PORTABLE CELLULAR
TELEPHONE
* Some of the contents in this manual may differ from your phone,
depending on the software installed or your service provider.
SCH-X839
User’s Manual
ELECTRONICS
Printed in Korea
Code No. : GH68-05542A
English. 12/2004. Rev.1.0
World Wide Web
Table of contents
Table of contents
Using Hebrew, English mode ..................................... 40
Using Symbol mode ................................................. 43
Using Number mode................................................. 43
Voice Memo (Menu 6-1) ............................................. 91
Voice Answer (Menu 6-2)............................................ 93
Settings................................................................96
Sounds (Menu 7-1).................................................... 96
Display (Menu 7-2) ................................................. 100
Auto retry (Menu 7-3) ............................................. 103
Answer mode (Menu 7-4) ........................................ 103
Security (Menu 7-5)................................................ 104
Data/Fax Mode (Menu 7-6) ...................................... 108
Memory status (Menu 7-7)....................................... 109
Using the menus...................................................44
Accessing a menu function by scrolling ....................... 44
Using shortcuts ....................................................... 45
List of menu functions .............................................. 46
Calls .....................................................................51
Missed (Menu 1-1).................................................... 51
Incoming (Menu 1-2) ................................................ 52
Outgoing (Menu 1-3)................................................. 53
Air Time (Menu 1-4).................................................. 53
VAS.....................................................................110
Internet Portal (Menu 8-1)....................................... 110
Games & App. (Menu 8-2) ....................................... 114
Ringtone (Menu 8-3)............................................... 116
Animation (Menu 8-4) ............................................. 116
Voice Portal (Menu 8-5)........................................... 117
SMS INFO (Menu 8-6) ............................................. 117
GPS (Menu 8-7) ..................................................... 118
What’s new? (Menu 8-8).......................................... 119
Phone book...........................................................54
Find (Menu 2-1) ....................................................... 54
Add (Menu 2-2)........................................................ 57
Group Set (Menu 2-3) ............................................... 62
My Phone # (Menu 2-4)............................................. 62
Message ...............................................................63
Text MSG (Menu 3-1)................................................ 63
MMS (Menu 3-2)....................................................... 68
Voice Mail (Menu 3-3) ............................................... 73
Msg Setup (Menu 3-4)............................................... 74
Camera...............................................................120
Take photo (Menu 9-1)............................................ 120
Record video (Menu 9-2) ......................................... 124
Photo album (Menu 9-3).......................................... 126
Video album (Menu 9-4) .......................................... 127
MMS (Menu 9-5)..................................................... 129
Settings (Menu 9-6)................................................ 132
Memory status (Menu 9-7)....................................... 132
Scheduler .............................................................77
Calendar (Menu 4-1)................................................. 77
Alarm Set (Menu 4-2) ............................................... 80
Set time (Menu 4-3) ................................................. 81
Calculator (Menu 4-4) ............................................... 83
Today (Menu 4-5)..................................................... 83
To Do List (Menu 4-6) ............................................... 84
World time (Menu 4-7).............................................. 85
Countdown (Menu 4-8).............................................. 86
Memo pad (Menu 4-9)............................................... 87
Health and safety information ............................133
Exposure to radio frequency (RF) signals .................. 133
For body operation................................................. 135
Precautions when using batteries............................. 136
Road safety .......................................................... 137
Operating environment........................................... 138
Electronic devices .................................................. 138
Potentially Explosive Environments .......................... 140
Emergency calls .................................................... 141
Other important safety information .......................... 142
Care and maintenance............................................ 143
Games ..................................................................88
Chicken run (Menu 5-1)............................................. 89
Mobile cop (Menu 5-2) .............................................. 89
Voice Tools ...........................................................91
Glossary .............................................................145
4
5
Table of contents
Index..................................................................148
Quick reference card...........................................151
6
Important safety
precautions
Read these guidelines before using your wireless
phone. Failure to comply with them may be
dangerous or illegal.
Road safety at all times
Do not use a hand-held phone while driving; park
the vehicle first.
Switching off when refuelling
Do not use the phone at a refuelling point (service
station) or near fuels or chemicals.
Switching off in an aircraft
Wireless phones can cause interference. Using them
in an aircraft is both illegal and dangerous.
Switching off in hospitals
Switch off your phone near medical equipment.
Follow any regulations or rules in force.
Interference
All wireless phones may be subject to interference,
which could affect their performance.
Special regulations
Meet any special regulations in force in any area
and always with off your phone whenever it is
forbidden to use it, or when it may cause
interference or danger (in a hospital for example).
7
Important safety precautions
Sensible use
Unpacking
Your package contains the following items. The
illustrations below may look different from your
phone and accessories:
Use only in the normal position (held to the ear).
Avoid unnecessary contact with the antenna when
the phone is switched on.
Emergency call
Ensure the phone is switched on and in service. Key
in the emergency number for your present location,
then press the
key. You must deactivate any
Travel adapter
Handset
Battery
unnecessary features in use before you can make
an emergency call. Give all necessary information
as accurately as possible. Do not end the call until
given permission to do so.
Water resistance
Your phone is not water-resistant. Keep it dry.
Necklace headset
Accessories and batteries
Use only Samsung-approved accessories and
batteries. Use of any unauthorized accessories
could damage your phone and may be dangerous.
User’s manual
Hand strap
Qualified service
Only qualified service personnel may repair your
phone.
For more detailed safety information, see “Health
and safety information” on page 133.
CAUTION
RISK OF EXPLOSION IF A BATTERY IS REPLACED
BY AN INCORRECT TYPE.
DISPOSE OF USED BATTERIES ACCORDING TO
THE INSTRUCTIONS.
8
9
Your phone
Your phone
With the phone closed
Antenna
Phone layout
Camera
Flash
The following illustrations show the main elements
of your phone:
Service light
Camera key
External display
With the phone open
Earpiece
Key(s) Description
Performs the functions indicated by the
screen text above them, on the bottom
line of the display.
Display
(soft keys)
Navigation (Up/
Down/Left/
Right) keys
In Menu mode, scrolls through menu
options.
In Standby mode; quickly enters the
following menu respectively:
• Up: GPS
• Down: Games & App.
• Left: Message
VAS key
Headset jack
Soft key (left)
Soft key (right)
Power On/Off/
menu exit key
Volume/menu
browse keys
• Right: Find in the Phone book
menu.
Cancel/
correction ley
Dial key
Alphanumeric
keys
Enters the VAS menu.
Special
function keys
Makes or answers a call.
In Standby mode, retrieves the most
recent numbers dialed, received, or
missed. Redials the last number when
pressed and held.
Microphone
10
11
Your phone
Your phone
Display
Key(s) Description (continued)
Ends a call. Also switches the phone on
The display has three areas: the top line of icons,
the text and graphic area, and the bottom line of
soft key indicators.
and off when pressed and held.
In Menu mode, cancels your input and
returns to Standby mode.
Icons
Deletes characters from the display.
Text and
graphics area
In Menu mode, returns you to the
previous menu level.
Enters numbers, letters, and some
special characters.
Soft key function
indicators
Menu
VA
In the text entry mode, changes the
case of letters.
Icons
Icon Description
In Standby mode, quickly enters or
exits Silent mode when pressed and
held.
Signal strength: Shows the received
signal strength. The greater the number
of bars, the better the signal.
In the text entry mode, inserts a space.
Service: Appears when a call is in
progress.
(on the right side of the phone)
Allows you to quickly access the
Camera menu. Turns on the camera
when pressed and held.
No service: Appears when you are
outside a service area. When it displays,
you cannot make or receive calls. Wait a
little while for a better signal or move into
an open area to regain service.
(on the left side of the phone)
During a call, adjust the voice volume.
Roaming: Appears when you are out of
your home area and have logged onto a
different network; for example, when
traveling in other countries.
In Standby mode, adjusts the Key tone
volume.
12
13
Your phone
Your phone
Backlight
Icon Description (continued)
Alarm mode: Appears when you set an
alarm to ring at a specified time.
The backlight illuminates the display and keypad.
When you press any key or open the phone, the
backlight illuminates. It turns off if no key is
pressed within a given period of time, depending on
the Backlight menu (Menu 7-2-3) set in the
Display menu.
New message: Indicates that there is a
new message waiting to be checked.
New voice mail message: Indicates
that there is a new voice mail message
waiting to be checked.
To specify the length of time the phone waits before
the backlight turns off, set the Backlight menu.
See page 102 for further details.
Vibration mode: Appears when the
ringer volume for call is set to Vibrate or
when your phone is in Silent mode.
Service light
Restriction on: Appears when any option
of the Restriction feature is activated.
The service light on the front of the phone, on the
right side of the camera, flashes to indicate an
incoming call, message, or alarm and flashes for a
few seconds when you turn on or off the phone. It
blinks while the battery is charging with the travel
adapter; the color of the light turns green when the
battery is fully charged.
Lock mode: Appears when your phone is
locked.
Ringer silent: Appears when the ringer
volume for calls is set to No tone
.
Battery status: Shows the level of your
battery. The more bars you see, the more
power you have remaining.
Camera
The camera module on the front of the phone
allows you to take a photo or record a video while
on the move.
External display
Your phone has an external display on the phone.
When you close the phone, it turns on and indicates
when you have an incoming call or a message. It
also alerts you at the specified time when you have
set an alarm by turning its backlight and showing
the corresponding icon on it.
For further details about the Camera feature, see
page 120.
When the display is off, press and hold one of the
Volume keys on the left side of the phone to turn on
the display.
14
15
Your phone
Getting started
Flash
You can use the built-in flash on the front of the
phone, on the left side of the camera, to take
photos when it is dark.
Using a battery
Your phone is powered by a rechargeable Li-ion
battery. Use only approved batteries and chargers.
Ask your local Samsung dealer for further details.
Note: You must fully charge the battery before using
your phone for the first time. A discharged
battery recharges fully in approximately 200
minutes for a standard battery.
Installing the battery
1. Place the battery so that the tabs on the end
align with the slots at the bottom of the phone.
16
17
Getting started
Getting started
2. Press the battery until it clicks into place.
Charging the battery
Make sure that the battery is properly installed
before switching on the phone.
A travel adapter and a battery charger are provided
for charging your batteries.
Using the travel adapter
The travel adapter allows you to use the phone
while the battery is charging, but this will cause the
battery to charge more slowly.
1. With the battery in position on the phone, plug
the connector of the travel adapter into the jack
at the bottom of the phone.
Removing the battery
Make sure that the arrow on the connector is
facing toward the front of the phone.
1. If necessary, switch off the phone by pressing
and holding the
off image displays.
key down until the power-
2. Plug the adapter into a standard AC wall outlet.
The battery strength icon on the display shows
that the battery is charging.
2. To remove the battery. To do so:
➀
Slide the battery lock towards the top of the
phone.
➁
Lift away the battery, as shown.
➁
➀
18
19
Getting started
Getting started
3. When charging is finished, unplug the adapter
from both the power outlet and the phone by
pressing the buttons on both sides of the
connector and pulling the connector out.
3. The service light flashes and then the idle screen
appears on the display when the system locates
services.
If the phone is out of the service area, the No
Service icon (
) appears on the display. In this
case, you cannot place and receive calls. You
can try again later when service is available.
➀
Note: You can change the display language in the
➁
Language/
menu (Menu 7-2-6).
➀
See page 102.
4. When you wish to switch off the phone, press
and hold the key for more than one seconds
until the power-off image displays.
Note: Do not remove the battery from the phone
without unplugging the adapter while it is
charging. Otherwise, the phone may be
damaged.
WARNING!
Do not switch on the phone when mobile phone use
is prohibited or when it may cause interference or
danger.
Low battery indicator
When the battery is weak and only a few minutes of
talk time remain, the battery sensor will let you
know by blinking the empty Battery Strength icon
Note: Do not touch the antenna on the phone
unnecessarily when the phone is switched on.
Contact with the antenna affects the call quality
and may cause the phone to operate at a
higher power level than otherwise needed.
(
) and you will hear a warning tone and a ”LOW
BATTERY WARNING!” message will be repeated at
regular intervals on the display. When the battery
becomes too weak for the phone to operate, it
switches off automatically.
Switching on or off the phone
1. Open the phone.
2. Press and hold the
key for more than one
second to switch on the phone.
20
21
Getting started
Getting started
Using the soft keys
Your phone’s modes
Standby mode
Your phone offers a set of functions that allows you
to customize it. These functions are arranged in
menus and submenus, accessed using the two soft
Standby mode is the most basic state of your
phone. The phone goes into Standby mode soon
after you turn it on, or whenever you briefly press
keys,
and
. Each menu and submenu allows
you to view and alter the settings of a particular
function.
the
key. When your phone is in Standby mode,
The roles of the soft keys vary, depending on the
current function you are using; the labels on the
bottom line of the display just above each key
indicate their current role.
you will typically see the current time and date. If
you enter a phone number, you can press the
key to dial it, or press the Save soft key to save it
in the internal Phone book.
Example:
Press the
mode. Be careful; if you are on a call when you
press the key, your phone disconnects the call
and returns to Standby mode. Press the key
key at any time to return to Standby
C
several times or hold it to return to Standby mode
without ending the call.
Talk mode
SAMSUNG
09:58 Mon Jun25
You can place and answer calls only when your
phone is turned on. During a call, the phone is in
Talk mode. While you are in Talk mode, pressing
the Menu soft key gives you a list of options. See
page 34 for details on the options.
Menu
VA
Power Save mode
Your phone comes with a power save feature that
will automatically be activated if your phone is
unable to find a signal after 15 minutes of
searching. While this feature is active, the phone’s
battery charge is conserved. To return to Standby
mode, press any key.
Press the right soft
key to access the
Voice Answer
menu.
Press the left soft
key to access Menu
mode.
22
23
Getting started
Call functions
Lock mode
When you lock your phone using the Phone lock
menu (Menu 7-5-1), you can receive messages
and calls, but you cannot place a call until you
unlock the phone.
Making a call
To make a call:
To unlock the phone, press one of the soft keys,
one of volume keys, one of the navigation keys,
1. In Standby mode, enter the area code, and
phone number.
Camera key, VAS key or
key and enter the 4-
While entering a phone number, press the
Pause soft key to insert a hard pause. For more
information on pause dialing, see page 30.
digit lock code. The phone is immediately unlocked.
For further details about locking and unlocking the
phone, see page 104.
2. Press the
key. The phone places the call to
the entered phone number.
Silent mode
Note: If you have set the time interval for automatic
Silent mode disables all sounds. This feature is best
used in situations where the phone might disturb
others, such as in a meeting, a library, and a
theater.
redialing in the Auto retry menu (Menu 7-
3), the phone will automatically retry to make
the call when no one answers or the line is
busy. See page 103 for further details.
To enter Silent mode, press and hold the
key
until “Entering Silent Mode” and the Silent mode
icon ( ) appears.
Correcting the number
To exit and reactive the previous sound settings,
To clear
Press the
press and hold the
key until “Exiting Silent Mode”
the last digit
displayed
C
key.
appears. The Silent mode icon no longer displays.
Note: If you turn off the phone in Silent mode, the
Silent mode is still activated when you turn on
the phone.
the whole display
C
key for more than one
second.
24
25
Call functions
Call functions
Ending a call
Using the recent call logs
When you want to finish your call, press the
key.
The phone stores up to 90 of the calls dialed,
received, or missed chronologically. The last call is
saved in the first position.
The call time, the length of the call, displays along
with the phone number of the called person. If the
number is stored in your Phone book, the name
displays. If there is no match, you can press the
Save soft key and store the number in Phone book.
For further details about storing the number in
Phone book, see page 57.
To recall any of these numbers:
1. If there are any characters on the display,
return to Standby mode by pressing the
key.
2. Press the
displays.
key. The list of recent calls
Alternatively, simply close the phone to end a call.
•
•
•
: Outgoing calls
: Incoming calls
: Missed calls
Emergency dialing
You can place emergency calls from your
emergency numbers list, even if your phone is
locked or all outgoing calls are restricted. For
further details on emergency numbers, see
page 105.
3. Press the Up and Down keys, or the Volume
keys on the left side of the phone to scan
through the list until the number you want
highlights.
4. Press
to dial the highlighted number.
Making a call from Phone book
You can store the phone numbers regularly in
memory, which is called the Phone book. You then
simply recall the number to dial. For further details
on Phone book, see page 54.
26
27
Call functions
Call functions
Prepend dialing
Speed dialing
The Prepend option lets you add digits, such as area
codes and network feature activation codes, to a
phone number that is in your call logs before dialing
it.
Once you have stored phone numbers in Phone
book, you can dial them easily with the few presses
of the keys.
One-touch dial: Memory locations 0001 through
0009 are special one-touch locations. You can dial
the phone numbers stored in the Phone book
memory from 0001 through 0009 simply by
pressing one key.
To prepend the phone numbers stored in the call
logs:
1. Access a call log in the Recent Calls list referring
to page 27 or in the Calls menu (Menu 1).
Press and hold the fourth digit of the memory
location containing the number to be dialed.
2. When the phone number you want to dial
highlights, press the Select soft key.
For example: Location no. 0009
The display shows the details of the number.
Press the
9
key and hold.
The number (and name) stored displays, then dials.
3. Press the Menu soft key to access the Menu
pop-up list.
Two-touch dial: For memory locations of two
digits.
4. Press the
5. Enter the area code or feature code.
6. Press the key to dial the number.
3
key to select the Prepend option.
Press the third digit briefly, then hold down the
fourth digit of the memory cell.
For example: Location no. 0023
Press the
2
key briefly and hold down
the key.
3
The number (and name) stored displays, then dials.
Three-touch dial: For memory locations of three
digits.
Press the second and third digits briefly, then hold
down the fourth digit of the memory cell.
For example: Location no. 0123
Press the
down the
1
3
and
key.
2
key briefly and hold
The number (and name) stored displays, then dials.
28
29
Call functions
Call functions
Pause dialing from a stored Phone book entry
Pause dialing
1. Call the number from Phone book.
When you call an automated system, like a banking
service, you are often required to enter a password
or an account number. Instead of manually entering
the numbers each time, you can store the numbers
in your Phone book, separated by pauses.
2. Wait for the appropriate prompt from the
number you are calling.
3. When prompted, press the
key to send the
DTMF (Dual Tone Multi Frequency) number that
follows your pause.
Storing pauses in a Phone book entry
“SENDING DTMF” flashes on the display and the
transmitted tone sounds.
To store a number in your Phone book that contains
pauses:
1. Enter the phone number you want to store, such
as a bank’s teleservice phone number.
Manual pause dialing
You can enter pauses manually during the dialing
process.
2. Press the Pause soft key to insert a pause. A “P”
displays, meaning that a hard pause will occur
at that point in the dialing sequence.
1. Enter the phone number of the service you want
to call, such as a bank’s teleservice phone
number.
The “P” stops the dialing and waits for the
teleservice to prompt you for a number. The
number following the “P” is your account
number, etc.
2. Press the Pause soft key to insert a pause.
The screen displays a “P” indicating a pause.
3. Enter the digits that need to follow the pause,
such as your account number.
3. Enter the number to be sent after the pause by
pressing the digit keys, and then press the
key.
4. Repeat steps 2 and 3 to add more pauses and
numbers, if necessary.
4. After connecting, wait for the prompt from
teleservice. Press the
prompt to send the additional number.
key again after the
5. Store the number in your Phone book as you
normally would by pressing the Save soft key
and following from step 4 on page 57.
30
31
Call functions
Call functions
Adjusting the volume during a call
Answering a call
During a call, if you want to adjust the voice
volume, use the Volume keys on the left side of the
phone.
When somebody calls you, the phone alerts you by
ringing and blinking the service light.
If the caller can be identified, the caller’s phone
number or name, if stored in your Phone book,
displays.
Press the
key to increase the volume level and
the key to decrease the level. The image on the
display shows all five levels; the more bars you see,
the higher the level is.
There are many ways to answer a call, depending
on your setting in the Answer mode menu (Menu
7-4);
Setting option
By send key
To answer the call,
press the key.
By folder open
open the phone. If it is
already open, press the
key.
By any key
press any key except the soft
keys, the
key or the
Volume key.
In Standby mode, you can also adjust the key tone
volume using these keys.
To end the call, close the phone or press the
key.
Note: You can answer a call while using Phone book
or menu features. The current operation stops.
Silencing an incoming call
You can silence the ringer when a call comes. Press
one of the Volume keys when the phone is closed. If
it is open, press the left soft key.
32
33
Call functions
Call functions
Silent/Quit: does not transmit the key tones. It
allows you to press keys without hearing annoying
key tones during a call.
Viewing missed calls
If you fail to answer a call for any reason, the phone
indicates a missed call by displaying a text
notification on the screen. Additionally, if caller
information is available, a Missed entry is created,
and the screen displays the phone number of the
last missed call.
Send My #: sends your phone number to the
calling person or automated services.
DTMF Length: manipulates the audible DTMF
(Dual-Tone Multi-Frequency) tones. You can choose
either long or normal
.
When the display informs you of the missed call,
press the
the
key to call the displayed number, or
key to clear the message and return to
Three-way calling
Standby mode.
To view the list of the missed calls, refer to “Missed”
on page 51.
This feature enables you to conduct conference calls
with two separate people at the same time. The
phone records both calls in the Outgoing call log.
You are billed airtime for each of the outgoing calls
separately. Contact your service provider to
activate Three-Way Calling.
Options during a call
Your phone provides a number of functions that you
can use during a call. As many of these options are
network services, you may not be able to use all of
them at all times.
To make a three-way call:
1. During a conversation, enter the phone number
for the third person and press the
key.
Press the Menu soft key during a call to access the
following options:
2. When the third person answers, press the
key again to begin your three-way call.
Mute/Quit: allows you to switch your phone’s
microphone off, so that the other person cannot
hear you.
During a three-way call, if one of the callers hangs
up, you and the remaining caller will stay
connected. If you initiated the call and you hang up
first, all calls are disconnected.
Example: You wish to say something to another
person in the room, but do not want the other
person to hear you.
Calls: allows you to access the Calls menu. See
page 51.
Phone book: allows you to access the Phone
book menu. See page 54.
34
35
Call functions
Entering text
Call waiting
At many times when using your phone, you will
need to enter text; for example, when storing a
name in Phone book, writing a text message, or
scheduling events in your calendar. You can enter
alphanumeric characters into your phone by using
your phone’s keypad.
Call waiting lets you receive a second call during
conversation. Your phone notifies you of a call
waiting by beeping and displaying “Call Waiting.”
Note: Contact your service provider to activate the
Call waiting service.
Your phone has the following text input modes:
To answera waiting call:
•
•
•
•
T9 Hebrew: allows you to enter Hebrew letters
using the T9 input method.
To answer the call, press
. The phone connects
the calling party, and places the current party on
hold.
Hebrew: allows you to enter Hebrew letters as
you would in English mode.
Press
again to switch between two parties.
T9 English: allows you to enter English
characters with only one keypress per character.
Note: If you do not respond to a Call waiting
notification, the phone will forward the call to
voicemail or another number that you have set
up. Contact your service provider for more
information.
English: allows you to enter English characters
by pressing the key labeled with the character
you want until it displays.
•
•
Symbol: allows you to enter many different
symbols and special characters.
Number: allows you to enter numbers.
Call forwarding
Note: Not in Number mode, To enter a number, press
This feature provides the option of forwarding
incoming calls to another phone number, even
while your phone is off. Activating call forwarding
does not affect outgoing calls made from this
phone. Contact your service provider to activate call
forwarding.
and hold down the corresponding key.
Changing the text input mode
Example: Writing a text message
In the text entry screen, press the Mode soft key.
1. Scroll to the mode you want by pressing the
Navigation keys.
Note: If you want to exit the Mode list without
changing to a new mode, press the
C
key.
36
37
Entering text
Entering text
You can change between T9 Hebrew
,
Hebrew,
If the word does not display correctly, press the
T9 English, English and Number mode to
enter words. To include a symbol between
characters, Symbol mode is also available.
0
key once or repeatedly to display alternative
word choices for the keys you have typed.
For example, both “of” and “me” have the
sequence of the
displays the most commonly used choice first.
6
and
3
keys. The phone
2. To select the highlighted mode, press the Select
soft key.
You will find the selected text input mode
indicator on the display.
4. Insert a space between words by pressing the
key.
Message
119
Smart punctuation
You can insert periods, hyphens, and apostrophes
by pressing the
grammar to insert the correct punctuation. Notice
that key is used twice in this example to display
two punctuation marks:
1
key. T9 English applies rules of
1
Text input
mode indicator
Mode
OK
L
e t
‘
s
e
a
t
.
Using T9 Hebrew, T9 English mode
Changing the letter-case
To type a word, press the keys corresponding to the
letters you need. Remember the following as you
are typing:
Note: This feature is available only in T9 English
mode.
To shift case of the next letter(s) that you type,
press the key. There are three cases:
1. Press keys on the phone just once per letter. For
example, to enter “Hello,” press the
and keys.
4,
3,
5
,
5,
• Initial Capital (T9Word
• Capitals Lock (T9WORD
• Lower Case (T9word
)
6
)
2. The word you are typing appears on the display.
It may change with each key press.
)
3. Type to the end of the word before editing or
deleting any keystrokes.
38
39
Entering text
Entering text
List of characters available:
key Characters in the Order Displayed
Including a number
You can include a number between letters without
exiting T9 English mode. Press and hold the
corresponding number key.
. @ , : ? - ; ’ / ( ) !
% &
< > _ + = ” \ { } $ [ ] 1
Scrolling
To move the cursor to the left or right through your
text, press the Left or Right key.
Clearing letters and words
Press the
C
key once or repeatedly to clear letters
one by one to the left. Press and hold the
erase all of the letters on the display.
C
key to
Using Hebrew, English mode
(Capital Lock)
When typing in Hebrew and English mode, you
should press the key labeled with the letter you
want:
The cursor moves to the right when you press a
different key. When entering the same letter twice
or a different letter on the same key, just wait for
about four seconds, and enter the next letter.
- once for the first letter
- twice for the second letter
- and so on.
Changing the letter-case
This method is called Multi-tap typing.
Note: This feature is available only in Alphabet
mode.
For example, you need to press the
2
key three
times quickly to display the letter “C” and the
two times quickly to display the letter “K.”
5
key
To shift case of the next letter(s) that you type,
press the
• Initial Capital (Abc
• Capitals Lock (ABC
• Lower Case (abc
key. There are three cases:
Refer to the table below for the list of characters
assigned to each key.
)
)
)
40
41
Entering text
Entering text
Inserting a space
Using Symbol mode
Press the
key to insert a space between words.
Symbol mode enables you to enter symbols into
your text.
Including a number
Press the Left or Right key to display more symbol
sets.
You can quickly include a number between letters.
Press and hold the corresponding number key.
Press the keys corresponding to the mark you want,
and manually switch back to the text entry mode of
your choice. See page 37 for changing the text
input mode.
Scrolling
To move the cursor to the left or right through your
text message, press the Left or Right key.
Clearing letters and words
Using Number mode
Press the
C
key once or repeatedly to clear letters
one by one to the left. Press and hold the
erase all of the letters on the display.
C
key to
Number mode enables you to enter numbers into
your text. Press the keys corresponding to the
digits you want, and manually switch back to the
text entry mode of your choice. See page 37 for
changing the text input mode.
42
43
Using the menus
Using the menus
The phone offers a range of functions that allows
you to tailor it to your needs. These functions are
arranged in menus and submenus.
Using shortcuts
The menu items, such as menus, submenus, and
setting options, are numbered and can be accessed
quickly by using their shortcut numbers.
The menus and submenus can be accessed by
scrolling or using the shortcuts.
Note: The numbers assigned to each menu function
are indicated on the list on page 46.
1. In Standby mode, press the Menu soft key to
Accessing a menu function by
scrolling
access the menu mode.
2. Enter the first digit of the shortcut number.
Repeat this for each digit of the shortcut
number.
1. In Standby mode, press the Menu soft key to
access the main menu mode.
Example: Changing the display language
2. Scroll using the Navigation keys to reach a main
menu, for example, Settings. Press the Select
soft key to enter the menu.
Press the
7,
2, and
6
2
keys.
7
enters Settings
,
selects Display, and
6
selects Language/
.
3. Find the menu option you want, for example,
Display, by scrolling using the Up or Down key.
Press the Select soft key to enter the menu
option.
3. Scroll using the Navigation keys to select the
setting of your choice.
4. Press the Save soft key to confirm the chosen
If the menu you have selected contains
setting.
submenus, such as Language/
, repeat
this step.
4. Scroll using the Navigation keys to select the
setting of your choice.
5. Press the Save soft key to confirm the chosen
setting.
Notes
:
• To return to the previous menu level, press the
key.
C
• You can exit the menu without changing the menu
settings by pressing the key
.
44
45
Using the menus
Using the menus
4. Scheduler (see page 77)
List of menu functions
4.1 Calendar
4.2 Alarm Set
4.3 Set time
4.3.1 Main clock
4.3.2 Dual clock
4.4 Calculator
4.5 Today
The following list shows the menu structure and
indicates the number assigned to each option.
1. Calls (see page 51)
1.1 Missed
1.2 Incoming
1.3 Outgoing
1.4 Air Time
1.4.1 Last Call
1.4.2 Total
4.6 To Do List
4.7 World time
4.8 Countdown
4.9 Memo pad
1.4.3 Life Time
1.4.4 Erase Total
5. Games (see page 88)
5.1 Chicken run
5.2 Mobile cop
2. Phone book (see page 54)
2.1 Find
2.2 Add
2.3 Group Set
2.4 My Phone #
6. Voice Tools (see page 91)
6.1 Voice Memo
6.1.1 Record
6.1.2 Review
6.2 Voice Answer
6.2.1 On/Off
3. Message (see page 63)
6.2.2 Voice Messages
6.2.3 Setting
3.1 Text MSG
3.1.1 New Message
3.1.2 Inbox
3.1.3 Outbox
6.2.3.1 Greeting
6.2.3.2 Screening
6.2.3.3 Wait Time
3.1.4 Saved Msg
3.2 MMS
3.2.1 New Message
3.2.2 Inbox
3.2.3 Outbox
3.2.4 Draftbox
3.2.5 MMS Alert
3.3 Voice Mail
3.4 Msg Setup
3.4.1 Scroll Timer
3.4.2 Msg. Reminder
3.4.3 Alert on call
3.4.4 SMS Message
3.4.5 MMS Message
3.4.6 Msg. Templates
46
47
Using the menus
Using the menus
7. Settings (continued)
7.6 Data/Fax Mode
7.7 Memory status
7.7.1 Melodies
7. Settings (see page 96)
7.1 Sounds
7.1.1 Ringer
7.1.1.1 Voice calls
7.1.1.2 Messages
7.7.2 Animations
7.1.1.3 Alarm/Scheduler
7.1.2 Ringer Volume
8. VAS (see page 110)
7.1.2.1 Voice calls
7.1.2.2 Messages
7.1.2.3 Alarm/Scheduler
8.1 Internet Portal
8.2 Games & App.
8.3 Ringtone
8.3.1 Download New Ringtone
8.3.2 Saved Ringtones
8.4 Animation
8.4.1 Download New Animation
8.4.2 Saved Animation
8.5 Voice Portal
8.6 SMS INFO
8.6.1 News
7.1.3 Key tone
7.1.3.1 Tone Type
7.1.3.2 Volume
7.1.4 Function alert
7.1.5 Hour alert
7.1.6 Power On/Off
7.1.7 Voice volume
7.2 Display
7.2.1 Image box
7.2.1.1 Turning on
8.6.2 Sport
8.6.3 Entertainment
8.6.4 Fun
8.6.5 Finance
8.6.6 Astrology
7.2.1.2 Turning off
7.2.1.3 Wallpaper
7.2.2 Banner
7.2.3 Backlight
8.7 GPS
7.2.4 External Clock
7.2.5 Service LED
7.2.6 Language/
8.7.1 Voice Navigation
8.7.2 Speed Traps Detector
8.7.3 Where Is My Kid
8.7.4 Emergency Button
7.3 Auto retry
7.4 Answer mode
7.5 Security
8.8 What’s new?
7.5.1 Phone lock
7.5.2 Change code
7.5.3 Emergency #
7.5.4 Restriction
7.5.4.1 Outgoing calls
7.5.4.2 Phone Book
7.5.5 Clear memory
7.5.5.1 Phone book
7.5.5.2 Messages
7.5.6 Reset phone
7.5.6.1 Function Only
7.5.6.2 All
48
49
Using the menus
Calls
You can use the Calls menu to:
9. Camera (see page 120)
9.1 Take photo
9.2 Record video
9.3 Photo album
9.4 Video album
9.5 MMS
9.5.1 New Photo
9.5.2 Album
9.6 Settings
• view and dial the last missed, outgoing, or
incoming numbers.
• view the duration of calls.
• set the phone to receive the second call or to
forward incoming calls to the preset number.
9.6.1 Resolution
9.6.2 Fun frames
9.6.3 Color tones
9.6.4 Shutter sound
9.6.5 Quality
Missed (Menu 1-1)
9.7 Memory status
If Caller Line Identification is available, your phone
keeps a list of the 30 most recent incoming calls
that you failed to answer. Contact your service
provider for the availability.
In-Call menu (see page 34)
1: Mute/Quit
2: Calls
When you press the Menu soft key on the call log
list, the following options are available:
2.1: Missed
2.2: Incoming
2.3: Outgoing
2.4: Air Time
3: Phonebook
3.1: Find
Erase: erases the selected number.
Erase all: erases all of numbers.
1. Press the Up and Down keys to find a number or
name, if saved in Phone book.
3.2: Add
3.3: Group Set
3.4: My Phone #
4: Silent/Quit
5: Send My #
6: DTMF Length
2. Press the Select soft key to select the
highlighted number. The dialed number, or name
if stored in Phone book, displays.
50
51
Calls
Calls
Outgoing (Menu 1-3)
The phone stores up to 30 of the most recent calls
you have dialed. When you access this menu, a list
of the outgoing calls displays.
3. To
Press the
place a call
key.
use the menu
options
Menu soft key. For
details about the options,
see below.
For further details about scrolling through the list
and accessing the call log, see “Missed” on page 51.
view other calls
Navigation keys.
key.
Air Time (Menu 1-4)
return to Standby
mode.
Your phone records the amount of air time, or talk
time, used. Using this option, you can view the
number of the calls to or from your phone and the
air time for all calls. You can easily erase the air
time record at any time.
When you access the menu options, the following
options are available:
Talk: dials the selected number.
Note: This feature is not intended to be used for
Save: allows you to save the number in Phone
book.
billing purposes.
The following options are available:
Prepend: allows you to add an area code or
feature code to the number before calling the
number.
Last Call: shows the air time of the last call.
Total: shows the number of all calls you have made
to or from your phone and the total duration of the
calls since the air time counter was last set to zero
by using the Erase Total option.
Erase: allows you to erase the selected number.
Incoming (Menu 1-2)
Life Time: shows the number and total duration of
all calls you have made to or from your phone since
the phone was shipped from the factory.
This menu lets you view up to 30 of the most recent
calls you have received if you are subscribed to the
Caller Line Identification service. Contact your
service provider for more information about this
service. When you access this menu, the list of the
incoming calls displays.
Erase Total: erases the “Total” air time
measurement and resets the air time counter.
For further details about scrolling through the list
and accessing the call log, see “Missed” on page 51.
52
53
Phone book
Phone book
4. If necessary, press the Up or Down key to scroll
through the entries.
You can store phone numbers and their
corresponding names in the memories of your
phone. The phone memories, although physically
separate, are used as if they were a single entity,
called Phone book.
5. When an entry highlights:
• Press the
key to place a call to the entry’s
speed-dial number.
• Press the Menu soft key to access the
following options:
Find (Menu 2-1)
-
Edit: edits the entry’s phone number, name,
location number, and other information.
This menu allows you to find an entry using a
person’s name, entry number, group name, or
memory location.
-
-
Erase: erases the entry.
Add New: adds a number to Phone book.
You can create a new entry or add it to an
existing entry. For more information on how
to add a number, see page 57.
Note: You can quickly access this menu by pressing
the Right key in standby mode.
To change the finding method, press Left or Right
key until the option you want to use displays; By
• Press the OK soft key to select the entry.
Information about the entry displays. Move to
each item by pressing the Up or Down key.
Name By Entry, or By Group.
,
Finding an entry by name
Press the Menu soft key to use one of the
following options:
When you select this method, the whole list of all of
Phone book entries appears in alphabetical order.
-
Talk: dials the number labeled as speed-dial
number.
1. If necessary, press the Left or Right key to scroll
-
-
Edit: allows you to change the selected item.
to By Name
.
Erase: erases the entry. If you select one of
numbers for the entry, only the number is
erased.
2. If necessary, press the Down key to highlight the
name input box.
3. Enter the first few letters of the name you want
to find.
• Press the
screen.
C
key to return to the previous
Your phone highlights the first matching name.
• Press the
key to exit the menu.
If you want to find a Hebrew name, press the
Menu soft key and select Hebrew and press the
Select soft key.
54
55
Phone book
Phone book
Finding an entry by entry number
Add (Menu 2-2)
When you select this method, the whole list of all of
the Phone book entries appears in numeric order.
This menu allows you to add a new entry to your
Phone book by saving a phone number, an e-mail
address, or a memo.
1. Press the Left or Right key to scroll to By Entry
.
2. Press the Down key to highlight the number
input box.
Adding a new entry using a number
1. After accessing the Add menu (Menu 2-2),
select Number from the pop-up list and press
the Select soft key.
3. Enter the location number of the entry you want
to find.
4. Follow the procedure from step 4 on page 55.
2. Enter a number you want to save and press the
Save soft key.
Finding an entry by group
3. When New Entry highlights, press the Select
When you select this method, a list of the Phone
book entries in a group appears.
soft key.
4. Enter a name and press the OK soft key.
1. Press the Left or Right key to scroll to By
For more information about how to enter
characters, see page 37.
Group
.
2. Press the Down key to move the group selection
field.
5. Choose a type icon, Home Office, Mobile,
,
Pager, or Fax, using the Navigation keys and
press the Select soft key.
3. Press the Left or Right key to select the group
you want.
6. Press the Up or Down key and change the
setting or enter more information, if necessary.
Each time you select a group, a list of the
associated entries displays.
•
Name: Press the Edit soft key to change the
name.
4. Follow the procedure from step 4 on page 55.
•
Location number: The first available location
number displays. If necessary, change the
location number using the Left or Right key.
•
Home/Office/Mobile/Pager/Fax: You can
add numbers for each category or change the
current number.
56
57
Phone book
Phone book
•
•
E-Mail1/E-Mail2: Press the Edit soft key to
enter an e-mail address. For more information
about how to enter characters, see page 37.
Saving a phone number from Standby
mode
1. In Standby mode, enter a number you want to
save.
URL: Press the Edit soft key to enter an URL
address. For more information about how to
enter characters, see page 37.
Or, press the
key to end the call. The call
time and the phone number display.
•
•
•
Memo: Press the Edit soft key to store
additional information about the person.
2. Press the Save soft key.
Speed Dial: allows you to select one of the
stored numbers for speed dialling.
3. When New Entry highlights, press the Select
soft key.
Group: Select one of the default relation
groups, where the entry is included. Grouping
the entries enables you to search for a number
in the group. See page 62.
If you want to add a number into an existing
entry, select Pbook Entry and press the Select
soft key. To complete storing the number, follow
the procedure from step 4 on page 60
.
•
•
Ringer: Press the Menu soft key to select a
unique ringer melody for the entry. By
selecting a different tone for each entry,
incoming voice calls having a caller ID can be
distinguished from those that do not.
4. Enter a name and press the OK soft key.
For more information about how to enter
characters, see page 37.
Caller Image: Press the Menu soft key to
select a character image to show on the
external display when a call comes in from the
number.
5. Follow the procedure from step 5 on page 57.
Adding a number into an existing entry
You can store up to 5 numbers for a name saved in
the phone’s memory by assigning them to the
different types.
7. Repeat step 6 until you complete the contact
information of the entry.
8. Press the Save soft key to save the entry.
1. After accessing the Add menu (Menu 2-2),
select Number from the pop-up list and press
the Select soft key.
After storing, the phone displays the memory
status of Phone book for a few seconds and goes
to the Phone book list.
2. Enter a number you want saved and press the
Save soft key.
3. Select Pbook Entry and press the Select soft
key.
58
59
Phone book
Phone book
4. Find the name you want using the Up and Down
Adding a new entry using a memo
keys and press the OK soft key.
You can make a memo about a person as a Phone
book entry.
5. Select a type icon by pressing the Navigation
keys and press the Select soft key.
1. After accessing the Add menu (Menu 2-2),
select Memo from the pop-up list and press the
Select soft key.
6. Follow the procedure from step 6 on page 57.
When the confirmation message to overwrite the
entry appears, select Yes and press the Select
soft key.
2. Enter a memo and press the OK soft key.
For more information about how to enter
characters, see page 37.
Adding a new entry using an e-mail
address
3. When New Entry highlights, press the Select
soft key.
You can store an e-mail address as a Phone book
entry.
Note: To add the memo to an existing entry, select
Pbook Entry. Find the name from the
1. After accessing the Add menu (Menu 2-2),
select E-mail from the pop-up list and press the
Select soft key.
Phone book list and press the OK soft key.
4. Enter a name and press the OK soft key.
5. Follow the procedure from step 6 on the page 57
2. Enter the e-mail address and press the OK soft
key.
For more information about how to enter
characters, see page 37.
3. When New Entry highlights, press the Select
soft key.
Note: To add the address to an existing entry,
select Pbook Entry. Find the name from
the Phone book list and press the OK soft
key.
4. Enter a name and press the OK soft key.
5. Follow the procedure from step 6 on page 57.
60
61
Phone book
Message
Group Set (Menu 2-3)
Your phone can receive voice mail messages, text
messages, and web messages from your web
server. Your phone can also send text messages if
your system supplier provides this service.
This menu allows you to change a relation group’s
name.
Note: You can’t change the name of
.
Incoming messages are received even when your
phone is in Lock mode. The screen displays
information about the message. To access the
message, you need to unlock the phone.
1. On the Group Set list, press the Up or Down key
to select the group you want to rename and
press the Select soft key.
Note: You can quickly access the Message menu by
2. Press the
C
key to erase the old group name.
pressing the Left key in standby mode.
3. Enter a name and press the OK soft key to save
the new name.
Text MSG (Menu 3-1)
For more information on how to enter
characters, see page 37.
You can create an SMS(Short Message Service)
message and send it to other mobile phones.
My Phone # (Menu 2-4)
New Message (Menu 3-1-1)
This menu shows your phone number.
You can create short text messages and send them
to multiple mobile phones.
This number is sent when you choose the
Send My # option during a call.
Note: Message transmission is available only when
your phone is operating in a digital network and
if service is supported by your service provider.
Note: You can quickly access the New Message
menu by pressing and holding the Left key in
standby mode.
1. Enter the message contents and press the OK
soft key.
For more information on how to enter
characters, see page 37.
62
63
Message
Message
You can use up to 20 canned messages by
text notification and rejects additional incoming
pressing the Mode soft key and selecting
messages until you erase the obsolete ones.
Templates For details, see page 76.
When the phone receives a text message, the New
Text Message icon ( ) and a text notification with
the call back number appear. Press the Select soft
key to view the message immediately.
2. Select one of the following options, and press
the OK soft key.
•
•
Save & Send: allows you to save a copy of
the message and then send the message to
the required destination. You can read the
message in your Outbox.
When you access the Inbox menu, a list of the
received message displays. An icon displayed in the
list means the message’s status:
•
•
: displays when you have read the message.
: indicates that a duplicated message.
Save: allows you to save the message so that
it can be sent later. You can read the message
in your Saved Msg box.
While viewing the message list, press the Up or
Down key to scroll to a message and:
3. Enter a phone number.
If you press the Find soft key, you can search
your Phone book for a number.
• Press the View soft key to view the message you
want. The phone displays the contents. If
necessary, press the Up or Down key to scan
through the message.
4. To send the message to multiple destinations,
press the Down key and enter another number.
While viewing a message, press the Menu soft
key to use the following options:
Repeat this step to add more destinations. You
can send the message to up to 10 destinations
at one time.
Reply: allows you to send a reply message to
the sender.
5. When you have finished entering the numbers,
press the OK soft key to send or save the
message.
Forward: allows you to send the message to
other people.
Call/Save: shows the sender’s number of the
Your phone informs you of whether or not the
message was successfully sent, and returns to
the Text MSG menu screen.
message. Press the
key to make a call to
the sender’s phone number. Press the Save soft
key to save it.
Erase: erases the message from your Inbox.
Inbox (Menu 3-1-2)
Protect: the Locked option allows you to keep
the message from being deleted. They will not
be erased until you unlock by using the
Unlocked option.
Your phone can store SMS messages and their
corresponding Caller ID in your phone’s memories.
When your memory is full, the screen displays a
64
65
Message
Message
• Press the Reply soft key to send a reply message
• Press the Resend soft key to send the message
to the sender.
to other people.
• Press the Menu soft key to access the following
• Press the Menu soft key to use the following
options:
options:
Erase: allows you to erase the selected
Erase: allows you to erases the selected
message.
message.
Erase Multi: allows you to erase the messages
Erase Multi: allows you to erases the messages
you selected by pressing the Check soft key.
you selected by pressing the Check soft key.
Erase all: allows you to erase all of the
Erase all: allows you to erases all of the
messages.
messages.
Outbox (Menu 3-1-3)
Saved Msg (Menu 3-1-4)
Your phone can store your outgoing SMS messages
in your phone’s memories.
Your phone can store draft messages that are yet to
be sent in the Draft box. If you save the message
contents before sending, you can access them using
this menu.
When you access the Outbox menu, you can see
the message list.
While viewing the message list, press the Up or
Down key to scroll to a message and:
To review a stored message, press Up or Down key
to scroll to it and press View soft key.
• Press the View soft key to view the message you
want. The phone displays the contents. If
necessary, press the Up or Down key to scan
through the message.
While viewing a message, press the Resend
soft key to send the message to other people.
While viewing a message, press the Menu soft
key to use the following options:
While viewing a message, press the Menu soft
key to use the following options:
Resend: allows you to send the message to
other people.
Resend: allows you to send the message to
other people.
Call/Save:shows the sender’s number of the
Call/Save: shows the destination number of
message. Press the
key to make a call to
the message. Press the
key to make a call to
the sender’s phone number. Press the Save soft
key to save it.
the recipient’s phone number. Press the Save
soft key to save it.
Erase: erases the message from your Saved
Msg.
Erase: erases the message from your Outbox.
66
67
Message
Message
• Press the Menu soft key to access the following
5. Enter a subject and press the OK soft key.
options:
6. Press the Down key to move the Picture field
Erase: allows you to erase the selected
message.
and press the Menu soft key.
The following options are available:
Erase Multi: allows you to erase the messages
you selected by pressing the Check soft key.
•
•
•
•
Take Photo: allows you to take a new photo
using the camera.
Erase all: allows you to erase all of the
messages.
Album: allows you to select a photo from the
Photo album.
Saved Img: allows you to select one of
images you have received by MMS message.
MMS (Menu 3-2)
Erase: remove the image from the slide.
MMS (Multimedia Message Service) allows you to
send or receive a message containing an image or a
sound. It provides delivery of multimedia messages
from phone to phone or from phone to e-mail.
7. Select an option and take a photo or add an
image.
For details about the camera, see page 120.
8. Press the Down key to move the Message field
New Message (Menu 3-2-1)
and press the Edit soft key.
In this menu, you can create and send a new
message.
9. Enter a message text and press the OK soft key.
10. Press the Down key to move to the Sound field
1. When the Send To field highlights, press the
and press the Menu soft key.
Menu soft key.
The following options are available:
Note: You can select a address type, Send To, Cc,
or Bcc, by pressing the Left or Right key.
•
•
•
•
•
Voice Rec: allows you to record a new voice
memo.
2. Select Phonebook to retrieve a phone number
or an e-mail address from your Phone book, or
Input to an enter one.
Voice Memo: allows you to select one of voice
memos you have recorded.
Melody: allows you to select one of the
default melodies.
3. Choose a number or an address or enter one,
and then press the OK soft key.
Saved Snd: allows you to select one of
sounds you have received by MMS message.
4. Press the Down key to move to the Subject field
and press the Edit soft key.
Erase: remove the sound from the slide.
68
69
Message
Message
11. Select an option and then record a memo or
select a sound.
Inbox (Menu 3-2-2)
When a new MMS message has arrived, an MMS
alert appears. You can select Yes to download the
message from the MMS server or No to check the
message at a later time. If you select Yes, the
message will be saved in the Inbox.
For details about the voice memo, see page 91.
12. If you want to add or remove a slide, move to
the Slide field and press the Menu soft key.
The following options are available:
When you access the Inbox, the list of the retrieved
messages displays. On the message list, you can
access the following options by pressing the Menu
soft key:
•
•
•
Add: adds a new slide.
Erase: erases any added slides.
Duration: allows you to set the length of time
Erase: allows you to erase the currently selected
message.
the currently selected slide displays.
13. When you have finished the MMS message,
Erase All: allows you to erase all of the messages
in the Inbox.
press the OK soft key.
The following options are available:
Select a message from the list and press the OK
soft key to read it. The phone presents the message
contents. If a sound file is attached, it plays. On the
message presentation screen, you can access the
following options by pressing the Menu soft key:
•
•
•
Preview: shows the message you created.
MMS Edit: allows you to change the message.
Options: allows you to set message options;
for details on each option, see page 75.
Reply: allows you to send a reply to the sender.
•
Save in Draft: saves the message in the Draft
box.
Reply all: allows you to send a reply to the sender
and all of the recipients.
14. When you are satisfied, press
1
or select
Forward: allows you to forward the message to
other people.
preview and press the OK soft key.
The phone displays your message.
Erase: allows you to erase the message.
15. Press the Send soft key to send it.
Info: shows the information of the message.
Save Img: saves an image from the message to
the phone's memory.
Save Snd: allows you to save a sound from the
message to the phone's memory.
Protect: protects the message so that it will not be
erased.
70
71
Message
Message
Outbox (Menu 3-2-3)
MMS Alert (Menu 3-2-5)
From this menu, you can access the list of the
messages you have sent. On the message list, you
can access the following options by pressing the
Menu soft key:
When a new MMS message has arrived, an MMS
alert appears. You can select Yes to download the
message from the MMS server or No to check the
message at a later time. If you select No, the alert
saved in the MMS Alert box.
Erase: allows you to erase the currently selected
message.
Select an alert from the list and press the OK soft
key.
Erase All: allows you to erase all of the messages
in the Inbox.
To retrieves the message from the MMS server,
press the Download soft key.
Select a message from the list and press the OK
soft key. The phone presents the message
To erases the MMS alert, press the Erase soft key.
contents. If a sound file is attached, it plays. On the
message presentation screen, you can access the
following options by pressing the Menu soft key:
Voice Mail (Menu 3-3)
Resend: allows you to resend the message.
Erase: allows you to erase the message.
Info: shows the information of the message.
When you receive a voice message the
corresponding text notification displays. Press
and the phone dials the voice mail center.
Protect: locks/unlocks the message so that it is not
erased.
Note: Press and hold the right soft key to dials the
voice mail center in Standby mode.
Draftbox (Menu 3-2-4)
If multiple new voice messages are received but not
checked, information of the last one will be
displayed. The information display includes the
time/date stamp and the number of new voice
messages.
From this menu, you can access the messages you
have saved before sending or you have tried.
Select a message from the list and press the OK
soft key. the message opens in Edit mode so that
you can change and send it.
72
73
Message
Message
Alert on call (Menu 3-4-3)
Msg Setup (Menu 3-4)
This menu allows you to choose whether or not the
phone informs you when you receive a new
message during a call.
Using this menu, you can set up various options for
receiving or sending messages.
Off: the phone doesn’t actively alert you to
incoming messages. It only displays the
corresponding notification.
Scroll Timer (Menu 3-4-1)
If an incoming message is too long for the display,
the phone scrolls the screen automatically. You can
set the time interval in which the phone scrolls to
On: the phone alerts you with a beep and displays
the corresponding notification.
the next screen,
1
through
5
seconds.
When this option is set to Off, you need to manually
scroll to the next screen using the Up or Down key.
SMS Message (Menu 3-4-4)
You can set up the following options as default
settings when creating a new message.
Msg. Reminder (Menu 3-4-2)
Delivery Ack: allows you to activate or deactivate
the delivery acknowledgement feature. When this
feature is activated, the network informs you when
your message is delivered to the recipient. Select
On to turn the feature on, or Off to turn it off.
When a message is received, your phone alerts you
by sounding the specified ringer. You can set how
often this will happen.
Off: The phone alert only once when you receive an
incoming message.
MMS Message (Menu 3-4-5)
Once: The phone alerts you when you receive an
incoming message and then alert you again after 2
minutes.
You can change the default settings for sending and
receiving MMS messages.
Every 2 min: The phone alerts you every 2
minutes when you receive an incoming message.
Priority: allows you to select a message priority.
Expiry: allows you to set the lengh of time your
messages are stored in the MMS server while
attemps to deliver them.
Delivery Time: allows you to select time delay
before the MMS server sends messages.
Sender Visibility: allows you to set whether your
phone number will be seen on recipients’ phones.
74
75
Message
Scheduler
The Scheduler feature enables you to:
Delivery Report: allows you to request that the
network inform you when your message has been
delivered.
• keep track of important dates and events.
• set the phone to ring at a specified time.
• set the current time and date.
Read Reply: allows you to request that the
network inform you when the recipient reads your
message.
• use the phone as a calculator.
Retrieval Mode: allows you to set how you want to
retrieve incoming MMS messages. With this option
is set to auto, the phone retrieves MMS messages
from the MMS server immediately at the time of
their arrival. When you select prompt, the phone
shows a prompt so that you can choose to retrieve
the message.
• create a list of things to do or memos.
• check the current time in another part of the
world.
• set and count down to a particular day or event.
• make a memo.
Note: When you are out of your service area, you
cannot use some of the features in the
Scheduler menu.
Msg. Templates (Menu 3-4-6)
Your phone has 11 preset messages to enable you
to use them when writing a new message. You can
change them, if necessary.
Calendar (Menu 4-1)
You can also add up to 9 messages.
This menu allows you to view the current month, as
well as the past or future month in the calendar
format. You can be alerted by the Calendar function
before an event commences. When you access this
menu, today’s date is automatically selected the
date in lunar calendar displays on the bottom.
1. Press the Navigation keys to highlight the
message you want to change.
To add a new message, select an empty
location.
2. Press the Select soft key.
Selecting a day on the calendar
3. Clear the existing message using the
necessary, enter a new message.
C
key, if
• You can move to the next or the previous day by
pressing the Left or Right key.
For further information on how to enter text, see
page 37
• You can move up or down the Calendar one week
by pressing the Up or Down key.
• To display the next or previous month, use the
Volume keys on the left side of the phone.
4. Press the OK soft key to save the message.
76
77
Scheduler
Scheduler
On the Calendar screen, press the Menu soft key to
use the following options:
Viewing your schedule
Days with scheduled events are seen in a rectangle
on the calendar when you access the Calendar
menu (Menu 4-1). Select one of them and press
the OK soft key. The first of the events for date
appears.
View: allows you to view the scheduled events of
the day.
Add new: allows you to add a new event on the
selected day.
Highlight to the event you want to view by pressing
the Left or Right key. If necessary, press the Down
key to display the end time of the event.
Scheduling an event
You can schedule up to 9 events for one day and 20
events total.
While viewing an event, press the Menu soft key to
use the following options:
1. Select a day from the calendar, referring to
“Selecting a day on the calendar” on page 77,
and press the OK soft key.
Add new: adds a new event.
Edit: edits the selected event.
Erase: erases the selected event.
Erase All: erases all of the events.
2. Enter your event contents and press the OK soft
key.
For more information about how to enter
characters, see page 37.
3. Enter the start time and date using the numeric
keys and press the Down key.
Notes
:
• You need to enter the time in 24-hour format.
• You can move through the input fields using the
Left or Right key.
4. Enter the end time and date using the numeric
keys and press the Down key.
5. Specify when an alarm will inform you of your
event by pressing the Left or Right key. If you
select No alarm, the phone does not ring the
alarm.
6. Press the Save soft key to save your event.
78
79
Scheduler
Scheduler
Alarm Set (Menu 4-2)
Set time (Menu 4-3)
This menu allows you to set the alarm to ring at a
specific time.
This menu allows you to set the current date and
time. The following options are available:
To set the alarm:
Main clock
1. Select the alarm frequency option by pressing
the Navigation keys.
You can set the current time. When you select this
menu, the current settings, if set, displays. In a
service area, you don’t need to change the time and
date setting.
•
Once: The alarm rings only once and is then
deactivated.
•
Daily: The alarm rings everyday at the same
time.
1. Enter the current time and date using the
numeric keys.
2. Press the Save soft key.
The month, day, hour, and minute must each be
entered using 2 digits and the year requires all
four digits.
3. Enter the time for the alarm to ring by using the
numeric keys.
Notes
:
Notes
:
• You need to enter the time in 24-hour format.
• You can move through the input fields using the
Up or Down key.
• You need to enter the time in 24-hour format.
• You can move through the input fields using the
Left or Right key.
2. When you finish, press the Save soft key.
4. Press the Save soft key.
Dual clock
To stop the alarm when it rings, simply open and
close the phone or press any key.
You can choose two time zones to be displayed
when you select Dual clock for the Wallpaper
image in the Wallpaper menu (Menu 7-2-1-3).
You can also set the daylight saving time for the
selected time zones.
To deactivate the alarm, access the Alarm Set
menu, and select Off and press the Save soft key.
To select time zones for the dual clock:
1. When Location highlights, press the Down key.
2. Select the time zone for the left clock by
pressing the Left or Right key and press the
Down key.
80
81
Scheduler
Scheduler
3. Select the time zone for the right clock by
pressing the Left or Right key.
Calculator (Menu 4-4)
Using this feature, you can use the phone as a
calculator. The calculator provides the basic
arithmetic functions; addition, subtraction,
multiplication, and division.
4. Press the Save key.
To apply the daylight savings:
1. When Location highlights, press the Left or
Right key to select Summer Time. Press the
Down key.
To perform a calculation:
1. Enter the first number using the numeric keys.
2. Select On to use the daylight saving time for the
Note: Use the
key to enter a decimal point and
left clock. Otherwise, select Off
.
the
key to change the sign of a number
to a negative (-).
3. Press the Down key and repeat step 2 for the
right clock.
2. Select the operation for your calculation by
pressing the Navigation keys according to the
4. Press the Save key.
illustration on the display;
(multiply), (divide).
+
(add),
-
(subtract),
x
÷
3. Enter the second number.
4. To get the result, press the OK soft key.
5. Repeat steps 1 to 4 as many times as required.
Today (Menu 4-5)
This menu allows you to schedule new events for
the current day, indicating each event’s start and
end time. Events scheduled for future dates
automatically appear on your Today display for that
particular day.
For further details about scheduling and viewing
events, refer to “Calendar” on page 77.
82
83
Scheduler
Scheduler
While viewing a task, press the Menu soft key to
use the following options:
To Do List (Menu 4-6)
This feature allows you to enter up a list of tasks
you need to do and assign both a priority and a
deadline to them. You can store up to 20 tasks.
Add new: adds a new task.
Edit: edits the selected task.
Erase: erases the selected task.
Erase All: erases all of the tasks.
Creating a to-do item
1. Enter the task contents and press the OK soft
key.
World time (Menu 4-7)
For more information about how to enter
characters, see page 37.
You can use this menu to find out what time it is in
another part of the world and apply the DST
(Daylight Saving time).
2. Select High or Low priority using the Left or
Right key and press the Down key.
Press the Navigation keys to scroll to the time zone
you want to check.
3. Enter the time and the date when your task
needs to be done using the numeric keys.
To apply the daylight saving time:
Notes
:
• You need to enter the time in 24-hour format.
• You can move through the input fields using the
Left or Right key.
1. After selecting the time zone you want to apply
the DST, press the DST soft key.
2. When a confirmation message appears, select
Yes and press the Select soft key. The DST icon
appears on the left side of the time.
4. Press the Save soft key to save the task.
Viewing a task
When you access the To Do List menu (Menu 4-
6
), the list of tasks displays along with deadline and
the associated priority highlighted: for high
priority or for low priority.
Scroll to the task you want to view by pressing the
Left or Right key.
84
85
Scheduler
Scheduler
Add new: creates a new timer.
Edit: edits the selected timer.
Erase: erases the selected timer.
Erase All: erases all of timers.
Countdown (Menu 4-8)
This menu helps you know how much time it takes
for you to do something or how many months,
days, hours, and/or minutes until a specific event
occurs. You can create up to 20 Countdown timers
using this feature.
Memo pad (Menu 4-9)
Creating a countdown timer
This feature allows you to make memos of
important things you need to remember.
1. Enter a name for your Countdown timer and
press the OK soft key.
For more information about how to enter
characters, see page 37.
Writing a new memo
1. Enter what you need to remember.
2. Enter the time and date from which you want to
count down.
For further details on how to enter characters,
see page 37.
Notes
:
• You need to enter the time in 24-hour format.
• You can move through the input fields using the
Left or Right key.
2. Press the OK soft key to save the memo.
• You can enter between 1981 and 2099 for the
year.
Viewing a memo
The list of your memos displays when you access
3. Press the Save soft key to save the timer.
the Memo pad menu (Menu 4-9).
To view details, press the Navigation keys to scroll
to the memo you want to view from the list and
press the Select soft key.
Viewing a countdown timer
The list of Countdown timers displays when you
access the Countdown menu (Menu 4-8).
On the Memo pad list, press the Menu soft key to
use the following options:
Scroll to the timer you want to view by pressing the
Left or Right key.
Add new: adds a new memo.
Edit: edits the selected memo.
Erase: erases the selected memo.
Erase All: erases all of memos.
While viewing a timer, press the Menu soft key to
use the following options:
86
87
Games
Games
Using the Games, you can enjoy games using your
Chicken run (Menu 5-1)
phone.
The goal of this game is to move eggs or chicks to
the destination carefully.
You can enjoy games using your phone.
To start a game:
When you select NEW GAME menu, the first screen
displays two menus.
1. Press the Navigation keys to scroll to one of the
Select START menu to start a new game.
games and press the Select soft key.
Select OPTION menu to change following options.
2. Press any key except for the
key.
DIFFICULTY: allows you to change the game’s
The phone displays the following options:
level of difficulty.
•
•
NEW GAME: allows you to start a new game.
SOUND: allows you to turn the game sound on or
off.
HIGH SCORE: shows you the high score
table.
VIBRATION: allows you to turn the vibration on or
off.
•
•
•
HELP: gives you the information about how to
play the game.
: allows you to exit the current screen.
KEY INFO: gives you the key helper screen to
play the game.
Once the game starts, you need to control blue and
red control items to move eggs or chicks carefully.
To control the blue items, press
press or Right key for the red ones. When you
complete the given aims, the level goes up and the
speed goes up.
1
or Left key, and
CONTINUE: allows you to continue the last
game you played. This option is activated only
when you have played a game.
3
3. While playing a game:
To
Press the
key.
key.
Mobile cop (Menu 5-2)
pause/resume the game
exit the game
C
The goal of this game is to shoot the enemies.
When you select NEW GAME menu, the first screen
displays three menus.
Select START menu to start a new game.
Select OPTION menu to change following options.
88
89
Games
Voice Tools
SOUND: allows you to turn the game sound on or
off.
In this menu, you can use the phone’s voice
features, allowing you to:
VIBRATION: allows you to turn the vibration on or
• record a voice memo.
off.
• set the phone to answer a call and record the
caller’s message.
: allows you to exit the current screen.
Select HELP menu to see the simple guide.
Once the game starts, enemies in red appear at
target position. Check the position and press
appropriate number key to shoot the enemy.
Voice Memo (Menu 6-1)
Record (Menu 6-1-1)
1
4
2
5
3
6
You can record up to voice memos of 4 minutes
total. This feature shares the memory with the
Voice Answer feature and the amount of time for
memos are dependent on the available memory
less any callers’ messages; for example, if your
phone has the callers’ messages of 4 minutes total,
you cannot record any voice memo.
Sometimes hostages may appear. If you shoot the
hostage, you will lose the bonus points.
1. Record a memo by speaking to the microphone.
After running out of the bullets, press
reload them.
7
,
8
or
9
to
When you are recording, a timer displays to
show you the elapsed time.
Whenever you kill all the enemies for one stage,
you can go to the next stage.
You can pause recording by pressing Pause soft
key and then Resume soft key.
2. Press the End soft key to end recording. The
screen provides you with the following choices.
Scroll to an option and press the Select soft
key.
•
Review: allows you to review the voice memo.
The screen displays the length of the memo.
90
91
Voice Tools
Voice Tools
•
Rerecord: allows you to discard the current
memo and record another one.
Voice Answer (Menu 6-2)
If you are not able to answer an incoming call, you
can set your phone to answer a call with the default
greeting message and record the caller’s message.
As this feature shares the memory with voice
memos, the total length of messages is dependent
on the available memory less any voice memos.
•
•
Save: allows you to save the voice memo.
Quit: allows you to quit recording the memo and
exit the Record menu.
3. When you are satisfied, select the Save option
and press the Select soft key.
Note: You can quickly access this menu by pressing
4. Enter a title for the memo and press the OK soft
the VA soft key in standby mode.
key.
On/Off (Menu 6-2-1)
Review (Menu 6-1-2)
This option allows you to enable or disable the
answering machine mode.
When a list of your voice memos displays, scroll to
the memo you want to review and press the Select
soft key. The phone plays back the memo.
Voice Messages (Menu 6-2-2)
On the memo list, press the Menu soft key to use
You can listen to the callers’ messages recorded in
your phone. When you access this option, a list of
the recorded messages appears.
the following options:
Play: plays back the memo.
Info: shows detailed information about the memo,
such as title, length, memory size and date and
time when the memo was recorded.
Note: If the phone has the callers’ messages waiting
to be checked, it displays the total number of
the messages when the last message was
recorded.
Erase: erases the selected memo.
On the message list, press the Menu soft key to the
following options:
Erase All: erases all of the memos.
Play: plays the selected message.
Info:shows detailed information about the
message, such as caller’s number if identified,
elapsed time, memory size and date and time when
the message was recorded.
Erase: erases the selected message.
Erase All: erases all of the messages.
92
93
Voice Tools
Voice Tools
Screening: allows you to enable or disable the
screening speaker which allows you to listen to the
caller’s message while the caller is leaving it.
Setting (Menu 6-2-3)
You can change the settings for the voice answer
mode. The following options are available:
Wait Time: allows you to set how long the phone
waits before answering a call with the greeting
message. Selecting Immediate means that the
phone plays back the message as soon as a call
comes in.
Greeting: Your phone provides you with the default
greeting message to be played when a call comes
in. You can also record your own greeting message.
To record a greeting message:
1. Select Record and press the Select soft key.
2. Wait until a beeping prompt sounds and record a
greeting message by speaking into the
microphone.
You can pause recording by pressing Pause soft
key and then resume by pressing Resume soft
key.
3. When recording is complete, press the End soft
key. The phone automatically saves and
activates the message.
If you want to play back the currently selected
message, highlight Play and press the Select soft
key.
To enable or disable your own greeting message:
1. Highlight Select and press the Select soft key.
2. Select My Msg. to use your message or Default
to use the default message.
3. Press the Select soft key to save your selection.
Note: Once you have recorded your own message and
then have changed the greeting to the default
message, your message is deleted.
94
95
Settings
Settings
To select a ringer melody:
Many different features of your phone can be
customized to suit your preferences.
1. Select the item you want and press the Select
soft key.
2. Press the Down key.
Sounds (Menu 7-1)
3. Select the melody you want using the Up or
Down key.
You can use this menu to customize various sound
settings, such as the:
4. Press the Save soft key.
• ringer.
Ringer Volume (Menu 7-1-2)
• ringer volume.
• key tone.
In this menu, you can adjust the ringer volume for
the following items:
• tones that sound while using the phone’s
functions.
Voice calls: allows you to adjust the ringer volume
• tone that alerts you every hour on the hour.
for incoming calls.
• tone that the phone sounds when you turn on or
off the phone.
Messages: allows you to adjust ringer volume for
incoming messages.
• voice volume.
Alarm/Scheduler: allows you to adjust ringer
volume for alarm and scheduler.
Ringer (Menu 7-1-1)
To adjust a ringer volume, select the item you want
to adjust the volume level and press the Volume
keys to adjust the volume level. The following
options are available:
This menu allows you to set the unique ringer
melodies for calls, messages, and alarms. You can
select default melodies or ones downloaded from
the wireless web.
No tone: The phone does not sound a ring.
1 Beep: The phone sounds a beep.
•
•
•
Voice calls: allows you to select a ringer for the
incoming calls.
Vibrate: The phone vibrates for incoming calls.
Messages: allows you to select a ringer for
incoming messages.
Level 1 ~ 5: You can adjust the volume level. The
graphic shows the volume level; the more bars, the
louder the volume.
Alarm/Scheduler: allows you to select a ringer
for alarm and scheduler.
Note: Available options may vary, depending on the
item you select.
96
97
Settings
Settings
Fade: When this alert is selected, the phone
sounds an alert when a dropped call occurs during
conversation in response to a signal fade.
Key tone (Menu 7-1-3)
Using this menu, you can set up the keypad tone
that the phone sounds when you press a key.
Folder: When this alert is selected, the phone
sounds an alert when you open or close the phone.
The following options are available:
Tone Type: allows you to select a tone that the
phone sounds when you press a key. Choose one of
To turn on an alert:
1. Select an alert using the Navigation keys and
Man(Heb) Lady(Eng), Raindrop and Beep.
,
press the Select soft key.
Volume: allows you to adjust the volume of the
keypad tone using the Navigation keys or the
Volume keys on the left side of the phone.
2. When a confirming message displays, select On
and press the Select soft key.
Hour alert (Menu 7-1-5)
Function alert (Menu 7-1-4)
You can set your phone to sound an alert every
hour on the hour.
Your phone gives audible alerts (beeps) at a
specified time to inform you that certain things
have happened. The alerts only occur in your
earpiece so the other person on the phone does not
hear them.
1. Enter the period of time using the numeric keys
and press the Down key.
2. Select the alert type, Cuckoo or Voice, using
the Left or Right key.
The following alerts are available:
3. Press the Down key and select On using the Left
Minute Beep: When this alert is selected, the
phone sounds an alert 10 seconds before each
elapsed minute to remind you of the length of the
current call.
or Right key.
If you don’t want to use the hour alert, select
Off
.
Service area: When this alert is selected, the
phone sounds an alert when you exit your service
area or when you return to the service area.
4. Press the Save soft key.
Power On/Off (Menu 7-1-6)
Connect: When this alert is selected, the phone
sounds a connect tone when your call is connected
to the system.
You can select the tone that the phone sounds when
you turn on or off the phone.
Disconnect: When this alert is selected, the phone
sounds a disconnect tone when a call is
disconnected.
To turn off the sound, select Off
.
98
99
Settings
Settings
Turning off: You can select an image to display
when you turn off the phone.
Voice volume (Menu 7-1-7)
This menu enables you to adjust the voice volume
of the earpiece.
Wallpaper: You can select an image to display on
the idle screen.
Press the Navigation keys to adjust the volume. You
can also use the Volume keys on the left side of the
phone. The graphic shows the volume level; the
more bars you see, the louder the volume.
To select an image:
1. Select an item you want and press the Select
soft key.
Note: During a call, you can adjust the volume using
2. Select the image category you want and press
the Volume keys on the left side of the phone.
the Select soft key.
You can select one of the default images, ones
downloaded from the web, or photos you took.
Display (Menu 7-2)
3. Scroll through the images using the Navigation
keys.
The Display feature enables you to:
• change a background image or an image to be
displayed when the phone turns on or off.
4. Press the Select soft key when you find the
image you want.
• set a banner message.
• set the length of time for the backlight.
• set the external clock type.
• turn the service light on or off.
• change the display language.
Banner (Menu 7-2-2)
This menu allows you to set a banner message to
be displayed at the bottom of the display in Standby
mode.
Image box (Menu 7-2-1)
To change the banner:
This menu allows you to change the background
image to be displayed in Standby mode or when the
phone is turned on or off. You can also erase
downloaded or captured images.
1. If necessary, press the
message.
C
key to clear the old
2. Enter a new banner message using the
alphanumeric keys.
The following options are available:
For more information about how to enter
characters, see page 37.
Turning on: You can select an image to display
when you turn on the phone.
3. When you finish entering the message, press
the OK soft key to save it.
100
101
Settings
Settings
Backlight (Menu 7-2-3)
Auto retry (Menu 7-3)
This menu allows you to select the length of time
the backlight remains on.
When this menu is set to On, your phone
automatically redials the number when a connection
fails.
When the phone is open, the backlight remains on
for the specified length of time after the last key is
pressed or you open the phone. Remember that
backlight use drains your battery faster.
Depending on your location, the number of times
your phone automatically redials may be different.
External Clock (Menu 7-2-4)
Answer mode (Menu 7-4)
You can change the type of clock to be displayed on
the external display in Standby mode.
This menu allows you to select how to answer an
incoming call.
Select on of the four options; Digital and Analog 1
The following options are available:
through Analog 3
.
By send key: The phone answers only when you
press the
key.
Service LED (Menu 7-2-5)
By folder open: The phone answers when you
open the phone. If the phone is already open, press
The service light on the front of the phone blinks to
indicate the service status. In this menu, you can
activate or deactivate the feature of the service
lights.
the
key.
By any key: The phone answers when you can
press any key except for the
and the Volume keys.
key, the soft keys,
Language/
(Menu 7-2-6)
You can change the language of the menu display.
Select either or English
.
102
103
Settings
Settings
Change code (Menu 7-5-2)
Security (Menu 7-5)
This feature allows you to change your current lock
code to a new one. The lock code is preset to
“0000” at the factory.
Your phone provides you with various security
options, including a user-programmable lock code
and emergency numbers.
Enter a new, four-digit lock code and enter the code
once again at the prompt.
To access the Security menu, you must enter the
4-digit lock code. It is preset to “0000” at the
factory.
Note: Your phone does not allow viewing of the lock
code for security reasons, so be sure to write
the lock code down or memorize it if you have
changed.
Phone lock (Menu 7-5-1)
In Lock mode, you cannot dial numbers, except for
making an emergency call, or accessing menu
options. The phone can receive incoming calls and
messages, even though the phone is in Lock mode.
Emergency # (Menu 7-5-3)
Your phone provides the option of storing three
emergency numbers. All of these numbers can be
manually dialed at any time, even if your phone is
locked or all outgoing calls are restricted.
The following options are available:
On: You are required to enter the lock code when
you switch on the phone.
IMPORTANT NOTICE!
Off: You are not asked to enter the lock code when
you switch on the phone.
Emergency calling may not be available on all
wireless networks at all times, due to the various
transmission methods, network parameters and
user settings used to complete a call from your
wireless phone. A connection cannot always be
guaranteed.
To place an emergency call in Lock mode, enter a
programmed number and then press the
The phone recognizes standard emergency
numbers, such as 100, or three numbers
key.
programmed in the Emergency # menu (Menu 7-
5-3); see page 105.
DO NOT depend on this phone as a primary method
of dialing 100 or for any other essential or
emergency communications.
To unlock the phone, press one of the soft keys, one
of the volume keys, one of the navigation keys,
Remember to always turn on your phone and check
for the adequate signal strength before placing a
call.
Camera key, VAS key, or
key and enter the 4-
digit lock code. The phone is immediately unlocked.
104
105
Settings
Settings
To store an emergency number:
Clear memory (Menu 7-5-5)
This feature allows you to clear all of the numbers
in your Phone book.
1. Press the Up or Down key to select a location
and press the Select soft key.
You can also erase all of the messages by selecting
2. Press the
C
key to clear the existing number.
Messages
.
3. Enter a number and press the Save soft key to
When a confirmation message appears, select Yes
and press the Select soft key.
save the number.
Note: You can not modify the default numbers such
as 100, 101, 102 and *166.
Reset phone (Menu 7-5-6)
To make an emergency call in Lock mode, simply
enter one of the programmed emergency numbers
This menu allows you to restores the default
settings of all of user-selectable options, or the
phone’s memory.
and press the
key.
The following options are available:
Restriction (Menu 7-5-4)
Function Only: allows you to restores the default
settings of all of user-selectable options.
This feature allows you to restrict the use of your
phone.
All: allows you to restores information except for
the SMS and phonebook.
The following options are available:
Outgoing calls: restricts outgoing calls from your
phone, except emergency calls by standard
emergency numbers, such as 100, 101, 102 and
*166, or three programmed numbers in
When a confirmation message displays, select Yes
and press the Select soft key to confirm. The
phone reboots, turning itself off and then back on,
and returns to Standby mode.
Emergency # (Menu 7-5-3).
Select No to cancel your selection.
Phone Book: restricts access to your Phone book.
You cannot also add a new entry.
When a confirmation message displays, select Yes
to turn it on or No turn it off.
106
107
Settings
Settings
of the Data/Fax options. When you receive a fax
Data/Fax Mode (Menu 7-6)
call, set up the Answer mode in the fax program
on your PC and click on Receive and select one of
the following:
Your phone is capable of sending and receiving
digital data and fax call when connected to a
computing device(laptop, desktop, handheld,
palmtop, etc.) running Windows 95, Windows 98,
Windows NT or later versions. The phone functions
just like a typical modem on your PC, enabling you
to use wireless data involving a wide variety of
Windows software applications.
• Automatic Receive (recommended)
• Manual Receive
Sending a fax or data file
When connected to a computing device, your phone
allows wireless fax and data transmissions. Your
computing device software initiates the call to the
destination phone number. The phone funtions as a
wireless modem to send the fax or data file to the
number designated by your PC software.
To use digital data or fax services with your phone,
you will need to obtain a digital data/fax kit from
your service provider. This kit contains the
necessary cables, software, and user’s guide
required for you to connect and use your phone
with your computing device.
Note: The phone must be on a digital network to
Memory status (Menu 7-7)
receive or send faxes and data.
The following options are available:
This menu allows you to check the number of media
contents you have downloaded from the wireless
web.
Data/Fax off: Your phone dosen’t receive Data
and Fax.
Fax for next call: Your phone receives Fax when
next call is incoming.
Fax until powered off: Your phone receives Fax
until your phone is powered off.
Data for next call: Your phone receives Data when
next call is incoming.
Data until powered off: Your phone receives Data
until your phone is powered off.
Receiving a fax or data
To receive a fax or data, ensure that your phone is
connected to your PC and is powered on. Select one
108
109
VAS
VAS
To
Press
This menu allows you to use a variety of services
supplied by your service provider, such as the:
Return to the
previous page
Dismiss or Cancel soft key.
• WAP browser
Access browser
menus
Menu soft key and select
Browser menu. For details
about each option, see “Using
the browser menus”.
• Voice potal service
• SMS information service
Note: You can quickly access this menu by pressing
the
key in Standby mode.
Exit the browser
key.
Entering text in the browser
Internet Portal (Menu 8-1)
When you are in a text input field, you can use the
following input mode; to change the input mode,
press the abc soft key and select a mode:
Your phone is equipped with a WAP (Wireless
Application Protocol) browser which allows you to
access and navigate the wireless web.
Hebrew:allows you to enter Hebrew letters as you
would in ABC mode.
Selecting the Internet Portal menu launches the
WAP browser. Once you are connected to the
network, the homepage of your service provider.
Sym: allows you to enter symbols or punctuation
marks.
Number: allows you to enter numbers.
Navigating the browser
English: allows you enter English characters by
pressing the key one or more times until the letter
you want appears.
To
Press
Scroll through
browser items
Up and Down keys.
Scroll through
browser items by
one page
Volume keys.
Choose an item
soft key, or press the
Menu soft key and select
Done
.
110
111
VAS
VAS
Send Referrer: allows you to set the browser to
send HTTP referrer information to the web server
each time the browser is launched.
Using the browser menus
When you access the browser menu list, the
follwoing options are available:
Key Press Timeout: allows you to set how long the
phone waits after you have pressed a key in the
text entry mode before moving the cursor to the
Back: goes back to the previous page.
Home: accesses the homepage.
Exit: exits the browser.
right. You can select Fast
,
Medium, or Slow. If
you don’t want to set the timeout, select Off
.
Bookmarks: allows you to make a bookmark for
the current page, or use th bookmark list to quickly
access a page.
Connection Timeout: allows you to set how long the
phone keeps connection to the current web page
when you don’t use the web page. You can select
30secods or 60seconds
.
Go To URL: allows you to enter a URL address of
the web page you want to access.
Security: displays all security-related information,
such as Secure Prompt, Authentication, and Current
Certificate.
Show URL: shows the URL address of the current
page.
About: shows the WAP browser version and
copyright, encryption, and certificate information.
Reload: refreshes the current page using the
updated information.
Settings: provides you with further options.
Homepage: allows you to change the startup
homepage manually.
Downloads: allows you to download image or sound
items on the current web page.
Restart Browser: restarts the browser without
exiting it.
Delete Cookies: deletes all of the cookies and files.
A cookie is a piece of user’s information that is
entered when you use a web site.
View Title Region: allows you to set whether or not
the browser shows the title of a web page.
Scroll Mode: lets you set the scroll mode to either
Block or Smooth, or set the speed for scrolling to
the next screen, to either Fast Medium, or Slow.
,
112
113
VAS
VAS
Changing the application settings
Games & App. (Menu 8-2)
1. Select the Settings icon using the Left or Right
key and press
In this menu, you can use Brew applications. On the
main screen of the menu, there are three default
applications available:
.
2. Select a setting option using the Up or Down key
and press
.
•
•
•
MobileShop: allows you to buy and download
Brew applications from the WAP browser.
The following options are available:
Settings: allows you to change the application
settings and to check the memory status.
•
•
•
•
•
•
Order Apps: allows you to change the order
of the downloaded applications.
Help: gives you help for using applications.
Move Apps: allows you to move an
application to another folder.
Note: You can quickly access this menu by pressing
the Down key in standby mode.
Manage Apps: shows the amount of the
memory used for downloaded applications.
Downloading multimedia files
Main Menu View: allows you to change the
view mode of the main menu screen.
1. Press
selected.
when the MobileShop icon is
Screen Savers: allows you to use one of
screen savers downloaded.
The following options are available:
View Log: shows the records of your browsing
•
•
•
Catalog: allows you to browse and purchase
application.
and downloading.
3. When you have finished, press the
key.
C
or
Search: allows you to search for an
application by entering a keyword.
About Download: provides you with the help
information about using the MobileShop
menu.
Viewing help information
1. Select the Help icon using the Left or Right key
and press
.
2. Press
when the Catalog option is selected.
2. Select a help item using the Up or Down key and
press
You are accessed to the associated web site
preset by your service provider and you can
browse available applications.
.
3. Press the Up or Down key to scroll through the
information.
3. Select the application you want to download and
follow the instructions on the screen.
4. To go back to the main help screen, press
key.
or
C
Downloaded applications will display on the
main screen of the Brew menu.
114
115
VAS
VAS
Ringtone (Menu 8-3)
Saved Animation (Menu 8-4-2)
In this menu, you can review animated images you
have downloaded.
In this menu, you can download ring tones and
melodies from the WAP browser and play the
downloaded contents.
Scroll to the item you want and press the Select
soft key to play it.
Download New Ringtone (Menu 8-3-1)
To remove the item, press the Erase soft key.
Note: You can also access the Image box menu
Selecing this menu loads the WAP page preset by
your service provider so that you can download a
variety of ring tones and melodies.
(Menu 7-2-1) to use or erase the downloaded
animation items.
Saved Ringtones (Menu 8-3-2)
Voice Portal (Menu 8-5)
In this menu, you can review ring tones or melodies
you have downloaded.
This menu allows you to access your service
provider’s voice-activated service. You can get
headline news, get information on movies, the
weather, finance, traffic, or restaurants in many
cities, plus other features; it's similar to the kind of
content that's available on a web portal.
Scroll to the item you want and press the Save soft
key to play it.
To remove the item, press the Erase soft key.
Note: You can also access the Ringer menu (Menu
7-1-1) to use or erase the downloaded ring
tones.
Note: Voice Portal is a network feature. Please
contact your service provider for further details.
SMS INFO (Menu 8-6)
Animation (Menu 8-4)
You can send an SMS query to receive information
you want from the web server. A variety of topics
are avilable, such as news, sports, entertainment,
fun, finance, and astrology.
In this menu, you can download animation images
from the WAP browser and play the downloaded
contents.
Once you select a topic, your phone sends a query
with the code associated with the selected topic,
and the server will send you the requested
information in an SMS message.
Download New Animation (Menu 8-4-1)
Selecing this menu loads the WAP page preset by
your service provider so that you can download a
variety of animation images.
116
117
VAS
VAS
Where Is My Kid (Menu 8-7-3)
GPS (Menu 8-7)
Using this menu, you can use the GPS child locator,
which enables you to track your child via the
Wireless Web.
From the GPS menu, you can access the GPS
feature, which is a handset-based positioning
technology, provided by your service provider.
Selecting this menu loads the preset website and
then you can register the number of the phone you
want to track. For further details, contact your
service provider.
To determine a location, the phone sends and
receives signals to and from a location server on
the network. After taking readings from GPS
satellites and nearby cellular base stations, the
server will perform calculations and tell the phone
the appropriate position information.
Emergency Button (Menu 8-7-4)
When in trouble, you can place an SOS call to the
emergency center by selecting this menu.
Voice Navigation (Menu 8-7-1)
You can use the Voice Navigation service, which
guides you by voice to your destination, from your
current position.
Even if you cannot provide any information on your
location, the emergency center pinpoints your
position and sends the emergency service to you.
When you select this menu, the preset number of
the service dials. Follow the voice prompts from the
network.
Note: This service is available 24 hours a day.
What’s new? (Menu 8-8)
Speed Traps Detector (Menu 8-7-2)
Selecting this menu loads the WAP page preset by
your service provider so that you can get
information about your service provider’s latest
offerings, such as downlods, pricing plans,
entertainment, technical help, and customer
services.
You can use the Speed trap detection service, which
alerts you to fixed speed camera traps or laser
traps, according to your current position.
Selecting this menu dials the preset number of the
service and activates the detection service for you.
The alert will come in as an incoming call. When you
answer the call, the system alerts you to the
presence of the speed trap.
118
119
Camera
Camera
2. Adjust the image by aiming the camera at the
subject.
Using the camera module built into your phone, you
can take photos of people or events while on the
move. You can send photos to other people using a
message or set photos as a Wallpaper image or an
image to be displayed when you turn on or off the
phone.
3. To
Press the
flip the image
vertically
key.
view the mirror image
zoom in or out
key.
You can also record a video by using your phone as
a camcorder.
Left or Right key.
Up or Down Key.
change the image
brightness
Note: You can quickly enter this menu by pressing the
key on the right side of the phone in Standby
mode.
view the image in
actual size
0
key.
CAUTION
:
• Do not take photos of people without their
permission.
use the options
the Option soft key.
See page 122.
• Do not take photos in a place where cameras are not
allowed.
Note: If resolution is set as high, zooming cannot be
• Do not take photos in a place where you may
interfere with another person’s privacy.
used.
4. Press the Capture soft key or
key to take the
photo.
When you are taking multi-shot images, the
camera takes photos successively.
Take photo (Menu 9-1)
The camera produces JPEG photos.
5. Press the Save soft key.
Note: When you take a photo in direct sunlight or in
bright conditions, shadows may appear on the
photo.
To discard the photo and go back to Capture
mode, press the Cancel soft key.
6. Enter the photo name you want.
Taking a photo with the phone open
For details about entering characters, see
page 37.
1. In Standby mode, press and hold the
the right side of the phone.
key on
7. Press the OK soft key.
The image to be captured appears on the
display.
The phone saves the photo(s) in the Photo
album menu (Menu 9-3) and returns to
Capture mode.
120
121
Camera
Camera
Fun frames
Using the options in Capture mode
This option allows you to use a decorated frame
with the photo. Press the Navigation keys to find
the frame format you want to use.
When you press the Option soft key in Capture
mode, the following options are available for the
current shot:
ColorTones
Video Mode
This option allows you to change the color tone or
apply special effects to the photo.
Selecting this option switches the phone to Record
mode. See page 124.
Resolution
Flash
This option allows you to select an image
resolution.
The following options are available:
Off: allows you to turn off the flash.
Note: The High and Medium options are available
This Shot only: allows you to turn on the flash for
the current shot. After you take a photo, the flash
turns off.
only in Single Shot mode.
Taking a photo with the phone closed
Always On: allows you to use the flash when you
take a photo.
1. When the phone is closed, press and hold the
key on the right side of the phone.
Self timer
The image to be captured displays on the
external display.
You can set the camera to take a photo at a
predefined time. You can view the timer icon on the
bottom line of the display. When you press the
key or the Capture soft key, the timer starts
counting down.
2. Adjust the image by aiming the camera module.
To use the options, press the
key until the
option icon is selected. You can change the
settings by pressing the
options are available:
key. The following
Multi shot
This option allows you to take successive action
stills up to seven shots. Select the interval between
•
•
: allows you to flip the image vertically.
: allows you to adjust the brightness of the
image.
shots, Off Short, Normal, or Long. After taking
,
photos, the phone automatically saves them.
Brightness
•
•
:allows you to select the image quality.
: allows you to enlarge the image.
You can adjust the brightness of the image. When
Auto is selected, the phone automatically
determines the setting.
122
123
Camera
Camera
3. Press the
key to take the photo.
6. Press the Save soft key.
The phone saves the photo in the Photo album
menu (Menu 9-3) and returns to Capture
mode.
You can review your recording by pressing the
Review soft key.
7. Enter the video name you want.
For further details about entering characters,
see page 37.
Record video (Menu 9-2)
8. Press the OK soft key.
To record a video:
The phone saves the video in the Video album
menu (Menu 9-4), and returns to Record mode.
1. Accessing the Record video menu turns on the
camera.
Using the options in Record mode
The image to be captured appears on the
display.
When you press the Option soft key in Record
mode, the following options are available:
2. Adjust the image by aiming the camera at the
subject.
Photo Mode
3. To
flip the image vertically
Press the
key.
Selecting this option switches the phone to Capture
mode. See page 120.
Voice REC.
view the mirror image
zoom in or out
key.
This option allows you to record audio with the
video.
Left or Right key.
Up or Down key.
change the brightness
of the image
Self Timer
use the options
the Option soft key.
For details, see
page 125.
You can set the phone to start a video at a
predefined time. You can view the timer icon on the
bottom line of the display. When you press the
Record soft key or the
key, the timer starts
4. Press the Record soft key or the
key to start
counting down.
recording.
Brightness
5. When you have finished, press the Stop soft
You can adjust the brightness of the image. When
Auto is selected, the phone automatically
determines the setting.
key.
Otherwise, the phone will automatically stop
when the recording time expires.
124
125
Camera
Camera
ColorTones
Rename
This option allows you to change the name of the
photo.
This option allows you to change the color tone or
apply a special effect to the video.
Protect
This option allows you to protect the photo so that
other people cannot access the photo without your
lock code.
Photo album (Menu 9-3)
In this menu, you can review the photos you have
taken. By default, your phone displays the last
photo you took on the full screen, Expand mode.
Use the Left and Right keys to scroll through the
photos.
Erase
This option allows you to erase the photo.
Erase All
This option allows you to erase all of the photos
stored in the phone.
To view the photos as small images, press the
Thumbnail soft key. In this mode, you can scroll
through the photos by using the Navigation keys
keys. To go back to Expand mode, press Expand
soft key.
Photo Info
This option shows you information about the
current photo, such as the name, the time and date
it was taken, image size, and image quality.
Using the photo options
Press the Option soft key to use the following
options:
Video album (Menu 9-4)
In this menu, you can play the video files you
recorded. When you access this menu, the still
image of the last video you recorded displays.
Note: The available options are different, depending
on the current view mode, Thumbnail or
Expand mode.
To play a video:
Send MMS
1. Press the Left or Right key to scroll to the video
you want to view.
This option allows you to send the photo to another
person’s phone. For further details about sending
MMS, see page 129
2. To
start
Press the
Play soft key.
right soft key.
key.
Assign
This option allows you to set the photo as your
Wallpaper for the idle screen or an image to be
displayed when you turn on or off the phone.
stop
return to Standby mode
126
127
Camera
Camera
Using the video options
MMS (Menu 9-5)
Press the Option soft key on the Video album
screen to use the following options:
In this menu, you can send a photo to other people
as a part of an MMS message.
Rename
This option allows you to change the name of the
video.
New Photo (Menu 9-5-1)
You can take a new photo and then create and send
an MMS message. Selecting this menu turns on the
camera and switches to Capture mode.
Protect
This option allows you to protect the video so that
other people cannot access the video without your
lock code.
1. After adjusting the image, press the Capture
soft key to take a photo.
Erase
For more information about the options available
in the camera, see page 120.
This option allows you to erase the video.
Erase All
2. Press the Save soft key.
This option allows you to erase all of the videos.
Video Info
3. Enter a photo name and press the OK soft key.
A new message screen containing the taken
photo appears.
This option shows you information about the
current video, such as the name, the time and date
it was recorded, video size, and image quality.
4. When the Send To field highlights, press the
Menu soft key.
Note: You can select a address type, Send To, Cc,
or Bcc, by pressing the Left or Right key.
5. Select Phonebook to retrieve a phone number
or an e-mail address from your Phone book, or
Input to enter one.
6. Choose a number or an address or enter one,
and then press the OK soft key.
7. Press the Down key to move to the Subject
field and press the Edit soft key.
128
129
Camera
Camera
8. Enter a subject and press the OK soft key.
14.If you want to add or remove a slide, move to
the Slide field and press the Menu soft key.
9. Press the Down key to move the Picture field
The following options are available:
and press the Menu soft key.
•
•
•
Add: adds a new slide.
The following options are available:
Erase: erases any added slides.
•
•
•
•
Take Photo: allows you to take a new photo
using the camera.
Duration: allows you to set the length of time
the slide displays.
Album: allows you to select a photo from the
Photo album.
15.When you have finished the MMS message,
press the OK soft key.
Saved Img: allows you to select one of
images you have received by MMS message.
The following options are available:
Erase: remove the image from the slide.
•
•
•
•
Preview: shows the message you created.
MMS Edit: allows you to change the message.
Options: allows you to set message options.
10.Press the Down key to move the Message field
and press the Edit soft key.
11.Enter a message text and press the OK soft key.
Save in Draft: saves the message in the Draft
box.
12.Press the Down key to move to the Sound field
and press the Menu soft key.
16.When you are satisfied, press the OK soft key.
The following options are available:
The phone displays your message.
•
•
•
•
•
Voice Rec: allows you to record a new voice
memo.
17.Press the Send soft key to send it.
Voice Memo: allows you to select one of voice
memos you have recorded.
Album (Menu 9-5-2)
You can create and send an MMS message using
one of photos stored in Photo album. Selecting this
menu opens the Photo album screen.
Melody: allows you to select one of the
default melodies.
Saved Snd: allows you to select one of
sounds you have received by MMS message.
1. Scroll to the photo you want by pressing the Left
or Right key and press the Select soft key.
Erase: remove the sound from the slide.
A new message screen containing the selected
photo appears.
13.Select an option and then record a memo or
select a sound.
2. Follow from step 4 on page 129 to create and
send the message.
130
131
Camera
Health and safety
information
Settings (Menu 9-6)
This menu allows you to change the default settings
of the options for using the camera.
Exposure to radio frequency (RF)
signals
The following options are available:
Resolution: allows you to adjust the resolution of
the image. You can select either High:640*480
Medium:320*240 Full:160*120, or
Low:128*96
,
Your wireless phone is a radio transmitter and
receiver. It is designed and manufactured not to
exceed the emission limits for exposure to radio
frequency (RF) energy set by the Federal
Communications Commission (FCC) of the U.S.
Government. These limits are part of
comprehensive guidelines and establish permitted
levels of RF energy for the general population. The
guidelines are based on the safety standards that
were developed by independent scientific
organizations through periodic and through
evaluation of scientific studies.
,
.
Fun frames: allows you to use a frame with the
photo. Press the Navigation keys to find the frame
format you want to use.
Color tones: allows you to change the color tone
or apply a special effect to the image.
Shutter sound: allows you select the tone that
sounds when you press the Capture soft key or
key.
The standards include a substantial safety margin
designed to assure the safety of all persons,
regardless of age and health.
Quality: allows you to change the image quality.
You can select either Fine Normal, or Economy.
,
The exposure standard for wireless phones employs
a unit of measurement known as Specific
Absorption Rate (SAR). The SAR limit set by the
Memory status (Menu 9-7)
FCC is 1.6W/kg.
*
You can check the amount of the memory being
used and the memory remaining for the Camera
feature.
The display shows the total, used, and free space.
*. In the U.S. and Canada, the SAR limit for mobile phones
used by the public is 1.6 watts/kg (W/kg) averaged over
one gram of tissue. The standard incorporates a substantial
margin of safety to give additional protection for the public
and to account for any variations in measurements.
132
133
Health and safety information
Health and safety information
SAR tests are conducted using standard operating
positions specified by the FCC with the phone
transmitting at its highest certified power level in all
tested frequency bands. Although the SAR is
determined at the highest certified power level, the
actual SAR level of the phone while operating can
be well below the maximum value. This is because
the phone is designed to operate at multiple power
levels so as to use only the power required to reach
the network. In general, the closer you are to a
wireless base station antenna, the lower the power
output of the phone.
For body operation
For body worn operation, this model phone has
been tested and meets the FCC RF exposure
guidelines when used with a Samsung-supplied or
approved accessory designated for this product or
when used with and accessory that contains no
metal and that positions the handset a minimum
from the body.The minimum distance for this model
phone is written in the FCC certification information
from the body.None compliance with the above
conditions may violate FCC RF exposure guidelines.
Before a new model phone is available for sale to
the public, it must be tested and certified to the FCC
that it does not exceed the limit established by the
government-adopted requirement for safe
exposure. The tests are performed in positions and
locations (e.g., at the ear and worn on the body) as
required by the FCC for each model. While there
may be differences between the SAR levels of
various phones and at various positions, they all
meet the government requirement.
For more Information concerning exposure to radio
frequency signals, see the following websites:
Federal Communications Commission (FCC) http://
Cellular Telecommunications Industry Association
U.S.Food and Drug Administration (FDA) http://
The FCC has granted an Equipment Authorization
for this model phone with all reported SAR levels
evaluated as in compliance with the FCC RF
exposure guidelines. SAR information on this model
phone is on file with the FCC and can be found
under the Display Grant section of http://
printed in the label on the phone.
World Health Organization (WHO) http://
FCC certification information for this model phone is
attached separation paper.
134
135
Health and safety information
Health and safety information
fully charged. Li-ion batteries are particularly
affected by temperatures below 0 °C (32 °F).
Precautions when using batteries
• Never use any charger or battery that is damaged
in any way.
• Do not short-circuit the battery. Accidental short-
circuiting can occur when a metallic object (coin,
clip or pen) causes a direct connection between
the + and – terminals of the battery (metal strips
on the battery), for example when you carry a
spare battery in a pocket or bag. Short-circuiting
the terminals may damage the battery or the
object causing the short-circuiting.
• Use the battery only for its intended purpose.
• If you use the phone near the network’s base
station, it uses less power; talk and standby time
are greatly affected by the signal strength on the
cellular network and the parameters set by the
network operator.
• Dispose of used batteries in accordance with local
regulations. Always recycle. Do not dispose of
batteries in a fire.
Battery charging time depends on the remaining
battery charge and the type of battery and charger
used. The battery can be charged and discharged
hundreds of times, but it will gradually wear out.
When the operation time (talk time and standby
time) is noticeably shorter than normal, it is time to
buy a new battery.
Road safety
Your wireless phone gives you the powerful ability
to communicate by voice, almost anywhere,
anytime. But an important responsibility
accompanies the benefits of wireless phones, one
that every user must uphold.
• If left unused, a fully charged battery will
discharge itself over time.
• Use only Samsung-approved batteries and
recharge your battery only with Samsung-
approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave
the battery connected to a charger for more than
a week, since overcharging may shorten its life.
When driving a car, driving is your first
responsibility. When using your wireless phone
behind the wheel of a car, make sure that you are
following the special regulations in a given area or
country.
• Extreme temperatures will affect the charging
capacity of your battery: it may require cooling or
warming first.
Do not leave the battery in hot or cold places, such
as in a car in summer or winter conditions, as you
will reduce the capacity and lifetime of the battery.
Always try to keep the battery at room
temperature. A phone with a hot or cold battery
may temporarily not work, even when the battery is
136
137
Health and safety information
Health and safety information
Persons with pacemakers:
Operating environment
• Should always keep the phone more than 15 cm
(6 inches) from their pacemaker when the phone is
switched on
Remember to follow any special regulations in force
in any area and always switch your phone off
whenever it is forbidden to use it, or when it may
cause interference or danger.
• Should not carry the phone in a breast pocket
• Should use the ear opposite the pacemaker to
minimize potential interference
When connecting the phone or any accessory to
another device, read its user’s guide for detailed
safety instructions. Do not connect incompatible
products.
If you have any reason to suspect that interference
is taking place, switch your phone immediately off.
As with other mobile radio transmitting equipment,
users are advised that for the satisfactory operation
of the equipment and for the safety of personnel, it
is recommended that the equipment should only be
used in the normal operating position (held to your
ear with the antenna pointing over your shoulder).
Hearing aids
Some digital wireless phones may interfere with
some hearing aids. In the event of such
interference, you may wish to consult your hearing
aid manufacturer to discuss alternatives.
Electronic devices
Other medical devices
If you use any other personal medical devices,
consult the manufacturer of your device to
Most modern electronic equipment is shielded from
radio frequency (RF) signals. However, certain
electronic equipment may not be shielded against
the RF signals from your wireless phone. Consult
the manufacturer to discuss alternatives.
determine if it is adequately shielded from external
RF energy. Your physician may be able to assist you
in obtaining this information. Switch your phone off
in health care facilities when any regulations posted
in these areas instruct you to do so. Hospitals or
health care facilities may be using equipment that
could be sensitive to external RF energy.
Pacemakers
Pacemaker manufacturers recommend that a
minimum distance of 15 cm (6 inches) be
maintained between a wireless phone and a
pacemaker to avoid potential interference with the
pacemaker. These recommendations are consistent
with the independent research and
recommendations of Wireless Technology Research.
138
139
Health and safety information
Health and safety information
Vehicles
Emergency calls
RF signals may affect improperly installed or
inadequately shielded electronic systems in motor
vehicles. Check with the manufacturer or its
representative regarding your vehicle.
This phone, like any wireless phone, operates using
radio signals, wireless and landline networks as well
as user-programmed functions, which cannot
guarantee connection in all conditions. Therefore,
you should never rely solely on any wireless phone
for essential communications (medical
You should also consult the manufacturer of any
equipment that has been added to your vehicle.
emergencies, for example).
Remember, to make or receive any calls the phone
must be switched on and in a service area with
adequate signal strength. Emergency calls may not
be possible on all wireless phone networks or when
certain network services and/or phone features are
in use. Check with local service providers.
Posted facilities
Switch your phone off in any facility where posted
notices require you to do so.
Potentially Explosive Environments
To make an emergency call:
Switch your phone off when in any area with a
potentially explosive atmosphere and obey all signs
and instructions. Sparks in such areas could cause
an explosion or fire resulting in bodily injury or even
death.
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present
location (for example, 100 or any other official
emergency number). Emergency numbers vary
by location.
Users are advised to switch off the phone while at a
refuelling point (service station). Users are
reminded of the need to observe restrictions on the
use of radio equipment in fuel depots (fuel storage
and distribution areas), chemical plants or where
blasting operations are in progress.
3. Press
.
If certain features are in use (call barring, for
example), you may first need to deactivate those
features before you can make an emergency call.
Consult this document and your local cellular
service provider.
Areas with a potentially explosive atmosphere are
often but not always clearly marked. They include
below deck on boats, chemical transfer or storage
facilities, vehicles using liquefied petroleum gas
(such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust
or metal powders, and any other area where you
would normally be advised to turn off your vehicle
engine.
When making an emergency call, remember to give
all the necessary information as accurately as
possible. Remember that your phone may be the
only means of communication at the scene of an
accident; do not cut off the call until given
permission to do so.
140
141
Health and safety information
Health and safety information
Other important safety information
Care and maintenance
• Only qualified personnel should service the phone
or install the phone in a vehicle. Faulty
installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Your phone is a product of superior design and
craftsmanship and should be treated with care. The
suggestions below will help you fulfill any warranty
obligations and allow you to enjoy this product for
many years.
• Check regularly that all wireless phone equipment
in your vehicle is mounted and operating
properly.
• Keep the phone and all its parts and accessories
out of the reach of small children’s.
• Do not store or carry flammable liquids, gases or
explosive materials in the same compartment as
the phone, its parts or accessories.
• Keep the phone dry. Precipitation, humidity and
liquids contain minerals that will corrode
electronic circuits.
• For vehicles equipped with an air bag, remember
that an air bag inflates with great force. Do not
place objects, including both installed or portable
wireless equipment in the area over the air bag or
in the air bag deployment area. If wireless
equipment is improperly installed and the air bag
inflates, serious injury could result.
• Do not use the phone with a wet hand. Doing so
may cause an electric shock to you or damage to
the phone.
• Do not use or store the phone in dusty, dirty
areas, as its moving parts may be damaged.
• Do not store the phone in hot areas. High
temperatures can shorten the life of electronic
devices, damage batteries, and warp or melt
certain plastics.
• Switch your phone off before boarding an aircraft.
The use of wireless phones in aircraft may be
dangerous to the operation of the aircraft, and is
illegal.
• Do not store the phone in cold areas. When the
phone warms up to its normal operating
temperature, moisture can form inside the
phone, which may damage the phone’s electronic
circuit boards.
• Failure to observe these instructions may lead to
the suspension or denial of telephone services to
the offender, or legal action, or both.
• Do not drop, knock or shake the phone. Rough
handling can break internal circuit boards.
• Do not use harsh chemicals, cleaning solvents or
strong detergents to clean the phone. Wipe it
with a soft cloth slightly dampened in a mild
soap-and-water solution.
142
143
Health and safety information
Glossary
Air Time - Actual time spent talking on the wireless
phone. Most carriers bill customers based on how
many minutes of airtime they use each month.
• Do not paint the phone. Paint can clog the
device’s moving parts and prevent proper
operation.
• Do not put the phone in or on heating devices,
such as a microwave oven, a stove or a radiator.
The phone may explode when overheated.
Antenna - A device for transmitting or receiving
signals. The size and shape of antennas is
determined, in part, by the frequency of the signal
they receive. Wireless phones and the base station
must have antennas.
• Use only the supplied or an approved
replacement antenna. Unauthorized antennas or
modified accessories may damage the phone and
violate regulations governing radio devices.
Base Station - The fixed radio transmitter/receiver
that maintains communications with mobile radio
telephones within a given area. (Typically called a
cell or cell site)
• If the phone, battery, charger or any accessory is
not working properly, take it to your nearest
qualified service facility. The personnel there will
assist you, and if necessary, arrange for service.
CDMA - (Code Division Multiple Access) A spread-
spectrum approach to digital transmission. With
CDMA, each conversion is digitized and then tagged
with a code. The mobile phone deciphers only a
particular code to pick the right conversation off the
air. The transmitted signal is just above noise level
across the available bandwidth.
Channel - Communications signals transmit along
paths called channels.
Codec Coder/Decorder - Compression &
decompression.
Deactivation - The process of rendering a wireless
phone inactive.
DTMF - (Dual-Tone Multi- Frequency ) You send
DTMF signals when you enter numbers by pressing
the digit keys.
144
145
Glossary
Glossary
EVRC - (Enhanced Variable Rate Codec) EVRC is a
new global standard for compressing and
Standby Time - The amount of time a fully
charged wireless portable or transportable phone
can be on and idle without being in use. (See Talk
Time)
decompressing voice signals. EVRC uses a lower bit
rate (the number of bits sent per second) than
existing CDMA vocoders, while providing significant
improvements in voice quality. This technology
enables your phone to provide superb voice quality
while benefiting from the ability to process more
cellular voice calls using less bandwidth than the
voice codecs in CDMA networks today.
Talk Time - The length of time a person can talk on
a portable or transportable wireless phone without
recharging the battery.
Vocoder - Voice Coder. A device used to convert
speech into digital signals.
Frequency - A measure based on time, as one or
more waves per second, in an electrical or light
wave information signal. A signal’s frequency is
stated in cycles-per-second or Hertz (Hz).
Wireless - Radio-based Systems that allow
transmission of telephone or data signals through
the air without a physical connection, such as a
metal wire (copper) or fiber optic cable.
Hands-Free - A feature that permits a driver to
use a wireless phone without lifting or holding the
handset - an important safety feature for
automobiles, tractors and most other motorized
vehicles.
LCD - (Liquid Crystal Display) Commonly used to
refer to the screen display on the wireless phone.
Prepend - The addition of a prefix, such as an area
code, to a phone number.
RF - Radio Frequency
Roaming - The ability to use a wireless phone to
make and receive calls in places outside of the
home service area.
Service Charge - The amount paid each month to
receive wireless service.
146
147
Index
Index
keys 11
layout 10
I
forwarding 36
from Phonebook 27
incoming 52
Image box 100
A
reset 107
In-call option 34
Installing battery 17
Internet Portal 110
unpacking 9
Phone lock 104
Phonebook
adding entry 57
finding entry 54
group set 62
Photo album 126
Power Save mode 23
Accessories
9
Add
making 25
from Standby mode
59
into an existing entry
59
using a memo 61
using a number 57
using an e-mail
address 60
missed 34 51
,
outgoing 53
recent call 27
silencing 33
three-way 35
waiting 36
K
Key tone 98
Keys
description 11
location 10
Camera 120
Characters, entering 37
Clear memory 107
Countdown 86
R
Adjusting the volume during
a call 32
Air time 53
Alarm 80
Removing the battery 18
Resetting phone 107
Restriction 106
L
Language, select 102
Lock code, change 105
Lock mode 24
Alert
D
connect 98
Data/Fax Mode 108
Dialing
S
Low battery indicator 20
disconnect 98
fade 99
Safety
pause 30
prepend 28
speed 29
folder 99
information 133
precautions 7
Scheduler 77
M
hour alert 99
minute Beep 98
service area 98
Animation 116
Answer mode 103
Auto retry 103
Memo pad 87
Menus
Diplay
Service LED 102
Service light 15
Set time 81
Silent mode 24
SMS info 117
Soft keys 22
Sounds 96
Standby mode 23
Switching on/off phone 20
Icons 13
accessing 44
list 46
Display 100
backlight 102
language 102
layout 13
shortcuts 45
Message
draftbox 67
inbox 64
new message 63
outbox 66
setup 74
DTMF tones, send 35
B
Backlight 15
Banner 101
Battery
,
102
E
Emergency # 105
External clock 102
templates 76
writing 63
MMS 68
charging 19
Installing 17
low battery indicator
20
T
T9 Word, T9 Hebrew 38
Talk mode 23
To do list 84
My phone # 62
F
Find
removing 18
Today 83
N
by entry number 56
by group 56
by name 54
Flash 16
C
Navigating the browser 110
V
Calculator 83
Calendar 77
Calls
VAS 110
P
Phone
Video album 127
Voice Answer 93
Voice mail 73
answering 33
emergency 26
ending 26
G
display 13
Games 88
148
149
Index
Voice memo 91
Voice portal 117
W
Wallpaper 101
What’s new? 119
World time 85
Writing new message 63
150
151
Licensed by QUALCOMM incorporated under one or more
of the following Patents.
U.S Patent No. 4,901,307 5,056,109 5,099,204
5,101,501 5,103,459 5,107,225
5,109,390
152
|