Samsung MZMTD128HAFV00000 User Manual

Samsung Data Migration v2.0  
Introduction and Installation Guide  
2013. 3 (Rev 2.0.)  
1
Introduction  
The Samsung Data Migration software is designed to help users quickly,  
easily, and safely migrate all of their data – including their current  
operating system, application software, and user data – from their  
existing storage device (e.g. HDD) to their new Samsung SSD.  
Samsung Data Migration software is developed and distributed exclusively  
for owners of Samsung Solid State Drives (SSDs).  
Precautions  
1. When cloning the content of the source drive (e.g. HDD), all data on the  
Target Disk (Samsung SSD) will be deleted and is impossible to recover.  
Therefore, if you have stored any data that you would like to keep on  
the Target Disk, please back it up in advance.  
2. Samsung Electronics assumes no responsibility for any loss of data  
that may occur on the Target Disk in the course of using this software  
and will not be held liable for data recovery services. Even if the  
migration process fails, data contained on the Source Disk is not  
affected.  
Improvements  
Samsung Data Migration v2.0 supports advanced cloning that  
automatically clones your PC data onto your new Samsung SSD,  
regardless of how large the data size is.  
2013. 3 (Rev 2.0.)  
3
System Requirements  
Component  
Requirement  
Windows XP SP2 (32-bit)  
Windows Vista (32/64-bit)  
Windows 7 (32/64-bit)  
Windows 8 (32/64-bit)  
Operating System  
PC Memory (RAM)  
Disk Space  
1 GB or more  
Minimum 10 MB required for installation  
Supported Partition Types  
Supported Languages  
MBR, GPT  
English  
The Source Disk (HDD or SSD) must contain the  
operating system installation  
Source Disk  
The Target Disk must be one of the following:  
Samsung SSD 840 Series  
Target Disk  
Samsung SSD 840 PRO Series  
Samsung SSD 830 Series  
Samsung SSD 470 Series  
2013. 3 (Rev 2.0.)  
4
Limitations  
1. This software only supports the Windows operating systems listed in the  
User Manual.  
2. This software only supports the Samsung SSDs listed in the User Manual.  
OEM storage devices provided through a computer manufacturer or  
supplied through another channel are not supported.  
3. This software will run only if the operating system is installed on the Source  
Disk. It will not function on disks that lack an operating system installation.  
4. If the amount of data stored on the Source Disk exceeds the capacity of the  
Target Disk, cloning will not proceed. The Source Disk (e.g. “C:” drive) must  
consist of at least 20% free space. If more than 80% of the Source Disk is  
filled with data, the cloning process cannot proceed normally. Secondary  
partitions require at least 5 GB of free space.  
5. On systems with two (2) drives or more (e.g. “C:”, “D:”, and “E:” drives) with the  
operating system installed on the “C:” drive, only the first two drives will be  
cloned. The “System” partition that is created during Windows installation is  
automatically replicated.  
6. OEM recovery partitions, generated at the factory by computer  
manufacturers, cannot be replicated.  
7. A difference of a few GB of data capacity between the Source and Target  
Disks is normal after cloning. The software does not copy the files Windows  
automatically generates to manage virtual memory (page files and  
hibernation files).  
8. This software cannot clone encrypted disks. In order to clone an encrypted  
disk, you must first remove the password from the disk.  
9. If the mainboard chipset drivers are not up to date when cloning, this  
software may not function properly.  
10. If there are multiple operating systems installed on the PC (e.g. Windows 7  
is installed on the C drive and Windows 8 is installed on the D drive), the  
cloned disk may not function properly.  
2013. 3 (Rev 2.0.)  
5
11. If the Source Disk is damaged (e.g. the disk has bad sectors), the cloned disk  
may not function properly.  
12. When attempting to clone a disk using this software, it is recommended that  
you close all other programs and free up sufficient memory before cloning.  
13. If you have instant PC recovery software installed on your system, this  
software may not function properly.  
14. If a Source Disk is converted into a dynamic disk, the software may not  
function properly.  
15. The files in the user's Library folder are listed by default on the screen for  
selecting files to exclude during cloning.  
16. To exclude files that are not in the Library folder, you can search for them  
by scanning folders. Program Files, Windows files, and Recycle Bin files are  
not scanned.  
2013. 3 (Rev 2.0.)  
6
All brand and product names are trademarks of their respective companies.  
Design and contents of this manual are subject to change without notice.  
©2013 Samsung Electronics, Co., Ltd. All rights reserved.  

Sony NET MD MDS JB980 User Manual
Seagate Computer Drive ST3750630AS User Manual
Samsung SGH zx10 User Manual
Samsung CURVE 9330 User Manual
Philips EXP 200 User Manual
Philips CD SOUNDMACHINE AZ1022 User Manual
Panasonic SL PD1348 User Manual
Oregon Scientific RMR391PU User Manual
Nokia N85 User Manual
Nokia 6315i User Manual