Samsung SCH R261 User Manual

prompted. (For more information, refer to “Lock Phone” on

Tip: You can cycle between T9 Word

Abc, and 123 by repeatedly pressing

and holding

until the phone beeps.

Lock Mode

When the phone is in Lock Mode, restrictions are placed on

phone use. You can receive calls and messages, but cannot place

outgoing calls (except for emergency numbers) until you unlock

the phone. Lock Mode also restricts access to menus and the

Volume key. Unlock your phone by entering the lock code when

page 94.)

Understanding Your Phone

Section 3: Call Functions

This section explains how to make and answer calls. This section

also includes the features and functionality associated with

making or answering calls.

You can specify other numbers as emergency numbers using the

Emergency # settings. (For more information, refer to

“Emergency #” on page 94.)

Number Entry Dialing

1. Turn on the phone and enter the number to call.

Important!: Emergency number 911 is preset into your phone. You can dial

this number almost any time, even when the phone is locked or

restricted.

2. Press

to place the call.

If you call 911 an audible tone plays and an Emergency prompt

displays on the screen for the duration of the call.

Dialing Emergency Numbers

Because of various transmission methods, network parameters,

and user settings necessary to complete a call from your wireless

phone, a connection cannot always be guaranteed. Therefore,

emergency calling may not be available on all wireless networks

at all times.

Dialing International Numbers

Call Another Country — Manual Method

1. In standby mode, enter 011 (the three-digit exit code for

the United States).

2. Enter the country code for the country you are calling.

Important!: DO NOT depend on this phone as a primary method of calling

3. Enter the number to dial then press

911 or for any other essential or emergency communications.

Note: Puerto Rico and Canada are on the North American dialing plan.

Making calls to Puerto Rico and Canada is similar to making calls

within the United States, no unique country codes are necessary.

To place an emergency call:

1. Turn on the phone and enter 911.

2. Press

to place the call.

Call Another Country — Shortcut Method

To manually call a number with pause(s) without storing to your

Contacts list:

1. In standby mode, press and

1. Enter the number to call.

hold

until a plus sign (+)

2. Press Options. A pop-up menu displays the following

displays on the screen.

Note: When you press

your phone automatically

manual pause options:

•

2-Sec Pause: a two-second pause.

Wait: a hard pause (awaits input from you).

replaces the + with 011, the

three-digit exit code for the

United States.

3. Highlight the desired pause option and press

to enter

the highlighted pause into your number sequence.

Note: If you select 2-Sec Pause, P displays on the screen. If you select Wait,

2. Enter the country code for the country that you are calling.

W displays on the screen.

3. Enter the number that you wish to call, then press

4. Press

to call the number.

Manual Pause Calling

Pause Dialing From a Contacts Entry

When you call automated systems (like banking services), you

are often required to enter a password or account number.

Instead of manually entering the numbers each time, you can

store the numbers in your Contacts along with special characters

called pauses.

•

If you speed dial a contact that contains (two-second)

simply wait for the pauses to pass and the dialing to complete.

If you speed dial a contact that contains (hard) pause(s), wait for the

appropriate prompt(s) from the number you are calling (credit card

number, bank account number, and so on) and enter the appropriate

response(s).

pause(s)

•

2-Sec Pause: P pause — A two-second pause stops the calling

sequence for two seconds and then automatically sends the remaining

digits.

•

Wait: W pause — A hard pause stops the calling sequence until you

press

Call Functions

Three-Touch Dialing

Speed Dialing

Once you store phone numbers to the Contacts List, you can set

up to 8 speed dial entries and then dial them simply by touching

the associated numeric key.

Memory locations 100 through 999 are special Three-Touch

dialing locations.

Example: For location number 113, briefly press

again, then press and hold until the name and number display

on the screen and the number is dialed.

, briefly press

One-Touch Dialing

Speed Dial numbers 2 through 9 are special One-Touch dialing

numbers. You can call the phone numbers stored in your phone’s

Contacts list and assigned Speed Dial numbers 2 through 9 by

pressing and holding a single key.

Quick Search Dialing

Use the Quick Search feature to dial

any number stored in your Contacts

list by pressing the number keys that

correspond to the first few letters of a

Contact name. For more information,

refer to “Quick Search” on page 97.

Example: For Speed Dial number 3, press and hold

until the name and

number display on the screen and the number is dialed.

Two-Touch Dialing

Memory locations 10 through 99 are special Two-Touch dialing

locations.

Voice Dialing

Your R261 mobile phone includes

voice recognition software that lets

you dial numbers using your voice.

Example: For location number 13, briefly press

until the name and number display on the screen and the

number is dialed.

, then press and hold

Using Voice Dial

There are two types of voice dialing available:

•

Name Dialing

Digit Dialing

Name Dialing dials any number stored in your Contacts list by

saying the name of the contact. Digit Dialing dials any valid

telephone number, as well as numbers not stored to your

Contacts list by speaking the digits of the number.

5. Press Repeat to say the name again.

– or –

Press Settings, then press Exit to exit Voice Dial without

dialing.

Dialing by Name

If the recognized name has multiple numbers stored for it

(that is, Home, Work, Mobile, and so on), Voice Dial

displays the possible choices and prompts you with

“Which number?”

To dial a name, do the following:

1. In standby mode, press and hold

“Say a Command” displays on the screen and is

pronounced through the earpiece.

6. Say one of the following number types:

2. Say, “Call”.

•

“

Home

Work

Mobile

”

You are prompted to “Say the name or #”.

3. Speak clearly and say the name of a person in your

Voice Dial dials the specified number.

Contacts list, first name followed by last name.

Dialing by Number

If the name is recognized, Voice Dial repeats the name and

dials the number.

To dial a number, do the following:

If Voice Dial is not sure which name you said, it displays a

choice list of up to three names and prompts you with “Did

you say?” followed by the first name on the list.

1. In standby mode, press and hold

“Say a Command” displays on the screen and is

pronounced through the speaker.

4. Say “Yes” to confirm the name or “No” to hear the next

name, or use the keypad to select the correct name from

the list. (For more information, refer to “Choice Lists” on

page 82.)

2. Say “Call”.

You are prompted to “Say the name or #”.

3. Speak clearly and say the telephone number of the person

you want to call.

Call Functions

If the number is recognized, Voice Dial repeats and dials

the number. If Voice Dial is not sure it has recognized the

number, it displays a choice list of up to three numbers and

prompts you with “Did you say?” followed by the first

number on the list.

• Speaker On / Off: Enables/disables Speakerphone mode during

this call.

• Messages: The Messages menu displays on the screen.

• Contacts: The Contacts Find screen displays on the screen.

• Recent Calls: The All Calls Log screen displays on the screen.

• Send DTMF: Send your phone number as DTMF tones.

4. Say “Yes” to confirm the number or “No” to hear the next

one, or use the keypad to select the correct number from

the list. (For more information, refer to “Choice Lists” on

page 82.)

• Voice Privacy: A safety feature to protect you from unauthorized

use.

• Location: Lets you change your phone’s Location setting.

•

Press Repeat to say the name again.

Press o exit Voice Dial without dialing.

2. Press

to exit the menu.

Answering a Call

Open the flip on your phone and press

Ignoring a Call

When you ignore an incoming call, the call is immediately

forwarded to voice mail.

ᮣ

Tip: You can set your phone to automatically answer calls

or to answer calls when you press any key except the

key or automatically, as indicated by the Auto Answer icon

ᮣ

Press Ignore during an incoming call. The call forwards to

voice mail.

(

). (For more information, refer to “Call Settings” on

Adjusting the Call Volume

In standby mode, press the Volume key (

page 90.)

) down until the

Call Volume Level dial displays on the screen.

The In-Call Options Menu

Calls Log

You can access numerous menus and features during a call.

1. Press Options during a call and select one of the following

options:

The Calls log displays information about Outgoing, Incoming, and

Missed calls. You can also view times for your last call and the

time totals for all calls.

Viewing the Calls Log

1. In standby mode, press

2. Highlight a call, then press

OPEN to view the Name of

the called party (if in the Contacts list), the number dialed,

the time and date the call was placed, and the duration of

the call (in minutes and seconds).

Menu ➔ Calls. The following

Calls logs and options display:

• Outgoing Calls

3. Press Options. A pop-up menu containing the following

• Incoming Calls

options displays on the screen:

• Missed Calls

•

Save: Save the number to your Contacts.

• All Calls

Details: Calls to Contacts Only — Displays the entry for the called

Contact.

• Call Timer

• Data Counter

•

Erase: Erase the selected call from your Outgoing call log.

Lock/Unlock: Protect the selected call from being erased.

Erase All: Erase all calls from your Outgoing call log.

2. Select the Calls log to view or the function you want to use.

Outgoing Calls

View Timer: Displays the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, or Lifetime Call.

Your phone retains information about the last 90 outgoing calls

and stores them in the Outgoing calls log. You can review the

Outgoing calls log for the time and date of a call, as well as other

information.

4. Press Msgs to launch the Send Message menu. The

following options display on the screen:

Note: To quickly view your most recent calls, briefly press

in standby

•

Text Message: Lets you send a text message to the selected

number called.

mode.

•

Picture Message: Lets you send a picture message to the

selected number called.

1. At the Calls menu, select Outgoing Calls. A list of your

outgoing calls displays on the screen.

Note: For more information, refer to “Types of Messages” on page 45.

5. Select the desired message type to compose a message.

Call Functions

Your phone retains information about the last 90 Incoming calls

and stores them in the Incoming call log. You can review the

Incoming call log for the time and date of the call, as well as

other information.

•

Picture Message: Lets you send a picture message to the

selected calling number.

Note: For more information, refer to “Types of Messages” on page 45.

1. At the Calls menu, select Incoming Calls. A list of your

5. Select an option to perform its function.

Incoming calls displays on the screen.

Missed Calls

2. Highlight a call, then press

OPEN to view the Name of

Your phone retains information about the last 90 missed calls

(calls that were never picked up) and stores them in the Missed

call log. You can review the Missed call log for the time and date

of the call, as well as other information.

the caller (if in the Contacts list), the originating number,

the time and date the call was received, and the duration

of the call (in minutes and seconds).

3. Press Options. A pop-up menu containing the following

1. At the Calls menu, select Missed Calls. A list of your

options displays on the screen:

missed calls displays on the screen.

•

Save: Save the number to your Contacts.

2. Highlight a call, then press

OPEN to view the Name of

Details: Calls from Contacts Only — Displays the entry for the

calling Contact.

the caller (if in the Contacts list), the originating number,

and the time and date the call was received.

•

Erase: Erase the selected call from your Incoming calls log.

Lock/Unlock: Protect the selected call from being erased.

Erase All: Erase all calls from your Incoming calls log.

3. Press Options. A pop-up menu containing the following

options displays on the screen:

•

Save: Save the number to your Contacts.

View Timer: Displays the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, or Lifetime Calls.

Details: Calls from Contacts Only — Displays the entry for the

calling Contact.

•

Erase: Erase the selected call from your Missed call log.

Lock/Unlock: Protect the selected call from being erased.

Erase All: Erase all calls from your Missed call log.

4. Press Msgs. The following options display on the screen:

•

Text Message: Lets you send a text message to the selected

calling number.

•

View Timer: Displays the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, or Lifetime Calls.

•

Details: Calls from Contacts Only — Displays the entry for the

calling/called Contact.

•

Erase: Erase the selected call from your Calls log.

Lock/Unlock: Protect the selected call from being erased.

Erase All: Erase all calls from your Calls log.

4. Press Msgs. The following options display on the screen:

•

Text Message: Lets you send a text message to the selected

called number.

View Timer: Displays the number of calls and/or the total time

spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming

Calls, All Calls, Last Reset, or Lifetime Calls.

•

Picture Message: Lets you send a picture message to the

selected called number.

4. Press Msgs. The following options display on the screen:

Note: For more information, refer to “Types of Messages” on page 45.

•

Text Message: Lets you send a text message to the selected

calling/called number.

5. Select an option to perform its function.

•

Picture Message: Lets you send a picture message to the

All Calls

selected calling/called number.

You can review all of the calls log entries (outgoing, incoming,

and missed calls) for the time and date of a call, as well as other

information.

Note: For more information, refer to “Types of Messages” on page 45.

5. Select an option to perform its function.

1. At the Calls menu, select All Calls. A list of all logged calls

displays on the screen.

Call Timer

2. Highlight a call, then press

OPEN to view further

View the duration of your last call, total calls, and calls made

during the life cycle of you phone using the Call Timer feature.

information about the call.

3. Press Options. A pop-up menu containing the following

Note: Call Timer is not for billing purposes.

options displays on the screen:

•

Save: Save the number to your Contacts.

1. At the Calls menu, select Call Timer. The following timers

display on the screen:

Call Functions

•

Last Call: View the duration of your last call.

Note: Data Counter is not for billing purposes.

Outgoing Calls: View the duration of the total outgoing calls made

on your phone, in your home zone, since the last erasure.

1. At the Calls menu, select Data Counter. The following

•

Incoming Calls: View the duration of the total incoming calls

received on your phone, in your home zone, since the last erasure.

options display on the screen:

•

Transmit: View the total amount of data transmitted by your phone

since the last reset.

Received: View the total amount of data received by your phone

since the last reset.

Total: View the total amount of data sent or received by your phone

since the last reset.

Roaming Calls: View the total calls duration on your phone while

roaming since the last erasure.

All Calls: View the duration of the total call, incoming, outgoing,

and data calls made on your phone since the last erasure.

•

Last Reset: View the time and date all timers were last reset.

•

Last Reset: View the time and date all timers were last reset.

Lifetime Data Counter: View the total amount of data sent or

received by your phone since activation (Lifetime Data Counter

cannot be reset).

Lifetime Calls: View the duration of all calls since your phone was

activated.

2. Press Reset to reset a selected counter (except Last Reset

and Lifetime Calls), highlight the desired counter.

2. Highlight the desired counter and press Reset to reset a

selected counter (except Last Reset and Lifetime Data

Counter).

3. Press Reset All to reset all counters except Lifetime Calls.

4. Press

to exit the Call Timer list.

3. Press Reset All to reset all counters except Lifetime Data

Note: Although most call timers can be erased, the Lifetime call timer can

Counter.

never be erased.

4. Press

to exit the Call Timer list.

Data Counter

Note: Although most data counters can be erased, the Lifetime Data Counter

View the amount of Transmit data, Receive data, and Total data

transmitted or received since the last time you reset the data

counters, and the Lifetime amount of data transmitted or

received.

can never be erased.

Roaming

What is Roaming?

Roaming lets you use your R261 phone when you travel outside

of your Wireless Carrier’s coverage area. The Roaming icon (

)

displays in the top line of the screen when Roaming is active, and

extra charges may apply when making or receiving calls.

Note: Some features may be unavailable while roaming. Roaming also

consumes additional power from the battery requiring more frequent

recharging. Contact your Wireless Carrier for more information about

Roaming.

How Roaming Works

Roam Option lets you set roaming preferences if you move in and

out of your home network. The following roaming options are

available:

•

Home Only: Your phone is available for normal operation only in the

designated coverage area.

•

Automatic: Your Wireless Carrier’s Preferred Roaming List (PRL) of

networks is used to acquire service. If no preferred networks are

found, any digital system is acquired.

Note: For more information, refer to “System Select” on page 96.

Call Functions

Section 4: Entering Text

This section outlines how to select the desired text entry mode

when entering characters using the phone keypad. This section

also describes how to use the T9 predictive text entry system to

reduce the number of key strokes needed to enter text.

•

Symbols: Using the phone keypad, enter a symbol into your message

by pressing the number to the left of the symbol in the SYMBOLS pop-

up window.

Emoticons: Using the phone keypad, enter an emoticon into your

message by pressing the number to the left of the emoticon in the

EMOTICONS pop-up window.

Changing the Text Entry Mode

Text messages can be made up of alphabetical characters,

numbers, and symbols. You can use the following text entry

modes to simplify text entry:

The current text entry mode (T9 Word Abc, ABC, 123, or Symbols)

is indicated in the lower part of a text entry screen. To change the

text entry mode while composing a text message:

•

T9 Word: Press each phone key only once to enter the letter of the

ᮣ

Repeatedly press and hold

to toggle between Abc,

word that you’re spelling. T9 WORD mode letter options are:

123, and T9Word modes.

–

T9 word: Enter all lower case letters

T9 Word: Enter initial capital letters

T9 WORD: Enter all upper case letters

Or, do the following:

1. Press the Left soft key.

•

Abc: Enter letters by repeatedly pressing each phone key until the

desired character (as shown on the key) displays on the screen. ABC

mode letter options are:

–

2. Highlight one of the following text entry modes:

• T9Word

• Abc

abc: Enter all lower case letters

Abc: Enter initial capital letters

ABC: Enter all upper case letters

• 123

• Symbols

• Emoticons

•

123: Enter numbers by pressing the corresponding keys on the phone

keypad.

3. Press

Using T9 Mode

Using Abc Mode

1. While composing a text message, press the Left soft key,

T9 Word recognizes commonly used words for the numeric

sequence of key presses and inserts the word into your message.

T9 Word is much faster than the traditional method of text entry

(Abc) and requires only one key press per letter of the word that

you’re spelling.

then select Abc or ABC

2. Enter characters while in Abc mode by pressing a key

repeatedly until the desired character displays on the

screen.

1. While composing a text message, press the Left soft key,

Example: Press

once for “G” and twice for “H”.

then select T9Word

2. For practice, enter the word “Samsung” by pressing each

3. Pause briefly and the displayed character is accepted and

of the following keys only once:

inserted into your message.

4. Press

to enter a space. Press

to enter a period.

Entering Numbers

Enter numbers into a text message while in 123 mode.

1. While composing a text message, press the Left soft key,

T9 Word recognizes that the most commonly used word for

the numeric sequence you just entered is “Samsung.”

then select 123

2. Enter numbers while in 123 mode by pressing the key

labeled with the corresponding number that you wish to

insert into your message.

If more than one word shares the same numeric sequence,

T9 Word pops-up the most commonly used. Press the

Navigation key Up or Down to display other words, if

available.

Note: Press

to enter a space. Press

to enter a period. These key

functions apply to both T9 Word and Abc modes. (For other symbols,

see “Entering Symbols” on page 32.)

Entering Text

Entering Symbols

Example: Press

for

Enter symbols such as “@” or “%” into a text message.

4. Repeat these steps to insert additional emoticon into your

1. While composing a text message, press the Left soft key,

then select Symbols. The first of three symbol screens

displays on the screen.

message.

Adding Words to the T9 Dictionary

1. While composing a text message, press the Left soft key,

2. Use the Prev and Next soft keys to page through the other

symbols, if desired.

then select Add T9 Word

3. Press the key that corresponds with the symbol that you

2. Type the word to add to the dictionary and press

wish to enter.

The T9 word is added to the T9 dictionary.

Example: Press

for an exclamation point (!).

4. Repeat these steps to insert additional symbols into your

message.

Entering Emoticons

Enter symbols such as “:)” or “;-)” into a text message.

1. While composing a text message, press the Left soft key,

then select Emoticons. The first of two emoticon screens

displays on the screen.

2. Use the Prev and Next soft keys to page through the other

emoticons, if desired.

3. Press the key that corresponds with the emoticon that you

wish to enter.

Section 5: Understanding Contacts

This section details how you can manage your daily contacts by

storing their names and numbers in your Contacts list. You can

have your Contacts entries sorted by name.

Open Contacts

1. In standby mode, press Contacts

Tip: To launch the Contacts menu using a voice command — In standby

Contacts

mode, press and hold

until the phone prompts, “Say a command.”

Say “Go to Contacts” into the microphone.

Up to 1000 entries can be stored in Contacts. Each entry can

have up to three associated phone numbers and one Email

address. Each phone number can be up to 32 digits in length,

including 2-Sec or Wait pauses (see “Manual Pause Calling” on

page 21.) Associated names can be up to 32 characters in

length. You can assign the Speed Dial numbers of your choice for

each entry. You can also mark your Contacts list as Restricted to

prevent unauthorized viewing. (For more information, refer to

“Restriction” on page 96.)

2. Select one of the following:

• Go To: Locates and displays a list of name(s) or number(s) that

match the entered characters or digits.

• Edit: Edits the selected contact information.

• View: Displays the selected contact information.

• Options: Displays a list of configurable contact options.

Tip: You can also access the Find option from standby mode, by pressing

Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch

Contacts or press and hold

until the phone prompts, “Say a

Dialing allow you to call numbers stored in Contacts faster. (For more

command.” Say “Lookup” followed by a Contact name into the

microphone.

information, refer to “Speed Dial” on page 39.)

Understanding Contacts

–

New Contact: Add a new entry to Contacts.

Finding a Contacts Entry

Shortcut Key Method

Erase: Erase the name and associated information.

Send Txt Msg: Create and send a text message to the selected

Contact.

If you’ve stored a name entry in Contacts, Find allows you to find

it quickly by entering the first few letters of a Contact’s name.

–

Send Pic Msg: Create and send a picture message to the selected

Contact.

1. In standby mode, press Contacts

–

Call: Dial the number associated with the name.

The Find screen displays on the screen with a grayed Go To

field displayed, followed by the first few names in your

Contacts list.

Send Name Card Via Bluetooth: Send selected Contacts to another

Bluetooth device.

Voice Method

Tip: You can also locate a contacts entry by pressing and holding

until

the phone prompts, “Say a command” then say “Lookup” followed by

Use the Voice SVC Lookup command to view contact information

for any named contact stored in your Contacts list by saying the

name.

a Contact name.

2. Enter the first few characters of a name as entered in

Contacts. For example, if you saved the name as “Amy

Smith”, begin the search by pressing (for “A”).

Note: The Lookup command displays the requested contact information in

the display but does not dial any phone numbers for the contact.

As you enter letters, the names of the closest matches

display on the screen.

To look up information for a specific contact:

1. In standby mode, press and hold

Say a Command” displays on the screen and is

pronounced through the speaker.

to launch Voice SVC.

3. When the desired entry displays, highlight the entry.

“

•

Press

Press Edit to add or change information for this entry.

Press View to show information about the entry.

to dial the number associated with the name.

2. Say “Lookup”, and when prompted, speak clearly and say

the full name of the person you want to look up, exactly as

it is entered in your Contacts list.

Press Options and select the desired option to access its sub-menu

on the screen:

–

Send Txt Msg: Create and send a text message to the selected

Contact.

•

If Voice SVC recognizes the name you said, the Contact entry

information for that name displays on the screen.

Send Pic Msg: Create and send a picture message to the selected

Contact.

If Voice SVC does not recognize the name you said, a choice list of

up to three names displays on the screen, and Voice SVC prompts

you with “Did you say?” followed by the first name on the list.

–

Call: Dial the number associated with the Contact name.

Send Name Card Via Bluetooth: Send the select Contact’s

information to another Bluetooth device.

3. Say “Yes” to confirm the name or “No” to hear the next

name.

Select the desired option.

– or –

Quick Search Method

Use the keypad to select the correct name from the list.

For information on enabling Quick

Search, see “Quick Search” on

page 97.

(For more information, refer to “Choice Lists” on page 82.)

– or –

Press Repeat to say the name again.

1. In standby mode and with

Quick Search enabled, press

the first few numeric keys that

correspond to the letters of the

Contact’s name.

– or –

Press Settings and press Exit to exit Voice SVC without

dialing.

The contact information for the name you selected displays

on the screen.

Example: To search for “Sally” you would enter 725

2. Press the Up navigation key. A list of Contact names that

begin with letters corresponding to the number keys you

pressed displays on the screen.

•

Press

Press Erase to remove this entry from your Contacts list.

Press Edit to add or change information for this entry.

Press Options to access the following options.

to dial the number associated with the name.

Understanding Contacts

3. Highlight the searched for Contact.

Menu Method

•

Press

to call the Contact.

1. In standby mode, press

Menu ➔ Contacts

➔

Add New

Entry

to view the Contact information.

The New Contact screen displays on the screen with the

Name field highlighted.

Adding a New Contacts Entry

You can use either of two methods to add an entirely new entry to

Contacts.

2. Enter the name of the new entry using the keypad. (For

more information, refer to “Entering Text” on page 30.)

Dial Method

3. Select the number type that matches your new entry

1. Using the keypad, enter the number you wish to add to

(Mobile, Home, Work, Pager, @Email, Group, Ringtone, or Fax).

your Contacts.

4. Enter a phone number or Email address in the highlighted

2. Press Save. The following options display on the screen:

field.

• Create New: Creates a new Contacts entry.

5. Repeat steps 3 and 4 as needed.

• Update Existing: Adds the number you entered to an existing

Contacts entry.

6. Press

to save the new entry.

Editing a Contacts Entry

Editing Contacts Name and Numbers

1. In standby mode, press Contacts and locate the Contacts

entry you wish to change. (For more information, refer to

“Finding a Contacts Entry” on page 34.)

3. Select Create New

4. Select the number type that matches your new entry

Mobile, Home, Work, Pager, or Fax). The New Contact screen

(

displays on the screen.

5. Enter a name to associate with the Contacts entry.

6. Press

Save to save the entry.

2. Press

View to view the contact details. The View

Contact screen displays on the screen showing the

highlighted entry’s information.

Add Pauses to Contacts Numbers

3. Use the Navigation key to review the information for the

entry that you wish to change, then press

Edit Contact screen displays on the screen.

Edit. The

Calls to automated systems such as banking services often

require a password or account number. Instead of manually

entering these numbers, you can store them in a Contacts entry

with the phone number and with special characters called

pauses, up to a maximum of 32 digits.

4. Highlight the particular information you want to add or

change.

•

Press

to backspace and delete numbers or letters.

•

Wait: Stops the calling sequence until the phone receives further input.

2-Sec Pause: Stops the calling sequence for two seconds, then sends

the remaining digits.

Press and hold

highlighted field.

to clear all numbers or letters in the

•

Press Options and select one of the following:

–

Set Speed Dial Remove speed dial: Assign/remove a speed dial

number. (For more information, refer to “Speed Dial” on page 39.)

Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.

For example, two consecutive 2-Sec Pauses cause a total pause time

of four seconds. Keep in mind that pauses count as digits towards the

32-digit maximum.

–

Set as default: Set the number the phone will dial when Contacts

dialing or speed dialing.

–

Wait: A hard pause (waits for input from you).

To add pauses to a Contacts entry number, do the following:

2-Sec Pause: A 2-second pause after which dialing resumes. (For

more information, refer to “Add Pauses to Contacts Numbers”

on page 37.)

1. In standby mode, press Contacts and locate the Contacts

entry associated with the number in which to include one

or more pauses. (For more information, refer to “Finding a

Contacts Entry” on page 34.)

5. Press

to save your changes.

– or –

2. Select and edit the desired number. (For more information,

Press

to discard your changes and press No at the

refer to “Editing a Contacts Entry” on page 36.)

prompt.

Understanding Contacts

3. Press Options and select the pause option to add to the

number sequence.

4. Use the keypad to edit the Email address. (For more

. (For more information, refer to “Finding a Contacts

• Wait: A hard pause (waits for input from you).

5. Press

to save your changes.

• 2-Sec Pause: A 2-second pause after which dialing resumes.

Assigning a Ringtone to a Contacts Entry

4. Press

to store the number to Contacts.

When you assign a ringtone to a Contacts entry, the phone plays

the ringtone that you assigned to the entry when you receive a

call from that Contact instead of the ringtone currently assigned

to Voice Calls.

Pause Dial from Contacts

1. If you stored the number using 2-second pause(s), simply

find the Contacts entry, highlight the number, and press

Entry” on page 34.)

1. In standby mode, press Contacts, locate the Contacts entry,

then press

View to view the contact details. (For more

information, refer to “Finding a Contacts Entry” on

page 34.)

2. If you stored the number using Wait(s), find and dial the

number from Contacts and wait for the appropriate prompt

from the dialed number.

The Edit Contact screen displays on the screen.

3. Press

to resume dialing the number.

2. Highlight the Ringtone field, then press

Edit. The Edit

Contact menu displays on the screen.

Edit an Existing Email Address

3. Press Set, select the ringtone or sound you want to assign

1. In standby mode, press Contacts and locate the Contacts

entry to edit. (For more information, refer to “Finding a

Contacts Entry” on page 34.)

to the Contacts entry, then press OK

The Edit Contact screen re-displays on the screen with the

name of the selected file in the Ringtone field.

2. Highlight the desired Contacts entry, then press

View

to view the contact details.

4. Press

to save the ringer assignment to the selected

Contacts entry.

3. Highlight the Email field.

3. Press Yes to confirm erasure of the selected Contact.

Saving a Number After a Call

Once you finish a call, you can store the caller’s number to your

Contacts list.

– or –

Press No to retain the Contact.

Speed Dial

Note: If the call was incoming and Caller ID information was unavailable,

then the Save option is also unavailable.

A Contacts entry’s Speed Dial number corresponds to the number

keys you press to speed dial one of that entry’s numbers.

1. Press

to end your call. The call time, length of call,

Example:

phone number, and name of the party (if available) display

on the screen.

•

To speed dial the Contacts entry assigned to Speed Dial 5, press and

hold , (1-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 35, press

then press and hold , (2-touch dialing).

To speed dial the Contacts entry assigned to Speed Dial 235, press

, press , then press and hold , (3-touch dialing).

2. Press Save. The Save menu displays on the screen

showing the following options:

• Create New: Lets you create a new Contacts entry.

• Update Existing: Lets you add the number you entered to an

existing Contacts entry.

3. Follow the instructions in the upcoming sections

depending on whether the number is a new entry or you

wish to add it to an existing entry.

You can assign one or more Speed Dial numbers to a Contacts

entry during new entry creation or by editing an existing entry.

Assignment During Entry Creation

Deleting a Contacts Entry

To assign a Speed Call number to a new Contacts entry number,

do the following:

1. In standby mode, press Contacts

2. Locate the Contacts entry to delete, then press Options

➔

1. Follow either of the New Contacts entry procedures until

you enter a name for the entry (see “Adding a New

Contacts Entry” on page 36.)

Erase. (For more information, refer to “Finding a Contacts

Entry” on page 34.) The phone prompts to confirm the

erasure.

Understanding Contacts

2. After entering the Contacts entry name, do not press

Note: Press No to discard the assignment and return to the Speed Dial

Instead, highlight a number field.

screen.

3. Press Options. The following options display on the screen:

8. Press

to save your changes.

• Set Speed Dial: Assign a speed dial number.

Assignment to an Existing Entry

1. In standby mode, press Contacts, locate the Contacts entry,

• Set as default: Set the number the phone will dial when Contacts

dialing, speed dialing, or voice dialing.

• Wait: A hard pause (waits for input from you).

then press

View to view the contact details.

• 2-Sec Pause: A 2-second pause after which dialing resumes. (For

more information, refer to “Add Pauses to Contacts

Numbers” on page 37.)

2. Locate the Contacts entry to assign, then press Edit. (For

more information, refer to “Finding a Contacts Entry” on

page 34.)

4. Select Set Speed Dial. The Speed Dial screen displays on

the screen.

3. Highlight the number field you wish to assign a Speed Dial

number.

5. Select an Unassigned Speed Dial number or enter an

Unassigned Speed Dial number in the Go To field using the

keypad.

4. Press Options. The following options display on the screen:

• Set Speed Dial: Assign a speed dial number.

• Set as default: Set the number the phone will dial when Contacts

Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.

These numbers are already assigned to Voicemail (001), to

Information (411), to Customer Care (611), and to emergency use

(911).

dialing, speed dialing, or voice dialing.

• Wait: A hard pause (waits for input from you).

• 2-Sec Pause: A 2-second pause after which dialing resumes. (For

more information, refer to “Add Pauses to Contacts

Numbers” on page 37.)

6. Press

Set. You are prompted to confirm your Speed

Dial number assignment.

5. Select Set Speed Dial. The Speed Dial screen displays on

7. Press Yes to save your Speed Dial assignment and return

to the New Contact screen.

the screen.

6. Select an Unassigned Speed Dial number or enter an

Unassigned Speed Dial number in the Go To field using the

keypad.

• Wait: A hard pause (waits for input from you).

• 2-Sec Pause: A 2-second pause after which dialing resumes. (For

more information, refer to “Add Pauses to Contacts

Numbers” on page 37.)

Important!: Do not enter Speed Call numbers 1, 211, 311, 411, 611, or 911.

These numbers are already assigned to Voicemail (001), to

Information (411), to Customer Care (611), and to emergency use

(911).

4. Select Remove speed dial. “Remove speed dial?” pops up in

the display to confirm your desire to remove the entry.

5. Press Yes to remove the Speed Dial assignment. “Speed

Dial Removed” displays, and you are returned to the Edit

Contact screen.

7. Press

Set. You are prompted to confirm your Speed

Dial number assignment.

6. Perform steps 4 through 7 of “Assignment During Entry

8. Press Yes to save your Speed Dial assignment and return

Creation” on page 39.

to the New Contact screen.

Contacts Groups

Changing a Speed Dial Location

Contact Groups let you easily send messages to multiple,

selected Contacts. You can also use Groups to find Contact

entries and to add/remove Contacts names in a Group or to

create or rename a Group.

1. In standby mode, press Contacts, locate the Contacts entry,

then press

View to view the contact details. (For more

information, refer to “Finding a Contacts Entry” on

page 34.) The Edit Contact screen displays on the screen.

Add Contacts Entry to a Group

Using Add New/Edit Contact Option

2. Highlight the number field marked by the Speed Dial

icon ( ) and press

Edit.

To add a Contact to a Group using either the Add New Contact

option or the Edit Contact option, do the following:

3. Press Options. The following options display on the screen:

• Remove speed dial: Unassign the current speed dial number.

1. Create a Contacts entry or find a Contacts entry that you

• Set as default: Set the number the phone will dial when Contacts

dialing, speed dialing, or voice dialing.

want to add to a Group.

2. View the Contacts entry.

Understanding Contacts

3. Highlight the Group field, then press Edit

➔

Set

• Family

• Friends

The Select Group screen displays on the screen showing

Groups similar to the following:

• No Groups

2. Highlight a Group, then press Options. The following

options popup in the display:

• Send Txt Msg: Send a text message to the selected Group.

• Business

• Send Pic Msg: Send a picture message to the selected Group.

• Colleague

• Rename: Change the name of the selected Group.

• Family

• Erase: Delete the selected Group, and send the Contacts back to

• Friends

No Group.

4. Select the Group to which you want to assign the selected

• Add: Add one or more Contacts to the selected Group.

Contact and press

You are returned to the New Contact

and the selected Group name populates the Group field.

5. Press Save to save your changes.

3. Select Add. The Add Contacts screen displays on the

Edit Contact screen

screen showing a list of Contacts entries.

4. Do one of the following:

•

Use the Navigation key to highlight an entry you want to add to the

Using Group Add Option

group, then press

check box.

Mark. A check mark displays in the entry’s

The Add option lets you add one or more existing Contacts to a

Group.

Repeat as needed to check all the desired Contacts.

1. In standby mode, press

➔

Contacts

➔

Group.

•

Press Options, then select Mark All

The Group List screen displays on the screen showing

Groups similar to the following:

• No Groups

Note: Highlight the Contact and press

Mark to clear the check mark.

• Business

• Colleague

5. Press Done when you have marked the Contacts you want

to add to the group. “Contact added to group” displays on

the screen, followed by the selected Group list including

the added Contacts.

The Group List screen displays on the screen.

2. Highlight the Group name other than No Group that you

wish to change, then press Options

➔

Rename.

The Rename Group screen displays on the screen.

Remove Contacts Entry from a Group

3. Enter changes to the group name using the keypad. (For

1. In standby mode, press

The Group List screen displays on the screen.

2. Highlight the Group (other than No Group) from which you

want to remove a Contact, then press View

Menu ➔ Contacts

➔

Group.

more information, refer to “Entering Text” on page 30.)

4. Press

Save when you complete renaming.

The group name is renamed to the new name.

Erase a Group

A list of the Contacts assigned to the selected Group

displays on the screen.

The Erase option lets you delete a Group, freeing you to reassign

the Contacts formerly in the Group.

3. Highlight the Contact you wish to remove.

1. In standby mode, press

The Group List screen displays on the screen.

2. Highlight the Group that you wish to delete, press Options

Erase

Menu ➔ Contacts

➔

Group.

4. Press Remove. You are prompted to confirm the removal of

the selected Contact.

5. Press Yes to remove the selected Contact from this Group

➔

and return it to No Group.

– or –

You are prompted to confirm the Group erasure.

3. Press Yes to confirm erasure of the Group.

Press No to keep the selected Contact in this Group.

– or –

Rename a Group

Press No to retain the Group.

The Rename option lets you change the name any of the Groups,

except No Group.

1. In standby mode, press

Menu ➔ Contacts

➔

Group.

Understanding Contacts

Memory Info

The Memory Info menu option lets you view the amount of

memory you have used to store Contacts entries, as well as the

memory remaining to store more Contacts entries.

ᮣ

In standby mode, press

Info

Menu ➔ Contacts

➔

Memory

The Memory Info Contacts screen displays on the screen

showing the Total amount of memory in your phone, the

amount of memory Used to store Contacts entries, and the

remaining (Free) for Contacts entries.

Section 6: Messages

This section explains how to send or receive different types of

messages. This section also describes the features and

functionality associated with messaging.

2. Enter the phone number or Email address of the recipient

and press

– or –

Types of Messages

Your phone is able to send and receive Text messages to

compatible phones and devices. Text messages can be up to 160

characters in length.

3. Press Add and select a Contact entry, a Contacts Group, or

the originator of Recent Calls, then press

field displays on the screen.

. The Text:

4. Enter the text content of your message using the keypad.

Note: Available memory is shared between all messages. You can store up to

100 messages. However, the exact number is dependent upon

message length.

5. Press Options to complete the message text and set

message send options.

Create and Send Text Messages

6. Select one of the following options:

Menu Method

1. In standby mode, press Messages

• Edit Send To: Displays the Create Txt Msg screen and allows you to

enter another recipient phone number or email address.

➔

Send Message

➔

Text

• Add Quick Text: Inserts a preformatted string of text in the body of

the message.

Message. The Create Txt Msg screen displays.

Tip: To launch the Create Txt Msg screen using a voice command — In

standby mode, press and hold

• Save As Draft: Save the message to your Draft folder.

until the phone prompts, “Say a

command.” Say “Send Text” into the microphone. You are then prompted

to say a Contact name or a number for the first recipient of the

message.

• Priority Level: Choose High or Normal.

• Validity Period: Allows you to set the length of time your text

messages are stored at the message center while attempts are

made to deliver them.

Messages

• Deferred Delivery: Sets a delay time before the phone sends a

4. Enter the text content of your message using the keypad.

information, refer to “Chat View” on page 48.)

message.

• Delivery Ack: Choose On or Off — Requests confirmation when

your message is received.

5. Press Options to complete the message text and set

message send options. The following options display on

the screen:

• Add To Contacts: Save the recipient’s number or Email address as

a Contacts list entry.

• Cancel Message: End composition of this message. You are

prompted to choose whether to save this message to your Drafts

folder.

• Edit Send To: Allows you to edit the Send To field.

• Add Quick Text: Insert pre-composed text in your message.

• Save As Draft: Save the message to your Draft folder.

7. Press

Send when finished entering your message.

•

Priority Level: Choose High, or Normal.

Chat Method

Validity Period: Enter the Date when this message will cease to be

valid, then use the Left and Right navigation keys to choose the

Using the chat method, you can quickly and easily send a new

message to a Contact or number with whom you’ve already

exchanged messages.

Time

• Deferred Delivery: Sets a delay time before the phone sends a

message.

1. In standby mode, press Messages

stored incoming messages displays.

2. Select a message from the person you wish to contact and

press Open. The Chat with... screen displays on the

➔

Inbox. A list of your

• Delivery Ack: Choose On or Off — Requests confirmation when

your message is received.

• Add To Contacts: Save the recipient’s number or Email address as

a Contacts list entry.

screen, showing the text of your previous message

exchanges. (For more information, refer to “Chat View” on

page 48.)

• Cancel Message: Cancels the message you were composing.

6. Press

Send when finished entering your message.

3. Press Reply, then select Text Message. The Reply – Txt Msg

screen displays on the screen.

View a Text Message Now

Receive Text Messages

1. After you select the View Now option, the new text

message displays on the screen in Chat View. (For more

When you receive a message in standby mode, the ringer sounds

(unless turned off) and New Message displays on the screen

along with the closed envelope icon (

2. Press Options while viewing your message. The following

options display on the screen:

ᮣ

Select one of the following, displayed options.

•

View Now: Opens the message, where you have the option to

Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,

Message Info, or Extract.

• View Last Message: Displays the last message from this recipient.

• Forward: Send a copy of this message to another recipient.

• Reply With Copy: Compose and send a reply message to the

originator of the received message and include a copy of the

original message.

View Later: Saves the message to your Inbox, where you can view it

later, then returns your phone to standby mode.

Receive Messages During a Call

• Save Quick Text: Save the text in this message as a new

precomposed message text.

When you receive a message while in a call, New Message

displays on the screen along with the closed envelope icon

• Lock / Unlock: Block/permit erasure of the highlighted message.

(

). The date and time of the message also display on the

• Add To Contacts: Save the sender’s number to your Contacts.

screen along with the following options:

• Message Info: Displays message delivery status, addressee, size,

and so on.

•

View Now: Opens the message, where you have the option to

Forward, Reply With Copy, Save as Preset, Lock, Add To Contacts,

Message Info, or Extract.

• Extract: Lets you call the originator of the highlighted message.

• Add To Contacts: Save the sender’s number to your Contacts.

3. Select an option to perform its function.

View Later: Saves the message to your Inbox, where you can view it

later, and returns your phone to call mode.

Note: For more information on received message options, see “Inbox” on

page 53.

Messages

View a Text Message Later

Send Picture Messages in Camera Mode

1. In standby mode, press Messages

➔

Inbox. The Inbox

Picture messages can be sent to recipients with compatible

phones or devices. You can even accompany a Picture message

with a voice memo or preloaded sound.

screen displays on the screen.

2. Select the new message. The new text message displays

on the screen in Chat View. (For more information, refer to

“Chat View” on page 48.)

Tip: You can send a Picture message to up to ten recipients. Enter each

recipient’s address or phone number in a separate Send to field of the

Picture message composer.

Chat View

Chat View mode is the default format for viewing text messages.

In Chat View mode, you can view a series of text messages

exchanged between your phone and another phone as if the

messages were a chat session, instead of viewing only the

incoming messages individually.

1. In standby mode, press and hold the Camera key (

The camera viewfinder screen displays on the screen.

2. Using the display as a viewfinder, when the image that you

wish to send displays on the screen, press

take a picture.

Take to

Note: To disable/enable Chat View mode, change the Message View setting.

Note: For more information about using the camera feature in your phone,

(For more information, refer to “Message Settings” on page 57.)

see “Camera” on page 59.

3. Press

Send to save the picture and begin the picture

Tip: To simplify the exchange of messages with Message View setting to

message delivery process. The Create Pic Msg screen

displays with the Send To list highlighted.

Chat, you might want to change the Auto Save setting to On

The following icons indicate which responses are incoming and

outgoing:

4. Enter the phone number or Email address of the recipient

of the Picture message, then press

Incoming Message

Outgoing Message

Tip: Press Add to display a pop-up menu containing: Contacts Groups, and

Recent Calls. These options allow you to find and add recipients to the

Send To: list.

5. Enter a subject for the Picture message using the keypad.

10. Press Options to complete the message text and set

message send options. The following options display on

the screen:

• Preview: View the picture as the recipient will see it.

6. Press the Navigation key Down then enter the message

text in the Text field using the keypad. (For more

Your new picture displays in the Picture field.

• Add Quick Text: Add precomposed text to your message.

• Save As Draft: Save the message to your Draft folder.

• Priority Level: Choose High Normal, or Low.

7. Highlight the Sound field if you wish to insert a sound into

your Picture message, and do the following; otherwise,

proceed to step 11.

• Validity Period: Enter the Date when this message will cease to be

valid, then use the Left and Right navigation keys to choose the

Time

8. Press Sound. and select one of the following options:

• Deferred Delivery: Sets a delay time before the phone sends a

message.

• Record New: Record a new memo to insert into the message.

• Delivery Ack: Choose On or Off — Requests confirmation when

Note: You can record and insert a voice memo of up to 60 seconds in length,

if you record first before attaching a picture. If a picture is attached

before recording, the size of the voice memo is limited to the amount

of remaining memory.

your message is received.

• Cancel Message: Cancels composing this message and closes the

screen.

• Remove Pic: Remove the picture from your message.

• Audio files list: Select from the list of previously recorded voice

memos and preloaded audio files on your phone.

•

Remove Sound: Removes the sound file from your message.

• Add Slide/Erase Slide: Inserts a blank page or erases the inserted

9. Select an option, a sound file, and insert the sound into

slide in this message.

your message.

– or –

• Add To Contacts: Adds the number entered to the Contacts list.

11. Press

to send the message. “Sending Message”

Press

to exit the pop-up menu without inserting a

displays on the screen and a progress bar indicates the

send status.

sound.

Messages

3. The Subject field displays on the screen. Enter a subject for

the Picture message using the keypad. (For more

Send Picture Messages in Standby Mode

Send Picture messages to recipients with a compatible phone or

other device, and accompany the Picture message with a voice

memo, ring tone, or downloaded melody.

4. Press the Navigation key Down until the Text field is

highlighted, then enter the message text using the keypad.

keypad. (For more information, refer to “Entering Text” on

Tip: You can send a Picture message to up to ten recipients. Enter each

recipient’s address or phone number in a separate Send To field of the

Picture message composer.

5. Press the Down navigation key until the Picture field is

highlighted, then press Picture. A photo gallery of

thumbnail images displays on the screen.

1. In standby mode, press Messages

Picture Message

➔

Send Message

➔

6. Highlight a picture to add to the message.

The Create Pic Msg screen displays on the screen showing

the Send To list.

7. Press View to expand the highlighted picture to full-screen

size.

Tip: To launch the Create Pic Msg screen using a voice command — In

standby mode, press and hold

until the phone prompts, “Say a

8. Press Camera if you want to include a new picture.

command.” Say “Send Picture” into the microphone. You are then

prompted to say a Contact name or a number for the first recipient of the

message.

Note: For more information about using the camera feature in your phone,

see “Camera” on page 59.

2. Enter the phone number or Email address of the recipient

9. Press

to add the highlighted picture to your message.

using the keypad, then press

You are returned to the Create Pic Msg screen with the

selected picture in the Picture field.

Tip: Press Add to display a pop-up menu containing: Contacts Groups, and

Recent Calls. These options allow you to find and add recipients to the

Send To list.

10. If you wish to insert a sound into your Picture message,

use the Down navigation key to highlight the Sound: field

press Sound; otherwise, proceed to step 12.

• Validity Period: Enter the Date when this message will cease to be

valid, then use the Left and Right navigation keys to choose the

Time

• Delivery Ack: Choose On or Off — Requests confirmation when

your message is received.

The My Ringtones screen displays on the screen showing

the following options:

• Cancel Message: Cancels composing this message and closes the

screen.

• Record New: Record a new memo to insert into the message.

• Add Slide/Erase Slide: Inserts a blank page or erases the inserted

Note: You can record and insert a voice memo of up to 60 seconds in length,

if you record first before attaching a picture. If a picture is attached

before recording, the size of the voice memo is limited to the amount

of remaining memory.

slide in this message.

• Remove Pic: Remove the picture from your message.

• Remove Sound: Remove the sound file from your message.

• Add To Contacts: Save the recipient’s number or Email address as

a Contacts list entry.

• Audio files list: Select from the list of previously recorded voice

memos and preloaded audio files on your phone.

14. Press

to send the message. “Sending Message”

11. Select an option and a sound file, and insert the sound into

displays on the screen and a progress bar indicates the

send status.

your message.

12. Press

to exit the pop-up menu without inserting a

Receive Picture Messages

When you receive a Picture Message in standby mode, the ringer

sound.

13. Press Options to complete the message text and set

message send options. Select one of the following:

• Preview: View the picture as the recipient will see it.

sounds (unless turned off) and New Pic Message displays on the

screen along with the closed envelope icon (

The date and time of the message also display on the screen.

• Add Quick Text: Add precomposed text to your message.

• Save As Draft: Save the message to your Draft folder.

•

Priority Level: Choose High

Normal, or Low

Messages

ᮣ

Select one of the following options:

View a Picture Message Now

1. After you select the View Now option, “Connecting

”

• View Now: Retrieves and opens the message, where you have the

option to Erase, Reply, Forward, Save Pic, Save Sound, Save Quick

Text, Lock or Add to Contexts.

displays on the screen followed by “Receiving Message

and a progress bar indicating that the message is

downloading to your phone.

”

• View Later: Saves the message to your inbox, where you can view

it later, then returns your phone to standby mode.

2. After the Picture message has downloaded, an alert

• Reject: Rejects the picture message.

sounds, and the new Picture message displays on the

View a Picture Message Later

1. In standby mode, press Messages

screen. If the message includes a sound file, the phone

begins playing it.

➔

Inbox. The Inbox

3. Press Options while viewing your message. The following

displays on the screen.

options display on the screen:

2. If the new picture message is not highlighted, select the

new message. “Connecting” displays on the screen

followed by “Receiving Message” and a progress bar

indicating that the message is downloading to your phone.

• Play Again: Play the sound file included in the picture message

again.

• Forward: Send a copy of this message to another recipient.

• Save Pic: Save the picture included in this message to the My

3. Once a Picture message has been downloaded to your

phone, the new Picture message displays on the screen. If

the message includes a sound file, the phone begins

playing it.

Images folder.

• Save Sound: Save the sound file included in this message to the

My Sounds folder.

• Save Quick Text: Save the text in this message as a new pre-

composed message text.

Note: For more information on viewing and managing received picture

messages, see “Inbox” on page 53.

• Lock Unlock: Block/permit erasure of the highlighted message.

• Add To Contacts: Save the sender’s number to your Contacts.

• Message Info: Displays message delivery status, addressee, size,

and so on.

• Extract: Calls the sender of the received message.

• Chat view:

–

View Last Message: Displays the most recent message exchanged

with this sender/addressee in Normal mode.

4. Select an option to invoke its function.

Note: For more information on received picture message options, see

–

Add To Contacts: Save the sender’s number to your Contacts.

“Inbox” on page 53.

• Normal view:

Message Boxes

Your phone stores messages in any one of five message boxes.

The subsections that follow describe each message box in detail.

–

Forward: Send a copy of this message to another recipient.

Reply With Copy: (Text Msg only) Compose and send a reply message

to the originator of the received message and include a copy of the

original message.

Inbox

–

Save Quick Text: Save the text in this message as a new pre-

composed message text.

Received messages of all types (except Voicemail) are stored in

the Inbox.

–

Lock Unlock: Block/permit erasure of the highlighted message.

Add To Contacts: Save the sender’s number to your Contacts.

1. In standby mode, press Messages

➔

Inbox. A list of

Message Info: Displays message delivery status, addressee, size, and

so on.

incoming messages displays on the screen.

Tip: While in a call, press Options, then select Messages to open the

–

Extract: Calls the sender of the received message.

Messages menu.

Managing Inbox Messages

1. In standby mode, press Messages

➔

Inbox. A list of

2. Select the message that you wish to view. The contents of

incoming messages displays on the screen.

the highlighted message display on the screen.

2. Highlight a message in the list.

3. While viewing your message press Options and select on of

the following options:

3. Press Erase to remove the highlighted message from the

Inbox.

Messages

4. Press Options and select one of the following:

3. While viewing your message, press Options and select one

of the following:

• Reply: Compose and send a reply message to the originator of the

received message.

• Play Again: (Picture message only) Repeats playback of a sound

file attached to this message.

• Reply With Copy: Compose and send a reply message to the

originator of the received message and include a copy of the

original message.

• Forward: Send the highlighted message to another recipient.

• Erase: (Picture message only) Remove this message from the

Outbox folder.

• Forward: Send a copy of this message to another recipient.

• Lock Unlock: Block/permit erasure of the highlighted message.

• Add To Contacts: Save the sender’s number to your Contacts.

• Save Quick Text: Save the text in this message as a new pre-

composed message text.

• Erase Inbox: Delete all unlocked messages from the Inbox.

• Add To Contacts: Save the recipient’s number to your Contacts.

• Message Info: Displays message delivery status, addressee, size,

and so on.

• Message Info: Displays message delivery status, addressee, size,

and so on.

Outbox

• Extract: Calls recipient of this message.

Your phone stores messages in the Outbox, regardless of

whether the message was successfully transmitted. Verify if and

when a message or Email was successfully received by enabling

the Delivery Ack feature.

Messages and Lock Mode

Your phone can still receive messages while in Lock Mode. The

time and date of the message display on the screen, but you

cannot access the message until you enter the lock code.

Review Messages in the Outbox

Managing Outbox Messages

1. In standby mode, press Messages

sent messages display on the screen.

2. Highlight a message that you wish to review, then press

Open

➔

Outbox. Your list of

1. In standby mode, press Messages

➔

Outbox. Your list of

sent messages display on the screen.

2. Highlight a message, then press Erase to remove the

highlighted message from the Outbox.

View and Edit Draft Messages

3. Press Options and select one of the following:

• Forward: Send the highlighted message to another recipient.

• Resend: Re-send the highlighted message to the original recipient.

1. In standby mode, press Messages

➔

Drafts. A list of any

draft messages that you’ve saved displays on the screen.

• Lock

Unlock: Block/permit erasure of the highlighted message.

2. Highlight a message that you wish to view or edit, then

press

the screen.

Edit. The message creation screen displays on

• Add To Contacts: Save the recipient’s number to your Contacts.

• Erase Outbox: Delete all unlocked messages from the Outbox.

3. Enter or change the recipient’s number and/or Email

address, message subject, and the message text using the

screen. (For more information, refer to “Camera Screen

• Message Info: Displays message delivery status, addressee, size,

and so on.

4. Select an option to perform its function.

Draft Box

4. Press Options to complete the message and set message

send options. Select one of the following:

Messages in the Draft Box are those that have been composed

but never sent. You can return to the Draft Box at any time to

view, edit, or send a draft message.

• Preview (pic msg only): Displays a preview of the message.

• Edit Send To: Displays the Create Txt Msg screen and allows you to

enter another recipient phone number or email address.

Create a Draft Message

1. In standby mode, Messages

Message. The Create Txt Msg screen displays.

2. Enter the phone Number or Email address of a recipient,

then press

➔

Send Message

➔

Text

• Add Quick Text: Inserts a preformatted string of text in the body of

the message.

• Save As Draft: Save the message to your Draft folder.

• Priority Level: Choose High Normal, or Low (picture only).

3. Compose your message using the keypad, then press

Options and select Save As Draft. The message saves to

the Drafts box.

• Validity Period: Allows you to set the length of time your text

messages are stored at the message center while attempts are

made to deliver them.

• Deferred Delivery: Sets a delay time before the phone sends a

message.

Messages

• Delivery Ack: Choose On or Off — Requests confirmation when

4. Press Options and select one of the following:

your message is received.

• Send: Send the highlighted message to the original recipient, if the

recipient’s number and/or Email address is included with the draft

message.

• Add To Contacts: Save the recipient’s number or Email address as

a Contacts list entry.

• Lock Unlock: Block/permit erasure of the highlighted message.

• Remove Pic (Pic Msg only): Remove the picture from your

message.

• Add To Contacts: Save the recipient’s number and/or Email

address to your Contacts.

• Remove Sound (Pic Msg only): Remove the sound file from your

message.

• Save Quick Text: Saves this text to the Quick Text folder as a Quick

Text message.

• Add Slide/Erase Slide (Pic Msg only): Inserts a blank page or

erases the inserted slide in this message.

• Erase Drafts: Delete all unlocked draft messages.

• Cancel Message: End composition of this message. You are

prompted to choose whether to save this message to your Drafts

folder.

Voicemail

New messages in your voice mailbox are indicated by the

voicemail icon ( ) and are logged in the Voicemail box of the

Messages menu. Open the Voicemail box to view the Callback #

(if available), Urgency, and other details of the Voicemail

message.

5. Press

Send when finished composing the message.

Managing Draft Messages

1. In standby mode, press Messages

➔

Drafts. A list of any

draft messages that you’ve composed displays on the

screen.

Listen to Voicemail Now

Once you’ve received a new voicemail message, you have the

option to listen to the message now, or listen to the message

later.

2. Highlight a message.

3. Press Erase to remove the highlighted message from the

Drafts box. At the prompt:

ᮣ

Select one of the following options:

•

Press Yes to erase this draft message.

•

Listen Now: Calls your voice mailbox and allows you to listen to your

Press No to keep this draft message in your Drafts box.

messages.

•

Listen Later: Returns you to standby mode where you can later

• Outbox: Deletes all unlocked messages stored in the Outbox.

choose to call your mailbox and review your messages.

• Drafts: Deletes all unlocked messages stored in the Drafts box.

Listen to Voicemail Later

• All Messages: Deletes all unlocked messages stored in all of the

message boxes, except Voicemail.

If you choose to review your voicemail messages at a later time:

2. Select the messages that you wish to delete. You’re

prompted to confirm the erasure of all messages in the

selected box or in all boxes.

1. In standby mode, press Messages

➔

Voicemail. The

Voicemail screen displays on the screen, showing the

number of new voicemail messages received and the date

and time the latest message was received.

3. Press Yes to delete the messages.

– or –

2. Highlight a voice message.

Press No to cancel deleting the messages.

3. Press

to call your voice mailbox and listen to

the message.

Message Settings

Use the Msg Settings sub-menus to define general settings and

Tip: Press and hold

to dial your voice mailbox.

text message settings.

Erase Messages

Using Erase Messages, you can erase all of the messages in

each of your boxes from one convenient location.

1. In standby mode, press Messages

select the type of message settings General

or Picture Message

General Msg Settings

• Auto Save: Choose whether your messages are saved

automatically when you exit them (On, Off Prompt).

➔

Msg Settings and

Text Message

Note: This function erases all messages in a selected box. To delete a single

message, open the box from the Messages menu, highlight a message,

open the message if you want, then press Erase

• Auto Erase: Choose to automatically erase (On) or not erase (Off)

old received messages after you view them and new messages

require storage space.

1. In standby mode, press Messages

➔

Erase Messages.

The following options display on the screen:

• Quick Text: Allows you to configure the Quick Text messages.

• Inbox: Deletes all unlocked messages stored in the Inbox.

Messages

• Voicemail #: Enter the voicemail number to the voice mailbox

answering this dialed number.

• Entry Mode: Choose the default method for entering text into

messages.

• callback #: Choose whether to include a callback phone number

with your outgoing messages, and enter the number to include.

• Signature: Choose whether to include a text signature in

outgoing message text, and enter the text to include.

• Reminder: Choose a time period to have your phone repeat an

alert, from Once, Every 2 Minutes, Every 15 minutes, or Off for

no reminders

Text Message Settings

• Auto View: Choose to automatically view new messages when

they are received (On) or access new message content later in the

Inbox folder (Off).

• Signature: Choose whether to include a text signature in outgoing

message text, and enter the text to be included.

• Auto Scroll: Choose to automatically scroll through new message

content when received (On) or manually scroll through it (Off).

• Message View: Choose whether to view text messages as a Chat

session or individually (Normal).

Picture Message Settings

• Auto Receive: Automatically receives picture messages without

confirmation.

• Signature: Adds your signature to the Picture Message.

Section 7: Camera

Use your R261 phone to take full color digital pictures, display

them on your phone’s vivid color display, and instantly share

them with family and friends. It’s fun, and as easy to use as a

traditional point-and-click camera. This section explains how you

can do the following:

Taking Single Shots

To take a single picture using the current camera settings, do the

following:

1. In standby mode, press and hold the Camera key (

)

to activate the camera. The message “Please, Wait...

”

•

Take pictures with the phone’s built-in digital camera.

Send pictures to others in Picture messages.

Set the options associated with the camera that help you take crisp,

clear pictures.

displays on the screen followed by a camera view finder

Layout” on page 61.)

Note: You can also activate the camera by pressing

Menu, then

Taking Pictures

selecting Multimedia ➔ Camera.

Taking pictures with the built-in

camera is as simple as launching

the camera, choosing a subject,

pointing the lens (located on the

front of your phone’s flip, near the

hinge), and pressing a button.

2. Using the display as a viewfinder, point the camera lens at

your subject.

3. When the image that you wish

to capture displays on the

screen, press

Take.

4. Press Save to save the picture to

memory.

– or –

Press Cancel to erase the photo.

Camera

2. Press Options. The options

menu bar displays at the top of

the camera screen.

Tip: You can change a number of the camera’s settings to suit particular

uses for your pictures. See “Picture Options” on page 63 for more

information.

3. Highlight Shot Type.

The following Shot Type

options display:

Pictures

When taking pictures of moving subjects or subjects you cannot

pose, such as children and pets, the camera’s Multi Shot mode

simplifies the process of taking multiple pictures in quick

succession. After taking Multi Shot pictures, the camera

automatically displays thumbnail views of the pictures you have

just taken so you can select the best picture(s) and discard the

rest.

•

Single Shot

: Lets you take

1 photo at a time.

Series Shot

: Lets you take

a series of 5 separate photos.

Mosaic Shot

4 or 9 shots.

: Lets you take a 2x2 or 3x3 mosaic photo of

1. In standby mode, press and hold the Camera key (

The message “Please, Wait...” displays on the screen

followed by a camera view finder screen. Your phone is

now in camera mode. (For more information, refer to

“Camera Screen Layout” on page 61.)

Frame Shot

around your photos.

: Lets you select a colorful frame to include

4. Select Series Shot or Mosaic Shot and select the desired

setting.

A Series Shot progress bar (

) or

a Mosaic Shot icon (

while pictures are taken) displays on the screen.

) (which acts as a progress bar

Tip: You can also activate the camera by pressing

Menu, then selecting

Multimedia ➔ Camera.

5. Using the display as a viewfinder, point the camera lens at

your subject.

6. Press

Take when the image that you wish to capture

Camera Screen Layout

displays on the screen. The camera takes one picture

(Single Shot or Frame Shot) or multiple pictures in quick

succession (Series Shot or Mosaic Shot). The picture

displays on the screen.

When you activate your phone’s camera, the bottom portion of

the screen contains menu selections or options while the center

of the screen displays a viewfinder image of the subject at which

the camera is pointed.

Series Shot

Camera Screen Soft Keys

1. Press Done to save the pictures

The soft key labels on the bottom line of the display change to

the following:

to memory.

2. Press Mark

Unmark to select/

•

Gallery: Pressing the Left soft key opens the My Images multimedia

folder so you can view or manage your stored pictures. (See “Gallery”

on page 63 for more information.)

deselect pictures for erasure.

3. Press Erase to discard the

•

Take: Press

to take a picture of the subject.

pictures.

Options: Pressing the Right soft key opens a menu bar of camera

options and settings.

Camera Options

Mosaic Shot

1. Press Save to save the picture

to memory.

The Camera Options let you temporarily adjust default camera

settings to suit available lighting, the subject of the photo, or the

purpose of the photo, for the current camera session.

2. Press Send

(

) to send the

To access Camera Options, do the following:

picture in a picture message.

ᮣ

In camera mode, press Options. The Camera Options

3. Press Cancel to discard the

menu displays, containing the following sub-menus: Single

picture.

Shot: Takes one photo each time you press

Take.

Camera

• Series Shot: Takes a series (

photos automatically or manually when you press

) of

Take

• White Balance: Indicates camera’s white balance setting. (You

can change the camera white balance setting. Selections are:

The number of photos taken depends upon the Series Shot

setting.

–

Auto: The camera automatically adjusts picture quality to available light.

Sunny: Use this setting when taking pictures in full sun.

• Mosaic Shot: Takes multiple shots individually when you

Cloudy: Use this setting when taking pictures in cloudy conditions.

press

Take. The number of shots taken depends upon

Tungsten: Use this setting when taking pictures under incandescent

lights.

the Divided Shot setting. All shots are combined into a single,

mosaic photo.

–

Fluorescent: Use this setting when taking pictures under fluorescent

lights.

• FrameShot: Takes one photo each time you press

Each photo is surrounded by a selected, colorful frame.

Take.

• Color Effect: Changes the effects of your shots. Selections are:

• Resolution: Indicates camera’s current resolution setting. (You

can change the camera resolution setting. Resolution settings

are:

–

Normal: Subjects and pictures display with a normal hue.

Black&White: Subjects and pictures display in black and white.

Sepia: Subjects and pictures display in a brownish-gray hue.

Negative: Subjects and pictures display in inverted colors.

Green: Subjects and pictures display in a greenish hue.

Aqua: Subjects and pictures display in a blue-greenish hue.

–

640 X 480 (pixels)

320 X 240 (pixels)

128 X 96 (pixels)

Note: The Resolution setting affects Zoom capabilities. When Resolution is

• Settings

set to 640 X 480, Zoom is not available. When Resolution is set to any

value lower than 640 X 480, Zoom settings

–

are available.

–

Auto Save

this feature.

Icon Display: Options include:

On activates the Auto Save feature, while Off deactivates

• Night Shot: Lets you take photos in low light.

–

Display All: Displays camera icons.

• Self Timer: Delays the camera shutter for 2, 5, or 10 seconds

Guideline: Displays a cross hatch pattern in the view finder screen.

No Icons: Displays a nearly full-display subject image and without

icons.

after you press

• Quality: Indicates camera’s picture quality setting. (You can

change the picture quality setting. Selections are: SuperFine

Fine, or Normal

–

View Mode: Selections are:

Brightness

Landscape: Your pictures are wider than they are tall.

Portrait: Your pictures are taller than they are wide.

Brightness lets you temporarily lighten the pictures you take.

Increasing the Brightness (-4 – +4) lightens your pictures (0 is

normal).

–

Shutter Sound: makes a sound when you press the Camera key to

take a photo. Selections are: Off Shutter OK, or DingDong

ᮣ

In camera mode, press the Navigation key Left or Right to

adjust the Brightness (the screen image lightens or

darkens to show the affects of your changes).

Reset Settings: Yes resets the camera settings to default values. No

maintains the current camera settings.

Picture Options

After you take a picture, the following options are available (if

Auto Save is set to Off):

Save: Press Save to save this shot.

The next time you press

or darker picture according to your selected Brightness

setting.

, the camera takes a lighter

•

Gallery

Pictures are stored in the My Images folder, which is part of the

phone’s memory and/or card memory devoted to storing, browsing,

and viewing saved pictures. (See “Gallery” on page 63 for more

information.)

Saved pictures are stored in the My Images folder. You can

browse the pictures one at a time (expanded mode), or view

several pictures at once in thumbnail format.

•

Send to someone else by pressing

For a detailed procedure, see “Send Picture Messages in Camera

Mode” on page 48.

Send.

1. In camera mode, press Gallery. Any saved pictures display

on the screen.

Tip: You can also access the My Images folder by pressing Menu and

Cancel to discard the picture.

selecting Multimedia

➔

My Images. (For more information, refer to “My

Images” on page 66.)

Note: If Auto Save is set to On, these options are not available.

After pressing Take, the picture automatically saves.

2. Use the Navigation key to browse pictures in the gallery.

3. Press Options while viewing pictures in the Gallery and

select the desired option to perform the function.

4. Select the automatic save value of your choice. You’re

returned to the camera viewfinder screen.

Camera

•

Send: Send the currently displayed or highlighted picture as a

Picture message.

Set As: Assign the currently displayed or highlighted picture to be

standby screen Main Wallpaper, as a Picture ID for someone in your

Contacts list, or as Front Wallpaper.

Send Pictures

Take a picture and send it to anyone with a compatible device in

a few easy steps.

1. Press

Take in camera mode to take a picture.

•

Erase Images: Erase selected unlocked pictures in the Picture

Gallery. Locked pictures must be unlocked before you can erase

them.

2. Press

Send. The Create Pic Msg screen displays.

3. Enter or Add the recipient’s phone number or Email

address using the keypad.

•

Rename: Rename the currently displayed or highlighted picture.

Lock Unlock: Lock the currently displayed or highlighted picture

4. Press

OK. The address(es) save and the Subject field

so that it cannot be deleted, or unlock the picture so that it can be

deleted.

displays on the Create Pic Msg screen. Use the Navigation

key to move to the other message fields. (For more

information, refer to “Messages” on page 45.)

• Slide Show: View your photos and other images as an automatic

slide show.

5. Press

Send to send the Picture message to the

intended recipients When you are finished composing your

message.

•

Image Info: View the Title, time and date created, size, and

resolution of the currently highlighted or displayed picture.

Switch From Expanded to Thumbnail Mode

1. Highlight a picture that you wish to view full size, then

press

VIEW

2. Press

LIST to return to the thumbnail view of your

photos.

Section 8: Brew

The Brew application allows you to download full featured

applications over the air including games, personalized ring

tones, pictures, and more. You can send and receive instant

messages and email, or browse the web to catch up on all the

latest news.

Note: For more information, contact your Wireless Carrier.

Note: Air time charges may apply. Please check with your Wireless Carrier.

Launching Brew

2. Press Continue and browse.

ᮣ

In standby mode, press

➔

Brew

➔

Brew.

The Brew menu displays on the screen as shown.

Applications Shopping and Downloading (Brew)

Download games, ring tones, e-mail, and more using Mobile

Shop.

Note: For information on airtime charges, contact your Wireless Carrier.

ᮣ

At the Brew menu, highlight MobileShop, then

press Catalog and follow the instructions in your

phone’s display.

➔

Note: Please check with your Wireless Carrier for availability of applications.

Web Browser

Use your phone’s Browser to conveniently surf the web and

download ringtones and wallpapers.

1. In standby mode, press

Get In Web

➔

Browser

➔

Multimedia and Web

Section 10: Tools

This section explains how to use your phone’s productivity

assistance tools and utilities to schedule events, set reminders,

perform calculations, and more.

Bluetooth

Bluetooth is a short-range wireless communications technology

capable of exchanging information over a distance of about 30

feet without requiring a physical connection.

Tools Menu

Tools is a suite of Personal Information Manager (PIM)

applications such as a Calendar, and Memo Pad that run on your

phone. You can use your phone to schedule events, set

reminders, perform calculations, and more with the functions

provided by this useful feature.

Unlike infrared, you don't need to line up the devices to beam

information with Bluetooth. If the devices are within a range of

one another, you can exchange information between them, even

if they are located in different rooms.

The Bluetooth wireless technology settings menu provides the

ability to view and change the device name, show the visibility,

and set the security for the device.

Opening Tools Menu

1. In standby mode, press

Menu ➔ Tools. The Tools

menu displays on the screen.

Turn Bluetooth On/Off

When your phone’s Bluetooth function is turned on, you can use

the Bluetooth features available. When the Bluetooth function is

turned off, you cannot send or receive information via Bluetooth.

Tip: To launch the Tools menu using a voice command — In standby mode,

press and hold

until the phone prompts, “Say a command.” Say

“Go to Tools” into the microphone.

2. Select the desired Tool sub-menu.

To save battery life or in situations where Bluetooth use is

prohibited, such as airline traveling, you can turn off the

Bluetooth wireless technology function.

The following sections provide detailed descriptions of the

Tools and how to use their functions.

(For more information, refer to “Bluetooth Settings” on page 72.)

Registered List

“

Place device you are connecting to in discoverable mode

”

displays on the screen.

Registered List provides a list of

Bluetooth wireless technology

devices previously connected to your

handset.

3. Place the Bluetooth device with which you are connection

in discoverable mode. (For more information, refer to the

device user manual.)

4. Press

. Names of the

ᮣ

In standby mode, press

Menu ➔ Tools ➔ Bluetooth ➔

Registered List. The Bluetooth

screen displays on the screen

showing a list of devices

previously connected to your

device.

available devices display on

the screen.

5. Highlight the device you want

to pair with your phone and

press

selected device with the

phone. Your phone attempts to

automatically connect with the

selected device.

Pair to pair the

Add New Device

To search for available Bluetooth devices:

1. In standby mode, press

Menu ➔ Tools ➔ Bluetooth

➔ Registered List ➔ Add New Device.

Note: If automatic connecting fails, you are prompted to enter the passkey or

PIN for the selected device. (For more information, refer to the device

user manual.)

If Bluetooth is off, you are prompted to “Turn Bluetooth

on?”.

If you are pairing with another handset, both devices prompt you to

accept an automatically generated PIN. To pair the two handsets, press

Yes on both devices.

2. Press Yes to turn Bluetooth on.

– or –

Press No to leave Bluetooth off.

6. The Bluetooth function pairs with the selected device, then

prompts you to confirm that you want to connect with the

device now.

Tools

7. Press Yes to connect with the device now.

• Supported Profiles: Lists and explains the Bluetooth profiles

supported by your phone.

– or –

• Device Info: Displays the Bluetooth Type, Status, and Address of

your phone.

Press No to connect with the device at a later time.

Connecting to a Bluetooth Device

Calendar

From the Registered List,

Calendar lets you view the current, past, or future month in a

monthly calendar layout. While viewing the calendar, the current

date is highlighted and days with scheduled events are

surrounded by a box.

1. In standby mode, press

Menu ➔ Tools ➔ Bluetooth

➔ Registered List.

2. Select the desired device.

View an event

Note: If you are unable to pair with the device a pop-up displays on the

1. In standby mode, press

screen. Press Yes to retry.

Menu ➔ Tools ➔ Calendar.

A calendar displays on the

screen with the current date

highlighted. The month and

year also display.

Bluetooth Settings

1. In standby mode, press

Menu ➔ Tools ➔ Bluetooth

➔ Bluetooth Settings.

2. Select the desired option to perform the related process.

• Enable Disable: Turns Bluetooth on or off.

2. Use the following keys to

navigate your calendar and

highlight a desired date.

• Discovery Mode: Lets other devices “see” (access) your device.

Select On so other devices can see your device, or Off for no

visibility.

•

Use the Left/Right navigation keys to move from one day to another.

Use the Up/Down navigation keys to move from one week to

another.

• Device Name: Displays the handset name. Enter text changes and

press

to save them.

•

Press the Volume Up key to view previous months.

Press the Volume Down key to view future months.

3. Press Options while viewing the calendar to access other

Add a New Event

options:

1. In standby mode, press

Menu ➔ Tools ➔ Calendar.

•

Go to Date: Lets you jump to any date you specify.

A calendar displays on the

screen with the current date

highlighted. The month and

year also display.

Go to Today: Lets you jump to today’s date.

• Weekly: Switches from a full month calendar to a single week

calendar.

•

Erase Old: Lets you erase past events.

2. Highlight the date of the new

Erase All: Lets you erase all events.

event.

Select the desired option to perform

the related process.

3. Press Add. The New Event screen displays on the screen.

4. Use the Navigation key and the keypad to select and enter

details of the event. (For more information, refer to

“Entering Text” on page 30.)

4. Press

to open the

highlighted date. A list of

scheduled events displays on

the screen.

5. Enter the Appointment Name for this event.

5. Select the desired event.

Information for the selected

event displays on the screen.

6. Enter the dates and times for the event using the following

formats:

• Date: mm/dd/yyyy.

• Time: hh:mm.

–

Use the Left and Right navigation keys to change between AM and PM.

7. When you’re finished entering the dates and times,

highlight the Recurrence field and select a recurrence

frequency.

8. Highlight the Alert field and select a type of alert.

Tools

9. Highlight the Reminder field, and set the Reminder to Off

View, Edit, and Erase Memos

1. In standby mode, press

or to select a reminder interval.

Menu ➔ Tools ➔ Memo Pad.

10. Highlight the Alert time field, then select the amount of

A list of your stored memos displays on the screen.

time before the event occurs that you wish to be notified.

2. Highlight the desired memo.

11. Press

alert notifies you prior to the event, if one was selected.

Memo Pad

Save to store the event in your calendar. An

3. To view the memo, press

View.

4. To edit the memo you are viewing, press Edit.

Enter text changes using the keypad. (For more

You can create a notes and store them in Memo Pad. You can’t

prioritize or set an alert for stored notes. Return to Memo Pad

anytime you wish to review and edit your notes.

5. To erase the memo you are viewing, press Options, then

select Erase. You are prompted to verify the erasure.

Add a Memo

1. In standby mode, press

•

Press Yes to erase the memo.

Menu ➔ Tools ➔ Memo Pad.

Press No to keep the memo.

If you have any stored memos, a list of memos display on

the screen. If this is your first time to view the Memo Pad,

“No memos” displays on the screen.

Alarm Clock

Your phone has an alarm clock that can be set to go off once, or

daily at a specified time. Once set, the alarm clock is easy to

change or turn off completely.

2. Press Add to add a new memo.

3. Enter memo text using the keypad and press

to save

the memo. (For more information, refer to “Entering Text”

on page 30.)

Note: The alarm doesn’t function when the phone is turned off. If the time for

an alarm that was set for Once has elapsed and the phone is off, the

alarm occurs at the same time on the following day.

1. In standby mode, press

Menu ➔ Tools ➔ Alarm

Clock. The Alarm Clock screen displays on the screen.

2. Press Add and create a new

alarm. A Set Alarm 1 screen

displays the following:

The alarm icon remains at the top of the display under

these conditions:

–

If the alarm was set as a Daily alarm.

•

Alarm

If the alarm was set as a Mon.-Fri. alarm.

If the alarm was set as a Weekends only alarm.

Time

Frequency

Ringer

The alarm icon does not display at the top of the screen if:

–

The alarm was set as a Once only alarm.

3. Highlight the options you wish

to change, then select values

for the options.

Turn Off the Alarm

Turning off an Alarm stops it from sounding when the set time is

reached while retaining the Alarm settings for your reuse.

Use the keypad to enter the Time for the alarm.

4. Press

values for the alarm. The Alarm Clock icon (

at the top of the screen.

when you’re finished entering and selecting

1. In standby mode, press

Menu ➔ Tools ➔ Alarm

) displays

Clock.

2. Highlight an Alarm.

Note: If you have enabled Bluetooth on your phone, the Bluetooth icon blocks

3. Press Options and select Off. The highlighted Alarm is

turned off, but the alarm settings are retained for later

reuse.

the Alarm Clock icon.

When an Alarm Sounds

Alarm Options

An animated alarm clock displays on the screen with the options

Snooze or Dismiss, and an alert sounds when the specified time

for the alarm arrives.

Resetting one or all Alarms erases all of your Alarm settings and

restores the default settings.

1. In standby mode, press

Menu ➔ Tools ➔ Alarm

ᮣ

To silence the alarm, select Dismiss.

Clock.

Tools

2. Highlight an existing alarm.

2. Press the Navigation key Left or

Right to display the time zone

and city that you wish to view.

3. Press Options. Select from the following options:

• On Off: Enables or disables the highlighted alarm while retaining

the current settings.

– or –

• Add new alarm: Define a new alarm.

• Erase this alarm: Deletes the highlighted alarm.

• Erase All: Deletes all alarms.

Press Options and select Go to

City, then press the Navigation

key or the Volume key Up or

Down.

World Time

The following time zones/cities

are supported:

World Time lets you view the time of

day or night in another part of the

world. World Time displays time in

the 24 different time zones around

the world.

Denver

Miami

Phonenix

New York

Dallas

Chicago

La Paz

Caracas

Newfoundland BuenosAires Brasilia

Mid Atlantic

Paris

1. In standby mode, press

Menu ➔ Tools ➔ World Time.

A world map displays on the

screen.

Cape Verde

Rome

Lisbon

London

Athens

Moscow

Kabul

Berlin

Istanbul

Helsinki

Tehran

Nairobi

Abu Dhabi

New Delhi

Bangkok

Seoul

Jiddah

Tashkent

Kathmandu

Hong Kong

Adelaide

Wellington

Honolulu

Mumbai

Alma-ata

Beijing

Colombo

Jakarta

Tokyo

Guam

Sydney

Samoa

Okhotsk

Midway

Auckland

•

Press

to enter a decimal point. (Calculator only accepts up to 3

Hawaii

Alaska

SanFrancisco Los Angeles

digits after a decimal point.)

3. Do one of the following:

Press to change the sign for a number to a negative.

•

Press DST On [the DST on icon ( ) displays] to display Daylight

Savings Time (DST) for the displayed time zone or press DST Off to

display standard time.

3. Use the Navigation key to set the type of calculation that

you wish to perform. Your choices are as follows:

•

Up navigation key: [

Left navigation key: [

OK key: [ ] Equals/Total

Right navigation key: [

Down navigation key: [

x] Multiplication

Press Options and select Set as Home Zone to set the displayed

time zone as the home time zone for your phone. You are prompted

to confirm the Home Zone change. Press Yes to save your change.

The Home Zone marker moves to the displayed time zone.

-] Subtraction

+] Addition

•

Press

to keep the displayed time zone as a second, default

÷] Division

time zone. You are returned to the Tools menu.

For nested operations [such as (1.81 + 9.34) / 5.22] and to

calculate powers (such as 3 ), press Operator. The

Press

to discard the displayed time zone and close the World

Time screen. You are returned to the Tools menu.

following options display on the screen:

Calculator

•

(

: Beginning of nested operation

: Ending of nested operation

Power: Raise the current number to the power of your next entry

You can perform calculations,

including addition, subtraction,

multiplication, and division using your

phone.

)

4. Use the keypad to enter the next number in your

calculation.

1. In standby mode, press

Menu ➔ Tools ➔ Calculator.

The Calculator displays on the

screen.

5. Repeat steps 3 and 4 as needed.

6. Press

to perform the calculation and view the result.

to clear your last operation or number entry.

7. Press

2. Enter the first number in your calculation (numbers can be

8. Press Clear to clear all of your entries.

up to 15 digits long).

Tools

•

Area

Stop Watch

You can use this menu to set a stop

watch.

Temperature

To convert a currency, length, weight, volume, area, or

temperature, do the following:

1. In standby mode, press

Menu ➔ Tools ➔ Stop Watch.

1. In standby mode, press

Menu ➔ Tools ➔ Converter.

2. Press

to Start, Stop, and

continue the stopwatch count.

2. Select the conversion feature

to use. The selected

conversion feature screen

displays with the From unit

field highlighted.

3. Press Record at the start of

each succeeding event/lap to

record the completion time for

the previous event/lap.

3. Use the Left and Right

navigation keys to select the

unit to convert From.

4. Press Reset to erase all stop

watch (lap) times recorded.

4. Highlight the From quantity field.

5. Enter the quantity you want converted in the From

quantity field.

Converter

6. Highlight the To unit field and select the units to convert To.

The converted quantity displays in the To quantity field.

The conversion menu provides the following conversion features:

•

Currency

Length

Weight

Volume

Note: Press

to include a decimal point.

Currency — Reviewing/Editing Exchange Rates

7. Press Cancel to discard your changes and return to the

Currency Converter screen.

The Currency Converter includes long-term average exchange

rates as default values. To review and/or change a default

exchange rate to the current exchange rate, do the following:

Currency — Adding Exchange Rates

You can use the Currency Converter to convert from and to

obscure currencies by adding exchange rates for these

currencies. To add a currency and its exchange rate to the

Currency Converter, do the following:

1. In standby mode, press

Menu ➔ Tools ➔ Converter

➔ Currency.

2. Press Rate. The Exchange

Rate list for the USD (U.S.

Dollars) currency displays on

the screen.

1. In standby mode, press

Menu ➔ Tools ➔ Converter

➔ Currency.

2. Press Rate. The Exchange Rate list for the USD (U.S.

3. Highlight the currency

exchange rate you want to

review or change.

Dollars) currency displays on the screen.

3. Press Add. The Add Exchange

Rate screen displays on the

screen with the Base field

highlighted.

ress

Edit to change the

4. Select the Base currency from

highlighted exchange rate.

which to convert.

5. Use the keypad to change the

current exchange rate. (For

more information, refer to

“Entering Numbers” on

page 31.)

5. Highlight the Currency field.

6. Enter an identifier of up to 5

characters for the new

currency. (For more