Samsung SGH A717 User Manual

SGH-A717  
P O R T A B L E Q u a d - B A N D  
M O B I L E  
P H O N E  
User Guide  
Please read this manual before operating your  
phone, and keep it for future reference.  
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH OF  
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
A717_UCGD7_ATT_WB_050207_F5  
Table of Contents  
1
Table of Contents  
2
3
Table of Contents  
4
Section 1: Getting Started  
Topics Covered  
This section describes the first steps to operating your phone.  
SIM Card Information  
When you subscribe for 3G cellular network services, you receive a plug-in USIM  
(Universal Subscriber Identity Module) card loaded with your subscription details,  
such as your PIN, and available optional services.  
Install and charge the phone  
1. If necessary, power-off the phone by holding down the  
key until the  
power-off image displays.  
2. Remove the battery by pressing the battery lock down and slide the battery  
cover away, as shown.  
5
         
SIM Card Information  
Inserting and Removing the SIM card  
Important!: The plug-in SIM card and its contacts can be easily damaged by scratches or bending. Use  
caution when inserting or removing the card and keep all SIM cards out of reach of children.  
Make sure the gold contacts of the card are face down, then slide the SIM card into  
the socket.  
Installing the Battery  
1. Align the battery tabs with the slots at the bottom of the phone.  
2. Press the battery down until it clicks into place. Make sure that the battery  
is properly installed before switching on the phone.  
3. With the battery in position on the phone, place the cover back on the  
handset and slide it in until it clicks.  
Getting Started  
6
   
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. Use the travel adaptor to  
charge the battery, and use only Samsung approved batteries and chargers.  
Note: You must fully charge the battery before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
Note: For connection to an electrical supply not located in the U.S., you must use an adaptor of the proper  
configuration for the power outlet. Use of the wrong adaptor could damage your phone and void your  
warranty.  
1. Plug the connector of the travel adaptor into the jack on the side of the  
phone.  
2. Plug the adaptor into a standard AC wall outlet.  
Note: The following illustration is the correct and incorrect method for connecting the charger. If attempted,  
damage to the accessory port will occur therefore voiding the phone’s warranty.  
3. When the phone is completely charged (the battery icon becomes still),  
unplug the adapter from the power outlet.  
7
     
Installing the microSD Card  
4. Remove the adapter from the phone by gently pulling the connector out.  
Note: You must unplug the adaptor before removing the battery from the phone during charging to avoid  
damage.  
Installing the microSD Card  
To add additional memory to your phone you can insert a microSD card into the side  
of the phone. Use the following instructions and illustrations for proper insertion and  
removal.  
1. Open the side slot to insert the card. Place the microSD card into the slot.  
2. Push the microSD card into the slot until it clicks into place.  
Warning!: Please note the proper side is facing down when inserting the card.  
3. To remove the card, a quick press to release the card from the slot.  
Getting Started  
8
   
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, a warning tone  
sounds, the “Battery Low” message repeats at regular intervals on the display, and  
the empty battery icon  
blinks. The backlight turns off to conserve the  
remaining battery power.  
If the battery level becomes too low, the phone automatically turns off. Recharge  
your battery.  
Turning the Phone On or Off  
1. Open the phone.  
2. Press and hold the  
key until the phone power-on screen displays.  
Note: Do not turn on the phone when mobile phone use is prohibited.  
3. If the phone asks you to enter a password, enter a password and press the  
Confirm soft key or the  
The phone searches for your network and after finding it, the Idle screen  
displays. Now, you can make or receive calls.  
Note: The display language is preset to Automatic at the factory. To change the language, use the  
4. When you wish to switch off the phone, press and hold the  
key until  
the power-off image is displayed.  
Note: You must store the voicemail server number before accessing the server. Your service provider can  
give you the number.  
Setting Up Your Voice Mail  
To access you voice mail from your keypad, use the following steps:  
9
         
Setting Up Your Voice Mail  
1. Open the phone to access your keypad.  
2. From an Idle screen, press and hold the  
key.  
3. Follow the voice mail prompts to access messages.  
Accessing Your Voice Mail  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Highlight Recent Calls and press the  
key.  
3. Highlight Voice Mail.  
4. Highlight Connect to Voice Mail and press the  
the key.  
Select soft key or  
5. When connected, follow the voice prompts from the voice mail center.  
Changing the Voice Mail Name and Number  
Your SIM card gives you default service number of the voice mail center. However,  
you may need to change the number. Use the following procedures to change your  
voice mail number.  
1. In Idle mode, press the Menu soft key  
to access Menu mode.  
2. Highlight Recent Calls and press Select soft key or the  
key.  
key.  
3. Highlight Voice Mail and press Select soft key or the  
4. Highlight Voice Server Number and press the Select soft key or the  
key.  
5. Press the Edit softkey.  
6. To edit the Voice Server Name, highlight Name and press and press  
to delete the current name and then use your keypad to enter a  
replacement name.  
- or -  
7. To edit the Voice Mail Number, highlight Center Address and press  
to  
delete the current number.  
Getting Started 10  
   
8. Enter your new Voice Server number and press the Save soft key or the  
key to save this new number.  
9. Press the  
key to return to Idle mode.  
11  
Features of Your Phone  
Section 2: Understanding Your Phone  
Topics Covered  
This section outlines some key features of your phone. It also displays the screen  
and the icons that are displayed when the phone is in use.  
Features of Your Phone  
Your phone is lightweight, easy-to-use and offers many significant features. The  
following list outlines a few of the features included in your phone.  
User friendly, menu driven access to features and options.  
Bluetooth  
Camera and camcorder  
Video Sharing  
Multi-tasking  
Instant Messaging capability  
E-mail  
Featured applications provide alarms, calendar, calculator, record audio, converter,  
timer, stopwatch, and world time.  
File viewer  
Name card  
Multimedia Message Service (MMS)  
Multimedia capability (with included Media player)  
Photo caller ID  
Speakerphone capability  
Web browser  
Understanding Your Phone 12  
       
Open View of Your Phone  
The following illustrations show the main elements of your phone:  
Keys  
The following list correlates to the open and front view illustrations.  
1. Display: This screen displays all the information needed to operate your  
phone.  
2. Navigation keys: This key allows you to scroll through phone menu  
options and provides a shortcut to phone functions from standby mode.  
3. Soft keys: Perform the functions indicated by the screen text on the  
bottom of the display.  
4. Music key: Allows you to access both local and web-based Music  
applications.  
5. Send key: Allows you to place or receive a call. In standby mode, press the  
key once to access the Recent Call log. If you press and hold the key down,  
you will initiate the most recent call from the Recent Call log.  
6. Microphone: The Microphone allows the other callers to hear you clearly  
when you are speaking to them.  
13  
   
Open View of Your Phone  
7. Voice Mail key: Press and hold the  
key to automatically dial your  
voicemail.  
[ ] character for  
8. Special Function keys: Asterisk/Shift key-enters the  
*
calling features. In text mode, press to change the character input type.  
[ ] character for calling features. In  
Pound/Space key-enters the pound #  
text entry mode, press to enter a space between characters.  
Press and hold the to activate/deactivate the Silent profile. Press and  
hold  
to enter a pause between numbers.  
9. Alphanumeric keypad: Use these keys to enter numbers, letters and  
some special characters. When in Idle mode, press and hold the key to  
access your voicemail server or press and hold  
International call prefix.  
to enter an  
10. Clear key: Deletes characters from the display when you are in text entry  
mode. Deletes items when in an application. When in a main menu, press  
to return to the previous menu.  
11. Power on/off/Menu Exit key: Ends a call. Press and hold this key for a  
few seconds to power your phone On or Off. While in the main menu, it  
returns the phone to standby mode and cancels you input. When you  
receive an incoming call, press to reject call.  
12. Swap key: Opens the application switch window which allows you to  
select from a group of different applications without having to exit from the  
currently active application.  
13. Menu access/Confirm key (WAP browser): When navigating through a  
menu accepts the highlighted choice in the menu. If you press once in Idle  
mode, the WAP browser will launch.  
14. Earpiece/Speaker: Used to listen to audio and music from your phone.  
Understanding Your Phone 14  
Closed View of Your Phone  
Keys  
The following list correlates to the open and front view illustrations.  
1. Camera lens: The camera lens is used for taking photos.  
2. Front LCD: Your phone has an external display on the front of the phone. It  
indicates when you have an incoming call or message. It also displays  
date, time, reception, battery power, and any icons associated with alerts,  
such as messages, or a set alarm.  
3. Volume key: Allows you to adjust the ringer volume in standby mode or  
adjust the voice volume during a call. The volume key can also be used to  
scroll up or down to navigate through the different menu options. To mute  
the ringer during an incoming call, press the volume key up or down.  
When the phone is closed, press and hold these keys to toggle the display  
on or off. This key is also used when the Music Player is active.  
If you are playing music and the backlight goes out, you will need to press and  
hold this key to gain access to the music player keys when the flip is closed. If  
the backlight is out, the keys themselves will not wake up the phone or control  
the music player.  
4. Headset jack/Adapter jack: Allows you to plug in the travel adapter  
(power), PC connection cable (data transfer), and optional headset for safe,  
convenient, hands-free conversations.  
5. Memory Card slot: Used to install an optional microSD™ card for  
additional data storage.  
15  
         
Internal Display Layout  
Back Light  
A back light illuminates the display and the keypad when you press any key or open  
the phone. It turns off when no keys are pressed within a given period of time,  
and/or dims the light, depending on the settings in the Backlight Time menu.  
Internal Display Layout  
The display has 3 areas:  
Icons  
Shows the received signal strength. The greater the number of  
bars, the stronger the signal.  
Appears when the phone is accessing services in a GPRS  
network. When data is being transferred, this icon animates.  
Appears when the phone is accessing services in an EDGE  
network. When data is being transferred, this icon animates.  
Appears when the phone is accessing services in a 3G (UMTS)  
network. When data is being transferred, this icon animates.  
Appears when the phone is accessing services in a 3G+  
(HSDPA) network. When data is being transferred, this  
icon animates.  
Appears when a call is in progress.  
Understanding Your Phone 16  
   
Appears when there is no network coverage available. When  
you are out of the service area, you cannot make or receive  
voice calls.  
Appears when an alarm is set on your phone.  
Appears when your incoming phone calls are being forwarded  
to another number.  
Appears when a new voice mail has been received.  
Appears when a new text message has been received.  
Appears when a new multimedia message has been received.  
Appears when a new E-mail message has been received.  
Appears when a push-messages has been received from the  
WAP server.  
Appears when a new Over the Air (OTA) software update file has  
been received.  
Appears after your memory card has been inserted.  
Appears when Bluetooth wireless technology is active. When  
transferring data, this icon blinks red and blue.  
Appears when a Bluetooth wireless headset is active and in use.  
Appears when you are connected to a PC via a USB port.  
Appears when you are browsing the Internet while using the  
phone as a modem.  
Appears when you are connected to a secured web page.  
Note: The default phone profile is Normal, the profile is editable and the displayed icons may vary  
according to the setting.  
17  
Internal Display Layout  
Appears when the phone’s profile is set to either Normal,  
Driving or Meeting profile or Driving. This indicates that the  
phone’s incoming Alert Type is set to melody. This audio icon is  
accompanied on screen by the Driving or Meeting icon.  
Appears when the phone’s profile is set to Silent. In this case,  
the speaker is muted and the phone only vibrates and displays  
information on its front panel LCD. This Vibrate off icon is  
accompanied on screen by the Vibrate icon.  
Appears when the phone’s profile is set to Silent. This indicates  
that the phone’s incoming Alert Type is set to vibrate only. This  
icon is accompanied on screen by the Vibrate off icon.  
Appears when the phone’s profile is set to Meeting. In this  
case, both the speaker and vibration features are disabled and  
only the front panel LCD displays information. This icon is  
accompanied on screen by the Melody Alert icon.  
Appears when the phone’s profile is set to Airplane. This  
indicates that the phone’s incoming Alert Type is set to mute the  
speakers and deactivate the vibration feature.  
This Vibrate Off icon is accompanied on screen by either  
the Airplane icon.  
Appears when the phone’s profile is set to Driving. In this case,  
the speaker is active. In this case, the speaker is active and will  
launch the currently selected ringtone or melody when the  
associated notification is activated. This icon is accompanied  
on screen by the Audio icon.  
Appears when the phone’s profile is set to Outdoor. In this case,  
the speaker is active, the volume settings are raised to their  
highest levels, any currently active ringtones or melodies  
are activated, and the phone’s vibrate feature is activated.  
This icon is accompanied on screen by the Vibrate/Audio icon.  
Understanding Your Phone 18  
Appears when the phone’s profile is set to Outdoor. This  
indicates that the phone’s incoming Alert Type is set to melody  
and vibrate. This vibrate/audio icon is accompanied on screen  
by the Outdoor icon.  
Appears when a phone’s profile is set to Airplane. This  
indicates that the phone’s incoming Alert Type allows you to use  
many of your phone’s features, such as Games, Music,  
Voice Memos, etc., but you cannot send or receive any calls or  
access online information. This icon is accompanied on screen  
by the Vibrate Off icon.  
Appears when the speakerphone feature is being used during  
an active call.  
Shows the level of your battery. The more bars you see, the  
more power you have remaining.  
Selecting Functions and Options  
Your phone offers a set of functions that can be customized for your ease and  
specific needs. These functions are arranged in menus and sub-menus, accessed  
using the two soft keys. Each menu and sub-menu allows you to view and alter the  
settings of a particular function.  
In some functions, you may be asked for a password or PIN. Enter the code and  
press the Select soft key or the  
key.  
When you access a list of options, your phone highlights the currently active option.  
If, however, there are only two options, such as On/Off or Enable/Disable, your  
phone highlights the option that is not currently active, so that you can select it  
directly.  
Selecting Options  
To view the various functions and options available and to select the one you want:  
Press the appropriate soft key.  
To select the function displayed or the option highlighted, press the Select soft key  
or the  
key.  
To view the next function or highlight the next option on a list, press the Down  
Navigation key or the key on the left side of the phone.  
19  
   
Command Keys  
To move back to the previous function or option on a list, press the Up Navigation  
key or the key on the left side of the phone.  
To move back up one level in the menu structure, press the Back soft key.  
To exit the menu structure without changing the settings, press the  
key.  
Command Keys  
Functions for the soft keys are defined by what appears above each in the display.  
There are two soft keys, the left soft key  
and the right soft key  
.
Soft Keys  
The roles of the soft keys vary depending on the function you are currently using; the  
labels on the bottom line of the display just above each key indicate their current  
role.  
Left Soft Key  
Some functions of the left soft key are as follows.  
In the Idle screen, press the Menu (left) soft key  
to open the Menu screen.  
When in a menu mode the left soft key  
function is Select.  
Right Soft Key  
Some functions of the right soft key are as follows.  
In the Idle screen, press the Options (right) soft key  
to open the My Menu  
screen. This menu contains the following:  
1: Camera  
2: Profiles  
3: Bluetooth  
4: Alarms  
5~12: Empty  
When in a menu mode the right soft key  
function is Back.  
Understanding Your Phone 20  
           
Clear Key  
The CLR key  
is used to erase or clear numbers, text, or symbols from the  
display. You can also use  
mode from any menu.  
to return to a previous menu or to return to standby  
If you enter an incorrect character, briefly press  
character.  
to backspace (and delete) the  
To erase the entire sentence, press and hold  
.
To back up one menu level, briefly press  
.
End Key  
The End key  
is used to turn on/off your phone, disconnect calls, and return to  
the standby mode.  
Press and hold the End key  
Briefly press once to disconnect a call.  
to return to standby mode from any menu.  
to turn on/off your phone.  
Press  
Send Key  
The Send key  
is used to answer calls, dial calls, and to recall the last number(s)  
dialed, received, or missed.  
Press  
once to answer calls.  
Enter a number and briefly press  
to make a call.  
Briefly press  
phone.  
in standby mode to display a list of recent calls to and from your  
Press  
Press  
twice in standby mode to call the most recent number.  
to pick up a waiting call.  
21  
     
Command Keys  
Navigation Key  
Use the directional keys on the Navigation key to browse menus, sub menus, and  
lists. Press the up or down navigation when jumping to highlighted links on the web.  
Each key also acts as a shortcut to launch applications.  
Understanding Your Phone 22  
 
Section 3: Call Functions  
Topics Covered  
This section describes how to make or answer a call. It also includes the features  
and functionality associated with making or answering a call.  
Making a Call  
When the Idle screen displays, enter the area code and phone number, and press the  
key.  
Note: When you activate the Auto Redial option in the Voice Call menu, the phone will automatically redial  
up to 10 times when the person does not answer the call or is already on the phone.  
Making an International Call  
1. Press and hold the  
key. The + character appears.  
2. Enter the country code, area code, and phone number, then press the  
key.  
Correcting an Entered Number  
Use the following steps to correct a mis-typed entry when dialing.  
1. After entering a number  
To clear the last digit displayed, press the  
key.  
23  
           
Making a Call  
To clear another digit in the number, press the Left or Right Navigation key until  
the cursor is immediately to the right of the digit to be cleared. Press the  
key.  
To enter a missing digit press the Left or Right Navigation key until the cursor is  
in position and enter the digit.  
To clear the whole display, press and hold the  
2. Press the key to return to the Idle screen.  
Ending a Call  
key.  
When you want to finish your call, briefly press the  
key.  
Redialing the Last Number  
All incoming, outgoing and missed calls are listed in the Recent Calls Menu. If the  
number or caller is listed in your Address Book, the name associated displays.  
To access the Recent Calls menu:  
1. From the Idle Screen, press  
Menu. Use the navigation keys to highlight  
Select.  
Recent Calls and press  
2. Use the Up and Down Navigation keys to scroll through the Recent Calls  
options. Choose from All Calls, Missed Calls, Calls Made, Calls  
Received, or Voice Mail.  
3. From the Idle Screen, press the  
key to display a list of the most recent  
numbers used in the order you dialed or received them.  
4. Use the Up and Down Navigation keys to scroll through the numbers until  
the number you want highlights.  
5. To dial the number, highlight the number and press the  
key.  
Making a Call from the Address Book  
You can store phone numbers that you use regularly on the SIM card or in the  
phone’s memory. These entries are collectively called the Address Book.  
Once you have stored a number in the Address Book, you can dial it by pressing a  
few keys using the Speed Dial feature.  
For further details about the Address Book feature, see "Finding an Address Book  
Call Functions 24  
     
Answering a Call  
When a call is received the phone rings and displays the caller’s phone number, or  
name if stored in the Address Book.  
1. From the Idle Screen press the  
If the Any key option in the Call Settings menu is activated, you can press  
any key to answer a call except for the key and the Reject soft key.  
key.  
If the Active Flip option in the Call Settings menu is activated, you can  
answer the call simply by opening the phone.  
Note: To reject an incoming call, press and hold the Volume keys on the left side of the phone before  
opening the phone. A quick press of side volume key silences the ringer on an incoming call.  
2. End the call by closing the phone or by pressing the  
key.  
Note: You can answer a call while using the Address Book or menu features. After ending the call, the  
phone returns to the function screen you were using.  
Video Share  
The Video Share features allows you to place a call and share live or recorded video  
while on the call. You can initiate or receive video by using the following steps. To  
Initiating and Receiving a Video Share Session  
To initiate and receive a Video Share session use the following steps:  
1. Dial the number and press the  
2. Once the call is answered, if you're both capable of Video Share, a "Video  
Share Ready" icon will appear on the screen and the Right Soft Key  
will change to Video Share. Press the Right soft key to invite the  
key.  
other party to see video shot from your phone.  
3. "Establishing a Video Connection" displays. A message is sent to the  
recipient "###-###-#### Wants to Share Video With You."  
4. The recipient will receive a Video Share pop-up to Accept or Decline the  
Video Share call. Press the  
Left soft key Accept to continue or  
Right soft key to Decline.  
5. A Recording Started pop-up displays showing the memory available for the  
video.  
25  
       
Play a Video Share Recording  
6. During a Video Share session, the following are displayed above the soft  
key options:  
Stop: press this key to stop the video share feature.  
Brightness: press this key to adjust the brightness for the video.  
Mute: Press this key to turn the audio off.  
Spkr Off: press this key to turn off the speaker.  
Lscape: press this key to change the image orientation from Normal  
to Landscape.  
Tip: To stop the video share call press the Options soft key and press the Select the “Video Share End”  
soft key.  
A pop-up message displays “Do you want to save the video share call?” The  
recorded videos are stored in the My Stuff > Video folder.  
Video Share (In-Call)  
You can begin a Video Share call during an existing call by pressing  
Video  
Share, or by pressing the Options and selecting Video Share > Live.  
Play a Video Share Recording  
During a call (while not in a Live Video Share session) you can share a recorded  
video for the recipient. Press the Options key and select Video Share>Recorded>  
and then select from the available files in your "My Stuff," folder. To make the  
connection, the recipient should press Accept and the Video begins to play on both  
phones.  
Recent Calls  
The phone stores the numbers of the calls you’ve dialed, received, or missed in the  
Recent Calls menu. If the number or caller is listed in your Address Book, the  
associated name is displayed.  
Call Functions 26  
         
Viewing Missed Calls  
The number of calls you have missed is displayed on both the Idle screen and the  
front panel LCD. To view the number details, use the following steps:  
1. If the phone is closed, open the phone.  
2. Press the View soft key. The most recently missed call is displayed.  
Note: If there is a voicemail sent by the same number, associated icons display and can be selected.  
3. To scroll through the list of missed calls, press the Up or Down Navigation  
key.  
4. To move to another call type, press the Left or Right Navigation key.  
Viewing the Details of a Missed Calls  
To view the details of a selected missed call, use the following steps:  
1. Press the View soft key. The most recently missed call is displayed.  
2. To scroll through the list of missed calls, press the Up or Down Navigation  
key.  
3. With the missed call selected and press the Options soft key.  
4. Use the Navigation keys to highlight Details and press the  
Calling Back a Missed Call  
key.  
To call back a missed call number, use the following steps:  
1. Press the View soft key. The most recently missed call is displayed.  
2. To scroll through the list of missed calls, press the Up or Down Navigation  
key.  
3. Highlight the number and press either Call or press the Send to Call Back.  
Saving a Missed Call to your Address Book  
To save the missed call entry to your address book, use the following steps:  
1. Press the View soft key. The most recently missed call is displayed.  
2. With the missed call selected and press the Options soft key.  
3. Use the navigation keys to highlight Save to Address book and press the  
key.  
27  
       
Call Time  
4. Select the location of your Address Book:  
• Phone: This option allows you to save the missed number to your Address Book  
stored on the phone.  
• SIM: This option allows you to save the missed number to your Address Book  
stored on the optional SIM card.  
For further details about the Address Book feature, see "Adding a New Contact" on  
Sending a Message to a Missed Call  
To send a text message or attachment to a missed call entry, use the following  
steps:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options soft key and select Send Message. Press the Select  
soft key, or the  
key.  
3. At the “Create New Message” screen, press Down Navigation key.  
4. Use the Alphanumeric keys to type in a message or press the Options soft  
key to also Add Items such as an: Image, Sound, or Video.  
5. When you are done with your message, press the Options soft key. Use the  
navigation keys to highlight Send and press the  
key.  
Note: When you "Add items" in the options, the setting automatically changes to "Multimedia Message".  
Deleting a Missed Call  
To delete a missed call entry, use the following steps:  
1. Immediately after missing a call, press the View soft key.  
2. Press the Options soft key and select Delete. Press the Select soft key, or  
the  
key.  
3. At the “Delete?” prompt, press either the Yes soft key to confirm deletion  
or No to cancel.  
You can press the  
Call Time  
1. From the Idle Screen, press  
Recent Calls and press  
2. Highlight Call Time from the Recent Calls menu and press the Select soft  
key or the key.  
key at any time to exit the Missed Call feature.  
Menu. Use the navigation keys to highlight  
Select or the key.  
Call Functions 28  
       
3. The following options are available.  
• Last Call Time: shows the length of time for the last call.  
Total Sent: shows the total length of time for the calls made.  
Total Received: shows the total length of time for the calls received.  
4. Select the desired option, press the Reset soft key.  
5. Enter the password and press the Confirm soft key to reset the selected  
option.  
6. Press the Back soft key or the  
key to end.  
Data Volume  
1. From the Idle Screen, press  
Menu. Use the navigation keys to highlight  
Recent Calls and press  
Select.  
2. Highlight Data Volume and press the Select soft key or the  
key. Data  
Volume refers to the amount of data (volume) to and from the phone.  
3. Use the Up and Down Navigation keys to view the following information:  
• Last Sent Data: shows the size of the last data packet (measured in KB -  
kilobytes) sent by the phone since the last time this counter was reset.  
• Last Received Data: shows the size of the last data packet (measured in KB -  
kilobytes) received by the phone since the last time this counter was reset.  
Total Sent Data: shows the size of the total data packet (measured in KB -  
kilobytes) which have been sent by the phone since the last time this counter  
was reset.  
Total Received Data: shows the size of the total data packet (measured in KB -  
kilobytes) which have been received by the phone since the last time this counter  
was reset.  
4. Press the Back soft key or the  
key to end.  
Data Call Time  
1. From the Idle Screen, press  
Menu. Use the navigation keys to highlight  
Recent Calls and press  
Select.  
2. Highlight Data Call Time and press the Select soft key or the  
key.  
3. The following options are available:  
• Last Data Call: shows the time used for the last data call sent or received since  
the last time this counter was reset.  
Total Data Call: shows the total time used to send or receive data since the last  
time this counter was reset.  
4. Press the Back soft key or the  
key to end.  
29  
       
Silent Mode  
Silent Mode  
Silent mode is convenient when you wish to stop the phone from making noise, in a  
theater for example.  
In Idle mode, press and hold the  
key until the phone vibrates, the “Silent Profile  
on” message appears on screen. Both the  
are displayed on screen.  
Silent mode and  
Vibrate icons  
In Silent mode, your phone’s speakers are muted. The phone will vibrate and light up  
the external LCD display or just light the external LCD display depending on the  
settings of the Silent Phone Settings feature.  
To exit and reactivate the previous sound settings, press and hold the  
key again  
until “Normal Profile on” displays. The Silent mode and Vibrate icons are no longer  
displayed.  
Options During a Call  
Your phone provides a number of control functions that you can use during a call.  
Adjusting the Call Volume  
During a call, if you want to adjust the earpiece volume, use the Volume keys on the  
left side of the phone.  
Press the  
key to increase the volume level and the key to decrease the level.  
In Idle mode, you can also adjust the ringer volume using these same keys.  
Putting a Call on Hold  
You can place the current call on hold whenever you want. You can also make  
another call while you have a call in progress if your network supports this service.  
To put a call on hold:  
1. While on a call, press the left Options soft key.  
2. Highlight Hold and press the Select soft key. The call is on hold.  
3. You can reactivate the call whenever you want, by pressing the Resume  
soft key.  
Call Functions 30  
           
To make a call while you have a call in progress:  
1. Place the current call on hold using the previous procedures.  
2. Enter the new phone number that you wish to dial or look it up in the  
Address Book.  
3. Press the  
key to dial the second call. Once connected, both calls are  
displayed on the screen.  
When you have an active call and a call on hold, you may switch between the two  
calls, changing the one on hold to active and placing the other on hold.  
To switch between the two calls:  
1. Press the left soft key Options.  
2. Highlight Swap and press the Select soft key. The current call (#2) is  
placed on hold and the previous call on hold (#1) is reactivated so that you  
can continue conversing with that person.  
3. Press the  
To end a call:  
key to end the currently selected call.  
1. Press the left soft key Options.  
2. Highlight End and press the Select soft key.  
3. Highlight the call you wish to end (Active Call, Held Call, or All Calls) and  
press the Select soft key.  
4. Press the  
key to end the remaining call.  
Using the Speakerphone Key  
1. During a call, press the speakerphone key  
.
2. Use the volume keys (located on the left side of your phone) to adjust the  
volume.  
In Call Options  
During a call, press the Options soft key to access the following:  
Mute: Mutes the onboard microphone.  
Video Share: Initiates a video conferencing session.  
Whisper Mode ON/OFF: Increases the microphone sensitivity level so that you do  
not have to speak louder to be heard by the other party.  
Hold: Places the current call on hold.  
31  
   
Options During a Call  
Mute Keypad Tone: Silences/mutes the key tones when on the call. To turn this  
feature off (unmute the keypad), return to this option and select Send Keypad  
Tone.  
New Call: Places the current call on hold and then allows you to enter and dial  
another number.  
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you  
have selected. These DTMF tones are sent as a group. The DTMF tones are the  
tones used in phones for tone dialling, sounding when you press the number keys.  
This option is helpful for entering a password or an account number when you call  
an automated system, like a banking service.  
Address Book: Allows you to access your Address Book information.  
Save to Address Book: Allows you to add the currently phone number to your  
Contacts list on either your Phone or SIM card.  
View Address Book Details: Displays the Address Book entry information for this  
caller.  
Send Message: Allows you to create and send a new Text message or Multimedia  
Message.  
Calendar: Allows you to temporarily access your calendar while still maintaining  
the current call active.  
Note: Allows you to associate a note with the current phone number.  
End Call: Allows you to end the current call.  
If you have are in a multi-party call, the following options also display.  
Join: Joins all of the calls you have established with your phone (both active and  
on hold).  
Swap: Places the current call on hold and then activates the previous call.  
When you want to finish, end each call normally by pressing the  
key.  
Muting or Sending Key Tones  
These options allow you to turn the key tones off or on. If the Mute Key Tone option  
is selected, tones of the keys, which allows you to press keys without hearing  
annoying key tones during a call.  
Note: To communicate with answering machines or computerized telephone systems, the Send Keypad  
Tone option must be selected.  
Call Functions 32  
 
Switching off the Microphone (Mute)  
You can temporarily switch your phone’s microphone off, so that the other person  
cannot hear you.  
Example: You wish to say something to person in the room, but do not want the person on the phone to  
hear you.  
During a call, to switch the microphone off temporarily:  
1. Press the  
Mute. Unmute displays.  
2. Press the  
Unmute to deactivate the Mute function.  
Searching for a Number in Address Book  
You can search for a number in Address Book during a call.  
1. Press the Options soft key.  
2. Press the Down key to highlight the Address Book option.  
3. Press the Select soft key or the  
key.  
4. Highlight the Address Book entry by using the Up or Down Navigation key.  
- or -  
5. Enter the first few letters of the contact into the Search field which then  
highlights the closest match in the Address Book list.  
6. To view the highlighted entry, press the  
Options soft key.  
For further details about the Address Book feature, see "Finding an Address Book  
Call Waiting  
The Call Waiting feature allows you to answer an incoming call while you have a call  
in progress, if this service is supported by the network, and you have set the Call  
Settings > Call Waiting > Voice Waiting Menu to Activated. You are notified of an  
incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the incoming call. The first call is  
automatically put on hold.  
2. To switch between the two calls, press the left Options soft key and  
highlight Swap.  
33  
     
Options During a Call  
To end a call on hold:  
1. Press the Options soft key.  
2. Select the End Held Call option or press the  
To end the current call, press the key.  
key.  
Note: Join: Joins all of the calls you have established with your phone (both active and on hold).  
Swap: Places the current call on hold and then activates the previous call.  
3-Way Calling (Party Line)  
The 3-Way or Multi-Line feature allows you to answer a series of incoming calls,  
place them on hold, and if this service is supported by the network, and join all of the  
calls together. You are notified of an incoming call by a call waiting tone.  
To answer a call while you have a call in progress:  
1. Press the  
key to answer the first incoming call.  
2. Press the  
key to answer the consecutive incoming calls. The previous  
call is then automatically put on hold.  
3. To Join the first two calls, press the left Options soft key and highlight  
Join.  
4. To end the current call, press the  
key.  
Call Functions 34  
Section 4: Menu Navigation  
Topics Covered  
This section explains the menu navigation for your phone. It also includes an outline  
of all the available menus associated with your phone.  
Menu Navigation  
Menus and sub-menus can be accessed by scrolling through them using the  
Navigation keys or by using the shortcut keys.  
Accessing a Menu Function by Scrolling  
1. In Idle mode, press the Menu soft key to access Menu mode.  
2. Scroll using the Navigation keys to reach a main menu, Settings for  
example. Press the Select soft key or the  
key to enter the menu.  
3. If the menu contains sub-menus, Phone Settings for example, you can  
access them by first highlighting the option and then by pressing the  
Select soft key or the  
key. If the menu you have selected contains  
further options, repeat this step.  
4. To scroll through these menus, press either the Up or Down Navigation key  
or the Volume key (located on the left side of your phone). Press the  
Select soft key, or the  
5. To return to the previous menu level, press the Back soft key, the  
6. To exit the menu without changing the settings, press the key.  
key to make your selection.  
key.  
35  
       
Using Shortcuts  
Numbered menu items, such as menus, sub-menus, and options can be quickly  
accessed by using their shortcut numbers. In Menu mode, Main Menus can be  
accessed by pressing the number keys (1 to 0) corresponding to their location on the  
screen.  
Example: Accessing the Language menu.  
1. Press the Menu soft key.  
2. Press the  
3. Press the  
4. Press the  
5. Press the  
key for Settings.  
key for Phone Settings  
key for Language.  
key to display the list of available languages.  
Menu Outline  
The following list shows the menu structure and indicates the number assigned to  
each option.  
1: AT&T Music  
1: Music Player  
1: Last played  
2: All  
3: Recently played  
4: Most played  
5: Artists  
6: Genres  
7: Albums  
8: Composers  
9: Playlists  
2: Shop Music  
3: MusicID  
4: Streaming Music  
5: Music Video  
1: Go to  
2: Reload  
3: Desktop View  
4: Page Size  
5: Go to Homepage  
6: Add to Favorites  
Menu Navigation 36  
     
7: View Favorites  
8: Send URL  
9: Enter URL  
10: Copy URL via Message  
11: Save  
12: Saved Pages  
13: History  
14: Advanced  
6: The Buzz  
7: Community  
1: Go to  
2: Go  
3: Reload  
4: Desktop View  
5: Page Size  
6: Go to Homepage  
7: Add to Favorites  
8: View Favorites  
9: Send URL  
10: Enter URL  
11: Copy URL via Message  
12: Save  
13: Saved Pages  
14: History  
15: Advanced  
8: Music Apps  
1: Go to  
2: Go  
3: Reload  
4: Desktop View  
5: Page Size  
6: Go to Homepage  
7: Add to Favorites  
8: View Favorites  
9: Send URL  
10: Enter URL  
11: Copy URL via Message  
12: Save  
13: Saved Pages  
37  
14: History  
15: Advanced  
2: Messaging  
1: Create New Message  
1: Add Recipients  
2: Add Attachment  
3: Back  
2: Inbox  
1: View  
2: Reply  
3: Forward  
4: Call Back  
5: Delete  
6: Move to Phone  
7: Sort by  
8: Add to Address Book  
3: Mobile Email  
1: Yahoo! Mail  
2: AOL  
3: AIM  
4: Windows Live Mail  
5: AT&T Yahoo!  
6: BellSouth  
7: Other Providers  
4: IM  
1: AIM  
2: Windows Live  
3: Yahoo!  
5: Sent  
1: View  
2: Forward  
3: Delete  
4: Move to SIM  
5: Move to My Folder  
6: Sort by  
6: Outbox  
1: Edit  
2: Send Again  
3: Delete  
Menu Navigation 38  
4: Sort by  
7: Drafts  
1: Edit  
2: Send  
3: Delete  
4: Move to My Folder  
5: Sort by  
8: My Folder  
1: My Folder 1  
2: My Folder 2  
3: My Folder 3  
9: Templates  
1: Text Templates  
2: Multimedia Message Templates  
10: Delete All  
1: All  
2: Inbox  
3: Sent  
4: Outbox  
5: Drafts  
6: My Folder  
11: Messaging Settings  
1: Text Message  
2: Multimedia Message  
3: Voice Mail  
4: Push Message  
12: Memory Status  
3: Recent Calls  
1: All Calls  
1: Details  
2: Call Back  
3: Video Share ***  
4: Save to Address Book  
5: Send Message  
6: Delete  
7: Add to Reject List  
2: Missed Calls  
1: Details  
2: Call Back  
39  
3: Video Share***  
4: Save to Address Book  
5: Send Message  
6: Delete  
7: Add to Reject List  
3: Calls Made  
1: Details  
2: Call Back  
3: Video Share***  
4: Save to Address Book  
5: Send Message  
6: Delete  
7: Add to Reject List  
4: Calls Received  
1: Details  
2: Call Back  
3: Video Share***  
4: Save to Address Book  
5: Send Message  
6: Delete  
7: Add to Reject List  
5: Voice Mail  
1: Connect to Voice Mail  
2: Voice Server Number  
6: Speed Dial  
1: Add  
2: View  
3: Change  
4: Remove  
5: Voice Call  
7: Delete All  
1: All Calls  
2: Missed Calls  
3: Calls Made  
4: Calls Received  
8: Call Time  
1: Last Call Time  
2: Total Sent  
3: Total Received  
Menu Navigation 40  
9: Data Volume  
1: Last Sent Data  
2: Last Received Data  
3: Total Sent Data  
4: Total Received Data  
10: Data Call Time  
1: Last Data Call  
2: Total Data Call  
4: MEdia Net  
1: MEdia Net  
1: Go  
1: Forward  
2: Backward  
2: Reload  
3: Desktop View  
4: Page Size  
1: Large  
2: Normal  
3: Small  
5: Go to Homepage  
6: Add to Favorites  
7: View Favorites  
8: Send URL  
9: Enter URL  
10: Copy URL via Message  
11: Save  
12: Saved Pages  
13: History  
14: Advanced  
2: Enter URL  
3: Favorites  
1: Cellular Video  
2: Chat  
3: News  
4: Sports  
5: Weather  
6: MEdia Net  
4: Saved Pages  
5: History  
41  
1: Go to  
2: Delete  
3: Details  
6: Advanced  
1: Clear Cache  
2: Empty Cookies  
3: Cookie Options  
4: Preferences  
5: About Browser  
7: Browser Settings  
1: MEdia Net wap1.x  
2: MEdia Net wap2.x  
3: AT&T MMS  
4: AT&T IMS  
5: AT&T Mall  
1: Shop Tones  
2: Shop Games  
3: Shop Graphics  
4: Shop Multimedia  
5: Shop Applications  
6: MEdia Net Home  
6: Cellular Video  
1: Go to  
2: Go  
1: Forward  
2: Backward  
3: Reload  
4: Desktop View  
5: Page Size  
1: Large  
2: Normal  
3: Small  
6: Go to Homepage  
7: Add to Favorites  
8: View Favorites  
9: Send URL  
1: via Message  
2: via Bluetooth  
10: Enter URL  
Menu Navigation 42  
11: Copy URL via Message  
12: Save  
1: Image  
2: Web page  
13: Saved Pages  
14: History  
15: Advanced  
1: Clear Cache  
2: Empty Cookies  
3: Cookie Options  
4: Preferences  
5: Certificates  
6: Page Details  
7: Browser Settings  
8: About Browser  
7: My Stuff  
1: Audio  
1: Open  
2: Record Audio  
3: Create Folder  
4: Copy Folder  
5: Sort by  
6: Bluetooth Visibility  
7: Memory Card Settings**  
8: Properties  
2: Graphics  
1: Open  
2: Take Photo  
3: Create Folder  
4: Copy Folder  
5: Sort by  
6: Bluetooth Visibility  
7: Memory Card Settings**  
8: Properties  
3: Video  
1: Open  
2: Record Video  
3: Create Folder  
4: Copy Folder  
43  
5: Sort by  
6: Bluetooth Visibility  
7: Memory Card Settings**  
8: Properties  
4: Music  
1: Open  
2: Create Folder  
3: Copy Folder  
4: Sort by  
5: Bluetooth Visibility  
6: Memory Card Settings**  
7: Properties  
5: Games and Apps  
1: Open  
2: Create Folder  
3: Sort by  
4: Memory Card Settings**  
5: Properties  
6: Applications  
1: Open  
2: Create Folder  
3: Sort by  
7: Other Files  
1: Open  
2: Create Folder  
3: Copy Folder  
4: Sort by  
5: Bluetooth Visibility  
6: Memory Card Settings**  
7: Properties  
8: Memory Status  
1: Open  
2: Create Folder  
3: Sort by  
8: Address Book  
1: View  
2: Add New Contact  
1: Phone  
2: SIM  
Menu Navigation 44  
3: Voice Call  
4: Video Share***  
5: Send Message  
6: Edit  
7: Duplicate  
8: Delete  
1: Selected  
2: Multiple  
9: Save to My Stuff  
10: Send Business Card  
1: As Message  
2: via Bluetooth  
11: My Business Card  
1: Input method  
2: Input language  
3: Add More Fields  
12: Assign Speed Dial  
13: Copy to SIM  
1: Selected  
2: Multiple  
14: Move to SIM  
1: Selected  
2: Multiple  
15: Service Number  
16: FDN Contacts  
1: Create FDN Contact  
17: Copy to FDN Contacts  
18: Print via Bluetooth  
19: Address Book Settings  
1: Speed Dial  
2: Save New Contacts to Always Ask  
3: View Contacts from  
4: Own Number  
20: Memory Status  
9: Settings  
1: Profiles  
1: Normal  
2: Silent  
3: Driving  
45  
4: Meeting  
5: Outdoor  
6: Airplane  
2: Display Settings  
1: Display Settings  
2: Light Settings  
3: Time & Date  
1: Time zone updating  
2: Home Zone  
3: Time  
4: Date  
5: Time Format  
6: Date Format  
4: Phone Settings  
1: Language  
2: Shortcuts  
3: Own Number  
5: Call Settings  
1: All Calls  
2: Voice Call  
3: Data Call  
6: Connectivity  
1: Bluetooth  
2: Connections  
3: Select USB Mode  
4: IMS Settings  
7: Software Update  
8: Application Settings  
1: Messaging Settings  
2: Browser Settings  
3: Camera Settings  
4: Camcorder Settings  
5: Player Settings  
6: Cellular Video Settings  
7: Record Audio Settings  
8: Calendar Settings  
9: Address Book Settings  
10: Video Share Settings***  
9: Security  
Menu Navigation 46  
1: Phone Lock  
2: SIM Lock  
3: PIN Check  
4: Lock Applications  
5: FDN Mode  
6: Change Phone Password  
7: Change PIN Code  
8: Change PIN2 Code  
10: Reset Settings  
1: All  
2: Phone Settings  
3: Display Settings  
4: Profiles  
5: Alarms  
11: Memory Settings  
1: Clear Memory  
2: Memory Status  
12: Phone Information  
1: My Number  
2: Manufacturer  
3: Model  
4: Device ID  
5: Hardware Version  
6: Software Version  
7: Language  
8: Client Version  
*
Shows only if supported by your SIM card.  
** Shows when a memory card is inserted.  
*** Shows only if you have Video Share service.  
47  
Changing the Text Input Method  
Section 5: Entering Text  
Topics Covered  
This section outlines how to select the desired text input mode when entering  
characters into your phone. This section also describes how to use the T9 predictive  
text entry system to reduce the amount of key strokes associated with entering text.  
Changing the Text Input Method  
The Text Input option switches the key entry functions from an T9 Alphabet,  
ABC (Alphabet), Numeric Mode, and Symbols Mode.  
T9 Input Method (T9 abc, T9 Abc, and T9 ABC)  
This input method allows you to enter words with only one keystroke per letter. Each  
key on the keypad has more than one letter; for example, pressing the 5 key can  
enter J, K, or L. However, the T9 method automatically compares the series of  
keystrokes you make with an internal linguistic dictionary to determine the most  
likely word, thus requiring far fewer keystrokes than the traditional Alphabet mode.  
The T9 abc method makes all characters lowercase. The T9 Abc method makes the  
initial character an uppercase while the remaining characters are left as lowercase.  
The T9 ABC method all characters uppercase.  
ABC (Alphabet) Input Method (abc and ABC)  
This input method allows you to enter letters by pressing the key labeled with the  
letter you want. Press the key once, twice, three, or four times until it displays.  
The abc method makes all characters of the word lowercase. The ABC method  
makes all characters of the word uppercase.  
Entering Text 48  
               
Numeric  
Symbols  
This mode allows you to enter numbers.  
This mode allows you to enter symbols, such as punctuation marks.  
Add word  
This mode allows you to add new words to the phone’s current dictionary.  
When you are in a field that allows characters to be entered (such as in a  
text message), you will notice the text input mode indicator on the display.  
1. To change the text input mode, press the  
key.  
2. Highlight Input Method and press the  
key. The default mode is Abc.  
3. Choose from the following options:  
ABC: abc (all lowercase), Abc (initial capitalization) and ABC (all  
uppercase).  
T9: T9 abc (completed words are all lowercase), T9 Abc (completed words  
are initial uppercase) and T9 ABC (completed words are all uppercase).  
Numeric: configures the keypad to be used only to enter numbers into a  
text message.  
Symbols: provides an on screen table which allows you to select from the  
list of available symbols associated to each keypad.  
Note: Press and hold the  
key to access Symbol mode. Press the number key corresponding to the  
symbol you want to enter. Use the Up and Down Navigation keys to scroll through the available  
symbols. Press the Cancel soft key to exit.  
Using the T9 Input Method  
T9 Predictive Text input method is based on a built-in dictionary.  
Enter a Word in T9 Mode  
1. In T9 method, begin entering a word by pressing the 2 to 9 keys. Press  
each key only once for each letter. The built-in dictionary lists words that  
match the keystrokes you have entered.  
2. Example: To enter “Hello”, press  
,
,
,
,
The word that you are typing appears in the display. It may change with  
each key that you press.  
49  
           
Using the Alphabet Input Method  
3. Enter the whole word before editing or deleting the keystrokes.  
4. When the word displays correctly, go to step 5.  
If the word doesn’t display correctly, press the  
key to display  
alternative word choices for the keys that you have pressed.  
Example: Both “Of” and “Me” have the  
choice first.  
and  
keys. The phone displays the most commonly used  
5. Insert a space by pressing the  
key and start entering the next word.  
Add a New Word into the T9 Dictionary  
1. After pressing the keys corresponding to the word you want to add, press  
the  
key to display the alternative words.  
2. When the last alternative word is displayed, Spell displays. Press the Spell  
soft key.  
3. Enter the word you want to add using the ABC mode.  
4. Press the Add soft key or the  
key.  
The word is added to the T9 dictionary and becomes the first word for the  
associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, colons, or parenthesis, press and hold the  
key.  
T9 mode applies grammar rules to ensure that correct punctuation is used.  
To shift case in T9 mode, use the  
lock, Lower case, and Numeric.  
key. There are 4 cases: Initial capital, Capital  
You can move the cursor by using the Left and Right keys. To delete letters, press  
the key. Press and hold the key to clear the display.  
Using the Alphabet Input Method  
To use the ABC Alphabet input method use the  
to  
keys to enter your text.  
1. Press the key labeled with the letter you want:  
Once for the first letter  
Twice for the second letter  
And so on  
2. Select the other letters in the same way.  
Entering Text 50  
   
Note: The cursor moves to the right when you press a different key. When entering the same letter twice or  
a different letter on the same key, just wait for a few seconds for the cursor to move to the right  
automatically, and then select the next letter.  
Keys  
Using the Symbols Input Method  
The Symbol input method enables you to insert symbols and punctuation marks into  
text.  
1. To enter symbol mode press and hold the  
key.  
2. Use the Navigation keys to select an on screen symbol group.  
3. To select a symbol from that group, press the corresponding number key.  
4. To clear the symbol(s), press the  
key. When the input field is empty,  
this key returns the display to the previous mode.  
5. To return to your message, press the OK soft key or the  
key.  
51  
   
Using the Numeric Input Method  
Using the Numeric Input Method  
The Numeric mode enables you to enter numbers into a text message. Press the  
keys corresponding to the digits you want to enter.  
Entering Text 52  
   
Section 6: Understanding Your Address Book  
Topics Covered  
This section allows you to manage your daily contacts by storing their name and  
number in your Address Book. Address Book entries can be sorted by name, entry, or  
group.  
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot  
location are saved. To save additional information for a particular contact, such as notes, e-mail,  
dates, etc.., it is important to save that Contact into your phone’s onboard memory.  
Using Contacts List  
Dialing a Number from Address Book  
Once you have stored phone numbers in the Address Book, you can dial them easily  
and quickly by either using their SIM card location number or by using the Search  
field to locate the entry.  
Note: The default Address Book entries are: Check Bill Balance - *225#, Directory Assistance - 411,  
Music ID - #43, Pay My Bill - *729, View My Minutes - *646#, Voice Connect - *08, *Now - *669.  
53  
         
Address Book Entry Options  
Finding an Address Book Entry  
You can store phone numbers and their corresponding names onto your SIM card  
and phone’s onboard memory. They are physically separate but are used as a single  
entity, called the Address Book.  
Depending on your particular SIM card, the maximum number of phone numbers the  
SIM card can store may differ.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, and press the Select soft key or the  
key.  
3. Enter the first few letters of the name.  
The Address Book entries are then listed, starting with the first entry  
matching your input.  
4. To select a different entry, press the Up or Down Navigation key until the  
entry you want is highlighted.  
5. Once you have found the entry, press the  
key to dial the number, or  
press the Options soft key to access the Address Book entry options.  
Address Book Entry Options  
While accessing any Address Book entry, press the Options soft key to use the  
options for the entry.  
The following options are available:  
View: provides you with details about that contact entry. Press the Back soft key to  
return to the Address Book listing.  
Add New Contact: allows you to add a new entry to either your Phone or SIM card.  
Voice Call: allows you to call a currently selected entry.  
Video Share: innitiates a Video Share Call with this contact.  
Send Message: allows you to send a text message or a multimedia message to  
the selected entry.  
Edit: allows you to edit the properties of an entry such as: Name, Category, Group,  
or location. Press the  
key to save your changes.  
Duplicate: allows you to duplicate a selected entry. Press the  
key to save your  
duplicate entry.  
Delete: allows you to delete either a selected address book entry or multiple  
entries from a target location such as the Phone and/or SIM card.  
Save to My Stuff: allows you to copy the contact information from its current  
location to your My Stuff folder.  
Understanding Your Address Book 54  
     
Send Business Card: allows you to send a message to the selected entry which  
contains the information from their Address Book entry which you have on file.  
This can be sent as either a message or via Bluetooth.  
My Business Card: allows you to send a name card message to the selected  
entry. This name card contains your name cards with your number and profile.  
Assign Speed Dial: allows you to set the speed dial key for this entry.  
Copy to Phone/SIM: allows you to copy the contact information from the SIM to  
the phone or from your phone to your SIM.  
Move to Phone/SIM: allows you to move the contact information from the SIM to  
the phone or from your phone to your SIM.  
Service Number: allows you to search through your address book listings of saved  
service numbers.  
FDN Contacts: Fixed Dialling Number mode restricts your outgoing calls to a  
limited set of phone numbers. When this feature is enabled, you can make calls  
only to phone numbers stored on the SIM FDN list.  
Copy to FDN Contacts: allows you to copy the list of restricted phone numbers  
from your phone to the FDN section of the SIM card.  
Print via Bluetooth: allows you send the selected contact entry information to a  
Bluetooth compatible printer.  
Address Book Settings: allows you to access the address book settings menu list.  
Memory Status: allows you to view the amount of memory allocation for the  
following categories: Phone, USIM, Additional No.1 (SIM card), Additional No.2,  
Email, and FDN.  
Adding a New Contact  
Use the following procedures to store a new contact to your Phone or SIM Card.  
Storing a Number in the Phone’s Memory  
1. When the Idle screen displays, enter the phone number.  
2. Press the Options soft key.  
3. Scroll to Save to Address Book by pressing the Up or Down key and  
press the Select soft key or the  
4. Choose the target location for the entry (Phone or SIM), press the Select  
soft key or the key.  
key.  
5. Press the Select soft key or the  
key to assign this number as a New  
entry.  
6. From the Select Type screen, select from the following category types:  
55  
       
Adding a New Contact  
• Mobile - Private: assigns the number entered as a Private Mobile entry.  
• Mobile - Business: assigns the number entered as a Business Mobile entry.  
• Landline - Private: assigns the number entered as a Private Landline entry.  
• Landline - Business: assigns the number entered as a Business Landline  
entry.  
• FAX: assigns the number entered as a Fax entry.  
• Etc.: allows you to classify the entry as a miscellaneous type.  
7. Enter alphanumeric characters into each of the available fields:  
• First Name: allows you enter a first name for this entry.  
• Last Name: allows you enter a Last name for this entry.  
• Display Name: allows you enter a display name for this entry which then  
appears when you receive a call from this contact.  
• Phone Number: allows you keep or alter the currently entered phone number.  
• Number Type: allows you to enter an additional landline-private number to this  
entry.  
• Contact E-mail: allows you to enter a contact E-mail address for this entry.  
• Group: allows you to assign this contact to group. Press the Options soft key to  
display available groups. Use the Up or Down Navigation keys to select a group.  
Press the Select soft key or the  
• Caller ID: allows you to set a graphic to the Caller ID for this contact. Press the  
Options soft key or the key to access the My Stuff menu.  
• Ringtone: allows you to choose a ringtone for this contact information. Press the  
Options soft key or the key to access the My Stuff menu.  
• Instant Messaging: allows you to assign an Instant Message profile to this  
entry. Press the key to access the IM menu.  
• Note: allows you enter notes associated with this contact.  
key to save your selection.  
8. Press the Options soft key or the  
key to save the information for this  
entry.  
Understanding Your Address Book 56  
Storing a Number in the SIM Card  
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot  
location are saved. To save additional information for a particular contact, such as notes, e-mail,  
dates, etc.., it is important to save that Contact into your phone’s onboard memory.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, and press the Select soft key or the  
key.  
3. Select the Address Book entry you wish to add and press the Options soft  
key.  
4. Scroll to Add New Contact by pressing the Up or Down key and press the  
Select soft key or the  
key.  
5. Select SIM and press the Select soft key or the  
key.  
6. Enter the following information for the New Contact.  
• Name: allows you to enter a name for the number entered.  
• Phone Number: assigns the number entered to the Mobile entry.  
• Location: allows you to assign a location number on your SIM for the number  
being entered.  
7. Press the  
key to save your new entry and return to a screen which then  
lists the details of your new entry onto the SIM.  
8. To view available options for this entry, press the Options soft key:  
• Edit: allows you to edit the properties of an entry such as: Name, Number, or  
Location. Press the  
key to save your changes.  
• Voice Call: allows you to call a currently selected entry.  
• Video Share: innitiates a Video Share Call with this contact.  
• Send Message: allows you to send a text message or a multimedia message to  
the selected entry.  
• Duplicate: allows you to duplicate a selected entry. Press the  
your duplicate entry.  
key to save  
• Delete: allows you to delete the currently selected address book entry from a  
target location.  
• Save to My Stuff: allows you to copy the contact information from its current  
location to your My Stuff folder.  
• Send Business Card: allows you to send a message to the selected entry  
which contains the information from their Address Book entry which you have on  
file. This can be sent as either a message or via Bluetooth.  
• Copy to Phone: allows you to copy the contact information from the SIM to the  
phone or from your phone to your SIM.  
57  
 
Dialing a Number from the SIM Card using the Location Number  
• Move to Phone: allows you to move the contact information from the SIM to the  
phone or from your phone to your SIM.  
• Copy to FDN Contacts: allows you to copy the restricted phone number list to  
the FDN section of the SIM card.  
• Print via Bluetooth: allows you send the selected contact entry information to a  
Bluetooth compatible printer.  
9. To return to the Idle screen, press the  
key.  
Dialing a Number from the SIM Card using the Location  
Number  
1. In Idle mode, enter the location number for the phone number you want to  
dial and press the  
key.  
The contact entry information is displayed.  
2. Press the Up or Down Navigation key to find other numbers on the list.  
3. Press the Call soft key, the  
key, or the  
key when you have  
selected the number you want to call.  
Speed Dial  
Once you have stored phone numbers from your Address book list, you can set up to  
8-speed dial entries and then dial them easily whenever you want, simply by  
pressing the associated numeric key.  
In Idle mode, to speed dial the numbers assigned to keys (2 to 9), press and hold the  
appropriate key.  
Setting Up Speed Dial Entries  
1. From the Idle Screen, press  
Menu. Use the navigation keys to highlight  
Select.  
Recent Calls and press  
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and  
press the Select soft key or the key.  
3. Select the key in which you wish to assign the speed-dialing number (from  
the 2 to 9 keys), and press the Options soft key or the  
Note: Memory location 1 is reserved for your Voice mail server number.  
4. Highlight Add and press the Select soft key or the  
key.  
key. You can choose  
to assign a number from your Address Book or FDN contacts.  
5. Highlight Address Book and press the Select soft key or the  
key.  
Understanding Your Address Book 58  
       
Select the Address Book entry you would like to add by pressing the Up or  
Down key and press the Select soft key or the key to save the entry.  
6. Highlight FDN Contacts and press the Select soft key or the key.  
Select the FDN entry you would like to add by pressing the Up or Down key and  
press the Select soft key or the key to save the entry.  
Changing a Number Assigned to a Key  
1. From the Idle Screen, press  
Menu. Use the navigation keys to highlight  
Select.  
Recent Calls and press  
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and  
press the Select soft key or the key.  
3. Select the key you wish to change and press the Options soft key.  
4. Press Change, select the location of the new entry (Address Book or FDN  
Contacts), and press the Select soft key or the  
key.  
5. Use either steps 5 or 6 from the previous section to add the Address Book  
or FDN Contacts entry.  
6. Once you’ve selected your entry (by name or number), press the Select  
soft key or the  
key to confirm the change.  
7. After the “Change Speed Dial?” screen appears, press the Yes soft key to  
save the new speed dial entry and overwrite the previous information.  
8. When you are finished, press the  
Deleting Speed Dial Entries  
1. From the Idle Screen, press  
key to return to Idle mode.  
Menu. Use the navigation keys to highlight  
Recent Calls and press  
2. Highlight Speed Dial by pressing the Up or Down Navigation key, and  
press the Select soft key or the key.  
Select.  
3. Select the key you wish to clear and press the Options soft key.  
4. Select Remove and press the Yes soft key to confirm your deletion.  
5. When you are finished, press the  
key to return to Idle mode.  
59  
Finding My Own Phone Number  
Finding My Own Phone Number  
This function is a memory aid, which you can use to check your own phone number  
if you need to do so.  
You can assign a name to each of your own phone numbers registered on your SIM  
card. You can also edit the names and numbers. Any changes made here do not in  
any way affect the actual subscriber numbers on your SIM card.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Settings, press the Select soft key or the  
3. Select Phone Information by pressing the Up or Down key and press the  
Select soft key or the key.  
FDN Mode  
key.  
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your  
outgoing calls to a limited set of phone numbers. When this feature is enabled, you  
can make calls only to phone numbers stored in the FDN list on the SIM card.  
The following options are available:  
Disable: you can call any number.  
Enable: you can only call the phone numbers stored in the SIM FDN list.  
You must enter your PIN2 password.  
Group Settings  
Editing a Caller Group  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Scroll to Groups by pressing the Right Navigation key.  
4. Scroll through the list of groups by pressing the Up or Down Navigation  
key.  
5. Highlight the target group entry and press the Options soft key.  
6. Highlight Group Settings, press the Select soft key or the  
The following options are then available:  
key.  
• Picture: allows you to view the assigned group image.  
• Ringtone: allows you to set the ringtone associated with this group. Choose  
from the Default Ringtones or from the Downloaded Ringtones.  
Understanding Your Address Book 60  
           
7. Once you’ve made your changes, press the Options soft key, select Save  
and press the Select soft key or the  
key.  
8. When you are finished, press the  
key to return to Idle mode.  
Managing Address Book Entries  
You can copy, delete, and view the memory status for the Phone and SIM entries on  
your phone.  
Copying an Entry to the Phone  
You can copy a SIM entry to the Phone by using the Duplicate option. When you copy  
entries to the phone, duplicate entries are created.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Select an entry which currently resides on the phone.  
If the entry’s associated Group graphic has a SIM location icon on it, then the  
entry already exists on the SIM card. This is the type you can duplicate.  
If the entry’s associated Group image does not have a SIM location icon, then  
this entry currently also exists on the phone.  
4. Press the Options soft key, highlight Copy to Phone, and press the Select  
soft key or the  
key.  
5. When you are finished, press the  
key to return to Idle mode.  
Note: Options are available for phone entries that are not available when stored to the SIM card. For details  
Deleting All of the Address Book Entries  
You can delete All, Phone, SIM, and SIM (FDN) entries from your phone’s memory.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
3. Press the Options soft key, highlight Delete, and press the Select soft key  
or the key.  
4. Highlight Multiple, press the Select soft key or the  
5. Choose the location of the Address Book entries you wish to delete (Phone,  
key.  
key.  
SIM, or Phone & SIM), press the Select soft key or the  
6. Highlight All and press the key.  
You can remove the check mark by pressing the  
key.  
key again. Selecting  
All places a checkmark adjacent to every entry in the list.  
61  
       
Managing Address Book Entries  
7. Press the Delete soft key to delete the entries from the selected memory  
location.  
8. At the Delete? confirm screen, press the Yes soft key to continue, or the  
No soft key to cancel.  
9. Enter the password and press the Confirm soft key or the  
key.  
10. When you are finished, press the  
key to return to Idle mode.  
Checking the Memory Status  
You can check how many names and numbers are stored in the Address book, in  
both SIM card and the phone memory. You can also see the capacity of both  
memories.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Press the Options soft key.  
4. Select Memory Status by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
5. When you are finished viewing your phone’s Memory Status, press the  
key to return to Idle mode.  
Using the Service Dialing Numbers  
You can view the list of Service Dialing Numbers (SDN) assigned by your service  
provider. These numbers include emergency numbers, customer service numbers  
and directory inquiries.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Address Book, press the Select soft key or the  
key.  
3. Press the Options soft key.  
4. Select Service Number, by pressing the Up or Down Navigation key and  
press the Select soft key or the key.  
5. Scroll through the numbers by using the Up or Down Navigation key.  
6. To dial the number displayed, press the key.  
Note: This menu is available only when your SIM card supports Service Dialing Numbers.  
Understanding Your Address Book 62  
   
Section 7: Messaging  
Topics Covered  
This section describes how to send or receive different types of messages. It also  
includes the features and functionality associated with messaging.  
Types of Messages  
Your phone provides the following message types:  
IM Messages  
Text Messages  
Multimedia Messages  
Creating and Sending New Messages  
Text Messages  
The Short Message Service (SMS) allows you to send and receive short text  
messages to and from other mobile phones. To use this feature, you must subscribe  
to your service provider’s message service.  
The Message icon ( ) displays when you have received new text messages. When  
the memory is full, an error message displays and you cannot receive any new  
messages. Use the Delete option in each message box to delete obsolete messages.  
63  
             
Text Messages  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Messaging and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key, highlight Create New Message and  
press the Select soft key or the key.  
4. Enter either a phone number or contact name (from your Address Book) by  
pressing the key to access both a list of recent calls and your Address  
Book Contacts and Groups.  
• Recent Log: allows you to choose from a brief list of recently dialed phone  
numbers. Press the  
key to add a selected number to your message’s  
recipients list field. This entry can later be appended prior to sending the  
message.  
• Contacts: allows you to insert additional recipients from your Address Book by  
using your Up and Down Navigation keys to select those entries you wish to add.  
-
Press the  
key to place a checkmark next to those entries.  
-
Once you have selected the desired entries, press the Add softkey to return to  
the message.  
• Group: allows you to insert additional Group members from your Address Book  
by using your Up and Down Navigation keys to select those entries you wish to  
add.  
• FDN Contacts: allows you to insert numbers assigned to your Fixed Dial  
Network (FDN) group.  
5. Use the Down Navigation key to access the text field and begin creating  
your text message.  
6. When you have finished writing your message, press the Options soft key.  
Choose from the following options:  
• Send: allows you to send the message.  
Text: allows you to set the Text Selection on or off, Cut previously entered  
text, Copy text, or Remove text before sending.  
• Add Item: allows you to add an image, sound or video clip to your message.  
• Create Item: allows you to temporarily exit from the current text message and  
create either a new photo, video clip, or audio clip for your current text message.  
-
-
-
Take Photo: allows you to temporarily exit the message, take a photo with  
phone’s camera, and then add it to your message.  
Record Audio: allows you to temporarily exit the message, record an audio clip  
using the phone’s microphone, and then add it to your message.  
Record Video: allows you to temporarily exit the message, record a video clip  
using the phone’s camera, and then add it to your message.  
Messaging 64  
• Insert: allows you to insert a predefined Text template, Text emoticon, Business  
card, or favorite web address into the message.  
-
-
-
-
Text Template: allows you to insert one of the preset message templates to the  
text, such as (Out of Office, I’m in a meeting..).  
Text Emoticon: allows you to add an a emotion (created by phone characters) to  
your message. An example would be:  
which creates a :-) “happy face”.  
Business Card: allows you to add the contact information for an entry from  
Address Book directly to your message.  
Favorites: allows you to add a web address from your Favorites list of Internet  
sites to the message.  
• Add Recipients: allows you to update the recipient list by appending it with  
information form either your Recent Log, Contacts, or Group FDN Contacts  
entries.  
• Change to Multimedia Message: allows you to convert the current message  
to/from either a text or multimedia message prior to being sent.  
Note: A multimedia message should only be sent to a phone which can support the receipt and display of  
this message type.  
• Input Language: allows you to temporarily change the input language used to  
create your message.  
• Input Method: allows you to change the method used to input data into your  
message, such as text, numbers, and symbols. For more information, refer to  
• Add Attachment: allows you to add either a file, card, or other information such  
as a calendar entry, task, or note.  
-
-
-
-
-
-
-
-
File: allows you to insert an audio, graphic, or video clip to your message as an  
attached file.  
Business Card: allows you to insert the contact information for an entry from  
Address Book directly to your message as an attached file.  
Appointment: allows you to insert an Appointment entry from your calendar  
directly to your message as an attached file.  
Anniversary: allows you to insert an Anniversary entry from your calendar  
directly to your message as an attached file.  
Private: allows you to insert a Private entry from your calendar directly to your  
message as an attached file.  
Holiday: allows you to insert a Holiday entry from your calendar directly to your  
message as an attached file.  
Important: allows you to insert an entry from your calendar tagged as Important  
directly to your message as an attached file.  
Task: allows you to insert an entry from your calendar tagged as a Task directly  
to your message as an attached file.  
65  
Text Messages  
-
-
Note: allows you to insert a presaved Note (text) directly to your message as an  
attached file.  
Favorites: allows you to add a web address from your Favorites list of Internet  
sites as an attachment to the message.  
• Back: allows you to return to the active message.  
7. Press the Send To soft key, confirm the recipient(s). You can add additional  
recipients from you Address Book by selecting one of the Empty fields and  
pressing the  
key.  
Add the additional recipients from your Address Book by then using your Up and  
Down Navigation keys to select those entries you wish to add.  
Press the  
key to place a checkmark next to those entries.  
Once you have selected the desired entries, press the Add softkey to return to  
the previous list of Recipients.  
8. Send the message to the selected recipients by either pressing the Send  
soft key or the  
key.  
Multimedia  
The Multimedia Message icon ( ) displays when you have received new  
multimedia messages. When the memory is full, an error message displays and you  
cannot receive any new messages. Use the Delete option in each message box to  
delete obsolete messages.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Messaging and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Create New Message and  
press the Select soft key or the key.  
4. Enter either a phone number or contact a contact name (from your Address  
Book) by pressing the key to access both a list of recent calls and your  
key.  
Address Book Contacts and Groups.  
• Recent Log: allows you to choose from a brief list of recently dialed phone  
numbers. Press the  
key to add a selected number to your message’s  
recipients list field. This entry can later be appended prior to sending the  
message.  
• Contacts: allows you to insert additional recipients from your Address Book by  
using your Up and Down Navigation keys to select those entries you wish to add.  
-
Press the  
key to place a checkmark next to those entries.  
-
Once you have selected the desired entries, press the Add softkey to return to  
the message.  
Messaging 66  
• Groups: allows you to insert additional Group members from your Address Book  
by using your Up and Down Navigation keys to select those entries you wish to  
add.  
• FDN Contacts: allows you to enter a contact from the FDN Contact list.  
5. Use the Down Navigation key to access the text field and begin creating  
your message.  
6. Press the Options soft key, highlight the Change to Multimedia Message  
and press the Select soft key or the  
key.  
Note: A multimedia message should only be sent to a phone which can support the receipt and display of  
this message type.  
7. Add an Image, Sound, or Video clip directly into your message by pressing  
the Options soft key and selecting from one of the following options:  
• Send: allows you to send the message.  
• Preview: allows you to preview your message prior to being sent.  
Text: allows you to enter, cut, copy, and remove text from your message prior to  
being sent.  
• Add Item: allows you to add an image, sound or video clip to your message.  
• Create Item: allows you to temporarily exit from the current text message and  
create either a new photo, video clip, or audio clip for your current text message.  
-
-
-
Take Photo: allows you to temporarily exit the message, take a photo with  
phone’s camera, and then add it to your message.  
Record Audio: allows you to temporarily exit the message, record an audio clip  
using the phone’s microphone, and then add it to your message.  
Record Video: allows you to temporarily exit the message, record a video clip  
using the phone’s camera, and then add it to your message.  
• Insert: allows you to insert a predefined Text template, Text emoticon, Business  
card, or favorite web address into the message.  
-
-
-
-
Text Template: allows you to insert one of the preset message templates to the  
text, such as (Out of Office, I’m in a meeting..).  
Text Emoticon: allows you to add an a emotion (created by phone characters) to  
your message. An example would be:  
which creates a :-) “happy face”.  
Business Card: allows you to add the contact information for an entry from  
Address Book directly to your message.  
Favorites: allows you to add a web address from your Favorites list of Internet  
sites to the message.  
• Add Recipients: allows you to update the recipient list by appending it with  
information form either your Recent Call Log, Contacts, Group entries , or FDN  
Contacts .  
67  
Text Messages  
• Change to Text Message: allows you to convert the multimedia message back  
to a text-based message which can contain multimedia files as attachment and  
not as part of the main body of the message.  
• Add Page: allows you to add a text page to your multimedia message.  
• Input Language: allows you to change the language used for the message text.  
• Input Method: allows you to change the method used to input data into your  
message, such as text, numbers, and symbols. For more information, refer to  
• Edit Style: allows you to edit the style of your outgoing message with option  
such as: Select page, Background Color, Page Duration (for embedded media),  
Font Color, and Font Style.  
• Add Subject: allows you to add a subject header to your multimedia message.  
• Add Attachment: allows you to add either a file, card, or other information such  
as a calendar entry, task, or note.  
-
-
-
-
-
-
-
File: allows you to insert an audio, graphic, or video clip to your message as an  
attached file.  
Business Card: allows you to insert the contact information for an entry from  
Address Book directly to your message as an attached file.  
Appointment: allows you to insert an Appointment entry from your calendar  
directly to your message as an attached file.  
Anniversary: allows you to insert an Anniversary entry from your calendar  
directly to your message as an attached file.  
Private: allows you to insert a Private entry from your calendar directly to your  
message as an attached file.  
Holiday: allows you to insert a Holiday entry from your calendar directly to your  
message as an attached file.  
Important: allows you to insert an entry from your calendar tagged as Important  
directly to your message as an attached file.  
-
-
Task: allows you to insert a Task directly to your message as an attached file.  
Note: allows you to insert a presaved Note (text) directly to your message as an  
attached file.  
-
Favorites: allows you to add a web address from your Favorites list of Internet  
sites as an attachment to the message.  
• Sending Options: allows you to configure the options associated with sending  
the message.  
• Save to Drafts: saves the current message to the Drafts folder.  
• Save as Template: allows you to save the current text message or multimedia  
message to the current list of preset message templates, such as (Out of Office,  
I’m in a meeting..).  
• Back: allows you to return to the active message.  
Messaging 68  
8. Press the Send To soft key, confirm the recipient(s). You can add additional  
recipients from you Address Book by selecting one of the Empty fields and  
pressing the  
key.  
Add the additional recipients from your Address Book by then using your Up and  
Down Navigation keys to select those entries you wish to add.  
Press the  
key to place a checkmark next to those entries.  
Once you have selected the desired entries, press the Add softkey to return to  
the previous list of Recipients.  
9. Send the message to the selected recipients by either pressing the Send  
soft key or the  
key.  
Locating a Message  
1. In Idle mode, press the Menu soft key and highlight Messaging. Press the  
Select soft key or the  
key.  
2. Highlight Inbox and press the Select soft key. The message list opens.  
The following icons indicate the message type.  
: indicates a new Voice message (This is an icon not identifiable in the  
Inbox but rather under "Idle Pop up" or the Icons in the Icon area.)  
: indicates a new Text message  
: indicates a new Multimedia message  
: indicates a new E-mail message (This is an icon not identifiable in the  
Inbox but rather under "Idle Pop up" or the Icons in the Icon area.)  
Retrieving a Text Message  
When a new Text message comes in, the display (in Idle mode) shows a new  
Message notification icon ( ) along with the available sender’s information.  
1. Press the View soft key to launch the Inbox list of message.  
2. Use the Up or Down Navigation keys to select the message.  
3. Press the  
key to open the message.  
key.  
4. When you have finished, press the  
Retrieving an Multimedia Message  
When a new Multimedia message comes in, the display shows the Multimedia  
Message icon (  
) and a text notification along with the sender’s number.  
1. Use the Up or Down Navigation keys to select a message from the list.  
69  
Using Message Options  
2. Press the Options soft key, highlight Properties, and press the Select  
soft key or the  
key to view brief information about the message, such  
as the sender’s number, the message size, and the subject.  
If you want to view the message later in the Inbox, press the Back soft key.  
3. To view the message, highlight View, and press the Select soft key or the  
key.  
4. To play the multimedia message, press the  
key.  
To pause the audio/video clip, press the  
key.  
To stop the audio/video clip press the Stop soft key.  
5. To scroll through the message (if additional text page have been added),  
press the Up or Down key.  
6. When you have finished, press the  
key.  
Note: Messages can also be accessed by navigating to your Inbox (Menu > Messaging).  
Using Message Options  
While viewing the content of a message, press the Options soft key to access the  
following message options:  
Options for SMS Messages  
Reply: allows you to reply to the message via Text message.  
Forward: allows you to forward the message.  
Call Back: allows you to dial the originating message number.  
Delete: deletes the message.  
Move to Phone/Move to SIM: If a message is stored in the SIM card, it is saved to  
the phone’s memory. If a message is stored in the phone’s memory it is then saved  
to the SIM card.  
Add to Address Book: allows you to save the recipient or sender’s information  
from the message to your Address Book on either the Phone or SIM.  
Note: When storing an Address Book entry into your SIM card, note that only the Name, Address, and slot  
location are saved. To save additional information for a particular contact, such as notes, e-mail,  
dates, etc.., it is important to save that Contact into your phone’s onboard memory.  
Print via Bluetooth: allows you to print the content of the text message wirelessly  
to a target Bluetooth-compatible printer.  
Messaging 70  
 
Options for Multimedia Messages  
View/Play: allows you to view or play the multimedia message.  
Reply: allows you to reply to the message.  
Reply to All: allows you to reply to the all recipients of the message.  
Forward: allows you to forward the message to another person.  
Delete: allows you to delete the selected or all messages.  
Move to My Folder: moves the message to the phone’s My Folder location.  
Save as Template: saves to the message as a template for this message type.  
This template can be used to save time during the creation of the next similar  
message.  
Save Items: saves the multimedia content to the My Stuff folder.  
Add to Address Book: allows you to save the recipient or sender’s information  
from the message to your Address Book on either the Phone or SIM.  
Print via Bluetooth: allows you print the contents of the message on a Bluetooth  
compatible printer.  
Lock: locks the message.  
Properties: displays some of the file properties for the message such as: sender,  
date/time, file size, priority, etc..  
Using Instant Messenger (IM)  
The Instant Messaging function allows you to send and receive instant messages  
using AIM, Windows Live, and Yahoo communities. You must first create a default  
community account before accessing it on your phone. To access your default  
community session settings, use the following steps:  
Default Community Settings  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
3. Select IM and press the Select soft key or the key.  
4. Select Settings and press the Select soft key or the  
key.  
key.  
5. Select Choose Your Community and press the Select soft key or the  
key. This is the service that will load when you press the IM soft key.  
6. Use the Navigation keys to highlight your option, and press the Select soft  
key or the  
key to save your selection.  
71  
 
Signing into your IM Account  
Signing into your IM Account  
Although each account type differs, the initial sign in procedure is common to all  
supported types. Before beginning the sign in procedure, you must complete the  
previous procedures for selecting your default IM Community.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
3. Select IM and press the Select soft key or the key.  
4. Select Sign In/On and press the Select soft key or the  
key.  
key.  
5. Use the Navigation keys to select each log in field and then use the keypad  
to enter the appropriate information.  
6. Press the Options soft key. Highlight Sign In and press the Select soft key  
or the  
key.  
Signing into your Mobile Email  
Take your email with you! With Mobile Email you can check your Yahoo!® Mail, AOL®,  
Windows Live Hotmail, AT&T Yahoo!®, BellSouth, and AIM quickly and easily from the  
SYNCTM  
.
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
3. Select Mobile Email and press the Select soft key or the  
key.  
key.  
4. Use the Navigation keys to select an e-mail carrier of your choice and  
press the Select soft key or the key.  
5. Use the Navigation keys to select which domain your personal account  
uses (e.g., "@hotmail.com") and press the Select soft key or the  
key.  
6. Type in your personal Email address (e.g., "silverfox2"), then enter your  
account's Password and press the Sign In soft key. You will be connected  
to your account's Inbox and contacts, where you can send and receive  
emails.  
Using Message Templates  
Your phone has message templates (both SMS and MMS) which allows you to  
retrieve them when creating a message. You can change the templates as your  
preferences or send a message immediately.  
1. When the Idle screen displays, press the Menu soft key.  
Messaging 72  
             
2. Select Messaging and press the Select soft key or the  
Templates and press the Select soft key or the key.  
3. Highlight a template type (Text or Multimedia) and press the Select soft  
key or the key.  
key. Highlight  
4. Use the Up or Down Navigation Keys to select a current template message  
and press the Options soft key to access the following options:  
• Send: allows you to send an SMS and MMS message using the template.  
• Add New: allows you to add a new the template.  
• Edit: allows you to change the currently selected template.  
• Delete: deletes the currently selected template.  
5. When you have finished, press the  
key.  
Deleting Messages  
You can delete the messages in each message folder(s) individually or all at one  
time. You can also delete all of your messages at one time.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
key.  
key.  
3. Highlight Delete All and press the Select soft key or the  
4. Using the Up or Down Navigation key to select the message folder(s) you  
want to empty.  
5. Press the  
key to mark the folder you want to delete.  
• All: allows you select all of the list items and mark each one for content deletion.  
• Inbox: allows you select the your Inbox folder and mark its files for deletion.  
• Sent: allows you select the your Sent folder and mark its files for deletion.  
• Outbox: allows you select the your Outbox folder and mark its files for deletion.  
• Drafts: allows you select the your Drafts folder and mark its files for deletion.  
• My Folder: allows you select the your My Folder and mark its files for deletion.  
To view the contents in each folder, use the Right key to display the  
folder’s contents or use the Left key to close the folder’s contents.  
To delete all of the messages in all folders, select All.  
6. Press the Delete soft key. At the “Delete?” pop-up, press the Yes soft key  
or the  
key to delete.  
7. When you have finished, press the  
key.  
73  
 
Messaging Settings  
Messaging Settings  
You can set up various options for using messaging services.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
key.  
3. Highlight Messaging Settings and press the Select soft key or the  
key.  
4. Select the type of messages for which you want to change.  
Text Message  
• Multimedia Message  
• Voice Mail  
• Push Message  
5. Press the Select soft key or the  
Text Message  
The following options are available:  
key.  
Sending Options: allows you to set the following options:  
• Keep a Copy: allows you to keep a copy of your sent messages.  
Text Message Center Settings: allows you to set the default method of text  
message transmission used by the Text Message Center. The options are:  
• SMS Settings: allows you to configure the text delivery parameters used when  
sending this type of message.  
• Email Settings: allows you to configure the Email parameters used when  
sending this type of message.  
• Empty: allows you to configure a new Text Message Center profile for use when  
sending this type of message.  
Multimedia Message  
The following options are available:  
Sending Options:  
• Priority: you can select the priority level of your messages.  
• Expiration: select the length of time you wish the message you sent to remain  
on the MMS server.  
• Delivery: you can set a time delay before the phone sends your messages.  
• Message Size: you can set the maximum allowed size for a multimedia  
message.  
• Request Delivery Report: when this option is enabled, the network informs  
you whether or not your message has been delivered.  
Messaging 74  
   
• Request Read Report: when this option is enabled, your phone sends a  
request for a reply along with your message to the recipient.  
• Keep a Copy: you specify whether you want to keep a copy of the sent  
messages on your phone.  
• Add My Business Card: you send your content information along with your  
sent messages.  
Receiving Options: you can specify the category of messages you want to  
receive. Allows you to set the following:  
• Download Type: allows you to set the message receipt options. Choose from  
Auto Download, Manual, or Reject.  
• Send Delivery Report: when this option is enabled, the phone allow the  
network report to the sender whether or not the message has been received.  
• Send Read Report: when this option is enabled, your phone sends a  
notification back to the recipient indicating that your message has been received.  
• Reject Anonymous: allows you to automatically reject messages with a  
category of anonymous.  
• Reject Advertisement: allows you to automatically reject messages with a  
category of advertisement.  
Multimedia Message Profiles: you can select a connection profile which is then  
used for sending and receiving Multimedia messages.  
MMS Profiles: allows you to select an option for sending a multimedia message.  
Choose from the following options:  
MEdia Net wap1.x  
MEdia Net wap2.x  
AT&T MMS  
AT&T IMS  
Profile Settings (accessed by pressing the Options softkey)  
Set Name  
Access Name  
Auth Type  
User ID  
Password  
Protocol  
Home URL  
Proxy address  
Port  
Linger Time (Sec.)  
Advanced Settings (Static IP, Static DNS, and Traffic Class)  
75  
Messaging Settings  
Auto Resize Image: you can specify that the received image by be resized up/  
down:  
No Resize  
100 KB  
300 KB  
600 KB  
Creation: you can specify that the users creating new media content be given the  
following options:  
Warning  
Free  
Restricted  
Default Style: you can specify the default visual parameters used by this type of  
message:  
Font Color  
Font Style  
Background Color  
Page Duration  
Voice Mail Message  
The following options are available:  
Voicemail: you can specify the default phone number used for access of phone’s  
remote voicemail:  
• Name: allows you to create a new descriptive name for this access number.  
• Center Address: allows you edit the existing number and create a new number  
for use when accessing the remote voicemail.  
Push Message  
The following options are available:  
Receiving Option: you can specify whether to turn push message reception On or  
Off.  
Service Loading: you can specify whether to load this service:  
Always  
Prompt  
Never  
Messaging 76  
Memory Status  
You can check the amount of the memory being used and the memory remaining for  
Multimedia, Text, Push, and Configuration Messages. The display shows the total  
space including the used and free space. You can also view how much space is  
currently occupied by each message box.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Messaging, and press the Select soft key or the  
key.  
key.  
3. Highlight Memory Status and press the Select soft key or the  
4. Use your Up, Down, Left or Right Navigation keys to select a particular  
folder for review.  
5. Press the Select soft key or the  
key. The contents of that folder are  
key.  
then listed.  
6. When you have finished, press the  
77  
 
Sound Settings  
Section 8: Changing Your Settings  
Topics Covered  
This section explains the sound and phone settings for your phone. It includes  
display settings, security settings, and extra settings associated with your phone.  
Sound Settings  
You can customize various sound settings.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
3. Select Profiles and press the Select soft key or the  
key.  
key. Use the Down  
Navigation key to scroll through the following list of available options:  
Normal Profile  
To access the available options for this calling profile, press the Options soft key.  
Highlight Edit and press the Select soft key or the key. Use the Left and Right  
Navigation keys to move between the various tabs. This menu allows you to alter the  
audio settings for the following categories:  
Changing Your Settings 78  
           
Incoming Call: allows you to edit the properties for audio alert used for incoming  
phone calls.  
• Call Alert Type: allows you to select the way in which the selected ringtone is  
played to notify you of an incoming call. Options include:  
-
Melody: the phone sounds the selected melody.  
-
Increasing Melody: the phone sounds the selected melody at continually  
increasing volume until the incoming call is answered.  
-
-
-
Vibration then Melody: the phone vibrates then plays the melody.  
Vibration & Melody: the phone vibrates and also plays the melody.  
Vibration & Increasing Melody: the phone vibrates and also plays the  
melody at increasing volume levels during each consecutive ring.  
• Voice Call Ringtone: allows you to select a ringtone from your My Stuff  
(Phone) folder which contains not only the default phone ringtones, but also any  
new ringtones which have been downloaded from the Internet.  
• Ringtone Volume: allows you to select the volume at which the ringtone is  
played. This range is from 1 - 7.  
• Auto Reply: allows you to setup an automatic text reply for missed calls.  
New Messages: allows you to edit the properties for audio alert used for newly  
received messages.  
• Message Alert Type: allows you to select the way in which the selected  
ringtone is played to notify you of an incoming message. Options include the use  
of either the Mute, Melody, Vibration, or a combination of the latter two.  
-
-
-
-
Melody: the phone sounds the selected melody.  
Vibration: the phone vibrates.  
Vibration & Melody: the phone vibrates and also plays the melody.  
Mute: the alert is muted.  
• Message Alert Tone: allows you to select either an Effect Tone (Beep, Pure,  
Clean, or Fun) or a personalized My Alert Tone from your My Stuff (Phone) folder  
which contains not only the default phone tones, but also any new tones which  
have been downloaded from the Internet.  
• Message Alert Repetition: allows you to select whether the message alert  
tone is used to notify you of a new message only once or periodically until you  
open the message.  
• Alert Tone Volume: allows you to select the volume at which the tone is  
played. This range is from 1 - 7.  
Phone Sounds: allows you to edit the properties for phone’s audio properties while  
it is set to this mode  
• Keypad Tones: allows you to select what tone is played when the keypad keys  
are pressed. Options include the Beep, Clean and Mute.  
• Power On Type: allows you to select what tone is played when the phone is  
powered On. Options include a Melody, Vibration, Vibration & Melody, or Mute.  
79  
                       
Sound Settings  
• Power Off Type: allows you to select what tone is played when the phone is  
powerd Off. Options include a Melody, Vibration, Vibration & Melody, or Mute.  
• Folder Open/Close Tone: allows you to select what tone is played when a  
folder is Opened (accessed) or Closed. Options include a Melody, 1 - 3, or Mute.  
• Volume, Phone Sounds: allows you to select the volume at which the keypad  
tone is played. This range is from 0 - 7.  
Note: To save any changes made to this profile’s parameters, press the Options soft key. Highlight Save and  
press the Select soft key.  
Other Available Profiles  
The phone can be set to additional audio profiles which are available via the Profiles  
menu. Although each profiles has similarities, they have each been preset to use  
different audio parameters for incoming phone call alerts, message alerts, and  
The Silent profile causes the speaker to be muted and the phone only  
vibrates and displays information on its front panel LCD. This icon is  
accompanied on screen by the Vibrate icon.  
Note: The Silent profile can also be activated by pressing and holding the  
key. An on screen message  
notifies you that the new Silent profile is now active. To deactivate this profile, press and hold the  
key again.  
The Driving profile keeps the speaker is active. In this case, the speaker  
is active and will launch the currently selected ringtone or melody  
when the associated notification is activated. This icon is accompanied  
on screen by the Audio icon.  
The Meeting profile causes both the speaker audio and vibration  
features to be disabled and only the front panel LCD displays  
information. This icon is accompanied on screen by the Audio icon.  
The Outdoor profile keeps the speaker active, the volume settings are  
raised to their highest levels, any currently active ringtones or melodies  
are activated, and the phone’s vibrate feature is activated. This icon is  
accompanied on screen by the Vibrate/Audio icon.  
The Airplane profile allows you to use many of your phone’s features,  
such as Games, Music, Notepad, Voice Memos, etc., but you cannot  
send or receive any calls or access online information. This icon is  
accompanied on screen by the Mute icon.  
Changing Your Settings 80  
                 
Display Settings  
In this menu, you can change various settings for the display or backlight.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Display Settings and press the Select soft key or the  
key.  
The following options are available. Use the Down Navigation key to scroll  
to and set options:  
Main Display  
Wallpaper: allows you to select from either the preloaded wallpapers found in the  
My Stuff (Phone) folder or photographs which have been either taken with the  
camera or downloaded from the Internet. The None option leaves the wallpaper  
blank. Press the Up or Down Navigation keys to make your selection. Press the Set soft  
key or the  
key to make your selection.  
Greeting Message: allows you to enter the text which appears on the screen then the  
phone powers on.  
Menu Style: allows you to select the whether the phone’s menus are presented in either  
a Grid Menu style of List Menu style. Press the Up or Down Navigation keys to make your  
selection. Press the Select soft key or the  
key to make your selection.  
Pop Up List Menu: allows you to select the whether the to activate pop up menus.  
Press the Up or Down Navigation keys to make your selection. Choose from On or Off.  
Press the Save soft key or the  
key to make your selection.  
Idle Screen Setting: allows you to select what is displayed when the phone is in Idle  
mode. Press the Left or Right Navigation keys to make your selection. Choose from Text  
Clock, Clock 1, Clock 2, or Calendar. Press the Save soft key or the  
selection.  
key to make your  
Dialing Display: allows you to select the properties of those items which are part of the  
display such as Font and Color:  
Font Type: allows you to select what font is used. Press the Left or Right Navigation  
keys to make your selection. Choose from Normal, Quill Pen, or Sticky Note. Press the  
Save soft key or the  
key to make your selection.  
Font Size: allows you to select a size for the selected font. Press the Left or Right  
Navigation keys to make your selection. Choose from Large, Medium, or Small. Press  
the Save soft key or the  
key to make your selection.  
Font Color: allows you to select a color for the selected font. Press the Left or Right  
Navigation keys to make your selection. Choose from Monochrome, Rainbow,  
Gradation, or Basic. Press the Save soft key or the  
key to make your selection.  
81  
                         
Time & Date  
Background Color: allows you to select a color for the background screen. Press  
the Left or Right Navigation keys to make your selection. Choose from the available  
colors. Press the Save soft key or the  
key to make your selection.  
Light Settings  
Brightness: allows you to adjust the display brightness for the LCD to see it better  
in different lighting conditions. Press the Left or Right Navigation keys to adjust the  
brightness. Press the Save soft key or the  
key to make your selection.  
Backlight Time: allows you to select the amount of time for the backlight to  
remain on and the length of time for the actual dimming to occur. Press the Up or  
Down Navigation keys to make your selection. For On choose from either 15  
Seconds, 30 Seconds, or 1 Minute. For Dim choose from either Off, 5 Seconds, 15  
Seconds, 30 Seconds, or 1 Minute. Press the Save soft key or the  
key to make  
your selection. Choose On or Off for the Front LCD Indicator.  
Keypad Light: allows you to determine when to use the keypad light. Press the Up  
or Down Navigation keys to make your selection. Choose from either Use at Any  
Time, or Use at Custom Time. Press the Save soft key or the  
key to make  
your selection.  
Time & Date  
This menu allows you to change the current time and date displayed. You can also  
find out what time it is in another part of the world.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Time & Date and press the Select soft key or the  
key. The  
following options are available. Use the Down Navigation key to scroll to  
and set options:  
Time Zone Updating: allows you to select whether the time zone information is  
updated: Automatic (which greys-out all other options), Manual Only, or Prompt  
first.  
Home Zone: allows you to enter the assign your current time zone based upon  
Greenwich Mean Time. Major cities in each zone are displayed upon selection. Use  
the Left or Right Navigation key to select a new zone. Press the OK soft key or the  
key to save the new selection.  
Tip: You can also choose to activate Daylight Savings Time within the Home Zone menu option.  
Changing Your Settings 82  
                   
Time: allows you to enter the current time using your keypad. Press the Right  
Navigation key to select AM or PM. Press the Save soft key or the  
the new selection.  
key to save  
Date: allows you to enter the current date using your keypad. Press the Left or  
Right Navigation key to navigate between the month, day, or year fields. Press the  
Save soft key or the  
key to save the new selection.  
Time Format: allows you to change the time format to 12 hours or 24 hours. Use  
the Left or Right Navigation key to select between the two options. Press the Save  
soft key to save the new selection.  
Date Format: allows you to change the date format. Press the  
key to activate  
the option. Use the Up or Down Navigation key to select between the different  
options. Press the OK soft key to change the format. Press the Save soft key to  
save the new selection.  
Note: Automatic updates of time and date do not change the time you have set for alarm settings or  
calendar memos.  
Phone Settings  
To customize the settings of your phone use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Phone Settings and press the Select soft key or the  
key.  
The following options are available. Use the Down Navigation key to scroll  
to and set options:  
Language: allows you to select a display language. You can set the Text Language  
or the Input Mode.  
• Screen Text: allows you to select the phone text. Use the Up or Down Navigation  
key to highlight your selection. Press the OK softkey or the key to make your selection.  
Press the Save soft key to save your new selection. Options include:  
-
Automatic: the language is automatically selected according to the language  
of the SIM card used.  
-
-
-
English: the selected phone language is changed to English.  
Français: the selected phone language is changed to French.  
Español: the selected phone language is changed to Spanish.  
• Input T9: sets the language used when entering text into the phone. Use the Up or  
Down Navigation key to highlight your selection. Press the OK softkey or the key  
to make your selection. Press the Save soft key to save your new selection. Options  
include:  
-
English: the selected phone language is changed to English.  
83  
                   
Call Settings  
-
-
Français: the selected phone language is changed to French.  
Español: the selected phone language is changed to Spanish.  
Shortcuts: allows you to change the applications assigned to your Navigation keys.  
Press a particular Navigation key and press the Options softkey.  
Highlight Change and press the . Use the Up or Down Navigation key to  
select a new application to assign to the previously pressed key.  
Press the Save soft key or the  
assigned Navigation key.  
key to save the new application to the  
Own Number: allows you to enter a name and number into your phone for easy  
referral.  
Call Settings  
This menu allows you to change the actions taken by the phone when dialing and  
receiving calls. These settings extend to not only voice calls but also Data calls as  
well.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Call Settings and press the Select soft key or the  
key. The  
following options are available. Use the Down Navigation key to scroll to  
and set options:  
All Calls  
This allows you to configure some common high level parameters used by the phone  
for most types of calls.  
Show My Number: allows you to select how your ID is handled when an outgoing  
call is initiated. Use the Up or Down Navigation key to highlight your selection. Press  
the  
key to make your selection. Press the Save soft key to save your new  
selection. Options include:  
• By Network: you are identified to the other party using the default network  
information.  
• Send: your phone number and name are sent to the other party.  
• Hide: your identifying information is hidden from the other party.  
Auto Reject: allows you to enable a phone feature which allows you to automatically  
reject calls from a list of contacts. Use the Left or Right Navigation key to toggle the  
activation of this feature. Select Auto Reject List and press the  
key to access the  
list of rejected numbers. Press the key to select an entry from the list of press the  
Create soft key to create a new phone entry. Press the OK softkey or the key to make  
your selection. Press the Save soft key to save your new selection.  
Changing Your Settings 84  
                   
Answering Mode: allows you to select how your phone answers incoming calls. Use  
the Up or Down Navigation key to highlight your selection. Press the key to make  
your selection. Press the Save soft key to save your new selection. Options include:  
• Normal: allows you to answer an incoming call by pressing either the Accept  
soft key or the  
key.  
• Any key: allows you to answer an incoming call by pressing any key on your  
phone.  
• Active Flip: allows you to answer an incoming call by just opening the phone.  
Show Caller ID: allows you to select whether your phone displays the caller ID  
information for the incoming call. Use the Left or Right Navigation key to toggle the  
activation of this feature. Press the  
key to make your selection. Press the Save  
soft key to save your new selection. Options include:  
• Activation On/Off: allows you to set whether your phone displays the caller ID  
for the incoming call.  
• With Front Display: allows you to also display the caller ID on the front LCD.  
Call Status Tones: allows you to activate an alert tone for one of three available  
status categories. Use the Up or Down Navigation key to highlight your selection.  
Press the  
key to make your selection. Press the Save soft key to save your new  
selection. Options include:  
• Call Connect Tone: allows you to activate an alert tone when the a connection  
has been made.  
• Minute Minder: allows you to activate an alert tone which sounds every  
minute the call is active.  
• Call End Tone: allows you to activate an alert tone when the a connection has  
been terminated.  
Alerts On Call: allows you to activate an alert tone for new messages being received  
during an active call. Use the Up or Down Navigation key to highlight your selection.  
Press the  
key to make your selection. Press the Save soft key to save your new  
selection. Options include:  
• Off/On: allows you to toggle the activation of this feature. Selecting Off prevents  
a new message alert from sounding while you are on an active call. Selecting On  
allows an alert tone to sound if you receive a new message during an active call.  
85  
               
Call Settings  
Voice Call  
This allows you to configure those phone parameters associated to voice calls.  
Call Forwarding: enables incoming calls to be rerouted to a number that you specify.  
Use the Up or Down Navigation key to highlight your selection. Press the  
key to  
make your selection. Press the Select soft key to save your new selection. Options  
include:  
• Always: allows you to forward Voice Calls. Press the Select soft key and either  
enter the phone number or press the Options soft key to select a number from  
your Address Book. Once you have selected a number, press the Options soft  
key and select to either Activate/Deactivate this feature.  
• If Busy: allows you to forward Voice Calls to a designated number instead of  
your voice mail number if you are on another phone call. Press the Select soft  
key and either enter the phone number or press the Options soft key to select a  
number from your Address Book. Once you have selected a number, press the  
Options soft key and select to either Activate/Deactivate this feature.  
• If No Reply: allows you to forward Voice Calls to a designated number instead  
of your voicemail number when there is no answer on your phone. Press the  
Select soft key and either enter the phone number or press the Options soft  
key to select a number from your Address Book. Once you have selected a  
number, press the Options soft key and select to either Activate/Deactivate  
this feature.  
• If Out Of Reach: allows you to forward Voice Calls to a designated number  
instead of your voicemail number when you are not in an area covered by your  
service provider or when your phone is switched off. Press the Select soft key  
and either enter the phone number or press the Options soft key to select a  
number from your Address Book. Once you have selected a number, press the  
Options soft key and select to either Activate/Deactivate this feature.  
• Cancel All: allows you to cancel all Call Forwarding features. Press the Select  
soft key to activate this feature.  
Call Waiting: informs you when someone is trying to reach you during another call.  
Press the  
key to make your selection. Press the Select soft key to save your new  
selection. Options include:  
• Activate: allows you to activate this feature for all Voice Calls. Press the  
Options soft key to select this option.  
• Deactivate: allows you to deactivate this feature for all Voice Calls. Press the  
Options soft key to select this option.  
• Check Status: allows you to check the status of this feature for all Voice Calls.  
Press the Options soft key to select this option.  
Auto Redial: allows to you automatically redial the last number if the call was either  
cut off or you were unable to connect. Press the  
key to make your selection.  
Press the Save soft key to save your new selection. Options include:  
Changing Your Settings 86  
                     
• Off: keeps the phone from automatically redialing the last number if the call was  
disconnected or the call was cut off.  
• On: causes the phone to automatically redial the last number if the call was  
disconnected or the call was cut off.  
Data Call  
This allows you to configure those phone parameters associated to data calls.  
Call Forwarding: enables incoming data calls to be rerouted to a number that you  
specify. Use the Up or Down Navigation key to highlight your selection. Press the  
key to make your selection. Press the Select soft key to save your new selection.  
Options include:  
• Always: allows you to forward Data Calls. Press the Select soft key and either  
enter the phone number or press the Options soft key to select a number from  
your Address Book. Once you have selected a number, press the Options soft  
key and select to either Activate/Deactivate this feature.  
• If Busy: allows you to forward Data Calls to a designated number instead of  
your voice mail number if you are on another phone call. Press the Select soft  
key and either enter the phone number or press the Options soft key to select a  
number from your Address Book. Once you have selected a number, press the  
Options soft key and select to either Activate/Deactivate this feature.  
• If No Reply: allows you to forward and Data Calls to a designated number  
instead of your voicemail number when there is no answer on your phone. Press  
the Select soft key and either enter the phone number or press the Options  
soft key to select a number from your Address Book. Once you have selected a  
number, press the Options soft key and select to either Activate/Deactivate  
this feature.  
• If Out Of Reach: allows you to forward Data Calls to a designated number  
instead of your voicemail number when you are not in an area covered by your  
service provider or when your phone is switched off. Press the Select soft key  
and either enter the phone number or press the Options soft key to select a  
number from your Address Book. Once you have selected a number, press the  
Options soft key and select to either Activate/Deactivate this feature.  
• Cancel All: allows you to cancel all Call Forwarding features. Press the Select  
soft key to activate this feature.  
87  
               
Connectivity  
Call Waiting: informs you when someone is trying to reach you during another call.  
Press the  
key to make your selection. Press the Select soft key to save your new  
selection. Options include:  
• Activate: allows you to activate this feature for all Data Calls. Press the  
Options soft key to select this option.  
• Deactivate: allows you to deactivate this feature for all Data Calls. Press the  
Options soft key to select this option.  
• Check Status: allows you to check the status of this feature for all Data Calls.  
Press the Options soft key to select this option.  
Connectivity  
The Connectivity Settings allow you to manage the settings associated with the  
connection types available to your phone, including, Bluetooth, Network, Wireless  
connectivity, and USB.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Connectivity and press the Select soft key or the  
key. Use the  
Down Navigation key to scroll to and set these options.  
Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a physical  
connection. Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within a range of one another, you can  
exchange information between them, even if they are located in different rooms.  
The Bluetooth wireless technology settings menu provides the ability to view and  
change the device name, show the visibility, and set the security for the device.  
Activation of Bluetooth  
When the Bluetooth is turned on, you can use the Bluetooth features available. When  
the Bluetooth is turned off, you cannot send or receive information via Bluetooth. To  
save battery life or in situations where Bluetooth use is prohibited, you can turn off  
the Bluetooth wireless technology headset.  
Changing Your Settings 88  
                 
My Devices  
This menu provides a list of Bluetooth wireless technology devices discovered by  
your handset.  
1. From the Bluetooth menu items, highlight My Devices and press the  
Select soft key or the  
key.  
2. To search for the Bluetooth device(s), highlight Search For New Devices  
and press the Select soft key or the  
key.  
Connecting to a Bluetooth Device  
From the Device list,  
1. Highlight the device and press the Select soft key or the  
key.  
2. Enter the PIN for the device.  
If connecting to a Bluetooth wireless device consult your Bluetooth device  
user manual for your assigned PIN.  
If connecting to another handset, enter the same user-defined PIN on both  
handsets.  
Note: The first time you try to pair with a handset, you and the owner of the other handset must enter the  
same PIN. Once the handsets are paired, you will not need to use the PIN again.  
3. Press the OK soft key or the  
key.  
4. If you are unable to pair with the device a popup appears in the display.  
Press the Yes soft key to retry.  
Configuring your Phone’s Bluetooth Visibility  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its  
phone name and status. This can be useful if you are attempting to connect  
additional Bluetooth devices. Allowing your phone to promote its visibility can pose a  
security risk and incite unauthorized connection. This feature should be paired with a  
Bluetooth security option.  
1. Highlight the option (On/Off) and press the Select soft key or the  
key.  
Configuring your Phone’s Bluetooth Name  
89  
       
Connectivity  
When your phone’s Bluetooth visibility is turned On, it identifies itself using the name  
entered into this text field. This name can be altered by selecting the pre-existing  
text and selecting a new text string in its place. This feature should be paired with a  
Bluetooth security option.  
1. Press the  
key to erase the previous name.  
2. Use the phone’s keypads to enter a new name. The default input entry  
method is Abc, where the initial character is Uppercase and each  
consecutive character in that same word is left as lowercase text.  
3. Press the Save soft key or the  
key to save the new name.  
Configuring your Phone’s Bluetooth Security  
When the Bluetooth Visibility is turned on, your phone is wirelessly transmitting its  
phone name and status. This transmission can pose a security risk and incite  
unauthorized connection to your phone. It is recommended that you active your  
phone’s Bluetooth security.  
1. Highlight the option (On/Off) and press the Select soft key or the  
Bluetooth Services  
key.  
Actually, the Bluetooth specification is a protocol that describes how the short-range  
wireless technology works, whereas individual profiles describe the services  
supported by individual devices. Profiles reduce the chance that different devices  
will not work together.  
Your phone supports the following profile services:  
Headset: enables outgoing and incoming calls.  
Handsfree: the remote carkit enables outgoing and incoming calls.  
Bluetooth Stereo Headset: enables outgoing and incoming calls via a headset  
equipped with stereo headsets.  
Serial Port: data communication can be established via a Serial Port connection.  
Dial Up: The phone is configured as a dial up modem for access to the Internet.  
Basic printing: The phone is configured to use bluetooth technology to enable basic  
printing from the phone. This is useful to print received text message or contact  
information.  
File Transfer: The phone is configured to transfer data wirelessly to a target device.  
Object Push: The phone is configured to wirelessly transfer information about  
Pushes.  
Changing Your Settings 90  
   
Configuring your Phone’s Connections  
Your phone is wirelessly connecting to the Internet via a built in WAP browser.  
Connection can be made via either one of three available WAP browsers: MEdia Net  
wap1.x, MEdia Net wap2.x, AT&T MMS (MultiMedia Server), AT&T IMS. Use this  
menu to create and customize the profiles containing the settings for connecting  
your phone to the network. You need these settings to use the web browser or send  
MMS messages or e-mails. Although the active connection can be changed by the  
user, it is recommended that this choice be made with the assistance of either the  
retailer or customer service representative.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
3. Select Connectivity. Highlight Connections and press the Select soft key  
or the key. Use the Up or Down Navigation key to highlight one of  
key.  
these options:  
• MEdia Net wap1.x  
• MEdia Net wap2.x  
• AT&T MMS  
• AT&T IMS  
4. Press the Options soft key.  
Note: The MEdia Net WAPs are pre-configured and can not be altered on this screen. The AT&T MMS  
connection option can be edited, renamed, or deleted on this screen. Your phone is set up by default  
for connecting to the network. If you change the settings without first checking with your service  
provider, the web browser, MMS, and e-mail features may not work properly.  
5. To create a new connection, press the Options soft key, select New, and  
press the Select soft key or the  
key.  
- or -  
6. To edit the existing AT&T MMS, highlight this entry, press the Options soft  
key, select Edit, and press the Select soft key or the  
key.  
7. Select the parameter you want to edit:  
• Set Name: enter a profile name.  
• Access Name: edit the access point name.  
• Auth Type: select the type of authentication used for this WAP connection:  
None, Normal, or Secure.  
• User ID: enter the User ID required to connect to the network.  
• Password: enter the user password required to connect to the network.  
91  
   
Configuring your Phone’s USB Connection  
• Protocol: set the connection protocol used by the WAP browser: WAP, HTTP, or  
Other.  
• Home URL: enter the URL address of the page to be used as your homepage.  
• Gateway address: (wap1.x only) enter the gateway address of the proxy server.  
• Proxy address: (wap2.x and AT&T MMS) set the proxy server address and port.  
• Linger Time (Sec.): set a time period (in seconds) after which the network is  
disconnected if there has been no new data traffic in that time.  
• Advanced Settings: allows you to configure some of the IP-specific  
information: Static IP, Static DNS, Server information, and Traffic Class.  
-
-
-
Static IP: specify if you want to manually enter an IP address. If you want the IP  
address to be automatically assigned by the server, remove the check mark.  
Local phone IP: enter the IP address obtained from the network operator, if you  
checked the Static IP option.  
Static DNS: specify if you want to manually enter the Domain Name Server  
(DNS) address. If you want the address to be automatically assigned by the  
server, remove the check mark.  
-
-
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.  
Traffic class: select the traffic class.  
Note: The WAP settings may vary depending on the service provider.  
Configuring your Phone’s USB Connection  
Your phone can connect to a PC via the USB cable (sold separately). The phone can  
be configured to open launch a default application when an active USB connection is  
detected.  
1. Use the USB adapter cable to connect the handset to the target PC. When  
an active connection has been established, a USB icon (  
the phone.  
) appears on  
2. When the Idle screen displays, press the Menu soft key.  
3. Select Settings and press the Select soft key or the  
key.  
Select Connectivity. Highlight Select USB Mode and press the Select soft  
key or the  
key. Use the Up or Down Navigation key to highlight one of  
these options:  
• Media Player: sets the Media Player to launch as the default application when  
a USB connection is detected. This is the default application.  
• PC Studio: sets PC Studio to launch as the default application when a USB  
connection is detected.  
• Ask on Connection: requires the phone to present a “Select USB Mode”  
pop-up which requires you to assign a default USB application.  
Changing Your Settings 92  
   
4. With the application highlighted, press the Save soft key or the  
Software Update  
key.  
The Software Update feature enables you to use your phone to connect to the  
network and upload any new phone software directly to your phone.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Software Update and press the Select soft key or the  
key.  
key to continue the update process and follow the on screen  
4. Press the  
instructions.  
Application Settings  
The Application Settings feature allows you to configure the functional parameters  
for most of the on board applications. These applications are described in more  
detail within other sections of this manual.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Application Settings and press the Select soft key or the  
key.  
4. Select the type of application which you want to change.  
• Messaging Settings (page 74)  
• Browser Settings (page 152)  
• Camera Settings (page 126)  
• Camcorder Settings (page 130)  
• Media Player Settings (page 120)  
• Cellular Video Settings (page 118)  
• Record Audio Settings (page 134)  
• Calendar Settings (page 137)  
• Address Book Settings (page 54)  
• Video Share Settings (page 98)  
5. Press the Select soft key or the  
key.  
93  
       
Application Settings  
Security  
The Security feature enables you to restrict the use of your phone by the others and  
to restrict the types of calls.  
Various codes and passwords are used to protect the features of your phone.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
key.  
3. Select Security and press the Select soft key or the  
The following options are available. Use the Up or Down Navigation key to  
scroll to and set options.  
Phone Lock  
When the Phone lock feature is enabled, the phone is locked and you must enter the  
4- to 8-digit phone password each time the phone is switched on. To change the  
password has been entered, you can use the phone until you switch it off. The  
following options are available:  
Off: you are not asked to enter the phone password when you switch on the phone.  
On: you are required to enter the phone password when you switch on the phone.  
SIM Lock  
When the SIM Lock feature is enabled, your phone only works with the current SIM.  
You must enter the lock code to unlock the SIM so you can use a different SIM card.  
Once you have entered the lock code, you are asked to confirm your password.  
Reenter your password and press the OK soft key.  
PIN Check  
When the PIN Check feature is enabled, you must enter your PIN each time you  
switch on the phone. Consequently, any person who does not have your PIN cannot  
use your phone without your approval.  
Note: Before disabling the PIN Check feature, you must enter your PIN.  
The following options are available:  
Off the phone connects directly to the network when you switch it on.  
On: you must enter the PIN each time the phone is switched on.  
Changing Your Settings 94  
         
Lock Applications  
Using this menu, you can lock the following categories:  
Lock All  
Messaging  
My Stuff  
Recent Calls  
Address Book  
Calendar  
Note  
IM  
Tasks  
Once you have locked the contents, you must enter the phone’s password to access  
the associated menus.  
FDN Mode  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
your outgoing calls to a limited set of phone numbers.  
The following options are available:  
Off: you can call any number.  
On: you can only call phone numbers stored in Phone book. You must enter your  
PIN2. The following options are available:  
Full length entries or wild cards can be entered in to the FDN list.  
A full length number with a specific contact name can be entered into the FDN  
list.  
Wildcard entries allow a range of numbers to be dialed with a single entry: ex.  
555 – All dialed numbers that begin with 555 will be allowed. Numbers that do  
not match the conditions in the FDN list will be restricted. Note: Entering an  
asterisk (*) is not required for wild card entries.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
Change Phone Password  
The Change Phone Password feature allows you to change your current phone  
password to a new one. You must enter the current password before you can specify  
a new one.  
Once you have entered a new password, you are asked to confirm it by entering it  
again.  
95  
         
Reset Settings  
Change PIN Code  
This feature allows you to change your current PIN, provided that the PIN Check  
feature is enabled. You must enter the current PIN before you can specify a new one.  
Once you have entered a new PIN, you are asked to confirm it by entering it again.  
Change PIN2 Code  
The Change PIN2 feature allows you to change your current PIN2 to a new one. You  
must enter the current PIN2 before you can specify a new one. Once you have  
entered a new PIN2, you are asked to confirm it by entering it again.  
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu does not display.  
Reset Settings  
You can easily reset your phone to its default settings. To reset your phone:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Reset Settings and press the Select soft key or the  
key.  
4. The following options are available. Use the Up or Down Navigation key to  
scroll to and set options. Choose from the following:  
All  
Phone Settings  
Display Settings  
Profiles  
Alarms  
5. Press the  
key to make your selection and press the OK soft key.  
6. Enter your phone password, if prompted.  
7. At the “Reset Settings?” prompt, press the Yes soft key to reset, or the  
No soft key to cancel. Once your phone has been reset to its default  
settings for those selected options, it will restart itself in order to  
incorporate the new settings.  
Changing Your Settings 96  
       
Memory Settings  
You can easily check the amount of memory being used for storing data, such as  
messages, media, calendar data, or contacts entries. You can also delete any  
selected information from your phone:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select Settings and press the Select soft key or the  
key.  
3. Select Memory Settings and press the Select soft key or the  
key.  
4. The following options are available. Use the Up or Down Navigation key to  
scroll to and set options. Choose from the following:  
• Clear Memory  
• Memory Status  
Clearing Memory  
Note: To completely remove any personal information stored on your device, see "Precautions for Transfer  
1. Highlight Clear Memory and press the Select soft key or the  
key.  
2. Highlight All and press the  
key to select all available categories.  
You can remove the check mark by pressing the  
key again. Selecting  
All places a checkmark adjacent to every entry in the list.  
- or -  
3. Highlight a specific category and press the  
key to select it.  
4. Press the OK soft key.  
5. Enter your password (if applicable) and press the Confirm soft key.  
Depending on your phone’s security settings, you may be asked to enter  
your password a second time.  
6. At the Clear all memories? confirm screen, press the Yes soft key to  
continue, or the No soft key to cancel.  
7. When you are finished, press the  
key to return to Idle mode.  
97  
     
Video Share Settings  
Checking the Memory Status  
1. Highlight Memory Status and press the Select soft key or the  
key.  
2. Highlight the storage category and the Select soft key or the  
key. you  
can choose from one of the following categories:  
• Shared Memory  
• Messaging  
• My Stuff  
• Calendar  
Task  
• Note  
• Address Book  
3. To view the contents of a category’s memory, use the Up or Down  
navigation key to select the entry and press the Select soft key.  
4. To delete all the entries in this category, highlight All and press the  
key  
to select the categories.  
5. Press the Delete soft key.  
6. At the Delete? confirm screen, press the Yes soft key to continue, or  
the No soft key to cancel.  
7. Enter your password (if applicable) and press the Confirm soft key.  
Depending on your phone’s security settings, you may be asked to enter  
your password a second time.  
When you are finished, press the  
key to return to Idle mode.  
Video Share Settings  
To enable the Alerts, Auto Record, and Service options for Video Share, use the  
following steps.  
1. From the Idle screen, press the  
Menu key. Use the Navigation keys to  
key.  
access the Settings menu, press  
2. Press the Down Navigation key to the Application Settings menu, and  
press  
3. Press the Down Navigation key to the Video Share Settings menu and  
press . To access the following options, press the Select soft key.  
.
Alerts: allows you to turn On or Off the Video Share Alerts which displays a  
message and a tone.  
Auto Record: allows you to turn On or Off the Auto Record which records the  
Video Share call.  
Changing Your Settings 98  
     
Service: allows you to turn On or Off the Video Share service. (This option default  
is On.)  
Press the  
key to save the option.  
99  
Shopping for Audio  
Section 9: AT&T Mall  
Topics Covered  
The AT&T Mall topics covered in this section are shopping for Tones, Games,  
Graphics, Multimedia, and Accessing the MEdia Home site.  
Note: Prior to purchasing downloadable tones, graphics, games, or other applications, it is necessary to  
setup an e-wallet account so that with every purchase, your account can easily be debited.  
Shopping for Audio  
The Shop Tones menu option allows you to shop for audio tones using the built-in  
browser. You can download, record new, and save audio to either your Audio or  
Music folder. To access this menu option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the Shop Tones menu option to launch the built-in browser and  
select a file to download. Follow the on-screen options. The downloaded  
files can be stored into either the Audio or Music folders found within the  
My Stuff (Phone) location. Music Tone categories include:  
Featured Artists  
Answer Tones  
Search for a specific audio file by name  
4. Select an audio file and press the  
key.  
5. When you are ready to purchase the audio file, press the Buy Now button  
to charge your e-wallet account and complete the transaction.  
AT&T Mall 100  
     
Shopping for Games  
The Shop Games menu option allows you to shop for games using the built-in  
browser. You can download new games to your Games folder. To access this menu  
option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the Shop Games menu option to launch the built-in browser and  
select a game to download. Follow the on-screen options. The downloaded  
files can be stored in the Games folder found within the My Stuff (Phone)  
location. Categories include:  
New Arrivals  
Retro  
3D Games  
Game Clubs  
Search for a specific game by name  
4. Select a game entry and press the  
key.  
5. When you are ready to purchase the game, press the Buy Now button to  
charge your e-wallet account and complete the transaction.  
Shopping for Graphics  
The Shop Graphics menu option allows you to shop for graphic images using the  
built-in browser. You can download new images to your Graphics folder. To access  
this menu option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the Shop Graphics menu option to launch the built-in browser  
and select an image to download. Follow the on-screen options. The  
downloaded files can be stored in the Graphics folder found within the My  
Stuff (Phone) location. These images can be used as wallpapers or  
included into multimedia messages. Categories include:  
TV  
Express Yourself  
Latin  
Search for a specific image by name  
4. Select an image entry and press the  
key.  
When you are ready to purchase the image, press the Buy Now button to charge  
your e-wallet account and complete the transaction.  
101  
       
Shopping for Multimedia Content  
Shopping for Multimedia Content  
The Shop Multimedia menu option allows you to shop for multimedia files (videos)  
using the built-in browser. You can download new videos to your Videos folder. To  
access this menu option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the Shop Multimedia menu option to launch the built-in browser  
and select a video file to download. Follow the on-screen options. The  
downloaded files can be stored in the Video folder found within the My  
Stuff (Phone) location. These files can be included into multimedia  
messages or sent as attachment files to text messages.  
4. Select an video file entry and press the  
key.  
5. When you are ready to purchase the file, press the Buy Now button to  
charge your e-wallet account and complete the transaction.  
Shopping for Applications  
The Shop Applications menu option allows you to shop for application files using  
the built-in browser. You can download the new applications to your Applications  
folder. To access this menu option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the Shop Applications menu option to launch the built-in  
browser and select an application to download. Follow the on-screen  
options. The downloaded apps. can be stored in the Applications folder  
found within the My Stuff (Phone) location. These files can be included into  
multimedia messages or sent as attachment files to text messages.  
4. Select an video file entry and press the  
key.  
5. When you are ready to purchase the application, press the Buy Now button  
to charge your e-wallet account and complete the transaction.  
AT&T Mall 102  
       
Accessing the MEdia Net Home  
The MEdia Net menu option allows you to quickly access your MEdia Net homepage  
using the built-in browser. This page gives you quick access to information such as  
local weather, sports scores, horoscope information and quick links to the previously  
mentioned shopping sites. To access this menu option, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall and press the Select soft key or the  
key.  
3. Highlight the MEdia Net Home menu option to launch the built-in browser  
and launch this AT&T homepage.  
103  
 
Accessing AT&T Music  
Section 10: AT&T Music  
Topics Covered  
AT&T Music is a music service which provides you access to Streaming Music,  
Music Videos, Music store, Music communities, music applications, and a unique  
MusicID application.  
Accessing AT&T Music  
1. When the Idle screen displays, press the  
key.  
2. Use the Down Navigation key to scroll through the list of available options.  
Note: Audio files less than 300 KB are treated as ringtones, whereas audio files which are greater than  
300 KB are stored in the Music Folder. A user can not set an MP3 file as a ringtone if it is larger than  
300 KB.  
Adding Music to your Handset  
Music files (such as ringtones) can be added to your handset by using one or more of  
the following methods:  
Download music and ringtones over the Cingular network directly to your device by  
using the shopping for music feature.  
From your existing digital media collection thru Windows Media Player®.  
AT&T Music 104  
       
From our music store partners through the applicable music client.  
Note: If the Bluetooth feature is currently active on your handset, USB communication will not be available.  
To transfer files to your handset, turn off the Bluetooth functionality (Settings > Connectivity >  
Bluetooth).  
Shopping for Music  
AT&T Music can be used to shop for ringtones, Answer Tones™ and songs from  
some of your favorite music stores.  
1. When the Idle screen displays, press the  
2. Highlight Shop Music and press the Select soft key or the  
3. Use the Up or Down Navigation key to highlight your music store of choice  
or Ringtones and press the Select soft key or the key.  
key.  
key.  
4. From the Categories listing, highlight the desired entry and press the  
key. Press the Back soft key to return to the previous page.  
To exit the browser at any time, simply press the  
key.  
Transferring Music from the Digital Music Stores  
www.cingular.com.  
1. Using your computer, open your preferred WMDRM PC music management  
client (i.e., www.napster.com).  
2. Download the selected song to your library.  
3. Insert the microSD card into the handset. For more information see  
4. Use the USB adapter cable to connect the handset to the target PC. When  
an active connection has been established, a USB icon (  
the phone.  
) appears on  
5. Once the USB connection has been established, the handset displays  
"Connected" and the computer screen then shows your device. If the  
detection occurs, skip to step 11.  
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog  
window on the PC screen, please follow steps 6 - 10.  
6. When the Idle screen displays, press the Menu soft key.  
105  
       
Adding Music to your Handset  
7. Select Settings and press the Select soft key or the  
8. Select Connectivity and press the Select soft key or the  
9. Use the Up or Down Navigation key to highlight Select USB Mode and  
press the Select soft key or the key.  
10. Use the Up or Down Navigation key to highlight Media Player and press  
the Select soft key or the key.  
key.  
key.  
11. Highlight the song you wish to download to the handset.  
12. Using your right mouse button, click on the highlighted song and select  
Transfer Track(s) to Portable Device from the drop-down menu. This  
step begins the download process.  
Transferring Music using Windows Media Player  
A USB cable, microSD card, and a current version of the Windows Media Player are  
required for this procedure.  
1. Open Windows Media Player on your computer (version 10.0 or higher).  
2. Use the USB adapter cable (sold separately) to connect the handset to the  
target PC. When an active connection has been established, a USB icon  
(
) appears on the phone.  
3. Once the USB connection has been established, the handset displays  
"Connected" and the computer screen then shows your device.  
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog  
window on the PC screen, please follow steps 6 - 10 from the previous see "Transferring Music from  
4. From within the Windows Media Player application, click on the Sync tab.  
Previously downloaded songs are then listed on the left side of the  
application.  
5. Choose the destination location for the media files. The SGH-A717 -  
Phone and SGH-A717 Card entries both appear in a drop-down list on the  
right side of the screen. This selection determines whether the audio files  
will be synchronized with the Phone or with the inserted memory card.  
Note: If there are no items present in the playlist, click the Edit Playlist button and begin adding the music  
files from among the various media categories.  
6. Click on the checkmark boxes (to the left of the song entry) to select the  
song you want to synchronize to your handset.  
AT&T Music 106  
   
7. Click the Start Sync button at the upper right corner of the application to  
download the selected songs to your handset. A “synchronization in  
progress” message appears on the application. Do not unplug the handset  
during this process. Once complete, a Music folder appears below the  
device entry on the right of the Sync tab.  
8. It is now safe to unplug the USB connector from the handset.  
Using the Music Player  
The Music Player is a component of the built in Media Player which is an application  
that can play music files. The music player supports files with extensions AAC,  
AAC+, eAAC+, MP3, WMA, 3GP, MPEG, MP4, and M4A. Launching the Media Player  
allows you to navigate within your Media Player - Music folders and select playback  
material.  
1. When the Idle screen displays, press the  
key.  
2. Highlight Music Player and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight a folder from the list:  
• Last played: displays the songs that were recently played.  
• All: provides a list of all uploaded music files which have been purchased or  
downloaded from your computer. This can include ringtones, answer tones, and  
music.  
• Recently played: provides a list of the most recently played music files.  
• Most Played: provides a list of the most played music files.  
• Artists: provides a list of the artists that you have music stored.  
• Genres: provides a list of genres for the songs you have stored.  
• Albums: provides a list of albums the Billboard Hot 100 Collections, Business as  
Usual, Greatest Hits, and Unknown categories.  
• Composers: provides a list of the composers you have stored on your phone.  
• Playlists: provides a list of your music playlists. These playlists provide access  
to streaming music streams.  
4. Press the Options soft key. Highlight Open and press the Select soft key or  
the  
Playing Music Transferred to the Handset  
1. When the Idle screen displays, press the key.  
2. Highlight Music Player and press the Select soft key or the  
3. Select All Music and press the key to open the folder.  
4. Use the Up or Down Navigation key to select the song you want to listen to  
and press the Select soft key or the key.  
key to begin playing the song.  
key.  
107  
                       
Multitasking  
Playing Music through a Stereo Bluetooth Device  
Your device supports the Stereo Bluetooth profile (A2DP) that when synched to a  
stereo Bluetooth headset will play back music in stereo.  
1. Pair your handset to a stereo Bluetooth device. For specific pairing  
procedures, refer to "Connectivity" on page 88.  
2. Press the  
3. Highlight Music Player and press the Select soft key or the  
4. Select All Music and press the key to open the folder.  
key to display the main AT&T Music menu.  
key.  
5. Use the Up or Down Navigation key to select a song and press the  
key  
to play the song within the Media Player.  
6. During playback, press the Options soft key. Highlight Play via >  
Bluetooth stereo headset and press the  
search for compatible stereo bluetooth devices.  
7. From the list of compatible devices, select the previously paired bluetooth  
key. The headset will then  
headset and press the  
headset.  
key to begin listening to your song through the  
Multitasking  
The Multitasking option allows you to play the Music Player in the background  
while performing other tasks on your phone. The music will pause when an incoming  
call is accepted, and the music will resume when the call is ended. Music will also  
continue to play when you receive a Text Message, Multimedia Message, or an  
Instant Message.  
Note: Playing music and pausing the music player uses the same amount of battery.  
1. From the Idle screen, press the  
the key.  
key to start the Music Player. Press  
2. Press the Options soft key and highlight Player Settings. Press the  
key. Use the Up or Down Navigation key to highlight the Minimize Player  
option. (The default setting is On).  
3. Use the Left or Right Navigation key to select On and press the Save soft  
key.  
Using the Media Player while Multitasking  
After the Music Player has been enabled, you can begin to listen to music while  
performing other phone functions.  
AT&T Music 108  
         
1. From the Idle screen, press the  
key to start the Music Player. Press  
the  
key. The following menu options are displayed.  
Last played  
All  
Recently played  
Most played  
Artists  
Genres  
Albums  
Composers  
Playlists  
2. Highlight your selection and press the  
key. Use the Up or Down  
Navigation key to make your song selection from your list, and press the  
key. The song will begin playing displaying the song title, artist name  
and any additional information related to the song.  
To go to the previous song press the Rewind  
Pause (Center key) to go to the next song press the Fast forward  
(Right Navigation key) icons are displayed above the soft key functions.  
(Left Navigation key)  
3. Press the Back soft key to show the list of songs. The  
icon displays  
next to the song currently playing.  
4. To stop the song press the  
.
Important!: When you are finished using the Multitasking function, you must press the  
key to stop  
the function to prevent the battery from losing its’ charge. Pausing the player will continue to  
use the battery.  
Using Playlists  
Playlists are used to assign songs to a list of preferred media which can then be  
grouped into a list for later playback. These Playlists can be created via either the  
handset’s Media Player options menu or from within a 3rd party music application  
(such as Windows Media Player) and then downloaded to the handset.  
Note: The Music Player does not necessarily support all features of a particular file format nor all the  
variations of those formats. The Music Player includes support for Windows Media Digital rights  
Management (WMDRM) which allows you to play some purchased or subscription content. Copyright  
protections may prevent some images, music (including ringtones) and other content from being  
copied, modified, transferred or forwarded.  
Creating a Playlist  
1. Press the  
key to display the main AT&T Music menu.  
109  
   
Using Playlists  
2. Highlight Music Player and press the Select soft key or the  
key.  
3. Select Playlists and press the Options soft key.  
4. Highlight Create Playlist and enter a unique name for the song list using  
the keypad.  
5. Press the Save soft key to store this playlist as a separate file within the  
main Media Player directory. At this point the playlist is empty and must be  
populated with a list of songs found on your handset.  
Adding songs to a Playlist  
1. Press the  
2. Highlight Music Player and press the Select soft key or the  
3. Highlight Playlists and press Options soft key. Highlight Open and press  
the key. Highlight the previously created playlist and press the Options  
key to display the main AT&T Music menu.  
key.  
soft key.  
4. Highlight Open and press the  
key. By default, this list is blank.  
key.  
key. The Playlist screen then lists all of  
5. Press the Options soft key. Highlight Add and press the  
6. Highlight Files and press the  
the available music files on the handset.  
7. To select the music files for addition to the current playlist, highlight the  
entry and select it by pressing the  
key. You can choose to add either  
individual songs, multiple songs, or All available songs.  
• All: Selects all of the available listed songs and marks them for addition to the  
playlist.  
8. Press the Add soft key and wait for the song to be added to the current  
playlist.  
Remove songs from a Playlist  
1. Press the  
2. Highlight Music Player and press the Select soft key or the  
3. Highlight Playlists and press Options soft key. Highlight Open and press  
the key. Highlight the previously created playlist and press the Options  
key to display the main AT&T Music menu.  
key.  
soft key.  
Note: The number of songs currently in that playlist are displayed below the playlist name.  
4. Highlight Open and press the  
5. Use the Up or Down Navigation key to select an audio file.  
AT&T Music 110  
key.  
   
6. Press the Options soft key. Highlight Remove and press the  
key.  
7. Highlight Selected and press the key. The other option is to select All  
which would remove every song from the current playlist.  
8. At the “Remove?” prompt, press either the Yes soft key to confirm deletion  
or No to cancel.  
Importing a Playlist from a 3rd Party Application  
1. Open Windows Media Player on your computer (version 10.0 or higher).  
2. Use the USB adapter cable to connect the handset to the target PC. When  
an active connection has been established, a USB icon (  
the phone.  
) appears on  
3. Once the USB connection has been established, the handset displays  
"Connected" and the computer screen then shows the A717 device.  
Note: If the target computer does not detect the newly connected handset or provide an MTP Player dialog  
window on the PC screen, please follow steps 6 - 10 from the previous see "Transferring Music from  
4. From within the Windows Media Player application, click on the Library  
tab.  
5. From the left side of the Library tab, click on All Music. The right side of  
the page is then populated with all of the songs which the player has  
previously found.  
6. Right click on the song entry and select, Add to.. > Additional Playlists.  
7. From the Add to Playlist dialog, click the New button and type in a unique  
playlist name.  
8. Click OK when you are done entering the new playlist name. The new  
Windows Media playlist is then displayed within the My Playlist section of  
the Library tab (left side).  
9. Drag and drop the newly created playlist from the My Playlist section to  
the A717-Phone or the A717-Card entry listed just above it.  
The A717-Phone and A717-Card entries both appear on the left side of  
the screen.  
Note: If there are no items present in the playlist, click the Edit Playlist button and begin adding the music  
files from among the various media categories.  
10. It is now safe to unplug the USB connector from the handset.  
111  
 
Using MusicID  
Using MusicID  
MusicID is an application which uses the onboard microphone to analyze a song  
sample and then compare it to a remote database of songs. Once the application  
completes the analysis of the song sample, it then provides you with the name of the  
song, artist and album art as well as opportunities to buy related content.  
1. When the Idle screen displays, press the  
key.  
2. Highlight MusicID and press the Select soft key or the  
key. You are  
then presented with a list of ID options:  
• ID song!: begins the analysis of the song being sampled through the handset’s  
microphone.  
• manage IDs: provides a list of recently identified song and allows you to obtain  
information about the song, delete the song, or send the Music ID as a link to  
another phone number.  
• help me out: provides you with on screen descriptions of several key MusicID  
features.  
• exit: allows you to exit the application and return to the main AT&T Music menu.  
To exit the application at any time, simply press the  
key.  
Using ID song!  
1. Highlight ID song! and press the  
key.  
2. Place the handset’s microphone up to the source of the song, which can be  
from either a radio, stereo, or headset. The handset then begins to analyze  
the audio signal. If a song match is found, the screen displays the Artist  
Name, Track Title, and Album cover art.  
3. To purchase the song (with ringtone and wallpaper if available), highlight  
get:, and press the  
key.  
4. To share the song ID with another user, highlight Share ID press the  
key. Enter the recipient’s phone number and press the ShareID! soft key.  
Within a short time they will receive a message containing a Music ID link  
to the song.  
5. If the song can not be found, the handset displays a “Sorry, No Match Try  
Again!” message. Press the newID! soft key and try analyzing the song  
again.  
To exit the application at any time, simply press the  
Using Manage ID’s  
key.  
1. Highlight Manage ID’s and press the  
key. The screen displays a list of  
AT&T Music 112  
     
the most recent successful song IDs which were made.  
2. Highlight a song and press the Options soft key.  
3. Highlight one of the following options and press the  
key.  
• ID Info: displays the Artist Name, Track Title, and Album cover art of the  
identified song.  
• Delete ID: deletes the selected song from the list of identified songs.  
• New ID!: begins the song analysis process again. Hold the microphone to the  
song source and wait for analysis.  
To exit the application at any time, simply press the  
Getting Help with Music ID  
1. Highlight help me out and press the  
key.  
key to select a topic. The screen  
displays a list of helpful topics related to the musicID application. These  
topics cover:  
• IDing a Song: provides information about the analysis process.  
• Recommendations and More!: describes the process following the  
successful identification of a song. You can choose to purchase the song and  
wallpaper (if available) or send the musicID as a link to another phone number.  
• Subscription: provides details about the general usability and monthly term  
information.  
• About Music ID: provides information about the Music ID software version.  
Exiting from the Music ID Application  
There are two ways to exit from the musicID application:  
1. Highlight exit and press the  
2. Exit the application at any time by simply pressing the  
Streaming Music  
key to select a topic.  
key.  
This service allows you to stream over 40 channels of commercial free music  
through your handset.  
Note: Since this product uses a large amount of data in its stream process, you should note that you are  
responsible for all data charges incurred. It is recommended that you subscribe to a MEdia Max data  
bundle so that you are not charged for data overages.  
Note: MobiRadio does not work with Bluetooth. Periodically, the application will ask the customer to  
confirm they are still listening to the stream.  
1. When the Idle screen displays, press the  
key.  
2. Highlight Streaming Music and press the Select soft key or the  
key.  
113  
       
Music Video  
3. Use the Down Navigation key to scroll through the following list of  
available Menu options:  
• Back: if you are already streaming a music station, this option allows you to  
return to the main guide.  
• Guide: launches the main MobiRadio page which lists the currently available  
radio stations. Once the subscription has been purchased, this list increases  
from those available only during the trial period, to more than 40 music stations.  
• Help: provides some on screen information about some of the main MobiRadio  
features and functions.  
• About: provides information about the MobiRadio software version.  
• Exit: allows you to exit from the Streaming Music application and return to the  
main AT&T Music menu.  
Streaming a Music Channel  
1. Press the OK soft key to accept the terms of the trial period. You have only  
a few days to use the service before the trial period expires. If at any time  
you wish to purchase a subscription to the MobiRadio service, press the  
Buy soft key and follow the on screen prompts.  
2. Use the Up or Down Navigation key to highlight a radio station category  
from the guide list and press the  
3. Use the Up or Down Navigation key to highlight a specific radio channel  
and press the key to begin the stream to your phone.  
Music Video  
key.  
The Music Videos homepage is a component of the Cellular Video service. This page  
provides you with links to some of the most popular multimedia content.  
1. When the Idle screen displays, press the  
key.  
2. Highlight Music Video and press the Select soft key or the  
key. You  
are then taken to your CV Music homepage. This homepage provides you  
with several sections of accessible content:  
• Music: allows you to choose from some recently uploaded video clips from the  
Music Choice channel, which can include news, cuts, and ringtone reports.  
• Music Channels: provides some general content categories from which to  
begin searching for media: Cingular Sounds Live, Music Choice Premium, Music  
Videos, MTV, VH1, CMT, and Hip Hop Official.  
• Entertainment: exits from the Music Videos section of the homepage and  
launches an entertainment page which provides further streaming multimedia  
content.  
• Cellular Video: exists from the Music Video application and launches the  
Cingular Video homepage.  
AT&T Music 114  
       
• MEdia Net: exists from the Music Video application and launches the MEdia Net  
homepage.  
• Help: provides basic on-line assistance which answers most of the common  
issues users come across while using this feature.  
3. Highlight the desired media clip or select from one of the available  
categories and press the  
key.  
Music Video Options  
The options for the Music Video page are identical to those options provided for  
within the Cellular Video homepage. For more information, refer to "Cellular Video  
1. When the Idle screen displays, press the  
key.  
2. Highlight Music Video and press the Select soft key or the  
key.  
3. From the main Music Video homepage, press the Options soft key.  
Viewing a Video Clip  
1. Use the Up or Down Navigation key to highlight the video clip and press  
the Select soft key or the  
key.  
2. After the stream has been buffered into memory, you can choose to either  
Pause or play the content. Pressing the  
key toggles the Play and  
Pause functionality.  
The Buzz  
This service allows you to navigate through Top 20 chart songs (in a variety of  
categories). Other features of this service include streaming entertainment news  
about your favorite music artists, access to an artists main page (containing  
discographies, ringtones, concert dates,etc..), concert information, games, and  
setup options for your own personal billboard notifications.  
1. When the Idle screen displays, press the  
key.  
2. Highlight The Buzz and press the Select soft key or the  
key.  
3. Press the Trial soft key to accept the terms of the trial period. You have  
only a few days to use the service before the trial period expires. If at any  
time you wish to purchase a subscription to this service, press the Buy soft  
key and follow the on screen prompts.  
4. Enter an area code, phone number (without dashes), and Zip code into the  
appropriate fields on the Customize screen. Use the Up or Down  
Navigation key to switch between fields.  
5. Press the Confirm soft key to accept and save your information.  
115  
       
Music Community  
6. Once the phone number has been successfully registered, press the OK  
soft key to continue onto the main Billboard mobile menu where you are  
given a list of categories to choose from:  
• CHARTS: provides you with a top 20 list of popular Ringtones, and tunes such  
as R&B/Hip Hop, Rock, Pop, Latin, Country, and Rap.  
• NEWS & REVIEWS: provides you with links to some of the latest news about  
your favorite artists.  
• ARTISTS: features a personalized artist web page for an available artist which  
includes a bio, discography info, ringtones, tour dates, etc..  
• CONCERTS: allows you to search for a concert by using either the artist name,  
venue, type, or city/state/zip information.  
• GAMES: allows you to use your keypad to play an entertainment-based  
guessing game by entering in names, dates, and places.  
• MY BILLBOARD: allows you to refine your Billboardmobile experience by  
configuring your text message preferences, personal settings, and alerts.  
7. Exit the application at any time by simply pressing the  
key.  
Music Community  
This Community is a place where you can find a listing of various fan sites that  
provide sound clips, wallpapers, bios, discographies, and other information about an  
artist.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight AT&T Music and press the Select soft key or the  
key.  
key.  
3. Highlight Community and press the Select soft key or the  
4. Use the Up or Down Navigation key to select a fan site and press the  
key. These pages can contain the following information:  
• Wallpapers: provides you with color graphic files which can be used as a  
wallpaper on your handset. Highlight an entry and press the  
key.  
• Photos: allows you to view some artist-specific photos. Use the Next and Back  
buttons to navigate through these pages.  
• Bio: provides a biographical description of the artist/band.  
• Artist Info: provides more specific group member information.  
• Discography: provides a description of the artist’s albums and their  
corresponding release dates.  
Tour Dates: provides a listing of the artist’s current tour dates.  
To exit the application at any time, simply press the  
key.  
AT&T Music 116  
   
Music Apps  
The Music Apps option access the internet to provide Music tools for your handset.  
Services provided on this site are, Music ID, MobiRadio, Billboard Mobile Channel,  
MobiTV: Live TV, and MobiTV en Espanol.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight AT&T Music and press the Select soft key or the  
key.  
key.  
3. Highlight Music Apps and press the Select soft key or the  
4. Use the Up or Down Navigation key to select a fan site and press the  
key to make your selection.  
117  
   
Section 11: Cellular Video  
Topics Covered  
Your phone is equipped with a WAP (Wireless Application Protocol) browser which  
allows you to access Internet and then upload media files directly to your phone.  
These media files are displayed using the built-in Media Player. Cellular Video (CV) is  
a media service which allows you to not only navigate to your favorite web sites but  
stream media content (Weather, News/Sports highlights, etc..) directly to your  
phone.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key. You  
are then taken to your default Cellular Video homepage.  
This homepage provides you with several sections of accessible content:  
• My Favorites: allows you to choose from some recently uploaded video clips  
from among the following media providers: CNN, ESPN, HBO Mobile Preview, or  
Access Hollywood.  
• Video Categories: provides some general content categories from which to  
begin searching for media: TV to Go, Entertainment, Sports, News & Weather,  
HBO Mobile, and Premium Channel.  
• Customize Cellular Video: allows you to access the Cellular Video Settings  
menu where you can configure most of the settings associated with Cellular  
Video.  
• Parental Control: provides you with settings which can be configured to restrict  
certain media content from being displayed on the phone.  
• MEdia Net: exits from the Cellular Video application and launches the MEdia Net  
homepage.  
• Help: provides basic on-line assistance which answers most of the common  
issues users come across while using this feature.  
Cellular Video 118  
     
3. Highlight the desired media clip or select from one of the available  
categories and press the Select soft key or the key.  
Cellular Video Options  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. From the main Cellular Video homepage, press the Options soft key to use  
one of the following options:  
• Go to: returns you to the main Cellular Video homepage.  
• Go: lets you navigate Forward (next sequenced web page) or Backward (to the  
previously visited web page) through pages in your browsing history.  
• Reload: reloads the current page with updated information.  
• Desktop View: changes the display mode of the browser.  
• Page Size: change the page size of the displayed web page (Large, Normal, or  
Small).  
• Go to Homepage: takes you back at any time to the homepage of the Wireless  
Web service provider.  
• Add to Favorites: bookmarks the current page and marks it as a favorite site.  
• View Favorites: accesses and displays the bookmarks assigned as favorite  
web pages.  
• Send URL: send the URL of the current page via either a message or to another  
party via a Bluetooth device.  
• Enter URL: allows you to manually enter the URL address of a WAP site. After  
entering an address, press the OK soft key to go there directly.  
• Copy URL via Message: send the URL of the current page to another party as  
a message.  
• Save: saves either the image of the current web page or the current page itself.  
• Saved Pages: access the list of web pages you have saved.  
• History: displays the list of web pages you have recently accessed.  
• Advanced: allows you to change the following settings for the browser.  
-
-
-
Clear Cache: deletes the information stored in the cache. The cache stores the  
most recently accessed pages.  
Empty Cookies: delete cookies. Cookies are pieces of personal information sent  
to a web server while navigating the web.  
Cookie Options: sets whether or not cookies are stored on your phone. If you  
select Prompt, the phone will ask you to save the cookies on every page  
requiring cookies.  
-
-
-
Preferences: changes the settings for the web browser to suit your preference.  
Certificates: accesses certificate information from your phone.  
Page Details: displays the properties for the currently active web page.  
119  
     
Media Clip Options  
-
-
Browser Settings: selects a connection profile to be used when connecting to  
the Internet.  
About Browser: displays the access version and copyright information about  
the browser.  
Media Clip Options  
With the media currently active on the phone (either playing or paused), press the  
Options softkey to open a list of the following streaming media options.  
Tip: Within the clips listed in the My Favorites section of your main CV homepage, highlight the description  
and then press the  
key to begin the stream.  
Pause/Resume  
This feature allows you to toggle the state of the current video between being  
Paused or Resuming playback.  
Stop  
The feature stops the current media, exits the media player and returns you to the  
main Cellular Video homepage.  
Jump to track time  
This feature pauses the current media content and displays a “Jump to track time”  
pop-up which allows you to enter an Hour, Minute, and Second value which  
corresponds to the media’s timeline. If, as an example, the content is three minutes  
long, entering a value of: 00:01:30, would cause the Media Player to begin replaying  
the content from its half-way point.  
1. Use your keypad to enter a value for the Hour, Minute, and Seconds.  
2. Press the Jump soft key to cause the Media Player to resume playback at  
that value on the clip’s timeline  
- or -  
3. Press the Cancel soft key to go back to your media clip and resume  
playback from its previous location.  
Properties  
Displays a Media Player window which gives file specific information such as title,  
and Duration.  
Cellular Video 120  
       
Settings  
This feature pauses the content and navigates you to the Player Settings menu  
where you can configure the Media Player’s Volume setting.  
1. Use the Up or Down Navigation key to increase/decrease the current  
volume setting for the player while in Portrait mode. Use your Left or Right  
Navigation key to increase/decrease the current volume setting for the  
player while in Landscape mode.  
2. Press the Save soft key to save your changes  
- or -  
3. Press the Back soft key to resume your media playback without saving  
your changes.  
Cellular Video Settings  
This feature allows you to configure the current server profile being used by the  
Landscape  
This features rotates the streaming media clip to appear in a landscape orientation.  
The default orientation is a portrait orientation.  
This functionality is also enabled from the main Landscape soft key.  
Using the Video Categories  
This grouping of media categories provides access to an additional listing of  
streaming media. Where the previous Favorites list of media stream can be user  
edited and updated, this list of categories is defined by Cellular Video’s homepage  
and can not be changed.  
Viewing a Video Clip  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
3. Use the Up or Down Navigation key to highlight the video clip from within  
the Favorites section and press the Select soft key or the key.  
4. After the stream has been buffered into memory, you can choose to either  
key.  
Pause or play the content. Pressing the  
key toggles the Play and  
Pause functionality.  
121  
     
Customizing Cellular Video  
Customizing Cellular Video  
Updating the Favorites List  
The list of media providers which appear in the Favorites section of the Cellular  
Video homepage can be edited and changed by the user.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight the Edit button from the  
upper-right of the homepage (adjacent to the My Favorites title) and press  
the Select soft key or the  
4. From the Customize Cellular Video - Options listing, highlight Edit My  
Favorites and press the Select soft key or the key.  
key.  
5. Navigate to the Add to Favorites section of the page and highlight one the  
additional streaming media channels which are not currently in your  
Favorites list (ex: Cartoon Network).  
6. Press the Options soft key. Highlight Add to Favorites and press the  
Select soft key or the  
key.  
Adding a Video Alert  
When new media is available for upload to your phone (such as breaking news), you  
can set your phone to notify you of the new available content.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight the Customize Cellular  
Video button from the bottom of the homepage and press the Select soft  
key or the  
4. From the Customize Cellular Video - Options listing, highlight My Video  
Alerts and press the Select soft key or the key.  
key.  
5. Navigate to the Add to My Alerts section of the page and highlight one the  
available services (ex: Breaking News).  
6. Press the Options soft key. Highlight Add to Favorites and press the  
Select soft key or the  
key.  
Cellular Video 122  
       
My Purchases  
The Cellular Video homepage can be used to shop for streaming multimedia content.  
The My Purchases section can help keep track of your purchase history and view  
any new resale products.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight the Customize Cellular  
Video button from the bottom of the homepage and press the Select soft  
key or the  
4. From the Customize Cellular Video - Options listing, highlight My  
Purchases and press the Select soft key or the key.  
5. Highlight Purchase History and press the Select soft key or the  
key.  
key.  
This provides you with an on screen listing of your “to date” purchase  
history for media content.  
6. Highlight My Account and press the Select soft key or the  
key. This  
provides you with an on screen description of your account details.  
Parental Controls  
Your phone can be configured to block both purchased and streamed media content.  
Before filtering, you must first establish a pin/password and a contact e-mail  
address. Once those have been established, you can the two available filter options:  
Content Filters and Purchase Blocker.  
Content Filtering let you restrict access to inappropriate content both on and  
outside of MEdia Net.  
Purchase Blocking lets you restrict the ability to buy ringtones, downloads,  
games, etc.., from this phone.  
Setting up Parental Control  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight the Customize Cellular  
Video button from the bottom of the homepage and press the Select soft  
key or the  
4. From the Customize Cellular Video - Options listing, highlight Parental  
Controls and press the Select soft key or the key.  
key.  
123  
         
Parental Controls  
5. Highlight the OK button and press the  
key to access the MEdia Net  
parental setup fields.  
6. From the Parental Control Setup screen, use your keypad to enter  
information into the following fields: PIN Code, Re-enter PIN code,  
contact email address.  
7. Use you Navigation keys to highlight the Save button and press the  
key. Allow a few minutes for your information to be received and accepted  
by MEdia Net. You can then use this information to activate the parental  
filters.  
Configuring the Filters  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight Cellular Video and press the Select soft key or the  
key.  
3. Use the Up or Down Navigation key to highlight the Customize Cellular  
Video button from the bottom of the homepage and press the Select soft  
key or the  
key.  
4. Highlight the OK button and press the  
key.  
5. When prompted, enter the PIN and e-mail address which was registered  
with MEdia Net in the previous section.  
6. Highlight Content Filters and press the Select soft key or the  
key.  
7. Highlight the On button and press the Select soft key or the  
key to  
toggle the On/Off state.  
8. Highlight Purchase Blocker and press the Select soft key or the  
key.  
9. Highlight the On button and press the Select soft key or the  
key to  
toggle the On/Off state.  
10. Press the Back soft key or the  
key. This activates.  
Cellular Video 124  
S e c tio n 1 2 : U sin g th e A p p lic atio n s  
Topics Covered  
The on-board applications (such as camera, camcorder, calendar, and alarms) can  
be supplemented with additional applications which can be purchased via the AT&T  
Mall.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
key.  
125  
   
Shop Applications  
Shop Applications  
1. Press the Select soft key or the  
key.  
on downloading applications.  
Using the Camera  
Taking Photos  
Note: When taking a photo in direct sunlight or in bright conditions, shadows may appear on the photo.  
1. In Idle mode, press the Options (right) soft key  
to open the My Menu  
screen.  
2. From the on screen list choose Camera and press the Select soft key or  
the key.  
3. Adjust the image by aiming the camera at the subject.  
4. Press the key to take the photo.  
5. Once the photo has been taken, press the  
key to attach the photo  
directly to a message.  
Note: Your camera produces photos in JPEG format. The number that appears in the upper-right of the  
screen indicates the current number of pictures have been saved to the selected media and an  
approximate number of total pictures which can be taken at the current image size.  
6. Or before taking the photo, press the Options soft key to access camera  
options.  
Camera Options  
Take Photo: allows you to take a photo.  
Rotate: allows you to rotate the orientation of the photo.  
Shooting Mode: allows you to take a photo in various modes. Once you change  
the mode, the corresponding indicator appears at the top right of the display.  
• Single Shot: allows you to take a single photo and view it before returning to the  
shooting mode. Press the Select soft key to set the camera to either:  
-
-
Take & Review  
Take & Return  
• Multi-Shot: allows you to take a succession of consecutive photos. Press the  
Select soft key to set the number of shots to either:  
-
-
-
6 Shots  
9 Shots  
15 Shots  
Using the Applications 126  
           
• Mosaic Style: allows you to take up to four photos and then have them grouped  
together into a single final photo. Press the Select soft key to set the size of  
these mosaic photos to either:  
-
-
2x2  
3x3  
Effects: allows you to choose a custom color tone for your photo. Choose from the  
following Effects Mode.  
• No Effects: automatically adjust the picture for the best quality available.  
• Black & White: removes all color and display the picture as black and white.  
• Sepia: adds a sepia tint to the picture. This is the common orange tint that was  
popular in early photography.  
• Negative: changes the image to a negative image display.  
Frames: allows you to choose a custom frame border for your. Choose from one of  
the 20 available frames.  
Timer: allows you to set a time delay before the camera takes the photo.  
Off  
3 seconds  
5 seconds  
10 seconds  
Record Video: allows you to switch from taking a photo to shooting a video clip  
using the camera’s camcorder setting.  
Go to Graphics: allows you to access the list of taken photos. Press the Options soft  
key to view the following options for these graphics:  
• View: allows you to view the photo.  
• Send: allows you to attach the graphic to a message, send it to a Bluetooth  
device, or to ImageStation®.  
• Set as: allows you to set the currently selected graphic to be displayed on the  
Main Display or assigned to a Caller ID.  
• Move: allows you to move either a Selected or Multiple graphics to one of the  
My Stuff (Phone) folders.  
• Copy: allows you to make a copy of the Selected or Multiple graphics and then  
send it to one of the My Stuff (Phone) folders.  
• Delete: allows you to delete either Selected or Multiple graphics.  
• Rename: allows you to rename either Selected or Multiple graphics.  
• Create Folder: allows you to create a new folder and then populate it with either  
Selected or Multiple graphics from the list.  
• Sort by: allows you to sort the list of graphics by either: Date, Type, Name, or  
Size.  
• Bluetooth Visibility: allows you to either Enable or Disable graphics visibility to  
Bluetooth devices.  
127  
         
Using the Camera  
• Print via: allows you to make a selected graphic printable by either USB or  
Bluetooth printer.  
• Lock: allows you to lock the photo.  
• Properties: allows you to view the properties of a photo.  
Camera Settings: allows you to customize your camera settings. Choose the  
following options:  
• Size: allows you to set the image size. The icon for the selected image size  
appears on the capture screen.  
• Quality: allows you to select the picture quality setting. Choose Super Fine,  
Fine, Normal, Low, or Economy.  
• Display: allows you to choose between Actual Screen, Full Screen &  
Guideline, Full Screen & Indicator, or Full Screen.  
• Scene program: allows you to set the lighting for the photos. Choose Normal  
or Night-time landscape.  
• Shutter Sound: allows you to select a shutter tone sound when taking a photo.  
• Multi Shot Speed: allows you to set the speed between each photo taken using  
a multi shot session. Choose Low, Normal, or High.  
• White Balance: allows you to set the white balance for the camera. Choose  
Auto, Daylight, Cloudy, Incandescent, or Fluorescent.  
• Default Storage: allows you to set a default storage location for the photos  
taken on your phone. Choose Phone or Memory Card.  
• Default Name: allows you to set a default prefix name for the photos taken on  
your phone.  
Camera Shortcuts: allows you to see the shortcut keys associated when using the  
camera.  
Video Share: allows you to make a Video Share call. (This option will only display if  
you have the Video Share service.)  
7. Press the Back soft key to return to the picture viewer.  
8. You can use the keypad to quickly change the camera options using the  
camera shortcut keys.  
Camera Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and  
Volume key in capture mode. The following options are available.  
takes photo.  
adjust the image brightness (Left/Right).  
Using the Applications 128  
     
zooms in or out (Up/Down). Not allowed if the picture size is  
set to its maximum value.  
switches the handset between camera and camcorder mode.  
changes the image size.  
changes the image quality.  
changes the camera shooting mode.  
changes the effects of the photo.  
within the camera mode, this loads frame option #20 on screen.  
sets a time delay (Off, 3, 5, or 10 seconds).  
switches to the Photo Album.  
adds a quadrant overlay to help you position your shot.  
Camera Options after a Photo is Taken  
After you have taken a photo, you can use various options by pressing the Options  
soft key. Highlight an option and press the Select soft key or the  
key. The  
following options are available:  
Send: allows you to attach the graphic to a Message, send it to a ImageStation®, or  
to a Bluetooth device.  
Delete: allows you to delete the photo you have taken.  
ViewFinder: allows you exit from the picture options menu and return to the  
camera’s viewfinder.  
Set as: allows you to set the photo as your wallpaper on your Main Display or set the  
photo as a Caller ID for a contact.  
Edit Photo: allows you to edit the photo by bringing up a set of options consisting of:  
Save as allows you to change the name of the image.  
Effects (Black and White, Sepia, Negative, Milky, Lighting, Crayon Pastel, Oil  
Paint, Blur, Despeckle, or Sharpen)  
Partial effects (Partial Blur or Redeye Repair)  
Adjust (Brightness, Contrast, or Color)  
129  
Using the Camcorder  
Transform (Resize, Rotate, or Flip)  
Crop allows you to move the Navigation key to select the portion of the image you  
want to crop.  
Insert (Frames, Cliparts, Emoticon or Text)  
Set as (a wallpaper for Main Display and assign it to a Caller ID)  
Send (via Multimedia Message, via Bluetooth to ImageStation)  
Print via (USB or Bluetooth)  
Rename: allows you to rename the photo.  
Go to Graphics: allows you to view photos you have previously taken.  
Lock: allows you to lock the photo to prevent deletion.  
Bluetooth Visibility: allows you to make the photo visible to Bluetooth devices.  
Properties: allows you to view the properties for this photo.  
Accessing the Photos Folder  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight My Stuff, and press the Select soft key or the  
3. Highlight Graphics and press the Select soft key or the  
4. Use the Up or Down Navigation key to select a photo.  
key.  
key.  
5. To open the photo, press the  
Using the Camcorder  
Shooting Video  
key.  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you have provide  
your subject with sufficient light by having the light source behind you.  
1. In Idle mode, press the Options (right) soft key  
to open the My Menu  
screen.  
2. From the on screen list choose Camera and press the Select soft key or  
the key.  
3. Press the  
4. Adjust the image by aiming the camera at the subject.  
key to switch to the camcorder.  
5. Press the  
key to begin shooting video.  
6. Press the  
key to stop the recording and save the video file to your  
My Stuff folder.  
- or -  
Before shooting, press the Options soft key to access camcorder options.  
Using the Applications 130  
       
7. Once the file has been saved, press the  
key to play back your video for  
review.  
Camcorder Options  
1. Press the  
key to access the camcorder options.  
Record Video: allows you to begin recording a video segment.  
• Rotate: allows you to rotate the orientation of the photo.  
• Effects: allows you to choose a custom color tone for your video. Choose from  
the following Effects Mode.  
-
-
-
No Effects: automatically adjust the picture for the best quality available.  
Black & White: removes all color and display the picture as black and white.  
Sepia: adds a sepia tint to the picture. This is the common orange tint that was  
popular in early photography.  
-
Negative: changes the image to a negative image display.  
• Timer: allows you to set a time delay before the camcorder begins to shoot  
video.  
-
-
-
-
Off  
3 seconds  
5 seconds  
10 seconds  
Take Photo: allows you to switch from shooting a video clip to taking a photo.  
• Go to Video: allows you to access the list of videos stored within the Video  
folder. Press the Options soft key to view the following options for these clips:  
-
Play: allows you to play the video clip.  
-
Send: allows you to attach the multimedia file to a message or send it to a  
Bluetooth device.  
-
-
Move: allows you to move either a Selected or Multiple videos to one of the  
My Stuff (Phone) folders.  
Copy: allows you to make a copy of the Selected or Multiple videos and then  
send it to one of the My Stuff (Phone) folders.  
-
-
-
Delete: allows you to delete either Selected or Multiple multimedia videos.  
Rename: allows you to rename either Selected or Multiple videos.  
Create Folder: allows you to create a new folder and then populate it with either  
Selected or Multiple multimedia files from the list.  
-
-
Sort by: allows you to sort the list of files by either: Date, Type, Name, or Size.  
Bluetooth Visibility: allows you to make either a Selected or Multiple videos  
visible to Bluetooth devices.  
-
-
Lock: allows you to lock the video file to prevent deletion.  
Properties: allows you to view the properties of a video file.  
131  
           
Using the Camcorder  
• Camcorder Settings: allows you to customize your camcorder settings.  
Choose the following options:  
-
Recording Mode: allows you to set the maximum allowable recording time.  
Choose Limit for Multimedia Media Message, 10 Seconds, 30 Seconds,  
For Full Memory, or Video Share.  
-
-
Size: allows you to set the video size. Choose 176 x 144 or 128 x 96.  
Quality: allows you to select the video quality setting. Choose Fine, Normal,  
Low, or Economy.  
-
-
-
-
Audio Recording: allows you to choose whether to use audio in your video.  
Choose between On or Off (microphone is muted).  
White Balance: allows you to set the white balance for the camcorder. Choose  
Auto, Daylight, Cloudy, Incandescent, or Fluorescent.  
Default Storage: allows you to set a default storage location for the videos shot  
by your phone. Choose Phone or Memory Card.  
Default Name: allows you to set a default prefix name for the videos shot by  
your phone.  
• Camcorder Shortcuts: allows you to see the shortcut keys associated when  
using the camcorder.  
• Video Share: allows you to make a Video Share call. (This option will only  
display if you have the Video Share service.)  
2. Press the Back soft key to return to the picture viewer.  
3. You can use the keypad to quickly change the camera options using the  
camera shortcut keys.  
Camcorder Shortcuts  
Shortcut keys allow you to change options using your keypad, Navigation keys, and  
Volume key in capture mode. The following options are available.  
shoots video.  
adjust the image brightness (Left/Right).  
zooms in or out (Up/Down).  
switches the handset between camera and camcorder mode.  
changes the video size.  
changes the video quality.  
Using the Applications 132  
     
changes the recording mode.  
changes the effects used on the video.  
within the camcorder mode, this toggles the microphone  
On/Off (mute).  
sets a time delay (Off, 3, 5, or 10 seconds).  
opens the Video folder where the videos are stored.  
Camcorder Options after a Video is Taken  
After you have shot a video, you can use various options by pressing the Options  
soft key. Highlight an option and press the Select soft key or the  
following options are available:  
key. The  
Play: uses the Media Player to view the video segment.  
Send: allows you to attach the video to a Message or send it to a Bluetooth device.  
Delete: allows you to delete the video you have shot.  
ViewFinder: allows you exit from the video options menu and return to the  
camcorder’s viewfinder.  
Rename: allows you to rename the video file.  
Go to Video: allows you to access the list of videos stored within the  
Video folder.  
Lock: allows you to lock the video file to prevent deletion.  
Bluetooth Visibility: allows you to make the video visible to Bluetooth devices.  
Properties: allows you to view the properties for this video file.  
Player Settings: allows you to adjust the Visualization Type, Minimize Player, and the  
Media Player’s playback Volume level (0-5).  
Accessing the Video Folder  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight My Stuff, and press the Select soft key or the  
key.  
key.  
3. Highlight Video and press the Select soft key or the  
4. Use the Up or Down Navigation key to select a video file.  
5. To play the video, press the Select soft key or the  
key. The file is  
played in the Media Player application.  
133  
Media Player  
Media Player  
This feature allows you to:  
Access both local and streaming music, video, or playlists and then play then  
through a built in Media Player.  
Record Audio  
Record Audio allows you to record voice memos. It also allows you to send your  
audio clip to other people as an attachment of an MMS message. Recording time is  
limited to free memory space available.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight My Stuff, press the Select soft key or the  
key.  
3. Highlight the Audio folder and press the Options soft key.  
4. Highlight Record Audio and press the Select soft key or the  
key.  
5. To start recording, press the  
key. Record a memo by speaking into the  
microphone.  
6. Press the Stop soft key to stop the recording or pause the recording by  
pressing the key.  
If the recording time expires, the message is automatically saved. Press  
the Options soft key to display the following options:  
• Play: allows you to play the memo.  
• Record: allows you to save the current memo and begin another session.  
• Send via: allows you to send your memo to other people by using MMS or to a  
Bluetooth device.  
• Set as: allows you to set the audio file as a voice call ringtone or a specific  
caller’s ringtone.  
• Delete: allows you to delete the memo.  
• Rename: allows you to change the memo’s name.  
• Bluetooth Visibility: allows you to make the audio file visible to a Bluetooth  
device.  
• Lock: allows you to lock the Audio file.  
• Properties: displays the Name, Size, and Format of the voice memo.  
• Record Audio Settings: allows you to setup a recording preset: Default Name  
and Recording Time (1 min, 2 min, 3 min, 4 min, 5 min, or 60 min, Limit for  
MMS).  
7. To save these changes, press the Save soft key.  
8. To exit, press the Back soft key or the  
key.  
Using the Applications 134  
         
Recorded Audio  
This menu shows a list of saved voice memos. When a voice memo is recorded and  
saved, it is stored in the Recorded Audio folder. To access this menu use the  
following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight My Stuff, and press the Select soft key or the  
key.  
key.  
3. Highlight Audio and press the Select soft key or the  
4. Use the Up or Down Navigation key to select a recorded memo.  
5. A list of voice memos displays. To play a recording, press the Options soft  
key and press Play, or the  
6. To exit, press the Back soft key or the  
Alarms  
key.  
key.  
This feature allows you to:  
set the alarm to ring at a specific time.  
set the phone to switch on automatically and ring the alarm even if the phone is  
switched off.  
To set the alarm:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
key.  
4. Highlight Alarms and press the Select soft key or the  
key. The  
following options display:  
• Wake-up Alarm: the alarm rings to wake you up at the specified time.  
• Alarm 1: primary alarm setting.  
• Alarm 2: secondary alarm setting.  
• Alarm 3: third alarm setting.  
• Alarm 4: fourth alarm setting.  
• Auto Power-up: the alarm rings even when the phone is turned off.  
5. Select an alarm type and press the Options soft key or the  
key. Set the  
following options:  
• Alarm Activation: Use this to activate/deactivate this feature (On/Off). The only  
way to edit the remaining fields is to select On.  
• Alarm Time: use the alphanumeric keypad enter a time for the alarm to sound.  
135  
   
Alarms  
Note: Your phone is preset to a 12-hour format. To change the time format, see "Time & Date" on page 82.  
• Alarm Type: press the  
key to select a new type of alert notification (Melody,  
Increasing Melody, Vibration, Vibration then Melody, Vibration & Melody, or  
Vibration & Increasing Melody)  
• Alert Tone: press the  
key to select a tone from one of the My Stuff folders.  
• Alarm Volume: press the Left and Right Navigation key to adjust the volume  
level (1-7).  
• Alarm Day: press the  
key to access the Recurrence menu. Use the Up or  
key to select the day entry. Press the OK soft key to save  
Down Navigation key to highlight a occurrence of the day(s) you wish your alarm  
to sound. Press the  
your settings.  
• Snooze: use this option to set the snooze feature for the alarm (Off, 1 Min.,  
3 Min., 5 Min., 7 Min., or 10 Min).  
• Repeat: use set the number of times this alarm type can be repeated (1 Time, 2  
Times, 3 Times, 5 Times, or 10 Times). Snooze must be active for this feature to  
be enabled.  
6. Press the  
key to save these changes.  
Note: To stop the alarm when it rings, open the phone and press any key.  
Note: Press OK soft key to turn off the alarm.  
Setting Auto Power Alarms  
You can set the phone to ring the alarm when the time for an alarm comes, if the  
phone is switched off.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
key.  
4. Highlight Alarm and press the Select soft key or the  
key. Select Auto  
Power-up and press the Select soft key.  
5. Using the Up or Down Navigation key, highlight On and press the Save soft  
key or the key to activate the Autopower feature.  
If the menu option is set to Off, and the phone is switched off at the  
specified time, the alarm does not ring.  
6. When you have finished, press the  
key.  
Using the Applications 136  
Calendar  
The calendar feature allows you to view the Month, Week, and Day layout views. You  
can also create an Appointment, Anniversary, Holiday, Important, or Private entries. It  
also shows any Missed Alarm Events that have occurred. To access the Calender  
menu, use the following steps:  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
4. Highlight Calendar and press the Select soft key or the  
key.  
key.  
5. Press the Options soft key. Highlight Create and the entry (Appointment,  
Anniversary, Holiday, Important, or Private).  
6. Press the Select soft key or the  
key. The following options are  
available:  
Appointment  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
4. Highlight Calendar and press the Select soft key or the  
5. Press the Options soft key. Highlight Create, select Appointment, and  
press the Select soft key or the key to use the following options:  
key.  
• Title: enter a title for this appointment (up to 15 characters).  
• Details: enter a description for this appointment (up to 100 characters).  
• Start Date: enter a date for this appointment to begin.  
• Start Time: enter a time for this appointment to begin. Use the Right Navigation  
key to select AM or PM for the start time of the scheduled event and press the  
Select soft key.  
• End Date: enter a date for this appointment to end.  
• End Time: enter a time for this appointment to end. Use the Right Navigation  
key to select AM or PM for the start time of the scheduled event and press the  
Select soft key.  
• Location: enter a location description for this appointment (up to 15 characters).  
137  
   
Calendar  
• Alarm: allows you to set an alarm for this event. Press the  
key to select this  
option. Once selected, all remaining alarm settings are enabled.  
-
Before: allows you to the amount of time (minutes, hours, days) before your  
appointment, you wish the alarm to sound.  
• Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the  
key to select this audio file.  
• Repeat: allows you to set an the number of repetitions allowed for this  
appointment (Daily, Weekly, or Monthly). Press the  
key to select this option.  
Once selected, all remaining alarm settings are enabled.  
-
Every: allows you to set an the number of times the entry is repeat in the  
selected time frame.  
• Except Weekends: allows you to exempt non-work days (weekends) from the  
appointment schedule.  
• Until: allows you to set as duration for this appointment by assigning an  
expiration time (Disable, After 1 Month, After 1 Year, After 2 Years, or  
After 3 Years).  
6. When you have finished, press the  
key to save this new appointment  
entry.  
Anniversary  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
key.  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
4. Highlight Calendar and press the Select soft key or the  
5. Press the Options soft key. Highlight Create, select Anniversary, and  
press the Select soft key or the key to use the following options:  
key.  
• Occasion: enter a title for this occasion (up to 100 characters).  
• Date: enter a date for this anniversary to begin.  
• Alarm: allows you to set an alarm for this event. Press the  
key to select this  
option. Once selected, all remaining alarm settings are enabled.  
-
-
-
Before: allows you to the amount of time (day, week) before your appointment,  
you wish the alarm to sound.  
Alarm Time: allows you to enter a time for the alarm to begin notifying you of  
the occasion. Use the Right Navigation key to select AM or PM.  
Alarm Tone: allows you to choose an alarm tone. Once highlighted, press the  
key to select this audio file.  
Using the Applications 138  
• Repeat Every Year: allows you to set whether this entry is repeated on a yearly  
basis. Press the  
key to select this option. Once selected, all remaining alarm  
settings are enabled.  
6. When you have finished, press the  
key to save this new anniversary  
entry.  
Notes: The remaining Calendar entry types (Holiday, Important, or Private entries) contain similar fields and  
use similar creation procedures.  
Event Options  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
key.  
4. Highlight Calendar and press the Select soft key or the  
key.  
5. Select a day containing a Calendar entry and press the  
key. If the  
selected day has one or multiple Calendar entries, those are then displayed  
in a list.  
6. Highlight an entry and press the Options soft key to use one of the  
following Calendar entry options:  
• View: this option allows you view the details for a selected event.  
• Create: this option allows you to add an additional event to the selected day(s).  
• Send: this option allows you to send the information of the event to another party  
via either a text message or Bluetooth device.  
• View Mode: this option allows you view the Calendar entries in one of two ways:  
Weekly View (one week at a time) or Month View (one month at a time).  
• Event List: this option allows you view a list of all currently active events by type  
(Appointment, Anniversary, Holiday, Important, or Private).  
• Delete: this option allows you to delete the event from the calendar.  
• Save to My Stuff: this option allows you to save the event to your My Stuff  
folder.  
• Print via Bluetooth: this option allows you to print the details of the event on a  
Bluetooth compatible printer.  
• Settings: this option allows you to configure the Calendar’s Starting Day and  
Default View Mode.  
• Missed Alarm Event: this option displays any missed events.  
• Memory Status: this option displays a list of the different Calendar event  
categories along with the memory allocation for each.  
139  
Tasks  
Viewing an Event  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
key.  
4. Highlight Calendar and press the Select soft key or the  
key.  
The calendar displays with today date highlighted.  
5. Select the date of the event (s) you want to view and press the  
key or  
use the Navigation keys to move to the date with an assigned event.  
Note: The icon categories displayed at the bottom display any events scheduled for the day you selected.  
6. Press the Up or Down Navigation key to scroll to the previous or next  
event.  
7. When you have finished, press the  
key.  
Tasks  
This menu option allows you to create a “to do” entry of tasks which are created in a  
similar fashion to previously described Calendar entries.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select My Stuff and press the Select soft key or the  
3. Using the Up or Down Navigation key, highlight Applications and press  
the Select soft key or the key.  
4. Highlight Tasks and press the Select soft key or the  
5. Press the Options soft key. Highlight Create, and press the Select soft key  
or the key to use the following options:  
key.  
key.  
• Title: enter a title for this task (up to 15 characters).  
Task: enter a description for this task (up to 100 characters).  
• Start Date: enter a date for this task to begin.  
• Due Date: enter a date for this task to end.  
• Alarm: allows you to set an alarm for this event. Press the  
key to select this  
option. Once selected, all remaining alarm settings are enabled.  
-
before: allows you to the amount of time (day, week) before your appointment,  
you wish the alarm to sound.  
Using the Applications 140  
     
• Alarm Time: enter a time for this task to begin. Use the Right Navigation key to  
select AM or PM for the start time of the scheduled event and press the Select  
soft key.  
• Alert Tone: allows you to choose an alarm tone. Once highlighted, press the  
key to select this audio file.  
• Priority: allows you assign the task a priority (1, 2, or 3).  
6. When you have finished, press the  
key to save this new appointment  
entry.  
Note  
This option allows you to create notes to add to your events.  
1. Highlight Note and press the Select soft key or the  
key.  
2. A blank New Note screen displays. Press the Options soft key. Highlight  
Create, and press the Select soft key or the key.  
3. Enter your text and press the Options soft key and then the Save soft key.  
Calculator  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. Highlight Calculator and press the Select soft key or the  
key.  
2. Enter the first number using the numeric keys.  
Note: To include a decimal point or a bracket, press the left soft key until the symbol you want displays.  
3. Enter the operation for your calculation by pressing the Navigation keys,  
according to the illustration on the display.  
4. Enter the second number.  
5. To view the result, press the  
key.  
Tip Calculator  
With this feature, you can use the phone to calculate the amount of money left as a  
tip based on parameters such as: total bill amount, tip percentage, and number of  
members in your party.  
1. Highlight Tip Calculator and press the Select soft key or the  
key.  
2. Enter the values into the appropriate fields by using the numeric keys:  
• Bill  
• Tip(%)  
• # paying  
141  
           
Converter  
Note: To include a decimal point by pressing the  
key.  
3. The remaining fields indicate:  
• Tip($): the amount of the tip based on the figures entered.  
You pay: your share of the total check amount. This value is based on the figure  
entered within the # paying field.  
Converter  
The conversion menu provides the following conversion categories:  
Currency  
Length  
Weight  
Volume  
Area  
Temperature  
Highlight Converter, highlight the function, and press the Select soft key  
or the key.  
World Time  
World Time allows you to view the time of day or night in another parts of the world.  
World displays time in the 30 different time zones around the world.  
1. Highlight World Time and press the Select soft key or the  
key.  
2. Press the key to set the city or area as the new time zone. The  
displayed time will shift to reflect the time zone selected.  
3. Use the Left or Right Navigation keys to browse cities and times.  
Note: If the selected area is in Daylight Savings Time (DLS) area, you must press the Options soft key and  
select Daylight Saving. If the area does not have DLS, uncheck this option.  
Timer  
You can use this menu to set a countdown timer. To enable the Timer, use the  
following options:  
1. Press the Set soft key to enter the length of time.  
2. Enter the time and press the OK soft key.  
3. Press the  
key to start the timer. Press the  
key to stop the timer.  
Using the Applications 142  
       
Stopwatch  
You can use this menu to measure intervals of time for 50 separate times.  
1. Press the  
key to start the stopwatch.  
2. Press the  
to stop the stopwatch. Press the Reset soft key to erase all  
times recorded.  
143  
 
Accessing the MEdia Net Homepage  
Section 13: MEdia Net and WAP  
Topics Covered  
Your phone is equipped with a WAP (Wireless Application Protocol) browser which  
allows you to access the Internet. This section explains how to access the WAP  
services of your service provider and navigate the WAP browser.  
Accessing the MEdia Net Homepage  
1. In Idle mode, press the  
key to launch the WAP browser. You can also  
press the Menu soft key to access menu mode and highlight MEdia Net  
and press the Select soft key or the  
key.  
2. Select MEdia Net and press the Select soft key or the  
key. Your phone  
is connected to the network and loads the MEDia Net homepage. The  
content of the start-up homepage contains the following selections:  
• Search field: allows you enter a text string into the field and then search the  
MEdia Net database for matches. Once you have entered a word, press the  
Right Navigation key to select the Search button and press the  
begin your search.  
key to  
• My Links: provides you with quick access to your those sites which you have  
setup in this category. Highlight one of these entries and press the  
launch that web page.  
key to  
MEdia Net and WAP 144  
   
• Categories: provides you with a list of MEdia Net web pages containing links to  
a variety of special interest sites. Highlight a selection from this list and press  
the  
-
key. These categories can be edited from within Customize MEdia Net.  
WHAT’s HOT: provides a list of the most popular web page topics. Highlight a  
link from the list and press the key to be taken to that web page.  
-
Tones, Games, Pics: takes you to the MEdia Mall where you can sign up for the  
Tone Club (for discount rates on bulk ringtone orders) or purchase Ringtones,  
Answer Tones, Games, and Graphics. Highlight a link from the list and press the  
key to begin the purchase process.  
Note: Prior to purchasing downloadable tones, graphics, games, or other applications, it is necessary to  
setup an e-wallet account so that with every purchase, your account can easily be debited.  
-
Mail & Messaging: takes you to the MEdia Net messaging center where you  
can access a variety of web-based messaging services and applications such as:  
Mobile Email, Mobile IM, Yahoo! Mail/Messenger, Windows Live Mail/Messenger,  
AOL Mail, Chat & Date, Address Book, and Calendar. Highlight a service from the  
list and press the  
key to begin using the service.  
www.cingular.com.  
-
Sports: takes you to the MEdia Net Sports page listing where in addition to  
national sports headlines, you can enter your local ZIP code and receive  
information about your local teams. Highlight Continue and press the  
key.  
You can easily edit the teams listed within your My Teams section of this page by  
using your Navigation keys to select Edit (from the upper-right of the page), and  
press the  
key.  
Note: Prior to using this service you must agree to the terms of the service agreement and setup the  
service on your handset.  
-
-
Entertainment: takes you to the MEdia Net Entertainment page which provides  
you with links to some of the most popular entertainment news and videos.  
Highlight a link from the list and press the  
key to begin.  
More Categories: takes you to the MEdia Net Categories page which provides  
you with additional links to other web services such as: Cellular Video (page  
118), News, Weather & Travel, movies, Chat & Date, Finance, Yahoo!/Windows  
Live, AOL, Maps, En Español, Shopping, and Photo Services. Highlight a link  
from the list and press the  
key to begin.  
• My Account: provides you with access to a listing of your most recent  
purchases and available product (services). From the My Account screen,  
highlight My Purchases and press the  
key to begin.  
145  
Accessing the MEdia Net Homepage  
• Customize MEdia Net: provides you with a list of MEdia Net setup and service  
options which allow you to configure different aspects of the MEdia Net  
experience. Highlight a selection from this list and press the  
key.  
-
Edit My Links: provides you with a list of available Internet links which you can  
choose to add to your My Links section of the main Media Net homepage. To  
add a link, navigate to the Add to My Links section, highlight an entry, and  
press the  
section, highlight an entry, and press the  
highlight Remove, and press the key.  
key. To remove a link, navigate to the Move/Delete Links  
key. From the Edit My Links page,  
-
Edit Categories: allows you to edit those category entries which appear on the  
MEdia Net homepage. Although the first four entries (WHAT’S HOT, Tones,  
Games, Pics, and Cellular Video) can not be removed, the remaining entries can  
be toggled on or off. Highlight a category entry and press the  
on (appear on the page) or off (remove it from the homepage).  
key to toggle it  
-
-
Parental Control: provides you with settings which can be configured to restrict  
certain media content from being downloaded on the phone. For more  
Username & Password: allows you to setup a username and password prior to  
gaining access to the MEdia Net homepage and related services.  
Note: Prior to using this service you must agree to the terms of the service agreement and setup the service  
on your handset.  
-
MEdia Net Mail: allows you to access and edit the entries found within the  
MEdia Net messaging center. Although most of the entries can not be removed,  
the remaining entries can be toggled on or off by navigation to the top of the  
page, highlight Edit, and press the  
highlight an entry and press the  
key. From the Mail & Messaging page,  
key to toggle it on (appears on the Mail &  
Messaging page) or off (remove it from the Mail & Messaging page).  
MEdia Net Tour: allows you to take a quick guided tour through the main  
features of the MEdia Net pages (homepage, navigation, teams, etc..).  
Privacy Policy: provides the web address for Cellular’s Privacy Policy.  
-
-
• Help: provides you with list of some of the most frequently asked questions  
regarding MEdia Net functionality. Highlight a question and press the  
launch an on screen description  
key to  
3. To scroll through the screen, use the Up and Down Navigation keys.  
To exit the browser at any time, simply press the  
key.  
MEdia Net and WAP 146  
Accessing the MEdia Net Site  
There are several ways to access a WAP site:  
Selecting a link on the browser  
Using a bookmark item in the Favorites folder; use the Bookmarks option on the  
browser menu list or Favorites menu.  
Entering a URL address manually; use the Go to URL option on the browser menu  
list.  
Navigating with the WAP Browser  
1. To scroll through browser items, press the Up or Down Navigation keys.  
2. To select a browser item, highlight a MEdia Net entry and press the  
key  
or press the Options soft key and choose Select.  
3. To return to the previous page, press the  
key, or press the Options  
soft key and choose Back.  
4. To access the browser menu list, press the Menu soft key.  
5. To return to the start-up homepage, press the Menu soft key and select the  
Home option.  
Entering Text in the WAP Browser  
When you are prompted to enter text, the currently active text input mode is  
indicated on the screen. To change the text input mode, press the  
more times.  
key one or  
The following modes are available:  
Upper-Case Alphabet Mode (A): allows you to enter upper-case characters.  
Lower-Case Alphabet Mode (a): allows you to enter lower-case characters.  
Note: You can enter symbols in upper or lower case alphabet mode by pressing the 1 key.  
T9 Mode (T9): allows you to enter characters by pressing one key per letter. In this  
mode, you can use only the 0 key to display alternative words. To change case,  
press and hold the * key.  
Number Mode (1): allows you to enter numbers.  
147  
   
Navigating with the WAP Browser  
Selecting and Using Menu Options  
Various menus are available when you are using the WAP Browser to navigate the  
Wireless Web.  
To access a menu option, press the menu soft key. A menu list displays.  
Note: The menus may vary, depending on your version of the WAP Browser.  
The following options are available:  
Go: lets you navigate Forward (next sequenced web page) or Backward (to the  
previously visited web page) through pages in your browsing history.  
Reload: reloads the current page with updated information.  
Desktop View: changes the display mode of the browser.  
Page Size: change the page size of the displayed web page (Large, Normal, or Small).  
Go to Homepage: takes you back at any time to the homepage of the Wireless  
Web service provider.  
Add to Favorites: bookmarks the current page and marks it as a favorite site.  
View Favorites: accesses and displays the bookmarks assigned as favorite web  
pages.  
Send URL: send the URL of the current page via either a message or to another  
party via a Bluetooth device.  
Enter URL: allows you to manually enter the URL address of a WAP site. After  
entering an address, press the OK soft key to go there directly.  
Copy URL via Message: send the URL of the current page to another party as a  
message.  
Save: saves either the image of the current web page or the current page itself.  
Saved Pages: access the list of web pages you have saved.  
History: displays the list of web pages you have recently accessed.  
Advanced: allows you to change the following settings for the browser.  
Clear Cache: deletes the information stored in the cache. The cache stores the most  
recently accessed pages.  
Empty Cookies: delete cookies. Cookies are pieces of personal information sent to a  
web server while navigating the web.  
Cookie Options: sets whether or not cookies are stored on your phone. If you select  
Prompt, the phone will ask you to save the cookies on every page requiring  
cookies.  
Preferences: changes the settings for the web browser to suit your preference.  
MEdia Net and WAP 148  
Certificates: accesses certificate information from your phone.  
Page Details: displays the properties for the currently active web page.  
Browser Settings: selects a connection profile to be used when connecting to the  
Internet.  
About Browser: displays the access version and copyright information about the  
browser.  
Using Favorites  
While navigating through either the Internet or the MEdia Net pages, you can  
bookmark a site to quickly and easily access it at a future time. The URL addresses  
of the bookmarked sites are stored in the Favorites folder, wherein you can either  
use the 6-preset URL addresses and store your own favorite URL addresses.  
Accessing a WAP Site Using Favorites  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight MEdia Net and press the Select soft key or the  
key.  
3. Select Favorites and press the Select soft key.  
4. Select a bookmark item on the Favorite list. The preset URLs consist of:  
• Cellular Video  
• Chat  
• News  
• Sports  
• Weather  
• MEdia Net (homepage)  
5. Press the Options soft key to select Go to or press the  
Storing a URL Address as a Favorite  
1. When the Idle screen displays, press the Menu soft key.  
2. Select MEdia Net and press the Select soft key or the  
3. Select Enter URL and press the Select soft key.  
key.  
key.  
4. Enter the URL address and press the  
key to launch the web page.  
Tip: Use can use the  
key to cycle through that available symbols and choose the . (period) and  
the @ (at) needed for most website addresses.  
5. Use the Down Navigation key, highlight Add Favorite and press the  
key.  
6. Use the Down Navigation key and enter some descriptive text for this  
Favorites entry.  
149  
 
Downloading Multimedia Files  
7. Select Media Net > Select Favorite > Options > Add Favorite.  
8. Press the Go to soft key to launch the website.  
9. When you have finished, press the key.  
Editing Favorites  
1. From the Favorites list, select the bookmark you want to change.  
2. Press the Options soft key. Highlight Edit Favorite and press the  
key.  
3. Change the address and the name, as you would when storing a new one.  
4. Press the Save soft key.  
5. When you have finished, press the  
Deleting Favorites  
1. From the Favorites list, select the bookmark you want to delete.  
key.  
2. Press Options soft key. Highlight Delete and press the  
key.  
key.  
3. Highlight Selected and press the Select soft key or the  
4. Press the Yes soft key or the  
key to confirm the deletion.  
key.  
5. When you have finished, press the  
Downloading Multimedia Files  
You can buy a variety of multimedia files, such as ringtones, graphics, applications,  
Multimedia contents, and so on from the WAP browser and download them to your  
phone’s memory. Your phone has embedded links to the WAP sits providing you with  
download services, preset by your service provider.  
1. When the Idle screen displays, press the Menu soft key.  
2. Select AT&T Mall.  
3. Highlight Shop Tones, Shop Games, Shop Graphics, Shop Multimedia,  
or Shop Applications, depending on the type of items you want to buy.  
To access homepage of the online shopping mall, select MEdia Net Home.  
4. Find the item you want to download and follow the on-screen instructions  
to purchase it.  
Note: This content is delivered to you in Multimedia messages. You can retrieve the messages from the  
server and then save the items in your phone’s memory. you cannot forward these messages to other  
people or add the saved items to a Multimedia message.  
MEdia Net and WAP 150  
       
Using your History  
The History list provides you with a list of the most recently visited web sites. These  
entries can be used to return to previously unmarked web pages.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight MEdia Net and press the Select soft key or the  
key.  
key.  
3. Highlight History and press the Select soft key or the  
4. Use the Up or Down Navigation key to highlight an entry from the list.  
5. Press the Options soft key. Highlight Go to and press the Select soft key or  
the  
key.  
6. When you have finished, press the  
key to exit from the browser.  
Clearing the Cache  
The cache is the phone’s temporary memory in which the most recently accessed  
web pages are stored. You can clear the cache at anytime.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight MEdia Net and press the Select soft key or the  
3. Highlight Advanced and press the Select soft key or the  
4. Select Clear Cache and press the Select soft key or the  
key.  
key.  
key.  
5. Press the Yes soft key or the  
key to confirm the deletion.  
key.  
6. When you have finished, press the  
Clearing the Cookies  
A cookie is a small file which is placed on your phone by a web site during  
navigation. In addition to containing some site-specific information, it can also  
contain some personal information (such as a username and password) which can  
pose a security risk if not properly managed. You can clear this cookies from your  
phone at any time.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight MEdia Net and press the Select soft key or the  
key.  
key.  
3. Highlight Advanced and press the Select soft key or the  
4. Highlight Empty Cookies and press the Select soft key or the  
key.  
5. Press the Yes soft key or the  
key to confirm the deletion.  
key.  
6. When you have finished, press the  
151  
     
Changing the WAP Profiles  
Changing the WAP Profiles  
Your phone is wirelessly connecting to the Internet via a built in WAP browser.  
Connection can be made via either one of four available WAP browsers: MEdia Net  
wap1.x, MEDia Net wap2,x, AT&T MMS (MultiMedia Server), or AT&T IMS. Use this  
menu to create and customize the profiles containing the settings for connecting  
your phone to the network. You need these settings to use the web browser or send  
MMS messages or e-mails. Although the active connection can be changed by the  
user, it is recommended that this choice be made with the assistance of either the  
retailer or customer service representative.  
1. When the Idle screen displays, press the Menu soft key.  
2. Highlight MEdia Net and press the Select soft key or the  
key.  
3. Highlight Browser Settings and press the Select soft key or the  
key.  
4. Use the Up or Down Navigation key to highlight one of these options:  
• MEdia Net wap1.x  
• MEdia Net wap2.x  
• AT&T MMS  
• AT&T IMS  
5. Press the Options soft key.  
Notes: The WAPs are pre-configured and can not be altered on this screen. The MMS connection option can  
be edited, renamed, or deleted on this screen. Your phone is set up by default for connecting to the network.  
If you change the settings without first checking with your service provider, the web browser, MMS, and e-  
mail features may not work properly.  
6. To create a new connection, press the Options soft key, select New, and  
press the Select soft key or the  
key.  
- or -  
7. To edit the existing MMS, highlight this entry, press the Options soft key,  
select Edit, and press the Select soft key or the  
key.  
8. Select the parameter you want to edit:  
• Set Name: enter a profile name.  
• Access Name: edit the access point name.  
• Auth Type: select the type of authentication used for this WAP connection:  
None, Normal, or Secure.  
• User ID: enter the User ID required to connect to the network.  
• Password: enter the user password required to connect to the network.  
• Protocol: set the connection protocol used by the WAP browser: WAP or HTTP.  
• Home URL: enter the URL address of the page to be used as your homepage.  
MEdia Net and WAP 152  
     
• Gateway address: (WAP only) enter the gateway address of the proxy server.  
• Proxy address: (HTTP only) set the proxy server address and port.  
• Linger Time (Sec.): set a time period (in seconds) after which the network is  
disconnected if there has been no new data traffic in that time.  
• Advanced Settings: allows you to configure some of the IP-specific  
information: Static IP, Static DNS, Server information, and Traffic Class.  
-
-
-
Static IP: specify if you want to manually enter an IP address. If you want the IP  
address to be automatically assigned by the server, remove the check mark.  
Local phone IP: enter the IP address obtained from the network operator, if you  
checked the Static IP option.  
Static DNS: specify if you want to manually enter the Domain Name Server  
(DNS) address. If you want the address to be automatically assigned by the  
server, remove the check mark.  
-
-
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.  
Traffic Class: select the traffic class.  
Note: The WAP settings may vary depending on the service provider.  
153  
Section 14: Accessibility  
Topics Covered  
TTY Settings  
TTY Settings*  
TTY (also known as a TDD or Text Telephone) is a telecommunications device that  
allows people who are deaf or hard of hearing, or who have speech or language  
disabilities, to communicate via a telephone. This phone comes TTY-ready and only  
requires the insertion of the TTY device to enable this feature.  
Use the following steps to access the TTY settings:  
1. Inserting a TTY connector into the Headset/Adapter jack (on the right side of  
the phone) enables this function.  
For additional technical support you may access the following website or call  
1-888-987-4357.  
Section 14: Accessibility 154  
 
Section 15: Health and Safety Information  
Topics Covered  
This section outlines the safety precautions associated with using your phone. These  
safety precautions should be followed to safely use your phone.  
Health and Safety Information  
Exposure to Radio Frequency (RF) Signals  
Certification Information (SAR)  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for radio frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. government. These  
155  
     
Health and Safety Information  
FCC exposure limits are derived from the recommendations of two expert  
organizations, the National Counsel on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,  
the recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure of  
the rate of absorption of RF energy by the human body expressed in units of watts  
per kilogram (W/kg). The FCC requires wireless phones to comply with a safety limit  
of 1.6 watts per kilogram (1.6 W/kg). The FCC exposure limit incorporates a  
substantial margin of safety to give additional protection to the public and to account  
for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested frequency  
bands. Although the SAR is determined at the highest certified power level, the  
actual SAR level of the phone while operating can be well below the maximum value.  
This is because the phone is designed to operate at multiple power levels so as to  
use only the power required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the exposure limit established by the  
FCC. Tests for each model phone are performed in positions and locations (e.g. at  
the ear and worn on the body) as required by the FCC. For body worn operation, this  
phone has been tested and meets FCC RF exposure guidelines when used with an  
accessory that contains no metal and that positions the handset a minimum of  
1.5 cm from the body. Use of other accessories may not ensure compliance with FCC  
RF exposure guidelines.  
The FCC has granted an Equipment Authorization for this mobile phone with all  
reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines. The maximum SAR values for this model phone as reported to the FCC  
are:  
GSM  
850  
Head: 0.588 W/Kg.  
Body-worn: 1.050 W/Kg.  
Health and Safety Information 156  
1900  
Head: 0.290 W/Kg.  
Body-worn: 0.393 W/Kg.  
WCDMA  
850  
Head: 0.5765 W/Kg.  
Body-worn: 0.497 W/Kg.  
1900  
Head: 0.115 W/Kg.  
Body-worn: 0.168 W/Kg.  
SAR information on this and other model phones can be viewed on-line at  
http://www.fcc.gov/oet/ea. To find information that pertains to a particular model  
phone, this site uses the phone FCC ID number which is usually printed somewhere  
on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number. Once  
you have the FCC ID number for a particular phone, follow the instructions on the  
website and it should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be obtained at  
www.fcc.gov/cgb/sar.  
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile phones and genuine Samsung accessories.  
UL Certified Travel Adapter  
The Travel Adaptor for this phone has met UL 1310 safety requirements. Please  
adhere to the following safety instructions per UL guidelines.  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW  
THESE INSTRUCTIONS.  
157  
     
Consumer Information on Wireless Phones  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN ATTACHMENT  
PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR THE POWER OUTLET. THIS  
POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR  
HORIZONTAL OR FLOOR MOUNT POSITION.  
Consumer Information on Wireless Phones  
The U.S. Food and Drug Administration (FDA) has published a series of Questions  
and Answers for consumers relating to radio frequency (RF) exposure from wireless  
phones. The FDA publication includes the following information:  
What kinds of phones are the subject of this update?  
The term wireless phone refers here to hand-held wireless phones with built-in  
antennas, often called "cell," "mobile," or "PCS" phones. These types of wireless  
phones can expose the user to measurable radio frequency energy (RF) because of  
the short distance between the phone and the user's head. These RF exposures are  
limited by Federal Communications Commission safety guidelines that were  
developed with the advice of FDA and other federal health and safety agencies.  
When the phone is located at greater distances from the user, the exposure to RF is  
drastically lower because a person's RF exposure decreases rapidly with increasing  
distance from the source. The so-called "cordless phones," which have a base unit  
connected to the telephone wiring in a house, typically operate at far lower power  
levels, and thus produce RF exposures well within the FCC's compliance limits.  
Do wireless phones pose a health hazard?  
The available scientific evidence does not show that any health problems are  
associated with using wireless phones. There is no proof, however, that wireless  
phones are absolutely safe. Wireless phones emit low levels of radio frequency  
energy (RF) in the microwave range while being used. They also emit very low levels  
of RF when in the stand-by mode. Whereas high levels of RF can produce health  
effects (by heating tissue), exposure to low level RF that does not produce heating  
effects causes no known adverse health effects. Many studies of low level RF  
exposures have not found any biological effects. Some studies have suggested that  
some biological effects may occur, but such findings have not been confirmed by  
additional research. In some cases, other researchers have had difficulty in  
reproducing those studies, or in determining the reasons for inconsistent results.  
Health and Safety Information 158  
 
What is FDA's role concerning the safety of wireless  
phones?  
Under the law, FDA does not review the safety of radiation-emitting consumer  
products such as wireless phones before they can be sold, as it does with new drugs  
or medical devices. However, the agency has authority to take action if wireless  
phones are shown to emit radio frequency energy (RF) at a level that is hazardous to  
the user. In such a case, FDA could require the manufacturers of wireless phones to  
notify users of the health hazard and to repair, replace or recall the phones so that  
the hazard no longer exists.  
Although the existing scientific data do not justify FDA regulatory actions, FDA has  
urged the wireless phone industry to take a number of steps, including the following:  
Support needed research into possible biological effects of RF of the type emitted  
by wireless phones;  
Design wireless phones in a way that minimizes any RF exposure to the user that  
is not necessary for device function; and  
Cooperate in providing users of wireless phones with the best possible information  
on possible effects of wireless phone use on human health.  
FDA belongs to an interagency working group of the federal agencies that have  
responsibility for different aspects of RF safety to ensure coordinated efforts at the  
federal level. The following agencies belong to this working group:  
National Institute for Occupational Safety and Health  
Environmental Protection Agency  
Federal Communications Commission  
Occupational Safety and Health Administration  
National Telecommunications and Information Administration  
The National Institutes of Health participates in some interagency working group  
activities, as well.  
FDA shares regulatory responsibilities for wireless phones with the Federal  
Communications Commission (FCC). All phones that are sold in the United States  
must comply with FCC safety guidelines that limit RF exposure. FCC relies on FDA  
and other health agencies for safety questions about wireless phones.  
159  
Consumer Information on Wireless Phones  
FCC also regulates the base stations that the wireless phone networks rely upon.  
While these base stations operate at higher power than do the wireless phones  
themselves, the RF exposures that people get from these base stations are typically  
thousands of times lower than those they can get from wireless phones. Base  
stations are thus not the primary subject of the safety questions discussed in this  
document.  
What are the results of the research done already?  
The research done thus far has produced conflicting results, and many studies have  
suffered from flaws in their research methods. Animal experiments investigating the  
effects of radio frequency energy (RF) exposures characteristic of wireless phones  
have yielded conflicting results that often cannot be repeated in other laboratories. A  
few animal studies, however, have suggested that low levels of RF could accelerate  
the development of cancer in laboratory animals. However, many of the studies that  
showed increased tumor development used animals that had been genetically  
engineered or treated with cancer-causing chemicals so as to be pre-disposed to  
develop cancer in absence of RF exposure. Other studies exposed the animals to RF  
for up to 22 hours per day. These conditions are not similar to the conditions under  
which people use wireless phones, so we don't know with certainty what the results  
of such studies mean for human health.  
Three large epidemiology studies have been published since December 2000.  
Between them, the studies investigated any possible association between the use of  
wireless phones and primary brain cancer, glioma, meningioma, or acoustic  
neuroma, tumors of the brain or salivary gland, leukemia, or other cancers. None of  
the studies demonstrated the existence of any harmful health effects from wireless  
phones RF exposures. However, none of the studies can answer questions about  
long-term exposures, since the average period of phone use in these studies was  
around three years.  
What research is needed to decide whether RF exposure  
from wireless phones poses a health risk?  
A combination of laboratory studies and epidemiological studies of people actually  
using wireless phones would provide some of the data that are needed. Lifetime  
animal exposure studies could be completed in a few years. However, very large  
numbers of animals would be needed to provide reliable proof of a cancer promoting  
effect if one exists. Epidemiological studies can provide data that is directly  
applicable to human populations, but ten or more years' follow-up may be needed to  
provide answers about some health effects, such as cancer.  
Health and Safety Information 160  
This is because the interval between the time of exposure to a cancer-causing agent  
and the time tumors develop - if they do - may be many, many years. The  
interpretation of epidemiological studies is hampered by difficulties in measuring  
actual RF exposure during day-to-day use of wireless phones. Many factors affect  
this measurement, such as the angle at which the phone is held, or which model of  
phone is used.  
What is FDA doing to find out more about the possible  
health effects of wireless phone RF?  
FDA is working with the U.S. National Toxicology Program and with groups of  
investigators around the world to ensure that high priority animal studies are  
conducted to address important questions about the effects of exposure to radio  
frequency energy (RF).  
FDA has been a leading participant in the World Health Organization international  
Electromagnetic Fields (EMF) Project since its inception in 1996. An influential result  
of this work has been the development of a detailed agenda of research needs that  
has driven the establishment of new research programs around the world. The  
Project has also helped develop a series of public information documents on EMF  
issues.  
FDA and Cellular Telecommunications & Internet Association (CTIA) have a formal  
Cooperative Research and Development Agreement (CRADA) to do research on  
wireless phone safety. FDA provides the scientific oversight, obtaining input from  
experts in government, industry, and academic organizations. CTIA-funded research  
is conducted through contracts to independent investigators. The initial research will  
include both laboratory studies and studies of wireless phone users. The CRADA will  
also include a broad assessment of additional research needs in the context of the  
latest research developments around the world.  
What steps can I take to reduce my exposure to radio  
frequency energy from my wireless phone?  
If there is a risk from these products - and at this point we do not know that there is  
- it is probably very small. But if you are concerned about avoiding even potential  
risks, you can take a few simple steps to minimize your exposure to radio frequency  
energy (RF). Since time is a key factor in how much exposure a person receives,  
reducing the amount of time spent using a wireless phone will reduce RF exposure.  
161  
Consumer Information on Wireless Phones  
If you must conduct extended conversations by wireless phone every day, you  
could place more distance between your body and the source of the RF, since the  
exposure level drops off dramatically with distance. For example, you could use a  
headset and carry the wireless phone away from your body or use a wireless  
phone connected to a remote antenna.  
Again, the scientific data do not demonstrate that wireless phones are harmful. But if  
you are concerned about the RF exposure from these products, you can use  
measures like those described above to reduce your RF exposure from wireless  
phone use.  
What about children using wireless phones?  
The scientific evidence does not show a danger to users of wireless phones,  
including children and teenagers. If you want to take steps to lower exposure to  
radio frequency energy (RF), the measures described above would apply to children  
and teenagers using wireless phones. Reducing the time of wireless phone use and  
increasing the distance between the user and the RF source will reduce RF  
exposure.  
Some groups sponsored by other national governments have advised that children  
be discouraged from using wireless phones at all. For example, the government in  
the United Kingdom distributed leaflets containing such a recommendation in  
December 2000. They noted that no evidence exists that using a wireless phone  
causes brain tumors or other ill effects. Their recommendation to limit wireless  
phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Do hands-free kits for wireless phones reduce  
risks from exposure to RF emissions?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that hands-free kits reduce risks. Hands-free  
kits can be used with wireless phones for convenience and comfort. These systems  
reduce the absorption of RF energy in the head because the phone, which is the  
source of the RF emissions, will not be placed against the head. On the other hand, if  
the phone is mounted against the waist or other part of the body during use, then  
that part of the body will absorb more RF energy. Wireless phones marketed in the  
U.S. are required to meet safety requirements regardless of whether they are used  
against the head or against the body. Either configuration should result in  
compliance with the safety limit.  
Health and Safety Information 162  
Do wireless phone accessories that claim to shield  
the head from RF radiation work?  
Since there are no known risks from exposure to RF emissions from wireless  
phones, there is no reason to believe that accessories that claim to shield the head  
from those emissions reduce risks. Some products that claim to shield the user from  
RF absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike "hand-free" kits, these so-called  
"shields" may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
In February 2002, the Federal trade Commission (FTC) charged two companies that  
sold devices that claimed to protect wireless phone users from radiation with  
making false and unsubstantiated claims. According to FTC, these defendants  
lacked a reasonable basis to substantiate their claim.  
What about wireless phone interference with  
medical equipment?  
Radio frequency energy (RF) from wireless phones can interact with some electronic  
devices. For this reason, FDA helped develop a detailed test method to measure  
electromagnetic interference (EMI) of implanted cardiac pacemakers and  
defibrillators from wireless telephones. This test method is now part of a standard  
sponsored by the Association for the Advancement of Medical instrumentation  
(AAMI). The final draft, a joint effort by FDA, medical device manufacturers, and  
many other groups, was completed in late 2000. This standard will allow  
manufacturers to ensure that cardiac pacemakers and defibrillators are safe from  
wireless phone EMI. FDA has tested wireless phones and helped develop a voluntary  
standard sponsored by the Institute of Electrical and Electronic Engineers (IEEE). This  
standard specifies test methods and performance requirements for hearing aids and  
wireless phones so that no interference occurs when a person uses a compatible  
phone and a compatible hearing aid at the same time. This standard was approved  
by the IEEE in 2000.  
FDA continues to monitor the use of wireless phones for possible interactions with  
other medical devices. Should harmful interference be found to occur, FDA will  
conduct testing to assess the interference and work to resolve the problem.  
163  
Road Safety  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (Updated 12/1/2006):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration's (OSHA):  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
National Radiation Protection Board (UK):  
US Food and Drug Administration  
Road Safety  
Your wireless phone gives you the powerful ability to communicate by voice, almost  
anywhere, anytime. But an important responsibility accompanies the benefits of  
wireless phones, one that every user must uphold.  
When driving a car, driving is your first responsibility. When using your wireless  
phone behind the wheel of a car, practice good common sense and remember the  
following tips:  
1. Get to know your wireless phone and its features, such as speed dial and  
redial. If available, these features help you to place your call without taking  
your attention off the road.  
2. When available, use a hands-free device. If possible, add an additional  
layer of convenience and safety to your wireless phone with one of the  
many hands free accessories available today.  
3. Position your wireless phone within easy reach. Be able to access your  
wireless phone without removing your eyes from the road. If you get an  
incoming call at an inconvenient time, let your voice mail answer it for you.  
Health and Safety Information 164  
 
4. Let the person you are speaking with know you are driving; if necessary,  
suspend the call in heavy traffic or hazardous weather conditions. Rain,  
sleet, snow, ice and even heavy traffic can be hazardous.  
5. Do not take notes or look up phone numbers while driving. Jotting down a  
"to do" list or flipping through your address book takes attention away  
from your primary responsibility, driving safely.  
6. Dial sensibly and assess the traffic; if possible, place calls when you are  
not moving or before pulling into traffic. Try to plan calls when your car will  
be stationary. If you need to make a call while moving, dial only a few  
numbers, check the road and your mirrors, then continue.  
7. Do not engage in stressful or emotional conversations that may be  
distracting. Make people you are talking with aware you are driving and  
suspend conversations that have the potential to divert your attention from  
the road.  
8. Use your wireless phone to call for help. Dial 9-1-1 or other local  
emergency number in the case of fire, traffic accident or medical  
emergencies. Remember, it is a free call on your wireless phone!  
9. Use your wireless phone to help others in emergencies. If you see an auto  
accident, crime in progress or other serious emergency where lives are in  
danger, call 9-1-1 or other local emergency number, as you would want  
others to do for you.  
10. Call roadside assistance or a special non-emergency wireless assistance  
number when necessary. If you see a broken-down vehicle posing no  
serious hazard, a broken traffic signal, a minor traffic accident where no  
one appears injured, or a vehicle you know to be stolen, call roadside  
assistance or other special non-emergency number.  
"The wireless industry reminds you to use your phone safely when driving."  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Provided by the Cellular Telecommunications & Internet Association.  
For more information, please call 1-888-901-SAFE, or visit our web-site  
Provided by the Cellular Telecommunications & Internet Association.  
165  
Responsible Listening  
Responsible Listening  
Caution!: Avoid potential hearing loss.  
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cellular telephones, at high  
volume settings for long durations may lead to permanent noise-induced hearing  
loss. This includes the use of headphones (including headsets, earbuds, and  
Bluetooth or other wireless devices). Exposure to very loud sound has also been  
associated in some studies with tinnitus (a ringing in the ear), hypersensitivity to  
sound and distorted hearing.  
Individual susceptibility to noise-induced hearing loss and potential hearing problem  
varies. Additionally, the amount of sound produced by a portable audio device varies  
depending on the nature of the sound, the device settings, and the headphones that  
are used. As a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings and equipment.  
You should follow some commonsense recommendations when using any portable  
audio device:  
Set the volume in a quiet environment and select the lowest volume at which you  
can hear adequately.  
When using headphones, turn the volume down if you cannot hear the people  
speaking near you or if the person sitting next to you can hear what you are  
listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen  
to your portable device in a noisy environment, you noise-cancelling headphones  
to block out background environmental noise. By blocking background  
environment noise, noise cancelling headphones should allow you to hear the  
music at lower volumes than when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required  
before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock  
concerts, that might cause temporary hearing loss. Temporary hearing loss might  
cause unsafe volumes to sound normal.  
Health and Safety Information 166  
   
Do not listen at any volume that causes you discomfort. If you experience ringing in  
your ears, hear muffled speech or experience any temporary hearing difficulty  
after listening to your portable audio device, discontinue use and consult your  
doctor.  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
Internet: www.audiology.org  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Voice: (301) 496-7243  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
National Institute for Occupational Safety and Health  
Hubert H. Humphrey Bldg.  
200 Independence Ave., SW  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4647)  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
167  
Operating Environment  
Operating Environment  
Remember to follow any special regulations in force in any area and always switch  
your phone off whenever it is forbidden to use it, or when it may cause interference  
or danger. When connecting the phone or any accessory to another device, read its  
user's guide for detailed safety instructions. Do not connect incompatible products.  
As with other mobile radio transmitting equipment, users are advised that for the  
satisfactory operation of the equipment and for the safety of personnel, it is  
recommended that the equipment should only be used in the normal operating  
position (held to your ear with the antenna pointing over your shoulder if you are  
using an external antenna).  
Using Your Phone Near Other Electronic Devices  
Most modern electronic equipment is shielded from radio frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless phone. Consult the manufacturer to discuss alternatives.  
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless phone and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the phone more than six (6) inches from their implantable  
medical device when the phone is turned ON;  
Should not carry the phone in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the  
potential for interference;  
Should turn the phone OFF immediately if there is any reason to suspect that  
interference is taking place.  
Should read and follow the directions from the manufacturer of your implantable  
medical device. if you have any questions about using your wireless phone with  
such a device, consult your health care provider.  
Hearing Aid Compatibility with Mobile Phones  
When some mobile phones are used near some hearing devices (hearing aids and  
cochlear implants), users may detect a buzzing, humming, or whining noise. Some  
hearing devices are more immune than others to this interference noise, and phones  
also vary in the amount of interference they generate.  
Health and Safety Information 168  
   
The wireless telephone industry has developed ratings for some of their mobile  
phones, to assist hearing device users in finding phones that may be compatible  
with their hearing devices. Not all phones have been rated. Phones that are rated  
have the rating on their box or a label on the box.  
The ratings are not guarantees. Results will vary depending on the user’s hearing  
device and hearing loss. If your hearing device happens to be vulnerable to  
interference, you may not be able to use a rated phone successfully. Trying out the  
phone with your hearing device is the best way to evaluate it for your personal  
needs.  
M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to  
generate less interference to hearing devices than phones that are not labeled. M4 is  
the better/higher of the two ratings.  
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more  
usable with a hearing device’s telecoil (“T Switch” or “Telephone Switch”) than  
unrated phones. T4 is the better/higher of the two ratings. (Note that not all hearing  
devices have telecoils in them.)  
Hearing devices may also be measured for immunity to this type of interference. Your  
hearing device manufacturer or hearing health professional may help you find results for  
your hearing device. The more immune your hearing aid is, the less likely you are to  
experience interference noise from mobile phones.Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your phone  
off in health care facilities when any regulations posted in these areas instruct you to  
do so. Hospitals or health care facilities may be using equipment that could be  
sensitive to external RF energy.  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle. You should also consult the manufacturer of any equipment  
that has been added to your vehicle.  
Posted Facilities  
Switch your phone off in any facility where posted notices require you to do so.  
Potentially Explosive Environments  
169  
 
Emergency Calls  
Switch your phone off when in any area with a potentially explosive atmosphere and  
obey all signs and instructions. Sparks in such areas could cause an explosion or fire  
resulting in bodily injury or even death.  
Users are advised to switch the phone off while at a refueling point (service station).  
Users are reminded of the need to observe restrictions on the use of radio equipment  
in fuel depots (fuel storage and distribution areas), chemical plants or where blasting  
operations are in progress.  
Areas with a potentially explosive atmosphere are often but not always clearly  
marked. They include below deck on boats, chemical transfer or storage facilities,  
vehicles using liquefied petroleum gas (such as propane or butane), areas where the  
air contains chemicals or particles, such as grain, dust or metal powders, and any  
other area where you would normally be advised to turn off your vehicle engine.  
Emergency Calls  
This phone, like any wireless phone, operates using radio signals, wireless and  
landline networks as well as user-programmed functions, which cannot guarantee  
connection in all conditions. Therefore, you should never rely solely on any wireless  
phone for essential communications (medical emergencies, for example).  
Remember, to make or receive any calls the phone must be switched on and in a  
service area with adequate signal strength. Emergency calls may not be possible on  
all wireless phone networks or when certain network services and/or phone features  
are in use. Check with local service providers.  
To make an emergency call:  
1. If the phone is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911  
or other official emergency number). Emergency numbers vary by location.  
3. Press the  
key.  
If certain features are in use (call barring, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult this  
document and your local cellular service provider.  
When making an emergency call, remember to give all the necessary information as  
accurately as possible. Remember that your phone may be the only means of  
communication at the scene of an accident; do not cut off the call until given  
permission to do so.  
Health and Safety Information 170  
 
Restricting Children's access to your Phone  
Your phone is not a toy. Children should not be allowed to play with it because they  
could hurt themselves and others, damage the phone or make calls that increase  
your phone bill.  
FCC Notice and Cautions  
FCC Notice  
The phone may cause TV or radio interference if used in close proximity to receiving  
equipment. The FCC can require you to stop using the phone if such interference  
cannot be eliminated.  
Vehicles using liquefied petroleum gas (such as propane or butane) must comply  
with the National Fire Protection Standard (NFPA-58). For a copy of this standard,  
contact the National Fire Protection Association, One Batterymarch Park, Quincy, MA  
02269, Attn: Publication Sales Division.  
Cautions  
Any changes or modifications to your phone not expressly approved in this  
document could void your warranty for this equipment, and void your authority to  
operate this equipment. Only use approved batteries, antennas and chargers. The  
use of any unauthorized accessories may be dangerous and void the phone warranty  
if said accessories cause damage or a defect to the phone.  
Although your phone is quite sturdy, it is a complex piece of equipment and can be  
broken. Avoid dropping, hitting, bending or sitting on it.  
Other Important Safety Information  
Only qualified personnel should service the phone or install the phone in a vehicle.  
Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Check regularly that all wireless phone equipment in your vehicle is mounted and  
operating properly.  
Do not store or carry flammable liquids, gases or explosive materials in the same  
compartment as the phone, its parts or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great  
force. Do not place objects, including both installed or portable wireless equipment  
in the area over the air bag or in the air bag deployment area. If wireless  
equipment is improperly installed and the air bag inflates, serious injury could  
result.  
171  
   
Product Performance  
Switch your phone off before boarding an aircraft. The use of wireless phone in  
aircraft is illegal and may be dangerous to the aircraft's operation.  
Failure to observe these instructions may lead to the suspension or denial of  
telephone services to the offender, or legal action, or both.  
Product Performance  
Getting the Most Out of Your Signal Reception  
The quality of each call you make or receive depends on the signal strength in your  
area. Your phone informs you of the current signal strength by displaying a number  
of bars next to the signal strength icon. The more bars displayed, the stronger the  
signal.  
If you're inside a building, being near a window may give you better reception.  
Understanding the Power Save Feature  
If your phone is unable to find a signal after 15 minutes of searching, a Power Save  
feature is automatically activated. If your phone is active, it periodically rechecks  
service availability or you can check it yourself by pressing any key.  
Anytime the Power Save feature is activated, a message displays on the screen.  
When a signal is found, your phone returns to standby mode.  
Understanding How Your Phone Operates  
Your phone is basically a radio transmitter and receiver. When it's turned on, it  
receives and transmits radio frequency (RF) signals. When you use your phone, the  
system handling your call controls the power level. This power can range from 0.006  
watts to 0.2 watts in digital mode.  
Maintaining Your Phone's Peak Performance  
For the best care of your phone, only authorized personnel should service your  
phone and accessories. Faulty service may void the warranty.  
There are several simple guidelines to operating your phone properly and  
maintaining safe, satisfactory service.  
If your phone is equipped with an external antenna, hold the phone with the  
antenna raised, fully-extended and over your shoulder.  
Do not hold, bend or twist the phone's antenna, if applicable.  
Do not use the phone if the antenna is damaged.  
If your phone is equipped with an internal antenna, obstructing the internal  
antenna could inhibit call performance.  
Health and Safety Information 172  
 
Speak directly into the phone's receiver.  
Avoid exposing your phone and accessories to rain or liquid spills. If your phone  
does get wet, immediately turn the power off and remove the battery. If it is  
inoperable, call Customer Care for service.  
Availability of Various Features/Ring Tones  
Many services and features are network dependent and may require additional  
subscription and/or usage charges. Not all features are available for purchase or use  
in all areas. Downloadable Ring Tones may be available at an additional cost. Other  
conditions and restrictions may apply. See your service provider for additional  
information.  
Battery Standby and Talk Time  
Standby and talk times will vary depending on phone usage patterns and conditions.  
Battery power consumption depends on factors such as network configuration,  
signal strength, operating temperature, features selected, frequency of calls, and  
voice, data, and other application usage patterns.  
Battery Precautions  
Avoid dropping the cell phone. Dropping it, especially on a hard surface, can  
potentially cause damage to the phone and battery. If you suspect damage to the  
phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Use the battery only for its intended purpose.  
If you use the phone near the network's base station, it uses less power; talk and  
standby time are greatly affected by the signal strength on the cellular network  
and the parameters set by the network operator.  
Follow battery usage, storage and charging guidelines found in the user’s guide.  
Battery charging time depends on the remaining battery charge and the type of  
battery and charger used. The battery can be charged and discharged hundreds of  
times, but it will gradually wear out. When the operation time (talk time and  
standby time) is noticeably shorter than normal, it is time to buy a new battery.  
If left unused, a fully charged battery will discharge itself over time.  
Use only Samsung-approved batteries and recharge your battery only with  
Samsung-approved chargers. When a charger is not in use, disconnect it from the  
power source.  
Do not use incompatible cell phone batteries and chargers. Some Web sites and  
second-hand dealers, not associated with reputable manufacturers and carriers,  
173  
     
Care and Maintenance  
might be selling incompatible or even counterfeit batteries and chargers.  
Consumers should purchase manufacturer or carrier recommended products and  
accessories.  
Extreme temperatures will affect the charging capacity of your battery: it may  
require cooling or warming first.  
Do not leave the battery in hot or cold places, such as in a car in summer or winter  
conditions, as you will reduce the capacity and lifetime of the battery. Always try to  
keep the battery at room temperature. A phone with a hot or cold battery may  
temporarily not work, even when the battery is fully charged. Li-ion batteries are  
particularly affected by temperatures below 0 °C (32 °F). The battery should not  
be charged at temperatures below 0 degrees C (32 degrees F) or above 45  
degrees C (113 degrees F).  
Do not place the phone in areas that may get very hot, such as on or near a  
cooking surface, cooking appliance, iron, or radiator.  
Do not get your phone or battery wet. Even though they will dry and appear to  
operate normally, the circuitry could slowly corrode and pose a safety hazard.  
Do not short-circuit the battery. Accidental short-circuiting can occur when a  
metallic object (coin, clip, key, jewelry or pen) causes a direct connection between  
the + and - terminals of the battery (metal strips on the battery), for example when  
you carry a spare battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Do not crush, puncture or put a high degree of pressure on the battery as this can  
cause an internal short-circuit, resulting in overheating.  
Dispose of used batteries in accordance with local regulations. In some areas, the  
disposal of batteries in household or business trash may be prohibited. For safe  
disposal options for Li-Ion batteries, contact your nearest Samsung authorized  
service center. Always recycle. Do not dispose of batteries in a fire.  
Care and Maintenance  
Your phone is a product of superior design and craftsmanship and should be treated  
with care. The suggestions below will help you fulfill any warranty obligations and  
allow you to enjoy this product for many years.  
Keep the phone and all its parts and accessories out of the reach of small children.  
Keep the phone dry. Precipitation, humidity and liquids contain minerals that will  
corrode electronic circuits.  
Do not use the phone with a wet hand. Doing so may cause an electric shock to  
you or damage to the phone.  
Health and Safety Information 174  
 
Do not use or store the phone in dusty, dirty areas, as its moving parts may be  
damaged.  
Do not store the phone in hot areas. High temperatures can shorten the life of  
electronic devices, damage batteries, and warp or melt certain plastics.  
Do not store the phone in cold areas. When the phone warms up to its normal  
operating temperature, moisture can form inside the phone, which may damage  
the phone's electronic circuit boards.  
Do not drop, knock or shake the phone. Rough handling can break internal circuit  
boards.  
Do not use harsh chemicals, cleaning solvents or strong detergents to clean the  
phone. Wipe it with a soft cloth slightly dampened in a mild soap-and-water  
solution.  
Do not paint the phone. Paint can clog the device's moving parts and prevent  
proper operation.  
Do not put the phone in or on heating devices, such as a microwave oven, a stove  
or a radiator. The phone may explode when overheated.  
If your phone is equipped with an external antenna, use only the supplied or an  
approved replacement antenna. Unauthorized antennas or modified accessories  
may damage the phone and violate regulations governing radio devices.  
If the phone, battery, charger or any accessory is not working properly, take it to  
your nearest qualified service facility. The personnel there will assist you, and if  
necessary, arrange for service.  
175  
Standard Limited Warranty  
Section 16: Warranty Information  
Topics Covered  
Standard Limited Warranty  
Standard Limited Warranty  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG") warrants to the  
original purchaser ("Purchaser") that SAMSUNG's Phones and accessories  
("Products") are free from defects in material and workmanship under normal use  
and service for the period commencing upon the date of purchase and continuing for  
the following specified period of time after that date:  
Phone  
1 Year  
1 Year  
Batteries  
Leather Case/ Pouch  
Holster  
90 Days  
90 Days  
1 Year  
Other Phone Accessories  
What is Not Covered? This Limited Warranty is conditioned upon proper use of  
Product by Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abuse, neglect, unusual physical, electrical or  
electromechanical stress, or modification of any part of Product, including antenna,  
or cosmetic damage; (b) equipment that has the serial number removed or made  
illegible; (c) any plastic surfaces or other externally exposed parts that are scratched  
or damaged due to normal use; (d) malfunctions resulting from the use of Product in  
conjunction with accessories, products, or ancillary/peripheral equipment not  
furnished or approved by SAMSUNG; (e) defects or damage from improper testing,  
operation, maintenance, installation, or adjustment; (f) installation, maintenance,  
and service of Product, or (g) Product used or purchased outside the United States or  
Canada. This Limited Warranty covers batteries only if battery capacity falls below  
80% of rated capacity or the battery leaks, and this Limited Warranty does not cover  
any battery if (i) the battery has been charged by a battery charger not specified or  
Warranty Information 176  
       
approved by SAMSUNG for charging the battery, (ii) any of the seals on the battery  
are broken or show evidence of tampering, or (iii) the battery has been used in  
equipment other than the SAMSUNG phone for which it is specified.  
What are SAMSUNG's Obligations? During the applicable warranty period,  
SAMSUNG will repair or replace, at SAMSUNG's sole option, without charge to  
Purchaser, any defective component part of Product. To obtain service under this  
Limited Warranty, Purchaser must return Product to an authorized phone service  
facility in an adequate container for shipping, accompanied by Purchaser's sales  
receipt or comparable substitute proof of sale showing the date of purchase, the  
serial number of Product and the sellers' name and address. To obtain assistance on  
where to deliver the Product, call Samsung Customer Care at 1-888-987-4357.  
Upon receipt, SAMSUNG will promptly repair or replace the defective Product.  
SAMSUNG may, at SAMSUNG's sole option, use rebuilt, reconditioned, or new parts  
or components when repairing any Product or replace Product with a rebuilt,  
reconditioned or new Product. Repaired/replaced leather cases, pouches and  
holsters will be warranted for a period of ninety (90) days. All other repaired/replaced  
Product will be warranted for a period equal to the remainder of the original Limited  
Warranty on the original Product or for 90 ays, whichever is longer. All replaced  
parts, components, boards and equipment shall become the property of SAMSUNG.  
If SAMSUNG determines that any Product is not covered by this Limited Warranty,  
Purchaser must pay all parts, shipping, and labor charges for the repair or return of  
such Product.  
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY? EXCEPT AS SET  
FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN, PURCHASER TAKES THE  
PRODUCT "AS IS," AND SAMSUNG MAKES NO WARRANTY OR REPRESENTATION  
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR  
OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT,  
INCLUDING BUT NOT LIMITED TO:  
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY PARTICULAR  
PURPOSE OR USE;  
WARRANTIES OF TITLE OR NON-INFRINGEMENT;  
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;  
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED  
THEREIN; OR  
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE,  
SPECIFICATION OR CONTRACT PERTAINING THERETO.  
177  
Standard Limited Warranty  
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE CONSTRUED TO  
CREATE AN EXPRESS WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO  
THE PRODUCT. ALL IMPLIED WARRANTIES AND CONDITIONS THAT MAY ARISE BY  
OPERATION OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY  
LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS WRITTEN WARRANTY  
STATED HEREIN. SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW  
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY  
TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY  
KIND RESULTING FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE  
THE PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR LOSS OF  
USE OF THE PRODUCT OR FROM THE BREACH OF THE EXPRESS WARRANTY,  
INCLUDING INCIDENTAL, SPECIAL, CONSEQUENTIAL OR SIMILAR DAMAGES, OR  
LOSS OF ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM  
ANY TORT (INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT COMMITTED  
BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR  
FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY. SOME  
STATES/PROVINCES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL  
OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY  
NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU  
MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE/PROVINCE TO  
PROVINCE. THIS LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN  
THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S  
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS HELD ILLEGAL  
OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR  
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY FOR THE  
REMAINDER OF THIS LIMITED WARRANTY WHICH PURCHASER ACKNOWLEDGES IS  
AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS  
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE  
THIRD-PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE PRODUCT.  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS AND THERE ARE NO  
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRDPARTY SOFTWARE OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE  
OR EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR  
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,  
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY SOFTWARE OR  
Warranty Information 178  
EQUIPMENT LIE SOLELY WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER  
OR SUPPLIER OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY  
BE.  
This Limited Warranty allocates risk of Product failure between Purchaser and  
SAMSUNG, and SAMSUNG's Product pricing reflects this allocation of risk and the  
limitations of liability contained in this Limited Warranty. The agents, employees,  
distributors, and dealers of SAMSUNG are not authorized to make modifications to  
this Limited Warranty, or make additional warranties binding on SAMSUNG.  
Accordingly, additional statements such as dealer advertising or presentation,  
whether oral or written, do not constitute warranties by SAMSUNG and should not be  
relied upon.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the standard methods,  
the data only appears to be removed on a superficial level, and it may be possible for  
someone to retrieve and reuse the data by means of special software.  
To avoid unintended information leaks and other problems of this sort, it is  
recommended that the device be returned to Samsung’s Customer Care Center for  
an Extended File System (EFS) Clear which will eliminate all user memory and return  
all settings to default settings. Please contact the Samsung Customer Care Center  
for details.  
Important!: Please provide warranty information (proof of purchase) to Samsung’s Customer Care Center in  
order to provide this service at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein St.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, L.P.  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
179  
 
Standard Limited Warranty  
©2007 Samsung Telecommunications America. All rights reserved.  
No reproduction in whole or in part allowed without prior written approval.  
Specifications and availability subject to change without notice.  
Warranty Information 180  
Shop Music 105  
Audio 100  
Index  
Auto Reply 79  
Numerics  
A
B
3GP 107  
Battery  
charging 7  
installing 6  
AAC 107  
AAC+ 107  
low indicator 9  
BellSouth 72  
Billboard mobile 115  
Bluetooth 88  
Accessing a Menu Function 35  
Activation of Bluetooth 88  
My Devices 89  
Add word 49  
Adding songs to a Playlist 110  
Address Book  
Bluetooth Device  
Stereo 108  
Bluetooth Services 90  
Searching for a Number 33  
AIM 72  
Airplane Profile 80  
All Calls  
C
Call Alert Type 79  
Call Forwarding  
Always 86, 87  
Alerts On Call 85  
Answering Mode 85  
Auto Reject 84  
If Busy 86, 87  
If No Reply 86, 87  
If Out of Reach 86, 87  
Call Functions 23  
Adjusting the Call Volume 30  
Answering a Call 25  
Correcting the Number 23  
Making a Call 23  
Recent Calls 26  
Call Status Tones 85  
Show My Number 84  
Alphabet mode (ABC and abc) 48  
Answering Mode  
Any Key 85  
Normal 85  
AOL 72  
Applications 125  
Alarm 134, 135  
Calculator 141  
Redialing Last Number 24  
Silent Mode 30  
Call Settings  
All Calls 84  
Calendar 137  
Converter 142  
Note 141  
Tasks 140  
Data Calls 87  
Voice Calls 86  
Call Status Tones  
Call Connect Tone 85  
Call End Tone 85  
Minute Minder 85  
Tip Calculator 141  
AT&T Music  
181  
 
Call Time 28  
ID song! 112  
Call Waiting 33  
Manage ID’s 112  
Music Player 107  
Music Video 114  
Music Video Options 115  
The Buzz 115  
Activate 86, 87, 88  
Check Status 86, 88  
Deactivate 86, 87, 88  
Camcorder Options 131  
Camcorder Shortcuts 132  
Effects 131  
Clear key 21  
Clearing Memory 97  
Command Keys 20  
Configuring  
Go to Video 131  
Record Video 131  
Settings 132  
Your Phone’s Bluetooth Name  
Take Photo 131  
Camera  
Your Phone’s Bluetooth  
Taking Pictures 126  
Camera lens 15  
Camera Options 126  
Camera Shortcuts 128  
Effects 127  
Security 90  
Your Phone’s Bluetooth  
Visibility 89  
Your Phone’s Connectivity 91  
Your Phone’s USB Connection  
Frames 127  
Go to Graphics 127  
Record Video 127  
Settings 128  
Connecting to a Bluetooth Device 89  
Creating a Playlist 109  
D
Shooting Mode 126  
Timer 127, 131  
Camera Shortcuts  
Shortcut Keys 128, 132  
Cellular Video 118  
Alerts 122  
Data Call Time 29  
Data Calls  
Call Forwarding 87  
Call Waiting 88  
Data Volume 29  
Deleting Favorites 150  
Dialing a Number  
Address Book 53  
Digital Music Stores 105  
Display  
Customizing 122  
Favorites 122  
My Purchases 123  
Options 119  
Parental Controls 123  
Charging battery 7  
Cingular Music 104  
Community 116  
Exit 113  
icons 16  
Display Settings 81  
Light Settings 82  
Main Display 81  
Driving Profile 80  
Help me out 113  
182  
E
K
L
eAAC+ 107  
Key Tones  
Muting 32  
Keypad Tones 79  
Editing Favorites 150  
End key 21  
Ending a Call 24  
Entering Text 48  
Language  
Changing the Text Entry Mode  
Input T9 83  
Screen Text 83  
Left soft key 20  
Light Settings  
Backlight Time 82  
Brightness 82  
Keypad Light 82  
Low battery indicator 9  
Using Alphabet Mode 50  
Using Numbers 52  
Using Symbols 51  
Using T9 Mode 49  
F
FDN (Fixed Number) Mode 60  
Folder Open/Close Tone 80  
Front LCD 15  
M
M4A 107  
Main Display  
Functions and Options 19  
G
Background Color 82  
Dialing Display 81  
Font Color 81  
Font Size 81  
Font Type 81  
Games 101  
Getting Started 5  
USIM card information 5  
Voicemail 9  
Graphics 101, 102  
Greeting Message 81  
Idle Screen Setting 81  
Menu Style 81  
Pop Up List Menu 81  
Wallpaper 81  
H
Health and Safety Information 155  
I
Making a Call  
Icons, description 16  
Importing a Playlist 111  
In Call Options 31  
Address Book 24  
Managing Adderss Book Entries 61  
Managing the Address Book  
Copying an entry to the Phone  
Installing the microSD Card 8  
International Call 23  
J
Media Clip  
Jump to track time 120  
Options 120  
Media Player  
Multitasking 108  
183  
Meeting Profile 80  
Memory card slot 15  
Memory Status 98  
Menu Navigation 35  
Menu Outline 36  
Message Alert Repetition 79  
Message Alert Tone 79  
Message Alert Type 79  
Messaging 63  
O
Options  
During a Call 30  
Putting a Call on Hold 30  
Outdoor Profile 80  
P
Phone  
icons 16  
Turning on/off 9  
Phone Settings  
Language 83  
Types of Messages 63  
Missed Call  
Call Back 27  
Own Number 84  
Shortcuts 84  
Deleting 28  
Details 27  
Phone Sounds Volume 80  
Playing Music Transferred from the  
Handset 107  
Saving the Number 27  
Send Message 28  
Viewing 27  
Power Off Type 80  
Power On Type 79  
MobiRadio 113  
MP3 107  
MP4 107  
MPEG 107  
R
Record Audio 134  
Muisc Channel 114  
Multimedia Files  
Downloading 150  
Multitasking 108  
Music Apps 117  
Mute 33  
Remove songs from a Playlist 110  
Responsible Listening 166  
Right soft key 20  
Ringtone Volume 79  
S
Safe Use of your phone 157  
Security 94  
N
Navigation key 22  
Network Services Settings 88  
Normal Profile 78  
Incoming Call 79  
Change PIN Code 96  
Change PIN2 Code 96  
Change the Phone Password  
FDN Mode 95  
Lock Applications 95  
Phone Lock 94  
New Messages 79  
Phone Sounds 79  
Number mode 48, 49  
Numeric 49  
PIN Check 94  
SIM Lock 94  
184  
Security Settings 94  
Send key 21  
Symbols 49  
Service Dialing Numbers 62  
Settings 78  
T
T9 Mode  
Application Settings 93  
Call Settings 84  
Connectivity 88  
Display Settings 81  
Memory Settings 97  
Phone Settings 83  
Profiles 78  
Reset Settings 96  
Security 94  
enter a word 49  
T9 mode 48  
Text Input Method  
Changing 48  
Text Messages 63  
Time & Date  
Date Format 83  
Home Zone 82  
Set Date 83  
Software Update 93  
Time & Date 82  
Set Time 83  
Time Format 83  
Shooting Video 130  
Shortcuts 36  
Show Number  
Time Zone Updating 82  
Transferring Music  
From the Digital Music Stores  
By Network 84  
Hide 84  
Show 84  
Windows Media Player 106  
Travel adapter 7  
Turning on/off  
Silent Profile 80  
Soft Keys 20  
Sound Settings 78  
Other Profiles 80  
Speakerphone Key 31  
Speed Dial  
Setting Up Entries 58  
Standard Limited Warranty  
phone 9  
U
Understanding Your Address book 53  
Adding a New Contact 55  
Group 60  
Own Phone Number 60  
Speed Dial 58  
Stereo Bluetooth Device 108  
Storing a Number  
Address Book 55, 57  
Storing a number  
Phone’s Memory 55  
USIM Card 57  
Using Contacts List 53  
Understanding Your Phone 12  
Features of Your Phone 12  
Front View of Your Phone 15,  
Open View of Your Phone 13  
USIM 5  
USIM card  
Streaming Music 113  
Streaming a Music Channel  
185  
installing 6  
Using Management  
Checking the Memory Status  
Deleting all of the Phone book  
Entries 61  
Using the Camcorder 130  
V
Video Categories 121  
Video Clip  
Viewing 115, 121  
Video Share 25  
In-Call 26  
Play a Recording 26  
Viewing an Event 140  
Voice Call Ringtone 79  
Voice Calls  
Auto Redial 86  
Call Forwarding 86  
Call Waiting 86  
Voice Mail 10  
Changing Name and Number  
W
WAP Profiles  
Changing 152  
Warranty Information 176  
Windows Live Hotmail 72  
Windows Media Player 106  
WMA 107  
186  

Toshiba Portege G710 User Manual
Sony Xperia arco S LT26w User Manual
Sony Ericsson Z520i User Manual
Sony CMD Z5 User Manual
Sentry Industries CA110 User Manual
Seagate Momentus ST9808210A User Manual
SanDisk SDUFD2AB 4096 User Manual
Saeco Coffee Makers XXCX User Manual
Roberts Radio CR9934 User Manual
Panasonic CQ C7300N User Manual