P O R T A B L E
M O B I L E
User Manual
A L L
D I G I T A L
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Intellectual Property
All Intellectual Property, as defined below, owned by or which is otherwise the property of Samsung or its respective suppliers relating to
the SAMSUNG Phone, including but not limited to, accessories, parts, or software relating there to (the “Phone System”), is proprietary to
Samsung and protected under federal laws, state laws, and international treaty provisions. Intellectual Property includes, but is not limited
to, inventions (patentable or unpatentable), patents, trade secrets, copyrights, software, computer programs, and related documentation
and other works of authorship. You may not infringe or otherwise violate the rights secured by the Intellectual Property. Moreover, you
agree that you will not (and will not attempt to) modify, prepare derivative works of, reverse engineer, decompile, disassemble, or
otherwise attempt to create source code from the software. No title to or ownership in the Intellectual Property is transferred to you. All
applicable rights of the Intellectual Property shall remain with SAMSUNG and its suppliers.
Samsung Telecommunications America (STA), LLC
Headquarters:
Customer Care Center:
1000 Klein Rd.
1301 E. Lookout Drive
Richardson, TX 75082
Toll Free Tel:
Plano, TX 75074
1.888.987.HELP (4357)
Internet Address: http://www.samsungusa.com
©
2010 Samsung Telecommunications America, LLC is a registered trademark of Samsung Electronics America, Inc. and its related
entities.
Do you have questions about your Samsung Mobile Phone?
For 24 hour information and assistance, we offer a new FAQ/ARS System (Automated Response System) at:
VZW_SCH-U460_Intensity2_English_UM_DD26_TE_060810_F8
GH68-26943A
Printed in USA
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc., or its
affiliates in the United States and/or other countries.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
®
Openwave is a registered Trademark of Openwave, Inc.
Social Beat, iSkoot, iSkootMobile, associated logos and symbols are trademarks of iSkoot Inc.
Open Source Software
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open
source licenses, please visit:
.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Table of Contents
Function Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Understanding the Home screen . . . . . . . . . . . . . . . . . . . . . . 23
Understanding the Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Menu Outline . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Backup Assistant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Section 5: Entering Text ............................................... 59
Entering Text Using the QWERTY Keyboard . . . . . . . . . . . . . . 59
Entering Text Using the External Keypad . . . . . . . . . . . . . . . . 60
1
Bluetooth Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
Keyguard Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Sounds Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
Browse & Download . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Extras . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Section 8: Web and Social Networking .......................86
Bing Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
2
Phone Info . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138
Open Source Announcement . . . . . . . . . . . . . . . . . . . . . . . . 167
Index ............................................................................ 183
Road Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147
Responsible Listening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148
Availability of Various Features/Ring Tones . . . . . . . . . . . . . 156
Battery Standby and Talk Time . . . . . . . . . . . . . . . . . . . . . . 156
Battery Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156
Care and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158
3
Section 1: Getting Started
This section allows you to quickly start using your phone by
installing and charging the battery, activating your service, and
setting up voicemail.
Note: Instructions in this manual are based on default settings, and may vary
from your phone, depending on the software version on your phone,
and any changes to the phone’s Settings.
Understanding this User Manual
The sections of this manual generally follow the features of your
phone. A robust index for features begins on page 183.
Unless stated otherwise, instructions in this User Manual start with the
phone unlocked, at the Home screen.
All screen images in this manual are simulated. Actual displays may
vary, depending on the software version of your phone and any
changes to the phone’s Settings.
Also included is important safety information that you should
know before using your phone. Most of this information is near
the back of the guide, beginning on page 139.
Special Text
Throughout this manual, you’ll find text that is set apart from the
rest. These are intended to point out important information, share
quick methods for activating features, to define terms, and more.
The definitions for these methods are as follows:
This manual gives navigation instructions according to the
default display settings. If you select other settings, navigation
may be different.
Unless otherwise specified, all instructions in this manual
assume that you are starting from the Home screen, and using
the external keys. To get to the Home screen, you may need to
unlock the phone or keypad. For more information, see Locking
and Unlocking see “Locking and unlocking the phone” on
page 11.
•
Notes: Presents alternative options for the current feature, menu, or
sub-menu.
•
•
Tips: Provides quick or innovative methods, or useful shortcuts.
Important: Points out important information about the current feature
that could affect performance.
•
Warning: Brings to your attention important information to prevent
loss of data or functionality, or even prevent damage to your phone.
4
Text Conventions
Activating your Phone
This manual provides condensed information about how to use
your phone. To make this possible, the following text conventions
are used to represent often-used steps:
If you purchased your phone at a Verizon Wireless store, it is
activated and ready to use. If you received a new phone by mail,
it may need to be activated before you can use it.
To activate your phone, choose from the following:
Highlight
Select
Use Directional Keys to move focus to an item on
the screen.
•
•
•
Visit a Verizon Wireless store.
Contact Verizon Wireless customer support.
Use Directional Keys to highlight an item on the
screen, then press the Center Select Key
OK Key . The Center Select Key or OK Key
function changes according to the type of item
highlighted.
or
Displaying Your Telephone Number
My Number displays the ten-digit telephone number assigned to
your phone.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Phone Info
My Number
➔
Arrows are used to represent the “highlight, then
select” steps in longer, or repetitive, procedures.
➔
➔
➔
.
For example: “From the Home screen, press the
Center Select Key to select Message
Message TXT Message
➔
New
➔
.
Getting Started
5
Battery Cover
Battery
Your phone is powered by a rechargeable, standard Li-Ion
battery. A USB cable and Charging Head are included with the
phone, for charging the battery.
The battery is under a removable cover on the back of the phone.
Removing the battery cover
ᮣ
Press down on the top of the cover and on the arrow at the
bottom of the cover, while sliding the cover off in the
direction of the arrow.
Note: The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
Warning!: Use only Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Using
other accessories may invalidate your warranty and may cause
damage.
Battery Indicator
The battery icon in the upper-right corner of the display shows
battery power level, with four bars
indicating a full
charge. Two to three minutes before the battery becomes too low
to operate, the empty battery icon will flash and a tone will
sound. If you continue to operate the phone without charging, the
phone will power off.
Installing the battery cover
ᮣ
Align the cover and slide it into place, making sure it snaps
securely at all four corners.
6
Installing the Battery
Removing the Battery
1. Remove the battery cover. For more information, see
“Removing the battery cover” on page 6.
1. Remove the battery cover. For more information, see
“Removing the battery cover” on page 6.
2. Insert the top end of the battery into the phone housing,
aligning the gold contacts on the battery with the gold
contacts in the phone. Push down on the bottom of the
battery down until it snaps into place.
2. Lift the battery up by the slot provided.
3. Lift the battery up and out of the phone.
3. Install the battery cover.
Getting Started
7
Charging the Battery
2. Pull the USB Power/Accessory Port cover out and turn to
expose the port.
Your phone comes with a USB cable and charging head to rapidly
charge your phone from any 120/220 VAC outlet.
Note: The battery comes partially charged. You must fully charge the battery
before using your phone for the first time. A fully discharged battery
requires up to 4 hours of charge time.
After the first charge, you can use the phone while charging.
Incorrect
1. Connect the USB cable to the charging head.
Correct
Charging Head
3. Insert the USB cable into the port.
4. Plug the charging head into a standard AC power outlet.
USB Cable
5. When charging is complete, the indicator on the charging
head turns green. Unplug the charging head from the
power outlet and remove the USB cable from the phone.
Incorrect
Correct
8
Non-Supported Batteries
Turning Your Phone On and Off
ᮣ
Press and hold the
End/Power key to turn the
Samsung handsets do not support the use of non-approved
batteries.
phone on or off.
While powering on, the phone connects with the home
network, then displays the Home screen and active alerts.
Important!: Using a non-supported battery may damage to your phone.
When using a non-supported battery you will hear a series of
beeps and see a warning message:
“
NON-SUPPORTED BATTERY. SEE USER MANUAL
”
If you receive this warning, battery charging has been disabled.
Samsung charging accessories, such as the charging head and
cigarette lighter adapter, will only charge Samsung-approved
batteries.
Default Home screen
End/Power key
Note: When using a non-supported battery, the phone can only be used for
the duration of the life of the battery and cannot be recharged.
Note: Your phone’s internal antenna is located along the bottom back of the
phone. Do not block the antenna; doing so may affect call quality or
cause the phone to operate at a higher power level than is necessary.
Getting Started
9
Set-up Wizard
Easy Set-Up
Set preferences for four basic categories, to start using your
phone quickly.
Use the Easy Set-up settings to quickly set common settings.
Easy Set-up is available for Sound Settings and Display Settings.
1. From the Home screen, press the Center Select Key
Easy Set-up for Sounds
to select MENU
➔
Settings & Tools
➔
Set-up Wizard.
1. From the Home screen, press the Center Select Key
to select MENU
Settings Easy Set-up
2. Follow the screen prompts to choose settings for Call
Sounds Keypad Volume Text Message Alert Multimedia
Message Alert, and Voicemail Message Alert
Easy Set-up for Displays
➔
Settings & Tools
➔
Sounds
2. Follow the prompts to set preferences for these settings:
➔
.
• Call Sounds: Choose how your phone alerts you to incoming calls.
• Display Themes: Select a theme for your phone’s displays.
• Menu Layout: Choose a layout for the Main menu.
• Clock Format: Select a format for the Home screen clock.
3. While setting preferences:
,
,
,
.
•
•
•
Press SET to make a selection and go to the next setting.
Press Preview or Play for an example of the highlighted selection.
Press Skip to move to the next setting without making a selection.
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Display
Settings Easy Set-up
2. Follow the screen prompts to choose settings for Display
Backlight Keypad Backlight Wallpaper Display Themes
Menu Layout Dial Fonts Personal Banner Clock Format, and
Home Screen Font Color
➔
➔
➔
.
,
,
,
,
,
,
,
.
10
Locking the phone
Locking and Unlocking
1. From the Home screen, press the Center Select Key
Your phone offers two lock functions, locking the phone, or
locking the keypad.
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
➔
.
Note: Unless stated otherwise, instructions in this User Manual start with the
phone unlocked, at the Home screen.
2. At the “ENTER CODE” prompt, enter the Lock Code. The
default lock code is the last four digits of your phone
number.
Locking and unlocking the phone
Locking the phone prevents
unauthorized access to
3. Select Lock Phone Now
.
information on the phone, but
allows dialing with the Dialer.
Locking and unlocking the
phone requires the Lock Code.
Tip: The default lock code is the last four digits of your phone number, or you
can set a custom lock code at Phone Settings
➔
Security
➔
Edit Codes.
Unlocking the phone
ᮣ
Press the Right Soft Key
Code.
Unlock and enter the Lock
Lock Screen with Eco Wallpaper
Tip: You may choose to have the phone lock automatically when you power it
on. For more information, see “Phone Lock Setting” on page 130.
Getting Started
11
Locking and unlocking the keypad
TTY Mode
By default, the external keypad locks automatically when the
backlight goes out, or you can lock it manually.
TTY device to the phone’s headset jack. Before you can use your
phone with a TTY device, you’ll need to enable TTY Mode. For
more information about TTY settings, see “TTY Mode” on
page 134.
Note: Use Keyguard Settings to customize keypad locking. For more
information, see “Keyguard Setting” on page 115.
Roaming
Locking the keypad manually
When you travel outside your home network’s coverage area,
your phone can roam to acquire service on other compatible
digital networks. when Roaming is active, the Roaming icon
appears in the Annunciator line of the display.
ᮣ
Press and hold
until “PHONE KEYPAD IS NOW
LOCKED” appears. “KEYPAD LOCKED” displays on the lock
screen until you unlock the keypad.
Unlocking the keypad
During roaming, some services may not be available. Depending
on your coverage area and service plan, extra charges may apply
when making or receiving call.
ᮣ
Press any key to wake the display, then press the Right
Soft Key
OK
Unlock, followed by the Center Select Key
.
Note: Contact Verizon Wireless for more information about your coverage
– or –
area and service plan.
ᮣ
Press and hold
until the Home screen appears.
12
Voicemail
Memory Card
All unanswered calls to your phone are sent to voicemail, even if
your phone is turned off, so you’ll want to set up your voicemail
and personal greeting as soon as you activate your phone.
Your phone supports optional, removable microSD™ memory
cards of up to 16GB capacity (not included). You can store music,
pictures, and other files on a memory card.
Setting up Voicemail
1. Press and hold
Note: You can only store music files that you own on a memory card.
.
Installing a Memory Card
– or –
1. Pull the memory card cover out and turn it to expose the
card slot.
Press
➔
➔
, then press
.
2. Follow the automated instructions to set up your new
password and record a greeting.
Incorrect
Checking Voicemail
1. Press and hold
Correct
.
– or –
Press
➔
➔
, then press
.
2. Enter your password, then press
.
3. Follow the recorded prompts to listen to messages and
manage your voicemail.
Tip: You can also access voicemail by dialing your phone number from any
2. Push the memory card into the slot until it locks into place.
touch-tone phone.
Getting Started
13
Removing a Memory Card
1. Pull the memory card cover out and turn it to expose the
memory card in the card slot.
2. Press on the memory card to release the lock, then remove
the card.
Formatting
Formatting erases all content from the memory card and
prepares it for use with your phone.
Formatting a Memory Card using Your Phone
1. From the Home screen, press the Center Select Key
to select MENU
Card Memory
2. At the prompt “Format Card”, use the
➔
Settings & Tools
➔
Memory
➔
➔
Format Card
.
Directional Key
to highlight Yes, then press the Center Select Key
OK.
Formatting a Memory Card using Your PC
For best playback of songs stored on a microSD™ memory card,
use the PC file system FAT32. Consult your PC and/or memory
card reader documentation for information about formatting
memory cards.
14
Section 2: Understanding Your Phone
This section outlines key features of your phone, including keys,
displays, and icons.
•
Advanced Voice Commands, using Nuance Voice Recognition
technology, for no-training voice-activated dialing and other features
Speakerphone
•
•
•
Features of Your Phone
microSD Memory Card slot (up to 16GB capacity, card not included)
•
•
•
•
High Speed Data (1x Technology)
®
Bluetooth Wireless Technology. For more information, see
Full slide-out QWERTY keyboard
®
“Bluetooth Menu” on page 112.
Global Positioning (GPS) Technology with VZ Navigator
Personal Organization Tools
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch screen may damage the
tempered glass surface and void the warranty. For more
–
–
–
–
–
–
Calculator
Calendar
Alarm Clock
Stop Watch
World Clock
Notepad
information, refer to “Standard Limited Warranty” on page 160.
•
Messaging Services
–
–
–
–
–
–
Standard and Enhanced Text Messaging
Picture Messaging
Email
Voice Messaging
Mobile Instant Messenger (IM)
Chat
•
•
Full slide-out QWERTY keyboard
1.3 Megapixel Camera with IrLED light sensor
Understanding Your Phone
15
4. Left Soft Key: Press to select a menu, item or command
Front View
displayed at the left of the bottom line of the display.
1
5. Send Key: Press to place or receive a call. From the Home
screen, press to access the All Calls log.
6. Speakerphone Key: Press to enable/disable speakerphone.
7. Voicemail Key: Press and hold to access voicemail.
8. Lock Key: Press and hold to lock or unlock the keys.
9. Microphone: Allows callers to hear you clearly.
2
14
13
3
4
5
6
7
12
10. Vibrate Mode Key: Press and hold to toggle Vibrate mode.
11
11. Clear Key: Press to delete characters from the display.
Press to return to the previous menu or screen.
10
9
12. End/Power Key: Press to end a call. Press and hold to
power the phone On or Off. Press to send an incoming call
directly to voicemail. When navigating, press to return to
the Home screen.
8
Features
1. Earpiece: Allows you to hear callers and prompts.
13. Right Soft Key: Press to select a menu, item or command
2. LCD display: Displays information to operate your phone.
displayed at the right of the bottom line of the display.
3. Directional Key: Press Up, Down, Left or Right to scroll
through menus or lists. From the Home screen, each
direction also acts as a shortcut to an application.
14. Center Select Key: Press to select the command displayed
at the center of the bottom line of the display.
16
Features
Side Views
1. Strap attachment: Attach a strap (not included).
7
6
2. Volume Key: From the Home screen, press to adjust Master
Volume, or press and hold to activate Sounds Off/Normal
mode. Press to adjust voice volume during calls, adjust
audio volume, or mute an incoming call ringtone.
1
2
3
3. USB Power/Accessory Port: Plug in a USB cable for
charging or to sync music and files.
4. Camera Key: From the Home screen, press and hold to
activate the camera. While in Camera mode, press to take
a picture.
5
4
5. Memory Card Slot: Insert an optional microSD memory card
(not included) to add additional memory and storage
capacity.
6. Voice Commands Key: From the Home screen, press to
activate Voice Commands.
7. 2.5mm Headset Jack: Plug in an optional headset for safe,
convenient conversations or music playback.
Understanding Your Phone
17
3. Favorites/Function Key: When entering text, press to toggle
access to the orange symbols on the QWERTY keyboard.
From the Home screen, press to access Favorites.
Open View
2
1
4. Shift/Message Key: When entering text, press to toggle
between mixed, upper and lower case for alphabet
characters. From the Home screen, or when highlighting a
contact or Favorite, press to open a new Text message.
5. Smiley Key: When combined with the Function Key,
10
9
3
4
displays Smileys for insertion into text.
6. Space/Social Networks Key: When entering text, press to
insert a space. From the Home screen, press for quick
access to social networking sites.
5
6
7
8
7. Directional Keys: Press Up, Down, Left or Right to scroll
Features
through menus, or to move the insertion point.
1. Left Soft Key: Press to select a menu, item or command
8. OK Key: Press to select an item, or the command at the
displayed at the left of the bottom line of the display.
center of the bottom line of the display.
2. Right Soft Key: Press to select a menu, item or command
9. Enter Key: Press to move the insertion point to the next line
displayed at the right of the bottom line of the display.
in a message.
10. Clear Key: When entering text, press to delete characters.
Press to return to the previous menu or screen.
18
Back View
Navigation Keys
Soft Keys
Soft key functions are defined by what appears above them, in
the bottom line of the display. There are three soft keys: the Left
Soft Key, the Right Soft Key, and the Center Select Key or OK Key.
4
3
1
2
Your phone has two options for soft keys.
Tip: When using the QWERTY keyboard, you can use either set of soft keys.
Features
1. Mirror: Use to position the camera when taking self-
portraits with the Camera.
2. Camera Lens: Used to take pictures.
Left Right
OK
3. Speaker: Music, ringtones and sounds play through the
Left
Right
speaker. Listen to callers when using Speakerphone.
Center Select
4. IrED: Used when taking pictures with the Camera.
QWERTY Soft Keys
External Soft Keys
Understanding Your Phone
19
Left Soft Key
Directional Keys
Some functions of the Left Soft Key are:
Press the Directional Key Up Down, Left or Right to browse
,
menus and lists, or to launch applications from the Home screen.
•
From the Home screen, press the Left Soft Key Message to open the
Messaging menu.
Up
Up
•
When the Left Soft Key function is Edit, press to edit the item or field.
Right Soft Key
Right
Right
Left
Left
Some functions of the Right Soft Key are:
•
From the Home screen, press the Right Soft Key Contacts to open your
Contacts list.
Down
Down
QWERTY Directional Keys
External Directional Keys
•
When the Right Soft Key function is Options, press to choose options
for the current item.
Directional Key Shortcuts
From the Home screen, press a Directional Key Up Down, Left or
Right to launch its corresponding application.
,
Center Select Key
Some functions of the Center Select Key are:
Mobile Web
•
From the Home screen, press the Center Select Key MENU to open the
Menu.
•
When the Center Select Key function is OK, press to select the
highlighted option.
My Verizon
My Shortcuts
1. New TXT Msg
2. New Picture Msg
3. Bluetooth On/Off
Default Directional Key Shortcuts
Tip: Customize Directional Key shortcuts to launch your favorite applications.
For more information, see “Set Shortcuts” on page 125.
20
Camera Key
Function Keys
End/Power Key
Use the
Camera Key for Camera functions:
Camera Key to
•
From the Home screen, press and hold the
activate the camera.
While in camera mode, press the Camera Key to take a photo.
Use the
End/Power Key to end calls, to turn the phone on
or off, and to return to a previous menu.
•
For example:
Voice Commands Key
•
•
•
Press and hold the End/Power Key to turn your phone on or off.
Press the End/Power Key to disconnect a call.
Press the End/Power Key to return to the home screen from any
menu, or to cancel the last input.
From the Home screen, press the
to activate Voice Commands.
Voice Commands Key
Volume Key
•
Press the End/Power Key to send an incoming call to Voicemail.
Use the
Volume Key to adjust volume:
Send Key
•
From the Home screen, press the Volume Key to adjust Master
Volume.
Use the
Send Key to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
From the Home screen, press and hold the Volume Key down to
activate Sounds Off/Normal mode.
For example:
•
•
•
During calls, press the Volume Key to adjust voice volume.
During music playback, press the Volume Key to adjust audio volume.
Press the Volume Key to mute the ringtone of an incoming call.
•
•
•
Press the Send Key to answer calls.
Enter a number and press the Send Key to make a call.
Press the Send Key from the Home screen to display a list of all calls
to and from your phone.
Speakerphone Key
•
•
Press and hold the Send Key from the Home screen to call the most
recently dialed, received, or missed number.
Press the
Speakerphone Key to switch between the
earpiece and the speakerphone, before or during a call.
While on a call, press the Send Key to answer a new incoming call.
Press the Send Key again to switch back to the first call.
Understanding Your Phone
21
Lock Key
Social Networks Key
From the Home screen, press and hold the
lock or unlock the keypad.
Lock Key to
Use the
Social Networks Key on the QWERTY keyboard to
launch Social Beat, to quickly access your favorite social
networks. For more information, see “Social Beat” on page 92.
Vibrate Mode Key
Favorites Key
Use the
Vibrate Mode Key to control Vibrate Only mode:
Use the
Favorites Key on the QWERTY keyboard to quickly
•
From the Home screen, press and hold the Vibrate Mode Key to set
access up to 10 contacts or groups. For more information, see
your phone to Vibrate Only mode.
“Favorites” on page 52.
•
Press and hold the Vibrate Mode Key to return to the previous sound
profile.
New Message Key
Use the
New Message Key on the QWERTY keyboard to
quickly open a new message:
•
•
•
•
•
From the Home screen, press the New Message Key to create a new
Text Message.
From Recent Calls, press the New Message Key to create a new Text
Message addressed to the highlighted phone number.
From Contacts, press the New Message Key to create a new Text
Message addressed to the highlighted contact’s default number.
From My Pictures, press the New Message Key to create a new
Picture Message with the highlighted picture as an attachment.
From My Sounds, press the New Message Key to create a new Picture
or Voice message with the highlighted sound as an attachment.
22
2. Event Status Line: Presents icons indicating active alerts,
Status Icons” on page 26.
Understanding the Home screen
The Home screen is the starting point for using your phone.
1
3
3. ERI Banner: Indicates current network, if ERI Banner is
enabled. See “ERI banner” on page 119.
Customizing the Home screen
You can customize the Home screen to suit your preferences.
Changing the Wallpaper
Select a background image for the Lock Screen and Home
screen, from pre-loaded images, or your own pictures. For more
information, see “Wallpaper” on page 120.
2
Create a personal banner, or enable a network status banner, to
on page 118.
Note: Unless stated otherwise, instructions in this User Manual start with the phone
unlocked, at the Home screen.
Features
Setting the Clock Format
1. Annunciator Line: Presents icons to show network status,
battery power, and connection details. For a list of icons,
see “Annunciator Line Icons” on page 24.
Set the format of the clock. For more information, see “Clock
Format” on page 124.
Understanding Your Phone
23
Choosing Font Colors
Roaming Status: The phone is roaming outside the
home service area. Consult Verizon Wireless for
roaming plans and rates.
Choose font colors for the Personal Banner, ERI Banner, and
Clock. For more information, see “Home Screen Font Color” on
page 125.
Voice Call: A voice call is in progress.
Setting the Display Theme
Data Call: A data connection is active, and data is
being transmitted and received.
Display themes offer coordinated looks for all your phone’s
screens, including the Home screen. For more information, see
“Display Themes” on page 121.
DataDormant:Adataconnectionisactive,butnodata
Home screen Icons
is being transmitted or received.
Annunciator Line Icons
NoService:Nocoverageisavailable.Youcannot send
or receive calls or messages.
These icons appear in the Annunciator Line on the Home screen.
Voice Listening: Voice Commands is active and
Digital Signal Strength: The number of bars show
signal strength. More bars indicate stronger signal.
listening for your command.
D
Voice Readout: The Voice Commands Prompts Mode
is set to Readout, or Readout + Alerts. For more
information, see “Voice Commands Settings” on
page 127.
1X CDMA Signal Strength: The number of bars show
signal strength. More bars indicate stronger signal.
AirplaneMode:Disablesallcommunicationfunctions
of your phone. You cannot send or receive calls or
messages, butotherfeaturesareavailable. Formore
information, see “Airplane Mode” on page 125.
E911Only:GPSlocationinformationisavailabletothe
network only while on Emergency calls. For more
information, see “Location” on page 127.
24
Location On: GPS location information is available to
thenetwork. Formoreinformationaboutthissetting,
see “Location” on page 127.
Music Only: The phone is in Music Only mode, and all
wireless communications are disabled. For more
information, see “Music Only Mode” on page 94.
SSL: Data is encrypted by Secure Socket Layer
encryption, for increased privacy.
BatteryLevel:Batterychargeindicator.Thenumberof
bars show available battery power, with more bars
indicating more charge.
Voice Privacy: The Voice Privacy setting is active, to
see “Voice Privacy” on page 135
TTY: TTY Mode is active. For more information, see
“TTY Mode” on page 134.
Keypad Lock: The external keypad is locked. Follow
on-screen prompts to unlock the keypad. For more
Bluetooth On: Bluetooth service is On. For more
information, see “Turning Bluetooth On or Off” on
page 113.
Bluetooth Connected: The phone is paired with
another Bluetooth device. For more information, see
“Adding a New Device” on page 114.
Bluetooth Active: The phone is exchanging
information with another Bluetooth device.
Understanding Your Phone
25
Event Status Icons
Understanding the Menu
These icons appear in the Event Status line on the Home screen.
The Menu is the starting point for launching applications and
features. To access the Menu:
ᮣ
From the Home screen, press the Center Select Key
to select MENU
All Sounds Off: Master Volume is set to All Sounds Off.
No sounds are played for calls, messages or alerts.
.
Alarm Only: Master Volume is set to Alarm Only. The
only sounds played will be for alarms.
Customizing the Menu
Setting a Display Theme
Vibrate Only: Master Volume is set to Vibrate Only. The
phone will vibrate for calls and alerts.
Display themes offer
coordinated looks for all your
phone’s screens, including the
Menu. For more information,
see “Display Themes” on
page 121.
Unread Msg: You have a new, unread text message.
Voicemail: You have new voicemail.
Choosing a Menu Layout
Missed Calls: You have missed calls.
Choose from Tab, List, or Grid
menu layouts. For more
information, see “Menu
Layout” on page 121.
Calendar Event: You have an active calendar event.
Speakerphone: The phone is in speakerphone mode.
Alarm On: You have an alarm set.
Menu with default
Pond Display Theme
Replacing Menu Items
Choose your favorite applications and features to display in the
Menu. For more information, see “Replace Menu Items (List
Menu Layout only)” on page 122.
26
Position Menu Items
MediaCenter:LaunchtheMediaCentermenu,forthe
multimedia features of your phone. For more
Arrange the order of Menu items, according to your preference.
For more information, see “Position Menu Items (List Menu
Mobile Email: Launch the Mobile Email feature, to
send and receive Email from your phone. For more
Menu Fonts
Choose the font and size for Menu screens. For more information,
®
see “Menu Fonts” on page 123.
VZ Navigator : Launch VZ Navigator, for location-
based directions and searches. For more
Menu Items
These items appear on the Menu by default.
Bing Search: Launches Bing Search. For more
Social Beat: Launch Social Beat, for easy access to
your favorite social networks. For more information,
see “Social Beat” on page 92.
Messaging:OpentheMessagingmenu, for accessto
messaging features. For more information, see
“Messaging” on page 64.
Settings & Tools: Configure your phone to your
preferences, and access built-in productivity tools.
For more information, see “Settings” on page 110.
RecentCalls:OpentheRecentCallslog,toviewrecent
received, missed and dialed calls. For more
Contacts:OpentheContactsmenu,toenter,viewand
manage your daily contacts. For more information,
see “Understanding Your Contacts” on page 42.
Understanding Your Phone
27
Menu Number Accelerators
Menu Outline
Each menu item has a number assigned to it, and you can access
menu items using these menu numbers.
The following list shows the menu structure and indicates the
accelerator number assigned to each option.
For example, launch My Pictures using standard navigation
:
1:
2:
Search
1. From the Home screen, press the Center Select Key
to select MENU
.
Messaging
2. The
Media Center menu is highlighted. Press the
1: New Message
1: TXT Message
2: Picture Message
3: Voice Message
2: Messages
3: Drafts
4: Voicemail
5: Email
6: Social Beat
7: Mobile IM
8: Social Networks
9: Chat
Center Select Key
OK to select it.
3. Press the
Directional Key Down to highlight
3. Pictures and press the Center Select Key
OK to
select it.
4. Press the
Directional Key Down to highlight
2. My Pictures and press the Center Select Key
select it.
OK to
Launch My Pictures using menu number accelerators
1. From the Home screen, press the Center Select Key
to select MENU
2. Press Media Center
Pictures
:
.
➔
Pictures
➔
My
3:
Recent Calls
1: Missed
.
2: Received
28
1: Get New Ringtones
1: Get New Applications
3: My Music
4: My Sounds
1: Record New
5: Sync Music
3: Dialed
4: All
5: View Timers
4:
Contacts
1: New Contact
2: Contact List
3: Backup Assistant
4: Groups
3: Pictures
1: Get New Pictures
1: Get New Applications
2: My Pictures
1: Business
3: Take Picture
2: Colleague
4: Online Album
3: Family
4: Friends
5: Speed Dials
6: In Case of Emergency
7: My Name Card
4: Games
1: Get New Applications
5: Mobile Web
6: Browse & Download
1: Get New Applications
7: Extras
5:
Media Center
1: Search
1: Get New Applications
6:
7:
Mobile Email
VZ Navigator
2: Music & Tones
1: Get New Ringtones
1: Get New Applications
1: Get Ringback Tones
2: My Ringtones
Understanding Your Phone
29
4: Bluetooth Menu
1: Add New Device
5: Keyguard Settings
1: Auto Lock
2: Unlock Options
6: Sounds Settings
1: Easy Set-up
8:
9:
Social Beat
Settings & Tools
1: My Verizon
2: Master Volume
3: Tools
1: Voice Commands
2: Calculator
1: Normal
2: Call Sounds
1: Call Ringtone
1: Get New Ringtones
1: Get New Applications
2: Call Vibrate
2: Tip
3: Eco
4: Converter
1: Temperature
2: Length
3: Caller ID Readout
3: Alert Sounds
1: TXT Message
1: Tone
3: Weight
4: Area
5: Volume
1: Get New Ringtones
1: Get New Applications
2: Vibrate
6: Currency
3: Calendar
4: Alarm Clock
5: Stop Watch
6: World Clock
7: Notepad
3: Reminder
2: Multimedia Message
1: Tone
1: Get New Ringtones
1: Get New Applications
2: Vibrate
8: USB Mass Storage
30
3: Reminder
3: Voicemail
1: Tone
1: Get New Ringtones
1: Get New Applications
2: Vibrate
3: Reminder
4: Emergency Tone
5: Missed Call
1: Personal Banner
2: ERI Banner
3: Backlight
1: Display
1: Duration
2: Brightness
2: Keypad
4: Wallpaper
1: Home Screen
6: Device Connect
7: Battery Charge Alert
4: Keypad Sounds
5: Keypad Volume
6: Digit Dial Readout
7: Service Alerts
1: ERI
2: Minute Beep
3: Call Connect
4: Software Update
8: Power On/Off
1: Power On
2: Lock Screen
5: Display Themes
6: Main Menu Settings
1: Menu Layout
2: Replace Menu Items (List Menu Layout)
3: Position Menu Items (List Menu Layout)
4: Reset Menu Settings
1: Menu Layout
2: Menu Items (List Menu Layout)
3: Item Positions (List Menu Layout)
4: All
7: Fonts
2: Power Off
1: Dial Fonts
1: Style
2: Size
7: Display Settings
1: Easy Set-up
2: Menu Fonts
2: Banner
Understanding Your Phone
31
1: Style
2: Size
1: Adapt Voice
5: Prompts
3: Messaging Font Size
8: Clock Format
9: Home Screen Font Color
1: Personal Banner
2: ERI Banner
1: Mode
2: Audio Playback
3: Timeout
6: Key Settings
7: About
3: Clock
4: Language
5: QWERTY Action
6: Location
7: Current Country
8: Security
8: Phone Settings
1: Airplane Mode
2: Set Shortcuts
1: Set My Shortcuts
1: Shortcut 1
1: Edit Codes
1: Phone Only
2: Shortcut 2
2: Calls & Services
2: Restrictions
3: Shortcut 3
4: Shortcut 4
1: Location Setting
2: Calls
1: Incoming Calls
2: Outgoing Calls
3: Messages
2: Set Directional Keys
1: UP Directional Key
2: LEFT Directional Key
3: DOWN Directional Key
3: Voice Command Settings
1: TXT Msg Readout
2: Confirm Choices
3: Sensitivity
1: Incoming Messages
2: Outgoing Messages
3: Phone Lock Setting
4: Lock Phone Now
4: Adapt Voice
32
5: Restore Phone
9: System Select
0: NAM Select
4: My Music
5: My Sounds
6: My Contacts
7: Move All To Card
3: Card Memory
1: Card Memory Usage
2: My Pictures
1: NAM Select
2: Auto NAM Select
*: Quick Search
9: Call Settings
1: Answer Options
2: Auto Retry
3: My Ringtones
4: My Music
5: My Sounds
3: TTY Mode
6: My Contacts
7: Move All To Phone
8: Format Card
4: One Touch Dial
5: Voice Privacy
6: Data Settings
1: Select Port
*: Phone Info
2: Port Speed
1: My Number
2: SW/HW Version
3: Icon Glossary
4: Software Update
1: Status
7: DTMF Tones
8: Assisted Dialing
0: Memory
1: Save Options
2: Check New
1: Pictures
#: Set-up Wizard
2: Sounds
2: Phone Memory
1: Phone Memory Usage
2: My Pictures
3: My Ringtones
Understanding Your Phone
33
Section 3: Call Functions
This section describes how to make, answer, or end a call. It also
includes information about the Recent Calls log and Voice
Commands.
Sending Calls to Voicemail
Use one of these methods to ignoring an incoming call and send
it directly to voicemail:
Making a Call
Your phone offers multiple ways to make calls:
•
•
Press the Right Soft Key
To ignore the call and send a text message to the caller, press the
Center Select Key TXT. Choose a Quick Text phrase for your
response, then press the Center Select Key SEND
Ignore to send the call to voicemail.
•
Enter the phone or speed dial number on the keypad, then press
Send
.
.
•
•
•
Call a contact from Contacts, or from Favorites.
Return a call, or call a recent caller via Recent Calls.
Voice dial using Voice Commands.
Tip: To silence the ringer on an incoming call, press the Left Soft Key
Quiet, or press the down
Volume key.
Answering Call-Waiting Calls
Answering a Call
Your phone offers multiple ways to answer incoming calls:
When you receive a call while on a call:
•
Press
new call.
Send to place the first call on hold and answer the
•
•
With the phone open or closed, press
Send.
Slide the phone open to answer the call automatically, with the
Speakerphone enabled.
•
Press
Send again to return to the first call.
•
With the slide open, press
Send.
Note: These are default behaviors. To choose other options for answering
calls, see “Answer Options” on page 133.
34
Call In-Progress Options
Recent Calls
You can access menus and features while in a call:
When you place, miss, or receive a call, a record of the call is
saved in Recent Calls. These types of calls are:
•
Press the Right Soft Key
Options for these options.
•
•
•
•
•
Missed: Calls you did not answer.
Received: Calls you answered.
Dialed: Calls made from your phone.
All: Missed, received, and outgoing calls.
View Timers: Lengths of time for Last Call, All Calls, Received Calls,
Dialed Calls, Roaming Calls, Transmit Data, Received Data, Total Data,
Last Reset, Lifetime Calls, and Lifetime Data Counter.
• New TXT Msg: Create a new text message.
• Contact List: Open Contacts to view your contacts.
• Recent Calls: Display incoming, missed and outgoing calls.
• Bluetooth Menu: Display the Bluetooth menu.
• Main Menu: Display the Main menu.
• Notepad: Open the Notepad.
• Whisper Mode: Increase the microphone to maximum volume
level, to improve the other caller’s ability to hear your voice clearly,
when you are speaking softly, or are in a noisy environment.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Recent Calls.
• Voice Privacy: Turn On or Off advanced voice encryption.
– or –
•
To control whether the other caller can hear you, press the Left Soft
From the Home screen, press
Send.
Key
Mute/Unmute.
2. Highlight a call type, then press the Center Select Key
OK to view call records:
•
•
•
Missed: Calls you did not answer.
Received: Answered calls.
Dialed: Outgoing calls.
• All: All missed, received, and dialed calls.
• View Timers: Statistics about calls.
Call Functions
35
3. Calls display by date, time and contact or phone number. If
the phone number is saved as a contact, the call record
includes icons to indicate the type of number.
Creating or Updating Contacts Using Recent Calls
1. From the Home screen, press the Center Select Key
to select MENU
➔
Recent Calls.
– or –
4. Highlight a call, then choose from these options:
From the Home screen, press
2. Find a call from All Calls Missed Calls
Dialed Calls
3. Highlight a call record, then press the Left Soft Key
Options Save to Contacts
4. Use the Directional Key to highlight Add New Contact
OK
Send
.
•
•
•
Press the Left Soft Key
Press the Center Select Key
Press the Right Soft Key
Message to send a reply message.
OPEN to view details.
,
,
Received Calls, or
Options for these options:
.
–
Save to Contacts: Save the caller’s phone number as a new contact,
or to update an existing contact.
➔
.
–
–
–
–
Erase: Delete the highlighted call record.
Lock/Unlock: Protect the record to prevent erasure, or remove lock.
Erase All: Delete all call records of this type.
View Timers: Display statistic about calls of this type
.
Making Calls Using Recent Calls
1. From the Home screen, press the Center Select Key
5. Continue entering contact information. For more
information, see “Editing a Contact” on page 46.
to select MENU
➔
Recent Calls.
– or –
From the Home screen, press
2. Find a call from All Calls Missed Calls
Dialed Calls
3. Highlight a call record, then press
Send
.
,
,
Received Calls, or
.
Send
.
36
Deleting Recent Calls Records
3. At the Erase All? prompt, highlight Yes, then press the
Center Select Key
OK.
1. From the Home screen, press the Center Select Key
to select Menu
➔
Recent Calls.
Voice Commands
– or –
Voice Commands is advanced speech recognition software that
recognizes your spoken commands to dial phone numbers,
create messages, and launch phone features such as Contacts,
Calendar and My Music.
From the Home screen, press
2. Find a call from All Calls Missed Calls
Dialed Calls
3. Highlight a call record, then press the Left Soft Key
Options Erase
4. At the Erase entry? prompt, use the
Send
.
,
,
Received Calls, or
.
To use Voice Commands, speak naturally into your phone, at a
distance of 3-12 inches. There is no need to “train” Voice
Commands, it is designed to recognize natural speech.
➔
.
ᮣ
From the Home screen, press the
Voice
Directional Key
Commands key.
to highlight Yes, then press the Center Select Key
OK.
Deleting All Recent Calls Records
Note: At each step, Voice Commands displays a list of available commands.
1. From the Home screen, press the Center Select Key
If Voice Commands does not recognize your command, it will prompt
you to confirm.
to select Menu
➔
Recent Calls.
– or –
Tip: Press the Left Soft Key
Info at any time to display helpful tips for
From the Home screen, press
2. Display All Calls Missed Calls
Calls, then press the Left Soft Key
All
Send
Received Calls, or Dialed
Options Erase
.
using Voice Commands.
,
,
➔
.
Call Functions
37
The following is a list of functions that you can perform with
Voice Commands:
•
“< A Contact Name>”, to call the default telephone number for a
contact. Or, say “Call”, followed by the type of number, Mobile 1,
Home, or Business.
•
Call <Name or #>: Place a call to a saved contact, to a telephone
number, or to voicemail.
•
•
•
“<Telephone Number>” to dial phone number.
“Voicemail” to access voicemail.
•
Send <Msg Type>: Create a text, picture, or voice message to a
saved contact, or to a telephone number.
“Last Number” to redial the last number.
•
•
•
•
•
•
•
•
Go To <Menu>: Open any application installed on your device.
Check <Item>: View details about your phone’s status.
Contacts <Name>: Open a contact record from Contacts.
Search: Search for items in your phone’s memory.
Redial: Call the last number you dialed.
Play <Playlist>: Open My Music, to play a playlist, or all songs.
My Verizon: Open the My Verizon application.
Help: Launch a helpful tutorial about using Voice Commands.
3. Follow the prompts to confirm your selection and place the
call.
Send <Msg Type>
Create a new message by speaking the type of message and the
recipient(s).
1. From the Home screen, press the
Voice
Commands key. The audio prompt “Please say a
command.”sounds and the Voice Commands display.
Call <Name or #>
2. Say “Send”, followed by “Text”. “Picture” or “Voice”.
Place a call by speaking a contact name or telephone number.
1. From the Home screen, press the
Voice
3. At the prompt, say the contact name, telephone number, or
Commands key. The audio prompt “Please say a
contact group.
command.”sounds and the Voice Commands display.
4. The new message opens, with the To: field populated with
your selection(s). Continue creating the message. For more
information, see “Messaging” on page 64.
2. Say “Call”, followed by:
38
Go To <Menu>
• Time: Displays and announces the current time.
• Signal Strength: Displays and announces the current 1x signal
strength level.
Access a menu item by speaking the menu’s name.
1. From the Home screen, press the
Voice
• Battery Level: Displays and announces the current battery level.
• Volume: Displays and announces the current volume level.
• Balance: Calls the service number for account balance information.
• Minutes: Calls the service number for minute balance information.
• Payment: Calls the service number for payment information.
• My Number: Displays and announces your phone number.
Commands key. The audio prompt “Please say a
command.”sounds and the Voice Commands display.
2. Say “Go to”, followed by the name of a menu item, for
example, “Contacts”, “Recent Calls“, “Messaging“, “Media
Center“, “Calendar”, “Settings & Tools“, “Mobile Web“, or
“My Music“. The item opens.
Search
Check <Item>
Search for information on your phone by saying the name of the
searched item.
Access device information by speaking the command.
1. From the Home screen, press the
Voice
1. From the Home screen, press the
Voice
Commands key. The audio prompt “Please say a
Commands key. The audio prompt “Please say a
command.”sounds and the Voice Commands display.
command.”sounds and the Voice Commands display.
2. Say the name of the item to be search, and follow the
2. Say “Check”, followed by a command:
Voice Commands prompts.
• Status: Displays and announces all phone status indicators.
• Voicemail: Displays and announces the number of new voicemail
messages.
• Messages: Displays and announces the number of new Text,
Picture and Voice messages.
• Missed Calls: Displays the missed call log.
Call Functions
39
Contacts <Name>
Play <Playlist Name>
Access a contact record by speaking the name of the contact.
Launch My Music and start playback of a saved playlist.
1. From the Home screen, press the
Voice
1. From the Home screen, press the
Voice
Commands key. The audio prompt “Please say a
Commands key. The audio prompt “Please say a
command.”sounds and the Voice Commands display.
command.”sounds and the Voice Commands display.
2. Say “Contacts”, followed by a command:
2. Say “Play”, followed by:
• Call: Calls the contact’s default number.
• Readout: Reads the contact’s information.
• Create New: Create a new contact.
• Modify: Open a contact record for modification.
• Erase: Delete a contact.
•
•
“
Play All” to play all tracks stored in your Music Library.
“<Playlist Name>” to play songs in a saved playlist.
My Verizon
Check your Verizon Wireless account status by voice command.
Note: This features launches the browser to your account page and requires
Redial
a data plan and is subject to Verizon Wireless data coverage.
Place a call to the last number you dialed.
1. From the Home screen, press the
Voice
1. From the Home screen, press the
Voice
Commands key. The audio prompt “Please say a
Commands key. The audio prompt “Please say a
command.”sounds and the Voice Commands display.
command.”sounds and the Voice Commands display.
2. Say “My Verizon”.
2. Say “Redial”.
40
Help
• Adapt Voice: Train Voice Commands to recognize your voice.
• Prompts: Select settings for voice command prompts.
Display helpful information for using Voice Commands.
–
–
–
Mode: Select the level of audio guidance you prefer, from Prompts,
Readout+Alerts, Readout, or Tones Only.
1. From the Home screen, press the
Voice
Commands key. The audio prompt “Please say a
Audio Playback: Control whether audio is played through the
speakerphone or earpiece.
command.”sounds and the Voice Commands display.
Timeout: Control how long the Voice Commands system listens for a
2. Say “Help”.
command from you. Choose 5 seconds or 10 seconds
.
Voice Commands Settings
• Key Settings: Select the method for launching Voice Commands.
Configure the Voice Commands feature of your phone.
–
–
Choose Voice Key Only to launch with the Voice Commands key.
Choose Voice Key/Ear Mic to launch with the Voice Commands key,
OR with headset controls when you attach an optional headset.
1. From the Home screen, select MENU
Tools Phone Settings ➔Voice Command Settings
2. Select a setting for customization:
➔
Settings &
➔
.
• About: View information about Voice Commands.
• TXT Msg Readout: Choose On to have the phone reads the text in
a TXT message, or Off for no readout.
• Confirm Choices: Choose whether the phone prompts you with a
list of potential matches to your voice command. Select Automatic
,
Always Confirm, or Never Confirm
.
• Sensitivity: Select a setting:
–
–
–
Less Sensitive if the phone frequently recognizes a command even if
you said nothing.
More Sensitive if the phone frequently does not recognize names,
numbers, or commands.
Automatic for the default sensitivity level.
Call Functions
41
Section 4: Understanding Your Contacts
This section allows you to manage your daily contacts by saving
information in Contacts.
Accessing Contacts
To access Contacts List for quick access to most functions:
Contacts provides access to powerful features such as Groups,
creating and sending vCards, and viewing the phone number
assigned to your phone by Verizon Wireless.
ᮣ
From the Home screen, using the external keypad, press
the Right Soft Key
– or –
Contacts
Using the QWERTY Keyboard
keyboard:
From the Home screen, using the QWERTY keyboard, press
the Right Soft Key Contacts
.
•
•
Open the phone to access the QWERTY keyboard in landscape mode.
page 59.
From the Home screen, press the Center Select Key
to select MENU Contacts
ᮣ
➔
.
Enter contact information using the QWERTY keyboard. For more
information, see “Entering Text Using the QWERTY Keyboard” on
page 59.
Note: Instructions for creating, editing and managing Contacts use the
QWERTY keyboard, unless otherwise stated in the procedure.
42
6. When you’re finished entering information, press the OK
Adding a New Contact
Key
SAVE to save the contact.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Contacts Fields
These icons represent all available fields for Contacts.
Mobile 1: Enter the contact’s Primary mobile telephone
number.
1. From the Home screen, press the Right Soft Key
Contacts
.
2. Press the Right Soft Key
Options
➔
New Contact.
Home: Enter the contact’s Home telephone number.
3. Use the QWERTY
keyboard to enter a name
for the contact in the
Name: field.
Business: Enter the contact’s Work telephone number.
Personal Email: Enter the contact’s Personal Email
address.
4. Use the
Keys to highlight Mobile 1
Mobile 2 Home Business
Directional
Group:Enterthecontact’sGroupassignment.PresstheLeft
,
SoftKey
SettochooseaGroupfromtheGroupslist.
,
,
Picture: Choose a Picture ID for the contact.
or Fax and enter a
Ringtone : Choose a Ringtone for the contact.
telephone number.
5. Continue using the
Mobile 2: Enter the Secondary mobile telephone number.
IMScreenName:EntertheInstantMessagingscreenname.
Fax: Enter the contact’s Fax telephone number.
Directional Keys to move to fields to add additional
information, if desired.
Understanding Your Contacts
43
Adding a New Contact from the Keypad
Business Email: Enter a Work Email address.
Home Address Street: Enter the Home street address.
Home Address City: Enter the Home city.
Enter a telephone number with the external keypad, then save it.
Note: This procedure uses the external phone keypad and command keys.
1. From the Home screen, use the external keypad to enter
Home Address State: Enter the Home state.
Home Address Zip Code: Enter the Home Zip Code.
Home Address Country: Enter the Home country.
Work Address Street: Enter the Work street address.
Work Address City: Enter the Work city.
the telephone number.
2. Press the Left Soft Key
3. Use the Directional Key to highlight Mobile 1
Home
OK
Save
➔
Add New Contact
.
,
Mobile
2,
,
Business or Fax, then press the Center Select Key
.
4. Enter a name for the contact in the Name: field.
Work Address State: Enter the Work state.
5. Continue adding information to fields, or press the Center
Work Address Zip Code: Enter the Work Zip Code.
Work Address Country: Enter the Work country.
Select Key
SAVE to save the contact.
Company: Enter the contact’s place of employment.
Title: Enter the contact’s job title.
Birthday: Enter the contact’s date of birth.
Notes: Enter Notes about the contact.
44
Adding a New Contact from Recent Calls
Erasing Contacts
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
the phone and slide it open to access the QWERTY keyboard.
Save a telephone number from a recent call record as a contact.
1. From the Home screen, press the Right Soft Key
1. From the Home screen, press
2. Use the Directional Keys to highlight a call record.
3. Press the Right Soft Key Options Save to
Send
.
Contacts
.
2. Press the Right Soft Key
Options
➔
Manage
Contacts
➔
Erase
.
➔
Contacts
➔
Add New Contact
Directional Keys to highlight Mobile 1
Business or Fax, then press the OK Key
5. Enter a name for the contact in the Name: field.
.
3. Use the
Directional Keys to highlight a contact, then
press the OK Key
press the Right Soft Key
contacts.
MARK to mark it for erasure, or
4. Use the
,
Mobile
OK
Mark All to mark all
2,
Home
,
.
4. Press the Left Soft Key
Done. At the prompt,
6. Continue adding information to fields, or press the OK Key
highlight Yes to confirm the erasure, then press the OK Key
SAVE to save the contact.
OK to erase the contact(s).
Understanding Your Contacts
45
Editing a Contact from the External Keypad
Editing a Contact
Make changes to an existing contact.
Enter a telephone number with the external keypad, then save it
to an existing contact.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: This procedure uses the external phone keypad and command keys.
1. From the Home screen, press the Right Soft Key
1. From the Home screen, use the external keypad to enter
Contacts
Directional Keys to highlight an existing
3. Use the Directional Keys to move to fields to modify
.
the telephone number.
2. Use the
2. Press the Left Soft Key
3. Use the Directional Key to highlight a contact, then
press the Center Select Key OK
4. Use the Directional Key to highlight Mobile 1
Home Business or Fax, then press the Center Select Key
OK
Save
➔
Update Existing.
.
or add information for the contact. For a list of available
,
Mobile
fields, see “Contacts Fields” on page 43.
2,
,
4. When you’re finished, press the OK Key
SAVE to save
.
the contact.
5. Continue editing fields, or press the Center Select Key
SAVE to save the contact.
46
Editing a Contact from Recent Calls
Managing Contacts
Save a telephone number from a call record to a contact.
Use Manage Contacts to perform actions, such as erasing,
locking, or unlocking, on multiple contacts at one time.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
2. Use the Directional Keys to highlight a call record.
to select
1. From the Home screen, press the Right Soft Key
Contacts
.
2. Press the Left Soft Key
Options
➔
Manage Contacts.
For more information about using Recent Calls logs, see
“Recent Calls” on page 35.
3. Choose an option:
• Erase: Mark multiple contact(s) for deletion.
3. Press the Right Soft Key
Options
➔
Save to
• Lock: Mark multiple contact(s) to lock. Locked contacts cannot be
Contacts
➔
Update Existing
Directional Keys to highlight a contact, then
OK
.
deleted.
4. Use the
• Unlock: Mark multiple contact(s) to unlock.
press the OK Key
.
• Copy to Card: Mark contact(s) to copy to an optional installed
memory card.
5. Use the
Home
Directional Keys to highlight Mobile 1
,
Mobile
OK
SAVE to
4. Use the
Directional Keys to highlight contacts, then
2
,
,
Business or Fax, then press the OK Key
.
press the OK Key
to MARK each contact, or press the
6. Continue editing fields, or press the OK Key
Right Soft Key
Mark All to mark all contacts.
save the contact.
5. Press the Left Soft Key
Done to perform the
selected option on all marked contacts.
Understanding Your Contacts
47
Adding Pauses or Waits
Finding a Contact
Calls to automated systems can require you to enter numbers to
navigate menus, or to enter a password or account number.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
1. From the Home screen, press the Right Soft Key
Contacts. The Contacts List displays, with the cursor in the
Go To field.
the phone and slide it open to access the QWERTY keyboard.
2. In the Go To field,
enter the first
few characters
of the Contact
name to see
matching
2. Create a new contact entry, or edit an existing contact. For
more information, see “Adding a New Contact” on
page 43, or “Editing a Contact” on page 46.
3. Enter the phone number up to the pause or wait, then
press the Right Soft Key
Options:
entries.
• Add 2-Sec Pause: Stops the dialing sequence for two seconds,
then automatically dials the remaining digits. A “p” appears in the
field to indicate the pause.
3. Use the
Directional Keys to highlight a contact, then proceed with
one of these options:
• Add Wait: Stops the dialing sequence, waiting for further input from
you. A “w” appears in the field to indicate the wait.
4. When you’re finished, press the OK Key
SAVE
.
•
•
•
•
Press
Send to call the contact.
Press the Center Select
Press the Left Soft Key
Press the Right Soft Key
VIEW to open the contact entry.
Edit to edit the contact entry.
Options for Contacts options.
Note: Multiple pauses extend the length of a pause, and each pause counts
as a digit toward the 48-digit maximum. For example, 2 consecutive
Add Pauses create a total pause of four seconds, and count as 2 digits.
48
Finding a Contact using Quick Search
Groups
You can assign Contact entries to categories, called Groups, to
make searching your contacts faster, or to quickly send
messages to group members.
Note: The Quick Search setting must be enabled to perform this procedure.
For more information, see “Quick Search” on page 132.
Using the QWERTY Keyboard
Note: By default, new Contacts have the No Group assignment.
ᮣ
Open the phone, then use the QWERTY keyboard to enter
the first few letters of the contact name.
Viewing Groups
Using the External Keypad
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
ᮣ
From the Home screen, use the external keypad to press
the first few number keys to correspond to the letters of
the contact name, then press the Directional Key Up
For example, to search for “Sally” you would press:
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts Groups
to select
.
➔
➔
.
2. Available groups appear in the display. These groups are
available by default:
• Business
• Colleague
• Family
S
A
L
Then, press the
Contacts.
Directional Key Up to search
• Friends
3. Use the
press the OK Key
members.
Directional Keys to highlight a group, then
VIEW to display a list of group
Understanding Your Contacts
49
Changing a Contact’s Group Assignment
Creating a New Group
Edit a contact’s Group field to change the group assignment.
In addition to the default groups, you can create additional
groups, to a maximum of 25 groups.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts Contact List
2. Use the Directional Keys to highlight a contact, then
press the Left Soft Key Edit
3. Use the Directional Keys to highlight the Group field,
then press the Left Soft Key Set
4. Use the Directional Keys to highlight groups, then
press the OK Key MARK to mark or un-mark groups
for assignment.
to select
1. From the Home screen, press the OK Key
MENU Contacts Groups
to select
➔
➔
.
➔
➔
.
.
3. At the NEW GROUP screen, enter a name of up to 25
characters for the new group in the “Enter Name:” field. For
more information, see “Entering Text” on page 59.
.
4. When finished, press the OK Key
SAVE.
5. When you finish marking groups, press the Left Soft Key
Done to save the changes.
50
Sending a Message to Group Members
4. The new message opens, with the cursor positioned in the
Text field. Continue creating the message, as desired.
For more information, see“Messaging” on page 64.
Use Send Message in the Group feature to send a message to as
many as 10 members of a group at once.
Speed Dials
Speed Dials are 1-, 2- or 3-digit shortcuts you assign to contacts,
Note: Messaging availability varies when roaming outside the Verizon
Wireless Network.
to allow you to quickly call the contact.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: Some Speed Dials are reserved by default, and cannot be assigned:
Speed Dial 1 is reserved for Voicemail. Speed Dial 211 is reserved for
information about health and human services, 311 for non-
emergency municipal services; 411 for directory assistance; 611 for
customer service access; and 911 for emergencies.
1. From the Home screen, press the OK Key
MENU Contacts Groups
Directional Keys to highlight a group, then
VIEW to display it.
Options, then choose a
to select
➔
➔
.
2. Use the
Assigning a Speed Dial
press the OK Key
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
3. Press the Right Soft Key
the phone and slide it open to access the QWERTY keyboard.
message option:
1. From the Home screen, press the OK Key
MENU Contacts Speed Dials
2. Use the Directional Keys to highlight a speed dial, or
enter the speed dial digits into the Go To field, then press
the OK Key SET
to select
• New TXT Msg: Creates a new text message, with all group
members entered as recipients.
➔
➔
.
• New Picture Msg: Creates a new picture message, with all group
members entered as recipients.
• New Voice Msg: Creates a new Voice message, with all group
members entered as recipients.
.
Understanding Your Contacts
51
3. At the SET SPEED DIAL screen, use the
Directional
Favorites
Keys to highlight a contact, or enter the first few characters
Favorites are up to 10 contacts or groups that you assign. You
can use Favorites to view messages sent to and from favorite
contacts, and quickly call or send a message to favorites.
into the Go To field.
4. At the Set Speed dial to Contact? prompt, highlight Yes, then
To access Favorites:
press the OK Key
OK.
ᮣ
Press the
– or –
Favorites Key on the QWERTY keyboard.
Removing a Speed Dial
Select Favorites from the Contacts List
.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts Speed Dials
2. Use the Directional Keys to highlight a speed dial, or
enter the speed dial digits into the Go To field.
3. Press the Right Soft Key Remove
4. At the Remove speed dial? prompt, highlight Yes, then
press the OK Key OK
to select
➔
➔
.
.
.
52
Assigning Favorites
Removing Favorites
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the
the QWERTY keyboard. The first time you launch Favorites
read the description, then press the OK Key ASSIGN
2. On the ADD FAVORITES screen, choose an option, then
press the OK Key OK
Favorites Key on
1. From the Home screen, press the
Favorites Key on
,
the QWERTY keyboard.
.
2. To remove a single Favorite, use the
Directional Keys to
highlight the Favorite, then press the Right Soft Key
Options and select Remove. At the prompt, select
Yes to confirm the removal.
:
• Add Contacts: To assign individual contacts as Favorites.
• Add Groups: To assign Groups as Favorites.
3. To remove all Favorites, press the Right Soft Key
Options and select Remove All. At the prompt, select
Yes to confirm the removals.
3. Use the
Directional Keys to highlight up to 10
contacts or groups, then press the OK Key
mark them as Favorites.
Mark to
4. Press the Left Soft Key
Done to assign the
Favorites.
Understanding Your Contacts
53
Using Favorites
In Case of Emergency
Use In Case of Emergency to set up to 3 emergency contacts, plus
enter personal information that may be helpful to others using
your phone in an emergency.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the
Favorites Key on
Tip: Emergency contacts display in red in the Contacts List.
the QWERTY keyboard.
2. To send a Text Message to a Favorite, use the
Assigning Emergency Contacts
Directional Keys to highlight a Favorite, then press the
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
Shift/Message Key
.
the phone and slide it open to access the QWERTY keyboard.
3. To view messages to and from the Favorite, use the
1. From the Home screen, press the OK Key
MENU Contacts In Case of Emergency
2. Use the Directional Keys to highlight Contact 1
Contact 2, or Contact 3, then press the OK Key
to select
Directional Keys to highlight the Favorite, then press
➔
➔
.
the Left Soft Key
Messages
Directional Keys to highlight
Send
.
,
4. To call a Favorite, use the
ADD
Directional Keys
OK
.
the Favorite, then press
.
3. In the ADD CONTACT screen, use the
5. To view a Favorite’s contact information, use the
to highlight an option and press the OK Key
:
Directional Keys to highlight the Favorite, then press
• From Contacts: Choose an existing contact from Contacts List,
then press the OK Key OK
the OK Key
Favorite.
VIEW, or just press the number of the
.
• New Contact: Enter a new contact, then press the OK Key
OK
.
54
Re-assigning or Unassigning Emergency Contacts
Entering Personal Information
Use Personal Information to enter up to 3 pieces of information,
such as known illnesses or allergies, that might be helpful to
others using your phone in an emergency.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts In Case of Emergency
2. Use the Directional Keys to highlight a contact.
to select
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
➔
➔
.
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts In Case of Emergency
2. Use the Directional Keys to highlight Personal Info
then press the OK Key VIEW
3. Use the Directional Keys to highlight Note 1
or Note 3, then press the OK Key ADD
4. Enter your personal information into the note, then press
the OK Key SAVE to save the note.
to select
3. Press the Right Soft Key
Options, then choose an
➔
➔
.
option:
,
• Re-assign: Choose another contact from Contacts List, or create a
new contact for this assignment.
.
,
Note 2,
• Unassign: Remove the contact from this emergency contact.
.
Understanding Your Contacts
55
Sending My Name Card (vCard) by Message
My Name Card
My Name Card is your personal contact entry in Contacts, which
you can send to recipients as a virtual business card (vCard)
attached to a message, or via Bluetooth.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts My Name Card
2. Press the Left Soft Key Options, then highlight an
option and press the OK Key OK
to select
Note: Navigation for these procedures may differ when an optional memory
➔
➔
.
card is installed.
Creating My Name Card
:
• Send via TXT Message: Creates a new text message, with My
Name Card as an attachment.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
• Send via Picture Message: Creates a new picture message, with
1. From the Home screen, press the OK Key
MENU Contacts My Name Card
EDIT to display the EDIT MY NAME
to select
My Name Card as an attachment.
➔
➔
.
• Send via Voice Message: Creates a new voice message, with My
2. Press the OK Key
CARD screen.
OK Key
3. Use the
and Sending Text Messages” on page 65, “Creating and
Sending Picture Messages” on page 66, or “Creating and
Sending Voice Messages” on page 68.
and use the QWERTY keyboard to enter information. For
more information, see “Adding a New Contact” on
page 43, or “Editing a Contact” on page 46.
4. When finished, press the OK Key
SAVE to save the
Name Card.
56
Sending My Name Card (vCard) by Bluetooth
Sending Name Cards (vCards) by Bluetooth
You can send your contact information, as My Name Card, to
Bluetooth devices that support vCards.
You can send individual contacts, or your entire contact list, to
Bluetooth devices that support vCards.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
Important!: Not all Bluetooth devices will accept a name card, and not all
devices support transfers of multiple name cards. Check your
target device’s documentation.
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts My Name Card
2. Press the Left Soft Key Options, then select Send
to select
➔
➔
.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the OK Key
MENU Contacts Contact List
2. Use the Directional Keys to highlight a contact, then
press the Right Soft Key Options Send Name
Card
3. At the SEND MY NAME CARD screen, use the
Directional Keys to highlight Bluetooth, then press
the OK Key OK
4. At the SEND VIA BLUETOOTH screen, mark contact(s):
to select
via Bluetooth and press the OK Key
OK:
➔
➔
.
3. At the CHOOSE DEVICE screen, use the
Directional
Keys to highlight an option, then press the OK Key
OK
➔
:
.
• Add New Device: Searches for a new Bluetooth device for pairing,
to send My Name Card.
• <Device Name>: Sends My Name Card to a previously-paired
.
4. Continue with the Bluetooth transfer. For more information
about adding devices and sending via Bluetooth, see
“Bluetooth Menu” on page 112.
•
Press the
the OK Key
Directional Keys to highlight contacts, then press
Mark to mark them for sending.
•
Press the Right Soft Key
Mark All to mark all contacts.
Understanding Your Contacts
57
•
When finished, press the Left Soft Key
5. At the CHOOSE DEVICE screen, use the
Keys to highlight an option, then press the OK Key
OK
Done
.
Backup Assistant
Directional
Backup Assistant is a wireless service that saves a copy of your
Contacts List to a secure web site. If your phone is lost, stolen or
damaged, Backup Assistant can restore your saved contacts to a
new phone, wirelessly. Schedule daily backups to save your
information manually or automatically. Log in to your web
account for full access to your contacts for viewing, printing
adding, deleting, and editing.
:
• Add New Device: Searches for a new Bluetooth device for pairing,
to send My Name Card.
• <Device Name>: Sends My Name Card to a previously-paired
Visit http://www.verizonwireless.com/backupassistant, or contact
Verizon Wireless for more information.
6. Continue with the Bluetooth transfer. For more information
about adding devices and sending via Bluetooth, see
“Bluetooth Menu” on page 112.
Note: Standard TXT messaging rates apply. Backup Assistant is free for My
Verizon subscribers.
Note: A vCard contains all contact information except Group, Ringtone, and
ᮣ
From the Home screen, press the Center Select Key
to select MENU Contacts Backup Assistant
then follow the on-screen directions.
Emergency (ICE) contact status.
➔
➔
,
58
Section 5: Entering Text
Your phone provides convenient ways to enter words, letters,
punctuation, and numbers when you need to enter text.
Entering Text
Enter text by pressing the appropriate keys on the QWERTY
keyboard.
This section describes text input modes and entering characters
or symbols, using the built-in QWERTY keyboard or the keypad.
Use these keys to enter special characters:
Backspace: Press to delete the previous character.
Press and hold to delete the previous word.
Entering Text Using the QWERTY Keyboard
The built-in QWERTY keyboard provides quick and easy text
input, similar to a computer keyboard.
Enter: Press to move the insertion point to the next
Accessing the QWERTY Keyboard
line, or to the next field.
ᮣ
To access the keyboard, rotate the phone and slide it open,
as shown.
Shift: Press to switch between Abc (initial case), ABC
(upper case), and abc (lower case) modes. Press
twice quickly to lock ABC mode, then press again to
unlock.
Space: Press to insert a space.
Entering Numbers
Enter numbers by pressing the number keys on the top row of
the QWERTY keyboard.
Entering Text
59
Entering Symbols
Changing the Text Entry Mode
Enter symbols by pressing the Function key to access the orange
symbols at the top of the keys.
While entering text, you can change the text entry mode to your
preference.
Function: Press to turn on Sym mode. Press twice
quickly to lock the keyboard in Sym mode, to enter
multiple symbols.
Tip: You can set a default Text Entry Mode. For more information, see
“Messaging Settings” on page 78.
1. While entering text, press the Left Soft Key
Mode
Entry
.
Entering Smileys
Enter Smileys by pressing the Function key, then the Smileys key.
2. Select a text entry mode:
• T9 Word (external keypad only)
Function: Press
Key to display the first of 3 pages SMILEYS pages.
Use the Directional Key to scroll through the
symbols on a SMILEYS page to highlight a smiley,
Function Key
➔
Smileys
• Palabra (external keypad only)
• Abc
• ABC
+
• 123 (external keypad only)
then press the Center Select Key
into your text.
OK to insert it
• Symbols
• Smileys
• Quick Text
Entering Text Using the External Keypad
The external keypad provides quick and easy text input, using
standard text entry modes for phone keypads.
• Domain Extensions (To: fields only)
Note: Available text entry modes will depend on the type of field, and
whether the phone is open or closed.
60
Entering Text using T9 Word
Entering Text using Palabra
T9 Word is a predictive text entry mode that recognizes common
words matching the sequence of your key presses and inserts
the most common word into your text. T9 Word requires only one
key press per letter of the word, and is much faster than
traditional text entry.
Palabra is a predictive text entry mode for Spanish that
recognizes common words matching the sequence of your key
presses and inserts the most common word into your text.
Palabra requires only one key press per letter of the word, and is
much faster than traditional text entry.
ᮣ
To switch to T9 Word mode, press the Left Soft Key
Entry Mode T9 Word
While entering text:
ᮣ
To switch to Palabra mode, press the Left Soft Key
Entry Mode Palabra
While entering text:
➔
.
➔
.
•
•
•
Press the key for each letter only once.
•
•
•
Press the key for each letter only once.
Enter the entire word before editing or deleting characters.
Use these keys to enter special characters:
Enter the entire word before editing or deleting characters.
Press
to backspace to clear one character. Press and hold to clear
–
Press
to switch between T9 Word (initial case), T9 word (lower
an entire word.
case) and T9 WORD (upper case).
•
Use these keys to enter special characters:
–
–
Press
Press
to enter a space.
once to enter a period.
–
Press
to switch between Palabra (initial case), palabra (lower
case) and PALABRA (upper case).
–
–
Press
Press
to enter a space.
once to enter a period.
Tip: Press
twice to enter the Smiley “:)
”
Press
three times to enter the Smiley “:-)
”
Tip: Press
twice to enter the Smiley “:)
”
Press
three times to enter the Smiley “:-)
”
Entering Text
61
Entering Text using Abc Mode
Entering Numbers
Abc mode is standard text entry mode for mobile telephones, and
is the default text entry mode when using the external keypad.
Use 123 mode to enter numbers into a text field.
ᮣ
To switch to 123 mode, press the Left Soft Key
Entry Mode 123
While entering numbers:
ᮣ
To switch to Abc mode, press the Left Soft Key
Entry Mode Abc
While entering text:
➔
.
➔
.
•
•
Press the appropriate key for each number.
•
Press the appropriate key once for the first letter on the key, twice for
the second letter, three times for the third letter, and four times for the
fourth letter.
Press
to backspace to clear one number. Press and hold to clear
multiple numbers in a string.
Entering Symbols
•
•
•
When the first letter displays, pause briefly to advance to the next
letter, or press another key.
Use Symbols mode to enter common symbols into a text field.
1. To switch to Symbols mode, press the Left Soft Key
Press
to backspace to clear one character. Press and hold to clear
an entire word.
Entry Mode
The first of 3 SYMBOLS pages displays.
2. Use the Directional Key to scroll through the symbols
on a SYMBOLS page to highlight a symbol, then press the
Center Select Key OK to insert it. Press the Left Soft
Key Prev to move to the previous page. Press the
Right Soft Key Next to move to the next page.
➔
Symbols.
Use these keys to enter special characters:
–
Press
to switch between Abc (initial case), abc (lower case) and
ABC (upper case).
–
–
Press
Press
to enter a space.
once to enter a period, twice for an ampersand “@”, three
times for a question mark “?”, and four times for an exclamation mark
“!”.
Tip: You can also press the key for the number corresponding to a symbol.
62
Entering Smileys
Use Smileys mode to enter smiley symbols into a text field.
1. To switch to Smileys mode, press the Left Soft Key
Entry Mode
The first of 3 SMILEYS pages displays.
2. Use the Directional Key to scroll through a SMILEYS
page to highlight a Smiley, then press the Center Select
➔
Smileys.
Key
Key
OK to insert it into your text. Press the Left Soft
Prev to move to the previous page. Press the
Right Soft Key
Next to move to the next page.
Tip: You can also press the key for the number corresponding to a Smiley.
Entering Text
63
Section 6: Messaging
This section explains how to send and receive messages, and
other features and functionality associated with messaging.
Special Messaging Features
Your phone includes special features to make messaging easy
New Message Key
Types of Messages
Your phone can send and receive:
Use the
New Message Key on the QWERTY keyboard to
•
•
•
•
•
•
Text Messages
quickly open a new message, right from the Home screen, or
from other applications like Contacts, My Pictures or My Sounds.
For more information, see “New Message Key” on page 22.
Picture Messages
Voice Messages
Mobile IMs
Quick Reply
Mobile Email and Mobile Web Email
Chat
While viewing a message, you can just begin typing to reply with
a quick TXT message reply.
Using the QWERTY Keyboard
For fast and easy messaging, use the QWERTY keyboard:
QWERTY Action
You can set the QWERTY Action setting to automatically open a
new Text Message when you open the phone and begin entering
characters. For more information, see “QWERTY Action” on
page 127.
•
Open the phone to access the QWERTY keyboard in landscape mode.
page 59.
•
Use the QWERTY keyboard to create and send messages. For more
information, see “Entering Text Using the QWERTY Keyboard” on
page 59.
Note: Instructions for creating and sending messages are described using
the QWERTY keyboard, unless otherwise stated in the procedure.
64
•
Use the QWERTY keyboard to enter a recipient’s phone number,
contact name, or Email address. As you enter characters, matching
contacts display in a list. Use the Directional Keys to highlight a
Creating and Sending Text Messages
Text Messages are simple messages containing text, which can
be send to another mobile phone or to an Email address. Your
phone also supports Enhanced Text Messages, which can
contain specific types of pre-loaded attachments such as
sounds, graphics, animations, and name cards.
contact, then press the OK Key
OK.
Tip: While entering recipients into the To: field, press the Left Soft Key
to switch between Abc ABC and Symbols text entry modes, or
choose Domain Extensions to insert .com .net, or .edu
,
@
,
,
.
Text messages are also known as SMS (Simple Messaging
Service) messages.
3. Use the
Directional Keys to move to the Text: field,
then compose your message. For more information about
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
entering text, see “Entering Text” on page 59.
the phone and slide it open to access the QWERTY keyboard.
4. While entering text, press the Right Soft Key
1. From the Home screen, press the Left Soft Key
Options for these options:
Message
➔
New Message
➔
TXT Message.
• Insert Quick Text: Choose from 16 pre-loaded phrases.
– or –
From the Home screen, press the
• Save As Draft: Save a copy of the message in the Drafts folder.
New Message Key
.
• Add: Add a Graphic, Animation or Sound from media pre-loaded on
your phone, a contact’s Name Card, or Contact Number/Email.
(Messages sent to Email addresses can only include a Contact
Number/Email.)
2. At the NEW TXT MESSAGE screen, enter up to 10 recipients
in the To: fields:
•
Press the Right Soft Key
Add to select recipients from:
• Format Text: Change the Alignment, Font Size, Font Style, Text
Color, and Background Color.
–
–
–
From Contacts: Choose contacts from the Contacts List.
• Priority Level: Set the urgency of the message, to High or Normal.
Recent Calls: Choose numbers from Recent Calls.
• Callback #: Include a callback number with the message.
Groups: Choose a contacts Group.
Messaging
65
• Cancel Message: Cancel the message, with the option to save it
•
•
Press the Right Soft Key
Add to select recipients from:
in the Drafts folder.
–
–
–
–
–
From Contacts: Choose contacts from the Contacts List.
5. Press the OK Key
SEND, or
Send to send the
Recent Calls: Choose numbers from Recent Calls.
Groups: Choose a contacts Group.
message.
To Online Album: Send the message to your Online Album.
To Blogs: Send to a blog.
Creating and Sending Picture Messages
Use the QWERTY keyboard to enter a recipient’s phone number,
contact name, or Email address. As you enter characters, matching
contacts display in a list. Use the Directional Keys to highlight a
Note: Picture messaging is only available in the Verizon Wireless Enhanced
Services Area.
Picture Messages combine text, pictures, and sound, and can be
sent to other mobile phones, to Email addresses, to your Online
Album, or to a blog.
contact, then press the OK Key
OK.
Tip: While entering recipients into the To: field, press the Left Soft Key
to switch between Abc ABC and Symbols text entry modes, or
choose Domain Extensions to insert .com .net, or .edu
,
@
,
,
.
Picture Messaging is also known as MMS (Multimedia Messaging
Service).
3. Use the
Directional Keys to move to the Slides field.
Pictures you attach are placed on Slides. Use the
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Directional Keys to navigate between slides, or press the
Right Soft Key
4. Use the
1. From the Home screen, press the Left Soft Key
Message, ➔ New Message
➔
Picture Message.
Directional Keys to move to the Text: field,
then compose your message. For more information about
Tip: Sliding the phone open immediately after taking a picture opens a New
entering text, see “Entering Text” on page 59. While
Picture Message.
entering text, press the Right Soft Key
these options:
Options for
2. At the NEW PICTURE MESSAGE screen, enter recipients:
66
• Preview: View the message before sending.
• Save As Draft: Save a copy of the message in the Drafts folder.
• Add Slide: Insert a new slide for a new picture.
• Save As Draft: Save a copy of the message in the Drafts folder.
• Add Quick Text: Choose from 16 pre-loaded phrases.
• Priority Level: Set the urgency of the message, to High or Normal.
• Add Slide: Delete the current slide from the message.
• Priority Level: Set the urgency of the message, to High or Normal.
• Remove Picture: Delete the picture from the current slide.
• Remove Slide: (if more than one slide is attached) Delete the
current slide from the message.
• Remove Slide: (if more than one slide is present) Delete a slide
from the message.
• Cancel Message: Cancel the message, with the option to save it
in the Drafts folder.
• Cancel Message: Cancel the message, with the option to save it
in the Drafts folder.
6. Use the
Directional Keys to move to the Sound: field
to add a sound, if desired. Press the Left Soft Key
Sounds for these options:
5. Use the
then press the Left Soft Key
options:
Directional Keys to move to the Picture: field,
My Pics for these
• Record New: Record a new sound to attach to the message.
•
Use the
Directional Keys to highlight a picture from My
•
Highlight a pre-loaded sound, then press the OK Key
attach the sound.
OK to
Pictures, then press the OK Key
OK to attach the picture.
•
Press the Right Soft Key
Options
:
7. Use the
Directional Keys to move to the Subject: field
–
–
–
–
Take Picture: Launch Camera to capture a new picture.
to enter a subject for the message, if desired. Press the
Left Soft Key to switch between Abc, ABC and
Get New Pictures: Download new pictures.
Rename: Change the name of the highlighted picture.
File Info: View information about the highlighted picture.
Symbols text entry modes, or choose Quick Text to add one
of 16 pre-loaded phrases.
While adding a picture, press the Right Soft Key
Options for these options:
• Preview: View the message before sending.
Messaging
67
8. Use the
Directional Keys to move to the Name Card:
3. At the NEW VOICE MESSAGE screen, enter recipients:
field to add a name card, if desired. Press the Left Soft Key
Add, then select My Name Card, or Contacts to
choose another contact’s name card.
•
Press the Right Soft Key
Add to select recipients:
–
–
–
From Contacts: Choose contacts from the Contacts List.
Recent Calls: Choose numbers from Recent Calls.
Groups: Choose a contacts Group.
9. Press the OK Key
SEND or
Send to send the
•
Use the QWERTY keyboard to enter a recipient’s phone number,
contact name, or Email address. As you enter characters, matching
message.
contacts display in a list. Use the
a contact, then press the OK Key
Directional Keys to highlight
Creating and Sending Voice Messages
Voice Messages combine text and voice recordings, and can be
sent to other mobile phones, or to Email addresses.
OK.
Tip: While entering recipients, press the Left Soft Key
to switch
between Abc
,
ABC and Symbols text entry modes, or choose Domain
Extensions to insert
@
,
.com, .net, or .edu.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
4. Use the
Directional Keys to move to the Voice: field,
1. From the Home screen, press the Left Soft Key
where your voice recording appears. Press the Left Soft
Message
➔
New Message
➔
Voice Message
.
Key
2. Create a voice recording:
5. Use the
Directional Keys to move to the Text: field,
then compose your message. For more information about
entering text, see “Entering Text” on page 59.
While entering text, press the Right Soft Key
Options to choose from these options:
•
•
Press
OK to start recording.
Press the Left Soft Key
the Left Soft Key
Pause to pause recording. Press
Resume to restart recording.
•
Press the OK Key
message.
STOP to stop recording and save it in the
• Review: Listen to the message before sending.
• Save As Draft: Save a copy of the message in the Drafts folder.
68
• Add Quick Text: Choose from 16 pre-loaded phrases.
Receiving Messages
• Priority Level: Set the urgency of the message, to High or Normal.
When you receive a message, you can choose to:
• Cancel Message: Cancel the message, with the option to save it
•
•
View Now: Open the message for viewing.
in the Drafts folder.
folders. For more information, see “Message Folders” on page 71.
Reject: If you have disabled the Multimedia Auto Receive setting,
reject the message. The message is not saved to Messages. For more
information, see “Messaging Settings” on page 78.
6. Use the
Directional Keys to move to the Subject: field
to enter a subject for the message, if desired. Press the
•
Left Soft Key
to switch between Abc, ABC and
Symbols text entry modes, or choose Quick Text to add one
of 16 pre-loaded phrases.
Tip: If you want to control when you download multimedia content, you can
disable Multimedia Auto Receive.
7. Use the
Directional Keys to move to the Name Card:
field to add a name card, if desired. Press the Left Soft Key
Add, then select My Name Card, or Contacts to
choose another contact’s name card.
8. Press the OK Key
SEND, or
Send to send the
message.
Messaging
69
Viewing Text Messages
Viewing Picture or Voice Messages
When you receive a text message, the alert sounds (unless
turned off), and New Text Message appears in the display.
When you receive a Picture or Voice message, the alert sounds
(unless turned off), and New Multimedia Msg appears in the
display.
1. At the New Message prompt, press the Center Select Key
1. At the New Message prompt, press the Center Select Key
OK to View Now
2. Press the Center Select Key
message with a new Text, Picture, or Voice message.
3. Press the Left Soft Key Erase to delete the message.
.
OK to View Now
.
REPLY to respond to the
2. After loading, the attachment (and text, if any), the
message appears in the display. Use the
Directional Key to scroll to see the entire message, if
necessary.
4. While viewing the message, press the Right Soft Key
Options for these message options:
3. Press the Center Select Key
message with a new Text, Picture, or Voice message.
4. Press the Left Soft Key Erase to delete the message.
REPLY to respond to the
• Forward: Send the message to another recipient.
• Reply w. Copy: Reply to the sender, plus other recipients if desired,
and include a copy of the original message.
• Save Quick Text: Save the message text to the Quick Text list.
5. While viewing the message, press the Right Soft Key
• Lock/Unlock: Lock or unlock the message to prevent deletion.
Options for these message options:
• Add To Contacts: Save the number of the sender to Contacts as a
new entry or update to an existing entry.
• Play again: (Voice or Picture message with attached Sound) Play
the attached sound again.
• Messaging Font Size: Select the font size, Normal or Large.
• Forward: Send the message to another recipient.
• Extract Addresses: Display all Contact Numbers, Email Addresses,
and URLs extracted from the message, to call, send an email, or
open the web page.
• Reply w. Copy: Reply to the sender, plus other recipients if desired,
and include a copy of the original message.
• Message Info: Display details about the message.
70
• Erase: (Voice or Picture message with attached Sound) Delete the
Message Folders
Messages are stored in the message folders, depending on your
selections for Inbox View in Message Settings.
message.
• Set As: Assign the attached picture as Wallpaper or Picture ID.
• Save Sound: (Voice or Picture message with attached Sound) Save
the attached sound to My Sounds.
open one message and press the Directional Key Left or Right
.
• Save Picture: Save the attached picture to My Pictures. (Picture
messages only.)
• Save Quick Text: Save the message text to the Quick Text list.
Note: The Messaging menu depends on the Inbox View setting. For more
information, see “Messaging Settings” on page 78.
• Save as Ringtone: (Voice or Picture message with attached Sound)
Save the attached sound as a ringtone.
Viewing Messages by Contact
• View Name Card: (If Name card is attached) Display the attached
name card.
By default, the Inbox View setting is set to Contact. All incoming
and sent messages are stored in the Messages folder, grouped
number, to provide a threaded view of the message exchange.
• Save Name Card: (If Name card is attached) Save the attached
name card to Contacts.
• Lock/Unlock: Lock or unlock the message to prevent deletion.
• Add To Contacts: Save the number of the sender to Contacts as a
new entry or additional to an existing entry.
Note: For more information about the Inbox View setting, see “Messaging
Settings” on page 78.
• Extract Addresses: Display all Contact Numbers, Email Addresses,
and URLs extracted from the message, to call, send an email, or
open the web page.
1. From the Home screen, press the Left Soft Key
Message
.
• Message Info: Display details about the message.
2. The most recent message from each contact displays.
Numbers to the right of the contact/number indicate the
number of messages from this contact/number.
Messaging
71
3. To view a message thread,
use the Directional
• Manage Messages: Perform an action on multiple message(s).
Choose from Erase Lock Unlock Mark as Read, or Mark as
Unread
,
,
,
.
Key to highlight a contact/
number, then press the
Center Select Key
• Sort Alphabetically: List the message threads by contact name/
number, rather than time.
• Messaging Menu: Launch the Messaging Menu, for access to all
messaging features.
OPEN
4. To send a reply message,
use the Directional
.
• Social Networks: Access Facebook, MySpace or Twitter.
Viewing Messages by Time
When the Inbox View setting is set to Time, incoming messages
are stored in the Inbox, and sent messages are stored in the Sent
folder, sorted by time.
Key to highlight a contact/
number, then press the Left Soft Key
– or –
Reply
.
Note: For more information about the Inbox View setting, see “Messaging
Open the phone and start entering characters on the
Settings” on page 78.
QWERTY keyboard, to send a Quick Reply message.
Inbox folder
5. While viewing the list of contacts/messages, use the
When the Inbox View setting is set to Time, incoming messages
are stored in the Inbox message folder by date and time.
Directional Key to highlight a contact/number, then
press the Right Soft Key
Options for these options:
Note: The Inbox folder is only present when the Inbox View setting is set to
• Erase: Delete all highlighted message(s) from this contact/number.
Time. For more information, see “Messaging Settings” on page 78.
• Add to Contacts: (If the number is not already saved) Save the
phone number to Contacts.
• New Message: Send a new Text, Picture or Voice Message.
72
1. From the Home screen, press the right soft key
Message, then select Inbox
2. Use the Directional Key to scroll through the list of
messages. While viewing the list of messages, press the
Right Soft Key Options for message options:
3. Use the Directional Keys to scroll through the list of
.
messages. Highlight a message, then press the Left Soft
Key
Center Select Key
more information about viewing messages, see “Viewing
Text Messages” on page 70 or “Viewing Picture or Voice
Messages” on page 70.
• Reply: Reply to the sender with a new message.
• Reply w. Copy: Reply to the sender, plus other recipients if desired,
and include a copy of the original message.
Sent folder
• Forward: Send the message to another recipient.
When the Inbox View setting is set to Time, outgoing messages
are stored in the Sent message folder by date and time.
• Add To Contacts: Save the number of the sender to Contacts as a
new entry or additional to an existing entry.
• Extract Addresses: Display all Contact Numbers, Email Addresses,
and URLs extracted from the message, to call, send an email, or
open the web page.
Note: The Sent folder is only present when the Inbox View setting is set to
Time. For more information, see “Messaging Settings” on page 78.
1. From the Home screen, press the Right Soft Key
• Message Info: Display details about the message.
Message, then select Sent
2. Use the Directional Key to scroll through the list of
messages. While viewing the list of messages, press the
Right Soft Key Options for message options:
.
• Manage Inbox: Manage messages in the Inbox with the Erase,
Lock or Unlock, Mark as Read or Mark as Unread commands.
• Sort by Sender/Time: List all messages in the Inbox by Sender or
by Time.
• Sort by Size: List all messages in the Inbox by Size.
• Forward: Send the message to another recipient.
• Resend: Send the message again, to the original recipient(s), plus
new recipients if desired.
Messaging
73
• Add To Contacts: Save the number of the sender to Contacts as a
new entry or additional to an existing entry.
Drafts folder
Drafts are messages that you’ve created, but have not yet sent.
You can return to the Drafts folder at any time to review, edit or
send a draft message.
• Message Info: Display details about the message.
• Manage Sent: Manage messages with the Erase, Lock, or Unlock
commands.
1. From the Home screen, press the right soft key
• Sort by Recipient/Time: List messages by the first addressee, or
by time.
Message, then select Drafts
2. Use the Directional Key to scroll through the list of
messages. While viewing the list of messages, press the
Right Soft Key Options for message options:
.
• Sort by Time/Type: List messages by type (Text, Picture or Voice)
or by time received.
3. Use the
press the Left Soft Key
Directional Key to highlight a message, then
• Send: Send the message, as-is, to the listed recipients.
• Add To Contacts: Save the number of the recipient(s) to Contacts
as a new entry or additional to an existing entry.
message. For more information about viewing messages,
see “Viewing Text Messages” on page 70 or “Viewing
Picture or Voice Messages” on page 70.
• Manage Drafts: Manage messages with the Erase, Lock, or Unlock
commands.
• Sort by Recipient/Time: List messages by the first addressee, or
by time.
• Sort by Time/Type: List messages by type (Text, Picture or Voice)
or by time created.
3. Use the
Directional Key to highlight a message, then
press the Left Soft Key
Erase to delete the message,
or press the Center Select Key
message.
EDIT to edit the
74
Mobile Email
Voicemail
From the Messaging menu, you can view the total of your new
voicemail messages, clear the voicemail counter, and call
voicemail to check messages.
Follow the steps below to access Mobile Email.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Mobile Email.
– or –
Note: Standard Text Messaging charges do not apply when checking
voicemail.
From the Home screen, press the Center Select Key
to select MENU Messaging Email Mobile Email
➔
➔
➔
.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Messaging
➔
Voicemail.
2. Follow the on-screen prompts for subscribing.
2. On the VOICEMAIL screen, view the number of new
messages and the time. Press the Center Select Key
Note: Subscription rates apply for Mobile Email.
3. Use the
Directional Key to highlight an Email
the Left Soft Key
Clear to clear the voicemail counter.
provider, then press the Center Select Key
OK:
• Yahoo! Mail
Note: For more information about setting up and checking voicemail, see
“Voicemail” on page 13.
• Windows Live Hotmail
• Gmail
Email
• AOL Mail
.
• AIM Mail
• Verizon.net
Tip: In Messaging Settings, you can set a default Email client to launch when
you select MENU
➔
Messaging
➔
Email. For more information, see
• Other search for other web Email providers.
“Messaging Settings” on page 78.
4. Use the provider’s on-screen functions and options.
Messaging
75
Mobile Web Mail
Mobile IM
Follow the steps below to access Mobile Web Mail.
Mobile IM allows you to send and receive instant messages from
your phone.
1. From the Home screen, press the Center Select Key
to select MENU
Mail
2. Press the
service, then press the Center Select Key
➔
Messaging
➔
Email
➔
Mobile Web
Note: You’ll need to create the Instant Message account using a PC before
accessing it on your phone.
.
Directional Key to highlight an Email
OK
1. From the Home screen, press the Center Select Key
:
to select MENU
➔
Messaging
➔
Mobile IM. The first
• Windows Live
time you launch Mobile IM, you’ll be prompted to accept
the terms and conditions.
• AOL Mail
• Yahoo! Mail
2. Press the
Directional Key to highlight an Email
• Verizon.net
provider, then press the Center Select Key
OK:
• Search for other web Email providers.
• AOL® Instant Messenger™
• Windows Live Messenger
3. Use the provider’s on-screen functions and options to use
the Email application.
®
• Yahoo!
3. Use the provider’s on-screen functions and options for the
Social Beat provides a single point for accessing online
communities and content. For more information, see “Social
Beat” on page 92.
IM application.
76
Social Networks
Chat
Use Social Networks to access Facebook, MySpace, and Twitter
feeds, right from your phone.
Join wireless chat rooms from your phone. Send text messages
and icons to many chat room participants or launch one-on-one
(private) chat rooms.
Note: You must register your phone with your social network site before
1. From the Home screen, press the Center Select Key to
using the phone to access the networks.
select MENU
➔
Messaging
➔
Chat.
Facebook
2. Press the
Directional Key to highlight a chat
Want to set up Facebook on your phone?
site, then press the Center Select Key
OK:.
ᮣ
From your Facebook account, go to Account Settings and
follow the “Activate a Phone” registration instructions in
the Mobile area.
• MySpace
• Facebook
• Twitter
• Photobucket
MySpace
• MCARDS!
Want to set up MySpace on your phone?
• Rate Hotties
ᮣ
From the MySpace Account Settings, follow the “Mobile
Activation” registration settings
• Best Mobile Pix
• More: Choose buzzd or evite
• Search for other chat sites
Twitter
Want to set up Twitter on your phone?
3. Use the on-screen application specific functions and
ᮣ
From Twitter.com Settings, follow the instructions in the
Mobile area to register your phone to send and receive
tweets.
options to use the Chat applications.
Messaging
77
• TXTAutoView: Choose On to automatically display text messages,
Messaging Settings
Define settings for messages sent and received on your phone.
when they arrive, or Off to have the phone prompt you.
• Multimedia Auto Receive: Choose On to automatically accept new
multimedia messages. Choose Off to have the phone prompt you to
download new multimedia messages.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
• Domain Extensions: Create and manage a list of standard web
1. From the Home screen, press the Center Select Key
and Email extensions. Press the Left Soft Key
delete extensions. Press the Right Soft Key
Erase to
New to create
to select MENU
➔
Messaging
.
new extensions. To modify an extension, highlight the extension,
then press
EDIT
.
2. Press the Left Soft Key
Settings
:
• QuickText: Create and manage pre-loaded phrases you can insert
• Inbox View: Set the default message view. Choose Time to display
messages by time received, or Contact to display messages by
name or number (also known as threaded view).
into messages. Press the Left Soft Key
phrases. Press the Right Soft Key
create new phrases. To modify a phrase, highlight the phrase, then
Erase to delete
Options ➔New to
• Entry Mode: Set the default text entry mode when using the
press
EDIT
.
external keypad. Choose T9Word Palabra, Abc, ABC, or 123.
,
• Voicemail #: Enter a new Voicemail speed dial. The default is *86.
• Auto Save Sent: Choose the default save mode for messages you
send. Choose On to save all sent messages, Off to discard sent
messages, or Prompt to have the phone prompt you each time.
• Callback #: Choose On to add a callback phone number to your
messages, and set the phone number. Choose Off to omit a
callback number (you can manually add a callback number to
individual messages).
• Auto Erase Inbox: Choose On to automatically replace the oldest
message of the same type when the Inbox exceeds the maximum
number of messages of that type. For example, when the Inbox
exceeds 100 text messages, the oldest text message is replaced
with a new one. Picture messages are replaced when the phone’s
memory is full. Choose Off to disable automatic erasures.
• Signature: Choose Custom to add a signature to all messages,
then use the Directional Key to move to the signature field to create
the signature. Choose None to disable signatures.
• Delivery Receipt: Choose whether you are notified when a
message you send is delivered. Choose On to be notified for every
message, or Off to disable notification (you can set an optional
delivery receipt for individual messages).
• Messaging Font Size: Set the default size for message text to
Normal or Large
.
78
• Preferred Email: Set your preferred Email client to Mobile Email or
Mobile Web Email, or select Let Me Choose to have the phone
prompt you each time you launch Email.
• Social Networks: Set your preferred social network to Facebook
,
Myspace or Twitter, or select Let Me Choose to have the phone
prompt you each time you launch Social Networks.
Messaging
79
Section 7: Media Center
Media Center includes applications for downloading, creating,
viewing and managing multimedia content, right on your phone.
Get New Ringtones
Use Get New Ringtones to connect to the Media Center catalog to
browse and download new ringtones.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center
➔
.
Note: Charges apply for downloading ringtones and ringback tones. Consult
Verizon Wireless for more information.
Note: Before downloading multimedia content, check available memory. For
more information, see “Memory” on page 136.
1. From the Home screen, press the Center Select Key
to select MENU
Get New Ringtones
2. Use the Directional Key to highlight Get New
Applications, then press the Center Select Key
➔
Media Center
➔
Music & Tones ➔
Search
.
Bing Search is a powerful search tool for locating web content via
your phone, tailored for your current location. For more
information, see “Bing Search” on page 86.
OK.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Search
Music & Tones
Get Ringback Tones
➔
➔
.
Ringback Tones play to callers while the system is connecting
their call. Use Get Ringback Tones to download new ringback
tones.
Music & Tones offers features and applications for managing
songs, tones and sounds.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Music & Tones
Get Ringback Tones
➔
➔
➔
.
80
My Ringtones
My Music
In My Ringtones, download and manage ringtones for use as
Use My Music to launch Music Player to play music files. For
alerts for calls and messages.
more information, see “My Music” on page 93.
1. From the Home screen, press the Center Select Key
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Music & Tones
My Music
My Sounds
to select MENU
My Ringtones
2. Use the
choose one of these actions:
➔
Media Center
➔
Music & Tones
➔
➔
➔
➔
.
.
Directional Key to highlight a ringtone, then
In My Sounds, record and manage sounds for use as alerts for
calls and messages.
•
Press the Left Soft Key
default Ringtone, as a ringtone for a Contact ID, or as Alert
Sounds for All Messages TXT Message Multimedia Message
or Voicemail
Set As to assign the ringtone as the
1. From the Home screen, press the Center Select Key
,
,
,
to select MENU
My Sounds
2. Use the
choose one of these actions:
➔
Media Center
➔
Music & Tones ➔
.
.
•
•
Press the Center Select Key
PLAY to hear the ringtone.
Press the Right Soft Key
ringtone.
Info to view details about the
Directional Key to highlight a sound, then
3. To download new ringtones, use the Directional Key to
highlight Get New Ringtones, then press OK
•
Press the Left Soft Key
default Ringtone, as a ringtone for a Contact ID, or as Alert
Sounds for All Messages TXT Message
or Voicemail
Set As to assign the sound as the
.
,
,
Multimedia Message
,
.
•
•
Press the Center Select Key
Press the Right Soft Key
PLAY to hear the sound.
Options to for these options:
–
Send: Attach the sound to a new Picture Message.
Media Center
81
–
–
–
To Online Album: Send the sound to your Online Album. (Only
available for sounds you have recorded.)
• Limit for Send: Set the time limit for the new sound to 1 minute,
suitable for sending in a Voice or Picture Message.
Rename: Change the name of the sound file. (Only available for sounds
you have recorded.)
• For Save: Set the new sound for no time limit.
4. Use these actions to record a sound file:
Move: Move the sound from the phone’s memory to an optional
installed memory card, or from a memory card to the phone. (Only
available for sounds you have recorded, if an optional memory card is
installed.)
•
•
Press the Center Select Key
Press the Left Soft Key
OK to start recording.
Pause to pause recording. Press the
Left Soft Key
Resume to restart recording.
–
–
–
–
Lock/Unlock: Protect the sound file from deletion, or remove
protection. (Only available for sounds you have recorded.)
5. Press
STOP to stop recording and save the sound.
Sync Music
Erase: Delete the highlighted sound file. (Only available for sounds you
have recorded.)
Use Sync Music to transfer music between your phone and PC.
Erase Files: Mark sounds for deletion. (Only available for sounds you
have recorded.)
1. From the Home screen, press the Center Select Key
to select MENU
Sync Music
2. Use the
press the Center Select Key
➔
Media Center
➔
Music & Tones
➔
File Info: View details about the sound file.
.
Recording a new sound
1. From the Home screen, press the Center Select Key
Directional Key to highlight an option, then
OK
to select MENU
My Sounds
2. Use the
➔
Media Center
➔
Music & Tones
➔
:
.
• Sync Music to Phone: Transfer music to the phone’s internal
memory.
Directional Key to highlight Record New, then
• Sync Music to Card: Transfer music to an optional installed
memory card.
press the Center Select Key
OK.
3. Press the Left Soft Key
RecTime to set the recording
3. Plug a USB cable into your phone and connect it to a USB
time. Use the
Directional Key to highlight an option,
OK
port on your PC.
then press the Center Select Key
:
82
4. At the prompt on the PC, select a sync method:
2. Follow the on-screen prompts to download pictures and
wallpaper from the Media Center server.
• Open device to view files using Windows Explorer: Drag and
Note: Charges may apply when downloading pictures. Consult Verizon
• Sync digital media files using Windows Media Player: Use
Windows Media Player on the PC to manage your phone’s music.
Wireless for information.
• Manage the device using Rhapsody: For more information, see
“V CAST Music with Rhapsody” on page 96.
My Pictures
Use My Pictures to view and manage pictures stored on your
phone and/or optional microSD card. For more information,
see “My Pictures” on page 100.
5. Transfer music files to your phone .
TM
6. When finished, press the Center Select Key
DISCONNECT. At the prompt “Disconnect?”, highlight Yes
then press the Center Select Key OK. After
disconnecting, you can unplug the USB cable.
Pictures
,
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Pictures
Pictures
Take Picture
➔
➔
➔
My
.
Pictures offers features and applications for managing pictures
on your phone.
You can use Take Pictures to launch your phone’s built-in camera
to take pictures. For more information, see “Taking Pictures” on
page 98.
Get New Pictures
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Pictures
Picture
Use Get New Pictures to download new pictures and wallpaper
from the Media Center server.
➔
➔
➔
Take
1. From the Home screen, press the Center Select Key
.
to select MENU
New Pictures
➔
Media Center
➔
Pictures
➔
Get
.
Media Center
83
Online Album
Games
Store pictures from your phone in your Verizon Wireless Online
Play fun and interesting Games, right on your phone.
Album
.
1. From the Home screen, press the Center Select Key
to select MENU
2. Use the Directional Key to highlight a game, then press the
Center Select Key OK to launch the game.
➔
Media Center
➔
Games.
Note: Before using Online Album, set up your account by visiting the Verizon
1. From the Home screen, press the Center Select Key
3. To browse and download new games, use the
to select MENU
Album
➔
Media Center
➔
Pictures
➔
Online
Directional Key to highlight Get New Applications
.
.
Choose Subscription or Unlimited, then follow the prompts
The browser launches, displaying the Online Album login
screen.
to download and install games.
Mobile Web
2. Enter your login credentials, then use the Directional Keys
to highlight Sign In
.
Use your phone’s built-in browser to access Mobile Web. For
more information, see “Mobile Web” on page 86.
3. Press the Center Select Key
OK to connect to your
ᮣ
From the Home screen, press the Center Select Key
to select MENU Media Center Mobile Web.
Online Album
➔
➔
84
Browse & Download
Extras
Use Browse & Download to load applications on your phone.
Extras offers the ability to browse and download extra items to
your phone.
Note: Some applications may require a subscription or charge at download.
1. From the Home screen, press the Center Select Key
to select MENU
2. Use the Directional Key to highlight an application, or
highlight Get New Applications, then press the Center
Select Key OK
3. Follow the prompts to download and install the application.
➔
Media Center
➔
Extras.
1. From the Home screen, press the Center Select Key
to select MENU
Download
➔
Media Center
➔
Browse &
.
.
2. The list of default applications displays. Use the
Directional Key to highlight an application, or
highlight Get New Applications, then press the Center
Select Key
OK.
3. Follow the prompts to download and install the application.
Note: Default applications include Social Beat, Mobile Email, and
®
VZ Navigator . Since these are default applications on your phone,
you can download them from Browse & Download, or you’ll be
prompted to download the first time you select the application’s icon in
the Menu.
Media Center
85
Section 8: Web and Social Networking
This section outlines the web and social networking applications
available on your phone. Browse the web, keep in touch with
social networking
Mobile Web
The Mobile Web browser allows you to browse the web from your
phone.
Note: Instructions for Web and Social Networking applications are described
Note: This feature is only available in the United States, in the Verizon
using the QWERTY keyboard, unless otherwise stated.
Wireless Enhanced Services Area.
Any time the
Data Call icon appears in the Annunciator Line, you
Bing Search
Bing Search is a powerful search tool for locating web content via
are connected to the Internet and billed accordingly. Rates and prices
vary according to your service contract. For further information,
contact Verizon Wireless.
your phone, tailored for your current location.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Search
Launching Mobile Web
➔
.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
The first time you launch Bing, you’ll be prompted to
download and install the application, and to agree to the
terms of service.
the phone and slide it open to access the QWERTY keyboard.
ᮣ
From the Home screen, press the Up
Directional Key.
Mobile Web launches the VZW Today default home page.
Tip: You can also launch Mobile Web by selecting MENU
Mobile Web
➔
Media Center➔
.
Exiting Mobile Web
ᮣ
To exit Mobile Web, press the
End/Power key.
86
Changing the Screen Orientation
Send Key: Press to dial a highlighted number.
You can use Mobile Web with your phone closed or open. When
you slide the phone open, the screen orientation automatically
changes to landscape mode.
CLR Key: Press once to back up one page. Press and
hold to go back to Mobile Web home page.
When entering text, press to clear the last character.
Press and hold to completely clear the text field.
Navigating Mobile Web
Navigate web pages in Mobile Web using your phone’s command
keys. When you use Mobile Web, some keys operate differently.
Numbers 1 - 0: Use the number keys to select
Mobile Web presents on-screen items in several ways. Use your
phone’s command keys to navigate web content
numbered list items, or enter numbers in text fields.
Mobile Web Command Key Functions
Left Soft Key: The Left Soft Key function depends on
the type of content that’s highlighted. For example:
Directional Keys: Press the Directional Keys in any
direction to move the cursor on web pages, to scroll
through lists and highlight options.
•
Select: Press to open a list of items, then use
Directional Keys to highlight an item. Press the
Left Soft Key again, or press the
OK Key.
While browsing with the phone open, you can use the
DirectionalKey,ortheDirectionalKeysontheQWERTY
keyboard.
•
•
•
Go: Press to go to the highlighted URL or link.
Edit: Press to insert the cursor into a text field.
OK: Press to accept the text in a text field.
Right Soft Key: The Right Soft Key function depends
Center Select Key: Press to select a highlighted item,
onthetypeofcontentthat’shighlighted.Forexample:
or to accept a prompt.
•
•
Menu: Press to display a list of web options.
End/Power Key: Press to exit Mobile Web and return
to the Home screen.
Back: Press to go back to the previous page.
Web and Social Networking
87
Entering a URL
Using Favorites
Enter a URL, or web address, to go to the web page or create a
Favorite bookmark.
While browsing the web, you can bookmark a page to quickly
and easily access it in the future.
Accessing Favorites
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the
Directional Key Up.
Mobile Web launches to display the VZW Today home page.
Access Favorites directly from the VZW Today home page:
1. From the Home screen, press the the
Directional Key
2. Press the Right Soft Key
URL
3. Use the
Menu, then select Go to
Up. Mobile Web launches the VZW Today default home
.
page.
Directional Key to move the cursor to the
2. On the VZW Today home page, use the
Key to highlight the Favorites link, then press the Left Soft
Key Go or the OK Key OK to launch the
Favorites page.
Directional
URL Address field, where the http:// prefix is entered for
you, and enter the web address.
4. Use the
these options, then press the Left Soft Key
the OK Key OK
Directional Keys to move the cursor to one of
Go or
.
• Go: To go to the web address.
• Add to Favorites: To save the URL to your Web Favorites.
88
Adding Favorites
6. Use the
Add to Favorites button, then press the Left Soft Key
Go or the OK Key OK Key
Directional Keys to move the cursor to the
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
.
the phone and slide it open to access the QWERTY keyboard.
The web page is added as a Favorite, and displays on the
1. From the Home screen, press the
Mobile Web launches displaying the VZW Today page.
2. On the VZW Today home page, use the Directional
Keys to highlight the Favorites link, then press the Left Soft
Directional Key Up.
Favorites page.
Managing Favorites
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
Key
Favorites page.
3. Use the
Go or the OK Key
OK to launch the
1. From the Home screen, press the Up
Mobile Web launches displaying the VZW Today page.
2. On the VZW Today home page, use the Directional
Keys to highlight the Favorites link, then press the Left Soft
Directional Key.
Directional Keys to highlight the ADD
FAVORITES link, then press the Left Soft Key
the OK Key OK
4. On the Add Link page, use the
Go or
.
Key
Go or
OK Key to launch the Favorites
Directional Keys to
page.
move the cursor to the Name of this link: field, then enter a
name for the Favorite.
3. Use the
Directional Keys to highlight the MANAGE
Go or
FAVORITES link, then press the Left Soft Key
the OK Key OK
5. Use the
Directional Keys to move the cursor to the
.
Address (URL): field, then enter the URL for the web page.
Web and Social Networking
89
4. Under My Folders, use the
highlight an option, then press the Left Soft Key
or the OK Key OK
Directional Keys to
Mobile Web Menu
Go
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
:
the phone and slide it open to access the QWERTY keyboard.
• Create: Make a new folder on the Favorites page for organizing
While browsing, press the Right Soft Key
from a list of menu options:
Menu to choose
your Favorites.
• Delete: Erase a folder from the Favorites page.
ᮣ
From the Home screen, press the Up
Directional Key.
• Rename: Change the name of a folder on the Favorites page.
5. Under MyLinks, use the
an option, then press the Left Soft Key
OK Key OK
Directional Keys to highlight
• VZW Home: Go to the VZW Today Mobile Web home page.
Go or the
• Add Favorite: Save the URL of the current page to Favorites. For
more information, see “Adding Favorites” on page 89.
:
• Add: Create a new Favorite.
• Search: Enter keywords to search the web.
• Go to URL: Enter a URL address to go directly to a page.
• Show URL: Display the URL for the current page.
• Back: Go to the previous page.
• Delete: Erase a Favorite.
• Move: Change the folder location of a Favorite.
• Edit: Modify a Favorite.
• Reorder: Change the sorting order of Favorites.
Cookies to delete web cookies, or Autofill to clear autofill memory.
• Settings: Choose settings to customize Mobile Web to your
preferences. For more information, see “Mobile Web Settings”
on page 91.
• Advanced: Choose About to view information about Mobile Web,
Refresh to reload the current web page, History to view recently-
viewed pages, or Encryption for encryption settings.
90
Placing a Call from Mobile Web
Mobile Web Settings
You can place a call directly from a phone number on a web
page, while using Mobile Web.
Use Mobile Web settings to customize Mobile Web to your
preferences.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the
Mobile Web launches displaying the VZW Today page.
2. Locate the desired telephone number on a web page, then
Directional Key Up
.
ᮣ
From the Home screen, press the Up
Directional Key.
Mobile Web launches displaying the VZW Today page.
• Downloads: Choose Display Images to turn automatic
downloading and display of images On or Off. Choose Media to
use the
Directional Keys to highlight the phone
turn automatic downloading of other media On or Off
.
number.
• Restart Browser: Re-launch Mobile Web
.
3. Press the Left Soft Key
Go or the OK Key
OK
• Scroll Mode: Choose Scroll Speed to set the speed of scrolling
with the Directional Keys to Slow Normal, or Fast. Choose Scroll
,
to call the phone number.
Style to select Block or Smooth scrolling with the Directional Keys.
4. To end the call, press the
to the Home screen, or press the
to the web page in Mobile Web.
End/Power Key to return
• Send Referrer: Choose On or Off to control sending of referrer
message.
Clear Key to return
• Key Press Time Out: Set the length of time before a key press
times out, to Slow Medium, or Fast, or choose Off.
,
• Connection Time Out: Set the length of time Mobile Web will wait
Tip: If you make or answer a call while using Mobile Web, the web session is
suspended during the call. When the call ends, your Mobile Web session
resumes at the last web page.
for a page to load before timing out, from 30 seconds or 60
seconds
.
Web and Social Networking
91
Social Beat
Social Beat provides a single point for accessing online
communities and content. You can save your usernames (but not
passwords) to allow faster sign-in.
Note: This procedure uses the QWERTY keyboard and command keys. Rotate
the phone and slide it open to access the QWERTY keyboard.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Social Beat.
2. Use the Directional Key to scroll through available
online communities and content providers, including:
• Social Beat My Stream
• Facebook
• GMail
• Talk
• MySpace
• RSS
• Twitter
92
Section 9: Music
This section describes how to use the music features of your
phone.
Each time you launch My
Music, it checks your
My Music
phone memory, and
Use My Music to play music files that you transfer from your PC,
or from an optional installed memory card.
optional memory card, for
music files to update your
My Music supports the following music file formats:
music Library
.
•
•
•
•
MP3 with the file extension .mp3
AAC with the file extension .aac
AAC+ with the file extension .m4a
WMA9 with the file extension .wma
The My Music screen
appears, displaying the
first song in the Library.
You can play music with the slide open or closed.
From the Home screen, press the Center Select Key
to select MENU Media Center Music & Tones
My Music
Playing Music
ᮣ
2. Use the Center Select Key
and
Directional Key
➔
➔
➔
➔
to control playback:
.
•
Press the Center Select Key to Play the song. Press the Center
Select Key again to Pause playback.
1. From the Home screen, press the Center Select Key
to select MENU Media Center Music & Tones
My Music
•
Press the Directional Key Left to
Skip Back to the previous
song. Press and hold the Left Directional Key
to Scan
➔
➔
Backward through the current song.
.
Music
93
•
Press the Directional Key Right to
Skip Forward to the
4. Press the Right Soft Key
Options for these options:
previous song. Press and hold the Directional Key Right
to
• Exit Player: Close My Music.
Scan Forward through the current song.
• Play Mode: Choose from Normal, Shuffle, Repeat One, Repeat All
and Shuffle Repeat All for the play mode.
•
•
Press the Directional Key Down to
Stop playback.
Press the Directional Key Up to toggle between
Play modes:
• Add to Playlist: Adds the current song to a playlist. (A playlist must
exist in order to add the song.)
–
–
–
–
Shuffle: Plays songs in the current playlist, in random order.
Repeat One: Repeats the current song.
1
• Music Only Mode: Select On to have your phone act as a music
player only, or Off to allow My Music to play in the background.
Turning this option On disables all wireless communication.
Repeat All: Repeats all songs in the current playlist.
A
A
Shuffle Repeat All: Repeats all songs in the current
playlist, in random order.
3. Press the Left Soft Key
• Song Info: View details about the song title, artist and album.
Library to choose music to
• Player Settings: Set preferences for My Music:
play. Use the Directional Key to highlight an option,
then press the Center Select Key VIEW
–
Skin: Choose a style for My Music, from Simple, Album Artwork,
Visualizer, or Lyrics.
:
–
Memory Info: View memory usage information.
• Resume: Restarts playback of the current paused playlist.
Creating a Playlist
1. From the Home screen, press the Center Select Key
• Now Playing List: Displays the name of the current song playing.
• All Songs: Display all songs in your library, in alphabetical order by
song title.
to select MENU
My Music
➔
Media Center
➔
Music & Tones
➔
• Playlists: Displays all playlists.
• Artists: Lists songs by artist.
• Genre: Lists songs by genre.
• Albums: Lists songs by album title.
.
2. Press the Left Soft Key
Library, then select Playlists
.
3. Press the Right Soft Key
Options, then Create New
.
4. Enter the name of the playlist and press the Center Select
Key OK
• Expired Songs: Displays songs for which the subscripton has
expired (subscription music only).
.
94
Adding song(s) to a playlist
Editing a Playlist
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
My Music
2. Press the Left Soft Key
3. Use the Directional Key to highlight a playlist, then
press the Left Soft Key View
4. Press the Right Soft Key Options, then choose Add
Songs. Use the Directional Key to highlight song(s) to
add to the new playlist and press the Center Select Key
MARK, or press the Right Soft Key Mark All
5. When you are finished marking songs, press the Left Soft
Key Done
➔
Media Center
➔
Music & Tones
➔
to select MENU
My Music
2. Press the Left Soft Key
3. Use the Directional Key to highlight a playlist, then
press the Left Soft Key View
Options, then choose from
➔
Media Center
➔
Music & Tones
➔
.
.
Library, then select Playlists
.
Library, then select Playlists.
.
.
4. Press the Right Soft Key
these editing options:
• Reorder: Change the order of songs in the playlist. Press the
Center Select Key MARK to display up and/or down arrows,
then use the Directional Key to move the song to a new position in
the playlist. Press DONE to save the new order.
.
.
• Remove Songs: Delete songs from the playlist. Highlight a song
and press the Center Select Key MARK to mark all songs for
deletion. To delete all songs, press the Right Soft Key Mark All
Press DONE to delete marked songs.
.
Music
95
Download Music to your PC
V CAST Music with Rhapsody
1. On your PC, launch V CAST Music with Rhapsody
.
(Subscription and PC Downloads)
V CAST Music with Rhapsody® is a digital music service that lets
you listen to millions of songs from thousands of artists. Discover
new and old favorites in an extensive music catalog.
2. Log in. After logging in, locate and download music files.
• Purchasing music
:
–
–
–
Browse the catalog and select tracks or albums to purchase.
Download V CAST Music with Rhapsody to your PC to sync
tracks, albums, and playlists to your new phone, while managing
your existing PC music library, all in one place.
Re-enter your password.
Confirm the purchase and the download will begin shortly.
• Adding subscription music (requires V CAST Music with
Rhapsody subscription)
®
:
V CAST Music with Rhapsody is compatible with Windows 7,
Vista or XP Service Pack 2, with the latest Windows updates and
the latest Windows Media Player. MAC OS and Linux are not
supported.
–
–
Review subscription offerings.
Drag and drop tracks to My Library, or click the Add button next to the
song.
Import Songs from an Audio CD
For complete system requirements, and to download V CAST
Music with Rhapsody for free, visit www.verizonwireless.com/music
.
Import CDs into V CAST Music with Rhapsody, so that you can
transfer them to your phone.
1. On your PC, launch V CAST Music with Rhapsody
.
2. Insert an audio CD into the CD-ROM drive.
3. The tracks on the CD display in the window. Select tracks
for import by clicking the check boxes.
4. Click on the “Import CD” button to import your selections.
96
Transfer Music from Your PC to Your Phone
Use V CAST Music with Rhapsody to transfer music from your PC
to your Phone.
1. Plug a USB cable into your phone and connect it to a USB
port on your PC.
2. On your phone, at the prompt “SELECT USB MODE”,
highlight Sync Music to Phone to transfer music to your
phone’s memory, or Sync Music to Card to transfer music to
an optional installed memory card. Press the center Select
Key
3. At the prompt on the PC, select Manage the device using
Rhapsody. For more information, see “V CAST Music with
Rhapsody” on page 96.
Music
97
Section 10: Pictures
This section describes how to use the picture features of your
phone to create, download and manage your image files.
3. Using the display screen as a viewfinder, compose your
picture by aiming the lens at your subject.
Taking Pictures
4. Press the
Camera Key or the Center Select Key
Take pictures with your phone’s built-in camera by choosing a
subject, pointing the camera, and pressing the Camera key. The
camera produces photos in JPEG format.
TAKE to take the picture.
Tip: Open the phone immediately after taking a photo to resize the photo and
create a new picture message with the new photo attached.
Important!: Do not take photos of people without their permission.
Do not take photos in places where cameras are not allowed.
Do not take photos in places or in a manner where you may
interfere with another person’s privacy.
5. After taking a photo, use the soft keys for these options:
•
•
Press the Right Soft Key
Erase to delete the new photo.
Do not point the camera toward a person’s or animal’s eyes for
more time than required to take the picture. (This camera
projects infrared light toward the picture subject when the light
vision setting is “On” in the Camera mode. Prolonged exposure
to the infrared light may damage the picture subject’s eyes).
Press the Center Select Key
and attach it to a new picture message.
SEND to resize the new photo
•
Press the Left Soft Key
Pictures.
Save to save the picture to My
1. From the Home screen, press and hold the
Camera Key on the right side of the phone.
use the external command keys, or the QWERTY command keys.
2. Set Options, if desired. For more information about Camera
Options, see “Camera Options” on page 99.
98
Camera Options
Camera Settings
1. From the Home screen, press and hold the
Camera Key on the side of the phone.
2. Press the Right Soft Key
Options for these options:
2. Press the Right Soft Key
Options , then Settings:
• Settings: For more information, see “Camera Settings” on
page 99.
• Color Effects: Choose an effect to add to photos, from Black &
White Antique Negative Aqua, or Green, or Normal.
,
,
,
• Night Vision: Select On to enable infrared light sensing for low light
conditions, or Off to use available light.
• White Balance: Choose a setting for the light source, from Auto
,
Sunny Cloudy Tungsten, or Fluorescent
,
,
.
• Self Timer: Set a timer for a delay between pressing the Camera
• Memory: Set the location for saving new photos, to Phone for the
Key and the taking of the photo. Choose a timer of 3 Seconds
,
5
phone’s internal memory or Card for an optional memory card.
Seconds, or 10 Seconds, or choose Off
• Quality: Set image quality, from Fine Normal or Economy
• Resolution: Choose a resolution for new photos, from 1280x960
1024x768 640x480 320x240 160x120, or 128x96
• Multishot
.
• Auto Name: Choose On to have the phone automatically assign a
name to new photos, or Off to have the phone prompt you.
,
.
,
• Metering: Choose how the camera measures the light, from
Average, Center, or Spot.
,
,
,
.
:
• Icon Display: Set the display of icons on the screen while taking
pictures. Choose Display All Partial Guideline, or No Icons
,
,
.
–
Series Shot: Takes a series of of pictures. For Number of Pictures
,
choose or to enable a series, or Off to disable. For Auto/Manual,
choose Auto to take a series of pictures with one Camera Key press , or
Manual to press the Camera Key to take each shot.
3
5
• Sound Effect: Select sound effects:
–
Ready Sound plays after you press the Camera Key, but before the
picture is taken. Choose from Off Say Cheese! Look here or 1,2,3!
Shutter Sound plays when the photo is taken. Choose from Off
Shutter OK or Melody
• Reset Settings: Returns camera setting to the defaults.
,
,
.
–
Divided Shot: Takes multiple photos to combine into one image. For
Divided Type, choose a 2x2 grid (4 shots), or 3x3 (9 shots) grid. For
Auto/Manual, choose Auto to take the selected number of shots with
one press of the Camera Key, or Manual to compose each shot and
press the Camera Key to take each one.
–
,
,
.
Pictures
99
• Manage Pictures
:
My Pictures
Use My Pictures to view and manage all pictures pre-loaded on
your phone, taken with the built-in camera, or downloaded and
stored to your phone or optional installed memory card.
–
Erase: Mark pictures for deletion. Use the Directional Key to highlight
a picture, then press the Center Select Key MARK to mark the
picture for deletion. To delete all, press the Right Soft Key Mark
All
.
–
–
–
Lock: Protect the highlighted picture from changes or deletion.
Note: The pictures pre-loaded on your phone are copyright-protected, and
Unlock: Remove protection from the highlighted picture.
cannot be sent as a message attachment.
Move to Phone: If an optional memory card is installed, move pictures
from the card to the phone’s memory. Use the Directional Key to
1. From the Home screen, press the Center Select Key
highlight a picture, then press the Center Select Key
mark the picture for moving. To move all, press the Right Soft Key
Mark All
MARK to
to select MENU
Pictures
➔
Media Center
➔
Pictures
➔
My
.
.
–
Move to Card: If an optional memory card is installed, move pictures
from the phone’s memory to the card. Use the Directional Key to
2. Press the Directional Key in any direction to highlight a
photo.
highlight a picture, then press the Center Select Key
mark the picture for moving. To move all, press the Right Soft Key
Mark All
MARK to
3. While viewing a list of photos, press the Right Soft Key
Options to select these options:
.
• Rename: Change the name of the highlighted picture file.
• Send: Send the highlighted picture as an attachment to a Picture
• File Info: View details about the highlighted picture file.
Message
,
To Online Album
,
Via Bluetooth to another bluetooth
device, To Blogs
,
To Facebook, or To MySpace
.
• Set As: Set the highlighted picture as the Home screen Wallpaper
or as Picture ID for a contact.
• Take Picture: Launch the Camera.
• Get New Pictures: Launch Get New Pictures to download new
pictures from the Media Center server.
100
–
–
–
Copy & Paste: Copy a specific part of another picture as a shape, and
paste it onto the selected picture.
4. To view a photo, use the
Directional Key to highlight
VIEW
the photo, then press the Center Select Key
.
Resize: Change the size of the selected picture. Options are:
1024x768, 800x600, 640x480 and 320x240.
While viewing the picture, press the Right Soft Key
Options for these options:
Rotate/Flip: Rotate the selected picture in incremental steps or flip the
picture horizontally or vertically.
• Send: Send the highlighted picture as an attachment to a Picture
Message To Online Album Via Bluetooth to another bluetooth
device, To Blogs To Facebook, or To MySpace
,
,
• Rename: Change the name of the picture.
,
.
• Move: If an optional memory card is installed, move the picture
between the phone’s internal memory and the memory card.
• Set As: Set the highlighted picture as the Home screen Wallpaper
or as Picture ID for a contact.
• Lock/Unlock: Lock the picture to protect it from deletion, or Unlock
to remove protection.
• Take Picture: Launch the Camera
.
• Zoom
/
Rotate: Use the Volume Key to Zoom in or out, and rotate
• Full View: Display the picture full-screen.
between portrait and landscape mode.
• File Info: View details about the picture.
• Edit: Modify the selected picture.
–
Effects: Choose an effect to apply to the picture, from Normal
Grayscale Sepia Green Blue Sketch Effect Emboss Soft-
Glamorous Soft-Elegant Soft-Charismatic Spring Sun Dawn
Fright Cinema-Normal Cinema-Black & White or Cinema-Old
Decorate: Press the Left Soft Key Add to add a Fun Frame
ClipArt, or Text to the highlight picture.
Revision: Adjust the Brightness Saturation
,
,
,
,
,
,
,
,
,
,
,
,
.
,
,
–
,
–
–
,
,
Sharpness or Blur
.
Merge: Choose two pictures to layer into one. Press the Left Soft Key
Set to choose another picture, then press the Center Select Key
OK. Press the Center Select Key
MERGE to combine the
pictures.
Pictures
101
Section 11: Tools & Applications
The features covered in this section allow you to schedule
appointments, view the calendar, set an alarm, view time zones,
take notes, and perform simple math calculations.
Calculator
Normal
Perform simple mathematical calculations.
Note: Unless otherwise noted, instructions in this section use the external
1. From the Home screen, press the Center Select Key
keypad.
to select MENU
Calculator Normal
2. Enter the first number in your equation, up to 8 digits.
➔
Settings & Tools
➔
Tools
➔
➔
.
Voice Commands
Voice Commands is advanced speech recognition software that
recognizes your spoken commands to dial phone numbers,
create messages, and launch phone features such as Contacts,
Calendar and My Music.
3. Use the
Directional Key to enter a calculation
symbol:
• Up Key: [
+
] Addition
ᮣ
From the Home screen, press the Center Select Key
to
• Down Key: [
-
] Subtraction
select MENU
➔
Settings & Tools
➔
Tools
➔
Voice
• Right Key: [
x
] Multiplication
Commands
• Left Key: [
4. Continue entering numbers and symbols, then press the
Center Select Key OK to perform the calculation.
5. While entering equations, you can use these options:
Press the Right Soft Key Clear or the
Clear Key to delete entries.
÷
] Division
Note: You can also access Voice Commands by pressing the
Voice
Commands Key on the side of the phone.
For more information, see “Voice Commands” on page 37.
•
102
•
Press the Right Soft Key
Operator to enter Left [
(
]
Eco
and Right [
)
]Parentheses or raise a number by a Power.
after a number to change the sign.
to enter a decimal point.
Calculate fuel mileage, efficiency, and estimated number of
pounds of carbon dioxide emitted.
•
•
Press
Press
1. From the Home screen, press the Center Select Key
Tip
to select MENU
➔
Settings & Tools
➔
Tools
➔
Calculate the tip and how much each person should pay.
Calculator
➔
Eco.
1. From the Home screen, press the Center Select Key
2. Use the
Directional Key to highlight fields, then enter
to select MENU
➔
Settings & Tools
➔
Tools
➔
the value in the field:
Calculator
➔
Tip.
• Distance (mile): Number of miles traveled.
• Fuel ($): Cost of fuel purchased.
2. Use the
Directional Key to move to each field:
• Bill: Enter the amount of the bill.
• Fuel (gallon): Number of gallons purchased.
• Tip: Enter the tip percentage.
Note: Press
to enter a decimal point.
• # Paying: Enter the number of people paying.
3. Press the Center Select Key
statistics:
OK to calculate these
Note: Press
to enter a decimal point.
3. As you enter numbers in the fields, the Calculator
• Price ($/gallon): Cost of fuel per mile.
automatically displays the Tip
,
Total bill including the tip,
• Efficiency ($/mile): Efficiency of the vehicle.
and Each person’s share of the bill.
• Efficiency (mile/gallon): Number of miles per gallon.
• Efficiency (Lb per Trip): Number of pounds of carbon dioxide
emitted, based on a gas-powered medium-sized vehicle.
Tools & Applications
103
Converter
5. Use the
field, then press the
choose the units for conversion.
Calendar
Directional Key to highlight the To units
Directional Key Left or Right to
Convert values you enter into selected units.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Tools
➔
Calculator
➔
Converter
.
Schedule up to eight events, with reminders, so that you can
track Set alarms for events to be alerted of an upcoming event.
2. Use the
Directional Keys to highlight a conversion
Adding a new event
type, then press the Center Select Key
OK:
1. From the Home screen, press the Center Select Key
• Temperature
• Length
to select MENU
Calendar
2. On the Calendar screen, use the
highlight a date on the calendar, then press the Center
Select Key VIEW to display the day’s events.
3. Press the Right Soft Key Options to choose:
➔
Settings & Tools
➔
Tools
➔
.
• Weight
• Area
Directional Key to
• Volume
• Currency
3. Use the
Directional Keysto highlight the From units
field, then press the
Directional Key Left or Right to
• Weekly View: View the current week.
choose the units for conversion.
• Go To Date: Specify a date to view.
4. Use the
Directional Key to highlight the From quantity
• Erase All: Delete all events from your calendar.
• Erase All Old: Delete all past events.
field, then enter the quantity.
• Search: Enter criteria to find an event.
Note: Press the
key to enter a decimal point. Press
after a
• Eco Day List: View a list of Eco dates, such as Earth Day.
number to change the sign to negative.
104
4. Press the Left Soft Key
New to add a new event. On
Directional Keys to
Viewing an Event
1. From the Home screen, press the Center Select Key
the NEW EVENT screen, use the
highlight each field, then enter the details with the keypad:
to select MENU
Calendar
➔
Settings & Tools
➔
Tools
➔
.
• Subject: Enter the name of the event.
• StartTime: Enter the start time. Press the
Directional Key to
2. From the Calendar screen, find an event using one of these
set am or pm.
methods:
• End Time: Enter the end time. Press the
set am or pm.
Directional Keys to
•
Use the
Directional Key to highlight a date on the
calendar, then press the Center Select Key
day’s events.
VIEW to display the
• Start Date: Enter the start date for the event.
• End Date: Enter the end date for the event.
•
•
Press the Right Soft Key
enter a date to view.
Options, then select Go To Date and
• Recurrence: Press the Left Soft Key
of the event.
Set to set the frequency
Press the Right Soft Key
criteria, then press the Center Select Key
Options, then select Search. Enter
• Alert Time: Press the
Directional Key to set an alert to
Directional Key to set a reminder of
Directional Key to choose an alert
Directional Key to enable or disable
SEARCH.
sound before the event.
3. While viewing an event, press the Right Soft Key
• Reminder: Press the
the event.
Options for event options:
• Monthly View: View the month’s calendar.
• Weekly View: View the current week.
• Go To Date: Specify a date to view.
• Alert Tone: Press the
tone.
• Vibrate: Press the the
Vibrate notification.
• Erase: Delete the event from the calendar.
• Erase All: Delete all events from your calendar.
• Erase All Old: Delete all past events.
• Search: Enter criteria to find an event.
5. Press the Center Select Key
SAVE to save the event.
Tools & Applications
105
• Erase All: Delete all events from your calendar.
• Erase All Old: Delete all past events.
• Time: Enter the time for the alarm. Use the
to select am or pm
Directional Key
.
• Frequency: Press the Left Soft Key
of the alarm.
Set to set the frequency
• Copy Event: Create a copy of the event, making changes if desired.
–
–
–
–
–
Once: The alarm sounds only once at the specified time.
• Send via Bluetooth: Mark event(s) to send as vCalendar object(s)
to another Bluetooth device. For more information, see
“Bluetooth Menu” on page 112.
Daily: The alarm sounds every day.
Weekdays: The alarm sounds Monday through Friday.
Weekends: The alarm sounds Saturday and Sunday.
Custom: Choose days for the alarm to sound.
Alarm Clock
Set up to three alarms, to go off once, or recur periodically at a
specific time. Once set, alarms are easy to change or turn off.
• Snooze: Press the Left Soft Key
frequency of, snooze delays.
Set to enable, and set the
• Ringer: Use the
Directional Key to select a ringtone.
Note: Alarms scheduled within the next 24 hours will cause the Alarm icon to
appear in the Event Status line on the Home screen.
3. When you finish entering information, press the Center
Select Key
SAVE.
Setting An Alarm
1. From the Home screen, press the Center Select Key
Disabling an Alarm
You can turn an alarm on and off without changing any other
settings.
to select MENU
Clock
2. Press the Center Select Key
Directional Key to highlight fields to enter alarm
details:
• Alarm: Use the
Off
➔
Settings & Tools
➔
Tools
➔
Alarm
.
1. From the Home screen, press the Center Select Key
ADD, then use the
to select MENU
Clock
2. Use the
wish to disable.
➔
Settings & Tools
➔
Tools
➔
Alarm
.
Directional Key to highlight the alarm you
Directional Key to toggle the alarm On or
.
106
3. Press the Right Soft Key
Options, then select Turn Off.
World Clock
View the local time, and the time in 45 cities around the world.
Erasing an Alarm
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools Alarm
Clock
2. Use the
wish to disable.
to select MENU
Clock
2. Choose a time to view with one of these methods:
➔
Settings & Tools
➔
Tools
➔
World
➔
➔
➔
.
.
Directional Key to highlight the alarm you
•
Use the
around the world.
Directional Key to scroll through the time zones
3. Press the Right Soft Key
Options and select Erase, or
•
Press the Left Soft Key
supported cities. Select a city and press the Center Select Key
Cities to select from a list of 45
Erase All to remove all alarms.
OK to view your entry.
Stop Watch
3. To set the displayed time as your local time, press the
Center Select Key OK
4. To enable or disable Daylight Savings Time for the
displayed times, press the Right Soft Key to toggle
between DST On and DST Off
Measure lap times and total elapsed time.
.
1. From the Home screen, press the Center Select Key
to select MENU
Watch
➔
Settings & Tools
➔
Tools
➔
Stop
.
.
2. Press the Center Select Key
3. Press the Left Soft Key
START to start timing.
Lap to record lap times.
STOP to stop timing.
4. Press the Center Select Key
5. Press the Right Soft Key
Reset to erase recorded
times.
Tools & Applications
107
the Right Soft Key
Done to delete the notes.
to Mark All. Press the Left Soft Key
Notepad
Create, store and edit notes in Notepad.
• Lock/Unlock: Locks or unlocks the entry to prevent deletion.
1. From the Home screen, press the Center Select Key
USB Mass Storage
Use your phone to connect to your PC, to transfer files between
the PC and an optional installed memory card.
to select MENU
Notepad
2. To add a new note, press the Left Soft Key
➔
Settings & Tools
➔
Tools
➔
Add, then
1. Install an optional memory card into your phone. For more
enter the note, up to 30 characters. For more information,
information, see “Installing a Memory Card” on page 13.
see “Entering Text” on page 59.
2. Plug a USB Cable into your phone, and connect it to a USB
3. When you’re finished entering the note, press the Center
port on your PC.
Select Key
SAVE.
3. From the Home screen, press the Center Select Key
Managing Notes
to select MENU
Mass Storage
➔
Settings & Tools
➔
Tools
➔
USB
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Notepad
2. Press the
press the Right Soft Key
• Edit: Modify the highlighted note.
• Erase: Delete the highlighted note.
• Erase Notes: Mark multiple notes for deletion. Press the Center
Select Key Mark to mark a specific note to be erased or press
.
➔
➔
➔
Note: You cannot make or receive calls when using USB Mass Storage.
.
Directional Key to highlight a note, then
Options to choose options:
4. At the Removable Disk prompt on your PC, select the
desired action and click OK.
5. After performing the desired action, press the Center
Select Key
DISCONNECT, then confirm the
disconnection at the prompt.
108
VZ Navigator
®
VZ Navigator uses GPS positioning to tell you where you are,
what’s nearby, and to give you directions - quickly and easily.
With audible turn-by-turn directions, you can locate points of
interest in the U.S., including landmarks, restaurants, and even
ATMs.
Note: VZ Navigator requires service activation. Contact Verizon Wireless for
more information.
ᮣ
From the Home screen, press the Center Select Key
select MENU VZ Navigator
The first time you launch VZ Navigator, you’ll be prompted to
to
➔
.
service.
Tip: To use VZ Navigator, you must enable the Location On setting. For more
information, see “Location” on page 127.
Tools & Applications
109
Section 12: Settings
This section explains Settings for customizing your phone to your
needs, and how to access Tools for personal productivity.
• Vibrate Only: No sounds play, but the phone vibrates for incoming
calls and messages, alarms and other alerts.
• Alarm Only: Sounds play for alarms, but not for calls or other alerts.
My Verizon
My Verizon connects to the Verizon Wireless Mobile Web.
• All Sounds Off: No sounds play.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools My Verizon
Master Volume
Tip: Press Play to hear a sample.
➔
➔
.
Tools
The Tools menu provides personal productivity and information
applications.
Set the Master Volume for all the sounds on your phone.
1. From the Home screen, press the Center Select Key
Voice Commands
to select MENU
2. Press the
➔
Settings & Tools
➔
Master Volume
.
Use Voice Commands to operate your phone by speaking
commands. For more information, refer to “Voice Commands”
on page 102.
Volume Key or
Directional Key
Up or Down to highlight a volume level, then press the
Center Select Key SET
:
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Commands
➔
➔
➔
Voice
• High: All sounds play at High volume.
.
• Medium High: All sounds play at medium high volume.
• Medium: All sounds play at medium volume.
• Medium Low: All sounds play at medium low volume.
• Low: All sounds play at medium volume
Tip: You can also launch Voice Commands by pressing the
Commands Key
Voice
.
110
Calculator
Stop Watch
The Calculator provides a Normal mathematical calculator, a Tip
Calculator, an Eco Calculator, and a Converter. For more
information, refer to “Calculator” on page 102.
Measure and record lap times with the Stop Watch. For more
information, refer to “Stop Watch” on page 107.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Watch
World Clock
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Calculator
Calendar
➔
➔
➔
Stop
➔
➔
➔
.
Using World Clock, view the current time in your location, plus
any other time zone in the world. For more information, refer to
“World Clock” on page 107.
Use the Calendar to view a calendar and schedule events. For
more information, refer to “Calendar” on page 104.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Calendar
Alarm Clock
ᮣ
From the Home screen, press the Center Select Key
Clock
Notepad
➔
➔
➔
➔
Set up to three alarms using the Alarm Clock. For more
Record text notes using Notepad. For more information, refer to
information, refer to “Alarm Clock” on page 106.
“Notepad” on page 108.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Clock
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Notepad
➔
➔
➔
Alarm
➔
➔
➔
.
.
Settings
111
USB Mass Storage
Bluetooth Service Profiles
Use the USB Mass Storage tool to connect your phone to your PC
to use an optional microSD memory card, installed in your phone,
as a mass storage device. For more information, refer to “USB
Mass Storage” on page 108.
Bluetooth profiles are specifications for services supported by
individual devices. Profiles improve the ability of different devices
to work together.
Tip: You can find a list of supported profiles on your phone. Select MENU
➔
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Tools
Mass Storage
Settings & Tools Bluetooth Menu Options Supported Profiles.
➔
➔
➔
➔
➔
➔
USB
Your phone supports these Bluetooth profiles (see Note):
.
Headset: HSP profile supports the use of a compatible Bluetooth
headset for mono voice.
Bluetooth Menu
About Bluetooth
Handsfree: HFP profile supports Bluetooth headsets, and may
also support other installed compatible Bluetooth devices with
speakerphone capabilities, such as car kits or a conference room
devices.
Bluetooth is a short-range wireless communications technology
for exchanging information over a distance of about 30 feet
without requiring a physical connection.
You don’t need to line up the devices to send information with
Bluetooth. If the devices are in range, you can exchange
information between them, even if they are in different rooms.
Stereo: A2DP, AVRCP, GAVDP, AVDTP and AVCTP profiles support
delivery of stereo audio to a compatible Bluetooth device, such
as a headset or speakers.
Phonebook Access: PBAP profile allows sharing of your name
card and contact entries as vCards with a compatible Bluetooth
device.
Note: When using many Bluetooth headsets, you can press the multi-
function key on the headset to launch the Voice Commands tool.
Basic Imaging: BIP profile allows sending of non-protected
images for storing and printing.
112
Object Push: OPP profile allows sending and receiving of contact
name cards (vCard), calendar events (vCalendar), and other non-
protected data between devices.
Bluetooth Options
Bluetooth options allow you to view and change your phone’s
name, display supported profiles, and set visibility and pairing.
Serial Port: SPP profile allows a remote Bluetooth device to act as
a virtual serial port.
1. From the Home screen, press the Center Select Key
to select MENU
Menu
2. Press the Right Soft Key
➔
Settings & Tools
➔
Bluetooth
.
Options for these options:
• My Phone Name: Enter a custom name for your phone, visible to
other Bluetooth devices during searches.
Turning Bluetooth On or Off
Turn Bluetooth on to exchange information with a Bluetooth
device. To save battery life, or in situations where use of wireless
devices is prohibited, such as airline travel, you can turn
Bluetooth off.
• Discovery Mode: Select On for other Bluetooth devices to detect
your device, or Off for no visibility.
Note: After selecting On, your phone will be discoverable for one minute, then
Discover Mode will automatically reset to Off.
1. From the Home screen, press the Center Select Key
• Supported Profiles: View a list of supported Bluetooth profiles
and their descriptions. Highlight a profile and press View to see a
description.
to select MENU
Menu
➔
Settings & Tools
➔
Bluetooth
Turn Off
.
2. Press the Left Soft Key
Turn On or
.
• My Phone Info: View information about your phone.
• Searching Setting: Choose types of devices to search during
pairings, from All, Audio Device, PC, Phone, or Printer.
Note: When Bluetooth is turned on, the
Bluetooth On icon appears in the
annunciator line of the display.
• Auto Pairing: Choose On to allow your phone to pair with other
Bluetooth devices without entering a passkey, or Off to prevent
automatic pairing.
Settings
113
Adding a New Device
• Pairing with Passkey: Your phone sends a default passkey to the
target device. Verify that the passkey is the same on both devices.
Highlight Yes, then press OK on your phone, and follow the prompts
on the target device.
Add a new device to search for a Bluetooth device and pair with
it, to exchange information between your phone and the device.
1. From the Home screen, press the Center Select Key
6. At the prompt “Before connecting to:”, set the incoming
to select MENU
Menu
2. Use the
and press the Center Select Key
➔
Settings & Tools
➔
Bluetooth
security level for future pairings with this device:
.
• Always Ask: Your phone will prompt you to accept future pairings
from this device.
Directional Key to highlight Add New Device
OK
• Always Connect: Your phone will automatically accept future
pairing requests from this device.
.
3. At the prompt “PLACE DEVICE YOU ARE CONNECTING TO IN
DISCOVERABLE MODE,” activate the target device’s
7. Use the
and press the Right Soft Key
for this paired device:
Directional Key to highlight the new device
Options to set options
Bluetooth discoverable mode and press the Center Select
Key
OK.
• Remove Device: Remove this device from your phone’s pairing list.
4. Your phone searches for discoverable Bluetooth devices
• Rename Device: Change the name of this device in the pairing list.
and displays them.
• Incoming Security: Choose Always Ask or Always Connect for
future pairings with this device.
5. Use the
and press the Center Select Key
prompts to complete the pairing:
Directional Key to highlight the target device
• Service Discovery: View the service profiles supported for pairing
with this device.
PAIR. Follow the
• Device Info: View information about the paired device.
• Auto Pairing: If you have enabled Auto Pairing in Bluetooth
Options, and the selected device supports it, your phone sends a
default passkey to the device and pairs automatically.
114
Unlock Options
Keyguard Setting
Use Keyguard Setting to control how your phone locks the
keypad, and set preferences.
You can customize the keypress sequence to unlock your phone’s
keypad.
1. From the Home screen, press the Center Select Key
Auto Lock
to select MENU
➔
Settings & Tools
➔
Keyguard
The Auto Lock setting controls whether the external keypad locks
automatically when the backlight goes out.
Setting
➔
Unlock Options
.
1. From the Home screen, press the Center Select Key
2. Use the
Directional Key to highlight a setting, then
SET
to select MENU
➔
Settings & Tools
➔
Keyguard
press the Center Select Key
:
Setting
➔
Auto Lock
Directional Key to highlight a setting, then
SET
.
• Press Once: Unlock the keypad by pressing the Right Soft Key
once.
2. Use the
• Press Twice: Unlock the keypad by pressing the Right Soft Key
press the Center Select Key
:
, then pressing the Center Select Key
OK.
• On: Enables Keyguard. The keypad will lock when the backlight
goes out.
Sounds Settings
Use Sounds Settings to customize your phone’s sounds for
incoming calls and messages, alerts and other features.
• Off: Disables keyguard. The keypad never locks automatically.
Tip: You can always lock or unlock the keypad manually by pressing and
ᮣ
From the Home screen, press the Center Select Key
holding
.
to select MENU
Settings
➔
Settings & Tools
➔
Sounds
.
Settings
115
Easy Set-up
incoming calls. Select Caller ID + Ring to have the phone
announce the caller ID, plus play the Call Ringtone for
incoming calls. Select Name Repeat to have the phone
repeat the caller’s information for incoming calls.
Quickly set 5 Sounds settings.
1. From the Home screen, press the Center Select Key
to select MENU
Settings Easy Set-up
2. Follow the screen prompts to choose settings for Call
Sounds Keypad Volume Text Message Alert Multimedia
Message Alert, and Voicemail Message Alert
Call Sounds
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Sounds
Settings Call Sounds
➔
Settings & Tools
➔
Sounds
➔
.
Alert Sounds
Choose sounds for new message alerts, emergency tones,
missed calls, and device connection and battery charge alerts.
,
,
,
1. From the Home screen, press the Center Select Key
.
to select MENU
Settings Alert Sounds
2. Make selections for the following settings:
• TXT Message: Choose a Tone Vibrate setting and Reminder
options for incoming text messages.
• Multimedia Message: Choose a Tone
Reminder options for incoming multimedia messages.
➔
Settings & Tools
➔
Sounds
➔
.
➔
➔
,
➔
.
2. Choose Call Ringtone to select from a list of pre-loaded
ringtones, or choose Get New Ringtones to download a
ringtone application to find and download new ringtones.
,
Vibrate setting and
• Voicemail: Choose a Tone Vibrate setting and Reminder options
,
for incoming voicemail messages.
3. Choose Call Vibrate and select On to select a vibration
• Emergency Tone: Choose settings:
pattern for use with the Call Ringtone, or select Off
.
–
Alert
volume setting is Vibrate or All Sounds Off.
Vibrate Vibrates only and does not play the Emergency Dialing tone.
Off The phone will not play the Emergency Dialing tone, or vibrate.
:
Plays the Emergency Dialing tone, except when the master
4. Choose Caller ID Readout for caller ID settings, for incoming
calls for which Caller ID information is available. Select
Ring Only to have the phone play the Call Ringtone for
–
–
:
:
116
• Missed Call
:
Choose a Tone
,
Vibrate setting and Reminder
Digit Dial Readout
options for missed call alerts.
Enable or disable the readout of numbers as you dial.
• Device Connect: Choose whether a tone is played when you
connect the phone to another device with a USB cable
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Sounds
• Battery Charge Alert: Choose Alert or Vibrate to have the phone
alert you when battery charging is complete, or choose Off.
Settings Digit Dial Readout
➔
.
Keypad Sounds
2. Select On to have the phone read the numbers as you dial
Choose a tone for keypad presses.
them in the Dialer, or Off to disable readout.
1. From the Home screen, press the Center Select Key
Service Alerts
to select MENU
➔
Settings & Tools
Keypad Sounds
Directional Key to highlight Default or Lucid
SET
➔
Sounds
Enable or disable sounds your phone plays to notify you of
changes in system or service status.
Settings
➔
.
2. Use the
,
1. From the Home screen, press the Center Select Key
then press the Center Select Key
.
to select MENU
➔
Settings & Tools
➔
Sounds
Settings Service Alerts
➔
.
Keypad Volume
2. Choose On or Off for these Service Alerts:
Set the volume of tones played for keypad presses.
1. From the Home screen, press the Center Select Key
• ERI: Your phone plays a tone when you enter and exit network
coverage areas.
to select MENU
Settings Keypad Volume
2. Press the Directional Key or volume key to highlight
a volume level, Off Low Medium Low Medium Medium
High, or High, then press the Center Select Key SET
➔
Settings & Tools
➔
Sounds
• Minute Beep
:
While on a call, your phone beeps at every minute.
Your phone alerts when a call connects and ends.
➔
.
• Call Connect
:
• Software Update: Your phone plays an alert when a software
update is complete.
,
,
,
,
.
Settings
117
Power On/Off
Easy Set-Up
Control the sounds your phone plays when you power the phone
on or off.
Quickly set 8 Display settings.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
Settings Easy Set-up
2. Follow the screen prompts to choose settings for Display
Backlight Keypad Backlight Wallpaper Display Themes
Menu Layout Dial Fonts Personal Banner Clock Format, and
Home Screen Font Color
Banner
➔
Settings & Tools
➔
Display
to select MENU
➔
Settings & Tools
➔
Sounds
➔
.
Settings Power On/Off
➔
.
2. Choose On or Off to control the sounds played at Power On
,
,
,
,
and Power Off.
,
,
,
.
Display Settings
Use Display Settings to customize the appearance of your
phone’s screens.
Create a personal greeting, or network status banner to appear
on the Home screen.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Display
Settings
➔
➔
Personal Banner
.
Create a personal greeting to appear on the Home screen.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
Personal Banner
➔
Display
Settings Banner
➔
➔
.
Tip: Press and hold the Clear key
or
to erase the existing banner,
if necessary.
118
2. Enter up to 18 characters, then press the Center Select Key
Backlight
SET to save the banner.
Set the duration and brightness of the backlight for the display
and keypad.
Note: When you create a Personal Banner, it automatically appears on the
Home screen.
Tip: The backlight setting also determines how long the screen is illuminated
before locking.
ERI banner
1. From the Home screen, press the Center Select Key
Enable or disable an ERI banner to indicate network status.
to select MENU
➔
Settings & Tools
➔
Display
1. From the Home screen, press the Center Select Key
Settings Backlight
➔
.
to select MENU
➔
Settings & Tools
ERI Banner
Directional Key to highlight On or Off and
OK
➔
Display
2. Choose Display to make selections for the LCD display’s
backlight:
Settings
➔
Banner
➔
.
2. Use the
• Duration: Set the length of time the backlight is illuminated, from
press the Center Select Key
.
7 seconds 15 seconds, or 30 seconds.
,
• Brightness: Use the Directional key to adjust the brightness.
3. Choose Keypad to make selections for the keypad’s
backlight. choose from 7 Seconds
,
15 Seconds
,
30 Seconds
,
Always On or Always Off
.
Note: Prolonged backlight durations can drain your battery.
Settings
119
Lock Screen
Wallpaper
1. From the Home screen, press the Center Select Key
Select a background image for the Lock Screen and Home
screen, from pre-loaded images, or your own pictures.
to select MENU
➔
Settings & Tools
➔
Display
Home Screen
Settings
➔
Wallpaper
Directional Key to highlight Lock Screen
OK
Directional Key to highlight an option, then
then press the Center Select Key SET
.
1. From the Home screen, press the Center Select Key
2. Use the
,
to select MENU
➔
Settings & Tools
➔
Display
then press the Center Select Key
3. Use the
.
Settings
➔
Wallpaper
.
2. Use the
Directional Key to highlight Home screen
,
:
then press the Center Select Key
pictures from My Pictures.
OK to display
• Eco Wallpaper: Displays random nature images.
• None: Displays the Home screen wallpaper.
3. Use the
Directional Key to highlight a picture, then
SET to set the picture as
press the Center Select Key
wallpaper. While browsing pictures, you can choose these
options:
•
•
Press the Left Soft Key
View to see a larger image.
Press the Right Soft Key
additional images.
Get New to browse and download
120
Menu Layout
Display Themes
Customize the appearance of your phone’s menus and screens.
Choose from 3 preset main menu layouts for the Menu display.
1. From the Home screen, press the Center Select Key
Note: The default menu layout is Grid. Examples in this user manual use the
to select MENU
➔
Settings & Tools
Display Themes
Directional Key to highlight a display theme,
➔
Display
Grid layout.
Settings
➔
.
1. From the Home screen, press the Center Select Key
2. Use the
to select MENU
➔
Settings & Tools
Main Menu Settings Menu Layout
Directional Key to highlight a layout and
➔
Display
then press the Center Select Key
SET. Choose from:
Settings
➔
➔
.
• Slick Black
• Planet
2. Use the
press the Center Select Key
from:
OK to select it. Choose
• Pond
Note: While browsing themes, press the Left Soft Key
Preview to see an
• Tab: Displays menu icons on tabs, so you can use the Directional
Keys to scroll right and left through the menus.
example of the highlighted theme, or press the Right Soft Key
Help for information about the highlighted theme.
• List: Displays menu items in a list, so you can use the Directional
Keys to scroll up and down through the menus.
Main Menu Settings
• Grid: (Default) Displays menu items in a grid, so you can use the
Directional Keys to scroll up, down, right or left through the menus.
Customize the features and applications available on the Main
Menu.
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Display
Settings Main Menu Settings
➔
➔
➔
.
Settings
121
Replace Menu Items (List Menu Layout only)
Position Menu Items (List Menu Layout only)
When you have the Menu Layout set to List, you can customize
the Menu by replacing some icons with your favorite applications
or tools.
When you have the Menu Layout set to List, you can change the
location of the menu items on the menu display.
1. From the Home screen, press the Center Select Key
to select MENU
Settings Main Menu Settings
2. A list menu items displays. Use the
to highlight an item to move to another location, then press
the Center Select Key MOVE
3. Use the Directional Key to select another icon, then
press the Center Select Key SET
➔
Settings & Tools
Position Menu Items
Directional Key
➔
Display
Note: Some Menu items, such as Settings & Tools and Contacts, cannot be
replaced.
➔
➔
.
1. From the Home screen, press the Center Select Key
to select MENU
Settings Main Menu Settings
2. A list of menu items displays. Use the
➔
Settings & Tools
➔
Display
.
➔
➔
Replace Menu Items
.
Directional Key
.
to highlight an item to replace and press the Center Select
4. Press Done to save the new positions.
Key
EDIT
.
Reset Menu Settings
3. Use the
Directional Key to highlight a new menu item
SET
from the list and press
.
Reset Menu layout, items and positions to the default settings.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
Main Menu Settings Reset Menu Settings
Directional Key to highlight an option, then
OK
➔
Display
Settings
➔
➔
.
2. Use the
press the Center Select Key
:
122
Menu Fonts
• Menu Layout: When Menu Layout is set to List or Tab, resets the
Menu Layout to the default layout, Grid.
Set the style and size of fonts in the Menu.
• Menu Items: When Menu Layout is set to List, resets the list of
menu items to the default list.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
Menu Fonts
Directional Key to highlight a font attribute,
OK
Rose Marie, or Cool Jazz. then press the
Set
• Size: Select Normal or Large, then press
➔
Display
• Item Positions: When Menu Layout is set to List, resets the order
of menu list items.
Settings
➔
Fonts
➔
.
• All
:
When Menu Layout is set to List, resets all menu items and
2. Use the
positions to their default setting(s).
then press the Center Select Key
.
Fonts
• Style: Select VZW Font
Center Select Key
,
Dial Fonts
.
Set the style and size of fonts in the Dialer.
SET
.
1. From the Home screen, press the Center Select Key
Tip: Press the Left Soft Key
font attributes, then make your selection by pressing the Center Select
Key SET
Preview to scroll through examples of the
to select MENU
➔
Settings & Tools
Dial Fonts
Directional Key to highlight a font attribute,
OK
Rose Marie, or Cool Jazz. then press the
SET
• Size: Select Normal or Large Only, then press
➔
Display
.
Settings
➔
Fonts
➔
.
2. Use the
then press the Center Select Key
:
• Style: Select VZW Font
,
Center Select Key
.
SET.
Tip: Press the Left Soft Key
font attributes, then make your selection by pressing the Center Select
Key SET
Preview to scroll through examples of the
.
Settings
123
Messaging Font Size
Clock Format
Set the size of text in messages.
Select the format for the clock displayed on the Home screen.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
Messaging Font Size
Directional Key to highlight a Normal or
SET
➔
Display
to select MENU
➔
Settings & Tools
➔
Display
Settings
➔
Fonts
➔
.
Settings
➔
Clock Format
Directional Key to highlight a format and
SET. Choose from Analog
Digital 12 (hour), Large Digital 12 (hour),
Digital 24 (hour), Large Digital 24 (hour), or Off
.
2. Use the
2. Use the
Large, then press the Center Select Key
.
press the Center Select Key
Large Analog
,
,
Tip: Press the Left Soft Key
font attributes, then make your selection by pressing the Center Select
Key SET
Preview to scroll through examples of the
.
.
Tip: Press the Left Soft Key
Preview to scroll through examples of the
SET
clock formats, then make your selection by pressing
.
124
Home Screen Font Color
Airplane Mode
Choose font colors for Personal Banner, ERI Banner and Clock.
When Airplane Mode is set to On, all wireless functions of your
phone are disabled, and you cannot send or receive calls or
messages. While in Airplane Mode, you can use other features of
your phone, such as Calendar or Games.
1. From the Home screen, press the Center Select Key
to select MENU
Settings Home Screen Font Color
2. Select Personal Banner ERI Banner, or Clock, then press the
Center Select Key OK
3. Choose a color from the list of colors, then press the
➔
Settings & Tools
➔
Display
➔
.
1. From the Home screen, press the Center Select Key
,
to select MENU
Airplane Mode.
2. Select On to activate Airplane Mode, or Off to deactivate
Airplane Mode, then press the Center Select Key SET
➔
Settings & Tools
➔
Phone Settings
.
➔
Center Select Key
SET.
.
Phone Settings
Set Shortcuts
Choose settings for the phone’s behavior.
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Phone Settings.
Customize My Shortcuts and Directional Key shortcuts, for easy
access to your favorite applications or menus.
ᮣ
➔
➔
Settings
125
Set My Shortcuts
Set Directional Keys
From the Home screen, press the
Directional Key Right to
From the Home screen, you can press the
Directional Key
access My Shortcuts. For more information, see “Directional
to access your favorite featues. For more information, see
Keys” on page 20.
“Directional Keys” on page 20.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
Set My Shortcuts
➔
Phone Settings
to select MENU
➔
Settings & Tools
Set Directional Keys
➔
Phone Settings
➔
Set Shortcuts
➔
.
➔
Set Shortcuts
➔
.
Tip: You can also set shortcuts from My Shortcuts. From the Home screen,
Tip: To set directional keys right from the Home screen, press the Directional
press the Directional Key Right to launch My Shortcuts, then press the
Key Right to launch My Shortcuts, then press the Left Soft Key
Left Soft Key
Settings
.
Settings to select Set Directional Keys.
2. Use the
Directional Key to highlight Shortcut 1
,
2. Use the
Key LEFT Directional Key, or DOWN Directional Key then
press the Center Select Key SET
3. Use the Directional Key to highlight an item, then
press the Center Select Key OK to set the shortcut.
4. To reset a directional key shortcut, highlight the shortcut,
then press the Right Soft Key Options, to select
Directional Key to highlight UP Directional
Shortcut 2
,
Shortcut 3 or Shortcut 4 then press
SET
.
,
.
3. Use the
Directional Key to highlight an item, then
press the Center Select Key
OK to set the shortcut.
4. To reset shortcut(s), highlight the shortcut, then press the
Right Soft Key Options for these options:
• Reset Shortcut: Resets the highlighted shortcut.
Reset <xx> Key and press the Center Select Key
OK.
• Reset My Shortcuts: Resets all shortcuts.
To reset all shortcuts, press the Right Soft Key
Options
➔
Reset Directional Keys and press
OK.
126
Voice Commands Settings
QWERTY Action
Configure the Voice Commands feature of your phone. You can
also access Voice Command settings from Voice Commands. For
more information, see “Voice Commands” on page 37.
Choose how the phone reacts when you open the QWERTY
keyboard and begin entering text at the Home screen.
1. From the Home screen, press the Center Select Key
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Phone Settings
➔Voice Command Settings
Language
to select MENU
➔
Settings & Tools
➔
Phone Settings
➔
➔
➔
QWERTY Action.
.
2. Use the
Directional Key to highlight a launch action,
OK. Options include:
then press the Center Select Key
• Off: No action is taken.
Choose the language for the phone’s operation and displays.
1. From the Home screen, press the Center Select Key
• TXT Message: Creates a new text message.
• Contacts: Opens Contacts to find a contact.
• Notepad: Launches Notepad to create a new note.
to select MENU
Language
2. Use the
➔
Settings & Tools
➔
Phone Settings
➔
.
Location
Directional Key to highlight a language, then
Choose whether your phone’s GPS (Global Positioning System)
location is available to the network at all times, or only when
you’ve dialed an Emergency Number, such as 911.
press the Center Select Key
OK:
• English
• Español
Note: Location service is required by some applications on your phone, and
is only available on the Verizon Wireless network. It is not available
when roaming.
Settings
127
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Phone Settings
Location
2. Use the
press the Center Select Key
Note: Access to all Security settings requires the phone lock code. By default
➔
➔
the Lock Code is the last four digits of your phone number.
➔
.
Important!: For security reasons, your phone does not display lock codes. If
you change the lock code, be sure to record the new code for
future reference.
Directional Key to highlight a setting, then
OK
:
• Location On: GPS location is on wherever the feature is available.
Edit Codes
• E911 Only: GPS location setting turns on only when you dial 911.
Set a new Phone Only Lock Code (for locking and unlocking the
phone) or Calls & Services Lock Code (for restricting access to
calls and services).
Current Country
Select your current location.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Phone Settings
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
➔
Current Country.
➔
.
2. Use the
Directional Key to highlight a country, then
OK
2. Enter the Phone Only Lock Code at the prompt. The default
press the Center Select Key
.
lock code is the last four digits of your phone number, or
you can set a custom lock code under Phone Settings
Security Edit Codes
3. Choose Edit Codes, then use the
➔
Security
➔
.
Lock your phone, set restrictions, and other security options.
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Phone Settings
Security
Directional Key to
ᮣ
highlight a code and press the Center Select Key
OK:
➔
➔
➔
.
• Phone Only: Enter a new lock code at the prompt, then enter the
new code again to confirm the change.
128
• Calls & Services: Enter a new lock code at the prompt, then enter
• Unlock Setting: Changes are permitted to the Location Setting.
the new code again to confirm the change.
• Lock Setting: You must enter the Calls and Service Code to make
changes to the Location Setting.
Restrictions
6. Use the
Directional Key to highlight Calls to set
Set restrictions for receiving calls or messages.
restrictions for calls, then press the Center Select Key
1. From the Home screen, press the Center Select Key
SET
:
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
• Incoming Calls: Choose Allow All to allow all incoming calls.
Choose Choose Block All to block all incoming calls.
➔
.
2. Enter the Phone Only Lock Code at the prompt. The default
• Outgoing Calls: Choose Allow All to allow dialing of any phone
number. Choose Block All to block all dialing.
lock code is the last four digits of your phone number, or
you can set a custom lock code under Phone Settings
➔
7. Use the
Directional Key to highlight Messages to set
Security
➔
Edit Codes
Directional Key to highlight Restrictions, then
SET
.
restrictions for messages, then press the Center Select
Key
SET:
3. Use the
press the Center Select Key
.
• Incoming Messages: Choose Allow All to allow all incoming
messages. Choose Block All to block all incoming messages.
4. Enter the Calls and Services Code at the prompt. The
• Outgoing Messages: Choose Allow All to allow sending of all
messages. Choose Block All to block sending of all messages.
default code is the last four digits of your phone number, or
you can set a custom lock code under Phone Settings
➔
Security
➔
Edit Codes
.
5. Use the
Directional Key to highlight Location Setting
,
then press the Center Select Key
options:
SET to set these
Settings
129
Phone Lock Setting
Lock Phone Now
Set the locking behavior of your phone. When the phone is
locked, you must enter the lock code to use it, except when
dialing emergency numbers.
You can manually lock your phone, to prevent access until you
unlock it with the Phone Only Lock Code. This is a one-time lock;
your phone returns to its Phone Lock Setting after you unlock it.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
➔
.
➔
.
2. Enter the Phone Only Lock Code at the prompt. The default
2. Enter the Phone Only Lock Code at the prompt. The default
lock code is the last four digits of your phone number, or
lock code is the last four digits of your phone number, or
you can set a custom lock code under Phone Settings
Security Edit Codes
3. Choose Phone Lock Setting, then use the
➔
you can set a custom lock code under Phone Settings
Security Edit Codes
➔
➔
.
➔
.
Directional
3. Select Lock Phone Now. The phone locks and returns to the
Home screen. To unlock the phone, press Unlock and enter
the Lock Code.
Key to highlight a setting and press the Center Select Key
OK
:
• Unlocked: The phone is unlocked at all times.
• On Power Up: The phone is automatically locked when you power
it on. You can make phone calls, but must enter the lock code to
access other features.
130
Restore Phone
System Select
Return all phone settings to the factory defaults and permanently
erase all user data.
Set system selections for roaming. For more information, refer to
“Roaming” on page 12.
1. From the Home screen, press the Center Select Key
Warning!: Choosing Restore Phone will return your phone to the default
settings and permanently erase all your entries and information,
including pictures, videos, music, messages, contacts and
downloaded applications.
to select MENU
➔
Settings & Tools
➔
Phone Settings
➔
System Select.
2. Use the
Directional Key to highlight a setting, then
SET
1. From the Home screen, press the Center Select Key
press the Center Select Key
:
to select MENU
Security
➔
Settings & Tools
➔
Phone Settings
• Home Only: Your phone is only active in your home network’s
coverage area. When outside the coverage area, your phone will
not roam, and call functions and other features will not be available.
➔
.
2. Enter the Phone Only Lock Code at the prompt. The default
• Automatic-A: Your phone automatically acquires service based on
default settings, using the Verizon Wireless network and the
networks of roaming partners.
lock code is the last four digits of your phone number, or
you can set a custom lock code under Phone Settings
Security Edit Codes
3. Choose Restore Phone. At the prompt, use the
Directional Key to highlight Yes and press the Center
Select Key OK to restore default settings.The phone
powers off, then back on.
➔
➔
.
• Automatic-B: Your phone automatically acquires service based on
default settings, using the Verizon Wireless network and the
networks of roaming partners.
Note: After the phone powers on, you must dial *228, then press
connect with the network and program your phone with default
network settings.
to
Settings
131
NAM Select
Quick Search
Set the primary NAM (Number Assignment Module).
Quick Search allows easy searching for contacts and menus from
QWERTY keyboard.
1. From the Home screen, press the Center Select Key
to select MENU
NAM Select
2. Use the
press the Center Select Key
• NAM Select: Choose NAM1 or NAM2.
➔
Settings & Tools
➔
Phone Settings
➔
.
Note: For more information about using Quick Search to search for contacts,
see “Finding a Contact using Quick Search” on page 49.
Directional Key to highlight a selection, then
OK
:
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Phone Settings
• Auto NAM Select: Choose Enable to set automatic NAM selection,
or Disable to use the NAM Select setting.
➔
Quick Search
.
2. Use the
Directional Key to highlight On to enable
Quick Search, or Off to disable it, then press the Center
Select Key SET
.
Tip: Press Info to display information about using Quick Search
.
132
Using Quick Search
Call Settings
Customize settings related to placing and receiving calls.
Note: The Quick Search setting must be set to On to use Quick Search.
Answer Options
1. With the phone closed, press the keypad keys
corresponding to the first three characters of the name of
the item.
Select a method for answering incoming calls.
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Call Settings
➔
Answer Options
.
Example: For example, to search for “Inbox”, press
Directional Key
.
2. Use the
Directional Key to highlight option(s) and
2. Press the
:
press the Center Select Key
selection:
MARK to mark them for
• Down to search for Menu items
• Up to search for Contact entries.
• Slide Open: Answer incoming calls by sliding the phone open.
3. If match(es) are found, the item(s) appear in the display.
4. Press the Directional Key to highlight an item, then
press the Center Select Key OK to launch it.
• Any Key: When the phone is open, answer calls by pressing any
key on the QWERTY keyboard.
• Auto w/ Handsfree: Calls are answered automatically with a 5-
second delay.
3. Press Done to save your selections.
Settings
133
Auto Retry
3. On the TTY MODE screen, use the
Directional Key to
highlight a TTY mode and press the Center Select Key
Select settings for automatic redialing of unanswered calls after
a set period of time.
SET to select it:
1. From the Home screen, press the Center Select Key
• TTY Full
to select MENU
Auto Retry
2. Use the
Seconds
➔
Settings & Tools
➔
Call Settings
➔
• TTY + Talk (VCO)
• TTY + Hear (HCO)
• TTY Off
.
Directional Key to highlight 10 Seconds
60 Seconds, or Off, then press the Center Select
SET
,
30
One Touch Dial
,
Enable or disable the speed dialing feature. For more information
Key
.
about using speed dials, see “Speed Dials” on page 51.
TTY Mode
1. From the Home screen, press the Center Select Key
Your phone is fully TTY-compatible, allowing you to connect a
TTY device to the phone’s headset jack. Before you can use your
phone with a TTY device, you’ll need to enable TTY Mode.
to select MENU
One Touch Dial
2. Use the
touch dialing, or Off to disable, then press the Center
Select Key SET
➔
Settings & Tools
➔
Call Settings
➔
.
Directional Key to highlight On to enable one
Enabling TTY Mode
1. From the Home screen, press the Center Select Key
.
to select MENU
TTY Mode
2. At the prompt “Enabling TTY will disable handset audio.
➔
Settings & Tools
➔
Call Settings
➔
.
Continue?”, use the
Directional Key to highlight Yes
OK
and the Center Select Key
.
134
Voice Privacy
Data Settings
Select a port for connecting the phone to a PC, and set
connection speed.
Note: This feature is only available on the Verizon Wireless network.
1. From the Home screen, press the Center Select Key
Enable or disable encryption of voice signals for enhanced
privacy.
to select MENU
Data Settings
2. Configure these data settings:
➔
Settings & Tools
➔
Call Settings
➔
1. From the Home screen, press the Center Select Key
.
to select MENU
Voice Privacy
2. Use the
Voice Privacy, or Off to disable, then press the Center
Select Key SET
➔
Settings & Tools
➔
Call Settings
➔
.
• Select Port: Choose USB to allow connections via the USB port,
Bluetooth to allow connections via Bluetooth, or NULL to allow no
Directional Key to highlight On to enable
connections. Press SET to save the setting.
• Port Speed: Choose a speed, from Auto
,
19200
,
38400
,
57600
,
.
115200, or 230400. Press SET to save the setting
DTMF Tones
Set DTMF tone length. DTMF tones are used as input by some
automated phone systems, where you may need to transmit
DTMF tones from your phone to make selections.
1. From the Home screen, press the Center Select Key
to select MENU
DTMF Tones
2. Use the
then press the Center Select Key
➔
Settings & Tools
➔
Call Settings
➔
.
Directional Key to highlight Normal or Long
,
SET
.
Settings
135
Assisted Dialing
Memory
Assisted Dialing allows easy dialing of international calls while
roaming in another country.
Manage memory settings for saving pictures, videos, music,
sounds and ringtones to your phone’s memory and optional
microSD memory card.
Tip: Press the Right Soft Key
Help for info about Assisted Dialing.
Note: Your phone does include a microSD™ memory card. You can purchase
a microSD card as an accessory. Consult your service provider for
more information.
1. From the Home screen, press the Center Select Key
to select MENU Settings & Tools Call Settings
Assisted Dialing
2. Use the Directional Key to highlight On to enable or
Off to disable, then press the Center Select Key SET
3. Use the Directional Key to move to the Reference
Country field, then press the Left Soft Key Set
4. Use the Directional Key to highlight a country, then
press the Center Select Key OK to select it.
➔
➔
➔
ᮣ
From the Home screen, press the Center Select Key
to select MENU Settings & Tools Memory.
.
➔
➔
.
Save Options
Choose the default location for pictures and sounds.
.
1. From the Home screen, press the Center Select Key
to select MENU
Save Options
2. Use the
press OK. Choose Phone Memory or optional Card Memory
then press the Center Select Key SET
3. Use the Directional Key to highlight Sounds and
press the Center Select Key OK. Choose Phone
Memory or optional Card Memory, then press SET
➔
Settings & Tools
➔
Memory
➔
.
Directional Key to highlight Pictures and
Tip: Highlight a country and press the Left Soft Key
edit the Country Code IDD Prefix NDD Prefix Area/City Code, and
National Number Length
Details to view and
,
,
,
,
.
.
5. Press the Center Select Key
OK to save.
Note: When Assisted Dialing is On, the Home screen displays “Assisted On
”
.
when dialing an international number.
136
Phone Memory
Card Memory
View usage statistics for the phone’s internal memory.
View usage statistics for an optional installed microSD memory
card. This menu will only appear if a memory card is installed.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
Phone Memory
2. Use the
➔
Settings & Tools
➔
Memory
➔
to select MENU
Card Memory
2. Use the
press the Center Select Key
➔
Settings & Tools
➔
Memory
➔
.
.
Directional Key to highlight a setting, then
Directional Key to highlight a setting, then
OK to view statistics:
press the Center Select Key
for these items:
OK to view the statistics
• Card Memory Usage: Available, Used and Total memory, and
current memory usage for My Pictures, My Ringtones, My Music,
My Sounds, and My Contacts.
• Phone Memory Usage: Available, Used and Total memory, and
current memory usage for My Pictures, My Ringtones, My Music,
My Sounds, Applications, and Multimedia Msg.
• My Pictures: Pictures saved from a Picture message, downloaded
via Media Center, or taken using Camera.
• My Pictures: Pictures saved from a Picture message, downloaded
via Media Center, or taken using Camera.
• My Ringtones: Ringtones downloaded via Media Center.
• My Ringtones: Ringtones downloaded via Media Center.
• My Music: Music you have saved or downloaded, or transferred
from your PC using Sync Music.
• My Music: Music you have saved or downloaded, or transferred
from your PC using Sync Music.
• My Sounds: Sounds you have saved, downloaded, or recorded
using your phone.
• My Sounds: Sounds you have saved, downloaded, or recorded
using your phone.
• My Contacts: Contacts entries save on your phone.
• My Contacts: Contacts entries save on your phone.
• Move All To Phone: Move all movable files from the memory card
to the phone’s memory.
• Move All To Card: If an optional memory card is installed, move all
movable files from the phone’s memory to the memory card.
• FormatCard: Erase all files from an installed card and prepare it for
use with your phone.
Settings
137
Phone Info
Set-up Wizard
View software and hardware information for your phone, your
assigned telephone number, an icon glossary, and manage
software updates.
Set preferences for four basic categories, to start using your
phone quickly.
1. From the Home screen, press the Center Select Key
1. From the Home screen, press the Center Select Key
to select MENU
➔
Settings & Tools
➔
Set-up Wizard.
to select MENU
➔
Settings & Tools
➔
Phone Info.
2. Follow the prompts to set preferences for these settings:
2. Use the Directional Key to highlight My Number, then
• Call Sounds: Choose how your phone alerts you to incoming calls.
• Display Themes: Select a theme for your phone’s displays.
• Menu Layout: Choose a layout for the Main menu.
press the Center Select Key
OK to display the Mobile
Device and Identification numbers.
3. Use the
Directional Key to highlight SW / HW Version
,
• Clock Format: Select a format for the clock displayed on the Home
screen.
then press the Center Select Key
OK to view the
Press the Center Select Key
and move to the next setting.
Press the Left Soft Key
SET to make a selection
phone’s software version, PRL, ERI, Browser, Media Center,
MSUI, Hardware, ESN, MEID, and WDC.
Preview or Play for an
4. Use the
then ppress the Center Select Key
used on the phone, with brief descriptions.
5. Use the Directional Key to highlight Software Update
then press the Center Select Key OK to check the
Directional Key to highlight Icon Glossary
,
example of the highlighted selection.
OK to view icons
Press the Right Soft Key
Skip to move to the next
setting without making a selection.
,
status of your phone’s software and to check for new
software updates.
138
Section 13: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
Health and Safety Information
139
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
Please Note the Following Information When
Using Your Handset
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
1. WARNING REGARDING DISPLAY
The display on your handset is made of glass or acrylic and
could break if your handset is dropped or if it receives
significant impact. Do not use if screen is broken or
cracked as this could cause injury to you.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
•
•
Head: 1.04 W/Kg.
2. WARRANTY DISCLAIMER: PROPER USE OF A TOUCH SCREEN
HANDSET
Body-worn: 0.87W/Kg.
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
If your handset has a touchscreen display, please note that
a touchscreen responds best to a light touch from the pad
of your finger or a non-metallic stylus. Using excessive
force or a metallic object when pressing on the
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
phone. Additional product specific SAR information can also be
touchscreen may damage the tempered glass surface and
void the warranty. For more information, please refer to the
“Standard Limited Warranty” on page page 160.
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
140
1-800-822-8837 for more information.
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
UL Certified Travel Adapter
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
Health and Safety Information
141
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
•
•
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What is FDA's role concerning the safety of wireless
phones?
•
•
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
Federal Communications Commission
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
142
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
people use wireless phones, so we don't know with certainty
what the results of such studies mean for human health.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
What are the results of the research done already?
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years.
However, many of the studies that showed increased tumor
development used animals that had been genetically engineered
or treated with cancer-causing chemicals so as to be pre-
disposed to develop cancer in absence of RF exposure. Other
studies exposed the animals to RF for up to 22 hours per day.
These conditions are not similar to the conditions under which
However, very large numbers of animals would be needed to
provide reliable proof of a cancer promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-
up may be needed to provide answers about some health effects,
such as cancer.
Health and Safety Information
143
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
questions about the effects of exposure to radio frequency
energy (RF). FDA has been a leading participant in the World
Health Organization international Electromagnetic Fields (EMF)
Project since its inception in 1996.
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF).
Since time is a key factor in how much exposure a person
receives, reducing the amount of time spent using a wireless
phone will reduce RF exposure.
An influential result of this work has been the development of a
detailed agenda of research needs that has driven the
establishment of new research programs around the world. The
Project has also helped develop a series of public information
documents on EMF issues.
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
144
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
Health and Safety Information
145
Studies have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
What about wireless phone interference with
medical equipment?
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 1/1/2010):
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
•
•
•
•
•
FCC RF Safety Program:
Environmental Protection Agency (EPA):
Occupational Safety and Health Administration's (OSHA):
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
146
•
•
•
International Commission on Non-Ionizing Radiation Protection:
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
Health Protection Agency:
US Food and Drug Administration:
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
http://www.fda.gov/Radiation-EmittingProducts/
HomeBusinessandEntertainment/CellPhones/default.htm
Road Safety
inconvenient time, let your voice mail answer it for you.
Your wireless phone gives you the powerful ability to
4. Let the person you are speaking with know you are driving.
Suspend the call in heavy traffic or hazardous weather
conditions. Rain, sleet, snow, ice and even heavy traffic
can be hazardous.
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold. Always comply with
road safety regulations on using a mobile phone while driving.
Using a mobile phone while driving can be dangerous.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Health and Safety Information
147
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call, dial only a few numbers, check the road and
your mirrors, then continue.
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
"The wireless industry reminds you to use your phone safely when
driving."
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
For more information, please call 1-888-901-SAFE, or visit our
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations. Prolonged exposure to
loud sounds (including music) is the most common cause of
preventable hearing loss. Some scientific research suggests that
using portable audio devices, such as portable music players and
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
148
cellular telephones, at high volume settings for long durations
may lead to permanent noise-induced hearing loss. This includes
the use of headphones (including headsets, earbuds, and
Bluetooth or other wireless devices). Exposure to very loud sound
has also been associated in some studies with tinnitus (a ringing
in the ear), hypersensitivity to sound and distorted hearing.
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You should follow some commonsense recommendations when
using any portable audio device:
You can obtain additional information on this subject from the
following sources:
•
•
•
Always turn the volume down before plugging the earphones into an
audio source.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
Voice: (800) 222-2336
Email: [email protected]
Internet: http://www.audiology.org
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
Health and Safety Information
149
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Bethesda, MD 20892-2320
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
Suite 9200
Patriots Plaza Building
Washington, DC 20201
UsingYourPhoneNearOtherElectronicDevices
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
Implantable Medical Devices
Internet: http://www.cdc.gov
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
1-888-232-6348 TTY
150
Persons who have such devices:
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
•
•
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
For more information see:
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
Health and Safety Information
151
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together.
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
T3
+
T2
=
5
M3
+
M2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
152
Vehicles
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Emergency Calls
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions areas or circumstances. Therefore, you should never
rely solely on any wireless phone for essential communications
(medical emergencies, for example). Before traveling in remote
or underdeveloped areas, plan an alternate method of contacting
emergency services personnel.
Posted Facilities
Switch your phone off in any facility where posted notices require
you to do so.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
To make an emergency call:
1. If the phone is not on, switch it on.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
3. Press the
key.
Health and Safety Information
153
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
Quincy, Massachusetts
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
USA 02169-7471
Internet: http://www.nfpa.org
Cautions
Restricting Children's access to your Phone
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Your phone is not a toy. Do not allow children to play with it
because they could hurt themselves and others, damage the
phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
154
Other Important Safety Information
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
Product Performance
Getting the Most Out of Your Signal Reception
•
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
•
•
•
•
Ensure that any mobile phones or related equipment installed in your
vehicle are securely mounted.
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If you're inside a building, being near a window may give you
better reception.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
Understanding the Power Save Feature
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment near or in the area over the air bag or
in the air bag deployment area. If wireless equipment is improperly
installed and the air bag inflates, serious injury could result.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Understanding How Your Phone Operates
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Health and Safety Information
155
Maintaining Your Phone's Peak Performance
not touch gold-colored contacts or terminals with your fingers or metal
objects (if dirty, wipe the card with a soft cloth).
For the best care of your phone, only authorized personnel should
service your phone and accessories. Allowing unqualified
personnel to service your phone may result in damage to your
phone and may void the warranty.
•
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Availability of Various Features/Ring Tones
There are several simple guidelines to operating your phone
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call. For more information, see
“Turning Bluetooth On or Off” on page 113.
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
Battery Standby and Talk Time
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Speak directly into the phone's receiver.
If your phone has a SIM or memory card: (i) handle the SIM or memory
card with care, (ii) do not remove a card while the phone is transferring
or accessing information, as this could result in loss of data and/or
damage to the card of phone, (iii) protect cards from strong shocks,
static electricity, and electrical noise from other devices, and (iv) do
Battery Precautions
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
Never use any charger or battery that is damaged in any way.
156
•
•
Do not modify or remanufacture the battery as this could result in
serious safety hazards. Use batteries only for their intended use.
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage serious injuries, damage to your phone, or other
serious hazard.
•
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
Do not leave the battery in hot or cold places, (below 0 °C (32 °F) or
over 45 °C (113 °F) such as in a car in summer or winter conditions, as
you will reduce the charging capacity and lifetime of the battery.
Always try to keep the battery at room temperature. A phone with a
hot or cold battery may temporarily not work, even when the battery is
fully charged. Li-ion batteries are particularly affected by temperatures
below
•
•
If left unused, a fully charged battery will discharge itself over time and
must be recharged before use.
0 °C (32 °F).
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers which are specifically designed for
your phone. When a charger is not in use, disconnect it from the power
source. Do not leave the battery connected to a charger for more than
a week, since overcharging may shorten its life.
•
•
Do not place the battery in, on or near areas that may get very hot,
such as on or near a microwave oven, cooking surface, cooking
appliance, iron, or radiator. Batteries may explode when overheated.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
Health and Safety Information
157
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
•
•
•
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
•
•
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
Do not store the phone in hot areas (over 45 °C (113 °F)). High
temperatures can shorten the life of electronic devices, damage
batteries, and warp or melt certain plastics.
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
Do not store the phone in cold areas (below 0 °C (32 °F)). When the
phone warms up to its normal operating temperature, moisture can
form inside the phone, which may damage the phone's electronic
circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. Do not handle a damaged or leaking Lithium Ion (Li-Ion)
battery. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Care and Maintenance
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Do not put the phone in or near areas that may get very hot devices,
such as a microwave oven, cooking surface, iron or a radiator. Do not
dispose of the phone in a fire. The phone may explode when
overheated.
•
Keep the phone and all its parts and accessories out of the reach of
small children.
158
•
•
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Dispose of phones in accordance with local regulations. In some areas,
the disposal of phones in household or business trash may be
prohibited. For safe disposal options for phones, contact your nearest
Samsung authorized service center.
Health and Safety Information
159
Section 14: Warranty Information
Standard Limited Warranty
items, including framing, and any non-operative parts unless caused by
SAMSUNG;
What is Covered and For How Long?
(b) defects or damage resulting from excessive force or use of a metallic
object when pressing on a touch screen; (c) equipment that has the
serial number or the enhancement data code removed, defaced,
damaged, altered or made illegible; (d) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to normal
use; (e) malfunctions resulting from the use of Product in conjunction or
connection with accessories, products, or ancillary/peripheral equipment
not furnished or approved by SAMSUNG; (f) defects or damage from
improper testing, operation, maintenance, installation, service, or
adjustment not furnished or approved by SAMSUNG; (g) defects or
damage from external causes such as collision with an object, or from
fire, flooding, sand, dirt, windstorm, lightning, earthquake, or from
exposure to weather conditions, or battery leakage, theft, blown fuse, or
improper use of any electrical source; (h) defects or damage caused by
cellular signal reception or transmission, or viruses or other software
problems introduced into the Product; (j) any other acts which are not
the fault of SAMSUNG; or (i) Product used or purchased outside the
United States. This Limited Warranty covers batteries only if battery
capacity falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has been
charged by a battery charger not specified or approved by SAMSUNG for
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon proper
use of Product by Purchaser. This Limited Warranty does not cover: (a)
defects or damage resulting from accident, misuse, abnormal use,
abnormal conditions, improper storage, exposure to moisture or
dampness, neglect, unusual physical, electrical or electromechanical
stress, or defects in appearance, cosmetic, decorative or structural
160
charging the battery, (ii) any of the seals on the battery are broken or
show evidence of tampering, or (iii) the battery has been used in
equipment other than the SAMSUNG phone for which it is specified.
replaced parts, components, boards and equipment shall
become the property of SAMSUNG. If SAMSUNG determines that
any Product is not covered by this Limited Warranty, Purchaser
must pay all parts, shipping, and labor charges for the repair or
return of such Product.
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the original date of purchase, the serial number of
Product and the sellers' name and address. To obtain assistance
on where to deliver the Product, call Samsung Customer Care at
1-888-987-4357. Upon receipt, SAMSUNG will promptly repair
or replace the defective Product. SAMSUNG may, at SAMSUNG's
sole option, use rebuilt, reconditioned, or new parts or
components when repairing any Product or replace Product with
a rebuilt, reconditioned or new Product. Repaired/replaced cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
What Are The Limits On Samsung's Warranty/liability? EXCEPT AS
SET FORTH IN THE EXPRESS WARRANTY CONTAINED HEREIN,
PURCHASER TAKES THE PRODUCT "AS IS," AND SAMSUNG MAKES NO
WARRANTY OR REPRESENTATION AND THERE ARE NO CONDITIONS,
EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE, OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT
LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
Warranty Information
161
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION OF
LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE
HEREBY LIMITED TO THE SAME DURATION OF TIME AS THE EXPRESS
WRITTEN WARRANTY STATED HEREIN. SOME STATES DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS, SO THE
ABOVE LIMITATION MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG
SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING
FROM THE PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE OR
LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF THE
EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF ANTICIPATED
PROFITS OR BENEFITS, OR FOR DAMAGES ARISING FROM ANY TORT
(INCLUDING NEGLIGENCE OR GROSS NEGLIGENCE) OR FAULT
COMMITTED BY SAMSUNG, ITS AGENTS OR EMPLOYEES, OR FOR ANY
BREACH OF CONTRACT OR FOR ANY CLAIM BROUGHT AGAINST
PURCHASER BY ANY OTHER PARTY. SOME STATES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY
TO YOU.
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S
EXCLUSIVE REMEDY. IF ANY PORTION OF THIS LIMITED WARRANTY IS
HELD ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH
PARTIAL ILLEGALITY OR UNENFORCEABILITY SHALL NOT AFFECT THE
ENFORCEABILITY FOR THE REMAINDER OF THIS LIMITED WARRANTY
WHICH PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW
PERMITS.
THE PARTIES UNDERSTAND THAT THE PURCHASER MAY USE THIRD-
PARTY SOFTWARE OR EQUIPMENT IN CONJUNCTION WITH THE
PRODUCT. SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS
AND THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRD-PARTY SOFTWARE OR
EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT
IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY SAMSUNG OR
OTHERWISE, INCLUDING THE ABILITY TO INTEGRATE ANY SUCH
SOFTWARE OR EQUIPMENT WITH THE PRODUCT. THE QUALITY,
CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY OF ANY
SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE
PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. THIS
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing reflects this
allocation of risk and the limitations of liability contained in this Limited
162
Warranty. The agents, employees, distributors, and dealers of SAMSUNG
are not authorized to make modifications to this Limited Warranty, or
make additional warranties binding on SAMSUNG. Accordingly,
additional statements such as dealer advertising or presentation,
whether oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
Samsung Telecommunications America, LLC
1301 E. Lookout Drive
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG
Phone: 1-888-987-HELP (4357)
©2010 Samsung Telecommunications America, LLC. All rights reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change without
notice. [021710]
End User License Agreement for Software
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
Warranty Information
163
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
164
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
Warranty Information
165
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
166
Open Source Announcement
Some software components of this product incorporate source
code covered under the BSD and RSA Data Security.
Component
Open BSD
License
BSD 1.0
And this product includes software developed by the University of
California, Berkeley and its contributors.
TheFreeTypeProject-freetype2 The FreeType Project License
libjpeg JPEG License
And the software was developed by the University of California,
Berkeley,
MD4Message-DigestAlgorithm RSA Data Security
/ MD5 message-Digest
Algorithm
©
And portions of this software are copyright 1996-2008 The Free
Type Project.
Common L4
BSD 2-Clause License
Australian Public Licence B
(OZPLB) Version 1-0
And this software is based in part on the work of the Independent
JPEG Group.
And this product includes software developed by the OpenSSL
OpenSSL
Open SSL License
SSLeay License
SSL implementation by Eric
Young
And this product includes cryptographic software written by Eric
Young([email protected]).
©
Copyright 1989Regentsofthe BSD-style
University of California
To obtain the source code covered under the MPL, please visit
.
expatpp
Mozilla Public License 1.0
Warranty Information
167
Mozilla Public License Version 1.0
1.9. "Modifications" means any addition to or deletion from the
substance or structure of either the Original Code or any previous
Modifications. When Covered Code is released as a series of
files, a Modification is:
1. Definitions.
1.1. "Contributor" means each entity that creates or contributes
to the creation of Modifications.
A. Any addition to or deletion from the contents of a file
containing Original Code or previous Modifications.
1.2. "Contributor Version" means the combination of the Original
Code, prior Modifications used by a Contributor, and the
Modifications made by that particular Contributor.
B. Any new file that contains any part of the Original Code or
previous Modifications.
1.3. "Covered Code" means the Original Code or Modifications or
the combination of the Original Code and Modifications, in each
case including portions thereof.
1.10. "Original Code" means Source Code of computer software
code which is described in the Source Code notice required by
Exhibit A as Original Code, and which, at the time of its release
under this License is not already Covered Code governed by this
License.
1.4. "Electronic Distribution Mechanism" means a mechanism
generally accepted in the software development community for
the electronic transfer of data.
1.11. "Source Code" means the preferred form of the Covered
Code for making modifications to it, including all modules it
contains, plus any associated interface definition files, scripts
used to control compilation and installation of an Executable, or a
list of source code differential comparisons against either the
Original Code or another well known, available Covered Code of
the Contributor's choice. The Source Code can be in a
compressed or archival form, provided the appropriate
decompression or de-archiving software is widely available for
no charge.
1.5. "Executable" means Covered Code in any form other than
Source Code.
1.6. "Initial Developer" means the individual or entity identified
as the Initial Developer in the Source Code notice required by
Exhibit A.
1.7. "Larger Work" means a work which combines Covered Code
or portions thereof with code not governed by the terms of this
License.
1.8. "License" means this document.
168
1.12. "You" means an individual or a legal entity exercising rights
under, and complying with all of the terms of, this License or a
future version of this License issued under Section 6.1. For legal
entities, "You" includes any entity which controls, is controlled
by, or is under common control with You. For purposes of this
definition, "control" means (a) the power, direct or indirect, to
cause the direction or management of such entity, whether by
contract or otherwise, or (b) ownership of fifty percent (50%) or
more of the outstanding shares or beneficial ownership of such
entity.
2.2. Contributor Grant. Each Contributor hereby grants You a
world-wide, royalty-free, non-exclusive license, subject to third
party intellectual property claims:
(a) to use, reproduce, modify, display, perform, sublicense and
distribute the Modifications created by such Contributor (or
portions thereof) either on an unmodified basis, with other
Modifications, as Covered Code or as part of a Larger Work; and
(b) under patents now or hereafter owned or controlled by
Contributor, to Utilize the Contributor Version (or portions thereof),
but solely to the extent that any such patent is reasonably
necessary to enable You to Utilize the Contributor Version (or
portions thereof), and not to any greater extent that may be
necessary to Utilize further Modifications or combinations.
2. Source Code License.
2.1. The Initial Developer Grant. The Initial Developer hereby
grants You a world-wide, royalty-free, non-exclusive license,
subject to third party intellectual property claims:
3. Distribution Obligations.
(a) to use, reproduce, modify, display, perform, sublicense and
distribute the Original Code (or portions thereof) with or without
Modifications, or as part of a Larger Work; and
3.1. Application of License. The Modifications which You create
or to which You contribute are governed by the terms of this
License, including without limitation Section 2.2. The Source
Code version of Covered Code may be distributed only under the
terms of this License or a future version of this License released
under Section 6.1, and You must include a copy of this License
with every copy of the Source Code You distribute. You may not
offer or impose any terms on any Source Code version that alters
or restricts the applicable version of this License or the
(b) under patents now or hereafter owned or controlled by Initial
Developer, to make, have made, use and sell ("Utilize") the
Original Code (or portions thereof), but solely to the extent that
any such patent is reasonably necessary to enable You to Utilize
the Original Code (or portions thereof) and not to any greater
extent that may be necessary to Utilize further Modifications or
combinations.
recipients' rights hereunder. However, You may include an
Warranty Information
169
additional document offering the additional rights described in
Section 3.5.
3.4. Intellectual Property Matters
(a) Third Party Claims. If You have knowledge that a party claims
an intellectual property right in particular functionality or code (or
its utilization under this License), you must include a text file with
the source code distribution titled "LEGAL" which describes the
claim and the party making the claim in sufficient detail that a
recipient will know whom to contact. If you obtain such
knowledge after You make Your Modification available as
described in Section 3.2, You shall promptly modify the LEGAL
file in all copies You make available thereafter and shall take
other steps (such as notifying appropriate mailing lists or
newsgroups) reasonably calculated to inform those who received
the Covered Code that new knowledge has been obtained.
3.2. Availability of Source Code. Any Modification which You
create or to which You contribute must be made available in
Source Code form under the terms of this License either on the
same media as an Executable version or via an accepted
Electronic Distribution Mechanism to anyone to whom you made
an Executable version available; and if made available via
Electronic Distribution Mechanism, must remain available for at
least twelve (12) months after the date it initially became
available, or at least six (6) months after a subsequent version of
that particular Modification has been made available to such
recipients. You are responsible for ensuring that the Source Code
version remains available even if the Electronic Distribution
Mechanism is maintained by a third party.
(b) Contributor APIs. If Your Modification is an application
programming interface and You own or control patents which are
reasonably necessary to implement that API, you must also
include this information in the LEGAL file.
3.3. Description of Modifications. You must cause all Covered
Code to which you contribute to contain a file documenting the
changes You made to create that Covered Code and the date of
any change. You must include a prominent statement that the
Modification is derived, directly or indirectly, from Original Code
provided by the Initial Developer and including the name of the
Initial Developer in (a) the Source Code, and (b) in any notice in
an Executable version or related documentation in which You
describe the origin or ownership of the Covered Code.
3.5. Required Notices. You must duplicate the notice in Exhibit A
in each file of the Source Code, and this License in any
documentation for the Source Code, where You describe
recipients' rights relating to Covered Code. If You created one or
more Modification(s), You may add your name as a Contributor to
the notice described in Exhibit A. If it is not possible to put such
notice in a particular Source Code file due to its structure, then
170
you must include such notice in a location (such as a relevant
directory file) where a user would be likely to look for such a
notice. You may choose to offer, and to charge a fee for, warranty,
support, indemnity or liability obligations to one or more
recipients of Covered Code. However, You may do so only on Your
own behalf, and not on behalf of the Initial Developer or any
Contributor. You must make it absolutely clear than any such
warranty, support, indemnity or liability obligation is offered by
You alone, and You hereby agree to indemnify the Initial
Developer and every Contributor for any liability incurred by the
Initial Developer or such Contributor as a result of warranty,
support, indemnity or liability terms You offer.
License and that the license for the Executable version does not
attempt to limit or alter the recipient's rights in the Source Code
version from the rights set forth in this License. If You distribute
the Executable version under a different license You must make it
absolutely clear that any terms which differ from this License are
offered by You alone, not by the Initial Developer or any
Contributor. You hereby agree to indemnify the Initial Developer
and every Contributor for any liability incurred by the Initial
Developer or such Contributor as a result of any such terms You
offer.
3.7. Larger Works. You may create a Larger Work by combining
Covered Code with other code not governed by the terms of this
License and distribute the Larger Work as a single product. In
such a case, You must make sure the requirements of this
License are fulfilled for the Covered Code.
3.6. Distribution of Executable Versions. You may distribute
Covered Code in Executable form only if the requirements of
Section 3.1-3.5 have been met for that Covered Code, and if You
include a notice stating that the Source Code version of the
Covered Code is available under the terms of this License,
including a description of how and where You have fulfilled the
obligations of Section 3.2. The notice must be conspicuously
included in any notice in an Executable version, related
documentation or collateral in which You describe recipients'
rights relating to the Covered Code. You may distribute the
Executable version of Covered Code under a license of Your
choice, which may contain terms different from this License,
provided that You are in compliance with the terms of this
4. Inability to Comply Due to Statute or Regulation.
If it is impossible for You to comply with any of the terms of this
License with respect to some or all of the Covered Code due to
statute or regulation then You must: (a) comply with the terms of
this License to the maximum extent possible; and (b) describe
the limitations and the code they affect. Such description must
be included in the LEGAL file described in Section 3.4 and must
be included with all distributions of the Source Code. Except to
the extent prohibited by statute or regulation, such description
Warranty Information
171
must be sufficiently detailed for a recipient of ordinary skill to be
able to understand it.
otherwise make it clear that your version of the license contains
terms which differ from the Mozilla Public License and Netscape
Public License. (Filling in the name of the Initial Developer,
Original Code or Contributor in the notice described in Exhibit A
shall not of themselves be deemed to be modifications of this
License.)
5. Application of this License.
This License applies to code to which the Initial Developer has
attached the notice in Exhibit A, and to related Covered Code.
6. Versions of the License.
7. DISCLAIMER OF WARRANTY.
6.1. New Versions. Netscape Communications Corporation
("Netscape") may publish revised and/or new versions of the
License from time to time. Each version will be given a
distinguishing version number.
COVERED CODE IS PROVIDED UNDER THIS LICENSE ON AN "AS
IS" BASIS, WITHOUT WARRANTY OF ANY KIND, EITHER
EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION,
WARRANTIES THAT THE COVERED CODE IS FREE OF DEFECTS,
MERCHANTABLE, FIT FOR A PARTICULAR PURPOSE OR NON-
INFRINGING. THE ENTIRE RISK AS TO THE QUALITY AND
PERFORMANCE OF THE COVERED CODE IS WITH YOU. SHOULD
ANY COVERED CODE PROVE DEFECTIVE IN ANY RESPECT, YOU
(NOT THE INITIAL DEVELOPER OR ANY OTHER CONTRIBUTOR)
ASSUME THE COST OF ANY NECESSARY SERVICING, REPAIR OR
CORRECTION. THIS DISCLAIMER OF WARRANTY CONSTITUTES
AN ESSENTIAL PART OF THIS LICENSE. NO USE OF ANY COVERED
CODE IS AUTHORIZED HEREUNDER EXCEPT UNDER THIS
DISCLAIMER.
6.2. Effect of New Versions. Once Covered Code has been
published under a particular version of the License, You may
always continue to use it under the terms of that version. You
may also choose to use such Covered Code under the terms of
any subsequent version of the License published by Netscape.
No one other than Netscape has the right to modify the terms
applicable to Covered Code created under this License.
6.3. Derivative Works. If you create or use a modified version of
this License (which you may only do in order to apply it to code
which is not already Covered Code governed by this License), you
must (a) rename Your license so that the phrases "Mozilla",
"MOZILLAPL", "MOZPL", "Netscape", "NPL" or any confusingly
similar phrase do not appear anywhere in your license and (b)
8. TERMINATION.
This License and the rights granted hereunder will terminate
automatically if You fail to comply with terms herein and fail to
172
cure such breach within 30 days of becoming aware of the
breach. All sublicenses to the Covered Code which are properly
granted shall survive any termination of this License. Provisions
which, by their nature, must remain in effect beyond the
termination of this License shall survive.
10. U.S. GOVERNMENT END USERS.
The Covered Code is a "commercial item," as that term is
defined in 48 C.F.R. 2.101 (Oct. 1995), consisting of "commercial
computer software" and "commercial computer software
documentation," as such terms are used in 48 C.F.R. 12.212
(Sept. 1995). Consistent with 48 C.F.R. 12.212 and 48 C.F.R.
227.7202-1 through 227.7202-4 (June 1995), all U.S.
Government End Users acquire Covered Code with only those
rights set forth herein.
9. LIMITATION OF LIABILITY.
UNDER NO CIRCUMSTANCES AND UNDER NO LEGAL THEORY,
WHETHER TORT (INCLUDING NEGLIGENCE), CONTRACT, OR
OTHERWISE, SHALL THE INITIAL DEVELOPER, ANY OTHER
CONTRIBUTOR, OR ANY DISTRIBUTOR OF COVERED CODE, OR
ANY SUPPLIER OF ANY OF SUCH PARTIES, BE LIABLE TO YOU OR
ANY OTHER PERSON FOR ANY INDIRECT, SPECIAL, INCIDENTAL,
OR CONSEQUENTIAL DAMAGES OF ANY CHARACTER INCLUDING,
WITHOUT LIMITATION, DAMAGES FOR LOSS OF GOODWILL,
WORK STOPPAGE, COMPUTER FAILURE OR MALFUNCTION, OR
ANY AND ALL OTHER COMMERCIAL DAMAGES OR LOSSES, EVEN
IF SUCH PARTY SHALL HAVE BEEN INFORMED OF THE
POSSIBILITY OF SUCH DAMAGES. THIS LIMITATION OF LIABILITY
SHALL NOT APPLY TO LIABILITY FOR DEATH OR PERSONAL
INJURY RESULTING FROM SUCH PARTY'S NEGLIGENCE TO THE
EXTENT APPLICABLE LAW PROHIBITS SUCH LIMITATION. SOME
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THAT
EXCLUSION AND LIMITATION MAY NOT APPLY TO YOU.
11. MISCELLANEOUS.
This License represents the complete agreement concerning
subject matter hereof. If any provision of this License is held to
be unenforceable, such provision shall be reformed only to the
extent necessary to make it enforceable. This License shall be
governed by California law provisions (except to the extent
applicable law, if any, provides otherwise), excluding its conflict-
of-law provisions. With respect to disputes in which at least one
party is a citizen of, or an entity chartered or registered to do
business in, the United States of America: (a) unless otherwise
agreed in writing, all disputes relating to this License (excepting
any dispute relating to intellectual property rights) shall be
subject to final and binding arbitration, with the losing party
paying all costs of arbitration; (b) any arbitration relating to this
Agreement shall be held in Santa Clara County, California, under
Warranty Information
173
the auspices of JAMS/EndDispute; and (c) any litigation relating
to this Agreement shall be subject to the jurisdiction of the
Federal Courts of the Northern District of California, with venue
lying in Santa Clara County, California, with the losing party
responsible for costs, including without limitation, court costs
and reasonable attorneys fees and expenses. The application of
the United Nations Convention on Contracts for the International
Sale of Goods is expressly excluded. Any law or regulation which
provides that the language of a contract shall be construed
against the drafter shall not apply to this License.
Software distributed under the License is distributed on an "AS
IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or
implied. See the License for the specific language governing
rights and limitations under the License.
The Original Code is ________________________________.
The Initial Developer of the Original Code is
________________________. Portions created by
______________________ are Copyright (C) ______
_______________________. All Rights Reserved.
Contributor(s):____________________________________."
Copyright (c) 1991, 1993 The Regents of the University of California.
All rights reserved.
12. RESPONSIBILITY FOR CLAIMS.
Except in cases where another Contributor has failed to comply
with Section 3.4, You are responsible for damages arising,
directly or indirectly, out of Your utilization of rights under this
License, based on the number of copies of Covered Code you
made available, the revenues you received from utilizing such
rights, and other relevant factors. You agree to work with affected
parties to distribute responsibility on an equitable basis.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
EXHIBIT A.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
"The contents of this file are subject to the Mozilla Public License
Version 1.0 (the "License"); you may not use this file except in
compliance with the License. You may obtain a copy of the
License at http://www.mozilla.org/MPL/
.
174
3. All advertising materials mentioning features or use of this
software must display the following acknowledgement:
MD4 Message-Digest Algorithm
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991.
This product includes software developed by the University of
California, Berkeley and its contributors.
All rights reserved.
License to copy and use this software is granted provided that it
is identified as the "RSA Data Security, Inc. MD4 Message-Digest
Algorithm" in all material mentioning or referencing this software
or this function.
4. Neither the name of the University nor the names of its
contributors may be used to endorse or promote products
derived from this software without specific prior written
permission.
License is also granted to make and use derivative works
provided that such works are identified as "derived from the RSA
Data Security, Inc. MD4 Message-Digest Algorithm" in all
material mentioning or referencing the derived work.
THIS SOFTWARE IS PROVIDED BY THE REGENTS AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
ARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL
THE REGENTS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
RSA Data Security, Inc. makes no representations concerning
either the merchantability of this software or the suitability of this
software for any particular purpose. It is provided "as is" without
express or implied warranty of any kind.
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
These notices must be retained in any copies of any part of this
documentation and/or software
MD5 Message-Digest Algorithm
Copyright (C) 1991-2, RSA Data Security, Inc. Created 1991.
All rights reserved.
License to copy and use this software is granted provided that it
is identified as the "RSA Data Security, Inc. MD5 Message-Digest
Warranty Information
175
Algorithm" in all material mentioning or referencing this software
or this function.
THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, WITHOUT
LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTIBILITY
AND FITNESS FOR A PARTICULAR PURPOSE.
License is also granted to make and use derivative works
provided that such works are identified as "derived from the RSA
Data Security, Inc. MD5 Message-Digest Algorithm" in all
material mentioning or referencing the derived work.
LICENSE ISSUES
==============
RSA Data Security, Inc. makes no representations concerning
either the merchantability of this software or the suitability of this
software for any particular purpose. It is provided "as is" without
express or implied warranty of any kind.
The OpenSSL toolkit stays under a dual license, i.e. both the
conditions of the OpenSSL License and the original SSLeay
license apply to the toolkit. See below for the actual license texts.
Actually both licenses are BSD-style Open Source licenses. In
case of any license issues related to OpenSSL please contact
These notices must be retained in any copies of any part of this
documentation and/or software.
Copyright (c) 1989 Regents of the University of California.
OpenSSL License
Copyright (c) 1998-2004 The OpenSSL Project.
All rights reserved.
All rights reserved.
Redistribution and use in source and binary forms are permitted
provided that the above copyright notice and this paragraph are
duplicated in all such forms and that any documentation,
advertising materials, and other materials related to such
distribution and use acknowledge that the software was
developed by the University of California, Berkeley. The name of
the University may not be used to endorse or promote products
derived from this software without specific prior written
permission.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1) Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2) Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
176
disclaimer in the documentation and/or other materials provided
with the distribution.
INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
3) All advertising materials mentioning features or use of this
software must display the following acknowledgment:
"This product includes software developed by the OpenSSL
4) The names "OpenSSL Toolkit" and "OpenSSL Project" must
not be used to endorse or promote products derived from this
software without prior written permission. For written
permission, please contact [email protected].
This product includes cryptographic software written by Eric
Young ([email protected]). This product includes software
written by Tim Hudson ([email protected]).
5) Products derived from this software may not be called
"OpenSSL" nor may "OpenSSL" appear in their names without
prior written permission of the OpenSSL Project.
Original SSLeay License
Copyright (C) 1995-1998 Eric Young ([email protected])
All rights reserved.
6) Redistributions of any form whatsoever must retain the
following acknowledgment:
This package is an SSL implementation written by Eric Young
"This product includes software developed by the OpenSSL
Project for use in the OpenSSL Toolkit (http://www.openssl.org/)"
The implementation was written so as to conform with
Netscape’s SSL.
THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT ''AS
IS'' AND ANY EXPRESSED OR IMPLIED WARRANTIES, INCLUDING,
BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL PROJECT
OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
This library is free for commercial and non-commercial use as
long as the following conditions are adhered to. The following
conditions apply to all code found in this distribution, be it the
RC4, RSA, lhash, DES, etc., code; not just the SSL code. The SSL
documentation included with this distribution is covered by the
Warranty Information
177
same copyright terms except that the holder is Tim Hudson
([email protected]). Copyright remains Eric Young's, and as such
any Copyright notices in the code are not to be removed. If this
package is used in a product, Eric Young should be given
attribution as the author of the parts of the library used.
4) If you include any Windows specific code (or a derivative
thereof) from the apps directory (application code) you must
include an acknowledgement: "This product includes software
written by Tim Hudson ([email protected])"
THIS SOFTWARE IS PROVIDED BY ERIC YOUNG ``AS IS'' AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY,
OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
This can be in the form of a textual message at program startup
or in documentation (online or textual) provided with the
package.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
1) Redistributions of source code must retain the copyright
notice, this list of conditions and the following disclaimer.
2) Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
3) All advertising materials mentioning features or use of this
software must display the following acknowledgement:
The license and distribution terms for any publicly available
version or derivative of this code cannot be changed. i.e. this
code cannot simply be copied and put under another distribution
license [including the GNU Public Licence.]
"This product includes cryptographic software written by Eric
Young([email protected])"
The word 'cryptographic' can be left out if the routines from the
library being used are not cryptographic related).
178
Copyright (C) 2004, Karlsruhe University
The Australian Public Licence B (OZPLB) Version 1-0
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions
are met:
Copyright (c) 2005, University of New South Wales, Australia
All rights reserved.
Developed by: Operating Systems, Embedded and Distributed
Systems Group (DiSy), University of New South Wales
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
Permission is granted by University of New South Wales, free of
charge, to any person obtaining a copy of this software and any
associated documentation files (the "Software") to deal with the
Software without restriction, including (without limitation) the
rights to use, copy, modify, adapt, merge, publish, distribute,
communicate to the public, sublicense, and/or sell, lend or rent
out copies of the Software, and to permit persons to whom the
Software is furnished to do so, subject to the following
conditions:
THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY
EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY
OF SUCH DAMAGE.
Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimers.
Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimers in the documentation and/or other materials provided
with the distribution.
Neither the name of University of New South Wales, nor the
names of its contributors, may be used to endorse or promote
Warranty Information
179
products derived from this Software without specific prior written
permission.
LICENCE, THE SOFTWARE OR THE USE OF OR OTHER DEALINGS
WITH THE SOFTWARE, EVEN IF NATIONAL ICT AUSTRALIA OR ITS
CONTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF
SUCH CLAIM, LOSS, DAMAGES OR OTHER LIABILITY.
EXCEPT AS EXPRESSLY STATED IN THIS LICENCE AND TO THE
FULL EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE
IS PROVIDED "AS-IS", AND NATIONAL ICT AUSTRALIA AND ITS
CONTRIBUTORS MAKE NO REPRESENTATIONS, WARRANTIES OR
CONDITIONS OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING
BUT NOT LIMITED TO ANY REPRESENTATIONS, WARRANTIES OR
CONDITIONS REGARDING THE CONTENTS OR ACCURACY OF THE
SOFTWARE, OR OF TITLE, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE, NONINFRINGEMENT, THE ABSENCE OF
LATENT OR OTHER DEFECTS, OR THE PRESENCE OR ABSENCE
OF ERRORS, WHETHER OR NOT DISCOVERABLE.
If applicable legislation implies representations, warranties, or
conditions, or imposes obligations or liability on University of New
South Wales or one of its contributors in respect of the Software
that cannot be wholly or partly excluded, restricted or modified,
the liability of University of New South Wales or the contributor is
limited, to the full extent permitted by the applicable legislation,
at its option, to:
a. in the case of goods, any one or more of the following:
i. the replacement of the goods or the supply of equivalent goods;
ii. the repair of the goods;
iii. the payment of the cost of replacing the goods or of acquiring
equivalent goods;
TO THE FULL EXTENT PERMITTED BY APPLICABLE LAW, IN NO
EVENT SHALL NATIONAL ICT AUSTRALIA OR ITS CONTRIBUTORS
BE LIABLE ON ANY LEGAL THEORY (INCLUDING, WITHOUT
LIMITATION, IN AN ACTION OF CONTRACT, NEGLIGENCE OR
OTHERWISE) FOR ANY CLAIM, LOSS, DAMAGES OR OTHER
LIABILITY, INCLUDING (WITHOUT LIMITATION) LOSS OF
PRODUCTION OR OPERATION TIME, LOSS, DAMAGE OR
CORRUPTION OF DATA OR RECORDS; OR LOSS OF ANTICIPATED
SAVINGS, OPPORTUNITY, REVENUE, PROFIT OR GOODWILL, OR
OTHER ECONOMIC LOSS; OR ANY SPECIAL, INCIDENTAL,
INDIRECT, CONSEQUENTIAL, PUNITIVE OR EXEMPLARY
DAMAGES, ARISING OUT OF OR IN CONNECTION WITH THIS
iv. the payment of the cost of having the goods repaired; or
b. in the case of services:
i. the supplying of the services again; or
ii. the payment of the cost of having the services supplied again.
The construction, validity and performance of this licence is
governed by the laws in force in New South Wales, Australia.
180
Copyright (C) 2003-2006, National ICT Australia (NICTA)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
Redistribution and use in source and binary forms, with or
without modification, are permitted provided that the following
conditions are met:
Mach Operating System
Copyright (c) 1993 Carnegie Mellon University
All Rights Reserved.
1. Redistributions of source code must retain the above copyright
notice, this list of conditions and the following disclaimer.
Permission to use, copy, modify and distribute this software and
its documentation is hereby granted, provided that both the
copyright notice and this permission notice appear in all copies of
the software, derivative works or modified versions, and any
portions thereof, and that both notices appear in supporting
documentation.
2. Redistributions in binary form must reproduce the above
copyright notice, this list of conditions and the following
disclaimer in the documentation and/or other materials provided
with the distribution.
THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND
CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED
WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR USE.
CARNEGIE MELLON ALLOWS FREE USE OF THIS SOFTWARE IN
ITS "AS IS" CONDITION. CARNEGIE MELLON DISCLAIMS ANY
LIABILITY OF ANY KIND FOR ANY DAMAGES WHATSOEVER
RESULTING FROM THE USE OF THIS SOFTWARE.
ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR
CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, IDENTAL,
SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
Carnegie Mellon requests users of this software to return to:
Software Distribution Coordinator, or
School of Computer Science
Carnegie Mellon University
Pittsburgh PA 15213-3890
any improvements or extensions that they make and grant
Carnegie Mellon the rights to redistribute these changes.
Warranty Information
181
Precautions for Transfer and Disposal
Customer Care Center:
1000 Klein Rd.
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Richardson, Texas 75082
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
Phone: 1-888-987-HELP (4357)
©
2010 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
182
Index
Answer Options 133
DTMF Tones 135
TTY Mode 134
A
C
Calculator 102
Converter 104
Eco 103
Normal 102
Adding a New Contact 43
Alarm Clock
disabling an alarm 106
erasing an alarm 107
setting an alarm 106
Answer Options 133
Answering a Call 34
Assisted Dialing 136
Auto Retry 134
B
key 17, 21
Tip 103
Calendar
lens 19
Backup Assistant 58
Banners
Contacts
adding 43
Backup Assistant 58
editing 46
erasing 45
Favorites 52
Call Functions
Call In-Progress options 35
Recent Calls 35
sending calls to Voicemail 34
Voice Commands 37
ERI 119
personal 118
Battery
charging 8
indicator 6
installing 7
non-supported batteries 9
removing 7
Bluetooth
menu 112
183
fields 43
finding 48
Groups 49
Email 75
Emergency Contacts
End/Power key 21
entering numbers 62
F
Favorites 52
assigning 53
using 54
Fonts
dial 123
menu 123
messaging font size 124
settings 123
Games 84
G
managing 47
My Name Card 56
speed dials 51
Converter 104
D
Data Settings 135
Dial Fonts 123
Dialing
H
assisted 136
Directional Keys 20
Display
Home screen 23
banners 118
event status icons 26
backlight 119
banners 118
Easy Set-up 118
language 127
settings 118
themes 121
DTMF Tones 135
E
Easy Set-up
Displays 10, 118
Sounds 10, 116
setting display theme 121
I
Icons
Annunciator line 24
184
Event Status 26
Home screen 24
In Case of Emergency 54
assigning 54
entering personal info 55
removing emergency contacts 55
K
Search 80
Memory Card
formatting 14
installing 13
removing 14
card 137
phone 137
items 27
Messaging 64
font size 124
Message Folders 71
New Message Key 64
Picture Messages 66
Quick Reply 64
QWERTY action 64
settings 78
Mobile IM 76
command keys 87
launching 86
editing a playlist 95
player settings 94
playing music 93
sync music 82
Keypad
lock settings 115
L
Language setting 127
Left soft key 20
Lock
edit codes 128
key 22
setting 130
Locking and Unlocking
locking the keypad 12
locking the phone 11
unlocking the keypad 12
unlocking the phone 11
M
Main Menu Settings 121
Media Center
Extras 85
Text Messages 65
185
My Name Card 56
creating 56
sending by Bluetooth 57
sending by message 56
My Ringtones 81
My Sounds 81
set shortcuts 125
creating and sending 66
viewing 70
Playlist
creating a playlist 94
Q
setting 132
updating existing contact 36
Ringtones 81
S
Search 80
N
Navigation Keys 19
directional keys 20
soft keys 19
lock phone 130
restrictions 129
display 118
language 127
setting 125
setting directional keys 126
setting My Shortcuts 126
New Message Key 22, 64
Notepad 108
P
Pauses
Personal Banner 118
Personal Information 55
Phone Info 138
Phone Safety 150
Phone Settings 125
airplane mode 125
current country 128
language 127
using 133
R
Recent Calls
creating new contact 36
deleting records 37
making calls 36
restoring default settings 131
security 128
186
Social Beat 92
Social Networks
key 22
Calendar 104
Converter 104
USB Mass Storage 108
V
key 22
key 21
playing music 40
Sound Settings 115
call sounds 116
Easy Set-up 116
keypad sounds 117
keypad volume 117
power on/off 118
service alerts 117
Sounds 81
Speakerphone
key 21
Speed Dials 51
assigning 51
Tip calculator 103
T-Ratings 152
TTY Mode 12
search 39
Voice Privacy 135
Voicemail
checking 13
removing 52
Standard Limited Warranty
160
U
UL Certification 141
features of your phone 15
Home screen 23
Stop Watch 107
T
Text Messages
creating and sending 65
viewing 70
Menu 26
in Messaging 75
setting up 13
Tip Calculator 103
187
Volume
key 17, 21
keypad 117
master 110
W
Waits
adding to phone numbers 48
Wallpaper 120
Warranty Information 160
World Clock 107
188
|