepage
• Customize MEdia Net: provides you with a list of MEdia Net setup and service
options which allow you to configure different aspects of the MEdia Net
experience. Highlight a selection from this list and press the
key.
-
Edit My Links: provides you with a list of available Internet links which you can
choose to add to your My Links section of the main Media Net homepage. To
add a link, navigate to the Add to My Links section, highlight an entry, and
press the
section, highlight an entry, and press the
highlight Remove, and press the key.
key. To remove a link, navigate to the Move/Delete Links
key. From the Edit My Links page,
-
Edit Categories: allows you to edit those category entries which appear on the
MEdia Net homepage. Although the first four entries (WHAT’S HOT, Tones,
Games, Pics, and Cellular Video) can not be removed, the remaining entries can
be toggled on or off. Highlight a category entry and press the
on (appear on the page) or off (remove it from the homepage).
key to toggle it
-
-
Parental Control: provides you with settings which can be configured to restrict
Username & Password: allows you to setup a username and password prior to
gaining access to the MEdia Net homepage and related services.
Note: Prior to using this service you must agree to the terms of the service agreement and setup the service
on your handset.
-
MEdia Net Mail: allows you to access and edit the entries found within the
MEdia Net messaging center. Although most of the entries can not be removed,
the remaining entries can be toggled on or off by navigation to the top of the
page, highlight Edit, and press the
highlight an entry and press the
key. From the Mail & Messaging page,
key to toggle it on (appears on the Mail &
Messaging page) or off (remove it from the Mail & Messaging page).
MEdia Net Tour: allows you to take a quick guided tour through the main
features of the MEdia Net pages (homepage, navigation, teams, etc..).
Privacy Policy: provides the web address for Cellular’s Privacy Policy.
-
-
• Help: provides you with list of some of the most frequently asked questions
regarding MEdia Net functionality. Highlight a question and press the
launch an on screen description
key to
3. To scroll through the screen, use the Up and Down Navigation keys.
To exit the browser at any time, simply press the
key.
MEdia Net and WAP 142
Accessing the MEdia Net Site
There are several ways to access a WAP site:
• Selecting a link on the browser
• Using a bookmark item in the Favorites folder; use the Bookmarks option on the
browser menu list or Favorites menu.
• Entering a URL address manually; use the Go to URL option on the browser menu
list.
Navigating with the WAP Browser
1. To scroll through browser items, press the Up or Down Navigation keys.
2. To select a browser item, highlight a MEdia Net entry and press the
key or press the Options soft key and choose Select.
3. To return to the previous page, press the
key, or press the Options
soft key and choose Back.
4. To access the browser menu list, press the Menu soft key.
5. To return to the start-up homepage, press the Menu soft key and select the
Home option.
Entering Text in the WAP Browser
When you are prompted to enter text, the currently active text input mode is
indicated on the screen. To change the text input mode, press the
more times.
key one or
The following modes are available:
• Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.
• Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.
• T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this
mode, you can use only the 0 key to display alternative words. To change case,
press and hold the * key.
• Number Mode (1): allows you to enter numbers.
143
Navigating with the WAP Browser
Selecting and Using Menu Options
Various menus are available when you are using the WAP Browser to navigate the
Wireless Web.
To access a menu option, press the menu soft key. A menu list displays.
Note: The menus may vary, depending on your version of the WAP Browser.
The following options are available:
• Go to: returns you to the main MEdia homepage.
• Go: lets you navigate Forward (next sequenced web page) or Backward (to the
previously visited web page) through pages in your browsing history.
• Reload: reloads the current page with updated information.
• Desktop View: changes the display mode of the browser.
• Page Size: change the page size of the displayed web page (Large, Normal, or Small).
• Go to Homepage: takes you back at any time to the homepage of the Wireless
Web service provider.
• Add to Favorites: bookmarks the current page and marks it as a favorite site.
• View Favorites: accesses and displays the bookmarks assigned as favorite web
pages.
• Send URL: send the URL of the current page via either a message or as an
attachment to another party via a Bluetooth device.
• Enter URL: allows you to manually enter the URL address of a WAP site. After
entering an address, press the OK soft key to go there directly.
• Copy URL via Message: send the URL of the current page to another party to a
message.
• Save: saves either the image of the current web page or the current page itself.
• Saved Pages: access the list of web pages you have saved.
• History: displays the list of web pages you have recently accessed.
• Advanced: allows you to change the following settings for the browser.
• Clear Cache: deletes the information stored in the cache. The cache stores the most
recently accessed pages.
• Empty Cookies: delete cookies. Cookies are pieces of personal information sent to a
web server while navigating the web.
• Cookie Options: sets whether or not cookies are stored on your phone. If you select
Prompt, the phone will ask you to save the cookies on every page requiring
cookies.
MEdia Net and WAP 144
• Preferences: changes the settings for the web browser to suit your preference.
• Certificates: accesses certificate information from your phone.
• Page Details: displays the properties for the currently active web page.
• Browser Settings: selects a connection profile to be used when connecting to the
Internet.
• About Browser: displays the access version and copyright information about the
browser.
Using Favorites
While navigating through either the Internet or the MEdia Net pages, you can
bookmark a site to quickly and easily access it at a future time. The URL addresses
of the bookmarked sites are stored in the Favorites folder, wherein you can either
use the 6-preset URL addresses and store your own favorite URL addresses.
Accessing a WAP Site Using Favorites
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Select Favorites and press the Select soft key.
4. Select a bookmark item on the Favorite list. The preset URLs consist of:
• Cellular Video
• Chat
• News
• Sports
• Weather
• MEdia Net (homepage)
5. Press the Options soft key to select Go to or press the
Storing a URL Address as a Favorite
1. When the Idle screen displays, press the Menu soft key.
2. Select MEdia Net and press the Select soft key or the
3. Select Enter URL and press the Select soft key.
key.
key.
4. Enter the URL address and press the
key to launch the web page.
Tip: Use can use the
key to cycle through that available symbols and choose the . (period) and
the @ (at) needed for most website addresses.
5. Use the Down Navigation key, highlight Add Favorite and press the
key.
145
Downloading Multimedia Files
6. Use the Down Navigation key and enter some descriptive text for this
Favorites entry.
7. Press the Go to soft key to launch the website.
8. When you have finished, press the
key.
Editing Favorites
1. From the Favorites list, select the bookmark you want to change.
2. Press the Options soft key. Highlight Edit Favorite and press the
key.
3. Change the address and the name, as you would when storing a new one.
4. Press the Save soft key.
5. When you have finished, press the
Deleting Favorites
1. From the Favorites list, select the bookmark you want to delete.
key.
2. Press Options soft key. Highlight Delete and press the
key.
key.
3. Highlight Selected and press the Select soft key or the
4. Press the Yes soft key or the
key to confirm the deletion.
key.
5. When you have finished, press the
Downloading Multimedia Files
You can buy a variety of multimedia files, such as ringtones, graphics, applications,
Multimedia contents, and so on from the WAP browser and download them to your
phone’s memory. Your phone has embedded links to the WAP sits providing you with
download services, preset by your service provider.
1. When the Idle screen displays, press the Menu soft key.
2. Select AT&T Mall and press the Select soft key or the
key.
3. Highlight Shop Tones, Shop Games, Shop Graphics, Shop Multimedia,
or Shop Applications, depending on the type of items you want to buy.
To access homepage of the online shopping mall, select MEdia Net Home.
4. Find the item you want to download and follow the on-screen instructions
to purchase it.
Note: This content is delivered to you in Multimedia messages. You can retrieve the messages from the
server and then save the items in your phone’s memory. you cannot forward these messages to other
people or add the saved items to a Multimedia message.
MEdia Net and WAP 146
Using your History
The History list provides you with a list of the most recently visited web sites. These
entries can be used to return to previously unmarked web pages.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
key.
key.
3. Highlight History and press the Select soft key or the
4. Use the Up or Down Navigation key to highlight an entry from the list.
5. Press the Options soft key. Highlight Go to and press the Select soft key or
the
key.
6. When you have finished, press the
key to exit from the browser.
Clearing the Cache
The cache is the phone’s temporary memory in which the most recently accessed
web pages are stored. You can clear the cache at anytime.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
3. Highlight Advanced and press the Select soft key or the
4. Select Clear Cache and press the Select soft key or the
key.
key.
key.
5. Press the Yes soft key or the
key to confirm the deletion.
key.
6. When you have finished, press the
Clearing the Cookies
A cookie is a small file which is placed on your phone by a web site during
navigation. In addition to containing some site-specific information, it can also
contain some personal information (such as a username and password) which can
pose a security risk if not properly managed. You can clear this cookies from your
phone at any time.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
3. Highlight Advanced and press the Select soft key or the
4. Highlight Empty Cookies and press the Select soft key or the
key.
key.
key.
5. Press the Yes soft key or the
key to confirm the deletion.
key.
6. When you have finished, press the
147
Changing the WAP Profiles
Changing the WAP Profiles
Your phone is wirelessly connecting to the Internet via a built in WAP browser.
Connection can be made via either one of four available WAP browsers: MEdia Net
wap1.x, MEDia Net wap2,x, AT&T MMS (MultiMedia Server), or AT&T IMS. Use this
menu to create and customize the profiles containing the settings for connecting
your phone to the network. You need these settings to use the web browser or send
MMS messages or e-mails. Although the active connection can be changed by the
user, it is recommended that this choice be made with the assistance of either the
retailer or customer service representative.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight MEdia Net and press the Select soft key or the
key.
3. Highlight Browser Settings and press the Select soft key or the
key.
4. Use the Up or Down Navigation key to highlight one of these options:
• MEdia Net wap1.x
• MEdia Net wap2.x
• AT&T MMS
• AT&T IMS
5. Press the Options soft key.
Notes: The WAPs are pre-configured and can not be altered on this screen. The MMS connection option can
be edited, renamed, or deleted on this screen. Your phone is set up by default for connecting to the network.
If you change the settings without first checking with your service provider, the web browser, MMS, and e-
mail features may not work properly.
6. To create a new connection, press the Options soft key, select New, and
press the Select soft key or the
key.
- or -
7. To edit the existing MMS, highlight this entry, press the Options soft key,
select Edit, and press the Select soft key or the
key.
8. Select the parameter you want to edit:
• Set Name: enter a profile name.
• Access Name: edit the access point name.
• Auth Type: select the type of authentication used for this WAP connection:
None, Normal, or Secure.
• User ID: enter the User ID required to connect to the network.
• Password: enter the user password required to connect to the network.
• Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.
• Home URL: enter the URL address of the page to be used as your homepage.
MEdia Net and WAP 148
• Gateway address: (WAP only) enter the gateway address of the proxy server.
• Proxy address: (HTTP only) set the proxy server address and port.
• Linger Time (Sec.): set a time period (in seconds) after which the network is
disconnected if there has been no new data traffic in that time.
• Advanced Settings: allows you to configure some of the IP-specific
information: Static IP, Static DNS, Server information, and Traffic Class.
-
-
-
Static IP: specify if you want to manually enter an IP address. If you want the IP
address to be automatically assigned by the server, remove the check mark.
Local phone IP: enter the IP address obtained from the network operator, if you
checked the Static IP option.
Static DNS: specify if you want to manually enter the Domain Name Server
(DNS) address. If you want the address to be automatically assigned by the
server, remove the check mark.
-
-
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
Traffic Class: select the traffic class.
Note: The WAP settings may vary depending on the service provider.
149
Section 14: Accessibility
Topics Covered
•
TTY Settings
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a telecommunications device that
allows people who are deaf or hard of hearing, or who have speech or language
disabilities, to communicate via a telephone. This phone comes TTY-ready and only
requires the insertion of the TTY device to enable this feature.
Use the following steps to access the TTY settings:
1. Inserting a TTY connector into the Headset/Adapter jack (on the left side of
the phone) enables this function.
For additional technical support you may access the following website or call
1-888-987-4357.
Section 14: Accessibility 150
Section 15: Health and Safety Information
Topics Covered
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
This section outlines the safety precautions associated with using your phone. These
safety precautions should be followed to safely use your phone.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
Your wireless phone is a radio transmitter and receiver. It is designed and
manufactured not to exceed the exposure limits for radio frequency (RF) energy set
by the Federal Communications Commission (FCC) of the U.S. government.
151
Health and Safety Information
These FCC exposure limits are derived from the recommendations of two expert
organizations, the National Counsel on Radiation Protection and Measurement
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,
the recommendations were developed by scientific and engineering experts drawn
from industry, government, and academia after extensive reviews of the scientific
literature related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones employs a unit of
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of
the rate of absorption of RF energy by the human body expressed in units of watts
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a
substantial margin of safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands. Although the SAR is determined at the highest certified power level, the
actual SAR level of the phone while operating can be well below the maximum value.
This is because the phone is designed to operate at multiple power levels so as to
use only the power required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Before a new model phone is available for sale to the public, it must be tested and
certified to the FCC that it does not exceed the exposure limit established by the
FCC. Tests for each model phone are performed in positions and locations (e.g. at
the ear and worn on the body) as required by the FCC. For body worn operation, this
phone has been tested and meets FCC RF exposure guidelines when used with an
accessory that contains no metal and that positions the handset a minimum of
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC
RF exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile phone with all
reported SAR levels evaluated as in compliance with the FCC RF exposure
guidelines. The maximum SAR values for this model phone as reported to the FCC
are:
GSM
850
• Head: 1.05 W/Kg.
• Body-worn: 1.45 W/Kg.
Health and Safety Information 152
1900
• Head: 1.03 W/Kg.
• Body-worn: 0.644 W/Kg.
WCDMA
850
• Head: 0.373 W/Kg.
• Body-worn: 0.306 W/Kg.
1900
• Head: 1.46W/Kg.
• Body-worn: 0.541 W/Kg.
SAR information on this and other model phones can be viewed on-line at
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model
phone, this site uses the phone FCC ID number which is usually printed somewhere
on the case of the phone.
Sometimes it may be necessary to remove the battery pack to find the number. Once
you have the FCC ID number for a particular phone, follow the instructions on the
website and it should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be obtained at
www.fcc.gov/cgb/sar.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its customers to recycle
Samsung mobile phones and genuine Samsung accessories.
UL Certified Travel Adapter
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please
adhere to the following safety instructions per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW
THESE INSTRUCTIONS.
153
Consumer Information on Wireless Phones
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a series of Questions
and Answers for consumers relating to radio frequency (RF) exposure from wireless
phones. The FDA publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless phones with built-in
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless
phones can expose the user to measurable radio frequency energy (RF) because of
the short distance between the phone and the user's head. These RF exposures are
limited by Federal Communications Commission safety guidelines that were
developed with the advice of FDA and other federal health and safety agencies.
When the phone is located at greater distances from the user, the exposure to RF is
drastically lower because a person's RF exposure decreases rapidly with increasing
distance from the source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at far lower power
levels, and thus produce RF exposures well within the FCC's compliance limits.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health problems are
associated with using wireless phones. There is no proof, however, that wireless
phones are absolutely safe. Wireless phones emit low levels of radio frequency
energy (RF) in the microwave range while being used. They also emit very low levels
of RF when in the stand-by mode. Whereas high levels of RF can produce health
effects (by heating tissue), exposure to low level RF that does not produce heating
effects causes no known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies have suggested that
some biological effects may occur, but such findings have not been confirmed by
additional research. In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for inconsistent results.
Health and Safety Information 154
What is FDA's role concerning the safety of wireless
phones?
Under the law, FDA does not review the safety of radiation-emitting consumer
products such as wireless phones before they can be sold, as it does with new drugs
or medical devices. However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to
the user. In such a case, FDA could require the manufacturers of wireless phones to
notify users of the health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Although the existing scientific data do not justify FDA regulatory actions, FDA has
urged the wireless phone industry to take a number of steps, including the following:
• Support needed research into possible biological effects of RF of the type emitted
by wireless phones;
• Design wireless phones in a way that minimizes any RF exposure to the user that
is not necessary for device function; and
• Cooperate in providing users of wireless phones with the best possible information
on possible effects of wireless phone use on human health.
FDA belongs to an interagency working group of the federal agencies that have
responsibility for different aspects of RF safety to ensure coordinated efforts at the
federal level. The following agencies belong to this working group:
• National Institute for Occupational Safety and Health
• Environmental Protection Agency
• Federal Communications Commission
• Occupational Safety and Health Administration
• National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency working group
activities, as well.
FDA shares regulatory responsibilities for wireless phones with the Federal
Communications Commission (FCC). All phones that are sold in the United States
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA
and other health agencies for safety questions about wireless phones.
155
Consumer Information on Wireless Phones
FCC also regulates the base stations that the wireless phone networks rely upon.
While these base stations operate at higher power than do the wireless phones
themselves, the RF exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless phones. Base
stations are thus not the primary subject of the safety questions discussed in this
document.
What are the results of the research done already?
The research done thus far has produced conflicting results, and many studies have
suffered from flaws in their research methods. Animal experiments investigating the
effects of radio frequency energy (RF) exposures characteristic of wireless phones
have yielded conflicting results that often cannot be repeated in other laboratories. A
few animal studies, however, have suggested that low levels of RF could accelerate
the development of cancer in laboratory animals. However, many of the studies that
showed increased tumor development used animals that had been genetically
engineered or treated with cancer-causing chemicals so as to be pre-disposed to
develop cancer in absence of RF exposure. Other studies exposed the animals to RF
for up to 22 hours per day. These conditions are not similar to the conditions under
which people use wireless phones, so we don't know with certainty what the results
of such studies mean for human health.
Three large epidemiology studies have been published since December 2000.
Between them, the studies investigated any possible association between the use of
wireless phones and primary brain cancer, glioma, meningioma, or acoustic
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of
the studies demonstrated the existence of any harmful health effects from wireless
phones RF exposures. However, none of the studies can answer questions about
long-term exposures, since the average period of phone use in these studies was
around three years.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies of people actually
using wireless phones would provide some of the data that are needed. Lifetime
animal exposure studies could be completed in a few years. However, very large
numbers of animals would be needed to provide reliable proof of a cancer promoting
effect if one exists. Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-up may be needed to
provide answers about some health effects, such as cancer.
Health and Safety Information 156
This is because the interval between the time of exposure to a cancer-causing agent
and the time tumors develop - if they do - may be many, many years. The
interpretation of epidemiological studies is hampered by difficulties in measuring
actual RF exposure during day-to-day use of wireless phones. Many factors affect
this measurement, such as the angle at which the phone is held, or which model of
phone is used.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and with groups of
investigators around the world to ensure that high priority animal studies are
conducted to address important questions about the effects of exposure to radio
frequency energy (RF).
FDA has been a leading participant in the World Health Organization international
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result
of this work has been the development of a detailed agenda of research needs that
has driven the establishment of new research programs around the world. The
Project has also helped develop a series of public information documents on EMF
issues.
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal
Cooperative Research and Development Agreement (CRADA) to do research on
wireless phone safety. FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations. CTIA-funded research
is conducted through contracts to independent investigators. The initial research will
include both laboratory studies and studies of wireless phone users. The CRADA will
also include a broad assessment of additional research needs in the context of the
latest research developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not know that there is
- it is probably very small. But if you are concerned about avoiding even potential
risks, you can take a few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a person receives,
reducing the amount of time spent using a wireless phone will reduce RF exposure.
157
Consumer Information on Wireless Phones
• If you must conduct extended conversations by wireless phone every day, you
could place more distance between your body and the source of the RF, since the
exposure level drops off dramatically with distance. For example, you could use a
headset and carry the wireless phone away from your body or use a wireless
phone connected to a remote antenna.
Again, the scientific data do not demonstrate that wireless phones are harmful. But if
you are concerned about the RF exposure from these products, you can use
measures like those described above to reduce your RF exposure from wireless
phone use.
What about children using wireless phones?
The scientific evidence does not show a danger to users of wireless phones,
including children and teenagers. If you want to take steps to lower exposure to
radio frequency energy (RF), the measures described above would apply to children
and teenagers using wireless phones. Reducing the time of wireless phone use and
increasing the distance between the user and the RF source will reduce RF
exposure.
Some groups sponsored by other national governments have advised that children
be discouraged from using wireless phones at all. For example, the government in
the United Kingdom distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to limit wireless
phone use by children was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free
kits can be used with wireless phones for convenience and comfort. These systems
reduce the absorption of RF energy in the head because the phone, which is the
source of the RF emissions, will not be placed against the head. On the other hand, if
the phone is mounted against the waist or other part of the body during use, then
that part of the body will absorb more RF energy. Wireless phones marketed in the
U.S. are required to meet safety requirements regardless of whether they are used
against the head or against the body. Either configuration should result in
compliance with the safety limit.
Health and Safety Information 158
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions from wireless
phones, there is no reason to believe that accessories that claim to shield the head
from those emissions reduce risks. Some products that claim to shield the user from
RF absorption use special phone cases, while others involve nothing more than a
metallic accessory attached to the phone. Studies have shown that these products
generally do not work as advertised. Unlike "hand-free" kits, these so-called
"shields" may interfere with proper operation of the phone. The phone may be
forced to boost its power to compensate, leading to an increase in RF absorption.
In February 2002, the Federal trade Commission (FTC) charged two companies that
sold devices that claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC, these defendants
lacked a reasonable basis to substantiate their claim.
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact with some electronic
devices. For this reason, FDA helped develop a detailed test method to measure
electromagnetic interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now part of a standard
sponsored by the Association for the Advancement of Medical instrumentation
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and
many other groups, was completed in late 2000. This standard will allow
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This
standard specifies test methods and performance requirements for hearing aids and
wireless phones so that no interference occurs when a person uses a compatible
phone and a compatible hearing aid at the same time. This standard was approved
by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible interactions with
other medical devices. Should harmful interference be found to occur, FDA will
conduct testing to assess the interference and work to resolve the problem.
159
Road Safety
Additional information on the safety of RF exposures from various sources can be
obtained from the following organizations (Updated 12/1/2006):
• FCC RF Safety Program:
• Environmental Protection Agency (EPA):
• Occupational Safety and Health Administration's (OSHA):
• National Institute for Occupational Safety and Health (NIOSH):
• World Health Organization (WHO):
• International Commission on Non-Ionizing Radiation Protection:
• National Radiation Protection Board (UK):
• US Food and Drug Administration
Road Safety
Your wireless phone gives you the powerful ability to communicate by voice, almost
anywhere, anytime. But an important responsibility accompanies the benefits of
wireless phones, one that every user must uphold.
When driving a car, driving is your first responsibility. When using your wireless
phone behind the wheel of a car, practice good common sense and remember the
following tips:
1. Get to know your wireless phone and its features, such as speed dial and
redial. If available, these features help you to place your call without taking
your attention off the road.
2. When available, use a hands-free device. If possible, add an additional
layer of convenience and safety to your wireless phone with one of the
many hands free accessories available today.
3. Position your wireless phone within easy reach. Be able to access your
wireless phone without removing your eyes from the road. If you get an
incoming call at an inconvenient time, let your voice mail answer it for you.
Health and Safety Information 160
4. Let the person you are speaking with know you are driving; if necessary,
suspend the call in heavy traffic or hazardous weather conditions. Rain,
sleet, snow, ice and even heavy traffic can be hazardous.
5. Do not take notes or look up phone numbers while driving. Jotting down a
"to do" list or flipping through your address book takes attention away
from your primary responsibility, driving safely.
6. Dial sensibly and assess the traffic; if possible, place calls when you are
not moving or before pulling into traffic. Try to plan calls when your car will
be stationary. If you need to make a call while moving, dial only a few
numbers, check the road and your mirrors, then continue.
7. Do not engage in stressful or emotional conversations that may be
distracting. Make people you are talking with aware you are driving and
suspend conversations that have the potential to divert your attention from
the road.
8. Use your wireless phone to call for help. Dial 9-1-1 or other local
emergency number in the case of fire, traffic accident or medical
emergencies. Remember, it is a free call on your wireless phone!
9. Use your wireless phone to help others in emergencies. If you see an auto
accident, crime in progress or other serious emergency where lives are in
danger, call 9-1-1 or other local emergency number, as you would want
others to do for you.
10. Call roadside assistance or a special non-emergency wireless assistance
number when necessary. If you see a broken-down vehicle posing no
serious hazard, a broken traffic signal, a minor traffic accident where no
one appears injured, or a vehicle you know to be stolen, call roadside
assistance or other special non-emergency number.
"The wireless industry reminds you to use your phone safely when driving."
For more information, please call 1-888-901-SAFE, or visit our web-site
Provided by the Cellular Telecommunications & Internet Association.
For more information, please call 1-888-901-SAFE, or visit our web-site
Provided by the Cellular Telecommunications & Internet Association.
161
Responsible Listening
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud sounds over time. The
risk of hearing loss increases as sound is played louder and for longer durations.
Prolonged exposure to loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that using portable
audio devices, such as portable music players and cellular telephones, at high
volume settings for long durations may lead to permanent noise-induced hearing
loss. This includes the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound has also been
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
Individual susceptibility to noise-induced hearing loss and potential hearing problem
varies. Additionally, the amount of sound produced by a portable audio device varies
depending on the nature of the sound, the device settings, and the headphones that
are used. As a result, there is no single volume setting that is appropriate for
everyone or for every combination of sound, settings and equipment.
You should follow some commonsense recommendations when using any portable
audio device:
• Set the volume in a quiet environment and select the lowest volume at which you
can hear adequately.
• When using headphones, turn the volume down if you cannot hear the people
speaking near you or if the person sitting next to you can hear what you are
listening to.
• Do not turn the volume up to block out noisy surroundings. If you choose to listen
to your portable device in a noisy environment, you noise-cancelling headphones
to block out background environmental noise. By blocking background
environment noise, noise cancelling headphones should allow you to hear the
music at lower volumes than when using earbuds.
• Limit the amount of time you listen. As the volume increases, less time is required
before you hearing could be affected.
• Avoid using headphones after exposure to extremely loud noises, such as rock
concerts, that might cause temporary hearing loss. Temporary hearing loss might
cause unsafe volumes to sound normal.
Health and Safety Information 162
• Do not listen at any volume that causes you discomfort. If you experience ringing in
your ears, hear muffled speech or experience any temporary hearing difficulty
after listening to your portable audio device, discontinue use and consult your
doctor.
You can obtain additional information on this subject from the following sources:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Voice: (800) 222-2336
Email: [email protected]
Internet: www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
Voice: (301) 496-7243
Email: [email protected]
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Internet: http://www.cdc.gov/niosh/topics/noise/default.html
163
Operating Environment
Operating Environment
Remember to follow any special regulations in force in any area and always switch
your phone off whenever it is forbidden to use it, or when it may cause interference
or danger. When connecting the phone or any accessory to another device, read its
user's guide for detailed safety instructions. Do not connect incompatible products.
As with other mobile radio transmitting equipment, users are advised that for the
satisfactory operation of the equipment and for the safety of personnel, it is
recommended that the equipment should only be used in the normal operating
position (held to your ear with the antenna pointing over your shoulder if you are
using an external antenna).
Using Your Phone Near Other Electronic Devices
Most modern electronic equipment is shielded from radio frequency (RF) signals.
However, certain electronic equipment may not be shielded against the RF signals
from your wireless phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained between a handheld
wireless phone and an implantable medical device, such as a pacemaker or
implantable cardioverter defibrillator, to avoid potential interference with the device.
Persons who have such devices:
• Should ALWAYS keep the phone more than six (6) inches from their implantable
medical device when the phone is turned ON;
• Should not carry the phone in a breast pocket;
• Should use the ear opposite the implantable medical device to minimize the
potential for interference;
• Should turn the phone OFF immediately if there is any reason to suspect that
interference is taking place.
• Should read and follow the directions from the manufacturer of your implantable
medical device. if you have any questions about using your wireless phone with
such a device, consult your health care provider.
For more information see, http://www.fcc.gov/oet/rfsafety/rf-faqs.html
Hearing Aids
Some digital wireless phones may interfere with some hearing aids. In the event of
such interference, you may wish to consult your hearing aid manufacturer to discuss
alternatives.
Health and Safety Information 164
Other Medical Devices
If you use any other personal medical devices, consult the manufacturer of your
device to determine if it is adequately shielded from external RF energy. Your
physician may be able to assist you in obtaining this information. Switch your phone
off in health care facilities when any regulations posted in these areas instruct you to
do so. Hospitals or health care facilities may be using equipment that could be
sensitive to external RF energy.
Vehicles
RF signals may affect improperly installed or inadequately shielded electronic
systems in motor vehicles. Check with the manufacturer or its representative
regarding your vehicle. You should also consult the manufacturer of any equipment
that has been added to your vehicle.
Posted Facilities
Switch your phone off in any facility where posted notices require you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially explosive atmosphere and
obey all signs and instructions. Sparks in such areas could cause an explosion or fire
resulting in bodily injury or even death.
Users are advised to switch the phone off while at a refueling point (service station).
Users are reminded of the need to observe restrictions on the use of radio equipment
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting
operations are in progress.
Areas with a potentially explosive atmosphere are often but not always clearly
marked. They include below deck on boats, chemical transfer or storage facilities,
vehicles using liquefied petroleum gas (such as propane or butane), areas where the
air contains chemicals or particles, such as grain, dust or metal powders, and any
other area where you would normally be advised to turn off your vehicle engine.
Emergency Calls
This phone, like any wireless phone, operates using radio signals, wireless and
landline networks as well as user-programmed functions, which cannot guarantee
connection in all conditions. Therefore, you should never rely solely on any wireless
phone for essential communications (medical emergencies, for example).
Remember, to make or receive any calls the phone must be switched on and in a
service area with adequate signal strength. Emergency calls may not be possible on
165
FCC Notice and Cautions
all wireless phone networks or when certain network services and/or phone features
are in use. Check with local service providers.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for example, 911
or other official emergency number). Emergency numbers vary by location.
3. Press the
key.
If certain features are in use (call barring, for example), you may first need to
deactivate those features before you can make an emergency call. Consult this
document and your local cellular service provider.
When making an emergency call, remember to give all the necessary information as
accurately as possible. Remember that your phone may be the only means of
communication at the scene of an accident; do not cut off the call until given
permission to do so.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play with it because they
could hurt themselves and others, damage the phone or make calls that increase
your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close proximity to receiving
equipment. The FCC can require you to stop using the phone if such interference
cannot be eliminated.
Vehicles using liquefied petroleum gas (such as propane or butane) must comply
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
Health and Safety Information 166
Cautions
Any changes or modifications to your phone not expressly approved in this
document could void your warranty for this equipment, and void your authority to
operate this equipment. Only use approved batteries, antennas and chargers. The
use of any unauthorized accessories may be dangerous and void the phone warranty
if said accessories cause damage or a defect to the phone.
Although your phone is quite sturdy, it is a complex piece of equipment and can be
broken. Avoid dropping, hitting, bending or sitting on it.
Other Important Safety Information
• Only qualified personnel should service the phone or install the phone in a vehicle.
Faulty installation or service may be dangerous and may invalidate any warranty
applicable to the device.
• Check regularly that all wireless phone equipment in your vehicle is mounted and
operating properly.
• Do not store or carry flammable liquids, gases or explosive materials in the same
compartment as the phone, its parts or accessories.
• For vehicles equipped with an air bag, remember that an air bag inflates with great
force. Do not place objects, including both installed or portable wireless equipment
in the area over the air bag or in the air bag deployment area. If wireless
equipment is improperly installed and the air bag inflates, serious injury could
result.
• Switch your phone off before boarding an aircraft. The use of wireless phone in
aircraft is illegal and may be dangerous to the aircraft's operation.
• Failure to observe these instructions may lead to the suspension or denial of
telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the signal strength in your
area. Your phone informs you of the current signal strength by displaying a number
of bars next to the signal strength icon. The more bars displayed, the stronger the
signal.
If you're inside a building, being near a window may give you better reception.
167
Availability of Various Features/Ring Tones
Understanding the Power Save Feature
If your phone is unable to find a signal after 15 minutes of searching, a Power Save
feature is automatically activated. If your phone is active, it periodically rechecks
service availability or you can check it yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays on the screen.
When a signal is found, your phone returns to standby mode.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's turned on, it
receives and transmits radio frequency (RF) signals. When you use your phone, the
system handling your call controls the power level. This power can range from 0.006
watts to 0.2 watts in digital mode.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should service your
phone and accessories. Faulty service may void the warranty.
There are several simple guidelines to operating your phone properly and
maintaining safe, satisfactory service.
• If your phone is equipped with an external antenna, hold the phone with the
antenna raised, fully-extended and over your shoulder.
• Do not hold, bend or twist the phone's antenna, if applicable.
• Do not use the phone if the antenna is damaged.
• If your phone is equipped with an internal antenna, obstructing the internal
antenna could inhibit call performance.
• Speak directly into the phone's receiver.
• Avoid exposing your phone and accessories to rain or liquid spills. If your phone
does get wet, immediately turn the power off and remove the battery. If it is
inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may require additional
subscription and/or usage charges. Not all features are available for purchase or use
in all areas. Downloadable Ring Tones may be available at an additional cost. Other
conditions and restrictions may apply. See your service provider for additional
information.
Health and Safety Information 168
Battery Standby and Talk Time
Standby and talk times will vary depending on phone usage patterns and conditions.
Battery power consumption depends on factors such as network configuration,
signal strength, operating temperature, features selected, frequency of calls, and
voice, data, and other application usage patterns.
Battery Precautions
• Avoid dropping the cell phone. Dropping it, especially on a hard surface, can
potentially cause damage to the phone and battery. If you suspect damage to the
phone or battery, take it to a service center for inspection.
• Never use any charger or battery that is damaged in any way.
• Use the battery only for its intended purpose.
• If you use the phone near the network's base station, it uses less power; talk and
standby time are greatly affected by the signal strength on the cellular network
and the parameters set by the network operator.
• Follow battery usage, storage and charging guidelines found in the user’s guide.
• Battery charging time depends on the remaining battery charge and the type of
battery and charger used. The battery can be charged and discharged hundreds of
times, but it will gradually wear out. When the operation time (talk time and
standby time) is noticeably shorter than normal, it is time to buy a new battery.
• If left unused, a fully charged battery will discharge itself over time.
• Use only Samsung-approved batteries and recharge your battery only with
Samsung-approved chargers. When a charger is not in use, disconnect it from the
power source.
• Do not use incompatible cell phone batteries and chargers. Some Web sites and
second-hand dealers, not associated with reputable manufacturers and carriers,
might be selling incompatible or even counterfeit batteries and chargers.
Consumers should purchase manufacturer or carrier recommended products and
accessories.
• Extreme temperatures will affect the charging capacity of your battery: it may
require cooling or warming first.
• Do not leave the battery in hot or cold places, such as in a car in summer or winter
conditions, as you will reduce the capacity and lifetime of the battery. Always try to
keep the battery at room temperature. A phone with a hot or cold battery may
temporarily not work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F). The battery should not
169
Care and Maintenance
be charged at temperatures below 0 degrees C (32 degrees F) or above 45
degrees C (113 degrees F).
• Do not place the phone in areas that may get very hot, such as on or near a
cooking surface, cooking appliance, iron, or radiator.
• Do not get your phone or battery wet. Even though they will dry and appear to
operate normally, the circuitry could slowly corrode and pose a safety hazard.
• Do not short-circuit the battery. Accidental short-circuiting can occur when a
metallic object (coin, clip, key, jewelry or pen) causes a direct connection between
the + and - terminals of the battery (metal strips on the battery), for example when
you carry a spare battery in a pocket or bag. Short-circuiting the terminals may
damage the battery or the object causing the short-circuiting.
• Do not crush, puncture or put a high degree of pressure on the battery as this can
cause an internal short-circuit, resulting in overheating.
• Dispose of used batteries in accordance with local regulations. In some areas, the
disposal of batteries in household or business trash may be prohibited. For safe
disposal options for Li-Ion batteries, contact your nearest Samsung authorized
service center. Always recycle. Do not dispose of batteries in a fire.
Care and Maintenance
Your phone is a product of superior design and craftsmanship and should be treated
with care. The suggestions below will help you fulfill any warranty obligations and
allow you to enjoy this product for many years.
• Keep the phone and all its parts and accessories out of the reach of small children.
• Keep the phone dry. Precipitation, humidity and liquids contain minerals that will
corrode electronic circuits.
• Do not use the phone with a wet hand. Doing so may cause an electric shock to
you or damage to the phone.
• Do not use or store the phone in dusty, dirty areas, as its moving parts may be
damaged.
• Do not store the phone in hot areas. High temperatures can shorten the life of
electronic devices, damage batteries, and warp or melt certain plastics.
• Do not store the phone in cold areas. When the phone warms up to its normal
operating temperature, moisture can form inside the phone, which may damage
the phone's electronic circuit boards.
• Do not drop, knock or shake the phone. Rough handling can break internal circuit
boards.
Health and Safety Information 170
• Do not use harsh chemicals, cleaning solvents or strong detergents to clean the
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water
solution.
• Do not paint the phone. Paint can clog the device's moving parts and prevent
proper operation.
• Do not put the phone in or on heating devices, such as a microwave oven, a stove
or a radiator. The phone may explode when overheated.
• If your phone is equipped with an external antenna, use only the supplied or an
approved replacement antenna. Unauthorized antennas or modified accessories
may damage the phone and violate regulations governing radio devices.
• If the phone, battery, charger or any accessory is not working properly, take it to
your nearest qualified service facility. The personnel there will assist you, and if
necessary, arrange for service.
171
Standard Limited Warranty
Section 16: Warranty Information
Topics Covered
•
Standard Limited Warranty
Standard Limited Warranty
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the
original purchaser ("Purchaser") that SAMSUNG's Phones and accessories
("Products") are free from defects in material and workmanship under normal use
and service for the period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
1 Year
Batteries
Leather Case/ Pouch
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper use of
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or
electromechanical stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number removed or made
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched
or damaged due to normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral equipment not
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,
operation, maintenance, installation, or adjustment; (f) installation, maintenance,
and service of Product, or (g) Product used or purchased outside the United States or
Canada. This Limited Warranty covers batteries only if battery capacity falls below
80% of rated capacity or the battery leaks, and this Limited Warranty does not cover
any battery if (i) the battery has been charged by a battery charger not specified or
Warranty Information 172
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery
are broken or show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
What are SAMSUNG's Obligations? During the applicable warranty period,
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to
Purchaser, any defective component part of Product. To obtain service under this
Limited Warranty, Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by Purchaser's sales
receipt or comparable substitute proof of sale showing the date of purchase, the
serial number of Product and the sellers' name and address. To obtain assistance on
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts
or components when repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases, pouches and
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced
Product will be warranted for a period equal to the remainder of the original Limited
Warranty on the original Product or for 90 ays, whichever is longer. All replaced
parts, components, boards and equipment shall become the property of SAMSUNG.
If SAMSUNG determines that any Product is not covered by this Limited Warranty,
Purchaser must pay all parts, shipping, and labor charges for the repair or return of
such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,
INCLUDING BUT NOT LIMITED TO:
• THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR
PURPOSE OR USE;
• WARRANTIES OF TITLE OR NON-INFRINGEMENT;
• DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
• THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED
THEREIN; OR
• COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,
SPECIFICATION OR CONTRACT PERTAINING THERETO.
173
Standard Limited Warranty
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR
Warranty Information 174
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY
BE.
This Limited Warranty allocates risk of Product failure between Purchaser and
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the
limitations of liability contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make modifications to
this Limited Warranty, or make additional warranties binding on SAMSUNG.
Accordingly, additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and should not be
relied upon.
Precautions for Transfer and Disposal
If data stored on this device is deleted or reformatted using the standard methods,
the data only appears to be removed on a superficial level, and it may be possible for
someone to retrieve and reuse the data by means of special software.
To avoid unintended information leaks and other problems of this sort, it is
recommended that the device be returned to Samsung’s Customer Care Center for
an Extended File System (EFS) Clear which will eliminate all user memory and return
all settings to default settings. Please contact the Samsung Customer Care Center
for details.
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in
order to provide this service at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, L.P.
1301 East Lookout Drive
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
175
Standard Limited Warranty
©2007 Samsung Telecommunications America. All rights reserved.
No reproduction in whole or in part allowed without prior written approval.
Specifications and availability subject to change without notice.
Warranty Information 176
Audio 97
Index
Numerics
A
B
3GP 103
Battery
charging 7
installing 6
AAC 103
AAC+ 103
BellSouth 69
Bluetooth 86
Address Book
Bluetooth Device
Stereo 104
AIM 69
All Calls
C
Call Forwarding
Answering Mode
Normal 83
AOL 69
Applications 121
Calculator 137
Call Settings
Calendar 133
Converter 138
Note 137
Tasks 136
Call Status Tones
AT&T Music
177
Effects 126
Configuring
Settings 127
Your Phone’s Bluetooth Name
Camera
Effects 123
Your Phone’s Bluetooth
Security 87
Your Phone’s Bluetooth
Visibility 87
Your Phone’s USB Connection
Frames 123
Settings 124
Camera Shortcuts
Alerts 118
D
Data Calls
Dialing a Number
Display
icons 14
Customizing 118
Favorites 118
Options 115
Community 112
Exit 109
178
Messaging 61
P
Phone
icons 14
Phone Settings
Language 81
Missed Call
Shortcuts 81
Playing Music Transferred from the
Handset 103
Deleting 26
Details 24
Viewing 24
MobiRadio 109
MP3 103
MP4 103
R
MPEG 103
Multimedia Files
Downloading 146
Multitasking 104
Mute 30
S
Security 92
N
Change the Phone Password
Numeric 33
O
Options
Settings 76
180
Connectivity 85
Profiles 76
Text Input Method
Changing 32
Time & Date
Security 92
Shortcuts 38
Show Number
Transferring Music
From the Digital Music Stores
Hide 82
Show 82
Turning on/off
phone 9
Speed Dial
Standard Limited Warranty
Storing a Number
Storing a number
Streaming a Music Channel
U
Group 58
USIM 5
USIM card
installing 6
Using Management
Checking the Memory Status
Symbols 33
T
T9 Mode
Deleting all of the Phone book
Entries 59
181
|