SGH-A637 Series
P O R T A B L E
M O B I L E
User Manual
Q U A D - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
GH68-19296A
Printed in Korea.
Licensed by Qualcomm Incorporated under one or more of the following patents: U.S.Patent No.
4, 901, 307; 5, 056, 109; 5, 099, 204; 5, 101, 501; 5, 103, 459; 5, 107, 225; 5, 109, 390.
®
The Bluetooth word mark, figure mark (stylized "B Design"), and combination mark (Bluetooth word mark and "B Design") are registered
trademarks and are wholly owned by the Bluetooth SIG.
TM
microSD and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
1
2
3
4
Section 1: Getting Started
This section describes the first steps to operating your phone.
battery cover up and off (2), as shown below.
SIM Card Information
When you subscribe for 3G cellular network services, you receive
a plug-in SIM (Subscriber Identity Module) card loaded with your
subscription details, such as your PIN, and available optional
services.
Activating Your Phone
Activating your phone requires several things: inserting the SIM
card, charging the battery, and turning the phone on.
2. Lift the battery up (1) and away (2) from the phone, as
ᮣ
If necessary, power-off the phone by pressing and holding the
key until the power-off image is displayed.
shown.
Removing the Battery
1. Press in on the battery cover release (1) and pull the
5
Installing and Removing the SIM Card
3. To remove the SIM, slide it gently out of the socket.
Important!: The plug-in SIM card and its contacts can be easily damaged by
scratches or bending. Use caution when inserting or removing
the card, and keep all SIM cards out of reach of children.
1. Remove the back cover and battery.
2. Make sure the gold contacts of the SIM card are face
down, then slide the SIM card completely into the socket.
Note: The angled corner of the SIM should be inserted as shown above. The
correct insertion is shown on the phone itself. Improperly inserting the
SIM can cause the phone to not recognize the SIM.
Replacing the Battery
1. To reinstall the battery, with the battery cover open, align
the battery tabs with the slots at the bottom of the phone.
Getting Started
6
2. Press the battery down until it clicks into place. Make sure
that the battery is properly installed and not obstructing
the SIM card before replacing the cover.
Note: The battery must be properly installed before charging the battery or
switching on the phone.
Charging the Battery
Your phone is powered by a rechargeable Li-ion battery. Use the
wall charger to charge the battery, and use only Samsung
approved batteries and chargers.
Note: You must fully charge the battery before using your phone for the first
time. A fully discharged battery requires up to 4 hours of charge time.
Note: For connection to an electrical supply not located in the U.S., you must
use an adaptor of the proper configuration for the power outlet. Use of
the wrong adaptor could damage your phone and void your warranty.
3. With the battery in position in the phone, hook the top of
the battery cover back on the handset (1) and press it
down (2) until it clicks.
1. Open the side slot and plug the connector of the wall
charger jack into the jack on the side of the phone.
+
7
Note: The previous illustration is the correct and incorrect method for
connecting the charger. If the incorrect method is attempted, damage
to the accessory port will occur therefore voiding the phone’s warranty.
2. Open the side slot and carefully insert the microSD™ card.
2. Plug the adaptor into a standard AC wall outlet.
3. When the phone is completely charged (
), unplug the
charger from the power outlet.
4. Remove the adapter from the phone by gently pulling the
connector out and replace the plastic cover back over the
open jack.
Incorrect
Correct
Important!: The battery charging function may stop if you are on a call or
viewing a streaming-video while charging your battery.
3. Push the microSD™ card into the slot until it clicks into
place.
Note: During charging, you must unplug the adapter before removing the
battery from the phone to avoid damage.
Warning!: Please note the printed circuit side is facing down when inserting
the card.
Installing the microSD™ Card
To add additional memory to your phone, you can insert a
microSD™ card into the memory card slot, located on the upper
left side of the phone. Use the following instructions and
illustrations for proper insertion and removal.
4. Replace the battery cover.
Note: The phone supports up to an 8GB microSD™ card
Getting Started
8
Removing the microSD™ Card
Note: Do not turn on the phone when mobile phone use is prohibited.
2. If the phone asks, enter a password and press the Confirm
soft key or the
key. (For further details, see “Change
2. Firmly press the microSD™ card until you hear a click and
Phone Password” on page 81.)
then gently pull the card from the slot.
The Idle screen displays while the phone searches for your
network. The signal strength bars show adequate signal
after a network is found.
3. Replace the battery cover.
Low Battery Indicator
When the battery is weak and only a few minutes of talk time
remain, a warning tone sounds, the “Battery Low” message
repeats at regular intervals on the display, and the empty battery
Note: The display language is preset to Automatic at the factory. To change
icon (
) blinks. The backlight turns off to conserve the
remaining battery power.
3. When you wish to switch off the phone, press and hold the
key until the power-off image is displayed.
Note: If your phone is in Silent Mode, the Low Battery Indicator defaults to
from Vibration to Mute, you will only see a flashing message
indicating a low battery.
Setting Up Your Voice Mail
Note: If your service provider did not pre-configure your voicemail server
number, you will need to store the voicemail server number before
accessing the server. Your service provider can give you the number.
If the battery level becomes too low, the phone automatically
turns off. Recharge your battery.
Turning the Phone On or Off
Setting Up Your Personal Options
1. In Idle mode, press and hold the
1. Press and hold the
or the
key until the phone
key.
power-on screen displays.
9
2. Follow the voice mail prompts to the voice mail main menu
6. Enter your new Voice Server number and press the Save
to set up your personal Voice Mail options, such as:
soft key or the
7. Press the
Text Conventions
This manual provides condensed information about how to use
your phone. To make this possible, the following terms and
icon (➔) appear in place of repeatedly-used procedural steps:
key to save this new number.
•
•
•
•
Turn Notification On/Off
key to return to Idle mode.
Change Administration Options
For Greeting or Recorded Name
Change Notification Options
Changing the Voice Mail Name and Number
Your SIM card gives you the default service number of the voice
mail center. However, you may need to change the number. Use
the following procedures to change your voice mail number.
highlight UsetheNavigationkey(
)tomoveahighlighting
effect onto a menu item or screen item of interest.
select
After “highlighting” a menu item or screen item,
1. In Idle mode, press the Menu (right) soft key
to
press the
key to launch, access, or save a
access Menu mode.
highlighted menu item or screen field of interest.
2. Select Messaging
3. Press the Edit soft key
4. To edit the Voice Server Name, highlight Name and press
and press to delete the current name and then use
➔
Message Settings
➔
Voice Mail.
➔
Used in place of “select” in long “drill down”
procedure steps.
.
Example: “...Settings
➔
Calls
➔
Voice Call...”
your keypad to enter a replacement name.
- or -
5. To edit the Voice Mail Number, highlight Center Address
and press
to delete the current number.
Getting Started
10
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
displays the screen and the icons that are displayed when the
phone is in use.
Front View of Your Phone
The following illustrations show the main elements of your
phone:
Features of Your Phone
Your phone is lightweight, easy-to-use and offers many
significant features. The following list outlines a few of the
features included in your phone:
•
•
•
•
•
•
•
User friendly, menu-driven access to features and options
Bluetooth wireless access
Camera and camcorder
Video Sharing
Instant Messaging capability
E-mail
Featured applications provide alarms, calendar, calculator, record
audio, converter, timer, stopwatch, and world time.
•
•
•
•
•
•
File viewer
Multimedia Message Service (MMS)
Multimedia capability (with included Music Player)
Photo caller ID
Speakerphone capability
Web browser
11
Keys
6. Voice Mail key: Press and hold the
key to
automatically dial your voicemail.
The following list correlates to the open and front view
illustrations.
7. Alphanumeric keypad: Use these keys to enter numbers,
1. Earpiece/Speaker: Used to listen to audio and music from
your phone.
letters and some special characters. When in Idle mode,
press and hold the
server or press and hold
prefix.
key to access your voicemail
to enter an International call
2. Display: Allows you to see when you have an incoming
call or message. It also displays date, time, network type,
signal strength, and battery power icons, and any icons
associated with alerts or alarms.
8. Special Function keys:
[ ] character for calling
Asterisk/Shift key—enters the
*
3. Menu access/Confirm key (WAP browser): When
navigating through a menu accepts the highlighted choice
in the menu. If you press once in Idle mode, the WAP
browser will launch.
features. In text mode, press to change the character input
type.
[ ] character for
—enters the pound #
Pound/Space key
calling features. In text entry mode, press to enter a space
between characters.
4. Left Soft key: Performs the function indicated by the
screen text on the bottom of the display.
Press and hold the
to lock/unlock the keypad. Press
5. Send key: Allows you to place or receive a call. In standby
mode, press the key once to access the Recent Call log. If
you press and hold the key down, you will initiate the most
recent call from the Recent Call log. Allows you to power
the phone on.
and hold activate/deactivate the Silent profile
to
.
9. Microphone: Allows the other callers to hear you clearly
when you are speaking to them.
Understanding Your Phone
12
10. Clear key: Deletes characters from the display when you
are in text entry mode. Deletes items when in an
15. Volume keys/Menu Navigation: Used to adjust the ringer
volume in standby mode, to mute the incoming call ringer,
or to adjust the voice volume during a call.
application. When in a main menu, press to return to the
previous menu. A quick press of the
Calendar in Month view.
key displays the
Can also be used to browse through the menu options or to
adjust playback volume when the Music Player is active.
11. Camera key: Launches the camera and camcorder
functionality of the handset.
12. Power On/Off/Menu Exit key: Ends a call. Press and hold
this key for a few seconds to power your phone On or Off.
While in the main menu, it returns the phone to standby
mode and cancels your input. When you receive an
incoming call, press to reject call.
13. Right Soft key: Performs the function indicated by the
screen text on the bottom of the display.
14. Directional keys on the Navigation key: These keys allow
you to browse menus, sub menus, and lists. Press the Up
or Down Navigation keys when jumping to highlighted
links on the web. Each key also acts as a shortcut to
launch applications from the Idle screen.
13
hands-free conversations.
Side Views of Your Phone
2. Earpiece/Speaker: Used to listen to audio and music from
your phone.
3. Display: Allows you to see when you have an incoming
call or message. It also displays date, time, network type,
signal strength, and battery power icons, and any icons
associated with alerts or alarms.
4. Volume keys/Menu Navigation: Used to adjust the ringer
volume in standby mode, to mute the incoming call ringer,
or to adjust the voice volume during a call.
Can also be used to browse through the menu options or to
adjust playback volume when the Music Player is active.
5. Camera key: In Standby mode, press and hold this key to
turn on the camera. In Camera mode, press this key to
take a picture.
Keys
The following list correlates to the side view illustrations.
1. Headset jack/Adapter jack: Allows you to plug in the
travel adapter (power), optional PC connection cable (data
transfer), and optional headset for safe, convenient,
Understanding Your Phone
14
Can also be used to browse through the menu options or to
adjust playback volume when the Music Player is active.
Back View of Your Phone
3. Camera key: In Standby mode, press and hold this key to
turn on the camera. In Camera mode, press this key to
take a picture.
4. Back Cover Release: Used to release the lock holding the
back cover in place so that you can remove it.
5. Back Cover: Use to cover the back of your phone. Must be
removed so that you can install/remove the SIM card,
microSD™ Memory Card, and/or the battery.
Main Display Layout
The display has 3 areas:
Icons
Text and
graphic area
1. Camera lens: Used to take pictures and shoot videos.
AT&T
2. Volume keys/Menu Navigation: Used to adjust the ringer
volume in standby mode, to mute the incoming call ringer,
or to adjust the voice volume during a call.
Options
Menu
Soft key indicator
15
Icons
Appears when there is no network coverage available.
When you are out of the service area, you cannot make
or receive voice calls.
Shows the received signal strength. The greater the
number of bars, the stronger the signal.
Appears when an alarm is set on your phone.
AppearswhenthephoneisaccessingservicesinaGPRS
network. When data is being transferred, this icon
animates.
Appears when the incoming alert is set to Vibration.
Appears when the phone is accessing services in an
EDGE network. When data is being transferred, this icon
animates.
Appears when your incoming phone calls are being
forwarded to another number.
Appears when the phone is accessing services in a 3G
(UMTS) network. When data is being transferred, this
icon animates.
Appears when a new voice mail has been received.
Appears when a new email has been received.
Appears when a new text message has been received.
Appears when the phone is accessing services in a 3G+
(HSDPA) network. When data is being transferred, this
icon animates.
Appears when a new multimedia message has been
received.
AppearswhenaTTYadapterispluggedintothehandset,
making it accessible via a keyboard for the hearing or
speech impaired.
Appearswhenapush-messageshasbeenreceivedfrom
the WAP server.
Appears when a call is in progress.
Appears when a new Over the Air (OTA) software update
file has been received.
Understanding Your Phone
16
Appears after your memory card has been inserted.
Appearswhenthephone’sprofileissettoDriving.Inthis
case, the speaker is active. In this case, the speaker is
active and will launch the currently selected ringtone or
melody when the associated notification is activated.
This icon is accompanied on screen by the Audio icon.
Appears when Bluetooth wireless technology is active.
When transferring data, this icon blinks red and blue.
Appears when Bluetooth wireless technology is
connecting with a device. It appears a solid red until the
connection is set, then changes to a solid blue.
Appears when the phone’s profile is set to Outdoor. In
this case, the speaker is active, the volume settings are
raised to their highest levels, any currently active
ringtones or melodies are activated, and the phone’s
vibrate feature is activated.
AppearswhenaBluetoothwirelessheadsetisactiveand
in use.
Shows the level of your battery. The more bars you see,
the more power you have remaining.
Appears when you are using the phone’s Music Player.
Appears when you are connected to a PC via a USB port.
Back Light
A back light illuminates the display and the keypad when you
press any key. It turns off when no keys are pressed within a
given period of time, and/or dims the light, depending on the
settings in the Backlight Time menu.
Note: The default phone profile is Normal, the profile is editable and the
displayed icons may vary according to the setting.
Selecting Functions and Options
Your phone offers a set of functions that can be customized for
your ease and specific needs. These functions are arranged in
menus and sub-menus, accessed using the two soft keys. Each
Appears when the phone’s profile is set to Silent. In this
case, the speaker is muted and the phone vibrates and
displays information. The Speaker Off icon is
accompanied on screen by the Vibration icon.
17
menu and sub-menu allows you to view and alter the settings of
a particular function.
•
•
Recent Calls: allows you to access the numbers of calls you’ve
recently dialed, received, or missed.
Empty: (locations 9-#) allows you to program an additional set of
frequently used features.
If you select the Options soft key
in Idle mode, the
following displays under the title of My Menu:
–
Select an empty slot and press the
Use the Menu and Navigation keys to select a feature, then press the
Options Assign soft key or the key.
In some functions, you may be asked for a password or PIN.
Enter the code and press the Select soft key or the key.
key.
•
•
•
•
YELLOWPAGES: allows you to perform a Business, Category, or
Location search for listed phone numbers.
AT&T Navigator: provides an audible and visual, JAVA-based driving
aid that uses GPS navigation.
–
➔
Bluetooth: allows you to use the Bluetooth functionality of the
handset.
When you access a list of options, your phone highlights the
currently active option. If, however, there are only two options,
such as On/Off or Enable/Disable, your phone highlights the
option that is not currently active, so that you can select it
directly.
®
®
Mobile Email: allows you to check your Yahoo! Mail, AOL , AIM,
®
Windows Live Hotmail, AT&T Yahoo! , BellSouth, and other e-
mail providers quickly and easily.
•
Tools: provides access to and allows you to use the Camera,
Record Audio files, set Alarms, use the Calendar and features,
get a list of Recent Calls, create Tasks, create Notes, use the
Calculator, use the Tip Calculator, use the Converter (for
currency, length, weight and volume), view World Time, set the
Timer, and use the Stopwatch.
Selecting Options
To view the various functions and options available and to select
the one you want:
•
•
Press the appropriate soft key.
To select the function displayed or the option highlighted, press the
•
•
Alarms: allows you to set or alter alarm settings, including a Wake-up
Alarm.
Select soft key or the
To view the next function or highlight the next option on a list, press the
Down Navigation key or the key on the right side of the phone.
key.
•
Calendar: allows you to view the Month, Week, and Day layout
views. You can also create an Appointment, Anniversary,
Holiday, Important, or Private entries.
Understanding Your Phone
18
•
•
•
To move back to the previous function or option on a list, press the Up
Navigation key or the key on the right side of the phone.
•
•
In the Idle screen, press the Options (left) soft key
My Menu screen.
to open the
To move back up one level in the menu structure, press the Back soft
key.
When in a menu mode, the left soft key
function is Select.
Right Soft Key
To exit the menu structure without changing the settings, press the
key.
Some functions of the right soft key are as follows.
•
In the Idle screen, press the Menu (right) soft key
nine menu icons. See ‘Selecting Functions and Options” on page 17.
to display the
Command Keys
Functions for the soft keys are defined by what appears above
•
When in a menu mode, the right soft key function is Back
.
each in the display. There are two soft keys: Left
and
Clear Key
Right
.
The CLR key is used to erase or clear numbers, text, or symbols
from the display. You can also use to return to a previous
menu or to return to standby mode from any menu. At the Idle
screen, a quick press displays the calendar in Month view.
•
If you enter an incorrect character, briefly press
(and delete) the character.
to backspace
•
•
To erase the entire sentence, press and hold
.
To back up one menu level, briefly press
.
Soft Keys
End Key
The roles of the soft keys vary depending on the function you are
currently using; the labels on the bottom line of the display just
above each key indicate their current role.
The End key
calls, and return to the standby mode.
is used to turn on/off your phone, disconnect
•
•
Press and hold the End key
to turn on/off your phone.
Left Soft Key
Briefly press once to disconnect a call.
Some functions of the left soft key are as follows.
19
•
Press
to return to standby mode from any menu.
is used to answer calls, dial calls, and to
Each key also acts as a shortcut to launch applications from the
Idle screen.
Send Key
Create New Message
The Send key
recall the last number(s) dialed, received, or missed.
•
•
•
•
Press
Press
once to answer calls.
My Stuff
Choose
Community
to power on your phone.
Enter a number and briefly press
Briefly press in standby mode to display a list of recent calls to
and from your phone.
to make a call.
Address Book
•
•
Press
Press
twice in standby mode to call the most recent number.
to pick up a waiting call.
Navigation Key
Use the directional keys on the Navigation key to browse menus,
sub menus, and lists. Press the Up or Down Navigation keys
when jumping to highlighted links on the web.
Understanding Your Phone
20
Section 3: Call Functions
This section describes how to make or answer a call. It also
includes the features and functionality associated with making or
answering a call.
•
To clear another digit in the number, press the Left or Right
Navigation key until the cursor is immediately to the right of the digit
to be cleared. Press
.
•
•
To enter a missing digit press the Left or Right Navigation key
until the cursor is in position and enter the digit.
Making a Call
When the Idle screen displays, enter the area code and phone
To clear the whole display, press and hold
.
number, and press the
key.
2. Press
to return to the Idle screen.
Note: When you activate the Auto Redial option in the Voice Call menu, the
phone will automatically redial up to 10 times when the person does
not answer the call or is already on the phone. (For more information,
Ending a Call
When you want to finish your call, briefly press
key.
Redialing the Last Number
Making an International Call
All incoming, outgoing and missed calls are listed in the Recent
Calls Menu. If the number or caller is listed in your Address
Book, the associated name displays.
1. Press and hold
2. Enter the country code, area code, and phone number,
then press
. The + character appears.
To access the Recent Calls menu:
.
1. From the Idle Screen, press
to display a list of the
Correcting an Entered Number
most recent numbers used in the order you dialed or
received them.
Use the following steps to correct a mis-typed entry when
dialing.
1. After entering a number
•
To clear the last digit displayed, press
.
21
2. Use the Left and Right Navigation keys to scroll through
the Recent Calls options. Choose from All Calls, Missed
Calls, Calls Made, or Calls Received.
Note: To reject an incoming call, press and hold either Volume key on the
right side of the phone. A quick press of a Volume key silences the
ringer on an incoming call.
2. End the call by pressing
.
3. Highlight the number you want, then press
to dial the
number.
Note: You can answer a call while using the Address Book or menu features.
After ending the call, the phone returns to the function screen you
were using.
Making a Call from the Address Book
You can store phone numbers that you use regularly on the SIM
card or in the phone’s memory. These entries are collectively
called the Address Book.
Video Share
The Video Share features allows you to place a call and share live
or recorded video while on the call. You can initiate or receive
video by using the following steps.
Once you have stored a number in the Address Book, you can
dial it by pressing a few keys using the Speed Dial feature.
Initiating and Receiving a Video Share Session
To initiate and receive a Video Share session:
Answering a Call
1. Dial the number and press
.
When a call is received the phone rings and displays the caller’s
phone number, or name if stored in the Address Book.
2. Once the call is answered, if you're both capable of Video
Sharing, a Video Share icon appears on the screen
1. From the Idle Screen press
.
(
) and the Mute soft key will
If the Any Key option in the Settings ➔ Calls ➔ General
change to say Video Share.
➔ Call Answer menu is activated, you can press any key
to answer a call except
and the Reject soft key.
Call Functions
22
3. Press the Video Share soft key to invite the other party to
see video shot from your phone. “Establishing a Video
Connection” displays. A message is sent to the recipient
“###-###-#### Wants to Share Video With You.”
:Select this option to adjust the
brightness for the video.
Brightness
Landscape: Select this option to rotate the picture
from Portrait to Landscape mode. Press any key to
revert to Portrait.
Important!: When establishing a Video connection, the first phone that
actually makes the connection becomes the sending phone.
Rotate: Select this icon to rotate from Portrait to
Landscape, when Video Share is selected from the
Camcorder options.
4. The recipient will receive a Video Share pop-up to either
Accept or Decline the Video Share call. They should
press the Accept soft key to continue or Decline soft key
the invitation.
Mute: Select this icon to turn the audio off.
5. A Recording Started pop-up displays showing the
Spkr Off/On: press this key to turn off/on the speaker.
memory available for the video.
6. During a Video Share session, the following functions are
displayed as icons on the screen. Use the Right and Left
Navigation key to select. When the function is selected, the
following options display above the right soft option key:
Tip: To stop the video share call press the Options soft key and press the
Select the “Video Share End” soft key.
7. A pop-up message displays “Video Sharing has been
Stopped. Save the Recorded Video?” If accepted, the
recorded videos are stored in the My Stuff ➔ Video folder.
Stop: Select this option to stop the video share
feature.
23
Video Share (In-Call)
Viewing All Calls
You can begin a Video Share call during an existing call by
pressing the Options soft key and selecting Video Share ➔ Live.
From the Recent Calls menu, select the All Calls option. All calls
made, received, and missed are listed. Press the Options soft
key for the following options:
Play a Video Share Recording
•
Details: allows you to see the number of the sender, the date and time
of the call, the length of the call, and the contact’s name, if listed in
your Contact List.
During a call (while not in a Live Video Share session) you can
share a recorded video for the recipient.
1. Press the Options key and select Video Share ➔
Recorded and then select from the available files in your
Videos folder.
•
•
Call Back: allows you to return the call automatically.
Video Share: allows you to set up a Video Share call with the caller, if
their handset is Video Share enabled.
•
•
Save to Address Book: allows you to save the number to your
Address Book on either the phone or SIM card.
2. To make the connection, the recipient should press Accept
and the Video begins to play on both phones.
Send Message: allows you to sent a Text or Multimedia message to
the caller.
Recent Calls
•
•
Delete: allows you to delete the selected call or All calls.
Add to Reject List: allows you to add the sending number to your
Reject List, where incoming calls are sent direct to voice mail.
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. You can access
this menu by:
ᮣ
Press the Menu soft key, then select My Stuff
Recent Calls
➔
Tools
➔
Viewing Missed Calls
.
The number of calls you have missed is displayed on the Idle
screen.
If the number or caller is listed in your Address Book, the
associated name is displayed.
To view the number details:
1. Press the View soft key. The most recently missed call is
displayed.
Call Functions
24
- Or -
Note: If there is a voicemail sent by the same number, associated icons are
displayed and can then be selected.
4. Highlight the number and press the
key.
2. To scroll through the list of missed calls, press the Up or
Saving a Missed Call to your Address Book
Down Navigation key.
To save the missed call entry to your address book, use the
following steps:
3. To move to another call type, press the Left or Right
1. Press the View soft key. A list of the most recently missed
Navigation key.
calls is displayed.
Viewing the Details of a Missed Calls
2. Select the desired missed call.
To view the details of a selected missed call, use the following
steps:
Note: You may see different choices depending upon the settings for your
1. Press the View soft key. A list of the most recently missed
“Save New Contacts to” option.
calls is displayed.
3. Press the Options soft key, then select Save to Address
2. Select the desired missed call.
3. Press the Options soft key, then select Details.
Calling Back a Missed Call
book.
4. Select the storage location of your Address Book entry:
•
Phone: This option allows you to save the missed number to your
Address Book stored on the phone.
To call back a missed call number:
•
SIM: This option allows you to save the missed number to your
Address Book stored on the SIM card. This location only stores the
Name, Phone Number, and Group association for the contact.
1. Press the View soft key. A list of the most recently missed
calls is displayed.
2. Highlight the desired missed call.
3. Press the Options soft key, then select Call Back.
25
Sending a Message to a Missed Call
1. Immediately after missing a call, press the View soft key.
2. Press the Options soft key, then select Delete.
3. Select which items will be deleted:
To send a text message or attachment to a missed call entry:
1. Immediately after missing a call, press the View soft key. A
list of missed calls is displayed with the most recently
missed call highlighted.
•
Selected: This option allows you to delete only selected call
entries.
•
All: This option allows you to delete all missed call entries.
2. Press the Options soft key, then select Send Message.
4. At the “Delete?” prompt, press either the Yes soft key to
3. At the “Create New Message” screen, use the
Alphanumeric keys to type in a message or press the
Options soft key to also Add Items such as an: Image,
Sound, or Video.
confirm the deletion or the No soft key to cancel.
Note: You can press the
key at any time to exit the Missed Call feature.
Call Time
4. When you are done with your message, press the Send To
1. From the Idle Screen, press the Menu soft key, then select
My Stuff ➔ Tools ➔ Recent Calls ➔ Call Time. The
following options are then available:
soft key.
5. At the “Recipients” screen, use the numeric keypad to
add additional contact phone numbers, if necessary.
•
•
•
Last Call Time: shows the length of time for the last call.
6. Press the Send soft key to initiate delivery.
Total Sent: shows the total length of time for the calls made.
Total Received: shows the total length of time for the calls
received.
Note: When you “Add items” in the options, the setting automatically
changes to “Multimedia Message”.
2. Select the desired option, press the Reset soft key.
Deleting a Missed Call
3. Enter the password and press the OK soft key to reset the
To delete a missed call entry:
selected option.
Call Functions
26
4. Press the Back soft key or the
key to cancel this
3. To set the counter back to zero, press the Reset soft key.
operation.
You will be prompted for a password.
4. Enter the password and press the OK soft key or the
Data Volume
key.
Data Volume refers to the amount of data (volume) to and from
the phone.
5. Press the Back soft key or press
to exit this display.
1. From the Idle Screen, press the Menu soft key, then select
My Stuff ➔ Tools ➔ Recent Calls ➔ Data Volume. The
following information displays:
Data Call Time
1. From the Idle Screen, press Menu soft key, then select My
Stuff ➔ Tools ➔ Recent Calls ➔ Data Call Time. The
following options are available:
•
•
•
•
Last Sent Data: shows the size of the last data packet (measured
in KB - kilobytes) sent by the phone since the last time this counter
was reset.
•
Last Data Call: shows the time used for the last data call sent or
received since the last time this counter was reset.
Last Received Data: shows the size of the last data packet
(measured in KB - kilobytes) received by the phone since the last
time this counter was reset.
•
Total Data Call: shows the total time used to send or receive data
since the last time this counter was reset.
Total Sent Data: shows the size of the total data packet
(measured in KB - kilobytes) which have been sent by the phone
since the last time this counter was reset.
2. Use the Up and Down Navigation keys to scroll through the
information.
3. To set the counter back to zero, press the Reset soft key.
Total Received Data: shows the size of the total data packet
(measured in KB - kilobytes) which have been received by the
phone since the last time this counter was reset.
You will be prompted for a password.
4. Enter the password and press the OK soft key or the
2. Use the Up and Down Navigation keys to scroll through the
key.
information.
5. Press the Back soft key or press
to exit.
27
1. While on a call, press the Options soft key, then select
Options During a Call
Hold.
Your phone provides a number of control functions that you can
use during a call.
2. Enter the new phone number you wish to dial or look it up
Adjusting the Call Volume
in the Address Book.
During a call, if you want to adjust the earpiece volume, use the
Volume keys on the right side of the phone.
3. Press
to dial the second number.
- or -
Press
to increase the volume level and press
to
4. Press the Options soft key, then select New Call. Once
decrease the volume level.
connected, both calls are displayed on the screen.
In Idle mode, you can also adjust the ringer volume using these
same keys.
Note: The caller currently on hold appears greyed-out onscreen.
Putting a Call on Hold
You can place the current call on hold whenever you want. You
can also make another call while you have a call in progress if
your network supports this service.
When you have an active call and a call on hold, you may switch
between the two calls, changing the one on hold to active and
placing the other on hold.
To put a call on hold:
To switch between the two calls:
1. While on a call, press Options soft key, then select Hold.
This action places the current caller on hold (which is
displayed onscreen as a greyed-out box).
1. Press Options soft key, then select Swap.
•
The current call (caller #2) is placed on hold and the previous call
on hold (caller #1) is then reactivated so that you can continue
conversing with that person.
2. You can later reactivate this call whenever you want by
2. Press
to end the currently active call.
pressing the Resume soft key.
To end a specific call:
To make a new call while you have a call in progress:
Call Functions
28
–
–
Notes: Allows you to access Notes.
1. Press the Options soft key, then select End.
Whisper Mode On/Off: Increases the microphone sensitivity level so
that you do not have to speak louder to be heard by the other party.
Used in quiet environments such as theaters, meetings, etc.
Mute Keypad Tone: Silences/mutes the key tones when on the call. To
turn this feature off (unmute the keypad), return to this option and
2. Select the call you wish to end.
•
•
•
Active Call: Only the currently active call is ended.
Held Call: Only the currently held call is ended.
–
–
All Calls: All current calls are ended and you are returned to the
Idle screen.
select Send Keypad Tone
.
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the
contacts you have selected. These DTMF tones are sent as a group.
The DTMF tones are the tones used in phones for tone dialling,
sounding when you press the number keys. This option is helpful for
entering a password or an account number when you call an
automated system, like a banking service.
3. Press the
key to end the remaining call.
In-Call Options
During a call, press the Mute soft key to mute the onboard
microphone.
Press the Options soft key to access the following:
Video Share: Initiates a video sharing session. Video can be Live or
Recorded.
•
End Call: Allows you to end the active call.
•
If you are in a call, you can place the active call on hold by
selecting the New Call option above and either dialing another
number or answering another incoming call. Once the second
call has been activated, the following options are available.
•
•
•
Hold: Places the current call on hold.
Address Book: Allows you to access your Address Book information.
New Call: Places the current call on hold and then allows you to enter
and dial another number.
•
Swap: Places the active call on hold and then re-activates the call on
hold.
•
•
Messaging: Allows you to create and send a new Text message or
Multimedia Message.
•
Join: Joins all of the calls you have established with your phone (both
active and on hold) into a multi-party call.
More
:
–
Calendar: Allows you to temporarily access your calendar while still
maintaining the active call.
When you want to finish, end each call normally by pressing the
key.
29
Using the Speakerphone During an Active Call
Example: You wish to say something to person in the room, but do not want
the person on the phone to hear you.
While in an active call, it is possible to enable the speakerphone
feature.
1. Dial the number and press
.
Note: If you are already in Video Share or you have a call on hold, you need to
select Mute/Unmute.
2. Once the call is answered, press
to activate the
speakerphone.
To switch the microphone off temporarily during a call:
1. Press the Mute soft key. The option is then replaced with
Unmute.
3. Use the Volume keys (located on the right side of your
phone) to adjust the volume.
2. Press the Unmute soft key to deactivate the Mute function
and reactivate the microphone.
Muting or Sending Keypad Tones
Searching for a Number in Address Book
These options allow you to turn the key tones off or on. If the
Mute Keypad Tone option is selected, it allows you to press keys
without hearing key tones during a call.
You can search for a number from the Address Book during a
call.
1. Press the Options soft key, then select Address Book.
2. Highlight the Address Book entry.
Note: To communicate with answering machines or computerized telephone
systems, the Send Keypad Tone option must be selected.
- or -
3. Enter the first few letters of the contact into the Search
field which then highlights the closest match in the
Address Book list.
Switching off the Microphone (Mute)
You can temporarily switch your phone’s microphone off, so that
the other person cannot hear you.
4. Press the View soft key.
Call Functions
30
supported by the network, all calls can be joined together. You
are notified of an incoming call by a call waiting tone.
Call Waiting
Note: The Join option combines all of the calls you have established with
your phone (both active and on hold).
The Call Waiting feature allows you to answer an incoming call
while you have a call in progress, if this service is supported by
the network, and you have set the Settings ➔ Calls ➔ Voice
Call ➔ Call Waiting Menu to Activated. You are notified of an
incoming call by a call waiting tone.
Swap places the current call on hold and then activates the previous
call.
1. Press
to answer the first incoming call.
2. Press
to answer the next incoming call. The first call
To answer a call while you have a call in progress:
is automatically put on hold.
1. Press
to answer the next incoming call, or press the
3. Join the first two callers by pressing the Options soft key,
Accept soft key. The first call is automatically put on hold.
then selecting Join.
2. To switch between the two calls, press Options soft key,
•
Join: combines your current set of callers into a single multi-party
call (both active and on hold).
then select Swap.
•
Swap: Places the current call on hold and then activates the
4. Press
to end the call.
previous call.
Silent Mode
To end a call on hold:
Silent mode is convenient when you wish to stop the phone from
making noise, in a theater, for example.
1. Press the Options soft key, then select End ➔ Held Call.
2. Press
to end the current active call.
In Idle mode, press and hold
“Silent Profile on” message appears on screen. Both the Silent
mode and Vibration icons are displayed on the screen.
until the phone vibrates, the
3-Way Calling (Multi-Party Calling)
The 3-Way or Multi-Party feature allows you to answer a series of
incoming calls and place them on hold. If this service is
31
In Silent mode, your phone’s speakers are muted. An incoming
call causes the phone to vibrate and light up, depending on the
settings of the Silent Phone Settings feature.
To exit and reactivate the previous sound settings, press and hold
again until “Normal Profile on” displays. The Silent mode
and Vibrate icons are no longer displayed.
Call Functions
32
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone. Some menu options are controlled by the SIM
provided by your service provider.
4. To scroll through these menus, press either the Up or
Down Navigation key or the Volume key (located on the
left side of your phone). Press the Select soft key, or the
key to make your selection.
Menu Navigation
Menus and sub-menus can be accessed by scrolling through
them using the Navigation keys or by using the shortcut keys.
5. To return to the previous menu level, press the Back soft
key, the
key.
6. To exit the menu without changing the settings, press the
Accessing a Menu Function by Scrolling
1. In Idle mode, press the Menu soft key to access Menu
mode.
key.
Using Shortcuts
2. Scroll using the Navigation keys to reach a main menu,
Settings, for example. Press the Select soft key or the
key to enter the menu.
Numbered menu items, such as menus, sub-menus, and options
can be quickly accessed by using their shortcut numbers. In
Menu mode, Main Menus can be accessed by pressing the
number keys (1 to 0) corresponding to their location on the
screen.
3. If the menu contains sub-menus, Sound Profile, for
example, you can access them by first highlighting the
option and then by pressing the Select soft key or the
key. If the menu you have selected contains further
options, repeat this step.
Example: Accessing the Language menu.
1. Press the Menu soft key.
2. Press the
key for Settings.
3. Press the
key for Phone
33
4. Press the
key for Language.
• Change: changes the currently selected shortcut and assigns
another shortcut to this field.
5. Press the
key to display the list of available
• Remove: removes the selected shortcut from this field.
languages.
• Remove All: removes all the shortcuts from the fields in this menu.
Menu Outline
On numbered shortcut lists, while the lists may be numbered
through 12, the option 10 is selected by pressing the key,
option 11 is selected by pressing the key, and option 12 is
- Or -
Press the
key to access the selected option.
selected by pressing the
key.
My Menu
The My Menu option is another way to access applications from
the idle mode without navigating through the main menu icons
and sub menus. There are twelve available shortcuts, eight
preassigned (YELLOWPAGES, AT&T Navigator, Bluetooth, Mobile
Email, Tools, Alarms, Calendar, and Recent Calls) and four empty
shortcuts (9-#) you can assign.
To navigate to My Menu shortcuts:
1. In Idle mode, press the Options soft key, and select a short
cut application.
2. Press the Options soft key and select one of the following:
• Open: open the selected shortcut and displays the submenus,
launches the selected application, or displays a screen.
Menu Navigation
34
Section 5: My Stuff
The topics covered in this section are Cellular Video, audio,
graphics, games, calendar, schedule events, set an alarm, and
perform simple math calculations.
•
Video Categories: provides some general content categories from
which to begin searching for media: TV to Go, Entertainment,
Sports, News & Weather, HBO Mobile, and Premium Channel.
•
•
Customize CV: allows you to access the CV Settings menu where
you can configure most of the settings associated with CV.
Cellular Video (CV)
Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access the Internet and
download media files directly to your phone. These media files
are displayed using the built-in Media Player. Cellular Video (CV)
is a media service which allows you to not only navigate to your
favorite web sites but stream media content (Weather, News/
Sports highlights, etc.) directly to your phone.
Parental Controls: provides you with settings which can be
configured to restrict certain media content from being displayed on
the phone.
•
•
MEdia Net: exits from the CV application and launches the MEdia
Net homepage.
Help: provides basic on-line assistance which answers most of the
common issues users come across while using this feature.
1. When the Idle screen displays, press the Menu soft key,
3. Highlight the desired media clip or select from one of the
available categories and press the Select soft key or the
key.
then select My Stuff ➔ CV.
2. Press the Select soft key or the
key. You are then
taken to your default CV homepage.
CV Options
This homepage provides you with several sections of
accessible content:
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ CV.
•
My Favorites: allows you to choose from some recently uploaded
video clips from among the following media providers: CNN, ESPN,
HBO Mobile Preview, or Access Hollywood.
2. From the main CV homepage, press the Options soft key
to use one of the following options:
35
•
Go: lets you navigate Forward (next sequenced web page) or
Backward (to the previously visited web page) through pages in
your browsing history.
•
•
History: displays the list of web pages you have recently accessed.
Advanced: allows you to change the following settings for the
browser.
•
•
Reload: reloads the current page with updated information.
–
–
–
Clear Cache: deletes the information stored in the cache. The cache
stores the most recently accessed pages.
Desktop View/Smart-Fit View: changes the display mode of the
browser.
Empty Cookies: delete cookies. Cookies are pieces of personal
information sent to a web server while navigating the web.
•
Page Size: change the page size of the displayed web page using
the Right and Left Navigation keys to step the size up or down
Cookie Options: sets whether or not cookies are stored on your phone.
If you select Prompt, the phone will ask you to save the cookies on
every page requiring cookies.
(there are 20 increments)
.
•
•
•
•
•
Go to Homepage: takes you back at any time to the homepage of
the Wireless Web service provider.
–
Preferences: changes the settings for the web browser to suit your
preference.
Add to Favorites: bookmarks the current page and marks it as a
favorite site.
–
–
–
Certificates: accesses certificate information from your phone.
Page Details: displays the properties for the currently active web page.
View Favorites: accesses and displays the bookmarks assigned
as favorite web pages.
About Browser: displays the access version and copyright information
about the browser.
Send URL via: send the URL of the current page via either a
message or to another party via a Bluetooth device.
Media Clip Options
Enter URL: allows you to manually enter the URL address of a WAP
site. After entering an address, press the Go to soft key to go there
directly.
With the media currently active on the phone (either playing or
paused), press the Options soft key to open a list of the following
streaming media options.
•
•
•
Copy URL to Message: send the URL of the current page to
another party as a message.
Tip: Within the clips listed in the My Favorites section of your main CV
homepage, highlight the description and then press the
begin the stream.
key to
Save: saves either the image of the current web page or the
current page itself.
Saved Pages: access the list of web pages you have saved.
My Stuff
36
Pause/Resume
CV Settings
This feature allows you to toggle the state of the current video
between being Paused or Resuming playback.
This feature allows you to configure the current server profile
Stop
Landscape
The feature stops the current media, exits the media player and
returns you to the main CV homepage.
This features rotates the streaming media clip to appear in a
landscape orientation. The default orientation is a portrait
orientation.
Jump to Track Time
This feature pauses the current media content and displays a
“Jump to track time” pop-up which allows you to enter an Hour,
Minute, and Second value which corresponds to the media’s
timeline. If, as an example, the content is three minutes long,
entering a value of: 00:01:30, would cause the Media Player to
begin replaying the content from its half-way point.
Properties
Displays a Media Player window which gives file specific
information such as title, and Duration.
Using the Video Categories
This grouping of media categories provides access to an
additional listing of streaming media. Where the previous
Favorites list of media stream can be user edited and updated,
this list of categories is defined by CV’s homepage and can not
be changed.
1. Use your keypad to enter a value for the Hour, Minute, and
Seconds.
2. Press the Jump soft key to cause the Media Player to
resume playback at that value on the clip’s timeline
- or -
Viewing a Video Clip
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ CV.
3. Press the Cancel soft key to go back to your media clip
and resume playback from its previous location.
2. Select the video clip from within the Favorites section.
37
Adding a Video Alert
3. After the stream has been buffered into memory, you can
choose to either Pause or play the content. Pressing the
key toggles the Play and Pause functionality.
When new media is available for upload to your phone (such as
breaking news), you can set your phone to notify you of the new
available content.
Customizing CV
Updating the Favorites List
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ CV.
The list of media providers which appear in the Favorites section
of the CV homepage can be edited and changed by the user.
2. Select the Customize CV button from the bottom of the
homepage.
1. When the Idle screen displays, press the Menu soft key,
3. From the Customize CV - Options listing, select My Video
then select My Stuff ➔ CV.
Alerts.
2. Select the Edit button from the upper-right of the
4. Navigate to the Add to My Alerts section of the page and
homepage (adjacent to the My Favorites title).
highlight one of the available services (ex: Breaking News).
3. From the Customize CV - Options listing, select Edit My
5. Press the Options soft key, then select Add to Favorites.
Favorites.
My Purchases
4. Navigate to the Add to Favorites section of the page and
highlight one the additional streaming media channels
which are not currently in your Favorites list (ex: Cartoon
Network).
The CV homepage can be used to shop for streaming multimedia
content. The My Purchases section can help keep track of your
purchase history and view any new resale products.
1. When the Idle screen displays, press the Menu soft key,
5. Press the Options soft key, then select Add to Favorites.
then select My Stuff ➔ CV.
My Stuff
38
2. Select the Customize CV button from the bottom of the
2. Select the Customize CV button from the bottom of the
homepage.
homepage.
3. From the Customize CV - Options listing, select My
Purchases ➔ Purchase History. This provides you with
an on screen listing of your “to date” purchase history for
media content.
3. From the Customize CV - Options listing, select Parental
Controls.
4. Select the OK button to access the MEdia Net parental
setup fields.
4. Select My Account. This provides you with an on screen
5. From the Parental Control Setup screen, use your keypad to
enter information into the following fields: PIN, Re-enter
PIN, contact email address.
description of your account details.
Parental Controls
6. Select the Save button. Allow a few minutes for your
information to be received and accepted by MEdia Net. You
can then use this information to activate the parental
filters.
Your phone can be configured to block both purchased and
streamed media content. Before filtering, you must first establish
a pin/password and a contact e-mail address. Once those have
been established, you can the two available filter options:
Content Filters and Purchase Blocker.
Configuring the Filters
•
Content Filters: let you restrict access to inappropriate content both
on and outside of MEdia Net.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ CV.
•
Purchase Blocker: lets you restrict the ability to buy ringtones,
downloads, games, etc., from this phone.
2. Select the Customize CV button from the bottom of the
Setting up Parental Control
homepage.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ CV.
3. Select the OK button.
39
4. When prompted, enter the PIN and e-mail address which
2. Select My Stuff ➔ Audio ➔ Tones. A menu displays giving
you the option to shop for tones or use the ones that are
preloaded in your phone.
was registered with MEdia Net in the previous section.
5. Select Content Filters.
3. Highlight the Shop Tones menu option to launch the WAP
browser and select a file to download. Follow the on-
screen options. These files are downloaded and stored in
the Tones folder.
6. Select the On button to toggle the On/Off state.
7. Select Purchase Blocker.
8. Select the On button to toggle the On/Off state.
9. Press the Back soft key or press
. This activates the
4. From the Audio ➔ Tones menu, select from pre-loaded or
filter.
downloaded ringtones on your phone.
Audio
5. Highlight an available entry, press the Options soft key and
select Set as to save the selected ringtone as one of the
following:
The Audio menu option allows you to shop tones, answer tones,
and music using the WAP browser. You can also access audio
that has been previously recorded on your phone.
• Call Ringtone: Allows you choose Normal, Driving, or Outdoor
profile.
Tones
You can shop, download, and save to your Downloaded
Ringtones folder. To access the Audio menu option, use the
following steps:
• Caller Ringtone: Allows you to assign a ringtone to someone in
your Contacts List or Add New Contact.
• Alarm Tone: allows you to assign the tone to an alarm.
1. In Idle mode, press the Menu soft key to access Menu
6. Once you have chosen from one of the above options,
mode.
press the Select soft key or the
key.
A confirmation screen will pop up to let you know that you
change has been made.
My Stuff
40
Answer Tones
3. Follow the on-screen options.
You can shop and download Answer Tones, manage your Answer
Tones, and access Help files. To access the Answer Tones menu
option, use the following steps:
Recorded Audio
This menu shows a list of saved voice memos. When a voice
memo is recorded and saved, it is stored in the Recorded Audio
folder. To access this menu use the following steps:
1. In Idle mode, press the Menu soft key to access Menu
mode.
1. In Idle mode, press the Menu soft key to access menu
2. Select My Stuff ➔ Audio ➔ Answer Tones. The following
mode.
options display:
2. Select My Stuff ➔ Audio ➔ Recorded Audio and press
• Shop Answer Tones: Launches the WAP browser. Select a
file to download and follow the on-screen options.
• Manage Answer Tones: Launches the WAP browser. You can
assign Answer Tones to Callers and Groups, turn your
greeting on or off, and shop for more Answer Tones.
• About Answer Tones: Launches the WAP browser. You can
navigate through the frequently asked questions
regarding Answer Tones.
the Select soft key or the
key.
3. Use the Up or Down Navigation key to select a recorded
memo.
4. A list of voice memos displays. To play a recording, press
the
soft key.
5. To exit, press the Back soft key or the
key.
Music
Games and Apps
This menu allows you to shop for music using the WAP browser.
1. In Idle mode, press the Menu soft key to access Menu
mode.
The Games and Apps menu option allows you to shop games and
applications using the WAP browser. You can download new, and
save to the Games and Apps folder. To access the Games and
Apps menu option, use the following steps:
2. Select My Stuff ➔ Audio ➔ Music ➔ Shop Music to
launch the WAP browser
1. In Idle mode, press the Menu soft key to access Menu
41
mode.
Note: Service charges and subscription purchase may be required.
2. Select My Stuff ➔ Games & Apps. The following options
3. To access a pre-installed game, highlight Games & Apps
appear in the display:
and press the
key.
key. Select a game and press the
•
•
•
•
•
•
•
•
•
•
•
Shop Games
Shop Applications
ES Musica
Mobile Banking
Mobile Pix Trial
MobiTV
Univision Movil
Wiki Mobile
Platinum Sudoku DEMO
Tetris
Shop Applications
1. In Idle mode, press the Menu soft key to access Menu
mode.
1. Select My Stuff ➔ Games & Apps ➔ Shop
Applications.
ZUMA Demo
2. Use the Up or Down Navigation key to select from the list of
Shop Games
1. In Idle mode, press the Menu soft key to access Menu
options.
mode.
information on downloading applications.
2. Select My Stuff ➔ Games & Apps ➔ Shop Games to
launch the WAP browser and select a file to download.
Follow the on-screen options. The downloaded files will be
stored in the Games & Apps folder.
Graphics
The Graphics menu option allows you to shop graphics using the
WAP browser. You can download new, and save to your
Downloaded Graphics folder. To access the Graphics menu
option, use the following steps:
My Stuff
42
1. In Idle mode, press the Menu soft key to access Menu.
•
•
•
Take photo: allows you to go back to the camera and take another
photo.
2. Select My Stuff ➔ Graphics.
Create Folder: allows you to create a new folder and then populate it
with either Selected or Multiple graphics from the list.
More: gives you the following options:
If you enter the Graphics folder through menu options, and press
the Options soft key before selecting an existing graphic, the
following options list:
–
–
–
–
–
Lock/Unlock: allows you to lock/unlock the photo. Lock prevents the
photo from being deleted, unlock releases it so that it can be deleted.
Bluetooth Visibility: allows you to select either Selected or Multiple
graphics visibility to Bluetooth devices.
Sort by: allows you to sort the list of graphics by either: Date, Type,
Name, or Size.
Print via: allows you to make a selected graphic printable by either USB
or Bluetooth printer.
Properties: allows you to view the properties of a photo.
•
•
•
Download: launches the WAP browser.
Take Photo: allows you to go back to the camera and take a picture.
Create Folder: allows you to create subfolders under the Graphics
folder in which to store pictures that you take.
If you select a graphic but do not press the
options are available:
key, the following
•
•
View: allows you to view the photo.
Send: allows you to attach the graphic to a message, send it to a
®
Shop Graphics
Bluetooth device, or send to HP’s Snapfish
.
1. In Idle mode, press the Menu soft key to access Menu
Select My Stuff ➔ Graphics ➔ Shop Graphics and press
•
Set as: allows you to set the currently selected graphic to be the
display Wallpaper, or you can assign the graphic to a Caller ID.
Delete: allows you to delete either Selected or Multiple graphics.
Rename: allows you to rename the selected graphic.
Move: allows you to move either a Selected or Multiple graphics to one
of the My Stuff (Phone) folders.
•
•
•
the Select soft key or the
key to launch the WAP
browser and select a file to download.
2. Follow the on-screen options. These files are downloaded
and stored in the Graphics folder.
•
Copy: allows you to make a copy of the Selected or Multiple graphics
and then send it to one of the My Stuff (Phone) folders.
43
–
–
–
–
Insert: allows you to add Frames
the image.
Send allows you to send the photo via Message, via Bluetooth
or to HP’s Snapfish
Set as: allows you to assign the current image file as either a
Wallpaper or Caller ID
,
Cliparts, Emoticon, and Text to
Access Photos
1. To access the photos you have taken with your phone,
:
,
select My Stuff ➔ Graphics and press the
key.
.
2. Highlight a photo from the list and press the
key. The
.
image is loaded onto your screen.
Print via: allows you to make a selected graphic printable by either
USB or Bluetooth printer.
3. Press the Options soft key. The following options appear:
• More: gives you the following options:
• Zoom: allows you to zoom in or zoom out on the photo.
• Send: allows you to send the photo via either Bluetooth
,
–
Slide Show: allows you to view the My Photos folder images as a slide
show.
Multimedia Message (MMS) or to an HP’s Snapfish
.
• Set as: allows you to assign the current image file as either a
Wallpaper or Caller ID (where the photo is assigned to a selected
contact for their Caller ID).
–
–
Lock: allows you to lock the photo and prevent deletion.
Bluetooth Visibility: allows you to select the graphics visibility to
Bluetooth devices.
• Delete: deletes the file.
–
–
Print via: allows you to make a selected graphic printable by either USB
or Bluetooth printer.
• Rename: allows you to rename the photo.
• Edit: gives you the following options:
Properties: shows the Size, Format, Resolution, Forwarding, Created
(Date, Time), Location.
–
–
Save as: allows you to name the picture.
Effects: allows you to chose Black and White
Milky Lighting Crayon Pastel Oil Paint Blur
Sharpen
Partial Effects: allows you to choose Partial Blur or Redeye Repair
Adjust: allows you to adjust Brightness Contrast, and Color
Transform: allows you to Resize Rotate, and Flip the image.
Crop: allows you to crop the image.
4. To access pre-loaded wallpaper options for your phone,
,
Sepia
,
Negative,
highlight one from the list and press the
image is loaded onto your screen.
key. The
,
,
,
,
,
Despeckle,
.
–
–
–
–
.
5. Press the Select soft key, then Set as
press the
➔
Wallpaper and
,
.
key to set the wallpaper selection.
,
My Stuff
44
Videos
Camera
This menu allows you shop for videos and to set up folders to
save your videos using the WAP browser.
Taking Photos
Note: When taking a photo in direct sunlight or in bright conditions, shadows may
appear on the photo.
1. In Idle mode, press the Menu soft key to access Menu
mode.
1. In Idle mode, press the Menu soft key to access Menu
2. Select My Stuff ➔ Videos
.
mode.
3. Highlight Shop Videos and press the Options soft key. The
2. Select My Stuff ➔ Tools ➔ Camera and press the Select
following options appear:
soft key or the
3. Press the
key.
• Download: allows you to download videos from your browser.
• Record Video: opens the camcorder.
key to take the photo.
• Create Folder: allows you to made a new folder for your videos.
4. Press the Select soft key to make choose your option.
Note: Your camera produces photos in JPEG format.
Tools
4. Or before taking the photo, press the Right soft key to
The Tools folder provides access to and allows you to use the
Camera, Record Audio files, set Alarms, use the Calendar and
features, view Recent Calls, create Tasks, create Notes, use the
Calculator, use the Tip Calculator, use the Converter (for currency,
length, weight and volume), view World Time, set the Timer, and
use the Stopwatch.
access camera options.
Record Audio
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time is limited to free memory
space available.
45
You can access the Recent Calls menu by selecting My Stuff ➔
Tools ➔ Recent Calls and pressing the Select soft key or the
key.
Alarms
This feature allows you to:
•
•
set the alarm to ring at a specific time.
set the phone to switch on automatically and ring the alarm even if the
phone is switched off.
Tasks
You can access the Alarms menu by selecting My Stuff ➔ Tools
This menu option allows you to create a “to do” entry of tasks
which are created in a similar fashion to previously described
Calendar entries.
➔ Alarms and pressing the Select soft key or the
Calendar
key.
You can access the Tasks menu by selecting My Stuff ➔ Tools
Tasks and pressing the Select soft key or the key.
➔
The calendar feature allows you to view the Month, Week, and
Day layout views. You can also create an Appointment,
Anniversary, Holiday, Important, or Private entries. It also shows
any Missed Alarm Events that have occurred.
Notes
This option allows you to create notes and add them to your
events.
You can access the Calendar menu by selecting My Stuff ➔
Tools ➔ Calendar and pressing the Select soft key or the
key.
You can access the Notes menu by selecting My Stuff ➔ Tools
➔
Notes and pressing the Select soft key or the
key.
Recent Calls
Calculator
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. If the number or
caller is listed in your Address Book, the associated name is
displayed.
This option allows you to use your phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division.
My Stuff
46
You can access the Calculator menu by selecting My Stuff ➔
Tools ➔ Calculator and pressing the Select soft key or the
key.
You can access the Converter menu by selecting My Stuff ➔
Tools ➔ Converter and pressing the Select soft key or the
key.
Tip Calculator
World Time
This option allows you to use the phone to calculate the amount
of money left as a tip based on parameters such as: total bill
amount, tip percentage, and number of members in your party.
World Time allows you to view the time of day or night in another
parts of the world. World displays time in the 30 different time
zones around the world.
You can access the Tip Calculator menu by selection My Stuff ➔
Tools ➔ Tip Calculator and pressing the Select soft key or the
key.
You can access the World Time menu by selection My Stuff ➔
Tools ➔ World Time and pressing the Select soft key or the
key.
Timer
Converter
The Converter menu provides the following conversion
categories:
This feature allows you to set a countdown timer.
You can access the Timer menu by selecting My Stuff ➔ Tools
Timer and pressing the Select soft key or the key.
➔
•
•
•
•
•
•
Currency
Length
Weight
Stopwatch
Volume
Area
This feature allows you can to measure intervals of time for four
separate times. To enable the Stopwatch, do the following:
Temperature
47
You can access the Stopwatch menu by selecting My Stuff ➔
Tools ➔ Stopwatch and pressing the Select soft key or the
key.
3. Press the Go Right soft key.
4. Highlight Drive To and press the Right Navigation key.
5. Select one of the following and enter the required
information:
AT&T GPS
• Drive To
:
AT&T GPS is an audible and visual, JAVA based driving aid that
uses GPS navigation.
–
–
–
–
–
–
My Favorites: displays your favorite (marked) GPS navigation sites.
Recent Places: displays the places for which you recently navigated.
Address: allows you to type or speak an address for navigation.
Intersection: allows you to type or speak an intersection for navigation.
City: allows you to enter a city, State and/or Province for navigation.
The program is a separately licensed product that requires you to
download the feature to your handset, and accept the license
agreement before using. A trial period is provided for you to test
it for your own use.
Businesses: allows you to enter a business type or name, category, or
GPS
location.
1. In Idle mode, press Options ➔ AT&T Navigator, and press
–
Airports: allows you to enter the 3-letter airport code or name.
• Search: allows you to search for the address or location for a
the Select soft key or the
key.
destination.
2. A 30-day free trial period is provided with a notice that if
you do not cancel within 30 days then you are charged for
the GPS service.
• Maps and Traffic allows you to view maps and traffic reports.
:
• Tools & Extras: allows you to search, refresh and view Favorites,
displays Preferences, and provides detailed information about the
phone.
Important!: After the trial period, charges for GPS service apply. Contact your
–
My Favorites: allows you to search your saved favorites, create a new
favorite, refresh favorites, or view the received address.
AT&T service provider for details.
–
Preferences: displays and allows you to edit the following: Name/
Phone number, Route Type, Distance Units, Moving Maps, Audio
Options, and Guide Tones.
The application begins launching and then a warning not to
manipulate the application while driving displays.
My Stuff
48
–
About: provides Details, Support Info, Your PIN Number, Give Feedback,
and Terms and Conditions options.
• Eventful Events: allows you to search for in Music, Performing
Arts, Sports, Single, Social, Food, Cuisine, Wine, and Family Fun
categories.
• Gas Buddy: allows you research gas pricing in your area.
• AccuWeather: allows you to check the local weather.
6. Press the
key to return to Idle mode.
Note: These services require the purchase of a subscription.
3. Press the Select soft key to choose your option.
Where
Note: These services require the purchase of a subscription.
1. In Idle mode, press Menu ➔ My Stuff ➔ AT&T GPS ➔
Where, and press the Select soft key or the
key.
Other Files
A three-day free trial period is provided with a notice that if
you do not cancel within three days then you are charged
for the GPS service.
The Other Files menu options allows you to create folders to store
your “stuff.”
You can access the Other Files menu by selecting My Stuff ➔
Other Files and pressing the Select soft key or the
key.
Important!: After the trial period, charges for Where service apply. Contact
Used Space
your service provider for details.
The Used Space menu option allows you to view the usage and
available memory for Audio, Games & Apps, Graphics, Videos,
and Other Files. To access the Used Space option, use the
following steps:
2. Press the
key. The following menu options appear in
the display:
• add free widgets: allows you to download and manage your
widgets.
1. In Idle mode, press the Menu soft key to access Menu
• Starbucks: allows you to locate the nearest Starbucks.
• Yelp: allows you to search for the address, phone numbers, and
reviews of restaurants, shopping, arts and entertainment, and
hotels and travel.
mode.
49
2. Select My Stuff ➔ Used Space menu option and choose
from Audio Games and Apps Graphics Videos, or Other
Files
,
,
,
.
3. Press the Back soft key to return to the Used Space
menu.
My Stuff
50
Section 6: Entering Text
This section outlines how to select the desired text input mode
when entering characters into your phone. This section also
describes how to use the T9 predictive text entry system to
reduce the amount of key strokes associated with entering text.
keystrokes you make with an internal linguistic dictionary to
determine the most likely word, thus requiring far fewer
keystrokes than the traditional Alphabetic mode. The T9 abc
method makes all characters lowercase. The T9 Abc method
makes the initial character an uppercase while the remaining
characters are left as lowercase. The T9 ABC method makes all
characters uppercase.
Using the Text Input Methods
The Text Input option switches the key entry functions from ABC
(Alphabetic), T9 Alphabetic (predictive text mode), Numeric
Mode, and Symbols Mode.
Numeric
This mode allows you to enter numbers.
ABC (Alphabetic) Input Method (abc, Abc, and ABC)
Symbols
This input method allows you to enter letters by pressing the key
labeled with the letter you want. Press the key once, twice, three,
or four times until the desired letter displays.
This mode allows you to enter symbols, such as punctuation
marks.
The abc method makes all characters of the word lowercase. The
Abc method makes the initial character an uppercase while the
remaining characters are left as lowercase. The ABC method
makes all characters of the word uppercase.
Changing the Text
Input Mode
When you are in a field
that allows characters
to be entered (such as
in a text message), you
will notice the text input
mode indicator on the
display.
T9 Input Method (T9 abc, T9 Abc, and T9 ABC)
This input method allows you to enter words with only one
keystroke per letter. Each key on the keypad has more than one
letter; for example, pressing the
However, the T9 method automatically compares the series of
51
key can enter J, K, or L.
To change the text input mode, use the following steps:
Enter a Word in T9 Mode
1. To toggle the text input mode between T9 mode and ABC
1. In T9 method, begin entering a word by pressing the 2 to 9
keys. Press each key only once for each letter. The built-in
dictionary lists words that match the keystrokes you have
entered.
mode, press and hold the
key.
2. To toggle from All Caps to Initial Caps, to Lower Case, or to
Numeric entries while in either the T9 Mode or the ABC
Mode, short press the
3. To go into Symbols mode, press and hold the
exit Symbols Mode, press either the Cancel soft key, the
OK soft key, or the key.
key.
2. Example: To enter “Hello”, press
key. To
,
,
,
,
The word that you are typing appears in the display. It may
change with each key that you press.
Note: You can also change the text input mode by pressing the Options soft
key and selecting Input Method, then choosing your preferred text
input mode from the pop-up list.
3. Enter the whole word before editing or deleting the
keystrokes.
4. When the word displays correctly, go to step 5.
Using the T9 Input Method
T9 Predictive Text input method is based on a built-in dictionary.
A series of keystrokes is interpreted by the phone using this
dictionary to determine the likely word.
If the word doesn’t display correctly, press the
key to
display alternative word choices for the keys that you have
pressed.
Example: Both “Of” and “Me” have the
and
keys. The phone
displays the most commonly used choice first.
5. Insert a space by pressing
and start entering the
next word.
Entering Text
52
Add a New Word into the T9 Dictionary
1. After pressing the keys corresponding to the word you
Add Words Not in the T9 Dictionary to Text
1. In T9 mode, press the Options
soft key.
want to add, press the
words.
key to display the alternative
2. Select Input Method
➔
Add
2. When the last alternative word is displayed, Spell displays.
word. The Add word pop-up
appears in the display, and the
text input mode temporarily
changes from T9 mode to ABC
mode.
Press the Spell soft key.
3. Enter the word you want to add using the ABC mode.
4. Press the Add soft key or press
.
The word is added to the T9 dictionary and becomes the
first word for the associated keypress series.
3. Enter the word you want to add using ABC mode.
4. Press the Add soft key or press
closes, your Add word entry appears in your text, and you
return to T9 mode.
. The Add word pop-up
Note: This feature may not be available for some languages.
•
To enter periods, hyphens, colons, or parenthesis, press and hold the
Using the Alphabetic Input Method
key.
T9 mode applies grammar rules to ensure that correct punctuation is
used.
To use the ABC Alphabetic input method use the
keys to enter your text.
to
•
•
To shift case in T9 mode, use the
capital, Capital lock, Lower case, and Numeric.
key. There are 4 cases: Initial
1. Press the key labeled with the letter you want:
•
•
•
Once for the first letter
Twice for the second letter
And so on
You can move the cursor by using the Left and Right soft keys. To
delete letters, press the
clear the display.
key. Press and hold the
key to
53
2. Select the other letters in the same way.
Using the Symbols Input Method
The Symbol input method enables you to insert symbols and
punctuation marks into text.
Note: The cursor moves to the right when you press a different key. When
entering the same letter twice or a different letter on the same key, just
wait for a few seconds for the cursor to move to the right
automatically, and then select the next letter.
1. To enter symbol mode press and hold the
key.
2. Use the Navigation keys to select an on screen symbol
Keys
group.
. , ’ - ? ! @ : / 1
3. To select a symbol from that group, press the
corresponding number key.
A B C Ä Å Æ Ç 2 a b
c ä à å æ ç 2
4. To clear the symbol(s), press the
key. When the input
D E F É ∆ Φ 3 d e f è é Φ 3
G H I Γ 4 g h i ì Γ 4
field is empty, this key returns the display to the previous
mode.
5. To return to your message, press the OK soft key or press
J K L Λ 5 j k l Λ 5
.
M N O Ñ Ö Ø Ω 6 m n o ñ ö ò ø Ω 6
Using the Numeric Input Method
The Numeric mode enables you to enter numbers into a text
message. Press the keys corresponding to the digits you want to
enter.
P Q R S П Σ Ψ 7 p q r s β Σ Ψ 7
T U V Ü θ 8 t u v ü ù 8
W X Y Z Ξ 9 w x y z Ξ 9
+ = < > € £ $ % & ¥ ¤ 0
Entering Text
54
Section 7: Understanding Your Address Book
This section allows you to manage your daily contacts by storing
their name and number in your Address Book. Address Book
entries can be sorted by name, entry, or group.
locations are physically separate but are used as a single entity,
called the Address Book.
Depending on your particular SIM card, the maximum number of
phone numbers the SIM card can store and how they are stored
may differ.
Note: When storing an Address Book entry into your SIM card, note that only
the Name, Address, Group, and slot location are initially offered as
fields. You may add additional fields to a SIM entry; however, if you
move that SIM card to another model phone, it is possible that only the
basic information will be visible.
1. When the Idle screen displays, press the Menu soft key,
then select Address Book ➔ Contacts.
2. Enter the first few letters of the name.
Using Contacts
The Address Book entries are then listed, starting with the
first entry matching your input.
Dialing a Number from Address Book
Once you have stored phone numbers in the Address Book, you
can dial them easily and quickly by either using their SIM card
location number or by using the Search field to locate the entry.
3. To select a different entry, press the Up or Down
Navigation key until the entry you want is highlighted.
4. Once you have found the entry, press
to dial the
Note: The default Address Book entries are: *Now - *669,
Check Bill Balance - *225#, Directory Assistance - 411,
Pay My Bill - *729, View Data Usage - *3282#,
View My Minutes - *646#, Voice Dial - *08, and
Music ID - #43.
number, or press the Options soft key to access the
Address Book entry options.
Address Book Entry Options
While in the Address Book with any of the default entries
highlighted, press the Options soft key to use access the
following options:
Finding an Address Book Entry
You can store phone numbers and their corresponding names
onto your SIM card and phone’s onboard memory. The two
55
–
–
SIM Management: allows you to copy contacts to the SIM card, copy
contacts from the SIM card, or delete contacts from the SIM card.
Print via Bluetooth: allows you send the selected contact entry
information to a Bluetooth compatible printer.
•
•
View: provides you with details about that contact entry. Press the
Back soft key to return to the Address Book listing.
Video Share: allows you to share either a live video recording or
recorded video with a phone that is similarly equipped, and if both
SIMs have the feature enabled.
Adding a New Contact
•
•
Call: allows you to call a currently selected entry.
Use the following procedure to store a new contact to your
Address Book. There are two starting methods: one, starting from
the Address Book and adding a new contact; and the second,
starting from the Idle screen and typing in the number. This
procedure uses the second starting method.
Add New Contact allows you to add a new entry to either your Phone
:
or SIM card.
•
•
•
Send Message
message to the selected entry.
Edit allows you to edit the properties of an entry such as: Name,
Category, Group, or location. Press the key to save your changes.
:
allows you to send a text message or a multimedia
:
1. When the Idle screen displays, enter the phone number.
2. Press the Options soft key, then select Save to Address
Delete: allows you to delete either a selected address book entry or
multiple entries from a target location such as the Phone and/or SIM
card.
Book.
3. Select the type of entry, either a New contact or Update to
•
•
Send Business Card via: allows you to send a message to the
selected entry which contains the information from an Address Book
Business Card entry which you have on file.
an existing contact.
4. On the Select Type screen, choose the type of phone
number being entered:
This can be sent as either a message or via Bluetooth.
More: allows you to access the following additional options:
•
•
•
•
•
Mobile - Private
Mobile - Business
Landline - Private
Landline - Business
Fax
–
–
Assign Speed Dial: allows you to set the speed dial key for this entry.
Add to Reject List: allows you to add the selected contact to the Reject
List so that calls from this contact are rejected.
–
Copy to FDN Contacts: allows you to copy the selected contact to the
FDN Contact list.
Understanding Your Address Book
56
•
Etc.
•
•
Instant Messaging: allows you to assign an Instant Message
profile to this entry. Press the key to access the IM menu.
5. On the Add New Contact screen, enter alphanumeric
Note: allows you enter notes associated with this contact.
characters into each of the available fields:
6. Press Options
➔
Save or press
to save the information
•
•
•
First Name: allows you enter a first name for this entry.
for this entry.
Last Name: allows you enter a Last name for this entry.
Display Name: allows you enter a display name for this entry
which then appears when you receive a call from this contact.
Note: By default, Contacts are saved on the phone. To copy them to a SIM
•
•
Phone Number: allows you keep or alter the currently entered
phone number.
Speed Dial List
Number Type: allows you to enter an additional Landline-Private
number to this entry. Select Options
the Number Type
➔
Change Type to change
Note: All contacts to be assigned to a speed dial number must already exist
in the Address Book.
.
•
•
Contact E-mail: allows you to enter a contact E-mail address for
You can assign up to 8-speed dial entries on the Speed Dial List
and then dial them easily whenever you want, simply by pressing
and holding the associated numeric key.
this entry.
Group: allows you to assign this contact to group. Press the
Options soft key to display available groups. Use the Up or Down
Navigation keys to select a group. Press the Select soft key or the
key to save your selection.
In Idle mode, to speed dial the numbers assigned to keys 2 to 9,
press and hold the appropriate key.
•
•
Caller ID: allows you to set a graphic to the Caller ID for this
You can set up Speed Dial entries two ways: by going to a
previously entered contact in the Address Book and assigning
them a Speed Dial number or by going to Address Book ➔
Speed Dial List and assigning a Contacts entry or FDN list entry
to a Speed Dial number.
contact. Press the Options soft key or the
key to access the
My Stuff menu.
Ringtone: allows you to choose a ringtone for this contact
information. Press the Options soft key or the
the My Stuff menu.
key to access
57
Setting Up Speed Dial Entries
1. From the Idle Screen, press Menu soft key, then select
Address Book ➔ Contacts.
Assigning an FDN List entry to a Speed Dial number is similar to
assigning a contact using the Speed Dial List. At the Speed Dial
List, however, highlight the desired speed-dial key, press the
Options soft key, and select Add
the FDN list entry you wish to assign to the highlighted speed-
dial key and press the Select soft key or the key.
➔
FDN Contacts. Next, highlight
2. Highlight the desired Contacts entry.
3. Press the Options soft key and select More ➔ Assign
Changing a Contact Assigned to a Speed-Dial Key
1. From the Idle Screen, press Menu soft key, then select
Address Book ➔ Contacts.
Speed Dial.
4. Select the key to which you wish to assign the speed-dial
number (from the 2 to 9 keys).
2. Highlight the contact to be assigned to a speed dial
The “Speed Dial assigned” message appears.
number, and press the Options soft key.
Note: Memory location 1 is reserved for your Voice mail server number.
3. Select More ➔ Assign Speed Dial. The “Change Speed
Dial?” confirmation appears.
You may also set up a Speed Dial entry by going to the Speed
Dial List directly.
4. Press the Yes soft key. The Speed Dial list appears.
1. From the Idle Screen, press Menu soft key, then select
5. Select the key to which you wish to assign the speed-dial
number (from the 2 to 9 keys). The “Saved” message
appears.
Address Book ➔ Speed Dial List.
2. Select the key to which you wish to assign the speed-dial
number (from the 2 to 9 keys). The Address Book list
appears.
If you access the Speed Dial List from the Address Book menu,
the procedure changes slightly:
1. From the Idle Screen, press Menu soft key, then select
3. Select the contact you wish to assign to this speed-dial
Address Book ➔ Speed Dial List.
number.
Understanding Your Address Book
58
2. Highlight the Speed Dial number that you would like to
4. When you are finished, press
to return to Idle mode.
change, and press the Options soft key.
Finding My Own Phone Number
3. Select Change, then select either Address Book or FDN
This function is a memory aid, which you can use to check your
own phone number if you need to do so.
Contacts.
You can assign a name to each of your own phone numbers
registered on your SIM card. You can also edit the names and
numbers. Any changes made here do not in any way affect the
actual subscriber numbers on your SIM card.
4. Using the navigation keys, highlight the contact to assign
to the Speed Dial number and press Select soft key or the
key.
The “Change Speed Dial?” confirmation appears.
1. When the Idle screen displays, press the Menu soft key,
then select Settings ➔ Phone.
5. Press the Yes soft key to save the new speed dial entry
and overwrite the previous information.
FDN Mode
FDN (Fixed Dialing Number) mode, if supported by your SIM card,
restricts your outgoing calls to a limited set of phone numbers.
When this feature is enabled, you can make calls only to phone
numbers stored in the FDN list on the SIM card.
The “Changed” confirmation displays.
6. When you are finished, press
to return to Idle mode.
Deleting Speed Dial Entries
1. From the Idle Screen, press Menu soft key, then select
Note: FDN Mode must be set to On in the Menu ➔ Settings ➔ Phone ➔
Security ➔ Set FDN Mode option before you can add, change, or
delete contacts on the FDN List.
Address Book ➔ Speed Dial List.
2. Highlight the key you wish to clear and press the Options
1. When the Idle screen displays, press the Menu soft key,
then select Address Book ➔ Address Book Settings ➔
FDN Contacts.
soft key.
3. Select Remove and press the Yes soft key to confirm your
deletion.
59
2. The FDN List screen displays. If there are no FDN numbers
assigned, press the Add New soft key to add an FDN
Contact.
3. Press the Options soft key, then select Group Settings.
The following options are then available:
•
•
Picture: allows you to view the assigned group image.
Ringtone: allows you to assign a ringtone for this group
from the Tones already on your phone or select Shop Tones
.
Choose
.
3. You must enter your PIN2 password. This number is
provided to you by your Service Provider.
4. Once you’ve made your changes, press the Options soft
4. Select the FDN Contact to call, or press the Options soft
key to add additional contacts, change a contact, or delete
a contact from the FDN List.
key, then select Save.
5. When you are finished, press
to return to Idle mode.
Managing Address Book Entries
You can copy, delete, and view the memory status for the Phone
and SIM entries on your phone.
Copy to FDN Contacts
1. Highlight an entry in the Address Book, and select the
Copy to FDN Contacts option.
Copying an Entry to the SIM Card
2. You must enter your PIN2 password. This number is
Note: When storing an Address Book entry into the SIM card, note that only
the Name, Phone Number, Group, and Slot location are initially
displayed. To save additional information for a particular contact, such
as other phone numbers, or e-mail, it is important to add new fields to
that Contact information. It is also important to note that if you move
the SIM card to another phone that does not support additional fields
on the SIM card, this additional information may not be available.
provided to you by your Service Provider.
Group Settings
Editing a Caller Group
1. When the Idle screen displays, press the Menu soft key,
then select Address Book ➔ Group.
1. When the Idle screen displays, press the Menu soft key,
then select Address Book ➔ SIM Management ➔ Copy
Contacts to SIM. An Address Book list appears.
2. Highlight the target group entry.
Understanding Your Address Book
60
2. Highlight an Entry to be copied to the SIM, then press the
Check ) key. A check mark appears in the box to the
Copying an Entry to the Phone
(
You can copy a SIM entry to the Phone by using the Duplicate
option. When you copy entries to the phone, duplicate entries are
created.
left of the Contact name. Repeat this step for all Entries to
be copied to the SIM.
1. When the Idle screen displays, press the Menu soft key,
3. After checking all Entries to be copied, press the Copy soft
key. You are prompted to confirm that you want to copy
these Entries to the SIM card.
then select Address Book ➔ Contacts.
2. Select an entry which currently resides on the SIM Card.
•
•
If the entry’s associated Group graphic has a SIM location icon on it,
then the entry already exists on the SIM card. This is the type you
can duplicate.
•
•
To copy the checked Entries to the SIM card, press the Yes soft key.
To cancel copying the checked Entries, press the No soft key.
4. To return to the Idle screen, press the
key.
If the entry’s associated Group image does not have a SIM location
icon, then this entry currently already exists on the phone.
Dialing a Number from the SIM Card using the Location
Number
3. Press the Options soft key, then select More ➔ SIM
1. In Idle mode, enter the location number for the phone
Management ➔ Copy Contacts from SIM.
number you want to dial and press
.
4. When you are finished, press
to return to Idle mode.
All of the contacts saved on the SIM display, with the
contact entry selected are highlighted.
Deleting All of the Address Book Entries
You can delete All, Phone, or SIM entries from your phone’s
memory.
2. Press the Up or Down Navigation key to find other
numbers on the list.
3. When you have selected the number you want to call,
press the Call soft key,
, or
.
61
1. When the Idle screen displays, press the Menu soft key,
then select Address Book. the Address Book menu
appears.
7. When you are finished, press
to return to Idle mode.
To delete all SIM entries:
8. At the Address Book menu, select SIM Management ➔
To delete all Phone entries:
Delete Contacts from SIM ➔ All.
2. Select Contacts.
You can remove the check mark by pressing the
again. Selecting All places a checkmark adjacent to every
entry in the list.
key
You must highlight an added contact, using the Up or
Down Navigation keys in order to access the Delete
option.
9. Press the Delete soft key to delete the check Phone
3. Press the Options soft key, then select Delete ➔ Multiple
entries.
➔ All.
10. At the Delete? confirm screen, press the Yes soft key to
You can remove the check mark by pressing the
key
continue, or the No soft key to cancel.
again. Selecting All places a checkmark adjacent to every
11. Enter the password and press the OK soft key or the
entry in the list.
key.
4. Press the Delete soft key to delete the check Phone
12. When you are finished, press
to return to Idle mode.
entries.
Note: Entries on the FDN Address Book must be deleted from within the FDN
5. At the Delete? confirm screen, press the Yes soft key to
Address Book
continue, or the No soft key to cancel.
6. Enter the password and press the OK soft key or the
key.
Understanding Your Address Book
62
Checking the Used Space
3. When you are finished viewing your phone’s Memory
Status, press to return to Idle mode.
You can check how many names and numbers are stored in the
Address book, in both SIM card and the phone memory. You can
also see the capacity of both memories.
Using the Service Dialing Numbers
You can view the list of Service Dialing Numbers (SDN) assigned
by your service provider. These numbers include emergency
numbers, customer service numbers, and directory inquiries.
1. When the Idle screen displays, press the Menu soft key,
then select Address Book.
2. Select Address Book Settings ➔ Used Space. Used
1. When the Idle screen displays, press the Menu soft key,
space is listed for the following units:
then select Address Book ➔ Service Number.
•
Phone: tells you how many Address Book entries (out of a possible
2. Scroll through the numbers by using the Up or Down
1000) are in use.
Navigation key.
•
•
SIM Card: tells you how many entries are in use on your SIM card.
3. To dial the number displayed, press
.
Additional No. 1: if you have added additional numbers to
contacts saved on the SIM card, this is a counter of the number of
SIM contacts with a second number saved on your SIM card.
Note: This menu is available only when your SIM card supports Service
Dialing Numbers.
•
Additional No. 2:if you have added additional numbers to contacts
saved on the SIM card, this is a counter of the number of SIM
contacts with a third number saved on your SIM card.
•
•
Email: tells you how many entries are in use.
FDN Contacts: tells you how many entries are in use (out of a
possible 40).
Note: Depending on the SIM card, the number of entries may differ.
63
Section 8: Messaging
This section describes how to send or receive different types of
messages. It also includes the features and functionality
associated with messaging.
Creating and Sending Messages
1. When the Idle screen displays, press the Menu soft key,
then select Messaging ➔ Create New Message
.
Types of Messages
Your phone provides the following message types:
2. While composing your message text, press the Options
soft key. Choose from the following options:
•
•
•
Text Messages
•
•
Text: allows you to set Text Selection (lets you highlight text for Cut/
Copy/Remove) on or off, to Cut previously entered text, to Copy text,
or to Remove text before sending.
Add Item: allows you to add an Image, a Sound file, or a Video clip
to your message.
Multimedia (Picture and Video) Messages
IM Messages
The Short Message Service (SMS) lets you send and receive text
messages to and from other mobile phones and email addresses.
To use this feature, you must subscribe to your service provider’s
message service.
Important!: Adding an image, a sound file, or a video clip to a text message
changes the message from a text message to a multimedia
message.
The Multimedia Messaging Service (MMS) lets you send and
receive multimedia messages (such as picture messages and
video messages) to and from other mobile phones. To use this
feature, you must subscribe to your service provider’s multimedia
message service.
This also changes which Options that appear in this menu.
•
Create Item: allows you to temporarily exit from the current text
message and create either a new photo, video clip, or audio clip for
your current text message.
–
Take Photo: allows you to temporarily exit the message, take a photo
with phone’s camera, and then add it to your message.
Important!: When creating a message, adding an image, a sound file, or a
video clip to a text message changes the message from a text
message to a multimedia message.
Messaging
64
–
–
Record Audio: allows you to temporarily exit the message, record an
audio clip using the phone’s microphone, and then add it to your
message.
–
–
–
–
–
–
–
–
–
–
File: allows you to insert an audio, graphic, or video clip to your
message as an attached file.
Business Card: allows you to insert the contact information for an
entry from Address Book directly to your message as an attached file.
Record Video: allows you to temporarily exit the message, record a
video clip using the phone’s camera, and then add it to your message.
Appointment: allows you to insert an Appointment entry from your
calendar directly to your message as an attached file.
•
Insert: allows you to insert a predefined Text template, Text
emoticon, Business card, or favorite web address into the
message.
Anniversary: allows you to insert an Anniversary entry from your
calendar directly to your message as an attached file.
–
Symbol: allows you to insert punctuation and symbols into your
message.
Private: allows you to insert a Private entry from your calendar directly
to your message as an attached file.
–
Text Emoticon: allows you to add an emoticon (created by phone
Holiday: allows you to insert a Holiday entry from your calendar directly
to your message as an attached file.
characters) to your message. An example would be:
creates a :-) “happy face”.
which
Important: allows you to insert an entry from your calendar tagged as
an Important directly to your message as an attached file.
–
–
–
Text Template: allows you to insert one of the preset message
templates to the text, such as (Out of Office, I’m in a meeting).
Tasks: allows you to insert an entry from your calendar tagged as a
Task directly to your message as an attached file.
Address Book: allows you to add contact information for an entry from
your Address Book directly to your message.
Notes: allows you to insert a presaved Note (text) directly to your
message as an attached file.
Favorites: allows you to add a web address from your Favorites list of
Internet sites to the message.
Favorites: allows you to add a web address from your Favorites list of
Internet sites as an attachment to the message.
•
•
Input Language: allows you to temporarily change the input
language used to create your message.
• More
:
Input Method: allows you to change the method used to input
data into your message, such as text, numbers, and symbols. (For
Add Attachment: allows you to add either a file, card, or other
information such as a calendar entry, task, or note.
–
–
–
Sending Options: allows you to configure the options associated with
sending the message.
Request Reports: allows you request a delivery report or a read report
from the receipent of your message.
•
Save to Drafts: saves the current message to the Drafts folder.
65
–
Save as Templates: allows you to save the current text message or
multimedia message to the current list of preset message templates,
such as (Out of the Office, I’m in a meeting).
–
Once you have selected the desired entries, press the Done soft key to
return to the previous list of Recipients.
•
Change Recipients: allows you to update the recipient list by
•
Back: allows you to return to the active message or to the Options
menu from a sub-menu.
adding Carbon Copy (Cc) and/or Blind Carbon Copy (Bcc)
recipients.
•
•
Remove: allows you to remove a recipient from the list.
Save to Drafts: allows you to save the text message to your Drafts
folder for sending later.
3. When you have finished composing your message, press
the Send To soft key and confirm the recipient(s).
• Back: allows you to return to the active message.
4. Send the message to the selected recipients by pressing
Note: You can enter an email address in the To field.
either the Send soft key or the
key.
To access more options, press the Options soft key.
Choose from the following options:
Viewing New Received Messages
1. In Idle mode, new messages are indicated by icons and a
New Messages pop-up.
•
•
Send: allows you to send the message.
Add Recipients: allows you to update the recipient list by adding
information from either your Recent Log, Contacts, or Group
entries.
The following icons indicate the message type.
• indicates a new Voicemail message.
Note: A multimedia message should only be sent to a phone which can
support the receipt and display of this message type.
You can also add more recipients from your Address Book by selecting
• indicates a new Email message.
• indicates a new Text message.
one of the Empty recipient fields and pressing the
key.
Add the additional recipients from your Address Book by using your Up
and Down Navigation keys to select those entries you wish to add.
Press the key to place a checkmark next to those entries.
–
–
Messaging
66
• indicates a new Multimedia message.
Note: Messages can also be accessed by navigating to your Inbox (Menu
Messaging Inbox).
➔
➔
Using Message Options
Message options at the Inbox level differ according to the
message type, what you have done with the message, and
whether you are viewing the message.
2. Press the View soft key or the
key. The Messaging –
Inbox screen displays and lists information about the
incoming messages.
Note: If you exit from this View screen, you will need to go to the Messaging
➔ Inbox screen, the Recent Calls screen, or you will need to dial
your Voicemail contact to access your messages.
ᮣ
While viewing the list of messages in the Inbox, highlight a
message and press the Options soft key to access the
following message options:
3. Use the navigation keys to highlight a message you wish to
• View/Play: allows you to view or play the multimedia message.
• Reply: allows you to compose and send a reply to the message.
• Forward: allows you to forward the message.
view, then press the
key. The selected message
appears in the display.
• Call Back: allows you to dial the originating message number.
• Delete: deletes the Selected message, Multiple messages, or All
messages.
• Save to Address Book: allows you to save the recipient or sender’s
information from the message to your Address Book on either the
4. To play a multimedia message with an audio file or video
clip, press the key.
To pause playing an audio/video clip, press the
To stop playing an audio/video clip press the Stop soft key.
•
•
key.
5. To scroll through the message (if additional text pages
have been added), press the Up or Down key.
• More
:
6. When you have finished, press the
key.
–
Move to Phone/Move to SIM: If a message is stored in the SIM card,
it is saved to the phone’s memory. If a message is stored in the phone’s
memory, it is then saved to the SIM card.
–
Lock/Unlock: prevents/allows deletion of this message.
67
–
Sort by: allows you to sort the messages in your Inbox by: date, sender,
–
Properties: shows the Date, Destination, Size, Priority, Expiration,
read/unread, type, subject, size, and locked status.
Delivery Report, and Read Report.
ᮣ
While viewing a selected message, press the Options soft
Signing into Your Mobile Email
key to access the following message options:
Take your email with you! With Mobile Email you can check your
®
®
®
Yahoo! Mail, AOL , AIM , Windows Live Hotmail, AT&T Yahoo!
BellSouth, and other providers quick and easily.
,
• Reply: allows you to compose and send a reply to the message.
• Forward: allows you to forward the message.
• Call Back: allows you to dial the originating message number.
• Delete: deletes the Selected message.
• Save Items: saves the multimedia content to the phone or
microSD™ memory card.
1. When the Idle screen displays, press the Menu soft key,
then select Messaging ➔ Mobile Email.
2. Use the Navigation keys to highlight an Email carrier of
• Save to Address Book: allows you to save the recipient or sender’s
information from the message to your Address Book on either the
your choice and press the Select soft key or the
key.
3. Use the Navigation keys to highlight which domain your
personal account uses (for example, “@hotmail.com”) and
press the Select soft key or the key.
• More
:
–
Move to Phone/Move to SIM: If a message is stored in the SIM card,
it is saved to the phone’s memory. If a message is stored in the phone’s
memory, it is then saved to the SIM card.
4. Type in your personal Email address (for example,
“silverfox2”), then enter your account's Password and
press the Sign In soft key. You will be connected to your
account's Inbox and contacts, where you can send and
receive emails.
–
–
Move to My Folder: moves the message to the phone’s My Folder
location.
Save as Templates: saves to the message as a template for this
message type. This template can be used to save time during the
creation of the next similar message.
Using Instant Messenger (IM)
–
–
Lock: locks the message.
The Instant Messenger allows you to send and receive instant
Print via Bluetooth: allows you print the contents of the message on a
®
Bluetooth compatible printer.
messages using AIM, Windows Live, and Yahoo! communities.
Messaging
68
Signing into Your IM Account
Outbox
Although each account type differs, the initial sign in procedure is
common to all supported types. Before beginning the sign in
procedure, you must complete the previous procedures for
selecting your default IM Community.
This message box holds contains messages until they are sent
and then the message no longer displays in this box but instead
displays in the Sent box.
When you enter this menu, the list of messages in the Outbox
displays with the recipients’ phone numbers or names, if
available in your Address Book.
1. When the Idle screen displays, press the Menu soft key.
2. Highlight Messaging, and press the Select soft key or the
Drafts
key.
This message box stores unsent messages that you want to edit
or send later.
3. Highlight IM and press the Select soft key or the
key.
4. Highlight Sign In/On and press the Select soft key or the
My Folder
key.
My Folder allows you to organize and save messages. You can
create custom folders and save your messages to these folders
for access at a later time.
5. Use the Navigation keys to highlight each log in field and
then use the keypad to enter the appropriate information.
Using Message Templates
6. Press the Options soft key. Highlight Sign In and press the
Your phone has Text and Multimedia message templates that you
can retrieve and apply when creating a message. You can
change the applied template as needed before sending a
message.
Select soft key or the
key.
Sent
This message box stores a copy of the messages you sent.
1. When the Idle screen displays, press the Menu soft key,
then select Messaging ➔ Templates.
69
2. Select a template type (Text Templates or Multimedia
2. Select a message folder (Inbox, Sent, Outbox, Drafts, or My
Message Templates).
Folder). A list of messages in the folder appears in the
display.
3. Highlight a current template message and press the
Options soft key to access the following options:
3. To delete an individual message, highlight that message.
•
Send: allows you to create and send a message using the selected
template.
Add New: allows you to add a new template to the list.
Edit: allows you to change the currently selected template.
4. Press the Options soft key, then select Delete. The
following options appear in the display:
•
•
• Selected: deletes this message, provided it is unlocked.
• Multiple: displays a checklist that lets you select All or one or more
particular messages for deletion. (When you have finished your
selection, press the Delete soft key.)
• Insert to Message: opens a new message using the template.
Delete: deletes the currently selected template.
•
4. When you have finished, press
.
Select the desired option.
Deleting Messages
When your phone’s memory is full, an error message displays
and you cannot receive any new messages. Use the Delete option
erase obsolete messages, freeing memory for new messages.
5. At the “Delete?” prompt, press either the Yes soft key to
confirm the deletion or the No soft key to cancel.
Delete All Messages
1. When the Idle screen displays, press the Menu soft key,
then select Messaging ➔ Delete All.
You can delete the messages in each message folder(s)
individually or all at one time. You can also delete all of your
messages at one time.
2. Highlight each of the message folder(s) you want to empty:
Deleted Individual or Multiple Messages
1. When the Idle screen displays, press the Menu soft key,
then select Messaging.
•
•
All: allows you select all of the list items for content deletion.
Inbox: allows you select the Inbox folder messages for deletion.
Messaging
70
2. Select the type of message settings that you want to
Note: The Inbox folder lets you select Read and/or Unread messages for
deletion. Use the Right navigation key to expand these options for
selection.
change.
• Text Message
• Multimedia Message
• Voice Mail
•
•
•
•
Sent: allows you select the Sent folder messages for deletion.
Outbox: allows you select the Outbox folder messages for deletion.
Drafts: allows you select the Drafts folder messages for deletion.
My Folder: allows you select the My Folder folder messages for
deletion.
• Push Message
3. Press the Select soft key or the
key.
Text Message
3. Press
to mark the folder containing messages you
The following options are available:
want to delete.
•
Sending Options: allows you to set the following options:
Keep a Copy: allows you to keep a copy of your sent messages.
To delete all of the unlocked messages in all of the folders,
–
mark All.
•
Text Message Center Settings: allows you to set the default method
of text message transmission used by the Text Message Center. The
options are:
4. Press the Delete soft key.
5. At the “Delete?” pop-up, press the Yes soft key or the
–
–
–
SMS Settings: allows you to configure the Text message delivery
parameters when sending Text messages.
Email Settings: allows you to configure the Email parameters when
sending this type of message.
Empty: allows you to configure a new Text Message Center profile for
use when sending this type of message.
key to delete.
6. When you have finished, press
.
Messaging Settings
You can set up various options for using messaging services.
1. When the Idle screen displays, press the Menu soft key,
then select Messaging ➔ Messaging Settings.
Multimedia Message
The following options are available:
•
Sending Options:
71
–
–
Priority: you can select the priority level of your messages.
Expiration: select the length of time you wish the message you sent to
remain on the Multimedia message server.
Delivery: you can set a time delay before the phone sends your
messages.
–
–
Reject Anonymous: allows you to automatically reject messages with
a category of anonymous.
Reject Advertisement: allows you to automatically reject messages
with a category of advertisement.
–
–
–
–
–
–
•
Multimedia Message Profiles: you can select a connection profile
which is then used for sending and receiving Multimedia messages.
–
Size: you can set the maximum allowed size (30/100/300/600 KB) for a
multimedia message.
MMS Profiles: allows you to select a profile (MEdia Net, AT&T MMS or
AT&T IMS) for sending a multimedia message.
Profile Settings (accessed by pressing the Options soft key and
selecting the Edit option)
Request Delivery Report: when this option is enabled, the network
informs you whether or not your message has been delivered.
Request Read Report: when this option is enabled, your phone sends a
request for a reply along with your message to the recipient.
Keep a Copy: you specify whether you want to keep a copy of the sent
messages on your phone.
–
•
•
•
•
•
•
•
•
•
•
Set Name
Access Name
Auth Type
User ID
Password
Protocol
Home URL
Proxy address
Add My Business Card: you send your content information along with
your sent messages.
•
Receiving Options: you can specify the category of messages you
want to receive. Allows you to set the following:
–
Download Type: allows you to set the message receipt options. Choose
from Auto Download, Manual, or Reject.
Send Delivery Report: when this option is enabled, the phone allow the
network report to the sender whether or not the message has been
received.
Send Read Report: when this option is enabled, your phone sends a
notification back to the recipient indicating that your message has been
received.
Linger Time (Sec.)
Advanced Settings (Static IP, Static DNS, and Traffic Class)
–
•
•
Auto Resize Image: you can specify whether or by how much to
resize a received image (No Resize/100/300/600 KB).
Creation Mode: you can specify that the users creating new media
content be given the following options:
–
–
Warning
Messaging
72
–
–
Free
Restricted
•
•
Receiving Option: you can specify whether to turn push message
reception On or Off.
•
Default Style: you can specify the default visual parameters used by
Service Loading: you can specify to load this service Always, Prompt,
this type of message:
or Never.
–
–
–
–
Font Color
Font Style
Background Color
Page Duration
Used Space
You can check the amount of the memory being used and the
memory remaining for Multimedia, Text, Push, and Configuration
Messages. The display shows the total space including the used
and free space. You can also view how much space is currently
occupied by each message box.
Voice Mail
The following options are available:
•
Voicemail: Press the Edit soft key to specify the default phone number
1. When the Idle screen displays, press the Menu soft key,
used for access of phone’s remote voicemail:
then select Messaging ➔ Used Space.
–
Name: allows you to create a new descriptive name for this access
number.
2. Use the Left and Right Navigation keys to select a
particular message type for review.
–
Center Address: allows you edit the existing number and create a new
number for use when accessing the remote voicemail.
3. Select a particular folder for review. The contents of that
folder are then listed.
Important!: Changing the Voicemail Center Address can affect your ability to
access your voicemail. Check with your provider’s Customer
Service before changing.
4. When you have finished, press
.
Push Message
Push Messages are service provider-sent messages, that include
software upgrades or general information messages. The
following options are available:
73
Section 9: Changing Your Settings
This section includes quick tips on how to use some of use some
of your phone’s features, as well as how to change and
customize the display settings, call handling, security settings,
and other settings associated with your phone.
2. Highlight one of the following sound profiles:
• Normal
• Silent
• Driving
• Outdoor
Quick Tips
3. Press the Edit soft key to access the sound settings.
Quick Tips is a browser-based information service, provided by
AT&T. It contains frequently asked questions about features and
applications and their answers.
4. Press the Change soft key to change a particular settings.
5. Press the Save soft key when you are finished.
Normal Profile
1. In Idle mode, press the Menu soft key, then select
Setting
s
➔
Quick Tips.
To access the available options for this sound profile, press the
Edit soft key.
The phone opens the MEdia Net browser, and takes you to
the Quick Tips page, which is a free service for AT&T
customers.
•
To move between the various tabs, use the Left and Right Navigation
keys.
•
•
•
To highlight individual options, use the Up and Down Navigation keys.
2. To exit the browser at any time, simply press
.
To change the setting for a highlighted option, press Change
(
).
Sound Profile
You can customize various sound profiles for your phone by
changing the sound settings.
To save your changes, press the Save soft key.
Sound Settings
This list describes the sound settings for the following categories
(tabs):
1. When the Idle screen displays, press the Menu soft key
and select Settings
➔
Sound Profile.
•
Call:
Changing Your Settings
74
–
Call Alert Type: allows you to select the way in which the selected
ringtone is played when a call comes in on the phone.
•
Mute: the phone neither vibrates nor plays a ringtone. The only
indication of a message is an alert on the display.
–
–
–
Message Alert Tone: allows you select the tone played on receipt of a
message.
Message Alert Repetition: allows you choose how the tone is repeated:
once or periodic.
Message Tone Volume: allows you to select the volume that the alert
tone is played. The range is from 1-7.
•
•
Melody: the phone sounds the selected melody.
Increasing Melody: the phone sounds the selected melody,
which increases in volume until the call is answered, rejected, or
goes to voice mail.
•
•
•
Vibration then Melody: the phone vibrates initially, but then plays
the melody.
•
Phone:
–
Vibration & Melody: the phone vibrates and also plays the
melody.
Keypad Tone: allows you to choose between Beep
,
Xylophone, and
Mute (no tone) for keystrokes on the phone.
Power On Type: allows you to select the way in which the selected alert
is played when the phone is powered on.
Vibration & Increasing Melody: the phone vibrates and also
plays the melody, which increases in volume until the call is
answered, rejected, or goes to voice mail.
–
–
–
Call Ringtone: allows you to select a ringtone from your My Stuff
(Phone) folder which contains not only the default phone ringtones, but
also any new ringtones which have been downloaded from the Internet.
Ringtone Volume: allows you to select the volume that the ringtone is
played. The range is from 1-7.
•
•
•
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
Vibration & Melody: the phone vibrates and also plays the
melody.
•
Mute: the phone neither vibrates nor plays a ringtone. The only
indication of a message is an alert on the display.
•
Message
Message Alert Type: allows you to select the way in which the selected
alert is played when a new text or multimedia message is received.
:
–
–
Power Off Type: allows you to select the way in which the selected alert
is played when the phone is powered off.
•
•
•
Melody: the phone sounds the selected melody.
•
•
Melody: the phone sounds the selected melody.
Vibration: the phone vibrates.
Vibration: the phone vibrates.
Vibration & Melody: the phone vibrates and also plays the
melody.
75
•
•
Vibration & Melody: the phone vibrates and also plays the
•
To save your changes, press the Save soft key.
melody.
TheSilentprofilecausesthespeakertobemutedandthe
phone only vibrates or displays information on its LCD.
ThisiconisaccompaniedonscreenbytheVibrateorMute
icon. You may also set phone to automatically reply to a
voicecallorsendanautomated replytoanincomingtext
message.
Mute: the phone neither vibrates nor plays a ringtone. The only
indication of a message is an alert on the display.
–
Phone Sound Volume: allows you to set the volume of the phone from
power on/off. Changes made while using the phone are not reflected in
this default when the phone is powered off and then back on.
Other Available Profiles
The phone can be set to additional audio profiles which are
available via the Profiles menu. Although each profiles has
similarities, they have each been preset to use different audio
parameters for incoming phone call alerts, message alerts, and
Note: The Silent profile can also be activated by pressing and holding the
key or by reducing the volume to 0. An on screen message
notifies you that the Silent profile is now active. To deactivate this
profile, press and hold the
using the volume key.
key again or increase the volume
To access the available options for these sound profiles, highlight
the profile and press the Edit soft key.
TheDrivingprofilekeepsthespeakeractive.Inthiscase,
the speaker is active and will launch the currently
selected ringtone or melody when the associated
notification is activated. You may also set the phone to
automatically reply to a voice call or send an automated
reply to an incoming text message.
•
To move between the various tabs, use the Left and Right Navigation
keys.
•
•
To highlight individual options, use the Up and Down Navigation keys.
To change the setting for a highlighted option, press the Change
(
)
key.
Changing Your Settings
76
keys to make your selection. Press the Select soft key or the
to make your selection.
key
TheOutdoorprofilekeepsthespeakeractive,thevolume
settings are raised to their highest levels, any currently
active ringtones or melodies are activated, and the
phone’s vibrate feature is activated. This icon is
accompanied on screen by the Vibrate/Audio icon. You
may also set the phone to automatically reply to a voice
call or send an automated reply to an incoming text
message.
•
Menu Style: allows you to select whether the phone’s menus are
presented in either a Grid Menu style or List Menu style. Press the Up
or Down Navigation keys to make your selection. Press the Save soft
key or the
Pop Up List Menu
or Down Navigation keys to make your selection. Choose from On or
Off. Press the Select soft key or the key to make your selection.
Light Settings allows you to select the following options:
key to make your selection.
•
•
:
allows you to activate pop up menus. Press the Up
Display
In this menu, you can change various settings for the display or
backlight.
Note: Light settings can affect the length of time before battery recharge is
necessary.
ᮣ
When the Idle screen displays, press the Menu soft key and
select Settings Display
–
–
Brightness: allows you to adjust the display brightness for the LCD to
see it better in different lighting conditions. Press the Left or Right
Navigation keys to adjust the brightness. Press the Save soft key or the
key to make your selection.
➔
.
The following options are available. Use the Down
Navigation key to scroll to and set options:
Backlight Time allows you to select the amount of time for the
:
Display Settings
backlight to remain on and the length of time for the actual dimming to
occur. Press the Change soft key, then the Up or Down Navigation keys
•
Wallpaper: allows you to select Picture or No Image. If you select
Picture, you can choose from either the preloaded wallpapers found in
the My Stuff (Phone) folder or photographs which have been either
taken with the camera or downloaded from the Internet. The No Image
option leaves the wallpaper blank. Press the Up or Down Navigation
to make your selection. For On choose from either 10 Seconds
Seconds 1 Minute 3 Minutes, or 10 Minutes. For Dim choose from
either Off 5 Seconds 30 Seconds 1 Minute, or 3 Minutes. Press the
Select soft key or the key, then press the Save soft key.
,
30
,
,
,
,
,
77
•
Dialing Display
which are part of the display such as Font and Color:
:
allows you to select the properties of those items
ᮣ
When the Idle screen displays, press the Menu soft key
and select Settings Time & Date. The following options
➔
–
–
–
–
Font Type: allows you to select what font is used. Press the Left or Right
are available. Use the Down Navigation key to scroll to and
Navigation keys to make your selection. Choose from Normal 1 or
set options:
Normal 2. Press the Save soft key or the
selection.
Font Size: allows you to select a size for the selected font. Press the Left
or Right Navigation keys to make your selection. Choose from Large
Medium, or Small. Press the Save soft key or the
key to make your
•
Time Zone Updating: allows you to select whether the time zone
information is updated: Automatic (which greys-out some of the
other options), Manual Only, or Prompt First
.
,
•
Time Zone: allows you to enter the assign your current time zone
based upon Greenwich Mean Time. Major cities in each zone are
displayed upon selection. Press the Change soft key. Use the Left
or Right Navigation key to select a new zone. Press the Save soft
key to make your
selection.
Font Color: allows you to select a color for the selected font. Press the
Left or Right Navigation keys to make your selection. Choose from
key or the
key to save the new selection.
Monochrome Gradation, or Basic. Press the Save soft key or the
,
key to make your selection.
Tip: You can also choose to activate Daylight Savings Time within the Home
Zone menu option.
Background Color: allows you to select a color for the background
screen. Press the Left or Right Navigation keys to make your selection.
Choose from the available colors. Press the Save soft key or the
•
•
Time: allows you to enter the current time using your keypad. Press
key
the Right Navigation key to select AM or PM. Press the Save soft
to make your selection.
key or the
key to save the new selection.
•
Greeting Message: allows you to enter the text which appears on the
screen when the phone powers on.
Date allows you to enter the current date using your keypad. Press
the Left or Right Navigation key to navigate between the month,
day, or year fields. Press the Save soft key or the
the new selection.
key to save
Time & Date
This menu allows you to change the current time and date
displayed. You can also find out what time it is in another part of
the world.
•
Time Format: allows you to change the time format to 12 hours
12H) or 24 hours (24H). Use the Left or Right Navigation key to
(
Changing Your Settings
78
select between the two options. Press the Save soft key to save the
•
•
•
English: the selected phone language is changed to English.
Français: the selected phone language is changed to French.
Español: the selected phone language is changed to Spanish.
new selection.
•
Date Format: allows you to change the date format. Use the Left
or Right Navigation key to select between the different options.
Press the Save soft key to save the new selection.
–
Input T9: sets the language used when entering text into the phone. Use
the Up or Down Navigation key to highlight your selection. Press the OK
Note: Automatic updates of time and date do not change the time you have
softkey or the
to save your new selection. Options include:
key to make your selection. Press the Save soft key
set for alarm settings or calendar memos.
•
•
•
English: the selected phone language is changed to English.
Français: the selected phone language is changed to French.
Español: the selected phone language is changed to Spanish.
Phone
To customize the settings of your phone use the following steps:
ᮣ
When the Idle screen displays, press the Menu soft key
and select Settings Phone
•
•
Shortcuts: allows you to change the applications assigned to your
Navigation keys.
Press a particular Navigation key and press the Options softkey.
Highlight Change and press the . Use the Up or Down Navigation
key to select a new application to assign to the previously pressed key.
➔
.
The following options are available. Use the Down
–
–
Navigation key to scroll to and set options:
Phone Settings
–
Press the Save soft key or the
the assigned Navigation key.
key to save the new application to
•
Language: allows you to select a display language. You can set the
Screen Text language or the Input T9 Mode.
Auto Key Lock: allows you to enable or disable automatic locking of
the phone keys when the display Backlight Time is reached.
–
Screen Text: allows you to select the phone text. Press the Change soft
key, then use the Up or Down Navigation key to highlight your selection.
Press the Select soft key or the
the Save soft key to save your new selection. Options include:
key to make your selection. Press
Note: To unlock the keys, press any key to enable the display backlight, then
press the Unlock soft key and press
.
•
Automatic: the language is automatically selected according to
the language of the SIM card used.
•
Own Number: shows you the number assigned to the SIM in your
phone. It will allow you to change that number, but entering another
79
any person who does not have your PIN cannot use your phone without
your approval. The following options are available:
number will prevent you from making or receiving calls on the
handset. You may also add other names and numbers into your phone
for easy referral.
•
Off: the phone connects directly to the network when you switch it
on.
•
Security: The Security feature enables you to restrict the use of your
phone by the others and to restrict the types of calls. Various codes
and passwords are used to protect the features of your phone. The
following options are available. Use the Up or Down Navigation key to
scroll to and set options.
•
On: you must enter the PIN each time the phone is switched on.
Note: Before disabling the Check PIN Code feature, you must enter your PIN.
–
Lock Applications: using this option you can lock various applications.
Once you have locked the contents, you must enter the phone’s
password to access the associated menus. The applications options
are:
–
Lock Phone: when the Lock Phone feature is enabled, the phone is
locked and you must enter the 4- to 8-digit phone password each time
the phone is switched on. To change the phone password, see Change
Phone Password on page 81. Once the correct password has been
entered, you can use the phone until you switch it off. The following
options are available:
• All
• IM
•
Off: you are not asked to enter the phone password when you
• Messaging
• Recent Calls
• My Stuff
• Calendar
• Tasks
switch on the phone.
•
On: you are required to enter the phone password when you switch
on the phone.
–
–
Lock SIM Card: when the Lock SIM Card feature is enabled, your phone
only works with the current SIM. You must enter the lock code to unlock
the SIM so you can use a different SIM card. Once you have entered the
lock code, you are asked to confirm your password. Reenter your
password and press the OK soft key.
• Notes
• Address Book
–
Set FDN Mode: FDN (Fixed Dial Number) mode, if supported by your SIM
card, allows you to restrict the outgoing calls to a limited set of phone
numbers. The following options are available:
Check PIN Code: when the Check PIN Code feature is enabled, you
must enter your PIN each time you switch on the phone. Consequently,
Changing Your Settings
80
you can specify a new one. Once you have entered a new PIN2, you are
asked to confirm it by entering it again.
•
•
Off: you can call any number.
On: you can only call phone numbers stored in phone book. You
must enter your PIN2. The following options for entering FDN
contacts are available through the Address Book:
Note: Not all SIM cards have a PIN2. If your SIM card does not, this menu
does not display.
–
–
Full length entries or wild cards can be entered in to the FDN list.
A full length number with a specific contact name can be entered into
the FDN list.
–
APN Control: allows you to turn control of Access Point Names (APN)
On or Off. APNs are a method by which you can access advanced
communication using your handset. This advanced communication can
include instant messaging, multimedia messaging, email, and internet
access. Turning On APN Control requires the PIN2 code.
–
Wildcard entries allow a range of numbers to be dialed with a single
entry: ex. 555 – All dialed numbers that begin with 555 will be allowed.
Numbers that do not match the conditions in the FDN list will be
restricted.
•
Airplane Mode: allows you to turn On or Off the Airplane mode.
Airplane mode allows you to use many of your phone’s features, such
as Games, Music, Notepad, Voice Memos, etc., but you cannot send or
receive any calls or access online information. The Airplane mode is
displayed on screen by the Airplane icon.
Note: Entering an asterisk (*) is not required for wild card entries.
–
Change Phone Password: the Change Phone Password option allows
you to change your current phone password to a new one. You must
enter the current password before you can specify a new one. Once
you have entered a new password, you are asked to confirm it by
entering it again.
Calls
This menu allows you to change the actions taken by the phone
when dialing and receiving calls.
–
–
Change PIN Code: this option allows you to change your current PIN,
provided that the PIN Check feature is enabled. You must enter the
current PIN before you can specify a new one. Once you have entered a
new PIN, you are asked to confirm it by entering it again.
Change PIN2 Code: the Change PIN2 option allows you to change
your current PIN2 to a new one. You must enter the current PIN2 before
ᮣ
When the Idle screen displays, press the Menu soft key and
select Settings Calls. The following options are
➔
available. Use the Down Navigation key to scroll to and set
options:
81
General
highlight your selection. Press the
the Save soft key to save your new selection. Options include:
key to make your selection. Press
This allows you to configure some common high level
parameters used by the phone for most types of calls.
–
–
–
Call Connect Tone: allows you to activate an alert tone when the a
connection has been made.
Minute Minder: allows you to activate an alert tone which sounds
every minute the call is active.
Call End Tone: allows you to activate an alert tone when the line is
disconnected.
•
Show My Number: allows you to select how your ID is handled when an
outgoing call is initiated. Use the Up or Down Navigation key to highlight
your selection. Press the Select soft key or the
selection. Options include:
key to make your
–
–
–
Set By Network: you are identified to the other party using the default
network information.
Show Number: your phone number and name are sent to the other
party.
•
Alerts On Call: allows you to activate an alert tone for new messages
being received during an active call. Use the Up or Down Navigation key to
toggle between On and Off. Press the
Press the Select soft key to save your new selection.
key to make your selection.
Hide Number: your identifying information is hidden from the other
Voice Call
party.
•
Call Answer: allows you to select how your phone answers incoming calls.
Use the Up or Down Navigation key to highlight your selection. Press the
Options soft key, then the Select soft key to save your new selection.
Options include:
This option allows you to configure those phone parameters
associated to voice calls.
•
Call Forwarding: enables incoming calls to be rerouted to a number that
you specify. Use the Up or Down Navigation key to highlight your selection.
–
Send Key: allows you to answer an incoming call by pressing either
the Accept soft key or the key.
Press the
key to make your selection. Press the Select soft key to
save your new selection. Options include:
–
Any Key: allows you to answer an incoming call by pressing any key
–
Forward Always: allows you to forward Voice Calls. Press the Select
soft key and either enter the phone number or press the Options soft
key to select a number from your Address Book. Once you have
selected a number, press the Options soft key and select to either
on your phone.
•
•
Auto Reply: allows you to set up an automatic reply to messages when
the mode is activated.
Call Status Tones: allows you to activate an alert tone for one of three
Activate/Deactivate this feature.
available status categories. Use the Up or Down Navigation key to
Changing Your Settings
82
–
–
Busy: allows you to forward Voice Calls to a designated number
instead of your voice mail number if you are on another phone call.
Press the Select soft key and either enter the phone number or press
the Options soft key to select a number from your Address Book. Once
you have selected a number, press the Options soft key and select to
–
–
–
Activate: allows you to activate this feature for all Voice Calls. Press
the Options soft key to select this option.
Deactivate: allows you to deactivate this feature for all Voice Calls.
Press the Options soft key to select this option.
Check Status: allows you to check the status of this feature for all
Voice Calls. Press the Options soft key to select this option.
either Activate/Deactivate this feature.
No Reply: allows you to forward Voice Calls to a designated number
instead of your voicemail number when there is no answer on your
phone. Press the Select soft key to check the status of the option or to
select a number from your Address Book. Once you have selected a
•
Auto Redial: allows to you automatically redial the last number if the call
was either cut off or you were unable to connect. Press the key to
make your selection. Press the Select soft key to save your new selection.
Options include:
number, press the Options soft key and select to either Activate
Deactivate this feature. You can also select the amount of time that
the phone delays before forwarding.
Unreachable: allows you to forward Voice Calls to a designated
number instead of your voicemail number when you are not in an area
covered by your service provider or when your phone is switched off.
Press the Select soft key and either enter the phone number or press
the Options soft key to select a number from your Address Book. Once
you have selected a number, press the Options soft key and select to
/
–
–
On: causes the phone to automatically redial the last number if the call
was disconnected or the call was cut off.
Off: keeps the phone from automatically redialing the last number if the
call was disconnected or the call was cut off.
–
–
Connectivity
The Connectivity option allows you to manage the settings
associated with the connection types available to your phone,
including: Bluetooth, Network Profiles, Select USB Mode, and IMS
settings.
either Activate/Deactivate this feature.
1. When the Idle screen displays, press the Menu soft key,
Cancel All: allows you to cancel all Call Forwarding features. Press the
Select soft key to activate this feature.
then select Settings ➔ Connectivity.
•
Call Waiting: informs you when someone is trying to reach you during
another call. Press the Options soft key to make your selection. Press the
Select soft key to save your new selection. Options include:
2. Use the Down Navigation key to scroll to and set these
options.
83
Bluetooth
•
My Devices: provides a list of Bluetooth devices discovered by your
handset.
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection. Unlike infrared, you
don't need to line up the devices to beam information with
Bluetooth. If the devices are within connectivity range of one
another, you can exchange information between them, even if
they are located in different rooms.
1. From the Bluetooth menu, select My Devices.
2. To search for the Bluetooth device(s), select Search For
New Device.
3. A list is provided for all Bluetooth enabled devices in range
of your phone. Highlight the device you wish to to pair with
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
and press
.
4. Enter the PIN for the device.
If connecting to a Bluetooth wireless device, consult your
Bluetooth device user manual for your assigned PIN.
If connecting to another handset, enter the same user-
defined PIN on both handsets.
•
Bluetooth: allows you to use the Bluetooth features available when
Bluetooth is activated. When the Bluetooth is deactivated, you cannot
send or receive information via Bluetooth. To save battery life or in
situations where Bluetooth use is prohibited, you can turn off the
Bluetooth headset.
•
Discoverable: allows your phone to wirelessly transmit its phone
name and status, when activated. This can be useful if you are
attempting to connect additional Bluetooth devices. Allowing your
phone to promote its visibility can pose a security risk and incite
unauthorized connection. This feature should be paired with a
Note: The first time you try to pair with a handset, you and the owner of the
other handset must enter the same PIN. Once the handsets are paired,
you will not need to use the PIN again.
5. Press the Pair soft key or press
.
6. If you are unable to pair with the device a popup appears in
Bluetooth security option. Highlight the option (On/Off) and press the
Select soft key or the key.
the display. Press the Yes soft key to retry.
Changing Your Settings
84
•
My Bluetooth Info: shows information and settings your phone uses
to communicate with other Bluetooth devices.
Configuring your Phone’s USB Mode
Your phone can connect to a PC via the USB cable (sold
separately). The phone can be configured to launch a default
application when an active USB connection is detected.
–
Device Name: allows your phone to identify itself using the name
entered into this text field, when your phone’s Bluetooth visibility is
turned On. This name can be altered by selecting the pre-existing text
and typing a new name in its place. This feature should be paired with
a Bluetooth security option.
Note: The Bluetooth feature must first be disabled before initiating a USB
connection with the phone. Prior to connecting the USB cable to the
phone, install the latest version of the PC Studio application. This
application installs the necessary USB drivers onto your machine.
1. Press
to erase the previous name.
2. Use the phone’s keypads to enter a new name. The default
input entry method is Abc, where the initial character is
Uppercase and each consecutive character in that same
word is left as lowercase text.
1. Use the USB adapter cable to connect the handset to the
target PC. When an active connection has been
established, a USB icon (
) appears on the phone.
2. When the Idle screen displays, press the Menu soft key,
then select Settings ➔ Connectivity ➔ Select USB
Mode.
3. Press the Option ➔ Save soft key or press
to save the
new name.
–
–
–
Device Address: shows your phone’s Bluetooth address.
3. Use the Up or Down Navigation key to highlight one of
Bluetooth H/W Version: shows your phone’s hardware version.
Bluetooth S/W Version: shows your phone’s Bluetooth software
version.
these options:
•
Ask on Connection: requires the phone to present a “Select
USB Mode” pop-up which requires you to assign the USB
application.
–
Remote SIM Mode: allows you to toggle a remote SIM Mode on/off.
•
Search for New Device: allows your phone to search for other, visible
Bluetooth devices. Allows you to select one of the Bluetooth devices to
connect with your phone.
•
Media Player: sets the Media Player to launch as the default
application when a USB connection is detected.
85
•
•
PC Studio: is set to launch PC Studio as the default application
when a USB connection is detected. For a free download of PC
Studio, go to www.samsung.com.
• AT&T IMS
Note: The MEdia Net WAP is pre-configured and cannot be altered on this
screen. The AT&T MMS connection option can be edited, renamed, or
deleted on this screen. Your phone is set up by default for connecting
to the network. If you change the settings without first checking with
your service provider, the web browser, MMS, and e-mail features may
not work properly.
Mass Storage: sets the USB connection to a mass storage
device such as a zip drive.
4. With the application highlighted, press the Select soft key
or press
.
3. To create a new connection, press the Options soft key,
Configuring your Phone’s Network Profiles
then select New.
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via one of three available
WAP browsers: Media Net, AT&T MMS (MultiMedia Server), and
AT&T IMS. You need these settings to use the web browser or
send MMS messages or Emails.
- or -
To edit the existing AT&T MMS, highlight this entry, press
the Options soft key, then select Edit.
4. Select the parameter you want to edit:
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
•
•
•
Set Name: enter a profile name.
Access Name: edit the access point name.
Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
•
•
User ID: enter the User ID required to connect to the network.
1. When the Idle screen displays, press the Menu soft key,
Password: enter the user password required to connect to the
network.
then select Settings
➔
Connectivity
➔
Network Profiles.
2. Highlight one of these options:
•
Protocol: set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• MEdia Net
• AT&T MMS
Changing Your Settings
86
•
•
•
Home URL: enter the URL address of the page to be used as your
Important!: If you reset the IMS Service to Off, you will not be able to use the
homepage.
Video Share option.
Proxy address: MEdia Net set as the proxy server address and
port.
Note: Having the IMS Service set Off may save minutes and memory.
Linger Time (Sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
•
Profile: allows you to set the server that service is coming from.
•
Advanced Settings: allows you to configure some of the IP-
specific information: Static IP, Static DNS, Server information, and
Traffic Class.
Important!: If you change from the default AT&T IMS, you may not be able to
use Video Share.
–
–
–
Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
Applications Settings
The Applications Settings feature allows you to configure the
functional parameters for most of the onboard applications.
These applications are described in more detail within other
sections of this manual.
Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
Traffic Class: select the traffic class.
1. When the Idle screen displays, press the Menu soft key,
then select Settings ➔ Applications Settings.
Note: The WAP settings may vary depending on the service provider.
2. Select the type of application which you want to change:
IMS Settings
• Messaging Settings
• Browser Settings
• Camera Settings
IMS is the method used to connect to the server in order set up
the Video Share option.
• Music Player Settings
• Cellular Video Settings
• Video Share Settings
•
Service: allows you to set the IMS service to On or Off.
87
• Record Audio Settings
• Calendar Settings
• Address Book Settings
6. The following options are available. Use the Up or Down
Navigation key to scroll to and set options. Choose from
the following:
Video Share Settings
• All
To enable the Alerts, Auto Record, and Recording Location for
Video Share, use the following steps.
• Sound Profiles Settings
• Display Settings
• Phone Settings
• Alarms
3. When the Idle screen displays, press the Menu soft key and
select Settings
➔
Applications Settings
➔
Video Share
Settings. To access the following options, press the Select
7. Press
to make your selection and press the OK soft
soft key.
key.
•
•
•
Alerts: allows you to turn On or Off the Video Share Alerts which
displays a message and a tone.
8. Enter your phone password, if prompted.
Auto Record: allows you to turn On or Off the Auto Record which
records the Video Share call.
9. At the “Reset Settings?” prompt, press the Yes soft key
to reset, or the No soft key to cancel. Once your phone has
been reset to its default settings for those selected options,
it will restart itself in order to incorporate the new settings.
Recording Location: allows you to set whether video recorded is
stored on the phone or on the microSD memory card.
4. Press
to save the option.
Memory Management
Reset Settings
You can easily check the amount of memory being used for
storing data, such as messages, media, calendar data, or
contacts entries. You can also delete any selected information
from your phone:
You can easily reset your phone to its default settings. To reset
your phone:
5. When the Idle screen displays, press the Menu soft key and
select Settings
➔
Reset Settings.
1. When the Idle screen displays, press the Menu soft key and
Changing Your Settings
88
select Settings
➔
Memory Management
.
3. Enter your password (if applicable) and press the OK soft
key. Depending on your phone’s security settings, you may
be asked to enter your password a second time.
2. The following options are available. Use the Up or Down
Navigation key to scroll to and set options. Choose from
the following:
4. At the Clear memory? confirm screen, press the Yes soft
key to continue, or the No soft key to cancel.
• Clear Memory
• Used Space
5. When you are finished, press
to return to Idle mode.
Clearing Memory
Checking the Used Space
1. From the Memory Management sub-menu, select Used
Note: To completely remove any personal information stored on your device,
Space.
2. Select one of the following storage categories:
1. From the Memory Management sub-menu, select Clear
Memory ➔ All to select all available categories.
• Shared Memory
• Messaging
You can remove the check mark by pressing
.
• My Stuff
Selecting All places a checkmark adjacent to every entry
• Calendar
in the list.
- or -
• Tasks
• Notes
Select a specific category.
• Address Book
3. To view the contents of a category’s memory, use the Up or
Down navigation key to select the entry and press the
Select soft key.
2. Press the OK soft key.
89
4. To delete all the entries in this category, highlight All and
press to select the categories.
5. Press the Delete soft key.
6. At the Delete? confirm pop-up, press the Yes soft key to
continue, or the No soft key to cancel.
7. When you are finished, press
to return to Idle mode.
Software Update
The Software Update feature enables you to use your phone to
connect to the network and upload any new phone software
directly to your phone.
1. When the Idle screen displays, press the Menu soft key and
select Settings
2. Press to continue the update process and follow the
on screen instructions.
➔
Software Update.
Phone Information
This option allows you to see the phone number of the phone, the
manufacturer, and the model number. This information may be
necessary if talking to Customer Service in the event of a
problem.
ᮣ
When the Idle screen displays, press the Menu soft key,
then select Settings ➔ Phone Information.
Changing Your Settings
90
Section 10: MEdia Mall
The MEdia Mall topics covered in this section are shopping for
Tones, Games, Graphics, Multimedia, Applications, and Videos as
well as accessing the MEdia Net Home Site.
Shop Games
The Shop Games menu option allows you to shop for games
using the built-in browser. You can download new games to your
Games and Apps folder. To access this menu option, use the
following steps:
Shop Tones
The Shop Tones menu option allows you to shop for audio tones
using the built-in browser. You can download, record new, and
save audio to either your Audio or Music folder.
1. When the Idle screen displays, press the Menu soft key
and select MEdia Mall ➔ Shop Games to launch the built-
in browser and select a game to download.
To access this menu option, use the following steps:
1. When the Idle screen displays, press the Menu soft key
2. Follow the on-screen options. The downloaded files can be
stored in the Games and Apps folder found within the My
Stuff (On phone) location.
and select MEdia Mall
➔
Shop Tones to launch the built-in
browser and select a file to download.
2. Follow the on-screen options. The downloaded files can be
stored into either the Audio or Music folders found within
the My Stuff (On phone) location.
3. Select a game entry.
4. When you are ready to purchase the game, press the Buy
Now button to complete the transaction.
3. Select an audio file.
Shop Graphics
4. When you are ready to purchase the audio file, press the
The Shop Graphics menu option allows you to shop for graphic
images using the built-in browser. You can download new
images to your Graphics folder. To access this menu option, use
the following steps:
Buy Now button to complete the transaction.
91
1. When the Idle screen displays, press the Menu soft key,
then select MEdia Mall ➔ Shop Graphics to launch the
built-in browser and select an image to download.
2. Follow the on-screen options. The downloaded files can be
stored in the Video folder found within the My Stuff (On
phone) location. These files can be included into
multimedia messages or sent as attachment files to text
messages.
2. Follow the on-screen options. The downloaded files can be
stored in the Graphics folder found within the My Stuff (On
phone) location. These images can be used as wallpapers
or included into multimedia messages.
3. Select an video file entry.
4. When you are ready to purchase the file, press the Buy
3. Select an image entry.
Now button to complete the transaction.
4. When you are ready to purchase the image, press the Buy
Shop Applications
Now button to complete the transaction.
The Shop Applications menu option allows you to shop for
application files using the built-in browser. You can download the
new applications to your Applications folder. To access this
menu option, use the following steps:
Shop Multimedia
The Shop Multimedia menu option allows you to shop for
multimedia files using the built-in browser. You can download
new videos to your Videos folder. To access this menu option,
use the following steps:
1. When the Idle screen displays, press the Menu soft key
and select MEdia Mall
➔
Shop Applications to launch the
built-in browser and select an application to download.
1. When the Idle screen displays, press the Menu soft key
and select MEdia Mall
➔
Shop Multimedia to launch the
2. Follow the on-screen options. The downloaded
applications can be stored in the Games and Apps folder
found within the My Stuff (On phone) location. These files
can be included into multimedia messages or sent as
attachment files to text messages.
built-in browser and select a video file to download.
MEdia Mall
92
3. Select an application file entry.
Accessing the MEdia Net Home
The MEdia Net menu option allows you to quickly access your
MEdia Net homepage using the built-in browser. This page gives
you quick access to information such as local weather, sports
scores, horoscope information and quick links to the previously
mentioned shopping sites. To access this menu option, use the
following steps:
4. When you are ready to purchase the application, press the
Buy Now button to complete the transaction.
Shop Videos
The Shop Videos menu options allows you to shop for video files
using the built-in browser. You can download the videos to your
Video folder found within the My Stuff location. These files can
be included into multimedia messages if they do not exceed the
limit allowed.
ᮣ
When the Idle screen displays, press the Menu soft key,
then select MEdia Net ➔ MEdia Net Home to launch the
built-in browser and launch this AT&T homepage.
1. When the Idle screen displays, press the Menu soft key
and select MEdia Mall ➔ Shop Videos to launch the built-
in browser and select a video to download.
2. Follow the on-screen options. The downloaded videos can
be stored in the Videos folder found within the My Stuff
(Phone) location. These files can be included into
multimedia messages or sent as attachment files to text
messages if they do not exceed message limits.
3. Select an application file entry.
4. When you are ready to purchase the application, press the
Buy Now button to complete the transaction.
93
Section 11: AT&T Music
AT&T Music is a music service that provides you access to
Streaming Music, Music Videos, Music store, Music
communities, Music applications, and a unique MusicID
application.
Note: Audio files smaller than 300 KB are treated as ringtones, whereas
audio files larger than 300 KB are stored in the Music Folder.
You can not assign an MP3 file larger than 300 KB as a ringtone.
Music Player
This feature allows you to access music, recorded audio or
playlists, and then play them through a built in Media Player.
•
Transfer music files from a personal computer using a media player
application and an optional USB Data Cable and an optional microSD
Memory Card.
TM
Accessing AT&T Music
1. When the Idle screen displays, press the Menu soft key,
Note: When the Bluetooth feature is active on your handset, USB
communication is not be available. To transfer files to your handset,
turn off the Bluetooth functionality (Settings
➔
Connectivity
➔
then select AT&T Music
➔
Music Player.
Bluetooth
➔
page 84.)
2. Use the Up or Down Navigation key to scroll through the list
Using the Music Player
of available options.
The Music Player is an application
that can play music files. The music
player supports files with extensions
AAC, AAC+, eAAC+, MP3, WMA, 3GP,
MPEG, MP4, and M4A. Launching the
Music Player allows you to navigate
within your Music folders and select
playback material.
Adding Music to your Handset
Music files (such as ringtones) can be added to your handset by
using one or more of the following methods:
•
Purchase and download music and ringtones directly to your handset
over your wireless carrier’s network by using the AT&T Music – Shop
Music feature (also accessible from My Stuff).
AT&T Music
94
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music
2. Highlight Music Player and press the Select soft key or
the key.
Playing Music through a Stereo Bluetooth Device
.
Your device supports the Stereo Bluetooth profile (A2DP) that
when connected to a stereo Bluetooth headset will play back
music in stereo.
1. Pair and connect your handset to a stereo Bluetooth
3. Use the Up or Down Navigation key to highlight a folder
from the folders available.
4. Press the Select soft key to access the music in the folder
and to begin playing the first song. Alternately, you can
press the Right Navigation key to access the music, and
start the music.
2. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player ➔ All Music.
3. Select a song to play it within the Music Player.
4. During playback, press the Options soft key. Highlight
Note: The maximum number of songs you can synchronize between your
Transfer to Bluetooth Stereo headset and press
The headset will then search for compatible stereo
bluetooth devices.
.
phone and your PC is 1500.
Playing Music Transferred to the Handset
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player.
5. From the list of compatible devices, select the previously
paired bluetooth headset to begin listening to your song
through the headset.
2. Highlight All Music and press
to open the folder.
Playing Music while Using the Phone
Note: All Music will show all songs both downloaded to the phone and those
stored on the phone or microSD™ card.
The Music Player allows you to play music in the background
while performing other tasks on your phone. The music will
3. Select the song you want to listen to.
95
pause when an incoming call is accepted, and the music will
resume when the call is ended. Music will continue to play when
you receive a Text Message, Multimedia Message, or an Instant
Message.
3. Once the music starts to play you will see the music icon
on the top of the display (
). Press the Options soft key,
then select Hide Player.
4. Press the End key to return to idle mode.The Music Player
The other functions you can use are:
then appears as the center soft key option.
•
•
Call: make or receive a call (music player is paused)
Messaging: send or receive a text or multimedia message. Music
continues to play unless an audio clip is received as a part of a
multimedia message.
5. To go to the previous song, press the Rewind
(Left
Navigation key), to temporarily stop the music press Pause
(Center
key), and to go to the next song press the
•
•
MEdia Net: browse the web (music continues to play).
Music Player: turns on Music Player, or allows you to use full-screen
controls of the music player.
Fast Forward
(Right Navigation key). Icons are
displayed above the soft key functions.
•
Games and Apps: lets you play games or access applications while
listening to music.
After the Music Player has been enabled, you can listen to music
in the background while performing other phone functions.
Note: Playing music and pausing the music player uses the same amount of
Important!: When you are finished using the Music Player function, you
battery.
must press the
key to stop the function to prevent the
battery from losing its charge. Pausing the player will continue
to use the battery.
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player.
Using Playlists
2. Select your option using the Up and Down Navigation keys
and find the music you want to play from the various music
folders.
Playlists are used to assign songs to a list of preferred media
which can then be grouped into a list for later playback. These
Playlists can be created via either the handset’s Music Player
AT&T Music
96
options menu or from within a 3rd party music application (such
as Windows Media Player) and then downloaded to the handset.
3. Highlight music files and press
to select them. The
Playlist screen lists all of the available music files on the
handset.
Creating a Playlist
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player.
You can choose to add either individual songs, multiple
songs, or All available songs. All selects all of the available
listed songs and marks them for addition to the playlist.
2. Select Playlists ➔ New Playlist.
3. On the Add Tracks screen, select the method by which you
will start adding tracks to the Playlist. You must add at
least one track and name the Playlist initially.
4. Press the Add soft key and wait for the song to be added to
the current playlist.
Remove songs from a Playlist
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player ➔ Playlists.
4. To continue creating the Playlist, select the playlist you just
created, and then press the Options soft key to Shop
Music on the browser, or Add Tracks to continue adding
music from your phone or memory card.
2. Highlight the previously created playlist, press the Options
soft key, then select Remove Tracks.
5. Press the Save soft key to name and store this playlist as a
3. Highlight an audio file (or multiple files) and press
to
separate file within the main Media Player directory.
select it.
Adding Songs to a Playlist
1. When the Idle screen displays, press the Menu soft key,
then select AT&T Music ➔ Music Player ➔ Playlists.
4. Press the Remove soft key.
Shop Music
AT&T Music can be used to shop for ringtones, Answer Tones™
and songs from some of your favorite music stores.
2. Highlight the previously created playlist and press the
Options soft key, then select Add Tracks.
1. When the Idle screen displays, press the Menu soft key,
97
then select AT&T Music ➔ Shop Music.
4. Use the USB adapter cable to connect the handset to the
target PC. When an active connection has been
2. Select your music store of choice (or select Ringtones).
established, a USB icon (
) appears on the phone.
3. From the Categories listing, select the desired entry. Press
5. Once the USB connection has been established, the
handset displays “Connected” and the computer screen
then shows your device. If the detection occurs, skip to
step 8.
the Back soft key to return to the previous page.
To exit the browser at any time, simply press
.
Transferring Music from the Digital Music Stores
In order to download music from the computer to your handset, a
microSD™ card and USB data cable are required. These items
are sold separately; go to www.wireless.att.com/cell-phone-
service/accessories/.
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, please follow
steps 6 - 9.
1. Using your computer, open your preferred Windows Media
Digital Rights Management (WMDRM) PC music
management client.
6. When the Idle screen displays, press the Menu soft key,
then select Settings and press the Select soft key or the
key.
2. Download the selected song to your library.
7. Select Connectivity ➔ Select USB Mode ➔ Media
Player.
Note: If the music file is protected, Media Player will block the playing or
synching of that file.
8. Highlight the song you wish to download to the handset.
9. Using your right mouse button, click on the highlighted
song and select Transfer Track(s) to Portable Device
from the drop-down menu. This step begins the download
process.
AT&T Music
98
Note: The Music Player does not necessarily support all features of a
particular file format nor all the variations of those formats. The Music
Player includes support for Windows Media Digital rights Management
(WMDRM) which allows you to play some purchased or subscription
content. Copyright protections may prevent some images, music
(including ringtones) and other content from being copied, modified,
transferred or forwarded.
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, see
Note: The following steps reflect the procedure used with Windows Media
Player 10. If you are using some other form of media player, or a later
version of Windows Media Player, you should refer to the application’s
Help files for specific directions.
Transferring Music using a Media Application
A USB cable, microSD™ card, and a current version of a media
application (such as Windows Media Player) are required for this
procedure.
4. From within the Windows Media Player application, click
on the Sync tab. Previously downloaded songs are then
listed on the left side of the application.
1. Open the media player on your personal computer (if you
are using Windows Media Player, use version 10.0 or
higher).
5. Choose the destination location for the media files. The
SGH-A637 - Phone and SGH-A637 - Card entries both
appear in a drop-down list on the right side of the screen.
This selection determines whether the audio files will be
synchronized with the Phone or with the inserted memory
card.
2. Use the USB Data Cable (sold separately) to connect the
handset to the target PC. When an active connection has
been established, a USB icon (
phone.
) appears on the
3. Once the USB connection has been established, the
handset displays “Connected” and the computer screen
then shows your device.
Note: If there are no items present in the playlist, click the Edit Playlist
button and begin adding the music files from among the various media
categories.
99
6. Click on the checkmark boxes (to the left of the song entry)
to select the song you want to synchronize to your
handset.
3. Once the USB connection has been established, the
handset displays “Connected” and the computer screen
then shows the A637 device.
7. Click the Start Sync button at the upper right corner of the
application to download the selected songs to your
handset. A “synchronization in progress” message
appears on the application. Do not unplug the handset
during this process. Once complete, a Music folder
appears below the device entry on the right of the Sync
tab.
Note: If the target computer does not detect the newly connected handset or
provide an MTP Player dialog window on the PC screen, see
4. From within the Windows Media Player application, click
on the Library tab.
5. From the left side of the Library tab, click on All Music.
The right side of the page is then populated with all of the
songs which the player has previously found.
8. It is now safe to unplug the USB connector from the
handset.
6. Right click on the song entry and select, Add to.. ➔
Importing a Playlist from Windows Media Player
1. Open Windows Media Player on your computer (version
10.0 or higher).
Additional Playlists.
7. From the Add to Playlist dialog, click the New button and
type in a unique playlist name.
2. Use the USB adapter cable to connect the handset to the
8. Click OK when you are done entering the new playlist
name. The new Windows Media playlist is then displayed
within the My Playlist section of the Library tab (left side).
target PC. When an active connection has been
established, a USB icon (
) appears on the phone.
AT&T Music
100
9. Drag and drop the newly created playlist from the My
Playlist section to the A637-Phone or the A637-Card
entry listed just above it.
•
manage IDs: provides a list of recently identified song and allows
you to obtain information about the song, delete the song, or send
the Music ID as a link to another phone number.
•
•
help me out: provides you with on screen descriptions of several
key MusicID features.
The A637-Phone and A637-Card entries both appear on
the left side of the screen.
exit: allows you to exit the application and return to the main AT&T
Music menu.
Note: If there are no items present in the playlist, click the Edit Playlist button
and begin adding the music files from among the various media
categories.
To exit the application at any time, simply press
.
Using ID song!
1. Highlight ID song! and press
.
10. It is now safe to unplug the USB connector from the
2. Place the handset’s microphone up to the source of the
song, which can be from either a radio, stereo, or headset.
The handset then begins to analyze the audio signal. If a
song match is found, the screen displays the Artist Name,
Track Title, and Album cover art.
handset.
Using MusicID
MusicID is an application which uses the onboard microphone to
analyze a song sample and then compare it to a remote database
of songs. Once the application completes the analysis of the song
sample, it then provides you with the name of the song, artist and
album art as well as opportunities to buy related content.
3. To purchase the song (with ringtone and wallpaper if
available), select get:.
1. From the Idle screen, press Menu ➔ AT&T Music.
4. To share the song ID with another user, select Share ID.
Enter the recipient’s phone number and press the
ShareID! soft key. Within a short time they will receive a
message containing a Music ID link to the song.
2. Select MusicID. You are then presented with a list of ID
options:
•
ID song!: begins the analysis of the song being sampled through
the handset’s microphone.
101
5. If the song can not be found, the handset displays a “Sorry,
No Match Try Again!” message. Press the newID! soft key
and try analyzing the song again.
•
ID Picks and More!: describes the process following the
successful identification of a song. You can choose to purchase the
song and wallpaper (if available) or send the musicID as a link to
another phone number.
•
•
Subscription: provides details about the general usability and
To exit the application at any time, simply press
.
monthly term information.
Using Manage IDs
1. Select manage IDs. The screen displays a list of the most
About MusicID: provides information about the MusicID software
version.
recent successful song IDs which were made.
Exiting from the Music ID Application
2. Highlight a song and press the Options soft key.
There are two ways to exit from the musicID application:
1. Highlight exit and press
to select a topic.
3. Select one of the following options:
2. Exit the application at any time by simply pressing
.
•
•
•
ID Info: displays the Artist Name, Track Title, and Album cover art
of the identified song.
Using XM Radio
This service allows you to stream over 25 channels of
commercial free music through your handset.
Delete ID: deletes the selected song from the list of identified
songs.
New ID!: begins the song analysis process again. Hold the
microphone to the song source and wait for analysis.
Note: Since this product uses a large amount of data in its stream process,
you should note that you are responsible for all data charges incurred.
It is recommended that you subscribe to a MEdia Max data bundle so
that you are not charged for data overages.
To exit the application at any time, simply press
.
Getting Help with Music ID
1. Select help me out. The screen displays a list of helpful
topics related to the musicID application. These topics
cover:
Note: MobiRadio does not work with Bluetooth. Periodically, the application
will ask the customer to confirm they are still listening to the stream.
•
IDing a Song: provides information about the analysis process.
1. From the Idle screen, press Menu ➔ AT&T Music.
AT&T Music
102
2. Select XM Radio.
Music Video Options
The options for the Music Video page are identical to those
options provided for within the Cellular Video homepage. (For
3. Use the Down Navigation key to scroll through the
following list of available Menu options:
4. Press the Continue soft key to accept the terms of the XM
1. From the Idle screen, press Menu ➔ AT&T Music.
Radio service and follow the on screen prompts.
2. Select Music Videos.
5. Select a radio station category from the guide list.
3. From the main Music Video homepage, press the Options
6. Select a specific radio channel to start the music
soft key.
streaming to your phone.
Viewing a Video Clip
1. Select the video clip.
Accessing Music Videos
The Music Videos homepage is a component of the Cellular Video
service. This page provides you with links to some of the most
popular multimedia content.
2. After the stream has been buffered into memory, you can
choose to either Pause or play the content. Pressing
toggles the Play and Pause functionality.
1. From the Idle screen, press Menu ➔ AT&T Music.
Using The Buzz
2. Select Music Videos. You are then taken to your CV Music
homepage.
This service allows you to navigate through Top 20 chart songs
(in a variety of categories). Other features of this service include
streaming entertainment news about your favorite music artists,
access to an artists main page (containing discographies,
ringtones, concert dates,etc.), concert information, games, and
setup options for your own personal billboard notifications.
3. Select the desired media clip or select from one of the
available categories.
1. From the Idle screen, press Menu ➔ AT&T Music.
103
2. Select The Buzz.
•
ARTISTS: features a personalized artist web page for an available
artist which includes a bio, discography info, ringtones, tour dates,
etc.
3. Press the Trial soft key to accept the terms of the trial
period. You have only a few days to use the service before
the trial period expires. If at any time you wish to purchase
a subscription to this service, press the Buy soft key and
follow the on screen prompts.
•
•
•
CONCERTS: allows you to search for a concert by using either the
artist name, venue, type, or city/state/zip information.
GAMES: allows you to use your keypad to play an entertainment-
based guessing game by entering in names, dates, and places.
MY BILLBOARD: allows you to refine your Billboard mobile
experience by configuring your text message preferences, personal
settings, and alerts.
4. Enter an area code, phone number (without dashes), and
Zip code into the appropriate fields on the Customize
screen. Use the Up or Down Navigation key to switch
between fields.
7. Exit the application at any time by simply pressing
.
Music Community
This Community is a place where you can find a listing of various
fan sites that provide sound clips, wallpapers, bios,
discographies, and other information about an artist.
5. Press the Done soft key to accept and save your
information.
6. Once the phone number has been successfully registered,
press the OK soft key to continue onto the main Billboard
mobile menu where you are given a list of categories to
choose from:
1. From the Idle screen, press Menu ➔ AT&T Music.
2. Select Community.
3. Select a fan site.
To exit the application at any time, simply press
.
•
CHARTS: provides you with a top 20 list of popular Ringtones, and
tunes such as R&B/Hip Hop, Rock, Pop, Latin, Country, and Rap.
Music Applications
The Music Applications option accesses the internet to provide
Music tools for your handset. Services provided on this site may
•
NEWS & REVIEWS: provides you with links to some of the latest
news about your favorite artists.
AT&T Music
104
include, Music ID, MobiRadio, Billboard Mobile Channel, MobiTV:
Live TV, and MobiTV en Español.
1. From the Idle screen, press Menu ➔ AT&T Music.
2. Select Music Applications.
3. Select a music site.
105
Section 12: Applications
The on-board applications (such as camera, camcorder,
calendar, and alarms) can be supplemented with additional
applications which can be purchased through the AT&T Mall.
3. To take the photo, press
.
Note: Your camera produces photos in JPEG format. The number that
appears in the lower-left of the screen indicates the current number of
pictures have been saved to the selected media and an approximate
number of total pictures which can be taken at the current image size.
ᮣ
When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools.
Tools
4. Or before taking the photo, use the Navigation keys to
Tools are feature options that allow you to use your handset for a
variety of non-phone related activities. To access any of the tools,
perform the following:
access camera option icons.
5. Once the photo has been taken, press
to attach the
photo directly to a message.
ᮣ
When the Idle screen displays, press the Menu soft key,
6. Press the Camera key to return to the picture viewer.
then select My Stuff ➔ Tools.
7. You can use the keypad to quickly change the camera
Using the Camera
Taking Photos
options using the camera shortcut keys.
Camera Options
Note: When taking a photo in direct sunlight or in bright conditions, shadows
Camera options are represented by icons across the top of the
may appear on the photo.
screen. To access the options, press the
Camera mode icon becomes highlighted.
soft key. The
1. In Idle mode, press and hold the Camera key on the right
side of the phone.
Use the Navigation keys to highlight the desired option icon and
the preferred value. To save your selection, press
.
2. Adjust the image by aiming the camera at the subject.
Applications
106
The icons are defined in the following:
1280
960
Photosize:allowsyoutosetthesizeoftheresultingphoto.
Options are:
• 1280x960 (results in a 1.3M size)
• 640x480
• 320x240
Camera mode: allows you to take a photo in various
modes. Once you change the mode, the corresponding
indicator appears at the top left of the display.
Shooting mode: allows you to set the shooting mode.
Options are:
White Balance: allows you to set the white balance for the
camera.ChooseAuto,Daylight,Incandescent,Fluorescent,
or Cloudy.
• Single Shot: allows you to take a single photo and
view it before returning to the shooting mode.
Effects: allows you to choose a custom color tone for your
photo. Choose from the following:
• Multi-Shot: allows you to take a succession of
consecutive photos.
• No Effects: automatically adjust the picture for the
best quality available.
• Mosaic Shot: allows you to take up to four photos and
then have them grouped together into a single final
photo.
• Black & White: removes all color and display the
picture as greyscale/black and white.
• Frame Shot: allows you to choose a custom frame
border for your. Choose from one of the 20 available
frames.
• Sepia: adds a sepia tint to the picture. This is the
common orange tint that was popular in early
photography.
• Panorama: allows you to take a panoramic still shot.
• Negative: changes the image to a negative image
display.
107
Timer: allows you to set a time delay before the camera
takes the photo.
• Off
Settings: allows you to customize your camera settings.
Choose the following options:
General:
• 3 sec
• Shutter Sound: allows you to select a shutter tone
• 5 sec
sound when taking a photo.
• 10 sec
• Default Storage: allows you to set a default storage
location for the photos taken on your phone. Choose
Phone or Memory Card.
Night Shot: automatically adjusts lighting for nighttime
photos.
Camera:
Shortcuts: allows you to view the currently specified
shortcuts for Camera/Camcorder mode.
HELP
• Quality: allows you to select the picture quality
setting. Choose High, Normal, or Economy.
• Single Shot Mode: allows you to select between Take
and Review or Take and Preview.
Camcorder:
• Quality: allows you to select between High, Normal, or
Economy.
• Movie format: allows you to choose the default movie
format, either MP4, 3GP, or Video Share.
Applications
108
Camera Options after a Photo is Taken
Selecting and Using the Graphics Folder
After you have taken a photo, you can access various options by
using the soft keys to select an icon. Highlight an option and
If you enter the Graphics folder through menu options, and press
the Options soft key before selecting an existing graphic, the
following options list:
press
.
•
Download: takes you to the WAP browser so that you can shop and
download graphics.
Selecting the left icon
gives you the following options:
Take photo: allows you to go back to the camera and take another
•
•
•
•
•
•
Take Photo: allows you to go back to the camera and take a picture.
Create Folder: allows you to create subfolders under the Graphics
folder in which to store pictures that you take.
photo.
Send: allows you to attach the graphic to a message, send it to a
Bluetooth device, or send it to HP’s Snapfish
®
.
Set as: allows you to set the photo as your Wallpaper or set the photo
as a Caller ID for a contact.
If you select a graphic but do not press the
options are available:
key, the following
Rotate: allows you to rotate the image from Portrait to Landscape.
•
•
View: allows you to view the photo.
Send: allows you to attach the graphic to a message, send it to a
Selecting the center icon
photo via Message, Bluetooth, or HP’s Snapfish
gives you the option to send your
®
®
Bluetooth device, or send to HP’s Snapfish
.
.
•
Set as: allows you to set the currently selected graphic to be displayed
as your Wallpaper, or you can assign it to a Caller ID.
Delete: allows you to delete either Selected or Multiple.
Rename: allows you to rename the selected graphic.
Move: allows you to move either a Selected or Multiple graphics to one
of the My Stuff (Phone) folders.
Selecting the right icon
gives you a Delete? prompt. Use the
and the right soft key to answer to the
left soft key to answer
prompt.
Y
N
•
•
•
Accessing the Graphics Folder
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Graphics.
•
Copy: allows you to make a copy of the Selected or Multiple graphics
and then send it to one of the My Stuff (Phone) folders.
2. Highlight a photo.
3. To open the photo, press
109
.
•
•
•
Take photo: allows you to go back to the camera and take another
photo.
•
Edit: allows you to edit the photo reloading the photo in edit mode and
bringing up a set of options consisting of:
- Save as: allows you to change the name of the image.
- Effects: allows you to choose effects such as Black and White,
Sepia, Negative, Milky, Lighting, Crayon Pastel, Oil Paint, Blur,
Despeckle, or Sharpen.
- Partial Effects: allows you to choose a partial effect such as
Partial Blur or Redeye Repair.
- Adjust: allows you to make adjustments on the Brightness,
Contrast, or Color of the photo.
- Transform: allows you to Resize, Rotate, or Flip the photo.
- Crop: allows you to move the Navigation key to select the
portion of the image you want to crop.
- Insert: allows you to add Frames, Cliparts, Emoticon, or Text to
a photo.
Create Folder: allows you to create a new folder and then populate it
with either Selected or Multiple graphics from the list.
More: allows you the following options:
–
–
–
–
–
Lock/Unlock: allows you to lock/unlock the photo. Lock prevents the
photo from being deleted, unlock releases it so that it can be deleted.
Bluetooth Visibility: allows you to select either Selected or Multiple
graphics visibility to Bluetooth devices.
Sort by: allows you to sort the list of graphics by either: Name, Date,
Size, or Type.
Print via: allows you to make a selected graphic printable by either USB
or Bluetooth printer.
Properties: allows you to view the properties of a photo.
Editing a Photo
- Send: allows you to send the photo using a Multimedia
®
Once you have selected and loaded a photo, the following options
are available for editing and management of the photo.
Message or Bluetooth device, or send to HP’s Snapfish
.
- Set as: allows you to set the photo as wallpaper, or assign it to a
Caller ID
.
•
•
Zoom: allows you to zoom in on the image or zoom out.
- Print via: allows you to print the photo using a USB or Bluetooth
connection.
Send: allows you to attach the graphic to a message, send it to a
®
Bluetooth device, or send it to HP’s Snapfish
.
•
More: allows you the following options:
•
Set as: allows you to set the photo as wallpaper, or assign it to a Caller
ID.
–
Slide Show: allows you create a slide show of graphics in your
Graphics folder.
•
•
Delete: allows you to delete the photo you have taken.
Rename: allows you to rename the photo.
Applications
110
–
–
–
–
Lock/Unlock: allows you to lock/unlock the photo. Lock prevents the
photo from being deleted, unlock releases it so that it can be deleted.
Bluetooth Visibility: allows you to make the graphic visible to Bluetooth
devices.
Print via: allows you to make a selected graphic printable by either USB
or Bluetooth printer.
•
•
•
Copy: allows you to make a copy of the Selected or Multiple graphics
and then send it to one of the My Stuff (Phone) folders.
Create Folder: allows you to create a new folder and then populate it
with either Selected or Multiple graphics from the list.
More: includes the following:
–
Lock/Unlock: allows you to lock/unlock the video file to prevent
deletion. Lock prevents the video clip from being deleted; Unlock
allows the video clip to be deleted.
Properties: allows you to view the properties of a photo.
Using the Gallery
–
–
Bluetooth Visibility: allows you to select either Selected or Multiple
graphics visibility to Bluetooth devices.
The Gallery option of the Camera/Camcorder mode allows you to
access the list of previously taken photos or videos. The Gallery
is another method of accessing the Graphics folder but only
shows the photos or video clips taken using the handset.
Sort by
:
allows you to sort the list of graphics by Name, Date, Size or
Type.
–
–
Print via
Properties
: allows you to view the properties of a photo.
If you select
viewfinder, the following options are available:
to view the list of photos from the camera
:
allows you to view the properties of a photo.
Using the Camcorder
Shooting Video
•
•
View: allows you to view the photo.
Send: allows you to attach the graphic to a message, send it to a
Bluetooth device, or send to HP’s Snapfish
®
.
Tip: When shooting video in direct sunlight or in bright conditions, it is
recommended that you provide your subject with sufficient light by having the
light source behind you.
•
Set as: allows you to set the currently selected graphic to be displayed
as your Display Wallpaper, or you can assign it to a Caller ID.
Delete: allows you to delete either Selected or Multiple.
Rename: allows you to rename the selected graphic.
Move: allows you to move either a Selected or Multiple graphics to one
of the My Stuff (Phone) folders.
•
•
•
1. In Idle mode, press and hold the Camera key on the right
side of the phone.
111
2. Press
also go to the Menu icon
across the top of the display, and use the Navigation keys
to select the icon, and then the Camcorder option
twice to switch to the camcorder. You may
message “Video Sharing has been Stopped. Save the
Recorded Video?” You can select either Yes soft key or
No soft key to save the file. You can then continue the call
or terminate it.
, which activates the icons
from the dropdown list.
6. Once the file has been saved, press
to play back your
3. Adjust the image by aiming the camcorder at the subject.
video for review.
4. Press
to begin shooting video.
7. Press
to return to the viewer.
5. Select the Stop icon to stop the recording and save the
8. You can use the keypad to quickly change the camcorder
video file to your My Stuff folder.
- OR -
options using the shortcut keys.
Camcorder Options
Before shooting, select the Menu icon
to access
Camcorder options are represented by icons across the top of the
camcorder options and select Video Share. Video Share
allows you to make a Video Share call by displaying a
screen where you can input the number of a recipient that
also has Video Share. You can select from your Contact list
screen. Select the Menu icon
options, and then use the Navigation keys to access the various
choices for each icon.
to access the camcorder
or enter the number directly. Press the
key to initiate
the call. (This option will only display if you have the Video
Share service.) If the recipient accepts the Video Share
call, you continue using the camcorder as usual. Press the
Stop soft key to end the Video Share session. You will get a
Applications
112
The icons are defined in the following:
Effects: allows you to choose a custom color tone for your
video clip. Choose from the following:
Camcorder mode: allows you to switch from taking a
photo to shooting a video clip using the camera’s
camcorder mode.
• No Effects: automatically adjust the video for the best
quality available.
• Black & White: removes all color and display the
video as greyscale/black and white.
Shooting mode: allows you to set the shooting mode.
Options are:
• Sepia: adds a sepia tint to the video clip. This is the
common orange tint that was popular in early
photography.
• Normal: records video clip in Normal mode.
• Negative: changes the video image to a negative
image display.
• Multimedia Message: records a video clip that has a
size limit that will transmit in a Multimedia Message.
Timer:allowsyoutosetatimedelaybeforethecamcorder
takes the video clip.
• Off
176
144
Video clip size: indicates the recording size of the
resulting video clip is 176x144.
• 3 sec
• 5 sec
• 10 sec
White Balance: allows you to set the white balance for the
camcorder. Choose Auto, Daylight, Incandescent,
Fluorescent, or Cloudy.
Record Audio: allows you to turn On/Off recording audio
with the video clip.
113
Camcorder Options after a Video is Taken
Shortcuts: allows you to view the currently specified
HELP shortcuts for Camera/Camcorder mode.
After you have shot a video, you can use various options that
appear as icons on the screen. Use the left and right soft keys
and the
key to navigate through the options.
Settings: allows you to customize your camera settings.
The following options are available on the Options
icon:
Choose the following options:
•
•
Record video: allows you to record another video clip.
General:
Send via: allows you to attach the video to a Multimedia Message or
send it to a Bluetooth device.
• Shutter Sound: allows you to select a shutter tone
sound when taking a photo.
The right soft key initially saves the video. After it has been
saved, pressing it again gives you a Delete? prompt. Use the left
soft key to answer
prompt.
• Default Storage: allows you to set a default storage
location for the photos taken on your phone. Choose
Phone or Memory Card.
Y
and the right soft key to answer to the
N
• Camera:
Accessing the Video Folder
• Quality: allows you to select the picture quality
setting. Choose High, Normal, or Economy.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Videos.
• Single Shot Mode: allows you to select between Take
and Review or Take and Preview.
2. Select a video file.
3. To play the video, press
. The file is played in the
• Camcorder:
Media Player application.
• Quality: allows you to select between High, Normal, or
Economy.
Options available when you access the video clip, but before you
select it to play:
• Movie format: allows you to choose the default movie
format, either MP4, 3GP, or Video Share.
•
Play: uses the Media Player to view the video segment.
Applications
114
•
Send via: allows you to attach the video to a Multimedia Message or
send it to a Bluetooth device.
•
Send via: allows you to send the video clip via a multimedia message
or a Bluetooth device.
•
•
•
•
•
Delete: allows you to delete the Selected video or Multiple videos.
Rename: allows you to rename the video file.
Move: allows you to choose the Selected or Multiple videos to move.
Copy: allows you to copy a selected or multiple videos.
Record Video: allows you to return to the Camcorder to record a new
video clip.
•
•
Landscape: allows you to rotate the video to landscape format.
Properties: allows you to view the properties for this video file.
Once the video completes playing, or you select the Stop option,
the following options are available:
•
•
Play: allows you to replay the video clip.
Send via: allows you to send the video clip via a multimedia message
or a Bluetooth device.
•
•
Create Folder: allows you to create a folder within My Stuff.
More: includes the following:
•
Properties: allows you to view the properties for this video file.
–
Lock/Unlock: allows you to lock/unlock the video file to prevent
deletion. Lock prevents the video clip from being deleted; Unlock allows
the video clip to be deleted.
Video Share
–
Bluetooth Visibility: allows you to make the Selected or Multiple
videos visible to Bluetooth devices.
Record Audio
–
–
Sort by: allows you to sort video clips by Name, Date, Size or Type.
Properties: allows you to view the properties for this video file.
Record Audio allows you to record voice memos. It also allows
you to send your audio clip to other people as an attachment of
an MMS message. Recording time is limited to free memory
space available.
Once you have selected the video to play, your options are:
•
Pause/Resume: allows you to pause the video being played, and then
resume playing.
1. When the Idle screen displays, press the Menu soft key,
•
•
Stop: allows you to stop the video being played.
Jump to Track Time: allows you to jump ahead to a specific time in
the track.
then select My Stuff.
115
2. Highlight the Tools folder, press the Select soft key or the
•
•
Send via: allows you to send your voice clip to other people by
using a message or to a Bluetooth device.
key, then select Record Audio and press the Select
Set as: allows you to set the audio file as a call ringtone, a ringtone
for a specific caller, or an alarm tone.
soft key or the
key
3. To start recording, press
. Record a memo by speaking
•
•
Delete: allows you to delete the memo.
into the microphone. Options available before an audio
recording is made are:
More: gives you the following options:
–
–
Rename: allows you to change the memo’s name.
Lock/Unlock: allows you to lock/unlock the Audio file. Lock prevents
•
•
•
Record: allows you to start recording an audio clip.
the audio file from being deleted, Unlock allows it to be deleted.
My Voice Clips: allows you to listen to your audio clips.
–
–
Bluetooth Visibility: allows you to make the audio file visible to a
Bluetooth device.
Record Audio Settings: allows you to set up a recording preset:
Default Name and Recording Time (1 minute, 2 minutes, 3
minutes, 4 minutes, 5 minutes, 60 minutes, or Limit for MMS).
Properties: displays the Name, Size, Format, Duration, Forwarding,
Creation Date and Time, and Location of the voice memo.
4. Press the Stop soft key to stop the recording or pause the
recording by pressing . Once the audio recording is
6. To exit, press the Back soft key or press
.
Recorded Audio Folder
stopped, the message is automatically saved.
This folder shows a list of audio clips that have been recorded
and saved. To access this folder, use the following steps:
5. Press the Options soft key to display the following options:
•
•
Play: allows you to play the memo.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Audio ➔ Recorded Audio. A list
of voice memos displays.
Record: allows you to save the current memo and begin another
session.
•
•
My Voice Clips: allows you to listen to your audio clips.
2. Select a recorded memo.
Record Audio Settings: allows you to set up a recording preset:
Default Name and Recording Time (1 min, 2 min, 3 min, 4 min, 5
min, or 60 min, Limit for MMS).
Applications
116
3. To play a recording, press the Options soft key and press
Play, or press
4. To exit, press the Back soft key or press
Alarms
This feature allows you to:
2. Select an alarm type and press the Options soft key or
press . The options available are: Select and Create
Alarm. Use the Navigation keys to highlight the alarm, and
press
3. Set the following options:
.
.
.
•
Name: allows you to use a specific name for the alarm. The name
will appear on the display when the alarm activates. Does not
appear if the alarm type is Wake-up Alarm.
•
•
set the alarm to ring at a specific time.
set the phone to switch on automatically and ring the alarm even if the
phone is switched off.
•
•
Alarm Activation: use this to activate/deactivate this feature (On/
To set the alarm:
Off). The only way to edit the remaining fields is to select On
.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Alarms. The following
options display:
Alarm Time: use the alphanumeric keypad enter a time for the
alarm to sound.
•
Wake-up Alarm: the alarm rings to wake you up at the specified
time.
•
Alarm Type: press the
key to select a new type of alert
notification (Melody, Increasing Melody, Vibration, Vibration then
Melody, Vibration & Melody, or Vibration & Increasing Melody)
•
•
•
•
•
Alarm 1: primary alarm setting.
Alarm 2: secondary alarm setting.
Alarm 3: third alarm setting.
Alarm 4: fourth alarm setting.
•
•
•
Alert Tone: press the
Stuff folders.
key to select a tone from one of the My
Alarm Volume: press the Left and Right Navigation key to adjust
the volume level (1-7).
Auto Power-up: the alarm rings even when the phone is turned
off.
Recurrence: use the Up or Down Navigation key to highlight a
occurrence of the day(s) you wish your alarm to sound. Press the
117
key to select the day entry. Press the OK soft key to save your
settings.
Calendar
The calendar feature allows you to view the Month, Week, and
Day layout views. You can also create an Appointment,
Anniversary, Holiday, Important, or Private entries. It also shows
any Missed Alarm Events that have occurred.
•
•
Snooze: use this option to set the snooze feature for the alarm (Off,
1 Min, 3 Min, 5 Min, 7 Min, or 10 Min)
Repeat: use this option to set the number of times this alarm can
be repeated (1 Time, 2 Times, 3 Times, 5 Times, or 10 Times).
Snooze must be active for this feature to be enabled.
To access the Calender menu, use the following steps:
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Calendar.
4. Press
to save these changes.
Note: To stop the alarm when it rings, press any key. Press the OK soft key to
turn off the alarm.
2. Press the Options soft key. Select Create. The following
options are available:
Setting Auto Power-up Alarms
• Appointment
You can set the phone to ring the alarm when the time for an
alarm comes, even if the phone is switched off.
• Anniversary
• Holiday
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Alarms ➔ Auto Power-
up.
• Important
• Private
3. Other options for the Calendar include:
2. Highlight On and press the Select soft key or press
to
•
Settings: this option allows you to configure the Calendar’s
Starting Day and Default View Mode.
activate the Autopower feature.
•
•
Missed Alarm Event: this option displays any missed events.
If the menu option is set to Off, and the phone is switched
Used Space: this option displays a list of the different Calendar
event categories along with the memory allocation for each.
off at the specified time, the alarm does not ring.
3. When you have finished, press
.
Applications
118
Appointment
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Calendar.
•
•
Alarm Tone: allows you to choose an alarm tone. Once
highlighted, press the key to select this audio file.
Repeat: allows you to set the number of repetitions allowed for this
appointment (Daily, Weekly, or Monthly). Press the key to
select this option. Once selected, all remaining alarm settings are
enabled.
2. Press the Options soft key, then select Create ➔
Appointment to use the following options:
–
–
–
Every: allows you to set the number of times the entry is to repeat in the
selected time frame.
•
•
Title: enter a title for this appointment (up to 15 characters).
Details: enter a description for this appointment (up to 100
characters).
Except Weekends: allows you to exempt non-work days (weekends)
from the appointment schedule.
•
•
Start Date: enter a date for this appointment to begin.
Until: allows you to set as duration for this appointment by assigning an
expiration date).
Start Time: enter a time for this appointment to begin. Use the
Right Navigation key to select AM or PM for the start time of the
scheduled event.
3. When you have finished, press
to save this new
appointment entry.
•
•
End Date: enter a date for this appointment to end.
Anniversary
End Time: enter a time for this appointment to end. Use the Right
Navigation key to select AM or PM for the end time of the
scheduled event.
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Calendar.
•
•
Location: enter a location description for this appointment (up to
2. Press the Options soft key, then select Create ➔
15 characters).
Anniversary to use the following options:
Alarm: allows you to set an alarm for this event. Press the
key
to select this option. Once selected, all remaining alarm settings are
enabled.
•
•
•
Title: enter a title for this occasion (up to 15 characters).
Details: enter details for the occasion (up to 100 characters).
Date: enter a date for this anniversary to begin.
–
Before: allows you to set the amount of time (min., hour, day) before
your appointment, you wish the alarm to sound.
119
•
Alarm: allows you to set an alarm for this event. Press the
to select this option. Once selected, all remaining alarm settings are
enabled.
key
Viewing an Event
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Calendar.
–
–
–
Before: allows you to set the amount of time (day, week) before your
appointment, you wish the alarm to sound.
The calendar displays with today’s date highlighted. If an
Alarm Time: allows you to enter a time for the alarm to begin notifying
alarm or alarms are set, the
line above the Calendar.
icon displays on the icon
you of the occasion. Use the Right Navigation key to select AM or PM
Alarm Tone: allows you to choose an alarm tone. Once highlighted,
press the key to select this audio file.
.
2. Select the date of the event (s) you want to view and press
or use the Navigation keys to move to the date with an
assigned event.
•
Repeat Every Year: allows you to set whether this entry is
repeated on a yearly basis. Press
to select this option.
3. When you have finished, press
to save this new
anniversary entry.
Note: The icon categories displayed at the bottom display any events
scheduled for the day you selected.
Note: The remaining Calendar entry types (Holiday Important, or Private
,
entries) contain similar fields and use similar creation procedures.
Indicates an Appointment.
Indicates an Anniversary.
Indicates an Important event.
Other Event Options
1. When the Idle screen displays, press the Menu soft key,
then select My Stuff ➔ Tools ➔ Calendar.
2. Select a day containing a Calendar entry and press
the selected day has one or multiple Calendar entries,
those are then displayed in a list.
. If
Indicates a Holiday.
7
Applications
120
•
Settings: this option allows you to configure the Calendar’s
Starting Day (select either Sunday or Monday) and Default View
Mode (select Month, Week, or Day view).
Indicates a Private event.
Indicates that an Alarm was set in reference to an event.
•
•
Missed Alarm Event: this option displays any missed events.
Used Space: this option displays a list of the different Calendar
event categories along with the memory allocation for each.
3. Highlight an event and press the Options soft key to use
4. When you have finished, press
.
one of the following Calendar entry options:
•
•
View: this option allows you view the details for a selected event.
Recent Calls
View Mode: this option allows you change the way you view the
Calendar entries: Month View (one month at a time), Week View
(one week at a time) or Day View (one day at a time).
The phone stores the numbers of the calls you’ve dialed,
received, or missed in the Recent Calls menu. If the number or
caller is listed in your Address Book, the associated name
•
•
•
Create: this option allows you to add an additional event to the
selected day(s).
Send via: this option allows you to send a listing of the event via a
text message or a Bluetooth device.
Tasks
This menu option allows you to create a “to do” entry of tasks
which are created in a similar fashion to previously described
Calendar entries.
Event List: this option allows you view a list of all currently active
events by type (Appointment, Anniversary, Holiday, Important, or
Private).
•
•
Delete: this option allows you to delete a selected or all events.
1. When the Idle screen displays, press the Menu soft key,
Save to My Stuff: allows you to save the calendar entry to your My
Stuff folder.
then select My Stuff ➔ Tools ➔ Tasks.
2. Press the Options soft key, then select Create to use the
•
Print via Bluetooth: allows you to send the event listing to a
Bluetooth printer.
following options:
•
Title: enter a title for this task (up to 15 characters).
121
•
Details: enter a detailed description for this task (up to 100
characters).
Calculator
With this feature, you can use the phone as a calculator. The
calculator provides the basic arithmetic functions; addition,
subtraction, multiplication, and division.
•
•
•
Start Date: enter a date for this task to begin.
Due Date: enter a date for this task to end.
Alarm: allows you to set an alarm for this event. Press the
to select this option. Once selected, all remaining alarm settings are
enabled.
key
1. At the My Stuff ➔ Tools menu, select Calculator.
2. Enter the first number using the numeric keys.
–
–
–
Alarm Date: allows you to the specify the date you wish the alarm to
sound.
Note: To include a decimal point or a bracket, press the left soft key until the
symbol you want displays.
Alarm Time: enter a time for this alarm to sound. Use the Right
Navigation key to select AM or PM for the start time of the alarm.
3. Enter the operation for your calculation by pressing the
Navigation keys, according to the illustration on the
display.
Alarm Tone: allows you to choose an alarm tone. Once highlighted,
press the
key to select this audio file.
•
Priority: allows you assign the task a priority (1, 2, or 3).
3. When you have finished, press
to save this new
4. Enter the second number.
appointment entry.
5. To view the result, press
.
Notes
Tip Calculator
With this feature, you can use the phone to calculate the amount
of money left as a tip based on parameters such as: total bill
amount, tip percentage, and number of members in your party.
This option allows you to create notes to add to your events.
1. At the My Stuff ➔ Tools menu, select Notes. A blank
screen displays.
1. At the My Stuff ➔ Tools menu, select Tip Calculator.
2. Press the Options soft key, then select Create.
2. Enter the values into the appropriate fields by using the
3. Enter your text, press the Options soft key and select
numeric keys:
Save, or press
.
Applications
122
•
•
•
Bill
3. Each converter function has a field for the type of unit to be
converted, and the type of unit to convert to. An additional
field allows you to input the unit amount to convert.
Tip(%)
# paying
4. To do the conversion, press the right/left navigation keys.
The unit converted to will appear in the appropriate field. In
the case where conversions are not direct, decimal figures
will appear for greater accuracy.
Note: To include a decimal point by pressing the
key.
The remaining fields indicate:
•
•
Tip($): the amount of the tip based on the figures entered.
You pay: your share of the total check amount. This value is based
on the figure entered within the # paying field.
World Time
World Time allows you to view the time of day or night in another
parts of the world. World displays time in the 30 different cities,
within all 24 time zones around the world.
Converter
The conversion menu provides the following conversion
categories:
1. At the My Stuff ➔ Tools menu, select World Time.
•
•
•
•
•
•
Currency
Length
2. Use the Left or Right Navigation keys to browse cities and
times.
Weight
Volume
Area
3. Press
or the Set DST soft key to indicate that the
selected time zone has Daylight Savings Time (DST). The
displayed time will shift to reflect the time zone and usage
of DST.
Temperature
1. At the My Stuff ➔ Tools menu, select Converter.
2. Select the specific converter function.
4. Default time zone for the handset is set using Settings ➔
Time & Date.
123
Timer
You can use this menu to set a countdown timer. To enable the
Timer, use the following options:
1. At the My Stuff ➔ Tools menu, select Timer.
2. Press the Set soft key to enter the length of time.
3. Enter the time and press the OK soft key.
4. Press
to start the timer. Press
to stop the timer.
Stopwatch
You can use this menu to measure intervals of time for 50
separate times.
1. At the My Stuff ➔ Tools menu, select Stopwatch.
2. Press
3. Press the right soft key
4. Press the Reset soft key to erase all times recorded.
to begin recording the lap.
to stop the stopwatch.
Applications
124
Section 13: WAP Browser and MEdia Net
Your phone is equipped with a WAP (Wireless Application
Protocol) browser which allows you to access the Internet. This
section explains how to access the WAP services of your service
provider and navigate the WAP browser.
Navigating with the WAP Browser
1. To scroll through browser items, press the Up or Down
Navigation keys.
2. To select a browser item, highlight a MEdia Net entry and
Accessing the WAP Browser
To access the WAP browser, do the following:
press
or press the Options soft key and choose Go to.
3. To return to the previous page, press
, or press the
ᮣ
When the Idle screen displays, press
– Or –
.
Back soft key.
4. To access the browser menu list, press the Options soft
Press the Menu soft key, then select any one of the
key.
following menu options:
5. To return to the start-up homepage, press the Options soft
• MEdia Mall
➔
Shop Tones
/
Shop Games
/
Shop Graphics
/
key and select Go to Homepage.
Shop Multimedia
/
Shop Applications
/
Shop Videos
/
MEdia Net
Entering Text in the WAP Browser
• AT&T Music
➔
Music Player
/
Shop Music
/
MusicID
/
XM
Radio Music Videos
/
/
The Buzz
/
Community
/
Music
When you are prompted to enter text, the currently active text
input mode is indicated on the screen. To change the text input
mode, press
one or more times.
• MEdia Net
➔
MEdia Net Home (For more information, refer to
The following modes are available:
•
Upper-Case Alphabet Mode (A): allows you to enter upper-case
characters.
Tip: You can also access the WAP browser from the My Stuff menu by
selecting any of the “Shop” options in any of the My Stuff sub-menus.
125
•
Lower-Case Alphabet Mode (a): allows you to enter lower-case
characters.
•
Page Size: change the page size of the displayed web page using the
Right and Left Navigation keys to enlarge or shrink the size of the
displayed page (there are 20 increments).
Note: You can enter symbols in upper or lower case alphabet mode by
•
•
•
•
Go to Homepage: takes you back at any time to the homepage of the
Wireless Web service provider.
pressing the 1 key.
Add to Favorites: bookmarks the current page and marks it as a
favorite site.
•
•
T9 Mode (T9): allows you to enter characters by pressing one key per
letter. In this mode, you can use only the key to display alternative
words. To change case, press and hold the key.
Number Mode (1): allows you to enter numbers.
0
View Favorites: accesses and displays the bookmarks assigned as
favorite web pages.
*
Enter URL: allows you to manually enter the URL address of a WAP
site. After entering an address, press the Go to soft key to go there
directly.
Selecting and Using Menu Options
Various options are available when you are using the WAP
Browser to navigate the Wireless Web.
•
•
Copy URL to Message: send the URL of the current page to another
party as a message.
To access a option, press the Options soft key. A menu list
displays.
Save: saves either the image of the current web page or the current
page itself.
Note: The menus may vary, depending on your version of the WAP Browser.
•
•
•
Saved Pages: access the list of web pages you have saved.
History: displays the list of web pages you have recently accessed.
Advanced: allows you to change the following settings for the
browser.
The following options are available:
•
Go: lets you navigate Forward (next sequenced web page) or
Backward (to the previously visited web page) through pages in your
browsing history.
–
Clear Cache: deletes the information stored in the cache. The cache
stores the most recently accessed pages.
•
•
Reload: reloads the current page with updated information.
Desktop View/Smart-Fit View: changes the display mode of the
browser.
–
Empty Cookies: delete cookies. Cookies are pieces of personal
information sent to a web server while navigating the web.
WAP Browser and MEdia Net
126
–
–
Cookie Options: sets whether or not cookies are stored on your phone.
If you select Prompt, the phone will ask you to save the cookies on
every page requiring cookies.
Preferences: changes the settings for the web browser to suit your
preference.
•
•
•
Sports
Weather
MEdia Net (homepage)
3. Press the Options soft key and select Go to, or press
.
–
–
–
Certificates: accesses certificate information from your phone.
Page Details: displays the properties for the currently active web page.
About Browser: displays the access version and copyright information
about the browser.
Adding Favorites
1. When the Idle screen displays, press the Menu soft key,
then select MEdia Net ➔ Enter URL.
2. Enter the URL and press
to access the web site.
Using Favorites
While navigating through either the Internet or the MEdia Net
pages, you can bookmark a site to quickly and easily access it at
a future time. The URLs (web site addresses) of the bookmarked
sites are stored in the Favorites folder, where you can use the 6-
preset favorites and store your own favorite URLs.
Tip: You can use the
key to cycle through available symbols and choose
the . (period) and the @ (at) symbol needed for most web site
addresses.
3. Press the Options soft key, then select Add to Favorites.
Accessing a Web Site Using Favorites
1. When the Idle screen displays, press the Menu soft key,
then select MEdia Net ➔ Favorites.
Note: Alternatively, you can select MEdia Net
➔
Enter URL, then enter the
URL, navigate to the Add Favorites field and select the Check soft key.
4. When you have finished, press
.
2. Select a bookmark item in the Favorite list. The preset
bookmarks consist of:
•
•
•
My Account
Chat Group
News
127
Editing Favorites
Downloading Multimedia Files
1. From the Favorites list, highlight the favorite you want to
You can buy a variety of multimedia files, such as ringtones,
graphics, applications, multimedia content, and so on from the
WAP browser. Your phone has embedded links to the web sites
providing you with download services, preset by your service
provider.
change.
2. Press the Options soft key and select Edit Favorites.
3. Change the Title and URL using the Navigation key keypad.
1. When the Idle screen displays, press the Menu soft key
and select MEdia Mall.
4. Press the Save soft key.
2. Depending on the type of items you want to buy, select
Shop Tones, Shop Games, Shop Graphics, Shop
Multimedia, Shop Applications, or Shop Videos.
5. When you have finished, press
.
Deleting a Favorite
1. From the Favorites list, highlight the bookmark you want to
To access the homepage for the online shopping mall,
select MEdia Net Home.
delete.
3. Find the item you want to download and follow the on-
2. Press the Options soft key and select Delete ➔ Selected.
screen instructions to purchase it.
3. At the Delete? confirmation pop-up, press the Yes soft key
to continue, or the No soft key to cancel.
4. When you have finished, press
.
WAP Browser and MEdia Net
128
3. When you have finished, press
.
Using your History
The History list provides you with a list of the most recently
visited web sites. These entries can be used to return to
previously unmarked web pages.
Clearing the Cookies
A cookie is a small file which is placed on your phone by a web
site during navigation. In addition to containing some site-
specific information, it can also contain some personal
information (such as a username and password) which can pose
a security risk if not properly managed. You can clear this cookies
from your phone at any time.
1. When the Idle screen displays, press the Menu soft key,
then select MEdia Net ➔ History.
2. Use the Up or Down Navigation key to highlight an entry
from the list.
1. When the Idle screen displays, press the Menu soft key,
3. To access the highlighted site, press the Options soft key
then select MEdia Net ➔ Advanced ➔ Empty Cookies.
and select Go to.
2. At the Empty Cookies? confirmation pop-up, press the
4. When you have finished, press
to exit from the
Yes soft key to continue, or the No soft key to cancel.
browser.
3. When you have finished, press
.
Clearing Caches
A cache is the phone’s temporary memory in which the most
recently accessed web pages are stored. You can clear the
caches at anytime.
Changing the WAP Profiles
Your phone is wirelessly connecting to the Internet via a built in
WAP browser. Connection can be made via either one of four
available connection profiles: MEdia Net, AT&T MMS (MultiMedia
Server), or AT&T IMS. Use this menu to create and customize the
profiles containing the settings for connecting your phone to the
network. You need these settings to use the WAP browser or to
send MMS messages or Email messages. Although the active
connection can be changed by the user, it is recommended that
1. When the Idle screen displays, press the Menu soft key,
then select MEdia Net ➔ Advanced ➔ Clear Caches.
2. At the Clear Caches? confirmation pop-up, press the Yes
soft key to continue, or the No soft key to cancel.
129
this choice be made with the assistance of either the retailer or
customer service representative.
5. Select each parameter you want to edit:
•
•
•
Set Name: enter a profile name.
1. When the Idle screen displays, press the Menu soft key,
Access Name: edit the access point name.
then select MEdia Net ➔ Browser Settings.
Auth Type: select the type of authentication used for this WAP
connection: None, Normal, or Secure.
2. Use the Up or Down Navigation key to highlight one of
•
•
User ID: enter the User ID required to connect to the network.
these connection profiles:
Password: enter the user password required to connect to the
network.
•
•
•
MEdia Net
AT&T MMS
AT&T IMS
•
•
•
Protocol: set the connection protocol used by the WAP browser:
WAP or HTTP.
3. Press the Options soft key.
Home URL: enter the URL address of the page to be used as your
homepage.
Caution!: The WAPs are pre-configured and can not be altered using this
screen. The MMS connection option can be edited, renamed, or
deleted using this screen. Your phone is set up by default for
connecting to the network.
Gateway address: (WAP only) enter the gateway address of the
proxy server.
•
•
Proxy address: (HTTP only) set the proxy server address and port.
Linger Time (Sec.): set a time period (in seconds) after which the
network is disconnected if there has been no new data traffic in that
time.
If you change the settings without first checking with your service
provider, the web browser, MMS, and e-mail features may not
work properly.
•
Advanced Settings: allows you to configure some of the IP-
specific information: Static IP, Static DNS, Server information, and
Traffic Class.
4. To create a new connection profile, press the Options soft
key and select New.
–
Static IP: specify if you want to manually enter an IP address. If you
want the IP address to be automatically assigned by the server, remove
the check mark.
- or -
To edit an existing profile, highlight the profile, press the
Options soft key, and select Edit.
WAP Browser and MEdia Net
130
–
–
Local phone IP: enter the IP address obtained from the network
operator, if you checked the Static IP option.
•
•
My Links: provides you with quick access to your those sites which
you have setup in this category. Highlight one of these entries and
press the
key to launch that web page.
Static DNS: specify if you want to manually enter the Domain Name
Server (DNS) address. If you want the address to be automatically
assigned by the server, remove the check mark.
Categories: provides you with a list of MEdia Net web pages
containing links to a variety of special interest sites. Highlight a
selection from this list and press the
can be edited from within Customize MEdia Net.
key. These categories
–
–
Server 1/Server 2: enter the Domain Name Server (DNS) addresses.
Traffic Class: select the traffic class.
registration process located at: att.com/wireless, or you must agree to
the terms of the service agreement and setup the service on your
handset.
Note: The WAP settings may vary depending on the service provider.
Using Quick Tips
Quick Tips is a new service for AT&T customers, where you can
get answers to Frequently Asked Questions (FAQ) and tips for
using your handset. Access to Quick Tips is through the Settings
Menu.
•
My Account: provides you with access to a listing of your most
recent purchases and available product (services). From the My
Account screen, highlight My Purchases and press the
key
to begin.
•
Customize MEdia Net: provides you with a list of MEdia Net setup
and service options which allow you to configure different aspects
of the MEdia Net experience. Highlight a selection from this list and
Accessing the MEdia Net Homepage
1. In Idle mode, press
to launch the WAP browser and
access the MEdia Net Home page.
press the
key.
–
Edit My Links: provides you with a list of available Internet links which
you can choose to add to your My Links section of the main Media Net
homepage. To add a link, navigate to the Add to My Links section,
The content of the start-up homepage contains the
following selections:
highlight an entry, and press the
key. To remove a link, navigate to
•
Search field: allows you enter a text string into the field and then
search the MEdia Net database for matches. Once you have
entered a word, press the Right Navigation key to select the
the Move/Delete Links section, highlight an entry, and press the
key. From the Edit My Links page, highlight Remove, and press the
key.
Search button and press the
key to begin your search.
131
–
Edit Categories: allows you to edit those category entries which
appear on the MEdia Net homepage. Although the first four entries
(WHAT’S HOT, Tones, Games, Pics, and CV) can not be removed, the
remaining entries can be toggled on or off. Highlight a category entry
•
Help: provides you with list of some of the most frequently asked
questions regarding MEdia Net functionality. Highlight a question
and press the
key to launch an on screen description
2. To scroll through the screen, use the Up and Down
and press the
key to toggle it on (appear on the page) or off
Navigation keys.
(remove it from the homepage).
–
–
Parental Controls: provides you with settings which can be configured
to restrict certain media content from being downloaded on the phone.
(For more information, refer to “Parental Controls” on page 113.)
To exit the browser at any time, simply press
Accessing the MEdia Net Site
There are several ways to access a web site:
.
Username & Password: allows you to setup a username and
password prior to gaining access to the MEdia Net homepage and
related services.
•
•
•
Selecting a link on the browser.
Selecting an item in the Favorites menu.
Entering a URL address manually, using the Go to URL Enter URL
/
Note: Prior to using this service you must agree to the terms of the service
agreement and setup the service on your handset.
browser option.
–
MEdia Net Mail: allows you to access and edit the entries found within
the MEdia Net messaging center. Although most of the entries can not
be removed, the remaining entries can be toggled on or off by
navigation to the top of the page, highlight Edit, and press the
From the Mail & Messaging page, highlight an entry and press the
key to toggle it on (appears on the Mail & Messaging page) or off
(remove it from the Mail & Messaging page).
key.
–
–
MEdia Net Tour: allows you to take a quick guided tour through the
main features of the MEdia Net pages (homepage, navigation, teams,
etc.).
Privacy Policy: provides the web address for Cellular’s Privacy Policy.
WAP Browser and MEdia Net
132
Section 14: Accessibility
TTY Settings*
TTY (also known as a TDD or Text Telephone) is a
telecommunications device that allows people who are deaf or
hard of hearing, or who have speech or language disabilities, to
communicate via a telephone. This phone comes TTY-ready and
only requires the insertion of the TTY device to enable this
feature.
Use the following steps to access the TTY settings:
ᮣ
Inserting a TTY connector into the Headset/Adapter jack (on
the left side of the phone) enables this function.
For additional technical support you may access the following
website or call 1-888-987-4357.
133
Section 1: Health and Safety Information
Thissectionoutlinesthesafetyprecautionsassociatedwithusing
yourphone.Thesesafetyprecautionsshouldbefollowedtosafely
use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC. For body worn
operation, this phone has been tested and meets FCC RF
exposure guidelines when used with an accessory that contains
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
Health and Safety Information
134
no metal and that positions the handset a minimum of 1.5 cm
from the body.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
GSM:
850
•
•
Head: 1.24 W/Kg.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Body-worn: 1.17 W/Kg.
1900
•
•
Head: 0.449 W/Kg.
Body-worn: 0.570 W/Kg.
information.
WCDMA:
850
UL Certified Travel Adapter
•
•
Head: 0.679 W/Kg.
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
Body-worn: 0.491 W/Kg.
1900
•
•
Head: 1.28 W/Kg.
Body-worn: 0.602 W/Kg.
135
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
Health and Safety Information
136
In some cases, other researchers have had difficulty in
reproducing those studies, or in determining the reasons for
inconsistent results.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What is FDA's role concerning the safety of wireless
phones?
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
137
What are the results of the research done already?
none of the studies can answer questions about long-term
exposures, since the average period of phone use in these
studies was around three years.
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists. Epidemiological studies can
provide data that is directly applicable to human populations, but
ten or more years' follow-up may be needed to provide answers
about some health effects, such as cancer. This is because the
interval between the time of exposure to a cancer-causing agent
and the time tumors develop - if they do - may be many, many
years. The interpretation of epidemiological studies is hampered
by difficulties in measuring actual RF exposure during day-to-day
use of wireless phones.
However, many of the studies that showed increased tumor
development used animals that had been genetically engineered
or treated with cancer-causing chemicals so as to be pre-
disposed to develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which
people use wireless phones, so we don't know with certainty
what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures. However,
Many factors affect this measurement, such as the angle at
which the phone is held, or which model of phone is used.
Health and Safety Information
138
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF). FDA has been a leading participant in the World
Health Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996. An influential result of this
work has been the development of a detailed agenda of research
needs that has driven the establishment of new research
programs around the world. The Project has also helped develop
a series of public information documents on EMF issues.
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
139
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000. They noted that no evidence exists that using a
wireless phone causes brain tumors or other ill effects.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims. According to FTC,
these defendants lacked a reasonable basis to substantiate their
claim.
Their recommendation to limit wireless phone use by children
was strictly precautionary; it was not based on scientific
evidence that any health hazard exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
Health and Safety Information
140
What about wireless phone interference with
medical equipment?
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
•
•
•
•
•
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
National Radiation Protection Board (UK):
US Food and Drug Administration:
Road Safety
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
141
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
inconvenient time, let your voice mail answer it for you.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
Health and Safety Information
142
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices).
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
Provided by the Cellular Telecommunications & Internet
Association.
143
You should follow some commonsense recommendations when
using any portable audio device:
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Voice: (800) 222-2336
Email: [email protected]
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, you
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
Internet: http://www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Voice: (301) 496-7243
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
Email: [email protected]
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
Health and Safety Information
144
UsingYourPhoneNearOtherElectronicDevices
National Institute for Occupational Safety and Health
Hubert H. Humphrey Bldg.
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
200 Independence Ave., SW
Washington, DC 20201
Voice: 1-800-35-NIOSH (1-800-356-4647)
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger. When connecting
the phone or any accessory to another device, read its user's
guide for detailed safety instructions. Do not connect
incompatible products.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
•
•
Should not carry the phone in a breast pocket;
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place.
Should read and follow the directions from the manufacturer of your
implantable medical device. if you have any questions about using
your wireless phone with such a device, consult your health care
provider.
145
For more information see:
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Hearing Aid Compatibility with Mobile Phones
Some digital wireless phones may interfere with some hearing
aids. In the event of such interference, you may wish to consult
your hearing aid manufacturer to discuss alternatives.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
Vehicles
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Health and Safety Information
146
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association, One Batterymarch Park, Quincy, MA
02269, Attn: Publication Sales Division.
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
Cautions
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
147
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Understanding How Your Phone Operates
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Health and Safety Information
148
Maintaining Your Phone's Peak Performance
Battery Standby and Talk Time
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Battery Precautions
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
•
Speak directly into the phone's receiver.
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
149
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below 0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
Health and Safety Information
150
•
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
151
Section 2: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
Warranty Information
152
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
153
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
Warranty Information
154
Precautions for Transfer and Disposal
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Phone: 1-888-987-HELP (4357)
©2008 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Customer Care Center:
1000 Klein St.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
155
Index
Playing Music Through a Stereo
Playing Music Transferred from the
Handset 95
Playing Music while Using the
Phone 95
Playlists 96
Transferring Music From the Digital
Transferring Music Windows Media
Player 99
Audio 40
A
Anniversary 119
Address Book
Checking the Used Space 63
Copying an entry to the SIM Card 60
Deleting all of the Address Book
Entries 61
Applications
Alarms 117
Calendar 118
Tasks 121
FDN (Fixed Dialing Number)
Tools 106
AT&T Music
Community 104
MusicID 101
Mode 59
B
Battery
156
Bluetooth 84
Call Functions
3-Way Calling (Multi-Party
Searching for a Number in Address
Book 30
Discoverable 84
Bluetooth Device
Stereo 95
Calling) 31
Call Settings
Saving the Missed Call Number to
C
Calculator 46
Anniversary 119
Appointment 119
Holiday 120
Call Status Tones
Call Waiting
Activate 83
Deactivate 83
Camcorder 111
Important 120
Private 120
Call Forwarding
Busy 83
Unreachable 83
157
Camcorder Options
Camcorder Options after a Video is
Taken 114
Effects 113
Settings 114
Shortcuts 108
Customizing 38
Options 35
Display 77
Icons 16
Display Settings
Shortcuts 114
White Balance 113
Camera 45
Camera Options
Effects 107
Frame Shot 107
Wallpaper 77
E
Entering Text
F
Connectivity
Configuring Your Phone’s Network
Profiles 86
Converter 47
FDN
D
Dialing Display
G
Panorama 107
Settings 108
Games 91
General
158
Getting Started
Light Settings
Brightness 77
Navigating with the WAP
Browser 125
Voicemail 9
Memory
Memory Management
Menu Navigation
Menu Navigations
Message Settings
Messaging
M
Media Clip Options
Landscape 37
GPS 48
Pause/Resume 37
Properties 37
Stop 37
MEdia Mall
Group Settings
H
I
L
Creating and Sending Text
Messages 64
MEdia Net and WAP
Accessing the MEdia Net
Homepage 131
Language
159
Mobile Email
Mute 30
My Stuff
Alarms 46
Audio 40
Calculator 46
Camera 45
Converter 47
CV 35
Graphics 42
Notes 46
Stopwatch 47
Tasks 46
Notes 46
Multitasking 95
Music File Extensions
3GP 94
AAC 94
AAC+ 94
eAAC+ 94
M4A 94
MP3 94
MP4 94
MPEG 94
WMA 94
Music Player 94
Music Videos
MusicID
Exit 102
O
Other Profiles
P
Parental Controls
Phone
Phone Settings
Timer 47
Videos 45
N
Navigating with the WAP Browser
Entering Text in the WAP
Browser 125
160
Playlists
Settings
Applications 87
Bluetooth 84
Call 82
Calls 81
Connectivity 83
Display 77
Language 79
Phone 79
Reset 88
Security 80
Shortcuts 79
Sound 74
Show Number
Hide 82
Show 82
SIM 5
Sound Settings
Speed Dial
Speed Dial List
Changing a Contact Assigned to a
Key 58
Stopwatch 47
Importing a Playlist from Windows
R
Record Audio
S
Security
T
T9 Mode
Add Words Not in the T9 Dictionary
161
Tasks 46
Videos 45
Text Input Method
ABC (Alphabetic) Input Method (abc,
Changing 51
Numeric 51
Symbols 51
Time & Date
Timer 47
Tools
Calculator 122
Converter 123
Notes 122
Stopwatch 124
Tasks 121
Voice Call
Voice Mail
W
Where 49
U
Understanding Your Phone
Using Favorites
Accessing a Web Site Using
Favorites 127
V
Video Categories
Video Share
In-Call 24
Initiating and Receiving a Video
Settings 88
Timer 124
162
163
|