Samsung DFX 5000 User Manual

P O R T A B L E  
M O B I L E  
T R I - B A N D  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its  
affiliates in the United States and/or other countries.  
®
Openwave is a registered Trademark of Openwave, Inc.  
®
RSA is a registered Trademark RSA Security, Inc.  
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered  
trademarks and are wholly owned by the Bluetooth SIG.  
Open Source Software  
Some software components of this product incorporate source code covered under GNU General Public License (GPL), GNU Lesser General  
Public License (LGPL), OpenSSL License, BSD License and other open source licenses. To obtain the source code covered under the open  
source licenses, please visit:  
.
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE  
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER  
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE  
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE  
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE  
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF  
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL  
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
Table of Contents  
1
FCC Hearing Aid Compatibility (HAC) Regulations  
2
Section 1: Getting Started  
This section explains how to start using your phone by activating  
your service, setting up your Voicemail, or getting an  
understanding of how this manual is put together.  
Notes and Tips  
Throughout this guide there is text that is set apart from the rest.  
These are intended to point out important information, quick  
methods for activating features, to define terms, and more. The  
definitions for these methods are as follows:  
Understanding this User Manual  
The chapters of this guide generally follow the same order as the  
menus and sub-menus in your phone. A robust index for quick  
reference to most features begins on page 106.  
Notes: Explain alternative options within the current feature, menu, or  
sub-menu.  
Tips: Provide quick or innovative methods for performing functions  
related to the subject at hand.  
Also included is important safety information that you should  
know before using your phone. Most of this information is near  
the back of the guide, beginning on page 75.  
Important: Points out important information about the current feature  
that could affect performance, or even damage your phone.  
Getting Started  
4
           
Text Conventions  
Battery  
This manual provides condensed information about how to use  
your phone. To make this possible, the following terms and icon  
appear in place of repeatedly-used procedural steps:  
Your phone is powered by a rechargeable, standard Li-Ion  
battery. A USB cable and Charging Head are included with the  
phone, for charging the battery.  
highlight Use the Navigation Key  
(
) to move a highlighting  
Note: The battery comes partially charged. You must fully charge the battery  
before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
effect onto a menu item or screen item of interest.  
select  
After “highlighting” a menu item or screen item,  
After the first charge, you can use the phone while charging.  
press the Center Select Key  
(
) to launch, access,  
or save a highlighted menu item or screen field of  
interest.  
Warning!: Use only Samsung-approved charging devices and batteries.  
Samsung accessories are designed to maximize battery life. Using  
other accessories may invalidate your warranty and may cause  
damage.  
Used in place of “select” in long “drill down”  
procedure steps.  
Example: “...Settings  
Call Settings  
Call Answer...”  
5
   
Installing the battery cover  
Battery Cover  
Align the cover and slide it into place, making sure it snaps  
securely at all four corners.  
The battery is under a removable cover on the back of the phone.  
Removing the battery cover  
Press down on the top of the cover and on the arrow at the  
bottom of the cover, while sliding the cover off in the  
direction of the arrow.  
Getting Started  
6
 
Installing the Battery  
Removing the Battery  
1. Remove the battery cover. For more information, see  
1. Remove the battery cover. For more information, see  
2. Insert the top end of the battery into the phone housing,  
aligning the gold contacts on the battery with the gold  
contacts in the phone. Push down on the bottom of the  
battery down until it snaps into place.  
2. Lift the battery up by the slot provided.  
3. Lift the battery up and out of the phone.  
3. Install the battery cover.  
7
   
Charging the Battery  
2. Insert the USB cable into the port at the base of the device.  
Your phone comes with a USB cable and charging head to rapidly  
charge your phone from any 120/220 VAC outlet.  
Note: The battery comes partially charged. You must fully charge the battery  
before using your phone for the first time. A fully discharged battery  
requires up to 4 hours of charge time.  
After the first charge, you can use the phone while charging.  
1. Connect the USB cable to the charging head.  
Charging Head  
Incorrect  
3. Plug the charging head into a standard AC power outlet.  
USB Cable  
4. When charging is complete, the indicator on the charging  
head turns green. Unplug the charging head from the  
power outlet and remove the USB cable from the phone.  
A
L I N K C A B L E  
T
A
D
Important!:  
Incorrect  
Getting Started  
8
 
Battery indicator  
Activating Your Phone  
The battery indicator  
display indicates power level. Monitor the battery strength and  
ensure your battery is adequately charged.  
(
) in the upper-right corner of the  
Contact your Wireless Provider and follow their instructions for  
obtaining service, if necessary. We suggest that you read this  
guide to fully understand the services your phone supports.  
Five bars  
(
)
indicate a full charge.  
Warning!: Your touch screen responds best to a light touch from the pad of  
your finger or a non-metallic stylus. Using excessive force or a  
metallic object when pressing on the touch screen may damage  
An empty battery icon (  
) indicates a near empty battery.  
A blinking empty battery icon (  
you have two to three minutes before the battery is too low to operate  
the phone.  
) and a tone sounding indicate  
Turning Your Phone On  
If you continue to operate the phone without charging, the phone  
will power off.  
Press and hold End  
(
) until the display lights.  
Note: As with any other radio-transmitting device, do not touch the antenna  
while using your phone as this can affect call quality and can cause the  
phone to operate at a higher power level than is necessary.  
Turn Your Phone Off  
Press and hold End  
(
) for two or more seconds. Your  
phone powers off.  
9
     
Voicemail  
Memory Card  
Setting Up Your Voicemail  
Your phone supports optional, removable microSD™ memory  
cards of up to 16GB capacity (not included). You can store music,  
pictures, and other files on a memory card.  
Voicemail allows callers to leave voice messages, which can be  
retrieved any time.  
Installing a Memory Card  
1. Pull the memory card cover out and turn it to expose the  
card slot.  
Note: Once your Voicemail account has been set up, you can use the  
Voicemail folder (under the Messages menu) to view details of voice  
messages in your Voicemail box.  
1. In standby mode, press and hold  
or dial your own  
mobile number to dial Voicemail.  
2. Follow the prompts in the new user tutorial to setup your  
mail box.  
Listen to Voicemail  
1. In standby mode, press and hold  
or dial your own  
mobile number to dial Voicemail. After connecting, you will  
hear your voice greeting.  
2. You are prompted to enter your password.  
Incorrect  
2. Push the memory card into the slot until it locks into place.  
Getting Started  
10  
         
Removing a Memory Card  
1. Pull the memory card cover out and turn it to expose the  
memory card in the card slot.  
2. Press on the memory card to release the lock, then remove  
the card.  
Formatting  
Formatting erases all content from the memory card and  
prepares it for use with your phone.  
Formatting a Memory Card using Your Phone  
1. In standby mode, press Menu (  
Memory Info Card Memory  
2. At the prompt, press Yes  
)
Settings  
Format Card  
, then press the OK  
.
(
)
(
) .  
Formatting a Memory Card using Your PC  
3. For best playback of songs stored on a microSD™  
memory card, use the PC file system FAT32. Consult your  
PC and/or memory card reader documentation for  
information about formatting memory cards.  
11  
   
Section 2: Understanding Your Phone  
This section outlines some key features of your Samsung  
Freeform II phone. It also describes the screen format.  
Your Phone’s Features  
Domestic and international voice and text messaging service (available  
on participating networks).  
Large 2.2 inch (diagonally) color screen (220 x 176 pixel resolution)  
High speed data (CDMA 2000 1x Technology)  
®
Bluetooth Wireless Technology (see Note)  
Global Positioning System (GPS) Technology  
Digital Assistant Tools  
QWERTY Keypad  
Text (SMS), Picture (MMS), Email, and Instant (IM) Messaging  
Built-in 1.3 Megapixel Digital Camera  
Voice Dial  
Music Player (requires an optional Memory Card)  
Memory Card Slot (microSD™ and microSDHC™ up to 16 Gb)  
Note: The Freeform II phone supports the wireless headset, hands-free,  
A2DP, phonebook access, file transfer, and object push profiles for  
Bluetooth® wireless technology.  
Understanding Your Phone  
12  
   
3. Left Soft Key: Press to the command displayed at the left  
Front Views of Your Phone  
of the bottom line of the display.  
4. Send Key: Press to place or receive a call. Press in standby  
1
mode to launch the Recent Calls list.  
5. Speakerphone Key: Press and hold to enable/disable  
2
speakerphone.  
6. Center Select Key: Press to select the command displayed  
at the center of the bottom line of the display.  
10  
7. Back Key: In a text entry field, press to delete characters. In  
menu mode, press to return to a previous screen or menu.  
3
8. End/Power Key: Ends a call. When navigating, press to  
return to the Home screen. Press and hold to power the phone  
On or Off. When you receive an incoming call, press to send the  
call to Voicemail.  
9
8
7
4
5
9. Right Soft Key: Press to select the command displayed at  
6
the right of the bottom line of the display.  
10. Navigation Key: In menu mode, press to scroll through the  
phone menu. From standby mode, press up or down to  
browse the Quick Launcher, or press left or right for  
shortcuts.  
Features  
1. Earpiece: Allows you to hear callers and alerts.  
2. Display: Displays information to operate your phone.  
13  
 
Keypad  
3. Fn Key: Toggles the text input mode to let you use the  
QWERTY keypad to enter numbers and symbols as well as  
letters.  
1
4. Sym/Lock Key: When entering text, press to launch a  
Symbols screen for selecting symbols. From standby  
mode, press and hold this key to lock the keypad.  
10  
9
2
8
5. Voice SVC Key: From standby mode, press and hold to  
3
4
7
5
6
6. Space/Vibrate Mode Key: Lets you enter spaces between  
words and characters. In standby mode, press and hold to  
activate Vibrate mode.  
7. Calendar Key: Launches you phone’s Calendar tool.  
8. Messaging Key: Launches the Messages menu.  
9. Enter Key: Press to move the insertion point to the next line  
in a message.  
Features  
10. BACK Key: In text entry mode, deletes characters from the  
display. In menu mode, returns you to the previous menu  
or screen.  
1. Voicemail Key: In standby mode, press and hold to dial  
voicemail.  
2. Shift Key: Toggles capitalization for text input.  
Capitalization remains as selected until you press the Shift  
key again.  
Understanding Your Phone  
14  
Features  
Side Views of Your Phone  
1. Volume Key: In standby mode, lets you adjust the System  
Volume. When receiving a call, lets you temporarily mute  
the ringer.  
2. microSD (Memory Card) Slot: Lets you install and remove  
optional microSD Memory Card for additional image/photo  
storage and for music storage.  
3. Camera Key: From standby mode, lights the front display  
backlight and launches the Camera feature of your phone.  
In Camera mode, takes pictures.  
1
2
3
15  
 
Features  
Rear View of Your Phone  
1. Headset Connector: Used to connect an optional headset  
1
(for hands-free operation and/or music playback) or an  
optional TTY device.  
2. Camera Lens: The lens of your built-in camera.  
3. Power/USB Connector: Used to connect charging  
4
2
accessories or optional USB Data cable to your phone.  
4. Speaker: Reproduces music and other sounds played by  
your phone.  
3
Understanding Your Phone  
16  
 
Send Key  
Command Keys  
Left Soft Key  
The Send Key  
(
) is used to answer calls, dial calls, and to  
recall the last number(s) dialed, received, or missed.  
Some functions of the Left Soft Key  
(
) are as follows:  
When receiving a call, press the Send Key once to answer the call.  
In standby mode, enter a number and press the Send Key to make a  
call.  
In standby mode, press the left soft key to open the Main Menu.  
In text input fields, press the Left soft key to select the text input  
method.  
In standby mode, press the Send Key to display the All Calls list of  
calls to and from your phone.  
Right Soft Key  
Some functions of the Right Soft Key  
(
) are as follows:  
Press the Send Key twice in standby mode to call the most recent  
number.  
From the standby mode, press the Right Soft Key functionContacts to  
open your Contacts list.  
With two active calls, press the Send Key to pick up a waiting call.  
Press the Send Key again to switch back to the original call.  
When the Right Soft Key function is Options, press to choose options  
for the current item.  
Volume Key  
Center Select Key  
Use the Volume Key  
(
) to adjust volume:  
Some functions of the Center Select Key  
(
) are:  
In standby mode, press the Volume Key to adjust Master Volume.  
In standby mode, press and hold the Volume Key down to activate  
Sounds Off.  
In a list, press the Center Select Key to view, select, launch, or play a  
highlighted item.  
In a menu, press the Center Select Key to accept the highlighted  
selection.  
During calls, press the Volume Key to adjust voice volume.  
During music playback, press the Volume Key to adjust audio volume.  
Press the Volume Key to mute the ringtone of an incoming call.  
In camera mode, press the Center Select Key to take a photo.  
17  
   
BACK Key  
Camera Key  
In standby mode, press and hold the Camera Key  
located on the right side of your phone.  
When in camera mode, pressing the Camera Key takes a  
picture.  
(
)
The Back Key  
(
) is used to return to a previous menu or  
screen. In some screens, you can also use the key to erase or  
clear numbers, text, or symbols from the display.  
Press the Back Key to back up one menu level.  
Shift Key  
Del Key  
When in a text entry field, press the Shift Key  
(
)
to  
The Delete Key  
symbols from the display.  
(
) is used to erase or clear numbers, text, or  
switch between Abc (initial case), ABC (upper case), and  
abc (lower case) modes. Press twice quickly to lock ABC  
mode, then press again to unlock.  
If you enter an incorrect character, briefly press  
delete) the character.  
to backspace (and  
Fn Key  
To erase the entire sentence, press and hold  
.
While in input mode, the Fn (Function) Key  
input modes between Abc and 123/Sym  
While in standby mode, press and hold the Fn (Function) key to  
(
) lets you toggle text  
End Key  
.
Press and hold the End Key  
Briefly press to disconnect a call.  
to return to standby mode from any menu, or to cancel the  
(
) to turn your phone on or off.  
activate/deactivate Vibrate Mode.  
Press  
last input.  
Understanding Your Phone  
18  
 
Using Menu Shortcuts  
Navigation Key  
In standby mode, press the Navigation key up or down to launch  
the corresponding applications in the pattern shown here.  
Use menu shortcuts to quickly access menus and sub-menus.  
From a numbered menu, press the number to the left of the  
menu label to jump to the desired menu, sub-menu, or feature.  
Shortcut Bar  
Example: To access the Games & Apps sub-menu: Press the right soft key  
Menu  
Games & Apps  
for Games & Apps.  
Browser  
Messages  
Using Shortcut Icons  
You can also access menus and sub-menus using Shortcut Icons,  
and without the menu-based drill down.  
Shortcut Bar  
In standby mode, press the Navigation Key up or down to  
highlight the desired shortcut icon and press OK to launch  
the related application.  
Press the Navigation key up or down to display the Quick  
Launcher menu (if not displayed) and highlight the previous/  
next Shortcut icon.  
Spacebar/Vibrate Mode Key  
Menu Navigation  
In standby mode, press and hold the Spacebar/Vibration Key  
(
)
Access the menus and sub-menus in your phone using the  
Navigation key and soft keys or use a shortcut.  
on the QWERTY keyboard to activate or deactivate Vibrate Only mode.  
In a text entry field press the Spacebar/Vibration Key to insert a space  
between character or words.  
1. In standby mode, press the right soft key Menu. The Main  
Menu (the first of several menus) appears in the display.  
Calendar Key  
2. Use the Navigation key to browse through the menus.  
In standby mode, press the Calendar Key  
QWERTY keyboard to quickly open Calendar function.  
(
)
on the  
3. Press OK  
appearsin the display.  
4. Press to return to the previous menu.  
(
)
to enter the menu or sub-menu that  
19  
 
Message Key  
Dialogue Boxes  
In standby mode, press the Message Key  
QWERTY keyboard to quickly open the Messages menu.  
(
)
on the  
Dialogue boxes prompt for action, inform you of status, or warn  
of situations such as low battery. Dialogue boxes and their  
definitions are outlined below.  
Voice Command Key  
Choice  
In standby mode, press and hold the Voice Command Key  
to activate the Voice recognition feature.  
Example: “Save Message?”  
(
)
Reconfirm  
Speakerphone Key  
Example: “Erase All Messages?”  
Performing  
Example: “Sending...” “Connecting...”  
Completed  
Example: “Message Saved”  
Information  
Example: “New Message”  
Error  
In standby mode, press the Speakerphone Key  
switch between the earpiece and the speakerphone,  
before or during a call.  
(
) to  
Lock/Symbol Key  
In standby mode, press and hold the Lock/Symbol Key  
or unlock the keypad.  
(
) to lock  
When in a text entry field press the Lock/Symbol Key to enter  
symbols. Press the Navigation key left or right to scroll through the  
symbols.  
Example: “System Error!”  
Warning  
Example: “Low Battery,” “Memory Full!”  
Understanding Your Phone  
20  
 
Section 3: Home Display  
1. Annuciator Line: The top line of your phone’s display  
contains icons that indicate network status, battery power,  
signal strength, and more.  
Understanding the Display Screen  
1
2
2. Shortcut Bar: Allows quick access to web base application.  
3. Left Soft Key Function: The bottom line of the display shows  
current soft key function. The sample screen shows that  
pressing the Left Soft Key (Menu) will display the Main  
Menu  
4. Clock Display: Displays the day, date and time.  
5. Right Soft Key Functions: The bottom line of the display  
shows current soft key functions. The sample screen  
shows that pressing pressing the Right Soft Key  
(Contacts) will show the Contacts-Find screen.  
Display Screen Icons  
3
5
4
Your phone can show you definitions of the icons that appear on  
the top line of the display.  
To access the Icon Glossary:  
In standby mode, press Menu (  
Phone Info Icon Glossary. A list appears showing the  
icons that can appear on the top line of the displays.  
)
Settings  
21  
       
Shortcut Bar  
Weather: Displays the current weather.  
Weblinks: Displays links to popular sites.  
Horoscope:Displays daily horoscopes.  
News:Displays news topics.  
Mocospace:Mobilecommunitywhereyoucanmeetpeople,  
chat, share pics and videos and play games on your cell  
phone.  
Local Search: Search for local businesess or resturants.  
Personalize:Configure widgets or download widgets.  
My Account: Displays information about your Cricket  
account.  
Storefront: Purchase Ringback Tones, Graphics, Widgets,  
Tones or Games & Apps.  
Home Display  
22  
 
Section 4: Entering Text  
Entering Text  
Your phone has a QWERTY keypad to support quick and easy text  
input. You can enter text as you would when using a computer  
keyboard.  
While in a text entry field press Symbols to enter special  
characters. Press the Navigation key left or right to scroll  
through symbols. Press Symbols to exit and return to the  
previous screen.  
The keys are labeled with a letter on the lower half and a number  
or symbol on the upper half. Press the key corresponding to the  
character you want to enter. Enter text by pressing the  
appropriate keys on the QWERTY keyboard.  
When in a text entry field press the Left Soft Key  
to display the following:  
Entry Mode  
T9 Word: T9 Word is a predictive text entry mode that recognizes  
common words matching the sequence of your key presses and  
inserts the most common word into your text. T9 Word requires only  
one key press per letter of the word, and is much faster than traditional  
text entry.  
Use these keys to enter special characters:  
Backspace: Press to delete the previous character.  
Press and hold to delete the previous word.  
Abc: Abc mode is standard text entry mode for mobile telephones, and  
is the default text entry mode when using the external keypad.  
123/Sym: Use 123 mode to enter numbers into a text field.  
Enter: Press to move to the next line of text.  
Shift: Press to switch between Abc (initial case), ABC  
(upper case), and abc (lower case) modes. Press  
twice quickly to lock ABC mode, then press again to  
unlock.  
Space: Press to insert a space.  
Function:Press tocyclethroughtextentrymodesabc  
or 123/SYM.  
23  
     
Symbols: Use Symbols mode to enter common symbols into a text  
field.  
Note: To enter, press the key for the number corresponding to a symbol.  
Shortcuts: Use shortcut to quickly enter a domain name.  
Note: To enter, press the key for the number corresponding to a shortcut.  
Emoticons: Use Emoticons mode to enter smiley symbols into a text  
field.  
Note: To enter, press the key for the number corresponding to a emoticon.  
Entering Text  
24  
Section 5: Call Functions  
This section provides procedures for making and answering  
calls. This section also describes features, such as call logs and  
call timers, that help you make calls and manage your call time.  
Manual Pause Calling  
To manually call a number with pause(s) without storing it in your  
Contacts list:  
Making a Call  
1. In standby mode, enter the number you wish to call.  
1. With the phone on, enter the number you wish to call using  
2. Press Options  
(
). The following options appear in the  
the keypad.  
display:  
2. Press Send  
(
) to place the call.  
• 2-Sec Pause: A 2-second pause after which dialing resumes.  
Wait: A hard pause (waits for input from you).  
Three-way Calling  
3. Highlight and press the Center Select Key  
(
) to select  
Call two other numbers and connect them to your call using  
three-way calling.  
the desired option.  
4. Press Send  
(
) to call the number.  
1. In standby mode, enter the number for the first party in  
your call, then press Send  
2. When connected, ask the other party to remain on the line.  
Press Send ) to place them on hold.  
3. Enter the second party’s phone number and press Send  
).  
(
).  
Tip: Press Save to store pauses along with the number if you plan to call the  
number frequently.  
(
(
4. When the second party answers, press Send  
(
) to  
connect all three parties.  
25  
         
3-Touch Dialing  
Speed Dialing  
Speed Dialing lets you place a call to any Contact stored in your  
Contacts list by dialing the Contact’s Location number.  
Use 3-touch dialing to speed dial Contacts from 100 through 999.  
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
1-Touch Dialing  
Use 1-touch dialing to speed dial Contacts from 1 (Voicemail)  
through 9.  
2. Press the number key representing the second digit of the  
desired Contact’s speed dial number.  
In standby mode, press and hold the number key  
3. Press and hold the number key representing the third digit  
corresponding to the desired Contact’s speed dial number.  
of the desired Contact’s speed dial number.  
2-Touch Dialing  
Answering a Call  
Use 2-touch dialing to speed dial Contacts from 10 through 99.  
Press Send  
(
) to answer an incoming call.  
1. In standby mode, press and release the number key  
representing the first digit of the desired Contact’s speed  
dial number.  
Note: To choose other options for answering calls, see “Call Answer” on  
2. Press and hold the number key representing the second  
Sending Calls to Voicemail  
digit of the desired Contact’s speed dial number.  
Use one of these methods to ignoring an incoming call and send  
it directly to voicemail:  
Press Ignore  
(
)
to send the call to voicemail.  
Tip: To silence the ringer on an incoming call, press Quiet (  
the down on the Volume key ) .  
), or press  
(
Call Functions  
26  
     
Answering Call-Waiting Calls  
Voice Commands  
When you receive a call while on a call:  
Voice Commands is advanced speech recognition software that  
recognizes your spoken commands to dial phone numbers,  
create messages, and launch phone features such as Contacts,  
Calendar and My Music.  
Press Send  
call.  
(
)
to place the first call on hold and answer the new  
Press Send  
(
)
again to return to the first call.  
To use Voice Commands, speak naturally into your phone, at a  
distance of 3-12 inches. There is no need to “train” Voice  
Commands, it is designed to recognize natural speech.  
Call In-Progress Options  
You can access menus and features while in a call:  
Press Options  
(
) for these options.  
In standby mode, press and hold Voice Commands  
(
).  
• Messages: Display the Messages menu.  
• Contacts: Diplay the Contacts menu.  
• Recent Calls: View Recent Calls log.  
Note: At each step, Voice Commands displays a list of available commands.  
If Voice Commands does not recognize your command, it will prompt  
you to confirm.  
• Send DTMF: Send your phone number as DTMF tones to the other  
person on the call.  
• Location: Turn your GPS location or set GPS location for emergency  
calls only.  
Tip: Press the Right Soft Key  
Help at any time to display helpful tips for  
using Voice Commands.  
To control whether the other caller can hear you, press the  
The following is a list of functions that you can perform with  
Voice Commands:  
Mute  
/
Unmute  
(
).  
Call <Name or Number>: Place a call to a saved contact, to a  
telephone number, or to voicemail.  
Send Text <Name or Number>: Create a text message to a saved  
contact, or to a telephone number.  
27  
         
Send Picture <Name or Number>: Create a picture message to a  
saved contact, or to a telephone number.  
Send Text <Name or Number>  
Create a new message by speaking the type of message and the  
recipient(s).  
Lookup <Name>: Search for items in your phone’s memory.  
Go To <Menu>: Open any application installed on your device.  
Check <Item>: View details about your phone’s status  
1. In standby mode, press and hold Voice Commands  
(
).  
The audio prompt “Please say a command.”sounds and the  
Call <Name or Number>  
Voice Commands display.  
Place a call by speaking a contact name or telephone number.  
2. Say “Send Text”.  
1. In standby mode, press and hold Voice Commands  
(
).  
3. At the prompt, say the contact name, telephone number, or  
The audio prompt “Please say a command.”sounds and the  
contact group.  
Voice Commands display.  
4. The new message opens, with the To: field populated with  
2. Say “Call”, followed by:  
your selection(s). Continue creating the message.  
“< A Contact Name>”, to call the default telephone number for a  
contact. Or, say “Call”, followed by the type of number, Mobile 1,  
Home, or Business.  
“<Telephone Number>” to dial phone number.  
Voicemail” to access voicemail.  
3. Follow the prompts to confirm your selection and place the  
call.  
Call Functions  
28  
   
Send Picture <Name or Number>  
Go To <Menu>  
Create a new message by speaking the type of message and the  
recipient(s).  
Access a menu item by speaking the menu’s name.  
1. In standby mode, press and hold Voice Commands  
(
).  
1. In standby mode, press and hold Voice Commands  
(
).  
The audio prompt “Please say a command.”sounds and the  
The audio prompt “Please say a command.”sounds and the  
Voice Commands display.  
Voice Commands display.  
2. Say “Go to”, followed by the name of a menu item, for  
2. Say “Send Picture”.  
example, “Contacts”, “Recent Calls“, “Messaging“,  
3. At the prompt, say the contact name, telephone number, or  
Multimedia“, “Settings”, “Navigator”, “Tools“, “Browser“,  
contact group.  
or “Games & Apps“. The item opens.  
4. The new message opens, with the To: field populated with  
your selection(s). Continue creating the message.  
Look Up  
Search for information on your phone by saying the name of the  
searched item.  
1. In standby mode, press and hold Voice Commands  
(
).  
The audio prompt “Please say a command.”sounds and the  
Voice Commands display.  
2. Say "Look up".  
3. Say the name of the item to be search, and follow the  
Voice Commands prompts.  
29  
     
Check <Item>  
Voice Commands Settings  
Access device information by speaking the command.  
Configure the Voice Commands feature of your phone.  
1. In standby mode, press and hold Voice Commands  
(
).  
1. In standby mode, press Menu (  
Voice SVC Voice Settings  
2. Select a setting for customization:  
)
Tools  
The audio prompt “Please say a command.”sounds and the  
.
Voice Commands display.  
2. Say “Check”, followed by a command:  
• Choice Lists: When voice recognition is not confident it has  
recognized a name or number correctly, it will show you a list of up  
to three choices.  
• Status: Displays and announces all phone status indicators.  
• Signal Strength: Displays and announces the current 1x signal  
strength level.  
• Sensitivity: Controls how voice recognition determines when a  
spoken word is a match. If you frequently experience the  
messages “Please repeat...” or “No Match Found,” adjust the  
sensitivity.  
• Coverage: Displays coverage status.  
• Battery: Displays and announces the current battery level.  
• My Phone #: Displays and announces your phone number.  
• Digit Dialing:Use the Digit Dialing menu to adapt digit dialing to  
your voice.  
• Sound: Set sounds for voice command features.  
• Voice Launch: Select the method for launching Voice Commands.  
Choose Voice Key Only to launch with the Voice Commands key.  
Choose Voice Key/Ear Mic to launch with the Voice Commands key,  
OR with headset controls when you attach an optional headset.  
• About: View information about Voice Commands.  
Call Functions  
30  
   
Section 6: Recent Calls  
The Recent Calls menu retains information about Outgoing,  
Incoming, and Missed calls. You can also view times for your last  
call and the time totals for all calls.  
Creating or Updating Contacts Using Recent  
Calls  
1. In standby mode, press Menu (  
)
Recent Calls  
Accessing Recent Calls  
.
In standby mode, press Menu (  
)
Recent Calls  
– or –  
.
In standby mode, press Send  
2. Find a call from Outgoing Calls  
Calls, or All Calls  
3. Highlight a call record, then press Options  
4. Use the Directional Keys to highlight Create New or Update  
(
).  
– or –  
,
Incoming Calls  
,
Missed  
In standby mode, press Send  
(
).  
.
(
) Save.  
Making Calls Using Recent Calls  
1. In standby mode, press Menu (  
Existing, then press the Center Select Key  
(
).  
)
Recent Calls  
.
5. Continue entering contact information.  
– or –  
In standby mode, press Send  
2. Find a call from Outgoing Calls  
Calls, or All Calls  
3. Highlight a call record, then press Send  
(
).  
,
Incoming Calls Missed  
,
.
(
).  
31  
       
Deleting Recent Calls Records  
1. In standby mode, press Menu (  
)
Recent Calls  
.
– or –  
In standby mode, press Send  
2. Find a call from Outgoing Calls  
Calls, or All Calls  
3. Highlight a call record, then press Options  
4. At the Erase entry? prompt, press Yes  
the Center Select Key ).  
Deleting All Recent Calls Records  
(
).  
,
Incoming Calls  
,
Missed  
.
(
) Erase.  
(
), then press  
(
1. In standby mode, press Menu (  
)
Recent Calls  
.
– or –  
In standby mode, press Send  
2. Find a call from Outgoing Calls  
Calls, or All Calls  
3. Highlight a call record, then press Options  
all  
4. At the Erase all entries? prompt, press Yes  
press the Center Select Key ).  
(
).  
,
Incoming Calls Missed  
,
.
(
) Erase  
.
(
), then  
(
Recent Calls  
32  
   
Section 7: Messages  
This section explains how to send or receive different types of  
messages. This section also describes the features and  
functionality associated with messaging.  
Create and Send Text Messages  
1. IIn standby mode, press Menu (  
Send Message Text Message  
2. Enter the phone number or e-mail address of the recipient  
or press Add to select recipients from:  
)
Messages  
.
Accessing Messages  
In standby mode, press Menu (  
)
Messages  
.
(
)
• Contacts: Choose contacts from the Contacts List.  
• Groups: Choose a contacts Group.  
– or –  
In standby mode, use the Message Key  
(
) on the  
QWERTY keyboard to quickly open the Messages menu.  
• Recent Calls: Choose numbers from Recent Calls.  
3. Press the Center Select Key  
(
). The Text: appears in the  
Types of Messages  
Your phone can send and receive:  
display. Enter the text content of your message using the  
keypad.  
Text Messages  
Picture Messages  
33  
             
4. At any point while composing a message:  
Creating and Sending Picture Messages  
Send Picture messages to recipients with a compatible phone or  
other device, and accompany a Picture message with a voice  
memo, ringtone, or downloaded melody.  
To change the text entry mode, press Abc  
desired text entry mode.  
(
)
and select the  
To complete the message text and set message send options,  
press Options . The following options appear in the display:  
Add Preset Msg: Insert pre-composed text into your message.  
(
)
Tip: You can send a Picture message to up to ten recipients. Enter each  
recipient’s address or phone number in a separate Send To field of the  
Picture message composer.  
Save As Draft: Save the message to your Drafts box.  
Save As Preset Save the message as a preset message.  
Add To Contacts: Save the recipient’s number or e-mail address as a  
1. In standby mode, press Menu (  
Send Message Picture Message  
2. Enter the phone number or e-mail address of the recipient  
using the keypad, then press the Center Select Key ).  
)
Messages  
Contacts list entry.  
.
Delivery: Set delivery paremeters.  
Cancel Msg: Cancels message or save the message to the Drafts  
(
folder.  
Tip: Press Add to display a pop-up menu containing: Contact Groups, and  
,
5. Once you’re finished entering your message, press Send  
).  
Recent Calls. These options allow you to find and add recipients to the  
(
To: list.  
3. The Subject: field appears in the display. Enter a subject  
for the Picture message using the keypad.  
4. Highlight the Text: field, then enter the message text using  
either keypad.  
Messages  
34  
   
5. Highlight the PIC: field, then press Picture (  
). A photo  
Receiving Messages  
gallery of thumbnail images appears in the display.  
When you receive a message in standby mode or in a call, the  
ringer sounds (unless turned off) and New Message appears in  
the display. The date and time of the message also appear in the  
display along with the following options:  
Press View  
(
)
to expand the highlighted picture for easier  
viewing.  
Highlight a picture and press the Center Select Key  
the picture into your message.  
(
) to insert  
View Now: Opens the message, where you have the option to  
Forward, Reply With Copy, Save As Preset, Lock, Add To Contacts,  
Message Info, or Extract.  
Press Camera  
message.  
(
)
to capture a photo to insert into the picture  
6. Highlight the Sound: field, then press Sounds  
(
). The  
View Later: Saves the message to your inbox, where you can view it  
My Ringtones screen appears in the display.  
later, then returns your phone to standby mode.  
Highlight and ringtone and press the Center Select Key  
insert the preloaded or recorded ringtone.  
(
) to  
) to  
Select the option of your choice.  
Highlight Record New and press the Center Select Key  
(
record a new voice memo, then select the new recorded sound file  
to add it to the message.  
35  
   
Save Sound (Picture Messages Only): Save the audio file (sound)  
Message Boxes  
Your phone stores messages in any one of five message boxes.  
The subsections that follow describe each message box in detail.  
included in this message to the My Sounds folder.  
Save As Preset: Save the text in this message as a new Quick  
Text.  
Inbox  
Lock/Unlock: Block/permit erasure of the message.  
Received messages of all types (except Voicemail) are stored in  
the Inbox.  
Add To Contacts: Save the sender’s number to your Contacts.  
Message Info: Shows message delivery status, addressee, size,  
and so on.  
1. In standby mode, press Menu (  
)
Messages  
Inbox.  
Extract: Call the sender of the received message. Extract  
4. Select an option to perform its function.  
Tip: While in a call, press Options, then select Messages  
.
Messages and Lock Mode  
2. Highlight the message you wish to view, then press OPEN  
to view contents of the highlighted message.  
Your phone can still receive messages while in Lock Mode. The  
time and date of the message appear in the display, but you  
cannot access the message until you enter the lock code.  
(
)
3. While viewing your message, press Options (  
). The  
following options may appear in the display:  
• Play again (Picture Messages Only): Replay the sound attached to  
the message.  
Forward: Send a copy of this message to another recipient.  
Reply With Copy (Text Messages Only): Compose and send a  
reply message to the originator of the received message and  
include a copy of the original message.  
Save Pic (Picture Messages Only): Save the picture included in  
this message to the My Images folder.  
Messages  
36  
       
Managing Inbox Messages  
Outbox  
1. In the Messages menu, select Inbox. The Inbox appears in  
Your phone stores messages in the Outbox, regardless of  
whether the message was successfully transmitted. Verify if and  
when a message or e-mail was successfully received by enabling  
the Enh. Delivery Ack/Delivery Ack feature.  
the display showing a list of received messages.  
2. Highlight a message in the list. You have the following  
options:  
Managing Outbox Messages  
To remove the highlighted message from the Inbox, press Erase  
(
).  
1. In the Messages menu, select Outbox. Your list of sent  
To review the highlighted message, press OPEN  
(
).  
messages appear in the display.  
For more options, press Options  
appear in the display:  
(
). The following options  
2. Highlight a message in the list. You have the following  
options:  
Reply: Compose and send a reply message to the originator of the  
received message.  
To remove the highlighted message from the Inbox, press Erase  
(
).  
Reply With Copy (Text Messages Only): Compose and send a reply  
message to the originator of the received message and include a copy  
of the original message.  
To review the highlighted message, press OPEN  
(
).  
For more options, press Options  
appear in the display:  
(
). The following options  
Forward: Send a copy of this message to another recipient.  
Forward: Send the highlighted message to another recipient.  
Lock/Unlock: Block/permit erasure of the highlighted message.  
Resend: Send another copy of the highlighted message to the original  
Add To Contacts: Save the sender’s number to your Contacts.  
recipient.  
Erase Multiple: Delete selected unlocked messages from the Inbox.  
Lock/Unlock: Block/permit erasure of the highlighted message.  
Message Info: Shows message delivery status, addressee, size, and  
Add To Contacts: Save the recipient’s number to your Contacts.  
so on.  
Erase Multiple: Select unlocked messages for deletion.  
Select an option to perform its function.  
Message Info: Shows message delivery status, addressee, size, and  
so on.  
Select an option to perform its function.  
37  
           
View and Edit Draft Text Messages  
Draft Box  
1. In the Messages menu, select Drafts. A list of draft  
Messages in the Draft Box are those that have been composed  
but never sent. You can return to the Draft Box at any time to  
view, edit, or send a draft message.  
messages appears in the display.  
2. Highlight a text message that you wish to view or edit, then  
press EDIT  
display.  
(
). The Create Txt Msg screen appears in the  
Create a Draft Message  
1. In the Messages menu, select Send Message and then  
3. Enter or change the recipient’s number and/or e-mail  
select one of the following Send Message options:  
address and the message text using the keypad.  
Text Message  
4. Press OK  
(
)
to move to the next field.  
Picture Message  
5. To complete the message text and set message send  
options, press Options. The following options appear in  
the display:  
The Create Txt Msg/Create Pic Msg screen appears in  
the display showing the To: list.  
2. Enter the phone Number or Email address of a recipient,  
• Add Preset Msg: Insert pre-composed text into your message.  
then press OK  
(
).  
• Save As Draft: Save the message to your Drafts box.  
Tip: Press Add to display a pop-up menu containing: Contacts Groups, and  
,
• Save As Preset: Save message as a preset message.  
Recent Calls. These options allow you to find and add recipients to the  
Send To: list.  
• Add To Contacts: Save the recipient’s number or e-mail address to  
your Contacts.  
3. Compose your message using the keypad, press Options,  
• Delivery: Set delivery paremeters.  
then select Save As Draft. “Message saved in drafts  
• Cancel Msg: Cancels message or save the message to the Drafts  
folder.  
appears in the display and your message is saved to the  
Drafts box.  
6. Select an option to perform its function.  
7. When you have completed composing your message,  
press SEND to send it.  
Messages  
38  
     
View and Edit Draft Pic. Messages  
4. Select an option to perform its function.  
5. When you have completed composing your message,  
1. In the Messages menu, select Drafts. A list of any draft  
press SEND to send it.  
messages appears in the display.  
Managing Draft Messages  
2. Highlight the picture message that you wish to view, then  
press EDIT  
the display.  
(
). The Create Pic Msg screen appears in  
1. In the Messages menu, select Drafts. A list of any draft  
messages appears in the display.  
3. Make any needed changes and press Options (  
). The  
2. Highlight a message, then do one of the following:  
following options appear in the display:  
To remove the highlighted message from the Drafts box, press  
Erase  
Preview: Shows the message contents.  
(
).  
• Add Preset Msg: Insert pre-composed text into your message.  
To access other options, press Options  
(
). The following  
options appear in the display:  
Save As Draft: Saves the changed message to the Draft Box.  
Priority Level: Choose Urgent Normal, or Low  
Send: Send the highlighted message to the number or e-mail address  
currently included with the message.  
Lock Unlock: Block/permit erasure of the highlighted message.  
,
.
Validity Period: Enter the Date when this message will cease to  
be valid, then use the Left and Right navigation keys to choose the  
/
Add To Contacts: Save the recipient’s number and/or e-mail address  
Time  
.
to your Contacts.  
Delivery Ack: Requests confirmation when your message is  
received.  
Save As Preset: Save the message text as Quick Text for insertion into  
other messages.  
Remove Pic: Remove image included in draft message.  
Erase Multiple: Delete selected unlocked draft messages.  
Remove Sound: Remove sound file included in draft message.  
Select an option to perform its function.  
• Add Slide: Add another picture, text, and sound to this message.  
• Erase Slide: Remove a slide added to this message.  
Add To Contacts: Save the recipient’s number or e-mail address  
to your Contacts.  
39  
 
Voicemail  
Erase Messages  
Messages in your voice mailbox are logged in the Voicemail box  
of the Messages menu. Open the Voicemail box to view the  
details of the Voicemail message.  
You can erase all of the messages in any or all of message boxes  
using one convenient sub-menu.  
Note: This function erases all messages in the selected message box. To  
delete a single message, go to the respective message box, highlight  
the message, and press Erase. (For more information, refer to  
When you’re notified of a new voicemail message by an alert  
tone and the new message icon, the following options pop:  
Listen Now: Calls your voice mailbox and lets you listen to your  
messages.  
1. In standby mode, press Menu (  
)
Messages  
Listen Later: Returns you to standby mode where you can choose to  
call your mailbox and review your messages at a later time.  
Erase Messages. The following options appear in the  
display:  
Tip: You can also access your voicemail from standby mode, by pressing and  
holding to speed call your voice mailbox.  
Inbox: Deletes all unlocked messages stored in the Inbox.  
Outbox: Deletes all unlocked messages stored in the Outbox.  
Drafts: Deletes all unlocked messages stored in the Drafts box.  
Social Networking  
Social Networking provides a single point for accessing online  
communities and content. You can save your usernames (but not  
All Messages: Deletes all unlocked messages stored except  
Voicemail.  
passwords) to allow faster sign-in to Facebook  
Twitter  
In standby mode, press Menu (  
Social Networking  
,
MySpace and  
2. Select the message box containing the messages you  
want to delete and press theCenter Select Key ) .  
You’re prompted to confirm the erasure of all messages in  
the selected box or in all boxes. Press Yes ( ) t o delete  
.
(
)
Messages  
.
the messages or press No (  
)
to cancel deleting the  
messages.  
Messages  
40  
             
• Message View: Choose a message view. With Message View set  
to Chat, multiple text messages exchanged with a single addressee  
appear as a chat session. With Message View set to Normal, view  
messages individually.  
Msg Settings  
In standby mode, press Menu (  
)
Messages  
Msg Settings. The following options appear in the  
display.  
Notification: Allows you to set how you are notified of new  
messages.  
Auto Save: Choose whether your messages are saved  
automatically when you exit them.  
Auto Erase Choose to receive or not to receive a warning  
:
message when you delete a message.  
Auto View: Allows you to view the full content of a text message  
as the messages is received.  
Entry Mode: Choose the default method for entering text into  
messages.  
CB #: Choose or create a callback phone number to be included  
with outgoing messages.  
VM #: Edit or view your Voicemail number.  
Signature: Choose to include a text signature in outgoing  
messages.  
Preset Msgs: View preloaded messages or create new messages.  
Auto Scroll: Allows you to view the full content of a text message  
automatically rolls upward on the display.  
• Messaging Font Size: Choose a message font size.  
41  
   
Section 8: Contacts  
This section details how you can manage your daily contacts by  
storing their names and numbers in your Contacts list. You can  
have your Contacts entries sorted by name.  
Finding a Contacts Entry  
1. In standby mode, press Contacts  
– or –  
(
).  
Accessing Contacts  
In standby mode, press Menu (  
)
Contacts  
In standby mode, press Menu (  
)
Contacts  
.
Find  
.
– or –  
The Find screen appears in the display with the Go To field  
In standby mode, press Contacts (  
).  
and the first Contacts entry highlighted.  
2. Enter a name. As you enter letters, the closest match  
appears in the display.  
3. When the desired entry is listed in the display, highlight the  
entry or use the navigation key to scroll through the  
contacts numbers and press Send  
(
) to the selected dial  
the number.  
Press Edit  
(
)
to add or change information for this entry.  
Press VIEW  
(
)to show information about this entry.  
Contacts  
42  
         
Press Options  
(
)
for additional options that may appear in  
Adding a New Contacts Entry  
the display.  
You can use either of two methods to add an entirely new entry to  
Contacts.  
New Contact: Add a new entry to Contacts.  
Dial Method  
Erase Multiple: Erase one or more selected Contacts entries.  
Send Txt Msg: Create and send a Text message to the selected  
1. In standby mode, enter the number you wish to add to your  
Contact.  
contacts.  
Send Pic Msg: Create and send a Picture message to the selected  
2. Press Save (  
)
Create New. The Create New screen  
Contact.  
appears in the display showing the following icons:  
Call: Dial the number associated with the name.  
Send Name Card Via Bluetooth: Send a copy of a Contacts entry to  
Mobile  
Pager  
Home  
Fax  
Work  
another Bluetooth device.  
3. Select the number type that matches your new entry.  
4. Enter a name to associate with the Contacts entry.  
Press SAVE  
(
) to save the new entry.  
43  
         
Menu Method  
Editing a Contacts Entry  
1. In standby mode, press Menu (  
)
Contacts  
1. In standby mode, press Menu (  
)
Contacts  
Add New Contacts  
.
Find  
.
The Add New Entry screen appears in the display with the  
2. Highlight the entry and press VIEW  
(
). The View  
Name field highlighted.  
Contact screen appears in the display showing the  
highlighted entry’s information.  
2. Enter the name of the new entry using the keypad.  
3. Press EDIT (  
). The Edit Contact screen appears in the  
Highlight one of the following fields:  
display.  
Mobile  
Home  
Work  
Pager  
Email  
Group  
Ringtone  
Fax  
4. Highlight the particular information you want to edit  
To backspace and delete numbers or letters, press  
To clear all numbers or letters in the highlighted field, press and  
hold  
Press Options  
.
Picture  
.
(
), the following options appear in the display:  
3. Enter a phone number e-mail address or picture in the  
Set Speed Dial/Remove speed dial: Assign/remove a speed dial  
highlighted field.  
4. Repeat steps 3 and 4 as needed.  
Set as default: Set the number the phone will dial when Contacts  
dialing, speed dialing, or voice dialing.  
5. Press SAVE  
(
) to save the new entry.  
Wait: A hard pause (waits for input from you).  
2-Sec Pause: A 2-second pause after which dialing resumes.  
Select the desired option.  
5. When you’re finished changing the contents of a field,  
press SAVE ). Your changes are saved and a  
(
Contacts  
44  
     
Create a New Entry  
Saving a Number After a Call  
4. From the Save screen, select Create New. The Create  
New screen appears in the display showing the following  
number type options:  
Once you finish a call, you can store the caller’s number to your  
Contacts list.  
Note: If the call was incoming and Caller ID information was unavailable,  
then the Save option is also unavailable.  
Mobile  
Pager  
Home  
Fax  
Work  
1. Press End  
(
) to end your call. The call time, length of  
call, phone number, and name of the party (if available)  
appear in the display.  
1. Select the number type that matches your new entry.  
2. Enter a name for the new entry.  
2. Press Save. The Save screen appears in the display  
showing the following options:  
3. Press SAVE to save the new entry to your Contacts list.  
Create New: Lets you create a new Contacts entry.  
Update Existing: Lets you add the number you entered to an  
existing Contacts entry.  
3. Select the desired option, then follow the instructions in  
the upcoming sub-sections depending on whether the  
number is a new entry or you are adding it to an existing  
entry.  
45  
         
Add to an Existing Entry  
Speed Dial  
1. From the Save screen, select Update Existing. The  
Update Existing screen appears in the display showing  
your Contacts list with the Go To field and the first  
Contacts entry highlighted.  
Speed Dials are 1-, 2- or 3-digit shortcuts you assign to contacts,  
to allow you to quickly call the contact.  
Note: Some Speed Dials are reserved by default, and cannot be assigned:  
Speed Dial 1 is reserved for Voicemail. Speed Dial 211 is reserved for  
information about health and human services, 311 for non-  
emergency municipal services; 411 for directory assistance; 611 for  
customer service access; and 911 for emergencies.  
2. Find and select the Contacts entry to which you want to  
3. The following number type options appear in the display:  
To speed dial the Contacts entry assigned to Location 5, press and hold  
, (1-touch dialing).  
Mobile  
Pager  
Home  
Fax  
Work  
To speed dial the Contacts entry assigned to Location 35, press  
then press and hold , (2-touch dialing).  
To speed dial the Contacts entry assigned to Location 235, press  
press , then press and hold , (3-touch dialing).  
,
,
Number types that are already assigned a number show  
the number instead of the number type label.  
4. Select the desired unassigned number type. The Contacts  
entry information appears in the display with the new  
number posted in the appropriate number type field.  
5. Press SAVE to save your changes to the existing entry.  
Contacts  
46  
       
Assigning a Speed Dial Location  
Removing a Speed Dial Location  
1. In standby mode, press Menu (  
)
Contacts  
To assign a Speed Call number to a new Contacts entry number,  
do the following:  
Find  
2. Highlight the desired entry, then press Edit (  
3. Highlight the number field marked by the Speed Dial icon  
).  
4. Press Options (  
.
).  
1. In standby mode, press Menu (  
Speed Dial  
2. Highlight a speed dial location, or enter the speed dial  
digits into the Go To field, then press SET ( ).  
)
Contacts  
.
(
)
Remove speed dial. “Remove  
speed dial?” prompts you to confirm your desire to  
remove the entry.  
3. At the Set Speed Dial screen, highlight a contact, or enter  
the first few characters into the Go To field.  
5. Press Yes (  
)
to remove the Speed Dial assignment.  
4. At the Set speed dial to contact? prompt, highlight  
Speed Dial Removed” pops up in the display, and you  
Yes  
(
).  
are  
47  
Add Contacts Entry to a Group  
Groups  
Using Add New/Edit Contact Option  
Groups let you easily send messages to multiple, selected  
Contacts. You can also use Groups to find Contact entries and to  
add/remove Contacts names in a Group or to create or rename a  
Group.  
To add a Contact to a Group using either the Add New Contact  
option or the Edit Contact option, do the following:  
1. In standby mode, press Menu (  
)
Contacts  
.
Viewing Groups  
2. Higlight and contact and press VIEW  
(
) ➔  
EDIT  
(
).  
Note: This procedure uses the QWERTY keyboard and command keys. Rotate  
3. Highlight the Group field, then press Set (  
).  
the phone and slide it open to access the QWERTY keyboard.  
The Select Group screen appears in the display showing  
groups similar to the following:  
1. In standby mode, press Menu (  
)
Contacts  
Group.  
No Group  
Business  
Colleague  
Family  
2. Available groups appear in the display. These groups are  
available by default:  
No Group  
Business  
Colleague  
Family  
Friends  
4. Select the Group to which you want to assign the selected  
Contact.  
You are returned to the Add New Entry/Edit Contact  
screen and the selected Group name populates the Group  
field.  
Friends  
3. Highlight a group, then press VIEW  
(
) to display a list of  
group members.  
5. Press  
to save your changes.  
Contacts  
48  
   
Using Group Add Option  
3. When you have marked the Contacts you want to add to  
the group, press Done. “Contact added to group”  
appears in the display, followed by the selected Group list  
including the added Contacts.  
The Add option lets you add one or more existing Contacts to a  
Group.  
1. In standby mode, press Menu (  
)
Contacts  
Rename a Group  
Group.  
The Rename option lets you change the name any of the Groups,  
The Group List screen appears in the display showing  
except No Group.  
Groups similar to the following:  
No Group  
Business  
Colleague  
Family  
1. In standby mode, press Menu (  
)
Contacts  
Group. The Group List screen appears in the display.  
2. Highlight a Group name (other than No Group) that you  
wish to change, then press Options (  
)
Rename.  
The Rename Group screen appears in the display.  
3. Enter changes to the group name using either keypad.  
4. When you have completed your changes to the Group  
Friends  
2. Highlight a Group, then press Options (  
)
Add. The  
Add Contacts screen appears in the display showing all  
name, press SAVE (  
).  
Contacts entries.  
Highlight a Contacts entry you want to add to the group, then press  
MARK . A checkmark appears in the entry’s checkbox.  
Group Renamed” appears in the display followed by the  
Group List screen showing your renamed Group.  
(
)
Repeat as needed to check all the desired Contacts.  
Press Options Mark All to mark all Contacts.  
Note: To unmark a marked Contact, highlight the Contact and press MARK  
) to clear the checkmark. To unmark Contacts, press Options  
Mark All  
(
49  
Add a New Group  
Deleting a Contacts Entry  
1. In standby mode, press Menu (  
)
Contacts  
1. In standby mode, press Menu (  
)
Contacts  
Group. The Group List screen appears in the display.  
find the Contacts entry you want to delete.  
2. Press New (  
). The New Group screen appears in the  
2. Highlight the desired entry, then press Options (  
)
display.  
Erase Multiple.  
3. Enter a new group name using either keypad.  
4. Press SAVE ( ). Group Saved” appears in the display  
followed by the Group List screen showing your new  
3. Highlight and press the Center Select Key  
(
) to select  
the Contact entry you want to erase.  
4. Press Done  
(
). You are prompted to confirm the  
Group.  
erasure.  
5. Press Yes (  
)
to confirm erasure of the selected  
to retain the Contact.  
Erase a Group  
Contact. Press No (  
)
The Erase option lets you delete a Group, thus freeing you to  
reassign the Contacts formerly in the Group.  
Memory Info  
The Memory Info menu option lets you view the amount of  
memory you have used to store Contacts entries, as well as the  
memory remaining to store more Contacts entries.  
1. In standby mode, press Menu (  
Group. The Group List screen appears in the display.  
2. Highlight the Group you wish to delete, then press Options  
Erase.  
You are prompted to confirm the Group erasure.  
3. Press Yes ( to confirm erasure of the highlighted  
Group. Press No ( to retain the Group.  
4. The deleted Group entries entries return to No Group  
)
Contacts  
In standby mode, press Menu (  
)
Contacts  
(
)
Memory Info.  
The Memory Info Contacts screen appears in the display  
showing the amount of memory Used and remaining for  
Contacts entries.  
)
)
.
Contacts  
50  
       
Section 9: Multimedia  
Use your Comment to take full color digital pictures, display them  
on your phone’s vivid color display, and instantly share them with  
family and friends.  
Point, Click, and Send Pictures  
1. In standby mode, press and hold the Camera Key  
(
)
on the right side of the phone.  
Accessing Multimedia  
2. Press the Camera Key  
(
) or press the Center Select  
In standby mode, press Menu (  
)
Multimedia  
.
Key ) to capture a photo.  
(
The picture is saved and the Create Pic Msg screen  
appears in the display.  
– or –  
In standby mode, press and hold the Camera Key  
on the right side of the phone.  
(
)
3. Enter the phone number or e-mail address of the recipient  
or press Add  
(
)
to select recipients from:  
Camera  
Taking Snap Shots  
• Contacts: Choose contacts from the Contacts List.  
• Groups: Choose a contacts Group.  
To take a single picture using the current camera settings, do the  
following:  
• Recent Calls: Choose numbers from Recent Calls.  
4. Press OK  
(
).  
1. In standby mode, press and hold the Camera Key  
(
)
5. Select other message fields as needed.  
on the right side of the phone.  
6. When you are finished composing your message, press  
2. Using the display as a viewfinder, point the camera at your  
SEND  
(
) to send the Picture message to the intended  
subject.  
recipient(s).  
3. When the image that you wish to capture appears in the  
display, press the Camera Key  
Select Key ).  
(
) or the Center  
(
51  
           
Camera Options  
Self Timer: Set a timer for a delay between pressing  
In standby mode, press and hold the Camera Key  
on the right side of the phone.  
(
)
the Camera Key and the taking of the photo. Choose  
a timer of 2 Seconds  
,
5 Seconds, or 10 Seconds, or  
choose Off  
.
Press My Images  
Press the Center Select Key  
Press to display camera options.  
Shooting Mode  
to display the image gallery.  
(
) to take a picture.  
Color Effect: Set the Camera to replace photo colors with  
Normal colors, Black&White Sepia Negative Green, or  
Aqua  
,
,
,
.
Reset Settings: Returns camera setting to the  
Single Shot: Takes one photo.  
defaults.  
Series Shot: Takes a series of of pictures.  
Memory: Set the Camera to save photos to Phone or  
Card memory.  
Mosaic Shot Combines from 4 to 9 shots into a  
:
single picture, depending upon which one of 18  
available Mosaic layouts you select.  
Auto Save: Set the Camera to automatically save (On  
photos when taken or Off  
Icon Display: Set the Camera to Display All icons,  
display a Guideline grid, or No Icons  
Shutter Sound: Set the Camera’s shutter sound to Off  
Shutter OK, or DingDong  
Reset Settings: Reset all Camera settings to default  
values (Yes) or No  
)
.
Resolution:Choosea resolution for newphotos, from  
1280x960 640x480 320x240 or 176x144  
,
,
.
.
,
Quality: Set image quality, from SuperFine  
Normal  
,
Fine or  
,
.
.
White Balance: Choose a setting for the light source,  
from Auto Sunny Cloudy Tungsten, or Fluorescent  
.
,
,
,
.
Night Shot: Select On to enable infrared light sensing  
for low light conditions, or Off to use available light.  
Multimedia  
52  
After taking a picture, the following options appear in the  
display:  
Music Player  
.
Music Player lets you play MP3 and unprotected AAC, AAC+,  
WMA music files, loaded onto an optional microSD™ Memory  
Card using a personal computer. (For information on loading  
music files on a Memory Card, see “Loading Music Files” on  
Save: Press right soft key to save the image.  
Send:PresstheCenterSelectKey  
(
)tosendthe  
image in a picture message.  
Launching the Music Library Menu  
Delete: Press to delete the image.  
1. In standby mode, press Menu (  
)
Multimedia  
Music Player Library  
(
). The following options  
appear in the display:  
• NowPlaying: Music Player mode only : Indicates number of music  
files currently playing. Select this option (or press Back) to return to  
the Music Player screen.  
• All: Lists all music files on the Memory Card.  
• Artists: Lists artist names for music files on the Memory Card.  
• Albums: Lists album titles for music files on the Memory Card.  
• Genres: Lists music files by their music types.  
• Recently Added: Lists music files most recently added to your  
Memory Card.  
• Playlists: Lists any playlists you have saved and lets you create,  
save, and manage playlists.  
2. Select the desired option and press OPEN  
(
). A list of  
music files appears in the display.  
53  
 
Music Player Controls  
3. Highlight a music file, then:  
Press Play  
Press MARK  
Press Options  
(
)
to play the highlight music file.  
Volume Key:  
Press the Volume key Up to play a music file louder.  
(
)
to select the file for playing or other options.  
Press the Volume key Down to play a music file softer.  
(
)
to display the following options:  
Navigation Key  
:
Mark All: Marks all listed music files for playing, removal, or  
assignment of player settings.  
Press the Center Select Key  
to pause/resume playing a music file.  
Press the Navigation key Down to stop playing a music file.  
Press the Navigation key Left to skip to an earlier music file in the  
selected list.  
Erase: Deletes highlighted or marked music file(s) from the Memory  
Card.  
Add to Playlist: Lets you add a marked music file to an existing  
playlist.  
Press the Navigation key Right to skip to a later music file in the  
selected list.  
Press the Navigation key Up to return to the selected list and choose  
another music file to play..  
Song Info: Lists the Title, Artist, Album, Genre, File Name, Encoding  
Format, Bitrate, Duration, File Size, and Date of the highlighted music  
file.  
Playing Music  
Library soft key: Returns you to the Library screen.  
1. In standby mode, press Menu (  
)
Multimedia  
). A list of  
Music Player Library  
(
).  
2. Select the desired option and press OPEN  
(
music files appears in the display.  
3. Highlight a music file and press Play  
(
).  
Multimedia  
54  
Options soft key: Shows the following sub-menus and options:  
Loading Music Files  
Background Music: If a music file or playlist is playing, returns you to  
the Home screen (standby mode) while continuing to play the music file  
or playlist. Music continues playing while you use other phone  
functions. To end the music, return to the Home screen and press  
In addition to downloading music to your phone, you can also  
transfer (“sideload”) music from a personal computer to the  
Memory Card in your phone.  
1. Install a microSD™ or microSDHC™ Memory Card into  
End  
(
).  
your phone.  
Play Mode: Lets you change the play mode from Normal, Shuffle,  
Repeat One, or Repeat All.  
Add to Playlist: Moves you to the Playlists menu to let you add the  
selected music file to a playlist.  
Remove From List: Deletes the selected music file from the Memory  
Card  
Visual Supplements: Lets you change the Music Player visualization to  
Simple View, Equalizer, Album Art, or Lyrics.  
Memory Info: Displays the Memory Usage screen which lists Memory  
Card usage and availability amounts.  
2. Power your phone on.  
3. Connect the microUSB end of the USB Data Cable to the  
power-accessory connector on your phone.  
4. Check that the PC Connection setting is set to USB Mass  
Storage  
.
Song Info: Lists the Title, Artist, Album, Genre, File Name, Encoding  
Format, Bitrate, Duration, File Size, and Date of the highlighted music  
file.  
55  
 
5. Connect the USB end of the USB Data Cable to a matching  
connector on your personal computer. A new “Removable  
Disk” window should open on your computer screen.  
My Images  
My Images lets you manage your photos and pictures you  
download, and lets you choose the pictures that appear in your  
phone’s display while in standby mode (wallpaper), and as image  
IDs for your contacts.  
6. Select the Open folder to view files option. A new  
®
Windows Explorer window should open on your  
computer screen.  
1. In standby mode, press Menu (  
)
Multimedia  
7. Drag or download music (MP3) files into the “My_Music”  
My Images.  
folder.  
2. Highlight an image or photo.  
Press Camera  
(
)
to take new photos.  
Note: You can also insert the Memory Card into a compatible card reader.  
Card readers vary, so follow the installation instructions included with  
your card reader and personal computer.  
Press VIEW  
(
)
to expand the highlighted image to fill the  
screen.  
Press Options  
(
)
the following options appear in the display:  
Send: Send the currently highlighted or displayed image as part of a  
Picture message, Via a Bluetooth connection, To Facebook, or To  
MySpace.  
Set As: Assign the currently highlighted or displayed image as the Main  
Wallpaper or as the Picture ID for a Contact.  
Erase Files: Delete one or more marked images from the My Images  
folder.  
Move: Relocate the currently highlighted or displayed image from  
phone memory to a Memory Card or from a Memory Card to phone  
memory.  
Copy: Copy the currently highlighted or displayed image from phone  
memory to a Memory Card or from a Memory Card to phone memory.  
Multimedia  
56  
   
View by Location: Lets you view All images or only those images  
stored in Phone Memory or Card Memory.  
Assigning Ringtones  
1. In standby mode, press Menu (  
)
Multimedia  
Rename: Change the name of the picture file.  
My Ringtones. The following options appear in the  
display:  
Lock/Unlock: Prevent/allow erasure of the currently highlighted or  
displayed image.  
2. Highlight a file. You have the following options:  
Slide Show: View all of your images in sequence as a slide show.  
Press Set As  
(
)
to assign the highlighted as a Ringtone, a  
Picture Info: View the Name, Date and Time created, Resolution, and  
Size of the currently highlighted or displayed image.  
Contact ID, or an Alert Tone  
.
Press PLAY to playback the highlighted file.  
Press Options the following options appear in the display:  
Unlock : Prevent/allow erasure of the selected voice memo file.  
(
)
Get More Graphics: Dowload graphics from the web.  
(
)
My Ringtones  
My Ringtones lets you record voice memos and assign them or  
ringtones, melodies, or music files as ringtones for calls, alarms,  
and other alerts.  
Lock/  
Erase: To erase the selected voice memo file.  
Rename: Change the name of the voice memo file.  
Ringtone Info: Shows the title, size, type, and date for the file.  
Get More Tones: Download tones from the web.  
Recording Voice Memos  
In standby mode, press Menu (  
My Ringtones. The following options appear in the  
display:  
)
Multimedia  
Send via Bluetooth: Sends a copy of this file to another device over a  
Record New: Lets you record voice memos.  
Send Pic Msg: Send to someone as part of a Picture message.  
Press REC  
Press Pause  
Press SAVE  
(
) to start recording a voice memo.  
) to pause/resume recording.  
(
(
) to stop recording and save the voice memo.  
A list of recorded voice memos, ringtones, melodies, and music  
files.  
57  
 
Ringback Tones  
Ringback tones replace the standard ringing that callers hear as  
they wait for you to answer. Instead, callers can hear your  
favorite tune as they wait patiently for you to answer.  
In standby mode, press Menu (  
)
Multimedia  
Ringback Tones. Follow the prompts to download.  
Multimedia  
58  
 
Section 10: Browser  
This section outlines how to launch the browser and navigate to  
other pages within the browser, and how the keys on the  
QWERTY keypad are used with web application. Additionally,  
links to other sites are briefly discussed.  
Using the Browser  
When you use the browser, some of the keys operate differently  
than during a normal phone call. Browser presents on-screen  
items in any of the following ways:  
Launching the Browser  
Text or numeric input.  
In standby mode, press Menu (  
)
Browser  
.
Links (embedded in content).  
Numbered options (some may not be numbered).  
Simple text.  
Exit the Browser  
Press End  
(
).  
You can act upon options or links by using the soft keys.  
Browser soft keys  
At the bottom of the browser display is a bar that contains  
browser commands. The Left and Right soft keys (  
) on the  
keypad are used to execute the commands that appear in their  
respective corners of the display. These are called “soft keys”  
because their functions change depending on the application.  
Using Links  
Links have several purposes, such as jumping to a different  
page, to a different site, or even initiating a phone call. Links are  
shown inside of brackets ([ ]). You can normally use the Left soft  
key (  
) to select a link when it is highlighted.  
59  
               
How Browser Keys Work  
The following table lists browser keys and their functions.  
Right Soft Key: Press to activate the  
command that appears above it in the  
display.  
Navigation Key: Use to browse lists and  
options.  
Games & Apps  
With Games and Apps, you can download full featured  
applications over the air including games, personalized ring  
tones, pictures, and more.  
Back Key: Press once to back up one  
page. Press and hold to go back to home  
page. Press once to clear the last number,  
letter, or symbol entered. Press and hold to  
completely clear the entry.  
In standby mode, press Menu (  
)
Games & Apps  
.
SHIFT Key: Press before entering text to  
enable uppercase characters.  
Spacebar: Press to insert a space when  
entering text.  
Number 1 thru 0: Use the number keys to  
select items in a menu if they are  
numbered.  
End Key: Press to exit the browser and  
return the phone to standby mode.  
Left Soft Key: Press to activate the  
command that appears above it in the  
display.  
Browser  
60  
       
Navigator  
Cricket Navigator is a downloadable application that turns your  
handset into a powerful GPS navigation tool with audible turn-by-  
turn driving directions, local search and maps—just like an  
advanced GPS navigation system but at a fraction of the cost.  
And it’s all in your phone!  
Cricket Navigator gives you audible, turn-by-turn directions to  
any destination, along with detours if traffic’s heavy, and re-  
routing if you miss a turn. You can perform a local search by  
business category, address, intersection or airport code and then  
call found locations with a press of the send key! Cricket  
Navigator points out landmarks along your route, like  
restaurants, gas stations (with prices) and more. Color 3D maps  
with pan and zoom options show you where you are, at any given  
moment.  
In standby mode, press Menu (  
)
Navigator  
.
61  
   
Section 11: Tools  
This section explains how you can use your phone's productivity  
tools to view today’s calendar, schedule appointments, set an  
alarm, perform simple math calculations, and more.  
Add New Device  
1. In standby mode, press Menu (  
)
Tools  
Bluetooth. Registered List Add New Device  
.
Accessing Tools  
Note: If prompted with “Turn bluetooth on?”, press Yes  
.
In standby mode, press Menu (  
Cricket 411  
In standby mode, press Menu (  
Cricket 411  
Bluetooth  
)
)
Tools  
Tools  
.
2. Place the new Bluetooth device in discovery mode.  
3. On your phone, press OK ). Your phone will search for  
(
discoverable devices and display them.  
.
4. Tap the device you want to pair with your phone, the phone  
will attempt to automatically pair with the selected device.  
Bluetooth is a short-range wireless communications technology  
capable of exchanging information over a distance of about 30  
feet without requiring a physical connection.  
If automatic pairing fails, you are prompted to enter the  
passkey or PIN for the selected device. (For other wireless  
handsets, choose a passkey or PIN and enter the same one  
on both devices. For more information on headsets and  
handsfree units, refer to the user manual for the other  
device.)  
In standby mode, press Menu (  
Bluetooth  
Turn Bluetooth On/Off  
)
Tools  
.
In standby mode, press Menu (  
Bluetooth Bluetooth Settings Enable or Disable  
)
Tools  
5. Except for other wireless handsets, you are prompted to  
confirm whether you want to connect your phone with the  
other device. To connect with the other device, press Yes  
.
(
).  
Tools  
62  
                 
Registered List  
Voice SVC  
The Registered List contains paired Bluetooth devices, and  
allows you to connect/disconnect from a device or modify  
settings for paired devices.  
Your device includes Nuance Vsuite, state-of-the-art voice  
recognition software that lets you use your voice to dial numbers,  
access your Contacts list, and open Tools. The following options  
are available:  
Bluetooth Settings  
In standby mode, press Menu (  
Voice SVC  
)
Tools  
Bluetooth Settings allow you to set your phone’s Bluetooth  
availability, and view and set information about your phone’s  
Bluetooth capabilities.  
.
• Voice Commands: Lets you place calls, access your Contacts List,  
review your appointments, and more by speaking commands into  
your phone.  
In standby mode, press Menu (  
Bluetooth Bluetooth Settings.  
• Enable Disable: Turns Bluetooth power On / Off.  
)
Tools  
• Voice Settings: Lets you tailor Vsuite to better respond to your  
voice and your phone use preferences.  
/
• Discovery Mode: Makes your phone “visible” to other Bluetooth  
devices for pairing and connecting.  
• Device Name: Lets you review and/or change the Bluetooth name  
of your device.  
• Supported Profiles: Lists and describes the Bluetooth profiles your  
phone supports (Headset, Handsfree, A2DP (stereo audio),  
Phonebook Access, Object Push, Dial Up Networking and File  
Transfer).  
• Device Info: Lists the Bluetooth Type, Status, and Address of your  
phone.  
63  
       
Calendar  
World Time  
Calendar allows you to view the current, past, or future month in  
calendar format, and schedule events. While viewing the  
calendar, the current date is highlighted, and days with  
scheduled events are surrounded by a box.  
World Clock lets you view the time of day or night in any two of  
the 24 different time zones around the world you choose. You  
select your time zones by city and/or country name.  
Note: World Clock requires your Wireless Provider’s digital service.  
In standby mode, press Menu (  
)
Tools  
Calendar.  
Memo Pad  
In standby mode, press Menu (  
World Time  
Calculator  
)
Tools  
.
Create notes and store them in Memo Pad. Return to Memo Pad  
anytime to review and edit your notes.  
In standby mode, press Menu (  
Memo Pad  
Alarm Clock  
)
Tools  
You can perform calculations, including addition, subtraction,  
multiplication, and division using your phone.  
.
In standby mode, press Menu (  
Calculator  
Stop Watch  
)
Tools  
.
Set up to 10 alarm clocks for various times, days of the week, or  
ringers. You can turn these alarm clocks On and Off without  
affecting their settings.  
Stop Watch provides a timer that you can use to record event  
times and/or to record lap times.  
In standby mode, press Menu (  
Alarm Clock  
)
Tools  
.
In standby mode, press Menu (  
Stop Watch  
)
Tools  
.
Tools  
64  
                     
Converter  
The Converter converts values for currency, length, weight,  
volume, area, or temperature. In the currency converter, you can  
edit or add currency exchange rates.  
In standby mode, press Menu (  
Converter  
Tip Calculator  
)
Tools  
.
Tip Calculator allows you to calculate a percentage amount for a  
tip, and the total due for multiple payers.  
In standby mode, press Menu (  
Calculator  
)
Tools  
Tip  
.
65  
       
Section 12: Settings  
This section explains how to configure your phone’s language,  
network preferences, security options, and other settings.  
Display Settings  
Display settings let you change your phone’s menu appearance,  
display brightness and contrast, and display content to better  
meet your needs.  
Accessing Your Phone’s Settings  
In standby mode, press Menu (  
)
Settings  
.
In standby mode, press Menu (  
Display Settings  
Wallpaper  
)
Settings  
Location  
.
Choose whether your phone’s GPS (Global Positioning System)  
location is available to the network at all times, or only when  
you’ve dialed an Emergency Number, such as 911  
Wallpaper lets you choose an image to appear in the background  
on your phone’s Main display while in standby mode.  
In standby mode, press Menu (  
)
Settings  
Location. Select Location On or 911 Only  
.
In standby mode, press Menu (  
Display Settings Wallpaper Select from dowloaded  
images in My Images or preloaded images in Preset  
Images  
)
Settings  
.
Note: Check with your Wireless Carrier to determine if/when/where location-  
based services are available.  
.
Settings  
66  
                 
Backlight  
Ringer Type  
You can set the brightness of the backlight for your display or  
keypad.  
Use the Ringer Type sub-menu to select ringtones, melodies, or  
recorded sounds to play as ringers for Voice Call or Messages  
alerts.  
In standby mode, press Menu (  
Display Settings Backlight  
You can set the Main Display  
backlight to remain on for 10, 15 or 30 seconds; to be  
)
Settings  
.
In standby mode, press Menu (  
Sound Settings Ringer Type  
)
Settings  
.
,
Keypad and Charging  
Alerts  
Always On; or to be Always Off. Set the Brightness of the  
display by pressing the navigation keys up or down.  
You can set your phone to sound an alert for each elapsed minute  
during a call, whenever you enter or leave your service area, or  
whenever you connect or disconnect a call, power your phone on  
or off, and/or when Enhanced Voice Privacy becomes available or  
unavailable.  
Note: Prolonged backlight use drains your battery faster.  
Sound Settings  
Sound Settings let you customize your phone’s audio properties,  
In standby mode, press Menu (  
Sound Settings Alerts  
Key Tone  
)
Settings  
.
such as ringers, keypad tones, alerts, start up melody, and more.  
In standby mode, press Menu (  
Sound Settings  
Master Volume  
)
Settings  
.
Lets you adjust the volume level and duration of the tones that  
the keypad generates when you press the keys.  
In standby mode, press Menu (  
Sound Settings Key Tones  
)
Settings  
Set the Master Volume for all the sounds on your phone.  
In standby mode, press Menu ( Settings  
Sound Settings Master Volume  
.
)
.
67  
           
Auto Answer  
Call Settings  
The Call Settings sub-menu lets you set call options such as Auto  
Retry, Data rates for data calls, and more.  
Auto Answer lets you set your phone to automatically answer  
calls after 1, 3, or 5 seconds.  
In standby mode, press Menu (  
Call Settings  
Call Answer  
)
Settings  
In standby mode, press Menu (  
Call Settings Auto Answer  
Auto Retry  
)
Settings  
.
.
You can set your phone to answer incoming calls only when  
you press Send ) or when you press any key on the keypad  
except End ), Volume Key ), or Camera Key  
In standby mode, press Menu ( Settings  
Call Settings Call Answer  
Call Alert  
Auto Retry automatically re-dials a number at an interval you  
select, when there is no answer or the dialed party is busy.  
Depending upon your location, the number of times your phone  
re-dials a number may vary.  
(
(
(
(
).  
)
In standby mode, press Menu (  
Call Settings Auto Retry  
)
Settings  
.
.
Call Alert lets you set your phone plays to notify you of incoming  
calls by playing the voice calls ringer only, by reading any Caller  
ID information and playing the ringer, or by reading the Caller ID  
or Contact name only.  
In standby mode, press Menu (  
Call Settings Call Alert  
)
Settings  
.
Settings  
68  
       
TTY Mode  
Phone Settings  
Your phone is fully TTY-compatible, allowing you to connect a TTY  
device to the phone’s headset jack. Before you can use your  
phone with a TTY device, you’ll need to enable TTY Mode.  
You can set or reset the operating characteristics of your phone  
to suit your location and/or to limit access to your phone.  
In standby mode, press Menu (  
Phone Settings  
Airplane Mode  
)
Settings  
In standby mode, press Menu (  
Call Settings TTY Mode read the prompt and select Yes  
). Select TTY Full TTY + Talk (VCO) TTY + Hear (HCO)  
or TTY Off  
)
Settings  
.
(
,
,
When set to On, Airplane Mode disables all radio functions of  
.
your phone. This blocks you from making or receiving calls other  
than Emergency (911) calls, but allows you to use other features  
(such as the camera and the Tools) safely in sensitive  
environments, such as on board an aircraft.  
Note: TTY Mode must be enabled before you can use your phone with TTY/  
TDD equipment.  
The TTY Mode option has no effect on the phone’s earpiece,  
microphone, or speaker. When you select TTY Full, all currently  
enabled sound functions remain enabled.  
In standby mode, press Menu (  
Phone Settings Airplane Mode  
)
Settings  
.
Tip: If you need to make an emergency call with Airplane mode enabled, just  
dial the emergency number and press  
.
Language  
Choose the Language for the phone’s operation and displays.  
In standby mode, press Menu ( Settings  
Phone Settings Language. Select English or Español  
)
.
69  
       
Change Lock  
Security  
Use the Security sub-menu to lock your phone, set up emergency  
numbers, enable or disable voice privacy, set restrictions, and  
other security options.  
The Change Lock option lets you replace your phone’s default  
lock code (the last four digits of your phone number) with one of  
your own choosing.  
To access the Security sub-menu, you are prompted to enter your  
phone’s four-digit lock code.  
It is advisable to change the default lock code to a secret code for  
security purposes.  
In standby mode, press Menu (  
Phone Settings Security  
)
Settings  
When you select Change Lock, your are prompted to enter the  
current lock code followed by entering your new lock code, and  
then re-entering it, for verification.  
.
Note: The default lock code is the last four digits of your mobile phone  
number.  
Note: Your phone does not allow you to view the lock code for obvious  
security reasons. If you change the lock code, be sure to write down or  
memorize the new code.  
Lock Phone  
The Lock Phone option lets you Lock or Unlock your phone  
immediately or set your phone to lock itself On Power Up.  
Emergency #  
The Emergency # option lets you enter and store up to three  
emergency numbers in your phone. Each number can be up to 32  
digits long. You can dial your emergency numbers any time, even  
when your phone is locked or restricted.  
Locking the device blocks all outgoing calls except those to 911  
and to any other user-programmed emergency numbers. You can  
lock the phone manually, or set the phone to lock automatically  
when turned on. In Lock mode, you can answer calls, but you  
must unlock the phone to place calls (except to emergency  
Note: Emergency number 911 is hard-coded into your phone. You can dial  
this number any time, even when the phone is locked or restricted. If  
you call 911 you will hear audible tone and an Emergency prompt will  
appear in the display for the duration of the call.  
Settings  
70  
           
Important!: Because of various transmission methods, network parameters,  
and user settings used to complete a call from your wireless  
phone, a connection cannot always be guaranteed. Therefore,  
emergency calling may not be available on all wireless networks  
at all times.  
Caution!: Before selecting Reset Phone, contact your Wireless Carrier.  
Invoking Reset Phone may erase settings made by your Wireless  
Carrier from your phone, resulting in loss of service.  
Erase All Entries  
The Erase All Entries option deletes all entries from the Contacts  
list.  
Important!: DO NOT depend on this phone as a primary method of calling  
911 or for essential or emergency calls.  
Restrictions  
Remember to always turn your phone on and check for adequate  
signal strength before placing an emergency call.  
The Restrictions option settings let you Allow All Calls/Allow calls  
only to/from your Contacts/Allow No Calls (Incoming and  
Outgoing), Allow All/None SMS (Text) Messages, Allow All/None  
MMS (Picture) Messages, and/or Allow All/Allow None Data calls.  
Note: When you dial an emergency number, you phone locks itself to the  
emergency location that answered the call and locks itself in 911-Only  
mode, blocking from dialing any number but an emergency number.  
Note: All default restriction settings are Allow All (unrestricted).  
To store emergency numbers: Select the Emergency # option, then  
select one of the three emergency number options, and enter and save  
your new emergency number.  
To call emergency numbers (even in lock mode): Simply enter 911 or  
one of your emergency numbers and press  
to place the call.  
Reset Phone  
The Reset Phone option returns all settings on your phone (except  
for Contacts entries) to their factory default values.  
71  
           
System Select  
Set Time  
System Select allows you to set system selections for roaming.  
Use the Set Time options to set the current time and date  
displayed on your phone and used by your phone’s Tools.  
In standby mode, press Menu (  
)
Settings  
Phone Settings System Select. Select one of the following:  
In standby mode, press Menu (  
Phone Settings Set Time  
)
Settings  
.
• Home Only: Your phone is only active in your home network’s  
coverage area. When outside the coverage area, your phone will  
not roam, and call functions and other features will not be available.  
Note: In digital service mode, the Set Time feature is disabled. The network  
adjusts time and date automatically.  
• Automatic: Your phone automatically acquires service based on  
default settings, using the Cricket network and the networks of  
roaming partners.  
With Airplane Mode set to On, the Set Time feature is enabled.  
Select Set Time to enter the current time using your keypad:  
The hour and minute must be entered using two digits each. You must  
enter the hour in 12-hour format.  
Use the Left and Right navigation keys to select am or pm  
.
Select Set Date to enter the current date using your keypad:  
The month and day must be entered using two digits each.  
The year must be entered with all four digits.  
Settings  
72  
 
Quick Search  
Auto Key Lock  
Quick Search allows easy searching for contacts and menus in  
standby mode, by pressing keys on the QWERTY keyboard  
The Auto Key Lock setting controls whether the external keypad  
locks automatically when the backlight goes out.  
In standby mode, press Menu (  
Phone Settings Quick Search. Select On or Off  
In standby mode, just enter the first few letters of a  
)
Settings  
In standby mode, press Menu (  
Phone Settings Auto Key Lock. Select On or Off  
With Auto Key Lock set to On, your phone automatically  
)
Settings  
.
.
Contact name, then press the Navigation key Up to find a  
matching Contact.  
disables its keys when the screen backlight goes out with  
the phone closed.  
Press a key to turn the screen backlight on, then press  
PC Connection  
Unlock  
(
)
Spacebar/Vibration Key  
(
).  
The PC Connection option lets you enable (USB Mass Storage  
setting) or disable (No Connection setting) the Freeform II’s ability  
to act as a USB flash drive, provided you have installed an  
optional microSD or microSDHC Memory Card and an optional  
USB Data Cable.  
In standby mode, press Menu (  
Phone Settings PC Connection  
)
Settings  
.
With PC Connection set to USB Mass Storage, you can  
transfer music, sound, ringtone, and image files to and  
from a microSD or microSDHC Memory Card.  
73  
 
Memory Info  
In standby mode, press Menu (  
Memory Info  
Memory Info allows you to:  
Phone Info  
Phone Info allow you to view information about your device.  
)
Settings  
.
In standby mode, press Menu (  
Phone Settings Phone Info  
)
Settings  
.
Save Options: Allow you to select a default storage location for  
images taken with your phone’s Camera.  
Phone Memory: Allows you to review the amount of available and  
used phone memory.  
Card Memory: Allows you to review the amount of available and used  
card memory (if installed).  
Format an optional microSD or microSDHC memory card.  
Note: This option prepares used microSD™ or microSDHC™Memory Cards  
for use with your phone. Repeated formatting of a Memory Card can  
shorten its service life. Erase files rather that format the Memory Card.  
Settings  
74  
     
Section 13: Health and Safety Information  
This section outlines the safety precautions associated with using  
your phone. The terms “mobile device” or “cell phone” are used  
in this section to refer to your phone. Read this information before  
The majority of studies published have failed to show an  
association between exposure to radio frequency from a cell  
phone and health problems.  
using your mobile device  
.
The low levels of RF cell phones emit while in use are in the  
microwave frequency range. They also emit RF at substantially  
reduced time intervals when in the stand-by mode. Whereas high  
levels of RF can produce health effects (by heating tissue),  
exposure to low level RF that does not produce heating effects  
causes no known adverse health effects.  
Exposure to Radio Frequency (RF) Signals  
The U.S. Food and Drug Administration (FDA) has published  
information for consumers relating to Radio Frequency (RF)  
exposure from wireless phones. The FDA publication includes the  
following information:  
The biological effects of radio frequency energy should not be  
confused with the effects from other types of electromagnetic  
energy.  
Do cell phones pose a health hazard?  
Many people are concerned that cell phone radiation will cause  
cancer or other serious health hazards. The weight of scientific  
evidence has not linked cell phones with any health problems.  
Very high levels of electromagnetic energy, such as is found in  
X-rays and gamma rays, can ionize biological tissues. Ionization  
is a process where electrons are stripped away from their normal  
locations in atoms and molecules. It can permanently damage  
biological tissues including DNA, the genetic material.  
Cell phones emit low levels of Radio Frequency (RF) energy. Over  
the past 15 years, scientists have conducted hundreds of studies  
looking at the biological effects of the radio frequency energy  
emitted by cell phones. While some researchers have reported  
biological changes associated with RF energy, these studies have  
failed to be replicated.  
The energy levels associated with radio frequency energy,  
including both radio waves and microwaves, are not great  
enough to cause ionization of atoms and molecules. Therefore,  
RF energy is a type of non-ionizing radiation.  
75  
         
Other types of non-ionizing radiation include visible light, infrared  
radiation (heat), and other forms of electromagnetic radiation  
with relatively low frequencies.  
(June, 2010) compared cell phone usage for more than 5,000  
people with brain tumors (glioma and meningioma) and a similar  
number of healthy controls.  
While RF energy does not ionize particles, large amounts can  
increase body temperatures and cause tissue damage. Two  
areas of the body, the eyes and the testes, are particularly  
vulnerable to RF heating because there is relatively little blood  
flow in them to carry away excess heat.  
Results of this study did NOT show that cell phones caused brain  
cancer. In this study, most people had no increased risk of brain  
cancer from using cell phones. For people with the heaviest use  
of cell phones (an average of more than ½ hour per day, every  
day, for over 10 years) the study suggested a slight increase in  
brain cancer. However, the authors determined that biases and  
errors prevented any conclusions being drawn from this data.  
Additional information about Interphone can be found at  
Research Results to Date: Is there a connection between RF  
and certain health problems?  
The results of most studies conducted to date say no. In addition,  
attempts to replicate and confirm the few studies that have  
shown a connection have failed.  
Interphone is the largest cell phone study to date, but it did not  
answer all questions about cell phone safety. Additional research  
is being conducted around the world, and the FDA continues to  
monitor developments in this field.  
The scientific community at large therefore believes that the  
weight of scientific evidence does not show an association  
between exposure to Radio Frequency (RF) from cell phones and  
adverse health outcomes. Still the scientific community has  
supported additional research to address gaps in knowledge.  
Some of these studies are described below.  
International Cohort Study on Mobile Phone Users (COSMOS)  
The COSMOS study aims to conduct long-term health monitoring  
of a large group of people to determine if there are any health  
issues linked to long-term exposure to radio frequency energy  
from cell phone use. The COSMOS study will follow  
approximately 300,000 adult cell phone users in Europe for 20 to  
30 years. Additional information about the COSMOS study can be  
Interphone Study  
Interphone is a large international study designed to determine  
whether cell phones increase the risk of head and neck cancer. A  
report published in the International Journal of Epidemiology  
.
Health and Safety Information  
76  
RiskofBrainCancerfromExposuretoRadioFrequencyFields  
in Childhood and Adolescence (MOBI-KIDS)  
Cell Phone Industry Actions  
Although the existing scientific data do not justify FDA regulatory  
actions, the FDA has urged the cell phone industry to take a  
number of steps, including the following:  
MOBI-KIDS is an international study investigating the relationship  
between exposure to radio frequency energy from  
communication technologies including cell phones and brain  
cancer in young people. This is an international multi-center  
study involving 14 European and non-European countries.  
Additional information about MOBI-KIDS can be found at  
Support-needed research on possible biological effects of RF for  
the type of signal emitted by cell phones;  
Design cell phones in a way that minimizes any RF exposure to the  
user; and  
Cooperate in providing users of cell phones with the current  
information on cell phone use and human health concerns.  
.
Surveillance, Epidemiology, and End Results (SEER) Program  
of the National Cancer Institute  
The FDA also is working with voluntary standard-setting bodies  
such as the Institute of Electrical and Electronics Engineers  
(IEEE), the International Commission on Non-Ionizing Radiation  
Protection (ICNIRP), and others to assure that safety standards  
continue to adequately protect the public.  
The National Cancer Institute (NCI) actively follows cancer  
statistics in the United States to detect any change in rates of  
new cases for brain cancer. If cell phones play a role in risk for  
brain cancer, rates should go up, because heavy cell phone use  
has been common for quite some time in the U.S. Between 1987  
and 2005, the overall age-adjusted incidence of brain cancer did  
not increase. Additional information about SEER can be found at  
.
77  
Reducing Exposure: Hands-Free Kits and Other  
Accessories  
Steps to Reduce Exposure to Radio Frequency Energy  
Because there are no known risks from exposure to RF emissions  
from cell phones, there is no reason to believe that hands-free  
kits reduce risks. Hands-free kits can be used for convenience  
and comfort. They are also required by law in many states if you  
want to use your phone while driving.  
If there is a risk from being exposed to radio frequency energy  
(RF) from cell phones - and at this point we do not know that  
there is - it is probably very small. But, if you are concerned  
about avoiding even potential risks, you can take a few simple  
steps to minimize your RF exposure.  
Cell Phone Accessories that Claim to Shield the Head from RF  
Radiation  
Because there are no known risks from exposure to RF emissions  
from cell phones, there is no reason to believe that accessories  
which claim to shield the head from those emissions reduce  
risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing  
more than a metallic accessory attached to the phone. Studies  
have shown that these products generally do not work as  
advertised. Unlike “hands-free” kits, these so-called “shields”  
may interfere with proper operation of the phone. The phone may  
be forced to boost its power to compensate, leading to an  
increase in RF absorption.  
Reduce the amount of time spent using your cell phone;  
Use speaker mode or a headset to place more distance between your  
head and the cell phone.  
Hands-Free Kits  
Hands-free kits may include audio or Bluetooth® headsets and  
various types of body-worn accessories such as belt-clips and  
holsters. Combinations of these can be used to reduce RF energy  
absorption from cell phones.  
Headsets can substantially reduce exposure because the phone  
is held away from the head in the user's hand or in approved  
body-worn accessories. Cell phones marketed in the U.S. are  
required to meet RF exposure compliance requirements when  
used against the head and against the body.  
Health and Safety Information  
78  
 
Children and Cell Phones  
Additional information on the safety of RF exposures from various  
sources can be obtained from the following organizations  
(updated 10/1/2010):  
The scientific evidence does not show a danger to any users of  
cell phones from RF exposure, including children and teenagers.  
The steps adults can take to reduce RF exposure apply to  
children and teenagers as well.  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Reduce the amount of time spent on the cell phone;  
Use speaker mode or a headset to place more distance between the  
head and the cell phone.  
Occupational Safety and Health Administration (OSHA):  
(Note: This web address is case sensitive.)  
Some groups sponsored by other national governments have  
advised that children be discouraged from using cell phones at  
all. For example, The Stewart Report from the United Kingdom  
made such a recommendation in December 2000. In this report,  
a group of independent experts noted that no evidence exists that  
using a cell phone causes brain tumors or other ill effects. Their  
recommendation to limit cell phone use by children was strictly  
precautionary; it was not based on scientific evidence that any  
health hazard exists.  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
Health Protection Agency:  
US Food and Drug Administration:  
http://www.fda.gov/Radiation-EmittingProducts/  
RadiationEmittingProductsandProcedures/  
79  
 
SAR tests are conducted using standard operating positions  
accepted by the FCC with the phone transmitting at its highest  
certified power level in all tested frequency bands. Although the  
SAR is determined at the highest certified power level, the actual  
SAR level of the phone while operating can be well below the  
maximum value. This is because the phone is designed to  
operate at multiple power levels so as to use only the power  
required to reach the network. In general, the closer you are to a  
wireless base station antenna, the lower the power output.  
Specific Absorption Rate (SAR) Certification  
Information  
Your wireless phone is a radio transmitter and receiver. It is  
designed and manufactured not to exceed the exposure limits for  
Radio Frequency (RF) energy set by the Federal Communications  
Commission (FCC) of the U.S. Government.  
These FCC exposure limits are derived from the  
recommendations of two expert organizations: the National  
Council on Radiation Protection and Measurement (NCRP) and  
the Institute of Electrical and Electronics Engineers (IEEE).  
Before a new model phone is available for sale to the public, it  
must be tested and certified to the FCC that it does not exceed  
the exposure limit established by the FCC. Tests for each model  
phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC.  
In both cases, the recommendations were developed by scientific  
and engineering experts drawn from industry, government, and  
academia after extensive reviews of the scientific literature  
related to the biological effects of RF energy.  
For body-worn operation, this phone has been tested and meets  
FCC RF exposure guidelines when used with an accessory that  
contains no metal and that positions the mobile device a  
minimum of 1.5 cm from the body.  
The exposure limit set by the FCC for wireless mobile phones  
employs a unit of measurement known as the Specific  
Absorption Rate (SAR). The SAR is a measure of the rate of  
absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to  
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).  
Use of other accessories may not ensure compliance with FCC RF  
exposure guidelines.  
The FCC exposure limit incorporates a substantial margin of  
safety to give additional protection to the public and to account  
for any variations in measurements.  
Health and Safety Information  
80  
   
The FCC has granted an Equipment Authorization for this mobile  
phone with all reported SAR levels evaluated as in compliance  
with the FCC RF exposure guidelines. The maximum SAR values  
for this model phone as reported to the FCC are:  
Sometimes it may be necessary to remove the battery pack to  
find the number. Once you have the FCC ID number for a  
particular phone, follow the instructions on the website and it  
should provide values for typical or maximum SAR for a particular  
phone. Additional product specific SAR information can also be  
800 MHz (Cellular) CDMA  
.
Head: 0.66 W/kg  
Smart Practices While Driving  
Body-worn: 0.64 W/kg  
On the Road - Off the Phone  
1700 MHz (AWS) CDMA  
The primary responsibility of every driver is the safe operation of  
his or her vehicle.  
Head: 0.79 W/kg  
Body-worn: 0.40 W/kg  
Responsible drivers understand that no secondary task should be  
performed while driving whether it be eating, drinking, talking to  
passengers, or talking on a mobile phone - unless the driver has  
assessed the driving conditions and is confident that the  
secondary task will not interfere with their primary responsibility.  
Do not engage in any activity while driving a moving vehicle which  
may cause you to take your eyes off the road or become so  
absorbed in the activity that your ability to concentrate on the act  
of driving becomes impaired. Samsung is committed to promoting  
responsible driving and giving drivers the tools they need to  
understand and address distractions.  
1900 MHz (PCS) CDMA  
Head: 0.94 W/kg  
Body-worn: 0.32 W/kg  
SAR information on this and other model phones can be viewed  
online at http://www.fcc.gov/oet/ea. To find information that  
pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case  
of the phone.  
81  
   
Check the laws and regulations on the use of mobile devices and  
their accessories in the areas where you drive. Always obey them.  
The use of these devices may be prohibited or restricted in certain  
areas. For example, only hands-free use may be permitted in  
certain areas.  
Laws in some states may prohibit mounting this device on or  
near the windshield of an automobile. In other states, the law  
may permit mounting this device only in specific locations in the  
automobile. Be sure to consult the state and local laws or  
ordinances where you drive before mounting this device in an  
automobile. Failure to comply with these restrictions could result  
in fines, penalties, or other damages.  
Before answering calls, consider your circumstances. Let the call  
go to voicemail when driving conditions require. Remember,  
driving comes first, not the call!  
Never mount this device in a manner that will obstruct the  
driver's clear view of the street and traffic.  
If you consider a call necessary and appropriate, follow these  
tips:  
Never use wireless data services such as text messaging, Web  
browsing, or e-mail while operating a vehicle.  
Use a hands-free device;  
Secure your phone within easy reach;  
Place calls when you are not moving;  
Plan calls when your car will be stationary;  
Do not engage in stressful or emotional conversations;  
Never watch videos, such as a movie or clip, or play video games  
while operating a vehicle.  
For more information, go to http://www.ctia.org  
.
Let the person with whom you are speaking know that you are driving  
and will suspend the call if necessary;  
Do not take notes or look up phone numbers while driving;  
Notice regarding legal restrictions on mounting this device in an  
automobile:  
Health and Safety Information  
82  
Do not handle a damaged or leaking battery. Do not let leaking  
battery fluid come in contact with your eyes, skin or clothing. For safe  
disposal options, contact your nearest Samsung-authorized service  
center.  
Battery Use and Safety  
Important!: Handle and store batteries properly to avoid injury or damage  
.
Most battery issues arise from improper handling of batteries  
and, particularly, from the continued use of damaged batteries.  
Avoid dropping the cell phone. Dropping the phone or the battery,  
especially on a hard surface, can potentially cause damage to the  
phone and battery. If you suspect damage to the phone or battery, take  
it to a service center for inspection.  
Do not disassemble, crush, puncture, shred, or otherwise attempt  
to change the form of your battery. Do not put a high degree of  
pressure on the battery. This can cause leakage or an internal short-  
circuit, resulting in overheating.  
Never use any charger or battery that is damaged in any way.  
Do not let the phone or battery come in contact with liquids.  
Liquids can get into the phone's circuits, leading to corrosion. Even  
when the phone appears to be dry and appears to operate normally,  
the circuitry could slowly corrode and pose a safety hazard. If the  
phone and/or battery get wet, have them checked by your service  
provider or contact Samsung, even if they appear to be working  
properly.  
Do not allow the battery to touch metal objects. Accidental  
short-circuiting can occur when a metallic object (coin, key, jewelry,  
clip, or pen) causes a direct connection between the + and - terminals  
of the battery (metal strips on the battery), for example when you carry  
a spare battery in a pocket or bag. Short-circuiting the terminals may  
damage the battery or the object causing the short-circuiting.  
Important!: Use only Samsung-approved batteries, and recharge your battery  
only with Samsung-approved chargers which are specifically  
designed for your phone.  
Do not place your battery in or near a heat source. Excessive  
heating can damage the phone or the battery and could cause the  
phone or the battery to explode. Do not dry a wet or damp battery with  
an appliance or heat source such as a microwave oven, hair dryer,  
iron, or radiator. Avoid leaving your phone in your car in high  
temperatures.  
Warning!: Use of a non-Samsung-approved battery or charger may present a  
risk of fire, explosion, leakage, or other hazard. Samsung's  
warranty does not cover damage to the phone caused by non-  
Samsung-approved batteries and/or chargers.  
Do not dispose of the phone or the battery in a fire. The phone or  
the battery may explode when overheated.  
83  
   
Do not use incompatible cell phone batteries and chargers. Some  
websites and second-hand dealers not associated with reputable  
manufacturers and carriers, might be selling incompatible or even  
counterfeit batteries and chargers. Consumers should purchase  
manufacturer or carrier-recommended products and accessories. If  
unsure about whether a replacement battery or charger is compatible,  
contact the manufacturer of the battery or charger.  
Drop It Off  
You can drop off your Samsung-branded mobile device and  
batteries for recycling at one of our numerous Samsung  
Recycling Direct (SM) locations. A list of these locations may be  
.
Samsung-branded devices and batteries will be accepted at  
these locations for no fee.  
Misuse or use of incompatible phones, batteries, and charging  
devices could result in damage to the equipment and a possible  
risk of fire, explosion, or leakage, leading to serious injuries,  
Consumers may also recycle their used mobile device or  
batteries at many retail or carrier-provided locations where  
mobile devices and batteries are sold. Additional information  
regarding specific locations may be found at:  
damages to your phone, or other serious hazard  
.
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its  
customers to recycle Samsung mobile devices and genuine  
Samsung accessories.  
.
Mail It In  
Proper disposal of your mobile device and its battery is not only  
important for safety, it benefits the environment. Batteries must  
be recycled or disposed of properly.  
The Samsung Mobile Take-Back Program will provide Samsung  
customers with a free recycling mailing label. Just go to  
yle_your_phone_page and follow the instructions to print out a  
free pre-paid postage label and then send your old mobile  
device or battery to the address listed, via U.S. Mail, for  
recycling.  
Recycling programs for your mobile device, batteries, and  
accessories may not be available in your area.  
We've made it easy for you to recycle your old Samsung mobile  
device by working with respected take-back companies in every  
state in the country.  
Health and Safety Information  
84  
   
Dispose of unwanted electronics through an approved recycler.  
To find the nearest recycling location, go to our website:  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC  
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH  
AMERICA, USE AN ATTACHMENT PLUG ADAPTOR OF  
THE PROPER CONFIGURATION FOR THE POWER  
OUTLET.  
Or call, (877) 278-0799.  
Follow local regulations regarding disposal of mobile devices  
and batteries  
THIS POWER UNIT IS INTENDED TO BE CORRECTLY  
ORIENTED IN A VERTICAL OR HORIZONTAL OR FLOOR  
MOUNT POSITION.  
Dispose of your mobile device and batteries in accordance with  
local regulations. In some areas, the disposal of these items in  
household or business trash may be prohibited. Help us protect  
the environment - recycle!  
Display / Touch-Screen  
Please note the following information when using your mobile  
device:  
Warning!: Never dispose of batteries in a fire because they may explode.  
WARNING REGARDING DISPLAY  
UL Certified Travel Charger  
The display on your mobile device is made of glass or  
acrylic and could break if your mobile device is dropped or  
if it receives significant impact. Do not use if screen is  
broken or cracked as this could cause injury to you.  
The Travel Charger for this phone has met applicable UL safety  
requirements. Please adhere to the following safety instructions  
per UL guidelines:  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY  
LEAD TO SERIOUS PERSONAL INJURY AND POSSIBLE  
PROPERTY DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE  
INSTRUCTIONS.  
85  
       
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN  
MOBILE DEVICE  
Certain Samsung mobile devices can also use an Assisted Global  
Positioning System (AGPS), which obtains information from the  
cellular network to improve GPS performance. AGPS uses your  
wireless service provider's network and therefore airtime, data  
charges, and/or additional charges may apply in accordance with  
your service plan. Contact your wireless service provider for  
details.  
If your mobile device has a touch-screen display, please  
note that a touch-screen responds best to a light touch  
from the pad of your finger or a non-metallic stylus. Using  
excessive force or a metallic object when pressing on the  
touch-screen may damage the tempered glass surface  
and void the warranty. For more information, please refer  
to the “Standard Limited Warranty” on page page 44.  
Your Location  
Location-based information includes information that can be  
used to determine the approximate location of a mobile device.  
Mobile devices which are connected to a wireless network  
transmit location-based information. Additionally, if you use  
applications that require location-based information (e.g. driving  
directions), such applications transmit location-based  
information. The location-based information may be shared with  
third-parties, including your wireless service provider,  
applications providers, Samsung, and other third-parties  
providing services.  
GPS & AGPS  
Certain Samsung mobile devices can use a Global Positioning  
System (GPS) signal for location-based applications. A GPS uses  
satellites controlled by the U.S. Government that are subject to  
changes implemented in accordance with the Department of  
Defense policy and the 2008 Federal Radio navigation Plan (FRP).  
Changes may affect the performance of location-based  
technology on your mobile device.  
Health and Safety Information  
86  
   
Use of AGPS in Emergency Calls  
Emergency Calls  
When you make an emergency call, the cellular network may  
activate AGPS technology in your mobile device to tell the  
emergency responders your approximate location.  
This mobile device, like any wireless mobile device, operates  
using radio signals, wireless and landline networks, as well as  
user-programmed functions, which cannot guarantee connection  
in all conditions, areas, or circumstances. Therefore, you should  
never rely solely on any wireless mobile device for essential  
communications (medical emergencies, for example). Before  
traveling in remote or underdeveloped areas, plan an alternate  
method of contacting emergency services personnel. Remember,  
to make or receive any calls, the mobile device must be switched  
on and in a service area with adequate signal strength.  
AGPS has limitations and might not work in your area. Therefore:  
Always tell the emergency responder your location to the best of your  
ability; and  
Remain on the mobile device for as long as the emergency responder  
instructs you.  
Navigation  
Maps, directions, and other navigation data may contain  
inaccurate or incomplete data, and circumstances can and do  
change over time. In some areas, complete information may not  
be available. Therefore, you should always visually confirm that  
the navigational instructions are consistent with what you see  
before following them. All users should pay attention to road  
conditions, closures, traffic, and all other factors that may impact  
Emergency calls may not be possible on all wireless mobile  
device networks or when certain network services and/or mobile  
device features are in use. Check with local service providers.  
To make an emergency call:  
1. If the mobile device is not on, switch it on.  
2. Key in the emergency number for your present location (for  
example, 911 or other official emergency number).  
Emergency numbers vary by location.  
safe driving or walking. Always obey posted road signs  
.
3. Press  
to place the call.  
87  
   
If certain features are in use (call blocking, for example), you may  
first need to deactivate those features before you can make an  
emergency call. Consult your User Manual and your local cellular  
service provider. When making an emergency call, remember to  
give all the necessary information as accurately as possible.  
Remember that your mobile device may be the only means of  
communication at the scene of an accident; do not cut off the call  
until given permission to do so.  
Extreme heat or cold  
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.  
Microwaves  
Do not try to dry your mobile device in a microwave oven.  
Doing so may cause a fire or explosion.  
Dust and dirt  
Do not expose your mobile device to dust, dirt, or sand.  
Care and Maintenance  
Cleaning solutions  
Your mobile device is a product of superior design and  
craftsmanship and should be treated with care. The suggestions  
below will help you fulfill any warranty obligations and allow you  
to enjoy this product for many years:  
Do not use harsh chemicals, cleaning solvents, or strong  
detergents to clean the mobile device. Wipe it with a soft cloth  
slightly dampened in a mild soap-and-water solution.  
Shock or vibration  
Keep your Samsung Mobile Device away from:  
Liquids of any kind  
Do not drop, knock, or shake the mobile device. Rough  
handling can break internal circuit boards.  
Keep the mobile device dry. Precipitation, humidity, and liquids  
contain minerals that will corrode electronic circuits. If the  
mobile device does get wet, do not accelerate drying with the  
use of an oven, microwave, or dryer, because this may damage  
the mobile device and could cause a fire or explosion. Do not  
use the mobile device with a wet hand. Doing so may cause an  
electric shock to you or damage to the mobile device.  
Paint  
Do not paint the mobile device. Paint can clog the device’s  
moving parts or ventilation openings and prevent proper  
operation.  
Health and Safety Information  
88  
   
Always turn the volume down before plugging the earphones into an  
audio source.  
Responsible Listening  
Caution!: Avoid potential hearing loss  
.
Set the volume in a quiet environment and select the lowest volume at  
which you can hear adequately.  
Damage to hearing occurs when a person is exposed to loud  
sounds over time. The risk of hearing loss increases as sound is  
played louder and for longer durations. Prolonged exposure to  
loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that  
using portable audio devices, such as portable music players and  
cell phones, at high volume settings for long durations may lead  
to permanent noise-induced hearing loss. This includes the use  
of headphones (including headsets, earbuds, and Bluetooth® or  
other wireless devices). Exposure to very loud sound has also  
been associated in some studies with tinnitus (a ringing in the  
ear), hypersensitivity to sound, and distorted hearing. Individual  
susceptibility to noise-induced hearing loss and potential hearing  
problem varies. Additionally, the amount of sound produced by a  
portable audio device varies depending on the nature of the  
sound, the device settings, and the headphones that are used. As  
a result, there is no single volume setting that is appropriate for  
everyone or for every combination of sound, settings, and  
equipment.  
Be aware that you can adapt to higher volume settings over time, not  
realizing that the higher volume may be harmful to your hearing.  
When using headphones, turn the volume down if you cannot hear the  
people speaking near you or if the person sitting next to you can hear  
what you are listening to.  
Do not turn the volume up to block out noisy surroundings. If you  
choose to listen to your portable device in a noisy environment, use  
noise-cancelling headphones to block out background environmental  
noise. By blocking background environment noise, noise cancelling  
headphones should allow you to hear the music at lower volumes than  
when using earbuds.  
Limit the amount of time you listen. As the volume increases, less time  
is required before you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such  
as rock concerts, that might cause temporary hearing loss. Temporary  
hearing loss might cause unsafe volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you  
experience ringing in your ears, hear muffled speech, or experience  
any temporary hearing difficulty after listening to your portable audio  
device, discontinue use and consult your doctor.  
You should follow some common sense recommendations when  
using any portable audio device:  
89  
   
You can obtain additional information on this subject from the  
following sources:  
National Institute for Occupational Safety and Health  
(NIOSH)  
395 E Street, S.W.  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
Voice: (800) 222-2336  
Voice: 1-800-35-NIOSH (1-800-356-4674)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
National Institute on Deafness and Other Communication  
Disorders  
1-888-232-6348 TTY  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Operating Environment  
Remember to follow any special regulations in force in any area,  
and always switch your mobile device off whenever it is  
forbidden to use it, or when it may cause interference or danger.  
When connecting the mobile device or any accessory to another  
device, read its user's guide for detailed safety instructions. Do  
not connect incompatible products.  
Health and Safety Information  
90  
   
Using Your Mobile Device Near Other Electronic Devices  
Should read and follow the directions from the manufacturer of your  
implantable medical device. If you have any questions about using  
your wireless mobile device with an implantable medical device,  
consult your health care provider.  
Most modern electronic equipment is shielded from Radio  
Frequency (RF) signals. However, certain electronic equipment  
may not be shielded against the RF signals from your wireless  
mobile device. Consult the manufacturer to discuss alternatives.  
For more information see: http://www.fcc.gov/oet/rfsafety/rf-  
.
Implantable Medical Devices  
Other Medical Devices  
A minimum separation of six (6) inches should be maintained  
between a handheld wireless mobile device and an implantable  
medical device, such as a pacemaker or implantable cardioverter  
defibrillator, to avoid potential interference with the device.  
If you use any other personal medical devices, consult the  
manufacturer of your device to determine if it is adequately  
shielded from external RF energy. Your physician may be able to  
assist you in obtaining this information. Switch your mobile  
device off in health care facilities when any regulations posted in  
these areas instruct you to do so. Hospitals or health care  
facilities may be using equipment that could be sensitive to  
external RF energy.  
Persons who have such devices:  
Should ALWAYS keep the mobile device more than six (6) inches from  
their implantable medical device when the mobile device is turned ON;  
Should not carry the mobile device in a breast pocket;  
Should use the ear opposite the implantable medical device to  
minimize the potential for interference;  
Vehicles  
RF signals may affect improperly installed or inadequately  
shielded electronic systems in motor vehicles. Check with the  
manufacturer or its representative regarding your vehicle before  
using your mobile device in a motor vehicle. You should also  
consult the manufacturer of any equipment that has been added  
to your vehicle.  
Should turn the mobile device OFF immediately if there is any reason  
to suspect that interference is taking place;  
91  
Posted Facilities  
FCC Hearing Aid Compatibility (HAC)  
Regulations for Wireless Devices  
On July 10, 2003, the U.S. Federal Communications Commission  
(FCC) Report and Order in WT Docket 01-309 modified the  
exception of wireless mobile devices under the Hearing Aid  
Compatibility Act of 1988 (HAC Act) to require digital wireless  
mobile devices be compatible with hearing aids.  
Switch your mobile device off in any facility where posted notices  
require you to do so.  
Potentially Explosive Environments  
Switch your mobile device off when in any area with a potentially  
explosive atmosphere and obey all signs and instructions. Sparks  
in such areas could cause an explosion or fire resulting in bodily  
injury or even death. Users are advised to switch the mobile  
device off while at a refueling point (service station). Users are  
reminded of the need to observe restrictions on the use of radio  
equipment in fuel depots (fuel storage and distribution areas),  
chemical plants, or where blasting operations are in progress.  
Areas with a potentially explosive atmosphere are often, but not  
always, clearly marked. They include below deck on boats,  
chemical transfer or storage facilities, vehicles using liquefied  
petroleum gas (such as propane or butane), areas where the air  
contains chemicals or particles, such as grain, dust, or metal  
powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
The intent of the HAC Act is to ensure reasonable access to  
telecommunications services for persons with hearing  
disabilities. While some wireless mobile devices are used near  
some hearing devices (hearing aids and cochlear implants),  
users may detect a buzzing, humming, or whining noise. Some  
hearing devices are more immune than others to this  
interference noise, and mobile devices also vary in the amount of  
interference they generate.  
The wireless telephone industry has developed a rating system  
for wireless mobile devices to assist hearing device users find  
mobile devices that may be compatible with their hearing  
devices. Not all mobile devices have been rated. Mobile devices  
that are rated have the rating on their box or a label located on  
the box.  
Health and Safety Information  
92  
   
The ratings are not guarantees. Results will vary depending on  
the user's hearing device and hearing loss. If your hearing device  
happens to be vulnerable to interference, you may not be able to  
use a rated mobile device successfully. Trying out the mobile  
device with your hearing device is the best way to evaluate it for  
your personal needs.  
A sum of 5 is considered acceptable for normal use. A sum of 6  
is considered for best use.  
M-Ratings: Mobile devices rated M3 or M4 meet FCC  
requirements and are likely to generate less interference to  
hearing devices than mobile devices that are not labeled. M4 is  
the better/higher of the two ratings.  
T3  
+
T2  
=
5
M3  
+
M2  
=
5
In the above example, if a hearing aid meets the M2 level rating  
and the wireless mobile device meets the M3 level rating, the  
sum of the two values equal M5. This is synonymous for T  
ratings. This should provide the hearing aid user with “normal  
usage” while using their hearing aid with the particular wireless  
mobile device.  
T-Ratings: Mobile devices rated T3 or T4 meet FCC requirements  
and are likely to generate less interference to hearing devices  
than mobile devices that are not labeled. T4 is the better/higher  
of the two ratings.  
Hearing devices may also be rated. Your hearing device  
manufacturer or hearing health professional may help you find  
this rating. Higher ratings mean that the hearing device is  
relatively immune to interference noise. The hearing aid and  
wireless mobile device rating values are then added together.  
“Normal usage” in this context is defined as a signal quality that  
is acceptable for normal operation. The M mark is intended to be  
synonymous with the U mark. The T mark is intended to be  
synonymous with the UT mark. The M and T marks are  
recommended by the Alliance for Telecommunications Industries  
Solutions (ATIS). The U and UT marks are referenced in Section  
20.19 of the FCC Rules.  
93  
The HAC rating and measurement procedure are described in the  
American National Standards Institute (ANSI) C63.19 standard.  
Only use approved batteries, antennas, and chargers. The use of  
any unauthorized accessories may be dangerous and void the  
mobile device warranty if said accessories cause damage or a  
defect to the mobile device. Although your mobile device is quite  
sturdy, it is a complex piece of equipment and can be broken.  
Avoid dropping, hitting, bending, or sitting on it.  
Restricting Children's Access to Your  
Mobile Device  
Your mobile device is not a toy. Do not allow children to play with  
it because they could hurt themselves and others, damage the  
mobile device, or make calls that increase your mobile device  
bill.  
Other Important Safety Information  
Only qualified personnel should service the mobile device or install the  
mobile device in a vehicle. Faulty installation or service may be  
dangerous and may invalidate any warranty applicable to the device.  
Keep the mobile device and all its parts and accessories out of  
the reach of small children.  
Ensure that any mobile devices or related equipment installed in your  
vehicle are securely mounted.  
FCC Notice and Cautions  
FCC Notice  
Check regularly that all wireless mobile device equipment in your  
vehicle is mounted and operating properly.  
The mobile device may cause TV or radio interference if used in  
close proximity to receiving equipment. The FCC can require you  
to stop using the mobile device if such interference cannot be  
eliminated. Vehicles using liquefied petroleum gas (such as  
propane or butane) must comply with the National Fire Protection  
Standard (NFPA-58). For a copy of this standard, contact the  
National Fire Protection Association.  
Do not store or carry flammable liquids, gases, or explosive materials  
in the same compartment as the mobile device, its parts, or  
accessories.  
For vehicles equipped with an air bag, remember that an air bag  
inflates with great force. Do not place objects, including installed or  
portable wireless equipment near or in the area over the air bag or in  
the air bag deployment area. If wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Cautions  
Any changes or modifications to your mobile device not expressly  
approved in this document could void your warranty for this  
equipment and void your authority to operate this equipment.  
Health and Safety Information  
94  
           
Switch your mobile device off before boarding an aircraft. The use of  
wireless mobile devices in aircraft is illegal and may be dangerous to  
the aircraft's operation. Check with appropriate authorities before  
using any function of a mobile device while on an aircraft.  
Failure to observe these instructions may lead to the suspension or  
denial of cell phone services to the offender, or legal action, or both.  
95  
Section 14: Warranty Information  
Standard Limited Warranty  
scratches, dents and cosmetic damage, unless caused by SAMSUNG; (c)  
defects or damage resulting from excessive force or use of a metallic  
object when pressing on a touch screen; (d) equipment that has the  
serial number or the enhancement data code removed, defaced,  
damaged, altered or made illegible; (e) ordinary wear and tear; (f)  
defects or damage resulting from the use of Product in conjunction or  
connection with accessories, products, or ancillary/peripheral equipment  
not furnished or approved by SAMSUNG; (g) defects or damage resulting  
from improper testing, operation, maintenance, installation, service, or  
adjustment not furnished or approved by SAMSUNG; (h) defects or  
damage resulting from external causes such as collision with an object,  
fire, flooding, dirt, windstorm, lightning, earthquake, exposure to  
weather conditions, theft, blown fuse, or improper use of any electrical  
source; (i) defects or damage resulting from cellular signal reception or  
transmission, or viruses or other software problems introduced into the  
Product; or (j) Product used or purchased outside the United States. This  
Limited Warranty covers batteries only if battery capacity falls below  
80% of rated capacity or the battery leaks, and this Limited Warranty  
does not cover any battery if (i) the battery has been charged by a  
battery charger not specified or approved by SAMSUNG for charging the  
battery; (ii) any of the seals on the battery are broken or show evidence  
of tampering; or (iii) the battery has been used in equipment other than  
the SAMSUNG phone for which it is specified.  
What is Covered and For How Long?  
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")  
warrants to the first consumer purchaser ("Purchaser") that  
SAMSUNG's handsets and accessories ("Products") are free from  
defects in material and workmanship under normal use and  
service for the period commencing upon the date of purchase  
and continuing for the following specified period of time after that  
date:  
Phone  
1 Year  
1 Year  
90 Days  
1 Year  
Batteries  
Case/Pouch/Holster  
Other Phone Accessories  
What is Not Covered?  
This Limited Warranty is conditioned upon proper use of Product by  
Purchaser. This Limited Warranty does not cover: (a) defects or damage  
resulting from accident, misuse, abnormal use, abnormal conditions,  
improper storage, exposure to liquid, moisture, dampness, sand or dirt,  
neglect, or unusual physical, electrical or electromechanical stress; (b)  
Warranty Information  
96  
       
What are SAMSUNG's Obligations?  
Product, please call SAMSUNG Customer Care at 1-888-987-  
4357. If SAMSUNG determines that any Product is not covered  
by this Limited Warranty, Purchaser must pay all parts, shipping,  
and labor charges for the repair or return of such Product.  
During the applicable warranty period, provided the Product is  
returned in accordance with the terms of this Limited Warranty,  
SAMSUNG will repair or replace the Product, without charge to  
Purchaser, or at SAMSUNG'S sole option, refund the purchase  
price. SAMSUNG may, at SAMSUNG's sole option, use rebuilt,  
reconditioned, or new parts or components when repairing any  
Product, or may replace Product with a rebuilt, reconditioned or  
new Product. Repaired/replaced cases, pouches and holsters will  
be warranted for a period of ninety (90) days. All other repaired/  
replaced Products will be warranted for a period equal to the  
remainder of the original Limited Warranty on the original Product  
or for 90 days, whichever is longer. All replaced Products, parts,  
components, boards and equipment shall become the property of  
SAMSUNG. This Limited Warranty is extended to the Purchaser  
and is not transferable or assignable to any other person or  
entity.  
Purchaser should keep a separate backup copy of any contents  
of the Product before delivering the Product to SAMSUNG for  
warranty service, as some or all of the contents may be deleted  
or reformatted during the course of warranty service.  
What Are The Limits On SAMSUNG’s liability?  
THIS LIMITED WARRANTY SETS OUT THE FULL EXTENT OF SAMSUNG'S  
RESPONSIBILITIES, AND THE EXCLUSIVE REMEDY REGARDING THE  
PRODUCTS. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT  
LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS  
FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS  
LIMITED WARRANTY. IN NO EVENT SHALL SAMSUNG BE LIABLE FOR  
DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT OR  
FOR, WITHOUT LIMITATION, COMMERCIAL LOSS OF ANY SORT; LOSS OF  
USE, TIME, DATA, REPUTATION, OPPORTUNITY, GOODWILL, PROFITS OR  
SAVINGS; INCONVENIENCE; INCIDENTAL, SPECIAL, CONSEQUENTIAL OR  
PUNITIVE DAMAGES; OR DAMAGES ARISING FROM THE USE OR  
INABILITY TO USE THE PRODUCT. SOME STATES AND JURISDICTIONS DO  
NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY  
LASTS, OR THE DISCLAIMER OR LIMITATION OF INCIDENTAL OR  
What must you do to obtain warranty service?  
To obtain service under this Limited Warranty, Purchaser must  
return the Product to an authorized phone service facility in an  
adequate container for shipping, accompanied by the sales  
receipt or comparable proof of sale showing the original date of  
purchase, the serial number of the Product and the seller's name  
and address. To obtain assistance on where to deliver the  
97  
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS AND  
DISCLAIMERS MAY NOT APPLY TO YOU.  
What is the procedure for resolving disputes?  
ALL DISPUTES WITH SAMSUNG ARISING IN ANY WAY FROM THIS  
LIMITED WARRANTY OR THE SALE, CONDITION OR  
SAMSUNG MAKES NO WARRANTIES OR REPRESENTATIONS, EXPRESS  
OR IMPLIED, STATUTORY OR OTHERWISE, AS TO THE QUALITY,  
CAPABILITIES, OPERATIONS, PERFORMANCE OR SUITABILITY OF ANY  
THIRD-PARTY SOFTWARE OR EQUIPMENT USED IN CONJUNCTION WITH  
THE PRODUCT, OR THE ABILITY TO INTEGRATE ANY SUCH SOFTWARE OR  
EQUIPMENT WITH THE PRODUCT, WHETHER SUCH THIRD-PARTY  
SOFTWARE OR EQUIPMENT IS INCLUDED WITH THE PRODUCT  
DISTRIBUTED BY SAMSUNG OR OTHERWISE. RESPONSIBILITY FOR THE  
QUALITY, CAPABILITIES, OPERATIONS, PERFORMANCE AND SUITABILITY  
OF ANY SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT RESTS SOLELY  
WITH THE PURCHASER AND THE DIRECT VENDOR, OWNER OR SUPPLIER  
OF SUCH THIRD-PARTY SOFTWARE OR EQUIPMENT.  
PERFORMANCE OF THE PRODUCTS SHALL BE RESOLVED  
EXCLUSIVELY THROUGH FINAL AND BINDING ARBITRATION, AND  
NOT BY A COURT OR JURY. Any such dispute shall not be  
combined or consolidated with a dispute involving any other  
person's or entity's Product or claim, and specifically, without  
limitation of the foregoing, shall not under any circumstances  
proceed as part of a class action. The arbitration shall be  
conducted before a single arbitrator, whose award may not  
exceed, in form or amount, the relief allowed by the applicable  
law. The arbitration shall be conducted according to the  
American Arbitration Association (AAA) Commercial Arbitration  
Rules applicable to consumer disputes. This arbitration provision  
is entered pursuant to the Federal Arbitration Act. The laws of the  
State of Texas, without reference to its choice of laws principles,  
shall govern the interpretation of the Limited Warranty and all  
disputes that are subject to this arbitration provision. The  
arbitrator shall decide all issues of interpretation and application  
of this arbitration provision and the Limited Warranty.  
Nothing in the Product instructions or information shall be construed to  
create an express warranty of any kind with respect to the Products. No  
agent, employee, dealer, representative or reseller is authorized to  
modify or extend this Limited Warranty or to make binding  
representations or claims, whether in advertising, presentations or  
otherwise, on behalf of SAMSUNG regarding the Products or this Limited  
Warranty.  
This Limited Warranty gives you specific legal rights, and you may also  
have other rights that vary from state to state.  
Warranty Information  
98  
For any arbitration in which the Purchaser's total damage claims,  
exclusive of attorney fees and expert witness fees, are $5,000.00  
or less ("Small Claim"), the arbitrator may, if the Purchaser  
prevails, award the Purchaser's reasonable attorney fees, expert  
witness fees and costs as part of any award, but may not grant  
SAMSUNG its attorney fees, expert witness fees or costs unless it  
is determined that the claim was brought by the Purchaser in bad  
faith. In a Small Claim case, the Purchaser shall be required to  
pay no more than half of the total administrative, facility and  
arbitrator fees, or $50.00 of such fees, whichever is less, and  
SAMSUNG shall pay the remainder of such fees. Administrative,  
facility and arbitrator fees for arbitrations in which the  
Purchaser's total damage claims, exclusive of attorney fees and  
expert witness fees, exceed $5,000.00 ("Large Claim") shall be  
determined according to AAA rules. In a Large Claim case, the  
arbitrator may grant to the prevailing party, or apportion among  
the parties, reasonable attorney fees, expert witness fees and  
costs. Judgment may be entered on the arbitrator's award in any  
court of competent jurisdiction.  
Purchaser may opt out of this dispute resolution procedure by  
providing notice to SAMSUNG no later than 30 calendar days  
from the date of Purchaser's original purchase of the Product. To  
opt out, Purchaser must send notice by e-mail to  
[email protected], with the subject line: "Arbitration Opt  
Out." Purchaser must include in the opt out e-mail (a)  
Purchaser's name and address; (b) the date on which the Product  
was purchased; (c) the Product model name or model number;  
and (d) the IMEI or MEID or Serial Number, as applicable, if  
Purchaser has it (the IMEI or MEID or Serial Number can be found  
(i) on the Product box; (ii) on the Product information screen,  
which can be found under "Settings;" (iii) on a label on the back  
of the Product beneath the battery, if the battery is removable;  
and (iv) on the outside of the Product if the battery is not  
removable). Alternatively, Purchaser may opt out by calling 1-  
888-987-4357 and providing the same information. These are  
the only two forms of notice that will be effective to opt out of this  
dispute resolution procedure. Opting out of this dispute resolution  
procedure will not affect the coverage of the Limited Warranty in  
any way, and Purchaser will continue to enjoy the benefits of the  
Limited Warranty.  
This arbitration provision also applies to claims against  
SAMSUNG'S employees, representatives and affiliates if any  
such claim arises from the Product's sale, condition or  
performance.  
99  
Severability  
End User License Agreement for Software  
If any portion of this Limited Warranty is held to be illegal or  
unenforceable, such partial illegality or unenforceability shall not  
affect the enforceability of the remainder of the Limited Warranty.  
IMPORTANT. READ CAREFULLY: This End User License Agreement  
("EULA") is a legal agreement between you (either an individual  
or a single entity) and Samsung Electronics Co., Ltd. for software  
owned by Samsung Electronics Co., Ltd. and its affiliated  
companies and its third party suppliers and licensors that  
accompanies this EULA, which includes computer software and  
may include associated media, printed materials, "online" or  
electronic documentation ("Software"). BY CLICKING THE "I  
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE  
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,  
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO  
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT  
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE  
"DECLINE" BUTTON, AND DISCONTINUE USE OF THE SOFTWARE.  
Samsung Telecommunications America, LLC  
1301 E. Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG  
Phone: 1-888-987-HELP (4357)  
©2011 Samsung Telecommunications America, LLC. All rights reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change without  
notice. [050611]  
1. GRANT OF LICENSE. Samsung grants you the following rights  
provided that you comply with all terms and conditions of this  
EULA: You may install, use, access, display and run one copy of  
the Software on the local hard disk(s) or other permanent storage  
media of one computer and use the Software on a single  
computer or a mobile device at a time, and you may not make  
the Software available over a network where it could be used by  
multiple computers at the same time. You may make one copy of  
the Software in machine-readable form for backup purposes  
Warranty Information  
100  
 
only; provided that the backup copy must include all copyright or  
other proprietary notices contained on the original.  
5. UPGRADES. This EULA applies to updates, supplements and  
add-on components (if any) of the Software that Samsung may  
provide to you or make available to you after the date you obtain  
your initial copy of the Software, unless we provide other terms  
along with such upgrade. To use Software identified as an  
upgrade, you must first be licensed for the Software identified by  
Samsung as eligible for the upgrade. After upgrading, you may  
no longer use the Software that formed the basis for your  
upgrade eligibility.  
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves  
all rights not expressly granted to you in this EULA. The Software  
is protected by copyright and other intellectual property laws and  
treaties. Samsung or its suppliers own the title, copyright and  
other intellectual property rights in the Software. The Software is  
licensed, not sold.  
3. LIMITATIONS ON END USER RIGHTS. You may not reverse  
engineer, decompile, disassemble, or otherwise attempt to  
discover the source code or algorithms of, the Software (except  
and only to the extent that such activity is expressly permitted by  
applicable law notwithstanding this limitation), or modify, or  
disable any features of, the Software, or create derivative works  
based on the Software. You may not rent, lease, lend, sublicense  
or provide commercial hosting services with the Software.  
6. SOFTWARE TRANSFER. You may not transfer this EULA or the  
rights to the Software granted herein to any third party unless it  
is in connection with the sale of the mobile device which the  
Software accompanied. In such event, the transfer must include  
all of the Software (including all component parts, the media and  
printed materials, any upgrades, this EULA) and you may not  
retain any copies of the Software. The transfer may not be an  
indirect transfer, such as a consignment. Prior to the transfer, the  
end user receiving the Software must agree to all the EULA  
terms.  
4. CONSENT TO USE OF DATA. You agree that Samsung and its  
affiliates may collect and use technical information gathered as  
part of the product support services related to the Software  
provided to you, if any, related to the Software. Samsung may  
use this information solely to improve its products or to provide  
customized services or technologies to you and will not disclose  
this information in a form that personally identifies you.  
7. EXPORT RESTRICTIONS. You acknowledge that the Software is  
subject to export restrictions of various countries. You agree to  
comply with all applicable international and national laws that  
apply to the Software, including the U.S. Export Administration  
Regulations, as well as end user, end use, and destination  
restrictions issued by U.S. and other governments.  
101  
8. TERMINATION. This EULA is effective until terminated. Your  
rights under this License will terminate automatically without  
notice from Samsung if you fail to comply with any of the terms  
and conditions of this EULA. Upon termination of this EULA, you  
must cease all use of the Software and destroy all copies, full or  
partial, of the Software.  
party or its products and services. Purchaser agrees that  
SAMSUNG shall not be responsible or liable, directly or indirectly,  
for any damage or loss caused or alleged to caused by, or in  
connection with, use of or reliance on any such third-party  
content, products, or services available on or through any such  
application. Purchaser acknowledges and agrees that your use  
of any third-party application is governed by such third-party  
application provider's Terms of Use, License Agreement, Privacy  
Policy, or other such agreement and that any information or  
personal data you provide, whether knowingly or unknowingly, to  
such third-party application provider, will be subject to such  
third-party application provider's privacy policy, if such a policy  
exists. SAMSUNG DISCLAIMS ANY RESPONSIBILITY FOR ANY  
DISCLOSURE OF INFORMATION OR ANY OTHER PRACTICES OF  
ANY THIRD-PARTY APPLICATION PROVIDER.  
9. THIRD-PARTY APPLICATIONS. Certain third-party applications  
may be included with, or downloaded to this mobile device.  
SAMSUNG makes no representations whatsoever about any of  
these applications. Since SAMSUNG has no control over such  
applications, Purchaser acknowledges and agrees that  
SAMSUNG is not responsible for the availability of such  
applications and is not responsible or liable for any content,  
advertising, products, services, or other materials on or available  
from such applications. Purchaser expressly acknowledges and  
agrees that use of third-party applications is at Purchaser's sole  
risk and that the entire risk of unsatisfactory quality,  
10. Disclaimer of Warranty Regarding Third-Party Applications.  
SAMSUNG DOES NOT WARRANT OR MAKE ANY  
performance, accuracy and effort is with Purchaser. It is up to  
Purchaser to take precautions to ensure that whatever Purchaser  
selects to use is free of such items as viruses, worms, Trojan  
horses, and other items of a destructive nature. References on  
this mobile device to any names, marks, products, or services of  
any third-parties are provided solely as a convenience to  
Purchaser, and do not constitute or imply an endorsement,  
sponsorship, or recommendation of, or affiliation with the third-  
REPRESENTATIONS REGARDING THE AVAILABILITY, USE,  
TIMELINESS, SECURITY, VALIDITY, ACCURACY, OR RELIABILITY OF,  
OR THE RESULTS OF THE USE OF, OR OTHERWISE RESPECTING,  
THE CONTENT OF ANY THIRD-PARTY APPLICATION WHETHER  
SUCH THIRD-PARTY APPLICATION IS INCLUDED WITH THE  
PRODUCT DISTRIBUTED BY SAMSUNG, IS DOWNLOADED, OR  
OTHERWISE OBTAINED. USE OF ANY THIRD-PARTY APPLICATION  
IS DONE AT PURCHASER'S OWN DISCRETION AND RISK AND  
Warranty Information  
102  
PURCHASER IS SOLELY RESPONSIBLE FOR ANY DAMAGE TO  
YOUR MOBILE DEVICE OR LOSS OF DATA THAT RESULTS FROM  
THE DOWNLOADING OR USE OF SUCH THIRD-PARTY  
APPLICATIONS. SAMSUNG EXPRESSLY DISCLAIMS ANY  
WARRANTY REGARDING WHETHER PURCHASER'S PERSONAL  
INFORMATION IS CAPTURED BY ANY THIRD-PARTY APPLICATION  
PROVIDER OR THE USE TO WHICH SUCH PERSONAL  
ERROR-FREE, OR THAT DEFECTS IN THE THIRD-PARTY  
APPLICATION WILL BE CORRECTED. PURCHASER ASSUMES THE  
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR, OR  
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW  
EXCLUSIONS OR LIMITATIONS ON HOW LONG AN IMPLIED  
WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS  
MAY NOT APPLY TO YOU. NO ADVICE OR INFORMATION,  
WHETHER ORAL OR WRITTEN, OBTAINED BY PURCHASER FROM  
SAMSUNG SHALL BE DEEMED TO ALTER THIS DISCLAIMER OF  
WARRANTY REGARDING THIRD-PARTY APPLICATIONS, OR TO  
CREATE ANY WARRANTY.  
INFORMATION MAY BE PUT BY SUCH THIRD-PARTY APPLICATION  
PROVIDER. ANY THIRD-PARTY APPLICATIONS PROVIDED WITH  
THIS MOBILE DEVICE ARE PROVIDED "AS IS" AND ON AN "AS  
AVAILABLE" BASIS, WITHOUT WARRANTIES OF ANY KIND FROM  
SAMSUNG, EITHER EXPRESS OR IMPLIED. TO THE FULLEST  
EXTENT POSSIBLE PURSUANT TO APPLICABLE LAW, SAMSUNG  
DISCLAIMS ALL WARRANTIES EXPRESS, IMPLIED, OR  
STATUTORY, INCLUDING, BUT NOT LIMITED TO, IMPLIED  
WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY OR  
WORKMANLIKE EFFORT, FITNESS FOR A PARTICULAR PURPOSE,  
RELIABILITY OR AVAILABILITY, ACCURACY, LACK OF VIRUSES,  
QUIET ENJOYMENT, NON-INFRINGEMENT OF THIRD PARTY  
RIGHTS OR OTHER VIOLATION OF RIGHTS. SAMSUNG DOES NOT  
WARRANT AGAINST INTERFERENE WITH YOUR ENJOYMENT OF  
THE THRID-PARTY APPLICATION, THAT THE FUNCTIONS  
CONTAINED IN THE THIRD-PARTY APPLICATION WILL MEET  
PURCHASER'S REQUIREMENTS, THAT THE OPERATION OF THE  
THIRD-PARTY APPLICATION WILL BE UNINTERRUPTED OR  
11. Limitation of Liability. SAMSUNG WILL NOT BE LIABLE FOR  
ANY DAMAGES OF ANY KIND ARISING OUT OF OR RELATING TO  
THE USE OR THE INABILITY TO USE ANY THIRD-PARTY  
APPLICATION, ITS CONTENT OR FUNCTIONALITY, INCLUDING BUT  
NOT LIMITED TO DAMAGES CAUSED BY OR RELATED TO  
ERRORS, OMISSIONS, INTERRUPTIONS, DEFECTS, DELAY IN  
OPERATION OR TRANSMISSION, COMPUTER VIRUS, FAILURE TO  
CONNECT, NETWORK CHARGES, AND ALL OTHER DIRECT,  
INDIRECT, SPECIAL, INCIDENTAL, EXEMPLARY, OR  
CONSEQUENTIAL DAMAGES EVEN IF SAMSUNG HAS BEEN  
ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME  
JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION  
OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE  
LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.  
103  
NOTWITHSTANDING THE FOREGOING, SAMSUNG'S TOTAL  
LIABILITY TO PURCHASER FOR ALL LOSSES, DAMAGES, CAUSES  
OF ACTION, INCLUDING BUT NOT LIMITED TO THOSE BASED ON  
CONTRACT, TORT, OR OTHERWISE, ARISING OUT OF  
PURCHASER'S USE OF THIRD-PARTY APPLICATIONS ON THIS  
MOBILE DEVICE, OR ANY OTHER PROVISION OF THIS EULA,  
SHALL NOT EXCEED THE AMOUNT PURCHASER PAID  
SPECIFICALLY FOR ANY SUCH THIRD-PARTY APPLICATION THAT  
WAS INCLUDED WITH THIS MOBILE DEVICE. THE FOREGOING  
LIMITATIONS, EXCLUSIONS, AND DISCLAIMERS (INCLUDING  
SECTIONS 9, 10, AND 11) SHALL APPLY TO THE MAXIMUM  
EXTENT PERMITTED BY APPLICABLE LAW, EVEN IF ANY REMEDY  
FAILS ITS ESSENTIAL PURPOSE.  
Arbitration Board. The award of arbitration shall be final and  
binding upon the parties.  
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire  
agreement between you and Samsung relating to the Software  
and supersedes all prior or contemporaneous oral or written  
communications, proposals and representations with respect to  
the Software or any other subject matter covered by this EULA. If  
any provision of this EULA is held to be void, invalid,  
unenforceable or illegal, the other provisions shall continue in full  
force and effect.  
Precautions for Transfer and Disposal  
If data stored on this device is deleted or reformatted using the  
standard methods, the data only appears to be removed on a  
superficial level, and it may be possible for someone to retrieve  
and reuse the data by means of special software.  
12. U.S. GOVERNMENT END USERS. The Software is licensed  
only with "restricted rights" and as "commercial items"  
consisting of "commercial software" and "commercial software  
documentation" with only those rights as are granted to all other  
end users pursuant to the terms and conditions herein.  
To avoid unintended information leaks and other problems of this  
sort, it is recommended that the device be returned to Samsung’s  
Customer Care Center for an Extended File System (EFS) Clear  
which will eliminate all user memory and return all settings to  
default settings. Please contact the Samsung Customer Care  
Center for details.  
13. APPLICABLE LAW. This EULA is governed by the laws of  
TEXAS, without regard to conflicts of laws principles. This EULA  
shall not be governed by the UN Convention on Contracts for the  
International Sale of Goods, the application of which is expressly  
excluded. If a dispute, controversy or difference is not amicably  
settled, it shall be finally resolved by arbitration in Seoul, Korea in  
accordance with the Arbitration Rules of the Korean Commercial  
Warranty Information  
104  
Important!: Please provide warranty information (proof of purchase) to  
Samsung’s Customer Care Center in order to provide this service  
at no charge. If the warranty has expired on the device, charges  
may apply.  
Customer Care Center:  
1000 Klein Rd.  
Plano, TX 75074  
Toll Free Tel: 1.888.987.HELP (4357)  
Samsung Telecommunications America, LLC:  
1301 East Lookout Drive  
Richardson, Texas 75082  
Phone: 1-800-SAMSUNG (726-7864)  
Important!: If you are using a handset other than a standard numeric keypad,  
dial the numbers listed in brackets.  
Phone: 1-888-987-HELP (4357)  
©2011 Samsung Telecommunications America. All rights  
reserved.  
No reproduction in whole or in part allowed without prior written  
approval. Specifications and availability subject to change  
without notice.  
105  
Index  
Registered List 63  
Settings 63  
Turn Bluetooth On/Off 62  
Adding 43  
Deleting 50  
Editing 44  
Erase All 71  
Finding 42  
Groups 48  
Memory Info 50  
Saving Call Numbers 45  
Speed Dial 46  
D
Display 66  
Display / Touch-Screen 85  
Display Settings  
A
Accessing Contacts 42  
Accessing Messages 33  
Accessing Your Phone’s Settings 66  
Adding a New Contacts Entry  
Dial Method 43  
Menu Method 44  
Adjust  
C
Calculator 64  
Call Answer 68  
Call Functions  
answering a call 26  
answering Call-Waiting calls 27  
Call In-Progress options 27  
Making a Call 25  
sending calls to Voicemail 26  
Voice Commands 27  
Call Settings  
Auto Answer 68  
Auto Retry 68  
Call Answer 68  
TTY Mode 69  
Camera Mode 18, 51  
Care and Maintenance 88  
Change Lock 70  
Children and Cell Phones 79  
Contacts  
Key Tone 67  
Alerts 67  
Answering a Call 26  
Auto Answer 68  
Auto Retry 68  
Backlight 67  
Wallpaper 66  
Do cell phones pose a health hazard?  
Draft Folder 38  
B
Backlight 67  
Battery  
charging 8  
installing 7  
Draft Messages 38  
Low Battery Indicator 9  
removing 7  
Battery Use & Safety 83  
Bluetooth 62  
E
Emergency 70, 71  
Emergency #s in Lock Mode 71  
Emergency Calls 87  
Add New Device 62  
106  
   
Emergency Numbers 70  
Entering Text 23  
Erase All Entry 71  
Erase Messages 40  
Exit metroWeb 59  
Exposure to Radio Frequency (RF) Sig-  
nals 75  
Number Type 43, 45, 46  
Inbox Folder 36  
L
Messages  
Creating 33  
Messages and Lock Mode 36  
Messaging  
Picture Messages 34  
types of messages 33  
metroWeb  
How metroWeb Keys Work 60  
Launching metroWeb 59  
Using Links 59  
Language 69  
Lock Code, Changing 70  
Lock Phone 70  
M
Managing Outbox Messages 37  
Master Volume 67  
Memory Card  
formatting 11  
installing 10  
removing 11  
Memory Info 74  
Memory Management 74  
Message Folder  
Draft Box 38  
Inbox 36  
Outbox 37  
Voice 40  
Voicemail 40  
Message folder  
outbox 37  
Message Folders  
Erase Messages 40  
F
FCC Hearing Aid Compatibility (HAC)  
Regulations for Wireless Devices 92  
FCC Notice and Cautions 94  
G
Gallery  
Image 56  
Games & Apps 60  
Getting Started  
Activating Your Phone 9  
Understanding this User Manual 4  
Voicemail 10  
GPS & AGPS 86  
GPS Setting 66  
H
Using metroWeb 59  
Mode  
Speakerphone 20  
Msg Setting Sub Menu 41  
N
Navigator 61  
Notes and Tips 4  
Notes, Description 4  
Number Type Icons 43, 45, 46  
O
Operating Environment 90  
Other Important Safety Information 94  
Outbox Folder 37  
Health and Safety Information 75  
I
Icons  
Outbox, Managing Messages 37  
107  
Mobile device 94  
Restriction 71  
Ringer Type 67  
TTY Mode 69  
Wallpaper 66  
Settings Menu  
Accessing 66  
P
Pause Dial 25  
Phone  
S
Command Keys 17  
Display Screen 21  
Display Screen Icons 21  
Phone Settings  
Airplane Mode 69  
Language 69  
Shortcut to Menus 19  
Smart Practices While Driving 81  
Sound Settings  
Master Volume 67  
Ringer Type 67  
Specific Absorption Rate (SAR) Certifi-  
cation Information 80  
Standard Limited Warranty  
Store Emergency #s 71  
Store Numbers After a Call 45  
T
Text Conventions 5  
Text Messages, Receiving 35  
Three-Way Calling 25  
Tip, Description 4  
Tools  
Samsung Mobile Products and Recy-  
cling 84  
Save a Number After a Call 45  
Security Settings  
Change Lock 70  
Emergency # 70  
Erase All Entries 71  
Lock Phone 70  
Reset Phone 71  
Restriction 71  
Security Sub Menu 70  
Settings  
Auto Answer 68  
Auto Retry 68  
Backlight 67  
Call Answer 68  
Language 69  
Quick Search 73  
Security 70  
System Select 72  
Photos  
Sending 51  
Taking Snap Shots 51  
Picture Messages  
creating and sending 34  
R
Receive Text Messages 35  
Reducing Exposure  
Hands-Free Kits and Other  
Accessories 78  
Location Setting 66  
Master Volume 67  
Memory Info 74  
Ringer Type 67  
Alarm Clock 64  
Bluetooth 62  
Calculator 64  
Converter 65  
Reset Your Phone 71  
Responsible Listening 89  
Restricting Children's Access to Your  
108  
Memo Pad 64  
Tip Calculator 65  
Voicemail  
Checking 40  
Voice Commands 27  
World Clock 64  
Folder 40  
Listening to 10  
TTY Mode 69  
W
U
Wallpaper 66  
UL Certified Travel Charger 85  
Understanding Your Contacts  
Adding a New Contacts Entry 43  
Contacts Groups 48  
Deleting a Contacts Entry 50  
Editing an Existing Contacts Entry  
Warranty Information 96  
Finding a Contacts Entry 42  
Memory Info 50  
Save a Number After a Call 45  
Speed Dial 46  
V
Voice Commands 27  
calling 28  
checking status 30  
look up 29  
opening menus or applications 29  
sending messages 28, 29  
settings 30  
109  

Toshiba Canvio Hard Drive HDTC615XK3B1 User Manual
Sony Mobile Xperia T Smartphone 12728675 User Manual
Sony Dream Machine ICF C60LRC User Manual
Sony CDP 608ESD User Manual
Slick EDIT V33 User Manual
Seagate BARRACUDA ST3750640AS User Manual
Rancilio epoca User Manual
Pioneer DVR 107 User Manual
Pioneer DEH 1330R User Manual
Oregon Scientific EB833 User Manual