Samsung GH68 11983A User Manual

* Depending on the software installed or your service provider or country, some of the descriptions

in this guide may not match your phone exactly.

* Depending on your country, your phone and accessories may appear different from the

illustrations in this guide.

Printed in Korea

Code No.:GH68-11983A

World Wide Web

English (AUS). 10/2006. Rev. 1.1

http://www.samsungmobile.com

Use road safety at all times

Do not use a hand-held phone while driving.

Park the vehicle first.

Switch off the phone when refuelling

Do not use the phone at a refuelling point

(service station) or near fuels or chemicals.

Important

safety

Switch off in an aircraft

Wireless phones can cause interference.

Using them in an aircraft is both illegal and

dangerous.

Switch off the phone near all medical

equipment

precautions

Hospitals or health care facilities may be

using equipment that could be sensitive to

external radio frequency energy. Follow any

regulations or rules in force.

Failure to comply with the following

precautions may be dangerous or

illegal.

Interference

All wireless phones may be subject to

interference, which could affect their

performance.

Be aware of special regulations

Accessories and batteries

Meet any special regulations in force in any

area and always switch off your phone

whenever it is forbidden to use it, or when it

may cause interference or danger.

Use only Samsung-approved batteries and

accessories, such as headsets and PC data

cables. Use of any unauthorised accessories

could damage you or your phone and may

be dangerous.

Water resistance

• The phone could explode if the battery is

replaced with an incorrect type.

• Dispose of used batteries according to the

manufacturer’s instructions.

Your phone is not water-resistant. Keep it

dry.

Sensible use

Use only in the normal position (held to the

ear). Avoid unnecessary contact with the

antenna when the phone is switched on.

At very high volumes, prolonged

listening to a headset can damage your

hearing.

Emergency calls

Qualified service

Key in the emergency number for your

Only qualified service personnel may repair

your phone.

present location, then press

Keep your phone away from small

children

For more detailed safety information, see

"Health and safety information" on page 97.

Keep the phone and all its parts, including

accessories, out of the reach of small

children.

•

About this Guide

Your phone is capable of

operating in a 3G

environment, allowing

much greater data

transfer speed, video

streaming, and video

conferencing.

This User’s Guide provides you with

condensed information about how to use

your phone. To quickly learn the basics for

your phone, please refer to “Get started”

and “Step outside the phone.”

In this guide, the following instruction icons

appear:

Indicates that you need to pay

careful attention to the subsequent

information regarding safety or

phone features.

Special

features of your phone

•

Camera and camcorder

ꢀ

Indicates that you can get more

information on the referenced page.

Use the camera module

on your phone to take a

photo or record a video.

→

Indicates that you need to press the

Navigation keys to scroll to the

specified option and then select it.

•

Media player

[

]

Indicates a key on the phone.

Play media files on your

phone. You can enjoy

high quality videos and

music.

For example,

[

]

< >

Indicates a soft key, whose function

is displayed on the phone screen. For

example, <Menu

•

Bluetooth

•

Multimedia Message

Service (MMS)

Transfer media files and

personal data and

connect to other devices

using free, wireless

Send and receive MMS

messages with a

combination of text,

images, video, and audio.

Bluetooth technology.

•

Web browser

•

E-mail

Access the wireless web

to get up-to-the-minute

information and a wide

variety of media content.

Send and receive e-mails

with image, video, and

audio attachments.

Get personal with

photo caller ID

Java

Enjoy Java™-based

embedded games and

download new games.

See who’s calling you

with their very own photo

displays.

Name card

Organizer

Create name cards with

your number and profile.

Whenever introducing

yourself to others, use

this convenient electronic

name card.

Keep track of your daily,

weekly, and monthly

schedule.

View messages ....................................... 21

Use Bluetooth......................................... 22

Switch applications.................................. 24

Use a memory card ................................. 24

Contents

Unpack

Make sure you have each item

Your phone

Enter text

ABC, T9, Number, and Symbol modes

Call functions

Keys, features, and locations

Get started

Advanced calling features

Menu functions

First steps to operating your phone

Install and charge the phone...................... 7

Power on or off......................................... 8

Keys and display ...................................... 8

Access menu functions ............................ 11

Customise your phone............................. 12

Make/Answer calls .................................. 15

All menu options listed

Solve problems

Help and personal needs

Health and safety information

Step outside the phone

Index

105

Begin with your camera, the media player, the

web, and other special features

Use the camera...................................... 15

Play media files ...................................... 16

Browse the web...................................... 18

Use Phonebook....................................... 18

Send messages ...................................... 20

Overview of menu functions

To access Menu mode, press <Menu> in Idle mode.

p. 34

p. 51

p. 67

1 Call Log

4 Browser

8 Messages

Recent Contacts

Missed Calls

Dialled Calls

Received Calls

Delete All

Call Time

Data Volume

p. 34

p. 35

p. 36

BigPond Home

Bookmarks

Enter URL

Browser Profiles

Clear Cache

p. 51

p. 52

p. 53

Create New Message

Inbox

Sent

Outbox

Drafts

Email Inbox

Templates

Voice Mail

Broadcast

p. 67

p. 70

p. 72

p. 73

p. 74

p. 75

p. 76

p. 81

p. 53

5 My Place

Data Call Time

BigPond

FOXTEL

Music

Downloads

Photos

Maps

My Account

p. 53

p. 54

p. 55

p. 36

2 Phonebook

10 Delete All

11 Settings

12 Memory Status

Contact List

Add New Contact

Groups

Speed Dial

My Name Card

Copy All

p. 36

p. 37

p. 38

p. 39

p. 40

p. 41

p. 81

9 Settings

Profiles

p. 81

p. 83

p. 84

p. 85

p. 87

p. 88

p. 92

p. 93

p. 94

p. 95

Display Settings

Time & Date

Phone Settings

Call

Own Number

p. 55

6 My Files

FDN List¹

Service Number¹

Images

Videos

Sounds

Music

p. 55

p. 57

p. 58

p. 59

p. 60

p. 61

10 Settings

11 Memory status

Video Call

Connectivity

Application Settings

Security

p. 41

3 Applications

Games

10 Memory Status

11 Reset Settings

12 Phone Information

Media Player

Alarm

Voice Recorder

Organizer

Calculator

Converter

p. 41

p. 43

p. 44

p. 45

p. 49

p. 50

p. 51

Other Files

Memory Card²

Memory Status

p. 61

7 Camera

1. Available only if supported by

your USIM/SIM card.

2. Available only if a memory card is

inserted.

World Time

PocketNews¹

Unpack

Your phone

Make sure you have each item

Keys, features, and locations

•

Phone

Battery

Travel Adapter

PC Data Cable

PC Link CD

User’s Guide

Flash

Camera key

External display

Earpiece

Memory

card slot

You can obtain various

accessories from your local

Samsung dealer.

Main display

The items supplied with

your phone and the

accessories at your

Samsung dealer may vary,

depending on your country

or service provider.

Camera lens

Application switch key

Navigation keys

(Up/Down/Left/Right)

Confirm key

(Centre)

Video call key

Left soft key

Headset jack

Right soft key

Power on/off/Menu exit key

Delete/Cancel key

Volume keys

Dial key

Alphanumeric keys

Special

function keys

Microphone

Get started

First steps to operating your phone

Install the battery.

Plug the travel

adapter into the

phone.

USIM/SIM card information

When you subscribe to a cellular network, you

receive a plug-in SIM (Subscriber Identity

Module) card loaded with your subscription

details, such as your PIN, and available optional

services. For 3G services, you can purchase a

USIM (Universal Subscriber Identity Module)

card.

Plug the adapter into a standard AC wall

outlet.

Install and charge the phone

Remove the

battery.

Insert the USIM/

SIM card.

When the phone is completely charged

(the battery icon becomes still), unplug

the adapter from the power outlet.

Remove the adapter from the phone.

If the phone is

already on, first turn

it off by pressing

Make sure that the

gold-coloured

contacts on the

card are face down.

and holding [

Get started

Low battery indicator

Switch off

1. Open the phone.

When the battery is low:

•

a warning tone sounds,

2. Press and hold [ ].

the battery low message displays, and

the empty battery icon

blinks.

Keys and display

If the battery level becomes too low, the

phone automatically turns off. Recharge

your battery.

Keys

Make a video call.

Power on or off

Open the application switch

window to access other

applications without exiting the

current application.

Switch on

1. Open the phone.

2. Press and hold [ ].

Do not turn on

the phone

when mobile

phone use is

prohibited.

Perform the function indicated

on the bottom line of the

display.

3. If necessary, enter the

PIN and press

<Confirm>.

In Idle mode, access your

favourite menus directly.

ꢀp. 84

In Menu mode, scroll through

menu options.

In Idle mode, access Menu

mode.

Enter numbers, letters, and

some special characters.

In Menu mode, select a

highlighted menu option or

confirm input.

In Idle mode, press and hold

[

] to access your voicemail

server. Press and hold [ ] to

enter an international call

prefix.

Make or answer a call.

In Idle mode, retrieve numbers

recently dialled, missed, or

received.

Enter special characters.

Press and hold [ ] to activate

or deactivate the Silent profile.

Press and hold [ ] to enter a

pause between numbers.

Delete characters from the

display or return to the

previous menu level.

Adjust the phone volume.

Press and hold to switch the

phone on or off.

In Idle mode, with the phone

open, adjust the key tone

volume. With the phone closed,

press and hold to turn on the

display.

End a call.

In Menu mode, cancel input

and return the phone to Idle

mode.

Press to turn on the camera.

In Camera mode, take a photo

or record a video.

Get started

Display

Layout

Browsing Internet on PC

using the phone as

modem

Icons

display various icons.

Accessing services in a

2.5G (GPRS) network

Text and graphics

display messages,

instructions, and

information you enter.

Accessing services in a

EDGE network

Soft key function

indicators

show the current

functions assigned

to the soft keys.

Select

Back

Accessing services in a 3G

(UMTS) network

Accessing services in a

HSDPA network

Icons

Received signal strength

Voice call in progress

Alarm set

ꢀp. 43

Out of your service area;

you cannot make or

receive voice calls

New message:

•

: SMS

: MMS

Video call in progress

: E-mail

: Voicemail

: Push

Out of your service area;

you cannot make or

receive video calls

: Configuration

message

Access menu functions

Inbox full:

•

: SMS

Use the

soft keys

The roles of the soft keys

vary depending on the

function you are using. The

bottom line of the display

indicates their current role.

: MMS

: E-mail

: Voicemail

: Configuration

message

Select

Back

Call diverting feature

active p. 85

ꢀ

Memory card inserted

p. 25

ꢀ

Profile settingꢀp. 83

•

: Normal

: Meeting

: Car

: Silent

: Outdoor

Press the left

soft key to

select the

highlighted

option.

Press the right

soft key to

return to the

Battery power level

menu level.

Get started

Customise your phone

Select an

option

1. Press a desired soft key.

2. Press the Navigation

keys to move to the

You can change the call

Call ringer

melody

ringtone by changing the

properties of the currently

active sound profile.

next or previous option.

3. Press <Select> or

[Centre] to confirm the

function displayed or

option highlighted.

To change the profile

properties:

1. In Idle mode, press

Menu> and select

4. To exit, choose either of

the following methods:

Settings Profiles

→

2. Scroll to the sound profile

you are using.

•

Press <Back> or [

to move up one

level.

3. Press <Options> and

select Edit

•

Press [ ] to return

to Idle mode.

4. Select Voice Call

Ringtone and select a

ringtone for voice calls.

Use

shortcuts

Press the number key

corresponding to the option

you want.

5. Select Video Call

Ringtone and select a

ringtone for video calls.

6. Press <Options> and

select Save

For the external display:

1. In Idle mode, press

To change the sound profile:

1. In Idle mode, press

Menu> and select

Settings

→

Display

Sub LCD

Settings Profiles

→

2. Select the profile you

want.

2. Select an image type.

3. For Clock, scroll to a

You can set a wallpaper for

the idle screen on each

display.

clock type and press

Idle mode

Wallpaper

<Save>.

For Sub Title, enter a

greeting and press

For the main display:

Save>.

For Images, press

Change> and select an

image. Press [Centre] to

save the image.

1. In Idle mode, press

Menu> and select

Settings

→

Display

Wallpaper

→

2. Scroll to an image folder

3. Select an image.

4. Press <Change>.

4. Press <Set>.

Get started

You can set the Navigation

keys to function as shortcuts

to access your favourite

menus.

You can protect the phone

against unauthorised use

with a phone password. The

phone will require the

shortcuts

Phone lock

password on power-up.

1. In Idle mode, press

Menu> and select

1. In Idle mode, press

Settings

→

Phone

Menu> and select

Settings Security

Change Phone

Password

→

Short Cut

→

2. Select a key.

3. Select a menu to be

assigned to the key.

2. Enter a new 4- to 8-digit

password and press

Confirm>.

You can activate the Silent

profile to avoid disturbing

other people.

Silent

profile

3. Enter the new password

again and press

Confirm>.

4. Select Phone Lock

5. Select Enable

Press and hold [ ] in Idle

mode.

6. Enter the password and

press <Confirm>.

Make/Answer calls

Step outside the phone

To make a voice call:

Begin with your camera, the media player, the

web, and other special features

Make a call

1. Enter an area code and

phone number.

Use the camera

2. Press [ ].

1. Open the phone.

3. To end the call, press [ ].

To make a video call:

Take a

photo

2. In Idle mode, press [

to turn on the camera.

]

1. Enter an area code and

phone number.

3. Aim the lens at the

subject by rotating the

camera lens and make

2. Press [ ].

3. To end the call, press [ ].

any desired adjustments.

1. When the phone rings,

press [ ].

Answer

a call

2. For a video call, press

<Show Me> to allow the

other person to see you.

3. To end the call, press [ ].

4. Press [Centre] or [

]

take a photo. The photo

is saved automatically.

Press [

Adjust the

volume

during a call

5. Press [C] to take another

photo.

Step outside the phone

1. In Idle mode, press

Menu> and select My

Files Images

1. In Idle mode, press

Menu> and select My

Files Videos

View a

photo

Play a video

→

2. Select the photo you

want from the Photos

folder.

2. Select the video you want

from the Videos folder.

Play media files

1. In Idle mode, press [

to turn on the camera.

]

Record a

video

Use these methods:

Copy media

files to the

phone

•

Download from the

wireless web p. 51

2. Press [1] to switch to

ꢀ

Record mode.

•

Download from a

computer using the

optional Samsung PC

3. Press [Centre] or [ ] to

start recording.

4. Press [Centre] or [ ] to

stop recording. The video

is saved automatically.

StudioꢀSamsung PC

Studio User’s Guide

•

Receive via Bluetooth

5. Press [Centre] or [

C] to

ꢀp. 90

record another video.

Copy to a memory card

and insert the card into

the phoneꢀp. 25

1. In Idle mode, press

Menu> and select

Applications Media

Player

2. Press [Centre].

3. Press <Options> and

select Add Folder or

Files

1. From the media player

screen, press [Centre].

Create a

play list

Play media

files

→

2. Select the file you want.

3. During playback, use the

following keys:

•

Centre: pauses or

resumes playback.

Up: opens the play

list.

Left: returns to the

previous file. Moves

backward in a file

when held down.

Right: skips to the

next file. Skips

forward in a file when

held down.

→

4. Scroll to the folder you

want, or press [Centre]

to select the files you

want.

5. Press <Select> or

•

<Add>.

6. Press <Back> to return

to the media player

screen.

•

/ : adjusts the

volume.

4. Press [Down] to stop

playback.

Step outside the phone

Browse the web

Use Phonebook

Using a built-in web browser, you can easily

access the wireless web to get a variety of

up-to-date services and information and to

download web content.

To the phone’s memory:

Add a

contact

1. In Idle mode, enter a

phone number.

2. Press [Centre] and select

In Idle mode, press

Phone

→

New

→

Launch the

web

<BigPond>.

number type.

browser

3. Specify contact

information: First Name,

Last Name, Phone

Number, Email Work,

Email Home, Group,

Homepage, Birthday, and

More Information (Job

Title, Department,

•

To scroll through browser

items, press [Up] or

[Down].

Navigate

the web

•

To select an item, press

<Select> or [Centre].

To return to the previous

page, press <Back> or

Company, Nickname, and

Notes).

To access options, press

Options>.

4. Press <Options> and

select Save to save the

contact.

•

To the USIM/SIM card:

1. In Idle mode, press

Menu> and select

Phonebook My Name

Card

Create and

send a

name card

1. In Idle mode, enter a

phone number.

→

2. Press [Centre] and select

2. Specify your contact

information.

SIM

→

New.

3. Specify contact

information: Name,

Phone Number, Group

(for USIM), and Location

Number.

3. Press <Options> and

select Save to save the

name card.

4. To send the name card,

access My Name Card

again.

4. Press [Centre] to save

the contact.

5. Press <Options> and

1. In Idle mode, press

select Send Business

Find a

contact

Menu> and select

Phonebook Contact

List

Card via

→

a sending

→

method.

2. Enter the first few letters

of the name you want.

3. Select a contact.

4. Scroll to a number and

press [ ] to dial, or

press [Centre] to edit

contact information.

Step outside the phone

Send messages

4. Enter the message text

and press [Centre].

1. In Idle mode, press

Menu> and select

Messages Create

New Message Text

Message

Send a text

message

(SMS)

5. Select Picture or Video

→

or Audio

→

6. Add an image, video clip,

or sound clip.

2. Enter the message text

and press [Centre].

7. Press [Centre].

8. Enter destination

numbers or e-mail

addresses.

3. Enter destination

numbers.

4. Press [Centre] to send

the message.

9. Press [Centre] to send

the message.

1. In Idle mode, press

Send a

1. In Idle mode, press

Send an

e-mail

Menu> and select

Messages Create

New Message

Multimedia Message

multimedia

message

(MMS)

Menu> and select

Messages Create

New Message Email

→

2. Enter the e-mail subject.

2. Enter the message

subject.

3. Move to the Message

field.

3. Select Text

View messages

4. Enter the e-mail text.

When a notification appears:

5. Move to the Attach Files

View a text

message

line.

1. Press <View>.

6. Press <Options> and

2. Select the message from

the Inbox.

select Add Files

Name Card, or Add

V-Calendar

Add

From the Inbox:

1. In Idle mode, press

7. Select images, videos,

sounds, name cards, or

calendar data.

Menu> and select

Messages Inbox

2. Select an SMS message

→

8. Press <Options> and

(

select Attach

9. Press [Centre].

When a notification appears:

View a

multimedia

message

10.Enter e-mail addresses.

1. Press <View>.

11.Press [Centre] to send

the e-mail.

2. Select the message from

the Inbox.

Step outside the phone

Use Bluetooth

From the Inbox:

1. In Idle mode, press

Menu> and select

Messages Inbox

2. Select an MMS message

View a

Your phone is equipped with Bluetooth

technology, enabling you to connect the

phone wirelessly to other Bluetooth devices

and exchange data with them, talk

multimedia

message

(Continued)

→

hands-free, or control the phone remotely.

(

1. In Idle mode, press

Turn on

Bluetooth

Menu> and select

Settings

Connectivity

Bluetooth

2. Select My Phone’s

Visibility On to allow

1. In Idle mode, press

Menu> and select

Messages Email

Inbox

View an

e-mail

→

Activation

→

2. Press <Options> and

select Download to

download new e-mails or

headers.

→

other devices to find your

phone.

3. Select an e-mail or

header.

4. If you selected a header,

press <Options> and

select Retrieve to view

the body of the e-mail.

1. In Idle mode, press

Menu> and select

Settings

Connectivity

Bluetooth

Devices

New Device

1. Access an application,

Phonebook My Files

Calendar Schedule, or

Task

Search for

and pair

with a

Bluetooth

device

Send data

→

Search For

→

2. Select the item you want

to send.

→

3. Press <Options> and

2. Select a device.

select Send Business

3. Enter a Bluetooth PIN or

the other device’s

Card via

Send Schedule via

Send Task via

Bluetooth

4. Select a device.

/Send via/

Bluetooth PIN, if it has

one, and press <OK>.

→

When the owner of the

other device enters the

same code, pairing is

complete.

5. If necessary, enter the

Bluetooth PIN and press

<OK>.

Step outside the phone

1. When a device attempts

1. Press [ ].

Receive

data

Close all

running

applications

to access your phone,

press <Yes> to permit

the connection.

2. Scroll to End All?

3. Press <Yes>.

2. If necessary, press

Use a memory card

<Yes> to confirm that

You can use a memory card to increase your

phone’s memory capacity.

you are willing to receive.

Switch applications

You can switch to other applications from a

menu, without closing the menu screen you

were using.

•

Frequent erasing and

writing will shorten a

card’s lifespan.

Important

memory

card

information

Do not remove a card

from the phone or turn

off the phone while data

is being accessed or

transferred. This could

result in loss of data and/

or damage to the card or

phone.

1. While using a menu,

Switch to an

application

press

[

2. Select an application.

•

Call: opens the dialling

screen.

Available

applications

Messages: accesses the

Messages menu.

•

Do not subject cards to

strong shocks.

BigPond: launches the

web browser.

•

Do not touch card

1. Press the card so that it

is disengaged from the

phone.

Remove the

memory

card

terminals with your

fingers or metal objects.

If dirty, wipe the card

with a soft cloth.

2. Remove the card from

the slot.

•

Keep cards away from

small children or pets.

Using a card adapter and a

USB card reader/writer, you

can read the card on a PC.

Use a card

adapter

Do not expose cards in a

place subject to electro-

static discharge and/or

electrical noise.

1. Insert a memory card

into a card adapter, and

then the adapter into a

card reader/writer.

1. Insert the card into the

card slot, with the label

side face down.

Insert a

memory

card

2. Plug the USB connecter

of the card reader/writer

into the USB port on your

PC.

3. Access the appropriate

memory disk and copy to

and from the card.

2. Press the card until it

locks into place.

Entering a word in T9 mode

1. Press [ ] to [ ] to start entering a word.

Press each key once for each letter.

For example, press [ ], [ ], [ ], [

and [ ] to enter Hello in T9 mode.

Enter text

ABC, T9, Number, and Symbol modes

5],

You can enter text for some features such as

Messages, Phonebook, or Organizer, using

ABC mode, T9 mode, Number mode, and

Symbol mode.

T9 predicts the word that you are typing,

and it may change with each key that

you press.

Changing the text input mode

2. Enter the whole word before editing or

deleting characters.

•

Press and hold [ ] to switch between T9

) and ABC ( ) modes.

Press [ ] to change case or to switch to

Number mode ( ).

Press and hold [ ] to switch to Symbol

mode ( ).

3. When the word displays correctly, go to

(

step 4. Otherwise, press [0] to display

alternative word choices for the keys

that you have pressed.

For example, Of and Me use [6] and [3].

4. Press [ ] to insert a space and enter the

next word.

Using T9 mode

Other T9 mode operations

T9 is a predictive text input mode that

allows you to enter any character using

single keystrokes.

•

Press [1] to enter periods or apostrophes

automatically.

•

Press [ ] to insert a space.

•

Press the Navigation keys to move the

cursor.

Using ABC mode

Press the appropriate key until the character

you want appears on the screen.

Press [C] to delete characters one by

one. Press and hold [

entire display.

C] to clear the

Characters in order displayed

Upper case

Key

Lower case

Adding a new word to the T9

dictionary

This feature may not be available for some

languages.

1. Enter the word that you want to add.

2. Press [0] to display alternative words for

your key presses. When there are no

more alternative words, Spell displays

on the bottom line.

(creating an SMS message with GSM Alphabet

encoding)

3. Press <Spell>.

4. Enter the word you want using ABC

Other ABC mode operations

mode and press <Add>.

•

To enter the same letter twice or to enter

a different letter on the same key, wait

for the cursor to move to the right

automatically or press [Right]. Then,

enter the next letter.

•

Press [ ] to insert a space.

•

Press the Navigation keys to move the

cursor.

Call functions

Advanced calling features

Press [C] to delete characters one by

one. Press and hold [

entire display.

C] to clear the

Making a call

1. In Idle mode, enter the area code and

phone number.

Using Number mode

Number mode enables you to enter

numbers. Press the keys corresponding to

the digits you want.

• Press [

and hold [

• Press and hold [ ] to enter a pause

between numbers.

] to clear the last digit or press

C] to clear the whole display.

Using Symbol mode

Symbol mode enables you to insert symbols.

2. Press [ ].

3. When you want to end the call, press

[

Press

Making an international call

1. In Idle mode, press and hold [

display more

symbols

[Up] or [Down].

0]. The

character appears.

select a symbol

the corresponding

number key.

2. Enter the country code, area code, and

phone number, then press [ ].

clear the entered

symbols

[C].

insert the symbols

<OK>.

Redialling recent numbers

1. In Idle mode, press [ ] to display the

list of recent numbers.

Answering a call

When you receive an incoming call, the

phone rings and displays the incoming call

image.

2. Scroll to the number you want and press

[

Press <Accept> or [ ] to answer the call.

Making a call from Phonebook

Tips for answering a call

Once you have stored a number in

Phonebook, you can dial the number by

•

When Anykey Answer is active, you

can press any key, except for <Reject

selecting it from Phonebook.ꢀp. 36

and [

When Open To Answer is active, you

can simply open the phone. p. 85

Press <Reject> or [ ] to reject a call.

Press [ ] to mute the ringer, or press

and hold [ ] to reject a call.

].ꢀp. 85

You can also use the speed dial feature to

assign your most frequently dialled numbers

•

ꢀ

to specific number keys.ꢀp. 39

•

You can quickly dial a number from the

USIM/SIM card using its location number

assigned when stored.

1. In Idle mode, enter a location number

and press [ ].

Viewing missed calls

If you have missed calls, the screen displays

how many calls you have missed.

2. Scroll through other numbers, if

necessary.

1. Press <View>.

3. Press <Call> or [ ] to make a voice

2. If necessary, scroll through the missed

calls.

call, or [ ] to make a video call.

3. Press [ ] to dial the number you want.

Call functions

Placing a call on hold/Retrieving

Using the headset

Press <Options> and select Hold to place a

call on hold, or press <Resume> to retrieve

the call.

Use the headset to make or answer calls

without holding the phone.

Connect the headset to the jack on the left

side of the phone. The button on the

headset works as follows:

Making a second call

You can make another call if your network

supports this function.

Press

1. Press <Options> and select Hold to put

redial the last call

answer a call

end a call

the button twice.

the button.

the call on hold.

2. Make the second call in the normal way.

3. Press <Options> and select Swap to

and hold the button.

switch between the calls.

4. Press <Options> and select Drop

→

Options during a call

You can access a number of functions during

a call.

Drop Held Call to end the call on hold.

5. To end the current call, press [ ].

Answering a second call

Adjusting the volume during a call

You can answer an incoming call while

already on the phone, if your network

supports this function and you have

Use [

] to adjust the earpiece volume

during a call.

Press [ ] to increase the volume level and

press [ ] to decrease the volume level.

activated the call waiting feature.

ꢀp. 86

1. Press [ ] to answer the call. The first

call is automatically put on hold.

2. Press <Options> and select Swap to

Using In-call options

During a call, press <Options> to access

the following options:

switch between the calls.

3. Press <Options> and select Drop

→

Drop Active Call to end the call on hold.

•

Hold: place the call on hold.

4. To end the current call, press [ ].

Swap: place the current call on hold and

reactivate the call on hold.

Using the speakerphone feature

•

Join: set up a multi-party call by adding

a caller on hold to a currently active call.

You can include up to 5 people on a

multi-party call.

Use the phone as a speakerphone to talk

and listen with the phone a short distance

away.

Press [Centre] and then <Yes> to activate

the speakerphone feature. Press [Centre]

again to switch back to the earpiece.

•

Split: have a private conversation with

one multi-party call participant. The

other participants can converse with

each other. After the private

conversation, select Join to return both

private participants to the multi-party

call.

Switching off the microphone

(Mute mode)

You can temporarily switch off your phone’s

microphone so that the person on the phone

cannot hear you.

•

Drop: disconnect the call currently on

hold or active call.

Press <Mute>. To turn the microphone back

on, press <Unmute>.

Drop Call: disconnect one multi-party

call participant.

Video call: switch to the video call.

Call functions

•

Switch To Phone

Switch To Headset

•

Memo: create a memo.

switch the call to a Bluetooth headset or

hands-free car kit or back to the phone.

To use this feature, you first need to

connect your headset or car kit to the

Using the video call feature

In a 3G (UMTS) service area, your phone

can make or receive a video call, allowing

you to see another person on the screen

during a conversation. The other person’s

phone must support the video call feature.

phone.

ꢀp. 89

•

Mute Key Tone/Unmute Key Tone:

turn the key tones off or on.

To communicate with answering

Making a video call

1. In Idle mode, enter the area code and

phone number.

machines or computerised telephone

systems, Unmute Key Tone must be

selected.

2. Press [ ].

•

New Call: make a new voice call.

Send DTMF: send DTMF (Dual tone

multi-frequency) tones as a group. The

DTMF tones are the tones used in phones

for tone dialling, sounding when you

press the number keys. This option is

helpful for entering a password or an

account number when you call an

automated system, like a banking

service.

Answering a video call

When you receive a video call, answer a

video call as receiving a voice call. Press

<Show Me> to allow the caller to see you.

Using video call options

During a video call, press <Options> to

access the following options:

•

Speaker Off/Speaker On: switch back

to Normal mode or turn on the

speakerphone feature.

•

Phonebook: locate or store contacts in

Phonebook.

Messages: create and send a new SMS

message.

•

Show Call infobar

display or hide the information bar on

the display.

Hide Call infobar

•

Save Contact to: save the contact to

Phonebook.

Create SMS: create and send a new

SMS message.

Hide Information

ShowInformation

hide or display information about the

video call.

Send DTMF: send Dual tone multi-

frequency (DTMF) tones as a group after

entering the entire number you need to

send or retrieving a number from

Phonebook.

•

Mute/Unmute: turn off or on the

microphone.

Display options: change the camera

image settings:

•

Memo: create a memo.

Effects: change the colour tone of the

Record video call/Stop video call:

image.

record the video call or stop recording.

Quality: change the image quality of the

camera.

•

Switch to voice: switch to the voice

call.

Brightness: adjust the image

End Call: disconnect the video call.

brightness.

•

Zoom: display the zoom control bar and

zoom in or out by pressing [Left] or

[Right].

•

Settings: change the settings for the

video call.

Phonebook: locate or store contacts in

Phonebook.

Using call log options

Menu functions

While viewing call details, press <Options

All menu options listed

to access the following options:

•

Voice Call: make a voice call to the

number.

Call Log (Menu 1)

Use this menu to view the calls you have

dialled, received, or missed, the length of

the calls.

Video Call: make a video call to the

number, if the 3G service is available.

Use Number: paste the selected

number to the normal dialling screen.

To access this menu, press <Menu> in Idle

mode and select Call Log

Save to Phonebook: save the number

to Phonebook.

Send Message: send a message to the

selected number via SMS or MMS.

Recent Contacts (Menu 1.1)

This menu displays all of the calls you have

dialled, received, or missed.

Delete: delete the selected call log or all

logs.

Accessing a call log

1. Press [Left] or [Right] to move to

another call type.

Missed Calls (Menu 1.2)

This menu displays the most recent calls you

did not answer.

2. Press [Up] or [Down] to scroll through

the call list.

Dialled Calls (Menu 1.3)

3. Press [Centre] to view the details of a

call, or [ ] to dial a number.

This menu displays the most recent calls you

have dialled.

•

Total Received: check the total length

of calls received.

Received Calls (Menu 1.4)

This menu displays the most recent calls you

have received.

Total Time: check the total length of

calls made and received.

Delete All (Menu 1.5)

Reset Timers: reset all counters. You

need to enter the phone password.

Use this menu to delete all logs in each call

type.

You can change this password.ꢀp. 94

1. Press [Centre] to select the call types to

be cleared.

Data Volume (Menu 1.7)

2. Press <Delete>.

Use this menu to view the total amount of

sent or received data.

3. Press <Yes> to confirm the deletion.

4. Enter the phone password and press

•

Recent Volume: check the last amount

of data you have sent.

<Confirm>.

You can change this password.ꢀp. 94

Total Volume: check the total amount

of data you have received.

Reset Volume: reset all counters. You

need to enter the phone password. s

Call Time (Menu 1.6)

This menu displays the time log for voice

and video calls made and received. The

actual time invoiced by your service provider

will vary.

You can change this password.

ꢀp. 94

•

Last Call Time: check the last call time.

Total Dialled: check the total length of

calls dialled.

Menu functions

Data Call Time (Menu 1.8)

Phonebook (Menu 2)

This menu displays the time log for data

calls made and received.

You can store phone numbers on your USIM/

SIM card and in your phone’s memory. The

USIM/SIM card and phone’s memory are

physically separate, but they are used as a

single entity called Phonebook.

•

Recent Time: check the last data call

time.

Total Time: check the total length of

data calls sent and received.

To access this menu, press <Menu> in Idle

mode and select Phonebook

Reset timers: reset all counters. You

need to enter the phone password.

Contact List (Menu 2.1)

You can change this password.ꢀp. 94

Use this menu to search for contact

information in Phonebook.

Finding a contact

1. Enter the first few letters of the name

that you want to find.

2. Select the name you want from the list.

3. Scroll to a number and press [ ] to

dial, or press [Centre] to edit contact

information.

Using contact options

While viewing contact details, press

<Options> to access the following options:

•

Edit: edit contact information.

•

Send Message: send a message to the

selected number or e-mail address via

SMS, MMS, or e-mail.

Add New Contact (Menu 2.2)

Use this menu to add a new contact to

Phonebook.

Special Options: set the following

options:

Storing a contact to the phone’s

memory

Picture: assign a caller ID image to alert

you to a call from the person.

1. Select Phone

2. Change the settings or enter information

about the contact:

Ring Tone: assign a ringtone to alert

you to a call from the person.

•

First Name/Last Name: assign a

name.

Phone Number: add a phone

number.

Email Work: assign a business

e-mail address.

Email Home: assign a personal

e-mail address.

Group: assign a caller group.

Homepage: enter a homepage

address.

Birthday: enter the person’s

birthday.

More Information: enter the job

title, department, company,

nickname, and additional note of the

person.

Msg. Alert Tone: select a ringtone to

alert you to an incoming message from

the person.

•

Add to Speed Dial: set the selected

number as a speed dial entry.

Video Call: make a video call to the

number, if the 3G service is available.

Copy to SIM/Copy to phone: copy the

contact from the phone’s memory to the

USIM/SIM card, or vice versa.

•

Send Business Card via: send the

contact via SMS, e-mail, or Bluetooth.

•

Use Number: paste the selected

number to the normal dialling screen.

Delete: delete the contact.

Menu functions

3. Press <Options> and access the

following options to add additional

information:

•

Location Number: enter a location

number.

3. If you are using a USIM card, press

Options> to add additional

information:

•

Special Options: assign a caller ID

image, call ringer, or message ringer

for the contact.

•

Add Item: add information type to

the contact.

Delete Item: remove the selected

type from the contact.

•

Add Item: add a phone number in

any type to the contact.

Delete Item: remove the selected

number type from the contact.

Change Type: change the number

type from the contact.

•

4. Press [Centre] to save the contact.

Groups (Menu 2.3)

4. Press <Options> and select Save to

Use this menu to organise your contacts in

caller groups.

save the contact.

Storing a contact to the USIM/SIM

card

Creating a new caller group

1. Press <Options> and select Add

1. Select SIM

Group

2. Enter information about the contact:

2. Enter a group name and press <Save>.

•

Name: assign a name.

Phone Number: add a phone

number.

Adding members to a caller group

1. Select a group.

•

Group: (For USIM) assign a caller

group.

2. Press [Centre] to select the contacts to

be added.

3. Press <Save>.

3. Select a number.

Managing caller groups

From the group list, press <Options> to

access the following options:

Managing speed dial entries

From the Speed dial screen, press

•

View Members: display the members of

the selected group.

<Options> to access the following options:

•

Add: assign a number to an unassigned

key.

•

Add Member: add contacts to the

selected group, if the group does not

have any.

•

Details: check the name and number

assigned to a key.

•

Add Group: add a new group.

Video Call: make a video call to the

number assigned to a key.

Rename Group: change the group

name.

Change: assign a different number to a

key.

•

Delete: delete the selected group or all

groups. Group members, however, will

not be deleted from Phonebook.

Remove: clear the speed dial setting for

a key.

Speed Dial (Menu 2.4)

Dialling speed dial numbers

In Idle mode, press and hold the appropriate

key.

Use this menu to assign speed dial numbers

(2 to 9) to 8 of your most frequently dialled

numbers.

My Name Card (Menu 2.5)

Assigning speed dial numbers

Use this menu to create your name card and

send it to other people.

1. Select a key location from

9. Key

is reserved for your voicemail server.

2. Select a contact from the contact list.

Menu functions

Saving your name card

FDN List (Menu 2.8)

The procedure for creating your name card

is the same as the one for saving a phone

Use this menu to create a list of contacts to

be used in FDN (Fixed Dialling Number)

mode, in which the phone allows outgoing

calls only to the specified phone numbers.

This menu is available if your USIM/SIM card

supports the FDN feature.

number in the phone’s memory.ꢀp. 37

Using name card options

After saving your name card, press

<Options> to access the following options:

You can activate FDN mode in the Fixed

•

Edit: edit the name card.

Dialing Mode menu.ꢀp. 94

•

Send Business Card via: send the

name card via SMS, e-mail, or Bluetooth.

Adding a contact

1. Press <Options> and select New

•

Delete: delete the name card.

2. Enter your PIN2 supplied with your

USIM/SIM card and press <Confirm>.

Copy All (Menu 2.6)

3. Enter information about the contact:

Use this menu to copy all of the contacts

stored on the USIM/SIM card to the phone’s

memory, or vice versa.

•

Name: assign a name.

Phone Number: add a phone

number.

Own Number (Menu 2.7)

•

Location: assign a location number.

Use this feature to check your phone

numbers, or to assign a name to each of the

numbers. Changes made here do not affect

the actual subscriber numbers on your

USIM/SIM card.

4. Press [Centre].

Using contact options

From the FDN list, you can access the same

contact options as in Phonebook by pressing

<Options>.ꢀp. 36

Service Number (Menu 2.9)

Applications (Menu 3)

Use this menu to view the list of Service

Dialling Numbers (SDN) assigned by your

service provider, including emergency

numbers and numbers for directory

enquiries. This menu is available if your

USIM/SIM card supports SDN.

Use this menu to play music and video files

stored in your phone’s memory or a memory

card. You can also keep track of your

schedule, set alarms, and use convenient

features, such as a world clock, a voice

recorder, calculator, and converter.

Scroll to the number you want and press

To access this menu, press <Menu> in Idle

[

mode and select Applications

Settings (Menu 2.10)

Media Player

Use this menu to change the default settings

for Phonebook entries.

You can play music and video files.

Downloading or receiving music or

video files

•

Viewing Settings: change the sort

order of the contact list.

You can play the following types of files on

your phone:

•

Default Storage Settings: select a

default memory location for saving

contacts. If you select Optionally, the

phone will ask you to select a memory

location each time you save a number.

•

Music: MP3, AAC

Video: MP4, 3GP, RM

Use the following methods to save music or

video files to your phone’s memory:

Memory Status (Menu 2.11)

•

Download from the wireless web

ꢀp. 51

Use this menu to check the number of

contacts you have stored in the phone’s

memory and on the USIM/SIM card.

Download from a computer using

Samsung PC StudioꢀSamsung PC

Studio User’s Guide

Menu functions

•

Receive via an active Bluetooth

connection p. 90

Copy to a memory card and insert the

card into the phone p. 25

During playback, use the following keys:

Key Function

Centre Pauses or resumes playback.

ꢀ

•

ꢀ

Downloaded or received files are stored in

the Downloads folder in Music or Videos

Left

Returns to the previous file.

Moves backward in a file when

held down.

Creating a play list

Right

Skips to the next file. Moves

forward in a file when held down.

Add the media files to the play list so you

can play them.

1. From the media player screen, press

[Centre].

Opens the play list.

Adjusts the volume.

Stops playback.

2. Press <Options> and select Add

Down

3. Select Folder or Files

4. Scroll to the folder you want or press

[Centre] to select the files you want.

Using media player options

From the media player screen, press

5. Press <Select> or <Add>.

<Options> to access the following options:

6. Press <Back> to return to the media

•

Play: play the selected file.

player screen.

•

Resume: resume playback.

Playing media files

•

Send via: send the file via MMS, e-mail

1. From the media player screen, press

[Centre].

or Bluetooth.

•

Add to Play List: add files to the play

2. Select a file. The file plays.

list.

•

Open Play List: access the play list.

•

Move: move the selected file to the

position you want within the current play

list or another play list.

Go to My files: access all music and

video files.

•

Copy: make a copy of the selected file in

the current play list or another play list.

•

Details: access the file properties.

Player Settings: change the default

settings for playing media files:

New List: add a new play list.

Play Options: select a repeat mode.

Volume: select a volume level.

Alarm

Use this menu to set alarms to sound at

specific times. The alert type for a normal

alarm corresponds to the call alert type

settings in the currently selected profile. A

wake-up alarm is not be affected by your

profile setting.

Audio Player Skin: select a skin image.

•

VOD Settings: select a connection

profile to be used for accessing a video

streaming server. You can also create or

edit a profile.ꢀp. 91

Set as Ringtone: set the file as your

ringtone for voice calls or video calls.

Setting an alarm

1. Select the type of alarm.

2. Set each alarm option:

Using play list options

From the media player screen, press [Up].

Press <Options> to access the following

options:

•

Alarm: activate the alarm.

Time: enter the time for the alarm to

sound.

•

Play: play the selected file.

•

Repeat: select a repeat option.

Alert Tone: select an alarm tone.

Add: add files to the play list.

Remove: remove the selected file or all

files from the current play list.

3. Press <Options> and select Save

Menu functions

4. Press [Centre] to review the memo, or

press [Up] to record additional memos.

Stopping an alarm

When the time for an alarm comes and the

alarm sounds:

Playing a voice memo

1. From the voice recorder screen, press

•

For a non-wake-up alarm, press any key.

For a wake-up alarm, press <OK> or

[Centre]. Press any key, except for

<Options> and select Go to Sounds.

2. Select a voice memo from the Voice

<OK> and [Centre], to cause it to sound

Memos folder. The memo plays.

again after 5 minutes.

During playback, use the following keys:

Deactivating an alarm

Key

Function

1. Select the alarm you want to deactivate.

2. Select Off on the Alarm line.

3. Press [Centre].

Centre

Left

Pauses or resumes playback.

Returns to the previous file.

Moves backward in a file when

held down.

Voice Recorder

Use this menu to record voice memos. A

voice memo can be up to one hour long.

Right

Skips to the next file. Moves

forward in a file when held down.

Recording a voice memo

Adjusts the volume.

1. Press [Centre] to start recording.

2. Speak into the microphone.

Down

Stops playback.

Using voice recorder options

Press [Centre] to pause or resume the

recording.

After playback, press <Options> to access

3. Press <Stop> or [Down]. The voice

the following options:

memo is saved automatically.

•

Play: play the selected voice memo in

Review mode.

•

Record: record a new voice memo.

Selecting a day on the calendar

Send via: send the file via MMS, e-mail,

or Bluetooth.

When you enter the Calendar menu, the

calendar appears with today’s date indicated

by a colured box.

•

Set as Ringtone: set the file as your

ringtone for voice calls or video calls.

•

Press [Left] or [Right] to move by day.

Press [Up] or [Down] to move by week.

Go to Sounds: access the voice memo

list.

Press [

] to move by month.

•

Rename: change the file name.

Delete: delete the file.

Creating an item

You can store scheduled items,

anniversaries, tasks, and memos on the

calendar. More than one item per day can be

stored.

Details: access the file properties.

Record Settings: customise the default

settings for the voice recorder:

Default Name: change the default

prefix of file names.

To enter a scheduled item:

1. Select a date on the calendar.

Recording Time: select a maximum

recording time.

2. Press <Options> and select New

Schedule

3. Enter information or change the settings:

→

Organizer

•

Title: enter the title for the

scheduled item.

The Organizer feature enables you to keep

track of your schedule.

•

Details: enter the details of the

scheduled item.

Calendar

Use this menu to keep track of your

schedule.

Menu functions

•

Start and End: enter the starting

and ending times for the scheduled

item.

Start Date and End Date: enter the

starting and ending dates for the

scheduled item.

Location: enter information about

the scheduled item.

Alarm: set an alarm for the

scheduled item.

Before: set how long before the

scheduled item the alarm is to alert

you.

3. Enter information or change the settings:

•

Occasion: enter information about

the anniversary.

•

Date: enter the date.

Alarm: set an alarm for the

anniversary.

•

Before: set how long before the

anniversary the alarm is to alert you.

Alarm Time: enter the time for the

alarm to sound.

Repeat Every Year: set the phone

to remind you of the anniversary

every year.

•

Repeat: set the scheduled item to

recur. You can select a repeat unit.

Until: set the ending date, if the

scheduled item will recur.

Expiry: change the expiry setting.

4. Press <Options> and select Save to

save the anniversary.

To enter a task:

1. Select a date on the calendar.

2. Press <Options> and select New

Task

3. Enter information or change the settings:

→

4. Press <Options> and select Save to

save the scheduled item.

To enter an anniversary:

•

Title: enter the title for the task.

Task: enter the task content.

Start Date: enter the starting date.

Due Date: enter the ending date.

1. Select a date on the calendar.

2. Press <Options> and select New

Anniversary

→

•

Priority: select a priority level.

2. Select an item to view its details.

4. Press <Options> and select Save to

From the item list, press <Options> to

access the following options:

save the task.

To enter a memo:

•

View: access the item.

1. Select a date on the calendar.

New: add a new item.

2. Press <Options> and select New

Memo

→

Completed/To Do: change the status of

the selected task.

3. Enter the memo text and press [Down].

4. Enter the date.

•

Month View: switch to the monthly

view screen.

Week View: switch to the weekly view

screen.

5. Press <Options> and select Save to

save the memo.

Change Date/Change Due Date/

Reschedule: change the date of the

Consulting the calendar

Once you have scheduled items, the square

brackets appear on the corner of the date

cell.

item.

•

Delete: delete the selected item or all of

the items for the selected day.

Viewing an item

Send Schedule via/Send Task via:

send the item via SMS, e-mail, or

Bluetooth.

1. Select a date on the calendar to display

the items for the day. The following icons

indicate the type of item:

•

Send Memo: send the memo via SMS.

•

Scheduled items

Anniversaries

Tasks

Memos

Menu functions

Using calendar options

Schedule

On the calendar, press <Options> to access

the following options:

This menu displays the scheduled items. If

you have set the Repeat and Alarm options,

the

and

icons display.

•

View: display the items stored for the

selected date.

Select a scheduled item to view its details.

•

New: add a new item.

Anniversary

Week View: display the weekly view

screen.

This menu displays anniversaries you have

created. If you have set the Repeat and

Alarm options, the

•

Go to Today: go to today’s date.

and

icons display.

Go to Date: enter a specific date.

Select an anniversary to view its details.

Starting Day: set whether the calendar

starts with Sunday or Monday.

Task

•

Delete: delete the items for the specific

period or all of the items in the calendar.

Use this menu to display tasks you have

created. The icons on the right indicate the

importance; the lower the number on the

icon, the higher the priority. A check mark

appears in the status check box if the task

has been completed.

Week View

You can view items for the selected week. A

coloured box on the timetable indicates the

presence of a scheduled item. Select a box

for the date you want.

Select a task to view its details.

Memo

Today’s Event

This menu displays the memos you have

created.

You can view items for the selected date.

Select an item to view its details. The item

opens in Edit mode.

Select a memo to view its details.

4. Press [Centre] to view the result.

Missed Event Alarm

5. If necessary, repeat from step 2 to

continue the calculation.

When you are unable to acknowledge an

alarm for an item, the phone stores the

missed alarm until you confirm it.

Using calculator options

1. Select an item.

Press <Options> to access the following

options:

2. Press <Confirm> to confirm and delete

the item.

•

Equal: view the result.

Memory Status

Recent Calculation: display the last

result you calculated.

This menu displays the number of items of

each type you have created, and the total

number of items you can store.

•

Save to Memory: save a value into the

calculator memory.

Recall Memory: retrieve the saved

value.

Calculator

Use this menu to perform basic arithmetic

functions such as addition, subtraction,

multiplication, and division.

Clear Memory: clear the saved value.

Converter

Use this menu for common conversions,

such as currency and temperature.

Performing a calculation

1. Enter the first number.

Press [ ] to include a decimal point.

Performing a conversion

2. Press one of the Navigation keys to

access the math function you want.

1. Select a converter.

2. Press [Left] or [Right] to select the

original unit and press [Down].

3. Enter the second number.

Menu functions

3. Enter the value to be converted and

press [Down].

Setting the local time zone

1. From the world map, press [Left] or

[Right] to scroll to the city you want on

•

Press [ ] to insert a decimal point.

Press [ ] to change the temperature

to above zero (+) or below zero (-).

the upper line (

). As the time line

moves, the time and date of the given

zone display.

4. Press [Left] or [Right] to select the unit

to which you want to convert.

2. Press [Centre] to save the city as your

local time zone.

The equivalent value for the amount you

entered displays.

Viewing world time

1. From the world map, move to the lower

line ( ).

Using converter options

Press <Options> to access the following

options:

2. Press [Left] or [Right] to scroll to the city

you want.

•

Clear: clear the current values.

3. Press [Centre] to save the time zone.

Reverse: reverse the conversion.

Currency Rates: display the currency

rate list.

Applying daylight saving time

1. From the world map, press <Options

and select Summer Time

World Time

2. Press [Centre] to select the time zones

you want.

Use this menu to set your local time zone

and find out the current time in another part

of the world.

3. Press <Select>.

4. Press [Centre] to save the time zone.

PocketNews

BigPond Home (Menu 4.1)

This menu is available if you use a USIM/SIM

card that supports SIM Application Toolkit

menus and provides additional services,

such as news, weather, sports,

entertainment, and location services.

Available services may vary, depending on

your service provider’s plans.

Use this menu to connect your phone to the

network and load the homepage of the

wireless web service provider.

Navigating the web browser

Press

scroll through

browser items

[Up] or [Down].

For details, see your USIM/SIM card

instructions or contact your service provider.

select a browser item

<Select> or

[Centre].

Browser (Menu 4)

return to the previous

page

<Back> or [C].

The web browser on your phone allows you

to access the wireless web. Using the web

browser, you can access up-to-date

information and a wide variety of media

contents, such as wallpapers, ringtones, and

music files.

Using browser options

From any web page, press <Options> to

access the following browser options:

•

Home: return to the homepage.

To access this menu, press <Menu> in Idle

mode and select Browser

Go To: go to the currently linked web

page.

•

Go: move backward or forward through

pages in history.

Reload: reload the current page with

updated information.

Menu functions

•

To Desktop View

change the display mode of the browser.

To SmartFit View

Prompt, the phone will ask you to save

the cookies of the current page.

•

Bookmarks: bookmark the current

page or access the bookmark list.

Preferences: change the settings for

the web browser to suit your preference.

Enter URL: enter a URL address

manually.

Certificates: access certificate

information.

Send URL via: send the URL of the

current page via SMS or e-mail.

Page Properties: access the page

properties.

Save: save the image of the current web

page or the current page.

About Browser: access version and

Saved Pages: access the list of web

pages you have saved.

Exiting the web browser

Press [ ] to end the network connection

and exit the browser.

History: access the list of web pages

you have accessed.

Bookmarks (Menu 4.2)

Advanced: change the various settings

for the browser.

Use this menu to save URL addresses in

order to quickly access web pages, or access

the preset bookmarks.

Empty Cache: clear the cache. The

cache is a temporary memory site that

stores recently accessed web pages.

Adding a new bookmark

1. Press <Options> and select Add

Empty Cookies: delete cookies. Cookies

are pieces of personal information sent

to a web server while navigating the

web.

Bookmark

2. Enter a title and press [Down].

Cookie Options: set whether or not

3. Enter a URL address and press <Save>.

cookies are stored. If you select

Using bookmark options

Browser Profiles (Menu 4.4)

From the bookmark list, press <Options

to access the following options:

Use this menu to select a connection profile

to be used for connecting to the Internet.

You can also create or edit a profile.

ꢀp. 91

•

Go To: access the bookmarked web

page.

Clear Cache (Menu 4.5)

Enter URL: enter a URL address

manually.

Use this menu to clear the cache. The cache

is a temporary memory site that stores

recently accessed web pages.

Edit: edit the URL address and title of

the bookmark, if you selected an added

one.

•

Add Bookmark: add a new bookmark.

My Place (Menu 5)

The My Place menu enables you to use

various Internet services supported by your

service provider.

Send URL via: send the URL address of

the bookmark via SMS or e-mail.

•

Delete: delete the selected bookmark or

all bookmarks.

To access this menu, press <Menu> in Idle

mode and select My Place

Delete All: delete all bookmarks.

Enter URL (Menu 4.3)

BigPond (Menu 5.1)

Use this menu to manually enter a URL

address and access the associated web

page.

Use this menu to access a range of mobile

entertainment from the BigPond homepage,

only available on Telstra’s Next G network.

For further details, please refer to your Next

G User Guide.

You can add the entered URL to the

Bookmark list by selecting Add Bookmark

Menu functions

FOXTEL (Menu 5.2)

Music (Menu 5.5)

Use this menu to access the online TV

Use this menu to access the BigPond Music

Player and download music files. For further

details, please refer to your Next G User

Guide.

service supported by your service provider.

You can watch TV and use various Mobile TV

services. Using this link, you can access to

watch 12 exclusive FOXTEL channels on your

phone wherever you are. For further details,

please refer to your Next G User Guide.

Downloads (Menu 5.6)

Use this menu to access the website preset

by your service provider and have

entertainment at your fingertips to

download. Download and watch music

videos, movie trailers, ringtones and much

more with Download Manager. For further

details, please refer to your Next G User

Guide.

Search (Menu 5.3)

Use this menu to access the Internet on

your phone and launch the Telstra search

engine. For further details, please refer to

your Next G User Guide.

Email (Menu 5.4)

Photos (Menu 5.7)

Use this menu to access the E-mail service

supported by your service provider. With

your Telstra’s Next G mobile, you can check

your BigPond, Hotmail, Yahoo! Mail and

other Internet provider e-mail accounts,

wherever you are, whenever it suits you. For

further details, please refer to your Next G

User Guide.

Use this menu to access the website preset

by your service provider and download

pictures. You can shoot, store, view, and

share photos with your family and friends,

wherever you are, from your mobile or PC.

For further details, please refer to your Next

G User Guide.

Maps (Menu 5.8)

My Files (Menu 6)

Use this menu to access a location service

based on GPS positioning technology. With

access to Whereis Mobile on your phone, you

can quickly find your way to any location

around Australia. For further details, please

refer to your Next G User Guide.

The My Files menu allows you to access

images, videos, music files, and sounds

stored in the phone’s memory or on a

memory card.

To access this menu, press <Menu> in Idle

mode and select My Files

As a result of the Digital Rights Management

(DRM) system, some of the media items you

download from the Internet or receive by

MMS may require a licence key to access

them.

My Account (Menu 5.9)

Use this menu to manage your Telstra

Accounts. View and pay your Telstra bills,

manage your content subscriptions and

more. For further details, please refer to

your Next G User Guide.

Images

Use this menu to access photos you have

taken and images you have downloaded,

received in messages, or imported from your

computer.

Viewing an image

1. Scroll to an image folder.

2. Select an image.

Menu functions

•

Rotate: rotate the photo clockwise

or counterclockwise.

Flip: flip the photo vertically or

horizontally.

Crop: select a variously sized and

shaped section of the photo.

Viewing a slide show

You can view your images as a slide show, a

sequential presentation of each image in the

current folder.

1. While viewing an image, press

<Options> and select Slide Show. The

3. When you have finished, press <Done

or press <Options> and select Done

4. Press [Centre]

slide show begins.

2. Press <Back> to stop the slide show.

Editing an image

1. While viewing an image, press

5. Enter a photo name and press <Save>.

Using image options

<Options> and select Edit.

2. Press <Options> and edit the photo

While viewing a file, press <Options> to

access the following options:

using the following options:

•

Save as: save the file as a different

name.

•

Send via: send the file via MMS, e-mail,

or Bluetooth.

•

Resize: change the image size.

Effects: change the colour tone or

apply a special effect to the photo.

Adjust: adjust the brightness,

contrast, or colour balance.

Frames: apply a decorative frame.

Cliparts: add an image clip to the

photo.

Set as: set the image as your wallpaper

for the main display or a caller ID image

for a Phonebook entry.

•

Move: move the file to another folder.

Copy: copy the file to another folder.

•

Real Size: view the image in its actual

size. Press <Phone Size> to fit the

image to the display.

•

Insert Text: add text to the photo.

•

Slide Show: view all images as a slide

show.

Playing a video clip

1. Scroll to a video folder.

Edit: edit the image and save it as a

different file.

2. Select a video clip. The media player

opens.

ꢀp. 42

•

Delete: delete the file.

Using video options

Rename: change the file name.

Details: access the file properties.

From the video list, press <Options> to

access the following options:

Downloading images

1. Scroll to the Downloads folder.

•

Play: play the video clip.

Add to Play List: add the file to the play

list.

2. Select Get Graphics. You are connected

to the website preset by your service

provider.

•

Send via: send the file via MMS, e-mail,

or Bluetooth.

3. Search for the file you want and follow

the onscreen instructions to download it.

•

Move: move the file to another folder.

Copy: copy the file to another folder.

Delete: delete the selected file or all

files.

Videos

Use this menu to access video clips you have

recorded, downloaded, received in

messages, or imported from your computer.

•

Rename: change the file name.

Lock/Unlock: lock the file to prevent it

from being deleted, or unlock the file.

Details: access the file properties.

New Folder: add a new folder.

Video clips recorded on other devices, such

as camcorders, may not play correctly.

•

Memory Status: access the memory

information for each folder in My Files

Menu functions

During playback, use the following keys:

Downloading video clips

1. Scroll to the Downloads folder.

Key

Left

Function

2. Select Get Video. You are connected to

the website preset by your service

provider.

Returns to the previous file.

Skips to the next file.

Right

3. Search for the file you want and follow

the onscreen instructions to download it.

Up/Down/ Adjusts the volume.

Sounds

Centre

Allows you to send the

selected file to other people.

Use this menu to access voice memos you

have recorded, and sound clips you have

downloaded, received in messages, or

imported from your computer.

Using sound options

From the sound list, press <Options> to

access the following options:

Playing a sound clip

1. Scroll to a sound folder.

•

Play: play the selected file.

Send via: send the file via MMS, e-mail,

or Bluetooth.

2. Select a sound clip. The selected sound

plays.

•

Set as Ringtone: set the file as your

ringtone for voice calls or video calls.

For a voice memo, see Voice Recorder

ꢀ

p. 44

Set as Caller ID: set the sound clip as a

ringtone for a Phonebook entry.

•

Move: move the file to another folder.

Copy: copy the file to another folder.

•

Delete: delete the selected file or all

files.

Using music options

From the music list, press <Options> to

access the following options:

•

Rename: change the file name.

Lock/Unlock: lock the file to prevent it

from being deleted, or unlock the file.

•

Play: play the music file.

Add to Play List: add the file to the play

list.

•

New Folder: add a new folder.

Details: access the file properties.

•

Send via: send the file via MMS, e-mail,

or Bluetooth.

Memory Status: access memory

information for each folder in My Files

Set as Ringtone: set the file as your

ringtone for voice calls or video calls.

Downloading sound clips

1. Scroll to the Downloads folder.

Set as Caller ID: set the music file as a

ringtone for a Phonebook entry.

2. Select Get Ringtones. You are

•

Move: move the file to another folder.

connected to the preset website by your

service provider.

Copy: copy the file to another folder.

Delete: delete the selected file or all

files.

3. Search for the file you want and follow

the onscreen instructions to download it.

•

Rename: change the file name.

Music

Lock/Unlock: lock the file to prevent it

from being deleted, or unlock the file.

This menu displays music files you have

downloaded or received in messages.

•

New Folder: add a new folder.

Details: access the file properties.

Playing a music file

1. Select a music folder.

Memory Status: access the memory

information for each folder in My Files

2. Select a music file. The media player

opens.ꢀp. 42

Menu functions

•

Details: access the application

properties.

Downloading music files

1. Scroll to the Downloads folder.

Move Up/Move Down: move the

selected application within the

application list.

2. Select Get Music. You are connected to

the website preset by your service

provider.

•

New Folder: add a new folder.

3. Search for the file you want and follow

the onscreen instructions to download it.

Delete: delete the selected application

or application folder, except for

embedded applications and default

application folders.

Games

Use this menu to access the embedded Java

games and download Java applications.

•

Rename: change the name of the

application or application folder.

Accessing an applications

Lock/Unlock: lock the application to

Select an application from the application list

and follow the onscreen instructions. The

procedure may differ from application to

application.

prevent it from being deleted, moved,

and renamed, or unlock the application.

•

Memory Status: access memory

information for each folder in My Files

Using Java application options

Downloading new applications

From the application list, press <Options

to access the following options:

1. Select Get Games. You are connected to

the website preset by your service

provider.

•

Launch: launch the selected application.

2. Search for the application you want and

follow the onscreen instructions to

download it.

Network Settings: select a connection

profile to be used for applications

requiring network access. You can also

create or edit a profile.ꢀp. 91

Other Files

Memory Status

Files that you have received but which are

not supported by your phone are stored in

this folder. You cannot open these files on

the phone.

Use this menu to check memory information

for each folder in My Files

Camera (Menu 7)

From the file list, press <Options> to

access the following options:

You can use the camera module embedded

in your phone to take photos and record

videos.

•

Send via: send the file via e-mail or

Bluetooth.

To access this menu, press <Menu> in Idle

mode and select Camera or press [ ].

•

Delete: delete the selected file or all

files.

•

Rename: change the file name.

• Do not take photos of people without their

permission.

• Do not take photos in a place where

cameras are not allowed.

• Do not take photos in a place where you

may interfere with another person’s

privacy.

Lock/Unlock: lock the file to prevent it

from being deleted, or unlock the file.

Details: access the file properties.

New Folder: add a new folder.

•

Memory Card

Taking a photo

Use this menu to access the files stored on

the memory card. This option is only

available when you insert a memory card

into the phone.

You can take photos in various modes. The

camera produces jpeg photos.

When you take a photo in direct sunlight or

in bright conditions, shadows may appear on

the photo.

For details about using files, see the

corresponding menu.

Menu functions

Taking a photo

Using camera options in Capture

mode

1. Access the Camera menu to turn on the

camera. You can also press [ ] in Idle

mode.

In Capture mode, press <Options> or

> to access the following options:

2. Aim the lens at the subject by rotating

the camera lens and make any desired

adjustments.

•

Record Video: switch to Record mode.

•

Shooting Mode: take a photo in the

following modes:

•

Press <Options> or <

> to use

Single Shot: take a photo in Normal

mode. You can select whether or not the

camera automatically saves a photo.

camera options. next section

ꢀ

•

Use the keypad to change the camera

settings or switch to other modes.

ꢀ

Multi Shot: take a series of action stills.

You can select the number of photos the

camera will take.

p. 63

3. Press [Centre] or [

The photo is saved in the Photos folder.

]

to take a photo.

Mosaic Shot: take several stills and

save them in one frame. You can select

the layout. Press [Centre] to take each

photo.

4. To

Press

use photo options <Options> or

>.ꢀp. 64

•

Effects: change the colour tone of the

image.

delete the photo

<Delete> and then

•

Frames: apply a decorative frame.

Yes>.

Flash: determines the use of the flash.

send the photo

via MMS

[Centre].

ꢀp. 67

Timer: set a time delay before the

camera takes a photo.

return to Capture [

•

Go to Photos: access the Photos folder.

mode

•

Camera Settings: change the default

settings for taking a photo:

Zoom Sound: turn the sound effect for

zooming on or off.

Size: select an image size.

Brightness Sound: turn the sound

effect for brightness adjustment on or

off.

Photo Quality: select an image quality.

Viewfinder: select a preview screen.

Save: select the memory location to

store photos, if a memory card is

inserted.

Spot Focus: adjust the exposure based

on a specific area of the image. Select

On to display the spot focus frame in the

middle of the image, and change the

exposure according to the brightness of

the image fragment in the frame.

Multi Shot Speed: select the shooting

speed in Multi Shot mode.

Default Name: change the default

prefix of file names.

White Balance: adjust the colour

temperature of the camera, depending

on the current lighting conditions. You

can make the photo look warmer or

cooler.

•

Camera Shortcuts: view the functions

of the keys you can use in Capture

mode.

Using the keypad in Capture mode

ISO: change the ISO setting, which

controls the sensitivity of your camera.

For low light situations, select a higher

ISO number. The higher the ISO number,

the faster the camera shutter functions

and the more sensitive the camera is to

light. Higher ISO settings may bring

some distortion to an image.

You can use the keypad to customise your

camera settings in Capture mode.

Key

Function

Left/Right Zooms in or out. (Not available

for the maximum size)

Up/Down Adjusts the brightness.

Menu functions

Using photo options

Key

Function

After saving a photo, press <Options> to

access the following options:

Flips the image vertically.

Shows the mirror image.

Switches to Record mode.

•

Take Another: return to Capture mode.

View: access one of the multi-shot

photos.

ꢀ

p. 64

•

Send via: send the file via MMS, e-mail

or Bluetooth.

Changes the image size.

Changes the image quality.

Changes the shooting mode.

Delete: delete the file, or all of the

multi-shot photos.

Set as: set the photo as wallpaper for

the main display, or as a caller ID image

for a Phonebook entry.

Changes the colour tone or

applies a special effect.

Changes the ISO setting.

Adds a decorative frame.

Sets the timer.

•

Rename: change the file name.

Go to Photos: access the Photos folder.

ꢀ

p. 55

•

Lock Unlock: lock the file to prevent it

Goes to the Photos folder.

from being deleted, or unlock the file.

Properties: access the file properties.

Changes the white balance

setting.

Recording a video

Determines the use of the

flash.

You can record a video of what is displayed

on the camera screen and save it.

Changes the preview screen.

Recording a video

Using camera options in Record mode

1. Access the Camera menu to turn on the

camera. You can also press [ ] in Idle

mode.

In Record mode, press <Options> to access

the following options:

•

Take Photo: switch to Capture mode.

2. Press [1] to switch to Record mode.

Effects: change the colour tone of the

image.

3. Make any desired adjustments.

•

Press <Options> to use camera

options. next section

Use the keypad to change the camera

settings or switch to other modes.

•

Flash: determine the use of the flash.

ꢀ

Go to Videos: access the Videos

folder.ꢀp. 57

•

Video Settings: change the following

settings for recording a video:

ꢀ

p. 66

4. Press [Centre] or [ ] to start recording.

Default Name: change the default

prefix of file names.

5. Press [Centre] or [ ] to stop recording.

The video is saved in the Videos folder.

Save: select the memory location to

store video clips, if a memory card is

inserted.

6. To

use video options

Press

<Options>.ꢀp. 66

Quality: select an image quality.

delete the video

clip

Delete> and then

Recording Time: select a video

recording mode.

<Yes>.

Select Limit for MMS to record a video

suitable for an MMS message.

return to Record

mode

[Centre] or [C].

Menu functions

Select Normal to record a video within

the limit of the currently available

memory. The length of your video is

determined by how much memory has

been used.

Key

Function

Changes the video recording

mode.

Changes the colour tone or

applies a special effect.

Size: select a frame size.

Audio Record: turn the audio on or off.

Mutes or unmutes audio.

•

Video Shortcuts: view the functions of

the keys you can use in Record mode.

Goes to the Videos folder.

Determines the use of the

flash.

Using the keypad in Record mode

You can use the keypad to customise your

camera settings in Record mode.

Using video options

After saving a video clip, press <Options

to access the following options:

Key

Function

Left/Right Zooms in or out.

Up/Down Adjusts the brightness.

Flips the image vertically.

•

Play: play back the file.

Viewfinder: return to Record mode.

Send via: send the file via MMS, e-mail

or Bluetooth.

Shows the mirror image.

•

Delete: delete the file.

Switches to Capture mode.

p. 61

Rename: change the file name.

ꢀ

Go to Videos: access the Videos folder.

Changes the frame size.

ꢀ

p. 57

Changes the image quality.

2. Enter a destination number.

Messages (Menu 8)

Use the Messages menu to send and

receive text messages, multimedia

messages, and e-mails. You can also access

push messages, voicemails, broadcast

messages, and configuration messages.

To send the message to more than one

recipient, fill in additional destination

fields.

3. Press [Centre] to send the message.

Using options while composing an SMS

message

To access this menu, press <Menu> in Idle

mode and select Messages

While composing a message, press

Options> to access the following options:

Create New Message (Menu 8.1)

•

Send: send the message.

Use this menu to create and send text

messages, multimedia messages, or

e-mails.

•

Input Method: change the text input

mode.

•

Insert: insert a text template,

Phonebook entry, or bookmarked URL

address.

Text Message (Menu 8.1.1)

Short Message Service (SMS) allows you to

send or receive text messages.

Save to Drafts: save the message in

the Drafts folder.

Creating and sending an SMS message

Multimedia Message (Menu 8.1.2)

1. Enter your message and press [Centre].

Multimedia Message Service (MMS) delivers

messages containing a combination of text,

image, video, and audio, from phone to

phone or from phone to e-mail.

• The maximum number of characters

allowed in a message varies by service

provider. If your message exceeds the

maximum number of characters, the

phone will split the message.

• You can use various options by

pressing <Options>.

ꢀnext section

Menu functions

Creating and sending an MMS message

Using options while composing an MMS

message

1. Enter the message subject.

While composing a message, press

You can use various options by pressing

<Options> to access the following options:

Options> in each field.ꢀnext section

•

Input: enter the message text.

2. Select the Text line.

•

Add File: add an image, video, or sound

clip.

3. Enter the message text and press

[Centre].

•

Send: send the message.

4. Select the Picture or Video or Audio

line and add an image, video, or sound

clip.

Preview: view the message as it will be

shown on the recipient’s phone.

•

Input Method: change the text input

mode.

• The maximum size allowed for a

message can differ, depending on your

service provider.

• Depending on the file type or DRM

(Digital Rights Management) system,

some files may not be able to be

forwarded.

Insert Text Template: insert a text

template.

Save to Drafts: save the message in

the Drafts folder.

Add Page: add pages. Move to each

page by pressing [Left] or [Right].

5. When you have finished, press [Centre].

6. Enter a phone number or e-mail address.

Move Page: move the current page

backward or forward to change the page

order.

To send the message to more than one

recipient, fill in additional destination

fields.

•

Delete Page: delete a page.

7. Press [Centre] to send the message.

•

Edit Style: change the page properties.

3. Enter the message text.

This Page: set the page duration and

change font colour and style for the

selected page.

4. Move to the Attach Files line.

5. Press <Options> and select Add Files

Add Name Card, or Add V-Calendar

All Pages: change the background

colour and page layout.

6. Select images, videos, sounds, name

cards, or calendar data.

•

Edit Text

text, image, video, or sound clip.

Delete Text Delete File: delete the

/Change File: edit the added

7. Press <Options> and select Attach

8. When you have finished, press [Centre].

9. Enter an e-mail address.

added text, image, video, or sound clip.

To send the e-mail to more than one

recipient, fill in additional destination

fields.

Save as Template: save the message

as a template in the MMS Templates

folder.

10.Press [Centre] to send the e-mail.

Email (Menu 8.1.3)

Using options while composing an

e-mail

You can send and receive e-mails that

include text, audio, and images. To use this

feature, you need to subscribe to an e-mail

service and set up your e-mail account.

While composing an e-mail, press

<Options> to access the following options

in each field:

ꢀ

p. 79

•

Send: send the message.

Creating and sending an e-mail

Input Method: change the text input

mode.

1. Enter the e-mail subject.

You can use various options by pressing

•

Insert Text Template: insert a text

template.

<Options> in each field.

ꢀnext section

2. Move to the Message field.

Menu functions

•

Insert: insert a text template,

Phonebook entry, or bookmarked URL

address.

•

MMS notification

Push message from web servers

Configuration message, containing

network parameters from your

service provider

•

Attached File List: access the file list

you attached.

Add Files: add images, videos, or

sounds.

• Depending on the DRM (Digital Rights

Management) system, messages having

web content may not be able to be

forwarded.

Add Name Card: attach a Phonebook

entry as a name card.

• A icon next to a message means that the

Add V-Calendar: attach calendar data

as a data format attachment.

message is of high priority. A grey-

coloured message icon indicates low

priority.

Delete All Attachments: delete all

attachments.

Using message options

Save to Drafts: save the e-mail in the

Drafts folder.

While viewing a message, press <Options

to access the following options:

Inbox (Menu 8.2)

SMS messages

This folder stores all types of messages you

have received, except for e-mails.

•

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

Viewing a message

•

Add to Favorites: save the highlighted

web link to the bookmark list.

The following icons may appear on the list to

show the message type:

Send: send an SMS, MMS, or e-mail to

the highlighted phone number or e-mail

address.

•

SMS message

MMS message

•

Reply: reply to the sender via SMS or

MMS.

•

Play: play the sound file attached to the

message.

Forward: forward the message to other

people.

Reply: reply to the sender via SMS or

MMS.

Call Back: dial the phone number of the

sender.

Reply All: send a reply to the sender

and all recipients.

Save to Phonebook: save the sender’s

phone number to Phonebook. If a phone

number, e-mail address, or URL address

within the message is selected, you can

also save it to Phonebook.

Forward: forward the message to other

people.

Call Back: dial the phone number of the

sender.

Save As Template: save the message

as a template in the MMS Templates

folder.

•

Move to SIM/Move to Phone: move

the message between the phone’s

memory and the USIM/SIM card.

•

Save Files: save media items from the

message into your phone’s memory or a

memory card.

Delete: delete the message.

MMS messages

•

Save to Phonebook: save the sender’s

phone number to Phonebook. If a phone

number, e-mail address, or URL address

within the message is selected, you can

also save it to Phonebook.

Call/Go to URL/Go to RTSP: dial the

highlighted phone number or access the

highlighted web link.

•

Add to Favorites: save the highlighted

web link to the bookmark list.

•

Delete: delete the message.

Send: send an SMS, MMS, or e-mail to

the highlighted phone number or e-mail

address.

Details: access the message properties.

Menu functions

Push messages

•

Forward: forward the message to other

people.

•

Go to URL/Go to RTSP: connect to the

URL specified in the message.

Sort By: change the sort order of the

message list.

•

Delete: delete the message.

Delete: delete the selected message or

all messages.

Configuration messages

•

Install: apply the configuration value in

the message to your phone.

Details: access the message properties.

•

Delete: delete the message.

Outbox (Menu 8.4)

Delivery reports

This folder stores messages that the phone

is attempting to send or has failed to send.

•

Call Back: dial the phone number of the

sender.

The following icons on the message list

indicates the sending status:

•

Save to Phonebook: save the sender’s

phone number to Phonebook. If a phone

number, e-mail address, or URL address

within the message is selected, you can

also save it to Phonebook.

•

Being sent

Failed to be sent

From the message list, press <Options> to

access the following options:

•

Delete: delete the report.

•

View: open the selected MMS message.

Edit: edit the message.

Sent (Menu 8.3)

This folder stores messages that you have

sent.

Send Again: resend the message.

Cancel Sending: cancel sending the

message.

From the message list, press <Options> to

access the following options:

•

Sort By: change the sort order of the

message list.

•

View: open the selected message.

•

Delete: delete the selected message or

all messages.

Viewing received e-mails

1. Press <Options> and select Download

Details: access the MMS message

properties.

The phone checks the e-mail server and

downloads new e-mails.

2. Select an e-mail or a header.

Drafts (Menu 8.5)

3. If the e-mail has more than one page,

This folder stores messages you have saved

to send them at a later time.

press [

by one.

] to scroll through pages one

From the message list, press <Options> to

access the following options:

4. Select an attached file to view or play it.

Depending on the DRM (Digital Rights

Management) system, messages having

web content may not be able to be

forwarded.

•

View: open the selected MMS message.

Edit: edit the selected message.

Send: send the message.

Sort By: change the sort order of the

message list.

Using e-mail options

While viewing the e-mail or header, press

•

Delete: delete the selected message or

all messages.

<Options> to access the following options:

•

View: open the selected e-mail.

•

Retrieve: retrieve the body of the

selected e-mail header from the e-mail

server.

Email Inbox (Menu 8.6)

This folder stores e-mails that you have

received.

•

Reply: send a reply to the sender.

Reply to All: send a reply to the sender

and all recipients.

Menu functions

•

Forward: forward the e-mail to other

people.

Templates (Menu 8.7)

Use this menu to create, edit, and send SMS

templates and MMS templates.

•

Download: download new e-mails or

headers from the e-mail server.

Text Templates (Menu 8.7.1)

Sort By: change the sort order of the

e-mail list.

You can create SMS templates with the

sentences you use frequently so that you

can retrieve and insert them when

composing an SMS message.

•

Save Files: save the selected file.

Save to Phonebook: extract phone

numbers or e-mail addresses from the

e-mail and save them in Phonebook.

Creating a template

•

Block: add the sender’s e-mail address

or e-mail subject to the Block list to

reject e-mails from that address or

containing that subject.

1. Press <Options> and select New

2. Enter a message and press [Centre].

Using template options

From the template list, press <Options> to

access the following options:

•

Delete from Phone: delete the selected

e-mail or all e-mails from the phone’s

memory.

•

Send: create and send a new message

using the template via SMS, MMS, or

e-mail.

Delete Permanently: delete the

selected e-mail or all e-mails from both

the phone’s memory and the e-mail

server.

•

Edit: change the selected template.

New: add a new template.

•

Details: access the e-mail properties.

Delete: delete the selected template or

all templates.

MMS Templates (Menu 8.7.2)

Voice Mail (Menu 8.8)

You can create MMS templates so that you

can use them in composing an MMS

message.

Use this menu to store the number of the

voicemail server and access your voicemails.

•

Connect to Voice Mail: connect to the

voicemail server to listen to your

messages.

Creating a template

1. Press <New>, or press <Options> and

select New, if one has been already

stored.

•

Voice Server Number: enter the

voicemail server number.

2. Create a template as you would when

creating an MMS message.

You must store the voicemail server number

before accessing the server. Your service

provider can give you the number.

3. Press [Centre] save the template.

Using template options

Broadcast (Menu 8.9)

From the template list, press <Options> to

Your phone receives broadcast messages,

which are text messages related to various

topics, such as weather forecast, traffic, and

news report, from networks. Use this menu

to access received broadcast messages.

access the following options:

•

View: open the selected template.

Send: send the selected template via

MMS.

•

New: add a new template.

Viewing a broadcast message

Edit: edit the selected template.

All broadcast messages are stored in the

Temporary folder and will be deleted after

a period of time. If you do not want a

message to be deleted, save it to the

Archive folder. While viewing the message,

Delete: delete the selected template or

all templates.

press <Options> and select Save

Menu functions

Using message options

Text Message (Menu 8.11.1)

While viewing a message, press <Options

You can configure SMS settings.

to access the following options:

•

Settings x: set the properties of each

•

Call

Go to URL

Go to RTSP: dial the

profile:

highlighted phone number or access the

highlighted web link.

Center Address: store or change the

number of your SMS server.

•

Create Email: send an e-mail to the

highlighted e-mail address.

Expiration: set the length of time your

messages are stored in the SMS server.

Save: save the message in the Archive

folder.

Default Type: set the default message

type. The network can convert messages

into the selected format.

Delete: delete the message.

Name: enter a profile name.

Delete All (Menu 8.10)

•

Sending Options: set up the options for

Use this menu to delete messages in each

message type at once.

sending SMS messages:

Keep a Copy: leave copies of your

messages in the Sent folder after

sending.

1. Press [Centre] to select the message

types to be cleared.

2. Press <Delete>.

Email Gateway Address: check the

e-mail gateway address.

3. Press <Yes> to confirm the deletion.

Character Support: select a character

encoding type. When you select

Settings (Menu 8.11)

Automatic, the phone switches the

encoding type from GSM Alphabet to

Unicode if you enter a Unicode character.

Use this menu to set up various options for

using messaging services.

Using Unicode encoding will reduce the

maximum number of characters in a

message to about half. If this menu is

not shown, your phone provides

Request Delivery Report: set the

network to inform you when your

messages have been delivered.

Request Read Report: send a read-

replay request along with your

messages.

automatic character encoding by default.

Multimedia Message (Menu 8.11.2)

Keep a Copy: leave copies of your

messages in the Sent folder after

sending.

You can configure MMS settings.

•

Sending Options: set up the options for

sending MMS messages:

Add Signature: allow your signature to

be attached to your message.

Priority: set the priority level of

messages.

Input Signature: enter your signature.

Expiration: set the length of time

messages are stored in the MMS server.

Message Size: select a maximum file

size of allowed for messages. Available

message size may vary, depending on

your country.

Custom Time(Hour): enter the length

of time you want if you select Custom

Time in the Expiration option.

•

Receiving Options: set up the options

for receiving MMS messages:

Delivery: set a time delay before

messages are sent.

Download Type: determine if your

phone retrieves new messages

automatically when you are in your

home service area.

Custom Time(Hour): enter the length

of time you want if you select Custom

Time in the Delivery option.

Hide Address: set your address to be

hidden from the recipient’s phone.

Roaming Network: determine if your

phone retrieves new messages

automatically when you are roaming in

another network.

Menu functions

Reception within your home network or

while roaming has the following options:

•

MMS Profiles: select a connection

profile to be used for MMS. You can also

create or edit a profile.ꢀp. 91

Auto Download: the phone

automatically retrieves messages from

the server.

Creation Mode: select an MMS creation

mode:

Manual: the phone receives

notifications first from the server. Use

the Retrieve option to manually

retrieve new messages.

Free: you can create a message with

any type of content and of any size.

Restrict: you can create a message with

any type of contents and size.

Restricted: the phone receives

notifications first from the server. When

you attempt to retrieve new messages,

the phone informs you of additional

charges.

Warning: you can create a message

with any type of content and of any size,

but the phone will inform you when the

content and size exceed the maximum.

•

Slide Interval: select the length of time

the display shows each page in a

message.

Send Delivery Report: set the network

to inform the sender when a message

has been delivered to you.

Email (Menu 8.11.3)

Send Read Report: determine whether

or not the phone sends a read-reply

when an incoming message has been

read.

You can configure e-mail settings.

You cannot change e-mail profile settings

while an e-mail is being sent or retrieved.

Reject Anonymous: reject messages

from unknown senders.

•

Sending Options: set up the options for

sending e-mails:

Reject Advertisement: reject

advertisements.

From: set the sender name.

Sending Account: select the default

account.

download e-mails at the specified

intervals.

Priority: select the priority level of

e-mails.

Polling Frequency: set how often the

phone checks the e-mail server for

automatic polling.

Keep a Copy: leave copies of your

e-mails in the Sent folder after sending.

Block Address: specify e-mail

addresses to reject e-mails from those

addresses, and activate or deactivate

mail blocking.

Include Body When Replying: set

whether or not the phone includes the

original e-mail text in a reply.

Block Subject: specify subjects to

reject e-mails which contain those

subjects you specify, and activate or

deactivate mail blocking.

Delivery Report: set the network to

inform you when your e-mails are

delivered.

Add My Name Card: allow your contact

information to be attached to e-mails.

•

Email Profiles: select a network

connection profile to be used for e-mail

services. You can also create or edit a

Add Signature: attach your signature

to e-mails.

profile.ꢀp. 91

Input Signature: enter your signature.

Email Accounts: set up an e-mail

account and select an account to be

used. Press <Options> and select Edit

to access the following options for

setting up an account:

•

Receiving Options: set up the options

for receiving e-mails:

Set Download Limit: determine the

maximum size for incoming e-mails. Your

phone will reject e-mails that exceed the

specified size.

Account Name: enter a name for the

currently selected account.

Auto Polling: set the phone to

automatically check the e-mail server to

SMTP Server: enter the IP address or

host name of the outgoing e-mail server.

Menu functions

SMTP Port: enter the SMTP port

My Address: set your e-mail address.

number.

User Name: enter the POP3 or IMAP4

Use SSL: activate the use of the SSL

user name.

(Secure Sockets Layer) protocol.

Password: enter the POP3 or IMAP4

Retrieving Server Type: select the

protocol for the incoming e-mail server.

The remaining options depend on the

protocol type setting.

password.

Use SMTP Authentication: enable

SMTP authentication, which requires the

user to log in before sending e-mails.

POP3 Server/IMAP4 Server: enter the

IP address or host name of the POP3 or

IMAP4 server.

Same as POP3/IMAP4: select if you

want the SMTP server to have the same

parameters as the POP3 or IMAP4 server.

POP3 Port/IMAP4 Port: enter the

POP3 or IMAP4 port number.

User Name: enter the SMTP user name.

Password: enter the SMTP password.

Use SSL: activate the use of the SSL

(Secure Sockets Layer) protocol.

Voice Mail (Menu 8.11.4)

IMAP4 Retrieving Option: (IMAP4

protocol only): set whether the phone

retrieves only new messages or all

messages.

Use this menu to set the number of your

voicemail server.

You must store the voicemail server number

before accessing the server. Your service

provider can give you the number.

Retrieving Option: set wether the

phone downloads e-mail headers only or

the complete e-mail.

Push Messages (Menu 8.11.5)

You can set whether or not to receive push

messages from the web server.

Keep in Server: leave the copies of

e-mails on the e-mail server after

retrieving.

Broadcast (Menu 8.11.6)

Settings (Menu 9)

You can change the settings for receiving

broadcast messages.

The Settings menu provides you with

various setting options to customise the

phone to your preferences and needs. You

can also reset the settings to their default

status.

•

Receive: select whether or not the

phone receives broadcast messages.

•

Channel: indicate the channels from

which you wish to receive broadcast

messages. Please contact your service

provider for further details.

To access this menu, press <Menu> in Idle

mode and select Settings

Profiles (Menu 9.1)

Memory Status (Menu 8.12)

Your phone provides you with sound profiles

that allow you to quickly and easily change

the sound settings of the phone for different

events or situations. Use this menu to adjust

the properties of each profile and activate

the profile you need.

Use this menu to view the number of

messages or the amount of memory

currently in use for each message type in

each folder.

Editing a profile

1. Scroll to the profile you want.

2. Press <Options> and select Edit

3. Change the sound settings:

•

Call Alert Type: select an alert type

for the call ringer.

Menu functions

•

Voice Call Ringtone: select a

ringtone for voice calls.

Video Call Ringtone: select a

ringtone for video calls.

Tone Volume: adjust the volume for

the call ringer.

Message Alert Type: select an alert

type for the message ringer.

Message AlertTone: select a

ringtone for the message ringer.

Message Alert Repetition: select if

the phone repeatedly reminds you of

a new message.

Call Connect Tone: set the phone to

beep when an outgoing call is

connected to the system.

Call End Tone: set the phone to

beep when a call is disconnected by

the other person or due to a faded

signal.

Power On/Off: set the phone to

beep when you turn it on or off.

Flip Open/Close: set the phone to

sound when you open or close it.

Alerts On Call: set the phone to

beep when you receive a new

message or when the time for an

alarm comes during a call.

•

Phone Sounds: turn the various

sounds on the phone on or off:

All On: enable all tones.

•

KeyTones: select a tone which

sounds when you press a key.

KeyTone Volume: adjust the key

tone volume.

Call Answer Mode: (For Car) select

how to answer an incoming call.

Popup Box Alerts: set the phone to

beep when a pop-up window

displays.

Minute Minder: set the phone to

beep every minute during an

outgoing call to keep you informed of

the length of your call.

4. When you have finished, press

Options> and select Save

Changing an active profile

LCD Brightness (Menu 9.2.4)

From the profile list, select the profile you

want.

Use this menu to adjust the brightness of

the main display.

Sub LCD Contrast (Menu 9.2.5)

Display Settings (Menu 9.2)

You can adjust the contrast for the external

display. Adjust this setting with the display

brightness to see the display clearly in

different lighting conditions.

Use this menu to change settings for the

display.

Greeting Message (Menu 9.2.1)

Use this menu to enter the greeting that is

displayed on the main display or external

display.

Backlight (Menu 9.2.6)

You can select the length of time the

backlight or display stays on.

Wallpaper (Menu 9.2.2)

•

On: select the length of time the

You can change the background image that

is displayed on the main display. You can

select one of the images in the Images

folder.

backlight stays on in times of inactivity.

•

Dim: select the length of time the

display stays on in Dim mode after the

backlight turns off. After a specified time,

the display turns off.

Sub LCD (Menu 9.2.3)

Use this menu to select an image or enter

text to be displayed on the external display.

Dialing Display (Menu 9.2.7)

Use this menu to customise the settings for

the numbers entered and the background.

•

Clock: select a clock type.

Sub Title: enter the text you want.

Menu Style (Menu 9.2.8)

Images: press <Change> and select

an image.

You can select a display style for the main

menu screen.

Menu functions

Time & Date (Menu 9.3)

Phone Settings (Menu 9.4)

Use this menu to change the time and date

displayed on your phone. Before setting the

time and date, specify your time zone in the

Many different features of your phone’s

system can be customised to suit your

preferences.

World Time menu.

ꢀ

p. 50

Short Cut (Menu 9.4.1)

•

Time: enter the current time. To select

You can use the Navigation keys as shortcut

keys to access specific menus directly from

Idle mode. Use this menu to assign a

shortcut to a key.

AM or PM for 12-hour time format, press

[Right].

•

Date: enter the current date.

Time Format: select a time format.

Date Format: select a date format.

Assigning a shortcut menu

1. Select a key to be used as a shortcut

key.

Auto Update: activate the auto time

update feature. Your phone will read the

MCC (Mobile Country Code) from the

network and automatically update the

current time for the country that you are

in when you travel abroad.

2. Select a menu to be assigned to the key.

Using shortcut options

On the Short Cut screen, press <Options

to access the following options:

Time information may not be updated

when you move to one time zone to

another within a country.

•

Assign: assign a shortcut menu.

Change: change a shortcut menu

assignment.

•

Remove: deactivate the shortcut

assignment to the selected key.

Remove All: deactivate all shortcut

assignments.

Open To Answer (Menu 9.4.2)

Forwarding (Menu 9.5.2)

Use this menu to answer incoming calls by

opening the phone.

This network service reroutes incoming calls

to a different phone number that you

specify.

Anykey Answer (Menu 9.4.3)

1. Select the type of calls to be diverted.

2. Select a call diverting option:

Use this menu to answer an incoming call by

pressing any key, except for <Reject>,

•

Always: divert all calls.

Busy: divert calls when you are on

another call.

[

], and Volume keys.

Call (Menu 9.5)

•

No Reply: divert calls when you do

not answer the phone.

Use this menu to set options for call

functions.

Unreachable: divert calls when you

are not in your service area or when

your phone is switched off.

Cancel All: cancel all call diverting

options.

Caller ID (Menu 9.5.1)

This network service allows you to hide your

phone number from the person you are

calling. If you select Default, the phone will

use the default setting provided by the

network.

•

3. Enter the number to which the calls will

be diverted in the Forward To line.

4. If you selected No Reply, move to the

Waiting Time line and select the length

of time the network delays before

diverting a call.

Some networks do not allow the user to

change this setting.

Menu functions

5. Press <Options> and select Activate

3. Enter the call barring password supplied

by your service provider.

To deactivate the call diverting, select

Deactivate

4. Press <Options> and select Activate

To deactivate the call barring, select

Barring (Menu 9.5.3)

Deactivate

This network service allows you to restrict

your video calls.

You can change the call barring password

obtained from your service provider. From

the call type list, press <Options> and

1. Select the type of calls to be barred.

2. Select a call barring option:

select Change Password

•

All Outgoing Calls: prohibit all

outgoing calls.

Outgoing Int’l Calls: prohibit

international calls.

Int’l Calls Exc. Home: only allow

calls to numbers within the current

country when you are abroad, and to

your home country.

All Incoming Calls: prohibit

incoming calls.

Waiting (Menu 9.5.4)

This network service informs you when

someone is trying to reach you while you are

on another call.

1. Select the type of calls to which the call

waiting option will apply.

2. Press <Options> and select Activate

To deactivate the call waiting, select

•

Deactivate

Incoming Calls When Roaming

Auto Redial (Menu 9.5.5)

prohibit incoming calls when you use

your phone outside of your home

service area.

Cancel All: cancel all call barring

settings, allowing calls to be sent and

received normally.

Use this menu to make up to ten attempts to

redial a phone number after an unsuccessful

call.

•

Closed User Group (Menu 9.5.6)

Show My Image (Menu 9.6.1)

Use this menu to set incoming and outgoing

calls to be restricted to a selected user

group (CUG). For details about how to

create a closed user group, contact your

service provider.

You can set whether or not the phone

displays your image on the other’s phone via

the camera. If you select Ask Always, the

phone will ask you to turn on the camera.

Select Still Image (Menu 9.6.2)

•

Use User Group: activate CUG index

numbers.

You can select an image to be displayed on

the other’s phone if you will not show your

image via the camera. Press <Change> and

select an image.

•

Outside Access: enable calls to

numbers other than those in the Closed

user group. This feature depends on the

nature of your CUG subscription.

Retry with (Menu 9.6.3)

•

Default Group: enable the default CUG,

if you have set one with your service

provider. When making a call, you are

given the option of using your default

CUG, instead of selecting one from the

list.

You can set what to do when a video call

does not connect:

•

Ask Always: the phone always asks you

to whether or not to retry.

Voice Call: the phone retries with a

voice call.

Group Index: add, delete, or activate

CUG index numbers.

Camera: the phone turns on the camera

and switches to Record mode so that you

can record a video and send it as an MMS

message.

Video Call (Menu 9.6)

Use this menu to change the default settings

for using the video call feature.

Menu functions

•

Messages: the phone will turn on the

camera and switch to Record mode so

that you can record a video and send it

as an MMS message.

Bluetooth technology allows free wireless

connections between all Bluetooth-compliant

devices within a range of 10 metres. Since

the devices communicate using radio waves,

they do not need to be in line of sight to

each other.

•

None: the phone does not retry.

Forwards (Menu 9.6.4)

• If there are obstacles between the

devices, the operating distance may be

reduced.

Use this menu to reroute incoming video

calls to a different phone number that you

• It is recommended that you do not use the

Bluetooth feature while using multimedia

features, such as voice recorder, camera,

and media player, or vice versa, for the

better performance.

specify.

ꢀp. 85

Restrict Calls (Menu 9.6.5)

Use this menu to restrict video calls.

ꢀp. 85

• Some devices, especially those that are

not tested or approved by SIG, may be

incompatible with your phone.

Connectivity (Menu 9.7)

Use this menu to set options for connection

available on your phone.

Setting up the Bluetooth feature

The Bluetooth menu provides the following

options:

Bluetooth (Menu 9.7.1)

Using Bluetooth wireless, you can connect

the phone wirelessly to other Bluetooth

devices and exchange data with them, talk

hands-free, or control the phone remotely.

•

Activation: activate or deactivate the

Bluetooth feature.

My Devices: search for connectable

Bluetooth devices.

•

My Phone’s Visibility: allow other

Bluetooth devices to locate to your

phone, or not.

The colour of the icon indicates the

status of the device:

•

Grey for unpaired devices

Blue for paired devices

Red for devices that are currently

connected to your phone

My Phone’s Name: assign a Bluetooth

device name to your phone, which is

then displayed on other devices.

Secure Mode: determine if the phone

asks for your confirmation when other

devices access your data.

3. Select a device.

4. Enter a Bluetooth PIN and press <OK>.

This code is used just once and you do

not need to memorise it.

Bluetooth Service: display available

Bluetooth services.

When the owner of the other device

enters the same code, pairing is

complete.

Searching for and pairing with a

Bluetooth device

1. From the Bluetooth menu, select My

Some devices, especially headsets or hands-

free car kits, may have a fixed Bluetooth

PIN, such as 0000. If the other device has

one, you must enter the code.

Devices

2. Select Search For New Device

After searching, a list of devices to which

you can connect displays. The following

icons indicate the type of device:

Using device options

From the device list, press <Options> to

access the following options:

•

Hands-free car kit or headset

Mobile phone

Computer

PDA

Unknown device

•

Connect: connect to a headset or

hands-free car kit.

•

Disconnect: end the connection with

the connected device.

Menu functions

•

Browse Device: search for data from

the device and import data directly to

your phone.

6. Select a device.

7. If necessary, enter the Bluetooth PIN

needed for pairing and press <OK>.

•

Rename: rename the selected device.

Receiving data via Bluetooth

Authorize Device/Unauthorize

To receive data via Bluetooth, your phone’s

Bluetooth feature must be active and its

visibility must be enabled.

Device: determine whether or not the

phone asks you to permit connection

when other devices try to connect to

your phone.

1. If an unauthorised Bluetooth device

sends data to your phone, press <Yes

to allow the device to access your phone.

•

Delete: remove the selected device or

all devices from the list.

2. Press <Yes> to receive data.

Sending data via Bluetooth

Network (Menu 9.7.2)

1. Activate the Bluetooth feature.

Use this menu to change the settings for

connecting to your cellular network.

2. Select the application in which the item

you want to send is stored.

•

Network Selection: select to either

manually select the network to be used

while roaming outside of your home

area, or to let the network be chosen

automatically. You can select a network

other than your home network only if

there is a valid roaming agreement

between the two.

3. Scroll to the item you want and press

Options>.

4. Select Send Business Card via

via Send Schedule via Send Task via

Bluetooth

5. Select Search For New Device

/Send

→

The phone searches for devices within

range and displays a list of available

devices.

•

Network Mode: select the network you

use.

Automatic: the phone scans for

Creating a profile

available networks.

1. Press <Options> and select New

GSM 900/1800: the phone operates in

the combined GSM 900/1800 network.

2. Specify profile parameters:

•

Set Name: enter a profile name.

Access Name: edit the access point

name used for the address of the

GPRS network gateway.

GSM 850/1900: the phone operates in

the combined GSM 850/1900 network.

UMTS: the phone operates in UMTS (3G

network) networks. You can get a higher

speed quality than on lower generation

networks, and use advanced data and

information services, such as video calls.

•

Auth Type: choose the type of

authentication used.

•

User ID: enter the user ID.

Password: enter the user password.

Protocol: select the protocol from

Connections (Menu 9.7.3)

among WAP

HTTP, and Other

Use this menu to create and customise the

profiles containing the settings for

connecting your phone to the network. You

need these settings to use the web browser

or send MMS messages or e-mails.

•

Home URL: enter the URL address

of the page to be used as your

homepage.

Gateway Address: (WAP only)

enter the gateway address of the

proxy server.

Proxy Address/Port: (HTTP only)

set the proxy server address and

port.

Your phone is set up by default for

connecting to the network. If you change the

settings without first checking with your

service provider, the web browser, MMS, and

e-mail features may not work properly.

Secure Connection: (WAP only)

turn the secure mode on or off.

Menu functions

•

Linger Time (Sec.): set a time

Traffic Class: select the traffic class.

3. Press <Save> to save the profile.

Using profile options

period after which the network is

disconnected if there has been no

new data traffic in that time.

Advanced Settings: provide you

with the following options:

From the profile list, press <Options> to

access the following options:

•

View: view the properties of the

selected profile.

Static IP: specify if you want to

manually enter an IP address; see

the Local Phone IP option. If you

want the IP address to be

automatically assigned by the server,

remove the check mark.

•

Edit: edit the selected profile.

New: add a new profile.

Delete: delete the profile.

Rename: change the profile name.

Local Phone IP: enter the IP

address obtained from the network

operator, if you checked the Static

IP option.

Restore: restore the changed settings

to the default status.

You cannot edit or delete the default

connection profiles.

Static DNS: specify if you want to

manually enter the Domain Name

Server (DNS) address; see the

Application Settings (Menu 9.8)

Server 1/Server 2 option.

You can customise the settings for using

applications available on the phone.

If you want the address to be

automatically assigned by the server,

remove the check mark.

Browser (Menu 9.8.1)

Use this menu to select a connection profile

to be used for accessing the Internet. You

Server 1/Server 2: enter the

Domain Name Server (DNS)

addresses.

can also create or edit a profile.ꢀp. 91

Messages (Menu 9.8.2)

VOD (Menu 9.8.8)

Use this menu to change the default settings

Use this menu to activate a connection

profile to be used for accessing streaming

servers to use VOD (Video on Demand)

services. You can also create or edit a

for using the messaging services.

ꢀp. 76

Phonebook (Menu 9.8.3)

Use this menu to change the settings for

using Phonebook. p. 41

profile.ꢀp. 91

ꢀ

Security (Menu 9.9)

Camera (Menu 9.8.4)

Use this menu to protect the phone against

unauthorised use by managing the several

access codes of your phone and USIM/SIM

card.

Use this menu to change the default settings

for taking photos.ꢀp. 63

Video Recorder (Menu 9.8.5)

If you enter an incorrect PIN/PIN2 three

times, the USIM/SIM card is blocked. To

unblock it, you need to enter your PUK/PUK2

(Personal Unblocking Key). The codes are

supplied by your network operator.

Use this menu to change the default settings

for recording videos.ꢀp. 65

Record Audio (Menu 9.8.6)

Use this menu to change the default settings

for the voice recorder.ꢀp. 45

Phone Lock (Menu 9.9.1)

Use this menu to protect the phone from

unauthorised use. When this feature is

enabled, you must enter a 4- to 8-digit

phone password each time the phone is

switched on.

Media Player (Menu 9.8.7)

Use this menu to change the default settings

for playing media files in the media player.

ꢀ

p. 43

To change the password, use the Change

Phone Password menu.

Menu functions

SIM Lock (Menu 9.9.2)

Privacy Lock (Menu 9.9.6)

This menu allows your phone to work only

with the current USIM/SIM by assigning a

USIM/SIM lock code. You must enter the

USIM/SIM lock code to use a different USIM/

SIM card.

Use this menu to lock access to messages,

media files, Phonebook entries, or call logs.

When a privacy option is enabled, you must

enter the phone password to access the

locked items.

PIN Lock (Menu 9.9.3)

Change PIN Code (Menu 9.9.7)

The 4- to 8-digit PIN (Personal Identification

Number) protects your USIM/SIM card

against unauthorised use. When this feature

is enabled, the phone requires your PIN each

time it is switched on.

Use this menu to change your PIN. The PIN

Lock feature must be enabled to change the

PIN.

Change PIN2 Code (Menu 9.9.8)

If supported by your USIM/SIM card, use

this menu to change your current PIN2.

Fixed Dialing Mode (Menu 9.9.4)

If supported by your USIM/SIM card, Fixed

Dialling Number (FDN) mode restricts your

outgoing calls to a limited set of phone

numbers. When this feature is enabled, you

can make calls only to phone numbers

stored on the USIM/SIM card.

Memory Status (Menu 9.10)

Use this menu to check the amount of

memory being used for storing data, such as

messages, media, calendar data, or contacts

entries.

Change Phone Password (Menu 9.9.5)

Use this menu to change your phone

password.

Reset Settings (Menu 9.11)

Solve problems

Help and personal needs

Use this menu to reset the phone’s settings

you have changed and clear all data you

have added.

To save the time and expense of an

unnecessary service call, perform the simple

checks in this section before contacting a

service professional.

1. Enter the phone password and press

<Confirm>.

You can change this password.

ꢀp. 94

When you switch on your phone, the

following messages may appear:

2. Press <Yes>. The phone automatically

turns itself off and then back on.

“Please insert SIM card”

•

Be sure that the USIM/SIM card is

correctly installed.

Phone Information (Menu 9.12)

Use this menu to check phone information,

such as your phone number, software

version, and model name.

“Phone lock”

The automatic locking function has been

•

enabled. You must enter the phone’s

password before you can use the phone.

“PIN lock”

•

You are using your phone for the first

time. You must enter the PIN supplied

with the USIM/SIM card.

•

The PIN Lock feature is enabled. Every

time the phone is switched on, the PIN

has to be entered. To disable this

feature, use the PIN Lock menu.

“PUK lock”

The PIN code was entered incorrectly

Your correspondent cannot reach you

•

Be sure that your phone is switched on.

([ ] pressed for more than one

second.)

three times, and the USIM/SIM card is

now blocked. Enter the PUK supplied by

your service provider.

•

Be sure that you have accessed the right

cellular network.

“No service” or “Network error”

displays

Be sure that you have not set an

incoming call barring option.

•

The network connection has been lost.

You may be in a weak signal area. Move

and try again.

Your correspondent cannot hear you

speaking

•

You are trying to access an option for

which you have no subscription with your

service provider. Contact the service

provider for further details.

•

Be sure that you have switched on the

microphone.

•

Be sure that you are holding the phone

close enough to your mouth. The

microphone is located at the bottom of

the phone.

You have entered a number but it

was not dialled

•

Be sure that you have pressed [ ].

The phone starts beeping and “Low

Battery” flashes on the display

Be sure that you have accessed the right

cellular network.

•

Your battery is insufficiently charged.

Recharge the battery.

•

Be sure that you have not set an

outgoing call barring option.

The audio quality of the call is poor

Check the signal strength indicator on

the display ( ). The number of bars

indicates the signal strength from strong

) to weak ( ).

•

(

•

Try moving the phone slightly or moving

closer to a window if you are in a

building.

Health and safety

information

No number is dialled when you re-call

a Phonebook entry

SAR certification information

This phone meets European Union (EU)

requirements concerning exposure to radio

waves.

•

Use the Contact List feature to ensure

the number has been stored correctly.

•

Re-store the number, if necessary.

Your mobile phone is a radio transmitter and

receiver. It is designed and manufactured to

not exceed the limits for exposure to radio-

frequency (RF) energy, as recommended by

the EU Council. These limits are part of

comprehensive guidelines and establish

permitted levels of RF energy for the general

population. The guidelines were developed

by independent scientific organisations

through the periodic and thorough

The battery does not charge properly

or the phone sometimes turns itself

off

•

Wipe the charging contacts both on the

phone and on the battery with a clean

soft cloth.

If the above guidelines do not help

you to solve the problem, take note

of:

evaluation of scientific studies. The limits

include a substantial safety margin designed

to ensure the safety of all persons,

•

The model and serial numbers of your

phone

regardless of age and health.

•

Your warranty details

A clear description of the problem

Then contact your local dealer or Samsung

after-sales service.

Health and safety information

The exposure standard for mobile phones

employs a unit of measurement known as

Specific Absorption Rate (SAR). The SAR

limit recommended by the EU Council is

Before a new model phone is available for

sale to the public, compliance with the

European R&TTE Directive must be shown.

This directive includes as one of its essential

requirements the protection of the health

and safety of the user and any other person.

2.0 W/kg.

The highest SAR value for this model phone

was 0.822 W/kg.

Precautions when using batteries

SAR tests are conducted using standard

operating positions with the phone

•

Never use a charger or battery that is

damaged in any way.

transmitting at its highest certified power

level in all tested frequency bands. Although

the SAR is determined at the highest

certified power level, the actual SAR level of

the phone while operating can be well below

the maximum value. This is because the

phone is designed to operate at multiple

power levels so as to use only the power

required to reach the network. In general,

the closer you are to a base station, the

lower the power output of the phone.

Use the battery only for its intended

purpose.

If you use the phone near the network’s

base station, it uses less power. Talk and

standby time are greatly affected by the

signal strength on the cellular network

and the parameters set by the network

operator.

•

Battery charging time depends on the

remaining battery charge, the type of

battery, and the charger used. The

battery can be charged and discharged

hundreds of times, but it will gradually

wear out. When the operation time is

noticeably shorter than normal, it is time

to buy a new battery.

1. The SAR limit for mobile phones used by the public is

2.0 watts/kilogram (W/kg) averaged over ten grams of

body tissue. The limit incorporates a substantial margin

of safety to give additional protection for the public and

to account for any variations in measurements. The SAR

values may vary, depending on national reporting

requirements and the network band.

•

If left unused, a fully charged battery will

discharge itself over time.

•

Do not short-circuit the battery.

Accidental short-circuiting can occur

when a metallic object like a coin, clip or

pen causes a direct connection between

the + and – terminals of the battery

(metal strips on the battery). For

example, do not carry a spare battery in

a pocket or bag where the battery may

contact metal objects. Short-circuiting

the terminals may damage the battery or

the object causing the short-circuiting.

Use only Samsung-approved batteries,

and recharge your battery only with

Samsung-approved chargers. Disconnect

the charger from the power source when

it is not in use. Do not leave the battery

connected to a charger for more than a

week, since overcharging may shorten

its life.

•

Extreme temperatures will affect the

charging capacity of your battery: it may

require cooling or warming first.

•

Dispose of used batteries in accordance

with local regulations. Always recycle. Do

not dispose of batteries in a fire.

Do not leave the battery in hot or cold

places because the capacity and lifetime

of the battery will be reduced. Try to

keep the battery at room temperature. A

phone with a hot or cold battery may not

work temporarily, even when the battery

is fully charged. Li-ion batteries are

particularly affected by temperatures

below 0°C (32°F).

Road safety

Your wireless phone gives you the powerful

ability to communicate by voice, almost

anywhere, anytime. But an important

responsibility accompanies the benefits of

wireless phones, one that every user must

uphold.

When you are driving a car, driving is your

first responsibility. When using your wireless

phone while driving, follow local regulations

in the country or region you are in.

Health and safety information

Operating environment

Electronic devices

Remember to follow any special regulations

in force in the area you are in, and always

switch off your phone whenever it is

forbidden to use it, or when it may cause

interference or danger.

Most modern electronic equipment is

shielded from radio frequency (RF) signals.

However, certain electronic equipment may

not be shielded against the RF signals from

your wireless phone. Consult the

manufacturer to discuss alternatives.

When connecting the phone or any

accessory to another device, read its user’s

guide for detailed safety instructions. Do not

connect incompatible products.

Pacemakers

Pacemaker manufacturers recommend that

a minimum distance of 15 cm (6 inches) be

maintained between a wireless phone and a

pacemaker to avoid potential interference

with the pacemaker. These

recommendations are consistent with the

independent research and recommendations

of Wireless Technology Research. If you

have any reason to suspect that interference

is taking place, switch off your phone

immediately.

As with other mobile radio transmitting

equipment, users are advised that for the

satisfactory operation of the equipment and

for the safety of personnel, it is

recommended that the equipment should

only be used in the normal operating

position (held to your ear with the antenna

pointing over your shoulder).

Hearing aids

Some digital wireless phones may interfere

with some hearing aids. In the event of such

interference, you may wish to consult your

hearing aid manufacturer to discuss

alternatives.

100

Other medical devices

Potentially explosive environments

If you use any other personal medical

devices, consult the manufacturer of your

device to determine if it is adequately

shielded from external RF energy.

Switch off your phone when in any area with

a potentially explosive atmosphere, and

obey all signs and instructions. Sparks in

such areas could cause an explosion or fire

resulting in bodily injury or even death.

Your physician may be able to assist you in

obtaining this information.

Users are advised to switch off the phone

while at a refuelling point (service station).

Users are reminded of the need to observe

restrictions on the use of radio equipment in

fuel depots (fuel storage and distribution

areas), chemical plants, or where blasting

operations are in progress.

Switch off your phone in health care facilities

when regulations posted in these areas

instruct you to do so.

Vehicles

RF signals may affect improperly installed or

inadequately shielded electronic systems in

motor vehicles. Check with the

manufacturer or its representative regarding

your vehicle.

Areas with a potentially explosive

atmosphere are often but not always clearly

marked. They include the areas below decks

on boats, chemical transfer or storage

facilities, vehicles using liquefied petroleum

gas, such as propane or butane, areas

where the air contains chemicals or

particles, such as grain, dust or metal

powders, and any other area where you

would normally be advised to turn off your

vehicle engine.

You should also consult the manufacturer of

any equipment that has been added to your

vehicle.

Posted facilities

Switch off your phone in any facility where

posted notices require you to do so.

101

Health and safety information

Emergency calls

Other important safety information

•

Only qualified personnel should service

the phone or install the phone in a

vehicle. Faulty installation or service may

be dangerous and may invalidate any

warranty applicable to the device.

This phone, like any wireless phone,

operates using radio signals, wireless, and

landline networks as well as user-

programmed functions, which cannot

guarantee connection in all conditions.

Therefore, you should never rely solely on

any wireless phone for essential

•

Check regularly that all wireless phone

equipment in your vehicle is mounted

and operating properly.

communications like medical emergencies.

To make or receive calls, the phone must be

switched on and in a service area with

adequate signal strength. Emergency calls

may not be possible on all wireless phone

networks or when certain network services

and/or phone features are in use. Check

with local service providers.

Do not store or carry flammable liquids,

gases, or explosive materials in the same

compartment as the phone, its parts, or

accessories.

•

For vehicles equipped with an air bag,

remember that an air bag inflates with

great force. Do not place objects,

including installed or portable wireless

equipment, in the area over the air bag

or in the air bag deployment area.

Improperly installed wireless equipment

could result in serious injury if the air

bag inflates.

To make an emergency call:

1. Switch on the phone.

2. Key in the emergency number for your

present location. Emergency numbers

vary by location.

3. Press [ ].

•

Switch off your phone before boarding an

aircraft. It is dangerous and illegal to use

wireless phones in an aircraft because

they can interfere with the operation of

the aircraft.

Certain features like Call Barring may need

to be deactivated before you can make an

emergency call. Consult this document and

your local cellular service provider.

102

•

Failure to observe these instructions may

lead to the suspension or denial of

telephone services to the offender, or

legal action, or both.

•

Do not store the phone in hot areas.

High temperatures can shorten the life of

electronic devices, damage batteries,

and warp or melt certain plastics.

Do not store the phone in cold areas.

When the phone warms up to its normal

operating temperature, moisture can

form inside the phone, which may

damage the phone’s electronic circuit

boards.

Care and maintenance

Your phone is a product of superior design

and craftsmanship and should be treated

with care. The suggestions below will help

you fulfill any warranty obligations and allow

you to enjoy this product for many years.

•

Do not drop, knock, or shake the phone.

Rough handling can break internal circuit

boards.

•

Keep your phone and all its parts and

accessories out of the reach of small

children and pets. They may accidentally

damage these things or choke on small

parts.

Do not use harsh chemicals, cleaning

solvents, or strong detergents to clean

the phone. Wipe it with a soft cloth

slightly dampened in a mild soap-and-

water solution.

•

Keep the phone dry. Precipitation,

humidity, and liquids contain minerals

that corrode electronic circuits.

•

Do not paint the phone. Paint can clog

the device’s moving parts and prevent

proper operation.

Do not use the phone with a wet hand.

Doing so may cause an electric shock to

you or damage to the phone.

Do not put the phone in or on heating

devices, such as a microwave oven,

stove, or radiator. The phone may

explode when overheated.

Do not use or store the phone in dusty,

dirty areas, as its moving parts may be

damaged.

103

Health and safety information

•

When the phone or battery gets wet, the

label indicating water damage inside the

phone changes colour. In this case,

phone repairs are no longer guaranteed

by the manufacturer's warranty, even if

the warranty for your phone has not

expired.

•

If your phone has a flash or light, do not

use it too close to the eyes of people or

animals. This may cause damage to their

eyes.

Use only the supplied or an approved

replacement antenna. Unauthorised

antennas or modified accessories may

damage the phone and violate

regulations governing radio devices.

•

If the phone, battery, charger, or any

accessory is not working properly, take it

to your nearest qualified service facility.

The personnel there will assist you, and

if necessary, arrange for service.

104

Index

ABC mode, text input • 27

Alarm • 43

Answering

Call time • 35

Caller groups • 38

Caller ID • 85

Calls

photos • 57, 64

SMS • 71, 72, 73, 76

video clips • 57, 66

Dialled calls • 34

Display

backlight, set • 83

answering • 29, 32

call • 29, 32

barring • 86, 88

diverting • 85, 88

holding • 30

second call • 30

Anykey answer • 85

Auto redial • 86

brightness • 83

contrast • 83

layout • 10

making • 28

redialling • 29

rejecting • 29

waiting • 86

settings • 83

Background image • 83

Backlight time, set • 83

Barring, calls • 86, 88

Battery

Diverting, calls • 85, 88

DRM (Digital Rights Management)

• 55

Camera

photos • 61

videos • 64

Characters, enter • 26

Configuration messages • 72

Connection tone • 82

Creating messages

e-mail • 69

MMS • 67

SMS • 67

CUG (Closed User Groups) • 87

DTMF tones, send • 32

charging • 7

low indicator • 8

precautions • 98

Bluetooth

E-mails

creating/sending • 70

deleting • 74

settings • 78

viewing • 73

Emergency calls • 102

receiving, data • 90

sending, data • 90

settings • 88

Broadcast messages • 75

Browser, web • 51

FDN (Fixed Dialling Number) mode

• 94

File manager • 55

Flip tone • 82

Calendar • 45

Call log

Date, set • 84

Deleting

dialled • 34

missed • 34

received • 35

call log • 35

e-mail • 72, 73, 74, 76

MMS • 71, 72, 73, 76

105

Index

phone • 93

USIM/SIM card • 94

Low battery indicator • 8

Music, downloaded • 59

My Files • 55

Games • 81

Greeting message • 83

Names

entering • 26

searching • 36

Network selection • 90

Numbers

Media player • 93

Memory card

accessing files • 61

installing • 24

Memory status

contacts • 41

Health and safety • 97

Holding, call • 30

Icons, description • 10

Images, downloaded • 55

Inbox, messages

e-mail • 73

searching • 36

storing • 37

downloaded items • 61

messages • 81

phone • 94

Organiser • 41

SMS/MMS • 70

International calls • 28

Internet • 51

Outbox, messages • 72

scheduled things • 49

Menu style • 83

Messages

Password

broadcast • 75

configuration • 73

e-mail • 73

greeting • 83

MMS • 67, 71

push • 72

SMS • 67, 70

barring • 86

phone • 94

Java applications • 81

Phone

Key tones

care and maintenance • 103

display • 10

icons • 10

selecting • 82

sending/muting • 31

volume • 82

locking • 93

password • 94

resetting • 95

switching on/off • 8

unpacking • 6

Phonebook

Minute minder • 82

Missed alarm events • 45

Missed calls • 34

MMS messages

creating/sending • 67

deleting • 71

settings • 77

viewing • 71

Multiparty-call • 31

Last number, redial • 29

LCD brightness • 83

Locking

call log • 94

adding • 37

editing • 36

finding • 36

contacts • 94

media contents • 94

messages • 94

106

options • 36

speed-dialling • 39

inserting • 7

locking • 94

Safety

Photos

information • 97

editing • 56

taking • 61

viewing • 55

precaution • 1

Security calls • 94

Sent messages • 72

Shortcuts • 84

Silent mode • 14

SIM card

inserting • 7

locking • 94

SMS messages

Video calls

answering • 32

making • 32

options • 32

setting • 87

PIN, change • 94

PIN2, change • 94

Privacy • 94

Problems, solve • 95

Profiles • 81

Videos

playing • 57

recording • 64

Push messages • 72, 80

Voice recorder

creating/sending • 67

deleting • 71, 76

settings • 76

playing • 44

recording • 44

Received calls • 35

Received messages

e-mail • 73

Voicemail server • 80

viewing • 70

Sound profiles • 81

Speakerphone • 31

Speed-dial • 39

Switching applications • 24

Switching on/off

microphone • 31

phone • 8

MMS/SMS • 70

Recording

videos • 64

voice memos • 44

Redialling

automatically • 86

manually • 29

Resetting phone • 95

Ringer

incoming calls • 82

messages • 82

Road safety • 99

Roaming • 90

Waiting call • 86

Wallpaper • 83

Web browser

access • 51

bookmarks • 52

T9 mode, text input • 26

Templates, message • 74

Text, enter • 26

Time, set • 84

USIM card

107

Transcend Information TS512MSDOM22V User Manual
Toastmaster ME10DTB User Manual
Silicon Laboratories F321DC User Manual
Siemens Gigaset SL55 User Manual
Seagate Solid State Drive ST120HM001 User Manual
Seagate CHEETAH 15K7 SAS ST3300457SS User Manual
Samsung SGH T500 User Manual
Roberts Radio 205 User Manual
Panasonic CD Player DEH X65BT User Manual
Norcent Technologies SDMC 1GB UPC 803802972014 User Manual